Nortel-Magellan-Passport-VnetEuroIsdnMIB

File: Nortel-Magellan-Passport-VnetEuroIsdnMIB.mib (42766 bytes)

Imported modules

RFC-1212 Nortel-Magellan-Passport-UsefulDefinitionsMIB Nortel-Magellan-Passport-StandardTextualConventionsMIB
Nortel-Magellan-Passport-TextualConventionsMIB Nortel-Magellan-Passport-VoiceNetworkingMIB

Imported symbols

OBJECT-TYPE passportMIBs Counter32
DisplayString StorageType RowStatus
Gauge32 Unsigned32 NonReplicated
Link sigChanIndex sigChan

Defined Objects

sigChanEIsdn 1.3.6.1.4.1.562.2.4.1.115.14
OBJECT IDENTIFIER    

sigChanEIsdnRowStatusTable 1.3.6.1.4.1.562.2.4.1.115.14.1
This entry controls the addition and deletion of sigChanEIsdn components.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanEIsdnRowStatusEntry

sigChanEIsdnRowStatusEntry 1.3.6.1.4.1.562.2.4.1.115.14.1.1
A single entry in the table represents a single sigChanEIsdn component.
OBJECT-TYPE    
  SigChanEIsdnRowStatusEntry  

sigChanEIsdnRowStatus 1.3.6.1.4.1.562.2.4.1.115.14.1.1.1
This variable is used as the basis for SNMP naming of sigChanEIsdn components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

sigChanEIsdnComponentName 1.3.6.1.4.1.562.2.4.1.115.14.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

sigChanEIsdnStorageType 1.3.6.1.4.1.562.2.4.1.115.14.1.1.4
This variable represents the storage type value for the sigChanEIsdn tables.
OBJECT-TYPE    
  StorageType  

sigChanEIsdnIndex 1.3.6.1.4.1.562.2.4.1.115.14.1.1.10
This variable represents the index for the sigChanEIsdn tables.
OBJECT-TYPE    
  NonReplicated  

sigChanEIsdnFramer 1.3.6.1.4.1.562.2.4.1.115.14.2
OBJECT IDENTIFIER    

sigChanEIsdnFramerRowStatusTable 1.3.6.1.4.1.562.2.4.1.115.14.2.1
This entry controls the addition and deletion of sigChanEIsdnFramer components.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanEIsdnFramerRowStatusEntry

sigChanEIsdnFramerRowStatusEntry 1.3.6.1.4.1.562.2.4.1.115.14.2.1.1
A single entry in the table represents a single sigChanEIsdnFramer component.
OBJECT-TYPE    
  SigChanEIsdnFramerRowStatusEntry  

sigChanEIsdnFramerRowStatus 1.3.6.1.4.1.562.2.4.1.115.14.2.1.1.1
This variable is used as the basis for SNMP naming of sigChanEIsdnFramer components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

sigChanEIsdnFramerComponentName 1.3.6.1.4.1.562.2.4.1.115.14.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

sigChanEIsdnFramerStorageType 1.3.6.1.4.1.562.2.4.1.115.14.2.1.1.4
This variable represents the storage type value for the sigChanEIsdnFramer tables.
OBJECT-TYPE    
  StorageType  

sigChanEIsdnFramerIndex 1.3.6.1.4.1.562.2.4.1.115.14.2.1.1.10
This variable represents the index for the sigChanEIsdnFramer tables.
OBJECT-TYPE    
  NonReplicated  

sigChanEIsdnFramerProvTable 1.3.6.1.4.1.562.2.4.1.115.14.2.10
This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanEIsdnFramerProvEntry

sigChanEIsdnFramerProvEntry 1.3.6.1.4.1.562.2.4.1.115.14.2.10.1
An entry in the sigChanEIsdnFramerProvTable.
OBJECT-TYPE    
  SigChanEIsdnFramerProvEntry  

sigChanEIsdnFramerInterfaceName 1.3.6.1.4.1.562.2.4.1.115.14.2.10.1.1
This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run.
OBJECT-TYPE    
  Link  

sigChanEIsdnFramerStateTable 1.3.6.1.4.1.562.2.4.1.115.14.2.12
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanEIsdnFramerStateEntry

sigChanEIsdnFramerStateEntry 1.3.6.1.4.1.562.2.4.1.115.14.2.12.1
An entry in the sigChanEIsdnFramerStateTable.
OBJECT-TYPE    
  SigChanEIsdnFramerStateEntry  

sigChanEIsdnFramerAdminState 1.3.6.1.4.1.562.2.4.1.115.14.2.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

sigChanEIsdnFramerOperationalState 1.3.6.1.4.1.562.2.4.1.115.14.2.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

sigChanEIsdnFramerUsageState 1.3.6.1.4.1.562.2.4.1.115.14.2.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

sigChanEIsdnFramerStatsTable 1.3.6.1.4.1.562.2.4.1.115.14.2.13
This group contains the operational statistics data for a Framer component.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanEIsdnFramerStatsEntry

sigChanEIsdnFramerStatsEntry 1.3.6.1.4.1.562.2.4.1.115.14.2.13.1
An entry in the sigChanEIsdnFramerStatsTable.
OBJECT-TYPE    
  SigChanEIsdnFramerStatsEntry  

sigChanEIsdnFramerFrmToIf 1.3.6.1.4.1.562.2.4.1.115.14.2.13.1.1
This attribute counts the number of frames transmitted to the link interface by the Framer. This count wraps to zero after exceeding its maximum value.
OBJECT-TYPE    
  Counter32  

sigChanEIsdnFramerFrmFromIf 1.3.6.1.4.1.562.2.4.1.115.14.2.13.1.2
This attribute counts the number of frames received from the link interface by the Framer. This count wraps to zero after exceeding its maximum value.
OBJECT-TYPE    
  Counter32  

sigChanEIsdnFramerOctetFromIf 1.3.6.1.4.1.562.2.4.1.115.14.2.13.1.3
This attribute counts the number of bytes received from the link interface by the Framer. This count wraps to zero after exceeding its maximum value.
OBJECT-TYPE    
  Counter32  

sigChanEIsdnFramerAborts 1.3.6.1.4.1.562.2.4.1.115.14.2.13.1.4
This attribute counts the total number of aborts received. This count wraps to zero after exceeding its maximum value.
OBJECT-TYPE    
  Counter32  

sigChanEIsdnFramerCrcErrors 1.3.6.1.4.1.562.2.4.1.115.14.2.13.1.5
This attribute counts the total number of frames with CRC errors. This count wraps to zero after exceeding its maximum value.
OBJECT-TYPE    
  Counter32  

sigChanEIsdnFramerLrcErrors 1.3.6.1.4.1.562.2.4.1.115.14.2.13.1.6
This attribute counts the total number of frames with LRC errors. This count wraps to zero after exceeding its maximum value.
OBJECT-TYPE    
  Counter32  

sigChanEIsdnFramerNonOctetErrors 1.3.6.1.4.1.562.2.4.1.115.14.2.13.1.7
This attribute counts the total number of frames that were non octet aligned. This count wraps to zero after exceeding its maximum value.
OBJECT-TYPE    
  Counter32  

sigChanEIsdnFramerOverruns 1.3.6.1.4.1.562.2.4.1.115.14.2.13.1.8
This attribute counts the total number of frames received from the link for which overruns occurred. This count wraps to zero after exceeding its maximum value.
OBJECT-TYPE    
  Counter32  

sigChanEIsdnFramerUnderruns 1.3.6.1.4.1.562.2.4.1.115.14.2.13.1.9
This attribute counts the total number of frames transmitted to the link for which underruns occurred. This count wraps to zero after exceeding its maximum value.
OBJECT-TYPE    
  Counter32  

sigChanEIsdnFramerLargeFrmErrors 1.3.6.1.4.1.562.2.4.1.115.14.2.13.1.10
This attribute counts the total number of frames received which were too large (longer than 500 bytes). This count wraps to zero after exceeding its maximum value.
OBJECT-TYPE    
  Counter32  

sigChanEIsdnL2Table 1.3.6.1.4.1.562.2.4.1.115.14.11
This group specifies the provisionable layer 2 attributes of the Euro ISDN (ETSI-T) protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanEIsdnL2Entry

sigChanEIsdnL2Entry 1.3.6.1.4.1.562.2.4.1.115.14.11.1
An entry in the sigChanEIsdnL2Table.
OBJECT-TYPE    
  SigChanEIsdnL2Entry  

sigChanEIsdnT23 1.3.6.1.4.1.562.2.4.1.115.14.11.1.1
This attribute specifies duration of the layer 2 enable request timer.
OBJECT-TYPE    
  Unsigned32 1..15  

sigChanEIsdnT200 1.3.6.1.4.1.562.2.4.1.115.14.11.1.2
This attribute specifies the maximum elapsed time between a layer 2 frame and its acknowledgment.
OBJECT-TYPE    
  Unsigned32 1..20  

sigChanEIsdnN200 1.3.6.1.4.1.562.2.4.1.115.14.11.1.3
This attribute specifies the maximum number of re-transmissions of a layer 2 frame.
OBJECT-TYPE    
  Unsigned32 1..8  

sigChanEIsdnT203 1.3.6.1.4.1.562.2.4.1.115.14.11.1.4
This attribute specifies the maximum time during which layer 2 frames may be absent. Expiry triggers a check on whether the far end is alive.
OBJECT-TYPE    
  Unsigned32 2..40  

sigChanEIsdnCircuitSwitchedK 1.3.6.1.4.1.562.2.4.1.115.14.11.1.6
This attribute specifies the maximum number of sequentially numbered I frames (that is, window size (k)) that may be unacknowledged at any given time for a SAP supporting primary rate (64kbit/sec) signalling.
OBJECT-TYPE    
  Unsigned32 1..127  

sigChanEIsdnL3Table 1.3.6.1.4.1.562.2.4.1.115.14.12
This group represents the provisionable Layer 3 timer attributes of a the Euro ISDN (ETSI-T) protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanEIsdnL3Entry

sigChanEIsdnL3Entry 1.3.6.1.4.1.562.2.4.1.115.14.12.1
An entry in the sigChanEIsdnL3Table.
OBJECT-TYPE    
  SigChanEIsdnL3Entry  

sigChanEIsdnT310 1.3.6.1.4.1.562.2.4.1.115.14.12.1.4
This attribute specifies duration of the call proceeding state timer.
OBJECT-TYPE    
  Unsigned32 10..120  

sigChanEIsdnProvTable 1.3.6.1.4.1.562.2.4.1.115.14.13
This group defines the general options of the D-channel signalling link.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanEIsdnProvEntry

sigChanEIsdnProvEntry 1.3.6.1.4.1.562.2.4.1.115.14.13.1
An entry in the sigChanEIsdnProvTable.
OBJECT-TYPE    
  SigChanEIsdnProvEntry  

sigChanEIsdnSide 1.3.6.1.4.1.562.2.4.1.115.14.13.1.1
This attribute specifies whether the interface is the network or user side of the connection. The parameter applies to both the layer 2 and layer 3 of the interface. In addition, if this attribute is set to network, then the interface is master during channel negotiation. If this attribute is set to user, then the interface is slave during channel negotiation.
OBJECT-TYPE    
  INTEGER network(1), user(2)  

sigChanEIsdnMaxNonCallConcurrent 1.3.6.1.4.1.562.2.4.1.115.14.13.1.2
This attribute specifies the maximum number of simultaneous active non call-associated sessions that are allowed. Reduction of the value does not impact NCAS sessions already in progress.
OBJECT-TYPE    
  Unsigned32 0..30  

sigChanEIsdnOverlapSending 1.3.6.1.4.1.562.2.4.1.115.14.13.1.3
This attribute specifies whether overlap sending to the PBX is enabled.
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1)  

sigChanEIsdnOverlapReceiving 1.3.6.1.4.1.562.2.4.1.115.14.13.1.4
This attribute specifies whether overlap receiving from the PBX is enabled.
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1)  

sigChanEIsdnStateTable 1.3.6.1.4.1.562.2.4.1.115.14.14
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanEIsdnStateEntry

sigChanEIsdnStateEntry 1.3.6.1.4.1.562.2.4.1.115.14.14.1
An entry in the sigChanEIsdnStateTable.
OBJECT-TYPE    
  SigChanEIsdnStateEntry  

sigChanEIsdnAdminState 1.3.6.1.4.1.562.2.4.1.115.14.14.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

sigChanEIsdnOperationalState 1.3.6.1.4.1.562.2.4.1.115.14.14.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

sigChanEIsdnUsageState 1.3.6.1.4.1.562.2.4.1.115.14.14.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

sigChanEIsdnStatsTable 1.3.6.1.4.1.562.2.4.1.115.14.15
This group provides the statistical attributes for the SigChan/x EuroIsdn component.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanEIsdnStatsEntry

sigChanEIsdnStatsEntry 1.3.6.1.4.1.562.2.4.1.115.14.15.1
An entry in the sigChanEIsdnStatsTable.
OBJECT-TYPE    
  SigChanEIsdnStatsEntry  

sigChanEIsdnTotalCallsToIf 1.3.6.1.4.1.562.2.4.1.115.14.15.1.2
This attribute counts the total number of calls that have been made to the interface. The value wraps to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

sigChanEIsdnTotalCallsFromIf 1.3.6.1.4.1.562.2.4.1.115.14.15.1.3
This attribute counts the total number of calls that have been made from the interface. The value wraps to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

sigChanEIsdnNonCallAssocSessionsToIf 1.3.6.1.4.1.562.2.4.1.115.14.15.1.4
This attribute counts the total number of non call-associated sessions that have been made to the interface. The value wraps to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

sigChanEIsdnNonCallAssocSessionsFromIf 1.3.6.1.4.1.562.2.4.1.115.14.15.1.5
This attribute counts the total number of non call-associated sessions that have been made from the interface. The value wraps to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

sigChanEIsdnOperTable 1.3.6.1.4.1.562.2.4.1.115.14.16
This group provides the operational attributes for the SigChan/x EuroIsdn component.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanEIsdnOperEntry

sigChanEIsdnOperEntry 1.3.6.1.4.1.562.2.4.1.115.14.16.1
An entry in the sigChanEIsdnOperTable.
OBJECT-TYPE    
  SigChanEIsdnOperEntry  

sigChanEIsdnActiveChannels 1.3.6.1.4.1.562.2.4.1.115.14.16.1.1
This attribute indicates the number of currently active channels. This includes channels used by both, data and voice calls.
OBJECT-TYPE    
  Gauge32 0..128  

sigChanEIsdnActiveVoiceChannels 1.3.6.1.4.1.562.2.4.1.115.14.16.1.2
This attribute indicates the number of channels that are currently used by voice calls. This includes modem calls.
OBJECT-TYPE    
  Gauge32 0..128  

sigChanEIsdnActiveDataChannels 1.3.6.1.4.1.562.2.4.1.115.14.16.1.3
This attribute indicates the number of channels that are currently used by data calls. This does not include modem data.
OBJECT-TYPE    
  Gauge32 0..128  

sigChanEIsdnPeakActiveChannels 1.3.6.1.4.1.562.2.4.1.115.14.16.1.4
This attribute indicates the maximum value of the activeChannels attribute during the last polling period.
OBJECT-TYPE    
  Gauge32 0..128  

sigChanEIsdnPeakActiveVoiceChannels 1.3.6.1.4.1.562.2.4.1.115.14.16.1.5
This attribute indicates the maximum value of the activeVoiceChannels attribute during the last polling period.
OBJECT-TYPE    
  Gauge32 0..128  

sigChanEIsdnPeakActiveDataChannels 1.3.6.1.4.1.562.2.4.1.115.14.16.1.6
This attribute indicates the maximum value of the activeDataChannels attribute during the last polling period.
OBJECT-TYPE    
  Gauge32 0..128  

sigChanEIsdnDChanStatus 1.3.6.1.4.1.562.2.4.1.115.14.16.1.7
This attribute indicates the state of the D-channel. outOfService means that there is no layer 2 or layer 3 connectivity to the PBX. establishing means that the signalling channel is attempting to stage the layer 2. established means that the layer 2 is enabled. If the signalling channel stays in the established state, then it is waiting for a restart from the PBX. enabling means that the resources for processing calls are being initialized. If the signalling channel stays in the enabling state then it is waiting for a restart acknowledgment from the PBX. inService means that the resources for processing calls are available. restarting means that the resources for call processing are being initialized.
OBJECT-TYPE    
  INTEGER outOfService(0), establishing(1), established(2), enabling(3), inService(4), restarting(5)  

sigChanEIsdnToolsTable 1.3.6.1.4.1.562.2.4.1.115.14.17
This contains a series of operational attributes which turn on and off several kinds of tracing.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanEIsdnToolsEntry

sigChanEIsdnToolsEntry 1.3.6.1.4.1.562.2.4.1.115.14.17.1
An entry in the sigChanEIsdnToolsTable.
OBJECT-TYPE    
  SigChanEIsdnToolsEntry  

sigChanEIsdnTracing 1.3.6.1.4.1.562.2.4.1.115.14.17.1.1
This attribute defines which types of tracing are active on the signalling channel. The tracing messages are sent to the debug stream. To see the messages the agentQueueSize attribute of the Lp/x Eng Ds/debug component must be greater than 0 and the operator's NMIS session must have the debug stream included in its data stream list (for example: set Nmis Telnet Session/1 dataStreams deb). Several types of tracing can be enabled simultaneously. Note that tracing consumes additional CPU resources and slows down call processing on a heavily loaded card. If there is message block exhaustion tracing is suspended for a period of time and then automatically re-enabled. An alarm is generated on tracing suspension and resumption. This mechanism protects the function processor against excessive numbers of tracing messages. Types of tracing include: protocolErrors - get details of any protocol errors which are occurring. Protocol errors are also reported in summary form as alarms. q931Summary - summary of the Q.931 messages on the signalling link. q931Hex - Q.931 messages displayed in hex format. Useful to determine protocol compliance in case of errors reported on local or remote ends. q931Symbolic - Q.931 messages parsed to give maximum detail. Useful for understanding content of messages flowing on the link. portHex - Q.921 messages in hex format being sent and received on the link. Description of bits: protocolErrors(0) q931Summary(1) q931Hex(2) q931Symbolic(3) portHex(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

sigChanEIsdnOptTable 1.3.6.1.4.1.562.2.4.1.115.14.18
This group specifies the provisionable attributes specific to the Euro ISDN (ETSI-T) protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanEIsdnOptEntry

sigChanEIsdnOptEntry 1.3.6.1.4.1.562.2.4.1.115.14.18.1
An entry in the sigChanEIsdnOptTable.
OBJECT-TYPE    
  SigChanEIsdnOptEntry  

sigChanEIsdnVariant 1.3.6.1.4.1.562.2.4.1.115.14.18.1.1
This attribute specifies the specific variant of the Euro ISDN (ETSI- T) protocol. Supported variants are: etsiGeneric - provides generic ETSI-T protocol. Only proxy of the NETWORK side of the protocol is implemented, austria - provides ETSI-T protocol variant as per the Austrian national specification. Only the USER side of the protocol is implemented, germany - provides ETSI-T protocol variant as per the German national specification. Only the USER side of the protocol is implemented.
OBJECT-TYPE    
  INTEGER etsiGeneric(0), austria(1), germany(2)  

sigChanEIsdnConnectServiceTimer 1.3.6.1.4.1.562.2.4.1.115.14.18.1.2
This attribute specifies duration of the 'await connection' supervisory timer which applies to non call-associated sessions providing bearer-independent connection-oriented transport for supplementary services. The timer is started at the ingress Passport when a REGISTER message is received from the source PBX and stopped when a virtual circuit with the egress Passport is established. If the timer expires, the non call-associated session is cleared. The 'await connection' timer (attribute connectServiceTimer) together with 'await response' timer (attribute responseServiceTimer) provide equivalent of the T-ACTIVATE timer described in the relevant supplementary service specifications. A change of the timer value does not apply to timers already running.
OBJECT-TYPE    
  Unsigned32 1..10  

sigChanEIsdnResponseServiceTimer 1.3.6.1.4.1.562.2.4.1.115.14.18.1.3
This attribute specifies duration of the 'await response' supervisory timer which applies to non call-associated sessions providing bearer-independent connection-oriented transport for supplementary services. The timer is started at the ingress Passport when creation of a virtual circuit with the egress Passport is confirmed and stopped when the first message from the destination PBX is received. If the timer expires, the non call-associated session is cleared. The 'await connection' timer (attribute connectServiceTimer) together with 'await response' timer (attribute responseServiceTimer) provide equivalent of the T-ACTIVATE timer described in the relevant supplementary service specifications. A change of the timer value does not apply to timers already running.
OBJECT-TYPE    
  Unsigned32 1..10  

sigChanEIsdnLifetimeServiceTimer 1.3.6.1.4.1.562.2.4.1.115.14.18.1.4
This attribute specifies duration of the service lifetime supervisory timer which applies to non call-associated sessions providing bearer-independent connection-oriented transport for supplementary services. The timer limits the duration of a virtual call. It is started at the ingress Passport at the moment the first response message from the destination PBX has been received and stopped when the non call-associated session is released. If the timer expires, the non call-associated session is cleared. This timer is equivalent to the T-CCBS6 timer described in the relevant supplementary service specifications. A change of the timer value does not apply to timers already running.
OBJECT-TYPE    
  Unsigned32 1..200  

vnetEuroIsdnMIB 1.3.6.1.4.1.562.2.4.2.138
OBJECT IDENTIFIER    

vnetEuroIsdnGroup 1.3.6.1.4.1.562.2.4.2.138.1
OBJECT IDENTIFIER    

vnetEuroIsdnGroupBE 1.3.6.1.4.1.562.2.4.2.138.1.5
OBJECT IDENTIFIER    

vnetEuroIsdnGroupBE01 1.3.6.1.4.1.562.2.4.2.138.1.5.2
OBJECT IDENTIFIER    

vnetEuroIsdnGroupBE01A 1.3.6.1.4.1.562.2.4.2.138.1.5.2.2
OBJECT IDENTIFIER    

vnetEuroIsdnCapabilities 1.3.6.1.4.1.562.2.4.2.138.3
OBJECT IDENTIFIER    

vnetEuroIsdnCapabilitiesBE 1.3.6.1.4.1.562.2.4.2.138.3.5
OBJECT IDENTIFIER    

vnetEuroIsdnCapabilitiesBE01 1.3.6.1.4.1.562.2.4.2.138.3.5.2
OBJECT IDENTIFIER    

vnetEuroIsdnCapabilitiesBE01A 1.3.6.1.4.1.562.2.4.2.138.3.5.2.2
OBJECT IDENTIFIER    

Defined Objects

SigChanEIsdnRowStatusEntry  
SEQUENCE    
  RowStatus as sigChanEIsdnRowStatus  
  DisplayString as sigChanEIsdnComponentName  
  StorageType as sigChanEIsdnStorageType  
  NonReplicated as sigChanEIsdnIndex  

SigChanEIsdnL2Entry  
SEQUENCE    
  Unsigned32 as sigChanEIsdnT23  
  Unsigned32 as sigChanEIsdnT200  
  Unsigned32 as sigChanEIsdnN200  
  Unsigned32 as sigChanEIsdnT203  
  Unsigned32 as sigChanEIsdnCircuitSwitchedK  

SigChanEIsdnL3Entry  
SEQUENCE    
  Unsigned32 as sigChanEIsdnT310  

SigChanEIsdnProvEntry  
SEQUENCE    
  INTEGER as sigChanEIsdnSide  
  Unsigned32 as sigChanEIsdnMaxNonCallConcurrent  
  INTEGER as sigChanEIsdnOverlapSending  
  INTEGER as sigChanEIsdnOverlapReceiving  

SigChanEIsdnStateEntry  
SEQUENCE    
  INTEGER as sigChanEIsdnAdminState  
  INTEGER as sigChanEIsdnOperationalState  
  INTEGER as sigChanEIsdnUsageState  

SigChanEIsdnStatsEntry  
SEQUENCE    
  Counter32 as sigChanEIsdnTotalCallsToIf  
  Counter32 as sigChanEIsdnTotalCallsFromIf  
  Counter32 as sigChanEIsdnNonCallAssocSessionsToIf  
  Counter32 as sigChanEIsdnNonCallAssocSessionsFromIf  

SigChanEIsdnOperEntry  
SEQUENCE    
  Gauge32 as sigChanEIsdnActiveChannels  
  Gauge32 as sigChanEIsdnActiveVoiceChannels  
  Gauge32 as sigChanEIsdnActiveDataChannels  
  Gauge32 as sigChanEIsdnPeakActiveChannels  
  Gauge32 as sigChanEIsdnPeakActiveVoiceChannels  
  Gauge32 as sigChanEIsdnPeakActiveDataChannels  
  INTEGER as sigChanEIsdnDChanStatus  

SigChanEIsdnToolsEntry  
SEQUENCE    
  OCTET STRING as sigChanEIsdnTracing  

SigChanEIsdnOptEntry  
SEQUENCE    
  INTEGER as sigChanEIsdnVariant  
  Unsigned32 as sigChanEIsdnConnectServiceTimer  
  Unsigned32 as sigChanEIsdnResponseServiceTimer  
  Unsigned32 as sigChanEIsdnLifetimeServiceTimer  

SigChanEIsdnFramerRowStatusEntry  
SEQUENCE    
  RowStatus as sigChanEIsdnFramerRowStatus  
  DisplayString as sigChanEIsdnFramerComponentName  
  StorageType as sigChanEIsdnFramerStorageType  
  NonReplicated as sigChanEIsdnFramerIndex  

SigChanEIsdnFramerProvEntry  
SEQUENCE    
  Link as sigChanEIsdnFramerInterfaceName  

SigChanEIsdnFramerStateEntry  
SEQUENCE    
  INTEGER as sigChanEIsdnFramerAdminState  
  INTEGER as sigChanEIsdnFramerOperationalState  
  INTEGER as sigChanEIsdnFramerUsageState  

SigChanEIsdnFramerStatsEntry  
SEQUENCE    
  Counter32 as sigChanEIsdnFramerFrmToIf  
  Counter32 as sigChanEIsdnFramerFrmFromIf  
  Counter32 as sigChanEIsdnFramerOctetFromIf  
  Counter32 as sigChanEIsdnFramerAborts  
  Counter32 as sigChanEIsdnFramerCrcErrors  
  Counter32 as sigChanEIsdnFramerLrcErrors  
  Counter32 as sigChanEIsdnFramerNonOctetErrors  
  Counter32 as sigChanEIsdnFramerOverruns  
  Counter32 as sigChanEIsdnFramerUnderruns  
  Counter32 as sigChanEIsdnFramerLargeFrmErrors