Nortel-Magellan-Passport-AppnMIB

File: Nortel-Magellan-Passport-AppnMIB.mib (505714 bytes)

Imported modules

RFC-1212 RFC1155-SMI Nortel-Magellan-Passport-UsefulDefinitionsMIB
Nortel-Magellan-Passport-StandardTextualConventionsMIB Nortel-Magellan-Passport-TextualConventionsMIB

Imported symbols

OBJECT-TYPE TimeTicks components
passportMIBs RowPointer DisplayString
StorageType RowStatus PassportCounter64
Gauge32 Integer32 Unsigned32
AsciiString Hex NonReplicated
HexString EnterpriseDateAndTime Link
AsciiStringIndex DigitString DashedHexString

Defined Objects

appn 1.3.6.1.4.1.562.2.4.1.110
OBJECT IDENTIFIER    

appnRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.1
This entry controls the addition and deletion of appn components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnRowStatusEntry

appnRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.1.1
A single entry in the table represents a single appn component.
OBJECT-TYPE    
  AppnRowStatusEntry  

appnRowStatus 1.3.6.1.4.1.562.2.4.1.110.1.1.1
This variable is used as the basis for SNMP naming of appn components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

appnComponentName 1.3.6.1.4.1.562.2.4.1.110.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnStorageType 1.3.6.1.4.1.562.2.4.1.110.1.1.4
This variable represents the storage type value for the appn tables.
OBJECT-TYPE    
  StorageType  

appnIndex 1.3.6.1.4.1.562.2.4.1.110.1.1.10
This variable represents the index for the appn tables.
OBJECT-TYPE    
  AsciiStringIndex SIZE(1..17)  

appnDna 1.3.6.1.4.1.562.2.4.1.110.2
OBJECT IDENTIFIER    

appnDnaRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.2.1
This entry controls the addition and deletion of appnDna components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDnaRowStatusEntry

appnDnaRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.2.1.1
A single entry in the table represents a single appnDna component.
OBJECT-TYPE    
  AppnDnaRowStatusEntry  

appnDnaRowStatus 1.3.6.1.4.1.562.2.4.1.110.2.1.1.1
This variable is used as the basis for SNMP naming of appnDna components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

appnDnaComponentName 1.3.6.1.4.1.562.2.4.1.110.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnDnaStorageType 1.3.6.1.4.1.562.2.4.1.110.2.1.1.4
This variable represents the storage type value for the appnDna tables.
OBJECT-TYPE    
  StorageType  

appnDnaIndex 1.3.6.1.4.1.562.2.4.1.110.2.1.1.10
This variable represents the index for the appnDna tables.
OBJECT-TYPE    
  NonReplicated  

appnDnaHgM 1.3.6.1.4.1.562.2.4.1.110.2.2
OBJECT IDENTIFIER    

appnDnaHgMRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.2.2.1
This entry controls the addition and deletion of appnDnaHgM components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDnaHgMRowStatusEntry

appnDnaHgMRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.2.2.1.1
A single entry in the table represents a single appnDnaHgM component.
OBJECT-TYPE    
  AppnDnaHgMRowStatusEntry  

appnDnaHgMRowStatus 1.3.6.1.4.1.562.2.4.1.110.2.2.1.1.1
This variable is used as the basis for SNMP naming of appnDnaHgM components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

appnDnaHgMComponentName 1.3.6.1.4.1.562.2.4.1.110.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnDnaHgMStorageType 1.3.6.1.4.1.562.2.4.1.110.2.2.1.1.4
This variable represents the storage type value for the appnDnaHgM tables.
OBJECT-TYPE    
  StorageType  

appnDnaHgMIndex 1.3.6.1.4.1.562.2.4.1.110.2.2.1.1.10
This variable represents the index for the appnDnaHgM tables.
OBJECT-TYPE    
  NonReplicated  

appnDnaHgMHgAddr 1.3.6.1.4.1.562.2.4.1.110.2.2.2
OBJECT IDENTIFIER    

appnDnaHgMHgAddrRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.2.2.2.1
This entry controls the addition and deletion of appnDnaHgMHgAddr components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDnaHgMHgAddrRowStatusEntry

appnDnaHgMHgAddrRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.2.2.2.1.1
A single entry in the table represents a single appnDnaHgMHgAddr component.
OBJECT-TYPE    
  AppnDnaHgMHgAddrRowStatusEntry  

appnDnaHgMHgAddrRowStatus 1.3.6.1.4.1.562.2.4.1.110.2.2.2.1.1.1
This variable is used as the basis for SNMP naming of appnDnaHgMHgAddr components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

appnDnaHgMHgAddrComponentName 1.3.6.1.4.1.562.2.4.1.110.2.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnDnaHgMHgAddrStorageType 1.3.6.1.4.1.562.2.4.1.110.2.2.2.1.1.4
This variable represents the storage type value for the appnDnaHgMHgAddr tables.
OBJECT-TYPE    
  StorageType  

appnDnaHgMHgAddrIndex 1.3.6.1.4.1.562.2.4.1.110.2.2.2.1.1.10
This variable represents the index for the appnDnaHgMHgAddr tables.
OBJECT-TYPE    
  Integer32 0..1  

appnDnaHgMHgAddrAddrTable 1.3.6.1.4.1.562.2.4.1.110.2.2.2.10
This group contains attributes common to all DNAs. Every DNA used in the network is defined with this group of 2 attributes.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDnaHgMHgAddrAddrEntry

appnDnaHgMHgAddrAddrEntry 1.3.6.1.4.1.562.2.4.1.110.2.2.2.10.1
An entry in the appnDnaHgMHgAddrAddrTable.
OBJECT-TYPE    
  AppnDnaHgMHgAddrAddrEntry  

appnDnaHgMHgAddrNumberingPlanIndicator 1.3.6.1.4.1.562.2.4.1.110.2.2.2.10.1.1
This attribute specifies the Numbering Plan Indicator (NPI) of the Dna that is entered. The address may belong to the X.121 or E.164 numbering plans.
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

appnDnaHgMHgAddrDataNetworkAddress 1.3.6.1.4.1.562.2.4.1.110.2.2.2.10.1.2
This attribute specifies the digits that form the unique identifier of the customer interface. It can be compared (approximation only) to a telephone number where phone number identifies unique telephone set. Dna digits are selected and assigned by network operators.
OBJECT-TYPE    
  DigitString SIZE(1..15)  

appnDnaHgMIfTable 1.3.6.1.4.1.562.2.4.1.110.2.2.10
This group contains the interface parameters between the HuntGroupMember and the Hunt Group server.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDnaHgMIfEntry

appnDnaHgMIfEntry 1.3.6.1.4.1.562.2.4.1.110.2.2.10.1
An entry in the appnDnaHgMIfTable.
OBJECT-TYPE    
  AppnDnaHgMIfEntry  

appnDnaHgMAvailabilityUpdateThreshold 1.3.6.1.4.1.562.2.4.1.110.2.2.10.1.1
This attribute indicates the number of channels that have to be freed or occupied before the Availability Message Packet (AMP) is sent to the Hunt Group Server informing it of the status of this interface.
OBJECT-TYPE    
  Unsigned32 0..4096  

appnDnaHgMOpTable 1.3.6.1.4.1.562.2.4.1.110.2.2.11
This group contains the operational attributes of the HuntGroupMember component.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDnaHgMOpEntry

appnDnaHgMOpEntry 1.3.6.1.4.1.562.2.4.1.110.2.2.11.1
An entry in the appnDnaHgMOpTable.
OBJECT-TYPE    
  AppnDnaHgMOpEntry  

appnDnaHgMMaxAvailableChannels 1.3.6.1.4.1.562.2.4.1.110.2.2.11.1.1
This attribute indicates the maximum number of available channels for this HuntGroupMember.
OBJECT-TYPE    
  Unsigned32 0..4096  

appnDnaHgMAvailableChannels 1.3.6.1.4.1.562.2.4.1.110.2.2.11.1.2
This attribute indicates the number of available channels reported to the hunt group in the Availability Message Packet (AMP). It is incremented by the application when a channel is freed and decremented when a channel is occupied.
OBJECT-TYPE    
  Unsigned32 0..4096  

appnDnaHgMAvailabilityDelta 1.3.6.1.4.1.562.2.4.1.110.2.2.11.1.3
This attribute indicates the net change in the available channels since the last Availability Message Packet (AMP) was sent to the Hunt Group. Once the absolute value of this attribute reaches the availabilityUpdateThreshold an AMP is sent to the host and the availabilityDelta is reset to 0. If this attribute is positive it means an increase of the number of available channels. If it is negative it means a decrease in the number of available channels.
OBJECT-TYPE    
  INTEGER -4096..4096  

appnDnaCug 1.3.6.1.4.1.562.2.4.1.110.2.3
OBJECT IDENTIFIER    

appnDnaCugRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.2.3.1
This entry controls the addition and deletion of appnDnaCug components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDnaCugRowStatusEntry

appnDnaCugRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.2.3.1.1
A single entry in the table represents a single appnDnaCug component.
OBJECT-TYPE    
  AppnDnaCugRowStatusEntry  

appnDnaCugRowStatus 1.3.6.1.4.1.562.2.4.1.110.2.3.1.1.1
This variable is used as the basis for SNMP naming of appnDnaCug components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

appnDnaCugComponentName 1.3.6.1.4.1.562.2.4.1.110.2.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnDnaCugStorageType 1.3.6.1.4.1.562.2.4.1.110.2.3.1.1.4
This variable represents the storage type value for the appnDnaCug tables.
OBJECT-TYPE    
  StorageType  

appnDnaCugIndex 1.3.6.1.4.1.562.2.4.1.110.2.3.1.1.10
This variable represents the index for the appnDnaCug tables.
OBJECT-TYPE    
  Integer32 1..255  

appnDnaCugCugOptionsTable 1.3.6.1.4.1.562.2.4.1.110.2.3.10
Attributes in this group defines ClosedUserGroup options associated with interlockCode. Dnas with the same Cug (interlockCode) make calls within this group. Various combinations which permit or prevent calls in the same Cug group are defined here.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDnaCugCugOptionsEntry

appnDnaCugCugOptionsEntry 1.3.6.1.4.1.562.2.4.1.110.2.3.10.1
An entry in the appnDnaCugCugOptionsTable.
OBJECT-TYPE    
  AppnDnaCugCugOptionsEntry  

appnDnaCugType 1.3.6.1.4.1.562.2.4.1.110.2.3.10.1.1
This attribute specifies the Cug type - the Cug is either a national Cug, or an international Cug. International closed user groups are usually established between DTEs for which there is an X.75 Gateway between; whereas national closed user groups are usually established between DTEs for which there is no X.75 Gateway between. (National Cugs cannot normally traverse an X.75 Gateway). If this attribute is set to national, then the Cug is a national Cug, in which case, the dnic should be left at its default value since it is not part of a national Cug. If this attribute is set to international, then the Cug is an international Cug, in which case, the dnic should be set appropriately as part of the Cug interlockCode.
OBJECT-TYPE    
  INTEGER national(0), international(1)  

appnDnaCugDnic 1.3.6.1.4.1.562.2.4.1.110.2.3.10.1.2
This attribute specifies the dnic (Data Network ID Code) the Cug by which packet networks are identified. This attribute is not applicable if the Cug is a national Cug, as specified by the Cug type attribute. There are usually 1 or 2 dnics assigned per country, for public networks. The U.S. is an exception where each BOC has a dnic. Also, a group of private networks can have its own dnic. dnic value is not an arbitrary number. It is assigned by international agreement and controlled by CCITT.
OBJECT-TYPE    
  DigitString SIZE(4)  

appnDnaCugInterlockCode 1.3.6.1.4.1.562.2.4.1.110.2.3.10.1.3
This attribute specifies the Cug identifier of a national or international Cug call. It is an arbitrary number and it also can be called Cug in some descriptions. Interfaces (Dnas) with this number can make calls to Dnas with the same interlockCode.
OBJECT-TYPE    
  Unsigned32 0..65535  

appnDnaCugPreferential 1.3.6.1.4.1.562.2.4.1.110.2.3.10.1.4
This attribute, if set to yes indicates that this Cug is the preferential Cug, in which case it will be used during the call establishment phase if the DTE has not explicitly specified a Cug index in the call request packet. If set to no, then this Cug is not the preferential Cug. Only one of the Cugs associated with a particular Dna can be the preferential Cug - only one Cug can have this attribute set to yes.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

appnDnaCugOutCalls 1.3.6.1.4.1.562.2.4.1.110.2.3.10.1.5
This attribute, if set to allowed indicates that outgoing calls (from the DTE into the network) be made using this particular Cug. If set to a value of disallowed, then outgoing calls cannot be made using this Cug - such calls will be cleared by the local DCE. This attribute corresponds to the CCITT 'Outgoing Calls Barred' feature for Cugs in that outgoing calls are barred if this attribute is set to a value of disallowed.
OBJECT-TYPE    
  INTEGER disallowed(0), allowed(1)  

appnDnaCugIncCalls 1.3.6.1.4.1.562.2.4.1.110.2.3.10.1.6
This attribute, if set to allowed indicates that incoming calls (from the network to the DTE) be made using this particular Cug. If set to disallowed, then incoming calls cannot be made using this Cug - such calls will be cleared by the local DCE. This attribute corresponds to the CCITT 'Incoming Calls Barred' feature for Cugs in that incoming calls are barred if this attribute is set to a value of disallowed.
OBJECT-TYPE    
  INTEGER disallowed(0), allowed(1)  

appnDnaCugPrivileged 1.3.6.1.4.1.562.2.4.1.110.2.3.10.1.7
This attribute, if set to yes indicates that this Cug is a privileged Cug. In DPN, at least one side of a call setup within a Cug must have the Cug as a privileged Cug. If set to no, then the Cug is not privileged. If both the local DTE and the remote DTE subscribe to the Cug, but it is not privileged, then the call will be cleared. This attribute is typically used for a host DTE which must accept calls from many other DTEs in which case the other DTEs cannot call one another, but can call the host. In this example, the host would have the privileged Cug, and the other DTEs would belong to the same Cug, but it would not be privileged.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

appnDnaAddressTable 1.3.6.1.4.1.562.2.4.1.110.2.10
Address group contains attributes common to all Dna's. Every Dna used in the network is defined with this group of 2 attributes. String of address digits is complemented by type of address and Npi. These attributes are used to interpret format of the address digits.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDnaAddressEntry

appnDnaAddressEntry 1.3.6.1.4.1.562.2.4.1.110.2.10.1
An entry in the appnDnaAddressTable.
OBJECT-TYPE    
  AppnDnaAddressEntry  

appnDnaNumberingPlanIndicator 1.3.6.1.4.1.562.2.4.1.110.2.10.1.1
This attribute indicates the Numbering Plan Indicator (NPI) of the Dna that is entered. Address may belong to X.121 or E.164 plans. X.121 is used in packet switched data networks.
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

appnDnaDataNetworkAddress 1.3.6.1.4.1.562.2.4.1.110.2.10.1.2
Dna attribute contains digits which form unique identifier of the customer interface. It can be compared (approximation only) to telephone number where phone number identifies unique telephone set. Dna digits are selected and assigned by network operators.
OBJECT-TYPE    
  DigitString SIZE(1..15)  

appnDnaOutgoingOptionsTable 1.3.6.1.4.1.562.2.4.1.110.2.12
OutgoingOptions group defines call options of a Dna for calls which are made out of the interface represented by Dna. All these options are not used for calls arriving to the interface represented by Dna.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDnaOutgoingOptionsEntry

appnDnaOutgoingOptionsEntry 1.3.6.1.4.1.562.2.4.1.110.2.12.1
An entry in the appnDnaOutgoingOptionsTable.
OBJECT-TYPE    
  AppnDnaOutgoingOptionsEntry  

appnDnaOutDefaultPriority 1.3.6.1.4.1.562.2.4.1.110.2.12.1.7
This attribute, if set to normal indicates that the default priority for outgoing calls (from the DTE to the network) using this particular Dna is normal priority - if the priority is not specified by the DTE. If this attribute is set to high then the default priority for outgoing calls using this particular Dna is high priority. This option can be also included in X.25 signalling, in such case it will be overruled.
OBJECT-TYPE    
  INTEGER normal(0), high(1)  

appnDnaOutDefaultPathSensitivity 1.3.6.1.4.1.562.2.4.1.110.2.12.1.11
This attribute specifies the default class of routing for delay/ throughput sensitive routing for all outgoing calls (from the DTE to the network) using this particular Dna. The chosen default class of routing applies to all outgoing calls established using this Dna, and applies to the packets travelling in both directions on all outgoing calls (local to remote, and remote to local). For incoming calls, the default class of routing is chosen by the calling party (as opposed to DPN, where either end of the call can choose the default routing class). This attribute, if set to a value of throughput, indicates that the default class of routing is throughput sensitive routing. If set to a value of delay, then the default class of routing is delay sensitive routing. In the future, the class of routing sensitivity may be overridden at the calling end of the call as follows: The default class of routing sensitivity can be overridden by the DTE in the call request packet through the TDS&I (Transit Delay Selection & Indication) facility if the DTE supports this facility. Whether or not the DTE is permitted to signal the TDS&I facility will depend on the DTE (i.e.: TDS&I is supported in X.25 only), and will depend on whether the port is configured to permit the TDS&I facility. In Passport, the treatment of DTE facilities (for example, NUI, RPOA, and TDS&I) is not fully defined yet since it is not required. At the point in time when it is required, the parameter to control whether or not the DTE is permitted to signal the TDS&I will be in a Facility Treatment component. Currently, the default is to disallow the TDS&I facility from the DTE.
OBJECT-TYPE    
  INTEGER throughput(0), delay(1)  

appnDnaOutPathSensitivityOverRide 1.3.6.1.4.1.562.2.4.1.110.2.12.1.12
If this attribute is set to yes in the call request, the called end will use the calling end provisioning data on sensitivity to override its provisioning data,
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

appnDnaOutDefaultPathReliability 1.3.6.1.4.1.562.2.4.1.110.2.12.1.14
This attribute specifies the default class of routing for reliability routing for all outgoing calls (from the DTE to the network) using this particular Dna. The chosen default class of routing applies to all outgoing calls established using this Dna, and applies to the packets travelling in both directions on all outgoing calls (local to remote, and remote to local). For incoming calls, the default class of routing is chosen by the calling party (as opposed to DPN, where either end of the call can choose the default routing class). This attribute, if set to a value of normal, indicates that the default class of routing is normal reliability routing. If set to a value of high, then the default class of routing is high reliability routing. High reliability is the standard choice for most DPN and Passport services. It usually indicates that packets are overflowed or retransmitted at various routing levels. Typically high reliability results in duplication and disordering of packets in the network when errors are detected or during link congestion. However, the Vc handles the duplication and disordering to ensure that packets are delivered to the DTE properly. For the Frame Relay service, duplication of packets is not desired, in which case, normal reliability may be chosen as the preferred class of routing.
OBJECT-TYPE    
  INTEGER high(0), normal(1)  

appnDnaOutAccess 1.3.6.1.4.1.562.2.4.1.110.2.12.1.17
This attribute is an extension of the Closed User Group (CUG) facility, as follows: This attribute, if set to a value of allowed indicates that outgoing calls (from the DTE to the network) to the open (non-CUG) part of the network are permitted. It also permits outgoing calls to DTEs that have Incoming Access capabilities. If set to a value of disallowed, then such calls cannot be made using this Dna - such calls will be cleared by the local DCE. This attribute corresponds to the CCITT 'Closed User Group with Outgoing Access' feature for Dna's in that outgoing access is granted if this attribute is set to a value of allowed.
OBJECT-TYPE    
  INTEGER disallowed(0), allowed(1)  

appnDnaDefaultTransferPriority 1.3.6.1.4.1.562.2.4.1.110.2.12.1.18
This attribute specifies the default transfer priority to network for all outgoing calls using this particular Dna. It is overRidden by the transferPriority provisioned in the DLCI Direct Call sub- component. The transfer priority is a preference specified by an application according to its delay-sensitivity requirement. Frames with high transfer priority are served by the network before the frames with normal priority. Each transfer priority contains a predetermined setting for trunk queue (interrupting, delay or throughput), and routing metric (delay or throughput). When the transfer priority is set at high, the trunk queue is set to high, the routing metric is set to delay. When the transfer priority is set at normal, the trunk queue is set to normal, the routing metric is set to throughput. The default of defaultTransferPriority is normal.
OBJECT-TYPE    
  INTEGER normal(0), high(9)  

appnDnaTransferPriorityOverRide 1.3.6.1.4.1.562.2.4.1.110.2.12.1.19
When this attribute is set to yes in the call request, the called end will use the calling end provisioning data on transfer priority to override its own provisioning data. If it is set no, the called end will use its own provisioning data on transfer priority. The default of outTransferPriorityOverRide is yes.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

appnDnaIncomingOptionsTable 1.3.6.1.4.1.562.2.4.1.110.2.13
IncomingOptions defines set of options for incoming calls. These options are used for calls arriving to the interface represented by Dna. For calls originated from the interface, IncomingOptions attributes are not used.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDnaIncomingOptionsEntry

appnDnaIncomingOptionsEntry 1.3.6.1.4.1.562.2.4.1.110.2.13.1
An entry in the appnDnaIncomingOptionsTable.
OBJECT-TYPE    
  AppnDnaIncomingOptionsEntry  

appnDnaIncAccess 1.3.6.1.4.1.562.2.4.1.110.2.13.1.9
This attribute is an extension of the Closed User Group (CUG) facility, as follows: This attribute, if set to a value of allowed indicates that incoming calls (from the network to the DTE) from the open (non-CUG) part of the network are permitted. It also permits incoming calls from DTEs that have Outgoing Access capabilities. If set to a value of disallowed, then such calls cannot be made to this Dna - such calls will be cleared by the local DCE. This attribute corresponds to the CCITT 'Closed User Group with Incoming Access' feature for Dnas in that incoming access is granted if this attribute is set to a value of allowed.
OBJECT-TYPE    
  INTEGER disallowed(0), allowed(1)  

appnDnaCallOptionsTable 1.3.6.1.4.1.562.2.4.1.110.2.14
CallOptions group defines additional options for calls not related directly to direction of a call.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDnaCallOptionsEntry

appnDnaCallOptionsEntry 1.3.6.1.4.1.562.2.4.1.110.2.14.1
An entry in the appnDnaCallOptionsTable.
OBJECT-TYPE    
  AppnDnaCallOptionsEntry  

appnDnaDefaultRecvFrmNetworkThruputClass 1.3.6.1.4.1.562.2.4.1.110.2.14.1.5
This attribute indicates the default receive throughput class for all calls using this particular Dna.
OBJECT-TYPE    
  Unsigned32 0..15  

appnDnaDefaultSendToNetworkThruputClass 1.3.6.1.4.1.562.2.4.1.110.2.14.1.6
This attribute indicates the default send throughput class for all calls using this particular Dna.
OBJECT-TYPE    
  Unsigned32 0..15  

appnDnaDefaultRecvFrmNetworkWindowSize 1.3.6.1.4.1.562.2.4.1.110.2.14.1.7
This attribute indicates the default number of data packets that can be received by the DTE from the DCE before more packets can be received. This view is oriented with respect to the DTE.
OBJECT-TYPE    
  Unsigned32 1..7  

appnDnaDefaultSendToNetworkWindowSize 1.3.6.1.4.1.562.2.4.1.110.2.14.1.8
This attribute indicates the number of data packets that can be transmitted from the DTE to the DCE and must be acknowledged before more packets can be transmitted.
OBJECT-TYPE    
  Unsigned32 1..7  

appnDnaAccountClass 1.3.6.1.4.1.562.2.4.1.110.2.14.1.10
This attribute specifies the accounting class which is reserved for network operations usage. Its value is returned in the accounting record in the local and remote service type attributes. Use of this attribute is decided by network operator and it is an arbitrary number.
OBJECT-TYPE    
  Unsigned32 0..255  

appnDnaAccountCollection 1.3.6.1.4.1.562.2.4.1.110.2.14.1.11
This attribute indicates that accounting records are to be collected by the network for the various reasons: billing, test, study, auditing. The last of the parameters, force, indicates that accounting records are to be collected irrespective of other collection reasons. If none of these reasons are set, then accounting will be suppressed. Description of bits: bill(0) test(1) study(2) audit(3) force(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

appnDnaServiceExchange 1.3.6.1.4.1.562.2.4.1.110.2.14.1.12
This attribute is an arbitrary number, entered by the network operator. It is included in the accounting record created by Vc.
OBJECT-TYPE    
  Unsigned32 0..255  

appnDlci 1.3.6.1.4.1.562.2.4.1.110.3
OBJECT IDENTIFIER    

appnDlciRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.3.1
This entry controls the addition and deletion of appnDlci components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDlciRowStatusEntry

appnDlciRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.3.1.1
A single entry in the table represents a single appnDlci component.
OBJECT-TYPE    
  AppnDlciRowStatusEntry  

appnDlciRowStatus 1.3.6.1.4.1.562.2.4.1.110.3.1.1.1
This variable is used as the basis for SNMP naming of appnDlci components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

appnDlciComponentName 1.3.6.1.4.1.562.2.4.1.110.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnDlciStorageType 1.3.6.1.4.1.562.2.4.1.110.3.1.1.4
This variable represents the storage type value for the appnDlci tables.
OBJECT-TYPE    
  StorageType  

appnDlciIndex 1.3.6.1.4.1.562.2.4.1.110.3.1.1.10
This variable represents the index for the appnDlci tables.
OBJECT-TYPE    
  Integer32 16..4095  

appnDlciDc 1.3.6.1.4.1.562.2.4.1.110.3.2
OBJECT IDENTIFIER    

appnDlciDcRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.3.2.1
This entry controls the addition and deletion of appnDlciDc components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDlciDcRowStatusEntry

appnDlciDcRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.3.2.1.1
A single entry in the table represents a single appnDlciDc component.
OBJECT-TYPE    
  AppnDlciDcRowStatusEntry  

appnDlciDcRowStatus 1.3.6.1.4.1.562.2.4.1.110.3.2.1.1.1
This variable is used as the basis for SNMP naming of appnDlciDc components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

appnDlciDcComponentName 1.3.6.1.4.1.562.2.4.1.110.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnDlciDcStorageType 1.3.6.1.4.1.562.2.4.1.110.3.2.1.1.4
This variable represents the storage type value for the appnDlciDc tables.
OBJECT-TYPE    
  StorageType  

appnDlciDcIndex 1.3.6.1.4.1.562.2.4.1.110.3.2.1.1.10
This variable represents the index for the appnDlciDc tables.
OBJECT-TYPE    
  NonReplicated  

appnDlciDcOptionsTable 1.3.6.1.4.1.562.2.4.1.110.3.2.10
The Options group defines attributes associated with a direct call. It defines a complete connection in terms of path and call options. This connection can be permanent (PVC) or switched (SVC). It can have facilities. The total number of bytes of facilities including the facility codes, and all of the facility data from all of the four classes of facilities: CCITT_Facilities DTE_Facilities National_Facilities International_Facilities must not exceed 512.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDlciDcOptionsEntry

appnDlciDcOptionsEntry 1.3.6.1.4.1.562.2.4.1.110.3.2.10.1
An entry in the appnDlciDcOptionsTable.
OBJECT-TYPE    
  AppnDlciDcOptionsEntry  

appnDlciDcRemoteNpi 1.3.6.1.4.1.562.2.4.1.110.3.2.10.1.3
This attribute specifies the numbering plan used for remoteDna.
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

appnDlciDcRemoteDna 1.3.6.1.4.1.562.2.4.1.110.3.2.10.1.4
This attribute specifies the Data Network Address (Dna) of the remote. This is the called (destination) DTE address (Dna) to which this direct call will be sent. Initially, the called DTE address attribute must be present, that is, there must be a valid destination address. However, it may be possible in the future to configure the direct call with a mnemonic address, in which case, this attribute will contain a zero-length Dna, and the mnemonic address will be carried as one of the facilities.
OBJECT-TYPE    
  DigitString SIZE(1..15)  

appnDlciDcRemoteDlci 1.3.6.1.4.1.562.2.4.1.110.3.2.10.1.5
This attribute provides the remote DLCI (Logical Channel Number) - it is used only for PVCs, where attribute type is set to permanentMaster or permanentSlave or permanentBackupSlave. In switched case, value of remoteDlci is not known when call request is made.
OBJECT-TYPE    
  Unsigned32 0..4095  

appnDlciDcType 1.3.6.1.4.1.562.2.4.1.110.3.2.10.1.6
This attribute specifies the type of Vc call: permanentMaster, permanentSlave, permanentSlaveWithBackup, permanentBackupSlave. If the value is set to permanentMaster, then a permanent connection will be established between two ends. The remote end must be defined as a permanentSlave, permanentBackupSlave or permanentSlaveWithBackup. The connection cannot be established if the remote end is defined as anything else. The end defined as permanentMaster always initiates the calls. It will attempt to call once per minute. If the value is set to permanentSlave then a permanent connection will be established between 2 ends. The remote end must be defined as a permanentMaster. The connection cannot be established if the remote end is defined as anything else. The permanentSlave end will attempt to call once per minute. If the value is set to permanentSlaveWithBackup then a permanent connection will be established between the 2 ends . The remote end must be defined as a permanentMaster. The Connection cannot be established if the remote end is defined as anything else. The permanentSlaveWithBackup end will attempt to call once per minute. If the value is set to permanentBackupSlave then a permanent connection will be established between the 2 ends only if the permanentMaster end is disconnected from the permanentSlaveWithBackup end and a backup call is established by the redirection system. If the permanentSlaveWithBackup interface becomes visible again, the permanentBackupSlave end is disconnected and the permanentSlaveWithBackup end is reconnected to the permanentMaster end. The permanentBackupSlave end does not try to establish PVC call.
OBJECT-TYPE    
  INTEGER permanentMaster(1), permanentSlave(2), permanentBackupSlave(3), permanentSlaveWithBackup(4)  

appnDlciDcTransferPriority 1.3.6.1.4.1.562.2.4.1.110.3.2.10.1.9
This attribute specifies the transfer priority to network for the outgoing calls using this particular DLCI. It overRides the defaultTransferPriority provisioned in its associated Dna component. The transfer priority is a preference specified by an application according to its delay-sensitivity requirement. Frames with high transfer priority are served by the network before the frames with normal priority. Each transfer priority contains a predetermined setting for trunk queue (interrupting, delay or throughput), and routing metric (delay or throughput). When the transfer priority is set at high, the trunk queue is set to high, the routing metric is set to delay. When the transfer priority is set at normal, the trunk queue is set to normal, the routing metric is set to throughput. The default of transferPriority is useDnaDefTP. It means using the provisioning value under defaultTransferPriority of its associated Dna for this DLCI.
OBJECT-TYPE    
  INTEGER normal(0), high(9), useDnaDefTP(255)  

appnDlciDcDiscardPriority 1.3.6.1.4.1.562.2.4.1.110.3.2.10.1.10
This attribute specifies the discard priority for outgoing call using this DLCI. The discard priority has three provisioning values: normal, high, and useDnaDefPriority. Traffic with normal priority are discarded first than the traffic with high priority. The Dna default value (provisioned by outDefaultPriority) is taken if this attribute is set to the value useDnaDefPriority. The default of discardPriority is useDnaDefPriority.
OBJECT-TYPE    
  INTEGER normal(0), high(1), useDnaDefPriority(3)  

appnDlciDcNfaTable 1.3.6.1.4.1.562.2.4.1.110.3.2.283
Two explicit attributes discardPriority and transferPriority are created to replace H.01 and H.30 in the group VcsDirectCallOptionsProv of this file. The migrate escape here (DcComponent::migrateFaxEscape) propagates the old provisioning data under H.01 and H.30 into discardPriority and transferPriority. The rule of the above propagation are: 0 in H.01 is equivalent to discardPriority 0; 1 in H.01 is equivalent to discardPriority 1. And 0 in H.30 is equivalent to transferPriority normal; 1 in H.30 is equivalent to transferPriority high. Please refer to discardPriority and transferPriority for more information on how to use them.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDlciDcNfaEntry

appnDlciDcNfaEntry 1.3.6.1.4.1.562.2.4.1.110.3.2.283.1
An entry in the appnDlciDcNfaTable.
OBJECT-TYPE    
  AppnDlciDcNfaEntry  

appnDlciDcNfaIndex 1.3.6.1.4.1.562.2.4.1.110.3.2.283.1.1
This variable represents the index for the appnDlciDcNfaTable.
OBJECT-TYPE    
  Integer32 1 | 48  

appnDlciDcNfaValue 1.3.6.1.4.1.562.2.4.1.110.3.2.283.1.2
This variable represents an individual value for the appnDlciDcNfaTable.
OBJECT-TYPE    
  HexString SIZE(0..128)  

appnDlciDcNfaRowStatus 1.3.6.1.4.1.562.2.4.1.110.3.2.283.1.3
This variable is used to control the addition and deletion of individual values of the appnDlciDcNfaTable.
OBJECT-TYPE    
  RowStatus  

appnDlciVc 1.3.6.1.4.1.562.2.4.1.110.3.3
OBJECT IDENTIFIER    

appnDlciVcRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.3.3.1
This entry controls the addition and deletion of appnDlciVc components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDlciVcRowStatusEntry

appnDlciVcRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.3.3.1.1
A single entry in the table represents a single appnDlciVc component.
OBJECT-TYPE    
  AppnDlciVcRowStatusEntry  

appnDlciVcRowStatus 1.3.6.1.4.1.562.2.4.1.110.3.3.1.1.1
This variable is used as the basis for SNMP naming of appnDlciVc components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

appnDlciVcComponentName 1.3.6.1.4.1.562.2.4.1.110.3.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnDlciVcStorageType 1.3.6.1.4.1.562.2.4.1.110.3.3.1.1.4
This variable represents the storage type value for the appnDlciVc tables.
OBJECT-TYPE    
  StorageType  

appnDlciVcIndex 1.3.6.1.4.1.562.2.4.1.110.3.3.1.1.10
This variable represents the index for the appnDlciVc tables.
OBJECT-TYPE    
  NonReplicated  

appnDlciVcCadTable 1.3.6.1.4.1.562.2.4.1.110.3.3.10
This group represents operational call data related to Frame Relay Vc. It can be displayed only for Frame Relay Vc which is created by application.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDlciVcCadEntry

appnDlciVcCadEntry 1.3.6.1.4.1.562.2.4.1.110.3.3.10.1
An entry in the appnDlciVcCadTable.
OBJECT-TYPE    
  AppnDlciVcCadEntry  

appnDlciVcType 1.3.6.1.4.1.562.2.4.1.110.3.3.10.1.1
This attribute displays the type of call, pvc,svc or spvc.
OBJECT-TYPE    
  INTEGER svc(0), pvc(1), spvc(2)  

appnDlciVcState 1.3.6.1.4.1.562.2.4.1.110.3.3.10.1.2
This attribute displays the state of call control. P5 state is not supported but is listed for completness. Transitions from one state to another take very short time. state most often displayed is dataTransferP4.
OBJECT-TYPE    
  INTEGER creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8)  

appnDlciVcPreviousState 1.3.6.1.4.1.562.2.4.1.110.3.3.10.1.3
This attribute displays the previous state of call control. This is a valuable field to determine how the processing is progressing.
OBJECT-TYPE    
  INTEGER creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8)  

appnDlciVcDiagnosticCode 1.3.6.1.4.1.562.2.4.1.110.3.3.10.1.4
This attribute displays the internal substate of call control. It is used to further refine state of call processing.
OBJECT-TYPE    
  Unsigned32 0..255  

appnDlciVcPreviousDiagnosticCode 1.3.6.1.4.1.562.2.4.1.110.3.3.10.1.5
This attribute displays the internal substate of call control. It is used to further refine state of call processing.
OBJECT-TYPE    
  Unsigned32 0..255  

appnDlciVcCalledNpi 1.3.6.1.4.1.562.2.4.1.110.3.3.10.1.6
This attribute displays the Numbering Plan Indicator (NPI) of the called end.
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

appnDlciVcCalledDna 1.3.6.1.4.1.562.2.4.1.110.3.3.10.1.7
This attribute displays the Data Network Address (Dna) of the called (destination) DTE to which this call is sent. This address if defined at recieving end will complete Vc connection.
OBJECT-TYPE    
  DigitString SIZE(1..15)  

appnDlciVcCalledLcn 1.3.6.1.4.1.562.2.4.1.110.3.3.10.1.8
This attribute displays the Logical Channel Number of the called end. It is valid only after both ends of Vc exchanged relevant information.
OBJECT-TYPE    
  Unsigned32 1..65535  

appnDlciVcCallingNpi 1.3.6.1.4.1.562.2.4.1.110.3.3.10.1.9
This attribute displays the Numbering Plan Indicator (NPI) of the calling end.
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

appnDlciVcCallingDna 1.3.6.1.4.1.562.2.4.1.110.3.3.10.1.10
This attribute displays the Data Network Address (Dna) of the calling end.
OBJECT-TYPE    
  DigitString SIZE(1..15)  

appnDlciVcCallingLcn 1.3.6.1.4.1.562.2.4.1.110.3.3.10.1.11
This attribute displays the Logical Channel Number of the calling end.
OBJECT-TYPE    
  Unsigned32 1..65535  

appnDlciVcAccountingEnabled 1.3.6.1.4.1.562.2.4.1.110.3.3.10.1.12
This attribute indicates that this optional section of accounting record is suppressed or permitted. If accountingEnabled is yes, conditions for generation of accounting record were met. These conditions include billing options, vc recovery conditions and Module wide accounting data options.
OBJECT-TYPE    
  INTEGER yes(0), no(1)  

appnDlciVcFastSelectCall 1.3.6.1.4.1.562.2.4.1.110.3.3.10.1.13
This attribute displays that this is a fast select call.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

appnDlciVcPathReliability 1.3.6.1.4.1.562.2.4.1.110.3.3.10.1.19
This attribute displays the path reliability.
OBJECT-TYPE    
  INTEGER high(0), normal(1)  

appnDlciVcAccountingEnd 1.3.6.1.4.1.562.2.4.1.110.3.3.10.1.20
This attribute indicates if this end should generate an accounting record. Normally, callingEnd is the end to generate an accounting record.
OBJECT-TYPE    
  INTEGER callingEnd(0), calledEnd(1)  

appnDlciVcPriority 1.3.6.1.4.1.562.2.4.1.110.3.3.10.1.21
This attribute displays whether the call is a normal or a high priority call.
OBJECT-TYPE    
  INTEGER normal(0), high(1)  

appnDlciVcSegmentSize 1.3.6.1.4.1.562.2.4.1.110.3.3.10.1.22
This attribute displays the segment size (in bytes) used on the call. It is used to calculate the number of segments transmitted and received.
OBJECT-TYPE    
  Unsigned32 0..4096  

appnDlciVcMaxSubnetPktSize 1.3.6.1.4.1.562.2.4.1.110.3.3.10.1.27
This attribute indicates the maximum packet size allowed on the Vc.
OBJECT-TYPE    
  Unsigned32 0..4096  

appnDlciVcRcosToNetwork 1.3.6.1.4.1.562.2.4.1.110.3.3.10.1.28
This attribute indicates the routing metric routing class of service to the network.
OBJECT-TYPE    
  INTEGER throughput(0), delay(1), multimedia(2)  

appnDlciVcRcosFromNetwork 1.3.6.1.4.1.562.2.4.1.110.3.3.10.1.29
This attribute displays the routing metric Routing Class of Service from the Network.
OBJECT-TYPE    
  INTEGER throughput(0), delay(1), multimedia(2)  

appnDlciVcEmissionPriorityToNetwork 1.3.6.1.4.1.562.2.4.1.110.3.3.10.1.30
This attribute displays the network internal emission priotity to the network.
OBJECT-TYPE    
  INTEGER normal(0), high(1), interrupting(2)  

appnDlciVcEmissionPriorityFromNetwork 1.3.6.1.4.1.562.2.4.1.110.3.3.10.1.31
This attribute displays the network internal emission priotity from the network.
OBJECT-TYPE    
  INTEGER normal(0), high(1), interrupting(2)  

appnDlciVcDataPath 1.3.6.1.4.1.562.2.4.1.110.3.3.10.1.32
This attribute indicates the data path used by the connection. The data path is provisioned in Dna and DirectCall components. The displayed value of this attribute can be different from the provisioned value. If the connection is using dprsOnly data path, the string dprsOnly is displayed. (dynamic packet routing system) If the connection is using dprsMcsOnly data path, the string dprsMcsOnly is displayed. If the connection is using dprsMcsFirst data path, the string dprsMcsFirst is displayed.
OBJECT-TYPE    
  AsciiString SIZE(0..32)  

appnDlciVcIntdTable 1.3.6.1.4.1.562.2.4.1.110.3.3.11
This group defines display of interval data collected by Vc. Data in this group is variable and may depend on time when this display command is issued.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDlciVcIntdEntry

appnDlciVcIntdEntry 1.3.6.1.4.1.562.2.4.1.110.3.3.11.1
An entry in the appnDlciVcIntdTable.
OBJECT-TYPE    
  AppnDlciVcIntdEntry  

appnDlciVcCallReferenceNumber 1.3.6.1.4.1.562.2.4.1.110.3.3.11.1.1
This attribute displays the call reference number which is a unique number generated by the switch.The same Call Reference Number is stored in the interval data (accounting record) at both ends of the call. It can be used as one of the attributes in matching duplicate records generated at each end of the call.
OBJECT-TYPE    
  Hex 0..16777215  

appnDlciVcElapsedTimeTillNow 1.3.6.1.4.1.562.2.4.1.110.3.3.11.1.2
This attribute displays the elapsed time representing the period of this interval data. It is elapsed time in 0.1 second increments since Vc started.
OBJECT-TYPE    
  Unsigned32 0..16777215  

appnDlciVcSegmentsRx 1.3.6.1.4.1.562.2.4.1.110.3.3.11.1.3
This attribute displays the number of segments received at the time command was issued. This is the segment received count maintained by accounting at each end of the Vc. This counter is updated only when the packet cannot be successfully delivered out of the sink Vc and to the sink AP Conditions in which packets may be discarded by the sink Vc include: missing packets due to subnet discards, segmentation protocol violations due to subnet discard, duplicated and out-of-ranged packets and packets that arrive while Vc is in path recovery state.
OBJECT-TYPE    
  Unsigned32 0..16777215  

appnDlciVcSegmentsSent 1.3.6.1.4.1.562.2.4.1.110.3.3.11.1.4
This attribute displays the number of segments sent at the time command was issued. This is the segment sent count maintained by accounting at the source Vc. Vc only counts packets that Vc thinks can be delivered successfully into the subnet. In reality, these packets may be dropped by trunking, for instance. This counter is not updated when splitting fails, when Vc is in a path recovery state, when packet forwarding fails to forward this packet and when subsequent packets have to be discarded as we want to minimize the chance of out-of-sequence and do not intentionally send out-of- sequenced packets into the subnet.
OBJECT-TYPE    
  Unsigned32 0..16777215  

appnDlciVcStartTime 1.3.6.1.4.1.562.2.4.1.110.3.3.11.1.5
This attribute displays the start time of this interval period. If Vc spans 12 hour time or time of day change startTime reflects new time as recorded at 12 hour periods or time of day changes.
OBJECT-TYPE    
  EnterpriseDateAndTime SIZE(0 | 19)  

appnDlciVcFrdTable 1.3.6.1.4.1.562.2.4.1.110.3.3.12
This group defines Frame Relay attributes collected by Frame Relay Vc. The purpose of Vc attributes is to aid end users and verification people to understand the Vc internal behavior. This is particularly useful when the network has experienced abnormality and we want to isolate problems and pinpoint trouble spots. Attributes are collected on a per Vc basis. Until a need is identified, statistics are not collected at a processor level. Each attribute is stored in a 32 bit field and is initialized to zero when a Vc enters into the data transfer state. When a PVC is disconnected and then connected again, the attributes will be reset. Attributes cannot be reset through other methods. Frame Relay Vc uses a best effort data packet delivery protocol and a different packet segmentation and combination methods from the General Vc. The Frame Relay Vc uses the same call setup and control mechanism (e.g. the support of non-flow control data packets) as in a General Vc. Most General Vc statistics and internal variables are used in a Frame Relay Vc and are displayed by software developers
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDlciVcFrdEntry

appnDlciVcFrdEntry 1.3.6.1.4.1.562.2.4.1.110.3.3.12.1
An entry in the appnDlciVcFrdTable.
OBJECT-TYPE    
  AppnDlciVcFrdEntry  

appnDlciVcFrmCongestedToSubnet 1.3.6.1.4.1.562.2.4.1.110.3.3.12.1.2
This attribute displays the number of frames from link discarded due to lack of resources. It keeps track of the number of frames from link that have to be discarded. The discard reasons include insufficient memory for splitting the frame into smaller subnet packet size.
OBJECT-TYPE    
  Unsigned32 0..5000  

appnDlciVcCannotForwardToSubnet 1.3.6.1.4.1.562.2.4.1.110.3.3.12.1.3
This attribute displays the number of discarded packets that can not be forwarded into the subnet because of subnet congestion. Number of frames from link discarded due to failure in forwarding a packet from Vc into the subnet.- This attribute is increased when packet forwarding fails to forward a packet into the subnet. If a frame is split into multiple subnet packets and a partial packet has to be discarded, all subsequent partial packets that have not yet been delivered to the subnet will be discarded as well.
OBJECT-TYPE    
  Unsigned32 0..5000  

appnDlciVcNotDataXferToSubnet 1.3.6.1.4.1.562.2.4.1.110.3.3.12.1.4
This attribute records the number of frames from link discarded when the Vc tries to recover from internal path failure.
OBJECT-TYPE    
  Unsigned32 0..5000  

appnDlciVcOutOfRangeFrmFromSubnet 1.3.6.1.4.1.562.2.4.1.110.3.3.12.1.5
This attribute displays the number of frames from subnet discarded due to out of sequence range for arriving too late.
OBJECT-TYPE    
  Unsigned32 0..5000  

appnDlciVcCombErrorsFromSubnet 1.3.6.1.4.1.562.2.4.1.110.3.3.12.1.6
This attribute records the number of subnet packets discarded at the sink Vc due to the Vc segmentation and combination protocol error. Usually, this occurs when the subnet discards packets and thus this statistics can be used to guest the number of subnet packets that are not delivered to the Vc. It cannot be used as an actual measure because some subnet packets may have been delivered to Vc but have to be discarded because these are partial packets to a frame in which some other partial packets have not been properly delivered to Vc
OBJECT-TYPE    
  Unsigned32 0..5000  

appnDlciVcDuplicatesFromSubnet 1.3.6.1.4.1.562.2.4.1.110.3.3.12.1.7
This attribute displays the number of subnet packets discarded due to duplication. Although packets are not retransmitted by the Frame Relay Vc, it is possible for the subnet to retransmit packets. When packets are out-of-sequenced and copies of the same packets arrive, then this attribute is increased.
OBJECT-TYPE    
  Unsigned32 0..5000  

appnDlciVcNotDataXferFromSubnet 1.3.6.1.4.1.562.2.4.1.110.3.3.12.1.8
This attribute displays the number of subnet packets discarded when data transfer is suspended in Vc recovery.
OBJECT-TYPE    
  Unsigned32 0..5000  

appnDlciVcFrmLossTimeouts 1.3.6.1.4.1.562.2.4.1.110.3.3.12.1.9
This attribute displays the number of lost frame timer expiries. When this count is excessive, the network is very congested and packets have been discarded in the subnet.
OBJECT-TYPE    
  Unsigned32 0..5000  

appnDlciVcOoSeqByteCntExceeded 1.3.6.1.4.1.562.2.4.1.110.3.3.12.1.10
This attribute displays the number times that the out of sequence byte threshold is exceeded. When the threshold is exceeded, this condition is treated as if the loss frame timer has expired and all frames queued at the sink Vc are delivered to the AP. We need to keep this count to examine if the threshold is engineered properly. This should be used in conjunction with the peak value of out-of- sequenced queue and the number of times the loss frame timer has expired. This count should be relatively small when compared with loss frame timer expiry count.
OBJECT-TYPE    
  Unsigned32 0..5000  

appnDlciVcPeakOoSeqPktCount 1.3.6.1.4.1.562.2.4.1.110.3.3.12.1.11
This attribute displays the frame relay peak packet count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced queue. The counter can be used to deduce the message buffer requirement on a Vc.
OBJECT-TYPE    
  Unsigned32 0..5000  

appnDlciVcPeakOoSeqFrmForwarded 1.3.6.1.4.1.562.2.4.1.110.3.3.12.1.12
This attribute displays the frame relay peak size of the sequence packet queue. The subnet may deliver packets out-of- sequenced. These packets are then queued in an out-of-sequenced queue, waiting for a packet with the expected sequence number to come. When that packet arrives, this attribute records the maximum number of packets that were out-of-sequenced, but now have become in-sequenced. The statistics is used to measure expected queue size due to normal subnet packet disorder (not due to subnet packet discard). Current implementation also uses this statistics to set a maximum size for the out-of-sequenced queue.
OBJECT-TYPE    
  Unsigned32 0..5000  

appnDlciVcSendSequenceNumber 1.3.6.1.4.1.562.2.4.1.110.3.3.12.1.13
This attribute displays the Vc internal packet's send sequence number. Note that a 'packet' in this context, may be either a user data packet, or an OAM frame.
OBJECT-TYPE    
  Unsigned32 0..5000  

appnDlciVcPktRetryTimeouts 1.3.6.1.4.1.562.2.4.1.110.3.3.12.1.15
This attribute displays the number of packets which have retransmission time-outs. When this count is excessive, the network is very congested and packets have been discarded in the subnet.
OBJECT-TYPE    
  Unsigned32 0..5000  

appnDlciVcPeakRetryQueueSize 1.3.6.1.4.1.562.2.4.1.110.3.3.12.1.16
This attribute displays the peak size of retransmission queue. This attribute is used as an indicator of the acknowledgment behavior across the subnet. Records the largest body of unacknowledged packets.
OBJECT-TYPE    
  Unsigned32 0..5000  

appnDlciVcSubnetRecoveries 1.3.6.1.4.1.562.2.4.1.110.3.3.12.1.17
This attribute displays the number of successful Vc recovery attempts.
OBJECT-TYPE    
  Unsigned32 0..5000  

appnDlciVcOoSeqPktCntExceeded 1.3.6.1.4.1.562.2.4.1.110.3.3.12.1.19
This attribute displays the number times that the out of sequence packet threshold is exceeded. When the threshold is exceeded, this condition is treated as if the loss frame timer has expired and all frames queued at the sink Vc are delivered to the AP. We need to keep this count to examine if the threshold is engineered properly. This should be used in conjunction with the peak value of out-of- sequenced queue and the number of times the loss frame timer has expired. This count should be relatively small when compared with loss frame timer expiry count.
OBJECT-TYPE    
  Unsigned32 0..255  

appnDlciVcPeakOoSeqByteCount 1.3.6.1.4.1.562.2.4.1.110.3.3.12.1.20
This attribute displays the frame relay peak byte count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced queue. The counter can be used to deduce the message buffer requirement on a Vc.
OBJECT-TYPE    
  Unsigned32 0..50000  

appnDlciVcDmepTable 1.3.6.1.4.1.562.2.4.1.110.3.3.417
This attribute displays the data path used by the connection. Data path is provisioned in Dna and DirectCall components. If the connection is using dprsOnly data path, this attribute is empty. If the connection is using dprsMcsOnly or dprsMcsFirst data path, this attribute displays component name of the dprsMcsEndPoint.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDlciVcDmepEntry

appnDlciVcDmepEntry 1.3.6.1.4.1.562.2.4.1.110.3.3.417.1
An entry in the appnDlciVcDmepTable.
OBJECT-TYPE    
  AppnDlciVcDmepEntry  

appnDlciVcDmepValue 1.3.6.1.4.1.562.2.4.1.110.3.3.417.1.1
This variable represents both the value and the index for the appnDlciVcDmepTable.
OBJECT-TYPE    
  RowPointer  

appnDlciBnnLsDef 1.3.6.1.4.1.562.2.4.1.110.3.4
OBJECT IDENTIFIER    

appnDlciBnnLsDefRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.3.4.1
This entry controls the addition and deletion of appnDlciBnnLsDef components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDlciBnnLsDefRowStatusEntry

appnDlciBnnLsDefRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.3.4.1.1
A single entry in the table represents a single appnDlciBnnLsDef component.
OBJECT-TYPE    
  AppnDlciBnnLsDefRowStatusEntry  

appnDlciBnnLsDefRowStatus 1.3.6.1.4.1.562.2.4.1.110.3.4.1.1.1
This variable is used as the basis for SNMP naming of appnDlciBnnLsDef components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

appnDlciBnnLsDefComponentName 1.3.6.1.4.1.562.2.4.1.110.3.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnDlciBnnLsDefStorageType 1.3.6.1.4.1.562.2.4.1.110.3.4.1.1.4
This variable represents the storage type value for the appnDlciBnnLsDef tables.
OBJECT-TYPE    
  StorageType  

appnDlciBnnLsDefIndex 1.3.6.1.4.1.562.2.4.1.110.3.4.1.1.10
This variable represents the index for the appnDlciBnnLsDef tables.
OBJECT-TYPE    
  Integer32 4 | 8 | 12 | 16 | 20 | 24 | 28 | 32 | 36 | 40 | 44 | 48 | 52 | 56 | 60 | 64 | 68 | 72 | 76 | 80 | 84 | 88 | 92 | 96 | 100 | 104 | 108 | 112 | 116 | 120 | 124 | 128 | 132 | 136 | 140 | 144 | 148 | 152 | 156 | 160 | 164 | 168 | 172 | 176 | 180 | 184 | 188 | 192 | 196 | 200 | 204 | 208 | 212 | 216 | 220 | 224 | 228 | 232 | 236 | 240 | 244 | 248 | 252  

appnDlciBnnLsDefProvTable 1.3.6.1.4.1.562.2.4.1.110.3.4.2
This group contains the provisioning data for a Link Station on a frame relay DLCI.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDlciBnnLsDefProvEntry

appnDlciBnnLsDefProvEntry 1.3.6.1.4.1.562.2.4.1.110.3.4.2.1
An entry in the appnDlciBnnLsDefProvTable.
OBJECT-TYPE    
  AppnDlciBnnLsDefProvEntry  

appnDlciBnnLsDefDspuService 1.3.6.1.4.1.562.2.4.1.110.3.4.2.1.1
This attribute specifies which down stream physical unit service is supported on this Link Station.
OBJECT-TYPE    
  INTEGER none(0), dlur(2)  

appnDlciBnnLsDefAdjacentCpName 1.3.6.1.4.1.562.2.4.1.110.3.4.2.1.2
This attribute specifies the fully qualified control point (FQCP) name of the adjacent node. This attribute is ignored if the adjacent node is not an APPN node. If this attribute is not empty it is checked against the name received from the adjacent node during the XID exchange, unless adjacentCpType is set to backLevelLenNode (in which case it is used to identify the adjacent node). The first portion of this name, up to the period, is the network identifier for the network to which the adjacent node belongs. An APPN network is a portion of a virtual private network which has a separately administered name space. This network identifier is the implicit qualifier of all resources which do not have an explicit network identifier.
OBJECT-TYPE    
  AsciiString SIZE(0..17)  

appnDlciBnnLsDefAdjacentCpType 1.3.6.1.4.1.562.2.4.1.110.3.4.2.1.3
This attribute specifies the adjacent control point (CP) type: networkNode - Specifies that the adjacent device is an APPN network node. endNode - Specifies that the adjacent device is an APPN end node. appnNode - Specifies that the adjacent device is an APPN node or an up-level LEN node, and the node type will be dynamically determined during XID exchange. backLevelLenNode - Specifies that the adjacent device is a back- level LEN node. hostXID3 - Specifies that the adjacent device is a host and that this APPN node should respond to a polling XID from the node with a format 3 XID. hostXID0 - Specifies that the adjacent device is a host and that this APPN node should respond to a polling XID from the node with a format 0 XID. dlurXID - Specifies that the adjacent device is a downstream PU requiring DLUR services and XID exchange in link activation dlurNoXID - Specifies that the adjacent device is a downstream PU requiring DLUR services and no XID exchange in link activation
OBJECT-TYPE    
  INTEGER appnNode(0), networkNode(2), endNode(3), backLevelLenNode(5), hostXID3(6), hostXID0(7), dlurXID(8), dlurNoXID(9)  

appnDlciBnnLsDefTgNum 1.3.6.1.4.1.562.2.4.1.110.3.4.2.1.5
This attribute specifies the TG number to be used for this link. It is only relevant if the adjacent device is an APPN node and is ignored otherwise. If adjacentCpType is set to backLevelLenNode this attribute is ignored and the TG number is assumed to be 1. If this attribute is set to zero (0), the TG number is dynamically assigned and can be determined from the tgNum attribute of the related LinkStation component. If this attribute is non-zero, the adjacentCpType must be set to appnNode, networkNode, endNode or backLevelLenNode, and the TG number on the adjacent device must also be set to the same value.
OBJECT-TYPE    
  Unsigned32 0..20  

appnDlciBnnLsDefDlusName 1.3.6.1.4.1.562.2.4.1.110.3.4.2.1.6
This attribute specifies the fully qualified control point (FQCP) name of the primary DLUS for this link station. This attribute is ignored if the adjacent device does not request DLUR services. This attribute overrides the primaryDefDlusName and secondaryDefDlusName specified in the DLUR component. If this attribute is empty, the primaryDefDlusName (specified in the DLUR component), or secondaryDefDlusName (specified in the DLUR component) will be used. The first portion of this name, up to the period, is the network identifier for the network to which the DLUS node belongs. An APPN network is a portion of a virtual private network which has a separately administered name space. This network identifier is the implicit qualifier of all resources which do not have an explicit network identifier.
OBJECT-TYPE    
  AsciiString SIZE(0..17)  

appnDlciBnnLsDefBackupDlusName 1.3.6.1.4.1.562.2.4.1.110.3.4.2.1.7
This attribute specifies the fully qualified control point (FQCP) name of the backup DLUS for this link station. This attribute is ignored if the adjacent device does not request DLUR services. This attribute overrides the primaryDefDlusName and secondaryDefDlusName specified in the DLUR component. If this attribute is empty and the dlusName attribute is empty, the primaryDefDlusName (specified in the DLUR component), or secondaryDefDlusName (specified in the DLUR component) will be used. If this attribute is specified, the dlusName attribute must also contain a non-empty string. The first portion of this name, up to the period, is the network identifier for the network to which the DLUS node belongs. An APPN network is a portion of a virtual private network which has a separately administered name space. This network identifier is the implicit qualifier of all resources which do not have an explicit network identifier.
OBJECT-TYPE    
  AsciiString SIZE(0..17)  

appnDlciBnnLsDefHprSupported 1.3.6.1.4.1.562.2.4.1.110.3.4.2.1.8
This attribute specifies whether high performance routing (HPR) is supported on this link station. If this attribute is set to sameAsNode, and the hprSupport attribute in the APPN component is set to either rtp or anr, HPR will be negotiated with the remote node, if the hprSupport attrbute in the APPN component is set to no HPR will not be negotiated with the remote node. If this attribute is set to no, HPR will not be negotiated on this link station. The results of this negotiation are visible in the hprSupport attribute of the related LinkStation component
OBJECT-TYPE    
  INTEGER no(0), sameAsNode(1)  

appnDlciBnnLsDefAdjacentNodeID 1.3.6.1.4.1.562.2.4.1.110.3.4.2.1.9
This attribute specifies the node id of the adjacent device. This attribute, if non-zero, is used to check the identity of the adjacent device. If this attribute is zero, the identity is not checked. If adjacentCpType is set to dlurNoXID, this attribute is used to identify the downstream PU to the DLUS.
OBJECT-TYPE    
  Hex 0..4294967295  

appnDlciBnnLsDefCpCpSessionSupport 1.3.6.1.4.1.562.2.4.1.110.3.4.2.1.10
This attribute specifies whether this link station supports CP-CP sessions. This attribute is ignored if the adjacent device is not an APPN node.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

appnDlciBnnLsDefMaxTxBtuSize 1.3.6.1.4.1.562.2.4.1.110.3.4.2.1.11
This attribute specifies the maximum basic transmission unit (BTU) size that can be sent on this link station. This attribute is used to negotiate the maximum BTU size that can be transmitted between a link station pair. If the link and node are HPR-capable, then this attribute must be set to a value greater than or equal to 768.
OBJECT-TYPE    
  Unsigned32 99..32768  

appnDlciBnnLsDefLsRole 1.3.6.1.4.1.562.2.4.1.110.3.4.2.1.12
This attribute specifies the role for this link station. This attribute will be ignored if adjacentCpType is set to hostXID0 or hostXID3 (the link station will always be secondary), or if adjacentCpType is set to dlurXID or dlurNoXID (the link station will always be primary).
OBJECT-TYPE    
  INTEGER negotiable(0), primary(1), secondary(2)  

appnDlciSp 1.3.6.1.4.1.562.2.4.1.110.3.5
OBJECT IDENTIFIER    

appnDlciSpRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.3.5.1
This entry controls the addition and deletion of appnDlciSp components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDlciSpRowStatusEntry

appnDlciSpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.3.5.1.1
A single entry in the table represents a single appnDlciSp component.
OBJECT-TYPE    
  AppnDlciSpRowStatusEntry  

appnDlciSpRowStatus 1.3.6.1.4.1.562.2.4.1.110.3.5.1.1.1
This variable is used as the basis for SNMP naming of appnDlciSp components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

appnDlciSpComponentName 1.3.6.1.4.1.562.2.4.1.110.3.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnDlciSpStorageType 1.3.6.1.4.1.562.2.4.1.110.3.5.1.1.4
This variable represents the storage type value for the appnDlciSp tables.
OBJECT-TYPE    
  StorageType  

appnDlciSpIndex 1.3.6.1.4.1.562.2.4.1.110.3.5.1.1.10
This variable represents the index for the appnDlciSp tables.
OBJECT-TYPE    
  NonReplicated  

appnDlciSpParmsTable 1.3.6.1.4.1.562.2.4.1.110.3.5.11
This group contains the provisionable attributes for the Data Link Connection Identifier. These attributes reflect the service parameters specific to this instance of Dlci.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDlciSpParmsEntry

appnDlciSpParmsEntry 1.3.6.1.4.1.562.2.4.1.110.3.5.11.1
An entry in the appnDlciSpParmsTable.
OBJECT-TYPE    
  AppnDlciSpParmsEntry  

appnDlciSpRateEnforcement 1.3.6.1.4.1.562.2.4.1.110.3.5.11.1.1
This attribute specifies whether rate enforcement is to be used on this DLCI. Turning on rate enforcement means that the data sent from the service to the virtual circuit is subjected to rate control.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

appnDlciSpCommittedInformationRate 1.3.6.1.4.1.562.2.4.1.110.3.5.11.1.2
This attribute specifies the committed information rate (cir) in bits per second (bit/s). When rateEnforcement is set to on, cir is the rate at which the network agrees to transfer information under normal conditions. This rate is measured over a measurement interval (t) that is determined internally based on cir and the committed burst size (bc). An exception to this occurs when cir is provisioned to be zero, in which case the measurement interval (t) must be provisioned explicitly. This attribute is ignored when rateEnforcement is off. If rateEnforcement is on and this attribute is 0, bc must also be 0.
OBJECT-TYPE    
  Unsigned32 0..50000000  

appnDlciSpCommittedBurstSize 1.3.6.1.4.1.562.2.4.1.110.3.5.11.1.3
This attribute specifies the committed burst size (bc) in bits. bc is the amount of data that a network agrees to transfer under normal conditions over a measurement interval (t). Data marked DE=1 is not accounted for in bc. This attribute is ignored when rateEnforcement is off. If rateEnforcement is on and this attribute is 0, cir must also be 0.
OBJECT-TYPE    
  Unsigned32 0..50000000  

appnDlciSpExcessBurstSize 1.3.6.1.4.1.562.2.4.1.110.3.5.11.1.4
This attribute specifies the excess burst size (be) in bits. be is the amount of uncommitted data that the network will attempt to deliver over measurement interval (t). Data marked DE=1 by the user or by the network is accounted for here. cir, bc, and be cannot all be 0 when rateEnforcement is on.
OBJECT-TYPE    
  Unsigned32 0..50000000  

appnDlciSpMeasurementInterval 1.3.6.1.4.1.562.2.4.1.110.3.5.11.1.5
This attribute specifies the time interval (in milliseconds) over which rates and burst sizes are measured. When cir and bc are 0 and rateEnforcement is on, this attribute must be provisioned. When cir and bc are non-zero, the time interval is internally calculated. In that situation, this attribute is ignored, and is not representative of the time interval. This attribute is also ignored when rateEnforcement is off. If rateEnforcement is on and both cir and bc are 0, this field must be non-zero.
OBJECT-TYPE    
  Unsigned32 0..25500  

appnDlciBanLsDef 1.3.6.1.4.1.562.2.4.1.110.3.6
OBJECT IDENTIFIER    

appnDlciBanLsDefRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.3.6.1
This entry controls the addition and deletion of appnDlciBanLsDef components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDlciBanLsDefRowStatusEntry

appnDlciBanLsDefRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.3.6.1.1
A single entry in the table represents a single appnDlciBanLsDef component.
OBJECT-TYPE    
  AppnDlciBanLsDefRowStatusEntry  

appnDlciBanLsDefRowStatus 1.3.6.1.4.1.562.2.4.1.110.3.6.1.1.1
This variable is used as the basis for SNMP naming of appnDlciBanLsDef components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

appnDlciBanLsDefComponentName 1.3.6.1.4.1.562.2.4.1.110.3.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnDlciBanLsDefStorageType 1.3.6.1.4.1.562.2.4.1.110.3.6.1.1.4
This variable represents the storage type value for the appnDlciBanLsDef tables.
OBJECT-TYPE    
  StorageType  

appnDlciBanLsDefMacIndex 1.3.6.1.4.1.562.2.4.1.110.3.6.1.1.10
This variable represents an index for the appnDlciBanLsDef tables.
OBJECT-TYPE    
  DashedHexString SIZE(6)  

appnDlciBanLsDefSapIndex 1.3.6.1.4.1.562.2.4.1.110.3.6.1.1.11
This variable represents an index for the appnDlciBanLsDef tables.
OBJECT-TYPE    
  Integer32 4 | 8 | 12 | 16 | 20 | 24 | 28 | 32 | 36 | 40 | 44 | 48 | 52 | 56 | 60 | 64 | 68 | 72 | 76 | 80 | 84 | 88 | 92 | 96 | 100 | 104 | 108 | 112 | 116 | 120 | 124 | 128 | 132 | 136 | 140 | 144 | 148 | 152 | 156 | 160 | 164 | 168 | 172 | 176 | 180 | 184 | 188 | 192 | 196 | 200 | 204 | 208 | 212 | 216 | 220 | 224 | 228 | 232 | 236 | 240 | 244 | 248 | 252  

appnDlciBanLsDefProvTable 1.3.6.1.4.1.562.2.4.1.110.3.6.2
This group contains the provisioning data for a Link Station on a frame relay DLCI.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDlciBanLsDefProvEntry

appnDlciBanLsDefProvEntry 1.3.6.1.4.1.562.2.4.1.110.3.6.2.1
An entry in the appnDlciBanLsDefProvTable.
OBJECT-TYPE    
  AppnDlciBanLsDefProvEntry  

appnDlciBanLsDefDspuService 1.3.6.1.4.1.562.2.4.1.110.3.6.2.1.1
This attribute specifies which down stream physical unit service is supported on this Link Station.
OBJECT-TYPE    
  INTEGER none(0), dlur(2)  

appnDlciBanLsDefAdjacentCpName 1.3.6.1.4.1.562.2.4.1.110.3.6.2.1.2
This attribute specifies the fully qualified control point (FQCP) name of the adjacent node. This attribute is ignored if the adjacent node is not an APPN node. If this attribute is not empty it is checked against the name received from the adjacent node during the XID exchange, unless adjacentCpType is set to backLevelLenNode (in which case it is used to identify the adjacent node). The first portion of this name, up to the period, is the network identifier for the network to which the adjacent node belongs. An APPN network is a portion of a virtual private network which has a separately administered name space. This network identifier is the implicit qualifier of all resources which do not have an explicit network identifier.
OBJECT-TYPE    
  AsciiString SIZE(0..17)  

appnDlciBanLsDefAdjacentCpType 1.3.6.1.4.1.562.2.4.1.110.3.6.2.1.3
This attribute specifies the adjacent control point (CP) type: networkNode - Specifies that the adjacent device is an APPN network node. endNode - Specifies that the adjacent device is an APPN end node. appnNode - Specifies that the adjacent device is an APPN node or an up-level LEN node, and the node type will be dynamically determined during XID exchange. backLevelLenNode - Specifies that the adjacent device is a back- level LEN node. hostXID3 - Specifies that the adjacent device is a host and that this APPN node should respond to a polling XID from the node with a format 3 XID. hostXID0 - Specifies that the adjacent device is a host and that this APPN node should respond to a polling XID from the node with a format 0 XID. dlurXID - Specifies that the adjacent device is a downstream PU requiring DLUR services and XID exchange in link activation dlurNoXID - Specifies that the adjacent device is a downstream PU requiring DLUR services and no XID exchange in link activation
OBJECT-TYPE    
  INTEGER appnNode(0), networkNode(2), endNode(3), backLevelLenNode(5), hostXID3(6), hostXID0(7), dlurXID(8), dlurNoXID(9)  

appnDlciBanLsDefTgNum 1.3.6.1.4.1.562.2.4.1.110.3.6.2.1.5
This attribute specifies the TG number to be used for this link. It is only relevant if the adjacent device is an APPN node and is ignored otherwise. If adjacentCpType is set to backLevelLenNode this attribute is ignored and the TG number is assumed to be 1. If this attribute is set to zero (0), the TG number is dynamically assigned and can be determined from the tgNum attribute of the related LinkStation component. If this attribute is non-zero, the adjacentCpType must be set to appnNode, networkNode, endNode or backLevelLenNode, and the TG number on the adjacent device must also be set to the same value.
OBJECT-TYPE    
  Unsigned32 0..20  

appnDlciBanLsDefDlusName 1.3.6.1.4.1.562.2.4.1.110.3.6.2.1.6
This attribute specifies the fully qualified control point (FQCP) name of the primary DLUS for this link station. This attribute is ignored if the adjacent device does not request DLUR services. This attribute overrides the primaryDefDlusName and secondaryDefDlusName specified in the DLUR component. If this attribute is empty, the primaryDefDlusName (specified in the DLUR component), or secondaryDefDlusName (specified in the DLUR component) will be used. The first portion of this name, up to the period, is the network identifier for the network to which the DLUS node belongs. An APPN network is a portion of a virtual private network which has a separately administered name space. This network identifier is the implicit qualifier of all resources which do not have an explicit network identifier.
OBJECT-TYPE    
  AsciiString SIZE(0..17)  

appnDlciBanLsDefBackupDlusName 1.3.6.1.4.1.562.2.4.1.110.3.6.2.1.7
This attribute specifies the fully qualified control point (FQCP) name of the backup DLUS for this link station. This attribute is ignored if the adjacent device does not request DLUR services. This attribute overrides the primaryDefDlusName and secondaryDefDlusName specified in the DLUR component. If this attribute is empty and the dlusName attribute is empty, the primaryDefDlusName (specified in the DLUR component), or secondaryDefDlusName (specified in the DLUR component) will be used. If this attribute is specified, the dlusName attribute must also contain a non-empty string. The first portion of this name, up to the period, is the network identifier for the network to which the DLUS node belongs. An APPN network is a portion of a virtual private network which has a separately administered name space. This network identifier is the implicit qualifier of all resources which do not have an explicit network identifier.
OBJECT-TYPE    
  AsciiString SIZE(0..17)  

appnDlciBanLsDefHprSupported 1.3.6.1.4.1.562.2.4.1.110.3.6.2.1.8
This attribute specifies whether high performance routing (HPR) is supported on this link station. If this attribute is set to sameAsNode, and the hprSupport attribute in the APPN component is set to either rtp or anr, HPR will be negotiated with the remote node, if the hprSupport attrbute in the APPN component is set to no HPR will not be negotiated with the remote node. If this attribute is set to no, HPR will not be negotiated on this link station. The results of this negotiation are visible in the hprSupport attribute of the related LinkStation component
OBJECT-TYPE    
  INTEGER no(0), sameAsNode(1)  

appnDlciBanLsDefAdjacentNodeID 1.3.6.1.4.1.562.2.4.1.110.3.6.2.1.9
This attribute specifies the node id of the adjacent device. This attribute, if non-zero, is used to check the identity of the adjacent device. If this attribute is zero, the identity is not checked. If adjacentCpType is set to dlurNoXID, this attribute is used to identify the downstream PU to the DLUS.
OBJECT-TYPE    
  Hex 0..4294967295  

appnDlciBanLsDefCpCpSessionSupport 1.3.6.1.4.1.562.2.4.1.110.3.6.2.1.10
This attribute specifies whether this link station supports CP-CP sessions. This attribute is ignored if the adjacent device is not an APPN node.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

appnDlciBanLsDefMaxTxBtuSize 1.3.6.1.4.1.562.2.4.1.110.3.6.2.1.11
This attribute specifies the maximum basic transmission unit (BTU) size that can be sent on this link station. This attribute is used to negotiate the maximum BTU size that can be transmitted between a link station pair. If the link and node are HPR-capable, then this attribute must be set to a value greater than or equal to 768.
OBJECT-TYPE    
  Unsigned32 99..32768  

appnDlciBanLsDefLsRole 1.3.6.1.4.1.562.2.4.1.110.3.6.2.1.12
This attribute specifies the role for this link station. This attribute will be ignored if adjacentCpType is set to hostXID0 or hostXID3 (the link station will always be secondary), or if adjacentCpType is set to dlurXID or dlurNoXID (the link station will always be primary).
OBJECT-TYPE    
  INTEGER negotiable(0), primary(1), secondary(2)  

appnDlciBan 1.3.6.1.4.1.562.2.4.1.110.3.7
OBJECT IDENTIFIER    

appnDlciBanRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.3.7.1
This entry controls the addition and deletion of appnDlciBan components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDlciBanRowStatusEntry

appnDlciBanRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.3.7.1.1
A single entry in the table represents a single appnDlciBan component.
OBJECT-TYPE    
  AppnDlciBanRowStatusEntry  

appnDlciBanRowStatus 1.3.6.1.4.1.562.2.4.1.110.3.7.1.1.1
This variable is used as the basis for SNMP naming of appnDlciBan components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

appnDlciBanComponentName 1.3.6.1.4.1.562.2.4.1.110.3.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnDlciBanStorageType 1.3.6.1.4.1.562.2.4.1.110.3.7.1.1.4
This variable represents the storage type value for the appnDlciBan tables.
OBJECT-TYPE    
  StorageType  

appnDlciBanIndex 1.3.6.1.4.1.562.2.4.1.110.3.7.1.1.10
This variable represents the index for the appnDlciBan tables.
OBJECT-TYPE    
  NonReplicated  

appnDlciBanProvTable 1.3.6.1.4.1.562.2.4.1.110.3.7.2
This group contains the provisioning data for the local link address (MAP,SAP pair) to be used for a Frame Relay connection with BAN encapsulation.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDlciBanProvEntry

appnDlciBanProvEntry 1.3.6.1.4.1.562.2.4.1.110.3.7.2.1
An entry in the appnDlciBanProvTable.
OBJECT-TYPE    
  AppnDlciBanProvEntry  

appnDlciBanLocalMac 1.3.6.1.4.1.562.2.4.1.110.3.7.2.1.1
This attribute specifies the MAC address to be used for a Frame Relay connection with BAN encapsulation.
OBJECT-TYPE    
  DashedHexString SIZE(6)  

appnDlciBanLocalSap 1.3.6.1.4.1.562.2.4.1.110.3.7.2.1.2
This attribute specifies the local SAP number to be used for a Frame Relay connection with BAN encapsulation.
OBJECT-TYPE    
  Hex 4 | 8 | 12 | 16 | 20 | 24 | 28 | 32 | 36 | 40 | 44 | 48 | 52 | 56 | 60 | 64 | 68 | 72 | 76 | 80 | 84 | 88 | 92 | 96 | 100 | 104 | 108 | 112 | 116 | 120 | 124 | 128 | 132 | 136 | 140 | 144 | 148 | 152 | 156 | 160 | 164 | 168 | 172 | 176 | 180 | 184 | 188 | 192 | 196 | 200 | 204 | 208 | 212 | 216 | 220 | 224 | 228 | 232 | 236 | 240 | 244 | 248 | 252  

appnDlciCn 1.3.6.1.4.1.562.2.4.1.110.3.8
OBJECT IDENTIFIER    

appnDlciCnRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.3.8.1
This entry controls the addition and deletion of appnDlciCn components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDlciCnRowStatusEntry

appnDlciCnRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.3.8.1.1
A single entry in the table represents a single appnDlciCn component.
OBJECT-TYPE    
  AppnDlciCnRowStatusEntry  

appnDlciCnRowStatus 1.3.6.1.4.1.562.2.4.1.110.3.8.1.1.1
This variable is used as the basis for SNMP naming of appnDlciCn components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

appnDlciCnComponentName 1.3.6.1.4.1.562.2.4.1.110.3.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnDlciCnStorageType 1.3.6.1.4.1.562.2.4.1.110.3.8.1.1.4
This variable represents the storage type value for the appnDlciCn tables.
OBJECT-TYPE    
  StorageType  

appnDlciCnIndex 1.3.6.1.4.1.562.2.4.1.110.3.8.1.1.10
This variable represents the index for the appnDlciCn tables.
OBJECT-TYPE    
  AsciiStringIndex SIZE(1..17)  

appnDlciStateTable 1.3.6.1.4.1.562.2.4.1.110.3.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDlciStateEntry

appnDlciStateEntry 1.3.6.1.4.1.562.2.4.1.110.3.10.1
An entry in the appnDlciStateTable.
OBJECT-TYPE    
  AppnDlciStateEntry  

appnDlciAdminState 1.3.6.1.4.1.562.2.4.1.110.3.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

appnDlciOperationalState 1.3.6.1.4.1.562.2.4.1.110.3.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

appnDlciUsageState 1.3.6.1.4.1.562.2.4.1.110.3.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

appnDlciSpOpTable 1.3.6.1.4.1.562.2.4.1.110.3.12
This group contains the actual service parameters in use for this instance of Dlci.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDlciSpOpEntry

appnDlciSpOpEntry 1.3.6.1.4.1.562.2.4.1.110.3.12.1
An entry in the appnDlciSpOpTable.
OBJECT-TYPE    
  AppnDlciSpOpEntry  

appnDlciRateEnforcement 1.3.6.1.4.1.562.2.4.1.110.3.12.1.1
This attribute indicates whether rate enforcement is in use for this Dlci.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

appnDlciCommittedInformationRate 1.3.6.1.4.1.562.2.4.1.110.3.12.1.2
This attribute indicates the current effective committed information rate (cir) in bits per second (bit/s). cir is the rate at which the network agrees to transfer data with Discard Eligiblity indication DE=0 under normal conditions. This attribute should be ignored when rateEnforcement is off.
OBJECT-TYPE    
  Gauge32 0..4294967295  

appnDlciCommittedBurstSize 1.3.6.1.4.1.562.2.4.1.110.3.12.1.3
This attribute indicates the committed burst size (bc) in bits. bc is the amount of data that the network agrees to transfer under normal conditions over a measurement interval (t). bc is used for data with Discard Eligibility indication DE=0. DE=1 data does not use bc at all, excessBurstSize if is used instead. This attribute should be ignored when rateEnforcement is off.
OBJECT-TYPE    
  Gauge32 0..4294967295  

appnDlciExcessInformationRate 1.3.6.1.4.1.562.2.4.1.110.3.12.1.4
This attribute indicates the current effective excess information rate (eir) in bits per second (bit/s). eir is the rate at which the network agrees to transfer data with Discard Eligibility indication DE=1 under normal conditions. DE can be set by the user or the network. DE indication of a data frame is set to 1 by the network after cir has been exceeded while eir is still available for data transfer.
OBJECT-TYPE    
  Gauge32 0..4294967295  

appnDlciExcessBurstSize 1.3.6.1.4.1.562.2.4.1.110.3.12.1.5
This attribute indicates the excess burst size (be) in bits. be is the amount of uncommitted data that the network will attempt to deliver over measurement interval (t). Data marked DE=1 by the user or by the network is accounted for here. This attribute should be ignored when rateEnforcement is off.
OBJECT-TYPE    
  Gauge32 0..2048000  

appnDlciMeasurementInterval 1.3.6.1.4.1.562.2.4.1.110.3.12.1.6
This attribute indicates the time interval (in milliseconds) over which rates and burst sizes are measured. This attribute should be ignored when rateEnforcement is off.
OBJECT-TYPE    
  Gauge32 0..25500  

appnLcn 1.3.6.1.4.1.562.2.4.1.110.4
OBJECT IDENTIFIER    

appnLcnRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.4.1
This entry controls the addition and deletion of appnLcn components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnLcnRowStatusEntry

appnLcnRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.4.1.1
A single entry in the table represents a single appnLcn component.
OBJECT-TYPE    
  AppnLcnRowStatusEntry  

appnLcnRowStatus 1.3.6.1.4.1.562.2.4.1.110.4.1.1.1
This variable is used as the basis for SNMP naming of appnLcn components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

appnLcnComponentName 1.3.6.1.4.1.562.2.4.1.110.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnLcnStorageType 1.3.6.1.4.1.562.2.4.1.110.4.1.1.4
This variable represents the storage type value for the appnLcn tables.
OBJECT-TYPE    
  StorageType  

appnLcnIndex 1.3.6.1.4.1.562.2.4.1.110.4.1.1.10
This variable represents the index for the appnLcn tables.
OBJECT-TYPE    
  Integer32 1..4095  

appnLcnDc 1.3.6.1.4.1.562.2.4.1.110.4.2
OBJECT IDENTIFIER    

appnLcnDcRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.4.2.1
This entry controls the addition and deletion of appnLcnDc components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnLcnDcRowStatusEntry

appnLcnDcRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.4.2.1.1
A single entry in the table represents a single appnLcnDc component.
OBJECT-TYPE    
  AppnLcnDcRowStatusEntry  

appnLcnDcRowStatus 1.3.6.1.4.1.562.2.4.1.110.4.2.1.1.1
This variable is used as the basis for SNMP naming of appnLcnDc components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

appnLcnDcComponentName 1.3.6.1.4.1.562.2.4.1.110.4.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnLcnDcStorageType 1.3.6.1.4.1.562.2.4.1.110.4.2.1.1.4
This variable represents the storage type value for the appnLcnDc tables.
OBJECT-TYPE    
  StorageType  

appnLcnDcIndex 1.3.6.1.4.1.562.2.4.1.110.4.2.1.1.10
This variable represents the index for the appnLcnDc tables.
OBJECT-TYPE    
  NonReplicated  

appnLcnDcOptionsTable 1.3.6.1.4.1.562.2.4.1.110.4.2.10
Options group defines attributes associated with direct call. It defines complete connection in terms of path and call options. This connection can be permanent (pvc) or switched (svc). It can have facilities. The total number of bytes of facilities including the facility codes, and all of the facility data from all of the four classes of facilities: CCITT_Facilities DTE_Facilities National_Facilities International_Facilities must not exceed 512 bytes.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnLcnDcOptionsEntry

appnLcnDcOptionsEntry 1.3.6.1.4.1.562.2.4.1.110.4.2.10.1
An entry in the appnLcnDcOptionsTable.
OBJECT-TYPE    
  AppnLcnDcOptionsEntry  

appnLcnDcRemoteNpi 1.3.6.1.4.1.562.2.4.1.110.4.2.10.1.3
RemoteNumbering Plan Indicator (Npi) indicates the numbering plan used in the remoteDna.
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

appnLcnDcRemoteDna 1.3.6.1.4.1.562.2.4.1.110.4.2.10.1.4
This attribute specifies the Data Network Address (Dna) of the remote. This is the called (destination) DTE address (Dna) to which this direct call will be sent. Initially, the called DTE address attribute must be present, that is, there must be a valid destination address. However, it may be possible in the future to configure the direct call with a mnemonic address, in which case, this attribute will contain a zero-length Dna, and the mnemonic address will be carried as one of the facilities.
OBJECT-TYPE    
  DigitString SIZE(1..15)  

appnLcnDcTransferPriority 1.3.6.1.4.1.562.2.4.1.110.4.2.10.1.9
This attribute specifies the transfer priority to network for the outgoing calls using this particular LCN. It overRides the defaultTransferPriority provisioned in its associated Dna component. The transfer priority is a preference specified by an application according to its delay-sensitivity requirement. Frames with high transfer priority are served by the network before the frames with normal priority. Each transfer priority contains a predetermined setting for trunk queue (interrupting, delay or throughput), and routing metric (delay or throughput). When the transfer priority is set at high, the trunk queue is set to high, the routing metric is set to delay. When the transfer priority is set at normal, the trunk queue is set to normal, the routing metric is set to throughput. The default of transferPriority is useDnaDefTP. It means using the provisioning value under defaultTransferPriority of its associated Dna for this DLCI.
OBJECT-TYPE    
  INTEGER normal(0), high(9), useDnaDefTP(255)  

appnLcnDcDiscardPriority 1.3.6.1.4.1.562.2.4.1.110.4.2.10.1.10
This attribute specifies the discard priority for outgoing call using this LCN. The discard priority has three provisioning values: normal, high, and useDnaDefPriority. Traffic with normal priority are discarded first than the traffic with high priority. The Dna default value (provisioned by outDefaultPriority) is taken if this attribute is set to the value useDnaDefPriority. The default of discardPriority is useDnaDefPriority.
OBJECT-TYPE    
  INTEGER normal(0), high(1), useDnaDefPriority(3)  

appnLcnVc 1.3.6.1.4.1.562.2.4.1.110.4.3
OBJECT IDENTIFIER    

appnLcnVcRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.4.3.1
This entry controls the addition and deletion of appnLcnVc components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnLcnVcRowStatusEntry

appnLcnVcRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.4.3.1.1
A single entry in the table represents a single appnLcnVc component.
OBJECT-TYPE    
  AppnLcnVcRowStatusEntry  

appnLcnVcRowStatus 1.3.6.1.4.1.562.2.4.1.110.4.3.1.1.1
This variable is used as the basis for SNMP naming of appnLcnVc components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

appnLcnVcComponentName 1.3.6.1.4.1.562.2.4.1.110.4.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnLcnVcStorageType 1.3.6.1.4.1.562.2.4.1.110.4.3.1.1.4
This variable represents the storage type value for the appnLcnVc tables.
OBJECT-TYPE    
  StorageType  

appnLcnVcIndex 1.3.6.1.4.1.562.2.4.1.110.4.3.1.1.10
This variable represents the index for the appnLcnVc tables.
OBJECT-TYPE    
  NonReplicated  

appnLcnVcCadTable 1.3.6.1.4.1.562.2.4.1.110.4.3.10
This group represents operational call data related to General Vc. It can be displayed only for General Vc which is created by application.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnLcnVcCadEntry

appnLcnVcCadEntry 1.3.6.1.4.1.562.2.4.1.110.4.3.10.1
An entry in the appnLcnVcCadTable.
OBJECT-TYPE    
  AppnLcnVcCadEntry  

appnLcnVcType 1.3.6.1.4.1.562.2.4.1.110.4.3.10.1.1
This attribute displays the type of call, pvc or svc. type is provided at provisioning time.
OBJECT-TYPE    
  INTEGER svc(0), pvc(1)  

appnLcnVcState 1.3.6.1.4.1.562.2.4.1.110.4.3.10.1.2
This attribute displays the state of call control. P5 state is not supported but is listed for completness. Transitions from one state to another take very short time. state most often displayed is dataTransferP4.
OBJECT-TYPE    
  INTEGER creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8)  

appnLcnVcPreviousState 1.3.6.1.4.1.562.2.4.1.110.4.3.10.1.3
This attribute displays the previous state of call control. This is a valuable field to determine how the processing is progressing.
OBJECT-TYPE    
  INTEGER creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8)  

appnLcnVcDiagnosticCode 1.3.6.1.4.1.562.2.4.1.110.4.3.10.1.4
This attribute displays the internal substate of call control. It is used to further refine state of call processing.
OBJECT-TYPE    
  Unsigned32 0..255  

appnLcnVcPreviousDiagnosticCode 1.3.6.1.4.1.562.2.4.1.110.4.3.10.1.5
This attribute displays the internal substate of call control. It is used to further refine state of call processing.
OBJECT-TYPE    
  Unsigned32 0..255  

appnLcnVcCalledNpi 1.3.6.1.4.1.562.2.4.1.110.4.3.10.1.6
This attribute displays the Numbering Plan Indicator (NPI) of the called end.
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

appnLcnVcCalledDna 1.3.6.1.4.1.562.2.4.1.110.4.3.10.1.7
This attribute displays the Data Network Address (Dna) of the called (destination) DTE to which this call is sent. This address if defined at recieving end will complete Vc connection.
OBJECT-TYPE    
  DigitString SIZE(1..15)  

appnLcnVcCalledLcn 1.3.6.1.4.1.562.2.4.1.110.4.3.10.1.8
This attribute displays the Logical Channel Number of the called end. It is valid only after both ends of Vc exchanged relevant information.
OBJECT-TYPE    
  Unsigned32 1..65535  

appnLcnVcCallingNpi 1.3.6.1.4.1.562.2.4.1.110.4.3.10.1.9
This attribute displays the Numbering Plan Indicator (NPI) of the calling end.
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

appnLcnVcCallingDna 1.3.6.1.4.1.562.2.4.1.110.4.3.10.1.10
This attribute displays the Data Network Address (Dna) of the calling end.
OBJECT-TYPE    
  DigitString SIZE(1..15)  

appnLcnVcCallingLcn 1.3.6.1.4.1.562.2.4.1.110.4.3.10.1.11
This attribute displays the Logical Channel Number of the calling end.
OBJECT-TYPE    
  Unsigned32 1..65535  

appnLcnVcAccountingEnabled 1.3.6.1.4.1.562.2.4.1.110.4.3.10.1.12
This attribute indicates that this optional section of accounting record is suppressed or permitted. If accountingEnabled is yes, conditions for generation of accounting record were met. These conditions include billing options, vc recovery conditions and Module wide accounting data options.
OBJECT-TYPE    
  INTEGER yes(0), no(1)  

appnLcnVcFastSelectCall 1.3.6.1.4.1.562.2.4.1.110.4.3.10.1.13
This attribute displays that this is a fast select call.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

appnLcnVcLocalRxPktSize 1.3.6.1.4.1.562.2.4.1.110.4.3.10.1.14
This attribute displays the locally negotiated size of send packets.
OBJECT-TYPE    
  INTEGER unknown(0), n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12)  

appnLcnVcLocalTxPktSize 1.3.6.1.4.1.562.2.4.1.110.4.3.10.1.15
This attribute displays the locally negotiated size of send packets.
OBJECT-TYPE    
  INTEGER unknown(0), n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12)  

appnLcnVcLocalTxWindowSize 1.3.6.1.4.1.562.2.4.1.110.4.3.10.1.16
This attribute displays the send window size provided on incoming call packets or the default when a call request packet does not explicitly provide the window size.
OBJECT-TYPE    
  Unsigned32 0..127  

appnLcnVcLocalRxWindowSize 1.3.6.1.4.1.562.2.4.1.110.4.3.10.1.17
This attribute displays the receive window size provided on incoming call packets or the default when a call request does not explicitly provide the window sizes.
OBJECT-TYPE    
  Unsigned32 0..127  

appnLcnVcPathReliability 1.3.6.1.4.1.562.2.4.1.110.4.3.10.1.19
This attribute displays the path reliability.
OBJECT-TYPE    
  INTEGER high(0), normal(1)  

appnLcnVcAccountingEnd 1.3.6.1.4.1.562.2.4.1.110.4.3.10.1.20
This attribute indicates if this end should generate an accounting record. Normally, callingEnd is the end to generate an accounting record.
OBJECT-TYPE    
  INTEGER callingEnd(0), calledEnd(1)  

appnLcnVcPriority 1.3.6.1.4.1.562.2.4.1.110.4.3.10.1.21
This attribute displays whether the call is a normal or a high priority call.
OBJECT-TYPE    
  INTEGER normal(0), high(1)  

appnLcnVcSegmentSize 1.3.6.1.4.1.562.2.4.1.110.4.3.10.1.22
This attribute displays the segment size (in bytes) used on the call. It is used to calculate the number of segments transmitted and received.
OBJECT-TYPE    
  Unsigned32 0..4096  

appnLcnVcSubnetTxPktSize 1.3.6.1.4.1.562.2.4.1.110.4.3.10.1.23
This attribute displays the locally negotiated size of the data packets on this Vc.
OBJECT-TYPE    
  INTEGER unknown(0), n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12)  

appnLcnVcSubnetTxWindowSize 1.3.6.1.4.1.562.2.4.1.110.4.3.10.1.24
This attribute displays the current send window size of Vc.
OBJECT-TYPE    
  Unsigned32 0..4096  

appnLcnVcSubnetRxPktSize 1.3.6.1.4.1.562.2.4.1.110.4.3.10.1.25
This attribute displays the locally negotiated size of receive packets.
OBJECT-TYPE    
  INTEGER unknown(0), n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12)  

appnLcnVcSubnetRxWindowSize 1.3.6.1.4.1.562.2.4.1.110.4.3.10.1.26
This attribute displays the receive window size provided on incoming call packets and to the default when a call request does not explicitly provide the window sizes.
OBJECT-TYPE    
  Unsigned32 0..4096  

appnLcnVcMaxSubnetPktSize 1.3.6.1.4.1.562.2.4.1.110.4.3.10.1.27
This attribute displays the maximum packet size allowed on Vc.
OBJECT-TYPE    
  Unsigned32 0..4096  

appnLcnVcTransferPriorityToNetwork 1.3.6.1.4.1.562.2.4.1.110.4.3.10.1.28
This attribute displays the priority in which data is transferred to the network. The transfer priority is a preference specified by an application according to its delay-sensitivity requirement. Frames with high transfer priority are served by the network before the frames with normal priority. Each transfer priority contains a predetermined setting for trunk queue (interrupting, delay or throughput), and routing metric (delay or throughput). When the transfer priority is set at high, the trunk queue is set to high, the routing metric is set to delay. When the transfer priority is set at normal, the trunk queue is set to normal, the routing metric is set to throughput.
OBJECT-TYPE    
  INTEGER normal(0), high(9)  

appnLcnVcTransferPriorityFromNetwork 1.3.6.1.4.1.562.2.4.1.110.4.3.10.1.29
This attribute displays the priority in which data is transferred from the network. The transfer priority is a preference specified by an application according to its delay-sensitivity requirement. Frames with high transfer priority are served by the network before the frames with normal priority. Each transfer priority contains a predetermined setting for trunk queue (interrupting, delay or throughput), and routing metric (delay or throughput). When the transfer priority is set at high, and the trunk queue is set to high, the routing metric is set to delay. When the transfer priority is set at normal, the trunk queue is set to normal, and the routing metric is set to throughput.
OBJECT-TYPE    
  INTEGER normal(0), high(9)  

appnLcnVcIntdTable 1.3.6.1.4.1.562.2.4.1.110.4.3.11
This group defines display of interval data collected by Vc. Data in this group is variable and may depend on time when this display command is issued.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnLcnVcIntdEntry

appnLcnVcIntdEntry 1.3.6.1.4.1.562.2.4.1.110.4.3.11.1
An entry in the appnLcnVcIntdTable.
OBJECT-TYPE    
  AppnLcnVcIntdEntry  

appnLcnVcCallReferenceNumber 1.3.6.1.4.1.562.2.4.1.110.4.3.11.1.1
This attribute displays the call reference number which is a unique number generated by the switch.The same Call Reference Number is stored in the interval data (accounting record) at both ends of the call. It can be used as one of the attributes in matching duplicate records generated at each end of the call.
OBJECT-TYPE    
  Hex 0..16777215  

appnLcnVcElapsedTimeTillNow 1.3.6.1.4.1.562.2.4.1.110.4.3.11.1.2
This attribute displays the elapsed time representing the period of this interval data. It is elapsed time in 0.1 second increments since Vc started.
OBJECT-TYPE    
  Unsigned32 0..16777215  

appnLcnVcSegmentsRx 1.3.6.1.4.1.562.2.4.1.110.4.3.11.1.3
This attribute displays the number of segments received at the time command was issued. This is the segment received count maintained by accounting at each end of the Vc. This counter is updated only when the packet cannot be successfully delivered out of the sink Vc and to the sink AP Conditions in which packets may be discarded by the sink Vc include: missing packets due to subnet discards, segmentation protocol violations due to subnet discard, duplicated and out-of-ranged packets and packets that arrive while Vc is in path recovery state.
OBJECT-TYPE    
  Unsigned32 0..16777215  

appnLcnVcSegmentsSent 1.3.6.1.4.1.562.2.4.1.110.4.3.11.1.4
This attribute displays the number of segments sent at the time command was issued. This is the segment sent count maintained by accounting at the source Vc. Vc only counts packets that Vc thinks can be delivered successfully into the subnet. In reality, these packets may be dropped by trunking, for instance. This counter is not updated when splitting fails, when Vc is in a path recovery state, when packet forwarding fails to forward this packet and when subsequent packets have to be discarded as we want to minimize the chance of out-of-sequence and do not intentionally send out-of- sequenced packets into the subnet.
OBJECT-TYPE    
  Unsigned32 0..16777215  

appnLcnVcStartTime 1.3.6.1.4.1.562.2.4.1.110.4.3.11.1.5
This attribute displays the start time of this interval period. If Vc spans 12 hour time or time of day change startTime reflects new time as recorded at 12 hour periods or time of day changes.
OBJECT-TYPE    
  EnterpriseDateAndTime SIZE(0 | 19)  

appnLcnVcStatsTable 1.3.6.1.4.1.562.2.4.1.110.4.3.12
... Statistics(Stats) This group defines general attributes collected by general Vc. The purpose of Vc attributes is to aid end users and verification people to understand the Vc internal behavior. This is particularly useful when the network has experienced abnormality and we want to isolate problems and pinpoint trouble spots. Attributes are collected on a per Vc basis. Until a need is identified, statistics are not collected at a processor level. Each attribute is stored in a 32 bit field and is initialized to zero when a Vc enters into the data transfer state. When a PVC is disconnected and then connected again, the attributes will be reset. Attributes cannot be reset through other methods.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnLcnVcStatsEntry

appnLcnVcStatsEntry 1.3.6.1.4.1.562.2.4.1.110.4.3.12.1
An entry in the appnLcnVcStatsTable.
OBJECT-TYPE    
  AppnLcnVcStatsEntry  

appnLcnVcAckStackingTimeouts 1.3.6.1.4.1.562.2.4.1.110.4.3.12.1.1
This attribute counts the number of ack stacking timer expiries. It is used as an indicator of the acknowledgment behavior across the subnet when ack stacking is in effect. If it expires often, usually this means end users will experience longer delay. The ack stacking timer specifies how long the Vc will wait before finally sending the subnet acknowledgment. if this attribute is set to a value of 0, then the Vc will automatically return acknowledgment packets without delay. If this attribute is set to a value other than zero, then the Vc will wait for this amount of time in an attempt to piggyback the acknowledgment packet on another credit or data packet. If the Vc cannot piggyback the acknowledgment packet within this time, then the packet is returned without piggybacking.
OBJECT-TYPE    
  Unsigned32 0..5000  

appnLcnVcOutOfRangeFrmFromSubnet 1.3.6.1.4.1.562.2.4.1.110.4.3.12.1.2
This attribute counts the number of subnet frames discarded due to the sequence number being out of range. Two Categories apply for the General Vc 1) lost Acks (previous Range) 2) unexpected Packets (next Range) Vc internally maintains its own sequence number of packet order and sequencing. Due to packet retransmission, Vc may receive duplicate packets that have the same Vc internal sequence number. Only 1 copy is accepted by the Vc and other copies of the same packets are detected through this count. This attribute can be used to record the frequency of packet retransmission due to Vc and other part of the subnet.
OBJECT-TYPE    
  Unsigned32 0..5000  

appnLcnVcDuplicatesFromSubnet 1.3.6.1.4.1.562.2.4.1.110.4.3.12.1.3
This attribute counts the number of subnet packets discarded due to duplication. It is used to detect software error fault or duplication caused by retransmitting.
OBJECT-TYPE    
  Unsigned32 0..5000  

appnLcnVcFrmRetryTimeouts 1.3.6.1.4.1.562.2.4.1.110.4.3.12.1.4
This attribute counts the number of frames which have retransmission time-out. If packets from Vc into the subnet are discarded by the subnet, the source Vc will not receive any acknowledgment. The retransmission timer then expires and packets will be retransmitted again. Note that the Vc idle probe may be retransmitted and is included in this count. This statistics does not show the distribution of how many times packets are retransmitted (e.g. first retransmission results in successful packet forwarding).
OBJECT-TYPE    
  Unsigned32 0..5000  

appnLcnVcPeakRetryQueueSize 1.3.6.1.4.1.562.2.4.1.110.4.3.12.1.5
This attribute indicates the peak size of the retransmission queue. This attribute is used as an indicator of the acknowledgment behavior across the subnet. It records the largest body of unacknowledged packets.
OBJECT-TYPE    
  Unsigned32 0..5000  

appnLcnVcPeakOoSeqQueueSize 1.3.6.1.4.1.562.2.4.1.110.4.3.12.1.6
This attribute indicates the peak size of the out of sequence queue. This attribute is used as an indicator of the sequencing behavior across the subnet. It records the largest body of out of sequence packets.
OBJECT-TYPE    
  Unsigned32 0..5000  

appnLcnVcPeakOoSeqFrmForwarded 1.3.6.1.4.1.562.2.4.1.110.4.3.12.1.7
This attribute indicates the peak size of the sequence packet queue. This attribute is used as an indicator of the sequencing behavior across the subnet. It records the largest body of out of sequence packets, which by the receipt of an expected packet have been transformed to expected packets. The number of times this peak is reached is not recorded as it is traffic dependent.
OBJECT-TYPE    
  Unsigned32 0..5000  

appnLcnVcPeakStackedAcksRx 1.3.6.1.4.1.562.2.4.1.110.4.3.12.1.8
This attribute indicates the peak size of wait acks. This attribute is used as an indicator of the acknowledgment behavior across the subnet. It records the largest collective acknowledgment.
OBJECT-TYPE    
  Unsigned32 0..5000  

appnLcnVcSubnetRecoveries 1.3.6.1.4.1.562.2.4.1.110.4.3.12.1.9
This attribute counts the number of successful Vc recovery attempts. This attribute is used as an indicator of how many times the Vc path is broken but can be recovered. This attribute is useful to record the number of network path failures.
OBJECT-TYPE    
  Unsigned32 0..5000  

appnLcnVcWindowClosuresToSubnet 1.3.6.1.4.1.562.2.4.1.110.4.3.12.1.10
This attribute counts the number of window closures to subnet. A packet may have been sent into the subnet but its acknowledgment from the remote Vc has not yet been received. This is a 8 bit sequence number.This number is useful in detecting whether the Vc is sending any packet into the subnet.
OBJECT-TYPE    
  Unsigned32 0..5000  

appnLcnVcWindowClosuresFromSubnet 1.3.6.1.4.1.562.2.4.1.110.4.3.12.1.11
This attribute counts the number of window closures from subnet. This attribute is useful in detecting whether the Vc is receiving any packet from the subnet.
OBJECT-TYPE    
  Unsigned32 0..5000  

appnLcnVcWrTriggers 1.3.6.1.4.1.562.2.4.1.110.4.3.12.1.12
This attribute displays the number of times the Vc stays within the W-R region. The W-R region is a value used to determined the timing of credit transmission. Should the current window size be beneath this value, the credits will be transmitted immediately. Otherwise, they will be transmitted later with actual data. The wrTriggers statistic is therefore used to analyze the flow control and credit mechanism.
OBJECT-TYPE    
  Unsigned32 0..5000  

appnLcnStateTable 1.3.6.1.4.1.562.2.4.1.110.4.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnLcnStateEntry

appnLcnStateEntry 1.3.6.1.4.1.562.2.4.1.110.4.10.1
An entry in the appnLcnStateTable.
OBJECT-TYPE    
  AppnLcnStateEntry  

appnLcnAdminState 1.3.6.1.4.1.562.2.4.1.110.4.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

appnLcnOperationalState 1.3.6.1.4.1.562.2.4.1.110.4.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

appnLcnUsageState 1.3.6.1.4.1.562.2.4.1.110.4.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

appnPort 1.3.6.1.4.1.562.2.4.1.110.5
OBJECT IDENTIFIER    

appnPortRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.5.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of appnPort components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnPortRowStatusEntry

appnPortRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.5.1.1
A single entry in the table represents a single appnPort component.
OBJECT-TYPE    
  AppnPortRowStatusEntry  

appnPortRowStatus 1.3.6.1.4.1.562.2.4.1.110.5.1.1.1
This variable is used as the basis for SNMP naming of appnPort components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

appnPortComponentName 1.3.6.1.4.1.562.2.4.1.110.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnPortStorageType 1.3.6.1.4.1.562.2.4.1.110.5.1.1.4
This variable represents the storage type value for the appnPort tables.
OBJECT-TYPE    
  StorageType  

appnPortIndex 1.3.6.1.4.1.562.2.4.1.110.5.1.1.10
This variable represents the index for the appnPort tables.
OBJECT-TYPE    
  AsciiStringIndex SIZE(1..8)  

appnPortConfigTable 1.3.6.1.4.1.562.2.4.1.110.5.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Learned attributes of a SNA Port.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnPortConfigEntry

appnPortConfigEntry 1.3.6.1.4.1.562.2.4.1.110.5.10.1
An entry in the appnPortConfigTable.
OBJECT-TYPE    
  AppnPortConfigEntry  

appnPortType 1.3.6.1.4.1.562.2.4.1.110.5.10.1.1
This attribute specifies the type of line used by the port. The possible values are: nonSwitched - switched - sharedAccessFacilities -
OBJECT-TYPE    
  INTEGER nonSwitched(1), switched(2), sharedAccessFacilities(3)  

appnPortMaxRxBtuSize 1.3.6.1.4.1.562.2.4.1.110.5.10.1.2
This is the maximum basic transmission unit (BTU) size that can be received. The BTU is the unit of data and control information passed between path control components.
OBJECT-TYPE    
  Unsigned32 0..65535  

appnPortMaxTxBtuSize 1.3.6.1.4.1.562.2.4.1.110.5.10.1.3
This is the maximum basic transmission unit (BTU) size that can be sent. The BTU is the unit of data and control information passed between path control components.
OBJECT-TYPE    
  Unsigned32 0..65535  

appnPortTotLinkActLim 1.3.6.1.4.1.562.2.4.1.110.5.10.1.4
This is the total link activation limit. This is the maximum number of active adjacent link stations the port will support. This value limits the number of adjacent link stations that can be concurrently connected to the local node through this port. The limit includes adjacent link stations connected by both inbound and outbound link activations. The distinction of inbound or outbound for link activations is used to indicate which node initiated the connection. For inbound link activations, the adjacent link station initiates the connection with the local link station. For outbound link activations, the local node initiates the connection with the adjacent link station. totLinkActLim must be greater than either inbLinkActLim or outLinkActLim, but it should not greater than the sum of inbLinkActLim and outLinkActLim.
OBJECT-TYPE    
  Unsigned32 0..99  

appnPortInbLinkActLim 1.3.6.1.4.1.562.2.4.1.110.5.10.1.5
This is the inbound link activation limit. This is the maximum number of link stations which can be simultaneously active as a result of connection initiations from adjacent nodes.
OBJECT-TYPE    
  Unsigned32 0..99  

appnPortOutLinkActLim 1.3.6.1.4.1.562.2.4.1.110.5.10.1.6
This is the outbound link activation limit. This is the maximum number of link stations which can be simultaneously active as a result of connection initiations by the local node.
OBJECT-TYPE    
  Unsigned32 0..99  

appnPortLsRole 1.3.6.1.4.1.562.2.4.1.110.5.10.1.7
This is the initial role of the port's local link station when communicating with an adjacent link station. The possible options are negotiable, primary and secondary.
OBJECT-TYPE    
  INTEGER primary(1), secondary(2), negotiable(3)  

appnPortActXidExchLim 1.3.6.1.4.1.562.2.4.1.110.5.10.1.8
This is the exchange limit for activation XIDs.
OBJECT-TYPE    
  Unsigned32 0..65535  

appnPortNonactXidExchLim 1.3.6.1.4.1.562.2.4.1.110.5.10.1.9
This is the exchange limit for non-activation XIDs.
OBJECT-TYPE    
  Unsigned32 0..65535  

appnPortLsXmitRxCap 1.3.6.1.4.1.562.2.4.1.110.5.10.1.10
This is Link Station transmit/receive capability. This is either tws (two-way simultaneous (full-duplex)) or twa (two-way alternate (half-duplex)).
OBJECT-TYPE    
  INTEGER twa(0), tws(1)  

appnPortMaxIfrmRxWindow 1.3.6.1.4.1.562.2.4.1.110.5.10.1.11
This is the maximum number of I-frames that can be received by the local link stations before an acknowledgment is sent.
OBJECT-TYPE    
  Unsigned32 1..127  

appnPortTargetPacingCount 1.3.6.1.4.1.562.2.4.1.110.5.10.1.12
This is the desired pacing window size for BINDs on this transmission group. The number is significant only when fixed BIND pacing is being performed.
OBJECT-TYPE    
  Unsigned32 0..65535  

appnPortOperTable 1.3.6.1.4.1.562.2.4.1.110.5.11
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Operational attributes of a SNA Port.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnPortOperEntry

appnPortOperEntry 1.3.6.1.4.1.562.2.4.1.110.5.11.1
An entry in the appnPortOperTable.
OBJECT-TYPE    
  AppnPortOperEntry  

appnPortState 1.3.6.1.4.1.562.2.4.1.110.5.11.1.1
The attribute represents the current operational state of the port. The value can be any of the following: inactive - pendingActive - active - pendingInactive -
OBJECT-TYPE    
  INTEGER inactive(1), pendingActive(2), active(3), pendingInactive(4)  

appnPortDlcType 1.3.6.1.4.1.562.2.4.1.110.5.11.1.2
Type of the DLC interface used by this port. Possible values are: sdlc - synchronous data link control x25 - QLLC logical link control tokenRing - IEEE 802.2 logical link control frameRelay - RFC1490 and IEEE 802.2 logical link control other - dlc type other than those listed above.
OBJECT-TYPE    
  INTEGER other(1), sdlc(2), tokenRing(6), frameRelay(30), x25(31)  

appnPortSimRim 1.3.6.1.4.1.562.2.4.1.110.5.11.1.3
This attribute indicates whether Set Initialization Mode (SIM) and Receive Initialization Mode (RIM) are supported.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

appnPortDefinedLsGoodXids 1.3.6.1.4.1.562.2.4.1.110.5.11.1.4
This is the total number of successful XIDs that have been received on all of the defined link stations on this port since the last time this port was started.
OBJECT-TYPE    
  PassportCounter64  

appnPortDefinedLsBadXids 1.3.6.1.4.1.562.2.4.1.110.5.11.1.5
This attributes contains the total number of unsuccessful XIDs that have been received on all of the defined link stations on this port since the last time this port was started.
OBJECT-TYPE    
  PassportCounter64  

appnPortDynLsGoodXids 1.3.6.1.4.1.562.2.4.1.110.5.11.1.6
This is the total number of successful XIDs that have been received on all of the dynamic link stations on this port since the last time this port was started.
OBJECT-TYPE    
  PassportCounter64  

appnPortDynLsBadXids 1.3.6.1.4.1.562.2.4.1.110.5.11.1.7
This is the total number of unsuccessful XIDs that have been received on all of the dynamic link stations on this port since the last time this port was started.
OBJECT-TYPE    
  PassportCounter64  

appnPortTgCharTable 1.3.6.1.4.1.562.2.4.1.110.5.12
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** These attributes of the link station are in a group using a common structure. This set provides the TG characteristics of the link through this link station for route selection.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnPortTgCharEntry

appnPortTgCharEntry 1.3.6.1.4.1.562.2.4.1.110.5.12.1
An entry in the appnPortTgCharTable.
OBJECT-TYPE    
  AppnPortTgCharEntry  

appnPortEffectiveCap 1.3.6.1.4.1.562.2.4.1.110.5.12.1.1
The effective capacity is an integer value that indicates the capacity in kilo bits per second. It is derived from the link bandwidth and the maximum load factor with the range of 0 thru 603,979,776.
OBJECT-TYPE    
  INTEGER min(0), n170bps(1), n190bps(2), n210bps(3), n230bps(4), n240bps(5), n260bps(6), n280bps(7), n300bps(8), n340bps(9), n380bps(10), n410bps(11), n450bps(12), n490bps(13), n530bps(14), n560bps(15), n600bps(16), n680bps(17), n750bps(18), n830bps(19), n900bps(20), n980bps(21), n1050bps(22), n1130bps(23), n1200bps(24), n1350bps(25), n1500bps(26), n1700bps(27), n1800bps(28), n2000bps(29), n2100bps(30), n2300bps(31), n2400bps(32), n2700bps(33), n3000bps(34), n3300bps(35), n3600bps(36), n3900bps(37), n4200bps(38), n4500bps(39), n4800bps(40), n5400bps(41), n6000bps(42), n6600bps(43), n7200bps(44), n7800bps(45), n8400bps(46), n9000bps(47), n9600bps(48), n10800bps(49), n12000bps(50), n13200bps(51), n14400bps(52), n15600bps(53), n17kbps(54), n18kbps(55), n19kbps(56), n22kbps(57), n24kbps(58), n26kbps(59), n29kbps(60), n31kbps(61), n34kbps(62), n36kbps(63), n38kbps(64), n43kbps(65), n48kbps(66), n53kbps(67), n58kbps(68), n62kbps(69), n67kbps(70), n72kbps(71), n77kbps(72), n86kbps(73), n96kbps(74), n106kbps(75), n115kbps(76), n125kbps(77), n134kbps(78), n144kbps(79), n154kbps(80), n170kbps(81), n190kbps(82), n210kbps(83), n230kbps(84), n250kbps(85), n270kbps(86), n290kbps(87), n310kbps(88), n350kbps(89), n380kbps(90), n420kbps(91), n460kbps(92), n500kbps(93), n540kbps(94), n580kbps(95), n610kbps(96), n690kbps(97), n770kbps(98), n840kbps(99), n920kbps(100), n1000kbps(101), n1080kbps(102), n1150kbps(103), n1230kbps(104), n1380kbps(105), n1540kbps(106), n1700kbps(107), n1800kbps(108), n2000kbps(109), n2200kbps(110), n2300kbps(111), n2500kbps(112), n2800kbps(113), n3100kbps(114), n3400kbps(115), n3700kbps(116), n4000kbps(117), n4300kbps(118), n4600kbps(119), n4900kbps(120), n5500kbps(121), n6100kbps(122), n6800kbps(123), n7400kbps(124), n8000kbps(125), n8600kbps(126), n9200kbps(127), n9800kbps(128), n11100kbps(129), n12300kbps(130), n13500kbps(131), n14700kbps(132), n16Mbps(133), n17Mbps(134), n18Mbps(135), n20Mbps(136), n22Mbps(137), n25Mbps(138), n27Mbps(139), n29Mbps(140), n32Mbps(141), n34Mbps(142), n37Mbps(143), n39Mbps(144), n44Mbps(145), n49Mbps(146), n54Mbps(147), n59Mbps(148), n64Mbps(149), n69Mbps(150), n74Mbps(151), n79Mbps(152), n88Mbps(153), n98Mbps(154), n108Mbps(155), n118Mbps(156), n128Mbps(157), n138Mbps(158), n147Mbps(159), n157Mbps(160), n180Mbps(161), n200Mbps(162), n220Mbps(163), n240Mbps(164), n260Mbps(165), n280Mbps(166), n290Mbps(167), n310Mbps(168), n350Mbps(169), n390Mbps(170), n430Mbps(171), n470Mbps(172), n510Mbps(173), n550Mbps(174), n590Mbps(175), n630Mbps(176), n710Mbps(177), n790Mbps(178), n870Mbps(179), n940Mbps(180), n1020Mbps(181), n1100Mbps(182), n1180Mbps(183), n1260Mbps(184), n1420Mbps(185), n1570Mbps(186), n1700Mbps(187), n1900Mbps(188), n2000Mbps(189), n2200Mbps(190), n2400Mbps(191), n2500Mbps(192), n2800Mbps(193), n3100Mbps(194), n3500Mbps(195), n3800Mbps(196), n4100Mbps(197), n4400Mbps(198), n4700Mbps(199), n5000Mbps(200), n5700Mbps(201), n6300Mbps(202), n6900Mbps(203), n7500Mbps(204), n8200Mbps(205), n8800Mbps(206), n9400Mbps(207), n10100Mbps(208), n11300Mbps(209), n12600Mbps(210), n13800Mbps(211), n15100Mbps(212), n16Gbps(213), n18Gbps(214), n19Gbps(215), n20Gbps(216), n23Gbps(217), n25Gbps(218), n28Gbps(219), n30Gbps(220), n33Gbps(221), n35Gbps(222), n38Gbps(223), n40Gbps(224), n45Gbps(225), n50Gbps(226), n55Gbps(227), n60Gbps(228), n65Gbps(229), n70Gbps(230), n75Gbps(231), n81Gbps(232), n91Gbps(233), n101Gbps(234), n111Gbps(235), n121Gbps(236), n131Gbps(237), n141Gbps(238), n151Gbps(239), n160Gbps(240), n180Gbps(241), n200Gbps(242), n220Gbps(243), n240Gbps(244), n260Gbps(245), n280Gbps(246), n300Gbps(247), n320Gbps(248), n360Gbps(249), n400Gbps(250), n440Gbps(251), n480Gbps(252), n520Gbps(253), n560Gbps(254), n600Gbps(255)  

appnPortConnectCost 1.3.6.1.4.1.562.2.4.1.110.5.12.1.2
The cost-per-connect time is a characteristic represented by a single-byte value in the range 0 to 255 that expresses a relative cost of using a transmission group. The units for cost-per-connect time are installation-defined and are typically based on the applicable tariffs of the transmission facility being used by the transmission group. The cost-per-connect time values that a network administrator assigns to the transmission groups in a network should reflect the relative expense of each transmission group as compared to all other transmission groups in the network. A value of 0 means that the cost of connecting over the transmission group is at no additional cost (as in the case of a non-switched facility.
OBJECT-TYPE    
  INTEGER 0..255  

appnPortByteCost 1.3.6.1.4.1.562.2.4.1.110.5.12.1.3
Cost-per-byte is a single byte value in the range 0 to 255 that expresses a relative cost of transmitting a byte over the associated transmission group. The units for cost-per-byte are user-defined. Like cost-per-connect-time, cost-per-byte is network specific and will not be uniform across networks unless assignments are coordinated.
OBJECT-TYPE    
  INTEGER 0..255  

appnPortSecurity 1.3.6.1.4.1.562.2.4.1.110.5.12.1.4
This static characteristic indicates the level of security protection. The security values are architecturally defined to provide continuity across all networks. Currently, security is encoded as one of the following seven values: guardedRadiation - guarded conduit containing the transmission medium; protected against physical and radiation tapping. encrypted - link level encryption is provided unknown - has not been determined guardedConduit - guarded conduit; protected against physical tapping secureConduit - secure conduit, not guarded; e.g. pressurized pipe undergroundCable - underground cable located in a secure country publicSwitchedNetwork - public switched network; secure in the sense that there is no predetermined route that traffic will take nonSecure - all else, e.g. satellite-connected, located in a nonsecure country.
OBJECT-TYPE    
  INTEGER unKnown(0), nonSecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192)  

appnPortPropagationDelay 1.3.6.1.4.1.562.2.4.1.110.5.12.1.5
The propagation delay is the length of time that it takes for a signal to propagate from one end of the transmission group to the other. Typical values are: minimum - minimum negligible - 400 microsec terrestrial - 10 msec packetSwitched - 150 msec long - 300 msec
OBJECT-TYPE    
  INTEGER minimum(0), negligible(76), terrestrial(113), packetSwitched(145), long(153)  

appnPortUserDefinedParm1 1.3.6.1.4.1.562.2.4.1.110.5.12.1.7
This is the user defined routing parameter in range 0-255.
OBJECT-TYPE    
  Unsigned32 0..255  

appnPortUserDefinedParm2 1.3.6.1.4.1.562.2.4.1.110.5.12.1.8
This is the user defined routing parameter in range 0-255.
OBJECT-TYPE    
  Unsigned32 0..255  

appnPortUserDefinedParm3 1.3.6.1.4.1.562.2.4.1.110.5.12.1.9
This is the user defined routing parameter in range 0-255.
OBJECT-TYPE    
  Unsigned32 0..255  

appnLs 1.3.6.1.4.1.562.2.4.1.110.6
OBJECT IDENTIFIER    

appnLsRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.6.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of appnLs components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnLsRowStatusEntry

appnLsRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.6.1.1
A single entry in the table represents a single appnLs component.
OBJECT-TYPE    
  AppnLsRowStatusEntry  

appnLsRowStatus 1.3.6.1.4.1.562.2.4.1.110.6.1.1.1
This variable is used as the basis for SNMP naming of appnLs components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

appnLsComponentName 1.3.6.1.4.1.562.2.4.1.110.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnLsStorageType 1.3.6.1.4.1.562.2.4.1.110.6.1.1.4
This variable represents the storage type value for the appnLs tables.
OBJECT-TYPE    
  StorageType  

appnLsIndex 1.3.6.1.4.1.562.2.4.1.110.6.1.1.10
This variable represents the index for the appnLs tables.
OBJECT-TYPE    
  AsciiStringIndex SIZE(1..8)  

appnLsLsVcReferenceTable 1.3.6.1.4.1.562.2.4.1.110.6.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This identifies which physical interface is associated with this link station.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnLsLsVcReferenceEntry

appnLsLsVcReferenceEntry 1.3.6.1.4.1.562.2.4.1.110.6.10.1
An entry in the appnLsLsVcReferenceTable.
OBJECT-TYPE    
  AppnLsLsVcReferenceEntry  

appnLsName 1.3.6.1.4.1.562.2.4.1.110.6.10.1.1
This string identifies which physical interface the link station is associated with.
OBJECT-TYPE    
  RowPointer  

appnLsSap 1.3.6.1.4.1.562.2.4.1.110.6.10.1.2
This attribute indicates the SAP number of the device assigned to this link station. This field is only valid for dlcType of llc2. If the dlcType is not llc2, this field will be 0.
OBJECT-TYPE    
  Hex 0..252  

appnLsConfigTable 1.3.6.1.4.1.562.2.4.1.110.6.11
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the attributes that define the behavior of a SNA link station.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnLsConfigEntry

appnLsConfigEntry 1.3.6.1.4.1.562.2.4.1.110.6.11.1
An entry in the appnLsConfigTable.
OBJECT-TYPE    
  AppnLsConfigEntry  

appnLsPortName 1.3.6.1.4.1.562.2.4.1.110.6.11.1.1
This attribute contains the name of the port associated with this link station.
OBJECT-TYPE    
  AsciiString SIZE(1..8)  

appnLsFeatures 1.3.6.1.4.1.562.2.4.1.110.6.11.1.4
Various optional features of a link station. autoActSupp If present specifies that the link can be activated automatically when required by a session. A link cannot be automatically activated from an independent LU session unless it has been started previously. The link cannot be defined to support CP-CP sessions and to be auto-activatable because this might cause inconsistent network behavior. limitedResource If present, specifies that this link station is to be deactivated when there are no sessions using the link. Note that link stations on a non- switched port cannot be configured as limited resource. backLvlLenEn If present, specifies that this link is to a back level LEN End Node. cpCpSessSupport If present, specifies that CP-CP sessions are supported by this link station. Description of bits: autoActSupp(0) limitedResource(1) backLvlLenEn(2) cpCpSessSupport(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

appnLsMaxTxBtuSize 1.3.6.1.4.1.562.2.4.1.110.6.11.1.6
This is the maximum basic transmission unit (BTU) size that can be sent. The BTU is the unit of data and control information passed between path control components.
OBJECT-TYPE    
  Unsigned32 0..32767  

appnLsOperTable 1.3.6.1.4.1.562.2.4.1.110.6.12
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Operational data of the link station.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnLsOperEntry

appnLsOperEntry 1.3.6.1.4.1.562.2.4.1.110.6.12.1
An entry in the appnLsOperTable.
OBJECT-TYPE    
  AppnLsOperEntry  

appnLsDlcType 1.3.6.1.4.1.562.2.4.1.110.6.12.1.1
This attribute indicates the type of data link control that this LS is associated. Possible types are: sdlc - synchronous data link control x25 - QLLC logical link control tokenRing - IEEE 802.2 logical link control llc2 - RFC1490 and IEEE 802.2 logical link control. other - dlc type other than those listed above.
OBJECT-TYPE    
  INTEGER other(1), sdlc(2), tokenRing(6), llc2(30), x25(31)  

appnLsLinkStationState 1.3.6.1.4.1.562.2.4.1.110.6.12.1.2
This the current state of the link station. The possible values are: inactive - active - pendingActive - pendingInactive -
OBJECT-TYPE    
  INTEGER inactive(1), pendingActive(2), active(3), pendingInactive(4)  

appnLsLinkStationSubState 1.3.6.1.4.1.562.2.4.1.110.6.12.1.3
This is the current sub-state of the link station. The possible values are: inactive, sentReqOpnstn, pendXidExch, sentActAs, sendSetMode, active, sentDeactAsOrd, sentDiscOrd, sentDestroyTg, sentCreateTg, sentConnReq,pendRcvConnInd, pendSendConnRsp, sentConnRsp, pendDeact. These are described in the APPN Architecture reference
OBJECT-TYPE    
  INTEGER inactive(1), sentReqOpnstn(2), pendXidExch(3), sentActAs(4), sentSentMode(5), active(6), sentDeactAsOrd(7), sentDiscOrd(8), sentDestroyTg(9), sentCreateTg(10), sentConnReq(11), pendRcvConnInd(12), pendSendConnRsp(13), sentConnRsp(14), pendDeact(15)  

appnLsActSessCount 1.3.6.1.4.1.562.2.4.1.110.6.12.1.4
This is the total number of active sessions (both endpoint and intermediate) using this link.
OBJECT-TYPE    
  Gauge32 0..65535  

appnLsActualCpName 1.3.6.1.4.1.562.2.4.1.110.6.12.1.5
This is the actual network qualified adjacent control point (CP) name as determined from the XID 3 exchange.
OBJECT-TYPE    
  AsciiString SIZE(3..17)  

appnLsActualCpType 1.3.6.1.4.1.562.2.4.1.110.6.12.1.6
This is the actual type of adjacent node type as determined during contact negotiation. The possible types are: endNode lowEntryNode networkNode toBeDetermine
OBJECT-TYPE    
  INTEGER toBeDetermined(0), networkNode(1), endNode(2), lowEntryNode(4)  

appnLsDlcName 1.3.6.1.4.1.562.2.4.1.110.6.12.1.7
This is the name of the port group associated with the port through which this link station is attached.
OBJECT-TYPE    
  AsciiString SIZE(1..8)  

appnLsDynamicOrDefined 1.3.6.1.4.1.562.2.4.1.110.6.12.1.8
This attribute reflects whether the link was created explicitly or dynamically (either in response to a connection request from the adjacent node, or to connect dynamically to another node across a connection network). The possible values are dynamic or defined.
OBJECT-TYPE    
  INTEGER dynamic(1), defined(2)  

appnLsMigration 1.3.6.1.4.1.562.2.4.1.110.6.12.1.9
This attribute specifies whether the adjacent node is a migration level node, such as a low entry networking or LEN node.
OBJECT-TYPE    
  INTEGER yes(1), no(2), unknown(3)  

appnLsTgNum 1.3.6.1.4.1.562.2.4.1.110.6.12.1.10
This is the number associated with the transmission group using this link station. It can be used to distinguish it from other transmission groups to the same adjacent node.
OBJECT-TYPE    
  Unsigned32 0..255  

appnLsHprSupport 1.3.6.1.4.1.562.2.4.1.110.6.12.1.11
This is the type of High Performance Routing (HPR) being used on this link station. It is one of anr, rtp or none. The value in this attribute are bounded by the values provisioned on this node and the attached node.
OBJECT-TYPE    
  INTEGER none(0), anr(1), rtp(2)  

appnLsAnrLabel 1.3.6.1.4.1.562.2.4.1.110.6.12.1.12
This is the HPR ANR label associated with this link station.
OBJECT-TYPE    
  Hex 0..65535  

appnLsTgCharTable 1.3.6.1.4.1.562.2.4.1.110.6.13
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** These attributes of the link station are in a group using a common structure. This set provides the TG characteristics of the link through this link station for route selection.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnLsTgCharEntry

appnLsTgCharEntry 1.3.6.1.4.1.562.2.4.1.110.6.13.1
An entry in the appnLsTgCharTable.
OBJECT-TYPE    
  AppnLsTgCharEntry  

appnLsEffectiveCap 1.3.6.1.4.1.562.2.4.1.110.6.13.1.1
The effective capacity is an integer value that indicates the capacity in kilo bits per second. It is derived from the link bandwidth and the maximum load factor with the range of 0 thru 603,979,776.
OBJECT-TYPE    
  INTEGER min(0), n170bps(1), n190bps(2), n210bps(3), n230bps(4), n240bps(5), n260bps(6), n280bps(7), n300bps(8), n340bps(9), n380bps(10), n410bps(11), n450bps(12), n490bps(13), n530bps(14), n560bps(15), n600bps(16), n680bps(17), n750bps(18), n830bps(19), n900bps(20), n980bps(21), n1050bps(22), n1130bps(23), n1200bps(24), n1350bps(25), n1500bps(26), n1700bps(27), n1800bps(28), n2000bps(29), n2100bps(30), n2300bps(31), n2400bps(32), n2700bps(33), n3000bps(34), n3300bps(35), n3600bps(36), n3900bps(37), n4200bps(38), n4500bps(39), n4800bps(40), n5400bps(41), n6000bps(42), n6600bps(43), n7200bps(44), n7800bps(45), n8400bps(46), n9000bps(47), n9600bps(48), n10800bps(49), n12000bps(50), n13200bps(51), n14400bps(52), n15600bps(53), n17kbps(54), n18kbps(55), n19kbps(56), n22kbps(57), n24kbps(58), n26kbps(59), n29kbps(60), n31kbps(61), n34kbps(62), n36kbps(63), n38kbps(64), n43kbps(65), n48kbps(66), n53kbps(67), n58kbps(68), n62kbps(69), n67kbps(70), n72kbps(71), n77kbps(72), n86kbps(73), n96kbps(74), n106kbps(75), n115kbps(76), n125kbps(77), n134kbps(78), n144kbps(79), n154kbps(80), n170kbps(81), n190kbps(82), n210kbps(83), n230kbps(84), n250kbps(85), n270kbps(86), n290kbps(87), n310kbps(88), n350kbps(89), n380kbps(90), n420kbps(91), n460kbps(92), n500kbps(93), n540kbps(94), n580kbps(95), n610kbps(96), n690kbps(97), n770kbps(98), n840kbps(99), n920kbps(100), n1000kbps(101), n1080kbps(102), n1150kbps(103), n1230kbps(104), n1380kbps(105), n1540kbps(106), n1700kbps(107), n1800kbps(108), n2000kbps(109), n2200kbps(110), n2300kbps(111), n2500kbps(112), n2800kbps(113), n3100kbps(114), n3400kbps(115), n3700kbps(116), n4000kbps(117), n4300kbps(118), n4600kbps(119), n4900kbps(120), n5500kbps(121), n6100kbps(122), n6800kbps(123), n7400kbps(124), n8000kbps(125), n8600kbps(126), n9200kbps(127), n9800kbps(128), n11100kbps(129), n12300kbps(130), n13500kbps(131), n14700kbps(132), n16Mbps(133), n17Mbps(134), n18Mbps(135), n20Mbps(136), n22Mbps(137), n25Mbps(138), n27Mbps(139), n29Mbps(140), n32Mbps(141), n34Mbps(142), n37Mbps(143), n39Mbps(144), n44Mbps(145), n49Mbps(146), n54Mbps(147), n59Mbps(148), n64Mbps(149), n69Mbps(150), n74Mbps(151), n79Mbps(152), n88Mbps(153), n98Mbps(154), n108Mbps(155), n118Mbps(156), n128Mbps(157), n138Mbps(158), n147Mbps(159), n157Mbps(160), n180Mbps(161), n200Mbps(162), n220Mbps(163), n240Mbps(164), n260Mbps(165), n280Mbps(166), n290Mbps(167), n310Mbps(168), n350Mbps(169), n390Mbps(170), n430Mbps(171), n470Mbps(172), n510Mbps(173), n550Mbps(174), n590Mbps(175), n630Mbps(176), n710Mbps(177), n790Mbps(178), n870Mbps(179), n940Mbps(180), n1020Mbps(181), n1100Mbps(182), n1180Mbps(183), n1260Mbps(184), n1420Mbps(185), n1570Mbps(186), n1700Mbps(187), n1900Mbps(188), n2000Mbps(189), n2200Mbps(190), n2400Mbps(191), n2500Mbps(192), n2800Mbps(193), n3100Mbps(194), n3500Mbps(195), n3800Mbps(196), n4100Mbps(197), n4400Mbps(198), n4700Mbps(199), n5000Mbps(200), n5700Mbps(201), n6300Mbps(202), n6900Mbps(203), n7500Mbps(204), n8200Mbps(205), n8800Mbps(206), n9400Mbps(207), n10100Mbps(208), n11300Mbps(209), n12600Mbps(210), n13800Mbps(211), n15100Mbps(212), n16Gbps(213), n18Gbps(214), n19Gbps(215), n20Gbps(216), n23Gbps(217), n25Gbps(218), n28Gbps(219), n30Gbps(220), n33Gbps(221), n35Gbps(222), n38Gbps(223), n40Gbps(224), n45Gbps(225), n50Gbps(226), n55Gbps(227), n60Gbps(228), n65Gbps(229), n70Gbps(230), n75Gbps(231), n81Gbps(232), n91Gbps(233), n101Gbps(234), n111Gbps(235), n121Gbps(236), n131Gbps(237), n141Gbps(238), n151Gbps(239), n160Gbps(240), n180Gbps(241), n200Gbps(242), n220Gbps(243), n240Gbps(244), n260Gbps(245), n280Gbps(246), n300Gbps(247), n320Gbps(248), n360Gbps(249), n400Gbps(250), n440Gbps(251), n480Gbps(252), n520Gbps(253), n560Gbps(254), n600Gbps(255)  

appnLsConnectCost 1.3.6.1.4.1.562.2.4.1.110.6.13.1.2
The cost-per-connect time is a characteristic represented by a single-byte value in the range 0 to 255 that expresses a relative cost of using a transmission group. The units for cost-per-connect time are installation-defined and are typically based on the applicable tariffs of the transmission facility being used by the transmission group. The cost-per-connect time values that a network administrator assigns to the transmission groups in a network should reflect the relative expense of each transmission group as compared to all other transmission groups in the network. A value of 0 means that the cost of connecting over the transmission group is at no additional cost (as in the case of a non-switched facility.
OBJECT-TYPE    
  INTEGER 0..255  

appnLsByteCost 1.3.6.1.4.1.562.2.4.1.110.6.13.1.3
Cost-per-byte is a single byte value in the range 0 to 255 that expresses a relative cost of transmitting a byte over the associated transmission group. The units for cost-per-byte are user-defined. Like cost-per-connect-time, cost-per-byte is network specific and will not be uniform across networks unless assignments are coordinated.
OBJECT-TYPE    
  INTEGER 0..255  

appnLsSecurity 1.3.6.1.4.1.562.2.4.1.110.6.13.1.4
This static characteristic indicates the level of security protection. The security values are architecturally defined to provide continuity across all networks. Currently, security is encoded as one of the following seven values: guardedRadiation - guarded conduit containing the transmission medium; protected against physical and radiation tapping. encrypted - link level encryption is provided unknown - has not been determined guardedConduit - guarded conduit; protected against physical tapping secureConduit - secure conduit, not guarded; e.g. pressurized pipe undergroundCable - underground cable located in a secure country publicSwitchedNetwork - public switched network; secure in the sense that there is no predetermined route that traffic will take nonSecure - all else, e.g. satellite-connected, located in a nonsecure country.
OBJECT-TYPE    
  INTEGER unKnown(0), nonSecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192)  

appnLsPropagationDelay 1.3.6.1.4.1.562.2.4.1.110.6.13.1.5
The propagation delay is the length of time that it takes for a signal to propagate from one end of the transmission group to the other. Typical values are: minimum - minimum negligible - 400 microsec terrestrial - 10 msec packetSwitched - 150 msec long - 300 msec
OBJECT-TYPE    
  INTEGER minimum(0), negligible(76), terrestrial(113), packetSwitched(145), long(153)  

appnLsUserDefinedParm1 1.3.6.1.4.1.562.2.4.1.110.6.13.1.7
This is the user defined routing parameter in range 0-255.
OBJECT-TYPE    
  Unsigned32 0..255  

appnLsUserDefinedParm2 1.3.6.1.4.1.562.2.4.1.110.6.13.1.8
This is the user defined routing parameter in range 0-255.
OBJECT-TYPE    
  Unsigned32 0..255  

appnLsUserDefinedParm3 1.3.6.1.4.1.562.2.4.1.110.6.13.1.9
This is the user defined routing parameter in range 0-255.
OBJECT-TYPE    
  Unsigned32 0..255  

appnLsStatsTable 1.3.6.1.4.1.562.2.4.1.110.6.14
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational statistics of the link station.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnLsStatsEntry

appnLsStatsEntry 1.3.6.1.4.1.562.2.4.1.110.6.14.1
An entry in the appnLsStatsTable.
OBJECT-TYPE    
  AppnLsStatsEntry  

appnLsInXidBytes 1.3.6.1.4.1.562.2.4.1.110.6.14.1.1
This attribute counts the total number of XID bytes received on this link station.
OBJECT-TYPE    
  PassportCounter64  

appnLsInMsgBytes 1.3.6.1.4.1.562.2.4.1.110.6.14.1.2
This attribute counts the total number of message (I-frame) bytes received on this link station.
OBJECT-TYPE    
  PassportCounter64  

appnLsInXidFrames 1.3.6.1.4.1.562.2.4.1.110.6.14.1.3
This attribute counts the total number of XID frames received on this link station.
OBJECT-TYPE    
  PassportCounter64  

appnLsInMsgFrames 1.3.6.1.4.1.562.2.4.1.110.6.14.1.4
This attribute counts the total number of message (I-frame) frames received on this link station.
OBJECT-TYPE    
  PassportCounter64  

appnLsOutXidBytes 1.3.6.1.4.1.562.2.4.1.110.6.14.1.5
This attribute counts the total number of XID bytes sent on this link station.
OBJECT-TYPE    
  PassportCounter64  

appnLsOutMsgBytes 1.3.6.1.4.1.562.2.4.1.110.6.14.1.6
This attribute counts the total number of message (I-frame) bytes sent on this link station.
OBJECT-TYPE    
  PassportCounter64  

appnLsOutXidFrames 1.3.6.1.4.1.562.2.4.1.110.6.14.1.7
This attribute counts the total number of XID frames sent on this link station.
OBJECT-TYPE    
  PassportCounter64  

appnLsOutMsgFrames 1.3.6.1.4.1.562.2.4.1.110.6.14.1.8
This attribute counts the total number of message (I-frame) frames sent on this link station.
OBJECT-TYPE    
  PassportCounter64  

appnLsInInvalidSnaFrames 1.3.6.1.4.1.562.2.4.1.110.6.14.1.9
This attribute counts the total number of invalid SNA frames received on this link station.
OBJECT-TYPE    
  PassportCounter64  

appnLsInSessionControlFrames 1.3.6.1.4.1.562.2.4.1.110.6.14.1.10
This attribute counts the total number of session control frames received on this link station.
OBJECT-TYPE    
  PassportCounter64  

appnLsOutSessionControlFrames 1.3.6.1.4.1.562.2.4.1.110.6.14.1.11
This attribute counts the total number of session control frames sent on this link station.
OBJECT-TYPE    
  PassportCounter64  

appnLsEchoResponse 1.3.6.1.4.1.562.2.4.1.110.6.14.1.12
This attribute counts the total number of echo responses returned from the adjacent node. A response should be returned for each test frame sent by this node. Echo requests are sent periodically to gauge the propagation delay to the adjacent node.
OBJECT-TYPE    
  PassportCounter64  

appnLsCurrentDelay 1.3.6.1.4.1.562.2.4.1.110.6.14.1.13
This attribute counts the time (in milliseconds) that it took for the last test signal to be sent and returned from this link station to the adjacent link station.
OBJECT-TYPE    
  PassportCounter64  

appnLsMaxDelay 1.3.6.1.4.1.562.2.4.1.110.6.14.1.14
This is the longest time taken (in milliseconds) for a test signal to be sent and returned from this link station to the adjacent link station.
OBJECT-TYPE    
  PassportCounter64  

appnLsMinDelay 1.3.6.1.4.1.562.2.4.1.110.6.14.1.15
This is the shortest time taken (in milliseconds) for a test signal to be sent and returned from this link station to the adjacent link station.
OBJECT-TYPE    
  PassportCounter64  

appnLsGoodXids 1.3.6.1.4.1.562.2.4.1.110.6.14.1.17
This attribute contains the total number of successful XIDs that have been received on this link station since it was started.
OBJECT-TYPE    
  PassportCounter64  

appnLsBadXids 1.3.6.1.4.1.562.2.4.1.110.6.14.1.18
This attribute contains the total number of unsuccessful XIDs that have been received on this link station since it was started.
OBJECT-TYPE    
  PassportCounter64  

appnDirEnt 1.3.6.1.4.1.562.2.4.1.110.7
OBJECT IDENTIFIER    

appnDirEntRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.7.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of appnDirEnt components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDirEntRowStatusEntry

appnDirEntRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.7.1.1
A single entry in the table represents a single appnDirEnt component.
OBJECT-TYPE    
  AppnDirEntRowStatusEntry  

appnDirEntRowStatus 1.3.6.1.4.1.562.2.4.1.110.7.1.1.1
This variable is used as the basis for SNMP naming of appnDirEnt components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

appnDirEntComponentName 1.3.6.1.4.1.562.2.4.1.110.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnDirEntStorageType 1.3.6.1.4.1.562.2.4.1.110.7.1.1.4
This variable represents the storage type value for the appnDirEnt tables.
OBJECT-TYPE    
  StorageType  

appnDirEntIndex 1.3.6.1.4.1.562.2.4.1.110.7.1.1.10
This variable represents the index for the appnDirEnt tables.
OBJECT-TYPE    
  AsciiStringIndex SIZE(1..17)  

appnDirEntOperTable 1.3.6.1.4.1.562.2.4.1.110.7.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group defines the attributes of the Directory Entry server.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDirEntOperEntry

appnDirEntOperEntry 1.3.6.1.4.1.562.2.4.1.110.7.10.1
An entry in the appnDirEntOperTable.
OBJECT-TYPE    
  AppnDirEntOperEntry  

appnDirEntServerName 1.3.6.1.4.1.562.2.4.1.110.7.10.1.1
The fully-qualified control point (CP) name of the network node server. For unassociated end node entries, the end node fully- qualified name is returned.
OBJECT-TYPE    
  AsciiString SIZE(3..17)  

appnDirEntLuOwnerName 1.3.6.1.4.1.562.2.4.1.110.7.10.1.2
It is the fully-qualified CP name of the node at which the LU is located. This name is the same as the serving NN name when the LU is located at a network node or an unassociated end node. It is also the same as the fully-qualified LU name when this is the control point LU for this node.
OBJECT-TYPE    
  AsciiString SIZE(3..17)  

appnDirEntLocation 1.3.6.1.4.1.562.2.4.1.110.7.10.1.3
Specifies the location of the resource. This may be one of the following: The resource is at the local node. The resource belongs to an attached end node. The resource is not within the domain of the local node.
OBJECT-TYPE    
  INTEGER local(0), domain(1), xdomain(2)  

appnDirEntEntryType 1.3.6.1.4.1.562.2.4.1.110.7.10.1.4
Specifies whether the type of the directory entry is: cache - The LU has previously been located by a broadcast search and the location information has been saved. home - The LU is in the domain of the local network node and the LU information has been configured at the local node. register - The LU is at an end node that is in the domain of the local network node. Registered entries are registered by the served end node.
OBJECT-TYPE    
  INTEGER cache(0), register(2), home(3)  

appnDirEntWildCard 1.3.6.1.4.1.562.2.4.1.110.7.10.1.5
It indicates the type of wildcard used for the resources used for LEN node.
OBJECT-TYPE    
  INTEGER other(1), explicit(2), partialWildcard(3), fullWildcard(4)  

appnAdjNn 1.3.6.1.4.1.562.2.4.1.110.8
OBJECT IDENTIFIER    

appnAdjNnRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.8.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of appnAdjNn components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnAdjNnRowStatusEntry

appnAdjNnRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.8.1.1
A single entry in the table represents a single appnAdjNn component.
OBJECT-TYPE    
  AppnAdjNnRowStatusEntry  

appnAdjNnRowStatus 1.3.6.1.4.1.562.2.4.1.110.8.1.1.1
This variable is used as the basis for SNMP naming of appnAdjNn components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

appnAdjNnComponentName 1.3.6.1.4.1.562.2.4.1.110.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnAdjNnStorageType 1.3.6.1.4.1.562.2.4.1.110.8.1.1.4
This variable represents the storage type value for the appnAdjNn tables.
OBJECT-TYPE    
  StorageType  

appnAdjNnIndex 1.3.6.1.4.1.562.2.4.1.110.8.1.1.10
This variable represents the index for the appnAdjNn tables.
OBJECT-TYPE    
  AsciiStringIndex SIZE(1..17)  

appnAdjNnOperTable 1.3.6.1.4.1.562.2.4.1.110.8.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** These operational attributes are only available for network nodes which are directly attached to the current node. They are in a separate group.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnAdjNnOperEntry

appnAdjNnOperEntry 1.3.6.1.4.1.562.2.4.1.110.8.10.1
An entry in the appnAdjNnOperTable.
OBJECT-TYPE    
  AppnAdjNnOperEntry  

appnAdjNnCpCpSessStatus 1.3.6.1.4.1.562.2.4.1.110.8.10.1.1
Indicates the state of CP-CP sessions between this node and adjacent network and end nodes. Inactive indicates no CP-CP sessions exists between this node and the adjacent node. Active indicates CP-CP sessions are active using both the ConWinner and ConLoser sessions. The session initiated by this node is referred to as the ConWinner session and is used by this node to send to the adjacent node. The ConLoser session is initiated by the adjacent node and is used by this node to receive from the adjacent node.
OBJECT-TYPE    
  INTEGER active(1), conLoserActive(2), conWinnerActive(3), inactive(4)  

appnAdjNnOutOfSeqTdus 1.3.6.1.4.1.562.2.4.1.110.8.10.1.2
Number of out of sequence topology database updates (TDU) received from this node.
OBJECT-TYPE    
  PassportCounter64  

appnAdjNnLastFrsnSent 1.3.6.1.4.1.562.2.4.1.110.8.10.1.3
Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last TDU sent to this adjacent node.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

appnAdjNnLastFrsnReceived 1.3.6.1.4.1.562.2.4.1.110.8.10.1.4
Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last TDU received from this adjacent node.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

appnNn 1.3.6.1.4.1.562.2.4.1.110.9
OBJECT IDENTIFIER    

appnNnRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.9.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of appnNn components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnNnRowStatusEntry

appnNnRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.9.1.1
A single entry in the table represents a single appnNn component.
OBJECT-TYPE    
  AppnNnRowStatusEntry  

appnNnRowStatus 1.3.6.1.4.1.562.2.4.1.110.9.1.1.1
This variable is used as the basis for SNMP naming of appnNn components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

appnNnComponentName 1.3.6.1.4.1.562.2.4.1.110.9.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnNnStorageType 1.3.6.1.4.1.562.2.4.1.110.9.1.1.4
This variable represents the storage type value for the appnNn tables.
OBJECT-TYPE    
  StorageType  

appnNnIndex 1.3.6.1.4.1.562.2.4.1.110.9.1.1.10
This variable represents the index for the appnNn tables.
OBJECT-TYPE    
  AsciiStringIndex SIZE(1..17)  

appnNnOperTable 1.3.6.1.4.1.562.2.4.1.110.9.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Operational attributes of a network node in the topology database.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnNnOperEntry

appnNnOperEntry 1.3.6.1.4.1.562.2.4.1.110.9.10.1
An entry in the appnNnOperTable.
OBJECT-TYPE    
  AppnNnOperEntry  

appnNnDaysLeft 1.3.6.1.4.1.562.2.4.1.110.9.10.1.2
The number of days before deletion of this node entry from the Topology Database. This is set to zero for the local node entry, which always exists.
OBJECT-TYPE    
  Unsigned32 1..15  

appnNnNodeType 1.3.6.1.4.1.562.2.4.1.110.9.10.1.3
Type of the APPN node. Possible values are networkNode (nn) and virtualRoutingNode (vrn).
OBJECT-TYPE    
  INTEGER toBeDetermined(0), networkNode(1), virtualRoutingNode(3)  

appnNnResourceSequenceNumber 1.3.6.1.4.1.562.2.4.1.110.9.10.1.4
Resource sequence number. This is assigned by the network node that owns this resource.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

appnNnRouteAdditionResistance 1.3.6.1.4.1.562.2.4.1.110.9.10.1.5
Route addition resistance indicates the relative desirability of using this node for intermediate session traffic. This value is used for route computation. The lower the value, the more desirable the node is for intermediate routing.
OBJECT-TYPE    
  INTEGER 0..255  

appnNnStatus 1.3.6.1.4.1.562.2.4.1.110.9.10.1.6
This attribute specifies the status of the node. This may be one or more of the following: congested - If present, indicates that this node is congested. This node is not be included in route selection by other nodes when this congestion exists. irrDepleted - If present, indicates that intermediate session routing resources are depleted. This node is not included in intermediate route selection by other nodes when resources are depleted. SNMP APPN MIB = ibmappnNnNodeIsrDepleted errDepleted - If present, indicates that session endpoint resources are depleted. quiescing - If present, indicates that the node is quiescing. This node is not included in route selection by other nodes when the node is quiescing. Description of bits: congested(0) irrDepleted(1) errDepleted(2) quiescing(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

appnNnFunctionSupported 1.3.6.1.4.1.562.2.4.1.110.9.10.1.7
This attribute specifies which functions are supported. This may be one or more of the following: borderNode - If present, indicates that border node functionality is supported. centralDirectoryServer -If present, indicates that the node is a central directory. gateway - If present, indicates that the node provides gateway functions. isr - If present, indicates that the node supports intermediate session routing. Description of bits: notused0(0) gateway(1) centralDirectoryServer(2) hpr(3) rtp(4) isr(5) borderNode(6)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

appnLocTg 1.3.6.1.4.1.562.2.4.1.110.10
OBJECT IDENTIFIER    

appnLocTgRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.10.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of appnLocTg components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnLocTgRowStatusEntry

appnLocTgRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.10.1.1
A single entry in the table represents a single appnLocTg component.
OBJECT-TYPE    
  AppnLocTgRowStatusEntry  

appnLocTgRowStatus 1.3.6.1.4.1.562.2.4.1.110.10.1.1.1
This variable is used as the basis for SNMP naming of appnLocTg components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

appnLocTgComponentName 1.3.6.1.4.1.562.2.4.1.110.10.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnLocTgStorageType 1.3.6.1.4.1.562.2.4.1.110.10.1.1.4
This variable represents the storage type value for the appnLocTg tables.
OBJECT-TYPE    
  StorageType  

appnLocTgDestFqcpNameIndex 1.3.6.1.4.1.562.2.4.1.110.10.1.1.10
This variable represents an index for the appnLocTg tables.
OBJECT-TYPE    
  AsciiStringIndex SIZE(3..17)  

appnLocTgTransmissionGroupIndex 1.3.6.1.4.1.562.2.4.1.110.10.1.1.11
This variable represents an index for the appnLocTg tables.
OBJECT-TYPE    
  Integer32 0..255  

appnLocTgOperTable 1.3.6.1.4.1.562.2.4.1.110.10.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Gives the operational status of the local node transmission group.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnLocTgOperEntry

appnLocTgOperEntry 1.3.6.1.4.1.562.2.4.1.110.10.10.1
An entry in the appnLocTgOperTable.
OBJECT-TYPE    
  AppnLocTgOperEntry  

appnLocTgStatus 1.3.6.1.4.1.562.2.4.1.110.10.10.1.1
Status of the transmission group can be one of operational, CpCpSession or quiescing. Description of bits: notused0(0) notused1(1) notused2(2) notused3(3) cpCpSession(4) quiescing(5) notused6(6) operational(7)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

appnLocTgResourceSequenceNumber 1.3.6.1.4.1.562.2.4.1.110.10.10.1.2
This attribute contains the resource sequence number.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

appnLocTgLinkAddressTable 1.3.6.1.4.1.562.2.4.1.110.10.11
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Contains the attribute for destination address.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnLocTgLinkAddressEntry

appnLocTgLinkAddressEntry 1.3.6.1.4.1.562.2.4.1.110.10.11.1
An entry in the appnLocTgLinkAddressTable.
OBJECT-TYPE    
  AppnLocTgLinkAddressEntry  

appnLocTgDlcData 1.3.6.1.4.1.562.2.4.1.110.10.11.1.1
This attribute contains specific data related to the link connection. Token-Ring - contains MAC/SAP X.25 Switched - contains dial digits X.21 Switched - contains dial digits Circuit Switched - contains dial digits Frame-Relay - contains DLCI and SAP The value will be set to zero if the destination node type is not a virtual routing node.
OBJECT-TYPE    
  HexString SIZE(0..32)  

appnLocTgTgCharTable 1.3.6.1.4.1.562.2.4.1.110.10.12
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** These attributes of the link station are in a group using a common structure. This set provides the TG characteristics of the link through this link station for route selection.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnLocTgTgCharEntry

appnLocTgTgCharEntry 1.3.6.1.4.1.562.2.4.1.110.10.12.1
An entry in the appnLocTgTgCharTable.
OBJECT-TYPE    
  AppnLocTgTgCharEntry  

appnLocTgEffectiveCap 1.3.6.1.4.1.562.2.4.1.110.10.12.1.1
The effective capacity is an integer value that indicates the capacity in kilo bits per second. It is derived from the link bandwidth and the maximum load factor with the range of 0 thru 603,979,776.
OBJECT-TYPE    
  INTEGER min(0), n170bps(1), n190bps(2), n210bps(3), n230bps(4), n240bps(5), n260bps(6), n280bps(7), n300bps(8), n340bps(9), n380bps(10), n410bps(11), n450bps(12), n490bps(13), n530bps(14), n560bps(15), n600bps(16), n680bps(17), n750bps(18), n830bps(19), n900bps(20), n980bps(21), n1050bps(22), n1130bps(23), n1200bps(24), n1350bps(25), n1500bps(26), n1700bps(27), n1800bps(28), n2000bps(29), n2100bps(30), n2300bps(31), n2400bps(32), n2700bps(33), n3000bps(34), n3300bps(35), n3600bps(36), n3900bps(37), n4200bps(38), n4500bps(39), n4800bps(40), n5400bps(41), n6000bps(42), n6600bps(43), n7200bps(44), n7800bps(45), n8400bps(46), n9000bps(47), n9600bps(48), n10800bps(49), n12000bps(50), n13200bps(51), n14400bps(52), n15600bps(53), n17kbps(54), n18kbps(55), n19kbps(56), n22kbps(57), n24kbps(58), n26kbps(59), n29kbps(60), n31kbps(61), n34kbps(62), n36kbps(63), n38kbps(64), n43kbps(65), n48kbps(66), n53kbps(67), n58kbps(68), n62kbps(69), n67kbps(70), n72kbps(71), n77kbps(72), n86kbps(73), n96kbps(74), n106kbps(75), n115kbps(76), n125kbps(77), n134kbps(78), n144kbps(79), n154kbps(80), n170kbps(81), n190kbps(82), n210kbps(83), n230kbps(84), n250kbps(85), n270kbps(86), n290kbps(87), n310kbps(88), n350kbps(89), n380kbps(90), n420kbps(91), n460kbps(92), n500kbps(93), n540kbps(94), n580kbps(95), n610kbps(96), n690kbps(97), n770kbps(98), n840kbps(99), n920kbps(100), n1000kbps(101), n1080kbps(102), n1150kbps(103), n1230kbps(104), n1380kbps(105), n1540kbps(106), n1700kbps(107), n1800kbps(108), n2000kbps(109), n2200kbps(110), n2300kbps(111), n2500kbps(112), n2800kbps(113), n3100kbps(114), n3400kbps(115), n3700kbps(116), n4000kbps(117), n4300kbps(118), n4600kbps(119), n4900kbps(120), n5500kbps(121), n6100kbps(122), n6800kbps(123), n7400kbps(124), n8000kbps(125), n8600kbps(126), n9200kbps(127), n9800kbps(128), n11100kbps(129), n12300kbps(130), n13500kbps(131), n14700kbps(132), n16Mbps(133), n17Mbps(134), n18Mbps(135), n20Mbps(136), n22Mbps(137), n25Mbps(138), n27Mbps(139), n29Mbps(140), n32Mbps(141), n34Mbps(142), n37Mbps(143), n39Mbps(144), n44Mbps(145), n49Mbps(146), n54Mbps(147), n59Mbps(148), n64Mbps(149), n69Mbps(150), n74Mbps(151), n79Mbps(152), n88Mbps(153), n98Mbps(154), n108Mbps(155), n118Mbps(156), n128Mbps(157), n138Mbps(158), n147Mbps(159), n157Mbps(160), n180Mbps(161), n200Mbps(162), n220Mbps(163), n240Mbps(164), n260Mbps(165), n280Mbps(166), n290Mbps(167), n310Mbps(168), n350Mbps(169), n390Mbps(170), n430Mbps(171), n470Mbps(172), n510Mbps(173), n550Mbps(174), n590Mbps(175), n630Mbps(176), n710Mbps(177), n790Mbps(178), n870Mbps(179), n940Mbps(180), n1020Mbps(181), n1100Mbps(182), n1180Mbps(183), n1260Mbps(184), n1420Mbps(185), n1570Mbps(186), n1700Mbps(187), n1900Mbps(188), n2000Mbps(189), n2200Mbps(190), n2400Mbps(191), n2500Mbps(192), n2800Mbps(193), n3100Mbps(194), n3500Mbps(195), n3800Mbps(196), n4100Mbps(197), n4400Mbps(198), n4700Mbps(199), n5000Mbps(200), n5700Mbps(201), n6300Mbps(202), n6900Mbps(203), n7500Mbps(204), n8200Mbps(205), n8800Mbps(206), n9400Mbps(207), n10100Mbps(208), n11300Mbps(209), n12600Mbps(210), n13800Mbps(211), n15100Mbps(212), n16Gbps(213), n18Gbps(214), n19Gbps(215), n20Gbps(216), n23Gbps(217), n25Gbps(218), n28Gbps(219), n30Gbps(220), n33Gbps(221), n35Gbps(222), n38Gbps(223), n40Gbps(224), n45Gbps(225), n50Gbps(226), n55Gbps(227), n60Gbps(228), n65Gbps(229), n70Gbps(230), n75Gbps(231), n81Gbps(232), n91Gbps(233), n101Gbps(234), n111Gbps(235), n121Gbps(236), n131Gbps(237), n141Gbps(238), n151Gbps(239), n160Gbps(240), n180Gbps(241), n200Gbps(242), n220Gbps(243), n240Gbps(244), n260Gbps(245), n280Gbps(246), n300Gbps(247), n320Gbps(248), n360Gbps(249), n400Gbps(250), n440Gbps(251), n480Gbps(252), n520Gbps(253), n560Gbps(254), n600Gbps(255)  

appnLocTgConnectCost 1.3.6.1.4.1.562.2.4.1.110.10.12.1.2
The cost-per-connect time is a characteristic represented by a single-byte value in the range 0 to 255 that expresses a relative cost of using a transmission group. The units for cost-per-connect time are installation-defined and are typically based on the applicable tariffs of the transmission facility being used by the transmission group. The cost-per-connect time values that a network administrator assigns to the transmission groups in a network should reflect the relative expense of each transmission group as compared to all other transmission groups in the network. A value of 0 means that the cost of connecting over the transmission group is at no additional cost (as in the case of a non-switched facility.
OBJECT-TYPE    
  INTEGER 0..255  

appnLocTgByteCost 1.3.6.1.4.1.562.2.4.1.110.10.12.1.3
Cost-per-byte is a single byte value in the range 0 to 255 that expresses a relative cost of transmitting a byte over the associated transmission group. The units for cost-per-byte are user-defined. Like cost-per-connect-time, cost-per-byte is network specific and will not be uniform across networks unless assignments are coordinated.
OBJECT-TYPE    
  INTEGER 0..255  

appnLocTgSecurity 1.3.6.1.4.1.562.2.4.1.110.10.12.1.4
This static characteristic indicates the level of security protection. The security values are architecturally defined to provide continuity across all networks. Currently, security is encoded as one of the following seven values: guardedRadiation - guarded conduit containing the transmission medium; protected against physical and radiation tapping. encrypted - link level encryption is provided unknown - has not been determined guardedConduit - guarded conduit; protected against physical tapping secureConduit - secure conduit, not guarded; e.g. pressurized pipe undergroundCable - underground cable located in a secure country publicSwitchedNetwork - public switched network; secure in the sense that there is no predetermined route that traffic will take nonSecure - all else, e.g. satellite-connected, located in a nonsecure country.
OBJECT-TYPE    
  INTEGER unKnown(0), nonSecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192)  

appnLocTgPropagationDelay 1.3.6.1.4.1.562.2.4.1.110.10.12.1.5
The propagation delay is the length of time that it takes for a signal to propagate from one end of the transmission group to the other. Typical values are: minimum - minimum negligible - 400 microsec terrestrial - 10 msec packetSwitched - 150 msec long - 300 msec
OBJECT-TYPE    
  INTEGER minimum(0), negligible(76), terrestrial(113), packetSwitched(145), long(153)  

appnLocTgUserDefinedParm1 1.3.6.1.4.1.562.2.4.1.110.10.12.1.7
This is the user defined routing parameter in range 0-255.
OBJECT-TYPE    
  Unsigned32 0..255  

appnLocTgUserDefinedParm2 1.3.6.1.4.1.562.2.4.1.110.10.12.1.8
This is the user defined routing parameter in range 0-255.
OBJECT-TYPE    
  Unsigned32 0..255  

appnLocTgUserDefinedParm3 1.3.6.1.4.1.562.2.4.1.110.10.12.1.9
This is the user defined routing parameter in range 0-255.
OBJECT-TYPE    
  Unsigned32 0..255  

appnIsrSess 1.3.6.1.4.1.562.2.4.1.110.11
OBJECT IDENTIFIER    

appnIsrSessRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.11.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of appnIsrSess components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnIsrSessRowStatusEntry

appnIsrSessRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.11.1.1
A single entry in the table represents a single appnIsrSess component.
OBJECT-TYPE    
  AppnIsrSessRowStatusEntry  

appnIsrSessRowStatus 1.3.6.1.4.1.562.2.4.1.110.11.1.1.1
This variable is used as the basis for SNMP naming of appnIsrSess components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

appnIsrSessComponentName 1.3.6.1.4.1.562.2.4.1.110.11.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnIsrSessStorageType 1.3.6.1.4.1.562.2.4.1.110.11.1.1.4
This variable represents the storage type value for the appnIsrSess tables.
OBJECT-TYPE    
  StorageType  

appnIsrSessFqcpNameIndex 1.3.6.1.4.1.562.2.4.1.110.11.1.1.10
This variable represents an index for the appnIsrSess tables.
OBJECT-TYPE    
  AsciiStringIndex SIZE(3..17)  

appnIsrSessProcedureCorrelationIdIndex 1.3.6.1.4.1.562.2.4.1.110.11.1.1.11
This variable represents an index for the appnIsrSess tables.
OBJECT-TYPE    
  HexString SIZE(8)  

appnIsrSessOperTable 1.3.6.1.4.1.562.2.4.1.110.11.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This component contains dynamic information about an intermediate session for which the network node is providing transit routing.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnIsrSessOperEntry

appnIsrSessOperEntry 1.3.6.1.4.1.562.2.4.1.110.11.10.1
An entry in the appnIsrSessOperTable.
OBJECT-TYPE    
  AppnIsrSessOperEntry  

appnIsrSessTransmissionPriority 1.3.6.1.4.1.562.2.4.1.110.11.10.1.1
This attribute contains the transmission priority. This is one of low, medium, high or network.
OBJECT-TYPE    
  INTEGER low(1), medium(2), high(3), network(4)  

appnIsrSessCosName 1.3.6.1.4.1.562.2.4.1.110.11.10.1.2
This is the class of service used to select the route. Class of service (COS) is a designation of the transport network characteristics, such as route security, transmission priority, and bandwidth, needed for a particular session. The class of service is derived from the mode name specified by the initiator of the session.
OBJECT-TYPE    
  AsciiString SIZE(1..8)  

appnIsrSessLimitedResource 1.3.6.1.4.1.562.2.4.1.110.11.10.1.3
This attribute specifies whether the session uses a limited resource link. A limited resource link remains active only when being used and is deactivated when session traffic ceases.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

appnIsrSessPriStats 1.3.6.1.4.1.562.2.4.1.110.11.100
OBJECT IDENTIFIER    

appnIsrSessPriStatsRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.11.100.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of appnIsrSessPriStats components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnIsrSessPriStatsRowStatusEntry

appnIsrSessPriStatsRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.11.100.1.1
A single entry in the table represents a single appnIsrSessPriStats component.
OBJECT-TYPE    
  AppnIsrSessPriStatsRowStatusEntry  

appnIsrSessPriStatsRowStatus 1.3.6.1.4.1.562.2.4.1.110.11.100.1.1.1
This variable is used as the basis for SNMP naming of appnIsrSessPriStats components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

appnIsrSessPriStatsComponentName 1.3.6.1.4.1.562.2.4.1.110.11.100.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnIsrSessPriStatsStorageType 1.3.6.1.4.1.562.2.4.1.110.11.100.1.1.4
This variable represents the storage type value for the appnIsrSessPriStats tables.
OBJECT-TYPE    
  StorageType  

appnIsrSessPriStatsIndex 1.3.6.1.4.1.562.2.4.1.110.11.100.1.1.10
This variable represents the index for the appnIsrSessPriStats tables.
OBJECT-TYPE    
  NonReplicated  

appnIsrSessPriStatsStatsTable 1.3.6.1.4.1.562.2.4.1.110.11.100.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This component contains counters and statistics for a session.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnIsrSessPriStatsStatsEntry

appnIsrSessPriStatsStatsEntry 1.3.6.1.4.1.562.2.4.1.110.11.100.10.1
An entry in the appnIsrSessPriStatsStatsTable.
OBJECT-TYPE    
  AppnIsrSessPriStatsStatsEntry  

appnIsrSessPriStatsRxRuSize 1.3.6.1.4.1.562.2.4.1.110.11.100.10.1.1
This is the maximum request unit (RU) size that can be used on the session.
OBJECT-TYPE    
  Unsigned32 0..65535  

appnIsrSessPriStatsMaxTxBtuSize 1.3.6.1.4.1.562.2.4.1.110.11.100.10.1.2
This is the maximum BTU size (length of the information field in a frame) that can be sent on the session.
OBJECT-TYPE    
  Unsigned32 0..65535  

appnIsrSessPriStatsMaxRxBtuSize 1.3.6.1.4.1.562.2.4.1.110.11.100.10.1.3
This is the maximum BTU size (length of the information field in a frame) that can be received on the session.
OBJECT-TYPE    
  Unsigned32 0..65535  

appnIsrSessPriStatsMaxTxPacWin 1.3.6.1.4.1.562.2.4.1.110.11.100.10.1.4
This is the maximum size of the send pacing window on the session.
OBJECT-TYPE    
  INTEGER 0..32767  

appnIsrSessPriStatsCurTxPacWin 1.3.6.1.4.1.562.2.4.1.110.11.100.10.1.5
This is the current size of the send pacing window on the session.
OBJECT-TYPE    
  INTEGER 0..32767  

appnIsrSessPriStatsMaxRxPacWin 1.3.6.1.4.1.562.2.4.1.110.11.100.10.1.6
This is the maximum size of the receive pacing window on the session.
OBJECT-TYPE    
  INTEGER 0..32767  

appnIsrSessPriStatsCurRxPacWin 1.3.6.1.4.1.562.2.4.1.110.11.100.10.1.7
This is the current size of the receive pacing window on the session.
OBJECT-TYPE    
  INTEGER 0..32767  

appnIsrSessPriStatsTxDataframes 1.3.6.1.4.1.562.2.4.1.110.11.100.10.1.8
This attribute counts the number of normal flow data frames sent on the session, the counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnIsrSessPriStatsTxFmdFrames 1.3.6.1.4.1.562.2.4.1.110.11.100.10.1.9
This attribute counts the number of FMD data frames sent on the session, the counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnIsrSessPriStatsTxDataBytes 1.3.6.1.4.1.562.2.4.1.110.11.100.10.1.10
This is the number of normal flow data bytes sent on the session, the counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnIsrSessPriStatsRxDataFrames 1.3.6.1.4.1.562.2.4.1.110.11.100.10.1.11
This is the number of normal flow data frames received on the session, the counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnIsrSessPriStatsRxFmdFrames 1.3.6.1.4.1.562.2.4.1.110.11.100.10.1.12
This attribute counts the number of FMD data frames received on the session, the counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnIsrSessPriStatsRxDataBytes 1.3.6.1.4.1.562.2.4.1.110.11.100.10.1.13
This is the number of normal flow data bytes received on the session, the counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnIsrSessPriStatsSidh 1.3.6.1.4.1.562.2.4.1.110.11.100.10.1.14
This attribute contains the session identifier high byte on the session.
OBJECT-TYPE    
  Hex 0..255  

appnIsrSessPriStatsSidl 1.3.6.1.4.1.562.2.4.1.110.11.100.10.1.15
This attribute contains the session ID low byte on the SSCP session.
OBJECT-TYPE    
  Hex 0..255  

appnIsrSessPriStatsOdai 1.3.6.1.4.1.562.2.4.1.110.11.100.10.1.16
This is the origin destination assignor indicator (ODAI) on the session.
OBJECT-TYPE    
  INTEGER primary(0), secondary(1)  

appnIsrSessPriStatsLsName 1.3.6.1.4.1.562.2.4.1.110.11.100.10.1.17
This is the link station name associated with these counters and statistics. This is an 8 character name of the link station over which the data flowed. This field can be used to correlate the session statistics with the link over which session data flows.
OBJECT-TYPE    
  AsciiString SIZE(1..8)  

appnIsrSessSecStats 1.3.6.1.4.1.562.2.4.1.110.11.101
OBJECT IDENTIFIER    

appnIsrSessSecStatsRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.11.101.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of appnIsrSessSecStats components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnIsrSessSecStatsRowStatusEntry

appnIsrSessSecStatsRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.11.101.1.1
A single entry in the table represents a single appnIsrSessSecStats component.
OBJECT-TYPE    
  AppnIsrSessSecStatsRowStatusEntry  

appnIsrSessSecStatsRowStatus 1.3.6.1.4.1.562.2.4.1.110.11.101.1.1.1
This variable is used as the basis for SNMP naming of appnIsrSessSecStats components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

appnIsrSessSecStatsComponentName 1.3.6.1.4.1.562.2.4.1.110.11.101.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnIsrSessSecStatsStorageType 1.3.6.1.4.1.562.2.4.1.110.11.101.1.1.4
This variable represents the storage type value for the appnIsrSessSecStats tables.
OBJECT-TYPE    
  StorageType  

appnIsrSessSecStatsIndex 1.3.6.1.4.1.562.2.4.1.110.11.101.1.1.10
This variable represents the index for the appnIsrSessSecStats tables.
OBJECT-TYPE    
  NonReplicated  

appnIsrSessSecStatsStatsTable 1.3.6.1.4.1.562.2.4.1.110.11.101.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This component contains counters and statistics for a session.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnIsrSessSecStatsStatsEntry

appnIsrSessSecStatsStatsEntry 1.3.6.1.4.1.562.2.4.1.110.11.101.10.1
An entry in the appnIsrSessSecStatsStatsTable.
OBJECT-TYPE    
  AppnIsrSessSecStatsStatsEntry  

appnIsrSessSecStatsRxRuSize 1.3.6.1.4.1.562.2.4.1.110.11.101.10.1.1
This is the maximum request unit (RU) size that can be used on the session.
OBJECT-TYPE    
  Unsigned32 0..65535  

appnIsrSessSecStatsMaxTxBtuSize 1.3.6.1.4.1.562.2.4.1.110.11.101.10.1.2
This is the maximum BTU size (length of the information field in a frame) that can be sent on the session.
OBJECT-TYPE    
  Unsigned32 0..65535  

appnIsrSessSecStatsMaxRxBtuSize 1.3.6.1.4.1.562.2.4.1.110.11.101.10.1.3
This is the maximum BTU size (length of the information field in a frame) that can be received on the session.
OBJECT-TYPE    
  Unsigned32 0..65535  

appnIsrSessSecStatsMaxTxPacWin 1.3.6.1.4.1.562.2.4.1.110.11.101.10.1.4
This is the maximum size of the send pacing window on the session.
OBJECT-TYPE    
  INTEGER 0..32767  

appnIsrSessSecStatsCurTxPacWin 1.3.6.1.4.1.562.2.4.1.110.11.101.10.1.5
This is the current size of the send pacing window on the session.
OBJECT-TYPE    
  INTEGER 0..32767  

appnIsrSessSecStatsMaxRxPacWin 1.3.6.1.4.1.562.2.4.1.110.11.101.10.1.6
This is the maximum size of the receive pacing window on the session.
OBJECT-TYPE    
  INTEGER 0..32767  

appnIsrSessSecStatsCurRxPacWin 1.3.6.1.4.1.562.2.4.1.110.11.101.10.1.7
This is the current size of the receive pacing window on the session.
OBJECT-TYPE    
  INTEGER 0..32767  

appnIsrSessSecStatsTxDataframes 1.3.6.1.4.1.562.2.4.1.110.11.101.10.1.8
This attribute counts the number of normal flow data frames sent on the session, the counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnIsrSessSecStatsTxFmdFrames 1.3.6.1.4.1.562.2.4.1.110.11.101.10.1.9
This attribute counts the number of FMD data frames sent on the session, the counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnIsrSessSecStatsTxDataBytes 1.3.6.1.4.1.562.2.4.1.110.11.101.10.1.10
This is the number of normal flow data bytes sent on the session, the counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnIsrSessSecStatsRxDataFrames 1.3.6.1.4.1.562.2.4.1.110.11.101.10.1.11
This is the number of normal flow data frames received on the session, the counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnIsrSessSecStatsRxFmdFrames 1.3.6.1.4.1.562.2.4.1.110.11.101.10.1.12
This attribute counts the number of FMD data frames received on the session, the counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnIsrSessSecStatsRxDataBytes 1.3.6.1.4.1.562.2.4.1.110.11.101.10.1.13
This is the number of normal flow data bytes received on the session, the counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnIsrSessSecStatsSidh 1.3.6.1.4.1.562.2.4.1.110.11.101.10.1.14
This attribute contains the session identifier high byte on the session.
OBJECT-TYPE    
  Hex 0..255  

appnIsrSessSecStatsSidl 1.3.6.1.4.1.562.2.4.1.110.11.101.10.1.15
This attribute contains the session ID low byte on the SSCP session.
OBJECT-TYPE    
  Hex 0..255  

appnIsrSessSecStatsOdai 1.3.6.1.4.1.562.2.4.1.110.11.101.10.1.16
This is the origin destination assignor indicator (ODAI) on the session.
OBJECT-TYPE    
  INTEGER primary(0), secondary(1)  

appnIsrSessSecStatsLsName 1.3.6.1.4.1.562.2.4.1.110.11.101.10.1.17
This is the link station name associated with these counters and statistics. This is an 8 character name of the link station over which the data flowed. This field can be used to correlate the session statistics with the link over which session data flows.
OBJECT-TYPE    
  AsciiString SIZE(1..8)  

appnNnTg 1.3.6.1.4.1.562.2.4.1.110.12
OBJECT IDENTIFIER    

appnNnTgRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.12.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of appnNnTg components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnNnTgRowStatusEntry

appnNnTgRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.12.1.1
A single entry in the table represents a single appnNnTg component.
OBJECT-TYPE    
  AppnNnTgRowStatusEntry  

appnNnTgRowStatus 1.3.6.1.4.1.562.2.4.1.110.12.1.1.1
This variable is used as the basis for SNMP naming of appnNnTg components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

appnNnTgComponentName 1.3.6.1.4.1.562.2.4.1.110.12.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnNnTgStorageType 1.3.6.1.4.1.562.2.4.1.110.12.1.1.4
This variable represents the storage type value for the appnNnTg tables.
OBJECT-TYPE    
  StorageType  

appnNnTgOwnerFqcpNameIndex 1.3.6.1.4.1.562.2.4.1.110.12.1.1.10
This variable represents an index for the appnNnTg tables.
OBJECT-TYPE    
  AsciiStringIndex SIZE(3..17)  

appnNnTgDestFqcpNameIndex 1.3.6.1.4.1.562.2.4.1.110.12.1.1.11
This variable represents an index for the appnNnTg tables.
OBJECT-TYPE    
  AsciiStringIndex SIZE(3..17)  

appnNnTgTransmissionGroupIndex 1.3.6.1.4.1.562.2.4.1.110.12.1.1.12
This variable represents an index for the appnNnTg tables.
OBJECT-TYPE    
  Integer32 0..255  

appnNnTgOperTable 1.3.6.1.4.1.562.2.4.1.110.12.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational status of the transmission group entry in the topology database.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnNnTgOperEntry

appnNnTgOperEntry 1.3.6.1.4.1.562.2.4.1.110.12.10.1
An entry in the appnNnTgOperTable.
OBJECT-TYPE    
  AppnNnTgOperEntry  

appnNnTgFlowReductionSequenceNumber 1.3.6.1.4.1.562.2.4.1.110.12.10.1.1
Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last time this resource was updated at this node. SNMP APPN MIB = ibmappnNnTgFrsn
OBJECT-TYPE    
  Unsigned32 0..4294967295  

appnNnTgDaysLeft 1.3.6.1.4.1.562.2.4.1.110.12.10.1.2
Number of days left until entry purged.
OBJECT-TYPE    
  Unsigned32 1..15  

appnNnTgResourceSequenceNumber 1.3.6.1.4.1.562.2.4.1.110.12.10.1.3
Resource sequence number.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

appnNnTgStatus 1.3.6.1.4.1.562.2.4.1.110.12.10.1.4
This attribute contains status information about the transmission group from the topology database. It can be any combination of the following: operational If present indicates that the transmission group is operational. CpCpSessions If present, indicates that CP-CP sessions are supported on this transmission group. quiescing If present, indicates that the transmission group is quiescing. Description of bits: notused0(0) notused1(1) notused2(2) notused3(3) cpCpSessions(4) quiescing(5) notused6(6) operational(7)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

appnNnTgLinkAddressTable 1.3.6.1.4.1.562.2.4.1.110.12.11
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Contains the attribute for destination address.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnNnTgLinkAddressEntry

appnNnTgLinkAddressEntry 1.3.6.1.4.1.562.2.4.1.110.12.11.1
An entry in the appnNnTgLinkAddressTable.
OBJECT-TYPE    
  AppnNnTgLinkAddressEntry  

appnNnTgDlcData 1.3.6.1.4.1.562.2.4.1.110.12.11.1.1
This attribute contains specific data related to the link connection. Token-Ring - contains MAC/SAP X.25 Switched - contains dial digits X.21 Switched - contains dial digits Circuit Switched - contains dial digits Frame-Relay - contains DLCI and SAP The value will be set to zero if the destination node type is not a virtual routing node.
OBJECT-TYPE    
  HexString SIZE(0..32)  

appnNnTgTgCharTable 1.3.6.1.4.1.562.2.4.1.110.12.12
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** These attributes of the link station are in a group using a common structure. This set provides the TG characteristics of the link through this link station for route selection.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnNnTgTgCharEntry

appnNnTgTgCharEntry 1.3.6.1.4.1.562.2.4.1.110.12.12.1
An entry in the appnNnTgTgCharTable.
OBJECT-TYPE    
  AppnNnTgTgCharEntry  

appnNnTgEffectiveCap 1.3.6.1.4.1.562.2.4.1.110.12.12.1.1
The effective capacity is an integer value that indicates the capacity in kilo bits per second. It is derived from the link bandwidth and the maximum load factor with the range of 0 thru 603,979,776.
OBJECT-TYPE    
  INTEGER min(0), n170bps(1), n190bps(2), n210bps(3), n230bps(4), n240bps(5), n260bps(6), n280bps(7), n300bps(8), n340bps(9), n380bps(10), n410bps(11), n450bps(12), n490bps(13), n530bps(14), n560bps(15), n600bps(16), n680bps(17), n750bps(18), n830bps(19), n900bps(20), n980bps(21), n1050bps(22), n1130bps(23), n1200bps(24), n1350bps(25), n1500bps(26), n1700bps(27), n1800bps(28), n2000bps(29), n2100bps(30), n2300bps(31), n2400bps(32), n2700bps(33), n3000bps(34), n3300bps(35), n3600bps(36), n3900bps(37), n4200bps(38), n4500bps(39), n4800bps(40), n5400bps(41), n6000bps(42), n6600bps(43), n7200bps(44), n7800bps(45), n8400bps(46), n9000bps(47), n9600bps(48), n10800bps(49), n12000bps(50), n13200bps(51), n14400bps(52), n15600bps(53), n17kbps(54), n18kbps(55), n19kbps(56), n22kbps(57), n24kbps(58), n26kbps(59), n29kbps(60), n31kbps(61), n34kbps(62), n36kbps(63), n38kbps(64), n43kbps(65), n48kbps(66), n53kbps(67), n58kbps(68), n62kbps(69), n67kbps(70), n72kbps(71), n77kbps(72), n86kbps(73), n96kbps(74), n106kbps(75), n115kbps(76), n125kbps(77), n134kbps(78), n144kbps(79), n154kbps(80), n170kbps(81), n190kbps(82), n210kbps(83), n230kbps(84), n250kbps(85), n270kbps(86), n290kbps(87), n310kbps(88), n350kbps(89), n380kbps(90), n420kbps(91), n460kbps(92), n500kbps(93), n540kbps(94), n580kbps(95), n610kbps(96), n690kbps(97), n770kbps(98), n840kbps(99), n920kbps(100), n1000kbps(101), n1080kbps(102), n1150kbps(103), n1230kbps(104), n1380kbps(105), n1540kbps(106), n1700kbps(107), n1800kbps(108), n2000kbps(109), n2200kbps(110), n2300kbps(111), n2500kbps(112), n2800kbps(113), n3100kbps(114), n3400kbps(115), n3700kbps(116), n4000kbps(117), n4300kbps(118), n4600kbps(119), n4900kbps(120), n5500kbps(121), n6100kbps(122), n6800kbps(123), n7400kbps(124), n8000kbps(125), n8600kbps(126), n9200kbps(127), n9800kbps(128), n11100kbps(129), n12300kbps(130), n13500kbps(131), n14700kbps(132), n16Mbps(133), n17Mbps(134), n18Mbps(135), n20Mbps(136), n22Mbps(137), n25Mbps(138), n27Mbps(139), n29Mbps(140), n32Mbps(141), n34Mbps(142), n37Mbps(143), n39Mbps(144), n44Mbps(145), n49Mbps(146), n54Mbps(147), n59Mbps(148), n64Mbps(149), n69Mbps(150), n74Mbps(151), n79Mbps(152), n88Mbps(153), n98Mbps(154), n108Mbps(155), n118Mbps(156), n128Mbps(157), n138Mbps(158), n147Mbps(159), n157Mbps(160), n180Mbps(161), n200Mbps(162), n220Mbps(163), n240Mbps(164), n260Mbps(165), n280Mbps(166), n290Mbps(167), n310Mbps(168), n350Mbps(169), n390Mbps(170), n430Mbps(171), n470Mbps(172), n510Mbps(173), n550Mbps(174), n590Mbps(175), n630Mbps(176), n710Mbps(177), n790Mbps(178), n870Mbps(179), n940Mbps(180), n1020Mbps(181), n1100Mbps(182), n1180Mbps(183), n1260Mbps(184), n1420Mbps(185), n1570Mbps(186), n1700Mbps(187), n1900Mbps(188), n2000Mbps(189), n2200Mbps(190), n2400Mbps(191), n2500Mbps(192), n2800Mbps(193), n3100Mbps(194), n3500Mbps(195), n3800Mbps(196), n4100Mbps(197), n4400Mbps(198), n4700Mbps(199), n5000Mbps(200), n5700Mbps(201), n6300Mbps(202), n6900Mbps(203), n7500Mbps(204), n8200Mbps(205), n8800Mbps(206), n9400Mbps(207), n10100Mbps(208), n11300Mbps(209), n12600Mbps(210), n13800Mbps(211), n15100Mbps(212), n16Gbps(213), n18Gbps(214), n19Gbps(215), n20Gbps(216), n23Gbps(217), n25Gbps(218), n28Gbps(219), n30Gbps(220), n33Gbps(221), n35Gbps(222), n38Gbps(223), n40Gbps(224), n45Gbps(225), n50Gbps(226), n55Gbps(227), n60Gbps(228), n65Gbps(229), n70Gbps(230), n75Gbps(231), n81Gbps(232), n91Gbps(233), n101Gbps(234), n111Gbps(235), n121Gbps(236), n131Gbps(237), n141Gbps(238), n151Gbps(239), n160Gbps(240), n180Gbps(241), n200Gbps(242), n220Gbps(243), n240Gbps(244), n260Gbps(245), n280Gbps(246), n300Gbps(247), n320Gbps(248), n360Gbps(249), n400Gbps(250), n440Gbps(251), n480Gbps(252), n520Gbps(253), n560Gbps(254), n600Gbps(255)  

appnNnTgConnectCost 1.3.6.1.4.1.562.2.4.1.110.12.12.1.2
The cost-per-connect time is a characteristic represented by a single-byte value in the range 0 to 255 that expresses a relative cost of using a transmission group. The units for cost-per-connect time are installation-defined and are typically based on the applicable tariffs of the transmission facility being used by the transmission group. The cost-per-connect time values that a network administrator assigns to the transmission groups in a network should reflect the relative expense of each transmission group as compared to all other transmission groups in the network. A value of 0 means that the cost of connecting over the transmission group is at no additional cost (as in the case of a non-switched facility.
OBJECT-TYPE    
  INTEGER 0..255  

appnNnTgByteCost 1.3.6.1.4.1.562.2.4.1.110.12.12.1.3
Cost-per-byte is a single byte value in the range 0 to 255 that expresses a relative cost of transmitting a byte over the associated transmission group. The units for cost-per-byte are user-defined. Like cost-per-connect-time, cost-per-byte is network specific and will not be uniform across networks unless assignments are coordinated.
OBJECT-TYPE    
  INTEGER 0..255  

appnNnTgSecurity 1.3.6.1.4.1.562.2.4.1.110.12.12.1.4
This static characteristic indicates the level of security protection. The security values are architecturally defined to provide continuity across all networks. Currently, security is encoded as one of the following seven values: guardedRadiation - guarded conduit containing the transmission medium; protected against physical and radiation tapping. encrypted - link level encryption is provided unknown - has not been determined guardedConduit - guarded conduit; protected against physical tapping secureConduit - secure conduit, not guarded; e.g. pressurized pipe undergroundCable - underground cable located in a secure country publicSwitchedNetwork - public switched network; secure in the sense that there is no predetermined route that traffic will take nonSecure - all else, e.g. satellite-connected, located in a nonsecure country.
OBJECT-TYPE    
  INTEGER unKnown(0), nonSecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192)  

appnNnTgPropagationDelay 1.3.6.1.4.1.562.2.4.1.110.12.12.1.5
The propagation delay is the length of time that it takes for a signal to propagate from one end of the transmission group to the other. Typical values are: minimum - minimum negligible - 400 microsec terrestrial - 10 msec packetSwitched - 150 msec long - 300 msec
OBJECT-TYPE    
  INTEGER minimum(0), negligible(76), terrestrial(113), packetSwitched(145), long(153)  

appnNnTgUserDefinedParm1 1.3.6.1.4.1.562.2.4.1.110.12.12.1.7
This is the user defined routing parameter in range 0-255.
OBJECT-TYPE    
  Unsigned32 0..255  

appnNnTgUserDefinedParm2 1.3.6.1.4.1.562.2.4.1.110.12.12.1.8
This is the user defined routing parameter in range 0-255.
OBJECT-TYPE    
  Unsigned32 0..255  

appnNnTgUserDefinedParm3 1.3.6.1.4.1.562.2.4.1.110.12.12.1.9
This is the user defined routing parameter in range 0-255.
OBJECT-TYPE    
  Unsigned32 0..255  

appnRtp 1.3.6.1.4.1.562.2.4.1.110.13
OBJECT IDENTIFIER    

appnRtpRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.13.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of appnRtp components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnRtpRowStatusEntry

appnRtpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.13.1.1
A single entry in the table represents a single appnRtp component.
OBJECT-TYPE    
  AppnRtpRowStatusEntry  

appnRtpRowStatus 1.3.6.1.4.1.562.2.4.1.110.13.1.1.1
This variable is used as the basis for SNMP naming of appnRtp components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

appnRtpComponentName 1.3.6.1.4.1.562.2.4.1.110.13.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnRtpStorageType 1.3.6.1.4.1.562.2.4.1.110.13.1.1.4
This variable represents the storage type value for the appnRtp tables.
OBJECT-TYPE    
  StorageType  

appnRtpIndex 1.3.6.1.4.1.562.2.4.1.110.13.1.1.10
This variable represents the index for the appnRtp tables.
OBJECT-TYPE    
  AsciiStringIndex SIZE(1..8)  

appnRtpOperTable 1.3.6.1.4.1.562.2.4.1.110.13.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational data for the High Performance Routing-Rapid Transport Protocol pipe
OBJECT-TYPE    
  SEQUENCE OF  
    AppnRtpOperEntry

appnRtpOperEntry 1.3.6.1.4.1.562.2.4.1.110.13.10.1
An entry in the appnRtpOperTable.
OBJECT-TYPE    
  AppnRtpOperEntry  

appnRtpLocalLsName 1.3.6.1.4.1.562.2.4.1.110.13.10.1.1
This is the name of the local link station associated with this High Performance Routing-Rapid Transport Protocol pipe
OBJECT-TYPE    
  AsciiString SIZE(1..8)  

appnRtpRemoteCpName 1.3.6.1.4.1.562.2.4.1.110.13.10.1.2
This is the CP name of the node at the other end of the High Performance Routing-Rapid Transport Protocol pipe
OBJECT-TYPE    
  AsciiString SIZE(1..17)  

appnRtpCosName 1.3.6.1.4.1.562.2.4.1.110.13.10.1.3
This is the name of the Class of Service associated with this High Performance Routing-Rapid Transport Protocol pipe
OBJECT-TYPE    
  AsciiString SIZE(1..8)  

appnRtpActiveSessions 1.3.6.1.4.1.562.2.4.1.110.13.10.1.4
The number of active sessions using this High Performance Routing-Rapid Transport Protocol pipe
OBJECT-TYPE    
  INTEGER 0..32767  

appnRtpLocalTcid 1.3.6.1.4.1.562.2.4.1.110.13.10.1.5
The Transport Connection Identifier (TCID) assigned to this HPR RTP pipe by the local node
OBJECT-TYPE    
  HexString SIZE(8)  

appnRtpRemoteTcid 1.3.6.1.4.1.562.2.4.1.110.13.10.1.6
The Transport Connection Identifier (TCID) assigned to this HPR RTP pipe by the remote node.
OBJECT-TYPE    
  HexString SIZE(8)  

appnRtpIdleTimer 1.3.6.1.4.1.562.2.4.1.110.13.10.1.7
The idle timer of this High Performance Routing-Rapid Transport Protocol pipe (in seconds)
OBJECT-TYPE    
  Unsigned32 0..4294967295  

appnRtpMaxBtuSize 1.3.6.1.4.1.562.2.4.1.110.13.10.1.8
The maximum BTU size (the length of the information field in a frame) of the High Performance Routing-Rapid Transport Protocol pipe.
OBJECT-TYPE    
  INTEGER 0..32767  

appnRtpStatsTable 1.3.6.1.4.1.562.2.4.1.110.13.11
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the statistics and counters for the High Performance Routing-Rapid Transport Protocol pipe.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnRtpStatsEntry

appnRtpStatsEntry 1.3.6.1.4.1.562.2.4.1.110.13.11.1
An entry in the appnRtpStatsTable.
OBJECT-TYPE    
  AppnRtpStatsEntry  

appnRtpTxBytes 1.3.6.1.4.1.562.2.4.1.110.13.11.1.1
This attribute is the total number of bytes sent on this High Performance Routing-Rapid Transport Protocol pipe. This counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnRtpRxBytes 1.3.6.1.4.1.562.2.4.1.110.13.11.1.2
This attribute is the total number of bytes received on this High Performance Routing-Rapid Transport Protocol pipe. This counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnRtpBytesResent 1.3.6.1.4.1.562.2.4.1.110.13.11.1.3
This attribute counts the total number of bytes resent on this High Performance Routing-Rapid Transport Protocol pipe. This counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnRtpBytesDiscarded 1.3.6.1.4.1.562.2.4.1.110.13.11.1.4
This attribute counts the total number of bytes discarded on this High Performance Routing-Rapid Transport Protocol pipe. High numbers of discarded bytes may indicate a problem in the APPN network. This counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnRtpPktTx 1.3.6.1.4.1.562.2.4.1.110.13.11.1.5
This attribute counts the total number of packets sent on this High Performance Routing-Rapid Transport Protocol pipe. This counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnRtpPktRx 1.3.6.1.4.1.562.2.4.1.110.13.11.1.6
This attribute counts the total number of packets received on this High Performance Routing-Rapid Transport Protocol pipe. This counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnRtpPktResent 1.3.6.1.4.1.562.2.4.1.110.13.11.1.7
This attribute counts the total number of packets resent on this High Performance Routing-Rapid Transport Protocol pipe. This counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnRtpPktDiscard 1.3.6.1.4.1.562.2.4.1.110.13.11.1.8
This attribute counts the total number of packets discarded on this High Performance Routing-Rapid Transport Protocol pipe. Large numbers of discarded packets may indicate a problem in the APPN network. This counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnRtpLostFrames 1.3.6.1.4.1.562.2.4.1.110.13.11.1.9
This attribute counts the number of lost frames detected on this pipe. Excessive numbers of lost frames may indicate a problem in the APPN network. This counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnRtpCurTxRate 1.3.6.1.4.1.562.2.4.1.110.13.11.1.10
This attribute gives the current send rate on this pipe.
OBJECT-TYPE    
  Gauge32 0..4294967295  

appnRtpMaxTxRate 1.3.6.1.4.1.562.2.4.1.110.13.11.1.11
This attribute give the maximum send rate on this pipe.
OBJECT-TYPE    
  Gauge32 0..4294967295  

appnRtpMinTxRate 1.3.6.1.4.1.562.2.4.1.110.13.11.1.12
This attribute gives the minimum send rate on this pipe.
OBJECT-TYPE    
  Gauge32 0..4294967295  

appnRtpCurRxRate 1.3.6.1.4.1.562.2.4.1.110.13.11.1.13
This attribute gives the current receive rate on this pipe.
OBJECT-TYPE    
  Gauge32 0..4294967295  

appnRtpMaxRxRate 1.3.6.1.4.1.562.2.4.1.110.13.11.1.14
This attribute gives the maximum receive rate on this pipe.
OBJECT-TYPE    
  Gauge32 0..4294967295  

appnRtpMinRxRate 1.3.6.1.4.1.562.2.4.1.110.13.11.1.15
This attribute gives the minimum receive rate on this pipe.
OBJECT-TYPE    
  Gauge32 0..4294967295  

appnRtpBurstSize 1.3.6.1.4.1.562.2.4.1.110.13.11.1.16
This attribute gives the current burst size on this pipe.
OBJECT-TYPE    
  Gauge32 0..4294967295  

appnRtpUptime 1.3.6.1.4.1.562.2.4.1.110.13.11.1.17
This attribute gives the total uptime of this High Performance Routing-Rapid Transport Protocol pipe.
OBJECT-TYPE    
  TimeTicks  

appnRtpSmoothRoundTripTime 1.3.6.1.4.1.562.2.4.1.110.13.11.1.18
This attribute gives the smoothed round-trip time on this pipe.
OBJECT-TYPE    
  Gauge32 0..4294967295  

appnRtpLastRoundTripTime 1.3.6.1.4.1.562.2.4.1.110.13.11.1.19
This attribute gives the last round-trip time on this pipe.
OBJECT-TYPE    
  Gauge32 0..4294967295  

appnRtpShortReqTimer 1.3.6.1.4.1.562.2.4.1.110.13.11.1.20
This attribute gives the short request timer duration on this pipe.
OBJECT-TYPE    
  Gauge32 0..4294967295  

appnRtpShortReqTimeouts 1.3.6.1.4.1.562.2.4.1.110.13.11.1.21
This attribute counts the number of short request timer timeouts on this pipe.
OBJECT-TYPE    
  PassportCounter64  

appnRtpIdleTimeouts 1.3.6.1.4.1.562.2.4.1.110.13.11.1.22
This attribute count the number of idle timer timeouts on this pipe.
OBJECT-TYPE    
  PassportCounter64  

appnRtpRxInvalidSnaFrames 1.3.6.1.4.1.562.2.4.1.110.13.11.1.23
This attribute counts the number of invalid SNA frames received on this pipe.
OBJECT-TYPE    
  PassportCounter64  

appnRtpInSessionControlFrames 1.3.6.1.4.1.562.2.4.1.110.13.11.1.24
This attribute counts the number of Session Control frames received on this pipe.
OBJECT-TYPE    
  PassportCounter64  

appnRtpOutSessionControlFrames 1.3.6.1.4.1.562.2.4.1.110.13.11.1.25
This attribute counts the number of Session Control frames sent on this pipe.
OBJECT-TYPE    
  PassportCounter64  

appnDlu 1.3.6.1.4.1.562.2.4.1.110.14
OBJECT IDENTIFIER    

appnDluRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.14.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of appnDlu components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDluRowStatusEntry

appnDluRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.14.1.1
A single entry in the table represents a single appnDlu component.
OBJECT-TYPE    
  AppnDluRowStatusEntry  

appnDluRowStatus 1.3.6.1.4.1.562.2.4.1.110.14.1.1.1
This variable is used as the basis for SNMP naming of appnDlu components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

appnDluComponentName 1.3.6.1.4.1.562.2.4.1.110.14.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnDluStorageType 1.3.6.1.4.1.562.2.4.1.110.14.1.1.4
This variable represents the storage type value for the appnDlu tables.
OBJECT-TYPE    
  StorageType  

appnDluIndex 1.3.6.1.4.1.562.2.4.1.110.14.1.1.10
This variable represents the index for the appnDlu tables.
OBJECT-TYPE    
  AsciiStringIndex SIZE(1..8)  

appnDluOperTable 1.3.6.1.4.1.562.2.4.1.110.14.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** The group contains the operational data for a dependent LU session.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDluOperEntry

appnDluOperEntry 1.3.6.1.4.1.562.2.4.1.110.14.10.1
An entry in the appnDluOperTable.
OBJECT-TYPE    
  AppnDluOperEntry  

appnDluSscpSessActive 1.3.6.1.4.1.562.2.4.1.110.14.10.1.1
This attribute tells whether the SSCP-LU session is active
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

appnDluPluSessActive 1.3.6.1.4.1.562.2.4.1.110.14.10.1.2
This attribute tells whether the dependent LU session is active.
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

appnDluDlusName 1.3.6.1.4.1.562.2.4.1.110.14.10.1.3
This attribute tells the name of the dependent LU server name that this dependent LU is connected to.
OBJECT-TYPE    
  AsciiString SIZE(0..17)  

appnDluPluName 1.3.6.1.4.1.562.2.4.1.110.14.10.1.4
This attribute tells the partner LU name of this dependent LU if the LU is connected, it is a NULL string if the dependent LU does not have an active session with a partner LU.
OBJECT-TYPE    
  AsciiString SIZE(0..17)  

appnDluNauAddress 1.3.6.1.4.1.562.2.4.1.110.14.10.1.5
This attribute gives the NAU address of the dependent LU.
OBJECT-TYPE    
  INTEGER 0..255  

appnDluSscp 1.3.6.1.4.1.562.2.4.1.110.14.100
OBJECT IDENTIFIER    

appnDluSscpRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.14.100.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of appnDluSscp components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDluSscpRowStatusEntry

appnDluSscpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.14.100.1.1
A single entry in the table represents a single appnDluSscp component.
OBJECT-TYPE    
  AppnDluSscpRowStatusEntry  

appnDluSscpRowStatus 1.3.6.1.4.1.562.2.4.1.110.14.100.1.1.1
This variable is used as the basis for SNMP naming of appnDluSscp components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

appnDluSscpComponentName 1.3.6.1.4.1.562.2.4.1.110.14.100.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnDluSscpStorageType 1.3.6.1.4.1.562.2.4.1.110.14.100.1.1.4
This variable represents the storage type value for the appnDluSscp tables.
OBJECT-TYPE    
  StorageType  

appnDluSscpIndex 1.3.6.1.4.1.562.2.4.1.110.14.100.1.1.10
This variable represents the index for the appnDluSscp tables.
OBJECT-TYPE    
  NonReplicated  

appnDluSscpStatsTable 1.3.6.1.4.1.562.2.4.1.110.14.100.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This component contains counters and statistics for a session.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDluSscpStatsEntry

appnDluSscpStatsEntry 1.3.6.1.4.1.562.2.4.1.110.14.100.10.1
An entry in the appnDluSscpStatsTable.
OBJECT-TYPE    
  AppnDluSscpStatsEntry  

appnDluSscpRxRuSize 1.3.6.1.4.1.562.2.4.1.110.14.100.10.1.1
This is the maximum request unit (RU) size that can be used on the session.
OBJECT-TYPE    
  Unsigned32 0..65535  

appnDluSscpMaxTxBtuSize 1.3.6.1.4.1.562.2.4.1.110.14.100.10.1.2
This is the maximum BTU size (length of the information field in a frame) that can be sent on the session.
OBJECT-TYPE    
  Unsigned32 0..65535  

appnDluSscpMaxRxBtuSize 1.3.6.1.4.1.562.2.4.1.110.14.100.10.1.3
This is the maximum BTU size (length of the information field in a frame) that can be received on the session.
OBJECT-TYPE    
  Unsigned32 0..65535  

appnDluSscpMaxTxPacWin 1.3.6.1.4.1.562.2.4.1.110.14.100.10.1.4
This is the maximum size of the send pacing window on the session.
OBJECT-TYPE    
  INTEGER 0..32767  

appnDluSscpCurTxPacWin 1.3.6.1.4.1.562.2.4.1.110.14.100.10.1.5
This is the current size of the send pacing window on the session.
OBJECT-TYPE    
  INTEGER 0..32767  

appnDluSscpMaxRxPacWin 1.3.6.1.4.1.562.2.4.1.110.14.100.10.1.6
This is the maximum size of the receive pacing window on the session.
OBJECT-TYPE    
  INTEGER 0..32767  

appnDluSscpCurRxPacWin 1.3.6.1.4.1.562.2.4.1.110.14.100.10.1.7
This is the current size of the receive pacing window on the session.
OBJECT-TYPE    
  INTEGER 0..32767  

appnDluSscpTxDataframes 1.3.6.1.4.1.562.2.4.1.110.14.100.10.1.8
This attribute counts the number of normal flow data frames sent on the session, the counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDluSscpTxFmdFrames 1.3.6.1.4.1.562.2.4.1.110.14.100.10.1.9
This attribute counts the number of FMD data frames sent on the session, the counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDluSscpTxDataBytes 1.3.6.1.4.1.562.2.4.1.110.14.100.10.1.10
This is the number of normal flow data bytes sent on the session, the counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDluSscpRxDataFrames 1.3.6.1.4.1.562.2.4.1.110.14.100.10.1.11
This is the number of normal flow data frames received on the session, the counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDluSscpRxFmdFrames 1.3.6.1.4.1.562.2.4.1.110.14.100.10.1.12
This attribute counts the number of FMD data frames received on the session, the counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDluSscpRxDataBytes 1.3.6.1.4.1.562.2.4.1.110.14.100.10.1.13
This is the number of normal flow data bytes received on the session, the counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDluSscpSidh 1.3.6.1.4.1.562.2.4.1.110.14.100.10.1.14
This attribute contains the session identifier high byte on the session.
OBJECT-TYPE    
  Hex 0..255  

appnDluSscpSidl 1.3.6.1.4.1.562.2.4.1.110.14.100.10.1.15
This attribute contains the session ID low byte on the SSCP session.
OBJECT-TYPE    
  Hex 0..255  

appnDluSscpOdai 1.3.6.1.4.1.562.2.4.1.110.14.100.10.1.16
This is the origin destination assignor indicator (ODAI) on the session.
OBJECT-TYPE    
  INTEGER primary(0), secondary(1)  

appnDluSscpLsName 1.3.6.1.4.1.562.2.4.1.110.14.100.10.1.17
This is the link station name associated with these counters and statistics. This is an 8 character name of the link station over which the data flowed. This field can be used to correlate the session statistics with the link over which session data flows.
OBJECT-TYPE    
  AsciiString SIZE(1..8)  

appnDluUsStat 1.3.6.1.4.1.562.2.4.1.110.14.101
OBJECT IDENTIFIER    

appnDluUsStatRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.14.101.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of appnDluUsStat components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDluUsStatRowStatusEntry

appnDluUsStatRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.14.101.1.1
A single entry in the table represents a single appnDluUsStat component.
OBJECT-TYPE    
  AppnDluUsStatRowStatusEntry  

appnDluUsStatRowStatus 1.3.6.1.4.1.562.2.4.1.110.14.101.1.1.1
This variable is used as the basis for SNMP naming of appnDluUsStat components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

appnDluUsStatComponentName 1.3.6.1.4.1.562.2.4.1.110.14.101.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnDluUsStatStorageType 1.3.6.1.4.1.562.2.4.1.110.14.101.1.1.4
This variable represents the storage type value for the appnDluUsStat tables.
OBJECT-TYPE    
  StorageType  

appnDluUsStatIndex 1.3.6.1.4.1.562.2.4.1.110.14.101.1.1.10
This variable represents the index for the appnDluUsStat tables.
OBJECT-TYPE    
  NonReplicated  

appnDluUsStatStatsTable 1.3.6.1.4.1.562.2.4.1.110.14.101.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This component contains counters and statistics for a session.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDluUsStatStatsEntry

appnDluUsStatStatsEntry 1.3.6.1.4.1.562.2.4.1.110.14.101.10.1
An entry in the appnDluUsStatStatsTable.
OBJECT-TYPE    
  AppnDluUsStatStatsEntry  

appnDluUsStatRxRuSize 1.3.6.1.4.1.562.2.4.1.110.14.101.10.1.1
This is the maximum request unit (RU) size that can be used on the session.
OBJECT-TYPE    
  Unsigned32 0..65535  

appnDluUsStatMaxTxBtuSize 1.3.6.1.4.1.562.2.4.1.110.14.101.10.1.2
This is the maximum BTU size (length of the information field in a frame) that can be sent on the session.
OBJECT-TYPE    
  Unsigned32 0..65535  

appnDluUsStatMaxRxBtuSize 1.3.6.1.4.1.562.2.4.1.110.14.101.10.1.3
This is the maximum BTU size (length of the information field in a frame) that can be received on the session.
OBJECT-TYPE    
  Unsigned32 0..65535  

appnDluUsStatMaxTxPacWin 1.3.6.1.4.1.562.2.4.1.110.14.101.10.1.4
This is the maximum size of the send pacing window on the session.
OBJECT-TYPE    
  INTEGER 0..32767  

appnDluUsStatCurTxPacWin 1.3.6.1.4.1.562.2.4.1.110.14.101.10.1.5
This is the current size of the send pacing window on the session.
OBJECT-TYPE    
  INTEGER 0..32767  

appnDluUsStatMaxRxPacWin 1.3.6.1.4.1.562.2.4.1.110.14.101.10.1.6
This is the maximum size of the receive pacing window on the session.
OBJECT-TYPE    
  INTEGER 0..32767  

appnDluUsStatCurRxPacWin 1.3.6.1.4.1.562.2.4.1.110.14.101.10.1.7
This is the current size of the receive pacing window on the session.
OBJECT-TYPE    
  INTEGER 0..32767  

appnDluUsStatTxDataframes 1.3.6.1.4.1.562.2.4.1.110.14.101.10.1.8
This attribute counts the number of normal flow data frames sent on the session, the counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDluUsStatTxFmdFrames 1.3.6.1.4.1.562.2.4.1.110.14.101.10.1.9
This attribute counts the number of FMD data frames sent on the session, the counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDluUsStatTxDataBytes 1.3.6.1.4.1.562.2.4.1.110.14.101.10.1.10
This is the number of normal flow data bytes sent on the session, the counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDluUsStatRxDataFrames 1.3.6.1.4.1.562.2.4.1.110.14.101.10.1.11
This is the number of normal flow data frames received on the session, the counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDluUsStatRxFmdFrames 1.3.6.1.4.1.562.2.4.1.110.14.101.10.1.12
This attribute counts the number of FMD data frames received on the session, the counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDluUsStatRxDataBytes 1.3.6.1.4.1.562.2.4.1.110.14.101.10.1.13
This is the number of normal flow data bytes received on the session, the counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDluUsStatSidh 1.3.6.1.4.1.562.2.4.1.110.14.101.10.1.14
This attribute contains the session identifier high byte on the session.
OBJECT-TYPE    
  Hex 0..255  

appnDluUsStatSidl 1.3.6.1.4.1.562.2.4.1.110.14.101.10.1.15
This attribute contains the session ID low byte on the SSCP session.
OBJECT-TYPE    
  Hex 0..255  

appnDluUsStatOdai 1.3.6.1.4.1.562.2.4.1.110.14.101.10.1.16
This is the origin destination assignor indicator (ODAI) on the session.
OBJECT-TYPE    
  INTEGER primary(0), secondary(1)  

appnDluUsStatLsName 1.3.6.1.4.1.562.2.4.1.110.14.101.10.1.17
This is the link station name associated with these counters and statistics. This is an 8 character name of the link station over which the data flowed. This field can be used to correlate the session statistics with the link over which session data flows.
OBJECT-TYPE    
  AsciiString SIZE(1..8)  

appnDluDsStat 1.3.6.1.4.1.562.2.4.1.110.14.102
OBJECT IDENTIFIER    

appnDluDsStatRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.14.102.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of appnDluDsStat components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDluDsStatRowStatusEntry

appnDluDsStatRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.14.102.1.1
A single entry in the table represents a single appnDluDsStat component.
OBJECT-TYPE    
  AppnDluDsStatRowStatusEntry  

appnDluDsStatRowStatus 1.3.6.1.4.1.562.2.4.1.110.14.102.1.1.1
This variable is used as the basis for SNMP naming of appnDluDsStat components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

appnDluDsStatComponentName 1.3.6.1.4.1.562.2.4.1.110.14.102.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnDluDsStatStorageType 1.3.6.1.4.1.562.2.4.1.110.14.102.1.1.4
This variable represents the storage type value for the appnDluDsStat tables.
OBJECT-TYPE    
  StorageType  

appnDluDsStatIndex 1.3.6.1.4.1.562.2.4.1.110.14.102.1.1.10
This variable represents the index for the appnDluDsStat tables.
OBJECT-TYPE    
  NonReplicated  

appnDluDsStatStatsTable 1.3.6.1.4.1.562.2.4.1.110.14.102.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This component contains counters and statistics for a session.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDluDsStatStatsEntry

appnDluDsStatStatsEntry 1.3.6.1.4.1.562.2.4.1.110.14.102.10.1
An entry in the appnDluDsStatStatsTable.
OBJECT-TYPE    
  AppnDluDsStatStatsEntry  

appnDluDsStatRxRuSize 1.3.6.1.4.1.562.2.4.1.110.14.102.10.1.1
This is the maximum request unit (RU) size that can be used on the session.
OBJECT-TYPE    
  Unsigned32 0..65535  

appnDluDsStatMaxTxBtuSize 1.3.6.1.4.1.562.2.4.1.110.14.102.10.1.2
This is the maximum BTU size (length of the information field in a frame) that can be sent on the session.
OBJECT-TYPE    
  Unsigned32 0..65535  

appnDluDsStatMaxRxBtuSize 1.3.6.1.4.1.562.2.4.1.110.14.102.10.1.3
This is the maximum BTU size (length of the information field in a frame) that can be received on the session.
OBJECT-TYPE    
  Unsigned32 0..65535  

appnDluDsStatMaxTxPacWin 1.3.6.1.4.1.562.2.4.1.110.14.102.10.1.4
This is the maximum size of the send pacing window on the session.
OBJECT-TYPE    
  INTEGER 0..32767  

appnDluDsStatCurTxPacWin 1.3.6.1.4.1.562.2.4.1.110.14.102.10.1.5
This is the current size of the send pacing window on the session.
OBJECT-TYPE    
  INTEGER 0..32767  

appnDluDsStatMaxRxPacWin 1.3.6.1.4.1.562.2.4.1.110.14.102.10.1.6
This is the maximum size of the receive pacing window on the session.
OBJECT-TYPE    
  INTEGER 0..32767  

appnDluDsStatCurRxPacWin 1.3.6.1.4.1.562.2.4.1.110.14.102.10.1.7
This is the current size of the receive pacing window on the session.
OBJECT-TYPE    
  INTEGER 0..32767  

appnDluDsStatTxDataframes 1.3.6.1.4.1.562.2.4.1.110.14.102.10.1.8
This attribute counts the number of normal flow data frames sent on the session, the counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDluDsStatTxFmdFrames 1.3.6.1.4.1.562.2.4.1.110.14.102.10.1.9
This attribute counts the number of FMD data frames sent on the session, the counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDluDsStatTxDataBytes 1.3.6.1.4.1.562.2.4.1.110.14.102.10.1.10
This is the number of normal flow data bytes sent on the session, the counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDluDsStatRxDataFrames 1.3.6.1.4.1.562.2.4.1.110.14.102.10.1.11
This is the number of normal flow data frames received on the session, the counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDluDsStatRxFmdFrames 1.3.6.1.4.1.562.2.4.1.110.14.102.10.1.12
This attribute counts the number of FMD data frames received on the session, the counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDluDsStatRxDataBytes 1.3.6.1.4.1.562.2.4.1.110.14.102.10.1.13
This is the number of normal flow data bytes received on the session, the counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDluDsStatSidh 1.3.6.1.4.1.562.2.4.1.110.14.102.10.1.14
This attribute contains the session identifier high byte on the session.
OBJECT-TYPE    
  Hex 0..255  

appnDluDsStatSidl 1.3.6.1.4.1.562.2.4.1.110.14.102.10.1.15
This attribute contains the session ID low byte on the SSCP session.
OBJECT-TYPE    
  Hex 0..255  

appnDluDsStatOdai 1.3.6.1.4.1.562.2.4.1.110.14.102.10.1.16
This is the origin destination assignor indicator (ODAI) on the session.
OBJECT-TYPE    
  INTEGER primary(0), secondary(1)  

appnDluDsStatLsName 1.3.6.1.4.1.562.2.4.1.110.14.102.10.1.17
This is the link station name associated with these counters and statistics. This is an 8 character name of the link station over which the data flowed. This field can be used to correlate the session statistics with the link over which session data flows.
OBJECT-TYPE    
  AsciiString SIZE(1..8)  

appnDlus 1.3.6.1.4.1.562.2.4.1.110.15
OBJECT IDENTIFIER    

appnDlusRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.15.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of appnDlus components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDlusRowStatusEntry

appnDlusRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.15.1.1
A single entry in the table represents a single appnDlus component.
OBJECT-TYPE    
  AppnDlusRowStatusEntry  

appnDlusRowStatus 1.3.6.1.4.1.562.2.4.1.110.15.1.1.1
This variable is used as the basis for SNMP naming of appnDlus components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

appnDlusComponentName 1.3.6.1.4.1.562.2.4.1.110.15.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnDlusStorageType 1.3.6.1.4.1.562.2.4.1.110.15.1.1.4
This variable represents the storage type value for the appnDlus tables.
OBJECT-TYPE    
  StorageType  

appnDlusIndex 1.3.6.1.4.1.562.2.4.1.110.15.1.1.10
This variable represents the index for the appnDlus tables.
OBJECT-TYPE    
  AsciiStringIndex SIZE(1..17)  

appnDlusOperTable 1.3.6.1.4.1.562.2.4.1.110.15.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Information on the DLUR-DLUS pipe.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDlusOperEntry

appnDlusOperEntry 1.3.6.1.4.1.562.2.4.1.110.15.10.1
An entry in the appnDlusOperTable.
OBJECT-TYPE    
  AppnDlusOperEntry  

appnDlusPrimaryDlus 1.3.6.1.4.1.562.2.4.1.110.15.10.1.1
This attribute indicates if this is the pipe to the primary default dependent LU server.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

appnDlusPipeState 1.3.6.1.4.1.562.2.4.1.110.15.10.1.2
This attribute indicates the current state of the DLUR-DLUS pipe. inactive indicates the pipe is not connected (the session has likely failed), pendingActive indicates the pipe is connecting, active indicates the pipe is currently connected and data is flowing, and pendingInactive indicates the pipe is being disconnected.
OBJECT-TYPE    
  INTEGER inactive(0), pendingActive(1), active(2), pendingInactive(3)  

appnDlusActivePUs 1.3.6.1.4.1.562.2.4.1.110.15.10.1.3
This attribute indicates the number of active physical units using the pipe.
OBJECT-TYPE    
  Gauge32 0..32767  

appnDlusDlusStatTable 1.3.6.1.4.1.562.2.4.1.110.15.11
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the counters and statistics for the DLUR-DLUS pipe
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDlusDlusStatEntry

appnDlusDlusStatEntry 1.3.6.1.4.1.562.2.4.1.110.15.11.1
An entry in the appnDlusDlusStatTable.
OBJECT-TYPE    
  AppnDlusDlusStatEntry  

appnDlusReqActPuTx 1.3.6.1.4.1.562.2.4.1.110.15.11.1.1
This attribute counts the number of REQACTPUs sent to the DLUS. The counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDlusReqActPuRspRx 1.3.6.1.4.1.562.2.4.1.110.15.11.1.2
This attribute counts the number of REQACTPU responses received from the DLUS. The counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDlusActPuRx 1.3.6.1.4.1.562.2.4.1.110.15.11.1.3
This attributes counts the number of ACTPUs received from the DLUS. The counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDlusActPuRspTx 1.3.6.1.4.1.562.2.4.1.110.15.11.1.4
This attribute counts the number of ACTPU responses sent to the DLUS. The counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDlusReqDactPuTx 1.3.6.1.4.1.562.2.4.1.110.15.11.1.5
This attribute counts the number of REQDACTPUs sent to the DLUS. The counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDlusReqDactPuRspRx 1.3.6.1.4.1.562.2.4.1.110.15.11.1.6
This attribute counts the number of REQDACTPU responses received from the DLUS. The counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDlusDactPuRx 1.3.6.1.4.1.562.2.4.1.110.15.11.1.7
This attribute counts the number of DACTPUs received from the DLUS. The counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDlusDactPuRspTx 1.3.6.1.4.1.562.2.4.1.110.15.11.1.8
This attribute counts the number of DACTPU responses received from the DLUS. The counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDlusActLuRx 1.3.6.1.4.1.562.2.4.1.110.15.11.1.9
This attribute counts the number of ACTLUs received from the DLUS. The counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDlusActLuRspTx 1.3.6.1.4.1.562.2.4.1.110.15.11.1.10
This attribute counts the number of ACTLU responses sent to the DLUS. The counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDlusDactLuRx 1.3.6.1.4.1.562.2.4.1.110.15.11.1.11
This attribute counts the number of DACTLUs received from the DLUS. The counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDlusDactLuRspTx 1.3.6.1.4.1.562.2.4.1.110.15.11.1.12
This attribute counts the number of DACTLU responses sent to the DLUS. The counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDlusSscpPuMuRx 1.3.6.1.4.1.562.2.4.1.110.15.11.1.13
This attribute counts the number of SSCP-PU MUs received. The counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDlusSscpPuMuTx 1.3.6.1.4.1.562.2.4.1.110.15.11.1.14
This attribute counts the number of SSCP-PU MUs sent. The counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDlusSscpLuMuRx 1.3.6.1.4.1.562.2.4.1.110.15.11.1.15
This attributes counts the number of SSCP-LU MUs received. The counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDlusSscpLuMuTx 1.3.6.1.4.1.562.2.4.1.110.15.11.1.16
This attributes counts the number of SSCP-LU MUs sent. The counter wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

appnDLUR 1.3.6.1.4.1.562.2.4.1.110.16
OBJECT IDENTIFIER    

appnDLURRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.16.1
This entry controls the addition and deletion of appnDLUR components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDLURRowStatusEntry

appnDLURRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.16.1.1
A single entry in the table represents a single appnDLUR component.
OBJECT-TYPE    
  AppnDLURRowStatusEntry  

appnDLURRowStatus 1.3.6.1.4.1.562.2.4.1.110.16.1.1.1
This variable is used as the basis for SNMP naming of appnDLUR components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

appnDLURComponentName 1.3.6.1.4.1.562.2.4.1.110.16.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnDLURStorageType 1.3.6.1.4.1.562.2.4.1.110.16.1.1.4
This variable represents the storage type value for the appnDLUR tables.
OBJECT-TYPE    
  StorageType  

appnDLURIndex 1.3.6.1.4.1.562.2.4.1.110.16.1.1.10
This variable represents the index for the appnDLUR tables.
OBJECT-TYPE    
  NonReplicated  

appnDLURDlurParmsTable 1.3.6.1.4.1.562.2.4.1.110.16.2
These parameters define the dependent LU requester options.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnDLURDlurParmsEntry

appnDLURDlurParmsEntry 1.3.6.1.4.1.562.2.4.1.110.16.2.1
An entry in the appnDLURDlurParmsTable.
OBJECT-TYPE    
  AppnDLURDlurParmsEntry  

appnDLURPrimaryDefDlusName 1.3.6.1.4.1.562.2.4.1.110.16.2.1.2
The fully qualified CP name of the node that will serve as the primary dependent LU server (DLUS).
OBJECT-TYPE    
  AsciiString SIZE(3..17)  

appnDLURSecondaryDefDlusName 1.3.6.1.4.1.562.2.4.1.110.16.2.1.3
The fully qualified CP name of the node that will serve as the backup or secondary dependent LU server (DLUS).
OBJECT-TYPE    
  AsciiString SIZE(0..17)  

appnDLURDlusRetryTimeout 1.3.6.1.4.1.562.2.4.1.110.16.2.1.4
This attribute specifies the time in seconds before a network search to locate a DLUS times out.
OBJECT-TYPE    
  Unsigned32 1..65535  

appnDLURDlusRetryLimit 1.3.6.1.4.1.562.2.4.1.110.16.2.1.5
This attribute specifies the maximum number of retry attempts that will be made after an initial failure to contact a DLUS. If zero is specifed, APPN will retry indefinitely. When this limit has been reached, downstream PUs that are connected to APPN will be sent a QDISC frame.
OBJECT-TYPE    
  Unsigned32 0..65535  

appnCos 1.3.6.1.4.1.562.2.4.1.110.17
OBJECT IDENTIFIER    

appnCosRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.17.1
This entry controls the addition and deletion of appnCos components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnCosRowStatusEntry

appnCosRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.17.1.1
A single entry in the table represents a single appnCos component.
OBJECT-TYPE    
  AppnCosRowStatusEntry  

appnCosRowStatus 1.3.6.1.4.1.562.2.4.1.110.17.1.1.1
This variable is used as the basis for SNMP naming of appnCos components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

appnCosComponentName 1.3.6.1.4.1.562.2.4.1.110.17.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnCosStorageType 1.3.6.1.4.1.562.2.4.1.110.17.1.1.4
This variable represents the storage type value for the appnCos tables.
OBJECT-TYPE    
  StorageType  

appnCosIndex 1.3.6.1.4.1.562.2.4.1.110.17.1.1.10
This variable represents the index for the appnCos tables.
OBJECT-TYPE    
  AsciiStringIndex SIZE(1..8)  

appnCosTg 1.3.6.1.4.1.562.2.4.1.110.17.10
OBJECT IDENTIFIER    

appnCosTgRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.17.10.1
This entry controls the addition and deletion of appnCosTg components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnCosTgRowStatusEntry

appnCosTgRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.17.10.1.1
A single entry in the table represents a single appnCosTg component.
OBJECT-TYPE    
  AppnCosTgRowStatusEntry  

appnCosTgRowStatus 1.3.6.1.4.1.562.2.4.1.110.17.10.1.1.1
This variable is used as the basis for SNMP naming of appnCosTg components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

appnCosTgComponentName 1.3.6.1.4.1.562.2.4.1.110.17.10.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnCosTgStorageType 1.3.6.1.4.1.562.2.4.1.110.17.10.1.1.4
This variable represents the storage type value for the appnCosTg tables.
OBJECT-TYPE    
  StorageType  

appnCosTgIndex 1.3.6.1.4.1.562.2.4.1.110.17.10.1.1.10
This variable represents the index for the appnCosTg tables.
OBJECT-TYPE    
  Integer32 1..255  

appnCosTgProvTable 1.3.6.1.4.1.562.2.4.1.110.17.10.10
This group specifies a range of TG characteristics for a class of service and is used in route selection for session traffic. During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnCosTgProvEntry

appnCosTgProvEntry 1.3.6.1.4.1.562.2.4.1.110.17.10.10.1
An entry in the appnCosTgProvTable.
OBJECT-TYPE    
  AppnCosTgProvEntry  

appnCosTgMinEffectiveCapacity 1.3.6.1.4.1.562.2.4.1.110.17.10.10.1.1
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the minimum acceptable speed for a TG using this Class of Service.
OBJECT-TYPE    
  INTEGER min(0), n170bps(1), n190bps(2), n210bps(3), n230bps(4), n240bps(5), n260bps(6), n280bps(7), n300bps(8), n340bps(9), n380bps(10), n410bps(11), n450bps(12), n490bps(13), n530bps(14), n560bps(15), n600bps(16), n680bps(17), n750bps(18), n830bps(19), n900bps(20), n980bps(21), n1050bps(22), n1130bps(23), n1200bps(24), n1350bps(25), n1500bps(26), n1700bps(27), n1800bps(28), n2000bps(29), n2100bps(30), n2300bps(31), n2400bps(32), n2700bps(33), n3000bps(34), n3300bps(35), n3600bps(36), n3900bps(37), n4200bps(38), n4500bps(39), n4800bps(40), n5400bps(41), n6000bps(42), n6600bps(43), n7200bps(44), n7800bps(45), n8400bps(46), n9000bps(47), n9600bps(48), n10800bps(49), n12000bps(50), n13200bps(51), n14400bps(52), n15600bps(53), n17kbps(54), n18kbps(55), n19kbps(56), n22kbps(57), n24kbps(58), n26kbps(59), n29kbps(60), n31kbps(61), n34kbps(62), n36kbps(63), n38kbps(64), n43kbps(65), n48kbps(66), n53kbps(67), n58kbps(68), n62kbps(69), n67kbps(70), n72kbps(71), n77kbps(72), n86kbps(73), n96kbps(74), n106kbps(75), n115kbps(76), n125kbps(77), n134kbps(78), n144kbps(79), n154kbps(80), n170kbps(81), n190kbps(82), n210kbps(83), n230kbps(84), n250kbps(85), n270kbps(86), n290kbps(87), n310kbps(88), n350kbps(89), n380kbps(90), n420kbps(91), n460kbps(92), n500kbps(93), n540kbps(94), n580kbps(95), n610kbps(96), n690kbps(97), n770kbps(98), n840kbps(99), n920kbps(100), n1000kbps(101), n1080kbps(102), n1150kbps(103), n1230kbps(104), n1380kbps(105), n1540kbps(106), n1700kbps(107), n1800kbps(108), n2000kbps(109), n2200kbps(110), n2300kbps(111), n2500kbps(112), n2800kbps(113), n3100kbps(114), n3400kbps(115), n3700kbps(116), n4000kbps(117), n4300kbps(118), n4600kbps(119), n4900kbps(120), n5500kbps(121), n6100kbps(122), n6800kbps(123), n7400kbps(124), n8000kbps(125), n8600kbps(126), n9200kbps(127), n9800kbps(128), n11100kbps(129), n12300kbps(130), n13500kbps(131), n14700kbps(132), n16Mbps(133), n17Mbps(134), n18Mbps(135), n20Mbps(136), n22Mbps(137), n25Mbps(138), n27Mbps(139), n29Mbps(140), n32Mbps(141), n34Mbps(142), n37Mbps(143), n39Mbps(144), n44Mbps(145), n49Mbps(146), n54Mbps(147), n59Mbps(148), n64Mbps(149), n69Mbps(150), n74Mbps(151), n79Mbps(152), n88Mbps(153), n98Mbps(154), n108Mbps(155), n118Mbps(156), n128Mbps(157), n138Mbps(158), n147Mbps(159), n157Mbps(160), n180Mbps(161), n200Mbps(162), n220Mbps(163), n240Mbps(164), n260Mbps(165), n280Mbps(166), n290Mbps(167), n310Mbps(168), n350Mbps(169), n390Mbps(170), n430Mbps(171), n470Mbps(172), n510Mbps(173), n550Mbps(174), n590Mbps(175), n630Mbps(176), n710Mbps(177), n790Mbps(178), n870Mbps(179), n940Mbps(180), n1020Mbps(181), n1100Mbps(182), n1180Mbps(183), n1260Mbps(184), n1420Mbps(185), n1570Mbps(186), n1700Mbps(187), n1900Mbps(188), n2000Mbps(189), n2200Mbps(190), n2400Mbps(191), n2500Mbps(192), n2800Mbps(193), n3100Mbps(194), n3500Mbps(195), n3800Mbps(196), n4100Mbps(197), n4400Mbps(198), n4700Mbps(199), n5000Mbps(200), n5700Mbps(201), n6300Mbps(202), n6900Mbps(203), n7500Mbps(204), n8200Mbps(205), n8800Mbps(206), n9400Mbps(207), n10100Mbps(208), n11300Mbps(209), n12600Mbps(210), n13800Mbps(211), n15100Mbps(212), n16Gbps(213), n18Gbps(214), n19Gbps(215), n20Gbps(216), n23Gbps(217), n25Gbps(218), n28Gbps(219), n30Gbps(220), n33Gbps(221), n35Gbps(222), n38Gbps(223), n40Gbps(224), n45Gbps(225), n50Gbps(226), n55Gbps(227), n60Gbps(228), n65Gbps(229), n70Gbps(230), n75Gbps(231), n81Gbps(232), n91Gbps(233), n101Gbps(234), n111Gbps(235), n121Gbps(236), n131Gbps(237), n141Gbps(238), n151Gbps(239), n160Gbps(240), n180Gbps(241), n200Gbps(242), n220Gbps(243), n240Gbps(244), n260Gbps(245), n280Gbps(246), n300Gbps(247), n320Gbps(248), n360Gbps(249), n400Gbps(250), n440Gbps(251), n480Gbps(252), n520Gbps(253), n560Gbps(254), max(255)  

appnCosTgMaxEffectiveCapacity 1.3.6.1.4.1.562.2.4.1.110.17.10.10.1.2
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum acceptable speed for a TG using this Class of Service.
OBJECT-TYPE    
  INTEGER min(0), n170bps(1), n190bps(2), n210bps(3), n230bps(4), n240bps(5), n260bps(6), n280bps(7), n300bps(8), n340bps(9), n380bps(10), n410bps(11), n450bps(12), n490bps(13), n530bps(14), n560bps(15), n600bps(16), n680bps(17), n750bps(18), n830bps(19), n900bps(20), n980bps(21), n1050bps(22), n1130bps(23), n1200bps(24), n1350bps(25), n1500bps(26), n1700bps(27), n1800bps(28), n2000bps(29), n2100bps(30), n2300bps(31), n2400bps(32), n2700bps(33), n3000bps(34), n3300bps(35), n3600bps(36), n3900bps(37), n4200bps(38), n4500bps(39), n4800bps(40), n5400bps(41), n6000bps(42), n6600bps(43), n7200bps(44), n7800bps(45), n8400bps(46), n9000bps(47), n9600bps(48), n10800bps(49), n12000bps(50), n13200bps(51), n14400bps(52), n15600bps(53), n17kbps(54), n18kbps(55), n19kbps(56), n22kbps(57), n24kbps(58), n26kbps(59), n29kbps(60), n31kbps(61), n34kbps(62), n36kbps(63), n38kbps(64), n43kbps(65), n48kbps(66), n53kbps(67), n58kbps(68), n62kbps(69), n67kbps(70), n72kbps(71), n77kbps(72), n86kbps(73), n96kbps(74), n106kbps(75), n115kbps(76), n125kbps(77), n134kbps(78), n144kbps(79), n154kbps(80), n170kbps(81), n190kbps(82), n210kbps(83), n230kbps(84), n250kbps(85), n270kbps(86), n290kbps(87), n310kbps(88), n350kbps(89), n380kbps(90), n420kbps(91), n460kbps(92), n500kbps(93), n540kbps(94), n580kbps(95), n610kbps(96), n690kbps(97), n770kbps(98), n840kbps(99), n920kbps(100), n1000kbps(101), n1080kbps(102), n1150kbps(103), n1230kbps(104), n1380kbps(105), n1540kbps(106), n1700kbps(107), n1800kbps(108), n2000kbps(109), n2200kbps(110), n2300kbps(111), n2500kbps(112), n2800kbps(113), n3100kbps(114), n3400kbps(115), n3700kbps(116), n4000kbps(117), n4300kbps(118), n4600kbps(119), n4900kbps(120), n5500kbps(121), n6100kbps(122), n6800kbps(123), n7400kbps(124), n8000kbps(125), n8600kbps(126), n9200kbps(127), n9800kbps(128), n11100kbps(129), n12300kbps(130), n13500kbps(131), n14700kbps(132), n16Mbps(133), n17Mbps(134), n18Mbps(135), n20Mbps(136), n22Mbps(137), n25Mbps(138), n27Mbps(139), n29Mbps(140), n32Mbps(141), n34Mbps(142), n37Mbps(143), n39Mbps(144), n44Mbps(145), n49Mbps(146), n54Mbps(147), n59Mbps(148), n64Mbps(149), n69Mbps(150), n74Mbps(151), n79Mbps(152), n88Mbps(153), n98Mbps(154), n108Mbps(155), n118Mbps(156), n128Mbps(157), n138Mbps(158), n147Mbps(159), n157Mbps(160), n180Mbps(161), n200Mbps(162), n220Mbps(163), n240Mbps(164), n260Mbps(165), n280Mbps(166), n290Mbps(167), n310Mbps(168), n350Mbps(169), n390Mbps(170), n430Mbps(171), n470Mbps(172), n510Mbps(173), n550Mbps(174), n590Mbps(175), n630Mbps(176), n710Mbps(177), n790Mbps(178), n870Mbps(179), n940Mbps(180), n1020Mbps(181), n1100Mbps(182), n1180Mbps(183), n1260Mbps(184), n1420Mbps(185), n1570Mbps(186), n1700Mbps(187), n1900Mbps(188), n2000Mbps(189), n2200Mbps(190), n2400Mbps(191), n2500Mbps(192), n2800Mbps(193), n3100Mbps(194), n3500Mbps(195), n3800Mbps(196), n4100Mbps(197), n4400Mbps(198), n4700Mbps(199), n5000Mbps(200), n5700Mbps(201), n6300Mbps(202), n6900Mbps(203), n7500Mbps(204), n8200Mbps(205), n8800Mbps(206), n9400Mbps(207), n10100Mbps(208), n11300Mbps(209), n12600Mbps(210), n13800Mbps(211), n15100Mbps(212), n16Gbps(213), n18Gbps(214), n19Gbps(215), n20Gbps(216), n23Gbps(217), n25Gbps(218), n28Gbps(219), n30Gbps(220), n33Gbps(221), n35Gbps(222), n38Gbps(223), n40Gbps(224), n45Gbps(225), n50Gbps(226), n55Gbps(227), n60Gbps(228), n65Gbps(229), n70Gbps(230), n75Gbps(231), n81Gbps(232), n91Gbps(233), n101Gbps(234), n111Gbps(235), n121Gbps(236), n131Gbps(237), n141Gbps(238), n151Gbps(239), n160Gbps(240), n180Gbps(241), n200Gbps(242), n220Gbps(243), n240Gbps(244), n260Gbps(245), n280Gbps(246), n300Gbps(247), n320Gbps(248), n360Gbps(249), n400Gbps(250), n440Gbps(251), n480Gbps(252), n520Gbps(253), n560Gbps(254), max(255)  

appnCosTgMinConnectCost 1.3.6.1.4.1.562.2.4.1.110.17.10.10.1.3
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the minimum cost per connect time for a TG. It is represented by a number between 0 and 255 and is the relative cost of using a TG. The units for cost-per-connect time are installation-defined and are typically based on the applicable tariffs of the transmission facility being used by the TG. The cost-per-connect time values that a network administrator assigns to the TGs in a network should reflect the relative expense of each TG as compared to all other TGs in the network. A value of 0 means that there is no additional cost in connecting over the TG(as in the case of a non-switched facility).
OBJECT-TYPE    
  INTEGER 0..255  

appnCosTgMaxConnectCost 1.3.6.1.4.1.562.2.4.1.110.17.10.10.1.4
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum cost per connect time for a TG. It is represented by a number between 0 and 255 and is the relative cost of using a TG. The units for cost-per-connect time are installation-defined and are typically based on the applicable tariffs of the transmission facility being used by the TG. The cost per connect time values that a network administrator assigns to the TGs in a network should reflect the relative expense of each TG as compared to all other TGs in the network. A value of 0 means that there is no additional cost in connecting over the TG (as in the case of a non-switched facility).
OBJECT-TYPE    
  INTEGER 0..255  

appnCosTgMinByteCost 1.3.6.1.4.1.562.2.4.1.110.17.10.10.1.5
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the minimum cost per byte allowed for a TG to be used for a session. It is a single byte value in the range 0 to 255 that expresses a relative cost of transmitting a byte over the associated TG. The units for cost per byte are user defined. Like cost per connect time, cost per byte is network specific and will not be uniform across networks unless assignments are coordinated.
OBJECT-TYPE    
  INTEGER 0..255  

appnCosTgMaxByteCost 1.3.6.1.4.1.562.2.4.1.110.17.10.10.1.6
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum cost per byte allowed for a TG to be used for a session. It is a single byte value in the range 0 to 255 that expresses a relative cost of transmitting a byte over the associated TG. The units for cost per byte are user defined. Like cost per connect time, cost per byte is network specific and will not be uniform across networks unless assignments are coordinated.
OBJECT-TYPE    
  INTEGER 0..255  

appnCosTgMinSecurity 1.3.6.1.4.1.562.2.4.1.110.17.10.10.1.7
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the minimum level of security protection required for a TG to be allowed to route session traffic. The security values are architecturally defined to provide continuity across all networks. Currently, security is encoded as one of the following seven values: guardedRadiation - guarded conduit containing the transmission medium; protected against physical and radiation tapping. encrypted - link level encryption is provided guardedConduit - guarded conduit; protected against physical tapping secureConduit- secure conduit, not guarded; e.g. pressurized pipe undergroundCable - underground cable located in a secure country publicSwitchedNetwork - public switched network; secure in the sense that there is no predetermined route that traffic will take nonSecure - all else, for example satellite-connected, located in a nonsecure country.
OBJECT-TYPE    
  INTEGER nonSecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192)  

appnCosTgMaxSecurity 1.3.6.1.4.1.562.2.4.1.110.17.10.10.1.8
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum level of security protection required for a TG to be allowed to route session traffic. The security values are architecturally defined to provide continuity across all networks. Currently, security is encoded as one of the following seven values: guardedRadiation - guarded conduit containing the transmission medium; protected against physical and radiation tapping. encrypted - link level encryption is provided guardedConduit - guarded conduit; protected against physical tapping secureConduit- secure conduit, not guarded; e.g. pressurized pipe undergroundCable - underground cable located in a secure country publicSwitchedNetwork - public switched network; secure in the sense that there is no predetermined route that traffic will take nonSecure - all else, for example. satellite-connected, located in a nonsecure country.
OBJECT-TYPE    
  INTEGER nonSecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192)  

appnCosTgMinPropDelay 1.3.6.1.4.1.562.2.4.1.110.17.10.10.1.9
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the minimum propagation delay for this Class of Service. Propogation delay is the length of time that it takes for a signal to propagate from one end of the TG to the other. Possible values are: minimum - minimum negligible - 400 microsec terrestrial - 10 msec packetSwitched - 150 msec long - 300 msec
OBJECT-TYPE    
  INTEGER minimum(0), negligible(76), terrestrial(113), packetSwitched(145), long(153), maximum(255)  

appnCosTgMaxPropDelay 1.3.6.1.4.1.562.2.4.1.110.17.10.10.1.10
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum propagation delay for this Class of Service. Propagation delay is the length of time that it takes for a signal to propagate from one end of the TG to the other. Possible values are: minimum - minimum negligible - 400 microsec terrestrial - 10 msec packetSwitched - 150 msec long - 300 msec
OBJECT-TYPE    
  INTEGER minimum(0), negligible(76), terrestrial(113), packetSwitched(145), long(153), maximum(255)  

appnCosTgMinModemClass 1.3.6.1.4.1.562.2.4.1.110.17.10.10.1.11
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the minimum modem class allowed for a TG to carry session traffic.
OBJECT-TYPE    
  INTEGER 0..255  

appnCosTgMaxModemClass 1.3.6.1.4.1.562.2.4.1.110.17.10.10.1.12
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum modem class allowed for a TG to carry session traffic.
OBJECT-TYPE    
  INTEGER 0..255  

appnCosTgMinUserDefParm1 1.3.6.1.4.1.562.2.4.1.110.17.10.10.1.13
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the minimum acceptable value for user defined routing parameter number 1.
OBJECT-TYPE    
  INTEGER 0..255  

appnCosTgMaxUserDefParm1 1.3.6.1.4.1.562.2.4.1.110.17.10.10.1.14
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum acceptable value for user defined routing parameter number 1.
OBJECT-TYPE    
  INTEGER 0..255  

appnCosTgMinUserDefParm2 1.3.6.1.4.1.562.2.4.1.110.17.10.10.1.15
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the minimum acceptable value for user defined routing parameter number 2.
OBJECT-TYPE    
  INTEGER 0..255  

appnCosTgMaxUserDefParm2 1.3.6.1.4.1.562.2.4.1.110.17.10.10.1.16
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum acceptable value for user defined routing parameter number 2.
OBJECT-TYPE    
  INTEGER 0..255  

appnCosTgMinUserDefParm3 1.3.6.1.4.1.562.2.4.1.110.17.10.10.1.17
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the minimum acceptable value for user defined routing parameter number 3.
OBJECT-TYPE    
  INTEGER 0..255  

appnCosTgMaxUserDefParm3 1.3.6.1.4.1.562.2.4.1.110.17.10.10.1.18
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and contains the maximum acceptable value for user defined routing parameter number 3.
OBJECT-TYPE    
  INTEGER 0..255  

appnCosNode 1.3.6.1.4.1.562.2.4.1.110.17.11
OBJECT IDENTIFIER    

appnCosNodeRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.17.11.1
This entry controls the addition and deletion of appnCosNode components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnCosNodeRowStatusEntry

appnCosNodeRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.17.11.1.1
A single entry in the table represents a single appnCosNode component.
OBJECT-TYPE    
  AppnCosNodeRowStatusEntry  

appnCosNodeRowStatus 1.3.6.1.4.1.562.2.4.1.110.17.11.1.1.1
This variable is used as the basis for SNMP naming of appnCosNode components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

appnCosNodeComponentName 1.3.6.1.4.1.562.2.4.1.110.17.11.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnCosNodeStorageType 1.3.6.1.4.1.562.2.4.1.110.17.11.1.1.4
This variable represents the storage type value for the appnCosNode tables.
OBJECT-TYPE    
  StorageType  

appnCosNodeIndex 1.3.6.1.4.1.562.2.4.1.110.17.11.1.1.10
This variable represents the index for the appnCosNode tables.
OBJECT-TYPE    
  Integer32 1..255  

appnCosNodeProvTable 1.3.6.1.4.1.562.2.4.1.110.17.11.10
This group specifies a range of node characteristics for a class of service and is used in route selection for session traffic. During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnCosNodeProvEntry

appnCosNodeProvEntry 1.3.6.1.4.1.562.2.4.1.110.17.11.10.1
An entry in the appnCosNodeProvTable.
OBJECT-TYPE    
  AppnCosNodeProvEntry  

appnCosNodeMinRouteAddResistance 1.3.6.1.4.1.562.2.4.1.110.17.11.10.1.1
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the minimum route addition resistance value allowed for a node to route session traffic. Route addition resistance defines the desirability for a network node to perform additional intermediate session routing. The higher the value, the less desirable the node is for session routing purposes.
OBJECT-TYPE    
  INTEGER 0..255  

appnCosNodeMaxRouteAddResistance 1.3.6.1.4.1.562.2.4.1.110.17.11.10.1.2
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum route addition resistance value allowed for a node to route session traffic. Route addition resistance defines the desirability for a network node to perform additional intermediate session routing. The higher the value, the less desirable the node is for session routing purposes.
OBJECT-TYPE    
  INTEGER 0..255  

appnCosNodeMinStatus 1.3.6.1.4.1.562.2.4.1.110.17.11.10.1.3
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the minimum congestion value that will be allowed for a node to carry session traffic.
OBJECT-TYPE    
  INTEGER uncongested(0), congested(1)  

appnCosNodeMaxStatus 1.3.6.1.4.1.562.2.4.1.110.17.11.10.1.4
During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum congestion value that will be allowed for a node to carry session traffic.
OBJECT-TYPE    
  INTEGER uncongested(0), congested(1)  

appnCosProvTable 1.3.6.1.4.1.562.2.4.1.110.17.104
This provisioning group specifies the transmission priority associated with a Class of Service.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnCosProvEntry

appnCosProvEntry 1.3.6.1.4.1.562.2.4.1.110.17.104.1
An entry in the appnCosProvTable.
OBJECT-TYPE    
  AppnCosProvEntry  

appnCosTransmissionPriority 1.3.6.1.4.1.562.2.4.1.110.17.104.1.1
This attribute specifies the transmission priority of session traffic using this class of service.
OBJECT-TYPE    
  INTEGER low(1), medium(2), high(3), network(4)  

appnFrSvc 1.3.6.1.4.1.562.2.4.1.110.18
OBJECT IDENTIFIER    

appnFrSvcRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.18.1
This entry controls the addition and deletion of appnFrSvc components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnFrSvcRowStatusEntry

appnFrSvcRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.18.1.1
A single entry in the table represents a single appnFrSvc component.
OBJECT-TYPE    
  AppnFrSvcRowStatusEntry  

appnFrSvcRowStatus 1.3.6.1.4.1.562.2.4.1.110.18.1.1.1
This variable is used as the basis for SNMP naming of appnFrSvc components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

appnFrSvcComponentName 1.3.6.1.4.1.562.2.4.1.110.18.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnFrSvcStorageType 1.3.6.1.4.1.562.2.4.1.110.18.1.1.4
This variable represents the storage type value for the appnFrSvc tables.
OBJECT-TYPE    
  StorageType  

appnFrSvcIndex 1.3.6.1.4.1.562.2.4.1.110.18.1.1.10
This variable represents the index for the appnFrSvc tables.
OBJECT-TYPE    
  NonReplicated  

appnFrSvcBanTable 1.3.6.1.4.1.562.2.4.1.110.18.10
This group contains the BAN device MAC and SAP parameters for the APPN service Frame Relay SVC calls.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnFrSvcBanEntry

appnFrSvcBanEntry 1.3.6.1.4.1.562.2.4.1.110.18.10.1
An entry in the appnFrSvcBanTable.
OBJECT-TYPE    
  AppnFrSvcBanEntry  

appnFrSvcBanLocalMac 1.3.6.1.4.1.562.2.4.1.110.18.10.1.1
This attribute specifies the MAC address to be used for Frame Relay SVCs with BAN encapsulation.
OBJECT-TYPE    
  DashedHexString SIZE(6)  

appnFrSvcBanLocalSap 1.3.6.1.4.1.562.2.4.1.110.18.10.1.2
This attribute specifies the local SAP number to be used for Frame Relay SVCs with BAN encapsulation.
OBJECT-TYPE    
  Hex 4 | 8 | 12 | 16 | 20 | 24 | 28 | 32 | 36 | 40 | 44 | 48 | 52 | 56 | 60 | 64 | 68 | 72 | 76 | 80 | 84 | 88 | 92 | 96 | 100 | 104 | 108 | 112 | 116 | 120 | 124 | 128 | 132 | 136 | 140 | 144 | 148 | 152 | 156 | 160 | 164 | 168 | 172 | 176 | 180 | 184 | 188 | 192 | 196 | 200 | 204 | 208 | 212 | 216 | 220 | 224 | 228 | 232 | 236 | 240 | 244 | 248 | 252  

appnFrSvcProvisionedTable 1.3.6.1.4.1.562.2.4.1.110.18.11
This group contains the provisonable parameters for the APPN service Frame Relay SVC calls.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnFrSvcProvisionedEntry

appnFrSvcProvisionedEntry 1.3.6.1.4.1.562.2.4.1.110.18.11.1
An entry in the appnFrSvcProvisionedTable.
OBJECT-TYPE    
  AppnFrSvcProvisionedEntry  

appnFrSvcMaximumFrameRelaySvcs 1.3.6.1.4.1.562.2.4.1.110.18.11.1.1
This attribute specifies the maximum number of concurrently active Frame Relay SVC calls that are allowed for this service. This attribute does not include the general switched virtual circuits (GSVC).
OBJECT-TYPE    
  Unsigned32 1..3072  

appnFrSvcRateEnforcement 1.3.6.1.4.1.562.2.4.1.110.18.11.1.2
This attribute specifies whether rate enforcement is to be used for new Frame Relay SVCs on this service. When rate enforcement is on the rate of data sent by the service to individual Frame Relay SVCs is controlled.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

appnFrSvcMaximumCir 1.3.6.1.4.1.562.2.4.1.110.18.11.1.4
This attribute specifies the maximum rate enforcement CIR (Committed Information Rate) that is allowed for use with the Frame Relay SVCs on this service. During call setup negotiation, if the caller to this service requests a higher CIR value be used, the CIR used is reduced to the value of maximumCir.
OBJECT-TYPE    
  Unsigned32 0..52000000  

appnFrSvcOperationalTable 1.3.6.1.4.1.562.2.4.1.110.18.12
This group contains the operational attributes for the APPN Frame Relay SVC calls.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnFrSvcOperationalEntry

appnFrSvcOperationalEntry 1.3.6.1.4.1.562.2.4.1.110.18.12.1
An entry in the appnFrSvcOperationalTable.
OBJECT-TYPE    
  AppnFrSvcOperationalEntry  

appnFrSvcCurrentNumberOfSvcCalls 1.3.6.1.4.1.562.2.4.1.110.18.12.1.1
This attribute indicates the number of Frame Relay SVCs currently existing on this service. This attribute does not include the general switched virtual circuits (GSVC).
OBJECT-TYPE    
  Gauge32 0..3072  

appnCn 1.3.6.1.4.1.562.2.4.1.110.19
OBJECT IDENTIFIER    

appnCnRowStatusTable 1.3.6.1.4.1.562.2.4.1.110.19.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of appnCn components.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnCnRowStatusEntry

appnCnRowStatusEntry 1.3.6.1.4.1.562.2.4.1.110.19.1.1
A single entry in the table represents a single appnCn component.
OBJECT-TYPE    
  AppnCnRowStatusEntry  

appnCnRowStatus 1.3.6.1.4.1.562.2.4.1.110.19.1.1.1
This variable is used as the basis for SNMP naming of appnCn components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

appnCnComponentName 1.3.6.1.4.1.562.2.4.1.110.19.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

appnCnStorageType 1.3.6.1.4.1.562.2.4.1.110.19.1.1.4
This variable represents the storage type value for the appnCn tables.
OBJECT-TYPE    
  StorageType  

appnCnIndex 1.3.6.1.4.1.562.2.4.1.110.19.1.1.10
This variable represents the index for the appnCn tables.
OBJECT-TYPE    
  AsciiStringIndex SIZE(1..17)  

appnCnOperTable 1.3.6.1.4.1.562.2.4.1.110.19.5
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes for this ConnectionNetwork component.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnCnOperEntry

appnCnOperEntry 1.3.6.1.4.1.562.2.4.1.110.19.5.1
An entry in the appnCnOperTable.
OBJECT-TYPE    
  AppnCnOperEntry  

appnCnNumberActivePorts 1.3.6.1.4.1.562.2.4.1.110.19.5.1.219
This attribute specifies the number of active ports under this ConnectionNetwork.
OBJECT-TYPE    
  Gauge32 0..32767  

appnProcessParmsTable 1.3.6.1.4.1.562.2.4.1.110.100
This group contains attributes of the SNA service which are required for operation within the Passport environment.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnProcessParmsEntry

appnProcessParmsEntry 1.3.6.1.4.1.562.2.4.1.110.100.1
An entry in the appnProcessParmsTable.
OBJECT-TYPE    
  AppnProcessParmsEntry  

appnLogicalProcessor 1.3.6.1.4.1.562.2.4.1.110.100.1.1
This attribute specifies the logical processor on which the Appn component will utilize memory and CPU resources.
OBJECT-TYPE    
  Link  

appnMaximumSvcs 1.3.6.1.4.1.562.2.4.1.110.100.1.22
This attribute specifies the total number of general switched virtual circuits (GSVC) that can be active on this Appn node. Once this number is reached no GSVC calls will be accepted by the service. This attribute does not include the Frame Relay switched virtual circuits.
OBJECT-TYPE    
  Unsigned32 1..4096  

appnMaximumLinkStations 1.3.6.1.4.1.562.2.4.1.110.100.1.23
This attribute specifies the total number of link stations for GSVCs, Frame Relay PVCs and SVCs that can be active on this Appn node. Once the value of activeLinkStations reaches or exceeds the value of maximumLinkStations, no new incoming SVC calls (GSVCs and Frame Relay SVCs) will be accepted by the service until the value of activeLinkStations is again below the value of maximumLinkStations. Outgoing GSVCs and Frame Relay PVCs (incoming or outgoing) are provisioned and their call setups at this end are not affected when the value of activeLinkStations reaches or exceeds the value of maximumLinkStations. Link stations are dynamically created for the end user applications as required. Therefore the value of activeLinkStations may exceed the value of maximumLinkStations.
OBJECT-TYPE    
  Unsigned32 1..4096  

appnControlPointCreateParmsTable 1.3.6.1.4.1.562.2.4.1.110.101
Parameters required to define the behavior of the SNA node.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnControlPointCreateParmsEntry

appnControlPointCreateParmsEntry 1.3.6.1.4.1.562.2.4.1.110.101.1
An entry in the appnControlPointCreateParmsTable.
OBJECT-TYPE    
  AppnControlPointCreateParmsEntry  

appnFqCpName 1.3.6.1.4.1.562.2.4.1.110.101.1.1
The network qualified control point (CP) name. This is the name by which the node is identified within the APPN network. It is signalled on the XID 3 exchange and is the end-point of CP-CP sessions established with this node. The first portion of this name, up to the period, is the network identifier for the network to which this node belongs. An APPN network is a portion of a virtual private network which has a separately administered name space. This network identifier is the implicit qualifier of all resources which do not have an explicit network identifier.
OBJECT-TYPE    
  AsciiString SIZE(3..17)  

appnBlockNumber 1.3.6.1.4.1.562.2.4.1.110.101.1.3
The block number identifies the product of the node. It is the first three hexadecimal digits of the SNA node id.
OBJECT-TYPE    
  Hex 0..4095  

appnIdNumber 1.3.6.1.4.1.562.2.4.1.110.101.1.4
The idNumber is used to identify the local SNA node. It is the last five hexadecimal digits of the SNA node id and is administratively defined. The idNumber will be combined with the three hexadecimal digit block number to form the SNA node id. The SNA node id is included in APPN alerts and in XIDs. A unique value is required for connections to SNA.
OBJECT-TYPE    
  Hex 0..1048575  

appnRouteAdditionResistance 1.3.6.1.4.1.562.2.4.1.110.101.1.5
Route addition resistance is a value that indicates the relative desirability of using this node for intermediate session traffic.The value, which can be any integer 0-255, is used in route computation. The lower the value, the more desirable the node is for intermediate routing.
OBJECT-TYPE    
  Unsigned32 0..255  

appnFeatures 1.3.6.1.4.1.562.2.4.1.110.101.1.6
This attribute supports several YES/NO flags which are defined in the create parameters: multipleDomainSupport If present, specifies that Management Services (MS) supports Multiple Domain Support (MDS) and MS capabilities exchange. registerWithCDS If present, for a network node this specifies whether local and domain resources may be registered with a central directory server. storeEndptRscvs If present, specifies that route selection control vectors (RSCV) should be stored for diagnostic purposes on sessions which terminate in this node. Note that selecting this value means that an RSCV will be stored for each ISR session. This extra storage can be up to 256 bytes per session. storeIsrRscvs If present, specifies that route selection control vectors (RSCV) should be stored for diagnostic purposes on intermediate session routing (ISR) sessions. Note that selecting this value means that an RSCV will be stored for each ISR session. This extra storage can be up to 256 bytes per session. Description of bits: multipleDomainSupport(0) registerWithCDS(1) storeEndptRscvs(2) storeIsrRscvs(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

appnMaximumLocates 1.3.6.1.4.1.562.2.4.1.110.101.1.7
This attribute represents the maximum number of locate requests the node can handle simultaneously. Attribute locateTimeout should be set to ensure that locate requests can timeout, thereby freeing up node resources.
OBJECT-TYPE    
  Unsigned32 0..65535  

appnMaximumDirectorySize 1.3.6.1.4.1.562.2.4.1.110.101.1.8
This attribute contains the maximum number of SnaDirectoryEntry components that can be defined or learned by this node. A value of zero means unlimited.
OBJECT-TYPE    
  Unsigned32 0..65535  

appnMdsTxAlertQueueSize 1.3.6.1.4.1.562.2.4.1.110.101.1.9
This is the size of Multiple Domain Support send alert queue. When the limit is reached, the MDS component deletes the oldest entry in the queue.
OBJECT-TYPE    
  Unsigned32 0..65535  

appnTreeCacheSize 1.3.6.1.4.1.562.2.4.1.110.101.1.10
This is the topology database routing tree cache size.
OBJECT-TYPE    
  Unsigned32 8..65535  

appnTreeCacheUseLimit 1.3.6.1.4.1.562.2.4.1.110.101.1.11
This is the number of times a cached tree can be reused. Once this number is exceeded, the tree is discarded and recomputed. This allows the node to balance sessions among equal weight routes. A low value provides better load balancing at the expense of increased activation latency. The minimum is 1.
OBJECT-TYPE    
  Unsigned32 1..65535  

appnMaximumTopologyNodes 1.3.6.1.4.1.562.2.4.1.110.101.1.12
This is the maximum number of Appn network nodes that can be stored in the Topology Database (zero means unlimited).
OBJECT-TYPE    
  Unsigned32 0..65535  

appnMaximumTopologyTgs 1.3.6.1.4.1.562.2.4.1.110.101.1.13
This is the maximum number of Transmission Groups that can be stored in the Topology Database (zero means unlimited).
OBJECT-TYPE    
  Unsigned32 0..65535  

appnMaximumIsrSessions 1.3.6.1.4.1.562.2.4.1.110.101.1.14
This attribute represents the maximum number of ISR sessions this node can participate in at once. The minimum value is 100.
OBJECT-TYPE    
  Unsigned32 100..65535  

appnIsrUpperCongestionThreshold 1.3.6.1.4.1.562.2.4.1.110.101.1.15
This is the upper threshold for ISR sessions. This attribute and the following one control the node's ISR congestion status. The node state changes from uncongested to congested if the number of ISR sessions exceeds the upper threshold. The node state changes back to uncongested once the number of ISR sessions dips below the lower threshold. To prevent thrashing, the lower threshold should be less than the upper threshold. The upper threshold should be lower than maximumIsrSessions.
OBJECT-TYPE    
  Unsigned32 0..65535  

appnIsrLowerCongestionThreshold 1.3.6.1.4.1.562.2.4.1.110.101.1.16
This is the lower threshold for the ISR session congestion algorithm. This value should be less than isrUpperCongestionThreshold.
OBJECT-TYPE    
  Unsigned32 0..65535  

appnIsrMaxRuSize 1.3.6.1.4.1.562.2.4.1.110.101.1.17
Maximum request unit (RU) size supported for intermediate routing (ISR) sessions.
OBJECT-TYPE    
  Unsigned32 0..65535  

appnIsrRxPacingWindow 1.3.6.1.4.1.562.2.4.1.110.101.1.18
This is the suggested receive pacing window size for intermediate sessions. This value is only used on the secondary hop of intermediate sessions if the adjacent node does not support adaptive pacing. A value of zero means that no pacing will occur.
OBJECT-TYPE    
  Unsigned32 0..32767  

appnLocateTimeout 1.3.6.1.4.1.562.2.4.1.110.101.1.19
This attribute specifies the time in seconds before a network search will time-out. A value of zero indicates that the search has no time limit.
OBJECT-TYPE    
  Unsigned32 0..65535  

appnHprSupport 1.3.6.1.4.1.562.2.4.1.110.101.1.20
This attribute specifies the type of High Performance Routing (HPR) that is to be used on this node. The options are: none - the node does not support HPR, anrOnly - the node only supports Automatic Network Routing (ANR), or rtp - the node supports Rapid Transport Protocol as an end point. The default value of rtp ensures that the node can Aping other nodes via a HPR pipe, this option is also required to allow dependent LU sessions teminating on this node to use HPR and for the node to act as a boundary node between ISR only nodes and the HPR capable portion of the network. With this option, the node can work with non-HPR capable nodes.
OBJECT-TYPE    
  INTEGER none(0), anrOnly(1), rtp(2)  

appnDlurSupport 1.3.6.1.4.1.562.2.4.1.110.101.1.21
This attribute specifies whether or not this node supports dependent logical unit requestor (DLUR). By default, DLUR is not supported. If this attribute is set to yes, ensure that the Dlur subcomponent is provisioned with appropriate values, if this attribute is set to no, the Dlur subcomponent is not used and is ignored if present.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

appnStateTable 1.3.6.1.4.1.562.2.4.1.110.102
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnStateEntry

appnStateEntry 1.3.6.1.4.1.562.2.4.1.110.102.1
An entry in the appnStateTable.
OBJECT-TYPE    
  AppnStateEntry  

appnAdminState 1.3.6.1.4.1.562.2.4.1.110.102.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

appnOperationalState 1.3.6.1.4.1.562.2.4.1.110.102.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

appnUsageState 1.3.6.1.4.1.562.2.4.1.110.102.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

appnOperationalTable 1.3.6.1.4.1.562.2.4.1.110.103
This group contains the node operational characteristics.
OBJECT-TYPE    
  SEQUENCE OF  
    AppnOperationalEntry

appnOperationalEntry 1.3.6.1.4.1.562.2.4.1.110.103.1
An entry in the appnOperationalTable.
OBJECT-TYPE    
  AppnOperationalEntry  

appnUpTime 1.3.6.1.4.1.562.2.4.1.110.103.1.1
This attribute represents the time in hundredths of a second since the node was started or restarted.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

appnHeapSpaceLimit 1.3.6.1.4.1.562.2.4.1.110.103.1.2
This attribute represents the size of the heap in bytes, as obtained by storage management from the underlying operating system.
OBJECT-TYPE    
  Gauge32 0..4294967295  

appnHeapSpaceCurrent 1.3.6.1.4.1.562.2.4.1.110.103.1.3
This attribute contains the number of bytes in the memory segment that are currently allocated to the processes associated with the Appn component. SNMP APPN MIB = ibmappnMemoryUsed
OBJECT-TYPE    
  Gauge32 0..4294967295  

appnMemWarningThreshold 1.3.6.1.4.1.562.2.4.1.110.103.1.4
This attribute contains the memory allocation threshold beyond which storage management considers the storage resources to be constrained. This is calculated as a fraction of heapSpaceLimit. The value returned now is always zero until the functionality is supported in future release. SNMP APPN MIB = ibmappnMemoryWarnThresh
OBJECT-TYPE    
  Unsigned32 0..4294967295  

appnMemCriticalThreshold 1.3.6.1.4.1.562.2.4.1.110.103.1.5
This attribute represents the memory allocation threshold beyond which storage management considers the storage resources to be critically constrained. The value is calculated as a fraction of heapSpaceLimit. The value returned now is always zero until the functionality is supported in future release.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

appnNnFunctionsSupported 1.3.6.1.4.1.562.2.4.1.110.103.1.6
The network node functions supported may include any of the following: receiveRegistration - If present, indicates that this node supports receiving registered characteristics on a GDS frame. This function is not supported in the current release. gateway - If present, indicates that this is a gateway node. centralDirectoryServer - If present, indicates that this node supports central directory server cache. treeCaching -If present, indicates that this node supports route tree cache. treeUpdates - If present, indicates that this node supports incremental tree update, which is only supported when tree caching is supported. intermediateSessionRouting - Indicates that the node supports intermediate session routing. Description of bits: receiveRegistration(0) gateway(1) centralDirectoryServer(2) treeCaching(3) treeUpdates(4) intermediateSessionRouting(5)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

appnGeneralFunctionsSupported 1.3.6.1.4.1.562.2.4.1.110.103.1.7
The general functions supported may include any of the following: negotiableLs -If present, indicates that this node supports negotiable link stations. segmentReassembly -If present, indicates whether this node supports segment reassembly. This is only supported when segment generation is also supported. bindReassembly -If present, indicates whether this node supports Bind segment reassembly. This will only be supported when Bind segment generation is also supported. parallelTgs -If present, indicates whether this node supports parallel TGs. callIn - If present, indicates whether this node allows call-in from nodes not defined locally. adaptivePacing - If present, indicates whether this node supports adaptive bind pacing. Description of bits: negotiableLs(0) segmentReassembly(1) bindReassembly(2) parallelTgs(3) callIn(4) adaptivePacing(5)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

appnStatus 1.3.6.1.4.1.562.2.4.1.110.103.1.8
This attribute contains the status of the node. This may be nodeUncongested or one or more of the following: isrCongested The number of ISR sessions is greater than specified by the isrSessionsUpperThreshold attribute. This node is not be included in route selection by other nodes when this congestion exists. endPtDepleted The number of end-point sessions has reached the maximum specified. isrDepleted The number of ISR sessions has reached the maximum specified by the maximumIsrSessions attribute. This node is not included in intermediate route selection by other nodes when resources are depleted. quiescing Indicates whether the node is quiescing. This node is not included in route selection by other nodes when the node is quiescing. Description of bits: nodeUncongested(0) notused1(1) quiescing(2) notused3(3) notused4(4) endPtDepleted(5) isrDepleted(6) isrCongested(7)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

appnFlowReductionSequenceNumber 1.3.6.1.4.1.562.2.4.1.110.103.1.9
Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This object is the last FRSN sent in a topology update the adjacent network nodes. SNMP APPN MIB = ibmappnNodeNnFrsn
OBJECT-TYPE    
  Unsigned32 0..4294967295  

appnResourceSequenceNumber 1.3.6.1.4.1.562.2.4.1.110.103.1.10
Resource sequence number of this Appn network node.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

appnDefinedLsGoodXids 1.3.6.1.4.1.562.2.4.1.110.103.1.11
This attribute represents the total number of successful XIDs that have been received on all defined link stations since the last time this node was initialized. When the upper limit is reached, the number wraps around to 0.
OBJECT-TYPE    
  PassportCounter64  

appnDefinedLsBadXids 1.3.6.1.4.1.562.2.4.1.110.103.1.12
This attribute represents the total number of unsuccessful XIDs that have been received on all defined link stations since the last time this node was initialized. When the upper limit is reached, the number wraps around to 0.
OBJECT-TYPE    
  PassportCounter64  

appnDynamicLsGoodXids 1.3.6.1.4.1.562.2.4.1.110.103.1.13
This attribute represents the total number of successful XIDs that have been received on all dynamic link stations since the last time this node was initialized. When the upper limit is reached, the number wraps around to 0.
OBJECT-TYPE    
  PassportCounter64  

appnDynamicLsBadXids 1.3.6.1.4.1.562.2.4.1.110.103.1.14
This attribute represents the total number of unsuccessful XIDs that have been received on all dynamic link stations since the last time this node was initialized. When the upper limit is reached, the number wraps around to 0.
OBJECT-TYPE    
  PassportCounter64  

appnActiveSvcs 1.3.6.1.4.1.562.2.4.1.110.103.1.15
This attribute indicates the number of general switched virtual circuits (GSVC) on this Appn node at the time of the query. This attribute does not include the Frame Relay switched virtual circuits.
OBJECT-TYPE    
  Unsigned32 0..4096  

appnActiveLinkStations 1.3.6.1.4.1.562.2.4.1.110.103.1.16
This attribute indicates the number of link stations (for GSVCs, Frame Relay PVCs and SVCs) on the Appn node at the time of the query.
OBJECT-TYPE    
  Unsigned32 0..4096  

appnMIB 1.3.6.1.4.1.562.2.4.2.29
OBJECT IDENTIFIER    

appnGroup 1.3.6.1.4.1.562.2.4.2.29.1
OBJECT IDENTIFIER    

appnGroupBE 1.3.6.1.4.1.562.2.4.2.29.1.5
OBJECT IDENTIFIER    

appnGroupBE01 1.3.6.1.4.1.562.2.4.2.29.1.5.2
OBJECT IDENTIFIER    

appnGroupBE01A 1.3.6.1.4.1.562.2.4.2.29.1.5.2.2
OBJECT IDENTIFIER    

appnCapabilities 1.3.6.1.4.1.562.2.4.2.29.3
OBJECT IDENTIFIER    

appnCapabilitiesBE 1.3.6.1.4.1.562.2.4.2.29.3.5
OBJECT IDENTIFIER    

appnCapabilitiesBE01 1.3.6.1.4.1.562.2.4.2.29.3.5.2
OBJECT IDENTIFIER    

appnCapabilitiesBE01A 1.3.6.1.4.1.562.2.4.2.29.3.5.2.2
OBJECT IDENTIFIER    

Defined Objects

AppnRowStatusEntry  
SEQUENCE    
  RowStatus as appnRowStatus  
  DisplayString as appnComponentName  
  StorageType as appnStorageType  
  AsciiStringIndex as appnIndex  

AppnProcessParmsEntry  
SEQUENCE    
  Link as appnLogicalProcessor  
  Unsigned32 as appnMaximumSvcs  
  Unsigned32 as appnMaximumLinkStations  

AppnControlPointCreateParmsEntry  
SEQUENCE    
  AsciiString as appnFqCpName  
  Hex as appnBlockNumber  
  Hex as appnIdNumber  
  Unsigned32 as appnRouteAdditionResistance  
  OCTET STRING as appnFeatures  
  Unsigned32 as appnMaximumLocates  
  Unsigned32 as appnMaximumDirectorySize  
  Unsigned32 as appnMdsTxAlertQueueSize  
  Unsigned32 as appnTreeCacheSize  
  Unsigned32 as appnTreeCacheUseLimit  
  Unsigned32 as appnMaximumTopologyNodes  
  Unsigned32 as appnMaximumTopologyTgs  
  Unsigned32 as appnMaximumIsrSessions  
  Unsigned32 as appnIsrUpperCongestionThreshold  
  Unsigned32 as appnIsrLowerCongestionThreshold  
  Unsigned32 as appnIsrMaxRuSize  
  Unsigned32 as appnIsrRxPacingWindow  
  Unsigned32 as appnLocateTimeout  
  INTEGER as appnHprSupport  
  INTEGER as appnDlurSupport  

AppnStateEntry  
SEQUENCE    
  INTEGER as appnAdminState  
  INTEGER as appnOperationalState  
  INTEGER as appnUsageState  

AppnOperationalEntry  
SEQUENCE    
  Unsigned32 as appnUpTime  
  Gauge32 as appnHeapSpaceLimit  
  Gauge32 as appnHeapSpaceCurrent  
  Unsigned32 as appnMemWarningThreshold  
  Unsigned32 as appnMemCriticalThreshold  
  OCTET STRING as appnNnFunctionsSupported  
  OCTET STRING as appnGeneralFunctionsSupported  
  OCTET STRING as appnStatus  
  Unsigned32 as appnFlowReductionSequenceNumber  
  Unsigned32 as appnResourceSequenceNumber  
  PassportCounter64 as appnDefinedLsGoodXids  
  PassportCounter64 as appnDefinedLsBadXids  
  PassportCounter64 as appnDynamicLsGoodXids  
  PassportCounter64 as appnDynamicLsBadXids  
  Unsigned32 as appnActiveSvcs  
  Unsigned32 as appnActiveLinkStations  

AppnDnaRowStatusEntry  
SEQUENCE    
  RowStatus as appnDnaRowStatus  
  DisplayString as appnDnaComponentName  
  StorageType as appnDnaStorageType  
  NonReplicated as appnDnaIndex  

AppnDnaAddressEntry  
SEQUENCE    
  INTEGER as appnDnaNumberingPlanIndicator  
  DigitString as appnDnaDataNetworkAddress  

AppnDnaOutgoingOptionsEntry  
SEQUENCE    
  INTEGER as appnDnaOutDefaultPriority  
  INTEGER as appnDnaOutDefaultPathSensitivity  
  INTEGER as appnDnaOutPathSensitivityOverRide  
  INTEGER as appnDnaOutDefaultPathReliability  
  INTEGER as appnDnaOutAccess  
  INTEGER as appnDnaDefaultTransferPriority  
  INTEGER as appnDnaTransferPriorityOverRide  

AppnDnaIncomingOptionsEntry  
SEQUENCE    
  INTEGER as appnDnaIncAccess  

AppnDnaCallOptionsEntry  
SEQUENCE    
  Unsigned32 as appnDnaDefaultRecvFrmNetworkThruputClass  
  Unsigned32 as appnDnaDefaultSendToNetworkThruputClass  
  Unsigned32 as appnDnaDefaultRecvFrmNetworkWindowSize  
  Unsigned32 as appnDnaDefaultSendToNetworkWindowSize  
  Unsigned32 as appnDnaAccountClass  
  OCTET STRING as appnDnaAccountCollection  
  Unsigned32 as appnDnaServiceExchange  

AppnDnaHgMRowStatusEntry  
SEQUENCE    
  RowStatus as appnDnaHgMRowStatus  
  DisplayString as appnDnaHgMComponentName  
  StorageType as appnDnaHgMStorageType  
  NonReplicated as appnDnaHgMIndex  

AppnDnaHgMIfEntry  
SEQUENCE    
  Unsigned32 as appnDnaHgMAvailabilityUpdateThreshold  

AppnDnaHgMOpEntry  
SEQUENCE    
  Unsigned32 as appnDnaHgMMaxAvailableChannels  
  Unsigned32 as appnDnaHgMAvailableChannels  
  INTEGER as appnDnaHgMAvailabilityDelta  

AppnDnaHgMHgAddrRowStatusEntry  
SEQUENCE    
  RowStatus as appnDnaHgMHgAddrRowStatus  
  DisplayString as appnDnaHgMHgAddrComponentName  
  StorageType as appnDnaHgMHgAddrStorageType  
  Integer32 as appnDnaHgMHgAddrIndex  

AppnDnaHgMHgAddrAddrEntry  
SEQUENCE    
  INTEGER as appnDnaHgMHgAddrNumberingPlanIndicator  
  DigitString as appnDnaHgMHgAddrDataNetworkAddress  

AppnDnaCugRowStatusEntry  
SEQUENCE    
  RowStatus as appnDnaCugRowStatus  
  DisplayString as appnDnaCugComponentName  
  StorageType as appnDnaCugStorageType  
  Integer32 as appnDnaCugIndex  

AppnDnaCugCugOptionsEntry  
SEQUENCE    
  INTEGER as appnDnaCugType  
  DigitString as appnDnaCugDnic  
  Unsigned32 as appnDnaCugInterlockCode  
  INTEGER as appnDnaCugPreferential  
  INTEGER as appnDnaCugOutCalls  
  INTEGER as appnDnaCugIncCalls  
  INTEGER as appnDnaCugPrivileged  

AppnDlciRowStatusEntry  
SEQUENCE    
  RowStatus as appnDlciRowStatus  
  DisplayString as appnDlciComponentName  
  StorageType as appnDlciStorageType  
  Integer32 as appnDlciIndex  

AppnDlciStateEntry  
SEQUENCE    
  INTEGER as appnDlciAdminState  
  INTEGER as appnDlciOperationalState  
  INTEGER as appnDlciUsageState  

AppnDlciSpOpEntry  
SEQUENCE    
  INTEGER as appnDlciRateEnforcement  
  Gauge32 as appnDlciCommittedInformationRate  
  Gauge32 as appnDlciCommittedBurstSize  
  Gauge32 as appnDlciExcessInformationRate  
  Gauge32 as appnDlciExcessBurstSize  
  Gauge32 as appnDlciMeasurementInterval  

AppnDlciDcRowStatusEntry  
SEQUENCE    
  RowStatus as appnDlciDcRowStatus  
  DisplayString as appnDlciDcComponentName  
  StorageType as appnDlciDcStorageType  
  NonReplicated as appnDlciDcIndex  

AppnDlciDcOptionsEntry  
SEQUENCE    
  INTEGER as appnDlciDcRemoteNpi  
  DigitString as appnDlciDcRemoteDna  
  Unsigned32 as appnDlciDcRemoteDlci  
  INTEGER as appnDlciDcType  
  INTEGER as appnDlciDcTransferPriority  
  INTEGER as appnDlciDcDiscardPriority  

AppnDlciDcNfaEntry  
SEQUENCE    
  Integer32 as appnDlciDcNfaIndex  
  HexString as appnDlciDcNfaValue  
  RowStatus as appnDlciDcNfaRowStatus  

AppnDlciVcRowStatusEntry  
SEQUENCE    
  RowStatus as appnDlciVcRowStatus  
  DisplayString as appnDlciVcComponentName  
  StorageType as appnDlciVcStorageType  
  NonReplicated as appnDlciVcIndex  

AppnDlciVcCadEntry  
SEQUENCE    
  INTEGER as appnDlciVcType  
  INTEGER as appnDlciVcState  
  INTEGER as appnDlciVcPreviousState  
  Unsigned32 as appnDlciVcDiagnosticCode  
  Unsigned32 as appnDlciVcPreviousDiagnosticCode  
  INTEGER as appnDlciVcCalledNpi  
  DigitString as appnDlciVcCalledDna  
  Unsigned32 as appnDlciVcCalledLcn  
  INTEGER as appnDlciVcCallingNpi  
  DigitString as appnDlciVcCallingDna  
  Unsigned32 as appnDlciVcCallingLcn  
  INTEGER as appnDlciVcAccountingEnabled  
  INTEGER as appnDlciVcFastSelectCall  
  INTEGER as appnDlciVcPathReliability  
  INTEGER as appnDlciVcAccountingEnd  
  INTEGER as appnDlciVcPriority  
  Unsigned32 as appnDlciVcSegmentSize  
  Unsigned32 as appnDlciVcMaxSubnetPktSize  
  INTEGER as appnDlciVcRcosToNetwork  
  INTEGER as appnDlciVcRcosFromNetwork  
  INTEGER as appnDlciVcEmissionPriorityToNetwork  
  INTEGER as appnDlciVcEmissionPriorityFromNetwork  
  AsciiString as appnDlciVcDataPath  

AppnDlciVcIntdEntry  
SEQUENCE    
  Hex as appnDlciVcCallReferenceNumber  
  Unsigned32 as appnDlciVcElapsedTimeTillNow  
  Unsigned32 as appnDlciVcSegmentsRx  
  Unsigned32 as appnDlciVcSegmentsSent  
  EnterpriseDateAndTime as appnDlciVcStartTime  

AppnDlciVcFrdEntry  
SEQUENCE    
  Unsigned32 as appnDlciVcFrmCongestedToSubnet  
  Unsigned32 as appnDlciVcCannotForwardToSubnet  
  Unsigned32 as appnDlciVcNotDataXferToSubnet  
  Unsigned32 as appnDlciVcOutOfRangeFrmFromSubnet  
  Unsigned32 as appnDlciVcCombErrorsFromSubnet  
  Unsigned32 as appnDlciVcDuplicatesFromSubnet  
  Unsigned32 as appnDlciVcNotDataXferFromSubnet  
  Unsigned32 as appnDlciVcFrmLossTimeouts  
  Unsigned32 as appnDlciVcOoSeqByteCntExceeded  
  Unsigned32 as appnDlciVcPeakOoSeqPktCount  
  Unsigned32 as appnDlciVcPeakOoSeqFrmForwarded  
  Unsigned32 as appnDlciVcSendSequenceNumber  
  Unsigned32 as appnDlciVcPktRetryTimeouts  
  Unsigned32 as appnDlciVcPeakRetryQueueSize  
  Unsigned32 as appnDlciVcSubnetRecoveries  
  Unsigned32 as appnDlciVcOoSeqPktCntExceeded  
  Unsigned32 as appnDlciVcPeakOoSeqByteCount  

AppnDlciVcDmepEntry  
SEQUENCE    
  RowPointer as appnDlciVcDmepValue  

AppnDlciBnnLsDefRowStatusEntry  
SEQUENCE    
  RowStatus as appnDlciBnnLsDefRowStatus  
  DisplayString as appnDlciBnnLsDefComponentName  
  StorageType as appnDlciBnnLsDefStorageType  
  Integer32 as appnDlciBnnLsDefIndex  

AppnDlciBnnLsDefProvEntry  
SEQUENCE    
  INTEGER as appnDlciBnnLsDefDspuService  
  AsciiString as appnDlciBnnLsDefAdjacentCpName  
  INTEGER as appnDlciBnnLsDefAdjacentCpType  
  Unsigned32 as appnDlciBnnLsDefTgNum  
  AsciiString as appnDlciBnnLsDefDlusName  
  AsciiString as appnDlciBnnLsDefBackupDlusName  
  INTEGER as appnDlciBnnLsDefHprSupported  
  Hex as appnDlciBnnLsDefAdjacentNodeID  
  INTEGER as appnDlciBnnLsDefCpCpSessionSupport  
  Unsigned32 as appnDlciBnnLsDefMaxTxBtuSize  
  INTEGER as appnDlciBnnLsDefLsRole  

AppnDlciSpRowStatusEntry  
SEQUENCE    
  RowStatus as appnDlciSpRowStatus  
  DisplayString as appnDlciSpComponentName  
  StorageType as appnDlciSpStorageType  
  NonReplicated as appnDlciSpIndex  

AppnDlciSpParmsEntry  
SEQUENCE    
  INTEGER as appnDlciSpRateEnforcement  
  Unsigned32 as appnDlciSpCommittedInformationRate  
  Unsigned32 as appnDlciSpCommittedBurstSize  
  Unsigned32 as appnDlciSpExcessBurstSize  
  Unsigned32 as appnDlciSpMeasurementInterval  

AppnDlciBanLsDefRowStatusEntry  
SEQUENCE    
  RowStatus as appnDlciBanLsDefRowStatus  
  DisplayString as appnDlciBanLsDefComponentName  
  StorageType as appnDlciBanLsDefStorageType  
  DashedHexString as appnDlciBanLsDefMacIndex  
  Integer32 as appnDlciBanLsDefSapIndex  

AppnDlciBanLsDefProvEntry  
SEQUENCE    
  INTEGER as appnDlciBanLsDefDspuService  
  AsciiString as appnDlciBanLsDefAdjacentCpName  
  INTEGER as appnDlciBanLsDefAdjacentCpType  
  Unsigned32 as appnDlciBanLsDefTgNum  
  AsciiString as appnDlciBanLsDefDlusName  
  AsciiString as appnDlciBanLsDefBackupDlusName  
  INTEGER as appnDlciBanLsDefHprSupported  
  Hex as appnDlciBanLsDefAdjacentNodeID  
  INTEGER as appnDlciBanLsDefCpCpSessionSupport  
  Unsigned32 as appnDlciBanLsDefMaxTxBtuSize  
  INTEGER as appnDlciBanLsDefLsRole  

AppnDlciBanRowStatusEntry  
SEQUENCE    
  RowStatus as appnDlciBanRowStatus  
  DisplayString as appnDlciBanComponentName  
  StorageType as appnDlciBanStorageType  
  NonReplicated as appnDlciBanIndex  

AppnDlciBanProvEntry  
SEQUENCE    
  DashedHexString as appnDlciBanLocalMac  
  Hex as appnDlciBanLocalSap  

AppnDlciCnRowStatusEntry  
SEQUENCE    
  RowStatus as appnDlciCnRowStatus  
  DisplayString as appnDlciCnComponentName  
  StorageType as appnDlciCnStorageType  
  AsciiStringIndex as appnDlciCnIndex  

AppnLcnRowStatusEntry  
SEQUENCE    
  RowStatus as appnLcnRowStatus  
  DisplayString as appnLcnComponentName  
  StorageType as appnLcnStorageType  
  Integer32 as appnLcnIndex  

AppnLcnStateEntry  
SEQUENCE    
  INTEGER as appnLcnAdminState  
  INTEGER as appnLcnOperationalState  
  INTEGER as appnLcnUsageState  

AppnLcnDcRowStatusEntry  
SEQUENCE    
  RowStatus as appnLcnDcRowStatus  
  DisplayString as appnLcnDcComponentName  
  StorageType as appnLcnDcStorageType  
  NonReplicated as appnLcnDcIndex  

AppnLcnDcOptionsEntry  
SEQUENCE    
  INTEGER as appnLcnDcRemoteNpi  
  DigitString as appnLcnDcRemoteDna  
  INTEGER as appnLcnDcTransferPriority  
  INTEGER as appnLcnDcDiscardPriority  

AppnLcnVcRowStatusEntry  
SEQUENCE    
  RowStatus as appnLcnVcRowStatus  
  DisplayString as appnLcnVcComponentName  
  StorageType as appnLcnVcStorageType  
  NonReplicated as appnLcnVcIndex  

AppnLcnVcCadEntry  
SEQUENCE    
  INTEGER as appnLcnVcType  
  INTEGER as appnLcnVcState  
  INTEGER as appnLcnVcPreviousState  
  Unsigned32 as appnLcnVcDiagnosticCode  
  Unsigned32 as appnLcnVcPreviousDiagnosticCode  
  INTEGER as appnLcnVcCalledNpi  
  DigitString as appnLcnVcCalledDna  
  Unsigned32 as appnLcnVcCalledLcn  
  INTEGER as appnLcnVcCallingNpi  
  DigitString as appnLcnVcCallingDna  
  Unsigned32 as appnLcnVcCallingLcn  
  INTEGER as appnLcnVcAccountingEnabled  
  INTEGER as appnLcnVcFastSelectCall  
  INTEGER as appnLcnVcLocalRxPktSize  
  INTEGER as appnLcnVcLocalTxPktSize  
  Unsigned32 as appnLcnVcLocalTxWindowSize  
  Unsigned32 as appnLcnVcLocalRxWindowSize  
  INTEGER as appnLcnVcPathReliability  
  INTEGER as appnLcnVcAccountingEnd  
  INTEGER as appnLcnVcPriority  
  Unsigned32 as appnLcnVcSegmentSize  
  INTEGER as appnLcnVcSubnetTxPktSize  
  Unsigned32 as appnLcnVcSubnetTxWindowSize  
  INTEGER as appnLcnVcSubnetRxPktSize  
  Unsigned32 as appnLcnVcSubnetRxWindowSize  
  Unsigned32 as appnLcnVcMaxSubnetPktSize  
  INTEGER as appnLcnVcTransferPriorityToNetwork  
  INTEGER as appnLcnVcTransferPriorityFromNetwork  

AppnLcnVcIntdEntry  
SEQUENCE    
  Hex as appnLcnVcCallReferenceNumber  
  Unsigned32 as appnLcnVcElapsedTimeTillNow  
  Unsigned32 as appnLcnVcSegmentsRx  
  Unsigned32 as appnLcnVcSegmentsSent  
  EnterpriseDateAndTime as appnLcnVcStartTime  

AppnLcnVcStatsEntry  
SEQUENCE    
  Unsigned32 as appnLcnVcAckStackingTimeouts  
  Unsigned32 as appnLcnVcOutOfRangeFrmFromSubnet  
  Unsigned32 as appnLcnVcDuplicatesFromSubnet  
  Unsigned32 as appnLcnVcFrmRetryTimeouts  
  Unsigned32 as appnLcnVcPeakRetryQueueSize  
  Unsigned32 as appnLcnVcPeakOoSeqQueueSize  
  Unsigned32 as appnLcnVcPeakOoSeqFrmForwarded  
  Unsigned32 as appnLcnVcPeakStackedAcksRx  
  Unsigned32 as appnLcnVcSubnetRecoveries  
  Unsigned32 as appnLcnVcWindowClosuresToSubnet  
  Unsigned32 as appnLcnVcWindowClosuresFromSubnet  
  Unsigned32 as appnLcnVcWrTriggers  

AppnPortRowStatusEntry  
SEQUENCE    
  RowStatus as appnPortRowStatus  
  DisplayString as appnPortComponentName  
  StorageType as appnPortStorageType  
  AsciiStringIndex as appnPortIndex  

AppnPortConfigEntry  
SEQUENCE    
  INTEGER as appnPortType  
  Unsigned32 as appnPortMaxRxBtuSize  
  Unsigned32 as appnPortMaxTxBtuSize  
  Unsigned32 as appnPortTotLinkActLim  
  Unsigned32 as appnPortInbLinkActLim  
  Unsigned32 as appnPortOutLinkActLim  
  INTEGER as appnPortLsRole  
  Unsigned32 as appnPortActXidExchLim  
  Unsigned32 as appnPortNonactXidExchLim  
  INTEGER as appnPortLsXmitRxCap  
  Unsigned32 as appnPortMaxIfrmRxWindow  
  Unsigned32 as appnPortTargetPacingCount  

AppnPortOperEntry  
SEQUENCE    
  INTEGER as appnPortState  
  INTEGER as appnPortDlcType  
  INTEGER as appnPortSimRim  
  PassportCounter64 as appnPortDefinedLsGoodXids  
  PassportCounter64 as appnPortDefinedLsBadXids  
  PassportCounter64 as appnPortDynLsGoodXids  
  PassportCounter64 as appnPortDynLsBadXids  

AppnPortTgCharEntry  
SEQUENCE    
  INTEGER as appnPortEffectiveCap  
  INTEGER as appnPortConnectCost  
  INTEGER as appnPortByteCost  
  INTEGER as appnPortSecurity  
  INTEGER as appnPortPropagationDelay  
  Unsigned32 as appnPortUserDefinedParm1  
  Unsigned32 as appnPortUserDefinedParm2  
  Unsigned32 as appnPortUserDefinedParm3  

AppnLsRowStatusEntry  
SEQUENCE    
  RowStatus as appnLsRowStatus  
  DisplayString as appnLsComponentName  
  StorageType as appnLsStorageType  
  AsciiStringIndex as appnLsIndex  

AppnLsLsVcReferenceEntry  
SEQUENCE    
  RowPointer as appnLsName  
  Hex as appnLsSap  

AppnLsConfigEntry  
SEQUENCE    
  AsciiString as appnLsPortName  
  OCTET STRING as appnLsFeatures  
  Unsigned32 as appnLsMaxTxBtuSize  

AppnLsOperEntry  
SEQUENCE    
  INTEGER as appnLsDlcType  
  INTEGER as appnLsLinkStationState  
  INTEGER as appnLsLinkStationSubState  
  Gauge32 as appnLsActSessCount  
  AsciiString as appnLsActualCpName  
  INTEGER as appnLsActualCpType  
  AsciiString as appnLsDlcName  
  INTEGER as appnLsDynamicOrDefined  
  INTEGER as appnLsMigration  
  Unsigned32 as appnLsTgNum  
  INTEGER as appnLsHprSupport  
  Hex as appnLsAnrLabel  

AppnLsTgCharEntry  
SEQUENCE    
  INTEGER as appnLsEffectiveCap  
  INTEGER as appnLsConnectCost  
  INTEGER as appnLsByteCost  
  INTEGER as appnLsSecurity  
  INTEGER as appnLsPropagationDelay  
  Unsigned32 as appnLsUserDefinedParm1  
  Unsigned32 as appnLsUserDefinedParm2  
  Unsigned32 as appnLsUserDefinedParm3  

AppnLsStatsEntry  
SEQUENCE    
  PassportCounter64 as appnLsInXidBytes  
  PassportCounter64 as appnLsInMsgBytes  
  PassportCounter64 as appnLsInXidFrames  
  PassportCounter64 as appnLsInMsgFrames  
  PassportCounter64 as appnLsOutXidBytes  
  PassportCounter64 as appnLsOutMsgBytes  
  PassportCounter64 as appnLsOutXidFrames  
  PassportCounter64 as appnLsOutMsgFrames  
  PassportCounter64 as appnLsInInvalidSnaFrames  
  PassportCounter64 as appnLsInSessionControlFrames  
  PassportCounter64 as appnLsOutSessionControlFrames  
  PassportCounter64 as appnLsEchoResponse  
  PassportCounter64 as appnLsCurrentDelay  
  PassportCounter64 as appnLsMaxDelay  
  PassportCounter64 as appnLsMinDelay  
  PassportCounter64 as appnLsGoodXids  
  PassportCounter64 as appnLsBadXids  

AppnDirEntRowStatusEntry  
SEQUENCE    
  RowStatus as appnDirEntRowStatus  
  DisplayString as appnDirEntComponentName  
  StorageType as appnDirEntStorageType  
  AsciiStringIndex as appnDirEntIndex  

AppnDirEntOperEntry  
SEQUENCE    
  AsciiString as appnDirEntServerName  
  AsciiString as appnDirEntLuOwnerName  
  INTEGER as appnDirEntLocation  
  INTEGER as appnDirEntEntryType  
  INTEGER as appnDirEntWildCard  

AppnAdjNnRowStatusEntry  
SEQUENCE    
  RowStatus as appnAdjNnRowStatus  
  DisplayString as appnAdjNnComponentName  
  StorageType as appnAdjNnStorageType  
  AsciiStringIndex as appnAdjNnIndex  

AppnAdjNnOperEntry  
SEQUENCE    
  INTEGER as appnAdjNnCpCpSessStatus  
  PassportCounter64 as appnAdjNnOutOfSeqTdus  
  Unsigned32 as appnAdjNnLastFrsnSent  
  Unsigned32 as appnAdjNnLastFrsnReceived  

AppnNnRowStatusEntry  
SEQUENCE    
  RowStatus as appnNnRowStatus  
  DisplayString as appnNnComponentName  
  StorageType as appnNnStorageType  
  AsciiStringIndex as appnNnIndex  

AppnNnOperEntry  
SEQUENCE    
  Unsigned32 as appnNnDaysLeft  
  INTEGER as appnNnNodeType  
  Unsigned32 as appnNnResourceSequenceNumber  
  INTEGER as appnNnRouteAdditionResistance  
  OCTET STRING as appnNnStatus  
  OCTET STRING as appnNnFunctionSupported  

AppnLocTgRowStatusEntry  
SEQUENCE    
  RowStatus as appnLocTgRowStatus  
  DisplayString as appnLocTgComponentName  
  StorageType as appnLocTgStorageType  
  AsciiStringIndex as appnLocTgDestFqcpNameIndex  
  Integer32 as appnLocTgTransmissionGroupIndex  

AppnLocTgOperEntry  
SEQUENCE    
  OCTET STRING as appnLocTgStatus  
  Unsigned32 as appnLocTgResourceSequenceNumber  

AppnLocTgLinkAddressEntry  
SEQUENCE    
  HexString as appnLocTgDlcData  

AppnLocTgTgCharEntry  
SEQUENCE    
  INTEGER as appnLocTgEffectiveCap  
  INTEGER as appnLocTgConnectCost  
  INTEGER as appnLocTgByteCost  
  INTEGER as appnLocTgSecurity  
  INTEGER as appnLocTgPropagationDelay  
  Unsigned32 as appnLocTgUserDefinedParm1  
  Unsigned32 as appnLocTgUserDefinedParm2  
  Unsigned32 as appnLocTgUserDefinedParm3  

AppnIsrSessRowStatusEntry  
SEQUENCE    
  RowStatus as appnIsrSessRowStatus  
  DisplayString as appnIsrSessComponentName  
  StorageType as appnIsrSessStorageType  
  AsciiStringIndex as appnIsrSessFqcpNameIndex  
  HexString as appnIsrSessProcedureCorrelationIdIndex  

AppnIsrSessOperEntry  
SEQUENCE    
  INTEGER as appnIsrSessTransmissionPriority  
  AsciiString as appnIsrSessCosName  
  INTEGER as appnIsrSessLimitedResource  

AppnIsrSessPriStatsRowStatusEntry  
SEQUENCE    
  RowStatus as appnIsrSessPriStatsRowStatus  
  DisplayString as appnIsrSessPriStatsComponentName  
  StorageType as appnIsrSessPriStatsStorageType  
  NonReplicated as appnIsrSessPriStatsIndex  

AppnIsrSessPriStatsStatsEntry  
SEQUENCE    
  Unsigned32 as appnIsrSessPriStatsRxRuSize  
  Unsigned32 as appnIsrSessPriStatsMaxTxBtuSize  
  Unsigned32 as appnIsrSessPriStatsMaxRxBtuSize  
  INTEGER as appnIsrSessPriStatsMaxTxPacWin  
  INTEGER as appnIsrSessPriStatsCurTxPacWin  
  INTEGER as appnIsrSessPriStatsMaxRxPacWin  
  INTEGER as appnIsrSessPriStatsCurRxPacWin  
  PassportCounter64 as appnIsrSessPriStatsTxDataframes  
  PassportCounter64 as appnIsrSessPriStatsTxFmdFrames  
  PassportCounter64 as appnIsrSessPriStatsTxDataBytes  
  PassportCounter64 as appnIsrSessPriStatsRxDataFrames  
  PassportCounter64 as appnIsrSessPriStatsRxFmdFrames  
  PassportCounter64 as appnIsrSessPriStatsRxDataBytes  
  Hex as appnIsrSessPriStatsSidh  
  Hex as appnIsrSessPriStatsSidl  
  INTEGER as appnIsrSessPriStatsOdai  
  AsciiString as appnIsrSessPriStatsLsName  

AppnIsrSessSecStatsRowStatusEntry  
SEQUENCE    
  RowStatus as appnIsrSessSecStatsRowStatus  
  DisplayString as appnIsrSessSecStatsComponentName  
  StorageType as appnIsrSessSecStatsStorageType  
  NonReplicated as appnIsrSessSecStatsIndex  

AppnIsrSessSecStatsStatsEntry  
SEQUENCE    
  Unsigned32 as appnIsrSessSecStatsRxRuSize  
  Unsigned32 as appnIsrSessSecStatsMaxTxBtuSize  
  Unsigned32 as appnIsrSessSecStatsMaxRxBtuSize  
  INTEGER as appnIsrSessSecStatsMaxTxPacWin  
  INTEGER as appnIsrSessSecStatsCurTxPacWin  
  INTEGER as appnIsrSessSecStatsMaxRxPacWin  
  INTEGER as appnIsrSessSecStatsCurRxPacWin  
  PassportCounter64 as appnIsrSessSecStatsTxDataframes  
  PassportCounter64 as appnIsrSessSecStatsTxFmdFrames  
  PassportCounter64 as appnIsrSessSecStatsTxDataBytes  
  PassportCounter64 as appnIsrSessSecStatsRxDataFrames  
  PassportCounter64 as appnIsrSessSecStatsRxFmdFrames  
  PassportCounter64 as appnIsrSessSecStatsRxDataBytes  
  Hex as appnIsrSessSecStatsSidh  
  Hex as appnIsrSessSecStatsSidl  
  INTEGER as appnIsrSessSecStatsOdai  
  AsciiString as appnIsrSessSecStatsLsName  

AppnNnTgRowStatusEntry  
SEQUENCE    
  RowStatus as appnNnTgRowStatus  
  DisplayString as appnNnTgComponentName  
  StorageType as appnNnTgStorageType  
  AsciiStringIndex as appnNnTgOwnerFqcpNameIndex  
  AsciiStringIndex as appnNnTgDestFqcpNameIndex  
  Integer32 as appnNnTgTransmissionGroupIndex  

AppnNnTgOperEntry  
SEQUENCE    
  Unsigned32 as appnNnTgFlowReductionSequenceNumber  
  Unsigned32 as appnNnTgDaysLeft  
  Unsigned32 as appnNnTgResourceSequenceNumber  
  OCTET STRING as appnNnTgStatus  

AppnNnTgLinkAddressEntry  
SEQUENCE    
  HexString as appnNnTgDlcData  

AppnNnTgTgCharEntry  
SEQUENCE    
  INTEGER as appnNnTgEffectiveCap  
  INTEGER as appnNnTgConnectCost  
  INTEGER as appnNnTgByteCost  
  INTEGER as appnNnTgSecurity  
  INTEGER as appnNnTgPropagationDelay  
  Unsigned32 as appnNnTgUserDefinedParm1  
  Unsigned32 as appnNnTgUserDefinedParm2  
  Unsigned32 as appnNnTgUserDefinedParm3  

AppnRtpRowStatusEntry  
SEQUENCE    
  RowStatus as appnRtpRowStatus  
  DisplayString as appnRtpComponentName  
  StorageType as appnRtpStorageType  
  AsciiStringIndex as appnRtpIndex  

AppnRtpOperEntry  
SEQUENCE    
  AsciiString as appnRtpLocalLsName  
  AsciiString as appnRtpRemoteCpName  
  AsciiString as appnRtpCosName  
  INTEGER as appnRtpActiveSessions  
  HexString as appnRtpLocalTcid  
  HexString as appnRtpRemoteTcid  
  Unsigned32 as appnRtpIdleTimer  
  INTEGER as appnRtpMaxBtuSize  

AppnRtpStatsEntry  
SEQUENCE    
  PassportCounter64 as appnRtpTxBytes  
  PassportCounter64 as appnRtpRxBytes  
  PassportCounter64 as appnRtpBytesResent  
  PassportCounter64 as appnRtpBytesDiscarded  
  PassportCounter64 as appnRtpPktTx  
  PassportCounter64 as appnRtpPktRx  
  PassportCounter64 as appnRtpPktResent  
  PassportCounter64 as appnRtpPktDiscard  
  PassportCounter64 as appnRtpLostFrames  
  Gauge32 as appnRtpCurTxRate  
  Gauge32 as appnRtpMaxTxRate  
  Gauge32 as appnRtpMinTxRate  
  Gauge32 as appnRtpCurRxRate  
  Gauge32 as appnRtpMaxRxRate  
  Gauge32 as appnRtpMinRxRate  
  Gauge32 as appnRtpBurstSize  
  TimeTicks as appnRtpUptime  
  Gauge32 as appnRtpSmoothRoundTripTime  
  Gauge32 as appnRtpLastRoundTripTime  
  Gauge32 as appnRtpShortReqTimer  
  PassportCounter64 as appnRtpShortReqTimeouts  
  PassportCounter64 as appnRtpIdleTimeouts  
  PassportCounter64 as appnRtpRxInvalidSnaFrames  
  PassportCounter64 as appnRtpInSessionControlFrames  
  PassportCounter64 as appnRtpOutSessionControlFrames  

AppnDluRowStatusEntry  
SEQUENCE    
  RowStatus as appnDluRowStatus  
  DisplayString as appnDluComponentName  
  StorageType as appnDluStorageType  
  AsciiStringIndex as appnDluIndex  

AppnDluOperEntry  
SEQUENCE    
  INTEGER as appnDluSscpSessActive  
  INTEGER as appnDluPluSessActive  
  AsciiString as appnDluDlusName  
  AsciiString as appnDluPluName  
  INTEGER as appnDluNauAddress  

AppnDluSscpRowStatusEntry  
SEQUENCE    
  RowStatus as appnDluSscpRowStatus  
  DisplayString as appnDluSscpComponentName  
  StorageType as appnDluSscpStorageType  
  NonReplicated as appnDluSscpIndex  

AppnDluSscpStatsEntry  
SEQUENCE    
  Unsigned32 as appnDluSscpRxRuSize  
  Unsigned32 as appnDluSscpMaxTxBtuSize  
  Unsigned32 as appnDluSscpMaxRxBtuSize  
  INTEGER as appnDluSscpMaxTxPacWin  
  INTEGER as appnDluSscpCurTxPacWin  
  INTEGER as appnDluSscpMaxRxPacWin  
  INTEGER as appnDluSscpCurRxPacWin  
  PassportCounter64 as appnDluSscpTxDataframes  
  PassportCounter64 as appnDluSscpTxFmdFrames  
  PassportCounter64 as appnDluSscpTxDataBytes  
  PassportCounter64 as appnDluSscpRxDataFrames  
  PassportCounter64 as appnDluSscpRxFmdFrames  
  PassportCounter64 as appnDluSscpRxDataBytes  
  Hex as appnDluSscpSidh  
  Hex as appnDluSscpSidl  
  INTEGER as appnDluSscpOdai  
  AsciiString as appnDluSscpLsName  

AppnDluUsStatRowStatusEntry  
SEQUENCE    
  RowStatus as appnDluUsStatRowStatus  
  DisplayString as appnDluUsStatComponentName  
  StorageType as appnDluUsStatStorageType  
  NonReplicated as appnDluUsStatIndex  

AppnDluUsStatStatsEntry  
SEQUENCE    
  Unsigned32 as appnDluUsStatRxRuSize  
  Unsigned32 as appnDluUsStatMaxTxBtuSize  
  Unsigned32 as appnDluUsStatMaxRxBtuSize  
  INTEGER as appnDluUsStatMaxTxPacWin  
  INTEGER as appnDluUsStatCurTxPacWin  
  INTEGER as appnDluUsStatMaxRxPacWin  
  INTEGER as appnDluUsStatCurRxPacWin  
  PassportCounter64 as appnDluUsStatTxDataframes  
  PassportCounter64 as appnDluUsStatTxFmdFrames  
  PassportCounter64 as appnDluUsStatTxDataBytes  
  PassportCounter64 as appnDluUsStatRxDataFrames  
  PassportCounter64 as appnDluUsStatRxFmdFrames  
  PassportCounter64 as appnDluUsStatRxDataBytes  
  Hex as appnDluUsStatSidh  
  Hex as appnDluUsStatSidl  
  INTEGER as appnDluUsStatOdai  
  AsciiString as appnDluUsStatLsName  

AppnDluDsStatRowStatusEntry  
SEQUENCE    
  RowStatus as appnDluDsStatRowStatus  
  DisplayString as appnDluDsStatComponentName  
  StorageType as appnDluDsStatStorageType  
  NonReplicated as appnDluDsStatIndex  

AppnDluDsStatStatsEntry  
SEQUENCE    
  Unsigned32 as appnDluDsStatRxRuSize  
  Unsigned32 as appnDluDsStatMaxTxBtuSize  
  Unsigned32 as appnDluDsStatMaxRxBtuSize  
  INTEGER as appnDluDsStatMaxTxPacWin  
  INTEGER as appnDluDsStatCurTxPacWin  
  INTEGER as appnDluDsStatMaxRxPacWin  
  INTEGER as appnDluDsStatCurRxPacWin  
  PassportCounter64 as appnDluDsStatTxDataframes  
  PassportCounter64 as appnDluDsStatTxFmdFrames  
  PassportCounter64 as appnDluDsStatTxDataBytes  
  PassportCounter64 as appnDluDsStatRxDataFrames  
  PassportCounter64 as appnDluDsStatRxFmdFrames  
  PassportCounter64 as appnDluDsStatRxDataBytes  
  Hex as appnDluDsStatSidh  
  Hex as appnDluDsStatSidl  
  INTEGER as appnDluDsStatOdai  
  AsciiString as appnDluDsStatLsName  

AppnDlusRowStatusEntry  
SEQUENCE    
  RowStatus as appnDlusRowStatus  
  DisplayString as appnDlusComponentName  
  StorageType as appnDlusStorageType  
  AsciiStringIndex as appnDlusIndex  

AppnDlusOperEntry  
SEQUENCE    
  INTEGER as appnDlusPrimaryDlus  
  INTEGER as appnDlusPipeState  
  Gauge32 as appnDlusActivePUs  

AppnDlusDlusStatEntry  
SEQUENCE    
  PassportCounter64 as appnDlusReqActPuTx  
  PassportCounter64 as appnDlusReqActPuRspRx  
  PassportCounter64 as appnDlusActPuRx  
  PassportCounter64 as appnDlusActPuRspTx  
  PassportCounter64 as appnDlusReqDactPuTx  
  PassportCounter64 as appnDlusReqDactPuRspRx  
  PassportCounter64 as appnDlusDactPuRx  
  PassportCounter64 as appnDlusDactPuRspTx  
  PassportCounter64 as appnDlusActLuRx  
  PassportCounter64 as appnDlusActLuRspTx  
  PassportCounter64 as appnDlusDactLuRx  
  PassportCounter64 as appnDlusDactLuRspTx  
  PassportCounter64 as appnDlusSscpPuMuRx  
  PassportCounter64 as appnDlusSscpPuMuTx  
  PassportCounter64 as appnDlusSscpLuMuRx  
  PassportCounter64 as appnDlusSscpLuMuTx  

AppnDLURRowStatusEntry  
SEQUENCE    
  RowStatus as appnDLURRowStatus  
  DisplayString as appnDLURComponentName  
  StorageType as appnDLURStorageType  
  NonReplicated as appnDLURIndex  

AppnDLURDlurParmsEntry  
SEQUENCE    
  AsciiString as appnDLURPrimaryDefDlusName  
  AsciiString as appnDLURSecondaryDefDlusName  
  Unsigned32 as appnDLURDlusRetryTimeout  
  Unsigned32 as appnDLURDlusRetryLimit  

AppnCosRowStatusEntry  
SEQUENCE    
  RowStatus as appnCosRowStatus  
  DisplayString as appnCosComponentName  
  StorageType as appnCosStorageType  
  AsciiStringIndex as appnCosIndex  

AppnCosProvEntry  
SEQUENCE    
  INTEGER as appnCosTransmissionPriority  

AppnCosTgRowStatusEntry  
SEQUENCE    
  RowStatus as appnCosTgRowStatus  
  DisplayString as appnCosTgComponentName  
  StorageType as appnCosTgStorageType  
  Integer32 as appnCosTgIndex  

AppnCosTgProvEntry  
SEQUENCE    
  INTEGER as appnCosTgMinEffectiveCapacity  
  INTEGER as appnCosTgMaxEffectiveCapacity  
  INTEGER as appnCosTgMinConnectCost  
  INTEGER as appnCosTgMaxConnectCost  
  INTEGER as appnCosTgMinByteCost  
  INTEGER as appnCosTgMaxByteCost  
  INTEGER as appnCosTgMinSecurity  
  INTEGER as appnCosTgMaxSecurity  
  INTEGER as appnCosTgMinPropDelay  
  INTEGER as appnCosTgMaxPropDelay  
  INTEGER as appnCosTgMinModemClass  
  INTEGER as appnCosTgMaxModemClass  
  INTEGER as appnCosTgMinUserDefParm1  
  INTEGER as appnCosTgMaxUserDefParm1  
  INTEGER as appnCosTgMinUserDefParm2  
  INTEGER as appnCosTgMaxUserDefParm2  
  INTEGER as appnCosTgMinUserDefParm3  
  INTEGER as appnCosTgMaxUserDefParm3  

AppnCosNodeRowStatusEntry  
SEQUENCE    
  RowStatus as appnCosNodeRowStatus  
  DisplayString as appnCosNodeComponentName  
  StorageType as appnCosNodeStorageType  
  Integer32 as appnCosNodeIndex  

AppnCosNodeProvEntry  
SEQUENCE    
  INTEGER as appnCosNodeMinRouteAddResistance  
  INTEGER as appnCosNodeMaxRouteAddResistance  
  INTEGER as appnCosNodeMinStatus  
  INTEGER as appnCosNodeMaxStatus  

AppnFrSvcRowStatusEntry  
SEQUENCE    
  RowStatus as appnFrSvcRowStatus  
  DisplayString as appnFrSvcComponentName  
  StorageType as appnFrSvcStorageType  
  NonReplicated as appnFrSvcIndex  

AppnFrSvcBanEntry  
SEQUENCE    
  DashedHexString as appnFrSvcBanLocalMac  
  Hex as appnFrSvcBanLocalSap  

AppnFrSvcProvisionedEntry  
SEQUENCE    
  Unsigned32 as appnFrSvcMaximumFrameRelaySvcs  
  INTEGER as appnFrSvcRateEnforcement  
  Unsigned32 as appnFrSvcMaximumCir  

AppnFrSvcOperationalEntry  
SEQUENCE    
  Gauge32 as appnFrSvcCurrentNumberOfSvcCalls  

AppnCnRowStatusEntry  
SEQUENCE    
  RowStatus as appnCnRowStatus  
  DisplayString as appnCnComponentName  
  StorageType as appnCnStorageType  
  AsciiStringIndex as appnCnIndex  

AppnCnOperEntry  
SEQUENCE    
  Gauge32 as appnCnNumberActivePorts