Nortel-Magellan-Passport-DataCollectionMIB

File: Nortel-Magellan-Passport-DataCollectionMIB.mib (40131 bytes)

Imported modules

RFC-1212 Nortel-Magellan-Passport-UsefulDefinitionsMIB Nortel-Magellan-Passport-StandardTextualConventionsMIB
Nortel-Magellan-Passport-TextualConventionsMIB

Imported symbols

OBJECT-TYPE components passportMIBs
Counter32 DisplayString StorageType
RowStatus Gauge32 Integer32
Unsigned32 AsciiString NonReplicated
EnterpriseDateAndTime

Defined Objects

col 1.3.6.1.4.1.562.2.4.1.21
OBJECT IDENTIFIER    

colRowStatusTable 1.3.6.1.4.1.562.2.4.1.21.1
This entry controls the addition and deletion of col components.
OBJECT-TYPE    
  SEQUENCE OF  
    ColRowStatusEntry

colRowStatusEntry 1.3.6.1.4.1.562.2.4.1.21.1.1
A single entry in the table represents a single col component.
OBJECT-TYPE    
  ColRowStatusEntry  

colRowStatus 1.3.6.1.4.1.562.2.4.1.21.1.1.1
This variable is used as the basis for SNMP naming of col components. These components can be added.
OBJECT-TYPE    
  RowStatus  

colComponentName 1.3.6.1.4.1.562.2.4.1.21.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

colStorageType 1.3.6.1.4.1.562.2.4.1.21.1.1.4
This variable represents the storage type value for the col tables.
OBJECT-TYPE    
  StorageType  

colIndex 1.3.6.1.4.1.562.2.4.1.21.1.1.10
This variable represents the index for the col tables.
OBJECT-TYPE    
  INTEGER accounting(0), alarm(1), log(2), debug(3), scn(4), trap(5), stats(6)  

colSp 1.3.6.1.4.1.562.2.4.1.21.2
OBJECT IDENTIFIER    

colSpRowStatusTable 1.3.6.1.4.1.562.2.4.1.21.2.1
This entry controls the addition and deletion of colSp components.
OBJECT-TYPE    
  SEQUENCE OF  
    ColSpRowStatusEntry

colSpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.21.2.1.1
A single entry in the table represents a single colSp component.
OBJECT-TYPE    
  ColSpRowStatusEntry  

colSpRowStatus 1.3.6.1.4.1.562.2.4.1.21.2.1.1.1
This variable is used as the basis for SNMP naming of colSp components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

colSpComponentName 1.3.6.1.4.1.562.2.4.1.21.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

colSpStorageType 1.3.6.1.4.1.562.2.4.1.21.2.1.1.4
This variable represents the storage type value for the colSp tables.
OBJECT-TYPE    
  StorageType  

colSpIndex 1.3.6.1.4.1.562.2.4.1.21.2.1.1.10
This variable represents the index for the colSp tables.
OBJECT-TYPE    
  NonReplicated  

colSpProvTable 1.3.6.1.4.1.562.2.4.1.21.2.10
This group specifies all of the provisioning data for a DCS Spooler.
OBJECT-TYPE    
  SEQUENCE OF  
    ColSpProvEntry

colSpProvEntry 1.3.6.1.4.1.562.2.4.1.21.2.10.1
An entry in the colSpProvTable.
OBJECT-TYPE    
  ColSpProvEntry  

colSpSpooling 1.3.6.1.4.1.562.2.4.1.21.2.10.1.1
This attribute specifies whether or not this type of data is spooled to the disk. If set to off, it is roughly equivalent to Locking the Spooler (except this will survive processor restarts). The following defaults are used: - alarm: on - accounting: on - log: on - debug: off - scn: on - trap: off (see Note below) - stats: on Note that SNMP Traps cannot be spooled. A semantic check prevents the user from setting the value to on for the trap stream.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

colSpMaximumNumberOfFiles 1.3.6.1.4.1.562.2.4.1.21.2.10.1.2
This attribute specifies the maximum number of files that should be kept on the disk in the directory containing the closed files of this type. The value 0 is defined to mean 'unlimited'. A different default for each type of Spooler is defined as follows: - alarm: 30 - accounting: 200 - debug: 2 - log: 10 - scn: 10 - trap: 2 (this value is meaningless and is ignored) - stats: 200
OBJECT-TYPE    
  Unsigned32 0..200  

colSpStateTable 1.3.6.1.4.1.562.2.4.1.21.2.11
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    ColSpStateEntry

colSpStateEntry 1.3.6.1.4.1.562.2.4.1.21.2.11.1
An entry in the colSpStateTable.
OBJECT-TYPE    
  ColSpStateEntry  

colSpAdminState 1.3.6.1.4.1.562.2.4.1.21.2.11.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

colSpOperationalState 1.3.6.1.4.1.562.2.4.1.21.2.11.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

colSpUsageState 1.3.6.1.4.1.562.2.4.1.21.2.11.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

colSpAvailabilityStatus 1.3.6.1.4.1.562.2.4.1.21.2.11.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

colSpProceduralStatus 1.3.6.1.4.1.562.2.4.1.21.2.11.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

colSpControlStatus 1.3.6.1.4.1.562.2.4.1.21.2.11.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

colSpAlarmStatus 1.3.6.1.4.1.562.2.4.1.21.2.11.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

colSpStandbyStatus 1.3.6.1.4.1.562.2.4.1.21.2.11.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

colSpUnknownStatus 1.3.6.1.4.1.562.2.4.1.21.2.11.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

colSpOperTable 1.3.6.1.4.1.562.2.4.1.21.2.12
This group contains the operational attributes specific to a DCS Spooler.
OBJECT-TYPE    
  SEQUENCE OF  
    ColSpOperEntry

colSpOperEntry 1.3.6.1.4.1.562.2.4.1.21.2.12.1
An entry in the colSpOperTable.
OBJECT-TYPE    
  ColSpOperEntry  

colSpSpoolingFileName 1.3.6.1.4.1.562.2.4.1.21.2.12.1.1
When spooling is on, this attribute contains the name of the open file into which data is currently being spooled. When spooling is off, the value of this attribute is the empty string.
OBJECT-TYPE    
  AsciiString SIZE(0..128)  

colSpStatsTable 1.3.6.1.4.1.562.2.4.1.21.2.13
This group specifies the statistics operational attributes of the DCS Collector, Agent and Spooler components.
OBJECT-TYPE    
  SEQUENCE OF  
    ColSpStatsEntry

colSpStatsEntry 1.3.6.1.4.1.562.2.4.1.21.2.13.1
An entry in the colSpStatsTable.
OBJECT-TYPE    
  ColSpStatsEntry  

colSpCurrentQueueSize 1.3.6.1.4.1.562.2.4.1.21.2.13.1.1
This gauge contains the current number of records held by this DCS component.
OBJECT-TYPE    
  Gauge32 0..4294967295  

colSpRecordsRx 1.3.6.1.4.1.562.2.4.1.21.2.13.1.2
This counter contains the cumulative number of records received by a DCS component, from applications which send data to it, since the processor last restarted. This counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

colSpRecordsDiscarded 1.3.6.1.4.1.562.2.4.1.21.2.13.1.3
This is the cumulative number of records discarded by this DCS component since the processor last restarted. This counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

colAg 1.3.6.1.4.1.562.2.4.1.21.3
OBJECT IDENTIFIER    

colAgRowStatusTable 1.3.6.1.4.1.562.2.4.1.21.3.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of colAg components.
OBJECT-TYPE    
  SEQUENCE OF  
    ColAgRowStatusEntry

colAgRowStatusEntry 1.3.6.1.4.1.562.2.4.1.21.3.1.1
A single entry in the table represents a single colAg component.
OBJECT-TYPE    
  ColAgRowStatusEntry  

colAgRowStatus 1.3.6.1.4.1.562.2.4.1.21.3.1.1.1
This variable is used as the basis for SNMP naming of colAg components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

colAgComponentName 1.3.6.1.4.1.562.2.4.1.21.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

colAgStorageType 1.3.6.1.4.1.562.2.4.1.21.3.1.1.4
This variable represents the storage type value for the colAg tables.
OBJECT-TYPE    
  StorageType  

colAgIndex 1.3.6.1.4.1.562.2.4.1.21.3.1.1.10
This variable represents the index for the colAg tables.
OBJECT-TYPE    
  Integer32 0..15  

colAgStatsTable 1.3.6.1.4.1.562.2.4.1.21.3.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group specifies the statistics operational attributes of the DCS Collector, Agent and Spooler components.
OBJECT-TYPE    
  SEQUENCE OF  
    ColAgStatsEntry

colAgStatsEntry 1.3.6.1.4.1.562.2.4.1.21.3.10.1
An entry in the colAgStatsTable.
OBJECT-TYPE    
  ColAgStatsEntry  

colAgCurrentQueueSize 1.3.6.1.4.1.562.2.4.1.21.3.10.1.1
This gauge contains the current number of records held by this DCS component.
OBJECT-TYPE    
  Gauge32 0..4294967295  

colAgRecordsRx 1.3.6.1.4.1.562.2.4.1.21.3.10.1.2
This counter contains the cumulative number of records received by a DCS component, from applications which send data to it, since the processor last restarted. This counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

colAgRecordsDiscarded 1.3.6.1.4.1.562.2.4.1.21.3.10.1.3
This is the cumulative number of records discarded by this DCS component since the processor last restarted. This counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

colAgAgentStatsTable 1.3.6.1.4.1.562.2.4.1.21.3.11
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the statistical attributes specific to the DCS Agent components.
OBJECT-TYPE    
  SEQUENCE OF  
    ColAgAgentStatsEntry

colAgAgentStatsEntry 1.3.6.1.4.1.562.2.4.1.21.3.11.1
An entry in the colAgAgentStatsTable.
OBJECT-TYPE    
  ColAgAgentStatsEntry  

colAgRecordsNotGenerated 1.3.6.1.4.1.562.2.4.1.21.3.11.1.1
This attribute counts the records of a particular event type on this Card which could not be generated by some application due to some problem such as insufficient resources. One cannot tell exactly which event could not be generated, nor which application instance tried to generate it, but when this count increases, it is an indicator that some re-engineering may be required and will provide some idea as to why a record is missing. This counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

colProvTable 1.3.6.1.4.1.562.2.4.1.21.10
This group specifies all of the provisioning data for a DCS Collector.
OBJECT-TYPE    
  SEQUENCE OF  
    ColProvEntry

colProvEntry 1.3.6.1.4.1.562.2.4.1.21.10.1
An entry in the colProvTable.
OBJECT-TYPE    
  ColProvEntry  

colAgentQueueSize 1.3.6.1.4.1.562.2.4.1.21.10.1.1
This attribute has been replaced with the agentQueueSize attribute in the Lp Engineering DataStream Ov component. Upon migration, if the existing provisioned value of this attribute is the same as the system default for this type of data, no new components are added because the default is what the DataStream component already would be using. Otherwise, if the value is not the same as the system default, then for each Lp which is provisioned at the time of the migration, a DataStream is provisioned and the Ov's agentQueueSize is set to the non-default value.
OBJECT-TYPE    
  Unsigned32 0 | 20..10000  

colStatsTable 1.3.6.1.4.1.562.2.4.1.21.11
This group specifies the statistics operational attributes of the DCS Collector, Agent and Spooler components.
OBJECT-TYPE    
  SEQUENCE OF  
    ColStatsEntry

colStatsEntry 1.3.6.1.4.1.562.2.4.1.21.11.1
An entry in the colStatsTable.
OBJECT-TYPE    
  ColStatsEntry  

colCurrentQueueSize 1.3.6.1.4.1.562.2.4.1.21.11.1.1
This gauge contains the current number of records held by this DCS component.
OBJECT-TYPE    
  Gauge32 0..4294967295  

colRecordsRx 1.3.6.1.4.1.562.2.4.1.21.11.1.2
This counter contains the cumulative number of records received by a DCS component, from applications which send data to it, since the processor last restarted. This counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

colRecordsDiscarded 1.3.6.1.4.1.562.2.4.1.21.11.1.3
This is the cumulative number of records discarded by this DCS component since the processor last restarted. This counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

colTimesTable 1.3.6.1.4.1.562.2.4.1.21.266
This attribute specifies the scheduled times at which data should be collected. Only accounting applications need the capability to generate data in this way. Setting this attribute for other streams has no effect. The user can enter the times in any order and duplicates are prevented at data entry. There is a limit of 24 entries, which is imposed at semantic check time. The collection times are triggered in chronological order. A semantic check error is issued if any 2 entries are less than 1 hour apart or if any 2 entries are more than 12 hours apart (which implies that if any entries are provided, there must be at least 2 entries). Note that by default (that is, in the absence of a provisioned schedule), a Virtual Circuit (VC) starts its own 12-hour accounting timer. If any collection times are provisioned here, then the Time- Of-Day-Accounting (TODA) method is used in place of 12-hour accounting. This is applicable to both Switched VCs and Permanent VCs.
OBJECT-TYPE    
  SEQUENCE OF  
    ColTimesEntry

colTimesEntry 1.3.6.1.4.1.562.2.4.1.21.266.1
An entry in the colTimesTable.
OBJECT-TYPE    
  ColTimesEntry  

colTimesValue 1.3.6.1.4.1.562.2.4.1.21.266.1.1
This variable represents both the value and the index for the colTimesTable.
OBJECT-TYPE    
  EnterpriseDateAndTime SIZE(5)  

colTimesRowStatus 1.3.6.1.4.1.562.2.4.1.21.266.1.2
This variable is used to control the addition and deletion of individual values of the colTimesTable.
OBJECT-TYPE    
  RowStatus  

colLastTable 1.3.6.1.4.1.562.2.4.1.21.275
Note: This was made obsolete in R4.1 (BD0108A). This attribute is used for Collector/stats and Collector/account. For statistics, when collection is turned off, or prior to the very first probe, the value is the empty list. Otherwise, this is the network time at which the last probe was sent out (that is, the last time that statistics were collected from, or at least reset by, the applications providing them). For accounting, when no entries exist in collectionTimes, or prior to the very first collection time, the value is the empty list. Otherwise, this is the network time at which the last time-of-day changeover occurred.
OBJECT-TYPE    
  SEQUENCE OF  
    ColLastEntry

colLastEntry 1.3.6.1.4.1.562.2.4.1.21.275.1
An entry in the colLastTable.
OBJECT-TYPE    
  ColLastEntry  

colLastValue 1.3.6.1.4.1.562.2.4.1.21.275.1.1
This variable represents both the value and the index for the colLastTable.
OBJECT-TYPE    
  EnterpriseDateAndTime SIZE(19)  

colPeakTable 1.3.6.1.4.1.562.2.4.1.21.279
This attribute specifies the length of the accounting peak water mark interval. It is at least one minute and at most 15 minutes long. An accounting peak water mark within a given accounting interval is the accounting count which occured during a peak water mark interval with the highest traffic. Peak water marks are used to determine traffic bursts. If no value is provisioned for this attribute value of 5 minutes is assumed. Peak water mark is only measured if attribute collectionTimes in Collector/account is provisioned.
OBJECT-TYPE    
  SEQUENCE OF  
    ColPeakEntry

colPeakEntry 1.3.6.1.4.1.562.2.4.1.21.279.1
An entry in the colPeakTable.
OBJECT-TYPE    
  ColPeakEntry  

colPeakValue 1.3.6.1.4.1.562.2.4.1.21.279.1.1
This variable represents both the value and the index for the colPeakTable.
OBJECT-TYPE    
  Integer32 1..15  

colPeakRowStatus 1.3.6.1.4.1.562.2.4.1.21.279.1.2
This variable is used to control the addition and deletion of individual values of the colPeakTable.
OBJECT-TYPE    
  RowStatus  

dataCollectionMIB 1.3.6.1.4.1.562.2.4.2.14
OBJECT IDENTIFIER    

dataCollectionGroup 1.3.6.1.4.1.562.2.4.2.14.1
OBJECT IDENTIFIER    

dataCollectionGroupBE 1.3.6.1.4.1.562.2.4.2.14.1.5
OBJECT IDENTIFIER    

dataCollectionGroupBE00 1.3.6.1.4.1.562.2.4.2.14.1.5.1
OBJECT IDENTIFIER    

dataCollectionGroupBE00A 1.3.6.1.4.1.562.2.4.2.14.1.5.1.2
OBJECT IDENTIFIER    

dataCollectionCapabilities 1.3.6.1.4.1.562.2.4.2.14.3
OBJECT IDENTIFIER    

dataCollectionCapabilitiesBE 1.3.6.1.4.1.562.2.4.2.14.3.5
OBJECT IDENTIFIER    

dataCollectionCapabilitiesBE00 1.3.6.1.4.1.562.2.4.2.14.3.5.1
OBJECT IDENTIFIER    

dataCollectionCapabilitiesBE00A 1.3.6.1.4.1.562.2.4.2.14.3.5.1.2
OBJECT IDENTIFIER    

Defined Objects

ColRowStatusEntry  
SEQUENCE    
  RowStatus as colRowStatus  
  DisplayString as colComponentName  
  StorageType as colStorageType  
  INTEGER as colIndex  

ColProvEntry  
SEQUENCE    
  Unsigned32 as colAgentQueueSize  

ColStatsEntry  
SEQUENCE    
  Gauge32 as colCurrentQueueSize  
  Counter32 as colRecordsRx  
  Counter32 as colRecordsDiscarded  

ColTimesEntry  
SEQUENCE    
  EnterpriseDateAndTime as colTimesValue  
  RowStatus as colTimesRowStatus  

ColLastEntry  
SEQUENCE    
  EnterpriseDateAndTime as colLastValue  

ColPeakEntry  
SEQUENCE    
  Integer32 as colPeakValue  
  RowStatus as colPeakRowStatus  

ColSpRowStatusEntry  
SEQUENCE    
  RowStatus as colSpRowStatus  
  DisplayString as colSpComponentName  
  StorageType as colSpStorageType  
  NonReplicated as colSpIndex  

ColSpProvEntry  
SEQUENCE    
  INTEGER as colSpSpooling  
  Unsigned32 as colSpMaximumNumberOfFiles  

ColSpStateEntry  
SEQUENCE    
  INTEGER as colSpAdminState  
  INTEGER as colSpOperationalState  
  INTEGER as colSpUsageState  
  OCTET STRING as colSpAvailabilityStatus  
  OCTET STRING as colSpProceduralStatus  
  OCTET STRING as colSpControlStatus  
  OCTET STRING as colSpAlarmStatus  
  INTEGER as colSpStandbyStatus  
  INTEGER as colSpUnknownStatus  

ColSpOperEntry  
SEQUENCE    
  AsciiString as colSpSpoolingFileName  

ColSpStatsEntry  
SEQUENCE    
  Gauge32 as colSpCurrentQueueSize  
  Counter32 as colSpRecordsRx  
  Counter32 as colSpRecordsDiscarded  

ColAgRowStatusEntry  
SEQUENCE    
  RowStatus as colAgRowStatus  
  DisplayString as colAgComponentName  
  StorageType as colAgStorageType  
  Integer32 as colAgIndex  

ColAgStatsEntry  
SEQUENCE    
  Gauge32 as colAgCurrentQueueSize  
  Counter32 as colAgRecordsRx  
  Counter32 as colAgRecordsDiscarded  

ColAgAgentStatsEntry  
SEQUENCE    
  Counter32 as colAgRecordsNotGenerated