NetWare-Server-MIB

File: NetWare-Server-MIB.mib (92731 bytes)

Imported modules

RFC1155-SMI HOST-RESOURCES-MIB SNMPv2-TC
RFC-1212

Imported symbols

enterprises Counter TimeTicks
InternationalDisplayString KBytes DateAndTime
OBJECT-TYPE

Defined Objects

novell 1.3.6.1.4.1.23
OBJECT IDENTIFIER    

mibDoc 1.3.6.1.4.1.23.2
OBJECT IDENTIFIER    

nwServer 1.3.6.1.4.1.23.2.28
OBJECT IDENTIFIER    

nwSystem 1.3.6.1.4.1.23.2.28.1
OBJECT IDENTIFIER    

nwSysServerName 1.3.6.1.4.1.23.2.28.1.1
The physical name of this NetWare server.
OBJECT-TYPE    
  InternationalDisplayString SIZE(0..48)  

nwSysSerialNumber 1.3.6.1.4.1.23.2.28.1.2
The serial number of the instance of the NetWare Operating System running on this server.
OBJECT-TYPE    
  InternationalDisplayString  

nwSysInternalNetNum 1.3.6.1.4.1.23.2.28.1.3
The internal IPX network number of this server.
OBJECT-TYPE    
  IPXNetNumber  

nwSysServerUpTime 1.3.6.1.4.1.23.2.28.1.4
The time (in hundredths of a second) since this server was last restarted.
OBJECT-TYPE    
  TimeTicks  

nwSysOSSFTLevel 1.3.6.1.4.1.23.2.28.1.5
The System Fault Tolerance Level of the NetWare Operating System running on this server.
OBJECT-TYPE    
  INTEGER other(1), sftI(2), sftII(3), sftIII(4)  

nwSysOSMajorVer 1.3.6.1.4.1.23.2.28.1.6
The major version number of the NetWare Operating System running on this server.
OBJECT-TYPE    
  INTEGER  

nwSysOSMinorVer 1.3.6.1.4.1.23.2.28.1.7
The minor version number of the NetWare Operating System running on this server.
OBJECT-TYPE    
  INTEGER  

nwSysOSReleaseDate 1.3.6.1.4.1.23.2.28.1.8
The release date of the NetWare Operating System running on this server.
OBJECT-TYPE    
  DateAndTime  

nwSysOSDescription 1.3.6.1.4.1.23.2.28.1.9
A textual description of the NetWare Operating System running on this server.
OBJECT-TYPE    
  InternationalDisplayString SIZE(0..100)  

nwSysOSCopyright 1.3.6.1.4.1.23.2.28.1.10
The copyright string for the NetWare Operating System running on this server.
OBJECT-TYPE    
  InternationalDisplayString  

nwSysTime 1.3.6.1.4.1.23.2.28.1.11
The date and time kept by this server.
OBJECT-TYPE    
  DateAndTime  

nwSysTimeZone 1.3.6.1.4.1.23.2.28.1.12
The time zone in which this server resides. The string is in the same format as in the NetWare 'SET TIMEZONE' command.
OBJECT-TYPE    
  InternationalDisplayString SIZE(0..80)  

nwSysLoginState 1.3.6.1.4.1.23.2.28.1.13
The current login state of this Server.
OBJECT-TYPE    
  INTEGER notApplicable(1), enabled(2), disabled(3)  

nwSysLanguageID 1.3.6.1.4.1.23.2.28.1.14
The national language in use on this server.
OBJECT-TYPE    
  INTEGER other(1), canadianFrench(2), chinese(3), danish(4), dutch(5), english(6), finnish(7), french(8), german(9), italian(10), japanese(11), portuguese(14), russian(15), spanish(16), swedish(17)  

nwSysNMASerialNumber 1.3.6.1.4.1.23.2.28.1.15
The serial number of the instance of the NetWare Management Agent running on this server. Or, a zero-length string if not applicable.
OBJECT-TYPE    
  InternationalDisplayString  

nwSysNMACopiesAllowed 1.3.6.1.4.1.23.2.28.1.16
The maximum number of instances of the NMA with this serial number allowed by the license agreement. A value of 0 implies no limit.
OBJECT-TYPE    
  INTEGER  

nwSysDirectoryTree 1.3.6.1.4.1.23.2.28.1.17
The name of the NetWare directory services tree containing this server. Or, a zero-length string if not applicable.
OBJECT-TYPE    
  InternationalDisplayString  

nwSysBinderyContext 1.3.6.1.4.1.23.2.28.1.18
The container object(s) where the bindery services context(s) is set. Or, a zero-length string if not applicable.
OBJECT-TYPE    
  InternationalDisplayString  

nwSysServerDSName 1.3.6.1.4.1.23.2.28.1.19
The Directory Services full distinguished name of this NetWare server, or the zero-length string if not applicable.
OBJECT-TYPE    
  InternationalDisplayString  

nwSysDaylightSavingsStart 1.3.6.1.4.1.23.2.28.1.20
Start of daylight savings time. A language independent representation of the local date and time when the switch to Daylight Savings Time occurs on the server.
OBJECT-TYPE    
  DSTType  

nwSysDaylightSavingsEnd 1.3.6.1.4.1.23.2.28.1.21
End of daylight savings time. A language independent representation of the local date and time when the switch from Daylight Savings Time occurs on the server.
OBJECT-TYPE    
  DSTType  

nwSysDaylightSavingsOffset 1.3.6.1.4.1.23.2.28.1.22
The offset applied in time calculations when daylight savings is in effect. This is a signed quantity, and the units are seconds.
OBJECT-TYPE    
  INTEGER  

nwSysDaylightSavingsStatus 1.3.6.1.4.1.23.2.28.1.23
Indicates whether daylight savings time is applicable or not.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

nwFileSystem 1.3.6.1.4.1.23.2.28.2
OBJECT IDENTIFIER    

nwFSReads 1.3.6.1.4.1.23.2.28.2.1
The total number of file reads the file system has made since this server was started. This value provides a relative measure of server activity.
OBJECT-TYPE    
  Counter  

nwFSWrites 1.3.6.1.4.1.23.2.28.2.2
The total number of file writes the file system has made since this server was started. This value provides a relative measure of server activity.
OBJECT-TYPE    
  Counter  

nwFSReadKBytes 1.3.6.1.4.1.23.2.28.2.3
The total number of KBytes read by the file system. This value provides a measure of server activity.
OBJECT-TYPE    
  Counter  

nwFSWrittenKBytes 1.3.6.1.4.1.23.2.28.2.4
The total number of KBytes written by the file system. This value provides a measure of server activity.
OBJECT-TYPE    
  Counter  

nwFSCacheChecks 1.3.6.1.4.1.23.2.28.2.5
The total number of checks that have been made against the file cache.
OBJECT-TYPE    
  Counter  

nwFSCacheHits 1.3.6.1.4.1.23.2.28.2.6
The total number of times a file cache check has resulted in a hit.
OBJECT-TYPE    
  Counter  

nwFSOpenFiles 1.3.6.1.4.1.23.2.28.2.7
The number of open files in the file system.
OBJECT-TYPE    
  INTEGER  

nwFSMaxOpenFiles 1.3.6.1.4.1.23.2.28.2.8
The maximum number of open files allowed in the file system.
OBJECT-TYPE    
  INTEGER  

nwFSRecordLocks 1.3.6.1.4.1.23.2.28.2.9
The current number of record locks.
OBJECT-TYPE    
  INTEGER  

nwFSMaxRecordLocks 1.3.6.1.4.1.23.2.28.2.10
The maximum number of record locks allowed.
OBJECT-TYPE    
  INTEGER  

nwFSMaxSubdirectoryTreeDepth 1.3.6.1.4.1.23.2.28.2.11
The number of levels of subdirectories the OS supports.
OBJECT-TYPE    
  INTEGER  

nwFSMaxPercentOfVolumeUsedByDir 1.3.6.1.4.1.23.2.28.2.12
The percentage of a volume that may be used as directory space.
OBJECT-TYPE    
  INTEGER 0..100  

nwFSVolCount 1.3.6.1.4.1.23.2.28.2.13
The number of volumes listed in the volume table
OBJECT-TYPE    
  INTEGER  

nwFSVolTable 1.3.6.1.4.1.23.2.28.2.14
The volume table lists all the NetWare volumes, whether mounted or not ( see nwVolMounted for more details).
OBJECT-TYPE    
  SEQUENCE OF  
    NwFSVolEntry

nwFSVolEntry 1.3.6.1.4.1.23.2.28.2.14.1
An entry in the volume table describing a single NetWare Volume
OBJECT-TYPE    
  NwFSVolEntry  

nwVolID 1.3.6.1.4.1.23.2.28.2.14.1.1
A unique value for each NetWare volume on the server. The value for each volume must remain constant at least from one re-initialization of the agent to the next re- initialization.
OBJECT-TYPE    
  INTEGER 1..2147483647  

nwVolPhysicalName 1.3.6.1.4.1.23.2.28.2.14.1.2
The name of the physical volume (as opposed to any Directory Services (DS) name.
OBJECT-TYPE    
  InternationalDisplayString SIZE(0..64)  

nwVolSize 1.3.6.1.4.1.23.2.28.2.14.1.3
The size of the volume in KBytes.
OBJECT-TYPE    
  KBytes  

nwVolFree 1.3.6.1.4.1.23.2.28.2.14.1.4
The free space on the volume in KBytes. As this number approaches zero, the volume is running out of space for new or expanding files.
OBJECT-TYPE    
  KBytes  

nwVolFreeable 1.3.6.1.4.1.23.2.28.2.14.1.5
The amount of freeable space (in KBytes) being used by previously deleted files on this volume. The freeable space can be reclaimed as free space by purging deleted files.
OBJECT-TYPE    
  KBytes  

nwVolNonFreeable 1.3.6.1.4.1.23.2.28.2.14.1.6
The non-freeable space (in KBytes) on the volume. This is the space being used by deleted files that cannot be purged. Non-freeable space can be reclaimed as free space when the deleted files become eligible to be purged.
OBJECT-TYPE    
  KBytes  

nwVolBlockSize 1.3.6.1.4.1.23.2.28.2.14.1.7
The block size on the volume in bytes.
OBJECT-TYPE    
  INTEGER  

nwVolMounted 1.3.6.1.4.1.23.2.28.2.14.1.8
The mount state of the volume. Note that if the volume is not mounted, all the other values in the table, except nwVolName, are invalid. Writing a value of mounted(1) to this object will cause the volume to be mounted if it is currently dismounted. Writing a value of dismounted(2) to this object will cause the volume to be dismounted if the volume is currently mounted.
OBJECT-TYPE    
  INTEGER mounted(1), dismounted(2)  

nwVolAttributes 1.3.6.1.4.1.23.2.28.2.14.1.9
A value that represents the attributes of the volume. The value is a sum. This value initially takes the value zero, then for each attribute that is enabled on the volume, 2 raised to a power is added to the sum. The powers are according to the following table: Attribute Power Block Suballocation 0 File Compression 1 Data Migration 2 Auditing 3 Read Only 4 For example, a read-only volume with suballocation enabled would have a value of 17 (2**4 + 2**0).
OBJECT-TYPE    
  INTEGER 0..31  

nwVolNameSpaces 1.3.6.1.4.1.23.2.28.2.14.1.10
A value representing all the name spaces supported by this volume. The value is a sum. This value initially takes the value zero, then for each name space that is supported by the volume, 2 raised to a power is added to the sum. The powers are according to the following table: Name Space Power DOS 0 MAC 1 NFS 2 FTAM 3 OS/2 4 NT 5 For example, a volume supporting both the DOS and MAC name spaces would have a value of 3 (2**0 + 2**1).
OBJECT-TYPE    
  INTEGER 0..63  

nwVolTotalDirEntries 1.3.6.1.4.1.23.2.28.2.14.1.11
The total number of directory table entries available on this volume.
OBJECT-TYPE    
  INTEGER  

nwVolUsedDirEntries 1.3.6.1.4.1.23.2.28.2.14.1.12
The number of directory table entries that are currently being used on this volume.
OBJECT-TYPE    
  INTEGER  

nwVolSegmentCount 1.3.6.1.4.1.23.2.28.2.14.1.13
The number of segments comprising this volume.
OBJECT-TYPE    
  INTEGER  

nwVolDSName 1.3.6.1.4.1.23.2.28.2.14.1.14
The full Directory Services distinguished name for the volume, or the zero-length string if not applicable.
OBJECT-TYPE    
  InternationalDisplayString  

nwVolFileSystemID 1.3.6.1.4.1.23.2.28.2.14.1.15
The type of the file system on the volume.
OBJECT-TYPE    
  INTEGER other(1), unknown(2), netWareVolume(3), nfsVolume(4)  

nwVolFileSystemName 1.3.6.1.4.1.23.2.28.2.14.1.16
If remote, the remote mount point; e.g. va:/usr/x If local, the zero length string.
OBJECT-TYPE    
  InternationalDisplayString  

nwFSOpenFileTable 1.3.6.1.4.1.23.2.28.2.15
A table of all open files on the server. If a file is opened by more than one connection, multiple entries for the same file will appear in the table.
OBJECT-TYPE    
  SEQUENCE OF  
    NwFSOpenFileEntry

nwFSOpenFileEntry 1.3.6.1.4.1.23.2.28.2.15.1
An entry in the Open File table providing information about a single open file.
OBJECT-TYPE    
  NwFSOpenFileEntry  

nwOfileVolID 1.3.6.1.4.1.23.2.28.2.15.1.1
A number that uniquely identifies a NetWare volume. The value of this object for a particular volume has the same value as the nwVolID object for the same volume.
OBJECT-TYPE    
  INTEGER 1..2147483647  

nwOfileDirectoryNumber 1.3.6.1.4.1.23.2.28.2.15.1.2
A number that uniquely identifies an open file within a NetWare volume.
OBJECT-TYPE    
  INTEGER  

nwOfileConnection 1.3.6.1.4.1.23.2.28.2.15.1.3
The number of the connection that opened the file.
OBJECT-TYPE    
  INTEGER  

nwOfileVolumeName 1.3.6.1.4.1.23.2.28.2.15.1.4
The physical name of the NetWare volume containing the open file.
OBJECT-TYPE    
  InternationalDisplayString SIZE(0..64)  

nwOfileName 1.3.6.1.4.1.23.2.28.2.15.1.5
The name of the open file including the directory path.
OBJECT-TYPE    
  InternationalDisplayString SIZE(0..254)  

nwOfileLoginName 1.3.6.1.4.1.23.2.28.2.15.1.6
The name of the user (if any) who opened the file. If the file was opened by the system or by an NLM, etc., nwOfileLoginName will be the zero-length string.
OBJECT-TYPE    
  InternationalDisplayString  

nwUsers 1.3.6.1.4.1.23.2.28.3
OBJECT IDENTIFIER    

nwUserCount 1.3.6.1.4.1.23.2.28.3.1
The number of entries in the User Account Table.
OBJECT-TYPE    
  INTEGER  

nwLoginCount 1.3.6.1.4.1.23.2.28.3.2
The number of licensed connections (logins) in this file server.
OBJECT-TYPE    
  INTEGER  

nwMaxLogins 1.3.6.1.4.1.23.2.28.3.3
The maximum number of licensed connections (logins) supported by this file server. Zero if unlimited.
OBJECT-TYPE    
  INTEGER  

nwConnectionCount 1.3.6.1.4.1.23.2.28.3.4
The number of entries in the Connection Table. The current number of connections to this file server(including connection 0 (zero), the system connection).
OBJECT-TYPE    
  INTEGER  

nwPeakRemoteConnections 1.3.6.1.4.1.23.2.28.3.5
The peak number of remote stations that have simultaneously connected to this server. Note that this number does not include connections made by the server itself, nor NLMs running on the server.
OBJECT-TYPE    
  INTEGER  

nwMaxConnections 1.3.6.1.4.1.23.2.28.3.6
The maximum number of connections supported by this file server. Zero if unlimited.
OBJECT-TYPE    
  INTEGER  

nwNLMConnections 1.3.6.1.4.1.23.2.28.3.7
The current number of logged in connections used by the system.
OBJECT-TYPE    
  INTEGER  

nwConnectionTable 1.3.6.1.4.1.23.2.28.3.8
The Connection Table lists all connections used; including those by Workstations, NLMs, and Attachments. Connection 0 (zero) is used by the system.
OBJECT-TYPE    
  SEQUENCE OF  
    NwConnectionEntry

nwConnectionEntry 1.3.6.1.4.1.23.2.28.3.8.1
An entry in the connections table provides information about a single connection
OBJECT-TYPE    
  NwConnectionEntry  

nwConnectionNumber 1.3.6.1.4.1.23.2.28.3.8.1.1
The connection number. Connection 0 (zero) is used by the system.
OBJECT-TYPE    
  INTEGER  

nwConnectionLoginName 1.3.6.1.4.1.23.2.28.3.8.1.2
The login name (Directory Services full distinguished name where appropriate). Zero-length string if not applicable.
OBJECT-TYPE    
  InternationalDisplayString  

nwConnectionTransportDomain 1.3.6.1.4.1.23.2.28.3.8.1.3
The transport domain of the connection.
OBJECT-TYPE    
  TransportDomain  

nwConnectionTransportAddress 1.3.6.1.4.1.23.2.28.3.8.1.4
The transport address of the connection.
OBJECT-TYPE    
  TransportAddress  

nwConnectionTime 1.3.6.1.4.1.23.2.28.3.8.1.5
The date and time the connection was established.
OBJECT-TYPE    
  DateAndTime  

nwConnectionReadKBytes 1.3.6.1.4.1.23.2.28.3.8.1.6
The number of KBytes the connection has read since it was established.
OBJECT-TYPE    
  Counter  

nwConnectionWrittenKBytes 1.3.6.1.4.1.23.2.28.3.8.1.7
The number of KBytes the connection has written since it was established.
OBJECT-TYPE    
  Counter  

nwConnectionNcpRequests 1.3.6.1.4.1.23.2.28.3.8.1.8
The number of NCP Requests the connection has made since it was established.
OBJECT-TYPE    
  Counter  

nwConnectionFilesOpen 1.3.6.1.4.1.23.2.28.3.8.1.9
The number of files that are currently opened by the connection.
OBJECT-TYPE    
  INTEGER  

nwConnectionRecordsLocked 1.3.6.1.4.1.23.2.28.3.8.1.10
The number of file records that are currently locked by the connection.
OBJECT-TYPE    
  INTEGER  

nwConnectionPrivilege 1.3.6.1.4.1.23.2.28.3.8.1.11
A value that represents the connection's login privileges. The value is a sum. This value initially takes the value zero, then for each privilege that the connection has, 2 raised to a power is added to the sum. The powers are according to the following table: Privilege Power Supervisor 0 Operator 1 Auditor 2 High_Privilege 3 Second_Authentication 4 Second_High_Privilege 5 For example, a user with both Supervisor and Auditor privileges would have a value of 5 (2**0 + 2**2)
OBJECT-TYPE    
  INTEGER 0..63  

nwConnectionStatus 1.3.6.1.4.1.23.2.28.3.8.1.12
A value that represents the login status of the user. The value is a sum. This value initially takes the value zero, then for each status that the user has, 2 raised to a power is added to the sum. The powers are according to the following table: Status Power Not logged in 0 Logged in 1 Need security change 2 MacStation 3 Connection abort 4 Audited 5 Authenticated temporary 6 Audit connection recorded 7 DS audit connection recorded 8 Logout in progress 9 For example a logged in user who needs a security change would have a value of 6 (2**1 + 2**2).
OBJECT-TYPE    
  INTEGER 0..1023  

nwQueue 1.3.6.1.4.1.23.2.28.4
OBJECT IDENTIFIER    

nwQueueCount 1.3.6.1.4.1.23.2.28.4.1
The number of active queues on this server.
OBJECT-TYPE    
  INTEGER  

nwQueueTable 1.3.6.1.4.1.23.2.28.4.2
The Queue table lists all the active NetWare queues including: print, job and archive queues on this server.
OBJECT-TYPE    
  SEQUENCE OF  
    NwQueueEntry

nwQueueEntry 1.3.6.1.4.1.23.2.28.4.2.1
An entry in the Queue table provides information about a single NetWare queue.
OBJECT-TYPE    
  NwQueueEntry  

nwQID 1.3.6.1.4.1.23.2.28.4.2.1.1
A unique value for each NetWare queue on the server. The value for each queue must remain constant at least from one re-initialization of the agent to the next re- initialization.
OBJECT-TYPE    
  INTEGER 1..2147483647  

nwQName 1.3.6.1.4.1.23.2.28.4.2.1.2
The queue name (Directory Services full distinguished name where appropriate). Zero-length string if not applicable.
OBJECT-TYPE    
  InternationalDisplayString  

nwQType 1.3.6.1.4.1.23.2.28.4.2.1.3
The type of the queue.
OBJECT-TYPE    
  INTEGER other(1), printQueue(2), archiveQueue(3), jobQueue(4)  

nwQAddJobState 1.3.6.1.4.1.23.2.28.4.2.1.4
This value indicates whether more jobs can be added to this queue. A value of canAddJobs(1) indicates more jobs can be added. A value of cannotAddJobs(2) indicates more jobs cannot be added.
OBJECT-TYPE    
  INTEGER canAddJobs(1), cannotAddJobs(2)  

nwQAttachState 1.3.6.1.4.1.23.2.28.4.2.1.5
This value indicates whether queue servers can attach to this queue. A value of canAttach(1) indicates a queue server can attach. A value of cannotAttach(2) indicates a queue server cannot attach.
OBJECT-TYPE    
  INTEGER canAttach(1), cannotAttach(2)  

nwQServiceJobState 1.3.6.1.4.1.23.2.28.4.2.1.6
This value indicates whether the queue can service jobs. A value of canService(1) indicates that the queue can service jobs. A value of cannotService(2) indicates the queue cannot service jobs.
OBJECT-TYPE    
  INTEGER canService(1), cannotService(2)  

nwQDirVolName 1.3.6.1.4.1.23.2.28.4.2.1.7
The physical name of the volume, where the directory created for this queue resides.
OBJECT-TYPE    
  InternationalDisplayString SIZE(0..64)  

nwQNumJobEntries 1.3.6.1.4.1.23.2.28.4.2.1.8
The number of job entries in the queue.
OBJECT-TYPE    
  INTEGER  

nwQNumAssignedServers 1.3.6.1.4.1.23.2.28.4.2.1.9
The number of servers assigned to the queue.
OBJECT-TYPE    
  INTEGER  

nwQueueJobTable 1.3.6.1.4.1.23.2.28.4.3
The Queue Job table lists all the jobs for all the active queues defined on this server QMS creates a file for each job. The name of that file will be Q.NNN where XXXX is the last 4 digits of nwQJobQID and NNN is the job number. Therefore the Q Job File name can be calculated and will not be in the table.
OBJECT-TYPE    
  SEQUENCE OF  
    NwQueueJobEntry

nwQueueJobEntry 1.3.6.1.4.1.23.2.28.4.3.1
An entry in the Queue Job table provides information about a particular job in a particular queue.
OBJECT-TYPE    
  NwQueueJobEntry  

nwQJobQID 1.3.6.1.4.1.23.2.28.4.3.1.1
A number that uniquely identifies a NetWare queue. The value of this object for a particular queue has the same value as the nwQID object for the same queue.
OBJECT-TYPE    
  INTEGER 1..2147483647  

nwQJobNumber 1.3.6.1.4.1.23.2.28.4.3.1.2
The job number.
OBJECT-TYPE    
  INTEGER  

nwQJobDescription 1.3.6.1.4.1.23.2.28.4.3.1.3
The description of the queue job.
OBJECT-TYPE    
  InternationalDisplayString SIZE(0..50)  

nwQJobEntryDateTime 1.3.6.1.4.1.23.2.28.4.3.1.4
The entry date and time.
OBJECT-TYPE    
  DateAndTime  

nwQJobPosition 1.3.6.1.4.1.23.2.28.4.3.1.5
The order in the queue.
OBJECT-TYPE    
  INTEGER  

nwQJobSize 1.3.6.1.4.1.23.2.28.4.3.1.6
The size of the job file in bytes.
OBJECT-TYPE    
  INTEGER  

nwQJobControlFlags 1.3.6.1.4.1.23.2.28.4.3.1.7
A value representing the job control flags. The value is a sum. This value initially takes the value zero, then for each job control flag that is set, 2 raised to a power is added to the sum. The powers are according to the following table: 8h Service Auto-Start 10h Execute 20h Entry Open 40h User Hold 80h Operator Hold
OBJECT-TYPE    
  INTEGER  

nwQJobUserName 1.3.6.1.4.1.23.2.28.4.3.1.8
The name of the user who submitted the job (Directory Services full distinguished name where appropriate). Zero-length string if not applicable.
OBJECT-TYPE    
  InternationalDisplayString  

nwQJobTargetServerName 1.3.6.1.4.1.23.2.28.4.3.1.9
The target server name (Directory Services full distinguished name where appropriate).. The zero length string will be returned for 'Any Server'.
OBJECT-TYPE    
  InternationalDisplayString  

nwQJobTargetDateTime 1.3.6.1.4.1.23.2.28.4.3.1.10
The target date and time. When the job is to be printed. A job may be first in queue but may not print because this is set to some other time.
OBJECT-TYPE    
  DateAndTime  

nwQJobServerName 1.3.6.1.4.1.23.2.28.4.3.1.11
The server currently processing the job (Directory Services full distinguished name where appropriate).. If the job is not being handled currently, this field will be a zero-length string.
OBJECT-TYPE    
  InternationalDisplayString  

nwQueueServerTable 1.3.6.1.4.1.23.2.28.4.4
The Queue Server Table lists all the assigned servers for all the active NetWare queues on this instrumented server. For each active queue on the server, zero or more entries will exist, one for each server assigned to service that particular queue.
OBJECT-TYPE    
  SEQUENCE OF  
    NwQueueServerEntry

nwQueueServerEntry 1.3.6.1.4.1.23.2.28.4.4.1
An entry in the Queue Server table provides information about the assignment of a particular server to a particular queue.
OBJECT-TYPE    
  NwQueueServerEntry  

nwQServerQID 1.3.6.1.4.1.23.2.28.4.4.1.1
A number that uniquely identifies a NetWare queue. The value of this object for a particular queue has the same value as the nwQID object for the same queue.
OBJECT-TYPE    
  INTEGER 1..2147483647  

nwQServerID 1.3.6.1.4.1.23.2.28.4.4.1.2
A unique value for each server servicing this queue. The value for each server must remain constant at least from one re-initialization of the agent to the next re- initialization.
OBJECT-TYPE    
  INTEGER 1..2147483647  

nwQServerName 1.3.6.1.4.1.23.2.28.4.4.1.3
The name of a queue server servicing this queue (Directory Services full distinguished name where appropriate). Zero-length string if not applicable..
OBJECT-TYPE    
  InternationalDisplayString  

nwQServerStatus 1.3.6.1.4.1.23.2.28.4.4.1.4
The status of the Queue Server.
OBJECT-TYPE    
  INTEGER unknown(1), active(2), inactive(3)  

nwOdi 1.3.6.1.4.1.23.2.28.5
OBJECT IDENTIFIER    

nwOdiLslEnqSendCount 1.3.6.1.4.1.23.2.28.5.1
The Link Support Layer's Enqueued Send Count, this is the current number of send packets that have been placed in a send queue.
OBJECT-TYPE    
  INTEGER  

nwOdiOsPktRcvBuffer 1.3.6.1.4.1.23.2.28.5.2
The current number of packet receive buffers being used by the operating system.
OBJECT-TYPE    
  INTEGER  

nwOdiOsMaxPktRcvBuffers 1.3.6.1.4.1.23.2.28.5.3
The maximum number of packet receive buffers that the operating system can allocate. This object is settable and can also be set through the nwSetParamTable.
OBJECT-TYPE    
  INTEGER  

nwOdiOsMinPktRcvBuffers 1.3.6.1.4.1.23.2.28.5.4
The minimum number of packet receive buffers that the operating system can allocate. This value can only be changed at startup time from STARTUP.NCF; therefore it is settable only through the nwSetParamTable.
OBJECT-TYPE    
  INTEGER  

nwSft3 1.3.6.1.4.1.23.2.28.6
OBJECT IDENTIFIER    

nwSft3Engine 1.3.6.1.4.1.23.2.28.6.1
The type of the this engine.
OBJECT-TYPE    
  EngineType  

nwSft3EngineState 1.3.6.1.4.1.23.2.28.6.2
The state of this engine. Note the msEngine does not know its state and thus will always be unknown(1).
OBJECT-TYPE    
  INTEGER unknown(1), synchronizing(2), mirrored(3), noSecondary(4), down(5)  

nwSft3EngineTable 1.3.6.1.4.1.23.2.28.6.3
Information about each engine which comprises an SFT- III server.
OBJECT-TYPE    
  SEQUENCE OF  
    NwSft3EngineEntry

nwSft3EngineEntry 1.3.6.1.4.1.23.2.28.6.3.1
Information about a particular engine in an SFT-III server.
OBJECT-TYPE    
  NwSft3EngineEntry  

nwSft3EngineType 1.3.6.1.4.1.23.2.28.6.3.1.1
The type of the engine.
OBJECT-TYPE    
  EngineType  

nwSft3EngineName 1.3.6.1.4.1.23.2.28.6.3.1.2
The name of this engine.
OBJECT-TYPE    
  InternationalDisplayString  

nwSft3EngineInternalNetNum 1.3.6.1.4.1.23.2.28.6.3.1.3
The internal IPX network number of this server.
OBJECT-TYPE    
  IPXNetNumber  

nwNCP 1.3.6.1.4.1.23.2.28.7
OBJECT IDENTIFIER    

nwNCPIPXChecksums 1.3.6.1.4.1.23.2.28.7.1
Controls NCP IPX checksumming.
OBJECT-TYPE    
  INTEGER noChecksums(1), checksumIfEnabledAtClient(2), requireChecksums(3)  

nwNCPPacketSignatures 1.3.6.1.4.1.23.2.28.7.2
The security level currently in force on this server.
OBJECT-TYPE    
  INTEGER serverNeverSigns(1), serverSignsOnClientRequest(2), serverSignsIfClientCapable(3), serverMandatesSigning(4)  

nwNCPNumNCPReqs 1.3.6.1.4.1.23.2.28.7.3
Number of NCP Requests.
OBJECT-TYPE    
  Counter  

nwNCPUseCount 1.3.6.1.4.1.23.2.28.7.4
NCP station in use count.
OBJECT-TYPE    
  INTEGER  

nwNCPPeakUseCount 1.3.6.1.4.1.23.2.28.7.5
NCP peak station in use count.
OBJECT-TYPE    
  INTEGER  

nwNCPForgedPkts 1.3.6.1.4.1.23.2.28.7.6
The count of NCP requests that were forged packets.
OBJECT-TYPE    
  Counter  

nwNCPBeingProcesseds 1.3.6.1.4.1.23.2.28.7.7
The count of NCP requests that were already being processed.
OBJECT-TYPE    
  Counter  

nwNCPNoAvailConns 1.3.6.1.4.1.23.2.28.7.8
The count of NCP requests that were not processed because there were no available connections.
OBJECT-TYPE    
  Counter  

nwNCPIPXChecksumErrs 1.3.6.1.4.1.23.2.28.7.9
NCP IPX checksum error count.
OBJECT-TYPE    
  Counter  

nwNCPInvalidPacketSigs 1.3.6.1.4.1.23.2.28.7.10
NCP invalid packet signature error count.
OBJECT-TYPE    
  Counter  

nwNCPExtNumReg 1.3.6.1.4.1.23.2.28.7.11
Number of NCP extensions Registered.
OBJECT-TYPE    
  INTEGER  

nwNCPExtInvalidReqs 1.3.6.1.4.1.23.2.28.7.12
Invalid NCP Extensions Requests.
OBJECT-TYPE    
  Counter  

nwWatchdog 1.3.6.1.4.1.23.2.28.8
OBJECT IDENTIFIER    

nwWDTimeBeforeFirstPkt 1.3.6.1.4.1.23.2.28.8.1
The time before the first Watchdog Packet in seconds.
OBJECT-TYPE    
  INTEGER  

nwWDTimeBetweenPkts 1.3.6.1.4.1.23.2.28.8.2
The time between Watchdog Packets in seconds.
OBJECT-TYPE    
  Seconds  

nwWDNumPktsToSend 1.3.6.1.4.1.23.2.28.8.3
The number of Watchdog Packets to Send.
OBJECT-TYPE    
  INTEGER  

nwWDCurrentState 1.3.6.1.4.1.23.2.28.8.4
The current Watchdog State. Note: this is only available in 4.0, will be unknown in 3.11
OBJECT-TYPE    
  INTEGER unknown(1), waiting(2), sendingPackets(3), clearingStations(4)  

nwWDNotifyConsoleFlag 1.3.6.1.4.1.23.2.28.8.5
The Watchdog Notify Console Flag.
OBJECT-TYPE    
  INTEGER doNotNotify(1), notify(2)  

nwNLM 1.3.6.1.4.1.23.2.28.9
OBJECT IDENTIFIER    

nwNLMTable 1.3.6.1.4.1.23.2.28.9.1
The nwNLMTable augments the hrSWRunTable in the Host Resources MIB to provide additional NetWare specific information.
OBJECT-TYPE    
  SEQUENCE OF  
    NwNLMEntry

nwNLMEntry 1.3.6.1.4.1.23.2.28.9.1.1
An entry in the NLM table provides additional information about a particular NLM.
OBJECT-TYPE    
  NwNLMEntry  

nwNLMIndex 1.3.6.1.4.1.23.2.28.9.1.1.1
A number that uniquely identifies an NLM. The value of this object for a particular NLM has the same value as the hrSWRunIndex object, defined in the HOST- RESOURCES-MIB, for the same NLM.
OBJECT-TYPE    
  INTEGER 1..2147483647  

nwNLMName 1.3.6.1.4.1.23.2.28.9.1.1.2
The name of the NLM.
OBJECT-TYPE    
  InternationalDisplayString SIZE(0..48)  

nwNLMDescription 1.3.6.1.4.1.23.2.28.9.1.1.3
A text string that describes this NLM.
OBJECT-TYPE    
  InternationalDisplayString SIZE(0..100)  

nwNLMTotalMemory 1.3.6.1.4.1.23.2.28.9.1.1.4
The total memory, in bytes, used by this NLM. This is a composite total of Short Term Memory, Semi-Permanent Memory, and Non-movable Cache Memory allocated by the NLM, plus the sizes of the code and data sections of this instance of an NLM.
OBJECT-TYPE    
  INTEGER  

nwNLMCopyright 1.3.6.1.4.1.23.2.28.9.1.1.5
The copyright string for this NLM.
OBJECT-TYPE    
  InternationalDisplayString  

nwNLMProtectionDomain 1.3.6.1.4.1.23.2.28.9.1.1.6
The protection level at which this NLM is executing.
OBJECT-TYPE    
  INTEGER osDomain(1), protectedDomain(2)  

nwNLMMajorVer 1.3.6.1.4.1.23.2.28.9.1.1.7
The major version number of this NLM.
OBJECT-TYPE    
  INTEGER  

nwNLMMinorVer 1.3.6.1.4.1.23.2.28.9.1.1.8
The minor version number of this NLM.
OBJECT-TYPE    
  INTEGER  

nwNLMRevision 1.3.6.1.4.1.23.2.28.9.1.1.9
The revision level of this NLM.
OBJECT-TYPE    
  INTEGER  

nwNLMReleaseDate 1.3.6.1.4.1.23.2.28.9.1.1.10
The date and time this NLM was released
OBJECT-TYPE    
  DateAndTime  

nwSetParams 1.3.6.1.4.1.23.2.28.10
OBJECT IDENTIFIER    

nwSetCategoryTable 1.3.6.1.4.1.23.2.28.10.1
A table of NetWare SET parameter categories
OBJECT-TYPE    
  SEQUENCE OF  
    NwSetCategoryEntry

nwSetCategoryEntry 1.3.6.1.4.1.23.2.28.10.1.1
A NetWare SET parameter category
OBJECT-TYPE    
  NwSetCategoryEntry  

nwSetCategoryIndex 1.3.6.1.4.1.23.2.28.10.1.1.1
A unique value for each category of SET commands
OBJECT-TYPE    
  INTEGER 1..65535  

nwSetCategoryName 1.3.6.1.4.1.23.2.28.10.1.1.2
A descriptive name of this category of SET commands
OBJECT-TYPE    
  InternationalDisplayString  

nwSetParamTable 1.3.6.1.4.1.23.2.28.10.2
A table of the NetWare SET parameters. This table emulates the NetWare SET command. Note that some of the parameters can also be set through other MIB objects
OBJECT-TYPE    
  SEQUENCE OF  
    NwSetParamEntry

nwSetParamEntry 1.3.6.1.4.1.23.2.28.10.2.1
An entry in the SET parameter table provides information about a particular parameter.
OBJECT-TYPE    
  NwSetParamEntry  

nwSetParamCategoryIndex 1.3.6.1.4.1.23.2.28.10.2.1.1
A number that uniquely identifies a Set parameter category. The value of this object for a particular category has the same value as the nwSetCategoryIndex object for the same category.
OBJECT-TYPE    
  INTEGER 1..65535  

nwSetParamIndex 1.3.6.1.4.1.23.2.28.10.2.1.2
An index which uniquely identifies this set parameter within the category
OBJECT-TYPE    
  INTEGER 1..65535  

nwSetParamName 1.3.6.1.4.1.23.2.28.10.2.1.3
The name of the settable parameter
OBJECT-TYPE    
  InternationalDisplayString  

nwSetParamType 1.3.6.1.4.1.23.2.28.10.2.1.4
The type of the parameter. All types are integer- valued except 'string', which is string-valued. number: integer boolean: 0 == FALSE, non-zero == TRUE ticks: 1 tick == 3600/65535 == approx 55 millisecs blockShift: integer timeOffset: [+|-]hh:mm:ss converted to seconds string: character string trigger: integer
OBJECT-TYPE    
  INTEGER number(1), boolean(2), ticks(3), blockShift(4), timeOffset(5), string(6), trigger(7)  

nwSetParamValueInteger 1.3.6.1.4.1.23.2.28.10.2.1.5
The current value of the parameter if integer-valued. Zero otherwise.
OBJECT-TYPE    
  INTEGER  

nwSetParamValueString 1.3.6.1.4.1.23.2.28.10.2.1.6
The current value of the parameter if string-valued. The zero-length string otherwise.
OBJECT-TYPE    
  InternationalDisplayString  

nwSetParamLowerLimit 1.3.6.1.4.1.23.2.28.10.2.1.7
The lower limit of the parameter if integer-valued.
OBJECT-TYPE    
  INTEGER  

nwSetParamUpperLimit 1.3.6.1.4.1.23.2.28.10.2.1.8
The upper limit of the parameter if integer-valued. The maximum length of the string if string-valued.
OBJECT-TYPE    
  INTEGER  

nwSetParamDescrLength 1.3.6.1.4.1.23.2.28.10.2.1.9
The total length (in octets) of the parameter description string, which can be retrieved in segments from the nwSetDescrTable.
OBJECT-TYPE    
  INTEGER  

nwSetParamMode 1.3.6.1.4.1.23.2.28.10.2.1.10
A value defining how and when the command takes effect. The value is a sum. This value initially takes the value zero, then for each place the parameter can be set from, 2 raised to a power is added to the sum. The powers are according to the following table: Set From Power Console 0 AUTOEXEC.NCF 1 STARTUP.NCF 2 For example, a parameter that can be set from either the console or AUTOEXEC would have a value of 3 (2**0 + 2**1). On a read, a bit will be set for each place the parameter can be set from. On a write, bits should be set to specify where the set command should be placed. If nwSetParamValue is written without nwSetParam also being set in the same PDU, the parameter will be set as if at the console; unless it is a parameter which can only be set in STARTUP.NCF in which case an error will be returned
OBJECT-TYPE    
  INTEGER 0..7  

nwSetDescrTable 1.3.6.1.4.1.23.2.28.10.3
A table of description string segments for each NetWare SET parameter. This table allows for long description strings to be retrieved in segments. A complete description string can be reconstituted by concatenating the ordered set of string segments. The length of the complete string is available through the nwSetParamTable.
OBJECT-TYPE    
  SEQUENCE OF  
    NwSetDescrEntry

nwSetDescrEntry 1.3.6.1.4.1.23.2.28.10.3.1
An entry in the SET description table contains one segment of a NetWare SET parameter description string. The complete description string can be reconstituted by concatenating the ordered set of string segments. The length of the complete string is available through the nwSetParamTable.
OBJECT-TYPE    
  NwSetDescrEntry  

nwSetDescrCategoryIndex 1.3.6.1.4.1.23.2.28.10.3.1.1
A number that uniquely identifies a Set parameter category. The value of this object for a particular category has the same value as the nwSetCategoryIndex object for the same category.
OBJECT-TYPE    
  INTEGER 1..65535  

nwSetDescrParamIndex 1.3.6.1.4.1.23.2.28.10.3.1.2
A number that uniquely identifies a Set parameter. The value of this object for a particular parameter has the same value as the nwSetParamIndex object for the same parameter.
OBJECT-TYPE    
  INTEGER 1..65535  

nwSetDescrIndex 1.3.6.1.4.1.23.2.28.10.3.1.3
An ordinal that indicates this segment's relative position in the complete description string for this NetWare SET Parameter.
OBJECT-TYPE    
  INTEGER 1..65535  

nwSetDescription 1.3.6.1.4.1.23.2.28.10.3.1.4
A segment of the description string for this NetWare SET parameter.
OBJECT-TYPE    
  InternationalDisplayString  

nwUserAccounts 1.3.6.1.4.1.23.2.28.11
OBJECT IDENTIFIER    

nwUserAcctTable 1.3.6.1.4.1.23.2.28.11.1
The User Account Table lists all user accounts in this file server. Users in the table may or may not be logged in currently. The information in this table is applicable only to NetWare 3.11 and 3.12 servers, or NetWare 4.10 servers with Bindery Services enabled. In the case of Bindery Services, data is only available for those users in the Bindery context(s) of the server. In a 4.10 server without Bindery Services enabled, this table will be empty
OBJECT-TYPE    
  SEQUENCE OF  
    NwUserAcctEntry

nwUserAcctEntry 1.3.6.1.4.1.23.2.28.11.1.1
An entry in the User Account table provides information on a single user account. The information in this table is applicable only to NetWare 3.11 and 3.12 servers, or NetWare 4.10 servers with Bindery Services enabled. In the case of Bindery Services, data is only available for those users in the Bindery context(s) of the server. In a 4.x server without Bindery Services enabled, this table will be empty
OBJECT-TYPE    
  NwUserAcctEntry  

nwUserID 1.3.6.1.4.1.23.2.28.11.1.1.1
A unique value for each NetWare user with an account on the server. The value for each user must remain constant at least from one re-initialization of the agent to the next re-initialization.
OBJECT-TYPE    
  INTEGER 1..2147483647  

nwUserName 1.3.6.1.4.1.23.2.28.11.1.1.2
The user's login name (Directory Services full distinguished name where appropriate). Zero-length string if not applicable.
OBJECT-TYPE    
  InternationalDisplayString  

nwUserDiskUsage 1.3.6.1.4.1.23.2.28.11.1.1.3
The amount of disk space, in KBytes, this user is occupying across all volumes on this server.
OBJECT-TYPE    
  KBytes  

nwUserLastLoginTime 1.3.6.1.4.1.23.2.28.11.1.1.4
The time the user last logged in to this server.
OBJECT-TYPE    
  DateAndTime  

nwUserAccountStatus 1.3.6.1.4.1.23.2.28.11.1.1.5
The status of this user's account
OBJECT-TYPE    
  INTEGER valid(1), expired(2)  

nwUserPasswordStatus 1.3.6.1.4.1.23.2.28.11.1.1.6
The status of this user's password.
OBJECT-TYPE    
  INTEGER valid(1), expired(2)  

nwUserBadLoginTransport 1.3.6.1.4.1.23.2.28.11.1.1.7
The transport domain (protocol) the user used to log in with bad password last time, valid only if the variable nwUserBadLoginAttempt is larger than zero.
OBJECT-TYPE    
  TransportDomain  

nwUserBadLoginAddress 1.3.6.1.4.1.23.2.28.11.1.1.8
The address the user used to log in with bad password last time, valid only if the variable nwUserBadLoginAttempt is larger than zero.
OBJECT-TYPE    
  TransportAddress  

nwUserBadLoginAttempts 1.3.6.1.4.1.23.2.28.11.1.1.9
The number of times the user attempted to log in with a bad password since the server started. The number would be 0xFFFF if the number of bad login attempts has exceeded the bad login threshold and the account has been locked.
OBJECT-TYPE    
  INTEGER  

nwUserFullName 1.3.6.1.4.1.23.2.28.11.1.1.10
The user's full name.
OBJECT-TYPE    
  InternationalDisplayString  

nwUserVolUsageTable 1.3.6.1.4.1.23.2.28.11.2
The User Volume Usage Table lists the amount of volume space used by each user. It is indexed so you can easily find out how much space a particular user is using on each volume.
OBJECT-TYPE    
  SEQUENCE OF  
    NwUserVolUsageEntry

nwUserVolUsageEntry 1.3.6.1.4.1.23.2.28.11.2.1
An entry in the User Volume Usage table provides information about the amount of space a particular user is using on a particular volume.
OBJECT-TYPE    
  NwUserVolUsageEntry  

nwUserVolUserID 1.3.6.1.4.1.23.2.28.11.2.1.1
A number that uniquely identifies a user. The value of this object for a particular user has the same value as the nwUserID object for the same user.
OBJECT-TYPE    
  INTEGER 1..2147483647  

nwUserVolVolID 1.3.6.1.4.1.23.2.28.11.2.1.2
A number that uniquely identifies a NetWare volume. The value of this object for a particular volume has the same value as the nwVolID object for the same volume.
OBJECT-TYPE    
  INTEGER 1..2147483647  

nwUserVolUsageUser 1.3.6.1.4.1.23.2.28.11.2.1.3
The user's login name (Directory Services full distinguished name where appropriate). Zero-length string if not applicable.
OBJECT-TYPE    
  InternationalDisplayString  

nwUserVolUsageVolume 1.3.6.1.4.1.23.2.28.11.2.1.4
The physical volume name.
OBJECT-TYPE    
  InternationalDisplayString SIZE(0..64)  

nwUserVolUsageSpaceUsed 1.3.6.1.4.1.23.2.28.11.2.1.5
The amount of volume space, in KBytes, this user is occupying.
OBJECT-TYPE    
  KBytes  

nwUserVolUsageLimit 1.3.6.1.4.1.23.2.28.11.2.1.6
The amount of volume space, in KBytes, to which this user is limited. 2147483647 if no limit.
OBJECT-TYPE    
  KBytes  

nwVolUsageTable 1.3.6.1.4.1.23.2.28.11.3
The Volume Usage Table lists the amount of space on each volume used by each user. It is indexed so that you can easily find all the users who are occupying space on a particular volume.
OBJECT-TYPE    
  SEQUENCE OF  
    NwVolUsageEntry

nwVolUsageEntry 1.3.6.1.4.1.23.2.28.11.3.1
An entry in the Volume Usage Table provides information about how much space a particular user is using on a particular volume.
OBJECT-TYPE    
  NwVolUsageEntry  

nwVolUsageVolID 1.3.6.1.4.1.23.2.28.11.3.1.1
A number that uniquely identifies a NetWare volume. The value of this object for a particular volume has the same value as the nwVolID object for the same volume.
OBJECT-TYPE    
  INTEGER 1..2147483647  

nwVolUsageUserID 1.3.6.1.4.1.23.2.28.11.3.1.2
A number that uniquely identifies a user. The value of this object for a particular user has the same value as the nwUserID object for the same user.
OBJECT-TYPE    
  INTEGER 1..2147483647  

nwVolUsageVolume 1.3.6.1.4.1.23.2.28.11.3.1.3
The volume name.
OBJECT-TYPE    
  InternationalDisplayString SIZE(0..64)  

nwVolUsageUser 1.3.6.1.4.1.23.2.28.11.3.1.4
The user name.
OBJECT-TYPE    
  InternationalDisplayString  

nwVolUsageSpaceUsed 1.3.6.1.4.1.23.2.28.11.3.1.5
The volume space, in KBytes, in use by user.
OBJECT-TYPE    
  KBytes  

nwVolUsageLimit 1.3.6.1.4.1.23.2.28.11.3.1.6
The amount of volume space, in KBytes, to which this user is limited. 2147483647 if no limit.
OBJECT-TYPE    
  KBytes  

Defined Objects

Seconds  
INTEGER 0..2147483647    

IPXNetNumber  
OCTET STRING SIZE(4)    

TransportDomain  
INTEGER noAddress(1), ipx(2), ip(3), appleTalkDDP(4)    

TransportAddress  
OCTET STRING    

EngineType  
INTEGER msEngine(1), ioEnginePrimary(2), ioEngineSecondary(3)    

DSTType  
OCTET STRING SIZE(7)    

NwFSVolEntry  
SEQUENCE    
  INTEGER as nwVolID  
  InternationalDisplayString as nwVolPhysicalName  
  KBytes as nwVolSize  
  KBytes as nwVolFree  
  KBytes as nwVolFreeable  
  KBytes as nwVolNonFreeable  
  INTEGER as nwVolBlockSize  
  INTEGER as nwVolMounted  
  INTEGER as nwVolAttributes  
  INTEGER as nwVolNameSpaces  
  INTEGER as nwVolTotalDirEntries  
  INTEGER as nwVolUsedDirEntries  
  INTEGER as nwVolSegmentCount  
  InternationalDisplayString as nwVolDSName  
  INTEGER as nwVolFileSystemID  
  InternationalDisplayString as nwVolFileSystemName  

NwFSOpenFileEntry  
SEQUENCE    
  INTEGER as nwOfileVolID  
  INTEGER as nwOfileDirectoryNumber  
  INTEGER as nwOfileConnection  
  InternationalDisplayString as nwOfileVolumeName  
  InternationalDisplayString as nwOfileName  
  InternationalDisplayString as nwOfileLoginName  

NwConnectionEntry  
SEQUENCE    
  INTEGER as nwConnectionNumber  
  InternationalDisplayString as nwConnectionLoginName  
  TransportDomain as nwConnectionTransportDomain  
  TransportAddress as nwConnectionTransportAddress  
  DateAndTime as nwConnectionTime  
  Counter as nwConnectionReadKBytes  
  Counter as nwConnectionWrittenKBytes  
  Counter as nwConnectionNcpRequests  
  INTEGER as nwConnectionFilesOpen  
  INTEGER as nwConnectionRecordsLocked  
  INTEGER as nwConnectionPrivilege  
  INTEGER as nwConnectionStatus  

NwQueueEntry  
SEQUENCE    
  INTEGER as nwQID  
  InternationalDisplayString as nwQName  
  INTEGER as nwQType  
  INTEGER as nwQAddJobState  
  INTEGER as nwQAttachState  
  INTEGER as nwQServiceJobState  
  InternationalDisplayString as nwQDirVolName  
  INTEGER as nwQNumJobEntries  
  INTEGER as nwQNumAssignedServers  

NwQueueJobEntry  
SEQUENCE    
  INTEGER as nwQJobQID  
  INTEGER as nwQJobNumber  
  InternationalDisplayString as nwQJobDescription  
  DateAndTime as nwQJobEntryDateTime  
  INTEGER as nwQJobPosition  
  INTEGER as nwQJobSize  
  INTEGER as nwQJobControlFlags  
  InternationalDisplayString as nwQJobUserName  
  InternationalDisplayString as nwQJobTargetServerName  
  DateAndTime as nwQJobTargetDateTime  
  InternationalDisplayString as nwQJobServerName  

NwQueueServerEntry  
SEQUENCE    
  INTEGER as nwQServerQID  
  INTEGER as nwQServerID  
  InternationalDisplayString as nwQServerName  
  INTEGER as nwQServerStatus  

NwSft3EngineEntry  
SEQUENCE    
  EngineType as nwSft3EngineType  
  InternationalDisplayString as nwSft3EngineName  
  IPXNetNumber as nwSft3EngineInternalNetNum  

NwNLMEntry  
SEQUENCE    
  INTEGER as nwNLMIndex  
  InternationalDisplayString as nwNLMName  
  InternationalDisplayString as nwNLMDescription  
  INTEGER as nwNLMTotalMemory  
  InternationalDisplayString as nwNLMCopyright  
  INTEGER as nwNLMProtectionDomain  
  INTEGER as nwNLMMajorVer  
  INTEGER as nwNLMMinorVer  
  INTEGER as nwNLMRevision  
  DateAndTime as nwNLMReleaseDate  

NwSetCategoryEntry  
SEQUENCE    
  INTEGER as nwSetCategoryIndex  
  InternationalDisplayString as nwSetCategoryName  

NwSetParamEntry  
SEQUENCE    
  INTEGER as nwSetParamCategoryIndex  
  INTEGER as nwSetParamIndex  
  InternationalDisplayString as nwSetParamName  
  INTEGER as nwSetParamType  
  INTEGER as nwSetParamValueInteger  
  InternationalDisplayString as nwSetParamValueString  
  INTEGER as nwSetParamLowerLimit  
  INTEGER as nwSetParamUpperLimit  
  INTEGER as nwSetParamDescrLength  
  INTEGER as nwSetParamMode  

NwSetDescrEntry  
SEQUENCE    
  INTEGER as nwSetDescrCategoryIndex  
  INTEGER as nwSetDescrParamIndex  
  INTEGER as nwSetDescrIndex  
  InternationalDisplayString as nwSetDescription  

NwUserAcctEntry  
SEQUENCE    
  INTEGER as nwUserID  
  InternationalDisplayString as nwUserName  
  KBytes as nwUserDiskUsage  
  DateAndTime as nwUserLastLoginTime  
  INTEGER as nwUserAccountStatus  
  INTEGER as nwUserPasswordStatus  
  TransportDomain as nwUserBadLoginTransport  
  TransportAddress as nwUserBadLoginAddress  
  INTEGER as nwUserBadLoginAttempts  
  InternationalDisplayString as nwUserFullName  

NwUserVolUsageEntry  
SEQUENCE    
  INTEGER as nwUserVolUserID  
  INTEGER as nwUserVolVolID  
  InternationalDisplayString as nwUserVolUsageUser  
  InternationalDisplayString as nwUserVolUsageVolume  
  KBytes as nwUserVolUsageSpaceUsed  
  KBytes as nwUserVolUsageLimit  

NwVolUsageEntry  
SEQUENCE    
  INTEGER as nwVolUsageVolID  
  INTEGER as nwVolUsageUserID  
  InternationalDisplayString as nwVolUsageVolume  
  InternationalDisplayString as nwVolUsageUser  
  KBytes as nwVolUsageSpaceUsed  
  KBytes as nwVolUsageLimit