
| RFC-1212 | RFC1155-SMI | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Nortel-Magellan-Passport-StandardTextualConventionsMIB | Nortel-Magellan-Passport-TextualConventionsMIB |
| OBJECT-TYPE | IpAddress | components |
| passportMIBs | RowPointer | DisplayString |
| StorageType | RowStatus | Integer32 |
| Unsigned32 | AsciiString | NonReplicated |
| AsciiStringIndex |
| nmis | 1.3.6.1.4.1.562.2.4.1.17 | ||
| OBJECT IDENTIFIER | |||
| nmisRowStatusTable | 1.3.6.1.4.1.562.2.4.1.17.1 | ||
| This entry controls the addition and deletion of nmis components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NmisRowStatusEntry | |||
| nmisRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.17.1.1 | ||
| A single entry in the table represents a single nmis component. | |||
| OBJECT-TYPE | |||
| NmisRowStatusEntry | |||
| nmisRowStatus | 1.3.6.1.4.1.562.2.4.1.17.1.1.1 | ||
| This variable is used as the basis for SNMP naming of nmis components. These components cannot be added nor deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| nmisComponentName | 1.3.6.1.4.1.562.2.4.1.17.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| nmisStorageType | 1.3.6.1.4.1.562.2.4.1.17.1.1.4 | ||
| This variable represents the storage type value for the nmis tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| nmisIndex | 1.3.6.1.4.1.562.2.4.1.17.1.1.10 | ||
| This variable represents the index for the nmis tables. | |||
| OBJECT-TYPE | |||
| NonReplicated | |||
| nmisLocal | 1.3.6.1.4.1.562.2.4.1.17.2 | ||
| OBJECT IDENTIFIER | |||
| nmisLocalRowStatusTable | 1.3.6.1.4.1.562.2.4.1.17.2.1 | ||
| This entry controls the addition and deletion of nmisLocal components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NmisLocalRowStatusEntry | |||
| nmisLocalRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.17.2.1.1 | ||
| A single entry in the table represents a single nmisLocal component. | |||
| OBJECT-TYPE | |||
| NmisLocalRowStatusEntry | |||
| nmisLocalRowStatus | 1.3.6.1.4.1.562.2.4.1.17.2.1.1.1 | ||
| This variable is used as the basis for SNMP naming of nmisLocal components. These components cannot be added nor deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| nmisLocalComponentName | 1.3.6.1.4.1.562.2.4.1.17.2.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| nmisLocalStorageType | 1.3.6.1.4.1.562.2.4.1.17.2.1.1.4 | ||
| This variable represents the storage type value for the nmisLocal tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| nmisLocalIndex | 1.3.6.1.4.1.562.2.4.1.17.2.1.1.10 | ||
| This variable represents the index for the nmisLocal tables. | |||
| OBJECT-TYPE | |||
| NonReplicated | |||
| nmisLocalSession | 1.3.6.1.4.1.562.2.4.1.17.2.2 | ||
| OBJECT IDENTIFIER | |||
| nmisLocalSessionRowStatusTable | 1.3.6.1.4.1.562.2.4.1.17.2.2.1 | ||
| This entry controls the addition and deletion of nmisLocalSession components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NmisLocalSessionRowStatusEntry | |||
| nmisLocalSessionRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.17.2.2.1.1 | ||
| A single entry in the table represents a single nmisLocalSession component. | |||
| OBJECT-TYPE | |||
| NmisLocalSessionRowStatusEntry | |||
| nmisLocalSessionRowStatus | 1.3.6.1.4.1.562.2.4.1.17.2.2.1.1.1 | ||
| This variable is used as the basis for SNMP naming of nmisLocalSession components. These components cannot be added nor deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| nmisLocalSessionComponentName | 1.3.6.1.4.1.562.2.4.1.17.2.2.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| nmisLocalSessionStorageType | 1.3.6.1.4.1.562.2.4.1.17.2.2.1.1.4 | ||
| This variable represents the storage type value for the nmisLocalSession tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| nmisLocalSessionIndex | 1.3.6.1.4.1.562.2.4.1.17.2.2.1.1.10 | ||
| This variable represents the index for the nmisLocalSession tables. | |||
| OBJECT-TYPE | |||
| Integer32 | 1..2 | ||
| nmisLocalSessionOperTable | 1.3.6.1.4.1.562.2.4.1.17.2.2.10 | ||
| This group contains the operational attributes for a Local session. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NmisLocalSessionOperEntry | |||
| nmisLocalSessionOperEntry | 1.3.6.1.4.1.562.2.4.1.17.2.2.10.1 | ||
| An entry in the nmisLocalSessionOperTable. | |||
| OBJECT-TYPE | |||
| NmisLocalSessionOperEntry | |||
| nmisLocalSessionUserid | 1.3.6.1.4.1.562.2.4.1.17.2.2.10.1.1 | ||
| This attribute indicates the Userid logged in to the Session. | |||
| OBJECT-TYPE | |||
| AsciiString | SIZE(8) | ||
| nmisLocalSessionDataStreams | 1.3.6.1.4.1.562.2.4.1.17.2.2.10.1.2 | ||
| This attribute indicates which data streams will be transmitted back to the operator through this session. Only a userid with a command impact of system administration may register for logs. Description of bits: notused0(0) alarm(1) log(2) debug(3) scn(4) | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1) | ||
| nmisLocalSessionHostCard | 1.3.6.1.4.1.562.2.4.1.17.2.2.10.1.3 | ||
| This attribute holds the component name of the host control processor Card servicing the local operator session. | |||
| OBJECT-TYPE | |||
| RowPointer | |||
| nmisLocalSessionScreenWidth | 1.3.6.1.4.1.562.2.4.1.17.2.2.10.1.4 | ||
| This attribute indicates the maximum width (in characters) of operator command responses. Beyond this maximum, responses are either truncated or wrapped onto the next line, as appropriate. Asynchronous responses, such as alarms, are always displayed using a 79 character width. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 79..2000 | ||
| nmisLocalStateTable | 1.3.6.1.4.1.562.2.4.1.17.2.10 | ||
| This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NmisLocalStateEntry | |||
| nmisLocalStateEntry | 1.3.6.1.4.1.562.2.4.1.17.2.10.1 | ||
| An entry in the nmisLocalStateTable. | |||
| OBJECT-TYPE | |||
| NmisLocalStateEntry | |||
| nmisLocalAdminState | 1.3.6.1.4.1.562.2.4.1.17.2.10.1.1 | ||
| This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. | |||
| OBJECT-TYPE | |||
| INTEGER | locked(0), unlocked(1), shuttingDown(2) | ||
| nmisLocalOperationalState | 1.3.6.1.4.1.562.2.4.1.17.2.10.1.2 | ||
| This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(0), enabled(1) | ||
| nmisLocalUsageState | 1.3.6.1.4.1.562.2.4.1.17.2.10.1.3 | ||
| This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. | |||
| OBJECT-TYPE | |||
| INTEGER | idle(0), active(1), busy(2) | ||
| nmisLocalOperTable | 1.3.6.1.4.1.562.2.4.1.17.2.11 | ||
| This group contains the operational attributes for an NMIS manager. This group is common to all NMIS managers. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NmisLocalOperEntry | |||
| nmisLocalOperEntry | 1.3.6.1.4.1.562.2.4.1.17.2.11.1 | ||
| An entry in the nmisLocalOperTable. | |||
| OBJECT-TYPE | |||
| NmisLocalOperEntry | |||
| nmisLocalMaxAllowedSessions | 1.3.6.1.4.1.562.2.4.1.17.2.11.1.1 | ||
| This attribute indicates the maximum number of simultaneous sessions the manager will allow. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 2..35 | ||
| nmisLocalActiveSessions | 1.3.6.1.4.1.562.2.4.1.17.2.11.1.2 | ||
| This attribute indicates the number of simultaneous sessions currently active under the manager. Note that there may be fewer Session components than what is shown here, since an active session could be in the midst of logging in and may not yet be fully up. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..35 | ||
| nmisTelnet | 1.3.6.1.4.1.562.2.4.1.17.3 | ||
| OBJECT IDENTIFIER | |||
| nmisTelnetRowStatusTable | 1.3.6.1.4.1.562.2.4.1.17.3.1 | ||
| This entry controls the addition and deletion of nmisTelnet components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NmisTelnetRowStatusEntry | |||
| nmisTelnetRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.17.3.1.1 | ||
| A single entry in the table represents a single nmisTelnet component. | |||
| OBJECT-TYPE | |||
| NmisTelnetRowStatusEntry | |||
| nmisTelnetRowStatus | 1.3.6.1.4.1.562.2.4.1.17.3.1.1.1 | ||
| This variable is used as the basis for SNMP naming of nmisTelnet components. These components cannot be added nor deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| nmisTelnetComponentName | 1.3.6.1.4.1.562.2.4.1.17.3.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| nmisTelnetStorageType | 1.3.6.1.4.1.562.2.4.1.17.3.1.1.4 | ||
| This variable represents the storage type value for the nmisTelnet tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| nmisTelnetIndex | 1.3.6.1.4.1.562.2.4.1.17.3.1.1.10 | ||
| This variable represents the index for the nmisTelnet tables. | |||
| OBJECT-TYPE | |||
| NonReplicated | |||
| nmisTelnetSession | 1.3.6.1.4.1.562.2.4.1.17.3.2 | ||
| OBJECT IDENTIFIER | |||
| nmisTelnetSessionRowStatusTable | 1.3.6.1.4.1.562.2.4.1.17.3.2.1 | ||
| This entry controls the addition and deletion of nmisTelnetSession components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NmisTelnetSessionRowStatusEntry | |||
| nmisTelnetSessionRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.17.3.2.1.1 | ||
| A single entry in the table represents a single nmisTelnetSession component. | |||
| OBJECT-TYPE | |||
| NmisTelnetSessionRowStatusEntry | |||
| nmisTelnetSessionRowStatus | 1.3.6.1.4.1.562.2.4.1.17.3.2.1.1.1 | ||
| This variable is used as the basis for SNMP naming of nmisTelnetSession components. These components cannot be added nor deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| nmisTelnetSessionComponentName | 1.3.6.1.4.1.562.2.4.1.17.3.2.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| nmisTelnetSessionStorageType | 1.3.6.1.4.1.562.2.4.1.17.3.2.1.1.4 | ||
| This variable represents the storage type value for the nmisTelnetSession tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| nmisTelnetSessionIndex | 1.3.6.1.4.1.562.2.4.1.17.3.2.1.1.10 | ||
| This variable represents the index for the nmisTelnetSession tables. | |||
| OBJECT-TYPE | |||
| Integer32 | 1..8 | ||
| nmisTelnetSessionClient | 1.3.6.1.4.1.562.2.4.1.17.3.2.2 | ||
| OBJECT IDENTIFIER | |||
| nmisTelnetSessionClientRowStatusTable | 1.3.6.1.4.1.562.2.4.1.17.3.2.2.1 | ||
| This entry controls the addition and deletion of nmisTelnetSessionClient components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NmisTelnetSessionClientRowStatusEntry | |||
| nmisTelnetSessionClientRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.17.3.2.2.1.1 | ||
| A single entry in the table represents a single nmisTelnetSessionClient component. | |||
| OBJECT-TYPE | |||
| NmisTelnetSessionClientRowStatusEntry | |||
| nmisTelnetSessionClientRowStatus | 1.3.6.1.4.1.562.2.4.1.17.3.2.2.1.1.1 | ||
| This variable is used as the basis for SNMP naming of nmisTelnetSessionClient components. These components cannot be added nor deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| nmisTelnetSessionClientComponentName | 1.3.6.1.4.1.562.2.4.1.17.3.2.2.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| nmisTelnetSessionClientStorageType | 1.3.6.1.4.1.562.2.4.1.17.3.2.2.1.1.4 | ||
| This variable represents the storage type value for the nmisTelnetSessionClient tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| nmisTelnetSessionClientIndex | 1.3.6.1.4.1.562.2.4.1.17.3.2.2.1.1.10 | ||
| This variable represents the index for the nmisTelnetSessionClient tables. | |||
| OBJECT-TYPE | |||
| NonReplicated | |||
| nmisTelnetSessionClientOperTable | 1.3.6.1.4.1.562.2.4.1.17.3.2.2.10 | ||
| This group contains the operational attributes for a Telnet client. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NmisTelnetSessionClientOperEntry | |||
| nmisTelnetSessionClientOperEntry | 1.3.6.1.4.1.562.2.4.1.17.3.2.2.10.1 | ||
| An entry in the nmisTelnetSessionClientOperTable. | |||
| OBJECT-TYPE | |||
| NmisTelnetSessionClientOperEntry | |||
| nmisTelnetSessionClientVirtualRouter | 1.3.6.1.4.1.562.2.4.1.17.3.2.2.10.1.1 | ||
| This attribute indicates the VR instance that determines which address space the remoteIpAddr belongs to. | |||
| OBJECT-TYPE | |||
| RowPointer | |||
| nmisTelnetSessionClientRemoteIpAddr | 1.3.6.1.4.1.562.2.4.1.17.3.2.2.10.1.2 | ||
| This attribute indicates the IP address of the remote side of the client connection. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| nmisTelnetSessionClientRemoteTcpPort | 1.3.6.1.4.1.562.2.4.1.17.3.2.2.10.1.3 | ||
| This attribute indicates the TCP port number of the remote side of the client connection. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| nmisTelnetSessionOperTable | 1.3.6.1.4.1.562.2.4.1.17.3.2.10 | ||
| This group contains the operational attributes for a Telnet session. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NmisTelnetSessionOperEntry | |||
| nmisTelnetSessionOperEntry | 1.3.6.1.4.1.562.2.4.1.17.3.2.10.1 | ||
| An entry in the nmisTelnetSessionOperTable. | |||
| OBJECT-TYPE | |||
| NmisTelnetSessionOperEntry | |||
| nmisTelnetSessionUserid | 1.3.6.1.4.1.562.2.4.1.17.3.2.10.1.1 | ||
| This attribute indicates the userid logged in to the session. | |||
| OBJECT-TYPE | |||
| AsciiString | SIZE(8) | ||
| nmisTelnetSessionDataStreams | 1.3.6.1.4.1.562.2.4.1.17.3.2.10.1.2 | ||
| This attribute indicates which data streams (alarm, debug, log, scn) will be transmitted back to the operator through this session. Only a userid with a command impact of system administration may register for logs. When a client connection is up through this interface, all of the values are turned off. This means that this data is discarded when the session has a Telnet client connection set up. When the client connection terminates, the data which was being received prior to the client being set up is requested again. Description of bits: notused0(0) alarm(1) log(2) debug(3) scn(4) | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1) | ||
| nmisTelnetSessionRemoteIpAddr | 1.3.6.1.4.1.562.2.4.1.17.3.2.10.1.3 | ||
| This attribute indicates the IP address of the remote device connected to the session. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| nmisTelnetSessionRemoteTcpPort | 1.3.6.1.4.1.562.2.4.1.17.3.2.10.1.4 | ||
| This attribute indicates the TCP port number of the Telnet client being used on the remote device connected to the session. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| nmisTelnetSessionScreenWidth | 1.3.6.1.4.1.562.2.4.1.17.3.2.10.1.5 | ||
| This attribute indicates the maximum width (in characters) of operator command responses. Beyond this maximum, responses are either truncated or wrapped onto the next line, as appropriate. Asynchronous responses, such as alarms, are always displayed using a 79 character width. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 79..2000 | ||
| nmisTelnetStateTable | 1.3.6.1.4.1.562.2.4.1.17.3.10 | ||
| This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NmisTelnetStateEntry | |||
| nmisTelnetStateEntry | 1.3.6.1.4.1.562.2.4.1.17.3.10.1 | ||
| An entry in the nmisTelnetStateTable. | |||
| OBJECT-TYPE | |||
| NmisTelnetStateEntry | |||
| nmisTelnetAdminState | 1.3.6.1.4.1.562.2.4.1.17.3.10.1.1 | ||
| This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. | |||
| OBJECT-TYPE | |||
| INTEGER | locked(0), unlocked(1), shuttingDown(2) | ||
| nmisTelnetOperationalState | 1.3.6.1.4.1.562.2.4.1.17.3.10.1.2 | ||
| This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(0), enabled(1) | ||
| nmisTelnetUsageState | 1.3.6.1.4.1.562.2.4.1.17.3.10.1.3 | ||
| This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. | |||
| OBJECT-TYPE | |||
| INTEGER | idle(0), active(1), busy(2) | ||
| nmisTelnetOperTable | 1.3.6.1.4.1.562.2.4.1.17.3.11 | ||
| This group contains the operational attributes for an NMIS manager. This group is common to all NMIS managers. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NmisTelnetOperEntry | |||
| nmisTelnetOperEntry | 1.3.6.1.4.1.562.2.4.1.17.3.11.1 | ||
| An entry in the nmisTelnetOperTable. | |||
| OBJECT-TYPE | |||
| NmisTelnetOperEntry | |||
| nmisTelnetMaxAllowedSessions | 1.3.6.1.4.1.562.2.4.1.17.3.11.1.1 | ||
| This attribute indicates the maximum number of simultaneous sessions the manager will allow. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 2..35 | ||
| nmisTelnetActiveSessions | 1.3.6.1.4.1.562.2.4.1.17.3.11.1.2 | ||
| This attribute indicates the number of simultaneous sessions currently active under the manager. Note that there may be fewer Session components than what is shown here, since an active session could be in the midst of logging in and may not yet be fully up. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..35 | ||
| nmisFmip | 1.3.6.1.4.1.562.2.4.1.17.4 | ||
| OBJECT IDENTIFIER | |||
| nmisFmipRowStatusTable | 1.3.6.1.4.1.562.2.4.1.17.4.1 | ||
| This entry controls the addition and deletion of nmisFmip components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NmisFmipRowStatusEntry | |||
| nmisFmipRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.17.4.1.1 | ||
| A single entry in the table represents a single nmisFmip component. | |||
| OBJECT-TYPE | |||
| NmisFmipRowStatusEntry | |||
| nmisFmipRowStatus | 1.3.6.1.4.1.562.2.4.1.17.4.1.1.1 | ||
| This variable is used as the basis for SNMP naming of nmisFmip components. These components cannot be added nor deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| nmisFmipComponentName | 1.3.6.1.4.1.562.2.4.1.17.4.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| nmisFmipStorageType | 1.3.6.1.4.1.562.2.4.1.17.4.1.1.4 | ||
| This variable represents the storage type value for the nmisFmip tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| nmisFmipIndex | 1.3.6.1.4.1.562.2.4.1.17.4.1.1.10 | ||
| This variable represents the index for the nmisFmip tables. | |||
| OBJECT-TYPE | |||
| NonReplicated | |||
| nmisFmipSession | 1.3.6.1.4.1.562.2.4.1.17.4.2 | ||
| OBJECT IDENTIFIER | |||
| nmisFmipSessionRowStatusTable | 1.3.6.1.4.1.562.2.4.1.17.4.2.1 | ||
| This entry controls the addition and deletion of nmisFmipSession components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NmisFmipSessionRowStatusEntry | |||
| nmisFmipSessionRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.17.4.2.1.1 | ||
| A single entry in the table represents a single nmisFmipSession component. | |||
| OBJECT-TYPE | |||
| NmisFmipSessionRowStatusEntry | |||
| nmisFmipSessionRowStatus | 1.3.6.1.4.1.562.2.4.1.17.4.2.1.1.1 | ||
| This variable is used as the basis for SNMP naming of nmisFmipSession components. These components cannot be added nor deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| nmisFmipSessionComponentName | 1.3.6.1.4.1.562.2.4.1.17.4.2.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| nmisFmipSessionStorageType | 1.3.6.1.4.1.562.2.4.1.17.4.2.1.1.4 | ||
| This variable represents the storage type value for the nmisFmipSession tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| nmisFmipSessionIndex | 1.3.6.1.4.1.562.2.4.1.17.4.2.1.1.10 | ||
| This variable represents the index for the nmisFmipSession tables. | |||
| OBJECT-TYPE | |||
| Integer32 | 1..35 | ||
| nmisFmipSessionOperTable | 1.3.6.1.4.1.562.2.4.1.17.4.2.10 | ||
| This group contains the operational attributes for an FMIP session. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NmisFmipSessionOperEntry | |||
| nmisFmipSessionOperEntry | 1.3.6.1.4.1.562.2.4.1.17.4.2.10.1 | ||
| An entry in the nmisFmipSessionOperTable. | |||
| OBJECT-TYPE | |||
| NmisFmipSessionOperEntry | |||
| nmisFmipSessionUserid | 1.3.6.1.4.1.562.2.4.1.17.4.2.10.1.1 | ||
| This attribute indicates the userid logged in to the session. | |||
| OBJECT-TYPE | |||
| AsciiString | SIZE(8) | ||
| nmisFmipSessionDataStreams | 1.3.6.1.4.1.562.2.4.1.17.4.2.10.1.2 | ||
| This attribute indicates which data streams will be transmitted back to the operator through this session. Only a userid with a command impact of system administration may register for logs. Description of bits: notused0(0) alarm(1) log(2) debug(3) scn(4) | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1) | ||
| nmisFmipSessionRemoteIpAddr | 1.3.6.1.4.1.562.2.4.1.17.4.2.10.1.3 | ||
| This attribute indicates the IP address of the remote device connected to the session. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| nmisFmipSessionRemoteTcpPort | 1.3.6.1.4.1.562.2.4.1.17.4.2.10.1.4 | ||
| This attribute indicates the TCP port number of the FMIP client being used on the remote device connected to the session. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| nmisFmipSessionScreenWidth | 1.3.6.1.4.1.562.2.4.1.17.4.2.10.1.5 | ||
| This attribute indicates the maximum width (in characters) of operator command responses. Beyond this maximum, responses are either truncated or wrapped onto the next line, as appropriate. Asynchronous responses, such as alarms, are always displayed using a 79 character width. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 79..2000 | ||
| nmisFmipStateTable | 1.3.6.1.4.1.562.2.4.1.17.4.10 | ||
| This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NmisFmipStateEntry | |||
| nmisFmipStateEntry | 1.3.6.1.4.1.562.2.4.1.17.4.10.1 | ||
| An entry in the nmisFmipStateTable. | |||
| OBJECT-TYPE | |||
| NmisFmipStateEntry | |||
| nmisFmipAdminState | 1.3.6.1.4.1.562.2.4.1.17.4.10.1.1 | ||
| This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. | |||
| OBJECT-TYPE | |||
| INTEGER | locked(0), unlocked(1), shuttingDown(2) | ||
| nmisFmipOperationalState | 1.3.6.1.4.1.562.2.4.1.17.4.10.1.2 | ||
| This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(0), enabled(1) | ||
| nmisFmipUsageState | 1.3.6.1.4.1.562.2.4.1.17.4.10.1.3 | ||
| This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. | |||
| OBJECT-TYPE | |||
| INTEGER | idle(0), active(1), busy(2) | ||
| nmisFmipOperTable | 1.3.6.1.4.1.562.2.4.1.17.4.11 | ||
| This group contains the operational attributes for an NMIS manager. This group is common to all NMIS managers. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NmisFmipOperEntry | |||
| nmisFmipOperEntry | 1.3.6.1.4.1.562.2.4.1.17.4.11.1 | ||
| An entry in the nmisFmipOperTable. | |||
| OBJECT-TYPE | |||
| NmisFmipOperEntry | |||
| nmisFmipMaxAllowedSessions | 1.3.6.1.4.1.562.2.4.1.17.4.11.1.1 | ||
| This attribute indicates the maximum number of simultaneous sessions the manager will allow. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 2..35 | ||
| nmisFmipActiveSessions | 1.3.6.1.4.1.562.2.4.1.17.4.11.1.2 | ||
| This attribute indicates the number of simultaneous sessions currently active under the manager. Note that there may be fewer Session components than what is shown here, since an active session could be in the midst of logging in and may not yet be fully up. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..35 | ||
| nmisFtp | 1.3.6.1.4.1.562.2.4.1.17.5 | ||
| OBJECT IDENTIFIER | |||
| nmisFtpRowStatusTable | 1.3.6.1.4.1.562.2.4.1.17.5.1 | ||
| This entry controls the addition and deletion of nmisFtp components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NmisFtpRowStatusEntry | |||
| nmisFtpRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.17.5.1.1 | ||
| A single entry in the table represents a single nmisFtp component. | |||
| OBJECT-TYPE | |||
| NmisFtpRowStatusEntry | |||
| nmisFtpRowStatus | 1.3.6.1.4.1.562.2.4.1.17.5.1.1.1 | ||
| This variable is used as the basis for SNMP naming of nmisFtp components. These components cannot be added nor deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| nmisFtpComponentName | 1.3.6.1.4.1.562.2.4.1.17.5.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| nmisFtpStorageType | 1.3.6.1.4.1.562.2.4.1.17.5.1.1.4 | ||
| This variable represents the storage type value for the nmisFtp tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| nmisFtpIndex | 1.3.6.1.4.1.562.2.4.1.17.5.1.1.10 | ||
| This variable represents the index for the nmisFtp tables. | |||
| OBJECT-TYPE | |||
| NonReplicated | |||
| nmisFtpSession | 1.3.6.1.4.1.562.2.4.1.17.5.2 | ||
| OBJECT IDENTIFIER | |||
| nmisFtpSessionRowStatusTable | 1.3.6.1.4.1.562.2.4.1.17.5.2.1 | ||
| This entry controls the addition and deletion of nmisFtpSession components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NmisFtpSessionRowStatusEntry | |||
| nmisFtpSessionRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.17.5.2.1.1 | ||
| A single entry in the table represents a single nmisFtpSession component. | |||
| OBJECT-TYPE | |||
| NmisFtpSessionRowStatusEntry | |||
| nmisFtpSessionRowStatus | 1.3.6.1.4.1.562.2.4.1.17.5.2.1.1.1 | ||
| This variable is used as the basis for SNMP naming of nmisFtpSession components. These components cannot be added nor deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| nmisFtpSessionComponentName | 1.3.6.1.4.1.562.2.4.1.17.5.2.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| nmisFtpSessionStorageType | 1.3.6.1.4.1.562.2.4.1.17.5.2.1.1.4 | ||
| This variable represents the storage type value for the nmisFtpSession tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| nmisFtpSessionIndex | 1.3.6.1.4.1.562.2.4.1.17.5.2.1.1.10 | ||
| This variable represents the index for the nmisFtpSession tables. | |||
| OBJECT-TYPE | |||
| Integer32 | 1..16 | ||
| nmisFtpSessionOperTable | 1.3.6.1.4.1.562.2.4.1.17.5.2.10 | ||
| This group contains the operational attributes for an FTP session. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NmisFtpSessionOperEntry | |||
| nmisFtpSessionOperEntry | 1.3.6.1.4.1.562.2.4.1.17.5.2.10.1 | ||
| An entry in the nmisFtpSessionOperTable. | |||
| OBJECT-TYPE | |||
| NmisFtpSessionOperEntry | |||
| nmisFtpSessionUserid | 1.3.6.1.4.1.562.2.4.1.17.5.2.10.1.1 | ||
| This attribute indicates the userid logged in to the session. | |||
| OBJECT-TYPE | |||
| AsciiString | SIZE(8) | ||
| nmisFtpSessionRemoteIpAddr | 1.3.6.1.4.1.562.2.4.1.17.5.2.10.1.2 | ||
| This attribute indicates the IP address of the remote device connected to the session. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| nmisFtpSessionRemoteTcpPort | 1.3.6.1.4.1.562.2.4.1.17.5.2.10.1.3 | ||
| This attribute indicates the TCP port number of the FTP control connection being used on the remote device connected to the session. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| nmisFtpStateTable | 1.3.6.1.4.1.562.2.4.1.17.5.10 | ||
| This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NmisFtpStateEntry | |||
| nmisFtpStateEntry | 1.3.6.1.4.1.562.2.4.1.17.5.10.1 | ||
| An entry in the nmisFtpStateTable. | |||
| OBJECT-TYPE | |||
| NmisFtpStateEntry | |||
| nmisFtpAdminState | 1.3.6.1.4.1.562.2.4.1.17.5.10.1.1 | ||
| This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. | |||
| OBJECT-TYPE | |||
| INTEGER | locked(0), unlocked(1), shuttingDown(2) | ||
| nmisFtpOperationalState | 1.3.6.1.4.1.562.2.4.1.17.5.10.1.2 | ||
| This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(0), enabled(1) | ||
| nmisFtpUsageState | 1.3.6.1.4.1.562.2.4.1.17.5.10.1.3 | ||
| This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. | |||
| OBJECT-TYPE | |||
| INTEGER | idle(0), active(1), busy(2) | ||
| nmisFtpOperTable | 1.3.6.1.4.1.562.2.4.1.17.5.11 | ||
| This group contains the operational attributes for an NMIS manager. This group is common to all NMIS managers. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NmisFtpOperEntry | |||
| nmisFtpOperEntry | 1.3.6.1.4.1.562.2.4.1.17.5.11.1 | ||
| An entry in the nmisFtpOperTable. | |||
| OBJECT-TYPE | |||
| NmisFtpOperEntry | |||
| nmisFtpMaxAllowedSessions | 1.3.6.1.4.1.562.2.4.1.17.5.11.1.1 | ||
| This attribute indicates the maximum number of simultaneous sessions the manager will allow. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 2..35 | ||
| nmisFtpActiveSessions | 1.3.6.1.4.1.562.2.4.1.17.5.11.1.2 | ||
| This attribute indicates the number of simultaneous sessions currently active under the manager. Note that there may be fewer Session components than what is shown here, since an active session could be in the midst of logging in and may not yet be fully up. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..35 | ||
| ac | 1.3.6.1.4.1.562.2.4.1.18 | ||
| OBJECT IDENTIFIER | |||
| acRowStatusTable | 1.3.6.1.4.1.562.2.4.1.18.1 | ||
| This entry controls the addition and deletion of ac components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AcRowStatusEntry | |||
| acRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.18.1.1 | ||
| A single entry in the table represents a single ac component. | |||
| OBJECT-TYPE | |||
| AcRowStatusEntry | |||
| acRowStatus | 1.3.6.1.4.1.562.2.4.1.18.1.1.1 | ||
| This variable is used as the basis for SNMP naming of ac components. These components can be added. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| acComponentName | 1.3.6.1.4.1.562.2.4.1.18.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| acStorageType | 1.3.6.1.4.1.562.2.4.1.18.1.1.4 | ||
| This variable represents the storage type value for the ac tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| acIndex | 1.3.6.1.4.1.562.2.4.1.18.1.1.10 | ||
| This variable represents the index for the ac tables. | |||
| OBJECT-TYPE | |||
| NonReplicated | |||
| acUserid | 1.3.6.1.4.1.562.2.4.1.18.2 | ||
| OBJECT IDENTIFIER | |||
| acUseridRowStatusTable | 1.3.6.1.4.1.562.2.4.1.18.2.1 | ||
| This entry controls the addition and deletion of acUserid components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AcUseridRowStatusEntry | |||
| acUseridRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.18.2.1.1 | ||
| A single entry in the table represents a single acUserid component. | |||
| OBJECT-TYPE | |||
| AcUseridRowStatusEntry | |||
| acUseridRowStatus | 1.3.6.1.4.1.562.2.4.1.18.2.1.1.1 | ||
| This variable is used as the basis for SNMP naming of acUserid components. These components can be added and deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| acUseridComponentName | 1.3.6.1.4.1.562.2.4.1.18.2.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| acUseridStorageType | 1.3.6.1.4.1.562.2.4.1.18.2.1.1.4 | ||
| This variable represents the storage type value for the acUserid tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| acUseridIndex | 1.3.6.1.4.1.562.2.4.1.18.2.1.1.10 | ||
| This variable represents the index for the acUserid tables. | |||
| OBJECT-TYPE | |||
| AsciiStringIndex | SIZE(1..8) | ||
| acUseridProvTable | 1.3.6.1.4.1.562.2.4.1.18.2.10 | ||
| This group contains the provisionable attributes for a userid. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AcUseridProvEntry | |||
| acUseridProvEntry | 1.3.6.1.4.1.562.2.4.1.18.2.10.1 | ||
| An entry in the acUseridProvTable. | |||
| OBJECT-TYPE | |||
| AcUseridProvEntry | |||
| acUseridPassword | 1.3.6.1.4.1.562.2.4.1.18.2.10.1.1 | ||
| This attribute holds the password for the userid. This is a write-only attribute to provide additional security for passwords. The password string consists of 5-8 characters, which may be any printable ASCII characters. If the password string includes any non-alphanumeric character, such as $ or *, the entire string must be enclosed in double quotes. Letters in the password string are case-sensitive. | |||
| OBJECT-TYPE | |||
| AsciiString | SIZE(5..8) | ||
| acUseridCustomerIdentifier | 1.3.6.1.4.1.562.2.4.1.18.2.10.1.2 | ||
| This attribute indicates the Customer Identifier (CID) assigned to the userid. The CID is used in Customer Network Management (CNM). A CNM operator may only send commands to components provisioned with the same CID as the operator. A CNM operator will only receive event data, such as alarms, which is generated by components provisioned with the same CID as the operator. The special CID of 0 is reserved for the network owner, known as the Netman. The Passport CID attribute is compatible with DPN-100 Netman and Basic CIDs. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..8191 | ||
| acUseridCommandScope | 1.3.6.1.4.1.562.2.4.1.18.2.10.1.3 | ||
| This attribute indicates the command scope assigned to the userid. The scope determines the importance of the components on which the userid will be allowed to execute commands. Scope has three levels: 1) Network scope implies the userid can manage components that affect the operation of the entire network, such as trunks. 2) Device scope implies the userid can manage components that affect the operation of the entire Passport module, such as processors or the file system. 3) Application scope implies the userid can manage components that affect the operation of a single application. Note that scope is hierarchical: A userid provisioned with network scope can also manage components with a scope of device or application. | |||
| OBJECT-TYPE | |||
| INTEGER | network(1), device(2), application(3) | ||
| acUseridCommandImpact | 1.3.6.1.4.1.562.2.4.1.18.2.10.1.4 | ||
| This attribute indicates the command impact assigned to the userid. The impact determines the importance of the commands which the userid will be allowed to execute. Impact has five levels: 1) Debug impact implies the userid can issue all debugging commands. Debug is the highest impact level. 2) System Administration impact implies the userid can issue provisioning commands on security components. This means the userid can Add, Delete, Display, or Set the Userid and IpAccess subcomponents of AccessControl. 3) Configuration impact implies the userid can issue provisioning commands to alter the provisioned configuration of the Passport module, such as Start Prov, Add, Delete, and Set. 4) Service impact implies the userid can issue operational commands which may affect the service of running components, such as Lock and Unlock. 5) Passive impact implies the userid can only issue query commands which display unrestricted information but otherwise do not affect the operation or configuration of the Passport module. Commands such as List and Display. Passive is the lowest impact level. Note that impact is hierarchical: A userid provisioned with debug impact can also issue all other commands at lower impact levels. | |||
| OBJECT-TYPE | |||
| INTEGER | debug(3), systemAdministration(4), configuration(5), service(6), passive(7) | ||
| acUseridAllowedAccess | 1.3.6.1.4.1.562.2.4.1.18.2.10.1.5 | ||
| This attribute indicates the set of network management interfaces through which the userid will be allowed incoming access to the Passport. The allowedAccess attribute can be used to restrict a userid to a desired subset of the network management interfaces provided. Description of bits: local(0) telnet(1) fmip(2) ftp(3) | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1) | ||
| acUseridLoginDirectory | 1.3.6.1.4.1.562.2.4.1.18.2.10.1.6 | ||
| This attribute is the login directory for file system commands or FTP commands. The userid will initially be placed in this directory upon logging in to Telnet, FMIP, Local or FTP. The default value of '/' is the root of the /sfs/ shadowed file system. | |||
| OBJECT-TYPE | |||
| AsciiString | SIZE(1..128) | ||
| acUseridAllowedOutAccess | 1.3.6.1.4.1.562.2.4.1.18.2.10.1.7 | ||
| This attribute indicates whether or not the userid will be allowed outgoing Telnet access from the Passport. Description of bits: telnet(0) | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1) | ||
| acIpAccess | 1.3.6.1.4.1.562.2.4.1.18.3 | ||
| OBJECT IDENTIFIER | |||
| acIpAccessRowStatusTable | 1.3.6.1.4.1.562.2.4.1.18.3.1 | ||
| This entry controls the addition and deletion of acIpAccess components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AcIpAccessRowStatusEntry | |||
| acIpAccessRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.18.3.1.1 | ||
| A single entry in the table represents a single acIpAccess component. | |||
| OBJECT-TYPE | |||
| AcIpAccessRowStatusEntry | |||
| acIpAccessRowStatus | 1.3.6.1.4.1.562.2.4.1.18.3.1.1.1 | ||
| This variable is used as the basis for SNMP naming of acIpAccess components. These components can be added and deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| acIpAccessComponentName | 1.3.6.1.4.1.562.2.4.1.18.3.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| acIpAccessStorageType | 1.3.6.1.4.1.562.2.4.1.18.3.1.1.4 | ||
| This variable represents the storage type value for the acIpAccess tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| acIpAccessIndex | 1.3.6.1.4.1.562.2.4.1.18.3.1.1.10 | ||
| This variable represents the index for the acIpAccess tables. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| acIpAccessProvTable | 1.3.6.1.4.1.562.2.4.1.18.3.10 | ||
| This group contains the provisionable attributes for an IpAccess component. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AcIpAccessProvEntry | |||
| acIpAccessProvEntry | 1.3.6.1.4.1.562.2.4.1.18.3.10.1 | ||
| An entry in the acIpAccessProvTable. | |||
| OBJECT-TYPE | |||
| AcIpAccessProvEntry | |||
| acIpAccessIpAddressMask | 1.3.6.1.4.1.562.2.4.1.18.3.10.1.1 | ||
| This attribute indicates the bit mask indicating the significant bits which are used in the comparison of an incoming IP address against the 'friendly' IP address in the instance value of the IpAccess component. This bit mask is ANDed to the incoming IP address, and ANDed to the instance value, before the comparison. An IP subnetwork address, in combination with this bit mask attribute, may be provisioned to include an entire IP subnetwork into the friendly IP address list with a single IpAccess component. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| acProvTable | 1.3.6.1.4.1.562.2.4.1.18.10 | ||
| This group contains the provisionable attributes which apply to the overall access of the the node. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| AcProvEntry | |||
| acProvEntry | 1.3.6.1.4.1.562.2.4.1.18.10.1 | ||
| An entry in the acProvTable. | |||
| OBJECT-TYPE | |||
| AcProvEntry | |||
| acPublicKeyAuth | 1.3.6.1.4.1.562.2.4.1.18.10.1.1 | ||
| This attribute indicates whether Telnet sessions require a public key exchange in order to log in to the node. FMIP sessions always require a public key exchange for login authentication. Description of bits: telnet(0) | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1) | ||
| mgmtInterfacesMIB | 1.3.6.1.4.1.562.2.4.2.15 | ||
| OBJECT IDENTIFIER | |||
| mgmtInterfacesGroup | 1.3.6.1.4.1.562.2.4.2.15.1 | ||
| OBJECT IDENTIFIER | |||
| mgmtInterfacesGroupBE | 1.3.6.1.4.1.562.2.4.2.15.1.5 | ||
| OBJECT IDENTIFIER | |||
| mgmtInterfacesGroupBE01 | 1.3.6.1.4.1.562.2.4.2.15.1.5.2 | ||
| OBJECT IDENTIFIER | |||
| mgmtInterfacesGroupBE01A | 1.3.6.1.4.1.562.2.4.2.15.1.5.2.2 | ||
| OBJECT IDENTIFIER | |||
| mgmtInterfacesCapabilities | 1.3.6.1.4.1.562.2.4.2.15.3 | ||
| OBJECT IDENTIFIER | |||
| mgmtInterfacesCapabilitiesBE | 1.3.6.1.4.1.562.2.4.2.15.3.5 | ||
| OBJECT IDENTIFIER | |||
| mgmtInterfacesCapabilitiesBE01 | 1.3.6.1.4.1.562.2.4.2.15.3.5.2 | ||
| OBJECT IDENTIFIER | |||
| mgmtInterfacesCapabilitiesBE01A | 1.3.6.1.4.1.562.2.4.2.15.3.5.2.2 | ||
| OBJECT IDENTIFIER | |||
| NmisRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as nmisRowStatus | |||
| DisplayString as nmisComponentName | |||
| StorageType as nmisStorageType | |||
| NonReplicated as nmisIndex | |||
| NmisLocalRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as nmisLocalRowStatus | |||
| DisplayString as nmisLocalComponentName | |||
| StorageType as nmisLocalStorageType | |||
| NonReplicated as nmisLocalIndex | |||
| NmisLocalStateEntry | |||
| SEQUENCE | |||
| INTEGER as nmisLocalAdminState | |||
| INTEGER as nmisLocalOperationalState | |||
| INTEGER as nmisLocalUsageState | |||
| NmisLocalOperEntry | |||
| SEQUENCE | |||
| Unsigned32 as nmisLocalMaxAllowedSessions | |||
| Unsigned32 as nmisLocalActiveSessions | |||
| NmisLocalSessionRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as nmisLocalSessionRowStatus | |||
| DisplayString as nmisLocalSessionComponentName | |||
| StorageType as nmisLocalSessionStorageType | |||
| Integer32 as nmisLocalSessionIndex | |||
| NmisLocalSessionOperEntry | |||
| SEQUENCE | |||
| AsciiString as nmisLocalSessionUserid | |||
| OCTET STRING as nmisLocalSessionDataStreams | |||
| RowPointer as nmisLocalSessionHostCard | |||
| Unsigned32 as nmisLocalSessionScreenWidth | |||
| NmisTelnetRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as nmisTelnetRowStatus | |||
| DisplayString as nmisTelnetComponentName | |||
| StorageType as nmisTelnetStorageType | |||
| NonReplicated as nmisTelnetIndex | |||
| NmisTelnetStateEntry | |||
| SEQUENCE | |||
| INTEGER as nmisTelnetAdminState | |||
| INTEGER as nmisTelnetOperationalState | |||
| INTEGER as nmisTelnetUsageState | |||
| NmisTelnetOperEntry | |||
| SEQUENCE | |||
| Unsigned32 as nmisTelnetMaxAllowedSessions | |||
| Unsigned32 as nmisTelnetActiveSessions | |||
| NmisTelnetSessionRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as nmisTelnetSessionRowStatus | |||
| DisplayString as nmisTelnetSessionComponentName | |||
| StorageType as nmisTelnetSessionStorageType | |||
| Integer32 as nmisTelnetSessionIndex | |||
| NmisTelnetSessionOperEntry | |||
| SEQUENCE | |||
| AsciiString as nmisTelnetSessionUserid | |||
| OCTET STRING as nmisTelnetSessionDataStreams | |||
| IpAddress as nmisTelnetSessionRemoteIpAddr | |||
| Unsigned32 as nmisTelnetSessionRemoteTcpPort | |||
| Unsigned32 as nmisTelnetSessionScreenWidth | |||
| NmisTelnetSessionClientRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as nmisTelnetSessionClientRowStatus | |||
| DisplayString as nmisTelnetSessionClientComponentName | |||
| StorageType as nmisTelnetSessionClientStorageType | |||
| NonReplicated as nmisTelnetSessionClientIndex | |||
| NmisTelnetSessionClientOperEntry | |||
| SEQUENCE | |||
| RowPointer as nmisTelnetSessionClientVirtualRouter | |||
| IpAddress as nmisTelnetSessionClientRemoteIpAddr | |||
| Unsigned32 as nmisTelnetSessionClientRemoteTcpPort | |||
| NmisFmipRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as nmisFmipRowStatus | |||
| DisplayString as nmisFmipComponentName | |||
| StorageType as nmisFmipStorageType | |||
| NonReplicated as nmisFmipIndex | |||
| NmisFmipStateEntry | |||
| SEQUENCE | |||
| INTEGER as nmisFmipAdminState | |||
| INTEGER as nmisFmipOperationalState | |||
| INTEGER as nmisFmipUsageState | |||
| NmisFmipOperEntry | |||
| SEQUENCE | |||
| Unsigned32 as nmisFmipMaxAllowedSessions | |||
| Unsigned32 as nmisFmipActiveSessions | |||
| NmisFmipSessionRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as nmisFmipSessionRowStatus | |||
| DisplayString as nmisFmipSessionComponentName | |||
| StorageType as nmisFmipSessionStorageType | |||
| Integer32 as nmisFmipSessionIndex | |||
| NmisFmipSessionOperEntry | |||
| SEQUENCE | |||
| AsciiString as nmisFmipSessionUserid | |||
| OCTET STRING as nmisFmipSessionDataStreams | |||
| IpAddress as nmisFmipSessionRemoteIpAddr | |||
| Unsigned32 as nmisFmipSessionRemoteTcpPort | |||
| Unsigned32 as nmisFmipSessionScreenWidth | |||
| NmisFtpRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as nmisFtpRowStatus | |||
| DisplayString as nmisFtpComponentName | |||
| StorageType as nmisFtpStorageType | |||
| NonReplicated as nmisFtpIndex | |||
| NmisFtpStateEntry | |||
| SEQUENCE | |||
| INTEGER as nmisFtpAdminState | |||
| INTEGER as nmisFtpOperationalState | |||
| INTEGER as nmisFtpUsageState | |||
| NmisFtpOperEntry | |||
| SEQUENCE | |||
| Unsigned32 as nmisFtpMaxAllowedSessions | |||
| Unsigned32 as nmisFtpActiveSessions | |||
| NmisFtpSessionRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as nmisFtpSessionRowStatus | |||
| DisplayString as nmisFtpSessionComponentName | |||
| StorageType as nmisFtpSessionStorageType | |||
| Integer32 as nmisFtpSessionIndex | |||
| NmisFtpSessionOperEntry | |||
| SEQUENCE | |||
| AsciiString as nmisFtpSessionUserid | |||
| IpAddress as nmisFtpSessionRemoteIpAddr | |||
| Unsigned32 as nmisFtpSessionRemoteTcpPort | |||
| AcRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as acRowStatus | |||
| DisplayString as acComponentName | |||
| StorageType as acStorageType | |||
| NonReplicated as acIndex | |||
| AcProvEntry | |||
| SEQUENCE | |||
| OCTET STRING as acPublicKeyAuth | |||
| AcUseridRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as acUseridRowStatus | |||
| DisplayString as acUseridComponentName | |||
| StorageType as acUseridStorageType | |||
| AsciiStringIndex as acUseridIndex | |||
| AcUseridProvEntry | |||
| SEQUENCE | |||
| AsciiString as acUseridPassword | |||
| Unsigned32 as acUseridCustomerIdentifier | |||
| INTEGER as acUseridCommandScope | |||
| INTEGER as acUseridCommandImpact | |||
| OCTET STRING as acUseridAllowedAccess | |||
| AsciiString as acUseridLoginDirectory | |||
| OCTET STRING as acUseridAllowedOutAccess | |||
| AcIpAccessRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as acIpAccessRowStatus | |||
| DisplayString as acIpAccessComponentName | |||
| StorageType as acIpAccessStorageType | |||
| IpAddress as acIpAccessIndex | |||
| AcIpAccessProvEntry | |||
| SEQUENCE | |||
| IpAddress as acIpAccessIpAddressMask | |||