MMPF-MIB

File: MMPF-MIB.mib (588559 bytes)

Imported modules

RFC1155-SMI SNMPv2-SMI SNMPv2-TC
RFC-1212 RFC1253-MIB RFC-1215

Imported symbols

mgmt NetworkAddress IpAddress
Counter Gauge TimeTicks
Integer32 Gauge32 TimeStamp
PhysAddress OBJECT-TYPE TruthValue
TRAP-TYPE

Defined Objects

org 1.3
OBJECT IDENTIFIER    

dod 1.3.6
OBJECT IDENTIFIER    

internet 1.3.6.1
OBJECT IDENTIFIER    

private 1.3.6.1.4
OBJECT IDENTIFIER    

enterprises 1.3.6.1.4.1
OBJECT IDENTIFIER    

nec 1.3.6.1.4.1.119
OBJECT IDENTIFIER    

necProduct 1.3.6.1.4.1.119.1
OBJECT IDENTIFIER    

datax 1.3.6.1.4.1.119.1.3
OBJECT IDENTIFIER    

mmpf 1.3.6.1.4.1.119.1.3.13
OBJECT IDENTIFIER    

mmn9110 1.3.6.1.4.1.119.1.3.13.1
OBJECT IDENTIFIER    

fanUnitFault 1.3.6.1.4.1.119.1.3.13.1.170001
This trap is issued when a fan is failured.
TRAP-TYPE    
  mpEventTimeStamp  
  mpEventSeverity  
  mpEventDescription  
  mpSysFanType  

temperatureFault 1.3.6.1.4.1.119.1.3.13.1.170002
This trap is issured when a temperature become abnormal.
TRAP-TYPE    
  mpEventTimeStamp  
  mpEventSeverity  
  mpEventDescription  
  mpSysTempType  

voltageFault 1.3.6.1.4.1.119.1.3.13.1.170003
This trap is issued when a voltage is failured.
TRAP-TYPE    
  mpEventTimeStamp  
  mpEventSeverity  
  mpEventDescription  
  mpSysVoltageType  

exEquipmentFault 1.3.6.1.4.1.119.1.3.13.1.170004
This trap is issued when a equipment is failured.
TRAP-TYPE    
  mpEventTimeStamp  
  mpEventSeverity  
  mpEventDescription  
  mpSysEqpType  

combusParityError 1.3.6.1.4.1.119.1.3.13.1.170005
This trap is issued when a COM-COM bus parity error is occurred.
TRAP-TYPE    
  mpEventTimeStamp  
  mpEventSeverity  
  mpEventDescription  

combusReadyAlmError 1.3.6.1.4.1.119.1.3.13.1.170006
This trap is issued when a COM-COM bus ready alarm error is occurred.
TRAP-TYPE    
  mpEventTimeStamp  
  mpEventSeverity  
  mpEventDescription  

combrgPciSerrFault 1.3.6.1.4.1.119.1.3.13.1.170007
This trap is issued when a Stby COM-Bridge pci serr is occurred.
TRAP-TYPE    
  mpEventTimeStamp  
  mpEventSeverity  
  mpEventDescription  

versionWriteNg 1.3.6.1.4.1.119.1.3.13.1.170008
This trap is issued when failured to write version at file.
TRAP-TYPE    
  mpEventTimeStamp  
  mpEventSeverity  
  mpEventDescription  

fanUnitFaultRecover 1.3.6.1.4.1.119.1.3.13.1.171001
This trap is issured when a fan is recovered.
TRAP-TYPE    
  mpEventTimeStamp  
  mpEventSeverity  
  mpEventDescription  
  mpSysFanType  

temperatureFaultRecover 1.3.6.1.4.1.119.1.3.13.1.171002
This trap is issured when a temperature is recovered.
TRAP-TYPE    
  mpEventTimeStamp  
  mpEventSeverity  
  mpEventDescription  
  mpSysTempType  

voltageFaultRecover 1.3.6.1.4.1.119.1.3.13.1.171003
This trap is issued when a voltage is recovered.
TRAP-TYPE    
  mpEventTimeStamp  
  mpEventSeverity  
  mpEventDescription  
  mpSysVoltageType  

exEquipmentFaultRecover 1.3.6.1.4.1.119.1.3.13.1.171004
This trap is issued when a equipment is recovered.
TRAP-TYPE    
  mpEventTimeStamp  
  mpEventSeverity  
  mpEventDescription  
  mpSysEqpType  

combusParityErrorRecover 1.3.6.1.4.1.119.1.3.13.1.171005
This trap is issued when a COM-COM bus parity error is recovered.
TRAP-TYPE    
  mpEventTimeStamp  
  mpEventSeverity  
  mpEventDescription  

combusReadyAlmErrorRecover 1.3.6.1.4.1.119.1.3.13.1.171006
This trap is issued when a COM-COM bus ready alarm error is recovered.
TRAP-TYPE    
  mpEventTimeStamp  
  mpEventSeverity  
  mpEventDescription  

combrgPciSerrFaultRecover 1.3.6.1.4.1.119.1.3.13.1.171007
This trap is issued when a Stby COM-Bridge pci serr is recoverd.
TRAP-TYPE    
  mpEventTimeStamp  
  mpEventSeverity  
  mpEventDescription  

versionWriteNgRecover 1.3.6.1.4.1.119.1.3.13.1.171008
This trap is issued when recover from failure status to write version at file.
TRAP-TYPE    
  mpEventTimeStamp  
  mpEventSeverity  
  mpEventDescription  

returnedToOldFiles 1.3.6.1.4.1.119.1.3.13.1.200001
Returned to the previous system files.
TRAP-TYPE    
  mpEventTimeStamp  
  mpEventSeverity  
  mpEventDescription  

supervisorLogin 1.3.6.1.4.1.119.1.3.13.1.1280001
Supervisor logs in the system.
TRAP-TYPE    
  mpEventTimeStamp  
  mpEventSeverity  
  mpEventDescription  

supervisorLoginFailure 1.3.6.1.4.1.119.1.3.13.1.1280002
Supervisor login failure from the system.
TRAP-TYPE    
  mpEventTimeStamp  
  mpEventSeverity  
  mpEventDescription  

supervisorExit 1.3.6.1.4.1.119.1.3.13.1.1281001
Supervisor exits from the system.
TRAP-TYPE    
  mpEventTimeStamp  
  mpEventSeverity  
  mpEventDescription  

mmn9120 1.3.6.1.4.1.119.1.3.13.2
OBJECT IDENTIFIER    

ix5005 1.3.6.1.4.1.119.1.3.13.3
OBJECT IDENTIFIER    

ix5003 1.3.6.1.4.1.119.1.3.13.4
OBJECT IDENTIFIER    

nec-mib 1.3.6.1.4.1.119.2
OBJECT IDENTIFIER    

necProductDepend 1.3.6.1.4.1.119.2.3
OBJECT IDENTIFIER    

datax-mib 1.3.6.1.4.1.119.2.3.3
OBJECT IDENTIFIER    

mmpf-mib 1.3.6.1.4.1.119.2.3.3.13
OBJECT IDENTIFIER    

mpSystem 1.3.6.1.4.1.119.2.3.3.13.1
OBJECT IDENTIFIER    

mpSysSoftwareVersion 1.3.6.1.4.1.119.2.3.3.13.1.1
Indicates the software version number of this equipment
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

mpSysTime 1.3.6.1.4.1.119.2.3.3.13.1.2
It is used to set the date and time to the realtime clock of this equipment
OBJECT-TYPE    
  DateAndTime  

mpSysFanTable 1.3.6.1.4.1.119.2.3.3.13.1.3
Indicates the table of the FAN information of this equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    MpSysFanEntry

mpSysFanEntry 1.3.6.1.4.1.119.2.3.3.13.1.3.1
Indicates the entry of the FAN information of this equipment.
OBJECT-TYPE    
  MpSysFanEntry  

mpSysFanIndex 1.3.6.1.4.1.119.2.3.3.13.1.3.1.1
Indicates the index value to identify the FAN in the equipment uniquely. If machine is 9110, the range is '1' to '6'. If machine is 9120, the range is '1' to '10'.
OBJECT-TYPE    
  INTEGER 1..10  

mpSysFanType 1.3.6.1.4.1.119.2.3.3.13.1.3.1.2
Indicates the character string which describes the FAN type.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

mpSysFanStatus 1.3.6.1.4.1.119.2.3.3.13.1.3.1.3
Indicates the status of the FAN operation. If it is set to '1', the FAN operation is normal. If it is set to '2', the FAN operation is abnormal.
OBJECT-TYPE    
  INTEGER normal(1), abnormal(2)  

mpSysVoltageTable 1.3.6.1.4.1.119.2.3.3.13.1.4
Indicates the information of the voltages of the equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    MpSysVoltageEntry

mpSysVoltageEntry 1.3.6.1.4.1.119.2.3.3.13.1.4.1
Indicates the entry of the information of the voltages of the equipment.
OBJECT-TYPE    
  MpSysVoltageEntry  

mpSysVoltagePackageIndex 1.3.6.1.4.1.119.2.3.3.13.1.4.1.1
Indicates the Index value to identify the COM Package in the equipment uniquely.
OBJECT-TYPE    
  INTEGER com0(1), com1(2)  

mpSysVoltageIndex 1.3.6.1.4.1.119.2.3.3.13.1.4.1.2
Indicates the index value to identify uniquely the voltage provided by the power unit of the equipment.
OBJECT-TYPE    
  INTEGER volt3point3a(1), volt3point3b(2), volt50v(3), volt3point3c(4), volt2point5(5), volt3point3d(6)  

mpSysVoltageType 1.3.6.1.4.1.119.2.3.3.13.1.4.1.3
Indicates the character string which describes the power unit type and com type.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

mpSysVoltageReading 1.3.6.1.4.1.119.2.3.3.13.1.4.1.4
Indicates the observed voltage, in milli-volt (mV).
OBJECT-TYPE    
  INTEGER  

mpSysVoltageStatus 1.3.6.1.4.1.119.2.3.3.13.1.4.1.5
Indicates the statsus of the voltage. If it is set to '1', the voltage is within the normal range. If it is set to '2', the voltage is in the abnormal range.
OBJECT-TYPE    
  INTEGER normal(1), abnormal(2)  

mpSysTempTable 1.3.6.1.4.1.119.2.3.3.13.1.5
Indicates the table of the Temperature information of this equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    MpSysTempEntry

mpSysTempEntry 1.3.6.1.4.1.119.2.3.3.13.1.5.1
Indicates the entry of the information of the temperature of the equipment.
OBJECT-TYPE    
  MpSysTempEntry  

mpSysTempPackageIndex 1.3.6.1.4.1.119.2.3.3.13.1.5.1.1
Indicates the Index value to identify the COM Package in the equipment uniquely.
OBJECT-TYPE    
  INTEGER com0(1), com1(2)  

mpSysTempType 1.3.6.1.4.1.119.2.3.3.13.1.5.1.2
Indicates the character string which describes the com unit type.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

mpSysTempStatus 1.3.6.1.4.1.119.2.3.3.13.1.5.1.3
Indicates the status of the temperature of this equipment inside. If it is set to '1', the temperature is within the normal temperature range. If it is set to '2', the temperrature is in the abnomal range.
OBJECT-TYPE    
  INTEGER normal(1), abnormal(2)  

mpSysTempReading 1.3.6.1.4.1.119.2.3.3.13.1.5.1.4
Indicates the temperature of the equipment inside, in degree (Celusius).
OBJECT-TYPE    
  INTEGER  

mpSysTempMinThresh 1.3.6.1.4.1.119.2.3.3.13.1.5.1.5
Indicates the temperature of the equipment inside, in degree (Celusius).
OBJECT-TYPE    
  INTEGER  

mpSysTempMaxThresh 1.3.6.1.4.1.119.2.3.3.13.1.5.1.6
Indicates the higher threshold of the normal temparature range for the equipment, in degree (Celsius).
OBJECT-TYPE    
  INTEGER  

mpSysEqpTable 1.3.6.1.4.1.119.2.3.3.13.1.6
Indicates the table of the outside equipment information.
OBJECT-TYPE    
  SEQUENCE OF  
    MpSysEqpEntry

mpSysEqpEntry 1.3.6.1.4.1.119.2.3.3.13.1.6.1
Indicates the entry of the outside equipment information.
OBJECT-TYPE    
  MpSysEqpEntry  

mpSysEqpIndex 1.3.6.1.4.1.119.2.3.3.13.1.6.1.1
Indicates the index value to identify the outside equipment uniquely.
OBJECT-TYPE    
  INTEGER equipment0(1), equipment1(2)  

mpSysEqpType 1.3.6.1.4.1.119.2.3.3.13.1.6.1.2
Indicates the character string which describes the external equipment type.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

mpSysEqpStatus 1.3.6.1.4.1.119.2.3.3.13.1.6.1.3
Indicates the status of the outside equipment operation. If it is set to '1', the outside equipment operation is normal. If it is set to '2', the outside equipment operation is abnormal.
OBJECT-TYPE    
  INTEGER normal(1), abnormal(2)  

mpSysCpuUseTable 1.3.6.1.4.1.119.2.3.3.13.1.7
Indicates the table of the percentage of cpu using information.
OBJECT-TYPE    
  SEQUENCE OF  
    MpSysCpuUseEntry

mpSysCpuUseEntry 1.3.6.1.4.1.119.2.3.3.13.1.7.1
Indicates the entry of the percentage of cpu using information.
OBJECT-TYPE    
  MpSysCpuUseEntry  

mpSysCpuUseIndex 1.3.6.1.4.1.119.2.3.3.13.1.7.1.1
Indicates the index value to identify the package in the equipment uniquely.
OBJECT-TYPE    
  INTEGER slot1(1), slot2(2), slot3(3), slot4(4), slot5(5), slot6(6), slot7(7), slot8(8), slot9(9), slot10(10), slot11(11), slot12(12), com0(91), com1(93)  

mpSysCpuTimeIndex 1.3.6.1.4.1.119.2.3.3.13.1.7.1.2
Indicates the index value to identify the time collecting percentage of cpu using uniquely.
OBJECT-TYPE    
  INTEGER seconds5(1), minute1(2), minutes5(3)  

mpSysCpuUseType 1.3.6.1.4.1.119.2.3.3.13.1.7.1.3
Indicates the character string which describes the slot type.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

mpSysCpuTimeType 1.3.6.1.4.1.119.2.3.3.13.1.7.1.4
Indicates the character string which describes the time type of collecting percentage of cpu using.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

mpSysCpuUse 1.3.6.1.4.1.119.2.3.3.13.1.7.1.5
Indicates the percentage of cpu using.
OBJECT-TYPE    
  INTEGER  

mpIfCard 1.3.6.1.4.1.119.2.3.3.13.2
OBJECT IDENTIFIER    

mpIfCardTable 1.3.6.1.4.1.119.2.3.3.13.2.1
A table that contains information about interface card.
OBJECT-TYPE    
  SEQUENCE OF  
    MpIfCardEntry

mpIfCardEntry 1.3.6.1.4.1.119.2.3.3.13.2.1.1
A entry Indicates that contains information about interface card.
OBJECT-TYPE    
  MpIfCardEntry  

mpIfCardSlotNumber 1.3.6.1.4.1.119.2.3.3.13.2.1.1.1
Indicates slot number of the interface card.
OBJECT-TYPE    
  INTEGER  

mpIfCardType 1.3.6.1.4.1.119.2.3.3.13.2.1.1.2
Indicates kind of the interface card.
OBJECT-TYPE    
  INTEGER  

mpIfCardOperSide 1.3.6.1.4.1.119.2.3.3.13.2.1.1.3
Indicates the side which was used for setting up
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

mpIfCardOperVersion 1.3.6.1.4.1.119.2.3.3.13.2.1.1.4
Indicates the firmware version in operation.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

mpIfCardSideAVersion 1.3.6.1.4.1.119.2.3.3.13.2.1.1.5
Indicates the firmware version of side A.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

mpIfCardSideBVersion 1.3.6.1.4.1.119.2.3.3.13.2.1.1.6
Indicates the firmware version of side B.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

mpIfCardBootDpVersion 1.3.6.1.4.1.119.2.3.3.13.2.1.1.7
Indicates the firmware version of BOOT/DP.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

mpEtherPort 1.3.6.1.4.1.119.2.3.3.13.3
OBJECT IDENTIFIER    

mpEtherPortTable 1.3.6.1.4.1.119.2.3.3.13.3.1
Indicates the table of Ether port information.
OBJECT-TYPE    
  SEQUENCE OF  
    MpEtherPortEntry

mpEtherPortEntry 1.3.6.1.4.1.119.2.3.3.13.3.1.1
Indicates the entry of each Ether port's information.
OBJECT-TYPE    
  MpEtherPortEntry  

mpEtherPortIfIndex 1.3.6.1.4.1.119.2.3.3.13.3.1.1.1
Indicates the interface number assigned to the Ether port uniquely in the equipment. Each Ethernet port identified by this object is the same Ethernet port identified by the same number of the ifIndex.
OBJECT-TYPE    
  INTEGER  

mpEtherPortLoopBackType 1.3.6.1.4.1.119.2.3.3.13.3.1.1.2
Indicates the type of the Loop-back test. If it is set to '2', the internal Loop-back test is executed. The Loop-back test is finished when one test packet has been sent. If it is set to '1', the Loop-back testing is not being executed, which means it is in the normal mode.
OBJECT-TYPE    
  INTEGER none(1), internal(2)  

mpEtherPortMode 1.3.6.1.4.1.119.2.3.3.13.3.1.1.3
Indicates the operation mode of the port. In case of Antomatical mode, the value '1' is set. In case of HDX10M, the value '2' is set. In case of FDX10M, the value '3' is set. In case of HDX100M, the value '4' is set. In case of FDX100M, the value '5' is set. In case of HDX1000M, the value '6' is set. -- @013 In case of FDX1000M, the value '7' is set. -- @013 The default value is '1'.
OBJECT-TYPE    
  INTEGER auto(1), hdx10(2), fdx10(3), hdx100(4), fdx100(5), hdx1000(6), fdx1000(7)  

mpEtherPortStatusTable 1.3.6.1.4.1.119.2.3.3.13.3.2
Indicates the table of Ether port status information.
OBJECT-TYPE    
  SEQUENCE OF  
    MpEtherPortStatusEntry

mpEtherPortStatusEntry 1.3.6.1.4.1.119.2.3.3.13.3.2.1
Indicates the entry of each Ether port's status information.
OBJECT-TYPE    
  MpEtherPortStatusEntry  

mpEtherPortStsIfIndex 1.3.6.1.4.1.119.2.3.3.13.3.2.1.1
Indicates the interface number assigned to the Ether port uniquely in the equipment. Each Ethernet port identified by this object is the same Ethernet port identified by the same number of the ifIndex.
OBJECT-TYPE    
  INTEGER  

mpEtherPortStsLoopBackResult 1.3.6.1.4.1.119.2.3.3.13.3.2.1.2
Indicates the result of the Loop-back test.
OBJECT-TYPE    
  INTEGER invalid(1), notAccepted(2), success(3), fail(4)  

mpEtherPortStsMode 1.3.6.1.4.1.119.2.3.3.13.3.2.1.3
Indicates operation mode of the port. If it set to '1', operation mode is automatic. If it set to '2', operation mode is manual.
OBJECT-TYPE    
  INTEGER auto(1), manual(2)  

mpEtherPortStsSpeed 1.3.6.1.4.1.119.2.3.3.13.3.2.1.4
Indicastes current speed of the port in bps.
OBJECT-TYPE    
  Gauge  

mpEtherPortStsFullDuplex 1.3.6.1.4.1.119.2.3.3.13.3.2.1.5
Indicates which current port status is full-duplex or half-duplex. If it is set to '1', it is half-duplex. If it is set to '2', it is full-duplex.
OBJECT-TYPE    
  INTEGER hdx(1), fdx(2)  

mpVlan 1.3.6.1.4.1.119.2.3.3.13.4
OBJECT IDENTIFIER    

mpVlanModeStatus 1.3.6.1.4.1.119.2.3.3.13.4.1
Indicates to validate the configuration of VLAN group. It is set to '1' when the configuration will be valid, after the value of objects had been modified.
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3)  

mpVlanTable 1.3.6.1.4.1.119.2.3.3.13.4.2
It is used for VLAN configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    MpVlanEntry

mpVlanEntry 1.3.6.1.4.1.119.2.3.3.13.4.2.1
Indicates the table entry of the VLAN configuration.
OBJECT-TYPE    
  MpVlanEntry  

mpVlanIndex 1.3.6.1.4.1.119.2.3.3.13.4.2.1.1
Indicates the specified number to identify the VLAN. The lowest number must be assigned to the default VLAN.
OBJECT-TYPE    
  INTEGER  

mpVlanRtrIndex 1.3.6.1.4.1.119.2.3.3.13.4.2.1.2
Indicates the interface number assigned to the VLAN uniquely, within the equipment. The VLAN identified by this object is the same VLAN identified by the same number of ifIndex. The lowest number must be assigned to the default VLAN.
OBJECT-TYPE    
  INTEGER  

mpVlanName 1.3.6.1.4.1.119.2.3.3.13.4.2.1.3
Indicates the name which is assigned to the VLAN for administrative purpose. I is used to assign or change the name of VLAN. In the initial state, only 'default' is registered as the default VLAN. The default VLAN name cannot be changed.
OBJECT-TYPE    
  DisplayString SIZE(0..40)  

mpVlanNameStatus 1.3.6.1.4.1.119.2.3.3.13.4.2.1.4
No description.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

mpVlanGroupTable 1.3.6.1.4.1.119.2.3.3.13.4.3
This is the table entry of the VLAN group name registration.
OBJECT-TYPE    
  SEQUENCE OF  
    MpVlanGroupEntry

mpVlanGroupEntry 1.3.6.1.4.1.119.2.3.3.13.4.3.1
This is the table entry of the VLAN group name registration.
OBJECT-TYPE    
  MpVlanGroupEntry  

mpVlanGrpIndex 1.3.6.1.4.1.119.2.3.3.13.4.3.1.1
This is the index to identify VLAN group. The value of this index and the index mpVlanIndex must be assigned uniquely,witrhin the range of 2 - 4095.
OBJECT-TYPE    
  INTEGER  

mpVlanGrpName 1.3.6.1.4.1.119.2.3.3.13.4.3.1.2
This object is the name defined to this VLAN Group, for management purpose.
OBJECT-TYPE    
  DisplayString SIZE(0..40)  

mpVlanGrpNameStatus 1.3.6.1.4.1.119.2.3.3.13.4.3.1.3
This object is used to create or delete the entry of mpVlanGroupTable. The value '1' is set to create the entry, and the value '2' is set to delete the entry.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

mpVlanBigpipeTable 1.3.6.1.4.1.119.2.3.3.13.4.4
This is the table type object of BigPipe name registration.
OBJECT-TYPE    
  SEQUENCE OF  
    MpVlanBigpipeEntry

mpVlanBigpipeEntry 1.3.6.1.4.1.119.2.3.3.13.4.4.1
This is the entry of the mpVlanBigPipeTable.
OBJECT-TYPE    
  MpVlanBigpipeEntry  

mpVlanBigpipeIndex 1.3.6.1.4.1.119.2.3.3.13.4.4.1.1
No description.
OBJECT-TYPE    
  INTEGER  

mpVlanBigpipeName 1.3.6.1.4.1.119.2.3.3.13.4.4.1.2
This is the index to identify the BigPipe. The value of this index should be within 1 - 6.
OBJECT-TYPE    
  DisplayString SIZE(0..40)  

mpVlanBigpipeNameStatus 1.3.6.1.4.1.119.2.3.3.13.4.4.1.3
This object is used to create or delete the entry of mpVlanBigPipeTable. The value '1' is set to create the entry, and the value '2' is set to delete the entry.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

mpVlanBigpipeMode 1.3.6.1.4.1.119.2.3.3.13.4.4.1.4
This object is used to specify the communication status of BigPipe to VLAN. If the value is set to '1', frames to/from all VLANs (except VLANs registered in mpVlanBigpipeVidControlTable) are passed. If the value is set to '2', frames to/from all VLANs (except VLANs registered in mpVlanBigpipeVidControlTable) are filtered. The default value is '1'.
OBJECT-TYPE    
  INTEGER open(1), clese(2)  

mpVlanIntfTable 1.3.6.1.4.1.119.2.3.3.13.4.5
This is the table type object of the interface (Ethernet port and logical ELAN port) subsucription to VLAN.
OBJECT-TYPE    
  SEQUENCE OF  
    MpVlanIntfEntry

mpVlanIntfEntry 1.3.6.1.4.1.119.2.3.3.13.4.5.1
This is the table entry of mpVlanIntfTable.
OBJECT-TYPE    
  MpVlanIntfEntry  

mpVlanIntfVlanIndex 1.3.6.1.4.1.119.2.3.3.13.4.5.1.1
This is the index to identify the existing VLAN to which the interfaces are subscribed. When the equipment is just shipped from factory, all the Ethernet ports are subscribed to the default VLAN.
OBJECT-TYPE    
  INTEGER  

mpVlanIntfNumber 1.3.6.1.4.1.119.2.3.3.13.4.5.1.2
This is the index to identify the Ethernet port number or logical ELAN port number subscribed to this VLAN. The value of this index is the same as ifIndex.
OBJECT-TYPE    
  INTEGER  

mpVlanIntfStatus 1.3.6.1.4.1.119.2.3.3.13.4.5.1.3
This object is used to register or delete the interface to this VLAN. The value '1' is set to register the interface to this VLAN, and the value '2' is set to delete the interface from this VLAN. When all the interfaces are deleted from this VLAN, the table entry of this VLAN is also deleted.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

mpVlanGroupIntfTable 1.3.6.1.4.1.119.2.3.3.13.4.6
This is the table type object of the VLAN subscription to VLAN Group.
OBJECT-TYPE    
  SEQUENCE OF  
    MpVlanGroupIntfEntry

mpVlanGroupIntfEntry 1.3.6.1.4.1.119.2.3.3.13.4.6.1
This is the table entry of mpVlanGroupIntfTable.
OBJECT-TYPE    
  MpVlanGroupIntfEntry  

mpVlanGrpIntfIndex 1.3.6.1.4.1.119.2.3.3.13.4.6.1.1
This is the index to identify the existing VLAN Group to which the VLANs are subscribed.
OBJECT-TYPE    
  INTEGER  

mpVlanGrpIntfVlanIndex 1.3.6.1.4.1.119.2.3.3.13.4.6.1.2
This is the index to identify the VLAN which is subscribed to this VLAN Group.
OBJECT-TYPE    
  INTEGER  

mpVlanGrpIntfStatus 1.3.6.1.4.1.119.2.3.3.13.4.6.1.3
This object is used to register/delete the VLAN to/from this VLAN Group. The value '1' is set to register this VLAN to this VLAN Group, and the value '2' is set to delete this VLAN from this VLAN Group.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

mpVlanBigpipeIntfTable 1.3.6.1.4.1.119.2.3.3.13.4.7
This is the table type object of the interface (Ethernet port) subscription to BigPipe.
OBJECT-TYPE    
  SEQUENCE OF  
    MpVlanBigpipeIntfEntry

mpVlanBigpipeIntfEntry 1.3.6.1.4.1.119.2.3.3.13.4.7.1
This is the table entry of mpVlanBigPipeIntfTable.
OBJECT-TYPE    
  MpVlanBigpipeIntfEntry  

mpVlanBigpipeIntfIndex 1.3.6.1.4.1.119.2.3.3.13.4.7.1.1
This is the index to identify the existing BigPipe.
OBJECT-TYPE    
  INTEGER  

mpVlanBigpipeIntfNumber 1.3.6.1.4.1.119.2.3.3.13.4.7.1.2
This is the index to identify the physical interface (Ethernet port) number subscribed to this BigPipe. The value of this index is the same as the value of ifIndex. The interface which is to be subscribed to BigPipe must not be subscribedany VLAN.
OBJECT-TYPE    
  INTEGER  

mpVlanBigpipeIntfNumberStatus 1.3.6.1.4.1.119.2.3.3.13.4.7.1.3
This object is used to register/delete the interface (Ethernet port) to/from this BigPipe. The value '1' is set to register this interface to this BigPipe, and the value '2' is set to delete this interface from this BigPipe.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

mpVlanMacTable 1.3.6.1.4.1.119.2.3.3.13.4.8
This is the table type object of MAC address data of the VLAN.
OBJECT-TYPE    
  SEQUENCE OF  
    MpVlanMacEntry

mpVlanMacEntry 1.3.6.1.4.1.119.2.3.3.13.4.8.1
This is the table entry of mpVlanMacTable.
OBJECT-TYPE    
  MpVlanMacEntry  

mpVlanMacVlanIndex 1.3.6.1.4.1.119.2.3.3.13.4.8.1.1
This is the index to identify the existing VLAN. The value of this object is the VLAN number.
OBJECT-TYPE    
  INTEGER  

mpVlanMacAddress 1.3.6.1.4.1.119.2.3.3.13.4.8.1.2
This object is the MAC address which is included in this VLAN.
OBJECT-TYPE    
  MacAddress  

mpVlanMacIntfNumber 1.3.6.1.4.1.119.2.3.3.13.4.8.1.3
This object is the Ethernet port number or logical ELAN number, from which the frame with source MAC address included in this VLAN can be received.This interface must belong to this VLAN. This object is set to '0' when no port is specified.
OBJECT-TYPE    
  INTEGER  

mpVlanMacStatus 1.3.6.1.4.1.119.2.3.3.13.4.8.1.4
This object is used to create or delete the entry of this table. The value '1' is set to create the entry, and the value '2' is set to deletethe entry.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

mpVlanBigpipeVidControlTable 1.3.6.1.4.1.119.2.3.3.13.4.9
This is the table type object of the filter condition concerning to VID for BigPipe.
OBJECT-TYPE    
  SEQUENCE OF  
    MpVlanBigpipeVidControlEntry

mpVlanBigpipeVidControlEntry 1.3.6.1.4.1.119.2.3.3.13.4.9.1
This is the table entry of mpVlanBigpipeVidControlTable.
OBJECT-TYPE    
  MpVlanBigpipeVidControlEntry  

mpVlanBigpipeVidControlIndex 1.3.6.1.4.1.119.2.3.3.13.4.9.1.1
This is the index to identify the BigPipe to which this filter condition is applied.
OBJECT-TYPE    
  INTEGER  

mpVlanBigpipeVidControlVid 1.3.6.1.4.1.119.2.3.3.13.4.9.1.2
This object is the VID of VLAN or VLAN Group, to which this filter condition is applied.
OBJECT-TYPE    
  INTEGER  

mpVlanBigpipeVidControlStatus 1.3.6.1.4.1.119.2.3.3.13.4.9.1.3
This object is used to register/delete the VID filter condition for BigPipe. The value '1' is set to register the filter condition, and the value '2' is set to delete the filter condition.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

mpVlanTpFdbTable 1.3.6.1.4.1.119.2.3.3.13.4.10
A table that contains information about forwarding database per VLAN.
OBJECT-TYPE    
  SEQUENCE OF  
    MpVlanTpFdbEntry

mpVlanTpFdbEntry 1.3.6.1.4.1.119.2.3.3.13.4.10.1
Each entry contains information about forwarding database per VLAN.
OBJECT-TYPE    
  MpVlanTpFdbEntry  

mpVlanTpFdbVlanIndex 1.3.6.1.4.1.119.2.3.3.13.4.10.1.1
Indicates the VLAN number to specify the forwarding database per VLAN.
OBJECT-TYPE    
  INTEGER  

mpVlanTpFdbMacAddress 1.3.6.1.4.1.119.2.3.3.13.4.10.1.2
Indicates the destination MAC Address which belongs to the forwarding information of this VLAN.
OBJECT-TYPE    
  MacAddress  

mpVlanTpFdbIntfNumber 1.3.6.1.4.1.119.2.3.3.13.4.10.1.3
Either the value '0', or the port number of the port from which the frame, which has a source address equal to the value of the 'mpVlanTPFdbMacAddress', was received. A value of '0' indicates that the port number has not been learned but that the bridge does have some forwarding information about this address.
OBJECT-TYPE    
  INTEGER  

mpVlanTpFdbStatus 1.3.6.1.4.1.119.2.3.3.13.4.10.1.4
The state of this entry. If it is '1', this entry is none of the following. If it is '2', this entry is not longer valie, but has not yet been flushed from the table. If it is '3', this entry was learned, and is being used. If it is '4', this entry is the bridge's MAC addresses. If it is '5', this entry is the MAC address which was registered as filtering condition.
OBJECT-TYPE    
  INTEGER other(1), invalid(2), learned(3), self(4), mgmt(5)  

mpVlanTagProtocolId 1.3.6.1.4.1.119.2.3.3.13.4.11
Indicates VLAN Tag Protocol ID used in this system. Range of VLAN Tag Protocol ID is from 1501(0x05dd) to 65535(0xffff) except 2048(0x0800), 2054(0x0806).
OBJECT-TYPE    
  INTEGER 1501..65535  

mpVlanTagPpTable 1.3.6.1.4.1.119.2.3.3.13.4.12
It is used for VLAN Tag PP(Point-to-Point) configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    MpVlanTagPpEntry

mpVlanTagPpEntry 1.3.6.1.4.1.119.2.3.3.13.4.12.1
Indicates the table entry of the VLAN Tag PP configuration.
OBJECT-TYPE    
  MpVlanTagPpEntry  

mpVlanTagPpIndex 1.3.6.1.4.1.119.2.3.3.13.4.12.1.1
Indicates the specified number to identify the VLAN Tag PP.
OBJECT-TYPE    
  INTEGER  

mpVlanTagPpRtrIndex 1.3.6.1.4.1.119.2.3.3.13.4.12.1.2
Indicates the interface number assigned to the VLAN Tag PP uniquely, within the equipment. The VLAN Tag PP identified by this object is the same VLAN Tag PP identified by the same number of ifIndex.
OBJECT-TYPE    
  INTEGER  

mpVlanTagPpIntfNumber 1.3.6.1.4.1.119.2.3.3.13.4.12.1.3
This is the index to identify the Ethernet port number or PPP port number subscribed to this VLAN Tag PP. The value of this index is the same as ifIndex.
OBJECT-TYPE    
  INTEGER  

mpVlanTagPpName 1.3.6.1.4.1.119.2.3.3.13.4.12.1.4
Indicates the name which is assigned to the VLAN Tag PP for administrative purpose. It is used to assign or change the name of VLAN Tag PP.
OBJECT-TYPE    
  DisplayString SIZE(0..40)  

mpVlanTagPpMacType 1.3.6.1.4.1.119.2.3.3.13.4.12.1.5
Indicates the MAC address type. If the value is set to '1', global MAC address of the physical port is used. If the value is set to '2', private MAC address given by user (first 4 octets) is used. In case of 2, the last two octets is given by the value of the mpVlanTagPpIndex.
OBJECT-TYPE    
  INTEGER global(1), private(2)  

mpVlanTagPpNameStatus 1.3.6.1.4.1.119.2.3.3.13.4.12.1.6
This object is used to register or delete the VLAN Tag PP.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

mpBridge 1.3.6.1.4.1.119.2.3.3.13.5
OBJECT IDENTIFIER    

mpBrgDestMacFilterTable 1.3.6.1.4.1.119.2.3.3.13.5.1
This is the table type object of the filter condition concerning to the destination MAC address.
OBJECT-TYPE    
  SEQUENCE OF  
    MpBrgDestMacFilterEntry

mpBrgDestMacFilterEntry 1.3.6.1.4.1.119.2.3.3.13.5.1.1
This is the table entry of mpBrgDestMacFilterTable.
OBJECT-TYPE    
  MpBrgDestMacFilterEntry  

mpBrgDestMacFilterVlanIndex 1.3.6.1.4.1.119.2.3.3.13.5.1.1.1
This is the index to identify the VLAN to which this filter condition is applied.
OBJECT-TYPE    
  INTEGER  

mpBrgDestMacFilterAddress 1.3.6.1.4.1.119.2.3.3.13.5.1.1.2
This object is the destination MAC address which is filtered in this VLAN.
OBJECT-TYPE    
  MacAddress  

mpBrgDestMacFilterStatus 1.3.6.1.4.1.119.2.3.3.13.5.1.1.3
This object is used to create or delete the table entry. The value '1' is set to create the entry, and the value '2' is set to delete the entry.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

mpBrgSrcMacFilterTable 1.3.6.1.4.1.119.2.3.3.13.5.2
This is the table type object of the filter condition concerning to the source MAC address.
OBJECT-TYPE    
  SEQUENCE OF  
    MpBrgSrcMacFilterEntry

mpBrgSrcMacFilterEntry 1.3.6.1.4.1.119.2.3.3.13.5.2.1
This is the table entry of mpBrgSrcMacFilterTable.
OBJECT-TYPE    
  MpBrgSrcMacFilterEntry  

mpBrgSrcMacFilterVlanIndex 1.3.6.1.4.1.119.2.3.3.13.5.2.1.1
This is the index to identify the VLAN to which this filter condition is applied.
OBJECT-TYPE    
  INTEGER  

mpBrgSrcMacFilterAddress 1.3.6.1.4.1.119.2.3.3.13.5.2.1.2
This object is the source MAC address which is filtered in this VLAN.
OBJECT-TYPE    
  MacAddress  

mpBrgSrcMacFilterStatus 1.3.6.1.4.1.119.2.3.3.13.5.2.1.3
This object is used to create or delete the table entry. The value '1' is set to create the entry, and the value '2' is set to delete the entry.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

mpBrgDestPortFilterTable 1.3.6.1.4.1.119.2.3.3.13.5.3
This is the table type ofject of the filter condition concerning to the destination port.
OBJECT-TYPE    
  SEQUENCE OF  
    MpBrgDestPortFilterEntry

mpBrgDestPortFilterEntry 1.3.6.1.4.1.119.2.3.3.13.5.3.1
This is the table entry of mpBrgDestPortFilterTable.
OBJECT-TYPE    
  MpBrgDestPortFilterEntry  

mpBrgDestPortFilterIfIndex 1.3.6.1.4.1.119.2.3.3.13.5.3.1.1
This is the index to identify the destination port to which the filtering function is applied. The value of this index is the same as IfIndex.
OBJECT-TYPE    
  INTEGER  

mpBrgDestPortFilterStatus 1.3.6.1.4.1.119.2.3.3.13.5.3.1.2
This object is used to create or delete the table entry. The value '1' is set to create the entry, and the value '2' is set to delete the entry.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

mpBrgSrcPortFilterTable 1.3.6.1.4.1.119.2.3.3.13.5.4
This is the table type ofject of the filter condition concerning to the source port.
OBJECT-TYPE    
  SEQUENCE OF  
    MpBrgSrcPortFilterEntry

mpBrgSrcPortFilterEntry 1.3.6.1.4.1.119.2.3.3.13.5.4.1
This is the table entry of mpBrgSrcPortFilterTable.
OBJECT-TYPE    
  MpBrgSrcPortFilterEntry  

mpBrgSrcPortFilterIfIndex 1.3.6.1.4.1.119.2.3.3.13.5.4.1.1
This is the index to identify the source port to which the filtering function is applied. The value of this index is the same as IfIndex.
OBJECT-TYPE    
  INTEGER  

mpBrgSrcPortFilterStatus 1.3.6.1.4.1.119.2.3.3.13.5.4.1.2
This object is used to create or delete the table entry. The value '1' is set to create the entry, and the value '2' is set to delete the entry.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

mpDbAccess 1.3.6.1.4.1.119.2.3.3.13.6
OBJECT IDENTIFIER    

mpDbAccessSave 1.3.6.1.4.1.119.2.3.3.13.6.1
Signal the system applications to save their config.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mpDbAccessAllSave 1.3.6.1.4.1.119.2.3.3.13.6.2
Signal the system applications to save their all config.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mpEventLog 1.3.6.1.4.1.119.2.3.3.13.7
OBJECT IDENTIFIER    

mpEventLogAttribute 1.3.6.1.4.1.119.2.3.3.13.7.1
Specifies the type of logging for the events.
OBJECT-TYPE    
  INTEGER wraparound(1), discardnewevents(2), newlog(3)  

mpEventLogSize 1.3.6.1.4.1.119.2.3.3.13.7.2
Specifies the log size.
OBJECT-TYPE    
  INTEGER  

mpEventLoggingFilter 1.3.6.1.4.1.119.2.3.3.13.7.3
Specifies filtering to be applied to incoming events. Bit mapped.
OBJECT-TYPE    
  INTEGER  

mpEventLogEarliestEvent 1.3.6.1.4.1.119.2.3.3.13.7.4
Specifies the index of the earliest event in the log.
OBJECT-TYPE    
  INTEGER  

mpEventLogLatestEvent 1.3.6.1.4.1.119.2.3.3.13.7.5
Specifies the index of the latest event in the log.
OBJECT-TYPE    
  INTEGER  

mpEventLogNumEntries 1.3.6.1.4.1.119.2.3.3.13.7.6
Specifies the number of entries in the log.
OBJECT-TYPE    
  INTEGER  

mpEventLogCriticalEvents 1.3.6.1.4.1.119.2.3.3.13.7.7
Number of critical events in the log.
OBJECT-TYPE    
  INTEGER  

mpEventLogMajorEvents 1.3.6.1.4.1.119.2.3.3.13.7.8
Number of major events in the log.
OBJECT-TYPE    
  INTEGER  

mpEventLogMinorEvents 1.3.6.1.4.1.119.2.3.3.13.7.9
Number of minor events in the log.
OBJECT-TYPE    
  INTEGER  

mpEventLogWarningEvents 1.3.6.1.4.1.119.2.3.3.13.7.10
Number of warning events in the log.
OBJECT-TYPE    
  INTEGER  

mpEventLogInformationalEvents 1.3.6.1.4.1.119.2.3.3.13.7.11
Number of informational events in the log.
OBJECT-TYPE    
  INTEGER  

mpEventLogClearAll 1.3.6.1.4.1.119.2.3.3.13.7.12
Clear the log if set to clear.
OBJECT-TYPE    
  INTEGER clear(1), noaction(2)  

mpEventLogClearSeverity 1.3.6.1.4.1.119.2.3.3.13.7.13
Deletes entries in the log with specified severity.
OBJECT-TYPE    
  INTEGER critical(1), major(2), minor(3), warning(4), informational(5), noaction(6)  

mpEventLogClearPeriod 1.3.6.1.4.1.119.2.3.3.13.7.14
Deletes entries in the log within the specified period. format : yyyy/[m]m/[d]d yyyy/m[m]/[d]d yyyy year mm month dd day
OBJECT-TYPE    
  DisplayString  

mpEventTable 1.3.6.1.4.1.119.2.3.3.13.7.15
Event related details.
OBJECT-TYPE    
  SEQUENCE OF  
    MpEventEntry

mpEventEntry 1.3.6.1.4.1.119.2.3.3.13.7.15.1
Details for particular event.
OBJECT-TYPE    
  MpEventEntry  

mpEventIndex 1.3.6.1.4.1.119.2.3.3.13.7.15.1.1
Index to the event in the table.
OBJECT-TYPE    
  INTEGER 1..4294967295  

mpEventSource 1.3.6.1.4.1.119.2.3.3.13.7.15.1.2
Indicates any code that may be associated with the source of the event. If no source is associated defaults to 0.
OBJECT-TYPE    
  INTEGER  

mpEventCode 1.3.6.1.4.1.119.2.3.3.13.7.15.1.3
Indicates any code that may be associated with the event for further details. If no code is associated defaults to 0.
OBJECT-TYPE    
  INTEGER  

mpEventTimeStamp 1.3.6.1.4.1.119.2.3.3.13.7.15.1.4
Timestamp of the event.
OBJECT-TYPE    
  DisplayString  

mpEventSeverity 1.3.6.1.4.1.119.2.3.3.13.7.15.1.5
Indicates event severity.
OBJECT-TYPE    
  INTEGER critical(1), major(2), minor(3), warning(4), informational(5)  

mpEventDescription 1.3.6.1.4.1.119.2.3.3.13.7.15.1.6
Brief description of the recorded event.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

mpTrapFilterTable 1.3.6.1.4.1.119.2.3.3.13.7.16
Indicates the table of Trap Filter Information.
OBJECT-TYPE    
  SEQUENCE OF  
    MpTrapFilterEntry

mpTrapFilterEntry 1.3.6.1.4.1.119.2.3.3.13.7.16.1
Indicates the entry of Trap Filter Information.
OBJECT-TYPE    
  MpTrapFilterEntry  

mpTrapFilterGeneric 1.3.6.1.4.1.119.2.3.3.13.7.16.1.1
This object is the generic-trap to identify the trap to which this filter condition is applied.
OBJECT-TYPE    
  INTEGER  

mpTrapFilterSpecific 1.3.6.1.4.1.119.2.3.3.13.7.16.1.2
This object is the specific-trap to identify the trap to which this filter condition is applied.
OBJECT-TYPE    
  INTEGER  

mpTrapFilterEnterprise 1.3.6.1.4.1.119.2.3.3.13.7.16.1.3
This object is the enterprise-trap to identify the trap to which this filter condition is applied.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

mpTrapFilterStatus 1.3.6.1.4.1.119.2.3.3.13.7.16.1.4
This object specifies validity of trap filter.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpTrapFilterName 1.3.6.1.4.1.119.2.3.3.13.7.16.1.5
This object is the name of the trap to be displayed.
OBJECT-TYPE    
  DisplayString  

mpEventTrapSeverityTable 1.3.6.1.4.1.119.2.3.3.13.7.17
Control Severity of Trap
OBJECT-TYPE    
  SEQUENCE OF  
    MpEventTrapSeverityEntry

mpEventTrapSeverityEntry 1.3.6.1.4.1.119.2.3.3.13.7.17.1
severity of SpecificTrap
OBJECT-TYPE    
  MpEventTrapSeverityEntry  

mpEventTrapSeverityIndex 1.3.6.1.4.1.119.2.3.3.13.7.17.1.1
Index of Trap Severity Table
OBJECT-TYPE    
  INTEGER 1..4294967295  

mpEventTrapCode 1.3.6.1.4.1.119.2.3.3.13.7.17.1.2
EventCode
OBJECT-TYPE    
  INTEGER  

mpEventTrapSeverity 1.3.6.1.4.1.119.2.3.3.13.7.17.1.3
Severity of Trap
OBJECT-TYPE    
  INTEGER critical(1), major(2), minor(3), warning(4), informational(5)  

mpEventTrapDescription 1.3.6.1.4.1.119.2.3.3.13.7.17.1.4
Information of Trap
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

mpEventLogAlmRenewalTimeStamp 1.3.6.1.4.1.119.2.3.3.13.7.18
SysUpTime of Alm State Change
OBJECT-TYPE    
  TimeTicks  

mpUiSession 1.3.6.1.4.1.119.2.3.3.13.8
OBJECT IDENTIFIER    

mpUiSessionTable 1.3.6.1.4.1.119.2.3.3.13.8.1
Table that describes active connections.
OBJECT-TYPE    
  SEQUENCE OF  
    MpUiSessionEntry

mpUiSessionEntry 1.3.6.1.4.1.119.2.3.3.13.8.1.1
Describes each node in the session table.
OBJECT-TYPE    
  MpUiSessionEntry  

mpUiSessionPort 1.3.6.1.4.1.119.2.3.3.13.8.1.1.1
The telnet port/async port that the session is using.
OBJECT-TYPE    
  INTEGER  

mpUiSessionTime 1.3.6.1.4.1.119.2.3.3.13.8.1.1.2
The starting time of the session
OBJECT-TYPE    
  DisplayString  

mpUiSessionUserStatus 1.3.6.1.4.1.119.2.3.3.13.8.1.1.3
Status of the session user.
OBJECT-TYPE    
  INTEGER unknown(1), operator(2), supervisor(3)  

mpUiSessionStatus 1.3.6.1.4.1.119.2.3.3.13.8.1.1.4
Session validity
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

mpFtp 1.3.6.1.4.1.119.2.3.3.13.9
OBJECT IDENTIFIER    

mpFtpServerStatus 1.3.6.1.4.1.119.2.3.3.13.9.1
This object controls the operating status of FTP server. The value '1' is set to enable the FTP server functionality, and the value '2' is set to disable the FTP server functionality.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpDhcp 1.3.6.1.4.1.119.2.3.3.13.10
OBJECT IDENTIFIER    

mpDhcpRelayRequests 1.3.6.1.4.1.119.2.3.3.13.10.1
This object is the counter of the total number of received Dhcp Relay request.
OBJECT-TYPE    
  Counter  

mpDhcpRelayReplys 1.3.6.1.4.1.119.2.3.3.13.10.2
This is the counter of the total number of received Dhcp Relay reply.
OBJECT-TYPE    
  Counter  

mpDhcpRelayRequestDiscards 1.3.6.1.4.1.119.2.3.3.13.10.3
This is the counter of the total number of discarded Dhcp Relay request.
OBJECT-TYPE    
  Counter  

mpDhcpRelayReplyDiscards 1.3.6.1.4.1.119.2.3.3.13.10.4
This is the counter of the total number of discareded Dhcp Relay reply.
OBJECT-TYPE    
  Counter  

mpDhcpRelayEnable 1.3.6.1.4.1.119.2.3.3.13.10.5
The current operational state of the Dhcp Relay Agent. This object is changed to '1' automatically, when mpDhcpRelayIfTable is created initially. Vice versa, this object is changed to '2' automatically, when mpDhcpRelayIfTable is deleted lastly. The default value of this object is '2'.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpDhcpRelayMaxHops 1.3.6.1.4.1.119.2.3.3.13.10.6
This object specifies the maximum number of the hop count of Dhcp Relay Agent. The value of this object must be within the range of 1 - 16. The default value of this object is 4.
OBJECT-TYPE    
  INTEGER 1..16  

mpDhcpRelayIfTable 1.3.6.1.4.1.119.2.3.3.13.10.8
This is the table type object of the Dhcp Relay Agent interface data.
OBJECT-TYPE    
  SEQUENCE OF  
    MpDhcpRelayIfEntry

mpDhcpRelayIfEntry 1.3.6.1.4.1.119.2.3.3.13.10.8.1
This object is the table entry of mpDhcpRelayIfTable.
OBJECT-TYPE    
  MpDhcpRelayIfEntry  

mpDhcpRelayIfEntIfIndex 1.3.6.1.4.1.119.2.3.3.13.10.8.1.1
This is the index to identify the router interface. The value of this index is the same as ifIndex.
OBJECT-TYPE    
  INTEGER  

mpDhcpRelayIfEntTransMode 1.3.6.1.4.1.119.2.3.3.13.10.8.1.2
The type of Transfer Mode. The default value of this object is '1'.
OBJECT-TYPE    
  INTEGER all1(1), all2(2), roundrobin(3)  

mpDhcpRelayIfEntRequests 1.3.6.1.4.1.119.2.3.3.13.10.8.1.3
This object is the counter of the total number of received BOOTP-REQUEST from this interface.
OBJECT-TYPE    
  Counter  

mpDhcpRelayIfEntReplies 1.3.6.1.4.1.119.2.3.3.13.10.8.1.4
This is the counter of the total number of attempt to transmit BOOTP-REPLY to this interface.
OBJECT-TYPE    
  Counter  

mpDhcpRelayIfEntRequestTransmits 1.3.6.1.4.1.119.2.3.3.13.10.8.1.5
This object is the counter of the total number of transmitted BOOTP-REQUEST.
OBJECT-TYPE    
  Counter  

mpDhcpRelayIfEntRequestDiscards 1.3.6.1.4.1.119.2.3.3.13.10.8.1.6
This is the counter of the total number of discarded BOOTP-REQUEST.
OBJECT-TYPE    
  Counter  

mpDhcpRelayIfEntReplyDiscards 1.3.6.1.4.1.119.2.3.3.13.10.8.1.7
This is the counter of the total number of discareded BOOTP-REPLY.
OBJECT-TYPE    
  Counter  

mpDhcpRelayIfEntStatus 1.3.6.1.4.1.119.2.3.3.13.10.8.1.8
This object is used to create or delete the table entry. The value '1' is set to create the entry, and the value '2' is set to delete the entry.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

mpDhcpRelayAddrTable 1.3.6.1.4.1.119.2.3.3.13.10.9
This is the table type object of the Dhcp Relay Agent Destination IP Address data.
OBJECT-TYPE    
  SEQUENCE OF  
    MpDhcpRelayAddrEntry

mpDhcpRelayAddrEntry 1.3.6.1.4.1.119.2.3.3.13.10.9.1
This object is the table entry of mpDhcpRelayAddrTable.
OBJECT-TYPE    
  MpDhcpRelayAddrEntry  

mpDhcpRelayAddrEntIfIndex 1.3.6.1.4.1.119.2.3.3.13.10.9.1.1
This is the index to identify the router interface. The value of this index is the same as ifIndex.
OBJECT-TYPE    
  INTEGER  

mpDhcpRelayAddrEntAddr 1.3.6.1.4.1.119.2.3.3.13.10.9.1.2
This object specifies the relaying destination IP address.
OBJECT-TYPE    
  IpAddress  

mpDhcpRelayAddrEntStatus 1.3.6.1.4.1.119.2.3.3.13.10.9.1.3
This object is used to create or delete the table entry. The value '1' is set to create the entry, and the value '2' is set to delete the entry.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

mpIp 1.3.6.1.4.1.119.2.3.3.13.11
OBJECT IDENTIFIER    

mpIpFilterExcludeTable 1.3.6.1.4.1.119.2.3.3.13.11.3
This is the table type object of IP address excluding filter condition. Table of Exclude IP Filter.
OBJECT-TYPE    
  SEQUENCE OF  
    MpIpFilterExcludeEntry

mpIpFilterExcludeEntry 1.3.6.1.4.1.119.2.3.3.13.11.3.1
This is the table entry of mpIpFilterExcludeTable. Exclude IP Filter fields.
OBJECT-TYPE    
  MpIpFilterExcludeEntry  

mpIpFilterExEntIndex 1.3.6.1.4.1.119.2.3.3.13.11.3.1.1
This is the index to identify the IP address excluding filter entry.
OBJECT-TYPE    
  INTEGER  

mpIpFilterExEntInIfIndex 1.3.6.1.4.1.119.2.3.3.13.11.3.1.2
This object specifies the input interface number to which the excluding filter is applied. The value of this object is the same as IfIndex of VLAN/LIS interface.
OBJECT-TYPE    
  INTEGER  

mpIpFilterExEntOutIfIndex 1.3.6.1.4.1.119.2.3.3.13.11.3.1.3
This object specifies the output interface number to which the excluding filter is applied. The value of this object is the same as IfIndex of VLAN/LIS interface.
OBJECT-TYPE    
  INTEGER  

mpIpFilterExEntSrcIpAddr 1.3.6.1.4.1.119.2.3.3.13.11.3.1.4
This object specifies the source IP address to which the excluding filter is applied.
OBJECT-TYPE    
  IpAddress  

mpIpFilterExEntSrcAddrMask 1.3.6.1.4.1.119.2.3.3.13.11.3.1.5
This object specifies the source IP address mask. '1' bit is set corresponding to the IP address part which is to be ignored.
OBJECT-TYPE    
  IpAddress  

mpIpFilterExEntDestIpAddr 1.3.6.1.4.1.119.2.3.3.13.11.3.1.6
This object specifies the destination IP address to which the excluding filter is applied.
OBJECT-TYPE    
  IpAddress  

mpIpFilterExEntDestAddrMask 1.3.6.1.4.1.119.2.3.3.13.11.3.1.7
This object specifies the destination IP address mask. '1' bit is set corresponding to the IP address part which is to be ignored.
OBJECT-TYPE    
  IpAddress  

mpIpFilterExEntIpOptions 1.3.6.1.4.1.119.2.3.3.13.11.3.1.8
This object specifies the IP option to which the excluding filter is applied. In case all the option is specified, the value '255' is set to this object. In case no option is specified, the value '0' is set to this object.
OBJECT-TYPE    
  INTEGER  

mpIpFilterExEntIpProcNumber 1.3.6.1.4.1.119.2.3.3.13.11.3.1.9
This obeject specifies the protocol to which the excluding filter is applied. In case of ICMP, the value '1' is set to this object. In case of TCP, the value '6' is set to this object. In case of UDP, the value '17' is set to this object.
OBJECT-TYPE    
  INTEGER  

mpIpFilterExEntSrcPort 1.3.6.1.4.1.119.2.3.3.13.11.3.1.10
This object specifies the receiving TCP/UDP port number to which the excluding filter is applied.
OBJECT-TYPE    
  INTEGER  

mpIpFilterExEntDestPort 1.3.6.1.4.1.119.2.3.3.13.11.3.1.11
This object specifies the sending TCP/UDP port number to which the excluding filter is applied.
OBJECT-TYPE    
  INTEGER  

mpIpFilterExEntTcpAckOffSegment 1.3.6.1.4.1.119.2.3.3.13.11.3.1.12
This object specifies the pakcket handling method corresponding to the ACK bit of TCP header. In case of discarding packet when ACK is off, the value '1' is set to this object. In case of not discarding packet when ACK is off, the value '2' is set to this object.
OBJECT-TYPE    
  INTEGER deny(1), permit(2)  

mpIpFilterExEntIcmpSend 1.3.6.1.4.1.119.2.3.3.13.11.3.1.13
This object specifies the ICMP(error) sending method when a packet is discarded by IP filtering function. In case of sending ICMP error packet, the value '1' is set to this object. In case of not sending ICMP error packet, the value '2' is set to this object.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpIpFilterExEntEventLogging 1.3.6.1.4.1.119.2.3.3.13.11.3.1.14
This object specifies the event handling method when a packet is discarded by IP filtering function. In case of reporting it by event, the value '1' is set to this object. In case of not reporting it by event, the value '2' is set to this object.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpIpFilterExEntStatus 1.3.6.1.4.1.119.2.3.3.13.11.3.1.15
This object is used to create, delete, or modify this table entry.
OBJECT-TYPE    
  RowStatus  

mpIpFilterIncludeTable 1.3.6.1.4.1.119.2.3.3.13.11.4
This is the table type object of IP pass-filter condition data.
OBJECT-TYPE    
  SEQUENCE OF  
    MpIpFilterIncludeEntry

mpIpFilterIncludeEntry 1.3.6.1.4.1.119.2.3.3.13.11.4.1
This is the table entry of mpIpFilterIncludeTable.
OBJECT-TYPE    
  MpIpFilterIncludeEntry  

mpIpFilterInEntIndex 1.3.6.1.4.1.119.2.3.3.13.11.4.1.1
This is the index to identify the IP pass-filter condition table entry.
OBJECT-TYPE    
  INTEGER  

mpIpFilterInEntInIfIndex 1.3.6.1.4.1.119.2.3.3.13.11.4.1.2
This object specifies the input interface to which the IP pass-filter is applied. The value of this index is the same as IfIndex of VLAN/LIS interface.
OBJECT-TYPE    
  INTEGER  

mpIpFilterInEntOutIfIndex 1.3.6.1.4.1.119.2.3.3.13.11.4.1.3
This object specifies the output interface to which the IP pass-filter is applied. The value of this index is the same as IfIndex of VLAN/LIS interface.
OBJECT-TYPE    
  INTEGER  

mpIpFilterInEntSrcIpAddr 1.3.6.1.4.1.119.2.3.3.13.11.4.1.4
This object specifies the source IP address to which the IP pass-filter is applied.
OBJECT-TYPE    
  IpAddress  

mpIpFilterInEntSrcAddrMask 1.3.6.1.4.1.119.2.3.3.13.11.4.1.5
This object specified the source IP address mask. '1' bit is set corresponding to the IP address part which is to be ignored.
OBJECT-TYPE    
  IpAddress  

mpIpFilterInEntDestIpAddr 1.3.6.1.4.1.119.2.3.3.13.11.4.1.6
This object specifies the destination IP address to which the IP pass-filter is applied.
OBJECT-TYPE    
  IpAddress  

mpIpFilterInEntDestAddrMask 1.3.6.1.4.1.119.2.3.3.13.11.4.1.7
This object specified the destination IP address mask. '1' bit is set corresponding to the IP address part which is to be ignored.
OBJECT-TYPE    
  IpAddress  

mpIpFilterInEntIpOptions 1.3.6.1.4.1.119.2.3.3.13.11.4.1.8
This object specifies the IP option to which the IP pass-filter is applied. In case all the option is specified, the value '255' is set to this object. In case no option is specified, the value '0' is set to this object.
OBJECT-TYPE    
  INTEGER  

mpIpFilterInEntIpProcNumber 1.3.6.1.4.1.119.2.3.3.13.11.4.1.9
This obeject specifies the protocol to which the IP pass-filter is applied. In case of ICMP, the value '1' is set to this object. In case of TCP, the value '6' is set to this object. In case of UDP, the value '17' is set to this object.
OBJECT-TYPE    
  INTEGER  

mpIpFilterInEntSrcPort 1.3.6.1.4.1.119.2.3.3.13.11.4.1.10
This object specifies the receiving TCP/UDP port number to which the IP pass-filter is applied.
OBJECT-TYPE    
  INTEGER  

mpIpFilterInEntDestPort 1.3.6.1.4.1.119.2.3.3.13.11.4.1.11
This object specifies the sending TCP/UDP port number to which the IP pass-filter is applied.
OBJECT-TYPE    
  INTEGER  

mpIpFilterInEntTcpAckOffSegment 1.3.6.1.4.1.119.2.3.3.13.11.4.1.12
This object specifies the pakcket handling method corresponding to the ACK bit of TCP header. In case of discarding packet when ACK is off, the value '1' is set to this object. In case of not discarding packet when ACK is off, the value '2' is set to this object.
OBJECT-TYPE    
  INTEGER deny(1), permit(2)  

mpIpFilterInEntLifeTime 1.3.6.1.4.1.119.2.3.3.13.11.4.1.13
This object specifies the valid time period of this IP pass-filter condition. When the valid time period expired, this entry is deleted automatically. In case of setting the value '0' to this object, this IP pass-filter condition lasts until it is deleted by operator command.
OBJECT-TYPE    
  INTEGER  

mpIpFilterInEntStatus 1.3.6.1.4.1.119.2.3.3.13.11.4.1.14
This object is used to create, delete, or modify this table entry.
OBJECT-TYPE    
  RowStatus  

mpIpInFilterDiscards 1.3.6.1.4.1.119.2.3.3.13.11.5
This object is the counter of total number of the receiving packets discarded by this IP filter.
OBJECT-TYPE    
  Counter  

mpIpOutFilterDiscards 1.3.6.1.4.1.119.2.3.3.13.11.6
This object is the counter of total number of the receiving packets discarded by this IP filter.
OBJECT-TYPE    
  Counter  

mpIpStaticRouteTable 1.3.6.1.4.1.119.2.3.3.13.11.7
The table of static route.
OBJECT-TYPE    
  SEQUENCE OF  
    MpIpStaticRouteEntry

mpIpStaticRouteEntry 1.3.6.1.4.1.119.2.3.3.13.11.7.1
A entry of static route.
OBJECT-TYPE    
  MpIpStaticRouteEntry  

mpIpStaticRouteDest 1.3.6.1.4.1.119.2.3.3.13.11.7.1.1
This object specifies destination IP Address of static route.
OBJECT-TYPE    
  IpAddress  

mpIpStaticRouteMask 1.3.6.1.4.1.119.2.3.3.13.11.7.1.2
This object specifies network mask of static route.
OBJECT-TYPE    
  IpAddress  

mpIpStaticRouteNextHop 1.3.6.1.4.1.119.2.3.3.13.11.7.1.3
This object specifies next-hop IP Address of static route. The value 0 is specified when route type is 'other','reject' or' local'.
OBJECT-TYPE    
  IpAddress  

mpIpStaticRouteIfIndex 1.3.6.1.4.1.119.2.3.3.13.11.7.1.4
This object specifies the outgoing ifIndex.
OBJECT-TYPE    
  INTEGER  

mpIpStaticRouteType 1.3.6.1.4.1.119.2.3.3.13.11.7.1.5
This object specifies the route type. The route type other(1) is not reflected to IP routing table. The route type reject(2) is used to discard corresponding IP packet.
OBJECT-TYPE    
  INTEGER other(1), reject(2), local(3), remote(4)  

mpIpStaticRoutePriority 1.3.6.1.4.1.119.2.3.3.13.11.7.1.6
This object specifies route priority. The entry which route priority is the smallest in usable next-hop is reflected to IP routing table when route priority is different in every next-hop at the case of multi-path.
OBJECT-TYPE    
  INTEGER 1..255  

mpIpStaticRouteTag 1.3.6.1.4.1.119.2.3.3.13.11.7.1.7
This object specifies route tag. In case route type is 'reject', setting to this object is prohibited.
OBJECT-TYPE    
  INTEGER  

mpIpStaticRouteStatus 1.3.6.1.4.1.119.2.3.3.13.11.7.1.8
This object specifies status of this entry. When entry is deleted, invalid(2) is set.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

mpIpRoutePriorityTable 1.3.6.1.4.1.119.2.3.3.13.11.8
The route priority table of the routing protocol unit. The value of this table is the default value of each routing protocol of this system. It is used for tie-break when the requirement of the addition of routing table for the same network from plural routing protocols occur and route priority is the same.
OBJECT-TYPE    
  SEQUENCE OF  
    MpIpRoutePriorityEntry

mpIpRoutePriorityEntry 1.3.6.1.4.1.119.2.3.3.13.11.8.1
A route priority entry of the routing protocol.
OBJECT-TYPE    
  MpIpRoutePriorityEntry  

mpIpRoutePriorityProtocol 1.3.6.1.4.1.119.2.3.3.13.11.8.1.1
This object specifies the protocol of IP routing table.
OBJECT-TYPE    
  INTEGER other(1), local(2), static(3), ospfIntraArea(4), ospfInterArea(5), ospfExternal(6), rip(7)  

mpIpRoutePriorityValue 1.3.6.1.4.1.119.2.3.3.13.11.8.1.2
This object specifies route priority value.
OBJECT-TYPE    
  INTEGER 0..255  

mpIpImportListTable 1.3.6.1.4.1.119.2.3.3.13.11.9
The table which is used to distribute route information to different routing protocol. It defines condition of routing table to be distributed and value to be used at distributing.
OBJECT-TYPE    
  SEQUENCE OF  
    MpIpImportListEntry

mpIpImportListEntry 1.3.6.1.4.1.119.2.3.3.13.11.9.1
The entry which is used to distribute route information to different routing protocol.
OBJECT-TYPE    
  MpIpImportListEntry  

mpIpImportListNumber 1.3.6.1.4.1.119.2.3.3.13.11.9.1.1
This object specifies import-list number.
OBJECT-TYPE    
  INTEGER  

mpIpImportListAction 1.3.6.1.4.1.119.2.3.3.13.11.9.1.2
This object specifies whether routing table corresponding to the condition is distributed or ignored.
OBJECT-TYPE    
  INTEGER import(1), deny(2)  

mpIpImportListConIfIndex 1.3.6.1.4.1.119.2.3.3.13.11.9.1.3
This object specifies a condition by the outgoing interface. The value 0 means it is outside of the condition decision.
OBJECT-TYPE    
  INTEGER  

mpIpImportListConNetAddr 1.3.6.1.4.1.119.2.3.3.13.11.9.1.4
This object specifies the network address. It is shared with the network condition and the range condition.
OBJECT-TYPE    
  IpAddress  

mpIpImportListConNetMask 1.3.6.1.4.1.119.2.3.3.13.11.9.1.5
This object specifies the network mask. It is shared with the network condition and the range condition.
OBJECT-TYPE    
  IpAddress  

mpIpImportListConNetStatus 1.3.6.1.4.1.119.2.3.3.13.11.9.1.6
This object specifies the status of condition about network address.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

mpIpImportListConRangeStatus 1.3.6.1.4.1.119.2.3.3.13.11.9.1.7
This object specifies the status of condition about network address range.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

mpIpImportListConNextHop 1.3.6.1.4.1.119.2.3.3.13.11.9.1.8
This object specifies the condition about next-hop. The value 0 means it is outside of the condition decision.
OBJECT-TYPE    
  IpAddress  

mpIpImportListConSource 1.3.6.1.4.1.119.2.3.3.13.11.9.1.9
This object specifies IP address or router ID of advertising router.
OBJECT-TYPE    
  IpAddress  

mpIpImportListConSourceStatus 1.3.6.1.4.1.119.2.3.3.13.11.9.1.10
This object specifies the status of condition about advertising router.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

mpIpImportListConMetric 1.3.6.1.4.1.119.2.3.3.13.11.9.1.11
This object specifies the condition about metric. The value 0 means it is outside of the condition decision.
OBJECT-TYPE    
  INTEGER  

mpIpImportListConRouteType 1.3.6.1.4.1.119.2.3.3.13.11.9.1.12
This object specifies the condition about route type. The value 0 means it is outside of the condition decision.
OBJECT-TYPE    
  INTEGER other(1), internal(2), intraArea(3), interArea(4), external(5), type1External(6), type2External(7)  

mpIpImportListConTag 1.3.6.1.4.1.119.2.3.3.13.11.9.1.13
This object specifies route tag.
OBJECT-TYPE    
  INTEGER  

mpIpImportListConTagStatus 1.3.6.1.4.1.119.2.3.3.13.11.9.1.14
This object specifies the status of condition about route tag.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

mpIpImportListConPId 1.3.6.1.4.1.119.2.3.3.13.11.9.1.15
This object specifies the condition about protocol ID. The value 0 means it is outside of the condition decision.
OBJECT-TYPE    
  INTEGER 0..255  

mpIpImportListSetNetAddr 1.3.6.1.4.1.119.2.3.3.13.11.9.1.16
This object specifies the network address which is applied when routing table corresponding to the condition is distributed.
OBJECT-TYPE    
  IpAddress  

mpIpImportListSetNetMask 1.3.6.1.4.1.119.2.3.3.13.11.9.1.17
This object specifies the mask address which is applied when routing table corresponding to the condition is distributed.
OBJECT-TYPE    
  IpAddress  

mpIpImportListSetNetStatus 1.3.6.1.4.1.119.2.3.3.13.11.9.1.18
This object specifies the status of network address which is applied when routing table corresponding to the condition is distributed.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

mpIpImportListSetMetric 1.3.6.1.4.1.119.2.3.3.13.11.9.1.19
This object specifies the metric value which is applied when routing table corresponding to the condition is distributed.
OBJECT-TYPE    
  INTEGER  

mpIpImportListSetNextHop 1.3.6.1.4.1.119.2.3.3.13.11.9.1.20
This object specifies the next-hop IP address which is applied when routing table corresponding to the condition is distributed.
OBJECT-TYPE    
  IpAddress  

mpIpImportListSetTag 1.3.6.1.4.1.119.2.3.3.13.11.9.1.21
This object specifies the route tag which is applied when routing table corresponding to the condition is distributed.
OBJECT-TYPE    
  INTEGER  

mpIpImportListSetRouteType 1.3.6.1.4.1.119.2.3.3.13.11.9.1.22
This object specifies the external route type which is applied when routing table corresponding to the condition is distributed to OSPF.
OBJECT-TYPE    
  INTEGER type1External(1), type2External(2)  

mpIpImportListTableStatus 1.3.6.1.4.1.119.2.3.3.13.11.9.1.23
This object specifies status of this entry. When entry is deleted, invalid(2) is set.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

mpIpVpnTable 1.3.6.1.4.1.119.2.3.3.13.11.10
The table of addressing information relevant to this entity's ifIndex.
OBJECT-TYPE    
  SEQUENCE OF  
    MpIpVpnEntry

mpIpVpnEntry 1.3.6.1.4.1.119.2.3.3.13.11.10.1
The addressing information for one of this entity's ifIndex.
OBJECT-TYPE    
  MpIpVpnEntry  

mpIpVpnIfIndex 1.3.6.1.4.1.119.2.3.3.13.11.10.1.1
The index value which uniquely identifies the interface to which this entry is applicable. The interface referred by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  INTEGER  

mpIpVpnId 1.3.6.1.4.1.119.2.3.3.13.11.10.1.2
This is the index to identify VPN the entry. The value of this index must be assigned uniquely, witrhin the range of 1 - 65535.
OBJECT-TYPE    
  INTEGER  

mpIpVpnIpGroupTable 1.3.6.1.4.1.119.2.3.3.13.11.11
The table of IP group information relevant to this entity's VPNID.
OBJECT-TYPE    
  SEQUENCE OF  
    MpIpVpnIpGroupEntry

mpIpVpnIpGroupEntry 1.3.6.1.4.1.119.2.3.3.13.11.11.1
The IP group information for one of this entity's VPNID.
OBJECT-TYPE    
  MpIpVpnIpGroupEntry  

mpIpVpnIpGroupVpnId 1.3.6.1.4.1.119.2.3.3.13.11.11.1.1
This is the index to identify the VPN entry. The value of this index must be assigned uniquely, witrhin the range of 1 - 65535.
OBJECT-TYPE    
  INTEGER  

mpIpVpnIpForwarding 1.3.6.1.4.1.119.2.3.3.13.11.11.1.2
The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP gateways forward datagrams. IP hosts do not (except those source-routed via the host). Note that for some managed nodes, this object may take on only a subset of the values possible. Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to change this object to an inappropriate value.
OBJECT-TYPE    
  INTEGER forwarding(1), not-forwarding(2)  

mpIpVpnIpDefaultTTL 1.3.6.1.4.1.119.2.3.3.13.11.11.1.3
The default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the transport layer protocol.
OBJECT-TYPE    
  INTEGER  

mpIpVpnIpInReceives 1.3.6.1.4.1.119.2.3.3.13.11.11.1.4
The total number of input datagrams received from interfaces, including those received in error.
OBJECT-TYPE    
  Counter  

mpIpVpnIpInHdrErrors 1.3.6.1.4.1.119.2.3.3.13.11.11.1.5
The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc.
OBJECT-TYPE    
  Counter  

mpIpVpnIpInAddrErrors 1.3.6.1.4.1.119.2.3.3.13.11.11.1.6
The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., 0.0.0.0) and addresses of unsupported Classes (e.g., Class E). For entities which are not IP Gateways and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address.
OBJECT-TYPE    
  Counter  

mpIpVpnIpForwDatagrams 1.3.6.1.4.1.119.2.3.3.13.11.11.1.7
The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IP Gateways, this counter will include only those packets which were Source-Routed via this entity, and the Source- Route option processing was successful.
OBJECT-TYPE    
  Counter  

mpIpVpnIpInUnknownProtos 1.3.6.1.4.1.119.2.3.3.13.11.11.1.8
The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol.
OBJECT-TYPE    
  Counter  

mpIpVpnIpInDiscards 1.3.6.1.4.1.119.2.3.3.13.11.11.1.9
The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly.
OBJECT-TYPE    
  Counter  

mpIpVpnIpInDelivers 1.3.6.1.4.1.119.2.3.3.13.11.11.1.10
The total number of input datagrams successfully delivered to IP user-protocols (including ICMP).
OBJECT-TYPE    
  Counter  

mpIpVpnIpOutRequests 1.3.6.1.4.1.119.2.3.3.13.11.11.1.11
The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipForwDatagrams.
OBJECT-TYPE    
  Counter  

mpIpVpnIpOutDiscards 1.3.6.1.4.1.119.2.3.3.13.11.11.1.12
The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipForwDatagrams if any such packets met this (discretionary) discard criterion.
OBJECT-TYPE    
  Counter  

mpIpVpnIpOutNoRoutes 1.3.6.1.4.1.119.2.3.3.13.11.11.1.13
The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted in ipForwDatagrams which meet this `no-route' criterion. Note that this includes any datagarms which a host cannot route because all of its default gateways are down.
OBJECT-TYPE    
  Counter  

mpIpVpnIpReasmTimeout 1.3.6.1.4.1.119.2.3.3.13.11.11.1.14
The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity.
OBJECT-TYPE    
  INTEGER  

mpIpVpnIpReasmReqds 1.3.6.1.4.1.119.2.3.3.13.11.11.1.15
The number of IP fragments received which needed to be reassembled at this entity.
OBJECT-TYPE    
  Counter  

mpIpVpnIpReasmOKs 1.3.6.1.4.1.119.2.3.3.13.11.11.1.16
The number of IP datagrams successfully re- assembled.
OBJECT-TYPE    
  Counter  

mpIpVpnIpReasmFails 1.3.6.1.4.1.119.2.3.3.13.11.11.1.17
The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received.
OBJECT-TYPE    
  Counter  

mpIpVpnIpFragOKs 1.3.6.1.4.1.119.2.3.3.13.11.11.1.18
The number of IP datagrams that have been successfully fragmented at this entity.
OBJECT-TYPE    
  Counter  

mpIpVpnIpFragFails 1.3.6.1.4.1.119.2.3.3.13.11.11.1.19
The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment flag was set.
OBJECT-TYPE    
  Counter  

mpIpVpnIpFragCreates 1.3.6.1.4.1.119.2.3.3.13.11.11.1.20
The number of IP datagram fragments that have been generated as a result of fragmentation at this entity.
OBJECT-TYPE    
  Counter  

mpIpVpnIpRoutingDiscards 1.3.6.1.4.1.119.2.3.3.13.11.11.1.21
The number of routing entries which were chosen to be discarded even though they are valid. One possible reason for discarding such an entry could be to free-up buffer space for other routing.
OBJECT-TYPE    
  Counter  

mpIpVpnIpInFilterDiscards 1.3.6.1.4.1.119.2.3.3.13.11.11.1.22
This object is the counter of total number of the receiving packets discarded by this IP filter.
OBJECT-TYPE    
  Counter  

mpIpVpnIpOutFilterDiscards 1.3.6.1.4.1.119.2.3.3.13.11.11.1.23
This object is the counter of total number of the receiving packets discarded by this IP filter.
OBJECT-TYPE    
  Counter  

mpIpVpnIpGroupStatus 1.3.6.1.4.1.119.2.3.3.13.11.11.1.24
When an entry is created it autmatically becomes valid(1). When this object is set to invalid(2) then this entry will be deleted.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

mpIpVpnIpAddrTable 1.3.6.1.4.1.119.2.3.3.13.11.12
The table of addressing information relevant to this entity's VPNID & IP addresses.
OBJECT-TYPE    
  SEQUENCE OF  
    MpIpVpnIpAddrEntry

mpIpVpnIpAddrEntry 1.3.6.1.4.1.119.2.3.3.13.11.12.1
The addressing information for one of this entity's VPNID & IP addresses.
OBJECT-TYPE    
  MpIpVpnIpAddrEntry  

mpIpVpnIpAdEntVpnId 1.3.6.1.4.1.119.2.3.3.13.11.12.1.1
This is the index to identify the VPN entry. The value of this index must be assigned uniquely, witrhin the range of 1 - 65535.
OBJECT-TYPE    
  INTEGER  

mpIpVpnIpAdEntIfIndex 1.3.6.1.4.1.119.2.3.3.13.11.12.1.2
The index value which uniquely identifies the interface to which this entry is applicable. The interface referred by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  INTEGER  

mpIpVpnIpAdEntAddr 1.3.6.1.4.1.119.2.3.3.13.11.12.1.3
The IP address to which this entry's addressing information pertains. This IP address must always be a unicast IP address and it should never be a Class D or E IP address.
OBJECT-TYPE    
  IpAddress  

mpIpVpnIpAdEntNetMask 1.3.6.1.4.1.119.2.3.3.13.11.12.1.4
The subnet mask associated with the IP address of this entry. The value of this object is an IP address with the network part bits set to all 1's and all the hosts part bits set to all 0's.
OBJECT-TYPE    
  IpAddress  

mpIpVpnIpAdEntBcastAddr 1.3.6.1.4.1.119.2.3.3.13.11.12.1.5
The value of this object is the broadcast IP address for this entry. The broadcast IP address is the the IP address with the host part bits set to all 1's or all 0's.
OBJECT-TYPE    
  INTEGER  

mpIpVpnIpAdEntReasmMaxSize 1.3.6.1.4.1.119.2.3.3.13.11.12.1.6
The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.
OBJECT-TYPE    
  INTEGER 0..65535  

mpIpVpnIpAdEntStatus 1.3.6.1.4.1.119.2.3.3.13.11.12.1.7
When an entry is created it autmatically becomes valid(1). When this object is set to invalid(2) then this entry will be deleted.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

mpIpVpnIpAdEntEncapType 1.3.6.1.4.1.119.2.3.3.13.11.12.1.8
This object refers to the encapsulation type for the interface of this entry. For VLAN interfaces the encapsulation type can only be set to dix(2) or snap(3). For LIS interfaces the encapsulation type can only be set to none(1).
OBJECT-TYPE    
  INTEGER none(1), dix(2), snap(3)  

mpIpVpnIpAdEntForwarding 1.3.6.1.4.1.119.2.3.3.13.11.12.1.9
This object indicates operation for data gram. to forwarding(1). When this interface is IP host, this object is set to not-forwarding(2).
OBJECT-TYPE    
  INTEGER forwarding(1), not-forwarding(2)  

mpIpVpnIpAdEntArpTimeOut 1.3.6.1.4.1.119.2.3.3.13.11.12.1.10
Effective time of the Dynamic VPN IP ARP table (mpIpVpnIpNetToMediaTable). The value 0 means infinity.
OBJECT-TYPE    
  INTEGER 0..2147483647  

mpIpVpnIpAdEntIcmpRedirectStatus 1.3.6.1.4.1.119.2.3.3.13.11.12.1.11
This object indicates whether an ICMP redirect message is transmitted to this Interface.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpIpVpnIpAdEntIcmpUnreachNetInStatus 1.3.6.1.4.1.119.2.3.3.13.11.12.1.12
This object indicates whether an ICMP destination unreachable(network unreachable in) message is transmitted to this Interface.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpIpVpnIpAdEntIcmpUnreachNetOutStatus 1.3.6.1.4.1.119.2.3.3.13.11.12.1.13
This object indicates whether an ICMP destination unreachable(network unreachable out) message is transmitted to this Interface.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpIpVpnIpAdEntIcmpUnreachHostInStatus 1.3.6.1.4.1.119.2.3.3.13.11.12.1.14
This object indicates whether an ICMP destination unreachable(host unreachable in) message is transmitted to this Interface.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpIpVpnIpAdEntIcmpUnreachHostOutStatus 1.3.6.1.4.1.119.2.3.3.13.11.12.1.15
This object indicates whether an ICMP destination unreachable(host unreachable out) message is transmitted to this Interface.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpIpVpnIpAdEntIcmpUnreachProtInStatus 1.3.6.1.4.1.119.2.3.3.13.11.12.1.16
This object indicates whether an ICMP destination unreachable(protocol unreachable in) message is transmitted to this Interface.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpIpVpnIpAdEntIcmpUnreachProtOutStatus 1.3.6.1.4.1.119.2.3.3.13.11.12.1.17
This object indicates whether an ICMP destination unreachable(protocol unreachable out) message is transmitted to this Interface.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpIpVpnIpAdEntIcmpUnreachPortInStatus 1.3.6.1.4.1.119.2.3.3.13.11.12.1.18
This object indicates whether an ICMP destination unreachable(port unreachable in) message is transmitted to this Interface.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpIpVpnIpAdEntIcmpUnreachPortOutStatus 1.3.6.1.4.1.119.2.3.3.13.11.12.1.19
This object indicates whether an ICMP destination unreachable(port unreachable out) message is transmitted to this Interface.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpIpVpnIpAdEntIcmpUnreachFragNeededInStatus 1.3.6.1.4.1.119.2.3.3.13.11.12.1.20
This object indicates whether an ICMP destination unreachable(fragmentation needed and DF set in) message is transmitted to this Interface.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpIpVpnIpAdEntIcmpUnreachFragNeededOutStatus 1.3.6.1.4.1.119.2.3.3.13.11.12.1.21
This object indicates whether an ICMP destination unreachable(fragmentation needed and DF set out) message is transmitted to this Interface.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpIpVpnIpAdEntIcmpUnreachRouteFailInStatus 1.3.6.1.4.1.119.2.3.3.13.11.12.1.22
This object indicates whether an ICMP destination unreachable(source route failed in)message is transmitted to this Interface.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpIpVpnIpAdEntIcmpUnreachRouteFailOutStatus 1.3.6.1.4.1.119.2.3.3.13.11.12.1.23
This object indicates whether an ICMP destination unreachable(source route failed out)message is transmitted to this Interface.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpIpVpnIpAdEntIcmpTtlExceedInStatus 1.3.6.1.4.1.119.2.3.3.13.11.12.1.24
This object indicates whether an ICMP time exceeded(time to live exceeded in transit in) message is transmitted to this Interface.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpIpVpnIpAdEntIcmpTtlExceedOutStatus 1.3.6.1.4.1.119.2.3.3.13.11.12.1.25
This object indicates whether an ICMP time exceeded(time to live exceeded in transit out) message is transmitted to this Interface.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpIpVpnIpAdEntIcmpReassemblyExceedInStatus 1.3.6.1.4.1.119.2.3.3.13.11.12.1.26
This object indicates whether an ICMP time exceeded(fragment reassembly time exceeded in) message is transmitted to this Interface.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpIpVpnIpAdEntIcmpReassemblyExceedOutStatus 1.3.6.1.4.1.119.2.3.3.13.11.12.1.27
This object indicates whether an ICMP time exceeded(fragment reassembly time exceeded out) message is transmitted to this Interface.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpIpVpnIpAdEntIcmpParamProbInStatus 1.3.6.1.4.1.119.2.3.3.13.11.12.1.28
This object indicates whether an ICMP parameter problem(in) message is transmitted to this Interface.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpIpVpnIpAdEntIcmpParamProbOutStatus 1.3.6.1.4.1.119.2.3.3.13.11.12.1.29
This object indicates whether an ICMP parameter problem(out) message is transmitted to this Interface.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpIpVpnIpAdEntProxyArpStatus 1.3.6.1.4.1.119.2.3.3.13.11.12.1.30
This object controls the operating status of the Proxy ARP in this Interface.This object is set to '1' to enable the Proxy ARP functionality, and is set to '2' to disable the Proxy ARP functionality.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpIpVpnIpAdEntDirectedBroadcastStatus 1.3.6.1.4.1.119.2.3.3.13.11.12.1.31
This object controls the operating status of the Directed Broadcast Forwarding in this Interface. This object is set to '1' to enable the Directed Broadcast Forwarding functionality, and is set to '2' to disable the Directed Broadcast Forwarding functionality.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpIpVpnIpAdEntPathThroughListNumber 1.3.6.1.4.1.119.2.3.3.13.11.12.1.32
This object controls the operating status of the Path Through Forwarding in this Interface. This object is set to 'except 0' to enable the Path Through Forwarding functionality, and is set to '0' to disable the Path Through Forwarding functionality.But, this number must be in relation to the direction-list.
OBJECT-TYPE    
  INTEGER 0..2147483647  

mpIpVpnIpAdEntExtendedStaticRouteListNumber 1.3.6.1.4.1.119.2.3.3.13.11.12.1.33
This object controls the operating status of the Extended Static Routing in this Interface. This object is set to 'except 0' to enable the Extended Static Routing functionality, and is set to '0' to disable the Extended Static Routing functionality.But, this number must be in relation to the direction-list.
OBJECT-TYPE    
  INTEGER 0..2147483647  

mpIpVpnIpCidrTable 1.3.6.1.4.1.119.2.3.3.13.11.13
The table of IP cidr information relevant to this entity's VPNID.
OBJECT-TYPE    
  SEQUENCE OF  
    MpIpVpnIpCidrEntry

mpIpVpnIpCidrEntry 1.3.6.1.4.1.119.2.3.3.13.11.13.1
The IP cidr information for one of this entity's VPNID.
OBJECT-TYPE    
  MpIpVpnIpCidrEntry  

mpIpVpnIpCidrVpnId 1.3.6.1.4.1.119.2.3.3.13.11.13.1.1
This is the index to identify the VPN entry. The value of this index must be assigned uniquely, witrhin the range of 1 - 65535.
OBJECT-TYPE    
  INTEGER  

mpIpVpnIpCidrRouteNumber 1.3.6.1.4.1.119.2.3.3.13.11.13.1.2
The number of current mpIpVpnIpCidrRouteTable entries that are not invalid.
OBJECT-TYPE    
  Gauge32  

mpIpVpnIpCidrRouteTable 1.3.6.1.4.1.119.2.3.3.13.11.14
This entity's IP Routing table.
OBJECT-TYPE    
  SEQUENCE OF  
    MpIpVpnIpCidrRouteEntry

mpIpVpnIpCidrRouteEntry 1.3.6.1.4.1.119.2.3.3.13.11.14.1
A particular route to a particular destina- tion, under a particular policy.
OBJECT-TYPE    
  MpIpVpnIpCidrRouteEntry  

mpIpVpnIpCidrRouteVpnId 1.3.6.1.4.1.119.2.3.3.13.11.14.1.1
This is the index to identify the VPN entry. The value of this index must be assigned uniquely, witrhin the range of 1 - 65535.
OBJECT-TYPE    
  INTEGER  

mpIpVpnIpCidrRouteDest 1.3.6.1.4.1.119.2.3.3.13.11.14.1.2
The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the mpIpVpnIpCidrRouteMask object is not equal to x.
OBJECT-TYPE    
  IpAddress  

mpIpVpnIpCidrRouteMask 1.3.6.1.4.1.119.2.3.3.13.11.14.1.3
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the mpIpVpnIpCidrRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the mpIpVpnIpCidrRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the mpIpVpnIpCidrRouteDest object is not equal to mpIpVpnIpCidrRouteDest.
OBJECT-TYPE    
  IpAddress  

mpIpVpnIpCidrRouteTos 1.3.6.1.4.1.119.2.3.3.13.11.14.1.4
The policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. +-----+-----+-----+-----+-----+-----+-----+-----+ | | | | | PRECEDENCE | TYPE OF SERVICE | 0 | | | | | +-----+-----+-----+-----+-----+-----+-----+-----+ IP TOS IP TOS Field Policy Field Policy Contents Code Contents Code 0 0 0 0 ==> 0 0 0 0 1 ==> 2 0 0 1 0 ==> 4 0 0 1 1 ==> 6 0 1 0 0 ==> 8 0 1 0 1 ==> 10 0 1 1 0 ==> 12 0 1 1 1 ==> 14 1 0 0 0 ==> 16 1 0 0 1 ==> 18 1 0 1 0 ==> 20 1 0 1 1 ==> 22 1 1 0 0 ==> 24 1 1 0 1 ==> 26 1 1 1 0 ==> 28 1 1 1 1 ==> 30
OBJECT-TYPE    
  Integer32  

mpIpVpnIpCidrRouteNextHop 1.3.6.1.4.1.119.2.3.3.13.11.14.1.5
On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0.
OBJECT-TYPE    
  IpAddress  

mpIpVpnIpCidrRouteIfIndex 1.3.6.1.4.1.119.2.3.3.13.11.14.1.6
The ifIndex value which identifies the local interface through which the next hop of this route should be reached.
OBJECT-TYPE    
  Integer32  

mpIpVpnIpCidrRouteType 1.3.6.1.4.1.119.2.3.3.13.11.14.1.7
The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destina- tion. Routes which do not result in traffic forwarding or rejection should not be displayed even if the implementation keeps them stored internally. reject (2) refers to a route which, if matched, discards the message as unreachable. This is used in some protocols as a means of correctly aggregating routes.
OBJECT-TYPE    
  INTEGER other(1), reject(2), local(3), remote(4)  

mpIpVpnIpCidrRouteProto 1.3.6.1.4.1.119.2.3.3.13.11.14.1.8
The routing mechanism via which this route was learned. Inclusion of values for gateway rout- ing protocols is not intended to imply that hosts should support those protocols.
OBJECT-TYPE    
  INTEGER other(1), local(2), netmgmt(3), icmp(4), egp(5), ggp(6), hello(7), rip(8), isIs(9), esIs(10), ciscoIgrp(11), bbnSpfIgp(12), ospf(13), bgp(14), idpr(15), ciscoEigrp(16)  

mpIpVpnIpCidrRouteAge 1.3.6.1.4.1.119.2.3.3.13.11.14.1.9
The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.
OBJECT-TYPE    
  Integer32  

mpIpVpnIpCidrRouteInfo 1.3.6.1.4.1.119.2.3.3.13.11.14.1.10
A reference to MIB definitions specific to the particular routing protocol which is responsi- ble for this route, as determined by the value specified in the route's mpIpVpnIpCidrRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntactically valid object identif- ier, and any implementation conforming to ASN.1 and the Basic Encoding Rules must be able to generate and recognize this value.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

mpIpVpnIpCidrRouteNextHopAS 1.3.6.1.4.1.119.2.3.3.13.11.14.1.11
The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's mpIpVpnIpCidrRouteProto value. When this object is unknown or not relevant its value should be set to zero.
OBJECT-TYPE    
  Integer32  

mpIpVpnIpCidrRouteMetric1 1.3.6.1.4.1.119.2.3.3.13.11.14.1.12
The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mpIpVpnIpCidrRouteProto value. If this metric is not used, its value should be set to -1.
OBJECT-TYPE    
  Integer32  

mpIpVpnIpCidrRouteMetric2 1.3.6.1.4.1.119.2.3.3.13.11.14.1.13
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mpIpVpnIpCidrRouteProto value. If this metric is not used, its value should be set to -1.
OBJECT-TYPE    
  Integer32  

mpIpVpnIpCidrRouteMetric3 1.3.6.1.4.1.119.2.3.3.13.11.14.1.14
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mpIpVpnIpCidrRouteProto value. If this metric is not used, its value should be set to -1.
OBJECT-TYPE    
  Integer32  

mpIpVpnIpCidrRouteMetric4 1.3.6.1.4.1.119.2.3.3.13.11.14.1.15
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mpIpVpnIpCidrRouteProto value. If this metric is not used, its value should be set to -1.
OBJECT-TYPE    
  Integer32  

mpIpVpnIpCidrRouteMetric5 1.3.6.1.4.1.119.2.3.3.13.11.14.1.16
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mpIpVpnIpCidrRouteProto value. If this metric is not used, its value should be set to -1.
OBJECT-TYPE    
  Integer32  

mpIpVpnIpCidrRouteStatus 1.3.6.1.4.1.119.2.3.3.13.11.14.1.17
The row status variable, used according to row installation and removal conventions.
OBJECT-TYPE    
  RowStatus  

mpIpVpnIpRouteTable 1.3.6.1.4.1.119.2.3.3.13.11.15
This entity's IP Routing table.
OBJECT-TYPE    
  SEQUENCE OF  
    MpIpVpnIpRouteEntry

mpIpVpnIpRouteEntry 1.3.6.1.4.1.119.2.3.3.13.11.15.1
A route to a particular destination.
OBJECT-TYPE    
  MpIpVpnIpRouteEntry  

mpIpVpnIpRouteVpnId 1.3.6.1.4.1.119.2.3.3.13.11.15.1.1
This is the index to identify the VPN entry. The value of this index must be assigned uniquely, witrhin the range of 1 - 65535.
OBJECT-TYPE    
  INTEGER  

mpIpVpnIpRouteDest 1.3.6.1.4.1.119.2.3.3.13.11.15.1.2
The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use.
OBJECT-TYPE    
  IpAddress  

mpIpVpnIpRouteIfIndex 1.3.6.1.4.1.119.2.3.3.13.11.15.1.3
The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  INTEGER  

mpIpVpnIpRouteMetric1 1.3.6.1.4.1.119.2.3.3.13.11.15.1.4
The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mpIpVpnIpRouteProto value. If this metric is not used, its value should be set to -1.
OBJECT-TYPE    
  INTEGER  

mpIpVpnIpRouteMetric2 1.3.6.1.4.1.119.2.3.3.13.11.15.1.5
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mpIpVpnIpRouteProto value. If this metric is not used, its value should be set to -1.
OBJECT-TYPE    
  INTEGER  

mpIpVpnIpRouteMetric3 1.3.6.1.4.1.119.2.3.3.13.11.15.1.6
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mpIpVpnIpRouteProto value. If this metric is not used, its value should be set to -1.
OBJECT-TYPE    
  INTEGER  

mpIpVpnIpRouteMetric4 1.3.6.1.4.1.119.2.3.3.13.11.15.1.7
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
OBJECT-TYPE    
  INTEGER  

mpIpVpnIpRouteNextHop 1.3.6.1.4.1.119.2.3.3.13.11.15.1.8
The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)
OBJECT-TYPE    
  IpAddress  

mpIpVpnIpRouteType 1.3.6.1.4.1.119.2.3.3.13.11.15.1.9
The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the mpIpVpnIpRouteTable object. That is, it effectively dissasociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant mpIpVpnIpRouteType object.
OBJECT-TYPE    
  INTEGER other(1), invalid(2), direct(3), indirect(4)  

mpIpVpnIpRouteProto 1.3.6.1.4.1.119.2.3.3.13.11.15.1.10
The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
OBJECT-TYPE    
  INTEGER other(1), local(2), netmgmt(3), icmp(4), egp(5), ggp(6), hello(7), rip(8), is-is(9), es-is(10), ciscoIgrp(11), bbnSpfIgp(12), ospf(13), bgp(14)  

mpIpVpnIpRouteAge 1.3.6.1.4.1.119.2.3.3.13.11.15.1.11
The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.
OBJECT-TYPE    
  INTEGER  

mpIpVpnIpRouteMask 1.3.6.1.4.1.119.2.3.3.13.11.15.1.12
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the mpIpVpnIpRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the mpIpVpnIpRouteMask by determining whether the value of the correspondent mpIpVpnIpRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the mpIpVpnIpRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism.
OBJECT-TYPE    
  IpAddress  

mpIpVpnIpRouteMetric5 1.3.6.1.4.1.119.2.3.3.13.11.15.1.13
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mpIpVpnIpRouteProto value. If this metric is not used, its value should be set to -1.
OBJECT-TYPE    
  INTEGER  

mpIpVpnIpRouteInfo 1.3.6.1.4.1.119.2.3.3.13.11.15.1.14
A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's mpIpVpnIpRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

mpIpVpnIpNetToMediaTable 1.3.6.1.4.1.119.2.3.3.13.11.16
The IP Address Translation table used for mapping from IP addresses to physical addresses.
OBJECT-TYPE    
  SEQUENCE OF  
    MpIpVpnIpNetToMediaEntry

mpIpVpnIpNetToMediaEntry 1.3.6.1.4.1.119.2.3.3.13.11.16.1
Each entry contains one IpAddress to `physical' address equivalence.
OBJECT-TYPE    
  MpIpVpnIpNetToMediaEntry  

mpIpVpnIpNetToMediaVpnId 1.3.6.1.4.1.119.2.3.3.13.11.16.1.1
This is the index to identify the VPN entry. The value of this index must be assigned uniquely, witrhin the range of 1 - 65535.
OBJECT-TYPE    
  INTEGER  

mpIpVpnIpNetToMediaIfIndex 1.3.6.1.4.1.119.2.3.3.13.11.16.1.2
The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  INTEGER  

mpIpVpnIpNetToMediaPhysAddress 1.3.6.1.4.1.119.2.3.3.13.11.16.1.3
The media-dependent `physical' address.
OBJECT-TYPE    
  PhysAddress  

mpIpVpnIpNetToMediaNetAddress 1.3.6.1.4.1.119.2.3.3.13.11.16.1.4
The IpAddress corresponding to the media- dependent `physical' address.
OBJECT-TYPE    
  IpAddress  

mpIpVpnIpNetToMediaType 1.3.6.1.4.1.119.2.3.3.13.11.16.1.5
The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the mpIpVpnIpNetToMediaTable. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant mpIpVpnIpNetToMediaType object.
OBJECT-TYPE    
  INTEGER other(1), invalid(2), dynamic(3), static(4)  

mpIpVpnStaticProxyArpTable 1.3.6.1.4.1.119.2.3.3.13.11.17
This entity's Static Proxy ARP table.
OBJECT-TYPE    
  SEQUENCE OF  
    MpIpVpnStaticProxyArpEntry

mpIpVpnStaticProxyArpEntry 1.3.6.1.4.1.119.2.3.3.13.11.17.1
This entity's Static Proxy ARP table.
OBJECT-TYPE    
  MpIpVpnStaticProxyArpEntry  

mpIpVpnStaticProxyArpVpnId 1.3.6.1.4.1.119.2.3.3.13.11.17.1.1
This is the index to identify the VPN entry. The value of this index must be assigned uniquely, witrhin the range of 1 - 65535.
OBJECT-TYPE    
  INTEGER  

mpIpVpnStaticProxyArpIfIndex 1.3.6.1.4.1.119.2.3.3.13.11.17.1.2
The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  INTEGER  

mpIpVpnStaticProxyArpNetAddress 1.3.6.1.4.1.119.2.3.3.13.11.17.1.3
The IpAddress corresponding to the media- dependent `physical' address.
OBJECT-TYPE    
  IpAddress  

mpIpVpnStaticProxyArpNetMask 1.3.6.1.4.1.119.2.3.3.13.11.17.1.4
The IpAddress corresponding to the media- dependent `physical' address.
OBJECT-TYPE    
  IpAddress  

mpIpVpnStaticProxyArpStatus 1.3.6.1.4.1.119.2.3.3.13.11.17.1.5
When an entry is created it autmatically becomes valid(1). When this object is set to invalid(2) then this entry will be deleted.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

mpIpVpnIcmpTable 1.3.6.1.4.1.119.2.3.3.13.11.18
The table of ICMP group information relevant to this entity's VPNID.
OBJECT-TYPE    
  SEQUENCE OF  
    MpIpVpnIcmpEntry

mpIpVpnIcmpEntry 1.3.6.1.4.1.119.2.3.3.13.11.18.1
The ICMP group information for one of this entity's VPNID.
OBJECT-TYPE    
  MpIpVpnIcmpEntry  

mpIpVpnIcmpVpnId 1.3.6.1.4.1.119.2.3.3.13.11.18.1.1
This is the index to identify the VPN entry. The value of this index must be assigned uniquely, witrhin the range of 1 - 65535.
OBJECT-TYPE    
  INTEGER  

mpIpVpnIcmpInMsgs 1.3.6.1.4.1.119.2.3.3.13.11.18.1.2
The total number of ICMP messages which the entity received. Note that this counter includes all those counted by mpIpVpnIcmpInErrors.
OBJECT-TYPE    
  Counter  

mpIpVpnIcmpInErrors 1.3.6.1.4.1.119.2.3.3.13.11.18.1.3
The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.).
OBJECT-TYPE    
  Counter  

mpIpVpnIcmpInDestUnreachs 1.3.6.1.4.1.119.2.3.3.13.11.18.1.4
The number of ICMP Destination Unreachable messages received.
OBJECT-TYPE    
  Counter  

mpIpVpnIcmpInTimeExcds 1.3.6.1.4.1.119.2.3.3.13.11.18.1.5
The number of ICMP Time Exceeded messages received.
OBJECT-TYPE    
  Counter  

mpIpVpnIcmpInParmProbs 1.3.6.1.4.1.119.2.3.3.13.11.18.1.6
The number of ICMP Parameter Problem messages received.
OBJECT-TYPE    
  Counter  

mpIpVpnIcmpInSrcQuenchs 1.3.6.1.4.1.119.2.3.3.13.11.18.1.7
The number of ICMP Source Quench messages received.
OBJECT-TYPE    
  Counter  

mpIpVpnIcmpInRedirects 1.3.6.1.4.1.119.2.3.3.13.11.18.1.8
The number of ICMP Redirect messages received.
OBJECT-TYPE    
  Counter  

mpIpVpnIcmpInEchos 1.3.6.1.4.1.119.2.3.3.13.11.18.1.9
The number of ICMP Echo (request) messages received.
OBJECT-TYPE    
  Counter  

mpIpVpnIcmpInEchoReps 1.3.6.1.4.1.119.2.3.3.13.11.18.1.10
The number of ICMP Echo Reply messages received.
OBJECT-TYPE    
  Counter  

mpIpVpnIcmpInTimestamps 1.3.6.1.4.1.119.2.3.3.13.11.18.1.11
The number of ICMP Timestamp (request) messages received.
OBJECT-TYPE    
  Counter  

mpIpVpnIcmpInTimestampReps 1.3.6.1.4.1.119.2.3.3.13.11.18.1.12
The number of ICMP Timestamp Reply messages received.
OBJECT-TYPE    
  Counter  

mpIpVpnIcmpInAddrMasks 1.3.6.1.4.1.119.2.3.3.13.11.18.1.13
The number of ICMP Address Mask Request messages received.
OBJECT-TYPE    
  Counter  

mpIpVpnIcmpInAddrMaskReps 1.3.6.1.4.1.119.2.3.3.13.11.18.1.14
The number of ICMP Address Mask Reply messages received.
OBJECT-TYPE    
  Counter  

mpIpVpnIcmpOutMsgs 1.3.6.1.4.1.119.2.3.3.13.11.18.1.15
The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by mpIpVpnIcmpOutErrors.
OBJECT-TYPE    
  Counter  

mpIpVpnIcmpOutErrors 1.3.6.1.4.1.119.2.3.3.13.11.18.1.16
The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of IP to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value.
OBJECT-TYPE    
  Counter  

mpIpVpnIcmpOutDestUnreachs 1.3.6.1.4.1.119.2.3.3.13.11.18.1.17
The number of ICMP Destination Unreachable messages sent.
OBJECT-TYPE    
  Counter  

mpIpVpnIcmpOutTimeExcds 1.3.6.1.4.1.119.2.3.3.13.11.18.1.18
The number of ICMP Time Exceeded messages sent.
OBJECT-TYPE    
  Counter  

mpIpVpnIcmpOutParmProbs 1.3.6.1.4.1.119.2.3.3.13.11.18.1.19
The number of ICMP Parameter Problem messages sent.
OBJECT-TYPE    
  Counter  

mpIpVpnIcmpOutSrcQuenchs 1.3.6.1.4.1.119.2.3.3.13.11.18.1.20
The number of ICMP Source Quench messages sent.
OBJECT-TYPE    
  Counter  

mpIpVpnIcmpOutRedirects 1.3.6.1.4.1.119.2.3.3.13.11.18.1.21
The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects.
OBJECT-TYPE    
  Counter  

mpIpVpnIcmpOutEchos 1.3.6.1.4.1.119.2.3.3.13.11.18.1.22
The number of ICMP Echo (request) messages sent.
OBJECT-TYPE    
  Counter  

mpIpVpnIcmpOutEchoReps 1.3.6.1.4.1.119.2.3.3.13.11.18.1.23
The number of ICMP Echo Reply messages sent.
OBJECT-TYPE    
  Counter  

mpIpVpnIcmpOutTimestamps 1.3.6.1.4.1.119.2.3.3.13.11.18.1.24
The number of ICMP Timestamp (request) messages sent.
OBJECT-TYPE    
  Counter  

mpIpVpnIcmpOutTimestampReps 1.3.6.1.4.1.119.2.3.3.13.11.18.1.25
The number of ICMP Timestamp Reply messages sent.
OBJECT-TYPE    
  Counter  

mpIpVpnIcmpOutAddrMasks 1.3.6.1.4.1.119.2.3.3.13.11.18.1.26
The number of ICMP Address Mask Request messages sent.
OBJECT-TYPE    
  Counter  

mpIpVpnIcmpOutAddrMaskReps 1.3.6.1.4.1.119.2.3.3.13.11.18.1.27
The number of ICMP Address Mask Reply messages sent.
OBJECT-TYPE    
  Counter  

mpIpVpnPingTable 1.3.6.1.4.1.119.2.3.3.13.11.19
The table of ping management information relevant to this entity's ICMP echo identifier.
OBJECT-TYPE    
  SEQUENCE OF  
    MpIpVpnPingEntry

mpIpVpnPingEntry 1.3.6.1.4.1.119.2.3.3.13.11.19.1
The ping management information for one of this entity's ICMP echo identifier.
OBJECT-TYPE    
  MpIpVpnPingEntry  

mpIpVpnPingId 1.3.6.1.4.1.119.2.3.3.13.11.19.1.1
This is the index to identify the ping entry. The value of this index must be assigned uniquely, within the range of 1 - 65535.
OBJECT-TYPE    
  INTEGER  

mpIpVpnPingVpnId 1.3.6.1.4.1.119.2.3.3.13.11.19.1.2
The value of this object is the VPNID for this entry, within the range of 1 - 65535.
OBJECT-TYPE    
  INTEGER  

mpIpVpnPingTarget 1.3.6.1.4.1.119.2.3.3.13.11.19.1.3
The value of this object is the destination IP address for this entry. This IP address must always be a unicast IP address and it should never be a Class D or E IP address.
OBJECT-TYPE    
  IpAddress  

mpIpVpnPingRequestSend 1.3.6.1.4.1.119.2.3.3.13.11.19.1.4
The value of this object is the ping request number of the times.
OBJECT-TYPE    
  INTEGER  

mpIpVpnPingDataLength 1.3.6.1.4.1.119.2.3.3.13.11.19.1.5
The value of this object is the ping data length, within the range of 0 - 65507.
OBJECT-TYPE    
  INTEGER  

mpIpVpnPingSendTos 1.3.6.1.4.1.119.2.3.3.13.11.19.1.6
The value of this object is the TOS value in ping packet, within the range of 0 - 0xfe.
OBJECT-TYPE    
  INTEGER  

mpIpVpnPingSendTtl 1.3.6.1.4.1.119.2.3.3.13.11.19.1.7
The value of this object is the TTL value in ping packet, within the range of 1 - 255.
OBJECT-TYPE    
  INTEGER  

mpIpVpnPingSendTimeOut 1.3.6.1.4.1.119.2.3.3.13.11.19.1.8
The value of this object is the ping time out value, within the range of 1 - 60 seconds.
OBJECT-TYPE    
  INTEGER  

mpIpVpnPingSendInterface 1.3.6.1.4.1.119.2.3.3.13.11.19.1.9
The value of this object is ifIndex. IP address assigned ifIndex is set as source IP address in ping packets.
OBJECT-TYPE    
  INTEGER  

mpIpVpnPingStatus 1.3.6.1.4.1.119.2.3.3.13.11.19.1.10
This object refers to the ping entry status. When this object is set to create(1), ping entry is created. Set to inProgress(2), ping is Started. When a reply or icmp error receiveed and time out occured, the status become complete(3). This object can not set to complete(3). Set to destroy(4), entry is deleted.
OBJECT-TYPE    
  INTEGER create(1), inProgress(2), complete(3), destroy(4)  

mpIpVpnPingResult 1.3.6.1.4.1.119.2.3.3.13.11.19.1.11
This object refers to the ping result status.
OBJECT-TYPE    
  INTEGER  

mpIpVpnPingErrorSourceAddress 1.3.6.1.4.1.119.2.3.3.13.11.19.1.12
This value of this object is the error source IP address in icmp error reply message.
OBJECT-TYPE    
  IpAddress  

mpRip 1.3.6.1.4.1.119.2.3.3.13.12
OBJECT IDENTIFIER    

mpRip2IfConfTable 1.3.6.1.4.1.119.2.3.3.13.12.1
This is the table type object of the RIP sending operation mode.
OBJECT-TYPE    
  SEQUENCE OF  
    MpRip2IfConfEntry

mpRip2IfConfEntry 1.3.6.1.4.1.119.2.3.3.13.12.1.1
This is the table entry of mpRip2IfconfTable.
OBJECT-TYPE    
  MpRip2IfConfEntry  

mpRip2IfConfAddress 1.3.6.1.4.1.119.2.3.3.13.12.1.1.1
This object specifies the IP address of the interface to which the RIP packet is sent.
OBJECT-TYPE    
  IpAddress  

mpRip2IfConfPoisoned 1.3.6.1.4.1.119.2.3.3.13.12.1.1.2
This object specifies the RIP sending mode of this interface. In case of Sprit Horizon with Poisoned Reverse, the value '1' is set to this object. In case of Sprit Horizon, the value '2' is set to this object.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpRip2IfConfSplitHorizon 1.3.6.1.4.1.119.2.3.3.13.12.1.1.3
The flag about Split-Horizon of this interface.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpRip2IfConfHostAdvertise 1.3.6.1.4.1.119.2.3.3.13.12.1.1.4
The flag which shows whether IP address of interface that condition is Down is transmitted as Host Route to this Interface.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpRip2IfConfInOffset 1.3.6.1.4.1.119.2.3.3.13.12.1.1.5
This object specifies the metric value to be added to the route information of RIP-response which is received from this interface.
OBJECT-TYPE    
  INTEGER 0..15  

mpRip2IfConfOutOffset 1.3.6.1.4.1.119.2.3.3.13.12.1.1.6
This object specifies the metric value to be added to the route information of RIP-response which is sent to this interface.
OBJECT-TYPE    
  INTEGER 0..15  

mpRip2IfConfDefType 1.3.6.1.4.1.119.2.3.3.13.12.1.1.7
The timing when default route is advertised to this interface.
OBJECT-TYPE    
  INTEGER no(1), distribute(2), always(3), importList(4)  

mpRip2IfConfDefMetric 1.3.6.1.4.1.119.2.3.3.13.12.1.1.8
The metric value of default route to be used when the advertised timing(mpRip2IfConfDefType) is set to 'always'.
OBJECT-TYPE    
  INTEGER 1..15  

mpRip2IfConfDefAddress 1.3.6.1.4.1.119.2.3.3.13.12.1.1.9
The next-hop IP addess of default route to be used when the advertised timing (mpRip2IfConfDefType) is set to 'always'.
OBJECT-TYPE    
  IpAddress  

mpRip2IfConfDefTag 1.3.6.1.4.1.119.2.3.3.13.12.1.1.10
The route tag of default route to be used when the advertised timing(mpRip2IfConfDefType) is set to 'always'.
OBJECT-TYPE    
  INTEGER 1..65535  

mpRip2IfConfDefProtocol 1.3.6.1.4.1.119.2.3.3.13.12.1.1.11
The protocol of routing table to be used for condition decision when the advertised timing (mpRip2IfConfDefType) is set to 'importList'.
OBJECT-TYPE    
  INTEGER local(2), static(3), ospf(13)  

mpRip2IfConfDefImportList 1.3.6.1.4.1.119.2.3.3.13.12.1.1.12
The route tag of default route to be used when the advertised timing(mpRip2IfConfDefType) is set to 'always'.
OBJECT-TYPE    
  INTEGER  

mpRip2IfConfRoutePriority 1.3.6.1.4.1.119.2.3.3.13.12.1.1.13
The route priority value which is used when the route information of RIP-response received from this interface is reflected. The value 0 means route priority is not used for each interface.
OBJECT-TYPE    
  INTEGER 0..255  

mpRip2PeerTable 1.3.6.1.4.1.119.2.3.3.13.12.2
The Neighbor information table to transmit RIP-response with unicast.
OBJECT-TYPE    
  SEQUENCE OF  
    MpRip2PeerEntry

mpRip2PeerEntry 1.3.6.1.4.1.119.2.3.3.13.12.2.1
The Neighbor information Entry to transmit RIP-response with unicast.
OBJECT-TYPE    
  MpRip2PeerEntry  

mpRip2PeerAddress 1.3.6.1.4.1.119.2.3.3.13.12.2.1.1
This object specifies IP Address of Neighbor which transmits RIP-response with unicast.
OBJECT-TYPE    
  IpAddress  

mpRip2PeerVersion 1.3.6.1.4.1.119.2.3.3.13.12.2.1.2
This object specifies version of RIP-response.
OBJECT-TYPE    
  INTEGER doNotSend(1), ripVersion1(2), rip1Compatible(3), ripVersion2(4)  

mpRip2PeerStatus 1.3.6.1.4.1.119.2.3.3.13.12.2.1.3
This object is used to create, delete, or modify this table entry.
OBJECT-TYPE    
  RowStatus  

mpRip2ImportListTable 1.3.6.1.4.1.119.2.3.3.13.12.3
The table for importing route information to other routing protocols or RIP.
OBJECT-TYPE    
  SEQUENCE OF  
    MpRip2ImportListEntry

mpRip2ImportListEntry 1.3.6.1.4.1.119.2.3.3.13.12.3.1
The table for importing route information to other routing protocols or RIP.
OBJECT-TYPE    
  MpRip2ImportListEntry  

mpRip2ImportListProtocol 1.3.6.1.4.1.119.2.3.3.13.12.3.1.1
This object specifies protocol of IP routing table.
OBJECT-TYPE    
  INTEGER local(2), static(3), ospf(13)  

mpRip2ImportListNumber 1.3.6.1.4.1.119.2.3.3.13.12.3.1.2
This object specifies import list number.
OBJECT-TYPE    
  INTEGER  

mpRip2ImportListStatus 1.3.6.1.4.1.119.2.3.3.13.12.3.1.3
This object is used to create, delete, or modify this table entry.
OBJECT-TYPE    
  RowStatus  

mpRip2NetworkPriorityTable 1.3.6.1.4.1.119.2.3.3.13.12.4
The table to specify route priority to each network at creating IP routing table.
OBJECT-TYPE    
  SEQUENCE OF  
    MpRip2NetworkPriorityEntry

mpRip2NetworkPriorityEntry 1.3.6.1.4.1.119.2.3.3.13.12.4.1
The entry to specify route priority to each network at creating IP routing table.
OBJECT-TYPE    
  MpRip2NetworkPriorityEntry  

mpRip2NetworkPriorityAddr 1.3.6.1.4.1.119.2.3.3.13.12.4.1.1
This object specifies network IP address.
OBJECT-TYPE    
  IpAddress  

mpRip2NetworkPriorityMask 1.3.6.1.4.1.119.2.3.3.13.12.4.1.2
This object specifies network mask.
OBJECT-TYPE    
  IpAddress  

mpRip2NetworkPriorityValue 1.3.6.1.4.1.119.2.3.3.13.12.4.1.3
This object specifies the value of route priority.
OBJECT-TYPE    
  INTEGER 1..255  

mpRip2NetworkPriorityStatus 1.3.6.1.4.1.119.2.3.3.13.12.4.1.4
This object is used to create, delete, or modify this table entry.
OBJECT-TYPE    
  RowStatus  

mpRip2RoutePriority 1.3.6.1.4.1.119.2.3.3.13.12.5
The route priority value to be used when the route information of RIP-response received is reflected. It is used when the route priority of interface has not been registered (mpRip2IfConfRoutePriority is 0) and route information doesn't correspond to any network route priority table(mpRip2NetworkPriorityTable).
OBJECT-TYPE    
  INTEGER 1..255  

mpSnmp 1.3.6.1.4.1.119.2.3.3.13.13
OBJECT IDENTIFIER    

mpSnmpCommunityTable 1.3.6.1.4.1.119.2.3.3.13.13.1
The community table (1-5 entries). This table lists community strings and their access levels. When a Snmp message is received by this entity, the community string in the message is compared with this table to determine access rights of sender.
OBJECT-TYPE    
  SEQUENCE OF  
    MpSnmpCommunityEntry

mpSnmpCommunityEntry 1.3.6.1.4.1.119.2.3.3.13.13.1.1
A community table entry.
OBJECT-TYPE    
  MpSnmpCommunityEntry  

mpSnmpCommunityIndex 1.3.6.1.4.1.119.2.3.3.13.13.1.1.1
This object specifies the addition/deletion of a particular trap community.
OBJECT-TYPE    
  INTEGER  

mpSnmpCommunityStatus 1.3.6.1.4.1.119.2.3.3.13.13.1.1.2
This object specifies the addition/deletion of a particular community. Entries 1 and 2 are reserved for public access( read-only ) and NEC's NMS read -write.
OBJECT-TYPE    
  INTEGER valid(1), notinuseyet(2), invalid(3)  

mpSnmpCommunityAccess 1.3.6.1.4.1.119.2.3.3.13.13.1.1.3
A value of readWrite(2) allows the community to read and write all objects in the MIB. A value of readOnly(1) allows the community to read all objs.
OBJECT-TYPE    
  INTEGER readOnly(1), readWrite(2)  

mpSnmpCommunityAddr 1.3.6.1.4.1.119.2.3.3.13.13.1.1.4
IP address of the registered NMS. This is actually a lists of IP addresses, maximum of 5. A special indexing must be implemented to get all the list of IP addresses for each entry.
OBJECT-TYPE    
  IpAddress  

mpSnmpCommunityName 1.3.6.1.4.1.119.2.3.3.13.13.1.1.5
Configurable community string with access rights defined by the value of sysCommunityAccess.
OBJECT-TYPE    
  DisplayString SIZE(1..64)  

mpSnmpTrapCommunityTable 1.3.6.1.4.1.119.2.3.3.13.13.2
The trap receiver table (0 to 5 entries). This table lists the addresses of stations that should receive trap messages from this entity when an exception condition occurs.
OBJECT-TYPE    
  SEQUENCE OF  
    MpSnmpTrapCommunityEntry

mpSnmpTrapCommunityEntry 1.3.6.1.4.1.119.2.3.3.13.13.2.1
A trap receiver table entry.
OBJECT-TYPE    
  MpSnmpTrapCommunityEntry  

mpSnmpTrapCommunityIndex 1.3.6.1.4.1.119.2.3.3.13.13.2.1.1
This object specifies the row for a particular trap community.
OBJECT-TYPE    
  INTEGER  

mpSnmpTrapCommunityStatus 1.3.6.1.4.1.119.2.3.3.13.13.2.1.2
This object specifies the addition/deletion of a particular trap community.
OBJECT-TYPE    
  INTEGER valid(1), notinuseyet(2), invalid(3)  

mpSnmpTrapCommunityType 1.3.6.1.4.1.119.2.3.3.13.13.2.1.3
This object specifies the recipient of a generated trap. AS of the moment only a NMS station is supported.
OBJECT-TYPE    
  INTEGER networkmanager(1), telephone(2), faxmachine(3), pager(4), emailaddress(5)  

mpSnmpTrapCommunityAddr 1.3.6.1.4.1.119.2.3.3.13.13.2.1.4
For type NMS,IP address for trap receiver. (For now type NMS is yet supported). For telephone,fax, and pager, phone number. For email, this is an Internet email address.
OBJECT-TYPE    
  IpAddress  

mpSnmpTrapCommunityName 1.3.6.1.4.1.119.2.3.3.13.13.2.1.5
Community string used for trap messages to this trap receiver.
OBJECT-TYPE    
  DisplayString SIZE(1..64)  

mpSnmpLockMib 1.3.6.1.4.1.119.2.3.3.13.13.3
OBJECT IDENTIFIER    

mpSnmpLockMibIPaddress 1.3.6.1.4.1.119.2.3.3.13.13.3.1
if IPaddress is 0.0.0.0, NMS doesn't SET LockMIB. if not, only 1 NMS is successing to SET LockMIB. note : NMS must SET own IPaddress to LockMIB before NMS tries to SET some specific MIB
OBJECT-TYPE    
  IpAddress  

mpStats 1.3.6.1.4.1.119.2.3.3.13.14
OBJECT IDENTIFIER    

mpMonitorGroupTable 1.3.6.1.4.1.119.2.3.3.13.14.1
Monitoring Group related details.
OBJECT-TYPE    
  SEQUENCE OF  
    MpMonitorGroupEntry

mpMonitorGroupEntry 1.3.6.1.4.1.119.2.3.3.13.14.1.1
Details for a group of monitored statistics.
OBJECT-TYPE    
  MpMonitorGroupEntry  

mpMonGrpIndex 1.3.6.1.4.1.119.2.3.3.13.14.1.1.1
Specifies the table entry.
OBJECT-TYPE    
  INTEGER  

mpMonGrpObjectId 1.3.6.1.4.1.119.2.3.3.13.14.1.1.2
Name of the port/module to which the info in the table entry applies to.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

mpMonGrpObjectInstance 1.3.6.1.4.1.119.2.3.3.13.14.1.1.3
Instance to which the info in the table entry applies to.
OBJECT-TYPE    
  INTEGER  

mpMonGrpPollInt 1.3.6.1.4.1.119.2.3.3.13.14.1.1.4
Interval at which the polling for values is done.
OBJECT-TYPE    
  INTEGER  

mpMonGrpStatus 1.3.6.1.4.1.119.2.3.3.13.14.1.1.5
Setting this field to disable deletes the entry from the list of monitored groups.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpMonGrpName 1.3.6.1.4.1.119.2.3.3.13.14.1.1.6
The text value of the monitor group. For release 1, read-only but release 2 will allow the user to set the monitor group name to any textual description.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

mpStatObjectTable 1.3.6.1.4.1.119.2.3.3.13.14.2
Object related statistics details.
OBJECT-TYPE    
  SEQUENCE OF  
    MpStatObjectEntry

mpStatObjectEntry 1.3.6.1.4.1.119.2.3.3.13.14.2.1
Details of statistics.
OBJECT-TYPE    
  MpStatObjectEntry  

mpStatObjectIndex 1.3.6.1.4.1.119.2.3.3.13.14.2.1.1
Specifies the table entry.
OBJECT-TYPE    
  INTEGER  

mpStatObjectGroupId 1.3.6.1.4.1.119.2.3.3.13.14.2.1.2
Monitoring Group that this obj belongs to.
OBJECT-TYPE    
  INTEGER  

mpStatObjectId 1.3.6.1.4.1.119.2.3.3.13.14.2.1.3
OID of the object.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

mpStatObjectName 1.3.6.1.4.1.119.2.3.3.13.14.2.1.4
Textual equivalent of the object.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

mpStatObjectCurValue 1.3.6.1.4.1.119.2.3.3.13.14.2.1.5
Current value of the object.
OBJECT-TYPE    
  INTEGER  

mpStatObjectCumRate 1.3.6.1.4.1.119.2.3.3.13.14.2.1.6
Cumulative rate of the object.
OBJECT-TYPE    
  INTEGER  

mpStatObjectIntRate 1.3.6.1.4.1.119.2.3.3.13.14.2.1.7
Rate of change of the objetc's statistics.
OBJECT-TYPE    
  INTEGER  

mpCli 1.3.6.1.4.1.119.2.3.3.13.15
OBJECT IDENTIFIER    

mpCliOperatorTable 1.3.6.1.4.1.119.2.3.3.13.15.1
Indicates the table of operator mode user for CLI
OBJECT-TYPE    
  SEQUENCE OF  
    MpCliOperatorEntry

mpCliOperatorEntry 1.3.6.1.4.1.119.2.3.3.13.15.1.1
Indicates the entry of operator mode user information.
OBJECT-TYPE    
  MpCliOperatorEntry  

mpCliOperatorIndex 1.3.6.1.4.1.119.2.3.3.13.15.1.1.1
This is the index to identify the existing operator mode user.
OBJECT-TYPE    
  INTEGER  

mpCliOperatorName 1.3.6.1.4.1.119.2.3.3.13.15.1.1.2
This object is the operator user name.
OBJECT-TYPE    
  DisplayString SIZE(0..40)  

mpCliOperatorPasswd 1.3.6.1.4.1.119.2.3.3.13.15.1.1.3
This object is the operator user password which is used for user login.
OBJECT-TYPE    
  DisplayString SIZE(0..40)  

mpCliOperatorLoginPasswd 1.3.6.1.4.1.119.2.3.3.13.15.1.1.4
This objects is the operator user password entered by user at login.
OBJECT-TYPE    
  DisplayString SIZE(0..40)  

mpCliOperatorStatus 1.3.6.1.4.1.119.2.3.3.13.15.1.1.5
This object specifies the addition/deletion of a operator.
OBJECT-TYPE    
  INTEGER valid(1), notinuseyet(2), invalid(3)  

mpCliSupervisorTable 1.3.6.1.4.1.119.2.3.3.13.15.2
Indicates the table of supervisor mode user for CLI
OBJECT-TYPE    
  SEQUENCE OF  
    MpCliSupervisorEntry

mpCliSupervisorEntry 1.3.6.1.4.1.119.2.3.3.13.15.2.1
Indicates the entry of supervisor mode user information.
OBJECT-TYPE    
  MpCliSupervisorEntry  

mpCliSupervisorIndex 1.3.6.1.4.1.119.2.3.3.13.15.2.1.1
This is the index to identify the existing supervisor mode user
OBJECT-TYPE    
  INTEGER  

mpCliSupervisorName 1.3.6.1.4.1.119.2.3.3.13.15.2.1.2
This object is the supervisor user name.
OBJECT-TYPE    
  DisplayString SIZE(0..40)  

mpCliSupervisorPasswd 1.3.6.1.4.1.119.2.3.3.13.15.2.1.3
This object is the supervisor user password which is used for user login.
OBJECT-TYPE    
  DisplayString SIZE(0..40)  

mpCliSupervisorLoginPasswd 1.3.6.1.4.1.119.2.3.3.13.15.2.1.4
This objects is the supervisor user password entered by user at login.
OBJECT-TYPE    
  DisplayString SIZE(0..40)  

mpCliSupervisorStatus 1.3.6.1.4.1.119.2.3.3.13.15.2.1.5
This object specifies the addition/deletion of a supervisor.
OBJECT-TYPE    
  INTEGER valid(1), notinuseyet(2), invalid(3)  

mpAtm 1.3.6.1.4.1.119.2.3.3.13.16
OBJECT IDENTIFIER    

mpAtmInterfaceConfTable 1.3.6.1.4.1.119.2.3.3.13.16.1
This table contains ATM local interface configuration parameters, one entry per ATM interface port.
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmInterfaceConfEntry

mpAtmInterfaceConfEntry 1.3.6.1.4.1.119.2.3.3.13.16.1.1
This list contains ATM interface configuration parameters and state variables.
OBJECT-TYPE    
  MpAtmInterfaceConfEntry  

mpAtmInterfaceIfIndex 1.3.6.1.4.1.119.2.3.3.13.16.1.1.1
Indicates the index value to identify the ATM interface in this equipment. Each ATM interface identified by this object is the same interface identified by the same number of ifIndex.
OBJECT-TYPE    
  INTEGER  

mpAtmInterfaceAdminPrefix 1.3.6.1.4.1.119.2.3.3.13.16.1.1.2
An prefix assigned for administrative purpose. This value is displayed as the instance of atmInterfaceAdminAddress object of ATM MIB.
OBJECT-TYPE    
  OCTET STRING SIZE(0 | 13)  

mpAtmInterfaceAdminEsi 1.3.6.1.4.1.119.2.3.3.13.16.1.1.3
An ESI assigned for administrative purpose. This value is displayed as the instance of atmInterfaceAdminAddress object of ATM MIB.
OBJECT-TYPE    
  OCTET STRING SIZE(0 | 6)  

mpAtmInterfaceMaxVpiVciBits 1.3.6.1.4.1.119.2.3.3.13.16.1.1.4
This object sets the maximum number of the sum of VPI/VCI bit number that are able to use at this interface.
OBJECT-TYPE    
  INTEGER  

mpAtmVccConfigTable 1.3.6.1.4.1.119.2.3.3.13.16.2
This table contains VCC configuration parameters, one entry per ATM interface port.
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmVccConfigEntry

mpAtmVccConfigEntry 1.3.6.1.4.1.119.2.3.3.13.16.2.1
This list contains VCC configuration parameters and state variables.
OBJECT-TYPE    
  MpAtmVccConfigEntry  

mpAtmVccIfIndex 1.3.6.1.4.1.119.2.3.3.13.16.2.1.1
Indicates the index value to identify the ATM interface in this equipment. Each ATM interface identified by this object is the same interface identified by the same number of ifIndex.
OBJECT-TYPE    
  INTEGER  

mpAtmVccFrameFormat 1.3.6.1.4.1.119.2.3.3.13.16.2.1.2
The type of frame format for use at this ATM interface.
OBJECT-TYPE    
  INTEGER sonet(1), sdh(2)  

mpAtmVccF4OamSupport 1.3.6.1.4.1.119.2.3.3.13.16.2.1.3
Indicates whether the F4 OAM functionality is supported or not, for the ATM interface of this equipment. This object can be modified only when all the ATM interfaces are blocked. If it is set to '1', the F5 OAM functionality is supported. If it is set to '2', it is not supported.
OBJECT-TYPE    
  INTEGER support(1), nonSupport(2)  

mpAtmVccF5OamSupport 1.3.6.1.4.1.119.2.3.3.13.16.2.1.4
Indicates whether the F5 OAM functionality is supported or not, for the ATM interface of this equipment. This object can be modified only when all the ATM interfaces are blocked. If it is set to '1', the F5 OAM functionality is supported. If it is set to '2', it is not supported.
OBJECT-TYPE    
  INTEGER support(1), nonSupport(2)  

mpAtmVccFailTimerLof 1.3.6.1.4.1.119.2.3.3.13.16.2.1.5
It is used to set the timer value of the LOF (Loss of Frames) failure detection timer (msec). It is possible to set the integer of a multiple of 100.
OBJECT-TYPE    
  INTEGER  

mpAtmVccFailTimerLos 1.3.6.1.4.1.119.2.3.3.13.16.2.1.6
It is used to set the timer value of the LOS (Loss of Signal) failure detection timer (msec). It is possible to set the integer of a multiple of 100.
OBJECT-TYPE    
  INTEGER  

mpAtmVccRecoverTimerLof 1.3.6.1.4.1.119.2.3.3.13.16.2.1.7
It is used to set the timer value of the LOF (Loss of Frames) recovery detection timer (msec). It is possible to set the integer of a multiple of 100.
OBJECT-TYPE    
  INTEGER  

mpAtmVccRecoverTimerLos 1.3.6.1.4.1.119.2.3.3.13.16.2.1.8
It is used to set the timer value of the LOS (Loss of Signal) recovery detection timer (msec). It is possible to set the integer of a multiple of 100.
OBJECT-TYPE    
  INTEGER  

mpAtmVccFailTimerLop 1.3.6.1.4.1.119.2.3.3.13.16.2.1.9
It is used to set the timer value of the LOP (Loss of Pointer) failure detection timer (msec). It is possible to set the integer of a multiple of 100.
OBJECT-TYPE    
  INTEGER  

mpAtmVccRecoverTimerLop 1.3.6.1.4.1.119.2.3.3.13.16.2.1.10
It is used to set the timer value of the LOP (Loss of Pointer) recovery detection timer (msec). It is possible to set the integer of a multiple of 100.
OBJECT-TYPE    
  INTEGER  

mpAtmVccCdv 1.3.6.1.4.1.119.2.3.3.13.16.2.1.11
It is used to set the value of CDV(Cell Delay Variation) which is used for ATM Mega-Link.
OBJECT-TYPE    
  INTEGER  

mpAtmVccClockMode 1.3.6.1.4.1.119.2.3.3.13.16.2.1.12
It is used to set clock mode of ATM. If it is set to '1', the clock received from the line is used. If it is set to '2', the internal clock is used.
OBJECT-TYPE    
  INTEGER line(1), internal(2)  

mpAtmSscopConfigTable 1.3.6.1.4.1.119.2.3.3.13.16.3
Indicates the table of SSCOP layer parameter configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmSscopConfigEntry

mpAtmSscopConfigEntry 1.3.6.1.4.1.119.2.3.3.13.16.3.1
Indicates the entry of SSCOP layer configuration.
OBJECT-TYPE    
  MpAtmSscopConfigEntry  

mpAtmSscopIfIndex 1.3.6.1.4.1.119.2.3.3.13.16.3.1.1
Indicates the index value to identify the ATM interface in this equipment. Each ATM interface identified by this object is the same interface identified by the same number of ifIndex.
OBJECT-TYPE    
  INTEGER  

mpAtmSscopTimerConnectControl 1.3.6.1.4.1.119.2.3.3.13.16.3.1.2
It is used to set the timer value of the SSCOP connection control PDU re-sending interval timer (msec). The timer value must be the same as the that of the equipment connected to itself. It is possible to set the integer of a multiple of 250.
OBJECT-TYPE    
  INTEGER  

mpAtmSscopTimerKeepalive 1.3.6.1.4.1.119.2.3.3.13.16.3.1.3
It is used to set the timer value of the POLL PDU re-sending interval timer, which is used when there is no SD PDU to be sent, in the data transmission phase (msec). The timer value must be the same as that of the equipment connected to itself. It is possible to set the integer of a multiple of 250.
OBJECT-TYPE    
  INTEGER  

mpAtmSscopTimerNoResponse 1.3.6.1.4.1.119.2.3.3.13.16.3.1.4
It is used to set the timer value of the STAT PDU waiting timer (msec). This is the connection observation timer in the data transmission phase. When it expires, the connection is disconnected. The timer value must be the same as that of the equipment connected to itself. It is possible to set the integer of a multiple of 250.
OBJECT-TYPE    
  INTEGER  

mpAtmSscopTimerPoll 1.3.6.1.4.1.119.2.3.3.13.16.3.1.5
It is used to set the timer value of the POLL PDU sending interval timer in the data transmission phase (msec). The timer value must be the same as that of the equipment connected to itself. It is possible to set the integer of a multiple of 250.
OBJECT-TYPE    
  INTEGER  

mpAtmSscopTimerIdle 1.3.6.1.4.1.119.2.3.3.13.16.3.1.6
It is used to set the timer value of the POLL PDU sending interval timer, which is used when there is no SD PDU to be sent, in the data transmission phase (msec). The timer value must be the same as that of the equipment connected to itself. It is possible to set the integer of a multiple of 250.
OBJECT-TYPE    
  INTEGER  

mpAtmSscopMaxConnectControl 1.3.6.1.4.1.119.2.3.3.13.16.3.1.7
Indicates the MAX retry count value of the SSCOP connection control PDU sending.
OBJECT-TYPE    
  INTEGER  

mpAtmSscopMaxPd 1.3.6.1.4.1.119.2.3.3.13.16.3.1.8
Indicates the sending timing of the POLL PDU. After the PDUs as many as the number specified by this object are sent, one POLL PDU is sent.
OBJECT-TYPE    
  INTEGER  

mpAtmSignalingConfigTable 1.3.6.1.4.1.119.2.3.3.13.16.4
This table contains ATM Signaling configuration parameters, one entry per ATM interface port.
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmSignalingConfigEntry

mpAtmSignalingConfigEntry 1.3.6.1.4.1.119.2.3.3.13.16.4.1
This list contains ATM signaling configuration parameters and state variables.
OBJECT-TYPE    
  MpAtmSignalingConfigEntry  

mpAtmSigIfIndex 1.3.6.1.4.1.119.2.3.3.13.16.4.1.1
Indicates the index value to identify the ATM interface in this equipment. Each ATM interface identified by this object is the same interface identified by the same number of ifIndex.
OBJECT-TYPE    
  INTEGER  

mpAtmSigSvcSupportFlag 1.3.6.1.4.1.119.2.3.3.13.16.4.1.2
Indicates whether the SVC functionality is supported or not, for the ATM interface of this equipment. If it is set to '1', SVC functionality is supported. If it is set to '2', it is not supported.
OBJECT-TYPE    
  INTEGER support(1), nonSupport(2)  

mpAtmSigUniVersion 1.3.6.1.4.1.119.2.3.3.13.16.4.1.3
This specifies the ATM Forum UNI version which is used by the ATM ports of this equipment as the ATM Signaling functionality. This object can be set only when all the ATM ports are closed. It is set to '1' in the case of UNI3.0, and is set to '2' in the case of UNI3.1.
OBJECT-TYPE    
  INTEGER uni3-0(1), uni3-1(2)  

mpAtmIlmiConfigTable 1.3.6.1.4.1.119.2.3.3.13.16.5
This table contains ILMI configuration parameters, one entry per ATM interface port.
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmIlmiConfigEntry

mpAtmIlmiConfigEntry 1.3.6.1.4.1.119.2.3.3.13.16.5.1
This list contains ILMI configuration parameters and state variables.
OBJECT-TYPE    
  MpAtmIlmiConfigEntry  

mpAtmIlmiIfIndex 1.3.6.1.4.1.119.2.3.3.13.16.5.1.1
Indicates the index value to identify the ATM interface in this equipment. Each ATM interface identified by this object is the same interface identified by the same number of ifIndex.
OBJECT-TYPE    
  INTEGER  

mpAtmIlmiFlag 1.3.6.1.4.1.119.2.3.3.13.16.5.1.2
This object indicates ILMI Function support status.
OBJECT-TYPE    
  INTEGER support(1), nonSupport(2)  

mpAtmStatisticsTable 1.3.6.1.4.1.119.2.3.3.13.16.6
Indicates the table of the statistics data of the SONET or SDH base ATM interface.
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmStatisticsEntry

mpAtmStatisticsEntry 1.3.6.1.4.1.119.2.3.3.13.16.6.1
Indicates the entry of the statistics data of each ATM interface.
OBJECT-TYPE    
  MpAtmStatisticsEntry  

mpAtmStatIfIndex 1.3.6.1.4.1.119.2.3.3.13.16.6.1.1
Indicates the index value to identify the ATM interface uniquely within the equipment. Each ATM interface identified by this object is the same ATM interface identified by the ifIndex.
OBJECT-TYPE    
  INTEGER  

mpAtmStatVpiVciErrs 1.3.6.1.4.1.119.2.3.3.13.16.6.1.2
Indicates the counter value of the VPI/VCI error.
OBJECT-TYPE    
  Counter  

mpAtmStatRcvOverRunErrs 1.3.6.1.4.1.119.2.3.3.13.16.6.1.3
Indicates the counter value of the receiving FIFO over-run error.
OBJECT-TYPE    
  Counter  

mpAtmStatInvalidCellErrs 1.3.6.1.4.1.119.2.3.3.13.16.6.1.4
Indicates the counter value of the received invalid cell.
OBJECT-TYPE    
  Counter  

mpAtmStatRcvBufEmptys 1.3.6.1.4.1.119.2.3.3.13.16.6.1.5
Indicates the counter value of the received free buffer empty.
OBJECT-TYPE    
  Counter  

mpAtmStatRcvStsAlmostFulls 1.3.6.1.4.1.119.2.3.3.13.16.6.1.6
Indicates the counter value of the Rx Status Queue Almost Full.
OBJECT-TYPE    
  Counter  

mpAtmStatSndStsAlmostFulls 1.3.6.1.4.1.119.2.3.3.13.16.6.1.7
Indicates the counter value of the Tx Status Queue Almost Full.
OBJECT-TYPE    
  Counter  

mpAtmStatOolErrs 1.3.6.1.4.1.119.2.3.3.13.16.6.1.8
Indicates OOL(Out of Lock) error counter value.
OBJECT-TYPE    
  Counter  

mpAtmStatLocErrs 1.3.6.1.4.1.119.2.3.3.13.16.6.1.9
Indicates LOC(Loss Of Cell Delineation) error counter value.
OBJECT-TYPE    
  Counter  

mpAtmStatHecErrs 1.3.6.1.4.1.119.2.3.3.13.16.6.1.10
Indicates the ATM cell HEC error counter value.
OBJECT-TYPE    
  Counter  

mpAtmStatOcdErrs 1.3.6.1.4.1.119.2.3.3.13.16.6.1.11
Indicates OCD(Out Of Cell Delineation) error counter value.
OBJECT-TYPE    
  Counter  

mpAtmStatTcOverFlowErrs 1.3.6.1.4.1.119.2.3.3.13.16.6.1.12
Indicates the counter value of the FIFO overflow.
OBJECT-TYPE    
  Counter  

mpAtmStatParityErrs 1.3.6.1.4.1.119.2.3.3.13.16.6.1.13
Indicates the counter value of the parity error.
OBJECT-TYPE    
  Counter  

mpAtmStatC2Errs 1.3.6.1.4.1.119.2.3.3.13.16.6.1.14
Indicates the C2 error counter value.
OBJECT-TYPE    
  Counter  

mpAtmStatLopErrs 1.3.6.1.4.1.119.2.3.3.13.16.6.1.15
Indicates the LOP(Loss of Pointer) error counter value.
OBJECT-TYPE    
  Counter  

mpAtmStatPaisErrs 1.3.6.1.4.1.119.2.3.3.13.16.6.1.16
Indicates the Path Alarm Indication error counter value.
OBJECT-TYPE    
  Counter  

mpAtmStatPrdiErrs 1.3.6.1.4.1.119.2.3.3.13.16.6.1.17
Indicates the Path Remote Path Indication error counter value.
OBJECT-TYPE    
  Counter  

mpAtmStatB3Errs 1.3.6.1.4.1.119.2.3.3.13.16.6.1.18
Indicates the B3 error counter value.
OBJECT-TYPE    
  Counter  

mpAtmStatPathFebeErrs 1.3.6.1.4.1.119.2.3.3.13.16.6.1.19
Indicates the Path FEBE error counter value.
OBJECT-TYPE    
  Counter  

mpAtmStatB2Errs 1.3.6.1.4.1.119.2.3.3.13.16.6.1.20
Indicates the B2 error counter value.
OBJECT-TYPE    
  Counter  

mpAtmStatLineFebeErrs 1.3.6.1.4.1.119.2.3.3.13.16.6.1.21
Indicates the Line FEBE error counter value.
OBJECT-TYPE    
  Counter  

mpAtmStatLaisErrs 1.3.6.1.4.1.119.2.3.3.13.16.6.1.22
Indicates the Line Alarm Indication error counter value.
OBJECT-TYPE    
  Counter  

mpAtmStatLrdiErrs 1.3.6.1.4.1.119.2.3.3.13.16.6.1.23
Indicates the Line Remote Path indication error counter value.
OBJECT-TYPE    
  Counter  

mpAtmStatOofErrs 1.3.6.1.4.1.119.2.3.3.13.16.6.1.24
Indicates the OOF(Out of Frame) error counter value.
OBJECT-TYPE    
  Counter  

mpAtmStatB1Errs 1.3.6.1.4.1.119.2.3.3.13.16.6.1.25
Indicates the B1 error counter value.
OBJECT-TYPE    
  Counter  

mpAtmStatLosErrs 1.3.6.1.4.1.119.2.3.3.13.16.6.1.26
Indicates the LOS(Loss of Signal) error counter value.
OBJECT-TYPE    
  Counter  

mpAtmStatLofErrs 1.3.6.1.4.1.119.2.3.3.13.16.6.1.27
Inicates the LOF(Loss of Frame) error counter value.
OBJECT-TYPE    
  Counter  

mpAtmStatInPackets 1.3.6.1.4.1.119.2.3.3.13.16.6.1.28
Indicates the counter value of the incoming packets.
OBJECT-TYPE    
  Counter  

mpAtmStatInOctets 1.3.6.1.4.1.119.2.3.3.13.16.6.1.29
Indicates the counter value of the incoming octets.
OBJECT-TYPE    
  Counter  

mpAtmStatOutPackets 1.3.6.1.4.1.119.2.3.3.13.16.6.1.30
Indicates the counter value of the outgoing packets.
OBJECT-TYPE    
  Counter  

mpAtmStatOutOctets 1.3.6.1.4.1.119.2.3.3.13.16.6.1.31
Indicates the counter value of the outgoing octets.
OBJECT-TYPE    
  Counter  

mpAtmNetPrefixTable 1.3.6.1.4.1.119.2.3.3.13.16.7
This table contains network prefix of ATM address got by ILMI.
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmNetPrefixEntry

mpAtmNetPrefixEntry 1.3.6.1.4.1.119.2.3.3.13.16.7.1
This list contains network prefix of ATM address got by ILMI.
OBJECT-TYPE    
  MpAtmNetPrefixEntry  

mpAtmNetPrefixPort 1.3.6.1.4.1.119.2.3.3.13.16.7.1.1
A unique value which identifies the ATM Port.
OBJECT-TYPE    
  INTEGER  

mpAtmNetPrefixPrefix 1.3.6.1.4.1.119.2.3.3.13.16.7.1.2
The network Prefix for ATM address.
OBJECT-TYPE    
  NetPrefix  

mpAtmNetPrefixStatus 1.3.6.1.4.1.119.2.3.3.13.16.7.1.3
Indicates the validity of the network prefix.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

mpAtmVpcTable 1.3.6.1.4.1.119.2.3.3.13.16.8
This table contains VPL configuration parameters, one entry per ATM interface port.
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmVpcEntry

mpAtmVpcEntry 1.3.6.1.4.1.119.2.3.3.13.16.8.1
This list contains VPL configuration parameters and state variables.
OBJECT-TYPE    
  MpAtmVpcEntry  

mpAtmVpcIfIndex 1.3.6.1.4.1.119.2.3.3.13.16.8.1.1
Indicates the index value to identify the ATM interface in this equipment. Each ATM interface identified by this object is the same interface identified by the same number of ifIndex.
OBJECT-TYPE    
  INTEGER  

mpAtmVpcVpi 1.3.6.1.4.1.119.2.3.3.13.16.8.1.2
The VPI value of the VPL. Note that the VPI=0 is not used for a VPL not associated with a VCL. The maximum VPI value cannot exceed the value allowable by the atmInterfaceMaxVpiBits.
OBJECT-TYPE    
  INTEGER  

mpAtmVpcAdminStatus 1.3.6.1.4.1.119.2.3.3.13.16.8.1.3
This object is implemented only for a VPL which terminates a VPC (i.e., one which is NOT cross-connected to other VPLs). Its value specifies the desired administrative state of the VPL. The up and down states indicate that the traffic flow is enabled and disabled respectively for this VPL.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mpAtmVpcOperStatus 1.3.6.1.4.1.119.2.3.3.13.16.8.1.4
This object indicates the current operational status of the VPL. The up and down states indicate that the VPL is currently operational, or not operational, respectively. The unknown state indicates that the status of this VPL cannot be determined.
OBJECT-TYPE    
  INTEGER up(1), down(2), unknown(3)  

mpAtmVpcLastChange 1.3.6.1.4.1.119.2.3.3.13.16.8.1.5
The value of MIB II's sysUpTime object at the time this VPL entered its current operational state. If the current state was entered prior to the last re-initialization of the agent, then this object contains a zero value.
OBJECT-TYPE    
  TimeStamp  

mpAtmVpcShapingType 1.3.6.1.4.1.119.2.3.3.13.16.8.1.6
This object indicates shaping type used for VPC status.
OBJECT-TYPE    
  INTEGER vpShaping(1), vcShaping(2)  

mpAtmVpcTransmitTrafficDescrIndex 1.3.6.1.4.1.119.2.3.3.13.16.8.1.7
The value of this object identifies the row of the ATM Traffic Descriptor Table which applies to the transmit direction of this VCL.
OBJECT-TYPE    
  INTEGER  

mpAtmVpcRowStatus 1.3.6.1.4.1.119.2.3.3.13.16.8.1.8
This object is used to create, delete or modify a row in this table. To create a new VCL, this object is initially set to 'createAndWait' or 'createAndGo'. This object must not be set to 'active' unless the following columnar objects exist in this row: atmVclReceiveTrafficDescrIndex, atmVclTransmitTrafficDescrIndex. In addition, if the local VCL end-point is also the VCC end-point: atmVccAalType. In addition, for AAL5 connections only: atmVccAal5CpcsTransmitSduSize, atmVccAal5CpcsReceiveSduSize, and atmVccAal5EncapsType.
OBJECT-TYPE    
  RowStatus  

mpAtmTrafficTable 1.3.6.1.4.1.119.2.3.3.13.16.9
This table contains information on ATM traffic parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    MpAtmTrafficEntry

mpAtmTrafficEntry 1.3.6.1.4.1.119.2.3.3.13.16.9.1
This list contains ATM traffic parameters.
OBJECT-TYPE    
  MpAtmTrafficEntry  

mpAtmTrafficDescrParamIndex 1.3.6.1.4.1.119.2.3.3.13.16.9.1.1
Indicates the index of ATM traffic entry.
OBJECT-TYPE    
  INTEGER  

mpAtmTrafficCdv 1.3.6.1.4.1.119.2.3.3.13.16.9.1.2
Indicate the CDV(Cell Delay Variation) value
OBJECT-TYPE    
  INTEGER 0..750  

mpLis 1.3.6.1.4.1.119.2.3.3.13.17
OBJECT IDENTIFIER    

mpLisNameTable 1.3.6.1.4.1.119.2.3.3.13.17.1
A table that is used for registoring LIS name.
OBJECT-TYPE    
  SEQUENCE OF  
    MpLisNameEntry

mpLisNameEntry 1.3.6.1.4.1.119.2.3.3.13.17.1.1
An entry of LIS name.
OBJECT-TYPE    
  MpLisNameEntry  

mpLisIndex 1.3.6.1.4.1.119.2.3.3.13.17.1.1.1
A number that uniquely assigned to the LIS.
OBJECT-TYPE    
  INTEGER  

mpLisRtrIndex 1.3.6.1.4.1.119.2.3.3.13.17.1.1.2
An interface number that uniquely assigned to the LIS of the Unit. The LIS recognized by this number is the same as what is recognized by same number of ifIndex.
OBJECT-TYPE    
  INTEGER  

mpLisName 1.3.6.1.4.1.119.2.3.3.13.17.1.1.3
A name assigned to the LIS for management purpose. This object is used for setting or changing a name of the LIS.
OBJECT-TYPE    
  DisplayString SIZE(0..40)  

mpLisNameStatus 1.3.6.1.4.1.119.2.3.3.13.17.1.1.4
This object is used for registoring or deleting an entry of the table. 1 is set when registroing and 2 is set when deletion.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

mpLisAdminTable 1.3.6.1.4.1.119.2.3.3.13.17.2
A table including LIS information.
OBJECT-TYPE    
  SEQUENCE OF  
    MpLisAdminEntry

mpLisAdminEntry 1.3.6.1.4.1.119.2.3.3.13.17.2.1
An entry in LIS management table. Registoring LIS (1) Manager satation generates a LIS entry in mpLisAdminTable by setting mpLisAdmRowStatus as createAndWait(5). (2) Manager station, if necessary, sets value of management object of mpLisAdminTable. (3) Manager station enables a LIS entry by setting mpLisAdmRowStatus as active(1). Deletion of LIS (1) Manager station disables a LIS entry bu setting mpLisAdmRowStatus as notInService(2). (2) A LIS is deleted by setting mpLisAdmRowStatus as destroy(6). An agent may release all related resources at the moment.
OBJECT-TYPE    
  MpLisAdminEntry  

mpLisAdmIndex 1.3.6.1.4.1.119.2.3.3.13.17.2.1.1
This object shows a unique number assigned to this LIS.
OBJECT-TYPE    
  INTEGER  

mpLisAdmAtmArpSvExistence 1.3.6.1.4.1.119.2.3.3.13.17.2.1.2
This object identifies extistence or non-existence of ATM ARP server. If it exists, 1 is set. If it does not exist, 2 is set.
OBJECT-TYPE    
  INTEGER existence(1), notExisting(2)  

mpLisAdmAtmArpSvCallType 1.3.6.1.4.1.119.2.3.3.13.17.2.1.3
This object shows a type of connection between the LIS and an ATM ARP server. If it is SVC, 1 is shown. If it is PVC, 2 is shown.
OBJECT-TYPE    
  INTEGER svc(1), pcv(2)  

mpLisAdmAtmArpSvAtmAddress 1.3.6.1.4.1.119.2.3.3.13.17.2.1.4
This object assigns ATM address of an ATM ARP server in the LIS.
OBJECT-TYPE    
  OCTET STRING SIZE(0 | 20)  

mpLisAdmAtmArpSvAtmPortNumber 1.3.6.1.4.1.119.2.3.3.13.17.2.1.5
This object assigns a number of ATM port which is used when the LIS is connected to the ATM server by PVC. If these are conencted by SVC, this object shows currently assigned number of ATM port.
OBJECT-TYPE    
  INTEGER  

mpLisAdmAtmArpSvVpi 1.3.6.1.4.1.119.2.3.3.13.17.2.1.6
This object assigns a number of VPI which is used when the LIS is connected to the ATM server by PVC. If these are conencted by SVC, this object shows currently assigned number of VPI.
OBJECT-TYPE    
  INTEGER  

mpLisAdmAtmArpSvVci 1.3.6.1.4.1.119.2.3.3.13.17.2.1.7
This object assigns a number of VCI which is used when the LIS is connected to the ATM server by PVC. If these are conencted by SVC, this object shows currently assigned number of VCI.
OBJECT-TYPE    
  INTEGER  

mpLisAdmSvTrafficId 1.3.6.1.4.1.119.2.3.3.13.17.2.1.8
This object assigns a number of traffic ID which is used when the LIS is connected to the ATM server.
OBJECT-TYPE    
  INTEGER  

mpLisAdmAtmArpSvVcStatus 1.3.6.1.4.1.119.2.3.3.13.17.2.1.9
This object shows status of connection between the LIS and an ATM ARP server in follwing number: Open = 1 Being configurated = 2 Available to use = 3 Available to transmit to ATM = 4 Available to transmit and receiving to/from ATM = 5 Available to receive from ATM = 6 Being disconnected = 7 Waiting for disconnection = 8
OBJECT-TYPE    
  INTEGER open(1), setting(2), usable(3), sendToAtm(4), sendAndRcvAtm(5), rcvFromAtm(6), disconnect(7), disconnectWaiting(8)  

mpLisAdmAtmArpSvRetryCount 1.3.6.1.4.1.119.2.3.3.13.17.2.1.10
This object shows the number of retrying of connection request caused by connection failure between ATM ARP server and the LIS.
OBJECT-TYPE    
  INTEGER  

mpLisAdmLisStatus 1.3.6.1.4.1.119.2.3.3.13.17.2.1.11
This object shows status of connection between the LIS and an ATM ARP server in following number: the LIS is available = 1 waiting for In-ATM-ARP-request = 2 not available due to failure = 3 not available by configuration = 4
OBJECT-TYPE    
  INTEGER usable(1), in-ATM-ARP-request-waiting(2), down(3), notInService(4)  

mpLisAdmMyAtmAddressSel 1.3.6.1.4.1.119.2.3.3.13.17.2.1.12
This object assignes ATM address that is used by the LIS interface.
OBJECT-TYPE    
  OCTET STRING SIZE(0 | 1)  

mpLisAdmMyIpAddress 1.3.6.1.4.1.119.2.3.3.13.17.2.1.13
This object assignes IP address that is used by the LIS interface.
OBJECT-TYPE    
  IpAddress  

mpLisAdmMyNetMask 1.3.6.1.4.1.119.2.3.3.13.17.2.1.14
This object assignes subnet mask of IP addresss that is used by the LIS interface.
OBJECT-TYPE    
  IpAddress  

mpLisAdmAtmPortNumber 1.3.6.1.4.1.119.2.3.3.13.17.2.1.15
This object assignes number of ATM port that is used by the LIS interface.
OBJECT-TYPE    
  INTEGER  

mpLisAdmAtmArpTables 1.3.6.1.4.1.119.2.3.3.13.17.2.1.16
This object shows the number of ARP tables that are registored in the LIS.
OBJECT-TYPE    
  INTEGER  

mpLisAdmSndMtuSize 1.3.6.1.4.1.119.2.3.3.13.17.2.1.17
This object assigns the maximum size of transmitted AAL5 CPCS PDU payload in octet.
OBJECT-TYPE    
  INTEGER  

mpLisAdmRcvMtuSize 1.3.6.1.4.1.119.2.3.3.13.17.2.1.18
This object assigns the maximum size of received AAL5 CPCS PDU payload in octet.
OBJECT-TYPE    
  INTEGER  

mpLisAdmTrafficId 1.3.6.1.4.1.119.2.3.3.13.17.2.1.19
This object shows the number of default traffic ID that is used by the LIS interface.
OBJECT-TYPE    
  INTEGER  

mpLisAdmRowStatus 1.3.6.1.4.1.119.2.3.3.13.17.2.1.20
The object is used for generating, deleting or modifying a row of the table. In case of of modifying this entry, this object must be changed from active(1) to notInService(2).
OBJECT-TYPE    
  RowStatus  

mpLisAtmArpAdminTable 1.3.6.1.4.1.119.2.3.3.13.17.3
The table includes information of ATM ARP table.
OBJECT-TYPE    
  SEQUENCE OF  
    MpLisAtmArpAdminEntry

mpLisAtmArpAdminEntry 1.3.6.1.4.1.119.2.3.3.13.17.3.1
The entry includes information of each ATM ARP table. Registration of PVC or static SVC (1) Manager generates an ATM ARP management entry in mpLisAtmArpAdminTable by setting mpLisAtmArpAdmRowStatus as createAndWait(5). (2) Manager sets the number of management object of mpLisAtmArpAdminTable if necessary. (3) Manager enables the ATM ARP entry by setting mpLisAtmArpAdmRowStatus as active(1). Deletion of PVC or static SVC (1) Manager disables the ATM ARP entry by setting mpLisAtmArpAdmRowStatus as notInService(2). (2) ATM ARP is deleted by setting mpLisAtmArpAdmRowStatus as destroy(6). An agent may release all related resources at the moment.
OBJECT-TYPE    
  MpLisAtmArpAdminEntry  

mpLisAtmArpAdmLisIndex 1.3.6.1.4.1.119.2.3.3.13.17.3.1.1
This object shows the unique number assigned to the LIS.
OBJECT-TYPE    
  INTEGER  

mpLisAtmArpAdmCallType 1.3.6.1.4.1.119.2.3.3.13.17.3.1.2
This object shows the type of connection between ATM ARP client and the LIS. If it is dynamic SVC, 1 is shown. If it is static SVC, 2 is shown. If it is PVC with aging, 3 is shown. If it is PVC without aging, 3 is shown.
OBJECT-TYPE    
  INTEGER dynamicSvc(1), staticSvc(2), agingPvc(3), noAgingPvc(4)  

mpLisAtmArpAdmIpAddress 1.3.6.1.4.1.119.2.3.3.13.17.3.1.3
This object is used for configuring or acknowledging of destination IP address. if the connection between ATM ARP client and the LIS is PVC. If the connection is dynamic SVC or static SVC, the object cannot be set. However it shows the currently used destination IP address.
OBJECT-TYPE    
  IpAddress  

mpLisAtmArpAdmAtmAddress 1.3.6.1.4.1.119.2.3.3.13.17.3.1.4
This object is used for configuring or acknowledging of destination ATM address. if the connection between ATM ARP client and the LIS is PVC. If the connection is dynamic SVC or static SVC, the object cannot be set. However it shows the currently used destination ATM address.
OBJECT-TYPE    
  OCTET STRING SIZE(0 | 20)  

mpLisAtmArpAdmMyAtmAddress 1.3.6.1.4.1.119.2.3.3.13.17.3.1.5
This object assigns an ATM address that is used at the interface of the LIS.
OBJECT-TYPE    
  OCTET STRING SIZE(0 | 20)  

mpLisAtmArpAdmAtmPortNumber 1.3.6.1.4.1.119.2.3.3.13.17.3.1.6
This object assigns a number of ATM port which is used when the LIS is connected to the ATM client by PVC. If these are conencted by dynamic SVC or static SVC, this object shows currently assigned number of ATM port.
OBJECT-TYPE    
  INTEGER  

mpLisAtmArpAdmVpi 1.3.6.1.4.1.119.2.3.3.13.17.3.1.7
This object assigns a number of VPI which is used when the LIS is connected to the ATM client by PVC. If these are conencted by dynamic SVC or static SVC, this object shows currently assigned number of VPI.
OBJECT-TYPE    
  INTEGER  

mpLisAtmArpAdmVci 1.3.6.1.4.1.119.2.3.3.13.17.3.1.8
This object assigns a number of VCI which is used when the LIS is connected to the ATM client by PVC. If these are conencted by dynamic SVC or static SVC, this object shows currently assigned number of VCI.
OBJECT-TYPE    
  INTEGER  

mpLisAtmArpAdmTrafficId 1.3.6.1.4.1.119.2.3.3.13.17.3.1.9
This object shows the number of traffic ID that is used for PVC connection between ATM ARP cliennt and the LIS.
OBJECT-TYPE    
  INTEGER  

mpLisAtmArpAdmTableStatus 1.3.6.1.4.1.119.2.3.3.13.17.3.1.10
This object shows status of ATM ARP table in follwing number: the table is available = 1 waiting for acknowledge of being available = 2 waiting for ATM-ARP-reply = 3 waiting for InATM-ARP-reply = 4 aging = 5 not available to service = 6 not available to use = 7
OBJECT-TYPE    
  INTEGER usable(1), confirming(2), atmArpReplyWaiting(3), inAtmArpRequestWaiting(4), aging(5), noService(6), unused(7)  

mpLisAtmArpAdmAgingTime 1.3.6.1.4.1.119.2.3.3.13.17.3.1.11
Indicates the passing time value (sec) of the ATMARP table aging timer. The timer is incre- mented by 1 sec.
OBJECT-TYPE    
  Gauge  

mpLisAtmArpAdmRetryCount 1.3.6.1.4.1.119.2.3.3.13.17.3.1.12
This object shows the number of retrying of connection request caused by connection failure between ATM ARP client and the LIS.
OBJECT-TYPE    
  INTEGER  

mpLisAtmArpAdmRowStatus 1.3.6.1.4.1.119.2.3.3.13.17.3.1.13
The object is used for generating, deleting or modifying a row of the table. In case of modifying this entry. This object must be changed from active(1) to notInService(2).
OBJECT-TYPE    
  RowStatus  

mpLisVcAdminTable 1.3.6.1.4.1.119.2.3.3.13.17.4
The table includes information of VC table.
OBJECT-TYPE    
  SEQUENCE OF  
    MpLisVcAdminEntry

mpLisVcAdminEntry 1.3.6.1.4.1.119.2.3.3.13.17.4.1
The entry includes information of each VC.
OBJECT-TYPE    
  MpLisVcAdminEntry  

mpLisVcAdmLisIndex 1.3.6.1.4.1.119.2.3.3.13.17.4.1.1
This object shows the unique number assigned to the LIS.
OBJECT-TYPE    
  INTEGER  

mpLisVcAdmIpAddress 1.3.6.1.4.1.119.2.3.3.13.17.4.1.2
This object assign the destination IP address.
OBJECT-TYPE    
  IpAddress  

mpLisVcAdmType 1.3.6.1.4.1.119.2.3.3.13.17.4.1.3
This object shows the type of VC management table. If the table is generated by originating connection, the type is 1. If the table is generated by receiving connection, the type is 2.
OBJECT-TYPE    
  INTEGER send-out(1), receive-in(2)  

mpLisVcAdmVcStatus 1.3.6.1.4.1.119.2.3.3.13.17.4.1.4
This object shows the status of VC connection as following numbers: Open = 1 Being configurated = 2 Available to use = 3 Available to transmit to ATM = 4 Available to transmit and receiving to/from ATM = 5 Available to receive from ATM = 6 Being disconected = 7 Waiting for disconection =8
OBJECT-TYPE    
  INTEGER open(1), setting(2), usable(3), sendToAtm(4), sendAndRcvAtm(5), rcvFromAtm(6), disconnect(7), disconnectWaiting(8)  

mpLisVcAdmInactivityTime 1.3.6.1.4.1.119.2.3.3.13.17.4.1.5
Indicates the passing time value (sec) of the inactivity timer. The timer is incremented by 1 sec.
OBJECT-TYPE    
  Gauge  

mpLisVcAdmHoldingTime 1.3.6.1.4.1.119.2.3.3.13.17.4.1.6
Indicates the remaining time value (sec) of the holding timer. The timer is incremented by 1 sec.
OBJECT-TYPE    
  Gauge  

mpLisStatisticsTable 1.3.6.1.4.1.119.2.3.3.13.17.5
This object includes statistics information of the LIS.
OBJECT-TYPE    
  SEQUENCE OF  
    MpLisStatisticsEntry

mpLisStatisticsEntry 1.3.6.1.4.1.119.2.3.3.13.17.5.1
This entry includes counters of each statistics information.
OBJECT-TYPE    
  MpLisStatisticsEntry  

mpLisStatIndex 1.3.6.1.4.1.119.2.3.3.13.17.5.1.1
This object shows the unique number assigned to the LIS.
OBJECT-TYPE    
  INTEGER  

mpLisStatAtmArpRequestSends 1.3.6.1.4.1.119.2.3.3.13.17.5.1.2
This object shows the number of transmission of ATM ARP request.
OBJECT-TYPE    
  Counter  

mpLisStatAtmArpReplyReceives 1.3.6.1.4.1.119.2.3.3.13.17.5.1.3
This object shows the number of receiving of ATM ARP reply.
OBJECT-TYPE    
  Counter  

mpLisStatAtmArpNakReceives 1.3.6.1.4.1.119.2.3.3.13.17.5.1.4
This object shows the number of receiving of ATM ARP NAK.
OBJECT-TYPE    
  Counter  

mpLisStatAtmArpReplyTimeouts 1.3.6.1.4.1.119.2.3.3.13.17.5.1.5
This object shows the number of timed-out in waiting for ATM ARP reply.
OBJECT-TYPE    
  Counter  

mpLisStatInAtmArpRequestSends 1.3.6.1.4.1.119.2.3.3.13.17.5.1.6
This object shows the number of transmission of InATM ARP request.
OBJECT-TYPE    
  Counter  

mpLisStatInAtmArpReplyReceives 1.3.6.1.4.1.119.2.3.3.13.17.5.1.7
This object shows the number of receiving of InATM ARP reply.
OBJECT-TYPE    
  Counter  

mpLisStatInAtmArpRequestReceives 1.3.6.1.4.1.119.2.3.3.13.17.5.1.8
This object shows the number of receiving of InATM ARP request.
OBJECT-TYPE    
  Counter  

mpLisStatInAtmArpReplyTimeouts 1.3.6.1.4.1.119.2.3.3.13.17.5.1.9
This object shows the number of timed-out in waiting for InATM ARP reply.
OBJECT-TYPE    
  Counter  

mpLisStatVcInactDisconnects 1.3.6.1.4.1.119.2.3.3.13.17.5.1.10
This object shows the number of disconenction by inactivity timer.
OBJECT-TYPE    
  Counter  

mpLisStatVcResourceDisconnects 1.3.6.1.4.1.119.2.3.3.13.17.5.1.11
This object shows the number of disconenction by resource limitation.
OBJECT-TYPE    
  Counter  

mpLisStatAtmArpTableAgingouts 1.3.6.1.4.1.119.2.3.3.13.17.5.1.12
This object show the number of ATM ARP table that is deleted due to aged out.
OBJECT-TYPE    
  Counter  

mpLisStatAtmArpTableDeletions 1.3.6.1.4.1.119.2.3.3.13.17.5.1.13
This object show the number of ATM ARP table that is deleted due to resource limitation.
OBJECT-TYPE    
  Counter  

mpLisStatInPkts 1.3.6.1.4.1.119.2.3.3.13.17.5.1.14
This object show the number of packets transmitted to IP router part.
OBJECT-TYPE    
  Counter  

mpLisStatInReceivePkts 1.3.6.1.4.1.119.2.3.3.13.17.5.1.15
This object show the number of packets received from ATM interface.
OBJECT-TYPE    
  Counter  

mpLisStatInDiscards 1.3.6.1.4.1.119.2.3.3.13.17.5.1.16
This object show the number of packets that are discarded due to resource limitation.
OBJECT-TYPE    
  Counter  

mpLisStatInMtuSizeOvers 1.3.6.1.4.1.119.2.3.3.13.17.5.1.17
This object show the number of discarded packets due to exceeding MTU.
OBJECT-TYPE    
  Counter  

mpLisStatInSnapErrs 1.3.6.1.4.1.119.2.3.3.13.17.5.1.18
This object show the number of discarded packets due to format error of SNAP in IP over ATM.
OBJECT-TYPE    
  Counter  

mpLisStatOutPkts 1.3.6.1.4.1.119.2.3.3.13.17.5.1.19
This object show the number of packets received from IP router part.
OBJECT-TYPE    
  Counter  

mpLisStatOutTransmitPkts 1.3.6.1.4.1.119.2.3.3.13.17.5.1.20
This object show the number of packets transmitted to ATM interface.
OBJECT-TYPE    
  Counter  

mpLisStatOutNoRoutes 1.3.6.1.4.1.119.2.3.3.13.17.5.1.21
This object show the number of discarded packets due to route unknown.
OBJECT-TYPE    
  Counter  

mpLisStatOutSvFaults 1.3.6.1.4.1.119.2.3.3.13.17.5.1.22
This object show the number of discarded packets due to failure of ATM ARP server.
OBJECT-TYPE    
  Counter  

mpLisStatOutCircuitFaults 1.3.6.1.4.1.119.2.3.3.13.17.5.1.23
This object show the number of discarded packets due to failure of link.
OBJECT-TYPE    
  Counter  

mpLisStatOutMaxQueues 1.3.6.1.4.1.119.2.3.3.13.17.5.1.24
This object show the number of discarded packets due to overflowing queue.
OBJECT-TYPE    
  Counter  

mpLisStatOutDestUnusuals 1.3.6.1.4.1.119.2.3.3.13.17.5.1.25
This object show the number of discarded packets due to illegal destination.
OBJECT-TYPE    
  Counter  

mpLisStatOutMtuSizeOvers 1.3.6.1.4.1.119.2.3.3.13.17.5.1.26
This object show the number of discarded packets that are received from IP router part due to exceeding MTU.
OBJECT-TYPE    
  Counter  

mpLisStatOutVcFailures 1.3.6.1.4.1.119.2.3.3.13.17.5.1.27
This object show the number of discarded packets due to configuration failure of connection.
OBJECT-TYPE    
  Counter  

mpLisStatOutDiscards 1.3.6.1.4.1.119.2.3.3.13.17.5.1.28
This object show the number of discarded packets due to resource limitation in transmitting.
OBJECT-TYPE    
  Counter  

mpLisStatOutMaxVcExceeds 1.3.6.1.4.1.119.2.3.3.13.17.5.1.29
This object show the number of discarded packets due to exceeding the maximum number of VC connection.
OBJECT-TYPE    
  Counter  

mpLisStatVcSetupCounts 1.3.6.1.4.1.119.2.3.3.13.17.5.1.30
This object shows the number of configuring of call.
OBJECT-TYPE    
  Counter  

mpLisStatVcMaxExceedFailCounts 1.3.6.1.4.1.119.2.3.3.13.17.5.1.31
This object shows the number of failure of call configuration due to exceeding the maximum simultaneous connections of VC.
OBJECT-TYPE    
  Counter  

mpLisStatVcResourceFailCounts 1.3.6.1.4.1.119.2.3.3.13.17.5.1.32
This object shows the number of failure of call configuration due to resource limitation.
OBJECT-TYPE    
  Counter  

mpLisStatVcAcceptCounts 1.3.6.1.4.1.119.2.3.3.13.17.5.1.33
This object shows the number of called by ATM ARP client.
OBJECT-TYPE    
  Counter  

mpLisStatVcMaxExceedDenyCounts 1.3.6.1.4.1.119.2.3.3.13.17.5.1.34
This object shows the number of refusing incoming call due to exceeding the maximum simultaneous connections of VC.
OBJECT-TYPE    
  Counter  

mpLisStatVcResourceDenyCounts 1.3.6.1.4.1.119.2.3.3.13.17.5.1.35
This object shows the number of refusing incoming call due to resource limitation.
OBJECT-TYPE    
  Counter  

mpLisPvcRegistNumber 1.3.6.1.4.1.119.2.3.3.13.17.6
This object shows the total number of currently registored PVC.
OBJECT-TYPE    
  INTEGER  

mpLisStSvcRegistNumber 1.3.6.1.4.1.119.2.3.3.13.17.7
This object shows the total number of currently registored static SVC.
OBJECT-TYPE    
  INTEGER  

mpLisVcConnectNumber 1.3.6.1.4.1.119.2.3.3.13.17.8
This object shows the total number of currently connected VC in IP over ATM functional block.
OBJECT-TYPE    
  INTEGER  

mpLisSysInactivityTimer 1.3.6.1.4.1.119.2.3.3.13.17.9
This object shows the value of inactivity timer in second.
OBJECT-TYPE    
  INTEGER  

mpLisSysHoldingTimer 1.3.6.1.4.1.119.2.3.3.13.17.10
This object shows the value of holding timer in second.
OBJECT-TYPE    
  INTEGER  

mpLisSysAtmArpReplyTimer 1.3.6.1.4.1.119.2.3.3.13.17.11
This object shows the value of ATM ARP reply waiting timer in second.
OBJECT-TYPE    
  INTEGER  

mpLisSysInAtmArpRequestTimer 1.3.6.1.4.1.119.2.3.3.13.17.12
This object shows the value of In ATM ARP request waiting timer in second.
OBJECT-TYPE    
  INTEGER  

mpLisSysInAtmArpReplyTimer 1.3.6.1.4.1.119.2.3.3.13.17.13
This object shows the value of In ATM ARP reply waiting timer in second.
OBJECT-TYPE    
  INTEGER  

mpLisSysAtmArpAgingTime 1.3.6.1.4.1.119.2.3.3.13.17.14
This object sets the aging time of ATM ARP in second.
OBJECT-TYPE    
  INTEGER  

mpLisSysAtmArpSvPollTime 1.3.6.1.4.1.119.2.3.3.13.17.15
This obhject sets cycle time to check status of VC connection of ATM ARP server in second.
OBJECT-TYPE    
  INTEGER  

mpLisSysAtmArpSvRetry 1.3.6.1.4.1.119.2.3.3.13.17.16
This object sets the number of retrying in case of failure of call configuration to ATM ARP server.
OBJECT-TYPE    
  INTEGER  

mpLisSysAtmArpClRetry 1.3.6.1.4.1.119.2.3.3.13.17.17
This object sets the number of retrying in case of failure of call configuration to ATM ARP client.
OBJECT-TYPE    
  INTEGER  

mpLisSysAtmArpReqRetry 1.3.6.1.4.1.119.2.3.3.13.17.18
This object sets tne number of retrying of ATM ARP request in case of no response from ATM ARP server to which ATM ARP request is sent before timer expiration.
OBJECT-TYPE    
  INTEGER  

mpLisSysInAtmArpReqRetry 1.3.6.1.4.1.119.2.3.3.13.17.19
This object sets tne number of retrying of InATM ARP request in case of no response from ATM ARP client to which InATM ARP request is sent before timer expiration.
OBJECT-TYPE    
  INTEGER  

mpLisSysMaxVcConnect 1.3.6.1.4.1.119.2.3.3.13.17.20
This object sets the maximum number of simultaneous connections that is used in IP over ATM functional block. This number is the sum of PVC, dynamic SVC and static SVC that are able to connect simultaneously.
OBJECT-TYPE    
  INTEGER  

mpLisSysMaxQueueNumber 1.3.6.1.4.1.119.2.3.3.13.17.21
The object sets the maximum number of queues include packets that are received from IP router.
OBJECT-TYPE    
  INTEGER  

mpDns 1.3.6.1.4.1.119.2.3.3.13.18
OBJECT IDENTIFIER    

mpDnsClientNameServerTable 1.3.6.1.4.1.119.2.3.3.13.18.1
Table of DNS name server IP addresses.
OBJECT-TYPE    
  SEQUENCE OF  
    MpDnsClientNameServerEntry

mpDnsClientNameServerEntry 1.3.6.1.4.1.119.2.3.3.13.18.1.1
Entry of DNS name server IP address.
OBJECT-TYPE    
  MpDnsClientNameServerEntry  

mpDnsClientServerEntIpAddress 1.3.6.1.4.1.119.2.3.3.13.18.1.1.1
DNS name server IP address.
OBJECT-TYPE    
  IpAddress  

mpDnsClientServerEntStatus 1.3.6.1.4.1.119.2.3.3.13.18.1.1.2
DNS name server table entry status.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

mpDnsClientStaticRRTable 1.3.6.1.4.1.119.2.3.3.13.18.2
Table of DNS Resource Records(RR).
OBJECT-TYPE    
  SEQUENCE OF  
    MpDnsClientStaticRREntry

mpDnsClientStaticRREntry 1.3.6.1.4.1.119.2.3.3.13.18.2.1
Entry of DNS Resource Record.
OBJECT-TYPE    
  MpDnsClientStaticRREntry  

mpDnsClientStaticRREntIndex 1.3.6.1.4.1.119.2.3.3.13.18.2.1.1
Index of a particular entry.
OBJECT-TYPE    
  INTEGER  

mpDnsClientStaticRREntHostName 1.3.6.1.4.1.119.2.3.3.13.18.2.1.2
The RR's host name field.
OBJECT-TYPE    
  DisplayString SIZE(0..60)  

mpDnsClientStaticRREntTimeToLive 1.3.6.1.4.1.119.2.3.3.13.18.2.1.3
The RR's Time to Live field. Currently, this value can be set to -1 (infinity) only.
OBJECT-TYPE    
  INTEGER  

mpDnsClientStaticRREntType 1.3.6.1.4.1.119.2.3.3.13.18.2.1.4
The RR's type field.
OBJECT-TYPE    
  INTEGER type-a(1)  

mpDnsClientStaticRREntIpAddress 1.3.6.1.4.1.119.2.3.3.13.18.2.1.5
The RR's IP address field.
OBJECT-TYPE    
  IpAddress  

mpDnsClientStaticRREntStatus 1.3.6.1.4.1.119.2.3.3.13.18.2.1.6
The RR's entry status.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

mpDnsClientLocalDomainTable 1.3.6.1.4.1.119.2.3.3.13.18.3
Table of DNS local domain names.
OBJECT-TYPE    
  SEQUENCE OF  
    MpDnsClientLocalDomainEntry

mpDnsClientLocalDomainEntry 1.3.6.1.4.1.119.2.3.3.13.18.3.1
Entry of DNS local domain name.
OBJECT-TYPE    
  MpDnsClientLocalDomainEntry  

mpDnsClientLocalDomainEntIndex 1.3.6.1.4.1.119.2.3.3.13.18.3.1.1
Index of a particular entry.
OBJECT-TYPE    
  INTEGER  

mpDnsClientLocalDomainEntName 1.3.6.1.4.1.119.2.3.3.13.18.3.1.2
Local domain name field.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

mpDnsClientLocalDomainEntStatus 1.3.6.1.4.1.119.2.3.3.13.18.3.1.3
Local domain table entry status.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

mpDnsClientMaxTimeToLive 1.3.6.1.4.1.119.2.3.3.13.18.4
DNS cache maximum Time to Live(TTL).
OBJECT-TYPE    
  INTEGER  

mpDnsClientNumberOfQueries 1.3.6.1.4.1.119.2.3.3.13.18.5
A counter on how many RR queries have been sent to name server(s).
OBJECT-TYPE    
  Counter  

mpDnsClientNumberOfResponses 1.3.6.1.4.1.119.2.3.3.13.18.6
A counter on how many RR responses have been received from name server(s).
OBJECT-TYPE    
  Counter  

mpLec 1.3.6.1.4.1.119.2.3.3.13.19
OBJECT IDENTIFIER    

mpLecConfigTable 1.3.6.1.4.1.119.2.3.3.13.19.1
Indicates the table of the LEC information.
OBJECT-TYPE    
  SEQUENCE OF  
    MpLecConfigEntry

mpLecConfigEntry 1.3.6.1.4.1.119.2.3.3.13.19.1.1
Indicates the entry of the LEC information.
OBJECT-TYPE    
  MpLecConfigEntry  

mpLecIndex 1.3.6.1.4.1.119.2.3.3.13.19.1.1.1
Indicates the index value to identify this entry.
OBJECT-TYPE    
  INTEGER  

mpLecArpCacheDeleteTime 1.3.6.1.4.1.119.2.3.3.13.19.1.1.2
The aging time for the unused ARP cache entry (sec).
OBJECT-TYPE    
  INTEGER  

mpLecUnsolicArpResAccept 1.3.6.1.4.1.119.2.3.3.13.19.1.1.3
Indicate whether the LEC does the address learning by the LE_ARP_RESPONSE which is broadcasted to another LEC, or not. If the value 'enabled(1)' is set, the LEC does the address learning. If the value 'disabled(2)' is set, the LEC does not do the address learning.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpLecVccAgingAction 1.3.6.1.4.1.119.2.3.3.13.19.1.1.4
Indicate whether the LEC disconnects the unused VCC for a time defined as C12. The time value is given by the lecVCCTimeoutPeriod (LEC MIB). If the value 'noCut(1)' is set, the LEC does not disconnect the VCC. If the value 'myConnectCut(2)' is set, the LEC disconnects only the VCC which the LEC sets up. If the value 'otherConnectCut(3)' is set, the LEC disconnects only the VCC which the destination LEC sets up. If the value 'allCut(4)' is set, the LEC disconnects all the VCCs.
OBJECT-TYPE    
  INTEGER noCut(1), myConnectCut(2), otherConnectCut(3), allCut(4)  

mpLecUnknownFrameSendTiming 1.3.6.1.4.1.119.2.3.3.13.19.1.1.5
Indicate the timing to send an unknown frame to the BUS. If the value 'soon(1)' is set, the LEC sends the packet immediately. If the value 'later(2)' is set, the LEC sends the packet after a time defined by mpLeUnknownFrameWaitTime. If the value 'noSend(3)' is set, the LEC does not send the packet.
OBJECT-TYPE    
  INTEGER soon(1), later(2), noSend(3)  

mpLecType 1.3.6.1.4.1.119.2.3.3.13.19.1.1.6
Indicates one of the LEC types described as follows: a) The LEC defined by ATM Forum b) The proprietary LEC (serverless method) defined by NEC. If it is set to '1', this entry uses the method defined by ATM Forum. If it is set to '2', this entry uses the proprietary LEC defined by NEC.
OBJECT-TYPE    
  INTEGER atmForum(1), serverLess(2)  

mpLecPrimaryAtmInterface 1.3.6.1.4.1.119.2.3.3.13.19.1.1.7
Indicates number of ATM port which is used for decision of primary ATM address.
OBJECT-TYPE    
  INTEGER  

mpLecDefaultSendTrafficId 1.3.6.1.4.1.119.2.3.3.13.19.1.1.8
Indicates the number of default send traffic ID that is used by LEC.
OBJECT-TYPE    
  INTEGER  

mpLecAtmAddressSel 1.3.6.1.4.1.119.2.3.3.13.19.1.1.9
Indicates SEL of primary ATM address for LEC
OBJECT-TYPE    
  OCTET STRING 1  

mpLecDefaultRcvTrafficId 1.3.6.1.4.1.119.2.3.3.13.19.1.1.10
Indicates the number of default receive traffic ID that is used by LEC.
OBJECT-TYPE    
  INTEGER  

mpLecLecsId 1.3.6.1.4.1.119.2.3.3.13.19.1.1.11
Indicates the number of Lecs ID that is used by LEC.
OBJECT-TYPE    
  INTEGER  

mpLecsConfigTable 1.3.6.1.4.1.119.2.3.3.13.19.2
Indicates the table of LECS information.
OBJECT-TYPE    
  SEQUENCE OF  
    MpLecsConfigEntry

mpLecsConfigEntry 1.3.6.1.4.1.119.2.3.3.13.19.2.1
Indicates the table entry of LECS information. LECS Registration: 1) The object 'mpLecsRowStatus' is set to 'createAndWait(5)', to create LECS entry into the table 'mpLecsConfigTable'. 2) The appropriate values are set to the object 'mpLecsConfigTable'. 3) 'active(1)' is set to the object 'mpLecRowStatus', to activate the LECS entry. LECS deletion: 1) 'notInService(2)' is set to the object 'mpLecsRowStatus', to deactivate the LECS entry. 2) 'destroy(6)' is set to the object 'mpLecRowStatus', to delete the LECS entry.
OBJECT-TYPE    
  MpLecsConfigEntry  

mpLecsIndex 1.3.6.1.4.1.119.2.3.3.13.19.2.1.1
Indicates the index value to identify this table entry.
OBJECT-TYPE    
  INTEGER  

mpLecsCallType 1.3.6.1.4.1.119.2.3.3.13.19.2.1.2
Indicates the type of the connection between this LEC and the LECS. If it is set to '1', the type is SVC for ATM address registration. If it is set to '2', the type is PVC for VPI/VCI registration.
OBJECT-TYPE    
  INTEGER staticSvc(1), pvc(2)  

mpLecsAtmAddress 1.3.6.1.4.1.119.2.3.3.13.19.2.1.3
Indicates the ATM address of the LECS.
OBJECT-TYPE    
  OCTET STRING SIZE(0..255)  

mpLecsInterface 1.3.6.1.4.1.119.2.3.3.13.19.2.1.4
Indicates the ATM interface number to which the LECS is connected.
OBJECT-TYPE    
  INTEGER  

mpLecsConfigDirectVpi 1.3.6.1.4.1.119.2.3.3.13.19.2.1.5
Indicates the VPI of the Configuration Direct VCC.
OBJECT-TYPE    
  INTEGER 0..255  

mpLecsConfigDirectVci 1.3.6.1.4.1.119.2.3.3.13.19.2.1.6
Indicates the VCI of the Configuration Direct VCC.
OBJECT-TYPE    
  INTEGER 0..65535  

mpLecsConfigDirectSendTrafficId 1.3.6.1.4.1.119.2.3.3.13.19.2.1.7
Indicates the send traffic ID of the Configuration Direct VCC.
OBJECT-TYPE    
  INTEGER  

mpLecsRowStatus 1.3.6.1.4.1.119.2.3.3.13.19.2.1.8
This object is used to create, delete, or modify the row within this table. Within each conceptual mpLecsConfigTable row, objects which are writable may be modified regardless of the value of mpLecsRowStatus. It is not necessary to set a row's status to 'notInService' first.
OBJECT-TYPE    
  RowStatus  

mpLecsConfigDirectRcvTrafficId 1.3.6.1.4.1.119.2.3.3.13.19.2.1.9
Indicates receive the traffic ID of the Configuration Direct VCC.
OBJECT-TYPE    
  INTEGER  

mpLecServerConfigTable 1.3.6.1.4.1.119.2.3.3.13.19.3
Indicates the table of the Server Information.
OBJECT-TYPE    
  SEQUENCE OF  
    MpLecServerConfigEntry

mpLecServerConfigEntry 1.3.6.1.4.1.119.2.3.3.13.19.3.1
Indicates the entry of the Server Information.
OBJECT-TYPE    
  MpLecServerConfigEntry  

mpLecSvIndex 1.3.6.1.4.1.119.2.3.3.13.19.3.1.1
Indicates the lecIndex of the LEC which corresponds to this entry.
OBJECT-TYPE    
  INTEGER  

mpLecSvConfigLecsType 1.3.6.1.4.1.119.2.3.3.13.19.3.1.2
Indicates whether the LECS registered in the table 'mpLecsConfigTable' is used or not, when 'automatic(1)' is set to the object 'lecConfigMode'(LEC MIB). If it is set to '2', the LECS is not used. In case when the LECS registered is not used, the LECS should be specified by the method defined by ATM Forum.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpLecSvConfigLecsIndex 1.3.6.1.4.1.119.2.3.3.13.19.3.1.3
Indicates the 'mpLecsIndex' of the table 'mpLecsConfigTable', to identify the LECS. This object is valid only when 'enable(1)' is set to the object 'mpLecsSvConfigLecsType'.
OBJECT-TYPE    
  INTEGER  

mpLecSvLesCallType 1.3.6.1.4.1.119.2.3.3.13.19.3.1.4
Indicates the type of the connection between this LEC and the LES.
OBJECT-TYPE    
  INTEGER staticSvc(1), pvc(2)  

mpLecSvCtrlDirectVccInterface 1.3.6.1.4.1.119.2.3.3.13.19.3.1.5
Indicates the ATM interface number on which the Control Direct VCC is set.
OBJECT-TYPE    
  INTEGER  

mpLecSvCtrlDirectVpi 1.3.6.1.4.1.119.2.3.3.13.19.3.1.6
Indicates the VPI of this Control Direct VCC.
OBJECT-TYPE    
  INTEGER  

mpLecSvCtrlDirectVci 1.3.6.1.4.1.119.2.3.3.13.19.3.1.7
Indicates the VCI of this Control Direct VCC.
OBJECT-TYPE    
  INTEGER  

mpLecSvCtrlDirectSendTrafficId 1.3.6.1.4.1.119.2.3.3.13.19.3.1.8
Indicates the shaper send traffic ID of the Control Direct VCC.
OBJECT-TYPE    
  INTEGER  

mpLecSvCtrlDistributeVccInterface 1.3.6.1.4.1.119.2.3.3.13.19.3.1.9
Indicates the ATM interface number on which the Control Distribute VCC is set.
OBJECT-TYPE    
  INTEGER  

mpLecSvCtrlDistributeVpi 1.3.6.1.4.1.119.2.3.3.13.19.3.1.10
Indicates the VPI of the Control Distribute VCC.
OBJECT-TYPE    
  INTEGER  

mpLecSvCtrlDistributeVci 1.3.6.1.4.1.119.2.3.3.13.19.3.1.11
Indicates the VCI of the Control Distribute VCC.
OBJECT-TYPE    
  INTEGER  

mpLecSvCtrlDistributeSendTrafficId 1.3.6.1.4.1.119.2.3.3.13.19.3.1.12
Indicates the send traffic ID of the Control Distribute VCC.
OBJECT-TYPE    
  INTEGER  

mpLecSvBusCallType 1.3.6.1.4.1.119.2.3.3.13.19.3.1.13
Indicates the type of the connection between this LEC and the BUS. If it is set to '1', the type is SVC specified by the address resolution function. If it is set to '2' the type is PVC for VPI/VCI registration.
OBJECT-TYPE    
  INTEGER dynamicSvc(1), pvc(2)  

mpLecSvMcastSendVccInterface 1.3.6.1.4.1.119.2.3.3.13.19.3.1.14
Indicates the ATM interface number on which the Multicast Send VCC is set.
OBJECT-TYPE    
  INTEGER  

mpLecSvMcastSendVpi 1.3.6.1.4.1.119.2.3.3.13.19.3.1.15
Indicates the VPI of the Multicast Send VCC.
OBJECT-TYPE    
  INTEGER  

mpLecSvMcastSendVci 1.3.6.1.4.1.119.2.3.3.13.19.3.1.16
Indicates the VCI of the Multicast Send VCC.
OBJECT-TYPE    
  INTEGER  

mpLecSvMcastSendSendTrafficId 1.3.6.1.4.1.119.2.3.3.13.19.3.1.17
Indicates the send traffic ID of the Multicast Send VCC.
OBJECT-TYPE    
  INTEGER  

mpLecSvMcastForwardVccInterface 1.3.6.1.4.1.119.2.3.3.13.19.3.1.18
Indicates the ATM interface number on which the Multicast Forward VCC is set.
OBJECT-TYPE    
  INTEGER  

mpLecSvMcastForwardVpi 1.3.6.1.4.1.119.2.3.3.13.19.3.1.19
Indicates the VPI of the Multicast Forward VCC.
OBJECT-TYPE    
  INTEGER  

mpLecSvMcastForwardVci 1.3.6.1.4.1.119.2.3.3.13.19.3.1.20
Indicates the VCI of the Multicast Forward VCC.
OBJECT-TYPE    
  INTEGER  

mpLecSvMcastForwardSendTrafficId 1.3.6.1.4.1.119.2.3.3.13.19.3.1.21
Indicates the send traffic ID of the Multicast Forward VCC.
OBJECT-TYPE    
  INTEGER  

mpLecSvCtrlDirectRcvTrafficId 1.3.6.1.4.1.119.2.3.3.13.19.3.1.22
Indicates the shaper receive traffic ID of the Control Direct VCC.
OBJECT-TYPE    
  INTEGER  

mpLecSvCtrlDistributeRcvTrafficId 1.3.6.1.4.1.119.2.3.3.13.19.3.1.23
Indicates the receive traffic ID of the Control Distribute VCC.
OBJECT-TYPE    
  INTEGER  

mpLecSvMcastSendRcvTrafficId 1.3.6.1.4.1.119.2.3.3.13.19.3.1.24
Indicates the receive traffic ID of the Multicast Send VCC.
OBJECT-TYPE    
  INTEGER  

mpLecSvMcastForwardRcvTrafficId 1.3.6.1.4.1.119.2.3.3.13.19.3.1.25
Indicates the receive traffic ID of the Multicast Forward VCC.
OBJECT-TYPE    
  INTEGER  

mpLeArpTable 1.3.6.1.4.1.119.2.3.3.13.19.4
Indicates the table of the LE-ARP information.
OBJECT-TYPE    
  SEQUENCE OF  
    MpLeArpEntry

mpLeArpEntry 1.3.6.1.4.1.119.2.3.3.13.19.4.1
Indicates the entry of the LE-ARP information. The LE-ARP address information is registered by the following procedure ; 1) The NW manager creates LE-ARP table entry in mpLeArpTable, by setting 'createAndWait(5)' to LeArpRowStatus. 2) The NW manager sets the appropriate values to the objects contained in mpLeArpTable. 3) The NW manager activates the LE-ARP table entry, by setting 'active(1)' to LeArpRowStatus. The LE-ARP address information is deleted by the following procedure ; 1) The NW manager inactivates the LE-ARP table entry, by setting 'notInService(2)' to LeArpRowStatus. 2) The LE-ARP table entry is deleted, by setting 'destroy(6)' to LeArpRowStatus.
OBJECT-TYPE    
  MpLeArpEntry  

mpLeArpLecIndex 1.3.6.1.4.1.119.2.3.3.13.19.4.1.1
Indicates the 'lecIndex' of this client.
OBJECT-TYPE    
  INTEGER  

mpLeArpMacAddress 1.3.6.1.4.1.119.2.3.3.13.19.4.1.2
The MAC address for which this cache entry provides a translation.
OBJECT-TYPE    
  MacAddress  

mpLeArpCallType 1.3.6.1.4.1.119.2.3.3.13.19.4.1.3
Indicates the virtual circuit connection type of the LE-ARP entry. If it is set to '1', it is SVC connection. If it is set to '2', it is PVC connection. It is used to set the connection type when an entry is added to the object 'mpLeArpTable'.
OBJECT-TYPE    
  INTEGER svc(1), pvc(2)  

mpLeArpInterface 1.3.6.1.4.1.119.2.3.3.13.19.4.1.4
Indicates the ATM interface number of this LE-ARP entry. In case of PVC connection, this object is used to set and confirm the ATM interface number which is used. In case of SVC connection, it is used to display the ATM interface number which is currently used, but it cannot be used to set.
OBJECT-TYPE    
  INTEGER  

mpLeArpVpi 1.3.6.1.4.1.119.2.3.3.13.19.4.1.5
Indicates the VPI value of this LE-ARP entry. In case of PVC connection, this object is used to set and confirm the VPI value which is used. In case of SVC connection, it is used to display the VPI value which is currently used, but it cannot be used to set.
OBJECT-TYPE    
  INTEGER  

mpLeArpVci 1.3.6.1.4.1.119.2.3.3.13.19.4.1.6
Indicates the VCI value of this LE-ARP entry. In case of PVC connection, this object is used to set and confirm the VCI value which is used. In case of SVC connection, it is used to display the VCI value which is currently used, but it cannot be used to set.
OBJECT-TYPE    
  INTEGER  

mpLeArpSendTrafficId 1.3.6.1.4.1.119.2.3.3.13.19.4.1.7
Indicates the send traffic ID which is used by the LE-ARP entry. In case of PVC connection, this object is used to set and confirm the used traffic ID. In case of SVC connection, it is used to display the used traffic ID, but it cannot be used to set.
OBJECT-TYPE    
  INTEGER  

mpLeArpRcvTrafficId 1.3.6.1.4.1.119.2.3.3.13.19.4.1.8
Indicates the receive traffic ID which is used by the LE-ARP entry. In case of PVC connection, this object is used to set and confirm the used traffic ID. In case of SVC connection, it is used to display the used traffic ID, but it cannot be used to set.
OBJECT-TYPE    
  INTEGER  

mpLecStatisticsTable 1.3.6.1.4.1.119.2.3.3.13.19.5
Indicates the table of the LEC statistics information.
OBJECT-TYPE    
  SEQUENCE OF  
    MpLecStatisticsEntry

mpLecStatisticsEntry 1.3.6.1.4.1.119.2.3.3.13.19.5.1
Indicates the entry of statistics information counters.
OBJECT-TYPE    
  MpLecStatisticsEntry  

mpLecStatIndex 1.3.6.1.4.1.119.2.3.3.13.19.5.1.1
Indicates the lecindex to identify the LEC which corresponds to this entry.
OBJECT-TYPE    
  INTEGER  

mpLecStatVcSetupSndCounts 1.3.6.1.4.1.119.2.3.3.13.19.5.1.2
Indicates the number of the call set-up done by the LAN Emulation function.
OBJECT-TYPE    
  Counter  

mpLecStatVcSetupRcvCounts 1.3.6.1.4.1.119.2.3.3.13.19.5.1.3
Indicates the number of the incoming call received by the LAN Emulation function.
OBJECT-TYPE    
  Counter  

mpLecStatVcReleaseSndCounts 1.3.6.1.4.1.119.2.3.3.13.19.5.1.4
Indicates the number of the call cleared by itself, by LAN Emulation function.
OBJECT-TYPE    
  Counter  

mpLecStatVcReleaseRcvCounts 1.3.6.1.4.1.119.2.3.3.13.19.5.1.5
Indicates the number of the call cleared by the destination entity, by LAN Emulation function.
OBJECT-TYPE    
  Counter  

mpLecStatInContFrameFailures 1.3.6.1.4.1.119.2.3.3.13.19.5.1.6
Indicates the number of the discarded control frames received.
OBJECT-TYPE    
  Counter  

mpLecStatInDataFrameFailures 1.3.6.1.4.1.119.2.3.3.13.19.5.1.7
Indicates the number of discarded data frames received.
OBJECT-TYPE    
  Counter  

mpLecStatInNarpRequests 1.3.6.1.4.1.119.2.3.3.13.19.5.1.8
Indicates the number of the received LENARP REQUEST frames.
OBJECT-TYPE    
  Counter  

mpLecStatInTopologyRequests 1.3.6.1.4.1.119.2.3.3.13.19.5.1.9
Indicates the number of the received LE-TOPOLOGY-REQUEST frames.
OBJECT-TYPE    
  Counter  

mpLecStatInBusUcastFrames 1.3.6.1.4.1.119.2.3.3.13.19.5.1.10
Indicates the number of the unknown unicast frames received from the BUS.
OBJECT-TYPE    
  Counter  

mpLecStatInBusMcastFrames 1.3.6.1.4.1.119.2.3.3.13.19.5.1.11
Indicates the number of the multicast frames received from the BUS.
OBJECT-TYPE    
  Counter  

mpLecStatInBusBcastFrames 1.3.6.1.4.1.119.2.3.3.13.19.5.1.12
Indicates the number of the broadcast frames received from the BUS.
OBJECT-TYPE    
  Counter  

mpLecStatOutContFrameFailures 1.3.6.1.4.1.119.2.3.3.13.19.5.1.13
Indicates the number of the discarded control frames to be sent.
OBJECT-TYPE    
  Counter  

mpLecStatOutDataFrameFailures 1.3.6.1.4.1.119.2.3.3.13.19.5.1.14
Indicates the number of the discarded data frames to be sent.
OBJECT-TYPE    
  Counter  

mpLecStatOutNarpRequests 1.3.6.1.4.1.119.2.3.3.13.19.5.1.15
Indicates the number of the LE-N&RP- REQUEST frames sent.
OBJECT-TYPE    
  Counter  

mpLecStatOutTopologyRequests 1.3.6.1.4.1.119.2.3.3.13.19.5.1.16
Indicates the number of the LE TOPOLOGY@ REQUEST frames sent.
OBJECT-TYPE    
  Counter  

mpLecStatOutBusUcastFrames 1.3.6.1.4.1.119.2.3.3.13.19.5.1.17
Indicates the number of the unknown unicast frames sent to the BUS.
OBJECT-TYPE    
  Counter  

mpLecStatOutBusMcastFrames 1.3.6.1.4.1.119.2.3.3.13.19.5.1.18
Indicates the number of the multicast frames sent to the BUS.
OBJECT-TYPE    
  Counter  

mpLecStatOutBusBcastFrames 1.3.6.1.4.1.119.2.3.3.13.19.5.1.19
Indicates the number of the broadcast frames sent to the BUS.
OBJECT-TYPE    
  Counter  

mpLecStatEchoControlFrames 1.3.6.1.4.1.119.2.3.3.13.19.5.1.20
Indicates the number of the echo frames of control frame. The echo frame is that Lec ID of received control frame is self Lec ID
OBJECT-TYPE    
  Counter  

mpLecStatInNoIDEntryDataFrames 1.3.6.1.4.1.119.2.3.3.13.19.5.1.21
Indicates the number of received data frames without being switched by IPFE.
OBJECT-TYPE    
  Counter  

mpLecStatOutNoIDEntryDataFrames 1.3.6.1.4.1.119.2.3.3.13.19.5.1.22
Indicates the number of sent data frames without being switched by IPFE.
OBJECT-TYPE    
  Counter  

mpLecElanTotalCount 1.3.6.1.4.1.119.2.3.3.13.19.6
Indicates the number of Emulated LAN (ELAN) currently configured.
OBJECT-TYPE    
  INTEGER  

mpLecSysMaxVcConnect 1.3.6.1.4.1.119.2.3.3.13.19.7
Indicates the number of the virtual circuits which are possible to be set simultaneously, used by LEC function. It is the total number of PVCs and SVCs which is possible to be set simultaneously.
OBJECT-TYPE    
  INTEGER  

mpMpc 1.3.6.1.4.1.119.2.3.3.13.20
OBJECT IDENTIFIER    

mpMpcCfgTable 1.3.6.1.4.1.119.2.3.3.13.20.1
Indicates the configuration table of the MPC information.
OBJECT-TYPE    
  SEQUENCE OF  
    MpMpcCfgEntry

mpMpcCfgEntry 1.3.6.1.4.1.119.2.3.3.13.20.1.1
Indicates the configuration entry of the MPC information.
OBJECT-TYPE    
  MpMpcCfgEntry  

mpMpcCfgIndex 1.3.6.1.4.1.119.2.3.3.13.20.1.1.1
Indicates the index of the MPC which corresponds to this entry.
OBJECT-TYPE    
  INTEGER  

mpMpcOperatStatus 1.3.6.1.4.1.119.2.3.3.13.20.1.1.2
Indicates the operation status of MPC. It indicates whether MPC is actually active or not.
OBJECT-TYPE    
  INTEGER  

mpMpcSndTrafficId 1.3.6.1.4.1.119.2.3.3.13.20.1.1.3
Indicate the traffic ID which is specified when MPC connects VC.
OBJECT-TYPE    
  INTEGER  

mpMpcRcvTrafficId 1.3.6.1.4.1.119.2.3.3.13.20.1.1.4
Indicate the traffic ID which is specified when MPC connects VC.
OBJECT-TYPE    
  INTEGER  

mpMpcPrtNum 1.3.6.1.4.1.119.2.3.3.13.20.1.1.5
This object assigns a number of ATM port which is used when the MPC is connected.
OBJECT-TYPE    
  INTEGER  

mpMpcMaxMps 1.3.6.1.4.1.119.2.3.3.13.20.1.1.6
Indicate the maximum number of MPSs which can be recognized by MPC. MPC is created so as to recognize MPS up to the value set by this object.
OBJECT-TYPE    
  INTEGER  

mpMpcMaxCache 1.3.6.1.4.1.119.2.3.3.13.20.1.1.7
Indicate the maximum number of cache entry which can be recognized by MPC. MPC is created so as to have cache up to the value set by this object. Both Ingress cache and Egress cache are set.
OBJECT-TYPE    
  INTEGER  

mpMpcCacheCntTable 1.3.6.1.4.1.119.2.3.3.13.20.2
Indicates the MPoA Client cache table which includes used number of MPC cache managed by agent.
OBJECT-TYPE    
  SEQUENCE OF  
    MpMpcCacheCntEntry

mpMpcCacheCntEntry 1.3.6.1.4.1.119.2.3.3.13.20.2.1
Indicates the MPoA Client cache entry which includes used number of MPC cache managed by agent.
OBJECT-TYPE    
  MpMpcCacheCntEntry  

mpMpcCacheCntIndex 1.3.6.1.4.1.119.2.3.3.13.20.2.1.1
Indicates the index of the MPC which corresponds to this entry.
OBJECT-TYPE    
  INTEGER  

mpMpcIngressCacheCnt 1.3.6.1.4.1.119.2.3.3.13.20.2.1.2
Indicates the number of Ingress cache which is being used by MPC. This object is used to know the use for the value set by mpMpcMaxCache.
OBJECT-TYPE    
  INTEGER  

mpMpcEgressCacheCnt 1.3.6.1.4.1.119.2.3.3.13.20.2.1.3
Indicates the number of Egress cache which is being used by MPC. This object is used to know the use for the value set by mpMpcMaxCache.
OBJECT-TYPE    
  INTEGER  

mpMpcMaxReqSelNum 1.3.6.1.4.1.119.2.3.3.13.20.3
Indicates the number of SELs which can be used by all MPC managed by this agent and which are used for capsuling IP.
OBJECT-TYPE    
  INTEGER  

mpMpcUseSelNum 1.3.6.1.4.1.119.2.3.3.13.20.4
Indicates the number of SELs which is being used by all MPC managed by this agent and which are used for capsuling IP.
OBJECT-TYPE    
  INTEGER  

mpStp 1.3.6.1.4.1.119.2.3.3.13.21
OBJECT IDENTIFIER    

mpStpVlanTable 1.3.6.1.4.1.119.2.3.3.13.21.1
A table that contains information for the Spanning Tree Protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    MpStpVlanEntry

mpStpVlanEntry 1.3.6.1.4.1.119.2.3.3.13.21.1.1
A list of information about the Spanning Tree Protocol.
OBJECT-TYPE    
  MpStpVlanEntry  

mpStpVlanIndex 1.3.6.1.4.1.119.2.3.3.13.21.1.1.1
Indicates the index value to identify this table entry.
OBJECT-TYPE    
  INTEGER  

mpStpVlanProtocolSpecification 1.3.6.1.4.1.119.2.3.3.13.21.1.1.2
An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If future versions of the IEEE Spanning Tree Protocol are released that are incompatible with the current version a new value will be defined.
OBJECT-TYPE    
  INTEGER unknown(1), decLb100(2), ieee8021d(3)  

mpStpVlanPriority 1.3.6.1.4.1.119.2.3.3.13.21.1.1.3
The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress.
OBJECT-TYPE    
  INTEGER 0..65535  

mpStpVlanTimeSinceTopologyChange 1.3.6.1.4.1.119.2.3.3.13.21.1.1.4
The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
OBJECT-TYPE    
  TimeTicks  

mpStpVlanTopChanges 1.3.6.1.4.1.119.2.3.3.13.21.1.1.5
The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
OBJECT-TYPE    
  Counter  

mpStpVlanDesignatedRoot 1.3.6.1.4.1.119.2.3.3.13.21.1.1.6
The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
OBJECT-TYPE    
  BridgeId  

mpStpVlanRootCost 1.3.6.1.4.1.119.2.3.3.13.21.1.1.7
The cost of the path to the root as seen from this bridge.
OBJECT-TYPE    
  INTEGER  

mpStpVlanRootPort 1.3.6.1.4.1.119.2.3.3.13.21.1.1.8
The port number of the port which offers the lowest cost path from this bridge to the root bridge.
OBJECT-TYPE    
  INTEGER  

mpStpVlanMaxAge 1.3.6.1.4.1.119.2.3.3.13.21.1.1.9
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
OBJECT-TYPE    
  Timeout  

mpStpVlanHelloTime 1.3.6.1.4.1.119.2.3.3.13.21.1.1.10
The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
OBJECT-TYPE    
  Timeout  

mpStpVlanHoldTime 1.3.6.1.4.1.119.2.3.3.13.21.1.1.11
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
OBJECT-TYPE    
  INTEGER  

mpStpVlanForwardDelay 1.3.6.1.4.1.119.2.3.3.13.21.1.1.12
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to mpStpVlanBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.
OBJECT-TYPE    
  Timeout  

mpStpVlanBridgeMaxAge 1.3.6.1.4.1.119.2.3.3.13.21.1.1.13
The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of mpStpVlanBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
OBJECT-TYPE    
  Timeout 600..4000  

mpStpVlanBridgeHelloTime 1.3.6.1.4.1.119.2.3.3.13.21.1.1.14
The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
OBJECT-TYPE    
  Timeout 100..1000  

mpStpVlanBridgeForwardDelay 1.3.6.1.4.1.119.2.3.3.13.21.1.1.15
The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of mpStpVlanBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number.
OBJECT-TYPE    
  Timeout 400..3000  

mpStpVlanSupportStatus 1.3.6.1.4.1.119.2.3.3.13.21.1.1.16
Indicate whether the VLAN supports Spanning Tree Protocol or not. If the value 'support(1)' is set, the VLAN supports Spanning Tree Protocol. If the value 'nonSupport(2)' is set, the VLAN does not support Spanning Tree Protocol.
OBJECT-TYPE    
  INTEGER support(1), nonSupport(2)  

mpStpPortTable 1.3.6.1.4.1.119.2.3.3.13.21.2
A table that contains port-specific information for the Spanning Tree Protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    MpStpPortEntry

mpStpPortEntry 1.3.6.1.4.1.119.2.3.3.13.21.2.1
A list of information maintained by every port about the Spanning Tree Protocol state for that port.
OBJECT-TYPE    
  MpStpPortEntry  

mpStpPortVlanIndex 1.3.6.1.4.1.119.2.3.3.13.21.2.1.1
The VLAN ID for which this entry contains Spanning Tree Protocol management information.
OBJECT-TYPE    
  INTEGER  

mpStpPort 1.3.6.1.4.1.119.2.3.3.13.21.2.1.2
The port number of the port for which this entry contains Spanning Tree Protocol management information.
OBJECT-TYPE    
  INTEGER  

mpStpPortPriority 1.3.6.1.4.1.119.2.3.3.13.21.2.1.3
The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of mpStpPort.
OBJECT-TYPE    
  INTEGER 0..255  

mpStpPortState 1.3.6.1.4.1.119.2.3.3.13.21.2.1.4
The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see mpStpPortEnable), this object will have a value of disabled(1).
OBJECT-TYPE    
  INTEGER disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6)  

mpStpPortEnable 1.3.6.1.4.1.119.2.3.3.13.21.2.1.5
The enabled/disabled status of the port.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpStpPortPathCost 1.3.6.1.4.1.119.2.3.3.13.21.2.1.6
The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN.
OBJECT-TYPE    
  INTEGER 1..65535  

mpStpPortDesignatedRoot 1.3.6.1.4.1.119.2.3.3.13.21.2.1.7
The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
OBJECT-TYPE    
  BridgeId  

mpStpPortDesignatedCost 1.3.6.1.4.1.119.2.3.3.13.21.2.1.8
The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
OBJECT-TYPE    
  INTEGER  

mpStpPortDesignatedBridge 1.3.6.1.4.1.119.2.3.3.13.21.2.1.9
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
OBJECT-TYPE    
  BridgeId  

mpStpPortDesignatedPort 1.3.6.1.4.1.119.2.3.3.13.21.2.1.10
The Port Identifier of the port on the Designated Bridge for this port's segment.
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

mpStpPortForwardTransitions 1.3.6.1.4.1.119.2.3.3.13.21.2.1.11
The number of times this port has transitioned from the Learning state to the Forwarding state.
OBJECT-TYPE    
  Counter  

mpLlc 1.3.6.1.4.1.119.2.3.3.13.22
OBJECT IDENTIFIER    

mpLlcSharedVccMaxSduSize 1.3.6.1.4.1.119.2.3.3.13.22.1
Indicates Maximum SDU size for common VCC which is managed by LLC. LLC make a common VCC according to Maximum SDU size set by this MIB object.
OBJECT-TYPE    
  INTEGER 1..65535  

mpLlcAgeOutTime 1.3.6.1.4.1.119.2.3.3.13.22.2
Indicates no communication time which is used to judge age out on LLC/SNAP capsulation VCC aging. The VCC is released when no communication time of sending/receiving data reach this value.
OBJECT-TYPE    
  INTEGER 1..4294967295  

mpLlcPvcTable 1.3.6.1.4.1.119.2.3.3.13.22.3
A table contains information of a PVC.
OBJECT-TYPE    
  SEQUENCE OF  
    MpLlcPvcEntry

mpLlcPvcEntry 1.3.6.1.4.1.119.2.3.3.13.22.3.1
A entry indicates a member of PVC information on a ATM interface.
OBJECT-TYPE    
  MpLlcPvcEntry  

mpLlcPvcIdIndex 1.3.6.1.4.1.119.2.3.3.13.22.3.1.1
The value of this object is an index of PVC entry table. The index indicates the Virtual Circuit Identifier (VC ID).
OBJECT-TYPE    
  INTEGER 1..2147483647  

mpLlcPvcPort 1.3.6.1.4.1.119.2.3.3.13.22.3.1.2
The value of this object identifies an ATM port number.
OBJECT-TYPE    
  INTEGER  

mpLlcPvcVpi 1.3.6.1.4.1.119.2.3.3.13.22.3.1.3
The value of this object identifies a VPI.
OBJECT-TYPE    
  INTEGER  

mpLlcPvcVci 1.3.6.1.4.1.119.2.3.3.13.22.3.1.4
The vaule of this object identifies a VCI.
OBJECT-TYPE    
  INTEGER  

mpLlcPvcSdu 1.3.6.1.4.1.119.2.3.3.13.22.3.1.5
The value of this object identifies a Service Data Unit.
OBJECT-TYPE    
  INTEGER 1..65535  

mpLlcPvcVcPriority 1.3.6.1.4.1.119.2.3.3.13.22.3.1.6
The object indicates a priority on a specified VC when VC is not one in a PVC.
OBJECT-TYPE    
  INTEGER  

mpLlcPvcForwardTrafficId 1.3.6.1.4.1.119.2.3.3.13.22.3.1.7
The value of this object identifies a traffic-id for outgoing at a specified ATM port.
OBJECT-TYPE    
  INTEGER  

mpLlcPvcBackwardTrafficId 1.3.6.1.4.1.119.2.3.3.13.22.3.1.8
The vaule of this object identifies a traffic-id for incoming at a specified ATM port.
OBJECT-TYPE    
  INTEGER  

mpLlcPvcAdminStatus 1.3.6.1.4.1.119.2.3.3.13.22.3.1.9
The value of this object indicates status of a VC.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mpLlcPvcOperStatus 1.3.6.1.4.1.119.2.3.3.13.22.3.1.10
The object indicates the current operational status of a VC.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mpLlcPvcRowStatus 1.3.6.1.4.1.119.2.3.3.13.22.3.1.11
This object is used to create, delete or modify a row in this table.
OBJECT-TYPE    
  RowStatus  

mpOspf 1.3.6.1.4.1.119.2.3.3.13.23
OBJECT IDENTIFIER    

mpOspfGeneral 1.3.6.1.4.1.119.2.3.3.13.23.1
OBJECT IDENTIFIER    

mpOspfVersionNumber 1.3.6.1.4.1.119.2.3.3.13.23.1.1
The current version number of the OSPF proto- col is 2.
OBJECT-TYPE    
  INTEGER  

mpOspfTOSSupport 1.3.6.1.4.1.119.2.3.3.13.23.1.2
The router's support for type-of-service rout- ing.
OBJECT-TYPE    
  TruthValue  

mpOspfExtLsdbLimit 1.3.6.1.4.1.119.2.3.3.13.23.1.3
The maximum number of non-default AS- external-LSAs entries that can be stored in the link-state database. If the value is -1, then there is no limit. When the number of non-default AS-external-LSAs in a router's link-state database reaches ospfExtLsdbLimit, the router enters Overflow- State. The router never holds more than ospfExtLsdbLimit non-default AS-external-LSAs in its database. OspfExtLsdbLimit MUST be set identically in all routers attached to the OSPF backbone and/or any regular OSPF area. (i.e., OSPF stub areas and NSSAs are excluded).
OBJECT-TYPE    
  INTEGER  

mpOspfExitOverflowInterval 1.3.6.1.4.1.119.2.3.3.13.23.1.4
The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the router to again originate non-default AS-external-LSAs. When set to 0, the router will not leave Overflow- State until restarted.
OBJECT-TYPE    
  INTEGER  

mpOspfInReceives 1.3.6.1.4.1.119.2.3.3.13.23.1.5
The total number of received error packets.
OBJECT-TYPE    
  Counter  

mpOspfInErrors 1.3.6.1.4.1.119.2.3.3.13.23.1.6
The number of received error packets.
OBJECT-TYPE    
  Counter  

mpOspfGlobalTable 1.3.6.1.4.1.119.2.3.3.13.23.2
Information describing the configured parame- ters and cumulative statistics of the router's OSPF process.
OBJECT-TYPE    
  SEQUENCE OF  
    MpOspfGlobalEntry

mpOspfGlobalEntry 1.3.6.1.4.1.119.2.3.3.13.23.2.1
Information describing the configured parame- ters and cumulative statistics of the router's OSPF process.
OBJECT-TYPE    
  MpOspfGlobalEntry  

mpOspfGlobalProcessId 1.3.6.1.4.1.119.2.3.3.13.23.2.1.1
The process ID of OSPF.
OBJECT-TYPE    
  INTEGER  

mpOspfGlobalMode 1.3.6.1.4.1.119.2.3.3.13.23.2.1.2
Status of OSPF process.
OBJECT-TYPE    
  INTEGER disable(1), enable(2), change(3), cancel(4), active(5)  

mpOspfGlobalRouterId 1.3.6.1.4.1.119.2.3.3.13.23.2.1.3
A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses.
OBJECT-TYPE    
  IpAddress  

mpOspfGlobalAreaBdrRtrStatus 1.3.6.1.4.1.119.2.3.3.13.23.2.1.4
A flag to note whether this router is an area border router.
OBJECT-TYPE    
  TruthValue  

mpOspfGlobalASBdrRtrStatus 1.3.6.1.4.1.119.2.3.3.13.23.2.1.5
A flag to note whether this router is config- ured as an Autonomous System border router.
OBJECT-TYPE    
  TruthValue  

mpOspfGlobalRFC1583Compatibility 1.3.6.1.4.1.119.2.3.3.13.23.2.1.6
Indicates the whether calculation of AS external route is done with RFC1583 mode or RFC2328 mode.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mpOspfGlobalDefaultRouteType 1.3.6.1.4.1.119.2.3.3.13.23.2.1.7
Indeicates the timing to advertise default route.
OBJECT-TYPE    
  INTEGER no(1), always(2), import-list(3)  

mpOspfGlobalDefMetric 1.3.6.1.4.1.119.2.3.3.13.23.2.1.8
The external cost of default route to be used when the advertising timing of default route is 'always'.
OBJECT-TYPE    
  INTEGER 1..16777215  

mpOspfGlobalDefExternalType 1.3.6.1.4.1.119.2.3.3.13.23.2.1.9
The external type of default route to be used when the advertising timing of default route is 'always'.
OBJECT-TYPE    
  INTEGER type1(1), type2(2)  

mpOspfGlobalDefAddress 1.3.6.1.4.1.119.2.3.3.13.23.2.1.10
The forwarding address of default route to be used when the advertising timing of default route is 'always'.
OBJECT-TYPE    
  IpAddress  

mpOspfGlobalDefTag 1.3.6.1.4.1.119.2.3.3.13.23.2.1.11
The route tag of default route to be used when the advertising timing of default route is 'always'.
OBJECT-TYPE    
  INTEGER 0..4294967295  

mpOspfGlobalDefProtocol 1.3.6.1.4.1.119.2.3.3.13.23.2.1.12
The routing protocol of routing table which judges the condition of import-list When the advertising timing of default route is 'import-list'.
OBJECT-TYPE    
  INTEGER local(2), static(3), rip(8)  

mpOspfGlobalDefImportList 1.3.6.1.4.1.119.2.3.3.13.23.2.1.13
The import-list number which judges the condition of import-list When the advertising timing of default route is 'import-list'.
OBJECT-TYPE    
  INTEGER 1..4294967295  

mpOspfGlobalIntraAreaRoutePriority 1.3.6.1.4.1.119.2.3.3.13.23.2.1.14
The route priority which is used when intra-area route is made in IP routing table.
OBJECT-TYPE    
  INTEGER 1..255  

mpOspfGlobalInterAreaRoutePriority 1.3.6.1.4.1.119.2.3.3.13.23.2.1.15
The route priority which is used when inter-area route is made in IP routing table.
OBJECT-TYPE    
  INTEGER 1..255  

mpOspfGlobalExternalRoutePriority 1.3.6.1.4.1.119.2.3.3.13.23.2.1.16
The route priority which is used when AS external route is made in IP routing table.
OBJECT-TYPE    
  INTEGER 1..255  

mpOspfGlobalMulticastExtensions 1.3.6.1.4.1.119.2.3.3.13.23.2.1.17
A Bit Mask indicating whether the router is forwarding IP multicast (Class D) datagrams based on the algorithms defined in the Multi- cast Extensions to OSPF. Bit 0, if set, indicates that the router can forward IP multicast datagrams in the router's directly attached areas (called intra-area mul- ticast routing). Bit 1, if set, indicates that the router can forward IP multicast datagrams between OSPF areas (called inter-area multicast routing). Bit 2, if set, indicates that the router can forward IP multicast datagrams between Auto- nomous Systems (called inter-AS multicast rout- ing). Only certain combinations of bit settings are allowed, namely: 0 (no multicast forwarding is enabled), 1 (intra-area multicasting only), 3 (intra-area and inter-area multicasting), 5 (intra-area and inter-AS multicasting) and 7 (multicasting everywhere). By default, no mul- ticast forwarding is enabled.
OBJECT-TYPE    
  INTEGER 0..7  

mpOspfGlobalDemandExtensions 1.3.6.1.4.1.119.2.3.3.13.23.2.1.18
The router's support for demand routing.
OBJECT-TYPE    
  TruthValue  

mpOspfGlobalRouterLsaCount 1.3.6.1.4.1.119.2.3.3.13.23.2.1.19
The number of Router (LS type 1) link-state advertisements in the link-state database.
OBJECT-TYPE    
  Gauge  

mpOspfGlobalNetworkLsaCount 1.3.6.1.4.1.119.2.3.3.13.23.2.1.20
The number of Network (LS type 2) link-state advertisements in the link-state database.
OBJECT-TYPE    
  Gauge  

mpOspfGlobalSummaryNetworkLsaCount 1.3.6.1.4.1.119.2.3.3.13.23.2.1.21
The number of Summary Network (LS type 3) link-state advertisements in the link-state database.
OBJECT-TYPE    
  Gauge  

mpOspfGlobalSummaryRouterLsaCount 1.3.6.1.4.1.119.2.3.3.13.23.2.1.22
The number of Summary Router (LS type 4) link-state advertisements in the link-state database.
OBJECT-TYPE    
  Gauge  

mpOspfGlobalExternalLsaCount 1.3.6.1.4.1.119.2.3.3.13.23.2.1.23
The number of external (LS type 5) link-state advertisements in the link-state database.
OBJECT-TYPE    
  Gauge  

mpOspfGlobalExternalLsaCksumSum 1.3.6.1.4.1.119.2.3.3.13.23.2.1.24
The 32-bit unsigned sum of the LS checksums of the external link-state advertisements con- tained in the link-state database. This sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers.
OBJECT-TYPE    
  Gauge  

mpOspfGlobalReceives 1.3.6.1.4.1.119.2.3.3.13.23.2.1.25
The number of received packets.
OBJECT-TYPE    
  Counter  

mpOspfGlobalReceiveBadAuths 1.3.6.1.4.1.119.2.3.3.13.23.2.1.26
The number of received packets which were discarded for authentication error.
OBJECT-TYPE    
  Counter  

mpOspfGlobalReceiveBadPackets 1.3.6.1.4.1.119.2.3.3.13.23.2.1.27
The number of received packets which were discarded except authentication error.
OBJECT-TYPE    
  Counter  

mpOspfGlobalMulticastSends 1.3.6.1.4.1.119.2.3.3.13.23.2.1.28
The number of multicast sent packets.
OBJECT-TYPE    
  Counter  

mpOspfGlobalUnicastSends 1.3.6.1.4.1.119.2.3.3.13.23.2.1.29
The number of unicast sent packets.
OBJECT-TYPE    
  Counter  

mpOspfGlobalSpfRuns 1.3.6.1.4.1.119.2.3.3.13.23.2.1.30
The number of times of the calculation for shortest path tree.
OBJECT-TYPE    
  Counter  

mpOspfGlobalIncSummaryUpdates 1.3.6.1.4.1.119.2.3.3.13.23.2.1.31
The number of summary incremental updates.
OBJECT-TYPE    
  Counter  

mpOspfGlobalIncExternalUpdates 1.3.6.1.4.1.119.2.3.3.13.23.2.1.32
The number of external incremental updates.
OBJECT-TYPE    
  Counter  

mpOspfGlobalLsAgeOutCounts 1.3.6.1.4.1.119.2.3.3.13.23.2.1.33
The number of LSAs which were reached max age.
OBJECT-TYPE    
  Counter  

mpOspfGlobalLsFlushCounts 1.3.6.1.4.1.119.2.3.3.13.23.2.1.34
The number of LSAs which max age were set up and which was removed forcibly.
OBJECT-TYPE    
  Counter  

mpOspfGlobalLsdbAllocs 1.3.6.1.4.1.119.2.3.3.13.23.2.1.35
The number of LSAs which were allocated.
OBJECT-TYPE    
  Counter  

mpOspfGlobalLsdbFrees 1.3.6.1.4.1.119.2.3.3.13.23.2.1.36
The number of LSAs which were released.
OBJECT-TYPE    
  Counter  

mpOspfGlobalBufferAllocFailures 1.3.6.1.4.1.119.2.3.3.13.23.2.1.37
The number of times that it failed to hunt the buffer for the packet transmission.
OBJECT-TYPE    
  Counter  

mpOspfImportListTable 1.3.6.1.4.1.119.2.3.3.13.23.3
The table to import routing information from other routing protocol to the OSPF process.
OBJECT-TYPE    
  SEQUENCE OF  
    MpOspfImportListEntry

mpOspfImportListEntry 1.3.6.1.4.1.119.2.3.3.13.23.3.1
The entry to import routing information from other routing protocol to the OSPF process.
OBJECT-TYPE    
  MpOspfImportListEntry  

mpOspfImportListProcessId 1.3.6.1.4.1.119.2.3.3.13.23.3.1.1
The process ID of OSPF.
OBJECT-TYPE    
  INTEGER  

mpOspfImportListProtocol 1.3.6.1.4.1.119.2.3.3.13.23.3.1.2
The protocol of IP routing table.
OBJECT-TYPE    
  INTEGER local(2), static(3), rip(8)  

mpOspfImportListNumber 1.3.6.1.4.1.119.2.3.3.13.23.3.1.3
The import list number.
OBJECT-TYPE    
  INTEGER  

mpOspfImportListStatus 1.3.6.1.4.1.119.2.3.3.13.23.3.1.4
This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
OBJECT-TYPE    
  RowStatus  

mpOspfNetworkPriorityTable 1.3.6.1.4.1.119.2.3.3.13.23.4
The table to specify route priority for each network at making IP routing table.
OBJECT-TYPE    
  SEQUENCE OF  
    MpOspfNetworkPriorityEntry

mpOspfNetworkPriorityEntry 1.3.6.1.4.1.119.2.3.3.13.23.4.1
The entry to specify route priority for each network at making IP routing table.
OBJECT-TYPE    
  MpOspfNetworkPriorityEntry  

mpOspfNetworkPriorityProcessID 1.3.6.1.4.1.119.2.3.3.13.23.4.1.1
The process ID of OSPF.
OBJECT-TYPE    
  INTEGER  

mpOspfNetworkPriorityAddress 1.3.6.1.4.1.119.2.3.3.13.23.4.1.2
The network address.
OBJECT-TYPE    
  IpAddress  

mpOspfNetworkPriorityMask 1.3.6.1.4.1.119.2.3.3.13.23.4.1.3
The network mask.
OBJECT-TYPE    
  IpAddress  

mpOspfNetworkPriorityValue 1.3.6.1.4.1.119.2.3.3.13.23.4.1.4
The route priority.
OBJECT-TYPE    
  INTEGER 1..255  

mpOspfNetworkPriorityStatus 1.3.6.1.4.1.119.2.3.3.13.23.4.1.5
This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
OBJECT-TYPE    
  RowStatus  

mpOspfAreaTable 1.3.6.1.4.1.119.2.3.3.13.23.5
Information describing the configured parame- ters and cumulative statistics of the router's attached areas.
OBJECT-TYPE    
  SEQUENCE OF  
    MpOspfAreaEntry

mpOspfAreaEntry 1.3.6.1.4.1.119.2.3.3.13.23.5.1
Information describing the configured parame- ters and cumulative statistics of one of the router's attached areas.
OBJECT-TYPE    
  MpOspfAreaEntry  

mpOspfAreaProcessId 1.3.6.1.4.1.119.2.3.3.13.23.5.1.1
The process ID of OSPF.
OBJECT-TYPE    
  INTEGER  

mpOspfAreaId 1.3.6.1.4.1.119.2.3.3.13.23.5.1.2
A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.
OBJECT-TYPE    
  IpAddress  

mpOspfAreaImportAsExternal 1.3.6.1.4.1.119.2.3.3.13.23.5.1.3
The area's support for importing AS external link- state advertisements.
OBJECT-TYPE    
  INTEGER importExternal(1), importNoExternal(2), importNssa(3)  

mpOspfAreaStubMetric 1.3.6.1.4.1.119.2.3.3.13.23.5.1.4
The metric to be set up to default route which advertises to stub area.
OBJECT-TYPE    
  INTEGER 1..65535  

mpOspfAreaSummary 1.3.6.1.4.1.119.2.3.3.13.23.5.1.5
The variable ospfAreaSummary controls the im- port of summary LSAs into stub areas. It has no effect on other areas. If it is noAreaSummary, the router will neither originate nor propagate summary LSAs into the stub area. It will rely entirely on its de- fault route. If it is sendAreaSummary, the router will both summarize and propagate summary LSAs.
OBJECT-TYPE    
  INTEGER noAreaSummary(1), sendAreaSummary(2)  

mpOspfAreaConfigIfCount 1.3.6.1.4.1.119.2.3.3.13.23.5.1.6
The number of the registered interfaces.
OBJECT-TYPE    
  Gauge  

mpOspfAreaActiveIfCount 1.3.6.1.4.1.119.2.3.3.13.23.5.1.7
The number of the interface during operation.
OBJECT-TYPE    
  Gauge  

mpOspfAreaTransitCapability 1.3.6.1.4.1.119.2.3.3.13.23.5.1.8
Indicates whether it is the area which active virtual link exists in.
OBJECT-TYPE    
  TruthValue  

mpOspfAreaTransitNetCount 1.3.6.1.4.1.119.2.3.3.13.23.5.1.9
The number of reachable transit networks.
OBJECT-TYPE    
  Gauge  

mpOspfAreaRtrCount 1.3.6.1.4.1.119.2.3.3.13.23.5.1.10
The number of reachable routers.
OBJECT-TYPE    
  Gauge  

mpOspfAreaBdrRtrCount 1.3.6.1.4.1.119.2.3.3.13.23.5.1.11
The total number of area border routers reach- able within this area. This is initially zero, and is calculated in each SPF Pass.
OBJECT-TYPE    
  Gauge  

mpOspfAreaAsBdrRtrCount 1.3.6.1.4.1.119.2.3.3.13.23.5.1.12
The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass.
OBJECT-TYPE    
  Gauge  

mpOspfAreaLsaCount 1.3.6.1.4.1.119.2.3.3.13.23.5.1.13
The total number of link-state advertisements in this area's link-state database, excluding AS External LSA's.
OBJECT-TYPE    
  Gauge  

mpOspfAreaLsaCksumSum 1.3.6.1.4.1.119.2.3.3.13.23.5.1.14
The 32-bit unsigned sum of the link-state ad- vertisements' LS checksums contained in this area's link-state database. This sum excludes external (LS type 5) link-state advertisements. The sum can be used to determine if there has been a change in a router's link state data- base, and to compare the link-state database of two routers.
OBJECT-TYPE    
  Gauge  

mpOspfAreaStatus 1.3.6.1.4.1.119.2.3.3.13.23.5.1.15
This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
OBJECT-TYPE    
  RowStatus  

mpOspfLsdbTable 1.3.6.1.4.1.119.2.3.3.13.23.6
The OSPF Process's Link State Database.
OBJECT-TYPE    
  SEQUENCE OF  
    MpOspfLsdbEntry

mpOspfLsdbEntry 1.3.6.1.4.1.119.2.3.3.13.23.6.1
A single Link State Advertisement.
OBJECT-TYPE    
  MpOspfLsdbEntry  

mpOspfLsdbProcessId 1.3.6.1.4.1.119.2.3.3.13.23.6.1.1
The process ID of OSPF.
OBJECT-TYPE    
  INTEGER  

mpOspfLsdbAreaId 1.3.6.1.4.1.119.2.3.3.13.23.6.1.2
The 32 bit identifier of the Area from which the LSA was received.
OBJECT-TYPE    
  IpAddress  

mpOspfLsdbType 1.3.6.1.4.1.119.2.3.3.13.23.6.1.3
The type of the link state advertisement. Each link state type has a separate advertise- ment format.
OBJECT-TYPE    
  INTEGER routerLink(1), networkLink(2), summaryLink(3), asSummaryLink(4), asExternalLink(5), multicastLink(6), nssaExternalLink(7)  

mpOspfLsdbLsid 1.3.6.1.4.1.119.2.3.3.13.23.6.1.4
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
OBJECT-TYPE    
  IpAddress  

mpOspfLsdbRouterId 1.3.6.1.4.1.119.2.3.3.13.23.6.1.5
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
OBJECT-TYPE    
  IpAddress  

mpOspfLsdbSequence 1.3.6.1.4.1.119.2.3.3.13.23.6.1.6
The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
OBJECT-TYPE    
  INTEGER  

mpOspfLsdbAge 1.3.6.1.4.1.119.2.3.3.13.23.6.1.7
This field is the age of the link state adver- tisement in seconds.
OBJECT-TYPE    
  INTEGER  

mpOspfLsdbChecksum 1.3.6.1.4.1.119.2.3.3.13.23.6.1.8
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum.
OBJECT-TYPE    
  INTEGER  

mpOspfLsdbAdvertisement 1.3.6.1.4.1.119.2.3.3.13.23.6.1.9
The entire Link State Advertisement, including its header.
OBJECT-TYPE    
  OCTET STRING SIZE(1..65535)  

mpOspfAreaRangeTable 1.3.6.1.4.1.119.2.3.3.13.23.7
A range if IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255
OBJECT-TYPE    
  SEQUENCE OF  
    MpOspfAreaRangeEntry

mpOspfAreaRangeEntry 1.3.6.1.4.1.119.2.3.3.13.23.7.1
A range if IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255
OBJECT-TYPE    
  MpOspfAreaRangeEntry  

mpOspfAreaRangeProcessId 1.3.6.1.4.1.119.2.3.3.13.23.7.1.1
The process ID of OSPF.
OBJECT-TYPE    
  INTEGER  

mpOspfAreaRangeAreaId 1.3.6.1.4.1.119.2.3.3.13.23.7.1.2
The Area the Address Range is to be found within.
OBJECT-TYPE    
  IpAddress  

mpOspfAreaRangeNet 1.3.6.1.4.1.119.2.3.3.13.23.7.1.3
The IP Address of the Net or Subnet indicated by the range.
OBJECT-TYPE    
  IpAddress  

mpOspfAreaRangeMask 1.3.6.1.4.1.119.2.3.3.13.23.7.1.4
The Subnet Mask that pertains to the Net or Subnet.
OBJECT-TYPE    
  IpAddress  

mpOspfAreaRangeEffect 1.3.6.1.4.1.119.2.3.3.13.23.7.1.5
Subnets subsumed by ranges either trigger the advertisement of the indicated summary (adver- tiseMatching), or result in the subnet's not being advertised at all outside the area.
OBJECT-TYPE    
  INTEGER advertiseMatching(1), doNotAdvertiseMatching(2)  

mpOspfAreaRangeStatus 1.3.6.1.4.1.119.2.3.3.13.23.7.1.6
This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
OBJECT-TYPE    
  RowStatus  

mpOspfHostTable 1.3.6.1.4.1.119.2.3.3.13.23.8
The list of Hosts, and their metrics, that the router will advertise as host routes.
OBJECT-TYPE    
  SEQUENCE OF  
    MpOspfHostEntry

mpOspfHostEntry 1.3.6.1.4.1.119.2.3.3.13.23.8.1
A metric to be advertised, for a given type of service, when a given host is reachable.
OBJECT-TYPE    
  MpOspfHostEntry  

mpOspfHostProcessId 1.3.6.1.4.1.119.2.3.3.13.23.8.1.1
The process ID of OSPF.
OBJECT-TYPE    
  INTEGER  

mpOspfHostIpAddress 1.3.6.1.4.1.119.2.3.3.13.23.8.1.2
The IP Address of the Host.
OBJECT-TYPE    
  IpAddress  

mpOspfHostMetric 1.3.6.1.4.1.119.2.3.3.13.23.8.1.3
The Metric to be advertised.
OBJECT-TYPE    
  INTEGER 1..65535  

mpOspfHostStatus 1.3.6.1.4.1.119.2.3.3.13.23.8.1.4
This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
OBJECT-TYPE    
  RowStatus  

mpOspfIfTable 1.3.6.1.4.1.119.2.3.3.13.23.9
The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF.
OBJECT-TYPE    
  SEQUENCE OF  
    MpOspfIfEntry

mpOspfIfEntry 1.3.6.1.4.1.119.2.3.3.13.23.9.1
The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF.
OBJECT-TYPE    
  MpOspfIfEntry  

mpOspfIfProcessId 1.3.6.1.4.1.119.2.3.3.13.23.9.1.1
The process ID of OSPF.
OBJECT-TYPE    
  INTEGER  

mpOspfIfIndex 1.3.6.1.4.1.119.2.3.3.13.23.9.1.2
This object specifies ifIndex of interface.
OBJECT-TYPE    
  INTEGER  

mpOspfIfIpAddress 1.3.6.1.4.1.119.2.3.3.13.23.9.1.3
The IP address of this OSPF interface.
OBJECT-TYPE    
  IpAddress  

mpOspfIfIpMask 1.3.6.1.4.1.119.2.3.3.13.23.9.1.4
The network mask registered in interface.
OBJECT-TYPE    
  IpAddress  

mpOspfIfAreaId 1.3.6.1.4.1.119.2.3.3.13.23.9.1.5
A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.
OBJECT-TYPE    
  IpAddress  

mpOspfIfType 1.3.6.1.4.1.119.2.3.3.13.23.9.1.6
The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broad- cast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25 and similar technologies take the value 'nbma', and links that are definitively point to point take the value 'pointToPoint'.
OBJECT-TYPE    
  INTEGER broadcast(1), nbma(2), pointToPoint(3), pointToMultipoint(5)  

mpOspfIfMetric 1.3.6.1.4.1.119.2.3.3.13.23.9.1.7
The metric of this interface.
OBJECT-TYPE    
  INTEGER 1..65535  

mpOspfIfRtrPriority 1.3.6.1.4.1.119.2.3.3.13.23.9.1.8
The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligi- ble to become the designated router on this particular network. In the event of a tie in this value, routers will use their Router ID as a tie breaker.
OBJECT-TYPE    
  INTEGER 0..255  

mpOspfIfTransitDelay 1.3.6.1.4.1.119.2.3.3.13.23.9.1.9
The estimated number of seconds it takes to transmit a link state update packet over this interface.
OBJECT-TYPE    
  INTEGER 1..3600  

mpOspfIfRetransInterval 1.3.6.1.4.1.119.2.3.3.13.23.9.1.10
The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets.
OBJECT-TYPE    
  INTEGER 1..3600  

mpOspfIfHelloInterval 1.3.6.1.4.1.119.2.3.3.13.23.9.1.11
The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a common network.
OBJECT-TYPE    
  INTEGER 1..65535  

mpOspfIfRtrDeadInterval 1.3.6.1.4.1.119.2.3.3.13.23.9.1.12
The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.
OBJECT-TYPE    
  INTEGER 1..2147483647  

mpOspfIfPollInterval 1.3.6.1.4.1.119.2.3.3.13.23.9.1.13
The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor.
OBJECT-TYPE    
  INTEGER 0..2147483647  

mpOspfIfState 1.3.6.1.4.1.119.2.3.3.13.23.9.1.14
The OSPF Interface State.
OBJECT-TYPE    
  INTEGER down(1), loopback(2), waiting(3), pointToPoint(4), designatedRouter(5), backupDesignatedRouter(6), otherDesignatedRouter(7)  

mpOspfIfDesignatedRouter 1.3.6.1.4.1.119.2.3.3.13.23.9.1.15
The IP Address of the Designated Router.
OBJECT-TYPE    
  IpAddress  

mpOspfIfBackupDesignatedRouter 1.3.6.1.4.1.119.2.3.3.13.23.9.1.16
The IP Address of the Backup Designated Router.
OBJECT-TYPE    
  IpAddress  

mpOspfIfAuthType 1.3.6.1.4.1.119.2.3.3.13.23.9.1.17
The authentication type specified for an in- terface. Additional authentication types may be assigned locally.
OBJECT-TYPE    
  INTEGER  

mpOspfIfAuthKeyId 1.3.6.1.4.1.119.2.3.3.13.23.9.1.18
The Key ID to be used when an authentication type is MD5. The value from 1 to 255 are used for key ID. 'Get' is not allowed for this object. The value 0 will be returned as meaningless value when Get-Request is received for this object.
OBJECT-TYPE    
  INTEGER 0..255  

mpOspfIfAuthKey 1.3.6.1.4.1.119.2.3.3.13.23.9.1.19
The Authentication Key. If the Area's Author- ization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Note that unauthenticated interfaces need no authentication key, and simple password authen- tication cannot use a key of more than 8 oc- tets. Larger keys are useful only with authen- tication mechanisms not specified in this docu- ment. When read, ospfIfAuthKey always returns an Oc- tet String of length zero.
OBJECT-TYPE    
  OCTET STRING SIZE(16)  

mpOspfIfMulticastForwarding 1.3.6.1.4.1.119.2.3.3.13.23.9.1.20
The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link uni- casts. Data link multicasting is not meaning- ful on point to point and NBMA interfaces, and setting ospfMulticastForwarding to 0 effective- ly disables all multicast forwarding.
OBJECT-TYPE    
  INTEGER blocked(1), multicast(2), unicast(3)  

mpOspfIfDemand 1.3.6.1.4.1.119.2.3.3.13.23.9.1.21
Indicates whether Demand OSPF procedures (hel- lo supression to FULL neighbors and setting the DoNotAge flag on proogated LSAs) should be per- formed on this interface.
OBJECT-TYPE    
  TruthValue  

mpOspfIfEvents 1.3.6.1.4.1.119.2.3.3.13.23.9.1.22
The number of times this OSPF interface has changed its state, or an error has occurred.
OBJECT-TYPE    
  Counter  

mpOspfIfNeighbors 1.3.6.1.4.1.119.2.3.3.13.23.9.1.23
The number of Neighbors.
OBJECT-TYPE    
  Gauge  

mpOspfIfAdjacencies 1.3.6.1.4.1.119.2.3.3.13.23.9.1.24
The number of adjacent Neighbors.
OBJECT-TYPE    
  Gauge  

mpOspfIfFullyAdjacencies 1.3.6.1.4.1.119.2.3.3.13.23.9.1.25
The number of fully adjacent Neighbors.
OBJECT-TYPE    
  Gauge  

mpOspfIfLsUpdateFloods 1.3.6.1.4.1.119.2.3.3.13.23.9.1.26
The number of LS-update floods.
OBJECT-TYPE    
  Counter  

mpOspfIfDelayedAckSends 1.3.6.1.4.1.119.2.3.3.13.23.9.1.27
The number of LS-Ack floods.
OBJECT-TYPE    
  Counter  

mpOspfIfStatus 1.3.6.1.4.1.119.2.3.3.13.23.9.1.28
This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
OBJECT-TYPE    
  RowStatus  

mpOspfVirtIfTable 1.3.6.1.4.1.119.2.3.3.13.23.10
Information about this router's virtual inter- faces.
OBJECT-TYPE    
  SEQUENCE OF  
    MpOspfVirtIfEntry

mpOspfVirtIfEntry 1.3.6.1.4.1.119.2.3.3.13.23.10.1
Information about a single Virtual Interface.
OBJECT-TYPE    
  MpOspfVirtIfEntry  

mpOspfVirtIfProcessId 1.3.6.1.4.1.119.2.3.3.13.23.10.1.1
The process ID of OSPF.
OBJECT-TYPE    
  INTEGER  

mpOspfVirtIfId 1.3.6.1.4.1.119.2.3.3.13.23.10.1.2
Identification which is used to distinguish virtual link.
OBJECT-TYPE    
  INTEGER  

mpOspfVirtIfNeighbor 1.3.6.1.4.1.119.2.3.3.13.23.10.1.3
The Router ID of the Virtual Neighbor.
OBJECT-TYPE    
  IpAddress  

mpOspfVirtIfAreaId 1.3.6.1.4.1.119.2.3.3.13.23.10.1.4
The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0
OBJECT-TYPE    
  IpAddress  

mpOspfVirtIfMetric 1.3.6.1.4.1.119.2.3.3.13.23.10.1.5
The metric until end point router.
OBJECT-TYPE    
  INTEGER  

mpOspfVirtIfTransitDelay 1.3.6.1.4.1.119.2.3.3.13.23.10.1.6
The estimated number of seconds it takes to transmit a link- state update packet over this interface.
OBJECT-TYPE    
  INTEGER 1..3600  

mpOspfVirtIfRetransInterval 1.3.6.1.4.1.119.2.3.3.13.23.10.1.7
The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets. This value should be well over the expected round- trip time.
OBJECT-TYPE    
  INTEGER 1..3600  

mpOspfVirtIfHelloInterval 1.3.6.1.4.1.119.2.3.3.13.23.10.1.8
The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor.
OBJECT-TYPE    
  INTEGER 1..65535  

mpOspfVirtIfRtrDeadInterval 1.3.6.1.4.1.119.2.3.3.13.23.10.1.9
The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neigh- bor.
OBJECT-TYPE    
  INTEGER 1..2147483647  

mpOspfVirtIfState 1.3.6.1.4.1.119.2.3.3.13.23.10.1.10
OSPF virtual interface states.
OBJECT-TYPE    
  INTEGER down(1), pointToPoint(4)  

mpOspfVirtIfAuthType 1.3.6.1.4.1.119.2.3.3.13.23.10.1.11
The authentication type specified for a virtu- al interface. Additional authentication types may be assigned locally.
OBJECT-TYPE    
  INTEGER 0..255  

mpOspfVirtIfAuthKeyId 1.3.6.1.4.1.119.2.3.3.13.23.10.1.12
The Key ID to be used when an authentication type is MD5. The value from 1 to 255 are used for key ID. 'Get' is not allowed for this object. The value 0 will be returned as meaningless value when Get-Request is received for this object.
OBJECT-TYPE    
  INTEGER 0..255  

mpOspfVirtIfAuthKey 1.3.6.1.4.1.119.2.3.3.13.23.10.1.13
If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 oc- tets. If Authentication Type is md5, the device will left adjust and zero fill to 16 octets. Note that unauthenticated interfaces need no authentication key, and simple password authen- tication cannot use a key of more than 8 oc- tets. When read, mpOspfVirtIfAuthKey always returns a string of length zero.
OBJECT-TYPE    
  OCTET STRING SIZE(16)  

mpOspfVirtIfEvents 1.3.6.1.4.1.119.2.3.3.13.23.10.1.14
The number of state changes or error events on this Virtual Link.
OBJECT-TYPE    
  Counter  

mpOspfVirtIfNeighbors 1.3.6.1.4.1.119.2.3.3.13.23.10.1.15
The number of neighbors.
OBJECT-TYPE    
  Gauge  

mpOspfVirtIfAdjacencies 1.3.6.1.4.1.119.2.3.3.13.23.10.1.16
The number of adjacent neighbors.
OBJECT-TYPE    
  Gauge  

mpOspfVirtIfFullyAdjacencies 1.3.6.1.4.1.119.2.3.3.13.23.10.1.17
The number of fully adjacent neighbors.
OBJECT-TYPE    
  Gauge  

mpOspfVirtIfLsUpdateFloods 1.3.6.1.4.1.119.2.3.3.13.23.10.1.18
The number of LS-update floods.
OBJECT-TYPE    
  Counter  

mpOspfVirtIfDelayedAckSends 1.3.6.1.4.1.119.2.3.3.13.23.10.1.19
The number of LS-Ack floods.
OBJECT-TYPE    
  Counter  

mpOspfVirtIfStatus 1.3.6.1.4.1.119.2.3.3.13.23.10.1.20
This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
OBJECT-TYPE    
  RowStatus  

mpOspfNbrTable 1.3.6.1.4.1.119.2.3.3.13.23.11
A table of non-virtual neighbor information.
OBJECT-TYPE    
  SEQUENCE OF  
    MpOspfNbrEntry

mpOspfNbrEntry 1.3.6.1.4.1.119.2.3.3.13.23.11.1
The information regarding a single neighbor.
OBJECT-TYPE    
  MpOspfNbrEntry  

mpOspfNbrProcessId 1.3.6.1.4.1.119.2.3.3.13.23.11.1.1
The process ID of OSPF.
OBJECT-TYPE    
  INTEGER  

mpOspfNbrIfIndex 1.3.6.1.4.1.119.2.3.3.13.23.11.1.2
The ifIndex of interface related to the neighbior.
OBJECT-TYPE    
  INTEGER  

mpOspfNbrIpAddress 1.3.6.1.4.1.119.2.3.3.13.23.11.1.3
The IP address this neighbor is using in its IP Source Address. Note that, on addressless links, this will not be 0.0.0.0, but the ad- dress of another of the neighbor's interfaces.
OBJECT-TYPE    
  IpAddress  

mpOspfNbrRtrId 1.3.6.1.4.1.119.2.3.3.13.23.11.1.4
A 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System.
OBJECT-TYPE    
  IpAddress  

mpOspfNbrOptions 1.3.6.1.4.1.119.2.3.3.13.23.11.1.5
A Bit Mask corresponding to the neighbor's op- tions field. Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 1, if set, indicates that the associated area accepts and operates on external informa- tion; if zero, it is a stub area. Bit 2, if set, indicates that the system is ca- pable of routing IP Multicast datagrams; i.e., that it implements the Multicast Extensions to OSPF. Bit 3, if set, indicates that the associated area is an NSSA. These areas are capable of carrying type 7 external advertisements, which are translated into type 5 external advertise- ments at NSSA borders.
OBJECT-TYPE    
  INTEGER  

mpOspfNbrPriority 1.3.6.1.4.1.119.2.3.3.13.23.11.1.6
The priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designated router on this particular network.
OBJECT-TYPE    
  INTEGER 0..255  

mpOspfNbrCost 1.3.6.1.4.1.119.2.3.3.13.23.11.1.7
The metric to the neighbor which is used for Point-to-MultiPoint network.
OBJECT-TYPE    
  INTEGER 1..65535  

mpOspfNbrState 1.3.6.1.4.1.119.2.3.3.13.23.11.1.8
The State of the relationship with this Neighbor.
OBJECT-TYPE    
  INTEGER down(1), attempt(2), init(3), twoWay(4), exchangeStart(5), exchange(6), loading(7), full(8)  

mpOspfNbrPermanence 1.3.6.1.4.1.119.2.3.3.13.23.11.1.9
This variable displays the status of the en- try. 'dynamic' and 'permanent' refer to how the neighbor became known.
OBJECT-TYPE    
  INTEGER dynamic(1), permanent(2)  

mpOspfNbrHelloSuppressed 1.3.6.1.4.1.119.2.3.3.13.23.11.1.10
Indicates whether Hellos are being suppressed to the neighbor.
OBJECT-TYPE    
  TruthValue  

mpOspfNbrSelectedDr 1.3.6.1.4.1.119.2.3.3.13.23.11.1.11
The designated router which neighbor selects.
OBJECT-TYPE    
  IpAddress  

mpOspfNbrSelectedBdr 1.3.6.1.4.1.119.2.3.3.13.23.11.1.12
The backup designated router which neighbor selects.
OBJECT-TYPE    
  IpAddress  

mpOspfNbrLsSummaryListLen 1.3.6.1.4.1.119.2.3.3.13.23.11.1.13
The current length of the LS-summary queue.
OBJECT-TYPE    
  Gauge  

mpOspfNbrLsRetransQLen 1.3.6.1.4.1.119.2.3.3.13.23.11.1.14
The current length of the retransmission queue.
OBJECT-TYPE    
  Gauge  

mpOspfNbrLsReqListLen 1.3.6.1.4.1.119.2.3.3.13.23.11.1.15
The current length of the LS-request queue.
OBJECT-TYPE    
  Gauge  

mpOspfNbrLsUpdateRetrans 1.3.6.1.4.1.119.2.3.3.13.23.11.1.16
The number of times of LS-update re-transmission.
OBJECT-TYPE    
  Counter  

mpOspfNbrDirectAckSends 1.3.6.1.4.1.119.2.3.3.13.23.11.1.17
The number of times of LS-Ack Unicast transmission.
OBJECT-TYPE    
  Counter  

mpOspfNbrDupUpdateReceives 1.3.6.1.4.1.119.2.3.3.13.23.11.1.18
The number of times that overlapped LSA was received.
OBJECT-TYPE    
  Counter  

mpOspfNbrOldUpdateReceives 1.3.6.1.4.1.119.2.3.3.13.23.11.1.19
The number of times that old LSA was received.
OBJECT-TYPE    
  Counter  

mpOspfNbrDupAckReceives 1.3.6.1.4.1.119.2.3.3.13.23.11.1.20
The number of times that overlapped LS-Ack was received.
OBJECT-TYPE    
  Counter  

mpOspfNbrLosses 1.3.6.1.4.1.119.2.3.3.13.23.11.1.21
The number of times that Neighbor down was recognized.
OBJECT-TYPE    
  Counter  

mpOspfNbrAdjacencyResets 1.3.6.1.4.1.119.2.3.3.13.23.11.1.22
The number of times that Adjacency was reset.
OBJECT-TYPE    
  Counter  

mpOspfNbrStatus 1.3.6.1.4.1.119.2.3.3.13.23.11.1.23
This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
OBJECT-TYPE    
  RowStatus  

mpOspfVirtNbrTable 1.3.6.1.4.1.119.2.3.3.13.23.12
A table of virtual neighbor information.
OBJECT-TYPE    
  SEQUENCE OF  
    MpOspfVirtNbrEntry

mpOspfVirtNbrEntry 1.3.6.1.4.1.119.2.3.3.13.23.12.1
Virtual neighbor information.
OBJECT-TYPE    
  MpOspfVirtNbrEntry  

mpOspfVirtNbrProcessId 1.3.6.1.4.1.119.2.3.3.13.23.12.1.1
The process ID of OSPF.
OBJECT-TYPE    
  INTEGER  

mpOspfVirtNbrIfId 1.3.6.1.4.1.119.2.3.3.13.23.12.1.2
The ifIndex of Interface which transmits packet to Neighbor.
OBJECT-TYPE    
  INTEGER  

mpOspfVirtNbrAreaId 1.3.6.1.4.1.119.2.3.3.13.23.12.1.3
The Transit Area Identifier.
OBJECT-TYPE    
  IpAddress  

mpOspfVirtNbrRtrId 1.3.6.1.4.1.119.2.3.3.13.23.12.1.4
A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.
OBJECT-TYPE    
  IpAddress  

mpOspfVirtNbrIpAddress 1.3.6.1.4.1.119.2.3.3.13.23.12.1.5
The IP address this Virtual Neighbor is us- ing.
OBJECT-TYPE    
  IpAddress  

mpOspfVirtNbrOptions 1.3.6.1.4.1.119.2.3.3.13.23.12.1.6
A Bit Mask corresponding to the neighbor's op- tions field. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 2, if set, indicates that the system is Network Multicast capable; ie, that it imple- ments OSPF Multicast Routing.
OBJECT-TYPE    
  INTEGER  

mpOspfVirtNbrState 1.3.6.1.4.1.119.2.3.3.13.23.12.1.7
The state of the Virtual Neighbor Relation- ship.
OBJECT-TYPE    
  INTEGER down(1), attempt(2), init(3), twoWay(4), exchangeStart(5), exchange(6), loading(7), full(8)  

mpOspfVirtNbrHelloSuppressed 1.3.6.1.4.1.119.2.3.3.13.23.12.1.8
Indicates whether Hellos are being suppressed to the neighbor
OBJECT-TYPE    
  TruthValue  

mpOspfVirtNbrLsSummaryListLen 1.3.6.1.4.1.119.2.3.3.13.23.12.1.9
The current length of the LS-summary queue.
OBJECT-TYPE    
  Gauge  

mpOspfVirtNbrLsRetransQLen 1.3.6.1.4.1.119.2.3.3.13.23.12.1.10
The current length of the retransmission queue.
OBJECT-TYPE    
  Gauge  

mpOspfVirtNbrLsReqListLen 1.3.6.1.4.1.119.2.3.3.13.23.12.1.11
The current length of the LS-request queue.
OBJECT-TYPE    
  Gauge  

mpOspfVirtNbrLsUpdateRetrans 1.3.6.1.4.1.119.2.3.3.13.23.12.1.12
The number of times of LS-update re-transmission.
OBJECT-TYPE    
  Counter  

mpOspfVirtNbrDirectAckSends 1.3.6.1.4.1.119.2.3.3.13.23.12.1.13
The number of times of LS-Ack unicast transmission.
OBJECT-TYPE    
  Counter  

mpOspfVirtNbrDupUpdateReceives 1.3.6.1.4.1.119.2.3.3.13.23.12.1.14
The number of times that overlapped LSA was received.
OBJECT-TYPE    
  Counter  

mpOspfVirtNbrOldUpdateReceives 1.3.6.1.4.1.119.2.3.3.13.23.12.1.15
The number of times that old LSA was received.
OBJECT-TYPE    
  Counter  

mpOspfVirtNbrDupAckReceives 1.3.6.1.4.1.119.2.3.3.13.23.12.1.16
The number of times that overlapped LS-Ack was received.
OBJECT-TYPE    
  Counter  

mpOspfVirtNbrLosses 1.3.6.1.4.1.119.2.3.3.13.23.12.1.17
The number of times that Neighbor down was recognized.
OBJECT-TYPE    
  Counter  

mpOspfVirtNbrAdjacencyResets 1.3.6.1.4.1.119.2.3.3.13.23.12.1.18
The number of times that Adjacency was reset.
OBJECT-TYPE    
  Counter  

mpOspfExtLsdbTable 1.3.6.1.4.1.119.2.3.3.13.23.13
The OSPF Process's Links State Database.
OBJECT-TYPE    
  SEQUENCE OF  
    MpOspfExtLsdbEntry

mpOspfExtLsdbEntry 1.3.6.1.4.1.119.2.3.3.13.23.13.1
A single Link State Advertisement.
OBJECT-TYPE    
  MpOspfExtLsdbEntry  

mpOspfExtLsdbProcessId 1.3.6.1.4.1.119.2.3.3.13.23.13.1.1
The process ID of OSPF.
OBJECT-TYPE    
  INTEGER  

mpOspfExtLsdbLsid 1.3.6.1.4.1.119.2.3.3.13.23.13.1.2
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
OBJECT-TYPE    
  IpAddress  

mpOspfExtLsdbRouterId 1.3.6.1.4.1.119.2.3.3.13.23.13.1.3
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
OBJECT-TYPE    
  IpAddress  

mpOspfExtLsdbType 1.3.6.1.4.1.119.2.3.3.13.23.13.1.4
The type of the link state advertisement. Each link state type has a separate advertise- ment format.
OBJECT-TYPE    
  INTEGER asExternalLink(5)  

mpOspfExtLsdbSequence 1.3.6.1.4.1.119.2.3.3.13.23.13.1.5
The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
OBJECT-TYPE    
  INTEGER  

mpOspfExtLsdbAge 1.3.6.1.4.1.119.2.3.3.13.23.13.1.6
This field is the age of the link state adver- tisement in seconds.
OBJECT-TYPE    
  INTEGER  

mpOspfExtLsdbChecksum 1.3.6.1.4.1.119.2.3.3.13.23.13.1.7
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum.
OBJECT-TYPE    
  INTEGER  

mpOspfExtLsdbAdvertisement 1.3.6.1.4.1.119.2.3.3.13.23.13.1.8
The entire Link State Advertisement, including its header.
OBJECT-TYPE    
  OCTET STRING SIZE(36)  

mpObsCtl 1.3.6.1.4.1.119.2.3.3.13.101
OBJECT IDENTIFIER    

mpCardInfo 1.3.6.1.4.1.119.2.3.3.13.102
OBJECT IDENTIFIER    

mpInterface 1.3.6.1.4.1.119.2.3.3.13.103
OBJECT IDENTIFIER    

mpPvoice 1.3.6.1.4.1.119.2.3.3.13.104
OBJECT IDENTIFIER    

mpAtmCallCtl 1.3.6.1.4.1.119.2.3.3.13.110
OBJECT IDENTIFIER    

mpCes 1.3.6.1.4.1.119.2.3.3.13.111
OBJECT IDENTIFIER    

mpIpsw 1.3.6.1.4.1.119.2.3.3.13.112
OBJECT IDENTIFIER    

mpInsCtl 1.3.6.1.4.1.119.2.3.3.13.113
OBJECT IDENTIFIER    

mpFfr 1.3.6.1.4.1.119.2.3.3.13.114
OBJECT IDENTIFIER    

mpIpswAtm 1.3.6.1.4.1.119.2.3.3.13.115
OBJECT IDENTIFIER    

mpPpp 1.3.6.1.4.1.119.2.3.3.13.120
OBJECT IDENTIFIER    

mpPos 1.3.6.1.4.1.119.2.3.3.13.121
OBJECT IDENTIFIER    

mpFrpp 1.3.6.1.4.1.119.2.3.3.13.123
OBJECT IDENTIFIER    

mpMpls 1.3.6.1.4.1.119.2.3.3.13.124
OBJECT IDENTIFIER    

mpMcc 1.3.6.1.4.1.119.2.3.3.13.125
OBJECT IDENTIFIER    

mpDetour 1.3.6.1.4.1.119.2.3.3.13.130
OBJECT IDENTIFIER    

mpIpv6 1.3.6.1.4.1.119.2.3.3.13.131
OBJECT IDENTIFIER    

mpNetwatch 1.3.6.1.4.1.119.2.3.3.13.132
OBJECT IDENTIFIER    

mpNetping 1.3.6.1.4.1.119.2.3.3.13.133
OBJECT IDENTIFIER    

Defined Objects

RowStatus  
INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)    

NetPrefix  
OCTET STRING SIZE(13)    

DisplayString  
OCTET STRING    

BridgeId  
OCTET STRING SIZE(8)    

Timeout  
INTEGER    

DateAndTime  
OCTET STRING SIZE(7 | 8 | 11)    

MacAddress  
OCTET STRING SIZE(6)    

MpSysFanEntry  
SEQUENCE    
  INTEGER as mpSysFanIndex  
  DisplayString as mpSysFanType  
  INTEGER as mpSysFanStatus  

MpSysVoltageEntry  
SEQUENCE    
  INTEGER as mpSysVoltagePackageIndex  
  INTEGER as mpSysVoltageIndex  
  DisplayString as mpSysVoltageType  
  INTEGER as mpSysVoltageReading  
  INTEGER as mpSysVoltageStatus  

MpSysTempEntry  
SEQUENCE    
  INTEGER as mpSysTempPackageIndex  
  DisplayString as mpSysTempType  
  INTEGER as mpSysTempStatus  
  INTEGER as mpSysTempReading  
  INTEGER as mpSysTempMinThresh  
  INTEGER as mpSysTempMaxThresh  

MpSysEqpEntry  
SEQUENCE    
  INTEGER as mpSysEqpIndex  
  DisplayString as mpSysEqpType  
  INTEGER as mpSysEqpStatus  

MpSysCpuUseEntry  
SEQUENCE    
  INTEGER as mpSysCpuUseIndex  
  INTEGER as mpSysCpuTimeIndex  
  DisplayString as mpSysCpuUseType  
  DisplayString as mpSysCpuTimeType  
  INTEGER as mpSysCpuUse  

MpIfCardEntry  
SEQUENCE    
  INTEGER as mpIfCardSlotNumber  
  INTEGER as mpIfCardType  
  DisplayString as mpIfCardOperSide  
  DisplayString as mpIfCardOperVersion  
  DisplayString as mpIfCardSideAVersion  
  DisplayString as mpIfCardSideBVersion  
  DisplayString as mpIfCardBootDpVersion  

MpEtherPortEntry  
SEQUENCE    
  INTEGER as mpEtherPortIfIndex  
  INTEGER as mpEtherPortLoopBackType  
  INTEGER as mpEtherPortMode  

MpEtherPortStatusEntry  
SEQUENCE    
  INTEGER as mpEtherPortStsIfIndex  
  INTEGER as mpEtherPortStsLoopBackResult  
  INTEGER as mpEtherPortStsMode  
  Gauge as mpEtherPortStsSpeed  
  INTEGER as mpEtherPortStsFullDuplex  

MpVlanEntry  
SEQUENCE    
  INTEGER as mpVlanIndex  
  INTEGER as mpVlanRtrIndex  
  DisplayString as mpVlanName  
  INTEGER as mpVlanNameStatus  

MpVlanGroupEntry  
SEQUENCE    
  INTEGER as mpVlanGrpIndex  
  DisplayString as mpVlanGrpName  
  INTEGER as mpVlanGrpNameStatus  

MpVlanBigpipeEntry  
SEQUENCE    
  INTEGER as mpVlanBigpipeIndex  
  DisplayString as mpVlanBigpipeName  
  INTEGER as mpVlanBigpipeNameStatus  
  INTEGER as mpVlanBigpipeMode  

MpVlanIntfEntry  
SEQUENCE    
  INTEGER as mpVlanIntfVlanIndex  
  INTEGER as mpVlanIntfNumber  
  INTEGER as mpVlanIntfStatus  

MpVlanGroupIntfEntry  
SEQUENCE    
  INTEGER as mpVlanGrpIntfIndex  
  INTEGER as mpVlanGrpIntfVlanIndex  
  INTEGER as mpVlanGrpIntfStatus  

MpVlanBigpipeIntfEntry  
SEQUENCE    
  INTEGER as mpVlanBigpipeIntfIndex  
  INTEGER as mpVlanBigpipeIntfNumber  
  INTEGER as mpVlanBigpipeIntfNumberStatus  

MpVlanMacEntry  
SEQUENCE    
  INTEGER as mpVlanMacVlanIndex  
  MacAddress as mpVlanMacAddress  
  INTEGER as mpVlanMacIntfNumber  
  INTEGER as mpVlanMacStatus  

MpVlanBigpipeVidControlEntry  
SEQUENCE    
  INTEGER as mpVlanBigpipeVidControlIndex  
  INTEGER as mpVlanBigpipeVidControlVid  
  INTEGER as mpVlanBigpipeVidControlStatus  

MpVlanTpFdbEntry  
SEQUENCE    
  INTEGER as mpVlanTpFdbVlanIndex  
  MacAddress as mpVlanTpFdbMacAddress  
  INTEGER as mpVlanTpFdbIntfNumber  
  INTEGER as mpVlanTpFdbStatus  

MpVlanTagPpEntry  
SEQUENCE    
  INTEGER as mpVlanTagPpIndex  
  INTEGER as mpVlanTagPpRtrIndex  
  INTEGER as mpVlanTagPpIntfNumber  
  DisplayString as mpVlanTagPpName  
  INTEGER as mpVlanTagPpMacType  
  INTEGER as mpVlanTagPpNameStatus  

MpBrgDestMacFilterEntry  
SEQUENCE    
  INTEGER as mpBrgDestMacFilterVlanIndex  
  MacAddress as mpBrgDestMacFilterAddress  
  INTEGER as mpBrgDestMacFilterStatus  

MpBrgSrcMacFilterEntry  
SEQUENCE    
  INTEGER as mpBrgSrcMacFilterVlanIndex  
  MacAddress as mpBrgSrcMacFilterAddress  
  INTEGER as mpBrgSrcMacFilterStatus  

MpBrgDestPortFilterEntry  
SEQUENCE    
  INTEGER as mpBrgDestPortFilterIfIndex  
  INTEGER as mpBrgDestPortFilterStatus  

MpBrgSrcPortFilterEntry  
SEQUENCE    
  INTEGER as mpBrgSrcPortFilterIfIndex  
  INTEGER as mpBrgSrcPortFilterStatus  

MpEventEntry  
SEQUENCE    
  INTEGER as mpEventIndex  
  INTEGER as mpEventSource  
  INTEGER as mpEventCode  
  DisplayString as mpEventTimeStamp  
  INTEGER as mpEventSeverity  
  DisplayString as mpEventDescription  

MpTrapFilterEntry  
SEQUENCE    
  INTEGER as mpTrapFilterGeneric  
  INTEGER as mpTrapFilterSpecific  
  OBJECT IDENTIFIER as mpTrapFilterEnterprise  
  INTEGER as mpTrapFilterStatus  
  DisplayString as mpTrapFilterName  

MpEventTrapSeverityEntry  
SEQUENCE    
  INTEGER as mpEventTrapSeverityIndex  
  INTEGER as mpEventTrapCode  
  INTEGER as mpEventTrapSeverity  
  DisplayString as mpEventTrapDescription  

MpUiSessionEntry  
SEQUENCE    
  INTEGER as mpUiSessionPort  
  INTEGER as mpUiSessionTime  
  INTEGER as mpUiSessionUserStatus  
  INTEGER as mpUiSessionStatus  

MpDhcpRelayIfEntry  
SEQUENCE    
  INTEGER as mpDhcpRelayIfEntIfIndex  
  INTEGER as mpDhcpRelayIfEntTransMode  
  Counter as mpDhcpRelayIfEntRequests  
  Counter as mpDhcpRelayIfEntReplies  
  Counter as mpDhcpRelayIfEntRequestTransmits  
  Counter as mpDhcpRelayIfEntRequestDiscards  
  Counter as mpDhcpRelayIfEntReplyDiscards  
  INTEGER as mpDhcpRelayIfEntStatus  

MpDhcpRelayAddrEntry  
SEQUENCE    
  INTEGER as mpDhcpRelayAddrEntIfIndex  
  IpAddress as mpDhcpRelayAddrEntAddr  
  INTEGER as mpDhcpRelayAddrEntStatus  

MpIpFilterExcludeEntry  
SEQUENCE    
  INTEGER as mpIpFilterExEntIndex  
  INTEGER as mpIpFilterExEntInIfIndex  
  INTEGER as mpIpFilterExEntOutIfIndex  
  IpAddress as mpIpFilterExEntSrcIpAddr  
  IpAddress as mpIpFilterExEntSrcAddrMask  
  IpAddress as mpIpFilterExEntDestIpAddr  
  IpAddress as mpIpFilterExEntDestAddrMask  
  INTEGER as mpIpFilterExEntIpOptions  
  INTEGER as mpIpFilterExEntIpProcNumber  
  INTEGER as mpIpFilterExEntSrcPort  
  INTEGER as mpIpFilterExEntDestPort  
  INTEGER as mpIpFilterExEntTcpAckOffSegment  
  INTEGER as mpIpFilterExEntIcmpSend  
  INTEGER as mpIpFilterExEntEventLogging  
  RowStatus as mpIpFilterExEntStatus  

MpIpFilterIncludeEntry  
SEQUENCE    
  INTEGER as mpIpFilterInEntIndex  
  INTEGER as mpIpFilterInEntInIfIndex  
  INTEGER as mpIpFilterInEntOutIfIndex  
  IpAddress as mpIpFilterInEntSrcIpAddr  
  IpAddress as mpIpFilterInEntSrcAddrMask  
  IpAddress as mpIpFilterInEntDestIpAddr  
  IpAddress as mpIpFilterInEntDestAddrMask  
  INTEGER as mpIpFilterInEntIpOptions  
  INTEGER as mpIpFilterInEntIpProcNumber  
  INTEGER as mpIpFilterInEntSrcPort  
  INTEGER as mpIpFilterInEntDestPort  
  INTEGER as mpIpFilterInEntTcpAckOffSegment  
  INTEGER as mpIpFilterInEntLifeTime  
  RowStatus as mpIpFilterInEntStatus  

MpIpStaticRouteEntry  
SEQUENCE    
  IpAddress as mpIpStaticRouteDest  
  IpAddress as mpIpStaticRouteMask  
  IpAddress as mpIpStaticRouteNextHop  
  INTEGER as mpIpStaticRouteIfIndex  
  INTEGER as mpIpStaticRouteType  
  INTEGER as mpIpStaticRoutePriority  
  INTEGER as mpIpStaticRouteTag  
  INTEGER as mpIpStaticRouteStatus  

MpIpRoutePriorityEntry  
SEQUENCE    
  INTEGER as mpIpRoutePriorityProtocol  
  INTEGER as mpIpRoutePriorityValue  

MpIpImportListEntry  
SEQUENCE    
  INTEGER as mpIpImportListNumber  
  INTEGER as mpIpImportListAction  
  INTEGER as mpIpImportListConIfIndex  
  IpAddress as mpIpImportListConNetAddr  
  IpAddress as mpIpImportListConNetMask  
  INTEGER as mpIpImportListConNetStatus  
  INTEGER as mpIpImportListConRangeStatus  
  IpAddress as mpIpImportListConNextHop  
  IpAddress as mpIpImportListConSource  
  INTEGER as mpIpImportListConSourceStatus  
  INTEGER as mpIpImportListConMetric  
  INTEGER as mpIpImportListConRouteType  
  INTEGER as mpIpImportListConTag  
  INTEGER as mpIpImportListConTagStatus  
  INTEGER as mpIpImportListConPId  
  IpAddress as mpIpImportListSetNetAddr  
  IpAddress as mpIpImportListSetNetMask  
  INTEGER as mpIpImportListSetNetStatus  
  INTEGER as mpIpImportListSetMetric  
  IpAddress as mpIpImportListSetNextHop  
  INTEGER as mpIpImportListSetTag  
  INTEGER as mpIpImportListSetRouteType  
  INTEGER as mpIpImportListTableStatus  

MpIpVpnEntry  
SEQUENCE    
  INTEGER as mpIpVpnIfIndex  
  INTEGER as mpIpVpnId  

MpIpVpnIpGroupEntry  
SEQUENCE    
  INTEGER as mpIpVpnIpGroupVpnId  
  INTEGER as mpIpVpnIpForwarding  
  INTEGER as mpIpVpnIpDefaultTTL  
  Counter as mpIpVpnIpInReceives  
  Counter as mpIpVpnIpInHdrErrors  
  Counter as mpIpVpnIpInAddrErrors  
  Counter as mpIpVpnIpForwDatagrams  
  Counter as mpIpVpnIpInUnknownProtos  
  Counter as mpIpVpnIpInDiscards  
  Counter as mpIpVpnIpInDelivers  
  Counter as mpIpVpnIpOutRequests  
  Counter as mpIpVpnIpOutDiscards  
  Counter as mpIpVpnIpOutNoRoutes  
  Counter as mpIpVpnIpReasmTimeout  
  Counter as mpIpVpnIpReasmReqds  
  Counter as mpIpVpnIpReasmOKs  
  Counter as mpIpVpnIpReasmFails  
  Counter as mpIpVpnIpFragOKs  
  Counter as mpIpVpnIpFragFails  
  Counter as mpIpVpnIpFragCreates  
  Counter as mpIpVpnIpRoutingDiscards  
  Counter as mpIpVpnIpInFilterDiscards  
  Counter as mpIpVpnIpOutFilterDiscards  
  INTEGER as mpIpVpnIpGroupStatus  

MpIpVpnIpAddrEntry  
SEQUENCE    
  INTEGER as mpIpVpnIpAdEntVpnId  
  INTEGER as mpIpVpnIpAdEntIfIndex  
  IpAddress as mpIpVpnIpAdEntAddr  
  IpAddress as mpIpVpnIpAdEntNetMask  
  INTEGER as mpIpVpnIpAdEntBcastAddr  
  INTEGER as mpIpVpnIpAdEntReasmMaxSize  
  INTEGER as mpIpVpnIpAdEntStatus  
  INTEGER as mpIpVpnIpAdEntEncapType  
  INTEGER as mpIpVpnIpAdEntForwarding  
  INTEGER as mpIpVpnIpAdEntArpTimeOut  
  INTEGER as mpIpVpnIpAdEntIcmpRedirectStatus  
  INTEGER as mpIpVpnIpAdEntIcmpUnreachNetInStatus  
  INTEGER as mpIpVpnIpAdEntIcmpUnreachNetOutStatus  
  INTEGER as mpIpVpnIpAdEntIcmpUnreachHostInStatus  
  INTEGER as mpIpVpnIpAdEntIcmpUnreachHostOutStatus  
  INTEGER as mpIpVpnIpAdEntIcmpUnreachProtInStatus  
  INTEGER as mpIpVpnIpAdEntIcmpUnreachProtOutStatus  
  INTEGER as mpIpVpnIpAdEntIcmpUnreachPortInStatus  
  INTEGER as mpIpVpnIpAdEntIcmpUnreachPortOutStatus  
  INTEGER as mpIpVpnIpAdEntIcmpUnreachFragNeededInStatus  
  INTEGER as mpIpVpnIpAdEntIcmpUnreachFragNeededOutStatus  
  INTEGER as mpIpVpnIpAdEntIcmpUnreachRouteFailInStatus  
  INTEGER as mpIpVpnIpAdEntIcmpUnreachRouteFailOutStatus  
  INTEGER as mpIpVpnIpAdEntIcmpTtlExceedInStatus  
  INTEGER as mpIpVpnIpAdEntIcmpTtlExceedOutStatus  
  INTEGER as mpIpVpnIpAdEntIcmpReassemblyExceedInStatus  
  INTEGER as mpIpVpnIpAdEntIcmpReassemblyExceedOutStatus  
  INTEGER as mpIpVpnIpAdEntIcmpParamProbInStatus  
  INTEGER as mpIpVpnIpAdEntIcmpParamProbOutStatus  
  INTEGER as mpIpVpnIpAdEntProxyArpStatus  
  INTEGER as mpIpVpnIpAdEntDirectedBroadcastStatus  
  INTEGER as mpIpVpnIpAdEntPathThroughListNumber  
  INTEGER as mpIpVpnIpAdEntExtendedStaticRouteListNumber  

MpIpVpnIpCidrEntry  
SEQUENCE    
  INTEGER as mpIpVpnIpCidrVpnId  
  Gauge32 as mpIpVpnIpCidrRouteNumber  

MpIpVpnIpCidrRouteEntry  
SEQUENCE    
  INTEGER as mpIpVpnIpCidrRouteVpnId  
  IpAddress as mpIpVpnIpCidrRouteDest  
  IpAddress as mpIpVpnIpCidrRouteMask  
  Integer32 as mpIpVpnIpCidrRouteTos  
  IpAddress as mpIpVpnIpCidrRouteNextHop  
  Integer32 as mpIpVpnIpCidrRouteIfIndex  
  INTEGER as mpIpVpnIpCidrRouteType  
  INTEGER as mpIpVpnIpCidrRouteProto  
  Integer32 as mpIpVpnIpCidrRouteAge  
  OBJECT IDENTIFIER as mpIpVpnIpCidrRouteInfo  
  Integer32 as mpIpVpnIpCidrRouteNextHopAS  
  Integer32 as mpIpVpnIpCidrRouteMetric1  
  Integer32 as mpIpVpnIpCidrRouteMetric2  
  Integer32 as mpIpVpnIpCidrRouteMetric3  
  Integer32 as mpIpVpnIpCidrRouteMetric4  
  Integer32 as mpIpVpnIpCidrRouteMetric5  
  RowStatus as mpIpVpnIpCidrRouteStatus  

MpIpVpnIpRouteEntry  
SEQUENCE    
  INTEGER as mpIpVpnIpRouteVpnId  
  IpAddress as mpIpVpnIpRouteDest  
  INTEGER as mpIpVpnIpRouteIfIndex  
  INTEGER as mpIpVpnIpRouteMetric1  
  INTEGER as mpIpVpnIpRouteMetric2  
  INTEGER as mpIpVpnIpRouteMetric3  
  INTEGER as mpIpVpnIpRouteMetric4  
  IpAddress as mpIpVpnIpRouteNextHop  
  INTEGER as mpIpVpnIpRouteType  
  INTEGER as mpIpVpnIpRouteProto  
  INTEGER as mpIpVpnIpRouteAge  
  IpAddress as mpIpVpnIpRouteMask  
  INTEGER as mpIpVpnIpRouteMetric5  
  OBJECT IDENTIFIER as mpIpVpnIpRouteInfo  

MpIpVpnIpNetToMediaEntry  
SEQUENCE    
  INTEGER as mpIpVpnIpNetToMediaVpnId  
  INTEGER as mpIpVpnIpNetToMediaIfIndex  
  PhysAddress as mpIpVpnIpNetToMediaPhysAddress  
  IpAddress as mpIpVpnIpNetToMediaNetAddress  
  INTEGER as mpIpVpnIpNetToMediaType  

MpIpVpnStaticProxyArpEntry  
SEQUENCE    
  INTEGER as mpIpVpnStaticProxyArpVpnId  
  INTEGER as mpIpVpnStaticProxyArpIfIndex  
  IpAddress as mpIpVpnStaticProxyArpNetAddress  
  IpAddress as mpIpVpnStaticProxyArpNetMask  
  INTEGER as mpIpVpnStaticProxyArpStatus  

MpIpVpnIcmpEntry  
SEQUENCE    
  INTEGER as mpIpVpnIcmpVpnId  
  Counter as mpIpVpnIcmpInMsgs  
  Counter as mpIpVpnIcmpInErrors  
  Counter as mpIpVpnIcmpInDestUnreachs  
  Counter as mpIpVpnIcmpInTimeExcds  
  Counter as mpIpVpnIcmpInParmProbs  
  Counter as mpIpVpnIcmpInSrcQuenchs  
  Counter as mpIpVpnIcmpInRedirects  
  Counter as mpIpVpnIcmpInEchos  
  Counter as mpIpVpnIcmpInEchoReps  
  Counter as mpIpVpnIcmpInTimestamps  
  Counter as mpIpVpnIcmpInTimestampReps  
  Counter as mpIpVpnIcmpInAddrMasks  
  Counter as mpIpVpnIcmpInAddrMaskReps  
  Counter as mpIpVpnIcmpOutMsgs  
  Counter as mpIpVpnIcmpOutErrors  
  Counter as mpIpVpnIcmpOutDestUnreachs  
  Counter as mpIpVpnIcmpOutTimeExcds  
  Counter as mpIpVpnIcmpOutParmProbs  
  Counter as mpIpVpnIcmpOutSrcQuenchs  
  Counter as mpIpVpnIcmpOutRedirects  
  Counter as mpIpVpnIcmpOutEchos  
  Counter as mpIpVpnIcmpOutEchoReps  
  Counter as mpIpVpnIcmpOutTimestamps  
  Counter as mpIpVpnIcmpOutTimestampReps  
  Counter as mpIpVpnIcmpOutAddrMasks  
  Counter as mpIpVpnIcmpOutAddrMaskReps  

MpIpVpnPingEntry  
SEQUENCE    
  INTEGER as mpIpVpnPingId  
  INTEGER as mpIpVpnPingVpnId  
  IpAddress as mpIpVpnPingTarget  
  INTEGER as mpIpVpnPingRequestSend  
  INTEGER as mpIpVpnPingDataLength  
  INTEGER as mpIpVpnPingSendTos  
  INTEGER as mpIpVpnPingSendTtl  
  INTEGER as mpIpVpnPingSendTimeOut  
  INTEGER as mpIpVpnPingSendInterface  
  INTEGER as mpIpVpnPingStatus  
  INTEGER as mpIpVpnPingResult  
  IpAddress as mpIpVpnPingErrorSourceAddress  

MpRip2IfConfEntry  
SEQUENCE    
  IpAddress as mpRip2IfConfAddress  
  INTEGER as mpRip2IfConfPoisoned  
  IpAddress as mpRip2IfConfAddress  
  INTEGER as mpRip2IfConfPoisoned  
  INTEGER as mpRip2IfConfSplitHorizon  
  INTEGER as mpRip2IfConfHostAdvertise  
  INTEGER as mpRip2IfConfInOffset  
  INTEGER as mpRip2IfConfOutOffset  
  INTEGER as mpRip2IfConfDefType  
  INTEGER as mpRip2IfConfDefMetric  
  IpAddress as mpRip2IfConfDefAddress  
  INTEGER as mpRip2IfConfDefTag  
  INTEGER as mpRip2IfConfDefProtocol  
  INTEGER as mpRip2IfConfDefImportList  
  INTEGER as mpRip2IfConfRoutePriority  

MpRip2PeerEntry  
SEQUENCE    
  IpAddress as mpRip2PeerAddress  
  INTEGER as mpRip2PeerVersion  
  RowStatus as mpRip2PeerStatus  

MpRip2ImportListEntry  
SEQUENCE    
  INTEGER as mpRip2ImportListProtocol  
  INTEGER as mpRip2ImportListNumber  
  INTEGER as mpRip2ImportListStatus  

MpRip2NetworkPriorityEntry  
SEQUENCE    
  IpAddress as mpRip2NetworkPriorityAddr  
  IpAddress as mpRip2NetworkPriorityMask  
  INTEGER as mpRip2NetworkPriorityValue  
  RowStatus as mpRip2NetworkPriorityStatus  

MpSnmpCommunityEntry  
SEQUENCE    
  INTEGER as mpSnmpCommunityIndex  
  INTEGER as mpSnmpCommunityStatus  
  INTEGER as mpSnmpCommunityAccess  
  IpAddress as mpSnmpCommunityAddr  
  DisplayString as mpSnmpCommunityName  

MpSnmpTrapCommunityEntry  
SEQUENCE    
  INTEGER as mpSnmpTrapCommunityIndex  
  INTEGER as mpSnmpTrapCommunityStatus  
  INTEGER as mpSnmpTrapCommunityType  
  IpAddress as mpSnmpTrapCommunityAddr  
  DisplayString as mpSnmpTrapCommunityName  

MpMonitorGroupEntry  
SEQUENCE    
  INTEGER as mpMonGrpIndex  
  OBJECT IDENTIFIER as mpMonGrpObjectId  
  INTEGER as mpMonGrpObjectInstance  
  INTEGER as mpMonGrpPollInt  
  INTEGER as mpMonGrpStatus  
  DisplayString as mpMonGrpName  

MpStatObjectEntry  
SEQUENCE    
  INTEGER as mpStatObjectIndex  
  INTEGER as mpStatObjectGroupId  
  OBJECT IDENTIFIER as mpStatObjectId  
  DisplayString as mpStatObjectName  
  INTEGER as mpStatObjectCurValue  
  INTEGER as mpStatObjectCumRate  
  INTEGER as mpStatObjectIntRate  

MpCliOperatorEntry  
SEQUENCE    
  INTEGER as mpCliOperatorIndex  
  DisplayString as mpCliOperatorName  
  DisplayString as mpCliOperatorPasswd  
  DisplayString as mpCliOperatorLoginPasswd  
  INTEGER as mpCliOperatorStatus  

MpCliSupervisorEntry  
SEQUENCE    
  INTEGER as mpCliSupervisorIndex  
  DisplayString as mpCliSupervisorName  
  DisplayString as mpCliSupervisorPasswd  
  DisplayString as mpCliSupervisorLoginPasswd  
  INTEGER as mpCliSupervisorStatus  

MpAtmInterfaceConfEntry  
SEQUENCE    
  INTEGER as mpAtmInterfaceIfIndex  
  OCTET STRING as mpAtmInterfaceAdminPrefix  
  OCTET STRING as mpAtmInterfaceAdminEsi  
  INTEGER as mpAtmInterfaceMaxVpiVciBits  

MpAtmVccConfigEntry  
SEQUENCE    
  INTEGER as mpAtmVccIfIndex  
  INTEGER as mpAtmVccFrameFormat  
  INTEGER as mpAtmVccF4OamSupport  
  INTEGER as mpAtmVccF5OamSupport  
  INTEGER as mpAtmVccFailTimerLof  
  INTEGER as mpAtmVccFailTimerLos  
  INTEGER as mpAtmVccRecoverTimerLof  
  INTEGER as mpAtmVccRecoverTimerLos  
  INTEGER as mpAtmVccFailTimerLop  
  INTEGER as mpAtmVccRecoverTimerLop  
  INTEGER as mpAtmVccCdv  
  INTEGER as mpAtmVccClockMode  

MpAtmSscopConfigEntry  
SEQUENCE    
  INTEGER as mpAtmSscopIfIndex  
  INTEGER as mpAtmSscopTimerConnectControl  
  INTEGER as mpAtmSscopTimerKeepalive  
  INTEGER as mpAtmSscopTimerNoResponse  
  INTEGER as mpAtmSscopTimerPoll  
  INTEGER as mpAtmSscopTimerIdle  
  INTEGER as mpAtmSscopMaxConnectControl  
  INTEGER as mpAtmSscopMaxPd  

MpAtmSignalingConfigEntry  
SEQUENCE    
  INTEGER as mpAtmSigIfIndex  
  INTEGER as mpAtmSigSvcSupportFlag  
  INTEGER as mpAtmSigUniVersion  

MpAtmIlmiConfigEntry  
SEQUENCE    
  INTEGER as mpAtmIlmiIfIndex  
  INTEGER as mpAtmIlmiFlag  

MpAtmStatisticsEntry  
SEQUENCE    
  INTEGER as mpAtmStatIfIndex  
  Counter as mpAtmStatVpiVciErrs  
  Counter as mpAtmStatRcvOverRunErrs  
  Counter as mpAtmStatInvalidCellErrs  
  Counter as mpAtmStatRcvBufEmptys  
  Counter as mpAtmStatRcvStsAlmostFulls  
  Counter as mpAtmStatSndStsAlmostFulls  
  Counter as mpAtmStatOolErrs  
  Counter as mpAtmStatLocErrs  
  Counter as mpAtmStatHecErrs  
  Counter as mpAtmStatOcdErrs  
  Counter as mpAtmStatTcOverFlowErrs  
  Counter as mpAtmStatParityErrs  
  Counter as mpAtmStatC2Errs  
  Counter as mpAtmStatLopErrs  
  Counter as mpAtmStatPaisErrs  
  Counter as mpAtmStatPrdiErrs  
  Counter as mpAtmStatB3Errs  
  Counter as mpAtmStatPathFebeErrs  
  Counter as mpAtmStatB2Errs  
  Counter as mpAtmStatLineFebeErrs  
  Counter as mpAtmStatLaisErrs  
  Counter as mpAtmStatLrdiErrs  
  Counter as mpAtmStatOofErrs  
  Counter as mpAtmStatB1Errs  
  Counter as mpAtmStatLosErrs  
  Counter as mpAtmStatLofErrs  
  Counter as mpAtmStatInPackets  
  Counter as mpAtmStatInOctets  
  Counter as mpAtmStatOutPackets  
  Counter as mpAtmStatOutOctets  

MpAtmNetPrefixEntry  
SEQUENCE    
  INTEGER as mpAtmNetPrefixPort  
  NetPrefix as mpAtmNetPrefixPrefix  
  INTEGER as mpAtmNetPrefixStatus  

MpAtmVpcEntry  
SEQUENCE    
  INTEGER as mpAtmVpcIfIndex  
  INTEGER as mpAtmVpcVpi  
  INTEGER as mpAtmVpcAdminStatus  
  INTEGER as mpAtmVpcOperStatus  
  TimeStamp as mpAtmVpcLastChange  
  INTEGER as mpAtmVpcShapingType  
  INTEGER as mpAtmVpcTransmitTrafficDescrIndex  
  RowStatus as mpAtmVpcRowStatus  

MpAtmTrafficEntry  
SEQUENCE    
  INTEGER as mpAtmTrafficDescrParamIndex  
  INTEGER as mpAtmTrafficCdv  

MpLisNameEntry  
SEQUENCE    
  INTEGER as mpLisIndex  
  INTEGER as mpLisRtrIndex  
  DisplayString as mpLisName  
  INTEGER as mpLisNameStatus  

MpLisAdminEntry  
SEQUENCE    
  INTEGER as mpLisAdmIndex  
  INTEGER as mpLisAdmAtmArpSvExistence  
  INTEGER as mpLisAdmAtmArpSvCallType  
  OCTET STRING as mpLisAdmAtmArpSvAtmAddress  
  INTEGER as mpLisAdmAtmArpSvAtmPortNumber  
  INTEGER as mpLisAdmAtmArpSvVpi  
  INTEGER as mpLisAdmAtmArpSvVci  
  INTEGER as mpLisAdmSvTrafficId  
  INTEGER as mpLisAdmAtmArpSvVcStatus  
  INTEGER as mpLisAdmAtmArpSvRetryCount  
  INTEGER as mpLisAdmLisStatus  
  OCTET STRING as mpLisAdmMyAtmAddressSel  
  IpAddress as mpLisAdmMyIpAddress  
  IpAddress as mpLisAdmMyNetMask  
  INTEGER as mpLisAdmAtmPortNumber  
  INTEGER as mpLisAdmAtmArpTables  
  INTEGER as mpLisAdmSndMtuSize  
  INTEGER as mpLisAdmRcvMtuSize  
  INTEGER as mpLisAdmTrafficId  
  RowStatus as mpLisAdmRowStatus  

MpLisAtmArpAdminEntry  
SEQUENCE    
  INTEGER as mpLisAtmArpAdmLisIndex  
  INTEGER as mpLisAtmArpAdmCallType  
  IpAddress as mpLisAtmArpAdmIpAddress  
  OCTET STRING as mpLisAtmArpAdmAtmAddress  
  OCTET STRING as mpLisAtmArpAdmMyAtmAddress  
  INTEGER as mpLisAtmArpAdmAtmPortNumber  
  INTEGER as mpLisAtmArpAdmVpi  
  INTEGER as mpLisAtmArpAdmVci  
  INTEGER as mpLisAtmArpAdmTrafficId  
  INTEGER as mpLisAtmArpAdmTableStatus  
  Gauge as mpLisAtmArpAdmAgingTime  
  INTEGER as mpLisAtmArpAdmRetryCount  
  RowStatus as mpLisAtmArpAdmRowStatus  

MpLisVcAdminEntry  
SEQUENCE    
  INTEGER as mpLisVcAdmLisIndex  
  IpAddress as mpLisVcAdmIpAddress  
  INTEGER as mpLisVcAdmType  
  INTEGER as mpLisVcAdmVcStatus  
  Gauge as mpLisVcAdmInactivityTime  
  Gauge as mpLisVcAdmHoldingTime  

MpLisStatisticsEntry  
SEQUENCE    
  INTEGER as mpLisStatIndex  
  Counter as mpLisStatAtmArpRequestSends  
  Counter as mpLisStatAtmArpReplyReceives  
  Counter as mpLisStatAtmArpNakReceives  
  Counter as mpLisStatAtmArpReplyTimeouts  
  Counter as mpLisStatInAtmArpRequestSends  
  Counter as mpLisStatInAtmArpReplyReceives  
  Counter as mpLisStatInAtmArpRequestReceives  
  Counter as mpLisStatInAtmArpReplyTimeouts  
  Counter as mpLisStatVcInactDisconnects  
  Counter as mpLisStatVcResourceDisconnects  
  Counter as mpLisStatAtmArpTableAgingouts  
  Counter as mpLisStatAtmArpTableDeletions  
  Counter as mpLisStatInPkts  
  Counter as mpLisStatInReceivePkts  
  Counter as mpLisStatInDiscards  
  Counter as mpLisStatInMtuSizeOvers  
  Counter as mpLisStatInSnapErrs  
  Counter as mpLisStatOutPkts  
  Counter as mpLisStatOutTransmitPkts  
  Counter as mpLisStatOutNoRoutes  
  Counter as mpLisStatOutSvFaults  
  Counter as mpLisStatOutCircuitFaults  
  Counter as mpLisStatOutMaxQueues  
  Counter as mpLisStatOutDestUnusuals  
  Counter as mpLisStatOutMtuSizeOvers  
  Counter as mpLisStatOutVcFailures  
  Counter as mpLisStatOutDiscards  
  Counter as mpLisStatOutMaxVcExceeds  
  Counter as mpLisStatVcSetupCounts  
  Counter as mpLisStatVcMaxExceedFailCounts  
  Counter as mpLisStatVcResourceFailCounts  
  Counter as mpLisStatVcAcceptCounts  
  Counter as mpLisStatVcMaxExceedDenyCounts  
  Counter as mpLisStatVcResourceDenyCounts  

MpDnsClientNameServerEntry  
SEQUENCE    
  IpAddress as mpDnsClientServerEntIpAddress  
  INTEGER as mpDnsClientServerEntStatus  

MpDnsClientStaticRREntry  
SEQUENCE    
  INTEGER as mpDnsClientStaticRREntIndex  
  DisplayString as mpDnsClientStaticRREntHostName  
  INTEGER as mpDnsClientStaticRREntTimeToLive  
  INTEGER as mpDnsClientStaticRREntType  
  IpAddress as mpDnsClientStaticRREntIpAddress  
  INTEGER as mpDnsClientStaticRREntStatus  

MpDnsClientLocalDomainEntry  
SEQUENCE    
  INTEGER as mpDnsClientLocalDomainEntIndex  
  DisplayString as mpDnsClientLocalDomainEntName  
  INTEGER as mpDnsClientLocalDomainEntStatus  

MpLecConfigEntry  
SEQUENCE    
  INTEGER as mpLecIndex  
  INTEGER as mpLecArpCacheDeleteTime  
  INTEGER as mpLecUnsolicArpResAccept  
  INTEGER as mpLecVccAgingAction  
  INTEGER as mpLecUnknownFrameSendTiming  
  INTEGER as mpLecType  
  INTEGER as mpLecPrimaryAtmInterface  
  INTEGER as mpLecDefaultSendTrafficId  
  OCTET STRING as mpLecAtmAddressSel  
  INTEGER as mpLecDefaultRcvTrafficId  
  INTEGER as mpLecLecsId  

MpLecsConfigEntry  
SEQUENCE    
  INTEGER as mpLecsIndex  
  INTEGER as mpLecsCallType  
  OCTET STRING as mpLecsAtmAddress  
  INTEGER as mpLecsInterface  
  INTEGER as mpLecsConfigDirectVpi  
  INTEGER as mpLecsConfigDirectVci  
  INTEGER as mpLecsConfigDirectSendTrafficId  
  RowStatus as mpLecsRowStatus  
  INTEGER as mpLecsConfigDirectRcvTrafficId  

MpLecServerConfigEntry  
SEQUENCE    
  INTEGER as mpLecSvIndex  
  INTEGER as mpLecSvConfigLecsType  
  INTEGER as mpLecSvConfigLecsIndex  
  INTEGER as mpLecSvLesCallType  
  INTEGER as mpLecSvCtrlDirectVccInterface  
  INTEGER as mpLecSvCtrlDirectVpi  
  INTEGER as mpLecSvCtrlDirectVci  
  INTEGER as mpLecSvCtrlDirectSendTrafficId  
  INTEGER as mpLecSvCtrlDistributeVccInterface  
  INTEGER as mpLecSvCtrlDistributeVpi  
  INTEGER as mpLecSvCtrlDistributeVci  
  INTEGER as mpLecSvCtrlDistributeSendTrafficId  
  INTEGER as mpLecSvBusCallType  
  INTEGER as mpLecSvMcastSendVccInterface  
  INTEGER as mpLecSvMcastSendVpi  
  INTEGER as mpLecSvMcastSendVci  
  INTEGER as mpLecSvMcastSendSendTrafficId  
  INTEGER as mpLecSvMcastForwardVccInterface  
  INTEGER as mpLecSvMcastForwardVpi  
  INTEGER as mpLecSvMcastForwardVci  
  INTEGER as mpLecSvMcastForwardSendTrafficId  
  INTEGER as mpLecSvCtrlDirectRcvTrafficId  
  INTEGER as mpLecSvCtrlDistributeRcvTrafficId  
  INTEGER as mpLecSvMcastSendRcvTrafficId  
  INTEGER as mpLecSvMcastForwardRcvTrafficId  

MpLeArpEntry  
SEQUENCE    
  INTEGER as mpLeArpLecIndex  
  MacAddress as mpLeArpMacAddress  
  INTEGER as mpLeArpCallType  
  INTEGER as mpLeArpInterface  
  INTEGER as mpLeArpVpi  
  INTEGER as mpLeArpVci  
  INTEGER as mpLeArpSendTrafficId  
  INTEGER as mpLeArpRcvTrafficId  

MpLecStatisticsEntry  
SEQUENCE    
  INTEGER as mpLecStatIndex  
  Counter as mpLecStatVcSetupSndCounts  
  Counter as mpLecStatVcSetupRcvCounts  
  Counter as mpLecStatVcReleaseSndCounts  
  Counter as mpLecStatVcReleaseRcvCounts  
  Counter as mpLecStatInContFrameFailures  
  Counter as mpLecStatInDataFrameFailures  
  Counter as mpLecStatInNarpRequests  
  Counter as mpLecStatInTopologyRequests  
  Counter as mpLecStatInBusUcastFrames  
  Counter as mpLecStatInBusMcastFrames  
  Counter as mpLecStatInBusBcastFrames  
  Counter as mpLecStatOutContFrameFailures  
  Counter as mpLecStatOutDataFrameFailures  
  Counter as mpLecStatOutNarpRequests  
  Counter as mpLecStatOutTopologyRequests  
  Counter as mpLecStatOutBusUcastFrames  
  Counter as mpLecStatOutBusMcastFrames  
  Counter as mpLecStatOutBusBcastFrames  
  Counter as mpLecStatEchoControlFrames  
  Counter as mpLecStatInNoIDEntryDataFrames  
  Counter as mpLecStatOutNoIDEntryDataFrames  
  Counter as mpLecStatEchoControlFrames  
  Counter as mpLecStatInNoIDEntryDataFrames  
  Counter as mpLecStatOutNoIDEntryDataFrames  

MpMpcCfgEntry  
SEQUENCE    
  INTEGER as mpMpcCfgIndex  
  INTEGER as mpMpcOperatStatus  
  INTEGER as mpMpcSndTrafficId  
  INTEGER as mpMpcRcvTrafficId  
  INTEGER as mpMpcPrtNum  
  INTEGER as mpMpcMaxMps  
  INTEGER as mpMpcMaxCache  

MpMpcCacheCntEntry  
SEQUENCE    
  INTEGER as mpMpcCacheCntIndex  
  INTEGER as mpMpcIngressCacheCnt  
  INTEGER as mpMpcEgressCacheCnt  

MpStpVlanEntry  
SEQUENCE    
  INTEGER as mpStpVlanIndex  
  INTEGER as mpStpVlanProtocolSpecification  
  INTEGER as mpStpVlanPriority  
  TimeTicks as mpStpVlanTimeSinceTopologyChange  
  Counter as mpStpVlanTopChanges  
  BridgeId as mpStpVlanDesignatedRoot  
  INTEGER as mpStpVlanRootCost  
  INTEGER as mpStpVlanRootPort  
  Timeout as mpStpVlanMaxAge  
  Timeout as mpStpVlanHelloTime  
  INTEGER as mpStpVlanHoldTime  
  Timeout as mpStpVlanForwardDelay  
  Timeout as mpStpVlanBridgeMaxAge  
  Timeout as mpStpVlanBridgeHelloTime  
  Timeout as mpStpVlanBridgeForwardDelay  
  INTEGER as mpStpVlanSupportStatus  

MpStpPortEntry  
SEQUENCE    
  INTEGER as mpStpPortVlanIndex  
  INTEGER as mpStpPort  
  INTEGER as mpStpPortPriority  
  INTEGER as mpStpPortState  
  INTEGER as mpStpPortEnable  
  INTEGER as mpStpPortPathCost  
  BridgeId as mpStpPortDesignatedRoot  
  INTEGER as mpStpPortDesignatedCost  
  BridgeId as mpStpPortDesignatedBridge  
  OCTET STRING as mpStpPortDesignatedPort  
  Counter as mpStpPortForwardTransitions  

MpLlcPvcEntry  
SEQUENCE    
  INTEGER as mpLlcPvcIdIndex  
  INTEGER as mpLlcPvcPort  
  INTEGER as mpLlcPvcVpi  
  INTEGER as mpLlcPvcVci  
  INTEGER as mpLlcPvcSdu  
  INTEGER as mpLlcPvcVcPriority  
  INTEGER as mpLlcPvcForwardTrafficId  
  INTEGER as mpLlcPvcBackwardTrafficId  
  INTEGER as mpLlcPvcAdminStatus  
  INTEGER as mpLlcPvcOperStatus  
  RowStatus as mpLlcPvcRowStatus  

MpOspfGlobalEntry  
SEQUENCE    
  INTEGER as mpOspfGlobalProcessId  
  INTEGER as mpOspfGlobalMode  
  IpAddress as mpOspfGlobalRouterId  
  TruthValue as mpOspfGlobalAreaBdrRtrStatus  
  TruthValue as mpOspfGlobalASBdrRtrStatus  
  INTEGER as mpOspfGlobalRFC1583Compatibility  
  INTEGER as mpOspfGlobalDefaultRouteType  
  INTEGER as mpOspfGlobalDefMetric  
  INTEGER as mpOspfGlobalDefExternalType  
  IpAddress as mpOspfGlobalDefAddress  
  INTEGER as mpOspfGlobalDefTag  
  INTEGER as mpOspfGlobalDefProtocol  
  INTEGER as mpOspfGlobalDefImportList  
  INTEGER as mpOspfGlobalIntraAreaRoutePriority  
  INTEGER as mpOspfGlobalInterAreaRoutePriority  
  INTEGER as mpOspfGlobalExternalRoutePriority  
  INTEGER as mpOspfGlobalMulticastExtensions  
  TruthValue as mpOspfGlobalDemandExtensions  
  Gauge as mpOspfGlobalRouterLsaCount  
  Gauge as mpOspfGlobalNetworkLsaCount  
  Gauge as mpOspfGlobalSummaryNetworkLsaCount  
  Gauge as mpOspfGlobalSummaryRouterLsaCount  
  Gauge as mpOspfGlobalExternalLsaCount  
  Gauge as mpOspfGlobalExternalLsaCksumSum  
  Counter as mpOspfGlobalReceives  
  Counter as mpOspfGlobalReceiveBadAuths  
  Counter as mpOspfGlobalReceiveBadPackets  
  Counter as mpOspfGlobalMulticastSends  
  Counter as mpOspfGlobalUnicastSends  
  Counter as mpOspfGlobalSpfRuns  
  Counter as mpOspfGlobalIncSummaryUpdates  
  Counter as mpOspfGlobalIncExternalUpdates  
  Counter as mpOspfGlobalLsAgeOutCounts  
  Counter as mpOspfGlobalLsFlushCounts  
  Counter as mpOspfGlobalLsdbAllocs  
  Counter as mpOspfGlobalLsdbFrees  
  Counter as mpOspfGlobalBufferAllocFailures  

MpOspfImportListEntry  
SEQUENCE    
  INTEGER as mpOspfImportListProcessId  
  INTEGER as mpOspfImportListProtocol  
  INTEGER as mpOspfImportListNumber  
  RowStatus as mpOspfImportListStatus  

MpOspfNetworkPriorityEntry  
SEQUENCE    
  INTEGER as mpOspfNetworkPriorityProcessID  
  IpAddress as mpOspfNetworkPriorityAddress  
  IpAddress as mpOspfNetworkPriorityMask  
  INTEGER as mpOspfNetworkPriorityValue  
  RowStatus as mpOspfNetworkPriorityStatus  

MpOspfAreaEntry  
SEQUENCE    
  INTEGER as mpOspfAreaProcessId  
  IpAddress as mpOspfAreaId  
  INTEGER as mpOspfAreaImportAsExternal  
  INTEGER as mpOspfAreaStubMetric  
  INTEGER as mpOspfAreaSummary  
  Gauge as mpOspfAreaConfigIfCount  
  Gauge as mpOspfAreaActiveIfCount  
  TruthValue as mpOspfAreaTransitCapability  
  Gauge as mpOspfAreaTransitNetCount  
  Gauge as mpOspfAreaRtrCount  
  Gauge as mpOspfAreaBdrRtrCount  
  Gauge as mpOspfAreaAsBdrRtrCount  
  Gauge as mpOspfAreaLsaCount  
  Gauge as mpOspfAreaLsaCksumSum  
  RowStatus as mpOspfAreaStatus  

MpOspfLsdbEntry  
SEQUENCE    
  INTEGER as mpOspfLsdbProcessId  
  IpAddress as mpOspfLsdbAreaId  
  INTEGER as mpOspfLsdbType  
  IpAddress as mpOspfLsdbLsid  
  IpAddress as mpOspfLsdbRouterId  
  INTEGER as mpOspfLsdbSequence  
  INTEGER as mpOspfLsdbAge  
  INTEGER as mpOspfLsdbChecksum  
  OCTET STRING as mpOspfLsdbAdvertisement  

MpOspfAreaRangeEntry  
SEQUENCE    
  INTEGER as mpOspfAreaRangeProcessId  
  IpAddress as mpOspfAreaRangeAreaId  
  IpAddress as mpOspfAreaRangeNet  
  IpAddress as mpOspfAreaRangeMask  
  INTEGER as mpOspfAreaRangeEffect  
  RowStatus as mpOspfAreaRangeStatus  

MpOspfHostEntry  
SEQUENCE    
  INTEGER as mpOspfHostProcessId  
  IpAddress as mpOspfHostIpAddress  
  INTEGER as mpOspfHostMetric  
  RowStatus as mpOspfHostStatus  

MpOspfIfEntry  
SEQUENCE    
  INTEGER as mpOspfIfProcessId  
  INTEGER as mpOspfIfIndex  
  IpAddress as mpOspfIfIpAddress  
  IpAddress as mpOspfIfIpMask  
  IpAddress as mpOspfIfAreaId  
  INTEGER as mpOspfIfType  
  INTEGER as mpOspfIfMetric  
  INTEGER as mpOspfIfRtrPriority  
  INTEGER as mpOspfIfTransitDelay  
  INTEGER as mpOspfIfRetransInterval  
  INTEGER as mpOspfIfHelloInterval  
  INTEGER as mpOspfIfRtrDeadInterval  
  INTEGER as mpOspfIfPollInterval  
  INTEGER as mpOspfIfState  
  IpAddress as mpOspfIfDesignatedRouter  
  IpAddress as mpOspfIfBackupDesignatedRouter  
  INTEGER as mpOspfIfAuthType  
  INTEGER as mpOspfIfAuthKeyId  
  OCTET STRING as mpOspfIfAuthKey  
  INTEGER as mpOspfIfMulticastForwarding  
  TruthValue as mpOspfIfDemand  
  Counter as mpOspfIfEvents  
  Gauge as mpOspfIfNeighbors  
  Gauge as mpOspfIfAdjacencies  
  Gauge as mpOspfIfFullyAdjacencies  
  Counter as mpOspfIfLsUpdateFloods  
  Counter as mpOspfIfDelayedAckSends  
  RowStatus as mpOspfIfStatus  

MpOspfVirtIfEntry  
SEQUENCE    
  INTEGER as mpOspfVirtIfProcessId  
  INTEGER as mpOspfVirtIfId  
  IpAddress as mpOspfVirtIfNeighbor  
  IpAddress as mpOspfVirtIfAreaId  
  INTEGER as mpOspfVirtIfMetric  
  INTEGER as mpOspfVirtIfTransitDelay  
  INTEGER as mpOspfVirtIfRetransInterval  
  INTEGER as mpOspfVirtIfHelloInterval  
  INTEGER as mpOspfVirtIfRtrDeadInterval  
  INTEGER as mpOspfVirtIfState  
  INTEGER as mpOspfVirtIfAuthType  
  INTEGER as mpOspfVirtIfAuthKeyId  
  OCTET STRING as mpOspfVirtIfAuthKey  
  Counter as mpOspfVirtIfEvents  
  Gauge as mpOspfVirtIfNeighbors  
  Gauge as mpOspfVirtIfAdjacencies  
  Gauge as mpOspfVirtIfFullyAdjacencies  
  Counter as mpOspfVirtIfLsUpdateFloods  
  Counter as mpOspfVirtIfDelayedAckSends  
  RowStatus as mpOspfVirtIfStatus  

MpOspfNbrEntry  
SEQUENCE    
  INTEGER as mpOspfNbrProcessId  
  INTEGER as mpOspfNbrIfIndex  
  IpAddress as mpOspfNbrIpAddress  
  IpAddress as mpOspfNbrRtrId  
  INTEGER as mpOspfNbrOptions  
  INTEGER as mpOspfNbrPriority  
  INTEGER as mpOspfNbrCost  
  INTEGER as mpOspfNbrState  
  INTEGER as mpOspfNbrPermanence  
  TruthValue as mpOspfNbrHelloSuppressed  
  IpAddress as mpOspfNbrSelectedDr  
  IpAddress as mpOspfNbrSelectedBdr  
  Gauge as mpOspfNbrLsSummaryListLen  
  Gauge as mpOspfNbrLsRetransQLen  
  Gauge as mpOspfNbrLsReqListLen  
  Counter as mpOspfNbrLsUpdateRetrans  
  Counter as mpOspfNbrDirectAckSends  
  Counter as mpOspfNbrDupUpdateReceives  
  Counter as mpOspfNbrOldUpdateReceives  
  Counter as mpOspfNbrDupAckReceives  
  Counter as mpOspfNbrLosses  
  Counter as mpOspfNbrAdjacencyResets  
  RowStatus as mpOspfNbrStatus  

MpOspfVirtNbrEntry  
SEQUENCE    
  INTEGER as mpOspfVirtNbrProcessId  
  INTEGER as mpOspfVirtNbrIfId  
  IpAddress as mpOspfVirtNbrAreaId  
  IpAddress as mpOspfVirtNbrRtrId  
  IpAddress as mpOspfVirtNbrIpAddress  
  INTEGER as mpOspfVirtNbrOptions  
  INTEGER as mpOspfVirtNbrState  
  TruthValue as mpOspfVirtNbrHelloSuppressed  
  Gauge as mpOspfVirtNbrLsSummaryListLen  
  Gauge as mpOspfVirtNbrLsRetransQLen  
  Gauge as mpOspfVirtNbrLsReqListLen  
  Counter as mpOspfVirtNbrLsUpdateRetrans  
  Counter as mpOspfVirtNbrDirectAckSends  
  Counter as mpOspfVirtNbrDupUpdateReceives  
  Counter as mpOspfVirtNbrOldUpdateReceives  
  Counter as mpOspfVirtNbrDupAckReceives  
  Counter as mpOspfVirtNbrLosses  
  Counter as mpOspfVirtNbrAdjacencyResets  

MpOspfExtLsdbEntry  
SEQUENCE    
  INTEGER as mpOspfExtLsdbProcessId  
  IpAddress as mpOspfExtLsdbLsid  
  IpAddress as mpOspfExtLsdbRouterId  
  INTEGER as mpOspfExtLsdbType  
  INTEGER as mpOspfExtLsdbSequence  
  INTEGER as mpOspfExtLsdbAge  
  INTEGER as mpOspfExtLsdbChecksum  
  OCTET STRING as mpOspfExtLsdbAdvertisement