NSCTRAP

File: NSCTRAP.mib (13916 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC-1215
RFC1213-MIB

Imported symbols

enterprises OBJECT-TYPE TRAP-TYPE
ifIndex ifDescr ifType
DisplayString

Defined Objects

nsc 1.3.6.1.4.1.10
OBJECT IDENTIFIER    

nscMib 1.3.6.1.4.1.10.2
OBJECT IDENTIFIER    

nscManagement 1.3.6.1.4.1.10.2.2
OBJECT IDENTIFIER    

nscTraps 1.3.6.1.4.1.10.2.2.4
OBJECT IDENTIFIER    

nscTrapsProtBindIndex 1.3.6.1.4.1.10.2.2.4.1
The communication protocols whose bind state changes would cause traps to be generated.
OBJECT-TYPE    
  INTEGER ip(1), decnet(2), appleTalk(3), ipx(4), xns(5), bridging(9), bridgingEc(10)  

protocolBound 1.3.6.1.4.1.10.2.2.4.1
A protocolBound trap is sent when a protocol is bound to an interface.
TRAP-TYPE    
  ifIndex  
  ifDescr  
  ifType  
  nscTrapsProtBindIndex  

nscTrapsFddiSMTCFState 1.3.6.1.4.1.10.2.2.4.2
The attachment configuration for the station or concentrator. The values are the same as those defined in the SMT group in RFC-1285.
OBJECT-TYPE    
  INTEGER cf0(1), cf1(2), cf2(3), cf3(4), cf4(5), cf5(6)  

protocolUnbound 1.3.6.1.4.1.10.2.2.4.2
A protocolBound trap is sent when a protocol is unbound from an interface.
TRAP-TYPE    
  ifIndex  
  ifDescr  
  ifType  
  nscTrapsProtBindIndex  

nscTrapsDecNetAreaNbr 1.3.6.1.4.1.10.2.2.4.3
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

physicalLinkUp 1.3.6.1.4.1.10.2.2.4.3
A physicalLinkUp trap is sent for devices that represent both a logical and physical device. The physicalLinkUp trap is sent when the physical device becomes active. The SNMP linkUp is sent when the logical device becomes active.
TRAP-TYPE    
  ifIndex  
  ifDescr  
  ifType  

nscTrapsDecNetNodeNbr 1.3.6.1.4.1.10.2.2.4.4
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

physicalLinkDown 1.3.6.1.4.1.10.2.2.4.4
A physicalLinkDown trap is sent for devices that represent both a logical and physical device. The physicalLinkDown trap is sent when the physical device becomes not active. The SNMP linkDown is sent when the logical device becomes not active.
TRAP-TYPE    
  ifIndex  
  ifDescr  
  ifType  

nscTrapsDecNetCircuitName 1.3.6.1.4.1.10.2.2.4.5
The name of a DECnet circuit.
OBJECT-TYPE    
  DisplayString SIZE(0..6)  

fddiWrap 1.3.6.1.4.1.10.2.2.4.5
A FDDI wrap trap indicates that a FDDI ring is broken and the signal path wraps through a device and out the parallel fiber. The trap also occures when the wrapped condition is relieved.
TRAP-TYPE    
  ifIndex  
  nscTrapsFddiSMTCFState  

nscTrapsDecNetEventReason 1.3.6.1.4.1.10.2.2.4.6
The reason that causes the routing event to happen. Possible reasons are: SYNC_LOST (0), DATA_ERRORS (1), UNEXPECTED_PKT_TYPE (2), ROUTING_UPDATE_CHECKSUM_ERROR (3), ADJ_ADDR_CHANGE (4), VERIF_RECV_TIMEOUT (5), VERSION_SKEW (6), ADJ_ADDR_OUT_OF_RANGE (7), ADJ_BLOCK_SIZE_TOO_SMALL (8), INVALID_VERIF_SEED_VALUE (9), ADJ_LIST_RECV_TIMEOUT (10), ADJ_LIST_RECV_INVALID_DATA (11), CALL_FAILED (12), VERIF_PASSWORD_REQ_FROM_PIII_NODE (13), DROPPED_BY_ADJ_NODE (14).
OBJECT-TYPE    
  DisplayString SIZE(1..256)  

vcpActive 1.3.6.1.4.1.10.2.2.4.6
This trap indicates that a VCP physical link just came up.
TRAP-TYPE    
  nscTrapsVcpPortName  
  nscTrapsVcpLogicalState  
  nscTrapsVcpPhysicalState  

nscTrapsDecNetReachStatus 1.3.6.1.4.1.10.2.2.4.7
The reachable status of a node or area.
OBJECT-TYPE    
  INTEGER reachable(1), unreachable(2)  

vcpInactive 1.3.6.1.4.1.10.2.2.4.7
This trap indicates that a VCP physical link just went down.
TRAP-TYPE    
  nscTrapsVcpPortName  
  nscTrapsVcpLogicalState  
  nscTrapsVcpPhysicalState  

nscTrapsVcpPortName 1.3.6.1.4.1.10.2.2.4.8
The name of the VCP port.
OBJECT-TYPE    
  DisplayString SIZE(0..12)  

vcpReconfig 1.3.6.1.4.1.10.2.2.4.8
This trap indicates that a VCP physical link is reconfiguring.
TRAP-TYPE    
  nscTrapsVcpPortName  
  nscTrapsVcpLogicalState  
  nscTrapsVcpPhysicalState  

nscTrapsVcpLogicalState 1.3.6.1.4.1.10.2.2.4.9
The logical state of a VCP port. The possible states are ACTIVE, DOWN, DISABLED.
OBJECT-TYPE    
  DisplayString SIZE(0..30)  

vcpBroken 1.3.6.1.4.1.10.2.2.4.9
This trap indicates that a VCP physical link lost connection with its remote end.
TRAP-TYPE    
  nscTrapsVcpPortName  
  nscTrapsVcpLogicalState  
  nscTrapsVcpPhysicalState  

nscTrapsVcpPhysicalState 1.3.6.1.4.1.10.2.2.4.10
The physical state of a VCP port. The possible states are Off, On, Broken_Cannot_IO, Broken_Purge, Broken_Reconfigure, Broken_Misconfigure.
OBJECT-TYPE    
  DisplayString SIZE(0..30)  

vcpMisconfigured 1.3.6.1.4.1.10.2.2.4.10
This trap indicates that a VCP physical link has detected different configuration on the remote end.
TRAP-TYPE    
  nscTrapsVcpPortName  

decNetCircDownFault 1.3.6.1.4.1.10.2.2.4.407
This trap shows that a fault has brought down the indicated DECnet circuit.
TRAP-TYPE    
  nscTrapsDecNetAreaNbr  
  nscTrapsDecNetNodeNbr  
  nscTrapsDecNetCircuitName  
  nscTrapsDecNetEventReason  

decNetCircDown 1.3.6.1.4.1.10.2.2.4.408
This trap indicates that the named DECnet circuit is down. (This trap is not supported.)
TRAP-TYPE    
  nscTrapsDecNetAreaNbr  
  nscTrapsDecNetNodeNbr  
  nscTrapsDecNetCircuitName  
  nscTrapsDecNetEventReason  

decNetCircUp 1.3.6.1.4.1.10.2.2.4.410
This trap indicates that a DECnet circuit has become enabled.
TRAP-TYPE    
  nscTrapsDecNetAreaNbr  
  nscTrapsDecNetNodeNbr  
  nscTrapsDecNetCircuitName  

decNetNodeReachChg 1.3.6.1.4.1.10.2.2.4.414
This trap reports a change in the nodes that can be reached. (This trap is not supported.)
TRAP-TYPE    
  nscTrapsDecNetNodeNbr  
  nscTrapsDecNetReachStatus  

decNetAdjUp 1.3.6.1.4.1.10.2.2.4.415
This trap indicates that a DECnet adjacent node just has come up.
TRAP-TYPE    
  nscTrapsDecNetAreaNbr  
  nscTrapsDecNetNodeNbr  
  nscTrapsDecNetCircuitName  

decNetAdjRejected 1.3.6.1.4.1.10.2.2.4.416
This trap indicates that an adjacent node has been rejected of communication, or become inactive. The reason could be either the numbers of broadcast (non)routers or the address of a node exceeds the ones in the router's configuartion.
TRAP-TYPE    
  nscTrapsDecNetAreaNbr  
  nscTrapsDecNetNodeNbr  
  nscTrapsDecNetCircuitName  
  nscTrapsDecNetEventReason  

decNetAreaReachChg 1.3.6.1.4.1.10.2.2.4.417
This trap reports a change in the areas that can be reached. (This trap is not supported.)
TRAP-TYPE    
  nscTrapsDecNetAreaNbr  
  nscTrapsDecNetReachStatus  

decNetAdjDown 1.3.6.1.4.1.10.2.2.4.418
This trap indicates that a adjacent node has come down or lost.
TRAP-TYPE    
  nscTrapsDecNetAreaNbr  
  nscTrapsDecNetNodeNbr  
  nscTrapsDecNetCircuitName  
  nscTrapsDecNetEventReason  

decNetDesignatedRouter 1.3.6.1.4.1.10.2.2.4.422
This trap reports a change in the designated router.
TRAP-TYPE    
  nscTrapsDecNetAreaNbr  
  nscTrapsDecNetNodeNbr  
  nscTrapsDecNetCircuitName