Nortel-Magellan-Passport-FrTraceRcvrMIB

File: Nortel-Magellan-Passport-FrTraceRcvrMIB.mib (67646 bytes)

Imported modules

RFC-1212 Nortel-Magellan-Passport-UsefulDefinitionsMIB Nortel-Magellan-Passport-StandardTextualConventionsMIB
Nortel-Magellan-Passport-TextualConventionsMIB Nortel-Magellan-Passport-TraceBaseMIB

Imported symbols

OBJECT-TYPE passportMIBs RowPointer
DisplayString StorageType RowStatus
Integer32 Unsigned32 AsciiString
Hex NonReplicated HexString
EnterpriseDateAndTime DigitString traceSessionIndex
traceRcvrIndex traceSession traceIndex
traceRcvr

Defined Objects

traceRcvrFr 1.3.6.1.4.1.562.2.4.1.106.2.3
OBJECT IDENTIFIER    

traceRcvrFrRowStatusTable 1.3.6.1.4.1.562.2.4.1.106.2.3.1
This entry controls the addition and deletion of traceRcvrFr components.
OBJECT-TYPE    
  SEQUENCE OF  
    TraceRcvrFrRowStatusEntry

traceRcvrFrRowStatusEntry 1.3.6.1.4.1.562.2.4.1.106.2.3.1.1
A single entry in the table represents a single traceRcvrFr component.
OBJECT-TYPE    
  TraceRcvrFrRowStatusEntry  

traceRcvrFrRowStatus 1.3.6.1.4.1.562.2.4.1.106.2.3.1.1.1
This variable is used as the basis for SNMP naming of traceRcvrFr components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

traceRcvrFrComponentName 1.3.6.1.4.1.562.2.4.1.106.2.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

traceRcvrFrStorageType 1.3.6.1.4.1.562.2.4.1.106.2.3.1.1.4
This variable represents the storage type value for the traceRcvrFr tables.
OBJECT-TYPE    
  StorageType  

traceRcvrFrIndex 1.3.6.1.4.1.562.2.4.1.106.2.3.1.1.10
This variable represents the index for the traceRcvrFr tables.
OBJECT-TYPE    
  NonReplicated  

traceRcvrFrDna 1.3.6.1.4.1.562.2.4.1.106.2.3.2
OBJECT IDENTIFIER    

traceRcvrFrDnaRowStatusTable 1.3.6.1.4.1.562.2.4.1.106.2.3.2.1
This entry controls the addition and deletion of traceRcvrFrDna components.
OBJECT-TYPE    
  SEQUENCE OF  
    TraceRcvrFrDnaRowStatusEntry

traceRcvrFrDnaRowStatusEntry 1.3.6.1.4.1.562.2.4.1.106.2.3.2.1.1
A single entry in the table represents a single traceRcvrFrDna component.
OBJECT-TYPE    
  TraceRcvrFrDnaRowStatusEntry  

traceRcvrFrDnaRowStatus 1.3.6.1.4.1.562.2.4.1.106.2.3.2.1.1.1
This variable is used as the basis for SNMP naming of traceRcvrFrDna components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

traceRcvrFrDnaComponentName 1.3.6.1.4.1.562.2.4.1.106.2.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

traceRcvrFrDnaStorageType 1.3.6.1.4.1.562.2.4.1.106.2.3.2.1.1.4
This variable represents the storage type value for the traceRcvrFrDna tables.
OBJECT-TYPE    
  StorageType  

traceRcvrFrDnaIndex 1.3.6.1.4.1.562.2.4.1.106.2.3.2.1.1.10
This variable represents the index for the traceRcvrFrDna tables.
OBJECT-TYPE    
  NonReplicated  

traceRcvrFrDnaCug 1.3.6.1.4.1.562.2.4.1.106.2.3.2.2
OBJECT IDENTIFIER    

traceRcvrFrDnaCugRowStatusTable 1.3.6.1.4.1.562.2.4.1.106.2.3.2.2.1
This entry controls the addition and deletion of traceRcvrFrDnaCug components.
OBJECT-TYPE    
  SEQUENCE OF  
    TraceRcvrFrDnaCugRowStatusEntry

traceRcvrFrDnaCugRowStatusEntry 1.3.6.1.4.1.562.2.4.1.106.2.3.2.2.1.1
A single entry in the table represents a single traceRcvrFrDnaCug component.
OBJECT-TYPE    
  TraceRcvrFrDnaCugRowStatusEntry  

traceRcvrFrDnaCugRowStatus 1.3.6.1.4.1.562.2.4.1.106.2.3.2.2.1.1.1
This variable is used as the basis for SNMP naming of traceRcvrFrDnaCug components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

traceRcvrFrDnaCugComponentName 1.3.6.1.4.1.562.2.4.1.106.2.3.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

traceRcvrFrDnaCugStorageType 1.3.6.1.4.1.562.2.4.1.106.2.3.2.2.1.1.4
This variable represents the storage type value for the traceRcvrFrDnaCug tables.
OBJECT-TYPE    
  StorageType  

traceRcvrFrDnaCugIndex 1.3.6.1.4.1.562.2.4.1.106.2.3.2.2.1.1.10
This variable represents the index for the traceRcvrFrDnaCug tables.
OBJECT-TYPE    
  Integer32 1..1  

traceRcvrFrDnaCugCugOptionsTable 1.3.6.1.4.1.562.2.4.1.106.2.3.2.2.10
Attributes in this group define ClosedUserGroup options associated with interlockCode. Dnas with the same CUG (interlockCode) can make calls within this group. Various combinations of attributes are defined under this option which permit or prevent calls in the same CUG group.
OBJECT-TYPE    
  SEQUENCE OF  
    TraceRcvrFrDnaCugCugOptionsEntry

traceRcvrFrDnaCugCugOptionsEntry 1.3.6.1.4.1.562.2.4.1.106.2.3.2.2.10.1
An entry in the traceRcvrFrDnaCugCugOptionsTable.
OBJECT-TYPE    
  TraceRcvrFrDnaCugCugOptionsEntry  

traceRcvrFrDnaCugType 1.3.6.1.4.1.562.2.4.1.106.2.3.2.2.10.1.1
This attribute specifies the CUG type as either national or international. A national CUG has significance within the local network only. An international CUG has significance across network boundaries.
OBJECT-TYPE    
  INTEGER national(0), international(1)  

traceRcvrFrDnaCugDnic 1.3.6.1.4.1.562.2.4.1.106.2.3.2.2.10.1.2
This attribute specifies the Data Network ID Code of the network that is administering the international CUG. This attribute is not used for a national CUG and should be left at its default value. The dnic value is not an arbitrary number. It is assigned by international agreement and controlled by ITU-T.
OBJECT-TYPE    
  DigitString SIZE(4)  

traceRcvrFrDnaCugInterlockCode 1.3.6.1.4.1.562.2.4.1.106.2.3.2.2.10.1.3
This attribute specifies a numeric identifier of a national or international closed user group. It is an arbitrary number. This attribute may also be called CUG in some descriptions. Dnas defined with this number can only make calls to Dnas defined with the same interlockCode.
OBJECT-TYPE    
  Unsigned32 0..65535  

traceRcvrFrDnaCugPreferential 1.3.6.1.4.1.562.2.4.1.106.2.3.2.2.10.1.4
This attribute specifies that this Cug is to be used on all outgoing calls to the Frame Relay trace receiver.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

traceRcvrFrDnaCugOutCalls 1.3.6.1.4.1.562.2.4.1.106.2.3.2.2.10.1.5
This attribute specifies that outgoing calls (from the DTE into the network) can be made using this particular Cug.
OBJECT-TYPE    
  INTEGER disallowed(0), allowed(1)  

traceRcvrFrDnaCugIncCalls 1.3.6.1.4.1.562.2.4.1.106.2.3.2.2.10.1.6
This attribute specifies that incoming calls (from the network to the DTE) cannot be accepted using this Cug.
OBJECT-TYPE    
  INTEGER disallowed(0), allowed(1)  

traceRcvrFrDnaCugPrivileged 1.3.6.1.4.1.562.2.4.1.106.2.3.2.2.10.1.7
This attribute specifies that this Cug is privileged. For a call between two closed user group Dnas to connect, at least one Dna must have a privileged Cug.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

traceRcvrFrDnaAddressTable 1.3.6.1.4.1.562.2.4.1.106.2.3.2.10
This group contains attributes common to all Dnas. This group is composed of two attributes which define a Dna. These attributes are used to interpret the format of the address digits.
OBJECT-TYPE    
  SEQUENCE OF  
    TraceRcvrFrDnaAddressEntry

traceRcvrFrDnaAddressEntry 1.3.6.1.4.1.562.2.4.1.106.2.3.2.10.1
An entry in the traceRcvrFrDnaAddressTable.
OBJECT-TYPE    
  TraceRcvrFrDnaAddressEntry  

traceRcvrFrDnaNumberingPlanIndicator 1.3.6.1.4.1.562.2.4.1.106.2.3.2.10.1.1
This attribute specifies the Numbering Plan Indicator (NPI) of the Dna that is entered. The address may belong to an E.164 or X.121 plan.
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

traceRcvrFrDnaDataNetworkAddress 1.3.6.1.4.1.562.2.4.1.106.2.3.2.10.1.2
The Dna attribute contains digits which form a unique identifier for the calling end of the trace connection. Dna digits are selected and assigned by network operators. The maximum Dna length is 15 digits.
OBJECT-TYPE    
  DigitString SIZE(1..15)  

traceRcvrFrDnaOutgoingOptionsTable 1.3.6.1.4.1.562.2.4.1.106.2.3.2.11
This group defines the call options for outgoing calls.
OBJECT-TYPE    
  SEQUENCE OF  
    TraceRcvrFrDnaOutgoingOptionsEntry

traceRcvrFrDnaOutgoingOptionsEntry 1.3.6.1.4.1.562.2.4.1.106.2.3.2.11.1
An entry in the traceRcvrFrDnaOutgoingOptionsTable.
OBJECT-TYPE    
  TraceRcvrFrDnaOutgoingOptionsEntry  

traceRcvrFrDnaOutCalls 1.3.6.1.4.1.562.2.4.1.106.2.3.2.11.1.1
This attribute specifies that outgoing calls (from the DTE to the network) can be made using this particular Dna component.
OBJECT-TYPE    
  INTEGER disallowed(0), allowed(1)  

traceRcvrFrDnaOutDefaultPriority 1.3.6.1.4.1.562.2.4.1.106.2.3.2.11.1.7
If this attribute is set to normal, then the default priority for outgoing calls (from the DTE to the network) using this particular Dna is normal priority when the priority is not specified in the call. If this attribute is set to high then the default priority for outgoing calls using this particular Dna is high priority.
OBJECT-TYPE    
  INTEGER normal(0), high(1)  

traceRcvrFrDnaOutIntl 1.3.6.1.4.1.562.2.4.1.106.2.3.2.11.1.8
This attribute specifies that outgoing international calls (from the DTE to the network) can be made using this particular Dna. This attribute also controls access to another numbering plan, and specifies that cross-numbering plan calls are allowed.
OBJECT-TYPE    
  INTEGER disallowed(0), allowed(1)  

traceRcvrFrDnaOutDefaultPathReliability 1.3.6.1.4.1.562.2.4.1.106.2.3.2.11.1.14
This attribute specifies the default reliability class of routing for all calls (from the DTE to the network) using this particular Dna. The chosen default reliability class of routing normally applies to all packets (including the call packets) travelling into the network. A value of high specifies that packets are to be overflowed or retransmitted at various routing levels. Typically high reliability results in duplication and disordering of packets in the network, when errors are detected or during link congestion. The VC handles the duplication and disordering to ensure that packets are delivered to the interface in the proper sequence and without duplication.
OBJECT-TYPE    
  INTEGER high(0), normal(1)  

traceRcvrFrDnaOutPathReliabilityOverRide 1.3.6.1.4.1.562.2.4.1.106.2.3.2.11.1.15
This attribute specifies that the called end of the connection will not use the calling end provisioning data for reliability class of routing to override the provisioning data at the called end.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

traceRcvrFrDnaOutPathReliabilitySignal 1.3.6.1.4.1.562.2.4.1.106.2.3.2.11.1.16
This attribute specifies that reliability routing signaling is not used.
OBJECT-TYPE    
  INTEGER disallowed(0), allowed(1)  

traceRcvrFrDnaOutAccess 1.3.6.1.4.1.562.2.4.1.106.2.3.2.11.1.17
This attribute is an extension of the Closed User Group (CUG) facility. If this attribute is set to a value of allowed, it specifies that outgoing calls (from the DTE to the network) to the open (non- CUG) part of the network are permitted. It also permits outgoing calls to interfaces that have Incoming Access capabilities. If set to a value of disallowed, then such calls cannot be made using this Dna (the calls will be cleared by the local DCE). This attribute corresponds to the ITU-T 'Closed User Group with Outgoing Access' feature.
OBJECT-TYPE    
  INTEGER disallowed(0), allowed(1)  

traceRcvrFrDnaIncomingOptionsTable 1.3.6.1.4.1.562.2.4.1.106.2.3.2.12
This group defines the call options for incoming calls.
OBJECT-TYPE    
  SEQUENCE OF  
    TraceRcvrFrDnaIncomingOptionsEntry

traceRcvrFrDnaIncomingOptionsEntry 1.3.6.1.4.1.562.2.4.1.106.2.3.2.12.1
An entry in the traceRcvrFrDnaIncomingOptionsTable.
OBJECT-TYPE    
  TraceRcvrFrDnaIncomingOptionsEntry  

traceRcvrFrDnaIncCalls 1.3.6.1.4.1.562.2.4.1.106.2.3.2.12.1.1
This attribute specifies that incoming calls (from the network to the DTE) cannot be made to this Dna.
OBJECT-TYPE    
  INTEGER disallowed(0), allowed(1)  

traceRcvrFrDnaCallOptionsTable 1.3.6.1.4.1.562.2.4.1.106.2.3.2.13
The CallOptions group defines additional options for calls which are not specific to the direction of the call.
OBJECT-TYPE    
  SEQUENCE OF  
    TraceRcvrFrDnaCallOptionsEntry

traceRcvrFrDnaCallOptionsEntry 1.3.6.1.4.1.562.2.4.1.106.2.3.2.13.1
An entry in the traceRcvrFrDnaCallOptionsTable.
OBJECT-TYPE    
  TraceRcvrFrDnaCallOptionsEntry  

traceRcvrFrDnaPacketSizes 1.3.6.1.4.1.562.2.4.1.106.2.3.2.13.1.2
This attribute specifies the allowable packet sizes supported for calls using this Dna. Description of bits: n16(0) n32(1) n64(2) n128(3) n256(4) n512(5) n1024(6) n2048(7) n4096(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

traceRcvrFrDnaDefaultRecvFrmNetworkPacketSize 1.3.6.1.4.1.562.2.4.1.106.2.3.2.13.1.3
This attribute specifies the default local receive packet size from network to DTE for calls using this particular Dna.
OBJECT-TYPE    
  INTEGER n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12)  

traceRcvrFrDnaDefaultSendToNetworkPacketSize 1.3.6.1.4.1.562.2.4.1.106.2.3.2.13.1.4
This attribute specifies the default local send packet size from DTE to network for all calls using this particular Dna.
OBJECT-TYPE    
  INTEGER n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12)  

traceRcvrFrDnaCugFormat 1.3.6.1.4.1.562.2.4.1.106.2.3.2.13.1.10
This attribute specifies the format to signal CUG indices as basic or extended. A basic CUG index format is two digits long. An extended CUG index format is four digits long.
OBJECT-TYPE    
  INTEGER basic(0), extended(1)  

traceRcvrFrDc 1.3.6.1.4.1.562.2.4.1.106.2.3.3
OBJECT IDENTIFIER    

traceRcvrFrDcRowStatusTable 1.3.6.1.4.1.562.2.4.1.106.2.3.3.1
This entry controls the addition and deletion of traceRcvrFrDc components.
OBJECT-TYPE    
  SEQUENCE OF  
    TraceRcvrFrDcRowStatusEntry

traceRcvrFrDcRowStatusEntry 1.3.6.1.4.1.562.2.4.1.106.2.3.3.1.1
A single entry in the table represents a single traceRcvrFrDc component.
OBJECT-TYPE    
  TraceRcvrFrDcRowStatusEntry  

traceRcvrFrDcRowStatus 1.3.6.1.4.1.562.2.4.1.106.2.3.3.1.1.1
This variable is used as the basis for SNMP naming of traceRcvrFrDc components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

traceRcvrFrDcComponentName 1.3.6.1.4.1.562.2.4.1.106.2.3.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

traceRcvrFrDcStorageType 1.3.6.1.4.1.562.2.4.1.106.2.3.3.1.1.4
This variable represents the storage type value for the traceRcvrFrDc tables.
OBJECT-TYPE    
  StorageType  

traceRcvrFrDcIndex 1.3.6.1.4.1.562.2.4.1.106.2.3.3.1.1.10
This variable represents the index for the traceRcvrFrDc tables.
OBJECT-TYPE    
  NonReplicated  

traceRcvrFrDcOptionsTable 1.3.6.1.4.1.562.2.4.1.106.2.3.3.10
The Options group defines attributes associated with the SVC direct call.
OBJECT-TYPE    
  SEQUENCE OF  
    TraceRcvrFrDcOptionsEntry

traceRcvrFrDcOptionsEntry 1.3.6.1.4.1.562.2.4.1.106.2.3.3.10.1
An entry in the traceRcvrFrDcOptionsTable.
OBJECT-TYPE    
  TraceRcvrFrDcOptionsEntry  

traceRcvrFrDcRemoteNpi 1.3.6.1.4.1.562.2.4.1.106.2.3.3.10.1.3
This attribute indicates the numbering plan used for the remoteDna.
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

traceRcvrFrDcRemoteDna 1.3.6.1.4.1.562.2.4.1.106.2.3.3.10.1.4
This attribute specifies the Data Network Address of the remote end of the connection. This is the DNA of the Frame Relay trace receiver which will receive the trace data.
OBJECT-TYPE    
  DigitString SIZE(1..15)  

traceRcvrFrDcType 1.3.6.1.4.1.562.2.4.1.106.2.3.3.10.1.6
This attribute specifies the type of call as switched. For a switched call, no information is defined at the remote end about the local end of the connection.
OBJECT-TYPE    
  INTEGER switched(0), permanentMaster(1), permanentSlave(2), permanentBackupSlave(3)  

traceRcvrFrDcUserData 1.3.6.1.4.1.562.2.4.1.106.2.3.3.10.1.8
This attribute contains the user data. It is a 0 to 16 byte length string which is appended to the call request packet that is presented to the called (destination) DTE.
OBJECT-TYPE    
  HexString SIZE(0..16)  

traceSessionFr 1.3.6.1.4.1.562.2.4.1.106.3.3
OBJECT IDENTIFIER    

traceSessionFrRowStatusTable 1.3.6.1.4.1.562.2.4.1.106.3.3.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of traceSessionFr components.
OBJECT-TYPE    
  SEQUENCE OF  
    TraceSessionFrRowStatusEntry

traceSessionFrRowStatusEntry 1.3.6.1.4.1.562.2.4.1.106.3.3.1.1
A single entry in the table represents a single traceSessionFr component.
OBJECT-TYPE    
  TraceSessionFrRowStatusEntry  

traceSessionFrRowStatus 1.3.6.1.4.1.562.2.4.1.106.3.3.1.1.1
This variable is used as the basis for SNMP naming of traceSessionFr components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

traceSessionFrComponentName 1.3.6.1.4.1.562.2.4.1.106.3.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

traceSessionFrStorageType 1.3.6.1.4.1.562.2.4.1.106.3.3.1.1.4
This variable represents the storage type value for the traceSessionFr tables.
OBJECT-TYPE    
  StorageType  

traceSessionFrIndex 1.3.6.1.4.1.562.2.4.1.106.3.3.1.1.10
This variable represents the index for the traceSessionFr tables.
OBJECT-TYPE    
  NonReplicated  

traceSessionFrVc 1.3.6.1.4.1.562.2.4.1.106.3.3.2
OBJECT IDENTIFIER    

traceSessionFrVcRowStatusTable 1.3.6.1.4.1.562.2.4.1.106.3.3.2.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of traceSessionFrVc components.
OBJECT-TYPE    
  SEQUENCE OF  
    TraceSessionFrVcRowStatusEntry

traceSessionFrVcRowStatusEntry 1.3.6.1.4.1.562.2.4.1.106.3.3.2.1.1
A single entry in the table represents a single traceSessionFrVc component.
OBJECT-TYPE    
  TraceSessionFrVcRowStatusEntry  

traceSessionFrVcRowStatus 1.3.6.1.4.1.562.2.4.1.106.3.3.2.1.1.1
This variable is used as the basis for SNMP naming of traceSessionFrVc components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

traceSessionFrVcComponentName 1.3.6.1.4.1.562.2.4.1.106.3.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

traceSessionFrVcStorageType 1.3.6.1.4.1.562.2.4.1.106.3.3.2.1.1.4
This variable represents the storage type value for the traceSessionFrVc tables.
OBJECT-TYPE    
  StorageType  

traceSessionFrVcIndex 1.3.6.1.4.1.562.2.4.1.106.3.3.2.1.1.10
This variable represents the index for the traceSessionFrVc tables.
OBJECT-TYPE    
  NonReplicated  

traceSessionFrVcCadTable 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group represents operational call data related to Frame Relay Vc. It can be displayed only for Frame Relay Vc which is created by application.
OBJECT-TYPE    
  SEQUENCE OF  
    TraceSessionFrVcCadEntry

traceSessionFrVcCadEntry 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1
An entry in the traceSessionFrVcCadTable.
OBJECT-TYPE    
  TraceSessionFrVcCadEntry  

traceSessionFrVcType 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.1
This attribute displays the type of call, pvc,svc or spvc.
OBJECT-TYPE    
  INTEGER svc(0), pvc(1), spvc(2)  

traceSessionFrVcState 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.2
This attribute displays the state of call control. P5 state is not supported but is listed for completness. Transitions from one state to another take very short time. state most often displayed is dataTransferP4.
OBJECT-TYPE    
  INTEGER creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8)  

traceSessionFrVcPreviousState 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.3
This attribute displays the previous state of call control. This is a valuable field to determine how the processing is progressing.
OBJECT-TYPE    
  INTEGER creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8)  

traceSessionFrVcDiagnosticCode 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.4
This attribute displays the internal substate of call control. It is used to further refine state of call processing.
OBJECT-TYPE    
  Unsigned32 0..255  

traceSessionFrVcPreviousDiagnosticCode 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.5
This attribute displays the internal substate of call control. It is used to further refine state of call processing.
OBJECT-TYPE    
  Unsigned32 0..255  

traceSessionFrVcCalledNpi 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.6
This attribute displays the Numbering Plan Indicator (NPI) of the called end.
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

traceSessionFrVcCalledDna 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.7
This attribute displays the Data Network Address (Dna) of the called (destination) DTE to which this call is sent. This address if defined at recieving end will complete Vc connection.
OBJECT-TYPE    
  DigitString SIZE(1..15)  

traceSessionFrVcCalledLcn 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.8
This attribute displays the Logical Channel Number of the called end. It is valid only after both ends of Vc exchanged relevant information.
OBJECT-TYPE    
  Unsigned32 1..65535  

traceSessionFrVcCallingNpi 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.9
This attribute displays the Numbering Plan Indicator (NPI) of the calling end.
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

traceSessionFrVcCallingDna 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.10
This attribute displays the Data Network Address (Dna) of the calling end.
OBJECT-TYPE    
  DigitString SIZE(1..15)  

traceSessionFrVcCallingLcn 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.11
This attribute displays the Logical Channel Number of the calling end.
OBJECT-TYPE    
  Unsigned32 1..65535  

traceSessionFrVcAccountingEnabled 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.12
This attribute indicates that this optional section of accounting record is suppressed or permitted. If accountingEnabled is yes, conditions for generation of accounting record were met. These conditions include billing options, vc recovery conditions and Module wide accounting data options.
OBJECT-TYPE    
  INTEGER yes(0), no(1)  

traceSessionFrVcFastSelectCall 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.13
This attribute displays that this is a fast select call.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

traceSessionFrVcPathReliability 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.19
This attribute displays the path reliability.
OBJECT-TYPE    
  INTEGER high(0), normal(1)  

traceSessionFrVcAccountingEnd 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.20
This attribute indicates if this end should generate an accounting record. Normally, callingEnd is the end to generate an accounting record.
OBJECT-TYPE    
  INTEGER callingEnd(0), calledEnd(1)  

traceSessionFrVcPriority 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.21
This attribute displays whether the call is a normal or a high priority call.
OBJECT-TYPE    
  INTEGER normal(0), high(1)  

traceSessionFrVcSegmentSize 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.22
This attribute displays the segment size (in bytes) used on the call. It is used to calculate the number of segments transmitted and received.
OBJECT-TYPE    
  Unsigned32 0..4096  

traceSessionFrVcMaxSubnetPktSize 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.27
This attribute indicates the maximum packet size allowed on the Vc.
OBJECT-TYPE    
  Unsigned32 0..4096  

traceSessionFrVcRcosToNetwork 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.28
This attribute indicates the routing metric routing class of service to the network.
OBJECT-TYPE    
  INTEGER throughput(0), delay(1), multimedia(2)  

traceSessionFrVcRcosFromNetwork 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.29
This attribute displays the routing metric Routing Class of Service from the Network.
OBJECT-TYPE    
  INTEGER throughput(0), delay(1), multimedia(2)  

traceSessionFrVcEmissionPriorityToNetwork 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.30
This attribute displays the network internal emission priotity to the network.
OBJECT-TYPE    
  INTEGER normal(0), high(1), interrupting(2)  

traceSessionFrVcEmissionPriorityFromNetwork 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.31
This attribute displays the network internal emission priotity from the network.
OBJECT-TYPE    
  INTEGER normal(0), high(1), interrupting(2)  

traceSessionFrVcDataPath 1.3.6.1.4.1.562.2.4.1.106.3.3.2.10.1.32
This attribute indicates the data path used by the connection. The data path is provisioned in Dna and DirectCall components. The displayed value of this attribute can be different from the provisioned value. If the connection is using dprsOnly data path, the string dprsOnly is displayed. (dynamic packet routing system) If the connection is using dprsMcsOnly data path, the string dprsMcsOnly is displayed. If the connection is using dprsMcsFirst data path, the string dprsMcsFirst is displayed.
OBJECT-TYPE    
  AsciiString SIZE(0..32)  

traceSessionFrVcIntdTable 1.3.6.1.4.1.562.2.4.1.106.3.3.2.11
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group defines display of interval data collected by Vc. Data in this group is variable and may depend on time when this display command is issued.
OBJECT-TYPE    
  SEQUENCE OF  
    TraceSessionFrVcIntdEntry

traceSessionFrVcIntdEntry 1.3.6.1.4.1.562.2.4.1.106.3.3.2.11.1
An entry in the traceSessionFrVcIntdTable.
OBJECT-TYPE    
  TraceSessionFrVcIntdEntry  

traceSessionFrVcCallReferenceNumber 1.3.6.1.4.1.562.2.4.1.106.3.3.2.11.1.1
This attribute displays the call reference number which is a unique number generated by the switch.The same Call Reference Number is stored in the interval data (accounting record) at both ends of the call. It can be used as one of the attributes in matching duplicate records generated at each end of the call.
OBJECT-TYPE    
  Hex 0..16777215  

traceSessionFrVcElapsedTimeTillNow 1.3.6.1.4.1.562.2.4.1.106.3.3.2.11.1.2
This attribute displays the elapsed time representing the period of this interval data. It is elapsed time in 0.1 second increments since Vc started.
OBJECT-TYPE    
  Unsigned32 0..16777215  

traceSessionFrVcSegmentsRx 1.3.6.1.4.1.562.2.4.1.106.3.3.2.11.1.3
This attribute displays the number of segments received at the time command was issued. This is the segment received count maintained by accounting at each end of the Vc. This counter is updated only when the packet cannot be successfully delivered out of the sink Vc and to the sink AP Conditions in which packets may be discarded by the sink Vc include: missing packets due to subnet discards, segmentation protocol violations due to subnet discard, duplicated and out-of-ranged packets and packets that arrive while Vc is in path recovery state.
OBJECT-TYPE    
  Unsigned32 0..16777215  

traceSessionFrVcSegmentsSent 1.3.6.1.4.1.562.2.4.1.106.3.3.2.11.1.4
This attribute displays the number of segments sent at the time command was issued. This is the segment sent count maintained by accounting at the source Vc. Vc only counts packets that Vc thinks can be delivered successfully into the subnet. In reality, these packets may be dropped by trunking, for instance. This counter is not updated when splitting fails, when Vc is in a path recovery state, when packet forwarding fails to forward this packet and when subsequent packets have to be discarded as we want to minimize the chance of out-of-sequence and do not intentionally send out-of- sequenced packets into the subnet.
OBJECT-TYPE    
  Unsigned32 0..16777215  

traceSessionFrVcStartTime 1.3.6.1.4.1.562.2.4.1.106.3.3.2.11.1.5
This attribute displays the start time of this interval period. If Vc spans 12 hour time or time of day change startTime reflects new time as recorded at 12 hour periods or time of day changes.
OBJECT-TYPE    
  EnterpriseDateAndTime SIZE(0 | 19)  

traceSessionFrVcFrdTable 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group defines Frame Relay attributes collected by Frame Relay Vc. The purpose of Vc attributes is to aid end users and verification people to understand the Vc internal behavior. This is particularly useful when the network has experienced abnormality and we want to isolate problems and pinpoint trouble spots. Attributes are collected on a per Vc basis. Until a need is identified, statistics are not collected at a processor level. Each attribute is stored in a 32 bit field and is initialized to zero when a Vc enters into the data transfer state. When a PVC is disconnected and then connected again, the attributes will be reset. Attributes cannot be reset through other methods. Frame Relay Vc uses a best effort data packet delivery protocol and a different packet segmentation and combination methods from the General Vc. The Frame Relay Vc uses the same call setup and control mechanism (e.g. the support of non-flow control data packets) as in a General Vc. Most General Vc statistics and internal variables are used in a Frame Relay Vc and are displayed by software developers
OBJECT-TYPE    
  SEQUENCE OF  
    TraceSessionFrVcFrdEntry

traceSessionFrVcFrdEntry 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1
An entry in the traceSessionFrVcFrdTable.
OBJECT-TYPE    
  TraceSessionFrVcFrdEntry  

traceSessionFrVcFrmCongestedToSubnet 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.2
This attribute displays the number of frames from link discarded due to lack of resources. It keeps track of the number of frames from link that have to be discarded. The discard reasons include insufficient memory for splitting the frame into smaller subnet packet size.
OBJECT-TYPE    
  Unsigned32 0..5000  

traceSessionFrVcCannotForwardToSubnet 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.3
This attribute displays the number of discarded packets that can not be forwarded into the subnet because of subnet congestion. Number of frames from link discarded due to failure in forwarding a packet from Vc into the subnet.- This attribute is increased when packet forwarding fails to forward a packet into the subnet. If a frame is split into multiple subnet packets and a partial packet has to be discarded, all subsequent partial packets that have not yet been delivered to the subnet will be discarded as well.
OBJECT-TYPE    
  Unsigned32 0..5000  

traceSessionFrVcNotDataXferToSubnet 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.4
This attribute records the number of frames from link discarded when the Vc tries to recover from internal path failure.
OBJECT-TYPE    
  Unsigned32 0..5000  

traceSessionFrVcOutOfRangeFrmFromSubnet 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.5
This attribute displays the number of frames from subnet discarded due to out of sequence range for arriving too late.
OBJECT-TYPE    
  Unsigned32 0..5000  

traceSessionFrVcCombErrorsFromSubnet 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.6
This attribute records the number of subnet packets discarded at the sink Vc due to the Vc segmentation and combination protocol error. Usually, this occurs when the subnet discards packets and thus this statistics can be used to guest the number of subnet packets that are not delivered to the Vc. It cannot be used as an actual measure because some subnet packets may have been delivered to Vc but have to be discarded because these are partial packets to a frame in which some other partial packets have not been properly delivered to Vc
OBJECT-TYPE    
  Unsigned32 0..5000  

traceSessionFrVcDuplicatesFromSubnet 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.7
This attribute displays the number of subnet packets discarded due to duplication. Although packets are not retransmitted by the Frame Relay Vc, it is possible for the subnet to retransmit packets. When packets are out-of-sequenced and copies of the same packets arrive, then this attribute is increased.
OBJECT-TYPE    
  Unsigned32 0..5000  

traceSessionFrVcNotDataXferFromSubnet 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.8
This attribute displays the number of subnet packets discarded when data transfer is suspended in Vc recovery.
OBJECT-TYPE    
  Unsigned32 0..5000  

traceSessionFrVcFrmLossTimeouts 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.9
This attribute displays the number of lost frame timer expiries. When this count is excessive, the network is very congested and packets have been discarded in the subnet.
OBJECT-TYPE    
  Unsigned32 0..5000  

traceSessionFrVcOoSeqByteCntExceeded 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.10
This attribute displays the number times that the out of sequence byte threshold is exceeded. When the threshold is exceeded, this condition is treated as if the loss frame timer has expired and all frames queued at the sink Vc are delivered to the AP. We need to keep this count to examine if the threshold is engineered properly. This should be used in conjunction with the peak value of out-of- sequenced queue and the number of times the loss frame timer has expired. This count should be relatively small when compared with loss frame timer expiry count.
OBJECT-TYPE    
  Unsigned32 0..5000  

traceSessionFrVcPeakOoSeqPktCount 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.11
This attribute displays the frame relay peak packet count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced queue. The counter can be used to deduce the message buffer requirement on a Vc.
OBJECT-TYPE    
  Unsigned32 0..5000  

traceSessionFrVcPeakOoSeqFrmForwarded 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.12
This attribute displays the frame relay peak size of the sequence packet queue. The subnet may deliver packets out-of- sequenced. These packets are then queued in an out-of-sequenced queue, waiting for a packet with the expected sequence number to come. When that packet arrives, this attribute records the maximum number of packets that were out-of-sequenced, but now have become in-sequenced. The statistics is used to measure expected queue size due to normal subnet packet disorder (not due to subnet packet discard). Current implementation also uses this statistics to set a maximum size for the out-of-sequenced queue.
OBJECT-TYPE    
  Unsigned32 0..5000  

traceSessionFrVcSendSequenceNumber 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.13
This attribute displays the Vc internal packet's send sequence number. Note that a 'packet' in this context, may be either a user data packet, or an OAM frame.
OBJECT-TYPE    
  Unsigned32 0..5000  

traceSessionFrVcPktRetryTimeouts 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.15
This attribute displays the number of packets which have retransmission time-outs. When this count is excessive, the network is very congested and packets have been discarded in the subnet.
OBJECT-TYPE    
  Unsigned32 0..5000  

traceSessionFrVcPeakRetryQueueSize 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.16
This attribute displays the peak size of retransmission queue. This attribute is used as an indicator of the acknowledgment behavior across the subnet. Records the largest body of unacknowledged packets.
OBJECT-TYPE    
  Unsigned32 0..5000  

traceSessionFrVcSubnetRecoveries 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.17
This attribute displays the number of successful Vc recovery attempts.
OBJECT-TYPE    
  Unsigned32 0..5000  

traceSessionFrVcOoSeqPktCntExceeded 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.19
This attribute displays the number times that the out of sequence packet threshold is exceeded. When the threshold is exceeded, this condition is treated as if the loss frame timer has expired and all frames queued at the sink Vc are delivered to the AP. We need to keep this count to examine if the threshold is engineered properly. This should be used in conjunction with the peak value of out-of- sequenced queue and the number of times the loss frame timer has expired. This count should be relatively small when compared with loss frame timer expiry count.
OBJECT-TYPE    
  Unsigned32 0..255  

traceSessionFrVcPeakOoSeqByteCount 1.3.6.1.4.1.562.2.4.1.106.3.3.2.12.1.20
This attribute displays the frame relay peak byte count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced queue. The counter can be used to deduce the message buffer requirement on a Vc.
OBJECT-TYPE    
  Unsigned32 0..50000  

traceSessionFrVcDmepTable 1.3.6.1.4.1.562.2.4.1.106.3.3.2.417
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute displays the data path used by the connection. Data path is provisioned in Dna and DirectCall components. If the connection is using dprsOnly data path, this attribute is empty. If the connection is using dprsMcsOnly or dprsMcsFirst data path, this attribute displays component name of the dprsMcsEndPoint.
OBJECT-TYPE    
  SEQUENCE OF  
    TraceSessionFrVcDmepEntry

traceSessionFrVcDmepEntry 1.3.6.1.4.1.562.2.4.1.106.3.3.2.417.1
An entry in the traceSessionFrVcDmepTable.
OBJECT-TYPE    
  TraceSessionFrVcDmepEntry  

traceSessionFrVcDmepValue 1.3.6.1.4.1.562.2.4.1.106.3.3.2.417.1.1
This variable represents both the value and the index for the traceSessionFrVcDmepTable.
OBJECT-TYPE    
  RowPointer  

frTraceRcvrMIB 1.3.6.1.4.1.562.2.4.2.139
OBJECT IDENTIFIER    

frTraceRcvrGroup 1.3.6.1.4.1.562.2.4.2.139.1
OBJECT IDENTIFIER    

frTraceRcvrGroupBE 1.3.6.1.4.1.562.2.4.2.139.1.5
OBJECT IDENTIFIER    

frTraceRcvrGroupBE01 1.3.6.1.4.1.562.2.4.2.139.1.5.2
OBJECT IDENTIFIER    

frTraceRcvrGroupBE01A 1.3.6.1.4.1.562.2.4.2.139.1.5.2.2
OBJECT IDENTIFIER    

frTraceRcvrCapabilities 1.3.6.1.4.1.562.2.4.2.139.3
OBJECT IDENTIFIER    

frTraceRcvrCapabilitiesBE 1.3.6.1.4.1.562.2.4.2.139.3.5
OBJECT IDENTIFIER    

frTraceRcvrCapabilitiesBE01 1.3.6.1.4.1.562.2.4.2.139.3.5.2
OBJECT IDENTIFIER    

frTraceRcvrCapabilitiesBE01A 1.3.6.1.4.1.562.2.4.2.139.3.5.2.2
OBJECT IDENTIFIER    

Defined Objects

TraceRcvrFrRowStatusEntry  
SEQUENCE    
  RowStatus as traceRcvrFrRowStatus  
  DisplayString as traceRcvrFrComponentName  
  StorageType as traceRcvrFrStorageType  
  NonReplicated as traceRcvrFrIndex  

TraceRcvrFrDnaRowStatusEntry  
SEQUENCE    
  RowStatus as traceRcvrFrDnaRowStatus  
  DisplayString as traceRcvrFrDnaComponentName  
  StorageType as traceRcvrFrDnaStorageType  
  NonReplicated as traceRcvrFrDnaIndex  

TraceRcvrFrDnaAddressEntry  
SEQUENCE    
  INTEGER as traceRcvrFrDnaNumberingPlanIndicator  
  DigitString as traceRcvrFrDnaDataNetworkAddress  

TraceRcvrFrDnaOutgoingOptionsEntry  
SEQUENCE    
  INTEGER as traceRcvrFrDnaOutCalls  
  INTEGER as traceRcvrFrDnaOutDefaultPriority  
  INTEGER as traceRcvrFrDnaOutIntl  
  INTEGER as traceRcvrFrDnaOutDefaultPathReliability  
  INTEGER as traceRcvrFrDnaOutPathReliabilityOverRide  
  INTEGER as traceRcvrFrDnaOutPathReliabilitySignal  
  INTEGER as traceRcvrFrDnaOutAccess  

TraceRcvrFrDnaIncomingOptionsEntry  
SEQUENCE    
  INTEGER as traceRcvrFrDnaIncCalls  

TraceRcvrFrDnaCallOptionsEntry  
SEQUENCE    
  OCTET STRING as traceRcvrFrDnaPacketSizes  
  INTEGER as traceRcvrFrDnaDefaultRecvFrmNetworkPacketSize  
  INTEGER as traceRcvrFrDnaDefaultSendToNetworkPacketSize  
  INTEGER as traceRcvrFrDnaCugFormat  

TraceRcvrFrDnaCugRowStatusEntry  
SEQUENCE    
  RowStatus as traceRcvrFrDnaCugRowStatus  
  DisplayString as traceRcvrFrDnaCugComponentName  
  StorageType as traceRcvrFrDnaCugStorageType  
  Integer32 as traceRcvrFrDnaCugIndex  

TraceRcvrFrDnaCugCugOptionsEntry  
SEQUENCE    
  INTEGER as traceRcvrFrDnaCugType  
  DigitString as traceRcvrFrDnaCugDnic  
  Unsigned32 as traceRcvrFrDnaCugInterlockCode  
  INTEGER as traceRcvrFrDnaCugPreferential  
  INTEGER as traceRcvrFrDnaCugOutCalls  
  INTEGER as traceRcvrFrDnaCugIncCalls  
  INTEGER as traceRcvrFrDnaCugPrivileged  

TraceRcvrFrDcRowStatusEntry  
SEQUENCE    
  RowStatus as traceRcvrFrDcRowStatus  
  DisplayString as traceRcvrFrDcComponentName  
  StorageType as traceRcvrFrDcStorageType  
  NonReplicated as traceRcvrFrDcIndex  

TraceRcvrFrDcOptionsEntry  
SEQUENCE    
  INTEGER as traceRcvrFrDcRemoteNpi  
  DigitString as traceRcvrFrDcRemoteDna  
  INTEGER as traceRcvrFrDcType  
  HexString as traceRcvrFrDcUserData  

TraceSessionFrRowStatusEntry  
SEQUENCE    
  RowStatus as traceSessionFrRowStatus  
  DisplayString as traceSessionFrComponentName  
  StorageType as traceSessionFrStorageType  
  NonReplicated as traceSessionFrIndex  

TraceSessionFrVcRowStatusEntry  
SEQUENCE    
  RowStatus as traceSessionFrVcRowStatus  
  DisplayString as traceSessionFrVcComponentName  
  StorageType as traceSessionFrVcStorageType  
  NonReplicated as traceSessionFrVcIndex  

TraceSessionFrVcCadEntry  
SEQUENCE    
  INTEGER as traceSessionFrVcType  
  INTEGER as traceSessionFrVcState  
  INTEGER as traceSessionFrVcPreviousState  
  Unsigned32 as traceSessionFrVcDiagnosticCode  
  Unsigned32 as traceSessionFrVcPreviousDiagnosticCode  
  INTEGER as traceSessionFrVcCalledNpi  
  DigitString as traceSessionFrVcCalledDna  
  Unsigned32 as traceSessionFrVcCalledLcn  
  INTEGER as traceSessionFrVcCallingNpi  
  DigitString as traceSessionFrVcCallingDna  
  Unsigned32 as traceSessionFrVcCallingLcn  
  INTEGER as traceSessionFrVcAccountingEnabled  
  INTEGER as traceSessionFrVcFastSelectCall  
  INTEGER as traceSessionFrVcPathReliability  
  INTEGER as traceSessionFrVcAccountingEnd  
  INTEGER as traceSessionFrVcPriority  
  Unsigned32 as traceSessionFrVcSegmentSize  
  Unsigned32 as traceSessionFrVcMaxSubnetPktSize  
  INTEGER as traceSessionFrVcRcosToNetwork  
  INTEGER as traceSessionFrVcRcosFromNetwork  
  INTEGER as traceSessionFrVcEmissionPriorityToNetwork  
  INTEGER as traceSessionFrVcEmissionPriorityFromNetwork  
  AsciiString as traceSessionFrVcDataPath  

TraceSessionFrVcIntdEntry  
SEQUENCE    
  Hex as traceSessionFrVcCallReferenceNumber  
  Unsigned32 as traceSessionFrVcElapsedTimeTillNow  
  Unsigned32 as traceSessionFrVcSegmentsRx  
  Unsigned32 as traceSessionFrVcSegmentsSent  
  EnterpriseDateAndTime as traceSessionFrVcStartTime  

TraceSessionFrVcFrdEntry  
SEQUENCE    
  Unsigned32 as traceSessionFrVcFrmCongestedToSubnet  
  Unsigned32 as traceSessionFrVcCannotForwardToSubnet  
  Unsigned32 as traceSessionFrVcNotDataXferToSubnet  
  Unsigned32 as traceSessionFrVcOutOfRangeFrmFromSubnet  
  Unsigned32 as traceSessionFrVcCombErrorsFromSubnet  
  Unsigned32 as traceSessionFrVcDuplicatesFromSubnet  
  Unsigned32 as traceSessionFrVcNotDataXferFromSubnet  
  Unsigned32 as traceSessionFrVcFrmLossTimeouts  
  Unsigned32 as traceSessionFrVcOoSeqByteCntExceeded  
  Unsigned32 as traceSessionFrVcPeakOoSeqPktCount  
  Unsigned32 as traceSessionFrVcPeakOoSeqFrmForwarded  
  Unsigned32 as traceSessionFrVcSendSequenceNumber  
  Unsigned32 as traceSessionFrVcPktRetryTimeouts  
  Unsigned32 as traceSessionFrVcPeakRetryQueueSize  
  Unsigned32 as traceSessionFrVcSubnetRecoveries  
  Unsigned32 as traceSessionFrVcOoSeqPktCntExceeded  
  Unsigned32 as traceSessionFrVcPeakOoSeqByteCount  

TraceSessionFrVcDmepEntry  
SEQUENCE    
  RowPointer as traceSessionFrVcDmepValue