NETGEAR-LOGGING-MIB

File: NETGEAR-LOGGING-MIB.mib (19255 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC NETGEAR-REF-MIB
INET-ADDRESS-MIB NETGEAR-INVENTORY-MIB

Imported symbols

Gauge32 Counter32 MODULE-IDENTITY
OBJECT-TYPE Integer32 Unsigned32
TimeTicks NOTIFICATION-TYPE TEXTUAL-CONVENTION
DisplayString DateAndTime RowStatus
ng7000Switch InetAddress agentInventoryComponentIndex

Defined Objects

agentLogging 1.3.6.1.4.1.4526.10.14
This MIB provides objects to configure and display events logged on this system.
MODULE-IDENTITY    

agentLogConfigGroup 1.3.6.1.4.1.4526.10.14.1
OBJECT IDENTIFIER    

agentLogInMemoryConfigGroup 1.3.6.1.4.1.4526.10.14.1.1
OBJECT IDENTIFIER    

agentLogInMemoryAdminStatus 1.3.6.1.4.1.4526.10.14.1.1.1
Administratively enable/disable the In Memory log.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentLogInMemoryBehavior 1.3.6.1.4.1.4526.10.14.1.1.4
Configures the behavior of the In Memory Log when it becomes full. A value of wrap(1) will cause the oldest log message to be removed, making room for the new message. A value of stop-on-full(2) will prevent any further logging.
OBJECT-TYPE    
  INTEGER wrap(1), stop-on-full(2)  

agentLogConsoleConfigGroup 1.3.6.1.4.1.4526.10.14.1.2
OBJECT IDENTIFIER    

agentLogConsoleAdminStatus 1.3.6.1.4.1.4526.10.14.1.2.1
Admin mode for console logs
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentLogConsoleSeverityFilter 1.3.6.1.4.1.4526.10.14.1.2.2
Severity filter for console logs
OBJECT-TYPE    
  AgentLogSeverity  

agentLogPersistentConfigGroup 1.3.6.1.4.1.4526.10.14.1.3
OBJECT IDENTIFIER    

agentLogPersistentAdminStatus 1.3.6.1.4.1.4526.10.14.1.3.1
This control disables/enables logging for the persistent startup log. Setting this value to disable does not clear the current contents of the log.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentLogPersistentSeverityFilter 1.3.6.1.4.1.4526.10.14.1.3.2
This control specifies the minimum severity to log to the startup and operation log. Messages with an equal or lower numerical severity are logged.
OBJECT-TYPE    
  AgentLogSeverity  

agentLogSysLogConfigGroup 1.3.6.1.4.1.4526.10.14.1.4
OBJECT IDENTIFIER    

agentLogSyslogAdminStatus 1.3.6.1.4.1.4526.10.14.1.4.1
For Enabling and Disabling logging to configured syslog hosts. Setting this to disable stops logging to all syslog hosts.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentLogSyslogLocalPort 1.3.6.1.4.1.4526.10.14.1.4.3
This is the port on the local host from which syslog messages are sent.
OBJECT-TYPE    
  Unsigned32 1..65535  

agentLogSyslogMaxHosts 1.3.6.1.4.1.4526.10.14.1.4.4
Maximum number of hosts that can be configured for logging syslog messages.
OBJECT-TYPE    
  Unsigned32  

agentLogSyslogHostTable 1.3.6.1.4.1.4526.10.14.1.4.5
Syslog host table containing syslog host entries.
OBJECT-TYPE    
  SEQUENCE OF  
    AgentLogSyslogHostEntry

agentLogSyslogHostEntry 1.3.6.1.4.1.4526.10.14.1.4.5.1
Syslog Host entry attributes.
OBJECT-TYPE    
  AgentLogSyslogHostEntry  

agentLogHostTableIndex 1.3.6.1.4.1.4526.10.14.1.4.5.1.1
Index to syslog host entry in syslog host table.
OBJECT-TYPE    
  Unsigned32  

agentLogHostTableIpAddress 1.3.6.1.4.1.4526.10.14.1.4.5.1.3
Syslog Host table IP Address.
OBJECT-TYPE    
  InetAddress  

agentLogHostTablePort 1.3.6.1.4.1.4526.10.14.1.4.5.1.4
Syslog Host table port number.
OBJECT-TYPE    
  Unsigned32 1..65535  

agentLogHostTableSeverityFilter 1.3.6.1.4.1.4526.10.14.1.4.5.1.5
Configures the minimum severity that will be stored in the In Memory log.
OBJECT-TYPE    
  AgentLogSeverity  

agentLogHostTableRowStatus 1.3.6.1.4.1.4526.10.14.1.4.5.1.7
Syslog Host table row status
OBJECT-TYPE    
  RowStatus  

agentLogCliCommandsConfigGroup 1.3.6.1.4.1.4526.10.14.1.5
OBJECT IDENTIFIER    

agentLogCliCommandsAdminStatus 1.3.6.1.4.1.4526.10.14.1.5.1
Administratively enable/disable the logging of the CLI Commands
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentLogStatisticsGroup 1.3.6.1.4.1.4526.10.14.2
OBJECT IDENTIFIER    

agentLogMessagesReceived 1.3.6.1.4.1.4526.10.14.2.1
The number of messages received by the log process. This includes messages that are dropped or ignored.
OBJECT-TYPE    
  Counter32  

agentLogMessagesDropped 1.3.6.1.4.1.4526.10.14.2.2
The number of messages that could not be processed.
OBJECT-TYPE    
  Counter32  

agentLogSyslogMessagesRelayed 1.3.6.1.4.1.4526.10.14.2.3
The number of messages forwarded by the syslog function to a syslog host. Messages forwarded to multiple hosts are counted once for each host.
OBJECT-TYPE    
  Counter32  

agentLogSyslogMessagesIgnored 1.3.6.1.4.1.4526.10.14.2.4
The number of messages that were not processed by the syslog process because the component name or the priority level did not match any specification.
OBJECT-TYPE    
  Counter32  

agentLogMessageReceivedTime 1.3.6.1.4.1.4526.10.14.2.5
The local time when a message was last received by the log subsystem specified as the number of non-leap seconds since 00:00:00 UTC on January 1 1970.
OBJECT-TYPE    
  DateAndTime  

agentLogSyslogMessageDeliveredTime 1.3.6.1.4.1.4526.10.14.2.6
The local time when a message was last delivered to a syslog host specified as the number of non-leap seconds since 00:00:00 UTC on January 1 1970.
OBJECT-TYPE    
  DateAndTime  

agentLogInMemoryGroup 1.3.6.1.4.1.4526.10.14.3
OBJECT IDENTIFIER    

agentLogInMemoryLogCount 1.3.6.1.4.1.4526.10.14.3.1
The count of valid entries in the in-memory log.
OBJECT-TYPE    
  Gauge32  

agentLogInMemoryTable 1.3.6.1.4.1.4526.10.14.3.2
The in-memory log table containing sequence of in-memory log entries.
OBJECT-TYPE    
  SEQUENCE OF  
    AgentLogInMemoryEntry

agentLogInMemoryEntry 1.3.6.1.4.1.4526.10.14.3.2.1
An individual message entry in in-memory log table.
OBJECT-TYPE    
  AgentLogInMemoryEntry  

agentLogInMemoryMsgIndex 1.3.6.1.4.1.4526.10.14.3.2.1.1
The index to message entry in the in-memory log table.
OBJECT-TYPE    
  Unsigned32  

agentLogInMemoryMsgText 1.3.6.1.4.1.4526.10.14.3.2.1.2
Message text info for inmemory logged messages.
OBJECT-TYPE    
  DisplayString  

agentLogPersistentGroup 1.3.6.1.4.1.4526.10.14.4
OBJECT IDENTIFIER    

agentLogPersistentLogCount 1.3.6.1.4.1.4526.10.14.4.1
The count of valid entries in the persistent log.
OBJECT-TYPE    
  Counter32  

agentLogPersistentTable 1.3.6.1.4.1.4526.10.14.4.4
Table for storing persistent log messages.
OBJECT-TYPE    
  SEQUENCE OF  
    AgentLogPersistentEntry

agentLogPersistentEntry 1.3.6.1.4.1.4526.10.14.4.4.1
Log entry details for logging message in persistent log table.
OBJECT-TYPE    
  AgentLogPersistentEntry  

agentLogMsgPersistentMsgIndex 1.3.6.1.4.1.4526.10.14.4.4.1.1
Table index for logging message in persistent log table.
OBJECT-TYPE    
  Unsigned32  

agentLogMsgPersistentMsgText 1.3.6.1.4.1.4526.10.14.4.4.1.2
The text corresponding to persistent log message.
OBJECT-TYPE    
  DisplayString  

Defined Objects

AgentLogFacility  
Facility code used in determining the SysLog Priority value.
TEXTUAL-CONVENTION    
  INTEGER kernel(0), user(1), mail(2), system(3), security(4), syslog(5), lpr(6), nntp(7), uucp(8), cron(9), auth(10), ftp(11), ntp(12), audit(13), alert(14), clock(15), local0(16), local1(17), local2(18), local3(19), local4(20), local5(21), local6(22), local7(23)  

AgentLogSeverity  
Severity code used in determining the SysLog Priority value.
TEXTUAL-CONVENTION    
  INTEGER emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), informational(6), debug(7)  

AgentLogSyslogHostEntry  
SEQUENCE    
  Unsigned32 as agentLogHostTableIndex  
  InetAddress as agentLogHostTableIpAddress  
  Unsigned32 as agentLogHostTablePort  
  AgentLogSeverity as agentLogHostTableSeverityFilter  
  RowStatus as agentLogHostTableRowStatus  

AgentLogInMemoryEntry  
SEQUENCE    
  Unsigned32 as agentLogInMemoryMsgIndex  
  DisplayString as agentLogInMemoryMsgText  

AgentLogPersistentEntry  
SEQUENCE    
  Unsigned32 as agentLogMsgPersistentMsgIndex  
  DisplayString as agentLogMsgPersistentMsgText