NS-OPT-MIB

File: NS-OPT-MIB.mib (6576 bytes)

Imported modules

RFC1155-SMI RFC-1212

Imported symbols

enterprises OBJECT-TYPE

Defined Objects

codex 1.3.6.1.4.1.449
OBJECT IDENTIFIER    

cdxProductSpecific 1.3.6.1.4.1.449.2
OBJECT IDENTIFIER    

cdx6500 1.3.6.1.4.1.449.2.1
OBJECT IDENTIFIER    

cdx6500Configuration 1.3.6.1.4.1.449.2.1.2
OBJECT IDENTIFIER    

cdx6500CfgGeneralGroup 1.3.6.1.4.1.449.2.1.2.2
OBJECT IDENTIFIER    

cdx6500NetServCfgTable 1.3.6.1.4.1.449.2.1.2.2.20
This table contains all the configuration objects for the Network Service Features.
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500NetServCfgTableEntry

cdx6500NetServCfgTableEntry 1.3.6.1.4.1.449.2.1.2.2.20.1
Parameters in the Network Services Configuration Table.
OBJECT-TYPE    
  Cdx6500NetServCfgTableEntry  

cdx6500NetServCfgEntryNumber 1.3.6.1.4.1.449.2.1.2.2.20.1.1
This is not a configurable parameter. This identifies the Network Services Configuration Table entry being configured by the other parameters in the record.
OBJECT-TYPE    
  INTEGER 1..1000  

cdx6500NetServCfgPortAndStnId 1.3.6.1.4.1.449.2.1.2.2.20.1.2
This parameter identifies the port and station that the Network Services Data Compression feature will be enabled on. The wild card (match anything) character is * and can also be part of the entry. The following are the only valid port types: X25- (Examples: X25-1(16) or X25-1*) FRA- (Examples: FRA-3S1 or FRA-3*) LCON- (Examples: LCON-1 or LCON-*) TCOP- (Examples: TCOP-1 or TCOP-*) TBOP- (Examples: TBOP-1 or TBOP-*). NOTE: The hyphen is required and there should be no leading spaces. The range is 0-31 alphanumeric characters, the default value is blank.
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

cdx6500NetServCfgFeaturesLevel 1.3.6.1.4.1.449.2.1.2.2.20.1.3
This parameter specifies the Network Services features level. disable - The feature is not requested. negotiate - Negotiate for the feature. The feature is desired, but if not available bring up the virtual circuit anyway, without the feature. required - Required for call. Bring up the connection only if the feature is available on both ends. forceOn - The feature is required for the circuit to come up.
OBJECT-TYPE    
  INTEGER disable(1), negotiate(2), required(3), forceOn(4)  

cdx6500Statistics 1.3.6.1.4.1.449.2.1.3
OBJECT IDENTIFIER    

cdx6500StatOtherStatsGroup 1.3.6.1.4.1.449.2.1.3.2
OBJECT IDENTIFIER    

cdx6500NetServStatTable 1.3.6.1.4.1.449.2.1.3.2.11
The Network Services NS Channel Statistics Table.
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500NetServStatTableEntry

cdx6500NetServStatTableEntry 1.3.6.1.4.1.449.2.1.3.2.11.1
Each entry in this table pertains to the Network Services (NS) Channel Statistics.
OBJECT-TYPE    
  Cdx6500NetServStatTableEntry  

cdx6500NetServStatUsedChannels 1.3.6.1.4.1.449.2.1.3.2.11.1.1
The number of NS Channels in use.
OBJECT-TYPE    
  INTEGER  

cdx6500NetServStatMaxChannels 1.3.6.1.4.1.449.2.1.3.2.11.1.2
The maximum number of NS Channels used.
OBJECT-TYPE    
  INTEGER  

cdx6500NetServStatUnavailChannels 1.3.6.1.4.1.449.2.1.3.2.11.1.3
The number of NS Channels not available for allocation.
OBJECT-TYPE    
  INTEGER  

cdx6500Controls 1.3.6.1.4.1.449.2.1.4
OBJECT IDENTIFIER    

Defined Objects

DisplayString  
OCTET STRING    

Cdx6500NetServCfgTableEntry  
SEQUENCE    
  INTEGER as cdx6500NetServCfgEntryNumber  
  DisplayString as cdx6500NetServCfgPortAndStnId  
  INTEGER as cdx6500NetServCfgFeaturesLevel  

Cdx6500NetServStatTableEntry  
SEQUENCE    
  INTEGER as cdx6500NetServStatUsedChannels  
  INTEGER as cdx6500NetServStatMaxChannels  
  INTEGER as cdx6500NetServStatUnavailChannels