Nortel-Magellan-Passport-VnetEtsiQsigMIB

File: Nortel-Magellan-Passport-VnetEtsiQsigMIB.mib (42382 bytes)

Imported modules

RFC-1212 Nortel-Magellan-Passport-UsefulDefinitionsMIB Nortel-Magellan-Passport-StandardTextualConventionsMIB
Nortel-Magellan-Passport-TextualConventionsMIB Nortel-Magellan-Passport-VoiceNetworkingMIB

Imported symbols

OBJECT-TYPE passportMIBs DisplayString
StorageType RowStatus Unsigned32
NonReplicated Link sigChanIndex
sigChan

Defined Objects

sigChanEQsig 1.3.6.1.4.1.562.2.4.1.115.2
OBJECT IDENTIFIER    

sigChanEQsigRowStatusTable 1.3.6.1.4.1.562.2.4.1.115.2.1
This entry controls the addition and deletion of sigChanEQsig components.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanEQsigRowStatusEntry

sigChanEQsigRowStatusEntry 1.3.6.1.4.1.562.2.4.1.115.2.1.1
A single entry in the table represents a single sigChanEQsig component.
OBJECT-TYPE    
  SigChanEQsigRowStatusEntry  

sigChanEQsigRowStatus 1.3.6.1.4.1.562.2.4.1.115.2.1.1.1
This variable is used as the basis for SNMP naming of sigChanEQsig components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

sigChanEQsigComponentName 1.3.6.1.4.1.562.2.4.1.115.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

sigChanEQsigStorageType 1.3.6.1.4.1.562.2.4.1.115.2.1.1.4
This variable represents the storage type value for the sigChanEQsig tables.
OBJECT-TYPE    
  StorageType  

sigChanEQsigIndex 1.3.6.1.4.1.562.2.4.1.115.2.1.1.10
This variable represents the index for the sigChanEQsig tables.
OBJECT-TYPE    
  NonReplicated  

sigChanEQsigFramer 1.3.6.1.4.1.562.2.4.1.115.2.2
OBJECT IDENTIFIER    

sigChanEQsigFramerRowStatusTable 1.3.6.1.4.1.562.2.4.1.115.2.2.1
This entry controls the addition and deletion of sigChanEQsigFramer components.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanEQsigFramerRowStatusEntry

sigChanEQsigFramerRowStatusEntry 1.3.6.1.4.1.562.2.4.1.115.2.2.1.1
A single entry in the table represents a single sigChanEQsigFramer component.
OBJECT-TYPE    
  SigChanEQsigFramerRowStatusEntry  

sigChanEQsigFramerRowStatus 1.3.6.1.4.1.562.2.4.1.115.2.2.1.1.1
This variable is used as the basis for SNMP naming of sigChanEQsigFramer components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

sigChanEQsigFramerComponentName 1.3.6.1.4.1.562.2.4.1.115.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

sigChanEQsigFramerStorageType 1.3.6.1.4.1.562.2.4.1.115.2.2.1.1.4
This variable represents the storage type value for the sigChanEQsigFramer tables.
OBJECT-TYPE    
  StorageType  

sigChanEQsigFramerIndex 1.3.6.1.4.1.562.2.4.1.115.2.2.1.1.10
This variable represents the index for the sigChanEQsigFramer tables.
OBJECT-TYPE    
  NonReplicated  

sigChanEQsigFramerProvTable 1.3.6.1.4.1.562.2.4.1.115.2.2.10
This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanEQsigFramerProvEntry

sigChanEQsigFramerProvEntry 1.3.6.1.4.1.562.2.4.1.115.2.2.10.1
An entry in the sigChanEQsigFramerProvTable.
OBJECT-TYPE    
  SigChanEQsigFramerProvEntry  

sigChanEQsigFramerInterfaceName 1.3.6.1.4.1.562.2.4.1.115.2.2.10.1.1
This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run.
OBJECT-TYPE    
  Link  

sigChanEQsigFramerStateTable 1.3.6.1.4.1.562.2.4.1.115.2.2.12
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanEQsigFramerStateEntry

sigChanEQsigFramerStateEntry 1.3.6.1.4.1.562.2.4.1.115.2.2.12.1
An entry in the sigChanEQsigFramerStateTable.
OBJECT-TYPE    
  SigChanEQsigFramerStateEntry  

sigChanEQsigFramerAdminState 1.3.6.1.4.1.562.2.4.1.115.2.2.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

sigChanEQsigFramerOperationalState 1.3.6.1.4.1.562.2.4.1.115.2.2.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

sigChanEQsigFramerUsageState 1.3.6.1.4.1.562.2.4.1.115.2.2.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

sigChanEQsigFramerStatsTable 1.3.6.1.4.1.562.2.4.1.115.2.2.13
This group contains the operational statistics data for a Framer component.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanEQsigFramerStatsEntry

sigChanEQsigFramerStatsEntry 1.3.6.1.4.1.562.2.4.1.115.2.2.13.1
An entry in the sigChanEQsigFramerStatsTable.
OBJECT-TYPE    
  SigChanEQsigFramerStatsEntry  

sigChanEQsigFramerFrmToIf 1.3.6.1.4.1.562.2.4.1.115.2.2.13.1.1
This attribute counts the number of frames transmitted to the link interface by Framer. This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

sigChanEQsigFramerFrmFromIf 1.3.6.1.4.1.562.2.4.1.115.2.2.13.1.2
This attribute counts the number of frames received from the link interface by Framer. This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

sigChanEQsigFramerOctetFromIf 1.3.6.1.4.1.562.2.4.1.115.2.2.13.1.3
The number of bytes received from the link interface by Framer.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

sigChanEQsigFramerAborts 1.3.6.1.4.1.562.2.4.1.115.2.2.13.1.4
This attribute counts the total number of aborts received. This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

sigChanEQsigFramerCrcErrors 1.3.6.1.4.1.562.2.4.1.115.2.2.13.1.5
This attribute counts the total number of frames with CRC errors. This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

sigChanEQsigFramerLrcErrors 1.3.6.1.4.1.562.2.4.1.115.2.2.13.1.6
This attribute counts the total number of frames with LRC errors. This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

sigChanEQsigFramerNonOctetErrors 1.3.6.1.4.1.562.2.4.1.115.2.2.13.1.7
This attribute counts the total number of frames that were non octet aligned. This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

sigChanEQsigFramerOverruns 1.3.6.1.4.1.562.2.4.1.115.2.2.13.1.8
This attribute counts the total number of frames received from the link for which overruns occurred. This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

sigChanEQsigFramerUnderruns 1.3.6.1.4.1.562.2.4.1.115.2.2.13.1.9
This attribute counts the total number of frames transmitted to the link for which underruns occurred. This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

sigChanEQsigFramerLargeFrmErrors 1.3.6.1.4.1.562.2.4.1.115.2.2.13.1.10
This attribute counts the total number of frames received which were too large (longer than 500 bytes). This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

sigChanEQsigL2Table 1.3.6.1.4.1.562.2.4.1.115.2.11
This group specifies the provisionable layer 2 attributes of the Q.931 ITU-T protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanEQsigL2Entry

sigChanEQsigL2Entry 1.3.6.1.4.1.562.2.4.1.115.2.11.1
An entry in the sigChanEQsigL2Table.
OBJECT-TYPE    
  SigChanEQsigL2Entry  

sigChanEQsigT23 1.3.6.1.4.1.562.2.4.1.115.2.11.1.1
This attribute specifies the layer 2 enable request timer.
OBJECT-TYPE    
  Unsigned32 1..15  

sigChanEQsigT200 1.3.6.1.4.1.562.2.4.1.115.2.11.1.2
This attribute specifies the maximum time between a layer 2 frame and its acknowledgment.
OBJECT-TYPE    
  Unsigned32 1..20  

sigChanEQsigN200 1.3.6.1.4.1.562.2.4.1.115.2.11.1.3
This attribute specifies the maximum number of re-transmissions of a layer 2 frame.
OBJECT-TYPE    
  Unsigned32 1..8  

sigChanEQsigT203 1.3.6.1.4.1.562.2.4.1.115.2.11.1.4
This attribute specifies the maximum time for which layer 2 frames may be absent. Expiry triggers a check on whether the far end is alive.
OBJECT-TYPE    
  Unsigned32 2..40  

sigChanEQsigCircuitSwitchedK 1.3.6.1.4.1.562.2.4.1.115.2.11.1.6
This attribute specifies the maximum number of sequentially numbered I frames (that is, window size (k)) that may be unacknowledged at any given time for a SAP supporting primary rate (64kbit/sec) signalling.
OBJECT-TYPE    
  Unsigned32 1..127  

sigChanEQsigL3Table 1.3.6.1.4.1.562.2.4.1.115.2.12
This group represents the provisionable Layer 3 timer attributes of the ETSI Qsig protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanEQsigL3Entry

sigChanEQsigL3Entry 1.3.6.1.4.1.562.2.4.1.115.2.12.1
An entry in the sigChanEQsigL3Table.
OBJECT-TYPE    
  SigChanEQsigL3Entry  

sigChanEQsigT309 1.3.6.1.4.1.562.2.4.1.115.2.12.1.3
This attribute specifies the data link failure timer; used to ride out temporary failures.
OBJECT-TYPE    
  Unsigned32 15..120  

sigChanEQsigT310 1.3.6.1.4.1.562.2.4.1.115.2.12.1.4
This attribute specifies the call proceeding state timer.
OBJECT-TYPE    
  Unsigned32 10..120  

sigChanEQsigProvTable 1.3.6.1.4.1.562.2.4.1.115.2.13
This group defines the general options of the D-channel signalling link.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanEQsigProvEntry

sigChanEQsigProvEntry 1.3.6.1.4.1.562.2.4.1.115.2.13.1
An entry in the sigChanEQsigProvTable.
OBJECT-TYPE    
  SigChanEQsigProvEntry  

sigChanEQsigSide 1.3.6.1.4.1.562.2.4.1.115.2.13.1.1
This attribute specifies whether the interface is the network or user side of the connection. The parameter applies to both the layer 2 and layer 3 of the interface. If this attribute is set to network, then the interface is master during channel negotiation. If this attribute is set to user, then the interface is slave during channel negotiation.
OBJECT-TYPE    
  INTEGER network(1), user(2)  

sigChanEQsigMaxNonCallConcurrent 1.3.6.1.4.1.562.2.4.1.115.2.13.1.2
This attribute specifies the maximum number of simultaneous active non-call messages that are allowed.
OBJECT-TYPE    
  Unsigned32 1..30  

sigChanEQsigOverlapSendingEnabled 1.3.6.1.4.1.562.2.4.1.115.2.13.1.3
This attribute specifies whether overlap sending to the PBX is enabled.
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1)  

sigChanEQsigOverlapReceivingEnabled 1.3.6.1.4.1.562.2.4.1.115.2.13.1.4
This attribute specifies whether overlap receiving from the PBX is enabled.
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1)  

sigChanEQsigStateTable 1.3.6.1.4.1.562.2.4.1.115.2.14
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanEQsigStateEntry

sigChanEQsigStateEntry 1.3.6.1.4.1.562.2.4.1.115.2.14.1
An entry in the sigChanEQsigStateTable.
OBJECT-TYPE    
  SigChanEQsigStateEntry  

sigChanEQsigAdminState 1.3.6.1.4.1.562.2.4.1.115.2.14.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

sigChanEQsigOperationalState 1.3.6.1.4.1.562.2.4.1.115.2.14.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

sigChanEQsigUsageState 1.3.6.1.4.1.562.2.4.1.115.2.14.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

sigChanEQsigStatsTable 1.3.6.1.4.1.562.2.4.1.115.2.15
This group provides the operational components for the EtsiQsig component.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanEQsigStatsEntry

sigChanEQsigStatsEntry 1.3.6.1.4.1.562.2.4.1.115.2.15.1
An entry in the sigChanEQsigStatsTable.
OBJECT-TYPE    
  SigChanEQsigStatsEntry  

sigChanEQsigTotalCallsToIf 1.3.6.1.4.1.562.2.4.1.115.2.15.1.2
This attribute counts the total number of calls that have been made to the interface. The value wraps when it reaches its maximum.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

sigChanEQsigTotalCallsFromIf 1.3.6.1.4.1.562.2.4.1.115.2.15.1.3
This attribute counts the total number of calls from the interface. The value wraps when it reaches its maximum.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

sigChanEQsigNonCallAssocSessionsToIf 1.3.6.1.4.1.562.2.4.1.115.2.15.1.4
This attribute counts the total number of non-call associated sessions to the interface. The value wraps when it reaches its maximum.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

sigChanEQsigNonCallAssocSessionsFromIf 1.3.6.1.4.1.562.2.4.1.115.2.15.1.5
This attribute counts the total number of non-call associated sessions from the interface. The value wraps when it reaches its maximum.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

sigChanEQsigOperTable 1.3.6.1.4.1.562.2.4.1.115.2.16
This group provides the operational attributes for the EtsiQsig protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanEQsigOperEntry

sigChanEQsigOperEntry 1.3.6.1.4.1.562.2.4.1.115.2.16.1
An entry in the sigChanEQsigOperTable.
OBJECT-TYPE    
  SigChanEQsigOperEntry  

sigChanEQsigActiveChannels 1.3.6.1.4.1.562.2.4.1.115.2.16.1.1
This attribute indicates the number of currently active channels. This includes data and voice channels.
OBJECT-TYPE    
  Unsigned32 0..128  

sigChanEQsigActiveVoiceChannels 1.3.6.1.4.1.562.2.4.1.115.2.16.1.2
This attribute indicates the number of channels that are currently carrying voice.
OBJECT-TYPE    
  Unsigned32 0..128  

sigChanEQsigActiveDataChannels 1.3.6.1.4.1.562.2.4.1.115.2.16.1.3
This attribute indicates the number of channels that are currently carrying data. This does not include modem data.
OBJECT-TYPE    
  Unsigned32 0..128  

sigChanEQsigPeakActiveChannels 1.3.6.1.4.1.562.2.4.1.115.2.16.1.4
This attribute indicates the maximum number of channels that have been active on this signalling channel during the last polling period.
OBJECT-TYPE    
  Unsigned32 0..128  

sigChanEQsigPeakActiveVoiceChannels 1.3.6.1.4.1.562.2.4.1.115.2.16.1.5
This attribute indicates the maximum number of voice channels that have been active on this signalling channel during the last polling period.
OBJECT-TYPE    
  Unsigned32 0..128  

sigChanEQsigPeakActiveDataChannels 1.3.6.1.4.1.562.2.4.1.115.2.16.1.6
This attribute indicates the maximum number of data channels that have been active on this signalling channel during the last polling period.
OBJECT-TYPE    
  Unsigned32 0..128  

sigChanEQsigDChanStatus 1.3.6.1.4.1.562.2.4.1.115.2.16.1.7
This attribute indicates the state of the D-channel. outOfService means that there is no layer 2 or layer 3 connectivity to the PBX. establishing means that the signalling channel is attempting to stage the layer 2. established means that the layer 2 is enabled. If the signalling channel stays in the established state, then it is waiting for a restart from the PBX. enabling means that the resources for processing calls are being initialized. If the signalling channel stays in the enabling state then it is waiting for a restart acknowledgement from the PBX. inService means that the resources for processing calls are available. restarting means that the resources for call processing are being rei-initialized.
OBJECT-TYPE    
  INTEGER outOfService(0), establishing(1), established(2), enabling(3), inService(4), restarting(5)  

sigChanEQsigToolsTable 1.3.6.1.4.1.562.2.4.1.115.2.17
This contains a series of operational attributes which turn on and off several kinds of tracing.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanEQsigToolsEntry

sigChanEQsigToolsEntry 1.3.6.1.4.1.562.2.4.1.115.2.17.1
An entry in the sigChanEQsigToolsTable.
OBJECT-TYPE    
  SigChanEQsigToolsEntry  

sigChanEQsigTracing 1.3.6.1.4.1.562.2.4.1.115.2.17.1.1
This attribute defines which types of tracing are active for this signalling channel. The tracing messages are sent to the debug stream. To see the messages the agentQueue attribute in Col/debug must be greater than 0 and a Telnet NMIS session must list the debug stream in in its data streams (ex. set nmis telnet session/1 dataStreams debug). Different types of tracing can be enabled simultaneously. Note that tracing consumes additional CPU resources and will slow down call processing on a heavily loaded card. If there is message block exhaustion tracing will be suspended for a period and then automatically reenabled. An alarm is generated on tracing suspension and resumption. This mechanism protects the function processor against excessive numbers of tracing messages. Types of tracing include: protocolErrors - get details of any protocol errors which are occuring. Protocol errors are also reported in summary form as alarms. q931Summary - Summary of the Q.931 messages on the signalling link, including certain call details (calling number, called number, release codes). q931Hex - Q.931 messages displayed in hex format. Useful to determine protocol compliance in case of errors reported on local or remote ends. q931Symbolic - Q.931 messages parsed to give maximum detail. Useful for understanding content of messages flowing on the link. portHex - Messages in hex format being sent and received on the link. Description of bits: protocolErrors(0) q931Summary(1) q931Hex(2) q931Symbolic(3) portHex(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

sigChanEQsigEQsigSpecificProvTable 1.3.6.1.4.1.562.2.4.1.115.2.18
This group provides EtsiQsig protocol specific provisioning.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanEQsigEQsigSpecificProvEntry

sigChanEQsigEQsigSpecificProvEntry 1.3.6.1.4.1.562.2.4.1.115.2.18.1
An entry in the sigChanEQsigEQsigSpecificProvTable.
OBJECT-TYPE    
  SigChanEQsigEQsigSpecificProvEntry  

sigChanEQsigMsgSegmentation 1.3.6.1.4.1.562.2.4.1.115.2.18.1.1
This attribute allows users to enable/disable the EtsiQsig message segmentation service.
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1)  

sigChanEQsigE1ChannelNumbers 1.3.6.1.4.1.562.2.4.1.115.2.18.1.2
This attribute is applicable to E1 interfaces only. It specifies the mapping scheme between channel numbers (identified in Layer 3 messages) and timeslot numbers on the E1 link. When the attribute value is skip16, channel numbers map directly to actual E1 timeslots; therefore only channel numbers 1 - 15 and 17 - 31 are expected. When the value is contiguous, channel numbers from 1 - 30 are expected, and the following mapping is used: channels 1 - 15 are mapped to timeslots 1 - 15, and channels 16 - 30 are mapped to timeslots 17 - 31. On T1 interfaces, channel numbers are always expected in the range 1 - 23.
OBJECT-TYPE    
  INTEGER skip16(1), contiguous(2)  

sigChanEQsigEQsigSpecificOpTable 1.3.6.1.4.1.562.2.4.1.115.2.19
This group provides specific operational attributes for the Etsi Qsig protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanEQsigEQsigSpecificOpEntry

sigChanEQsigEQsigSpecificOpEntry 1.3.6.1.4.1.562.2.4.1.115.2.19.1
An entry in the sigChanEQsigEQsigSpecificOpTable.
OBJECT-TYPE    
  SigChanEQsigEQsigSpecificOpEntry  

sigChanEQsigSegmentationAccepted 1.3.6.1.4.1.562.2.4.1.115.2.19.1.1
This attribute counts the total number of times a long Etsi Qsig message has been received from a PBX and forwarded to a Passport subnet. The value wraps when it reaches its maximum.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

sigChanEQsigSegmentationFailed 1.3.6.1.4.1.562.2.4.1.115.2.19.1.2
This attribute counts the total number of times a long Etsi Qsig message has been received from a PBX and could not be forwarded as is to a Passport subnet due to end-to-end incompatibility. The value wraps when it reaches its maximum.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vnetEtsiQsigMIB 1.3.6.1.4.1.562.2.4.2.110
OBJECT IDENTIFIER    

vnetEtsiQsigGroup 1.3.6.1.4.1.562.2.4.2.110.1
OBJECT IDENTIFIER    

vnetEtsiQsigGroupBE 1.3.6.1.4.1.562.2.4.2.110.1.5
OBJECT IDENTIFIER    

vnetEtsiQsigGroupBE01 1.3.6.1.4.1.562.2.4.2.110.1.5.2
OBJECT IDENTIFIER    

vnetEtsiQsigGroupBE01A 1.3.6.1.4.1.562.2.4.2.110.1.5.2.2
OBJECT IDENTIFIER    

vnetEtsiQsigCapabilities 1.3.6.1.4.1.562.2.4.2.110.3
OBJECT IDENTIFIER    

vnetEtsiQsigCapabilitiesBE 1.3.6.1.4.1.562.2.4.2.110.3.5
OBJECT IDENTIFIER    

vnetEtsiQsigCapabilitiesBE01 1.3.6.1.4.1.562.2.4.2.110.3.5.2
OBJECT IDENTIFIER    

vnetEtsiQsigCapabilitiesBE01A 1.3.6.1.4.1.562.2.4.2.110.3.5.2.2
OBJECT IDENTIFIER    

Defined Objects

SigChanEQsigRowStatusEntry  
SEQUENCE    
  RowStatus as sigChanEQsigRowStatus  
  DisplayString as sigChanEQsigComponentName  
  StorageType as sigChanEQsigStorageType  
  NonReplicated as sigChanEQsigIndex  

SigChanEQsigL2Entry  
SEQUENCE    
  Unsigned32 as sigChanEQsigT23  
  Unsigned32 as sigChanEQsigT200  
  Unsigned32 as sigChanEQsigN200  
  Unsigned32 as sigChanEQsigT203  
  Unsigned32 as sigChanEQsigCircuitSwitchedK  

SigChanEQsigL3Entry  
SEQUENCE    
  Unsigned32 as sigChanEQsigT309  
  Unsigned32 as sigChanEQsigT310  

SigChanEQsigProvEntry  
SEQUENCE    
  INTEGER as sigChanEQsigSide  
  Unsigned32 as sigChanEQsigMaxNonCallConcurrent  
  INTEGER as sigChanEQsigOverlapSendingEnabled  
  INTEGER as sigChanEQsigOverlapReceivingEnabled  

SigChanEQsigStateEntry  
SEQUENCE    
  INTEGER as sigChanEQsigAdminState  
  INTEGER as sigChanEQsigOperationalState  
  INTEGER as sigChanEQsigUsageState  

SigChanEQsigStatsEntry  
SEQUENCE    
  Unsigned32 as sigChanEQsigTotalCallsToIf  
  Unsigned32 as sigChanEQsigTotalCallsFromIf  
  Unsigned32 as sigChanEQsigNonCallAssocSessionsToIf  
  Unsigned32 as sigChanEQsigNonCallAssocSessionsFromIf  

SigChanEQsigOperEntry  
SEQUENCE    
  Unsigned32 as sigChanEQsigActiveChannels  
  Unsigned32 as sigChanEQsigActiveVoiceChannels  
  Unsigned32 as sigChanEQsigActiveDataChannels  
  Unsigned32 as sigChanEQsigPeakActiveChannels  
  Unsigned32 as sigChanEQsigPeakActiveVoiceChannels  
  Unsigned32 as sigChanEQsigPeakActiveDataChannels  
  INTEGER as sigChanEQsigDChanStatus  

SigChanEQsigToolsEntry  
SEQUENCE    
  OCTET STRING as sigChanEQsigTracing  

SigChanEQsigEQsigSpecificProvEntry  
SEQUENCE    
  INTEGER as sigChanEQsigMsgSegmentation  
  INTEGER as sigChanEQsigE1ChannelNumbers  

SigChanEQsigEQsigSpecificOpEntry  
SEQUENCE    
  Unsigned32 as sigChanEQsigSegmentationAccepted  
  Unsigned32 as sigChanEQsigSegmentationFailed  

SigChanEQsigFramerRowStatusEntry  
SEQUENCE    
  RowStatus as sigChanEQsigFramerRowStatus  
  DisplayString as sigChanEQsigFramerComponentName  
  StorageType as sigChanEQsigFramerStorageType  
  NonReplicated as sigChanEQsigFramerIndex  

SigChanEQsigFramerProvEntry  
SEQUENCE    
  Link as sigChanEQsigFramerInterfaceName  

SigChanEQsigFramerStateEntry  
SEQUENCE    
  INTEGER as sigChanEQsigFramerAdminState  
  INTEGER as sigChanEQsigFramerOperationalState  
  INTEGER as sigChanEQsigFramerUsageState  

SigChanEQsigFramerStatsEntry  
SEQUENCE    
  Unsigned32 as sigChanEQsigFramerFrmToIf  
  Unsigned32 as sigChanEQsigFramerFrmFromIf  
  Unsigned32 as sigChanEQsigFramerOctetFromIf  
  Unsigned32 as sigChanEQsigFramerAborts  
  Unsigned32 as sigChanEQsigFramerCrcErrors  
  Unsigned32 as sigChanEQsigFramerLrcErrors  
  Unsigned32 as sigChanEQsigFramerNonOctetErrors  
  Unsigned32 as sigChanEQsigFramerOverruns  
  Unsigned32 as sigChanEQsigFramerUnderruns  
  Unsigned32 as sigChanEQsigFramerLargeFrmErrors