MRVINREACH

File: MRVINREACH.mib (2040730 bytes)

Imported modules

RFC1155-SMI RFC-1215

Imported symbols

OBJECT-TYPE TimeTicks Gauge
Counter NetworkAddress IpAddress
TRAP-TYPE

Defined Objects

ccitt 0
OBJECT IDENTIFIER    

null 0.0
OBJECT IDENTIFIER    

iso 1
OBJECT IDENTIFIER    

org 1.3
OBJECT IDENTIFIER    

dod 1.3.6
OBJECT IDENTIFIER    

internet 1.3.6.1
OBJECT IDENTIFIER    

directory 1.3.6.1.1
OBJECT IDENTIFIER    

mgmt 1.3.6.1.2
OBJECT IDENTIFIER    

mib-2 1.3.6.1.2.1
OBJECT IDENTIFIER    

system 1.3.6.1.2.1.1
OBJECT IDENTIFIER    

sysDescr 1.3.6.1.2.1.1.1
A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software. It is mandatory that this only contain printable ASCII characters.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

sysObjectID 1.3.6.1.2.1.1.2
The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining `what kind of box' is being managed. For example, if vendor `Flintstones, Inc.' was assigned the subtree 1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

sysUpTime 1.3.6.1.2.1.1.3
The time (in hundredths of a second) since the network management portion of the system was last re-initialized.
OBJECT-TYPE    
  TimeTicks  

sysContact 1.3.6.1.2.1.1.4
The textual identification of the contact person for this managed node, together with information on how to contact this person.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

sysName 1.3.6.1.2.1.1.5
An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

sysLocation 1.3.6.1.2.1.1.6
The physical location of this node (e.g., `telephone closet, 3rd floor').
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

sysServices 1.3.6.1.2.1.1.7
A value which indicates the set of services that this entity primarily offers. The value is a sum. This sum initially takes the value zero, Then, for each layer, L, in the range 1 through 7, that this node performs transactions for, 2 raised to (L - 1) is added to the sum. For example, a node which performs primarily routing functions would have a value of 4 (2^(3-1)). In contrast, a node which is a host offering application services would have a value of 72 (2^(4-1) + 2^(7-1)). Note that in the context of the Internet suite of protocols, values should be calculated accordingly: layer functionality 1 physical (e.g., repeaters) 2 datalink/subnetwork (e.g., bridges) 3 internet (e.g., IP gateways) 4 end-to-end (e.g., IP hosts) 7 applications (e.g., mail relays) For systems including OSI protocols, layers 5 and 6 may also be counted.
OBJECT-TYPE    
  INTEGER 0..127  

interfaces 1.3.6.1.2.1.2
OBJECT IDENTIFIER    

ifNumber 1.3.6.1.2.1.2.1
The number of network interfaces (regardless of their current state) present on this system.
OBJECT-TYPE    
  INTEGER  

ifTable 1.3.6.1.2.1.2.2
A list of interface entries. The number of entries is given by the value of ifNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    IfEntry

ifEntry 1.3.6.1.2.1.2.2.1
An interface entry containing objects at the subnetwork layer and below for a particular interface.
OBJECT-TYPE    
  IfEntry  

ifIndex 1.3.6.1.2.1.2.2.1.1
A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
OBJECT-TYPE    
  INTEGER  

ifDescr 1.3.6.1.2.1.2.2.1.2
A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

ifType 1.3.6.1.2.1.2.2.1.3
The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.
OBJECT-TYPE    
  INTEGER other(1), regular1822(2), hdh1822(3), ddn-x25(4), rfc877-x25(5), ethernet-csmacd(6), iso88023-csmacd(7), iso88024-tokenBus(8), iso88025-tokenRing(9), iso88026-man(10), starLan(11), proteon-10Mbit(12), proteon-80Mbit(13), hyperchannel(14), fddi(15), lapb(16), sdlc(17), ds1(18), e1(19), basicISDN(20), primaryISDN(21), propPointToPointSerial(22), ppp(23), softwareLoopback(24), eon(25), ethernet-3Mbit(26), nsip(27), slip(28), ultra(29), ds3(30), sip(31), frame-relay(32)  

ifMtu 1.3.6.1.2.1.2.2.1.4
The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.
OBJECT-TYPE    
  INTEGER  

ifSpeed 1.3.6.1.2.1.2.2.1.5
An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth.
OBJECT-TYPE    
  Gauge  

ifPhysAddress 1.3.6.1.2.1.2.2.1.6
The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
OBJECT-TYPE    
  PhysAddress  

ifAdminStatus 1.3.6.1.2.1.2.2.1.7
The desired state of the interface. The testing(3) state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

ifOperStatus 1.3.6.1.2.1.2.2.1.8
The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

ifLastChange 1.3.6.1.2.1.2.2.1.9
The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.
OBJECT-TYPE    
  TimeTicks  

ifInOctets 1.3.6.1.2.1.2.2.1.10
The total number of octets received on the interface, including framing characters.
OBJECT-TYPE    
  Counter  

ifInUcastPkts 1.3.6.1.2.1.2.2.1.11
The number of subnetwork-unicast packets delivered to a higher-layer protocol.
OBJECT-TYPE    
  Counter  

ifInNUcastPkts 1.3.6.1.2.1.2.2.1.12
The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.
OBJECT-TYPE    
  Counter  

ifInDiscards 1.3.6.1.2.1.2.2.1.13
The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
OBJECT-TYPE    
  Counter  

ifInErrors 1.3.6.1.2.1.2.2.1.14
The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
OBJECT-TYPE    
  Counter  

ifInUnknownProtos 1.3.6.1.2.1.2.2.1.15
The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.
OBJECT-TYPE    
  Counter  

ifOutOctets 1.3.6.1.2.1.2.2.1.16
The total number of octets transmitted out of the interface, including framing characters.
OBJECT-TYPE    
  Counter  

ifOutUcastPkts 1.3.6.1.2.1.2.2.1.17
The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.
OBJECT-TYPE    
  Counter  

ifOutNUcastPkts 1.3.6.1.2.1.2.2.1.18
The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.
OBJECT-TYPE    
  Counter  

ifOutDiscards 1.3.6.1.2.1.2.2.1.19
The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
OBJECT-TYPE    
  Counter  

ifOutErrors 1.3.6.1.2.1.2.2.1.20
The number of outbound packets that could not be transmitted because of errors.
OBJECT-TYPE    
  Counter  

ifOutQLen 1.3.6.1.2.1.2.2.1.21
The length of the output packet queue (in packets).
OBJECT-TYPE    
  Gauge  

ifSpecific 1.3.6.1.2.1.2.2.1.22
A reference to MIB definitions specific to the particular media being used to realize the interface. For example, if the interface is realized by an ethernet, then the value of this object refers to a document defining objects specific to ethernet. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

at 1.3.6.1.2.1.3
OBJECT IDENTIFIER    

atTable 1.3.6.1.2.1.3.1
The Address Translation tables contain the NetworkAddress to `physical' address equivalences. Some interfaces do not use translation tables for determining address equivalences (e.g., DDN-X.25 has an algorithmic method); if all interfaces are of this type, then the Address Translation table is empty, i.e., has zero entries.
OBJECT-TYPE    
  SEQUENCE OF  
    AtEntry

atEntry 1.3.6.1.2.1.3.1.1
Each entry contains one NetworkAddress to `physical' address equivalence.
OBJECT-TYPE    
  AtEntry  

atIfIndex 1.3.6.1.2.1.3.1.1.1
The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  INTEGER  

atPhysAddress 1.3.6.1.2.1.3.1.1.2
The media-dependent `physical' address. Setting this object to a null string (one of zero length) has the effect of invaliding the corresponding entry in the atTable object. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant atPhysAddress object.
OBJECT-TYPE    
  PhysAddress  

atNetAddress 1.3.6.1.2.1.3.1.1.3
The NetworkAddress (e.g., the IP address) corresponding to the media-dependent `physical' address.
OBJECT-TYPE    
  NetworkAddress  

ip 1.3.6.1.2.1.4
OBJECT IDENTIFIER    

ipForwarding 1.3.6.1.2.1.4.1
The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP gateways forward datagrams. IP hosts do not (except those source-routed via the host). Note that for some managed nodes, this object may take on only a subset of the values possible. Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to change this object to an inappropriate value.
OBJECT-TYPE    
  INTEGER forwarding(1), not-forwarding(2)  

ipDefaultTTL 1.3.6.1.2.1.4.2
The default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the transport layer protocol.
OBJECT-TYPE    
  INTEGER  

ipInReceives 1.3.6.1.2.1.4.3
The total number of input datagrams received from interfaces, including those received in error.
OBJECT-TYPE    
  Counter  

ipInHdrErrors 1.3.6.1.2.1.4.4
The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc.
OBJECT-TYPE    
  Counter  

ipInAddrErrors 1.3.6.1.2.1.4.5
The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., 0.0.0.0) and addresses of unsupported Classes (e.g., Class E). For entities which are not IP Gateways and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address.
OBJECT-TYPE    
  Counter  

ipForwDatagrams 1.3.6.1.2.1.4.6
The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IP Gateways, this counter will include only those packets which were Source-Routed via this entity, and the Source- Route option processing was successful.
OBJECT-TYPE    
  Counter  

ipInUnknownProtos 1.3.6.1.2.1.4.7
The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol.
OBJECT-TYPE    
  Counter  

ipInDiscards 1.3.6.1.2.1.4.8
The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly.
OBJECT-TYPE    
  Counter  

ipInDelivers 1.3.6.1.2.1.4.9
The total number of input datagrams successfully delivered to IP user-protocols (including ICMP).
OBJECT-TYPE    
  Counter  

ipOutRequests 1.3.6.1.2.1.4.10
The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipForwDatagrams.
OBJECT-TYPE    
  Counter  

ipOutDiscards 1.3.6.1.2.1.4.11
The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipForwDatagrams if any such packets met this (discretionary) discard criterion.
OBJECT-TYPE    
  Counter  

ipOutNoRoutes 1.3.6.1.2.1.4.12
The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted in ipForwDatagrams which meet this `no-route' criterion. Note that this includes any datagarms which a host cannot route because all of its default gateways are down.
OBJECT-TYPE    
  Counter  

ipReasmTimeout 1.3.6.1.2.1.4.13
The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity.
OBJECT-TYPE    
  INTEGER  

ipReasmReqds 1.3.6.1.2.1.4.14
The number of IP fragments received which needed to be reassembled at this entity.
OBJECT-TYPE    
  Counter  

ipReasmOKs 1.3.6.1.2.1.4.15
The number of IP datagrams successfully re- assembled.
OBJECT-TYPE    
  Counter  

ipReasmFails 1.3.6.1.2.1.4.16
The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received.
OBJECT-TYPE    
  Counter  

ipFragOKs 1.3.6.1.2.1.4.17
The number of IP datagrams that have been successfully fragmented at this entity.
OBJECT-TYPE    
  Counter  

ipFragFails 1.3.6.1.2.1.4.18
The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment flag was set.
OBJECT-TYPE    
  Counter  

ipFragCreates 1.3.6.1.2.1.4.19
The number of IP datagram fragments that have been generated as a result of fragmentation at this entity.
OBJECT-TYPE    
  Counter  

ipAddrTable 1.3.6.1.2.1.4.20
The table of addressing information relevant to this entity's IP addresses.
OBJECT-TYPE    
  SEQUENCE OF  
    IpAddrEntry

ipAddrEntry 1.3.6.1.2.1.4.20.1
The addressing information for one of this entity's IP addresses.
OBJECT-TYPE    
  IpAddrEntry  

ipAdEntAddr 1.3.6.1.2.1.4.20.1.1
The IP address to which this entry's addressing information pertains.
OBJECT-TYPE    
  IpAddress  

ipAdEntIfIndex 1.3.6.1.2.1.4.20.1.2
The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  INTEGER  

ipAdEntNetMask 1.3.6.1.2.1.4.20.1.3
The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
OBJECT-TYPE    
  IpAddress  

ipAdEntBcastAddr 1.3.6.1.2.1.4.20.1.4
The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface.
OBJECT-TYPE    
  INTEGER  

ipAdEntReasmMaxSize 1.3.6.1.2.1.4.20.1.5
The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.
OBJECT-TYPE    
  INTEGER 0..65535  

ipRouteTable 1.3.6.1.2.1.4.21
This entity's IP Routing table.
OBJECT-TYPE    
  SEQUENCE OF  
    IpRouteEntry

ipRouteEntry 1.3.6.1.2.1.4.21.1
A route to a particular destination.
OBJECT-TYPE    
  IpRouteEntry  

ipRouteDest 1.3.6.1.2.1.4.21.1.1
The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use.
OBJECT-TYPE    
  IpAddress  

ipRouteIfIndex 1.3.6.1.2.1.4.21.1.2
The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  INTEGER  

ipRouteMetric1 1.3.6.1.2.1.4.21.1.3
The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
OBJECT-TYPE    
  INTEGER  

ipRouteMetric2 1.3.6.1.2.1.4.21.1.4
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
OBJECT-TYPE    
  INTEGER  

ipRouteMetric3 1.3.6.1.2.1.4.21.1.5
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
OBJECT-TYPE    
  INTEGER  

ipRouteMetric4 1.3.6.1.2.1.4.21.1.6
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
OBJECT-TYPE    
  INTEGER  

ipRouteNextHop 1.3.6.1.2.1.4.21.1.7
The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)
OBJECT-TYPE    
  IpAddress  

ipRouteType 1.3.6.1.2.1.4.21.1.8
The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipRouteTable object. That is, it effectively dissasociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipRouteType object.
OBJECT-TYPE    
  INTEGER other(1), invalid(2), direct(3), indirect(4)  

ipRouteProto 1.3.6.1.2.1.4.21.1.9
The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
OBJECT-TYPE    
  INTEGER other(1), local(2), netmgmt(3), icmp(4), egp(5), ggp(6), hello(7), rip(8), is-is(9), es-is(10), ciscoIgrp(11), bbnSpfIgp(12), ospf(13), bgp(14)  

ipRouteAge 1.3.6.1.2.1.4.21.1.10
The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.
OBJECT-TYPE    
  INTEGER  

ipRouteMask 1.3.6.1.2.1.4.21.1.11
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipRouteMask by determining whether the value of the correspondent ipRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the ipRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism.
OBJECT-TYPE    
  IpAddress  

ipRouteMetric5 1.3.6.1.2.1.4.21.1.12
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
OBJECT-TYPE    
  INTEGER  

ipRouteInfo 1.3.6.1.2.1.4.21.1.13
A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's ipRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

ipNetToMediaTable 1.3.6.1.2.1.4.22
The IP Address Translation table used for mapping from IP addresses to physical addresses.
OBJECT-TYPE    
  SEQUENCE OF  
    IpNetToMediaEntry

ipNetToMediaEntry 1.3.6.1.2.1.4.22.1
Each entry contains one IpAddress to `physical' address equivalence.
OBJECT-TYPE    
  IpNetToMediaEntry  

ipNetToMediaIfIndex 1.3.6.1.2.1.4.22.1.1
The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  INTEGER  

ipNetToMediaPhysAddress 1.3.6.1.2.1.4.22.1.2
The media-dependent `physical' address.
OBJECT-TYPE    
  PhysAddress  

ipNetToMediaNetAddress 1.3.6.1.2.1.4.22.1.3
The IpAddress corresponding to the media- dependent `physical' address.
OBJECT-TYPE    
  IpAddress  

ipNetToMediaType 1.3.6.1.2.1.4.22.1.4
The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToMediaTable. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipNetToMediaType object.
OBJECT-TYPE    
  INTEGER other(1), invalid(2), dynamic(3), static(4)  

ipRoutingDiscards 1.3.6.1.2.1.4.23
The number of routing entries which were chosen to be discarded even though they are valid. One possible reason for discarding such an entry could be to free-up buffer space for other routing entries.
OBJECT-TYPE    
  Counter  

icmp 1.3.6.1.2.1.5
OBJECT IDENTIFIER    

icmpInMsgs 1.3.6.1.2.1.5.1
The total number of ICMP messages which the entity received. Note that this counter includes all those counted by icmpInErrors.
OBJECT-TYPE    
  Counter  

icmpInErrors 1.3.6.1.2.1.5.2
The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.).
OBJECT-TYPE    
  Counter  

icmpInDestUnreachs 1.3.6.1.2.1.5.3
The number of ICMP Destination Unreachable messages received.
OBJECT-TYPE    
  Counter  

icmpInTimeExcds 1.3.6.1.2.1.5.4
The number of ICMP Time Exceeded messages received.
OBJECT-TYPE    
  Counter  

icmpInParmProbs 1.3.6.1.2.1.5.5
The number of ICMP Parameter Problem messages received.
OBJECT-TYPE    
  Counter  

icmpInSrcQuenchs 1.3.6.1.2.1.5.6
The number of ICMP Source Quench messages received.
OBJECT-TYPE    
  Counter  

icmpInRedirects 1.3.6.1.2.1.5.7
The number of ICMP Redirect messages received.
OBJECT-TYPE    
  Counter  

icmpInEchos 1.3.6.1.2.1.5.8
The number of ICMP Echo (request) messages received.
OBJECT-TYPE    
  Counter  

icmpInEchoReps 1.3.6.1.2.1.5.9
The number of ICMP Echo Reply messages received.
OBJECT-TYPE    
  Counter  

icmpInTimestamps 1.3.6.1.2.1.5.10
The number of ICMP Timestamp (request) messages received.
OBJECT-TYPE    
  Counter  

icmpInTimestampReps 1.3.6.1.2.1.5.11
The number of ICMP Timestamp Reply messages received.
OBJECT-TYPE    
  Counter  

icmpInAddrMasks 1.3.6.1.2.1.5.12
The number of ICMP Address Mask Request messages received.
OBJECT-TYPE    
  Counter  

icmpInAddrMaskReps 1.3.6.1.2.1.5.13
The number of ICMP Address Mask Reply messages received.
OBJECT-TYPE    
  Counter  

icmpOutMsgs 1.3.6.1.2.1.5.14
The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors.
OBJECT-TYPE    
  Counter  

icmpOutErrors 1.3.6.1.2.1.5.15
The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of IP to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value.
OBJECT-TYPE    
  Counter  

icmpOutDestUnreachs 1.3.6.1.2.1.5.16
The number of ICMP Destination Unreachable messages sent.
OBJECT-TYPE    
  Counter  

icmpOutTimeExcds 1.3.6.1.2.1.5.17
The number of ICMP Time Exceeded messages sent.
OBJECT-TYPE    
  Counter  

icmpOutParmProbs 1.3.6.1.2.1.5.18
The number of ICMP Parameter Problem messages sent.
OBJECT-TYPE    
  Counter  

icmpOutSrcQuenchs 1.3.6.1.2.1.5.19
The number of ICMP Source Quench messages sent.
OBJECT-TYPE    
  Counter  

icmpOutRedirects 1.3.6.1.2.1.5.20
The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects.
OBJECT-TYPE    
  Counter  

icmpOutEchos 1.3.6.1.2.1.5.21
The number of ICMP Echo (request) messages sent.
OBJECT-TYPE    
  Counter  

icmpOutEchoReps 1.3.6.1.2.1.5.22
The number of ICMP Echo Reply messages sent.
OBJECT-TYPE    
  Counter  

icmpOutTimestamps 1.3.6.1.2.1.5.23
The number of ICMP Timestamp (request) messages sent.
OBJECT-TYPE    
  Counter  

icmpOutTimestampReps 1.3.6.1.2.1.5.24
The number of ICMP Timestamp Reply messages sent.
OBJECT-TYPE    
  Counter  

icmpOutAddrMasks 1.3.6.1.2.1.5.25
The number of ICMP Address Mask Request messages sent.
OBJECT-TYPE    
  Counter  

icmpOutAddrMaskReps 1.3.6.1.2.1.5.26
The number of ICMP Address Mask Reply messages sent.
OBJECT-TYPE    
  Counter  

tcp 1.3.6.1.2.1.6
OBJECT IDENTIFIER    

tcpRtoAlgorithm 1.3.6.1.2.1.6.1
The algorithm used to determine the timeout value used for retransmitting unacknowledged octets.
OBJECT-TYPE    
  INTEGER other(1), constant(2), rsre(3), vanj(4)  

tcpRtoMin 1.3.6.1.2.1.6.2
The minimum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the LBOUND quantity described in RFC 793.
OBJECT-TYPE    
  INTEGER  

tcpRtoMax 1.3.6.1.2.1.6.3
The maximum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the UBOUND quantity described in RFC 793.
OBJECT-TYPE    
  INTEGER  

tcpMaxConn 1.3.6.1.2.1.6.4
The limit on the total number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should contain the value -1.
OBJECT-TYPE    
  INTEGER  

tcpActiveOpens 1.3.6.1.2.1.6.5
The number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state.
OBJECT-TYPE    
  Counter  

tcpPassiveOpens 1.3.6.1.2.1.6.6
The number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state.
OBJECT-TYPE    
  Counter  

tcpAttemptFails 1.3.6.1.2.1.6.7
The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state.
OBJECT-TYPE    
  Counter  

tcpEstabResets 1.3.6.1.2.1.6.8
The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state.
OBJECT-TYPE    
  Counter  

tcpCurrEstab 1.3.6.1.2.1.6.9
The number of TCP connections for which the current state is either ESTABLISHED or CLOSE- WAIT.
OBJECT-TYPE    
  Gauge  

tcpInSegs 1.3.6.1.2.1.6.10
The total number of segments received, including those received in error. This count includes segments received on currently established connections.
OBJECT-TYPE    
  Counter  

tcpOutSegs 1.3.6.1.2.1.6.11
The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets.
OBJECT-TYPE    
  Counter  

tcpRetransSegs 1.3.6.1.2.1.6.12
The total number of segments retransmitted - that is, the number of TCP segments transmitted containing one or more previously transmitted octets.
OBJECT-TYPE    
  Counter  

tcpConnTable 1.3.6.1.2.1.6.13
A table containing TCP connection-specific information.
OBJECT-TYPE    
  SEQUENCE OF  
    TcpConnEntry

tcpConnEntry 1.3.6.1.2.1.6.13.1
Information about a particular current TCP connection. An object of this type is transient, in that it ceases to exist when (or soon after) the connection makes the transition to the CLOSED state.
OBJECT-TYPE    
  TcpConnEntry  

tcpConnState 1.3.6.1.2.1.6.13.1.1
The state of this TCP connection. The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to set this object to any other value. If a management station sets this object to the value deleteTCB(12), then this has the effect of deleting the TCB (as defined in RFC 793) of the corresponding connection on the managed node, resulting in immediate termination of the connection. As an implementation-specific option, a RST segment may be sent from the managed node to the other TCP endpoint (note however that RST segments are not sent reliably).
OBJECT-TYPE    
  INTEGER closed(1), listen(2), synSent(3), synReceived(4), established(5), finWait1(6), finWait2(7), closeWait(8), lastAck(9), closing(10), timeWait(11), deleteTCB(12)  

tcpConnLocalAddress 1.3.6.1.2.1.6.13.1.2
The local IP address for this TCP connection. In the case of a connection in the listen state which is willing to accept connections for any IP interface associated with the node, the value 0.0.0.0 is used.
OBJECT-TYPE    
  IpAddress  

tcpConnLocalPort 1.3.6.1.2.1.6.13.1.3
The local port number for this TCP connection.
OBJECT-TYPE    
  INTEGER 0..65535  

tcpConnRemAddress 1.3.6.1.2.1.6.13.1.4
The remote IP address for this TCP connection.
OBJECT-TYPE    
  IpAddress  

tcpConnRemPort 1.3.6.1.2.1.6.13.1.5
The remote port number for this TCP connection.
OBJECT-TYPE    
  INTEGER 0..65535  

tcpInErrs 1.3.6.1.2.1.6.14
The total number of segments received in error (e.g., bad TCP checksums).
OBJECT-TYPE    
  Counter  

tcpOutRsts 1.3.6.1.2.1.6.15
The number of TCP segments sent containing the RST flag.
OBJECT-TYPE    
  Counter  

udp 1.3.6.1.2.1.7
OBJECT IDENTIFIER    

udpInDatagrams 1.3.6.1.2.1.7.1
The total number of UDP datagrams delivered to UDP users.
OBJECT-TYPE    
  Counter  

udpNoPorts 1.3.6.1.2.1.7.2
The total number of received UDP datagrams for which there was no application at the destination port.
OBJECT-TYPE    
  Counter  

udpInErrors 1.3.6.1.2.1.7.3
The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port.
OBJECT-TYPE    
  Counter  

udpOutDatagrams 1.3.6.1.2.1.7.4
The total number of UDP datagrams sent from this entity.
OBJECT-TYPE    
  Counter  

udpTable 1.3.6.1.2.1.7.5
A table containing UDP listener information.
OBJECT-TYPE    
  SEQUENCE OF  
    UdpEntry

udpEntry 1.3.6.1.2.1.7.5.1
Information about a particular current UDP listener.
OBJECT-TYPE    
  UdpEntry  

udpLocalAddress 1.3.6.1.2.1.7.5.1.1
The local IP address for this UDP listener. In the case of a UDP listener which is willing to accept datagrams for any IP interface associated with the node, the value 0.0.0.0 is used.
OBJECT-TYPE    
  IpAddress  

udpLocalPort 1.3.6.1.2.1.7.5.1.2
The local port number for this UDP listener.
OBJECT-TYPE    
  INTEGER 0..65535  

egp 1.3.6.1.2.1.8
OBJECT IDENTIFIER    

egpInMsgs 1.3.6.1.2.1.8.1
The number of EGP messages received without error.
OBJECT-TYPE    
  Counter  

egpInErrors 1.3.6.1.2.1.8.2
The number of EGP messages received that proved to be in error.
OBJECT-TYPE    
  Counter  

egpOutMsgs 1.3.6.1.2.1.8.3
The total number of locally generated EGP messages.
OBJECT-TYPE    
  Counter  

egpOutErrors 1.3.6.1.2.1.8.4
The number of locally generated EGP messages not sent due to resource limitations within an EGP entity.
OBJECT-TYPE    
  Counter  

egpNeighTable 1.3.6.1.2.1.8.5
The EGP neighbor table.
OBJECT-TYPE    
  SEQUENCE OF  
    EgpNeighEntry

egpNeighEntry 1.3.6.1.2.1.8.5.1
Information about this entity's relationship with a particular EGP neighbor.
OBJECT-TYPE    
  EgpNeighEntry  

egpNeighState 1.3.6.1.2.1.8.5.1.1
The EGP state of the local system with respect to this entry's EGP neighbor. Each EGP state is represented by a value that is one greater than the numerical value associated with said state in RFC 904.
OBJECT-TYPE    
  INTEGER idle(1), acquisition(2), down(3), up(4), cease(5)  

egpNeighAddr 1.3.6.1.2.1.8.5.1.2
The IP address of this entry's EGP neighbor.
OBJECT-TYPE    
  IpAddress  

egpNeighAs 1.3.6.1.2.1.8.5.1.3
The autonomous system of this EGP peer. Zero should be specified if the autonomous system number of the neighbor is not yet known.
OBJECT-TYPE    
  INTEGER  

egpNeighInMsgs 1.3.6.1.2.1.8.5.1.4
The number of EGP messages received without error from this EGP peer.
OBJECT-TYPE    
  Counter  

egpNeighInErrs 1.3.6.1.2.1.8.5.1.5
The number of EGP messages received from this EGP peer that proved to be in error (e.g., bad EGP checksum).
OBJECT-TYPE    
  Counter  

egpNeighOutMsgs 1.3.6.1.2.1.8.5.1.6
The number of locally generated EGP messages to this EGP peer.
OBJECT-TYPE    
  Counter  

egpNeighOutErrs 1.3.6.1.2.1.8.5.1.7
The number of locally generated EGP messages not sent to this EGP peer due to resource limitations within an EGP entity.
OBJECT-TYPE    
  Counter  

egpNeighInErrMsgs 1.3.6.1.2.1.8.5.1.8
The number of EGP-defined error messages received from this EGP peer.
OBJECT-TYPE    
  Counter  

egpNeighOutErrMsgs 1.3.6.1.2.1.8.5.1.9
The number of EGP-defined error messages sent to this EGP peer.
OBJECT-TYPE    
  Counter  

egpNeighStateUps 1.3.6.1.2.1.8.5.1.10
The number of EGP state transitions to the UP state with this EGP peer.
OBJECT-TYPE    
  Counter  

egpNeighStateDowns 1.3.6.1.2.1.8.5.1.11
The number of EGP state transitions from the UP state to any other state with this EGP peer.
OBJECT-TYPE    
  Counter  

egpNeighIntervalHello 1.3.6.1.2.1.8.5.1.12
The interval between EGP Hello command retransmissions (in hundredths of a second). This represents the t1 timer as defined in RFC 904.
OBJECT-TYPE    
  INTEGER  

egpNeighIntervalPoll 1.3.6.1.2.1.8.5.1.13
The interval between EGP poll command retransmissions (in hundredths of a second). This represents the t3 timer as defined in RFC 904.
OBJECT-TYPE    
  INTEGER  

egpNeighMode 1.3.6.1.2.1.8.5.1.14
The polling mode of this EGP entity, either passive or active.
OBJECT-TYPE    
  INTEGER active(1), passive(2)  

egpNeighEventTrigger 1.3.6.1.2.1.8.5.1.15
A control variable used to trigger operator- initiated Start and Stop events. When read, this variable always returns the most recent value that egpNeighEventTrigger was set to. If it has not been set since the last initialization of the network management subsystem on the node, it returns a value of `stop'. When set, this variable causes a Start or Stop event on the specified neighbor, as specified on pages 8-10 of RFC 904. Briefly, a Start event causes an Idle peer to begin neighbor acquisition and a non-Idle peer to reinitiate neighbor acquisition. A stop event causes a non-Idle peer to return to the Idle state until a Start event occurs, either via egpNeighEventTrigger or otherwise.
OBJECT-TYPE    
  INTEGER start(1), stop(2)  

egpAs 1.3.6.1.2.1.8.6
The autonomous system number of this EGP entity.
OBJECT-TYPE    
  INTEGER  

transmission 1.3.6.1.2.1.10
OBJECT IDENTIFIER    

ppp 1.3.6.1.2.1.10.23
OBJECT IDENTIFIER    

pppLcp 1.3.6.1.2.1.10.23.1
OBJECT IDENTIFIER    


pppLinkStatusTable 1.3.6.1.2.1.10.23.1.1.1
A table containing PPP-link specific variables for this PPP implementation.
OBJECT-TYPE    
  SEQUENCE OF  
    PppLinkStatusEntry

pppLinkStatusEntry 1.3.6.1.2.1.10.23.1.1.1.1
Management information about a particular PPP Link.
OBJECT-TYPE    
  PppLinkStatusEntry  

pppLinkStatusPhysicalIndex 1.3.6.1.2.1.10.23.1.1.1.1.1
The value of ifIndex that identifies the lower-level interface over which this PPP Link is operating. This interface would usually be an HDLC or RS-232 type of interface. If there is no lower-layer interface element, or there is no ifEntry for the element, or the element can not be identified, then the value of this object is 0. For example, suppose that PPP is operating over a serial port. This would use two entries in the ifTable. The PPP could be running over `interface' number 123 and the serial port could be running over `interface' number 987. Therefore, ifSpecific.123 would contain the OBJECT IDENTIFIER ppp pppLinkStatusPhysicalIndex.123 would contain 987, and ifSpecific.987 would contain the OBJECT IDENTIFIER for the serial-port's media- specific MIB.
OBJECT-TYPE    
  INTEGER 0..2147483647  

pppLinkStatusBadAddresses 1.3.6.1.2.1.10.23.1.1.1.1.2
The number of packets received with an incorrect Address Field. This counter is a component of the ifInErrors variable that is associated with the interface that represents this PPP Link.
OBJECT-TYPE    
  Counter  

pppLinkStatusBadControls 1.3.6.1.2.1.10.23.1.1.1.1.3
The number of packets received on this link with an incorrect Control Field. This counter is a component of the ifInErrors variable that is associated with the interface that represents this PPP Link.
OBJECT-TYPE    
  Counter  

pppLinkStatusPacketTooLongs 1.3.6.1.2.1.10.23.1.1.1.1.4
The number of received packets that have been discarded because their length exceeded the MRU. This counter is a component of the ifInErrors variable that is associated with the interface that represents this PPP Link. NOTE, packets which are longer than the MRU but which are successfully received and processed are NOT included in this count.
OBJECT-TYPE    
  Counter  

pppLinkStatusBadFCSs 1.3.6.1.2.1.10.23.1.1.1.1.5
The number of received packets that have been discarded due to having an incorrect FCS. This counter is a component of the ifInErrors variable that is associated with the interface that represents this PPP Link.
OBJECT-TYPE    
  Counter  

pppLinkStatusLocalMRU 1.3.6.1.2.1.10.23.1.1.1.1.6
The current value of the MRU for the local PPP Entity. This value is the MRU that the remote entity is using when sending packets to the local PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up).
OBJECT-TYPE    
  INTEGER 1..2147483648  

pppLinkStatusRemoteMRU 1.3.6.1.2.1.10.23.1.1.1.1.7
The current value of the MRU for the remote PPP Entity. This value is the MRU that the local entity is using when sending packets to the remote PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up).
OBJECT-TYPE    
  INTEGER 1..2147483648  

pppLinkStatusLocalToPeerACCMap 1.3.6.1.2.1.10.23.1.1.1.1.8
The current value of the ACC Map used for sending packets from the local PPP entity to the remote PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up).
OBJECT-TYPE    
  OCTET STRING SIZE(4)  

pppLinkStatusPeerToLocalACCMap 1.3.6.1.2.1.10.23.1.1.1.1.9
The ACC Map used by the remote PPP entity when transmitting packets to the local PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up).
OBJECT-TYPE    
  OCTET STRING SIZE(4)  

pppLinkStatusLocalToRemoteProtocolCompression 1.3.6.1.2.1.10.23.1.1.1.1.10
Indicates whether the local PPP entity will use Protocol Compression when transmitting packets to the remote PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

pppLinkStatusRemoteToLocalProtocolCompression 1.3.6.1.2.1.10.23.1.1.1.1.11
Indicates whether the remote PPP entity will use Protocol Compression when transmitting packets to the local PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

pppLinkStatusLocalToRemoteACCompression 1.3.6.1.2.1.10.23.1.1.1.1.12
Indicates whether the local PPP entity will use Address and Control Compression when transmitting packets to the remote PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

pppLinkStatusRemoteToLocalACCompression 1.3.6.1.2.1.10.23.1.1.1.1.13
Indicates whether the remote PPP entity will use Address and Control Compression when transmitting packets to the local PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

pppLinkStatusTransmitFcsSize 1.3.6.1.2.1.10.23.1.1.1.1.14
The size of the Frame Check Sequence (FCS) in bits that the local node will generate when sending packets to the remote node. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up).
OBJECT-TYPE    
  INTEGER 0..128  

pppLinkStatusReceiveFcsSize 1.3.6.1.2.1.10.23.1.1.1.1.15
The size of the Frame Check Sequence (FCS) in bits that the remote node will generate when sending packets to the local node. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up).
OBJECT-TYPE    
  INTEGER 0..128  

pppLinkConfigTable 1.3.6.1.2.1.10.23.1.1.2
A table containing the LCP configuration parameters for this PPP Link. These variables represent the initial configuration of the PPP Link. The actual values of the parameters may be changed when the link is brought up via the LCP options negotiation mechanism.
OBJECT-TYPE    
  SEQUENCE OF  
    PppLinkConfigEntry

pppLinkConfigEntry 1.3.6.1.2.1.10.23.1.1.2.1
Configuration information about a particular PPP Link.
OBJECT-TYPE    
  PppLinkConfigEntry  

pppLinkConfigInitialMRU 1.3.6.1.2.1.10.23.1.1.2.1.1
The initial Maximum Receive Unit (MRU) that the local PPP entity will advertise to the remote entity. If the value of this variable is 0 then the local PPP entity will not advertise any MRU to the remote entity and the default MRU will be assumed. Changing this object will have effect when the link is next restarted. Agent variations: DESCRIPTION writing not supported
OBJECT-TYPE    
  INTEGER 0..2147483647  

pppLinkConfigReceiveACCMap 1.3.6.1.2.1.10.23.1.1.2.1.2
The Asynchronous-Control-Character-Map (ACC) that the local PPP entity requires for use on its receive side. In effect, this is the ACC Map that is required in order to ensure that the local modem will successfully receive all characters. The actual ACC map used on the receive side of the link will be a combination of the local node's pppLinkConfigReceiveACCMap and the remote node's pppLinkConfigTransmitACCMap. Changing this object will have effect when the link is next restarted.
OBJECT-TYPE    
  OCTET STRING SIZE(4)  

pppLinkConfigTransmitACCMap 1.3.6.1.2.1.10.23.1.1.2.1.3
The Asynchronous-Control-Character-Map (ACC) that the local PPP entity requires for use on its transmit side. In effect, this is the ACC Map that is required in order to ensure that all characters can be successfully transmitted through the local modem. The actual ACC map used on the transmit side of the link will be a combination of the local node's pppLinkConfigTransmitACCMap and the remote node's pppLinkConfigReceiveACCMap. Changing this object will have effect when the link is next restarted. Agent variations: DESCRIPTION writing not supported
OBJECT-TYPE    
  OCTET STRING SIZE(4)  

pppLinkConfigMagicNumber 1.3.6.1.2.1.10.23.1.1.2.1.4
If true(2) then the local node will attempt to perform Magic Number negotiation with the remote node. If false(1) then this negotiation is not performed. In any event, the local node will comply with any magic number negotiations attempted by the remote node, per the PPP specification. Changing this object will have effect when the link is next restarted. Agent variations: DESCRIPTION writing not supported
OBJECT-TYPE    
  INTEGER false(1), true(2)  

pppLinkConfigFcsSize 1.3.6.1.2.1.10.23.1.1.2.1.5
The size of the FCS, in bits, the local node will attempt to negotiate for use with the remote node. Regardless of the value of this object, the local node will comply with any FCS size negotiations initiated by the remote node, per the PPP specification. Changing this object will have effect when the link is next restarted. Agent variations: DESCRIPTION writing not supported
OBJECT-TYPE    
  INTEGER 0..128  

pppLqr 1.3.6.1.2.1.10.23.1.2
OBJECT IDENTIFIER    

pppTests 1.3.6.1.2.1.10.23.1.3
OBJECT IDENTIFIER    

pppEchoTest 1.3.6.1.2.1.10.23.1.3.1
OBJECT IDENTIFIER    

pppDiscardTest 1.3.6.1.2.1.10.23.1.3.2
OBJECT IDENTIFIER    

pppIp 1.3.6.1.2.1.10.23.3
OBJECT IDENTIFIER    

pppIpTable 1.3.6.1.2.1.10.23.3.1
Table containing the IP parameters and statistics for the local PPP entity.
OBJECT-TYPE    
  SEQUENCE OF  
    PppIpEntry

pppIpEntry 1.3.6.1.2.1.10.23.3.1.1
IPCP status information for a particular PPP link.
OBJECT-TYPE    
  PppIpEntry  

pppIpOperStatus 1.3.6.1.2.1.10.23.3.1.1.1
The operational status of the IP network protocol. If the value of this object is up then the finite state machine for the IP network protocol has reached the Opened state.
OBJECT-TYPE    
  INTEGER opened(1), not-opened(2)  

pppIpLocalToRemoteCompressionProtocol 1.3.6.1.2.1.10.23.3.1.1.2
The IP compression protocol that the local PPP-IP entity uses when sending packets to the remote PPP-IP entity. The value of this object is meaningful only when the link has reached the open state (pppIpOperStatus is opened).
OBJECT-TYPE    
  INTEGER none(1), vj-tcp(2)  

pppIpRemoteToLocalCompressionProtocol 1.3.6.1.2.1.10.23.3.1.1.3
The IP compression protocol that the remote PPP-IP entity uses when sending packets to the local PPP-IP entity. The value of this object is meaningful only when the link has reached the open state (pppIpOperStatus is opened).
OBJECT-TYPE    
  INTEGER none(1), vj-tcp(2)  

pppIpRemoteMaxSlotId 1.3.6.1.2.1.10.23.3.1.1.4
The Max-Slot-Id parameter that the remote node has advertised and that is in use on the link. If vj-tcp header compression is not in use on the link then the value of this object shall be 0. The value of this object is meaningful only when the link has reached the open state (pppIpOperStatus is opened).
OBJECT-TYPE    
  INTEGER 0..255  

pppIpLocalMaxSlotId 1.3.6.1.2.1.10.23.3.1.1.5
The Max-Slot-Id parameter that the local node has advertised and that is in use on the link. If vj-tcp header compression is not in use on the link then the value of this object shall be 0. The value of this object is meaningful only when the link has reached the open state (pppIpOperStatus is opened).
OBJECT-TYPE    
  INTEGER 0..255  

pppIpConfigTable 1.3.6.1.2.1.10.23.3.2
Table containing configuration variables for the IPCP for the local PPP entity.
OBJECT-TYPE    
  SEQUENCE OF  
    PppIpConfigEntry

pppIpConfigEntry 1.3.6.1.2.1.10.23.3.2.1
IPCP information for a particular PPP link.
OBJECT-TYPE    
  PppIpConfigEntry  

pppIpConfigAdminStatus 1.3.6.1.2.1.10.23.3.2.1.1
The immediate desired status of the IP network protocol. Setting this object to open will inject an administrative open event into the IP network protocol's finite state machine. Setting this object to close will inject an administrative close event into the IP network protocol's finite state machine. Agent variations: DESCRIPTION writing not supported
OBJECT-TYPE    
  INTEGER open(1), close(2)  

pppIpConfigCompression 1.3.6.1.2.1.10.23.3.2.1.2
If none(1) then the local node will not attempt to negotiate any IP Compression option. Otherwise, the local node will attempt to negotiate compression mode indicated by the enumerated value. Changing this object will have effect when the link is next restarted.
OBJECT-TYPE    
  INTEGER none(1), vj-tcp(2)  

rs232 1.3.6.1.2.1.10.33
OBJECT IDENTIFIER    

rs232Number 1.3.6.1.2.1.10.33.1
The number of ports (regardless of their current state) in the RS-232-like general port table.
OBJECT-TYPE    
  INTEGER  

rs232PortTable 1.3.6.1.2.1.10.33.2
A list of port entries. The number of entries is given by the value of rs232Number.
OBJECT-TYPE    
  SEQUENCE OF  
    Rs232PortEntry

rs232PortEntry 1.3.6.1.2.1.10.33.2.1
Status and parameter values for a port.
OBJECT-TYPE    
  Rs232PortEntry  

rs232PortIndex 1.3.6.1.2.1.10.33.2.1.1
A unique value for each port. Its value ranges between 1 and the value of rs232Number. By convention and if possible, hardware port numbers map directly to external connectors. The value for each port must remain constant at least from one re-initialization of the network management agent to the next.
OBJECT-TYPE    
  INTEGER  

rs232PortType 1.3.6.1.2.1.10.33.2.1.2
The port's hardware type.
OBJECT-TYPE    
  INTEGER other(1), rs232(2), rs422(3), rs423(4), v35(5)  

rs232PortInSigNumber 1.3.6.1.2.1.10.33.2.1.3
The number of input signals for the port in the input signal table (rs232PortInSigTable). The table contains entries only for those signals the software can detect.
OBJECT-TYPE    
  INTEGER  

rs232PortOutSigNumber 1.3.6.1.2.1.10.33.2.1.4
The number of output signals for the port in the output signal table (rs232PortOutSigTable). The table contains entries only for those signals the software can assert.
OBJECT-TYPE    
  INTEGER  

rs232PortInSpeed 1.3.6.1.2.1.10.33.2.1.5
The port's input speed in bits per second.
OBJECT-TYPE    
  INTEGER  

rs232PortOutSpeed 1.3.6.1.2.1.10.33.2.1.6
The port's output speed in bits per second.
OBJECT-TYPE    
  INTEGER  

rs232AsyncPortTable 1.3.6.1.2.1.10.33.3
A list of asynchronous port entries. The maximum entry number is given by the value of rs232Number. Entries need not exist for synchronous ports.
OBJECT-TYPE    
  SEQUENCE OF  
    Rs232AsyncPortEntry

rs232AsyncPortEntry 1.3.6.1.2.1.10.33.3.1
Status and parameter values for an asynchronous port.
OBJECT-TYPE    
  Rs232AsyncPortEntry  

rs232AsyncPortIndex 1.3.6.1.2.1.10.33.3.1.1
A unique value for each port. Its value is the same as rs232PortIndex for the port.
OBJECT-TYPE    
  INTEGER  

rs232AsyncPortBits 1.3.6.1.2.1.10.33.3.1.2
The port's number of bits in a character.
OBJECT-TYPE    
  INTEGER 5..8  

rs232AsyncPortStopBits 1.3.6.1.2.1.10.33.3.1.3
The port's number of stop bits.
OBJECT-TYPE    
  INTEGER one(1), two(2), one-and-half(3), dynamic(4)  

rs232AsyncPortParity 1.3.6.1.2.1.10.33.3.1.4
The port's sense of a character parity bit.
OBJECT-TYPE    
  INTEGER none(1), odd(2), even(3), mark(4), space(5)  

rs232AsyncPortAutobaud 1.3.6.1.2.1.10.33.3.1.5
A control for the port's ability to automatically sense input speed. When rs232PortAutoBaud is 'enabled', a port may autobaud to values different from the set values for speed, parity, and character size. As a result a network management system may temporarily observe values different from what was previously set.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

rs232AsyncPortParityErrs 1.3.6.1.2.1.10.33.3.1.6
Total number of characters with a parity error, input from the port since system re-initialization and while the port state was 'up' or 'test'.
OBJECT-TYPE    
  Counter  

rs232AsyncPortFramingErrs 1.3.6.1.2.1.10.33.3.1.7
Total number of characters with a framing error, input from the port since system re-initialization and while the port state was 'up' or 'test'.
OBJECT-TYPE    
  Counter  

rs232AsyncPortOverrunErrs 1.3.6.1.2.1.10.33.3.1.8
Total number of characters with an overrun error, input from the port since system re-initialization and while the port state was 'up' or 'test'.
OBJECT-TYPE    
  Counter  

rs232SyncPortTable 1.3.6.1.2.1.10.33.4
A list of synchronous port entries. The maximum entry number is given by the value of rs232Number. Entries need not exist for asynchronous ports.
OBJECT-TYPE    
  SEQUENCE OF  
    Rs232SyncPortEntry

rs232SyncPortEntry 1.3.6.1.2.1.10.33.4.1
Status and parameter values for a synchronous port.
OBJECT-TYPE    
  Rs232SyncPortEntry  

rs232SyncPortIndex 1.3.6.1.2.1.10.33.4.1.1
A unique value for each port. Its value is the same as rs232PortIndex for the port.
OBJECT-TYPE    
  INTEGER  

rs232SyncPortClockSource 1.3.6.1.2.1.10.33.4.1.2
Source of the port's bit rate clock. 'split' means the tranmit clock is internal and the receive clock is external.
OBJECT-TYPE    
  INTEGER internal(1), external(2), split(3)  

rs232SyncPortFrameCheckErrs 1.3.6.1.2.1.10.33.4.1.3
Total number of frames with an invalid frame check sequence, input from the port since system re-initialization and while the port state was 'up' or 'test'.
OBJECT-TYPE    
  Counter  

rs232SyncPortTransmitUnderrunErrs 1.3.6.1.2.1.10.33.4.1.4
Total number of frames that failed to be transmitted on the port since system re-initialization and while the port state was 'up' or 'test' because data was not available to the transmitter in time.
OBJECT-TYPE    
  Counter  

rs232SyncPortReceiveOverrunErrs 1.3.6.1.2.1.10.33.4.1.5
Total number of frames that failed to be received on the port since system re-initialization and while the port state was 'up' or 'test' because the receiver did not accept the data in time.
OBJECT-TYPE    
  Counter  

rs232SyncPortInterruptedFrames 1.3.6.1.2.1.10.33.4.1.6
Total number of frames that failed to be received or transmitted on the port due to loss of modem signals since system re-initialization and while the port state was 'up' or 'test'.
OBJECT-TYPE    
  Counter  

rs232SyncPortAbortedFrames 1.3.6.1.2.1.10.33.4.1.7
Number of frames aborted on the port due to receiving an abort sequence since system re-initialization and while the port state was 'up' or 'test'.
OBJECT-TYPE    
  Counter  

rs232InSigTable 1.3.6.1.2.1.10.33.5
A list of port input control signal entries.
OBJECT-TYPE    
  SEQUENCE OF  
    Rs232InSigEntry

rs232InSigEntry 1.3.6.1.2.1.10.33.5.1
Input control signal status for a hardware port.
OBJECT-TYPE    
  Rs232InSigEntry  

rs232InSigPortIndex 1.3.6.1.2.1.10.33.5.1.1
The value of rs232PortIndex for the port to which this entry belongs.
OBJECT-TYPE    
  INTEGER  

rs232InSigName 1.3.6.1.2.1.10.33.5.1.2
Identification of a hardware signal, as follows: rts Request to Send cts Clear to Send dsr Data Set Ready dtr Data Terminal Ready ri Ring Indicator dcd Received Line Signal Detector sq Signal Quality Detector srs Data Signaling Rate Selector srts Secondary Request to Send scts Secondary Clear to Send sdcd Secondary Received Line Signal Detector
OBJECT-TYPE    
  INTEGER rts(1), cts(2), dsr(3), dtr(4), ri(5), dcd(6), sq(7), srs(8), srts(9), scts(10), sdcd(11)  

rs232InSigState 1.3.6.1.2.1.10.33.5.1.3
The current signal state.
OBJECT-TYPE    
  INTEGER none(1), on(2), off(3)  

rs232InSigChanges 1.3.6.1.2.1.10.33.5.1.4
The number of times the signal has changed from 'on' to 'off' or from 'off' to 'on'.
OBJECT-TYPE    
  Counter  

rs232OutSigTable 1.3.6.1.2.1.10.33.6
A list of port output control signal entries.
OBJECT-TYPE    
  SEQUENCE OF  
    Rs232OutSigEntry

rs232OutSigEntry 1.3.6.1.2.1.10.33.6.1
Output control signal status for a hardware port.
OBJECT-TYPE    
  Rs232OutSigEntry  

rs232OutSigPortIndex 1.3.6.1.2.1.10.33.6.1.1
The value of rs232PortIndex for the port to which this entry belongs.
OBJECT-TYPE    
  INTEGER  

rs232OutSigName 1.3.6.1.2.1.10.33.6.1.2
Identification of a hardware signal, as follows: rts Request to Send cts Clear to Send dsr Data Set Ready dtr Data Terminal Ready ri Ring Indicator dcd Received Line Signal Detector sq Signal Quality Detector srs Data Signaling Rate Selector srts Secondary Request to Send scts Secondary Clear to Send sdcd Secondary Received Line Signal Detector
OBJECT-TYPE    
  INTEGER rts(1), cts(2), dsr(3), dtr(4), ri(5), dcd(6), sq(7), srs(8), srts(9), scts(10), sdcd(11)  

rs232OutSigState 1.3.6.1.2.1.10.33.6.1.3
The current signal state.
OBJECT-TYPE    
  INTEGER none(1), on(2), off(3)  

rs232OutSigChanges 1.3.6.1.2.1.10.33.6.1.4
The number of times the signal has changed from 'on' to 'off' or from 'off' to 'on'.
OBJECT-TYPE    
  Counter  

snmp 1.3.6.1.2.1.11
OBJECT IDENTIFIER    

snmpInPkts 1.3.6.1.2.1.11.1
The total number of Messages delivered to the SNMP entity from the transport service.
OBJECT-TYPE    
  Counter  

snmpOutPkts 1.3.6.1.2.1.11.2
The total number of SNMP Messages which were passed from the SNMP protocol entity to the transport service.
OBJECT-TYPE    
  Counter  

snmpInBadVersions 1.3.6.1.2.1.11.3
The total number of SNMP Messages which were delivered to the SNMP protocol entity and were for an unsupported SNMP version.
OBJECT-TYPE    
  Counter  

snmpInBadCommunityNames 1.3.6.1.2.1.11.4
The total number of SNMP Messages delivered to the SNMP protocol entity which used a SNMP community name not known to said entity.
OBJECT-TYPE    
  Counter  

snmpInBadCommunityUses 1.3.6.1.2.1.11.5
The total number of SNMP Messages delivered to the SNMP protocol entity which represented an SNMP operation which was not allowed by the SNMP community named in the Message.
OBJECT-TYPE    
  Counter  

snmpInASNParseErrs 1.3.6.1.2.1.11.6
The total number of ASN.1 or BER errors encountered by the SNMP protocol entity when decoding received SNMP Messages.
OBJECT-TYPE    
  Counter  

snmpInTooBigs 1.3.6.1.2.1.11.8
The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `tooBig'.
OBJECT-TYPE    
  Counter  

snmpInNoSuchNames 1.3.6.1.2.1.11.9
The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `noSuchName'.
OBJECT-TYPE    
  Counter  

snmpInBadValues 1.3.6.1.2.1.11.10
The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `badValue'.
OBJECT-TYPE    
  Counter  

snmpInReadOnlys 1.3.6.1.2.1.11.11
The total number valid SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `readOnly'. It should be noted that it is a protocol error to generate an SNMP PDU which contains the value `readOnly' in the error-status field, as such this object is provided as a means of detecting incorrect implementations of the SNMP.
OBJECT-TYPE    
  Counter  

snmpInGenErrs 1.3.6.1.2.1.11.12
The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `genErr'.
OBJECT-TYPE    
  Counter  

snmpInTotalReqVars 1.3.6.1.2.1.11.13
The total number of MIB objects which have been retrieved successfully by the SNMP protocol entity as the result of receiving valid SNMP Get-Request and Get-Next PDUs.
OBJECT-TYPE    
  Counter  

snmpInTotalSetVars 1.3.6.1.2.1.11.14
The total number of MIB objects which have been altered successfully by the SNMP protocol entity as the result of receiving valid SNMP Set-Request PDUs.
OBJECT-TYPE    
  Counter  

snmpInGetRequests 1.3.6.1.2.1.11.15
The total number of SNMP Get-Request PDUs which have been accepted and processed by the SNMP protocol entity.
OBJECT-TYPE    
  Counter  

snmpInGetNexts 1.3.6.1.2.1.11.16
The total number of SNMP Get-Next PDUs which have been accepted and processed by the SNMP protocol entity.
OBJECT-TYPE    
  Counter  

snmpInSetRequests 1.3.6.1.2.1.11.17
The total number of SNMP Set-Request PDUs which have been accepted and processed by the SNMP protocol entity.
OBJECT-TYPE    
  Counter  

snmpInGetResponses 1.3.6.1.2.1.11.18
The total number of SNMP Get-Response PDUs which have been accepted and processed by the SNMP protocol entity.
OBJECT-TYPE    
  Counter  

snmpInTraps 1.3.6.1.2.1.11.19
The total number of SNMP Trap PDUs which have been accepted and processed by the SNMP protocol entity.
OBJECT-TYPE    
  Counter  

snmpOutTooBigs 1.3.6.1.2.1.11.20
The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `tooBig.'
OBJECT-TYPE    
  Counter  

snmpOutNoSuchNames 1.3.6.1.2.1.11.21
The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status is `noSuchName'.
OBJECT-TYPE    
  Counter  

snmpOutBadValues 1.3.6.1.2.1.11.22
The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `badValue'.
OBJECT-TYPE    
  Counter  

snmpOutGenErrs 1.3.6.1.2.1.11.24
The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `genErr'.
OBJECT-TYPE    
  Counter  

snmpOutGetRequests 1.3.6.1.2.1.11.25
The total number of SNMP Get-Request PDUs which have been generated by the SNMP protocol entity.
OBJECT-TYPE    
  Counter  

snmpOutGetNexts 1.3.6.1.2.1.11.26
The total number of SNMP Get-Next PDUs which have been generated by the SNMP protocol entity.
OBJECT-TYPE    
  Counter  

snmpOutSetRequests 1.3.6.1.2.1.11.27
The total number of SNMP Set-Request PDUs which have been generated by the SNMP protocol entity.
OBJECT-TYPE    
  Counter  

snmpOutGetResponses 1.3.6.1.2.1.11.28
The total number of SNMP Get-Response PDUs which have been generated by the SNMP protocol entity.
OBJECT-TYPE    
  Counter  

snmpOutTraps 1.3.6.1.2.1.11.29
The total number of SNMP Trap PDUs which have been generated by the SNMP protocol entity.
OBJECT-TYPE    
  Counter  

snmpEnableAuthenTraps 1.3.6.1.2.1.11.30
Indicates whether the SNMP agent process is permitted to generate authentication-failure traps. The value of this object overrides any configuration information; as such, it provides a means whereby all authentication-failure traps may be disabled. Note that it is strongly recommended that this object be stored in non-volatile memory so that it remains constant between re-initializations of the network management system.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

appletalk 1.3.6.1.2.1.13
OBJECT IDENTIFIER    

llap 1.3.6.1.2.1.13.1
OBJECT IDENTIFIER    

aarp 1.3.6.1.2.1.13.2
OBJECT IDENTIFIER    

atport 1.3.6.1.2.1.13.3
OBJECT IDENTIFIER    

ddp 1.3.6.1.2.1.13.4
OBJECT IDENTIFIER    

rtmp 1.3.6.1.2.1.13.5
OBJECT IDENTIFIER    

kip 1.3.6.1.2.1.13.6
OBJECT IDENTIFIER    

zip 1.3.6.1.2.1.13.7
OBJECT IDENTIFIER    

nbp 1.3.6.1.2.1.13.8
OBJECT IDENTIFIER    

atecho 1.3.6.1.2.1.13.9
OBJECT IDENTIFIER    

ospf 1.3.6.1.2.1.14
OBJECT IDENTIFIER    

ospfGeneralGroup 1.3.6.1.2.1.14.1
OBJECT IDENTIFIER    

dot1dBridge 1.3.6.1.2.1.17
OBJECT IDENTIFIER    

dot1dBase 1.3.6.1.2.1.17.1
OBJECT IDENTIFIER    

newRoot 1.3.6.1.2.1.17.1
The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new root, e.g., upon expiration of the Topology Change Timer immediately subsequent to its election. Implementation of this trap is optional.
TRAP-TYPE    

dot1dBaseBridgeAddress 1.3.6.1.2.1.17.1.1
The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenated with dot1dStpPriority a unique BridgeIdentifier is formed which is used in the Spanning Tree Protocol.
OBJECT-TYPE    
  MacAddress  

dot1dBaseNumPorts 1.3.6.1.2.1.17.1.2
The number of ports controlled by this bridging entity.
OBJECT-TYPE    
  INTEGER  

dot1dBaseType 1.3.6.1.2.1.17.1.3
Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the port table for the given type.
OBJECT-TYPE    
  INTEGER unknown(1), transparent-only(2), sourceroute-only(3), srt(4)  

dot1dBasePortTable 1.3.6.1.2.1.17.1.4
A table that contains generic information about every port that is associated with this bridge. Transparent, source-route, and srt ports are included.
OBJECT-TYPE    
  SEQUENCE OF  
    Dot1dBasePortEntry

dot1dBasePortEntry 1.3.6.1.2.1.17.1.4.1
A list of information for each port of the bridge.
OBJECT-TYPE    
  Dot1dBasePortEntry  

dot1dBasePort 1.3.6.1.2.1.17.1.4.1.1
The port number of the port for which this entry contains bridge management information.
OBJECT-TYPE    
  INTEGER 1..65535  

dot1dBasePortIfIndex 1.3.6.1.2.1.17.1.4.1.2
The value of the instance of the ifIndex object, defined in MIB-II, for the interface corresponding to this port.
OBJECT-TYPE    
  INTEGER  

dot1dBasePortCircuit 1.3.6.1.2.1.17.1.4.1.3
For a port which (potentially) has the same value of dot1dBasePortIfIndex as another port on the same bridge, this object contains the name of an object instance unique to this port. For example, in the case where multiple ports correspond one- to-one with multiple X.25 virtual circuits, this value might identify an (e.g., the first) object instance associated with the X.25 virtual circuit corresponding to this port. For a port which has a unique value of dot1dBasePortIfIndex, this object can have the value { 0 0 }.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

dot1dBasePortDelayExceededDiscards 1.3.6.1.2.1.17.1.4.1.4
The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges.
OBJECT-TYPE    
  Counter  

dot1dBasePortMtuExceededDiscards 1.3.6.1.2.1.17.1.4.1.5
The number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route bridges.
OBJECT-TYPE    
  Counter  

dot1dStp 1.3.6.1.2.1.17.2
OBJECT IDENTIFIER    

topologyChange 1.3.6.1.2.1.17.2
A topologyChange trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. The trap is not sent if a newRoot trap is sent for the same transition. Implementation of this trap is optional.
TRAP-TYPE    

dot1dStpProtocolSpecification 1.3.6.1.2.1.17.2.1
An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If future versions of the IEEE Spanning Tree Protocol are released that are incompatible with the current version a new value will be defined.
OBJECT-TYPE    
  INTEGER unknown(1), decLb100(2), ieee8021d(3)  

dot1dStpPriority 1.3.6.1.2.1.17.2.2
The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress.
OBJECT-TYPE    
  INTEGER 0..65535  

dot1dStpTimeSinceTopologyChange 1.3.6.1.2.1.17.2.3
The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
OBJECT-TYPE    
  TimeTicks  

dot1dStpTopChanges 1.3.6.1.2.1.17.2.4
The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
OBJECT-TYPE    
  Counter  

dot1dStpDesignatedRoot 1.3.6.1.2.1.17.2.5
The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
OBJECT-TYPE    
  BridgeId  

dot1dStpRootCost 1.3.6.1.2.1.17.2.6
The cost of the path to the root as seen from this bridge.
OBJECT-TYPE    
  INTEGER  

dot1dStpRootPort 1.3.6.1.2.1.17.2.7
The port number of the port which offers the lowest cost path from this bridge to the root bridge.
OBJECT-TYPE    
  INTEGER  

dot1dStpMaxAge 1.3.6.1.2.1.17.2.8
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
OBJECT-TYPE    
  Timeout  

dot1dStpHelloTime 1.3.6.1.2.1.17.2.9
The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
OBJECT-TYPE    
  Timeout  

dot1dStpHoldTime 1.3.6.1.2.1.17.2.10
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
OBJECT-TYPE    
  INTEGER  

dot1dStpForwardDelay 1.3.6.1.2.1.17.2.11
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.]
OBJECT-TYPE    
  Timeout  

dot1dStpBridgeMaxAge 1.3.6.1.2.1.17.2.12
The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
OBJECT-TYPE    
  Timeout 600..4000  

dot1dStpBridgeHelloTime 1.3.6.1.2.1.17.2.13
The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
OBJECT-TYPE    
  Timeout 100..1000  

dot1dStpBridgeForwardDelay 1.3.6.1.2.1.17.2.14
The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
OBJECT-TYPE    
  Timeout 400..3000  

dot1dStpPortTable 1.3.6.1.2.1.17.2.15
A table that contains port-specific information for the Spanning Tree Protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    Dot1dStpPortEntry

dot1dStpPortEntry 1.3.6.1.2.1.17.2.15.1
A list of information maintained by every port about the Spanning Tree Protocol state for that port.
OBJECT-TYPE    
  Dot1dStpPortEntry  

dot1dStpPort 1.3.6.1.2.1.17.2.15.1.1
The port number of the port for which this entry contains Spanning Tree Protocol management information.
OBJECT-TYPE    
  INTEGER 1..65535  

dot1dStpPortPriority 1.3.6.1.2.1.17.2.15.1.2
The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of dot1dStpPort.
OBJECT-TYPE    
  INTEGER 0..255  

dot1dStpPortState 1.3.6.1.2.1.17.2.15.1.3
The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see dot1dStpPortEnable), this object will have a value of disabled(1).
OBJECT-TYPE    
  INTEGER disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6)  

dot1dStpPortEnable 1.3.6.1.2.1.17.2.15.1.4
The enabled/disabled status of the port.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

dot1dStpPortPathCost 1.3.6.1.2.1.17.2.15.1.5
The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN.
OBJECT-TYPE    
  INTEGER 1..65535  

dot1dStpPortDesignatedRoot 1.3.6.1.2.1.17.2.15.1.6
The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
OBJECT-TYPE    
  BridgeId  

dot1dStpPortDesignatedCost 1.3.6.1.2.1.17.2.15.1.7
The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
OBJECT-TYPE    
  INTEGER  

dot1dStpPortDesignatedBridge 1.3.6.1.2.1.17.2.15.1.8
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
OBJECT-TYPE    
  BridgeId  

dot1dStpPortDesignatedPort 1.3.6.1.2.1.17.2.15.1.9
The Port Identifier of the port on the Designated Bridge for this port's segment.
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

dot1dStpPortForwardTransitions 1.3.6.1.2.1.17.2.15.1.10
The number of times this port has transitioned from the Learning state to the Forwarding state.
OBJECT-TYPE    
  Counter  

dot1dSr 1.3.6.1.2.1.17.3
OBJECT IDENTIFIER    

dot1dTp 1.3.6.1.2.1.17.4
OBJECT IDENTIFIER    

dot1dTpLearnedEntryDiscards 1.3.6.1.2.1.17.4.1
The total number of Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them in the Forwarding Database. If this counter is increasing, it indicates that the Forwarding Database is regularly becoming full (a condition which has unpleasant performance effects on the subnetwork). If this counter has a significant value but is not presently increasing, it indicates that the problem has been occurring but is not persistent.
OBJECT-TYPE    
  Counter  

dot1dTpAgingTime 1.3.6.1.2.1.17.4.2
The timeout period in seconds for aging out dynamically learned forwarding information. 802.1D-1990 recommends a default of 300 seconds.
OBJECT-TYPE    
  INTEGER 10..1000000  

dot1dTpFdbTable 1.3.6.1.2.1.17.4.3
A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame.
OBJECT-TYPE    
  SEQUENCE OF  
    Dot1dTpFdbEntry

dot1dTpFdbEntry 1.3.6.1.2.1.17.4.3.1
Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information.
OBJECT-TYPE    
  Dot1dTpFdbEntry  

dot1dTpFdbAddress 1.3.6.1.2.1.17.4.3.1.1
A unicast MAC address for which the bridge has forwarding and/or filtering information.
OBJECT-TYPE    
  MacAddress  

dot1dTpFdbPort 1.3.6.1.2.1.17.4.3.1.2
Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1dTpFdbAddress has been seen. A value of '0' indicates that the port number has not been learned but that the bridge does have some forwarding/filtering information about this address (e.g. in the dot1dStaticTable). Implementors are encouraged to assign the port value to this object whenever it is learned even for addresses for which the corresponding value of dot1dTpFdbStatus is not learned(3).
OBJECT-TYPE    
  INTEGER  

dot1dTpFdbStatus 1.3.6.1.2.1.17.4.3.1.3
The status of this entry. The meanings of the values are: other(1) : none of the following. This would include the case where some other MIB object (not the corresponding instance of dot1dTpFdbPort, nor an entry in the dot1dStaticTable) is being used to determine if and how frames addressed to the value of the corresponding instance of dot1dTpFdbAddress are being forwarded. invalid(2) : this entry is not longer valid (e.g., it was learned but has since aged-out), but has not yet been flushed from the table. learned(3) : the value of the corresponding instance of dot1dTpFdbPort was learned, and is being used. self(4) : the value of the corresponding instance of dot1dTpFdbAddress represents one of the bridge's addresses. The corresponding instance of dot1dTpFdbPort indicates which of the bridge's ports has this address. mgmt(5) : the value of the corresponding instance of dot1dTpFdbAddress is also the value of an existing instance of dot1dStaticAddress.
OBJECT-TYPE    
  INTEGER other(1), invalid(2), learned(3), self(4), mgmt(5)  

dot1dTpPortTable 1.3.6.1.2.1.17.4.4
A table that contains information about every port that is associated with this transparent bridge.
OBJECT-TYPE    
  SEQUENCE OF  
    Dot1dTpPortEntry

dot1dTpPortEntry 1.3.6.1.2.1.17.4.4.1
A list of information for each port of a transparent bridge.
OBJECT-TYPE    
  Dot1dTpPortEntry  

dot1dTpPort 1.3.6.1.2.1.17.4.4.1.1
The port number of the port for which this entry contains Transparent bridging management information.
OBJECT-TYPE    
  INTEGER 1..65535  

dot1dTpPortMaxInfo 1.3.6.1.2.1.17.4.4.1.2
The maximum size of the INFO (non-MAC) field that this port will receive or transmit.
OBJECT-TYPE    
  INTEGER  

dot1dTpPortInFrames 1.3.6.1.2.1.17.4.4.1.3
The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames.
OBJECT-TYPE    
  Counter  

dot1dTpPortOutFrames 1.3.6.1.2.1.17.4.4.1.4
The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames.
OBJECT-TYPE    
  Counter  

dot1dTpPortInDiscards 1.3.6.1.2.1.17.4.4.1.5
Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process.
OBJECT-TYPE    
  Counter  

dot1dStatic 1.3.6.1.2.1.17.5
OBJECT IDENTIFIER    

dot1dStaticTable 1.3.6.1.2.1.17.5.1
A table containing filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific destination addresses are allowed to be forwarded. The value of zero in this table as the port number from which frames with a specific destination address are received, is used to specify all ports for which there is no specific entry in this table for that particular destination address. Entries are valid for unicast and for group/broadcast addresses.
OBJECT-TYPE    
  SEQUENCE OF  
    Dot1dStaticEntry

dot1dStaticEntry 1.3.6.1.2.1.17.5.1.1
Filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific destination address are allowed to be forwarded.
OBJECT-TYPE    
  Dot1dStaticEntry  

dot1dStaticAddress 1.3.6.1.2.1.17.5.1.1.1
The destination MAC address in a frame to which this entry's filtering information applies. This object can take the value of a unicast address, a group address or the broadcast address.
OBJECT-TYPE    
  MacAddress  

dot1dStaticReceivePort 1.3.6.1.2.1.17.5.1.1.2
Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the bridge for which there is no other applicable entry.
OBJECT-TYPE    
  INTEGER  

dot1dStaticAllowedToGoTo 1.3.6.1.2.1.17.5.1.1.3
The set of ports to which frames received from a specific port and destined for a specific MAC address, are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of ones of appropriate length.
OBJECT-TYPE    
  OCTET STRING  

dot1dStaticStatus 1.3.6.1.2.1.17.5.1.1.4
This object indicates the status of this entry. The default value is permanent(3). other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object removes the corresponding entry. permanent(3) - this entry is currently in use and will remain so after the next reset of the bridge. deleteOnReset(4) - this entry is currently in use and will remain so until the next reset of the bridge. deleteOnTimeout(5) - this entry is currently in use and will remain so until it is aged out.
OBJECT-TYPE    
  INTEGER other(1), invalid(2), permanent(3), deleteOnReset(4), deleteOnTimeout(5)  

phiv 1.3.6.1.2.1.18
OBJECT IDENTIFIER    

phivSystem 1.3.6.1.2.1.18.1
OBJECT IDENTIFIER    

phivManagement 1.3.6.1.2.1.18.2
OBJECT IDENTIFIER    

session 1.3.6.1.2.1.18.3
OBJECT IDENTIFIER    

end 1.3.6.1.2.1.18.4
OBJECT IDENTIFIER    

routing 1.3.6.1.2.1.18.5
OBJECT IDENTIFIER    

circuit 1.3.6.1.2.1.18.6
OBJECT IDENTIFIER    

phivCircuitParametersTable 1.3.6.1.2.1.18.6.1
Information about the parameters associated with all circuits currently known.
OBJECT-TYPE    
  SEQUENCE OF  
    PhivCircuitParametersEntry

phivCircuitParametersEntry 1.3.6.1.2.1.18.6.1.1
Parameters information about all circuits currently known.
OBJECT-TYPE    
  PhivCircuitParametersEntry  

phivCircuitIndex 1.3.6.1.2.1.18.6.1.1.1
A unique index value for each known circuit.
OBJECT-TYPE    
  INTEGER  

phivCircuitLineIndex 1.3.6.1.2.1.18.6.1.1.2
The line on which this circuit is active. This is the same as the IfIndex.
OBJECT-TYPE    
  INTEGER  

phivCircuitCommonState 1.3.6.1.2.1.18.6.1.1.3
This value represents the circuit's Network Management operational state. NOTE: These values are incremented by one compared to the standard DECnet values in order to maintain compliance with RFC 1155.
OBJECT-TYPE    
  INTEGER on(1), off(2), service(3), cleared(4)  

phivCircuitCommonSubState 1.3.6.1.2.1.18.6.1.1.4
This value represents the circuit's Network Management operational and service substate. NOTE: These values are incremented by one compared to the standard DECnet values in order to maintain compliance with RFC 1155.
OBJECT-TYPE    
  INTEGER starting(1), reflecting(2), looping(3), loading(4), dumping(5), triggering(6), autoservice(7), autoloading(8), autodumping(9), autotriggering(10), synchronizing(11), failed(12), running(13)  

phivCircuitCommonName 1.3.6.1.2.1.18.6.1.1.5
The name of the circuit entry in the table, for example, SVA-0 or in a level 2 router ASYNC-8 or ETHER-1).
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

phivCircuitExecRecallTimer 1.3.6.1.2.1.18.6.1.1.6
This parameter represents the minimum number of seconds to wait before restarting the circuit. A value of 0 indicates not timer is running.
OBJECT-TYPE    
  INTEGER 0..65535  

phivCircuitCommonType 1.3.6.1.2.1.18.6.1.1.7
Represents the type of the circuit. For X.25 circuits, the value must be set to X25. For DDCMP and Ethernet circuits it is read only and is the same value as the protocol of the associated line. NOTE: Values 1 - 5 are incremented by one compared to the standard DECnet values in order to maintain compliance with RFC 1155.
OBJECT-TYPE    
  INTEGER ddcmp-point(1), ddcmp-control(2), ddcmp-tributary(3), x25(4), ddcmp-dmc(5), ethernet(6), ci(7), qp2-dte20(8), bisync(9), other(14), fddi(15)  

phivCircuitService 1.3.6.1.2.1.18.6.1.1.8
This value indicates whether or not Network Management allows service operations on a circuit. The values for service-control are as follows: ENABLED SERVICE state and/or service functions are allowed. DISABLED SERVICE state and/or service functions are not allowed. NOTE: These values are incremented by one compared to the standard DECnet values in order to maintain compliance with RFC 1155.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

phivCircuitExecCost 1.3.6.1.2.1.18.6.1.1.9
This value represents the routing cost of the circuit. Routing sends messages along the path between two nodes having the smallest cost.
OBJECT-TYPE    
  INTEGER 1..25  

phivCircuitExecHelloTimer 1.3.6.1.2.1.18.6.1.1.10
This value determines the frequency of Routing Hello messages sent to the adjacent node on the circuit.
OBJECT-TYPE    
  INTEGER 1..8191  

phivCircuitCountTable 1.3.6.1.2.1.18.6.2
Information about the counters associated with all circuits currently known.
OBJECT-TYPE    
  SEQUENCE OF  
    PhivCircuitCountEntry

phivCircuitCountEntry 1.3.6.1.2.1.18.6.2.1
Counter information about all circuits currently known
OBJECT-TYPE    
  PhivCircuitCountEntry  

phivCircuitCountSecLastZeroed 1.3.6.1.2.1.18.6.2.1.1
Number of seconds since the circuit counters for this circuit were last zeroed.
OBJECT-TYPE    
  PhivCounter 0..65535  

phivCircuitCountTermPacketsRecd 1.3.6.1.2.1.18.6.2.1.2
Number of terminating packets received on this circuit.
OBJECT-TYPE    
  PhivCounter  

phivCircuitCountOriginPackSent 1.3.6.1.2.1.18.6.2.1.3
Number of originating packets sent on this circuit.
OBJECT-TYPE    
  PhivCounter  

phivCircuitCountTermCongLoss 1.3.6.1.2.1.18.6.2.1.4
Number of terminating congestion losses on this circuit.
OBJECT-TYPE    
  PhivCounter 0..65535  

phivCircuitCountCorruptLoss 1.3.6.1.2.1.18.6.2.1.5
Number of corruption losses on this circuit.
OBJECT-TYPE    
  PhivCounter 0..255  

phivCircuitCountTransitPksRecd 1.3.6.1.2.1.18.6.2.1.6
Number of Transit packets received on this circuit.
OBJECT-TYPE    
  PhivCounter  

phivCircuitCountTransitPkSent 1.3.6.1.2.1.18.6.2.1.7
Number of transit packets sent on this circuit.
OBJECT-TYPE    
  PhivCounter  

phivCircuitCountTransitCongestLoss 1.3.6.1.2.1.18.6.2.1.8
Number of transit congestion losses on this circuit.
OBJECT-TYPE    
  PhivCounter 0..65535  

phivCircuitCountCircuitDown 1.3.6.1.2.1.18.6.2.1.9
Number of circuit downs on this circuit.
OBJECT-TYPE    
  PhivCounter 0..255  

phivCircuitCountInitFailure 1.3.6.1.2.1.18.6.2.1.10
Number of Initialization failures on this circuit.
OBJECT-TYPE    
  PhivCounter 0..255  

phivCircuitCountAdjDown 1.3.6.1.2.1.18.6.2.1.11
This counter indicates the number of adjacency losses that result from any of the following: Node listener timeout Invalid data received at node listener Unexpected control (initialization or verification) message received Routing message received with a checksum error Node identification from a routing message or a Hello message that is not the one expected Hello message received indicating that connectivity became one-way Adjacency idled.
OBJECT-TYPE    
  PhivCounter  

phivCircuitCountPeakAdj 1.3.6.1.2.1.18.6.2.1.12
This counter indicates the maximum number of nodes that are up on the circuit.
OBJECT-TYPE    
  PhivCounter  

phivCircuitCountBytesRecd 1.3.6.1.2.1.18.6.2.1.13
Number of bytes received on this circuit.
OBJECT-TYPE    
  PhivCounter  

phivCircuitCountBytesSent 1.3.6.1.2.1.18.6.2.1.14
Number of bytes sent on this circuit.
OBJECT-TYPE    
  PhivCounter  

phivCircuitCountDataBlocksRecd 1.3.6.1.2.1.18.6.2.1.15
Number of data blocks received on this circuit.
OBJECT-TYPE    
  PhivCounter 0..65535  

phivCircuitCountDataBlocksSent 1.3.6.1.2.1.18.6.2.1.16
Number of data blocks sent on this circuit.
OBJECT-TYPE    
  PhivCounter  

phivCircuitCountUsrBuffUnav 1.3.6.1.2.1.18.6.2.1.17
Number of user buffer unavailable errors.
OBJECT-TYPE    
  PhivCounter 0..65535  

phivCircuitOrigQueueLimit 1.3.6.1.2.1.18.6.3
This parameter indicates the maximum number of originating packets that may be outstanding on this circuit. This does not include route-thru traffic.
OBJECT-TYPE    
  INTEGER  

phivCircuitCountZeroCount 1.3.6.1.2.1.18.6.4
When this value is set to 2, all of the counters in the Circuit Counter Table are set to zero.
OBJECT-TYPE    
  INTEGER other(1), reset(2)  

ddcmp 1.3.6.1.2.1.18.7
OBJECT IDENTIFIER    

control 1.3.6.1.2.1.18.8
OBJECT IDENTIFIER    

ethernet 1.3.6.1.2.1.18.9
OBJECT IDENTIFIER    

counters 1.3.6.1.2.1.18.10
OBJECT IDENTIFIER    

adjacency 1.3.6.1.2.1.18.11
OBJECT IDENTIFIER    

line 1.3.6.1.2.1.18.12
OBJECT IDENTIFIER    

nonBroadcastLine 1.3.6.1.2.1.18.14
OBJECT IDENTIFIER    

area 1.3.6.1.2.1.18.15
OBJECT IDENTIFIER    

char 1.3.6.1.2.1.19
OBJECT IDENTIFIER    

charNumber 1.3.6.1.2.1.19.1
The number of entries in charPortTable, regardless of their current state.
OBJECT-TYPE    
  INTEGER  

charPortTable 1.3.6.1.2.1.19.2
A list of port entries. The number of entries is given by the value of charNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    CharPortEntry

charPortEntry 1.3.6.1.2.1.19.2.1
Status and parameter values for a character port.
OBJECT-TYPE    
  CharPortEntry  

charPortIndex 1.3.6.1.2.1.19.2.1.1
A unique value for each character port. Its value ranges between 1 and the value of charNumber. By convention and if possible, hardware port numbers come first, with a simple, direct mapping. The value for each port must remain constant at least from one re-initialization of the network management agent to the next.
OBJECT-TYPE    
  INTEGER  

charPortName 1.3.6.1.2.1.19.2.1.2
An administratively assigned name for the port, typically with some local significance.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

charPortType 1.3.6.1.2.1.19.2.1.3
The port's type, 'physical' if the port represents an external hardware connector, 'virtual' if it does not.
OBJECT-TYPE    
  INTEGER physical(1), virtual(2)  

charPortHardware 1.3.6.1.2.1.19.2.1.4
A reference to hardware MIB definitions specific to a physical port's external connector. For example, if the connector is RS-232, then the value of this object refers to a MIB sub-tree defining objects specific to RS-232. If an agent is not configured to have such values, the agent returns the object identifier: nullHardware OBJECT IDENTIFIER ::= { 0 0 }
OBJECT-TYPE    
  AutonomousType  

charPortReset 1.3.6.1.2.1.19.2.1.5
A control to force the port into a clean, initial state, both hardware and software, disconnecting all the port's existing sessions. In response to a get-request or get-next-request, the agent always returns 'ready' as the value. Setting the value to 'execute' causes a reset.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

charPortAdminStatus 1.3.6.1.2.1.19.2.1.6
The port's desired state, independent of flow control. 'enabled' indicates that the port is allowed to pass characters and form new sessions. 'disabled' indicates that the port is allowed to pass characters but not form new sessions. 'off' indicates that the port is not allowed to pass characters or have any sessions. 'maintenance' indicates a maintenance mode, exclusive of normal operation, such as running a test.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), off(3), maintenance(4)  

charPortOperStatus 1.3.6.1.2.1.19.2.1.7
The port's actual, operational state, independent of flow control. 'up' indicates able to function normally. 'down' indicates inability to function for administrative or operational reasons. 'maintenance' indicates a maintenance mode, exclusive of normal operation, such as running a test. 'absent' indicates that port hardware is not present. 'active' indicates up with a user present (e.g. logged in).
OBJECT-TYPE    
  INTEGER up(1), down(2), maintenance(3), absent(4), active(5)  

charPortLastChange 1.3.6.1.2.1.19.2.1.8
The value of sysUpTime at the time the port entered its current operational state. If the current state was entered prior to the last reinitialization of the local network management subsystem, then this object contains a zero value.
OBJECT-TYPE    
  TimeTicks  

charPortInFlowType 1.3.6.1.2.1.19.2.1.9
The port's type of input flow control. 'none' indicates no flow control at this level or below. 'xonXoff' indicates software flow control by recognizing XON and XOFF characters. 'hardware' indicates flow control delegated to the lower level, for example a parallel port. 'ctsRts' and 'dsrDtr' are specific to RS-232-like ports. Although not architecturally pure, they are included here for simplicity's sake.
OBJECT-TYPE    
  INTEGER none(1), xonXoff(2), hardware(3), ctsRts(4), dsrDtr(5)  

charPortOutFlowType 1.3.6.1.2.1.19.2.1.10
The port's type of output flow control. 'none' indicates no flow control at this level or below. 'xonXoff' indicates software flow control by recognizing XON and XOFF characters. 'hardware' indicates flow control delegated to the lower level, for example a parallel port. 'ctsRts' and 'dsrDtr' are specific to RS-232-like ports. Although not architecturally pure, they are included here for simplicy's sake.
OBJECT-TYPE    
  INTEGER none(1), xonXoff(2), hardware(3), ctsRts(4), dsrDtr(5)  

charPortInFlowState 1.3.6.1.2.1.19.2.1.11
The current operational state of input flow control on the port. 'none' indicates not applicable. 'unknown' indicates this level does not know. 'stop' indicates flow not allowed. 'go' indicates flow allowed.
OBJECT-TYPE    
  INTEGER none(1), unknown(2), stop(3), go(4)  

charPortOutFlowState 1.3.6.1.2.1.19.2.1.12
The current operational state of output flow control on the port. 'none' indicates not applicable. 'unknown' indicates this level does not know. 'stop' indicates flow not allowed. 'go' indicates flow allowed.
OBJECT-TYPE    
  INTEGER none(1), unknown(2), stop(3), go(4)  

charPortInCharacters 1.3.6.1.2.1.19.2.1.13
Total number of characters detected as input from the port since system re-initialization and while the port operational state was 'up', 'active', or 'maintenance', including, for example, framing, flow control (i.e. XON and XOFF), each occurrence of a BREAK condition, locally-processed input, and input sent to all sessions.
OBJECT-TYPE    
  Counter  

charPortOutCharacters 1.3.6.1.2.1.19.2.1.14
Total number of characters detected as output to the port since system re-initialization and while the port operational state was 'up', 'active', or 'maintenance', including, for example, framing, flow control (i.e. XON and XOFF), each occurrence of a BREAK condition, locally-created output, and output received from all sessions.
OBJECT-TYPE    
  Counter  

charPortAdminOrigin 1.3.6.1.2.1.19.2.1.15
The administratively allowed origin for establishing session on the port. 'dynamic' allows 'network' or 'local' session establishment. 'none' disallows session establishment.
OBJECT-TYPE    
  INTEGER dynamic(1), network(2), local(3), none(4)  

charPortSessionMaximum 1.3.6.1.2.1.19.2.1.16
The maximum number of concurrent sessions allowed on the port. A value of -1 indicates no maximum. Setting the maximum to less than the current number of sessions has unspecified results.
OBJECT-TYPE    
  INTEGER  

charPortSessionNumber 1.3.6.1.2.1.19.2.1.17
The number of open sessions on the port that are in the connecting, connected, or disconnecting state.
OBJECT-TYPE    
  Gauge  

charPortSessionIndex 1.3.6.1.2.1.19.2.1.18
The value of charSessIndex for the port's first or only active session. If the port has no active session, the agent returns the value zero.
OBJECT-TYPE    
  INTEGER  

charSessTable 1.3.6.1.2.1.19.3
A list of port session entries.
OBJECT-TYPE    
  SEQUENCE OF  
    CharSessEntry

charSessEntry 1.3.6.1.2.1.19.3.1
Status and parameter values for a character port session.
OBJECT-TYPE    
  CharSessEntry  

charSessPortIndex 1.3.6.1.2.1.19.3.1.1
The value of charPortIndex for the port to which this session belongs.
OBJECT-TYPE    
  INTEGER  

charSessIndex 1.3.6.1.2.1.19.3.1.2
The session index in the context of the port, a non-zero positive integer. Session indexes within a port need not be sequential. Session indexes may be reused for different ports. For example, port 1 and port 3 may both have a session 2 at the same time. Session indexes may have any valid integer value, with any meaning convenient to the agent implementation.
OBJECT-TYPE    
  INTEGER  

charSessKill 1.3.6.1.2.1.19.3.1.3
A control to terminate the session. In response to a get-request or get-next-request, the agent always returns 'ready' as the value. Setting the value to 'execute' causes termination.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

charSessState 1.3.6.1.2.1.19.3.1.4
The current operational state of the session, disregarding flow control. 'connected' indicates that character data could flow on the network side of session. 'connecting' indicates moving from nonexistent toward 'connected'. 'disconnecting' indicates moving from 'connected' or 'connecting' to nonexistent.
OBJECT-TYPE    
  INTEGER connecting(1), connected(2), disconnecting(3)  

charSessProtocol 1.3.6.1.2.1.19.3.1.5
The network protocol over which the session is running. Other OBJECT IDENTIFIER values may be defined elsewhere, in association with specific protocols. However, this document assigns those of known interest as of this writing.
OBJECT-TYPE    
  AutonomousType  

charSessOperOrigin 1.3.6.1.2.1.19.3.1.6
The session's source of establishment.
OBJECT-TYPE    
  INTEGER unknown(1), network(2), local(3)  

charSessInCharacters 1.3.6.1.2.1.19.3.1.7
This session's subset of charPortInCharacters.
OBJECT-TYPE    
  Counter  

charSessOutCharacters 1.3.6.1.2.1.19.3.1.8
This session's subset of charPortOutCharacters.
OBJECT-TYPE    
  Counter  

charSessConnectionId 1.3.6.1.2.1.19.3.1.9
A reference to additional local MIB information. This should be the highest available related MIB, corresponding to charSessProtocol, such as Telnet. For example, the value for a TCP connection (in the absence of a Telnet MIB) is the object identifier of tcpConnState. If an agent is not configured to have such values, the agent returns the object identifier: nullConnectionId OBJECT IDENTIFIER ::= { 0 0 }
OBJECT-TYPE    
  InstancePointer  

charSessStartTime 1.3.6.1.2.1.19.3.1.10
The value of sysUpTime in MIB-2 when the session entered connecting state.
OBJECT-TYPE    
  TimeTicks  

wellKnownProtocols 1.3.6.1.2.1.19.4
OBJECT IDENTIFIER    

protocolOther 1.3.6.1.2.1.19.4.1
OBJECT IDENTIFIER    

protocolTelnet 1.3.6.1.2.1.19.4.2
OBJECT IDENTIFIER    

protocolRlogin 1.3.6.1.2.1.19.4.3
OBJECT IDENTIFIER    

protocolLat 1.3.6.1.2.1.19.4.4
OBJECT IDENTIFIER    

protocolX29 1.3.6.1.2.1.19.4.5
OBJECT IDENTIFIER    

protocolVtp 1.3.6.1.2.1.19.4.6
OBJECT IDENTIFIER    

experimental 1.3.6.1.3
OBJECT IDENTIFIER    

private 1.3.6.1.4
OBJECT IDENTIFIER    

enterprises 1.3.6.1.4.1
OBJECT IDENTIFIER    

mrvInReachProductDivision 1.3.6.1.4.1.33
OBJECT IDENTIFIER    

xSystem 1.3.6.1.4.1.33.1
OBJECT IDENTIFIER    

sysIdent 1.3.6.1.4.1.33.1.1
An identification string for local and remote displays. Corresponds directly to SERVER IDENTIFICATION and the value labeled 'Identification:' on the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  DisplayString SIZE(0..50)  

resourceLack 1.3.6.1.4.1.33.1.1
Indication that the system incremented the corresponding value of resLacks.
TRAP-TYPE    
  resType  

sysDefineMode 1.3.6.1.4.1.33.1.2
The system's operation with regard to DEFINE commands. 'permOnly' indicates that DEFINE commands modify only the permanent data base. 'operAndPerm' indicates that DEFINE commands modify both operational and permanent data bases, unless specifically documented to the contrary. Corresponds to SERVER CHANGE and the presence of the label CHANGE in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER permOnly(1), operAndPerm(2)  

sysDateTime 1.3.6.1.4.1.33.1.3
The system's current local date and time. Corresponds directly to SERVER DATE and SERVER TIME and the value in various displays.
OBJECT-TYPE    
  DateTime  

sysTimeZone 1.3.6.1.4.1.33.1.4
The adjustment to apply to a universal (Greenwich) time received when down-line loaded, comprising two octets. The first octet is the number of hours west of universal, the second is the number of minutes. Corresponds directly to SERVER TIMEZONE and the value labeled 'Timezone:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

sysLoadSoftware 1.3.6.1.4.1.33.1.5
The software file name to request for down-line load of the server. Corresponds directly to SERVER SOFTWARE, and the value labeled 'Software:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

sysDump 1.3.6.1.4.1.33.1.6
Control for dumping the system's memory when the system crashes. Corresponds directly to SERVER DUMP and the presence of 'Dump' under the label 'Enabled Characteristics' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

sysMaintenancePassword 1.3.6.1.4.1.33.1.7
The password a management system must supply to force the system to reboot or use the system's remote console via the Maintenance Operation Protocol (MOP). Corresponds directly to SERVER MAINTENANCE PASSWORD. When setting this value, the management system must supply eight octets, filling with zeros from the first octet. That is, the value '1ab42' would be expressed as '0.0.0.0.0.1.ab.42'. Setting the value to zero disables the password check. When returning this value, the agent always returns a zero length OCTET STRING.
OBJECT-TYPE    
  OCTET STRING SIZE(0..8)  

sysLocalName 1.3.6.1.4.1.33.1.8
The system's local name. Corresponds directly to SERVER NAME and the value labeled 'Name:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  DisplayString SIZE(1..16)  

sysSoftwareVersionType 1.3.6.1.4.1.33.1.9
The software version variant running in the system. Corresponds to the letter in the software version in the SERVER CHARACTERISTICS display. alpha 'A': alpha test beta 'B': beta test production null: normal, production software special 'S': special, custom software
OBJECT-TYPE    
  INTEGER alpha(1), beta(2), production(3), special(4)  

sysSoftwareVersion 1.3.6.1.4.1.33.1.10
The software version running in the system. In order, the octets contain major version, minor version, ECO, and pre-release number. Corresponds to the numbers in the software version in the SERVER CHARACTERISTICS display. For example, the version display for sysSoftwareVersionType 'production' and sysSoftwareVersion '2.2.0.0' is 'V2.2'. The version display for sysSoftwareVersionType 'beta' and sysSoftwareVersion '3.1.0.4' is 'V3.1B4'.
OBJECT-TYPE    
  OCTET STRING SIZE(4)  

sysRomVersion 1.3.6.1.4.1.33.1.11
The firmware version of the bootstrap ROM installed in the system. Corresponds directly to the value labeled 'Rom' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER  

sysHardwareType 1.3.6.1.4.1.33.1.12
The type of hardware on which the system is running. Corresponds directly to the value labeled 'Hardware Type:' in the UNIT display.
OBJECT-TYPE    
  HardwareType  

sysHardwareVersion 1.3.6.1.4.1.33.1.13
This version of hardware on which the system is running. Corresponds directly to part of the value labeled 'HW' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER  

sysChassisType 1.3.6.1.4.1.33.1.14
The type of chassis in which the system is running. Corresponds directly to part of the value labeled 'HW' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  ChassisType  

sysChassisVersion 1.3.6.1.4.1.33.1.15
This version of chassis in which the system is running. Corresponds directly to part of the value labeled 'HW' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER  

sysCrash 1.3.6.1.4.1.33.1.16
Control to cause this system to crash. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' causes an immediate crash. Corresponds to the CRASH command.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

sysInitialize 1.3.6.1.4.1.33.1.17
Control to cause this system to reset its software to initial load values, typically by reloading. When executing an initialize command, the system observes the value of sysInitializeDelay as supplied anywhere in the same set request with sysInitialize. If this value is not included in the set request, the system uses its default value. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'conditionalExecute' causes initialization if the overall system state is acceptible (such as not needing to store permanent parameters). Setting it to 'unconditionalExecute' causes initialization regardless of the overall system state. Setting it to 'cancel' aborts an initialization that has not yet started. According to standard SNMP operation, if the system is not in a proper state to accept a given set request for this value, it returns the standard SNMP error 'badValue'. Corresponds to the INITIALIZE command.
OBJECT-TYPE    
  INTEGER ready(1), conditionalExecute(2), unconditionalExecute(3), cancel(4)  

sysInitializeDelay 1.3.6.1.4.1.33.1.18
The number of minutes to delay before beginning the system initialization process as executed with sysInitialize. This value cannot be set outside a set-request that contains the value 'execute' for sysInitialize. If not included in such a set, the default value is 1. Corresponds to the INITIALIZE command's DELAY parameter and to the value labeled 'Minutes to shutdown:' in the SYSTEM STATUS display.
OBJECT-TYPE    
  INTEGER 0..32767  

sysZeroAll 1.3.6.1.4.1.33.1.19
Control to zero all counters. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' causes all the system's counters to be zeroed. Corresponds to the ZERO ALL command.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

sysZeroBase 1.3.6.1.4.1.33.1.20
Control to zero all base counters. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' causes all the system's base counters to be zeroed. Examples of counters that are zeroed are the SNMP counters or the counters from the SYSTEM COUNTERS display. Examples of counters that are not zeroed are Ethernet interface counters or port counters. Corresponds to the ZERO SYSTEM command.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

sysZeroBaseTime 1.3.6.1.4.1.33.1.21
The number hundredths of a second since the most recent zeroing of the base counters, such as through execution of sysZeroAll or sysZeroBase. Corresponds directly to the value labeled 'Seconds Since Zeroed:' in the SERVER COUNTERS display.
OBJECT-TYPE    
  TimeTicks  

sysLoaderName 1.3.6.1.4.1.33.1.22
The name of the system that provided this system's running software. Corresponds directly to the value labeled 'Primary Host:' in the SERVER STATUS display.
OBJECT-TYPE    
  DisplayString SIZE(0..40)  

sysLoaderAddressType 1.3.6.1.4.1.33.1.23
The type of network address contained in sysLoaderAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'local' means there is no address and this system's software was loaded from local storage. 'ip' is an Internet IP address. 'ethernet' is an 802.3 MAC address. Corresponds indirectly to the value labeled 'Load Address:' in the SERVER STATUS display.
OBJECT-TYPE    
  AddressType  

sysLoaderAddress 1.3.6.1.4.1.33.1.24
The network address of the system that provided this system's running software. Corresponds directly to the value labeled 'Load Address:' in the SERVER STATUS display.
OBJECT-TYPE    
  OCTET STRING  

sysDumperAddressType 1.3.6.1.4.1.33.1.25
The type of network address contained in sysDumperAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'local' means there is no address and this system's was dumped to local storage. 'ip' is an Internet IP address. 'ethernet' is an 802.3 MAC address. Corresponds indirectly to the value labeled 'Dump Address:' in the SERVER STATUS display.
OBJECT-TYPE    
  AddressType  

sysDumperAddress 1.3.6.1.4.1.33.1.26
The network address of the system that most recently accepted a crash dump from this system. Corresponds directly to the value labeled 'Dump Address:' in the SERVER STATUS display.
OBJECT-TYPE    
  OCTET STRING  

sysResourceLacks 1.3.6.1.4.1.33.1.27
The number of times a local resource allocation failed, for example due to lack of dynamic memory. Corresponds directly to the value labeled 'Resource Errors:' in the SERVER STATUS display.
OBJECT-TYPE    
  Counter  

sysChassisState 1.3.6.1.4.1.33.1.28
For chassis-based systems, the state of the overall chassis. 'notApplicable' indicates the system is not chassis based. 'noFault' indicates no current chassis problem. 'fault' indicates a current chassis problem such as a card or power supply failure. Corresponds directly to the value labeled 'Crate Current State: in the SERVER ALTERNATE STATUS display.
OBJECT-TYPE    
  INTEGER notApplicable(1), noFault(2), fault(3), loop(4)  

sysChassisFaultTransitions 1.3.6.1.4.1.33.1.29
The number of times this system has seen sysChassisState switch from 'noFault' to 'fault' or from 'fault' to 'noFault'. Corresponds directly to the value labeled 'Crate Transition Count: in the SERVER ALTERNATE STATUS display.
OBJECT-TYPE    
  Counter  

sysResourceNumber 1.3.6.1.4.1.33.1.30
The number of resource entries in the Resource table.
OBJECT-TYPE    
  INTEGER  

sysFeatureNumber 1.3.6.1.4.1.33.1.31
The number of feature entries in the Feature table.
OBJECT-TYPE    
  INTEGER  

resTable 1.3.6.1.4.1.33.1.32
A list of resource entries. The number of entries is given by the value of sysResourceNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    ResEntry

resEntry 1.3.6.1.4.1.33.1.32.1
Status values for a system resource.
OBJECT-TYPE    
  ResEntry  

resType 1.3.6.1.4.1.33.1.32.1.1
Identification of a resource type. Typically corresponds directly to a label such as 'Processes:' in the SERVER ALTERNATE STATUS display.
OBJECT-TYPE    
  INTEGER cpuPercent(1), memoryPercent(2), process(3), timer(4), packetBuffer(5), ipcMessage(6), textPool(7), freeMemory(8), globalMemoryPercent(9), phivDecnetRouteCache(10), ipFilterCache(11), ipRouteCache(12), ipxRouteCache(13), ipPolicyTable(14), ipFilterTable(15), phivDecnetPolicyTable(16), phivDecnetFilterTable(17), appleRouteCache(18), appleFilterTable(19), repeaterPortAccessTable(20), repeaterPortNameTable(21), ipxRipTable(22), ipxSapTable(23), repeaterPortSecurityTable(24), bridgeFilterTable(25), bridgeStaticFilters(26), bridgeSourceFilters(27), bridgeLearnedFilters(28), bridgeInactiveFilters(29), bridgeProtocolFilters(30), latAnnouncementCompressionTable(31), packetCompressionTable(32), ipFragmentTable(33), repeaterRedundancyTable(34), repeaterGlobalSecurityTable(35), packetHeaders(36), interfaces(37), circuits(38), ipIgmpTable(39), ipMulticastTable(40), ipRouteTable(41), ipxRipFilterTable(42), ipxSapFilterTable(43)  

resCurrent 1.3.6.1.4.1.33.1.32.1.2
The number of resources currently in use on the system. Typically corresponds directly to a value labeled 'Cur' in the SERVER ALTERNATE STATUS display.
OBJECT-TYPE    
  Gauge  

resWorst 1.3.6.1.4.1.33.1.32.1.3
The highest or lowest value of resCurrent since system initialization. Typically corresponds directly to a value labeled 'High' or 'Low' in the SERVER ALTERNATE STATUS display.
OBJECT-TYPE    
  Gauge  

resAdminMaximum 1.3.6.1.4.1.33.1.32.1.4
The desired maximum possible number of resources in the system. In many cases, ACCESS to this object for a particular resType is read-only. Typically corresponds directly to a value labeled 'Max' in the SERVER ALTERNATE STATUS display for desired, administrative values. When the desired change takes effect is implementation specific, ranging from immediately to the next system initialization.
OBJECT-TYPE    
  INTEGER  

resLacks 1.3.6.1.4.1.33.1.32.1.5
The number of times since system initialization that the system could not obtain the resource because none were available. Typically corresponds directly to a value labeled 'Failure' in the SERVER ALTERNATE STATUS display. If such failures do not apply to the particular resource, such as 'cpuPercent', the agent returns zero for this object.
OBJECT-TYPE    
  Counter  

resLackTime 1.3.6.1.4.1.33.1.32.1.6
The local system date and time when resLack last increased. Typically corresponds directly to a value labeled 'Last Occurred' in the SERVER ALTERNATE STATUS display. If such failures do not apply to the particular resource, such as 'cpuPercent', the agent returns all zeroes (unknown) for this object.
OBJECT-TYPE    
  DateTime  

resOperMaximum 1.3.6.1.4.1.33.1.32.1.7
The current maximum possible number of resources in the system. Typically corresponds directly to a value labeled 'Max' in the SERVER ALTERNATE STATUS display for current operational values. This value is based on current or previous value of resAdminMaximum.
OBJECT-TYPE    
  INTEGER  

featTable 1.3.6.1.4.1.33.1.33
A list of feature entries. The number of entries is given by the value of sysFeatureNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    FeatEntry

featEntry 1.3.6.1.4.1.33.1.33.1
Status values for a system feature.
OBJECT-TYPE    
  FeatEntry  

featType 1.3.6.1.4.1.33.1.33.1.1
Identification of a feature type. Corresponds to a SERVER feature keyword.
OBJECT-TYPE    
  INTEGER help(1), snmp(2), xremote(3), tn3270(4), menu(5), multisessions(6), lat(7), eventLog(8), internetSecurity(9), slip(10), scriptServer(11), kerberos(12), telnet(13), rlogin(14), allPorts(15), xprinter(16), x25(17), frameRelay(18), ipMulticastSpecial(19), changeEthernetAddress(20), expanded800(21), lpDaemon(22), ppp(23), unixCommands(24), arap(25), fingerDaemon(26), routeDaemon(27), rwhoDaemon(28), securID(29), apd(30), ipxRouting(31), ipxFiltering(32), ipFiltering(33), kerberos5(34), radius(35), enviromentalManager(36), terminalServer(37), ssh(38), tl1(39)  

featStatus 1.3.6.1.4.1.33.1.33.1.2
The status of the feature as of the next system initialization. Corresponds to the presence of the feature's lable following the label 'Enabled Feature(s): in the UNIT display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2), locked(3)  

featKey 1.3.6.1.4.1.33.1.33.1.3
The key a management system must supply to make a locked feature available. When unlocking a feature and the management system does not supply a value for featStatus, that object's value is implementation dependent. When returning this value, the agent always returns a zero length DisplayString.
OBJECT-TYPE    
  DisplayString SIZE(8)  

xBootControl 1.3.6.1.4.1.33.1.34
OBJECT IDENTIFIER    

bootControlLoadInternetFile 1.3.6.1.4.1.33.1.34.1
The filename to request when loading an image via TFTP. Corresponds directly to SERVER INTERNET LOAD FILE and the value labeled 'Internet Load File:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

bootControlLoadInternetServer 1.3.6.1.4.1.33.1.34.2
The internet address of the server to use when loading an image via TFTP. Corresponds directly to SERVER INTERNET LOAD HOST and the value labeled 'Internet Load Host:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  IpAddress  

bootControlLoadInternetGateway 1.3.6.1.4.1.33.1.34.3
The internet address of the gateway to use when loading an image via TFTP. Corresponds directly to SERVER INTERNET LOAD GATEWAY and the value labeled 'Internet Load Gateway:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  IpAddress  

bootControlLoadBootpTftp 1.3.6.1.4.1.33.1.34.4
Control for loading via the combination of BOOTP and TFTP. Corresponds to SERVER LOAD PROTOCOL BOOTPTFTP and the presence of 'BOOTP/TFTP/' following the label 'Load Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

bootControlLoadTftpDirect 1.3.6.1.4.1.33.1.34.5
Control for loading via directed TFTP. Corresponds to SERVER LOAD PROTOCOL TFTPDIRECT and the presence of 'TFTPDIRECT' following the label 'Load Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

bootControlLoadLocal 1.3.6.1.4.1.33.1.34.6
Control for loading from a local medium. Corresponds to SERVER LOAD PROTOCOL LOCAL and the presence of 'LOCAL' following the label 'Load Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

bootControlLoadMop 1.3.6.1.4.1.33.1.34.7
Control for loading via DEC MOP. Corresponds to SERVER LOAD PROTOCOL MOP and the presence of 'MOP' following the label 'Load Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

bootControlLoadProprietary 1.3.6.1.4.1.33.1.34.8
Control for loading via MRV In-Reach-proprietary extended MOP. Corresponds to SERVER LOAD PROTOCOL PROPRIETARY and the presence of 'Proprietary' following the label 'Load Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

bootControlLoadRarpTftp 1.3.6.1.4.1.33.1.34.9
Control for loading via the combination of RARP and TFTP. Corresponds to SERVER LOAD PROTOCOL RARPTFTP and the presence of 'RARP/TFTP' following the label 'Load Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

bootControlDumpBootpTftp 1.3.6.1.4.1.33.1.34.10
Control for dumping via the combination of BOOTP and TFTP. Corresponds to SERVER DUMP PROTOCOL BOOTPTFTP and the presence of 'BOOTP/TFTP' following the label 'Dump Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

bootControlDumpLocal 1.3.6.1.4.1.33.1.34.11
Control for dumping to a local medium. Corresponds to SERVER DUMP PROTOCOL LOCAL and the presence of 'Local' following the label 'Dump Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

bootControlDumpMop 1.3.6.1.4.1.33.1.34.12
Control for dumping via DEC MOP. Corresponds to SERVER DUMP PROTOCOL MOP and the presence of 'MOP' following the label 'Dump Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

bootControlDumpProprietary 1.3.6.1.4.1.33.1.34.13
Control for dumping via MRV In-Reach-proprietary extended MOP. Corresponds to SERVER DUMP PROTOCOL PROPRIETARY and the presence of 'Proprietary' following the label 'Dump Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

bootControlDumpRarpTftp 1.3.6.1.4.1.33.1.34.14
Control for dumping via the combination of RARP and TFTP. Corresponds to SERVER DUMP PROTOCOL RARPTFTP and the presence of 'RARP/TFTP' following the label 'Dump Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

bootControlParamBootpTftp 1.3.6.1.4.1.33.1.34.15
Control for loading parameters via the combination of BOOTP and TFTP. Corresponds to SERVER PARAMETER PROTOCOL MOP and the presence of 'BOOTP/TFTP' following the label 'Parameter Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

bootControlParamLocal 1.3.6.1.4.1.33.1.34.16
Control for loading parameters from a local medium. Corresponds to SERVER PARAMETER PROTOCOL LOCAL and the presence of 'LOCAL' following the label 'Parameter Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

bootControlParamMop 1.3.6.1.4.1.33.1.34.17
Control for loading parameters via DEC MOP. Corresponds to SERVER PARAMETER PROTOCOL MOP and the presence of 'MOP' following the label 'Parameter Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

bootControlParamProprietary 1.3.6.1.4.1.33.1.34.18
Control for loading parameters via MRV In-Reach-proprietary extended MOP. Corresponds to SERVER PARAMETER PROTOCOL PROPRIETARY and the presence of 'Proprietary' following the label 'Parameter Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

bootControlParamRarpTftp 1.3.6.1.4.1.33.1.34.19
Control for loading parameters via the combination of RARP and TFTP. Corresponds to SERVER PARAMETER PROTOCOL RARPTFTP and the presence of 'RARP/TFTP' following the label 'Parameter Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

sysInstalledMemory 1.3.6.1.4.1.33.1.35
The total number of bytes of main memory installed in the system. Corresponds directly to the value labeled 'Installed' on the SERVER ALTERNATE STATUS display. A value of 0 indicates standard memory for the particular hardware.
OBJECT-TYPE    
  Gauge  

sysTemperatureLevel 1.3.6.1.4.1.33.1.36
The temperature level of the system. 'unknown' indicates the system does not support a temperature sensor. 'normal' indicates a normal temperature level. 'high' indicates an excessive temperature level. Corresponds directly to the value labeled 'Temperature Level:' in the SERVER ALTERNATE STATUS display.
OBJECT-TYPE    
  INTEGER unknown(1), normal(2), high(3)  

bootRecordTable 1.3.6.1.4.1.33.1.37
A list of boot control records.
OBJECT-TYPE    
  SEQUENCE OF  
    BootRecordEntry

bootRecordEntry 1.3.6.1.4.1.33.1.37.1
Values for a boot record.
OBJECT-TYPE    
  BootRecordEntry  

bootRecordIndex 1.3.6.1.4.1.33.1.37.1.1
An index value that uniquely identifies a boot control record entry, from 1 to the number of entries for the system.
OBJECT-TYPE    
  INTEGER  

bootRecordLoadInternetFile 1.3.6.1.4.1.33.1.37.1.2
The filename to request when loading an image via TFTP. Corresponds directly to SERVER INTERNET LOAD FILE and the value labeled 'Internet Load File:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

bootRecordLoadInternetServer 1.3.6.1.4.1.33.1.37.1.3
The internet address of the server to use when loading an image via TFTP. Corresponds directly to SERVER INTERNET LOAD HOST and the value labeled 'Internet Load Host:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  IpAddress  

bootRecordLoadInternetGateway 1.3.6.1.4.1.33.1.37.1.4
The internet address of the gateway to use when loading an image via TFTP. Corresponds directly to SERVER INTERNET LOAD GATEWAY and the value labeled 'Internet Load Gateway:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  IpAddress  

bootRecordLoadBootpTftp 1.3.6.1.4.1.33.1.37.1.5
Control for loading via the combination of BOOTP and TFTP. Corresponds to SERVER LOAD PROTOCOL BOOTPTFTP and the presence of 'BOOTP/TFTP/' following the label 'Load Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

bootRecordLoadTftpDirect 1.3.6.1.4.1.33.1.37.1.6
Control for loading via directed TFTP. Corresponds to SERVER LOAD PROTOCOL TFTPDIRECT and the presence of 'TFTPDIRECT' following the label 'Load Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

bootRecordLoadLocal 1.3.6.1.4.1.33.1.37.1.7
Control for loading from a local medium. Corresponds to SERVER LOAD PROTOCOL LOCAL and the presence of 'LOCAL' following the label 'Load Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

bootRecordLoadMop 1.3.6.1.4.1.33.1.37.1.8
Control for loading via DEC MOP. Corresponds to SERVER LOAD PROTOCOL MOP and the presence of 'MOP' following the label 'Load Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

bootRecordLoadProprietary 1.3.6.1.4.1.33.1.37.1.9
Control for loading via MRV In-Reach-proprietary extended MOP. Corresponds to SERVER LOAD PROTOCOL PROPRIETARY and the presence of 'Proprietary' following the label 'Load Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

bootRecordLoadRarpTftp 1.3.6.1.4.1.33.1.37.1.10
Control for loading via the combination of RARP and TFTP. Corresponds to SERVER LOAD PROTOCOL RARPTFTP and the presence of 'RARP/TFTP' following the label 'Load Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

bootRecordDumpBootpTftp 1.3.6.1.4.1.33.1.37.1.11
Control for dumping via the combination of BOOTP and TFTP. Corresponds to SERVER DUMP PROTOCOL BOOTPTFTP and the presence of 'BOOTP/TFTP' following the label 'Dump Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

bootRecordDumpLocal 1.3.6.1.4.1.33.1.37.1.12
Control for dumping to a local medium. Corresponds to SERVER DUMP PROTOCOL LOCAL and the presence of 'Local' following the label 'Dump Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

bootRecordDumpMop 1.3.6.1.4.1.33.1.37.1.13
Control for dumping via DEC MOP. Corresponds to SERVER DUMP PROTOCOL MOP and the presence of 'MOP' following the label 'Dump Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

bootRecordDumpProprietary 1.3.6.1.4.1.33.1.37.1.14
Control for dumping via MRV In-Reach-proprietary extended MOP. Corresponds to SERVER DUMP PROTOCOL PROPRIETARY and the presence of 'Proprietary' following the label 'Dump Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

bootRecordDumpRarpTftp 1.3.6.1.4.1.33.1.37.1.15
Control for dumping via the combination of RARP and TFTP. Corresponds to SERVER DUMP PROTOCOL RARPTFTP and the presence of 'RARP/TFTP' following the label 'Dump Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

bootRecordParamBootpTftp 1.3.6.1.4.1.33.1.37.1.16
Control for loading parameters via the combination of BOOTP and TFTP. Corresponds to SERVER PARAMETER PROTOCOL MOP and the presence of 'BOOTP/TFTP' following the label 'Parameter Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

bootRecordParamLocal 1.3.6.1.4.1.33.1.37.1.17
Control for loading parameters from a local medium. Corresponds to SERVER PARAMETER PROTOCOL LOCAL and the presence of 'LOCAL' following the label 'Parameter Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

bootRecordParamMop 1.3.6.1.4.1.33.1.37.1.18
Control for loading parameters via DEC MOP. Corresponds to SERVER PARAMETER PROTOCOL MOP and the presence of 'MOP' following the label 'Parameter Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

bootRecordParamProprietary 1.3.6.1.4.1.33.1.37.1.19
Control for loading parameters via MRV In-Reach proprietary extended MOP. Corresponds to SERVER PARAMETER PROTOCOL PROPRIETARY and the presence of 'Proprietary' following the label 'Parameter Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

bootRecordParamRarpTftp 1.3.6.1.4.1.33.1.37.1.20
Control for loading parameters via the combination of RARP and TFTP. Corresponds to SERVER PARAMETER PROTOCOL RARPTFTP and the presence of 'RARP/TFTP' following the label 'Parameter Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

bootRecordStatus 1.3.6.1.4.1.33.1.37.1.21
The status of the entry. Set to 'disabled' to disable the entry.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

bootRecordMopFile 1.3.6.1.4.1.33.1.37.1.22
The software file name to request for down-line load of the server via MOP or XMOP.
OBJECT-TYPE    
  DisplayString SIZE(0..15)  

bootRecordInternetAddress 1.3.6.1.4.1.33.1.37.1.23
The internet address of the system is to use for itself when loading via TFTP. The value 0.0.0.0 indicates default action.
OBJECT-TYPE    
  IpAddress  

bootRecordParamTftpDirect 1.3.6.1.4.1.33.1.37.1.24
Control for loading parameters via the protocol DTFTP. Corresponds to SERVER PARAMETER PROTOCOL DTFTP and the presence of 'DTFTP' following the label 'Parameter Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

bootRecordInternetDelimiter 1.3.6.1.4.1.33.1.37.1.25
The character separating the load file directory name from the file name.
OBJECT-TYPE    
  DisplayString SIZE(0..1)  

sysLastAgentError 1.3.6.1.4.1.33.1.38
The most recent error the agent encountered in attempting to satisfy an SNMP request. Reading this value has the side effect of resetting it to 'noError'.
OBJECT-TYPE    
  INTEGER noError(1), tooBig(2), noSuchName(3), badValue(4), readOnly(5), genErr(6), badCommunity(7), badVersion(8), badType(9), badClient(10)  

sysRcpMulticast 1.3.6.1.4.1.33.1.40
Control for sending of the MOP RCP system identifier message. Corresponds directly to the presence of 'RCP Multicast' under the label 'Enabled Characteristics' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

sysTimeServerAddress 1.3.6.1.4.1.33.1.41
The address of the time server, either an IpAddr or an ethernet address.
OBJECT-TYPE    
  TypedAddress  

sysTimeServerConfiguredAddress 1.3.6.1.4.1.33.1.46
The address of a configured time server (, either an IpAddr or an ethernet address).
OBJECT-TYPE    
  TypedAddress  

sysTimeServerConfiguredStatus 1.3.6.1.4.1.33.1.47
Control whether the sysTimeServerConfiguredAddress is the only time server used to obtain the time (REQUIRED), the first time server used to obtain the time (ENABLED), or not used to obtain the time (DISABLED).
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2), required(3)  

sysBootRecordOverrideDefinedAddress 1.3.6.1.4.1.33.1.48
Control to override the internally defined Internet address with that obtained from the bootp loading protocol.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

sysBootRecordMessageEnable 1.3.6.1.4.1.33.1.49
Control to display load status messages during reboot. Corresponds directly to the value labeled 'Status Message:' in the SERVER LOADDUMP display.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

sysBootRecordParamDefaults 1.3.6.1.4.1.33.1.50
Control to use default parameters upon the next reboot after which time this control reverts to disabled. This control only applies to stand-alone devices. Corresponds directly to the value labeled 'Default Parameters:' in the SERVER LOADDUMP display.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

sysLoginAuthFailureTrapType 1.3.6.1.4.1.33.1.78
Indicates the type of authentication failure which last occurred.
OBJECT-TYPE    
  INTEGER none(1), loginPassword(2), pap(3), chap(4), kerberos(5), securId(6), radius(7), privilegedPassword(8), limitedPrivilegedPassword(9)  

sysLoginAuthTrapIdentity 1.3.6.1.4.1.33.1.81
An identification string for the circuit or port where an authentication failure last occurred.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

sysLocalScriptServer 1.3.6.1.4.1.33.1.82
Control to allow script serving for this system from a script residing in a local flash card.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

sysInReachManagementSecurityStatus 1.3.6.1.4.1.33.1.83
Indicates whether per port authentication is in use. This includes username, password, privilege level, and list of power outlets controlled by that user, or console connections allowed from that port.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

sysProductName 1.3.6.1.4.1.33.1.84
Displays the product name of this system.
OBJECT-TYPE    
  DisplayString  

sysModemPresent 1.3.6.1.4.1.33.1.85
Indicates whether this system has a built-in modem.
OBJECT-TYPE    
  INTEGER noModem(1), modem(2)  

sysCauseAction 1.3.6.1.4.1.33.1.86
A control for toggling the cause action feature. Corresponds directly to the presence of 'Trigger/Action' under the label 'Enabled Characteristics:' in the SERVER CHARACTERISTICS display. The desired change will not take effect until the next system initialization.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

sysWebServerConfigAdminStatus 1.3.6.1.4.1.33.1.87
A control for bring the web server up or down. Corresponds directly to the presence of 'Web Server' under the label 'Enabled Characteristics:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

sysTl1SourceIdentifier 1.3.6.1.4.1.33.1.88
The source identifier (SID) is the server name used by TL1 to identify the server.
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

sysInitializeDelayParameter 1.3.6.1.4.1.33.1.89
Control to begin the system initialization process providing that at least one parameter server is current. Corresponds directly to the INITIALIZE DELAY PARAMETER command. In response to a get-request or get-next-request, the agent always returns 'ready' for this value.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

sysTimeProtocol 1.3.6.1.4.1.33.1.90
Indicates whether the SNTP protocol is used to obtain the time at startup. If disabled, the older TIMED protocol is used. Both protocols run over UDP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

sysTimeBroadcast 1.3.6.1.4.1.33.1.91
Indicates whether the unit will broadcast for the time at startup.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

characterDep 1.3.6.1.4.1.33.2
OBJECT IDENTIFIER    

xLat 1.3.6.1.4.1.33.3
OBJECT IDENTIFIER    

latAnnounceServices 1.3.6.1.4.1.33.3.1
Control for automatic, periodic announcement of local services to the network. Corresponds directly to SERVER ANNOUNCEMENTS and the presence of the label 'Announcements' following the label 'Enabled Characteristics:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

latCircuitTimer 1.3.6.1.4.1.33.3.2
Number of milleseconds to collect port input data before sending it to the host. Corresponds directly to SERVER CIRCUIT TIMER and the value labeled 'Circuit Timer:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 30..200  

latIdentificationLengthLimit 1.3.6.1.4.1.33.3.3
Maximum number of characters to store in the instances of latVisibleServiceIdentification. Corresponds directly to SERVER IDENTIFICATION SIZE and the value labeled 'Identification Size:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..63  

latKeepaliveTimer 1.3.6.1.4.1.33.3.4
Number of seconds of inactivity before sending a null message to the host. Corresponds directly to SERVER KEEPALIVE TIMER and the value labeled 'Keepalive Timer:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 10..180  

latMulticastTimer 1.3.6.1.4.1.33.3.5
Number of seconds between transmission of local service announcements. Corresponds directly to SERVER MULTICAST TIMER and the value labeled 'Multicast Timer:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 10..180  

latNodeLimit 1.3.6.1.4.1.33.3.6
Maximum number of service nodes to keep in the node table. Corresponds directly to SERVER NODE LIMIT and the value labeled 'Node Limit:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 1..1000  

latNumber 1.3.6.1.4.1.33.3.7
An arbitrary number assigned and used for administrative purposes. Corresponds directly to SERVER NUMBER and the value labeled 'Number:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..32767  

latRetransmitLimit 1.3.6.1.4.1.33.3.8
Maximum number of times to retransmit an unacknowledged message. Corresponds directly to SERVER RETRANSMIT LIMIT and the value labeled 'Retransmit Limit:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 4..120  

latLocalServiceGroups 1.3.6.1.4.1.33.3.9
The list of group numbers allowed to use local services, where a group number is in the range 0-255. The OCTET STRING contains a bitmap, with one bit for each group. Corresponding bit numbers start with 0 as the high-order bit of the first octet. Corresponds directly to SERVER SERVICE GROUPS and the value labeled 'Service Groups:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  OCTET STRING SIZE(32)  

latGroupPurge 1.3.6.1.4.1.33.3.10
Control for automatic deletion of all node table entries when latServiceGroups or latPortCurrentGroups is changed. Corresponds directly to SERVER PURGE GROUP and the presence of the label 'Purge Group' following the label 'Enabled Characteristics:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

latNodePurge 1.3.6.1.4.1.33.3.11
Control for automatic deletion of all node table entries with status 'reachable' when the number of entries exceeds latNodeLimit. Corresponds directly to SERVER PURGE NODE and the presence of the label 'Purge Node' following the label 'Enabled Characteristics:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

latNodesRejected 1.3.6.1.4.1.33.3.12
Number of nodes not added to the node table because there was no room. Corresponds directly to the value labeled 'Discarded Nodes:' in the SERVER STATUS display.
OBJECT-TYPE    
  Counter  

latInMessages 1.3.6.1.4.1.33.3.13
Number of LAT messages received. Corresponds directly to the value labeled 'Messages Received:' in the SERVER COUNTERS display.
OBJECT-TYPE    
  Counter  

latOutMessages 1.3.6.1.4.1.33.3.14
Number of LAT messages sent. Corresponds directly to the value labeled 'Messages Transmitted:' in the SERVER COUNTERS display.
OBJECT-TYPE    
  Counter  

latInSessionsAccepted 1.3.6.1.4.1.33.3.15
Number of incoming LAT session connection attempts accepted. Corresponds directly to the value labeled 'Solicitations Accepted:' in the SERVER COUNTERS display.
OBJECT-TYPE    
  Counter  

latInSessionsRejected 1.3.6.1.4.1.33.3.16
Number of incoming LAT session connection attempts rejected. Corresponds directly to the value labeled 'Solicitations Rejected:' in the SERVER COUNTERS display.
OBJECT-TYPE    
  Counter  

latAddressChange 1.3.6.1.4.1.33.3.17
Number of times a service announcement contained a node name already in the visible service table but with a different address. Corresponds directly to the value labeled 'Multiple Node Addresses:' in the SERVER COUNTERS display.
OBJECT-TYPE    
  Counter  

latInDuplicates 1.3.6.1.4.1.33.3.18
Number of duplicate LAT messages received. Corresponds directly to the value labeled 'Duplicates Received:' in the SERVER COUNTERS display.
OBJECT-TYPE    
  Counter  

latOutRetransmits 1.3.6.1.4.1.33.3.19
Number of LAT messages retransmitted due to no acknowledgement. Corresponds directly to the value labeled 'Messages Re-transmitted:' in the SERVER COUNTERS display.
OBJECT-TYPE    
  Counter  

latInBadMessages 1.3.6.1.4.1.33.3.20
Number of LAT messages received with invalid format. Corresponds directly to the value labeled 'Illegal Messages Rcv'd:' in the SERVER COUNTERS display.
OBJECT-TYPE    
  Counter  

latInBadSlots 1.3.6.1.4.1.33.3.21
Number of LAT messages received with invalid slot format. Corresponds directly to the value labeled 'Illegal Slots Rcv'd:' in the SERVER COUNTERS display.
OBJECT-TYPE    
  Counter  

latInBadMulticasts 1.3.6.1.4.1.33.3.22
Number of multicast LAT messages received with invalid format. Corresponds directly to the value labeled 'Illegal Multicasts Rcv'd:' in the SERVER COUNTERS display.
OBJECT-TYPE    
  Counter  

latPortTable 1.3.6.1.4.1.33.3.23
A list of LAT character port entries.
OBJECT-TYPE    
  SEQUENCE OF  
    LatPortEntry

latPortEntry 1.3.6.1.4.1.33.3.23.1
LAT parameter values for a port.
OBJECT-TYPE    
  LatPortEntry  

latPortIndex 1.3.6.1.4.1.33.3.23.1.1
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Character MIB [11].
OBJECT-TYPE    
  INTEGER  

latPortAuthorizedGroups 1.3.6.1.4.1.33.3.23.1.2
The list of group numbers to which the port is allowed to set access, where a group number is in the range 0-255. The OCTET STRING contains a bitmap, with one bit for each group. Corresponding bit numbers start with 0 as the high-order bit of the first octet. Corresponds directly to PORT AUTHORIZED GROUPS and the value labeled 'Authorized Groups:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  OCTET STRING SIZE(32)  

latPortAutoPrompt 1.3.6.1.4.1.33.3.23.1.3
Control for automatic stimulation of a host prompt upon forming a new session. Corresponds directly to PORT AUTOPROMPT and the presence of the label 'Autoprompt' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

latPortCurrentGroups 1.3.6.1.4.1.33.3.23.1.4
The list of group numbers to which the port currently has set access, where a group number is in the range 0-255. The OCTET STRING contains a bitmap, with one bit for each group. Corresponding bit numbers start with 0 as the high-order bit of the first octet. Corresponds directly to PORT GROUPS and the value labeled 'Groups:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  OCTET STRING SIZE(32)  

latPortRemoteModification 1.3.6.1.4.1.33.3.23.1.5
Control to allow the remote system to modify certain physical port characteristics. Corresponds directly to PORT REMOTE MODIFICATION and the presence of the label 'Remote Modification' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

latOfferedServiceTable 1.3.6.1.4.1.33.3.24
A list of offered service entries.
OBJECT-TYPE    
  SEQUENCE OF  
    LatOfferedServiceEntry

latOfferedServiceEntry 1.3.6.1.4.1.33.3.24.1
Parameter values for an offered service entry.
OBJECT-TYPE    
  LatOfferedServiceEntry  

latOfferedServiceName 1.3.6.1.4.1.33.3.24.1.1
The name of an offered service. Corresponds directly to the name in a SERVICE command and the value labeled 'Service:' in the SERVICE CHARACTERISTICS display.
OBJECT-TYPE    
  DisplayString SIZE(1..16)  

latOfferedServiceStatus 1.3.6.1.4.1.33.3.24.1.2
The status of the entry. Set to 'invalid' to remove the entry, which corresponds directly to the CLEAR SERVICE command. Actual removal of the entry is implementation specific.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

latOfferedServiceAllowConnections 1.3.6.1.4.1.33.3.24.1.3
Control for allowing incoming connections to the service. Corresponds directly to SERVICE CONNECTIONS and the presence of the label 'Connections' following the label 'Enabled Characteristics:' in the SERVICE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

latOfferedServiceIdentification 1.3.6.1.4.1.33.3.24.1.4
Text to identify a service. Corresponds directly to SERVICE IDENTIFICATION and the value labeled 'Identification:' in the SERVICE CHARACTERISTICS display.
OBJECT-TYPE    
  DisplayString SIZE(0..63)  

latOfferedServicePassword 1.3.6.1.4.1.33.3.24.1.5
The password a user must supply to use the service. Corresponds directly to SERVICE PASSWORD and the presence of the label 'Password' following the label 'Enabled Characteristics:' in the SERVICE CHARACTERISTICS display. When setting this value, the management system must supply eight octets, filling with zeros from the first octet. That is, the value '1ab42' would be expressed as '0.0.0.0.0.1.ab.42'. Setting the value to zero disables the password check. When returning this value, the agent always returns a zero length OCTET STRING.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

latOfferedServicePortMap 1.3.6.1.4.1.33.3.24.1.6
The list of character ports offer the service. The OCTET STRING contains a bitmap, with one bit for each port, and enough octets for all the ports on the system. Port numbers are as defined for charPortIndex in the Character MIB [11]. Corresponding bit numbers start with 1 as the high-order bit of the first octet. Corresponds directly to port-list portion of SERVICE PORTS and the value labeled 'Ports:' in the SERVICE CHARACTERISTICS display.
OBJECT-TYPE    
  OCTET STRING  

latOfferedServiceQueuing 1.3.6.1.4.1.33.3.24.1.7
Control for allowing queuing of incoming connections to the service when the service is busy. Corresponds directly to SERVICE QUEUE and the presence of the label 'Queuing' following the label 'Enabled Characteristics:' in the SERVICE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

latOfferedServiceEnvironmentalManager 1.3.6.1.4.1.33.3.24.1.8
Control indicating whether Environmental Management services are offered.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

latVisibleServiceTable 1.3.6.1.4.1.33.3.25
A list of visible service entries.
OBJECT-TYPE    
  SEQUENCE OF  
    LatVisibleServiceEntry

latVisibleServiceEntry 1.3.6.1.4.1.33.3.25.1
Parameter values for a visible service entry.
OBJECT-TYPE    
  LatVisibleServiceEntry  

latVisibleServiceName 1.3.6.1.4.1.33.3.25.1.1
The name of a visible service. Corresponds directly to the name in a SERVICE command and the value labeled 'Service Name' in the SERVICE SUMMARY display.
OBJECT-TYPE    
  DisplayString SIZE(1..16)  

latVisibleServiceStatus 1.3.6.1.4.1.33.3.25.1.2
Status of communication with the service. Corresponds directly to the value labeled 'Status' in the SERVICE SUMMARY display.
OBJECT-TYPE    
  INTEGER available(1), unavailable(2), unknown(3), unreachable(4), reachable(5), connected(6)  

latVisibleServiceNode 1.3.6.1.4.1.33.3.25.1.3
Name of a node offering the service. Corresponds directly to the value labeled Node Name in the SERVICE STATUS display.
OBJECT-TYPE    
  DisplayString SIZE(1..16)  

latVisibleServiceConnectedSessions 1.3.6.1.4.1.33.3.25.1.4
Number of connected sessions to the service. Corresponds directly to the number with the value 'Connected', labeled 'Status' in the SERVICE SUMMARY display.
OBJECT-TYPE    
  Gauge  

latVisibleServiceIdentification 1.3.6.1.4.1.33.3.25.1.5
Text to identify a service. The length is subject to limitation by latIdentificationLengthLimit. Corresponds directly to the value labeled 'Identification:' in the SERVICE SUMMARY display.
OBJECT-TYPE    
  DisplayString SIZE(0..63)  

latVisibleServiceRating 1.3.6.1.4.1.33.3.25.1.6
Relative capacity of the service to accept additional sessions. Corresponds directly to value labeled Rating in the SERVICE STATUS display.
OBJECT-TYPE    
  Gauge  

latNodeTable 1.3.6.1.4.1.33.3.26
A list of node entries.
OBJECT-TYPE    
  SEQUENCE OF  
    LatNodeEntry

latNodeEntry 1.3.6.1.4.1.33.3.26.1
Parameter values for a node entry.
OBJECT-TYPE    
  LatNodeEntry  

latNodeName 1.3.6.1.4.1.33.3.26.1.1
The name of a node. Corresponds directly to the value labeled 'Node:' in the NODE STATUS display.
OBJECT-TYPE    
  DisplayString SIZE(1..16)  

latNodeStatus 1.3.6.1.4.1.33.3.26.1.2
Status of communication with the node. Corresponds directly to the value labeled 'Status' in the NODE STATUS display.
OBJECT-TYPE    
  INTEGER available(1), unavailable(2), unknown(3), unreachable(4), reachable(5), connected(6)  

latNodeConnectedSessions 1.3.6.1.4.1.33.3.26.1.3
Number of connected sessions to the node. Corresponds directly to the number with the value 'Connected', labeled 'Status' in the NODE STATUS display.
OBJECT-TYPE    
  Gauge  

latNodeAddress 1.3.6.1.4.1.33.3.26.1.4
Ethernet address of the node. Corresponds directly to the value labeled 'Address:' in the NODE STATUS display.
OBJECT-TYPE    
  OCTET STRING SIZE(6)  

latNodeDataLinkFrame 1.3.6.1.4.1.33.3.26.1.5
Maximum Ethernet frame used by the node. Corresponds directly to the value labeled 'Data Link Frame Size:' in the NODE STATUS display.
OBJECT-TYPE    
  INTEGER  

latNodeIdentification 1.3.6.1.4.1.33.3.26.1.6
Text that identifies the node. The size is subject to limitation by latIdentificationLengtLimit. Corresponds directly to the value labeled 'Identification' in the NODE STATUS display.
OBJECT-TYPE    
  DisplayString SIZE(0..63)  

latNodeGroups 1.3.6.1.4.1.33.3.26.1.7
The list of group numbers to which the node belongs, where a group number is in the range 0-255. The OCTET STRING contains a bitmap, with one bit for each group. Corresponding bit numbers start with 0 as the high-order bit of the first octet. Corresponds directly to the value labeled 'Node Groups:' in the NODE STATUS display.
OBJECT-TYPE    
  OCTET STRING SIZE(32)  

latNodeServiceNumber 1.3.6.1.4.1.33.3.26.1.8
Number of entries for the node in the node service table. Corresponds indirectly to the list of services in the NODE STATUS display.
OBJECT-TYPE    
  Gauge  

latNodeZero 1.3.6.1.4.1.33.3.26.1.9
Control to zero counters kept for the node. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' causes all the system's counters to be zeroed. Corresponds to the ZERO NODE command.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

latNodeZeroTime 1.3.6.1.4.1.33.3.26.1.10
The number of hundredths of a second since the most recent zeroing of the counters kept for the node, such as through execution of sysZeroAll or latNodeZero. Corresponds directly to the value labeled 'Seconds Since Zeroed:' in the NODE COUNTERS display.
OBJECT-TYPE    
  TimeTicks  

latNodeInMessages 1.3.6.1.4.1.33.3.26.1.11
The number of LAT messages received from the node. Corresponds directly to the value labeled 'Messages Received:' in the NODE COUNTERS display.
OBJECT-TYPE    
  Counter  

latNodeOutMessages 1.3.6.1.4.1.33.3.26.1.12
The number of LAT messages sent to the node. Corresponds directly to the value labeled 'Messages Transmitted:' in the NODE COUNTERS display.
OBJECT-TYPE    
  Counter  

latNodeInSlots 1.3.6.1.4.1.33.3.26.1.13
The number of LAT slots received from the node. Corresponds directly to the value labeled 'Slots Received:' in the NODE COUNTERS display.
OBJECT-TYPE    
  Counter  

latNodeOutSlots 1.3.6.1.4.1.33.3.26.1.14
The number of LAT slots sent to the node. Corresponds directly to the value labeled 'Slots Transmitted:' in the NODE COUNTERS display.
OBJECT-TYPE    
  Counter  

latNodeInBytes 1.3.6.1.4.1.33.3.26.1.15
The total number of bytes received from the node, including Ethernet overhead. Corresponds directly to the value labeled 'Bytes Received:' in the NODE COUNTERS display.
OBJECT-TYPE    
  Counter  

latNodeOutBytes 1.3.6.1.4.1.33.3.26.1.16
The total number of bytes sent to the node, including Ethernet overhead. Corresponds directly to the value labeled 'Bytes Transmitted:' in the NODE COUNTERS display.
OBJECT-TYPE    
  Counter  

latNodeAddressChange 1.3.6.1.4.1.33.3.26.1.17
The number of times a LAT message multicast by the node had a different Ethernet address from the previous time. Corresponds directly to the value labeled 'Multiple Node Addresses:' in the NODE COUNTERS display.
OBJECT-TYPE    
  Counter  

latNodeInDuplicates 1.3.6.1.4.1.33.3.26.1.18
The number of duplicate LAT message received from the node. Corresponds directly to the value labeled 'Duplicates Received:' in the NODE COUNTERS display.
OBJECT-TYPE    
  Counter  

latNodeOutRetransmits 1.3.6.1.4.1.33.3.26.1.19
The number of LAT message retransmitted to the node due to lack of acknowledgement. Corresponds directly to the value labeled 'Messages Re-transmitted:' in the NODE COUNTERS display.
OBJECT-TYPE    
  Counter  

latNodeInBadMessages 1.3.6.1.4.1.33.3.26.1.20
The number of LAT message received from the node with invalid format. Corresponds directly to the value labeled 'Illegal Messages Received:' in the NODE COUNTERS display.
OBJECT-TYPE    
  Counter  

latNodeInBadSlots 1.3.6.1.4.1.33.3.26.1.21
The number of LAT slots received from the node with invalid format. Corresponds directly to the value labeled 'Illegal Slots Received:' in the NODE COUNTERS display.
OBJECT-TYPE    
  Counter  

latNodeInSessionsAccepted 1.3.6.1.4.1.33.3.26.1.22
The number of LAT session connection attempts received from the node and accepted. Corresponds directly to the value labeled 'Solicitations Accepted:' in the NODE COUNTERS display.
OBJECT-TYPE    
  Counter  

latNodeInSessionsRejected 1.3.6.1.4.1.33.3.26.1.23
The number of LAT session connection attempts received from the node and rejected. Corresponds directly to the value labeled 'Solicitations Rejected:' in the NODE COUNTERS display.
OBJECT-TYPE    
  Counter  

latSolicits 1.3.6.1.4.1.33.3.27
Control for multicast solicitation of LAT services. Corresponds directly to SERVER LAT SOLICITAIONS and the presence of the label 'LAT SOLICITATIONS' following the label 'Enabled Characteristics:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

latImmediateAck 1.3.6.1.4.1.33.3.28
Control for LAT to provide an immediate ACK, and not to wait for the timer to expire. Corresponds directly to SERVER LAT IMMEDIATE ACK and the presence of the label 'LAT Immediate Ack following the label 'Enabled Characteristics:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

xInternetDep 1.3.6.1.4.1.33.4
OBJECT IDENTIFIER    

xBootServer 1.3.6.1.4.1.33.6
OBJECT IDENTIFIER    

xBsBasic 1.3.6.1.4.1.33.6.1
OBJECT IDENTIFIER    

basicLogLimit 1.3.6.1.4.1.33.6.1.1
Maximum allowed number of kilobytes for recording events. Corresponds directly to MANAGER LOG FILE SIZE and the value labeled 'Log File Size:' in the MANAGER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 1..100  

basicActiveLimit 1.3.6.1.4.1.33.6.1.2
Maximum allowed number of simultaneous service dialogs. Corresponds directly to MANAGER SIMULTANEOUS and the value labeled 'Maximum simultaneous requests:' in the MANAGER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..32  

basicActiveNumber 1.3.6.1.4.1.33.6.1.3
Number of active service dialogs. Corresponds indirectly to the list of active clients in the MANAGER STATUS display.
OBJECT-TYPE    
  Gauge  

basicClientNumber 1.3.6.1.4.1.33.6.1.4
Number of defined clients. Corresponds indirectly to the list of defined clients in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays.
OBJECT-TYPE    
  Gauge  

basicOffersSent 1.3.6.1.4.1.33.6.1.5
Total number of service offers sent in response to client requests. Corresponds directly to the value labeled 'Total service offers sent:' in the MANAGER STATUS display.
OBJECT-TYPE    
  Counter  

basicEventTotal 1.3.6.1.4.1.33.6.1.6
Total number of events that have been written to the event log since it was last purged. This may be less than the number currently in the log. Corresponds directly to the value labeled 'Total Messages Logged:' in the MANAGER EVENTS display.
OBJECT-TYPE    
  Gauge  

basicEventPurge 1.3.6.1.4.1.33.6.1.7
Control to cause emptying the event log. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' causes the event log to immediately become empty. Corresponds directly to the PURGE MANAGER LOG FILE command.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

activeTable 1.3.6.1.4.1.33.6.1.8
A list of active client dialog entries. The number of entries is given by basicActiveNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    ActiveEntry

activeEntry 1.3.6.1.4.1.33.6.1.8.1
Parameter values for an active client dialog entry.
OBJECT-TYPE    
  ActiveEntry  

activeIdentificationType 1.3.6.1.4.1.33.6.1.8.1.1
The type of identification value in activeIdentification. Corresponds indirectly to the value labeled 'EthernetAddress' in the MANAGER STATUS display.
OBJECT-TYPE    
  AddressType  

activeIdentification 1.3.6.1.4.1.33.6.1.8.1.2
Identification of the active partner. Corresponds directly to the value labeled 'EthernetAddress' in the MANAGER STATUS display.
OBJECT-TYPE    
  OCTET STRING SIZE(1..6)  

activeFunction 1.3.6.1.4.1.33.6.1.8.1.3
The function the server is performing with the partner. Corresponds directly to the value labeled 'Function' in the MANAGER STATUS display.
OBJECT-TYPE    
  INTEGER parameterStore(1), load(2), dump(3), imageUpdate(4)  

activeSoftwareVersionType 1.3.6.1.4.1.33.6.1.8.1.4
If activeFunction is 'load', the software version being sent to the client, otherwise 'notApplicable'. Corresponds to the letter in the software version labeled 'Version' in the MANAGER STATUS display. alpha 'A': alpha test beta 'B': beta test production null: normal, production software special 'S': special, custom software diagnostic 'D': diagnostic, debug software
OBJECT-TYPE    
  INTEGER alpha(1), beta(2), production(3), special(4), diagnostic(5), notApplicable(6)  

activeSoftwareVersion 1.3.6.1.4.1.33.6.1.8.1.5
If activeFunction is 'load', the 4-byte software version being sent to the client, otherwise zero length. In order, the octets contain major version, minor version, ECO, and pre-release number. Corresponds to the numbers in the software version labeled 'Version' in the MANAGER STATUS display. For example, the version display for activeSoftwareVersionType 'production' and activeSoftwareVersion '2.2.0.0' is 'V2.2'. The version display for activeSoftwareVersionType 'beta' and activeSoftwareVersion '3.1.0.4' is 'V3.1B4'.
OBJECT-TYPE    
  OCTET STRING SIZE(0..4)  

activeParameterVersion 1.3.6.1.4.1.33.6.1.8.1.6
If activeFunction is 'parameterStore', the parameter version being stored by the client, otherwise zero. Corresponds directly to the value labeled 'Version' in the MANAGER STATUS display.
OBJECT-TYPE    
  INTEGER  

activeCurrentSequence 1.3.6.1.4.1.33.6.1.8.1.7
The current dialog sequence number. Corresponds directly to the value labeled 'Seq' in the MANAGER STATUS display.
OBJECT-TYPE    
  INTEGER  

activeBytesRemaining 1.3.6.1.4.1.33.6.1.8.1.8
The number of bytes remaining to be transferred in the dialog. Corresponds directly to the value labeled 'Left' in the MANAGER STATUS display.
OBJECT-TYPE    
  INTEGER  

activeFile 1.3.6.1.4.1.33.6.1.8.1.9
The name of the file being used in the dialog. Corresponds directly to the value labeled 'File' in the MANAGER STATUS display.
OBJECT-TYPE    
  DisplayString SIZE(1..64)  

activeStatus 1.3.6.1.4.1.33.6.1.8.1.10
The final status of the most recent attempt to get an image. Corresponds directly to the value labeled 'Get Status:' in the DEVICE STATUS display.
OBJECT-TYPE    
  DialogStatus  

activeState 1.3.6.1.4.1.33.6.1.8.1.11
The dynamic state of an active attempt to get an image. Corresponds directly to the value labeled 'Get State:' in the DEVICE STATUS display.
OBJECT-TYPE    
  INTEGER idle(1), internal1(2), internal2(3), openPartner(4), openFile(5), receivePartner(6), writeFile(7), closePartner(8), closeFile(9), cleanup(10), done(11), error(12)  

clientTable 1.3.6.1.4.1.33.6.1.9
A list of client data base entries. The number of entries is given by basicClientNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    ClientEntry

clientEntry 1.3.6.1.4.1.33.6.1.9.1
Parameter values for a client data base entry.
OBJECT-TYPE    
  ClientEntry  

clientIdentificationType 1.3.6.1.4.1.33.6.1.9.1.1
The type of identification value in clientIdentification. Corresponds directly to MANAGER NODE, MANAGER GLOBAL, and MANAGER LOCAL, and the value labeled 'Ethernet Address' in the MANAGER NODE display or 'Ethernet Address', 'Device', and 'Global Devices' or 'Local Devices' in the MANAGER GLOBAL and LOCAL displays.
OBJECT-TYPE    
  AddressType  

clientIdentification 1.3.6.1.4.1.33.6.1.9.1.2
Identification of the client, either a hardware type or an Ethernet address, depending on clientIdentificationType. Corresponds directly to MANAGER NODE, MANAGER GLOBAL, and MANAGER LOCAL, and the value labeled 'Ethernet Address' in the MANAGER NODE display or 'Ethernet Address', 'Device', and 'Global Devices' or 'Local Devices' in the MANAGER GLOBAL and LOCAL displays.
OBJECT-TYPE    
  OCTET STRING SIZE(1..6)  

clientEntryStatus 1.3.6.1.4.1.33.6.1.9.1.3
The status of the entry. Set to 'invalid' to remove the entry, which corresponds directly to the PURGE LOCAL, PURGE GLOBAL, and PURGE NODE commands. Actual removal of the entry is implementation specific.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

clientName 1.3.6.1.4.1.33.6.1.9.1.4
A name that may be used to identify the client. Corresponds directly to the value labeled 'Name' in the MANAGER NODE display.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

clientLoadFile 1.3.6.1.4.1.33.6.1.9.1.5
The file with the client's load image. Corresponds directly to the value labeled 'Load File' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

clientDiagnosticFile 1.3.6.1.4.1.33.6.1.9.1.6
The file with the client's diagnostic test image. Corresponds directly to the value labeled 'Diag File' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

clientLoadService 1.3.6.1.4.1.33.6.1.9.1.7
Control for allowing load service for the client. Corresponds directly to the value labeled 'Load' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

clientDumpService 1.3.6.1.4.1.33.6.1.9.1.8
Control for allowing dump service for the client. Corresponds directly to the value labeled 'Dump' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

namedTable 1.3.6.1.4.1.33.6.1.10
A list of named client data base entries. The number of entries is given by basicClientNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    NamedEntry

namedEntry 1.3.6.1.4.1.33.6.1.10.1
Parameter values for a named client data base entry.
OBJECT-TYPE    
  NamedEntry  

namedIdentificationType 1.3.6.1.4.1.33.6.1.10.1.1
The type of identification value in namedIdentification. Corresponds directly to MANAGER NODE, MANAGER GLOBAL, and MANAGER LOCAL, and the value labeled 'Ethernet Address' in the MANAGER NODE display or 'Ethernet Address', 'Device', and 'Global Devices' or 'Local Devices' in the MANAGER GLOBAL and LOCAL displays.
OBJECT-TYPE    
  AddressType  

namedIdentification 1.3.6.1.4.1.33.6.1.10.1.2
Identification of the client, either a hardware type or an Ethernet address, depending on namedIdentificationType. Corresponds directly to MANAGER NODE, MANAGER GLOBAL, and MANAGER LOCAL, and the value labeled 'Ethernet Address' in the MANAGER NODE display or 'Ethernet Address', 'Device', and 'Global Devices' or 'Local Devices' in the MANAGER GLOBAL and LOCAL displays.
OBJECT-TYPE    
  OCTET STRING SIZE(1..6)  

namedEntryStatus 1.3.6.1.4.1.33.6.1.10.1.3
The status of the entry. Set to 'invalid' to remove the entry, which corresponds directly to the PURGE LOCAL, PURGE GLOBAL, and PURGE NODE commands. Actual removal of the entry is implementation specific.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

namedName 1.3.6.1.4.1.33.6.1.10.1.4
A name that may be used to identify the client. Corresponds directly to the value labeled 'Name' in the MANAGER NODE display.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

namedLoadFile 1.3.6.1.4.1.33.6.1.10.1.5
The file with the client's load image. Corresponds directly to the value labeled 'Load File' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

namedDiagnosticFile 1.3.6.1.4.1.33.6.1.10.1.6
The file with the client's diagnostic test image. Corresponds directly to the value labeled 'Diag File' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

namedLoadService 1.3.6.1.4.1.33.6.1.10.1.7
Control for allowing load service for the client. Corresponds directly to the value labeled 'Load' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

namedDumpService 1.3.6.1.4.1.33.6.1.10.1.8
Control for allowing dump service for the client. Corresponds directly to the value labeled 'Dump' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

xEventTable 1.3.6.1.4.1.33.6.1.11
A list of event entries. The number of entries is given by basicEventNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    XEventEntry

xEventEntry 1.3.6.1.4.1.33.6.1.11.1
Parameter values for a event entry.
OBJECT-TYPE    
  XEventEntry  

xEventIndex 1.3.6.1.4.1.33.6.1.11.1.1
In identification number for an event. The value 1 indicates the oldest event in the file, with subsequent numbers indicating sequential events. The event text for a given number may change as a circular event log wraps over its beginning. Corresponds directly to the relative position of an event in the MANAGER EVENTS display.
OBJECT-TYPE    
  INTEGER  

xEventText 1.3.6.1.4.1.33.6.1.11.1.2
The text of the event, including date, time and other information. Corresponds directly to the individual event text in the MANAGER EVENTS display.
OBJECT-TYPE    
  DisplayString SIZE(1..255)  

basicDeviceNumber 1.3.6.1.4.1.33.6.1.12
The system's number of mass-storage devices.
OBJECT-TYPE    
  INTEGER  

deviceTable 1.3.6.1.4.1.33.6.1.13
A list of device entries. The number of entries is given by basicDeviceNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    DeviceEntry

deviceEntry 1.3.6.1.4.1.33.6.1.13.1
Parameter values for a device entry.
OBJECT-TYPE    
  DeviceEntry  

deviceIndex 1.3.6.1.4.1.33.6.1.13.1.1
In identification number for a device, in the range 1 to basicDeviceNumber
OBJECT-TYPE    
  INTEGER  

deviceName 1.3.6.1.4.1.33.6.1.13.1.2
A name by which the device is known in other displays, such as 'C1' or 'D2'.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

deviceDescr 1.3.6.1.4.1.33.6.1.13.1.3
Details of the device type, including, for example, size, manufacturer, Flash versus RAM, and such. Corresponds directly to the value labeled 'Device Type: in the MANAGER DEVICE STATUS display.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

deviceOperation 1.3.6.1.4.1.33.6.1.13.1.4
Current operational state of the device. Corresponds directly the value labeled 'Device Operation:' in the MANAGER DEVICE STATUS display.
OBJECT-TYPE    
  INTEGER read(1), write(2), format(3), idle(4), erase(5), paramStore(6), unpack(7), loadingClient(8)  

deviceFormat 1.3.6.1.4.1.33.6.1.13.1.5
Formatting status of the device. Corresponds directly the presence of one of the value labels under the label 'Device Status:' in the MANAGER DEVICE STATUS display.
OBJECT-TYPE    
  INTEGER unformatted(1), formatted(2), unknown(3)  

deviceProtection 1.3.6.1.4.1.33.6.1.13.1.6
Write-protect status of the device. Corresponds directly the presence of one of the value labels under the label 'Device Status:' in the MANAGER DEVICE STATUS display.
OBJECT-TYPE    
  INTEGER write-enabled(1), write-protected(2), unknown(3)  

deviceFormatMedium 1.3.6.1.4.1.33.6.1.13.1.7
Control to cause formatting of the medium in the device. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' causes the device to be formatted. Corresponds directly to the FORMAT DEVICE command.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

deviceGetFile 1.3.6.1.4.1.33.6.1.13.1.8
Control to cause getting a file to the device from a remote host system. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' causes the get to be attempted. Corresponds directly to the GET DEVICE command. When set to 'execute', the objects deviceGetFileHostIdentificationType, deviceGetFileHostIdentification, deviceGetFileName and deviceGetFileArea must be somewhere in the same set request message.
OBJECT-TYPE    
  INTEGER ready(1), execute(2), abort(3)  

deviceGetFileHostIdentificationType 1.3.6.1.4.1.33.6.1.13.1.9
The type of identification value in deviceIdentification. Corresponds indirectly to ADDRESS in the GET DEVICE command. This object may not be set outside the context of setting deviceGetFile to 'execute'. In response to a get-request or get-next-request, the value of this object is 'undefined'.
OBJECT-TYPE    
  AddressType  

deviceGetFileHostIdentification 1.3.6.1.4.1.33.6.1.13.1.10
Identification of the host to get the file from, with type depending on deviceIdentificationType. Corresponds directly to ADDRESS in the GET DEVICE command. This object may not be set outside the context of setting deviceGetFile to 'execute'. In response to a get-request or get-next-request, the value of this object is zero length.
OBJECT-TYPE    
  OCTET STRING SIZE(1..6)  

deviceGetFileName 1.3.6.1.4.1.33.6.1.13.1.11
The name of the file to get. Corresponds directly to LOAD FILE in the GET DEVICE command. This object may not be set outside the context of setting deviceGetFile to 'execute'. In response to a get-request or get-next-request, the value of this object is zero length.
OBJECT-TYPE    
  DisplayString SIZE(1..64)  

deviceGetFileArea 1.3.6.1.4.1.33.6.1.13.1.12
The area number in which to put the file. Corresponds directly to AREA in the GET DEVICE command. If it is not relevant to the particular device, it is ignored. This object may not be set outside the context of setting deviceGetFile to 'execute'. In response to a get-request or get-next-request, the value of this object is zero.
OBJECT-TYPE    
  INTEGER 1..16  

deviceFormatOption 1.3.6.1.4.1.33.6.1.13.1.13
Formatting option to apply. Corresponds directly to the OPTION in the FORMAT DEVICE command. This object may not be set outside the context of setting deviceFormatMedium to 'execute'. In response to a get-request or get-next-request, the value of this object is zero.
OBJECT-TYPE    
  INTEGER 1..3  

deviceFormatRedundantParams 1.3.6.1.4.1.33.6.1.13.1.14
Control for creating redundant parameter storage areas when formatting. Corresponds directly to NONREDUNDANT in the FORMAT DEVICE command. This object may not be set outside the context of setting deviceFormatMedium to 'execute'. In response to a get-request or get-next-request, the value of this object is zero.
OBJECT-TYPE    
  INTEGER nonredundant(1), redundant(2)  

devicePreviousStatus 1.3.6.1.4.1.33.6.1.13.1.15
Result of the immediately previous concluded boot dialog. Corresponds directly to the value labeled 'Get File Previous Status:' in the SHOW CARD STATUS display.
OBJECT-TYPE    
  DialogStatus  

xDump 1.3.6.1.4.1.33.6.2
OBJECT IDENTIFIER    

dumpService 1.3.6.1.4.1.33.6.2.1
Control for allowing dump service for any client. Corresponds directly to DUMP and the value labeled 'Dump:' in the MANAGER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

dumpDrive 1.3.6.1.4.1.33.6.2.2
Identification number of the disk drive where dumps are stored. Corresponds directly to DUMP DRIVE and the value labeled 'Dump Drive:' in the MANAGER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 1..2  

dumpMerit 1.3.6.1.4.1.33.6.2.3
Relative preference for this dump server over others. Corresponds directly to DUMP MERIT and the value labeled 'Dump Merit:' in the MANAGER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..15  

dumpSize 1.3.6.1.4.1.33.6.2.4
Type of dump file to keep. Corresponds directly to DUMP SIZE and the value labeled 'Dump Size:' in the MANAGER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER small(1), full(2)  

dumpCompleted 1.3.6.1.4.1.33.6.2.5
The number of dumps completed since system initialization. Corresponds directly to the value labeled 'Dump Operations Completed:' in the MANAGER STATUS display.
OBJECT-TYPE    
  Counter  

dumpActive 1.3.6.1.4.1.33.6.2.6
The number of dumps in progress. Corresponds directly to the value labeled 'Currently Dumping:' in the MANAGER STATUS display.
OBJECT-TYPE    
  Gauge  

dumpFileNumber 1.3.6.1.4.1.33.6.2.7
The number of dump files currently stored. Corresponds directly to the value labeled 'Network dump files' and 'files' in the MANAGER FILES display.
OBJECT-TYPE    
  Gauge  

dumpFileTable 1.3.6.1.4.1.33.6.2.8
A list of dump file entries. The number of entries is given by dumpFileNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    DumpFileEntry

dumpFileEntry 1.3.6.1.4.1.33.6.2.8.1
Parameter values for a dump file entry.
OBJECT-TYPE    
  DumpFileEntry  

dumpFileIdentificationType 1.3.6.1.4.1.33.6.2.8.1.1
The type of identification value in dumpFileIdentification. Corresponds indirectly to a file name part in the section labeled 'Network dump files' in the MANAGER FILES display.
OBJECT-TYPE    
  AddressType  

dumpFileIdentification 1.3.6.1.4.1.33.6.2.8.1.2
Identification of the dump file, an Ethernet address, as indicated by dumpFileIdentificationType. Corresponds indirectly to a file name part in the section labeled 'Network dump files' in the MANAGER FILES display.
OBJECT-TYPE    
  OCTET STRING SIZE(1..6)  

dumpFileEntryStatus 1.3.6.1.4.1.33.6.2.8.1.3
The status of the entry. Set to 'invalid' to remove the entry, which corresponds indirectly to the PURGE MANAGER DUMP FILES command. Actual removal of the entry is implementation specific.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

dumpFileCreation 1.3.6.1.4.1.33.6.2.8.1.4
The time the dump file was created. Corresponds directly to a date and time in the section labeled 'Network dump files' in the MANAGER FILES display.
OBJECT-TYPE    
  DateTime  

dumpFileSize 1.3.6.1.4.1.33.6.2.8.1.5
The number of bytes stored in the dump file. Corresponds directly to the value labeled 'bytes' in the section labeled 'Network dump files' in the MANAGER FILES display.
OBJECT-TYPE    
  INTEGER  

xLoad 1.3.6.1.4.1.33.6.3
OBJECT IDENTIFIER    

loadService 1.3.6.1.4.1.33.6.3.1
Control for allowing load service for any client. Corresponds directly to LOAD and the value labeled 'Load:' in the MANAGER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

loadMerit 1.3.6.1.4.1.33.6.3.2
Relative preference for this load server over others. Corresponds directly to LOAD MERIT and the value labeled 'Load Merit:' in the MANAGER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..15  

loadCompleted 1.3.6.1.4.1.33.6.3.3
The number of loads completed since system initialization. Corresponds directly to the value labeled 'Load Operations Completed:' in the MANAGER STATUS display.
OBJECT-TYPE    
  Counter  

loadActive 1.3.6.1.4.1.33.6.3.4
The number of loads in progress. Corresponds directly to the value labeled 'Currently Loading:' in the MANAGER STATUS display.
OBJECT-TYPE    
  Gauge  

loadFileNumber 1.3.6.1.4.1.33.6.3.5
The number of load files currently stored. Corresponds directly to the value labeled 'Load image files' and 'files' in the MANAGER FILES display.
OBJECT-TYPE    
  Gauge  

loadFileTable 1.3.6.1.4.1.33.6.3.6
A list of load file entries. The number of entries is given by loadFileNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    LoadFileEntry

loadFileEntry 1.3.6.1.4.1.33.6.3.6.1
Parameter values for a load file entry.
OBJECT-TYPE    
  LoadFileEntry  

loadFileName 1.3.6.1.4.1.33.6.3.6.1.1
The name of a load file. Corresponds directly to a file name part in the section labeled 'Load image files' in the MANAGER FILES display.
OBJECT-TYPE    
  DisplayString SIZE(1..16)  

loadFileCreation 1.3.6.1.4.1.33.6.3.6.1.2
The time the load file was created. Corresponds directly to a date and time in the section labeled 'Load image files' in the MANAGER FILES display.
OBJECT-TYPE    
  DateTime  

loadFileSize 1.3.6.1.4.1.33.6.3.6.1.3
The number of bytes stored in the load file. Corresponds directly to the value labeled 'bytes' in the section labeled 'Load image files' in the MANAGER FILES display.
OBJECT-TYPE    
  INTEGER  

loadFileSoftwareVersionType 1.3.6.1.4.1.33.6.3.6.1.4
The software version type of the image in the load file. Corresponds directly to a software version in the section labeled 'Load image files' in the MANAGER FILES display. alpha 'A': alpha test beta 'B': beta test production null: normal, production software special 'S': special, custom software
OBJECT-TYPE    
  INTEGER alpha(1), beta(2), production(3), special(4)  

loadFileSoftwareVersion 1.3.6.1.4.1.33.6.3.6.1.5
The software version of the image in the load file. Corresponds directly to a software version in the section labeled 'Load image files' in the MANAGER FILES display. For example, the version display for loadFileSoftwareVersionType 'production' and loadFileSoftwareVersion '2.2.0.0' is 'V2.2'. The version display for loadFileSoftwareVersionType 'beta' and loadFileSoftwareVersion '3.1.0.4' is 'V3.1B4'.
OBJECT-TYPE    
  OCTET STRING SIZE(0..4)  

xParam 1.3.6.1.4.1.33.6.4
OBJECT IDENTIFIER    

paramService 1.3.6.1.4.1.33.6.4.1
Control for allowing parameter storage service for any client. Corresponds directly to PARAMETER SERVICE and the value labeled 'Parameter Service:' in the MANAGER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

paramDefaultService 1.3.6.1.4.1.33.6.4.2
Control for allowing default parameter loading service for any client. Corresponds directly to PARAMETER DEFAULT SERVICE and the value labeled 'Parameter Default Service:' in the MANAGER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

paramDrive 1.3.6.1.4.1.33.6.4.3
Identification number of the disk drive where parameters are stored. Corresponds directly to PARAMETER DRIVE and the value labeled 'Parameter Drive:' in the MANAGER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 1..2  

paramActive 1.3.6.1.4.1.33.6.4.4
The number of params in progress. Corresponds directly to the value labeled 'Currently Paraming:' in the MANAGER STATUS display.
OBJECT-TYPE    
  Gauge  

paramStorageActive 1.3.6.1.4.1.33.6.4.5
The number of parameter storage operations in progress. Corresponds directly to the value labeled 'Currently saving parameters:' in the MANAGER STATUS display.
OBJECT-TYPE    
  Gauge  

paramFileNumber 1.3.6.1.4.1.33.6.4.6
The number of parameter files currently stored. Corresponds directly to the value labeled 'Parameter files' and 'files' in the MANAGER FILES display.
OBJECT-TYPE    
  Gauge  

paramFileTable 1.3.6.1.4.1.33.6.4.7
A list of param file entries. The number of entries is given by paramFileNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    ParamFileEntry

paramFileEntry 1.3.6.1.4.1.33.6.4.7.1
Parameter values for a param file entry.
OBJECT-TYPE    
  ParamFileEntry  

paramFileIdentificationType 1.3.6.1.4.1.33.6.4.7.1.1
The type of identification value in paramFileIdentification. Corresponds indirectly to a file name part in the section labeled 'Parameter files' in the MANAGER FILES display.
OBJECT-TYPE    
  AddressType  

paramFileIdentification 1.3.6.1.4.1.33.6.4.7.1.2
Identification of the param file, an Ethernet address, as indicated by paramFileIdentificationType. Corresponds indirectly to a file name part in the section labeled 'Parameter files' in the MANAGER FILES display.
OBJECT-TYPE    
  OCTET STRING SIZE(1..6)  

paramFileEntryStatus 1.3.6.1.4.1.33.6.4.7.1.3
The status of the entry. Set to 'invalid' to remove the entry, which corresponds indirectly to the PURGE MANAGER PARAMETER FILES command. Actual removal of the entry is implementation specific.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

paramFileWrite 1.3.6.1.4.1.33.6.4.7.1.4
The time the parameter file was last written. Corresponds directly to a date and time in the section labeled 'Parameter files' in the MANAGER FILES display.
OBJECT-TYPE    
  DateTime  

paramFileSize 1.3.6.1.4.1.33.6.4.7.1.5
The number of bytes stored in the param file. Corresponds directly to the value labeled 'bytes' in the section labeled 'Parameter files' in the MANAGER FILES display.
OBJECT-TYPE    
  INTEGER  

paramFileParameterVersion 1.3.6.1.4.1.33.6.4.7.1.6
The version number of the parameter data in the file. Corresponds directly to the value labeled 'ver' in the section labeled 'Parameter files' in the MANAGER FILES display.
OBJECT-TYPE    
  INTEGER  

xParamClient 1.3.6.1.4.1.33.7
OBJECT IDENTIFIER    

paramClientLoaderName 1.3.6.1.4.1.33.7.1
The name of the system that most recently provided this system's stored parameters. Corresponds directly to the name value labeled 'Loaded From:' in the PARAMETER SERVER display.
OBJECT-TYPE    
  DisplayString  

paramClientLoaderAddressType 1.3.6.1.4.1.33.7.2
The type of network address contained in paramClientLoaderAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'local' means there is no address and parameters were loaded from local storage. 'ip' is an Internet IP address. 'ethernet' is an 802.3 MAC address. Corresponds indirectly to the address value labeled 'Loaded From:' in the PARAMETER SERVER display.
OBJECT-TYPE    
  AddressType  

paramClientLoaderAddress 1.3.6.1.4.1.33.7.3
The network address of the system that most recently provided this system's stored parameters. Corresponds directly to the address value labeled 'Loaded From:' in the PARAMETER SERVER display.
OBJECT-TYPE    
  OCTET STRING  

paramClientParameterVersion 1.3.6.1.4.1.33.7.4
The version number of the parameters as stored in this system's local memory. Corresponds directly to SERVER PARAMETER VERSION and the value labeled 'Last Update Version:' in the PARAMETER SERVER display.
OBJECT-TYPE    
  INTEGER  

paramClientUpdateTime 1.3.6.1.4.1.33.7.5
This system's local date and time when it last attempted to store parameters with a parameter server. Corresponds directly to the values labeled 'Last Update Date:' and 'Last Update Time:' in the PARAMETER SERVER display.
OBJECT-TYPE    
  DateTime  

paramClientServerCheck 1.3.6.1.4.1.33.7.6
Control over whether or not this system is allowed to check for additional parameter servers. 'enabled' allows checking. Corresponds directly to PARAMETER SERVER CHECK and the presence of PARAMETER POLLING under the label 'Enabled Characteristics' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

paramClientCheckInterval 1.3.6.1.4.1.33.7.7
The number of minutes between checks for additional parameter servers. Corresponds directly to PARAMETER SERVER CHECK TIMER and the value labeled 'Check Timer:' in the PARAMETER SERVER display.
OBJECT-TYPE    
  INTEGER 1..120  

paramClientCheckNow 1.3.6.1.4.1.33.7.8
Control to cause this system to immediately check for additional parameter servers. The agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' causes a check to be started. Corresponds to the CHECK PARAMETER SERVER command.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

paramClientServerLimit 1.3.6.1.4.1.33.7.9
The maximum number of parameter servers this system is allowed to remember at the same time. Corresponds directly to PARAMETER SERVER LIMIT and the value labeled 'Parameter Server Limit:' in the PARAMETER SERVER display.
OBJECT-TYPE    
  INTEGER 1..8  

paramClientRetransmitInterval 1.3.6.1.4.1.33.7.10
The number of minutes between this system's attempts to store new parameters with a server that has not acknowledged previous attempts. Corresponds directly to PARAMETER SERVER RETRANSMIT TIMER and the value labeled 'Retransmit Timer: in the PARAMETER SERVER display.
OBJECT-TYPE    
  INTEGER 1..30  

paramClientRetransmitLimit 1.3.6.1.4.1.33.7.11
The maximum number of attempts by this system to store new parameters with a server that has not acknowledged previous attempts. Corresponds directly to PARAMETER SERVER RETRANSMIT LIMIT and the value labeled 'Retransmit Limit:' in the PARAMETER SERVER display.
OBJECT-TYPE    
  INTEGER 1..100  

paramClientState 1.3.6.1.4.1.33.7.12
This system's state with regard to update attempts. The value meanings are: other none of the following idle no update in progress internal internal state of no meaning to manager hold holding to keep from updating too often retry waiting to retry after failure Corresponds directly to the value labeled 'Storage State:' in the PARAMETER SERVER display.
OBJECT-TYPE    
  INTEGER other(1), idle(2), internal1(3), internal2(4), internal3(5), internal4(6), internal5(7), internal6(8), internal7(9), internal8(10), hold(11), retry(12)  

paramClientProtocolErrors 1.3.6.1.4.1.33.7.13
The number of invalid parameter service protocol messages received by this system. Corresponds directly to the value labeled 'Bad Parameter Messages:' in the PARAMETER SERVER display.
OBJECT-TYPE    
  Counter  

paramClientServerRejects 1.3.6.1.4.1.33.7.14
The number of parameter servers this system rejected due to exceeding paramClientServerLimit. Corresponds directly to the value labeled 'Rejected Servers:' in the PARAMETER SERVER display.
OBJECT-TYPE    
  Counter  

paramClientServerNumber 1.3.6.1.4.1.33.7.15
The number of parameter servers known to this system, indicating the number of entries in serverTable. Corresponds directly to the value labeled 'Parameter Servers:' in the PARAMETER SERVER display.
OBJECT-TYPE    
  INTEGER  

paramServerTable 1.3.6.1.4.1.33.7.16
A list of parameter server entries. The number of entries is given by the value of paramClientServerNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    ParamServerEntry

paramServerEntry 1.3.6.1.4.1.33.7.16.1
Status and parameter values for a parameter server.
OBJECT-TYPE    
  ParamServerEntry  

paramServerName 1.3.6.1.4.1.33.7.16.1.1
The server's name, unique within this system. Always 16 characters, null padded on the end. Corresponds directly to the name used to create the entry and the value labeled 'Name' in the PARAMETER SERVER display.
OBJECT-TYPE    
  DisplayString SIZE(16)  

paramServerEntryStatus 1.3.6.1.4.1.33.7.16.1.2
The status of the entry. Set to 'invalid' to remove the entry, which corresponds directly to the CLEAR/PURGE PARAMETER SERVER command. Actual removal of the entry is implementation specific.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

paramServerAddressType 1.3.6.1.4.1.33.7.16.1.3
The type of network address contained in paramServerAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'local' means there is no address and parameters were loaded from local storage. 'ip' is an Internet IP address. 'ethernet' is an 802.3 MAC address. Corresponds indirectly to the value labeled 'Address' in the PARAMETER SERVER display.
OBJECT-TYPE    
  AddressType  

paramServerAddress 1.3.6.1.4.1.33.7.16.1.4
The server's network address. Corresponds directly to the value labeled 'Address' in the PARAMETER SERVER display.
OBJECT-TYPE    
  OCTET STRING  

paramServerStoredVersion 1.3.6.1.4.1.33.7.16.1.5
Parameter version number currently stored at the server. Corresponds directly to the value labeled 'Version' in the PARAMETER SERVER display.
OBJECT-TYPE    
  INTEGER  

paramServerStoredTime 1.3.6.1.4.1.33.7.16.1.6
The server's date and time when it stored the parameters of version paramServerStoredVersion. Corresponds directly to the value labeled 'Date' in the PARAMETER SERVER display.
OBJECT-TYPE    
  DateTime  

paramServerStoredStatus 1.3.6.1.4.1.33.7.16.1.7
Status of this system's parameters with respect to the server. Corresponds directly to the value labeled 'Status' in the PARAMETER SERVER display. The value meanings are: ahead server version newer than system's behind server version older than system's current up to date failed system no longer attempting update failing system trying to update but failing query attempting to determine version noMemCard no memory card in card drive unknown version not known
OBJECT-TYPE    
  INTEGER unknown(1), current(2), ahead(3), behind(4), failing(5), failed(6), query(7), noMemCard(8)  

paramServerStoredFailure 1.3.6.1.4.1.33.7.16.1.8
When paramServerStoredStatus is 'failed' or 'failing', the reason for the most recent failure. Corresponds directly to the value labeled 'Reason' in the PARAMETER SERVER display. The value meanings are: other none of the following none no failure protocolOut invalid protocol message to server open file open error at server read file read error at server write file write error at server resource resource lack at server (e.g. disk) protocolIn invalid protocol message from server response no response from server close file close error at server delete file delete error at server rename file rename error at server fileData bad parameter data stored at server
OBJECT-TYPE    
  INTEGER other(1), none(2), protocolOut(3), open(4), read(5), write(6), resource(7), protocolIn(8), response(9), close(10), delete(11), rename(12), fileData(13)  

paramClientPath 1.3.6.1.4.1.33.7.17
The directory path to the parameter file on all servers. Corresponds directly to PARAMETER SERVER PATH and the value labeled 'Path:' in the PARAMETER SERVER display.
OBJECT-TYPE    
  DisplayString SIZE(0..40)  

paramClientChassisStorageState 1.3.6.1.4.1.33.7.18
The status of the current attempt to update parameters in local chassis storage. Corresponds directly to the value labeled 'Chassis Configuration:'.
OBJECT-TYPE    
  INTEGER notApplicable(1), unknown(2), current(3), verifying(4), busBusy(5), retrying(6), failing(7), behind(8)  

paramClientTftpBroadcast 1.3.6.1.4.1.33.7.20
Control over whether or not this system is allowed to send out a TFTP read broadcast after sending a BOOTP broadcast during the Parameter Check Function. 'enabled' allows TFTP broadcast. Corresponds directly to the presence of PARAMETER TFTP BROADCAST under the label 'Enabled Characteristics' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

paramClientWriteNow 1.3.6.1.4.1.33.7.21
Control to start saving parameters immediately in response to an execute. Corresponds directly to the WRITE PARAMETERS command. In response to a get-request or get-next-request, the agent always returns 'ready' for this value.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

agent 1.3.6.1.4.1.33.8
OBJECT IDENTIFIER    

terminalServer 1.3.6.1.4.1.33.8.1
OBJECT IDENTIFIER    

tsMxCard1M 1.3.6.1.4.1.33.8.1.1
OBJECT IDENTIFIER    

tsMxBox1M 1.3.6.1.4.1.33.8.1.2
OBJECT IDENTIFIER    

tsMxCard 1.3.6.1.4.1.33.8.1.3
OBJECT IDENTIFIER    

tsMxBox 1.3.6.1.4.1.33.8.1.4
OBJECT IDENTIFIER    

tsN9 1.3.6.1.4.1.33.8.1.5
OBJECT IDENTIFIER    

tsPrint 1.3.6.1.4.1.33.8.1.6
OBJECT IDENTIFIER    

tsX25 1.3.6.1.4.1.33.8.1.7
OBJECT IDENTIFIER    

em1608 1.3.6.1.4.1.33.8.1.29
OBJECT IDENTIFIER    

ir7520 1.3.6.1.4.1.33.8.1.30
OBJECT IDENTIFIER    

ir9020 1.3.6.1.4.1.33.8.1.31
OBJECT IDENTIFIER    

ir7020 1.3.6.1.4.1.33.8.1.32
OBJECT IDENTIFIER    

irMgr0Rdc 1.3.6.1.4.1.33.8.1.124
OBJECT IDENTIFIER    

ir9040 1.3.6.1.4.1.33.8.1.125
OBJECT IDENTIFIER    

ir7040 1.3.6.1.4.1.33.8.1.126
OBJECT IDENTIFIER    

irMgr0 1.3.6.1.4.1.33.8.1.127
OBJECT IDENTIFIER    

irM800 1.3.6.1.4.1.33.8.1.128
OBJECT IDENTIFIER    

irM700 1.3.6.1.4.1.33.8.1.129
OBJECT IDENTIFIER    

ir8020 1.3.6.1.4.1.33.8.1.130
OBJECT IDENTIFIER    

ir8040 1.3.6.1.4.1.33.8.1.131
OBJECT IDENTIFIER    

ir7004 1.3.6.1.4.1.33.8.1.132
OBJECT IDENTIFIER    

ir7008 1.3.6.1.4.1.33.8.1.133
OBJECT IDENTIFIER    

ir8004 1.3.6.1.4.1.33.8.1.134
OBJECT IDENTIFIER    

ir8008 1.3.6.1.4.1.33.8.1.135
OBJECT IDENTIFIER    

irM900 1.3.6.1.4.1.33.8.1.136
OBJECT IDENTIFIER    

irMGR0AC 1.3.6.1.4.1.33.8.1.137
OBJECT IDENTIFIER    

irMGR0AC-IN 1.3.6.1.4.1.33.8.1.138
OBJECT IDENTIFIER    

ir9004 1.3.6.1.4.1.33.8.1.139
OBJECT IDENTIFIER    

ir9008 1.3.6.1.4.1.33.8.1.140
OBJECT IDENTIFIER    

ir9504 1.3.6.1.4.1.33.8.1.141
OBJECT IDENTIFIER    

bridge 1.3.6.1.4.1.33.8.3
OBJECT IDENTIFIER    

repeater 1.3.6.1.4.1.33.8.4
OBJECT IDENTIFIER    

rpMx 1.3.6.1.4.1.33.8.4.1
OBJECT IDENTIFIER    

rpN9 1.3.6.1.4.1.33.8.4.2
OBJECT IDENTIFIER    

bridgeRouter 1.3.6.1.4.1.33.8.5
OBJECT IDENTIFIER    

bridgeRouterMx 1.3.6.1.4.1.33.8.5.1
OBJECT IDENTIFIER    

bridgeRouterN9 1.3.6.1.4.1.33.8.5.2
OBJECT IDENTIFIER    

bridgeRouterN3 1.3.6.1.4.1.33.8.5.3
OBJECT IDENTIFIER    

bridgeRouterN2 1.3.6.1.4.1.33.8.5.4
OBJECT IDENTIFIER    

bridgeRouterEB 1.3.6.1.4.1.33.8.5.5
OBJECT IDENTIFIER    

bridgeRouterRepeater 1.3.6.1.4.1.33.8.7
OBJECT IDENTIFIER    

switch 1.3.6.1.4.1.33.8.8
OBJECT IDENTIFIER    

oem 1.3.6.1.4.1.33.8.9
OBJECT IDENTIFIER    

netVantage 1.3.6.1.4.1.33.8.9.1
OBJECT IDENTIFIER    

nv8516TT 1.3.6.1.4.1.33.8.9.1.1
OBJECT IDENTIFIER    

nv8516FF 1.3.6.1.4.1.33.8.9.1.2
OBJECT IDENTIFIER    

nbase 1.3.6.1.4.1.33.8.10
OBJECT IDENTIFIER    

nbaseSwitch 1.3.6.1.4.1.33.8.10.1
OBJECT IDENTIFIER    

nbaseSwitchN9 1.3.6.1.4.1.33.8.10.1.1
OBJECT IDENTIFIER    

resourceFailure 1.3.6.1.4.1.33.9
Indication that a system resource lack occurred of the type resType.
TRAP-TYPE    
  resType  
  sysLocation  

xInternet 1.3.6.1.4.1.33.10
OBJECT IDENTIFIER    

xIp 1.3.6.1.4.1.33.10.1
OBJECT IDENTIFIER    

ipGatewayAddress1 1.3.6.1.4.1.33.10.1.1
The internet address of the system's primary (first choice) gateway. A value of 0.0.0.0 indicates no address. Corresponds directly to SERVER INTERNET PRIMARY GATEWAY ADDRESS and the value labeled 'Primary Gateway Address:' in the SERVER INTERNET CHARACTERISTICS display.
OBJECT-TYPE    
  IpAddress  

ipGatewayAddress2 1.3.6.1.4.1.33.10.1.2
The internet address of the system's secondary (second choice) gateway. A value of 0.0.0.0 indicates no address. Corresponds directly to SERVER INTERNET SECONDARY GATEWAY ADDRESS and the value labeled 'Secondary Gateway Address:' in the SERVER INTERNET CHARACTERISTICS display.
OBJECT-TYPE    
  IpAddress  

ipAutoSubnetMask 1.3.6.1.4.1.33.10.1.3
A control for automatic determination of subnet mask. 'disabled' indicates the system must use the mask as configured by the network manager. 'enabled' indicates that the system is to automatically change the subnet mask when the system's Internet address is changed. Corresponds directly to SERVER INTERNET SUBNET MASK AUTOCONFIGURE and the value labeled 'Subnet Mask Autoconfigure:' in the SERVER INTERNET CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

ipReassembly 1.3.6.1.4.1.33.10.1.4
A control for reassembly of IP fragments. Corresponds directly to SERVER INTERNET REASSEMBLY and the value labeled 'Reassembly:' in the SERVER INTERNET CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

ipFragmentsQueuedHigh 1.3.6.1.4.1.33.10.1.5
Highest number of IP fragments queued.
OBJECT-TYPE    
  Gauge  

ipFragmentsQueuedCurrent 1.3.6.1.4.1.33.10.1.6
Current number of IP fragments queued.
OBJECT-TYPE    
  Gauge  

ipGenAdExtTable 1.3.6.1.4.1.33.10.1.7
Table of additional fields indexed by local IP address. An entry in this table is created or deleted when an entry in the MIB-II ipAddrTable is created or deleted. Although MIB-II specifies the ipAddrTable as read-only, MRV In-Reach implementations typically implement it as read-write to support modification of local IP addresses, network masks, and such.
OBJECT-TYPE    
  SEQUENCE OF  
    IpGenAdExtEntry

ipGenAdExtEntry 1.3.6.1.4.1.33.10.1.7.1
A particular entry.
OBJECT-TYPE    
  IpGenAdExtEntry  

ipGenAdEntExtType 1.3.6.1.4.1.33.10.1.7.1.1
The way this local IP address is used, which may imply alternate, more intuitive ways to set it. primary general purpose for ordinary use rotary identificaton for rotary selection slip use for SLIP connection ppp use for PPP connection
OBJECT-TYPE    
  INTEGER primary(1), rotary(2), slip(3), ppp(4)  

ipGenAdEntExtBroadcast 1.3.6.1.4.1.33.10.1.7.1.2
Outgoing IP broadcast address associated with this local address. Value may be confined to logical compatibility with associated network mask.
OBJECT-TYPE    
  IpAddress  

ipARPTimeout 1.3.6.1.4.1.33.10.1.8
A control to set the length of time in minutes before an unused ARP entry is purged from the ARP table. The default is 60 minutes. Corresponds directly to the value labeled 'Translation Table TTL' in the SERVER INTERNET CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 1..255  

ipGatewayPingInterval 1.3.6.1.4.1.33.10.1.9
A control to set the interval of time in seconds between successive pings to the primary gateway so as to determine its status. The default is 60 seconds. Corresponds directly to the value labeled 'Gateway Timeout' in the SERVER INTERNET CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 1..300  

ipConfigureBootp 1.3.6.1.4.1.33.10.1.11
Control to use the BOOTP protocol upon startup to learn the unit's own internet address, subnet mask, primary and secondary gateway servers, domain name servers, time server and domain name.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

xTcp 1.3.6.1.4.1.33.10.2
OBJECT IDENTIFIER    

tcpPortTable 1.3.6.1.4.1.33.10.2.1
A list of TCP character port entries.
OBJECT-TYPE    
  SEQUENCE OF  
    TcpPortEntry

tcpPortEntry 1.3.6.1.4.1.33.10.2.1.1
TCP parameter values for a character port.
OBJECT-TYPE    
  TcpPortEntry  

tcpPortIndex 1.3.6.1.4.1.33.10.2.1.1.1
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.
OBJECT-TYPE    
  INTEGER  

tcpPortConnectByAddress 1.3.6.1.4.1.33.10.2.1.1.2
A control for requesting outgoing connection by internet address. 'disabled' indicates outgoing connections must be by Domain name. 'enabled' indicates that outgoing connections may be requested by internet address. Corresponds directly to PORT INTERNET CONNECTIONS and the presence of the label 'Internet Connections' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

tcpPortWindowSize 1.3.6.1.4.1.33.10.2.1.1.3
Size of the TCP window for TCP connections on the port. Corresponds directly to PORT INTERNET TCP WINDOW SIZE and the value labeled 'TCP Window Size:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 64..8192  

tcpPortKeepAliveLimit 1.3.6.1.4.1.33.10.2.1.1.4
Number of minutes to maintain a TCP connection without response to keep-alive communication. A value of zero indicates no limit.
OBJECT-TYPE    
  INTEGER 0..30  

tcpResequencing 1.3.6.1.4.1.33.10.2.2
A control for keeping TCP messages received out-of-order to resequence them before using them. Corresponds directly to SERVER INTERNET TCP RESEQUENCING and the value labeled 'Resequencing:' in the SERVER INTERNET CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

tcpQueuedSegs 1.3.6.1.4.1.33.10.2.3
Number of TCP segments in the TCP receive queues. Corresponds directly to the value labeled 'TCP Packets Queued:' in the SERVER INTERNET COUNTERS display.
OBJECT-TYPE    
  Gauge  

tcpDiscardSegs 1.3.6.1.4.1.33.10.2.4
Number of TCP segments discarded due to exceeding the TCP receive queue limit. Corresponds directly to the value labeled 'TCP Packets Discarded:' in the SERVER INTERNET COUNTERS display.
OBJECT-TYPE    
  Counter  

tcpConnectTimer 1.3.6.1.4.1.33.10.2.5
Number of seconds to attempt a TCP connection without a response from the other side. The default value is 32 seconds. Corresponds directly to the SERVER INTERNET TCP CONNECT TIMER and the value labeled 'TCP Connect Timer' in the SERVER INTERNET CHARACTERISTICS display
OBJECT-TYPE    
  INTEGER 4..32  

tcpLocalPortBase 1.3.6.1.4.1.33.10.2.6
The value for port 0's tcp source port number.
OBJECT-TYPE    
  INTEGER 1..32767  

tcpLocalPortIncrement 1.3.6.1.4.1.33.10.2.7
The value by which the tcp source port number increases for each port greater than port 0.
OBJECT-TYPE    
  INTEGER 1..1024  

tcpRoutingTblSz 1.3.6.1.4.1.33.10.2.8
A control to set the size of the working routing table. The default is the current size of the table (64).
OBJECT-TYPE    
  INTEGER 64..512  

tcpDataSendDelay 1.3.6.1.4.1.33.10.2.9
A control to delay for the specified number of 10 millisecond ticks before sending the userdata string over the telnet connection.
OBJECT-TYPE    
  INTEGER 0..3000  

tcpAckDelay 1.3.6.1.4.1.33.10.2.10
A Control to prevent sending a TCP ACK when we we change TCP window size.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

tcpRetransmitMin 1.3.6.1.4.1.33.10.2.11
Number of milliseconds for the initial TCP Retransmit timer. This is the time at which a TCP session will initially retransmit unacknowledged packets.
OBJECT-TYPE    
  INTEGER 600..3000  

xSnmpAgent 1.3.6.1.4.1.33.10.3
OBJECT IDENTIFIER    

snmpAgentGetCommunity 1.3.6.1.4.1.33.10.3.1
The SNMP community name allowed to perform get-requests or get-next requests to this agent. Use of this value is case-insensitive. If the size is 0, the agent does not check the community name for these operations. Corresponds directly to SERVER INTERNET SNMP GET COMMUNITY and the value labeled 'Get Community:' in the SERVER INTERNET SNMP CHARACTERISTICS display.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

snmpAgentSetCommunity 1.3.6.1.4.1.33.10.3.2
The SNMP community name allowed to perform set-requests to this agent. Use of this value is case-insensitive. If the size is 0, the agent does not check the community name for these operations. Corresponds directly to SERVER INTERNET SNMP SET COMMUNITY and the value labeled 'Set Community:' in the SERVER INTERNET SNMP CHARACTERISTICS display.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

snmpAgentTrapCommunity 1.3.6.1.4.1.33.10.3.3
The SNMP community name sent in traps from this agent. Use of this value preserves case. Corresponds directly to SERVER INTERNET SNMP TRAP COMMUNITY and the value labeled 'Trap Community:' in the SERVER INTERNET SNMP CHARACTERISTICS display.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

snmpAgentGetClientNumber 1.3.6.1.4.1.33.10.3.4
The number of client source addresses allowed to perform get-requests or get-next requests to this agent. If the value is 0, the agent does not check source address for these operations. Corresponds indirectly to the values labeled 'Get Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER  

snmpAgentSetClientNumber 1.3.6.1.4.1.33.10.3.5
The number of client source addresses allowed to perform set-requests to this agent. If the value is 0, the agent does not check source address for these operations. Corresponds indirectly to the values labeled 'Set Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER  

snmpAgentTrapClientNumber 1.3.6.1.4.1.33.10.3.6
The number of client source addresses to which this agent sends traps. If the value is 0, the agent does not perform this operation. Corresponds indirectly to the values labeled 'Trap Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER  

getClientTable 1.3.6.1.4.1.33.10.3.7
A list of get client entries. The number of entries is given by the value of snmpAgentGetClientNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    GetClientEntry

getClientEntry 1.3.6.1.4.1.33.10.3.7.1
Parameter values for a get client.
OBJECT-TYPE    
  GetClientEntry  

getClientIndex 1.3.6.1.4.1.33.10.3.7.1.1
Identification of a get client entry. Corresponds directly to the number in the label 'Get Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER  

getClientEntryStatus 1.3.6.1.4.1.33.10.3.7.1.2
Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

getClientAddressType 1.3.6.1.4.1.33.10.3.7.1.3
The type of network address contained in getClientAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'ip' is an Internet IP address. 'ethernet' is an 802.3 MAC address. If getClientAddressType does not accompany getClientAddress in a set request, the default type is 'ip'. Corresponds indirectly to the address value labeled 'Get Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.
OBJECT-TYPE    
  AddressType  

getClientAddress 1.3.6.1.4.1.33.10.3.7.1.4
The client's network address. If getClientAddressType does not accompany getClientAddress in a set request, the default type is 'ip'. Corresponds directly to the address value labeled 'Get Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.
OBJECT-TYPE    
  OCTET STRING  

setClientTable 1.3.6.1.4.1.33.10.3.8
A list of set client entries. The number of entries is given by the value of snmpAgentSetClientNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    SetClientEntry

setClientEntry 1.3.6.1.4.1.33.10.3.8.1
Parameter values for a set client.
OBJECT-TYPE    
  SetClientEntry  

setClientIndex 1.3.6.1.4.1.33.10.3.8.1.1
Identification of a set client entry. Corresponds directly to the number in the label 'Set Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER  

setClientEntryStatus 1.3.6.1.4.1.33.10.3.8.1.2
Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

setClientAddressType 1.3.6.1.4.1.33.10.3.8.1.3
The type of network address contained in setClientAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'ip' is an Internet IP address. 'ethernet' is an 802.3 MAC address. If setClientAddressType does not accompany setClientAddress in a set request, the default type is 'ip'. Corresponds indirectly to the address value labeled 'Set Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.
OBJECT-TYPE    
  AddressType  

setClientAddress 1.3.6.1.4.1.33.10.3.8.1.4
The client's network address. When setting this value, the requester must supply setClientAddressType. If setClientAddressType does not accompany setClientAddress in a set request, the default type is 'ip'. Corresponds directly to the address value labeled 'Set Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.
OBJECT-TYPE    
  OCTET STRING  

trapClientTable 1.3.6.1.4.1.33.10.3.9
A list of trap client entries. The number of entries is given by the value of snmpAgentTrapClientNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    TrapClientEntry

trapClientEntry 1.3.6.1.4.1.33.10.3.9.1
Parameter values for a trap client.
OBJECT-TYPE    
  TrapClientEntry  

trapClientIndex 1.3.6.1.4.1.33.10.3.9.1.1
Identification of a trap client entry. Corresponds directly to the number in the label 'Trap Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER  

trapClientEntryStatus 1.3.6.1.4.1.33.10.3.9.1.2
Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

trapClientAddressType 1.3.6.1.4.1.33.10.3.9.1.3
The type of network address contained in trapClientAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'ip' is an Internet IP address. 'ethernet' is an 802.3 MAC address. If trapClientAddressType does not accompany trapClientAddress in a set request, the default type is 'ip'. Corresponds indirectly to the address value labeled 'Trap Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.
OBJECT-TYPE    
  AddressType  

trapClientAddress 1.3.6.1.4.1.33.10.3.9.1.4
The client's network address. When setting this value, the requester must supply trapClientAddressType. If trapClientAddressType does not accompany trapClientAddress in a set request, the default type is 'ip'. Corresponds directly to the address value labeled 'Trap Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.
OBJECT-TYPE    
  OCTET STRING  

snmpAgentAuthFailureAddress 1.3.6.1.4.1.33.10.3.10
The address of the client to most recently fail SNMP authorization.
OBJECT-TYPE    
  TypedAddress  

snmpAgentCommunityAuthenticationAlways 1.3.6.1.4.1.33.10.3.14
When enabled, indicates that community string authentication is done always for Gets, Sets, and GetNexts. When disabled, community string authentication is done once; but bypassed on subsequent Gets, Sets or GetNexts from the same address.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

snmpAgentTrapClientPingHost1 1.3.6.1.4.1.33.10.3.15
Configures the first trap client in the trapClientTable as a ping host. The InReach server will poll the ping host at a specified interval to determine connectivity. This feature is mutually exclusive with snmpAgentTrapClientQuerySourceHost1 and snmpAgentTrapClientQuerySourceHost2.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

snmpAgentTrapClientPingHost2 1.3.6.1.4.1.33.10.3.16
Configures the second trap client in the trapClientTable as a ping host. The InReach server will poll the ping host at a specified interval to determine connectivity. This feature is mutually exclusive with snmpAgentTrapClientQuerySourceHost1 and snmpAgentTrapClientQuerySourceHost2.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

snmpAgentTrapClientPingHost1PollInterval 1.3.6.1.4.1.33.10.3.17
Indicates the time in seconds between polling the first ping host.
OBJECT-TYPE    
  INTEGER 1..65535  

snmpAgentTrapClientPingHost2PollInterval 1.3.6.1.4.1.33.10.3.18
Indicates the time in seconds between polling the second ping host.
OBJECT-TYPE    
  INTEGER 1..65535  

snmpAgentTrapClientPingHost1PollRetries 1.3.6.1.4.1.33.10.3.19
Indicates the maximum number of retries when polling the first ping host before concluding that connectivity is lost. When network connectivity is lost, PPP dial backup procedures to a backup host are initiated.
OBJECT-TYPE    
  INTEGER 1..255  

snmpAgentTrapClientPingHost2PollRetries 1.3.6.1.4.1.33.10.3.20
Indicates the maximum number of retries when polling the second ping host before concluding that connectivity is lost. When network connectivity is lost, PPP dial backup procedures to a backup host are initiated.
OBJECT-TYPE    
  INTEGER 1..255  

snmpAgentTrapClientQuerySourceHost1 1.3.6.1.4.1.33.10.3.21
Configures the first trap client in the trapClientTable as a query source host. When enabled the InReach server will monitor incoming get-, get-next- and set-requests from this host as an indicator of connectivity. This feature is mutually exclusive with snmpAgentTrapClientPingHost1 and snmpAgentTrapClientPingHost2.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

snmpAgentTrapClientQuerySourceHost2 1.3.6.1.4.1.33.10.3.22
Configures the second trap client in the trapClientTable as a query source host. When enabled the InReach server will monitor incoming get-, get-next- and set-requests from this host as an indicator of connectivity. This feature is mutually exclusive with snmpAgentTrapClientPingHost1 and snmpAgentTrapClientPingHost2.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

snmpAgentTrapClientQuerySourceHost1Timeout 1.3.6.1.4.1.33.10.3.23
Indicates the time in seconds between SNMP queries from the first query source host before timing out and considering connectivity lost to that host. When network connectivity is lost, PPP dial backup procedures to a backup host are initiated.
OBJECT-TYPE    
  INTEGER 1..65535  

snmpAgentTrapClientQuerySourceHost2Timeout 1.3.6.1.4.1.33.10.3.24
Indicates the time in seconds between SNMP queries from the first query source host before timing out and considering connectivity lost to that host. When network connectivity is lost, PPP dial backup procedures to a backup host are initiated.
OBJECT-TYPE    
  INTEGER 1..65535  

xDomainResolver 1.3.6.1.4.1.33.10.4
OBJECT IDENTIFIER    

domainResolverSuffix 1.3.6.1.4.1.33.10.4.1
A partial domain name for the server to append to the end of an incomplete domain name provided by the user. Corresponds directly to SERVER INTERNET DEFAULT DOMAIN SUFFIX and the value labeled 'Domain Suffix:' in the SERVER INTERNET CHARACTERISTICS display.
OBJECT-TYPE    
  DisplayString SIZE(0..115)  

domainResolverAddress1 1.3.6.1.4.1.33.10.4.2
The internet address of a Domain Name Server. The system can use one or two such addresses, without preference. A value of 0.0.0.0 indicates no address. Corresponds directly to SERVER INTERNET PRIMARY DOMAIN ADDRESS and the value labeled 'Primary Domain Address:' in the SERVER INTERNET CHARACTERISTICS display.
OBJECT-TYPE    
  IpAddress  

domainResolverAddress2 1.3.6.1.4.1.33.10.4.3
The internet address of a Domain Name Server. The system can use one or two such addresses, without preference. A value of 0.0.0.0 indicates no address. Corresponds directly to SERVER INTERNET SECONDARY DOMAIN ADDRESS and the value labeled 'Secondary Domain Address:' in the SERVER INTERNET CHARACTERISTICS display.
OBJECT-TYPE    
  IpAddress  

domainResolverTtl 1.3.6.1.4.1.33.10.4.4
The number of hours to keep received Domain information. Corresponds directly to SERVER INTERNET DOMAIN TTL and the value labeled ' Domain TTL:' in the SERVER INTERNET CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..168  

domainResolverNameNumber 1.3.6.1.4.1.33.10.4.5
The number of Domain name mappings in this system's name cache.
OBJECT-TYPE    
  INTEGER  

nameTable 1.3.6.1.4.1.33.10.4.6
A list of Domain name entries. The number of entries is given by the value of domainResolverNameNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    NameEntry

nameEntry 1.3.6.1.4.1.33.10.4.6.1
Parameter values for a Domain name.
OBJECT-TYPE    
  NameEntry  

nameName 1.3.6.1.4.1.33.10.4.6.1.1
A fully qualified domain name. Corresponds directly to the value labeled 'Domain Name' in the DOMAIN display.
OBJECT-TYPE    
  DisplayString SIZE(1..50)  

nameAddress 1.3.6.1.4.1.33.10.4.6.1.2
An Internet address corresponding to the Domain name. Corresponds directly to the value labeled 'Internet Address' in the DOMAIN display.
OBJECT-TYPE    
  IpAddress  

nameStatus 1.3.6.1.4.1.33.10.4.6.1.3
The status of the entry. Set to 'invalid' to remove the entry, which corresponds directly to the PURGE DOMAIN command. Actual removal of the entry is implementation specific.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

nameSource 1.3.6.1.4.1.33.10.4.6.1.4
Source of this entry. The value meanings are: local defined by manager (LOCAL) primary obtained from a primary name server secondary obtained from a secondary name server rwho obtained from rwho Corresponds directly to the value labeled 'Source' in the DOMAIN display.
OBJECT-TYPE    
  INTEGER manager(1), primary(2), secondary(3), rwho(4)  

nameTtl 1.3.6.1.4.1.33.10.4.6.1.5
The number of minutes remaining in the entry's time to live. Corresponds directly to the value labeled 'TTL' in the DOMAIN display.
OBJECT-TYPE    
  INTEGER  

domainResolverPpp 1.3.6.1.4.1.33.10.4.7
OBJECT IDENTIFIER    

domainResolverPppPrimaryServer 1.3.6.1.4.1.33.10.4.7.1
The internet address of the primary Domain Name Server to use in PPP IPCP negotiations. A value of 0.0.0.0 indicates no address. Corresponds directly to the value labeled 'Primary WINS Address:' in the SERVER INTERNET CHARACTERISTICS display.
OBJECT-TYPE    
  IpAddress  

domainResolverPppSecondaryServer 1.3.6.1.4.1.33.10.4.7.2
The internet address of the secondary Domain Name Server to use in PPP IPCP negotiations. A value of 0.0.0.0 indicates no address. Corresponds directly to the value labeled 'Secondary WINS Address:' in the SERVER INTERNET CHARACTERISTICS display.
OBJECT-TYPE    
  IpAddress  

xSlip 1.3.6.1.4.1.33.10.5
OBJECT IDENTIFIER    

slipTable 1.3.6.1.4.1.33.10.5.1
A list of SLIP character port entries.
OBJECT-TYPE    
  SEQUENCE OF  
    SlipEntry

slipEntry 1.3.6.1.4.1.33.10.5.1.1
Parameter values for a SLIP port.
OBJECT-TYPE    
  SlipEntry  

slipIndex 1.3.6.1.4.1.33.10.5.1.1.1
An index value that uniquely identifies a port that can run SLIP. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.
OBJECT-TYPE    
  INTEGER  

slipState 1.3.6.1.4.1.33.10.5.1.1.2
A control indicating whether SLIP is in operation on the port. Corresponds directly to PORT INTERNET SLIP and the value labeled 'SLIP' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER off(1), on(2), compressed(3)  

slipLocalAddress 1.3.6.1.4.1.33.10.5.1.1.3
The IP address assigned to the port. Corresponds directly to PORT SLIP ADDRESS and the value labeled 'SLIP Address:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  IpAddress  

slipRemoteAddress 1.3.6.1.4.1.33.10.5.1.1.4
The IP address of the remote system attached to the port. Corresponds directly to PORT SLIP REMOTE and the value labeled 'Remote SLIP Address:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  IpAddress  

slipMask 1.3.6.1.4.1.33.10.5.1.1.5
The subnet mask to use for SLIP operation on the port. Corresponds directly to PORT SLIP MASK and the value labeled 'SLIP Mask:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  IpAddress  

slipPortPacketsReceived 1.3.6.1.4.1.33.10.5.1.1.6
The number of SLIP packets received from the port. Corresponds directly to the value labeled 'Serial Packets Received:' in the PORT COUNTERS display.
OBJECT-TYPE    
  Counter  

slipPortPacketsSent 1.3.6.1.4.1.33.10.5.1.1.7
The number of SLIP packets sent to the port. Corresponds directly to the value labeled 'Serial Packets Sent:' in the PORT COUNTERS display.
OBJECT-TYPE    
  Counter  

slipPortPacketsDiscarded 1.3.6.1.4.1.33.10.5.1.1.8
The number of SLIP packets received from the port and discarded. Corresponds directly to the value labeled 'Serial Packets Discarded:' in the PORT COUNTERS display.
OBJECT-TYPE    
  Counter  

slipPortPacketLengthErrors 1.3.6.1.4.1.33.10.5.1.1.9
The number of SLIP packets received from the port with an incorrect number of bytes. Corresponds directly to the value labeled 'Serial Packet Length Errors:' in the PORT COUNTERS display.
OBJECT-TYPE    
  Counter  

slipPortPacketChecksumErrors 1.3.6.1.4.1.33.10.5.1.1.10
The number of SLIP packets received from the port with an invalid checksum. Corresponds directly to the value labeled 'Serial Packet Checksum Errors:' in the PORT COUNTERS display.
OBJECT-TYPE    
  Counter  

slipNetworkPacketsReceived 1.3.6.1.4.1.33.10.5.1.1.11
The number of SLIP packets received from the network for this port. Corresponds directly to the value labeled 'Network Packets Received:' in the PORT COUNTERS display.
OBJECT-TYPE    
  Counter  

slipNetworkPacketsSent 1.3.6.1.4.1.33.10.5.1.1.12
The number of SLIP packets sent to the network from this port. Corresponds directly to the value labeled 'Network Packets Sent:' in the PORT COUNTERS display.
OBJECT-TYPE    
  Counter  

slipNetworkPacketsDiscarded 1.3.6.1.4.1.33.10.5.1.1.13
The number of SLIP packets received from the network for this port and discarded. Corresponds directly to the value labeled 'Network Packets Discarded:' in the PORT COUNTERS display.
OBJECT-TYPE    
  Counter  

xTelnet 1.3.6.1.4.1.33.10.6
OBJECT IDENTIFIER    

telnetPortTable 1.3.6.1.4.1.33.10.6.1
A list of Telnet character port entries.
OBJECT-TYPE    
  SEQUENCE OF  
    TelnetPortEntry

telnetPortEntry 1.3.6.1.4.1.33.10.6.1.1
Telnet parameter values for a character port.
OBJECT-TYPE    
  TelnetPortEntry  

telnetPortIndex 1.3.6.1.4.1.33.10.6.1.1.1
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.
OBJECT-TYPE    
  INTEGER  

telnetPortIncomingTcpPort 1.3.6.1.4.1.33.10.6.1.1.2
The TCP port number offered for incoming connections to this character port. Corresponds directly to PORT TELNET REMOTE PORT and the value labeled 'Remote Port:' in the PORT TELNET CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 1..32767  

telnetPortOutgoingTcpPort 1.3.6.1.4.1.33.10.6.1.1.3
The TCP port number used by default for outgoing connections from this character port. Corresponds directly to PORT TELNET DEFAULT PORT and the value labeled 'Default Port:' in the PORT TELNET CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER  

telnetPortNewlineTranslation 1.3.6.1.4.1.33.10.6.1.1.4
Translation to apply to newline sequences (CR/NULL or CR/LF) received from the network, before sending the newline to the character port. The value indicates the sequence sent to the character port, with 'none' meaning no translation. The lfToCrLf value converts the newline character LF received from the network to a CR/LF. Corresponds directly to PORT TELNET NEWLINE FILTERING and the value labeled 'Newline Filtering:' in the PORT TELNET CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER none(1), cr(2), crNull(3), crLf(4), std(5), lfToCrLf(6)  

telnetPortTerminalType 1.3.6.1.4.1.33.10.6.1.1.5
The terminal type character string for Telnet negotiations. Corresponds directly to PORT TELNET TERMINALTYPE and the value labeled 'TerminalType:' in the PORT TELNET CHARACTERISTICS display.
OBJECT-TYPE    
  DisplayString SIZE(0..21)  

telnetPortEorReflection 1.3.6.1.4.1.33.10.6.1.1.6
Control for end-of-record handshake. Corresponds directly to PORT TELNET EOR REFLECTION and the value labeled 'EOR Reflection:' in the PORT TELNET CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

telnetPortBinaryMode 1.3.6.1.4.1.33.10.6.1.1.7
Control for operation of Telnet binary mode. The value meanings are: disabled refuse binary mode negotiation (INTERACTIVE) flowControl pass all but XON and XOFF (PASTHRU) complete pass all characters (PASSALL) Corresponds directly to PORT TELNET BINARY SESSION MODE and the value labeled 'Binary Session Mode:' in the PORT TELNET CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER flowControl(1), complete(2), disabled(3)  

telnetPortSendLocation 1.3.6.1.4.1.33.10.6.1.1.8
A control indicating whether a Telnet session will initiate negotiation of the Send Location option. Corresponds directly to the PORT TELNET LOCATION and the value labeled 'Location' in the PORT TELNET CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

telnetPortClientLocation 1.3.6.1.4.1.33.10.6.1.1.9
The location of the Telnet client port. Corresponds directly to the value labeled 'Telnet Client Location' in the SESSION display.
OBJECT-TYPE    
  DisplayString SIZE(0..50)  

telnetPortPassiveSendLocation 1.3.6.1.4.1.33.10.6.1.1.10
A control indicating whether a Telnet session will passively respond to negotiation of the Send Location option. When disabled and telnetPortSendLocation is disabled, we will refuse to negotiate this option. When telnetPortSendLocation is enabled, it takes precedence. Corresponds directly to the value labeled 'Passive Location' in the PORT TELNET CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

telnetSerialPortTable 1.3.6.1.4.1.33.10.6.2
A list of Telnet character port entries.
OBJECT-TYPE    
  SEQUENCE OF  
    TelnetSerialPortEntry

telnetSerialPortEntry 1.3.6.1.4.1.33.10.6.2.1
Telnet parameter values for a character port.
OBJECT-TYPE    
  TelnetSerialPortEntry  

telnetSerialPortIndex 1.3.6.1.4.1.33.10.6.2.1.1
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.
OBJECT-TYPE    
  INTEGER  

telnetSerialPortOptionDisplay 1.3.6.1.4.1.33.10.6.2.1.2
Control for display of Telnet option negotiations. Corresponds directly to PORT TELNET OPTION DISPLAY and the value labeled 'Option Display:' in the PORT TELNET CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

telnetSerialPortCsiEscape 1.3.6.1.4.1.33.10.6.2.1.3
Control for translation of 8-bit escape sequences received from the character port to 7-bit equivalents before transmission to the remote partner. Corresponds directly to PORT TELNET CSI ESCAPE and the value labeled 'CSI Escape:' in the PORT TELNET CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

telnetSerialPortEchoMode 1.3.6.1.4.1.33.10.6.2.1.4
Control for who echoes characters that come from the character port. The value meanings are: local terminal server echoes locally remote remote system echoes disabled don't default to local echo passive don't initiate negotiating of echo character initiate remote echo and suppress go ahead line reject remote echo and reject suppress go ahead noecho will not initiate echo, but will negotiate it Corresponds directly to PORT TELNET ECHO MODE and the value labeled 'Echo Mode:' in the PORT TELNET CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER local(1), remote(2), disabled(3), passive(4), character(5), line(6), noecho(7)  

telnetSerialPortNewlineMode 1.3.6.1.4.1.33.10.6.2.1.5
Translation to apply to newline (carriage return) received from the character port, before sending the newline to the remote partner. The correspondence to command keywords is 'crNull' to NULL, 'crLF' to LINEFEED, and 'verbatim' to NOTHING (that is, no translation). Corresponds directly to PORT TELNET NEWLINE and the value labeled 'Newline:' in the PORT TELNET CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER crNull(1), crLf(2), verbatim(3)  

telnetSerialPortTransmitMode 1.3.6.1.4.1.33.10.6.2.1.6
Criterion for deciding to send to the remote partner characters received from the character port. Corresponds directly to PORT TELNET TRANSMIT and the value labeled 'Transmit:' in the PORT TELNET CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER immediate(1), buffered(2), timed(3), controlchar(4)  

telnetSerialPortTransmitCharacterTimes 1.3.6.1.4.1.33.10.6.2.1.7
Number of character times to wait before transmitting when telnetSerialPortTransmitMode value is 'timed'. Corresponds directly to PORT TELNET TRANSMIT IDLETIME and the value labeled 'Transmit: Idle Time -' in the PORT TELNET CHARACTERISTICS display. This object may only be set to values 1..255. A value of 0 may be read if telnetSerialPortTransmitMode has a value of immediate or buffered
OBJECT-TYPE    
  INTEGER 0..255  

telnetSerialPortAbortOutputCharacter 1.3.6.1.4.1.33.10.6.2.1.8
Character input from the character port to cause aborting output. The value 0 indicates no character has this effect. Corresponds directly to PORT TELNET ABORT OUTPUT and the value labeled 'Abort Output Character:' in the PORT TELNET CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

telnetSerialPortAttentionCharacter 1.3.6.1.4.1.33.10.6.2.1.9
Character input from the character port to cause an attention notification to the remote partner. The value 0 indicates no character has this effect. Corresponds directly to PORT TELNET ATTENTION and the value labeled 'Attention Character:' in the PORT TELNET CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

telnetSerialPortEraseKeyCharacter 1.3.6.1.4.1.33.10.6.2.1.10
Character input from the character port to cause erasure of the previous input character. The value 0 indicates no character has this effect. Corresponds directly to PORT TELNET ERASE CHARACTER and the value labeled 'Erase Keystroke Character:' in the PORT TELNET CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

telnetSerialPortEraseLineCharacter 1.3.6.1.4.1.33.10.6.2.1.11
Character input from the character port to cause erasure of the previous line of input. The value 0 indicates no character has this effect. Corresponds directly to PORT TELNET ERASE LINE and the value labeled 'Erase Line Character:' in the PORT TELNET CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

telnetSerialPortInterruptCharacter 1.3.6.1.4.1.33.10.6.2.1.12
Character input from the character port to cause sending an interrupt notification to the remote partner. The value 0 indicates no character has this effect. Corresponds directly to PORT TELNET INTERRUPT and the value labeled 'Interrupt Character:' in the PORT TELNET CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

telnetSerialPortQueryCharacter 1.3.6.1.4.1.33.10.6.2.1.13
Character input from the character port to cause sending a status query to the remote partner. The value 0 indicates no character has this effect. Corresponds directly to PORT TELNET QUERY and the value labeled 'Query Character:' in the PORT TELNET CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

telnetSerialPortSynchronizeCharacter 1.3.6.1.4.1.33.10.6.2.1.14
Character input from the character port to cause sending a synchronization attempt to the remote partner. The value 0 indicates no character has this effect. Corresponds directly to PORT TELNET SYNCHRONIZE and the value labeled 'Synchronize Character:' in the PORT TELNET CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

telnetSerialPortUrgentBreak 1.3.6.1.4.1.33.10.6.2.1.15
Control for encoding breaks as Telnet urgent data. Corresponds directly to PORT TELNET URGENT BREAK and the value labeled 'Urgent Break:' in the PORT TELNET CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

telnetSerialPortRs491 1.3.6.1.4.1.33.10.6.2.1.16
A control to enable RS491 protocol processing on a port.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

telnetSerialPortTransmitBufferedTime 1.3.6.1.4.1.33.10.6.2.1.17
Number of milliseconds to wait before transmitting when telnetSerialPortTransmitMode value is 'timed'. Corresponds directly to PORT TELNET TRANSMIT BUFFERED and the value labeled 'Transmit: Buff Time -' in the PORT TELNET CHARACTERISTICS display. This object may only be set to values 30..1500. A value of 0 may be read if telnetSerialPortTransmitMode has a value of immediate, idletime or controlchar
OBJECT-TYPE    
  INTEGER 30..1500  

telnetSerialPortInterpretInterruptAsBreak 1.3.6.1.4.1.33.10.6.2.1.18
Control to interpret a Telnet Interrupt Character coming from the network as a Telnet Break Character, and to send a break out the serial port. This control is necessary for those devices which can send Telnet Interrupt but not Telnet Break. Corresponds directly to the presence of 'Telnet Interrupts Interpreted as Break' under the label 'Enabled Characteristics' in the PORT TELNET CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

telnetSerialPortPass8d 1.3.6.1.4.1.33.10.6.2.1.19
Control to pass unaltered the hexadecimal character '8D'. This control is added to ensure that this character will pass through directly in a session with 8-bit characters and parity odd or even. Corresponds directly to the presence of 'Telnet Pass 8D' under the label 'Enabled Characteristics' in the PORT TELNET CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

telnetSerialPortComControlClient 1.3.6.1.4.1.33.10.6.2.1.20
Control to begin Telnet comport control option negotiations as a client when a Telnet session is initiated. The comport control option enables a port to do outbound modem dialing on a Telnet connection. Corresponds to the value labeled 'Client:' in the PORT TELNET COMPORTCONTROL CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

telnetSerialPortComControlServer 1.3.6.1.4.1.33.10.6.2.1.21
Control to begin Telnet comport control option negotiations as a server when a Telnet session is initiated. Corresponds to the value labeled 'Server:' in the PORT TELNET COMPORTCONTROL CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

telnetSerialPortComControlServerRaisesDtr 1.3.6.1.4.1.33.10.6.2.1.22
Control for the client to request that the server raises its DTR signal on the port at the begining of the Telnet connection. Corresponds to the value labeled 'Server Raises DTR:' in the PORT TELNET COMPORTCONTROL CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

telnetSerialPortComControlClientTogglesDtr 1.3.6.1.4.1.33.10.6.2.1.23
Control to respond to the server's notification that its DCD has come high (or low) by raising (or lowering) DTR accordingly on the local port. Corresponds to the value labeled 'Client Toggles DTR:' in the PORT TELNET COMPORTCONTROL CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

xTn3270 1.3.6.1.4.1.33.10.7
OBJECT IDENTIFIER    

tn3270DeviceNumber 1.3.6.1.4.1.33.10.7.1
The number of entries in the tn3270 Device table.
OBJECT-TYPE    
  INTEGER  

tn3270LanguageNumber 1.3.6.1.4.1.33.10.7.2
The number of entries in the tn3270 Language table.
OBJECT-TYPE    
  INTEGER  

tn3270PortKeymapStatus 1.3.6.1.4.1.33.10.7.3
Control for individual ports to create their own keymaps. Corresponds directly to SERVER TN3270 PORT KEYMAPS and the value labeled 'Port Keymaps:' in the SERVER TN3270 display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

tn3270DeviceTable 1.3.6.1.4.1.33.10.7.4
A list of tn3270 terminal device entries.
OBJECT-TYPE    
  SEQUENCE OF  
    Tn3270DeviceEntry

tn3270DeviceEntry 1.3.6.1.4.1.33.10.7.4.1
Tn3270 parameter values for a terminal device entry.
OBJECT-TYPE    
  Tn3270DeviceEntry  

tn3270DeviceName 1.3.6.1.4.1.33.10.7.4.1.1
The name of a generic terminal device. Corresponds directly to SERVER TN3270 DEVICE and the value labeled 'Device Name:' in the SERVER TN3270 DEVICE display.
OBJECT-TYPE    
  DisplayString SIZE(1..8)  

tn3270DeviceStatus 1.3.6.1.4.1.33.10.7.4.1.2
Status of this entry. Setting the value to 'invalid' invalidates the entry, corresponding directly to the PURGE SERVER TN3270 DEVICE command. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. If a new device table entry is added to the table, the agent will copy the VT100 table as a default. If one plans to add a new table entry, one should not remove the VT100 entry.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

tn3270DeviceType 1.3.6.1.4.1.33.10.7.4.1.3
The terminal type character string for use when tn3270DeviceTn3270Type is insufficient. Corresponds directly to SERVER TN3270 DEVICE TERMINALTYPE and the value labeled 'TerminalType:' in the SERVER TN3270 DEVICE display.
OBJECT-TYPE    
  DisplayString SIZE(0..21)  

tn3270Device3278Model 1.3.6.1.4.1.33.10.7.4.1.4
The 3278 model for the device. Corresponds directly to SERVER TN3270 DEVICE 3278Model and the value labeled '3278Model:' in the SERVER TN3270 DEVICE display.
OBJECT-TYPE    
  INTEGER model2(1), model5(2)  

tn3270DeviceKeyNumber 1.3.6.1.4.1.33.10.7.4.1.5
The number of Key table entries for this device.
OBJECT-TYPE    
  INTEGER  

tn3270DeviceScreenNumber 1.3.6.1.4.1.33.10.7.4.1.6
The number of Screen table entries for this device.
OBJECT-TYPE    
  INTEGER  

tn3270KeyTable 1.3.6.1.4.1.33.10.7.5
A list of tn3270 key entries by device.
OBJECT-TYPE    
  SEQUENCE OF  
    Tn3270KeyEntry

tn3270KeyEntry 1.3.6.1.4.1.33.10.7.5.1
Tn3270 parameter values for a key entry for a device.
OBJECT-TYPE    
  Tn3270KeyEntry  

tn3270KeyDeviceName 1.3.6.1.4.1.33.10.7.5.1.1
The name of a generic terminal device as in tn3270DeviceName. Corresponds directly to SERVER TN3270 DEVICE and the value labeled 'Device Name:' in the SERVER TN3270 DEVICE display.
OBJECT-TYPE    
  DisplayString SIZE(1..8)  

tn3270KeyName 1.3.6.1.4.1.33.10.7.5.1.2
The key name to which this entry applies. Corresponds directly to the key portion of SERVER TN3270 DEVICE KEYMAP and the value labeled '3270-key' in the 'Keymap:' section of the SERVER TN3270 DEVICE display.
OBJECT-TYPE    
  INTEGER newline(1), tab(2), backtab(3), cursorup(4), cursorleft(5), cursorright(6), cursordown(7), home(8), delete(9), eraseeof(10), eraseinput(11), insert(12), flushinput(13), refresh(14), centsign(15), duplicate(16), fieldmark(17), scroll(18), status(19), reset(20), fastleft(21), fastright(22), showkeys(23), print(24), pf1(39), pf2(40), pf3(41), pf4(42), pf5(43), pf6(44), pf7(45), pf8(46), pf9(47), pf10(48), pf11(49), pf12(50), pf13(51), pf14(52), pf15(53), pf16(54), pf17(55), pf18(56), pf19(57), pf20(58), pf21(59), pf22(60), pf23(61), pf24(62), pa1(63), pa2(64), pa3(65), sysreq(66), enter(67), clear(68), cursorsel(69), test(70)  

tn3270KeyStatus 1.3.6.1.4.1.33.10.7.5.1.3
Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

tn3270KeyCharacterSequence 1.3.6.1.4.1.33.10.7.5.1.4
The ASCII character sequence for the key. Corresponds directly to the escape-sequence portion of SERVER TN3270 DEVICE KEYMAP and the value labeled 'KeyCode' in the 'Keymap:' section of the SERVER TN3270 DEVICE display.
OBJECT-TYPE    
  OCTET STRING SIZE(0..8)  

tn3270KeyDescription 1.3.6.1.4.1.33.10.7.5.1.5
Descriptive text for the key. Corresponds directly to the description portion of SERVER TN3270 DEVICE KEYMAP and the value labeled 'Description' in the SERVER TN3270 DEVICE display.
OBJECT-TYPE    
  DisplayString SIZE(0..5)  

tn3270ScreenTable 1.3.6.1.4.1.33.10.7.6
A list of tn3270 screen action entries by device.
OBJECT-TYPE    
  SEQUENCE OF  
    Tn3270ScreenEntry

tn3270ScreenEntry 1.3.6.1.4.1.33.10.7.6.1
Tn3270 parameter values for a screen action entry for a device.
OBJECT-TYPE    
  Tn3270ScreenEntry  

tn3270ScreenDeviceName 1.3.6.1.4.1.33.10.7.6.1.1
The name of a generic terminal device as in tn3270DeviceName. Corresponds directly to SERVER TN3270 DEVICE and the value labeled 'Device Name:' in the SERVER TN3270 DEVICE display.
OBJECT-TYPE    
  DisplayString SIZE(1..8)  

tn3270ScreenActionName 1.3.6.1.4.1.33.10.7.6.1.2
The screen action to which this entry applies. Corresponds directly to the action portion of SERVER TN3270 DEVICE SCREENMAP and the value labeled 'Terminal Function' in the 'Screenmap: section of the SERVER TN3270 DEVICE display.
OBJECT-TYPE    
  INTEGER eraseeol(1), clearscr(2), movecursor(3), col132(4), col80(5), beep(6), charset(7), boldon(8), boldoff(9), blinkon(10), blinkoff(11), underscoreon(12), underscoreoff(13), reverseon(14), reverseoff(15), colorBlue(16), colorRed(17), colorPink(18), colorGreen(19), colorTurquoise(20), colorYellow(21), colorWhite(22), status1(26), status2(27), reset1(28), reset2(29), reset3(30), reset4(31), base(32), sgr(33)  

tn3270ScreenStatus 1.3.6.1.4.1.33.10.7.6.1.3
Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

tn3270ScreenCharacterSequence 1.3.6.1.4.1.33.10.7.6.1.4
The ASCII character sequence for the screen action. Some actions may have a lesser length limit. Corresponds directly to the escape-sequence portion of SERVER TN3270 DEVICE SCREENMAP and the value labeled 'HexCode' in the 'Screenmap: section of the SERVER TN3270 DEVICE display.
OBJECT-TYPE    
  OCTET STRING SIZE(0..15)  

tn3270LanguageTable 1.3.6.1.4.1.33.10.7.7
A list of tn3270 language entries.
OBJECT-TYPE    
  SEQUENCE OF  
    Tn3270LanguageEntry

tn3270LanguageEntry 1.3.6.1.4.1.33.10.7.7.1
Tn3270 parameter values for a language entry.
OBJECT-TYPE    
  Tn3270LanguageEntry  

tn3270LanguageName 1.3.6.1.4.1.33.10.7.7.1.1
The name of language for character translation tables. Corresponds directly to SERVER TN3270 LANGUAGE and the value labeled 'Language Name:' in the SERVER LANGUAGE display.
OBJECT-TYPE    
  DisplayString SIZE(1..8)  

tn3270LanguageStatus 1.3.6.1.4.1.33.10.7.7.1.2
Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. If a new device table entry is added to the table, the agent will copy the USENGLSH table as the default.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

eToALanguageTable 1.3.6.1.4.1.33.10.7.8
A list of language EBCDIC to ASCII conversion entries.
OBJECT-TYPE    
  SEQUENCE OF  
    EToALanguageEntry

eToALanguageEntry 1.3.6.1.4.1.33.10.7.8.1
EBCDIC to ASCII parameter values for a language entry.
OBJECT-TYPE    
  EToALanguageEntry  

eToALanguageName 1.3.6.1.4.1.33.10.7.8.1.1
The name of language from the language table.
OBJECT-TYPE    
  DisplayString SIZE(1..8)  

eToAOffset 1.3.6.1.4.1.33.10.7.8.1.2
EBCDIC character offset plus one, that is, the value 1 corresponds to an operational offset of 0. Corresponds directly to the offset portion of SERVER TN3270 LANGUAGE and the hexadecimal labels around the conversion table labeled 'EBCDIC to ASCII' in the SERVER LANGUAGE display.
OBJECT-TYPE    
  INTEGER 65..256  

eToAValue 1.3.6.1.4.1.33.10.7.8.1.3
ASCII character value for the EBCDIC offset. Corresponds directly to the value portion of SERVER TN3270 LANGUAGE and the values in the conversion table labeled 'EBCDIC to ASCII' in the SERVER LANGUAGE display.
OBJECT-TYPE    
  INTEGER 32..255  

aToELanguageTable 1.3.6.1.4.1.33.10.7.9
A list of language ASCII to EBCDIC conversion entries.
OBJECT-TYPE    
  SEQUENCE OF  
    AToELanguageEntry

aToELanguageEntry 1.3.6.1.4.1.33.10.7.9.1
ASCII to EBCDIC parameter values for a language entry.
OBJECT-TYPE    
  AToELanguageEntry  

aToELanguageName 1.3.6.1.4.1.33.10.7.9.1.1
The name of language from the language table.
OBJECT-TYPE    
  DisplayString SIZE(1..8)  

aToEOffset 1.3.6.1.4.1.33.10.7.9.1.2
ASCII character offset plus one, that is, the value 1 corresponds to an operational offset of 0. Corresponds directly to the offset portion of SERVER TN3270 LANGUAGE and the hexadecimal labels around the conversion table labeled 'ASCII to EBCDIC' in the SERVER LANGUAGE display.
OBJECT-TYPE    
  INTEGER 33..256  

aToEValue 1.3.6.1.4.1.33.10.7.9.1.3
EBCDIC character value for the ASCII offset. Corresponds directly to the value portion of SERVER TN3270 LANGUAGE and the values in the conversion table labeled 'ASCII to EBCDIC' in the SERVER LANGUAGE display.
OBJECT-TYPE    
  INTEGER 0..255  

tn3270PortTable 1.3.6.1.4.1.33.10.7.10
A list of tn3270 character port entries.
OBJECT-TYPE    
  SEQUENCE OF  
    Tn3270PortEntry

tn3270PortEntry 1.3.6.1.4.1.33.10.7.10.1
Parameter values for a tn3270 port.
OBJECT-TYPE    
  Tn3270PortEntry  

tn3270PortIndex 1.3.6.1.4.1.33.10.7.10.1.1
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.
OBJECT-TYPE    
  INTEGER  

tn3270PortDeviceName 1.3.6.1.4.1.33.10.7.10.1.2
The name of a generic terminal device from the tn3270 device table. Corresponds directly to PORT TELNET TN3270 DEVICE and the value labeled 'Tn3270 Device:' in the PORT TELNET display.
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

tn3270PortLanguageName 1.3.6.1.4.1.33.10.7.10.1.3
The name of language from the tn3270 language table. Corresponds directly to PORT TELNET TN3270 LANGUAGE and the value labeled 'Tn3270 Language:' in the PORT TELNET display.
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

tn3270PortExtendedAttributes 1.3.6.1.4.1.33.10.7.10.1.4
A control indicating that certain 3270 extended attributes are supported on the port. Corresponds directly to PORT TELNET TN3270 XTDATTRS and the label 'Tn3270 XtdAttrs' following the label 'Enabled Characteristics' in the PORT TELNET display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

tn3270PortEorNegotiation 1.3.6.1.4.1.33.10.7.10.1.5
A control for negotiation of the Telnet EOR option when establishing a tn3270 session on the port. Corresponds directly to PORT TELNET TN3270 EOR and the label 'Tn3270 EOR' following the label 'Enabled Characteristics' in the PORT TELNET display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

tn3270PortErrorLock 1.3.6.1.4.1.33.10.7.10.1.6
A control for requiring use the RESET key when the host reports an error during a tn3270 session on the port. Corresponds directly to PORT TELNET TN3270 ERRORLOCK and the label 'Tn3270 ErrorLock' following the label 'Enabled Characteristics' in the PORT TELNET display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

tn3270PortPrinterPort 1.3.6.1.4.1.33.10.7.10.1.7
The port number of the tn3270 printer. Corresponds directly to PORT TELNET TN3270 PRINTER and the value labeled 'Tn3270 Printer:' in the PORT TELNET display.
OBJECT-TYPE    
  INTEGER  

tn3270PortOutgoingTcpPort 1.3.6.1.4.1.33.10.7.10.1.8
The TCP port which is used for a TN3270 session when connecting to a remote host from this serial port. Corresponds directly to the value labeled 'Tn3270 Default Port:' in the PORT TELNET CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 1..32767  

tn3270PortSpaceInsert 1.3.6.1.4.1.33.10.7.10.1.9
Control to allow insert mode within a space filled field, and write characters over EBCDIC spaces. Corresponds directly to the presence of 'Tn3270 Space_Insert' under the label 'Enabled Characteristics' in the PORT TELNET CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

tn3270PortTypeAhead 1.3.6.1.4.1.33.10.7.10.1.10
Control to permit typing ahead in a tn3270 session prior to receiving a response from the host for the previous command entered. Corresponds directly to the presence of 'Tn3270 TypeAhead' under the label 'Enabled Characteristics' in the PORT TELNET CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

tn3270PrefixKeyMap 1.3.6.1.4.1.33.10.7.10.1.11
Control to prepend a prefix function to another function key. When the operator hits the key the prepended function(s) and then the main function for the key are transmitted to the host. Corresponds directly to the presence of 'Tn3270 PrefixKeyMap' under the label 'Enabled Characteristics' in the PORT TELNET CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

tn3270PortScanner 1.3.6.1.4.1.33.10.7.10.1.12
Indicates that this is a tn3270 scanner port. Corresponds directly to the presence of 'Tn3270 SCANNER' under the label 'Enabled Characteristics' in the PORT TELNET CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

xKerberos 1.3.6.1.4.1.33.10.8
OBJECT IDENTIFIER    

kerbStatus 1.3.6.1.4.1.33.10.8.1
A control indicating the level of Kerberos operation on the system. Corresponds directly to SERVER KERBEROS STATUS and the value labeled 'Kerberos Security:' in the SERVER KERBEROS display.
OBJECT-TYPE    
  INTEGER none(1), login(2)  

kerbRealm 1.3.6.1.4.1.33.10.8.2
The Kerberos realm with which the kerbServerName1 and kerbServerName2 are associated. Corresponds directly to SERVER KERBEROS REALM and the value labeled 'Kerberos Realm:' in the SERVER KERBEROS display.
OBJECT-TYPE    
  DisplayString SIZE(0..40)  

kerbQueryLimit 1.3.6.1.4.1.33.10.8.3
The maximum number of attempts the system can make when trying to verify a Kerberos ID. Corresponds directly to SERVER KERBEROS QUERY LIMIT and the value labeled 'Kerberos Query Limit:' in the SERVER KERBEROS display.
OBJECT-TYPE    
  INTEGER 1..16  

kerbMasterName 1.3.6.1.4.1.33.10.8.4
The Domain name of the Kerberos master host system, which holds the Kerberos database. Corresponds directly to SERVER KERBEROS MASTER and the value labeled 'Kerberos Master:' in the SERVER KERBEROS display.
OBJECT-TYPE    
  DisplayString SIZE(0..50)  

kerbServerName1 1.3.6.1.4.1.33.10.8.5
The Domain name of the first Kerberos server to try when the system verifys a Kerberos ID. Corresponds directly to SERVER KERBEROS PRIMARY SERVER and the value labeled 'Kerberos Primary Server:' in the SERVER KERBEROS display.
OBJECT-TYPE    
  DisplayString SIZE(0..50)  

kerbServerName2 1.3.6.1.4.1.33.10.8.6
The Domain name of the Kerberos server to try when the system verifys a Kerberos ID and cannot reach the Kerberos primary server. Corresponds directly to SERVER KERBEROS SECONDARY SERVER and the value labeled 'Kerberos Secondary Server:' in the SERVER KERBEROS display.
OBJECT-TYPE    
  DisplayString SIZE(0..50)  

kerbInsecureLogins 1.3.6.1.4.1.33.10.8.7
The number of user logins on ports for which Kerberos user verification is not enabled. Corresponds directly to the value labeled 'Logins without Kerberos:' in the SERVER KERBEROS display.
OBJECT-TYPE    
  Counter  

kerbSecureLogins 1.3.6.1.4.1.33.10.8.8
The number of successful user logins on ports for which Kerberos user verification is enabled. Corresponds directly to the value labeled 'Successful Logins:' in the SERVER KERBEROS display.
OBJECT-TYPE    
  Counter  

kerbSecureLoginsFailed 1.3.6.1.4.1.33.10.8.9
The number of verification failures due to incorrect ID or password for attempted user logins on ports for which Kerberos user verification is enabled. Corresponds directly to the value labeled 'Unsuccessful Logins:' in the SERVER KERBEROS display.
OBJECT-TYPE    
  Counter  

kerbPasswordChangeFailed 1.3.6.1.4.1.33.10.8.10
The number of user failures to change their Kerberos password due to invalid old password or new password verification. Corresponds directly to the value labeled 'Password Change Failures:' in the SERVER KERBEROS display.
OBJECT-TYPE    
  Counter  

kerbError 1.3.6.1.4.1.33.10.8.11
The error number of the most recent Kerberos-related failure. Corresponds directly to the value labeled 'Last Kerberos Error:' in the SERVER KERBEROS display. For a list of error numbers and their meanings, consult relevant MRV In-Reach or Kerberos documentation.
OBJECT-TYPE    
  INTEGER  

kerbErrorTime 1.3.6.1.4.1.33.10.8.12
The date and time that kerbError was last updated. Corresponds directly to the value labeled 'Occurred:' in the SERVER KERBEROS display.
OBJECT-TYPE    
  DateTime  

kerbMasterAccess 1.3.6.1.4.1.33.10.8.13
The number of times the system successfully accessed the Kerberos master host. Corresponds directly to the value labeled 'Attempts to access:', 'Master', and 'Successful:' in the SERVER KERBEROS display.
OBJECT-TYPE    
  Counter  

kerbMasterAccessFailed 1.3.6.1.4.1.33.10.8.14
The number of times the system failed access to the Kerberos master host. Corresponds directly to the value labeled 'Attempts to access:', 'Master', and 'Unsuccessful:' in the SERVER KERBEROS display.
OBJECT-TYPE    
  Counter  

kerbServerAccess1 1.3.6.1.4.1.33.10.8.15
The number of times the system successfully accessed the Kerberos primary server. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', and 'Successful:' in the SERVER KERBEROS display.
OBJECT-TYPE    
  Counter  

kerbServerAccessFailed1 1.3.6.1.4.1.33.10.8.16
The number of times the system failed access to the Kerberos primary server. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', and 'Unsuccessful:' in the SERVER KERBEROS display.
OBJECT-TYPE    
  Counter  

kerbServerAccess2 1.3.6.1.4.1.33.10.8.17
The number of times the system successfully accessed the Kerberos secondary server. Corresponds directly to the value labeled 'Attempts to access:', 'Server2', and 'Successful:' in the SERVER KERBEROS display.
OBJECT-TYPE    
  Counter  

kerbServerAccessFailed2 1.3.6.1.4.1.33.10.8.18
The number of times the system failed access to the Kerberos secondary server. Corresponds directly to the value labeled 'Attempts to access:', 'Server2', and 'Unsuccessful:' in the SERVER KERBEROS display.
OBJECT-TYPE    
  Counter  

kerbPortTable 1.3.6.1.4.1.33.10.8.19
A list of Kerberos character port entries.
OBJECT-TYPE    
  SEQUENCE OF  
    KerbPortEntry

kerbPortEntry 1.3.6.1.4.1.33.10.8.19.1
Parameter values for a Kerberos port.
OBJECT-TYPE    
  KerbPortEntry  

kerbPortIndex 1.3.6.1.4.1.33.10.8.19.1.1
An index value that uniquely identifies a port could relate to Kerberos. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.
OBJECT-TYPE    
  INTEGER  

kerbPortStatus 1.3.6.1.4.1.33.10.8.19.1.2
A control indicating the level of Kerberos operation on the port. Corresponds directly to PORT KERBEROS and the value 'Kerberos' following the label 'Enabled Characteristics' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER none(1), login(2)  

kerbServerPort 1.3.6.1.4.1.33.10.8.20
The UDP port number on the Kerberos server where Kerberos messages are sent.
OBJECT-TYPE    
  INTEGER standardPort(88), experimentalPort(750)  

xPortSecurity 1.3.6.1.4.1.33.10.9
OBJECT IDENTIFIER    

psEntryNumber 1.3.6.1.4.1.33.10.9.1
The number of security entries in this system's port security table with psEntryStatus of 'valid'.
OBJECT-TYPE    
  INTEGER  

psEntryNumberLimit 1.3.6.1.4.1.33.10.9.2
The maximum number of security entries in this system's port security table.
OBJECT-TYPE    
  INTEGER  

psEntryInvalidIndex 1.3.6.1.4.1.33.10.9.3
A value of psEntryIndex for an entry that has psEntryStatus of 'invalid'. A management station may choose this value when adding a new entry. Collisions between independent management stations simultaneously using the same number are beyond the scope of this document.
OBJECT-TYPE    
  INTEGER  

psPortTable 1.3.6.1.4.1.33.10.9.4
A list of port security character port entries.
OBJECT-TYPE    
  SEQUENCE OF  
    PsPortEntry

psPortEntry 1.3.6.1.4.1.33.10.9.4.1
Port security parameter values for a port.
OBJECT-TYPE    
  PsPortEntry  

psPortIndex 1.3.6.1.4.1.33.10.9.4.1.1
An index value that uniquely identifies a port for security purposes. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.
OBJECT-TYPE    
  INTEGER  

psPortDefaultInboundAccess 1.3.6.1.4.1.33.10.9.4.1.2
The default access to the port for incoming TCP connections. Corresponds directly to PORT INTERNET SECURITY DEFAULT INBOUND and the value labeled 'Inbound Default:' in the PORT INTERNET SECURITY display.
OBJECT-TYPE    
  INTEGER allow(1), deny(2)  

psPortDefaultOutboundAccess 1.3.6.1.4.1.33.10.9.4.1.3
The default access to the port for outgoing TCP connections. Corresponds directly to PORT INTERNET SECURITY DEFAULT OUTBOUND and the value labeled 'Outbound Default:' in the PORT INTERNET SECURITY display.
OBJECT-TYPE    
  INTEGER allow(1), deny(2)  

psClrInternetSecurity 1.3.6.1.4.1.33.10.9.4.1.4
A control for if the internet security entries for this port will be cleared upon port logout. The default is disabled.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

psTable 1.3.6.1.4.1.33.10.9.5
A list of port security entries.
OBJECT-TYPE    
  SEQUENCE OF  
    PsEntry

psEntry 1.3.6.1.4.1.33.10.9.5.1
Port security parameter values for an entry for a port.
OBJECT-TYPE    
  PsEntry  

psEntryIndex 1.3.6.1.4.1.33.10.9.5.1.1
A small, numeric distinguisher for port security entries. When adding a new entry, the client should specify an unused value, such as psEntryInvalidIndex. Corresponds directly to the value labeled 'Entry' in the SERVER INTERNET SECURITY display.
OBJECT-TYPE    
  INTEGER  

psEntryStatus 1.3.6.1.4.1.33.10.9.5.1.2
Status of this entry. Setting the value to 'invalid' invalidates the entry, corresponding directly to the CLEAR INTERNET SECURITY command. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Setting this object to 'valid' has no effect. When creating a new instance, one must set psEntryAddress, psEntryMask, psEntryAccess, psEntryDirection and psEntryPortList for the new instance in the same physical set request. Furthermore, if one wishes to change an entry, one must first delete it and then add it with its new values.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

psEntryAddress 1.3.6.1.4.1.33.10.9.5.1.3
The IP address to which the entry pertains. Corresponds directly to the PORT INTERNET SECURITY internet address and the value labeled 'Internet Address' in the SERVER INTERNET SECURITY display.
OBJECT-TYPE    
  IpAddress  

psEntryMask 1.3.6.1.4.1.33.10.9.5.1.4
The mask applied to psEntryAddress when making a security check based on this entry. Corresponds directly to PORT INTERNET SECURITY MASK and the value labeled 'Security Mask' in the SERVER INTERNET SECURITY display.
OBJECT-TYPE    
  IpAddress  

psEntryAccess 1.3.6.1.4.1.33.10.9.5.1.5
The access to the port for TCP connections when making a security check based on this entry. Corresponds directly to PORT INTERNET SECURITY ALLOW or DENY and the value labeled 'Access' in the SERVER INTERNET SECURITY display.
OBJECT-TYPE    
  INTEGER allow(1), deny(2)  

psEntryDirection 1.3.6.1.4.1.33.10.9.5.1.6
The direction of TCP connections to which this entry applies. Corresponds directly to PORT INTERNET SECURITY INBOUND or OUTBOUND and the value labeled 'Direction' in the SERVER INTERNET SECURITY display.
OBJECT-TYPE    
  INTEGER inbound(1), outbound(2)  

psEntryPortMap 1.3.6.1.4.1.33.10.9.5.1.7
The list of character ports to which this entry applies. The OCTET STRING contains a bitmap, with one bit for each port, and enough octets for all the ports on the system. Port numbers are as defined for charPortIndex in the Proposed Standard Internet Character MIB. Corresponding bit numbers start with 1 as the high-order bit of the first octet. Corresponds directly to PORT INTERNET SECURITY and the value labeled 'Ports' in the SERVER INTERNET SECURITY display.
OBJECT-TYPE    
  OCTET STRING  

xXremote 1.3.6.1.4.1.33.10.10
OBJECT IDENTIFIER    

xremoteServerName1 1.3.6.1.4.1.33.10.10.1
The Domain name of the first XREMOTE font server to try for downloading fonts. Corresponds directly to SERVER XREMOTE PRIMARY SERVER and the value labeled 'Xremote Primary Font Server:' in the SERVER XREMOTE display.
OBJECT-TYPE    
  DisplayString SIZE(0..50)  

xremoteServerName2 1.3.6.1.4.1.33.10.10.2
The Domain name of the XREMOTE font server to try for downloading fonts and the primary font server does not respond. Corresponds directly to SERVER XREMOTE SECONDARY SERVER and the value labeled 'Xremote Secondary Font Server:' in the SERVER XREMOTE display.
OBJECT-TYPE    
  DisplayString SIZE(0..50)  

xremoteServerAccess1 1.3.6.1.4.1.33.10.10.3
The number of times the system successfully accessed the XREMOTE primary font server. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', and 'Successful:' in the SERVER XREMOTE display.
OBJECT-TYPE    
  Counter  

xremoteServerAccessFailed1 1.3.6.1.4.1.33.10.10.4
The number of times the system failed access to the XREMOTE primary font server. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', and 'Unsuccessful:' in the SERVER XREMOTE display.
OBJECT-TYPE    
  Counter  

xremoteServerAccess2 1.3.6.1.4.1.33.10.10.5
The number of times the system successfully accessed the XREMOTE secondary font server. Corresponds directly to the value labeled 'Attempts to access:', 'Server2', and 'Successful:' in the SERVER XREMOTE display.
OBJECT-TYPE    
  Counter  

xremoteServerAccessFailed2 1.3.6.1.4.1.33.10.10.6
The number of times the system failed access to the XREMOTE secondary font server. Corresponds directly to the value labeled 'Attempts to access:', 'Server2', and 'Unsuccessful:' in the SERVER XREMOTE display.
OBJECT-TYPE    
  Counter  

xremoteSessions 1.3.6.1.4.1.33.10.10.7
The number of connected XREMOTE sessions. Corresponds directly to the value labeled 'Current Number of Xremote Sessions:' in the SERVER XREMOTE display.
OBJECT-TYPE    
  Gauge  

xremotePortTable 1.3.6.1.4.1.33.10.10.8
A list of XREMOTE character port entries.
OBJECT-TYPE    
  SEQUENCE OF  
    XremotePortEntry

xremotePortEntry 1.3.6.1.4.1.33.10.10.8.1
XREMOTE parameter values for a port.
OBJECT-TYPE    
  XremotePortEntry  

xremotePortIndex 1.3.6.1.4.1.33.10.10.8.1.1
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.
OBJECT-TYPE    
  INTEGER  

xremotePortXremote 1.3.6.1.4.1.33.10.10.8.1.2
Control for use of XREMOTE on the port. Corresponds directly to PORT XREMOTE and the presence of the label 'Xremote' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

xremotePortXdmQuery 1.3.6.1.4.1.33.10.10.8.1.3
The type of query message issued by a port when searching for an X Display Manager (XDM). Corresponds directly to the PORT XDM QUERY and the 'XDM Query:' in the PORT ALTERNATE CHARACTERISTICS display
OBJECT-TYPE    
  INTEGER specific(1), broadcast(2), indirect(3)  

xremotePortXdmHost 1.3.6.1.4.1.33.10.10.8.1.4
The Domain name or Internet address of the X Display Manager (XDM) for a port. Corresponds directly to the PORT XDM HOST and the 'XDM Host:' in the PORT ALTERNATE CHARACTERISTICS display
OBJECT-TYPE    
  DisplayString SIZE(0..50)  

xremoteServerClients 1.3.6.1.4.1.33.10.10.9
The number of active X clients. Corresponds directly to the value labeled 'Current Number of XClients:' in the SERVER XREMOTE display.
OBJECT-TYPE    
  Gauge  

xRotary 1.3.6.1.4.1.33.10.11
OBJECT IDENTIFIER    

rotaryNumber 1.3.6.1.4.1.33.10.11.1
The number of entries in the Rotary table.
OBJECT-TYPE    
  INTEGER  

rotaryTable 1.3.6.1.4.1.33.10.11.2
A list of rotary entries.
OBJECT-TYPE    
  SEQUENCE OF  
    RotaryEntry

rotaryEntry 1.3.6.1.4.1.33.10.11.2.1
Parameter values for a rotary.
OBJECT-TYPE    
  RotaryEntry  

rotaryAddress 1.3.6.1.4.1.33.10.11.2.1.1
The internet address to be recognized as a rotary. Corresponds directly to the ip-address portion of SERVER INTERNET ROTARY and the value labeled 'Internet Address' in the SERVER INTERNET ROTARY display.
OBJECT-TYPE    
  IpAddress  

rotaryStatus 1.3.6.1.4.1.33.10.11.2.1.2
Status of this entry. Setting the value to 'invalid' invalidates the entry, corresponding directly to the CLEAR SERVER INTERNET ROTARY command. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Setting the value to 'valid' in conjunction with a new rotaryAddress will add a new entry to the table. When adding a new entry, one should also specify a rotaryPortMap as the DEFVAL of 0..0 for rotaryPortMap is meaningless.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

rotaryPortMap 1.3.6.1.4.1.33.10.11.2.1.3
The list of character ports that compose the rotary. The OCTET STRING contains a bitmap, with one bit for each port, and enough octets for all the ports on the system. Port numbers are as defined for charPortIndex in the Proposed Standard Internet Character MIB. Corresponding bit numbers start with 1 as the high-order bit of the first octet. Corresponds directly to port-list portion of SERVER INTERNET ROTARY and the value labeled 'Ports' in the SERVER INTERNET ROTARY display.
OBJECT-TYPE    
  OCTET STRING  

xEgp 1.3.6.1.4.1.33.10.12
OBJECT IDENTIFIER    

egpRouting 1.3.6.1.4.1.33.10.12.1
Control for EGP routing services.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

egpStatus 1.3.6.1.4.1.33.10.12.2
Status of the EGP routing services indicating why it is not running.
OBJECT-TYPE    
  INTEGER active(1), noMemory(2), noIpRouting(3), noEgpRouting(4), noNeighbors(5), noAS(6)  

egpNbrTable 1.3.6.1.4.1.33.10.12.3
The EGP neighbor table.
OBJECT-TYPE    
  SEQUENCE OF  
    EgpNbrEntry

egpNbrEntry 1.3.6.1.4.1.33.10.12.3.1
Information about this entity's relationship with a particular EGP neighbor.
OBJECT-TYPE    
  EgpNbrEntry  

egpNbrAddr 1.3.6.1.4.1.33.10.12.3.1.1
The IP address of this entry's EGP neighbor.
OBJECT-TYPE    
  IpAddress  

egpNbrIntervalDead 1.3.6.1.4.1.33.10.12.3.1.2
The interval upon entering the cease or idle state before automatically assuming a Start Event has occured. If a neighbor does not respond within 5 minutes, a Stop Event will automatically occur. The interval is in hundredths of seconds.
OBJECT-TYPE    
  INTEGER 0..65535  

egpNbrStatus 1.3.6.1.4.1.33.10.12.3.1.3
The status of the entry for this neighbor. Set to 'invalid' to remove the entry.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

xOspf 1.3.6.1.4.1.33.10.13
OBJECT IDENTIFIER    

ospfAutoConfigure 1.3.6.1.4.1.33.10.13.1
Control whether OSPF will automatically configure itself.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

ospfStatus 1.3.6.1.4.1.33.10.13.2
Status of the OSPF routing services indicating why it is not running.
OBJECT-TYPE    
  INTEGER active(1), noMemory(2), noIpRouting(3), noOspfRouting(4), noAreas(5), noInterfaces(6), noRtrId(7), noBackBoneAndVirtualInterfaces(8), noBackBoneAndInterface(9), noBackBone(10)  

ospfIfMtrcTable 1.3.6.1.4.1.33.10.13.3
The TOS metrics for a non-virtual interface identified by the interface index.
OBJECT-TYPE    
  SEQUENCE OF  
    OspfIfMtrcEntry

ospfIfMtrcEntry 1.3.6.1.4.1.33.10.13.3.1
A particular TOS metric for a non-virtual interface identified by the interface index.
OBJECT-TYPE    
  OspfIfMtrcEntry  

ospfIfMtrcIpAddress 1.3.6.1.4.1.33.10.13.3.1.1
Same as ospfIfMetricIpAddress in OSPF MIB, the IP address of this OSPF interface.
OBJECT-TYPE    
  IpAddress  

ospfIfMtrcAddressLessIf 1.3.6.1.4.1.33.10.13.3.1.2
Same as ospfIfMetricAddressLessIf in OSPF MIB, for the purpose of easing the instancing of addressed and addressless interfaces. This variable takes the value 0 on interfaces with IP Addresses, and the value of ifIndex for interfaces having no IP Address.
OBJECT-TYPE    
  INTEGER  

ospfIfMtrcTos 1.3.6.1.4.1.33.10.13.3.1.3
Same as ospfIfMetricTOS in OSPF MIB, the type of service metric being referenced.
OBJECT-TYPE    
  INTEGER 1..16  

ospfIfMtrcCostActual 1.3.6.1.4.1.33.10.13.3.1.4
The actual cost of the metric in case it was set to auto.
OBJECT-TYPE    
  INTEGER 1..65535  

ospfXIfTable 1.3.6.1.4.1.33.10.13.4
The TOS metrics for a non-virtual interface identified by the interface index.
OBJECT-TYPE    
  SEQUENCE OF  
    OspfXIfEntry

ospfXIfEntry 1.3.6.1.4.1.33.10.13.4.1
Interface parameters for OSPF.
OBJECT-TYPE    
  OspfXIfEntry  

ospfXIfIpAddress 1.3.6.1.4.1.33.10.13.4.1.1
Same as ospfIfIpAddress in OSPF MIB, the IP address of this OSPF interface.
OBJECT-TYPE    
  IpAddress  

ospfXIfAddressLessIf 1.3.6.1.4.1.33.10.13.4.1.2
Same as ospfIfAddressLessIf in OSPF MIB, for the purpose of easing the instancing of addressed and addressless interfaces. This variable takes the value 0 on interfaces with IP Addresses, and the value of ifIndex for interfaces having no IP Address.
OBJECT-TYPE    
  INTEGER  

ospfXIfTypeActual 1.3.6.1.4.1.33.10.13.4.1.3
The interface type.
OBJECT-TYPE    
  INTEGER broadcast(1), nonbroadcast(2), pointToPoint(3)  

ospfXIfStatus 1.3.6.1.4.1.33.10.13.4.1.4
The status of the interface entry, including the entry in the standard OSPF MIB. Set to 'invalid' to remove the entry.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

ospfXAreaTable 1.3.6.1.4.1.33.10.13.5
Parameters for an OSPF area.
OBJECT-TYPE    
  SEQUENCE OF  
    OspfXAreaEntry

ospfXAreaEntry 1.3.6.1.4.1.33.10.13.5.1
An area entry.
OBJECT-TYPE    
  OspfXAreaEntry  

ospfXAreaId 1.3.6.1.4.1.33.10.13.5.1.1
Same as ospfAreaId in OSPF MIB, the ID of the area.
OBJECT-TYPE    
  IpAddress  

ospfXAreaStatus 1.3.6.1.4.1.33.10.13.5.1.2
The status of the area entry, including the entry in the standard OSPF MIB. Set to 'invalid' to remove the entry.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

xRouterIp 1.3.6.1.4.1.33.10.14
OBJECT IDENTIFIER    

ipAdExtTable 1.3.6.1.4.1.33.10.14.1
Table of additional fields indexed by local IP address. An entry in this table is created or deleted when an entry in the ipAddrTable is created or deleted.
OBJECT-TYPE    
  SEQUENCE OF  
    IpAdExtEntry

ipAdExtEntry 1.3.6.1.4.1.33.10.14.1.1
A particular entry.
OBJECT-TYPE    
  IpAdExtEntry  

ipAdEntExtAddress 1.3.6.1.4.1.33.10.14.1.1.1
Same as ipAdEntAddr, a local address representing a network connection.
OBJECT-TYPE    
  IpAddress  

ipAdEntExtProxyArp 1.3.6.1.4.1.33.10.14.1.1.2
Controls whether proxy ARP is active for this local address.
OBJECT-TYPE    
  INTEGER enabled(2), disabled(1)  

ipAdEntExtRip 1.3.6.1.4.1.33.10.14.1.1.3
Controls whether RIP as a router discovery protocol is active for this local address.
OBJECT-TYPE    
  INTEGER enabled(2), disabled(1)  

ipRouterIfTable 1.3.6.1.4.1.33.10.14.2
Table of IP router values indexed by interface.
OBJECT-TYPE    
  SEQUENCE OF  
    IpRouterIfEntry

ipRouterIfEntry 1.3.6.1.4.1.33.10.14.2.1
A particular entry.
OBJECT-TYPE    
  IpRouterIfEntry  

ipRouterIfIndex 1.3.6.1.4.1.33.10.14.2.1.1
The index of the interface; same as IfIndex.
OBJECT-TYPE    
  INTEGER  

ipRouterIfProtocolPriority 1.3.6.1.4.1.33.10.14.2.1.2
The priority at which all Internet routed packets will be placed on the WAN output queue.
OBJECT-TYPE    
  INTEGER low(1), medium(3), high(5)  

ipRouterIfMTU 1.3.6.1.4.1.33.10.14.2.1.3
The size of the largest datagram that IP can transmit on this interface. The default value is actually hardware dependent.
OBJECT-TYPE    
  INTEGER 128..65535  

ipRouterIfRDP 1.3.6.1.4.1.33.10.14.2.1.4
Control for whether the router side of the Router Discovery Protocol is running on this interface.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipRouterIfArpPacketsIn 1.3.6.1.4.1.33.10.14.2.1.5
The number of ARP packets received on this interface.
OBJECT-TYPE    
  Counter  

ipRouterIfArpPacketsOut 1.3.6.1.4.1.33.10.14.2.1.6
The number of ARP packets sent on this interface.
OBJECT-TYPE    
  Counter  

ipRouterIfPacketsIn 1.3.6.1.4.1.33.10.14.2.1.7
The number of IP packets received on this interface.
OBJECT-TYPE    
  Counter  

ipRouterIfPacketsOut 1.3.6.1.4.1.33.10.14.2.1.8
The number of IP packets sent on this interface.
OBJECT-TYPE    
  Counter  

ipRouterIfForwardsIn 1.3.6.1.4.1.33.10.14.2.1.9
The number of IP packets received on this interface that were forwarded.
OBJECT-TYPE    
  Counter  

ipRouterIfForwardsOut 1.3.6.1.4.1.33.10.14.2.1.10
The number of IP packets sent on this interface that were forwarded.
OBJECT-TYPE    
  Counter  

xIpTraffic 1.3.6.1.4.1.33.10.14.3
OBJECT IDENTIFIER    

ipTrafficSort 1.3.6.1.4.1.33.10.14.3.1
Setting to 'execute' causes the most recent traffic information to be sorted into the ipTrafficTable. The sorting precedence is: decreasing percentage, increasing destination address, increasing source address, and increasing interface number. Setting to 'ready' has no effect.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

ipTrafficTable 1.3.6.1.4.1.33.10.14.3.2
A list of traffic entries, sorted in the order specified by ipTrafficSort.
OBJECT-TYPE    
  SEQUENCE OF  
    IpTrafficEntry

ipTrafficEntry 1.3.6.1.4.1.33.10.14.3.2.1
A traffic entry.
OBJECT-TYPE    
  IpTrafficEntry  

ipTrafficIndex 1.3.6.1.4.1.33.10.14.3.2.1.1
Identification of this traffic entry.
OBJECT-TYPE    
  INTEGER  

ipTrafficPercent 1.3.6.1.4.1.33.10.14.3.2.1.2
The percentage of total traffic that this traffic entry represents, in tenths of a percent.
OBJECT-TYPE    
  INTEGER  

ipTrafficDstAddr 1.3.6.1.4.1.33.10.14.3.2.1.3
The destination IP address of the traffic entry.
OBJECT-TYPE    
  IpAddress  

ipTrafficSrcAddr 1.3.6.1.4.1.33.10.14.3.2.1.4
The source IP address of the traffic entry.
OBJECT-TYPE    
  IpAddress  

ipTrafficProtocol 1.3.6.1.4.1.33.10.14.3.2.1.5
The IP protocol type of the traffic entry.
OBJECT-TYPE    
  INTEGER 0..255  

ipTrafficDstPort 1.3.6.1.4.1.33.10.14.3.2.1.6
The destination TCP/UDP port of the traffic entry.
OBJECT-TYPE    
  INTEGER 0..65535  

ipTrafficSrcPort 1.3.6.1.4.1.33.10.14.3.2.1.7
The source TCP/UDP port of the traffic entry.
OBJECT-TYPE    
  INTEGER 0..65535  

ipTrafficIf 1.3.6.1.4.1.33.10.14.3.2.1.8
The inbound interface to which the traffic entry applies. This value is the same as IfIndex.
OBJECT-TYPE    
  INTEGER  

ipTrafficMonitoring 1.3.6.1.4.1.33.10.14.3.3
Control for whether the router side of the Router Discovery Protocol is running on this interface.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

xIpNetToMediaTable 1.3.6.1.4.1.33.10.14.4
MRV In-Reach extensions to the IP Address Translation Table.
OBJECT-TYPE    
  SEQUENCE OF  
    XIpNetToMediaEntry

xIpNetToMediaEntry 1.3.6.1.4.1.33.10.14.4.1
Entry parameters.
OBJECT-TYPE    
  XIpNetToMediaEntry  

xIpNetToMediaCircuit 1.3.6.1.4.1.33.10.14.4.1.1
An additional identifier for the circuit (i.e. Frame Relay DLCI or X.25 VC) which the entry extends.
OBJECT-TYPE    
  INTEGER  

xIpNetToMediaReverseArp 1.3.6.1.4.1.33.10.14.4.1.2
Whether reverse ARP is supported on this entry.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

xRouterUdp 1.3.6.1.4.1.33.10.15
OBJECT IDENTIFIER    

udpBcstServerTable 1.3.6.1.4.1.33.10.15.1
Table of servers to whom UDP broadcast messages will be forwarded.
OBJECT-TYPE    
  SEQUENCE OF  
    UdpBcstServerEntry

udpBcstServerEntry 1.3.6.1.4.1.33.10.15.1.1
A particular entry.
OBJECT-TYPE    
  UdpBcstServerEntry  

udpBcstServerAddress 1.3.6.1.4.1.33.10.15.1.1.1
Internet address of the server.
OBJECT-TYPE    
  IpAddress  

udpBcstServerStatus 1.3.6.1.4.1.33.10.15.1.1.2
The status of the server. Set to 'invalid' to remove the entry.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

udpBcstPortTable 1.3.6.1.4.1.33.10.15.2
Table of incoming UDP destination port numbers for which UDP broadcasts will be forwarded.
OBJECT-TYPE    
  SEQUENCE OF  
    UdpBcstPortEntry

udpBcstPortEntry 1.3.6.1.4.1.33.10.15.2.1
A particular entry.
OBJECT-TYPE    
  UdpBcstPortEntry  

udpBcstPort 1.3.6.1.4.1.33.10.15.2.1.1
The incoming destination UDP port number.
OBJECT-TYPE    
  INTEGER  

udpBcstPortStatus 1.3.6.1.4.1.33.10.15.2.1.2
The status of broadcast forwarding for the port. Set to 'invalid' to remove the entry.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

udpBcstRouting 1.3.6.1.4.1.33.10.15.3
The indication of whether this entity forwards UDP broadcasts.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

xRouterPolicy 1.3.6.1.4.1.33.10.16
OBJECT IDENTIFIER    

xImport 1.3.6.1.4.1.33.10.16.1
OBJECT IDENTIFIER    

impEgpRuleTable 1.3.6.1.4.1.33.10.16.1.1
The EGP import table.
OBJECT-TYPE    
  SEQUENCE OF  
    ImpEgpRuleEntry

impEgpRuleEntry 1.3.6.1.4.1.33.10.16.1.1.1
An EGP import rule. Each rule is keyed by the Autonomous System of the EGP neighbor and the IP network of the route learned from the neighbor. The AS can be set to a wild card as can the IP network. When a route is learned from a neighbor, the most specific import rule is applied to the route. The route is either accepted or discarded and its metrics are applied according to the rule. An exact match on the AS and IP network is the most exact rule. An exact match on the AS and a wild card match on the IP network is the 2nd most exact rule. A wild card match on the AS and an exact match on the IP network is the 3rd most exact match. Finally, a total wild card match is the least exact rule.
OBJECT-TYPE    
  ImpEgpRuleEntry  

impEgpRuleAs 1.3.6.1.4.1.33.10.16.1.1.1.1
The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number.
OBJECT-TYPE    
  INTEGER 0..65535  

impEgpRuleNetwork 1.3.6.1.4.1.33.10.16.1.1.1.2
The IP network learned from the neighbor. The value 255.255.255.255 is a wild card matching any network.
OBJECT-TYPE    
  IpAddress  

impEgpRuleAction 1.3.6.1.4.1.33.10.16.1.1.1.3
Control whether the route is learned or discarded.
OBJECT-TYPE    
  INTEGER discard(1), accept(2)  

impEgpRulePreference 1.3.6.1.4.1.33.10.16.1.1.1.4
Preference to be stored with the route. The lower preference is preferred.
OBJECT-TYPE    
  INTEGER 1..255  

impEgpRuleType 1.3.6.1.4.1.33.10.16.1.1.1.5
Type to be stored with the route. The type is based on the OSPF external type and used to help compare metrics. Type 1 is preferred over type 2.
OBJECT-TYPE    
  INTEGER 1..2  

impEgpRuleMetricAction 1.3.6.1.4.1.33.10.16.1.1.1.6
How to apply the impEgpRuleMetric field to the metric learned with the route before storing it in the routing table.
OBJECT-TYPE    
  INTEGER replace(1), increment(2), decrement(3)  

impEgpRuleMetric 1.3.6.1.4.1.33.10.16.1.1.1.7
Metric value to be applied to the metric learned learned with the route before storing it in the routing table.
OBJECT-TYPE    
  INTEGER 0..16777215  

impEgpRuleStatus 1.3.6.1.4.1.33.10.16.1.1.1.8
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

impOspfRuleTable 1.3.6.1.4.1.33.10.16.1.2
The OSPF import table.
OBJECT-TYPE    
  SEQUENCE OF  
    ImpOspfRuleEntry

impOspfRuleEntry 1.3.6.1.4.1.33.10.16.1.2.1
An OSPF import rule. Each rule is keyed by the IP network of the route and the AS from which it was learned. The Ip network and the AS can both be set to a wild card. When an OSPF route is added to the routing table, the most specific import rule is applied to set the preference of the route. An exact match on the Ip network and on the AS is the most exact rule. An exact match on the IP network and a wild card match on the AS is the 2nd most exact rule. A wild card match on both the on the AS and IP network is the next and least exact rule.
OBJECT-TYPE    
  ImpOspfRuleEntry  

impOspfRuleNetwork 1.3.6.1.4.1.33.10.16.1.2.1.1
The IP network of the route. The value 255.255.255.255 is a wild card matching any network.
OBJECT-TYPE    
  IpAddress  

impOspfRulePreference 1.3.6.1.4.1.33.10.16.1.2.1.2
Preference to be stored with the route. The lower preference is preferred.
OBJECT-TYPE    
  INTEGER 1..255  

impOspfRuleStatus 1.3.6.1.4.1.33.10.16.1.2.1.3
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

impRipRuleTable 1.3.6.1.4.1.33.10.16.1.3
The RIP import table.
OBJECT-TYPE    
  SEQUENCE OF  
    ImpRipRuleEntry

impRipRuleEntry 1.3.6.1.4.1.33.10.16.1.3.1
A RIP import rule. Each rule is keyed by the interface and the IP network of the route learned from the neighbor. The route is either accepted or discarded and its metrics are applied according to the rule. An exact match on the IP network is the rule that will be applied. If an exact match does not exist, the rule with the wild card IP network is used.
OBJECT-TYPE    
  ImpRipRuleEntry  

impRipRuleFromIf 1.3.6.1.4.1.33.10.16.1.3.1.1
The interface index of the interface where the rule applies, same as ifIndex.
OBJECT-TYPE    
  IpAddress  

impRipRuleNetwork 1.3.6.1.4.1.33.10.16.1.3.1.2
The IP network learned from the neighbor. The value 255.255.255.255 is a wild card matching any network.
OBJECT-TYPE    
  IpAddress  

impRipRuleAction 1.3.6.1.4.1.33.10.16.1.3.1.3
Control whether the route is learned or discarded.
OBJECT-TYPE    
  INTEGER discard(1), accept(2)  

impRipRulePreference 1.3.6.1.4.1.33.10.16.1.3.1.4
Preference to be stored with the route. The lower preference are preferred.
OBJECT-TYPE    
  INTEGER 0..255  

impRipRuleType 1.3.6.1.4.1.33.10.16.1.3.1.5
Type to be stored with the route. The type is based on the OSPF external type and used to help compare metrics. Type 1 is preferred over type 2.
OBJECT-TYPE    
  INTEGER 1..2  

impRipRuleMetricAction 1.3.6.1.4.1.33.10.16.1.3.1.6
How to apply the impRipRuleMetric field to the metric learned with the route before storing it in the routing table.
OBJECT-TYPE    
  INTEGER replace(1), increment(2), decrement(3)  

impRipRuleMetric 1.3.6.1.4.1.33.10.16.1.3.1.7
Metric value to be applied to the metric learned learned with the route before storing it in the routing table.
OBJECT-TYPE    
  INTEGER 0..16777215  

impRipRuleStatus 1.3.6.1.4.1.33.10.16.1.3.1.8
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

impIsisRuleTable 1.3.6.1.4.1.33.10.16.1.4
The Isis import table.
OBJECT-TYPE    
  SEQUENCE OF  
    ImpIsisRuleEntry

impIsisRuleEntry 1.3.6.1.4.1.33.10.16.1.4.1
An Isis import rule. Each rule is keyed by the IP network of the route learned from the neighbor. The route is either accepted or discarded and its metrics are applied according to the rule. An exact match on the IP network is the rule that will be applied. If an exact match does not exist, the rule with the wild card IP network is used.
OBJECT-TYPE    
  ImpIsisRuleEntry  

impIsisRuleNetwork 1.3.6.1.4.1.33.10.16.1.4.1.1
The IP network learned from the neighbor. The value 255.255.255.255 is a wild card matching any network.
OBJECT-TYPE    
  IpAddress  

impIsisRuleAction 1.3.6.1.4.1.33.10.16.1.4.1.2
Control whether the route is learned or discarded.
OBJECT-TYPE    
  INTEGER discard(1), accept(2)  

impIsisRulePreference 1.3.6.1.4.1.33.10.16.1.4.1.3
Preference to be stored with the route. The lower preference are preferred.
OBJECT-TYPE    
  INTEGER 0..255  

impIsisRuleType 1.3.6.1.4.1.33.10.16.1.4.1.4
Type to be stored with the route. The type is based on the OSPF external type and used to help compare metrics. Type 1 is preferred over type 2.
OBJECT-TYPE    
  INTEGER 1..2  

impIsisRuleMetricAction 1.3.6.1.4.1.33.10.16.1.4.1.5
How to apply the impIsisRuleMetric field to the metric learned with the route before storing it in the routing table.
OBJECT-TYPE    
  INTEGER replace(1), increment(2), decrement(3)  

impIsisRuleMetric 1.3.6.1.4.1.33.10.16.1.4.1.6
Metric value to be applied to the metric learned learned with the route before storing it in the routing table.
OBJECT-TYPE    
  INTEGER  

impIsisRuleStatus 1.3.6.1.4.1.33.10.16.1.4.1.7
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

xExport 1.3.6.1.4.1.33.10.16.2
OBJECT IDENTIFIER    

expEgpToEgpRuleTable 1.3.6.1.4.1.33.10.16.2.1
The EGP to EGP export table.
OBJECT-TYPE    
  SEQUENCE OF  
    ExpEgpToEgpRuleEntry

expEgpToEgpRuleEntry 1.3.6.1.4.1.33.10.16.2.1.1
An EGP to EGP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor, the IP network of the EGP route in the routing table, and the Autonomous System from which the route was learned. The neighbor (to) AS can be set to a wild card as can the IP network and the (from) AS. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: To As IP Network From AS Rank exact exact exact 1st exact exact wild card 2nd exact wild card exact 3rd exact wild card wild card 4th wild card exact exact 5th wild card exact wild card 6th wild card wild card exact 7th wild card wild card wild card 8th
OBJECT-TYPE    
  ExpEgpToEgpRuleEntry  

expEgpToEgpRuleToAs 1.3.6.1.4.1.33.10.16.2.1.1.1
The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number.
OBJECT-TYPE    
  INTEGER 0..65535  

expEgpToEgpRuleNetwork 1.3.6.1.4.1.33.10.16.2.1.1.2
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
OBJECT-TYPE    
  IpAddress  

expEgpToEgpRuleFromAs 1.3.6.1.4.1.33.10.16.2.1.1.3
The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number.
OBJECT-TYPE    
  INTEGER 0..65535  

expEgpToEgpRuleAction 1.3.6.1.4.1.33.10.16.2.1.1.4
Control whether the route is advertised or not.
OBJECT-TYPE    
  INTEGER hide(1), advertise(2)  

expEgpToEgpRuleMetricAction 1.3.6.1.4.1.33.10.16.2.1.1.5
How to apply the expEgpToEgpRuleMetric field to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER replace(1), increment(2), decrement(3)  

expEgpToEgpRuleMetric 1.3.6.1.4.1.33.10.16.2.1.1.6
Metric value to be applied to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER 0..16777215  

expEgpToEgpRuleStatus 1.3.6.1.4.1.33.10.16.2.1.1.7
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

expOspfToEgpRuleTable 1.3.6.1.4.1.33.10.16.2.2
The OSPF to EGP export table.
OBJECT-TYPE    
  SEQUENCE OF  
    ExpOspfToEgpRuleEntry

expOspfToEgpRuleEntry 1.3.6.1.4.1.33.10.16.2.2.1
An OSPF to EGP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor, the IP network of the OSPF route in the routing table, and the Autonomous System from which the route was learned. The neighbor (to) AS can be set to a wild card as can the IP network and the (from) AS. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: To As IP Network From AS Rank exact exact exact 1st exact exact wild card 2nd exact wild card exact 3rd exact wild card wild card 4th wild card exact exact 5th wild card exact wild card 6th wild card wild card exact 7th wild card wild card wild card 8th
OBJECT-TYPE    
  ExpOspfToEgpRuleEntry  

expOspfToEgpRuleToAs 1.3.6.1.4.1.33.10.16.2.2.1.1
The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number.
OBJECT-TYPE    
  INTEGER 0..65535  

expOspfToEgpRuleNetwork 1.3.6.1.4.1.33.10.16.2.2.1.2
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
OBJECT-TYPE    
  IpAddress  

expOspfToEgpRuleFromAs 1.3.6.1.4.1.33.10.16.2.2.1.3
The Autonomous System of the route in the route table. Local indicates that the route was not an external OSPF route. The value 65535 is a wild card matching any AS number, and the value 65534 is for routes within the local AS.
OBJECT-TYPE    
  INTEGER 0..65535  

expOspfToEgpRuleAction 1.3.6.1.4.1.33.10.16.2.2.1.4
Control whether the route is advertised or not.
OBJECT-TYPE    
  INTEGER hide(1), advertise(2)  

expOspfToEgpRuleMetricAction 1.3.6.1.4.1.33.10.16.2.2.1.5
How to apply the expOspfToEgpRuleMetric field to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER replace(1), increment(2), decrement(3)  

expOspfToEgpRuleMetric 1.3.6.1.4.1.33.10.16.2.2.1.6
Metric value to be applied to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER 0..16777215  

expOspfToEgpRuleStatus 1.3.6.1.4.1.33.10.16.2.2.1.7
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

expStaticToEgpRuleTable 1.3.6.1.4.1.33.10.16.2.3
The Static to EGP export table.
OBJECT-TYPE    
  SEQUENCE OF  
    ExpStaticToEgpRuleEntry

expStaticToEgpRuleEntry 1.3.6.1.4.1.33.10.16.2.3.1
An Static to EGP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor and the IP network of the Static route in the routing table. The neighbor (to) AS can be set to a wild card as can the IP network. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: To As IP Network Rank exact exact 1st exact wild card 2nd wild card exact 3rd wild card wild card 4th
OBJECT-TYPE    
  ExpStaticToEgpRuleEntry  

expStaticToEgpRuleToAs 1.3.6.1.4.1.33.10.16.2.3.1.1
The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number.
OBJECT-TYPE    
  INTEGER 0..65535  

expStaticToEgpRuleNetwork 1.3.6.1.4.1.33.10.16.2.3.1.2
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
OBJECT-TYPE    
  IpAddress  

expStaticToEgpRuleAction 1.3.6.1.4.1.33.10.16.2.3.1.3
Control whether the route is advertised or not.
OBJECT-TYPE    
  INTEGER hide(1), advertise(2)  

expStaticToEgpRuleMetricAction 1.3.6.1.4.1.33.10.16.2.3.1.4
How to apply the expStaticToEgpRuleMetric field to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER replace(1), increment(2), decrement(3)  

expStaticToEgpRuleMetric 1.3.6.1.4.1.33.10.16.2.3.1.5
Metric value to be applied to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER 0..16777215  

expStaticToEgpRuleStatus 1.3.6.1.4.1.33.10.16.2.3.1.6
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

expEgpToOspfRuleTable 1.3.6.1.4.1.33.10.16.2.4
The EGP to OSPF export table.
OBJECT-TYPE    
  SEQUENCE OF  
    ExpEgpToOspfRuleEntry

expEgpToOspfRuleEntry 1.3.6.1.4.1.33.10.16.2.4.1
An EGP to OSPF export rule. Each rule is keyed by the IP network of the EGP route in the routing table, and the Autonomous System from which the route was learned. The Ip network can be set to a wild card as can the (from) AS. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network From AS Rank exact exact 1st exact wild card 2nd wild card exact 3rd wild card wild card 4th
OBJECT-TYPE    
  ExpEgpToOspfRuleEntry  

expEgpToOspfRuleNetwork 1.3.6.1.4.1.33.10.16.2.4.1.1
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
OBJECT-TYPE    
  IpAddress  

expEgpToOspfRuleFromAs 1.3.6.1.4.1.33.10.16.2.4.1.2
The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number.
OBJECT-TYPE    
  INTEGER 0..65535  

expEgpToOspfRuleAction 1.3.6.1.4.1.33.10.16.2.4.1.3
Control whether the route is advertised or not.
OBJECT-TYPE    
  INTEGER hide(1), advertise(2)  

expEgpToOspfRuleStatus 1.3.6.1.4.1.33.10.16.2.4.1.4
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

expRipToEgpRuleTable 1.3.6.1.4.1.33.10.16.2.5
The Rip to EGP export table.
OBJECT-TYPE    
  SEQUENCE OF  
    ExpRipToEgpRuleEntry

expRipToEgpRuleEntry 1.3.6.1.4.1.33.10.16.2.5.1
An Rip to EGP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor and the IP network of the Rip route in the routing table. The neighbor (to) AS can be set to a wild card as can the IP network. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: To As IP Network Best Match Rank exact exact 1st exact wild card 2nd wild card exact 3rd wild card wild card 4th
OBJECT-TYPE    
  ExpRipToEgpRuleEntry  

expRipToEgpRuleToAs 1.3.6.1.4.1.33.10.16.2.5.1.1
The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number.
OBJECT-TYPE    
  INTEGER 0..65535  

expRipToEgpRuleNetwork 1.3.6.1.4.1.33.10.16.2.5.1.2
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
OBJECT-TYPE    
  IpAddress  

expRipToEgpRuleAction 1.3.6.1.4.1.33.10.16.2.5.1.3
Control whether the route is advertised or not.
OBJECT-TYPE    
  INTEGER hide(1), advertise(2)  

expRipToEgpRuleMetricAction 1.3.6.1.4.1.33.10.16.2.5.1.4
How to apply the expRipToEgpRuleMetric field to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER replace(1), increment(2), decrement(3)  

expRipToEgpRuleMetric 1.3.6.1.4.1.33.10.16.2.5.1.5
Metric value to be applied to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER 0..16777215  

expRipToEgpRuleStatus 1.3.6.1.4.1.33.10.16.2.5.1.6
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

expRipToOspfRuleTable 1.3.6.1.4.1.33.10.16.2.6
The RIP to OSPF export table.
OBJECT-TYPE    
  SEQUENCE OF  
    ExpRipToOspfRuleEntry

expRipToOspfRuleEntry 1.3.6.1.4.1.33.10.16.2.6.1
A RIP to OSPF export rule. Each rule is keyed by the IP network of the RIP route in the routing table. The IP network can be set to a wild card. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network Best Match Rank exact 1st wild card 2nd
OBJECT-TYPE    
  ExpRipToOspfRuleEntry  

expRipToOspfRuleNetwork 1.3.6.1.4.1.33.10.16.2.6.1.1
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
OBJECT-TYPE    
  IpAddress  

expRipToOspfRuleAction 1.3.6.1.4.1.33.10.16.2.6.1.2
Control whether the route is advertised or not.
OBJECT-TYPE    
  INTEGER hide(1), advertise(2)  

expRipToOspfRuleStatus 1.3.6.1.4.1.33.10.16.2.6.1.3
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

expEgpToRipRuleTable 1.3.6.1.4.1.33.10.16.2.7
The EGP to RIP export table.
OBJECT-TYPE    
  SEQUENCE OF  
    ExpEgpToRipRuleEntry

expEgpToRipRuleEntry 1.3.6.1.4.1.33.10.16.2.7.1
An EGP to RIP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor, the IP network of the EGP route in the routing table, and the Autonomous System from which the route was learned. The IP network can be set to a wild card as can the the from AS. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network From AS Best Match Rank exact exact 1st exact wild card 2nd wild card exact 3rd wild card wild card 4th
OBJECT-TYPE    
  ExpEgpToRipRuleEntry  

expEgpToRipRuleToIf 1.3.6.1.4.1.33.10.16.2.7.1.1
The IP address of the RIP interface to which the rule applies.
OBJECT-TYPE    
  IpAddress  

expEgpToRipRuleNetwork 1.3.6.1.4.1.33.10.16.2.7.1.2
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
OBJECT-TYPE    
  IpAddress  

expEgpToRipRuleFromAs 1.3.6.1.4.1.33.10.16.2.7.1.3
The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number.
OBJECT-TYPE    
  INTEGER 0..65535  

expEgpToRipRuleAction 1.3.6.1.4.1.33.10.16.2.7.1.4
Control whether the route is advertised or not.
OBJECT-TYPE    
  INTEGER hide(1), advertise(2)  

expEgpToRipRuleMetricAction 1.3.6.1.4.1.33.10.16.2.7.1.5
How to apply the expEgpToRipRuleMetric field to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER replace(1), increment(2), decrement(3)  

expEgpToRipRuleMetric 1.3.6.1.4.1.33.10.16.2.7.1.6
Metric value to be applied to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER 0..16777215  

expEgpToRipRuleStatus 1.3.6.1.4.1.33.10.16.2.7.1.7
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

expOspfToRipRuleTable 1.3.6.1.4.1.33.10.16.2.8
The OSPF to RIP export table.
OBJECT-TYPE    
  SEQUENCE OF  
    ExpOspfToRipRuleEntry

expOspfToRipRuleEntry 1.3.6.1.4.1.33.10.16.2.8.1
An Ospf to RIP export rule. Each rule is keyed by the Autonomous System of the Ospf neighbor, the IP network of the Ospf route in the routing table, and the Autonomous System from which the route was learned. The IP network can be set to a wild card as can the the from AS. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network From AS Best Match Rank exact exact 1st exact wild card 2nd wild card exact 3rd wild card wild card 4th
OBJECT-TYPE    
  ExpOspfToRipRuleEntry  

expOspfToRipRuleToIf 1.3.6.1.4.1.33.10.16.2.8.1.1
The IP address of the RIP interface to which the rule applies.
OBJECT-TYPE    
  IpAddress  

expOspfToRipRuleNetwork 1.3.6.1.4.1.33.10.16.2.8.1.2
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
OBJECT-TYPE    
  IpAddress  

expOspfToRipRuleFromAs 1.3.6.1.4.1.33.10.16.2.8.1.3
The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number, and the value 65534 is for routes within the local AS.
OBJECT-TYPE    
  INTEGER 0..65535  

expOspfToRipRuleAction 1.3.6.1.4.1.33.10.16.2.8.1.4
Control whether the route is advertised or not.
OBJECT-TYPE    
  INTEGER hide(1), advertise(2)  

expOspfToRipRuleMetricAction 1.3.6.1.4.1.33.10.16.2.8.1.5
How to apply the expOspfToRipRuleMetric field to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER replace(1), increment(2), decrement(3)  

expOspfToRipRuleMetric 1.3.6.1.4.1.33.10.16.2.8.1.6
Metric value to be applied to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER 0..16777215  

expOspfToRipRuleStatus 1.3.6.1.4.1.33.10.16.2.8.1.7
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. The same is true for the all wild cards where the AS is set to local
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

expRipToRipRuleTable 1.3.6.1.4.1.33.10.16.2.9
The Rip to Rip export table.
OBJECT-TYPE    
  SEQUENCE OF  
    ExpRipToRipRuleEntry

expRipToRipRuleEntry 1.3.6.1.4.1.33.10.16.2.9.1
An Rip to Rip export rule. Each rule is keyed by the IP network of the Rip route in the routing table. The neighbor IP network can be set to a wild card. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network Best Match Rank exact 1st wild card 2nd
OBJECT-TYPE    
  ExpRipToRipRuleEntry  

expRipToRipRuleToIf 1.3.6.1.4.1.33.10.16.2.9.1.1
The IP address of the RIP interface to which the rule applies.
OBJECT-TYPE    
  IpAddress  

expRipToRipRuleNetwork 1.3.6.1.4.1.33.10.16.2.9.1.2
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
OBJECT-TYPE    
  IpAddress  

expRipToRipRuleAction 1.3.6.1.4.1.33.10.16.2.9.1.3
Control whether the route is advertised or not.
OBJECT-TYPE    
  INTEGER hide(1), advertise(2)  

expRipToRipRuleMetricAction 1.3.6.1.4.1.33.10.16.2.9.1.4
How to apply the expRipToRipRuleMetric field to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER replace(1), increment(2), decrement(3)  

expRipToRipRuleMetric 1.3.6.1.4.1.33.10.16.2.9.1.5
Metric value to be applied to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER 0..16777215  

expRipToRipRuleStatus 1.3.6.1.4.1.33.10.16.2.9.1.6
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

expStaticToRipRuleTable 1.3.6.1.4.1.33.10.16.2.10
The Static to Rip export table.
OBJECT-TYPE    
  SEQUENCE OF  
    ExpStaticToRipRuleEntry

expStaticToRipRuleEntry 1.3.6.1.4.1.33.10.16.2.10.1
An Static to Rip export rule. Each rule is keyed by the IP network of the Static route in the routing table. The neighbor IP network can be set to a wild card. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network Best Match Rank exact 1st wild card 2nd
OBJECT-TYPE    
  ExpStaticToRipRuleEntry  

expStaticToRipRuleToIf 1.3.6.1.4.1.33.10.16.2.10.1.1
The IP address of the RIP interface to which the rule applies.
OBJECT-TYPE    
  IpAddress  

expStaticToRipRuleNetwork 1.3.6.1.4.1.33.10.16.2.10.1.2
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
OBJECT-TYPE    
  IpAddress  

expStaticToRipRuleAction 1.3.6.1.4.1.33.10.16.2.10.1.3
Control whether the route is advertised or not.
OBJECT-TYPE    
  INTEGER hide(1), advertise(2)  

expStaticToRipRuleMetricAction 1.3.6.1.4.1.33.10.16.2.10.1.4
How to apply the expStaticToRipRuleMetric field to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER replace(1), increment(2), decrement(3)  

expStaticToRipRuleMetric 1.3.6.1.4.1.33.10.16.2.10.1.5
Metric value to be applied to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER 0..16777215  

expStaticToRipRuleStatus 1.3.6.1.4.1.33.10.16.2.10.1.6
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

expIsisToEgpRuleTable 1.3.6.1.4.1.33.10.16.2.11
The Isis to EGP export table.
OBJECT-TYPE    
  SEQUENCE OF  
    ExpIsisToEgpRuleEntry

expIsisToEgpRuleEntry 1.3.6.1.4.1.33.10.16.2.11.1
An Isis to EGP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor and the IP network of the Isis route in the routing table. The neighbor (to) AS can be set to a wild card as can the IP network. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: To As IP Network Best Match Rank exact exact 1st exact wild card 2nd wild card exact 3rd wild card wild card 4th .
OBJECT-TYPE    
  ExpIsisToEgpRuleEntry  

expIsisToEgpRuleToAs 1.3.6.1.4.1.33.10.16.2.11.1.1
The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number.
OBJECT-TYPE    
  INTEGER 0..65535  

expIsisToEgpRuleNetwork 1.3.6.1.4.1.33.10.16.2.11.1.2
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
OBJECT-TYPE    
  IpAddress  

expIsisToEgpRuleAction 1.3.6.1.4.1.33.10.16.2.11.1.3
Control whether the route is advertised or not.
OBJECT-TYPE    
  INTEGER hide(1), advertise(2)  

expIsisToEgpRuleMetricAction 1.3.6.1.4.1.33.10.16.2.11.1.4
How to apply the expIsisToEgpRuleMetric field to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER replace(1), increment(2), decrement(3)  

expIsisToEgpRuleMetric 1.3.6.1.4.1.33.10.16.2.11.1.5
Metric value to be applied to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER  

expIsisToEgpRuleStatus 1.3.6.1.4.1.33.10.16.2.11.1.6
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

expIsisToOspfRuleTable 1.3.6.1.4.1.33.10.16.2.12
The Isis to Ospf export table.
OBJECT-TYPE    
  SEQUENCE OF  
    ExpIsisToOspfRuleEntry

expIsisToOspfRuleEntry 1.3.6.1.4.1.33.10.16.2.12.1
An Isis to Ospf export rule. Each rule is keyed by the IP network of the Isis route in the routing table. The IP network can be set to a wild card. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network Best Match Rank exact 1st wild card 2nd .
OBJECT-TYPE    
  ExpIsisToOspfRuleEntry  

expIsisToOspfRuleNetwork 1.3.6.1.4.1.33.10.16.2.12.1.1
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
OBJECT-TYPE    
  IpAddress  

expIsisToOspfRuleAction 1.3.6.1.4.1.33.10.16.2.12.1.2
Control whether the route is advertised or not.
OBJECT-TYPE    
  INTEGER hide(1), advertise(2)  

expIsisToOspfRuleStatus 1.3.6.1.4.1.33.10.16.2.12.1.3
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

expIsisToRipRuleTable 1.3.6.1.4.1.33.10.16.2.13
The Isis to Rip export table.
OBJECT-TYPE    
  SEQUENCE OF  
    ExpIsisToRipRuleEntry

expIsisToRipRuleEntry 1.3.6.1.4.1.33.10.16.2.13.1
An Isis to Rip export rule. Each rule is keyed by the IP network of the Isis route in the routing table. The IP network can be set to a wild card. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network Best Match Rank exact 1st wild card 2nd .
OBJECT-TYPE    
  ExpIsisToRipRuleEntry  

expIsisToRipRuleToIf 1.3.6.1.4.1.33.10.16.2.13.1.1
The IP address of the RIP interface to which the rule applies.
OBJECT-TYPE    
  IpAddress  

expIsisToRipRuleNetwork 1.3.6.1.4.1.33.10.16.2.13.1.2
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
OBJECT-TYPE    
  IpAddress  

expIsisToRipRuleAction 1.3.6.1.4.1.33.10.16.2.13.1.3
Control whether the route is advertised or not.
OBJECT-TYPE    
  INTEGER hide(1), advertise(2)  

expIsisToRipRuleMetricAction 1.3.6.1.4.1.33.10.16.2.13.1.4
How to apply the expIsisToRipRuleMetric field to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER replace(1), increment(2), decrement(3)  

expIsisToRipRuleMetric 1.3.6.1.4.1.33.10.16.2.13.1.5
Metric value to be applied to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER  

expIsisToRipRuleStatus 1.3.6.1.4.1.33.10.16.2.13.1.6
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

expEgpToIsisRuleTable 1.3.6.1.4.1.33.10.16.2.14
The EGP to Isis export table.
OBJECT-TYPE    
  SEQUENCE OF  
    ExpEgpToIsisRuleEntry

expEgpToIsisRuleEntry 1.3.6.1.4.1.33.10.16.2.14.1
An EGP to Isis export rule. Each rule is keyed by the Autonomous System of the EGP neighbor, the IP network of the EGP route in the routing table, and the Autonomous System from which the route was learned. The IP network can be set to a wild card as can the from AS. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network From AS Best Match Rank exact exact 1st exact wild card 2nd wild card exact 3rd wild card wild card 4th .
OBJECT-TYPE    
  ExpEgpToIsisRuleEntry  

expEgpToIsisRuleNetwork 1.3.6.1.4.1.33.10.16.2.14.1.1
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
OBJECT-TYPE    
  IpAddress  

expEgpToIsisRuleFromAs 1.3.6.1.4.1.33.10.16.2.14.1.2
The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number.
OBJECT-TYPE    
  INTEGER 0..65535  

expEgpToIsisRuleAction 1.3.6.1.4.1.33.10.16.2.14.1.3
Control whether the route is advertised or not.
OBJECT-TYPE    
  INTEGER hide(1), advertise(2)  

expEgpToIsisRuleMetricType 1.3.6.1.4.1.33.10.16.2.14.1.4
Whether to advertise the metric as Internal or External.
OBJECT-TYPE    
  INTEGER internal(1), external(2)  

expEgpToIsisRuleDefaultMetricAction 1.3.6.1.4.1.33.10.16.2.14.1.5
How to apply the expEgpToIsisDefaultRuleMetric field to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER replace(1), increment(2), decrement(3)  

expEgpToIsisRuleDefaultMetric 1.3.6.1.4.1.33.10.16.2.14.1.6
Default metric value to be applied to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER  

expEgpToIsisRuleDelayMetricAction 1.3.6.1.4.1.33.10.16.2.14.1.7
How to apply the expEgpToIsisDelayRuleMetric field to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER replace(1), increment(2), decrement(3)  

expEgpToIsisRuleDelayMetric 1.3.6.1.4.1.33.10.16.2.14.1.8
Delay metric value to be applied to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER  

expEgpToIsisRuleErrorMetricAction 1.3.6.1.4.1.33.10.16.2.14.1.9
How to apply the expEgpToIsisErrorRuleMetric field to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER replace(1), increment(2), decrement(3)  

expEgpToIsisRuleErrorMetric 1.3.6.1.4.1.33.10.16.2.14.1.10
Error metric value to be applied to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER  

expEgpToIsisRuleExpenseMetricAction 1.3.6.1.4.1.33.10.16.2.14.1.11
How to apply the expEgpToIsisExpenseRuleMetric field to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER replace(1), increment(2), decrement(3)  

expEgpToIsisRuleExpenseMetric 1.3.6.1.4.1.33.10.16.2.14.1.12
Expense metric value to be applied to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER  

expEgpToIsisRuleStatus 1.3.6.1.4.1.33.10.16.2.14.1.13
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

expOspfToIsisRuleTable 1.3.6.1.4.1.33.10.16.2.15
The Ospf to Isis export table.
OBJECT-TYPE    
  SEQUENCE OF  
    ExpOspfToIsisRuleEntry

expOspfToIsisRuleEntry 1.3.6.1.4.1.33.10.16.2.15.1
An Ospf to Isis export rule. Each rule is keyed by the Autonomous System of the Ospf neighbor, the IP network of the Ospf route in the routing table, and the Autonomous System from which the route was learned. The IP network can be set to a wild card as can the the from AS. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network From AS Best Match Rank exact exact 1st exact wild card 2nd wild card exact 3rd wild card wild card 4th .
OBJECT-TYPE    
  ExpOspfToIsisRuleEntry  

expOspfToIsisRuleNetwork 1.3.6.1.4.1.33.10.16.2.15.1.1
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
OBJECT-TYPE    
  IpAddress  

expOspfToIsisRuleFromAs 1.3.6.1.4.1.33.10.16.2.15.1.2
The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number, and the value 65534 is for routes within the local AS.
OBJECT-TYPE    
  INTEGER 0..65535  

expOspfToIsisRuleAction 1.3.6.1.4.1.33.10.16.2.15.1.3
Control whether the route is advertised or not.
OBJECT-TYPE    
  INTEGER hide(1), advertise(2)  

expOspfToIsisRuleMetricType 1.3.6.1.4.1.33.10.16.2.15.1.4
Whether to advertise the metric as Internal or External.
OBJECT-TYPE    
  INTEGER internal(1), external(2)  

expOspfToIsisRuleDefaultMetricAction 1.3.6.1.4.1.33.10.16.2.15.1.5
How to apply the expOspfToIsisDefaultRuleMetric field to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER replace(1), increment(2), decrement(3)  

expOspfToIsisRuleDefaultMetric 1.3.6.1.4.1.33.10.16.2.15.1.6
Default metric value to be applied to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER  

expOspfToIsisRuleDelayMetricAction 1.3.6.1.4.1.33.10.16.2.15.1.7
How to apply the expOspfToIsisDelayRuleMetric field to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER replace(1), increment(2), decrement(3)  

expOspfToIsisRuleDelayMetric 1.3.6.1.4.1.33.10.16.2.15.1.8
Delay metric value to be applied to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER  

expOspfToIsisRuleErrorMetricAction 1.3.6.1.4.1.33.10.16.2.15.1.9
How to apply the expOspfToIsisErrorRuleMetric field to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER replace(1), increment(2), decrement(3)  

expOspfToIsisRuleErrorMetric 1.3.6.1.4.1.33.10.16.2.15.1.10
Error metric value to be applied to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER  

expOspfToIsisRuleExpenseMetricAction 1.3.6.1.4.1.33.10.16.2.15.1.11
How to apply the expOspfToIsisExpenseRuleMetric field to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER replace(1), increment(2), decrement(3)  

expOspfToIsisRuleExpenseMetric 1.3.6.1.4.1.33.10.16.2.15.1.12
Expense metric value to be applied to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER  

expOspfToIsisRuleStatus 1.3.6.1.4.1.33.10.16.2.15.1.13
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. The same is true for the all wild cards where the AS is set to local
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

expRipToIsisRuleTable 1.3.6.1.4.1.33.10.16.2.16
The Isis to Isis export table.
OBJECT-TYPE    
  SEQUENCE OF  
    ExpRipToIsisRuleEntry

expRipToIsisRuleEntry 1.3.6.1.4.1.33.10.16.2.16.1
An Isis to Isis export rule. Each rule is keyed by the IP network of the Isis route in the routing table. The neighbor IP network can be set to a wild card. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network Best Match Rank exact 1st wild card 2nd .
OBJECT-TYPE    
  ExpRipToIsisRuleEntry  

expRipToIsisRuleNetwork 1.3.6.1.4.1.33.10.16.2.16.1.1
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
OBJECT-TYPE    
  IpAddress  

expRipToIsisRuleAction 1.3.6.1.4.1.33.10.16.2.16.1.2
Control whether the route is advertised or not.
OBJECT-TYPE    
  INTEGER hide(1), advertise(2)  

expRipToIsisRuleMetricType 1.3.6.1.4.1.33.10.16.2.16.1.3
Whether to advertise the metric as Internal or External.
OBJECT-TYPE    
  INTEGER internal(1), external(2)  

expRipToIsisRuleDefaultMetricAction 1.3.6.1.4.1.33.10.16.2.16.1.4
How to apply the expRipToIsisDefaultRuleMetric field to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER replace(1), increment(2), decrement(3)  

expRipToIsisRuleDefaultMetric 1.3.6.1.4.1.33.10.16.2.16.1.5
Default metric value to be applied to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER  

expRipToIsisRuleDelayMetricAction 1.3.6.1.4.1.33.10.16.2.16.1.6
How to apply the expRipToIsisDelayRuleMetric field to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER replace(1), increment(2), decrement(3)  

expRipToIsisRuleDelayMetric 1.3.6.1.4.1.33.10.16.2.16.1.7
Delay metric value to be applied to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER  

expRipToIsisRuleErrorMetricAction 1.3.6.1.4.1.33.10.16.2.16.1.8
How to apply the expRipToIsisErrorRuleMetric field to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER replace(1), increment(2), decrement(3)  

expRipToIsisRuleErrorMetric 1.3.6.1.4.1.33.10.16.2.16.1.9
Error metric value to be applied to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER  

expRipToIsisRuleExpenseMetricAction 1.3.6.1.4.1.33.10.16.2.16.1.10
How to apply the expRipToIsisExpenseRuleMetric field to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER replace(1), increment(2), decrement(3)  

expRipToIsisRuleExpenseMetric 1.3.6.1.4.1.33.10.16.2.16.1.11
Expense metric value to be applied to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER  

expRipToIsisRuleStatus 1.3.6.1.4.1.33.10.16.2.16.1.12
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

expStaticToIsisRuleTable 1.3.6.1.4.1.33.10.16.2.17
The Static to Isis export table.
OBJECT-TYPE    
  SEQUENCE OF  
    ExpStaticToIsisRuleEntry

expStaticToIsisRuleEntry 1.3.6.1.4.1.33.10.16.2.17.1
An Static to Isis export rule. Each rule is keyed by the IP network of the Static route in the routing table. The neighbor IP network can be set to a wild card. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network Best Match Rank exact 1st wild card 2nd .
OBJECT-TYPE    
  ExpStaticToIsisRuleEntry  

expStaticToIsisRuleNetwork 1.3.6.1.4.1.33.10.16.2.17.1.1
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
OBJECT-TYPE    
  IpAddress  

expStaticToIsisRuleAction 1.3.6.1.4.1.33.10.16.2.17.1.2
Control whether the route is advertised or not.
OBJECT-TYPE    
  INTEGER hide(1), advertise(2)  

expStaticToIsisRuleMetricType 1.3.6.1.4.1.33.10.16.2.17.1.3
Whether to advertise the metric as Internal or External.
OBJECT-TYPE    
  INTEGER internal(1), external(2)  

expStaticToIsisRuleDefaultMetricAction 1.3.6.1.4.1.33.10.16.2.17.1.4
How to apply the expStaticToIsisDefaultRuleMetric field to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER replace(1), increment(2), decrement(3)  

expStaticToIsisRuleDefaultMetric 1.3.6.1.4.1.33.10.16.2.17.1.5
Default metric value to be applied to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER  

expStaticToIsisRuleDelayMetricAction 1.3.6.1.4.1.33.10.16.2.17.1.6
How to apply the expStaticToIsisDelayRuleMetric field to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER replace(1), increment(2), decrement(3)  

expStaticToIsisRuleDelayMetric 1.3.6.1.4.1.33.10.16.2.17.1.7
Delay metric value to be applied to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER  

expStaticToIsisRuleErrorMetricAction 1.3.6.1.4.1.33.10.16.2.17.1.8
How to apply the expStaticToIsisErrorRuleMetric field to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER replace(1), increment(2), decrement(3)  

expStaticToIsisRuleErrorMetric 1.3.6.1.4.1.33.10.16.2.17.1.9
Error metric value to be applied to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER  

expStaticToIsisRuleExpenseMetricAction 1.3.6.1.4.1.33.10.16.2.17.1.10
How to apply the expStaticToIsisExpenseRuleMetric field to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER replace(1), increment(2), decrement(3)  

expStaticToIsisRuleExpenseMetric 1.3.6.1.4.1.33.10.16.2.17.1.11
Expense metric value to be applied to the metric in the route table entry before the route is advertised.
OBJECT-TYPE    
  INTEGER  

expStaticToIsisRuleStatus 1.3.6.1.4.1.33.10.16.2.17.1.12
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

xFilter 1.3.6.1.4.1.33.10.16.3
OBJECT IDENTIFIER    

ipIfFilterTable 1.3.6.1.4.1.33.10.16.3.1
Table of filter entries.
OBJECT-TYPE    
  SEQUENCE OF  
    IpIfFilterEntry

ipIfFilterEntry 1.3.6.1.4.1.33.10.16.3.1.1
A particular entry.
OBJECT-TYPE    
  IpIfFilterEntry  

ipIfFilterIndex 1.3.6.1.4.1.33.10.16.3.1.1.1
The interface index with which this entry is associated. This value is the same as IfIndex.
OBJECT-TYPE    
  INTEGER  

ipIfFilterDstAddr 1.3.6.1.4.1.33.10.16.3.1.1.2
The destination IP address to use in the filter match.
OBJECT-TYPE    
  IpAddress  

ipIfFilterDstMask 1.3.6.1.4.1.33.10.16.3.1.1.3
The destination IP mask to use in the filter match.
OBJECT-TYPE    
  IpAddress  

ipIfFilterSrcAddr 1.3.6.1.4.1.33.10.16.3.1.1.4
The source IP address to use in the filter match.
OBJECT-TYPE    
  IpAddress  

ipIfFilterSrcMask 1.3.6.1.4.1.33.10.16.3.1.1.5
The source IP mask to use in the filter match.
OBJECT-TYPE    
  IpAddress  

ipIfFilterProtocol 1.3.6.1.4.1.33.10.16.3.1.1.6
The protocol to use in the filter match. The value 256 indicates any protocol.
OBJECT-TYPE    
  INTEGER 0..256  

ipIfFilterDstPort 1.3.6.1.4.1.33.10.16.3.1.1.7
The destination port to use in the filter match. This field only applies to TCP and UDP protocol packets. The value 65536 indicates any destination port.
OBJECT-TYPE    
  INTEGER 0..65536  

ipIfFilterSrcPort 1.3.6.1.4.1.33.10.16.3.1.1.8
The source port to use in the filter match. This field only applies to TCP and UDP protocol packets. The value 65536 indicates any source port.
OBJECT-TYPE    
  INTEGER 0..65536  

ipIfFilterAction 1.3.6.1.4.1.33.10.16.3.1.1.9
Control whether the packet for which this filter is the best match should be forwarded or discarded.
OBJECT-TYPE    
  INTEGER discard(1), forward(2)  

ipIfFilterStatus 1.3.6.1.4.1.33.10.16.3.1.1.10
The status of the filter entry. Set to 'invalid' to remove the entry.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

ipFilterState 1.3.6.1.4.1.33.10.16.3.2
The indication of whether this system does IP filtering.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

ipIfFilter2Table 1.3.6.1.4.1.33.10.16.3.3
Table of filter entries.
OBJECT-TYPE    
  SEQUENCE OF  
    IpIfFilter2Entry

ipIfFilter2Entry 1.3.6.1.4.1.33.10.16.3.3.1
A particular entry.
OBJECT-TYPE    
  IpIfFilter2Entry  

ipIfFilter2Index 1.3.6.1.4.1.33.10.16.3.3.1.1
The interface index with which this entry is associated. This value is the same as IfIndex.
OBJECT-TYPE    
  INTEGER  

ipIfFilter2DstAddr 1.3.6.1.4.1.33.10.16.3.3.1.2
The destination IP address to use in the filter match.
OBJECT-TYPE    
  IpAddress  

ipIfFilter2DstMask 1.3.6.1.4.1.33.10.16.3.3.1.3
The destination IP mask to use in the filter match.
OBJECT-TYPE    
  IpAddress  

ipIfFilter2SrcAddr 1.3.6.1.4.1.33.10.16.3.3.1.4
The source IP address to use in the filter match.
OBJECT-TYPE    
  IpAddress  

ipIfFilter2SrcMask 1.3.6.1.4.1.33.10.16.3.3.1.5
The source IP mask to use in the filter match.
OBJECT-TYPE    
  IpAddress  

ipIfFilter2Protocol 1.3.6.1.4.1.33.10.16.3.3.1.6
The protocol to use in the filter match. The value 256 indicates any protocol.
OBJECT-TYPE    
  INTEGER 0..256  

ipIfFilter2DstPortStart 1.3.6.1.4.1.33.10.16.3.3.1.7
The starting destination port in a range of destination ports to use in the filter match. This field only applies to TCP and UDP protocol packets.
OBJECT-TYPE    
  INTEGER 0..65535  

ipIfFilter2SrcPortStart 1.3.6.1.4.1.33.10.16.3.3.1.8
The starting source port in a range of source ports to use in the filter match. This field only applies to TCP and UDP protocol packets.
OBJECT-TYPE    
  INTEGER 0..65535  

ipIfFilter2Action 1.3.6.1.4.1.33.10.16.3.3.1.9
Control whether the packet for which this filter is the best match should be forwarded or discarded.
OBJECT-TYPE    
  INTEGER discard(1), forward(2)  

ipIfFilter2Status 1.3.6.1.4.1.33.10.16.3.3.1.10
The status of the filter entry. Set to 'invalid' to remove the entry.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

ipIfFilter2DstPortEnd 1.3.6.1.4.1.33.10.16.3.3.1.11
The ending destination port in a range of destination ports to use in the filter match. This field only applies to TCP and UDP protocol packets. This filed must also be greater or equal to the ipIfFilter2DstPortStart field.
OBJECT-TYPE    
  INTEGER 0..65535  

ipIfFilter2SrcPortEnd 1.3.6.1.4.1.33.10.16.3.3.1.12
The starting source port in a range of source ports to use in the filter match. This field only applies to TCP and UDP protocol packets. This filed must also be greater or equal to the ipIfFilter2SrcPortStart field.
OBJECT-TYPE    
  INTEGER 0..65535  

ipIfFilter2TcpSyn 1.3.6.1.4.1.33.10.16.3.3.1.13
The value of the TCP SYN and ACK bit to ues in the filter match. This field only applies to TCP packets. On indicates that the SYN bit is on and the ACK bit is off. Off is any other combination.
OBJECT-TYPE    
  INTEGER off(1), on(2), all(3)  

ipIfFilter2ProtocolPriority 1.3.6.1.4.1.33.10.16.3.3.1.14
Control the priority at which the packet for which this filter is the best match should be placed on the WAN output queue. None indicates that the sending interfaces protocol priority should be used.
OBJECT-TYPE    
  INTEGER low(1), medium(3), high(5), none(256)  

xRip 1.3.6.1.4.1.33.10.18
OBJECT IDENTIFIER    

ripState 1.3.6.1.4.1.33.10.18.1
The indication of whether this system participates in RIP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

ripStatus 1.3.6.1.4.1.33.10.18.2
The status of the RIP software.
OBJECT-TYPE    
  INTEGER active(1), ripDisabled(2), ipDisabled(3), noNetworksEnabled(4), noMemory(5)  

ripNetTable 1.3.6.1.4.1.33.10.18.3
Table of RIP entries.
OBJECT-TYPE    
  SEQUENCE OF  
    RipNetEntry

ripNetEntry 1.3.6.1.4.1.33.10.18.3.1
A particular entry.
OBJECT-TYPE    
  RipNetEntry  

ripNetNet 1.3.6.1.4.1.33.10.18.3.1.1
The IP Network to which this entry applies.
OBJECT-TYPE    
  IpAddress  

ripNetState 1.3.6.1.4.1.33.10.18.3.1.2
This value controls the RIP protocol on this network.
OBJECT-TYPE    
  INTEGER disabled(1), routerDiscovery(2), full(3)  

ripNetRipsIn 1.3.6.1.4.1.33.10.18.3.1.3
The number of RIP packets received from routers on this IP network.
OBJECT-TYPE    
  Counter  

ripNetRipsOut 1.3.6.1.4.1.33.10.18.3.1.4
The number of RIP packets sent to routers on this IP network.
OBJECT-TYPE    
  Counter  

ripNetAlgorithm 1.3.6.1.4.1.33.10.18.3.1.5
This value controls the RIP algorithm on this network.
OBJECT-TYPE    
  INTEGER poisonedReverse(1), splitHorizon(2)  

xlpd 1.3.6.1.4.1.33.10.19
OBJECT IDENTIFIER    

lpdQueueTable 1.3.6.1.4.1.33.10.19.1
A list of lpd queues on the server.
OBJECT-TYPE    
  SEQUENCE OF  
    LpdQueueEntry

lpdQueueEntry 1.3.6.1.4.1.33.10.19.1.1
Lpd parameter values plus counters for an individual lpd queue.
OBJECT-TYPE    
  LpdQueueEntry  

lpdQueueStatus 1.3.6.1.4.1.33.10.19.1.1.1
Status of this entry. Setting the value to 'invalid' invalidates the entry, corresponding directly to the CLEAR/PURGE SERVER LPD QUEUE command. Setting the value to 'valid' validates (creates) the entry, corresonding directly to the DEF/SET SERVER LPD QUEUE and lpd create commands.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

lpdQueueName 1.3.6.1.4.1.33.10.19.1.1.2
Name of the LPD queue, case sensitive.
OBJECT-TYPE    
  DisplayString SIZE(1..16)  

lpdQueuePorts 1.3.6.1.4.1.33.10.19.1.1.3
List of ports assigned to the queue. An lpd queue can be associated with more than 1 port. This object corresponds to the port-list in the DEF/SET SERVER LPD QUEUE and lpc/create commands. The OCTET STRING contains a bitmap, with one bit for each port, and enough octets for all the ports on the system. Port numbers are as defined for charPortIndex in the Character MIB [11]. Corresponding bit numbers start with 1 as the high-order bit of the first octet.
OBJECT-TYPE    
  OCTET STRING SIZE(16)  

lpdQueueEnabled 1.3.6.1.4.1.33.10.19.1.1.4
Flag indicates if the queue is enabled. A 'disabled' queue will reject print requests from remote systems. A 'enabled' queue accepts requests for printing.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

lpdQueueLfConversion 1.3.6.1.4.1.33.10.19.1.1.5
Flag indicates if the queue is converting linefeeds to linefeeds, carriagereturns. 'lfcr' does the converion, 'lf' does not.
OBJECT-TYPE    
  INTEGER lf(1), lfcr(2)  

lpdQueueTotalJobs 1.3.6.1.4.1.33.10.19.1.1.6
The total number of jobs on the queue. This number should be equal to the number of active and waiting jobs. (lpdQueueActive + lpdQueueWaiting)
OBJECT-TYPE    
  Gauge  

lpdQueueActiveJobs 1.3.6.1.4.1.33.10.19.1.1.7
The number of active jobs on the queue. An active job is a job that has been assigned a port is in the process of receiving data from a remote host and sending it out the port.
OBJECT-TYPE    
  Gauge  

lpdQueueWaitingJobs 1.3.6.1.4.1.33.10.19.1.1.8
The number of waiting jobs on the queue. A waiting job is a job that needs a port to send its data to. This implies that the ports associated with this queue are busy.
OBJECT-TYPE    
  Gauge  

lpdQueueProcessedJobs 1.3.6.1.4.1.33.10.19.1.1.9
The total number of jobs processed by this queue since server boot.
OBJECT-TYPE    
  Counter  

lpdQueueFormFeed 1.3.6.1.4.1.33.10.19.1.1.10
A control to determine how we will send out a formfeed when printing a lpd job. formfeedafter: Send after job, formfeedbefore: Send before job, formfeednone: Send no formfeed.
OBJECT-TYPE    
  INTEGER formfeedafter(1), formfeedbefore(2), formfeednone(3)  

lpdQueueBypass 1.3.6.1.4.1.33.10.19.1.1.11
Control for a queue to bypass a LPD port which has output inhibited via flow control. Corresponds directly to the value labeled 'Bypass' in the SERVER LPD QUEUE display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

lpdJobTable 1.3.6.1.4.1.33.10.19.2
A list of lpd jobs.
OBJECT-TYPE    
  SEQUENCE OF  
    LpdJobEntry

lpdJobEntry 1.3.6.1.4.1.33.10.19.2.1
A single lpd Job.
OBJECT-TYPE    
  LpdJobEntry  

lpdJobStatus 1.3.6.1.4.1.33.10.19.2.1.1
Status of this entry. Setting this object to 'invalid' will remove the job from the queue. Setting this object ot 'valid' has no effect since the only way to create an lpd job is with the lpd protocol.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

lpdJobNumber 1.3.6.1.4.1.33.10.19.2.1.2
The queue relative job number for this lpd job. Job numbers are assigned as jobs are accepted onto the queue. Job numbers are reset to 1 when they reach a value greater than 1000 and the queue goes empty.
OBJECT-TYPE    
  INTEGER 1..5000  

lpdJobAssignedPort 1.3.6.1.4.1.33.10.19.2.1.3
The number of the port assigned to the lpd job.
OBJECT-TYPE    
  INTEGER 0..256  

lpdJobFileSize 1.3.6.1.4.1.33.10.19.2.1.4
The size of the file being sent from the remote system.
OBJECT-TYPE    
  INTEGER 0..2147483647  

lpdJobHostName 1.3.6.1.4.1.33.10.19.2.1.5
The name of the host sending the job.
OBJECT-TYPE    
  DisplayString SIZE(1..34)  

lpdJobFileName 1.3.6.1.4.1.33.10.19.2.1.6
The name of the file being sent.
OBJECT-TYPE    
  DisplayString SIZE(1..34)  

lpdJobState 1.3.6.1.4.1.33.10.19.2.1.7
The current state of the lpd job. A typical job transistions through the following states: initialize->waiting->assigned->printingdata-> printingcontrol->completed.
OBJECT-TYPE    
  INTEGER initialized(1), waiting(2), assigned(3), printingData(4), printingControl(5), aborted(6), completed(7), error(8), flushing(9)  

xSecurID 1.3.6.1.4.1.33.10.20
OBJECT IDENTIFIER    

securIDServerName0 1.3.6.1.4.1.33.10.20.1
The Domain name of the first SecurID server to try when the system verifies a SecurID PASSCODE. Corresponds directly to SERVER SECURID SERVER0 and the value labeled 'SecurID Server0:' in the SERVER SECURID display.
OBJECT-TYPE    
  DisplayString SIZE(0..50)  

securIDServerName1 1.3.6.1.4.1.33.10.20.2
The Domain name of the second SecurID server to try when the system verifies a SecurID PASSCODE. Corresponds directly to SERVER SECURID SERVER1 and the value labeled 'SecurID Server1:' in the SERVER SECURID display.
OBJECT-TYPE    
  DisplayString SIZE(0..50)  

securIDServerName2 1.3.6.1.4.1.33.10.20.3
The Domain name of the third SecurID server to try when the system verifies a SecurID PASSCODE. Corresponds directly to SERVER SECURID SERVER2 and the value labeled 'SecurID Server2:' in the SERVER SECURID display.
OBJECT-TYPE    
  DisplayString SIZE(0..50)  

securIDServerName3 1.3.6.1.4.1.33.10.20.4
The Domain name of the fourth SecurID server to try when the system verifies a SecurID PASSCODE. Corresponds directly to SERVER SECURID SERVER3 and the value labeled 'SecurID Server3:' in the SERVER SECURID display.
OBJECT-TYPE    
  DisplayString SIZE(0..50)  

securIDServerName4 1.3.6.1.4.1.33.10.20.5
The Domain name of the fifth SecurID server to try when the system verifies a SecurID PASSCODE. Corresponds directly to SERVER SECURID SERVER4 and the value labeled 'SecurID Server4:' in the SERVER SECURID display.
OBJECT-TYPE    
  DisplayString SIZE(0..50)  

securIDMaxRetries 1.3.6.1.4.1.33.10.20.6
The maximum number of times the server will try any single SecurID server to validate a PASSCODE. Corresponds directly to SERVER SECURID ACMMAXRETRIES and the value labeled 'SecurID ACMMAXRETRIES:' in the SERVER SECURID display.
OBJECT-TYPE    
  INTEGER 1..10  

securIDBaseTimeout 1.3.6.1.4.1.33.10.20.7
The initial timeout value to be used between prompts for a SecurID PASSCODE. Corresponds directly to SERVER SECURID ACMBASETIMEOUT and the value labeled 'SecurID ACMBASETIMEOUT:' in the SERVER SECURID display.
OBJECT-TYPE    
  INTEGER 1..10  

securIDPort 1.3.6.1.4.1.33.10.20.8
The UDP port number to be used when communicating with the SecurID servers. Corresponds directly to SERVER SECURID ACM_PORT and the value labeled 'SecurID ACM_PORT:' in the SERVER SECURID display.
OBJECT-TYPE    
  INTEGER 1..32767  

securIDQueryLimit 1.3.6.1.4.1.33.10.20.9
The maximum number of times a user will be queried for a SecurID PASSCODE before being logged out. Corresponds directly to SERVER SECURID QUERY LIMIT and the value labeled 'SecurID Query Limit:' in the SERVER SECURID display.
OBJECT-TYPE    
  INTEGER 1..10  

securIDEncryptionMode 1.3.6.1.4.1.33.10.20.10
The type of encryption to use in SecurID validation. Corresponds directly to the value labeled 'Encryption Mode' in the SERVER SECURID display.
OBJECT-TYPE    
  INTEGER sdiBlockCipher(1), des(2)  

securIDInsecureLogins 1.3.6.1.4.1.33.10.20.11
The number of user logins on ports for which SecurID user verification is not enabled. Corresponds directly to the value labeled 'Logins without SecurID:' in the SERVER SECURID display.
OBJECT-TYPE    
  Counter  

securIDSecureLogins 1.3.6.1.4.1.33.10.20.12
The number of successful user logins on ports for which SecurID user verification is enabled. Corresponds directly to the value labeled 'Successful Logins:' in the SERVER SECURID display.
OBJECT-TYPE    
  Counter  

securIDSecureLoginsFailed 1.3.6.1.4.1.33.10.20.13
The number of verification failures due to incorrect PASSCODE for attempted user logins on ports for which SecurID user verification is enabled. Corresponds directly to the value labeled 'Unsuccessful Logins:' in the SERVER SECURID display.
OBJECT-TYPE    
  Counter  

securIDServerAccess0 1.3.6.1.4.1.33.10.20.14
The number of times the system successfully accessed the SecurID server0. Corresponds directly to the value labeled 'Attempts to access:', 'Server0', and 'Successful:' in the SERVER SECURID display.
OBJECT-TYPE    
  Counter  

securIDServerAccessFailed0 1.3.6.1.4.1.33.10.20.15
The number of times the system unsuccessfully accessed the SecurID server0. Corresponds directly to the value labeled 'Attempts to access:', 'Server0', and 'UnSuccessful:' in the SERVER SECURID display.
OBJECT-TYPE    
  Counter  

securIDServerAccess1 1.3.6.1.4.1.33.10.20.16
The number of times the system successfully accessed the SecurID server1. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', and 'Successful:' in the SERVER SECURID display.
OBJECT-TYPE    
  Counter  

securIDServerAccessFailed1 1.3.6.1.4.1.33.10.20.17
The number of times the system unsuccessfully accessed the SecurID server1. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', and 'UnSuccessful:' in the SERVER SECURID display.
OBJECT-TYPE    
  Counter  

securIDServerAccess2 1.3.6.1.4.1.33.10.20.18
The number of times the system successfully accessed the SecurID server2. Corresponds directly to the value labeled 'Attempts to access:', 'Server2', and 'Successful:' in the SERVER SECURID display.
OBJECT-TYPE    
  Counter  

securIDServerAccessFailed2 1.3.6.1.4.1.33.10.20.19
The number of times the system unsuccessfully accessed the SecurID server2. Corresponds directly to the value labeled 'Attempts to access:', 'Server2', and 'UnSuccessful:' in the SERVER SECURID display.
OBJECT-TYPE    
  Counter  

securIDServerAccess3 1.3.6.1.4.1.33.10.20.20
The number of times the system successfully accessed the SecurID server3. Corresponds directly to the value labeled 'Attempts to access:', 'Server3', and 'Successful:' in the SERVER SECURID display.
OBJECT-TYPE    
  Counter  

securIDServerAccessFailed3 1.3.6.1.4.1.33.10.20.21
The number of times the system unsuccessfully accessed the SecurID server3. Corresponds directly to the value labeled 'Attempts to access:', 'Server3', and 'UnSuccessful:' in the SERVER SECURID display.
OBJECT-TYPE    
  Counter  

securIDServerAccess4 1.3.6.1.4.1.33.10.20.22
The number of times the system successfully accessed the SecurID server4. Corresponds directly to the value labeled 'Attempts to access:', 'Server4', and 'Successful:' in the SERVER SECURID display.
OBJECT-TYPE    
  Counter  

securIDServerAccessFailed4 1.3.6.1.4.1.33.10.20.23
The number of times the system unsuccessfully accessed the SecurID server4. Corresponds directly to the value labeled 'Attempts to access:', 'Server4', and 'UnSuccessful:' in the SERVER SECURID display.
OBJECT-TYPE    
  Counter  

securIDErrorPortIndex 1.3.6.1.4.1.33.10.20.24
The index of the most recent port on which a SecurID access violation occurred. Corresponds directly to the value labeled 'Last Unsuccessful Login:' in the SERVER SECURID display.
OBJECT-TYPE    
  INTEGER 0..40  

securIDError 1.3.6.1.4.1.33.10.20.25
The error number of the most recent SecurID-related error. Corresponds directly to the value labeled 'Reason:' in the SERVER SECURID display. See MRV In-Reach documentation for a complete list of error numbers and their meaning.
OBJECT-TYPE    
  INTEGER 0..40  

securIDErrorUsername 1.3.6.1.4.1.33.10.20.26
The username associated with the most recent SecurID-related error. Corresponds directly to the value labeled 'Username:' in the SERVER SECURID display.
OBJECT-TYPE    
  DisplayString SIZE(0..17)  

securIDPortTable 1.3.6.1.4.1.33.10.20.27
A list of SecurID character port entries.
OBJECT-TYPE    
  SEQUENCE OF  
    SecurIDPortEntry

securIDPortEntry 1.3.6.1.4.1.33.10.20.27.1
Parameter values for a SecurID port.
OBJECT-TYPE    
  SecurIDPortEntry  

securIDPortIndex 1.3.6.1.4.1.33.10.20.27.1.1
An index value that uniquely identifies a port could relate to SecurID. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.
OBJECT-TYPE    
  INTEGER  

securIDPortStatus 1.3.6.1.4.1.33.10.20.27.1.2
A control indicating the level of SecurID operation on the port. Corresponds directly to PORT SECURID and the value 'SecurID' following the label 'Enabled Characteristics' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

xSsh 1.3.6.1.4.1.33.10.23
OBJECT IDENTIFIER    

sshPortTable 1.3.6.1.4.1.33.10.23.1
A list of SSH port entries
OBJECT-TYPE    
  SEQUENCE OF  
    SshPortEntry

sshPortEntry 1.3.6.1.4.1.33.10.23.1.1
Parameter values for an SSH port.
OBJECT-TYPE    
  SshPortEntry  

sshPortIndex 1.3.6.1.4.1.33.10.23.1.1.1
An index value that uniquely identifies an SSH port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the proposed standard Internet Character MIB.
OBJECT-TYPE    
  INTEGER  

sshPortIncomingTcpPort 1.3.6.1.4.1.33.10.23.1.1.2
Specifies the TCP port number used to identify the port when a SSH connection request arrives at the server. The default for a physical port is 2022 + 100 * port's physical port number. The default is 22 for virtual ports. Corresponds directly to the value labeled 'Remote Port:' in the PORT SSH CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 1..32767  

sshPortNewlineFiltering 1.3.6.1.4.1.33.10.23.1.1.3
Translation to apply to newline sequences (CR/NULL or CR/LF) received from the network during a SSH session, before sending the newline to the character port. The value indicates which input sequence is converted to which output sequence and sent to the character port, with 'none' meaning no translation. Corresponds directly to the value labeled 'Newline Filtering:' in the PORT SSH CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER none(1), crToCrLf(2), crToCrNull(3), crLfToCr(4), crLfToCrNull(5), crNullToCr(6), crNullToCrLf(7)  

sshPortNewline 1.3.6.1.4.1.33.10.23.1.1.4
Translation to apply to newline (carriage return) received from the character port during an SSH session, before sending the newline to the remote partner. Corresponds directly to the value labeled 'Newline:' in the PORT SSH CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER none(1), crToCrLf(2), crToCrNull(3), crLfToCr(4), crLfToCrNull(5), crNullToCr(6), crNullToCrLf(7)  

sshPortTransmitBufferedTime 1.3.6.1.4.1.33.10.23.1.1.5
Number of milliseconds to wait before transmitting data received from a character port during an interactive SSH session. Corresponds directly to the value labeled 'Transmit Buffered Time:' in the PORT SSH CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 30..1500  

sshPortRemoteProtocol 1.3.6.1.4.1.33.10.23.1.1.6
Indicates which remote protocols will be accepted at this port. Corresponds indirectly to the presence of 'Telnet' or 'SSH' under the label 'Enabled Characteristics:' in the PORT SSH CHARACTERISTICS display. If both protocols are accepted at the port, the choice of protocol is determined by which features are enabled on the server with SSH taking precedence over Telnet.
OBJECT-TYPE    
  INTEGER ssh(1), telnet(2), both(3)  

sshPortBreakSequence 1.3.6.1.4.1.33.10.23.1.1.7
A sequence of characters, which together define the break function. If this string is received from the SSH connection from across the network, the port will send a hardware break out of the serial port. The first character must be a carriage return (' '), and no more carriage returns may appear in the sequence. The second character must not be a NULL, or a line-feed (' '). Send a NULL to remove the break sequence. If the sequence exists, it must have two to four characters.
OBJECT-TYPE    
  OCTET STRING SIZE(0..4)  

sshCipherMask 1.3.6.1.4.1.33.10.23.2
This is a list of the encryption methods supported. The OCTET STRING contains a bitmap, with one bit for each cipher type. Corresponding bit numbers start with 0 as the low-order bit of the second octet. The following bit positions are defined: none(0), des(2), tripleDes(3), and blowfish(6). Corresponds directly to the value labeled 'SSH Cipher Enabled:' in the SERVER SSH CHARACTERISTICS display.
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

sshAuthenticationTimeout 1.3.6.1.4.1.33.10.23.3
The timeout in minutes before disconnecting if no successful authentication of SSH parties has been made. Corresponds directly to the value labeled 'Authentication Timeout:' in the SERVER SSH CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 1..120  

sshHostKeyLength 1.3.6.1.4.1.33.10.23.4
The bit length of the SSH host encryption key. When modified, the desired change does not occur until the next system initialization. Corresponds directly to the value labeled 'Host Key Length:' in the SERVER SSH CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 512..2048  

sshHostKeyGenerate 1.3.6.1.4.1.33.10.23.5
For a set-request with a value of generate or update, a new host key will be generated in the background. When modified with generate, the desired change does not occur until the next system initialization whereas when modified with update the change goes into effect upon completion of the new key. In response to a get-request or a get-next-request the agent will respond ready except when a host key is being created in which case the agent responds generate.
OBJECT-TYPE    
  INTEGER ready(1), generate(2), update(3)  

sshServerKeyLength 1.3.6.1.4.1.33.10.23.6
The bit length of the SSH server encryption key. The difference between the server and host key lengths should be greater than 128 bits. Corresponds directly to the value labeled 'Server Key Length:' in the SERVER SSH CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 512..2048  

sshServerKeyTtl 1.3.6.1.4.1.33.10.23.7
The time in minutes that the server key remains valid. After this time the server key is automatically re-generated. Corresponds directly to the value labeled 'Server Key Timeout:' in the SERVER SSH CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 30..1440  

sshServerMaxBufferSize 1.3.6.1.4.1.33.10.23.8
The size of the four buffers used by SSH for input and output. These buffers are used for data coming from the console, going to the network, coming from the network and going to the console.
OBJECT-TYPE    
  INTEGER 4096..262144  

xEthernet 1.3.6.1.4.1.33.11
OBJECT IDENTIFIER    

etherTable 1.3.6.1.4.1.33.11.1
A list of generic entries.
OBJECT-TYPE    
  SEQUENCE OF  
    EtherEntry

etherEntry 1.3.6.1.4.1.33.11.1.1
Generic status and parameter values for an Ethernet interface.
OBJECT-TYPE    
  EtherEntry  

etherIndex 1.3.6.1.4.1.33.11.1.1.1
An index value that uniquely identifies an Ethernet interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  INTEGER  

etherAlignmentErrors 1.3.6.1.4.1.33.11.1.1.2
A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check.
OBJECT-TYPE    
  Counter  

etherFCSErrors 1.3.6.1.4.1.33.11.1.1.3
A count of frames received on a particular interface that are an integral number of octets in length that do not pass the FCS check.
OBJECT-TYPE    
  Counter  

etherTxTable 1.3.6.1.4.1.33.11.2
A list of Ethernet transmit entries.
OBJECT-TYPE    
  SEQUENCE OF  
    EtherTxEntry

etherTxEntry 1.3.6.1.4.1.33.11.2.1
Transmit status and parameter values for an Ethernet interface.
OBJECT-TYPE    
  EtherTxEntry  

etherTxIndex 1.3.6.1.4.1.33.11.2.1.1
An index value that uniquely identifies an Ethernet interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  INTEGER  

etherTxSingleCollisionFrames 1.3.6.1.4.1.33.11.2.1.2
A count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts or ifOutNUcastPkts object and is not counted by the corresponding instance of the etherTxMultipleCollisionFrames object.
OBJECT-TYPE    
  Counter  

etherTxMultipleCollisionFrames 1.3.6.1.4.1.33.11.2.1.3
A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts or ifOutNUcastPkts object and is not counted by the corresponding instance of the etherTxSingleCollisionFrames object.
OBJECT-TYPE    
  Counter  

etherMulticastTable 1.3.6.1.4.1.33.11.3
A list of etherMulticast entries.
OBJECT-TYPE    
  SEQUENCE OF  
    EtherMulticastEntry

etherMulticastEntry 1.3.6.1.4.1.33.11.3.1
EtherMulticast status and parameter values for an Ethernet interface.
OBJECT-TYPE    
  EtherMulticastEntry  

etherMulticastIndex 1.3.6.1.4.1.33.11.3.1.1
An index value that uniquely identifies an Ethernet interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  INTEGER  

etherMulticastBytesIn 1.3.6.1.4.1.33.11.3.1.2
A count of frames successfully received on a particular interface and for which the destination address multicast bit was set. Bytes that are counted by an instance of this object are also counted by the corresponding instance of the ifInOctets object.
OBJECT-TYPE    
  Counter  

etherMulticastBytesOut 1.3.6.1.4.1.33.11.3.1.3
A count of successfully frames successfully transmitted on a particular interface and for which the destination address multicast bit was set. Bytes that are counted by an instance of this object are also counted by the corresponding instance of the ifOutOctets object.
OBJECT-TYPE    
  Counter  

etherXTxTable 1.3.6.1.4.1.33.11.4
A list of Ethernet extended transmit entries.
OBJECT-TYPE    
  SEQUENCE OF  
    EtherXTxEntry

etherXTxEntry 1.3.6.1.4.1.33.11.4.1
Extended transmit status and parameter values for an Ethernet interface.
OBJECT-TYPE    
  EtherXTxEntry  

etherXTxIndex 1.3.6.1.4.1.33.11.4.1.1
An index value that uniquely identifies an Ethernet interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  INTEGER  

etherXTxExcessiveCollisions 1.3.6.1.4.1.33.11.4.1.2
A count of frames for which transmission on a particular interface fails due to excessive collisions.
OBJECT-TYPE    
  Counter  

xBootClient 1.3.6.1.4.1.33.12
OBJECT IDENTIFIER    

bootClientStatus 1.3.6.1.4.1.33.12.1
The overall status of the bootstrapping operation, including, for example, what is presently happening and error information.
OBJECT-TYPE    
  DisplayString SIZE(0..1400)  

xCharacter 1.3.6.1.4.1.33.13
OBJECT IDENTIFIER    

xBasic 1.3.6.1.4.1.33.13.1
OBJECT IDENTIFIER    

basicBroadcast 1.3.6.1.4.1.33.13.1.1
Control for user ability to broadcast messages to other local ports. Corresponds directly to SERVER BROADCAST and the presence of the label 'Broadcast' following the label 'Enabled Characteristics:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicErrorReport 1.3.6.1.4.1.33.13.1.2
Control for server display of an error when the user gives an unsupported command. Corresponds directly to SERVER REPORT ERRORS and the presence of the label 'Report Errors' following the label 'Enabled Characteristics:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicLock 1.3.6.1.4.1.33.13.1.3
Control for user ability to use a password to protect a logged in terminal from other users. Corresponds directly to SERVER LOCK and the presence of the label 'Lock' following the label 'Enabled Characteristics:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicInactivityTimer 1.3.6.1.4.1.33.13.1.4
Number of minutes a terminal may remain logged in with no sessions, no input or output, and no modem transitions. Corresponds directly to SERVER INACTIVITY TIMER and the value labeled 'Inactivity Timer:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 1..480  

basicPasswordRetryLimit 1.3.6.1.4.1.33.13.1.5
Number of times the server allows a user to retry an incorrect password. Corresponds directly to SERVER PASSWORD LIMIT and the value labeled 'Password Limit:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..250  

basicPrivilegedPassword 1.3.6.1.4.1.33.13.1.6
The password a user must enter to become privileged. For security reasons, reading this object always returns a zero-length value. Corresponds directly to SERVER PRIVILEGED PASSWORD.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

basicLoginPassword 1.3.6.1.4.1.33.13.1.7
The password a user must enter to be given the opportunity to log in. For security reasons, reading this object always returns a zero-length value. Corresponds directly to SERVER LOGIN PASSWORD.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

basicLoginPrompt 1.3.6.1.4.1.33.13.1.8
The text string the server displays to prompt a user for the login password. Corresponds directly to SERVER LOGIN PROMPT.
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

basicWelcome 1.3.6.1.4.1.33.13.1.9
The text string the server displays before attempting to log in a user. Corresponds directly to SERVER WELCOME and the value labeled 'Welcome:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

basicActivePorts 1.3.6.1.4.1.33.13.1.10
The number of ports with connected sessions or logged in users. Corresponds directly to the value labeled 'Active Ports:' and 'Cur' in the SERVER STATUS display.
OBJECT-TYPE    
  Gauge  

basicActivePortsHigh 1.3.6.1.4.1.33.13.1.11
The highest value of basicActivePorts since system initialization. Corresponds directly to the value labeled 'Active Ports:' and 'High' in the SERVER STATUS display.
OBJECT-TYPE    
  Gauge  

basicActiveUsers 1.3.6.1.4.1.33.13.1.12
The number of logged in users. Corresponds directly to the value labeled 'Active Users:' and 'Cur' in the SERVER STATUS display.
OBJECT-TYPE    
  Gauge  

basicActiveUsersHigh 1.3.6.1.4.1.33.13.1.13
The highest value of basicActiveUsers since system initialization. Corresponds directly to the value labeled 'Active Users:' and 'High' in the SERVER STATUS display.
OBJECT-TYPE    
  Gauge  

basicSessions 1.3.6.1.4.1.33.13.1.14
The total number of connected sessions. Corresponds directly to the value labeled 'Connected Sessions:' and 'Cur' in the SERVER STATUS display.
OBJECT-TYPE    
  Gauge  

basicSessionsHigh 1.3.6.1.4.1.33.13.1.15
The highest value of basicSessions since system initialization. Corresponds directly to the value labeled 'Connected Sessions:' and 'High' in the SERVER STATUS display.
OBJECT-TYPE    
  Gauge  

basicSessionsLimit 1.3.6.1.4.1.33.13.1.16
The maximum total number of sessions that can simultaneously be connected to the system. A value of -1 indicates no limit up to available dynamic system memory. Corresponds directly to SERVER SESSION LIMIT and the value labeled 'Connected Sessions:' and 'Max' in the SERVER STATUS display.
OBJECT-TYPE    
  INTEGER -1..255  

basicPortTable 1.3.6.1.4.1.33.13.1.17
A list of basic character port entries.
OBJECT-TYPE    
  SEQUENCE OF  
    BasicPortEntry

basicPortEntry 1.3.6.1.4.1.33.13.1.17.1
Basic parameter values for a port.
OBJECT-TYPE    
  BasicPortEntry  

basicPortIndex 1.3.6.1.4.1.33.13.1.17.1.1
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the standard Character MIB.
OBJECT-TYPE    
  INTEGER  

basicPortDefaultDestAction 1.3.6.1.4.1.33.13.1.17.1.2
The action to take relative to basicPortDefaultDestName. Corresponds directly to PORT DEDICATED/PREFERRED SERVICE and the label 'Dedicated/Preferred Service:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER dedicated(1), preferred(2)  

basicPortDefaultDestProtocol 1.3.6.1.4.1.33.13.1.17.1.3
The session protocol to use with basicPortDefaultDestName. Corresponds directly to LAT/TELNET PORT DEDICATED/PREFERRED SERVICE.
OBJECT-TYPE    
  INTEGER lat(1), telnet(2), any(3)  

basicPortDefaultDestName 1.3.6.1.4.1.33.13.1.17.1.4
The default name to use in forming a connection when no other name is specified. Corresponds directly to PORT DEDICATED/PREFERRED SERVICE and the value labeled 'Dedicated/Preferred Service:' in the PORT CHARACTERISTICS display. If the value of basicPortDefaultDestProtocol is 'telnet', an Internet port number may be included on the end of the name, delimited with a colon (':'). If the value of basicPortDefaultDestProtocol is not 'telnet', then the maximum length is 16.
OBJECT-TYPE    
  DisplayString SIZE(0..50)  

basicPortDefaultDestLATNodeName 1.3.6.1.4.1.33.13.1.17.1.5
A LAT node name to use with basicPortDefaultDestName. Corresponds directly to PORT DEDICATED/PREFERRED SERVICE NODE and the value labeled 'Node:' following the label 'Dedicated/Preferred Service:' in the PORT CHARACTERISTICS display. This object can have a non- zero-length value only if the value of basicPortDefaultDestProtocol is 'lat'.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

basicPortDefaultDestLATPortName 1.3.6.1.4.1.33.13.1.17.1.6
A LAT port name to use with basicPortDefaultDestName. Corresponds directly to PORT DEDICATED/PREFERRED SERVICE NODE and the value labeled 'Node:' following the label 'Dedicated/Preferred Service:' in the PORT CHARACTERISTICS display. this object can hav a non-zero-length value only if the value if basicPortDefaultDestProtocol is 'lat'
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

basicPortAutoConnect 1.3.6.1.4.1.33.13.1.17.1.7
Control for automatic session connection. Corresponds directly to PORT AUTOCONNECT and the presence of the label 'Autoconnect' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortAutoLogin 1.3.6.1.4.1.33.13.1.17.1.8
Control for automatic port login. Corresponds directly to PORT AUTODEDICATED and the presence of the label 'Autodedicated' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortBroadcast 1.3.6.1.4.1.33.13.1.17.1.9
Control for display of messages sent by users on other ports. Corresponds directly to PORT BROADCAST and the presence of the label 'Broadcast' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortConnectResume 1.3.6.1.4.1.33.13.1.17.1.10
Control for behavior of a connection attempt to a destination where the port already has a connection. 'disabled' causes a new connection. 'enabled' causes the existing connection to become the active connection. Corresponds directly to PORT CONNECTRESUME and the presence of the label 'Connectresume' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortDialup 1.3.6.1.4.1.33.13.1.17.1.11
Defines whether the port should be considered as connected to a dialup line. 'enabled' means that it is. Corresponds directly to PORT DIALUP and the presence of the label 'Dial Up' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. This object is not available on units that do not support modem signals (ie 2220).
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortIdleTimeout 1.3.6.1.4.1.33.13.1.17.1.12
The number of minutes the system will allow a session to have no activity before automatically disconnecting it. A value of -1 indicates no timeout. Zero is not a valid value. Corresponds directly to PORT IDLE TIMEOUT and the value labeled 'Idle Timeout:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER -1..480  

basicPortInactivityLogout 1.3.6.1.4.1.33.13.1.17.1.13
Control for the system automatically logging the port out when it has no sessions, no local activity, and no modem signal changes for the time period specified by basicInactivityTimer. Corresponds directly to PORT INACTIVITY LOGOUT and the presence of the label 'Inactivity Logout' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortLossNotification 1.3.6.1.4.1.33.13.1.17.1.14
Control for the system sending a Bell character to the port when it looses an input character due to an overrun or data error. Corresponds directly to PORT LOSS NOTIFICATION and the presence of the label 'Loss Notification' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortMessageCodes 1.3.6.1.4.1.33.13.1.17.1.15
Control for including error numbers in error messages displayed on the port. Corresponds directly to PORT MESSAGE CODES and the presence of the label 'Message Codes' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortMultisessions 1.3.6.1.4.1.33.13.1.17.1.16
Control for running the multisession line protocol between the port and the locally-connected terminal. Corresponds directly to PORT MULTISESSIONS and the presence of the label 'Multisessions' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortDefaultUserName 1.3.6.1.4.1.33.13.1.17.1.17
Default user name to use for automatically logging in the port. Corresponds directly to PORT USERNAME and the value labeled 'Port n:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

basicPortVerification 1.3.6.1.4.1.33.13.1.17.1.18
Control for display of informational messages on the port when the user connects, disconnects, or switches a session. Corresponds directly to PORT VERIFICATION and the presence of the label 'Verification' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortDefaultProtocol 1.3.6.1.4.1.33.13.1.17.1.19
The session protocol to use when not otherwise specified. Corresponds directly to PORT RESOLVE SERVICE and the value labeled 'Resolve Service:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER lat(1), telnet(2), anylat(3), anytelnet(13)  

basicPortLogins 1.3.6.1.4.1.33.13.1.17.1.20
The number of logins on the port since system initialization. Corresponds directly to the value labeled 'Local Accesses:' in the PORT COUNTERS display.
OBJECT-TYPE    
  Counter  

basicPortRemoteSessions 1.3.6.1.4.1.33.13.1.17.1.21
The number of remotely originating sessions to the port since system initialization. Corresponds directly to the value labeled 'Remote Accesses:' in the PORT COUNTERS display.
OBJECT-TYPE    
  Counter  

basicPortIdleTimeouts 1.3.6.1.4.1.33.13.1.17.1.22
The number of session disconnects due to expiration of basicPortIdleTimeout. Corresponds directly to the value labeled 'Idle Timeouts:' in the PORT COUNTERS display.
OBJECT-TYPE    
  Counter  

basicPortStatus 1.3.6.1.4.1.33.13.1.17.1.23
The current operational status of the port. Corresponds directly to the value labeled 'Status:' in the PORT STATUS display.
OBJECT-TYPE    
  INTEGER idle(1), local(2), waitInput(3), executingCommand(4), connecting(5), checkConnect(6), waitOutput(7), connected(8), disconnecting(9), disconnect(10), suspended(11), locked(12), permanent(13), loginWait(14), retryConnect(15), connectWait(16), logout(17), login(18), waitSession(19), reset(20), testServiceWait(21), testServiceOut(22), connectPassword(23), waitLogout(24), waitQueue(25), cancelQueue(26), autobaud(27), available(28), checkModem(29), slip(30), signalWait(31), scriptSearch(32), scriptLoad(33), scriptRun(34), dialback1(35), dialback2(36), dialback3(37), xremote(38), ppp(39), cslip(40), arapInit(41), cclAnswer(42), cclOriginate(43), cclHangup(44), kerberos(45), securID(46), arapUser(47), arapDialback(48), arapSearch(49), arapLoad(50), arapRead(51), arapDialDone(52), arapExit(53), arapEnabling(54), arapConnecting(55), cclLoading(56), cclLoadError(57), cclLoadWaiting(58), cclExecute(59), cclDone(60), apd(61)  

basicPortLastInCharacter 1.3.6.1.4.1.33.13.1.17.1.24
The character that most recently came into the port. Corresponds directly to the value labeled 'Last Char Input:' in the PORT STATUS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicPortLastOutCharacter 1.3.6.1.4.1.33.13.1.17.1.25
The character that most recently went out of the port. Corresponds directly to the value labeled 'Last Char Output:' in the PORT STATUS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicPortActiveUserName 1.3.6.1.4.1.33.13.1.17.1.26
The user name currently logged into the port. Corresponds directly to the value by the port number and labeled 'Username' in the USERS display.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

basicPortDefaultSessionMode 1.3.6.1.4.1.33.13.1.17.1.27
Data recognition mode when starting a session, with the following meanings: interactive locally recognize all controls binary recognize only session protocol (corresponds to PASSALL) binaryWithFlow recognize only XON and XOFF (corresponds to PASTHRU transparent recognize no data Corresponds directly to PORT DEFAULT SESSION MODE and the value labeled 'Default Session Mode:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER interactive(1), binary(2), binaryWithFlow(3), transparent(4)  

basicPortZero 1.3.6.1.4.1.33.13.1.17.1.28
Control to zero counters for the port. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' causes the port's counters to be zeroed. Corresponds to the ZERO PORT command.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

basicPortZeroTime 1.3.6.1.4.1.33.13.1.17.1.29
The number of hundredths of a second since the most recent zeroing of the port's counters, such as through execution of basicPortZero. Corresponds directly to the value labeled 'Seconds Since Zeroed:' in the PORT COUNTERS display.
OBJECT-TYPE    
  TimeTicks  

basicPortUnixCommands 1.3.6.1.4.1.33.13.1.17.1.30
Control to allow the user to use Unix-style commands the port.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2), primary(3), only(4)  

basicPortSessionMode 1.3.6.1.4.1.33.13.1.17.1.31
Data recognition mode for an active session, with the following meanings: interactive locally recognize all controls binary recognize only session protocol (corresponds to PASSALL) binaryWithFlow recognize only XON and XOFF (corresponds to PASTHRU transparent recognize no data noActiveSessions no sessions on this port. This object can be set to values of 1 to 4, but only if there is an active session on the port.
OBJECT-TYPE    
  INTEGER interactive(1), binary(2), binaryWithFlow(3), transparent(4), noActiveSessions(5)  

basicPortRemoteDisconnectNotify 1.3.6.1.4.1.33.13.1.17.1.32
If enabled, a BELL (ctrl G) will be sent out the serial port when a remote session is disconnected and the port is logged out.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortDefaultDestControlled 1.3.6.1.4.1.33.13.1.17.1.33
A control to send preconfigured controlled port session strings when entering or exiting a session established to the basicPortDefaultDestName. Corresponds directly to the value labeled '(Controlled)' following the label 'Dedicated/Preferred Service:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortControlledPortLogin 1.3.6.1.4.1.33.13.1.17.1.34
A control string to send out the serial port upon port login. Corresponds to the hexadecimal code which is represented in ASCII following the label 'Controlled Port Login:' in the PORT CONTROLLED display.
OBJECT-TYPE    
  OCTET STRING SIZE(0..32)  

basicPortControlledPortLogout 1.3.6.1.4.1.33.13.1.17.1.35
A control string to send out the serial port upon port logout. Corresponds to the hexadecimal code which is represented in ASCII following the label 'Controlled Port Logout:' in the PORT CONTROLLED display.
OBJECT-TYPE    
  OCTET STRING SIZE(0..32)  

basicPortControlledSessionInitialize 1.3.6.1.4.1.33.13.1.17.1.36
A control string to send out the serial port upon entering a session. Corresponds to the hexadecimal code which represented in ASCII following the label 'Controlled Session Initialize:' in the PORT CONTROLLED display.
OBJECT-TYPE    
  OCTET STRING SIZE(0..32)  

basicPortControlledSessionTerminate 1.3.6.1.4.1.33.13.1.17.1.37
A control string to send out the serial port upon exiting a session. Corresponds to the hexadecimal code which is represented in ASCII following the label 'Controlled Session Terminate:' in the PORT CONTROLLED display.
OBJECT-TYPE    
  OCTET STRING SIZE(0..32)  

basicPortRloginTransparentMode 1.3.6.1.4.1.33.13.1.17.1.38
A control to pass x'ff' as binary data, not doubling x'ff'. Similar to basicPortSessionMode = transparent but for a rlogin session.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortLoginDuration 1.3.6.1.4.1.33.13.1.17.1.39
The amount of time in minutes that a port may remain logged in regardless of the activity on the port. The value 0 indicates that the timer is disabled. Corresponds directly to the value labeled 'Login Duration:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..64800  

basicPortOutboundSecurity 1.3.6.1.4.1.33.13.1.17.1.40
Control to disable outbound security, which can be either Kerberos or SecureID, on a per port basis. Corresponds directly to the presence of the value 'OutboundSecurity' following the label 'Enabled Characteristics' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortXonTimer 1.3.6.1.4.1.33.13.1.17.1.41
Indicates the number of seconds between successive 'XON's sent out a port. A zero signifies that the timer is disabled. Corresponds directly to the value labeled 'Xon Send Timer:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..2550  

basicPortDefaultDedicatedSessionType 1.3.6.1.4.1.33.13.1.17.1.42
This integer is interpreted as a bit mask that specifies the default session type for a dedicated service for this port. The bit numbers are: 1;service name, 2;node name, 3;port name, 4, telnet console; 5, rlogin; 6, bridge console; 7, chassis console.
OBJECT-TYPE    
  INTEGER 0..168  

basicPortIdleTimeReceive 1.3.6.1.4.1.33.13.1.17.1.43
Control to restrict the basicPortIdleTimeout to apply to data received from the network and transmitted out the serial port. Data received by the serial port will not be considered activity. Corresponds directly to the value labeled 'Idle Time Receive Mode:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortIdleTimeTransmit 1.3.6.1.4.1.33.13.1.17.1.44
Control to restrict the basicPortIdleTimeout to apply to data received from the serial port and transmitted out the LAN. Data received from the network will not count as activity. Corresponds directly to the value labeled 'Idle Time Transmit Mode:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortZeroDisconnectSession 1.3.6.1.4.1.33.13.1.17.1.45
A control to disconnect a session at Port 0 when the password limit is reached.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortConsolePort 1.3.6.1.4.1.33.13.1.17.1.46
Control to configure this port as a console port. This control is only valid on those models with variable configuration ports. This object can only be set enabled; and doing so will disable basicPortSensor and basicPortAlarmControl. A set will only update the permanent database. Use a charPortReset for this change to take effect.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortLoginPassword 1.3.6.1.4.1.33.13.1.17.1.47
The password a user must enter to be given the opportunity to log in to a given port. For security reasons reading this object always returns a zero-length value. Corresponds directly to PORT LOGIN PASSWORD.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

basicPortSensor 1.3.6.1.4.1.33.13.1.17.1.48
Control to configure this port as a temperature and humidity sensor. This control is only valid on those models with variable configuration ports. This object can only be set enabled; and doing so will disable basicPortConsolePort and basicPortAlarmControl. A set will only update the permanent database. Use a charPortReset for this change to take effect.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortAlarmControl 1.3.6.1.4.1.33.13.1.17.1.49
Control to configure this port for alarm input and control output. This control is only valid on those models with variable configuration ports. This object can only be set enabled; and doing so will disable basicPortConsolePort and basicPortSensor. A set will only update the permanent database. Use a charPortReset for this change to take effect.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortCommandLogging 1.3.6.1.4.1.33.13.1.17.1.50
A control to toggle logging of commands at this port. Command input may be logged from direct terminal connections, session input from the LAN, or session output to the LAN. Corresponds directly to the presence of 'Command Logging' under the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. The desired change will not take effect until the port is logged off.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortBreakSequence 1.3.6.1.4.1.33.13.1.17.1.51
A sequence of characters to be sent out the serial port on receipt of a Break from the network in lieu of a hardware break. The sequence entered by the user is converted into an octet string up to four bytes long to be sent out the serial port. For example, the user's representation of octal 2, or '', takes four characters in basicPortBreakSequence; but only one byte in the string sent out the serial port.
OBJECT-TYPE    
  OCTET STRING SIZE(0..16)  

basicPortTl1Mode 1.3.6.1.4.1.33.13.1.17.1.53
Controls the TL1 mode of a port. Valid TL1 modes are human- to-machine language (hml), machine-to-machine language (mml), and MML without echo. MML is for direct connection to another TL1 device whereas HML provides human prompts. A change takes effect after logging out the port.
OBJECT-TYPE    
  INTEGER disabled(1), hml(2), mml(3), mmlNoEcho(4)  

basicPortTl1Console 1.3.6.1.4.1.33.13.1.17.1.54
Controls whether this port becomes the TL1 console receiving and displaying autonomous reports of alarm events. A change takes effect after logging out the port.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortFallThrough 1.3.6.1.4.1.33.13.1.17.1.55
Control to allow a user to login to a port after RADIUS or SecurID authentication fails because the RADIUS servers or SecurID servers are unavailable. When a user is logged in via 'fallthrough', he is logged in to the port as a non-privileged user. The change takes effect after logging out the port.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortCommandLoggingSuppressControlCharacters 1.3.6.1.4.1.33.13.1.17.1.56
Control to toggle suppression of control characters in the command log. This object can only be set to enabled when command logging is enabled on that port.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortDataLogging 1.3.6.1.4.1.33.13.1.17.1.57
Control to toggle data logging on the specified port.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortDataLoggingSuppressControlCharacters 1.3.6.1.4.1.33.13.1.17.1.58
Control to toggle suppression of control characters in the data log. This object can only be set to enabled when data logging is enabled on that port.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortOnboardSecurity 1.3.6.1.4.1.33.13.1.17.1.59
A control to toggle onboard security for this port where the username and password are authenticated against an internal access list. The desired change will not take effect until the port is logged off.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortFallBack 1.3.6.1.4.1.33.13.1.17.1.60
Control to allow a 'fallback' authentication mechanism after RADIUS or SecurID authentication fails because the RADIUS or SecurID servers are unavailable. Onboard security, an internal security database, is used for fallback authentication. The user in fallback mode must enter a valid username and password to be successfully logged in. The change takes effect after logging out the port.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortAlarmMaster 1.3.6.1.4.1.33.13.1.17.1.61
Control to configure this port for high densitiy alarm input and control output management. This control is only valid on those models with variable configuration ports. This object can only be set enabled; and doing so will disable basicPortConsolePort, basicPortSensor and basicPortAlarmControl. A set will only update the permanent database. Use a charPortReset for this change to take effect.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortAlarmMasterAccounting 1.3.6.1.4.1.33.13.1.17.1.62
Control to toggle logging of alarm events on this port. Use a charPortReset for this change to take effect.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortAlarmMasterAudibleAlarm 1.3.6.1.4.1.33.13.1.17.1.63
Control whether the alarm will have an audible sound for all alarm points attached to this port.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortAlarmMasterFixTime 1.3.6.1.4.1.33.13.1.17.1.64
Time in minutes between audible alarm soundings for an alarm master port. This occurs after someone hits the master alarm reset button. If there is at least one alarm condition on an alarm point within the fix time, then the alarm will sound again at the end of that fix time.
OBJECT-TYPE    
  INTEGER 1..720  

basicPortAlarmMasterLcdDisplayString 1.3.6.1.4.1.33.13.1.17.1.65
Updates the LCD display message for the high density alarm unit attached to the port. Corresponds directly to the DISPLAY AMST command.
OBJECT-TYPE    
  DisplayString SIZE(32)  

basicPortAlarmMasterReboot 1.3.6.1.4.1.33.13.1.17.1.66
Control to reboot the high density alarm unit attached to the port when set to 'execute'. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Corresponds directly to the REBOOT AMST command.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

basicPortAlarmMasterUpdateFirmwareHost 1.3.6.1.4.1.33.13.1.17.1.67
The internet address of the server to use when downloading a new firmware image for the high density alarm unit attached to this port via TFTP. Corresponds directly to the UPDATE AMST FIRMWARE command's INTERNET ADDRESS parameter.
OBJECT-TYPE    
  IpAddress  

basicPortAlarmMasterUpdateFirmwareFileName 1.3.6.1.4.1.33.13.1.17.1.68
The filename to request when downloading a new firmware image for the high density alarm unit attached to this port via TFTP. Corresponds directly to the UPDATE AMST FIRMWARE command's FILE parameter.
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

basicPortAlarmMasterUpdateFirmware 1.3.6.1.4.1.33.13.1.17.1.69
Control to update firmware for the high density alarm unit attached to the port when set to 'execute'. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. The basicPortAlarmMasterUpdateFirmwareHost and basicPortAlarmMasterUpdateFirmwareFileName must be set prior to setting this object. Corresponds directly to the UPDATE AMST FIRMWARE command.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

basicPortAlarmMasterStatus 1.3.6.1.4.1.33.13.1.17.1.70
Indicates the current status of the high density alarm unit attached to the port. If no response is obtained from this unit, the status is set to basicPortAlarmMasterFaultSeverity. Otherwise it is cleared.
OBJECT-TYPE    
  INTEGER cleared(1), indeterminate(2), warning(3), minor(4), major(5), critical(6)  

basicPortAlarmMasterFaultSeverity 1.3.6.1.4.1.33.13.1.17.1.71
Control to determine the severity level associated with the trap sent out when a fault occurs when no response is obtained from the high density alarm unit attached to this port.
OBJECT-TYPE    
  INTEGER indeterminate(2), warning(3), minor(4), major(5), critical(6)  

basicPortPowerMaster 1.3.6.1.4.1.33.13.1.17.1.72
Control to configure this port as a power master port. This control is only valid on those models with variable configuration ports and which support the power master. This object can only be set enabled, and doing so will disable the previous port type, such as basicPortConsolePort. A set will only update the permanent database. Use a charPortReset for this change to take effect.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortPowerMasterTimeDelay 1.3.6.1.4.1.33.13.1.17.1.73
Control to set the power up delay interval in milliseconds for the power device attached to this port. A response of 'none' to a get-request or get-next-request may indicate that the power unit attached to this port is not responding with status.
OBJECT-TYPE    
  INTEGER none(1), oneHundred(100), twoHundred(200), threeHundred(300), fourHundred(400), fiveHundred(500), sixHundred(600), sevenHundred(700), eightHundred(800), nineHundred(900)  

basicPortPowerMasterSwitch 1.3.6.1.4.1.33.13.1.17.1.74
Control to power on or off all of the outlets in the power device attached to this port. A get-request or a get-next- request always returns ready.
OBJECT-TYPE    
  INTEGER ready(1), off(2), on(3)  

basicPortPowerMasterModel 1.3.6.1.4.1.33.13.1.17.1.75
The model number of the power master device, which is connected to this port. A response of a null string to a get-request or get-next-request indicates that the power unit attached to this port is not responding with status.
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

basicPortPowerMasterSerialNumber 1.3.6.1.4.1.33.13.1.17.1.76
The serial number of the power master device, which is connected to this port. A response of a null string to a get-request or get-next-request indicates that the power unit attached to this port is not responding with status.
OBJECT-TYPE    
  DisplayString SIZE(0..17)  

basicPortPowerMasterFirmware 1.3.6.1.4.1.33.13.1.17.1.77
The firmware version of the power master device, which is connected to this port. A response of a null string to a get-request or get-next-request indicates that the power unit attached to this port is not responding with status.
OBJECT-TYPE    
  DisplayString SIZE(0..12)  

basicPortLockout 1.3.6.1.4.1.33.13.1.17.1.78
Control to prohibit access to this port and send a trap when login authentication fails. One must log out the port for this change to take effect.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortAsciiToTrapTranslation 1.3.6.1.4.1.33.13.1.17.1.79
Control to configure the port as an ascii-to-trap translator. One must log out the port for this change to take effect.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortAsciiToTrapTranslationTrapSeverity 1.3.6.1.4.1.33.13.1.17.1.80
Control to determine the severity level associated with the trap sent out from this port. One must log out the port for this change to take effect.
OBJECT-TYPE    
  INTEGER cleared(1), indeterminate(2), warning(3), minor(4), major(5), critical(6)  

basicPortAsciiToTrapTranslationMessages 1.3.6.1.4.1.33.13.1.17.1.81
Count of number of trap messages sent from this port.
OBJECT-TYPE    
  Counter  

basicPortAsciiToTrapTranslationLastMessage 1.3.6.1.4.1.33.13.1.17.1.82
The last message or partial message sent out by this port.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

basicPortPowerMasterAlarmSeverity 1.3.6.1.4.1.33.13.1.17.1.83
Control to determine the severity level associated with the trap sent out when the power device is not responding to this port.
OBJECT-TYPE    
  INTEGER indeterminate(2), warning(3), minor(4), major(5), critical(6)  

basicPortPowerMasterDeviceStatus 1.3.6.1.4.1.33.13.1.17.1.84
Indicates the current status of the power device controlled by this port. If the device is responding, the status is cleared. Otherwise the status matches the basicPortPowerMasterAlarmSeverity.
OBJECT-TYPE    
  INTEGER cleared(1), indeterminate(2), warning(3), minor(4), major(5), critical(6)  

basicPortBuffering 1.3.6.1.4.1.33.13.1.17.1.85
Control to allow data from an attached device to be retained across multiple sessions. When a session is established to a port with buffering, the contents of the command buffer is sent to the remote device. One must log out the port for this change to take effect.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortLogFacilityLevel 1.3.6.1.4.1.33.13.1.17.1.86
Indicates that server originated accounting messages pertaining to this port are logged to the syslog host at this UNIX facility level. If 'none', the server's sessionLogFacility is used.
OBJECT-TYPE    
  INTEGER none(1), local0(2), local1(3), local2(4), local3(5), local4(6), local5(7), local6(8), local7(9), user(10)  

basicPortPppDialBackup 1.3.6.1.4.1.33.13.1.17.1.87
Indicates whether this port is configured as a PPP dial backup port. This parameter will not take effect until the port is logged out, and this function is restricted to one port.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortPppDialBackupNumber 1.3.6.1.4.1.33.13.1.17.1.88
The number to dial when a PPP dial backup link is activated, which occurs when the network is down and there are SNMP traps to forward. The port must be a basicPortPppDialBackup port, and it must be logged out for the change to take effect.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicPortPppDialBackupRedialTimer 1.3.6.1.4.1.33.13.1.17.1.89
Indicates the time in seconds to wait before redialing the basicPortPppDialBackupNumber on a basicPortPppDialBackup port.
OBJECT-TYPE    
  INTEGER 30..65535  

basicPortPppDialBackupRedialRetries 1.3.6.1.4.1.33.13.1.17.1.90
Indicates the number of time to try to dial the backup number before recording an error, logging out the port, and if there are new traps trying to dial again.
OBJECT-TYPE    
  INTEGER 1..65535  

basicPortPppDialBackupDisconnectTimer 1.3.6.1.4.1.33.13.1.17.1.91
Indicates the time in seconds that the dial backup link will stay up when there is no more SNMP traffic flowing prior to disconnecting it.
OBJECT-TYPE    
  INTEGER 1..65535  

basicPortPppDialBackupLocalAddress 1.3.6.1.4.1.33.13.1.17.1.92
The local address to use in a PPP dial backup link when the network connection is down and there are SNMP traps to forward.
OBJECT-TYPE    
  IpAddress  

basicPortPppDialBackupDestinationAddress 1.3.6.1.4.1.33.13.1.17.1.93
The destination address to use in a PPP dial backup link when the network connection is down and there are SNMP traps to forward.
OBJECT-TYPE    
  IpAddress  

basicPortPppDialBackupAddresses 1.3.6.1.4.1.33.13.1.17.1.94
Control to initiate dialing from a dial backup port. In response to get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' after a valid basicPortPppDialBackupLocalAddress and basicPortPppDialBackupDestinationAddress are configured causes the basicPortPppDialBackup port to dial the basicPortPppDialBackupNumbermber.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

basicSerialPortTable 1.3.6.1.4.1.33.13.1.18
A list of basic character serial port entries.
OBJECT-TYPE    
  SEQUENCE OF  
    BasicSerialPortEntry

basicSerialPortEntry 1.3.6.1.4.1.33.13.1.18.1
Basic parameter values for a serial port.
OBJECT-TYPE    
  BasicSerialPortEntry  

basicSerialPortIndex 1.3.6.1.4.1.33.13.1.18.1.1
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the standard Character MIB.
OBJECT-TYPE    
  INTEGER  

basicSerialPortBreak 1.3.6.1.4.1.33.13.1.18.1.2
Action to take on a BREAK condition from the port. Corresponds directly to PORT BREAK and the value labeled 'Break:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER ignore(1), localSwitch(2), sendRemote(3)  

basicSerialPortInterrupts 1.3.6.1.4.1.33.13.1.18.1.3
Control for recognizing BREAK or local switch to interrupt a session. Corresponds directly to PORT INTERRUPTS and the presence of the label 'Interrupts' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortNoLoss 1.3.6.1.4.1.33.13.1.18.1.4
Control for storing port input locally in anticipation of session startup. Corresponds directly to PORT NOLOSS and the presence of the label 'Noloss' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortPause 1.3.6.1.4.1.33.13.1.18.1.5
Control for pausing after each screenful of locally-originated output to the port. Corresponds directly to PORT PAUSE and the presence of the label 'Pause' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortPrompt 1.3.6.1.4.1.33.13.1.18.1.6
Prompt for the system to use on the port. Corresponds directly to PORT PROMPT and the value labeled 'Prompt:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

basicSerialPortTerminalType 1.3.6.1.4.1.33.13.1.18.1.7
Type of terminal attached to the port, for formatting local output. Corresponds directly to PORT TYPE and the value labeled 'Type:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER ansi(1), hardcopy(2), softcopy(3)  

basicSerialPortTypeaheadLimit 1.3.6.1.4.1.33.13.1.18.1.8
Maximum number of input characters to hold pending tranmission on a session. Corresponds directly to PORT TYPEAHEAD SIZE and the value labeled 'Typeahead Size:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 80..16384  

basicSerialPortBackwardSwitch 1.3.6.1.4.1.33.13.1.18.1.9
Character input from the character port to cause a switch to the previous, lower numbered session. The value 0 indicates no character has this effect. Corresponds directly to PORT BACKWARD SWITCH and the value labeled 'Backwards Switch:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicSerialPortForwardSwitch 1.3.6.1.4.1.33.13.1.18.1.10
Character input from the character port to cause a switch to the next, higher numbered session. The value 0 indicates no character has this effect. Corresponds directly to PORT FORWARD SWITCH and the value labeled 'Forwards Switch:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicSerialPortLocalSwitch 1.3.6.1.4.1.33.13.1.18.1.11
Character input from the character port to cause a switch to local command mode. The value 0 indicates no character has this effect. Corresponds directly to PORT LOCAL SWITCH and the value labeled 'Local Switch:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicSerialPortModemControl 1.3.6.1.4.1.33.13.1.18.1.12
Control for observing hardware modem control signals. Corresponds directly to PORT MODEM CONTROL and the value labeled 'Modem Control:' in the PORT CHARACTERISTICS display. This object is not available on units that do not support modem signals (ie 2220).
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortSignalCheck 1.3.6.1.4.1.33.13.1.18.1.13
Control for observing DSR and DCD to bound allowing sessions. Corresponds directly to PORT SIGNAL CHECK and the presence of the label 'Signal Check' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. This object is not available on units that do not support modem signals (ie 2220).
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortDSRLogout 1.3.6.1.4.1.33.13.1.18.1.14
Control for logging out the port when DCD is deasserted. Corresponds directly to PORT DSRLOGOUT and the presence of the label 'DSRlogout' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. This object is not available on units that do not support modem signals (ie 2220).
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortDSRObserve 1.3.6.1.4.1.33.13.1.18.1.15
Control for beginning the login sequence on the port when DCD is asserted. Corresponds directly to PORT DSRWAIT and the presence of the label 'DSRwait' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. This object is not available on units that do not support modem signals (ie 2220).
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortDCDTimeout 1.3.6.1.4.1.33.13.1.18.1.16
The number of milleseconds that DCD may be asserted before disconnecting the port. Corresponds directly to PORT DCD TIMEOUT and the value labeled 'DCD Timeout:' in the PORT ALTERNATE CHARACTERISTICS display. This object is not available on units that do not support modem signals (ie 2220).
OBJECT-TYPE    
  INTEGER 0..10000  

basicSerialPortDTRAssert 1.3.6.1.4.1.33.13.1.18.1.17
Control when the system asserts DTR on the port. always unconditional(DISABLED) onConnectionOrRing connection formed or RING asserted(ENABLED) onConnection connection formed (FORCONNECTION) onRing RING asserted (FORRING) Corresponds directly to PORT DTRWAIT and the value labeled 'DTR Wait:' in the PORT ALTERNATE CHARACTERISTICS display. This object is not available on units that do not support modem signals (ie 2220).
OBJECT-TYPE    
  INTEGER always(1), onConnectionOrRing(2), onConnection(3), onRing(4)  

basicSerialPortLimitedCommands 1.3.6.1.4.1.33.13.1.18.1.18
Control for limiting the commands available to the user on the port. Corresponds directly to PORT SECURITY and the presence of the label 'Security' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. This object is not available on units that do not support modem signals (ie 2220).
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortLimitedView 1.3.6.1.4.1.33.13.1.18.1.19
Control for restricting what a user may display. Corresponds directly to PORT LIMITED VIEW and the presence of the label 'Limited View' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortPassword 1.3.6.1.4.1.33.13.1.18.1.20
Control for requiring the user to supply the login password to log in on the port. Corresponds directly to PORT PASSWORD and the presence of the label 'Password' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortLineEditor 1.3.6.1.4.1.33.13.1.18.1.21
Control for allowing the user to use local mode command line editing. Corresponds directly to PORT LINE EDITOR and the presence of the label 'Line Editor' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortLineEditorBackspace 1.3.6.1.4.1.33.13.1.18.1.22
Character input from the character port to move the cursor to the left. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR BACKSPACE and the value labeled 'Backspace Character:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicSerialPortLineEditorBeginning 1.3.6.1.4.1.33.13.1.18.1.23
Character input from the character port to move the cursor to the beginning of the line. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR BEGINNING and the value labeled 'Begin Line Character:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicSerialPortLineEditorCancel 1.3.6.1.4.1.33.13.1.18.1.24
Character input from the character port to cancel an interactive dialog or delete the current line. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR CANCEL and the value labeled 'Cancel Character:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicSerialPortLineEditorDeleteBeginning 1.3.6.1.4.1.33.13.1.18.1.25
Character input from the character port to delete the current line from the cursor to the beginning. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR DELETE BEGINNING and the value labeled 'Delete Begin Character:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicSerialPortLineEditorDeleteLine 1.3.6.1.4.1.33.13.1.18.1.26
Character input from the character port to delete the current line. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR DELETE LINE and the value labeled 'Delete Line Character:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicSerialPortLineEditorEnd 1.3.6.1.4.1.33.13.1.18.1.27
Character input from the character port to move the cursor to the end of the line. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR END and the value labeled 'End of Line Character:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicSerialPortLineEditorForward 1.3.6.1.4.1.33.13.1.18.1.28
Character input from the character port to move the cursor to the right. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR FORWARDS and the value labeled 'Forwards Character:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicSerialPortLineEditorInsertToggle 1.3.6.1.4.1.33.13.1.18.1.29
Character input from the character port to toggle between insert and overwrite modes. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR INSERT TOGGLE and the value labeled 'Insert Character:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicSerialPortLineEditorNextLine 1.3.6.1.4.1.33.13.1.18.1.30
Character input from the character port to recall the next, newer line in the command history. The value -1 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR NEXT LINE and the value labeled 'Next Line Character:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicSerialPortLineEditorPreviousLine 1.3.6.1.4.1.33.13.1.18.1.31
Character input from the character port to recall the previous, older line in the command history. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR PREVIOUS LINE and the value labeled 'Previous Line Character:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicSerialPortLineEditorQuotingCharacter 1.3.6.1.4.1.33.13.1.18.1.32
Character input from the character port to inhibit interpretation of the next input character. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR QUOTING CHARACTER and the value labeled 'Quoting Character:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicSerialPortLineEditorRedisplay 1.3.6.1.4.1.33.13.1.18.1.33
Character input from the character port to redisplay the current command line. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR REDISPLAY CHARACTER and the value labeled 'Redisplay Character:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..255  

basicSerialPortQuadartReceiveDiscard 1.3.6.1.4.1.33.13.1.18.1.34
Control for discard of received errors from quadart hardware.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortAPDProtocols 1.3.6.1.4.1.33.13.1.18.1.35
A bit map that specifies the protocols that this port will attempt to detect using the Auto Protocol Detection function. The bit numbers for the protocols are: 1;ARAP, 3;Interactive, 4;SLIP, 5;PPP. Bits 6-16 are reserved for future use. More than one of these protocols may be ORed together. The default is 0 (zero) no protocols.
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

basicSerialPortAPDTimeout 1.3.6.1.4.1.33.13.1.18.1.36
A time value, in seconds, that specifies how long the port will attempt to determine which protocol is coming into the port. When basicSerialPortAPDTimeout seconds have expired, the port will assume the protocol to use is that specified by basicSerialPortAPDDefaultProtocol. A value of 0 (zero provides an unlimited timeout.
OBJECT-TYPE    
  INTEGER 0..255  

basicSerialPortAPDDefaultProtocol 1.3.6.1.4.1.33.13.1.18.1.37
A bit map that specifies the protocol that this port will use when the time specified by basicSerialPortAPDTimeout has expired without sucessfully identifying the incoming porotocol. The bit numbers for the protocols are: None;Logout the port, 1;ARAP, 2;CSLIP, 3;Interactive, 4;SLIP, 5;PPP. Bits 6-16 are reserved for future use. Only one protocol may be specified for this object
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

basicSerialPortUsernameCharSet 1.3.6.1.4.1.33.13.1.18.1.38
A control, that if set to seven-bit, will allow only the ASCII printable characters in the range SP (X20) to ~ (X7E) in the username field. A value of none allows any character
OBJECT-TYPE    
  INTEGER none(1), seven-bit(2)  

basicSerialPortAutoHangup 1.3.6.1.4.1.33.13.1.18.1.39
A control that, if enabled, will cause the port to be logged off when the last session on that port is destroyed
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortCommandSize 1.3.6.1.4.1.33.13.1.18.1.40
Maximum number of input characters to hold in the command buffer. Corresponds directly to the PORT COMMAND SIZE and the value labeled 'Command Size:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 80..16384  

basicSerialPortAutoProtocolDetectPrompt 1.3.6.1.4.1.33.13.1.18.1.41
Controls whether to send the basicAutoProtocolDetectMessage out the serial port at the beginning of auto protocol detection mode. Corresponds to the value labeled 'APD Prompt' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortUsernamePrompt 1.3.6.1.4.1.33.13.1.18.1.42
The text string used to prompt for a user's name. Corresponds directly to the value labeled 'Username Prompt:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  DisplayString SIZE(0..25)  

basicSerialPortPasswordPrompt 1.3.6.1.4.1.33.13.1.18.1.43
The text string used to prompt for a user's password. Corresponds directly to the value labeled 'Password Prompt:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  DisplayString SIZE(0..25)  

basicSerialPortAutoProtocolDetectSecurityInteractiveOnly 1.3.6.1.4.1.33.13.1.18.1.44
Controls whether Auto Protocol Detect (APD) authentication applies only to interactive users, and not to other APD protocols such as PPP. Corresponds directly to the value labeled 'APD Authentication Interactive Only:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortDedicatedUserData 1.3.6.1.4.1.33.13.1.18.1.45
The text string to send at the beginning of a connection to a Telnet dedicated service. Corresponds to the value labeled 'UserData:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

basicSerialPortIpAutoDiscovery 1.3.6.1.4.1.33.13.1.18.1.47
Control to enable a non-standard method of acquiring the IP address after boot completes via the BOOTP protocol. Corresponds to the value labeled 'IP Address Auto Discovery' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortDedicatedKickStartData 1.3.6.1.4.1.33.13.1.18.1.48
A text string which is used to compare at login time to incoming serial data. A match will initiate a telnet session to a dedicated service. Corresponds to the value labeled 'KickStart:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

basicSerialPortBreakLength 1.3.6.1.4.1.33.13.1.18.1.50
Specifies the duration in milliseconds of a remote serial break which is sent via the Telnet Break command. Corresponds directly to the value labeled 'Break Length:' in the PORT CHARACTERISTIC display.
OBJECT-TYPE    
  INTEGER ms250(1), ms500(2), ms750(3)  

basicSerialPortRotaryRoundRobin 1.3.6.1.4.1.33.13.1.18.1.51
Controls whether a port which participates in an internet rotary is selected in round robin or fixed priority order. Corresponds directly to the value labeled 'Round Robin search:' in the SERVER INTERNET ROTARY display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortWelcomeBeforeAuthentication 1.3.6.1.4.1.33.13.1.18.1.52
Control to display the basicWelcome message prior to authenticating the user. Corresponds to the presence of the value 'Welcome-Banner-Pre-Authentication' following the label 'Enabled Characteristics' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortGatewayAutoDiscovery 1.3.6.1.4.1.33.13.1.18.1.53
Control to enable a non-standard method of acquiring the gateway address after boot completes via the bootp protocol.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortSubnetAutoDiscovery 1.3.6.1.4.1.33.13.1.18.1.54
Control to enable a non-standard method of acquiring the subnet mask after boot completes via the bootp protocol.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortRaiseLowerDtr 1.3.6.1.4.1.33.13.1.18.1.55
A control to to raise or lower the DTR signal from this port by setting it to high or low, respectively. This request will have no effect unless basicSerialPortRaiseControlDtr is enabled. In response to a get-request or get-next-request the agent always returns low for this object.
OBJECT-TYPE    
  INTEGER low(1), high(2)  

basicSerialPortRaiseControlDtr 1.3.6.1.4.1.33.13.1.18.1.56
Controls the ability to change the state of DTR using basicSerialPortRaiseLowerDTR. This characteristic is not intended for use with modem ports. Corresponds directly to the presence of 'Control DTR' under the label 'Enabled Characteristics' in the PORT CHARACTERISTICS display. The desired change will not take effect until the port is logged off.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicSerialPortIpConfigureBootp 1.3.6.1.4.1.33.13.1.18.1.57
Control to use the BOOTP protocol upon startup to learn the unit's own internet address, subnet mask, primary and secondary gateway servers, domain name servers, time server and domain name. This object was moved to the MRV-IN-REACH-INTERNET-MIB for InReach agent software version V2.4.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicConsoleLogoutDisconnect 1.3.6.1.4.1.33.13.1.19
Control for automatic session disconnection when a console port user logs out. Corresponds directly to SERVER CONSOLE LOGOUT and the presence of the label 'Console Logout' following the label 'Enabled Characteristics:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicControlledPorts 1.3.6.1.4.1.33.13.1.20
Status of Controlled Ports feature. Corresponds directly to the 'Controlled Ports' following the label 'Enabled Characteristics:' in the SERVER CHARACTERISTICS display. Enabling this feature causes strings of control characters to be sent out on a port upon starting and/or stopping a session
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortSessionTable 1.3.6.1.4.1.33.13.1.21
A list of port session entries.
OBJECT-TYPE    
  SEQUENCE OF  
    BasicPortSessEntry

basicPortSessEntry 1.3.6.1.4.1.33.13.1.21.1
Status and parameter values for a basic port session.
OBJECT-TYPE    
  BasicPortSessEntry  

basicPortPortIndex 1.3.6.1.4.1.33.13.1.21.1.1
The value of basicPortIndex for the port to which this session belongs. The port identified by a particular value of this index is the same port as identified by charPortIndex in the standard Character MIB.
OBJECT-TYPE    
  INTEGER  

basicPortSessIndex 1.3.6.1.4.1.33.13.1.21.1.2
The session index in the context of the port, a non-zero positive integer. Session indexes within a port need not be sequential. Session indexes may be reused for different ports. For example, port 1 and port 3 may both have a session 2 at the same time. Session indexes may have any valid integer value, with any meaning convenient to the agent implementation. The session identified by a particular value of this index is the same session as identified by charSessIndex in the standard Character MIB.
OBJECT-TYPE    
  INTEGER  

basicSessControlled 1.3.6.1.4.1.33.13.1.21.1.3
A control to send preconfigured controlled port session strings out the serial port when entering or exiting this session. Corresponds directly to the value labeled 'Controlled' under the Service Mode header in the SESSION display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPortSessEncryption 1.3.6.1.4.1.33.13.1.22
Status of the default encryption value to be set for each session. Corresponds directly to Console Security on SHOW SERVER screen.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicTemperatureUnits 1.3.6.1.4.1.33.13.1.23
Indicates the units of measurement for the temperature sensors.
OBJECT-TYPE    
  INTEGER fahrenheit(1), celcius(2)  

basicEnvironmentalManagerCircuitBreaker 1.3.6.1.4.1.33.13.1.24
Indicates whether the circuit breaker is activated.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicContactClosureOrAlarmInputTable 1.3.6.1.4.1.33.13.1.25
Information about contact closures or alarm inputs.
OBJECT-TYPE    
  SEQUENCE OF  
    BasicContactClosureOrAlarmInputEntry

basicContactClosureOrAlarmInputEntry 1.3.6.1.4.1.33.13.1.25.1
An entry in the basicContactClosureOrAlarmInputTable.
OBJECT-TYPE    
  BasicContactClosureOrAlarmInputEntry  

basicContactClosureOrAlarmInputValue 1.3.6.1.4.1.33.13.1.25.1.1
Indicates the state of the contact closure or alarm input.
OBJECT-TYPE    
  INTEGER open(1), closed(2)  

basicContactClosureOrAlarmInputName 1.3.6.1.4.1.33.13.1.25.1.2
The name used to identify this contact closure or alarm input.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicContactClosureOrAlarmInputTrapEnable 1.3.6.1.4.1.33.13.1.25.1.3
Control to send trap when contact closure or alarm input changes state.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicContactClosureOrAlarmInputFaultSeverity 1.3.6.1.4.1.33.13.1.25.1.4
Control to determine the severity level associated with the trap sent out when a fault occurs for a given contact closure or alarm input.
OBJECT-TYPE    
  INTEGER indeterminate(2), warning(3), minor(4), major(5), critical(6)  

basicContactClosureOrAlarmInputFaultState 1.3.6.1.4.1.33.13.1.25.1.5
Control to indicate which state, open or closed, represents the fault condition. The other state is the cleared condition.
OBJECT-TYPE    
  INTEGER open(1), closed(2)  

basicContactClosureOrAlarmInputStatus 1.3.6.1.4.1.33.13.1.25.1.6
Indicates the current status of the contact closure or alarm input. If the basicContactClosureOrAlarmInputValue matches the fault state, then the status is equal to the fault severity. Otherwise the status is cleared.
OBJECT-TYPE    
  INTEGER cleared(1), indeterminate(2), warning(3), minor(4), major(5), critical(6)  

basicContactClosureOrAlarmInputZone 1.3.6.1.4.1.33.13.1.25.1.7
The name used to identify the zone where the equipment resides.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicContactClosureOrAlarmInputRelatedEquipment 1.3.6.1.4.1.33.13.1.25.1.8
The name used to identify related equipment.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicContactClosureOrAlarmInputSiteId 1.3.6.1.4.1.33.13.1.25.1.9
The name used to identify the site where the unit resides.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicContactClosureOrAlarmInputIndex 1.3.6.1.4.1.33.13.1.25.1.10
An index which uniquely identifies the contact closure or alarm input.
OBJECT-TYPE    
  INTEGER  

basicContactClosureOrAlarmInputManufacturer 1.3.6.1.4.1.33.13.1.25.1.11
The name used to identify the manufacturer of this equipment.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicContactClosureOrAlarmInputModel 1.3.6.1.4.1.33.13.1.25.1.12
The model name of this equipment.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicPowerOutletTable 1.3.6.1.4.1.33.13.1.26
Information about Environmental Manager Power Outlets.
OBJECT-TYPE    
  SEQUENCE OF  
    BasicPowerOutletEntry

basicPowerOutletEntry 1.3.6.1.4.1.33.13.1.26.1
An entry in the basicPowerOutletTable.
OBJECT-TYPE    
  BasicPowerOutletEntry  

basicPowerOutletOnOff 1.3.6.1.4.1.33.13.1.26.1.1
Controls turning on or off the power for the device connected to this power outlet.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

basicPowerOutletReboot 1.3.6.1.4.1.33.13.1.26.1.2
Controls rebooting of the device attached this power outlet.
OBJECT-TYPE    
  INTEGER 1..1  

basicPowerOutletName 1.3.6.1.4.1.33.13.1.26.1.3
A name used to identify this power outlet.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

basicPowerOutletRedundant 1.3.6.1.4.1.33.13.1.26.1.4
Controls whether power outlets in bank A have redundant outlets in bank B. When enabled, powering on an outlet in bank A will simultaneously power on the corresponding outlet number in bank B.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPowerOutletConsoleName 1.3.6.1.4.1.33.13.1.26.1.5
A name used to identify a console port on a unit with power outlet managment.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

basicPowerOutletHighCurrent 1.3.6.1.4.1.33.13.1.26.1.6
A control to indicate a high current unit is attached to this power outlet. When enabled the high current unit will provide current when it detects no power from the power outlet; and will stop the current when the outlet resumes power. This control only works on those InReach devices which support the high current unit such as the IRMGR0. Corresponds directly to the value labeled 'HCNC Setting' in the INREACH MANAGER OUTLET STATUS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicPowerOutletIndex 1.3.6.1.4.1.33.13.1.26.1.10
An index which uniquely identifies a power outlet.
OBJECT-TYPE    
  INTEGER  

basicTemperatureHumiditySensor 1.3.6.1.4.1.33.13.1.27
OBJECT IDENTIFIER    

basicTemperatureSensorTable 1.3.6.1.4.1.33.13.1.27.1
Information about Environmental Manager Temperature Sensors.
OBJECT-TYPE    
  SEQUENCE OF  
    BasicTemperatureSensorEntry

basicTemperatureSensorEntry 1.3.6.1.4.1.33.13.1.27.1.1
An entry in the basicTemperatureSensorTable.
OBJECT-TYPE    
  BasicTemperatureSensorEntry  

basicTempTrapHighThreshold 1.3.6.1.4.1.33.13.1.27.1.1.1
The temperature at or above which a sensorThresholdTrap is generated.
OBJECT-TYPE    
  INTEGER  

basicTempTrapLowThreshold 1.3.6.1.4.1.33.13.1.27.1.1.2
The temperature at or below which a sensorThresholdTrap is generated.
OBJECT-TYPE    
  INTEGER  

basicTemperatureSensor 1.3.6.1.4.1.33.13.1.27.1.1.3
Controls the enabling or disabling of a temperature sensor.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicTemperatureValue 1.3.6.1.4.1.33.13.1.27.1.1.4
The current temperature reading for this sensor.
OBJECT-TYPE    
  INTEGER  

basicTemperatureAlarmSeverity 1.3.6.1.4.1.33.13.1.27.1.1.5
Control to determine the severity level associated with the trap sent out when the temperature reading is out-of-bounds.
OBJECT-TYPE    
  INTEGER indeterminate(2), warning(3), minor(4), major(5), critical(6)  

basicTemperatureAlarmStatus 1.3.6.1.4.1.33.13.1.27.1.1.6
Indicates the current status of the temperature sensor. If the basicTemperatureValue falls within the normal range, the status is cleared. Otherwise the status matches the alarm severity level.
OBJECT-TYPE    
  INTEGER cleared(1), indeterminate(2), warning(3), minor(4), major(5), critical(6)  

basicTemperatureHumiditySensorName 1.3.6.1.4.1.33.13.1.27.1.1.7
The name used to identify this temperature sensor.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicTemperatureSensorIndex 1.3.6.1.4.1.33.13.1.27.1.1.10
An index which uniquely identifies a temperature sensor.
OBJECT-TYPE    
  INTEGER  

basicHumiditySensorTable 1.3.6.1.4.1.33.13.1.27.2
Information about Environmental Manager Humidity Sensors.
OBJECT-TYPE    
  SEQUENCE OF  
    BasicHumiditySensorEntry

basicHumiditySensorEntry 1.3.6.1.4.1.33.13.1.27.2.1
An entry in the basicHumiditySensorTable.
OBJECT-TYPE    
  BasicHumiditySensorEntry  

basicHumidityTrapHighThreshold 1.3.6.1.4.1.33.13.1.27.2.1.1
The humidity at or above which a sensorThresholdTrap is generated.
OBJECT-TYPE    
  INTEGER  

basicHumidityTrapLowThreshold 1.3.6.1.4.1.33.13.1.27.2.1.2
The humidity at or below which a sensorThresholdTrap is generated.
OBJECT-TYPE    
  INTEGER  

basicHumiditySensor 1.3.6.1.4.1.33.13.1.27.2.1.3
Controls the enabling or disabling of a humidity sensor.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicHumidityValue 1.3.6.1.4.1.33.13.1.27.2.1.4
The current humidity reading for this sensor.
OBJECT-TYPE    
  INTEGER  

basicHumidityAlarmSeverity 1.3.6.1.4.1.33.13.1.27.2.1.5
Control to indicate the severity level associated with the trap sent out when the humidity reading is out-of-bounds.
OBJECT-TYPE    
  INTEGER indeterminate(2), warning(3), minor(4), major(5), critical(6)  

basicHumidityAlarmStatus 1.3.6.1.4.1.33.13.1.27.2.1.6
Indicates the current status of the humidity sensor. If the basicHumidityValue falls within the normal range, the status is cleared. Otherwise the status matches the alarm severity level.
OBJECT-TYPE    
  INTEGER cleared(1), indeterminate(2), warning(3), minor(4), major(5), critical(6)  

basicHumiditySensorIndex 1.3.6.1.4.1.33.13.1.27.2.1.10
An index which uniquely identifies a humidity sensor.
OBJECT-TYPE    
  INTEGER  

basicControlSignalTable 1.3.6.1.4.1.33.13.1.28
Information about Environmental Manager Control Signal points.
OBJECT-TYPE    
  SEQUENCE OF  
    BasicControlSignalEntry

basicControlSignalEntry 1.3.6.1.4.1.33.13.1.28.1
An entry in the basicControlSignalTable.
OBJECT-TYPE    
  BasicControlSignalEntry  

basicControlSignalValue 1.3.6.1.4.1.33.13.1.28.1.1
Sets and reads the state of the control signal point.
OBJECT-TYPE    
  INTEGER high(1), low(2)  

basicControlSignalIndex 1.3.6.1.4.1.33.13.1.28.1.10
An index which uniquely identifies a control signal point.
OBJECT-TYPE    
  INTEGER  

basicPowerAlarmTimer 1.3.6.1.4.1.33.13.1.29
The polling interval in seconds for the fuse and power supply status. An alarm trap is issued on power failure.
OBJECT-TYPE    
  INTEGER 1..60  

basicControlOutputTable 1.3.6.1.4.1.33.13.1.30
Information about controlled output distribution points.
OBJECT-TYPE    
  SEQUENCE OF  
    BasicControlOutputEntry

basicControlOutputEntry 1.3.6.1.4.1.33.13.1.30.1
An entry in the basicControlOutputTable.
OBJECT-TYPE    
  BasicControlOutputEntry  

basicControlOutputSignalDtrRts 1.3.6.1.4.1.33.13.1.30.1.1
Controls the raising or lowering of a signal on a distribution control signal point. The signal is DTR when the basicControlOutputIndex is odd, or RTS when the basicControlOutputIndex is even.
OBJECT-TYPE    
  INTEGER low(1), high(2)  

basicControlOutputName 1.3.6.1.4.1.33.13.1.30.1.2
The name used to identify this distribution control signal point.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicControlOutputIndex 1.3.6.1.4.1.33.13.1.30.1.10
An index which uniquely identifies a distribution control signal point.
OBJECT-TYPE    
  INTEGER  

basicPowerStatusFuseA 1.3.6.1.4.1.33.13.1.31
Indicates the status of fuse bank A.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

basicPowerStatusFuseB 1.3.6.1.4.1.33.13.1.32
Indicates the status of fuse bank B.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

basicPowerSupplyStatusA 1.3.6.1.4.1.33.13.1.33
Indicates the status of power supply A.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

basicPowerSupplyStatusB 1.3.6.1.4.1.33.13.1.34
Indicates the status of power supply B.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

basicPortTrapTable 1.3.6.1.4.1.33.13.1.35
A list of traps associated with signal control changes on ports.
OBJECT-TYPE    
  SEQUENCE OF  
    BasicPortTrapEntry

basicPortTrapEntry 1.3.6.1.4.1.33.13.1.35.1
Administrative status of signal change traps for a hardware port.
OBJECT-TYPE    
  BasicPortTrapEntry  

basicPortTrapIndex 1.3.6.1.4.1.33.13.1.35.1.1
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by rs232PortIndex in the standard rs232 MIB.
OBJECT-TYPE    
  INTEGER  

basicPortSignalName 1.3.6.1.4.1.33.13.1.35.1.2
Identification of the hardware signal as specified in RFC1659 as follows: rts Request to Send cts Clear to Send dsr Data Set Ready dts Data Terminal Ready ri Ring Indicator dcd Received Line Signal Detector Some agents do not support DSR since its pin is shared with DCD.
OBJECT-TYPE    
  INTEGER rts(1), cts(2), dsr(3), dtr(4), ri(5), dcd(6)  

basicPortTrapStatus 1.3.6.1.4.1.33.13.1.35.1.3
Control to toggle the sending of a trap on a specific signal change on a physical port. One must logout the port prior to this taking effect.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicAlarmMasterInputTable 1.3.6.1.4.1.33.13.1.36
Information about the high density alarm manager's alarm inputs.
OBJECT-TYPE    
  SEQUENCE OF  
    BasicAlarmMasterInputEntry

basicAlarmMasterInputEntry 1.3.6.1.4.1.33.13.1.36.1
An entry in the basicAlarmMasterInputTable.
OBJECT-TYPE    
  BasicAlarmMasterInputEntry  

basicAlarmMasterInputPort 1.3.6.1.4.1.33.13.1.36.1.1
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the standard Character MIB.
OBJECT-TYPE    
  INTEGER  

basicAlarmMasterInputSlot 1.3.6.1.4.1.33.13.1.36.1.2
An index value that uniquely identifies a slot of alarm points on a given high density alarm port.
OBJECT-TYPE    
  INTEGER  

basicAlarmMasterInputPoint 1.3.6.1.4.1.33.13.1.36.1.3
An index value that uniquely identifies an alarm point within an alarm slot on a high density alarm port.
OBJECT-TYPE    
  INTEGER  

basicAlarmMasterInputName 1.3.6.1.4.1.33.13.1.36.1.4
The name used to identify this alarm point.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicAlarmMasterInputTrapEnable 1.3.6.1.4.1.33.13.1.36.1.5
Control to send a trap when the alarm input changes state.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicAlarmMasterControlOutputSignal 1.3.6.1.4.1.33.13.1.36.1.6
Control to toggle the output signal for an alarm point.
OBJECT-TYPE    
  INTEGER open(1), closed(2)  

basicAlarmMasterInputEnable 1.3.6.1.4.1.33.13.1.36.1.7
Control to toggle whether this alarm point is active.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicAlarmMasterInputDebounceInterval 1.3.6.1.4.1.33.13.1.36.1.8
Amount of time in seconds to debounce a signal change before triggering an alarm.
OBJECT-TYPE    
  INTEGER 0..30  

basicAlarmMasterInputFaultSeverity 1.3.6.1.4.1.33.13.1.36.1.9
Control to determine the severity level associated with the trap sent out when a fault occurs for this alarm input point.
OBJECT-TYPE    
  INTEGER indeterminate(2), warning(3), minor(4), major(5), critical(6)  

basicAlarmMasterInputFaultState 1.3.6.1.4.1.33.13.1.36.1.10
Control to indicate which state, open or closed, represents the fault condition for this alarm input point. The other state is the cleared condition.
OBJECT-TYPE    
  INTEGER open(1), closed(2)  

basicAlarmMasterInputStatus 1.3.6.1.4.1.33.13.1.36.1.11
Indicates the current status of the alarm input point. If the basicAlarmMasterInputValue matches the fault state, then the status is equal to the fault severity. Otherwise the status is cleared.
OBJECT-TYPE    
  INTEGER cleared(1), indeterminate(2), warning(3), minor(4), major(5), critical(6)  

basicAlarmMasterInputValue 1.3.6.1.4.1.33.13.1.36.1.12
Indicates the current state of the alarm input point.
OBJECT-TYPE    
  INTEGER open(1), closed(2)  

basicAlarmMasterDisplay 1.3.6.1.4.1.33.13.1.36.1.13
Control to toggle the display of the alarm status for this point in the display window of the high density alarm unit.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

basicAlarmMasterInputZone 1.3.6.1.4.1.33.13.1.36.1.14
The name used to identify the zone where the equipment resides.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicAlarmMasterInputRelatedEquipment 1.3.6.1.4.1.33.13.1.36.1.15
The name used to identify related equipment.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicAlarmMasterInputSiteId 1.3.6.1.4.1.33.13.1.36.1.16
The name used to identify the site where the unit resides.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicAlarmMasterInputManufacturer 1.3.6.1.4.1.33.13.1.36.1.17
The name used to identify the manufacturer of this equipment.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicAlarmMasterInputModel 1.3.6.1.4.1.33.13.1.36.1.18
The model name of this equipment.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicPowerMasterOutletTable 1.3.6.1.4.1.33.13.1.37
Information about power master outlets.
OBJECT-TYPE    
  SEQUENCE OF  
    BasicPowerMasterOutletEntry

basicPowerMasterOutletEntry 1.3.6.1.4.1.33.13.1.37.1
An entry in the basicPowerMasterOutletTable.
OBJECT-TYPE    
  BasicPowerMasterOutletEntry  

basicPowerMasterPortIndex 1.3.6.1.4.1.33.13.1.37.1.1
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by the charPortIndex in the standard Character MIB.
OBJECT-TYPE    
  INTEGER  

basicPowerMasterOutletIndex 1.3.6.1.4.1.33.13.1.37.1.2
An index which uniquely identifies a power master outlet.
OBJECT-TYPE    
  INTEGER  

basicPowerMasterOutletName 1.3.6.1.4.1.33.13.1.37.1.3
The name used to identify this power master outlet.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicPowerMasterOutletState 1.3.6.1.4.1.33.13.1.37.1.4
Switches the power master outlet on or off. There may be a noticeable time delay while processing a get-request for this object. A response of 'off' to a get-request may indicate that the state is temporarily unavailable.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

basicPowerMasterOutletAmperageStatus 1.3.6.1.4.1.33.13.1.37.1.5
Indicates the current amperage drawn at this outlet. There may be a noticeable time delay while processing a get-request for this object. A null string indicates that amperage status is temporarily unavailable.
OBJECT-TYPE    
  DisplayString SIZE(0..5)  

basicControlOutputRelayTable 1.3.6.1.4.1.33.13.1.38
Information about controlled output relays.
OBJECT-TYPE    
  SEQUENCE OF  
    BasicControlOutputRelayEntry

basicControlOutputRelayEntry 1.3.6.1.4.1.33.13.1.38.1
An entry in the basicControlOutputRelayTable.
OBJECT-TYPE    
  BasicControlOutputRelayEntry  

basicControlOutputRelayIndex 1.3.6.1.4.1.33.13.1.38.1.1
An index which uniquely identifies a control output relay.
OBJECT-TYPE    
  INTEGER  

basicControlOutputRelayName 1.3.6.1.4.1.33.13.1.38.1.2
The name used to identify this control output relay.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

basicControlOutputRelayState 1.3.6.1.4.1.33.13.1.38.1.3
Controls the opening or closing of the control output relay.
OBJECT-TYPE    
  INTEGER open(1), close(2)  

basicControlOutputRelayStatus 1.3.6.1.4.1.33.13.1.38.1.4
Indicates the current status of the control output relay.
OBJECT-TYPE    
  INTEGER open(1), close(2)  

basicAutoProtocolDetectMessage 1.3.6.1.4.1.33.13.1.100
The text string sent as a prompt message out the port at the beginning of auto protocol detection mode. Corresponds to the value labeled 'APD Message' in the SERVER UNIT display.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

xQueue 1.3.6.1.4.1.33.13.2
OBJECT IDENTIFIER    

queueLimit 1.3.6.1.4.1.33.13.2.1
The maximum number of entries that can be made in the Queue table. The value -1 indicates the imit is available memory. Corresponds directly to SERVER QUEUE LIMIT and the value labeled 'Queue Limit:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER -1..100  

queueHigh 1.3.6.1.4.1.33.13.2.2
The highest value of queueNumber since system initialization. Corresponds directly to the value labeled 'Queue Entries' and 'High' in the SERVER STATUS display.
OBJECT-TYPE    
  Gauge  

queueNumber 1.3.6.1.4.1.33.13.2.3
The number of entries in the Queue table. Corresponds directly to the value labeled 'Queue Entries' and 'Cur' in the SERVER STATUS display.
OBJECT-TYPE    
  Gauge  

queueTable 1.3.6.1.4.1.33.13.2.4
A list of queue entries.
OBJECT-TYPE    
  SEQUENCE OF  
    QueueEntry

queueEntry 1.3.6.1.4.1.33.13.2.4.1
Parameter values for a queue entry.
OBJECT-TYPE    
  QueueEntry  

queueJob 1.3.6.1.4.1.33.13.2.4.1.1
The job number of a queued request. Corresponds directly to the value labeled 'Entry' in the QUEUE display.
OBJECT-TYPE    
  INTEGER  

queueStatus 1.3.6.1.4.1.33.13.2.4.1.2
The status of a queue entry. Set to 'invalid' to remove the entry, which corresponds directly to the REMOVE QUEUE ENTRY command. Actual removal of the entry is implementation specific.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

queueSourceName 1.3.6.1.4.1.33.13.2.4.1.3
The name of the system that originated the queue entry. Corresponds directly to the value labeled 'Source Node' in the QUEUE display.
OBJECT-TYPE    
  DisplayString SIZE(0..50)  

queueServiceName 1.3.6.1.4.1.33.13.2.4.1.4
The name of the service for which the originator is waiting. Corresponds directly to the value labeled 'Service' in the QUEUE display.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

queueServicePortIndex 1.3.6.1.4.1.33.13.2.4.1.5
The charPortIndex of the port for which the originator is waiting, if supplied by the originator. As defined in the standard Character MIB. Corresponds indirectly to the port number part of the value labeled 'Port Name' in the QUEUE display.
OBJECT-TYPE    
  INTEGER  

queueServicePortName 1.3.6.1.4.1.33.13.2.4.1.6
The name of the port for which the originator is waiting, if supplied by the originator. Corresponds directly to the port name part of the value labeled 'Port Name' in the SERVER QUEUE display.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

queuePortTable 1.3.6.1.4.1.33.13.2.5
A list of queuing-related character port entries.
OBJECT-TYPE    
  SEQUENCE OF  
    QueuePortEntry

queuePortEntry 1.3.6.1.4.1.33.13.2.5.1
Queuing parameter values for a port.
OBJECT-TYPE    
  QueuePortEntry  

queuePortIndex 1.3.6.1.4.1.33.13.2.5.1.1
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the standard Character MIB.
OBJECT-TYPE    
  INTEGER  

queuePortQueuing 1.3.6.1.4.1.33.13.2.5.1.2
Control for allowing queued requests for using the port. Corresponds directly to PORT QUEUING and the presence of the label 'Queuing' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

xMenu 1.3.6.1.4.1.33.13.3
OBJECT IDENTIFIER    





















xNetLogin 1.3.6.1.4.1.33.13.4
OBJECT IDENTIFIER    

netLoginNumber 1.3.6.1.4.1.33.13.4.1
The number of entries in the Network Login Server table.
OBJECT-TYPE    
  INTEGER  

netLoginServerTable 1.3.6.1.4.1.33.13.4.2
A list of network login server entries.
OBJECT-TYPE    
  SEQUENCE OF  
    NetLoginServerEntry

netLoginServerEntry 1.3.6.1.4.1.33.13.4.2.1
Network login parameter values for a server entry.
OBJECT-TYPE    
  NetLoginServerEntry  

netLoginServerName 1.3.6.1.4.1.33.13.4.2.1.1
The name of a network login server, suitable for resolution to a network address. Corresponds directly to host portion of SERVER SCRIPT SERVER and the value labeled 'Script Host' in the SERVER PARAMETER SERVER display.
OBJECT-TYPE    
  DisplayString SIZE(1..50)  

netLoginServerStatus 1.3.6.1.4.1.33.13.4.2.1.2
Status of this entry. Set to 'invalid' to remove the entry, which corresponds directly to the CLEAR SERVER SCRIPT SERVER command. Actual removal of the entry is implementation specific.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

netLoginServerPath 1.3.6.1.4.1.33.13.4.2.1.3
The full path name to the script file that is identified by the user name. Corresponds directly to path portion of SERVER SCRIPT SERVER and the value labeled 'Script Path' in the SERVER PARAMETER SERVER display. Defaults to the NULL string when a new entry is created.
OBJECT-TYPE    
  DisplayString SIZE(0..40)  

netLoginServerSeparator 1.3.6.1.4.1.33.13.4.2.1.4
The single character string that will be inserted between the components of a file's path on the script server. Defaults to the NULL string when a new entry is created. Corresponds directly to the separator portion of SERVER SCRIPT SERVER display.
OBJECT-TYPE    
  DisplayString SIZE(0..1)  

netLoginPortTable 1.3.6.1.4.1.33.13.4.3
A list of network login character port entries.
OBJECT-TYPE    
  SEQUENCE OF  
    NetLoginPortEntry

netLoginPortEntry 1.3.6.1.4.1.33.13.4.3.1
Network login parameter values for a port.
OBJECT-TYPE    
  NetLoginPortEntry  

netLoginPortIndex 1.3.6.1.4.1.33.13.4.3.1.1
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the standard Character MIB.
OBJECT-TYPE    
  INTEGER  

netLoginPortScriptUse 1.3.6.1.4.1.33.13.4.3.1.2
Control for the script action taken when a user logs in on the port. Corresponds directly to PORT SCRIPT LOGIN and the value labeled 'Script Login:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2), required(3)  

netLoginPortScriptEcho 1.3.6.1.4.1.33.13.4.3.1.3
Control for display of script operation on the port when running a script. Corresponds directly to PORT SCRIPT ECHO and the presence of the label 'Script Echo' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

netLoginPortLoaderAddressType 1.3.6.1.4.1.33.13.4.3.1.4
The type of network address contained in netLoginPortLoaderAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'ip' is an Internet IP address. 'ethernet' is an 802.3 MAC address. Corresponds indirectly to the address part of the value labeled 'Script Loaded From:' in the PORT STATUS display.
OBJECT-TYPE    
  AddressType  

netLoginPortLoaderAddress 1.3.6.1.4.1.33.13.4.3.1.5
The network address of the server that provided the script for the current port login. Corresponds directly the address part of the value labeled 'Script Loaded From:' in the PORT STATUS display.
OBJECT-TYPE    
  OCTET STRING  

netLoginPortLoaderFile 1.3.6.1.4.1.33.13.4.3.1.6
The path and file name of the script used for the current port login. Corresponds directly the file name part of the value labeled 'Script Loaded From:' in the PORT STATUS display.
OBJECT-TYPE    
  DisplayString  

netLoginPortExecuteFile 1.3.6.1.4.1.33.13.4.3.1.7
The path and file name of a script to be executed immediately on the port. Corresponds directly the file name in the SCRIPT command.
OBJECT-TYPE    
  DisplayString SIZE(0..40)  

xDial 1.3.6.1.4.1.33.13.5
OBJECT IDENTIFIER    

dialPortTable 1.3.6.1.4.1.33.13.5.1
A list of dial character port entries.
OBJECT-TYPE    
  SEQUENCE OF  
    DialPortEntry

dialPortEntry 1.3.6.1.4.1.33.13.5.1.1
Dial parameter values for a port.
OBJECT-TYPE    
  DialPortEntry  

dialPortIndex 1.3.6.1.4.1.33.13.5.1.1.1
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the standard Character MIB.
OBJECT-TYPE    
  INTEGER  

dialPortDialback 1.3.6.1.4.1.33.13.5.1.1.2
Control for use of dialback when a user logs in on the port. Corresponds directly to PORT DIALBACK and the presence of the label 'Dialback' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

dialPortDialbackTimeout 1.3.6.1.4.1.33.13.5.1.1.3
The number of seconds to wait for remote modem response when dialing back. Corresponds directly to PORT DIALBACK TIMEOUT and the value labeled 'Dialback Timeout:' in the PORT ALTERNATE CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 5..60  

dialPortDialout 1.3.6.1.4.1.33.13.5.1.1.4
A control to determine the state of a remote port after it has been logged out from the remote side of the connection. none will log out the port, query will ask user what to do, slip and ppp will revert to those protocols
OBJECT-TYPE    
  INTEGER none(1), query(2), slip(3), ppp(4)  

dialPortDialbackNoUsername 1.3.6.1.4.1.33.13.5.1.1.5
Control which when enabled on a dialback port will not prompt for a username upon dialing back. Instead the original username is reused.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

xSessionLog 1.3.6.1.4.1.33.13.6
OBJECT IDENTIFIER    

sessionLogLimit 1.3.6.1.4.1.33.13.6.1
The maximum number of entries allowed in the Session Log table. Corresponds directly to SERVER ACCOUNTING ENTRIES and the value labeled 'Accounting Entries:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER 0..1000  

sessionLogTable 1.3.6.1.4.1.33.13.6.2
A list of session log entries.
OBJECT-TYPE    
  SEQUENCE OF  
    SessionLogEntry

sessionLogEntry 1.3.6.1.4.1.33.13.6.2.1
Parameter values for a session log entry.
OBJECT-TYPE    
  SessionLogEntry  

sessionLogIndex 1.3.6.1.4.1.33.13.6.2.1.1
The index number of a session log entry. Corresponds directly to the order of the displayed records in the SERVER ACCOUNTING display. The maximum value is sessionLogLimit.
OBJECT-TYPE    
  INTEGER  

sessionLogConnectionID 1.3.6.1.4.1.33.13.6.2.1.2
An indentifying number for records relating to the same connection, that is, the connect and disconnect records, either of which can be missing. Corresponds directly to value labeled 'Entry' the SERVER ACCOUNTING display.
OBJECT-TYPE    
  INTEGER 1..65535  

sessionLogPort 1.3.6.1.4.1.33.13.6.2.1.3
An index value that uniquely identifies the port where the event took place. The port identified by a particular value of this index is the same port as identified by charPortIndex in the standard Character MIB. Corresponds directly to the value labeled 'Port' in the SERVER ACCOUNTING display.
OBJECT-TYPE    
  INTEGER  

sessionLogEvent 1.3.6.1.4.1.33.13.6.2.1.4
The type of event. Corresponds directly to the alphabetic part of the value labeled 'Type' in the SERVER ACCOUNTING display. Type 15 is used by internal processes that call the session log function with an already formatted message.
OBJECT-TYPE    
  INTEGER login(1), connectLocal(2), connectRemote(3), disconnect(4), rCPConnect(5), rCPDisconnect(6), x25Connect(13), x25Disconnect(14), processDefined(15)  

sessionLogEventDetail 1.3.6.1.4.1.33.13.6.2.1.5
The detailed reason for the event. Corresponds directly to the numeric part of the value labeled 'Type' in the SERVER ACCOUNTING display.
OBJECT-TYPE    
  INTEGER none(1), protocolBadCircuit(2), protocolBadCredits(3), protocolBadStartOrRun(4), protocolBadRange(5), duplicateQueueID(6), noUsers(7), noServiceResourced(8), serviceUserDisconnect(9), serviceUnavailable(10), serverUserDisconnect(11), noNodeResources(12), systemShutdown(13), nodeUserdisconnect(14), badCircuitTimer(15), badServiceClass(16), badMessageOrSlot(17), timeout(18), noProgress(19), serviceNotOnPort(20), noSuchPort(21), badPassword(22), serviceBusy(23), noSuchService(24), serviceDisabled(25), notInQueue(26), noImmeditatAccess(27), accessDenied(28), protocolBadSolicit(29), protocolBadReasonCode(30), unsupportedTest(31), domainTooLong(32), noSuchNode(33), noSuchServiceOnNode(34), rejectService(35), internetConnectDisabled(36)  

sessionLogUserName 1.3.6.1.4.1.33.13.6.2.1.6
The user name logged in on the port when the event occurred. Corresponds directly to the value labeled 'Username' in the SERVER ACCOUNTING display.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

sessionLogRemoteName 1.3.6.1.4.1.33.13.6.2.1.7
The name of the session remote partner. Corresponds directly to the value labeled 'Destination' in the SERVER ACCOUNTING display.
OBJECT-TYPE    
  DisplayString SIZE(0..17)  

sessionLogConnectTime 1.3.6.1.4.1.33.13.6.2.1.8
The date and time that session connection occurred. Corresponds directly to the value labeled 'Connect Time' in the SERVER ACCOUNTING display.
OBJECT-TYPE    
  DateTime  

sessionLogDisconnectTime 1.3.6.1.4.1.33.13.6.2.1.9
The date and time that session disconnection occurred. Corresponds directly to the value labeled 'Disconnect Time' in the SERVER ACCOUNTING display.
OBJECT-TYPE    
  DateTime  

sessionLogInCharacters 1.3.6.1.4.1.33.13.6.2.1.10
The number of characters that came into the port for the session. Corresponds directly to the value labeled 'Bytes In' in the SERVER ACCOUNTING display.
OBJECT-TYPE    
  Counter  

sessionLogOutCharacters 1.3.6.1.4.1.33.13.6.2.1.11
The number of characters that went out of the port for the session. Corresponds directly to the value labeled 'Bytes Out' in the SERVER ACCOUNTING display.
OBJECT-TYPE    
  Counter  

sessionLogVerboseEvent 1.3.6.1.4.1.33.13.6.2.1.12
When logging in 'verbose' mode, the event that occured.
OBJECT-TYPE    
  INTEGER login(1), connectLocal(2), connectRemote(3), disconnect(4), connectRcp(5), disconnectRcp(6), telnetMaint(7), xremote(8), xprinter(9), lpd(12), connectX25(13), disconnectX25(14), userDefined(15)  

sessionLogX25Direction 1.3.6.1.4.1.33.13.6.2.1.13
The initial direction for an X.25 connection. A value of 0 is returned if the session is not X25
OBJECT-TYPE    
  INTEGER inbound(1), outbound(2)  

sessionLogVerboseMessage 1.3.6.1.4.1.33.13.6.2.1.14
Text describing the event that was logged.
OBJECT-TYPE    
  DisplayString  

sessionLogX25CallerAddress 1.3.6.1.4.1.33.13.6.2.1.15
For an X.25 connection, the X.121 source address.
OBJECT-TYPE    
  OCTET STRING SIZE(0..20)  

sessionLogX25CalledAddress 1.3.6.1.4.1.33.13.6.2.1.16
For an X.25 connection, the X.121 destination address.
OBJECT-TYPE    
  OCTET STRING SIZE(0..20)  

sessionLogX25DisconnectCause 1.3.6.1.4.1.33.13.6.2.1.17
For a terminated X.25 connection, the standard, X.25 cause code.
OBJECT-TYPE    
  INTEGER  

sessionLogX25DisconnectDiagnostic 1.3.6.1.4.1.33.13.6.2.1.18
For a terminated X.25 connection, the standard, X.25 diagnostic code.
OBJECT-TYPE    
  INTEGER  

sessionLogHostType 1.3.6.1.4.1.33.13.6.3
The type of host to which session log events are to be sent.
OBJECT-TYPE    
  INTEGER none(1), unix(2)  

sessionLogHostAddress 1.3.6.1.4.1.33.13.6.4
The address of the host to receive events.
OBJECT-TYPE    
  OCTET STRING SIZE(0..4)  

sessionLogVerbose 1.3.6.1.4.1.33.13.6.5
Control for verbose logging.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

sessionLogPriority 1.3.6.1.4.1.33.13.6.6
The largest priority number for the system to log. Higher numbered (lower priority) events will not be logged.
OBJECT-TYPE    
  INTEGER 0..7  

sessionLogEmpty 1.3.6.1.4.1.33.13.6.7
Control to empty the log. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' causes the log to be emptied.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

sessionLogFacility 1.3.6.1.4.1.33.13.6.8
The UNIX facility level that server originated accounting messages are logged to.
OBJECT-TYPE    
  INTEGER local0(1), local1(2), local2(3), local3(4), local4(5), local5(6), local6(7), local7(8), user(9)  

sessionLogReliable 1.3.6.1.4.1.33.13.6.9
Control for reliable logging. Corresponds directly to the presence of the label 'Reliable Accounting' following the label 'Enabled Characteristics:' in the SERVER CHARACTERISTICS display.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

sessionLogHostSecondaryType 1.3.6.1.4.1.33.13.6.10
The type of secondary host to which session log events are to be sent. This value should be set to unix when configuring a non-zero sessionLogHostSecondaryAddress. Corresponds to the presence of the label 'SYSLOGD Host2' following the label 'Daemon(s)' in the SERVER UNIT display.
OBJECT-TYPE    
  INTEGER none(1), unix(2)  

sessionLogHostSecondaryAddress 1.3.6.1.4.1.33.13.6.11
The address of a secondary host to receive events. Corresponds directly to the value labeled 'SYSLOGD Host2' in the SERVER UNIT display.
OBJECT-TYPE    
  OCTET STRING SIZE(0..4)  

sessionLogZeroAccountingAll 1.3.6.1.4.1.33.13.6.12
A control to clear all entries in the accounting log including command log entries. Corresponds directly to the command CLEAR SERVER ACCOUNTING ALL. In response to a get-request or get-next-request the agent always returns ready for this value.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

sessionLogZeroCommandLogging 1.3.6.1.4.1.33.13.6.13
A control to clear all command log entries. Corresponds directly to the command CLEAR SERVER COMMAND LOGGING. In response to a get-request or get-next-request the agent always returns ready for this value.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

sessionLogTl1AutonomousLogSize 1.3.6.1.4.1.33.13.6.14
The size in bytes of the TL1 autonomous log, which records alarms. A change in log size will not take effect until rebooting the unit.
OBJECT-TYPE    
  INTEGER 0..1000  

sessionLogTl1CommandLogSize 1.3.6.1.4.1.33.13.6.15
The size in bytes of the TL1 command log, which records all TL1 commands entered on this server. A change in log size will not take effect until rebooting the unit.
OBJECT-TYPE    
  INTEGER 0..1000  

sessionLogZeroDataLogging 1.3.6.1.4.1.33.13.6.16
A control to clear all data log entries. Corresponds directly to the command CLEAR SERVER DATA LOGGING. In response to a get-request or get-next-request the agent always returns ready for this value.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

sessionLogZeroAlarmLogging 1.3.6.1.4.1.33.13.6.17
Control to clear all alarm log entries. In response to a get-request or a get-next-request the agent always returns ready for this value.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

xCcl 1.3.6.1.4.1.33.13.7
OBJECT IDENTIFIER    

cclParsedScriptTable 1.3.6.1.4.1.33.13.7.1
A list of parsed CCL scripts.
OBJECT-TYPE    
  SEQUENCE OF  
    CclParsedScriptEntry

cclParsedScriptEntry 1.3.6.1.4.1.33.13.7.1.1
Parsed CCL script information.
OBJECT-TYPE    
  CclParsedScriptEntry  

cclScriptName 1.3.6.1.4.1.33.13.7.1.1.1
The name of a CCL script file that has been loaded from a script server. Corresponds directly to the name in a SERVER CCL command and the value labeled 'CCL name:' in the PORT CHARACTERISTICS display.
OBJECT-TYPE    
  DisplayString SIZE(1..32)  

cclScriptControl 1.3.6.1.4.1.33.13.7.1.1.2
Control for maintaining the CCL script. The refresh action consists of retrieving the script by name from a script server and parsing it into an executable format. This may be used to add an entry to the table or refresh an existing entry with a new version of the CCL script from the server. This command may take ten seconds or more to complete and may fail if the script file cannot be retrieved or an error is encountered in parsing the CCL script. An error value of genErr is returned upon refresh failure. The refresh action corresponds directly to the commnd: REFRESH SERVER CCL. Setting this field to delete causes a script that is NOT being referenced by any ports to be removed from the list and its memory freed. This action corresponds directly to the command: DELETE SERVER CCL. An error value of badValue is returned upon delete failure.
OBJECT-TYPE    
  INTEGER refresh(1), delete(2)  

cclPortTable 1.3.6.1.4.1.33.13.7.2
A list of ccl character port entries.
OBJECT-TYPE    
  SEQUENCE OF  
    CclPortEntry

cclPortEntry 1.3.6.1.4.1.33.13.7.2.1
CCL parameter values for a port.
OBJECT-TYPE    
  CclPortEntry  

cclPortCclName 1.3.6.1.4.1.33.13.7.2.1.1
The name of the ARAP modem CCL script file.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

cclPortModemAudible 1.3.6.1.4.1.33.13.7.2.1.2
This boolean indicates if the CCL script should put the modem into audible mode.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

xBroadcastGroup 1.3.6.1.4.1.33.13.8
OBJECT IDENTIFIER    

broadcastGroupTable 1.3.6.1.4.1.33.13.8.1
A list of broadcast groups.
OBJECT-TYPE    
  SEQUENCE OF  
    BroadcastGroupEntry

broadcastGroupEntry 1.3.6.1.4.1.33.13.8.1.1
Broadcast group information.
OBJECT-TYPE    
  BroadcastGroupEntry  

broadcastGroupIndex 1.3.6.1.4.1.33.13.8.1.1.1
An index value that uniquely identifies a broadcast group.
OBJECT-TYPE    
  INTEGER 1..10  

broadcastGroupStatus 1.3.6.1.4.1.33.13.8.1.1.2
A status value for the broadcast group. The value 'enabled' means that the group is active and broadcasting data whereas 'disabled' means that the group is not active.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

broadcastGroupMaster 1.3.6.1.4.1.33.13.8.1.1.3
An index value that uniquely identifies the Master Broadcast Port for this group. The port provided in this object is the same port as identified by charPortIndex in the standard Character MIB.
OBJECT-TYPE    
  INTEGER  

broadcastGroupSlaves 1.3.6.1.4.1.33.13.8.1.1.4
A bitmap representing the ports included in this broadcast group. A bit with a value of '1' means the corresponding port is included in the broadcast group whereas a value of '0' indicates that the port is not part of the broadcast group.
OBJECT-TYPE    
  OCTET STRING  

broadcastGroupSlavesBroadcastOnly 1.3.6.1.4.1.33.13.8.1.1.5
A bitmap representing the ports set up to discard input data and transmit only the broadcast data on the line. A bit set to '1' means that the corresponding port will only broadcast the data and discard any input.
OBJECT-TYPE    
  OCTET STRING  

broadcastGroupSlaveTcpPort 1.3.6.1.4.1.33.13.8.1.1.6
A TCP port number on which the broadcast group process will listen for incoming TCP connections. A client connected to this particular port will receive the data broadcast by the Master Port. A value of '0' indicates that no TCP port is defined.
OBJECT-TYPE    
  INTEGER 0..65554  

broadcastGroupSlaveTcpBroadcastOnly 1.3.6.1.4.1.33.13.8.1.1.7
Specifies whether the TCP port will discard input characters for the Master port so that the Master port operates in broadcast only mode.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

xPingHosts 1.3.6.1.4.1.33.13.9
OBJECT IDENTIFIER    

pingHostsTable 1.3.6.1.4.1.33.13.9.1
A list of ICMP ping hosts.
OBJECT-TYPE    
  SEQUENCE OF  
    PingHostsEntry

pingHostsEntry 1.3.6.1.4.1.33.13.9.1.1
Ping Hosts information.
OBJECT-TYPE    
  PingHostsEntry  

icmpPingHostIndex 1.3.6.1.4.1.33.13.9.1.1.1
An index value that uniquely identifies a ping host.
OBJECT-TYPE    
  INTEGER 1..24  

icmpPingHostAddress 1.3.6.1.4.1.33.13.9.1.1.2
The host address to be monitored to make sure it is reachable using ICMP pings. This address must be unique within the table, and must be Set to a non-zero value prior to configuring the other attributes of the ping host. A set-request with an IpAddress of zero will make this entry inactive.
OBJECT-TYPE    
  IpAddress  

icmpPingHostDescription 1.3.6.1.4.1.33.13.9.1.1.3
This is an optional description of the ping host.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

icmpPingHostNotificationType 1.3.6.1.4.1.33.13.9.1.1.4
Indicates the type of notification used, if any, when the ping host is determined to be unreachable. If the type is snmp, a trap is sent to configured trap clients.
OBJECT-TYPE    
  INTEGER none(1), snmp(2)  

icmpPingHostPollingInterval 1.3.6.1.4.1.33.13.9.1.1.5
The time in seconds between sending an ICMP ping to a ping host in order to check for reachability.
OBJECT-TYPE    
  INTEGER 5..65535  

icmpPingHostMaximumRetries 1.3.6.1.4.1.33.13.9.1.1.6
The maximum consecutive failed attempts to reach the host via ICMP ping before sending notification as specified by icmpPingHostNotificationType.
OBJECT-TYPE    
  INTEGER 1..255  

icmpPingHostTrapSeverityLevel 1.3.6.1.4.1.33.13.9.1.1.7
Indicates the severity level of a trap to be sent out when the host is unreachable.
OBJECT-TYPE    
  INTEGER indeterminate(2), warning(3), minor(4), major(5), critical(6)  

icmpPingHostStatus 1.3.6.1.4.1.33.13.9.1.1.8
Indicates the current status of the ping host. If the host is reachable, the status is cleared. Otherwise, it is the same as the icmpPingHostTrapSeverityLevel.
OBJECT-TYPE    
  INTEGER cleared(1), indeterminate(2), warning(3), minor(4), major(5), critical(6)  

xDecnet 1.3.6.1.4.1.33.14
OBJECT IDENTIFIER    

xRcp 1.3.6.1.4.1.33.14.1
OBJECT IDENTIFIER    

rcpRemoteAddress 1.3.6.1.4.1.33.14.1.1
If a remote console session exists, the Ethernet address of the remote partner, otherwise zero length.
OBJECT-TYPE    
  OCTET STRING SIZE(0..6)  

xPhiv 1.3.6.1.4.1.33.14.2
OBJECT IDENTIFIER    

xPhivRoute 1.3.6.1.4.1.33.14.2.1
OBJECT IDENTIFIER    

phivPathSelection 1.3.6.1.4.1.33.14.2.1.1
The algorithm used to balance traffic between equal next hop paths. 'roundRobin' selects the next hop using a round robin algorithm for each hop. 'samePath' selects the next hop guaranteeing that all packets with the same source/destination pair will always use the same next hop.
OBJECT-TYPE    
  INTEGER roundRobin(1), samePath(2)  

phivMaxPaths 1.3.6.1.4.1.33.14.2.1.2
The maximum number of equal cost next hops that the router can remember and successfully load balance between.
OBJECT-TYPE    
  INTEGER 1..255  

phivStatus 1.3.6.1.4.1.33.14.2.1.3
The status of the DECnet routing software.
OBJECT-TYPE    
  INTEGER active(1), disabled(2), noAddressSpecified(3), noInterfacesEnabled(4), badCost(5)  

xPhivCircuit 1.3.6.1.4.1.33.14.2.2
OBJECT IDENTIFIER    

phivCircuitTable 1.3.6.1.4.1.33.14.2.2.1
A list of DECnet circuit entries.
OBJECT-TYPE    
  SEQUENCE OF  
    PhivCircuitEntry

phivCircuitEntry 1.3.6.1.4.1.33.14.2.2.1.1
Parameter values for a DECnet circuit.
OBJECT-TYPE    
  PhivCircuitEntry  

xPhivCircuitIndex 1.3.6.1.4.1.33.14.2.2.1.1.1
Identification of a circuit entry. Same as an interface index (ifIndex).
OBJECT-TYPE    
  INTEGER  

phivCircuitRoutingTimer 1.3.6.1.4.1.33.14.2.2.1.1.2
The maximum time in seconds allowed between Routing updates on the circuit. Different values for LANs vs. WANs.
OBJECT-TYPE    
  INTEGER 1..65535  

phivCircuitOperCost 1.3.6.1.4.1.33.14.2.2.1.1.3
The actual cost associated with the circuit.
OBJECT-TYPE    
  INTEGER  

phivCircuitErrors 1.3.6.1.4.1.33.14.2.2.1.1.4
The number of routed DECnet packets received in error on this circuit.
OBJECT-TYPE    
  Counter  

phivCircuitLastError 1.3.6.1.4.1.33.14.2.2.1.1.5
The error of the last routed DECnet packet received in error on this circuit.
OBJECT-TYPE    
  INTEGER noError(1), addressOutOfRange(2), ageExceeded(3), destinationUnreachable(4), packetFormatError(5), packetOversized(6), partialRoutingUpdate(7), verificationReject(8)  

phivCircuitLastErrorTime 1.3.6.1.4.1.33.14.2.2.1.1.6
The date and time that the last routed DECnet packet was received in error on this circuit.
OBJECT-TYPE    
  DateTime  

phivCircuitLastErrorData 1.3.6.1.4.1.33.14.2.2.1.1.7
The first 22 bytes of the last routed DECnet packet received in error on this circuit.
OBJECT-TYPE    
  OCTET STRING SIZE(22)  

phivCircuitProtocolPriority 1.3.6.1.4.1.33.14.2.2.1.1.8
The priority at which all DECnet routed packets will be placed on the WAN output queue.
OBJECT-TYPE    
  INTEGER low(1), medium(3), high(5)  

phivCircuitRoutingPriority 1.3.6.1.4.1.33.14.2.2.1.1.9
Router's priority to be designated router on this circuit.
OBJECT-TYPE    
  INTEGER 0..127  

xPhivImport 1.3.6.1.4.1.33.14.2.3
OBJECT IDENTIFIER    

phivCircuitImportTable 1.3.6.1.4.1.33.14.2.3.1
A list of circuit import filter entries.
OBJECT-TYPE    
  SEQUENCE OF  
    PhivCircuitImportEntry

phivCircuitImportEntry 1.3.6.1.4.1.33.14.2.3.1.1
Parameter values for an import filter.
OBJECT-TYPE    
  PhivCircuitImportEntry  

phivCircuitImportIf 1.3.6.1.4.1.33.14.2.3.1.1.1
The interface associated with the import routing filter.
OBJECT-TYPE    
  INTEGER  

phivCircuitImportAddr 1.3.6.1.4.1.33.14.2.3.1.1.2
The address (node or area) to match against learned route entries to decide whether to import the entry to the routing database.
OBJECT-TYPE    
  PhivAddr  

phivCircuitImportMask 1.3.6.1.4.1.33.14.2.3.1.1.3
The mask which is ANDed with the address field as well as the route entries address to determine whether the address matches the route entry.
OBJECT-TYPE    
  PhivAddr  

phivCircuitImportAction 1.3.6.1.4.1.33.14.2.3.1.1.4
The action to take if the address field along with the mask field matches the route entry.
OBJECT-TYPE    
  INTEGER discard(1), accept(2)  

phivCircuitImportStatus 1.3.6.1.4.1.33.14.2.3.1.1.5
Setting to 'invalid' removes this import filter from the table. Setting to 'valid' has no effect.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

xPhivImportArea 1.3.6.1.4.1.33.14.2.4
OBJECT IDENTIFIER    

phivCircuitImportAreaTable 1.3.6.1.4.1.33.14.2.4.1
A list of circuit import area filter entries.
OBJECT-TYPE    
  SEQUENCE OF  
    PhivCircuitImportAreaEntry

phivCircuitImportAreaEntry 1.3.6.1.4.1.33.14.2.4.1.1
Parameter values for an import area filter.
OBJECT-TYPE    
  PhivCircuitImportAreaEntry  

phivCircuitImportAreaIf 1.3.6.1.4.1.33.14.2.4.1.1.1
The interface associated with the import area routing filter.
OBJECT-TYPE    
  INTEGER  

phivCircuitImportAreaAddr 1.3.6.1.4.1.33.14.2.4.1.1.2
The address (node or area) to match against learned route entries to decide whether to import the entry to the routing database.
OBJECT-TYPE    
  PhivAddr  

phivCircuitImportAreaMask 1.3.6.1.4.1.33.14.2.4.1.1.3
The mask which is ANDed with the address field as well as the route entries address to determine whether the address matches the route entry.
OBJECT-TYPE    
  PhivAddr  

phivCircuitImportAreaAction 1.3.6.1.4.1.33.14.2.4.1.1.4
The action to take if the address field along with the mask field matches the route entry.
OBJECT-TYPE    
  INTEGER discard(1), accept(2)  

phivCircuitImportAreaStatus 1.3.6.1.4.1.33.14.2.4.1.1.5
Setting to 'invalid' removes this import area filter from the table. Setting to 'valid' has no effect.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

xPhivExport 1.3.6.1.4.1.33.14.2.5
OBJECT IDENTIFIER    

phivCircuitExportTable 1.3.6.1.4.1.33.14.2.5.1
A list of circuit export filter entries.
OBJECT-TYPE    
  SEQUENCE OF  
    PhivCircuitExportEntry

phivCircuitExportEntry 1.3.6.1.4.1.33.14.2.5.1.1
Parameter values for an export filter.
OBJECT-TYPE    
  PhivCircuitExportEntry  

phivCircuitExportIf 1.3.6.1.4.1.33.14.2.5.1.1.1
The interface associated with the export routing filter.
OBJECT-TYPE    
  INTEGER  

phivCircuitExportAddr 1.3.6.1.4.1.33.14.2.5.1.1.2
The address (node or area) to match against learned route entries to decide whether to export the entry to the routing database.
OBJECT-TYPE    
  PhivAddr  

phivCircuitExportMask 1.3.6.1.4.1.33.14.2.5.1.1.3
The mask which is ANDed with the address field as well as the route entries address to determine whether the address matches the route entry.
OBJECT-TYPE    
  PhivAddr  

phivCircuitExportAction 1.3.6.1.4.1.33.14.2.5.1.1.4
The action to take if the address field along with the mask field matches the route entry.
OBJECT-TYPE    
  INTEGER hide(1), advertise(2)  

phivCircuitExportStatus 1.3.6.1.4.1.33.14.2.5.1.1.5
Setting to 'invalid' removes this export filter from the table. Setting to 'valid' has no effect.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

xPhivExportArea 1.3.6.1.4.1.33.14.2.6
OBJECT IDENTIFIER    

phivCircuitExportAreaTable 1.3.6.1.4.1.33.14.2.6.1
A list of circuit export area filter entries.
OBJECT-TYPE    
  SEQUENCE OF  
    PhivCircuitExportAreaEntry

phivCircuitExportAreaEntry 1.3.6.1.4.1.33.14.2.6.1.1
Parameter values for an export area filter.
OBJECT-TYPE    
  PhivCircuitExportAreaEntry  

phivCircuitExportAreaIf 1.3.6.1.4.1.33.14.2.6.1.1.1
The interface associated with the export area routing filter.
OBJECT-TYPE    
  INTEGER  

phivCircuitExportAreaAddr 1.3.6.1.4.1.33.14.2.6.1.1.2
The address (node or area) to match against learned route entries to decide whether to export the entry to the routing database.
OBJECT-TYPE    
  PhivAddr  

phivCircuitExportAreaMask 1.3.6.1.4.1.33.14.2.6.1.1.3
The mask which is ANDed with the address field as well as the route entries address to determine whether the address matches the route entry.
OBJECT-TYPE    
  PhivAddr  

phivCircuitExportAreaAction 1.3.6.1.4.1.33.14.2.6.1.1.4
The action to take if the address field along with the mask field matches the route entry.
OBJECT-TYPE    
  INTEGER hide(1), advertise(2)  

phivCircuitExportAreaStatus 1.3.6.1.4.1.33.14.2.6.1.1.5
Setting to 'invalid' removes this export area filter from the table. Setting to 'valid' has no effect.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

xPhivFilter 1.3.6.1.4.1.33.14.2.7
OBJECT IDENTIFIER    

phivCircuitFilterTable 1.3.6.1.4.1.33.14.2.7.1
A list of circuit filter entries.
OBJECT-TYPE    
  SEQUENCE OF  
    PhivCircuitFilterEntry

phivCircuitFilterEntry 1.3.6.1.4.1.33.14.2.7.1.1
Parameter values for a filter.
OBJECT-TYPE    
  PhivCircuitFilterEntry  

phivCircuitFilterIf 1.3.6.1.4.1.33.14.2.7.1.1.1
The interface associated with the filter entry.
OBJECT-TYPE    
  INTEGER  

phivCircuitFilterDstAddr 1.3.6.1.4.1.33.14.2.7.1.1.2
The address (node or area) to match against the destination address of the packet to decide whether to forward the packet.
OBJECT-TYPE    
  PhivAddr  

phivCircuitFilterDstMask 1.3.6.1.4.1.33.14.2.7.1.1.3
The mask which is ANDed with the destination address field and the packet's destination address to determine whether the address matches the packet's address.
OBJECT-TYPE    
  PhivAddr  

phivCircuitFilterSrcAddr 1.3.6.1.4.1.33.14.2.7.1.1.4
The address (node or area) to match against the source address of the packet to decide whether to forward the packet.
OBJECT-TYPE    
  PhivAddr  

phivCircuitFilterSrcMask 1.3.6.1.4.1.33.14.2.7.1.1.5
The mask which is ANDed with the source address field and the packet's source address to determine whether the address matches the packet's address.
OBJECT-TYPE    
  PhivAddr  

phivCircuitFilterAction 1.3.6.1.4.1.33.14.2.7.1.1.6
The action to take if the address fields along with the mask fields match the packet.
OBJECT-TYPE    
  INTEGER discard(1), forward(2)  

phivCircuitFilterStatus 1.3.6.1.4.1.33.14.2.7.1.1.7
Setting to 'invalid' removes this Filter filter from the table. Setting to 'valid' has no effect.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

xPhivTraffic 1.3.6.1.4.1.33.14.2.8
OBJECT IDENTIFIER    

phivTrafficSort 1.3.6.1.4.1.33.14.2.8.1
Setting to 'execute' causes the most recent traffic information to be sorted into the phivTrafficTable. The sorting precedence is: decreasing percentage, increasing destination address, increasing source address, and increasing interface number. Setting to 'ready' has no effect.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

phivTrafficTable 1.3.6.1.4.1.33.14.2.8.2
A list of traffic entries, sorted in the order specified by phivTrafficSort.
OBJECT-TYPE    
  SEQUENCE OF  
    PhivTrafficEntry

phivTrafficEntry 1.3.6.1.4.1.33.14.2.8.2.1
A traffic entry.
OBJECT-TYPE    
  PhivTrafficEntry  

phivTrafficIndex 1.3.6.1.4.1.33.14.2.8.2.1.1
Identification of this traffic entry.
OBJECT-TYPE    
  INTEGER  

phivTrafficPercent 1.3.6.1.4.1.33.14.2.8.2.1.2
The percentage of total traffic that this traffic entry represents, in tenths of a percent.
OBJECT-TYPE    
  INTEGER 0..1000  

phivTrafficDst 1.3.6.1.4.1.33.14.2.8.2.1.3
The destination to which the traffic entry applies.
OBJECT-TYPE    
  PhivAddr  

phivTrafficSrc 1.3.6.1.4.1.33.14.2.8.2.1.4
The source to which the traffic entry applies.
OBJECT-TYPE    
  PhivAddr  

phivTrafficIf 1.3.6.1.4.1.33.14.2.8.2.1.5
The inbound interface to which the traffic entry applies. This value is the same as IfIndex.
OBJECT-TYPE    
  INTEGER  

xIpx 1.3.6.1.4.1.33.15
OBJECT IDENTIFIER    

xIpxSystem 1.3.6.1.4.1.33.15.1
OBJECT IDENTIFIER    

ipxRouting 1.3.6.1.4.1.33.15.1.1
Control for IPX routing services.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

ipxInternalNetwork 1.3.6.1.4.1.33.15.1.2
The IPX Internal Network to use on the the IPX Router.
OBJECT-TYPE    
  INTEGER 1..4294967294  

xIpxIf 1.3.6.1.4.1.33.15.2
OBJECT IDENTIFIER    

ipxIfTable 1.3.6.1.4.1.33.15.2.1
A list of IPX interface entries.
OBJECT-TYPE    
  SEQUENCE OF  
    IpxIfEntry

ipxIfEntry 1.3.6.1.4.1.33.15.2.1.1
IPX interface parameters and counters.
OBJECT-TYPE    
  IpxIfEntry  

ipxIfIndex 1.3.6.1.4.1.33.15.2.1.1.1
An index value that uniquely identifies an IPX interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  INTEGER  

ipxIfState 1.3.6.1.4.1.33.15.2.1.1.2
Control for IPX routing services for this interface.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

ipxIfNetwork 1.3.6.1.4.1.33.15.2.1.1.3
The IPX network number of the network to which this interface is attached.
OBJECT-TYPE    
  INTEGER  

ipxIfFrameStyle 1.3.6.1.4.1.33.15.2.1.1.4
Control for the CSMA/CD frame style to use on this interface.
OBJECT-TYPE    
  INTEGER ethernet(1), ieee8023(2), ieee8022(3), ieee802Snap(4)  

ipxIfFramesIn 1.3.6.1.4.1.33.15.2.1.1.5
The number of IPX frames received on this interface.
OBJECT-TYPE    
  Counter  

ipxIfFramesOut 1.3.6.1.4.1.33.15.2.1.1.6
The number of IPX frames sent on this interface.
OBJECT-TYPE    
  Counter  

ipxIfErrors 1.3.6.1.4.1.33.15.2.1.1.7
The number of IPX errors seen on this interface.
OBJECT-TYPE    
  Counter  

ipxIfTransitDelay 1.3.6.1.4.1.33.15.2.1.1.8
The number of 55 millisecond ticks it takes for a packet to travel from one destination to another on the interface. A value of 0 means that the system will calculate this value based on the measured speed of the interface.
OBJECT-TYPE    
  INTEGER  

ipxIfTransitDelayActual 1.3.6.1.4.1.33.15.2.1.1.9
The number of 55 millisecond ticks it takes for a packet to travel from one destination to another on the interface.
OBJECT-TYPE    
  INTEGER  

ipxIfProtocolPriority 1.3.6.1.4.1.33.15.2.1.1.10
This value defines the priority at which all Internet Routed packets will be placed on the WAN output queue.
OBJECT-TYPE    
  INTEGER low(1), medium(3), high(5)  

ipxIfWatchdogSpoof 1.3.6.1.4.1.33.15.2.1.1.11
Control for whether or not this router responds to IPX watchog requests on this interface.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

ipxIfStatusNetwork 1.3.6.1.4.1.33.15.2.1.1.12
The IPX network number that is actually in use on the attached interface. This value may have been learned via listening to the attached network.
OBJECT-TYPE    
  INTEGER  

xIpxNetbios 1.3.6.1.4.1.33.15.3
OBJECT IDENTIFIER    

ipxNetbiosHopLimit 1.3.6.1.4.1.33.15.3.1
Maximum number of hops that an IPX Netbios packet may make.
OBJECT-TYPE    
  INTEGER 0..255  

ipxNetbiosIfTable 1.3.6.1.4.1.33.15.3.2
A list of IPX interface entries.
OBJECT-TYPE    
  SEQUENCE OF  
    IpxNetbiosIfEntry

ipxNetbiosIfEntry 1.3.6.1.4.1.33.15.3.2.1
IPX interface parameters and counters.
OBJECT-TYPE    
  IpxNetbiosIfEntry  

ipxNetbiosIfIndex 1.3.6.1.4.1.33.15.3.2.1.1
An index value that uniquely identifies an IPX interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  INTEGER  

ipxIfNetbiosForwarding 1.3.6.1.4.1.33.15.3.2.1.2
Control whether Netbios packet will be forwarded in or out on this interface.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

ipxIfNetbiosIn 1.3.6.1.4.1.33.15.3.2.1.3
The number of IPX Netbios frames received on this interface.
OBJECT-TYPE    
  Counter  

ipxIfNetbiosOut 1.3.6.1.4.1.33.15.3.2.1.4
The number of IPX Netbios frames sent on this interface.
OBJECT-TYPE    
  Counter  

xIpxRip 1.3.6.1.4.1.33.15.4
OBJECT IDENTIFIER    

ipxRipIfTable 1.3.6.1.4.1.33.15.4.1
A list of IPX interface entries.
OBJECT-TYPE    
  SEQUENCE OF  
    IpxRipIfEntry

ipxRipIfEntry 1.3.6.1.4.1.33.15.4.1.1
IPX interface parameters and counters.
OBJECT-TYPE    
  IpxRipIfEntry  

ipxRipIfIndex 1.3.6.1.4.1.33.15.4.1.1.1
An index value that uniquely identifies an IPX interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  INTEGER  

ipxIfRipBcst 1.3.6.1.4.1.33.15.4.1.1.2
Control whether RIP packets will be broadcasted out this interface.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2), propUpdateOnly(3), demandCircuit(4)  

ipxIfRipBcstDiscardTimeout 1.3.6.1.4.1.33.15.4.1.1.3
The number of seconds to wait before discarding information learned from a RIP broadcast.
OBJECT-TYPE    
  INTEGER  

ipxIfRipBcstTimer 1.3.6.1.4.1.33.15.4.1.1.4
The number of seconds to wait between sending out RIP broadcasts.
OBJECT-TYPE    
  INTEGER  

ipxIfRipIn 1.3.6.1.4.1.33.15.4.1.1.5
The number of RIP broadcasts received on this interface.
OBJECT-TYPE    
  Counter  

ipxIfRipOut 1.3.6.1.4.1.33.15.4.1.1.6
The number of RIP broadcasts sent on this interface.
OBJECT-TYPE    
  Counter  

ipxIfRipAgedOut 1.3.6.1.4.1.33.15.4.1.1.7
The number of entries timed out and discarded on this interface.
OBJECT-TYPE    
  Counter  

ipxRipTable 1.3.6.1.4.1.33.15.4.2
A list of RIP entries.
OBJECT-TYPE    
  SEQUENCE OF  
    IpxRipEntry

ipxRipEntry 1.3.6.1.4.1.33.15.4.2.1
IPX interface parameters and counters.
OBJECT-TYPE    
  IpxRipEntry  

ipxRipNetwork 1.3.6.1.4.1.33.15.4.2.1.1
An IPX network number to which this router knows a path.
OBJECT-TYPE    
  INTEGER  

ipxRipRouter 1.3.6.1.4.1.33.15.4.2.1.2
The Ethernet address of an IPX router on this network.
OBJECT-TYPE    
  OCTET STRING SIZE(6)  

ipxRipInterface 1.3.6.1.4.1.33.15.4.2.1.3
The interface to reach the router. A value of ifIndex.
OBJECT-TYPE    
  INTEGER  

ipxRipHops 1.3.6.1.4.1.33.15.4.2.1.4
The number of hops to reach the router.
OBJECT-TYPE    
  INTEGER  

ipxRipTransTime 1.3.6.1.4.1.33.15.4.2.1.5
The number of 55 millisecond ticks it takes for a packet to travel to the router.
OBJECT-TYPE    
  INTEGER  

ipxRipAge 1.3.6.1.4.1.33.15.4.2.1.6
The age of the RIP entry in seconds.
OBJECT-TYPE    
  INTEGER  

ipxRipRtTable 1.3.6.1.4.1.33.15.4.3
A list of RIP Routing entries.
OBJECT-TYPE    
  SEQUENCE OF  
    IpxRipRtEntry

ipxRipRtEntry 1.3.6.1.4.1.33.15.4.3.1
IPX Routing Entry information
OBJECT-TYPE    
  IpxRipRtEntry  

ipxRipRtNetwork 1.3.6.1.4.1.33.15.4.3.1.1
An IPX network number to which this router knows a path.
OBJECT-TYPE    
  INTEGER  

ipxRipRtRouter 1.3.6.1.4.1.33.15.4.3.1.2
The Ethernet address of an IPX router on this network.
OBJECT-TYPE    
  OCTET STRING SIZE(6)  

ipxRipRtInterface 1.3.6.1.4.1.33.15.4.3.1.3
The interface to reach the router. A value of ifIndex.
OBJECT-TYPE    
  INTEGER  

ipxRipRtHops 1.3.6.1.4.1.33.15.4.3.1.4
The number of hops to reach the router.
OBJECT-TYPE    
  INTEGER 0..16  

ipxRipRtTransTime 1.3.6.1.4.1.33.15.4.3.1.5
The number of 55 millisecond ticks it takes for a packet to travel to the router.
OBJECT-TYPE    
  INTEGER 0..65535  

ipxRipRtOrigin 1.3.6.1.4.1.33.15.4.3.1.6
The source of the RIP entry, either Learned via RIP or Static.
OBJECT-TYPE    
  INTEGER ripLearned(1), static(2), nlspLearned(3)  

ipxRipRtRowStatus 1.3.6.1.4.1.33.15.4.3.1.7
Create or Delete RIP routing table entries.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

xIpxSap 1.3.6.1.4.1.33.15.5
OBJECT IDENTIFIER    

ipxSapIfTable 1.3.6.1.4.1.33.15.5.1
A list of IPX interface entries.
OBJECT-TYPE    
  SEQUENCE OF  
    IpxSapIfEntry

ipxSapIfEntry 1.3.6.1.4.1.33.15.5.1.1
IPX interface parameters and counters.
OBJECT-TYPE    
  IpxSapIfEntry  

ipxSapIfIndex 1.3.6.1.4.1.33.15.5.1.1.1
An index value that uniquely identifies an IPX interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  INTEGER  

ipxIfSapBcst 1.3.6.1.4.1.33.15.5.1.1.2
Control whether SAP packets will be broadcasted out this interface.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2), propUpdateOnly(3), demandCircuit(4)  

ipxIfSapBcstDiscardTimeout 1.3.6.1.4.1.33.15.5.1.1.3
The number of seconds to wait before discarding information learned from a SAP broadcast.
OBJECT-TYPE    
  INTEGER  

ipxIfSapBcstTimer 1.3.6.1.4.1.33.15.5.1.1.4
The number of seconds to wait between sending out SAP broadcasts.
OBJECT-TYPE    
  INTEGER  

ipxIfSapIn 1.3.6.1.4.1.33.15.5.1.1.5
The number SAP broadcasts received on this interface.
OBJECT-TYPE    
  Counter  

ipxIfSapOut 1.3.6.1.4.1.33.15.5.1.1.6
The number SAP broadcasts sent on this interface.
OBJECT-TYPE    
  Counter  

ipxIfSapAgedOut 1.3.6.1.4.1.33.15.5.1.1.7
The number entries for this interface discarded due to aging timeout.
OBJECT-TYPE    
  Counter  

ipxSapTable 1.3.6.1.4.1.33.15.5.2
A list of SAP entries.
OBJECT-TYPE    
  SEQUENCE OF  
    IpxSapEntry

ipxSapEntry 1.3.6.1.4.1.33.15.5.2.1
IPX interface parameters and counters.
OBJECT-TYPE    
  IpxSapEntry  

ipxSapName 1.3.6.1.4.1.33.15.5.2.1.1
The name of the service, null filled.
OBJECT-TYPE    
  DisplayString SIZE(48)  

ipxSapNetwork 1.3.6.1.4.1.33.15.5.2.1.2
The IPX network number on which the service's host resides.
OBJECT-TYPE    
  INTEGER  

ipxSapHost 1.3.6.1.4.1.33.15.5.2.1.3
The Ethernet address of the IPX host of the service.
OBJECT-TYPE    
  OCTET STRING SIZE(6)  

ipxSapSocket 1.3.6.1.4.1.33.15.5.2.1.4
The socket number of the service on the host.
OBJECT-TYPE    
  INTEGER  

ipxSapInterface 1.3.6.1.4.1.33.15.5.2.1.5
The interface of the router in the direction of the service. A value of ifIndex.
OBJECT-TYPE    
  INTEGER  

ipxSapType 1.3.6.1.4.1.33.15.5.2.1.6
The type of the service. The enumeration is an incomplete set of all possible values.
OBJECT-TYPE    
  INTEGER user(1), userGroup(2), printQueue(3), novellFileServer(4), jobServer(5), gateway1(6), printServer(7), archiveQueue(8), archiveServer(9), jobQueue(10), administration(11)  

ipxSapAge 1.3.6.1.4.1.33.15.5.2.1.7
The age of the Sap entry in seconds.
OBJECT-TYPE    
  INTEGER  

ipxSapSvTable 1.3.6.1.4.1.33.15.5.3
A list of SAP entries.
OBJECT-TYPE    
  SEQUENCE OF  
    IpxSapSvEntry

ipxSapSvEntry 1.3.6.1.4.1.33.15.5.3.1
IPX interface parameters and counters.
OBJECT-TYPE    
  IpxSapSvEntry  

ipxSapSvName 1.3.6.1.4.1.33.15.5.3.1.1
The name of the service.
OBJECT-TYPE    
  DisplayString SIZE(0..48)  

ipxSapSvNetwork 1.3.6.1.4.1.33.15.5.3.1.2
The IPX network number on which the service's host resides.
OBJECT-TYPE    
  INTEGER  

ipxSapSvHost 1.3.6.1.4.1.33.15.5.3.1.3
The Ethernet address of the IPX host of the service.
OBJECT-TYPE    
  OCTET STRING SIZE(6)  

ipxSapSvSocket 1.3.6.1.4.1.33.15.5.3.1.4
The socket number of the service on the host.
OBJECT-TYPE    
  INTEGER 0..65535  

ipxSapSvInterface 1.3.6.1.4.1.33.15.5.3.1.5
The interface of the router in the direction of the service. A value of ifIndex.
OBJECT-TYPE    
  INTEGER  

ipxSapSvOrigin 1.3.6.1.4.1.33.15.5.3.1.6
The source of the RIP entry, either Learned via RIP or Static.
OBJECT-TYPE    
  INTEGER ipxSapLearned(1), ipxStatic(2)  

ipxSapSvType 1.3.6.1.4.1.33.15.5.3.1.7
The type of the service. The enumeration is an incomplete set of all possible values.
OBJECT-TYPE    
  INTEGER user(1), userGroup(2), printQueue(3), novellFileServer(4), jobServer(5), gateway1(6), printServer(7), archiveQueue(8), archiveServer(9), jobQueue(10), administration(11)  

ipxSapSvHops 1.3.6.1.4.1.33.15.5.3.1.8
The number of hops to the Service.
OBJECT-TYPE    
  INTEGER 0..16  

ipxSapSvRowStatus 1.3.6.1.4.1.33.15.5.3.1.9
Create or Delete SAP Service table entries.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

ipxSapSvAge 1.3.6.1.4.1.33.15.5.3.1.10
The age of the Sap entry in seconds.
OBJECT-TYPE    
  INTEGER  

xIpxFilter 1.3.6.1.4.1.33.15.6
OBJECT IDENTIFIER    

ipxIfFilterTable 1.3.6.1.4.1.33.15.6.1
A list of IPX interface Source and Destination address Filter entries.
OBJECT-TYPE    
  SEQUENCE OF  
    IpxIfFilterEntry

ipxIfFilterEntry 1.3.6.1.4.1.33.15.6.1.1
IPX Source and Destination interface Filters.
OBJECT-TYPE    
  IpxIfFilterEntry  

ipxIfFilterIndex 1.3.6.1.4.1.33.15.6.1.1.1
The interface to which this IPX Address filter applies. A value of ifIndex.
OBJECT-TYPE    
  INTEGER  

ipxIfFilterDestNetwork 1.3.6.1.4.1.33.15.6.1.1.2
The destination IPX network to be filtered.
OBJECT-TYPE    
  INTEGER  

ipxIfFilterDestNode 1.3.6.1.4.1.33.15.6.1.1.3
The destination IPX node to be filtered.
OBJECT-TYPE    
  OCTET STRING SIZE(6)  

ipxIfFilterSourceNetwork 1.3.6.1.4.1.33.15.6.1.1.4
The destination IPX network to be filtered.
OBJECT-TYPE    
  INTEGER  

ipxIfFilterSourceNode 1.3.6.1.4.1.33.15.6.1.1.5
The destination IPX node to be filtered.
OBJECT-TYPE    
  OCTET STRING SIZE(6)  

ipxIfFilterPacketType 1.3.6.1.4.1.33.15.6.1.1.6
The IPX packet type to be filtered.
OBJECT-TYPE    
  INTEGER 0..255  

ipxIfFilterAction 1.3.6.1.4.1.33.15.6.1.1.7
The IPX filter action to be taken, either Forward or Discard.
OBJECT-TYPE    
  INTEGER forward(1), discard(2)  

ipxIfFilterRowStatus 1.3.6.1.4.1.33.15.6.1.1.8
The IPX Filter create or delete function.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

ipxIfFilterStatusDestNetworkAll 1.3.6.1.4.1.33.15.6.1.1.9
The IPX Filter flag meaning ALL destination networks.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

ipxIfFilterStatusDestNodeAll 1.3.6.1.4.1.33.15.6.1.1.10
The IPX Filter flag meaning ALL destination nodes.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

ipxIfFilterStatusSourceNetworkAll 1.3.6.1.4.1.33.15.6.1.1.11
The IPX Filter flag meaning ALL source networks.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

ipxIfFilterStatusSourceNodeAll 1.3.6.1.4.1.33.15.6.1.1.12
The IPX Filter flag meaning ALL source nodes.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

ipxIfFilterStatusPacketTypeAll 1.3.6.1.4.1.33.15.6.1.1.13
The IPX Filter flag meaning ALL packet types.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

ipxIfRipFilterTable 1.3.6.1.4.1.33.15.6.2
A list of IPX interface RIP Filter entries.
OBJECT-TYPE    
  SEQUENCE OF  
    IpxIfRipFilterEntry

ipxIfRipFilterEntry 1.3.6.1.4.1.33.15.6.2.1
IPX RIP interface Filters.
OBJECT-TYPE    
  IpxIfRipFilterEntry  

ipxIfRipFilterNetwork 1.3.6.1.4.1.33.15.6.2.1.1
The IPX RIP network to be filtered.
OBJECT-TYPE    
  INTEGER  

ipxIfRipFilterType 1.3.6.1.4.1.33.15.6.2.1.2
The IPX RIP filter type, either IMPORT or EXPORT.
OBJECT-TYPE    
  INTEGER import(1), export(2)  

ipxIfRipFilterAction 1.3.6.1.4.1.33.15.6.2.1.3
The IPX RIP filter action to be taken, either ALLOW or DENY.
OBJECT-TYPE    
  INTEGER allow(1), deny(2)  

ipxIfRipFilterRowStatus 1.3.6.1.4.1.33.15.6.2.1.4
The IPX RIP Filter create or delete function.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

ipxIfRipFilterNetworkAll 1.3.6.1.4.1.33.15.6.2.1.5
The IPX RIP Filter flag meaning filter ALL networks.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

ipxIfRipFilterHost 1.3.6.1.4.1.33.15.6.2.1.6
The RIP Filter IPX Host Address from which RIP will ALLOW/DENY IMPORT of routes.
OBJECT-TYPE    
  OCTET STRING SIZE(6)  

ipxIfSapFilterTable 1.3.6.1.4.1.33.15.6.3
A list of IPX interface SAP Filter entries.
OBJECT-TYPE    
  SEQUENCE OF  
    IpxIfSapFilterEntry

ipxIfSapFilterEntry 1.3.6.1.4.1.33.15.6.3.1
IPX SAP interface Filters.
OBJECT-TYPE    
  IpxIfSapFilterEntry  

ipxIfSapFilterNetwork 1.3.6.1.4.1.33.15.6.3.1.1
The IPX SAP network to be filtered.
OBJECT-TYPE    
  INTEGER  

ipxIfSapFilterType 1.3.6.1.4.1.33.15.6.3.1.2
The IPX SAP filter type, either IMPORT or EXPORT.
OBJECT-TYPE    
  INTEGER import(1), export(2)  

ipxIfSapFilterServiceType 1.3.6.1.4.1.33.15.6.3.1.3
The IPX SAP service type to which this filter applies.
OBJECT-TYPE    
  INTEGER 0..65535  

ipxIfSapFilterAction 1.3.6.1.4.1.33.15.6.3.1.4
The IPX SAP filter action to be taken, either ALLOW or DENY.
OBJECT-TYPE    
  INTEGER allow(1), deny(2)  

ipxIfSapFilterRowStatus 1.3.6.1.4.1.33.15.6.3.1.5
The IPX SAP Filter create or delete function.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

ipxIfSapFilterNetworkAll 1.3.6.1.4.1.33.15.6.3.1.6
The IPX SAP Filter flag meaning filter ALL networks.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

ipxIfSapFilterServiceTypeAll 1.3.6.1.4.1.33.15.6.3.1.7
The IPX SAP Filter flag meaning filter ALL service types.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

ipxIfSapFilterName 1.3.6.1.4.1.33.15.6.3.1.8
The name of the service to be filtered.
OBJECT-TYPE    
  DisplayString SIZE(0..48)  

ipxIfSapFilterHost 1.3.6.1.4.1.33.15.6.3.1.9
The IPX Host address from which SAP will ALLOW/DENY IMPORT of services .
OBJECT-TYPE    
  OCTET STRING SIZE(6)  

xIpxPrinter 1.3.6.1.4.1.33.15.8
OBJECT IDENTIFIER    

ipxPrinterPortTable 1.3.6.1.4.1.33.15.8.1
A list of IPX printer character port entries.
OBJECT-TYPE    
  SEQUENCE OF  
    IpxPrinterPortEntry

ipxPrinterPortEntry 1.3.6.1.4.1.33.15.8.1.1
IPX printer parameter values for a character port.
OBJECT-TYPE    
  IpxPrinterPortEntry  

ipxPrinterPortIndex 1.3.6.1.4.1.33.15.8.1.1.1
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.
OBJECT-TYPE    
  INTEGER  

ipxPrinterPortStatus 1.3.6.1.4.1.33.15.8.1.1.2
Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

ipxPrinterPortServer 1.3.6.1.4.1.33.15.8.1.1.3
The name of an active print server on the network.
OBJECT-TYPE    
  DisplayString SIZE(0..48)  

ipxPrinterPortPrinter 1.3.6.1.4.1.33.15.8.1.1.4
An available remote printer on ixpPrinterPortServer.
OBJECT-TYPE    
  INTEGER 0..255  

ipxTimeout 1.3.6.1.4.1.33.15.8.1.1.5
A control to set the the time at which a print job from a print server will be timed out and the port freed.
OBJECT-TYPE    
  INTEGER 15..300  

ipxPrinterEthernet 1.3.6.1.4.1.33.15.8.2
Control for use of Ethernet-style message framing, with the IPX protocol type. Mutually exclusive with ipxPrinterMac, ipxPrinterMac802_2_Snap, and ipxPrinterMac802_2.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

ipxPrinterMac 1.3.6.1.4.1.33.15.8.3
Control for use of MAC-only message framing, with no protocol type. Mutually exclusive with ipxPrinterEthernet, ipxPrinterMac802_2_Snap, and ipxPrinterMac802_2.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

ipxPrinterMac802-2 1.3.6.1.4.1.33.15.8.4
Control for use of MAC message framing with 802.2 framing. Mutually exclusive with ipxPrinterEthernet, ipxPrinterMac, and ipxPrinterMac802_2_Snap.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

ipxPrinterMac802-2-Snap 1.3.6.1.4.1.33.15.8.5
Control for use of MAC-only message framing with 802 Snap framing. Mutually exclusive with ipxPrinterEthernet, ipxPrinterMac, and ipxPrinterMac802_2.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

xChassis 1.3.6.1.4.1.33.16
OBJECT IDENTIFIER    

xChassisBasic 1.3.6.1.4.1.33.16.1
OBJECT IDENTIFIER    

basicBase802Address 1.3.6.1.4.1.33.16.1.1
Base IEEE 802 global address for the chassis.
OBJECT-TYPE    
  MacAddress  

basicSlot 1.3.6.1.4.1.33.16.1.2
Chassis slot number (slotIndex) of the system whose agent is supplying this MIB.
OBJECT-TYPE    
  INTEGER  

basicSlotNumber 1.3.6.1.4.1.33.16.1.3
Number of slots in the chassis.
OBJECT-TYPE    
  INTEGER  

basicNewBase802Address 1.3.6.1.4.1.33.16.1.4
New base IEEE 802 global address for the chassis. Must be set in conjunction with featType 'changeEthernetAddress' and featKey from the MRV In-Reach System MIB.
OBJECT-TYPE    
  MacAddress  

xSegment 1.3.6.1.4.1.33.16.2
OBJECT IDENTIFIER    

segmentTable 1.3.6.1.4.1.33.16.2.1
A list of segment entries, one for each segment of each type on the chassis.
OBJECT-TYPE    
  SEQUENCE OF  
    SegmentEntry

segmentEntry 1.3.6.1.4.1.33.16.2.1.1
Values for a chassis segment.
OBJECT-TYPE    
  SegmentEntry  

segmentType 1.3.6.1.4.1.33.16.2.1.1.1
The segment type.
OBJECT-TYPE    
  NetworkType  

segmentIndex 1.3.6.1.4.1.33.16.2.1.1.2
An index value that uniquely identifies a segment.
OBJECT-TYPE    
  Letter  

xPort 1.3.6.1.4.1.33.16.3
OBJECT IDENTIFIER    

portIOCardType 1.3.6.1.4.1.33.16.3.1
The hardware type of the I/O card in this slot.
OBJECT-TYPE    
  IOType  

portIOCardSerialNumber 1.3.6.1.4.1.33.16.3.2
The MRV In-Reach serial number of the I/O card in this slot.
OBJECT-TYPE    
  SerialNumber  

portIOCardOperStatus 1.3.6.1.4.1.33.16.3.3
Status of the I/O card relative to the function card in this slot.
OBJECT-TYPE    
  INTEGER unknown(1), mismatch(2), good(3)  

portTable 1.3.6.1.4.1.33.16.3.4
A list of port entries, one for each port of each type on the slots I/O card.
OBJECT-TYPE    
  SEQUENCE OF  
    PortEntry

portEntry 1.3.6.1.4.1.33.16.3.4.1
Values for an I/O card port.
OBJECT-TYPE    
  PortEntry  

portType 1.3.6.1.4.1.33.16.3.4.1.1
The port type.
OBJECT-TYPE    
  NetworkType  

portIndex 1.3.6.1.4.1.33.16.3.4.1.2
An index value that uniquely identifies a port.
OBJECT-TYPE    
  INTEGER  

xController 1.3.6.1.4.1.33.16.4
OBJECT IDENTIFIER    

controllerTable 1.3.6.1.4.1.33.16.4.1
A list of controller entries, one for each controller of each type on the local system.
OBJECT-TYPE    
  SEQUENCE OF  
    ControllerEntry

controllerEntry 1.3.6.1.4.1.33.16.4.1.1
Values for a controller.
OBJECT-TYPE    
  ControllerEntry  

controllerType 1.3.6.1.4.1.33.16.4.1.1.1
The controller type.
OBJECT-TYPE    
  NetworkType  

controllerIndex 1.3.6.1.4.1.33.16.4.1.1.2
An index value that uniquely identifies a controller.
OBJECT-TYPE    
  INTEGER  

controllerNetwork 1.3.6.1.4.1.33.16.4.1.1.3
The instance identifier of the first object in the conceptual row entry for the segment, port, or controller this controller is to use, that is, segmentType, portType or controllerType.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

xInterface 1.3.6.1.4.1.33.16.5
OBJECT IDENTIFIER    

interfaceTable 1.3.6.1.4.1.33.16.5.1
A list of interface entries, corresponding to the MIB II Interface group. These are directly equivalent to hardware network controllers, and must be the lowest numbered interfaces on the system.
OBJECT-TYPE    
  SEQUENCE OF  
    InterfaceEntry

interfaceEntry 1.3.6.1.4.1.33.16.5.1.1
Values for an interface.
OBJECT-TYPE    
  InterfaceEntry  

interfaceIndex 1.3.6.1.4.1.33.16.5.1.1.1
An index value that uniquely identifies an interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  INTEGER  

interfaceNetwork 1.3.6.1.4.1.33.16.5.1.1.2
The instance identifier of the first object in the conceptual row entry for the segment, port, or controller this interface is to use, that is, segmentType, portType, or controllerType.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

xSlotBootControl 1.3.6.1.4.1.33.16.6
OBJECT IDENTIFIER    

slotBootControlTable 1.3.6.1.4.1.33.16.6.1
A list of slot boot control entries.
OBJECT-TYPE    
  SEQUENCE OF  
    SlotBootControlEntry

slotBootControlEntry 1.3.6.1.4.1.33.16.6.1.1
Values for a chassis slot.
OBJECT-TYPE    
  SlotBootControlEntry  

slotBootControlSlot 1.3.6.1.4.1.33.16.6.1.1.1
An index value that uniquely identifies a slot, defined the same as slotIndex.
OBJECT-TYPE    
  INTEGER  

slotBootControlIndex 1.3.6.1.4.1.33.16.6.1.1.2
An index value that uniquely identifies a boot control entry, from 1 to the number of entries for the slot.
OBJECT-TYPE    
  INTEGER  

slotBootControlStatus 1.3.6.1.4.1.33.16.6.1.1.3
The status of the entry. Set to 'disabled' to disable the entry.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlController 1.3.6.1.4.1.33.16.6.1.1.4
The instance identifier of the first object in the conceptual row entry for the controller this entry selects for bootstrap operation, that is, controllerType. This entry must be compatible with slotBootControlNetwork, including being of the same network type. The value 0.0 indicates default action.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

slotBootControlNetwork 1.3.6.1.4.1.33.16.6.1.1.5
The instance identifier of the first object in the conceptual row entry for the segment or port this entry selects for bootstrap operation, that is, segmentType or portType. This entry must be compatible with slotBootControlController, including being of the same network type. The value 0.0 indicates default action.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

slotBootControlMopFile 1.3.6.1.4.1.33.16.6.1.1.6
The software file name to request for down-line load of the server via MOP or XMOP.
OBJECT-TYPE    
  DisplayString SIZE(0..15)  

slotBootControlInternetFile 1.3.6.1.4.1.33.16.6.1.1.7
The filename to request when loading an image via TFTP.
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

slotBootControlInternetAddress 1.3.6.1.4.1.33.16.6.1.1.8
The internet address of the system is to use for itself when loading via TFTP. The value 0.0.0.0 indicates default action.
OBJECT-TYPE    
  IpAddress  

slotBootControlInternetServer 1.3.6.1.4.1.33.16.6.1.1.9
The internet address of the server to use when loading an image via TFTP. The value 0.0.0.0 indicates default action.
OBJECT-TYPE    
  IpAddress  

slotBootControlInternetGateway 1.3.6.1.4.1.33.16.6.1.1.10
The internet address of the gateway to use when loading an image via TFTP. The value 0.0.0.0 indicates default action.
OBJECT-TYPE    
  IpAddress  

slotBootControlInternetDelimiter 1.3.6.1.4.1.33.16.6.1.1.11
The character separating the load file directory name from the file name.
OBJECT-TYPE    
  DisplayString SIZE(0..1)  

slotBootControlFlagTable 1.3.6.1.4.1.33.16.6.2
A list of slot boot control source flag entries.
OBJECT-TYPE    
  SEQUENCE OF  
    SlotBootControlFlagEntry

slotBootControlFlagEntry 1.3.6.1.4.1.33.16.6.2.1
Values for a boot control flag.
OBJECT-TYPE    
  SlotBootControlFlagEntry  

slotBootControlFlagLoadBootpTftp 1.3.6.1.4.1.33.16.6.2.1.1
Control for performing load over BOOTP/TFTP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagParamBootpTftp 1.3.6.1.4.1.33.16.6.2.1.2
Control for performing parameter load over BOOTP/TFTP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagDumpBootpTftp 1.3.6.1.4.1.33.16.6.2.1.3
Control for performing dump over BOOTP/TFTP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagLoadTftpDirect 1.3.6.1.4.1.33.16.6.2.1.4
Control for performing load over direct TFTP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagParamTftpDirect 1.3.6.1.4.1.33.16.6.2.1.5
Control for performing parameter load over direct TFTP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagDumpTftpDirect 1.3.6.1.4.1.33.16.6.2.1.6
Control for performing dump over direct TFTP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagLoadLocal 1.3.6.1.4.1.33.16.6.2.1.7
Control for performing load from a local device.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagParamLocal 1.3.6.1.4.1.33.16.6.2.1.8
Control for performing parameter load from a local device.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagDumpLocal 1.3.6.1.4.1.33.16.6.2.1.9
Control for performing dump from a local device.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagLoadMop 1.3.6.1.4.1.33.16.6.2.1.10
Control for performing load over Digital's MOP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagParamMop 1.3.6.1.4.1.33.16.6.2.1.11
Control for performing parameter load over Digital's MOP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagDumpMop 1.3.6.1.4.1.33.16.6.2.1.12
Control for performing dump over Digital's MOP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagLoadXmop 1.3.6.1.4.1.33.16.6.2.1.13
Control for performing load over MRV In-Reach extended MOP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagParamXmop 1.3.6.1.4.1.33.16.6.2.1.14
Control for performing parameter load over MRV In-Reach extended MOP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagDumpXmop 1.3.6.1.4.1.33.16.6.2.1.15
Control for performing dump over MRV In-Reach extended MOP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagLoadRarpTftp 1.3.6.1.4.1.33.16.6.2.1.16
Control for performing load over RARP/TFTP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagParamRarpTftp 1.3.6.1.4.1.33.16.6.2.1.17
Control for performing parameter load over RARP/TFTP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagDumpRarpTftp 1.3.6.1.4.1.33.16.6.2.1.18
Control for performing dump over RARP/TFTP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlStorageTable 1.3.6.1.4.1.33.16.6.3
A list of slot boot control Storage entries.
OBJECT-TYPE    
  SEQUENCE OF  
    SlotBootControlStorageEntry

slotBootControlStorageEntry 1.3.6.1.4.1.33.16.6.3.1
Values for a chassis slot.
OBJECT-TYPE    
  SlotBootControlStorageEntry  

slotBootControlStorageClientSlot 1.3.6.1.4.1.33.16.6.3.1.1
An index value that uniquely identifies a slot, defined the same as slotIndex.
OBJECT-TYPE    
  INTEGER  

slotBootControlStorageServerSlot 1.3.6.1.4.1.33.16.6.3.1.2
An index value that uniquely identifies the slot in which the Storage record resides, with the same values as slotIndex.
OBJECT-TYPE    
  INTEGER  

slotBootControlStorageStatus 1.3.6.1.4.1.33.16.6.3.1.3
The status of the entry.
OBJECT-TYPE    
  INTEGER present(1), failed(2), ok(3), notpresent(4)  

slotBootControlStorageFailures 1.3.6.1.4.1.33.16.6.3.1.4
The number of times a read from or write to a given Storage location failed
OBJECT-TYPE    
  Counter  

xSlot 1.3.6.1.4.1.33.16.7
OBJECT IDENTIFIER    

slotTable 1.3.6.1.4.1.33.16.7.1
A list of slot entries.
OBJECT-TYPE    
  SEQUENCE OF  
    SlotEntry

slotEntry 1.3.6.1.4.1.33.16.7.1.1
Values for a chassis slot.
OBJECT-TYPE    
  SlotEntry  

slotIndex 1.3.6.1.4.1.33.16.7.1.1.1
An index value that uniquely identifies a slot, in the range 0 to basicSlotNumber, where the value 0 indicates the same slot as basicSlot. As the objects found at instance zero are duplicates, that instance does not appear in responses a get-next, that is, the lowest numbered slotIndex returned by get-next is 1.
OBJECT-TYPE    
  INTEGER  

slotAdminAction 1.3.6.1.4.1.33.16.7.1.1.2
Control to cause reset of the system in a slot. When read, the value is always 'ready'. Setting to 'reset' or 'resetHold' causes a single attempt to take that action, but does not ensure transition to any particular value of slotOperStatus.
OBJECT-TYPE    
  INTEGER ready(1), reset(2), resetHold(3)  

slotOperStatus 1.3.6.1.4.1.33.16.7.1.1.3
Relative to the chassis, the current operating status of the system in the slot.
OBJECT-TYPE    
  INTEGER loadRequested(1), loading(2), dumpRequested(3), dumping(4), paramRequested(5), paramLoading(6), running(7), initializing(8), attended(9), internal10(10), internal11(11), inhibited(12), maxserverCard(13), invalidConfigStorage(14), securityLockdown(15), resetHold(64), selfTest(65), notResponding(66), broken(67), unknown(68), notApplicable(69)  

slotSecondsSinceReset 1.3.6.1.4.1.33.16.7.1.1.4
The number of seconds since the system in the slot was last reset by hardware or software.
OBJECT-TYPE    
  Gauge  

slotHardwareType 1.3.6.1.4.1.33.16.7.1.1.5
The type of hardware in the slot.
OBJECT-TYPE    
  HardwareType  

slotHardwareSerialNumber 1.3.6.1.4.1.33.16.7.1.1.6
The MRV In-Reach serial number of the function card hardware in this slot.
OBJECT-TYPE    
  SerialNumber  

slotHardwareRevision 1.3.6.1.4.1.33.16.7.1.1.7
This revision level of the function card hardware in the slot.
OBJECT-TYPE    
  INTEGER  

slotIOCardType 1.3.6.1.4.1.33.16.7.1.1.8
The hardware type of the I/O card in this slot.
OBJECT-TYPE    
  IOType  

slotIOCardSerialNumber 1.3.6.1.4.1.33.16.7.1.1.9
The MRV In-Reach serial number of the I/O card in this slot.
OBJECT-TYPE    
  SerialNumber  

slotIOCardOperStatus 1.3.6.1.4.1.33.16.7.1.1.10
Status of the I/O card relative to the function card in this slot.
OBJECT-TYPE    
  INTEGER unknown(1), mismatch(2), good(3), notApplicable(4)  

slotBootstrapFirmwareRevision 1.3.6.1.4.1.33.16.7.1.1.11
The firmware revision level of the bootstrap ROM installed in the system in the slot.
OBJECT-TYPE    
  INTEGER  

slotElementalFirmwareRevision 1.3.6.1.4.1.33.16.7.1.1.12
The firmware revision level of the minimal function ROM (management bus microprocessor) installed in the system in the slot.
OBJECT-TYPE    
  INTEGER  

slotMemorySize 1.3.6.1.4.1.33.16.7.1.1.13
The number of bytes of memory installed in the system in the slot.
OBJECT-TYPE    
  INTEGER  

slotLedNumber 1.3.6.1.4.1.33.16.7.1.1.14
The number of LEDs on the system in the slot. A value of 0 indicates none, unknown, or status not readable.
OBJECT-TYPE    
  Gauge  

slotLedStatus 1.3.6.1.4.1.33.16.7.1.1.15
The status of the LEDs displayed on the front and back of the system in the slot. The first bit is the high-order bit of the first byte of the value, proceeding to the low-order bit, then to then next byte. On the system hardware, the first LED is at the top, left, front, proceeding left to right, top to bottom, and front to back.
OBJECT-TYPE    
  OCTET STRING SIZE(0..9)  

slotBase802Address 1.3.6.1.4.1.33.16.7.1.1.16
Base IEEE 802 global address for the slot.
OBJECT-TYPE    
  MacAddress  

slotIpAddress 1.3.6.1.4.1.33.16.7.1.1.17
An internet address to which the system in this slot might respond. May be one of many.
OBJECT-TYPE    
  IpAddress  

slotPlus5Status 1.3.6.1.4.1.33.16.7.1.1.18
Status of the +5 volt power to the slot.
OBJECT-TYPE    
  INTEGER unknown(1), broken(2), good(3)  

slotPlus12Status 1.3.6.1.4.1.33.16.7.1.1.19
Status of the +12 volt power to the slot.
OBJECT-TYPE    
  INTEGER unknown(1), broken(2), good(3)  

slotMinus12Status 1.3.6.1.4.1.33.16.7.1.1.20
Status of the -12 volt power to the slot.
OBJECT-TYPE    
  INTEGER unknown(1), broken(2), good(3)  

slotPlus5Watts 1.3.6.1.4.1.33.16.7.1.1.21
Tenths of watts of +5 volt power currently drawn by the slot.
OBJECT-TYPE    
  Gauge  

slotPlus12Watts 1.3.6.1.4.1.33.16.7.1.1.22
Tenths of watts of +12 volt power currently drawn by the slot.
OBJECT-TYPE    
  Gauge  

slotMinus12Watts 1.3.6.1.4.1.33.16.7.1.1.23
Tenths of watts of -12 volt power currently drawn by the slot.
OBJECT-TYPE    
  Gauge  

slotIOCardHardwareVersion 1.3.6.1.4.1.33.16.7.1.1.24
Version number of I/O card in the slot.
OBJECT-TYPE    
  INTEGER  

slotRestoreNVS 1.3.6.1.4.1.33.16.7.1.1.25
Setting to 'execute' causes the non-volatile parameter storage to be restored from an installed memory card. Setting to 'ready' has no effect.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

slotDefaultNVS 1.3.6.1.4.1.33.16.7.1.1.26
Setting to 'execute' causes non-volatile stored parameters to be reset to factory defaults. Setting to 'ready' has no effect.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

slotBootTable 1.3.6.1.4.1.33.16.7.2
A list of slot bootstrap status entries. A given slot has an entry in this table only when slotOperStatus is one of: loadRequested, loading, dumpRequested, dumping, paramRequested, paramLoading
OBJECT-TYPE    
  SEQUENCE OF  
    SlotBootEntry

slotBootEntry 1.3.6.1.4.1.33.16.7.2.1
Bootstrap status values for a chassis slot.
OBJECT-TYPE    
  SlotBootEntry  

slotBootIndex 1.3.6.1.4.1.33.16.7.2.1.1
An index value that uniquely identifies a slot, defined the same as slotIndex.
OBJECT-TYPE    
  INTEGER  

slotBootIfIndex 1.3.6.1.4.1.33.16.7.2.1.2
An index value that uniquely identifies the interface in use for bootstrap functions. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  INTEGER  

slotBootNetwork 1.3.6.1.4.1.33.16.7.2.1.3
The instance identifier of the first object in the conceptual row entry for the segment or port this interface is using, that is, segmentType or portType.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

slotBootProtocol 1.3.6.1.4.1.33.16.7.2.1.4
The protocol in use for bootstrap operation.
OBJECT-TYPE    
  INTEGER other(1), unknown(2), mop(3), xmop(4), rarpTftp(5), bootpTftp(6), tftp(7), local(8), managementBus(9)  

slotBoot802Address 1.3.6.1.4.1.33.16.7.2.1.5
IEEE 802 global address in use for bootstrap operation.
OBJECT-TYPE    
  MacAddress  

slotBootAddressType 1.3.6.1.4.1.33.16.7.2.1.6
The type of network address contained in slotBootAddress.
OBJECT-TYPE    
  AddressType  

slotBootAddress 1.3.6.1.4.1.33.16.7.2.1.7
The network address the system in the slot is using to identify itself for bootstrap operation.
OBJECT-TYPE    
  OCTET STRING SIZE(0..6)  

slotBootServerAddressType 1.3.6.1.4.1.33.16.7.2.1.8
The type of network address contained in slotBootServerAddress.
OBJECT-TYPE    
  AddressType  

slotBootServerAddress 1.3.6.1.4.1.33.16.7.2.1.9
The network address of the system supplying bootstrap services to the system in the slot.
OBJECT-TYPE    
  OCTET STRING SIZE(0..6)  

slotBootGatewayAddress 1.3.6.1.4.1.33.16.7.2.1.10
The internet address of the router in use for bootstrap operation.
OBJECT-TYPE    
  IpAddress  

slotBootFileName 1.3.6.1.4.1.33.16.7.2.1.11
The full name of the file in use for bootstrap operation.
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

slotBootBlockNumber 1.3.6.1.4.1.33.16.7.2.1.12
The current block number being transferred for bootstrap operation, zero if unknown or not applicable.
OBJECT-TYPE    
  Gauge  

slotBootCrashCode 1.3.6.1.4.1.33.16.7.2.1.13
If slotOperStatus is dumpRequested or dumping, a code number to identify the crash reason; otherwise zero length.
OBJECT-TYPE    
  OCTET STRING SIZE(0..4)  

slotControllerTable 1.3.6.1.4.1.33.16.7.3
A list of controller entries, one for each controller of each type in each slot.
OBJECT-TYPE    
  SEQUENCE OF  
    SlotControllerEntry

slotControllerEntry 1.3.6.1.4.1.33.16.7.3.1
Values for a controller.
OBJECT-TYPE    
  SlotControllerEntry  

slotControllerType 1.3.6.1.4.1.33.16.7.3.1.1
The controller type.
OBJECT-TYPE    
  NetworkType  

slotControllerIndex 1.3.6.1.4.1.33.16.7.3.1.2
An index value that uniquely identifies a controller.
OBJECT-TYPE    
  INTEGER  

slotControllerNetwork 1.3.6.1.4.1.33.16.7.3.1.3
The instance identifier of the first object in the conceptual row entry for the segment or port this controller is to use, that is, segmentType or portType.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

xPowerSupply 1.3.6.1.4.1.33.16.8
OBJECT IDENTIFIER    

powerSupplyTable 1.3.6.1.4.1.33.16.8.1
A list of power supply entries.
OBJECT-TYPE    
  SEQUENCE OF  
    PowerSupplyEntry

powerSupplyEntry 1.3.6.1.4.1.33.16.8.1.1
Values for a chassis power supply.
OBJECT-TYPE    
  PowerSupplyEntry  

powerSupplyIndex 1.3.6.1.4.1.33.16.8.1.1.1
An index value that uniquely identifies a power supply, in the range 1 to the number of power supply slots in the chassis.
OBJECT-TYPE    
  INTEGER  

powerSupplyAdminAction 1.3.6.1.4.1.33.16.8.1.1.2
Control to cause reset of the power supply. When read, the value is always 'ready'. Setting to 'reset' or 'resetHold' causes a single attempt to take that action, but does not ensure transition to any particular value of powerSupplyRedundancyStatus.
OBJECT-TYPE    
  INTEGER ready(1), reset(2), resetHold(3)  

powerSupplyFirmwareVersion 1.3.6.1.4.1.33.16.8.1.1.3
Version number of power supply firmware.
OBJECT-TYPE    
  INTEGER  

powerSupplyRedundancyStatus 1.3.6.1.4.1.33.16.8.1.1.4
The current redundancy status of the power supply.
OBJECT-TYPE    
  INTEGER unknown(1), disabled(2), redundant(3), engaged(4)  

powerSupplyPlus5Status 1.3.6.1.4.1.33.16.8.1.1.5
Status of the +5 volt power from the power supply.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyPlus12Status 1.3.6.1.4.1.33.16.8.1.1.6
Status of the +12 volt power from the power supply.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyMinus12Status 1.3.6.1.4.1.33.16.8.1.1.7
Status of the -12 volt power from the power supply.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyThermalWarningStatus 1.3.6.1.4.1.33.16.8.1.1.8
The current thermal warning status of the power supply.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyThermalShutdownStatus 1.3.6.1.4.1.33.16.8.1.1.9
The current thermal shutdown status of the power supply.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyFanStatus 1.3.6.1.4.1.33.16.8.1.1.10
The current status of the power supply's fan.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyHardwareInhibitStatus 1.3.6.1.4.1.33.16.8.1.1.11
The current status of the power supply's hardware inhibit.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyPlus5History 1.3.6.1.4.1.33.16.8.1.1.12
History of the +5 volt power from the power supply.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyPlus12History 1.3.6.1.4.1.33.16.8.1.1.13
History of the +12 volt power from the power supply.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyMinus12History 1.3.6.1.4.1.33.16.8.1.1.14
History of the -12 volt power from the power supply.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyThermalWarningHistory 1.3.6.1.4.1.33.16.8.1.1.15
The thermal warning history of the power supply.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyThermalShutdownHistory 1.3.6.1.4.1.33.16.8.1.1.16
The thermal shutdown history of the power supply.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyFanHistory 1.3.6.1.4.1.33.16.8.1.1.17
The status history of the power supply's fan.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyHardwareInhibitHistory 1.3.6.1.4.1.33.16.8.1.1.18
The status history of the power supply's hardware inhibit.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyPlus5Volts 1.3.6.1.4.1.33.16.8.1.1.19
In hundredths, volts of +5 volt power currently provided by the power supply. A value of 0 indicates unknown.
OBJECT-TYPE    
  Gauge  

powerSupplyPlus12Volts 1.3.6.1.4.1.33.16.8.1.1.20
In hundredths, volts of +12 volt power currently provided by the power supply. A value of 0 indicates unknown.
OBJECT-TYPE    
  Gauge  

powerSupplyMinus12Volts 1.3.6.1.4.1.33.16.8.1.1.21
In hundredths, volts of -12 volt power currently provided by the power supply. A value of 0 indicates unknown.
OBJECT-TYPE    
  Gauge  

powerSupplyWatts 1.3.6.1.4.1.33.16.8.1.1.22
Watts of power currently drawn from this power supply. A value of 0 indicates unknown.
OBJECT-TYPE    
  Gauge  

powerSupplyWattsMax 1.3.6.1.4.1.33.16.8.1.1.23
Maximum watts of power available from this power supply. A value of 0 indicates unknown.
OBJECT-TYPE    
  Gauge  

powerSupplyChassisWatts 1.3.6.1.4.1.33.16.8.1.1.24
Total watts of power currently drawn by the entire chassis. A value of 0 indicates unknown.
OBJECT-TYPE    
  Gauge  

powerSupplyChassisWattsMax 1.3.6.1.4.1.33.16.8.1.1.25
Total maximum watts of power available from all the power supplies in the chassis. A value of 0 indicates unknown.
OBJECT-TYPE    
  Gauge  

powerSupplyHardwareType 1.3.6.1.4.1.33.16.8.1.1.26
The type of power supply.
OBJECT-TYPE    
  INTEGER other(1), ps130(2), bb190(3)  

xFirmwareUpdate 1.3.6.1.4.1.33.16.9
OBJECT IDENTIFIER    

firmwareUpdateTable 1.3.6.1.4.1.33.16.9.1
Table of descriptive and status information concerning the writing of firmware to a target I/O card.
OBJECT-TYPE    
  SEQUENCE OF  
    FirmwareUpdateEntry

firmwareUpdateEntry 1.3.6.1.4.1.33.16.9.1.1
An entry in the table concerning the writing of firmware to a target I/O card.
OBJECT-TYPE    
  FirmwareUpdateEntry  

firmwareUpdateSlotIndex 1.3.6.1.4.1.33.16.9.1.1.1
This variable identifies the slot to which is to be the target of the firmware update.
OBJECT-TYPE    
  INTEGER  

firmwareUpdateDefaultFileName 1.3.6.1.4.1.33.16.9.1.1.2
This variable when read will obtain the default file name from the target.
OBJECT-TYPE    
  DisplayString  

firmwareUpdateFileName 1.3.6.1.4.1.33.16.9.1.1.3
This variable contains the name of the file to be read from the flash memory card and written to the target.
OBJECT-TYPE    
  DisplayString  

firmwareUpdateStatus 1.3.6.1.4.1.33.16.9.1.1.4
This variable is used to start the update process. The agent always 'ready' for this value. Setting this value to 'execute' causes the agent to write the file specified by firmwareUpdateFileName to be written to the taget. Setting this value to 'execute' when firmwareUpdateFileName has not been written or when firmwareUpdateState is 'writing' causes bad value to be returned.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

firmwareUpdateState 1.3.6.1.4.1.33.16.9.1.1.5
This variable indicates the current state of firmware update, 'idle' indicates that firmware update may be initiated, and 'writing' indicates that an update is in process.
OBJECT-TYPE    
  INTEGER idle(1), writing(2)  

firmwareUpdateCompletionStatus 1.3.6.1.4.1.33.16.9.1.1.6
This variable indicates the completion status of the the last firmware update attempt. 'none' indicates that no firmware update has yet been attempted.
OBJECT-TYPE    
  INTEGER none(1), success(2), noTarget(3), busError(4), badFileName(5), targetError(6), timeout(7)  

firmwareUpdateMethod 1.3.6.1.4.1.33.16.9.1.1.7
This variable indicates the method of update of the firmware update attempt.
OBJECT-TYPE    
  INTEGER card(1), local(2)  

xApple 1.3.6.1.4.1.33.21
OBJECT IDENTIFIER    

xAppleSystem 1.3.6.1.4.1.33.21.1
OBJECT IDENTIFIER    

appleState 1.3.6.1.4.1.33.21.1.1
Controls whether the router will perform AppleTalk routing.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

appleStatus 1.3.6.1.4.1.33.21.1.2
Indicates whether the router is performing AppleTalk routing.
OBJECT-TYPE    
  INTEGER disabled(1), active(2), noInterface(3), badConfig(4), noInterfaceActive(5)  

appleStatusIf 1.3.6.1.4.1.33.21.1.3
The ifIndex of the bad interface if appleStatus is 'badConfig'.
OBJECT-TYPE    
  INTEGER  

xApplePort 1.3.6.1.4.1.33.21.2
OBJECT IDENTIFIER    

applePortTable 1.3.6.1.4.1.33.21.2.1
Table of fields indexed by interface.
OBJECT-TYPE    
  SEQUENCE OF  
    ApplePortEntry

applePortEntry 1.3.6.1.4.1.33.21.2.1.1
A particular entry.
OBJECT-TYPE    
  ApplePortEntry  

applePortIndex 1.3.6.1.4.1.33.21.2.1.1.1
The index of the interface; same as IfIndex.
OBJECT-TYPE    
  INTEGER  

applePortProtocolPriority 1.3.6.1.4.1.33.21.2.1.1.2
This value defines the priority at which all Apple routed packets will be placed on the WAN output queue.
OBJECT-TYPE    
  INTEGER low(1), medium(3), high(5)  

applePortArpInterval 1.3.6.1.4.1.33.21.2.1.1.3
The interval at which ARP messages should be sent during the process of selecting a network address.
OBJECT-TYPE    
  INTEGER 33..65535  

applePortArpRetransmitCount 1.3.6.1.4.1.33.21.2.1.1.4
The number of ARP messages that should be sent during the process of selecting a network address.
OBJECT-TYPE    
  INTEGER 1..65535  

applePortChecksum 1.3.6.1.4.1.33.21.2.1.1.5
Controls whether checksums are generated on all DDP packets sent out the interface.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

applePortPacketsIn 1.3.6.1.4.1.33.21.2.1.1.6
The number of AppleTalk packets received on this interface.
OBJECT-TYPE    
  Counter  

applePortPacketsOut 1.3.6.1.4.1.33.21.2.1.1.7
The number of AppleTalk packets transmitted on this interface.
OBJECT-TYPE    
  Counter  

applePortForwardsIn 1.3.6.1.4.1.33.21.2.1.1.8
The number of AppleTalk packets received on this interface which were not addressed to this router.
OBJECT-TYPE    
  Counter  

applePortForwardsOut 1.3.6.1.4.1.33.21.2.1.1.9
The number of AppleTalk packets transmitted on this interface which were not originated by this router.
OBJECT-TYPE    
  Counter  

applePortNetAddress 1.3.6.1.4.1.33.21.2.1.1.10
The actual address used by this port.
OBJECT-TYPE    
  DdpAddress  

applePortNetStart 1.3.6.1.4.1.33.21.2.1.1.11
The start of the actual network range used by this port.
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

applePortNetEnd 1.3.6.1.4.1.33.21.2.1.1.12
The end of the actual network range used by this port.
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

applePortErrors 1.3.6.1.4.1.33.21.2.1.1.13
The number of AppleTalk packets received in error.
OBJECT-TYPE    
  Counter  

applePortLastError 1.3.6.1.4.1.33.21.2.1.1.14
The type of the most recent error counted in applePortErrors. A value of zero means no error.
OBJECT-TYPE    
  INTEGER broadcast(1), checksum(2), hopCount(3), noProtocol(4), noRoute(5), shortDDP(6), tooLong(7), tooShort(8)  

applePortLastErrorTime 1.3.6.1.4.1.33.21.2.1.1.15
The value of sysUptime when applePortLastError last occured.
OBJECT-TYPE    
  TimeTicks  

applePortLastErrorData 1.3.6.1.4.1.33.21.2.1.1.16
The first 22 bytes of the packet from applePortLastError.
OBJECT-TYPE    
  OCTET STRING SIZE(22)  

applePortBringBackTime 1.3.6.1.4.1.33.21.2.1.1.17
The number of seconds to shut down an interface while waiting for a manager-initiated configuration change to propagate.
OBJECT-TYPE    
  INTEGER 0..65535  

applePortUseNeighborNotify 1.3.6.1.4.1.33.21.2.1.1.18
Controls generation of neighbor notify messages when an interface is disabled or system is shut down.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

applePortRouterType 1.3.6.1.4.1.33.21.2.1.1.19
Type of router operation over this port.
OBJECT-TYPE    
  INTEGER full(1), half(2)  

applePortZoneTable 1.3.6.1.4.1.33.21.2.2
Table of fields indexed by interface and zone.
OBJECT-TYPE    
  SEQUENCE OF  
    ApplePortZoneEntry

applePortZoneEntry 1.3.6.1.4.1.33.21.2.2.1
A particular entry.
OBJECT-TYPE    
  ApplePortZoneEntry  

applePortZoneIndex 1.3.6.1.4.1.33.21.2.2.1.1
The index of the interface; same as IfIndex.
OBJECT-TYPE    
  INTEGER  

applePortZoneName 1.3.6.1.4.1.33.21.2.2.1.2
The name of the zone.
OBJECT-TYPE    
  OCTET STRING SIZE(32)  

applePortZoneStatus 1.3.6.1.4.1.33.21.2.2.1.3
The status of the entry. Set to 'invalid' to remove the entry.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

xApplePolicy 1.3.6.1.4.1.33.21.3
OBJECT IDENTIFIER    

applePortExportTable 1.3.6.1.4.1.33.21.3.1
Table of fields indexed by interface and zone.
OBJECT-TYPE    
  SEQUENCE OF  
    ApplePortExportEntry

applePortExportEntry 1.3.6.1.4.1.33.21.3.1.1
A particular entry.
OBJECT-TYPE    
  ApplePortExportEntry  

applePortExportIndex 1.3.6.1.4.1.33.21.3.1.1.1
The index of the interface; same as IfIndex.
OBJECT-TYPE    
  INTEGER  

applePortExportZone 1.3.6.1.4.1.33.21.3.1.1.2
The name of the zone.
OBJECT-TYPE    
  OCTET STRING SIZE(0..32)  

applePortExportName 1.3.6.1.4.1.33.21.3.1.1.3
The name of the name.
OBJECT-TYPE    
  OCTET STRING SIZE(0..32)  

applePortExportType 1.3.6.1.4.1.33.21.3.1.1.4
The name of the type.
OBJECT-TYPE    
  OCTET STRING SIZE(0..32)  

applePortExportAction 1.3.6.1.4.1.33.21.3.1.1.5
Control whether the data will be hidden or advertised.
OBJECT-TYPE    
  INTEGER hide(1), advertise(2)  

applePortExportStatus 1.3.6.1.4.1.33.21.3.1.1.6
The status of the entry. Set to 'invalid' to remove the entry.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

applePortImportTable 1.3.6.1.4.1.33.21.3.2
Table of fields indexed by interface and zone.
OBJECT-TYPE    
  SEQUENCE OF  
    ApplePortImportEntry

applePortImportEntry 1.3.6.1.4.1.33.21.3.2.1
A particular entry.
OBJECT-TYPE    
  ApplePortImportEntry  

applePortImportIndex 1.3.6.1.4.1.33.21.3.2.1.1
The index of the interface; same as IfIndex.
OBJECT-TYPE    
  INTEGER  

applePortImportZone 1.3.6.1.4.1.33.21.3.2.1.2
The name of the zone.
OBJECT-TYPE    
  OCTET STRING SIZE(0..32)  

applePortImportName 1.3.6.1.4.1.33.21.3.2.1.3
The name of the name.
OBJECT-TYPE    
  OCTET STRING SIZE(0..32)  

applePortImportType 1.3.6.1.4.1.33.21.3.2.1.4
The name of the type.
OBJECT-TYPE    
  OCTET STRING SIZE(0..32)  

applePortImportAction 1.3.6.1.4.1.33.21.3.2.1.5
Control whether the data will be discarded or accepted.
OBJECT-TYPE    
  INTEGER discard(1), accept(2)  

applePortImportStatus 1.3.6.1.4.1.33.21.3.2.1.6
The status of the entry. Set to 'invalid' to remove the entry.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

xAppleNbp 1.3.6.1.4.1.33.21.4
OBJECT IDENTIFIER    

appleNbpTable 1.3.6.1.4.1.33.21.4.1
Table of fields indexed by interface and zone.
OBJECT-TYPE    
  SEQUENCE OF  
    AppleNbpEntry

appleNbpEntry 1.3.6.1.4.1.33.21.4.1.1
A particular entry.
OBJECT-TYPE    
  AppleNbpEntry  

appleNbpZone 1.3.6.1.4.1.33.21.4.1.1.1
The name of the zone.
OBJECT-TYPE    
  OCTET STRING SIZE(0..32)  

appleNbpName 1.3.6.1.4.1.33.21.4.1.1.2
The name of the name.
OBJECT-TYPE    
  OCTET STRING SIZE(0..32)  

appleNbpType 1.3.6.1.4.1.33.21.4.1.1.3
The name of the type.
OBJECT-TYPE    
  OCTET STRING SIZE(0..32)  

appleNbpNode 1.3.6.1.4.1.33.21.4.1.1.4
The address of the node who offers the service associated with this entry.
OBJECT-TYPE    
  DdpAddress  

appleNbpSocket 1.3.6.1.4.1.33.21.4.1.1.5
The socket of the service associated with this entry. The value 0 means no socket.
OBJECT-TYPE    
  INTEGER  

xAppleTraffic 1.3.6.1.4.1.33.21.5
OBJECT IDENTIFIER    

appleTrafficSort 1.3.6.1.4.1.33.21.5.1
Setting to EXECUTE causes the most recent traffic information to be sorted into the appleTrafficTable. The sorting precedence is: decreasing percentage, increasing destination address, increasing source address, and increasing interface number. Setting to READY has no effect.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

appleTrafficTable 1.3.6.1.4.1.33.21.5.2
A list of traffic entries, sorted in the order specified by appleTrafficSort.
OBJECT-TYPE    
  SEQUENCE OF  
    AppleTrafficEntry

appleTrafficEntry 1.3.6.1.4.1.33.21.5.2.1
Parameter values for an Filter filter.
OBJECT-TYPE    
  AppleTrafficEntry  

appleTrafficIndex 1.3.6.1.4.1.33.21.5.2.1.1
Identification of a traffic entry.
OBJECT-TYPE    
  INTEGER  

appleTrafficPercent 1.3.6.1.4.1.33.21.5.2.1.2
The percent of total traffic that this traffic entryrepresents, in tenths of a percent.
OBJECT-TYPE    
  INTEGER 0..1000  

appleTrafficDst 1.3.6.1.4.1.33.21.5.2.1.3
The destination to which the traffic entry applies.
OBJECT-TYPE    
  DdpAddress  

appleTrafficSrc 1.3.6.1.4.1.33.21.5.2.1.4
The source to which the traffic entry applies.
OBJECT-TYPE    
  DdpAddress  

appleTrafficIntf 1.3.6.1.4.1.33.21.5.2.1.5
The inbound interface to which the traffic entry applies.
OBJECT-TYPE    
  INTEGER  

appleTrafficMonitoring 1.3.6.1.4.1.33.21.5.3
Controls whether internet traffic information will be recorded.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

xAppleRemoteAccess 1.3.6.1.4.1.33.21.6
OBJECT IDENTIFIER    

arapPassword 1.3.6.1.4.1.33.21.6.1
The server's ARAP password. To increase security, Gets of this object return the NULL string.
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

arapDefaultZoneName 1.3.6.1.4.1.33.21.6.2
The name of the AppleTalk zone that the server should try to choose at boot time.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

arapPortTable 1.3.6.1.4.1.33.21.6.3
A list of ARAP port entries.
OBJECT-TYPE    
  SEQUENCE OF  
    ArapPortEntry

arapPortEntry 1.3.6.1.4.1.33.21.6.3.1
ARAP parameter values for a port.
OBJECT-TYPE    
  ArapPortEntry  

arapPortEnabled 1.3.6.1.4.1.33.21.6.3.1.1
Indicates if ARAP connections are allowed on this port.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

arapPortZoneAccess 1.3.6.1.4.1.33.21.6.3.1.2
Indicates the AppleTalk zones that ARAP connections on this port may access: none, local, all, or named zone.
OBJECT-TYPE    
  INTEGER all(1), local(2), none(3), namedzone(4)  

arapPortZoneName 1.3.6.1.4.1.33.21.6.3.1.3
If this port's arapPortZoneAccess field indicates a named zone, this field contains the zone name.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

arapPortMaxConnectTime 1.3.6.1.4.1.33.21.6.3.1.4
Maximum number of minutes a single ARAP connection may exist on the port before a server initiated disconnect. To set no limit on the amount of time that an ARAP user may be connected, set this object to -1.
OBJECT-TYPE    
  INTEGER  

arapPortGuestLoginsOk 1.3.6.1.4.1.33.21.6.3.1.5
Indicates if 'Guest' logins (with no password) are allowed on the port.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

arapPortTimeConnected 1.3.6.1.4.1.33.21.6.3.1.6
Indicates the number of minutes the current ARAP connection has been established on the port, rounded up to the nearest minute. Gets return -1 if no ARAP user is currently connected on the port or if ARAP is not enabled on the port.
OBJECT-TYPE    
  INTEGER  

arapPortTimeRemaining 1.3.6.1.4.1.33.21.6.3.1.7
Indicates the number of minutes the current ARAP connection may remain on the port before a server initiated disconnect will occur, rounded up to the nearest minute. To set no limit on the amount of time that the current ARAP user may continue to be connected, set this object to the maximum value in the range. Gets return -1 if no ARAP user is currently connected on the port or if ARAP is not enabled on the port. Gets also return -1 if there is a user connected and there is no limit on the amount of time that the current user may be connected.
OBJECT-TYPE    
  INTEGER  

xPpp 1.3.6.1.4.1.33.22
OBJECT IDENTIFIER    

xPppBasic 1.3.6.1.4.1.33.22.1
OBJECT IDENTIFIER    

xPppConfigTable 1.3.6.1.4.1.33.22.1.1
A table containing PPP specific variables for this PPP implementation.
OBJECT-TYPE    
  SEQUENCE OF  
    XPppConfigEntry

xPppConfigEntry 1.3.6.1.4.1.33.22.1.1.1
Management information about a particular PPP.
OBJECT-TYPE    
  XPppConfigEntry  

xPppConfigOpen 1.3.6.1.4.1.33.22.1.1.1.1
Determines if PPP is configured on this port.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

xPppConfigActive 1.3.6.1.4.1.33.22.1.1.1.2
Determines if LCP will actively open or wait passively.
OBJECT-TYPE    
  INTEGER active(1), passive(2)  

xPppConfigDefaults 1.3.6.1.4.1.33.22.1.1.1.3
Revert to factory default PPP parameters. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' sets PPP parameters to factory defaults.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

xPppConfigRestartTimer 1.3.6.1.4.1.33.22.1.1.1.4
The number of seconds waited before retransmitting during option negotiation.
OBJECT-TYPE    
  INTEGER 1..10  

xPppConfigConfLimit 1.3.6.1.4.1.33.22.1.1.1.5
Maximum number of times a configuration request will be sent to the peer without receiving a response.
OBJECT-TYPE    
  INTEGER 2..10  

xPppConfigFailLimit 1.3.6.1.4.1.33.22.1.1.1.6
Maximum number of times a peer's proposed option will be NAKed before REJECTing the option.
OBJECT-TYPE    
  INTEGER 2..10  

xPppConfigPacketLogging 1.3.6.1.4.1.33.22.1.1.1.7
Determines the level of packet logging to accounting on this port.
OBJECT-TYPE    
  INTEGER none(1), raw(2), interpreted(3)  

xPppConfigKATimer 1.3.6.1.4.1.33.22.1.1.1.8
Determines the number of seconds between transmission of LCP Echo Keepalive packets.
OBJECT-TYPE    
  INTEGER 0..255  

xPppConfigKATimeout 1.3.6.1.4.1.33.22.1.1.1.9
Determines the number of seconds to wait to hear LCP Echo Replies to our Echo Request Keepalive packets before giving up and shutting down the link.
OBJECT-TYPE    
  INTEGER  

xPppStatusTable 1.3.6.1.4.1.33.22.1.2
A table containing basic PPP status info.
OBJECT-TYPE    
  SEQUENCE OF  
    XPppStatusEntry

xPppStatusEntry 1.3.6.1.4.1.33.22.1.2.1
Status information about a particular PPP.
OBJECT-TYPE    
  XPppStatusEntry  

xPppStatusState 1.3.6.1.4.1.33.22.1.2.1.1
Displays whether PPP is enabled or disabled on this port.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

xPppLinkOpen 1.3.6.1.4.1.33.22.1.2.1.2
Displays open status of the link.
OBJECT-TYPE    
  INTEGER notOpen(1), open(2)  

xPppHdlcRxTotalPkts 1.3.6.1.4.1.33.22.1.2.1.3
Total of all packets received on PPP link.
OBJECT-TYPE    
  Counter  

xPppHdlcTxTotalPkts 1.3.6.1.4.1.33.22.1.2.1.4
Total of all packets transmitted on PPP link.
OBJECT-TYPE    
  Counter  

xPppHdlcRxFrameErrs 1.3.6.1.4.1.33.22.1.2.1.5
Number of framing errors received on PPP link.
OBJECT-TYPE    
  Counter  

xPppHdlcRxNoBuffer 1.3.6.1.4.1.33.22.1.2.1.6
Number of times a buffer was not available to receive packet into.
OBJECT-TYPE    
  Counter  

xPppHdlcTxNoBuffer 1.3.6.1.4.1.33.22.1.2.1.7
Number of times a buffer was not available to transmit a packet from.
OBJECT-TYPE    
  Counter  

xPppHdlcRxBadFcs 1.3.6.1.4.1.33.22.1.2.1.8
Number of packets received with a bad checksum.
OBJECT-TYPE    
  Counter  

xPppHdlcVJDiscards 1.3.6.1.4.1.33.22.1.2.1.9
Number of packets received that failed VJ decompression.
OBJECT-TYPE    
  Counter  

xPppLcp 1.3.6.1.4.1.33.22.2
OBJECT IDENTIFIER    

xPppLcpConfigTable 1.3.6.1.4.1.33.22.2.1
A table containing PPP LCP specific variables for this PPP implementation.
OBJECT-TYPE    
  SEQUENCE OF  
    XPppLcpConfigEntry

xPppLcpConfigEntry 1.3.6.1.4.1.33.22.2.1.1
Management information about a particular PPP LCP session.
OBJECT-TYPE    
  XPppLcpConfigEntry  

xPppLcpConfigAuth 1.3.6.1.4.1.33.22.2.1.1.1
Authentication protocol used for authenticating peers.
OBJECT-TYPE    
  INTEGER none(1), pap(2)  

xPppLcpConfigChapAuth 1.3.6.1.4.1.33.22.2.1.1.2
Authentication CHAP protocol used for authenticating peers.
OBJECT-TYPE    
  INTEGER none(1), chap(2)  

xPppLcpStatusTable 1.3.6.1.4.1.33.22.2.2
A table containing PPP LCP status info.
OBJECT-TYPE    
  SEQUENCE OF  
    XPppLcpStatusEntry

xPppLcpStatusEntry 1.3.6.1.4.1.33.22.2.2.1
Status information about a particular PPP LCP session.
OBJECT-TYPE    
  XPppLcpStatusEntry  

xPppLcpStatusState 1.3.6.1.4.1.33.22.2.2.1.1
The current state of LCP.
OBJECT-TYPE    
  INTEGER closed(1), listen(2), requestSent(3), ackReceived(4), ackSent(5), open(6), closing(7)  

xPppLcpStatusRxAuth 1.3.6.1.4.1.33.22.2.2.1.2
The authentication protocol currently in use from the peer to us.
OBJECT-TYPE    
  INTEGER none(1), pap(2)  

xPppLcpStatusTxAuth 1.3.6.1.4.1.33.22.2.2.1.3
The authentication protocol currently in use from us to the peer.
OBJECT-TYPE    
  INTEGER none(1), pap(2)  

xPppLcpStatusRxConReq 1.3.6.1.4.1.33.22.2.2.1.4
The count of LCP Configure Requests received from the peer.
OBJECT-TYPE    
  Counter  

xPppLcpStatusTxConReq 1.3.6.1.4.1.33.22.2.2.1.5
The count of LCP Configure Requests transmitted to the peer.
OBJECT-TYPE    
  Counter  

xPppLcpStatusRxConNak 1.3.6.1.4.1.33.22.2.2.1.6
The count of LCP Configure Naks received from the peer.
OBJECT-TYPE    
  Counter  

xPppLcpStatusTxConNak 1.3.6.1.4.1.33.22.2.2.1.7
The count of LCP Configure Naks transmitted to the peer.
OBJECT-TYPE    
  Counter  

xPppLcpStatusRxConAck 1.3.6.1.4.1.33.22.2.2.1.8
The count of LCP Configure Acks received from the peer.
OBJECT-TYPE    
  Counter  

xPppLcpStatusTxConAck 1.3.6.1.4.1.33.22.2.2.1.9
The count of LCP Configure Acks transmitted to the peer.
OBJECT-TYPE    
  Counter  

xPppLcpStatusRxConRej 1.3.6.1.4.1.33.22.2.2.1.10
The count of LCP Configure Rejects received from the peer.
OBJECT-TYPE    
  Counter  

xPppLcpStatusTxConRej 1.3.6.1.4.1.33.22.2.2.1.11
The count of LCP Configure Rejects transmitted to the peer.
OBJECT-TYPE    
  Counter  

xPppLcpStatusRxTrmReq 1.3.6.1.4.1.33.22.2.2.1.12
The count of LCP Terminate Requests received from the peer.
OBJECT-TYPE    
  Counter  

xPppLcpStatusTxTrmReq 1.3.6.1.4.1.33.22.2.2.1.13
The count of LCP Terminate Requests transmitted to the peer.
OBJECT-TYPE    
  Counter  

xPppLcpStatusRxTrmAck 1.3.6.1.4.1.33.22.2.2.1.14
The count of LCP Terminate Acks received from the peer.
OBJECT-TYPE    
  Counter  

xPppLcpStatusTxTrmAck 1.3.6.1.4.1.33.22.2.2.1.15
The count of LCP Terminate Acks transmitted to the peer.
OBJECT-TYPE    
  Counter  

xPppLcpStatusRxEcoReq 1.3.6.1.4.1.33.22.2.2.1.16
The count of LCP Echo Requests received from the peer.
OBJECT-TYPE    
  Counter  

xPppLcpStatusTxEcoReq 1.3.6.1.4.1.33.22.2.2.1.17
The count of LCP Echo Requests transmitted to the peer.
OBJECT-TYPE    
  Counter  

xPppLcpStatusRxEcoRep 1.3.6.1.4.1.33.22.2.2.1.18
The count of LCP Echo Reply received from the peer.
OBJECT-TYPE    
  Counter  

xPppLcpStatusTxEcoRep 1.3.6.1.4.1.33.22.2.2.1.19
The count of LCP Echo Reply transmitted to the peer.
OBJECT-TYPE    
  Counter  

xPppLcpStatusRxCodRej 1.3.6.1.4.1.33.22.2.2.1.20
The count of LCP Code Rejects received from the peer.
OBJECT-TYPE    
  Counter  

xPppLcpStatusTxCodRej 1.3.6.1.4.1.33.22.2.2.1.21
The count of LCP Code Rejects transmitted to the peer.
OBJECT-TYPE    
  Counter  

xPppLcpStatusRxProRej 1.3.6.1.4.1.33.22.2.2.1.22
The count of LCP Protocol Rejects received from the peer.
OBJECT-TYPE    
  Counter  

xPppLcpStatusTxProRej 1.3.6.1.4.1.33.22.2.2.1.23
The count of LCP Protocol Rejects transmitted to the peer.
OBJECT-TYPE    
  Counter  

xPppLcpStatusState2 1.3.6.1.4.1.33.22.2.2.1.24
The current state of LCP.
OBJECT-TYPE    
  INTEGER initial(1), starting(2), closed(3), stopped(4), closing(5), stopping(6), reqSent(7), ackRcvd(8), ackSent(9), opened(10)  

xPppIpcp 1.3.6.1.4.1.33.22.3
OBJECT IDENTIFIER    

xPppIpcpConfigTable 1.3.6.1.4.1.33.22.3.1
A table containing PPP IPCPspecific variables for this PPP implementation.
OBJECT-TYPE    
  SEQUENCE OF  
    XPppIpcpConfigEntry

xPppIpcpConfigEntry 1.3.6.1.4.1.33.22.3.1.1
Management information about a particular PPP IPCP session.
OBJECT-TYPE    
  XPppIpcpConfigEntry  

xPppIpcpConfigLocalAddress 1.3.6.1.4.1.33.22.3.1.1.1
IP Address of the local PPP interface.
OBJECT-TYPE    
  IpAddress  

xPppIpcpConfigRemoteAddress 1.3.6.1.4.1.33.22.3.1.1.2
IP Address of the peer PPP interface.
OBJECT-TYPE    
  IpAddress  

xPppIpcpConfigVJCompSlots 1.3.6.1.4.1.33.22.3.1.1.3
Number of slots to be used by VJ compression.
OBJECT-TYPE    
  INTEGER 3..15  

xPppIpcpConfigRangeStart 1.3.6.1.4.1.33.22.3.1.1.4
Start of acceptable address range in which the negotiated remote IP address must fall.
OBJECT-TYPE    
  IpAddress  

xPppIpcpConfigRangeEnd 1.3.6.1.4.1.33.22.3.1.1.5
End of acceptable address range in which the negotiated remote IP address must fall.
OBJECT-TYPE    
  IpAddress  

xPppIpcpConfigState 1.3.6.1.4.1.33.22.3.1.1.6
Controls whether IPCP is allowed to run on this port.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

xPppIpcpConfigLocalRangeStart 1.3.6.1.4.1.33.22.3.1.1.7
Start of acceptable address range in which the negotiated local IP address must fall.
OBJECT-TYPE    
  IpAddress  

xPppIpcpConfigLocalRangeEnd 1.3.6.1.4.1.33.22.3.1.1.8
End of acceptable address range in which the negotiated local IP address must fall.
OBJECT-TYPE    
  IpAddress  

xPppIpcpConfigPppIpMask 1.3.6.1.4.1.33.22.3.1.1.9
The subnet mask to use for a PPP operation on the port. Corresponds directly to the value labeled 'IP Mask:' in the PPP PORT IP CHARACTERISTICS display.
OBJECT-TYPE    
  IpAddress  

xPppIpcpAsyncConfigTable 1.3.6.1.4.1.33.22.3.2
A table containing PPP specific variables for this PPP implementation.
OBJECT-TYPE    
  SEQUENCE OF  
    XPppIpcpAsyncConfigEntry

xPppIpcpAsyncConfigEntry 1.3.6.1.4.1.33.22.3.2.1
Management information about a particular PPP Asynchronous LCP.
OBJECT-TYPE    
  XPppIpcpAsyncConfigEntry  

xPppIpcpAsyncConfigBrdcast 1.3.6.1.4.1.33.22.3.2.1.1
Determines whether to forward an IP Broadcast or not.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

xPppIpcpStatusTable 1.3.6.1.4.1.33.22.3.3
A table containing basic PPP IPCP status info.
OBJECT-TYPE    
  SEQUENCE OF  
    XPppIpcpStatusEntry

xPppIpcpStatusEntry 1.3.6.1.4.1.33.22.3.3.1
Status information about a particular PPP IPCP session.
OBJECT-TYPE    
  XPppIpcpStatusEntry  

xPppIpcpStatusState 1.3.6.1.4.1.33.22.3.3.1.1
The current state of IPCP.
OBJECT-TYPE    
  INTEGER closed(1), listen(2), requestSent(3), ackReceived(4), ackSent(5), open(6), closing(7)  

xPppIpcpStatusLocalAddress 1.3.6.1.4.1.33.22.3.3.1.2
The IP Address currently being used by the local IPCP.
OBJECT-TYPE    
  IpAddress  

xPppIpcpStatusRemoteAddress 1.3.6.1.4.1.33.22.3.3.1.3
The IP Address currently being used by the Remote IPCP.
OBJECT-TYPE    
  IpAddress  

xPppIpcpRxPkts 1.3.6.1.4.1.33.22.3.3.1.4
Total number of IP packets received.
OBJECT-TYPE    
  Counter  

xPppIpcpTxPkts 1.3.6.1.4.1.33.22.3.3.1.5
Total number of IP packets transmitted.
OBJECT-TYPE    
  Counter  

xPppIpcpRxConReq 1.3.6.1.4.1.33.22.3.3.1.6
The count of IPCP Configure Requests received from the peer.
OBJECT-TYPE    
  Counter  

xPppIpcpTxConReq 1.3.6.1.4.1.33.22.3.3.1.7
The count of IPCP Configure Requests transmitted to the peer.
OBJECT-TYPE    
  Counter  

xPppIpcpRxConNak 1.3.6.1.4.1.33.22.3.3.1.8
The count of IPCP Configure Naks received from the peer.
OBJECT-TYPE    
  Counter  

xPppIpcpTxConNak 1.3.6.1.4.1.33.22.3.3.1.9
The count of IPCP Configure Naks transmitted to the peer.
OBJECT-TYPE    
  Counter  

xPppIpcpRxConAck 1.3.6.1.4.1.33.22.3.3.1.10
The count of IPCP Configure Acks received from the peer.
OBJECT-TYPE    
  Counter  

xPppIpcpTxConAck 1.3.6.1.4.1.33.22.3.3.1.11
The count of IPCP Configure Acks transmitted to the peer.
OBJECT-TYPE    
  Counter  

xPppIpcpRxConRej 1.3.6.1.4.1.33.22.3.3.1.12
The count of IPCP Configure Rejects received from the peer.
OBJECT-TYPE    
  Counter  

xPppIpcpTxConRej 1.3.6.1.4.1.33.22.3.3.1.13
The count of IPCP Configure Rejects transmitted to the peer.
OBJECT-TYPE    
  Counter  

xPppIpcpRxTrmReq 1.3.6.1.4.1.33.22.3.3.1.14
The count of IPCP Terminate Requests received from the peer.
OBJECT-TYPE    
  Counter  

xPppIpcpTxTrmReq 1.3.6.1.4.1.33.22.3.3.1.15
The count of IPCP Terminate Requests transmitted to the peer.
OBJECT-TYPE    
  Counter  

xPppIpcpRxTrmAck 1.3.6.1.4.1.33.22.3.3.1.16
The count of IPCP Terminate Acks received from the peer.
OBJECT-TYPE    
  Counter  

xPppIpcpTxTrmAck 1.3.6.1.4.1.33.22.3.3.1.17
The count of IPCP Terminate Acks transmitted to the peer.
OBJECT-TYPE    
  Counter  

xPppIpcpStatusState2 1.3.6.1.4.1.33.22.3.3.1.18
The current state of IPCP.
OBJECT-TYPE    
  INTEGER initial(1), starting(2), closed(3), stopped(4), closing(5), stopping(6), reqSent(7), ackRcvd(8), ackSent(9), opened(10)  

xPppAuth 1.3.6.1.4.1.33.22.4
OBJECT IDENTIFIER    

xPppPapPassword 1.3.6.1.4.1.33.22.4.1
The password to use for PAP authentication.
OBJECT-TYPE    
  OCTET STRING SIZE(0..16)  

xPppAuthConfigTable 1.3.6.1.4.1.33.22.4.2
A table containing PPP specific variables for this PPP implementation.
OBJECT-TYPE    
  SEQUENCE OF  
    XPppAuthConfigEntry

xPppAuthConfigEntry 1.3.6.1.4.1.33.22.4.2.1
Management information about a particular PPP.
OBJECT-TYPE    
  XPppAuthConfigEntry  

xPppAuthChapChallengeTimer 1.3.6.1.4.1.33.22.4.2.1.4
Length of time in minutes between CHAP reauthentication challenges. A value of zero disables the timer.
OBJECT-TYPE    
  INTEGER 0..120  

xPppAuthPapConfigState 1.3.6.1.4.1.33.22.4.2.1.5
Controls the type of Pap authentication required for this port, and whether it is combined with another authentication mechanism such as Radius.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2), kerberos(3), radius(4)  

xPppAuthChapConfigState 1.3.6.1.4.1.33.22.4.2.1.6
Controls the type of Chap authentication required for this port, and whether it is combined with another authentication mechanism such as Radius.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2), radius(4)  

xPppAuthStatusTable 1.3.6.1.4.1.33.22.4.3
A table containing PPP specific variables for this PPP implementation.
OBJECT-TYPE    
  SEQUENCE OF  
    XPppAuthStatusEntry

xPppAuthStatusEntry 1.3.6.1.4.1.33.22.4.3.1
Management information about a particular PPP.
OBJECT-TYPE    
  XPppAuthStatusEntry  

xPppPapStatusState 1.3.6.1.4.1.33.22.4.3.1.4
The current state of PAP.
OBJECT-TYPE    
  INTEGER initial(1), closed(2), stopped(3), closing(4), reqSent(5), ackRecv(6), ackSent(7), opened(8), kerberosReqSent(9), kerberosStopped(10), kerberosAckRecv(11), kerberosAckSent(12), papKerberosOpened(13)  

xPppChapStatusState 1.3.6.1.4.1.33.22.4.3.1.5
The current state of CHAP.
OBJECT-TYPE    
  INTEGER idle(1), challengeWait(2), challengeSent(3), responseSent(4), challengeSentResponseSent(5), challengeSentAckRecv(6), open(7)  

xPppChapPassword 1.3.6.1.4.1.33.22.4.4
The password to use for CHAP authentication.
OBJECT-TYPE    
  OCTET STRING SIZE(0..16)  

xPppIpxcp 1.3.6.1.4.1.33.22.5
OBJECT IDENTIFIER    

xPppIpxcpConfigTable 1.3.6.1.4.1.33.22.5.1
A table containing PPP specific variables for this PPP implementation.
OBJECT-TYPE    
  SEQUENCE OF  
    XPppIpxcpConfigEntry

xPppIpxcpConfigEntry 1.3.6.1.4.1.33.22.5.1.1
Management information about a particular PPP.
OBJECT-TYPE    
  XPppIpxcpConfigEntry  

xPppIpxcpCipxCompression 1.3.6.1.4.1.33.22.5.1.1.1
Controls whether CIPX compression will be negotiated on the interface.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

xPppIpxcpConfigRemoteNode 1.3.6.1.4.1.33.22.5.1.1.2
The IPX Node address which can be offered to the peer if it does not know a Node number but requires one.
OBJECT-TYPE    
  OCTET STRING SIZE(6)  

xPppIpxcpStatusTable 1.3.6.1.4.1.33.22.5.2
A table containing PPP specific variables for this PPP implementation.
OBJECT-TYPE    
  SEQUENCE OF  
    XPppIpxcpStatusEntry

xPppIpxcpStatusEntry 1.3.6.1.4.1.33.22.5.2.1
Management information about a particular PPP.
OBJECT-TYPE    
  XPppIpxcpStatusEntry  

xPppIpxcpStatusState 1.3.6.1.4.1.33.22.5.2.1.1
The current state of IPXCP.
OBJECT-TYPE    
  INTEGER initial(1), starting(2), closed(3), stopped(4), closing(5), stopping(6), reqSent(7), ackRcvd(8), ackSent(9), opened(10)  

xPppIpxcpCipxInCompression 1.3.6.1.4.1.33.22.5.2.1.2
The current state of CIPX compression inbound.
OBJECT-TYPE    
  INTEGER open(1), closed(2)  

xPppIpxcpCipxOutCompression 1.3.6.1.4.1.33.22.5.2.1.3
The current state of CIPX compression outbound.
OBJECT-TYPE    
  INTEGER open(1), closed(2)  

xPppIpxcpCipxInSlots 1.3.6.1.4.1.33.22.5.2.1.4
The current number of CIPX compression inbound slots.
OBJECT-TYPE    
  INTEGER  

xPppIpxcpCipxOutSlots 1.3.6.1.4.1.33.22.5.2.1.5
The current number of CIPX compression outbound slots.
OBJECT-TYPE    
  INTEGER  

xPppIpxcpStatusRemoteNode 1.3.6.1.4.1.33.22.5.2.1.6
The IPX Node address currently being used by the Remote IPX peer.
OBJECT-TYPE    
  OCTET STRING SIZE(6)  

xPppIpxcpCountersTable 1.3.6.1.4.1.33.22.5.3
A table containing basic PPP IPXCP status info.
OBJECT-TYPE    
  SEQUENCE OF  
    XPppIpxcpCountersEntry

xPppIpxcpCountersEntry 1.3.6.1.4.1.33.22.5.3.1
Counter information about a particular PPP IPXCP session.
OBJECT-TYPE    
  XPppIpxcpCountersEntry  

xPppIpxcpRxConReq 1.3.6.1.4.1.33.22.5.3.1.1
The count of IPXCP Configure Requests received from the peer.
OBJECT-TYPE    
  Counter  

xPppIpxcpTxConReq 1.3.6.1.4.1.33.22.5.3.1.2
The count of IPXCP Configure Requests transmitted to the peer.
OBJECT-TYPE    
  Counter  

xPppIpxcpRxConNak 1.3.6.1.4.1.33.22.5.3.1.3
The count of IPXCP Configure Naks received from the peer.
OBJECT-TYPE    
  Counter  

xPppIpxcpTxConNak 1.3.6.1.4.1.33.22.5.3.1.4
The count of IPXCP Configure Naks transmitted to the peer.
OBJECT-TYPE    
  Counter  

xPppIpxcpRxConAck 1.3.6.1.4.1.33.22.5.3.1.5
The count of IPXCP Configure Acks received from the peer.
OBJECT-TYPE    
  Counter  

xPppIpxcpTxConAck 1.3.6.1.4.1.33.22.5.3.1.6
The count of IPXCP Configure Acks transmitted to the peer.
OBJECT-TYPE    
  Counter  

xPppIpxcpRxConRej 1.3.6.1.4.1.33.22.5.3.1.7
The count of IPXCP Configure Rejects received from the peer.
OBJECT-TYPE    
  Counter  

xPppIpxcpTxConRej 1.3.6.1.4.1.33.22.5.3.1.8
The count of IPXCP Configure Rejects transmitted to the peer.
OBJECT-TYPE    
  Counter  

xPppIpxcpRxTrmReq 1.3.6.1.4.1.33.22.5.3.1.9
The count of IPXCP Terminate Requests received from the peer.
OBJECT-TYPE    
  Counter  

xPppIpxcpTxTrmReq 1.3.6.1.4.1.33.22.5.3.1.10
The count of IPXCP Terminate Requests transmitted to the peer.
OBJECT-TYPE    
  Counter  

xPppIpxcpRxTrmAck 1.3.6.1.4.1.33.22.5.3.1.11
The count of IPXCP Terminate Acks received from the peer.
OBJECT-TYPE    
  Counter  

xPppIpxcpTxTrmAck 1.3.6.1.4.1.33.22.5.3.1.12
The count of IPXCP Terminate Acks transmitted to the peer.
OBJECT-TYPE    
  Counter  

sysLoginAuthenticationFailure 1.3.6.1.4.1.33.28
Indicates when and where a user attempted and failed to access the system.
TRAP-TYPE    
  sysLoginAuthFailureTrapType  
  sysLoginAuthTrapIdentity  

contactClosureChanged 1.3.6.1.4.1.33.30
Indication that the contact closure transitioned to open or closed.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

powerAlarmFuseBankA 1.3.6.1.4.1.33.31
Indicates that a fuse from bank A tripped its breaker, or that it went operational. However, it is unlikely that a trap would be issued when the fuse starts working.
TRAP-TYPE    
  basicPowerStatusFuseA  
  sysLocation  

powerAlarmFuseBankB 1.3.6.1.4.1.33.32
Indicates that a fuse from bank B tripped its breaker, or that it went operational. However, it is unlikely that a trap would be issued when the fuse starts working.
TRAP-TYPE    
  basicPowerStatusFuseB  
  sysLocation  

powerSupplyAlarmA 1.3.6.1.4.1.33.33
Indicates that power supply A lost or regained power. However, it is unlikely that a trap would be issued when the power comes on.
TRAP-TYPE    
  basicPowerSupplyStatusA  
  sysLocation  

powerSupplyAlarmB 1.3.6.1.4.1.33.34
Indicates that power supply B lost or regained power. However, it is unlikely that a trap would be issued when the power comes on.
TRAP-TYPE    
  basicPowerSupplyStatusB  
  sysLocation  

portInputSignalChange 1.3.6.1.4.1.33.35
Indicates that an input signal on a port has transitioned to the state indicated in the variable rs232InSigState.
TRAP-TYPE    
  rs232InSigState  
  sysLocation  
  rs232PortIndex  

xRadius 1.3.6.1.4.1.33.35
OBJECT IDENTIFIER    

xRadiusPort 1.3.6.1.4.1.33.35.1
OBJECT IDENTIFIER    

xRadiusPortTable 1.3.6.1.4.1.33.35.1.1
Table of fields indexed by port.
OBJECT-TYPE    
  SEQUENCE OF  
    XRadiusPortEntry

xRadiusPortEntry 1.3.6.1.4.1.33.35.1.1.1
A particular entry.
OBJECT-TYPE    
  XRadiusPortEntry  

xRadiusPortIndex 1.3.6.1.4.1.33.35.1.1.1.1
The index of the port.
OBJECT-TYPE    
  INTEGER  

xRadiusPortStatus 1.3.6.1.4.1.33.35.1.1.1.2
Indicates the state of Radius Authentication on the port.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

xRadiusPortSolicitStatus 1.3.6.1.4.1.33.35.1.1.1.3
Indicates the state of Radius solicitation mode on the port.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

xRadiusAcctPortStatus 1.3.6.1.4.1.33.35.1.1.1.4
Indicates the state of Radius Accounting on the port.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2), limited(3)  

xRadiusCircuit 1.3.6.1.4.1.33.35.2
OBJECT IDENTIFIER    

xRadiusConfig 1.3.6.1.4.1.33.35.3
OBJECT IDENTIFIER    

xRadiusAuthServerPort 1.3.6.1.4.1.33.35.3.1
The UDP port on which the Radius authentication request will be made.
OBJECT-TYPE    
  INTEGER 0..65535  

xRadiusAcctServerPort 1.3.6.1.4.1.33.35.3.2
The UDP port on which the Radius accounting request will be made.
OBJECT-TYPE    
  INTEGER 0..65535  

xRadiusTimeout 1.3.6.1.4.1.33.35.3.3
The period of time that the Radius client will wait for a reply from the server.
OBJECT-TYPE    
  INTEGER 1..255  

xRadiusServerRetries 1.3.6.1.4.1.33.35.3.4
The number of times a Radius server will be tried.
OBJECT-TYPE    
  INTEGER 1..10  

xRadiusAcctLogAttempts 1.3.6.1.4.1.33.35.3.5
The number of times the client will attempt to log the accounting record to either the primary or secondary Radius server before giving up and failing.
OBJECT-TYPE    
  INTEGER 1..50000  

xRadiusChapChallengeSize 1.3.6.1.4.1.33.35.3.6
The size of the CHAP challenge that is sent to the peer and the Radius server.
OBJECT-TYPE    
  INTEGER 4..128  

xRadiusLogging 1.3.6.1.4.1.33.35.3.7
Indicates the state of Radius logging for packet tracing and troubleshooting. Messages are logged to the MRV In-Reach event log.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

xRadiusMessage 1.3.6.1.4.1.33.35.3.8
The authentication prompting message for Radius logins.
OBJECT-TYPE    
  DisplayString SIZE(40)  

xRadiusServers 1.3.6.1.4.1.33.35.4
OBJECT IDENTIFIER    

xRadServer1SubGrp 1.3.6.1.4.1.33.35.4.1
OBJECT IDENTIFIER    

xRadiusServerName1 1.3.6.1.4.1.33.35.4.1.1
The primary Radius server queried for authentication.
OBJECT-TYPE    
  OCTET STRING SIZE(51)  

xRadiusSecret1 1.3.6.1.4.1.33.35.4.1.2
The secret value used to communicate with the primary Radius server.
OBJECT-TYPE    
  OCTET STRING SIZE(32)  

xRadiusServerAccess1 1.3.6.1.4.1.33.35.4.1.3
The number of successful accesses of primary Radius server.
OBJECT-TYPE    
  Counter  

xRadiusServerAccessFailed1 1.3.6.1.4.1.33.35.4.1.4
The number of failed accesses of primary Radius server.
OBJECT-TYPE    
  Counter  

xRadServer2SubGrp 1.3.6.1.4.1.33.35.4.2
OBJECT IDENTIFIER    

xRadiusServerName2 1.3.6.1.4.1.33.35.4.2.1
The secondary Radius server queried for authentication, if the primary one fails.
OBJECT-TYPE    
  OCTET STRING SIZE(51)  

xRadiusSecret2 1.3.6.1.4.1.33.35.4.2.2
The secret value used to communicate with the secondary Radius server.
OBJECT-TYPE    
  OCTET STRING SIZE(32)  

xRadiusServerAccess2 1.3.6.1.4.1.33.35.4.2.3
The number of successful accesses of secondary Radius server.
OBJECT-TYPE    
  Counter  

xRadiusServerAccessFailed2 1.3.6.1.4.1.33.35.4.2.4
The number of failed accesses of secondary Radius server.
OBJECT-TYPE    
  Counter  

xRadiusCounters 1.3.6.1.4.1.33.35.5
OBJECT IDENTIFIER    

xRadAuthCtsSubGrp 1.3.6.1.4.1.33.35.5.1
OBJECT IDENTIFIER    

xRadiusLogins 1.3.6.1.4.1.33.35.5.1.1
The number of successful logins using Radius.
OBJECT-TYPE    
  Counter  

xRadiusLoginsFailed 1.3.6.1.4.1.33.35.5.1.2
The number of failed logins resulting from being rejected by the Radius server.
OBJECT-TYPE    
  Counter  

xRadiusConfigFailed 1.3.6.1.4.1.33.35.5.1.3
The number of failed logins resulting from unsupported attribute values.
OBJECT-TYPE    
  Counter  

xRadiusPolicyFailed 1.3.6.1.4.1.33.35.5.1.4
The number of failed logins resulting from failing specific Radius policies on the MRV In-Reach unit.
OBJECT-TYPE    
  Counter  

xRadAcctCtsSubGrp 1.3.6.1.4.1.33.35.5.2
OBJECT IDENTIFIER    

xRadiusAcctSuccess 1.3.6.1.4.1.33.35.5.2.1
The number of successfully recorded Radius accounting log records.
OBJECT-TYPE    
  Counter  

xRadiusAcctFailed 1.3.6.1.4.1.33.35.5.2.2
The number of failed (not logged) Radius accounting log records.
OBJECT-TYPE    
  Counter  

xRadiusAcctReqWait 1.3.6.1.4.1.33.35.5.2.3
The number of log requests waiting for a reply from the Radius server.
OBJECT-TYPE    
  Counter  

portOutputSignalChange 1.3.6.1.4.1.33.36
Indicates that an output signal on a port has transitioned to the state indicated in the variable rs232OutSigState.
TRAP-TYPE    
  rs232OutSigState  
  sysLocation  
  rs232PortIndex  

humidityThresholdExceeded 1.3.6.1.4.1.33.37
Indication that the humidity exceeded a threshhold and the value of the currrent humidity.
TRAP-TYPE    
  basicHumidityValue  
  basicTemperatureHumiditySensorName  
  sysLocation  
  basicHumiditySensorIndex  
  basicHumidityAlarmStatus  

temperatureThresholdExceeded 1.3.6.1.4.1.33.38
Indication that the temperature exceeded a threshhold and the value of the currrent temperature.
TRAP-TYPE    
  basicTemperatureValue  
  basicTemperatureHumiditySensorName  
  sysLocation  
  basicTemperatureSensorIndex  
  basicTemperatureAlarmStatus  

alarmMasterNotResponding 1.3.6.1.4.1.33.39
Indication that the high density alarm management device lost or regained contact with the inReach port to which it was connected as indicated by the basicPortAlarmMasterStatus variable.
TRAP-TYPE    
  basicPortIndex  
  sysLocation  
  basicPortAlarmMasterStatus  

alarmMasterInputStateChange 1.3.6.1.4.1.33.41
Indication that the alarm input point within a high density alarm management port transitioned to open or closed.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  

asciiToTrapTranslation 1.3.6.1.4.1.33.42
This trap contains ASCII data, which arrived at serial port, was formatted as a trap, and sent out on the network.
TRAP-TYPE    
  basicPortAsciiToTrapTranslationTrapSeverity  
  basicPortAsciiToTrapTranslationLastMessage  

powerMasterNotResponding 1.3.6.1.4.1.33.43
Indication that the power management port lost or regained contact with the power unit to which it was connected as indicated by the basicPortPowerMasterDeviceStatus variable.
TRAP-TYPE    
  basicPortIndex  
  sysLocation  
  basicPortPowerMasterDeviceStatus  

temperatureNormal 1.3.6.1.4.1.33.44
Indication that the temperature returned within bounds, and the value of the currrent temperature.
TRAP-TYPE    
  basicTemperatureValue  
  basicTemperatureHumiditySensorName  
  sysLocation  
  basicTemperatureSensorIndex  
  basicTemperatureAlarmStatus  

humidityNormal 1.3.6.1.4.1.33.45
Indication that the humidity returned within bounds, and the currrent humidity reading.
TRAP-TYPE    
  basicHumidityValue  
  basicTemperatureHumiditySensorName  
  sysLocation  
  basicHumiditySensorIndex  
  basicHumidityAlarmStatus  

alarmMasterSideAOff 1.3.6.1.4.1.33.46
Indication that side A powered off in the attached IR7104 alarm unit due to DC rail fluctuations.
TRAP-TYPE    
  sysLocation  
  basicPortIndex  

alarmMasterSideBOff 1.3.6.1.4.1.33.47
Indication that side B powered off in the attached IR7104 alarm unit due to DC rail fluctuations.
TRAP-TYPE    
  sysLocation  
  basicPortIndex  

alarmMasterSideAOn 1.3.6.1.4.1.33.48
Indication that side A powered on in the attached IR7104 alarm unit after previous power off.
TRAP-TYPE    
  sysLocation  
  basicPortIndex  

alarmMasterSideBOn 1.3.6.1.4.1.33.49
Indication that side B powered on in the attached IR7104 alarm unit after previous power off.
TRAP-TYPE    
  sysLocation  
  basicPortIndex  

xAlarm 1.3.6.1.4.1.33.49
OBJECT IDENTIFIER    

icmpPingHostNotReachable 1.3.6.1.4.1.33.50
Indication that the icmp Ping Host is not reachable after polling for icmpPingHostMaximumRetries.
TRAP-TYPE    
  icmpPingHostAddress  
  icmpPingHostDescription  
  sysLocation  
  icmpPingHostPollingInterval  
  icmpPingHostMaximumRetries  
  icmpPingHostStatus  

icmpPingHostResponding 1.3.6.1.4.1.33.51
Indication that the icmp Ping Host is reachable again after a failure.
TRAP-TYPE    
  icmpPingHostAddress  
  icmpPingHostDescription  
  sysLocation  
  icmpPingHostPollingInterval  
  icmpPingHostMaximumRetries  
  icmpPingHostStatus  

alarmInputLowDensity0001Alarm 1.3.6.1.4.1.33.10001
Generated when alarm point 1 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0002Alarm 1.3.6.1.4.1.33.10002
Generated when alarm point 2 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0003Alarm 1.3.6.1.4.1.33.10003
Generated when alarm point 3 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0004Alarm 1.3.6.1.4.1.33.10004
Generated when alarm point 4 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0005Alarm 1.3.6.1.4.1.33.10005
Generated when alarm point 5 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0006Alarm 1.3.6.1.4.1.33.10006
Generated when alarm point 6 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0007Alarm 1.3.6.1.4.1.33.10007
Generated when alarm point 7 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0008Alarm 1.3.6.1.4.1.33.10008
Generated when alarm point 8 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0009Alarm 1.3.6.1.4.1.33.10009
Generated when alarm point 9 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0010Alarm 1.3.6.1.4.1.33.10010
Generated when alarm point 10 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0011Alarm 1.3.6.1.4.1.33.10011
Generated when alarm point 11 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0012Alarm 1.3.6.1.4.1.33.10012
Generated when alarm point 12 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0013Alarm 1.3.6.1.4.1.33.10013
Generated when alarm point 13 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0014Alarm 1.3.6.1.4.1.33.10014
Generated when alarm point 14 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0015Alarm 1.3.6.1.4.1.33.10015
Generated when alarm point 15 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0016Alarm 1.3.6.1.4.1.33.10016
Generated when alarm point 16 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0017Alarm 1.3.6.1.4.1.33.10017
Generated when alarm point 17 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0018Alarm 1.3.6.1.4.1.33.10018
Generated when alarm point 18 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0019Alarm 1.3.6.1.4.1.33.10019
Generated when alarm point 19 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0020Alarm 1.3.6.1.4.1.33.10020
Generated when alarm point 20 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0021Alarm 1.3.6.1.4.1.33.10021
Generated when alarm point 21 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0022Alarm 1.3.6.1.4.1.33.10022
Generated when alarm point 22 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0023Alarm 1.3.6.1.4.1.33.10023
Generated when alarm point 23 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0024Alarm 1.3.6.1.4.1.33.10024
Generated when alarm point 24 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0025Alarm 1.3.6.1.4.1.33.10025
Generated when alarm point 25 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0026Alarm 1.3.6.1.4.1.33.10026
Generated when alarm point 26 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0027Alarm 1.3.6.1.4.1.33.10027
Generated when alarm point 27 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0028Alarm 1.3.6.1.4.1.33.10028
Generated when alarm point 28 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0029Alarm 1.3.6.1.4.1.33.10029
Generated when alarm point 29 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0030Alarm 1.3.6.1.4.1.33.10030
Generated when alarm point 30 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0031Alarm 1.3.6.1.4.1.33.10031
Generated when alarm point 31 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0032Alarm 1.3.6.1.4.1.33.10032
Generated when alarm point 32 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0033Alarm 1.3.6.1.4.1.33.10033
Generated when alarm point 33 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0034Alarm 1.3.6.1.4.1.33.10034
Generated when alarm point 34 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0035Alarm 1.3.6.1.4.1.33.10035
Generated when alarm point 35 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0036Alarm 1.3.6.1.4.1.33.10036
Generated when alarm point 36 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0037Alarm 1.3.6.1.4.1.33.10037
Generated when alarm point 37 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0038Alarm 1.3.6.1.4.1.33.10038
Generated when alarm point 38 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0039Alarm 1.3.6.1.4.1.33.10039
Generated when alarm point 39 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0040Alarm 1.3.6.1.4.1.33.10040
Generated when alarm point 40 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0041Alarm 1.3.6.1.4.1.33.10041
Generated when alarm point 41 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0042Alarm 1.3.6.1.4.1.33.10042
Generated when alarm point 42 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0043Alarm 1.3.6.1.4.1.33.10043
Generated when alarm point 43 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0044Alarm 1.3.6.1.4.1.33.10044
Generated when alarm point 44 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0045Alarm 1.3.6.1.4.1.33.10045
Generated when alarm point 45 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0046Alarm 1.3.6.1.4.1.33.10046
Generated when alarm point 46 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0047Alarm 1.3.6.1.4.1.33.10047
Generated when alarm point 47 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0048Alarm 1.3.6.1.4.1.33.10048
Generated when alarm point 48 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0049Alarm 1.3.6.1.4.1.33.10049
Generated when alarm point 49 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0050Alarm 1.3.6.1.4.1.33.10050
Generated when alarm point 50 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0051Alarm 1.3.6.1.4.1.33.10051
Generated when alarm point 51 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0052Alarm 1.3.6.1.4.1.33.10052
Generated when alarm point 52 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0053Alarm 1.3.6.1.4.1.33.10053
Generated when alarm point 53 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0054Alarm 1.3.6.1.4.1.33.10054
Generated when alarm point 54 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0055Alarm 1.3.6.1.4.1.33.10055
Generated when alarm point 55 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0056Alarm 1.3.6.1.4.1.33.10056
Generated when alarm point 56 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0057Alarm 1.3.6.1.4.1.33.10057
Generated when alarm point 57 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0058Alarm 1.3.6.1.4.1.33.10058
Generated when alarm point 58 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0059Alarm 1.3.6.1.4.1.33.10059
Generated when alarm point 59 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0060Alarm 1.3.6.1.4.1.33.10060
Generated when alarm point 60 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0061Alarm 1.3.6.1.4.1.33.10061
Generated when alarm point 61 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0062Alarm 1.3.6.1.4.1.33.10062
Generated when alarm point 62 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0063Alarm 1.3.6.1.4.1.33.10063
Generated when alarm point 63 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0064Alarm 1.3.6.1.4.1.33.10064
Generated when alarm point 64 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0065Alarm 1.3.6.1.4.1.33.10065
Generated when alarm point 65 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0066Alarm 1.3.6.1.4.1.33.10066
Generated when alarm point 66 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0067Alarm 1.3.6.1.4.1.33.10067
Generated when alarm point 67 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0068Alarm 1.3.6.1.4.1.33.10068
Generated when alarm point 68 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0069Alarm 1.3.6.1.4.1.33.10069
Generated when alarm point 69 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0070Alarm 1.3.6.1.4.1.33.10070
Generated when alarm point 70 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0071Alarm 1.3.6.1.4.1.33.10071
Generated when alarm point 71 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0072Alarm 1.3.6.1.4.1.33.10072
Generated when alarm point 72 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0073Alarm 1.3.6.1.4.1.33.10073
Generated when alarm point 73 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0074Alarm 1.3.6.1.4.1.33.10074
Generated when alarm point 74 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0075Alarm 1.3.6.1.4.1.33.10075
Generated when alarm point 75 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0076Alarm 1.3.6.1.4.1.33.10076
Generated when alarm point 76 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0077Alarm 1.3.6.1.4.1.33.10077
Generated when alarm point 77 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0078Alarm 1.3.6.1.4.1.33.10078
Generated when alarm point 78 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0079Alarm 1.3.6.1.4.1.33.10079
Generated when alarm point 79 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0080Alarm 1.3.6.1.4.1.33.10080
Generated when alarm point 80 from a low density unit transitions to the alarm state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0001Normal 1.3.6.1.4.1.33.20001
Generated when alarm point 1 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0002Normal 1.3.6.1.4.1.33.20002
Generated when alarm point 2 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0003Normal 1.3.6.1.4.1.33.20003
Generated when alarm point 3 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0004Normal 1.3.6.1.4.1.33.20004
Generated when alarm point 4 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0005Normal 1.3.6.1.4.1.33.20005
Generated when alarm point 5 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0006Normal 1.3.6.1.4.1.33.20006
Generated when alarm point 6 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0007Normal 1.3.6.1.4.1.33.20007
Generated when alarm point 7 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0008Normal 1.3.6.1.4.1.33.20008
Generated when alarm point 8 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0009Normal 1.3.6.1.4.1.33.20009
Generated when alarm point 9 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0010Normal 1.3.6.1.4.1.33.20010
Generated when alarm point 10 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0011Normal 1.3.6.1.4.1.33.20011
Generated when alarm point 11 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0012Normal 1.3.6.1.4.1.33.20012
Generated when alarm point 12 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0013Normal 1.3.6.1.4.1.33.20013
Generated when alarm point 13 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0014Normal 1.3.6.1.4.1.33.20014
Generated when alarm point 14 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0015Normal 1.3.6.1.4.1.33.20015
Generated when alarm point 15 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0016Normal 1.3.6.1.4.1.33.20016
Generated when alarm point 16 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0017Normal 1.3.6.1.4.1.33.20017
Generated when alarm point 17 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0018Normal 1.3.6.1.4.1.33.20018
Generated when alarm point 18 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0019Normal 1.3.6.1.4.1.33.20019
Generated when alarm point 19 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0020Normal 1.3.6.1.4.1.33.20020
Generated when alarm point 20 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0021Normal 1.3.6.1.4.1.33.20021
Generated when alarm point 21 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0022Normal 1.3.6.1.4.1.33.20022
Generated when alarm point 22 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0023Normal 1.3.6.1.4.1.33.20023
Generated when alarm point 23 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0024Normal 1.3.6.1.4.1.33.20024
Generated when alarm point 24 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0025Normal 1.3.6.1.4.1.33.20025
Generated when alarm point 25 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0026Normal 1.3.6.1.4.1.33.20026
Generated when alarm point 26 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0027Normal 1.3.6.1.4.1.33.20027
Generated when alarm point 27 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0028Normal 1.3.6.1.4.1.33.20028
Generated when alarm point 28 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0029Normal 1.3.6.1.4.1.33.20029
Generated when alarm point 29 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0030Normal 1.3.6.1.4.1.33.20030
Generated when alarm point 30 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0031Normal 1.3.6.1.4.1.33.20031
Generated when alarm point 31 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0032Normal 1.3.6.1.4.1.33.20032
Generated when alarm point 32 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0033Normal 1.3.6.1.4.1.33.20033
Generated when alarm point 33 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0034Normal 1.3.6.1.4.1.33.20034
Generated when alarm point 34 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0035Normal 1.3.6.1.4.1.33.20035
Generated when alarm point 35 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0036Normal 1.3.6.1.4.1.33.20036
Generated when alarm point 36 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0037Normal 1.3.6.1.4.1.33.20037
Generated when alarm point 37 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0038Normal 1.3.6.1.4.1.33.20038
Generated when alarm point 38 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0039Normal 1.3.6.1.4.1.33.20039
Generated when alarm point 39 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0040Normal 1.3.6.1.4.1.33.20040
Generated when alarm point 40 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0041Normal 1.3.6.1.4.1.33.20041
Generated when alarm point 41 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0042Normal 1.3.6.1.4.1.33.20042
Generated when alarm point 42 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0043Normal 1.3.6.1.4.1.33.20043
Generated when alarm point 43 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0044Normal 1.3.6.1.4.1.33.20044
Generated when alarm point 44 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0045Normal 1.3.6.1.4.1.33.20045
Generated when alarm point 45 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0046Normal 1.3.6.1.4.1.33.20046
Generated when alarm point 46 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0047Normal 1.3.6.1.4.1.33.20047
Generated when alarm point 47 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0048Normal 1.3.6.1.4.1.33.20048
Generated when alarm point 48 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0049Normal 1.3.6.1.4.1.33.20049
Generated when alarm point 49 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0050Normal 1.3.6.1.4.1.33.20050
Generated when alarm point 50 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0051Normal 1.3.6.1.4.1.33.20051
Generated when alarm point 51 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0052Normal 1.3.6.1.4.1.33.20052
Generated when alarm point 52 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0053Normal 1.3.6.1.4.1.33.20053
Generated when alarm point 53 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0054Normal 1.3.6.1.4.1.33.20054
Generated when alarm point 54 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0055Normal 1.3.6.1.4.1.33.20055
Generated when alarm point 55 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0056Normal 1.3.6.1.4.1.33.20056
Generated when alarm point 56 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0057Normal 1.3.6.1.4.1.33.20057
Generated when alarm point 57 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0058Normal 1.3.6.1.4.1.33.20058
Generated when alarm point 58 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0059Normal 1.3.6.1.4.1.33.20059
Generated when alarm point 59 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0060Normal 1.3.6.1.4.1.33.20060
Generated when alarm point 60 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0061Normal 1.3.6.1.4.1.33.20061
Generated when alarm point 61 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0062Normal 1.3.6.1.4.1.33.20062
Generated when alarm point 62 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0063Normal 1.3.6.1.4.1.33.20063
Generated when alarm point 63 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0064Normal 1.3.6.1.4.1.33.20064
Generated when alarm point 64 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0065Normal 1.3.6.1.4.1.33.20065
Generated when alarm point 65 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0066Normal 1.3.6.1.4.1.33.20066
Generated when alarm point 66 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0067Normal 1.3.6.1.4.1.33.20067
Generated when alarm point 67 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0068Normal 1.3.6.1.4.1.33.20068
Generated when alarm point 68 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0069Normal 1.3.6.1.4.1.33.20069
Generated when alarm point 69 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0070Normal 1.3.6.1.4.1.33.20070
Generated when alarm point 70 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0071Normal 1.3.6.1.4.1.33.20071
Generated when alarm point 71 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0072Normal 1.3.6.1.4.1.33.20072
Generated when alarm point 72 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0073Normal 1.3.6.1.4.1.33.20073
Generated when alarm point 73 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0074Normal 1.3.6.1.4.1.33.20074
Generated when alarm point 74 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0075Normal 1.3.6.1.4.1.33.20075
Generated when alarm point 75 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0076Normal 1.3.6.1.4.1.33.20076
Generated when alarm point 76 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0077Normal 1.3.6.1.4.1.33.20077
Generated when alarm point 77 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0078Normal 1.3.6.1.4.1.33.20078
Generated when alarm point 78 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0079Normal 1.3.6.1.4.1.33.20079
Generated when alarm point 79 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputLowDensity0080Normal 1.3.6.1.4.1.33.20080
Generated when alarm point 80 from a low density unit transitions to the normal state.
TRAP-TYPE    
  basicContactClosureOrAlarmInputValue  
  basicContactClosureOrAlarmInputName  
  sysLocation  
  basicContactClosureOrAlarmInputIndex  
  basicContactClosureOrAlarmInputStatus  
  basicContactClosureOrAlarmInputZone  
  basicContactClosureOrAlarmInputRelatedEquipment  
  basicContactClosureOrAlarmInputSiteId  
  basicContactClosureOrAlarmInputManufacturer  
  basicContactClosureOrAlarmInputModel  

alarmInputHighDensity0001Alarm 1.3.6.1.4.1.33.30001
Generated when alarm point 1 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0002Alarm 1.3.6.1.4.1.33.30002
Generated when alarm point 2 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0003Alarm 1.3.6.1.4.1.33.30003
Generated when alarm point 3 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0004Alarm 1.3.6.1.4.1.33.30004
Generated when alarm point 4 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0005Alarm 1.3.6.1.4.1.33.30005
Generated when alarm point 5 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0006Alarm 1.3.6.1.4.1.33.30006
Generated when alarm point 6 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0007Alarm 1.3.6.1.4.1.33.30007
Generated when alarm point 7 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0008Alarm 1.3.6.1.4.1.33.30008
Generated when alarm point 8 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0009Alarm 1.3.6.1.4.1.33.30009
Generated when alarm point 9 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0010Alarm 1.3.6.1.4.1.33.30010
Generated when alarm point 10 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0011Alarm 1.3.6.1.4.1.33.30011
Generated when alarm point 11 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0012Alarm 1.3.6.1.4.1.33.30012
Generated when alarm point 12 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0013Alarm 1.3.6.1.4.1.33.30013
Generated when alarm point 13 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0014Alarm 1.3.6.1.4.1.33.30014
Generated when alarm point 14 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0015Alarm 1.3.6.1.4.1.33.30015
Generated when alarm point 15 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0016Alarm 1.3.6.1.4.1.33.30016
Generated when alarm point 16 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0017Alarm 1.3.6.1.4.1.33.30017
Generated when alarm point 17 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0018Alarm 1.3.6.1.4.1.33.30018
Generated when alarm point 18 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0019Alarm 1.3.6.1.4.1.33.30019
Generated when alarm point 19 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0020Alarm 1.3.6.1.4.1.33.30020
Generated when alarm point 20 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0021Alarm 1.3.6.1.4.1.33.30021
Generated when alarm point 21 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0022Alarm 1.3.6.1.4.1.33.30022
Generated when alarm point 22 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0023Alarm 1.3.6.1.4.1.33.30023
Generated when alarm point 23 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0024Alarm 1.3.6.1.4.1.33.30024
Generated when alarm point 24 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0025Alarm 1.3.6.1.4.1.33.30025
Generated when alarm point 25 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0026Alarm 1.3.6.1.4.1.33.30026
Generated when alarm point 26 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0027Alarm 1.3.6.1.4.1.33.30027
Generated when alarm point 27 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0028Alarm 1.3.6.1.4.1.33.30028
Generated when alarm point 28 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0029Alarm 1.3.6.1.4.1.33.30029
Generated when alarm point 29 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0030Alarm 1.3.6.1.4.1.33.30030
Generated when alarm point 30 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0031Alarm 1.3.6.1.4.1.33.30031
Generated when alarm point 31 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0032Alarm 1.3.6.1.4.1.33.30032
Generated when alarm point 32 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0033Alarm 1.3.6.1.4.1.33.30033
Generated when alarm point 33 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0034Alarm 1.3.6.1.4.1.33.30034
Generated when alarm point 34 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0035Alarm 1.3.6.1.4.1.33.30035
Generated when alarm point 35 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0036Alarm 1.3.6.1.4.1.33.30036
Generated when alarm point 36 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0037Alarm 1.3.6.1.4.1.33.30037
Generated when alarm point 37 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0038Alarm 1.3.6.1.4.1.33.30038
Generated when alarm point 38 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0039Alarm 1.3.6.1.4.1.33.30039
Generated when alarm point 39 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0040Alarm 1.3.6.1.4.1.33.30040
Generated when alarm point 40 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0041Alarm 1.3.6.1.4.1.33.30041
Generated when alarm point 41 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0042Alarm 1.3.6.1.4.1.33.30042
Generated when alarm point 42 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0043Alarm 1.3.6.1.4.1.33.30043
Generated when alarm point 43 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0044Alarm 1.3.6.1.4.1.33.30044
Generated when alarm point 44 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0045Alarm 1.3.6.1.4.1.33.30045
Generated when alarm point 45 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0046Alarm 1.3.6.1.4.1.33.30046
Generated when alarm point 46 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0047Alarm 1.3.6.1.4.1.33.30047
Generated when alarm point 47 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0048Alarm 1.3.6.1.4.1.33.30048
Generated when alarm point 48 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0049Alarm 1.3.6.1.4.1.33.30049
Generated when alarm point 49 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0050Alarm 1.3.6.1.4.1.33.30050
Generated when alarm point 50 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0051Alarm 1.3.6.1.4.1.33.30051
Generated when alarm point 51 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0052Alarm 1.3.6.1.4.1.33.30052
Generated when alarm point 52 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0053Alarm 1.3.6.1.4.1.33.30053
Generated when alarm point 53 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0054Alarm 1.3.6.1.4.1.33.30054
Generated when alarm point 54 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0055Alarm 1.3.6.1.4.1.33.30055
Generated when alarm point 55 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0056Alarm 1.3.6.1.4.1.33.30056
Generated when alarm point 56 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0057Alarm 1.3.6.1.4.1.33.30057
Generated when alarm point 57 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0058Alarm 1.3.6.1.4.1.33.30058
Generated when alarm point 58 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0059Alarm 1.3.6.1.4.1.33.30059
Generated when alarm point 59 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0060Alarm 1.3.6.1.4.1.33.30060
Generated when alarm point 60 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0061Alarm 1.3.6.1.4.1.33.30061
Generated when alarm point 61 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0062Alarm 1.3.6.1.4.1.33.30062
Generated when alarm point 62 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0063Alarm 1.3.6.1.4.1.33.30063
Generated when alarm point 63 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0064Alarm 1.3.6.1.4.1.33.30064
Generated when alarm point 64 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0065Alarm 1.3.6.1.4.1.33.30065
Generated when alarm point 65 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0066Alarm 1.3.6.1.4.1.33.30066
Generated when alarm point 66 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0067Alarm 1.3.6.1.4.1.33.30067
Generated when alarm point 67 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0068Alarm 1.3.6.1.4.1.33.30068
Generated when alarm point 68 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0069Alarm 1.3.6.1.4.1.33.30069
Generated when alarm point 69 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0070Alarm 1.3.6.1.4.1.33.30070
Generated when alarm point 70 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0071Alarm 1.3.6.1.4.1.33.30071
Generated when alarm point 71 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0072Alarm 1.3.6.1.4.1.33.30072
Generated when alarm point 72 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0073Alarm 1.3.6.1.4.1.33.30073
Generated when alarm point 73 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0074Alarm 1.3.6.1.4.1.33.30074
Generated when alarm point 74 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0075Alarm 1.3.6.1.4.1.33.30075
Generated when alarm point 75 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0076Alarm 1.3.6.1.4.1.33.30076
Generated when alarm point 76 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0077Alarm 1.3.6.1.4.1.33.30077
Generated when alarm point 77 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0078Alarm 1.3.6.1.4.1.33.30078
Generated when alarm point 78 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0079Alarm 1.3.6.1.4.1.33.30079
Generated when alarm point 79 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0080Alarm 1.3.6.1.4.1.33.30080
Generated when alarm point 80 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0081Alarm 1.3.6.1.4.1.33.30081
Generated when alarm point 81 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0082Alarm 1.3.6.1.4.1.33.30082
Generated when alarm point 82 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0083Alarm 1.3.6.1.4.1.33.30083
Generated when alarm point 83 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0084Alarm 1.3.6.1.4.1.33.30084
Generated when alarm point 84 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0085Alarm 1.3.6.1.4.1.33.30085
Generated when alarm point 85 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0086Alarm 1.3.6.1.4.1.33.30086
Generated when alarm point 86 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0087Alarm 1.3.6.1.4.1.33.30087
Generated when alarm point 87 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0088Alarm 1.3.6.1.4.1.33.30088
Generated when alarm point 88 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0089Alarm 1.3.6.1.4.1.33.30089
Generated when alarm point 89 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0090Alarm 1.3.6.1.4.1.33.30090
Generated when alarm point 90 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0091Alarm 1.3.6.1.4.1.33.30091
Generated when alarm point 91 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0092Alarm 1.3.6.1.4.1.33.30092
Generated when alarm point 92 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0093Alarm 1.3.6.1.4.1.33.30093
Generated when alarm point 93 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0094Alarm 1.3.6.1.4.1.33.30094
Generated when alarm point 94 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0095Alarm 1.3.6.1.4.1.33.30095
Generated when alarm point 95 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0096Alarm 1.3.6.1.4.1.33.30096
Generated when alarm point 96 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0097Alarm 1.3.6.1.4.1.33.30097
Generated when alarm point 97 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0098Alarm 1.3.6.1.4.1.33.30098
Generated when alarm point 98 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0099Alarm 1.3.6.1.4.1.33.30099
Generated when alarm point 99 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0100Alarm 1.3.6.1.4.1.33.30100
Generated when alarm point 100 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0101Alarm 1.3.6.1.4.1.33.30101
Generated when alarm point 101 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0102Alarm 1.3.6.1.4.1.33.30102
Generated when alarm point 102 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0103Alarm 1.3.6.1.4.1.33.30103
Generated when alarm point 103 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0104Alarm 1.3.6.1.4.1.33.30104
Generated when alarm point 104 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0105Alarm 1.3.6.1.4.1.33.30105
Generated when alarm point 105 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0106Alarm 1.3.6.1.4.1.33.30106
Generated when alarm point 106 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0107Alarm 1.3.6.1.4.1.33.30107
Generated when alarm point 107 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0108Alarm 1.3.6.1.4.1.33.30108
Generated when alarm point 108 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0109Alarm 1.3.6.1.4.1.33.30109
Generated when alarm point 109 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0110Alarm 1.3.6.1.4.1.33.30110
Generated when alarm point 110 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0111Alarm 1.3.6.1.4.1.33.30111
Generated when alarm point 111 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0112Alarm 1.3.6.1.4.1.33.30112
Generated when alarm point 112 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0113Alarm 1.3.6.1.4.1.33.30113
Generated when alarm point 113 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0114Alarm 1.3.6.1.4.1.33.30114
Generated when alarm point 114 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0115Alarm 1.3.6.1.4.1.33.30115
Generated when alarm point 115 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0116Alarm 1.3.6.1.4.1.33.30116
Generated when alarm point 116 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0117Alarm 1.3.6.1.4.1.33.30117
Generated when alarm point 117 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0118Alarm 1.3.6.1.4.1.33.30118
Generated when alarm point 118 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0119Alarm 1.3.6.1.4.1.33.30119
Generated when alarm point 119 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0120Alarm 1.3.6.1.4.1.33.30120
Generated when alarm point 120 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0121Alarm 1.3.6.1.4.1.33.30121
Generated when alarm point 121 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0122Alarm 1.3.6.1.4.1.33.30122
Generated when alarm point 122 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0123Alarm 1.3.6.1.4.1.33.30123
Generated when alarm point 123 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0124Alarm 1.3.6.1.4.1.33.30124
Generated when alarm point 124 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0125Alarm 1.3.6.1.4.1.33.30125
Generated when alarm point 125 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0126Alarm 1.3.6.1.4.1.33.30126
Generated when alarm point 126 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0127Alarm 1.3.6.1.4.1.33.30127
Generated when alarm point 127 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0128Alarm 1.3.6.1.4.1.33.30128
Generated when alarm point 128 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0129Alarm 1.3.6.1.4.1.33.30129
Generated when alarm point 129 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0130Alarm 1.3.6.1.4.1.33.30130
Generated when alarm point 130 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0131Alarm 1.3.6.1.4.1.33.30131
Generated when alarm point 131 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0132Alarm 1.3.6.1.4.1.33.30132
Generated when alarm point 132 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0133Alarm 1.3.6.1.4.1.33.30133
Generated when alarm point 133 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0134Alarm 1.3.6.1.4.1.33.30134
Generated when alarm point 134 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0135Alarm 1.3.6.1.4.1.33.30135
Generated when alarm point 135 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0136Alarm 1.3.6.1.4.1.33.30136
Generated when alarm point 136 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0137Alarm 1.3.6.1.4.1.33.30137
Generated when alarm point 137 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0138Alarm 1.3.6.1.4.1.33.30138
Generated when alarm point 138 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0139Alarm 1.3.6.1.4.1.33.30139
Generated when alarm point 139 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0140Alarm 1.3.6.1.4.1.33.30140
Generated when alarm point 140 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0141Alarm 1.3.6.1.4.1.33.30141
Generated when alarm point 141 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0142Alarm 1.3.6.1.4.1.33.30142
Generated when alarm point 142 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0143Alarm 1.3.6.1.4.1.33.30143
Generated when alarm point 143 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0144Alarm 1.3.6.1.4.1.33.30144
Generated when alarm point 144 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0145Alarm 1.3.6.1.4.1.33.30145
Generated when alarm point 145 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0146Alarm 1.3.6.1.4.1.33.30146
Generated when alarm point 146 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0147Alarm 1.3.6.1.4.1.33.30147
Generated when alarm point 147 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0148Alarm 1.3.6.1.4.1.33.30148
Generated when alarm point 148 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0149Alarm 1.3.6.1.4.1.33.30149
Generated when alarm point 149 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0150Alarm 1.3.6.1.4.1.33.30150
Generated when alarm point 150 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0151Alarm 1.3.6.1.4.1.33.30151
Generated when alarm point 151 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0152Alarm 1.3.6.1.4.1.33.30152
Generated when alarm point 152 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0153Alarm 1.3.6.1.4.1.33.30153
Generated when alarm point 153 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0154Alarm 1.3.6.1.4.1.33.30154
Generated when alarm point 154 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0155Alarm 1.3.6.1.4.1.33.30155
Generated when alarm point 155 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0156Alarm 1.3.6.1.4.1.33.30156
Generated when alarm point 156 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0157Alarm 1.3.6.1.4.1.33.30157
Generated when alarm point 157 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0158Alarm 1.3.6.1.4.1.33.30158
Generated when alarm point 158 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0159Alarm 1.3.6.1.4.1.33.30159
Generated when alarm point 159 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0160Alarm 1.3.6.1.4.1.33.30160
Generated when alarm point 160 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0161Alarm 1.3.6.1.4.1.33.30161
Generated when alarm point 161 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0162Alarm 1.3.6.1.4.1.33.30162
Generated when alarm point 162 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0163Alarm 1.3.6.1.4.1.33.30163
Generated when alarm point 163 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0164Alarm 1.3.6.1.4.1.33.30164
Generated when alarm point 164 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0165Alarm 1.3.6.1.4.1.33.30165
Generated when alarm point 165 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0166Alarm 1.3.6.1.4.1.33.30166
Generated when alarm point 166 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0167Alarm 1.3.6.1.4.1.33.30167
Generated when alarm point 167 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0168Alarm 1.3.6.1.4.1.33.30168
Generated when alarm point 168 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0169Alarm 1.3.6.1.4.1.33.30169
Generated when alarm point 169 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0170Alarm 1.3.6.1.4.1.33.30170
Generated when alarm point 170 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0171Alarm 1.3.6.1.4.1.33.30171
Generated when alarm point 171 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0172Alarm 1.3.6.1.4.1.33.30172
Generated when alarm point 172 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0173Alarm 1.3.6.1.4.1.33.30173
Generated when alarm point 173 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0174Alarm 1.3.6.1.4.1.33.30174
Generated when alarm point 174 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0175Alarm 1.3.6.1.4.1.33.30175
Generated when alarm point 175 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0176Alarm 1.3.6.1.4.1.33.30176
Generated when alarm point 176 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0177Alarm 1.3.6.1.4.1.33.30177
Generated when alarm point 177 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0178Alarm 1.3.6.1.4.1.33.30178
Generated when alarm point 178 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0179Alarm 1.3.6.1.4.1.33.30179
Generated when alarm point 179 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0180Alarm 1.3.6.1.4.1.33.30180
Generated when alarm point 180 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0181Alarm 1.3.6.1.4.1.33.30181
Generated when alarm point 181 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0182Alarm 1.3.6.1.4.1.33.30182
Generated when alarm point 182 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0183Alarm 1.3.6.1.4.1.33.30183
Generated when alarm point 183 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0184Alarm 1.3.6.1.4.1.33.30184
Generated when alarm point 184 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0185Alarm 1.3.6.1.4.1.33.30185
Generated when alarm point 185 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0186Alarm 1.3.6.1.4.1.33.30186
Generated when alarm point 186 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0187Alarm 1.3.6.1.4.1.33.30187
Generated when alarm point 187 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0188Alarm 1.3.6.1.4.1.33.30188
Generated when alarm point 188 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0189Alarm 1.3.6.1.4.1.33.30189
Generated when alarm point 189 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0190Alarm 1.3.6.1.4.1.33.30190
Generated when alarm point 190 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0191Alarm 1.3.6.1.4.1.33.30191
Generated when alarm point 191 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0192Alarm 1.3.6.1.4.1.33.30192
Generated when alarm point 192 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0193Alarm 1.3.6.1.4.1.33.30193
Generated when alarm point 193 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0194Alarm 1.3.6.1.4.1.33.30194
Generated when alarm point 194 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0195Alarm 1.3.6.1.4.1.33.30195
Generated when alarm point 195 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0196Alarm 1.3.6.1.4.1.33.30196
Generated when alarm point 196 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0197Alarm 1.3.6.1.4.1.33.30197
Generated when alarm point 197 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0198Alarm 1.3.6.1.4.1.33.30198
Generated when alarm point 198 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0199Alarm 1.3.6.1.4.1.33.30199
Generated when alarm point 199 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0200Alarm 1.3.6.1.4.1.33.30200
Generated when alarm point 200 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0201Alarm 1.3.6.1.4.1.33.30201
Generated when alarm point 201 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0202Alarm 1.3.6.1.4.1.33.30202
Generated when alarm point 202 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0203Alarm 1.3.6.1.4.1.33.30203
Generated when alarm point 203 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0204Alarm 1.3.6.1.4.1.33.30204
Generated when alarm point 204 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0205Alarm 1.3.6.1.4.1.33.30205
Generated when alarm point 205 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0206Alarm 1.3.6.1.4.1.33.30206
Generated when alarm point 206 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0207Alarm 1.3.6.1.4.1.33.30207
Generated when alarm point 207 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0208Alarm 1.3.6.1.4.1.33.30208
Generated when alarm point 208 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0209Alarm 1.3.6.1.4.1.33.30209
Generated when alarm point 209 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0210Alarm 1.3.6.1.4.1.33.30210
Generated when alarm point 210 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0211Alarm 1.3.6.1.4.1.33.30211
Generated when alarm point 211 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0212Alarm 1.3.6.1.4.1.33.30212
Generated when alarm point 212 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0213Alarm 1.3.6.1.4.1.33.30213
Generated when alarm point 213 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0214Alarm 1.3.6.1.4.1.33.30214
Generated when alarm point 214 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0215Alarm 1.3.6.1.4.1.33.30215
Generated when alarm point 215 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0216Alarm 1.3.6.1.4.1.33.30216
Generated when alarm point 216 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0217Alarm 1.3.6.1.4.1.33.30217
Generated when alarm point 217 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0218Alarm 1.3.6.1.4.1.33.30218
Generated when alarm point 218 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0219Alarm 1.3.6.1.4.1.33.30219
Generated when alarm point 219 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0220Alarm 1.3.6.1.4.1.33.30220
Generated when alarm point 220 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0221Alarm 1.3.6.1.4.1.33.30221
Generated when alarm point 221 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0222Alarm 1.3.6.1.4.1.33.30222
Generated when alarm point 222 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0223Alarm 1.3.6.1.4.1.33.30223
Generated when alarm point 223 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0224Alarm 1.3.6.1.4.1.33.30224
Generated when alarm point 224 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0225Alarm 1.3.6.1.4.1.33.30225
Generated when alarm point 225 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0226Alarm 1.3.6.1.4.1.33.30226
Generated when alarm point 226 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0227Alarm 1.3.6.1.4.1.33.30227
Generated when alarm point 227 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0228Alarm 1.3.6.1.4.1.33.30228
Generated when alarm point 228 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0229Alarm 1.3.6.1.4.1.33.30229
Generated when alarm point 229 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0230Alarm 1.3.6.1.4.1.33.30230
Generated when alarm point 230 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0231Alarm 1.3.6.1.4.1.33.30231
Generated when alarm point 231 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0232Alarm 1.3.6.1.4.1.33.30232
Generated when alarm point 232 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0233Alarm 1.3.6.1.4.1.33.30233
Generated when alarm point 233 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0234Alarm 1.3.6.1.4.1.33.30234
Generated when alarm point 234 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0235Alarm 1.3.6.1.4.1.33.30235
Generated when alarm point 235 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0236Alarm 1.3.6.1.4.1.33.30236
Generated when alarm point 236 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0237Alarm 1.3.6.1.4.1.33.30237
Generated when alarm point 237 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0238Alarm 1.3.6.1.4.1.33.30238
Generated when alarm point 238 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0239Alarm 1.3.6.1.4.1.33.30239
Generated when alarm point 239 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0240Alarm 1.3.6.1.4.1.33.30240
Generated when alarm point 240 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0241Alarm 1.3.6.1.4.1.33.30241
Generated when alarm point 241 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0242Alarm 1.3.6.1.4.1.33.30242
Generated when alarm point 242 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0243Alarm 1.3.6.1.4.1.33.30243
Generated when alarm point 243 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0244Alarm 1.3.6.1.4.1.33.30244
Generated when alarm point 244 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0245Alarm 1.3.6.1.4.1.33.30245
Generated when alarm point 245 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0246Alarm 1.3.6.1.4.1.33.30246
Generated when alarm point 246 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0247Alarm 1.3.6.1.4.1.33.30247
Generated when alarm point 247 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0248Alarm 1.3.6.1.4.1.33.30248
Generated when alarm point 248 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0249Alarm 1.3.6.1.4.1.33.30249
Generated when alarm point 249 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0250Alarm 1.3.6.1.4.1.33.30250
Generated when alarm point 250 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0251Alarm 1.3.6.1.4.1.33.30251
Generated when alarm point 251 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0252Alarm 1.3.6.1.4.1.33.30252
Generated when alarm point 252 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0253Alarm 1.3.6.1.4.1.33.30253
Generated when alarm point 253 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0254Alarm 1.3.6.1.4.1.33.30254
Generated when alarm point 254 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0255Alarm 1.3.6.1.4.1.33.30255
Generated when alarm point 255 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0256Alarm 1.3.6.1.4.1.33.30256
Generated when alarm point 256 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0257Alarm 1.3.6.1.4.1.33.30257
Generated when alarm point 257 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0258Alarm 1.3.6.1.4.1.33.30258
Generated when alarm point 258 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0259Alarm 1.3.6.1.4.1.33.30259
Generated when alarm point 259 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0260Alarm 1.3.6.1.4.1.33.30260
Generated when alarm point 260 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0261Alarm 1.3.6.1.4.1.33.30261
Generated when alarm point 261 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0262Alarm 1.3.6.1.4.1.33.30262
Generated when alarm point 262 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0263Alarm 1.3.6.1.4.1.33.30263
Generated when alarm point 263 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0264Alarm 1.3.6.1.4.1.33.30264
Generated when alarm point 264 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0265Alarm 1.3.6.1.4.1.33.30265
Generated when alarm point 265 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0266Alarm 1.3.6.1.4.1.33.30266
Generated when alarm point 266 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0267Alarm 1.3.6.1.4.1.33.30267
Generated when alarm point 267 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0268Alarm 1.3.6.1.4.1.33.30268
Generated when alarm point 268 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0269Alarm 1.3.6.1.4.1.33.30269
Generated when alarm point 269 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0270Alarm 1.3.6.1.4.1.33.30270
Generated when alarm point 270 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0271Alarm 1.3.6.1.4.1.33.30271
Generated when alarm point 271 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0272Alarm 1.3.6.1.4.1.33.30272
Generated when alarm point 272 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0273Alarm 1.3.6.1.4.1.33.30273
Generated when alarm point 273 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0274Alarm 1.3.6.1.4.1.33.30274
Generated when alarm point 274 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0275Alarm 1.3.6.1.4.1.33.30275
Generated when alarm point 275 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0276Alarm 1.3.6.1.4.1.33.30276
Generated when alarm point 276 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0277Alarm 1.3.6.1.4.1.33.30277
Generated when alarm point 277 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0278Alarm 1.3.6.1.4.1.33.30278
Generated when alarm point 278 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0279Alarm 1.3.6.1.4.1.33.30279
Generated when alarm point 279 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0280Alarm 1.3.6.1.4.1.33.30280
Generated when alarm point 280 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0281Alarm 1.3.6.1.4.1.33.30281
Generated when alarm point 281 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0282Alarm 1.3.6.1.4.1.33.30282
Generated when alarm point 282 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0283Alarm 1.3.6.1.4.1.33.30283
Generated when alarm point 283 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0284Alarm 1.3.6.1.4.1.33.30284
Generated when alarm point 284 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0285Alarm 1.3.6.1.4.1.33.30285
Generated when alarm point 285 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0286Alarm 1.3.6.1.4.1.33.30286
Generated when alarm point 286 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0287Alarm 1.3.6.1.4.1.33.30287
Generated when alarm point 287 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0288Alarm 1.3.6.1.4.1.33.30288
Generated when alarm point 288 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0289Alarm 1.3.6.1.4.1.33.30289
Generated when alarm point 289 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0290Alarm 1.3.6.1.4.1.33.30290
Generated when alarm point 290 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0291Alarm 1.3.6.1.4.1.33.30291
Generated when alarm point 291 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0292Alarm 1.3.6.1.4.1.33.30292
Generated when alarm point 292 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0293Alarm 1.3.6.1.4.1.33.30293
Generated when alarm point 293 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0294Alarm 1.3.6.1.4.1.33.30294
Generated when alarm point 294 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0295Alarm 1.3.6.1.4.1.33.30295
Generated when alarm point 295 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0296Alarm 1.3.6.1.4.1.33.30296
Generated when alarm point 296 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0297Alarm 1.3.6.1.4.1.33.30297
Generated when alarm point 297 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0298Alarm 1.3.6.1.4.1.33.30298
Generated when alarm point 298 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0299Alarm 1.3.6.1.4.1.33.30299
Generated when alarm point 299 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0300Alarm 1.3.6.1.4.1.33.30300
Generated when alarm point 300 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0301Alarm 1.3.6.1.4.1.33.30301
Generated when alarm point 301 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0302Alarm 1.3.6.1.4.1.33.30302
Generated when alarm point 302 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0303Alarm 1.3.6.1.4.1.33.30303
Generated when alarm point 303 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0304Alarm 1.3.6.1.4.1.33.30304
Generated when alarm point 304 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0305Alarm 1.3.6.1.4.1.33.30305
Generated when alarm point 305 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0306Alarm 1.3.6.1.4.1.33.30306
Generated when alarm point 306 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0307Alarm 1.3.6.1.4.1.33.30307
Generated when alarm point 307 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0308Alarm 1.3.6.1.4.1.33.30308
Generated when alarm point 308 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0309Alarm 1.3.6.1.4.1.33.30309
Generated when alarm point 309 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0310Alarm 1.3.6.1.4.1.33.30310
Generated when alarm point 310 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0311Alarm 1.3.6.1.4.1.33.30311
Generated when alarm point 311 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0312Alarm 1.3.6.1.4.1.33.30312
Generated when alarm point 312 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0313Alarm 1.3.6.1.4.1.33.30313
Generated when alarm point 313 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0314Alarm 1.3.6.1.4.1.33.30314
Generated when alarm point 314 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0315Alarm 1.3.6.1.4.1.33.30315
Generated when alarm point 315 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0316Alarm 1.3.6.1.4.1.33.30316
Generated when alarm point 316 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0317Alarm 1.3.6.1.4.1.33.30317
Generated when alarm point 317 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0318Alarm 1.3.6.1.4.1.33.30318
Generated when alarm point 318 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0319Alarm 1.3.6.1.4.1.33.30319
Generated when alarm point 319 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0320Alarm 1.3.6.1.4.1.33.30320
Generated when alarm point 320 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0321Alarm 1.3.6.1.4.1.33.30321
Generated when alarm point 321 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0322Alarm 1.3.6.1.4.1.33.30322
Generated when alarm point 322 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0323Alarm 1.3.6.1.4.1.33.30323
Generated when alarm point 323 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0324Alarm 1.3.6.1.4.1.33.30324
Generated when alarm point 324 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0325Alarm 1.3.6.1.4.1.33.30325
Generated when alarm point 325 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0326Alarm 1.3.6.1.4.1.33.30326
Generated when alarm point 326 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0327Alarm 1.3.6.1.4.1.33.30327
Generated when alarm point 327 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0328Alarm 1.3.6.1.4.1.33.30328
Generated when alarm point 328 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0329Alarm 1.3.6.1.4.1.33.30329
Generated when alarm point 329 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0330Alarm 1.3.6.1.4.1.33.30330
Generated when alarm point 330 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0331Alarm 1.3.6.1.4.1.33.30331
Generated when alarm point 331 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0332Alarm 1.3.6.1.4.1.33.30332
Generated when alarm point 332 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0333Alarm 1.3.6.1.4.1.33.30333
Generated when alarm point 333 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0334Alarm 1.3.6.1.4.1.33.30334
Generated when alarm point 334 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0335Alarm 1.3.6.1.4.1.33.30335
Generated when alarm point 335 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0336Alarm 1.3.6.1.4.1.33.30336
Generated when alarm point 336 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0337Alarm 1.3.6.1.4.1.33.30337
Generated when alarm point 337 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0338Alarm 1.3.6.1.4.1.33.30338
Generated when alarm point 338 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0339Alarm 1.3.6.1.4.1.33.30339
Generated when alarm point 339 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0340Alarm 1.3.6.1.4.1.33.30340
Generated when alarm point 340 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0341Alarm 1.3.6.1.4.1.33.30341
Generated when alarm point 341 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0342Alarm 1.3.6.1.4.1.33.30342
Generated when alarm point 342 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0343Alarm 1.3.6.1.4.1.33.30343
Generated when alarm point 343 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0344Alarm 1.3.6.1.4.1.33.30344
Generated when alarm point 344 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0345Alarm 1.3.6.1.4.1.33.30345
Generated when alarm point 345 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0346Alarm 1.3.6.1.4.1.33.30346
Generated when alarm point 346 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0347Alarm 1.3.6.1.4.1.33.30347
Generated when alarm point 347 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0348Alarm 1.3.6.1.4.1.33.30348
Generated when alarm point 348 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0349Alarm 1.3.6.1.4.1.33.30349
Generated when alarm point 349 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0350Alarm 1.3.6.1.4.1.33.30350
Generated when alarm point 350 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0351Alarm 1.3.6.1.4.1.33.30351
Generated when alarm point 351 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0352Alarm 1.3.6.1.4.1.33.30352
Generated when alarm point 352 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0353Alarm 1.3.6.1.4.1.33.30353
Generated when alarm point 353 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0354Alarm 1.3.6.1.4.1.33.30354
Generated when alarm point 354 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0355Alarm 1.3.6.1.4.1.33.30355
Generated when alarm point 355 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0356Alarm 1.3.6.1.4.1.33.30356
Generated when alarm point 356 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0357Alarm 1.3.6.1.4.1.33.30357
Generated when alarm point 357 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0358Alarm 1.3.6.1.4.1.33.30358
Generated when alarm point 358 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0359Alarm 1.3.6.1.4.1.33.30359
Generated when alarm point 359 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0360Alarm 1.3.6.1.4.1.33.30360
Generated when alarm point 360 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0361Alarm 1.3.6.1.4.1.33.30361
Generated when alarm point 361 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0362Alarm 1.3.6.1.4.1.33.30362
Generated when alarm point 362 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0363Alarm 1.3.6.1.4.1.33.30363
Generated when alarm point 363 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0364Alarm 1.3.6.1.4.1.33.30364
Generated when alarm point 364 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0365Alarm 1.3.6.1.4.1.33.30365
Generated when alarm point 365 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0366Alarm 1.3.6.1.4.1.33.30366
Generated when alarm point 366 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0367Alarm 1.3.6.1.4.1.33.30367
Generated when alarm point 367 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0368Alarm 1.3.6.1.4.1.33.30368
Generated when alarm point 368 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0369Alarm 1.3.6.1.4.1.33.30369
Generated when alarm point 369 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0370Alarm 1.3.6.1.4.1.33.30370
Generated when alarm point 370 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0371Alarm 1.3.6.1.4.1.33.30371
Generated when alarm point 371 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0372Alarm 1.3.6.1.4.1.33.30372
Generated when alarm point 372 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0373Alarm 1.3.6.1.4.1.33.30373
Generated when alarm point 373 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0374Alarm 1.3.6.1.4.1.33.30374
Generated when alarm point 374 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0375Alarm 1.3.6.1.4.1.33.30375
Generated when alarm point 375 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0376Alarm 1.3.6.1.4.1.33.30376
Generated when alarm point 376 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0377Alarm 1.3.6.1.4.1.33.30377
Generated when alarm point 377 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0378Alarm 1.3.6.1.4.1.33.30378
Generated when alarm point 378 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0379Alarm 1.3.6.1.4.1.33.30379
Generated when alarm point 379 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0380Alarm 1.3.6.1.4.1.33.30380
Generated when alarm point 380 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0381Alarm 1.3.6.1.4.1.33.30381
Generated when alarm point 381 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0382Alarm 1.3.6.1.4.1.33.30382
Generated when alarm point 382 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0383Alarm 1.3.6.1.4.1.33.30383
Generated when alarm point 383 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0384Alarm 1.3.6.1.4.1.33.30384
Generated when alarm point 384 from a high density unit transitions to the alarm state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0001Normal 1.3.6.1.4.1.33.40001
Generated when alarm point 1 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0002Normal 1.3.6.1.4.1.33.40002
Generated when alarm point 2 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0003Normal 1.3.6.1.4.1.33.40003
Generated when alarm point 3 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0004Normal 1.3.6.1.4.1.33.40004
Generated when alarm point 4 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0005Normal 1.3.6.1.4.1.33.40005
Generated when alarm point 5 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0006Normal 1.3.6.1.4.1.33.40006
Generated when alarm point 6 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0007Normal 1.3.6.1.4.1.33.40007
Generated when alarm point 7 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0008Normal 1.3.6.1.4.1.33.40008
Generated when alarm point 8 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0009Normal 1.3.6.1.4.1.33.40009
Generated when alarm point 9 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0010Normal 1.3.6.1.4.1.33.40010
Generated when alarm point 10 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0011Normal 1.3.6.1.4.1.33.40011
Generated when alarm point 11 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0012Normal 1.3.6.1.4.1.33.40012
Generated when alarm point 12 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0013Normal 1.3.6.1.4.1.33.40013
Generated when alarm point 13 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0014Normal 1.3.6.1.4.1.33.40014
Generated when alarm point 14 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0015Normal 1.3.6.1.4.1.33.40015
Generated when alarm point 15 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0016Normal 1.3.6.1.4.1.33.40016
Generated when alarm point 16 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0017Normal 1.3.6.1.4.1.33.40017
Generated when alarm point 17 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0018Normal 1.3.6.1.4.1.33.40018
Generated when alarm point 18 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0019Normal 1.3.6.1.4.1.33.40019
Generated when alarm point 19 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0020Normal 1.3.6.1.4.1.33.40020
Generated when alarm point 20 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0021Normal 1.3.6.1.4.1.33.40021
Generated when alarm point 21 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0022Normal 1.3.6.1.4.1.33.40022
Generated when alarm point 22 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0023Normal 1.3.6.1.4.1.33.40023
Generated when alarm point 23 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0024Normal 1.3.6.1.4.1.33.40024
Generated when alarm point 24 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0025Normal 1.3.6.1.4.1.33.40025
Generated when alarm point 25 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0026Normal 1.3.6.1.4.1.33.40026
Generated when alarm point 26 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0027Normal 1.3.6.1.4.1.33.40027
Generated when alarm point 27 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0028Normal 1.3.6.1.4.1.33.40028
Generated when alarm point 28 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0029Normal 1.3.6.1.4.1.33.40029
Generated when alarm point 29 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0030Normal 1.3.6.1.4.1.33.40030
Generated when alarm point 30 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0031Normal 1.3.6.1.4.1.33.40031
Generated when alarm point 31 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0032Normal 1.3.6.1.4.1.33.40032
Generated when alarm point 32 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0033Normal 1.3.6.1.4.1.33.40033
Generated when alarm point 33 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0034Normal 1.3.6.1.4.1.33.40034
Generated when alarm point 34 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0035Normal 1.3.6.1.4.1.33.40035
Generated when alarm point 35 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0036Normal 1.3.6.1.4.1.33.40036
Generated when alarm point 36 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0037Normal 1.3.6.1.4.1.33.40037
Generated when alarm point 37 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0038Normal 1.3.6.1.4.1.33.40038
Generated when alarm point 38 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0039Normal 1.3.6.1.4.1.33.40039
Generated when alarm point 39 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0040Normal 1.3.6.1.4.1.33.40040
Generated when alarm point 40 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0041Normal 1.3.6.1.4.1.33.40041
Generated when alarm point 41 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0042Normal 1.3.6.1.4.1.33.40042
Generated when alarm point 42 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0043Normal 1.3.6.1.4.1.33.40043
Generated when alarm point 43 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0044Normal 1.3.6.1.4.1.33.40044
Generated when alarm point 44 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0045Normal 1.3.6.1.4.1.33.40045
Generated when alarm point 45 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0046Normal 1.3.6.1.4.1.33.40046
Generated when alarm point 46 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0047Normal 1.3.6.1.4.1.33.40047
Generated when alarm point 47 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0048Normal 1.3.6.1.4.1.33.40048
Generated when alarm point 48 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0049Normal 1.3.6.1.4.1.33.40049
Generated when alarm point 49 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0050Normal 1.3.6.1.4.1.33.40050
Generated when alarm point 50 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0051Normal 1.3.6.1.4.1.33.40051
Generated when alarm point 51 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0052Normal 1.3.6.1.4.1.33.40052
Generated when alarm point 52 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0053Normal 1.3.6.1.4.1.33.40053
Generated when alarm point 53 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0054Normal 1.3.6.1.4.1.33.40054
Generated when alarm point 54 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0055Normal 1.3.6.1.4.1.33.40055
Generated when alarm point 55 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0056Normal 1.3.6.1.4.1.33.40056
Generated when alarm point 56 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0057Normal 1.3.6.1.4.1.33.40057
Generated when alarm point 57 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0058Normal 1.3.6.1.4.1.33.40058
Generated when alarm point 58 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0059Normal 1.3.6.1.4.1.33.40059
Generated when alarm point 59 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0060Normal 1.3.6.1.4.1.33.40060
Generated when alarm point 60 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0061Normal 1.3.6.1.4.1.33.40061
Generated when alarm point 61 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0062Normal 1.3.6.1.4.1.33.40062
Generated when alarm point 62 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0063Normal 1.3.6.1.4.1.33.40063
Generated when alarm point 63 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0064Normal 1.3.6.1.4.1.33.40064
Generated when alarm point 64 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0065Normal 1.3.6.1.4.1.33.40065
Generated when alarm point 65 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0066Normal 1.3.6.1.4.1.33.40066
Generated when alarm point 66 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0067Normal 1.3.6.1.4.1.33.40067
Generated when alarm point 67 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0068Normal 1.3.6.1.4.1.33.40068
Generated when alarm point 68 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0069Normal 1.3.6.1.4.1.33.40069
Generated when alarm point 69 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0070Normal 1.3.6.1.4.1.33.40070
Generated when alarm point 70 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0071Normal 1.3.6.1.4.1.33.40071
Generated when alarm point 71 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0072Normal 1.3.6.1.4.1.33.40072
Generated when alarm point 72 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0073Normal 1.3.6.1.4.1.33.40073
Generated when alarm point 73 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0074Normal 1.3.6.1.4.1.33.40074
Generated when alarm point 74 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0075Normal 1.3.6.1.4.1.33.40075
Generated when alarm point 75 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0076Normal 1.3.6.1.4.1.33.40076
Generated when alarm point 76 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0077Normal 1.3.6.1.4.1.33.40077
Generated when alarm point 77 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0078Normal 1.3.6.1.4.1.33.40078
Generated when alarm point 78 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0079Normal 1.3.6.1.4.1.33.40079
Generated when alarm point 79 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0080Normal 1.3.6.1.4.1.33.40080
Generated when alarm point 80 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0081Normal 1.3.6.1.4.1.33.40081
Generated when alarm point 81 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0082Normal 1.3.6.1.4.1.33.40082
Generated when alarm point 82 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0083Normal 1.3.6.1.4.1.33.40083
Generated when alarm point 83 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0084Normal 1.3.6.1.4.1.33.40084
Generated when alarm point 84 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0085Normal 1.3.6.1.4.1.33.40085
Generated when alarm point 85 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0086Normal 1.3.6.1.4.1.33.40086
Generated when alarm point 86 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0087Normal 1.3.6.1.4.1.33.40087
Generated when alarm point 87 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0088Normal 1.3.6.1.4.1.33.40088
Generated when alarm point 88 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0089Normal 1.3.6.1.4.1.33.40089
Generated when alarm point 89 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0090Normal 1.3.6.1.4.1.33.40090
Generated when alarm point 90 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0091Normal 1.3.6.1.4.1.33.40091
Generated when alarm point 91 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0092Normal 1.3.6.1.4.1.33.40092
Generated when alarm point 92 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0093Normal 1.3.6.1.4.1.33.40093
Generated when alarm point 93 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0094Normal 1.3.6.1.4.1.33.40094
Generated when alarm point 94 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0095Normal 1.3.6.1.4.1.33.40095
Generated when alarm point 95 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0096Normal 1.3.6.1.4.1.33.40096
Generated when alarm point 96 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0097Normal 1.3.6.1.4.1.33.40097
Generated when alarm point 97 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0098Normal 1.3.6.1.4.1.33.40098
Generated when alarm point 98 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0099Normal 1.3.6.1.4.1.33.40099
Generated when alarm point 99 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0100Normal 1.3.6.1.4.1.33.40100
Generated when alarm point 100 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0101Normal 1.3.6.1.4.1.33.40101
Generated when alarm point 101 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0102Normal 1.3.6.1.4.1.33.40102
Generated when alarm point 102 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0103Normal 1.3.6.1.4.1.33.40103
Generated when alarm point 103 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0104Normal 1.3.6.1.4.1.33.40104
Generated when alarm point 104 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0105Normal 1.3.6.1.4.1.33.40105
Generated when alarm point 105 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0106Normal 1.3.6.1.4.1.33.40106
Generated when alarm point 106 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0107Normal 1.3.6.1.4.1.33.40107
Generated when alarm point 107 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0108Normal 1.3.6.1.4.1.33.40108
Generated when alarm point 108 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0109Normal 1.3.6.1.4.1.33.40109
Generated when alarm point 109 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0110Normal 1.3.6.1.4.1.33.40110
Generated when alarm point 110 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0111Normal 1.3.6.1.4.1.33.40111
Generated when alarm point 111 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0112Normal 1.3.6.1.4.1.33.40112
Generated when alarm point 112 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0113Normal 1.3.6.1.4.1.33.40113
Generated when alarm point 113 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0114Normal 1.3.6.1.4.1.33.40114
Generated when alarm point 114 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0115Normal 1.3.6.1.4.1.33.40115
Generated when alarm point 115 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0116Normal 1.3.6.1.4.1.33.40116
Generated when alarm point 116 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0117Normal 1.3.6.1.4.1.33.40117
Generated when alarm point 117 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0118Normal 1.3.6.1.4.1.33.40118
Generated when alarm point 118 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0119Normal 1.3.6.1.4.1.33.40119
Generated when alarm point 119 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0120Normal 1.3.6.1.4.1.33.40120
Generated when alarm point 120 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0121Normal 1.3.6.1.4.1.33.40121
Generated when alarm point 121 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0122Normal 1.3.6.1.4.1.33.40122
Generated when alarm point 122 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0123Normal 1.3.6.1.4.1.33.40123
Generated when alarm point 123 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0124Normal 1.3.6.1.4.1.33.40124
Generated when alarm point 124 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0125Normal 1.3.6.1.4.1.33.40125
Generated when alarm point 125 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0126Normal 1.3.6.1.4.1.33.40126
Generated when alarm point 126 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0127Normal 1.3.6.1.4.1.33.40127
Generated when alarm point 127 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0128Normal 1.3.6.1.4.1.33.40128
Generated when alarm point 128 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0129Normal 1.3.6.1.4.1.33.40129
Generated when alarm point 129 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0130Normal 1.3.6.1.4.1.33.40130
Generated when alarm point 130 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0131Normal 1.3.6.1.4.1.33.40131
Generated when alarm point 131 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0132Normal 1.3.6.1.4.1.33.40132
Generated when alarm point 132 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0133Normal 1.3.6.1.4.1.33.40133
Generated when alarm point 133 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0134Normal 1.3.6.1.4.1.33.40134
Generated when alarm point 134 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0135Normal 1.3.6.1.4.1.33.40135
Generated when alarm point 135 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0136Normal 1.3.6.1.4.1.33.40136
Generated when alarm point 136 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0137Normal 1.3.6.1.4.1.33.40137
Generated when alarm point 137 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0138Normal 1.3.6.1.4.1.33.40138
Generated when alarm point 138 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0139Normal 1.3.6.1.4.1.33.40139
Generated when alarm point 139 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0140Normal 1.3.6.1.4.1.33.40140
Generated when alarm point 140 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0141Normal 1.3.6.1.4.1.33.40141
Generated when alarm point 141 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0142Normal 1.3.6.1.4.1.33.40142
Generated when alarm point 142 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0143Normal 1.3.6.1.4.1.33.40143
Generated when alarm point 143 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0144Normal 1.3.6.1.4.1.33.40144
Generated when alarm point 144 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0145Normal 1.3.6.1.4.1.33.40145
Generated when alarm point 145 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0146Normal 1.3.6.1.4.1.33.40146
Generated when alarm point 146 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0147Normal 1.3.6.1.4.1.33.40147
Generated when alarm point 147 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0148Normal 1.3.6.1.4.1.33.40148
Generated when alarm point 148 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0149Normal 1.3.6.1.4.1.33.40149
Generated when alarm point 149 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0150Normal 1.3.6.1.4.1.33.40150
Generated when alarm point 150 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0151Normal 1.3.6.1.4.1.33.40151
Generated when alarm point 151 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0152Normal 1.3.6.1.4.1.33.40152
Generated when alarm point 152 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0153Normal 1.3.6.1.4.1.33.40153
Generated when alarm point 153 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0154Normal 1.3.6.1.4.1.33.40154
Generated when alarm point 154 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0155Normal 1.3.6.1.4.1.33.40155
Generated when alarm point 155 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0156Normal 1.3.6.1.4.1.33.40156
Generated when alarm point 156 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0157Normal 1.3.6.1.4.1.33.40157
Generated when alarm point 157 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0158Normal 1.3.6.1.4.1.33.40158
Generated when alarm point 158 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0159Normal 1.3.6.1.4.1.33.40159
Generated when alarm point 159 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0160Normal 1.3.6.1.4.1.33.40160
Generated when alarm point 160 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0161Normal 1.3.6.1.4.1.33.40161
Generated when alarm point 161 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0162Normal 1.3.6.1.4.1.33.40162
Generated when alarm point 162 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0163Normal 1.3.6.1.4.1.33.40163
Generated when alarm point 163 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0164Normal 1.3.6.1.4.1.33.40164
Generated when alarm point 164 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0165Normal 1.3.6.1.4.1.33.40165
Generated when alarm point 165 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0166Normal 1.3.6.1.4.1.33.40166
Generated when alarm point 166 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0167Normal 1.3.6.1.4.1.33.40167
Generated when alarm point 167 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0168Normal 1.3.6.1.4.1.33.40168
Generated when alarm point 168 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0169Normal 1.3.6.1.4.1.33.40169
Generated when alarm point 169 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0170Normal 1.3.6.1.4.1.33.40170
Generated when alarm point 170 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0171Normal 1.3.6.1.4.1.33.40171
Generated when alarm point 171 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0172Normal 1.3.6.1.4.1.33.40172
Generated when alarm point 172 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0173Normal 1.3.6.1.4.1.33.40173
Generated when alarm point 173 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0174Normal 1.3.6.1.4.1.33.40174
Generated when alarm point 174 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0175Normal 1.3.6.1.4.1.33.40175
Generated when alarm point 175 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0176Normal 1.3.6.1.4.1.33.40176
Generated when alarm point 176 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0177Normal 1.3.6.1.4.1.33.40177
Generated when alarm point 177 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0178Normal 1.3.6.1.4.1.33.40178
Generated when alarm point 178 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0179Normal 1.3.6.1.4.1.33.40179
Generated when alarm point 179 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0180Normal 1.3.6.1.4.1.33.40180
Generated when alarm point 180 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0181Normal 1.3.6.1.4.1.33.40181
Generated when alarm point 181 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0182Normal 1.3.6.1.4.1.33.40182
Generated when alarm point 182 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0183Normal 1.3.6.1.4.1.33.40183
Generated when alarm point 183 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0184Normal 1.3.6.1.4.1.33.40184
Generated when alarm point 184 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0185Normal 1.3.6.1.4.1.33.40185
Generated when alarm point 185 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0186Normal 1.3.6.1.4.1.33.40186
Generated when alarm point 186 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0187Normal 1.3.6.1.4.1.33.40187
Generated when alarm point 187 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0188Normal 1.3.6.1.4.1.33.40188
Generated when alarm point 188 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0189Normal 1.3.6.1.4.1.33.40189
Generated when alarm point 189 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0190Normal 1.3.6.1.4.1.33.40190
Generated when alarm point 190 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0191Normal 1.3.6.1.4.1.33.40191
Generated when alarm point 191 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0192Normal 1.3.6.1.4.1.33.40192
Generated when alarm point 192 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0193Normal 1.3.6.1.4.1.33.40193
Generated when alarm point 193 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0194Normal 1.3.6.1.4.1.33.40194
Generated when alarm point 194 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0195Normal 1.3.6.1.4.1.33.40195
Generated when alarm point 195 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0196Normal 1.3.6.1.4.1.33.40196
Generated when alarm point 196 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0197Normal 1.3.6.1.4.1.33.40197
Generated when alarm point 197 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0198Normal 1.3.6.1.4.1.33.40198
Generated when alarm point 198 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0199Normal 1.3.6.1.4.1.33.40199
Generated when alarm point 199 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0200Normal 1.3.6.1.4.1.33.40200
Generated when alarm point 200 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0201Normal 1.3.6.1.4.1.33.40201
Generated when alarm point 201 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0202Normal 1.3.6.1.4.1.33.40202
Generated when alarm point 202 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0203Normal 1.3.6.1.4.1.33.40203
Generated when alarm point 203 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0204Normal 1.3.6.1.4.1.33.40204
Generated when alarm point 204 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0205Normal 1.3.6.1.4.1.33.40205
Generated when alarm point 205 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0206Normal 1.3.6.1.4.1.33.40206
Generated when alarm point 206 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0207Normal 1.3.6.1.4.1.33.40207
Generated when alarm point 207 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0208Normal 1.3.6.1.4.1.33.40208
Generated when alarm point 208 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0209Normal 1.3.6.1.4.1.33.40209
Generated when alarm point 209 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0210Normal 1.3.6.1.4.1.33.40210
Generated when alarm point 210 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0211Normal 1.3.6.1.4.1.33.40211
Generated when alarm point 211 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0212Normal 1.3.6.1.4.1.33.40212
Generated when alarm point 212 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0213Normal 1.3.6.1.4.1.33.40213
Generated when alarm point 213 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0214Normal 1.3.6.1.4.1.33.40214
Generated when alarm point 214 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0215Normal 1.3.6.1.4.1.33.40215
Generated when alarm point 215 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0216Normal 1.3.6.1.4.1.33.40216
Generated when alarm point 216 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0217Normal 1.3.6.1.4.1.33.40217
Generated when alarm point 217 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0218Normal 1.3.6.1.4.1.33.40218
Generated when alarm point 218 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0219Normal 1.3.6.1.4.1.33.40219
Generated when alarm point 219 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0220Normal 1.3.6.1.4.1.33.40220
Generated when alarm point 220 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0221Normal 1.3.6.1.4.1.33.40221
Generated when alarm point 221 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0222Normal 1.3.6.1.4.1.33.40222
Generated when alarm point 222 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0223Normal 1.3.6.1.4.1.33.40223
Generated when alarm point 223 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0224Normal 1.3.6.1.4.1.33.40224
Generated when alarm point 224 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0225Normal 1.3.6.1.4.1.33.40225
Generated when alarm point 225 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0226Normal 1.3.6.1.4.1.33.40226
Generated when alarm point 226 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0227Normal 1.3.6.1.4.1.33.40227
Generated when alarm point 227 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0228Normal 1.3.6.1.4.1.33.40228
Generated when alarm point 228 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0229Normal 1.3.6.1.4.1.33.40229
Generated when alarm point 229 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0230Normal 1.3.6.1.4.1.33.40230
Generated when alarm point 230 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0231Normal 1.3.6.1.4.1.33.40231
Generated when alarm point 231 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0232Normal 1.3.6.1.4.1.33.40232
Generated when alarm point 232 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0233Normal 1.3.6.1.4.1.33.40233
Generated when alarm point 233 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0234Normal 1.3.6.1.4.1.33.40234
Generated when alarm point 234 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0235Normal 1.3.6.1.4.1.33.40235
Generated when alarm point 235 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0236Normal 1.3.6.1.4.1.33.40236
Generated when alarm point 236 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0237Normal 1.3.6.1.4.1.33.40237
Generated when alarm point 237 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0238Normal 1.3.6.1.4.1.33.40238
Generated when alarm point 238 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0239Normal 1.3.6.1.4.1.33.40239
Generated when alarm point 239 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0240Normal 1.3.6.1.4.1.33.40240
Generated when alarm point 240 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0241Normal 1.3.6.1.4.1.33.40241
Generated when alarm point 241 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0242Normal 1.3.6.1.4.1.33.40242
Generated when alarm point 242 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0243Normal 1.3.6.1.4.1.33.40243
Generated when alarm point 243 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0244Normal 1.3.6.1.4.1.33.40244
Generated when alarm point 244 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0245Normal 1.3.6.1.4.1.33.40245
Generated when alarm point 245 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0246Normal 1.3.6.1.4.1.33.40246
Generated when alarm point 246 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0247Normal 1.3.6.1.4.1.33.40247
Generated when alarm point 247 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0248Normal 1.3.6.1.4.1.33.40248
Generated when alarm point 248 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0249Normal 1.3.6.1.4.1.33.40249
Generated when alarm point 249 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0250Normal 1.3.6.1.4.1.33.40250
Generated when alarm point 250 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0251Normal 1.3.6.1.4.1.33.40251
Generated when alarm point 251 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0252Normal 1.3.6.1.4.1.33.40252
Generated when alarm point 252 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0253Normal 1.3.6.1.4.1.33.40253
Generated when alarm point 253 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0254Normal 1.3.6.1.4.1.33.40254
Generated when alarm point 254 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0255Normal 1.3.6.1.4.1.33.40255
Generated when alarm point 255 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0256Normal 1.3.6.1.4.1.33.40256
Generated when alarm point 256 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0257Normal 1.3.6.1.4.1.33.40257
Generated when alarm point 257 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0258Normal 1.3.6.1.4.1.33.40258
Generated when alarm point 258 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0259Normal 1.3.6.1.4.1.33.40259
Generated when alarm point 259 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0260Normal 1.3.6.1.4.1.33.40260
Generated when alarm point 260 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0261Normal 1.3.6.1.4.1.33.40261
Generated when alarm point 261 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0262Normal 1.3.6.1.4.1.33.40262
Generated when alarm point 262 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0263Normal 1.3.6.1.4.1.33.40263
Generated when alarm point 263 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0264Normal 1.3.6.1.4.1.33.40264
Generated when alarm point 264 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0265Normal 1.3.6.1.4.1.33.40265
Generated when alarm point 265 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0266Normal 1.3.6.1.4.1.33.40266
Generated when alarm point 266 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0267Normal 1.3.6.1.4.1.33.40267
Generated when alarm point 267 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0268Normal 1.3.6.1.4.1.33.40268
Generated when alarm point 268 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0269Normal 1.3.6.1.4.1.33.40269
Generated when alarm point 269 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0270Normal 1.3.6.1.4.1.33.40270
Generated when alarm point 270 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0271Normal 1.3.6.1.4.1.33.40271
Generated when alarm point 271 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0272Normal 1.3.6.1.4.1.33.40272
Generated when alarm point 272 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0273Normal 1.3.6.1.4.1.33.40273
Generated when alarm point 273 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0274Normal 1.3.6.1.4.1.33.40274
Generated when alarm point 274 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0275Normal 1.3.6.1.4.1.33.40275
Generated when alarm point 275 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0276Normal 1.3.6.1.4.1.33.40276
Generated when alarm point 276 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0277Normal 1.3.6.1.4.1.33.40277
Generated when alarm point 277 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0278Normal 1.3.6.1.4.1.33.40278
Generated when alarm point 278 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0279Normal 1.3.6.1.4.1.33.40279
Generated when alarm point 279 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0280Normal 1.3.6.1.4.1.33.40280
Generated when alarm point 280 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0281Normal 1.3.6.1.4.1.33.40281
Generated when alarm point 281 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0282Normal 1.3.6.1.4.1.33.40282
Generated when alarm point 282 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0283Normal 1.3.6.1.4.1.33.40283
Generated when alarm point 283 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0284Normal 1.3.6.1.4.1.33.40284
Generated when alarm point 284 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0285Normal 1.3.6.1.4.1.33.40285
Generated when alarm point 285 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0286Normal 1.3.6.1.4.1.33.40286
Generated when alarm point 286 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0287Normal 1.3.6.1.4.1.33.40287
Generated when alarm point 287 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0288Normal 1.3.6.1.4.1.33.40288
Generated when alarm point 288 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0289Normal 1.3.6.1.4.1.33.40289
Generated when alarm point 289 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0290Normal 1.3.6.1.4.1.33.40290
Generated when alarm point 290 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0291Normal 1.3.6.1.4.1.33.40291
Generated when alarm point 291 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0292Normal 1.3.6.1.4.1.33.40292
Generated when alarm point 292 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0293Normal 1.3.6.1.4.1.33.40293
Generated when alarm point 293 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0294Normal 1.3.6.1.4.1.33.40294
Generated when alarm point 294 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0295Normal 1.3.6.1.4.1.33.40295
Generated when alarm point 295 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0296Normal 1.3.6.1.4.1.33.40296
Generated when alarm point 296 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0297Normal 1.3.6.1.4.1.33.40297
Generated when alarm point 297 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0298Normal 1.3.6.1.4.1.33.40298
Generated when alarm point 298 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0299Normal 1.3.6.1.4.1.33.40299
Generated when alarm point 299 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0300Normal 1.3.6.1.4.1.33.40300
Generated when alarm point 300 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0301Normal 1.3.6.1.4.1.33.40301
Generated when alarm point 301 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0302Normal 1.3.6.1.4.1.33.40302
Generated when alarm point 302 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0303Normal 1.3.6.1.4.1.33.40303
Generated when alarm point 303 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0304Normal 1.3.6.1.4.1.33.40304
Generated when alarm point 304 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0305Normal 1.3.6.1.4.1.33.40305
Generated when alarm point 305 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0306Normal 1.3.6.1.4.1.33.40306
Generated when alarm point 306 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0307Normal 1.3.6.1.4.1.33.40307
Generated when alarm point 307 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0308Normal 1.3.6.1.4.1.33.40308
Generated when alarm point 308 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0309Normal 1.3.6.1.4.1.33.40309
Generated when alarm point 309 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0310Normal 1.3.6.1.4.1.33.40310
Generated when alarm point 310 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0311Normal 1.3.6.1.4.1.33.40311
Generated when alarm point 311 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0312Normal 1.3.6.1.4.1.33.40312
Generated when alarm point 312 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0313Normal 1.3.6.1.4.1.33.40313
Generated when alarm point 313 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0314Normal 1.3.6.1.4.1.33.40314
Generated when alarm point 314 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0315Normal 1.3.6.1.4.1.33.40315
Generated when alarm point 315 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0316Normal 1.3.6.1.4.1.33.40316
Generated when alarm point 316 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0317Normal 1.3.6.1.4.1.33.40317
Generated when alarm point 317 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0318Normal 1.3.6.1.4.1.33.40318
Generated when alarm point 318 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0319Normal 1.3.6.1.4.1.33.40319
Generated when alarm point 319 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0320Normal 1.3.6.1.4.1.33.40320
Generated when alarm point 320 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0321Normal 1.3.6.1.4.1.33.40321
Generated when alarm point 321 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0322Normal 1.3.6.1.4.1.33.40322
Generated when alarm point 322 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0323Normal 1.3.6.1.4.1.33.40323
Generated when alarm point 323 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0324Normal 1.3.6.1.4.1.33.40324
Generated when alarm point 324 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0325Normal 1.3.6.1.4.1.33.40325
Generated when alarm point 325 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0326Normal 1.3.6.1.4.1.33.40326
Generated when alarm point 326 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0327Normal 1.3.6.1.4.1.33.40327
Generated when alarm point 327 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0328Normal 1.3.6.1.4.1.33.40328
Generated when alarm point 328 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0329Normal 1.3.6.1.4.1.33.40329
Generated when alarm point 329 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0330Normal 1.3.6.1.4.1.33.40330
Generated when alarm point 330 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0331Normal 1.3.6.1.4.1.33.40331
Generated when alarm point 331 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0332Normal 1.3.6.1.4.1.33.40332
Generated when alarm point 332 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0333Normal 1.3.6.1.4.1.33.40333
Generated when alarm point 333 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0334Normal 1.3.6.1.4.1.33.40334
Generated when alarm point 334 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0335Normal 1.3.6.1.4.1.33.40335
Generated when alarm point 335 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0336Normal 1.3.6.1.4.1.33.40336
Generated when alarm point 336 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0337Normal 1.3.6.1.4.1.33.40337
Generated when alarm point 337 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0338Normal 1.3.6.1.4.1.33.40338
Generated when alarm point 338 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0339Normal 1.3.6.1.4.1.33.40339
Generated when alarm point 339 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0340Normal 1.3.6.1.4.1.33.40340
Generated when alarm point 340 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0341Normal 1.3.6.1.4.1.33.40341
Generated when alarm point 341 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0342Normal 1.3.6.1.4.1.33.40342
Generated when alarm point 342 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0343Normal 1.3.6.1.4.1.33.40343
Generated when alarm point 343 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0344Normal 1.3.6.1.4.1.33.40344
Generated when alarm point 344 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0345Normal 1.3.6.1.4.1.33.40345
Generated when alarm point 345 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0346Normal 1.3.6.1.4.1.33.40346
Generated when alarm point 346 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0347Normal 1.3.6.1.4.1.33.40347
Generated when alarm point 347 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0348Normal 1.3.6.1.4.1.33.40348
Generated when alarm point 348 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0349Normal 1.3.6.1.4.1.33.40349
Generated when alarm point 349 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0350Normal 1.3.6.1.4.1.33.40350
Generated when alarm point 350 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0351Normal 1.3.6.1.4.1.33.40351
Generated when alarm point 351 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0352Normal 1.3.6.1.4.1.33.40352
Generated when alarm point 352 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0353Normal 1.3.6.1.4.1.33.40353
Generated when alarm point 353 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0354Normal 1.3.6.1.4.1.33.40354
Generated when alarm point 354 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0355Normal 1.3.6.1.4.1.33.40355
Generated when alarm point 355 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0356Normal 1.3.6.1.4.1.33.40356
Generated when alarm point 356 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0357Normal 1.3.6.1.4.1.33.40357
Generated when alarm point 357 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0358Normal 1.3.6.1.4.1.33.40358
Generated when alarm point 358 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0359Normal 1.3.6.1.4.1.33.40359
Generated when alarm point 359 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0360Normal 1.3.6.1.4.1.33.40360
Generated when alarm point 360 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0361Normal 1.3.6.1.4.1.33.40361
Generated when alarm point 361 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0362Normal 1.3.6.1.4.1.33.40362
Generated when alarm point 362 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0363Normal 1.3.6.1.4.1.33.40363
Generated when alarm point 363 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0364Normal 1.3.6.1.4.1.33.40364
Generated when alarm point 364 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0365Normal 1.3.6.1.4.1.33.40365
Generated when alarm point 365 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0366Normal 1.3.6.1.4.1.33.40366
Generated when alarm point 366 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0367Normal 1.3.6.1.4.1.33.40367
Generated when alarm point 367 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0368Normal 1.3.6.1.4.1.33.40368
Generated when alarm point 368 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0369Normal 1.3.6.1.4.1.33.40369
Generated when alarm point 369 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0370Normal 1.3.6.1.4.1.33.40370
Generated when alarm point 370 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0371Normal 1.3.6.1.4.1.33.40371
Generated when alarm point 371 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0372Normal 1.3.6.1.4.1.33.40372
Generated when alarm point 372 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0373Normal 1.3.6.1.4.1.33.40373
Generated when alarm point 373 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0374Normal 1.3.6.1.4.1.33.40374
Generated when alarm point 374 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0375Normal 1.3.6.1.4.1.33.40375
Generated when alarm point 375 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0376Normal 1.3.6.1.4.1.33.40376
Generated when alarm point 376 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0377Normal 1.3.6.1.4.1.33.40377
Generated when alarm point 377 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0378Normal 1.3.6.1.4.1.33.40378
Generated when alarm point 378 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0379Normal 1.3.6.1.4.1.33.40379
Generated when alarm point 379 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0380Normal 1.3.6.1.4.1.33.40380
Generated when alarm point 380 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0381Normal 1.3.6.1.4.1.33.40381
Generated when alarm point 381 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0382Normal 1.3.6.1.4.1.33.40382
Generated when alarm point 382 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0383Normal 1.3.6.1.4.1.33.40383
Generated when alarm point 383 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

alarmInputHighDensity0384Normal 1.3.6.1.4.1.33.40384
Generated when alarm point 384 from a high density unit transitions to the normal state.
TRAP-TYPE    
  basicAlarmMasterInputValue  
  basicAlarmMasterInputName  
  sysLocation  
  basicAlarmMasterInputPort  
  basicAlarmMasterInputStatus  
  basicAlarmMasterInputSlot  
  basicAlarmMasterInputPoint  
  basicAlarmMasterInputZone  
  basicAlarmMasterInputRelatedEquipment  
  basicAlarmMasterInputSiteId  
  basicAlarmMasterInputManufacturer  
  basicAlarmMasterInputModel  

Defined Objects

DisplayString  
OCTET STRING    

PhysAddress  
OCTET STRING    

IfEntry  
SEQUENCE    
  INTEGER as ifIndex  
  DisplayString as ifDescr  
  INTEGER as ifType  
  INTEGER as ifMtu  
  Gauge as ifSpeed  
  PhysAddress as ifPhysAddress  
  INTEGER as ifAdminStatus  
  INTEGER as ifOperStatus  
  TimeTicks as ifLastChange  
  Counter as ifInOctets  
  Counter as ifInUcastPkts  
  Counter as ifInNUcastPkts  
  Counter as ifInDiscards  
  Counter as ifInErrors  
  Counter as ifInUnknownProtos  
  Counter as ifOutOctets  
  Counter as ifOutUcastPkts  
  Counter as ifOutNUcastPkts  
  Counter as ifOutDiscards  
  Counter as ifOutErrors  
  Gauge as ifOutQLen  
  OBJECT IDENTIFIER as ifSpecific  

AtEntry  
SEQUENCE    
  INTEGER as atIfIndex  
  PhysAddress as atPhysAddress  
  NetworkAddress as atNetAddress  

IpAddrEntry  
SEQUENCE    
  IpAddress as ipAdEntAddr  
  INTEGER as ipAdEntIfIndex  
  IpAddress as ipAdEntNetMask  
  INTEGER as ipAdEntBcastAddr  
  INTEGER as ipAdEntReasmMaxSize 0..65535  

IpRouteEntry  
SEQUENCE    
  IpAddress as ipRouteDest  
  INTEGER as ipRouteIfIndex  
  INTEGER as ipRouteMetric1  
  INTEGER as ipRouteMetric2  
  INTEGER as ipRouteMetric3  
  INTEGER as ipRouteMetric4  
  IpAddress as ipRouteNextHop  
  INTEGER as ipRouteType  
  INTEGER as ipRouteProto  
  INTEGER as ipRouteAge  
  IpAddress as ipRouteMask  
  INTEGER as ipRouteMetric5  
  OBJECT IDENTIFIER as ipRouteInfo  

IpNetToMediaEntry  
SEQUENCE    
  INTEGER as ipNetToMediaIfIndex  
  PhysAddress as ipNetToMediaPhysAddress  
  IpAddress as ipNetToMediaNetAddress  
  INTEGER as ipNetToMediaType  

TcpConnEntry  
SEQUENCE    
  INTEGER as tcpConnState  
  IpAddress as tcpConnLocalAddress  
  INTEGER as tcpConnLocalPort 0..65535  
  IpAddress as tcpConnRemAddress  
  INTEGER as tcpConnRemPort 0..65535  

UdpEntry  
SEQUENCE    
  IpAddress as udpLocalAddress  
  INTEGER as udpLocalPort 0..65535  

EgpNeighEntry  
SEQUENCE    
  INTEGER as egpNeighState  
  IpAddress as egpNeighAddr  
  INTEGER as egpNeighAs  
  Counter as egpNeighInMsgs  
  Counter as egpNeighInErrs  
  Counter as egpNeighOutMsgs  
  Counter as egpNeighOutErrs  
  Counter as egpNeighInErrMsgs  
  Counter as egpNeighOutErrMsgs  
  Counter as egpNeighStateUps  
  Counter as egpNeighStateDowns  
  INTEGER as egpNeighIntervalHello  
  INTEGER as egpNeighIntervalPoll  
  INTEGER as egpNeighMode  
  INTEGER as egpNeighEventTrigger  

AutonomousType  
OBJECT IDENTIFIER    

InstancePointer  
OBJECT IDENTIFIER    

CharPortEntry  
SEQUENCE    
  INTEGER as charPortIndex  
  DisplayString as charPortName  
  INTEGER as charPortType  
  AutonomousType as charPortHardware  
  INTEGER as charPortReset  
  INTEGER as charPortAdminStatus  
  INTEGER as charPortOperStatus  
  TimeTicks as charPortLastChange  
  INTEGER as charPortInFlowType  
  INTEGER as charPortOutFlowType  
  INTEGER as charPortInFlowState  
  INTEGER as charPortOutFlowState  
  Counter as charPortInCharacters  
  Counter as charPortOutCharacters  
  INTEGER as charPortAdminOrigin  
  INTEGER as charPortSessionMaximum  
  Gauge as charPortSessionNumber  
  INTEGER as charPortSessionIndex  

CharSessEntry  
SEQUENCE    
  INTEGER as charSessPortIndex  
  INTEGER as charSessIndex  
  INTEGER as charSessKill  
  INTEGER as charSessState  
  AutonomousType as charSessProtocol  
  INTEGER as charSessOperOrigin  
  Counter as charSessInCharacters  
  Counter as charSessOutCharacters  
  InstancePointer as charSessConnectionId  
  TimeTicks as charSessStartTime  

Rs232PortEntry  
SEQUENCE    
  INTEGER as rs232PortIndex  
  INTEGER as rs232PortType  
  INTEGER as rs232PortInSigNumber  
  INTEGER as rs232PortOutSigNumber  
  INTEGER as rs232PortInSpeed  
  INTEGER as rs232PortOutSpeed  

Rs232AsyncPortEntry  
SEQUENCE    
  INTEGER as rs232AsyncPortIndex  
  INTEGER as rs232AsyncPortBits  
  INTEGER as rs232AsyncPortStopBits  
  INTEGER as rs232AsyncPortParity  
  INTEGER as rs232AsyncPortAutobaud  
  Counter as rs232AsyncPortParityErrs  
  Counter as rs232AsyncPortFramingErrs  
  Counter as rs232AsyncPortOverrunErrs  

Rs232SyncPortEntry  
SEQUENCE    
  INTEGER as rs232SyncPortIndex  
  INTEGER as rs232SyncPortClockSource  
  Counter as rs232SyncPortFrameCheckErrs  
  Counter as rs232SyncPortTransmitUnderrunErrs  
  Counter as rs232SyncPortReceiveOverrunErrs  
  Counter as rs232SyncPortInterruptedFrames  
  Counter as rs232SyncPortAbortedFrames  

Rs232InSigEntry  
SEQUENCE    
  INTEGER as rs232InSigPortIndex  
  INTEGER as rs232InSigName  
  INTEGER as rs232InSigState  
  Counter as rs232InSigChanges  

Rs232OutSigEntry  
SEQUENCE    
  INTEGER as rs232OutSigPortIndex  
  INTEGER as rs232OutSigName  
  INTEGER as rs232OutSigState  
  Counter as rs232OutSigChanges  

PhivAddr  
OCTET STRING SIZE(2)    

PhivCounter  
INTEGER    

PhivCircuitParametersEntry  
SEQUENCE    
  INTEGER as phivCircuitIndex  
  INTEGER as phivCircuitLineIndex  
  INTEGER as phivCircuitCommonState  
  INTEGER as phivCircuitCommonSubState  
  DisplayString as phivCircuitCommonName  
  INTEGER as phivCircuitExecRecallTimer  
  INTEGER as phivCircuitCommonType  
  INTEGER as phivCircuitService  
  INTEGER as phivCircuitExecCost  
  INTEGER as phivCircuitExecHelloTimer  

PhivCircuitCountEntry  
SEQUENCE    
  PhivCounter as phivCircuitCountSecLastZeroed 0..65535  
  PhivCounter as phivCircuitCountTermPacketsRecd  
  PhivCounter as phivCircuitCountOriginPackSent  
  PhivCounter as phivCircuitCountTermCongLoss 0..65535  
  PhivCounter as phivCircuitCountCorruptLoss 0..255  
  PhivCounter as phivCircuitCountTransitPksRecd  
  PhivCounter as phivCircuitCountTransitPkSent  
  PhivCounter as phivCircuitCountTransitCongestLoss 0..65535  
  PhivCounter as phivCircuitCountCircuitDown 0..255  
  PhivCounter as phivCircuitCountInitFailure 0..255  
  PhivCounter as phivCircuitCountAdjDown  
  PhivCounter as phivCircuitCountPeakAdj  
  PhivCounter as phivCircuitCountBytesRecd  
  PhivCounter as phivCircuitCountBytesSent  
  PhivCounter as phivCircuitCountDataBlocksRecd 0..65535  
  PhivCounter as phivCircuitCountDataBlocksSent  
  PhivCounter as phivCircuitCountUsrBuffUnav 0..65535  

MacAddress  
OCTET STRING SIZE(6)    

BridgeId  
OCTET STRING SIZE(8)    

Timeout  
INTEGER    

Dot1dBasePortEntry  
SEQUENCE    
  INTEGER as dot1dBasePort  
  INTEGER as dot1dBasePortIfIndex  
  OBJECT IDENTIFIER as dot1dBasePortCircuit  
  Counter as dot1dBasePortDelayExceededDiscards  
  Counter as dot1dBasePortMtuExceededDiscards  

Dot1dStpPortEntry  
SEQUENCE    
  INTEGER as dot1dStpPort  
  INTEGER as dot1dStpPortPriority  
  INTEGER as dot1dStpPortState  
  INTEGER as dot1dStpPortEnable  
  INTEGER as dot1dStpPortPathCost  
  BridgeId as dot1dStpPortDesignatedRoot  
  INTEGER as dot1dStpPortDesignatedCost  
  BridgeId as dot1dStpPortDesignatedBridge  
  OCTET STRING as dot1dStpPortDesignatedPort  
  Counter as dot1dStpPortForwardTransitions  

Dot1dTpFdbEntry  
SEQUENCE    
  MacAddress as dot1dTpFdbAddress  
  INTEGER as dot1dTpFdbPort  
  INTEGER as dot1dTpFdbStatus  

Dot1dTpPortEntry  
SEQUENCE    
  INTEGER as dot1dTpPort  
  INTEGER as dot1dTpPortMaxInfo  
  Counter as dot1dTpPortInFrames  
  Counter as dot1dTpPortOutFrames  
  Counter as dot1dTpPortInDiscards  

Dot1dStaticEntry  
SEQUENCE    
  MacAddress as dot1dStaticAddress  
  INTEGER as dot1dStaticReceivePort  
  OCTET STRING as dot1dStaticAllowedToGoTo  
  INTEGER as dot1dStaticStatus  

AreaID  
IpAddress    

RouterID  
IpAddress    

Metric  
INTEGER 1..'FFFF'h    

BigMetric  
INTEGER 1..'FFFFFF'h    

TruthValue  
INTEGER true(1), false(2)    

Status  
INTEGER enabled(1), disabled(2)    

Validation  
INTEGER valid(1), invalid(2)    

PositiveInteger  
INTEGER 1..'FFFFFFFF'h    

HelloRange  
INTEGER 1..'FFFF'h    

UpToMaxAge  
INTEGER 1..3600    

InterfaceIndex  
INTEGER    

DesignatedRouterPriority  
INTEGER 0..'FF'h    

TOSType  
INTEGER 0..31    

PppLinkStatusEntry  
SEQUENCE    
  INTEGER as pppLinkStatusPhysicalIndex  
  Counter as pppLinkStatusBadAddresses  
  Counter as pppLinkStatusBadControls  
  Counter as pppLinkStatusPacketTooLongs  
  Counter as pppLinkStatusBadFCSs  
  INTEGER as pppLinkStatusLocalMRU  
  INTEGER as pppLinkStatusRemoteMRU  
  OCTET STRING as pppLinkStatusLocalToPeerACCMap  
  OCTET STRING as pppLinkStatusPeerToLocalACCMap  
  INTEGER as pppLinkStatusLocalToRemoteProtocolCompression  
  INTEGER as pppLinkStatusRemoteToLocalProtocolCompression  
  INTEGER as pppLinkStatusLocalToRemoteACCompression  
  INTEGER as pppLinkStatusRemoteToLocalACCompression  
  INTEGER as pppLinkStatusTransmitFcsSize  
  INTEGER as pppLinkStatusReceiveFcsSize  

PppLinkConfigEntry  
SEQUENCE    
  INTEGER as pppLinkConfigInitialMRU  
  OCTET STRING as pppLinkConfigReceiveACCMap  
  OCTET STRING as pppLinkConfigTransmitACCMap  
  INTEGER as pppLinkConfigMagicNumber  
  INTEGER as pppLinkConfigFcsSize  

PppIpEntry  
SEQUENCE    
  INTEGER as pppIpOperStatus  
  INTEGER as pppIpLocalToRemoteCompressionProtocol  
  INTEGER as pppIpRemoteToLocalCompressionProtocol  
  INTEGER as pppIpRemoteMaxSlotId  
  INTEGER as pppIpLocalMaxSlotId  

PppIpConfigEntry  
SEQUENCE    
  INTEGER as pppIpConfigAdminStatus  
  INTEGER as pppIpConfigCompression  

DateTime  
OCTET STRING SIZE(8)    

AddressType  
INTEGER unknown(1), other(2), local(3), ip(4), ethernet(5)    

TypedAddress  
OCTET STRING SIZE(1..32)    

SoftwareType  
INTEGER terminalServer(1), bridge(3), repeater(4), bridgeRouter(5), router(6), bridgeRouterRepeater(7), switch(8), oem(9)    

HardwareType  
INTEGER unknown(1), em1608(29), ir7520(30), ir9020(31), ir7020(32), mxTServJ8(33), mxTservJ16(34), mxManF2(35), mx1500(36), mx1100(37), mx1800(38), mxNpcP1(39), mxTsrLJ16(40), mxTsrvLJ8(41), mxTsrvMj8(42), mxTsrvNJ8(43), mxTsrvOJ8(44), mx1400(45), mx6510(46), mxRb2(47), mx1500x8(49), mx1710(50), mx2710(51), ts3395(52), mx1120(53), mx1520(54), mx1820(55), mx2220(56), mx3510(57), mx6625(58), mx2120(59), mx6020(60), mx3610(61), etsmim(62), mx3010(63), mx6025(64), lannetTs(65), fn1500(66), dpXp1(67), mx3710(68), mx3210(69), mx6710(70), mx6220(71), mx1600a(74), mx1450(75), ts720(76), so3395aTs(77), mx1608(78), mx2210a(79), br401(80), mx6800a(81), notApplicable(83), rp210(84), mx6800b(85), mx1620(86), mx2240(87), ps3m(88), lb2Wan(89), nio1600(90), asy160(91), mx1640(92), br220(93), rp211(94), br221(95), mx2210b(96), mx1600b(97), mx1600c(98), mx800a(99), mx1600d(100), tokenRing(101), mx800b(102), br501(103), br350(105), br350ExpansionSlot(107), n3000(108), br402(109), sw610(110), sw610S(111), br501s(112), br501c(113), br501sc(114), routeRunnerIsdnSt(115), routeRunner(116), mx1608a(117), routerRunnerIsdnU(118), mx1608b(119), mx1604(120), n3000Ias(123), irMgr0Rdc(124), ir9040(125), ir7040(126), irMgr0(127), irM800(128), irM700(129), ir8020(130), ir8040(131), ir7004(132), ir7008(133), ir8004(134), ir8008(135), irM900(136), irMGR0AC(137), irMGR0AC-IN(138), ir9004(139), ir9008(140), ir9504(141), n3000SP(230)    

ChassisType  
INTEGER other(1), mx45xx(2), net9000(3), net9000SWITCH(4)    

IOType  
INTEGER io616(16), dualE175(32), dualT1(33), bri8(34), io351d(35), io352d(36), dualE1120(37), singleT1(38), singleE175(39), singleE1120(40), io625(128), io626(129), io601(144), io602(145), io603(146), io601A(147), io602A(148), io603A(149), io604(150), io621(155), io622(156), io623(157), io624(158), io301x12(160), io521(174), io522(175), io512x3(176), io511x3(177), io520(178), io514(179), io513(180), io470x4(182), io469x2(183), io467x4(184), io467x2(185), io468x4(186), io468x2(187), io466x4(188), io465x2(189), io464x4(190), io463x2(191), io201(192), io202(193), io204(194), io203(195), io251(196), io231(197), io254(198), io206(199), io253(200), io256(201), io201a(202), io202a(203), io203a(204), ioRepeater(207), io205x12(209), io205(210), io255(214), io722(224), io721(225), io411(226), io724(227), io725(231), io723(232), io462(233), io412(234), ioTS16a(235), ioTS16b(236), io461(237), io101(238), io119(239)    

DdpAddress  
OCTET STRING SIZE(3)    

ApplePortEntry  
SEQUENCE    
  INTEGER as applePortIndex  
  INTEGER as applePortProtocolPriority  
  INTEGER as applePortArpInterval  
  INTEGER as applePortArpRetransmitCount  
  INTEGER as applePortChecksum  
  Counter as applePortPacketsIn  
  Counter as applePortPacketsOut  
  Counter as applePortForwardsIn  
  Counter as applePortForwardsOut  
  DdpAddress as applePortNetAddress  
  OCTET STRING as applePortNetStart  
  OCTET STRING as applePortNetEnd  
  Counter as applePortErrors  
  INTEGER as applePortLastError  
  TimeTicks as applePortLastErrorTime  
  OCTET STRING as applePortLastErrorData  
  INTEGER as applePortBringBackTime  
  INTEGER as applePortUseNeighborNotify  
  INTEGER as applePortRouterType  

ApplePortZoneEntry  
SEQUENCE    
  INTEGER as applePortZoneIndex  
  OCTET STRING as applePortZoneName  
  INTEGER as applePortZoneStatus  

ApplePortExportEntry  
SEQUENCE    
  INTEGER as applePortExportIndex  
  OCTET STRING as applePortExportZone  
  OCTET STRING as applePortExportName  
  OCTET STRING as applePortExportType  
  INTEGER as applePortExportAction  
  INTEGER as applePortExportStatus  

ApplePortImportEntry  
SEQUENCE    
  INTEGER as applePortImportIndex  
  OCTET STRING as applePortImportZone  
  OCTET STRING as applePortImportName  
  OCTET STRING as applePortImportType  
  INTEGER as applePortImportAction  
  INTEGER as applePortImportStatus  

AppleNbpEntry  
SEQUENCE    
  OCTET STRING as appleNbpZone  
  OCTET STRING as appleNbpName  
  OCTET STRING as appleNbpType  
  DdpAddress as appleNbpNode  
  INTEGER as appleNbpSocket  

AppleTrafficEntry  
SEQUENCE    
  INTEGER as appleTrafficIndex  
  INTEGER as appleTrafficPercent  
  DdpAddress as appleTrafficDst  
  DdpAddress as appleTrafficSrc  
  INTEGER as appleTrafficIntf  

ArapPortEntry  
SEQUENCE    
  INTEGER as arapPortEnabled  
  INTEGER as arapPortZoneAccess  
  DisplayString as arapPortZoneName  
  INTEGER as arapPortMaxConnectTime  
  INTEGER as arapPortGuestLoginsOk  
  INTEGER as arapPortTimeConnected  
  INTEGER as arapPortTimeRemaining  

DialogStatus  
INTEGER none(1), fileTooLarge(2), notImageFile(3), notExecutableFile(4), badFileData(5), deviceWriteProtected(6), operationTimeout(7), remoteFileNotFound(8), remoteFileAccessViolation(9), protocolError(10), fileSystemError(11), temporaryResourceConflict(12), success(13)    

ActiveEntry  
SEQUENCE    
  AddressType as activeIdentificationType  
  OCTET STRING as activeIdentification  
  INTEGER as activeFunction  
  INTEGER as activeSoftwareVersionType  
  OCTET STRING as activeSoftwareVersion  
  INTEGER as activeParameterVersion  
  INTEGER as activeCurrentSequence  
  INTEGER as activeBytesRemaining  
  DisplayString as activeFile  
  DialogStatus as activeStatus  
  INTEGER as activeState  

ClientEntry  
SEQUENCE    
  AddressType as clientIdentificationType  
  OCTET STRING as clientIdentification  
  INTEGER as clientEntryStatus  
  DisplayString as clientName  
  DisplayString as clientLoadFile  
  DisplayString as clientDiagnosticFile  
  INTEGER as clientLoadService  
  INTEGER as clientDumpService  

NamedEntry  
SEQUENCE    
  AddressType as namedIdentificationType  
  OCTET STRING as namedIdentification  
  INTEGER as namedEntryStatus  
  DisplayString as namedName  
  DisplayString as namedLoadFile  
  DisplayString as namedDiagnosticFile  
  INTEGER as namedLoadService  
  INTEGER as namedDumpService  

XEventEntry  
SEQUENCE    
  INTEGER as xEventIndex  
  DisplayString as xEventText  

DeviceEntry  
SEQUENCE    
  INTEGER as deviceIndex  
  DisplayString as deviceName  
  DisplayString as deviceDescr  
  INTEGER as deviceOperation  
  INTEGER as deviceFormat  
  INTEGER as deviceProtection  
  INTEGER as deviceFormatMedium  
  INTEGER as deviceGetFile  
  AddressType as deviceGetFileHostIdentificationType  
  OCTET STRING as deviceGetFileHostIdentification  
  DisplayString as deviceGetFileName  
  INTEGER as deviceGetFileArea  
  INTEGER as deviceFormatOption  
  INTEGER as deviceFormatRedundantParams  
  DialogStatus as devicePreviousStatus  

DumpFileEntry  
SEQUENCE    
  AddressType as dumpFileIdentificationType  
  OCTET STRING as dumpFileIdentification  
  INTEGER as dumpFileEntryStatus  
  DateTime as dumpFileCreation  
  INTEGER as dumpFileSize  

LoadFileEntry  
SEQUENCE    
  DisplayString as loadFileName  
  DateTime as loadFileCreation  
  INTEGER as loadFileSize  
  INTEGER as loadFileSoftwareVersionType  
  OCTET STRING as loadFileSoftwareVersion  

ParamFileEntry  
SEQUENCE    
  AddressType as paramFileIdentificationType  
  OCTET STRING as paramFileIdentification  
  INTEGER as paramFileEntryStatus  
  DateTime as paramFileWrite  
  INTEGER as paramFileSize  
  INTEGER as paramFileParameterVersion  

NetworkType  
INTEGER unknown(1), other(2), ethernet(3), tokenRing(4), fddi(5), wan(6), ethernetRepeater(7), tokenRingConcentrator(8), fddiConcentrator(9), atm(10), isdn(11), switchplane(12), switchedEthernet(13)    

SerialNumber  
OCTET STRING SIZE(0..6)    

Letter  
INTEGER a(1), b(2), c(3), d(4), e(5), f(6), g(7), h(8), i(9), j(10), k(11), l(12), m(13), n(14), o(15), p(16), q(17), r(18), s(19), t(20), u(21), v(22), w(23), x(24), y(25), z(26)    

SegmentEntry  
SEQUENCE    
  NetworkType as segmentType  
  Letter as segmentIndex  

PortEntry  
SEQUENCE    
  NetworkType as portType  
  INTEGER as portIndex  

ControllerEntry  
SEQUENCE    
  NetworkType as controllerType  
  INTEGER as controllerIndex  
  OBJECT IDENTIFIER as controllerNetwork  

InterfaceEntry  
SEQUENCE    
  INTEGER as interfaceIndex  
  OBJECT IDENTIFIER as interfaceNetwork  

SlotBootControlEntry  
SEQUENCE    
  INTEGER as slotBootControlSlot  
  INTEGER as slotBootControlIndex  
  INTEGER as slotBootControlStatus  
  OBJECT IDENTIFIER as slotBootControlController  
  OBJECT IDENTIFIER as slotBootControlNetwork  
  DisplayString as slotBootControlMopFile  
  DisplayString as slotBootControlInternetFile  
  IpAddress as slotBootControlInternetAddress  
  IpAddress as slotBootControlInternetServer  
  IpAddress as slotBootControlInternetGateway  
  DisplayString as slotBootControlInternetDelimiter  

SlotBootControlFlagEntry  
SEQUENCE    
  INTEGER as slotBootControlFlagLoadBootpTftp  
  INTEGER as slotBootControlFlagParamBootpTftp  
  INTEGER as slotBootControlFlagDumpBootpTftp  
  INTEGER as slotBootControlFlagLoadTftpDirect  
  INTEGER as slotBootControlFlagParamTftpDirect  
  INTEGER as slotBootControlFlagDumpTftpDirect  
  INTEGER as slotBootControlFlagLoadLocal  
  INTEGER as slotBootControlFlagParamLocal  
  INTEGER as slotBootControlFlagDumpLocal  
  INTEGER as slotBootControlFlagLoadMop  
  INTEGER as slotBootControlFlagParamMop  
  INTEGER as slotBootControlFlagDumpMop  
  INTEGER as slotBootControlFlagLoadXmop  
  INTEGER as slotBootControlFlagParamXmop  
  INTEGER as slotBootControlFlagDumpXmop  
  INTEGER as slotBootControlFlagLoadRarpTftp  
  INTEGER as slotBootControlFlagParamRarpTftp  
  INTEGER as slotBootControlFlagDumpRarpTftp  

SlotBootControlStorageEntry  
SEQUENCE    
  INTEGER as slotBootControlStorageClientSlot  
  INTEGER as slotBootControlStorageServerSlot  
  INTEGER as slotBootControlStorageStatus  
  Counter as slotBootControlStorageFailures  

SlotEntry  
SEQUENCE    
  INTEGER as slotIndex  
  INTEGER as slotAdminAction  
  INTEGER as slotOperStatus  
  Gauge as slotSecondsSinceReset  
  HardwareType as slotHardwareType  
  SerialNumber as slotHardwareSerialNumber  
  INTEGER as slotHardwareRevision  
  IOType as slotIOCardType  
  SerialNumber as slotIOCardSerialNumber  
  INTEGER as slotIOCardOperStatus  
  INTEGER as slotBootstrapFirmwareRevision  
  INTEGER as slotElementalFirmwareRevision  
  INTEGER as slotMemorySize  
  Gauge as slotLedNumber  
  OCTET STRING as slotLedStatus  
  MacAddress as slotBase802Address  
  IpAddress as slotIpAddress  
  INTEGER as slotPlus5Status  
  INTEGER as slotPlus12Status  
  INTEGER as slotMinus12Status  
  Gauge as slotPlus5Watts  
  Gauge as slotPlus12Watts  
  Gauge as slotMinus12Watts  
  INTEGER as slotIOCardHardwareVersion  
  INTEGER as slotRestoreNVS  
  INTEGER as slotDefaultNVS  

SlotBootEntry  
SEQUENCE    
  INTEGER as slotBootIndex  
  INTEGER as slotBootIfIndex  
  OBJECT IDENTIFIER as slotBootNetwork  
  INTEGER as slotBootProtocol  
  MacAddress as slotBoot802Address  
  AddressType as slotBootAddressType  
  OCTET STRING as slotBootAddress  
  AddressType as slotBootServerAddressType  
  OCTET STRING as slotBootServerAddress  
  IpAddress as slotBootGatewayAddress  
  DisplayString as slotBootFileName  
  Gauge as slotBootBlockNumber  
  OCTET STRING as slotBootCrashCode  

SlotControllerEntry  
SEQUENCE    
  NetworkType as slotControllerType  
  INTEGER as slotControllerIndex  
  OBJECT IDENTIFIER as slotControllerNetwork  

PowerSupplyEntry  
SEQUENCE    
  INTEGER as powerSupplyIndex  
  INTEGER as powerSupplyAdminAction  
  INTEGER as powerSupplyFirmwareVersion  
  INTEGER as powerSupplyRedundancyStatus  
  INTEGER as powerSupplyPlus5Status  
  INTEGER as powerSupplyPlus12Status  
  INTEGER as powerSupplyMinus12Status  
  INTEGER as powerSupplyThermalWarningStatus  
  INTEGER as powerSupplyThermalShutdownStatus  
  INTEGER as powerSupplyFanStatus  
  INTEGER as powerSupplyHardwareInhibitStatus  
  INTEGER as powerSupplyPlus5History  
  INTEGER as powerSupplyPlus12History  
  INTEGER as powerSupplyMinus12History  
  INTEGER as powerSupplyThermalWarningHistory  
  INTEGER as powerSupplyThermalShutdownHistory  
  INTEGER as powerSupplyFanHistory  
  INTEGER as powerSupplyHardwareInhibitHistory  
  Gauge as powerSupplyPlus5Volts  
  Gauge as powerSupplyPlus12Volts  
  Gauge as powerSupplyMinus12Volts  
  Gauge as powerSupplyWatts  
  Gauge as powerSupplyWattsMax  
  Gauge as powerSupplyChassisWatts  
  Gauge as powerSupplyChassisWattsMax  
  INTEGER as powerSupplyHardwareType  

FirmwareUpdateEntry  
SEQUENCE    
  INTEGER as firmwareUpdateSlotIndex  
  DisplayString as firmwareUpdateDefaultFileName  
  DisplayString as firmwareUpdateFileName  
  INTEGER as firmwareUpdateStatus  
  INTEGER as firmwareUpdateState  
  INTEGER as firmwareUpdateCompletionStatus  
  INTEGER as firmwareUpdateMethod  

BasicPortEntry  
SEQUENCE    
  INTEGER as basicPortIndex  
  INTEGER as basicPortDefaultDestAction  
  INTEGER as basicPortDefaultDestProtocol  
  DisplayString as basicPortDefaultDestName  
  DisplayString as basicPortDefaultDestLATNodeName  
  DisplayString as basicPortDefaultDestLATPortName  
  INTEGER as basicPortAutoConnect  
  INTEGER as basicPortAutoLogin  
  INTEGER as basicPortBroadcast  
  INTEGER as basicPortConnectResume  
  INTEGER as basicPortDialup  
  INTEGER as basicPortIdleTimeout  
  INTEGER as basicPortInactivityLogout  
  INTEGER as basicPortLossNotification  
  INTEGER as basicPortMessageCodes  
  INTEGER as basicPortMultisessions  
  DisplayString as basicPortDefaultUserName  
  INTEGER as basicPortVerification  
  INTEGER as basicPortDefaultProtocol  
  Counter as basicPortLogins  
  Counter as basicPortRemoteSessions  
  Counter as basicPortIdleTimeouts  
  INTEGER as basicPortStatus  
  INTEGER as basicPortLastInCharacter  
  INTEGER as basicPortLastOutCharacter  
  DisplayString as basicPortActiveUserName  
  INTEGER as basicPortDefaultSessionMode  
  INTEGER as basicPortZero  
  TimeTicks as basicPortZeroTime  
  INTEGER as basicPortUnixCommands  
  INTEGER as basicPortSessionMode  
  INTEGER as basicPortRemoteDisconnectNotify  
  INTEGER as basicPortDefaultDestControlled  
  OCTET STRING as basicPortControlledPortLogin  
  OCTET STRING as basicPortControlledPortLogout  
  OCTET STRING as basicPortControlledSessionInitialize  
  OCTET STRING as basicPortControlledSessionTerminate  
  INTEGER as basicPortRloginTransparentMode  
  INTEGER as basicPortLoginDuration  
  INTEGER as basicPortOutboundSecurity  
  INTEGER as basicPortXonTimer  
  INTEGER as basicPortDefaultDedicatedSessionType  
  INTEGER as basicPortIdleTimeReceive  
  INTEGER as basicPortIdleTimeTransmit  
  INTEGER as basicPortZeroDisconnectSession  
  INTEGER as basicPortConsolePort  
  DisplayString as basicPortLoginPassword  
  INTEGER as basicPortSensor  
  INTEGER as basicPortAlarmControl  
  INTEGER as basicPortCommandLogging  
  OCTET STRING as basicPortBreakSequence  
  INTEGER as basicPortTl1Mode  
  INTEGER as basicPortTl1Console  
  INTEGER as basicPortFallThrough  
  INTEGER as basicPortCommandLoggingSuppressControlCharacters  
  INTEGER as basicPortDataLogging  
  INTEGER as basicPortDataLoggingSuppressControlCharacters  
  INTEGER as basicPortOnboardSecurity  
  INTEGER as basicPortFallBack  
  INTEGER as basicPortAlarmMaster  
  INTEGER as basicPortAlarmMasterAccounting  
  INTEGER as basicPortAlarmMasterAudibleAlarm  
  INTEGER as basicPortAlarmMasterFixTime  
  DisplayString as basicPortAlarmMasterLcdDisplayString  
  INTEGER as basicPortAlarmMasterReboot  
  IpAddress as basicPortAlarmMasterUpdateFirmwareHost  
  DisplayString as basicPortAlarmMasterUpdateFirmwareFileName  
  INTEGER as basicPortAlarmMasterUpdateFirmware  
  INTEGER as basicPortAlarmMasterStatus  
  INTEGER as basicPortAlarmMasterFaultSeverity  
  INTEGER as basicPortPowerMaster  
  INTEGER as basicPortPowerMasterTimeDelay  
  INTEGER as basicPortPowerMasterSwitch  
  DisplayString as basicPortPowerMasterModel  
  DisplayString as basicPortPowerMasterSerialNumber  
  DisplayString as basicPortPowerMasterFirmware  
  INTEGER as basicPortLockout  
  INTEGER as basicPortAsciiToTrapTranslation  
  INTEGER as basicPortAsciiToTrapTranslationTrapSeverity  
  Counter as basicPortAsciiToTrapTranslationMessages  
  DisplayString as basicPortAsciiToTrapTranslationLastMessage  
  INTEGER as basicPortPowerMasterAlarmSeverity  
  INTEGER as basicPortPowerMasterDeviceStatus  
  INTEGER as basicPortBuffering  
  INTEGER as basicPortLogFacilityLevel  
  INTEGER as basicPortPppDialBackup  
  DisplayString as basicPortPppDialBackupNumber  
  INTEGER as basicPortPppDialBackupRedialTimer  
  INTEGER as basicPortPppDialBackupRedialRetries  
  INTEGER as basicPortPppDialBackupDisconnectTimer  
  IpAddress as basicPortPppDialBackupLocalAddress  
  IpAddress as basicPortPppDialBackupDestinationAddress  
  INTEGER as basicPortPppDialBackupAddresses  

BasicSerialPortEntry  
SEQUENCE    
  INTEGER as basicSerialPortIndex  
  INTEGER as basicSerialPortBreak  
  INTEGER as basicSerialPortInterrupts  
  INTEGER as basicSerialPortNoLoss  
  INTEGER as basicSerialPortPause  
  DisplayString as basicSerialPortPrompt  
  INTEGER as basicSerialPortTerminalType  
  INTEGER as basicSerialPortTypeaheadLimit  
  INTEGER as basicSerialPortBackwardSwitch  
  INTEGER as basicSerialPortForwardSwitch  
  INTEGER as basicSerialPortLocalSwitch  
  INTEGER as basicSerialPortModemControl  
  INTEGER as basicSerialPortSignalCheck  
  INTEGER as basicSerialPortDSRLogout  
  INTEGER as basicSerialPortDSRObserve  
  INTEGER as basicSerialPortDCDTimeout  
  INTEGER as basicSerialPortDTRAssert  
  INTEGER as basicSerialPortLimitedCommands  
  INTEGER as basicSerialPortLimitedView  
  INTEGER as basicSerialPortPassword  
  INTEGER as basicSerialPortLineEditor  
  INTEGER as basicSerialPortLineEditorBackspace  
  INTEGER as basicSerialPortLineEditorBeginning  
  INTEGER as basicSerialPortLineEditorCancel  
  INTEGER as basicSerialPortLineEditorDeleteBeginning  
  INTEGER as basicSerialPortLineEditorDeleteLine  
  INTEGER as basicSerialPortLineEditorEnd  
  INTEGER as basicSerialPortLineEditorForward  
  INTEGER as basicSerialPortLineEditorInsertToggle  
  INTEGER as basicSerialPortLineEditorNextLine  
  INTEGER as basicSerialPortLineEditorPreviousLine  
  INTEGER as basicSerialPortLineEditorQuotingCharacter  
  INTEGER as basicSerialPortLineEditorRedisplay  
  INTEGER as basicSerialPortQuadartReceiveDiscard  
  OCTET STRING as basicSerialPortAPDProtocols  
  INTEGER as basicSerialPortAPDTimeout  
  OCTET STRING as basicSerialPortAPDDefaultProtocol  
  INTEGER as basicSerialPortUsernameCharSet  
  INTEGER as basicSerialPortAutoHangup  
  INTEGER as basicSerialPortCommandSize  
  INTEGER as basicSerialPortAutoProtocolDetectPrompt  
  DisplayString as basicSerialPortUsernamePrompt  
  DisplayString as basicSerialPortPasswordPrompt  
  INTEGER as basicSerialPortAutoProtocolDetectSecurityInteractiveOnly  
  DisplayString as basicSerialPortDedicatedUserData  
  INTEGER as basicSerialPortIpAutoDiscovery  
  DisplayString as basicSerialPortDedicatedKickStartData  
  INTEGER as basicSerialPortBreakLength  
  INTEGER as basicSerialPortRotaryRoundRobin  
  INTEGER as basicSerialPortWelcomeBeforeAuthentication  
  INTEGER as basicSerialPortGatewayAutoDiscovery  
  INTEGER as basicSerialPortSubnetAutoDiscovery  
  INTEGER as basicSerialPortRaiseLowerDtr  
  INTEGER as basicSerialPortRaiseControlDtr  
  INTEGER as basicSerialPortIpConfigureBootp  

BasicPortSessEntry  
SEQUENCE    
  INTEGER as basicPortPortIndex  
  INTEGER as basicPortSessIndex  
  INTEGER as basicSessControlled  

BasicContactClosureOrAlarmInputEntry  
SEQUENCE    
  INTEGER as basicContactClosureOrAlarmInputValue  
  DisplayString as basicContactClosureOrAlarmInputName  
  INTEGER as basicContactClosureOrAlarmInputTrapEnable  
  INTEGER as basicContactClosureOrAlarmInputFaultSeverity  
  INTEGER as basicContactClosureOrAlarmInputFaultState  
  INTEGER as basicContactClosureOrAlarmInputStatus  
  DisplayString as basicContactClosureOrAlarmInputZone  
  DisplayString as basicContactClosureOrAlarmInputRelatedEquipment  
  DisplayString as basicContactClosureOrAlarmInputSiteId  
  INTEGER as basicContactClosureOrAlarmInputIndex  
  DisplayString as basicContactClosureOrAlarmInputManufacturer  
  DisplayString as basicContactClosureOrAlarmInputModel  

BasicPowerOutletEntry  
SEQUENCE    
  INTEGER as basicPowerOutletOnOff  
  INTEGER as basicPowerOutletReboot  
  DisplayString as basicPowerOutletName  
  INTEGER as basicPowerOutletRedundant  
  DisplayString as basicPowerOutletConsoleName  
  INTEGER as basicPowerOutletHighCurrent  
  INTEGER as basicPowerOutletIndex  

BasicTemperatureSensorEntry  
SEQUENCE    
  INTEGER as basicTempTrapHighThreshold  
  INTEGER as basicTempTrapLowThreshold  
  INTEGER as basicTemperatureSensor  
  INTEGER as basicTemperatureValue  
  INTEGER as basicTemperatureAlarmSeverity  
  INTEGER as basicTemperatureAlarmStatus  
  DisplayString as basicTemperatureHumiditySensorName  
  INTEGER as basicTemperatureSensorIndex  

BasicHumiditySensorEntry  
SEQUENCE    
  INTEGER as basicHumidityTrapHighThreshold  
  INTEGER as basicHumidityTrapLowThreshold  
  INTEGER as basicHumiditySensor  
  INTEGER as basicHumidityValue  
  INTEGER as basicHumidityAlarmSeverity  
  INTEGER as basicHumidityAlarmStatus  
  INTEGER as basicHumiditySensorIndex  

BasicControlSignalEntry  
SEQUENCE    
  INTEGER as basicControlSignalValue  
  INTEGER as basicControlSignalIndex  

BasicControlOutputEntry  
SEQUENCE    
  INTEGER as basicControlOutputSignalDtrRts  
  DisplayString as basicControlOutputName  
  INTEGER as basicControlOutputIndex  

BasicPortTrapEntry  
SEQUENCE    
  INTEGER as basicPortTrapIndex  
  INTEGER as basicPortSignalName  
  INTEGER as basicPortTrapStatus  

BasicAlarmMasterInputEntry  
SEQUENCE    
  INTEGER as basicAlarmMasterInputPort  
  INTEGER as basicAlarmMasterInputSlot  
  INTEGER as basicAlarmMasterInputPoint  
  DisplayString as basicAlarmMasterInputName  
  INTEGER as basicAlarmMasterInputTrapEnable  
  INTEGER as basicAlarmMasterControlOutputSignal  
  INTEGER as basicAlarmMasterInputEnable  
  INTEGER as basicAlarmMasterInputDebounceInterval  
  INTEGER as basicAlarmMasterInputFaultSeverity  
  INTEGER as basicAlarmMasterInputFaultState  
  INTEGER as basicAlarmMasterInputStatus  
  INTEGER as basicAlarmMasterInputValue  
  INTEGER as basicAlarmMasterDisplay  
  DisplayString as basicAlarmMasterInputZone  
  DisplayString as basicAlarmMasterInputRelatedEquipment  
  DisplayString as basicAlarmMasterInputSiteId  
  DisplayString as basicAlarmMasterInputManufacturer  
  DisplayString as basicAlarmMasterInputModel  

BasicPowerMasterOutletEntry  
SEQUENCE    
  INTEGER as basicPowerMasterPortIndex  
  INTEGER as basicPowerMasterOutletIndex  
  DisplayString as basicPowerMasterOutletName  
  INTEGER as basicPowerMasterOutletState  
  DisplayString as basicPowerMasterOutletAmperageStatus  

BasicControlOutputRelayEntry  
SEQUENCE    
  INTEGER as basicControlOutputRelayIndex  
  DisplayString as basicControlOutputRelayName  
  INTEGER as basicControlOutputRelayState  
  INTEGER as basicControlOutputRelayStatus  

QueueEntry  
SEQUENCE    
  INTEGER as queueJob  
  INTEGER as queueStatus  
  DisplayString as queueSourceName  
  DisplayString as queueServiceName  
  INTEGER as queueServicePortIndex  
  DisplayString as queueServicePortName  

QueuePortEntry  
SEQUENCE    
  INTEGER as queuePortIndex  
  INTEGER as queuePortQueuing  



NetLoginServerEntry  
SEQUENCE    
  DisplayString as netLoginServerName  
  INTEGER as netLoginServerStatus  
  DisplayString as netLoginServerPath  
  DisplayString as netLoginServerSeparator  

NetLoginPortEntry  
SEQUENCE    
  INTEGER as netLoginPortIndex  
  INTEGER as netLoginPortScriptUse  
  INTEGER as netLoginPortScriptEcho  
  AddressType as netLoginPortLoaderAddressType  
  OCTET STRING as netLoginPortLoaderAddress  
  DisplayString as netLoginPortLoaderFile  
  DisplayString as netLoginPortExecuteFile  

DialPortEntry  
SEQUENCE    
  INTEGER as dialPortIndex  
  INTEGER as dialPortDialback  
  INTEGER as dialPortDialbackTimeout  
  INTEGER as dialPortDialout  
  INTEGER as dialPortDialbackNoUsername  

SessionLogEntry  
SEQUENCE    
  INTEGER as sessionLogIndex  
  INTEGER as sessionLogConnectionID  
  INTEGER as sessionLogPort  
  INTEGER as sessionLogEvent  
  INTEGER as sessionLogEventDetail  
  DisplayString as sessionLogUserName  
  DisplayString as sessionLogRemoteName  
  DateTime as sessionLogConnectTime  
  DateTime as sessionLogDisconnectTime  
  Counter as sessionLogInCharacters  
  Counter as sessionLogOutCharacters  
  INTEGER as sessionLogVerboseEvent  
  INTEGER as sessionLogX25Direction  
  DisplayString as sessionLogVerboseMessage  
  OCTET STRING as sessionLogX25CallerAddress  
  OCTET STRING as sessionLogX25CalledAddress  
  INTEGER as sessionLogX25DisconnectCause  
  INTEGER as sessionLogX25DisconnectDiagnostic  

CclParsedScriptEntry  
SEQUENCE    
  DisplayString as cclScriptName  
  INTEGER as cclScriptControl  

CclPortEntry  
SEQUENCE    
  DisplayString as cclPortCclName  
  INTEGER as cclPortModemAudible  

BroadcastGroupEntry  
SEQUENCE    
  INTEGER as broadcastGroupIndex  
  INTEGER as broadcastGroupStatus  
  INTEGER as broadcastGroupMaster  
  OCTET STRING as broadcastGroupSlaves  
  OCTET STRING as broadcastGroupSlavesBroadcastOnly  
  INTEGER as broadcastGroupSlaveTcpPort  
  INTEGER as broadcastGroupSlaveTcpBroadcastOnly  

PingHostsEntry  
SEQUENCE    
  INTEGER as icmpPingHostIndex  
  IpAddress as icmpPingHostAddress  
  DisplayString as icmpPingHostDescription  
  INTEGER as icmpPingHostNotificationType  
  INTEGER as icmpPingHostPollingInterval  
  INTEGER as icmpPingHostMaximumRetries  
  INTEGER as icmpPingHostTrapSeverityLevel  
  INTEGER as icmpPingHostStatus  

PhivCircuitEntry  
SEQUENCE    
  INTEGER as xPhivCircuitIndex  
  INTEGER as phivCircuitRoutingTimer  
  INTEGER as phivCircuitOperCost  
  Counter as phivCircuitErrors  
  INTEGER as phivCircuitLastError  
  DateTime as phivCircuitLastErrorTime  
  OCTET STRING as phivCircuitLastErrorData  
  INTEGER as phivCircuitProtocolPriority  
  INTEGER as phivCircuitRoutingPriority  

PhivCircuitImportEntry  
SEQUENCE    
  INTEGER as phivCircuitImportIf  
  PhivAddr as phivCircuitImportAddr  
  PhivAddr as phivCircuitImportMask  
  INTEGER as phivCircuitImportAction  
  INTEGER as phivCircuitImportStatus  

PhivCircuitImportAreaEntry  
SEQUENCE    
  INTEGER as phivCircuitImportAreaIf  
  PhivAddr as phivCircuitImportAreaAddr  
  PhivAddr as phivCircuitImportAreaMask  
  INTEGER as phivCircuitImportAreaAction  
  INTEGER as phivCircuitImportAreaStatus  

PhivCircuitExportEntry  
SEQUENCE    
  INTEGER as phivCircuitExportIf  
  PhivAddr as phivCircuitExportAddr  
  PhivAddr as phivCircuitExportMask  
  INTEGER as phivCircuitExportAction  
  INTEGER as phivCircuitExportStatus  

PhivCircuitExportAreaEntry  
SEQUENCE    
  INTEGER as phivCircuitExportAreaIf  
  PhivAddr as phivCircuitExportAreaAddr  
  PhivAddr as phivCircuitExportAreaMask  
  INTEGER as phivCircuitExportAreaAction  
  INTEGER as phivCircuitExportAreaStatus  

PhivCircuitFilterEntry  
SEQUENCE    
  INTEGER as phivCircuitFilterIf  
  PhivAddr as phivCircuitFilterDstAddr  
  PhivAddr as phivCircuitFilterDstMask  
  PhivAddr as phivCircuitFilterSrcAddr  
  PhivAddr as phivCircuitFilterSrcMask  
  INTEGER as phivCircuitFilterAction  
  INTEGER as phivCircuitFilterStatus  

PhivTrafficEntry  
SEQUENCE    
  INTEGER as phivTrafficIndex  
  INTEGER as phivTrafficPercent  
  PhivAddr as phivTrafficDst  
  PhivAddr as phivTrafficSrc  
  INTEGER as phivTrafficIf  

EtherEntry  
SEQUENCE    
  INTEGER as etherIndex  
  Counter as etherAlignmentErrors  
  Counter as etherFCSErrors  

EtherTxEntry  
SEQUENCE    
  INTEGER as etherTxIndex  
  Counter as etherTxSingleCollisionFrames  
  Counter as etherTxMultipleCollisionFrames  

EtherMulticastEntry  
SEQUENCE    
  INTEGER as etherMulticastIndex  
  Counter as etherMulticastBytesIn  
  Counter as etherMulticastBytesOut  

EtherXTxEntry  
SEQUENCE    
  INTEGER as etherXTxIndex  
  Counter as etherXTxExcessiveCollisions  

IpGenAdExtEntry  
SEQUENCE    
  INTEGER as ipGenAdEntExtType  
  IpAddress as ipGenAdEntExtBroadcast  

TcpPortEntry  
SEQUENCE    
  INTEGER as tcpPortIndex  
  INTEGER as tcpPortConnectByAddress  
  INTEGER as tcpPortWindowSize  
  INTEGER as tcpPortKeepAliveLimit  

GetClientEntry  
SEQUENCE    
  INTEGER as getClientIndex  
  INTEGER as getClientEntryStatus  
  AddressType as getClientAddressType  
  OCTET STRING as getClientAddress  

SetClientEntry  
SEQUENCE    
  INTEGER as setClientIndex  
  INTEGER as setClientEntryStatus  
  AddressType as setClientAddressType  
  OCTET STRING as setClientAddress  

TrapClientEntry  
SEQUENCE    
  INTEGER as trapClientIndex  
  INTEGER as trapClientEntryStatus  
  AddressType as trapClientAddressType  
  OCTET STRING as trapClientAddress  

NameEntry  
SEQUENCE    
  DisplayString as nameName  
  IpAddress as nameAddress  
  INTEGER as nameStatus  
  INTEGER as nameSource  
  INTEGER as nameTtl  

SlipEntry  
SEQUENCE    
  INTEGER as slipIndex  
  INTEGER as slipState  
  IpAddress as slipLocalAddress  
  IpAddress as slipRemoteAddress  
  IpAddress as slipMask  
  Counter as slipPortPacketsReceived  
  Counter as slipPortPacketsSent  
  Counter as slipPortPacketsDiscarded  
  Counter as slipPortPacketLengthErrors  
  Counter as slipPortPacketChecksumErrors  
  Counter as slipNetworkPacketsReceived  
  Counter as slipNetworkPacketsSent  
  Counter as slipNetworkPacketsDiscarded  

TelnetPortEntry  
SEQUENCE    
  INTEGER as telnetPortIndex  
  INTEGER as telnetPortIncomingTcpPort  
  INTEGER as telnetPortOutgoingTcpPort  
  INTEGER as telnetPortNewlineTranslation  
  DisplayString as telnetPortTerminalType  
  INTEGER as telnetPortEorReflection  
  INTEGER as telnetPortBinaryMode  
  INTEGER as telnetPortSendLocation  
  DisplayString as telnetPortClientLocation  
  INTEGER as telnetPortPassiveSendLocation  

TelnetSerialPortEntry  
SEQUENCE    
  INTEGER as telnetSerialPortIndex  
  INTEGER as telnetSerialPortOptionDisplay  
  INTEGER as telnetSerialPortCsiEscape  
  INTEGER as telnetSerialPortEchoMode  
  INTEGER as telnetSerialPortNewlineMode  
  INTEGER as telnetSerialPortTransmitMode  
  INTEGER as telnetSerialPortTransmitCharacterTimes  
  INTEGER as telnetSerialPortAbortOutputCharacter  
  INTEGER as telnetSerialPortAttentionCharacter  
  INTEGER as telnetSerialPortEraseKeyCharacter  
  INTEGER as telnetSerialPortEraseLineCharacter  
  INTEGER as telnetSerialPortInterruptCharacter  
  INTEGER as telnetSerialPortQueryCharacter  
  INTEGER as telnetSerialPortSynchronizeCharacter  
  INTEGER as telnetSerialPortUrgentBreak  
  INTEGER as telnetSerialPortRs491  
  INTEGER as telnetSerialPortTransmitBufferedTime  
  INTEGER as telnetSerialPortInterpretInterruptAsBreak  
  INTEGER as telnetSerialPortPass8d  
  INTEGER as telnetSerialPortComControlClient  
  INTEGER as telnetSerialPortComControlServer  
  INTEGER as telnetSerialPortComControlServerRaisesDtr  
  INTEGER as telnetSerialPortComControlClientTogglesDtr  

Tn3270DeviceEntry  
SEQUENCE    
  DisplayString as tn3270DeviceName  
  INTEGER as tn3270DeviceStatus  
  DisplayString as tn3270DeviceType  
  INTEGER as tn3270Device3278Model  
  INTEGER as tn3270DeviceKeyNumber  
  INTEGER as tn3270DeviceScreenNumber  

Tn3270KeyEntry  
SEQUENCE    
  DisplayString as tn3270KeyDeviceName  
  INTEGER as tn3270KeyName  
  INTEGER as tn3270KeyStatus  
  OCTET STRING as tn3270KeyCharacterSequence  
  DisplayString as tn3270KeyDescription  

Tn3270ScreenEntry  
SEQUENCE    
  DisplayString as tn3270ScreenDeviceName  
  INTEGER as tn3270ScreenActionName  
  INTEGER as tn3270ScreenStatus  
  OCTET STRING as tn3270ScreenCharacterSequence  

Tn3270LanguageEntry  
SEQUENCE    
  DisplayString as tn3270LanguageName  
  INTEGER as tn3270LanguageStatus  

EToALanguageEntry  
SEQUENCE    
  DisplayString as eToALanguageName  
  INTEGER as eToAOffset  
  INTEGER as eToAValue  

AToELanguageEntry  
SEQUENCE    
  DisplayString as aToELanguageName  
  INTEGER as aToEOffset  
  INTEGER as aToEValue  

Tn3270PortEntry  
SEQUENCE    
  INTEGER as tn3270PortIndex  
  DisplayString as tn3270PortDeviceName  
  DisplayString as tn3270PortLanguageName  
  INTEGER as tn3270PortExtendedAttributes  
  INTEGER as tn3270PortEorNegotiation  
  INTEGER as tn3270PortErrorLock  
  INTEGER as tn3270PortPrinterPort  
  INTEGER as tn3270PortOutgoingTcpPort  
  INTEGER as tn3270PortSpaceInsert  
  INTEGER as tn3270PortTypeAhead  
  INTEGER as tn3270PrefixKeyMap  
  INTEGER as tn3270PortScanner  

KerbPortEntry  
SEQUENCE    
  INTEGER as kerbPortIndex  
  INTEGER as kerbPortStatus  

PsPortEntry  
SEQUENCE    
  INTEGER as psPortIndex  
  INTEGER as psPortDefaultInboundAccess  
  INTEGER as psPortDefaultOutboundAccess  
  INTEGER as psClrInternetSecurity  

PsEntry  
SEQUENCE    
  INTEGER as psEntryIndex  
  INTEGER as psEntryStatus  
  IpAddress as psEntryAddress  
  IpAddress as psEntryMask  
  INTEGER as psEntryAccess  
  INTEGER as psEntryDirection  
  OCTET STRING as psEntryPortMap  

XremotePortEntry  
SEQUENCE    
  INTEGER as xremotePortIndex  
  INTEGER as xremotePortXremote  
  INTEGER as xremotePortXdmQuery  
  DisplayString as xremotePortXdmHost  

RotaryEntry  
SEQUENCE    
  IpAddress as rotaryAddress  
  INTEGER as rotaryStatus  
  OCTET STRING as rotaryPortMap  

EgpNbrEntry  
SEQUENCE    
  IpAddress as egpNbrAddr  
  INTEGER as egpNbrIntervalDead  
  INTEGER as egpNbrStatus  

OspfIfMtrcEntry  
SEQUENCE    
  IpAddress as ospfIfMtrcIpAddress  
  INTEGER as ospfIfMtrcAddressLessIf  
  INTEGER as ospfIfMtrcTos  
  INTEGER as ospfIfMtrcCostActual  

OspfXIfEntry  
SEQUENCE    
  IpAddress as ospfXIfIpAddress  
  INTEGER as ospfXIfAddressLessIf  
  INTEGER as ospfXIfTypeActual  
  INTEGER as ospfXIfStatus  

OspfXAreaEntry  
SEQUENCE    
  IpAddress as ospfXAreaId  
  INTEGER as ospfXAreaStatus  

IpAdExtEntry  
SEQUENCE    
  IpAddress as ipAdEntExtAddress  
  INTEGER as ipAdEntExtProxyArp  
  INTEGER as ipAdEntExtRip  

IpRouterIfEntry  
SEQUENCE    
  INTEGER as ipRouterIfIndex  
  INTEGER as ipRouterIfProtocolPriority  
  INTEGER as ipRouterIfMTU  
  INTEGER as ipRouterIfRDP  
  Counter as ipRouterIfArpPacketsIn  
  Counter as ipRouterIfArpPacketsOut  
  Counter as ipRouterIfPacketsIn  
  Counter as ipRouterIfPacketsOut  
  Counter as ipRouterIfForwardsIn  
  Counter as ipRouterIfForwardsOut  

IpTrafficEntry  
SEQUENCE    
  INTEGER as ipTrafficIndex  
  INTEGER as ipTrafficPercent  
  IpAddress as ipTrafficDstAddr  
  IpAddress as ipTrafficSrcAddr  
  INTEGER as ipTrafficProtocol  
  INTEGER as ipTrafficDstPort  
  INTEGER as ipTrafficSrcPort  
  INTEGER as ipTrafficIf  

XIpNetToMediaEntry  
SEQUENCE    
  INTEGER as xIpNetToMediaCircuit  
  INTEGER as xIpNetToMediaReverseArp  

UdpBcstServerEntry  
SEQUENCE    
  IpAddress as udpBcstServerAddress  
  INTEGER as udpBcstServerStatus  

UdpBcstPortEntry  
SEQUENCE    
  INTEGER as udpBcstPort  
  INTEGER as udpBcstPortStatus  

ImpEgpRuleEntry  
SEQUENCE    
  INTEGER as impEgpRuleAs  
  IpAddress as impEgpRuleNetwork  
  INTEGER as impEgpRuleAction  
  INTEGER as impEgpRulePreference  
  INTEGER as impEgpRuleType  
  INTEGER as impEgpRuleMetricAction  
  INTEGER as impEgpRuleMetric  
  INTEGER as impEgpRuleStatus  

ImpOspfRuleEntry  
SEQUENCE    
  IpAddress as impOspfRuleNetwork  
  INTEGER as impOspfRulePreference  
  INTEGER as impOspfRuleStatus  

ImpRipRuleEntry  
SEQUENCE    
  IpAddress as impRipRuleFromIf  
  IpAddress as impRipRuleNetwork  
  INTEGER as impRipRuleAction  
  INTEGER as impRipRulePreference  
  INTEGER as impRipRuleType  
  INTEGER as impRipRuleMetricAction  
  INTEGER as impRipRuleMetric  
  INTEGER as impRipRuleStatus  

ImpIsisRuleEntry  
SEQUENCE    
  IpAddress as impIsisRuleNetwork  
  INTEGER as impIsisRuleAction  
  INTEGER as impIsisRulePreference  
  INTEGER as impIsisRuleType  
  INTEGER as impIsisRuleMetricAction  
  INTEGER as impIsisRuleMetric  
  INTEGER as impIsisRuleStatus  

ExpEgpToEgpRuleEntry  
SEQUENCE    
  INTEGER as expEgpToEgpRuleToAs  
  IpAddress as expEgpToEgpRuleNetwork  
  INTEGER as expEgpToEgpRuleFromAs  
  INTEGER as expEgpToEgpRuleAction  
  INTEGER as expEgpToEgpRuleMetricAction  
  INTEGER as expEgpToEgpRuleMetric  
  INTEGER as expEgpToEgpRuleStatus  

ExpOspfToEgpRuleEntry  
SEQUENCE    
  INTEGER as expOspfToEgpRuleToAs  
  IpAddress as expOspfToEgpRuleNetwork  
  INTEGER as expOspfToEgpRuleFromAs  
  INTEGER as expOspfToEgpRuleAction  
  INTEGER as expOspfToEgpRuleMetricAction  
  INTEGER as expOspfToEgpRuleMetric  
  INTEGER as expOspfToEgpRuleStatus  

ExpStaticToEgpRuleEntry  
SEQUENCE    
  INTEGER as expStaticToEgpRuleToAs  
  IpAddress as expStaticToEgpRuleNetwork  
  INTEGER as expStaticToEgpRuleAction  
  INTEGER as expStaticToEgpRuleMetricAction  
  INTEGER as expStaticToEgpRuleMetric  
  INTEGER as expStaticToEgpRuleStatus  

ExpEgpToOspfRuleEntry  
SEQUENCE    
  IpAddress as expEgpToOspfRuleNetwork  
  INTEGER as expEgpToOspfRuleFromAs  
  INTEGER as expEgpToOspfRuleAction  
  INTEGER as expEgpToOspfRuleStatus  

ExpRipToEgpRuleEntry  
SEQUENCE    
  INTEGER as expRipToEgpRuleToAs  
  IpAddress as expRipToEgpRuleNetwork  
  INTEGER as expRipToEgpRuleAction  
  INTEGER as expRipToEgpRuleMetricAction  
  INTEGER as expRipToEgpRuleMetric  
  INTEGER as expRipToEgpRuleStatus  

ExpRipToOspfRuleEntry  
SEQUENCE    
  IpAddress as expRipToOspfRuleNetwork  
  INTEGER as expRipToOspfRuleAction  
  INTEGER as expRipToOspfRuleStatus  

ExpEgpToRipRuleEntry  
SEQUENCE    
  IpAddress as expEgpToRipRuleToIf  
  IpAddress as expEgpToRipRuleNetwork  
  INTEGER as expEgpToRipRuleFromAs  
  INTEGER as expEgpToRipRuleAction  
  INTEGER as expEgpToRipRuleMetricAction  
  INTEGER as expEgpToRipRuleMetric  
  INTEGER as expEgpToRipRuleStatus  

ExpOspfToRipRuleEntry  
SEQUENCE    
  IpAddress as expOspfToRipRuleToIf  
  IpAddress as expOspfToRipRuleNetwork  
  INTEGER as expOspfToRipRuleFromAs  
  INTEGER as expOspfToRipRuleAction  
  INTEGER as expOspfToRipRuleMetricAction  
  INTEGER as expOspfToRipRuleMetric  
  INTEGER as expOspfToRipRuleStatus  

ExpRipToRipRuleEntry  
SEQUENCE    
  IpAddress as expRipToRipRuleToIf  
  IpAddress as expRipToRipRuleNetwork  
  INTEGER as expRipToRipRuleAction  
  INTEGER as expRipToRipRuleMetricAction  
  INTEGER as expRipToRipRuleMetric  
  INTEGER as expRipToRipRuleStatus  

ExpStaticToRipRuleEntry  
SEQUENCE    
  IpAddress as expStaticToRipRuleToIf  
  IpAddress as expStaticToRipRuleNetwork  
  INTEGER as expStaticToRipRuleAction  
  INTEGER as expStaticToRipRuleMetricAction  
  INTEGER as expStaticToRipRuleMetric  
  INTEGER as expStaticToRipRuleStatus  

ExpIsisToEgpRuleEntry  
SEQUENCE    
  INTEGER as expIsisToEgpRuleToAs  
  IpAddress as expIsisToEgpRuleNetwork  
  INTEGER as expIsisToEgpRuleAction  
  INTEGER as expIsisToEgpRuleMetricAction  
  INTEGER as expIsisToEgpRuleMetric  
  INTEGER as expIsisToEgpRuleStatus  

ExpIsisToOspfRuleEntry  
SEQUENCE    
  IpAddress as expIsisToOspfRuleNetwork  
  INTEGER as expIsisToOspfRuleAction  
  INTEGER as expIsisToOspfRuleStatus  

ExpIsisToRipRuleEntry  
SEQUENCE    
  IpAddress as expIsisToRipRuleToIf  
  IpAddress as expIsisToRipRuleNetwork  
  INTEGER as expIsisToRipRuleAction  
  INTEGER as expIsisToRipRuleMetricAction  
  INTEGER as expIsisToRipRuleMetric  
  INTEGER as expIsisToRipRuleStatus  

ExpEgpToIsisRuleEntry  
SEQUENCE    
  IpAddress as expEgpToIsisRuleNetwork  
  INTEGER as expEgpToIsisRuleFromAs  
  INTEGER as expEgpToIsisRuleAction  
  INTEGER as expEgpToIsisRuleMetricType  
  INTEGER as expEgpToIsisRuleDefaultMetricAction  
  INTEGER as expEgpToIsisRuleDefaultMetric  
  INTEGER as expEgpToIsisRuleDelayMetricAction  
  INTEGER as expEgpToIsisRuleDelayMetric  
  INTEGER as expEgpToIsisRuleErrorMetricAction  
  INTEGER as expEgpToIsisRuleErrorMetric  
  INTEGER as expEgpToIsisRuleExpenseMetricAction  
  INTEGER as expEgpToIsisRuleExpenseMetric  
  INTEGER as expEgpToIsisRuleStatus  

ExpOspfToIsisRuleEntry  
SEQUENCE    
  IpAddress as expOspfToIsisRuleNetwork  
  INTEGER as expOspfToIsisRuleFromAs  
  INTEGER as expOspfToIsisRuleAction  
  INTEGER as expOspfToIsisRuleMetricType  
  INTEGER as expOspfToIsisRuleDefaultMetricAction  
  INTEGER as expOspfToIsisRuleDefaultMetric  
  INTEGER as expOspfToIsisRuleDelayMetricAction  
  INTEGER as expOspfToIsisRuleDelayMetric  
  INTEGER as expOspfToIsisRuleErrorMetricAction  
  INTEGER as expOspfToIsisRuleErrorMetric  
  INTEGER as expOspfToIsisRuleExpenseMetricAction  
  INTEGER as expOspfToIsisRuleExpenseMetric  
  INTEGER as expOspfToIsisRuleStatus  

ExpRipToIsisRuleEntry  
SEQUENCE    
  IpAddress as expRipToIsisRuleNetwork  
  INTEGER as expRipToIsisRuleAction  
  INTEGER as expRipToIsisRuleMetricType  
  INTEGER as expRipToIsisRuleDefaultMetricAction  
  INTEGER as expRipToIsisRuleDefaultMetric  
  INTEGER as expRipToIsisRuleDelayMetricAction  
  INTEGER as expRipToIsisRuleDelayMetric  
  INTEGER as expRipToIsisRuleErrorMetricAction  
  INTEGER as expRipToIsisRuleErrorMetric  
  INTEGER as expRipToIsisRuleExpenseMetricAction  
  INTEGER as expRipToIsisRuleExpenseMetric  
  INTEGER as expRipToIsisRuleStatus  

ExpStaticToIsisRuleEntry  
SEQUENCE    
  IpAddress as expStaticToIsisRuleNetwork  
  INTEGER as expStaticToIsisRuleAction  
  INTEGER as expStaticToIsisRuleMetricType  
  INTEGER as expStaticToIsisRuleDefaultMetricAction  
  INTEGER as expStaticToIsisRuleDefaultMetric  
  INTEGER as expStaticToIsisRuleDelayMetricAction  
  INTEGER as expStaticToIsisRuleDelayMetric  
  INTEGER as expStaticToIsisRuleErrorMetricAction  
  INTEGER as expStaticToIsisRuleErrorMetric  
  INTEGER as expStaticToIsisRuleExpenseMetricAction  
  INTEGER as expStaticToIsisRuleExpenseMetric  
  INTEGER as expStaticToIsisRuleStatus  

IpIfFilterEntry  
SEQUENCE    
  INTEGER as ipIfFilterIndex  
  IpAddress as ipIfFilterDstAddr  
  IpAddress as ipIfFilterDstMask  
  IpAddress as ipIfFilterSrcAddr  
  IpAddress as ipIfFilterSrcMask  
  INTEGER as ipIfFilterProtocol  
  INTEGER as ipIfFilterDstPort  
  INTEGER as ipIfFilterSrcPort  
  INTEGER as ipIfFilterAction  
  INTEGER as ipIfFilterStatus  

IpIfFilter2Entry  
SEQUENCE    
  INTEGER as ipIfFilter2Index  
  IpAddress as ipIfFilter2DstAddr  
  IpAddress as ipIfFilter2DstMask  
  IpAddress as ipIfFilter2SrcAddr  
  IpAddress as ipIfFilter2SrcMask  
  INTEGER as ipIfFilter2Protocol  
  INTEGER as ipIfFilter2DstPortStart  
  INTEGER as ipIfFilter2SrcPortStart  
  INTEGER as ipIfFilter2Action  
  INTEGER as ipIfFilter2Status  
  INTEGER as ipIfFilter2DstPortEnd  
  INTEGER as ipIfFilter2SrcPortEnd  
  INTEGER as ipIfFilter2TcpSyn  
  INTEGER as ipIfFilter2ProtocolPriority  

RipNetEntry  
SEQUENCE    
  IpAddress as ripNetNet  
  INTEGER as ripNetState  
  Counter as ripNetRipsIn  
  Counter as ripNetRipsOut  
  INTEGER as ripNetAlgorithm  

LpdQueueEntry  
SEQUENCE    
  INTEGER as lpdQueueStatus  
  DisplayString as lpdQueueName  
  OCTET STRING as lpdQueuePorts  
  INTEGER as lpdQueueEnabled  
  INTEGER as lpdQueueLfConversion  
  Gauge as lpdQueueTotalJobs  
  Gauge as lpdQueueActiveJobs  
  Gauge as lpdQueueWaitingJobs  
  Counter as lpdQueueProcessedJobs  
  INTEGER as lpdQueueFormFeed  
  INTEGER as lpdQueueBypass  

LpdJobEntry  
SEQUENCE    
  INTEGER as lpdJobStatus  
  INTEGER as lpdJobNumber  
  INTEGER as lpdJobAssignedPort  
  INTEGER as lpdJobFileSize  
  DisplayString as lpdJobHostName  
  DisplayString as lpdJobFileName  
  INTEGER as lpdJobState  

SecurIDPortEntry  
SEQUENCE    
  INTEGER as securIDPortIndex  
  INTEGER as securIDPortStatus  

SshPortEntry  
SEQUENCE    
  INTEGER as sshPortIndex  
  INTEGER as sshPortIncomingTcpPort  
  INTEGER as sshPortNewlineFiltering  
  INTEGER as sshPortNewline  
  INTEGER as sshPortTransmitBufferedTime  
  INTEGER as sshPortRemoteProtocol  
  OCTET STRING as sshPortBreakSequence  

IpxIfEntry  
SEQUENCE    
  INTEGER as ipxIfIndex  
  INTEGER as ipxIfState  
  INTEGER as ipxIfNetwork  
  INTEGER as ipxIfFrameStyle  
  Counter as ipxIfFramesIn  
  Counter as ipxIfFramesOut  
  Counter as ipxIfErrors  
  INTEGER as ipxIfTransitDelay  
  INTEGER as ipxIfTransitDelayActual  
  INTEGER as ipxIfProtocolPriority  
  INTEGER as ipxIfWatchdogSpoof  
  INTEGER as ipxIfStatusNetwork  

IpxNetbiosIfEntry  
SEQUENCE    
  INTEGER as ipxNetbiosIfIndex  
  INTEGER as ipxIfNetbiosForwarding  
  Counter as ipxIfNetbiosIn  
  Counter as ipxIfNetbiosOut  

IpxRipIfEntry  
SEQUENCE    
  INTEGER as ipxRipIfIndex  
  INTEGER as ipxIfRipBcst  
  INTEGER as ipxIfRipBcstDiscardTimeout  
  INTEGER as ipxIfRipBcstTimer  
  Counter as ipxIfRipIn  
  Counter as ipxIfRipOut  
  Counter as ipxIfRipAgedOut  

IpxRipEntry  
SEQUENCE    
  INTEGER as ipxRipNetwork  
  OCTET STRING as ipxRipRouter  
  INTEGER as ipxRipInterface  
  INTEGER as ipxRipHops  
  INTEGER as ipxRipTransTime  
  INTEGER as ipxRipAge  

IpxRipRtEntry  
SEQUENCE    
  INTEGER as ipxRipRtNetwork  
  OCTET STRING as ipxRipRtRouter  
  INTEGER as ipxRipRtInterface  
  INTEGER as ipxRipRtHops  
  INTEGER as ipxRipRtTransTime  
  INTEGER as ipxRipRtOrigin  
  INTEGER as ipxRipRtRowStatus  

IpxSapIfEntry  
SEQUENCE    
  INTEGER as ipxSapIfIndex  
  INTEGER as ipxIfSapBcst  
  INTEGER as ipxIfSapBcstDiscardTimeout  
  INTEGER as ipxIfSapBcstTimer  
  Counter as ipxIfSapIn  
  Counter as ipxIfSapOut  
  Counter as ipxIfSapAgedOut  

IpxSapEntry  
SEQUENCE    
  DisplayString as ipxSapName  
  INTEGER as ipxSapNetwork  
  OCTET STRING as ipxSapHost  
  INTEGER as ipxSapSocket  
  INTEGER as ipxSapInterface  
  INTEGER as ipxSapType  
  INTEGER as ipxSapAge  

IpxSapSvEntry  
SEQUENCE    
  DisplayString as ipxSapSvName  
  INTEGER as ipxSapSvNetwork  
  OCTET STRING as ipxSapSvHost  
  INTEGER as ipxSapSvSocket  
  INTEGER as ipxSapSvInterface  
  INTEGER as ipxSapSvOrigin  
  INTEGER as ipxSapSvType  
  INTEGER as ipxSapSvHops  
  INTEGER as ipxSapSvRowStatus  
  INTEGER as ipxSapSvAge  

IpxIfFilterEntry  
SEQUENCE    
  INTEGER as ipxIfFilterIndex  
  INTEGER as ipxIfFilterDestNetwork  
  OCTET STRING as ipxIfFilterDestNode  
  INTEGER as ipxIfFilterSourceNetwork  
  OCTET STRING as ipxIfFilterSourceNode  
  INTEGER as ipxIfFilterPacketType  
  INTEGER as ipxIfFilterAction  
  INTEGER as ipxIfFilterRowStatus  
  INTEGER as ipxIfFilterStatusDestNetworkAll  
  INTEGER as ipxIfFilterStatusDestNodeAll  
  INTEGER as ipxIfFilterStatusSourceNetworkAll  
  INTEGER as ipxIfFilterStatusSourceNodeAll  
  INTEGER as ipxIfFilterStatusPacketTypeAll  

IpxIfRipFilterEntry  
SEQUENCE    
  INTEGER as ipxIfRipFilterNetwork  
  INTEGER as ipxIfRipFilterType  
  INTEGER as ipxIfRipFilterAction  
  INTEGER as ipxIfRipFilterRowStatus  
  INTEGER as ipxIfRipFilterNetworkAll  
  OCTET STRING as ipxIfRipFilterHost  

IpxIfSapFilterEntry  
SEQUENCE    
  INTEGER as ipxIfSapFilterNetwork  
  INTEGER as ipxIfSapFilterType  
  INTEGER as ipxIfSapFilterServiceType  
  INTEGER as ipxIfSapFilterAction  
  INTEGER as ipxIfSapFilterRowStatus  
  INTEGER as ipxIfSapFilterNetworkAll  
  INTEGER as ipxIfSapFilterServiceTypeAll  
  DisplayString as ipxIfSapFilterName  
  OCTET STRING as ipxIfSapFilterHost  

IpxPrinterPortEntry  
SEQUENCE    
  INTEGER as ipxPrinterPortIndex  
  INTEGER as ipxPrinterPortStatus  
  DisplayString as ipxPrinterPortServer  
  INTEGER as ipxPrinterPortPrinter  
  INTEGER as ipxTimeout  

LatPortEntry  
SEQUENCE    
  INTEGER as latPortIndex  
  OCTET STRING as latPortAuthorizedGroups  
  INTEGER as latPortAutoPrompt  
  OCTET STRING as latPortCurrentGroups  
  INTEGER as latPortRemoteModification  

LatOfferedServiceEntry  
SEQUENCE    
  DisplayString as latOfferedServiceName  
  INTEGER as latOfferedServiceStatus  
  INTEGER as latOfferedServiceAllowConnections  
  DisplayString as latOfferedServiceIdentification  
  DisplayString as latOfferedServicePassword  
  OCTET STRING as latOfferedServicePortMap  
  INTEGER as latOfferedServiceQueuing  
  INTEGER as latOfferedServiceEnvironmentalManager  

LatVisibleServiceEntry  
SEQUENCE    
  DisplayString as latVisibleServiceName  
  INTEGER as latVisibleServiceStatus  
  DisplayString as latVisibleServiceNode  
  Gauge as latVisibleServiceConnectedSessions  
  DisplayString as latVisibleServiceIdentification  
  Gauge as latVisibleServiceRating  

LatNodeEntry  
SEQUENCE    
  DisplayString as latNodeName  
  INTEGER as latNodeStatus  
  Gauge as latNodeConnectedSessions  
  OCTET STRING as latNodeAddress  
  INTEGER as latNodeDataLinkFrame  
  DisplayString as latNodeIdentification  
  OCTET STRING as latNodeGroups  
  Gauge as latNodeServiceNumber  
  INTEGER as latNodeZero  
  TimeTicks as latNodeZeroTime  
  Counter as latNodeInMessages  
  Counter as latNodeOutMessages  
  Counter as latNodeInSlots  
  Counter as latNodeOutSlots  
  Counter as latNodeInBytes  
  Counter as latNodeOutBytes  
  Counter as latNodeAddressChange  
  Counter as latNodeInDuplicates  
  Counter as latNodeOutRetransmits  
  Counter as latNodeInBadMessages  
  Counter as latNodeInBadSlots  
  Counter as latNodeInSessionsAccepted  
  Counter as latNodeInSessionsRejected  

ParamServerEntry  
SEQUENCE    
  DisplayString as paramServerName  
  INTEGER as paramServerEntryStatus  
  AddressType as paramServerAddressType  
  OCTET STRING as paramServerAddress  
  INTEGER as paramServerStoredVersion  
  DateTime as paramServerStoredTime  
  INTEGER as paramServerStoredStatus  
  INTEGER as paramServerStoredFailure  

XPppConfigEntry  
SEQUENCE    
  INTEGER as xPppConfigOpen  
  INTEGER as xPppConfigActive  
  INTEGER as xPppConfigDefaults  
  INTEGER as xPppConfigRestartTimer  
  INTEGER as xPppConfigConfLimit  
  INTEGER as xPppConfigFailLimit  
  INTEGER as xPppConfigPacketLogging  
  INTEGER as xPppConfigKATimer  
  INTEGER as xPppConfigKATimeout  

XPppStatusEntry  
SEQUENCE    
  INTEGER as xPppStatusState  
  INTEGER as xPppLinkOpen  
  Counter as xPppHdlcRxTotalPkts  
  Counter as xPppHdlcTxTotalPkts  
  Counter as xPppHdlcRxFrameErrs  
  Counter as xPppHdlcRxNoBuffer  
  Counter as xPppHdlcTxNoBuffer  
  Counter as xPppHdlcRxBadFcs  
  Counter as xPppHdlcVJDiscards  

XPppLcpConfigEntry  
SEQUENCE    
  INTEGER as xPppLcpConfigAuth  
  INTEGER as xPppLcpConfigChapAuth  

XPppLcpStatusEntry  
SEQUENCE    
  INTEGER as xPppLcpStatusState  
  INTEGER as xPppLcpStatusRxAuth  
  INTEGER as xPppLcpStatusTxAuth  
  Counter as xPppLcpStatusRxConReq  
  Counter as xPppLcpStatusTxConReq  
  Counter as xPppLcpStatusRxConNak  
  Counter as xPppLcpStatusTxConNak  
  Counter as xPppLcpStatusRxConAck  
  Counter as xPppLcpStatusTxConAck  
  Counter as xPppLcpStatusRxConRej  
  Counter as xPppLcpStatusTxConRej  
  Counter as xPppLcpStatusRxTrmReq  
  Counter as xPppLcpStatusTxTrmReq  
  Counter as xPppLcpStatusRxTrmAck  
  Counter as xPppLcpStatusTxTrmAck  
  Counter as xPppLcpStatusRxEcoReq  
  Counter as xPppLcpStatusTxEcoReq  
  Counter as xPppLcpStatusRxEcoRep  
  Counter as xPppLcpStatusTxEcoRep  
  Counter as xPppLcpStatusRxCodRej  
  Counter as xPppLcpStatusTxCodRej  
  Counter as xPppLcpStatusRxProRej  
  Counter as xPppLcpStatusTxProRej  
  INTEGER as xPppLcpStatusState2  

XPppIpcpConfigEntry  
SEQUENCE    
  IpAddress as xPppIpcpConfigLocalAddress  
  IpAddress as xPppIpcpConfigRemoteAddress  
  INTEGER as xPppIpcpConfigVJCompSlots  
  IpAddress as xPppIpcpConfigRangeStart  
  IpAddress as xPppIpcpConfigRangeEnd  
  INTEGER as xPppIpcpConfigState  
  IpAddress as xPppIpcpConfigLocalRangeStart  
  IpAddress as xPppIpcpConfigLocalRangeEnd  
  IpAddress as xPppIpcpConfigPppIpMask  

XPppIpcpAsyncConfigEntry  
SEQUENCE    
  INTEGER as xPppIpcpAsyncConfigBrdcast  

XPppIpcpStatusEntry  
SEQUENCE    
  INTEGER as xPppIpcpStatusState  
  IpAddress as xPppIpcpStatusLocalAddress  
  IpAddress as xPppIpcpStatusRemoteAddress  
  Counter as xPppIpcpRxConReq  
  Counter as xPppIpcpTxConReq  
  Counter as xPppIpcpRxConNak  
  Counter as xPppIpcpTxConNak  
  Counter as xPppIpcpRxConAck  
  Counter as xPppIpcpTxConAck  
  Counter as xPppIpcpRxConRej  
  Counter as xPppIpcpTxConRej  
  Counter as xPppIpcpRxTrmReq  
  Counter as xPppIpcpTxTrmReq  
  Counter as xPppIpcpRxTrmAck  
  Counter as xPppIpcpTxTrmAck  
  Counter as xPppIpcpRxPkts  
  Counter as xPppIpcpTxPkts  
  INTEGER as xPppIpcpStatusState2  

XPppAuthConfigEntry  
SEQUENCE    
  INTEGER as xPppAuthChapChallengeTimer  
  INTEGER as xPppAuthPapConfigState  
  INTEGER as xPppAuthChapConfigState  

XPppAuthStatusEntry  
SEQUENCE    
  INTEGER as xPppPapStatusState  
  INTEGER as xPppChapStatusState  

XPppIpxcpConfigEntry  
SEQUENCE    
  INTEGER as xPppIpxcpCipxCompression  
  OCTET STRING as xPppIpxcpConfigRemoteNode  

XPppIpxcpStatusEntry  
SEQUENCE    
  INTEGER as xPppIpxcpStatusState  
  INTEGER as xPppIpxcpCipxInCompression  
  INTEGER as xPppIpxcpCipxOutCompression  
  INTEGER as xPppIpxcpCipxInSlots  
  INTEGER as xPppIpxcpCipxOutSlots  
  OCTET STRING as xPppIpxcpStatusRemoteNode  

XPppIpxcpCountersEntry  
SEQUENCE    
  Counter as xPppIpxcpRxConReq  
  Counter as xPppIpxcpTxConReq  
  Counter as xPppIpxcpRxConNak  
  Counter as xPppIpxcpTxConNak  
  Counter as xPppIpxcpRxConAck  
  Counter as xPppIpxcpTxConAck  
  Counter as xPppIpxcpRxConRej  
  Counter as xPppIpxcpTxConRej  
  Counter as xPppIpxcpRxTrmReq  
  Counter as xPppIpxcpTxTrmReq  
  Counter as xPppIpxcpRxTrmAck  
  Counter as xPppIpxcpTxTrmAck  

XRadiusPortEntry  
SEQUENCE    
  INTEGER as xRadiusPortIndex  
  INTEGER as xRadiusPortStatus  
  INTEGER as xRadiusPortSolicitStatus  
  INTEGER as xRadiusAcctPortStatus  

ResEntry  
SEQUENCE    
  INTEGER as resType  
  Gauge as resCurrent  
  Gauge as resWorst  
  INTEGER as resAdminMaximum  
  Counter as resLacks  
  DateTime as resLackTime  
  INTEGER as resOperMaximum  

FeatEntry  
SEQUENCE    
  INTEGER as featType  
  INTEGER as featStatus  
  DisplayString as featKey  

BootRecordEntry  
SEQUENCE    
  INTEGER as bootRecordIndex  
  DisplayString as bootRecordLoadInternetFile  
  IpAddress as bootRecordLoadInternetServer  
  IpAddress as bootRecordLoadInternetGateway  
  INTEGER as bootRecordLoadBootpTftp  
  INTEGER as bootRecordLoadTftpDirect  
  INTEGER as bootRecordLoadLocal  
  INTEGER as bootRecordLoadMop  
  INTEGER as bootRecordLoadProprietary  
  INTEGER as bootRecordLoadRarpTftp  
  INTEGER as bootRecordDumpBootpTftp  
  INTEGER as bootRecordDumpLocal  
  INTEGER as bootRecordDumpMop  
  INTEGER as bootRecordDumpProprietary  
  INTEGER as bootRecordDumpRarpTftp  
  INTEGER as bootRecordParamBootpTftp  
  INTEGER as bootRecordParamLocal  
  INTEGER as bootRecordParamMop  
  INTEGER as bootRecordParamProprietary  
  INTEGER as bootRecordParamRarpTftp  
  INTEGER as bootRecordStatus  
  DisplayString as bootRecordMopFile  
  IpAddress as bootRecordInternetAddress  
  INTEGER as bootRecordParamTftpDirect  
  DisplayString as bootRecordInternetDelimiter