NETSCREEN-INTERFACE-MIB

File: NETSCREEN-INTERFACE-MIB.mib (20490 bytes)

Imported modules

NETSCREEN-SMI SNMPv2-SMI SNMPv2-TC

Imported symbols

netscreenInterface Counter32 Integer32
IpAddress MODULE-IDENTITY OBJECT-TYPE
DisplayString PhysAddress

Defined Objects

netscreenInterfaceMibModule 1.3.6.1.4.1.3224.9.0
This module defines the object that are used to monitor NS's interface configuration
MODULE-IDENTITY    

nsIfTable 1.3.6.1.4.1.3224.9.1
All NetScreen devices have a trusted interface and an untrusted interface. The NetScreen-10 and -100 also have a DMZ interface. Additionally, on each of the virtual systems supported by the NetScreen-1000 there can be on or more tursted subinterfaces linking a particular virtual system to one or more virtual LANs. Other interfaces-some physical, some logical, and some virtual-provide exclusive channels for administrative traffic, or for communication among member in a redundant group. In this table, it will collect following interface: tursted interface, untrusted interface, DMZ interface, Management Interface and Subinterface.
OBJECT-TYPE    
  SEQUENCE OF  
    NsIfEntry

nsIfEntry 1.3.6.1.4.1.3224.9.1.1
nsIfEntry collects some attributes about NetScreen interface settings.
OBJECT-TYPE    
  NsIfEntry  

nsIfIndex 1.3.6.1.4.1.3224.9.1.1.1
Interface number which uniquely identifies an interface.
OBJECT-TYPE    
  Integer32 0..2147483647  

nsIfName 1.3.6.1.4.1.3224.9.1.1.2
Each interface has a readable name such as 'trust', 'trust/1', etc.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

nsIfVsys 1.3.6.1.4.1.3224.9.1.1.3
According NetScreen's concepts, each interface belongs to one virtual system. This attribute displays the virtual system name an interface belongs to. If the device is device which doesn't support vsys such as NS-100, we can logically think all the setting belongs to 'root' vsys.
OBJECT-TYPE    
  Integer32  

nsIfZone 1.3.6.1.4.1.3224.9.1.1.4
Each interface belongs to one security zone. This attribute displays the security zone name an interface belongs to.
OBJECT-TYPE    
  Integer32  

nsIfStatus 1.3.6.1.4.1.3224.9.1.1.5
The interface status which indicates interface's operational status.
OBJECT-TYPE    
  INTEGER down(0), up(1), ready(2), inactive(3)  

nsIfIp 1.3.6.1.4.1.3224.9.1.1.6
Each interface must be assigned an IP address.
OBJECT-TYPE    
  IpAddress  

nsIfNetmask 1.3.6.1.4.1.3224.9.1.1.7
Each interface must belong to a subnet represented by netmask.
OBJECT-TYPE    
  IpAddress  

nsIfGateway 1.3.6.1.4.1.3224.9.1.1.8
Default gateway ip address.
OBJECT-TYPE    
  IpAddress  

nsIfMngIp 1.3.6.1.4.1.3224.9.1.1.9
Trusted, untrusted and DMZ interfaces can have two IP address: an interface IP address that corresponds to the physical port through which that interface connects to a network, and a Manage IP address that can be used to receive administrative traffic
OBJECT-TYPE    
  IpAddress  

nsIfMode 1.3.6.1.4.1.3224.9.1.1.10
NetScreen interface can has three operation modes. They are transparent, nat and route.
OBJECT-TYPE    
  INTEGER transparent(0), nat(1), route(2), not-applicable(3)  

nsIfMAC 1.3.6.1.4.1.3224.9.1.1.11
MAC address the interface has.
OBJECT-TYPE    
  PhysAddress  

nsIfMngTelnet 1.3.6.1.4.1.3224.9.1.1.12
This attribute is used to indicate whether the interface permits telnet management.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

nsIfMngSCS 1.3.6.1.4.1.3224.9.1.1.13
This attribute is used to indicate whether the interface permits Secure Command Shell management.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

nsIfMngWEB 1.3.6.1.4.1.3224.9.1.1.14
This attribute is used to indicate whether the interface permits WEB UI management.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

nsIfMngSSL 1.3.6.1.4.1.3224.9.1.1.15
This attribute is used to indicate whether the interface permits SSL management.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

nsIfMngSNMP 1.3.6.1.4.1.3224.9.1.1.16
This attribute is used to indicate whether the interface permits SNMP management.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

nsIfMngGlobal 1.3.6.1.4.1.3224.9.1.1.17
This attribute is used to indicate whether the interface permits NS Global management.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

nsIfMngGlobalPro 1.3.6.1.4.1.3224.9.1.1.18
This attribute is used to indicate whether the interface permits NS Global Pro management.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

nsIfMngPing 1.3.6.1.4.1.3224.9.1.1.19
This attribute is used to indicate whether the interface permits Ping go-through.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

nsIfMngIdentReset 1.3.6.1.4.1.3224.9.1.1.20
This attribute is used to indicate whether the interface permits ident reset.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

nsIfInfo 1.3.6.1.4.1.3224.9.1.1.21
Internal id assigned to this interface. Stays persistent across resets.
OBJECT-TYPE    
  Integer32 0..2147483647  

nsIfDescr 1.3.6.1.4.1.3224.9.1.1.22
Each interface has a a configurable descriptor string.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

nsIfSecondaryIpTable 1.3.6.1.4.1.3224.9.2
In some ScreenOS, it supports multiple IP addresses and related subnets based on the same interface. This table collects the multiple IP addresses configuration on an interface.
OBJECT-TYPE    
  SEQUENCE OF  
    NsIfSecondaryIpEntry

nsIfSecondaryIpEntry 1.3.6.1.4.1.3224.9.2.1
nsIfSecondaryIpEntry collects some attributes about multiple IP configurations on an interface.
OBJECT-TYPE    
  NsIfSecondaryIpEntry  

nsIfSecondaryIpIndex 1.3.6.1.4.1.3224.9.2.1.1
The table index used as primary key when retrieving the table.
OBJECT-TYPE    
  Integer32 0..2147483647  

nsIfSecondaryIpIfIdx 1.3.6.1.4.1.3224.9.2.1.2
The index value which uniquely identifies an interface the secodary ip belongs to. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  Integer32  

nsIfSecondaryIpVsys 1.3.6.1.4.1.3224.9.2.1.3
According NetScreen's concepts, each interface belongs to one virtual system. This attribute displays the virtual system ID an interface belongs to. If the device is device which doesn't support vsys such as NS-100, we can logically think all the setting belongs to 'root' vsys.
OBJECT-TYPE    
  Integer32  

nsIfSecondaryIpZone 1.3.6.1.4.1.3224.9.2.1.4
each interface belongs to one security zone. this attribute displays the security zone name an interface belongs to.
OBJECT-TYPE    
  Integer32  

nsIfSecondaryIpAddress 1.3.6.1.4.1.3224.9.2.1.5
Ip Address value.
OBJECT-TYPE    
  IpAddress  

nsIfSecondaryIpNetmask 1.3.6.1.4.1.3224.9.2.1.6
Subnet of a ip belongs to.
OBJECT-TYPE    
  IpAddress  

nsIfSecondaryIpIfInfo 1.3.6.1.4.1.3224.9.2.1.7
Internal id assigned to this interface. Stays persistent across resets.
OBJECT-TYPE    
  Integer32 0..2147483647  

nsIfFlowTable 1.3.6.1.4.1.3224.9.3
nsIfFlowTable is used to get flow statistical information of the interface.
OBJECT-TYPE    
  SEQUENCE OF  
    NsIfFlowEntry

nsIfFlowEntry 1.3.6.1.4.1.3224.9.3.1
Table entry collect some attributes about interface flow counters.
OBJECT-TYPE    
  NsIfFlowEntry  

nsIfFlowIfIdx 1.3.6.1.4.1.3224.9.3.1.1
Unique interface id, also used as table index.
OBJECT-TYPE    
  Integer32 0..2147483647  

nsIfFlowVsys 1.3.6.1.4.1.3224.9.3.1.2
According NetScreen's concepts. each interface belongs to one virtual system. This attribute displays the virtual system name an interface belongs to.
OBJECT-TYPE    
  Integer32  

nsIfFlowInByte 1.3.6.1.4.1.3224.9.3.1.3
Incoming byte number arriving at the this interface
OBJECT-TYPE    
  Counter32  

nsIfFlowInPacket 1.3.6.1.4.1.3224.9.3.1.4
Incoming packet number arriving at the this interface
OBJECT-TYPE    
  Counter32  

nsIfFlowOutByte 1.3.6.1.4.1.3224.9.3.1.5
Outgoing byte number sending through this interface
OBJECT-TYPE    
  Counter32  

nsIfFlowOutPacket 1.3.6.1.4.1.3224.9.3.1.6
Outgoing packet number sending through this interface
OBJECT-TYPE    
  Counter32  

nsIfFlowInVpn 1.3.6.1.4.1.3224.9.3.1.7
VPN packet go through this interface
OBJECT-TYPE    
  Counter32  

nsIfInVlan 1.3.6.1.4.1.3224.9.3.1.8
Incoming vlan packet
OBJECT-TYPE    
  Counter32  

nsIfOutVlan 1.3.6.1.4.1.3224.9.3.1.9
Outgoing vlan packet
OBJECT-TYPE    
  Counter32  

nsIfFlowIfInfo 1.3.6.1.4.1.3224.9.3.1.10
Internal id assigned to this interface. Stays persistent across resets.
OBJECT-TYPE    
  Integer32 0..2147483647  

nsIfMonTable 1.3.6.1.4.1.3224.9.4
This table collects some of dropped packet counters of interface
OBJECT-TYPE    
  SEQUENCE OF  
    NsIfMonEntry

nsIfMonEntry 1.3.6.1.4.1.3224.9.4.1
An entry containing tunnel information
OBJECT-TYPE    
  NsIfMonEntry  

nsIfMonIfIdx 1.3.6.1.4.1.3224.9.4.1.1
Unique interface id, also used as table index.
OBJECT-TYPE    
  Integer32 0..2147483647  

nsIfMonVsys 1.3.6.1.4.1.3224.9.4.1.2
According NetScreen's concepts, each interface belongs to one virtual system. This attribute displays the virtual system name an interface belongs to.
OBJECT-TYPE    
  Integer32  

nsIfMonPlyDeny 1.3.6.1.4.1.3224.9.4.1.3
Packet drop since denied by policy.
OBJECT-TYPE    
  Counter32  

nsIfMonAuthFail 1.3.6.1.4.1.3224.9.4.1.4
Packet drop due to authentication failed.
OBJECT-TYPE    
  Counter32  

nsIfMonUrlBlock 1.3.6.1.4.1.3224.9.4.1.5
Packet drop due to URL blocking.
OBJECT-TYPE    
  Counter32  

nsIfMonTrMngQueue 1.3.6.1.4.1.3224.9.4.1.6
packet queue up due to traffic management
OBJECT-TYPE    
  Counter32  

nsIfMonTrMngDrop 1.3.6.1.4.1.3224.9.4.1.7
Packet drop due to traffic management
OBJECT-TYPE    
  Counter32  

nsIfMonEncFail 1.3.6.1.4.1.3224.9.4.1.8
IPSec enc failed due to sa not available, no ipak, etc
OBJECT-TYPE    
  Counter32  

nsIfMonNoSa 1.3.6.1.4.1.3224.9.4.1.9
packet drop due to no sa found for incomig spi
OBJECT-TYPE    
  Counter32  

nsIfMonNoSaPly 1.3.6.1.4.1.3224.9.4.1.10
packet drop due to no policy associated with found sa
OBJECT-TYPE    
  Counter32  

nsIfMonSaInactive 1.3.6.1.4.1.3224.9.4.1.11
packet drop due to sa not active
OBJECT-TYPE    
  Counter32  

nsIfMonSaPolicyDeny 1.3.6.1.4.1.3224.9.4.1.12
packet drop due to denial by sa policy
OBJECT-TYPE    
  Counter32  

nsIfMonIfInfo 1.3.6.1.4.1.3224.9.4.1.13
Internal id assigned to this interface. Stays persistent across resets.
OBJECT-TYPE    
  Integer32 0..2147483647  

Defined Objects

NsIfEntry  
SEQUENCE    
  Integer32 as nsIfIndex  
  DisplayString as nsIfName  
  Integer32 as nsIfVsys  
  Integer32 as nsIfZone  
  INTEGER as nsIfStatus  
  IpAddress as nsIfIp  
  IpAddress as nsIfNetmask  
  IpAddress as nsIfGateway  
  IpAddress as nsIfMngIp  
  INTEGER as nsIfMode  
  PhysAddress as nsIfMAC  
  INTEGER as nsIfMngTelnet  
  INTEGER as nsIfMngSCS  
  INTEGER as nsIfMngWEB  
  INTEGER as nsIfMngSSL  
  INTEGER as nsIfMngSNMP  
  INTEGER as nsIfMngGlobal  
  INTEGER as nsIfMngGlobalPro  
  INTEGER as nsIfMngPing  
  INTEGER as nsIfMngIdentReset  
  Integer32 as nsIfInfo  
  DisplayString as nsIfDescr  

NsIfFlowEntry  
SEQUENCE    
  Integer32 as nsIfFlowIfIdx  
  Integer32 as nsIfFlowVsys  
  Counter32 as nsIfFlowInByte  
  Counter32 as nsIfFlowInPacket  
  Counter32 as nsIfFlowOutByte  
  Counter32 as nsIfFlowOutPacket  
  Counter32 as nsIfFlowInVpn  
  Counter32 as nsIfInVlan  
  Counter32 as nsIfOutVlan  
  Integer32 as nsIfFlowIfInfo  

NsIfMonEntry  
SEQUENCE    
  Integer32 as nsIfMonIfIdx  
  Integer32 as nsIfMonVsys  
  Counter32 as nsIfMonPlyDeny  
  Counter32 as nsIfMonAuthFail  
  Counter32 as nsIfMonUrlBlock  
  Counter32 as nsIfMonTrMngQueue  
  Counter32 as nsIfMonTrMngDrop  
  Counter32 as nsIfMonEncFail  
  Counter32 as nsIfMonNoSa  
  Counter32 as nsIfMonNoSaPly  
  Counter32 as nsIfMonSaInactive  
  Counter32 as nsIfMonSaPolicyDeny  
  Integer32 as nsIfMonIfInfo  

NsIfSecondaryIpEntry  
SEQUENCE    
  Integer32 as nsIfSecondaryIpIndex  
  Integer32 as nsIfSecondaryIpIfIdx  
  Integer32 as nsIfSecondaryIpVsys  
  Integer32 as nsIfSecondaryIpZone  
  IpAddress as nsIfSecondaryIpAddress  
  IpAddress as nsIfSecondaryIpNetmask  
  Integer32 as nsIfSecondaryIpIfInfo