Nortel-Magellan-Passport-DisdnETSIMIB

File: Nortel-Magellan-Passport-DisdnETSIMIB.mib (28198 bytes)

Imported modules

RFC-1212 Nortel-Magellan-Passport-UsefulDefinitionsMIB Nortel-Magellan-Passport-StandardTextualConventionsMIB
Nortel-Magellan-Passport-TextualConventionsMIB Nortel-Magellan-Passport-DataIsdnMIB

Imported symbols

OBJECT-TYPE passportMIBs DisplayString
StorageType RowStatus Unsigned32
NonReplicated Link dataSigChanIndex
dataSigChan

Defined Objects

dataSigChanEtsi 1.3.6.1.4.1.562.2.4.1.120.10
OBJECT IDENTIFIER    

dataSigChanEtsiRowStatusTable 1.3.6.1.4.1.562.2.4.1.120.10.1
This entry controls the addition and deletion of dataSigChanEtsi components.
OBJECT-TYPE    
  SEQUENCE OF  
    DataSigChanEtsiRowStatusEntry

dataSigChanEtsiRowStatusEntry 1.3.6.1.4.1.562.2.4.1.120.10.1.1
A single entry in the table represents a single dataSigChanEtsi component.
OBJECT-TYPE    
  DataSigChanEtsiRowStatusEntry  

dataSigChanEtsiRowStatus 1.3.6.1.4.1.562.2.4.1.120.10.1.1.1
This variable is used as the basis for SNMP naming of dataSigChanEtsi components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

dataSigChanEtsiComponentName 1.3.6.1.4.1.562.2.4.1.120.10.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

dataSigChanEtsiStorageType 1.3.6.1.4.1.562.2.4.1.120.10.1.1.4
This variable represents the storage type value for the dataSigChanEtsi tables.
OBJECT-TYPE    
  StorageType  

dataSigChanEtsiIndex 1.3.6.1.4.1.562.2.4.1.120.10.1.1.10
This variable represents the index for the dataSigChanEtsi tables.
OBJECT-TYPE    
  NonReplicated  

dataSigChanEtsiFramer 1.3.6.1.4.1.562.2.4.1.120.10.2
OBJECT IDENTIFIER    

dataSigChanEtsiFramerRowStatusTable 1.3.6.1.4.1.562.2.4.1.120.10.2.1
This entry controls the addition and deletion of dataSigChanEtsiFramer components.
OBJECT-TYPE    
  SEQUENCE OF  
    DataSigChanEtsiFramerRowStatusEntry

dataSigChanEtsiFramerRowStatusEntry 1.3.6.1.4.1.562.2.4.1.120.10.2.1.1
A single entry in the table represents a single dataSigChanEtsiFramer component.
OBJECT-TYPE    
  DataSigChanEtsiFramerRowStatusEntry  

dataSigChanEtsiFramerRowStatus 1.3.6.1.4.1.562.2.4.1.120.10.2.1.1.1
This variable is used as the basis for SNMP naming of dataSigChanEtsiFramer components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

dataSigChanEtsiFramerComponentName 1.3.6.1.4.1.562.2.4.1.120.10.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

dataSigChanEtsiFramerStorageType 1.3.6.1.4.1.562.2.4.1.120.10.2.1.1.4
This variable represents the storage type value for the dataSigChanEtsiFramer tables.
OBJECT-TYPE    
  StorageType  

dataSigChanEtsiFramerIndex 1.3.6.1.4.1.562.2.4.1.120.10.2.1.1.10
This variable represents the index for the dataSigChanEtsiFramer tables.
OBJECT-TYPE    
  NonReplicated  

dataSigChanEtsiFramerProvTable 1.3.6.1.4.1.562.2.4.1.120.10.2.10
This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups.
OBJECT-TYPE    
  SEQUENCE OF  
    DataSigChanEtsiFramerProvEntry

dataSigChanEtsiFramerProvEntry 1.3.6.1.4.1.562.2.4.1.120.10.2.10.1
An entry in the dataSigChanEtsiFramerProvTable.
OBJECT-TYPE    
  DataSigChanEtsiFramerProvEntry  

dataSigChanEtsiFramerInterfaceName 1.3.6.1.4.1.562.2.4.1.120.10.2.10.1.1
This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run.
OBJECT-TYPE    
  Link  

dataSigChanEtsiFramerStateTable 1.3.6.1.4.1.562.2.4.1.120.10.2.12
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    DataSigChanEtsiFramerStateEntry

dataSigChanEtsiFramerStateEntry 1.3.6.1.4.1.562.2.4.1.120.10.2.12.1
An entry in the dataSigChanEtsiFramerStateTable.
OBJECT-TYPE    
  DataSigChanEtsiFramerStateEntry  

dataSigChanEtsiFramerAdminState 1.3.6.1.4.1.562.2.4.1.120.10.2.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

dataSigChanEtsiFramerOperationalState 1.3.6.1.4.1.562.2.4.1.120.10.2.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

dataSigChanEtsiFramerUsageState 1.3.6.1.4.1.562.2.4.1.120.10.2.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

dataSigChanEtsiFramerStatsTable 1.3.6.1.4.1.562.2.4.1.120.10.2.13
This group contains the operational statistics data for a Framer component.
OBJECT-TYPE    
  SEQUENCE OF  
    DataSigChanEtsiFramerStatsEntry

dataSigChanEtsiFramerStatsEntry 1.3.6.1.4.1.562.2.4.1.120.10.2.13.1
An entry in the dataSigChanEtsiFramerStatsTable.
OBJECT-TYPE    
  DataSigChanEtsiFramerStatsEntry  

dataSigChanEtsiFramerFrmToIf 1.3.6.1.4.1.562.2.4.1.120.10.2.13.1.1
This attribute counts the number of frames transmitted to the link interface by Framer. This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dataSigChanEtsiFramerFrmFromIf 1.3.6.1.4.1.562.2.4.1.120.10.2.13.1.2
This attribute counts the number of frames received from the link interface by Framer. This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dataSigChanEtsiFramerOctetFromIf 1.3.6.1.4.1.562.2.4.1.120.10.2.13.1.3
The number of bytes received from the link interface by Framer.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dataSigChanEtsiFramerAborts 1.3.6.1.4.1.562.2.4.1.120.10.2.13.1.4
This attribute counts the total number of aborts received. This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dataSigChanEtsiFramerCrcErrors 1.3.6.1.4.1.562.2.4.1.120.10.2.13.1.5
This attribute counts the total number of frames with CRC errors. This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dataSigChanEtsiFramerLrcErrors 1.3.6.1.4.1.562.2.4.1.120.10.2.13.1.6
This attribute counts the total number of frames with LRC errors. This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dataSigChanEtsiFramerNonOctetErrors 1.3.6.1.4.1.562.2.4.1.120.10.2.13.1.7
This attribute counts the total number of frames that were non octet aligned. This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dataSigChanEtsiFramerOverruns 1.3.6.1.4.1.562.2.4.1.120.10.2.13.1.8
This attribute counts the total number of frames received from the link for which overruns occurred. This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dataSigChanEtsiFramerUnderruns 1.3.6.1.4.1.562.2.4.1.120.10.2.13.1.9
This attribute counts the total number of frames transmitted to the link for which underruns occurred. This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dataSigChanEtsiFramerLargeFrmErrors 1.3.6.1.4.1.562.2.4.1.120.10.2.13.1.10
This attribute counts the total number of frames received which were too large. The frame was longer than 500 bytes. This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

dataSigChanEtsiL2Table 1.3.6.1.4.1.562.2.4.1.120.10.11
This group represents the provisionable Layer 2 attributes of the Q931 CCITT protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    DataSigChanEtsiL2Entry

dataSigChanEtsiL2Entry 1.3.6.1.4.1.562.2.4.1.120.10.11.1
An entry in the dataSigChanEtsiL2Table.
OBJECT-TYPE    
  DataSigChanEtsiL2Entry  

dataSigChanEtsiT23 1.3.6.1.4.1.562.2.4.1.120.10.11.1.1
This attribute specifies the layer2 enable request timer.
OBJECT-TYPE    
  Unsigned32 1..15  

dataSigChanEtsiT200 1.3.6.1.4.1.562.2.4.1.120.10.11.1.2
This attribute specifies the maximum time between a layer 2 frame and its acknowledgement
OBJECT-TYPE    
  Unsigned32 1..20  

dataSigChanEtsiN200 1.3.6.1.4.1.562.2.4.1.120.10.11.1.3
This attribute specifies the maximum number of re-transmissions of a layer2 frame.
OBJECT-TYPE    
  Unsigned32 1..8  

dataSigChanEtsiT203 1.3.6.1.4.1.562.2.4.1.120.10.11.1.4
This attribute specifies the maximum time that a no layer 2 traffic situation can last. Expiry triggers a check on whether the far end is a live.
OBJECT-TYPE    
  Unsigned32 2..40  

dataSigChanEtsiN201 1.3.6.1.4.1.562.2.4.1.120.10.11.1.5
This attribute specifies the maximum number of octets in an information field.
OBJECT-TYPE    
  Unsigned32 4..260  

dataSigChanEtsiCircuitSwitchedK 1.3.6.1.4.1.562.2.4.1.120.10.11.1.6
This attribute specifies the maximum number of frames for B channel use.
OBJECT-TYPE    
  Unsigned32 1..632  

dataSigChanEtsiProvTable 1.3.6.1.4.1.562.2.4.1.120.10.13
This group defines the general options of the d-channel signalling link.
OBJECT-TYPE    
  SEQUENCE OF  
    DataSigChanEtsiProvEntry

dataSigChanEtsiProvEntry 1.3.6.1.4.1.562.2.4.1.120.10.13.1
An entry in the dataSigChanEtsiProvTable.
OBJECT-TYPE    
  DataSigChanEtsiProvEntry  

dataSigChanEtsiSide 1.3.6.1.4.1.562.2.4.1.120.10.13.1.1
This attribute specifies whether the layer 2 HDLC interface is the network or user side of the connection.
OBJECT-TYPE    
  INTEGER network(1), user(2)  

dataSigChanEtsiOperTable 1.3.6.1.4.1.562.2.4.1.120.10.15
This group provides the operational attributes for the signalling protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    DataSigChanEtsiOperEntry

dataSigChanEtsiOperEntry 1.3.6.1.4.1.562.2.4.1.120.10.15.1
An entry in the dataSigChanEtsiOperTable.
OBJECT-TYPE    
  DataSigChanEtsiOperEntry  

dataSigChanEtsiActiveChannels 1.3.6.1.4.1.562.2.4.1.120.10.15.1.1
This attribute indicates the number of currently active channels. This includes data and voice channels.
OBJECT-TYPE    
  Unsigned32 0..128  

dataSigChanEtsiPeakActiveChannels 1.3.6.1.4.1.562.2.4.1.120.10.15.1.4
This attribute indicates the maximum number of channels that have been active on this signalling channel during the last polling period.
OBJECT-TYPE    
  Unsigned32 0..128  

dataSigChanEtsiDChanStatus 1.3.6.1.4.1.562.2.4.1.120.10.15.1.7
This attribute indicates the state of the D-channel. outOfService means that there is no layer 2 or layer 3 connectivity to the PBX. establishing means that the signalling channel is attempting to stage the layer 2. established means that the layer 2 is enabled. If the signalling channel stays in the established state, then it is waiting for a restart from the PBX. enabling means that the resources for processing calls are being initialized. If the signalling channel stays in the enabling state then it is waiting for a restart acknowledgement from the PBX. inService means that the resources for processing calls are available. restarting means that the resources for call processing are being rei- initialized.
OBJECT-TYPE    
  INTEGER outOfService(0), establishing(1), established(2), enabling(3), inService(4), restarting(5)  

dataSigChanEtsiToolsTable 1.3.6.1.4.1.562.2.4.1.120.10.16
This group contains a series of operational attributes which turn on and off several kinds of tracing.
OBJECT-TYPE    
  SEQUENCE OF  
    DataSigChanEtsiToolsEntry

dataSigChanEtsiToolsEntry 1.3.6.1.4.1.562.2.4.1.120.10.16.1
An entry in the dataSigChanEtsiToolsTable.
OBJECT-TYPE    
  DataSigChanEtsiToolsEntry  

dataSigChanEtsiTracing 1.3.6.1.4.1.562.2.4.1.120.10.16.1.1
This attribute defines which types of tracing are active for this signalling channel. The tracing messages are sent to the debug stream. To see the messages the agentQueue attribute in Col/debug must be greater than 0 and a Telnet NMIS session must list the debug stream in in its data streams (ex. set nmis telnet session/1 dataStreams debug). Different types of tracing can be enabled simultaneously. Note that tracing consumes additional CPU resources and will slow down call processing on a heavily loaded card. If there is message block exhaustion tracing will be suspended for a period and then automatically reenabled. An alarm is generated on tracing suspension and resumption. This mechanism protects the function processor against excessive numbers of tracing messages. Types of tracing include: protocolErrors - get details of any protocol errors which are occuring. Protocol errors are also reported in summary form as alarms. q931Summary - Summary of the Q.931 messages on the signalling link, including certain call details (calling number, called number, release codes). q931Hex - Q.931 messages displayed in hex format. Useful to determine protocol compliance in case of errors reported on local or remote ends. q931Symbolic - Q.931 messages parsed to give maximum detail. Useful for understanding content of messages flowing on the link. portHex - Messages in hex format being sent and received on the link. Description of bits: protocolErrors(0) q931Summary(1) q931Hex(2) q931Symbolic(3) portHex(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

disdnETSIMIB 1.3.6.1.4.1.562.2.4.2.117
OBJECT IDENTIFIER    

disdnETSIGroup 1.3.6.1.4.1.562.2.4.2.117.1
OBJECT IDENTIFIER    

disdnETSIGroupBE 1.3.6.1.4.1.562.2.4.2.117.1.5
OBJECT IDENTIFIER    

disdnETSIGroupBE00 1.3.6.1.4.1.562.2.4.2.117.1.5.1
OBJECT IDENTIFIER    

disdnETSIGroupBE00A 1.3.6.1.4.1.562.2.4.2.117.1.5.1.2
OBJECT IDENTIFIER    

disdnETSICapabilities 1.3.6.1.4.1.562.2.4.2.117.3
OBJECT IDENTIFIER    

disdnETSICapabilitiesBE 1.3.6.1.4.1.562.2.4.2.117.3.5
OBJECT IDENTIFIER    

disdnETSICapabilitiesBE00 1.3.6.1.4.1.562.2.4.2.117.3.5.1
OBJECT IDENTIFIER    

disdnETSICapabilitiesBE00A 1.3.6.1.4.1.562.2.4.2.117.3.5.1.2
OBJECT IDENTIFIER    

Defined Objects

DataSigChanEtsiRowStatusEntry  
SEQUENCE    
  RowStatus as dataSigChanEtsiRowStatus  
  DisplayString as dataSigChanEtsiComponentName  
  StorageType as dataSigChanEtsiStorageType  
  NonReplicated as dataSigChanEtsiIndex  

DataSigChanEtsiL2Entry  
SEQUENCE    
  Unsigned32 as dataSigChanEtsiT23  
  Unsigned32 as dataSigChanEtsiT200  
  Unsigned32 as dataSigChanEtsiN200  
  Unsigned32 as dataSigChanEtsiT203  
  Unsigned32 as dataSigChanEtsiN201  
  Unsigned32 as dataSigChanEtsiCircuitSwitchedK  

DataSigChanEtsiProvEntry  
SEQUENCE    
  INTEGER as dataSigChanEtsiSide  

DataSigChanEtsiOperEntry  
SEQUENCE    
  Unsigned32 as dataSigChanEtsiActiveChannels  
  Unsigned32 as dataSigChanEtsiPeakActiveChannels  
  INTEGER as dataSigChanEtsiDChanStatus  

DataSigChanEtsiToolsEntry  
SEQUENCE    
  OCTET STRING as dataSigChanEtsiTracing  

DataSigChanEtsiFramerRowStatusEntry  
SEQUENCE    
  RowStatus as dataSigChanEtsiFramerRowStatus  
  DisplayString as dataSigChanEtsiFramerComponentName  
  StorageType as dataSigChanEtsiFramerStorageType  
  NonReplicated as dataSigChanEtsiFramerIndex  

DataSigChanEtsiFramerProvEntry  
SEQUENCE    
  Link as dataSigChanEtsiFramerInterfaceName  

DataSigChanEtsiFramerStateEntry  
SEQUENCE    
  INTEGER as dataSigChanEtsiFramerAdminState  
  INTEGER as dataSigChanEtsiFramerOperationalState  
  INTEGER as dataSigChanEtsiFramerUsageState  

DataSigChanEtsiFramerStatsEntry  
SEQUENCE    
  Unsigned32 as dataSigChanEtsiFramerFrmToIf  
  Unsigned32 as dataSigChanEtsiFramerFrmFromIf  
  Unsigned32 as dataSigChanEtsiFramerOctetFromIf  
  Unsigned32 as dataSigChanEtsiFramerAborts  
  Unsigned32 as dataSigChanEtsiFramerCrcErrors  
  Unsigned32 as dataSigChanEtsiFramerLrcErrors  
  Unsigned32 as dataSigChanEtsiFramerNonOctetErrors  
  Unsigned32 as dataSigChanEtsiFramerOverruns  
  Unsigned32 as dataSigChanEtsiFramerUnderruns  
  Unsigned32 as dataSigChanEtsiFramerLargeFrmErrors