Nortel-Magellan-Passport-LogicalProcessorMIB

File: Nortel-Magellan-Passport-LogicalProcessorMIB.mib (1117014 bytes)

Imported modules

RFC-1212 Nortel-Magellan-Passport-UsefulDefinitionsMIB Nortel-Magellan-Passport-StandardTextualConventionsMIB
Nortel-Magellan-Passport-TextualConventionsMIB

Imported symbols

OBJECT-TYPE components passportMIBs
Counter32 RowPointer DisplayString
StorageType RowStatus PassportCounter64
InterfaceIndex Gauge32 Integer32
Unsigned32 AsciiString Hex
NonReplicated EnterpriseDateAndTime Link

Defined Objects

lp 1.3.6.1.4.1.562.2.4.1.12
OBJECT IDENTIFIER    

lpRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.1
This entry controls the addition and deletion of lp components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpRowStatusEntry

lpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.1.1
A single entry in the table represents a single lp component.
OBJECT-TYPE    
  LpRowStatusEntry  

lpRowStatus 1.3.6.1.4.1.562.2.4.1.12.1.1.1
This variable is used as the basis for SNMP naming of lp components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

lpComponentName 1.3.6.1.4.1.562.2.4.1.12.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpStorageType 1.3.6.1.4.1.562.2.4.1.12.1.1.4
This variable represents the storage type value for the lp tables.
OBJECT-TYPE    
  StorageType  

lpIndex 1.3.6.1.4.1.562.2.4.1.12.1.1.10
This variable represents the index for the lp tables.
OBJECT-TYPE    
  Integer32 0..15  

lpDS3 1.3.6.1.4.1.562.2.4.1.12.5
OBJECT IDENTIFIER    

lpDS3RowStatusTable 1.3.6.1.4.1.562.2.4.1.12.5.1
This entry controls the addition and deletion of lpDS3 components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3RowStatusEntry

lpDS3RowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.5.1.1
A single entry in the table represents a single lpDS3 component.
OBJECT-TYPE    
  LpDS3RowStatusEntry  

lpDS3RowStatus 1.3.6.1.4.1.562.2.4.1.12.5.1.1.1
This variable is used as the basis for SNMP naming of lpDS3 components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

lpDS3ComponentName 1.3.6.1.4.1.562.2.4.1.12.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpDS3StorageType 1.3.6.1.4.1.562.2.4.1.12.5.1.1.4
This variable represents the storage type value for the lpDS3 tables.
OBJECT-TYPE    
  StorageType  

lpDS3Index 1.3.6.1.4.1.562.2.4.1.12.5.1.1.10
This variable represents the index for the lpDS3 tables.
OBJECT-TYPE    
  Integer32 0..2  

lpDS3Test 1.3.6.1.4.1.562.2.4.1.12.5.2
OBJECT IDENTIFIER    

lpDS3TestRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.5.2.1
This entry controls the addition and deletion of lpDS3Test components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3TestRowStatusEntry

lpDS3TestRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.5.2.1.1
A single entry in the table represents a single lpDS3Test component.
OBJECT-TYPE    
  LpDS3TestRowStatusEntry  

lpDS3TestRowStatus 1.3.6.1.4.1.562.2.4.1.12.5.2.1.1.1
This variable is used as the basis for SNMP naming of lpDS3Test components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpDS3TestComponentName 1.3.6.1.4.1.562.2.4.1.12.5.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpDS3TestStorageType 1.3.6.1.4.1.562.2.4.1.12.5.2.1.1.4
This variable represents the storage type value for the lpDS3Test tables.
OBJECT-TYPE    
  StorageType  

lpDS3TestIndex 1.3.6.1.4.1.562.2.4.1.12.5.2.1.1.10
This variable represents the index for the lpDS3Test tables.
OBJECT-TYPE    
  NonReplicated  

lpDS3TestStateTable 1.3.6.1.4.1.562.2.4.1.12.5.2.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3TestStateEntry

lpDS3TestStateEntry 1.3.6.1.4.1.562.2.4.1.12.5.2.10.1
An entry in the lpDS3TestStateTable.
OBJECT-TYPE    
  LpDS3TestStateEntry  

lpDS3TestAdminState 1.3.6.1.4.1.562.2.4.1.12.5.2.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpDS3TestOperationalState 1.3.6.1.4.1.562.2.4.1.12.5.2.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpDS3TestUsageState 1.3.6.1.4.1.562.2.4.1.12.5.2.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpDS3TestSetupTable 1.3.6.1.4.1.562.2.4.1.12.5.2.11
This group contains all of the operational data for a Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3TestSetupEntry

lpDS3TestSetupEntry 1.3.6.1.4.1.562.2.4.1.12.5.2.11.1
An entry in the lpDS3TestSetupTable.
OBJECT-TYPE    
  LpDS3TestSetupEntry  

lpDS3TestPurpose 1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.1
This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
OBJECT-TYPE    
  AsciiString SIZE(0..40)  

lpDS3TestType 1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.2
This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
OBJECT-TYPE    
  INTEGER card(0), manual(1), localLoop(2), remoteLoop(3), externalLoop(4), payloadLoop(5), remoteLoopThisTrib(6), v54RemoteLoop(7), pn127RemoteLoop(8)  

lpDS3TestFrmSize 1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.3
This attribute defines the size of the test data frames in number of bytes.
OBJECT-TYPE    
  Unsigned32 4..4096  

lpDS3TestFrmPatternType 1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.4
This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
OBJECT-TYPE    
  INTEGER ccitt32kBitPattern(0), ccitt8MBitPattern(1), customizedPattern(2)  

lpDS3TestCustomizedPattern 1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.5
This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
OBJECT-TYPE    
  Hex 0..4294967295  

lpDS3TestDataStartDelay 1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.6
This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
OBJECT-TYPE    
  Unsigned32 0..1814400  

lpDS3TestDisplayInterval 1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.7
This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
OBJECT-TYPE    
  Unsigned32 0..30240  

lpDS3TestDuration 1.3.6.1.4.1.562.2.4.1.12.5.2.11.1.8
This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
OBJECT-TYPE    
  Unsigned32 1..30240  

lpDS3TestResultsTable 1.3.6.1.4.1.562.2.4.1.12.5.2.12
This group contains all the statistics related attributes of the Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3TestResultsEntry

lpDS3TestResultsEntry 1.3.6.1.4.1.562.2.4.1.12.5.2.12.1
An entry in the lpDS3TestResultsTable.
OBJECT-TYPE    
  LpDS3TestResultsEntry  

lpDS3TestElapsedTime 1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.1
This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
OBJECT-TYPE    
  Counter32  

lpDS3TestTimeRemaining 1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.2
This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

lpDS3TestCauseOfTermination 1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.3
This attribute records the reason the test is terminated.
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4), hardwareReconfigured(5)  

lpDS3TestBitsTx 1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.4
This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpDS3TestBytesTx 1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.5
This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpDS3TestFrmTx 1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.6
This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpDS3TestBitsRx 1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.7
This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpDS3TestBytesRx 1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.8
This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpDS3TestFrmRx 1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.9
This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpDS3TestErroredFrmRx 1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.10
This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
OBJECT-TYPE    
  PassportCounter64  

lpDS3TestBitErrorRate 1.3.6.1.4.1.562.2.4.1.12.5.2.12.1.11
This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
OBJECT-TYPE    
  AsciiString SIZE(5)  

lpDS3CBit 1.3.6.1.4.1.562.2.4.1.12.5.3
OBJECT IDENTIFIER    

lpDS3CBitRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.5.3.1
This entry controls the addition and deletion of lpDS3CBit components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3CBitRowStatusEntry

lpDS3CBitRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.5.3.1.1
A single entry in the table represents a single lpDS3CBit component.
OBJECT-TYPE    
  LpDS3CBitRowStatusEntry  

lpDS3CBitRowStatus 1.3.6.1.4.1.562.2.4.1.12.5.3.1.1.1
This variable is used as the basis for SNMP naming of lpDS3CBit components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpDS3CBitComponentName 1.3.6.1.4.1.562.2.4.1.12.5.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpDS3CBitStorageType 1.3.6.1.4.1.562.2.4.1.12.5.3.1.1.4
This variable represents the storage type value for the lpDS3CBit tables.
OBJECT-TYPE    
  StorageType  

lpDS3CBitIndex 1.3.6.1.4.1.562.2.4.1.12.5.3.1.1.10
This variable represents the index for the lpDS3CBit tables.
OBJECT-TYPE    
  NonReplicated  

lpDS3CBitOperationalTable 1.3.6.1.4.1.562.2.4.1.12.5.3.10
This group contains the DS3 C-Bit Parity operational data for the CBIT component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3CBitOperationalEntry

lpDS3CBitOperationalEntry 1.3.6.1.4.1.562.2.4.1.12.5.3.10.1
An entry in the lpDS3CBitOperationalTable.
OBJECT-TYPE    
  LpDS3CBitOperationalEntry  

lpDS3CBitFarEndAlarm 1.3.6.1.4.1.562.2.4.1.12.5.3.10.1.1
This attribute indicates the Far-End alarm signal that is currently received at the DS3 interface. This signal is carried over the Far- End Alarm and Control (FEAC) bits of DS3 frames. Five far-end alarm signals can be received: far-end equipment failure that is received when the far-end terminal has detected a local equipment failure; far-end Loss Of Signal (LOS) that is received when the far- end DS3 terminal has declared a LOS failure condition; far-end Loss of Frame (LOF) when the far-end DS3 terminal has declared a Loss Of Frame (LOF) failure condition; far-end Alarm Indication Signal (AIS) when the far-end has declared an AIS failure condition; far-end Idle when the far-end has declared an Idle signal condition.
OBJECT-TYPE    
  INTEGER equipmentFailure(0), los(1), sef(2), ais(3), idle(4), none(5)  

lpDS3CBitLoopedbackToFarEnd 1.3.6.1.4.1.562.2.4.1.12.5.3.10.1.2
This indicates whether or not the DS3 component is currently looping back the incoming DS3 signal or one of its DS1 tributaries to the far-end DS3 terminal. This is activated when the far-end DS3 equipment has ordered the local terminal to do so. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) notused29(29) notused30(30) ds3Line(31)
OBJECT-TYPE    
  OCTET STRING SIZE(4)  

lpDS3CBitLoopbackAtFarEndRequested 1.3.6.1.4.1.562.2.4.1.12.5.3.10.1.3
This attribute indicates which DS1 tributaries are being looped back, or if the DS3 line is being looped back. Each value listed indicates a loopback request has been made. When a loopback deactivation command has been sent to the far end, the corresponding value will be removed from the list. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) notused29(29) notused30(30) ds3Line(31)
OBJECT-TYPE    
  OCTET STRING SIZE(4)  

lpDS3CBitStatsTable 1.3.6.1.4.1.562.2.4.1.12.5.3.11
This group contains the DS3 C-Bit Parity statistical data for the CBIT component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3CBitStatsEntry

lpDS3CBitStatsEntry 1.3.6.1.4.1.562.2.4.1.12.5.3.11.1
An entry in the lpDS3CBitStatsTable.
OBJECT-TYPE    
  LpDS3CBitStatsEntry  

lpDS3CBitCbitErrorFreeSec 1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.1
This attribute indicates the number of seconds that the DS3 port has not suffered any C-Bit errors.
OBJECT-TYPE    
  Counter32  

lpDS3CBitCbitCodeViolations 1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.2
This attribute indicates the total count of C-Bit Parity Code Violations (CCV). A CCV is obtained when the parity calculated over the previous DS3 frame and the value of the CP-bits appearing in the current DS3 frame differ. The value of this attribute will wrap around to 0 if it does reach its maximum value. CCV counting is inhibited for second intervals where C-Bit Parity Severely Errored Seconds (CSES) are counted. It is also inhibited for second intervals where C-Bit Unavailable Seconds (CUAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  Counter32  

lpDS3CBitCbitErroredSec 1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.3
This attribute indicates the total number of C-Bit Parity Errored Seconds (CES). A CES second is declared for second intervals containing one or more CCVs or when one or more SEF (Severely Errored Frame) or AIS (Alarm Indication Signal) defects. CES counting is inhibited for second intervals where C-Bit Unavailable Seconds (CUAS) are counted.
OBJECT-TYPE    
  Counter32  

lpDS3CBitCbitSevErroredSec 1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.4
This attribute indicates the total number of C-Bit Parity Severely Errored Seconds (CSES). A CSES is declared for second intervals containing more than 44 CCVs or one or more SEF or AIS defects. The occurrence of CSES in a one second interval causes the inhibition of CCV counting during that second interval. CSES counting is also inhibited for second intervals where C-Bit Unavailable Seconds (CUAS) are counted.
OBJECT-TYPE    
  Counter32  

lpDS3CBitCbitUnavailSec 1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.5
This attribute indicates the total number of one second intervals for which the DS3 path is unavailable. The DS3 path becomes unavailable at the onset of 10 consecutive C-Bit Severely Errored Seconds (CSES). The 10 CSESs are included in the unavailable time. Once unavailable, the DS3 path becomes available at the onset of 10 contiguous seconds with no CSES. The 10 seconds with no CSES are excluded from the unavailable time. For second intervals where CUAS is counted, counting of C-Bit Coding Violations (CCV), C-Bit Errored Seconds (CES) and C-Bit Severely Errored Seconds (CSES) is inhibited.
OBJECT-TYPE    
  Counter32  

lpDS3CBitFarEndErrorFreeSec 1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.6
This attribute indicates the number of seconds that the DS3 port has not suffered of any far-end errors.
OBJECT-TYPE    
  Counter32  

lpDS3CBitFarEndCodeViolations 1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.7
This attribute indicates the total count of DS3 frames containing a Coding Violation on the Far-End (FECV), also known as a Far-End Block Error (FEBE). Each FEBE is reported over the FEBE bits each time the far-end DS3 terminal detects a C-BIT Parity error over a received DS3 frame. For second intervals where Far-End Unavailable Seconds (FEAUS) or Far-End Severely Errored Seconds (FESES) are counted, counting of FECVs is inhibited. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  Counter32  

lpDS3CBitFarEndErroredSec 1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.8
This attribute indicates the total number of Far-End Errored Seconds (FEES). A FEES is declared for second intervals containing with one or more FECVs or one or more far-end SEF/ AIS defects. A far-end SEF/AIS defect occurs when the X-Bits of the DS3 frame are received as being set to zero. For second intervals where Far-End Unavailable Seconds (FEUAS) are counted, counting of FEESs is inhibited.
OBJECT-TYPE    
  Counter32  

lpDS3CBitFarEndSevErroredSec 1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.9
This attribute indicates the total number of Far-End Severely Errored Seconds (FESES). A FESES is declared for second intervals containing more than 44 FECVs or one or more far-end SEF/AIS defects. For second intervals where a FESES is counted, counting of FECVs is inhibited. For second intervals where Far-End Unavailable Seconds (FEUAS) are counted, counting of FESESs is inhibited.
OBJECT-TYPE    
  Counter32  

lpDS3CBitFarEndSefAisSec 1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.10
This attribute indicates the total number of Far-End SEF/AIS Seconds (FESAS). A FESAS is declared for second intervals containing one or more far-end SEF/AIS defects.For second intervals where Far-End Unavailable Seconds (FEUAS) are counted, counting of FESASs is inhibited.
OBJECT-TYPE    
  Counter32  

lpDS3CBitFarEndUnavailSec 1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.11
This attribute indicates the total number of one second intervals for which the DS3 far-end path is unavailable. The DS3 far-end path becomes unavailable at the onset of 10 consecutive Far-End Severely Errored Seconds (FESES). The 10 FESESs are included in the unavailable time. Once unavailable, the DS3 far-end path becomes available at the onset of 10 contiguous seconds with no FESES. The 10 seconds with no FESES are excluded from the unavailable time. For second intervals where FEUAS is counted, counting of Far-End Coding Violations (FECV), Far-End Errored Seconds (FEES), Far-End Severely Errored Seconds (FESES) and Far-End Sef/Ais Seconds (FESAS) is inhibited.
OBJECT-TYPE    
  Counter32  

lpDS3CBitFarEndFailures 1.3.6.1.4.1.562.2.4.1.12.5.3.11.1.12
This attribute indicates the total number of times that a far-end path failure (i.e. a Far-End SEF/AIS defect) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  Counter32  

lpDS3Plcp 1.3.6.1.4.1.562.2.4.1.12.5.4
OBJECT IDENTIFIER    

lpDS3PlcpRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.5.4.1
This entry controls the addition and deletion of lpDS3Plcp components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3PlcpRowStatusEntry

lpDS3PlcpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.5.4.1.1
A single entry in the table represents a single lpDS3Plcp component.
OBJECT-TYPE    
  LpDS3PlcpRowStatusEntry  

lpDS3PlcpRowStatus 1.3.6.1.4.1.562.2.4.1.12.5.4.1.1.1
This variable is used as the basis for SNMP naming of lpDS3Plcp components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpDS3PlcpComponentName 1.3.6.1.4.1.562.2.4.1.12.5.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpDS3PlcpStorageType 1.3.6.1.4.1.562.2.4.1.12.5.4.1.1.4
This variable represents the storage type value for the lpDS3Plcp tables.
OBJECT-TYPE    
  StorageType  

lpDS3PlcpIndex 1.3.6.1.4.1.562.2.4.1.12.5.4.1.1.10
This variable represents the index for the lpDS3Plcp tables.
OBJECT-TYPE    
  NonReplicated  

lpDS3PlcpOperationalTable 1.3.6.1.4.1.562.2.4.1.12.5.4.10
This group contains the operational data for the PLCP component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3PlcpOperationalEntry

lpDS3PlcpOperationalEntry 1.3.6.1.4.1.562.2.4.1.12.5.4.10.1
An entry in the lpDS3PlcpOperationalTable.
OBJECT-TYPE    
  LpDS3PlcpOperationalEntry  

lpDS3PlcpLofAlarm 1.3.6.1.4.1.562.2.4.1.12.5.4.10.1.1
This attribute displays whether a PLCP Loss Of Frame (LOF) failure alarm state has been entered. An LOF failure is declared when a PLCP LOF defect persists for 2.5 s +/- 0.5 s. An LOF defect occurs when an OOF (Out of Frame) state persists for more than 1 ms. If the OOF events are intermittent, the LOF defect counter is decremented at a rate of 1/12 (for DS3 PLCP) or 1/9 (for G.751 E3 PLCP) of the incrementing rate, with all measurements based on a 200 ms polling cycle. An OOF event (also known as a PLCP SEF event) is declared when an error is detected in both the A1 and A2 octets, or when two consecutive POHIDs are found in error. OOF is removed when two valid sets of framing octets and two valid and sequential POHID octets have been found. The LOF defect is removed when the defect counter reaches zero, i.e. when OOF events are absent for more than 12 ms (DS3 PLCP) or 9 ms (G.751 E3 PLCP). LOF failure alarm is cleared when LOF defect is absent for 10.0 s +/- 0.5 s The DS3 or E3 component goes into an operational state of disabled until the LOF failure alarm is cleared. The terminal declaring the LOF failure alarm will transmit a PLCP RAI signal to the far-end for the duration of the alarm. The lofAlarm attribute is always set to off when the DS3 or E3 component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpDS3PlcpRxRaiAlarm 1.3.6.1.4.1.562.2.4.1.12.5.4.10.1.2
This attribute displays whether a PLCP Remote Alarm Indication (RAI) failure alarm state has been entered. An RAI failure alarm occurs when ten consecutive PLCP RAI bits (bit 5 in the G1 byte) are high on the incoming line. An RAI failure alarm is cleared when ten consecutive RAI bits are set to 0. Note: Some standards call this alarm RFI. The rxRaiAlarm attribute is always set to off when the DS3 or E3 component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpDS3PlcpStatsTable 1.3.6.1.4.1.562.2.4.1.12.5.4.11
This group contains the statistical data for the PLCP component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3PlcpStatsEntry

lpDS3PlcpStatsEntry 1.3.6.1.4.1.562.2.4.1.12.5.4.11.1
An entry in the lpDS3PlcpStatsTable.
OBJECT-TYPE    
  LpDS3PlcpStatsEntry  

lpDS3PlcpErrorFreeSec 1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.1
This attribute indicates the number of seconds during which the near-end PLCP path layer had no errors.
OBJECT-TYPE    
  Counter32  

lpDS3PlcpCodingViolations 1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.2
This attribute indicates the total number of BIP-8 Errors, framing pattern octet errors, and path overhead identification errors detected in received PLCP frames. Counting of PLCP CV is inhibited for second intervals where PLCP Severely Errored Framing Seconds (SEFS) or PLCP Unavailable Seconds (UAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  Counter32  

lpDS3PlcpErroredSec 1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.3
This attribute indicates the number of seconds containing one or more PLCP Coding Violations (CV) or in which a PLCP Severely Errored Framing Second (SEFS) was counted. Counting of PLCP ES is inhibited during second intervals where PLCP Unavailable Seconds (UAS) are counted.
OBJECT-TYPE    
  Counter32  

lpDS3PlcpSevErroredSec 1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.4
This attribute indicates the number of seconds containing 5 or more PLCPCVs or in which a PLCPSEFS was counted (i.e. a PLCP OOF event occurred). Counting of PLCP SES is inhibited during second intervals where PLCP Unavailable Seconds (UAS) are counted.
OBJECT-TYPE    
  Counter32  

lpDS3PlcpSevErroredFramingSec 1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.5
This attribute indicates the number of seconds containing one or more PLCP Severely Errored Frame (SEF) events. An SEF event is equivalent to a PLCP OOF (Out of Frame) event. Counting of PLCPP SEFSs is inhibited for second intervals where PLCP Unavailable Seconds (UAS) are counted.
OBJECT-TYPE    
  Counter32  

lpDS3PlcpUnavailSec 1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.6
This attribute indicates the number of seconds when the near-end PLCP layer is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP LOF (Loss of Frame) failure alarm state. The PLCP Path Layer becomes available again only after clearing this condition. For second intervals where PLCP UAS are counted, counting of PLCP Severely Errored Framing Seconds (SEFS), PLCP Coding Violations (CV), PLCP Errored Seconds (ES), PLCP Severely Errored Seconds (SES) and PLCP Far-End Severely Errored Seconds (FESES) is inhibited.
OBJECT-TYPE    
  Counter32  

lpDS3PlcpFarEndErrorFreeSec 1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.7
This attribute indicates the number of seconds during which the far- end PLCP path layer had no errors.
OBJECT-TYPE    
  Counter32  

lpDS3PlcpFarEndCodingViolations 1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.8
This attribute indicates the total number of PLCP Far-End Block Errors (FEBE) reported by the far-end terminal. Counting of FEBEs is inhibited for second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  Counter32  

lpDS3PlcpFarEndErroredSec 1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.9
This attribute indicates the number of seconds containing one or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FEES is inhibited during second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted.
OBJECT-TYPE    
  Counter32  

lpDS3PlcpFarEndSevErroredSec 1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.10
This attribute indicates the number of seconds containing 5 or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FESES is inhibited for second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted.
OBJECT-TYPE    
  Counter32  

lpDS3PlcpFarEndUnavailableSec 1.3.6.1.4.1.562.2.4.1.12.5.4.11.1.11
This attribute indicates the number of seconds during which the PLCP far end is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP RAI (Remote Alarm Indication). Service becomes available again after this condition is cleared. For second intervals where PLCP FEUAS are counted, counting of PLCP Far-End Coding Violations (FECV), PLCP Far- End Errored Seconds (FEES), and PLCP Far-End Severely Errored Seconds (FESES) is inhibited.
OBJECT-TYPE    
  Counter32  

lpDS3Cell 1.3.6.1.4.1.562.2.4.1.12.5.5
OBJECT IDENTIFIER    

lpDS3CellRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.5.5.1
This entry controls the addition and deletion of lpDS3Cell components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3CellRowStatusEntry

lpDS3CellRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.5.5.1.1
A single entry in the table represents a single lpDS3Cell component.
OBJECT-TYPE    
  LpDS3CellRowStatusEntry  

lpDS3CellRowStatus 1.3.6.1.4.1.562.2.4.1.12.5.5.1.1.1
This variable is used as the basis for SNMP naming of lpDS3Cell components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

lpDS3CellComponentName 1.3.6.1.4.1.562.2.4.1.12.5.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpDS3CellStorageType 1.3.6.1.4.1.562.2.4.1.12.5.5.1.1.4
This variable represents the storage type value for the lpDS3Cell tables.
OBJECT-TYPE    
  StorageType  

lpDS3CellIndex 1.3.6.1.4.1.562.2.4.1.12.5.5.1.1.10
This variable represents the index for the lpDS3Cell tables.
OBJECT-TYPE    
  NonReplicated  

lpDS3CellProvTable 1.3.6.1.4.1.562.2.4.1.12.5.5.10
This group contains the provisioning attributes for the AtmCell component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3CellProvEntry

lpDS3CellProvEntry 1.3.6.1.4.1.562.2.4.1.12.5.5.10.1
An entry in the lpDS3CellProvTable.
OBJECT-TYPE    
  LpDS3CellProvEntry  

lpDS3CellAlarmActDelay 1.3.6.1.4.1.562.2.4.1.12.5.5.10.1.1
This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
OBJECT-TYPE    
  Unsigned32 0..2000  

lpDS3CellScrambleCellPayload 1.3.6.1.4.1.562.2.4.1.12.5.5.10.1.2
Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

lpDS3CellCorrectSingleBitHeaderErrors 1.3.6.1.4.1.562.2.4.1.12.5.5.10.1.3
This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

lpDS3CellOperTable 1.3.6.1.4.1.562.2.4.1.12.5.5.11
This group contains the common operational attributes for the AtmCell component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3CellOperEntry

lpDS3CellOperEntry 1.3.6.1.4.1.562.2.4.1.12.5.5.11.1
An entry in the lpDS3CellOperTable.
OBJECT-TYPE    
  LpDS3CellOperEntry  

lpDS3CellLcdAlarm 1.3.6.1.4.1.562.2.4.1.12.5.5.11.1.1
This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpDS3CellStatsTable 1.3.6.1.4.1.562.2.4.1.12.5.5.12
This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3CellStatsEntry

lpDS3CellStatsEntry 1.3.6.1.4.1.562.2.4.1.12.5.5.12.1
An entry in the lpDS3CellStatsTable.
OBJECT-TYPE    
  LpDS3CellStatsEntry  

lpDS3CellUncorrectableHecErrors 1.3.6.1.4.1.562.2.4.1.12.5.5.12.1.1
This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
OBJECT-TYPE    
  Counter32  

lpDS3CellSevErroredSec 1.3.6.1.4.1.562.2.4.1.12.5.5.12.1.2
This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
OBJECT-TYPE    
  Counter32  

lpDS3CellReceiveCellUtilization 1.3.6.1.4.1.562.2.4.1.12.5.5.12.1.3
This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  Gauge32 0..100  

lpDS3CellTransmitCellUtilization 1.3.6.1.4.1.562.2.4.1.12.5.5.12.1.4
This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  Gauge32 0..100  

lpDS3CellCorrectableHeaderErrors 1.3.6.1.4.1.562.2.4.1.12.5.5.12.1.5
This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
OBJECT-TYPE    
  Counter32  

lpDS3DS1 1.3.6.1.4.1.562.2.4.1.12.5.6
OBJECT IDENTIFIER    

lpDS3DS1RowStatusTable 1.3.6.1.4.1.562.2.4.1.12.5.6.1
This entry controls the addition and deletion of lpDS3DS1 components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1RowStatusEntry

lpDS3DS1RowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.1.1
A single entry in the table represents a single lpDS3DS1 component.
OBJECT-TYPE    
  LpDS3DS1RowStatusEntry  

lpDS3DS1RowStatus 1.3.6.1.4.1.562.2.4.1.12.5.6.1.1.1
This variable is used as the basis for SNMP naming of lpDS3DS1 components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

lpDS3DS1ComponentName 1.3.6.1.4.1.562.2.4.1.12.5.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpDS3DS1StorageType 1.3.6.1.4.1.562.2.4.1.12.5.6.1.1.4
This variable represents the storage type value for the lpDS3DS1 tables.
OBJECT-TYPE    
  StorageType  

lpDS3DS1Index 1.3.6.1.4.1.562.2.4.1.12.5.6.1.1.10
This variable represents the index for the lpDS3DS1 tables.
OBJECT-TYPE    
  Integer32 1..28  

lpDS3DS1Chan 1.3.6.1.4.1.562.2.4.1.12.5.6.2
OBJECT IDENTIFIER    

lpDS3DS1ChanRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.5.6.2.1
This entry controls the addition and deletion of lpDS3DS1Chan components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1ChanRowStatusEntry

lpDS3DS1ChanRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.2.1.1
A single entry in the table represents a single lpDS3DS1Chan component.
OBJECT-TYPE    
  LpDS3DS1ChanRowStatusEntry  

lpDS3DS1ChanRowStatus 1.3.6.1.4.1.562.2.4.1.12.5.6.2.1.1.1
This variable is used as the basis for SNMP naming of lpDS3DS1Chan components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

lpDS3DS1ChanComponentName 1.3.6.1.4.1.562.2.4.1.12.5.6.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpDS3DS1ChanStorageType 1.3.6.1.4.1.562.2.4.1.12.5.6.2.1.1.4
This variable represents the storage type value for the lpDS3DS1Chan tables.
OBJECT-TYPE    
  StorageType  

lpDS3DS1ChanIndex 1.3.6.1.4.1.562.2.4.1.12.5.6.2.1.1.10
This variable represents the index for the lpDS3DS1Chan tables.
OBJECT-TYPE    
  Integer32 0  

lpDS3DS1ChanTest 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2
OBJECT IDENTIFIER    

lpDS3DS1ChanTestRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.1
This entry controls the addition and deletion of lpDS3DS1ChanTest components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1ChanTestRowStatusEntry

lpDS3DS1ChanTestRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.1.1
A single entry in the table represents a single lpDS3DS1ChanTest component.
OBJECT-TYPE    
  LpDS3DS1ChanTestRowStatusEntry  

lpDS3DS1ChanTestRowStatus 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.1.1.1
This variable is used as the basis for SNMP naming of lpDS3DS1ChanTest components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpDS3DS1ChanTestComponentName 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpDS3DS1ChanTestStorageType 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.1.1.4
This variable represents the storage type value for the lpDS3DS1ChanTest tables.
OBJECT-TYPE    
  StorageType  

lpDS3DS1ChanTestIndex 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.1.1.10
This variable represents the index for the lpDS3DS1ChanTest tables.
OBJECT-TYPE    
  NonReplicated  

lpDS3DS1ChanTestStateTable 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1ChanTestStateEntry

lpDS3DS1ChanTestStateEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.10.1
An entry in the lpDS3DS1ChanTestStateTable.
OBJECT-TYPE    
  LpDS3DS1ChanTestStateEntry  

lpDS3DS1ChanTestAdminState 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpDS3DS1ChanTestOperationalState 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpDS3DS1ChanTestUsageState 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpDS3DS1ChanTestSetupTable 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11
This group contains all of the operational data for a Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1ChanTestSetupEntry

lpDS3DS1ChanTestSetupEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1
An entry in the lpDS3DS1ChanTestSetupTable.
OBJECT-TYPE    
  LpDS3DS1ChanTestSetupEntry  

lpDS3DS1ChanTestPurpose 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.1
This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
OBJECT-TYPE    
  AsciiString SIZE(0..40)  

lpDS3DS1ChanTestType 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.2
This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
OBJECT-TYPE    
  INTEGER card(0), manual(1), localLoop(2), remoteLoop(3), externalLoop(4), payloadLoop(5), remoteLoopThisTrib(6), v54RemoteLoop(7), pn127RemoteLoop(8)  

lpDS3DS1ChanTestFrmSize 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.3
This attribute defines the size of the test data frames in number of bytes.
OBJECT-TYPE    
  Unsigned32 4..4096  

lpDS3DS1ChanTestFrmPatternType 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.4
This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
OBJECT-TYPE    
  INTEGER ccitt32kBitPattern(0), ccitt8MBitPattern(1), customizedPattern(2)  

lpDS3DS1ChanTestCustomizedPattern 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.5
This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
OBJECT-TYPE    
  Hex 0..4294967295  

lpDS3DS1ChanTestDataStartDelay 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.6
This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
OBJECT-TYPE    
  Unsigned32 0..1814400  

lpDS3DS1ChanTestDisplayInterval 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.7
This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
OBJECT-TYPE    
  Unsigned32 0..30240  

lpDS3DS1ChanTestDuration 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.11.1.8
This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
OBJECT-TYPE    
  Unsigned32 1..30240  

lpDS3DS1ChanTestResultsTable 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12
This group contains all the statistics related attributes of the Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1ChanTestResultsEntry

lpDS3DS1ChanTestResultsEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1
An entry in the lpDS3DS1ChanTestResultsTable.
OBJECT-TYPE    
  LpDS3DS1ChanTestResultsEntry  

lpDS3DS1ChanTestElapsedTime 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.1
This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
OBJECT-TYPE    
  Counter32  

lpDS3DS1ChanTestTimeRemaining 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.2
This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

lpDS3DS1ChanTestCauseOfTermination 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.3
This attribute records the reason the test is terminated.
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4), hardwareReconfigured(5)  

lpDS3DS1ChanTestBitsTx 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.4
This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpDS3DS1ChanTestBytesTx 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.5
This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpDS3DS1ChanTestFrmTx 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.6
This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpDS3DS1ChanTestBitsRx 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.7
This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpDS3DS1ChanTestBytesRx 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.8
This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpDS3DS1ChanTestFrmRx 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.9
This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpDS3DS1ChanTestErroredFrmRx 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.10
This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
OBJECT-TYPE    
  PassportCounter64  

lpDS3DS1ChanTestBitErrorRate 1.3.6.1.4.1.562.2.4.1.12.5.6.2.2.12.1.11
This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
OBJECT-TYPE    
  AsciiString SIZE(5)  

lpDS3DS1ChanCell 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3
OBJECT IDENTIFIER    

lpDS3DS1ChanCellRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.1
This entry controls the addition and deletion of lpDS3DS1ChanCell components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1ChanCellRowStatusEntry

lpDS3DS1ChanCellRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.1.1
A single entry in the table represents a single lpDS3DS1ChanCell component.
OBJECT-TYPE    
  LpDS3DS1ChanCellRowStatusEntry  

lpDS3DS1ChanCellRowStatus 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.1.1.1
This variable is used as the basis for SNMP naming of lpDS3DS1ChanCell components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

lpDS3DS1ChanCellComponentName 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpDS3DS1ChanCellStorageType 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.1.1.4
This variable represents the storage type value for the lpDS3DS1ChanCell tables.
OBJECT-TYPE    
  StorageType  

lpDS3DS1ChanCellIndex 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.1.1.10
This variable represents the index for the lpDS3DS1ChanCell tables.
OBJECT-TYPE    
  NonReplicated  

lpDS3DS1ChanCellProvTable 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.10
This group contains the provisioning attributes for the AtmCell component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1ChanCellProvEntry

lpDS3DS1ChanCellProvEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.10.1
An entry in the lpDS3DS1ChanCellProvTable.
OBJECT-TYPE    
  LpDS3DS1ChanCellProvEntry  

lpDS3DS1ChanCellAlarmActDelay 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.10.1.1
This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
OBJECT-TYPE    
  Unsigned32 0..2000  

lpDS3DS1ChanCellScrambleCellPayload 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.10.1.2
Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

lpDS3DS1ChanCellCorrectSingleBitHeaderErrors 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.10.1.3
This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

lpDS3DS1ChanCellOperTable 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.11
This group contains the common operational attributes for the AtmCell component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1ChanCellOperEntry

lpDS3DS1ChanCellOperEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.11.1
An entry in the lpDS3DS1ChanCellOperTable.
OBJECT-TYPE    
  LpDS3DS1ChanCellOperEntry  

lpDS3DS1ChanCellLcdAlarm 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.11.1.1
This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpDS3DS1ChanCellStatsTable 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12
This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1ChanCellStatsEntry

lpDS3DS1ChanCellStatsEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12.1
An entry in the lpDS3DS1ChanCellStatsTable.
OBJECT-TYPE    
  LpDS3DS1ChanCellStatsEntry  

lpDS3DS1ChanCellUncorrectableHecErrors 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12.1.1
This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
OBJECT-TYPE    
  Counter32  

lpDS3DS1ChanCellSevErroredSec 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12.1.2
This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
OBJECT-TYPE    
  Counter32  

lpDS3DS1ChanCellReceiveCellUtilization 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12.1.3
This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  Gauge32 0..100  

lpDS3DS1ChanCellTransmitCellUtilization 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12.1.4
This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  Gauge32 0..100  

lpDS3DS1ChanCellCorrectableHeaderErrors 1.3.6.1.4.1.562.2.4.1.12.5.6.2.3.12.1.5
This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
OBJECT-TYPE    
  Counter32  

lpDS3DS1ChanTc 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4
OBJECT IDENTIFIER    

lpDS3DS1ChanTcRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.1
This entry controls the addition and deletion of lpDS3DS1ChanTc components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1ChanTcRowStatusEntry

lpDS3DS1ChanTcRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.1.1
A single entry in the table represents a single lpDS3DS1ChanTc component.
OBJECT-TYPE    
  LpDS3DS1ChanTcRowStatusEntry  

lpDS3DS1ChanTcRowStatus 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.1.1.1
This variable is used as the basis for SNMP naming of lpDS3DS1ChanTc components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

lpDS3DS1ChanTcComponentName 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpDS3DS1ChanTcStorageType 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.1.1.4
This variable represents the storage type value for the lpDS3DS1ChanTc tables.
OBJECT-TYPE    
  StorageType  

lpDS3DS1ChanTcIndex 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.1.1.10
This variable represents the index for the lpDS3DS1ChanTc tables.
OBJECT-TYPE    
  NonReplicated  

lpDS3DS1ChanTcProvTable 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.10
This group contains all specific provisioning data for a Tc component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1ChanTcProvEntry

lpDS3DS1ChanTcProvEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.10.1
An entry in the lpDS3DS1ChanTcProvTable.
OBJECT-TYPE    
  LpDS3DS1ChanTcProvEntry  

lpDS3DS1ChanTcReplacementData 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.10.1.1
This attribute specifies the trunk conditioning data byte to be substituted into the timeslots defined by the Chan component under fault conditions. replacementData can be set to any two digit hexadecimal number. The following are recommended values: DS1 MUX Out Of Service Code = 0x1A E1 MUX Out Of Service Code = 0xFF
OBJECT-TYPE    
  Hex 0..255  

lpDS3DS1ChanTcSignalOneDuration 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.10.1.2
This attribute specifies the time duration in seconds for which signalOne is substituted into the appropriate signaling bits, when a lineType that uses CAS has been defined. When signalOneDuration has expired signalTwo is substituted into the appropriate signaling bits. If signalOneDuration is set to zero then only signalTwo is substituted into the appropriate signaling bits during error conditions. signalOneDuration can be set to any integer value from 0 to 60 seconds.
OBJECT-TYPE    
  Unsigned32 0..60  

lpDS3DS1ChanTcOpTable 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.11
This group contains all specific operational data for a Tc component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1ChanTcOpEntry

lpDS3DS1ChanTcOpEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.11.1
An entry in the lpDS3DS1ChanTcOpTable.
OBJECT-TYPE    
  LpDS3DS1ChanTcOpEntry  

lpDS3DS1ChanTcIngressConditioning 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.11.1.1
This attribute indicates the status of locally generated trunk conditioning towards the ATM network. When trunk conditioning is being locally generated towards the ATM network, ingressConditioning is set to on. When trunk conditioning is not being locally generated towards the ATM network, ingressConditioning is set to off. Trunk conditioning is transmitted towards the ATM network under the following conditions: lossOfSignal (LOS) lossOfFrame (LOF) remoteAlarmIndication (RAI) alarmIndicationSignal (AIS) bufferUnderflow (BU) and in addition for E1: lossOfMultiframe (LOMF) receiveMultiframeRemoteAlarmIndication (RMRAI)
OBJECT-TYPE    
  INTEGER off(0), on(1)  

lpDS3DS1ChanTcEgressConditioning 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.11.1.2
This attribute indicates the status of locally generated trunk conditioning towards the PDH line. When trunk conditioning is being locally generated towards the PDH line, egressConditioning is set to on. When trunk conditioning is not being locally generated towards the PDH line, egressConditioning is set to off. Trunk conditioning is transmitted towards the PDH line under the following conditions: bufferUnderflow (BU) AAL1 protocol errors.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

lpDS3DS1ChanTcSigOneTable 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.398
This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted for the duration provisioned in signalOneDuration when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1ChanTcSigOneEntry

lpDS3DS1ChanTcSigOneEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.398.1
An entry in the lpDS3DS1ChanTcSigOneTable.
OBJECT-TYPE    
  LpDS3DS1ChanTcSigOneEntry  

lpDS3DS1ChanTcSigOneIndex 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.398.1.1
This variable represents the lpDS3DS1ChanTcSigOneTable specific index for the lpDS3DS1ChanTcSigOneTable.
OBJECT-TYPE    
  INTEGER d(0), c(1), b(2), a(3)  

lpDS3DS1ChanTcSigOneValue 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.398.1.2
This variable represents an individual value for the lpDS3DS1ChanTcSigOneTable.
OBJECT-TYPE    
  Unsigned32 0..1  

lpDS3DS1ChanTcSigTwoTable 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.399
This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted after the duration provisioned in signalOneDuration has expired and when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1ChanTcSigTwoEntry

lpDS3DS1ChanTcSigTwoEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.399.1
An entry in the lpDS3DS1ChanTcSigTwoTable.
OBJECT-TYPE    
  LpDS3DS1ChanTcSigTwoEntry  

lpDS3DS1ChanTcSigTwoIndex 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.399.1.1
This variable represents the lpDS3DS1ChanTcSigTwoTable specific index for the lpDS3DS1ChanTcSigTwoTable.
OBJECT-TYPE    
  INTEGER d(0), c(1), b(2), a(3)  

lpDS3DS1ChanTcSigTwoValue 1.3.6.1.4.1.562.2.4.1.12.5.6.2.4.399.1.2
This variable represents an individual value for the lpDS3DS1ChanTcSigTwoTable.
OBJECT-TYPE    
  Unsigned32 0..1  

lpDS3DS1ChanProvTable 1.3.6.1.4.1.562.2.4.1.12.5.6.2.10
This group contains all of the provisional data for a Channel component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1ChanProvEntry

lpDS3DS1ChanProvEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.2.10.1
An entry in the lpDS3DS1ChanProvTable.
OBJECT-TYPE    
  LpDS3DS1ChanProvEntry  

lpDS3DS1ChanTimeslots 1.3.6.1.4.1.562.2.4.1.12.5.6.2.10.1.1
This attribute contains the list of timeslots that are used by the Channel component. Valid numbers are 1-24 for a Channel used by a DS1 component, and 1-31 for a Channel used by an E1 component. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) n29(29) n30(30) n31(31)
OBJECT-TYPE    
  OCTET STRING SIZE(4)  

lpDS3DS1ChanTimeslotDataRate 1.3.6.1.4.1.562.2.4.1.12.5.6.2.10.1.2
This attribute selects the data rate of the timeslots in a channel of a DS1 component. For E1, the data rate of the timeslots will always be 64kbit/s regardless of this attribute. When doNotOverride is selected for a channel on a DS1, the data rate of the channel's timeslots are dependent on the zeroCoding selection of the DS1 component. If the zeroCoding is B8ZS (where supported on the FP) or none, the timeslot's data rate will be 64kbit/s. If the zeroCoding option is bit7Stuffing, the data rate of a timeslot will be 56kbit/s. When 56kbit/s is selected for a channel on a DS1, the least significant bit of each timeslot of this Channel will always be set to 1 and not used for data. The data rate for the timeslots of this channel is therefore restricted to 56kbit/s. One application of this attribute is to allow a DS1 line to support mixing channels that originate from lines that use different zeroCoding schemes.
OBJECT-TYPE    
  INTEGER n56k(0), doNotOverride(1)  

lpDS3DS1ChanApplicationFramerName 1.3.6.1.4.1.562.2.4.1.12.5.6.2.10.1.3
This attribute defines the link to the software stack. It defines which application is running on top of this hardware component.
OBJECT-TYPE    
  Link  

lpDS3DS1ChanCidDataTable 1.3.6.1.4.1.562.2.4.1.12.5.6.2.11
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1ChanCidDataEntry

lpDS3DS1ChanCidDataEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.2.11.1
An entry in the lpDS3DS1ChanCidDataTable.
OBJECT-TYPE    
  LpDS3DS1ChanCidDataEntry  

lpDS3DS1ChanCustomerIdentifier 1.3.6.1.4.1.562.2.4.1.12.5.6.2.11.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

lpDS3DS1ChanIfEntryTable 1.3.6.1.4.1.562.2.4.1.12.5.6.2.12
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1ChanIfEntryEntry

lpDS3DS1ChanIfEntryEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.2.12.1
An entry in the lpDS3DS1ChanIfEntryTable.
OBJECT-TYPE    
  LpDS3DS1ChanIfEntryEntry  

lpDS3DS1ChanIfAdminStatus 1.3.6.1.4.1.562.2.4.1.12.5.6.2.12.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpDS3DS1ChanIfIndex 1.3.6.1.4.1.562.2.4.1.12.5.6.2.12.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

lpDS3DS1ChanOperStatusTable 1.3.6.1.4.1.562.2.4.1.12.5.6.2.13
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1ChanOperStatusEntry

lpDS3DS1ChanOperStatusEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.2.13.1
An entry in the lpDS3DS1ChanOperStatusTable.
OBJECT-TYPE    
  LpDS3DS1ChanOperStatusEntry  

lpDS3DS1ChanSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.12.5.6.2.13.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpDS3DS1ChanStateTable 1.3.6.1.4.1.562.2.4.1.12.5.6.2.14
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1ChanStateEntry

lpDS3DS1ChanStateEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1
An entry in the lpDS3DS1ChanStateTable.
OBJECT-TYPE    
  LpDS3DS1ChanStateEntry  

lpDS3DS1ChanAdminState 1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpDS3DS1ChanOperationalState 1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpDS3DS1ChanUsageState 1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpDS3DS1ChanAvailabilityStatus 1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

lpDS3DS1ChanProceduralStatus 1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpDS3DS1ChanControlStatus 1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpDS3DS1ChanAlarmStatus 1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpDS3DS1ChanStandbyStatus 1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

lpDS3DS1ChanUnknownStatus 1.3.6.1.4.1.562.2.4.1.12.5.6.2.14.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

lpDS3DS1ChanOperTable 1.3.6.1.4.1.562.2.4.1.12.5.6.2.15
This group contains all of the operational data for a Channel component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1ChanOperEntry

lpDS3DS1ChanOperEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.2.15.1
An entry in the lpDS3DS1ChanOperTable.
OBJECT-TYPE    
  LpDS3DS1ChanOperEntry  

lpDS3DS1ChanActualChannelSpeed 1.3.6.1.4.1.562.2.4.1.12.5.6.2.15.1.1
This attribute displays the measured link speed of the Channel component.
OBJECT-TYPE    
  Gauge32 0..4294967295  

lpDS3DS1ChanAdminInfoTable 1.3.6.1.4.1.562.2.4.1.12.5.6.2.16
This group contains the attributes pertaining to the vendor of the equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1ChanAdminInfoEntry

lpDS3DS1ChanAdminInfoEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.2.16.1
An entry in the lpDS3DS1ChanAdminInfoTable.
OBJECT-TYPE    
  LpDS3DS1ChanAdminInfoEntry  

lpDS3DS1ChanVendor 1.3.6.1.4.1.562.2.4.1.12.5.6.2.16.1.1
This is the name of the vendor supplying the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..20)  

lpDS3DS1ChanCommentText 1.3.6.1.4.1.562.2.4.1.12.5.6.2.16.1.2
Any miscellaneous text about the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..60)  

lpDS3DS1Test 1.3.6.1.4.1.562.2.4.1.12.5.6.3
OBJECT IDENTIFIER    

lpDS3DS1TestRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.5.6.3.1
This entry controls the addition and deletion of lpDS3DS1Test components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1TestRowStatusEntry

lpDS3DS1TestRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.3.1.1
A single entry in the table represents a single lpDS3DS1Test component.
OBJECT-TYPE    
  LpDS3DS1TestRowStatusEntry  

lpDS3DS1TestRowStatus 1.3.6.1.4.1.562.2.4.1.12.5.6.3.1.1.1
This variable is used as the basis for SNMP naming of lpDS3DS1Test components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpDS3DS1TestComponentName 1.3.6.1.4.1.562.2.4.1.12.5.6.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpDS3DS1TestStorageType 1.3.6.1.4.1.562.2.4.1.12.5.6.3.1.1.4
This variable represents the storage type value for the lpDS3DS1Test tables.
OBJECT-TYPE    
  StorageType  

lpDS3DS1TestIndex 1.3.6.1.4.1.562.2.4.1.12.5.6.3.1.1.10
This variable represents the index for the lpDS3DS1Test tables.
OBJECT-TYPE    
  NonReplicated  

lpDS3DS1TestStateTable 1.3.6.1.4.1.562.2.4.1.12.5.6.3.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1TestStateEntry

lpDS3DS1TestStateEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.3.10.1
An entry in the lpDS3DS1TestStateTable.
OBJECT-TYPE    
  LpDS3DS1TestStateEntry  

lpDS3DS1TestAdminState 1.3.6.1.4.1.562.2.4.1.12.5.6.3.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpDS3DS1TestOperationalState 1.3.6.1.4.1.562.2.4.1.12.5.6.3.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpDS3DS1TestUsageState 1.3.6.1.4.1.562.2.4.1.12.5.6.3.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpDS3DS1TestSetupTable 1.3.6.1.4.1.562.2.4.1.12.5.6.3.11
This group contains all of the operational data for a Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1TestSetupEntry

lpDS3DS1TestSetupEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1
An entry in the lpDS3DS1TestSetupTable.
OBJECT-TYPE    
  LpDS3DS1TestSetupEntry  

lpDS3DS1TestPurpose 1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.1
This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
OBJECT-TYPE    
  AsciiString SIZE(0..40)  

lpDS3DS1TestType 1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.2
This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
OBJECT-TYPE    
  INTEGER card(0), manual(1), localLoop(2), remoteLoop(3), externalLoop(4), payloadLoop(5), remoteLoopThisTrib(6), v54RemoteLoop(7), pn127RemoteLoop(8)  

lpDS3DS1TestFrmSize 1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.3
This attribute defines the size of the test data frames in number of bytes.
OBJECT-TYPE    
  Unsigned32 4..4096  

lpDS3DS1TestFrmPatternType 1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.4
This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
OBJECT-TYPE    
  INTEGER ccitt32kBitPattern(0), ccitt8MBitPattern(1), customizedPattern(2)  

lpDS3DS1TestCustomizedPattern 1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.5
This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
OBJECT-TYPE    
  Hex 0..4294967295  

lpDS3DS1TestDataStartDelay 1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.6
This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
OBJECT-TYPE    
  Unsigned32 0..1814400  

lpDS3DS1TestDisplayInterval 1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.7
This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
OBJECT-TYPE    
  Unsigned32 0..30240  

lpDS3DS1TestDuration 1.3.6.1.4.1.562.2.4.1.12.5.6.3.11.1.8
This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
OBJECT-TYPE    
  Unsigned32 1..30240  

lpDS3DS1TestResultsTable 1.3.6.1.4.1.562.2.4.1.12.5.6.3.12
This group contains all the statistics related attributes of the Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1TestResultsEntry

lpDS3DS1TestResultsEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1
An entry in the lpDS3DS1TestResultsTable.
OBJECT-TYPE    
  LpDS3DS1TestResultsEntry  

lpDS3DS1TestElapsedTime 1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.1
This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
OBJECT-TYPE    
  Counter32  

lpDS3DS1TestTimeRemaining 1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.2
This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

lpDS3DS1TestCauseOfTermination 1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.3
This attribute records the reason the test is terminated.
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4), hardwareReconfigured(5)  

lpDS3DS1TestBitsTx 1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.4
This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpDS3DS1TestBytesTx 1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.5
This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpDS3DS1TestFrmTx 1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.6
This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpDS3DS1TestBitsRx 1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.7
This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpDS3DS1TestBytesRx 1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.8
This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpDS3DS1TestFrmRx 1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.9
This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpDS3DS1TestErroredFrmRx 1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.10
This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
OBJECT-TYPE    
  PassportCounter64  

lpDS3DS1TestBitErrorRate 1.3.6.1.4.1.562.2.4.1.12.5.6.3.12.1.11
This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
OBJECT-TYPE    
  AsciiString SIZE(5)  

lpDS3DS1ProvTable 1.3.6.1.4.1.562.2.4.1.12.5.6.10
This group contains all of the provisioning data for a DS1 component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1ProvEntry

lpDS3DS1ProvEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.10.1
An entry in the lpDS3DS1ProvTable.
OBJECT-TYPE    
  LpDS3DS1ProvEntry  

lpDS3DS1LineType 1.3.6.1.4.1.562.2.4.1.12.5.6.10.1.1
This attribute defines the framing of the DS1 tributary. d4 defines a framing pattern of 12 frames per multiframe. esf defines a framing pattern of 24 frames per multiframe. d4Cas defines a framing pattern of 12 frames per multiframe with channel associated signalling. esfCas defines a framing pattern of 24 frames per multiframe with channel associated signalling.
OBJECT-TYPE    
  INTEGER d4(0), esf(1), d4Cas(4), esfCas(5)  

lpDS3DS1ZeroCoding 1.3.6.1.4.1.562.2.4.1.12.5.6.10.1.2
This attribute defines the zero encoding on the DS1 tributary. bit7Stuffing sets bit 7 of every timeslot to a one to guarantee ones's density. This reduces the available bandwidth of the channel by 1/8. none does no zero encoding.
OBJECT-TYPE    
  INTEGER bit7Stuffing(0), none(3)  

lpDS3DS1ClockingSource 1.3.6.1.4.1.562.2.4.1.12.5.6.10.1.3
This attribute defines the source of the transmit clock for the DS1 tributary. When the clocking source is selected from local, the crystal on the port generates the clocking for the DS1 tributary. When the clocking source is selected from line, the port synchronizes to the clock from the DS1 tributary. When the clocking source is selected from module, the ports clock synchronizes to the clock provided by the oscillator on the active CP. On a 1pDS3C card, if the NetworkSynchronization (NS) component is present the default value of this attribute will be module otherwise it will be line. On a 2pDS3cAal card, the only valid values are local and module. If the NS component is present the default value of this attribute will be module otherwise it will be local.
OBJECT-TYPE    
  INTEGER local(0), line(1), module(2)  

lpDS3DS1CidDataTable 1.3.6.1.4.1.562.2.4.1.12.5.6.11
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1CidDataEntry

lpDS3DS1CidDataEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.11.1
An entry in the lpDS3DS1CidDataTable.
OBJECT-TYPE    
  LpDS3DS1CidDataEntry  

lpDS3DS1CustomerIdentifier 1.3.6.1.4.1.562.2.4.1.12.5.6.11.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

lpDS3DS1AdminInfoTable 1.3.6.1.4.1.562.2.4.1.12.5.6.12
This group contains the attributes pertaining to the vendor of the equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1AdminInfoEntry

lpDS3DS1AdminInfoEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.12.1
An entry in the lpDS3DS1AdminInfoTable.
OBJECT-TYPE    
  LpDS3DS1AdminInfoEntry  

lpDS3DS1Vendor 1.3.6.1.4.1.562.2.4.1.12.5.6.12.1.1
This is the name of the vendor supplying the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..20)  

lpDS3DS1CommentText 1.3.6.1.4.1.562.2.4.1.12.5.6.12.1.2
Any miscellaneous text about the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..60)  

lpDS3DS1IfEntryTable 1.3.6.1.4.1.562.2.4.1.12.5.6.13
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1IfEntryEntry

lpDS3DS1IfEntryEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.13.1
An entry in the lpDS3DS1IfEntryTable.
OBJECT-TYPE    
  LpDS3DS1IfEntryEntry  

lpDS3DS1IfAdminStatus 1.3.6.1.4.1.562.2.4.1.12.5.6.13.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpDS3DS1IfIndex 1.3.6.1.4.1.562.2.4.1.12.5.6.13.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

lpDS3DS1OperStatusTable 1.3.6.1.4.1.562.2.4.1.12.5.6.14
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1OperStatusEntry

lpDS3DS1OperStatusEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.14.1
An entry in the lpDS3DS1OperStatusTable.
OBJECT-TYPE    
  LpDS3DS1OperStatusEntry  

lpDS3DS1SnmpOperStatus 1.3.6.1.4.1.562.2.4.1.12.5.6.14.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpDS3DS1StateTable 1.3.6.1.4.1.562.2.4.1.12.5.6.15
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1StateEntry

lpDS3DS1StateEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.15.1
An entry in the lpDS3DS1StateTable.
OBJECT-TYPE    
  LpDS3DS1StateEntry  

lpDS3DS1AdminState 1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpDS3DS1OperationalState 1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpDS3DS1UsageState 1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpDS3DS1AvailabilityStatus 1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

lpDS3DS1ProceduralStatus 1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpDS3DS1ControlStatus 1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpDS3DS1AlarmStatus 1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpDS3DS1StandbyStatus 1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

lpDS3DS1UnknownStatus 1.3.6.1.4.1.562.2.4.1.12.5.6.15.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

lpDS3DS1OperTable 1.3.6.1.4.1.562.2.4.1.12.5.6.16
This group contains the common operational data for a component in a digital hierarchy interface.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1OperEntry

lpDS3DS1OperEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.16.1
An entry in the lpDS3DS1OperTable.
OBJECT-TYPE    
  LpDS3DS1OperEntry  

lpDS3DS1RxAisAlarm 1.3.6.1.4.1.562.2.4.1.12.5.6.16.1.1
This attribute indicates whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/- 0.5 seconds. An AIS defect is detected after having received less than 3 zeros in a 2048 bit period. If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. This tributary goes into an operationalState of disabled for the duration of an AIS alarm state. The AIS alarm state is cleared when AIS defects are absent for 10 seconds +/- 0.5 seconds.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpDS3DS1LofAlarm 1.3.6.1.4.1.562.2.4.1.12.5.6.16.1.2
This attribute indicates whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defects (2 out of 5 framing bits in error ) have been detected for 3 seconds +/- 0.5 seconds. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. This tributary goes into an operationalState of disabled until the LOF alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOF alarm state The condition is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpDS3DS1RxRaiAlarm 1.3.6.1.4.1.562.2.4.1.12.5.6.16.1.3
This attribute indicates whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered when the RAI defect indicator has been observed and accumulated for 3.5 seconds +/- 0.5 seconds. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/ 10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The RAI alarm state is cleared when the RAI defect indicator has been absent for 10 seconds +/- 0.5 seconds. The RAI alarm is usually an indication that the far end facility is unable to gain synchronization.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpDS3DS1TxAisAlarm 1.3.6.1.4.1.562.2.4.1.12.5.6.16.1.4
This attribute indicates whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transmitted when the tributary is in a locked state.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpDS3DS1TxRaiAlarm 1.3.6.1.4.1.562.2.4.1.12.5.6.16.1.5
This attribute indicates whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the tributary detects a LOF alarm condition.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpDS3DS1StatsTable 1.3.6.1.4.1.562.2.4.1.12.5.6.17
This group contains the common statistical data for a component in a digital hierarchy interface.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3DS1StatsEntry

lpDS3DS1StatsEntry 1.3.6.1.4.1.562.2.4.1.12.5.6.17.1
An entry in the lpDS3DS1StatsTable.
OBJECT-TYPE    
  LpDS3DS1StatsEntry  

lpDS3DS1RunningTime 1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.1
This attribute counts the number of seconds since the tributary was activated.
OBJECT-TYPE    
  Counter32  

lpDS3DS1ErrorFreeSec 1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.2
This attribute counts the number of seconds that the tributary has been in an error free state.
OBJECT-TYPE    
  Counter32  

lpDS3DS1ErroredSec 1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.3
This attribute counts the number of errored seconds the tributary has counted since it was activated. An errored second is declared when a second with one or more Code Violation Error events, or one or more Out Of Frame events occurs. A code violation error may be a CRC error or a BPV error. An Out Of Frame event occurs when 2 out of 5 framing bits are in error.
OBJECT-TYPE    
  Counter32  

lpDS3DS1SevErroredSec 1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.4
This attribute counts the number of severely errored seconds the tributary has counted since it was activated. A severely errored second occurs when a second with 320 or more Code Violation Error events or one or more Out Of Frame events occurs.
OBJECT-TYPE    
  Counter32  

lpDS3DS1SevErroredFrmSec 1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.5
This attribute counts the number of severely errored framing seconds the tributary has counted since it was activated A severely errored framing second occurs when a second with one or more Out Of Frame events occurs.
OBJECT-TYPE    
  Counter32  

lpDS3DS1UnavailSec 1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.6
This attribute counts the total number of seconds that the tributary has been in an unavailable signal state. An unavailable signal state occurs at the onset of 10 consecutive Severely Errored Seconds. The state is cleared at the onset of 10 seconds with no Severely Errored Seconds.
OBJECT-TYPE    
  Counter32  

lpDS3DS1CrcErrors 1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.7
This attribute counts the total number of CRC-6 errors. These will only be counted when the lineType is esf.
OBJECT-TYPE    
  Counter32  

lpDS3DS1FrmErrors 1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.8
This attribute counts the total number of frame errors. A frame error is an error in the framing bits.
OBJECT-TYPE    
  Counter32  

lpDS3DS1SlipErrors 1.3.6.1.4.1.562.2.4.1.12.5.6.17.1.9
The total number of times that the line experienced a controlled frame slip.
OBJECT-TYPE    
  Counter32  

lpDS3ProvTable 1.3.6.1.4.1.562.2.4.1.12.5.10
This group contains all of the provisioning data for a DS3 component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3ProvEntry

lpDS3ProvEntry 1.3.6.1.4.1.562.2.4.1.12.5.10.1
An entry in the lpDS3ProvTable.
OBJECT-TYPE    
  LpDS3ProvEntry  

lpDS3CbitParity 1.3.6.1.4.1.562.2.4.1.12.5.10.1.1
This attribute indicates if C-Bit parity has been turned ON or OFF. The CBIT component will appear under the DS3 component when the cbitParity attribute is set to on.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

lpDS3LineLength 1.3.6.1.4.1.562.2.4.1.12.5.10.1.2
This attribute defines the line length for equalization calculations for the DS3 line. The range is between 0 and 450 feet (1 metre = 3.28 feet). Note: There are currently only two ranges as far as the equalization calculation performed on the FP is concerned: 0 to 224ft and 225 to 450ft.
OBJECT-TYPE    
  Unsigned32 0..450  

lpDS3ClockingSource 1.3.6.1.4.1.562.2.4.1.12.5.10.1.3
This attribute defines the type of clocking source used for synchronizing the DS3 transmit clock: local means direct use of the local clock oscillator at its centre frequency; line means use of a signal phase-locked to the incoming DS3 line rate; module means the use of a signal phase-locked to the CP reference clock. Note that the multiport cell-based cards have one common clock source for all ports. For this reason, the following rules apply for the value of clockingSource across the board's three ports: All three clockingSource values must be 'local' OR All three clockingSource values must be 'module' OR One clockingSource value must be 'line' and the other two must be 'otherPort'. The there is no NS component provisioned, the default value for this attribute will be local. If the NS component has been provisioned, the default value is module, except for the 1pDS3C cards. For the 1pDS3C cards, the default and only valid value for this attribute is local. The clockingSource of the DS1 sub-component becomes the effective clocking source for this attribute. All the DS1 sub-components have the same clocking source.
OBJECT-TYPE    
  INTEGER local(0), line(1), module(2), otherPort(4)  

lpDS3ApplicationFramerName 1.3.6.1.4.1.562.2.4.1.12.5.10.1.4
This attribute defines the link to the software stack. It defines which application is running on top of the DS3 component.
OBJECT-TYPE    
  Link  

lpDS3Mapping 1.3.6.1.4.1.562.2.4.1.12.5.10.1.5
This attribute indicates if ATM cells will be mapped directly into the DS3 payload, or whether PLCP mapping will be used. The PLCP component will appear under the DS3 component when this attribute is set to plcp. This attribute will be ignored when set on frame-based cards.
OBJECT-TYPE    
  INTEGER direct(0), plcp(1)  

lpDS3CidDataTable 1.3.6.1.4.1.562.2.4.1.12.5.11
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3CidDataEntry

lpDS3CidDataEntry 1.3.6.1.4.1.562.2.4.1.12.5.11.1
An entry in the lpDS3CidDataTable.
OBJECT-TYPE    
  LpDS3CidDataEntry  

lpDS3CustomerIdentifier 1.3.6.1.4.1.562.2.4.1.12.5.11.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

lpDS3AdminInfoTable 1.3.6.1.4.1.562.2.4.1.12.5.12
This group contains the attributes pertaining to the vendor of the equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3AdminInfoEntry

lpDS3AdminInfoEntry 1.3.6.1.4.1.562.2.4.1.12.5.12.1
An entry in the lpDS3AdminInfoTable.
OBJECT-TYPE    
  LpDS3AdminInfoEntry  

lpDS3Vendor 1.3.6.1.4.1.562.2.4.1.12.5.12.1.1
This is the name of the vendor supplying the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..20)  

lpDS3CommentText 1.3.6.1.4.1.562.2.4.1.12.5.12.1.2
Any miscellaneous text about the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..60)  

lpDS3IfEntryTable 1.3.6.1.4.1.562.2.4.1.12.5.13
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3IfEntryEntry

lpDS3IfEntryEntry 1.3.6.1.4.1.562.2.4.1.12.5.13.1
An entry in the lpDS3IfEntryTable.
OBJECT-TYPE    
  LpDS3IfEntryEntry  

lpDS3IfAdminStatus 1.3.6.1.4.1.562.2.4.1.12.5.13.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpDS3IfIndex 1.3.6.1.4.1.562.2.4.1.12.5.13.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

lpDS3OperStatusTable 1.3.6.1.4.1.562.2.4.1.12.5.14
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3OperStatusEntry

lpDS3OperStatusEntry 1.3.6.1.4.1.562.2.4.1.12.5.14.1
An entry in the lpDS3OperStatusTable.
OBJECT-TYPE    
  LpDS3OperStatusEntry  

lpDS3SnmpOperStatus 1.3.6.1.4.1.562.2.4.1.12.5.14.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpDS3StateTable 1.3.6.1.4.1.562.2.4.1.12.5.15
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3StateEntry

lpDS3StateEntry 1.3.6.1.4.1.562.2.4.1.12.5.15.1
An entry in the lpDS3StateTable.
OBJECT-TYPE    
  LpDS3StateEntry  

lpDS3AdminState 1.3.6.1.4.1.562.2.4.1.12.5.15.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpDS3OperationalState 1.3.6.1.4.1.562.2.4.1.12.5.15.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpDS3UsageState 1.3.6.1.4.1.562.2.4.1.12.5.15.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpDS3AvailabilityStatus 1.3.6.1.4.1.562.2.4.1.12.5.15.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

lpDS3ProceduralStatus 1.3.6.1.4.1.562.2.4.1.12.5.15.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpDS3ControlStatus 1.3.6.1.4.1.562.2.4.1.12.5.15.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpDS3AlarmStatus 1.3.6.1.4.1.562.2.4.1.12.5.15.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpDS3StandbyStatus 1.3.6.1.4.1.562.2.4.1.12.5.15.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

lpDS3UnknownStatus 1.3.6.1.4.1.562.2.4.1.12.5.15.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

lpDS3OperTable 1.3.6.1.4.1.562.2.4.1.12.5.16
This group contains the common operational data for DS3 component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3OperEntry

lpDS3OperEntry 1.3.6.1.4.1.562.2.4.1.12.5.16.1
An entry in the lpDS3OperTable.
OBJECT-TYPE    
  LpDS3OperEntry  

lpDS3LosAlarm 1.3.6.1.4.1.562.2.4.1.12.5.16.1.1
This attribute displays whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOS defect is detected at the DS3 line interface upon observing 175 +/- 75 continuous pulse positions with no pulses of either positive or negative polarity. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the LOS alarm condition is cleared. The LOS alarm state is cleared after LOS defects have been absent for a period of 10 seconds +/- 0.5 seconds. The losAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpDS3LofAlarm 1.3.6.1.4.1.562.2.4.1.12.5.16.1.2
This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when Severely Errored Frame (SEF) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. A SEF defect is detected when 3 (or more) out of 16 (or fewer) F-bits are in error, or one (or more) M-bits in two (or more) out of four (or fewer) consecutive M-frames are in error. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the LOF alarm condition is cleared. The condition is cleared when framing has been achieved for a period of 10 seconds +/- 0.5 seconds. As long as SEF defects are detected, the node also transmits the far-end SEF/AIS defect indicator over the outgoing line. When not running in C-Bit Parity mode, the txRai attribute is also set to on when transmitting the far-end SEF/AIS defect indicator on the outgoing line. The lofAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpDS3RxAisAlarm 1.3.6.1.4.1.562.2.4.1.12.5.16.1.3
This attribute displays whether an Alarm Indication Signal (AIS) alarm state has been entered. An AIS alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/ - 0.5 seconds. An AIS defect is the occurrence of AIS (valid DS3 frame with payload containing the 1010...sequence and with C-Bits set to zero) in contiguous M-frames for a time greater than 100 milliseconds. If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the AIS alarm condition is cleared (after AIS has been no longer detected for a period of 10 seconds +/- 0.5 seconds). As long as AIS is detected, the node also transmits the far-end SEF/AIS defect indicator over the outgoing line. When not running in C-Bit Parity mode, the txRai attribute is also set to on when transmitting the far- end SEF/AIS defect indicator on the outgoing line. The rxAisAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpDS3RxRaiAlarm 1.3.6.1.4.1.562.2.4.1.12.5.16.1.4
This attribute displays whether a Remote Alarm Indication (RAI) alarm state has been entered. When not running the C-Bit Parity mode, the RAI alarm state is entered when the far-end SEF/AIS defect indicator has been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds on the incoming DS3 line. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the RAI alarm condition is cleared. The condition is cleared when the far-end SEF/AIS defect indicator has not been detected for 10 seconds +/- 0.5 seconds. When running the C-Bit Parity mode, the RAI alarm state is entered upon detection of a far-end alarm over the Far-End Alarm and Control (FEAC) channel. The RAI alarm state is exited as soon as no more far-end alarm is detected on the FEAC channel. The far- end alarms that can be detected on the FEAC channel and that cause the RAI alarm state to be entered are: equipment failure alarm (service affecting), LOS alarm, LOF alarm, idle and AIS alarm. The rxRaiAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpDS3RxIdle 1.3.6.1.4.1.562.2.4.1.12.5.16.1.5
This attribute displays whether an Idle failure condition has been reported on the DS3 port. An Idle condition is reported when DS3 Idle defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The DS3 Idle defect is the occurrence of a valid DS3 frame with the information bits set to a 11001100.. sequence. If the DS3 Idle defects are intermittently occurring, the DS3 Idle defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the Idle failure condition is cleared. The failure condition is cleared when the DS3 idle pattern has not been detected for at least 10 seconds +/- 0.5 seconds. The rxIdle attribute is always set to off when the component has been locked and left offline. The idle pattern indicates that the far-end is physically connected but not put in service. For instance, DS3 idle is transmitted on the outgoing line when the DS3 component is locked and not used for operational testing.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpDS3TxAis 1.3.6.1.4.1.562.2.4.1.12.5.16.1.6
This attribute displays whether an Alarm Indication Signal (AIS) alarm is being transmitted on the DS3 line. Currently, AIS is never transmitted by a Passport DS3 node.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpDS3TxRai 1.3.6.1.4.1.562.2.4.1.12.5.16.1.7
When not running C-Bit Parity mode, this attribute displays whether the far-end SEF/AIS defect indicator is transmitted over the outgoing line when the DS3 component has been unlocked or used in operational testing. When running in C-Bit Parity mode, this attribute displays whether a far-end alarm is sent over the Far-End Alarm and Control (FEAC) channel when the DS3 component has been unlocked or used in operational testing. When the DS3 component is locked and not used in operational testing, this attribute is always set to off.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpDS3TxIdle 1.3.6.1.4.1.562.2.4.1.12.5.16.1.8
This attribute displays whether the DS3 Idle signal is transmitted over the outgoing line. DS3 Idle is sent when the DS3 component has been locked and not used in operational testing.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpDS3StatsTable 1.3.6.1.4.1.562.2.4.1.12.5.17
This group contains the specific DS3 common operational data for a DS3 component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS3StatsEntry

lpDS3StatsEntry 1.3.6.1.4.1.562.2.4.1.12.5.17.1
An entry in the lpDS3StatsTable.
OBJECT-TYPE    
  LpDS3StatsEntry  

lpDS3RunningTime 1.3.6.1.4.1.562.2.4.1.12.5.17.1.1
This attribute indicates the total number of seconds since the DS3 component has been activated and been in unlocked state or used for operational testing. All the other error counts that follow as well as each DS3 subcomponent's error counts can be updated when this count is active.
OBJECT-TYPE    
  Counter32  

lpDS3ErrorFreeSec 1.3.6.1.4.1.562.2.4.1.12.5.17.1.2
This attribute indicates the number of seconds that the DS3 port has been in an error free state.
OBJECT-TYPE    
  Counter32  

lpDS3LineCodeViolations 1.3.6.1.4.1.562.2.4.1.12.5.17.1.3
This attribute indicates the total number of Line Code Violations (LCV) detected. A DS3 Line Code Violation is a B3Zs error. LCV counting is inhibited for second intervals where Line Severely Errored Second (LSES) is counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  Counter32  

lpDS3LineErroredSec 1.3.6.1.4.1.562.2.4.1.12.5.17.1.4
This attribute indicates the total number of Line Errored Seconds (LES) that have been counted. A LES is declared for second intervals containing one or more LCV or one or more Loss Of Signal (LOS) defects.
OBJECT-TYPE    
  Counter32  

lpDS3LineSevErroredSec 1.3.6.1.4.1.562.2.4.1.12.5.17.1.5
This attribute indicates the total number of Line Severely Errored Seconds (LSES) that have been counted. A LSES is declared for second intervals containing more than 44 LCVs or one or more LOS defects.
OBJECT-TYPE    
  Counter32  

lpDS3LineLosSec 1.3.6.1.4.1.562.2.4.1.12.5.17.1.6
This attribute indicates the total number of Line LOS Seconds (LOSS) that have been counted. A LOSS is declared for second intervals containing one or more LOS defects.
OBJECT-TYPE    
  Counter32  

lpDS3LineFailures 1.3.6.1.4.1.562.2.4.1.12.5.17.1.7
This attribute indicates the total number of times that a line failure (LOS failure) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  Counter32  

lpDS3PathCodeViolations 1.3.6.1.4.1.562.2.4.1.12.5.17.1.8
This attribute indicates the total number of Path Code Violations (PCVs) detected. Each PCV corresponds to a P-bit parity error, or possibly a frame error or a disagreement between P-bits or X-bits. PCV counting is inhibited over second intervals where a Path Severely Errored Second (PSES) is counted. Counting of PCVs is also inhibited over second intervals where a Path Unavailable Second (PUAS) is counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  Counter32  

lpDS3PathErroredSec 1.3.6.1.4.1.562.2.4.1.12.5.17.1.9
This attribute indicates the total number of Path Errored Seconds (PESs) that have been counted. A PES is declared for second intervals containing one or more Path Code Violations (PCV) or one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of Path Errored Seconds is inhibited when Path Unavailable Seconds (PUAS) is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

lpDS3PathSevErroredSec 1.3.6.1.4.1.562.2.4.1.12.5.17.1.10
This attribute indicates the total number of Path Severely Errored Seconds (PSESs) that have been counted. A PSES is declared for second intervals containing more than 44 PCVs or one or more SEF or AIS defects. Counting of PSESs is inhibited when Path Unavailable Seconds (PUAS) is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

lpDS3PathSefAisSec 1.3.6.1.4.1.562.2.4.1.12.5.17.1.11
This attribute indicates the total number of SEF/AIS Seconds (PSASs). A PSAS is declared for second intervals containing one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of PSAS is inhibited when Path Unavailable Seconds (PUAS) is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

lpDS3PathUnavailSec 1.3.6.1.4.1.562.2.4.1.12.5.17.1.12
This attribute indicates the total number of one second intervals for which the DS3 path is unavailable. The DS3 path becomes unavailable at the onset of 10 consecutive Path Severely Errored Seconds (PSES). The 10 PSESs are included in the unavailable time. Once unavailable, the DS3 path becomes available at the onset of 10 contiguous seconds with no PSES. The 10 seconds with no PSES are excluded from the unavailable time. For second intervals where PUAS is counted, counting of Path Coding Violations (PCV), Path Errored Seconds (PES), Path Severely Errored Seconds (PSES) and Path Sef/Ais Seconds (PSAS) is inhibited.
OBJECT-TYPE    
  Counter32  

lpDS3PathFailures 1.3.6.1.4.1.562.2.4.1.12.5.17.1.13
This attribute indicates the total number of times that a path failure (LOF/AIS failure) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  Counter32  

lpE3 1.3.6.1.4.1.562.2.4.1.12.6
OBJECT IDENTIFIER    

lpE3RowStatusTable 1.3.6.1.4.1.562.2.4.1.12.6.1
This entry controls the addition and deletion of lpE3 components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE3RowStatusEntry

lpE3RowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.6.1.1
A single entry in the table represents a single lpE3 component.
OBJECT-TYPE    
  LpE3RowStatusEntry  

lpE3RowStatus 1.3.6.1.4.1.562.2.4.1.12.6.1.1.1
This variable is used as the basis for SNMP naming of lpE3 components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

lpE3ComponentName 1.3.6.1.4.1.562.2.4.1.12.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpE3StorageType 1.3.6.1.4.1.562.2.4.1.12.6.1.1.4
This variable represents the storage type value for the lpE3 tables.
OBJECT-TYPE    
  StorageType  

lpE3Index 1.3.6.1.4.1.562.2.4.1.12.6.1.1.10
This variable represents the index for the lpE3 tables.
OBJECT-TYPE    
  Integer32 0..2  

lpE3Test 1.3.6.1.4.1.562.2.4.1.12.6.2
OBJECT IDENTIFIER    

lpE3TestRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.6.2.1
This entry controls the addition and deletion of lpE3Test components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE3TestRowStatusEntry

lpE3TestRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.6.2.1.1
A single entry in the table represents a single lpE3Test component.
OBJECT-TYPE    
  LpE3TestRowStatusEntry  

lpE3TestRowStatus 1.3.6.1.4.1.562.2.4.1.12.6.2.1.1.1
This variable is used as the basis for SNMP naming of lpE3Test components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpE3TestComponentName 1.3.6.1.4.1.562.2.4.1.12.6.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpE3TestStorageType 1.3.6.1.4.1.562.2.4.1.12.6.2.1.1.4
This variable represents the storage type value for the lpE3Test tables.
OBJECT-TYPE    
  StorageType  

lpE3TestIndex 1.3.6.1.4.1.562.2.4.1.12.6.2.1.1.10
This variable represents the index for the lpE3Test tables.
OBJECT-TYPE    
  NonReplicated  

lpE3TestStateTable 1.3.6.1.4.1.562.2.4.1.12.6.2.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE3TestStateEntry

lpE3TestStateEntry 1.3.6.1.4.1.562.2.4.1.12.6.2.10.1
An entry in the lpE3TestStateTable.
OBJECT-TYPE    
  LpE3TestStateEntry  

lpE3TestAdminState 1.3.6.1.4.1.562.2.4.1.12.6.2.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpE3TestOperationalState 1.3.6.1.4.1.562.2.4.1.12.6.2.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpE3TestUsageState 1.3.6.1.4.1.562.2.4.1.12.6.2.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpE3TestSetupTable 1.3.6.1.4.1.562.2.4.1.12.6.2.11
This group contains all of the operational data for a Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE3TestSetupEntry

lpE3TestSetupEntry 1.3.6.1.4.1.562.2.4.1.12.6.2.11.1
An entry in the lpE3TestSetupTable.
OBJECT-TYPE    
  LpE3TestSetupEntry  

lpE3TestPurpose 1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.1
This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
OBJECT-TYPE    
  AsciiString SIZE(0..40)  

lpE3TestType 1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.2
This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
OBJECT-TYPE    
  INTEGER card(0), manual(1), localLoop(2), remoteLoop(3), externalLoop(4), payloadLoop(5), remoteLoopThisTrib(6), v54RemoteLoop(7), pn127RemoteLoop(8)  

lpE3TestFrmSize 1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.3
This attribute defines the size of the test data frames in number of bytes.
OBJECT-TYPE    
  Unsigned32 4..4096  

lpE3TestFrmPatternType 1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.4
This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
OBJECT-TYPE    
  INTEGER ccitt32kBitPattern(0), ccitt8MBitPattern(1), customizedPattern(2)  

lpE3TestCustomizedPattern 1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.5
This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
OBJECT-TYPE    
  Hex 0..4294967295  

lpE3TestDataStartDelay 1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.6
This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
OBJECT-TYPE    
  Unsigned32 0..1814400  

lpE3TestDisplayInterval 1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.7
This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
OBJECT-TYPE    
  Unsigned32 0..30240  

lpE3TestDuration 1.3.6.1.4.1.562.2.4.1.12.6.2.11.1.8
This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
OBJECT-TYPE    
  Unsigned32 1..30240  

lpE3TestResultsTable 1.3.6.1.4.1.562.2.4.1.12.6.2.12
This group contains all the statistics related attributes of the Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE3TestResultsEntry

lpE3TestResultsEntry 1.3.6.1.4.1.562.2.4.1.12.6.2.12.1
An entry in the lpE3TestResultsTable.
OBJECT-TYPE    
  LpE3TestResultsEntry  

lpE3TestElapsedTime 1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.1
This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
OBJECT-TYPE    
  Counter32  

lpE3TestTimeRemaining 1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.2
This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

lpE3TestCauseOfTermination 1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.3
This attribute records the reason the test is terminated.
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4), hardwareReconfigured(5)  

lpE3TestBitsTx 1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.4
This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpE3TestBytesTx 1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.5
This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpE3TestFrmTx 1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.6
This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpE3TestBitsRx 1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.7
This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpE3TestBytesRx 1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.8
This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpE3TestFrmRx 1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.9
This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpE3TestErroredFrmRx 1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.10
This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
OBJECT-TYPE    
  PassportCounter64  

lpE3TestBitErrorRate 1.3.6.1.4.1.562.2.4.1.12.6.2.12.1.11
This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
OBJECT-TYPE    
  AsciiString SIZE(5)  

lpE3G832 1.3.6.1.4.1.562.2.4.1.12.6.3
OBJECT IDENTIFIER    

lpE3G832RowStatusTable 1.3.6.1.4.1.562.2.4.1.12.6.3.1
This entry controls the addition and deletion of lpE3G832 components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE3G832RowStatusEntry

lpE3G832RowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.6.3.1.1
A single entry in the table represents a single lpE3G832 component.
OBJECT-TYPE    
  LpE3G832RowStatusEntry  

lpE3G832RowStatus 1.3.6.1.4.1.562.2.4.1.12.6.3.1.1.1
This variable is used as the basis for SNMP naming of lpE3G832 components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

lpE3G832ComponentName 1.3.6.1.4.1.562.2.4.1.12.6.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpE3G832StorageType 1.3.6.1.4.1.562.2.4.1.12.6.3.1.1.4
This variable represents the storage type value for the lpE3G832 tables.
OBJECT-TYPE    
  StorageType  

lpE3G832Index 1.3.6.1.4.1.562.2.4.1.12.6.3.1.1.10
This variable represents the index for the lpE3G832 tables.
OBJECT-TYPE    
  NonReplicated  

lpE3G832ProvisionedTable 1.3.6.1.4.1.562.2.4.1.12.6.3.10
This group contains the provisionable data for the G832 component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE3G832ProvisionedEntry

lpE3G832ProvisionedEntry 1.3.6.1.4.1.562.2.4.1.12.6.3.10.1
An entry in the lpE3G832ProvisionedTable.
OBJECT-TYPE    
  LpE3G832ProvisionedEntry  

lpE3G832TrailTraceTransmitted 1.3.6.1.4.1.562.2.4.1.12.6.3.10.1.1
This attribute indicates the E.164 address which is to be encoded in the trail access point identifier, which is transmitted using the Trail Trace (TR) field of the transmitted E3 Frame. Both the expected trail access point identifier and the transmitted trail access point identifier are provisionable attributes of the G832 component. The 16 byte Trail Trace frame is composed of one byte containing a frame start marker and a CRC-7 calculation over the previous frame, and 15 bytes for transporting an E.164 address. If less than the full 15 bytes are used, the address is padded with NULL characters.
OBJECT-TYPE    
  AsciiString SIZE(0..15)  

lpE3G832TrailTraceExpected 1.3.6.1.4.1.562.2.4.1.12.6.3.10.1.2
This attribute indicates the E.164 address which is expected in the trail access point identifier, which is transmitted using the Trail Trace (TR) field of the transmitted E3 Frame. Both the expected trail access point identifier and the transmitted trail access point identifier are provisionable attributes of the G832 component. The 16 byte Trail Trace frame is composed of one byte containing a frame start marker and a CRC-7 calculation over the previous frame, and 15 bytes for transporting an E.164 address. If less than the full 15 bytes are used, the address is padded with NULL characters.
OBJECT-TYPE    
  AsciiString SIZE(0..15)  

lpE3G832OperationalTable 1.3.6.1.4.1.562.2.4.1.12.6.3.11
This group contains the operational data for the G832 component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE3G832OperationalEntry

lpE3G832OperationalEntry 1.3.6.1.4.1.562.2.4.1.12.6.3.11.1
An entry in the lpE3G832OperationalTable.
OBJECT-TYPE    
  LpE3G832OperationalEntry  

lpE3G832UnexpectedPayloadType 1.3.6.1.4.1.562.2.4.1.12.6.3.11.1.1
This attribute displays whether the Unexpected Payload Type (UPT) alarm state has been entered. The UPT alarm state is entered when UPT defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The UPT defect is reported when a received frame fails to agree with the expected Payload Type. If the UPT defects are intermittently occurring, the UPT defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle.. The UPT alarm is cleared when the Payload Type in the received frame agrees with the expected Payload Type for a period of 10 seconds +/- 0.5 seconds. The unexpectedPayloadType attribute is always set to off when the E3 component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpE3G832TrailTraceMismatch 1.3.6.1.4.1.562.2.4.1.12.6.3.11.1.2
This attribute displays whether the Trail Trace Mismatch (TTM) alarm state has been entered. The TTM alarm state is entered when TTM defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The TTM defect is reported when the trail access point identifier contained in the Trail Trace (TR) field in the received frame fails to agree with the expected identifier. If the TTM defects are intermittently occurring, the TTM defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The TTM alarm is cleared when the trail access point identifier in the received frame agrees with the expected identifier for a period of 10 seconds +/- 0.5 seconds. The trailTraceMismatch attribute is always set to off when the E3 component has been locked and left offline. Both the expected trail access identifier and the transmitted trail access identifier are provisionable attributes of the G832 component.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpE3G832TimingMarker 1.3.6.1.4.1.562.2.4.1.12.6.3.11.1.3
Indicates whether or not the timing source at the far-end node is traceable to a Primary Reference Clock. The timingMarker indication is controlled by the timing marker bit in the G832 MA byte. If the received timing marker bit is 1 for five consecutive frames, and five consecutive 0s are not received for two seconds, the timingMarker indication will be set to not traceable. If the received timing marker bit is 0 for five consecutive frames and five consecutive 1s are not received for two seconds, the timingMarker indication will be set to traceable.
OBJECT-TYPE    
  INTEGER notTraceable(0), traceable(1)  

lpE3G832TrailTraceReceived 1.3.6.1.4.1.562.2.4.1.12.6.3.11.1.4
This attribute indicates the 15 byte E.164 address which is currently being received in the trail trace (TR) field of the E3 G832 frame. If this attribute differs from the provisioned trailTraceTransmitted string a trail trace mismatch (TTM) defect is reported, possibly resulting in a TTM alarm, as described for operational attribute trailTraceMismatch.
OBJECT-TYPE    
  AsciiString SIZE(0..15)  

lpE3G832StatsTable 1.3.6.1.4.1.562.2.4.1.12.6.3.12
This group contains the statistical data for the G832 component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE3G832StatsEntry

lpE3G832StatsEntry 1.3.6.1.4.1.562.2.4.1.12.6.3.12.1
An entry in the lpE3G832StatsTable.
OBJECT-TYPE    
  LpE3G832StatsEntry  

lpE3G832FarEndErrorFreeSec 1.3.6.1.4.1.562.2.4.1.12.6.3.12.1.1
This attribute indicates the number of seconds that the E3 line has not suffered any G832 errors.
OBJECT-TYPE    
  Counter32  

lpE3G832FarEndCodeViolations 1.3.6.1.4.1.562.2.4.1.12.6.3.12.1.2
A count of E3 frames containing a Far-End Block Error (FEBE). A FEBE is reported over the FEBE bit each time the far-end terminal detects a BIP-8 error in a received E3 frame. For second intervals where Far End Unavailable Seconds (FEUAS) or Far End Severely Errored Seconds (FESES) are counted, counting of FECVs is inhibited. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  Counter32  

lpE3G832FarEndErroredSec 1.3.6.1.4.1.562.2.4.1.12.6.3.12.1.3
This attribute indicates the total number of Far-End Errored Seconds (FEES). A FEES is declared for second intervals containing with one or more Far-End Coding Violations (FECV) or one or more Far-End Receive Failure (FERF) defects. A FERF defect occurs when the FERF bit in the received frame is set to one. For second intervals where Far End Unavailable Seconds (FEUAS) are counted, counting of FEESs is inhibited.
OBJECT-TYPE    
  Counter32  

lpE3G832FarEndSevErroredSec 1.3.6.1.4.1.562.2.4.1.12.6.3.12.1.4
This attribute indicates the total number of Far-End Severely Errored Seconds (FESESs). A FESES is declared for second intervals containing more than 34 Far-End Coding Violations (FECV) or one or more Far-End Receive Failure (FERF) defects. For second intervals where a Far-End Severely Errored Seconds (FESES) is counted, counting of FECVs is inhibited. For second intervals where Far End Unavailable Seconds (FEUAS) are counted, counting of FESESs is inhibited.
OBJECT-TYPE    
  Counter32  

lpE3G832FarEndSefAisSec 1.3.6.1.4.1.562.2.4.1.12.6.3.12.1.5
This attribute indicates the total number of Far-End SEF/AIS Seconds (FESAS). A FESAS is declared for second intervals containing one or more Far-End Receive Failure (FERF) defects. For second intervals where Far End Unavailable Seconds (FEUAS) are counted, counting of FESAS is inhibited.
OBJECT-TYPE    
  Counter32  

lpE3G832FarEndUnavailSec 1.3.6.1.4.1.562.2.4.1.12.6.3.12.1.6
This attribute indicates the total number of one second intervals for which the E3 far-end path is unavailable. The E3 far-end path becomes unavailable at the onset of 10 consecutive Far End Severely Errored Seconds (FESES). It comes available at the onset of 10 contiguous seconds with no FESES. The unavailable time includes the initial 10 seconds to enter the unavailable state but not the 10 seconds to exit the state For second intervals where FEUAS is counted, counting of Far End Coding Violations (FECV), Far- End Errored Seconds (FEES), Far-End Severely Errored Seconds (FESES) and Far-End SefAis Seconds (FESAS) are inhibited.
OBJECT-TYPE    
  Counter32  

lpE3Plcp 1.3.6.1.4.1.562.2.4.1.12.6.4
OBJECT IDENTIFIER    

lpE3PlcpRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.6.4.1
This entry controls the addition and deletion of lpE3Plcp components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE3PlcpRowStatusEntry

lpE3PlcpRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.6.4.1.1
A single entry in the table represents a single lpE3Plcp component.
OBJECT-TYPE    
  LpE3PlcpRowStatusEntry  

lpE3PlcpRowStatus 1.3.6.1.4.1.562.2.4.1.12.6.4.1.1.1
This variable is used as the basis for SNMP naming of lpE3Plcp components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpE3PlcpComponentName 1.3.6.1.4.1.562.2.4.1.12.6.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpE3PlcpStorageType 1.3.6.1.4.1.562.2.4.1.12.6.4.1.1.4
This variable represents the storage type value for the lpE3Plcp tables.
OBJECT-TYPE    
  StorageType  

lpE3PlcpIndex 1.3.6.1.4.1.562.2.4.1.12.6.4.1.1.10
This variable represents the index for the lpE3Plcp tables.
OBJECT-TYPE    
  NonReplicated  

lpE3PlcpOperationalTable 1.3.6.1.4.1.562.2.4.1.12.6.4.10
This group contains the operational data for the PLCP component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE3PlcpOperationalEntry

lpE3PlcpOperationalEntry 1.3.6.1.4.1.562.2.4.1.12.6.4.10.1
An entry in the lpE3PlcpOperationalTable.
OBJECT-TYPE    
  LpE3PlcpOperationalEntry  

lpE3PlcpLofAlarm 1.3.6.1.4.1.562.2.4.1.12.6.4.10.1.1
This attribute displays whether a PLCP Loss Of Frame (LOF) failure alarm state has been entered. An LOF failure is declared when a PLCP LOF defect persists for 2.5 s +/- 0.5 s. An LOF defect occurs when an OOF (Out of Frame) state persists for more than 1 ms. If the OOF events are intermittent, the LOF defect counter is decremented at a rate of 1/12 (for DS3 PLCP) or 1/9 (for G.751 E3 PLCP) of the incrementing rate, with all measurements based on a 200 ms polling cycle. An OOF event (also known as a PLCP SEF event) is declared when an error is detected in both the A1 and A2 octets, or when two consecutive POHIDs are found in error. OOF is removed when two valid sets of framing octets and two valid and sequential POHID octets have been found. The LOF defect is removed when the defect counter reaches zero, i.e. when OOF events are absent for more than 12 ms (DS3 PLCP) or 9 ms (G.751 E3 PLCP). LOF failure alarm is cleared when LOF defect is absent for 10.0 s +/- 0.5 s The DS3 or E3 component goes into an operational state of disabled until the LOF failure alarm is cleared. The terminal declaring the LOF failure alarm will transmit a PLCP RAI signal to the far-end for the duration of the alarm. The lofAlarm attribute is always set to off when the DS3 or E3 component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpE3PlcpRxRaiAlarm 1.3.6.1.4.1.562.2.4.1.12.6.4.10.1.2
This attribute displays whether a PLCP Remote Alarm Indication (RAI) failure alarm state has been entered. An RAI failure alarm occurs when ten consecutive PLCP RAI bits (bit 5 in the G1 byte) are high on the incoming line. An RAI failure alarm is cleared when ten consecutive RAI bits are set to 0. Note: Some standards call this alarm RFI. The rxRaiAlarm attribute is always set to off when the DS3 or E3 component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpE3PlcpStatsTable 1.3.6.1.4.1.562.2.4.1.12.6.4.11
This group contains the statistical data for the PLCP component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE3PlcpStatsEntry

lpE3PlcpStatsEntry 1.3.6.1.4.1.562.2.4.1.12.6.4.11.1
An entry in the lpE3PlcpStatsTable.
OBJECT-TYPE    
  LpE3PlcpStatsEntry  

lpE3PlcpErrorFreeSec 1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.1
This attribute indicates the number of seconds during which the near-end PLCP path layer had no errors.
OBJECT-TYPE    
  Counter32  

lpE3PlcpCodingViolations 1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.2
This attribute indicates the total number of BIP-8 Errors, framing pattern octet errors, and path overhead identification errors detected in received PLCP frames. Counting of PLCP CV is inhibited for second intervals where PLCP Severely Errored Framing Seconds (SEFS) or PLCP Unavailable Seconds (UAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  Counter32  

lpE3PlcpErroredSec 1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.3
This attribute indicates the number of seconds containing one or more PLCP Coding Violations (CV) or in which a PLCP Severely Errored Framing Second (SEFS) was counted. Counting of PLCP ES is inhibited during second intervals where PLCP Unavailable Seconds (UAS) are counted.
OBJECT-TYPE    
  Counter32  

lpE3PlcpSevErroredSec 1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.4
This attribute indicates the number of seconds containing 5 or more PLCPCVs or in which a PLCPSEFS was counted (i.e. a PLCP OOF event occurred). Counting of PLCP SES is inhibited during second intervals where PLCP Unavailable Seconds (UAS) are counted.
OBJECT-TYPE    
  Counter32  

lpE3PlcpSevErroredFramingSec 1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.5
This attribute indicates the number of seconds containing one or more PLCP Severely Errored Frame (SEF) events. An SEF event is equivalent to a PLCP OOF (Out of Frame) event. Counting of PLCPP SEFSs is inhibited for second intervals where PLCP Unavailable Seconds (UAS) are counted.
OBJECT-TYPE    
  Counter32  

lpE3PlcpUnavailSec 1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.6
This attribute indicates the number of seconds when the near-end PLCP layer is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP LOF (Loss of Frame) failure alarm state. The PLCP Path Layer becomes available again only after clearing this condition. For second intervals where PLCP UAS are counted, counting of PLCP Severely Errored Framing Seconds (SEFS), PLCP Coding Violations (CV), PLCP Errored Seconds (ES), PLCP Severely Errored Seconds (SES) and PLCP Far-End Severely Errored Seconds (FESES) is inhibited.
OBJECT-TYPE    
  Counter32  

lpE3PlcpFarEndErrorFreeSec 1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.7
This attribute indicates the number of seconds during which the far- end PLCP path layer had no errors.
OBJECT-TYPE    
  Counter32  

lpE3PlcpFarEndCodingViolations 1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.8
This attribute indicates the total number of PLCP Far-End Block Errors (FEBE) reported by the far-end terminal. Counting of FEBEs is inhibited for second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  Counter32  

lpE3PlcpFarEndErroredSec 1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.9
This attribute indicates the number of seconds containing one or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FEES is inhibited during second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted.
OBJECT-TYPE    
  Counter32  

lpE3PlcpFarEndSevErroredSec 1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.10
This attribute indicates the number of seconds containing 5 or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FESES is inhibited for second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted.
OBJECT-TYPE    
  Counter32  

lpE3PlcpFarEndUnavailableSec 1.3.6.1.4.1.562.2.4.1.12.6.4.11.1.11
This attribute indicates the number of seconds during which the PLCP far end is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP RAI (Remote Alarm Indication). Service becomes available again after this condition is cleared. For second intervals where PLCP FEUAS are counted, counting of PLCP Far-End Coding Violations (FECV), PLCP Far- End Errored Seconds (FEES), and PLCP Far-End Severely Errored Seconds (FESES) is inhibited.
OBJECT-TYPE    
  Counter32  

lpE3Cell 1.3.6.1.4.1.562.2.4.1.12.6.5
OBJECT IDENTIFIER    

lpE3CellRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.6.5.1
This entry controls the addition and deletion of lpE3Cell components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE3CellRowStatusEntry

lpE3CellRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.6.5.1.1
A single entry in the table represents a single lpE3Cell component.
OBJECT-TYPE    
  LpE3CellRowStatusEntry  

lpE3CellRowStatus 1.3.6.1.4.1.562.2.4.1.12.6.5.1.1.1
This variable is used as the basis for SNMP naming of lpE3Cell components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

lpE3CellComponentName 1.3.6.1.4.1.562.2.4.1.12.6.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpE3CellStorageType 1.3.6.1.4.1.562.2.4.1.12.6.5.1.1.4
This variable represents the storage type value for the lpE3Cell tables.
OBJECT-TYPE    
  StorageType  

lpE3CellIndex 1.3.6.1.4.1.562.2.4.1.12.6.5.1.1.10
This variable represents the index for the lpE3Cell tables.
OBJECT-TYPE    
  NonReplicated  

lpE3CellProvTable 1.3.6.1.4.1.562.2.4.1.12.6.5.10
This group contains the provisioning attributes for the AtmCell component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE3CellProvEntry

lpE3CellProvEntry 1.3.6.1.4.1.562.2.4.1.12.6.5.10.1
An entry in the lpE3CellProvTable.
OBJECT-TYPE    
  LpE3CellProvEntry  

lpE3CellAlarmActDelay 1.3.6.1.4.1.562.2.4.1.12.6.5.10.1.1
This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
OBJECT-TYPE    
  Unsigned32 0..2000  

lpE3CellScrambleCellPayload 1.3.6.1.4.1.562.2.4.1.12.6.5.10.1.2
Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

lpE3CellCorrectSingleBitHeaderErrors 1.3.6.1.4.1.562.2.4.1.12.6.5.10.1.3
This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

lpE3CellOperTable 1.3.6.1.4.1.562.2.4.1.12.6.5.11
This group contains the common operational attributes for the AtmCell component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE3CellOperEntry

lpE3CellOperEntry 1.3.6.1.4.1.562.2.4.1.12.6.5.11.1
An entry in the lpE3CellOperTable.
OBJECT-TYPE    
  LpE3CellOperEntry  

lpE3CellLcdAlarm 1.3.6.1.4.1.562.2.4.1.12.6.5.11.1.1
This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpE3CellStatsTable 1.3.6.1.4.1.562.2.4.1.12.6.5.12
This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE3CellStatsEntry

lpE3CellStatsEntry 1.3.6.1.4.1.562.2.4.1.12.6.5.12.1
An entry in the lpE3CellStatsTable.
OBJECT-TYPE    
  LpE3CellStatsEntry  

lpE3CellUncorrectableHecErrors 1.3.6.1.4.1.562.2.4.1.12.6.5.12.1.1
This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
OBJECT-TYPE    
  Counter32  

lpE3CellSevErroredSec 1.3.6.1.4.1.562.2.4.1.12.6.5.12.1.2
This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
OBJECT-TYPE    
  Counter32  

lpE3CellReceiveCellUtilization 1.3.6.1.4.1.562.2.4.1.12.6.5.12.1.3
This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  Gauge32 0..100  

lpE3CellTransmitCellUtilization 1.3.6.1.4.1.562.2.4.1.12.6.5.12.1.4
This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  Gauge32 0..100  

lpE3CellCorrectableHeaderErrors 1.3.6.1.4.1.562.2.4.1.12.6.5.12.1.5
This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
OBJECT-TYPE    
  Counter32  

lpE3ProvTable 1.3.6.1.4.1.562.2.4.1.12.6.10
This group contains all of the provisioning data for a E3 component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE3ProvEntry

lpE3ProvEntry 1.3.6.1.4.1.562.2.4.1.12.6.10.1
An entry in the lpE3ProvTable.
OBJECT-TYPE    
  LpE3ProvEntry  

lpE3LineLength 1.3.6.1.4.1.562.2.4.1.12.6.10.1.1
This attribute defines the line length for equalization calculations for the E3 line. The line length range is between 0 and 300 metres (1 metres = 3.28 feet).
OBJECT-TYPE    
  Unsigned32 0..300  

lpE3ClockingSource 1.3.6.1.4.1.562.2.4.1.12.6.10.1.2
This attribute defines the type of clocking source used for synchronizing the E3 transmit clock: local means direct use of the local clock oscillator at its centre frequency; line means use of a signal phase-locked to the incoming E3 line rate; module means the use of a signal phase-locked to the CP reference clock. Note that the multiport cell-based cards have one common clock source for each of the three ports. For this reason, the following rules apply for the value of clockingSource across the board's three ports: All three clockingSource values must be 'local' OR All three clockingSource values must be 'module' OR One clockingSource value must be 'line' and the other two must be 'otherPort'. The default value for this attribute will be module if a CP clock is available, and local otherwise.
OBJECT-TYPE    
  INTEGER local(0), line(1), module(2), otherPort(4)  

lpE3ApplicationFramerName 1.3.6.1.4.1.562.2.4.1.12.6.10.1.3
This attribute defines the link to the software stack. It defines which application is running on top of the E3 component.
OBJECT-TYPE    
  Link  

lpE3Mapping 1.3.6.1.4.1.562.2.4.1.12.6.10.1.4
This attribute indicates if ATM cells will be mapped directly into the E3 payload, or whether PLCP mapping will be used. The PLCP component will appear under the E3 component when this attribute is set to plcp. This attribute will be ignored when set on frame- based cards.
OBJECT-TYPE    
  INTEGER direct(0), plcp(1)  

lpE3Framing 1.3.6.1.4.1.562.2.4.1.12.6.10.1.5
This attribute indicates if the framing mode will be in accordance with the CCITT G.751 or G.832 specification. The G832 component will appear under the E3 component when this attribute is set to g832. This attribute may only be set on cell-based card types. Note also that this attribute may only be set to g751 if the mapping attribute is set to plcp. The default value of this attribute will be g751 for frame-based cards, and g832 for cell-based cards. Note: when E3 framing is changed from g832 to g751, the G832 component must be deleted.
OBJECT-TYPE    
  INTEGER g751(0), g832(1)  

lpE3LinkAlarmActivationThreshold 1.3.6.1.4.1.562.2.4.1.12.6.10.1.6
This attribute specifies the time interval between the detection of a sustained link failure and the activation of an alarm. It is provisionable for E3 cards.
OBJECT-TYPE    
  Unsigned32 100..2600  

lpE3LinkAlarmScanInterval 1.3.6.1.4.1.562.2.4.1.12.6.10.1.7
This attribute specifies the alarm scan timer polling interval. It determines how frequently the status of the link is monitored after a first link error interrupt. It is provisionable for E3 cards.
OBJECT-TYPE    
  Unsigned32 50..250  

lpE3CidDataTable 1.3.6.1.4.1.562.2.4.1.12.6.11
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE3CidDataEntry

lpE3CidDataEntry 1.3.6.1.4.1.562.2.4.1.12.6.11.1
An entry in the lpE3CidDataTable.
OBJECT-TYPE    
  LpE3CidDataEntry  

lpE3CustomerIdentifier 1.3.6.1.4.1.562.2.4.1.12.6.11.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

lpE3AdminInfoTable 1.3.6.1.4.1.562.2.4.1.12.6.12
This group contains the attributes pertaining to the vendor of the equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE3AdminInfoEntry

lpE3AdminInfoEntry 1.3.6.1.4.1.562.2.4.1.12.6.12.1
An entry in the lpE3AdminInfoTable.
OBJECT-TYPE    
  LpE3AdminInfoEntry  

lpE3Vendor 1.3.6.1.4.1.562.2.4.1.12.6.12.1.1
This is the name of the vendor supplying the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..20)  

lpE3CommentText 1.3.6.1.4.1.562.2.4.1.12.6.12.1.2
Any miscellaneous text about the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..60)  

lpE3IfEntryTable 1.3.6.1.4.1.562.2.4.1.12.6.13
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE3IfEntryEntry

lpE3IfEntryEntry 1.3.6.1.4.1.562.2.4.1.12.6.13.1
An entry in the lpE3IfEntryTable.
OBJECT-TYPE    
  LpE3IfEntryEntry  

lpE3IfAdminStatus 1.3.6.1.4.1.562.2.4.1.12.6.13.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpE3IfIndex 1.3.6.1.4.1.562.2.4.1.12.6.13.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

lpE3OperStatusTable 1.3.6.1.4.1.562.2.4.1.12.6.14
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE3OperStatusEntry

lpE3OperStatusEntry 1.3.6.1.4.1.562.2.4.1.12.6.14.1
An entry in the lpE3OperStatusTable.
OBJECT-TYPE    
  LpE3OperStatusEntry  

lpE3SnmpOperStatus 1.3.6.1.4.1.562.2.4.1.12.6.14.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpE3StateTable 1.3.6.1.4.1.562.2.4.1.12.6.15
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE3StateEntry

lpE3StateEntry 1.3.6.1.4.1.562.2.4.1.12.6.15.1
An entry in the lpE3StateTable.
OBJECT-TYPE    
  LpE3StateEntry  

lpE3AdminState 1.3.6.1.4.1.562.2.4.1.12.6.15.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpE3OperationalState 1.3.6.1.4.1.562.2.4.1.12.6.15.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpE3UsageState 1.3.6.1.4.1.562.2.4.1.12.6.15.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpE3AvailabilityStatus 1.3.6.1.4.1.562.2.4.1.12.6.15.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

lpE3ProceduralStatus 1.3.6.1.4.1.562.2.4.1.12.6.15.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpE3ControlStatus 1.3.6.1.4.1.562.2.4.1.12.6.15.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpE3AlarmStatus 1.3.6.1.4.1.562.2.4.1.12.6.15.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpE3StandbyStatus 1.3.6.1.4.1.562.2.4.1.12.6.15.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

lpE3UnknownStatus 1.3.6.1.4.1.562.2.4.1.12.6.15.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

lpE3OperTable 1.3.6.1.4.1.562.2.4.1.12.6.16
This group contains the common operational data for E3 component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE3OperEntry

lpE3OperEntry 1.3.6.1.4.1.562.2.4.1.12.6.16.1
An entry in the lpE3OperTable.
OBJECT-TYPE    
  LpE3OperEntry  

lpE3LosAlarm 1.3.6.1.4.1.562.2.4.1.12.6.16.1.1
This attribute displays whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects has been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOS defect is detected at the E3 line interface upon observing N continuous pulse positions with no pulses of either positive or negative polarity, where N is between 10 and 255. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the LOS alarm condition is cleared. The LOS alarm state is cleared when the LOS defects are absent for a period of 10 seconds +/- 0.5 seconds. The losAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpE3LofAlarm 1.3.6.1.4.1.562.2.4.1.12.6.16.1.2
This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when Severely Errored Frame (SEF) defects have been detected and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An E3 SEF defect is reported after detecting Frame Alignment Signal (FAS) errors on 4 consecutive E3 frames received on the incoming line. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the LOF alarm condition is cleared. The condition is cleared when E3 framing has been achieved for a period of 10 seconds +/- 0.5 seconds. As long as SEF defects are detected, the node also transmits the far-end SEF/AIS (in G.751 E3) or FERF (in G.832) defect indicator over the outgoing line. The txRai attribute is set to on when transmitting the far-end SEF/AIS defect indicator on the outgoing line. The lofAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpE3RxAisAlarm 1.3.6.1.4.1.562.2.4.1.12.6.16.1.3
This attribute displays whether an Alarm Indication Signal (AIS) alarm when state has been entered. An AIS alarm state is entered when AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds on the incoming E3 line. An AIS defect is the occurrence of the AIS (unframed signal with a density of zeros below a certain threshold such as defined by ITU Recommendation G.775). If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/ 10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the AIS alarm condition is cleared (after AIS has been no longer detected for a period of 10 seconds +/- 0.5 seconds). As long as AIS is detected on the incoming line, the node also transmits the far-end SEF/AIS (in G.751 E3) or FERF (in G.832) defect indicator over the outgoing line. The txRai attribute is set to on when transmitting the far-end SEF/AIS defect indicator on the outgoing line. The rxAisAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpE3RxRaiAlarm 1.3.6.1.4.1.562.2.4.1.12.6.16.1.4
This attribute displays whether a Remote Alarm Indication (RAI) alarm state has been entered. A RAI alarm state is entered when far- end SEF/AIS defects (or Far-End Receive Failure (FERF) defects in G.832 E3 Framing mode) have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds on the E3 incoming line. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the RAI alarm condition is cleared. The condition is cleared when the far-end defect indicator has not been detected for 10 seconds +/- 0.5 seconds. The declaration of a RAI Alarm is usually a signal that the far end facility is unable to gain synchronization. The rxRaiAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpE3TxAis 1.3.6.1.4.1.562.2.4.1.12.6.16.1.5
This attribute displays whether an AIS alarm is being transmitted on the E3 line. AIS is transmitted on the outgoing line when the E3 component is locked and not used for operational testing.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpE3TxRai 1.3.6.1.4.1.562.2.4.1.12.6.16.1.6
This attribute displays whether the far-end SEF/AIS defect indicator is transmitted over the outgoing line when the E3 component has been unlocked or used in operational testing. When the E3 component is locked and not used in operational testing, this attribute is always set to off. The far-end SEF/AIS defect indicator is transmitted over the outgoing line when SEF/AIS defects are detected on the incoming line. In G.832 E3 Framing mode, the FERF bit is set to '1' to transmit the SEF/AIS defect indicator.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpE3StatsTable 1.3.6.1.4.1.562.2.4.1.12.6.17
This group contains the common operational data for E3 component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE3StatsEntry

lpE3StatsEntry 1.3.6.1.4.1.562.2.4.1.12.6.17.1
An entry in the lpE3StatsTable.
OBJECT-TYPE    
  LpE3StatsEntry  

lpE3RunningTime 1.3.6.1.4.1.562.2.4.1.12.6.17.1.1
This attribute indicates the total number of seconds since the E3 component has been activated and been in unlocked state or used for operational testing. All the other error counts that follow as well as each E3 subcomponent's error counts can be updated when this count is active.
OBJECT-TYPE    
  Counter32  

lpE3ErrorFreeSec 1.3.6.1.4.1.562.2.4.1.12.6.17.1.2
This attribute indicates the number of seconds that the E3 port has been in an error free state.
OBJECT-TYPE    
  Counter32  

lpE3LineCodeViolations 1.3.6.1.4.1.562.2.4.1.12.6.17.1.3
This attribute indicates the total number of Line Code Violations (LCV) detected. An E3 Line Code Violation is an HDB3 coded signal error. LCV counting is inhibited for second intervals where a Line Severely Errored Second (LSES) is counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  Counter32  

lpE3LineErroredSec 1.3.6.1.4.1.562.2.4.1.12.6.17.1.4
This attribute indicates the total number of Line Errored Seconds (LES) that have been counted. A LES is declared for interval seconds containing one or more Line Code Violations (LCV) or one or more Loss Of Signal (LOS) defects.
OBJECT-TYPE    
  Counter32  

lpE3LineSevErroredSec 1.3.6.1.4.1.562.2.4.1.12.6.17.1.5
This attribute indicates the total number of Line Severely Errored Seconds (LSES) that have been counted. A LSES is declared for second intervals containing more than 34 Line Code Violations (LCV) or one or more Loss of Signal (LOS) defects.
OBJECT-TYPE    
  Counter32  

lpE3LineLosSec 1.3.6.1.4.1.562.2.4.1.12.6.17.1.6
This attribute indicates the total number of Line LOS Seconds (LOSS) that have been counted. A LOSS is declared for second intervals containing one or more Loss of Signal (LOS) defects.
OBJECT-TYPE    
  Counter32  

lpE3LineFailures 1.3.6.1.4.1.562.2.4.1.12.6.17.1.7
This attribute indicates the total number of times that a line failure (LOS failure) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  Counter32  

lpE3PathCodeViolations 1.3.6.1.4.1.562.2.4.1.12.6.17.1.8
This attribute indicates the total number of Path Code Violations (PCV) detected. An E3 PCV is an error in the Frame Alignment (FA) signal, or, in G.832 Framing Mode, an error in the Frame Alignment signal or a BIP-8 error. PCV counting is inhibited over second intervals where a Path Severely Errored Second (PSES) is counted. Counting of PCVs is also inhibited over second intervals where a Path Unavailable Second (PUAS) is counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  Counter32  

lpE3PathErroredSec 1.3.6.1.4.1.562.2.4.1.12.6.17.1.9
This attribute indicates the total number of Path Errored Seconds (PES) that have been counted. A PES is declared for second intervals containing one or more Path Code Violations (PCV) or one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of Path Errored Seconds is inhibited when a Path Unavailable Second (PUAS) is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

lpE3PathSevErroredSec 1.3.6.1.4.1.562.2.4.1.12.6.17.1.10
This attribute indicates the total number of Path Severely Errored Seconds (PSES) that have been counted. A PSES is declared for second intervals containing more than 22 (G.751 E3) or 34 (G.832 E3) Path Code Violations (PCV) or one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of PSESs is inhibited when a Path Unavailable Second (PUAS) is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

lpE3PathSefAisSec 1.3.6.1.4.1.562.2.4.1.12.6.17.1.11
This attribute indicates the total number of Path SEF/AIS Seconds (PSAS). A PSAS is declared for second intervals containing one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of PSAS is inhibited when Path Unavailable Seconds (PUAS) is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

lpE3PathUnavailSec 1.3.6.1.4.1.562.2.4.1.12.6.17.1.12
This attribute indicates the total number of one second intervals for which the E3 path is unavailable. The E3 path becomes unavailable at the onset of 10 consecutive Path Severely Errored Seconds (PSES). The 10 PSESs are included in the unavailable time. Once unavailable, the E3 path becomes available at the onset of 10 contiguous seconds with no PSES. The 10 seconds with no PSES are excluded from the unavailable time. For second intervals where PUAS is counted, counting of Path Code Violations (PCV), Path Errored Seconds (PES), Path Severely Errored Seconds (PSES) and Path SefAis Seconds (PSAS) is inhibited.
OBJECT-TYPE    
  Counter32  

lpE3PathFailures 1.3.6.1.4.1.562.2.4.1.12.6.17.1.13
This attribute indicates the total number of times that a path failure (LOF/AIS failure) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  Counter32  

lpDS1 1.3.6.1.4.1.562.2.4.1.12.7
OBJECT IDENTIFIER    

lpDS1RowStatusTable 1.3.6.1.4.1.562.2.4.1.12.7.1
This entry controls the addition and deletion of lpDS1 components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1RowStatusEntry

lpDS1RowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.7.1.1
A single entry in the table represents a single lpDS1 component.
OBJECT-TYPE    
  LpDS1RowStatusEntry  

lpDS1RowStatus 1.3.6.1.4.1.562.2.4.1.12.7.1.1.1
This variable is used as the basis for SNMP naming of lpDS1 components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

lpDS1ComponentName 1.3.6.1.4.1.562.2.4.1.12.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpDS1StorageType 1.3.6.1.4.1.562.2.4.1.12.7.1.1.4
This variable represents the storage type value for the lpDS1 tables.
OBJECT-TYPE    
  StorageType  

lpDS1Index 1.3.6.1.4.1.562.2.4.1.12.7.1.1.10
This variable represents the index for the lpDS1 tables.
OBJECT-TYPE    
  Integer32 0..7  

lpDS1Chan 1.3.6.1.4.1.562.2.4.1.12.7.2
OBJECT IDENTIFIER    

lpDS1ChanRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.7.2.1
This entry controls the addition and deletion of lpDS1Chan components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1ChanRowStatusEntry

lpDS1ChanRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.7.2.1.1
A single entry in the table represents a single lpDS1Chan component.
OBJECT-TYPE    
  LpDS1ChanRowStatusEntry  

lpDS1ChanRowStatus 1.3.6.1.4.1.562.2.4.1.12.7.2.1.1.1
This variable is used as the basis for SNMP naming of lpDS1Chan components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

lpDS1ChanComponentName 1.3.6.1.4.1.562.2.4.1.12.7.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpDS1ChanStorageType 1.3.6.1.4.1.562.2.4.1.12.7.2.1.1.4
This variable represents the storage type value for the lpDS1Chan tables.
OBJECT-TYPE    
  StorageType  

lpDS1ChanIndex 1.3.6.1.4.1.562.2.4.1.12.7.2.1.1.10
This variable represents the index for the lpDS1Chan tables.
OBJECT-TYPE    
  Integer32 0..24  

lpDS1ChanTest 1.3.6.1.4.1.562.2.4.1.12.7.2.2
OBJECT IDENTIFIER    

lpDS1ChanTestRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.7.2.2.1
This entry controls the addition and deletion of lpDS1ChanTest components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1ChanTestRowStatusEntry

lpDS1ChanTestRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.7.2.2.1.1
A single entry in the table represents a single lpDS1ChanTest component.
OBJECT-TYPE    
  LpDS1ChanTestRowStatusEntry  

lpDS1ChanTestRowStatus 1.3.6.1.4.1.562.2.4.1.12.7.2.2.1.1.1
This variable is used as the basis for SNMP naming of lpDS1ChanTest components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpDS1ChanTestComponentName 1.3.6.1.4.1.562.2.4.1.12.7.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpDS1ChanTestStorageType 1.3.6.1.4.1.562.2.4.1.12.7.2.2.1.1.4
This variable represents the storage type value for the lpDS1ChanTest tables.
OBJECT-TYPE    
  StorageType  

lpDS1ChanTestIndex 1.3.6.1.4.1.562.2.4.1.12.7.2.2.1.1.10
This variable represents the index for the lpDS1ChanTest tables.
OBJECT-TYPE    
  NonReplicated  

lpDS1ChanTestStateTable 1.3.6.1.4.1.562.2.4.1.12.7.2.2.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1ChanTestStateEntry

lpDS1ChanTestStateEntry 1.3.6.1.4.1.562.2.4.1.12.7.2.2.10.1
An entry in the lpDS1ChanTestStateTable.
OBJECT-TYPE    
  LpDS1ChanTestStateEntry  

lpDS1ChanTestAdminState 1.3.6.1.4.1.562.2.4.1.12.7.2.2.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpDS1ChanTestOperationalState 1.3.6.1.4.1.562.2.4.1.12.7.2.2.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpDS1ChanTestUsageState 1.3.6.1.4.1.562.2.4.1.12.7.2.2.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpDS1ChanTestSetupTable 1.3.6.1.4.1.562.2.4.1.12.7.2.2.11
This group contains all of the operational data for a Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1ChanTestSetupEntry

lpDS1ChanTestSetupEntry 1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1
An entry in the lpDS1ChanTestSetupTable.
OBJECT-TYPE    
  LpDS1ChanTestSetupEntry  

lpDS1ChanTestPurpose 1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.1
This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
OBJECT-TYPE    
  AsciiString SIZE(0..40)  

lpDS1ChanTestType 1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.2
This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
OBJECT-TYPE    
  INTEGER card(0), manual(1), localLoop(2), remoteLoop(3), externalLoop(4), payloadLoop(5), remoteLoopThisTrib(6), v54RemoteLoop(7), pn127RemoteLoop(8)  

lpDS1ChanTestFrmSize 1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.3
This attribute defines the size of the test data frames in number of bytes.
OBJECT-TYPE    
  Unsigned32 4..4096  

lpDS1ChanTestFrmPatternType 1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.4
This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
OBJECT-TYPE    
  INTEGER ccitt32kBitPattern(0), ccitt8MBitPattern(1), customizedPattern(2)  

lpDS1ChanTestCustomizedPattern 1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.5
This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
OBJECT-TYPE    
  Hex 0..4294967295  

lpDS1ChanTestDataStartDelay 1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.6
This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
OBJECT-TYPE    
  Unsigned32 0..1814400  

lpDS1ChanTestDisplayInterval 1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.7
This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
OBJECT-TYPE    
  Unsigned32 0..30240  

lpDS1ChanTestDuration 1.3.6.1.4.1.562.2.4.1.12.7.2.2.11.1.8
This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
OBJECT-TYPE    
  Unsigned32 1..30240  

lpDS1ChanTestResultsTable 1.3.6.1.4.1.562.2.4.1.12.7.2.2.12
This group contains all the statistics related attributes of the Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1ChanTestResultsEntry

lpDS1ChanTestResultsEntry 1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1
An entry in the lpDS1ChanTestResultsTable.
OBJECT-TYPE    
  LpDS1ChanTestResultsEntry  

lpDS1ChanTestElapsedTime 1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.1
This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
OBJECT-TYPE    
  Counter32  

lpDS1ChanTestTimeRemaining 1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.2
This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

lpDS1ChanTestCauseOfTermination 1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.3
This attribute records the reason the test is terminated.
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4), hardwareReconfigured(5)  

lpDS1ChanTestBitsTx 1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.4
This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpDS1ChanTestBytesTx 1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.5
This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpDS1ChanTestFrmTx 1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.6
This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpDS1ChanTestBitsRx 1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.7
This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpDS1ChanTestBytesRx 1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.8
This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpDS1ChanTestFrmRx 1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.9
This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpDS1ChanTestErroredFrmRx 1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.10
This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
OBJECT-TYPE    
  PassportCounter64  

lpDS1ChanTestBitErrorRate 1.3.6.1.4.1.562.2.4.1.12.7.2.2.12.1.11
This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
OBJECT-TYPE    
  AsciiString SIZE(5)  

lpDS1ChanCell 1.3.6.1.4.1.562.2.4.1.12.7.2.3
OBJECT IDENTIFIER    

lpDS1ChanCellRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.7.2.3.1
This entry controls the addition and deletion of lpDS1ChanCell components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1ChanCellRowStatusEntry

lpDS1ChanCellRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.7.2.3.1.1
A single entry in the table represents a single lpDS1ChanCell component.
OBJECT-TYPE    
  LpDS1ChanCellRowStatusEntry  

lpDS1ChanCellRowStatus 1.3.6.1.4.1.562.2.4.1.12.7.2.3.1.1.1
This variable is used as the basis for SNMP naming of lpDS1ChanCell components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

lpDS1ChanCellComponentName 1.3.6.1.4.1.562.2.4.1.12.7.2.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpDS1ChanCellStorageType 1.3.6.1.4.1.562.2.4.1.12.7.2.3.1.1.4
This variable represents the storage type value for the lpDS1ChanCell tables.
OBJECT-TYPE    
  StorageType  

lpDS1ChanCellIndex 1.3.6.1.4.1.562.2.4.1.12.7.2.3.1.1.10
This variable represents the index for the lpDS1ChanCell tables.
OBJECT-TYPE    
  NonReplicated  

lpDS1ChanCellProvTable 1.3.6.1.4.1.562.2.4.1.12.7.2.3.10
This group contains the provisioning attributes for the AtmCell component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1ChanCellProvEntry

lpDS1ChanCellProvEntry 1.3.6.1.4.1.562.2.4.1.12.7.2.3.10.1
An entry in the lpDS1ChanCellProvTable.
OBJECT-TYPE    
  LpDS1ChanCellProvEntry  

lpDS1ChanCellAlarmActDelay 1.3.6.1.4.1.562.2.4.1.12.7.2.3.10.1.1
This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
OBJECT-TYPE    
  Unsigned32 0..2000  

lpDS1ChanCellScrambleCellPayload 1.3.6.1.4.1.562.2.4.1.12.7.2.3.10.1.2
Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

lpDS1ChanCellCorrectSingleBitHeaderErrors 1.3.6.1.4.1.562.2.4.1.12.7.2.3.10.1.3
This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

lpDS1ChanCellOperTable 1.3.6.1.4.1.562.2.4.1.12.7.2.3.11
This group contains the common operational attributes for the AtmCell component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1ChanCellOperEntry

lpDS1ChanCellOperEntry 1.3.6.1.4.1.562.2.4.1.12.7.2.3.11.1
An entry in the lpDS1ChanCellOperTable.
OBJECT-TYPE    
  LpDS1ChanCellOperEntry  

lpDS1ChanCellLcdAlarm 1.3.6.1.4.1.562.2.4.1.12.7.2.3.11.1.1
This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpDS1ChanCellStatsTable 1.3.6.1.4.1.562.2.4.1.12.7.2.3.12
This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1ChanCellStatsEntry

lpDS1ChanCellStatsEntry 1.3.6.1.4.1.562.2.4.1.12.7.2.3.12.1
An entry in the lpDS1ChanCellStatsTable.
OBJECT-TYPE    
  LpDS1ChanCellStatsEntry  

lpDS1ChanCellUncorrectableHecErrors 1.3.6.1.4.1.562.2.4.1.12.7.2.3.12.1.1
This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
OBJECT-TYPE    
  Counter32  

lpDS1ChanCellSevErroredSec 1.3.6.1.4.1.562.2.4.1.12.7.2.3.12.1.2
This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
OBJECT-TYPE    
  Counter32  

lpDS1ChanCellReceiveCellUtilization 1.3.6.1.4.1.562.2.4.1.12.7.2.3.12.1.3
This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  Gauge32 0..100  

lpDS1ChanCellTransmitCellUtilization 1.3.6.1.4.1.562.2.4.1.12.7.2.3.12.1.4
This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  Gauge32 0..100  

lpDS1ChanCellCorrectableHeaderErrors 1.3.6.1.4.1.562.2.4.1.12.7.2.3.12.1.5
This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
OBJECT-TYPE    
  Counter32  

lpDS1ChanTc 1.3.6.1.4.1.562.2.4.1.12.7.2.4
OBJECT IDENTIFIER    

lpDS1ChanTcRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.7.2.4.1
This entry controls the addition and deletion of lpDS1ChanTc components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1ChanTcRowStatusEntry

lpDS1ChanTcRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.7.2.4.1.1
A single entry in the table represents a single lpDS1ChanTc component.
OBJECT-TYPE    
  LpDS1ChanTcRowStatusEntry  

lpDS1ChanTcRowStatus 1.3.6.1.4.1.562.2.4.1.12.7.2.4.1.1.1
This variable is used as the basis for SNMP naming of lpDS1ChanTc components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

lpDS1ChanTcComponentName 1.3.6.1.4.1.562.2.4.1.12.7.2.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpDS1ChanTcStorageType 1.3.6.1.4.1.562.2.4.1.12.7.2.4.1.1.4
This variable represents the storage type value for the lpDS1ChanTc tables.
OBJECT-TYPE    
  StorageType  

lpDS1ChanTcIndex 1.3.6.1.4.1.562.2.4.1.12.7.2.4.1.1.10
This variable represents the index for the lpDS1ChanTc tables.
OBJECT-TYPE    
  NonReplicated  

lpDS1ChanTcProvTable 1.3.6.1.4.1.562.2.4.1.12.7.2.4.10
This group contains all specific provisioning data for a Tc component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1ChanTcProvEntry

lpDS1ChanTcProvEntry 1.3.6.1.4.1.562.2.4.1.12.7.2.4.10.1
An entry in the lpDS1ChanTcProvTable.
OBJECT-TYPE    
  LpDS1ChanTcProvEntry  

lpDS1ChanTcReplacementData 1.3.6.1.4.1.562.2.4.1.12.7.2.4.10.1.1
This attribute specifies the trunk conditioning data byte to be substituted into the timeslots defined by the Chan component under fault conditions. replacementData can be set to any two digit hexadecimal number. The following are recommended values: DS1 MUX Out Of Service Code = 0x1A E1 MUX Out Of Service Code = 0xFF
OBJECT-TYPE    
  Hex 0..255  

lpDS1ChanTcSignalOneDuration 1.3.6.1.4.1.562.2.4.1.12.7.2.4.10.1.2
This attribute specifies the time duration in seconds for which signalOne is substituted into the appropriate signaling bits, when a lineType that uses CAS has been defined. When signalOneDuration has expired signalTwo is substituted into the appropriate signaling bits. If signalOneDuration is set to zero then only signalTwo is substituted into the appropriate signaling bits during error conditions. signalOneDuration can be set to any integer value from 0 to 60 seconds.
OBJECT-TYPE    
  Unsigned32 0..60  

lpDS1ChanTcOpTable 1.3.6.1.4.1.562.2.4.1.12.7.2.4.11
This group contains all specific operational data for a Tc component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1ChanTcOpEntry

lpDS1ChanTcOpEntry 1.3.6.1.4.1.562.2.4.1.12.7.2.4.11.1
An entry in the lpDS1ChanTcOpTable.
OBJECT-TYPE    
  LpDS1ChanTcOpEntry  

lpDS1ChanTcIngressConditioning 1.3.6.1.4.1.562.2.4.1.12.7.2.4.11.1.1
This attribute indicates the status of locally generated trunk conditioning towards the ATM network. When trunk conditioning is being locally generated towards the ATM network, ingressConditioning is set to on. When trunk conditioning is not being locally generated towards the ATM network, ingressConditioning is set to off. Trunk conditioning is transmitted towards the ATM network under the following conditions: lossOfSignal (LOS) lossOfFrame (LOF) remoteAlarmIndication (RAI) alarmIndicationSignal (AIS) bufferUnderflow (BU) and in addition for E1: lossOfMultiframe (LOMF) receiveMultiframeRemoteAlarmIndication (RMRAI)
OBJECT-TYPE    
  INTEGER off(0), on(1)  

lpDS1ChanTcEgressConditioning 1.3.6.1.4.1.562.2.4.1.12.7.2.4.11.1.2
This attribute indicates the status of locally generated trunk conditioning towards the PDH line. When trunk conditioning is being locally generated towards the PDH line, egressConditioning is set to on. When trunk conditioning is not being locally generated towards the PDH line, egressConditioning is set to off. Trunk conditioning is transmitted towards the PDH line under the following conditions: bufferUnderflow (BU) AAL1 protocol errors.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

lpDS1ChanTcSigOneTable 1.3.6.1.4.1.562.2.4.1.12.7.2.4.398
This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted for the duration provisioned in signalOneDuration when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1ChanTcSigOneEntry

lpDS1ChanTcSigOneEntry 1.3.6.1.4.1.562.2.4.1.12.7.2.4.398.1
An entry in the lpDS1ChanTcSigOneTable.
OBJECT-TYPE    
  LpDS1ChanTcSigOneEntry  

lpDS1ChanTcSigOneIndex 1.3.6.1.4.1.562.2.4.1.12.7.2.4.398.1.1
This variable represents the lpDS1ChanTcSigOneTable specific index for the lpDS1ChanTcSigOneTable.
OBJECT-TYPE    
  INTEGER d(0), c(1), b(2), a(3)  

lpDS1ChanTcSigOneValue 1.3.6.1.4.1.562.2.4.1.12.7.2.4.398.1.2
This variable represents an individual value for the lpDS1ChanTcSigOneTable.
OBJECT-TYPE    
  Unsigned32 0..1  

lpDS1ChanTcSigTwoTable 1.3.6.1.4.1.562.2.4.1.12.7.2.4.399
This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted after the duration provisioned in signalOneDuration has expired and when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1ChanTcSigTwoEntry

lpDS1ChanTcSigTwoEntry 1.3.6.1.4.1.562.2.4.1.12.7.2.4.399.1
An entry in the lpDS1ChanTcSigTwoTable.
OBJECT-TYPE    
  LpDS1ChanTcSigTwoEntry  

lpDS1ChanTcSigTwoIndex 1.3.6.1.4.1.562.2.4.1.12.7.2.4.399.1.1
This variable represents the lpDS1ChanTcSigTwoTable specific index for the lpDS1ChanTcSigTwoTable.
OBJECT-TYPE    
  INTEGER d(0), c(1), b(2), a(3)  

lpDS1ChanTcSigTwoValue 1.3.6.1.4.1.562.2.4.1.12.7.2.4.399.1.2
This variable represents an individual value for the lpDS1ChanTcSigTwoTable.
OBJECT-TYPE    
  Unsigned32 0..1  

lpDS1ChanProvTable 1.3.6.1.4.1.562.2.4.1.12.7.2.10
This group contains all of the provisional data for a Channel component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1ChanProvEntry

lpDS1ChanProvEntry 1.3.6.1.4.1.562.2.4.1.12.7.2.10.1
An entry in the lpDS1ChanProvTable.
OBJECT-TYPE    
  LpDS1ChanProvEntry  

lpDS1ChanTimeslots 1.3.6.1.4.1.562.2.4.1.12.7.2.10.1.1
This attribute contains the list of timeslots that are used by the Channel component. Valid numbers are 1-24 for a Channel used by a DS1 component, and 1-31 for a Channel used by an E1 component. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) n29(29) n30(30) n31(31)
OBJECT-TYPE    
  OCTET STRING SIZE(4)  

lpDS1ChanTimeslotDataRate 1.3.6.1.4.1.562.2.4.1.12.7.2.10.1.2
This attribute selects the data rate of the timeslots in a channel of a DS1 component. For E1, the data rate of the timeslots will always be 64kbit/s regardless of this attribute. When doNotOverride is selected for a channel on a DS1, the data rate of the channel's timeslots are dependent on the zeroCoding selection of the DS1 component. If the zeroCoding is B8ZS (where supported on the FP) or none, the timeslot's data rate will be 64kbit/s. If the zeroCoding option is bit7Stuffing, the data rate of a timeslot will be 56kbit/s. When 56kbit/s is selected for a channel on a DS1, the least significant bit of each timeslot of this Channel will always be set to 1 and not used for data. The data rate for the timeslots of this channel is therefore restricted to 56kbit/s. One application of this attribute is to allow a DS1 line to support mixing channels that originate from lines that use different zeroCoding schemes.
OBJECT-TYPE    
  INTEGER n56k(0), doNotOverride(1)  

lpDS1ChanApplicationFramerName 1.3.6.1.4.1.562.2.4.1.12.7.2.10.1.3
This attribute defines the link to the software stack. It defines which application is running on top of this hardware component.
OBJECT-TYPE    
  Link  

lpDS1ChanCidDataTable 1.3.6.1.4.1.562.2.4.1.12.7.2.11
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1ChanCidDataEntry

lpDS1ChanCidDataEntry 1.3.6.1.4.1.562.2.4.1.12.7.2.11.1
An entry in the lpDS1ChanCidDataTable.
OBJECT-TYPE    
  LpDS1ChanCidDataEntry  

lpDS1ChanCustomerIdentifier 1.3.6.1.4.1.562.2.4.1.12.7.2.11.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

lpDS1ChanIfEntryTable 1.3.6.1.4.1.562.2.4.1.12.7.2.12
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1ChanIfEntryEntry

lpDS1ChanIfEntryEntry 1.3.6.1.4.1.562.2.4.1.12.7.2.12.1
An entry in the lpDS1ChanIfEntryTable.
OBJECT-TYPE    
  LpDS1ChanIfEntryEntry  

lpDS1ChanIfAdminStatus 1.3.6.1.4.1.562.2.4.1.12.7.2.12.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpDS1ChanIfIndex 1.3.6.1.4.1.562.2.4.1.12.7.2.12.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

lpDS1ChanOperStatusTable 1.3.6.1.4.1.562.2.4.1.12.7.2.13
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1ChanOperStatusEntry

lpDS1ChanOperStatusEntry 1.3.6.1.4.1.562.2.4.1.12.7.2.13.1
An entry in the lpDS1ChanOperStatusTable.
OBJECT-TYPE    
  LpDS1ChanOperStatusEntry  

lpDS1ChanSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.12.7.2.13.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpDS1ChanStateTable 1.3.6.1.4.1.562.2.4.1.12.7.2.14
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1ChanStateEntry

lpDS1ChanStateEntry 1.3.6.1.4.1.562.2.4.1.12.7.2.14.1
An entry in the lpDS1ChanStateTable.
OBJECT-TYPE    
  LpDS1ChanStateEntry  

lpDS1ChanAdminState 1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpDS1ChanOperationalState 1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpDS1ChanUsageState 1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpDS1ChanAvailabilityStatus 1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

lpDS1ChanProceduralStatus 1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpDS1ChanControlStatus 1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpDS1ChanAlarmStatus 1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpDS1ChanStandbyStatus 1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

lpDS1ChanUnknownStatus 1.3.6.1.4.1.562.2.4.1.12.7.2.14.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

lpDS1ChanOperTable 1.3.6.1.4.1.562.2.4.1.12.7.2.15
This group contains all of the operational data for a Channel component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1ChanOperEntry

lpDS1ChanOperEntry 1.3.6.1.4.1.562.2.4.1.12.7.2.15.1
An entry in the lpDS1ChanOperTable.
OBJECT-TYPE    
  LpDS1ChanOperEntry  

lpDS1ChanActualChannelSpeed 1.3.6.1.4.1.562.2.4.1.12.7.2.15.1.1
This attribute displays the measured link speed of the Channel component.
OBJECT-TYPE    
  Gauge32 0..4294967295  

lpDS1ChanAdminInfoTable 1.3.6.1.4.1.562.2.4.1.12.7.2.16
This group contains the attributes pertaining to the vendor of the equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1ChanAdminInfoEntry

lpDS1ChanAdminInfoEntry 1.3.6.1.4.1.562.2.4.1.12.7.2.16.1
An entry in the lpDS1ChanAdminInfoTable.
OBJECT-TYPE    
  LpDS1ChanAdminInfoEntry  

lpDS1ChanVendor 1.3.6.1.4.1.562.2.4.1.12.7.2.16.1.1
This is the name of the vendor supplying the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..20)  

lpDS1ChanCommentText 1.3.6.1.4.1.562.2.4.1.12.7.2.16.1.2
Any miscellaneous text about the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..60)  

lpDS1Test 1.3.6.1.4.1.562.2.4.1.12.7.3
OBJECT IDENTIFIER    

lpDS1TestRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.7.3.1
This entry controls the addition and deletion of lpDS1Test components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1TestRowStatusEntry

lpDS1TestRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.7.3.1.1
A single entry in the table represents a single lpDS1Test component.
OBJECT-TYPE    
  LpDS1TestRowStatusEntry  

lpDS1TestRowStatus 1.3.6.1.4.1.562.2.4.1.12.7.3.1.1.1
This variable is used as the basis for SNMP naming of lpDS1Test components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpDS1TestComponentName 1.3.6.1.4.1.562.2.4.1.12.7.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpDS1TestStorageType 1.3.6.1.4.1.562.2.4.1.12.7.3.1.1.4
This variable represents the storage type value for the lpDS1Test tables.
OBJECT-TYPE    
  StorageType  

lpDS1TestIndex 1.3.6.1.4.1.562.2.4.1.12.7.3.1.1.10
This variable represents the index for the lpDS1Test tables.
OBJECT-TYPE    
  NonReplicated  

lpDS1TestStateTable 1.3.6.1.4.1.562.2.4.1.12.7.3.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1TestStateEntry

lpDS1TestStateEntry 1.3.6.1.4.1.562.2.4.1.12.7.3.10.1
An entry in the lpDS1TestStateTable.
OBJECT-TYPE    
  LpDS1TestStateEntry  

lpDS1TestAdminState 1.3.6.1.4.1.562.2.4.1.12.7.3.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpDS1TestOperationalState 1.3.6.1.4.1.562.2.4.1.12.7.3.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpDS1TestUsageState 1.3.6.1.4.1.562.2.4.1.12.7.3.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpDS1TestSetupTable 1.3.6.1.4.1.562.2.4.1.12.7.3.11
This group contains all of the operational data for a Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1TestSetupEntry

lpDS1TestSetupEntry 1.3.6.1.4.1.562.2.4.1.12.7.3.11.1
An entry in the lpDS1TestSetupTable.
OBJECT-TYPE    
  LpDS1TestSetupEntry  

lpDS1TestPurpose 1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.1
This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
OBJECT-TYPE    
  AsciiString SIZE(0..40)  

lpDS1TestType 1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.2
This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
OBJECT-TYPE    
  INTEGER card(0), manual(1), localLoop(2), remoteLoop(3), externalLoop(4), payloadLoop(5), remoteLoopThisTrib(6), v54RemoteLoop(7), pn127RemoteLoop(8)  

lpDS1TestFrmSize 1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.3
This attribute defines the size of the test data frames in number of bytes.
OBJECT-TYPE    
  Unsigned32 4..4096  

lpDS1TestFrmPatternType 1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.4
This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
OBJECT-TYPE    
  INTEGER ccitt32kBitPattern(0), ccitt8MBitPattern(1), customizedPattern(2)  

lpDS1TestCustomizedPattern 1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.5
This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
OBJECT-TYPE    
  Hex 0..4294967295  

lpDS1TestDataStartDelay 1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.6
This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
OBJECT-TYPE    
  Unsigned32 0..1814400  

lpDS1TestDisplayInterval 1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.7
This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
OBJECT-TYPE    
  Unsigned32 0..30240  

lpDS1TestDuration 1.3.6.1.4.1.562.2.4.1.12.7.3.11.1.8
This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
OBJECT-TYPE    
  Unsigned32 1..30240  

lpDS1TestResultsTable 1.3.6.1.4.1.562.2.4.1.12.7.3.12
This group contains all the statistics related attributes of the Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1TestResultsEntry

lpDS1TestResultsEntry 1.3.6.1.4.1.562.2.4.1.12.7.3.12.1
An entry in the lpDS1TestResultsTable.
OBJECT-TYPE    
  LpDS1TestResultsEntry  

lpDS1TestElapsedTime 1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.1
This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
OBJECT-TYPE    
  Counter32  

lpDS1TestTimeRemaining 1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.2
This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

lpDS1TestCauseOfTermination 1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.3
This attribute records the reason the test is terminated.
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4), hardwareReconfigured(5)  

lpDS1TestBitsTx 1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.4
This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpDS1TestBytesTx 1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.5
This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpDS1TestFrmTx 1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.6
This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpDS1TestBitsRx 1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.7
This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpDS1TestBytesRx 1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.8
This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpDS1TestFrmRx 1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.9
This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpDS1TestErroredFrmRx 1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.10
This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
OBJECT-TYPE    
  PassportCounter64  

lpDS1TestBitErrorRate 1.3.6.1.4.1.562.2.4.1.12.7.3.12.1.11
This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
OBJECT-TYPE    
  AsciiString SIZE(5)  

lpDS1Dsp 1.3.6.1.4.1.562.2.4.1.12.7.4
OBJECT IDENTIFIER    

lpDS1DspRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.7.4.1
This entry controls the addition and deletion of lpDS1Dsp components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1DspRowStatusEntry

lpDS1DspRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.7.4.1.1
A single entry in the table represents a single lpDS1Dsp component.
OBJECT-TYPE    
  LpDS1DspRowStatusEntry  

lpDS1DspRowStatus 1.3.6.1.4.1.562.2.4.1.12.7.4.1.1.1
This variable is used as the basis for SNMP naming of lpDS1Dsp components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpDS1DspComponentName 1.3.6.1.4.1.562.2.4.1.12.7.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpDS1DspStorageType 1.3.6.1.4.1.562.2.4.1.12.7.4.1.1.4
This variable represents the storage type value for the lpDS1Dsp tables.
OBJECT-TYPE    
  StorageType  

lpDS1DspIndex 1.3.6.1.4.1.562.2.4.1.12.7.4.1.1.10
This variable represents the index for the lpDS1Dsp tables.
OBJECT-TYPE    
  NonReplicated  

lpDS1Audio 1.3.6.1.4.1.562.2.4.1.12.7.5
OBJECT IDENTIFIER    

lpDS1AudioRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.7.5.1
This entry controls the addition and deletion of lpDS1Audio components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1AudioRowStatusEntry

lpDS1AudioRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.7.5.1.1
A single entry in the table represents a single lpDS1Audio component.
OBJECT-TYPE    
  LpDS1AudioRowStatusEntry  

lpDS1AudioRowStatus 1.3.6.1.4.1.562.2.4.1.12.7.5.1.1.1
This variable is used as the basis for SNMP naming of lpDS1Audio components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpDS1AudioComponentName 1.3.6.1.4.1.562.2.4.1.12.7.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpDS1AudioStorageType 1.3.6.1.4.1.562.2.4.1.12.7.5.1.1.4
This variable represents the storage type value for the lpDS1Audio tables.
OBJECT-TYPE    
  StorageType  

lpDS1AudioIndex 1.3.6.1.4.1.562.2.4.1.12.7.5.1.1.10
This variable represents the index for the lpDS1Audio tables.
OBJECT-TYPE    
  NonReplicated  

lpDS1ProvTable 1.3.6.1.4.1.562.2.4.1.12.7.10
This group contains all of the provisioning data for a DS1 component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1ProvEntry

lpDS1ProvEntry 1.3.6.1.4.1.562.2.4.1.12.7.10.1
An entry in the lpDS1ProvTable.
OBJECT-TYPE    
  LpDS1ProvEntry  

lpDS1LineType 1.3.6.1.4.1.562.2.4.1.12.7.10.1.1
This attribute defines the framing of the DS1 line. d4 defines a framing pattern of 12 frames per multiframe. esf defines a framing pattern of 24 frames per multiframe. d4Cas defines a framing pattern of 12 frames per multiframe with channel associated signalling. esfCas defines a framing pattern of 24 frames per multiframe with channel associated signalling. unframed defines an unknown framing pattern for clear channels. For cell-based cards only the default option esf is permitted.
OBJECT-TYPE    
  INTEGER d4(0), esf(1), d4Cas(4), esfCas(5), unframed(6)  

lpDS1ZeroCoding 1.3.6.1.4.1.562.2.4.1.12.7.10.1.2
This attribute defines the zero encoding on the DS1 line. bit7Stuffing sets bit 7 of every timeslot to a one to guarantee ones's density. This reduces the available bandwidth of the channel by 1/8. b8zs substitutes a pattern of bipolar violations if more than 7 zeros in a row are to be transported. ami specifies Alternate Mark Inversion, in which successive marks (ones) alternate between positive and negative polarity voltage signals, and spaces (zeros) are sent as a zero amplitude signal. When zeroCoding is set to ami and lineType is set to d4, it is recommended that raiAlarmType be set to SBit in order to avoid possible mimic RAI alarm. For cell-based cards only the default value b8zs is permitted.
OBJECT-TYPE    
  INTEGER bit7Stuffing(0), b8zs(1), ami(2)  

lpDS1ClockingSource 1.3.6.1.4.1.562.2.4.1.12.7.10.1.3
This attribute defines the source of the transmit clock for the DS1 line. When local is selected, the crystal on the port generates the clocking for the line. When line is selected, the port synchronizes to the clock from the facility. When module is selected, the ports clock synchronizes to the clock provided by the oscillator on the active CP. When otherPort is selected, the port synchronizes to the port with a clocking source of line. When srtsMode is selected, the port synchronization is taken from the SRTS (Synchronous Residual Time-Stamp) bits extracted from the AAL1 cells. This option is only available for unstructured AAL1 data services when the other ports on the card have their clocking source set to module. If the NetworkSynchronization (NS) component is present the default value of this attribute will be module otherwise it will default to local. Note that 3pDS1Atm cards have one common clock source for all ports and do not support the line clock source; all three ports must have the same value, either local or module.
OBJECT-TYPE    
  INTEGER local(0), line(1), module(2), otherPort(3), srtsMode(4)  

lpDS1RaiAlarmType 1.3.6.1.4.1.562.2.4.1.12.7.10.1.4
This attribute defines the method of sending a RAI (Remote Alarm Indication) alarm on a DS1 line. When SBit is selected, RAI alarm is sent by setting the S bit in frame 12. When Bit2 is selected, RAI alarm is sent by setting bit 2 in all timeslots to 0. When fdl is selected, RAI alarm is sent by a repeating pattern of 00 hex and FF hex on the FDL link. Note that for lineType of d4, only the SBit and the Bit2 methods are applicable. Whereas for lineType of esf, only the Bit2 and the fdl methods are applicable. SBit method is recommended if lineType is set to d4 and zeroCoding is set to ami. This will help to avoid potential mimic RAI alarm when 1's density is too low in the data transmitted. For cell-based cards only the default value fdl is permitted.
OBJECT-TYPE    
  INTEGER sBit(0), bit2(1), fdl(2)  

lpDS1LineLength 1.3.6.1.4.1.562.2.4.1.12.7.10.1.5
This attribute defines the line length (in feet) for equalization calculations for the DS1 line. The value ranges between 0-655. For 8pDS1Atm cards the actual value used for equalization is rounded up to the nearest 110 feet; for all other card types the actual value used is rounded to the nearest 50 feet.
OBJECT-TYPE    
  Unsigned32 0..655  

lpDS1CidDataTable 1.3.6.1.4.1.562.2.4.1.12.7.11
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1CidDataEntry

lpDS1CidDataEntry 1.3.6.1.4.1.562.2.4.1.12.7.11.1
An entry in the lpDS1CidDataTable.
OBJECT-TYPE    
  LpDS1CidDataEntry  

lpDS1CustomerIdentifier 1.3.6.1.4.1.562.2.4.1.12.7.11.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

lpDS1AdminInfoTable 1.3.6.1.4.1.562.2.4.1.12.7.12
This group contains the attributes pertaining to the vendor of the equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1AdminInfoEntry

lpDS1AdminInfoEntry 1.3.6.1.4.1.562.2.4.1.12.7.12.1
An entry in the lpDS1AdminInfoTable.
OBJECT-TYPE    
  LpDS1AdminInfoEntry  

lpDS1Vendor 1.3.6.1.4.1.562.2.4.1.12.7.12.1.1
This is the name of the vendor supplying the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..20)  

lpDS1CommentText 1.3.6.1.4.1.562.2.4.1.12.7.12.1.2
Any miscellaneous text about the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..60)  

lpDS1IfEntryTable 1.3.6.1.4.1.562.2.4.1.12.7.13
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1IfEntryEntry

lpDS1IfEntryEntry 1.3.6.1.4.1.562.2.4.1.12.7.13.1
An entry in the lpDS1IfEntryTable.
OBJECT-TYPE    
  LpDS1IfEntryEntry  

lpDS1IfAdminStatus 1.3.6.1.4.1.562.2.4.1.12.7.13.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpDS1IfIndex 1.3.6.1.4.1.562.2.4.1.12.7.13.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

lpDS1OperStatusTable 1.3.6.1.4.1.562.2.4.1.12.7.14
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1OperStatusEntry

lpDS1OperStatusEntry 1.3.6.1.4.1.562.2.4.1.12.7.14.1
An entry in the lpDS1OperStatusTable.
OBJECT-TYPE    
  LpDS1OperStatusEntry  

lpDS1SnmpOperStatus 1.3.6.1.4.1.562.2.4.1.12.7.14.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpDS1StateTable 1.3.6.1.4.1.562.2.4.1.12.7.15
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1StateEntry

lpDS1StateEntry 1.3.6.1.4.1.562.2.4.1.12.7.15.1
An entry in the lpDS1StateTable.
OBJECT-TYPE    
  LpDS1StateEntry  

lpDS1AdminState 1.3.6.1.4.1.562.2.4.1.12.7.15.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpDS1OperationalState 1.3.6.1.4.1.562.2.4.1.12.7.15.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpDS1UsageState 1.3.6.1.4.1.562.2.4.1.12.7.15.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpDS1AvailabilityStatus 1.3.6.1.4.1.562.2.4.1.12.7.15.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

lpDS1ProceduralStatus 1.3.6.1.4.1.562.2.4.1.12.7.15.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpDS1ControlStatus 1.3.6.1.4.1.562.2.4.1.12.7.15.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpDS1AlarmStatus 1.3.6.1.4.1.562.2.4.1.12.7.15.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpDS1StandbyStatus 1.3.6.1.4.1.562.2.4.1.12.7.15.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

lpDS1UnknownStatus 1.3.6.1.4.1.562.2.4.1.12.7.15.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

lpDS1OperTable 1.3.6.1.4.1.562.2.4.1.12.7.16
This group contains the common operational data for a component in a digital hierarchy interface.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1OperEntry

lpDS1OperEntry 1.3.6.1.4.1.562.2.4.1.12.7.16.1
An entry in the lpDS1OperTable.
OBJECT-TYPE    
  LpDS1OperEntry  

lpDS1LosAlarm 1.3.6.1.4.1.562.2.4.1.12.7.16.1.1
This attribute displays whether a LOS (Loss of Signal) alarm state has been entered. A LOS alarm is declared after LOS defects have been observed and accumulated for a period of 2 seconds +/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). A LOS defect is detected upon observing all zeros for 150 ms (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: upon observing 175 +/- 75 pulse positions with no pulses of either positive or negative polarity). If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOS alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOS alarm state. The LOS alarm state is cleared when LOS defects are absent for 10 seconds +/- 0.5 seconds.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpDS1RxAisAlarm 1.3.6.1.4.1.562.2.4.1.12.7.16.1.2
This attribute displays whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/ - 0.5 seconds. An AIS defect is detected after having received less than 3 zeros in a 2048 bit period (for 8pDS1Atm cards: when both an Out Of Frame condition exists and a 1's density of at least 99.9% is present for a time T, where 3 ms T 75 ms; for 8pE1Atm cards: when both an Out Of Frame condition exists and fewer than three 0's have been received in 512 bit periods). If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled for the duration of an AIS alarm state. The AIS alarm state is cleared when AIS defects are absent for 10 seconds +/- 0.5 seconds.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpDS1LofAlarm 1.3.6.1.4.1.562.2.4.1.12.7.16.1.3
This attribute displays whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defects (for DS1: 2 out of 5 framing bits in error; for E1: 3 consecutive frame alignment patterns in error) have been detected for 3 seconds +/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOF alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOF alarm state The condition is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpDS1RxRaiAlarm 1.3.6.1.4.1.562.2.4.1.12.7.16.1.4
This attribute displays whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered when the RAI defect indicator has been observed and accumulated for 3.5 seconds +/- 0.5 seconds. For 3pDS1Atm, and 8pDS1Atm cards: alarm is declared immediately upon observing the defect is present, with no integration time. For 3pE1Atm, and 8pE1Atm cards: alarm state is entered when the RAI defect indicator has been observed and accumulated for 2.5 seconds +/- 0.5 seconds. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The RAI alarm state is cleared when the RAI defect indicator has been absent for 10 seconds +/- 0.5 seconds (for 3pDS1Atm, and 8pDS1Atm cards: alarm is cleared immediately upon observing the defect is absent, with no integration time). The RAI alarm is usually an indication that the far end facility is unable to gain synchronization.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpDS1TxAisAlarm 1.3.6.1.4.1.562.2.4.1.12.7.16.1.5
This attribute displays whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transmitted when the port is in a locked state.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpDS1TxRaiAlarm 1.3.6.1.4.1.562.2.4.1.12.7.16.1.6
This attribute displays whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the port detects a LOF alarm condition (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: RAI is transmitted when the port detects a LOS, LOF, or AIS condition).
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpDS1StatsTable 1.3.6.1.4.1.562.2.4.1.12.7.17
This group contains the common statistical data for a component in a digital hierarchy interface.
OBJECT-TYPE    
  SEQUENCE OF  
    LpDS1StatsEntry

lpDS1StatsEntry 1.3.6.1.4.1.562.2.4.1.12.7.17.1
An entry in the lpDS1StatsTable.
OBJECT-TYPE    
  LpDS1StatsEntry  

lpDS1RunningTime 1.3.6.1.4.1.562.2.4.1.12.7.17.1.1
The number of seconds since the port component was activated.
OBJECT-TYPE    
  Counter32  

lpDS1ErrorFreeSec 1.3.6.1.4.1.562.2.4.1.12.7.17.1.2
The number of seconds that the port has been in an error free state.
OBJECT-TYPE    
  Counter32  

lpDS1ErroredSec 1.3.6.1.4.1.562.2.4.1.12.7.17.1.3
An errored second is declared when a second with one or more Code Violation Error events, or one or more Out Of Frame events occurs. A code violation error may be a CRC error or a BPV error. An Out Of Frame event occurs when 2 out of 5 framing bits are in error.
OBJECT-TYPE    
  Counter32  

lpDS1SevErroredSec 1.3.6.1.4.1.562.2.4.1.12.7.17.1.4
A severely errored second occurs when a second with 320 or more Code Violation Error events or one or more Out Of Frame events occurs.
OBJECT-TYPE    
  Counter32  

lpDS1SevErroredFrmSec 1.3.6.1.4.1.562.2.4.1.12.7.17.1.5
A severely errored framing second occurs when a second with one or more Out Of Frame events occurs.
OBJECT-TYPE    
  Counter32  

lpDS1UnavailSec 1.3.6.1.4.1.562.2.4.1.12.7.17.1.6
The total number of seconds that the interface is in an unavailable signal state. An unavailable signal state occurs at the onset of 10 consecutive Severely Errored Seconds. The state is cleared at the onset of 10 seconds with no Severely Errored Seconds.
OBJECT-TYPE    
  Counter32  

lpDS1BpvErrors 1.3.6.1.4.1.562.2.4.1.12.7.17.1.7
The current count of Bipolar Violations. A bipolar violation is an error in the alternate mark inversion pattern (AMI) on the line.
OBJECT-TYPE    
  Counter32  

lpDS1CrcErrors 1.3.6.1.4.1.562.2.4.1.12.7.17.1.8
If the interface is a DS1 line, it is the current count of CRC-6 errors. These will only be counted when the lineType is ESF. If the interface is an E1 line, it is the total number of CRC-4 errors. These will only be counted when crc4Mode is on.
OBJECT-TYPE    
  Counter32  

lpDS1FrmErrors 1.3.6.1.4.1.562.2.4.1.12.7.17.1.9
The current count of frame errors. A frame error is an error in the framing bits
OBJECT-TYPE    
  Counter32  

lpDS1LosStateChanges 1.3.6.1.4.1.562.2.4.1.12.7.17.1.10
The total number of times that the line lost signal.
OBJECT-TYPE    
  Counter32  

lpDS1SlipErrors 1.3.6.1.4.1.562.2.4.1.12.7.17.1.11
The total number of times that the line experienced a controlled frame slip. This attribute is incremented for ports on the voice cards (for example the 1pDS1V and the 1pE1V function processors) only.
OBJECT-TYPE    
  Counter32  

lpE1 1.3.6.1.4.1.562.2.4.1.12.8
OBJECT IDENTIFIER    

lpE1RowStatusTable 1.3.6.1.4.1.562.2.4.1.12.8.1
This entry controls the addition and deletion of lpE1 components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1RowStatusEntry

lpE1RowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.8.1.1
A single entry in the table represents a single lpE1 component.
OBJECT-TYPE    
  LpE1RowStatusEntry  

lpE1RowStatus 1.3.6.1.4.1.562.2.4.1.12.8.1.1.1
This variable is used as the basis for SNMP naming of lpE1 components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

lpE1ComponentName 1.3.6.1.4.1.562.2.4.1.12.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpE1StorageType 1.3.6.1.4.1.562.2.4.1.12.8.1.1.4
This variable represents the storage type value for the lpE1 tables.
OBJECT-TYPE    
  StorageType  

lpE1Index 1.3.6.1.4.1.562.2.4.1.12.8.1.1.10
This variable represents the index for the lpE1 tables.
OBJECT-TYPE    
  Integer32 0..32  

lpE1Chan 1.3.6.1.4.1.562.2.4.1.12.8.2
OBJECT IDENTIFIER    

lpE1ChanRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.8.2.1
This entry controls the addition and deletion of lpE1Chan components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1ChanRowStatusEntry

lpE1ChanRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.8.2.1.1
A single entry in the table represents a single lpE1Chan component.
OBJECT-TYPE    
  LpE1ChanRowStatusEntry  

lpE1ChanRowStatus 1.3.6.1.4.1.562.2.4.1.12.8.2.1.1.1
This variable is used as the basis for SNMP naming of lpE1Chan components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

lpE1ChanComponentName 1.3.6.1.4.1.562.2.4.1.12.8.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpE1ChanStorageType 1.3.6.1.4.1.562.2.4.1.12.8.2.1.1.4
This variable represents the storage type value for the lpE1Chan tables.
OBJECT-TYPE    
  StorageType  

lpE1ChanIndex 1.3.6.1.4.1.562.2.4.1.12.8.2.1.1.10
This variable represents the index for the lpE1Chan tables.
OBJECT-TYPE    
  Integer32 0..31  

lpE1ChanTest 1.3.6.1.4.1.562.2.4.1.12.8.2.2
OBJECT IDENTIFIER    

lpE1ChanTestRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.8.2.2.1
This entry controls the addition and deletion of lpE1ChanTest components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1ChanTestRowStatusEntry

lpE1ChanTestRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.8.2.2.1.1
A single entry in the table represents a single lpE1ChanTest component.
OBJECT-TYPE    
  LpE1ChanTestRowStatusEntry  

lpE1ChanTestRowStatus 1.3.6.1.4.1.562.2.4.1.12.8.2.2.1.1.1
This variable is used as the basis for SNMP naming of lpE1ChanTest components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpE1ChanTestComponentName 1.3.6.1.4.1.562.2.4.1.12.8.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpE1ChanTestStorageType 1.3.6.1.4.1.562.2.4.1.12.8.2.2.1.1.4
This variable represents the storage type value for the lpE1ChanTest tables.
OBJECT-TYPE    
  StorageType  

lpE1ChanTestIndex 1.3.6.1.4.1.562.2.4.1.12.8.2.2.1.1.10
This variable represents the index for the lpE1ChanTest tables.
OBJECT-TYPE    
  NonReplicated  

lpE1ChanTestStateTable 1.3.6.1.4.1.562.2.4.1.12.8.2.2.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1ChanTestStateEntry

lpE1ChanTestStateEntry 1.3.6.1.4.1.562.2.4.1.12.8.2.2.10.1
An entry in the lpE1ChanTestStateTable.
OBJECT-TYPE    
  LpE1ChanTestStateEntry  

lpE1ChanTestAdminState 1.3.6.1.4.1.562.2.4.1.12.8.2.2.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpE1ChanTestOperationalState 1.3.6.1.4.1.562.2.4.1.12.8.2.2.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpE1ChanTestUsageState 1.3.6.1.4.1.562.2.4.1.12.8.2.2.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpE1ChanTestSetupTable 1.3.6.1.4.1.562.2.4.1.12.8.2.2.11
This group contains all of the operational data for a Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1ChanTestSetupEntry

lpE1ChanTestSetupEntry 1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1
An entry in the lpE1ChanTestSetupTable.
OBJECT-TYPE    
  LpE1ChanTestSetupEntry  

lpE1ChanTestPurpose 1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.1
This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
OBJECT-TYPE    
  AsciiString SIZE(0..40)  

lpE1ChanTestType 1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.2
This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
OBJECT-TYPE    
  INTEGER card(0), manual(1), localLoop(2), remoteLoop(3), externalLoop(4), payloadLoop(5), remoteLoopThisTrib(6), v54RemoteLoop(7), pn127RemoteLoop(8)  

lpE1ChanTestFrmSize 1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.3
This attribute defines the size of the test data frames in number of bytes.
OBJECT-TYPE    
  Unsigned32 4..4096  

lpE1ChanTestFrmPatternType 1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.4
This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
OBJECT-TYPE    
  INTEGER ccitt32kBitPattern(0), ccitt8MBitPattern(1), customizedPattern(2)  

lpE1ChanTestCustomizedPattern 1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.5
This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
OBJECT-TYPE    
  Hex 0..4294967295  

lpE1ChanTestDataStartDelay 1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.6
This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
OBJECT-TYPE    
  Unsigned32 0..1814400  

lpE1ChanTestDisplayInterval 1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.7
This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
OBJECT-TYPE    
  Unsigned32 0..30240  

lpE1ChanTestDuration 1.3.6.1.4.1.562.2.4.1.12.8.2.2.11.1.8
This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
OBJECT-TYPE    
  Unsigned32 1..30240  

lpE1ChanTestResultsTable 1.3.6.1.4.1.562.2.4.1.12.8.2.2.12
This group contains all the statistics related attributes of the Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1ChanTestResultsEntry

lpE1ChanTestResultsEntry 1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1
An entry in the lpE1ChanTestResultsTable.
OBJECT-TYPE    
  LpE1ChanTestResultsEntry  

lpE1ChanTestElapsedTime 1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.1
This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
OBJECT-TYPE    
  Counter32  

lpE1ChanTestTimeRemaining 1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.2
This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

lpE1ChanTestCauseOfTermination 1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.3
This attribute records the reason the test is terminated.
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4), hardwareReconfigured(5)  

lpE1ChanTestBitsTx 1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.4
This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpE1ChanTestBytesTx 1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.5
This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpE1ChanTestFrmTx 1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.6
This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpE1ChanTestBitsRx 1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.7
This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpE1ChanTestBytesRx 1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.8
This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpE1ChanTestFrmRx 1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.9
This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpE1ChanTestErroredFrmRx 1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.10
This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
OBJECT-TYPE    
  PassportCounter64  

lpE1ChanTestBitErrorRate 1.3.6.1.4.1.562.2.4.1.12.8.2.2.12.1.11
This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
OBJECT-TYPE    
  AsciiString SIZE(5)  

lpE1ChanCell 1.3.6.1.4.1.562.2.4.1.12.8.2.3
OBJECT IDENTIFIER    

lpE1ChanCellRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.8.2.3.1
This entry controls the addition and deletion of lpE1ChanCell components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1ChanCellRowStatusEntry

lpE1ChanCellRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.8.2.3.1.1
A single entry in the table represents a single lpE1ChanCell component.
OBJECT-TYPE    
  LpE1ChanCellRowStatusEntry  

lpE1ChanCellRowStatus 1.3.6.1.4.1.562.2.4.1.12.8.2.3.1.1.1
This variable is used as the basis for SNMP naming of lpE1ChanCell components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

lpE1ChanCellComponentName 1.3.6.1.4.1.562.2.4.1.12.8.2.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpE1ChanCellStorageType 1.3.6.1.4.1.562.2.4.1.12.8.2.3.1.1.4
This variable represents the storage type value for the lpE1ChanCell tables.
OBJECT-TYPE    
  StorageType  

lpE1ChanCellIndex 1.3.6.1.4.1.562.2.4.1.12.8.2.3.1.1.10
This variable represents the index for the lpE1ChanCell tables.
OBJECT-TYPE    
  NonReplicated  

lpE1ChanCellProvTable 1.3.6.1.4.1.562.2.4.1.12.8.2.3.10
This group contains the provisioning attributes for the AtmCell component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1ChanCellProvEntry

lpE1ChanCellProvEntry 1.3.6.1.4.1.562.2.4.1.12.8.2.3.10.1
An entry in the lpE1ChanCellProvTable.
OBJECT-TYPE    
  LpE1ChanCellProvEntry  

lpE1ChanCellAlarmActDelay 1.3.6.1.4.1.562.2.4.1.12.8.2.3.10.1.1
This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
OBJECT-TYPE    
  Unsigned32 0..2000  

lpE1ChanCellScrambleCellPayload 1.3.6.1.4.1.562.2.4.1.12.8.2.3.10.1.2
Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

lpE1ChanCellCorrectSingleBitHeaderErrors 1.3.6.1.4.1.562.2.4.1.12.8.2.3.10.1.3
This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

lpE1ChanCellOperTable 1.3.6.1.4.1.562.2.4.1.12.8.2.3.11
This group contains the common operational attributes for the AtmCell component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1ChanCellOperEntry

lpE1ChanCellOperEntry 1.3.6.1.4.1.562.2.4.1.12.8.2.3.11.1
An entry in the lpE1ChanCellOperTable.
OBJECT-TYPE    
  LpE1ChanCellOperEntry  

lpE1ChanCellLcdAlarm 1.3.6.1.4.1.562.2.4.1.12.8.2.3.11.1.1
This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpE1ChanCellStatsTable 1.3.6.1.4.1.562.2.4.1.12.8.2.3.12
This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1ChanCellStatsEntry

lpE1ChanCellStatsEntry 1.3.6.1.4.1.562.2.4.1.12.8.2.3.12.1
An entry in the lpE1ChanCellStatsTable.
OBJECT-TYPE    
  LpE1ChanCellStatsEntry  

lpE1ChanCellUncorrectableHecErrors 1.3.6.1.4.1.562.2.4.1.12.8.2.3.12.1.1
This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
OBJECT-TYPE    
  Counter32  

lpE1ChanCellSevErroredSec 1.3.6.1.4.1.562.2.4.1.12.8.2.3.12.1.2
This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
OBJECT-TYPE    
  Counter32  

lpE1ChanCellReceiveCellUtilization 1.3.6.1.4.1.562.2.4.1.12.8.2.3.12.1.3
This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  Gauge32 0..100  

lpE1ChanCellTransmitCellUtilization 1.3.6.1.4.1.562.2.4.1.12.8.2.3.12.1.4
This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  Gauge32 0..100  

lpE1ChanCellCorrectableHeaderErrors 1.3.6.1.4.1.562.2.4.1.12.8.2.3.12.1.5
This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
OBJECT-TYPE    
  Counter32  

lpE1ChanTc 1.3.6.1.4.1.562.2.4.1.12.8.2.4
OBJECT IDENTIFIER    

lpE1ChanTcRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.8.2.4.1
This entry controls the addition and deletion of lpE1ChanTc components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1ChanTcRowStatusEntry

lpE1ChanTcRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.8.2.4.1.1
A single entry in the table represents a single lpE1ChanTc component.
OBJECT-TYPE    
  LpE1ChanTcRowStatusEntry  

lpE1ChanTcRowStatus 1.3.6.1.4.1.562.2.4.1.12.8.2.4.1.1.1
This variable is used as the basis for SNMP naming of lpE1ChanTc components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

lpE1ChanTcComponentName 1.3.6.1.4.1.562.2.4.1.12.8.2.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpE1ChanTcStorageType 1.3.6.1.4.1.562.2.4.1.12.8.2.4.1.1.4
This variable represents the storage type value for the lpE1ChanTc tables.
OBJECT-TYPE    
  StorageType  

lpE1ChanTcIndex 1.3.6.1.4.1.562.2.4.1.12.8.2.4.1.1.10
This variable represents the index for the lpE1ChanTc tables.
OBJECT-TYPE    
  NonReplicated  

lpE1ChanTcProvTable 1.3.6.1.4.1.562.2.4.1.12.8.2.4.10
This group contains all specific provisioning data for a Tc component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1ChanTcProvEntry

lpE1ChanTcProvEntry 1.3.6.1.4.1.562.2.4.1.12.8.2.4.10.1
An entry in the lpE1ChanTcProvTable.
OBJECT-TYPE    
  LpE1ChanTcProvEntry  

lpE1ChanTcReplacementData 1.3.6.1.4.1.562.2.4.1.12.8.2.4.10.1.1
This attribute specifies the trunk conditioning data byte to be substituted into the timeslots defined by the Chan component under fault conditions. replacementData can be set to any two digit hexadecimal number. The following are recommended values: DS1 MUX Out Of Service Code = 0x1A E1 MUX Out Of Service Code = 0xFF
OBJECT-TYPE    
  Hex 0..255  

lpE1ChanTcSignalOneDuration 1.3.6.1.4.1.562.2.4.1.12.8.2.4.10.1.2
This attribute specifies the time duration in seconds for which signalOne is substituted into the appropriate signaling bits, when a lineType that uses CAS has been defined. When signalOneDuration has expired signalTwo is substituted into the appropriate signaling bits. If signalOneDuration is set to zero then only signalTwo is substituted into the appropriate signaling bits during error conditions. signalOneDuration can be set to any integer value from 0 to 60 seconds.
OBJECT-TYPE    
  Unsigned32 0..60  

lpE1ChanTcOpTable 1.3.6.1.4.1.562.2.4.1.12.8.2.4.11
This group contains all specific operational data for a Tc component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1ChanTcOpEntry

lpE1ChanTcOpEntry 1.3.6.1.4.1.562.2.4.1.12.8.2.4.11.1
An entry in the lpE1ChanTcOpTable.
OBJECT-TYPE    
  LpE1ChanTcOpEntry  

lpE1ChanTcIngressConditioning 1.3.6.1.4.1.562.2.4.1.12.8.2.4.11.1.1
This attribute indicates the status of locally generated trunk conditioning towards the ATM network. When trunk conditioning is being locally generated towards the ATM network, ingressConditioning is set to on. When trunk conditioning is not being locally generated towards the ATM network, ingressConditioning is set to off. Trunk conditioning is transmitted towards the ATM network under the following conditions: lossOfSignal (LOS) lossOfFrame (LOF) remoteAlarmIndication (RAI) alarmIndicationSignal (AIS) bufferUnderflow (BU) and in addition for E1: lossOfMultiframe (LOMF) receiveMultiframeRemoteAlarmIndication (RMRAI)
OBJECT-TYPE    
  INTEGER off(0), on(1)  

lpE1ChanTcEgressConditioning 1.3.6.1.4.1.562.2.4.1.12.8.2.4.11.1.2
This attribute indicates the status of locally generated trunk conditioning towards the PDH line. When trunk conditioning is being locally generated towards the PDH line, egressConditioning is set to on. When trunk conditioning is not being locally generated towards the PDH line, egressConditioning is set to off. Trunk conditioning is transmitted towards the PDH line under the following conditions: bufferUnderflow (BU) AAL1 protocol errors.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

lpE1ChanTcSigOneTable 1.3.6.1.4.1.562.2.4.1.12.8.2.4.398
This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted for the duration provisioned in signalOneDuration when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1ChanTcSigOneEntry

lpE1ChanTcSigOneEntry 1.3.6.1.4.1.562.2.4.1.12.8.2.4.398.1
An entry in the lpE1ChanTcSigOneTable.
OBJECT-TYPE    
  LpE1ChanTcSigOneEntry  

lpE1ChanTcSigOneIndex 1.3.6.1.4.1.562.2.4.1.12.8.2.4.398.1.1
This variable represents the lpE1ChanTcSigOneTable specific index for the lpE1ChanTcSigOneTable.
OBJECT-TYPE    
  INTEGER d(0), c(1), b(2), a(3)  

lpE1ChanTcSigOneValue 1.3.6.1.4.1.562.2.4.1.12.8.2.4.398.1.2
This variable represents an individual value for the lpE1ChanTcSigOneTable.
OBJECT-TYPE    
  Unsigned32 0..1  

lpE1ChanTcSigTwoTable 1.3.6.1.4.1.562.2.4.1.12.8.2.4.399
This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted after the duration provisioned in signalOneDuration has expired and when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1ChanTcSigTwoEntry

lpE1ChanTcSigTwoEntry 1.3.6.1.4.1.562.2.4.1.12.8.2.4.399.1
An entry in the lpE1ChanTcSigTwoTable.
OBJECT-TYPE    
  LpE1ChanTcSigTwoEntry  

lpE1ChanTcSigTwoIndex 1.3.6.1.4.1.562.2.4.1.12.8.2.4.399.1.1
This variable represents the lpE1ChanTcSigTwoTable specific index for the lpE1ChanTcSigTwoTable.
OBJECT-TYPE    
  INTEGER d(0), c(1), b(2), a(3)  

lpE1ChanTcSigTwoValue 1.3.6.1.4.1.562.2.4.1.12.8.2.4.399.1.2
This variable represents an individual value for the lpE1ChanTcSigTwoTable.
OBJECT-TYPE    
  Unsigned32 0..1  

lpE1ChanProvTable 1.3.6.1.4.1.562.2.4.1.12.8.2.10
This group contains all of the provisional data for a Channel component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1ChanProvEntry

lpE1ChanProvEntry 1.3.6.1.4.1.562.2.4.1.12.8.2.10.1
An entry in the lpE1ChanProvTable.
OBJECT-TYPE    
  LpE1ChanProvEntry  

lpE1ChanTimeslots 1.3.6.1.4.1.562.2.4.1.12.8.2.10.1.1
This attribute contains the list of timeslots that are used by the Channel component. Valid numbers are 1-24 for a Channel used by a DS1 component, and 1-31 for a Channel used by an E1 component. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) n29(29) n30(30) n31(31)
OBJECT-TYPE    
  OCTET STRING SIZE(4)  

lpE1ChanTimeslotDataRate 1.3.6.1.4.1.562.2.4.1.12.8.2.10.1.2
This attribute selects the data rate of the timeslots in a channel of a DS1 component. For E1, the data rate of the timeslots will always be 64kbit/s regardless of this attribute. When doNotOverride is selected for a channel on a DS1, the data rate of the channel's timeslots are dependent on the zeroCoding selection of the DS1 component. If the zeroCoding is B8ZS (where supported on the FP) or none, the timeslot's data rate will be 64kbit/s. If the zeroCoding option is bit7Stuffing, the data rate of a timeslot will be 56kbit/s. When 56kbit/s is selected for a channel on a DS1, the least significant bit of each timeslot of this Channel will always be set to 1 and not used for data. The data rate for the timeslots of this channel is therefore restricted to 56kbit/s. One application of this attribute is to allow a DS1 line to support mixing channels that originate from lines that use different zeroCoding schemes.
OBJECT-TYPE    
  INTEGER n56k(0), doNotOverride(1)  

lpE1ChanApplicationFramerName 1.3.6.1.4.1.562.2.4.1.12.8.2.10.1.3
This attribute defines the link to the software stack. It defines which application is running on top of this hardware component.
OBJECT-TYPE    
  Link  

lpE1ChanCidDataTable 1.3.6.1.4.1.562.2.4.1.12.8.2.11
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1ChanCidDataEntry

lpE1ChanCidDataEntry 1.3.6.1.4.1.562.2.4.1.12.8.2.11.1
An entry in the lpE1ChanCidDataTable.
OBJECT-TYPE    
  LpE1ChanCidDataEntry  

lpE1ChanCustomerIdentifier 1.3.6.1.4.1.562.2.4.1.12.8.2.11.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

lpE1ChanIfEntryTable 1.3.6.1.4.1.562.2.4.1.12.8.2.12
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1ChanIfEntryEntry

lpE1ChanIfEntryEntry 1.3.6.1.4.1.562.2.4.1.12.8.2.12.1
An entry in the lpE1ChanIfEntryTable.
OBJECT-TYPE    
  LpE1ChanIfEntryEntry  

lpE1ChanIfAdminStatus 1.3.6.1.4.1.562.2.4.1.12.8.2.12.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpE1ChanIfIndex 1.3.6.1.4.1.562.2.4.1.12.8.2.12.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

lpE1ChanOperStatusTable 1.3.6.1.4.1.562.2.4.1.12.8.2.13
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1ChanOperStatusEntry

lpE1ChanOperStatusEntry 1.3.6.1.4.1.562.2.4.1.12.8.2.13.1
An entry in the lpE1ChanOperStatusTable.
OBJECT-TYPE    
  LpE1ChanOperStatusEntry  

lpE1ChanSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.12.8.2.13.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpE1ChanStateTable 1.3.6.1.4.1.562.2.4.1.12.8.2.14
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1ChanStateEntry

lpE1ChanStateEntry 1.3.6.1.4.1.562.2.4.1.12.8.2.14.1
An entry in the lpE1ChanStateTable.
OBJECT-TYPE    
  LpE1ChanStateEntry  

lpE1ChanAdminState 1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpE1ChanOperationalState 1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpE1ChanUsageState 1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpE1ChanAvailabilityStatus 1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

lpE1ChanProceduralStatus 1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpE1ChanControlStatus 1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpE1ChanAlarmStatus 1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpE1ChanStandbyStatus 1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

lpE1ChanUnknownStatus 1.3.6.1.4.1.562.2.4.1.12.8.2.14.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

lpE1ChanOperTable 1.3.6.1.4.1.562.2.4.1.12.8.2.15
This group contains all of the operational data for a Channel component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1ChanOperEntry

lpE1ChanOperEntry 1.3.6.1.4.1.562.2.4.1.12.8.2.15.1
An entry in the lpE1ChanOperTable.
OBJECT-TYPE    
  LpE1ChanOperEntry  

lpE1ChanActualChannelSpeed 1.3.6.1.4.1.562.2.4.1.12.8.2.15.1.1
This attribute displays the measured link speed of the Channel component.
OBJECT-TYPE    
  Gauge32 0..4294967295  

lpE1ChanAdminInfoTable 1.3.6.1.4.1.562.2.4.1.12.8.2.16
This group contains the attributes pertaining to the vendor of the equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1ChanAdminInfoEntry

lpE1ChanAdminInfoEntry 1.3.6.1.4.1.562.2.4.1.12.8.2.16.1
An entry in the lpE1ChanAdminInfoTable.
OBJECT-TYPE    
  LpE1ChanAdminInfoEntry  

lpE1ChanVendor 1.3.6.1.4.1.562.2.4.1.12.8.2.16.1.1
This is the name of the vendor supplying the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..20)  

lpE1ChanCommentText 1.3.6.1.4.1.562.2.4.1.12.8.2.16.1.2
Any miscellaneous text about the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..60)  

lpE1Test 1.3.6.1.4.1.562.2.4.1.12.8.3
OBJECT IDENTIFIER    

lpE1TestRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.8.3.1
This entry controls the addition and deletion of lpE1Test components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1TestRowStatusEntry

lpE1TestRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.8.3.1.1
A single entry in the table represents a single lpE1Test component.
OBJECT-TYPE    
  LpE1TestRowStatusEntry  

lpE1TestRowStatus 1.3.6.1.4.1.562.2.4.1.12.8.3.1.1.1
This variable is used as the basis for SNMP naming of lpE1Test components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpE1TestComponentName 1.3.6.1.4.1.562.2.4.1.12.8.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpE1TestStorageType 1.3.6.1.4.1.562.2.4.1.12.8.3.1.1.4
This variable represents the storage type value for the lpE1Test tables.
OBJECT-TYPE    
  StorageType  

lpE1TestIndex 1.3.6.1.4.1.562.2.4.1.12.8.3.1.1.10
This variable represents the index for the lpE1Test tables.
OBJECT-TYPE    
  NonReplicated  

lpE1TestStateTable 1.3.6.1.4.1.562.2.4.1.12.8.3.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1TestStateEntry

lpE1TestStateEntry 1.3.6.1.4.1.562.2.4.1.12.8.3.10.1
An entry in the lpE1TestStateTable.
OBJECT-TYPE    
  LpE1TestStateEntry  

lpE1TestAdminState 1.3.6.1.4.1.562.2.4.1.12.8.3.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpE1TestOperationalState 1.3.6.1.4.1.562.2.4.1.12.8.3.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpE1TestUsageState 1.3.6.1.4.1.562.2.4.1.12.8.3.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpE1TestSetupTable 1.3.6.1.4.1.562.2.4.1.12.8.3.11
This group contains all of the operational data for a Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1TestSetupEntry

lpE1TestSetupEntry 1.3.6.1.4.1.562.2.4.1.12.8.3.11.1
An entry in the lpE1TestSetupTable.
OBJECT-TYPE    
  LpE1TestSetupEntry  

lpE1TestPurpose 1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.1
This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
OBJECT-TYPE    
  AsciiString SIZE(0..40)  

lpE1TestType 1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.2
This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
OBJECT-TYPE    
  INTEGER card(0), manual(1), localLoop(2), remoteLoop(3), externalLoop(4), payloadLoop(5), remoteLoopThisTrib(6), v54RemoteLoop(7), pn127RemoteLoop(8)  

lpE1TestFrmSize 1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.3
This attribute defines the size of the test data frames in number of bytes.
OBJECT-TYPE    
  Unsigned32 4..4096  

lpE1TestFrmPatternType 1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.4
This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
OBJECT-TYPE    
  INTEGER ccitt32kBitPattern(0), ccitt8MBitPattern(1), customizedPattern(2)  

lpE1TestCustomizedPattern 1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.5
This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
OBJECT-TYPE    
  Hex 0..4294967295  

lpE1TestDataStartDelay 1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.6
This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
OBJECT-TYPE    
  Unsigned32 0..1814400  

lpE1TestDisplayInterval 1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.7
This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
OBJECT-TYPE    
  Unsigned32 0..30240  

lpE1TestDuration 1.3.6.1.4.1.562.2.4.1.12.8.3.11.1.8
This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
OBJECT-TYPE    
  Unsigned32 1..30240  

lpE1TestResultsTable 1.3.6.1.4.1.562.2.4.1.12.8.3.12
This group contains all the statistics related attributes of the Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1TestResultsEntry

lpE1TestResultsEntry 1.3.6.1.4.1.562.2.4.1.12.8.3.12.1
An entry in the lpE1TestResultsTable.
OBJECT-TYPE    
  LpE1TestResultsEntry  

lpE1TestElapsedTime 1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.1
This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
OBJECT-TYPE    
  Counter32  

lpE1TestTimeRemaining 1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.2
This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

lpE1TestCauseOfTermination 1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.3
This attribute records the reason the test is terminated.
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4), hardwareReconfigured(5)  

lpE1TestBitsTx 1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.4
This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpE1TestBytesTx 1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.5
This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpE1TestFrmTx 1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.6
This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpE1TestBitsRx 1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.7
This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpE1TestBytesRx 1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.8
This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpE1TestFrmRx 1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.9
This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpE1TestErroredFrmRx 1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.10
This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
OBJECT-TYPE    
  PassportCounter64  

lpE1TestBitErrorRate 1.3.6.1.4.1.562.2.4.1.12.8.3.12.1.11
This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
OBJECT-TYPE    
  AsciiString SIZE(5)  

lpE1Dsp 1.3.6.1.4.1.562.2.4.1.12.8.4
OBJECT IDENTIFIER    

lpE1DspRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.8.4.1
This entry controls the addition and deletion of lpE1Dsp components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1DspRowStatusEntry

lpE1DspRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.8.4.1.1
A single entry in the table represents a single lpE1Dsp component.
OBJECT-TYPE    
  LpE1DspRowStatusEntry  

lpE1DspRowStatus 1.3.6.1.4.1.562.2.4.1.12.8.4.1.1.1
This variable is used as the basis for SNMP naming of lpE1Dsp components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpE1DspComponentName 1.3.6.1.4.1.562.2.4.1.12.8.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpE1DspStorageType 1.3.6.1.4.1.562.2.4.1.12.8.4.1.1.4
This variable represents the storage type value for the lpE1Dsp tables.
OBJECT-TYPE    
  StorageType  

lpE1DspIndex 1.3.6.1.4.1.562.2.4.1.12.8.4.1.1.10
This variable represents the index for the lpE1Dsp tables.
OBJECT-TYPE    
  NonReplicated  

lpE1Audio 1.3.6.1.4.1.562.2.4.1.12.8.5
OBJECT IDENTIFIER    

lpE1AudioRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.8.5.1
This entry controls the addition and deletion of lpE1Audio components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1AudioRowStatusEntry

lpE1AudioRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.8.5.1.1
A single entry in the table represents a single lpE1Audio component.
OBJECT-TYPE    
  LpE1AudioRowStatusEntry  

lpE1AudioRowStatus 1.3.6.1.4.1.562.2.4.1.12.8.5.1.1.1
This variable is used as the basis for SNMP naming of lpE1Audio components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpE1AudioComponentName 1.3.6.1.4.1.562.2.4.1.12.8.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpE1AudioStorageType 1.3.6.1.4.1.562.2.4.1.12.8.5.1.1.4
This variable represents the storage type value for the lpE1Audio tables.
OBJECT-TYPE    
  StorageType  

lpE1AudioIndex 1.3.6.1.4.1.562.2.4.1.12.8.5.1.1.10
This variable represents the index for the lpE1Audio tables.
OBJECT-TYPE    
  NonReplicated  

lpE1ProvTable 1.3.6.1.4.1.562.2.4.1.12.8.10
This group contains all of the provisioning data for an E1 component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1ProvEntry

lpE1ProvEntry 1.3.6.1.4.1.562.2.4.1.12.8.10.1
An entry in the lpE1ProvTable.
OBJECT-TYPE    
  LpE1ProvEntry  

lpE1LineType 1.3.6.1.4.1.562.2.4.1.12.8.10.1.1
This attribute specifies the framing of the E1 line. When cas (channel associated signalling) is selected, timeslot 16 is reserved for multiframe signalling and only 30 timeslots are available for data. The signalling bits are not interpreted. When ccs (common channel signalling) is selected, timeslot 16 is not reserved for multiframe signalling and 31 timeslots are available for data. The signalling bits are not interpreted. When unframed is selected, a clear channel is defined whereby data from all timeslots including the framing data (in timeslot 0) and timeslot 16 are passed transparently. This value is valid only for AAL1 cards. For cell-based cards the ATM Forum specifies that timeslot 16 be reserved, leaving 30 timeslots available for data. The default value is cas except for the 8pE1Atm card, for which the default and only valid value is ccs.
OBJECT-TYPE    
  INTEGER ccs(2), cas(3), unframed(6)  

lpE1ClockingSource 1.3.6.1.4.1.562.2.4.1.12.8.10.1.2
This attribute defines the source of the transmit clock for the E1 line. When local is selected, the crystal on the port generates the clocking for the line. When line is selected, the port synchronizes to the clock from the facility. When module is selected, the ports clock synchronizes to the clock provided by the oscillator on the active CP. When otherPort is selected, the port synchronizes to the port with a clocking source of line. When srtsMode is selected, the port sychronization is taken from the SRTS (Synchronous Residual Time Stamp) bits within the ATM cell. If the NetworkSynchronization (NS) component is present the default value of this attribute will be module otherwise it will default to line except for the 3pE1Atm card which defaults to local. The 3pE1Atm card has one common clock source for all ports and does not support the line clock source; all three ports must have the same value, either local or module. The clockingSource values otherPort and srtsMode are only valid for the AAL1 cards. For the AAL1 cards either: all four ports' clockingSource values must be local OR all four ports' clockingSource values must be module OR one port's clockingSource value must be line and the other three must be otherPort. A port can only have srtsMode selected if the other ports are module or srtsMode.
OBJECT-TYPE    
  INTEGER local(0), line(1), module(2), otherPort(3), srtsMode(4)  

lpE1Crc4Mode 1.3.6.1.4.1.562.2.4.1.12.8.10.1.3
This attribute defines whether the CRC-4 checking and generation on the E1 line is enabled or disabled. The default CRC-4 mode is off except for the cell-based cards which default to on as per the ATM Forum.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpE1SendRaiOnAis 1.3.6.1.4.1.562.2.4.1.12.8.10.1.4
This attribute defines whether the Remote Alarm Indicator (RAI) will be sent when receiving an AIS alarm. The value is yes by default; it can be changed to no only for ports on J2MV cards.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

lpE1RaiDeclareAlarmTime 1.3.6.1.4.1.562.2.4.1.12.8.10.1.5
This attribute specifies the period of time that a Remote Alarm Indicator (RAI) must be present before declaring an RAI alarm. The value of auto sets the RAI declare time to the default value for E1 and E1C card types which do not have hardware support for RAI response. On E1C card types with hardware support, if the value of auto is set, RAI response is done according to the standards. If auto is set, the value of the raiClearAlarmTime attribute is ignored and auto is used. This attribute is for E1 and E1C card types only. For all other card types, the default value must be used. VALUES ( 0 = auto )
OBJECT-TYPE    
  Unsigned32 0 | 1..20000  

lpE1RaiClearAlarmTime 1.3.6.1.4.1.562.2.4.1.12.8.10.1.6
This attribute specifies the period of time that a Remote Alarm Indicator (RAI) has been absent before clearing an RAI alarm. The value of auto sets the RAI clear time to the default value for E1 and E1C card types which do not have hardware support for RAI response. On E1C card types with hardware support, if the value of auto is set, RAI response is done according to the standards. If auto is set, the value of the raiDeclareAlarmTime attribute is ignored and auto is used. This attribute is for E1 and E1C card types only. For all other card types, the default value must be used. VALUES ( 0 = auto )
OBJECT-TYPE    
  Unsigned32 0 | 1..20000  

lpE1CidDataTable 1.3.6.1.4.1.562.2.4.1.12.8.11
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1CidDataEntry

lpE1CidDataEntry 1.3.6.1.4.1.562.2.4.1.12.8.11.1
An entry in the lpE1CidDataTable.
OBJECT-TYPE    
  LpE1CidDataEntry  

lpE1CustomerIdentifier 1.3.6.1.4.1.562.2.4.1.12.8.11.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

lpE1AdminInfoTable 1.3.6.1.4.1.562.2.4.1.12.8.12
This group contains the attributes pertaining to the vendor of the equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1AdminInfoEntry

lpE1AdminInfoEntry 1.3.6.1.4.1.562.2.4.1.12.8.12.1
An entry in the lpE1AdminInfoTable.
OBJECT-TYPE    
  LpE1AdminInfoEntry  

lpE1Vendor 1.3.6.1.4.1.562.2.4.1.12.8.12.1.1
This is the name of the vendor supplying the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..20)  

lpE1CommentText 1.3.6.1.4.1.562.2.4.1.12.8.12.1.2
Any miscellaneous text about the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..60)  

lpE1IfEntryTable 1.3.6.1.4.1.562.2.4.1.12.8.13
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1IfEntryEntry

lpE1IfEntryEntry 1.3.6.1.4.1.562.2.4.1.12.8.13.1
An entry in the lpE1IfEntryTable.
OBJECT-TYPE    
  LpE1IfEntryEntry  

lpE1IfAdminStatus 1.3.6.1.4.1.562.2.4.1.12.8.13.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpE1IfIndex 1.3.6.1.4.1.562.2.4.1.12.8.13.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

lpE1OperStatusTable 1.3.6.1.4.1.562.2.4.1.12.8.14
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1OperStatusEntry

lpE1OperStatusEntry 1.3.6.1.4.1.562.2.4.1.12.8.14.1
An entry in the lpE1OperStatusTable.
OBJECT-TYPE    
  LpE1OperStatusEntry  

lpE1SnmpOperStatus 1.3.6.1.4.1.562.2.4.1.12.8.14.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpE1StateTable 1.3.6.1.4.1.562.2.4.1.12.8.15
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1StateEntry

lpE1StateEntry 1.3.6.1.4.1.562.2.4.1.12.8.15.1
An entry in the lpE1StateTable.
OBJECT-TYPE    
  LpE1StateEntry  

lpE1AdminState 1.3.6.1.4.1.562.2.4.1.12.8.15.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpE1OperationalState 1.3.6.1.4.1.562.2.4.1.12.8.15.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpE1UsageState 1.3.6.1.4.1.562.2.4.1.12.8.15.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpE1AvailabilityStatus 1.3.6.1.4.1.562.2.4.1.12.8.15.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

lpE1ProceduralStatus 1.3.6.1.4.1.562.2.4.1.12.8.15.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpE1ControlStatus 1.3.6.1.4.1.562.2.4.1.12.8.15.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpE1AlarmStatus 1.3.6.1.4.1.562.2.4.1.12.8.15.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpE1StandbyStatus 1.3.6.1.4.1.562.2.4.1.12.8.15.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

lpE1UnknownStatus 1.3.6.1.4.1.562.2.4.1.12.8.15.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

lpE1OperTable 1.3.6.1.4.1.562.2.4.1.12.8.16
This group contains the common operational data for a component in a digital hierarchy interface.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1OperEntry

lpE1OperEntry 1.3.6.1.4.1.562.2.4.1.12.8.16.1
An entry in the lpE1OperTable.
OBJECT-TYPE    
  LpE1OperEntry  

lpE1LosAlarm 1.3.6.1.4.1.562.2.4.1.12.8.16.1.1
This attribute displays whether a LOS (Loss of Signal) alarm state has been entered. A LOS alarm is declared after LOS defects have been observed and accumulated for a period of 2 seconds +/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). A LOS defect is detected upon observing all zeros for 150 ms (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: upon observing 175 +/- 75 pulse positions with no pulses of either positive or negative polarity). If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOS alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOS alarm state. The LOS alarm state is cleared when LOS defects are absent for 10 seconds +/- 0.5 seconds.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpE1RxAisAlarm 1.3.6.1.4.1.562.2.4.1.12.8.16.1.2
This attribute displays whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/ - 0.5 seconds. An AIS defect is detected after having received less than 3 zeros in a 2048 bit period (for 8pDS1Atm cards: when both an Out Of Frame condition exists and a 1's density of at least 99.9% is present for a time T, where 3 ms T 75 ms; for 8pE1Atm cards: when both an Out Of Frame condition exists and fewer than three 0's have been received in 512 bit periods). If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled for the duration of an AIS alarm state. The AIS alarm state is cleared when AIS defects are absent for 10 seconds +/- 0.5 seconds.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpE1LofAlarm 1.3.6.1.4.1.562.2.4.1.12.8.16.1.3
This attribute displays whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defects (for DS1: 2 out of 5 framing bits in error; for E1: 3 consecutive frame alignment patterns in error) have been detected for 3 seconds +/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOF alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOF alarm state The condition is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpE1RxRaiAlarm 1.3.6.1.4.1.562.2.4.1.12.8.16.1.4
This attribute displays whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered when the RAI defect indicator has been observed and accumulated for 3.5 seconds +/- 0.5 seconds. For 3pDS1Atm, and 8pDS1Atm cards: alarm is declared immediately upon observing the defect is present, with no integration time. For 3pE1Atm, and 8pE1Atm cards: alarm state is entered when the RAI defect indicator has been observed and accumulated for 2.5 seconds +/- 0.5 seconds. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The RAI alarm state is cleared when the RAI defect indicator has been absent for 10 seconds +/- 0.5 seconds (for 3pDS1Atm, and 8pDS1Atm cards: alarm is cleared immediately upon observing the defect is absent, with no integration time). The RAI alarm is usually an indication that the far end facility is unable to gain synchronization.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpE1TxAisAlarm 1.3.6.1.4.1.562.2.4.1.12.8.16.1.5
This attribute displays whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transmitted when the port is in a locked state.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpE1TxRaiAlarm 1.3.6.1.4.1.562.2.4.1.12.8.16.1.6
This attribute displays whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the port detects a LOF alarm condition (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: RAI is transmitted when the port detects a LOS, LOF, or AIS condition).
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpE1E1OperTable 1.3.6.1.4.1.562.2.4.1.12.8.17
This group contains all of the operational data for a E1 component that are not defined in the DSCommonOp group.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1E1OperEntry

lpE1E1OperEntry 1.3.6.1.4.1.562.2.4.1.12.8.17.1
An entry in the lpE1E1OperTable.
OBJECT-TYPE    
  LpE1E1OperEntry  

lpE1MultifrmLofAlarm 1.3.6.1.4.1.562.2.4.1.12.8.17.1.1
This attribute indicates whether a multiframe LOF (loss of frame) alarm state is entered. A multiframe LOF alarm state is entered when a multiframe LOF defect (2 consecutive errors in the multiframe alignment signal) has been detected and accumulated for 2.5 seconds +/- 0.5 seconds. If the multiframe LOF defects are intermittently occurring, the multiframe LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The alarm is cleared when the defect is not detected for 10 seconds +/- 0.5 seconds. When the multiframe LOF alarm is on, a multiframe RAI alarm indicator is transmitted on the line. The 8pE1Atm card does not support the multiframe LOF alarm.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpE1RxMultifrmRaiAlarm 1.3.6.1.4.1.562.2.4.1.12.8.17.1.2
This attribute displays whether a multiframe RAI (remote alarm indicator) alarm state has been entered. A multiframe RAI alarm state is entered when a multiframe RAI alarm indicator (bit 6 of timeslot 16 in frame 0 is set to a one) is observed and accumulated for 2.5 seconds +/- 0.5 seconds. If the multiframe RAI indicator is intermittently received, the multiframe RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The multiframe RAI alarm condition is cleared when the multiframe RAI alarm indication is not received for 10 seconds +/- 0.5 seconds. The multiframe RAI alarm is usually an indication that the far end facility is unable to gain multiframe synchronization. The 8pE1Atm card does not support the multiframe RAI alarm.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpE1TxMultifrmRaiAlarm 1.3.6.1.4.1.562.2.4.1.12.8.17.1.3
This attribute displays whether a multiframe RAI (remote alarm indicator) alarm is being sent on the E1 line. This is transmitted when the E1 port detects a multiframe LOF condition. The 8pE1Atm card does not generate the multiframe RAI alarm.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpE1StatsTable 1.3.6.1.4.1.562.2.4.1.12.8.18
This group contains the common statistical data for a component in a digital hierarchy interface.
OBJECT-TYPE    
  SEQUENCE OF  
    LpE1StatsEntry

lpE1StatsEntry 1.3.6.1.4.1.562.2.4.1.12.8.18.1
An entry in the lpE1StatsTable.
OBJECT-TYPE    
  LpE1StatsEntry  

lpE1RunningTime 1.3.6.1.4.1.562.2.4.1.12.8.18.1.1
The number of seconds since the port component was activated.
OBJECT-TYPE    
  Counter32  

lpE1ErrorFreeSec 1.3.6.1.4.1.562.2.4.1.12.8.18.1.2
The number of seconds that the port has been in an error free state.
OBJECT-TYPE    
  Counter32  

lpE1ErroredSec 1.3.6.1.4.1.562.2.4.1.12.8.18.1.3
An errored second is declared when a second with one or more Code Violation Error events, or one or more Out Of Frame events occurs. A code violation error may be a CRC error or a BPV error. An Out Of Frame event occurs when 2 out of 5 framing bits are in error.
OBJECT-TYPE    
  Counter32  

lpE1SevErroredSec 1.3.6.1.4.1.562.2.4.1.12.8.18.1.4
A severely errored second occurs when a second with 320 or more Code Violation Error events or one or more Out Of Frame events occurs.
OBJECT-TYPE    
  Counter32  

lpE1SevErroredFrmSec 1.3.6.1.4.1.562.2.4.1.12.8.18.1.5
A severely errored framing second occurs when a second with one or more Out Of Frame events occurs.
OBJECT-TYPE    
  Counter32  

lpE1UnavailSec 1.3.6.1.4.1.562.2.4.1.12.8.18.1.6
The total number of seconds that the interface is in an unavailable signal state. An unavailable signal state occurs at the onset of 10 consecutive Severely Errored Seconds. The state is cleared at the onset of 10 seconds with no Severely Errored Seconds.
OBJECT-TYPE    
  Counter32  

lpE1BpvErrors 1.3.6.1.4.1.562.2.4.1.12.8.18.1.7
The current count of Bipolar Violations. A bipolar violation is an error in the alternate mark inversion pattern (AMI) on the line.
OBJECT-TYPE    
  Counter32  

lpE1CrcErrors 1.3.6.1.4.1.562.2.4.1.12.8.18.1.8
If the interface is a DS1 line, it is the current count of CRC-6 errors. These will only be counted when the lineType is ESF. If the interface is an E1 line, it is the total number of CRC-4 errors. These will only be counted when crc4Mode is on.
OBJECT-TYPE    
  Counter32  

lpE1FrmErrors 1.3.6.1.4.1.562.2.4.1.12.8.18.1.9
The current count of frame errors. A frame error is an error in the framing bits
OBJECT-TYPE    
  Counter32  

lpE1LosStateChanges 1.3.6.1.4.1.562.2.4.1.12.8.18.1.10
The total number of times that the line lost signal.
OBJECT-TYPE    
  Counter32  

lpE1SlipErrors 1.3.6.1.4.1.562.2.4.1.12.8.18.1.11
The total number of times that the line experienced a controlled frame slip. This attribute is incremented for ports on the voice cards (for example the 1pDS1V and the 1pE1V function processors) only.
OBJECT-TYPE    
  Counter32  

lpV35 1.3.6.1.4.1.562.2.4.1.12.9
OBJECT IDENTIFIER    

lpV35RowStatusTable 1.3.6.1.4.1.562.2.4.1.12.9.1
This entry controls the addition and deletion of lpV35 components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpV35RowStatusEntry

lpV35RowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.9.1.1
A single entry in the table represents a single lpV35 component.
OBJECT-TYPE    
  LpV35RowStatusEntry  

lpV35RowStatus 1.3.6.1.4.1.562.2.4.1.12.9.1.1.1
This variable is used as the basis for SNMP naming of lpV35 components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

lpV35ComponentName 1.3.6.1.4.1.562.2.4.1.12.9.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpV35StorageType 1.3.6.1.4.1.562.2.4.1.12.9.1.1.4
This variable represents the storage type value for the lpV35 tables.
OBJECT-TYPE    
  StorageType  

lpV35Index 1.3.6.1.4.1.562.2.4.1.12.9.1.1.10
This variable represents the index for the lpV35 tables.
OBJECT-TYPE    
  Integer32 0..7  

lpV35Test 1.3.6.1.4.1.562.2.4.1.12.9.2
OBJECT IDENTIFIER    

lpV35TestRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.9.2.1
This entry controls the addition and deletion of lpV35Test components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpV35TestRowStatusEntry

lpV35TestRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.9.2.1.1
A single entry in the table represents a single lpV35Test component.
OBJECT-TYPE    
  LpV35TestRowStatusEntry  

lpV35TestRowStatus 1.3.6.1.4.1.562.2.4.1.12.9.2.1.1.1
This variable is used as the basis for SNMP naming of lpV35Test components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpV35TestComponentName 1.3.6.1.4.1.562.2.4.1.12.9.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpV35TestStorageType 1.3.6.1.4.1.562.2.4.1.12.9.2.1.1.4
This variable represents the storage type value for the lpV35Test tables.
OBJECT-TYPE    
  StorageType  

lpV35TestIndex 1.3.6.1.4.1.562.2.4.1.12.9.2.1.1.10
This variable represents the index for the lpV35Test tables.
OBJECT-TYPE    
  NonReplicated  

lpV35TestStateTable 1.3.6.1.4.1.562.2.4.1.12.9.2.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpV35TestStateEntry

lpV35TestStateEntry 1.3.6.1.4.1.562.2.4.1.12.9.2.10.1
An entry in the lpV35TestStateTable.
OBJECT-TYPE    
  LpV35TestStateEntry  

lpV35TestAdminState 1.3.6.1.4.1.562.2.4.1.12.9.2.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpV35TestOperationalState 1.3.6.1.4.1.562.2.4.1.12.9.2.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpV35TestUsageState 1.3.6.1.4.1.562.2.4.1.12.9.2.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpV35TestSetupTable 1.3.6.1.4.1.562.2.4.1.12.9.2.11
This group contains all of the operational data for a Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpV35TestSetupEntry

lpV35TestSetupEntry 1.3.6.1.4.1.562.2.4.1.12.9.2.11.1
An entry in the lpV35TestSetupTable.
OBJECT-TYPE    
  LpV35TestSetupEntry  

lpV35TestPurpose 1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.1
This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
OBJECT-TYPE    
  AsciiString SIZE(0..40)  

lpV35TestType 1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.2
This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
OBJECT-TYPE    
  INTEGER card(0), manual(1), localLoop(2), remoteLoop(3), externalLoop(4), payloadLoop(5), remoteLoopThisTrib(6), v54RemoteLoop(7), pn127RemoteLoop(8)  

lpV35TestFrmSize 1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.3
This attribute defines the size of the test data frames in number of bytes.
OBJECT-TYPE    
  Unsigned32 4..4096  

lpV35TestFrmPatternType 1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.4
This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
OBJECT-TYPE    
  INTEGER ccitt32kBitPattern(0), ccitt8MBitPattern(1), customizedPattern(2)  

lpV35TestCustomizedPattern 1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.5
This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
OBJECT-TYPE    
  Hex 0..4294967295  

lpV35TestDataStartDelay 1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.6
This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
OBJECT-TYPE    
  Unsigned32 0..1814400  

lpV35TestDisplayInterval 1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.7
This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
OBJECT-TYPE    
  Unsigned32 0..30240  

lpV35TestDuration 1.3.6.1.4.1.562.2.4.1.12.9.2.11.1.8
This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
OBJECT-TYPE    
  Unsigned32 1..30240  

lpV35TestResultsTable 1.3.6.1.4.1.562.2.4.1.12.9.2.12
This group contains all the statistics related attributes of the Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpV35TestResultsEntry

lpV35TestResultsEntry 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1
An entry in the lpV35TestResultsTable.
OBJECT-TYPE    
  LpV35TestResultsEntry  

lpV35TestElapsedTime 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.1
This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
OBJECT-TYPE    
  Counter32  

lpV35TestTimeRemaining 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.2
This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

lpV35TestCauseOfTermination 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.3
This attribute records the reason the test is terminated.
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4), hardwareReconfigured(5)  

lpV35TestBitsTx 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.4
This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpV35TestBytesTx 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.5
This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpV35TestFrmTx 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.6
This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpV35TestBitsRx 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.7
This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpV35TestBytesRx 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.8
This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpV35TestFrmRx 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.9
This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpV35TestErroredFrmRx 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.10
This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
OBJECT-TYPE    
  PassportCounter64  

lpV35TestBitErrorRate 1.3.6.1.4.1.562.2.4.1.12.9.2.12.1.11
This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
OBJECT-TYPE    
  AsciiString SIZE(5)  

lpV35ProvTable 1.3.6.1.4.1.562.2.4.1.12.9.10
This group contains all specific provisioning data for a V35 component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpV35ProvEntry

lpV35ProvEntry 1.3.6.1.4.1.562.2.4.1.12.9.10.1
An entry in the lpV35ProvTable.
OBJECT-TYPE    
  LpV35ProvEntry  

lpV35LinkMode 1.3.6.1.4.1.562.2.4.1.12.9.10.1.1
This attribute defines the intended gender of the V.35 interface. The actual gender of the interface is determined by the physical connection to the patch panel. If the hardware setup does not match this attribute, an alarm will be generated. In dte mode, the RTS line signal is driven as specified by the attribute readyLineState when the interface passes its initial diagnostics. Then, the RTS line signal will be driven as specified in the attribute dataTransferLineState when the application is ready to transfer data. On the other hand, the input line signals (RFS, DSR, and DCD) are compared against those specified in the attributes readyLineState and dataTransferLineState. The application will be notified when the specified input line states are observed. In dce mode, the V35 component behaves similarly as when it is in dte mode. However, it will be driving the DCE line signals (RFS, DSR, and DCD) and monitoring the DTE line signal (RTS) as specified by the attributes readyLineState and dataTransferLineState.
OBJECT-TYPE    
  INTEGER dte(0), dce(128)  

lpV35ReadyLineState 1.3.6.1.4.1.562.2.4.1.12.9.10.1.2
This attribute specifies the line signals originating from the V.35 interface that will always be turned on, provided the interface passes its diagnostics. This set of signals is generally required for maintaining the connection. Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. See also linkMode. Description of bits: rfs(0) dsr(1) dcd(2) rts(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpV35DataTransferLineState 1.3.6.1.4.1.562.2.4.1.12.9.10.1.3
This attribute specifies the line signals required to indicate that the external equipment is in a good state (that is, data transfer can proceed). Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. The value of this attribute must be a superset of that of the readyLineState attribute. See also linkMode. Description of bits: rfs(0) dsr(1) dcd(2) rts(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpV35LineStatusTimeOut 1.3.6.1.4.1.562.2.4.1.12.9.10.1.4
This attribute defines the time that the line state must be stable (good or bad) before a line state change is declared.
OBJECT-TYPE    
  Unsigned32 10..20000  

lpV35LineSpeed 1.3.6.1.4.1.562.2.4.1.12.9.10.1.5
This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a clock. The clock rate is rounded up to the nearest available value. Note that the actual clock rates are available in the operational attributes actualTxLineSpeed and actualRxLineSpeed. The actual lineSpeeds configurable on a V.35 DCE interface are: 3840000, 2560000, 2048000, 1920000, 1536000, 1344000, 1280000, 1024000, 960000, 768000, 672000, 640000, 512000, 448000, 384000, 336000, 320000, 256000, 224000, 192000, 168000, 128000, 112000, 64000, 56000, 48000, 32000, 19200, 9600. Note that linspeeds of 1024000 and 2048000 cannot be provisioned on cards that have ports provisioned at 3840000, 2560000, 1920000, 1280000, 960000, 640000 or 320000.
OBJECT-TYPE    
  Unsigned32 9600..3840000  

lpV35ClockingSource 1.3.6.1.4.1.562.2.4.1.12.9.10.1.6
This attribute defines the source of synchronization of the outgoing clocks. This attribute is only used when the actualLinkMode is dce. If the value of the attribute is local, the outgoing clocks are synchronized to a local oscillator on the FP. If the value of the attribute is module, the outgoing clocks are synchronized to the oscillator on the active CP.
OBJECT-TYPE    
  INTEGER local(0), module(1)  

lpV35DteDataClockSource 1.3.6.1.4.1.562.2.4.1.12.9.10.1.7
This attribute is only used when the actualLinkMode is dce. It is used to determine the clock to be used to recover the receive data. A DTE interface uses TSET(DCE) and RSET(DCE) for timing. If the value of the attribute is fromDce, the DCE uses the internally generated transmit clock to supply both TSET(DCE) and RSET(DCE). If the value of the attribute is fromDte, the DCE still uses the internally generated transmit clock to supply TSET(DCE), but the receive timing is derived from TSET(DTE) on the link. The fromDte mode is recommended when the DTE is far away from the DCE interface. Note that TSET(DTE) is CCITT V.24 circuit 113; TSET(DCE) is CCITT V.24 circuit 114; and RSET(DCE) is CCITT V.24 circuit 115.
OBJECT-TYPE    
  INTEGER fromDce(0), fromDte(2)  

lpV35ApplicationFramerName 1.3.6.1.4.1.562.2.4.1.12.9.10.1.8
This attribute contains the component name of a Framer which is associated with the V35 component.
OBJECT-TYPE    
  Link  

lpV35EnableDynamicSpeed 1.3.6.1.4.1.562.2.4.1.12.9.10.1.9
When set to yes, this attribute specifies that the transmit link speed should be set to the calculated receiver link speed. This attribute can be set to yes only if the linkMode is dce and the dteDataClockSource is fromDte.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

lpV35CidDataTable 1.3.6.1.4.1.562.2.4.1.12.9.11
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    LpV35CidDataEntry

lpV35CidDataEntry 1.3.6.1.4.1.562.2.4.1.12.9.11.1
An entry in the lpV35CidDataTable.
OBJECT-TYPE    
  LpV35CidDataEntry  

lpV35CustomerIdentifier 1.3.6.1.4.1.562.2.4.1.12.9.11.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

lpV35AdminInfoTable 1.3.6.1.4.1.562.2.4.1.12.9.12
This group contains the attributes pertaining to the vendor of the equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    LpV35AdminInfoEntry

lpV35AdminInfoEntry 1.3.6.1.4.1.562.2.4.1.12.9.12.1
An entry in the lpV35AdminInfoTable.
OBJECT-TYPE    
  LpV35AdminInfoEntry  

lpV35Vendor 1.3.6.1.4.1.562.2.4.1.12.9.12.1.1
This is the name of the vendor supplying the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..20)  

lpV35CommentText 1.3.6.1.4.1.562.2.4.1.12.9.12.1.2
Any miscellaneous text about the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..60)  

lpV35IfEntryTable 1.3.6.1.4.1.562.2.4.1.12.9.13
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    LpV35IfEntryEntry

lpV35IfEntryEntry 1.3.6.1.4.1.562.2.4.1.12.9.13.1
An entry in the lpV35IfEntryTable.
OBJECT-TYPE    
  LpV35IfEntryEntry  

lpV35IfAdminStatus 1.3.6.1.4.1.562.2.4.1.12.9.13.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpV35IfIndex 1.3.6.1.4.1.562.2.4.1.12.9.13.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

lpV35OperStatusTable 1.3.6.1.4.1.562.2.4.1.12.9.14
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpV35OperStatusEntry

lpV35OperStatusEntry 1.3.6.1.4.1.562.2.4.1.12.9.14.1
An entry in the lpV35OperStatusTable.
OBJECT-TYPE    
  LpV35OperStatusEntry  

lpV35SnmpOperStatus 1.3.6.1.4.1.562.2.4.1.12.9.14.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpV35StateTable 1.3.6.1.4.1.562.2.4.1.12.9.15
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpV35StateEntry

lpV35StateEntry 1.3.6.1.4.1.562.2.4.1.12.9.15.1
An entry in the lpV35StateTable.
OBJECT-TYPE    
  LpV35StateEntry  

lpV35AdminState 1.3.6.1.4.1.562.2.4.1.12.9.15.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpV35OperationalState 1.3.6.1.4.1.562.2.4.1.12.9.15.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpV35UsageState 1.3.6.1.4.1.562.2.4.1.12.9.15.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpV35AvailabilityStatus 1.3.6.1.4.1.562.2.4.1.12.9.15.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

lpV35ProceduralStatus 1.3.6.1.4.1.562.2.4.1.12.9.15.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpV35ControlStatus 1.3.6.1.4.1.562.2.4.1.12.9.15.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpV35AlarmStatus 1.3.6.1.4.1.562.2.4.1.12.9.15.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpV35StandbyStatus 1.3.6.1.4.1.562.2.4.1.12.9.15.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

lpV35UnknownStatus 1.3.6.1.4.1.562.2.4.1.12.9.15.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

lpV35OperTable 1.3.6.1.4.1.562.2.4.1.12.9.16
This group contains all specific operational data for a V35 component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpV35OperEntry

lpV35OperEntry 1.3.6.1.4.1.562.2.4.1.12.9.16.1
An entry in the lpV35OperTable.
OBJECT-TYPE    
  LpV35OperEntry  

lpV35ActualLinkMode 1.3.6.1.4.1.562.2.4.1.12.9.16.1.1
This attribute contains the actual link mode defined by the hardware. Note that the hardware overrides the provisionable data. The interface behaves as a DCE or DTE according to the actualLinkMode.
OBJECT-TYPE    
  INTEGER dte(0), dce(128)  

lpV35LineState 1.3.6.1.4.1.562.2.4.1.12.9.16.1.2
This attribute contains the current state of the interface signals. Description of bits: rfs(0) dsr(1) dcd(2) rts(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpV35ActualTxLineSpeed 1.3.6.1.4.1.562.2.4.1.12.9.16.1.3
This attribute is the measured speed of the transmit clock.
OBJECT-TYPE    
  Gauge32 0..4294967295  

lpV35ActualRxLineSpeed 1.3.6.1.4.1.562.2.4.1.12.9.16.1.4
This attribute is the measured speed of the receive clock.
OBJECT-TYPE    
  Gauge32 0..4294967295  

lpV35DataXferStateChanges 1.3.6.1.4.1.562.2.4.1.12.9.16.1.5
This attribute contains the number of times that the line has entered or exited the data transfer state.
OBJECT-TYPE    
  Counter32  

lpX21 1.3.6.1.4.1.562.2.4.1.12.10
OBJECT IDENTIFIER    

lpX21RowStatusTable 1.3.6.1.4.1.562.2.4.1.12.10.1
This entry controls the addition and deletion of lpX21 components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpX21RowStatusEntry

lpX21RowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.10.1.1
A single entry in the table represents a single lpX21 component.
OBJECT-TYPE    
  LpX21RowStatusEntry  

lpX21RowStatus 1.3.6.1.4.1.562.2.4.1.12.10.1.1.1
This variable is used as the basis for SNMP naming of lpX21 components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

lpX21ComponentName 1.3.6.1.4.1.562.2.4.1.12.10.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpX21StorageType 1.3.6.1.4.1.562.2.4.1.12.10.1.1.4
This variable represents the storage type value for the lpX21 tables.
OBJECT-TYPE    
  StorageType  

lpX21Index 1.3.6.1.4.1.562.2.4.1.12.10.1.1.10
This variable represents the index for the lpX21 tables.
OBJECT-TYPE    
  Integer32 0..7  

lpX21Test 1.3.6.1.4.1.562.2.4.1.12.10.2
OBJECT IDENTIFIER    

lpX21TestRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.10.2.1
This entry controls the addition and deletion of lpX21Test components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpX21TestRowStatusEntry

lpX21TestRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.10.2.1.1
A single entry in the table represents a single lpX21Test component.
OBJECT-TYPE    
  LpX21TestRowStatusEntry  

lpX21TestRowStatus 1.3.6.1.4.1.562.2.4.1.12.10.2.1.1.1
This variable is used as the basis for SNMP naming of lpX21Test components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpX21TestComponentName 1.3.6.1.4.1.562.2.4.1.12.10.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpX21TestStorageType 1.3.6.1.4.1.562.2.4.1.12.10.2.1.1.4
This variable represents the storage type value for the lpX21Test tables.
OBJECT-TYPE    
  StorageType  

lpX21TestIndex 1.3.6.1.4.1.562.2.4.1.12.10.2.1.1.10
This variable represents the index for the lpX21Test tables.
OBJECT-TYPE    
  NonReplicated  

lpX21TestStateTable 1.3.6.1.4.1.562.2.4.1.12.10.2.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpX21TestStateEntry

lpX21TestStateEntry 1.3.6.1.4.1.562.2.4.1.12.10.2.10.1
An entry in the lpX21TestStateTable.
OBJECT-TYPE    
  LpX21TestStateEntry  

lpX21TestAdminState 1.3.6.1.4.1.562.2.4.1.12.10.2.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpX21TestOperationalState 1.3.6.1.4.1.562.2.4.1.12.10.2.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpX21TestUsageState 1.3.6.1.4.1.562.2.4.1.12.10.2.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpX21TestSetupTable 1.3.6.1.4.1.562.2.4.1.12.10.2.11
This group contains all of the operational data for a Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpX21TestSetupEntry

lpX21TestSetupEntry 1.3.6.1.4.1.562.2.4.1.12.10.2.11.1
An entry in the lpX21TestSetupTable.
OBJECT-TYPE    
  LpX21TestSetupEntry  

lpX21TestPurpose 1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.1
This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
OBJECT-TYPE    
  AsciiString SIZE(0..40)  

lpX21TestType 1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.2
This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
OBJECT-TYPE    
  INTEGER card(0), manual(1), localLoop(2), remoteLoop(3), externalLoop(4), payloadLoop(5), remoteLoopThisTrib(6), v54RemoteLoop(7), pn127RemoteLoop(8)  

lpX21TestFrmSize 1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.3
This attribute defines the size of the test data frames in number of bytes.
OBJECT-TYPE    
  Unsigned32 4..4096  

lpX21TestFrmPatternType 1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.4
This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
OBJECT-TYPE    
  INTEGER ccitt32kBitPattern(0), ccitt8MBitPattern(1), customizedPattern(2)  

lpX21TestCustomizedPattern 1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.5
This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
OBJECT-TYPE    
  Hex 0..4294967295  

lpX21TestDataStartDelay 1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.6
This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
OBJECT-TYPE    
  Unsigned32 0..1814400  

lpX21TestDisplayInterval 1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.7
This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
OBJECT-TYPE    
  Unsigned32 0..30240  

lpX21TestDuration 1.3.6.1.4.1.562.2.4.1.12.10.2.11.1.8
This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
OBJECT-TYPE    
  Unsigned32 1..30240  

lpX21TestResultsTable 1.3.6.1.4.1.562.2.4.1.12.10.2.12
This group contains all the statistics related attributes of the Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpX21TestResultsEntry

lpX21TestResultsEntry 1.3.6.1.4.1.562.2.4.1.12.10.2.12.1
An entry in the lpX21TestResultsTable.
OBJECT-TYPE    
  LpX21TestResultsEntry  

lpX21TestElapsedTime 1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.1
This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
OBJECT-TYPE    
  Counter32  

lpX21TestTimeRemaining 1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.2
This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

lpX21TestCauseOfTermination 1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.3
This attribute records the reason the test is terminated.
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4), hardwareReconfigured(5)  

lpX21TestBitsTx 1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.4
This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpX21TestBytesTx 1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.5
This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpX21TestFrmTx 1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.6
This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpX21TestBitsRx 1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.7
This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpX21TestBytesRx 1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.8
This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpX21TestFrmRx 1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.9
This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpX21TestErroredFrmRx 1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.10
This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
OBJECT-TYPE    
  PassportCounter64  

lpX21TestBitErrorRate 1.3.6.1.4.1.562.2.4.1.12.10.2.12.1.11
This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
OBJECT-TYPE    
  AsciiString SIZE(5)  

lpX21ProvTable 1.3.6.1.4.1.562.2.4.1.12.10.10
This group contains all specific provisioning data for an X21 component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpX21ProvEntry

lpX21ProvEntry 1.3.6.1.4.1.562.2.4.1.12.10.10.1
An entry in the lpX21ProvTable.
OBJECT-TYPE    
  LpX21ProvEntry  

lpX21LinkMode 1.3.6.1.4.1.562.2.4.1.12.10.10.1.1
This attribute defines the intended gender of the X21 component (V.11 interface). The actual gender of the interface is determined by the physical connection to the patch panel. If the hardware setup does not match this attribute, an alarm will be generated. In dte mode, the control line signal is driven as specified by the attribute readyLineState when the interface passes its initial diagnostics. Then, the control line signal will be driven as specified in the attribute dataTransferLineState when the application is ready to transfer data. On the other hand, the input line signal (indication) is compared against those specified in the attributes readyLineState and dataTransferLineState. The application will be notified when the specified line states are observed. In dce mode, the X21 component behaves similarly as when it is in dte mode. However, it will be driving the DCE line signal (control) and monitoring the DTE line signal (indication) as specified by the attributes readyLineState and dataTransferLineState.
OBJECT-TYPE    
  INTEGER dte(0), dce(128)  

lpX21ReadyLineState 1.3.6.1.4.1.562.2.4.1.12.10.10.1.2
This attribute specifies the line signals originating from the V.11 interface that will always be turned on, provided the interface passes its diagnostics. This set of signals is generally required to maintain the connection. Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. See also linkMode. Description of bits: indication(0) control(1)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpX21DataTransferLineState 1.3.6.1.4.1.562.2.4.1.12.10.10.1.3
The state of the line signals required to indicate that the external equipment is in a good state (that is, data transfer can proceed). Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. The value of this attribute must be a superset of that of the readyLineState attribute. See also linkMode. Description of bits: indication(0) control(1)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpX21LineStatusTimeOut 1.3.6.1.4.1.562.2.4.1.12.10.10.1.4
This attribute defines the time the line state must be stable (good or bad) before a state change is declared.
OBJECT-TYPE    
  Unsigned32 10..20000  

lpX21LineSpeed 1.3.6.1.4.1.562.2.4.1.12.10.10.1.5
This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a clock. The clock rate is rounded up to the nearest available value. Note that the actual clock rates are available in the operational attributes actualTxLineSpeed and actualRxLineSpeed. The actual lineSpeeds configurable on a V.11 DCE interface are: 7680000, 3840000, 2560000, 2048000, 1920000, 1536000, 1344000, 1280000, 1024000, 960000, 768000, 672000, 640000, 512000, 448000, 384000, 336000, 320000, 256000, 224000, 192000, 168000, 128000, 112000, 64000, 56000, 48000, 32000, 19200, 9600. Note that linspeeds of 1024000 and 2048000 cannot be provisioned on cards that have ports provisioned at 3840000, 2560000, 1920000, 1280000, 960000, 640000 or 320000. DESCRIPTION
OBJECT-TYPE    
  Unsigned32 9600..7680000  

lpX21ClockingSource 1.3.6.1.4.1.562.2.4.1.12.10.10.1.6
This attribute defines the source of synchronization of the outgoing clocks. This attribute is only used when the actualLinkMode is dce. If the value of the attribute is local, the outgoing clocks are synchronized to a local oscillator on the FP. If the value of the attribute is module, the outgoing clocks are synchronized to the oscillator on the active CP.
OBJECT-TYPE    
  INTEGER local(0), module(1)  

lpX21DteDataClockSource 1.3.6.1.4.1.562.2.4.1.12.10.10.1.7
This attribute is only used when the actualLinkMode is dce. It is used to determine the clock to be used to recover the receive data. Note that a V.11 DTE interface uses the S clock (see X.21 standard) for both receive data and transmit data timing. The DTE interface always loops the received S clock back to the DCE as the X clock (see X.21 standard). If the value of the attribute is fromDce, the DCE V.11 interface uses the internally generated transmit clock as the S clock and for both receive and transmit data timing. The X clock is ignored. If the value of the attribute is fromDte, the DCE still uses the internally generated transmit clock as the S clock and for transmit data timing, but the receive data timing is derived from the X clock. The fromDte mode is recommended when the DTE is far away from the DCE interface.
OBJECT-TYPE    
  INTEGER fromDce(0), fromDte(2)  

lpX21LineTerminationRequired 1.3.6.1.4.1.562.2.4.1.12.10.10.1.8
This attribute specifies whether termination is required for this interface. If the hardware setup does not match this attribute, an alarm will be generated.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

lpX21ApplicationFramerName 1.3.6.1.4.1.562.2.4.1.12.10.10.1.9
This attribute contains the component name of a Framer which is associated with the X21 component.
OBJECT-TYPE    
  Link  

lpX21EnableDynamicSpeed 1.3.6.1.4.1.562.2.4.1.12.10.10.1.10
When set to yes, this attribute specifies that the transmit link speed should be set to the calculated receiver link speed. This attribute can be set to yes only if the linkMode is dce and the dteDataClockSource is fromDte..
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

lpX21CidDataTable 1.3.6.1.4.1.562.2.4.1.12.10.11
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    LpX21CidDataEntry

lpX21CidDataEntry 1.3.6.1.4.1.562.2.4.1.12.10.11.1
An entry in the lpX21CidDataTable.
OBJECT-TYPE    
  LpX21CidDataEntry  

lpX21CustomerIdentifier 1.3.6.1.4.1.562.2.4.1.12.10.11.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

lpX21AdminInfoTable 1.3.6.1.4.1.562.2.4.1.12.10.12
This group contains the attributes pertaining to the vendor of the equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    LpX21AdminInfoEntry

lpX21AdminInfoEntry 1.3.6.1.4.1.562.2.4.1.12.10.12.1
An entry in the lpX21AdminInfoTable.
OBJECT-TYPE    
  LpX21AdminInfoEntry  

lpX21Vendor 1.3.6.1.4.1.562.2.4.1.12.10.12.1.1
This is the name of the vendor supplying the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..20)  

lpX21CommentText 1.3.6.1.4.1.562.2.4.1.12.10.12.1.2
Any miscellaneous text about the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..60)  

lpX21IfEntryTable 1.3.6.1.4.1.562.2.4.1.12.10.13
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    LpX21IfEntryEntry

lpX21IfEntryEntry 1.3.6.1.4.1.562.2.4.1.12.10.13.1
An entry in the lpX21IfEntryTable.
OBJECT-TYPE    
  LpX21IfEntryEntry  

lpX21IfAdminStatus 1.3.6.1.4.1.562.2.4.1.12.10.13.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpX21IfIndex 1.3.6.1.4.1.562.2.4.1.12.10.13.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

lpX21OperStatusTable 1.3.6.1.4.1.562.2.4.1.12.10.14
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpX21OperStatusEntry

lpX21OperStatusEntry 1.3.6.1.4.1.562.2.4.1.12.10.14.1
An entry in the lpX21OperStatusTable.
OBJECT-TYPE    
  LpX21OperStatusEntry  

lpX21SnmpOperStatus 1.3.6.1.4.1.562.2.4.1.12.10.14.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpX21StateTable 1.3.6.1.4.1.562.2.4.1.12.10.15
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpX21StateEntry

lpX21StateEntry 1.3.6.1.4.1.562.2.4.1.12.10.15.1
An entry in the lpX21StateTable.
OBJECT-TYPE    
  LpX21StateEntry  

lpX21AdminState 1.3.6.1.4.1.562.2.4.1.12.10.15.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpX21OperationalState 1.3.6.1.4.1.562.2.4.1.12.10.15.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpX21UsageState 1.3.6.1.4.1.562.2.4.1.12.10.15.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpX21AvailabilityStatus 1.3.6.1.4.1.562.2.4.1.12.10.15.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

lpX21ProceduralStatus 1.3.6.1.4.1.562.2.4.1.12.10.15.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpX21ControlStatus 1.3.6.1.4.1.562.2.4.1.12.10.15.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpX21AlarmStatus 1.3.6.1.4.1.562.2.4.1.12.10.15.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpX21StandbyStatus 1.3.6.1.4.1.562.2.4.1.12.10.15.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

lpX21UnknownStatus 1.3.6.1.4.1.562.2.4.1.12.10.15.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

lpX21OperTable 1.3.6.1.4.1.562.2.4.1.12.10.16
This group contains all specific operational data for an X21 component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpX21OperEntry

lpX21OperEntry 1.3.6.1.4.1.562.2.4.1.12.10.16.1
An entry in the lpX21OperTable.
OBJECT-TYPE    
  LpX21OperEntry  

lpX21ActualLinkMode 1.3.6.1.4.1.562.2.4.1.12.10.16.1.1
This attribute contains the actual link mode defined by the hardware. Note that the hardware overrides the provisionable data. The interface behaves as a DCE or DTE according to the actualLinkMode.
OBJECT-TYPE    
  INTEGER dte(0), dce(128)  

lpX21LineState 1.3.6.1.4.1.562.2.4.1.12.10.16.1.2
This attribute contains the current state of the interface signals. Description of bits: indication(0) control(1)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpX21ActualTxLineSpeed 1.3.6.1.4.1.562.2.4.1.12.10.16.1.3
This attribute is the measured speed of the transmit clock.
OBJECT-TYPE    
  Gauge32 0..4294967295  

lpX21ActualRxLineSpeed 1.3.6.1.4.1.562.2.4.1.12.10.16.1.4
This attribute is the measured speed of the receive clock.
OBJECT-TYPE    
  Gauge32 0..4294967295  

lpX21DataXferStateChanges 1.3.6.1.4.1.562.2.4.1.12.10.16.1.5
This attribute contains the number of times that the line has entered or exited the data transfer state.
OBJECT-TYPE    
  Counter32  

lpSonet 1.3.6.1.4.1.562.2.4.1.12.14
OBJECT IDENTIFIER    

lpSonetRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.14.1
This entry controls the addition and deletion of lpSonet components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSonetRowStatusEntry

lpSonetRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.14.1.1
A single entry in the table represents a single lpSonet component.
OBJECT-TYPE    
  LpSonetRowStatusEntry  

lpSonetRowStatus 1.3.6.1.4.1.562.2.4.1.12.14.1.1.1
This variable is used as the basis for SNMP naming of lpSonet components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

lpSonetComponentName 1.3.6.1.4.1.562.2.4.1.12.14.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpSonetStorageType 1.3.6.1.4.1.562.2.4.1.12.14.1.1.4
This variable represents the storage type value for the lpSonet tables.
OBJECT-TYPE    
  StorageType  

lpSonetIndex 1.3.6.1.4.1.562.2.4.1.12.14.1.1.10
This variable represents the index for the lpSonet tables.
OBJECT-TYPE    
  Integer32 0..2  

lpSonetPath 1.3.6.1.4.1.562.2.4.1.12.14.2
OBJECT IDENTIFIER    

lpSonetPathRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.14.2.1
This entry controls the addition and deletion of lpSonetPath components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSonetPathRowStatusEntry

lpSonetPathRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.14.2.1.1
A single entry in the table represents a single lpSonetPath component.
OBJECT-TYPE    
  LpSonetPathRowStatusEntry  

lpSonetPathRowStatus 1.3.6.1.4.1.562.2.4.1.12.14.2.1.1.1
This variable is used as the basis for SNMP naming of lpSonetPath components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

lpSonetPathComponentName 1.3.6.1.4.1.562.2.4.1.12.14.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpSonetPathStorageType 1.3.6.1.4.1.562.2.4.1.12.14.2.1.1.4
This variable represents the storage type value for the lpSonetPath tables.
OBJECT-TYPE    
  StorageType  

lpSonetPathIndex 1.3.6.1.4.1.562.2.4.1.12.14.2.1.1.10
This variable represents the index for the lpSonetPath tables.
OBJECT-TYPE    
  Integer32 0..0  

lpSonetPathCell 1.3.6.1.4.1.562.2.4.1.12.14.2.2
OBJECT IDENTIFIER    

lpSonetPathCellRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.14.2.2.1
This entry controls the addition and deletion of lpSonetPathCell components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSonetPathCellRowStatusEntry

lpSonetPathCellRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.14.2.2.1.1
A single entry in the table represents a single lpSonetPathCell component.
OBJECT-TYPE    
  LpSonetPathCellRowStatusEntry  

lpSonetPathCellRowStatus 1.3.6.1.4.1.562.2.4.1.12.14.2.2.1.1.1
This variable is used as the basis for SNMP naming of lpSonetPathCell components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpSonetPathCellComponentName 1.3.6.1.4.1.562.2.4.1.12.14.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpSonetPathCellStorageType 1.3.6.1.4.1.562.2.4.1.12.14.2.2.1.1.4
This variable represents the storage type value for the lpSonetPathCell tables.
OBJECT-TYPE    
  StorageType  

lpSonetPathCellIndex 1.3.6.1.4.1.562.2.4.1.12.14.2.2.1.1.10
This variable represents the index for the lpSonetPathCell tables.
OBJECT-TYPE    
  NonReplicated  

lpSonetPathCellProvTable 1.3.6.1.4.1.562.2.4.1.12.14.2.2.10
This group contains the provisioning attributes for the AtmCell component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSonetPathCellProvEntry

lpSonetPathCellProvEntry 1.3.6.1.4.1.562.2.4.1.12.14.2.2.10.1
An entry in the lpSonetPathCellProvTable.
OBJECT-TYPE    
  LpSonetPathCellProvEntry  

lpSonetPathCellAlarmActDelay 1.3.6.1.4.1.562.2.4.1.12.14.2.2.10.1.1
This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
OBJECT-TYPE    
  Unsigned32 0..2000  

lpSonetPathCellScrambleCellPayload 1.3.6.1.4.1.562.2.4.1.12.14.2.2.10.1.2
Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

lpSonetPathCellCorrectSingleBitHeaderErrors 1.3.6.1.4.1.562.2.4.1.12.14.2.2.10.1.3
This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

lpSonetPathCellOperTable 1.3.6.1.4.1.562.2.4.1.12.14.2.2.11
This group contains the common operational attributes for the AtmCell component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSonetPathCellOperEntry

lpSonetPathCellOperEntry 1.3.6.1.4.1.562.2.4.1.12.14.2.2.11.1
An entry in the lpSonetPathCellOperTable.
OBJECT-TYPE    
  LpSonetPathCellOperEntry  

lpSonetPathCellLcdAlarm 1.3.6.1.4.1.562.2.4.1.12.14.2.2.11.1.1
This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpSonetPathCellStatsTable 1.3.6.1.4.1.562.2.4.1.12.14.2.2.12
This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSonetPathCellStatsEntry

lpSonetPathCellStatsEntry 1.3.6.1.4.1.562.2.4.1.12.14.2.2.12.1
An entry in the lpSonetPathCellStatsTable.
OBJECT-TYPE    
  LpSonetPathCellStatsEntry  

lpSonetPathCellUncorrectableHecErrors 1.3.6.1.4.1.562.2.4.1.12.14.2.2.12.1.1
This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
OBJECT-TYPE    
  Counter32  

lpSonetPathCellSevErroredSec 1.3.6.1.4.1.562.2.4.1.12.14.2.2.12.1.2
This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
OBJECT-TYPE    
  Counter32  

lpSonetPathCellReceiveCellUtilization 1.3.6.1.4.1.562.2.4.1.12.14.2.2.12.1.3
This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  Gauge32 0..100  

lpSonetPathCellTransmitCellUtilization 1.3.6.1.4.1.562.2.4.1.12.14.2.2.12.1.4
This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  Gauge32 0..100  

lpSonetPathCellCorrectableHeaderErrors 1.3.6.1.4.1.562.2.4.1.12.14.2.2.12.1.5
This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
OBJECT-TYPE    
  Counter32  

lpSonetPathProvTable 1.3.6.1.4.1.562.2.4.1.12.14.2.10
This group contains all of the provisioning data for a Sonet/Sdh Path component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSonetPathProvEntry

lpSonetPathProvEntry 1.3.6.1.4.1.562.2.4.1.12.14.2.10.1
An entry in the lpSonetPathProvTable.
OBJECT-TYPE    
  LpSonetPathProvEntry  

lpSonetPathApplicationFramerName 1.3.6.1.4.1.562.2.4.1.12.14.2.10.1.1
This attribute defines the link to the software stack. It defines which application is running on top of the Path component.
OBJECT-TYPE    
  Link  

lpSonetPathCidDataTable 1.3.6.1.4.1.562.2.4.1.12.14.2.11
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSonetPathCidDataEntry

lpSonetPathCidDataEntry 1.3.6.1.4.1.562.2.4.1.12.14.2.11.1
An entry in the lpSonetPathCidDataTable.
OBJECT-TYPE    
  LpSonetPathCidDataEntry  

lpSonetPathCustomerIdentifier 1.3.6.1.4.1.562.2.4.1.12.14.2.11.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

lpSonetPathStateTable 1.3.6.1.4.1.562.2.4.1.12.14.2.12
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSonetPathStateEntry

lpSonetPathStateEntry 1.3.6.1.4.1.562.2.4.1.12.14.2.12.1
An entry in the lpSonetPathStateTable.
OBJECT-TYPE    
  LpSonetPathStateEntry  

lpSonetPathAdminState 1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpSonetPathOperationalState 1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpSonetPathUsageState 1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpSonetPathAvailabilityStatus 1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

lpSonetPathProceduralStatus 1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpSonetPathControlStatus 1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpSonetPathAlarmStatus 1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpSonetPathStandbyStatus 1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

lpSonetPathUnknownStatus 1.3.6.1.4.1.562.2.4.1.12.14.2.12.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

lpSonetPathIfEntryTable 1.3.6.1.4.1.562.2.4.1.12.14.2.13
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSonetPathIfEntryEntry

lpSonetPathIfEntryEntry 1.3.6.1.4.1.562.2.4.1.12.14.2.13.1
An entry in the lpSonetPathIfEntryTable.
OBJECT-TYPE    
  LpSonetPathIfEntryEntry  

lpSonetPathIfAdminStatus 1.3.6.1.4.1.562.2.4.1.12.14.2.13.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpSonetPathIfIndex 1.3.6.1.4.1.562.2.4.1.12.14.2.13.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

lpSonetPathOperStatusTable 1.3.6.1.4.1.562.2.4.1.12.14.2.14
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSonetPathOperStatusEntry

lpSonetPathOperStatusEntry 1.3.6.1.4.1.562.2.4.1.12.14.2.14.1
An entry in the lpSonetPathOperStatusTable.
OBJECT-TYPE    
  LpSonetPathOperStatusEntry  

lpSonetPathSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.12.14.2.14.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpSonetPathOperTable 1.3.6.1.4.1.562.2.4.1.12.14.2.15
This group contains the common operational data for Path component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSonetPathOperEntry

lpSonetPathOperEntry 1.3.6.1.4.1.562.2.4.1.12.14.2.15.1
An entry in the lpSonetPathOperTable.
OBJECT-TYPE    
  LpSonetPathOperEntry  

lpSonetPathLopAlarm 1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.1
This attribute displays whether a Loss Of Pointer (LOP) alarm state has been entered. An LOP alarm state is entered when LOP defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOP defect occurs when no valid SPE or VC pointer was received in 8 contiguous frames. If the LOP defects are intermittently occurring, the LOP defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the LOP alarm condition is cleared. The condition is cleared when no more invalid pointer has been reported for 10 seconds +/- 0.5 seconds. The lopAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpSonetPathRxAisAlarm 1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.2
This attribute displays whether an Path Alarm Indication Signal (P- AIS) alarm state has been entered. An P-AIS alarm state is entered when P-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-AIS defect is the occurrence of the P-AIS signal in three contiguous valid STS or STM frames (all one's in bytes H1 and H2). If the P-AIS defects are intermittently occurring, the P-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-AIS alarm condition is cleared. The condition is cleared after no P-AIS defect has been detected for 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpSonetPathRxRfiAlarm 1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.3
This attribute displays whether the Path Remote Failure Indication (P-RFI) alarm state has been entered. An P-RFI alarm state is entered when Path Remote Defect Indicator (P-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-RDI defect is the occurrence of the P-RDI signal in five contiguous valid STS or STM frames (bit 5 of the G1 byte set to 1). If the P-RDI defects are intermittently occurring, the P-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10)with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-RFI alarm condition is cleared. The condition is cleared after no P-RDI defect has been detected for 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpSonetPathSignalLabelMismatch 1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.4
This attribute displays whether the Path Signal Label Mismatch (P- SLM) failure condition has been entered. An P-SLM failure condition is entered when P-SLM defects have been observed and accumulated for period of 2.5 seconds +/- 0.5 seconds. An P-SLM defect occurs when detecting an unexpected path signal label. The expected Path signal labels are 'Mapping for ATM' or 'Equipped - Non Specific Payload'. If the P-SLM defects are intermittently occurring, the P-SLM defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the Path Signal Label Mismatch failure condition is cleared. The condition is cleared when an expected path signal label is received for 10 seconds +/- 0.5 seconds. The signalLabelMismatch attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpSonetPathTxAis 1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.5
This attribute displays whether the Path Alarm Indication Signal (P- AIS) signal is being transmitted on the path. The P-AIS signal is transmitted when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpSonetPathTxRdi 1.3.6.1.4.1.562.2.4.1.12.14.2.15.1.6
This attribute displays whether the Path Remote Defect Indicator (P-RDI) signal is being transmitted over the path signal. The P-RDI signal is transmitted over the outgoing line upon detection of LOP, P-AIS or the occurrence of the LCD state. This attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpSonetPathStatsTable 1.3.6.1.4.1.562.2.4.1.12.14.2.16
This group contains the statistics data for a Sonet/Sdh Path component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSonetPathStatsEntry

lpSonetPathStatsEntry 1.3.6.1.4.1.562.2.4.1.12.14.2.16.1
An entry in the lpSonetPathStatsTable.
OBJECT-TYPE    
  LpSonetPathStatsEntry  

lpSonetPathPathErrorFreeSec 1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.1
This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an near-end error free state.
OBJECT-TYPE    
  Counter32  

lpSonetPathPathCodeViolations 1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.2
This attribute indicates the total number of Path Code Violations (PCVs) detected. Each PCV corresponds to a path BIP-8 error. PCV counting is inhibited over second intervals where a Path Severely Errored Second (PSES) is counted. Counting of PCVs is also inhibited over second intervals where a Path Unavailable Second (PUAS) is counted. The count wraps at its maximum value.
OBJECT-TYPE    
  Counter32  

lpSonetPathPathErroredSec 1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.3
This attribute indicates the total number of Path Errored Seconds (PESs) that have been counted. A PES is declared for second intervals containing one or more PCVs or one or more LOP or path AIS defects. Counting of PES is inhibited when PUAS is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

lpSonetPathPathSevErroredSec 1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.4
This attribute indicates the total number of Path Severely Errored Seconds (PSESs) that have been counted. A PSES is declared for second intervals containing more than x PCVs or one or more LOP or path AIS defects. The value of x is 2400 for a 155 Mbits/sec interface. Counting of PSES is inhibited when PUAS is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

lpSonetPathPathAisLopSec 1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.5
This attribute indicates the total number of path AIS and LOP Seconds (PALSs). A PALS is declared for second intervals containing one or more path AIS or LOP defects. Counting of PALS is inhibited when PUAS is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

lpSonetPathPathUnavailSec 1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.6
This attribute indicates the total number of one second intervals for which the STS/STM path is unavailable. The path becomes unavailable at the onset of 10 consecutive PSESs. The 10 PSESs are included in the unavailable time. Once unavailable, the path becomes available at the onset of 10 contiguous seconds with no PSES. The 10 seconds with no PSES are excluded from the unavailable time. For second intervals where a Path Unavailable Second (PUAS) is counted, counting of PCV, PES, PSES and PALS is inhibited.
OBJECT-TYPE    
  Counter32  

lpSonetPathPathFailures 1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.7
This attribute indicates the total number of times that a path failure (LOP, P-AIS or Path Signal Label Mismatch failure) has been declared.
OBJECT-TYPE    
  Counter32  

lpSonetPathFarEndPathErrorFreeSec 1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.8
This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an far-end error free state.
OBJECT-TYPE    
  Counter32  

lpSonetPathFarEndPathCodeViolations 1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.9
This attribute indicates the total number of Far-End Path Code Violations (FEPCVs) detected. Each FEPCV corresponds to a path FEBE. FEPCV counting is inhibited over second intervals where a Far-End Path Severely Errored Second (FEPSES) is counted. Counting of PCVs is also inhibited over second intervals where a Far-End Path Unavailable Second (FEPUAS) is counted. The count wraps at its maximum value.
OBJECT-TYPE    
  Counter32  

lpSonetPathFarEndPathErroredSec 1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.10
This attribute indicates the total number of Far-End Path Errored Seconds (FEPESs) that have been counted. A FEPES is declared for second intervals containing one or more FEPCVs or one or more path RDI (P-RDI) defects. Counting of FEPES is inhibited when FEPUAS is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

lpSonetPathFarEndPathSevErroredSec 1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.11
This attribute indicates the total number of Far-End Path Severely Errored Seconds (FEPSESs) that have been counted. A FEPSES is declared for second intervals containing more than x FEPCVs or one or more P-RDI defects. The value of x is 2400 for a 155 Mbits/ sec interface. Counting of FEPSESs is inhibited when FEPUAS is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

lpSonetPathFarEndPathAisLopSec 1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.12
This attribute indicates the total number of Far-End Path AIS and LOP Seconds (FEPALSs). A FEPALS is declared for second intervals containing one or more P-RDI defects. Counting of FEPALS is inhibited when FEPUAS is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

lpSonetPathFarEndPathUnavailSec 1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.13
This attribute indicates the total number of one second intervals for which the STS/STM far-end path is unavailable. The far-end path becomes unavailable at the onset of 10 consecutive FEPSESs. The 10 FEPSESs are included in the unavailable time. Once unavailable, the far-end path becomes available at the onset of 10 contiguous seconds with no FEPSES. The 10 seconds with no FEPSES are excluded from the unavailable time. For second intervals where a Far-End Path Unavailable Second (FEPUAS) is counted, counting of FEPCV, FEPES, FEPSES and FEPALS is inhibited.
OBJECT-TYPE    
  Counter32  

lpSonetPathFarEndPathFailures 1.3.6.1.4.1.562.2.4.1.12.14.2.16.1.14
This attribute indicates the total number of times that a STS/STM far-end path failure (P-RFI failure) has been declared.
OBJECT-TYPE    
  Counter32  

lpSonetTest 1.3.6.1.4.1.562.2.4.1.12.14.3
OBJECT IDENTIFIER    

lpSonetTestRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.14.3.1
This entry controls the addition and deletion of lpSonetTest components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSonetTestRowStatusEntry

lpSonetTestRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.14.3.1.1
A single entry in the table represents a single lpSonetTest component.
OBJECT-TYPE    
  LpSonetTestRowStatusEntry  

lpSonetTestRowStatus 1.3.6.1.4.1.562.2.4.1.12.14.3.1.1.1
This variable is used as the basis for SNMP naming of lpSonetTest components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpSonetTestComponentName 1.3.6.1.4.1.562.2.4.1.12.14.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpSonetTestStorageType 1.3.6.1.4.1.562.2.4.1.12.14.3.1.1.4
This variable represents the storage type value for the lpSonetTest tables.
OBJECT-TYPE    
  StorageType  

lpSonetTestIndex 1.3.6.1.4.1.562.2.4.1.12.14.3.1.1.10
This variable represents the index for the lpSonetTest tables.
OBJECT-TYPE    
  NonReplicated  

lpSonetTestStateTable 1.3.6.1.4.1.562.2.4.1.12.14.3.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSonetTestStateEntry

lpSonetTestStateEntry 1.3.6.1.4.1.562.2.4.1.12.14.3.10.1
An entry in the lpSonetTestStateTable.
OBJECT-TYPE    
  LpSonetTestStateEntry  

lpSonetTestAdminState 1.3.6.1.4.1.562.2.4.1.12.14.3.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpSonetTestOperationalState 1.3.6.1.4.1.562.2.4.1.12.14.3.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpSonetTestUsageState 1.3.6.1.4.1.562.2.4.1.12.14.3.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpSonetTestSetupTable 1.3.6.1.4.1.562.2.4.1.12.14.3.11
This group contains all of the operational data for a Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSonetTestSetupEntry

lpSonetTestSetupEntry 1.3.6.1.4.1.562.2.4.1.12.14.3.11.1
An entry in the lpSonetTestSetupTable.
OBJECT-TYPE    
  LpSonetTestSetupEntry  

lpSonetTestPurpose 1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.1
This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
OBJECT-TYPE    
  AsciiString SIZE(0..40)  

lpSonetTestType 1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.2
This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
OBJECT-TYPE    
  INTEGER card(0), manual(1), localLoop(2), remoteLoop(3), externalLoop(4), payloadLoop(5), remoteLoopThisTrib(6), v54RemoteLoop(7), pn127RemoteLoop(8)  

lpSonetTestFrmSize 1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.3
This attribute defines the size of the test data frames in number of bytes.
OBJECT-TYPE    
  Unsigned32 4..4096  

lpSonetTestFrmPatternType 1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.4
This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
OBJECT-TYPE    
  INTEGER ccitt32kBitPattern(0), ccitt8MBitPattern(1), customizedPattern(2)  

lpSonetTestCustomizedPattern 1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.5
This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
OBJECT-TYPE    
  Hex 0..4294967295  

lpSonetTestDataStartDelay 1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.6
This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
OBJECT-TYPE    
  Unsigned32 0..1814400  

lpSonetTestDisplayInterval 1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.7
This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
OBJECT-TYPE    
  Unsigned32 0..30240  

lpSonetTestDuration 1.3.6.1.4.1.562.2.4.1.12.14.3.11.1.8
This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
OBJECT-TYPE    
  Unsigned32 1..30240  

lpSonetTestResultsTable 1.3.6.1.4.1.562.2.4.1.12.14.3.12
This group contains all the statistics related attributes of the Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSonetTestResultsEntry

lpSonetTestResultsEntry 1.3.6.1.4.1.562.2.4.1.12.14.3.12.1
An entry in the lpSonetTestResultsTable.
OBJECT-TYPE    
  LpSonetTestResultsEntry  

lpSonetTestElapsedTime 1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.1
This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
OBJECT-TYPE    
  Counter32  

lpSonetTestTimeRemaining 1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.2
This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

lpSonetTestCauseOfTermination 1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.3
This attribute records the reason the test is terminated.
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4), hardwareReconfigured(5)  

lpSonetTestBitsTx 1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.4
This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpSonetTestBytesTx 1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.5
This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpSonetTestFrmTx 1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.6
This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpSonetTestBitsRx 1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.7
This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpSonetTestBytesRx 1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.8
This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpSonetTestFrmRx 1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.9
This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpSonetTestErroredFrmRx 1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.10
This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
OBJECT-TYPE    
  PassportCounter64  

lpSonetTestBitErrorRate 1.3.6.1.4.1.562.2.4.1.12.14.3.12.1.11
This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
OBJECT-TYPE    
  AsciiString SIZE(5)  

lpSonetProvTable 1.3.6.1.4.1.562.2.4.1.12.14.10
This group contains all of the provisioning data for a Sonet or Sdh component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSonetProvEntry

lpSonetProvEntry 1.3.6.1.4.1.562.2.4.1.12.14.10.1
An entry in the lpSonetProvTable.
OBJECT-TYPE    
  LpSonetProvEntry  

lpSonetClockingSource 1.3.6.1.4.1.562.2.4.1.12.14.10.1.1
This attribute defines the type of clocking source used for synchronizing the OC-3 transmit clock: local means direct use of the local clock oscillator at its centre frequency; line means the use of a signal phase-locked to the incoming OC-3 line rate; module means the use of a signal phase-locked to the CP reference clock. When adding a Sonet/Sdh component, the clockingSource attribute is set to module if the NetworkSynchronization component has been added and is set to local otherwise. Note that the multiport OC-3 cell-based cards has one common clock source for each of the three ports when either the clocking source local or module is selected. For this reason, it is not allowed to have at the same time the clockingSource attribute set to local on one port and module on another port. Furthermore, the clockingSource attribute cannot be set to module if the NetworkSynchronization component has not been added.
OBJECT-TYPE    
  INTEGER local(0), line(1), module(2)  

lpSonetCidDataTable 1.3.6.1.4.1.562.2.4.1.12.14.11
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSonetCidDataEntry

lpSonetCidDataEntry 1.3.6.1.4.1.562.2.4.1.12.14.11.1
An entry in the lpSonetCidDataTable.
OBJECT-TYPE    
  LpSonetCidDataEntry  

lpSonetCustomerIdentifier 1.3.6.1.4.1.562.2.4.1.12.14.11.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

lpSonetAdminInfoTable 1.3.6.1.4.1.562.2.4.1.12.14.12
This group contains the attributes pertaining to the vendor of the equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSonetAdminInfoEntry

lpSonetAdminInfoEntry 1.3.6.1.4.1.562.2.4.1.12.14.12.1
An entry in the lpSonetAdminInfoTable.
OBJECT-TYPE    
  LpSonetAdminInfoEntry  

lpSonetVendor 1.3.6.1.4.1.562.2.4.1.12.14.12.1.1
This is the name of the vendor supplying the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..20)  

lpSonetCommentText 1.3.6.1.4.1.562.2.4.1.12.14.12.1.2
Any miscellaneous text about the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..60)  

lpSonetIfEntryTable 1.3.6.1.4.1.562.2.4.1.12.14.13
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSonetIfEntryEntry

lpSonetIfEntryEntry 1.3.6.1.4.1.562.2.4.1.12.14.13.1
An entry in the lpSonetIfEntryTable.
OBJECT-TYPE    
  LpSonetIfEntryEntry  

lpSonetIfAdminStatus 1.3.6.1.4.1.562.2.4.1.12.14.13.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpSonetIfIndex 1.3.6.1.4.1.562.2.4.1.12.14.13.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

lpSonetOperStatusTable 1.3.6.1.4.1.562.2.4.1.12.14.14
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSonetOperStatusEntry

lpSonetOperStatusEntry 1.3.6.1.4.1.562.2.4.1.12.14.14.1
An entry in the lpSonetOperStatusTable.
OBJECT-TYPE    
  LpSonetOperStatusEntry  

lpSonetSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.12.14.14.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpSonetStateTable 1.3.6.1.4.1.562.2.4.1.12.14.15
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSonetStateEntry

lpSonetStateEntry 1.3.6.1.4.1.562.2.4.1.12.14.15.1
An entry in the lpSonetStateTable.
OBJECT-TYPE    
  LpSonetStateEntry  

lpSonetAdminState 1.3.6.1.4.1.562.2.4.1.12.14.15.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpSonetOperationalState 1.3.6.1.4.1.562.2.4.1.12.14.15.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpSonetUsageState 1.3.6.1.4.1.562.2.4.1.12.14.15.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpSonetAvailabilityStatus 1.3.6.1.4.1.562.2.4.1.12.14.15.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

lpSonetProceduralStatus 1.3.6.1.4.1.562.2.4.1.12.14.15.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpSonetControlStatus 1.3.6.1.4.1.562.2.4.1.12.14.15.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpSonetAlarmStatus 1.3.6.1.4.1.562.2.4.1.12.14.15.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpSonetStandbyStatus 1.3.6.1.4.1.562.2.4.1.12.14.15.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

lpSonetUnknownStatus 1.3.6.1.4.1.562.2.4.1.12.14.15.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

lpSonetOperTable 1.3.6.1.4.1.562.2.4.1.12.14.16
This group contains the common operational data for Sonet or Sdh component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSonetOperEntry

lpSonetOperEntry 1.3.6.1.4.1.562.2.4.1.12.14.16.1
An entry in the lpSonetOperTable.
OBJECT-TYPE    
  LpSonetOperEntry  

lpSonetLosAlarm 1.3.6.1.4.1.562.2.4.1.12.14.16.1.1
This attribute indicates whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds, or if an LOS defect is present when the criteria for LOF failure declaration have been met. A LOS defect is declared when 20+/-3 us of all-zeros pattern is detected. The LOS defect is cleared when two valid framing words are detected and no Loss Of Signal condition is detected during an interval of 20+/-3 us. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the LOS alarm condition is cleared. The LOS alarm state is cleared after LOS defects have been absent for a period of 10 seconds +/- 0.5 seconds. The losAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpSonetLofAlarm 1.3.6.1.4.1.562.2.4.1.12.14.16.1.2
This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when LOF defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds, except when an LOS defect or failure is present. An LOF defect is detected when getting contiguous errored frame alignment for at least 3 msec. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the LOF alarm condition is cleared. The condition is cleared when framing has been achieved for a period of 10 seconds +/- 0.5 seconds. The lofAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpSonetRxAisAlarm 1.3.6.1.4.1.562.2.4.1.12.14.16.1.3
This attribute displays whether a Line Alarm Indication Signal (L- AIS) alarm state has been entered. An L-AIS alarm state is entered when L-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-AIS defect is the occurrence of the L-AIS signal in five contiguous STS (STM) frames (111 pattern in bits 6,7, and 8 of the K2 bytes). If the L-AIS defects are intermittently occurring, the L-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-AIS alarm condition is cleared. The condition is cleared after not detecting the L-AIS signal for a period of 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpSonetRxRfiAlarm 1.3.6.1.4.1.562.2.4.1.12.14.16.1.4
This attribute displays whether a Line Remote Failure Indication (LRFI) alarm state has been entered. An L-RFI alarm state is entered when Line Remote Failure Indication (L-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-RDI defect is the occurrence of the L-RDI signal in five contiguous valid STS (STM) frame (110 pattern in bits 6,7, and 8 of the K2 bytes). If the L-RDI defects are intermittently occurring, the L-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-RFI alarm condition is cleared. The condition is cleared after not detecting the L-RDI signal for a period of 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpSonetTxAis 1.3.6.1.4.1.562.2.4.1.12.14.16.1.5
This attribute displays whether the Line Alarm Indication Signal (L- AIS) signal is being transmitted on the outgoing line. This signal is transmitted when the Sonet/Sdh is locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpSonetTxRdi 1.3.6.1.4.1.562.2.4.1.12.14.16.1.6
This attribute displays whether the Line Remote Defect Indicator (L-RDI) signal is being transmitted over the OC-3 line. The L-RDI signal is transmitted upon the detection of the LOS, LOF or L-AIS defect. This attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpSonetUnusableTxClockRefAlarm 1.3.6.1.4.1.562.2.4.1.12.14.16.1.7
This attribute displays whether an Unusable Transmit Clock Reference (UTCR) alarm state has been entered. A UTCR alarm state is entered when a Sonet/Sdh port provisioned to act as a transmit clock reference has received the code 'do not use for synchronization' in the S1 byte (in the SONET/ SDH line overhead) for 2.5 +/- 0.5 seconds. The condition is cleared after not detecting the 'do not use for synchronization' code for a period of 10 +/- 0.5 seconds or when the port is no longer provisioned to act as a transmit clock reference. A port is acting as a transmit clock reference if it is provisioned with a) a clockingSource of line, or b) it has been provisioned as a primaryReference, secondaryReference or tertiaryReference in the NetworkSynchronization component. The unusableTxClockRefAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpSonetStatsTable 1.3.6.1.4.1.562.2.4.1.12.14.17
This group contains the statistics data for a Sonet or Sdh component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSonetStatsEntry

lpSonetStatsEntry 1.3.6.1.4.1.562.2.4.1.12.14.17.1
An entry in the lpSonetStatsTable.
OBJECT-TYPE    
  LpSonetStatsEntry  

lpSonetRunningTime 1.3.6.1.4.1.562.2.4.1.12.14.17.1.1
This attribute indicates the total number of seconds since the Sonet/ Sdh component has been activated and been in unlocked state. All the other error counts that follow can be updated when this count is active.
OBJECT-TYPE    
  Counter32  

lpSonetErrorFreeSec 1.3.6.1.4.1.562.2.4.1.12.14.17.1.2
This attribute indicates the number of seconds that the Sonet/Sdh component has been in an near-end error free state.
OBJECT-TYPE    
  Counter32  

lpSonetSectCodeViolations 1.3.6.1.4.1.562.2.4.1.12.14.17.1.3
This attribute indicates the total number of Section Code Violations (SCVs) detected. A SCV corresponds to section BIP-8 error. SCV counting is inhibited for second intervals where a Section Severely Errored Second (SSES) is counted. The count wraps at its maximum value.
OBJECT-TYPE    
  Counter32  

lpSonetSectErroredSec 1.3.6.1.4.1.562.2.4.1.12.14.17.1.4
This attribute indicates the total number of Section Errored Seconds (SESs) that have been counted. A SES is declared for second intervals containing one or more SCVs or one or more Loss Of Signal (LOS) or Severely Errored Frame (SEF) defects. A SEF defect is the occurrence of 4 contiguous errored STS or STM frame alignment words.
OBJECT-TYPE    
  Counter32  

lpSonetSectSevErroredSec 1.3.6.1.4.1.562.2.4.1.12.14.17.1.5
This attribute indicates the total number of Section Severely Errored Seconds (SSESs) that have been counted. A SSES is declared for second intervals containing more than x SCVs or one or more LOS or SEF defects. The value of x is 155 for a 155 Mbits/sec interface.
OBJECT-TYPE    
  Counter32  

lpSonetSectLosSec 1.3.6.1.4.1.562.2.4.1.12.14.17.1.6
This attribute indicates the total number of Section LOS Seconds (SLOSSs) that have been counted. A SLOSS is declared for second intervals containing one or more LOS defects.
OBJECT-TYPE    
  Counter32  

lpSonetSectSevErroredFrmSec 1.3.6.1.4.1.562.2.4.1.12.14.17.1.7
This attribute indicates the total number of Section Severely Errored Frame Seconds (SSEFSs) that have been counted. A SSEFS is declared for second intervals containing one or more SEF defects.
OBJECT-TYPE    
  Counter32  

lpSonetSectFailures 1.3.6.1.4.1.562.2.4.1.12.14.17.1.8
This attribute indicates the total number of times that a section failure (LOS or LOF failure) has been declared.
OBJECT-TYPE    
  Counter32  

lpSonetLineCodeViolations 1.3.6.1.4.1.562.2.4.1.12.14.17.1.9
This attribute indicates the total number of Line Code Violations (LCVs) detected. A LCV corresponds to a line BIP-24 errors. LCV counting is inhibited for second intervals where a Line Severely Errored Second (LSES) is counted. Counting of LCVs is also inhibited over second intervals where a Line Unavailable Second (LUAS) is counted. The count wraps at its maximum value.
OBJECT-TYPE    
  Counter32  

lpSonetLineErroredSec 1.3.6.1.4.1.562.2.4.1.12.14.17.1.10
This attribute indicates the total number of Line Errored Seconds (LESs) that have been counted. A LES is declared for second intervals containing one or more LCVs or one or more line AIS defects. Counting of LES is inhibited over second intervals where a LUAS is counted.
OBJECT-TYPE    
  Counter32  

lpSonetLineSevErroredSec 1.3.6.1.4.1.562.2.4.1.12.14.17.1.11
This attribute indicates the total number of Line Severely Errored Seconds (LSESs) that have been counted. A LSES is declared for second intervals containing more than x LCVs or one or more L- AIS defects. The value of x is 154 for a 155 Mbits/sec interface. Counting of LSES is inhibited over second intervals where a LUAS is counted.
OBJECT-TYPE    
  Counter32  

lpSonetLineAisSec 1.3.6.1.4.1.562.2.4.1.12.14.17.1.12
This attribute indicates the total number of Line AIS Seconds (LAISSs) that have been counted. A LAISS is declared for second intervals containing one or more L-AIS defects. Counting of LAISS is inhibited over second intervals where a LUAS is counted.
OBJECT-TYPE    
  Counter32  

lpSonetLineUnavailSec 1.3.6.1.4.1.562.2.4.1.12.14.17.1.13
This attribute indicates the total number of one second intervals for which the STS line is unavailable. The STS line becomes unavailable at the onset of 10 consecutive LSESs. The 10 LSESs are included in the unavailable time. Once unavailable, the STS line becomes available at the onset of 10 contiguous seconds with no LSES. The 10 seconds with no LSES are excluded from the unavailable time. For second intervals where a Line Unavailable Second (LUAS) is counted, counting of LCV, LES, LSES and LAISS is inhibited.
OBJECT-TYPE    
  Counter32  

lpSonetLineFailures 1.3.6.1.4.1.562.2.4.1.12.14.17.1.14
This attribute indicates the total number of times that a line failure (L-AIS failure) has been declared.
OBJECT-TYPE    
  Counter32  

lpSonetFarEndLineErrorFreeSec 1.3.6.1.4.1.562.2.4.1.12.14.17.1.15
This attribute indicates the number of seconds that the Sonet/Sdh component has been in an far-end error free state.
OBJECT-TYPE    
  Counter32  

lpSonetFarEndLineCodeViolations 1.3.6.1.4.1.562.2.4.1.12.14.17.1.16
This attribute indicates the total number of line FEBE detected from the incoming line. The counting of line FEBE is inhibited for second intervals where a Far-End Line Severely Errored Second (FELSES) is counted. Counting of FELCVs is also inhibited over second intervals where a Far-End Line Unavailable Second (FELUAS) is counted. The count wraps at its maximum value.
OBJECT-TYPE    
  Counter32  

lpSonetFarEndLineErroredSec 1.3.6.1.4.1.562.2.4.1.12.14.17.1.17
This attribute indicates the total number of Far-End Line Errored Seconds (FELESs) that have been counted. A FELES is declared for second intervals containing one or more Far-End Line CVs (FELCVs) or one or more L-RDI defects. Counting of FELES is inhibited over second intervals where a FELUAS is counted.
OBJECT-TYPE    
  Counter32  

lpSonetFarEndLineSevErroredSec 1.3.6.1.4.1.562.2.4.1.12.14.17.1.18
This attribute indicates the total number of Far-End Line Severely Errored Seconds (FELSESs) that have been counted. A FELSES is declared for second intervals containing more than x FELCVs or one or more L-RDI defects. The value of x is 154 for a 155 Mbits/ sec interface. Counting of FELSES is inhibited over second intervals where a FELUAS is counted.
OBJECT-TYPE    
  Counter32  

lpSonetFarEndLineAisSec 1.3.6.1.4.1.562.2.4.1.12.14.17.1.19
This attribute indicates the total number of Far-End Line AIS Seconds (FELAISSs) that have been counted. A FELAISS is declared for second intervals one or more L-RDI defects. Counting of FELAISS is inhibited over second intervals where a FELUAS is counted.
OBJECT-TYPE    
  Counter32  

lpSonetFarEndLineUnavailSec 1.3.6.1.4.1.562.2.4.1.12.14.17.1.20
This attribute indicates the total number of one second intervals for which the STS far-end line is unavailable. The STS far-end line becomes unavailable at the onset of 10 consecutive FELSESs. The 10 FELSESs are included in the unavailable time. Once unavailable, the STS far-end line becomes available at the onset of 10 contiguous seconds with no FELSES. The 10 seconds with no FELSES are excluded from the unavailable time. For second intervals where a Far-End Line Unavailable Second (FELUAS) is counted, counting of FELCV, FELES, FELSES and FELAISS is inhibited.
OBJECT-TYPE    
  Counter32  

lpSonetFarEndLineFailures 1.3.6.1.4.1.562.2.4.1.12.14.17.1.21
This attribute indicates the total number of times that a far-end line failure (L-RFI failure) has been declared.
OBJECT-TYPE    
  Counter32  

lpSdh 1.3.6.1.4.1.562.2.4.1.12.15
OBJECT IDENTIFIER    

lpSdhRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.15.1
This entry controls the addition and deletion of lpSdh components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSdhRowStatusEntry

lpSdhRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.15.1.1
A single entry in the table represents a single lpSdh component.
OBJECT-TYPE    
  LpSdhRowStatusEntry  

lpSdhRowStatus 1.3.6.1.4.1.562.2.4.1.12.15.1.1.1
This variable is used as the basis for SNMP naming of lpSdh components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

lpSdhComponentName 1.3.6.1.4.1.562.2.4.1.12.15.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpSdhStorageType 1.3.6.1.4.1.562.2.4.1.12.15.1.1.4
This variable represents the storage type value for the lpSdh tables.
OBJECT-TYPE    
  StorageType  

lpSdhIndex 1.3.6.1.4.1.562.2.4.1.12.15.1.1.10
This variable represents the index for the lpSdh tables.
OBJECT-TYPE    
  Integer32 0..2  

lpSdhPath 1.3.6.1.4.1.562.2.4.1.12.15.2
OBJECT IDENTIFIER    

lpSdhPathRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.15.2.1
This entry controls the addition and deletion of lpSdhPath components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSdhPathRowStatusEntry

lpSdhPathRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.15.2.1.1
A single entry in the table represents a single lpSdhPath component.
OBJECT-TYPE    
  LpSdhPathRowStatusEntry  

lpSdhPathRowStatus 1.3.6.1.4.1.562.2.4.1.12.15.2.1.1.1
This variable is used as the basis for SNMP naming of lpSdhPath components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

lpSdhPathComponentName 1.3.6.1.4.1.562.2.4.1.12.15.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpSdhPathStorageType 1.3.6.1.4.1.562.2.4.1.12.15.2.1.1.4
This variable represents the storage type value for the lpSdhPath tables.
OBJECT-TYPE    
  StorageType  

lpSdhPathIndex 1.3.6.1.4.1.562.2.4.1.12.15.2.1.1.10
This variable represents the index for the lpSdhPath tables.
OBJECT-TYPE    
  Integer32 0..0  

lpSdhPathCell 1.3.6.1.4.1.562.2.4.1.12.15.2.2
OBJECT IDENTIFIER    

lpSdhPathCellRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.15.2.2.1
This entry controls the addition and deletion of lpSdhPathCell components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSdhPathCellRowStatusEntry

lpSdhPathCellRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.15.2.2.1.1
A single entry in the table represents a single lpSdhPathCell component.
OBJECT-TYPE    
  LpSdhPathCellRowStatusEntry  

lpSdhPathCellRowStatus 1.3.6.1.4.1.562.2.4.1.12.15.2.2.1.1.1
This variable is used as the basis for SNMP naming of lpSdhPathCell components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpSdhPathCellComponentName 1.3.6.1.4.1.562.2.4.1.12.15.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpSdhPathCellStorageType 1.3.6.1.4.1.562.2.4.1.12.15.2.2.1.1.4
This variable represents the storage type value for the lpSdhPathCell tables.
OBJECT-TYPE    
  StorageType  

lpSdhPathCellIndex 1.3.6.1.4.1.562.2.4.1.12.15.2.2.1.1.10
This variable represents the index for the lpSdhPathCell tables.
OBJECT-TYPE    
  NonReplicated  

lpSdhPathCellProvTable 1.3.6.1.4.1.562.2.4.1.12.15.2.2.10
This group contains the provisioning attributes for the AtmCell component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSdhPathCellProvEntry

lpSdhPathCellProvEntry 1.3.6.1.4.1.562.2.4.1.12.15.2.2.10.1
An entry in the lpSdhPathCellProvTable.
OBJECT-TYPE    
  LpSdhPathCellProvEntry  

lpSdhPathCellAlarmActDelay 1.3.6.1.4.1.562.2.4.1.12.15.2.2.10.1.1
This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
OBJECT-TYPE    
  Unsigned32 0..2000  

lpSdhPathCellScrambleCellPayload 1.3.6.1.4.1.562.2.4.1.12.15.2.2.10.1.2
Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

lpSdhPathCellCorrectSingleBitHeaderErrors 1.3.6.1.4.1.562.2.4.1.12.15.2.2.10.1.3
This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

lpSdhPathCellOperTable 1.3.6.1.4.1.562.2.4.1.12.15.2.2.11
This group contains the common operational attributes for the AtmCell component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSdhPathCellOperEntry

lpSdhPathCellOperEntry 1.3.6.1.4.1.562.2.4.1.12.15.2.2.11.1
An entry in the lpSdhPathCellOperTable.
OBJECT-TYPE    
  LpSdhPathCellOperEntry  

lpSdhPathCellLcdAlarm 1.3.6.1.4.1.562.2.4.1.12.15.2.2.11.1.1
This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpSdhPathCellStatsTable 1.3.6.1.4.1.562.2.4.1.12.15.2.2.12
This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSdhPathCellStatsEntry

lpSdhPathCellStatsEntry 1.3.6.1.4.1.562.2.4.1.12.15.2.2.12.1
An entry in the lpSdhPathCellStatsTable.
OBJECT-TYPE    
  LpSdhPathCellStatsEntry  

lpSdhPathCellUncorrectableHecErrors 1.3.6.1.4.1.562.2.4.1.12.15.2.2.12.1.1
This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
OBJECT-TYPE    
  Counter32  

lpSdhPathCellSevErroredSec 1.3.6.1.4.1.562.2.4.1.12.15.2.2.12.1.2
This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
OBJECT-TYPE    
  Counter32  

lpSdhPathCellReceiveCellUtilization 1.3.6.1.4.1.562.2.4.1.12.15.2.2.12.1.3
This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  Gauge32 0..100  

lpSdhPathCellTransmitCellUtilization 1.3.6.1.4.1.562.2.4.1.12.15.2.2.12.1.4
This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  Gauge32 0..100  

lpSdhPathCellCorrectableHeaderErrors 1.3.6.1.4.1.562.2.4.1.12.15.2.2.12.1.5
This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
OBJECT-TYPE    
  Counter32  

lpSdhPathProvTable 1.3.6.1.4.1.562.2.4.1.12.15.2.10
This group contains all of the provisioning data for a Sonet/Sdh Path component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSdhPathProvEntry

lpSdhPathProvEntry 1.3.6.1.4.1.562.2.4.1.12.15.2.10.1
An entry in the lpSdhPathProvTable.
OBJECT-TYPE    
  LpSdhPathProvEntry  

lpSdhPathApplicationFramerName 1.3.6.1.4.1.562.2.4.1.12.15.2.10.1.1
This attribute defines the link to the software stack. It defines which application is running on top of the Path component.
OBJECT-TYPE    
  Link  

lpSdhPathCidDataTable 1.3.6.1.4.1.562.2.4.1.12.15.2.11
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSdhPathCidDataEntry

lpSdhPathCidDataEntry 1.3.6.1.4.1.562.2.4.1.12.15.2.11.1
An entry in the lpSdhPathCidDataTable.
OBJECT-TYPE    
  LpSdhPathCidDataEntry  

lpSdhPathCustomerIdentifier 1.3.6.1.4.1.562.2.4.1.12.15.2.11.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

lpSdhPathStateTable 1.3.6.1.4.1.562.2.4.1.12.15.2.12
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSdhPathStateEntry

lpSdhPathStateEntry 1.3.6.1.4.1.562.2.4.1.12.15.2.12.1
An entry in the lpSdhPathStateTable.
OBJECT-TYPE    
  LpSdhPathStateEntry  

lpSdhPathAdminState 1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpSdhPathOperationalState 1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpSdhPathUsageState 1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpSdhPathAvailabilityStatus 1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

lpSdhPathProceduralStatus 1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpSdhPathControlStatus 1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpSdhPathAlarmStatus 1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpSdhPathStandbyStatus 1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

lpSdhPathUnknownStatus 1.3.6.1.4.1.562.2.4.1.12.15.2.12.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

lpSdhPathIfEntryTable 1.3.6.1.4.1.562.2.4.1.12.15.2.13
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSdhPathIfEntryEntry

lpSdhPathIfEntryEntry 1.3.6.1.4.1.562.2.4.1.12.15.2.13.1
An entry in the lpSdhPathIfEntryTable.
OBJECT-TYPE    
  LpSdhPathIfEntryEntry  

lpSdhPathIfAdminStatus 1.3.6.1.4.1.562.2.4.1.12.15.2.13.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpSdhPathIfIndex 1.3.6.1.4.1.562.2.4.1.12.15.2.13.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

lpSdhPathOperStatusTable 1.3.6.1.4.1.562.2.4.1.12.15.2.14
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSdhPathOperStatusEntry

lpSdhPathOperStatusEntry 1.3.6.1.4.1.562.2.4.1.12.15.2.14.1
An entry in the lpSdhPathOperStatusTable.
OBJECT-TYPE    
  LpSdhPathOperStatusEntry  

lpSdhPathSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.12.15.2.14.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpSdhPathOperTable 1.3.6.1.4.1.562.2.4.1.12.15.2.15
This group contains the common operational data for Path component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSdhPathOperEntry

lpSdhPathOperEntry 1.3.6.1.4.1.562.2.4.1.12.15.2.15.1
An entry in the lpSdhPathOperTable.
OBJECT-TYPE    
  LpSdhPathOperEntry  

lpSdhPathLopAlarm 1.3.6.1.4.1.562.2.4.1.12.15.2.15.1.1
This attribute displays whether a Loss Of Pointer (LOP) alarm state has been entered. An LOP alarm state is entered when LOP defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOP defect occurs when no valid SPE or VC pointer was received in 8 contiguous frames. If the LOP defects are intermittently occurring, the LOP defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the LOP alarm condition is cleared. The condition is cleared when no more invalid pointer has been reported for 10 seconds +/- 0.5 seconds. The lopAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpSdhPathRxAisAlarm 1.3.6.1.4.1.562.2.4.1.12.15.2.15.1.2
This attribute displays whether an Path Alarm Indication Signal (P- AIS) alarm state has been entered. An P-AIS alarm state is entered when P-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-AIS defect is the occurrence of the P-AIS signal in three contiguous valid STS or STM frames (all one's in bytes H1 and H2). If the P-AIS defects are intermittently occurring, the P-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-AIS alarm condition is cleared. The condition is cleared after no P-AIS defect has been detected for 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpSdhPathRxRfiAlarm 1.3.6.1.4.1.562.2.4.1.12.15.2.15.1.3
This attribute displays whether the Path Remote Failure Indication (P-RFI) alarm state has been entered. An P-RFI alarm state is entered when Path Remote Defect Indicator (P-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-RDI defect is the occurrence of the P-RDI signal in five contiguous valid STS or STM frames (bit 5 of the G1 byte set to 1). If the P-RDI defects are intermittently occurring, the P-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10)with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-RFI alarm condition is cleared. The condition is cleared after no P-RDI defect has been detected for 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpSdhPathSignalLabelMismatch 1.3.6.1.4.1.562.2.4.1.12.15.2.15.1.4
This attribute displays whether the Path Signal Label Mismatch (P- SLM) failure condition has been entered. An P-SLM failure condition is entered when P-SLM defects have been observed and accumulated for period of 2.5 seconds +/- 0.5 seconds. An P-SLM defect occurs when detecting an unexpected path signal label. The expected Path signal labels are 'Mapping for ATM' or 'Equipped - Non Specific Payload'. If the P-SLM defects are intermittently occurring, the P-SLM defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the Path Signal Label Mismatch failure condition is cleared. The condition is cleared when an expected path signal label is received for 10 seconds +/- 0.5 seconds. The signalLabelMismatch attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpSdhPathTxAis 1.3.6.1.4.1.562.2.4.1.12.15.2.15.1.5
This attribute displays whether the Path Alarm Indication Signal (P- AIS) signal is being transmitted on the path. The P-AIS signal is transmitted when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpSdhPathTxRdi 1.3.6.1.4.1.562.2.4.1.12.15.2.15.1.6
This attribute displays whether the Path Remote Defect Indicator (P-RDI) signal is being transmitted over the path signal. The P-RDI signal is transmitted over the outgoing line upon detection of LOP, P-AIS or the occurrence of the LCD state. This attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpSdhPathStatsTable 1.3.6.1.4.1.562.2.4.1.12.15.2.16
This group contains the statistics data for a Sonet/Sdh Path component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSdhPathStatsEntry

lpSdhPathStatsEntry 1.3.6.1.4.1.562.2.4.1.12.15.2.16.1
An entry in the lpSdhPathStatsTable.
OBJECT-TYPE    
  LpSdhPathStatsEntry  

lpSdhPathPathErrorFreeSec 1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.1
This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an near-end error free state.
OBJECT-TYPE    
  Counter32  

lpSdhPathPathCodeViolations 1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.2
This attribute indicates the total number of Path Code Violations (PCVs) detected. Each PCV corresponds to a path BIP-8 error. PCV counting is inhibited over second intervals where a Path Severely Errored Second (PSES) is counted. Counting of PCVs is also inhibited over second intervals where a Path Unavailable Second (PUAS) is counted. The count wraps at its maximum value.
OBJECT-TYPE    
  Counter32  

lpSdhPathPathErroredSec 1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.3
This attribute indicates the total number of Path Errored Seconds (PESs) that have been counted. A PES is declared for second intervals containing one or more PCVs or one or more LOP or path AIS defects. Counting of PES is inhibited when PUAS is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

lpSdhPathPathSevErroredSec 1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.4
This attribute indicates the total number of Path Severely Errored Seconds (PSESs) that have been counted. A PSES is declared for second intervals containing more than x PCVs or one or more LOP or path AIS defects. The value of x is 2400 for a 155 Mbits/sec interface. Counting of PSES is inhibited when PUAS is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

lpSdhPathPathAisLopSec 1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.5
This attribute indicates the total number of path AIS and LOP Seconds (PALSs). A PALS is declared for second intervals containing one or more path AIS or LOP defects. Counting of PALS is inhibited when PUAS is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

lpSdhPathPathUnavailSec 1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.6
This attribute indicates the total number of one second intervals for which the STS/STM path is unavailable. The path becomes unavailable at the onset of 10 consecutive PSESs. The 10 PSESs are included in the unavailable time. Once unavailable, the path becomes available at the onset of 10 contiguous seconds with no PSES. The 10 seconds with no PSES are excluded from the unavailable time. For second intervals where a Path Unavailable Second (PUAS) is counted, counting of PCV, PES, PSES and PALS is inhibited.
OBJECT-TYPE    
  Counter32  

lpSdhPathPathFailures 1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.7
This attribute indicates the total number of times that a path failure (LOP, P-AIS or Path Signal Label Mismatch failure) has been declared.
OBJECT-TYPE    
  Counter32  

lpSdhPathFarEndPathErrorFreeSec 1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.8
This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an far-end error free state.
OBJECT-TYPE    
  Counter32  

lpSdhPathFarEndPathCodeViolations 1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.9
This attribute indicates the total number of Far-End Path Code Violations (FEPCVs) detected. Each FEPCV corresponds to a path FEBE. FEPCV counting is inhibited over second intervals where a Far-End Path Severely Errored Second (FEPSES) is counted. Counting of PCVs is also inhibited over second intervals where a Far-End Path Unavailable Second (FEPUAS) is counted. The count wraps at its maximum value.
OBJECT-TYPE    
  Counter32  

lpSdhPathFarEndPathErroredSec 1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.10
This attribute indicates the total number of Far-End Path Errored Seconds (FEPESs) that have been counted. A FEPES is declared for second intervals containing one or more FEPCVs or one or more path RDI (P-RDI) defects. Counting of FEPES is inhibited when FEPUAS is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

lpSdhPathFarEndPathSevErroredSec 1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.11
This attribute indicates the total number of Far-End Path Severely Errored Seconds (FEPSESs) that have been counted. A FEPSES is declared for second intervals containing more than x FEPCVs or one or more P-RDI defects. The value of x is 2400 for a 155 Mbits/ sec interface. Counting of FEPSESs is inhibited when FEPUAS is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

lpSdhPathFarEndPathAisLopSec 1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.12
This attribute indicates the total number of Far-End Path AIS and LOP Seconds (FEPALSs). A FEPALS is declared for second intervals containing one or more P-RDI defects. Counting of FEPALS is inhibited when FEPUAS is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

lpSdhPathFarEndPathUnavailSec 1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.13
This attribute indicates the total number of one second intervals for which the STS/STM far-end path is unavailable. The far-end path becomes unavailable at the onset of 10 consecutive FEPSESs. The 10 FEPSESs are included in the unavailable time. Once unavailable, the far-end path becomes available at the onset of 10 contiguous seconds with no FEPSES. The 10 seconds with no FEPSES are excluded from the unavailable time. For second intervals where a Far-End Path Unavailable Second (FEPUAS) is counted, counting of FEPCV, FEPES, FEPSES and FEPALS is inhibited.
OBJECT-TYPE    
  Counter32  

lpSdhPathFarEndPathFailures 1.3.6.1.4.1.562.2.4.1.12.15.2.16.1.14
This attribute indicates the total number of times that a STS/STM far-end path failure (P-RFI failure) has been declared.
OBJECT-TYPE    
  Counter32  

lpSdhTest 1.3.6.1.4.1.562.2.4.1.12.15.3
OBJECT IDENTIFIER    

lpSdhTestRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.15.3.1
This entry controls the addition and deletion of lpSdhTest components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSdhTestRowStatusEntry

lpSdhTestRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.15.3.1.1
A single entry in the table represents a single lpSdhTest component.
OBJECT-TYPE    
  LpSdhTestRowStatusEntry  

lpSdhTestRowStatus 1.3.6.1.4.1.562.2.4.1.12.15.3.1.1.1
This variable is used as the basis for SNMP naming of lpSdhTest components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpSdhTestComponentName 1.3.6.1.4.1.562.2.4.1.12.15.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpSdhTestStorageType 1.3.6.1.4.1.562.2.4.1.12.15.3.1.1.4
This variable represents the storage type value for the lpSdhTest tables.
OBJECT-TYPE    
  StorageType  

lpSdhTestIndex 1.3.6.1.4.1.562.2.4.1.12.15.3.1.1.10
This variable represents the index for the lpSdhTest tables.
OBJECT-TYPE    
  NonReplicated  

lpSdhTestStateTable 1.3.6.1.4.1.562.2.4.1.12.15.3.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSdhTestStateEntry

lpSdhTestStateEntry 1.3.6.1.4.1.562.2.4.1.12.15.3.10.1
An entry in the lpSdhTestStateTable.
OBJECT-TYPE    
  LpSdhTestStateEntry  

lpSdhTestAdminState 1.3.6.1.4.1.562.2.4.1.12.15.3.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpSdhTestOperationalState 1.3.6.1.4.1.562.2.4.1.12.15.3.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpSdhTestUsageState 1.3.6.1.4.1.562.2.4.1.12.15.3.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpSdhTestSetupTable 1.3.6.1.4.1.562.2.4.1.12.15.3.11
This group contains all of the operational data for a Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSdhTestSetupEntry

lpSdhTestSetupEntry 1.3.6.1.4.1.562.2.4.1.12.15.3.11.1
An entry in the lpSdhTestSetupTable.
OBJECT-TYPE    
  LpSdhTestSetupEntry  

lpSdhTestPurpose 1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.1
This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
OBJECT-TYPE    
  AsciiString SIZE(0..40)  

lpSdhTestType 1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.2
This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
OBJECT-TYPE    
  INTEGER card(0), manual(1), localLoop(2), remoteLoop(3), externalLoop(4), payloadLoop(5), remoteLoopThisTrib(6), v54RemoteLoop(7), pn127RemoteLoop(8)  

lpSdhTestFrmSize 1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.3
This attribute defines the size of the test data frames in number of bytes.
OBJECT-TYPE    
  Unsigned32 4..4096  

lpSdhTestFrmPatternType 1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.4
This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
OBJECT-TYPE    
  INTEGER ccitt32kBitPattern(0), ccitt8MBitPattern(1), customizedPattern(2)  

lpSdhTestCustomizedPattern 1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.5
This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
OBJECT-TYPE    
  Hex 0..4294967295  

lpSdhTestDataStartDelay 1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.6
This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
OBJECT-TYPE    
  Unsigned32 0..1814400  

lpSdhTestDisplayInterval 1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.7
This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
OBJECT-TYPE    
  Unsigned32 0..30240  

lpSdhTestDuration 1.3.6.1.4.1.562.2.4.1.12.15.3.11.1.8
This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
OBJECT-TYPE    
  Unsigned32 1..30240  

lpSdhTestResultsTable 1.3.6.1.4.1.562.2.4.1.12.15.3.12
This group contains all the statistics related attributes of the Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSdhTestResultsEntry

lpSdhTestResultsEntry 1.3.6.1.4.1.562.2.4.1.12.15.3.12.1
An entry in the lpSdhTestResultsTable.
OBJECT-TYPE    
  LpSdhTestResultsEntry  

lpSdhTestElapsedTime 1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.1
This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
OBJECT-TYPE    
  Counter32  

lpSdhTestTimeRemaining 1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.2
This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

lpSdhTestCauseOfTermination 1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.3
This attribute records the reason the test is terminated.
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4), hardwareReconfigured(5)  

lpSdhTestBitsTx 1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.4
This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpSdhTestBytesTx 1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.5
This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpSdhTestFrmTx 1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.6
This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpSdhTestBitsRx 1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.7
This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpSdhTestBytesRx 1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.8
This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpSdhTestFrmRx 1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.9
This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpSdhTestErroredFrmRx 1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.10
This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
OBJECT-TYPE    
  PassportCounter64  

lpSdhTestBitErrorRate 1.3.6.1.4.1.562.2.4.1.12.15.3.12.1.11
This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
OBJECT-TYPE    
  AsciiString SIZE(5)  

lpSdhProvTable 1.3.6.1.4.1.562.2.4.1.12.15.10
This group contains all of the provisioning data for a Sonet or Sdh component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSdhProvEntry

lpSdhProvEntry 1.3.6.1.4.1.562.2.4.1.12.15.10.1
An entry in the lpSdhProvTable.
OBJECT-TYPE    
  LpSdhProvEntry  

lpSdhClockingSource 1.3.6.1.4.1.562.2.4.1.12.15.10.1.1
This attribute defines the type of clocking source used for synchronizing the OC-3 transmit clock: local means direct use of the local clock oscillator at its centre frequency; line means the use of a signal phase-locked to the incoming OC-3 line rate; module means the use of a signal phase-locked to the CP reference clock. When adding a Sonet/Sdh component, the clockingSource attribute is set to module if the NetworkSynchronization component has been added and is set to local otherwise. Note that the multiport OC-3 cell-based cards has one common clock source for each of the three ports when either the clocking source local or module is selected. For this reason, it is not allowed to have at the same time the clockingSource attribute set to local on one port and module on another port. Furthermore, the clockingSource attribute cannot be set to module if the NetworkSynchronization component has not been added.
OBJECT-TYPE    
  INTEGER local(0), line(1), module(2)  

lpSdhCidDataTable 1.3.6.1.4.1.562.2.4.1.12.15.11
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSdhCidDataEntry

lpSdhCidDataEntry 1.3.6.1.4.1.562.2.4.1.12.15.11.1
An entry in the lpSdhCidDataTable.
OBJECT-TYPE    
  LpSdhCidDataEntry  

lpSdhCustomerIdentifier 1.3.6.1.4.1.562.2.4.1.12.15.11.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

lpSdhAdminInfoTable 1.3.6.1.4.1.562.2.4.1.12.15.12
This group contains the attributes pertaining to the vendor of the equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSdhAdminInfoEntry

lpSdhAdminInfoEntry 1.3.6.1.4.1.562.2.4.1.12.15.12.1
An entry in the lpSdhAdminInfoTable.
OBJECT-TYPE    
  LpSdhAdminInfoEntry  

lpSdhVendor 1.3.6.1.4.1.562.2.4.1.12.15.12.1.1
This is the name of the vendor supplying the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..20)  

lpSdhCommentText 1.3.6.1.4.1.562.2.4.1.12.15.12.1.2
Any miscellaneous text about the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..60)  

lpSdhIfEntryTable 1.3.6.1.4.1.562.2.4.1.12.15.13
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSdhIfEntryEntry

lpSdhIfEntryEntry 1.3.6.1.4.1.562.2.4.1.12.15.13.1
An entry in the lpSdhIfEntryTable.
OBJECT-TYPE    
  LpSdhIfEntryEntry  

lpSdhIfAdminStatus 1.3.6.1.4.1.562.2.4.1.12.15.13.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpSdhIfIndex 1.3.6.1.4.1.562.2.4.1.12.15.13.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

lpSdhOperStatusTable 1.3.6.1.4.1.562.2.4.1.12.15.14
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSdhOperStatusEntry

lpSdhOperStatusEntry 1.3.6.1.4.1.562.2.4.1.12.15.14.1
An entry in the lpSdhOperStatusTable.
OBJECT-TYPE    
  LpSdhOperStatusEntry  

lpSdhSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.12.15.14.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpSdhStateTable 1.3.6.1.4.1.562.2.4.1.12.15.15
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSdhStateEntry

lpSdhStateEntry 1.3.6.1.4.1.562.2.4.1.12.15.15.1
An entry in the lpSdhStateTable.
OBJECT-TYPE    
  LpSdhStateEntry  

lpSdhAdminState 1.3.6.1.4.1.562.2.4.1.12.15.15.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpSdhOperationalState 1.3.6.1.4.1.562.2.4.1.12.15.15.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpSdhUsageState 1.3.6.1.4.1.562.2.4.1.12.15.15.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpSdhAvailabilityStatus 1.3.6.1.4.1.562.2.4.1.12.15.15.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

lpSdhProceduralStatus 1.3.6.1.4.1.562.2.4.1.12.15.15.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpSdhControlStatus 1.3.6.1.4.1.562.2.4.1.12.15.15.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpSdhAlarmStatus 1.3.6.1.4.1.562.2.4.1.12.15.15.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpSdhStandbyStatus 1.3.6.1.4.1.562.2.4.1.12.15.15.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

lpSdhUnknownStatus 1.3.6.1.4.1.562.2.4.1.12.15.15.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

lpSdhOperTable 1.3.6.1.4.1.562.2.4.1.12.15.16
This group contains the common operational data for Sonet or Sdh component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSdhOperEntry

lpSdhOperEntry 1.3.6.1.4.1.562.2.4.1.12.15.16.1
An entry in the lpSdhOperTable.
OBJECT-TYPE    
  LpSdhOperEntry  

lpSdhLosAlarm 1.3.6.1.4.1.562.2.4.1.12.15.16.1.1
This attribute indicates whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds, or if an LOS defect is present when the criteria for LOF failure declaration have been met. A LOS defect is declared when 20+/-3 us of all-zeros pattern is detected. The LOS defect is cleared when two valid framing words are detected and no Loss Of Signal condition is detected during an interval of 20+/-3 us. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the LOS alarm condition is cleared. The LOS alarm state is cleared after LOS defects have been absent for a period of 10 seconds +/- 0.5 seconds. The losAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpSdhLofAlarm 1.3.6.1.4.1.562.2.4.1.12.15.16.1.2
This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when LOF defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds, except when an LOS defect or failure is present. An LOF defect is detected when getting contiguous errored frame alignment for at least 3 msec. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the LOF alarm condition is cleared. The condition is cleared when framing has been achieved for a period of 10 seconds +/- 0.5 seconds. The lofAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpSdhRxAisAlarm 1.3.6.1.4.1.562.2.4.1.12.15.16.1.3
This attribute displays whether a Line Alarm Indication Signal (L- AIS) alarm state has been entered. An L-AIS alarm state is entered when L-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-AIS defect is the occurrence of the L-AIS signal in five contiguous STS (STM) frames (111 pattern in bits 6,7, and 8 of the K2 bytes). If the L-AIS defects are intermittently occurring, the L-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-AIS alarm condition is cleared. The condition is cleared after not detecting the L-AIS signal for a period of 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpSdhRxRfiAlarm 1.3.6.1.4.1.562.2.4.1.12.15.16.1.4
This attribute displays whether a Line Remote Failure Indication (LRFI) alarm state has been entered. An L-RFI alarm state is entered when Line Remote Failure Indication (L-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-RDI defect is the occurrence of the L-RDI signal in five contiguous valid STS (STM) frame (110 pattern in bits 6,7, and 8 of the K2 bytes). If the L-RDI defects are intermittently occurring, the L-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-RFI alarm condition is cleared. The condition is cleared after not detecting the L-RDI signal for a period of 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpSdhTxAis 1.3.6.1.4.1.562.2.4.1.12.15.16.1.5
This attribute displays whether the Line Alarm Indication Signal (L- AIS) signal is being transmitted on the outgoing line. This signal is transmitted when the Sonet/Sdh is locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpSdhTxRdi 1.3.6.1.4.1.562.2.4.1.12.15.16.1.6
This attribute displays whether the Line Remote Defect Indicator (L-RDI) signal is being transmitted over the OC-3 line. The L-RDI signal is transmitted upon the detection of the LOS, LOF or L-AIS defect. This attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpSdhUnusableTxClockRefAlarm 1.3.6.1.4.1.562.2.4.1.12.15.16.1.7
This attribute displays whether an Unusable Transmit Clock Reference (UTCR) alarm state has been entered. A UTCR alarm state is entered when a Sonet/Sdh port provisioned to act as a transmit clock reference has received the code 'do not use for synchronization' in the S1 byte (in the SONET/ SDH line overhead) for 2.5 +/- 0.5 seconds. The condition is cleared after not detecting the 'do not use for synchronization' code for a period of 10 +/- 0.5 seconds or when the port is no longer provisioned to act as a transmit clock reference. A port is acting as a transmit clock reference if it is provisioned with a) a clockingSource of line, or b) it has been provisioned as a primaryReference, secondaryReference or tertiaryReference in the NetworkSynchronization component. The unusableTxClockRefAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpSdhStatsTable 1.3.6.1.4.1.562.2.4.1.12.15.17
This group contains the statistics data for a Sonet or Sdh component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSdhStatsEntry

lpSdhStatsEntry 1.3.6.1.4.1.562.2.4.1.12.15.17.1
An entry in the lpSdhStatsTable.
OBJECT-TYPE    
  LpSdhStatsEntry  

lpSdhRunningTime 1.3.6.1.4.1.562.2.4.1.12.15.17.1.1
This attribute indicates the total number of seconds since the Sonet/ Sdh component has been activated and been in unlocked state. All the other error counts that follow can be updated when this count is active.
OBJECT-TYPE    
  Counter32  

lpSdhErrorFreeSec 1.3.6.1.4.1.562.2.4.1.12.15.17.1.2
This attribute indicates the number of seconds that the Sonet/Sdh component has been in an near-end error free state.
OBJECT-TYPE    
  Counter32  

lpSdhSectCodeViolations 1.3.6.1.4.1.562.2.4.1.12.15.17.1.3
This attribute indicates the total number of Section Code Violations (SCVs) detected. A SCV corresponds to section BIP-8 error. SCV counting is inhibited for second intervals where a Section Severely Errored Second (SSES) is counted. The count wraps at its maximum value.
OBJECT-TYPE    
  Counter32  

lpSdhSectErroredSec 1.3.6.1.4.1.562.2.4.1.12.15.17.1.4
This attribute indicates the total number of Section Errored Seconds (SESs) that have been counted. A SES is declared for second intervals containing one or more SCVs or one or more Loss Of Signal (LOS) or Severely Errored Frame (SEF) defects. A SEF defect is the occurrence of 4 contiguous errored STS or STM frame alignment words.
OBJECT-TYPE    
  Counter32  

lpSdhSectSevErroredSec 1.3.6.1.4.1.562.2.4.1.12.15.17.1.5
This attribute indicates the total number of Section Severely Errored Seconds (SSESs) that have been counted. A SSES is declared for second intervals containing more than x SCVs or one or more LOS or SEF defects. The value of x is 155 for a 155 Mbits/sec interface.
OBJECT-TYPE    
  Counter32  

lpSdhSectLosSec 1.3.6.1.4.1.562.2.4.1.12.15.17.1.6
This attribute indicates the total number of Section LOS Seconds (SLOSSs) that have been counted. A SLOSS is declared for second intervals containing one or more LOS defects.
OBJECT-TYPE    
  Counter32  

lpSdhSectSevErroredFrmSec 1.3.6.1.4.1.562.2.4.1.12.15.17.1.7
This attribute indicates the total number of Section Severely Errored Frame Seconds (SSEFSs) that have been counted. A SSEFS is declared for second intervals containing one or more SEF defects.
OBJECT-TYPE    
  Counter32  

lpSdhSectFailures 1.3.6.1.4.1.562.2.4.1.12.15.17.1.8
This attribute indicates the total number of times that a section failure (LOS or LOF failure) has been declared.
OBJECT-TYPE    
  Counter32  

lpSdhLineCodeViolations 1.3.6.1.4.1.562.2.4.1.12.15.17.1.9
This attribute indicates the total number of Line Code Violations (LCVs) detected. A LCV corresponds to a line BIP-24 errors. LCV counting is inhibited for second intervals where a Line Severely Errored Second (LSES) is counted. Counting of LCVs is also inhibited over second intervals where a Line Unavailable Second (LUAS) is counted. The count wraps at its maximum value.
OBJECT-TYPE    
  Counter32  

lpSdhLineErroredSec 1.3.6.1.4.1.562.2.4.1.12.15.17.1.10
This attribute indicates the total number of Line Errored Seconds (LESs) that have been counted. A LES is declared for second intervals containing one or more LCVs or one or more line AIS defects. Counting of LES is inhibited over second intervals where a LUAS is counted.
OBJECT-TYPE    
  Counter32  

lpSdhLineSevErroredSec 1.3.6.1.4.1.562.2.4.1.12.15.17.1.11
This attribute indicates the total number of Line Severely Errored Seconds (LSESs) that have been counted. A LSES is declared for second intervals containing more than x LCVs or one or more L- AIS defects. The value of x is 154 for a 155 Mbits/sec interface. Counting of LSES is inhibited over second intervals where a LUAS is counted.
OBJECT-TYPE    
  Counter32  

lpSdhLineAisSec 1.3.6.1.4.1.562.2.4.1.12.15.17.1.12
This attribute indicates the total number of Line AIS Seconds (LAISSs) that have been counted. A LAISS is declared for second intervals containing one or more L-AIS defects. Counting of LAISS is inhibited over second intervals where a LUAS is counted.
OBJECT-TYPE    
  Counter32  

lpSdhLineUnavailSec 1.3.6.1.4.1.562.2.4.1.12.15.17.1.13
This attribute indicates the total number of one second intervals for which the STS line is unavailable. The STS line becomes unavailable at the onset of 10 consecutive LSESs. The 10 LSESs are included in the unavailable time. Once unavailable, the STS line becomes available at the onset of 10 contiguous seconds with no LSES. The 10 seconds with no LSES are excluded from the unavailable time. For second intervals where a Line Unavailable Second (LUAS) is counted, counting of LCV, LES, LSES and LAISS is inhibited.
OBJECT-TYPE    
  Counter32  

lpSdhLineFailures 1.3.6.1.4.1.562.2.4.1.12.15.17.1.14
This attribute indicates the total number of times that a line failure (L-AIS failure) has been declared.
OBJECT-TYPE    
  Counter32  

lpSdhFarEndLineErrorFreeSec 1.3.6.1.4.1.562.2.4.1.12.15.17.1.15
This attribute indicates the number of seconds that the Sonet/Sdh component has been in an far-end error free state.
OBJECT-TYPE    
  Counter32  

lpSdhFarEndLineCodeViolations 1.3.6.1.4.1.562.2.4.1.12.15.17.1.16
This attribute indicates the total number of line FEBE detected from the incoming line. The counting of line FEBE is inhibited for second intervals where a Far-End Line Severely Errored Second (FELSES) is counted. Counting of FELCVs is also inhibited over second intervals where a Far-End Line Unavailable Second (FELUAS) is counted. The count wraps at its maximum value.
OBJECT-TYPE    
  Counter32  

lpSdhFarEndLineErroredSec 1.3.6.1.4.1.562.2.4.1.12.15.17.1.17
This attribute indicates the total number of Far-End Line Errored Seconds (FELESs) that have been counted. A FELES is declared for second intervals containing one or more Far-End Line CVs (FELCVs) or one or more L-RDI defects. Counting of FELES is inhibited over second intervals where a FELUAS is counted.
OBJECT-TYPE    
  Counter32  

lpSdhFarEndLineSevErroredSec 1.3.6.1.4.1.562.2.4.1.12.15.17.1.18
This attribute indicates the total number of Far-End Line Severely Errored Seconds (FELSESs) that have been counted. A FELSES is declared for second intervals containing more than x FELCVs or one or more L-RDI defects. The value of x is 154 for a 155 Mbits/ sec interface. Counting of FELSES is inhibited over second intervals where a FELUAS is counted.
OBJECT-TYPE    
  Counter32  

lpSdhFarEndLineAisSec 1.3.6.1.4.1.562.2.4.1.12.15.17.1.19
This attribute indicates the total number of Far-End Line AIS Seconds (FELAISSs) that have been counted. A FELAISS is declared for second intervals one or more L-RDI defects. Counting of FELAISS is inhibited over second intervals where a FELUAS is counted.
OBJECT-TYPE    
  Counter32  

lpSdhFarEndLineUnavailSec 1.3.6.1.4.1.562.2.4.1.12.15.17.1.20
This attribute indicates the total number of one second intervals for which the STS far-end line is unavailable. The STS far-end line becomes unavailable at the onset of 10 consecutive FELSESs. The 10 FELSESs are included in the unavailable time. Once unavailable, the STS far-end line becomes available at the onset of 10 contiguous seconds with no FELSES. The 10 seconds with no FELSES are excluded from the unavailable time. For second intervals where a Far-End Line Unavailable Second (FELUAS) is counted, counting of FELCV, FELES, FELSES and FELAISS is inhibited.
OBJECT-TYPE    
  Counter32  

lpSdhFarEndLineFailures 1.3.6.1.4.1.562.2.4.1.12.15.17.1.21
This attribute indicates the total number of times that a far-end line failure (L-RFI failure) has been declared.
OBJECT-TYPE    
  Counter32  

lpJT2 1.3.6.1.4.1.562.2.4.1.12.16
OBJECT IDENTIFIER    

lpJT2RowStatusTable 1.3.6.1.4.1.562.2.4.1.12.16.1
This entry controls the addition and deletion of lpJT2 components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpJT2RowStatusEntry

lpJT2RowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.16.1.1
A single entry in the table represents a single lpJT2 component.
OBJECT-TYPE    
  LpJT2RowStatusEntry  

lpJT2RowStatus 1.3.6.1.4.1.562.2.4.1.12.16.1.1.1
This variable is used as the basis for SNMP naming of lpJT2 components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

lpJT2ComponentName 1.3.6.1.4.1.562.2.4.1.12.16.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpJT2StorageType 1.3.6.1.4.1.562.2.4.1.12.16.1.1.4
This variable represents the storage type value for the lpJT2 tables.
OBJECT-TYPE    
  StorageType  

lpJT2Index 1.3.6.1.4.1.562.2.4.1.12.16.1.1.10
This variable represents the index for the lpJT2 tables.
OBJECT-TYPE    
  Integer32 0..1  

lpJT2Test 1.3.6.1.4.1.562.2.4.1.12.16.2
OBJECT IDENTIFIER    

lpJT2TestRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.16.2.1
This entry controls the addition and deletion of lpJT2Test components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpJT2TestRowStatusEntry

lpJT2TestRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.16.2.1.1
A single entry in the table represents a single lpJT2Test component.
OBJECT-TYPE    
  LpJT2TestRowStatusEntry  

lpJT2TestRowStatus 1.3.6.1.4.1.562.2.4.1.12.16.2.1.1.1
This variable is used as the basis for SNMP naming of lpJT2Test components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpJT2TestComponentName 1.3.6.1.4.1.562.2.4.1.12.16.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpJT2TestStorageType 1.3.6.1.4.1.562.2.4.1.12.16.2.1.1.4
This variable represents the storage type value for the lpJT2Test tables.
OBJECT-TYPE    
  StorageType  

lpJT2TestIndex 1.3.6.1.4.1.562.2.4.1.12.16.2.1.1.10
This variable represents the index for the lpJT2Test tables.
OBJECT-TYPE    
  NonReplicated  

lpJT2TestStateTable 1.3.6.1.4.1.562.2.4.1.12.16.2.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpJT2TestStateEntry

lpJT2TestStateEntry 1.3.6.1.4.1.562.2.4.1.12.16.2.10.1
An entry in the lpJT2TestStateTable.
OBJECT-TYPE    
  LpJT2TestStateEntry  

lpJT2TestAdminState 1.3.6.1.4.1.562.2.4.1.12.16.2.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpJT2TestOperationalState 1.3.6.1.4.1.562.2.4.1.12.16.2.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpJT2TestUsageState 1.3.6.1.4.1.562.2.4.1.12.16.2.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpJT2TestSetupTable 1.3.6.1.4.1.562.2.4.1.12.16.2.11
This group contains all of the operational data for a Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpJT2TestSetupEntry

lpJT2TestSetupEntry 1.3.6.1.4.1.562.2.4.1.12.16.2.11.1
An entry in the lpJT2TestSetupTable.
OBJECT-TYPE    
  LpJT2TestSetupEntry  

lpJT2TestPurpose 1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.1
This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
OBJECT-TYPE    
  AsciiString SIZE(0..40)  

lpJT2TestType 1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.2
This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
OBJECT-TYPE    
  INTEGER card(0), manual(1), localLoop(2), remoteLoop(3), externalLoop(4), payloadLoop(5), remoteLoopThisTrib(6), v54RemoteLoop(7), pn127RemoteLoop(8)  

lpJT2TestFrmSize 1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.3
This attribute defines the size of the test data frames in number of bytes.
OBJECT-TYPE    
  Unsigned32 4..4096  

lpJT2TestFrmPatternType 1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.4
This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
OBJECT-TYPE    
  INTEGER ccitt32kBitPattern(0), ccitt8MBitPattern(1), customizedPattern(2)  

lpJT2TestCustomizedPattern 1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.5
This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
OBJECT-TYPE    
  Hex 0..4294967295  

lpJT2TestDataStartDelay 1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.6
This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
OBJECT-TYPE    
  Unsigned32 0..1814400  

lpJT2TestDisplayInterval 1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.7
This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
OBJECT-TYPE    
  Unsigned32 0..30240  

lpJT2TestDuration 1.3.6.1.4.1.562.2.4.1.12.16.2.11.1.8
This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
OBJECT-TYPE    
  Unsigned32 1..30240  

lpJT2TestResultsTable 1.3.6.1.4.1.562.2.4.1.12.16.2.12
This group contains all the statistics related attributes of the Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpJT2TestResultsEntry

lpJT2TestResultsEntry 1.3.6.1.4.1.562.2.4.1.12.16.2.12.1
An entry in the lpJT2TestResultsTable.
OBJECT-TYPE    
  LpJT2TestResultsEntry  

lpJT2TestElapsedTime 1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.1
This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
OBJECT-TYPE    
  Counter32  

lpJT2TestTimeRemaining 1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.2
This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

lpJT2TestCauseOfTermination 1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.3
This attribute records the reason the test is terminated.
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4), hardwareReconfigured(5)  

lpJT2TestBitsTx 1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.4
This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpJT2TestBytesTx 1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.5
This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpJT2TestFrmTx 1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.6
This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpJT2TestBitsRx 1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.7
This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpJT2TestBytesRx 1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.8
This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpJT2TestFrmRx 1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.9
This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpJT2TestErroredFrmRx 1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.10
This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
OBJECT-TYPE    
  PassportCounter64  

lpJT2TestBitErrorRate 1.3.6.1.4.1.562.2.4.1.12.16.2.12.1.11
This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
OBJECT-TYPE    
  AsciiString SIZE(5)  

lpJT2Cell 1.3.6.1.4.1.562.2.4.1.12.16.3
OBJECT IDENTIFIER    

lpJT2CellRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.16.3.1
This entry controls the addition and deletion of lpJT2Cell components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpJT2CellRowStatusEntry

lpJT2CellRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.16.3.1.1
A single entry in the table represents a single lpJT2Cell component.
OBJECT-TYPE    
  LpJT2CellRowStatusEntry  

lpJT2CellRowStatus 1.3.6.1.4.1.562.2.4.1.12.16.3.1.1.1
This variable is used as the basis for SNMP naming of lpJT2Cell components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpJT2CellComponentName 1.3.6.1.4.1.562.2.4.1.12.16.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpJT2CellStorageType 1.3.6.1.4.1.562.2.4.1.12.16.3.1.1.4
This variable represents the storage type value for the lpJT2Cell tables.
OBJECT-TYPE    
  StorageType  

lpJT2CellIndex 1.3.6.1.4.1.562.2.4.1.12.16.3.1.1.10
This variable represents the index for the lpJT2Cell tables.
OBJECT-TYPE    
  NonReplicated  

lpJT2CellProvTable 1.3.6.1.4.1.562.2.4.1.12.16.3.10
This group contains the provisioning attributes for the AtmCell component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpJT2CellProvEntry

lpJT2CellProvEntry 1.3.6.1.4.1.562.2.4.1.12.16.3.10.1
An entry in the lpJT2CellProvTable.
OBJECT-TYPE    
  LpJT2CellProvEntry  

lpJT2CellAlarmActDelay 1.3.6.1.4.1.562.2.4.1.12.16.3.10.1.1
This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
OBJECT-TYPE    
  Unsigned32 0..2000  

lpJT2CellScrambleCellPayload 1.3.6.1.4.1.562.2.4.1.12.16.3.10.1.2
Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

lpJT2CellCorrectSingleBitHeaderErrors 1.3.6.1.4.1.562.2.4.1.12.16.3.10.1.3
This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

lpJT2CellOperTable 1.3.6.1.4.1.562.2.4.1.12.16.3.11
This group contains the common operational attributes for the AtmCell component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpJT2CellOperEntry

lpJT2CellOperEntry 1.3.6.1.4.1.562.2.4.1.12.16.3.11.1
An entry in the lpJT2CellOperTable.
OBJECT-TYPE    
  LpJT2CellOperEntry  

lpJT2CellLcdAlarm 1.3.6.1.4.1.562.2.4.1.12.16.3.11.1.1
This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpJT2CellStatsTable 1.3.6.1.4.1.562.2.4.1.12.16.3.12
This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    LpJT2CellStatsEntry

lpJT2CellStatsEntry 1.3.6.1.4.1.562.2.4.1.12.16.3.12.1
An entry in the lpJT2CellStatsTable.
OBJECT-TYPE    
  LpJT2CellStatsEntry  

lpJT2CellUncorrectableHecErrors 1.3.6.1.4.1.562.2.4.1.12.16.3.12.1.1
This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
OBJECT-TYPE    
  Counter32  

lpJT2CellSevErroredSec 1.3.6.1.4.1.562.2.4.1.12.16.3.12.1.2
This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
OBJECT-TYPE    
  Counter32  

lpJT2CellReceiveCellUtilization 1.3.6.1.4.1.562.2.4.1.12.16.3.12.1.3
This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  Gauge32 0..100  

lpJT2CellTransmitCellUtilization 1.3.6.1.4.1.562.2.4.1.12.16.3.12.1.4
This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  Gauge32 0..100  

lpJT2CellCorrectableHeaderErrors 1.3.6.1.4.1.562.2.4.1.12.16.3.12.1.5
This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
OBJECT-TYPE    
  Counter32  

lpJT2CidDataTable 1.3.6.1.4.1.562.2.4.1.12.16.10
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    LpJT2CidDataEntry

lpJT2CidDataEntry 1.3.6.1.4.1.562.2.4.1.12.16.10.1
An entry in the lpJT2CidDataTable.
OBJECT-TYPE    
  LpJT2CidDataEntry  

lpJT2CustomerIdentifier 1.3.6.1.4.1.562.2.4.1.12.16.10.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

lpJT2ProvTable 1.3.6.1.4.1.562.2.4.1.12.16.11
This group contains all of the JT2 specific provisioning data for a JT2 component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpJT2ProvEntry

lpJT2ProvEntry 1.3.6.1.4.1.562.2.4.1.12.16.11.1
An entry in the lpJT2ProvTable.
OBJECT-TYPE    
  LpJT2ProvEntry  

lpJT2ClockingSource 1.3.6.1.4.1.562.2.4.1.12.16.11.1.1
This attribute defines the source of the transmit clock for the JT2 line. When the clocking source is selected from local, the oscillator on the port generates the clocking for the line. When the clocking source is selected from line, the port synchronizes to the clock recovered from the incoming line signal. When the clocking source is selected from module, the port's clock synchronizes to the clock provided by the oscillator on the active CP. Note:- that when one port is set to local, the other port must also be set to local, and when one port is set to module, the other port must also be set to module. If one of the ports is set to line, the other port must be set to otherPort. Also, if a CP reference clock is available when the JT2 component is added, the clocking source defaults to module, whereas if a CP reference clock is not available when the component is added, the clocking source defaults to local.
OBJECT-TYPE    
  INTEGER local(0), line(1), module(2), otherPort(4)  

lpJT2LineLength 1.3.6.1.4.1.562.2.4.1.12.16.11.1.2
This attribute defines the line length for equalization calculations for the JT2 line. The range is between 0 and 480 feet (1 metre = 3.28 feet).
OBJECT-TYPE    
  Unsigned32 0..480  

lpJT2ApplicationFramerName 1.3.6.1.4.1.562.2.4.1.12.16.11.1.3
This attribute defines the link to the software stack. It defines which application is running on top of the JT2 component.
OBJECT-TYPE    
  Link  

lpJT2IfEntryTable 1.3.6.1.4.1.562.2.4.1.12.16.12
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    LpJT2IfEntryEntry

lpJT2IfEntryEntry 1.3.6.1.4.1.562.2.4.1.12.16.12.1
An entry in the lpJT2IfEntryTable.
OBJECT-TYPE    
  LpJT2IfEntryEntry  

lpJT2IfAdminStatus 1.3.6.1.4.1.562.2.4.1.12.16.12.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpJT2IfIndex 1.3.6.1.4.1.562.2.4.1.12.16.12.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

lpJT2OperStatusTable 1.3.6.1.4.1.562.2.4.1.12.16.13
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpJT2OperStatusEntry

lpJT2OperStatusEntry 1.3.6.1.4.1.562.2.4.1.12.16.13.1
An entry in the lpJT2OperStatusTable.
OBJECT-TYPE    
  LpJT2OperStatusEntry  

lpJT2SnmpOperStatus 1.3.6.1.4.1.562.2.4.1.12.16.13.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpJT2StateTable 1.3.6.1.4.1.562.2.4.1.12.16.14
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpJT2StateEntry

lpJT2StateEntry 1.3.6.1.4.1.562.2.4.1.12.16.14.1
An entry in the lpJT2StateTable.
OBJECT-TYPE    
  LpJT2StateEntry  

lpJT2AdminState 1.3.6.1.4.1.562.2.4.1.12.16.14.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpJT2OperationalState 1.3.6.1.4.1.562.2.4.1.12.16.14.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpJT2UsageState 1.3.6.1.4.1.562.2.4.1.12.16.14.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpJT2AvailabilityStatus 1.3.6.1.4.1.562.2.4.1.12.16.14.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

lpJT2ProceduralStatus 1.3.6.1.4.1.562.2.4.1.12.16.14.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpJT2ControlStatus 1.3.6.1.4.1.562.2.4.1.12.16.14.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpJT2AlarmStatus 1.3.6.1.4.1.562.2.4.1.12.16.14.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpJT2StandbyStatus 1.3.6.1.4.1.562.2.4.1.12.16.14.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

lpJT2UnknownStatus 1.3.6.1.4.1.562.2.4.1.12.16.14.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

lpJT2OperTable 1.3.6.1.4.1.562.2.4.1.12.16.15
This group contains the JT2 specific operational data for a JT2 component in a digital hierarchy interface.
OBJECT-TYPE    
  SEQUENCE OF  
    LpJT2OperEntry

lpJT2OperEntry 1.3.6.1.4.1.562.2.4.1.12.16.15.1
An entry in the lpJT2OperTable.
OBJECT-TYPE    
  LpJT2OperEntry  

lpJT2LosAlarm 1.3.6.1.4.1.562.2.4.1.12.16.15.1.1
This attribute displays whether a LOS (Loss of Signal) alarm state is entered. An LOS alarm state is entered when LOS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOS defect is declared at the JT2 line interface when the input data is zero for 20 - 32 clock cycles. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. An LOS failure alarm is cleared when the LOS defect is absent for a period of 10 seconds +/- 0.5 seconds. The JT2 port goes into an operationalState of disabled for the duration of the LOS alarm condition. While the port is in the LOS alarm state, the port also transmits the far-end RAI defect indicator on the out-going JT2 line.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpJT2LofAlarm 1.3.6.1.4.1.562.2.4.1.12.16.15.1.2
This attribute indicates whether a LOF (Loss of Frame) alarm state is entered. A LOF alarm state is entered when LOF defects are observed and accumulated for 2.5 seconds +/- 0.5 seconds or more. A LOF defect occurs when seven or more consecutive incorrect frame alignment patterns (4 multiframes) are received. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The LOF alarm is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds. The port goes into an operationalState of disabled for the duration of the LOF alarm condition. While the port is in the LOF alarm state, the node also transmits the far-end RAI defect indicator on the out-going JT2 line.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpJT2RxAisPhysicalAlarm 1.3.6.1.4.1.562.2.4.1.12.16.15.1.3
This attribute indicates whether a Physical AIS alarm state is entered. A Physical AIS alarm state is entered when a Physical AIS defect is observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. A Physical AIS defect is declared when the incoming signal has two or less zeros in a sequence of 3,156 bits (0.5 ms). If the physical AIS defects are intermittently occurring, the physical AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. A Physical AIS alarm is cleared when the Physical AIS defect is absent for a period of 10 seconds +/- 0.5 seconds. The port goes into an operationalState of disabled until the AIS alarm condition is cleared. While the port is in the Physical AIS alarm state, the node also transmits the far-end RAI defect indicator on the out-going JT2 line.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpJT2RxAisPayloadAlarm 1.3.6.1.4.1.562.2.4.1.12.16.15.1.4
This attribute indicates whether a Payload AIS alarm state is entered. A Payload AIS alarm state is entered when a Payload AIS defect persists for a period of 2.5 seconds +/- 0.5 seconds. A Payload AIS defect is declared when the incoming signal of the 6312 kbit/s frame payload (TS1 - TS96) has two or less zeros in a sequence of 3,072 bits (0.5 ms). If the payload AIS defects are intermittently occurring, the payload AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. A Payload AIS failure alarm is cleared when the Payload AIS defect is absent for a period of 10 seconds +/- 0.5 seconds. The port goes into an operationalState of disabled until the AIS alarm condition is cleared. While the port is in the Payload AIS alarm state, the node also transmits the far-end RAI defect indicator on the out-going JT2 line.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpJT2RxRaiAlarm 1.3.6.1.4.1.562.2.4.1.12.16.15.1.5
This attribute indicates whether a Received RAI alarm state is entered. A received RAI alarm state is entered when the RAI signal is detected on the incoming JT2 Line (when 16 or more consecutive RAI patterns of 1111111100000000 are received on the 4 kbit/s data channel (m-bits) within the framing bits of the JT2 frame). The JT2 port goes into an operationalState of Disabled until the RAI alarm condition is cleared. The RAI alarm is cleared when four or more consecutive non-RAI patterns (anything other than 1111111100000000) are received.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpJT2TxAisPhysicalAlarm 1.3.6.1.4.1.562.2.4.1.12.16.15.1.6
This attribute indicates whether an AIS (Alarm Indication Signal) alarm is being transmitted on the outgoing JT2 line. Currently the JT2 port only transmits a Physical AIS (no Payload AIS) on the outgoing JT2 line. Since there is no Idle signal defined for JT2, the AIS signal is transmitted when the JT2 port is in the operationalState of locked. The AIS signal may also be transmitted for diagnostic testing.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpJT2TxRaiAlarm 1.3.6.1.4.1.562.2.4.1.12.16.15.1.7
This attribute indicates whether an RAI defect indication pattern is being sent on the out-going JT2 line. The RAI alarm pattern is transmitted in the 4 kbit/s data channel (m-bits) when the port detects a LOS, AIS or LOF alarm condition.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

lpJT2StatsTable 1.3.6.1.4.1.562.2.4.1.12.16.16
This group contains the statistical data for a JT2 component in a digital hierarchy interface.
OBJECT-TYPE    
  SEQUENCE OF  
    LpJT2StatsEntry

lpJT2StatsEntry 1.3.6.1.4.1.562.2.4.1.12.16.16.1
An entry in the lpJT2StatsTable.
OBJECT-TYPE    
  LpJT2StatsEntry  

lpJT2RunningTime 1.3.6.1.4.1.562.2.4.1.12.16.16.1.1
This attribute indicates the number of seconds since the JT2 component was activated and placed in an unlocked state or used for operational testing. All the other error counts that follow as well as each JT2 subcomponent's error counts can be updated when this count is active.
OBJECT-TYPE    
  Counter32  

lpJT2ErrorFreeSec 1.3.6.1.4.1.562.2.4.1.12.16.16.1.2
This attribute indicates the number of seconds that the JT2 port has been in an error free state.
OBJECT-TYPE    
  Counter32  

lpJT2ErroredSec 1.3.6.1.4.1.562.2.4.1.12.16.16.1.3
This attribute indicates the total number of errored seconds for the JT2 port. An errored second is declared when a second with one or more Code Violation Error events, or one or more LOF or LOS defects occur. A code violation error may be a cyclic redundancy check (CRC) error or a bipolar violation (BPV) error.
OBJECT-TYPE    
  Counter32  

lpJT2SevErroredSec 1.3.6.1.4.1.562.2.4.1.12.16.16.1.4
This attribute indicates the total number of severely errored seconds for the JT2 port. A severely errored second occurs when a second with 255 or more Code Violation Error events or one or more LOF or LOS defects occur.
OBJECT-TYPE    
  Counter32  

lpJT2SevErroredFrmSec 1.3.6.1.4.1.562.2.4.1.12.16.16.1.5
This attribute indicates the total number of severely errored framing seconds for the JT2 port. A severely errored framing second occurs when a second with one or more Framing Errors occur.
OBJECT-TYPE    
  Counter32  

lpJT2UnavailSec 1.3.6.1.4.1.562.2.4.1.12.16.16.1.6
This attribute indicates the total number of seconds that the interface has been in an unavailable state. An unavailable state occurs at the onset of 10 consecutive Severely Errored Seconds. When the unavailable state is entered, the 10 Severely Errored Seconds are immediately transfered to the count of unavailableSeconds by incrementing the count of unavailSec by 10 and decrementing the count of sevErroredSec by 10. Whilst in the unavailable state, an unavailableSecond is counted for each SES or SEFS that occurs, and the count of SES and SEFS are both inhibited. The unavailable state is cleared at the onset of 10 consecutive seconds which are not Severely Errored Seconds.
OBJECT-TYPE    
  Counter32  

lpJT2BpvErrors 1.3.6.1.4.1.562.2.4.1.12.16.16.1.7
This attribute indicates the total count of bipolar violations (BPV). A bipolar violation is an error in the alternate mark inversion pattern (AMI) on the line. The value of this attribute will wrap to zero when it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

lpJT2CrcErrors 1.3.6.1.4.1.562.2.4.1.12.16.16.1.8
This attribute indicates the total number of cyclic redundancy check (CRC-5) errors detected on the incoming JT2 line. The value of this attribute will wrap to 0 when its maximum value is reached.
OBJECT-TYPE    
  Counter32  

lpJT2FrameErrors 1.3.6.1.4.1.562.2.4.1.12.16.16.1.9
This attribute indicates the total number of Framing Errors that have occured on the JT2 port. A Framing Error is an error in the framing bits. The value of this attribute will wrap to 0 when its maximum value is reached.
OBJECT-TYPE    
  Counter32  

lpJT2LosStateChanges 1.3.6.1.4.1.562.2.4.1.12.16.16.1.10
This attribute indicates the total number of times that the incoming signal on the JT2 line has been lost. The value of this attribute will wrap to 0 when its maximum value is reached.
OBJECT-TYPE    
  Counter32  

lpJT2AdminInfoTable 1.3.6.1.4.1.562.2.4.1.12.16.17
This group contains the attributes pertaining to the vendor of the equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    LpJT2AdminInfoEntry

lpJT2AdminInfoEntry 1.3.6.1.4.1.562.2.4.1.12.16.17.1
An entry in the lpJT2AdminInfoTable.
OBJECT-TYPE    
  LpJT2AdminInfoEntry  

lpJT2Vendor 1.3.6.1.4.1.562.2.4.1.12.16.17.1.1
This is the name of the vendor supplying the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..20)  

lpJT2CommentText 1.3.6.1.4.1.562.2.4.1.12.16.17.1.2
Any miscellaneous text about the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..60)  

lpHssi 1.3.6.1.4.1.562.2.4.1.12.17
OBJECT IDENTIFIER    

lpHssiRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.17.1
This entry controls the addition and deletion of lpHssi components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpHssiRowStatusEntry

lpHssiRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.17.1.1
A single entry in the table represents a single lpHssi component.
OBJECT-TYPE    
  LpHssiRowStatusEntry  

lpHssiRowStatus 1.3.6.1.4.1.562.2.4.1.12.17.1.1.1
This variable is used as the basis for SNMP naming of lpHssi components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

lpHssiComponentName 1.3.6.1.4.1.562.2.4.1.12.17.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpHssiStorageType 1.3.6.1.4.1.562.2.4.1.12.17.1.1.4
This variable represents the storage type value for the lpHssi tables.
OBJECT-TYPE    
  StorageType  

lpHssiIndex 1.3.6.1.4.1.562.2.4.1.12.17.1.1.10
This variable represents the index for the lpHssi tables.
OBJECT-TYPE    
  Integer32 0..0  

lpHssiTest 1.3.6.1.4.1.562.2.4.1.12.17.2
OBJECT IDENTIFIER    

lpHssiTestRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.17.2.1
This entry controls the addition and deletion of lpHssiTest components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpHssiTestRowStatusEntry

lpHssiTestRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.17.2.1.1
A single entry in the table represents a single lpHssiTest component.
OBJECT-TYPE    
  LpHssiTestRowStatusEntry  

lpHssiTestRowStatus 1.3.6.1.4.1.562.2.4.1.12.17.2.1.1.1
This variable is used as the basis for SNMP naming of lpHssiTest components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpHssiTestComponentName 1.3.6.1.4.1.562.2.4.1.12.17.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpHssiTestStorageType 1.3.6.1.4.1.562.2.4.1.12.17.2.1.1.4
This variable represents the storage type value for the lpHssiTest tables.
OBJECT-TYPE    
  StorageType  

lpHssiTestIndex 1.3.6.1.4.1.562.2.4.1.12.17.2.1.1.10
This variable represents the index for the lpHssiTest tables.
OBJECT-TYPE    
  NonReplicated  

lpHssiTestStateTable 1.3.6.1.4.1.562.2.4.1.12.17.2.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpHssiTestStateEntry

lpHssiTestStateEntry 1.3.6.1.4.1.562.2.4.1.12.17.2.10.1
An entry in the lpHssiTestStateTable.
OBJECT-TYPE    
  LpHssiTestStateEntry  

lpHssiTestAdminState 1.3.6.1.4.1.562.2.4.1.12.17.2.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpHssiTestOperationalState 1.3.6.1.4.1.562.2.4.1.12.17.2.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpHssiTestUsageState 1.3.6.1.4.1.562.2.4.1.12.17.2.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpHssiTestSetupTable 1.3.6.1.4.1.562.2.4.1.12.17.2.11
This group contains all of the operational data for a Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpHssiTestSetupEntry

lpHssiTestSetupEntry 1.3.6.1.4.1.562.2.4.1.12.17.2.11.1
An entry in the lpHssiTestSetupTable.
OBJECT-TYPE    
  LpHssiTestSetupEntry  

lpHssiTestPurpose 1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.1
This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
OBJECT-TYPE    
  AsciiString SIZE(0..40)  

lpHssiTestType 1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.2
This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
OBJECT-TYPE    
  INTEGER card(0), manual(1), localLoop(2), remoteLoop(3), externalLoop(4), payloadLoop(5), remoteLoopThisTrib(6), v54RemoteLoop(7), pn127RemoteLoop(8)  

lpHssiTestFrmSize 1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.3
This attribute defines the size of the test data frames in number of bytes.
OBJECT-TYPE    
  Unsigned32 4..4096  

lpHssiTestFrmPatternType 1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.4
This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
OBJECT-TYPE    
  INTEGER ccitt32kBitPattern(0), ccitt8MBitPattern(1), customizedPattern(2)  

lpHssiTestCustomizedPattern 1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.5
This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
OBJECT-TYPE    
  Hex 0..4294967295  

lpHssiTestDataStartDelay 1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.6
This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
OBJECT-TYPE    
  Unsigned32 0..1814400  

lpHssiTestDisplayInterval 1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.7
This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
OBJECT-TYPE    
  Unsigned32 0..30240  

lpHssiTestDuration 1.3.6.1.4.1.562.2.4.1.12.17.2.11.1.8
This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
OBJECT-TYPE    
  Unsigned32 1..30240  

lpHssiTestResultsTable 1.3.6.1.4.1.562.2.4.1.12.17.2.12
This group contains all the statistics related attributes of the Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpHssiTestResultsEntry

lpHssiTestResultsEntry 1.3.6.1.4.1.562.2.4.1.12.17.2.12.1
An entry in the lpHssiTestResultsTable.
OBJECT-TYPE    
  LpHssiTestResultsEntry  

lpHssiTestElapsedTime 1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.1
This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
OBJECT-TYPE    
  Counter32  

lpHssiTestTimeRemaining 1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.2
This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

lpHssiTestCauseOfTermination 1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.3
This attribute records the reason the test is terminated.
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4), hardwareReconfigured(5)  

lpHssiTestBitsTx 1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.4
This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpHssiTestBytesTx 1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.5
This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpHssiTestFrmTx 1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.6
This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpHssiTestBitsRx 1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.7
This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpHssiTestBytesRx 1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.8
This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpHssiTestFrmRx 1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.9
This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

lpHssiTestErroredFrmRx 1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.10
This attribute counts the errored frames received during the test period. This counter is not expected to reach its maximum value. The counter wraps to 0 if it exceeds its maximum value. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
OBJECT-TYPE    
  PassportCounter64  

lpHssiTestBitErrorRate 1.3.6.1.4.1.562.2.4.1.12.17.2.12.1.11
This attribute indicates the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component tries to estimate the number of bit errors in any errored frame which is identifiable. The statistics are updated accordingly. A lost frame (possibly due to an error on the flag sequence) is not used for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa; and syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results. This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface.
OBJECT-TYPE    
  AsciiString SIZE(5)  

lpHssiProvTable 1.3.6.1.4.1.562.2.4.1.12.17.10
This group contains the specific provisioning data for a Hssi component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpHssiProvEntry

lpHssiProvEntry 1.3.6.1.4.1.562.2.4.1.12.17.10.1
An entry in the lpHssiProvTable.
OBJECT-TYPE    
  LpHssiProvEntry  

lpHssiLinkMode 1.3.6.1.4.1.562.2.4.1.12.17.10.1.1
This attribute defines the intended gender of the HSSI port. The actual gender of the port is determined by the hardware setup. In dte mode, the ta line signal is driven as specified by the attribute readyLineState when the HSSI port passes its diagnostics. The ta line signal is then driven as specified by the attribute dataTransferLineState when the application is ready to transfer data. On the other hand, the input line signal ca is compared against those specified in the attributes readyLineState and dataTransferLineState. The application will be notified when the specified input line states are observed. In dce mode, the Hssi component behaves similarly as when it is in dte mode. However, it will be driving the dce line signal (ca) and monitoring the dte line signal (ta) as specified by the attributes readyLineState and dataTransferLineState.
OBJECT-TYPE    
  INTEGER dte(0), dce(128)  

lpHssiReadyLineState 1.3.6.1.4.1.562.2.4.1.12.17.10.1.2
This attribute specifies the line signal originating from the HSSI interface that will always be turned on, provided the HSSI interface passes it diagnostics. This set of signal is generally required for maintaining the connection. Note that both dte and dce signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the operational attribute actualLinkMode. See also linkMode. Description of bits: ca(0) ta(1)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpHssiDataTransferLineState 1.3.6.1.4.1.562.2.4.1.12.17.10.1.3
This attribute specifies the line signals required to indicate that the external equipment is in a good state (that is, data transfer can proceed). Note that both dte and dce signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the operational attribute actualLinkMode. The value of this attribute must be a superset of that of the readyLineState attribute. See also linkMode. Description of bits: ca(0) ta(1)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpHssiLineSpeed 1.3.6.1.4.1.562.2.4.1.12.17.10.1.5
This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a clock. Note that the actual clock rate are available in the operational attributes actualTxLineSpeed and actualRxLineSpeed.
OBJECT-TYPE    
  Unsigned32 1000000..50000000  

lpHssiApplicationFramerName 1.3.6.1.4.1.562.2.4.1.12.17.10.1.7
This attribute contains the component name of a Framer which is associated with the Hssi component.
OBJECT-TYPE    
  Link  

lpHssiCidDataTable 1.3.6.1.4.1.562.2.4.1.12.17.11
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    LpHssiCidDataEntry

lpHssiCidDataEntry 1.3.6.1.4.1.562.2.4.1.12.17.11.1
An entry in the lpHssiCidDataTable.
OBJECT-TYPE    
  LpHssiCidDataEntry  

lpHssiCustomerIdentifier 1.3.6.1.4.1.562.2.4.1.12.17.11.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

lpHssiAdminInfoTable 1.3.6.1.4.1.562.2.4.1.12.17.12
This group contains the attributes pertaining to the vendor of the equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    LpHssiAdminInfoEntry

lpHssiAdminInfoEntry 1.3.6.1.4.1.562.2.4.1.12.17.12.1
An entry in the lpHssiAdminInfoTable.
OBJECT-TYPE    
  LpHssiAdminInfoEntry  

lpHssiVendor 1.3.6.1.4.1.562.2.4.1.12.17.12.1.1
This is the name of the vendor supplying the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..20)  

lpHssiCommentText 1.3.6.1.4.1.562.2.4.1.12.17.12.1.2
Any miscellaneous text about the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..60)  

lpHssiIfEntryTable 1.3.6.1.4.1.562.2.4.1.12.17.13
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    LpHssiIfEntryEntry

lpHssiIfEntryEntry 1.3.6.1.4.1.562.2.4.1.12.17.13.1
An entry in the lpHssiIfEntryTable.
OBJECT-TYPE    
  LpHssiIfEntryEntry  

lpHssiIfAdminStatus 1.3.6.1.4.1.562.2.4.1.12.17.13.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpHssiIfIndex 1.3.6.1.4.1.562.2.4.1.12.17.13.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

lpHssiOperStatusTable 1.3.6.1.4.1.562.2.4.1.12.17.14
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpHssiOperStatusEntry

lpHssiOperStatusEntry 1.3.6.1.4.1.562.2.4.1.12.17.14.1
An entry in the lpHssiOperStatusTable.
OBJECT-TYPE    
  LpHssiOperStatusEntry  

lpHssiSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.12.17.14.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

lpHssiStateTable 1.3.6.1.4.1.562.2.4.1.12.17.15
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpHssiStateEntry

lpHssiStateEntry 1.3.6.1.4.1.562.2.4.1.12.17.15.1
An entry in the lpHssiStateTable.
OBJECT-TYPE    
  LpHssiStateEntry  

lpHssiAdminState 1.3.6.1.4.1.562.2.4.1.12.17.15.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpHssiOperationalState 1.3.6.1.4.1.562.2.4.1.12.17.15.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpHssiUsageState 1.3.6.1.4.1.562.2.4.1.12.17.15.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpHssiAvailabilityStatus 1.3.6.1.4.1.562.2.4.1.12.17.15.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

lpHssiProceduralStatus 1.3.6.1.4.1.562.2.4.1.12.17.15.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpHssiControlStatus 1.3.6.1.4.1.562.2.4.1.12.17.15.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpHssiAlarmStatus 1.3.6.1.4.1.562.2.4.1.12.17.15.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpHssiStandbyStatus 1.3.6.1.4.1.562.2.4.1.12.17.15.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

lpHssiUnknownStatus 1.3.6.1.4.1.562.2.4.1.12.17.15.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

lpHssiOperTable 1.3.6.1.4.1.562.2.4.1.12.17.16
This group contains all specific operational data for a Hssi component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpHssiOperEntry

lpHssiOperEntry 1.3.6.1.4.1.562.2.4.1.12.17.16.1
An entry in the lpHssiOperTable.
OBJECT-TYPE    
  LpHssiOperEntry  

lpHssiActualLinkMode 1.3.6.1.4.1.562.2.4.1.12.17.16.1.1
This attribute contains the actual link mode defined by the hardware. Note that the hardware overrides the provisionable data. The port behaves as a dce or dte according to the actualLinkMode.
OBJECT-TYPE    
  INTEGER dte(0), dce(128)  

lpHssiLineState 1.3.6.1.4.1.562.2.4.1.12.17.16.1.2
This attribute contains the state of the interface signals. Description of bits: ca(0) ta(1) tm(2) la(3) lb(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpHssiActualTxLineSpeed 1.3.6.1.4.1.562.2.4.1.12.17.16.1.3
This attribute is the measured speed of the transmit clock. Note the reported transmit speed is in an error of +/- 10000 bit/s
OBJECT-TYPE    
  Gauge32 0..4294967295  

lpHssiActualRxLineSpeed 1.3.6.1.4.1.562.2.4.1.12.17.16.1.4
This attribute is the measured speed of the receive clock. Note the reported receive speed is in an error of +/- 10000 bit/s
OBJECT-TYPE    
  Gauge32 0..4294967295  

lpHssiDataXferStateChanges 1.3.6.1.4.1.562.2.4.1.12.17.16.1.5
This attribute contains the number of times that the line has entered or exited the data transfer state.
OBJECT-TYPE    
  Counter32  

lpEng 1.3.6.1.4.1.562.2.4.1.12.23
OBJECT IDENTIFIER    

lpEngRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.23.1
This entry controls the addition and deletion of lpEng components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEngRowStatusEntry

lpEngRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.23.1.1
A single entry in the table represents a single lpEng component.
OBJECT-TYPE    
  LpEngRowStatusEntry  

lpEngRowStatus 1.3.6.1.4.1.562.2.4.1.12.23.1.1.1
This variable is used as the basis for SNMP naming of lpEng components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

lpEngComponentName 1.3.6.1.4.1.562.2.4.1.12.23.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEngStorageType 1.3.6.1.4.1.562.2.4.1.12.23.1.1.4
This variable represents the storage type value for the lpEng tables.
OBJECT-TYPE    
  StorageType  

lpEngIndex 1.3.6.1.4.1.562.2.4.1.12.23.1.1.10
This variable represents the index for the lpEng tables.
OBJECT-TYPE    
  NonReplicated  

lpEngDs 1.3.6.1.4.1.562.2.4.1.12.23.2
OBJECT IDENTIFIER    

lpEngDsRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.23.2.1
This entry controls the addition and deletion of lpEngDs components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEngDsRowStatusEntry

lpEngDsRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.23.2.1.1
A single entry in the table represents a single lpEngDs component.
OBJECT-TYPE    
  LpEngDsRowStatusEntry  

lpEngDsRowStatus 1.3.6.1.4.1.562.2.4.1.12.23.2.1.1.1
This variable is used as the basis for SNMP naming of lpEngDs components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

lpEngDsComponentName 1.3.6.1.4.1.562.2.4.1.12.23.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEngDsStorageType 1.3.6.1.4.1.562.2.4.1.12.23.2.1.1.4
This variable represents the storage type value for the lpEngDs tables.
OBJECT-TYPE    
  StorageType  

lpEngDsIndex 1.3.6.1.4.1.562.2.4.1.12.23.2.1.1.10
This variable represents the index for the lpEngDs tables.
OBJECT-TYPE    
  INTEGER accounting(0), alarm(1), log(2), debug(3), scn(4), trap(5), stats(6)  

lpEngDsOv 1.3.6.1.4.1.562.2.4.1.12.23.2.2
OBJECT IDENTIFIER    

lpEngDsOvRowStatusTable 1.3.6.1.4.1.562.2.4.1.12.23.2.2.1
This entry controls the addition and deletion of lpEngDsOv components.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEngDsOvRowStatusEntry

lpEngDsOvRowStatusEntry 1.3.6.1.4.1.562.2.4.1.12.23.2.2.1.1
A single entry in the table represents a single lpEngDsOv component.
OBJECT-TYPE    
  LpEngDsOvRowStatusEntry  

lpEngDsOvRowStatus 1.3.6.1.4.1.562.2.4.1.12.23.2.2.1.1.1
This variable is used as the basis for SNMP naming of lpEngDsOv components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

lpEngDsOvComponentName 1.3.6.1.4.1.562.2.4.1.12.23.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

lpEngDsOvStorageType 1.3.6.1.4.1.562.2.4.1.12.23.2.2.1.1.4
This variable represents the storage type value for the lpEngDsOv tables.
OBJECT-TYPE    
  StorageType  

lpEngDsOvIndex 1.3.6.1.4.1.562.2.4.1.12.23.2.2.1.1.10
This variable represents the index for the lpEngDsOv tables.
OBJECT-TYPE    
  NonReplicated  

lpEngDsOvProvTable 1.3.6.1.4.1.562.2.4.1.12.23.2.2.10
This group contains provisionable attributes for the DataStream Ov components under Lp Engineering. DESCRIPTION
OBJECT-TYPE    
  SEQUENCE OF  
    LpEngDsOvProvEntry

lpEngDsOvProvEntry 1.3.6.1.4.1.562.2.4.1.12.23.2.2.10.1
An entry in the lpEngDsOvProvTable.
OBJECT-TYPE    
  LpEngDsOvProvEntry  

lpEngDsOvAgentQueueSize 1.3.6.1.4.1.562.2.4.1.12.23.2.2.10.1.1
This attribute specifies the maximum size of the DCS Agent's queue for this data stream on this LP. For more details on the defaults and other information, refer to the parent component's agentQueueSize attribute. The size should be set to 0 if absolutely no data is to be accepted from applications. There are threshold alarms based on the value of the Agent's currentQueueSize attribute (a Set when the queue becomes 75% full and a Clear after dropping back to 50% full). To properly determine what to set this to, consult the 'Magellan Passport Engineering Notes and Guidelines'.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

lpEngDsOperTable 1.3.6.1.4.1.562.2.4.1.12.23.2.10
This group contains operational attributes for the DataStream components under Lp Engineering.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEngDsOperEntry

lpEngDsOperEntry 1.3.6.1.4.1.562.2.4.1.12.23.2.10.1
An entry in the lpEngDsOperTable.
OBJECT-TYPE    
  LpEngDsOperEntry  

lpEngDsAgentQueueSize 1.3.6.1.4.1.562.2.4.1.12.23.2.10.1.1
This attribute indicates the maximum size of the DCS Agent queue size maximum for a DCS data stream on the LP. It is the maximum size to which the Agent's currentQueueSize can grow. When the queue is full and more data is offered to the Agent, it will be discarded. The following are the system defaults (in number of records): - alarm: 100 - accounting: 10000 - debug: 0 - log: 50 - scn: 200 - trap: 50 - stats: 0 To override the system defaults, see Lp Eng Ds Ov's agentQueueSize attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

lpProvTable 1.3.6.1.4.1.562.2.4.1.12.100
This Group contains the provisionable attributes for the LP component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpProvEntry

lpProvEntry 1.3.6.1.4.1.562.2.4.1.12.100.1
An entry in the lpProvTable.
OBJECT-TYPE    
  LpProvEntry  

lpMainCard 1.3.6.1.4.1.562.2.4.1.12.100.1.1
This is the preferred processor card on which this LP should be assigned.
OBJECT-TYPE    
  Link  

lpSpareCard 1.3.6.1.4.1.562.2.4.1.12.100.1.2
This is the spare processor card on which this LP should be assigned.
OBJECT-TYPE    
  Link  

lpLogicalProcessorType 1.3.6.1.4.1.562.2.4.1.12.100.1.3
This is the Logical Processor Type (LPT) that determines which software this LP will run.
OBJECT-TYPE    
  Link  

lpCidDataTable 1.3.6.1.4.1.562.2.4.1.12.101
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    LpCidDataEntry

lpCidDataEntry 1.3.6.1.4.1.562.2.4.1.12.101.1
An entry in the lpCidDataTable.
OBJECT-TYPE    
  LpCidDataEntry  

lpCustomerIdentifier 1.3.6.1.4.1.562.2.4.1.12.101.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

lpStateTable 1.3.6.1.4.1.562.2.4.1.12.102
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    LpStateEntry

lpStateEntry 1.3.6.1.4.1.562.2.4.1.12.102.1
An entry in the lpStateTable.
OBJECT-TYPE    
  LpStateEntry  

lpAdminState 1.3.6.1.4.1.562.2.4.1.12.102.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

lpOperationalState 1.3.6.1.4.1.562.2.4.1.12.102.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

lpUsageState 1.3.6.1.4.1.562.2.4.1.12.102.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

lpAvailabilityStatus 1.3.6.1.4.1.562.2.4.1.12.102.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

lpProceduralStatus 1.3.6.1.4.1.562.2.4.1.12.102.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpControlStatus 1.3.6.1.4.1.562.2.4.1.12.102.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpAlarmStatus 1.3.6.1.4.1.562.2.4.1.12.102.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpStandbyStatus 1.3.6.1.4.1.562.2.4.1.12.102.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

lpUnknownStatus 1.3.6.1.4.1.562.2.4.1.12.102.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

lpOperTable 1.3.6.1.4.1.562.2.4.1.12.103
This Group contains the operational attributes for the LP component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpOperEntry

lpOperEntry 1.3.6.1.4.1.562.2.4.1.12.103.1
An entry in the lpOperTable.
OBJECT-TYPE    
  LpOperEntry  

lpActiveCard 1.3.6.1.4.1.562.2.4.1.12.103.1.1
This attribute indicates on which card this LP is currently running (if any).
OBJECT-TYPE    
  RowPointer  

lpMainCardStatus 1.3.6.1.4.1.562.2.4.1.12.103.1.2
This attribute specifies the status of this LP's main card. The following values have been defined: notProvisioned No main card has been provisioned notAvailable The main card is not available available The main card is available (running as standby) active The main card is running as active
OBJECT-TYPE    
  INTEGER notProvisioned(0), notAvailable(1), available(3), active(4)  

lpSpareCardStatus 1.3.6.1.4.1.562.2.4.1.12.103.1.3
This attribute specifies the status of this LP's spare card. The following values have been defined: notProvisioned No spare card has been provisioned notAvailable The spare card is not available alreadyInUse The spare card is already in use by another LP available The spare card is available (running as standby) active The spare card is running as active
OBJECT-TYPE    
  INTEGER notProvisioned(0), notAvailable(1), alreadyInUse(2), available(3), active(4)  

lpRestartOnCpSwitch 1.3.6.1.4.1.562.2.4.1.12.103.1.4
This attribute indicates whether the Lp always restarts upon a CP switchover. The value is true if the featureList of the associated Sw Lpt component contains a feature that does not support hitless CP switchover. The value is also true when the feature noHitlessCpSwitch is provisioned on the CP. A value of false does not guarantee 'no restart'; dynamic conditions may still result in an FP restart when a CP switchover occurs.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

lpScheduledSwitchover 1.3.6.1.4.1.562.2.4.1.12.103.1.5
This attribute indicates the execution time of the scheduled switchover. When there is no switchover scheduled the time is equals to 0 (0000-00-00 00:00).
OBJECT-TYPE    
  EnterpriseDateAndTime SIZE(0 | 16)  

lpUtilTable 1.3.6.1.4.1.562.2.4.1.12.104
This group contains the operational attributes that specify the processor's utilization levels. When this group exists for an LP component, the attributes are representative of the active card.
OBJECT-TYPE    
  SEQUENCE OF  
    LpUtilEntry

lpUtilEntry 1.3.6.1.4.1.562.2.4.1.12.104.1
An entry in the lpUtilTable.
OBJECT-TYPE    
  LpUtilEntry  

lpTimeInterval 1.3.6.1.4.1.562.2.4.1.12.104.1.1
This attribute indicates the time period (in minutes) for which the average, minimum and maximum utilization values are calculated. This attribute is reset to 0 every 15 minutes.
OBJECT-TYPE    
  Unsigned32 0..15  

lpCpuUtil 1.3.6.1.4.1.562.2.4.1.12.104.1.2
This attribute indicates an approximation of the current processor utilization level (expressed as a percentage).
OBJECT-TYPE    
  Gauge32 0..100  

lpCpuUtilAvg 1.3.6.1.4.1.562.2.4.1.12.104.1.3
This attribute indicates an average processor utilization level over the specified time period, timeInterval. This average is calculated based on one minute CPU utilization averages.
OBJECT-TYPE    
  Gauge32 0..100  

lpCpuUtilAvgMin 1.3.6.1.4.1.562.2.4.1.12.104.1.4
This attribute indicates the minimum processor utilization level over a specified time period, timeInterval. This is based on one minute CPU utilization averages.
OBJECT-TYPE    
  Gauge32 0..100  

lpCpuUtilAvgMax 1.3.6.1.4.1.562.2.4.1.12.104.1.5
This attribute indicates the maximum processor utilization level over a specified time period, timeInterval. This is based on one minute CPU utilization averages.
OBJECT-TYPE    
  Gauge32 0..100  

lpMsgBlockUsage 1.3.6.1.4.1.562.2.4.1.12.104.1.6
This attribute indicates the processor's current shared message block memory utilization (in kilobytes). If there is no shared memory on the card, this attribute indicates 0.
OBJECT-TYPE    
  Gauge32 0..2147483647  

lpMsgBlockUsageAvg 1.3.6.1.4.1.562.2.4.1.12.104.1.7
This attribute indicates the processor's average memory utilization (in kilobytes) of shared message blocks, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this average memory utilization is reset to the current usage, sharedMsgBlockUsage. If there is no shared memory on the card, this attribute indicates 0.
OBJECT-TYPE    
  Gauge32 0..2147483647  

lpMsgBlockUsageAvgMin 1.3.6.1.4.1.562.2.4.1.12.104.1.8
This attribute indicates the processor's minimum memory utilization (in kilobytes) of shared message blocks, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this minimum memory utilization is reset to the current usage, sharedMsgBlockUsage. If there is no shared memory on the card, this attribute indicates 0.
OBJECT-TYPE    
  Gauge32 0..2147483647  

lpMsgBlockUsageAvgMax 1.3.6.1.4.1.562.2.4.1.12.104.1.9
This attribute indicates the processor's maximum memory utilization (in kilobytes) of shared message blocks, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this maximum memory utilization is reset to the current usage, sharedMsgBlockUsage. If there is no shared memory on the card, this attribute indicates 0.
OBJECT-TYPE    
  Gauge32 0..2147483647  

lpLocalMsgBlockUsage 1.3.6.1.4.1.562.2.4.1.12.104.1.10
This attribute indicates the processor's current memory utilization (in kilobytes) of message blocks which are used for local messaging on the card.
OBJECT-TYPE    
  Gauge32 0..2147483647  

lpLocalMsgBlockUsageAvg 1.3.6.1.4.1.562.2.4.1.12.104.1.11
This attribute indicates the processor's average memory utilization (in kilobytes) of message blocks used for local messaging on the card, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this average memory utilization is reset to the current usage, localMsgBlockUsage.
OBJECT-TYPE    
  Gauge32 0..2147483647  

lpLocalMsgBlockUsageMin 1.3.6.1.4.1.562.2.4.1.12.104.1.12
This attribute indicates the processor's minimum memory utilization (in kilobytes) of message blocks used for local messaging on the card, calculated over a specified time period, timeInterval. This utilization value is updated at 15 second intervals. At the start of each timeInterval, this minimum memory utilization is reset to the current usage, localMsgBlockUsage.
OBJECT-TYPE    
  Gauge32 0..2147483647  

lpLocalMsgBlockUsageMax 1.3.6.1.4.1.562.2.4.1.12.104.1.13
This attribute indicates the processor's maximum memory utilization (in kilobytes) of message blocks used for local messaging on the card, calculated over a specified time period, timeInterval. This utilization value is updated at 15 second intervals. At the start of each timeInterval, this maximum memory utilization is reset to the current usage, localMsgBlockUsage.
OBJECT-TYPE    
  Gauge32 0..2147483647  

lpCapTable 1.3.6.1.4.1.562.2.4.1.12.105
This group contains the operational attributes that specify the processor's capacity levels. When this group exists for an LP component, the attributes are representative of the active Card.
OBJECT-TYPE    
  SEQUENCE OF  
    LpCapEntry

lpCapEntry 1.3.6.1.4.1.562.2.4.1.12.105.1
An entry in the lpCapTable.
OBJECT-TYPE    
  LpCapEntry  

lpMsgBlockCapacity 1.3.6.1.4.1.562.2.4.1.12.105.1.1
This attribute indicates the processor card's shared message block memory capacity (in kilobytes).
OBJECT-TYPE    
  Unsigned32 0..2147483647  

lpLocalMsgBlockCapacity 1.3.6.1.4.1.562.2.4.1.12.105.1.2
This attribute indicates the processor card's local message block memory capacity (in kilobytes). These message blocks are used for local messaging on the card.
OBJECT-TYPE    
  Unsigned32 0..2147483647  

lpLinkToApplicationsTable 1.3.6.1.4.1.562.2.4.1.12.242
This attribute allows applications to link themselves directly to the LP component.
OBJECT-TYPE    
  SEQUENCE OF  
    LpLinkToApplicationsEntry

lpLinkToApplicationsEntry 1.3.6.1.4.1.562.2.4.1.12.242.1
An entry in the lpLinkToApplicationsTable.
OBJECT-TYPE    
  LpLinkToApplicationsEntry  

lpLinkToApplicationsValue 1.3.6.1.4.1.562.2.4.1.12.242.1.1
This variable represents both the value and the index for the lpLinkToApplicationsTable.
OBJECT-TYPE    
  Link  

lpMemoryCapacityTable 1.3.6.1.4.1.562.2.4.1.12.244
This attribute indicates the processor card's memory capacity (in kilobytes) for each type of memory.
OBJECT-TYPE    
  SEQUENCE OF  
    LpMemoryCapacityEntry

lpMemoryCapacityEntry 1.3.6.1.4.1.562.2.4.1.12.244.1
An entry in the lpMemoryCapacityTable.
OBJECT-TYPE    
  LpMemoryCapacityEntry  

lpMemoryCapacityIndex 1.3.6.1.4.1.562.2.4.1.12.244.1.1
This variable represents the lpMemoryCapacityTable specific index for the lpMemoryCapacityTable.
OBJECT-TYPE    
  INTEGER fastRam(0), normalRam(1), sharedRam(2)  

lpMemoryCapacityValue 1.3.6.1.4.1.562.2.4.1.12.244.1.2
This variable represents an individual value for the lpMemoryCapacityTable.
OBJECT-TYPE    
  Unsigned32 0..2147483647  

lpMemoryUsageTable 1.3.6.1.4.1.562.2.4.1.12.245
This attribute indicates the processor's current memory utilization (in kilobytes) for each type of memory.
OBJECT-TYPE    
  SEQUENCE OF  
    LpMemoryUsageEntry

lpMemoryUsageEntry 1.3.6.1.4.1.562.2.4.1.12.245.1
An entry in the lpMemoryUsageTable.
OBJECT-TYPE    
  LpMemoryUsageEntry  

lpMemoryUsageIndex 1.3.6.1.4.1.562.2.4.1.12.245.1.1
This variable represents the lpMemoryUsageTable specific index for the lpMemoryUsageTable.
OBJECT-TYPE    
  INTEGER fastRam(0), normalRam(1), sharedRam(2)  

lpMemoryUsageValue 1.3.6.1.4.1.562.2.4.1.12.245.1.2
This variable represents an individual value for the lpMemoryUsageTable.
OBJECT-TYPE    
  Gauge32 0..2147483647  

lpMemoryUsageAvgTable 1.3.6.1.4.1.562.2.4.1.12.276
This attribute indicates the processor's average memory utilization (in kilobytes) for each type of memory in the specified time period, timeInterval. This value is calculated using 15 second samples.
OBJECT-TYPE    
  SEQUENCE OF  
    LpMemoryUsageAvgEntry

lpMemoryUsageAvgEntry 1.3.6.1.4.1.562.2.4.1.12.276.1
An entry in the lpMemoryUsageAvgTable.
OBJECT-TYPE    
  LpMemoryUsageAvgEntry  

lpMemoryUsageAvgIndex 1.3.6.1.4.1.562.2.4.1.12.276.1.1
This variable represents the lpMemoryUsageAvgTable specific index for the lpMemoryUsageAvgTable.
OBJECT-TYPE    
  INTEGER fastRam(0), normalRam(1), sharedRam(2)  

lpMemoryUsageAvgValue 1.3.6.1.4.1.562.2.4.1.12.276.1.2
This variable represents an individual value for the lpMemoryUsageAvgTable.
OBJECT-TYPE    
  Gauge32 0..2147483647  

lpMemoryUsageAvgMinTable 1.3.6.1.4.1.562.2.4.1.12.277
This attribute indicates the processor's minimum memory utilization (in kilobytes) for each type of memory in the specified time period, timeInterval. This value is calculated using 15 second samples.
OBJECT-TYPE    
  SEQUENCE OF  
    LpMemoryUsageAvgMinEntry

lpMemoryUsageAvgMinEntry 1.3.6.1.4.1.562.2.4.1.12.277.1
An entry in the lpMemoryUsageAvgMinTable.
OBJECT-TYPE    
  LpMemoryUsageAvgMinEntry  

lpMemoryUsageAvgMinIndex 1.3.6.1.4.1.562.2.4.1.12.277.1.1
This variable represents the lpMemoryUsageAvgMinTable specific index for the lpMemoryUsageAvgMinTable.
OBJECT-TYPE    
  INTEGER fastRam(0), normalRam(1), sharedRam(2)  

lpMemoryUsageAvgMinValue 1.3.6.1.4.1.562.2.4.1.12.277.1.2
This variable represents an individual value for the lpMemoryUsageAvgMinTable.
OBJECT-TYPE    
  Gauge32 0..2147483647  

lpMemoryUsageAvgMaxTable 1.3.6.1.4.1.562.2.4.1.12.278
This attribute indicates the processor's maximum memory utilization (in kilobytes) for each type of memory in the specified time period, timeInterval. This value is calculated using 15 second samples.
OBJECT-TYPE    
  SEQUENCE OF  
    LpMemoryUsageAvgMaxEntry

lpMemoryUsageAvgMaxEntry 1.3.6.1.4.1.562.2.4.1.12.278.1
An entry in the lpMemoryUsageAvgMaxTable.
OBJECT-TYPE    
  LpMemoryUsageAvgMaxEntry  

lpMemoryUsageAvgMaxIndex 1.3.6.1.4.1.562.2.4.1.12.278.1.1
This variable represents the lpMemoryUsageAvgMaxTable specific index for the lpMemoryUsageAvgMaxTable.
OBJECT-TYPE    
  INTEGER fastRam(0), normalRam(1), sharedRam(2)  

lpMemoryUsageAvgMaxValue 1.3.6.1.4.1.562.2.4.1.12.278.1.2
This variable represents an individual value for the lpMemoryUsageAvgMaxTable.
OBJECT-TYPE    
  Gauge32 0..2147483647  

logicalProcessorMIB 1.3.6.1.4.1.562.2.4.2.11
OBJECT IDENTIFIER    

logicalProcessorGroup 1.3.6.1.4.1.562.2.4.2.11.1
OBJECT IDENTIFIER    

logicalProcessorGroupBE 1.3.6.1.4.1.562.2.4.2.11.1.5
OBJECT IDENTIFIER    

logicalProcessorGroupBE01 1.3.6.1.4.1.562.2.4.2.11.1.5.2
OBJECT IDENTIFIER    

logicalProcessorGroupBE01A 1.3.6.1.4.1.562.2.4.2.11.1.5.2.2
OBJECT IDENTIFIER    

logicalProcessorCapabilities 1.3.6.1.4.1.562.2.4.2.11.3
OBJECT IDENTIFIER    

logicalProcessorCapabilitiesBE 1.3.6.1.4.1.562.2.4.2.11.3.5
OBJECT IDENTIFIER    

logicalProcessorCapabilitiesBE01 1.3.6.1.4.1.562.2.4.2.11.3.5.2
OBJECT IDENTIFIER    

logicalProcessorCapabilitiesBE01A 1.3.6.1.4.1.562.2.4.2.11.3.5.2.2
OBJECT IDENTIFIER    

Defined Objects

LpRowStatusEntry  
SEQUENCE    
  RowStatus as lpRowStatus  
  DisplayString as lpComponentName  
  StorageType as lpStorageType  
  Integer32 as lpIndex  

LpProvEntry  
SEQUENCE    
  Link as lpMainCard  
  Link as lpSpareCard  
  Link as lpLogicalProcessorType  

LpCidDataEntry  
SEQUENCE    
  Unsigned32 as lpCustomerIdentifier  

LpStateEntry  
SEQUENCE    
  INTEGER as lpAdminState  
  INTEGER as lpOperationalState  
  INTEGER as lpUsageState  
  OCTET STRING as lpAvailabilityStatus  
  OCTET STRING as lpProceduralStatus  
  OCTET STRING as lpControlStatus  
  OCTET STRING as lpAlarmStatus  
  INTEGER as lpStandbyStatus  
  INTEGER as lpUnknownStatus  

LpOperEntry  
SEQUENCE    
  RowPointer as lpActiveCard  
  INTEGER as lpMainCardStatus  
  INTEGER as lpSpareCardStatus  
  INTEGER as lpRestartOnCpSwitch  
  EnterpriseDateAndTime as lpScheduledSwitchover  

LpUtilEntry  
SEQUENCE    
  Unsigned32 as lpTimeInterval  
  Gauge32 as lpCpuUtil  
  Gauge32 as lpCpuUtilAvg  
  Gauge32 as lpCpuUtilAvgMin  
  Gauge32 as lpCpuUtilAvgMax  
  Gauge32 as lpMsgBlockUsage  
  Gauge32 as lpMsgBlockUsageAvg  
  Gauge32 as lpMsgBlockUsageAvgMin  
  Gauge32 as lpMsgBlockUsageAvgMax  
  Gauge32 as lpLocalMsgBlockUsage  
  Gauge32 as lpLocalMsgBlockUsageAvg  
  Gauge32 as lpLocalMsgBlockUsageMin  
  Gauge32 as lpLocalMsgBlockUsageMax  

LpCapEntry  
SEQUENCE    
  Unsigned32 as lpMsgBlockCapacity  
  Unsigned32 as lpLocalMsgBlockCapacity  

LpLinkToApplicationsEntry  
SEQUENCE    
  Link as lpLinkToApplicationsValue  

LpMemoryCapacityEntry  
SEQUENCE    
  INTEGER as lpMemoryCapacityIndex  
  Unsigned32 as lpMemoryCapacityValue  

LpMemoryUsageEntry  
SEQUENCE    
  INTEGER as lpMemoryUsageIndex  
  Gauge32 as lpMemoryUsageValue  

LpMemoryUsageAvgEntry  
SEQUENCE    
  INTEGER as lpMemoryUsageAvgIndex  
  Gauge32 as lpMemoryUsageAvgValue  

LpMemoryUsageAvgMinEntry  
SEQUENCE    
  INTEGER as lpMemoryUsageAvgMinIndex  
  Gauge32 as lpMemoryUsageAvgMinValue  

LpMemoryUsageAvgMaxEntry  
SEQUENCE    
  INTEGER as lpMemoryUsageAvgMaxIndex  
  Gauge32 as lpMemoryUsageAvgMaxValue  

LpDS3RowStatusEntry  
SEQUENCE    
  RowStatus as lpDS3RowStatus  
  DisplayString as lpDS3ComponentName  
  StorageType as lpDS3StorageType  
  Integer32 as lpDS3Index  

LpDS3ProvEntry  
SEQUENCE    
  INTEGER as lpDS3CbitParity  
  Unsigned32 as lpDS3LineLength  
  INTEGER as lpDS3ClockingSource  
  Link as lpDS3ApplicationFramerName  
  INTEGER as lpDS3Mapping  

LpDS3CidDataEntry  
SEQUENCE    
  Unsigned32 as lpDS3CustomerIdentifier  

LpDS3AdminInfoEntry  
SEQUENCE    
  AsciiString as lpDS3Vendor  
  AsciiString as lpDS3CommentText  

LpDS3IfEntryEntry  
SEQUENCE    
  INTEGER as lpDS3IfAdminStatus  
  InterfaceIndex as lpDS3IfIndex  

LpDS3OperStatusEntry  
SEQUENCE    
  INTEGER as lpDS3SnmpOperStatus  

LpDS3StateEntry  
SEQUENCE    
  INTEGER as lpDS3AdminState  
  INTEGER as lpDS3OperationalState  
  INTEGER as lpDS3UsageState  
  OCTET STRING as lpDS3AvailabilityStatus  
  OCTET STRING as lpDS3ProceduralStatus  
  OCTET STRING as lpDS3ControlStatus  
  OCTET STRING as lpDS3AlarmStatus  
  INTEGER as lpDS3StandbyStatus  
  INTEGER as lpDS3UnknownStatus  

LpDS3OperEntry  
SEQUENCE    
  INTEGER as lpDS3LosAlarm  
  INTEGER as lpDS3LofAlarm  
  INTEGER as lpDS3RxAisAlarm  
  INTEGER as lpDS3RxRaiAlarm  
  INTEGER as lpDS3RxIdle  
  INTEGER as lpDS3TxAis  
  INTEGER as lpDS3TxRai  
  INTEGER as lpDS3TxIdle  

LpDS3StatsEntry  
SEQUENCE    
  Counter32 as lpDS3RunningTime  
  Counter32 as lpDS3ErrorFreeSec  
  Counter32 as lpDS3LineCodeViolations  
  Counter32 as lpDS3LineErroredSec  
  Counter32 as lpDS3LineSevErroredSec  
  Counter32 as lpDS3LineLosSec  
  Counter32 as lpDS3LineFailures  
  Counter32 as lpDS3PathCodeViolations  
  Counter32 as lpDS3PathErroredSec  
  Counter32 as lpDS3PathSevErroredSec  
  Counter32 as lpDS3PathSefAisSec  
  Counter32 as lpDS3PathUnavailSec  
  Counter32 as lpDS3PathFailures  

LpDS3TestRowStatusEntry  
SEQUENCE    
  RowStatus as lpDS3TestRowStatus  
  DisplayString as lpDS3TestComponentName  
  StorageType as lpDS3TestStorageType  
  NonReplicated as lpDS3TestIndex  

LpDS3TestStateEntry  
SEQUENCE    
  INTEGER as lpDS3TestAdminState  
  INTEGER as lpDS3TestOperationalState  
  INTEGER as lpDS3TestUsageState  

LpDS3TestSetupEntry  
SEQUENCE    
  AsciiString as lpDS3TestPurpose  
  INTEGER as lpDS3TestType  
  Unsigned32 as lpDS3TestFrmSize  
  INTEGER as lpDS3TestFrmPatternType  
  Hex as lpDS3TestCustomizedPattern  
  Unsigned32 as lpDS3TestDataStartDelay  
  Unsigned32 as lpDS3TestDisplayInterval  
  Unsigned32 as lpDS3TestDuration  

LpDS3TestResultsEntry  
SEQUENCE    
  Counter32 as lpDS3TestElapsedTime  
  Unsigned32 as lpDS3TestTimeRemaining  
  INTEGER as lpDS3TestCauseOfTermination  
  PassportCounter64 as lpDS3TestBitsTx  
  PassportCounter64 as lpDS3TestBytesTx  
  PassportCounter64 as lpDS3TestFrmTx  
  PassportCounter64 as lpDS3TestBitsRx  
  PassportCounter64 as lpDS3TestBytesRx  
  PassportCounter64 as lpDS3TestFrmRx  
  PassportCounter64 as lpDS3TestErroredFrmRx  
  AsciiString as lpDS3TestBitErrorRate  

LpDS3CBitRowStatusEntry  
SEQUENCE    
  RowStatus as lpDS3CBitRowStatus  
  DisplayString as lpDS3CBitComponentName  
  StorageType as lpDS3CBitStorageType  
  NonReplicated as lpDS3CBitIndex  

LpDS3CBitOperationalEntry  
SEQUENCE    
  INTEGER as lpDS3CBitFarEndAlarm  
  OCTET STRING as lpDS3CBitLoopedbackToFarEnd  
  OCTET STRING as lpDS3CBitLoopbackAtFarEndRequested  

LpDS3CBitStatsEntry  
SEQUENCE    
  Counter32 as lpDS3CBitCbitErrorFreeSec  
  Counter32 as lpDS3CBitCbitCodeViolations  
  Counter32 as lpDS3CBitCbitErroredSec  
  Counter32 as lpDS3CBitCbitSevErroredSec  
  Counter32 as lpDS3CBitCbitUnavailSec  
  Counter32 as lpDS3CBitFarEndErrorFreeSec  
  Counter32 as lpDS3CBitFarEndCodeViolations  
  Counter32 as lpDS3CBitFarEndErroredSec  
  Counter32 as lpDS3CBitFarEndSevErroredSec  
  Counter32 as lpDS3CBitFarEndSefAisSec  
  Counter32 as lpDS3CBitFarEndUnavailSec  
  Counter32 as lpDS3CBitFarEndFailures  

LpDS3PlcpRowStatusEntry  
SEQUENCE    
  RowStatus as lpDS3PlcpRowStatus  
  DisplayString as lpDS3PlcpComponentName  
  StorageType as lpDS3PlcpStorageType  
  NonReplicated as lpDS3PlcpIndex  

LpDS3PlcpOperationalEntry  
SEQUENCE    
  INTEGER as lpDS3PlcpLofAlarm  
  INTEGER as lpDS3PlcpRxRaiAlarm  

LpDS3PlcpStatsEntry  
SEQUENCE    
  Counter32 as lpDS3PlcpErrorFreeSec  
  Counter32 as lpDS3PlcpCodingViolations  
  Counter32 as lpDS3PlcpErroredSec  
  Counter32 as lpDS3PlcpSevErroredSec  
  Counter32 as lpDS3PlcpSevErroredFramingSec  
  Counter32 as lpDS3PlcpUnavailSec  
  Counter32 as lpDS3PlcpFarEndErrorFreeSec  
  Counter32 as lpDS3PlcpFarEndCodingViolations  
  Counter32 as lpDS3PlcpFarEndErroredSec  
  Counter32 as lpDS3PlcpFarEndSevErroredSec  
  Counter32 as lpDS3PlcpFarEndUnavailableSec  

LpDS3CellRowStatusEntry  
SEQUENCE    
  RowStatus as lpDS3CellRowStatus  
  DisplayString as lpDS3CellComponentName  
  StorageType as lpDS3CellStorageType  
  NonReplicated as lpDS3CellIndex  

LpDS3CellProvEntry  
SEQUENCE    
  Unsigned32 as lpDS3CellAlarmActDelay  
  INTEGER as lpDS3CellScrambleCellPayload  
  INTEGER as lpDS3CellCorrectSingleBitHeaderErrors  

LpDS3CellOperEntry  
SEQUENCE    
  INTEGER as lpDS3CellLcdAlarm  

LpDS3CellStatsEntry  
SEQUENCE    
  Counter32 as lpDS3CellUncorrectableHecErrors  
  Counter32 as lpDS3CellSevErroredSec  
  Gauge32 as lpDS3CellReceiveCellUtilization  
  Gauge32 as lpDS3CellTransmitCellUtilization  
  Counter32 as lpDS3CellCorrectableHeaderErrors  

LpDS3DS1RowStatusEntry  
SEQUENCE    
  RowStatus as lpDS3DS1RowStatus  
  DisplayString as lpDS3DS1ComponentName  
  StorageType as lpDS3DS1StorageType  
  Integer32 as lpDS3DS1Index  

LpDS3DS1ProvEntry  
SEQUENCE    
  INTEGER as lpDS3DS1LineType  
  INTEGER as lpDS3DS1ZeroCoding  
  INTEGER as lpDS3DS1ClockingSource  

LpDS3DS1CidDataEntry  
SEQUENCE    
  Unsigned32 as lpDS3DS1CustomerIdentifier  

LpDS3DS1AdminInfoEntry  
SEQUENCE    
  AsciiString as lpDS3DS1Vendor  
  AsciiString as lpDS3DS1CommentText  

LpDS3DS1IfEntryEntry  
SEQUENCE    
  INTEGER as lpDS3DS1IfAdminStatus  
  InterfaceIndex as lpDS3DS1IfIndex  

LpDS3DS1OperStatusEntry  
SEQUENCE    
  INTEGER as lpDS3DS1SnmpOperStatus  

LpDS3DS1StateEntry  
SEQUENCE    
  INTEGER as lpDS3DS1AdminState  
  INTEGER as lpDS3DS1OperationalState  
  INTEGER as lpDS3DS1UsageState  
  OCTET STRING as lpDS3DS1AvailabilityStatus  
  OCTET STRING as lpDS3DS1ProceduralStatus  
  OCTET STRING as lpDS3DS1ControlStatus  
  OCTET STRING as lpDS3DS1AlarmStatus  
  INTEGER as lpDS3DS1StandbyStatus  
  INTEGER as lpDS3DS1UnknownStatus  

LpDS3DS1OperEntry  
SEQUENCE    
  INTEGER as lpDS3DS1RxAisAlarm  
  INTEGER as lpDS3DS1LofAlarm  
  INTEGER as lpDS3DS1RxRaiAlarm  
  INTEGER as lpDS3DS1TxAisAlarm  
  INTEGER as lpDS3DS1TxRaiAlarm  

LpDS3DS1StatsEntry  
SEQUENCE    
  Counter32 as lpDS3DS1RunningTime  
  Counter32 as lpDS3DS1ErrorFreeSec  
  Counter32 as lpDS3DS1ErroredSec  
  Counter32 as lpDS3DS1SevErroredSec  
  Counter32 as lpDS3DS1SevErroredFrmSec  
  Counter32 as lpDS3DS1UnavailSec  
  Counter32 as lpDS3DS1CrcErrors  
  Counter32 as lpDS3DS1FrmErrors  
  Counter32 as lpDS3DS1SlipErrors  

LpDS3DS1ChanRowStatusEntry  
SEQUENCE    
  RowStatus as lpDS3DS1ChanRowStatus  
  DisplayString as lpDS3DS1ChanComponentName  
  StorageType as lpDS3DS1ChanStorageType  
  Integer32 as lpDS3DS1ChanIndex  

LpDS3DS1ChanProvEntry  
SEQUENCE    
  OCTET STRING as lpDS3DS1ChanTimeslots  
  INTEGER as lpDS3DS1ChanTimeslotDataRate  
  Link as lpDS3DS1ChanApplicationFramerName  

LpDS3DS1ChanCidDataEntry  
SEQUENCE    
  Unsigned32 as lpDS3DS1ChanCustomerIdentifier  

LpDS3DS1ChanIfEntryEntry  
SEQUENCE    
  INTEGER as lpDS3DS1ChanIfAdminStatus  
  InterfaceIndex as lpDS3DS1ChanIfIndex  

LpDS3DS1ChanOperStatusEntry  
SEQUENCE    
  INTEGER as lpDS3DS1ChanSnmpOperStatus  

LpDS3DS1ChanStateEntry  
SEQUENCE    
  INTEGER as lpDS3DS1ChanAdminState  
  INTEGER as lpDS3DS1ChanOperationalState  
  INTEGER as lpDS3DS1ChanUsageState  
  OCTET STRING as lpDS3DS1ChanAvailabilityStatus  
  OCTET STRING as lpDS3DS1ChanProceduralStatus  
  OCTET STRING as lpDS3DS1ChanControlStatus  
  OCTET STRING as lpDS3DS1ChanAlarmStatus  
  INTEGER as lpDS3DS1ChanStandbyStatus  
  INTEGER as lpDS3DS1ChanUnknownStatus  

LpDS3DS1ChanOperEntry  
SEQUENCE    
  Gauge32 as lpDS3DS1ChanActualChannelSpeed  

LpDS3DS1ChanAdminInfoEntry  
SEQUENCE    
  AsciiString as lpDS3DS1ChanVendor  
  AsciiString as lpDS3DS1ChanCommentText  

LpDS3DS1ChanTestRowStatusEntry  
SEQUENCE    
  RowStatus as lpDS3DS1ChanTestRowStatus  
  DisplayString as lpDS3DS1ChanTestComponentName  
  StorageType as lpDS3DS1ChanTestStorageType  
  NonReplicated as lpDS3DS1ChanTestIndex  

LpDS3DS1ChanTestStateEntry  
SEQUENCE    
  INTEGER as lpDS3DS1ChanTestAdminState  
  INTEGER as lpDS3DS1ChanTestOperationalState  
  INTEGER as lpDS3DS1ChanTestUsageState  

LpDS3DS1ChanTestSetupEntry  
SEQUENCE    
  AsciiString as lpDS3DS1ChanTestPurpose  
  INTEGER as lpDS3DS1ChanTestType  
  Unsigned32 as lpDS3DS1ChanTestFrmSize  
  INTEGER as lpDS3DS1ChanTestFrmPatternType  
  Hex as lpDS3DS1ChanTestCustomizedPattern  
  Unsigned32 as lpDS3DS1ChanTestDataStartDelay  
  Unsigned32 as lpDS3DS1ChanTestDisplayInterval  
  Unsigned32 as lpDS3DS1ChanTestDuration  

LpDS3DS1ChanTestResultsEntry  
SEQUENCE    
  Counter32 as lpDS3DS1ChanTestElapsedTime  
  Unsigned32 as lpDS3DS1ChanTestTimeRemaining  
  INTEGER as lpDS3DS1ChanTestCauseOfTermination  
  PassportCounter64 as lpDS3DS1ChanTestBitsTx  
  PassportCounter64 as lpDS3DS1ChanTestBytesTx  
  PassportCounter64 as lpDS3DS1ChanTestFrmTx  
  PassportCounter64 as lpDS3DS1ChanTestBitsRx  
  PassportCounter64 as lpDS3DS1ChanTestBytesRx  
  PassportCounter64 as lpDS3DS1ChanTestFrmRx  
  PassportCounter64 as lpDS3DS1ChanTestErroredFrmRx  
  AsciiString as lpDS3DS1ChanTestBitErrorRate  

LpDS3DS1ChanCellRowStatusEntry  
SEQUENCE    
  RowStatus as lpDS3DS1ChanCellRowStatus  
  DisplayString as lpDS3DS1ChanCellComponentName  
  StorageType as lpDS3DS1ChanCellStorageType  
  NonReplicated as lpDS3DS1ChanCellIndex  

LpDS3DS1ChanCellProvEntry  
SEQUENCE    
  Unsigned32 as lpDS3DS1ChanCellAlarmActDelay  
  INTEGER as lpDS3DS1ChanCellScrambleCellPayload  
  INTEGER as lpDS3DS1ChanCellCorrectSingleBitHeaderErrors  

LpDS3DS1ChanCellOperEntry  
SEQUENCE    
  INTEGER as lpDS3DS1ChanCellLcdAlarm  

LpDS3DS1ChanCellStatsEntry  
SEQUENCE    
  Counter32 as lpDS3DS1ChanCellUncorrectableHecErrors  
  Counter32 as lpDS3DS1ChanCellSevErroredSec  
  Gauge32 as lpDS3DS1ChanCellReceiveCellUtilization  
  Gauge32 as lpDS3DS1ChanCellTransmitCellUtilization  
  Counter32 as lpDS3DS1ChanCellCorrectableHeaderErrors  

LpDS3DS1ChanTcRowStatusEntry  
SEQUENCE    
  RowStatus as lpDS3DS1ChanTcRowStatus  
  DisplayString as lpDS3DS1ChanTcComponentName  
  StorageType as lpDS3DS1ChanTcStorageType  
  NonReplicated as lpDS3DS1ChanTcIndex  

LpDS3DS1ChanTcProvEntry  
SEQUENCE    
  Hex as lpDS3DS1ChanTcReplacementData  
  Unsigned32 as lpDS3DS1ChanTcSignalOneDuration  

LpDS3DS1ChanTcOpEntry  
SEQUENCE    
  INTEGER as lpDS3DS1ChanTcIngressConditioning  
  INTEGER as lpDS3DS1ChanTcEgressConditioning  

LpDS3DS1ChanTcSigOneEntry  
SEQUENCE    
  INTEGER as lpDS3DS1ChanTcSigOneIndex  
  Unsigned32 as lpDS3DS1ChanTcSigOneValue  

LpDS3DS1ChanTcSigTwoEntry  
SEQUENCE    
  INTEGER as lpDS3DS1ChanTcSigTwoIndex  
  Unsigned32 as lpDS3DS1ChanTcSigTwoValue  

LpDS3DS1TestRowStatusEntry  
SEQUENCE    
  RowStatus as lpDS3DS1TestRowStatus  
  DisplayString as lpDS3DS1TestComponentName  
  StorageType as lpDS3DS1TestStorageType  
  NonReplicated as lpDS3DS1TestIndex  

LpDS3DS1TestStateEntry  
SEQUENCE    
  INTEGER as lpDS3DS1TestAdminState  
  INTEGER as lpDS3DS1TestOperationalState  
  INTEGER as lpDS3DS1TestUsageState  

LpDS3DS1TestSetupEntry  
SEQUENCE    
  AsciiString as lpDS3DS1TestPurpose  
  INTEGER as lpDS3DS1TestType  
  Unsigned32 as lpDS3DS1TestFrmSize  
  INTEGER as lpDS3DS1TestFrmPatternType  
  Hex as lpDS3DS1TestCustomizedPattern  
  Unsigned32 as lpDS3DS1TestDataStartDelay  
  Unsigned32 as lpDS3DS1TestDisplayInterval  
  Unsigned32 as lpDS3DS1TestDuration  

LpDS3DS1TestResultsEntry  
SEQUENCE    
  Counter32 as lpDS3DS1TestElapsedTime  
  Unsigned32 as lpDS3DS1TestTimeRemaining  
  INTEGER as lpDS3DS1TestCauseOfTermination  
  PassportCounter64 as lpDS3DS1TestBitsTx  
  PassportCounter64 as lpDS3DS1TestBytesTx  
  PassportCounter64 as lpDS3DS1TestFrmTx  
  PassportCounter64 as lpDS3DS1TestBitsRx  
  PassportCounter64 as lpDS3DS1TestBytesRx  
  PassportCounter64 as lpDS3DS1TestFrmRx  
  PassportCounter64 as lpDS3DS1TestErroredFrmRx  
  AsciiString as lpDS3DS1TestBitErrorRate  

LpE3RowStatusEntry  
SEQUENCE    
  RowStatus as lpE3RowStatus  
  DisplayString as lpE3ComponentName  
  StorageType as lpE3StorageType  
  Integer32 as lpE3Index  

LpE3ProvEntry  
SEQUENCE    
  Unsigned32 as lpE3LineLength  
  INTEGER as lpE3ClockingSource  
  Link as lpE3ApplicationFramerName  
  INTEGER as lpE3Mapping  
  INTEGER as lpE3Framing  
  Unsigned32 as lpE3LinkAlarmActivationThreshold  
  Unsigned32 as lpE3LinkAlarmScanInterval  

LpE3CidDataEntry  
SEQUENCE    
  Unsigned32 as lpE3CustomerIdentifier  

LpE3AdminInfoEntry  
SEQUENCE    
  AsciiString as lpE3Vendor  
  AsciiString as lpE3CommentText  

LpE3IfEntryEntry  
SEQUENCE    
  INTEGER as lpE3IfAdminStatus  
  InterfaceIndex as lpE3IfIndex  

LpE3OperStatusEntry  
SEQUENCE    
  INTEGER as lpE3SnmpOperStatus  

LpE3StateEntry  
SEQUENCE    
  INTEGER as lpE3AdminState  
  INTEGER as lpE3OperationalState  
  INTEGER as lpE3UsageState  
  OCTET STRING as lpE3AvailabilityStatus  
  OCTET STRING as lpE3ProceduralStatus  
  OCTET STRING as lpE3ControlStatus  
  OCTET STRING as lpE3AlarmStatus  
  INTEGER as lpE3StandbyStatus  
  INTEGER as lpE3UnknownStatus  

LpE3OperEntry  
SEQUENCE    
  INTEGER as lpE3LosAlarm  
  INTEGER as lpE3LofAlarm  
  INTEGER as lpE3RxAisAlarm  
  INTEGER as lpE3RxRaiAlarm  
  INTEGER as lpE3TxAis  
  INTEGER as lpE3TxRai  

LpE3StatsEntry  
SEQUENCE    
  Counter32 as lpE3RunningTime  
  Counter32 as lpE3ErrorFreeSec  
  Counter32 as lpE3LineCodeViolations  
  Counter32 as lpE3LineErroredSec  
  Counter32 as lpE3LineSevErroredSec  
  Counter32 as lpE3LineLosSec  
  Counter32 as lpE3LineFailures  
  Counter32 as lpE3PathCodeViolations  
  Counter32 as lpE3PathErroredSec  
  Counter32 as lpE3PathSevErroredSec  
  Counter32 as lpE3PathSefAisSec  
  Counter32 as lpE3PathUnavailSec  
  Counter32 as lpE3PathFailures  

LpE3TestRowStatusEntry  
SEQUENCE    
  RowStatus as lpE3TestRowStatus  
  DisplayString as lpE3TestComponentName  
  StorageType as lpE3TestStorageType  
  NonReplicated as lpE3TestIndex  

LpE3TestStateEntry  
SEQUENCE    
  INTEGER as lpE3TestAdminState  
  INTEGER as lpE3TestOperationalState  
  INTEGER as lpE3TestUsageState  

LpE3TestSetupEntry  
SEQUENCE    
  AsciiString as lpE3TestPurpose  
  INTEGER as lpE3TestType  
  Unsigned32 as lpE3TestFrmSize  
  INTEGER as lpE3TestFrmPatternType  
  Hex as lpE3TestCustomizedPattern  
  Unsigned32 as lpE3TestDataStartDelay  
  Unsigned32 as lpE3TestDisplayInterval  
  Unsigned32 as lpE3TestDuration  

LpE3TestResultsEntry  
SEQUENCE    
  Counter32 as lpE3TestElapsedTime  
  Unsigned32 as lpE3TestTimeRemaining  
  INTEGER as lpE3TestCauseOfTermination  
  PassportCounter64 as lpE3TestBitsTx  
  PassportCounter64 as lpE3TestBytesTx  
  PassportCounter64 as lpE3TestFrmTx  
  PassportCounter64 as lpE3TestBitsRx  
  PassportCounter64 as lpE3TestBytesRx  
  PassportCounter64 as lpE3TestFrmRx  
  PassportCounter64 as lpE3TestErroredFrmRx  
  AsciiString as lpE3TestBitErrorRate  

LpE3G832RowStatusEntry  
SEQUENCE    
  RowStatus as lpE3G832RowStatus  
  DisplayString as lpE3G832ComponentName  
  StorageType as lpE3G832StorageType  
  NonReplicated as lpE3G832Index  

LpE3G832ProvisionedEntry  
SEQUENCE    
  AsciiString as lpE3G832TrailTraceTransmitted  
  AsciiString as lpE3G832TrailTraceExpected  

LpE3G832OperationalEntry  
SEQUENCE    
  INTEGER as lpE3G832UnexpectedPayloadType  
  INTEGER as lpE3G832TrailTraceMismatch  
  INTEGER as lpE3G832TimingMarker  
  AsciiString as lpE3G832TrailTraceReceived  

LpE3G832StatsEntry  
SEQUENCE    
  Counter32 as lpE3G832FarEndErrorFreeSec  
  Counter32 as lpE3G832FarEndCodeViolations  
  Counter32 as lpE3G832FarEndErroredSec  
  Counter32 as lpE3G832FarEndSevErroredSec  
  Counter32 as lpE3G832FarEndSefAisSec  
  Counter32 as lpE3G832FarEndUnavailSec  

LpE3PlcpRowStatusEntry  
SEQUENCE    
  RowStatus as lpE3PlcpRowStatus  
  DisplayString as lpE3PlcpComponentName  
  StorageType as lpE3PlcpStorageType  
  NonReplicated as lpE3PlcpIndex  

LpE3PlcpOperationalEntry  
SEQUENCE    
  INTEGER as lpE3PlcpLofAlarm  
  INTEGER as lpE3PlcpRxRaiAlarm  

LpE3PlcpStatsEntry  
SEQUENCE    
  Counter32 as lpE3PlcpErrorFreeSec  
  Counter32 as lpE3PlcpCodingViolations  
  Counter32 as lpE3PlcpErroredSec  
  Counter32 as lpE3PlcpSevErroredSec  
  Counter32 as lpE3PlcpSevErroredFramingSec  
  Counter32 as lpE3PlcpUnavailSec  
  Counter32 as lpE3PlcpFarEndErrorFreeSec  
  Counter32 as lpE3PlcpFarEndCodingViolations  
  Counter32 as lpE3PlcpFarEndErroredSec  
  Counter32 as lpE3PlcpFarEndSevErroredSec  
  Counter32 as lpE3PlcpFarEndUnavailableSec  

LpE3CellRowStatusEntry  
SEQUENCE    
  RowStatus as lpE3CellRowStatus  
  DisplayString as lpE3CellComponentName  
  StorageType as lpE3CellStorageType  
  NonReplicated as lpE3CellIndex  

LpE3CellProvEntry  
SEQUENCE    
  Unsigned32 as lpE3CellAlarmActDelay  
  INTEGER as lpE3CellScrambleCellPayload  
  INTEGER as lpE3CellCorrectSingleBitHeaderErrors  

LpE3CellOperEntry  
SEQUENCE    
  INTEGER as lpE3CellLcdAlarm  

LpE3CellStatsEntry  
SEQUENCE    
  Counter32 as lpE3CellUncorrectableHecErrors  
  Counter32 as lpE3CellSevErroredSec  
  Gauge32 as lpE3CellReceiveCellUtilization  
  Gauge32 as lpE3CellTransmitCellUtilization  
  Counter32 as lpE3CellCorrectableHeaderErrors  

LpDS1RowStatusEntry  
SEQUENCE    
  RowStatus as lpDS1RowStatus  
  DisplayString as lpDS1ComponentName  
  StorageType as lpDS1StorageType  
  Integer32 as lpDS1Index  

LpDS1ProvEntry  
SEQUENCE    
  INTEGER as lpDS1LineType  
  INTEGER as lpDS1ZeroCoding  
  INTEGER as lpDS1ClockingSource  
  INTEGER as lpDS1RaiAlarmType  
  Unsigned32 as lpDS1LineLength  

LpDS1CidDataEntry  
SEQUENCE    
  Unsigned32 as lpDS1CustomerIdentifier  

LpDS1AdminInfoEntry  
SEQUENCE    
  AsciiString as lpDS1Vendor  
  AsciiString as lpDS1CommentText  

LpDS1IfEntryEntry  
SEQUENCE    
  INTEGER as lpDS1IfAdminStatus  
  InterfaceIndex as lpDS1IfIndex  

LpDS1OperStatusEntry  
SEQUENCE    
  INTEGER as lpDS1SnmpOperStatus  

LpDS1StateEntry  
SEQUENCE    
  INTEGER as lpDS1AdminState  
  INTEGER as lpDS1OperationalState  
  INTEGER as lpDS1UsageState  
  OCTET STRING as lpDS1AvailabilityStatus  
  OCTET STRING as lpDS1ProceduralStatus  
  OCTET STRING as lpDS1ControlStatus  
  OCTET STRING as lpDS1AlarmStatus  
  INTEGER as lpDS1StandbyStatus  
  INTEGER as lpDS1UnknownStatus  

LpDS1OperEntry  
SEQUENCE    
  INTEGER as lpDS1LosAlarm  
  INTEGER as lpDS1RxAisAlarm  
  INTEGER as lpDS1LofAlarm  
  INTEGER as lpDS1RxRaiAlarm  
  INTEGER as lpDS1TxAisAlarm  
  INTEGER as lpDS1TxRaiAlarm  

LpDS1StatsEntry  
SEQUENCE    
  Counter32 as lpDS1RunningTime  
  Counter32 as lpDS1ErrorFreeSec  
  Counter32 as lpDS1ErroredSec  
  Counter32 as lpDS1SevErroredSec  
  Counter32 as lpDS1SevErroredFrmSec  
  Counter32 as lpDS1UnavailSec  
  Counter32 as lpDS1BpvErrors  
  Counter32 as lpDS1CrcErrors  
  Counter32 as lpDS1FrmErrors  
  Counter32 as lpDS1LosStateChanges  
  Counter32 as lpDS1SlipErrors  

LpDS1ChanRowStatusEntry  
SEQUENCE    
  RowStatus as lpDS1ChanRowStatus  
  DisplayString as lpDS1ChanComponentName  
  StorageType as lpDS1ChanStorageType  
  Integer32 as lpDS1ChanIndex  

LpDS1ChanProvEntry  
SEQUENCE    
  OCTET STRING as lpDS1ChanTimeslots  
  INTEGER as lpDS1ChanTimeslotDataRate  
  Link as lpDS1ChanApplicationFramerName  

LpDS1ChanCidDataEntry  
SEQUENCE    
  Unsigned32 as lpDS1ChanCustomerIdentifier  

LpDS1ChanIfEntryEntry  
SEQUENCE    
  INTEGER as lpDS1ChanIfAdminStatus  
  InterfaceIndex as lpDS1ChanIfIndex  

LpDS1ChanOperStatusEntry  
SEQUENCE    
  INTEGER as lpDS1ChanSnmpOperStatus  

LpDS1ChanStateEntry  
SEQUENCE    
  INTEGER as lpDS1ChanAdminState  
  INTEGER as lpDS1ChanOperationalState  
  INTEGER as lpDS1ChanUsageState  
  OCTET STRING as lpDS1ChanAvailabilityStatus  
  OCTET STRING as lpDS1ChanProceduralStatus  
  OCTET STRING as lpDS1ChanControlStatus  
  OCTET STRING as lpDS1ChanAlarmStatus  
  INTEGER as lpDS1ChanStandbyStatus  
  INTEGER as lpDS1ChanUnknownStatus  

LpDS1ChanOperEntry  
SEQUENCE    
  Gauge32 as lpDS1ChanActualChannelSpeed  

LpDS1ChanAdminInfoEntry  
SEQUENCE    
  AsciiString as lpDS1ChanVendor  
  AsciiString as lpDS1ChanCommentText  

LpDS1ChanTestRowStatusEntry  
SEQUENCE    
  RowStatus as lpDS1ChanTestRowStatus  
  DisplayString as lpDS1ChanTestComponentName  
  StorageType as lpDS1ChanTestStorageType  
  NonReplicated as lpDS1ChanTestIndex  

LpDS1ChanTestStateEntry  
SEQUENCE    
  INTEGER as lpDS1ChanTestAdminState  
  INTEGER as lpDS1ChanTestOperationalState  
  INTEGER as lpDS1ChanTestUsageState  

LpDS1ChanTestSetupEntry  
SEQUENCE    
  AsciiString as lpDS1ChanTestPurpose  
  INTEGER as lpDS1ChanTestType  
  Unsigned32 as lpDS1ChanTestFrmSize  
  INTEGER as lpDS1ChanTestFrmPatternType  
  Hex as lpDS1ChanTestCustomizedPattern  
  Unsigned32 as lpDS1ChanTestDataStartDelay  
  Unsigned32 as lpDS1ChanTestDisplayInterval  
  Unsigned32 as lpDS1ChanTestDuration  

LpDS1ChanTestResultsEntry  
SEQUENCE    
  Counter32 as lpDS1ChanTestElapsedTime  
  Unsigned32 as lpDS1ChanTestTimeRemaining  
  INTEGER as lpDS1ChanTestCauseOfTermination  
  PassportCounter64 as lpDS1ChanTestBitsTx  
  PassportCounter64 as lpDS1ChanTestBytesTx  
  PassportCounter64 as lpDS1ChanTestFrmTx  
  PassportCounter64 as lpDS1ChanTestBitsRx  
  PassportCounter64 as lpDS1ChanTestBytesRx  
  PassportCounter64 as lpDS1ChanTestFrmRx  
  PassportCounter64 as lpDS1ChanTestErroredFrmRx  
  AsciiString as lpDS1ChanTestBitErrorRate  

LpDS1ChanCellRowStatusEntry  
SEQUENCE    
  RowStatus as lpDS1ChanCellRowStatus  
  DisplayString as lpDS1ChanCellComponentName  
  StorageType as lpDS1ChanCellStorageType  
  NonReplicated as lpDS1ChanCellIndex  

LpDS1ChanCellProvEntry  
SEQUENCE    
  Unsigned32 as lpDS1ChanCellAlarmActDelay  
  INTEGER as lpDS1ChanCellScrambleCellPayload  
  INTEGER as lpDS1ChanCellCorrectSingleBitHeaderErrors  

LpDS1ChanCellOperEntry  
SEQUENCE    
  INTEGER as lpDS1ChanCellLcdAlarm  

LpDS1ChanCellStatsEntry  
SEQUENCE    
  Counter32 as lpDS1ChanCellUncorrectableHecErrors  
  Counter32 as lpDS1ChanCellSevErroredSec  
  Gauge32 as lpDS1ChanCellReceiveCellUtilization  
  Gauge32 as lpDS1ChanCellTransmitCellUtilization  
  Counter32 as lpDS1ChanCellCorrectableHeaderErrors  

LpDS1ChanTcRowStatusEntry  
SEQUENCE    
  RowStatus as lpDS1ChanTcRowStatus  
  DisplayString as lpDS1ChanTcComponentName  
  StorageType as lpDS1ChanTcStorageType  
  NonReplicated as lpDS1ChanTcIndex  

LpDS1ChanTcProvEntry  
SEQUENCE    
  Hex as lpDS1ChanTcReplacementData  
  Unsigned32 as lpDS1ChanTcSignalOneDuration  

LpDS1ChanTcOpEntry  
SEQUENCE    
  INTEGER as lpDS1ChanTcIngressConditioning  
  INTEGER as lpDS1ChanTcEgressConditioning  

LpDS1ChanTcSigOneEntry  
SEQUENCE    
  INTEGER as lpDS1ChanTcSigOneIndex  
  Unsigned32 as lpDS1ChanTcSigOneValue  

LpDS1ChanTcSigTwoEntry  
SEQUENCE    
  INTEGER as lpDS1ChanTcSigTwoIndex  
  Unsigned32 as lpDS1ChanTcSigTwoValue  

LpDS1TestRowStatusEntry  
SEQUENCE    
  RowStatus as lpDS1TestRowStatus  
  DisplayString as lpDS1TestComponentName  
  StorageType as lpDS1TestStorageType  
  NonReplicated as lpDS1TestIndex  

LpDS1TestStateEntry  
SEQUENCE    
  INTEGER as lpDS1TestAdminState  
  INTEGER as lpDS1TestOperationalState  
  INTEGER as lpDS1TestUsageState  

LpDS1TestSetupEntry  
SEQUENCE    
  AsciiString as lpDS1TestPurpose  
  INTEGER as lpDS1TestType  
  Unsigned32 as lpDS1TestFrmSize  
  INTEGER as lpDS1TestFrmPatternType  
  Hex as lpDS1TestCustomizedPattern  
  Unsigned32 as lpDS1TestDataStartDelay  
  Unsigned32 as lpDS1TestDisplayInterval  
  Unsigned32 as lpDS1TestDuration  

LpDS1TestResultsEntry  
SEQUENCE    
  Counter32 as lpDS1TestElapsedTime  
  Unsigned32 as lpDS1TestTimeRemaining  
  INTEGER as lpDS1TestCauseOfTermination  
  PassportCounter64 as lpDS1TestBitsTx  
  PassportCounter64 as lpDS1TestBytesTx  
  PassportCounter64 as lpDS1TestFrmTx  
  PassportCounter64 as lpDS1TestBitsRx  
  PassportCounter64 as lpDS1TestBytesRx  
  PassportCounter64 as lpDS1TestFrmRx  
  PassportCounter64 as lpDS1TestErroredFrmRx  
  AsciiString as lpDS1TestBitErrorRate  

LpDS1DspRowStatusEntry  
SEQUENCE    
  RowStatus as lpDS1DspRowStatus  
  DisplayString as lpDS1DspComponentName  
  StorageType as lpDS1DspStorageType  
  NonReplicated as lpDS1DspIndex  

LpDS1AudioRowStatusEntry  
SEQUENCE    
  RowStatus as lpDS1AudioRowStatus  
  DisplayString as lpDS1AudioComponentName  
  StorageType as lpDS1AudioStorageType  
  NonReplicated as lpDS1AudioIndex  

LpE1RowStatusEntry  
SEQUENCE    
  RowStatus as lpE1RowStatus  
  DisplayString as lpE1ComponentName  
  StorageType as lpE1StorageType  
  Integer32 as lpE1Index  

LpE1ProvEntry  
SEQUENCE    
  INTEGER as lpE1LineType  
  INTEGER as lpE1ClockingSource  
  INTEGER as lpE1Crc4Mode  
  INTEGER as lpE1SendRaiOnAis  
  Unsigned32 as lpE1RaiDeclareAlarmTime  
  Unsigned32 as lpE1RaiClearAlarmTime  

LpE1CidDataEntry  
SEQUENCE    
  Unsigned32 as lpE1CustomerIdentifier  

LpE1AdminInfoEntry  
SEQUENCE    
  AsciiString as lpE1Vendor  
  AsciiString as lpE1CommentText  

LpE1IfEntryEntry  
SEQUENCE    
  INTEGER as lpE1IfAdminStatus  
  InterfaceIndex as lpE1IfIndex  

LpE1OperStatusEntry  
SEQUENCE    
  INTEGER as lpE1SnmpOperStatus  

LpE1StateEntry  
SEQUENCE    
  INTEGER as lpE1AdminState  
  INTEGER as lpE1OperationalState  
  INTEGER as lpE1UsageState  
  OCTET STRING as lpE1AvailabilityStatus  
  OCTET STRING as lpE1ProceduralStatus  
  OCTET STRING as lpE1ControlStatus  
  OCTET STRING as lpE1AlarmStatus  
  INTEGER as lpE1StandbyStatus  
  INTEGER as lpE1UnknownStatus  

LpE1OperEntry  
SEQUENCE    
  INTEGER as lpE1LosAlarm  
  INTEGER as lpE1RxAisAlarm  
  INTEGER as lpE1LofAlarm  
  INTEGER as lpE1RxRaiAlarm  
  INTEGER as lpE1TxAisAlarm  
  INTEGER as lpE1TxRaiAlarm  

LpE1E1OperEntry  
SEQUENCE    
  INTEGER as lpE1MultifrmLofAlarm  
  INTEGER as lpE1RxMultifrmRaiAlarm  
  INTEGER as lpE1TxMultifrmRaiAlarm  

LpE1StatsEntry  
SEQUENCE    
  Counter32 as lpE1RunningTime  
  Counter32 as lpE1ErrorFreeSec  
  Counter32 as lpE1ErroredSec  
  Counter32 as lpE1SevErroredSec  
  Counter32 as lpE1SevErroredFrmSec  
  Counter32 as lpE1UnavailSec  
  Counter32 as lpE1BpvErrors  
  Counter32 as lpE1CrcErrors  
  Counter32 as lpE1FrmErrors  
  Counter32 as lpE1LosStateChanges  
  Counter32 as lpE1SlipErrors  

LpE1ChanRowStatusEntry  
SEQUENCE    
  RowStatus as lpE1ChanRowStatus  
  DisplayString as lpE1ChanComponentName  
  StorageType as lpE1ChanStorageType  
  Integer32 as lpE1ChanIndex  

LpE1ChanProvEntry  
SEQUENCE    
  OCTET STRING as lpE1ChanTimeslots  
  INTEGER as lpE1ChanTimeslotDataRate  
  Link as lpE1ChanApplicationFramerName  

LpE1ChanCidDataEntry  
SEQUENCE    
  Unsigned32 as lpE1ChanCustomerIdentifier  

LpE1ChanIfEntryEntry  
SEQUENCE    
  INTEGER as lpE1ChanIfAdminStatus  
  InterfaceIndex as lpE1ChanIfIndex  

LpE1ChanOperStatusEntry  
SEQUENCE    
  INTEGER as lpE1ChanSnmpOperStatus  

LpE1ChanStateEntry  
SEQUENCE    
  INTEGER as lpE1ChanAdminState  
  INTEGER as lpE1ChanOperationalState  
  INTEGER as lpE1ChanUsageState  
  OCTET STRING as lpE1ChanAvailabilityStatus  
  OCTET STRING as lpE1ChanProceduralStatus  
  OCTET STRING as lpE1ChanControlStatus  
  OCTET STRING as lpE1ChanAlarmStatus  
  INTEGER as lpE1ChanStandbyStatus  
  INTEGER as lpE1ChanUnknownStatus  

LpE1ChanOperEntry  
SEQUENCE    
  Gauge32 as lpE1ChanActualChannelSpeed  

LpE1ChanAdminInfoEntry  
SEQUENCE    
  AsciiString as lpE1ChanVendor  
  AsciiString as lpE1ChanCommentText  

LpE1ChanTestRowStatusEntry  
SEQUENCE    
  RowStatus as lpE1ChanTestRowStatus  
  DisplayString as lpE1ChanTestComponentName  
  StorageType as lpE1ChanTestStorageType  
  NonReplicated as lpE1ChanTestIndex  

LpE1ChanTestStateEntry  
SEQUENCE    
  INTEGER as lpE1ChanTestAdminState  
  INTEGER as lpE1ChanTestOperationalState  
  INTEGER as lpE1ChanTestUsageState  

LpE1ChanTestSetupEntry  
SEQUENCE    
  AsciiString as lpE1ChanTestPurpose  
  INTEGER as lpE1ChanTestType  
  Unsigned32 as lpE1ChanTestFrmSize  
  INTEGER as lpE1ChanTestFrmPatternType  
  Hex as lpE1ChanTestCustomizedPattern  
  Unsigned32 as lpE1ChanTestDataStartDelay  
  Unsigned32 as lpE1ChanTestDisplayInterval  
  Unsigned32 as lpE1ChanTestDuration  

LpE1ChanTestResultsEntry  
SEQUENCE    
  Counter32 as lpE1ChanTestElapsedTime  
  Unsigned32 as lpE1ChanTestTimeRemaining  
  INTEGER as lpE1ChanTestCauseOfTermination  
  PassportCounter64 as lpE1ChanTestBitsTx  
  PassportCounter64 as lpE1ChanTestBytesTx  
  PassportCounter64 as lpE1ChanTestFrmTx  
  PassportCounter64 as lpE1ChanTestBitsRx  
  PassportCounter64 as lpE1ChanTestBytesRx  
  PassportCounter64 as lpE1ChanTestFrmRx  
  PassportCounter64 as lpE1ChanTestErroredFrmRx  
  AsciiString as lpE1ChanTestBitErrorRate  

LpE1ChanCellRowStatusEntry  
SEQUENCE    
  RowStatus as lpE1ChanCellRowStatus  
  DisplayString as lpE1ChanCellComponentName  
  StorageType as lpE1ChanCellStorageType  
  NonReplicated as lpE1ChanCellIndex  

LpE1ChanCellProvEntry  
SEQUENCE    
  Unsigned32 as lpE1ChanCellAlarmActDelay  
  INTEGER as lpE1ChanCellScrambleCellPayload  
  INTEGER as lpE1ChanCellCorrectSingleBitHeaderErrors  

LpE1ChanCellOperEntry  
SEQUENCE    
  INTEGER as lpE1ChanCellLcdAlarm  

LpE1ChanCellStatsEntry  
SEQUENCE    
  Counter32 as lpE1ChanCellUncorrectableHecErrors  
  Counter32 as lpE1ChanCellSevErroredSec  
  Gauge32 as lpE1ChanCellReceiveCellUtilization  
  Gauge32 as lpE1ChanCellTransmitCellUtilization  
  Counter32 as lpE1ChanCellCorrectableHeaderErrors  

LpE1ChanTcRowStatusEntry  
SEQUENCE    
  RowStatus as lpE1ChanTcRowStatus  
  DisplayString as lpE1ChanTcComponentName  
  StorageType as lpE1ChanTcStorageType  
  NonReplicated as lpE1ChanTcIndex  

LpE1ChanTcProvEntry  
SEQUENCE    
  Hex as lpE1ChanTcReplacementData  
  Unsigned32 as lpE1ChanTcSignalOneDuration  

LpE1ChanTcOpEntry  
SEQUENCE    
  INTEGER as lpE1ChanTcIngressConditioning  
  INTEGER as lpE1ChanTcEgressConditioning  

LpE1ChanTcSigOneEntry  
SEQUENCE    
  INTEGER as lpE1ChanTcSigOneIndex  
  Unsigned32 as lpE1ChanTcSigOneValue  

LpE1ChanTcSigTwoEntry  
SEQUENCE    
  INTEGER as lpE1ChanTcSigTwoIndex  
  Unsigned32 as lpE1ChanTcSigTwoValue  

LpE1TestRowStatusEntry  
SEQUENCE    
  RowStatus as lpE1TestRowStatus  
  DisplayString as lpE1TestComponentName  
  StorageType as lpE1TestStorageType  
  NonReplicated as lpE1TestIndex  

LpE1TestStateEntry  
SEQUENCE    
  INTEGER as lpE1TestAdminState  
  INTEGER as lpE1TestOperationalState  
  INTEGER as lpE1TestUsageState  

LpE1TestSetupEntry  
SEQUENCE    
  AsciiString as lpE1TestPurpose  
  INTEGER as lpE1TestType  
  Unsigned32 as lpE1TestFrmSize  
  INTEGER as lpE1TestFrmPatternType  
  Hex as lpE1TestCustomizedPattern  
  Unsigned32 as lpE1TestDataStartDelay  
  Unsigned32 as lpE1TestDisplayInterval  
  Unsigned32 as lpE1TestDuration  

LpE1TestResultsEntry  
SEQUENCE    
  Counter32 as lpE1TestElapsedTime  
  Unsigned32 as lpE1TestTimeRemaining  
  INTEGER as lpE1TestCauseOfTermination  
  PassportCounter64 as lpE1TestBitsTx  
  PassportCounter64 as lpE1TestBytesTx  
  PassportCounter64 as lpE1TestFrmTx  
  PassportCounter64 as lpE1TestBitsRx  
  PassportCounter64 as lpE1TestBytesRx  
  PassportCounter64 as lpE1TestFrmRx  
  PassportCounter64 as lpE1TestErroredFrmRx  
  AsciiString as lpE1TestBitErrorRate  

LpE1DspRowStatusEntry  
SEQUENCE    
  RowStatus as lpE1DspRowStatus  
  DisplayString as lpE1DspComponentName  
  StorageType as lpE1DspStorageType  
  NonReplicated as lpE1DspIndex  

LpE1AudioRowStatusEntry  
SEQUENCE    
  RowStatus as lpE1AudioRowStatus  
  DisplayString as lpE1AudioComponentName  
  StorageType as lpE1AudioStorageType  
  NonReplicated as lpE1AudioIndex  

LpV35RowStatusEntry  
SEQUENCE    
  RowStatus as lpV35RowStatus  
  DisplayString as lpV35ComponentName  
  StorageType as lpV35StorageType  
  Integer32 as lpV35Index  

LpV35ProvEntry  
SEQUENCE    
  INTEGER as lpV35LinkMode  
  OCTET STRING as lpV35ReadyLineState  
  OCTET STRING as lpV35DataTransferLineState  
  Unsigned32 as lpV35LineStatusTimeOut  
  Unsigned32 as lpV35LineSpeed  
  INTEGER as lpV35ClockingSource  
  INTEGER as lpV35DteDataClockSource  
  Link as lpV35ApplicationFramerName  
  INTEGER as lpV35EnableDynamicSpeed  

LpV35CidDataEntry  
SEQUENCE    
  Unsigned32 as lpV35CustomerIdentifier  

LpV35AdminInfoEntry  
SEQUENCE    
  AsciiString as lpV35Vendor  
  AsciiString as lpV35CommentText  

LpV35IfEntryEntry  
SEQUENCE    
  INTEGER as lpV35IfAdminStatus  
  InterfaceIndex as lpV35IfIndex  

LpV35OperStatusEntry  
SEQUENCE    
  INTEGER as lpV35SnmpOperStatus  

LpV35StateEntry  
SEQUENCE    
  INTEGER as lpV35AdminState  
  INTEGER as lpV35OperationalState  
  INTEGER as lpV35UsageState  
  OCTET STRING as lpV35AvailabilityStatus  
  OCTET STRING as lpV35ProceduralStatus  
  OCTET STRING as lpV35ControlStatus  
  OCTET STRING as lpV35AlarmStatus  
  INTEGER as lpV35StandbyStatus  
  INTEGER as lpV35UnknownStatus  

LpV35OperEntry  
SEQUENCE    
  INTEGER as lpV35ActualLinkMode  
  OCTET STRING as lpV35LineState  
  Gauge32 as lpV35ActualTxLineSpeed  
  Gauge32 as lpV35ActualRxLineSpeed  
  Counter32 as lpV35DataXferStateChanges  

LpV35TestRowStatusEntry  
SEQUENCE    
  RowStatus as lpV35TestRowStatus  
  DisplayString as lpV35TestComponentName  
  StorageType as lpV35TestStorageType  
  NonReplicated as lpV35TestIndex  

LpV35TestStateEntry  
SEQUENCE    
  INTEGER as lpV35TestAdminState  
  INTEGER as lpV35TestOperationalState  
  INTEGER as lpV35TestUsageState  

LpV35TestSetupEntry  
SEQUENCE    
  AsciiString as lpV35TestPurpose  
  INTEGER as lpV35TestType  
  Unsigned32 as lpV35TestFrmSize  
  INTEGER as lpV35TestFrmPatternType  
  Hex as lpV35TestCustomizedPattern  
  Unsigned32 as lpV35TestDataStartDelay  
  Unsigned32 as lpV35TestDisplayInterval  
  Unsigned32 as lpV35TestDuration  

LpV35TestResultsEntry  
SEQUENCE    
  Counter32 as lpV35TestElapsedTime  
  Unsigned32 as lpV35TestTimeRemaining  
  INTEGER as lpV35TestCauseOfTermination  
  PassportCounter64 as lpV35TestBitsTx  
  PassportCounter64 as lpV35TestBytesTx  
  PassportCounter64 as lpV35TestFrmTx  
  PassportCounter64 as lpV35TestBitsRx  
  PassportCounter64 as lpV35TestBytesRx  
  PassportCounter64 as lpV35TestFrmRx  
  PassportCounter64 as lpV35TestErroredFrmRx  
  AsciiString as lpV35TestBitErrorRate  

LpX21RowStatusEntry  
SEQUENCE    
  RowStatus as lpX21RowStatus  
  DisplayString as lpX21ComponentName  
  StorageType as lpX21StorageType  
  Integer32 as lpX21Index  

LpX21ProvEntry  
SEQUENCE    
  INTEGER as lpX21LinkMode  
  OCTET STRING as lpX21ReadyLineState  
  OCTET STRING as lpX21DataTransferLineState  
  Unsigned32 as lpX21LineStatusTimeOut  
  Unsigned32 as lpX21LineSpeed  
  INTEGER as lpX21ClockingSource  
  INTEGER as lpX21DteDataClockSource  
  INTEGER as lpX21LineTerminationRequired  
  Link as lpX21ApplicationFramerName  
  INTEGER as lpX21EnableDynamicSpeed  

LpX21CidDataEntry  
SEQUENCE    
  Unsigned32 as lpX21CustomerIdentifier  

LpX21AdminInfoEntry  
SEQUENCE    
  AsciiString as lpX21Vendor  
  AsciiString as lpX21CommentText  

LpX21IfEntryEntry  
SEQUENCE    
  INTEGER as lpX21IfAdminStatus  
  InterfaceIndex as lpX21IfIndex  

LpX21OperStatusEntry  
SEQUENCE    
  INTEGER as lpX21SnmpOperStatus  

LpX21StateEntry  
SEQUENCE    
  INTEGER as lpX21AdminState  
  INTEGER as lpX21OperationalState  
  INTEGER as lpX21UsageState  
  OCTET STRING as lpX21AvailabilityStatus  
  OCTET STRING as lpX21ProceduralStatus  
  OCTET STRING as lpX21ControlStatus  
  OCTET STRING as lpX21AlarmStatus  
  INTEGER as lpX21StandbyStatus  
  INTEGER as lpX21UnknownStatus  

LpX21OperEntry  
SEQUENCE    
  INTEGER as lpX21ActualLinkMode  
  OCTET STRING as lpX21LineState  
  Gauge32 as lpX21ActualTxLineSpeed  
  Gauge32 as lpX21ActualRxLineSpeed  
  Counter32 as lpX21DataXferStateChanges  

LpX21TestRowStatusEntry  
SEQUENCE    
  RowStatus as lpX21TestRowStatus  
  DisplayString as lpX21TestComponentName  
  StorageType as lpX21TestStorageType  
  NonReplicated as lpX21TestIndex  

LpX21TestStateEntry  
SEQUENCE    
  INTEGER as lpX21TestAdminState  
  INTEGER as lpX21TestOperationalState  
  INTEGER as lpX21TestUsageState  

LpX21TestSetupEntry  
SEQUENCE    
  AsciiString as lpX21TestPurpose  
  INTEGER as lpX21TestType  
  Unsigned32 as lpX21TestFrmSize  
  INTEGER as lpX21TestFrmPatternType  
  Hex as lpX21TestCustomizedPattern  
  Unsigned32 as lpX21TestDataStartDelay  
  Unsigned32 as lpX21TestDisplayInterval  
  Unsigned32 as lpX21TestDuration  

LpX21TestResultsEntry  
SEQUENCE    
  Counter32 as lpX21TestElapsedTime  
  Unsigned32 as lpX21TestTimeRemaining  
  INTEGER as lpX21TestCauseOfTermination  
  PassportCounter64 as lpX21TestBitsTx  
  PassportCounter64 as lpX21TestBytesTx  
  PassportCounter64 as lpX21TestFrmTx  
  PassportCounter64 as lpX21TestBitsRx  
  PassportCounter64 as lpX21TestBytesRx  
  PassportCounter64 as lpX21TestFrmRx  
  PassportCounter64 as lpX21TestErroredFrmRx  
  AsciiString as lpX21TestBitErrorRate  

LpSonetRowStatusEntry  
SEQUENCE    
  RowStatus as lpSonetRowStatus  
  DisplayString as lpSonetComponentName  
  StorageType as lpSonetStorageType  
  Integer32 as lpSonetIndex  

LpSonetProvEntry  
SEQUENCE    
  INTEGER as lpSonetClockingSource  

LpSonetCidDataEntry  
SEQUENCE    
  Unsigned32 as lpSonetCustomerIdentifier  

LpSonetAdminInfoEntry  
SEQUENCE    
  AsciiString as lpSonetVendor  
  AsciiString as lpSonetCommentText  

LpSonetIfEntryEntry  
SEQUENCE    
  INTEGER as lpSonetIfAdminStatus  
  InterfaceIndex as lpSonetIfIndex  

LpSonetOperStatusEntry  
SEQUENCE    
  INTEGER as lpSonetSnmpOperStatus  

LpSonetStateEntry  
SEQUENCE    
  INTEGER as lpSonetAdminState  
  INTEGER as lpSonetOperationalState  
  INTEGER as lpSonetUsageState  
  OCTET STRING as lpSonetAvailabilityStatus  
  OCTET STRING as lpSonetProceduralStatus  
  OCTET STRING as lpSonetControlStatus  
  OCTET STRING as lpSonetAlarmStatus  
  INTEGER as lpSonetStandbyStatus  
  INTEGER as lpSonetUnknownStatus  

LpSonetOperEntry  
SEQUENCE    
  INTEGER as lpSonetLosAlarm  
  INTEGER as lpSonetLofAlarm  
  INTEGER as lpSonetRxAisAlarm  
  INTEGER as lpSonetRxRfiAlarm  
  INTEGER as lpSonetTxAis  
  INTEGER as lpSonetTxRdi  
  INTEGER as lpSonetUnusableTxClockRefAlarm  

LpSonetStatsEntry  
SEQUENCE    
  Counter32 as lpSonetRunningTime  
  Counter32 as lpSonetErrorFreeSec  
  Counter32 as lpSonetSectCodeViolations  
  Counter32 as lpSonetSectErroredSec  
  Counter32 as lpSonetSectSevErroredSec  
  Counter32 as lpSonetSectLosSec  
  Counter32 as lpSonetSectSevErroredFrmSec  
  Counter32 as lpSonetSectFailures  
  Counter32 as lpSonetLineCodeViolations  
  Counter32 as lpSonetLineErroredSec  
  Counter32 as lpSonetLineSevErroredSec  
  Counter32 as lpSonetLineAisSec  
  Counter32 as lpSonetLineUnavailSec  
  Counter32 as lpSonetLineFailures  
  Counter32 as lpSonetFarEndLineErrorFreeSec  
  Counter32 as lpSonetFarEndLineCodeViolations  
  Counter32 as lpSonetFarEndLineErroredSec  
  Counter32 as lpSonetFarEndLineSevErroredSec  
  Counter32 as lpSonetFarEndLineAisSec  
  Counter32 as lpSonetFarEndLineUnavailSec  
  Counter32 as lpSonetFarEndLineFailures  

LpSonetPathRowStatusEntry  
SEQUENCE    
  RowStatus as lpSonetPathRowStatus  
  DisplayString as lpSonetPathComponentName  
  StorageType as lpSonetPathStorageType  
  Integer32 as lpSonetPathIndex  

LpSonetPathProvEntry  
SEQUENCE    
  Link as lpSonetPathApplicationFramerName  

LpSonetPathCidDataEntry  
SEQUENCE    
  Unsigned32 as lpSonetPathCustomerIdentifier  

LpSonetPathStateEntry  
SEQUENCE    
  INTEGER as lpSonetPathAdminState  
  INTEGER as lpSonetPathOperationalState  
  INTEGER as lpSonetPathUsageState  
  OCTET STRING as lpSonetPathAvailabilityStatus  
  OCTET STRING as lpSonetPathProceduralStatus  
  OCTET STRING as lpSonetPathControlStatus  
  OCTET STRING as lpSonetPathAlarmStatus  
  INTEGER as lpSonetPathStandbyStatus  
  INTEGER as lpSonetPathUnknownStatus  

LpSonetPathIfEntryEntry  
SEQUENCE    
  INTEGER as lpSonetPathIfAdminStatus  
  InterfaceIndex as lpSonetPathIfIndex  

LpSonetPathOperStatusEntry  
SEQUENCE    
  INTEGER as lpSonetPathSnmpOperStatus  

LpSonetPathOperEntry  
SEQUENCE    
  INTEGER as lpSonetPathLopAlarm  
  INTEGER as lpSonetPathRxAisAlarm  
  INTEGER as lpSonetPathRxRfiAlarm  
  INTEGER as lpSonetPathSignalLabelMismatch  
  INTEGER as lpSonetPathTxAis  
  INTEGER as lpSonetPathTxRdi  

LpSonetPathStatsEntry  
SEQUENCE    
  Counter32 as lpSonetPathPathErrorFreeSec  
  Counter32 as lpSonetPathPathCodeViolations  
  Counter32 as lpSonetPathPathErroredSec  
  Counter32 as lpSonetPathPathSevErroredSec  
  Counter32 as lpSonetPathPathAisLopSec  
  Counter32 as lpSonetPathPathUnavailSec  
  Counter32 as lpSonetPathPathFailures  
  Counter32 as lpSonetPathFarEndPathErrorFreeSec  
  Counter32 as lpSonetPathFarEndPathCodeViolations  
  Counter32 as lpSonetPathFarEndPathErroredSec  
  Counter32 as lpSonetPathFarEndPathSevErroredSec  
  Counter32 as lpSonetPathFarEndPathAisLopSec  
  Counter32 as lpSonetPathFarEndPathUnavailSec  
  Counter32 as lpSonetPathFarEndPathFailures  

LpSonetPathCellRowStatusEntry  
SEQUENCE    
  RowStatus as lpSonetPathCellRowStatus  
  DisplayString as lpSonetPathCellComponentName  
  StorageType as lpSonetPathCellStorageType  
  NonReplicated as lpSonetPathCellIndex  

LpSonetPathCellProvEntry  
SEQUENCE    
  Unsigned32 as lpSonetPathCellAlarmActDelay  
  INTEGER as lpSonetPathCellScrambleCellPayload  
  INTEGER as lpSonetPathCellCorrectSingleBitHeaderErrors  

LpSonetPathCellOperEntry  
SEQUENCE    
  INTEGER as lpSonetPathCellLcdAlarm  

LpSonetPathCellStatsEntry  
SEQUENCE    
  Counter32 as lpSonetPathCellUncorrectableHecErrors  
  Counter32 as lpSonetPathCellSevErroredSec  
  Gauge32 as lpSonetPathCellReceiveCellUtilization  
  Gauge32 as lpSonetPathCellTransmitCellUtilization  
  Counter32 as lpSonetPathCellCorrectableHeaderErrors  

LpSonetTestRowStatusEntry  
SEQUENCE    
  RowStatus as lpSonetTestRowStatus  
  DisplayString as lpSonetTestComponentName  
  StorageType as lpSonetTestStorageType  
  NonReplicated as lpSonetTestIndex  

LpSonetTestStateEntry  
SEQUENCE    
  INTEGER as lpSonetTestAdminState  
  INTEGER as lpSonetTestOperationalState  
  INTEGER as lpSonetTestUsageState  

LpSonetTestSetupEntry  
SEQUENCE    
  AsciiString as lpSonetTestPurpose  
  INTEGER as lpSonetTestType  
  Unsigned32 as lpSonetTestFrmSize  
  INTEGER as lpSonetTestFrmPatternType  
  Hex as lpSonetTestCustomizedPattern  
  Unsigned32 as lpSonetTestDataStartDelay  
  Unsigned32 as lpSonetTestDisplayInterval  
  Unsigned32 as lpSonetTestDuration  

LpSonetTestResultsEntry  
SEQUENCE    
  Counter32 as lpSonetTestElapsedTime  
  Unsigned32 as lpSonetTestTimeRemaining  
  INTEGER as lpSonetTestCauseOfTermination  
  PassportCounter64 as lpSonetTestBitsTx  
  PassportCounter64 as lpSonetTestBytesTx  
  PassportCounter64 as lpSonetTestFrmTx  
  PassportCounter64 as lpSonetTestBitsRx  
  PassportCounter64 as lpSonetTestBytesRx  
  PassportCounter64 as lpSonetTestFrmRx  
  PassportCounter64 as lpSonetTestErroredFrmRx  
  AsciiString as lpSonetTestBitErrorRate  

LpSdhRowStatusEntry  
SEQUENCE    
  RowStatus as lpSdhRowStatus  
  DisplayString as lpSdhComponentName  
  StorageType as lpSdhStorageType  
  Integer32 as lpSdhIndex  

LpSdhProvEntry  
SEQUENCE    
  INTEGER as lpSdhClockingSource  

LpSdhCidDataEntry  
SEQUENCE    
  Unsigned32 as lpSdhCustomerIdentifier  

LpSdhAdminInfoEntry  
SEQUENCE    
  AsciiString as lpSdhVendor  
  AsciiString as lpSdhCommentText  

LpSdhIfEntryEntry  
SEQUENCE    
  INTEGER as lpSdhIfAdminStatus  
  InterfaceIndex as lpSdhIfIndex  

LpSdhOperStatusEntry  
SEQUENCE    
  INTEGER as lpSdhSnmpOperStatus  

LpSdhStateEntry  
SEQUENCE    
  INTEGER as lpSdhAdminState  
  INTEGER as lpSdhOperationalState  
  INTEGER as lpSdhUsageState  
  OCTET STRING as lpSdhAvailabilityStatus  
  OCTET STRING as lpSdhProceduralStatus  
  OCTET STRING as lpSdhControlStatus  
  OCTET STRING as lpSdhAlarmStatus  
  INTEGER as lpSdhStandbyStatus  
  INTEGER as lpSdhUnknownStatus  

LpSdhOperEntry  
SEQUENCE    
  INTEGER as lpSdhLosAlarm  
  INTEGER as lpSdhLofAlarm  
  INTEGER as lpSdhRxAisAlarm  
  INTEGER as lpSdhRxRfiAlarm  
  INTEGER as lpSdhTxAis  
  INTEGER as lpSdhTxRdi  
  INTEGER as lpSdhUnusableTxClockRefAlarm  

LpSdhStatsEntry  
SEQUENCE    
  Counter32 as lpSdhRunningTime  
  Counter32 as lpSdhErrorFreeSec  
  Counter32 as lpSdhSectCodeViolations  
  Counter32 as lpSdhSectErroredSec  
  Counter32 as lpSdhSectSevErroredSec  
  Counter32 as lpSdhSectLosSec  
  Counter32 as lpSdhSectSevErroredFrmSec  
  Counter32 as lpSdhSectFailures  
  Counter32 as lpSdhLineCodeViolations  
  Counter32 as lpSdhLineErroredSec  
  Counter32 as lpSdhLineSevErroredSec  
  Counter32 as lpSdhLineAisSec  
  Counter32 as lpSdhLineUnavailSec  
  Counter32 as lpSdhLineFailures  
  Counter32 as lpSdhFarEndLineErrorFreeSec  
  Counter32 as lpSdhFarEndLineCodeViolations  
  Counter32 as lpSdhFarEndLineErroredSec  
  Counter32 as lpSdhFarEndLineSevErroredSec  
  Counter32 as lpSdhFarEndLineAisSec  
  Counter32 as lpSdhFarEndLineUnavailSec  
  Counter32 as lpSdhFarEndLineFailures  

LpSdhPathRowStatusEntry  
SEQUENCE    
  RowStatus as lpSdhPathRowStatus  
  DisplayString as lpSdhPathComponentName  
  StorageType as lpSdhPathStorageType  
  Integer32 as lpSdhPathIndex  

LpSdhPathProvEntry  
SEQUENCE    
  Link as lpSdhPathApplicationFramerName  

LpSdhPathCidDataEntry  
SEQUENCE    
  Unsigned32 as lpSdhPathCustomerIdentifier  

LpSdhPathStateEntry  
SEQUENCE    
  INTEGER as lpSdhPathAdminState  
  INTEGER as lpSdhPathOperationalState  
  INTEGER as lpSdhPathUsageState  
  OCTET STRING as lpSdhPathAvailabilityStatus  
  OCTET STRING as lpSdhPathProceduralStatus  
  OCTET STRING as lpSdhPathControlStatus  
  OCTET STRING as lpSdhPathAlarmStatus  
  INTEGER as lpSdhPathStandbyStatus  
  INTEGER as lpSdhPathUnknownStatus  

LpSdhPathIfEntryEntry  
SEQUENCE    
  INTEGER as lpSdhPathIfAdminStatus  
  InterfaceIndex as lpSdhPathIfIndex  

LpSdhPathOperStatusEntry  
SEQUENCE    
  INTEGER as lpSdhPathSnmpOperStatus  

LpSdhPathOperEntry  
SEQUENCE    
  INTEGER as lpSdhPathLopAlarm  
  INTEGER as lpSdhPathRxAisAlarm  
  INTEGER as lpSdhPathRxRfiAlarm  
  INTEGER as lpSdhPathSignalLabelMismatch  
  INTEGER as lpSdhPathTxAis  
  INTEGER as lpSdhPathTxRdi  

LpSdhPathStatsEntry  
SEQUENCE    
  Counter32 as lpSdhPathPathErrorFreeSec  
  Counter32 as lpSdhPathPathCodeViolations  
  Counter32 as lpSdhPathPathErroredSec  
  Counter32 as lpSdhPathPathSevErroredSec  
  Counter32 as lpSdhPathPathAisLopSec  
  Counter32 as lpSdhPathPathUnavailSec  
  Counter32 as lpSdhPathPathFailures  
  Counter32 as lpSdhPathFarEndPathErrorFreeSec  
  Counter32 as lpSdhPathFarEndPathCodeViolations  
  Counter32 as lpSdhPathFarEndPathErroredSec  
  Counter32 as lpSdhPathFarEndPathSevErroredSec  
  Counter32 as lpSdhPathFarEndPathAisLopSec  
  Counter32 as lpSdhPathFarEndPathUnavailSec  
  Counter32 as lpSdhPathFarEndPathFailures  

LpSdhPathCellRowStatusEntry  
SEQUENCE    
  RowStatus as lpSdhPathCellRowStatus  
  DisplayString as lpSdhPathCellComponentName  
  StorageType as lpSdhPathCellStorageType  
  NonReplicated as lpSdhPathCellIndex  

LpSdhPathCellProvEntry  
SEQUENCE    
  Unsigned32 as lpSdhPathCellAlarmActDelay  
  INTEGER as lpSdhPathCellScrambleCellPayload  
  INTEGER as lpSdhPathCellCorrectSingleBitHeaderErrors  

LpSdhPathCellOperEntry  
SEQUENCE    
  INTEGER as lpSdhPathCellLcdAlarm  

LpSdhPathCellStatsEntry  
SEQUENCE    
  Counter32 as lpSdhPathCellUncorrectableHecErrors  
  Counter32 as lpSdhPathCellSevErroredSec  
  Gauge32 as lpSdhPathCellReceiveCellUtilization  
  Gauge32 as lpSdhPathCellTransmitCellUtilization  
  Counter32 as lpSdhPathCellCorrectableHeaderErrors  

LpSdhTestRowStatusEntry  
SEQUENCE    
  RowStatus as lpSdhTestRowStatus  
  DisplayString as lpSdhTestComponentName  
  StorageType as lpSdhTestStorageType  
  NonReplicated as lpSdhTestIndex  

LpSdhTestStateEntry  
SEQUENCE    
  INTEGER as lpSdhTestAdminState  
  INTEGER as lpSdhTestOperationalState  
  INTEGER as lpSdhTestUsageState  

LpSdhTestSetupEntry  
SEQUENCE    
  AsciiString as lpSdhTestPurpose  
  INTEGER as lpSdhTestType  
  Unsigned32 as lpSdhTestFrmSize  
  INTEGER as lpSdhTestFrmPatternType  
  Hex as lpSdhTestCustomizedPattern  
  Unsigned32 as lpSdhTestDataStartDelay  
  Unsigned32 as lpSdhTestDisplayInterval  
  Unsigned32 as lpSdhTestDuration  

LpSdhTestResultsEntry  
SEQUENCE    
  Counter32 as lpSdhTestElapsedTime  
  Unsigned32 as lpSdhTestTimeRemaining  
  INTEGER as lpSdhTestCauseOfTermination  
  PassportCounter64 as lpSdhTestBitsTx  
  PassportCounter64 as lpSdhTestBytesTx  
  PassportCounter64 as lpSdhTestFrmTx  
  PassportCounter64 as lpSdhTestBitsRx  
  PassportCounter64 as lpSdhTestBytesRx  
  PassportCounter64 as lpSdhTestFrmRx  
  PassportCounter64 as lpSdhTestErroredFrmRx  
  AsciiString as lpSdhTestBitErrorRate  

LpJT2RowStatusEntry  
SEQUENCE    
  RowStatus as lpJT2RowStatus  
  DisplayString as lpJT2ComponentName  
  StorageType as lpJT2StorageType  
  Integer32 as lpJT2Index  

LpJT2CidDataEntry  
SEQUENCE    
  Unsigned32 as lpJT2CustomerIdentifier  

LpJT2ProvEntry  
SEQUENCE    
  INTEGER as lpJT2ClockingSource  
  Unsigned32 as lpJT2LineLength  
  Link as lpJT2ApplicationFramerName  

LpJT2IfEntryEntry  
SEQUENCE    
  INTEGER as lpJT2IfAdminStatus  
  InterfaceIndex as lpJT2IfIndex  

LpJT2OperStatusEntry  
SEQUENCE    
  INTEGER as lpJT2SnmpOperStatus  

LpJT2StateEntry  
SEQUENCE    
  INTEGER as lpJT2AdminState  
  INTEGER as lpJT2OperationalState  
  INTEGER as lpJT2UsageState  
  OCTET STRING as lpJT2AvailabilityStatus  
  OCTET STRING as lpJT2ProceduralStatus  
  OCTET STRING as lpJT2ControlStatus  
  OCTET STRING as lpJT2AlarmStatus  
  INTEGER as lpJT2StandbyStatus  
  INTEGER as lpJT2UnknownStatus  

LpJT2OperEntry  
SEQUENCE    
  INTEGER as lpJT2LosAlarm  
  INTEGER as lpJT2LofAlarm  
  INTEGER as lpJT2RxAisPhysicalAlarm  
  INTEGER as lpJT2RxAisPayloadAlarm  
  INTEGER as lpJT2RxRaiAlarm  
  INTEGER as lpJT2TxAisPhysicalAlarm  
  INTEGER as lpJT2TxRaiAlarm  

LpJT2StatsEntry  
SEQUENCE    
  Counter32 as lpJT2RunningTime  
  Counter32 as lpJT2ErrorFreeSec  
  Counter32 as lpJT2ErroredSec  
  Counter32 as lpJT2SevErroredSec  
  Counter32 as lpJT2SevErroredFrmSec  
  Counter32 as lpJT2UnavailSec  
  Counter32 as lpJT2BpvErrors  
  Counter32 as lpJT2CrcErrors  
  Counter32 as lpJT2FrameErrors  
  Counter32 as lpJT2LosStateChanges  

LpJT2AdminInfoEntry  
SEQUENCE    
  AsciiString as lpJT2Vendor  
  AsciiString as lpJT2CommentText  

LpJT2TestRowStatusEntry  
SEQUENCE    
  RowStatus as lpJT2TestRowStatus  
  DisplayString as lpJT2TestComponentName  
  StorageType as lpJT2TestStorageType  
  NonReplicated as lpJT2TestIndex  

LpJT2TestStateEntry  
SEQUENCE    
  INTEGER as lpJT2TestAdminState  
  INTEGER as lpJT2TestOperationalState  
  INTEGER as lpJT2TestUsageState  

LpJT2TestSetupEntry  
SEQUENCE    
  AsciiString as lpJT2TestPurpose  
  INTEGER as lpJT2TestType  
  Unsigned32 as lpJT2TestFrmSize  
  INTEGER as lpJT2TestFrmPatternType  
  Hex as lpJT2TestCustomizedPattern  
  Unsigned32 as lpJT2TestDataStartDelay  
  Unsigned32 as lpJT2TestDisplayInterval  
  Unsigned32 as lpJT2TestDuration  

LpJT2TestResultsEntry  
SEQUENCE    
  Counter32 as lpJT2TestElapsedTime  
  Unsigned32 as lpJT2TestTimeRemaining  
  INTEGER as lpJT2TestCauseOfTermination  
  PassportCounter64 as lpJT2TestBitsTx  
  PassportCounter64 as lpJT2TestBytesTx  
  PassportCounter64 as lpJT2TestFrmTx  
  PassportCounter64 as lpJT2TestBitsRx  
  PassportCounter64 as lpJT2TestBytesRx  
  PassportCounter64 as lpJT2TestFrmRx  
  PassportCounter64 as lpJT2TestErroredFrmRx  
  AsciiString as lpJT2TestBitErrorRate  

LpJT2CellRowStatusEntry  
SEQUENCE    
  RowStatus as lpJT2CellRowStatus  
  DisplayString as lpJT2CellComponentName  
  StorageType as lpJT2CellStorageType  
  NonReplicated as lpJT2CellIndex  

LpJT2CellProvEntry  
SEQUENCE    
  Unsigned32 as lpJT2CellAlarmActDelay  
  INTEGER as lpJT2CellScrambleCellPayload  
  INTEGER as lpJT2CellCorrectSingleBitHeaderErrors  

LpJT2CellOperEntry  
SEQUENCE    
  INTEGER as lpJT2CellLcdAlarm  

LpJT2CellStatsEntry  
SEQUENCE    
  Counter32 as lpJT2CellUncorrectableHecErrors  
  Counter32 as lpJT2CellSevErroredSec  
  Gauge32 as lpJT2CellReceiveCellUtilization  
  Gauge32 as lpJT2CellTransmitCellUtilization  
  Counter32 as lpJT2CellCorrectableHeaderErrors  

LpHssiRowStatusEntry  
SEQUENCE    
  RowStatus as lpHssiRowStatus  
  DisplayString as lpHssiComponentName  
  StorageType as lpHssiStorageType  
  Integer32 as lpHssiIndex  

LpHssiProvEntry  
SEQUENCE    
  INTEGER as lpHssiLinkMode  
  OCTET STRING as lpHssiReadyLineState  
  OCTET STRING as lpHssiDataTransferLineState  
  Unsigned32 as lpHssiLineSpeed  
  Link as lpHssiApplicationFramerName  

LpHssiCidDataEntry  
SEQUENCE    
  Unsigned32 as lpHssiCustomerIdentifier  

LpHssiAdminInfoEntry  
SEQUENCE    
  AsciiString as lpHssiVendor  
  AsciiString as lpHssiCommentText  

LpHssiIfEntryEntry  
SEQUENCE    
  INTEGER as lpHssiIfAdminStatus  
  InterfaceIndex as lpHssiIfIndex  

LpHssiOperStatusEntry  
SEQUENCE    
  INTEGER as lpHssiSnmpOperStatus  

LpHssiStateEntry  
SEQUENCE    
  INTEGER as lpHssiAdminState  
  INTEGER as lpHssiOperationalState  
  INTEGER as lpHssiUsageState  
  OCTET STRING as lpHssiAvailabilityStatus  
  OCTET STRING as lpHssiProceduralStatus  
  OCTET STRING as lpHssiControlStatus  
  OCTET STRING as lpHssiAlarmStatus  
  INTEGER as lpHssiStandbyStatus  
  INTEGER as lpHssiUnknownStatus  

LpHssiOperEntry  
SEQUENCE    
  INTEGER as lpHssiActualLinkMode  
  OCTET STRING as lpHssiLineState  
  Gauge32 as lpHssiActualTxLineSpeed  
  Gauge32 as lpHssiActualRxLineSpeed  
  Counter32 as lpHssiDataXferStateChanges  

LpHssiTestRowStatusEntry  
SEQUENCE    
  RowStatus as lpHssiTestRowStatus  
  DisplayString as lpHssiTestComponentName  
  StorageType as lpHssiTestStorageType  
  NonReplicated as lpHssiTestIndex  

LpHssiTestStateEntry  
SEQUENCE    
  INTEGER as lpHssiTestAdminState  
  INTEGER as lpHssiTestOperationalState  
  INTEGER as lpHssiTestUsageState  

LpHssiTestSetupEntry  
SEQUENCE    
  AsciiString as lpHssiTestPurpose  
  INTEGER as lpHssiTestType  
  Unsigned32 as lpHssiTestFrmSize  
  INTEGER as lpHssiTestFrmPatternType  
  Hex as lpHssiTestCustomizedPattern  
  Unsigned32 as lpHssiTestDataStartDelay  
  Unsigned32 as lpHssiTestDisplayInterval  
  Unsigned32 as lpHssiTestDuration  

LpHssiTestResultsEntry  
SEQUENCE    
  Counter32 as lpHssiTestElapsedTime  
  Unsigned32 as lpHssiTestTimeRemaining  
  INTEGER as lpHssiTestCauseOfTermination  
  PassportCounter64 as lpHssiTestBitsTx  
  PassportCounter64 as lpHssiTestBytesTx  
  PassportCounter64 as lpHssiTestFrmTx  
  PassportCounter64 as lpHssiTestBitsRx  
  PassportCounter64 as lpHssiTestBytesRx  
  PassportCounter64 as lpHssiTestFrmRx  
  PassportCounter64 as lpHssiTestErroredFrmRx  
  AsciiString as lpHssiTestBitErrorRate  

LpEngRowStatusEntry  
SEQUENCE    
  RowStatus as lpEngRowStatus  
  DisplayString as lpEngComponentName  
  StorageType as lpEngStorageType  
  NonReplicated as lpEngIndex  

LpEngDsRowStatusEntry  
SEQUENCE    
  RowStatus as lpEngDsRowStatus  
  DisplayString as lpEngDsComponentName  
  StorageType as lpEngDsStorageType  
  INTEGER as lpEngDsIndex  

LpEngDsOperEntry  
SEQUENCE    
  Unsigned32 as lpEngDsAgentQueueSize  

LpEngDsOvRowStatusEntry  
SEQUENCE    
  RowStatus as lpEngDsOvRowStatus  
  DisplayString as lpEngDsOvComponentName  
  StorageType as lpEngDsOvStorageType  
  NonReplicated as lpEngDsOvIndex  

LpEngDsOvProvEntry  
SEQUENCE    
  Unsigned32 as lpEngDsOvAgentQueueSize