Nortel-Magellan-Passport-AtmPnniMIB

File: Nortel-Magellan-Passport-AtmPnniMIB.mib (201326 bytes)

Imported modules

RFC-1212 Nortel-Magellan-Passport-UsefulDefinitionsMIB Nortel-Magellan-Passport-StandardTextualConventionsMIB
Nortel-Magellan-Passport-TextualConventionsMIB Nortel-Magellan-Passport-AtmCoreMIB

Imported symbols

OBJECT-TYPE passportMIBs Counter32
DisplayString StorageType RowStatus
Gauge32 Integer32 Unsigned32
Hex NonReplicated HexString
FixedPoint1 AsciiStringIndex atmIfVptIndex
atmIfVpt atmIfIndex atmIf

Defined Objects

atmIfVptPnni 1.3.6.1.4.1.562.2.4.1.114.9.7
OBJECT IDENTIFIER    

atmIfVptPnniRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.9.7.1
This entry controls the addition and deletion of atmIfVptPnni components.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniRowStatusEntry

atmIfVptPnniRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.1.1
A single entry in the table represents a single atmIfVptPnni component.
OBJECT-TYPE    
  AtmIfVptPnniRowStatusEntry  

atmIfVptPnniRowStatus 1.3.6.1.4.1.562.2.4.1.114.9.7.1.1.1
This variable is used as the basis for SNMP naming of atmIfVptPnni components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

atmIfVptPnniComponentName 1.3.6.1.4.1.562.2.4.1.114.9.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

atmIfVptPnniStorageType 1.3.6.1.4.1.562.2.4.1.114.9.7.1.1.4
This variable represents the storage type value for the atmIfVptPnni tables.
OBJECT-TYPE    
  StorageType  

atmIfVptPnniIndex 1.3.6.1.4.1.562.2.4.1.114.9.7.1.1.10
This variable represents the index for the atmIfVptPnni tables.
OBJECT-TYPE    
  NonReplicated  

atmIfVptPnniSig 1.3.6.1.4.1.562.2.4.1.114.9.7.2
OBJECT IDENTIFIER    

atmIfVptPnniSigRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.9.7.2.1
This entry controls the addition and deletion of atmIfVptPnniSig components.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniSigRowStatusEntry

atmIfVptPnniSigRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.2.1.1
A single entry in the table represents a single atmIfVptPnniSig component.
OBJECT-TYPE    
  AtmIfVptPnniSigRowStatusEntry  

atmIfVptPnniSigRowStatus 1.3.6.1.4.1.562.2.4.1.114.9.7.2.1.1.1
This variable is used as the basis for SNMP naming of atmIfVptPnniSig components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

atmIfVptPnniSigComponentName 1.3.6.1.4.1.562.2.4.1.114.9.7.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

atmIfVptPnniSigStorageType 1.3.6.1.4.1.562.2.4.1.114.9.7.2.1.1.4
This variable represents the storage type value for the atmIfVptPnniSig tables.
OBJECT-TYPE    
  StorageType  

atmIfVptPnniSigIndex 1.3.6.1.4.1.562.2.4.1.114.9.7.2.1.1.10
This variable represents the index for the atmIfVptPnniSig tables.
OBJECT-TYPE    
  NonReplicated  

atmIfVptPnniSigVcd 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2
OBJECT IDENTIFIER    

atmIfVptPnniSigVcdRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.1
This entry controls the addition and deletion of atmIfVptPnniSigVcd components.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniSigVcdRowStatusEntry

atmIfVptPnniSigVcdRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.1.1
A single entry in the table represents a single atmIfVptPnniSigVcd component.
OBJECT-TYPE    
  AtmIfVptPnniSigVcdRowStatusEntry  

atmIfVptPnniSigVcdRowStatus 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.1.1.1
This variable is used as the basis for SNMP naming of atmIfVptPnniSigVcd components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

atmIfVptPnniSigVcdComponentName 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

atmIfVptPnniSigVcdStorageType 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.1.1.4
This variable represents the storage type value for the atmIfVptPnniSigVcd tables.
OBJECT-TYPE    
  StorageType  

atmIfVptPnniSigVcdIndex 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.1.1.10
This variable represents the index for the atmIfVptPnniSigVcd tables.
OBJECT-TYPE    
  NonReplicated  

atmIfVptPnniSigVcdProvTable 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.10
This group contains the provisionable traffic attributes for a control channel.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniSigVcdProvEntry

atmIfVptPnniSigVcdProvEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.10.1
An entry in the atmIfVptPnniSigVcdProvTable.
OBJECT-TYPE    
  AtmIfVptPnniSigVcdProvEntry  

atmIfVptPnniSigVcdTrafficDescType 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.10.1.1
This attribute specifies the type of traffic management which is applied to both the transmit and receive direction of this connection as defined in the ATM Forum. The trafficDescType determines the number and meaning of the parameters in the trafficDescParm attribute.
OBJECT-TYPE    
  INTEGER n3(3), n6(6), n7(7), n8(8)  

atmIfVptPnniSigVcdAtmServiceCategory 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.10.1.3
This attribute specifies the ATM service category for both directions of the connection. The constantBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. The consistent availability of a fixed quantity of bandwidth is considered appropriate for CBR service. Cells which are delayed beyond the value specified by CellTransfer Delay are assumed to be of significantly reduce value to the application. The rtVariableBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. Sources are expected to transmit at a rate which varies with time. Equivalently, the source can be described as 'bursty'. Cells which are delayed beyond the value specified by CTD are assumed to be of significantly reduced value to the application. Real time VBR service may support statistical multiplexing of real time sources. The nrtVariableBitRate service category is intended for non-real time applications which have bursty traffic characteristics and which can be characterized in terms of a PCR, SCR, and MBS. For those cells which are transferred within the traffic contract, the application expects a low cell loss ratio. For all connections, it expects a bound on the mean cell transfer delay. Non-real time VBR service may support statistical multiplexing of connections. The unspecifiedBitRate service is intended for non-real time applications; that is, those not requiring tightly constrained delay and delay variation. UBR sources are expected to be bursty. UBR service supports a high degree of statistical multiplexing among sources. UBR service does not specify traffic related service guarantees. No numerical commitments are made with respect to the cell loss ratio experienced by a UBR connection, or as to the cell transfer delay experienced by cells on the connection.
OBJECT-TYPE    
  INTEGER unspecifiedBitRate(0), constantBitRate(1), rtVariableBitRate(2), nrtVariableBitRate(3)  

atmIfVptPnniSigVcdQosClass 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.10.1.21
This attribute specifies the quality of service for both the forward and backward direction for this connection. Class 1 supports a QOS that meets Service Class A performance requirements (Circuit emulation, constant bit rate video). Class 2 supports a QOS that meets Service Class B performance requirements (Variable bit rate audio and video). Class 3 supports a QOS that meets Service Class C performance requirements (Connection-Oriented Data Transfer). Class 4 supports a QOS that meets Service Class D performance requirements (Connectionless Data Transfer). Class 0 is the unspecified bit rate QOS class; no objective is specified for the performance parameters.
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4)  

atmIfVptPnniSigVcdTrafficShaping 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.10.1.50
This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled.
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

atmIfVptPnniSigVcdUnshapedTransmitQueueing 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.10.1.60
This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this connection if it is unshaped. Refer to the unshapedTransmitQueueing attribute under the AtmIf CA service category subcomponent for more details on the meaning of this attribute. When this attribute is set to sameAsCa, the transmit queueing method for the connection is based on the unshapedTransmitQueueing attribute of the connection's service category component under the ConnectionAdministrator. When this attribute is set to common, transmit traffic on this unshaped connection is destined for the common queue. The value sameAsInterface is for migration from previous software releases, but should no longer be used
OBJECT-TYPE    
  INTEGER common(1), sameAsCa(3)  

atmIfVptPnniSigVcdUsageParameterControl 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.10.1.70
This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface. When sameAsCa is selected, UPC for the connection is based on the usageParameterControl attribute of the connection's service category component under the ConnectionAdministrator. If the service category has UPC enabled, then UPC is enabled for the connection. Note that enabling UPC may have no effect under certain cases. These cases are listed in the description of the usageParameterControl operational attribute, which is under the Vcc Tm or Vpc Tm component. When disabled is selected, UPC for this connection is disabled. The value sameAsInterface is for migration from previous software releases, but should no longer be used
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

atmIfVptPnniSigVcdTdpTable 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.387
This attribute is a vector of five traffic parameters whose meanings are defined by the trafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR) and requested shaping rate are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. CDVT is expressed in microseconds. The values of PCR, SCR, MBS and CDVT are used for connection admission control (CAC). The value of CDVT is only used for connections where the atmServiceCategory is constantBitRate. For all other values of atmServiceCategory, CDVT is ignored. The values of PCR, SCR and requested shaping rate are used to determine the actual shaping rate where traffic shaping is enabled. When trafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3 must be zero. When trafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. Whenever it is valid for PCR to be specified, parameter 5 may also be used to specify a requested shaping rate. A non-zero value in parameter 5 overrides the value in parameter 1 and is used as the peak cell rate in calculations of CAC and shaping rate. For trafficDescType 3 the traffic is shaped at the next rate less than the PCR. For trafficDescType 6, 7, and 8, the traffic is shaped at the highest available rate which is between PCR and SCR. However, if there is no available shaping rate between PCR and SCR, traffic is shaped at the next rate above the PCR.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniSigVcdTdpEntry

atmIfVptPnniSigVcdTdpEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.387.1
An entry in the atmIfVptPnniSigVcdTdpTable.
OBJECT-TYPE    
  AtmIfVptPnniSigVcdTdpEntry  

atmIfVptPnniSigVcdTdpIndex 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.387.1.1
This variable represents the atmIfVptPnniSigVcdTdpTable specific index for the atmIfVptPnniSigVcdTdpTable.
OBJECT-TYPE    
  Integer32 1..5  

atmIfVptPnniSigVcdTdpValue 1.3.6.1.4.1.562.2.4.1.114.9.7.2.2.387.1.2
This variable represents an individual value for the atmIfVptPnniSigVcdTdpTable.
OBJECT-TYPE    
  Unsigned32 0..2147483647  

atmIfVptPnniSigProvTable 1.3.6.1.4.1.562.2.4.1.114.9.7.2.10
This attribute group contains the provisionable attributes for the Signalling component.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniSigProvEntry

atmIfVptPnniSigProvEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.2.10.1
An entry in the atmIfVptPnniSigProvTable.
OBJECT-TYPE    
  AtmIfVptPnniSigProvEntry  

atmIfVptPnniSigVci 1.3.6.1.4.1.562.2.4.1.114.9.7.2.10.1.1
This attribute specifies the signalling channel number.
OBJECT-TYPE    
  Unsigned32 0..65535  

atmIfVptPnniSigAddressConversion 1.3.6.1.4.1.562.2.4.1.114.9.7.2.10.1.2
This attribute specifies the address conversion on the outgoing signalling PDUs. The options are none, nativeE164, or nsap. The none option is the default and if this option is chosen then nothing is done to the address information element (IE) in the outgoing signalling message. If nativeE164 option is chosen, then only NSAP encapsulated E.164 addresses with zeros in the ESI are converted to native E.164 format in the outgoing signalling message. If the NSAP address is not encapsulated E.164 or the ESI field is not zeros and the nativeE164 option is chosen, then the call is cleared. If the nsap option is chosen, then native E.164 addresses are converted to NSAP E.164 with zeros in the ESI field; otherwise the address is in NSAP format and is not changed.
OBJECT-TYPE    
  INTEGER none(0), nativeE164(1), nsap(2)  

atmIfVptPnniSigStateTable 1.3.6.1.4.1.562.2.4.1.114.9.7.2.11
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniSigStateEntry

atmIfVptPnniSigStateEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.2.11.1
An entry in the atmIfVptPnniSigStateTable.
OBJECT-TYPE    
  AtmIfVptPnniSigStateEntry  

atmIfVptPnniSigAdminState 1.3.6.1.4.1.562.2.4.1.114.9.7.2.11.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

atmIfVptPnniSigOperationalState 1.3.6.1.4.1.562.2.4.1.114.9.7.2.11.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

atmIfVptPnniSigUsageState 1.3.6.1.4.1.562.2.4.1.114.9.7.2.11.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

atmIfVptPnniSigOperTable 1.3.6.1.4.1.562.2.4.1.114.9.7.2.12
This attribute contains the operational attributes for the AtmSignalling component.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniSigOperEntry

atmIfVptPnniSigOperEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.2.12.1
An entry in the atmIfVptPnniSigOperTable.
OBJECT-TYPE    
  AtmIfVptPnniSigOperEntry  

atmIfVptPnniSigLastTxCauseCode 1.3.6.1.4.1.562.2.4.1.114.9.7.2.12.1.1
This attribute indicates the cause code in the last transmitted signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages.
OBJECT-TYPE    
  Unsigned32 0..255  

atmIfVptPnniSigLastTxDiagCode 1.3.6.1.4.1.562.2.4.1.114.9.7.2.12.1.2
This attribute contains the diagnostic code in the last transmitted signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0.
OBJECT-TYPE    
  Hex 0..255  

atmIfVptPnniSigLastRxCauseCode 1.3.6.1.4.1.562.2.4.1.114.9.7.2.12.1.3
This attribute contains the cause code in the last received signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages.
OBJECT-TYPE    
  Unsigned32 0..255  

atmIfVptPnniSigLastRxDiagCode 1.3.6.1.4.1.562.2.4.1.114.9.7.2.12.1.4
This attribute contains the diagnostic code in the last received signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0.
OBJECT-TYPE    
  Hex 0..255  

atmIfVptPnniSigStatsTable 1.3.6.1.4.1.562.2.4.1.114.9.7.2.13
This attribute group contains the statistics associated with the AtmSignalling component.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniSigStatsEntry

atmIfVptPnniSigStatsEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.2.13.1
An entry in the atmIfVptPnniSigStatsTable.
OBJECT-TYPE    
  AtmIfVptPnniSigStatsEntry  

atmIfVptPnniSigCurrentConnections 1.3.6.1.4.1.562.2.4.1.114.9.7.2.13.1.1
This attribute indicates the total number of currently active connections.
OBJECT-TYPE    
  Counter32  

atmIfVptPnniSigPeakConnections 1.3.6.1.4.1.562.2.4.1.114.9.7.2.13.1.2
This attribute indicates the high water mark of active point-to- point and point-to-multipoint connections.
OBJECT-TYPE    
  Gauge32 0..4294967295  

atmIfVptPnniSigSuccessfulConnections 1.3.6.1.4.1.562.2.4.1.114.9.7.2.13.1.3
This attribute counts the total number of switched point-to- point and point-to-multipoint connections that were successfully established. The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

atmIfVptPnniSigFailedConnections 1.3.6.1.4.1.562.2.4.1.114.9.7.2.13.1.4
This attribute counts the total number of switched connections that were not successfully established.The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

atmIfVptPnniSigTxPdus 1.3.6.1.4.1.562.2.4.1.114.9.7.2.13.1.5
This attribute counts the number of transmitted signalling PDUs.The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

atmIfVptPnniSigRxPdus 1.3.6.1.4.1.562.2.4.1.114.9.7.2.13.1.6
This attribute counts the number of received signalling PDUs.The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

atmIfVptPnniSigCurrentPmpConnections 1.3.6.1.4.1.562.2.4.1.114.9.7.2.13.1.7
This attribute indicates the number of currently active point-to- multipoint connections.
OBJECT-TYPE    
  Gauge32 0..4294967295  

atmIfVptPnniSigPeakPmpConnections 1.3.6.1.4.1.562.2.4.1.114.9.7.2.13.1.8
This attribute indicates the high water mark of active point-to- multipoint connections.
OBJECT-TYPE    
  Gauge32 0..4294967295  

atmIfVptPnniSigSuccessfulPmpConnections 1.3.6.1.4.1.562.2.4.1.114.9.7.2.13.1.9
This attribute counts the total number of switched point-to- multipoint connections that were successfully established. The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

atmIfVptPnniSigFailedPmpConnections 1.3.6.1.4.1.562.2.4.1.114.9.7.2.13.1.10
This attribute counts the number of switched point-to- multipoint connections that were not successfully established.The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

atmIfVptPnniSigNewCurrentConnections 1.3.6.1.4.1.562.2.4.1.114.9.7.2.13.1.11
This attribute indicates the total number of currently active point-to- point and point-to-multipoint connections.
OBJECT-TYPE    
  Gauge32 0..4294967295  

atmIfVptPnniRcc 1.3.6.1.4.1.562.2.4.1.114.9.7.3
OBJECT IDENTIFIER    

atmIfVptPnniRccRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.9.7.3.1
This entry controls the addition and deletion of atmIfVptPnniRcc components.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniRccRowStatusEntry

atmIfVptPnniRccRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.3.1.1
A single entry in the table represents a single atmIfVptPnniRcc component.
OBJECT-TYPE    
  AtmIfVptPnniRccRowStatusEntry  

atmIfVptPnniRccRowStatus 1.3.6.1.4.1.562.2.4.1.114.9.7.3.1.1.1
This variable is used as the basis for SNMP naming of atmIfVptPnniRcc components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

atmIfVptPnniRccComponentName 1.3.6.1.4.1.562.2.4.1.114.9.7.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

atmIfVptPnniRccStorageType 1.3.6.1.4.1.562.2.4.1.114.9.7.3.1.1.4
This variable represents the storage type value for the atmIfVptPnniRcc tables.
OBJECT-TYPE    
  StorageType  

atmIfVptPnniRccIndex 1.3.6.1.4.1.562.2.4.1.114.9.7.3.1.1.10
This variable represents the index for the atmIfVptPnniRcc tables.
OBJECT-TYPE    
  NonReplicated  

atmIfVptPnniRccVcd 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2
OBJECT IDENTIFIER    

atmIfVptPnniRccVcdRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.1
This entry controls the addition and deletion of atmIfVptPnniRccVcd components.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniRccVcdRowStatusEntry

atmIfVptPnniRccVcdRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.1.1
A single entry in the table represents a single atmIfVptPnniRccVcd component.
OBJECT-TYPE    
  AtmIfVptPnniRccVcdRowStatusEntry  

atmIfVptPnniRccVcdRowStatus 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.1.1.1
This variable is used as the basis for SNMP naming of atmIfVptPnniRccVcd components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

atmIfVptPnniRccVcdComponentName 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

atmIfVptPnniRccVcdStorageType 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.1.1.4
This variable represents the storage type value for the atmIfVptPnniRccVcd tables.
OBJECT-TYPE    
  StorageType  

atmIfVptPnniRccVcdIndex 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.1.1.10
This variable represents the index for the atmIfVptPnniRccVcd tables.
OBJECT-TYPE    
  NonReplicated  

atmIfVptPnniRccVcdProvTable 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.10
This group contains the provisionable traffic attributes for a control channel.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniRccVcdProvEntry

atmIfVptPnniRccVcdProvEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.10.1
An entry in the atmIfVptPnniRccVcdProvTable.
OBJECT-TYPE    
  AtmIfVptPnniRccVcdProvEntry  

atmIfVptPnniRccVcdTrafficDescType 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.10.1.1
This attribute specifies the type of traffic management which is applied to both the transmit and receive direction of this connection as defined in the ATM Forum. The trafficDescType determines the number and meaning of the parameters in the trafficDescParm attribute.
OBJECT-TYPE    
  INTEGER n3(3), n6(6), n7(7), n8(8)  

atmIfVptPnniRccVcdAtmServiceCategory 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.10.1.3
This attribute specifies the ATM service category for both directions of the connection. The constantBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. The consistent availability of a fixed quantity of bandwidth is considered appropriate for CBR service. Cells which are delayed beyond the value specified by CellTransfer Delay are assumed to be of significantly reduce value to the application. The rtVariableBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. Sources are expected to transmit at a rate which varies with time. Equivalently, the source can be described as 'bursty'. Cells which are delayed beyond the value specified by CTD are assumed to be of significantly reduced value to the application. Real time VBR service may support statistical multiplexing of real time sources. The nrtVariableBitRate service category is intended for non-real time applications which have bursty traffic characteristics and which can be characterized in terms of a PCR, SCR, and MBS. For those cells which are transferred within the traffic contract, the application expects a low cell loss ratio. For all connections, it expects a bound on the mean cell transfer delay. Non-real time VBR service may support statistical multiplexing of connections. The unspecifiedBitRate service is intended for non-real time applications; that is, those not requiring tightly constrained delay and delay variation. UBR sources are expected to be bursty. UBR service supports a high degree of statistical multiplexing among sources. UBR service does not specify traffic related service guarantees. No numerical commitments are made with respect to the cell loss ratio experienced by a UBR connection, or as to the cell transfer delay experienced by cells on the connection.
OBJECT-TYPE    
  INTEGER unspecifiedBitRate(0), constantBitRate(1), rtVariableBitRate(2), nrtVariableBitRate(3)  

atmIfVptPnniRccVcdQosClass 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.10.1.21
This attribute specifies the quality of service for both the forward and backward direction for this connection. Class 1 supports a QOS that meets Service Class A performance requirements (Circuit emulation, constant bit rate video). Class 2 supports a QOS that meets Service Class B performance requirements (Variable bit rate audio and video). Class 3 supports a QOS that meets Service Class C performance requirements (Connection-Oriented Data Transfer). Class 4 supports a QOS that meets Service Class D performance requirements (Connectionless Data Transfer). Class 0 is the unspecified bit rate QOS class; no objective is specified for the performance parameters.
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4)  

atmIfVptPnniRccVcdTrafficShaping 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.10.1.50
This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled.
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

atmIfVptPnniRccVcdUnshapedTransmitQueueing 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.10.1.60
This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this connection if it is unshaped. Refer to the unshapedTransmitQueueing attribute under the AtmIf CA service category subcomponent for more details on the meaning of this attribute. When this attribute is set to sameAsCa, the transmit queueing method for the connection is based on the unshapedTransmitQueueing attribute of the connection's service category component under the ConnectionAdministrator. When this attribute is set to common, transmit traffic on this unshaped connection is destined for the common queue. The value sameAsInterface is for migration from previous software releases, but should no longer be used
OBJECT-TYPE    
  INTEGER common(1), sameAsCa(3)  

atmIfVptPnniRccVcdUsageParameterControl 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.10.1.70
This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface. When sameAsCa is selected, UPC for the connection is based on the usageParameterControl attribute of the connection's service category component under the ConnectionAdministrator. If the service category has UPC enabled, then UPC is enabled for the connection. Note that enabling UPC may have no effect under certain cases. These cases are listed in the description of the usageParameterControl operational attribute, which is under the Vcc Tm or Vpc Tm component. When disabled is selected, UPC for this connection is disabled. The value sameAsInterface is for migration from previous software releases, but should no longer be used
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

atmIfVptPnniRccVcdTdpTable 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.387
This attribute is a vector of five traffic parameters whose meanings are defined by the trafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR) and requested shaping rate are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. CDVT is expressed in microseconds. The values of PCR, SCR, MBS and CDVT are used for connection admission control (CAC). The value of CDVT is only used for connections where the atmServiceCategory is constantBitRate. For all other values of atmServiceCategory, CDVT is ignored. The values of PCR, SCR and requested shaping rate are used to determine the actual shaping rate where traffic shaping is enabled. When trafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3 must be zero. When trafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. Whenever it is valid for PCR to be specified, parameter 5 may also be used to specify a requested shaping rate. A non-zero value in parameter 5 overrides the value in parameter 1 and is used as the peak cell rate in calculations of CAC and shaping rate. For trafficDescType 3 the traffic is shaped at the next rate less than the PCR. For trafficDescType 6, 7, and 8, the traffic is shaped at the highest available rate which is between PCR and SCR. However, if there is no available shaping rate between PCR and SCR, traffic is shaped at the next rate above the PCR.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniRccVcdTdpEntry

atmIfVptPnniRccVcdTdpEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.387.1
An entry in the atmIfVptPnniRccVcdTdpTable.
OBJECT-TYPE    
  AtmIfVptPnniRccVcdTdpEntry  

atmIfVptPnniRccVcdTdpIndex 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.387.1.1
This variable represents the atmIfVptPnniRccVcdTdpTable specific index for the atmIfVptPnniRccVcdTdpTable.
OBJECT-TYPE    
  Integer32 1..5  

atmIfVptPnniRccVcdTdpValue 1.3.6.1.4.1.562.2.4.1.114.9.7.3.2.387.1.2
This variable represents an individual value for the atmIfVptPnniRccVcdTdpTable.
OBJECT-TYPE    
  Unsigned32 0..2147483647  

atmIfVptPnniRccProvTable 1.3.6.1.4.1.562.2.4.1.114.9.7.3.10
This group contains the generic provisionable attributes of an Rcc component.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniRccProvEntry

atmIfVptPnniRccProvEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.3.10.1
An entry in the atmIfVptPnniRccProvTable.
OBJECT-TYPE    
  AtmIfVptPnniRccProvEntry  

atmIfVptPnniRccVci 1.3.6.1.4.1.562.2.4.1.114.9.7.3.10.1.1
This attribute specifies the VCI for the Routing Control Channel (RCC). It is not recommended that the value be changed from the default of 18 unless absolutely necessary. If a different VCI is specified, ensure that the RCC at the far end is provisioned to use the same VCI, otherwise the RCC will not come up.
OBJECT-TYPE    
  Unsigned32 0..65535  

atmIfVptPnniRccHlParmsTable 1.3.6.1.4.1.562.2.4.1.114.9.7.3.11
This group contains the provisionable Hello protocol parameters for an Rcc component.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniRccHlParmsEntry

atmIfVptPnniRccHlParmsEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.3.11.1
An entry in the atmIfVptPnniRccHlParmsTable.
OBJECT-TYPE    
  AtmIfVptPnniRccHlParmsEntry  

atmIfVptPnniRccHelloHoldDown 1.3.6.1.4.1.562.2.4.1.114.9.7.3.11.1.1
This attribute is used to limit the rate at which this node sends out Hello packets. Specifically, it specifies the minimum time between successive Hellos. A value of 0 specifies that the value provisioned for the helloHoldDown attribute of the ARtg Pnni component should be used.
OBJECT-TYPE    
  FixedPoint1 0..655350  

atmIfVptPnniRccHelloInterval 1.3.6.1.4.1.562.2.4.1.114.9.7.3.11.1.2
This attribute specifies the duration of the Hello Timer. Every helloInterval seconds, this node will send out a Hello packet to the neighbor node, subject to the helloHoldDown timer having expired at least once since the last Hello packet was sent. A value of 0 specifies that the value provisioned for the helloInterval attribute of the ARtg Pnni component should be used.
OBJECT-TYPE    
  Unsigned32 0..65535  

atmIfVptPnniRccHelloInactivityFactor 1.3.6.1.4.1.562.2.4.1.114.9.7.3.11.1.3
This attribute specifies the number of Hello intervals allowed to pass without receiving a Hello from the neighbor node, before an attempt is made to re-stage. The hello inactivity timer is enabled in the oneWayInside, twoWayInside, oneWayOutside, twoWayOutside and commonOutside hello states (see the helloState attribute on the Rcc component for a description of these states). Note that the value for the Hello interval used in the calculation is the one specified in the Hello packet from the neighbor node. A value of 0 specifies that the value provisioned for the helloInactivityFactor attribute of the ARtg Pnni component should be used. DESCRIPTION
OBJECT-TYPE    
  Unsigned32 0..65535  

atmIfVptPnniRccStateTable 1.3.6.1.4.1.562.2.4.1.114.9.7.3.12
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniRccStateEntry

atmIfVptPnniRccStateEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.3.12.1
An entry in the atmIfVptPnniRccStateTable.
OBJECT-TYPE    
  AtmIfVptPnniRccStateEntry  

atmIfVptPnniRccAdminState 1.3.6.1.4.1.562.2.4.1.114.9.7.3.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

atmIfVptPnniRccOperationalState 1.3.6.1.4.1.562.2.4.1.114.9.7.3.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

atmIfVptPnniRccUsageState 1.3.6.1.4.1.562.2.4.1.114.9.7.3.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

atmIfVptPnniRccOperTable 1.3.6.1.4.1.562.2.4.1.114.9.7.3.13
This group contains the operational attributes for an Rcc component.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniRccOperEntry

atmIfVptPnniRccOperEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.3.13.1
An entry in the atmIfVptPnniRccOperTable.
OBJECT-TYPE    
  AtmIfVptPnniRccOperEntry  

atmIfVptPnniRccType 1.3.6.1.4.1.562.2.4.1.114.9.7.3.13.1.1
This attribute indicates the role of this link in the PNNI hierarchy. The following values are possible: unknown: the Hello protocol has not yet determined the role of the link. lowestLevelHorizLink: the link is a horizontal link between two lowest level nodes. lowestLevelOutsideLink: the link is an outside link between two border nodes. horizontalLinkToLgn: the link is a horizontal link to a Logical Group Node (LGN). uplink: the link is a uplink to a higher level LGN.
OBJECT-TYPE    
  INTEGER unknown(0), lowestLevelHorizLink(1), lowestLevelOutsideLink(2), horizontalLinkToLGN(3), uplink(4)  

atmIfVptPnniRccNegotiatedVersion 1.3.6.1.4.1.562.2.4.1.114.9.7.3.13.1.2
This attribute indicates the PNNI version negotiated with the neighbor node.
OBJECT-TYPE    
  INTEGER unsupported(0), version1point0(1)  

atmIfVptPnniRccHelloState 1.3.6.1.4.1.562.2.4.1.114.9.7.3.13.1.3
This attribute indicates the state of the Hello protocol exchange over this link. The following are the possible values for this attribute: down: the link is down; no PNNI routing packets will be sent over or received over such a link. This is the initial state of the Hello Finite State Machine, and can also be reached when lower-level protocols have indicated that the link is not usable. attempt: no Hello packets or Hello packets, with mismatch information, have been received recently from the neighbor. Attempts are made to contact the neighbor node by sending out Hello packets every helloInterval seconds. oneWayInside: Hello packets have been recently received from the neighbor and it has been established that both nodes are members of the same peer group, but the remote node ID and remote port ID in the neighbor's Hello packets were set to zero. A Hello packet is sent to the neighbor and the Hello timer is restarted. twoWayInside: Bidirectional communication over this link between this node and the neighbor node has been achieved. oneWayOutside: Hello packets have been recently received from the neighbor and it has been established that both nodes are members of a different peer group, but the remote node ID and remote port ID in the neighbor's Hello packets were set to zero. twoWayOutside: Hellos have recently been received from the neighbor indicating that the neighbor node belongs to a different peer group. The correct remote node ID and remote port ID fields were included in the Hello packet, but the nodal hierarchy list did not include any common peer group. This state can also be reached if a hierarchy mismatch occurs while in the commonOutside state. commonOutside: A common level of the routing hierarchy has been found, in addition to achieving full bi-directional communication between the two nodes.
OBJECT-TYPE    
  INTEGER notApplicable(0), down(1), attempt(2), oneWayInside(3), twoWayInside(4), oneWayOutside(5), twoWayOutside(6), commonOutside(7)  

atmIfVptPnniRccRemoteNodeId 1.3.6.1.4.1.562.2.4.1.114.9.7.3.13.1.4
This attribute indicates the neighbor node's node id.
OBJECT-TYPE    
  HexString SIZE(22)  

atmIfVptPnniRccRemotePortId 1.3.6.1.4.1.562.2.4.1.114.9.7.3.13.1.5
This attribute indicates the neighbor node's port id.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

atmIfVptPnniRccStatsTable 1.3.6.1.4.1.562.2.4.1.114.9.7.3.14
This group contains the statistical attributes for an Rcc component.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniRccStatsEntry

atmIfVptPnniRccStatsEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.3.14.1
An entry in the atmIfVptPnniRccStatsTable.
OBJECT-TYPE    
  AtmIfVptPnniRccStatsEntry  

atmIfVptPnniRccHelloPacketsRx 1.3.6.1.4.1.562.2.4.1.114.9.7.3.14.1.1
This attribute counts the total number of Hello packets received across this RCC, including bad and mismatched Hello packets. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

atmIfVptPnniRccHelloPacketsTx 1.3.6.1.4.1.562.2.4.1.114.9.7.3.14.1.2
This attribute counts the total number of Hello packets transmitted across this RCC. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

atmIfVptPnniRccMismatchedHelloPacketsRx 1.3.6.1.4.1.562.2.4.1.114.9.7.3.14.1.3
This attribute counts the total number of mismatched Hello packets received over this RCC. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

atmIfVptPnniRccBadHelloPacketsRx 1.3.6.1.4.1.562.2.4.1.114.9.7.3.14.1.4
This attribute counts the total number of bad Hello packets received over this RCC. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

atmIfVptPnniAddr 1.3.6.1.4.1.562.2.4.1.114.9.7.4
OBJECT IDENTIFIER    

atmIfVptPnniAddrRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.9.7.4.1
This entry controls the addition and deletion of atmIfVptPnniAddr components.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniAddrRowStatusEntry

atmIfVptPnniAddrRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.4.1.1
A single entry in the table represents a single atmIfVptPnniAddr component.
OBJECT-TYPE    
  AtmIfVptPnniAddrRowStatusEntry  

atmIfVptPnniAddrRowStatus 1.3.6.1.4.1.562.2.4.1.114.9.7.4.1.1.1
This variable is used as the basis for SNMP naming of atmIfVptPnniAddr components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

atmIfVptPnniAddrComponentName 1.3.6.1.4.1.562.2.4.1.114.9.7.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

atmIfVptPnniAddrStorageType 1.3.6.1.4.1.562.2.4.1.114.9.7.4.1.1.4
This variable represents the storage type value for the atmIfVptPnniAddr tables.
OBJECT-TYPE    
  StorageType  

atmIfVptPnniAddrAddressIndex 1.3.6.1.4.1.562.2.4.1.114.9.7.4.1.1.10
This variable represents an index for the atmIfVptPnniAddr tables.
OBJECT-TYPE    
  AsciiStringIndex SIZE(1..40)  

atmIfVptPnniAddrAddressTypeIndex 1.3.6.1.4.1.562.2.4.1.114.9.7.4.1.1.11
This variable represents an index for the atmIfVptPnniAddr tables.
OBJECT-TYPE    
  INTEGER primary(0), alternate(1), registered(2), default(3)  

atmIfVptPnniAddrTermSP 1.3.6.1.4.1.562.2.4.1.114.9.7.4.2
OBJECT IDENTIFIER    

atmIfVptPnniAddrTermSPRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.9.7.4.2.1
This entry controls the addition and deletion of atmIfVptPnniAddrTermSP components.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniAddrTermSPRowStatusEntry

atmIfVptPnniAddrTermSPRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.4.2.1.1
A single entry in the table represents a single atmIfVptPnniAddrTermSP component.
OBJECT-TYPE    
  AtmIfVptPnniAddrTermSPRowStatusEntry  

atmIfVptPnniAddrTermSPRowStatus 1.3.6.1.4.1.562.2.4.1.114.9.7.4.2.1.1.1
This variable is used as the basis for SNMP naming of atmIfVptPnniAddrTermSP components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

atmIfVptPnniAddrTermSPComponentName 1.3.6.1.4.1.562.2.4.1.114.9.7.4.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

atmIfVptPnniAddrTermSPStorageType 1.3.6.1.4.1.562.2.4.1.114.9.7.4.2.1.1.4
This variable represents the storage type value for the atmIfVptPnniAddrTermSP tables.
OBJECT-TYPE    
  StorageType  

atmIfVptPnniAddrTermSPIndex 1.3.6.1.4.1.562.2.4.1.114.9.7.4.2.1.1.10
This variable represents the index for the atmIfVptPnniAddrTermSP tables.
OBJECT-TYPE    
  NonReplicated  

atmIfVptPnniAddrPnniInfo 1.3.6.1.4.1.562.2.4.1.114.9.7.4.3
OBJECT IDENTIFIER    

atmIfVptPnniAddrPnniInfoRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.9.7.4.3.1
This entry controls the addition and deletion of atmIfVptPnniAddrPnniInfo components.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniAddrPnniInfoRowStatusEntry

atmIfVptPnniAddrPnniInfoRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.4.3.1.1
A single entry in the table represents a single atmIfVptPnniAddrPnniInfo component.
OBJECT-TYPE    
  AtmIfVptPnniAddrPnniInfoRowStatusEntry  

atmIfVptPnniAddrPnniInfoRowStatus 1.3.6.1.4.1.562.2.4.1.114.9.7.4.3.1.1.1
This variable is used as the basis for SNMP naming of atmIfVptPnniAddrPnniInfo components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

atmIfVptPnniAddrPnniInfoComponentName 1.3.6.1.4.1.562.2.4.1.114.9.7.4.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

atmIfVptPnniAddrPnniInfoStorageType 1.3.6.1.4.1.562.2.4.1.114.9.7.4.3.1.1.4
This variable represents the storage type value for the atmIfVptPnniAddrPnniInfo tables.
OBJECT-TYPE    
  StorageType  

atmIfVptPnniAddrPnniInfoIndex 1.3.6.1.4.1.562.2.4.1.114.9.7.4.3.1.1.10
This variable represents the index for the atmIfVptPnniAddrPnniInfo tables.
OBJECT-TYPE    
  NonReplicated  

atmIfVptPnniAddrPnniInfoProvTable 1.3.6.1.4.1.562.2.4.1.114.9.7.4.3.10
This attribute group contains the provisioned attributes relating to PNNI for a PnniInfo component.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniAddrPnniInfoProvEntry

atmIfVptPnniAddrPnniInfoProvEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.4.3.10.1
An entry in the atmIfVptPnniAddrPnniInfoProvTable.
OBJECT-TYPE    
  AtmIfVptPnniAddrPnniInfoProvEntry  

atmIfVptPnniAddrPnniInfoScope 1.3.6.1.4.1.562.2.4.1.114.9.7.4.3.10.1.1
This attribute specifies the scope of the ATM address, which is the highest level up to which this address will be advertised in the PNNI hierarchy. The scope must be set to a value numerically less than or equal to the level of the lowest level peer group containing this node. Setting the scope to 0 will cause the address to be advertised globally within this PNNI routing domain.
OBJECT-TYPE    
  INTEGER -1..104  

atmIfVptPnniAddrPnniInfoReachability 1.3.6.1.4.1.562.2.4.1.114.9.7.4.3.10.1.2
This attribute indicates whether the address is internal or exterior. An internal reachable address is an address of a destination that is directly attached to the logical node advertising the address. An exterior reachable address is an address that can be reached through a PNNI routing domain, but which is not located in that PNNI routing domain.
OBJECT-TYPE    
  INTEGER internal(0), exterior(1)  

atmIfVptPnniAddrOperTable 1.3.6.1.4.1.562.2.4.1.114.9.7.4.10
This attribute group contains the operational attributes for the Address component.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniAddrOperEntry

atmIfVptPnniAddrOperEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.4.10.1
An entry in the atmIfVptPnniAddrOperTable.
OBJECT-TYPE    
  AtmIfVptPnniAddrOperEntry  

atmIfVptPnniAddrScope 1.3.6.1.4.1.562.2.4.1.114.9.7.4.10.1.1
This attribute indicates the scope of the ATM address, which is the highest level to which this address will be advertised in the PNNI hierarchy. If no PnniInfo subcomponent has been provisioned, then the scope will default to the level of this node in the PNNI hierarchy. If this node does not participate in a PNNI hierarchy, then this attribute will have the value of -1.
OBJECT-TYPE    
  INTEGER -1..104  

atmIfVptPnniAddrReachability 1.3.6.1.4.1.562.2.4.1.114.9.7.4.10.1.2
This attribute indicates whether the address is internal or exterior. An internal reachable address is an address of a destination that is directly attached to the logical node advertising the address. An exterior reachable address is an address that can be reached through a PNNI routing domain, but which is not located in that PNNI routing domain.
OBJECT-TYPE    
  INTEGER internal(0), exterior(1)  

atmIfVptPnniProvTable 1.3.6.1.4.1.562.2.4.1.114.9.7.10
This group contains the provisionable attributes for the Pnni component.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniProvEntry

atmIfVptPnniProvEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.10.1
An entry in the atmIfVptPnniProvTable.
OBJECT-TYPE    
  AtmIfVptPnniProvEntry  

atmIfVptPnniSoftPvcRetryPeriod 1.3.6.1.4.1.562.2.4.1.114.9.7.10.1.1
This attribute represents the time in seconds to wait between call setup retries. The resolution is to the nearest 10 seconds. This attribute has been obsoleted and is replaced by the softPvpAndPvcRetryPeriod attribute.
OBJECT-TYPE    
  Unsigned32 20..999999  

atmIfVptPnniSoftPvpAndPvcRetryPeriod 1.3.6.1.4.1.562.2.4.1.114.9.7.10.1.2
This attribute represents the time in seconds to wait between soft PVP or soft PVC call setup retries. The resolution is to the nearest 10 seconds.
OBJECT-TYPE    
  Unsigned32 20..999999  

atmIfVptPnniSoftPvpAndPvcHoldOffTime 1.3.6.1.4.1.562.2.4.1.114.9.7.10.1.5
This attribute specifies how long to hold off retries following a release or the connection. The resolution is to the nearest 50 ms.
OBJECT-TYPE    
  Unsigned32 0 | 50..20000  

atmIfVptPnniAdminWeightsTable 1.3.6.1.4.1.562.2.4.1.114.9.7.11
This group contains the provisionable administrative weights for the Pnni component. These weights will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniAdminWeightsEntry

atmIfVptPnniAdminWeightsEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.11.1
An entry in the atmIfVptPnniAdminWeightsTable.
OBJECT-TYPE    
  AtmIfVptPnniAdminWeightsEntry  

atmIfVptPnniCbrWeight 1.3.6.1.4.1.562.2.4.1.114.9.7.11.1.1
This attribute specifies the administrative weight assigned for setting up switched calls with a service category of Constant Bit Rate (CBR) for this PNNI interface. The value specified will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion; the higher the value, the less desirable the link will be in path selection.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

atmIfVptPnniRtVbrWeight 1.3.6.1.4.1.562.2.4.1.114.9.7.11.1.2
This attribute specifies the administrative weight assigned for setting up switched calls with a service category of Real-Time Variable Bit Rate (RT-VBR) for this PNNI interface. The value specified will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion; the higher the value, the less desirable the link will be in path selection.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

atmIfVptPnniNrtVbrWeight 1.3.6.1.4.1.562.2.4.1.114.9.7.11.1.3
This attribute specifies the administrative weight assigned for setting up switched calls with a service category of Non Real-Time Variable Bit Rate (NRT-VBR) for this PNNI interface. The value specified will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion; the higher the value, the less desirable the link will be in path selection.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

atmIfVptPnniUbrWeight 1.3.6.1.4.1.562.2.4.1.114.9.7.11.1.4
This attribute specifies the administrative weight assigned for setting up switched calls with a service category of Unspecified Bit Rate (UBR) for this PNNI interface. The value specified will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion; the higher the value, the less desirable the link will be in path selection.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

atmIfVptPnniAcctOptTable 1.3.6.1.4.1.562.2.4.1.114.9.7.12
This group contains the provisionable attributes for accounting.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniAcctOptEntry

atmIfVptPnniAcctOptEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.12.1
An entry in the atmIfVptPnniAcctOptTable.
OBJECT-TYPE    
  AtmIfVptPnniAcctOptEntry  

atmIfVptPnniAccountCollection 1.3.6.1.4.1.562.2.4.1.114.9.7.12.1.1
This attribute is used to turn accounting on or off for SVC and SPVC connections. It also specifies the reason(s) for which accounting data is collected: billing, test, study, audit, or force. If the set of reasons is not empty then accounting records will be generated by this interface in the following situations: - on a TODA changeover if TODA is enabled; - every 12 hours (per connection) if TODA is disabled; - on every call clear (a call record with final cell counts). If none of the reasons is present, then accounting will be suppressed. The reason for collection is recorded in the accounting record, in the attribute callingCollectReason or calledCollectReason as appropriate. Description of bits: bill(0) test(1) study(2) audit(3) force(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

atmIfVptPnniAccountConnectionType 1.3.6.1.4.1.562.2.4.1.114.9.7.12.1.2
This attribute specifies whether accounting records generated by this interface should be marked as originating, terminating or intermediate. This attribute, in combination with the direction of the call, determines the value of attribute connPointType of the accounting record and may be used by downstream accounting processes to correlate the records. If the value is origTerm then records generated for incoming calls will be marked as originating and records generated for outgoing calls will be marked as terminating. If the value is intermediate then records generated for all calls will be marked as intermediate.
OBJECT-TYPE    
  INTEGER origTerm(0), intermediate(1)  

atmIfVptPnniAccountClass 1.3.6.1.4.1.562.2.4.1.114.9.7.12.1.3
This attribute specifies the accounting class associated with the interface. Its meaning is determined by the network operator. Its value is simply recorded in the accounting records generated by this interface, in the attribute callingServiceType or calledServiceType as appropriate.
OBJECT-TYPE    
  Unsigned32 0..255  

atmIfVptPnniServiceExchange 1.3.6.1.4.1.562.2.4.1.114.9.7.12.1.4
This attribute specifies the data service exchange associated with this interface. Its meaning is determined by the network operator. Its value is simply recorded in the accounting records generated by this interface, in the attribute callingDse or calledDse as appropriate.
OBJECT-TYPE    
  Unsigned32 0..255  

atmIfVptPnniOperationalTable 1.3.6.1.4.1.562.2.4.1.114.9.7.13
This group contains the operational attributes for a Pnni component.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniOperationalEntry

atmIfVptPnniOperationalEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.13.1
An entry in the atmIfVptPnniOperationalTable.
OBJECT-TYPE    
  AtmIfVptPnniOperationalEntry  

atmIfVptPnniPortId 1.3.6.1.4.1.562.2.4.1.114.9.7.13.1.1
This attribute indicates the port id of the PNNI interface, which is the parent AtmIf's instance number.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

atmIfVptPnniVProvTable 1.3.6.1.4.1.562.2.4.1.114.9.7.14
This group contains the provisionable attributes for the Pnni component which are specific to virtual PNNI interfaces.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfVptPnniVProvEntry

atmIfVptPnniVProvEntry 1.3.6.1.4.1.562.2.4.1.114.9.7.14.1
An entry in the atmIfVptPnniVProvTable.
OBJECT-TYPE    
  AtmIfVptPnniVProvEntry  

atmIfVptPnniVpci 1.3.6.1.4.1.562.2.4.1.114.9.7.14.1.1
This attribute specifies the Virtual Path Connection Identifier (VPCI) to be used between this signalling entity and its peer. The VPCI of the peer virtual PNNI must have the same value for switched connections to be set up across the interface.
OBJECT-TYPE    
  Unsigned32 0..255  

atmIfPnni 1.3.6.1.4.1.562.2.4.1.114.96
OBJECT IDENTIFIER    

atmIfPnniRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.96.1
This entry controls the addition and deletion of atmIfPnni components.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniRowStatusEntry

atmIfPnniRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.96.1.1
A single entry in the table represents a single atmIfPnni component.
OBJECT-TYPE    
  AtmIfPnniRowStatusEntry  

atmIfPnniRowStatus 1.3.6.1.4.1.562.2.4.1.114.96.1.1.1
This variable is used as the basis for SNMP naming of atmIfPnni components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

atmIfPnniComponentName 1.3.6.1.4.1.562.2.4.1.114.96.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

atmIfPnniStorageType 1.3.6.1.4.1.562.2.4.1.114.96.1.1.4
This variable represents the storage type value for the atmIfPnni tables.
OBJECT-TYPE    
  StorageType  

atmIfPnniIndex 1.3.6.1.4.1.562.2.4.1.114.96.1.1.10
This variable represents the index for the atmIfPnni tables.
OBJECT-TYPE    
  NonReplicated  

atmIfPnniSig 1.3.6.1.4.1.562.2.4.1.114.96.2
OBJECT IDENTIFIER    

atmIfPnniSigRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.96.2.1
This entry controls the addition and deletion of atmIfPnniSig components.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniSigRowStatusEntry

atmIfPnniSigRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.96.2.1.1
A single entry in the table represents a single atmIfPnniSig component.
OBJECT-TYPE    
  AtmIfPnniSigRowStatusEntry  

atmIfPnniSigRowStatus 1.3.6.1.4.1.562.2.4.1.114.96.2.1.1.1
This variable is used as the basis for SNMP naming of atmIfPnniSig components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

atmIfPnniSigComponentName 1.3.6.1.4.1.562.2.4.1.114.96.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

atmIfPnniSigStorageType 1.3.6.1.4.1.562.2.4.1.114.96.2.1.1.4
This variable represents the storage type value for the atmIfPnniSig tables.
OBJECT-TYPE    
  StorageType  

atmIfPnniSigIndex 1.3.6.1.4.1.562.2.4.1.114.96.2.1.1.10
This variable represents the index for the atmIfPnniSig tables.
OBJECT-TYPE    
  NonReplicated  

atmIfPnniSigVcd 1.3.6.1.4.1.562.2.4.1.114.96.2.2
OBJECT IDENTIFIER    

atmIfPnniSigVcdRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.96.2.2.1
This entry controls the addition and deletion of atmIfPnniSigVcd components.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniSigVcdRowStatusEntry

atmIfPnniSigVcdRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.96.2.2.1.1
A single entry in the table represents a single atmIfPnniSigVcd component.
OBJECT-TYPE    
  AtmIfPnniSigVcdRowStatusEntry  

atmIfPnniSigVcdRowStatus 1.3.6.1.4.1.562.2.4.1.114.96.2.2.1.1.1
This variable is used as the basis for SNMP naming of atmIfPnniSigVcd components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

atmIfPnniSigVcdComponentName 1.3.6.1.4.1.562.2.4.1.114.96.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

atmIfPnniSigVcdStorageType 1.3.6.1.4.1.562.2.4.1.114.96.2.2.1.1.4
This variable represents the storage type value for the atmIfPnniSigVcd tables.
OBJECT-TYPE    
  StorageType  

atmIfPnniSigVcdIndex 1.3.6.1.4.1.562.2.4.1.114.96.2.2.1.1.10
This variable represents the index for the atmIfPnniSigVcd tables.
OBJECT-TYPE    
  NonReplicated  

atmIfPnniSigVcdProvTable 1.3.6.1.4.1.562.2.4.1.114.96.2.2.10
This group contains the provisionable traffic attributes for a control channel.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniSigVcdProvEntry

atmIfPnniSigVcdProvEntry 1.3.6.1.4.1.562.2.4.1.114.96.2.2.10.1
An entry in the atmIfPnniSigVcdProvTable.
OBJECT-TYPE    
  AtmIfPnniSigVcdProvEntry  

atmIfPnniSigVcdTrafficDescType 1.3.6.1.4.1.562.2.4.1.114.96.2.2.10.1.1
This attribute specifies the type of traffic management which is applied to both the transmit and receive direction of this connection as defined in the ATM Forum. The trafficDescType determines the number and meaning of the parameters in the trafficDescParm attribute.
OBJECT-TYPE    
  INTEGER n3(3), n6(6), n7(7), n8(8)  

atmIfPnniSigVcdAtmServiceCategory 1.3.6.1.4.1.562.2.4.1.114.96.2.2.10.1.3
This attribute specifies the ATM service category for both directions of the connection. The constantBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. The consistent availability of a fixed quantity of bandwidth is considered appropriate for CBR service. Cells which are delayed beyond the value specified by CellTransfer Delay are assumed to be of significantly reduce value to the application. The rtVariableBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. Sources are expected to transmit at a rate which varies with time. Equivalently, the source can be described as 'bursty'. Cells which are delayed beyond the value specified by CTD are assumed to be of significantly reduced value to the application. Real time VBR service may support statistical multiplexing of real time sources. The nrtVariableBitRate service category is intended for non-real time applications which have bursty traffic characteristics and which can be characterized in terms of a PCR, SCR, and MBS. For those cells which are transferred within the traffic contract, the application expects a low cell loss ratio. For all connections, it expects a bound on the mean cell transfer delay. Non-real time VBR service may support statistical multiplexing of connections. The unspecifiedBitRate service is intended for non-real time applications; that is, those not requiring tightly constrained delay and delay variation. UBR sources are expected to be bursty. UBR service supports a high degree of statistical multiplexing among sources. UBR service does not specify traffic related service guarantees. No numerical commitments are made with respect to the cell loss ratio experienced by a UBR connection, or as to the cell transfer delay experienced by cells on the connection.
OBJECT-TYPE    
  INTEGER unspecifiedBitRate(0), constantBitRate(1), rtVariableBitRate(2), nrtVariableBitRate(3)  

atmIfPnniSigVcdQosClass 1.3.6.1.4.1.562.2.4.1.114.96.2.2.10.1.21
This attribute specifies the quality of service for both the forward and backward direction for this connection. Class 1 supports a QOS that meets Service Class A performance requirements (Circuit emulation, constant bit rate video). Class 2 supports a QOS that meets Service Class B performance requirements (Variable bit rate audio and video). Class 3 supports a QOS that meets Service Class C performance requirements (Connection-Oriented Data Transfer). Class 4 supports a QOS that meets Service Class D performance requirements (Connectionless Data Transfer). Class 0 is the unspecified bit rate QOS class; no objective is specified for the performance parameters.
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4)  

atmIfPnniSigVcdTrafficShaping 1.3.6.1.4.1.562.2.4.1.114.96.2.2.10.1.50
This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled.
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

atmIfPnniSigVcdUnshapedTransmitQueueing 1.3.6.1.4.1.562.2.4.1.114.96.2.2.10.1.60
This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this connection if it is unshaped. Refer to the unshapedTransmitQueueing attribute under the AtmIf CA service category subcomponent for more details on the meaning of this attribute. When this attribute is set to sameAsCa, the transmit queueing method for the connection is based on the unshapedTransmitQueueing attribute of the connection's service category component under the ConnectionAdministrator. When this attribute is set to common, transmit traffic on this unshaped connection is destined for the common queue. The value sameAsInterface is for migration from previous software releases, but should no longer be used
OBJECT-TYPE    
  INTEGER common(1), sameAsCa(3)  

atmIfPnniSigVcdUsageParameterControl 1.3.6.1.4.1.562.2.4.1.114.96.2.2.10.1.70
This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface. When sameAsCa is selected, UPC for the connection is based on the usageParameterControl attribute of the connection's service category component under the ConnectionAdministrator. If the service category has UPC enabled, then UPC is enabled for the connection. Note that enabling UPC may have no effect under certain cases. These cases are listed in the description of the usageParameterControl operational attribute, which is under the Vcc Tm or Vpc Tm component. When disabled is selected, UPC for this connection is disabled. The value sameAsInterface is for migration from previous software releases, but should no longer be used
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

atmIfPnniSigVcdTdpTable 1.3.6.1.4.1.562.2.4.1.114.96.2.2.387
This attribute is a vector of five traffic parameters whose meanings are defined by the trafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR) and requested shaping rate are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. CDVT is expressed in microseconds. The values of PCR, SCR, MBS and CDVT are used for connection admission control (CAC). The value of CDVT is only used for connections where the atmServiceCategory is constantBitRate. For all other values of atmServiceCategory, CDVT is ignored. The values of PCR, SCR and requested shaping rate are used to determine the actual shaping rate where traffic shaping is enabled. When trafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3 must be zero. When trafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. Whenever it is valid for PCR to be specified, parameter 5 may also be used to specify a requested shaping rate. A non-zero value in parameter 5 overrides the value in parameter 1 and is used as the peak cell rate in calculations of CAC and shaping rate. For trafficDescType 3 the traffic is shaped at the next rate less than the PCR. For trafficDescType 6, 7, and 8, the traffic is shaped at the highest available rate which is between PCR and SCR. However, if there is no available shaping rate between PCR and SCR, traffic is shaped at the next rate above the PCR.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniSigVcdTdpEntry

atmIfPnniSigVcdTdpEntry 1.3.6.1.4.1.562.2.4.1.114.96.2.2.387.1
An entry in the atmIfPnniSigVcdTdpTable.
OBJECT-TYPE    
  AtmIfPnniSigVcdTdpEntry  

atmIfPnniSigVcdTdpIndex 1.3.6.1.4.1.562.2.4.1.114.96.2.2.387.1.1
This variable represents the atmIfPnniSigVcdTdpTable specific index for the atmIfPnniSigVcdTdpTable.
OBJECT-TYPE    
  Integer32 1..5  

atmIfPnniSigVcdTdpValue 1.3.6.1.4.1.562.2.4.1.114.96.2.2.387.1.2
This variable represents an individual value for the atmIfPnniSigVcdTdpTable.
OBJECT-TYPE    
  Unsigned32 0..2147483647  

atmIfPnniSigProvTable 1.3.6.1.4.1.562.2.4.1.114.96.2.10
This attribute group contains the provisionable attributes for the Signalling component.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniSigProvEntry

atmIfPnniSigProvEntry 1.3.6.1.4.1.562.2.4.1.114.96.2.10.1
An entry in the atmIfPnniSigProvTable.
OBJECT-TYPE    
  AtmIfPnniSigProvEntry  

atmIfPnniSigVci 1.3.6.1.4.1.562.2.4.1.114.96.2.10.1.1
This attribute specifies the signalling channel number.
OBJECT-TYPE    
  Unsigned32 0..65535  

atmIfPnniSigAddressConversion 1.3.6.1.4.1.562.2.4.1.114.96.2.10.1.2
This attribute specifies the address conversion on the outgoing signalling PDUs. The options are none, nativeE164, or nsap. The none option is the default and if this option is chosen then nothing is done to the address information element (IE) in the outgoing signalling message. If nativeE164 option is chosen, then only NSAP encapsulated E.164 addresses with zeros in the ESI are converted to native E.164 format in the outgoing signalling message. If the NSAP address is not encapsulated E.164 or the ESI field is not zeros and the nativeE164 option is chosen, then the call is cleared. If the nsap option is chosen, then native E.164 addresses are converted to NSAP E.164 with zeros in the ESI field; otherwise the address is in NSAP format and is not changed.
OBJECT-TYPE    
  INTEGER none(0), nativeE164(1), nsap(2)  

atmIfPnniSigStateTable 1.3.6.1.4.1.562.2.4.1.114.96.2.11
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniSigStateEntry

atmIfPnniSigStateEntry 1.3.6.1.4.1.562.2.4.1.114.96.2.11.1
An entry in the atmIfPnniSigStateTable.
OBJECT-TYPE    
  AtmIfPnniSigStateEntry  

atmIfPnniSigAdminState 1.3.6.1.4.1.562.2.4.1.114.96.2.11.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

atmIfPnniSigOperationalState 1.3.6.1.4.1.562.2.4.1.114.96.2.11.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

atmIfPnniSigUsageState 1.3.6.1.4.1.562.2.4.1.114.96.2.11.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

atmIfPnniSigOperTable 1.3.6.1.4.1.562.2.4.1.114.96.2.12
This attribute contains the operational attributes for the AtmSignalling component.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniSigOperEntry

atmIfPnniSigOperEntry 1.3.6.1.4.1.562.2.4.1.114.96.2.12.1
An entry in the atmIfPnniSigOperTable.
OBJECT-TYPE    
  AtmIfPnniSigOperEntry  

atmIfPnniSigLastTxCauseCode 1.3.6.1.4.1.562.2.4.1.114.96.2.12.1.1
This attribute indicates the cause code in the last transmitted signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages.
OBJECT-TYPE    
  Unsigned32 0..255  

atmIfPnniSigLastTxDiagCode 1.3.6.1.4.1.562.2.4.1.114.96.2.12.1.2
This attribute contains the diagnostic code in the last transmitted signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0.
OBJECT-TYPE    
  Hex 0..255  

atmIfPnniSigLastRxCauseCode 1.3.6.1.4.1.562.2.4.1.114.96.2.12.1.3
This attribute contains the cause code in the last received signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages.
OBJECT-TYPE    
  Unsigned32 0..255  

atmIfPnniSigLastRxDiagCode 1.3.6.1.4.1.562.2.4.1.114.96.2.12.1.4
This attribute contains the diagnostic code in the last received signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0.
OBJECT-TYPE    
  Hex 0..255  

atmIfPnniSigStatsTable 1.3.6.1.4.1.562.2.4.1.114.96.2.13
This attribute group contains the statistics associated with the AtmSignalling component.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniSigStatsEntry

atmIfPnniSigStatsEntry 1.3.6.1.4.1.562.2.4.1.114.96.2.13.1
An entry in the atmIfPnniSigStatsTable.
OBJECT-TYPE    
  AtmIfPnniSigStatsEntry  

atmIfPnniSigCurrentConnections 1.3.6.1.4.1.562.2.4.1.114.96.2.13.1.1
This attribute indicates the total number of currently active connections.
OBJECT-TYPE    
  Counter32  

atmIfPnniSigPeakConnections 1.3.6.1.4.1.562.2.4.1.114.96.2.13.1.2
This attribute indicates the high water mark of active point-to- point and point-to-multipoint connections.
OBJECT-TYPE    
  Gauge32 0..4294967295  

atmIfPnniSigSuccessfulConnections 1.3.6.1.4.1.562.2.4.1.114.96.2.13.1.3
This attribute counts the total number of switched point-to- point and point-to-multipoint connections that were successfully established. The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

atmIfPnniSigFailedConnections 1.3.6.1.4.1.562.2.4.1.114.96.2.13.1.4
This attribute counts the total number of switched connections that were not successfully established.The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

atmIfPnniSigTxPdus 1.3.6.1.4.1.562.2.4.1.114.96.2.13.1.5
This attribute counts the number of transmitted signalling PDUs.The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

atmIfPnniSigRxPdus 1.3.6.1.4.1.562.2.4.1.114.96.2.13.1.6
This attribute counts the number of received signalling PDUs.The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

atmIfPnniSigCurrentPmpConnections 1.3.6.1.4.1.562.2.4.1.114.96.2.13.1.7
This attribute indicates the number of currently active point-to- multipoint connections.
OBJECT-TYPE    
  Gauge32 0..4294967295  

atmIfPnniSigPeakPmpConnections 1.3.6.1.4.1.562.2.4.1.114.96.2.13.1.8
This attribute indicates the high water mark of active point-to- multipoint connections.
OBJECT-TYPE    
  Gauge32 0..4294967295  

atmIfPnniSigSuccessfulPmpConnections 1.3.6.1.4.1.562.2.4.1.114.96.2.13.1.9
This attribute counts the total number of switched point-to- multipoint connections that were successfully established. The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

atmIfPnniSigFailedPmpConnections 1.3.6.1.4.1.562.2.4.1.114.96.2.13.1.10
This attribute counts the number of switched point-to- multipoint connections that were not successfully established.The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

atmIfPnniSigNewCurrentConnections 1.3.6.1.4.1.562.2.4.1.114.96.2.13.1.11
This attribute indicates the total number of currently active point-to- point and point-to-multipoint connections.
OBJECT-TYPE    
  Gauge32 0..4294967295  

atmIfPnniRcc 1.3.6.1.4.1.562.2.4.1.114.96.3
OBJECT IDENTIFIER    

atmIfPnniRccRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.96.3.1
This entry controls the addition and deletion of atmIfPnniRcc components.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniRccRowStatusEntry

atmIfPnniRccRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.96.3.1.1
A single entry in the table represents a single atmIfPnniRcc component.
OBJECT-TYPE    
  AtmIfPnniRccRowStatusEntry  

atmIfPnniRccRowStatus 1.3.6.1.4.1.562.2.4.1.114.96.3.1.1.1
This variable is used as the basis for SNMP naming of atmIfPnniRcc components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

atmIfPnniRccComponentName 1.3.6.1.4.1.562.2.4.1.114.96.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

atmIfPnniRccStorageType 1.3.6.1.4.1.562.2.4.1.114.96.3.1.1.4
This variable represents the storage type value for the atmIfPnniRcc tables.
OBJECT-TYPE    
  StorageType  

atmIfPnniRccIndex 1.3.6.1.4.1.562.2.4.1.114.96.3.1.1.10
This variable represents the index for the atmIfPnniRcc tables.
OBJECT-TYPE    
  NonReplicated  

atmIfPnniRccVcd 1.3.6.1.4.1.562.2.4.1.114.96.3.2
OBJECT IDENTIFIER    

atmIfPnniRccVcdRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.96.3.2.1
This entry controls the addition and deletion of atmIfPnniRccVcd components.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniRccVcdRowStatusEntry

atmIfPnniRccVcdRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.96.3.2.1.1
A single entry in the table represents a single atmIfPnniRccVcd component.
OBJECT-TYPE    
  AtmIfPnniRccVcdRowStatusEntry  

atmIfPnniRccVcdRowStatus 1.3.6.1.4.1.562.2.4.1.114.96.3.2.1.1.1
This variable is used as the basis for SNMP naming of atmIfPnniRccVcd components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

atmIfPnniRccVcdComponentName 1.3.6.1.4.1.562.2.4.1.114.96.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

atmIfPnniRccVcdStorageType 1.3.6.1.4.1.562.2.4.1.114.96.3.2.1.1.4
This variable represents the storage type value for the atmIfPnniRccVcd tables.
OBJECT-TYPE    
  StorageType  

atmIfPnniRccVcdIndex 1.3.6.1.4.1.562.2.4.1.114.96.3.2.1.1.10
This variable represents the index for the atmIfPnniRccVcd tables.
OBJECT-TYPE    
  NonReplicated  

atmIfPnniRccVcdProvTable 1.3.6.1.4.1.562.2.4.1.114.96.3.2.10
This group contains the provisionable traffic attributes for a control channel.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniRccVcdProvEntry

atmIfPnniRccVcdProvEntry 1.3.6.1.4.1.562.2.4.1.114.96.3.2.10.1
An entry in the atmIfPnniRccVcdProvTable.
OBJECT-TYPE    
  AtmIfPnniRccVcdProvEntry  

atmIfPnniRccVcdTrafficDescType 1.3.6.1.4.1.562.2.4.1.114.96.3.2.10.1.1
This attribute specifies the type of traffic management which is applied to both the transmit and receive direction of this connection as defined in the ATM Forum. The trafficDescType determines the number and meaning of the parameters in the trafficDescParm attribute.
OBJECT-TYPE    
  INTEGER n3(3), n6(6), n7(7), n8(8)  

atmIfPnniRccVcdAtmServiceCategory 1.3.6.1.4.1.562.2.4.1.114.96.3.2.10.1.3
This attribute specifies the ATM service category for both directions of the connection. The constantBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. The consistent availability of a fixed quantity of bandwidth is considered appropriate for CBR service. Cells which are delayed beyond the value specified by CellTransfer Delay are assumed to be of significantly reduce value to the application. The rtVariableBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. Sources are expected to transmit at a rate which varies with time. Equivalently, the source can be described as 'bursty'. Cells which are delayed beyond the value specified by CTD are assumed to be of significantly reduced value to the application. Real time VBR service may support statistical multiplexing of real time sources. The nrtVariableBitRate service category is intended for non-real time applications which have bursty traffic characteristics and which can be characterized in terms of a PCR, SCR, and MBS. For those cells which are transferred within the traffic contract, the application expects a low cell loss ratio. For all connections, it expects a bound on the mean cell transfer delay. Non-real time VBR service may support statistical multiplexing of connections. The unspecifiedBitRate service is intended for non-real time applications; that is, those not requiring tightly constrained delay and delay variation. UBR sources are expected to be bursty. UBR service supports a high degree of statistical multiplexing among sources. UBR service does not specify traffic related service guarantees. No numerical commitments are made with respect to the cell loss ratio experienced by a UBR connection, or as to the cell transfer delay experienced by cells on the connection.
OBJECT-TYPE    
  INTEGER unspecifiedBitRate(0), constantBitRate(1), rtVariableBitRate(2), nrtVariableBitRate(3)  

atmIfPnniRccVcdQosClass 1.3.6.1.4.1.562.2.4.1.114.96.3.2.10.1.21
This attribute specifies the quality of service for both the forward and backward direction for this connection. Class 1 supports a QOS that meets Service Class A performance requirements (Circuit emulation, constant bit rate video). Class 2 supports a QOS that meets Service Class B performance requirements (Variable bit rate audio and video). Class 3 supports a QOS that meets Service Class C performance requirements (Connection-Oriented Data Transfer). Class 4 supports a QOS that meets Service Class D performance requirements (Connectionless Data Transfer). Class 0 is the unspecified bit rate QOS class; no objective is specified for the performance parameters.
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4)  

atmIfPnniRccVcdTrafficShaping 1.3.6.1.4.1.562.2.4.1.114.96.3.2.10.1.50
This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled.
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

atmIfPnniRccVcdUnshapedTransmitQueueing 1.3.6.1.4.1.562.2.4.1.114.96.3.2.10.1.60
This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this connection if it is unshaped. Refer to the unshapedTransmitQueueing attribute under the AtmIf CA service category subcomponent for more details on the meaning of this attribute. When this attribute is set to sameAsCa, the transmit queueing method for the connection is based on the unshapedTransmitQueueing attribute of the connection's service category component under the ConnectionAdministrator. When this attribute is set to common, transmit traffic on this unshaped connection is destined for the common queue. The value sameAsInterface is for migration from previous software releases, but should no longer be used
OBJECT-TYPE    
  INTEGER common(1), sameAsCa(3)  

atmIfPnniRccVcdUsageParameterControl 1.3.6.1.4.1.562.2.4.1.114.96.3.2.10.1.70
This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface. When sameAsCa is selected, UPC for the connection is based on the usageParameterControl attribute of the connection's service category component under the ConnectionAdministrator. If the service category has UPC enabled, then UPC is enabled for the connection. Note that enabling UPC may have no effect under certain cases. These cases are listed in the description of the usageParameterControl operational attribute, which is under the Vcc Tm or Vpc Tm component. When disabled is selected, UPC for this connection is disabled. The value sameAsInterface is for migration from previous software releases, but should no longer be used
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

atmIfPnniRccVcdTdpTable 1.3.6.1.4.1.562.2.4.1.114.96.3.2.387
This attribute is a vector of five traffic parameters whose meanings are defined by the trafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR) and requested shaping rate are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. CDVT is expressed in microseconds. The values of PCR, SCR, MBS and CDVT are used for connection admission control (CAC). The value of CDVT is only used for connections where the atmServiceCategory is constantBitRate. For all other values of atmServiceCategory, CDVT is ignored. The values of PCR, SCR and requested shaping rate are used to determine the actual shaping rate where traffic shaping is enabled. When trafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3 must be zero. When trafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. Whenever it is valid for PCR to be specified, parameter 5 may also be used to specify a requested shaping rate. A non-zero value in parameter 5 overrides the value in parameter 1 and is used as the peak cell rate in calculations of CAC and shaping rate. For trafficDescType 3 the traffic is shaped at the next rate less than the PCR. For trafficDescType 6, 7, and 8, the traffic is shaped at the highest available rate which is between PCR and SCR. However, if there is no available shaping rate between PCR and SCR, traffic is shaped at the next rate above the PCR.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniRccVcdTdpEntry

atmIfPnniRccVcdTdpEntry 1.3.6.1.4.1.562.2.4.1.114.96.3.2.387.1
An entry in the atmIfPnniRccVcdTdpTable.
OBJECT-TYPE    
  AtmIfPnniRccVcdTdpEntry  

atmIfPnniRccVcdTdpIndex 1.3.6.1.4.1.562.2.4.1.114.96.3.2.387.1.1
This variable represents the atmIfPnniRccVcdTdpTable specific index for the atmIfPnniRccVcdTdpTable.
OBJECT-TYPE    
  Integer32 1..5  

atmIfPnniRccVcdTdpValue 1.3.6.1.4.1.562.2.4.1.114.96.3.2.387.1.2
This variable represents an individual value for the atmIfPnniRccVcdTdpTable.
OBJECT-TYPE    
  Unsigned32 0..2147483647  

atmIfPnniRccProvTable 1.3.6.1.4.1.562.2.4.1.114.96.3.10
This group contains the generic provisionable attributes of an Rcc component.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniRccProvEntry

atmIfPnniRccProvEntry 1.3.6.1.4.1.562.2.4.1.114.96.3.10.1
An entry in the atmIfPnniRccProvTable.
OBJECT-TYPE    
  AtmIfPnniRccProvEntry  

atmIfPnniRccVci 1.3.6.1.4.1.562.2.4.1.114.96.3.10.1.1
This attribute specifies the VCI for the Routing Control Channel (RCC). It is not recommended that the value be changed from the default of 18 unless absolutely necessary. If a different VCI is specified, ensure that the RCC at the far end is provisioned to use the same VCI, otherwise the RCC will not come up.
OBJECT-TYPE    
  Unsigned32 0..65535  

atmIfPnniRccHlParmsTable 1.3.6.1.4.1.562.2.4.1.114.96.3.11
This group contains the provisionable Hello protocol parameters for an Rcc component.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniRccHlParmsEntry

atmIfPnniRccHlParmsEntry 1.3.6.1.4.1.562.2.4.1.114.96.3.11.1
An entry in the atmIfPnniRccHlParmsTable.
OBJECT-TYPE    
  AtmIfPnniRccHlParmsEntry  

atmIfPnniRccHelloHoldDown 1.3.6.1.4.1.562.2.4.1.114.96.3.11.1.1
This attribute is used to limit the rate at which this node sends out Hello packets. Specifically, it specifies the minimum time between successive Hellos. A value of 0 specifies that the value provisioned for the helloHoldDown attribute of the ARtg Pnni component should be used.
OBJECT-TYPE    
  FixedPoint1 0..655350  

atmIfPnniRccHelloInterval 1.3.6.1.4.1.562.2.4.1.114.96.3.11.1.2
This attribute specifies the duration of the Hello Timer. Every helloInterval seconds, this node will send out a Hello packet to the neighbor node, subject to the helloHoldDown timer having expired at least once since the last Hello packet was sent. A value of 0 specifies that the value provisioned for the helloInterval attribute of the ARtg Pnni component should be used.
OBJECT-TYPE    
  Unsigned32 0..65535  

atmIfPnniRccHelloInactivityFactor 1.3.6.1.4.1.562.2.4.1.114.96.3.11.1.3
This attribute specifies the number of Hello intervals allowed to pass without receiving a Hello from the neighbor node, before an attempt is made to re-stage. The hello inactivity timer is enabled in the oneWayInside, twoWayInside, oneWayOutside, twoWayOutside and commonOutside hello states (see the helloState attribute on the Rcc component for a description of these states). Note that the value for the Hello interval used in the calculation is the one specified in the Hello packet from the neighbor node. A value of 0 specifies that the value provisioned for the helloInactivityFactor attribute of the ARtg Pnni component should be used. DESCRIPTION
OBJECT-TYPE    
  Unsigned32 0..65535  

atmIfPnniRccStateTable 1.3.6.1.4.1.562.2.4.1.114.96.3.12
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniRccStateEntry

atmIfPnniRccStateEntry 1.3.6.1.4.1.562.2.4.1.114.96.3.12.1
An entry in the atmIfPnniRccStateTable.
OBJECT-TYPE    
  AtmIfPnniRccStateEntry  

atmIfPnniRccAdminState 1.3.6.1.4.1.562.2.4.1.114.96.3.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

atmIfPnniRccOperationalState 1.3.6.1.4.1.562.2.4.1.114.96.3.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

atmIfPnniRccUsageState 1.3.6.1.4.1.562.2.4.1.114.96.3.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

atmIfPnniRccOperTable 1.3.6.1.4.1.562.2.4.1.114.96.3.13
This group contains the operational attributes for an Rcc component.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniRccOperEntry

atmIfPnniRccOperEntry 1.3.6.1.4.1.562.2.4.1.114.96.3.13.1
An entry in the atmIfPnniRccOperTable.
OBJECT-TYPE    
  AtmIfPnniRccOperEntry  

atmIfPnniRccType 1.3.6.1.4.1.562.2.4.1.114.96.3.13.1.1
This attribute indicates the role of this link in the PNNI hierarchy. The following values are possible: unknown: the Hello protocol has not yet determined the role of the link. lowestLevelHorizLink: the link is a horizontal link between two lowest level nodes. lowestLevelOutsideLink: the link is an outside link between two border nodes. horizontalLinkToLgn: the link is a horizontal link to a Logical Group Node (LGN). uplink: the link is a uplink to a higher level LGN.
OBJECT-TYPE    
  INTEGER unknown(0), lowestLevelHorizLink(1), lowestLevelOutsideLink(2), horizontalLinkToLGN(3), uplink(4)  

atmIfPnniRccNegotiatedVersion 1.3.6.1.4.1.562.2.4.1.114.96.3.13.1.2
This attribute indicates the PNNI version negotiated with the neighbor node.
OBJECT-TYPE    
  INTEGER unsupported(0), version1point0(1)  

atmIfPnniRccHelloState 1.3.6.1.4.1.562.2.4.1.114.96.3.13.1.3
This attribute indicates the state of the Hello protocol exchange over this link. The following are the possible values for this attribute: down: the link is down; no PNNI routing packets will be sent over or received over such a link. This is the initial state of the Hello Finite State Machine, and can also be reached when lower-level protocols have indicated that the link is not usable. attempt: no Hello packets or Hello packets, with mismatch information, have been received recently from the neighbor. Attempts are made to contact the neighbor node by sending out Hello packets every helloInterval seconds. oneWayInside: Hello packets have been recently received from the neighbor and it has been established that both nodes are members of the same peer group, but the remote node ID and remote port ID in the neighbor's Hello packets were set to zero. A Hello packet is sent to the neighbor and the Hello timer is restarted. twoWayInside: Bidirectional communication over this link between this node and the neighbor node has been achieved. oneWayOutside: Hello packets have been recently received from the neighbor and it has been established that both nodes are members of a different peer group, but the remote node ID and remote port ID in the neighbor's Hello packets were set to zero. twoWayOutside: Hellos have recently been received from the neighbor indicating that the neighbor node belongs to a different peer group. The correct remote node ID and remote port ID fields were included in the Hello packet, but the nodal hierarchy list did not include any common peer group. This state can also be reached if a hierarchy mismatch occurs while in the commonOutside state. commonOutside: A common level of the routing hierarchy has been found, in addition to achieving full bi-directional communication between the two nodes.
OBJECT-TYPE    
  INTEGER notApplicable(0), down(1), attempt(2), oneWayInside(3), twoWayInside(4), oneWayOutside(5), twoWayOutside(6), commonOutside(7)  

atmIfPnniRccRemoteNodeId 1.3.6.1.4.1.562.2.4.1.114.96.3.13.1.4
This attribute indicates the neighbor node's node id.
OBJECT-TYPE    
  HexString SIZE(22)  

atmIfPnniRccRemotePortId 1.3.6.1.4.1.562.2.4.1.114.96.3.13.1.5
This attribute indicates the neighbor node's port id.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

atmIfPnniRccStatsTable 1.3.6.1.4.1.562.2.4.1.114.96.3.14
This group contains the statistical attributes for an Rcc component.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniRccStatsEntry

atmIfPnniRccStatsEntry 1.3.6.1.4.1.562.2.4.1.114.96.3.14.1
An entry in the atmIfPnniRccStatsTable.
OBJECT-TYPE    
  AtmIfPnniRccStatsEntry  

atmIfPnniRccHelloPacketsRx 1.3.6.1.4.1.562.2.4.1.114.96.3.14.1.1
This attribute counts the total number of Hello packets received across this RCC, including bad and mismatched Hello packets. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

atmIfPnniRccHelloPacketsTx 1.3.6.1.4.1.562.2.4.1.114.96.3.14.1.2
This attribute counts the total number of Hello packets transmitted across this RCC. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

atmIfPnniRccMismatchedHelloPacketsRx 1.3.6.1.4.1.562.2.4.1.114.96.3.14.1.3
This attribute counts the total number of mismatched Hello packets received over this RCC. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

atmIfPnniRccBadHelloPacketsRx 1.3.6.1.4.1.562.2.4.1.114.96.3.14.1.4
This attribute counts the total number of bad Hello packets received over this RCC. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

atmIfPnniAddr 1.3.6.1.4.1.562.2.4.1.114.96.4
OBJECT IDENTIFIER    

atmIfPnniAddrRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.96.4.1
This entry controls the addition and deletion of atmIfPnniAddr components.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniAddrRowStatusEntry

atmIfPnniAddrRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.96.4.1.1
A single entry in the table represents a single atmIfPnniAddr component.
OBJECT-TYPE    
  AtmIfPnniAddrRowStatusEntry  

atmIfPnniAddrRowStatus 1.3.6.1.4.1.562.2.4.1.114.96.4.1.1.1
This variable is used as the basis for SNMP naming of atmIfPnniAddr components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

atmIfPnniAddrComponentName 1.3.6.1.4.1.562.2.4.1.114.96.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

atmIfPnniAddrStorageType 1.3.6.1.4.1.562.2.4.1.114.96.4.1.1.4
This variable represents the storage type value for the atmIfPnniAddr tables.
OBJECT-TYPE    
  StorageType  

atmIfPnniAddrAddressIndex 1.3.6.1.4.1.562.2.4.1.114.96.4.1.1.10
This variable represents an index for the atmIfPnniAddr tables.
OBJECT-TYPE    
  AsciiStringIndex SIZE(1..40)  

atmIfPnniAddrAddressTypeIndex 1.3.6.1.4.1.562.2.4.1.114.96.4.1.1.11
This variable represents an index for the atmIfPnniAddr tables.
OBJECT-TYPE    
  INTEGER primary(0), alternate(1), registered(2), default(3)  

atmIfPnniAddrTermSP 1.3.6.1.4.1.562.2.4.1.114.96.4.2
OBJECT IDENTIFIER    

atmIfPnniAddrTermSPRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.96.4.2.1
This entry controls the addition and deletion of atmIfPnniAddrTermSP components.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniAddrTermSPRowStatusEntry

atmIfPnniAddrTermSPRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.96.4.2.1.1
A single entry in the table represents a single atmIfPnniAddrTermSP component.
OBJECT-TYPE    
  AtmIfPnniAddrTermSPRowStatusEntry  

atmIfPnniAddrTermSPRowStatus 1.3.6.1.4.1.562.2.4.1.114.96.4.2.1.1.1
This variable is used as the basis for SNMP naming of atmIfPnniAddrTermSP components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

atmIfPnniAddrTermSPComponentName 1.3.6.1.4.1.562.2.4.1.114.96.4.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

atmIfPnniAddrTermSPStorageType 1.3.6.1.4.1.562.2.4.1.114.96.4.2.1.1.4
This variable represents the storage type value for the atmIfPnniAddrTermSP tables.
OBJECT-TYPE    
  StorageType  

atmIfPnniAddrTermSPIndex 1.3.6.1.4.1.562.2.4.1.114.96.4.2.1.1.10
This variable represents the index for the atmIfPnniAddrTermSP tables.
OBJECT-TYPE    
  NonReplicated  

atmIfPnniAddrPnniInfo 1.3.6.1.4.1.562.2.4.1.114.96.4.3
OBJECT IDENTIFIER    

atmIfPnniAddrPnniInfoRowStatusTable 1.3.6.1.4.1.562.2.4.1.114.96.4.3.1
This entry controls the addition and deletion of atmIfPnniAddrPnniInfo components.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniAddrPnniInfoRowStatusEntry

atmIfPnniAddrPnniInfoRowStatusEntry 1.3.6.1.4.1.562.2.4.1.114.96.4.3.1.1
A single entry in the table represents a single atmIfPnniAddrPnniInfo component.
OBJECT-TYPE    
  AtmIfPnniAddrPnniInfoRowStatusEntry  

atmIfPnniAddrPnniInfoRowStatus 1.3.6.1.4.1.562.2.4.1.114.96.4.3.1.1.1
This variable is used as the basis for SNMP naming of atmIfPnniAddrPnniInfo components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

atmIfPnniAddrPnniInfoComponentName 1.3.6.1.4.1.562.2.4.1.114.96.4.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

atmIfPnniAddrPnniInfoStorageType 1.3.6.1.4.1.562.2.4.1.114.96.4.3.1.1.4
This variable represents the storage type value for the atmIfPnniAddrPnniInfo tables.
OBJECT-TYPE    
  StorageType  

atmIfPnniAddrPnniInfoIndex 1.3.6.1.4.1.562.2.4.1.114.96.4.3.1.1.10
This variable represents the index for the atmIfPnniAddrPnniInfo tables.
OBJECT-TYPE    
  NonReplicated  

atmIfPnniAddrPnniInfoProvTable 1.3.6.1.4.1.562.2.4.1.114.96.4.3.10
This attribute group contains the provisioned attributes relating to PNNI for a PnniInfo component.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniAddrPnniInfoProvEntry

atmIfPnniAddrPnniInfoProvEntry 1.3.6.1.4.1.562.2.4.1.114.96.4.3.10.1
An entry in the atmIfPnniAddrPnniInfoProvTable.
OBJECT-TYPE    
  AtmIfPnniAddrPnniInfoProvEntry  

atmIfPnniAddrPnniInfoScope 1.3.6.1.4.1.562.2.4.1.114.96.4.3.10.1.1
This attribute specifies the scope of the ATM address, which is the highest level up to which this address will be advertised in the PNNI hierarchy. The scope must be set to a value numerically less than or equal to the level of the lowest level peer group containing this node. Setting the scope to 0 will cause the address to be advertised globally within this PNNI routing domain.
OBJECT-TYPE    
  INTEGER -1..104  

atmIfPnniAddrPnniInfoReachability 1.3.6.1.4.1.562.2.4.1.114.96.4.3.10.1.2
This attribute indicates whether the address is internal or exterior. An internal reachable address is an address of a destination that is directly attached to the logical node advertising the address. An exterior reachable address is an address that can be reached through a PNNI routing domain, but which is not located in that PNNI routing domain.
OBJECT-TYPE    
  INTEGER internal(0), exterior(1)  

atmIfPnniAddrOperTable 1.3.6.1.4.1.562.2.4.1.114.96.4.10
This attribute group contains the operational attributes for the Address component.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniAddrOperEntry

atmIfPnniAddrOperEntry 1.3.6.1.4.1.562.2.4.1.114.96.4.10.1
An entry in the atmIfPnniAddrOperTable.
OBJECT-TYPE    
  AtmIfPnniAddrOperEntry  

atmIfPnniAddrScope 1.3.6.1.4.1.562.2.4.1.114.96.4.10.1.1
This attribute indicates the scope of the ATM address, which is the highest level to which this address will be advertised in the PNNI hierarchy. If no PnniInfo subcomponent has been provisioned, then the scope will default to the level of this node in the PNNI hierarchy. If this node does not participate in a PNNI hierarchy, then this attribute will have the value of -1.
OBJECT-TYPE    
  INTEGER -1..104  

atmIfPnniAddrReachability 1.3.6.1.4.1.562.2.4.1.114.96.4.10.1.2
This attribute indicates whether the address is internal or exterior. An internal reachable address is an address of a destination that is directly attached to the logical node advertising the address. An exterior reachable address is an address that can be reached through a PNNI routing domain, but which is not located in that PNNI routing domain.
OBJECT-TYPE    
  INTEGER internal(0), exterior(1)  

atmIfPnniProvTable 1.3.6.1.4.1.562.2.4.1.114.96.10
This group contains the provisionable attributes for the Pnni component.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniProvEntry

atmIfPnniProvEntry 1.3.6.1.4.1.562.2.4.1.114.96.10.1
An entry in the atmIfPnniProvTable.
OBJECT-TYPE    
  AtmIfPnniProvEntry  

atmIfPnniSoftPvcRetryPeriod 1.3.6.1.4.1.562.2.4.1.114.96.10.1.1
This attribute represents the time in seconds to wait between call setup retries. The resolution is to the nearest 10 seconds. This attribute has been obsoleted and is replaced by the softPvpAndPvcRetryPeriod attribute.
OBJECT-TYPE    
  Unsigned32 20..999999  

atmIfPnniSoftPvpAndPvcRetryPeriod 1.3.6.1.4.1.562.2.4.1.114.96.10.1.2
This attribute represents the time in seconds to wait between soft PVP or soft PVC call setup retries. The resolution is to the nearest 10 seconds.
OBJECT-TYPE    
  Unsigned32 20..999999  

atmIfPnniSoftPvpAndPvcHoldOffTime 1.3.6.1.4.1.562.2.4.1.114.96.10.1.5
This attribute specifies how long to hold off retries following a release or the connection. The resolution is to the nearest 50 ms.
OBJECT-TYPE    
  Unsigned32 0 | 50..20000  

atmIfPnniAdminWeightsTable 1.3.6.1.4.1.562.2.4.1.114.96.11
This group contains the provisionable administrative weights for the Pnni component. These weights will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniAdminWeightsEntry

atmIfPnniAdminWeightsEntry 1.3.6.1.4.1.562.2.4.1.114.96.11.1
An entry in the atmIfPnniAdminWeightsTable.
OBJECT-TYPE    
  AtmIfPnniAdminWeightsEntry  

atmIfPnniCbrWeight 1.3.6.1.4.1.562.2.4.1.114.96.11.1.1
This attribute specifies the administrative weight assigned for setting up switched calls with a service category of Constant Bit Rate (CBR) for this PNNI interface. The value specified will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion; the higher the value, the less desirable the link will be in path selection.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

atmIfPnniRtVbrWeight 1.3.6.1.4.1.562.2.4.1.114.96.11.1.2
This attribute specifies the administrative weight assigned for setting up switched calls with a service category of Real-Time Variable Bit Rate (RT-VBR) for this PNNI interface. The value specified will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion; the higher the value, the less desirable the link will be in path selection.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

atmIfPnniNrtVbrWeight 1.3.6.1.4.1.562.2.4.1.114.96.11.1.3
This attribute specifies the administrative weight assigned for setting up switched calls with a service category of Non Real-Time Variable Bit Rate (NRT-VBR) for this PNNI interface. The value specified will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion; the higher the value, the less desirable the link will be in path selection.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

atmIfPnniUbrWeight 1.3.6.1.4.1.562.2.4.1.114.96.11.1.4
This attribute specifies the administrative weight assigned for setting up switched calls with a service category of Unspecified Bit Rate (UBR) for this PNNI interface. The value specified will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion; the higher the value, the less desirable the link will be in path selection.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

atmIfPnniAcctOptTable 1.3.6.1.4.1.562.2.4.1.114.96.12
This group contains the provisionable attributes for accounting.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniAcctOptEntry

atmIfPnniAcctOptEntry 1.3.6.1.4.1.562.2.4.1.114.96.12.1
An entry in the atmIfPnniAcctOptTable.
OBJECT-TYPE    
  AtmIfPnniAcctOptEntry  

atmIfPnniAccountCollection 1.3.6.1.4.1.562.2.4.1.114.96.12.1.1
This attribute is used to turn accounting on or off for SVC and SPVC connections. It also specifies the reason(s) for which accounting data is collected: billing, test, study, audit, or force. If the set of reasons is not empty then accounting records will be generated by this interface in the following situations: - on a TODA changeover if TODA is enabled; - every 12 hours (per connection) if TODA is disabled; - on every call clear (a call record with final cell counts). If none of the reasons is present, then accounting will be suppressed. The reason for collection is recorded in the accounting record, in the attribute callingCollectReason or calledCollectReason as appropriate. Description of bits: bill(0) test(1) study(2) audit(3) force(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

atmIfPnniAccountConnectionType 1.3.6.1.4.1.562.2.4.1.114.96.12.1.2
This attribute specifies whether accounting records generated by this interface should be marked as originating, terminating or intermediate. This attribute, in combination with the direction of the call, determines the value of attribute connPointType of the accounting record and may be used by downstream accounting processes to correlate the records. If the value is origTerm then records generated for incoming calls will be marked as originating and records generated for outgoing calls will be marked as terminating. If the value is intermediate then records generated for all calls will be marked as intermediate.
OBJECT-TYPE    
  INTEGER origTerm(0), intermediate(1)  

atmIfPnniAccountClass 1.3.6.1.4.1.562.2.4.1.114.96.12.1.3
This attribute specifies the accounting class associated with the interface. Its meaning is determined by the network operator. Its value is simply recorded in the accounting records generated by this interface, in the attribute callingServiceType or calledServiceType as appropriate.
OBJECT-TYPE    
  Unsigned32 0..255  

atmIfPnniServiceExchange 1.3.6.1.4.1.562.2.4.1.114.96.12.1.4
This attribute specifies the data service exchange associated with this interface. Its meaning is determined by the network operator. Its value is simply recorded in the accounting records generated by this interface, in the attribute callingDse or calledDse as appropriate.
OBJECT-TYPE    
  Unsigned32 0..255  

atmIfPnniOperationalTable 1.3.6.1.4.1.562.2.4.1.114.96.13
This group contains the operational attributes for a Pnni component.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmIfPnniOperationalEntry

atmIfPnniOperationalEntry 1.3.6.1.4.1.562.2.4.1.114.96.13.1
An entry in the atmIfPnniOperationalTable.
OBJECT-TYPE    
  AtmIfPnniOperationalEntry  

atmIfPnniPortId 1.3.6.1.4.1.562.2.4.1.114.96.13.1.1
This attribute indicates the port id of the PNNI interface, which is the parent AtmIf's instance number.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

atmPnniMIB 1.3.6.1.4.1.562.2.4.2.72
OBJECT IDENTIFIER    

atmPnniGroup 1.3.6.1.4.1.562.2.4.2.72.1
OBJECT IDENTIFIER    

atmPnniGroupBE 1.3.6.1.4.1.562.2.4.2.72.1.5
OBJECT IDENTIFIER    

atmPnniGroupBE00 1.3.6.1.4.1.562.2.4.2.72.1.5.1
OBJECT IDENTIFIER    

atmPnniGroupBE00A 1.3.6.1.4.1.562.2.4.2.72.1.5.1.2
OBJECT IDENTIFIER    

atmPnniCapabilities 1.3.6.1.4.1.562.2.4.2.72.3
OBJECT IDENTIFIER    

atmPnniCapabilitiesBE 1.3.6.1.4.1.562.2.4.2.72.3.5
OBJECT IDENTIFIER    

atmPnniCapabilitiesBE00 1.3.6.1.4.1.562.2.4.2.72.3.5.1
OBJECT IDENTIFIER    

atmPnniCapabilitiesBE00A 1.3.6.1.4.1.562.2.4.2.72.3.5.1.2
OBJECT IDENTIFIER    

Defined Objects

AtmIfVptPnniRowStatusEntry  
SEQUENCE    
  RowStatus as atmIfVptPnniRowStatus  
  DisplayString as atmIfVptPnniComponentName  
  StorageType as atmIfVptPnniStorageType  
  NonReplicated as atmIfVptPnniIndex  

AtmIfVptPnniProvEntry  
SEQUENCE    
  Unsigned32 as atmIfVptPnniSoftPvcRetryPeriod  
  Unsigned32 as atmIfVptPnniSoftPvpAndPvcRetryPeriod  
  Unsigned32 as atmIfVptPnniSoftPvpAndPvcHoldOffTime  

AtmIfVptPnniAdminWeightsEntry  
SEQUENCE    
  Unsigned32 as atmIfVptPnniCbrWeight  
  Unsigned32 as atmIfVptPnniRtVbrWeight  
  Unsigned32 as atmIfVptPnniNrtVbrWeight  
  Unsigned32 as atmIfVptPnniUbrWeight  

AtmIfVptPnniAcctOptEntry  
SEQUENCE    
  OCTET STRING as atmIfVptPnniAccountCollection  
  INTEGER as atmIfVptPnniAccountConnectionType  
  Unsigned32 as atmIfVptPnniAccountClass  
  Unsigned32 as atmIfVptPnniServiceExchange  

AtmIfVptPnniOperationalEntry  
SEQUENCE    
  Unsigned32 as atmIfVptPnniPortId  

AtmIfVptPnniVProvEntry  
SEQUENCE    
  Unsigned32 as atmIfVptPnniVpci  

AtmIfVptPnniSigRowStatusEntry  
SEQUENCE    
  RowStatus as atmIfVptPnniSigRowStatus  
  DisplayString as atmIfVptPnniSigComponentName  
  StorageType as atmIfVptPnniSigStorageType  
  NonReplicated as atmIfVptPnniSigIndex  

AtmIfVptPnniSigProvEntry  
SEQUENCE    
  Unsigned32 as atmIfVptPnniSigVci  
  INTEGER as atmIfVptPnniSigAddressConversion  

AtmIfVptPnniSigStateEntry  
SEQUENCE    
  INTEGER as atmIfVptPnniSigAdminState  
  INTEGER as atmIfVptPnniSigOperationalState  
  INTEGER as atmIfVptPnniSigUsageState  

AtmIfVptPnniSigOperEntry  
SEQUENCE    
  Unsigned32 as atmIfVptPnniSigLastTxCauseCode  
  Hex as atmIfVptPnniSigLastTxDiagCode  
  Unsigned32 as atmIfVptPnniSigLastRxCauseCode  
  Hex as atmIfVptPnniSigLastRxDiagCode  

AtmIfVptPnniSigStatsEntry  
SEQUENCE    
  Counter32 as atmIfVptPnniSigCurrentConnections  
  Gauge32 as atmIfVptPnniSigPeakConnections  
  Counter32 as atmIfVptPnniSigSuccessfulConnections  
  Counter32 as atmIfVptPnniSigFailedConnections  
  Counter32 as atmIfVptPnniSigTxPdus  
  Counter32 as atmIfVptPnniSigRxPdus  
  Gauge32 as atmIfVptPnniSigCurrentPmpConnections  
  Gauge32 as atmIfVptPnniSigPeakPmpConnections  
  Counter32 as atmIfVptPnniSigSuccessfulPmpConnections  
  Counter32 as atmIfVptPnniSigFailedPmpConnections  
  Gauge32 as atmIfVptPnniSigNewCurrentConnections  

AtmIfVptPnniSigVcdRowStatusEntry  
SEQUENCE    
  RowStatus as atmIfVptPnniSigVcdRowStatus  
  DisplayString as atmIfVptPnniSigVcdComponentName  
  StorageType as atmIfVptPnniSigVcdStorageType  
  NonReplicated as atmIfVptPnniSigVcdIndex  

AtmIfVptPnniSigVcdProvEntry  
SEQUENCE    
  INTEGER as atmIfVptPnniSigVcdTrafficDescType  
  INTEGER as atmIfVptPnniSigVcdAtmServiceCategory  
  INTEGER as atmIfVptPnniSigVcdQosClass  
  INTEGER as atmIfVptPnniSigVcdTrafficShaping  
  INTEGER as atmIfVptPnniSigVcdUnshapedTransmitQueueing  
  INTEGER as atmIfVptPnniSigVcdUsageParameterControl  

AtmIfVptPnniSigVcdTdpEntry  
SEQUENCE    
  Integer32 as atmIfVptPnniSigVcdTdpIndex  
  Unsigned32 as atmIfVptPnniSigVcdTdpValue  

AtmIfVptPnniRccRowStatusEntry  
SEQUENCE    
  RowStatus as atmIfVptPnniRccRowStatus  
  DisplayString as atmIfVptPnniRccComponentName  
  StorageType as atmIfVptPnniRccStorageType  
  NonReplicated as atmIfVptPnniRccIndex  

AtmIfVptPnniRccProvEntry  
SEQUENCE    
  Unsigned32 as atmIfVptPnniRccVci  

AtmIfVptPnniRccHlParmsEntry  
SEQUENCE    
  FixedPoint1 as atmIfVptPnniRccHelloHoldDown  
  Unsigned32 as atmIfVptPnniRccHelloInterval  
  Unsigned32 as atmIfVptPnniRccHelloInactivityFactor  

AtmIfVptPnniRccStateEntry  
SEQUENCE    
  INTEGER as atmIfVptPnniRccAdminState  
  INTEGER as atmIfVptPnniRccOperationalState  
  INTEGER as atmIfVptPnniRccUsageState  

AtmIfVptPnniRccOperEntry  
SEQUENCE    
  INTEGER as atmIfVptPnniRccType  
  INTEGER as atmIfVptPnniRccNegotiatedVersion  
  INTEGER as atmIfVptPnniRccHelloState  
  HexString as atmIfVptPnniRccRemoteNodeId  
  Unsigned32 as atmIfVptPnniRccRemotePortId  

AtmIfVptPnniRccStatsEntry  
SEQUENCE    
  Counter32 as atmIfVptPnniRccHelloPacketsRx  
  Counter32 as atmIfVptPnniRccHelloPacketsTx  
  Counter32 as atmIfVptPnniRccMismatchedHelloPacketsRx  
  Counter32 as atmIfVptPnniRccBadHelloPacketsRx  

AtmIfVptPnniRccVcdRowStatusEntry  
SEQUENCE    
  RowStatus as atmIfVptPnniRccVcdRowStatus  
  DisplayString as atmIfVptPnniRccVcdComponentName  
  StorageType as atmIfVptPnniRccVcdStorageType  
  NonReplicated as atmIfVptPnniRccVcdIndex  

AtmIfVptPnniRccVcdProvEntry  
SEQUENCE    
  INTEGER as atmIfVptPnniRccVcdTrafficDescType  
  INTEGER as atmIfVptPnniRccVcdAtmServiceCategory  
  INTEGER as atmIfVptPnniRccVcdQosClass  
  INTEGER as atmIfVptPnniRccVcdTrafficShaping  
  INTEGER as atmIfVptPnniRccVcdUnshapedTransmitQueueing  
  INTEGER as atmIfVptPnniRccVcdUsageParameterControl  

AtmIfVptPnniRccVcdTdpEntry  
SEQUENCE    
  Integer32 as atmIfVptPnniRccVcdTdpIndex  
  Unsigned32 as atmIfVptPnniRccVcdTdpValue  

AtmIfVptPnniAddrRowStatusEntry  
SEQUENCE    
  RowStatus as atmIfVptPnniAddrRowStatus  
  DisplayString as atmIfVptPnniAddrComponentName  
  StorageType as atmIfVptPnniAddrStorageType  
  AsciiStringIndex as atmIfVptPnniAddrAddressIndex  
  INTEGER as atmIfVptPnniAddrAddressTypeIndex  

AtmIfVptPnniAddrOperEntry  
SEQUENCE    
  INTEGER as atmIfVptPnniAddrScope  
  INTEGER as atmIfVptPnniAddrReachability  

AtmIfVptPnniAddrTermSPRowStatusEntry  
SEQUENCE    
  RowStatus as atmIfVptPnniAddrTermSPRowStatus  
  DisplayString as atmIfVptPnniAddrTermSPComponentName  
  StorageType as atmIfVptPnniAddrTermSPStorageType  
  NonReplicated as atmIfVptPnniAddrTermSPIndex  

AtmIfVptPnniAddrPnniInfoRowStatusEntry  
SEQUENCE    
  RowStatus as atmIfVptPnniAddrPnniInfoRowStatus  
  DisplayString as atmIfVptPnniAddrPnniInfoComponentName  
  StorageType as atmIfVptPnniAddrPnniInfoStorageType  
  NonReplicated as atmIfVptPnniAddrPnniInfoIndex  

AtmIfVptPnniAddrPnniInfoProvEntry  
SEQUENCE    
  INTEGER as atmIfVptPnniAddrPnniInfoScope  
  INTEGER as atmIfVptPnniAddrPnniInfoReachability  

AtmIfPnniRowStatusEntry  
SEQUENCE    
  RowStatus as atmIfPnniRowStatus  
  DisplayString as atmIfPnniComponentName  
  StorageType as atmIfPnniStorageType  
  NonReplicated as atmIfPnniIndex  

AtmIfPnniProvEntry  
SEQUENCE    
  Unsigned32 as atmIfPnniSoftPvcRetryPeriod  
  Unsigned32 as atmIfPnniSoftPvpAndPvcRetryPeriod  
  Unsigned32 as atmIfPnniSoftPvpAndPvcHoldOffTime  

AtmIfPnniAdminWeightsEntry  
SEQUENCE    
  Unsigned32 as atmIfPnniCbrWeight  
  Unsigned32 as atmIfPnniRtVbrWeight  
  Unsigned32 as atmIfPnniNrtVbrWeight  
  Unsigned32 as atmIfPnniUbrWeight  

AtmIfPnniAcctOptEntry  
SEQUENCE    
  OCTET STRING as atmIfPnniAccountCollection  
  INTEGER as atmIfPnniAccountConnectionType  
  Unsigned32 as atmIfPnniAccountClass  
  Unsigned32 as atmIfPnniServiceExchange  

AtmIfPnniOperationalEntry  
SEQUENCE    
  Unsigned32 as atmIfPnniPortId  

AtmIfPnniSigRowStatusEntry  
SEQUENCE    
  RowStatus as atmIfPnniSigRowStatus  
  DisplayString as atmIfPnniSigComponentName  
  StorageType as atmIfPnniSigStorageType  
  NonReplicated as atmIfPnniSigIndex  

AtmIfPnniSigProvEntry  
SEQUENCE    
  Unsigned32 as atmIfPnniSigVci  
  INTEGER as atmIfPnniSigAddressConversion  

AtmIfPnniSigStateEntry  
SEQUENCE    
  INTEGER as atmIfPnniSigAdminState  
  INTEGER as atmIfPnniSigOperationalState  
  INTEGER as atmIfPnniSigUsageState  

AtmIfPnniSigOperEntry  
SEQUENCE    
  Unsigned32 as atmIfPnniSigLastTxCauseCode  
  Hex as atmIfPnniSigLastTxDiagCode  
  Unsigned32 as atmIfPnniSigLastRxCauseCode  
  Hex as atmIfPnniSigLastRxDiagCode  

AtmIfPnniSigStatsEntry  
SEQUENCE    
  Counter32 as atmIfPnniSigCurrentConnections  
  Gauge32 as atmIfPnniSigPeakConnections  
  Counter32 as atmIfPnniSigSuccessfulConnections  
  Counter32 as atmIfPnniSigFailedConnections  
  Counter32 as atmIfPnniSigTxPdus  
  Counter32 as atmIfPnniSigRxPdus  
  Gauge32 as atmIfPnniSigCurrentPmpConnections  
  Gauge32 as atmIfPnniSigPeakPmpConnections  
  Counter32 as atmIfPnniSigSuccessfulPmpConnections  
  Counter32 as atmIfPnniSigFailedPmpConnections  
  Gauge32 as atmIfPnniSigNewCurrentConnections  

AtmIfPnniSigVcdRowStatusEntry  
SEQUENCE    
  RowStatus as atmIfPnniSigVcdRowStatus  
  DisplayString as atmIfPnniSigVcdComponentName  
  StorageType as atmIfPnniSigVcdStorageType  
  NonReplicated as atmIfPnniSigVcdIndex  

AtmIfPnniSigVcdProvEntry  
SEQUENCE    
  INTEGER as atmIfPnniSigVcdTrafficDescType  
  INTEGER as atmIfPnniSigVcdAtmServiceCategory  
  INTEGER as atmIfPnniSigVcdQosClass  
  INTEGER as atmIfPnniSigVcdTrafficShaping  
  INTEGER as atmIfPnniSigVcdUnshapedTransmitQueueing  
  INTEGER as atmIfPnniSigVcdUsageParameterControl  

AtmIfPnniSigVcdTdpEntry  
SEQUENCE    
  Integer32 as atmIfPnniSigVcdTdpIndex  
  Unsigned32 as atmIfPnniSigVcdTdpValue  

AtmIfPnniRccRowStatusEntry  
SEQUENCE    
  RowStatus as atmIfPnniRccRowStatus  
  DisplayString as atmIfPnniRccComponentName  
  StorageType as atmIfPnniRccStorageType  
  NonReplicated as atmIfPnniRccIndex  

AtmIfPnniRccProvEntry  
SEQUENCE    
  Unsigned32 as atmIfPnniRccVci  

AtmIfPnniRccHlParmsEntry  
SEQUENCE    
  FixedPoint1 as atmIfPnniRccHelloHoldDown  
  Unsigned32 as atmIfPnniRccHelloInterval  
  Unsigned32 as atmIfPnniRccHelloInactivityFactor  

AtmIfPnniRccStateEntry  
SEQUENCE    
  INTEGER as atmIfPnniRccAdminState  
  INTEGER as atmIfPnniRccOperationalState  
  INTEGER as atmIfPnniRccUsageState  

AtmIfPnniRccOperEntry  
SEQUENCE    
  INTEGER as atmIfPnniRccType  
  INTEGER as atmIfPnniRccNegotiatedVersion  
  INTEGER as atmIfPnniRccHelloState  
  HexString as atmIfPnniRccRemoteNodeId  
  Unsigned32 as atmIfPnniRccRemotePortId  

AtmIfPnniRccStatsEntry  
SEQUENCE    
  Counter32 as atmIfPnniRccHelloPacketsRx  
  Counter32 as atmIfPnniRccHelloPacketsTx  
  Counter32 as atmIfPnniRccMismatchedHelloPacketsRx  
  Counter32 as atmIfPnniRccBadHelloPacketsRx  

AtmIfPnniRccVcdRowStatusEntry  
SEQUENCE    
  RowStatus as atmIfPnniRccVcdRowStatus  
  DisplayString as atmIfPnniRccVcdComponentName  
  StorageType as atmIfPnniRccVcdStorageType  
  NonReplicated as atmIfPnniRccVcdIndex  

AtmIfPnniRccVcdProvEntry  
SEQUENCE    
  INTEGER as atmIfPnniRccVcdTrafficDescType  
  INTEGER as atmIfPnniRccVcdAtmServiceCategory  
  INTEGER as atmIfPnniRccVcdQosClass  
  INTEGER as atmIfPnniRccVcdTrafficShaping  
  INTEGER as atmIfPnniRccVcdUnshapedTransmitQueueing  
  INTEGER as atmIfPnniRccVcdUsageParameterControl  

AtmIfPnniRccVcdTdpEntry  
SEQUENCE    
  Integer32 as atmIfPnniRccVcdTdpIndex  
  Unsigned32 as atmIfPnniRccVcdTdpValue  

AtmIfPnniAddrRowStatusEntry  
SEQUENCE    
  RowStatus as atmIfPnniAddrRowStatus  
  DisplayString as atmIfPnniAddrComponentName  
  StorageType as atmIfPnniAddrStorageType  
  AsciiStringIndex as atmIfPnniAddrAddressIndex  
  INTEGER as atmIfPnniAddrAddressTypeIndex  

AtmIfPnniAddrOperEntry  
SEQUENCE    
  INTEGER as atmIfPnniAddrScope  
  INTEGER as atmIfPnniAddrReachability  

AtmIfPnniAddrTermSPRowStatusEntry  
SEQUENCE    
  RowStatus as atmIfPnniAddrTermSPRowStatus  
  DisplayString as atmIfPnniAddrTermSPComponentName  
  StorageType as atmIfPnniAddrTermSPStorageType  
  NonReplicated as atmIfPnniAddrTermSPIndex  

AtmIfPnniAddrPnniInfoRowStatusEntry  
SEQUENCE    
  RowStatus as atmIfPnniAddrPnniInfoRowStatus  
  DisplayString as atmIfPnniAddrPnniInfoComponentName  
  StorageType as atmIfPnniAddrPnniInfoStorageType  
  NonReplicated as atmIfPnniAddrPnniInfoIndex  

AtmIfPnniAddrPnniInfoProvEntry  
SEQUENCE    
  INTEGER as atmIfPnniAddrPnniInfoScope  
  INTEGER as atmIfPnniAddrPnniInfoReachability