NTN-QOS-POLICY-EVOL-PIB

File: NTN-QOS-POLICY-EVOL-PIB.mib (26621 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
SNMP-FRAMEWORK-MIB POLICY-FRAMEWORK-PIB QOS-POLICY-IP-PIB
QOS-POLICY-802-PIB SYNOPTICS-ROOT-MIB

Imported symbols

Unsigned32 MODULE-IDENTITY OBJECT-TYPE
Integer32 MODULE-COMPLIANCE OBJECT-GROUP
RowStatus StorageType SnmpAdminString
PolicyInstanceId RoleCombination Dscp
QosInterfaceQueueCount QosIeee802Cos policy

Defined Objects

ntnQosPolicyEvolPib 1.3.6.1.4.1.45.4.7
The Nortel Network's PIB module containing evolved data definitions related to the base PIB modules (Framework, IP QoS, 802 QoS) produced by the IETF.
MODULE-IDENTITY    

ntnQosPolicyEvolPibClasses 1.3.6.1.4.1.45.4.7.1
OBJECT IDENTIFIER    

ntnQosInterfaceTypeTable 1.3.6.1.4.1.45.4.7.1.1
Interface type definitions. This class describes the types of interfaces that exist on the device. An interface type is denoted by its designated role identifier.
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosInterfaceTypeEntry

ntnQosInterfaceTypeEntry 1.3.6.1.4.1.45.4.7.1.1.1
An instance of this class describes the characteristics of a type of an interface. Interface type characteristics include a role combination identifier, an interface class designation and a filter capabilities attribute. An instance is required for each different unique role combination identifier which represents the different interface types that are operational in the device at any given time. The PEP does not report which specific interfaces have which characteristics.
OBJECT-TYPE    
  NtnQosInterfaceTypeEntry  

ntnQosInterfaceTypeId 1.3.6.1.4.1.45.4.7.1.1.1.1
An arbitrary integer index that uniquely identifies a instance of the ntnQosInterfaceType class. Class instances may not be contiguous.
OBJECT-TYPE    
  PolicyInstanceId  

ntnQosInterfaceTypeRoles 1.3.6.1.4.1.45.4.7.1.1.1.2
The role combination that is used to identify interfaces with the characteristics specified by the attributes of this class instance. Interface role combination identifiers are used within a number of classes to logically identify a physical set of interfaces to which policy rules and actions are applied. Role combination identifiers must exist in this table prior to being referenced in other class instances.
OBJECT-TYPE    
  RoleCombination  

ntnQosInterfaceTypeIfClass 1.3.6.1.4.1.45.4.7.1.1.1.3
A value describing the overall classification of traffic received on interfaces with the given role combination. Traffic received on trusted interfaces may be processed differently and be subject to different restrictions that traffic received on non-trusted interfaces. The treatment of traffic based on interface class is implementation dependent.
OBJECT-TYPE    
  INTEGER trusted(1), nonTrusted(2), unrestricted(3)  

ntnQosInterfaceTypeCapabilities 1.3.6.1.4.1.45.4.7.1.1.1.4
An enumeration of interface capabilities. Used by the PDP or network manager to select which policies and configuration it should push to the PEP.
OBJECT-TYPE    
  BITS other(0), inputIpClassification(1), outputIpClassification(2), input802Classification(3), output802Classification(4)  

ntnQosInterfaceTypeStorageType 1.3.6.1.4.1.45.4.7.1.1.1.5
The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This object may not be modified if the associated ntnQosInterfaceTypeStatus object is equal to active(1).
OBJECT-TYPE    
  StorageType  

ntnQosInterfaceTypeStatus 1.3.6.1.4.1.45.4.7.1.1.1.6
The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values is supported.
OBJECT-TYPE    
  RowStatus  

ntnQosQsetPriAssignmentTable 1.3.6.1.4.1.45.4.7.1.2
Supports the assignment of 802.1p user priority values to a queue for each interface with a specific queue set. There will be 8 instances of this class for each supported queue set.
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosQsetPriAssignmentEntry

ntnQosQsetPriAssignmentEntry 1.3.6.1.4.1.45.4.7.1.2.1
An instance of the ntnQosQsetPriAssignment class.
OBJECT-TYPE    
  NtnQosQsetPriAssignmentEntry  

ntnQosQsetPriAssignmentId 1.3.6.1.4.1.45.4.7.1.2.1.1
An index that is used to uniquely identify the instance of the ntnQosQsetPriAssignment class.
OBJECT-TYPE    
  PolicyInstanceId  

ntnQosQsetPriAssignmentQset 1.3.6.1.4.1.45.4.7.1.2.1.2
The queue set with which an interface must be configured to support the Pri-to-queue assignment described by this instance. The specified queue set must be defined in the qosIfQueueTable prior to being referenced by this entry. Otherwise a 'priAssociationUnknown(3)' error code will be returned.
OBJECT-TYPE    
  Integer32  

ntnQosQsetPriAssignmentPri 1.3.6.1.4.1.45.4.7.1.2.1.3
The 802.1p user priority to which this class instance applies.
OBJECT-TYPE    
  QosIeee802Cos  

ntnQosQsetPriAssignmentQueue 1.3.6.1.4.1.45.4.7.1.2.1.4
The specific queue, within the queue set that is associated with the interface set identified by the ntnQosQsetPriAssignmentRoles tag, on which traffic with the specified user priority, dictated by the ntnQosQsetPriAssignmentPri value, is placed. Failure to specify an appropriate queue results in a 'priAssociationConflict(4)' error indication being returned.
OBJECT-TYPE    
  QosInterfaceQueueCount  

ntnQosQsetPriAssignmentStorageType 1.3.6.1.4.1.45.4.7.1.2.1.5
The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This object may not be modified if the associated ntnQosQsetPriAssignmentStatus object is equal to active(1).
OBJECT-TYPE    
  StorageType  

ntnQosQsetPriAssignmentStatus 1.3.6.1.4.1.45.4.7.1.2.1.6
The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values is supported.
OBJECT-TYPE    
  RowStatus  

ntnQosQsetDscpAssignmentTable 1.3.6.1.4.1.45.4.7.1.3
Supports the assignment of DSCP values to a queue for each interface with a specific queue set. There will be 64 instances of this class for each supported queue set.
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosQsetDscpAssignmentEntry

ntnQosQsetDscpAssignmentEntry 1.3.6.1.4.1.45.4.7.1.3.1
An instance of the ntnQosQsetDscpAssignment class.
OBJECT-TYPE    
  NtnQosQsetDscpAssignmentEntry  

ntnQosQsetDscpAssignmentId 1.3.6.1.4.1.45.4.7.1.3.1.1
An index that is used to uniquely identify the instance of the ntnQosQsetDscpAssignment class.
OBJECT-TYPE    
  PolicyInstanceId  

ntnQosQsetDscpAssignmentQset 1.3.6.1.4.1.45.4.7.1.3.1.2
The queue set with which an interface must be configured to support the Dscp-to-queue assignment described by this instance. The specified queue set must be defined in the qosIfQueueTable prior to being referenced by this entry. Otherwise a 'priAssociationUnknown(3)' error code will be returned.
OBJECT-TYPE    
  Integer32  

ntnQosQsetDscpAssignmentDscp 1.3.6.1.4.1.45.4.7.1.3.1.3
The DSCP value to which this class instance applies.
OBJECT-TYPE    
  Dscp  

ntnQosQsetDscpAssignmentQueue 1.3.6.1.4.1.45.4.7.1.3.1.4
The specific queue, within the queue set that is associated with the interface set identified by the ntnQosQsetDscpAssignmentRoles tag, on which traffic with the specified user priority, dictated by the ntnQosQsetDscpAssignmentDscp value, is placed. Failure to specify an appropriate queue results in a 'priAssociationConflict(4)' error indication being returned.
OBJECT-TYPE    
  QosInterfaceQueueCount  

ntnQosQsetDscpAssignmentStorageType 1.3.6.1.4.1.45.4.7.1.3.1.5
The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This object may not be modified if the associated ntnQosQsetDscpAssignmentStatus object is equal to active(1).
OBJECT-TYPE    
  StorageType  

ntnQosQsetDscpAssignmentStatus 1.3.6.1.4.1.45.4.7.1.3.1.6
The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values is supported.
OBJECT-TYPE    
  RowStatus  

ntnQosShapingParamsTable 1.3.6.1.4.1.45.4.7.1.4
Supports the definition of shaping parameters that can be applied to individual flows. Shaping criteria is associated with a flow using the qosTargetShaper attribute of the qosTarget class.
OBJECT-TYPE    
  SEQUENCE OF  
    NtnQosShapingParamsEntry

ntnQosShapingParamsEntry 1.3.6.1.4.1.45.4.7.1.4.1
An instance of the ntnQosShapingParams class.
OBJECT-TYPE    
  NtnQosShapingParamsEntry  

ntnQosShapingParamsId 1.3.6.1.4.1.45.4.7.1.4.1.1
An index that is used to uniquely identify the instance of the ntnQosShapingParams class.
OBJECT-TYPE    
  PolicyInstanceId  

ntnQosShapingParamsRate 1.3.6.1.4.1.45.4.7.1.4.1.2
The maximum rate, in kilobits per second, at which traffic shaped using this rate criteria will be transmitted over a given period of time. Transmitted traffic may exceed this rate for short periods in accordance with the associated burst size. Typically, this value specifies the rate at which tokens are added to a token bucket used to shape flows. This object specifies a rate in kilobits per second units such that, for example, a value of 100 equates to a shaped flow being transmitted at a maximum rate of 100,000 bits per second.
OBJECT-TYPE    
  Unsigned32 0..'ffffffff'h  

ntnQosShapingParamsBurstSize 1.3.6.1.4.1.45.4.7.1.4.1.3
The maximum traffic burst size, in bytes, that can be transmitted without experiencing a shaping delay. Typically, this value represents the maximum number of tokens in a token bucket. Note that the value of this attribute may modified in an implementation dependent, such as being rounded down to an acceptable value, to account for system limitations.
OBJECT-TYPE    
  Unsigned32  

ntnQosShapingParamsQueueSize 1.3.6.1.4.1.45.4.7.1.4.1.4
The amount of traffic, in packets, that may exceed the maximum burst size and still be queued for transmission. This value specifies the size of a shaping queue that holds a flow's traffic that is being delayed for shaping purposes. The specified enumeration dictates whether one ('onePkt'), two ('twoPkts'), four ('fourPkts'), eight, ('eightPkts') or sixteen ('sixteenPkts') packets can be held in the shaping queue prior to transmission.
OBJECT-TYPE    
  INTEGER onePkt(1), twoPkts(2), fourPkts(3), eightPkts(4), sixteenPkts(5)  

ntnQosShapingParamsStorageType 1.3.6.1.4.1.45.4.7.1.4.1.5
The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This object may not be modified if the associated ntnQosQsetDscpAssignmentStatus object is equal to active(1).
OBJECT-TYPE    
  StorageType  

ntnQosShapingParamsStatus 1.3.6.1.4.1.45.4.7.1.4.1.6
The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values is supported.
OBJECT-TYPE    
  RowStatus  

ntnQosShapingParamsLabel 1.3.6.1.4.1.45.4.7.1.4.1.7
A label used to reference the entry in a textual manner.
OBJECT-TYPE    
  SnmpAdminString SIZE(0..32)  

ntnQosPolicyEvolPibConformance 1.3.6.1.4.1.45.4.7.2
OBJECT IDENTIFIER    

ntnQosPolicyEvolPibCompliances 1.3.6.1.4.1.45.4.7.2.1
OBJECT IDENTIFIER    

ntnQosPolicyEvolPibCompliance 1.3.6.1.4.1.45.4.7.2.1.1
Describes the requirements for conformance to the Nortel Networks QoS Policy Evolution PIB.
MODULE-COMPLIANCE    

ntnQosPolicyEvolPibGroups 1.3.6.1.4.1.45.4.7.2.2
OBJECT IDENTIFIER    

ntnQosInterfaceTypeGroup 1.3.6.1.4.1.45.4.7.2.2.1
Objects from the ntnQosInterfaceTypeExtTable.
OBJECT-GROUP    

ntnQosQsetPriAssignmentGroup 1.3.6.1.4.1.45.4.7.2.2.2
Objects from the ntnQosQsetPriAssignmentTable.
OBJECT-GROUP    

ntnQosQsetDscpAssignmentGroup 1.3.6.1.4.1.45.4.7.2.2.3
Objects from the ntnQosQsetDscpAssignmentTable.
OBJECT-GROUP    

ntnQosShapingParamsGroup 1.3.6.1.4.1.45.4.7.2.2.4
Objects from the ntnQosShapingParamsTable.
OBJECT-GROUP    

Defined Objects

NtnQosInterfaceTypeEntry  
SEQUENCE    
  PolicyInstanceId as ntnQosInterfaceTypeId  
  RoleCombination as ntnQosInterfaceTypeRoles  
  INTEGER as ntnQosInterfaceTypeIfClass  
  BITS as ntnQosInterfaceTypeCapabilities  
  StorageType as ntnQosInterfaceTypeStorageType  
  RowStatus as ntnQosInterfaceTypeStatus  

NtnQosQsetPriAssignmentEntry  
SEQUENCE    
  PolicyInstanceId as ntnQosQsetPriAssignmentId  
  Integer32 as ntnQosQsetPriAssignmentQset  
  QosIeee802Cos as ntnQosQsetPriAssignmentPri  
  QosInterfaceQueueCount as ntnQosQsetPriAssignmentQueue  
  StorageType as ntnQosQsetPriAssignmentStorageType  
  RowStatus as ntnQosQsetPriAssignmentStatus  

NtnQosQsetDscpAssignmentEntry  
SEQUENCE    
  PolicyInstanceId as ntnQosQsetDscpAssignmentId  
  Integer32 as ntnQosQsetDscpAssignmentQset  
  Dscp as ntnQosQsetDscpAssignmentDscp  
  QosInterfaceQueueCount as ntnQosQsetDscpAssignmentQueue  
  StorageType as ntnQosQsetDscpAssignmentStorageType  
  RowStatus as ntnQosQsetDscpAssignmentStatus  

NtnQosShapingParamsEntry  
SEQUENCE    
  PolicyInstanceId as ntnQosShapingParamsId  
  Unsigned32 as ntnQosShapingParamsRate  
  Unsigned32 as ntnQosShapingParamsBurstSize  
  INTEGER as ntnQosShapingParamsQueueSize  
  StorageType as ntnQosShapingParamsStorageType  
  RowStatus as ntnQosShapingParamsStatus  
  SnmpAdminString as ntnQosShapingParamsLabel