Nortel-Magellan-Passport-X25DteMIB

File: Nortel-Magellan-Passport-X25DteMIB.mib (149832 bytes)

Imported modules

RFC-1212 Nortel-Magellan-Passport-UsefulDefinitionsMIB Nortel-Magellan-Passport-StandardTextualConventionsMIB
Nortel-Magellan-Passport-TextualConventionsMIB

Imported symbols

OBJECT-TYPE components passportMIBs
Counter32 DisplayString StorageType
RowStatus InterfaceIndex Gauge32
Integer32 Unsigned32 AsciiString
NonReplicated DigitString HexString
Link

Defined Objects

x25Dte 1.3.6.1.4.1.562.2.4.1.90
OBJECT IDENTIFIER    

x25DteRowStatusTable 1.3.6.1.4.1.562.2.4.1.90.1
This entry controls the addition and deletion of x25Dte components.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteRowStatusEntry

x25DteRowStatusEntry 1.3.6.1.4.1.562.2.4.1.90.1.1
A single entry in the table represents a single x25Dte component.
OBJECT-TYPE    
  X25DteRowStatusEntry  

x25DteRowStatus 1.3.6.1.4.1.562.2.4.1.90.1.1.1
This variable is used as the basis for SNMP naming of x25Dte components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

x25DteComponentName 1.3.6.1.4.1.562.2.4.1.90.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

x25DteStorageType 1.3.6.1.4.1.562.2.4.1.90.1.1.4
This variable represents the storage type value for the x25Dte tables.
OBJECT-TYPE    
  StorageType  

x25DteIndex 1.3.6.1.4.1.562.2.4.1.90.1.1.10
This variable represents the index for the x25Dte tables.
OBJECT-TYPE    
  Integer32 1..65535  

x25DtePeer 1.3.6.1.4.1.562.2.4.1.90.2
OBJECT IDENTIFIER    

x25DtePeerRowStatusTable 1.3.6.1.4.1.562.2.4.1.90.2.1
This entry controls the addition and deletion of x25DtePeer components.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DtePeerRowStatusEntry

x25DtePeerRowStatusEntry 1.3.6.1.4.1.562.2.4.1.90.2.1.1
A single entry in the table represents a single x25DtePeer component.
OBJECT-TYPE    
  X25DtePeerRowStatusEntry  

x25DtePeerRowStatus 1.3.6.1.4.1.562.2.4.1.90.2.1.1.1
This variable is used as the basis for SNMP naming of x25DtePeer components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

x25DtePeerComponentName 1.3.6.1.4.1.562.2.4.1.90.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

x25DtePeerStorageType 1.3.6.1.4.1.562.2.4.1.90.2.1.1.4
This variable represents the storage type value for the x25DtePeer tables.
OBJECT-TYPE    
  StorageType  

x25DtePeerIndex 1.3.6.1.4.1.562.2.4.1.90.2.1.1.10
This variable represents the index for the x25DtePeer tables.
OBJECT-TYPE    
  Integer32 1..4095  

x25DtePeerIfTable 1.3.6.1.4.1.562.2.4.1.90.2.10
This group provides the administrative set of parameters for the Peer interface.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DtePeerIfEntry

x25DtePeerIfEntry 1.3.6.1.4.1.562.2.4.1.90.2.10.1
An entry in the x25DtePeerIfTable.
OBJECT-TYPE    
  X25DtePeerIfEntry  

x25DtePeerEncAddressType 1.3.6.1.4.1.562.2.4.1.90.2.10.1.1
This attribute specifies the encapsulation type for the address of the remote host with which this Peer component allows communication.
OBJECT-TYPE    
  INTEGER ip(204)  

x25DtePeerEncAddress 1.3.6.1.4.1.562.2.4.1.90.2.10.1.2
This attribute specifies the encapsulation address of the remote host with which this Peer component allows communication. This address must correspond with the encapsulation address type. Thus in the case of IP, it will contain a IP address.
OBJECT-TYPE    
  AsciiString SIZE(0..128)  

x25DtePeerX25Address 1.3.6.1.4.1.562.2.4.1.90.2.10.1.3
This attribute specifies the X.25 address that identifies the remote host with which this Peer component allows communication. The remote X.25 interface could be subdivided through the use of RemoteGroup components; in which case this x25Address is the X.25 address of the destination's RemoteGroup (not to be confused with the RemoteGroup indicated by the linkToRemoteGroup attribute of THIS Peer component).
OBJECT-TYPE    
  DigitString SIZE(1..15)  

x25DtePeerLinkToRemoteGroup 1.3.6.1.4.1.562.2.4.1.90.2.10.1.4
This is a link to a RemoteGroup component. The RemoteGroup components logically divide up the X.25 Interface such that a number of Protocol Ports (and consequently a number of Virtual Routers) may share the same X.25 Interface into a Wide Area Network. In particular, the remote host identified by this Peer component is designated as belonging to the RemoteGroup linked by this attribute. The set of all Peer components and PermLcn components which link to a given RemoteGroup determine the subset of remote hosts which are accessible to a particular Protocol Port (and ultimately a Virtual Router).
OBJECT-TYPE    
  Link  

x25DtePeerCpTable 1.3.6.1.4.1.562.2.4.1.90.2.12
This group contains the call parameters used to establish a call to/ from the remote host identified by this Peer component
OBJECT-TYPE    
  SEQUENCE OF  
    X25DtePeerCpEntry

x25DtePeerCpEntry 1.3.6.1.4.1.562.2.4.1.90.2.12.1
An entry in the x25DtePeerCpTable.
OBJECT-TYPE    
  X25DtePeerCpEntry  

x25DtePeerInPacketSize 1.3.6.1.4.1.562.2.4.1.90.2.12.1.1
This attribute specifies the default maximum receive packet size in octets. A setting of 0 indicates the inPacketSize setting for the X.25 interface (in X25Dte component) is used during call setup to the remote host identified by this Peer component.
OBJECT-TYPE    
  Unsigned32 0 | 16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096  

x25DtePeerOutPacketSize 1.3.6.1.4.1.562.2.4.1.90.2.12.1.2
This attribute specifies the default maximum transmit packet size in octets. A setting of 0 indicates the outPacketSize setting for the X.25 interface (in the X25Dte component) is used during call setup to the remote host identified by this Peer component.
OBJECT-TYPE    
  Unsigned32 0 | 16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096  

x25DtePeerInWindowSize 1.3.6.1.4.1.562.2.4.1.90.2.12.1.3
This attribute specifies the default receive window size. A window size of 0 indicates the inWindowSize setting for the X.25 interface (in the X25Dte component) is used during call setup to the remote host identified by this Peer component. A window size greater than 7 is only valid when the packetSequencing attribute of the X25Dte component is set to modulo128.
OBJECT-TYPE    
  Unsigned32 0..127  

x25DtePeerOutWindowSize 1.3.6.1.4.1.562.2.4.1.90.2.12.1.4
This attribute specifies the default transmit window size. A window size of 0 indicates the outWindowSize setting for the X.25 interface is used during call setup to the Peer identified by this component. A window size greater than 7 is only valid when the packetSequencing attribute of the X25Dte component is set to modulo128.
OBJECT-TYPE    
  Unsigned32 0..127  

x25DtePeerAcceptReverseCharging 1.3.6.1.4.1.562.2.4.1.90.2.12.1.5
This attribute specifies whether the local end will accept or refuse charges for a call from the remote host identified by this Peer component. A value of default indicates the use of the acceptReverseCharging value from the X25Dte component. If the value at the X25Dte level is neverAccept, a value of accept in this Peer component will be ignored because no reverse charge calls are to be accepted by this X.25 Dte.
OBJECT-TYPE    
  INTEGER default(1), accept(2), refuse(3)  

x25DtePeerProposeReverseCharging 1.3.6.1.4.1.562.2.4.1.90.2.12.1.6
This attribute specifies whether local/reverse charging is signalled in a call request packet. A value of default indicates the use of the value from the proposeReverseCharging attribute of the X25Dte component.
OBJECT-TYPE    
  INTEGER default(1), reverse(2), local(3)  

x25DtePeerOutThroughputClassSize 1.3.6.1.4.1.562.2.4.1.90.2.12.1.8
This attribute specifies the value of the transmit throughput class to be negotiated. A value of default indicates the use of the value from the outThroughputClassSize attribute of the X25Dte component. A value of notSpecified means the facility is not signalled.
OBJECT-TYPE    
  INTEGER n75(3), n150(4), n300(5), n600(6), n1200(7), n2400(8), n4800(9), n9600(10), n19200(11), n48000(12), n64000(13), notSpecified(17), default(18)  

x25DtePeerInThroughputClassSize 1.3.6.1.4.1.562.2.4.1.90.2.12.1.9
This attribute specifies the value of the receive throughput class to be negotiated. A value of default indicates the use of the value from the inThroughputClassSize attribute of the X25Dte component. A value of notSpecified means the facility is not signalled.
OBJECT-TYPE    
  INTEGER n75(3), n150(4), n300(5), n600(6), n1200(7), n2400(8), n4800(9), n9600(10), n19200(11), n48000(12), n64000(13), notSpecified(17), default(18)  

x25DtePeerCugIndex 1.3.6.1.4.1.562.2.4.1.90.2.12.1.10
This attribute specifies the index of the Closed User Group facility to signal. A value of 'DEF' indicates the use of the value from the cugIndex attribute of the X25Dte component. A value of null (empty string) indicates no CUG facility is to be signalled. If a cugIndex is provisioned to be signalled, the cugoaIndex attribute must be null.
OBJECT-TYPE    
  AsciiString SIZE(0..4)  

x25DtePeerCugoaIndex 1.3.6.1.4.1.562.2.4.1.90.2.12.1.11
This attribute specifies the index of the Closed User Group with Outgoing Access facility to signal. A value of 'DEF' indicates the use of the value from the cugoaIndex attribute of the X25Dte component. A value of null (empty string) indicates no CUGOA facility is to be signalled. If a cugoaIndex is provisioned to be signalled, the cugIndex attribute must be null.
OBJECT-TYPE    
  AsciiString SIZE(0..4)  

x25DtePeerNetworkUserIdentifier 1.3.6.1.4.1.562.2.4.1.90.2.12.1.12
This attribute specifies the Network User Identifier facility to signal. A value of null (empty string) indicates no NUI facility is to be signalled.
OBJECT-TYPE    
  HexString SIZE(0..108)  

x25DtePeerChargingInformation 1.3.6.1.4.1.562.2.4.1.90.2.12.1.13
This attribute specifies whether the charging information facility is signalled in the call request packet. A value of default indicates the use of the value from the chargingInformation attribute of the X25Dte component. A value of notSpecified means the facility is not signalled. A value of notRequested means the facility is signalled but charging information is not requested (that is, the charging info field of the facility is set Off). A value of requested means the facility is signalled to explicitly request charging information.
OBJECT-TYPE    
  INTEGER default(1), notSpecified(2), notRequested(3), requested(4)  

x25DtePeerRpoa 1.3.6.1.4.1.562.2.4.1.90.2.12.1.14
This attribute specifies the RPOA facility to signal in a call request packet. A value of 'DEF' indicates the use of the value from the rpoa attribute of the X25Dte component. A value of null (empty string) indicates no RPOA facility is to be signalled.
OBJECT-TYPE    
  AsciiString SIZE(0..108)  

x25DtePeerTrnstDlySlctnAInd 1.3.6.1.4.1.562.2.4.1.90.2.12.1.15
This attribute specifies the value of the Transit Delay Selection and Indication facility to signal in a call request packet. A value of 65536 indicates no facility is signalled. A value of 65537 indicates the use of the value from the trnstDlySlctnAInd attribute of the X25Dte component.
OBJECT-TYPE    
  Unsigned32 0..65537  

x25DtePeerCallingNetworkFax 1.3.6.1.4.1.562.2.4.1.90.2.12.1.24
This attribute specifies the Calling Network facilities to signal in a call request packet. The facilities are encoded here exactly as they are encoded in the call packet. These facilities do not include the marker facility code. A value of null (empty string) indicates the callingNetworkFax from the X25Dte are to be signalled. If that value is also null, no Calling Network Facilities are signalled.
OBJECT-TYPE    
  HexString SIZE(0..108)  

x25DtePeerCalledNetworkFax 1.3.6.1.4.1.562.2.4.1.90.2.12.1.25
This attribute specifies the Called Network facilities to signal in a call request packet. The facilities are encoded here exactly as they are encoded in the call packet. These facilities do not include the marker facility code. A value of null (empty string) indicates the calledNetworkFax from the X25Dte are to be signalled. If that value is also null, no Called Network Facilities are signalled.
OBJECT-TYPE    
  HexString SIZE(0..108)  

x25DtePeerCallUserData 1.3.6.1.4.1.562.2.4.1.90.2.12.1.26
This attribute specifies the user data to signal in a call request packet. A value of null (empty string) indicates that the callUserData from the X25Dte is to be signalled. If callUserData of the X25Dte component is also null and protocolEncType of this Peer has the value IP, H.CC will be signalled as the call user data of a call request packet. Thus for IP encapsulation according to RFC1356, both the callUserData from the Peer and X25Dte components must be null and the protocolEncType set to IP.
OBJECT-TYPE    
  HexString SIZE(0..128)  

x25DtePeerPEncTable 1.3.6.1.4.1.562.2.4.1.90.2.208
Each instance of this replicated attribute describes an encapsulation method permitted for encapsulating the protocol data units (PDUs) of an upper layer protocol when communicating with the remote host identified by this Peer component. The index of a given replicated instance of this attribute represents the relative priority of the encapsulation method specified by the given attribute instance. An attribute with index '1' has the highest priority, so the encapsulation method described by it will be the first one attempted when signalling a call to the link. If the protocolEncType is set to IP to encapsulate IP traffic according to RFC1356, the callUserData for this Peer component and the X25Dte component must both be null, so that H.CC will be signalled as the call user data of the call request. This indicates that the protocol encapsulation type of IP is to be used for the channel. A call received from the link will be accepted as long as the encapsulation method indicated in the call user data of the incoming call packet is included in one of these replicated attributes. (This presupposes that the incoming call has been directed to the RemoteGroup to which this Peer is linked through the linkToRemoteGroup attribute.)
OBJECT-TYPE    
  SEQUENCE OF  
    X25DtePeerPEncEntry

x25DtePeerPEncEntry 1.3.6.1.4.1.562.2.4.1.90.2.208.1
An entry in the x25DtePeerPEncTable.
OBJECT-TYPE    
  X25DtePeerPEncEntry  

x25DtePeerPEncIndex 1.3.6.1.4.1.562.2.4.1.90.2.208.1.1
This variable represents the index for the x25DtePeerPEncTable.
OBJECT-TYPE    
  Integer32 1..1  

x25DtePeerPEncValue 1.3.6.1.4.1.562.2.4.1.90.2.208.1.2
This variable represents an individual value for the x25DtePeerPEncTable.
OBJECT-TYPE    
  INTEGER ip(204)  

x25DtePeerPEncRowStatus 1.3.6.1.4.1.562.2.4.1.90.2.208.1.3
This variable is used to control the addition and deletion of individual values of the x25DtePeerPEncTable.
OBJECT-TYPE    
  RowStatus  

x25DtePeerLcnTable 1.3.6.1.4.1.562.2.4.1.90.2.209
This attribute specifies the local logical channel numbers (Lcn) in use for the X.25 calls to the remote host identified by this Peer component.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DtePeerLcnEntry

x25DtePeerLcnEntry 1.3.6.1.4.1.562.2.4.1.90.2.209.1
An entry in the x25DtePeerLcnTable.
OBJECT-TYPE    
  X25DtePeerLcnEntry  

x25DtePeerLcnValue 1.3.6.1.4.1.562.2.4.1.90.2.209.1.1
This variable represents both the value and the index for the x25DtePeerLcnTable.
OBJECT-TYPE    
  Integer32 1..4095  

x25DtePLcn 1.3.6.1.4.1.562.2.4.1.90.3
OBJECT IDENTIFIER    

x25DtePLcnRowStatusTable 1.3.6.1.4.1.562.2.4.1.90.3.1
This entry controls the addition and deletion of x25DtePLcn components.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DtePLcnRowStatusEntry

x25DtePLcnRowStatusEntry 1.3.6.1.4.1.562.2.4.1.90.3.1.1
A single entry in the table represents a single x25DtePLcn component.
OBJECT-TYPE    
  X25DtePLcnRowStatusEntry  

x25DtePLcnRowStatus 1.3.6.1.4.1.562.2.4.1.90.3.1.1.1
This variable is used as the basis for SNMP naming of x25DtePLcn components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

x25DtePLcnComponentName 1.3.6.1.4.1.562.2.4.1.90.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

x25DtePLcnStorageType 1.3.6.1.4.1.562.2.4.1.90.3.1.1.4
This variable represents the storage type value for the x25DtePLcn tables.
OBJECT-TYPE    
  StorageType  

x25DtePLcnIndex 1.3.6.1.4.1.562.2.4.1.90.3.1.1.10
This variable represents the index for the x25DtePLcn tables.
OBJECT-TYPE    
  Integer32 1..4095  

x25DtePLcnProvTable 1.3.6.1.4.1.562.2.4.1.90.3.10
This group contains the provisionable parameters for the permanent logical channels (PLcns) on the X.25 interface (corresponding to Permanent Virtual Circuits (PVCs) provisioned on the Wide Area Network).
OBJECT-TYPE    
  SEQUENCE OF  
    X25DtePLcnProvEntry

x25DtePLcnProvEntry 1.3.6.1.4.1.562.2.4.1.90.3.10.1
An entry in the x25DtePLcnProvTable.
OBJECT-TYPE    
  X25DtePLcnProvEntry  

x25DtePLcnEncAddressType 1.3.6.1.4.1.562.2.4.1.90.3.10.1.1
This attribute specifies the encapsulation type for the address of the remote host with which this Peer component allows communication.
OBJECT-TYPE    
  INTEGER none(0), ip(204)  

x25DtePLcnEncAddress 1.3.6.1.4.1.562.2.4.1.90.3.10.1.2
This attribute specifies the encapsulation address of the remote host with which this PermLcn component defines a connection
OBJECT-TYPE    
  AsciiString SIZE(0..128)  

x25DtePLcnProtocolEncType 1.3.6.1.4.1.562.2.4.1.90.3.10.1.3
This attribute specifies the encapsulation method to use when exchanging protocol data units (PDUs) over this channel. IP and Null protocolEncTypes are as defined in RFC1356. NscNull is an encapsulation method for carrying IP datagrams which requires removing 3 padding octets of zeroes and the protocol identifier H.CC from the front of each data packet received from the link in order to obtain the PDU. PDUs sent to the link are propounded by a the protocol identifier H.CC. NscNull should only be set when the remote host is following this same encapsulation method.
OBJECT-TYPE    
  INTEGER null(0), ip(204), nscNull(257)  

x25DtePLcnLinkToRemoteGroup 1.3.6.1.4.1.562.2.4.1.90.3.10.1.4
This attribute specifies the link to the RemoteGroup, indicating the RemoteGroup component with which this PermLcn component is associated. The RemoteGroup components logically divide up the X.25 Interface such that a number of Protocol Ports (and consequently a number of Virtual Routers) may share the same X.25 Interface into a Wide Area Network. In particular, the remote host identified by this PermLcn component is designated as belonging to the RemoteGroup linked by this attribute. The set of all PermLcn and Peer components which link to a given RemoteGroup determine the subset of remote hosts which are accessible to a particular Protocol Port (and ultimately a Virtual Router).
OBJECT-TYPE    
  Link  

x25DtePLcnInPacketSize 1.3.6.1.4.1.562.2.4.1.90.3.10.1.5
This attribute specifies the maximum receive packet size in octets.
OBJECT-TYPE    
  Unsigned32 16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096  

x25DtePLcnOutPacketSize 1.3.6.1.4.1.562.2.4.1.90.3.10.1.6
This attribute specifies the maximum transmit packet size in octets.
OBJECT-TYPE    
  Unsigned32 16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096  

x25DtePLcnInWindowSize 1.3.6.1.4.1.562.2.4.1.90.3.10.1.7
This attribute specifies the maximum receive window size. A inWindowSize greater than 7 is only valid when the packetSequencing attribute of the X25Dte component is set to modulo128.
OBJECT-TYPE    
  Unsigned32 1..127  

x25DtePLcnOutWindowSize 1.3.6.1.4.1.562.2.4.1.90.3.10.1.8
This attribute specifies the maximum transmit window size. A outWindowSize greater than 7 is only valid when the packetSequencing attribute of the X25Dte component is set to modulo128.
OBJECT-TYPE    
  Unsigned32 1..127  

x25DteLcn 1.3.6.1.4.1.562.2.4.1.90.4
OBJECT IDENTIFIER    

x25DteLcnRowStatusTable 1.3.6.1.4.1.562.2.4.1.90.4.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of x25DteLcn components.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteLcnRowStatusEntry

x25DteLcnRowStatusEntry 1.3.6.1.4.1.562.2.4.1.90.4.1.1
A single entry in the table represents a single x25DteLcn component.
OBJECT-TYPE    
  X25DteLcnRowStatusEntry  

x25DteLcnRowStatus 1.3.6.1.4.1.562.2.4.1.90.4.1.1.1
This variable is used as the basis for SNMP naming of x25DteLcn components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

x25DteLcnComponentName 1.3.6.1.4.1.562.2.4.1.90.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

x25DteLcnStorageType 1.3.6.1.4.1.562.2.4.1.90.4.1.1.4
This variable represents the storage type value for the x25DteLcn tables.
OBJECT-TYPE    
  StorageType  

x25DteLcnIndex 1.3.6.1.4.1.562.2.4.1.90.4.1.1.10
This variable represents the index for the x25DteLcn tables.
OBJECT-TYPE    
  Integer32 1..4095  

x25DteLcnStateTable 1.3.6.1.4.1.562.2.4.1.90.4.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteLcnStateEntry

x25DteLcnStateEntry 1.3.6.1.4.1.562.2.4.1.90.4.10.1
An entry in the x25DteLcnStateTable.
OBJECT-TYPE    
  X25DteLcnStateEntry  

x25DteLcnAdminState 1.3.6.1.4.1.562.2.4.1.90.4.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

x25DteLcnOperationalState 1.3.6.1.4.1.562.2.4.1.90.4.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

x25DteLcnUsageState 1.3.6.1.4.1.562.2.4.1.90.4.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

x25DteLcnCpTable 1.3.6.1.4.1.562.2.4.1.90.4.11
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the call parameters that are in use for this logical channel. For a PVC only the packet size and the window size attributes are meaningful.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteLcnCpEntry

x25DteLcnCpEntry 1.3.6.1.4.1.562.2.4.1.90.4.11.1
An entry in the x25DteLcnCpTable.
OBJECT-TYPE    
  X25DteLcnCpEntry  

x25DteLcnInPacketSize 1.3.6.1.4.1.562.2.4.1.90.4.11.1.1
This attribute indicates the maximum receive packet size in octets.
OBJECT-TYPE    
  Unsigned32 16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096  

x25DteLcnOutPacketSize 1.3.6.1.4.1.562.2.4.1.90.4.11.1.2
This attribute indicates the maximum transmit packet size in octets.
OBJECT-TYPE    
  Unsigned32 16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096  

x25DteLcnInWindowSize 1.3.6.1.4.1.562.2.4.1.90.4.11.1.3
This attribute indicates the receive window size.
OBJECT-TYPE    
  Unsigned32 1..127  

x25DteLcnOutWindowSize 1.3.6.1.4.1.562.2.4.1.90.4.11.1.4
This attribute indicates the transmit window size.
OBJECT-TYPE    
  Unsigned32 1..127  

x25DteLcnProposeReverseCharging 1.3.6.1.4.1.562.2.4.1.90.4.11.1.5
Specifies whether local/reverse charging was negotiated for this logical channel. To determine which end of the channel is paying for the call, this attribute must be examined in combination with the callDirection attribute. For example, if this attribute is set to reverse and the callDirection attribute indicates incoming, it means the incoming call signalled reverse charging, so the local end of the channel is being charged. On the other, if the value of this attribute is reverse and the callDirection is outgoing, it means that the call request sent to the link signalled reverse charging; so the remote end is charged. Similarly, a value of local must also be interpreted in combination with the callDirection to determine which end is being charged. If the value of the callDirection attribute is plcn, the proposeReverseCharging attribute is meaningless.
OBJECT-TYPE    
  INTEGER reverse(2), local(3)  

x25DteLcnFastSelect 1.3.6.1.4.1.562.2.4.1.90.4.11.1.6
This attribute indicates whether the fast select was used in establishing this logical channel.
OBJECT-TYPE    
  INTEGER unrestricted(3), restricted(4), no(5)  

x25DteLcnOutThroughputClassSize 1.3.6.1.4.1.562.2.4.1.90.4.11.1.7
This attribute specifies the transmit throughput class.
OBJECT-TYPE    
  INTEGER n75(3), n150(4), n300(5), n600(6), n1200(7), n2400(8), n4800(9), n9600(10), n19200(11), n48000(12), n64000(13), notSpecified(17)  

x25DteLcnInThroughputClassSize 1.3.6.1.4.1.562.2.4.1.90.4.11.1.8
This attribute specifies the receive throughput class.
OBJECT-TYPE    
  INTEGER n75(3), n150(4), n300(5), n600(6), n1200(7), n2400(8), n4800(9), n9600(10), n19200(11), n48000(12), n64000(13), notSpecified(17)  

x25DteLcnCugIndex 1.3.6.1.4.1.562.2.4.1.90.4.11.1.9
This attribute indicates the index of the Closed User Group facility used in establishing this logical channel.
OBJECT-TYPE    
  AsciiString SIZE(0..4)  

x25DteLcnCugoaIndex 1.3.6.1.4.1.562.2.4.1.90.4.11.1.10
This attribute indicates the index of the Closed User Group with Outgoing Access facility used in establishing this logical channel.
OBJECT-TYPE    
  AsciiString SIZE(0..4)  

x25DteLcnNetworkUserIdentifier 1.3.6.1.4.1.562.2.4.1.90.4.11.1.11
Specifies the Network User Identifier used for this logical channel.
OBJECT-TYPE    
  HexString SIZE(0..108)  

x25DteLcnChargingInformation 1.3.6.1.4.1.562.2.4.1.90.4.11.1.12
This attribute indicates whether or not the charging information facility was used in establishing this logical channel. A value of notSpecified means the facility was not signalled. A value of notRequested means the facility was signalled but charging information was not requested (that is, the charging info field of the facility was set Off). A value of requested means the facility was signalled to explicitly request charging information. DESCRIPTION
OBJECT-TYPE    
  INTEGER notSpecified(2), notRequested(3), requested(4)  

x25DteLcnRpoa 1.3.6.1.4.1.562.2.4.1.90.4.11.1.13
This attribute indicates the RPOA facility which was signalled in establishing this logical channel.
OBJECT-TYPE    
  AsciiString SIZE(0..108)  

x25DteLcnTrnstDlySlctnAInd 1.3.6.1.4.1.562.2.4.1.90.4.11.1.14
This attribute indicates the Transit Delay Selection and Indication value used for this logical channel. A value of 65536 means no facility was signalled.
OBJECT-TYPE    
  Unsigned32 0..65536  

x25DteLcnCallingNetworkFax 1.3.6.1.4.1.562.2.4.1.90.4.11.1.23
This attribute indicates the Calling Network facilities which were signalled in the call packet. A value of null (empty string) means no calling network facilities were signalled.
OBJECT-TYPE    
  HexString SIZE(0..108)  

x25DteLcnCalledNetworkFax 1.3.6.1.4.1.562.2.4.1.90.4.11.1.24
This attribute indicates the called network facilities which were signalled in the call packet. A value of null (empty string) means no called network facilities were signalled.
OBJECT-TYPE    
  HexString SIZE(0..108)  

x25DteLcnCallUserData 1.3.6.1.4.1.562.2.4.1.90.4.11.1.25
This attribute indicates the user data which was signalled in the call packet. A value of null (empty string) means no user data was signalled.
OBJECT-TYPE    
  HexString SIZE(0..128)  

x25DteLcnLcnStatusTable 1.3.6.1.4.1.562.2.4.1.90.4.12
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the status for an X.25 Logical Channel.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteLcnLcnStatusEntry

x25DteLcnLcnStatusEntry 1.3.6.1.4.1.562.2.4.1.90.4.12.1
An entry in the x25DteLcnLcnStatusTable.
OBJECT-TYPE    
  X25DteLcnLcnStatusEntry  

x25DteLcnStatus 1.3.6.1.4.1.562.2.4.1.90.4.12.1.1
This attribute indicates the current state of the logical channel.
OBJECT-TYPE    
  INTEGER closed(2), calling(3), dataTransfer(4), clearing(5), resetting(7)  

x25DteLcnCallDirection 1.3.6.1.4.1.562.2.4.1.90.4.12.1.3
This attribute indicates the direction of the call that caused the establishment of this channel.
OBJECT-TYPE    
  INTEGER incoming(1), outgoing(2), permanentLcn(3)  

x25DteLcnCalledAddress 1.3.6.1.4.1.562.2.4.1.90.4.12.1.4
This attribute indicates the called X.25 address to which the call is established.
OBJECT-TYPE    
  DigitString SIZE(0..15)  

x25DteLcnCallingAddress 1.3.6.1.4.1.562.2.4.1.90.4.12.1.5
This attribute indicates the calling X.25 address from which the call originated
OBJECT-TYPE    
  DigitString SIZE(0..15)  

x25DteLcnOriginalCalledAddress 1.3.6.1.4.1.562.2.4.1.90.4.12.1.6
This attribute indicates the X.25 address of the originally called DTE to which the call was attempted. This could be different from the value of the calledAddress attribute in the case where the original call was redirected.
OBJECT-TYPE    
  DigitString SIZE(0..15)  

x25DteLcnStatsTable 1.3.6.1.4.1.562.2.4.1.90.4.13
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational statistics for an X.25 Logical Channel.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteLcnStatsEntry

x25DteLcnStatsEntry 1.3.6.1.4.1.562.2.4.1.90.4.13.1
An entry in the x25DteLcnStatsTable.
OBJECT-TYPE    
  X25DteLcnStatsEntry  

x25DteLcnInUknownProtocols 1.3.6.1.4.1.562.2.4.1.90.4.13.1.1
This attribute counts the number packets received from link which were discareded because of an unkown or unsupported protocols.
OBJECT-TYPE    
  Counter32  

x25DteLcnInDataOctets 1.3.6.1.4.1.562.2.4.1.90.4.13.1.2
This attribute counts the number of octets of user data received from the link.
OBJECT-TYPE    
  Counter32  

x25DteLcnInDataPackets 1.3.6.1.4.1.562.2.4.1.90.4.13.1.3
This attribute counts the number of data packets received from the link.
OBJECT-TYPE    
  Counter32  

x25DteLcnInRmtInitiatedRsts 1.3.6.1.4.1.562.2.4.1.90.4.13.1.4
This attribute counts the number of reset packets, with a cause code of 'DTE initiated', which were received from the link
OBJECT-TYPE    
  Counter32  

x25DteLcnInPrvdrInitiatedRsts 1.3.6.1.4.1.562.2.4.1.90.4.13.1.5
This attribute counts the number of reset packets, with a cause code other than 'DTE initiated', which were received from the link.
OBJECT-TYPE    
  Counter32  

x25DteLcnInInterruptPackets 1.3.6.1.4.1.562.2.4.1.90.4.13.1.6
This attribute counts the number of interrupt packets received from the link.
OBJECT-TYPE    
  Counter32  

x25DteLcnOutDataOctets 1.3.6.1.4.1.562.2.4.1.90.4.13.1.7
This attribute counts the number of octets of user data sent to the link.
OBJECT-TYPE    
  Counter32  

x25DteLcnOutDataPackets 1.3.6.1.4.1.562.2.4.1.90.4.13.1.8
This attribute counts the number of data packets sent to link.
OBJECT-TYPE    
  Counter32  

x25DteLcnOutInterruptPackets 1.3.6.1.4.1.562.2.4.1.90.4.13.1.9
This attribute counts the number of interrupt packets sent to link.
OBJECT-TYPE    
  Counter32  

x25DteLcnT22ResetTimeouts 1.3.6.1.4.1.562.2.4.1.90.4.13.1.10
This attribute counts the number of times the t22 reset timer has expired.
OBJECT-TYPE    
  Counter32  

x25DteLapb 1.3.6.1.4.1.562.2.4.1.90.5
OBJECT IDENTIFIER    

x25DteLapbRowStatusTable 1.3.6.1.4.1.562.2.4.1.90.5.1
This entry controls the addition and deletion of x25DteLapb components.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteLapbRowStatusEntry

x25DteLapbRowStatusEntry 1.3.6.1.4.1.562.2.4.1.90.5.1.1
A single entry in the table represents a single x25DteLapb component.
OBJECT-TYPE    
  X25DteLapbRowStatusEntry  

x25DteLapbRowStatus 1.3.6.1.4.1.562.2.4.1.90.5.1.1.1
This variable is used as the basis for SNMP naming of x25DteLapb components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

x25DteLapbComponentName 1.3.6.1.4.1.562.2.4.1.90.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

x25DteLapbStorageType 1.3.6.1.4.1.562.2.4.1.90.5.1.1.4
This variable represents the storage type value for the x25DteLapb tables.
OBJECT-TYPE    
  StorageType  

x25DteLapbIndex 1.3.6.1.4.1.562.2.4.1.90.5.1.1.10
This variable represents the index for the x25DteLapb tables.
OBJECT-TYPE    
  NonReplicated  

x25DteLapbFramer 1.3.6.1.4.1.562.2.4.1.90.5.2
OBJECT IDENTIFIER    

x25DteLapbFramerRowStatusTable 1.3.6.1.4.1.562.2.4.1.90.5.2.1
This entry controls the addition and deletion of x25DteLapbFramer components.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteLapbFramerRowStatusEntry

x25DteLapbFramerRowStatusEntry 1.3.6.1.4.1.562.2.4.1.90.5.2.1.1
A single entry in the table represents a single x25DteLapbFramer component.
OBJECT-TYPE    
  X25DteLapbFramerRowStatusEntry  

x25DteLapbFramerRowStatus 1.3.6.1.4.1.562.2.4.1.90.5.2.1.1.1
This variable is used as the basis for SNMP naming of x25DteLapbFramer components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

x25DteLapbFramerComponentName 1.3.6.1.4.1.562.2.4.1.90.5.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

x25DteLapbFramerStorageType 1.3.6.1.4.1.562.2.4.1.90.5.2.1.1.4
This variable represents the storage type value for the x25DteLapbFramer tables.
OBJECT-TYPE    
  StorageType  

x25DteLapbFramerIndex 1.3.6.1.4.1.562.2.4.1.90.5.2.1.1.10
This variable represents the index for the x25DteLapbFramer tables.
OBJECT-TYPE    
  NonReplicated  

x25DteLapbFramerProvTable 1.3.6.1.4.1.562.2.4.1.90.5.2.10
This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteLapbFramerProvEntry

x25DteLapbFramerProvEntry 1.3.6.1.4.1.562.2.4.1.90.5.2.10.1
An entry in the x25DteLapbFramerProvTable.
OBJECT-TYPE    
  X25DteLapbFramerProvEntry  

x25DteLapbFramerInterfaceName 1.3.6.1.4.1.562.2.4.1.90.5.2.10.1.1
This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run.
OBJECT-TYPE    
  Link  

x25DteLapbFramerLinkTable 1.3.6.1.4.1.562.2.4.1.90.5.2.11
This group contains attributes defining the framing of data on the link interface.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteLapbFramerLinkEntry

x25DteLapbFramerLinkEntry 1.3.6.1.4.1.562.2.4.1.90.5.2.11.1
An entry in the x25DteLapbFramerLinkTable.
OBJECT-TYPE    
  X25DteLapbFramerLinkEntry  

x25DteLapbFramerFlagsBetweenFrames 1.3.6.1.4.1.562.2.4.1.90.5.2.11.1.4
This attribute defines the number of flags that are inserted between frames sent to the link interface.
OBJECT-TYPE    
  Unsigned32 1..16  

x25DteLapbFramerStateTable 1.3.6.1.4.1.562.2.4.1.90.5.2.12
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteLapbFramerStateEntry

x25DteLapbFramerStateEntry 1.3.6.1.4.1.562.2.4.1.90.5.2.12.1
An entry in the x25DteLapbFramerStateTable.
OBJECT-TYPE    
  X25DteLapbFramerStateEntry  

x25DteLapbFramerAdminState 1.3.6.1.4.1.562.2.4.1.90.5.2.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

x25DteLapbFramerOperationalState 1.3.6.1.4.1.562.2.4.1.90.5.2.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

x25DteLapbFramerUsageState 1.3.6.1.4.1.562.2.4.1.90.5.2.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

x25DteLapbFramerStatsTable 1.3.6.1.4.1.562.2.4.1.90.5.2.13
This group contains the operational statistics data for a Framer component.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteLapbFramerStatsEntry

x25DteLapbFramerStatsEntry 1.3.6.1.4.1.562.2.4.1.90.5.2.13.1
An entry in the x25DteLapbFramerStatsTable.
OBJECT-TYPE    
  X25DteLapbFramerStatsEntry  

x25DteLapbFramerFrmToIf 1.3.6.1.4.1.562.2.4.1.90.5.2.13.1.1
The number of frames transmitted to the link interface by Framer. Note: This does not include the number of frames transmitted directly to the hardware queue, thus bypassing the Framer component.
OBJECT-TYPE    
  Counter32  

x25DteLapbFramerFrmFromIf 1.3.6.1.4.1.562.2.4.1.90.5.2.13.1.2
The number of frames received from the link interface by Framer.
OBJECT-TYPE    
  Counter32  

x25DteLapbFramerOctetFromIf 1.3.6.1.4.1.562.2.4.1.90.5.2.13.1.3
The number of bytes received from the link interface by Framer.
OBJECT-TYPE    
  Counter32  

x25DteLapbFramerAborts 1.3.6.1.4.1.562.2.4.1.90.5.2.13.1.4
This attribute is the total number of aborts received.
OBJECT-TYPE    
  Counter32  

x25DteLapbFramerCrcErrors 1.3.6.1.4.1.562.2.4.1.90.5.2.13.1.5
This attribute is the total number of frames with CRC errors, occurring in the receive direction from the link.
OBJECT-TYPE    
  Counter32  

x25DteLapbFramerLrcErrors 1.3.6.1.4.1.562.2.4.1.90.5.2.13.1.6
This attribute is the total number of frames with LRC errors, occurring in the Tx link prior to transmission onto the link.
OBJECT-TYPE    
  Counter32  

x25DteLapbFramerNonOctetErrors 1.3.6.1.4.1.562.2.4.1.90.5.2.13.1.7
This attribute is the total number of frames that were non octet aligned.
OBJECT-TYPE    
  Counter32  

x25DteLapbFramerOverruns 1.3.6.1.4.1.562.2.4.1.90.5.2.13.1.8
This attribute is the total number of frames received from the link for which overruns occurred.
OBJECT-TYPE    
  Counter32  

x25DteLapbFramerUnderruns 1.3.6.1.4.1.562.2.4.1.90.5.2.13.1.9
This attribute is the total number of frames transmitted to the link for which underruns occurred.
OBJECT-TYPE    
  Counter32  

x25DteLapbFramerUtilTable 1.3.6.1.4.1.562.2.4.1.90.5.2.14
This group contains the link utilizaiton operational data for a Framer component.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteLapbFramerUtilEntry

x25DteLapbFramerUtilEntry 1.3.6.1.4.1.562.2.4.1.90.5.2.14.1
An entry in the x25DteLapbFramerUtilTable.
OBJECT-TYPE    
  X25DteLapbFramerUtilEntry  

x25DteLapbFramerNormPrioLinkUtilToIf 1.3.6.1.4.1.562.2.4.1.90.5.2.14.1.1
This attribute is the utilization of the normal and high priority data traffic (interruptable traffic) sent to the link as a percentage of the available bandwidth on the link. Note that this includes traffic with Transfer Priorities of 0, 6 and 9 and/or Emission Priority of 2 and 3. The utilization is the average for the last minute.
OBJECT-TYPE    
  Gauge32 0..100  

x25DteLapbFramerNormPrioLinkUtilFromIf 1.3.6.1.4.1.562.2.4.1.90.5.2.14.1.3
This attribute is the utilization of the normal and high priority data traffic (interruptable traffic) received from the link as a percentage of the available bandwidth on the link. Note that this includes traffic with Transfer Priorities (TP) of 0, 6 or 9 and/or Emission Priority of 2 and 3. The utilization is the average for the last minute.
OBJECT-TYPE    
  Gauge32 0..100  

x25DteLapbCpTable 1.3.6.1.4.1.562.2.4.1.90.5.10
X25Dte/n Lapb This group contains the set of configuration parameters for the LAPB interface.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteLapbCpEntry

x25DteLapbCpEntry 1.3.6.1.4.1.562.2.4.1.90.5.10.1
An entry in the x25DteLapbCpTable.
OBJECT-TYPE    
  X25DteLapbCpEntry  

x25DteLapbStationType 1.3.6.1.4.1.562.2.4.1.90.5.10.1.1
This attribute specifies the DCE or the DTE role of operation for the LAPB interface. Changing this attribute will cause the lapb link to Reset.
OBJECT-TYPE    
  INTEGER dte(1), dce(2)  

x25DteLapbFrameSequencing 1.3.6.1.4.1.562.2.4.1.90.5.10.1.2
This attribute specifies the modulo of the frame sequence numbering of the LAPB interface. Changing this attribute will cause the lapb link to Reset.
OBJECT-TYPE    
  INTEGER modulo8(1), modulo128(2)  

x25DteLapbN1FrameSize 1.3.6.1.4.1.562.2.4.1.90.5.10.1.3
This attribute specifies the maximum frame size in bits that can be transmitted or received. This value must be greater than or equal to the maximum packet size across the interface(in bits)+ max level 3 header size(in bits)+ max level 2 header size(in bits)+ crc in bits. (max Pkt size + -------------> 4096*8 max level 3 header size + ---> 4*8 level 2 header size + --------> 5*8 crc -------------------> 2*8)
OBJECT-TYPE    
  Unsigned32 40..32856  

x25DteLapbKWindowSize 1.3.6.1.4.1.562.2.4.1.90.5.10.1.4
This attribute specifies the window size. This is the maximum number of unacknowledged sequenced frames that may be outstanding from or to this interface at any one time. A window size of greater than 7 is only valid when the sequence numbering of frames is modulo 128.
OBJECT-TYPE    
  Unsigned32 1..127  

x25DteLapbN2TransmitLimit 1.3.6.1.4.1.562.2.4.1.90.5.10.1.5
This attribute specifies the maximum number of times a frame can be transmitted before appropriate recovery action is taken.
OBJECT-TYPE    
  Unsigned32 1..20  

x25DteLapbT1AckTimer 1.3.6.1.4.1.562.2.4.1.90.5.10.1.6
This attribute specifies the period in milliseconds within which an acknowledgment of a sent frame must be received. The value set for t1 ack timer must be less than the value set for the t4 idle probe timer.
OBJECT-TYPE    
  Unsigned32 1000..10000  

x25DteLapbT2AckDelayTimer 1.3.6.1.4.1.562.2.4.1.90.5.10.1.7
This attribute specifies the maximum period in milliseconds permissible to wait before sending an acknowledgment for a received in sequenced I-frame. A value of 0 means there will be no delay in acknowledgment.
OBJECT-TYPE    
  Unsigned32 0..10000  

x25DteLapbT4IdleProbeTimer 1.3.6.1.4.1.562.2.4.1.90.5.10.1.8
This attribute specifies the time period in milliseconds the link will be permitted to remain idle (that is, no frames are exchanged on the data link). Upon expiry of this timer, LAPB will poll its peer for status. The value set for t4 idle probe timer must be greater than the value set for the t1 ack timer.
OBJECT-TYPE    
  Unsigned32 1000..65535000  

x25DteLapbActionInitiate 1.3.6.1.4.1.562.2.4.1.90.5.10.1.9
This attribute specifies the action to be taken by the LAPB interface to initiate link setup.
OBJECT-TYPE    
  INTEGER sendSABM(1), sendDM(3), none(4)  

x25DteLapbActionRecvDM 1.3.6.1.4.1.562.2.4.1.90.5.10.1.10
This attribute specifies the action to be taken by the LAPB interface when it receives a DM response.
OBJECT-TYPE    
  INTEGER sendSABM(1)  

x25DteLapbTxQDegradeThreshold 1.3.6.1.4.1.562.2.4.1.90.5.10.1.11
This attribute specifies the threshold of the number of higher layer packets queued, beyond which LAPB should initiate a service degrade alarm. A value of 65536 means no threshold.
OBJECT-TYPE    
  Unsigned32 1..65536  

x25DteLapbTxQResetThreshold 1.3.6.1.4.1.562.2.4.1.90.5.10.1.12
This attribute specifies the threshold of the number of higher layer packets queued, beyond which LAPB should initiate an overload alarm and reset the link. A value of 65536 means no threshold.
OBJECT-TYPE    
  Unsigned32 1..65536  

x25DteLapbStateTable 1.3.6.1.4.1.562.2.4.1.90.5.11
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteLapbStateEntry

x25DteLapbStateEntry 1.3.6.1.4.1.562.2.4.1.90.5.11.1
An entry in the x25DteLapbStateTable.
OBJECT-TYPE    
  X25DteLapbStateEntry  

x25DteLapbAdminState 1.3.6.1.4.1.562.2.4.1.90.5.11.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

x25DteLapbOperationalState 1.3.6.1.4.1.562.2.4.1.90.5.11.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

x25DteLapbUsageState 1.3.6.1.4.1.562.2.4.1.90.5.11.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

x25DteLapbStatusTable 1.3.6.1.4.1.562.2.4.1.90.5.12
This group contains the status for the LAPB interface.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteLapbStatusEntry

x25DteLapbStatusEntry 1.3.6.1.4.1.562.2.4.1.90.5.12.1
An entry in the x25DteLapbStatusTable.
OBJECT-TYPE    
  X25DteLapbStatusEntry  

x25DteLapbCurrentState 1.3.6.1.4.1.562.2.4.1.90.5.12.1.1
This attribute specifies the current state of the LAPB interface.
OBJECT-TYPE    
  INTEGER disconnected(1), linkSetup(2), frameReject(3), disconnectRequest(4), informationTransfer(5), waitingAck(7)  

x25DteLapbLastStateChangeReason 1.3.6.1.4.1.562.2.4.1.90.5.12.1.2
This attribute specifies the reason for the most recent state change.
OBJECT-TYPE    
  INTEGER notStarted(1), abmEntered(2), abmeEntered(3), abmReset(4), abmeReset(5), dmReceived(6), dmSent(7), discReceived(8), discSent(9), frmrReceived(10), frmrSent(11), n2TimeOut(12), other(13)  

x25DteLapbFrmrTransmit 1.3.6.1.4.1.562.2.4.1.90.5.12.1.3
This attribute specifies the Information field of the FRMR most recently sent.
OBJECT-TYPE    
  HexString SIZE(0..7)  

x25DteLapbFrmrReceive 1.3.6.1.4.1.562.2.4.1.90.5.12.1.4
This attribute specifies the Information field of the FRMR most recently received.
OBJECT-TYPE    
  HexString SIZE(0..7)  

x25DteLapbCurrentQueueSize 1.3.6.1.4.1.562.2.4.1.90.5.12.1.5
This attribute specifies the number of packets on the lapb transmit queue.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

x25DteLapbStatsTable 1.3.6.1.4.1.562.2.4.1.90.5.13
This group contains the statistics for the LAPB interface.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteLapbStatsEntry

x25DteLapbStatsEntry 1.3.6.1.4.1.562.2.4.1.90.5.13.1
An entry in the x25DteLapbStatsTable.
OBJECT-TYPE    
  X25DteLapbStatsEntry  

x25DteLapbStateChanges 1.3.6.1.4.1.562.2.4.1.90.5.13.1.1
This attribute counts the number of times LAPB state has changed. Refer to the attribute 'linkState' for the set of possible states.
OBJECT-TYPE    
  Counter32  

x25DteLapbRemoteBusy 1.3.6.1.4.1.562.2.4.1.90.5.13.1.2
This attribute counts the number of times transmission of an I-frame was un-successful due to a perceived remote busy condition (window closed or remote busy).
OBJECT-TYPE    
  Counter32  

x25DteLapbTransmitRejectFrames 1.3.6.1.4.1.562.2.4.1.90.5.13.1.3
This attribute counts the number of REJ frames sent by the interface.
OBJECT-TYPE    
  Counter32  

x25DteLapbReceiveRejectFrames 1.3.6.1.4.1.562.2.4.1.90.5.13.1.4
This attribute counts the number of REJ frames received by the interface.
OBJECT-TYPE    
  Counter32  

x25DteLapbT1AckTimeout 1.3.6.1.4.1.562.2.4.1.90.5.13.1.5
This attribute counts the number of times the T1 timer has expired.
OBJECT-TYPE    
  Counter32  

x25DtePle 1.3.6.1.4.1.562.2.4.1.90.6
OBJECT IDENTIFIER    

x25DtePleRowStatusTable 1.3.6.1.4.1.562.2.4.1.90.6.1
This entry controls the addition and deletion of x25DtePle components.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DtePleRowStatusEntry

x25DtePleRowStatusEntry 1.3.6.1.4.1.562.2.4.1.90.6.1.1
A single entry in the table represents a single x25DtePle component.
OBJECT-TYPE    
  X25DtePleRowStatusEntry  

x25DtePleRowStatus 1.3.6.1.4.1.562.2.4.1.90.6.1.1.1
This variable is used as the basis for SNMP naming of x25DtePle components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

x25DtePleComponentName 1.3.6.1.4.1.562.2.4.1.90.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

x25DtePleStorageType 1.3.6.1.4.1.562.2.4.1.90.6.1.1.4
This variable represents the storage type value for the x25DtePle tables.
OBJECT-TYPE    
  StorageType  

x25DtePleIndex 1.3.6.1.4.1.562.2.4.1.90.6.1.1.10
This variable represents the index for the x25DtePle tables.
OBJECT-TYPE    
  NonReplicated  

x25DtePleProvTable 1.3.6.1.4.1.562.2.4.1.90.6.10
This group contains the provisionable attributes relevant to an interface used to carry Multiprotocol Interconnect traffic over X.25.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DtePleProvEntry

x25DtePleProvEntry 1.3.6.1.4.1.562.2.4.1.90.6.10.1
An entry in the x25DtePleProvTable.
OBJECT-TYPE    
  X25DtePleProvEntry  

x25DtePleInactivityTimer 1.3.6.1.4.1.562.2.4.1.90.6.10.1.1
This attribute specifies the period in milliseconds this interface will keep an idle connection open before closing it.
OBJECT-TYPE    
  Unsigned32 0..65536000  

x25DtePleOpTable 1.3.6.1.4.1.562.2.4.1.90.6.11
This group contains the Operational attributes relevant to an interface used to carry Multiprotocol Interconnect traffic over X.25.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DtePleOpEntry

x25DtePleOpEntry 1.3.6.1.4.1.562.2.4.1.90.6.11.1
An entry in the x25DtePleOpTable.
OBJECT-TYPE    
  X25DtePleOpEntry  

x25DtePleEncAddrToX25LkupFlrs 1.3.6.1.4.1.562.2.4.1.90.6.11.1.1
This attribute indicates the number of times a translation attempt from an Encapsulation address to an X.25 address failed to find a corresponding X.25 address. Such a failure could occur when a Protocol Port, linked to a RemoteGroup via the linkToProtocolPort attribute of the RemoteGroup, requests through the software that a X.25 call be established to a particular Encapsulation address. If the RemoteGroup does not have a Peer component linked in its linkToPeer attribute list, with the encAddress attribute equal to the Encapsulation address specified, this counter will be incremented, because the corresponding Peer component needed to establish an X.25 connection was not found.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

x25DtePleLastFailedEncAddr 1.3.6.1.4.1.562.2.4.1.90.6.11.1.2
This attribute indicates the last Encapsulation address for which no corresponding X.25 address was found and thus caused encAddressToX25LkupFlrs to be incremented.
OBJECT-TYPE    
  HexString SIZE(2..128)  

x25DtePleX25AddrToEncLkupFlrs 1.3.6.1.4.1.562.2.4.1.90.6.11.1.4
This attribute indicates the number of times a translation attempt from an X.25 address to an Encapsulation address failed to find a corresponding Encapsulation address. Such a failure could occur when a incoming call received from the link by the X.25 DTE is directed to a specific RemoteGroup because the called address matches the localAddress attribute of the RemoteGroup component. If the RemoteGroup component does not have a Peer component linked in its linkToPeer attribute list, with the x25Address attribute equal to the calling address from the incoming call packet, there is no appropriate Peer component, so the call is cleared and this counter is incremented.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

x25DtePleLastFailedX25Addr 1.3.6.1.4.1.562.2.4.1.90.6.11.1.5
This field specifies the last X.25 address that caused x25AddressToEncLkupFlrs to be incremented.
OBJECT-TYPE    
  DigitString SIZE(0..15)  

x25DteRg 1.3.6.1.4.1.562.2.4.1.90.7
OBJECT IDENTIFIER    

x25DteRgRowStatusTable 1.3.6.1.4.1.562.2.4.1.90.7.1
This entry controls the addition and deletion of x25DteRg components.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteRgRowStatusEntry

x25DteRgRowStatusEntry 1.3.6.1.4.1.562.2.4.1.90.7.1.1
A single entry in the table represents a single x25DteRg component.
OBJECT-TYPE    
  X25DteRgRowStatusEntry  

x25DteRgRowStatus 1.3.6.1.4.1.562.2.4.1.90.7.1.1.1
This variable is used as the basis for SNMP naming of x25DteRg components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

x25DteRgComponentName 1.3.6.1.4.1.562.2.4.1.90.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

x25DteRgStorageType 1.3.6.1.4.1.562.2.4.1.90.7.1.1.4
This variable represents the storage type value for the x25DteRg tables.
OBJECT-TYPE    
  StorageType  

x25DteRgIndex 1.3.6.1.4.1.562.2.4.1.90.7.1.1.10
This variable represents the index for the x25DteRg tables.
OBJECT-TYPE    
  Integer32 1..1023  

x25DteRgIfEntryTable 1.3.6.1.4.1.562.2.4.1.90.7.10
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteRgIfEntryEntry

x25DteRgIfEntryEntry 1.3.6.1.4.1.562.2.4.1.90.7.10.1
An entry in the x25DteRgIfEntryTable.
OBJECT-TYPE    
  X25DteRgIfEntryEntry  

x25DteRgIfAdminStatus 1.3.6.1.4.1.562.2.4.1.90.7.10.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

x25DteRgIfIndex 1.3.6.1.4.1.562.2.4.1.90.7.10.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

x25DteRgProvTable 1.3.6.1.4.1.562.2.4.1.90.7.11
This group contains the provisionable attributes of the RemoteGroup component.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteRgProvEntry

x25DteRgProvEntry 1.3.6.1.4.1.562.2.4.1.90.7.11.1
An entry in the x25DteRgProvTable.
OBJECT-TYPE    
  X25DteRgProvEntry  

x25DteRgLinkToProtocolPort 1.3.6.1.4.1.562.2.4.1.90.7.11.1.1
This attribute contains a protocol port component name. The attribute associates the application with a protocol port.
OBJECT-TYPE    
  Link  

x25DteRgLocalAddress 1.3.6.1.4.1.562.2.4.1.90.7.11.1.2
This attribute contains the unique X.25 address which identifies this RemoteGroup. It should correspond to the called address in X.25 incoming call packets which are to be directed to this RemoteGroup. This allows calls received from the link to be directed to the appropriate RemoteGroup based on the called address in the X.25 call packet. The RemoteGroup components allow the X.25 interface to be shared amongst a number of Protocol Ports (and ultimately Virtual Routers) because each RemoteGroup is coupled with a specific ProtocolPort through its linkToProtocolPort attribute.
OBJECT-TYPE    
  DigitString SIZE(1..15)  

x25DteRgMtuSize 1.3.6.1.4.1.562.2.4.1.90.7.11.1.3
This attribute specifies the Maximum Transmit Unit (MTU); that is, the size of the largest datagram (in octets) which can be sent/ received on the interface.
OBJECT-TYPE    
  Unsigned32 576..9188  

x25DteRgStateTable 1.3.6.1.4.1.562.2.4.1.90.7.12
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteRgStateEntry

x25DteRgStateEntry 1.3.6.1.4.1.562.2.4.1.90.7.12.1
An entry in the x25DteRgStateTable.
OBJECT-TYPE    
  X25DteRgStateEntry  

x25DteRgAdminState 1.3.6.1.4.1.562.2.4.1.90.7.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

x25DteRgOperationalState 1.3.6.1.4.1.562.2.4.1.90.7.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

x25DteRgUsageState 1.3.6.1.4.1.562.2.4.1.90.7.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

x25DteRgOperStatusTable 1.3.6.1.4.1.562.2.4.1.90.7.13
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteRgOperStatusEntry

x25DteRgOperStatusEntry 1.3.6.1.4.1.562.2.4.1.90.7.13.1
An entry in the x25DteRgOperStatusTable.
OBJECT-TYPE    
  X25DteRgOperStatusEntry  

x25DteRgSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.90.7.13.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

x25DteRgLTPlcnTable 1.3.6.1.4.1.562.2.4.1.90.7.210
This attribute is a list of links to PermLcn components. The set of all Peer and PermLcn components which link to a given RemoteGroup determine the subset of remote hosts which are accessible to a particular Protocol Port (and ultimately a Virtual Router).
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteRgLTPlcnEntry

x25DteRgLTPlcnEntry 1.3.6.1.4.1.562.2.4.1.90.7.210.1
An entry in the x25DteRgLTPlcnTable.
OBJECT-TYPE    
  X25DteRgLTPlcnEntry  

x25DteRgLTPlcnValue 1.3.6.1.4.1.562.2.4.1.90.7.210.1.1
This variable represents both the value and the index for the x25DteRgLTPlcnTable.
OBJECT-TYPE    
  Link  

x25DteRgLTPlcnRowStatus 1.3.6.1.4.1.562.2.4.1.90.7.210.1.2
This variable is used to control the addition and deletion of individual values of the x25DteRgLTPlcnTable.
OBJECT-TYPE    
  RowStatus  

x25DteRgLtPeerTable 1.3.6.1.4.1.562.2.4.1.90.7.211
This attribute gives a list of links to Peer components. The set of all Peer and PermLcn components which link to a given RemoteGroup determine the subset of remote hosts which are accessible to a particular Protocol Port (and ultimately a Virtual Router).
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteRgLtPeerEntry

x25DteRgLtPeerEntry 1.3.6.1.4.1.562.2.4.1.90.7.211.1
An entry in the x25DteRgLtPeerTable.
OBJECT-TYPE    
  X25DteRgLtPeerEntry  

x25DteRgLtPeerValue 1.3.6.1.4.1.562.2.4.1.90.7.211.1.1
This variable represents both the value and the index for the x25DteRgLtPeerTable.
OBJECT-TYPE    
  Link  

x25DteRgLtPeerRowStatus 1.3.6.1.4.1.562.2.4.1.90.7.211.1.2
This variable is used to control the addition and deletion of individual values of the x25DteRgLtPeerTable.
OBJECT-TYPE    
  RowStatus  

x25DteRgLcnTable 1.3.6.1.4.1.562.2.4.1.90.7.212
This attribute lists the Lcn components for the X25Dte, which belong to this RemoteGroup. There is an Lcn component listed here for every lcn connection belonging to this RemoteGroup. The lcns were established using either a Peer component linked to this RemoteGroup (in response to a switched call) or using a PermLcn component linked to this RemoteGroup (a permanent connection).
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteRgLcnEntry

x25DteRgLcnEntry 1.3.6.1.4.1.562.2.4.1.90.7.212.1
An entry in the x25DteRgLcnTable.
OBJECT-TYPE    
  X25DteRgLcnEntry  

x25DteRgLcnValue 1.3.6.1.4.1.562.2.4.1.90.7.212.1.1
This variable represents both the value and the index for the x25DteRgLcnTable.
OBJECT-TYPE    
  Integer32 1..4095  

x25DteCidDataTable 1.3.6.1.4.1.562.2.4.1.90.20
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteCidDataEntry

x25DteCidDataEntry 1.3.6.1.4.1.562.2.4.1.90.20.1
An entry in the x25DteCidDataTable.
OBJECT-TYPE    
  X25DteCidDataEntry  

x25DteCustomerIdentifier 1.3.6.1.4.1.562.2.4.1.90.20.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

x25DteIfTable 1.3.6.1.4.1.562.2.4.1.90.21
This group provides the administrative set of parameters for the X.25 interface.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteIfEntry

x25DteIfEntry 1.3.6.1.4.1.562.2.4.1.90.21.1
An entry in the x25DteIfTable.
OBJECT-TYPE    
  X25DteIfEntry  

x25DteInterfaceMode 1.3.6.1.4.1.562.2.4.1.90.21.1.1
This attribute specifies the packet mode in which the X.25 interface operates. When this attribute is set to dte, interface on the other side of the physical link must be configured as a dce.
OBJECT-TYPE    
  INTEGER dte(1), dce(2)  

x25DteMaxActiveChannels 1.3.6.1.4.1.562.2.4.1.90.21.1.2
This attribute specifies the maximum number of channels that can be active on this interface including the Permanent Lcns and the Switched Lcns. In total maxActiveChannel will determine the maximum number of Lcn components which may exist at a given time. This should be set to a value greater or equal to the numberOfPLcn provisioned.
OBJECT-TYPE    
  Unsigned32 0..4095  

x25DteNumberOfPLcn 1.3.6.1.4.1.562.2.4.1.90.21.1.3
This attribute specifies the number of Permanent Logical Channels that are supported on this X.25 interface (that is, the number of PermLcn components that may be provisioned at this interface). The PermLcn components use channel numbers starting from 1 and up to lowestILChannelNumber. A value of 0 for this attribute indicates that no Permanent Logical channels are supported on this X.25 interface.
OBJECT-TYPE    
  Unsigned32 0..4095  

x25DtePacketSequencing 1.3.6.1.4.1.562.2.4.1.90.21.1.4
This attribute specifies the sequence numbering of packets for the X.25 interface. The value of this attribute must be the same as the packet sequencing configured at the X.25 interface on the other side of the physical link.
OBJECT-TYPE    
  INTEGER modulo8(1), modulo128(2)  

x25DteT20RestartTimer 1.3.6.1.4.1.562.2.4.1.90.21.1.5
This attribute provides the period in milliseconds within which a restart request packet should be confirmed.
OBJECT-TYPE    
  Unsigned32 1000..65536000  

x25DteT21CallTimer 1.3.6.1.4.1.562.2.4.1.90.21.1.6
This attribute provides the period in milliseconds within which a call request packet should be confirmed.
OBJECT-TYPE    
  Unsigned32 1000..65536000  

x25DteT22ResetTimer 1.3.6.1.4.1.562.2.4.1.90.21.1.7
This attribute provides the period in milliseconds within which a reset request packet should be confirmed.
OBJECT-TYPE    
  Unsigned32 1000..65536000  

x25DteT23ClearTimer 1.3.6.1.4.1.562.2.4.1.90.21.1.8
This attribute provides the period in milliseconds within which a clear request packet should be confirmed.
OBJECT-TYPE    
  Unsigned32 1000..65536000  

x25DteLcnCTable 1.3.6.1.4.1.562.2.4.1.90.22
This group contains the provisionable attributes for the Logical Channel configuration of the X.25 Interface. The logical channel range table is ordered as follows: Permanent Logical Channels(PLC), One-way Incoming Channels (IC), Two-way Channels(TC) and One-way Outgoing Channels (OC), in a consecutive manner.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteLcnCEntry

x25DteLcnCEntry 1.3.6.1.4.1.562.2.4.1.90.22.1
An entry in the x25DteLcnCTable.
OBJECT-TYPE    
  X25DteLcnCEntry  

x25DteLowestILChannelNumber 1.3.6.1.4.1.562.2.4.1.90.22.1.1
This attribute specifies the lowest Lcn number of the One-way Incoming Channel range for this X.25 interface. The value for this attribute must be greater than the numberOfPLcn attribute.
OBJECT-TYPE    
  Unsigned32 0..4095  

x25DteHighestILChannelNumber 1.3.6.1.4.1.562.2.4.1.90.22.1.2
This attribute specifies the highest Lcn number of the One-way Incoming Channel range for this X.25 interface. A value of 0 indicates that there are no channels in this range.
OBJECT-TYPE    
  Unsigned32 0..4095  

x25DteLowestTLChannelNumber 1.3.6.1.4.1.562.2.4.1.90.22.1.3
This attribute specifies the lowest Lcn number of the Two-way Channel range for this X.25 interface. The value for this attribute must be greater than the highestILChannelNumber attribute.
OBJECT-TYPE    
  Unsigned32 0..4095  

x25DteHighestTLChannelNumber 1.3.6.1.4.1.562.2.4.1.90.22.1.4
This attribute specifies the highest Lcn number of the Two-way Channel range for this X.25 interface. A value of 0 indicates that there are no channels in this range.
OBJECT-TYPE    
  Unsigned32 0..4095  

x25DteLowestOLChannelNumber 1.3.6.1.4.1.562.2.4.1.90.22.1.5
This attribute specifies the lowest Lcn number of the One-way Outgoing Channel range for this X.25 interface. The value for this attribute must be greater than the highestTLChannelNumber attribute.
OBJECT-TYPE    
  Unsigned32 0..4095  

x25DteHighestOLChannelNumber 1.3.6.1.4.1.562.2.4.1.90.22.1.6
This attribute specifies the highest Lcn number of the One-way Outgoing Channel range for this X.25 interface. A value of 0 indicates that there are no channels in this range.
OBJECT-TYPE    
  Unsigned32 0..4095  

x25DteDcpTable 1.3.6.1.4.1.562.2.4.1.90.23
This group contains the provisionable attributes giving the default call parameters used by all the logical channels during call setup. It is possible that different default call parameters will be used for a particular call, based on the Peer component for the given call. The actual call parameters operational for a given call are found in the Lcn component.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteDcpEntry

x25DteDcpEntry 1.3.6.1.4.1.562.2.4.1.90.23.1
An entry in the x25DteDcpTable.
OBJECT-TYPE    
  X25DteDcpEntry  

x25DteInPacketSize 1.3.6.1.4.1.562.2.4.1.90.23.1.1
This attribute specifies the maximum receive packet size in octets for the X.25 interface.
OBJECT-TYPE    
  Unsigned32 16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096  

x25DteOutPacketSize 1.3.6.1.4.1.562.2.4.1.90.23.1.2
This attribute specifies the maximum transmit packet size in octets for the X.25 interface.
OBJECT-TYPE    
  Unsigned32 16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096  

x25DteInWindowSize 1.3.6.1.4.1.562.2.4.1.90.23.1.3
This attribute specifies the maximum receive window size for the X.25 interface. A window size greater than 7 is only valid when the packetSequencing attribute is set to modulo128.
OBJECT-TYPE    
  Unsigned32 1..127  

x25DteOutWindowSize 1.3.6.1.4.1.562.2.4.1.90.23.1.4
This attribute specifies the maximum transmit window size for the X.25 interface. A window size greater than 7 is only valid when the packetSequencing is set to modulo128.
OBJECT-TYPE    
  Unsigned32 1..127  

x25DteAcceptReverseCharging 1.3.6.1.4.1.562.2.4.1.90.23.1.5
This attribute specifies whether local end will accept or refuse charges for a call. A value of neverAccept is only used at the X.25 interface level and indicates that this interface will never accept reverse charging (that is no Peer component can override this parameter, allowing reverse charged calls to be accepted).
OBJECT-TYPE    
  INTEGER accept(2), refuse(3), neverAccept(4)  

x25DteProposeReverseCharging 1.3.6.1.4.1.562.2.4.1.90.23.1.6
This attribute specifies whether local/reverse charging is signalled in the call request packet.
OBJECT-TYPE    
  INTEGER reverse(2), local(3)  

x25DteOutThroughputClassSize 1.3.6.1.4.1.562.2.4.1.90.23.1.8
This attribute specifies the value of the transmit throughput class to be negotiated. A value of notSpecified means the facility is not signalled.
OBJECT-TYPE    
  INTEGER n75(3), n150(4), n300(5), n600(6), n1200(7), n2400(8), n4800(9), n9600(10), n19200(11), n48000(12), n64000(13), notSpecified(17)  

x25DteInThroughputClassSize 1.3.6.1.4.1.562.2.4.1.90.23.1.9
This attribute specifies the value of the receive throughput class to be negotiated. A value of notSpecified means the facility is not signalled.
OBJECT-TYPE    
  INTEGER n75(3), n150(4), n300(5), n600(6), n1200(7), n2400(8), n4800(9), n9600(10), n19200(11), n48000(12), n64000(13), notSpecified(17)  

x25DteCugIndex 1.3.6.1.4.1.562.2.4.1.90.23.1.10
This attribute specifies the index of the Closed User Group facility to signal. The index consists of two or four octets each representing a digit in the range of 0 to 9. A value of null (empty string) at the X.25 interface means no CUG facility is signalled. If a cugIndex is provisioned to be signalled, the cugoaIndex attribute must be null.
OBJECT-TYPE    
  AsciiString SIZE(0..4)  

x25DteCugoaIndex 1.3.6.1.4.1.562.2.4.1.90.23.1.11
This attribute specifies the index of the Close User Group with Outgoing Access facility to signal. The index consists of two or four octets each representing a digit in the range of 0 to 9. A value of null (empty string) at the X.25 interface means no CUGOA facility is signalled. If a cugoaIndex is provisioned to be signalled, the cugIndex attribute must be null.
OBJECT-TYPE    
  AsciiString SIZE(0..4)  

x25DteChargingInformation 1.3.6.1.4.1.562.2.4.1.90.23.1.13
This attribute specifies whether the charging information facility is to be signalled in a call request packet. A value of notSpecified means the facility is not signalled. A value of notRequested means the facility is signalled but charging information is not requested (that is, the charging info field of the facility is set Off). A value of requested means the facility is signalled to explicitly request charging information.
OBJECT-TYPE    
  INTEGER notSpecified(2), notRequested(3), requested(4)  

x25DteRpoa 1.3.6.1.4.1.562.2.4.1.90.23.1.14
This attribute specifies the value of the RPOA facility to signal in a call request packet. The value of null (empty string) at the X.25 interface means no RPOA facility is signalled.
OBJECT-TYPE    
  AsciiString SIZE(0..108)  

x25DteTrnstDlySlctnAInd 1.3.6.1.4.1.562.2.4.1.90.23.1.15
This attribute specifies the value of the Transit Delay Selection and Indication facility to signal in a call request packet. A value of 65536 at the X.25 interface level means no TDSAI facility is signalled.
OBJECT-TYPE    
  Unsigned32 0..65536  

x25DteCallingNetworkFax 1.3.6.1.4.1.562.2.4.1.90.23.1.24
This attribute specifies the Calling Network facilities to be signalled in a call request packet. A value of null (empty string) at the X.25 interface means no facilities are signalled.
OBJECT-TYPE    
  HexString SIZE(0..108)  

x25DteCalledNetworkFax 1.3.6.1.4.1.562.2.4.1.90.23.1.25
This attribute specifies the called network facilities to be signalled in a call request packet. A value of null (empty string) at the X.25 interface means no facilities are signalled.
OBJECT-TYPE    
  HexString SIZE(0..108)  

x25DteCallUserData 1.3.6.1.4.1.562.2.4.1.90.23.1.26
This attribute specifies the user data to be signalled in the call request packet. A value of null (empty string) means no user data is signalled.
OBJECT-TYPE    
  HexString SIZE(0..128)  

x25DteIfEntryTable 1.3.6.1.4.1.562.2.4.1.90.24
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteIfEntryEntry

x25DteIfEntryEntry 1.3.6.1.4.1.562.2.4.1.90.24.1
An entry in the x25DteIfEntryTable.
OBJECT-TYPE    
  X25DteIfEntryEntry  

x25DteIfAdminStatus 1.3.6.1.4.1.562.2.4.1.90.24.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

x25DteIfIndex 1.3.6.1.4.1.562.2.4.1.90.24.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

x25DteStateTable 1.3.6.1.4.1.562.2.4.1.90.25
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteStateEntry

x25DteStateEntry 1.3.6.1.4.1.562.2.4.1.90.25.1
An entry in the x25DteStateTable.
OBJECT-TYPE    
  X25DteStateEntry  

x25DteAdminState 1.3.6.1.4.1.562.2.4.1.90.25.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

x25DteOperationalState 1.3.6.1.4.1.562.2.4.1.90.25.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

x25DteUsageState 1.3.6.1.4.1.562.2.4.1.90.25.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

x25DteOperStatusTable 1.3.6.1.4.1.562.2.4.1.90.26
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteOperStatusEntry

x25DteOperStatusEntry 1.3.6.1.4.1.562.2.4.1.90.26.1
An entry in the x25DteOperStatusTable.
OBJECT-TYPE    
  X25DteOperStatusEntry  

x25DteSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.90.26.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

x25DteOpTable 1.3.6.1.4.1.562.2.4.1.90.27
This group contains the operational status of the X.25 interface.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteOpEntry

x25DteOpEntry 1.3.6.1.4.1.562.2.4.1.90.27.1
An entry in the x25DteOpTable.
OBJECT-TYPE    
  X25DteOpEntry  

x25DteInterfaceState 1.3.6.1.4.1.562.2.4.1.90.27.1.1
This attribute specifies the state of the interface. The notReady state, is the initial state of the service, when it is being initialized. The localRestarting state is entered when a Restart packet is sent to the link and the interface is waiting for a response. The remoteRestarting state is entered when a Restart packet is received from the link, and is being processed. In ready state, the service is operational and ready to provide service.
OBJECT-TYPE    
  INTEGER notReady(0), localRestarting(1), remoteRestarting(2), ready(3)  

x25DteStatsTable 1.3.6.1.4.1.562.2.4.1.90.28
This component contains the statistics for the X.25 interface.
OBJECT-TYPE    
  SEQUENCE OF  
    X25DteStatsEntry

x25DteStatsEntry 1.3.6.1.4.1.562.2.4.1.90.28.1
An entry in the x25DteStatsTable.
OBJECT-TYPE    
  X25DteStatsEntry  

x25DteInCalls 1.3.6.1.4.1.562.2.4.1.90.28.1.1
This attribute counts the number of call packets received from link.
OBJECT-TYPE    
  Counter32  

x25DteInCallRefusals 1.3.6.1.4.1.562.2.4.1.90.28.1.2
This attribute counts the number of calls received from the link which have been cleared. This includes calls cleared by the X.25 interface and calls cleared by the higher level.
OBJECT-TYPE    
  Counter32  

x25DteInPrvdrInitiatedClrs 1.3.6.1.4.1.562.2.4.1.90.28.1.3
This attribute counts the number of clear packets received from the link with a cause code other than DTE initiated.
OBJECT-TYPE    
  Counter32  

x25DteInRmtInitiatedRsts 1.3.6.1.4.1.562.2.4.1.90.28.1.4
This attribute counts the number of reset packets received from the link with the cause code DTE initiated.
OBJECT-TYPE    
  Counter32  

x25DteInPrvdrInitiatedRsts 1.3.6.1.4.1.562.2.4.1.90.28.1.5
This attribute counts the number of reset packets received from the link with the cause code other than DTE initiated.
OBJECT-TYPE    
  Counter32  

x25DteInRestarts 1.3.6.1.4.1.562.2.4.1.90.28.1.6
This attribute counts the number of restart packets received from the link while the service is in ready state.
OBJECT-TYPE    
  Counter32  

x25DteInDataPackets 1.3.6.1.4.1.562.2.4.1.90.28.1.7
This attribute counts the number of data packets received from link.
OBJECT-TYPE    
  Counter32  

x25DteInPktsAcusdOfPrtclErr 1.3.6.1.4.1.562.2.4.1.90.28.1.8
This attribute counts the number of clear, reset, restart and diagnostic packets received from link containing a procedure error cause code.
OBJECT-TYPE    
  Counter32  

x25DteInInterruptPackets 1.3.6.1.4.1.562.2.4.1.90.28.1.9
This attributes counts the number of interrupt packets received from link.
OBJECT-TYPE    
  Counter32  

x25DteOutCallAttempts 1.3.6.1.4.1.562.2.4.1.90.28.1.10
This attribute counts the number of call packets sent from this interface.
OBJECT-TYPE    
  Counter32  

x25DteOutCallFailures 1.3.6.1.4.1.562.2.4.1.90.28.1.11
This attribute counts the number of call attempts from this interface that failed. This includes calls that were cleared because of restrictive fast select.
OBJECT-TYPE    
  Counter32  

x25DteOutInterruptPackets 1.3.6.1.4.1.562.2.4.1.90.28.1.12
This attribute counts the number of interrupt packets sent to the link.
OBJECT-TYPE    
  Counter32  

x25DteOutDataPackets 1.3.6.1.4.1.562.2.4.1.90.28.1.13
This attribute counts the number of data packets sent to the link.
OBJECT-TYPE    
  Counter32  

x25DteOutActiveChannels 1.3.6.1.4.1.562.2.4.1.90.28.1.14
This attribute indicates the number of One-way Outgoing Channels that are currently in use. This counter includes the call requests that have not been accepted.
OBJECT-TYPE    
  Counter32  

x25DteInActiveChannels 1.3.6.1.4.1.562.2.4.1.90.28.1.15
This attribute indicates number of One-way Incoming Channels that are currently active.
OBJECT-TYPE    
  Counter32  

x25DteTwowayActiveChannels 1.3.6.1.4.1.562.2.4.1.90.28.1.16
This attribute indicates the number of Two-way Channels that are in use. This includes call requests sent but not yet accepted.
OBJECT-TYPE    
  Counter32  

x25DteT20RestartTimeouts 1.3.6.1.4.1.562.2.4.1.90.28.1.17
This attribute counts the number of times the T20 restart timer has expired.
OBJECT-TYPE    
  Counter32  

x25DteT21CallTimeouts 1.3.6.1.4.1.562.2.4.1.90.28.1.18
This attribute counts the number of times the T21 call timer has expired.
OBJECT-TYPE    
  Counter32  

x25DteT22ResetTimeouts 1.3.6.1.4.1.562.2.4.1.90.28.1.19
This attribute counts the number of times the T22 reset timer has expired.
OBJECT-TYPE    
  Counter32  

x25DteT23ClearTimeouts 1.3.6.1.4.1.562.2.4.1.90.28.1.20
This attribute counts the number of times the T23 clear timer has expired.
OBJECT-TYPE    
  Counter32  

x25DteMIB 1.3.6.1.4.1.562.2.4.2.48
OBJECT IDENTIFIER    

x25DteGroup 1.3.6.1.4.1.562.2.4.2.48.1
OBJECT IDENTIFIER    

x25DteGroupBE 1.3.6.1.4.1.562.2.4.2.48.1.5
OBJECT IDENTIFIER    

x25DteGroupBE00 1.3.6.1.4.1.562.2.4.2.48.1.5.1
OBJECT IDENTIFIER    

x25DteGroupBE00A 1.3.6.1.4.1.562.2.4.2.48.1.5.1.2
OBJECT IDENTIFIER    

x25DteCapabilities 1.3.6.1.4.1.562.2.4.2.48.3
OBJECT IDENTIFIER    

x25DteCapabilitiesBE 1.3.6.1.4.1.562.2.4.2.48.3.5
OBJECT IDENTIFIER    

x25DteCapabilitiesBE00 1.3.6.1.4.1.562.2.4.2.48.3.5.1
OBJECT IDENTIFIER    

x25DteCapabilitiesBE00A 1.3.6.1.4.1.562.2.4.2.48.3.5.1.2
OBJECT IDENTIFIER    

Defined Objects

X25DteRowStatusEntry  
SEQUENCE    
  RowStatus as x25DteRowStatus  
  DisplayString as x25DteComponentName  
  StorageType as x25DteStorageType  
  Integer32 as x25DteIndex  

X25DteCidDataEntry  
SEQUENCE    
  Unsigned32 as x25DteCustomerIdentifier  

X25DteIfEntry  
SEQUENCE    
  INTEGER as x25DteInterfaceMode  
  Unsigned32 as x25DteMaxActiveChannels  
  Unsigned32 as x25DteNumberOfPLcn  
  INTEGER as x25DtePacketSequencing  
  Unsigned32 as x25DteT20RestartTimer  
  Unsigned32 as x25DteT21CallTimer  
  Unsigned32 as x25DteT22ResetTimer  
  Unsigned32 as x25DteT23ClearTimer  

X25DteLcnCEntry  
SEQUENCE    
  Unsigned32 as x25DteLowestILChannelNumber  
  Unsigned32 as x25DteHighestILChannelNumber  
  Unsigned32 as x25DteLowestTLChannelNumber  
  Unsigned32 as x25DteHighestTLChannelNumber  
  Unsigned32 as x25DteLowestOLChannelNumber  
  Unsigned32 as x25DteHighestOLChannelNumber  

X25DteDcpEntry  
SEQUENCE    
  Unsigned32 as x25DteInPacketSize  
  Unsigned32 as x25DteOutPacketSize  
  Unsigned32 as x25DteInWindowSize  
  Unsigned32 as x25DteOutWindowSize  
  INTEGER as x25DteAcceptReverseCharging  
  INTEGER as x25DteProposeReverseCharging  
  INTEGER as x25DteOutThroughputClassSize  
  INTEGER as x25DteInThroughputClassSize  
  AsciiString as x25DteCugIndex  
  AsciiString as x25DteCugoaIndex  
  INTEGER as x25DteChargingInformation  
  AsciiString as x25DteRpoa  
  Unsigned32 as x25DteTrnstDlySlctnAInd  
  HexString as x25DteCallingNetworkFax  
  HexString as x25DteCalledNetworkFax  
  HexString as x25DteCallUserData  

X25DteIfEntryEntry  
SEQUENCE    
  INTEGER as x25DteIfAdminStatus  
  InterfaceIndex as x25DteIfIndex  

X25DteStateEntry  
SEQUENCE    
  INTEGER as x25DteAdminState  
  INTEGER as x25DteOperationalState  
  INTEGER as x25DteUsageState  

X25DteOperStatusEntry  
SEQUENCE    
  INTEGER as x25DteSnmpOperStatus  

X25DteOpEntry  
SEQUENCE    
  INTEGER as x25DteInterfaceState  

X25DteStatsEntry  
SEQUENCE    
  Counter32 as x25DteInCalls  
  Counter32 as x25DteInCallRefusals  
  Counter32 as x25DteInPrvdrInitiatedClrs  
  Counter32 as x25DteInRmtInitiatedRsts  
  Counter32 as x25DteInPrvdrInitiatedRsts  
  Counter32 as x25DteInRestarts  
  Counter32 as x25DteInDataPackets  
  Counter32 as x25DteInPktsAcusdOfPrtclErr  
  Counter32 as x25DteInInterruptPackets  
  Counter32 as x25DteOutCallAttempts  
  Counter32 as x25DteOutCallFailures  
  Counter32 as x25DteOutInterruptPackets  
  Counter32 as x25DteOutDataPackets  
  Counter32 as x25DteOutActiveChannels  
  Counter32 as x25DteInActiveChannels  
  Counter32 as x25DteTwowayActiveChannels  
  Counter32 as x25DteT20RestartTimeouts  
  Counter32 as x25DteT21CallTimeouts  
  Counter32 as x25DteT22ResetTimeouts  
  Counter32 as x25DteT23ClearTimeouts  

X25DtePeerRowStatusEntry  
SEQUENCE    
  RowStatus as x25DtePeerRowStatus  
  DisplayString as x25DtePeerComponentName  
  StorageType as x25DtePeerStorageType  
  Integer32 as x25DtePeerIndex  

X25DtePeerIfEntry  
SEQUENCE    
  INTEGER as x25DtePeerEncAddressType  
  AsciiString as x25DtePeerEncAddress  
  DigitString as x25DtePeerX25Address  
  Link as x25DtePeerLinkToRemoteGroup  

X25DtePeerCpEntry  
SEQUENCE    
  Unsigned32 as x25DtePeerInPacketSize  
  Unsigned32 as x25DtePeerOutPacketSize  
  Unsigned32 as x25DtePeerInWindowSize  
  Unsigned32 as x25DtePeerOutWindowSize  
  INTEGER as x25DtePeerAcceptReverseCharging  
  INTEGER as x25DtePeerProposeReverseCharging  
  INTEGER as x25DtePeerOutThroughputClassSize  
  INTEGER as x25DtePeerInThroughputClassSize  
  AsciiString as x25DtePeerCugIndex  
  AsciiString as x25DtePeerCugoaIndex  
  HexString as x25DtePeerNetworkUserIdentifier  
  INTEGER as x25DtePeerChargingInformation  
  AsciiString as x25DtePeerRpoa  
  Unsigned32 as x25DtePeerTrnstDlySlctnAInd  
  HexString as x25DtePeerCallingNetworkFax  
  HexString as x25DtePeerCalledNetworkFax  
  HexString as x25DtePeerCallUserData  

X25DtePeerPEncEntry  
SEQUENCE    
  Integer32 as x25DtePeerPEncIndex  
  INTEGER as x25DtePeerPEncValue  
  RowStatus as x25DtePeerPEncRowStatus  

X25DtePeerLcnEntry  
SEQUENCE    
  Integer32 as x25DtePeerLcnValue  

X25DtePLcnRowStatusEntry  
SEQUENCE    
  RowStatus as x25DtePLcnRowStatus  
  DisplayString as x25DtePLcnComponentName  
  StorageType as x25DtePLcnStorageType  
  Integer32 as x25DtePLcnIndex  

X25DtePLcnProvEntry  
SEQUENCE    
  INTEGER as x25DtePLcnEncAddressType  
  AsciiString as x25DtePLcnEncAddress  
  INTEGER as x25DtePLcnProtocolEncType  
  Link as x25DtePLcnLinkToRemoteGroup  
  Unsigned32 as x25DtePLcnInPacketSize  
  Unsigned32 as x25DtePLcnOutPacketSize  
  Unsigned32 as x25DtePLcnInWindowSize  
  Unsigned32 as x25DtePLcnOutWindowSize  

X25DteLcnRowStatusEntry  
SEQUENCE    
  RowStatus as x25DteLcnRowStatus  
  DisplayString as x25DteLcnComponentName  
  StorageType as x25DteLcnStorageType  
  Integer32 as x25DteLcnIndex  

X25DteLcnStateEntry  
SEQUENCE    
  INTEGER as x25DteLcnAdminState  
  INTEGER as x25DteLcnOperationalState  
  INTEGER as x25DteLcnUsageState  

X25DteLcnCpEntry  
SEQUENCE    
  Unsigned32 as x25DteLcnInPacketSize  
  Unsigned32 as x25DteLcnOutPacketSize  
  Unsigned32 as x25DteLcnInWindowSize  
  Unsigned32 as x25DteLcnOutWindowSize  
  INTEGER as x25DteLcnProposeReverseCharging  
  INTEGER as x25DteLcnFastSelect  
  INTEGER as x25DteLcnOutThroughputClassSize  
  INTEGER as x25DteLcnInThroughputClassSize  
  AsciiString as x25DteLcnCugIndex  
  AsciiString as x25DteLcnCugoaIndex  
  HexString as x25DteLcnNetworkUserIdentifier  
  INTEGER as x25DteLcnChargingInformation  
  AsciiString as x25DteLcnRpoa  
  Unsigned32 as x25DteLcnTrnstDlySlctnAInd  
  HexString as x25DteLcnCallingNetworkFax  
  HexString as x25DteLcnCalledNetworkFax  
  HexString as x25DteLcnCallUserData  

X25DteLcnLcnStatusEntry  
SEQUENCE    
  INTEGER as x25DteLcnStatus  
  INTEGER as x25DteLcnCallDirection  
  DigitString as x25DteLcnCalledAddress  
  DigitString as x25DteLcnCallingAddress  
  DigitString as x25DteLcnOriginalCalledAddress  

X25DteLcnStatsEntry  
SEQUENCE    
  Counter32 as x25DteLcnInUknownProtocols  
  Counter32 as x25DteLcnInDataOctets  
  Counter32 as x25DteLcnInDataPackets  
  Counter32 as x25DteLcnInRmtInitiatedRsts  
  Counter32 as x25DteLcnInPrvdrInitiatedRsts  
  Counter32 as x25DteLcnInInterruptPackets  
  Counter32 as x25DteLcnOutDataOctets  
  Counter32 as x25DteLcnOutDataPackets  
  Counter32 as x25DteLcnOutInterruptPackets  
  Counter32 as x25DteLcnT22ResetTimeouts  

X25DteLapbRowStatusEntry  
SEQUENCE    
  RowStatus as x25DteLapbRowStatus  
  DisplayString as x25DteLapbComponentName  
  StorageType as x25DteLapbStorageType  
  NonReplicated as x25DteLapbIndex  

X25DteLapbCpEntry  
SEQUENCE    
  INTEGER as x25DteLapbStationType  
  INTEGER as x25DteLapbFrameSequencing  
  Unsigned32 as x25DteLapbN1FrameSize  
  Unsigned32 as x25DteLapbKWindowSize  
  Unsigned32 as x25DteLapbN2TransmitLimit  
  Unsigned32 as x25DteLapbT1AckTimer  
  Unsigned32 as x25DteLapbT2AckDelayTimer  
  Unsigned32 as x25DteLapbT4IdleProbeTimer  
  INTEGER as x25DteLapbActionInitiate  
  INTEGER as x25DteLapbActionRecvDM  
  Unsigned32 as x25DteLapbTxQDegradeThreshold  
  Unsigned32 as x25DteLapbTxQResetThreshold  

X25DteLapbStateEntry  
SEQUENCE    
  INTEGER as x25DteLapbAdminState  
  INTEGER as x25DteLapbOperationalState  
  INTEGER as x25DteLapbUsageState  

X25DteLapbStatusEntry  
SEQUENCE    
  INTEGER as x25DteLapbCurrentState  
  INTEGER as x25DteLapbLastStateChangeReason  
  HexString as x25DteLapbFrmrTransmit  
  HexString as x25DteLapbFrmrReceive  
  Unsigned32 as x25DteLapbCurrentQueueSize  

X25DteLapbStatsEntry  
SEQUENCE    
  Counter32 as x25DteLapbStateChanges  
  Counter32 as x25DteLapbRemoteBusy  
  Counter32 as x25DteLapbTransmitRejectFrames  
  Counter32 as x25DteLapbReceiveRejectFrames  
  Counter32 as x25DteLapbT1AckTimeout  

X25DteLapbFramerRowStatusEntry  
SEQUENCE    
  RowStatus as x25DteLapbFramerRowStatus  
  DisplayString as x25DteLapbFramerComponentName  
  StorageType as x25DteLapbFramerStorageType  
  NonReplicated as x25DteLapbFramerIndex  

X25DteLapbFramerProvEntry  
SEQUENCE    
  Link as x25DteLapbFramerInterfaceName  

X25DteLapbFramerLinkEntry  
SEQUENCE    
  Unsigned32 as x25DteLapbFramerFlagsBetweenFrames  

X25DteLapbFramerStateEntry  
SEQUENCE    
  INTEGER as x25DteLapbFramerAdminState  
  INTEGER as x25DteLapbFramerOperationalState  
  INTEGER as x25DteLapbFramerUsageState  

X25DteLapbFramerStatsEntry  
SEQUENCE    
  Counter32 as x25DteLapbFramerFrmToIf  
  Counter32 as x25DteLapbFramerFrmFromIf  
  Counter32 as x25DteLapbFramerOctetFromIf  
  Counter32 as x25DteLapbFramerAborts  
  Counter32 as x25DteLapbFramerCrcErrors  
  Counter32 as x25DteLapbFramerLrcErrors  
  Counter32 as x25DteLapbFramerNonOctetErrors  
  Counter32 as x25DteLapbFramerOverruns  
  Counter32 as x25DteLapbFramerUnderruns  

X25DteLapbFramerUtilEntry  
SEQUENCE    
  Gauge32 as x25DteLapbFramerNormPrioLinkUtilToIf  
  Gauge32 as x25DteLapbFramerNormPrioLinkUtilFromIf  

X25DtePleRowStatusEntry  
SEQUENCE    
  RowStatus as x25DtePleRowStatus  
  DisplayString as x25DtePleComponentName  
  StorageType as x25DtePleStorageType  
  NonReplicated as x25DtePleIndex  

X25DtePleProvEntry  
SEQUENCE    
  Unsigned32 as x25DtePleInactivityTimer  

X25DtePleOpEntry  
SEQUENCE    
  Unsigned32 as x25DtePleEncAddrToX25LkupFlrs  
  HexString as x25DtePleLastFailedEncAddr  
  Unsigned32 as x25DtePleX25AddrToEncLkupFlrs  
  DigitString as x25DtePleLastFailedX25Addr  

X25DteRgRowStatusEntry  
SEQUENCE    
  RowStatus as x25DteRgRowStatus  
  DisplayString as x25DteRgComponentName  
  StorageType as x25DteRgStorageType  
  Integer32 as x25DteRgIndex  

X25DteRgIfEntryEntry  
SEQUENCE    
  INTEGER as x25DteRgIfAdminStatus  
  InterfaceIndex as x25DteRgIfIndex  

X25DteRgProvEntry  
SEQUENCE    
  Link as x25DteRgLinkToProtocolPort  
  DigitString as x25DteRgLocalAddress  
  Unsigned32 as x25DteRgMtuSize  

X25DteRgStateEntry  
SEQUENCE    
  INTEGER as x25DteRgAdminState  
  INTEGER as x25DteRgOperationalState  
  INTEGER as x25DteRgUsageState  

X25DteRgOperStatusEntry  
SEQUENCE    
  INTEGER as x25DteRgSnmpOperStatus  

X25DteRgLTPlcnEntry  
SEQUENCE    
  Link as x25DteRgLTPlcnValue  
  RowStatus as x25DteRgLTPlcnRowStatus  

X25DteRgLtPeerEntry  
SEQUENCE    
  Link as x25DteRgLtPeerValue  
  RowStatus as x25DteRgLtPeerRowStatus  

X25DteRgLcnEntry  
SEQUENCE    
  Integer32 as x25DteRgLcnValue