Nortel-Magellan-Passport-VnetMcdnSigMIB

File: Nortel-Magellan-Passport-VnetMcdnSigMIB.mib (53451 bytes)

Imported modules

RFC-1212 Nortel-Magellan-Passport-UsefulDefinitionsMIB Nortel-Magellan-Passport-StandardTextualConventionsMIB
Nortel-Magellan-Passport-TextualConventionsMIB Nortel-Magellan-Passport-VoiceNetworkingMIB

Imported symbols

OBJECT-TYPE passportMIBs Counter32
DisplayString StorageType RowStatus
Unsigned32 NonReplicated Link
sigChanIndex sigChan

Defined Objects

sigChanMcdn 1.3.6.1.4.1.562.2.4.1.115.17
OBJECT IDENTIFIER    

sigChanMcdnRowStatusTable 1.3.6.1.4.1.562.2.4.1.115.17.1
This entry controls the addition and deletion of sigChanMcdn components.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanMcdnRowStatusEntry

sigChanMcdnRowStatusEntry 1.3.6.1.4.1.562.2.4.1.115.17.1.1
A single entry in the table represents a single sigChanMcdn component.
OBJECT-TYPE    
  SigChanMcdnRowStatusEntry  

sigChanMcdnRowStatus 1.3.6.1.4.1.562.2.4.1.115.17.1.1.1
This variable is used as the basis for SNMP naming of sigChanMcdn components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

sigChanMcdnComponentName 1.3.6.1.4.1.562.2.4.1.115.17.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

sigChanMcdnStorageType 1.3.6.1.4.1.562.2.4.1.115.17.1.1.4
This variable represents the storage type value for the sigChanMcdn tables.
OBJECT-TYPE    
  StorageType  

sigChanMcdnIndex 1.3.6.1.4.1.562.2.4.1.115.17.1.1.10
This variable represents the index for the sigChanMcdn tables.
OBJECT-TYPE    
  NonReplicated  

sigChanMcdnFramer 1.3.6.1.4.1.562.2.4.1.115.17.2
OBJECT IDENTIFIER    

sigChanMcdnFramerRowStatusTable 1.3.6.1.4.1.562.2.4.1.115.17.2.1
This entry controls the addition and deletion of sigChanMcdnFramer components.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanMcdnFramerRowStatusEntry

sigChanMcdnFramerRowStatusEntry 1.3.6.1.4.1.562.2.4.1.115.17.2.1.1
A single entry in the table represents a single sigChanMcdnFramer component.
OBJECT-TYPE    
  SigChanMcdnFramerRowStatusEntry  

sigChanMcdnFramerRowStatus 1.3.6.1.4.1.562.2.4.1.115.17.2.1.1.1
This variable is used as the basis for SNMP naming of sigChanMcdnFramer components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

sigChanMcdnFramerComponentName 1.3.6.1.4.1.562.2.4.1.115.17.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

sigChanMcdnFramerStorageType 1.3.6.1.4.1.562.2.4.1.115.17.2.1.1.4
This variable represents the storage type value for the sigChanMcdnFramer tables.
OBJECT-TYPE    
  StorageType  

sigChanMcdnFramerIndex 1.3.6.1.4.1.562.2.4.1.115.17.2.1.1.10
This variable represents the index for the sigChanMcdnFramer tables.
OBJECT-TYPE    
  NonReplicated  

sigChanMcdnFramerProvTable 1.3.6.1.4.1.562.2.4.1.115.17.2.10
This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanMcdnFramerProvEntry

sigChanMcdnFramerProvEntry 1.3.6.1.4.1.562.2.4.1.115.17.2.10.1
An entry in the sigChanMcdnFramerProvTable.
OBJECT-TYPE    
  SigChanMcdnFramerProvEntry  

sigChanMcdnFramerInterfaceName 1.3.6.1.4.1.562.2.4.1.115.17.2.10.1.1
This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run.
OBJECT-TYPE    
  Link  

sigChanMcdnFramerStateTable 1.3.6.1.4.1.562.2.4.1.115.17.2.12
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanMcdnFramerStateEntry

sigChanMcdnFramerStateEntry 1.3.6.1.4.1.562.2.4.1.115.17.2.12.1
An entry in the sigChanMcdnFramerStateTable.
OBJECT-TYPE    
  SigChanMcdnFramerStateEntry  

sigChanMcdnFramerAdminState 1.3.6.1.4.1.562.2.4.1.115.17.2.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

sigChanMcdnFramerOperationalState 1.3.6.1.4.1.562.2.4.1.115.17.2.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

sigChanMcdnFramerUsageState 1.3.6.1.4.1.562.2.4.1.115.17.2.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

sigChanMcdnFramerStatsTable 1.3.6.1.4.1.562.2.4.1.115.17.2.13
This group contains the operational statistics data for a Framer component.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanMcdnFramerStatsEntry

sigChanMcdnFramerStatsEntry 1.3.6.1.4.1.562.2.4.1.115.17.2.13.1
An entry in the sigChanMcdnFramerStatsTable.
OBJECT-TYPE    
  SigChanMcdnFramerStatsEntry  

sigChanMcdnFramerFrmToIf 1.3.6.1.4.1.562.2.4.1.115.17.2.13.1.1
This attribute counts the number of frames transmitted to the link interface by Framer. This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Counter32  

sigChanMcdnFramerFrmFromIf 1.3.6.1.4.1.562.2.4.1.115.17.2.13.1.2
This attribute counts the number of frames received from the link interface by Framer. This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Counter32  

sigChanMcdnFramerOctetFromIf 1.3.6.1.4.1.562.2.4.1.115.17.2.13.1.3
This attribute counts the number of bytes received from the link interface by Framer. This count wraps to zero when it exceeds its maximum value.
OBJECT-TYPE    
  Counter32  

sigChanMcdnFramerAborts 1.3.6.1.4.1.562.2.4.1.115.17.2.13.1.4
This attribute counts the total number of aborts received. This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Counter32  

sigChanMcdnFramerCrcErrors 1.3.6.1.4.1.562.2.4.1.115.17.2.13.1.5
This attribute counts the total number of frames with CRC errors. This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Counter32  

sigChanMcdnFramerLrcErrors 1.3.6.1.4.1.562.2.4.1.115.17.2.13.1.6
This attribute counts the total number of frames with LRC errors. This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Counter32  

sigChanMcdnFramerNonOctetErrors 1.3.6.1.4.1.562.2.4.1.115.17.2.13.1.7
This attribute counts the total number of frames that were non octet aligned. This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Counter32  

sigChanMcdnFramerOverruns 1.3.6.1.4.1.562.2.4.1.115.17.2.13.1.8
This attribute counts the total number of frames received from the link for which overruns occurred. This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Counter32  

sigChanMcdnFramerUnderruns 1.3.6.1.4.1.562.2.4.1.115.17.2.13.1.9
This attribute counts the total number of frames transmitted to the link for which underruns occurred. This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Counter32  

sigChanMcdnFramerLargeFrmErrors 1.3.6.1.4.1.562.2.4.1.115.17.2.13.1.10
This attribute counts the total number of frames received which were too large (longer than 500 bytes). This count wraps to zero after reaching its maximum value.
OBJECT-TYPE    
  Counter32  

sigChanMcdnL2Table 1.3.6.1.4.1.562.2.4.1.115.17.11
This group specifies the provisionable layer 2 attributes of the Q.931 ITU-T protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanMcdnL2Entry

sigChanMcdnL2Entry 1.3.6.1.4.1.562.2.4.1.115.17.11.1
An entry in the sigChanMcdnL2Table.
OBJECT-TYPE    
  SigChanMcdnL2Entry  

sigChanMcdnT23 1.3.6.1.4.1.562.2.4.1.115.17.11.1.1
This attribute specifies the layer 2 enable request timer.
OBJECT-TYPE    
  Unsigned32 1..15  

sigChanMcdnT200 1.3.6.1.4.1.562.2.4.1.115.17.11.1.2
This attribute specifies the maximum time between a layer 2 frame and its acknowledgment.
OBJECT-TYPE    
  Unsigned32 1..20  

sigChanMcdnN200 1.3.6.1.4.1.562.2.4.1.115.17.11.1.3
This attribute specifies the maximum number of re-transmissions of a layer 2 frame.
OBJECT-TYPE    
  Unsigned32 1..8  

sigChanMcdnT203 1.3.6.1.4.1.562.2.4.1.115.17.11.1.4
This attribute specifies the maximum time for which layer 2 frames may be absent. Expiry triggers a check on whether the far end is alive.
OBJECT-TYPE    
  Unsigned32 2..40  

sigChanMcdnCircuitSwitchedK 1.3.6.1.4.1.562.2.4.1.115.17.11.1.6
This attribute specifies the maximum number of sequentially numbered I frames (that is, window size (k)) that may be unacknowledged at any given time for a SAP supporting primary rate (64kbit/sec) signalling.
OBJECT-TYPE    
  Unsigned32 1..127  

sigChanMcdnL3Table 1.3.6.1.4.1.562.2.4.1.115.17.12
This group represents the provisionable Layer 3 timer attributes of the MCDN signalling protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanMcdnL3Entry

sigChanMcdnL3Entry 1.3.6.1.4.1.562.2.4.1.115.17.12.1
An entry in the sigChanMcdnL3Table.
OBJECT-TYPE    
  SigChanMcdnL3Entry  

sigChanMcdnT302 1.3.6.1.4.1.562.2.4.1.115.17.12.1.1
This attribute specifies the overlap receiving timer; in a UNI, this is network to user, but for Peer to Peer it is all incoming calls. This attribute is ignored if overlap signalling is disabled.
OBJECT-TYPE    
  Unsigned32 10..30  

sigChanMcdnT304 1.3.6.1.4.1.562.2.4.1.115.17.12.1.2
This attribute specifies the overlap sending timer; in a UNI, this is user to network, but for Peer to Peer it is all outgoing calls. This attribute is ignored if overlap signalling is disabled.
OBJECT-TYPE    
  Unsigned32 10..30  

sigChanMcdnT309 1.3.6.1.4.1.562.2.4.1.115.17.12.1.3
This attribute specifies the data link disconnect timer; used to ride out temporary failures.
OBJECT-TYPE    
  Unsigned32 15..120  

sigChanMcdnT310 1.3.6.1.4.1.562.2.4.1.115.17.12.1.4
This attribute specifies the call proceeding state timer.
OBJECT-TYPE    
  Unsigned32 10..120  

sigChanMcdnT316 1.3.6.1.4.1.562.2.4.1.115.17.12.1.5
This attribute specifies the restart request response timer. It must be set greater than t317.
OBJECT-TYPE    
  Unsigned32 31..180  

sigChanMcdnT317 1.3.6.1.4.1.562.2.4.1.115.17.12.1.6
This attribute specifies the restart operation timer, used when a RESTART was received.
OBJECT-TYPE    
  Unsigned32 30..179  

sigChanMcdnProvTable 1.3.6.1.4.1.562.2.4.1.115.17.13
This group defines the general options of the D-channel signalling link.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanMcdnProvEntry

sigChanMcdnProvEntry 1.3.6.1.4.1.562.2.4.1.115.17.13.1
An entry in the sigChanMcdnProvTable.
OBJECT-TYPE    
  SigChanMcdnProvEntry  

sigChanMcdnSide 1.3.6.1.4.1.562.2.4.1.115.17.13.1.1
This attribute specifies whether the interface provides layer 2 and 3 services equivalent to the ITU-T network or user side of the connection. If this attribute is set to network, then the interface is master during channel negotiation, and uses network side layer 2 command/response bits. If this attribute is set to user, then the interface is slave during channel negotiation, and uses user side layer 2 command/response bits. Note that although a peer to peer protocol has no true network or user side, for channel negotiation and layer 2 handling the peer to peer and UNI protocols have identical function. A true UNI may also have uni-directional messages and/or message elements; the peer to peer has all elements bidirectional.
OBJECT-TYPE    
  INTEGER network(1), user(2)  

sigChanMcdnMaxNonCallConcurrent 1.3.6.1.4.1.562.2.4.1.115.17.13.1.2
This attribute specifies the maximum number of simultaneous active non-call transactions that are allowed.
OBJECT-TYPE    
  Unsigned32 1..30  

sigChanMcdnOverlapSending 1.3.6.1.4.1.562.2.4.1.115.17.13.1.3
This attribute specifies whether overlap sending to the PBX is enabled.
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1)  

sigChanMcdnOverlapReceiving 1.3.6.1.4.1.562.2.4.1.115.17.13.1.4
This attribute specifies whether overlap receiving from the PBX is enabled.
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1)  

sigChanMcdnChanMaintenanceHandling 1.3.6.1.4.1.562.2.4.1.115.17.13.1.5
This attribute specifies handling of channel maintenance events such as locking and unlocking a channel or channel registration on start-up. The decision here is whether to send individual channel RESTART messages, SERVICE messages, or nothing. Note that channel registration only occurs after the global interface restart at startup. The attribute controls start-up handling absolutely, and channel lock and unlock conditionally. That is, setting this to enable SERVICE messages ensures SERVICE messages at start-up and whenever a channel goes into or out of service. However, if this is not set to enable SERVICE messaging, a RESTART is always sent on unlocking a channel. globalOnStartup provides the minimum required function at start- up, without any individual channel confirmation. Note that when this is set, channel RESTART is still used for channel unlock. globalOnStartup applies to SigChan start-up only. serviceMessage enables sending and receiving SERVICE messages. If enabled, SERVICE messages are always used for channel maintenance on channel lock, channel unlock and start-up. restartMessage provides individual channel RESTARTs when a SigChan starts up. If enabled, the RESTART is used at start-up and channel unlock. However, if both SERVICE and RESTART messages are disabled, the RESTART will still be used when a channel unlocks.
OBJECT-TYPE    
  INTEGER globalOnStartup(0), serviceMessage(1), restartMessage(2)  

sigChanMcdnStateTable 1.3.6.1.4.1.562.2.4.1.115.17.14
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanMcdnStateEntry

sigChanMcdnStateEntry 1.3.6.1.4.1.562.2.4.1.115.17.14.1
An entry in the sigChanMcdnStateTable.
OBJECT-TYPE    
  SigChanMcdnStateEntry  

sigChanMcdnAdminState 1.3.6.1.4.1.562.2.4.1.115.17.14.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

sigChanMcdnOperationalState 1.3.6.1.4.1.562.2.4.1.115.17.14.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

sigChanMcdnUsageState 1.3.6.1.4.1.562.2.4.1.115.17.14.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

sigChanMcdnStatsTable 1.3.6.1.4.1.562.2.4.1.115.17.15
This group provides the operational components for the McdnSig component.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanMcdnStatsEntry

sigChanMcdnStatsEntry 1.3.6.1.4.1.562.2.4.1.115.17.15.1
An entry in the sigChanMcdnStatsTable.
OBJECT-TYPE    
  SigChanMcdnStatsEntry  

sigChanMcdnTotalCallsToIf 1.3.6.1.4.1.562.2.4.1.115.17.15.1.2
This attribute counts the total number of calls that have been made to the interface. The value wraps when it reaches its maximum.
OBJECT-TYPE    
  Counter32  

sigChanMcdnTotalCallsFromIf 1.3.6.1.4.1.562.2.4.1.115.17.15.1.3
This attribute counts the total number of calls from the interface. The value wraps when it reaches its maximum.
OBJECT-TYPE    
  Counter32  

sigChanMcdnNonCallAssocSessionsToIf 1.3.6.1.4.1.562.2.4.1.115.17.15.1.4
This attribute counts the total number of non-call associated sessions to the interface. The value wraps when it reaches its maximum.
OBJECT-TYPE    
  Counter32  

sigChanMcdnNonCallAssocSessionsFromIf 1.3.6.1.4.1.562.2.4.1.115.17.15.1.5
This attribute counts the total number of non-call associated sessions from the interface. The value wraps when it reaches its maximum.
OBJECT-TYPE    
  Counter32  

sigChanMcdnOperTable 1.3.6.1.4.1.562.2.4.1.115.17.16
This group provides the operational attributes for the MCDN signalling.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanMcdnOperEntry

sigChanMcdnOperEntry 1.3.6.1.4.1.562.2.4.1.115.17.16.1
An entry in the sigChanMcdnOperTable.
OBJECT-TYPE    
  SigChanMcdnOperEntry  

sigChanMcdnActiveChannels 1.3.6.1.4.1.562.2.4.1.115.17.16.1.1
This attribute indicates the number of currently active channels. This includes data and voice channels.
OBJECT-TYPE    
  Unsigned32 0..128  

sigChanMcdnActiveVoiceChannels 1.3.6.1.4.1.562.2.4.1.115.17.16.1.2
This attribute indicates the number of channels that are currently carrying voice.
OBJECT-TYPE    
  Unsigned32 0..128  

sigChanMcdnActiveDataChannels 1.3.6.1.4.1.562.2.4.1.115.17.16.1.3
This attribute indicates the number of channels that are currently carrying data. This does not include modem data.
OBJECT-TYPE    
  Unsigned32 0..128  

sigChanMcdnPeakActiveChannels 1.3.6.1.4.1.562.2.4.1.115.17.16.1.4
This attribute indicates the maximum number of channels that have been active on this signalling channel during the last polling period.
OBJECT-TYPE    
  Unsigned32 0..128  

sigChanMcdnPeakActiveVoiceChannels 1.3.6.1.4.1.562.2.4.1.115.17.16.1.5
This attribute indicates the maximum number of voice channels that have been active on this signalling channel during the last polling period.
OBJECT-TYPE    
  Unsigned32 0..128  

sigChanMcdnPeakActiveDataChannels 1.3.6.1.4.1.562.2.4.1.115.17.16.1.6
This attribute indicates the maximum number of data channels that have been active on this signalling channel during the last polling period.
OBJECT-TYPE    
  Unsigned32 0..128  

sigChanMcdnDChanStatus 1.3.6.1.4.1.562.2.4.1.115.17.16.1.7
This attribute indicates the state of the D-channel. outOfService means that there is no layer 2 or layer 3 connectivity to the PBX. establishing means that the signalling channel is attempting to stage the layer 2. established means that the layer 2 is enabled. If the signalling channel stays in the established state, then it is waiting for a restart from the PBX. enabling means that the resources for processing calls are being initialized. If the signalling channel stays in the enabling state then it is waiting for a restart acknowledgement from the PBX. inService means that the resources for processing calls are available. restarting means that the resources for call processing are being rei- initialized.
OBJECT-TYPE    
  INTEGER outOfService(0), establishing(1), established(2), enabling(3), inService(4), restarting(5)  

sigChanMcdnToolsTable 1.3.6.1.4.1.562.2.4.1.115.17.17
This contains a series of operational attributes which turn on and off several kinds of tracing.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanMcdnToolsEntry

sigChanMcdnToolsEntry 1.3.6.1.4.1.562.2.4.1.115.17.17.1
An entry in the sigChanMcdnToolsTable.
OBJECT-TYPE    
  SigChanMcdnToolsEntry  

sigChanMcdnTracing 1.3.6.1.4.1.562.2.4.1.115.17.17.1.1
This attribute defines which types of tracing are active for this signalling channel. The tracing messages are sent to the debug stream. To see the messages the agentQueue attribute in Col/debug must be greater than 0 and a Telnet NMIS session must list the debug stream in in its data streams (ex. set nmis telnet session/1 dataStreams debug). Different types of tracing can be enabled simultaneously. Note that tracing consumes additional CPU resources and will slow down call processing on a heavily loaded card. If there is message block exhaustion tracing will be suspended for a period and then automatically reenabled. An alarm is generated on tracing suspension and resumption. This mechanism protects the function processor against excessive numbers of tracing messages. Types of tracing include: protocolErrors - get details of any protocol errors which are occuring. Protocol errors are also reported in summary form as alarms. q931Summary - Summary of the Q.931 messages on the signalling link, including certain call details (calling number, called number, release codes). q931Hex - Q.931 messages displayed in hex format. Useful to determine protocol compliance in case of errors reported on local or remote ends. q931Symbolic - Q.931 messages parsed to give maximum detail. Useful for understanding content of messages flowing on the link. portHex - Messages in hex format being sent and received on the link. Description of bits: protocolErrors(0) q931Summary(1) q931Hex(2) q931Symbolic(3) portHex(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

sigChanMcdnMessageTraced 1.3.6.1.4.1.562.2.4.1.115.17.17.1.2
This attribute specifies the type of ISDN messages that are to be traced. Description of bits: alerting(0) callProceeding(1) connectionlessFacility(2) congestionControl(3) connect(4) connectAcknowledge(5) disconnect(6) facility(7) facilityAcknowledge(8) facilityReject(9) information(10) notify(11) progress(12) register(13) releaseComp(14) release(15) restart(16) restartAcknowledge(17) service(18) serviceAcknowledge(19) setup(20) setupAcknowledge(21) status(22) statusEnquiry(23) userInformation(24) all(25)
OBJECT-TYPE    
  OCTET STRING SIZE(4)  

sigChanMcdnDirectionTraced 1.3.6.1.4.1.562.2.4.1.115.17.17.1.3
This attribute indicates whether the incoming (from PBX), outgoing (to PBX), or both incoming and outgoing messages are traced. Description of bits: incoming(0) outgoing(1)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

sigChanMcdnClsTable 1.3.6.1.4.1.562.2.4.1.115.17.18
This group enables and disables the support of the MCDN proprietary signalling for connectionless features on the local signalling channel.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanMcdnClsEntry

sigChanMcdnClsEntry 1.3.6.1.4.1.562.2.4.1.115.17.18.1
An entry in the sigChanMcdnClsTable.
OBJECT-TYPE    
  SigChanMcdnClsEntry  

sigChanMcdnClsFeaturesSupported 1.3.6.1.4.1.562.2.4.1.115.17.18.1.2
This attribute specifies the features to be supported by MCDN 'TCAP' connectionless messaging. Note that some features such as Network ACD combine connectionless and connection oriented. In the NACD case, the connectionless messaging enables the source and target PBXs to establish the networked relationship, and calls sent across the network (connection oriented) will contain basic information relating the call to the feature. Feature Definitions: networkAcd: transfer of a call from a pool of agents to a second pool of agents across the network. networkMessageService: message waiting capability (for example, lamps on sets). Also includes signalling for voice mail, but is not limited to voice mail. networkVoiceMail: a specific subset of Network Message Service, separated functionally as it always terminates on an interactive voice response mailbox application. networkRingAgain: ring again to remote sets. electronicLock: change of set capabilities by a remote user dialling the applicable code and password. remoteCallForward: call forwarding a phone via applicable code and password. callPickupNetworkWide (call pickup world wide): scan for a ringing call on another node, to enable the scanning set to pick up the call. networkPackage1: a collection of other features including but not limited to network clock synchronization. Note that on the Meridian 1, this is a general purpose group used for very small features not requiring a new ISDN Facility feature type. isdnApplicationInterface: network wide support of a number of Meridian 1 Application Module Link features. mobilityMultisiteNetworking: the capability to use a wireless phone in multiple sites, by having the phone register on arrival at the new site, and having the PBX at the new site negotiate the set 'relocation' with the base PBX. miscellaneous: Any feature that is not listed above. Description of bits: networkAcd(0) networkMessageService(1) networkRingAgain(2) networkVoiceMail(3) electronicLock(4) remoteCallForward(5) callPickupWorldWide(6) networkPackage1(7) isdnApplicationInterface(8) mobilityMultisiteNetworking(9) notused10(10) notused11(11) notused12(12) notused13(13) notused14(14) miscellaneous(15)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

sigChanMcdnCoTable 1.3.6.1.4.1.562.2.4.1.115.17.19
This group enables and disables the support of the MCDN proprietary signalling for the listed features on the local signalling channel.
OBJECT-TYPE    
  SEQUENCE OF  
    SigChanMcdnCoEntry

sigChanMcdnCoEntry 1.3.6.1.4.1.562.2.4.1.115.17.19.1
An entry in the sigChanMcdnCoTable.
OBJECT-TYPE    
  SigChanMcdnCoEntry  

sigChanMcdnDropBackCongestion 1.3.6.1.4.1.562.2.4.1.115.17.19.1.1
This attribute specifies if the Meridian 1 Drop Back Congestion Handling for trunks is enabled, and what type is being supported.
OBJECT-TYPE    
  INTEGER noDropBackAllowed(0), dropBackToOriginator(1), dropBackToPriorNode(2)  

sigChanMcdnNetworkNameDisplay 1.3.6.1.4.1.562.2.4.1.115.17.19.1.4
This attribute specifies what Name Display is supported. nd1 corresponds to the Meridian 1 RCAP (Remote CAPability) nd1. This translates as caller provides name info in SETUP, ringing party name in ALERTING, redirection name in NOTIFY, and answering party name in CONNECT (as applicable, and if the name changes). nd2 corresponds to the Meridian 1 RCAP (Remote CAPability) nd2. This translates as caller provides name info in SETUP, answering party provides name in NOTIFY on answer. nd3 corresponds to the Meridian 1 RCAP (Remote CAPability) nd3, which is nd1 plus name information in call clearing messages (busy user, etc.) where a specific user was found but either could not answer or cleared the call. This corresponds to the QSIG name display. Description of bits: nameDisplay1(0) nameDisplay2(1) nameDisplay3(2)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

sigChanMcdnMultisiteBusinessGroup 1.3.6.1.4.1.562.2.4.1.115.17.19.1.7
This attribute specifies whether to enable transport for the Meridian 1 Multisite Business Group IE. The Meridian 1 allows multiple 'Tenants' to exist on a single PBX. These Tenants have limited access to each other and to system resources. That is, users associated with 'Tenant group one' cannot use trunks, attendants, and features from another group, and so forth. The Multi-Site Business Group is a single Tenant existing on more than one PBX. As an example, 'tenant one' on a PBX may 'own' resources belonging to 'tenant one' on another PBX. The Multi-Site Business Group IE as used in the Meridian 1 Network Tenant Services feature enables linking the two tenants together.
OBJECT-TYPE    
  INTEGER transport(0), discard(1)  

sigChanMcdnConOrFeaturesSupported 1.3.6.1.4.1.562.2.4.1.115.17.19.1.8
This attribute indicates the features to be supported by MCDN 'ROSE' connection oriented messaging. Feature Definitions: networkAttendantService: network wide support of Attendant ('operator') services. classOfServiceTransport: this is not a ROSE feature. Class of Service transport takes place in the called party number when provisioned on the Meridian 1 to use an ESN signalling type. trunkRouteOptimization: dropping of redundant links in a call, when a set call forwards a call prior to answer. remoteVirtualQueuing: queuing at a remote node without requiring a B channel to be kept up. offHookQueuing: Queuing by maintaining the speech path to the queuing node. networkCallTrace: call progress tracing across a network (that is, call reached node a, node b, terminated at c,...). networkIntercom: network wide access to an intercom system onm a Meridian 1. callPickupNetworkWide: connection oriented messages associated with the TCAP call pickup scan operation. The messages that actually pick up the ringing call. radioPaging: access to a radio paging system network wide, allowing single radio paging facilities in a relatively dense local PBX network. networkAccess: information to enable access to PBX features from outside the network. Additional data is provided to identify access capabilities for a spoecific call. (Similar to transmittiong authorization code capabilities network wide.) antiTromboning: actually includes two capabilities - NAS (Network Attendant Setvice) and Trunk Anti-Tromboning. Calls that exit the subnet to a PBX and are transferred back to a network number via the same D channel can be optimized. If PBX A (Passport A) calls across the subnet to Passport B, D channel Z, to PBX B, and PBX B transfers across D channel Z to Passport B and therefore to PBX C/Passport C, this allows tha call to simplify to PBX/Passport A to PBX/Passport C. miscellaneous: Any feature that is not listed above. Description of bits: networkAttendantService(0) classOfServiceTransport(1) trunkRouteOptimization(2) remoteVirtualQueuing(3) networkCallId(4) offHookQueuing(5) networkCallTrace(6) networkIntercom(7) callPickupNetworkWide(8) radioPaging(9) networkAccess(10) antiTromboning(11) miscellaneous(12)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

vnetMcdnSigMIB 1.3.6.1.4.1.562.2.4.2.142
OBJECT IDENTIFIER    

vnetMcdnSigGroup 1.3.6.1.4.1.562.2.4.2.142.1
OBJECT IDENTIFIER    

vnetMcdnSigGroupBE 1.3.6.1.4.1.562.2.4.2.142.1.5
OBJECT IDENTIFIER    

vnetMcdnSigGroupBE01 1.3.6.1.4.1.562.2.4.2.142.1.5.2
OBJECT IDENTIFIER    

vnetMcdnSigGroupBE01A 1.3.6.1.4.1.562.2.4.2.142.1.5.2.2
OBJECT IDENTIFIER    

vnetMcdnSigCapabilities 1.3.6.1.4.1.562.2.4.2.142.3
OBJECT IDENTIFIER    

vnetMcdnSigCapabilitiesBE 1.3.6.1.4.1.562.2.4.2.142.3.5
OBJECT IDENTIFIER    

vnetMcdnSigCapabilitiesBE01 1.3.6.1.4.1.562.2.4.2.142.3.5.2
OBJECT IDENTIFIER    

vnetMcdnSigCapabilitiesBE01A 1.3.6.1.4.1.562.2.4.2.142.3.5.2.2
OBJECT IDENTIFIER    

Defined Objects

SigChanMcdnRowStatusEntry  
SEQUENCE    
  RowStatus as sigChanMcdnRowStatus  
  DisplayString as sigChanMcdnComponentName  
  StorageType as sigChanMcdnStorageType  
  NonReplicated as sigChanMcdnIndex  

SigChanMcdnL2Entry  
SEQUENCE    
  Unsigned32 as sigChanMcdnT23  
  Unsigned32 as sigChanMcdnT200  
  Unsigned32 as sigChanMcdnN200  
  Unsigned32 as sigChanMcdnT203  
  Unsigned32 as sigChanMcdnCircuitSwitchedK  

SigChanMcdnL3Entry  
SEQUENCE    
  Unsigned32 as sigChanMcdnT302  
  Unsigned32 as sigChanMcdnT304  
  Unsigned32 as sigChanMcdnT309  
  Unsigned32 as sigChanMcdnT310  
  Unsigned32 as sigChanMcdnT316  
  Unsigned32 as sigChanMcdnT317  

SigChanMcdnProvEntry  
SEQUENCE    
  INTEGER as sigChanMcdnSide  
  Unsigned32 as sigChanMcdnMaxNonCallConcurrent  
  INTEGER as sigChanMcdnOverlapSending  
  INTEGER as sigChanMcdnOverlapReceiving  
  INTEGER as sigChanMcdnChanMaintenanceHandling  

SigChanMcdnStateEntry  
SEQUENCE    
  INTEGER as sigChanMcdnAdminState  
  INTEGER as sigChanMcdnOperationalState  
  INTEGER as sigChanMcdnUsageState  

SigChanMcdnStatsEntry  
SEQUENCE    
  Counter32 as sigChanMcdnTotalCallsToIf  
  Counter32 as sigChanMcdnTotalCallsFromIf  
  Counter32 as sigChanMcdnNonCallAssocSessionsToIf  
  Counter32 as sigChanMcdnNonCallAssocSessionsFromIf  

SigChanMcdnOperEntry  
SEQUENCE    
  Unsigned32 as sigChanMcdnActiveChannels  
  Unsigned32 as sigChanMcdnActiveVoiceChannels  
  Unsigned32 as sigChanMcdnActiveDataChannels  
  Unsigned32 as sigChanMcdnPeakActiveChannels  
  Unsigned32 as sigChanMcdnPeakActiveVoiceChannels  
  Unsigned32 as sigChanMcdnPeakActiveDataChannels  
  INTEGER as sigChanMcdnDChanStatus  

SigChanMcdnToolsEntry  
SEQUENCE    
  OCTET STRING as sigChanMcdnTracing  
  OCTET STRING as sigChanMcdnMessageTraced  
  OCTET STRING as sigChanMcdnDirectionTraced  

SigChanMcdnClsEntry  
SEQUENCE    
  OCTET STRING as sigChanMcdnClsFeaturesSupported  

SigChanMcdnCoEntry  
SEQUENCE    
  INTEGER as sigChanMcdnDropBackCongestion  
  OCTET STRING as sigChanMcdnNetworkNameDisplay  
  INTEGER as sigChanMcdnMultisiteBusinessGroup  
  OCTET STRING as sigChanMcdnConOrFeaturesSupported  

SigChanMcdnFramerRowStatusEntry  
SEQUENCE    
  RowStatus as sigChanMcdnFramerRowStatus  
  DisplayString as sigChanMcdnFramerComponentName  
  StorageType as sigChanMcdnFramerStorageType  
  NonReplicated as sigChanMcdnFramerIndex  

SigChanMcdnFramerProvEntry  
SEQUENCE    
  Link as sigChanMcdnFramerInterfaceName  

SigChanMcdnFramerStateEntry  
SEQUENCE    
  INTEGER as sigChanMcdnFramerAdminState  
  INTEGER as sigChanMcdnFramerOperationalState  
  INTEGER as sigChanMcdnFramerUsageState  

SigChanMcdnFramerStatsEntry  
SEQUENCE    
  Counter32 as sigChanMcdnFramerFrmToIf  
  Counter32 as sigChanMcdnFramerFrmFromIf  
  Counter32 as sigChanMcdnFramerOctetFromIf  
  Counter32 as sigChanMcdnFramerAborts  
  Counter32 as sigChanMcdnFramerCrcErrors  
  Counter32 as sigChanMcdnFramerLrcErrors  
  Counter32 as sigChanMcdnFramerNonOctetErrors  
  Counter32 as sigChanMcdnFramerOverruns  
  Counter32 as sigChanMcdnFramerUnderruns  
  Counter32 as sigChanMcdnFramerLargeFrmErrors