MPLS-MIB

File: MPLS-MIB.mib (33270 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC JUNIPER-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Integer32 Counter32 Counter64
IpAddress DisplayString TimeStamp
jnxMibs

Defined Objects

mpls 1.3.6.1.4.1.2636.3.2
The MIB module for Multi-Protocol Label Switched Paths.
MODULE-IDENTITY    

mplsLspTraps 1.3.6.1.4.1.2636.3.2.0
OBJECT IDENTIFIER    

mplsLspInfoUp 1.3.6.1.4.1.2636.3.2.0.1
An mplsLspInfoUp trap signifies that the specified LSP is up. The current active path for the LSP is mplsPathInfoName.
NOTIFICATION-TYPE    
  mplsLspInfoName  
  mplsPathInfoName  

mplsLspInfoDown 1.3.6.1.4.1.2636.3.2.0.2
An mplsLspInfoDown trap signifies that the specified LSP is down, because the current active path mplsPathInfoName went down.
NOTIFICATION-TYPE    
  mplsLspInfoName  
  mplsPathInfoName  

mplsLspInfoChange 1.3.6.1.4.1.2636.3.2.0.3
An mplsLspInfoChange trap signifies that the the specified LSP has switched traffic to the new active path 'toLspPath'. The LSP maintains up state before and after the switch over
NOTIFICATION-TYPE    
  mplsLspInfoName  
  mplsPathInfoName  

mplsLspInfoPathDown 1.3.6.1.4.1.2636.3.2.0.4
An mplsLspInfoPathDown trap signifies that the specified path mplsPathName for the specified LSP mplsLspInfoName went down
NOTIFICATION-TYPE    
  mplsLspInfoName  
  mplsPathInfoName  

mplsLspInfoPathUp 1.3.6.1.4.1.2636.3.2.0.5
An mplsLspInfoPathUp trap signifies that the specified path mplsPathName for the specified LSP mplsLspInfoName came up
NOTIFICATION-TYPE    
  mplsLspInfoName  
  mplsPathInfoName  

mplsInfo 1.3.6.1.4.1.2636.3.2.1
OBJECT IDENTIFIER    

mplsVersion 1.3.6.1.4.1.2636.3.2.1.1
MPLS version number.
OBJECT-TYPE    
  Integer32  

mplsSignalingProto 1.3.6.1.4.1.2636.3.2.1.2
MPLS signaling protocol.
OBJECT-TYPE    
  INTEGER none(1), other(2), rsvp(3), ldp(4)  

mplsConfiguredLsps 1.3.6.1.4.1.2636.3.2.1.3
Number of configured LSPs.
OBJECT-TYPE    
  Integer32  

mplsActiveLsps 1.3.6.1.4.1.2636.3.2.1.4
Number of active LSPs.
OBJECT-TYPE    
  Integer32  

mplsTEInfo 1.3.6.1.4.1.2636.3.2.2
OBJECT IDENTIFIER    

mplsTEDistProtocol 1.3.6.1.4.1.2636.3.2.2.1
IGP used to distribute Traffic Engineering information and topology to each LSR for the purpose of automatic path computation.
OBJECT-TYPE    
  INTEGER none(1), isis(2), ospf(3), isis-ospf(4)  

mplsAdminGroupList 1.3.6.1.4.1.2636.3.2.2.2
List of configured administrative groups. Administrative groups are used to label links in the Traffic Engineering topology in order to place constraints (include and exclude) on LSP paths.
OBJECT-TYPE    
  SEQUENCE OF  
    MplsAdminGroup

mplsAdminGroup 1.3.6.1.4.1.2636.3.2.2.2.1
A mapping between a configured group number and its human-readable name. The group number should be between 0 and 31, inclusive.
OBJECT-TYPE    
  MplsAdminGroup  

mplsAdminGroupNumber 1.3.6.1.4.1.2636.3.2.2.2.1.1
Index of the administrative group.
OBJECT-TYPE    
  INTEGER 0..31  

mplsAdminGroupName 1.3.6.1.4.1.2636.3.2.2.2.1.2
Name of the administrative group.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

mplsLspList 1.3.6.1.4.1.2636.3.2.3
******* Deprecated Object ****** List of Configured Label Switched Paths. This object has been deprecated and replaced by mplsLspInfoList
OBJECT-TYPE    
  SEQUENCE OF  
    MplsLspEntry

mplsLspEntry 1.3.6.1.4.1.2636.3.2.3.1
******* Deprecated Object ****** Entry containing information about a particular Label Switched Path. This object has been deprecated and replaced by mplsLspInfoEntry
OBJECT-TYPE    
  MplsLspEntry  

mplsLspName 1.3.6.1.4.1.2636.3.2.3.1.1
******* Deprecated Object ****** Name of the Label Switched Path. This object has been deprecated and replaced by mplsLspInfoName
OBJECT-TYPE    
  DisplayString SIZE(32)  

mplsLspState 1.3.6.1.4.1.2636.3.2.3.1.2
The operational state of the LSP.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down(3), notInService(4), backupActive(5)  

mplsLspOctets 1.3.6.1.4.1.2636.3.2.3.1.3
The number of octets that have been forwarded over current LSP active path. The number reported is not realtime, may subject to several minutes delay. The delay is controllable by mpls statistics gathering interval, which by default is once every 5 minutes. If mpls statistics gathering is not enabled, this number will not increment.
OBJECT-TYPE    
  Counter64  

mplsLspPackets 1.3.6.1.4.1.2636.3.2.3.1.4
The number of packets that have been forwarded over current LSP active path. The number reported is not realtime, may subject to several minutes delay. The delay is controllable by mpls statistics gathering interval, which by default is once every 5 minutes. If mpls statistics gathering is not enabled, this number will not increment.
OBJECT-TYPE    
  Counter64  

mplsLspAge 1.3.6.1.4.1.2636.3.2.3.1.5
The age (i.e., time from creation till now) of this LSP in 10-millisecond periods.
OBJECT-TYPE    
  TimeStamp  

mplsLspTimeUp 1.3.6.1.4.1.2636.3.2.3.1.6
The total time in 10-millisecond units that this LSP has been operational. For example, the percentage up time can be determined by computing (mplsLspTimeUp/mplsLspAge * 100 %).
OBJECT-TYPE    
  TimeStamp  

mplsLspPrimaryTimeUp 1.3.6.1.4.1.2636.3.2.3.1.7
The total time in 10-millisecond units that this LSP's primary path has been operational. For example, the percentage contribution of the primary path to the operational time is given by (mplsLspPrimaryTimeUp/mplsLspTimeUp * 100) %.
OBJECT-TYPE    
  TimeStamp  

mplsLspTransitions 1.3.6.1.4.1.2636.3.2.3.1.8
The number of state transitions (up -> down and down -> up) this LSP has undergone.
OBJECT-TYPE    
  Counter32  

mplsLspLastTransition 1.3.6.1.4.1.2636.3.2.3.1.9
The time in 10-millisecond units since the last transition occurred on this LSP.
OBJECT-TYPE    
  TimeStamp  

mplsLspPathChanges 1.3.6.1.4.1.2636.3.2.3.1.10
The number of path changes this LSP has had. For every path change (path down, path up, path change), a corresponding syslog/trap (if enabled) is generated for it.
OBJECT-TYPE    
  Counter32  

mplsLspLastPathChange 1.3.6.1.4.1.2636.3.2.3.1.11
The time in 10-millisecond units since the last change occurred on this LSP.
OBJECT-TYPE    
  TimeStamp  

mplsLspConfiguredPaths 1.3.6.1.4.1.2636.3.2.3.1.12
The number of paths configured for this LSP.
OBJECT-TYPE    
  Integer32  

mplsLspStandbyPaths 1.3.6.1.4.1.2636.3.2.3.1.13
The number of standby paths configured for this LSP.
OBJECT-TYPE    
  Integer32  

mplsLspOperationalPaths 1.3.6.1.4.1.2636.3.2.3.1.14
The number of operational paths for this LSP. This includes the path currently active, as well as operational standby paths.
OBJECT-TYPE    
  Integer32  

mplsLspFrom 1.3.6.1.4.1.2636.3.2.3.1.15
Source IP address of this LSP.
OBJECT-TYPE    
  IpAddress  

mplsLspTo 1.3.6.1.4.1.2636.3.2.3.1.16
Destination IP address of this LSP.
OBJECT-TYPE    
  IpAddress  

mplsPathName 1.3.6.1.4.1.2636.3.2.3.1.17
The name of the active path for this LSP, if any. If there is none, the name should be empty; in that case, the rest of the fields in mplsLspEntry are meaningless.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

mplsPathType 1.3.6.1.4.1.2636.3.2.3.1.18
The type of path that is active, i.e., a primary path, a standby path, a generic secondary path, or a bypass path. The value other, primary, standby and secondary apply to data LSPs, and are meaningful only if mplsPathName is not empty. The value bypass applies to bypass tunnels. A bypass tunnel may have an empty mplsPathName.
OBJECT-TYPE    
  INTEGER other(1), primary(2), standby(3), secondary(4), bypass(5)  

mplsPathExplicitRoute 1.3.6.1.4.1.2636.3.2.3.1.19
The explicit route used to set up this LSP. This may either be the route configured by the user, or a route automatically computed to satisfy constraints set by the user. This field is a displayable string in the format of XXX.XXX.XXX.XXX S/L repeated for each explicit address. The S/L character stands for Strict/Loose route. This field is meaningless unless mplsPathName is not empty
OBJECT-TYPE    
  OCTET STRING SIZE(0..1024)  

mplsPathRecordRoute 1.3.6.1.4.1.2636.3.2.3.1.20
The route actually used for this path, as recorded by the signaling protocol. This field is a displayable string in the format of XXX.XXX.XXX.XXX repeated for each address. This field is meaningless unless mplsPathName is not empty
OBJECT-TYPE    
  OCTET STRING SIZE(0..1024)  

mplsPathBandwidth 1.3.6.1.4.1.2636.3.2.3.1.21
The configured bandwidth for this LSP, in units of thousands of bits per second (Kbps). This field is meaningless unless mplsPathName is not empty
OBJECT-TYPE    
  Integer32  

mplsPathCOS 1.3.6.1.4.1.2636.3.2.3.1.22
The configured Class Of Service on this path. If the value is between 0 and 7 inclusive, this value will be inserted in the 3 bit COS field in the label. If the value is 255, the value in the COS field of the label will depend on other factors. This field is meaningless unless mplsPathName is not empty
OBJECT-TYPE    
  INTEGER 0..7 | 255  

mplsPathInclude 1.3.6.1.4.1.2636.3.2.3.1.23
This is a configured set of colors (administrative groups) specified as a bit vector (i.e., bit n is 1 if color n is in the set, where n = 0 is the LSB). For each link that this path goes through, the link MUST have colors associated with it, and the intersection of the link's colors and the 'include' set MUST be non-null. This field is meaningless unless mplsPathName is not empty
OBJECT-TYPE    
  Integer32  

mplsPathExclude 1.3.6.1.4.1.2636.3.2.3.1.24
This is a configured set of colors (administrative groups) specified as a bit vector (i.e., bit n is 1 if color n is in the set, where n = 0 is the LSB). For each link that this path goes through, the link MUST have colors associated with it, and the intersection of the link's colors and the 'exclude' set MUST be null. This field is meaningless unless mplsPathName is not empty
OBJECT-TYPE    
  Integer32  

mplsPathSetupPriority 1.3.6.1.4.1.2636.3.2.3.1.25
The setup priority configured for this path. This field is meaningless unless mplsPathName is not empty
OBJECT-TYPE    
  INTEGER 0..7  

mplsPathHoldPriority 1.3.6.1.4.1.2636.3.2.3.1.26
The hold priority configured for this path. This field is meaningless unless mplsPathName is not empty
OBJECT-TYPE    
  INTEGER 0..7  

mplsPathProperties 1.3.6.1.4.1.2636.3.2.3.1.27
The set of configured properties for this path, expressed as a bit map. For example, if the path is an adaptive path, the bit corresponding to bit value xxx is set. This field is meaningless unless mplsPathName is not empty
OBJECT-TYPE    
  INTEGER record-route(1), adaptive(2), cspf(4), mergeable(8), preemptable(16), preemptive(32), fast-reroute(64)  

mplsTraps 1.3.6.1.4.1.2636.3.2.4
OBJECT IDENTIFIER    

mplsLspUp 1.3.6.1.4.1.2636.3.2.4.1
An mplsLspUp trap signifies that the specified LSP is up. The current active path for the LSP is mplsPathName.
NOTIFICATION-TYPE    
  mplsLspName  
  mplsPathName  

mplsLspDown 1.3.6.1.4.1.2636.3.2.4.2
An mplsLspDown trap signifies that the specified LSP is down, because the current active path mplsPathName went down.
NOTIFICATION-TYPE    
  mplsLspName  
  mplsPathName  

mplsLspChange 1.3.6.1.4.1.2636.3.2.4.3
An mplsLspChange trap signifies that the the specified LSP has switched traffic to the new active path 'toLspPath'. The LSP maintains up state before and after the switch over
NOTIFICATION-TYPE    
  mplsLspName  
  mplsPathName  

mplsLspPathDown 1.3.6.1.4.1.2636.3.2.4.4
An mplsLspPathDown trap signifies that the specified path mplsPathName for the specified LSP mplsLspName went down
NOTIFICATION-TYPE    
  mplsLspName  
  mplsPathName  

mplsLspPathUp 1.3.6.1.4.1.2636.3.2.4.5
An mplsLspPathUp trap signifies that the specified path mplsPathName for the specified LSP mplsLspName came up
NOTIFICATION-TYPE    
  mplsLspName  
  mplsPathName  

mplsLspInfoList 1.3.6.1.4.1.2636.3.2.5
List of Configured Label Switched Paths.
OBJECT-TYPE    
  SEQUENCE OF  
    MplsLspInfoEntry

mplsLspInfoEntry 1.3.6.1.4.1.2636.3.2.5.1
Entry containing information about a particular Label Switched Path.
OBJECT-TYPE    
  MplsLspInfoEntry  

mplsLspInfoName 1.3.6.1.4.1.2636.3.2.5.1.1
Name of the Label Switched Path.
OBJECT-TYPE    
  DisplayString SIZE(1..64)  

mplsLspInfoState 1.3.6.1.4.1.2636.3.2.5.1.2
The operational state of the LSP.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down(3), notInService(4), backupActive(5)  

mplsLspInfoOctets 1.3.6.1.4.1.2636.3.2.5.1.3
The number of octets that have been forwarded over current LSP active path. The number reported is not realtime, may subject to several minutes delay. The delay is controllable by mpls statistics gathering interval, which by default is once every 5 minutes. If mpls statistics gathering is not enabled, this number will not increment.
OBJECT-TYPE    
  Counter64  

mplsLspInfoPackets 1.3.6.1.4.1.2636.3.2.5.1.4
The number of packets that have been forwarded over current LSP active path. The number reported is not realtime, may subject to several minutes delay. The delay is controllable by mpls statistics gathering interval, which by default is once every 5 minutes. If mpls statistics gathering is not enabled, this number will not increment.
OBJECT-TYPE    
  Counter64  

mplsLspInfoAge 1.3.6.1.4.1.2636.3.2.5.1.5
The age (i.e., time from creation till now) of this LSP in 10-millisecond periods.
OBJECT-TYPE    
  TimeStamp  

mplsLspInfoTimeUp 1.3.6.1.4.1.2636.3.2.5.1.6
The total time in 10-millisecond units that this LSP has been operational. For example, the percentage up time can be determined by computing (mplsLspInfoTimeUp/mplsLspInfoAge * 100 %).
OBJECT-TYPE    
  TimeStamp  

mplsLspInfoPrimaryTimeUp 1.3.6.1.4.1.2636.3.2.5.1.7
The total time in 10-millisecond units that this LSP's primary path has been operational. For example, the percentage contribution of the primary path to the operational time is given by (mplsLspInfoPrimaryTimeUp/mplsLspInfoTimeUp * 100) %.
OBJECT-TYPE    
  TimeStamp  

mplsLspInfoTransitions 1.3.6.1.4.1.2636.3.2.5.1.8
The number of state transitions (up -> down and down -> up) this LSP has undergone.
OBJECT-TYPE    
  Counter32  

mplsLspInfoLastTransition 1.3.6.1.4.1.2636.3.2.5.1.9
The time in 10-millisecond units since the last transition occurred on this LSP.
OBJECT-TYPE    
  TimeStamp  

mplsLspInfoPathChanges 1.3.6.1.4.1.2636.3.2.5.1.10
The number of path changes this LSP has had. For every path change (path down, path up, path change), a corresponding syslog/trap (if enabled) is generated for it.
OBJECT-TYPE    
  Counter32  

mplsLspInfoLastPathChange 1.3.6.1.4.1.2636.3.2.5.1.11
The time in 10-millisecond units since the last change occurred on this LSP.
OBJECT-TYPE    
  TimeStamp  

mplsLspInfoConfiguredPaths 1.3.6.1.4.1.2636.3.2.5.1.12
The number of paths configured for this LSP.
OBJECT-TYPE    
  Integer32  

mplsLspInfoStandbyPaths 1.3.6.1.4.1.2636.3.2.5.1.13
The number of standby paths configured for this LSP.
OBJECT-TYPE    
  Integer32  

mplsLspInfoOperationalPaths 1.3.6.1.4.1.2636.3.2.5.1.14
The number of operational paths for this LSP. This includes the path currently active, as well as operational standby paths.
OBJECT-TYPE    
  Integer32  

mplsLspInfoFrom 1.3.6.1.4.1.2636.3.2.5.1.15
Source IP address of this LSP.
OBJECT-TYPE    
  IpAddress  

mplsLspInfoTo 1.3.6.1.4.1.2636.3.2.5.1.16
Destination IP address of this LSP.
OBJECT-TYPE    
  IpAddress  

mplsPathInfoName 1.3.6.1.4.1.2636.3.2.5.1.17
The name of the active path for this LSP, if any. If there is none, the name should be empty; in that case, the rest of the fields in mplsLspInfoEntry are meaningless.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

mplsPathInfoType 1.3.6.1.4.1.2636.3.2.5.1.18
The type of path that is active, i.e., a primary path, a standby path, a generic secondary path, or a bypass path. The value other, primary, standby and secondary apply to data LSPs, and are meaningful only if mplsPathInfoName is not empty. The value bypass applies to bypass tunnels. A bypass tunnel may have an empty mplsPathInfoName.
OBJECT-TYPE    
  INTEGER other(1), primary(2), standby(3), secondary(4), bypass(5)  

mplsPathInfoExplicitRoute 1.3.6.1.4.1.2636.3.2.5.1.19
The explicit route used to set up this LSP. This may either be the route configured by the user, or a route automatically computed to satisfy constraints set by the user. This field is a displayable string in the format of XXX.XXX.XXX.XXX S/L repeated for each explicit address. The S/L character stands for Strict/Loose route. This field is meaningless unless mplsPathInfoName is not empty
OBJECT-TYPE    
  OCTET STRING SIZE(0..1024)  

mplsPathInfoRecordRoute 1.3.6.1.4.1.2636.3.2.5.1.20
The route actually used for this path, as recorded by the signaling protocol. This field is a displayable string in the format of XXX.XXX.XXX.XXX repeated for each address. This field is meaningless unless mplsPathInfoName is not empty
OBJECT-TYPE    
  OCTET STRING SIZE(0..1024)  

mplsPathInfoBandwidth 1.3.6.1.4.1.2636.3.2.5.1.21
The configured bandwidth for this LSP, in units of thousands of bits per second (Kbps). This field is meaningless unless mplsPathInfoName is not empty
OBJECT-TYPE    
  Integer32  

mplsPathInfoCOS 1.3.6.1.4.1.2636.3.2.5.1.22
The configured Class Of Service on this path. If the value is between 0 and 7 inclusive, this value will be inserted in the 3 bit COS field in the label. If the value is 255, the value in the COS field of the label will depend on other factors. This field is meaningless unless mplsPathInfoName is not empty
OBJECT-TYPE    
  INTEGER 0..7 | 255  

mplsPathInfoInclude 1.3.6.1.4.1.2636.3.2.5.1.23
This is a configured set of colors (administrative groups) specified as a bit vector (i.e., bit n is 1 if color n is in the set, where n = 0 is the LSB). For each link that this path goes through, the link MUST have colors associated with it, and the intersection of the link's colors and the 'include' set MUST be non-null. This field is meaningless unless mplsPathInfoName is not empty
OBJECT-TYPE    
  Integer32  

mplsPathInfoExclude 1.3.6.1.4.1.2636.3.2.5.1.24
This is a configured set of colors (administrative groups) specified as a bit vector (i.e., bit n is 1 if color n is in the set, where n = 0 is the LSB). For each link that this path goes through, the link MUST have colors associated with it, and the intersection of the link's colors and the 'exclude' set MUST be null. This field is meaningless unless mplsPathInfoName is not empty
OBJECT-TYPE    
  Integer32  

mplsPathInfoSetupPriority 1.3.6.1.4.1.2636.3.2.5.1.25
The setup priority configured for this path. This field is meaningless unless mplsPathInfoName is not empty
OBJECT-TYPE    
  INTEGER 0..7  

mplsPathInfoHoldPriority 1.3.6.1.4.1.2636.3.2.5.1.26
The hold priority configured for this path. This field is meaningless unless mplsPathInfoName is not empty
OBJECT-TYPE    
  INTEGER 0..7  

mplsPathInfoProperties 1.3.6.1.4.1.2636.3.2.5.1.27
The set of configured properties for this path, expressed as a bit map. For example, if the path is an adaptive path, the bit corresponding to bit value xxx is set. This field is meaningless unless mplsPathInfoName is not empty
OBJECT-TYPE    
  INTEGER record-route(1), adaptive(2), cspf(4), mergeable(8), preemptable(16), preemptive(32), fast-reroute(64)  

Defined Objects

MplsAdminGroup  
SEQUENCE    
  INTEGER as mplsAdminGroupNumber  
  DisplayString as mplsAdminGroupName  

MplsLspEntry  
SEQUENCE    
  DisplayString as mplsLspName  
  INTEGER as mplsLspState  
  Counter64 as mplsLspOctets  
  Counter64 as mplsLspPackets  
  TimeStamp as mplsLspAge  
  TimeStamp as mplsLspTimeUp  
  TimeStamp as mplsLspPrimaryTimeUp  
  Counter32 as mplsLspTransitions  
  TimeStamp as mplsLspLastTransition  
  Counter32 as mplsLspPathChanges  
  TimeStamp as mplsLspLastPathChange  
  Integer32 as mplsLspConfiguredPaths  
  Integer32 as mplsLspStandbyPaths  
  Integer32 as mplsLspOperationalPaths  
  IpAddress as mplsLspFrom  
  IpAddress as mplsLspTo  
  DisplayString as mplsPathName  
  INTEGER as mplsPathType  
  OCTET STRING as mplsPathExplicitRoute  
  OCTET STRING as mplsPathRecordRoute  
  Integer32 as mplsPathBandwidth  
  INTEGER as mplsPathCOS  
  Integer32 as mplsPathInclude  
  Integer32 as mplsPathExclude  
  INTEGER as mplsPathSetupPriority  
  INTEGER as mplsPathHoldPriority  
  INTEGER as mplsPathProperties  

MplsLspInfoEntry  
SEQUENCE    
  DisplayString as mplsLspInfoName  
  INTEGER as mplsLspInfoState  
  Counter64 as mplsLspInfoOctets  
  Counter64 as mplsLspInfoPackets  
  TimeStamp as mplsLspInfoAge  
  TimeStamp as mplsLspInfoTimeUp  
  TimeStamp as mplsLspInfoPrimaryTimeUp  
  Counter32 as mplsLspInfoTransitions  
  TimeStamp as mplsLspInfoLastTransition  
  Counter32 as mplsLspInfoPathChanges  
  TimeStamp as mplsLspInfoLastPathChange  
  Integer32 as mplsLspInfoConfiguredPaths  
  Integer32 as mplsLspInfoStandbyPaths  
  Integer32 as mplsLspInfoOperationalPaths  
  IpAddress as mplsLspInfoFrom  
  IpAddress as mplsLspInfoTo  
  DisplayString as mplsPathInfoName  
  INTEGER as mplsPathInfoType  
  OCTET STRING as mplsPathInfoExplicitRoute  
  OCTET STRING as mplsPathInfoRecordRoute  
  Integer32 as mplsPathInfoBandwidth  
  INTEGER as mplsPathInfoCOS  
  Integer32 as mplsPathInfoInclude  
  Integer32 as mplsPathInfoExclude  
  INTEGER as mplsPathInfoSetupPriority  
  INTEGER as mplsPathInfoHoldPriority  
  INTEGER as mplsPathInfoProperties