Nortel-Magellan-Passport-X25TraceRcvrMIB

File: Nortel-Magellan-Passport-X25TraceRcvrMIB.mib (71661 bytes)

Imported modules

RFC-1212 Nortel-Magellan-Passport-UsefulDefinitionsMIB Nortel-Magellan-Passport-StandardTextualConventionsMIB
Nortel-Magellan-Passport-TextualConventionsMIB Nortel-Magellan-Passport-TraceBaseMIB

Imported symbols

OBJECT-TYPE passportMIBs DisplayString
StorageType RowStatus Integer32
Unsigned32 Hex NonReplicated
HexString EnterpriseDateAndTime DigitString
traceSessionIndex traceRcvrIndex traceSession
traceIndex traceRcvr

Defined Objects

traceRcvrX25 1.3.6.1.4.1.562.2.4.1.106.2.2
OBJECT IDENTIFIER    

traceRcvrX25RowStatusTable 1.3.6.1.4.1.562.2.4.1.106.2.2.1
This entry controls the addition and deletion of traceRcvrX25 components.
OBJECT-TYPE    
  SEQUENCE OF  
    TraceRcvrX25RowStatusEntry

traceRcvrX25RowStatusEntry 1.3.6.1.4.1.562.2.4.1.106.2.2.1.1
A single entry in the table represents a single traceRcvrX25 component.
OBJECT-TYPE    
  TraceRcvrX25RowStatusEntry  

traceRcvrX25RowStatus 1.3.6.1.4.1.562.2.4.1.106.2.2.1.1.1
This variable is used as the basis for SNMP naming of traceRcvrX25 components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

traceRcvrX25ComponentName 1.3.6.1.4.1.562.2.4.1.106.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

traceRcvrX25StorageType 1.3.6.1.4.1.562.2.4.1.106.2.2.1.1.4
This variable represents the storage type value for the traceRcvrX25 tables.
OBJECT-TYPE    
  StorageType  

traceRcvrX25Index 1.3.6.1.4.1.562.2.4.1.106.2.2.1.1.10
This variable represents the index for the traceRcvrX25 tables.
OBJECT-TYPE    
  NonReplicated  

traceRcvrX25Dna 1.3.6.1.4.1.562.2.4.1.106.2.2.2
OBJECT IDENTIFIER    

traceRcvrX25DnaRowStatusTable 1.3.6.1.4.1.562.2.4.1.106.2.2.2.1
This entry controls the addition and deletion of traceRcvrX25Dna components.
OBJECT-TYPE    
  SEQUENCE OF  
    TraceRcvrX25DnaRowStatusEntry

traceRcvrX25DnaRowStatusEntry 1.3.6.1.4.1.562.2.4.1.106.2.2.2.1.1
A single entry in the table represents a single traceRcvrX25Dna component.
OBJECT-TYPE    
  TraceRcvrX25DnaRowStatusEntry  

traceRcvrX25DnaRowStatus 1.3.6.1.4.1.562.2.4.1.106.2.2.2.1.1.1
This variable is used as the basis for SNMP naming of traceRcvrX25Dna components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

traceRcvrX25DnaComponentName 1.3.6.1.4.1.562.2.4.1.106.2.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

traceRcvrX25DnaStorageType 1.3.6.1.4.1.562.2.4.1.106.2.2.2.1.1.4
This variable represents the storage type value for the traceRcvrX25Dna tables.
OBJECT-TYPE    
  StorageType  

traceRcvrX25DnaIndex 1.3.6.1.4.1.562.2.4.1.106.2.2.2.1.1.10
This variable represents the index for the traceRcvrX25Dna tables.
OBJECT-TYPE    
  NonReplicated  

traceRcvrX25DnaCug 1.3.6.1.4.1.562.2.4.1.106.2.2.2.2
OBJECT IDENTIFIER    

traceRcvrX25DnaCugRowStatusTable 1.3.6.1.4.1.562.2.4.1.106.2.2.2.2.1
This entry controls the addition and deletion of traceRcvrX25DnaCug components.
OBJECT-TYPE    
  SEQUENCE OF  
    TraceRcvrX25DnaCugRowStatusEntry

traceRcvrX25DnaCugRowStatusEntry 1.3.6.1.4.1.562.2.4.1.106.2.2.2.2.1.1
A single entry in the table represents a single traceRcvrX25DnaCug component.
OBJECT-TYPE    
  TraceRcvrX25DnaCugRowStatusEntry  

traceRcvrX25DnaCugRowStatus 1.3.6.1.4.1.562.2.4.1.106.2.2.2.2.1.1.1
This variable is used as the basis for SNMP naming of traceRcvrX25DnaCug components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

traceRcvrX25DnaCugComponentName 1.3.6.1.4.1.562.2.4.1.106.2.2.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

traceRcvrX25DnaCugStorageType 1.3.6.1.4.1.562.2.4.1.106.2.2.2.2.1.1.4
This variable represents the storage type value for the traceRcvrX25DnaCug tables.
OBJECT-TYPE    
  StorageType  

traceRcvrX25DnaCugIndex 1.3.6.1.4.1.562.2.4.1.106.2.2.2.2.1.1.10
This variable represents the index for the traceRcvrX25DnaCug tables.
OBJECT-TYPE    
  Integer32 1..1  

traceRcvrX25DnaCugCugOptionsTable 1.3.6.1.4.1.562.2.4.1.106.2.2.2.2.10
Attributes in this group define ClosedUserGroup options associated with interlockCode. Dnas with the same CUG (interlockCode) can make calls within this group. Various combinations of attributes are defined under this option which permit or prevent calls in the same CUG group.
OBJECT-TYPE    
  SEQUENCE OF  
    TraceRcvrX25DnaCugCugOptionsEntry

traceRcvrX25DnaCugCugOptionsEntry 1.3.6.1.4.1.562.2.4.1.106.2.2.2.2.10.1
An entry in the traceRcvrX25DnaCugCugOptionsTable.
OBJECT-TYPE    
  TraceRcvrX25DnaCugCugOptionsEntry  

traceRcvrX25DnaCugType 1.3.6.1.4.1.562.2.4.1.106.2.2.2.2.10.1.1
This attribute specifies the CUG type as either national or international. A national CUG has significance within the local network only. An international CUG has significance across network boundaries.
OBJECT-TYPE    
  INTEGER national(0), international(1)  

traceRcvrX25DnaCugDnic 1.3.6.1.4.1.562.2.4.1.106.2.2.2.2.10.1.2
This attribute specifies the Data Network ID Code of the network that is administering the international CUG. This attribute is not used for a national CUG and should be left at its default value. The dnic value is not an arbitrary number. It is assigned by international agreement and controlled by ITU-T.
OBJECT-TYPE    
  DigitString SIZE(4)  

traceRcvrX25DnaCugInterlockCode 1.3.6.1.4.1.562.2.4.1.106.2.2.2.2.10.1.3
This attribute specifies a numeric identifier of a national or international closed user group. It is an arbitrary number. This attribute may also be called CUG in some descriptions. Dnas defined with this number can only make calls to Dnas defined with the same interlockCode.
OBJECT-TYPE    
  Unsigned32 0..65535  

traceRcvrX25DnaCugPreferential 1.3.6.1.4.1.562.2.4.1.106.2.2.2.2.10.1.4
This attribute specifies that this Cug is to be used on all outgoing calls to the X.25 trace receiver.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

traceRcvrX25DnaCugOutCalls 1.3.6.1.4.1.562.2.4.1.106.2.2.2.2.10.1.5
This attribute specifies that outgoing calls (from the DTE into the network) can be made using this particular Cug.
OBJECT-TYPE    
  INTEGER disallowed(0), allowed(1)  

traceRcvrX25DnaCugIncCalls 1.3.6.1.4.1.562.2.4.1.106.2.2.2.2.10.1.6
This attribute specifies that incoming calls (from the network to the DTE) cannot be accepted using this Cug.
OBJECT-TYPE    
  INTEGER disallowed(0), allowed(1)  

traceRcvrX25DnaCugPrivileged 1.3.6.1.4.1.562.2.4.1.106.2.2.2.2.10.1.7
This attribute specifies that this Cug is privileged. For a call between two closed user group Dnas to connect, at least one Dna must have a privileged Cug.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

traceRcvrX25DnaAddressTable 1.3.6.1.4.1.562.2.4.1.106.2.2.2.10
This group contains attributes common to all Dnas. This group is composed of two attributes which define a Dna. These attributes are used to interpret the format of the address digits.
OBJECT-TYPE    
  SEQUENCE OF  
    TraceRcvrX25DnaAddressEntry

traceRcvrX25DnaAddressEntry 1.3.6.1.4.1.562.2.4.1.106.2.2.2.10.1
An entry in the traceRcvrX25DnaAddressTable.
OBJECT-TYPE    
  TraceRcvrX25DnaAddressEntry  

traceRcvrX25DnaNumberingPlanIndicator 1.3.6.1.4.1.562.2.4.1.106.2.2.2.10.1.1
This attribute indicates the Numbering Plan Indicator (NPI) of the Dna that is entered. The address may belong to an E.164 or X.121 plan.
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

traceRcvrX25DnaDataNetworkAddress 1.3.6.1.4.1.562.2.4.1.106.2.2.2.10.1.2
The Dna attribute contains digits which form a unique identifier for the calling end of the trace connection. Dna digits are selected and assigned by network operators. The maximum Dna length is 15 digits.
OBJECT-TYPE    
  DigitString SIZE(1..15)  

traceRcvrX25DnaOutgoingOptionsTable 1.3.6.1.4.1.562.2.4.1.106.2.2.2.11
This group defines call options for outgoing calls.
OBJECT-TYPE    
  SEQUENCE OF  
    TraceRcvrX25DnaOutgoingOptionsEntry

traceRcvrX25DnaOutgoingOptionsEntry 1.3.6.1.4.1.562.2.4.1.106.2.2.2.11.1
An entry in the traceRcvrX25DnaOutgoingOptionsTable.
OBJECT-TYPE    
  TraceRcvrX25DnaOutgoingOptionsEntry  

traceRcvrX25DnaOutCalls 1.3.6.1.4.1.562.2.4.1.106.2.2.2.11.1.1
This attribute specifies that outgoing calls (from the DTE to the network) can be made using this particular Dna component.
OBJECT-TYPE    
  INTEGER disallowed(0), allowed(1)  

traceRcvrX25DnaOutDefaultPriority 1.3.6.1.4.1.562.2.4.1.106.2.2.2.11.1.7
If this attribute is set to normal, then the default priority for outgoing calls (from the DTE to the network) using this particular Dna is normal priority when the priority is not specified in the call. If this attribute is set to high then the default priority for outgoing calls using this particular Dna is high priority.
OBJECT-TYPE    
  INTEGER normal(0), high(1)  

traceRcvrX25DnaOutIntl 1.3.6.1.4.1.562.2.4.1.106.2.2.2.11.1.8
This attribute specifies that outgoing international calls (from the DTE to the network) can be made using this particular Dna. This attribute also controls access to another numbering plan, and specifies that cross-numbering plan calls are allowed.
OBJECT-TYPE    
  INTEGER disallowed(0), allowed(1)  

traceRcvrX25DnaOutDefaultPathSensitivity 1.3.6.1.4.1.562.2.4.1.106.2.2.2.11.1.11
This attribute specifies the default class of routing (delay/ throughput) for all outgoing calls (from the DTE to the network) using this particular Dna. The chosen default class of routing applies to all outgoing calls established using this Dna, and applies to the packets travelling in both directions on all outgoing calls (local to remote, and remote to local). This attribute, if set to a value of throughput, specifies that the default class of routing is throughput sensitive. If set to a value of delay, then the default class of routing is delay sensitive. This attribute is obsoleted. Please refer to defaultTransferPriority for the corresponding new attribute.
OBJECT-TYPE    
  INTEGER throughput(0), delay(1)  

traceRcvrX25DnaOutDefaultPathReliability 1.3.6.1.4.1.562.2.4.1.106.2.2.2.11.1.14
This attribute specifies the default reliability class of routing for all calls (from the DTE to the network) using this particular Dna. The chosen default reliability class of routing normally applies to all packets (including the call packets) travelling into the network. A value of high specifies that packets are to be overflowed or retransmitted at various routing levels. Typically high reliability results in duplication and disordering of packets in the network, when errors are detected or during link congestion. The VC handles the duplication and disordering to ensure that packets are delivered to the interface in the proper sequence and without duplication.
OBJECT-TYPE    
  INTEGER high(0), normal(1)  

traceRcvrX25DnaOutPathReliabilityOverRide 1.3.6.1.4.1.562.2.4.1.106.2.2.2.11.1.15
This attribute specifies that the called end of the connection will not use the calling end provisioning data for reliability class of routing to override the provisioning data at the called end.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

traceRcvrX25DnaOutPathReliabilitySignal 1.3.6.1.4.1.562.2.4.1.106.2.2.2.11.1.16
This attribute specifies that reliability routing signaling is not used.
OBJECT-TYPE    
  INTEGER disallowed(0), allowed(1)  

traceRcvrX25DnaOutAccess 1.3.6.1.4.1.562.2.4.1.106.2.2.2.11.1.17
This attribute is an extension of the Closed User Group (CUG) facility. If this attribute is set to a value of allowed, it specifies that outgoing calls (from the DTE to the network) to the open (non- CUG) part of the network are permitted. It also permits outgoing calls to interfaces that have Incoming Access capabilities. If set to a value of disallowed, then such calls cannot be made using this Dna (the calls will be cleared by the local DCE). This attribute corresponds to the ITU-T 'Closed User Group with Outgoing Access' feature.
OBJECT-TYPE    
  INTEGER disallowed(0), allowed(1)  

traceRcvrX25DnaIncomingOptionsTable 1.3.6.1.4.1.562.2.4.1.106.2.2.2.12
This group defines the call options for incoming calls.
OBJECT-TYPE    
  SEQUENCE OF  
    TraceRcvrX25DnaIncomingOptionsEntry

traceRcvrX25DnaIncomingOptionsEntry 1.3.6.1.4.1.562.2.4.1.106.2.2.2.12.1
An entry in the traceRcvrX25DnaIncomingOptionsTable.
OBJECT-TYPE    
  TraceRcvrX25DnaIncomingOptionsEntry  

traceRcvrX25DnaIncCalls 1.3.6.1.4.1.562.2.4.1.106.2.2.2.12.1.1
This attribute specifies that incoming calls (from the network to the DTE) cannot be made to this Dna.
OBJECT-TYPE    
  INTEGER disallowed(0), allowed(1)  

traceRcvrX25DnaCallOptionsTable 1.3.6.1.4.1.562.2.4.1.106.2.2.2.13
The CallOptions group defines additional options for calls which are not specific to the direction of the call.
OBJECT-TYPE    
  SEQUENCE OF  
    TraceRcvrX25DnaCallOptionsEntry

traceRcvrX25DnaCallOptionsEntry 1.3.6.1.4.1.562.2.4.1.106.2.2.2.13.1
An entry in the traceRcvrX25DnaCallOptionsTable.
OBJECT-TYPE    
  TraceRcvrX25DnaCallOptionsEntry  

traceRcvrX25DnaPacketSizes 1.3.6.1.4.1.562.2.4.1.106.2.2.2.13.1.2
This attribute specifies the allowable packet sizes supported for calls using this Dna. Description of bits: n16(0) n32(1) n64(2) n128(3) n256(4) n512(5) n1024(6) n2048(7) n4096(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

traceRcvrX25DnaDefaultRecvFrmNetworkPacketSize 1.3.6.1.4.1.562.2.4.1.106.2.2.2.13.1.3
This attribute specifies the default local receive packet size from network to DTE for calls using this particular Dna.
OBJECT-TYPE    
  INTEGER n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12)  

traceRcvrX25DnaDefaultSendToNetworkPacketSize 1.3.6.1.4.1.562.2.4.1.106.2.2.2.13.1.4
This attribute specifies the default local send packet size from DTE to network for all calls using this particular Dna.
OBJECT-TYPE    
  INTEGER n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12)  

traceRcvrX25DnaDefaultRecvFrmNetworkThruputClass 1.3.6.1.4.1.562.2.4.1.106.2.2.2.13.1.5
This attribute specifies the default receive throughput class, (towards the interface) for all calls using this particular Dna.
OBJECT-TYPE    
  Unsigned32 0..15  

traceRcvrX25DnaDefaultSendToNetworkThruputClass 1.3.6.1.4.1.562.2.4.1.106.2.2.2.13.1.6
This attribute specifies the default send throughput class (towards the network) for all calls using this particular Dna.
OBJECT-TYPE    
  Unsigned32 0..15  

traceRcvrX25DnaDefaultRecvFrmNetworkWindowSize 1.3.6.1.4.1.562.2.4.1.106.2.2.2.13.1.7
This attribute specifies the default value for the number of data packets that can be send to the interface before any acknowledgment.
OBJECT-TYPE    
  Unsigned32 1..7  

traceRcvrX25DnaDefaultSendToNetworkWindowSize 1.3.6.1.4.1.562.2.4.1.106.2.2.2.13.1.8
This attribute specifies the default value for the number of data packets that can be received from the interface before any acknowledgment.
OBJECT-TYPE    
  Unsigned32 1..7  

traceRcvrX25DnaPacketSizeNegotiation 1.3.6.1.4.1.562.2.4.1.106.2.2.2.13.1.9
This attribute, if set to local specifies that packet sizes can be negotiated locally at the interface irrespective of the setting at the remote interface. If set to endtoEnd, then the packet size negotiation is between the local and remote interface (i.e. packet sizes are the same on both interfaces).
OBJECT-TYPE    
  INTEGER endToEnd(0), local(1)  

traceRcvrX25DnaCugFormat 1.3.6.1.4.1.562.2.4.1.106.2.2.2.13.1.10
This attribute specifies the format to signal CUG indices as basic or extended. A basic CUG index format is two digits long. An extended CUG index format is four digits long.
OBJECT-TYPE    
  INTEGER basic(0), extended(1)  

traceRcvrX25Dc 1.3.6.1.4.1.562.2.4.1.106.2.2.3
OBJECT IDENTIFIER    

traceRcvrX25DcRowStatusTable 1.3.6.1.4.1.562.2.4.1.106.2.2.3.1
This entry controls the addition and deletion of traceRcvrX25Dc components.
OBJECT-TYPE    
  SEQUENCE OF  
    TraceRcvrX25DcRowStatusEntry

traceRcvrX25DcRowStatusEntry 1.3.6.1.4.1.562.2.4.1.106.2.2.3.1.1
A single entry in the table represents a single traceRcvrX25Dc component.
OBJECT-TYPE    
  TraceRcvrX25DcRowStatusEntry  

traceRcvrX25DcRowStatus 1.3.6.1.4.1.562.2.4.1.106.2.2.3.1.1.1
This variable is used as the basis for SNMP naming of traceRcvrX25Dc components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

traceRcvrX25DcComponentName 1.3.6.1.4.1.562.2.4.1.106.2.2.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

traceRcvrX25DcStorageType 1.3.6.1.4.1.562.2.4.1.106.2.2.3.1.1.4
This variable represents the storage type value for the traceRcvrX25Dc tables.
OBJECT-TYPE    
  StorageType  

traceRcvrX25DcIndex 1.3.6.1.4.1.562.2.4.1.106.2.2.3.1.1.10
This variable represents the index for the traceRcvrX25Dc tables.
OBJECT-TYPE    
  NonReplicated  

traceRcvrX25DcOptionsTable 1.3.6.1.4.1.562.2.4.1.106.2.2.3.10
The Options group defines attributes associated with the SVC direct call.
OBJECT-TYPE    
  SEQUENCE OF  
    TraceRcvrX25DcOptionsEntry

traceRcvrX25DcOptionsEntry 1.3.6.1.4.1.562.2.4.1.106.2.2.3.10.1
An entry in the traceRcvrX25DcOptionsTable.
OBJECT-TYPE    
  TraceRcvrX25DcOptionsEntry  

traceRcvrX25DcRemoteNpi 1.3.6.1.4.1.562.2.4.1.106.2.2.3.10.1.3
This attribute indicates the numbering plan used for the remoteDna.
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

traceRcvrX25DcRemoteDna 1.3.6.1.4.1.562.2.4.1.106.2.2.3.10.1.4
This attribute specifies the Data Network Address of the remote end of the connection. This is the DNA of the X.25 trace receiver which will receive the trace data.
OBJECT-TYPE    
  DigitString SIZE(1..15)  

traceRcvrX25DcType 1.3.6.1.4.1.562.2.4.1.106.2.2.3.10.1.6
This attribute specifies the type of call as switched. For a switched call, no information is defined at the remote end about the local end of the connection.
OBJECT-TYPE    
  INTEGER switched(0), permanentMaster(1), permanentSlave(2), permanentBackupSlave(3)  

traceRcvrX25DcUserData 1.3.6.1.4.1.562.2.4.1.106.2.2.3.10.1.8
This attribute contains the user data. It is a 0 to 16 byte length string which is appended to the call request packet that is presented to the called (destination) DTE.
OBJECT-TYPE    
  HexString SIZE(0..16)  

traceSessionX25 1.3.6.1.4.1.562.2.4.1.106.3.2
OBJECT IDENTIFIER    

traceSessionX25RowStatusTable 1.3.6.1.4.1.562.2.4.1.106.3.2.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of traceSessionX25 components.
OBJECT-TYPE    
  SEQUENCE OF  
    TraceSessionX25RowStatusEntry

traceSessionX25RowStatusEntry 1.3.6.1.4.1.562.2.4.1.106.3.2.1.1
A single entry in the table represents a single traceSessionX25 component.
OBJECT-TYPE    
  TraceSessionX25RowStatusEntry  

traceSessionX25RowStatus 1.3.6.1.4.1.562.2.4.1.106.3.2.1.1.1
This variable is used as the basis for SNMP naming of traceSessionX25 components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

traceSessionX25ComponentName 1.3.6.1.4.1.562.2.4.1.106.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

traceSessionX25StorageType 1.3.6.1.4.1.562.2.4.1.106.3.2.1.1.4
This variable represents the storage type value for the traceSessionX25 tables.
OBJECT-TYPE    
  StorageType  

traceSessionX25Index 1.3.6.1.4.1.562.2.4.1.106.3.2.1.1.10
This variable represents the index for the traceSessionX25 tables.
OBJECT-TYPE    
  NonReplicated  

traceSessionX25Vc 1.3.6.1.4.1.562.2.4.1.106.3.2.2
OBJECT IDENTIFIER    

traceSessionX25VcRowStatusTable 1.3.6.1.4.1.562.2.4.1.106.3.2.2.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of traceSessionX25Vc components.
OBJECT-TYPE    
  SEQUENCE OF  
    TraceSessionX25VcRowStatusEntry

traceSessionX25VcRowStatusEntry 1.3.6.1.4.1.562.2.4.1.106.3.2.2.1.1
A single entry in the table represents a single traceSessionX25Vc component.
OBJECT-TYPE    
  TraceSessionX25VcRowStatusEntry  

traceSessionX25VcRowStatus 1.3.6.1.4.1.562.2.4.1.106.3.2.2.1.1.1
This variable is used as the basis for SNMP naming of traceSessionX25Vc components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

traceSessionX25VcComponentName 1.3.6.1.4.1.562.2.4.1.106.3.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

traceSessionX25VcStorageType 1.3.6.1.4.1.562.2.4.1.106.3.2.2.1.1.4
This variable represents the storage type value for the traceSessionX25Vc tables.
OBJECT-TYPE    
  StorageType  

traceSessionX25VcIndex 1.3.6.1.4.1.562.2.4.1.106.3.2.2.1.1.10
This variable represents the index for the traceSessionX25Vc tables.
OBJECT-TYPE    
  NonReplicated  

traceSessionX25VcCadTable 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group represents operational call data related to General Vc. It can be displayed only for General Vc which is created by application.
OBJECT-TYPE    
  SEQUENCE OF  
    TraceSessionX25VcCadEntry

traceSessionX25VcCadEntry 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10.1
An entry in the traceSessionX25VcCadTable.
OBJECT-TYPE    
  TraceSessionX25VcCadEntry  

traceSessionX25VcType 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10.1.1
This attribute displays the type of call, pvc or svc. type is provided at provisioning time.
OBJECT-TYPE    
  INTEGER svc(0), pvc(1)  

traceSessionX25VcState 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10.1.2
This attribute displays the state of call control. P5 state is not supported but is listed for completness. Transitions from one state to another take very short time. state most often displayed is dataTransferP4.
OBJECT-TYPE    
  INTEGER creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8)  

traceSessionX25VcPreviousState 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10.1.3
This attribute displays the previous state of call control. This is a valuable field to determine how the processing is progressing.
OBJECT-TYPE    
  INTEGER creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8)  

traceSessionX25VcDiagnosticCode 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10.1.4
This attribute displays the internal substate of call control. It is used to further refine state of call processing.
OBJECT-TYPE    
  Unsigned32 0..255  

traceSessionX25VcPreviousDiagnosticCode 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10.1.5
This attribute displays the internal substate of call control. It is used to further refine state of call processing.
OBJECT-TYPE    
  Unsigned32 0..255  

traceSessionX25VcCalledNpi 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10.1.6
This attribute displays the Numbering Plan Indicator (NPI) of the called end.
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

traceSessionX25VcCalledDna 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10.1.7
This attribute displays the Data Network Address (Dna) of the called (destination) DTE to which this call is sent. This address if defined at recieving end will complete Vc connection.
OBJECT-TYPE    
  DigitString SIZE(1..15)  

traceSessionX25VcCalledLcn 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10.1.8
This attribute displays the Logical Channel Number of the called end. It is valid only after both ends of Vc exchanged relevant information.
OBJECT-TYPE    
  Unsigned32 1..65535  

traceSessionX25VcCallingNpi 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10.1.9
This attribute displays the Numbering Plan Indicator (NPI) of the calling end.
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

traceSessionX25VcCallingDna 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10.1.10
This attribute displays the Data Network Address (Dna) of the calling end.
OBJECT-TYPE    
  DigitString SIZE(1..15)  

traceSessionX25VcCallingLcn 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10.1.11
This attribute displays the Logical Channel Number of the calling end.
OBJECT-TYPE    
  Unsigned32 1..65535  

traceSessionX25VcAccountingEnabled 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10.1.12
This attribute indicates that this optional section of accounting record is suppressed or permitted. If accountingEnabled is yes, conditions for generation of accounting record were met. These conditions include billing options, vc recovery conditions and Module wide accounting data options.
OBJECT-TYPE    
  INTEGER yes(0), no(1)  

traceSessionX25VcFastSelectCall 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10.1.13
This attribute displays that this is a fast select call.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

traceSessionX25VcLocalRxPktSize 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10.1.14
This attribute displays the locally negotiated size of send packets.
OBJECT-TYPE    
  INTEGER unknown(0), n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12)  

traceSessionX25VcLocalTxPktSize 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10.1.15
This attribute displays the locally negotiated size of send packets.
OBJECT-TYPE    
  INTEGER unknown(0), n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12)  

traceSessionX25VcLocalTxWindowSize 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10.1.16
This attribute displays the send window size provided on incoming call packets or the default when a call request packet does not explicitly provide the window size.
OBJECT-TYPE    
  Unsigned32 0..127  

traceSessionX25VcLocalRxWindowSize 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10.1.17
This attribute displays the receive window size provided on incoming call packets or the default when a call request does not explicitly provide the window sizes.
OBJECT-TYPE    
  Unsigned32 0..127  

traceSessionX25VcPathReliability 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10.1.19
This attribute displays the path reliability.
OBJECT-TYPE    
  INTEGER high(0), normal(1)  

traceSessionX25VcAccountingEnd 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10.1.20
This attribute indicates if this end should generate an accounting record. Normally, callingEnd is the end to generate an accounting record.
OBJECT-TYPE    
  INTEGER callingEnd(0), calledEnd(1)  

traceSessionX25VcPriority 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10.1.21
This attribute displays whether the call is a normal or a high priority call.
OBJECT-TYPE    
  INTEGER normal(0), high(1)  

traceSessionX25VcSegmentSize 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10.1.22
This attribute displays the segment size (in bytes) used on the call. It is used to calculate the number of segments transmitted and received.
OBJECT-TYPE    
  Unsigned32 0..4096  

traceSessionX25VcSubnetTxPktSize 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10.1.23
This attribute displays the locally negotiated size of the data packets on this Vc.
OBJECT-TYPE    
  INTEGER unknown(0), n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12)  

traceSessionX25VcSubnetTxWindowSize 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10.1.24
This attribute displays the current send window size of Vc.
OBJECT-TYPE    
  Unsigned32 0..4096  

traceSessionX25VcSubnetRxPktSize 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10.1.25
This attribute displays the locally negotiated size of receive packets.
OBJECT-TYPE    
  INTEGER unknown(0), n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12)  

traceSessionX25VcSubnetRxWindowSize 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10.1.26
This attribute displays the receive window size provided on incoming call packets and to the default when a call request does not explicitly provide the window sizes.
OBJECT-TYPE    
  Unsigned32 0..4096  

traceSessionX25VcMaxSubnetPktSize 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10.1.27
This attribute displays the maximum packet size allowed on Vc.
OBJECT-TYPE    
  Unsigned32 0..4096  

traceSessionX25VcTransferPriorityToNetwork 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10.1.28
This attribute displays the priority in which data is transferred to the network. The transfer priority is a preference specified by an application according to its delay-sensitivity requirement. Frames with high transfer priority are served by the network before the frames with normal priority. Each transfer priority contains a predetermined setting for trunk queue (interrupting, delay or throughput), and routing metric (delay or throughput). When the transfer priority is set at high, the trunk queue is set to high, the routing metric is set to delay. When the transfer priority is set at normal, the trunk queue is set to normal, the routing metric is set to throughput.
OBJECT-TYPE    
  INTEGER normal(0), high(9)  

traceSessionX25VcTransferPriorityFromNetwork 1.3.6.1.4.1.562.2.4.1.106.3.2.2.10.1.29
This attribute displays the priority in which data is transferred from the network. The transfer priority is a preference specified by an application according to its delay-sensitivity requirement. Frames with high transfer priority are served by the network before the frames with normal priority. Each transfer priority contains a predetermined setting for trunk queue (interrupting, delay or throughput), and routing metric (delay or throughput). When the transfer priority is set at high, and the trunk queue is set to high, the routing metric is set to delay. When the transfer priority is set at normal, the trunk queue is set to normal, and the routing metric is set to throughput.
OBJECT-TYPE    
  INTEGER normal(0), high(9)  

traceSessionX25VcIntdTable 1.3.6.1.4.1.562.2.4.1.106.3.2.2.11
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group defines display of interval data collected by Vc. Data in this group is variable and may depend on time when this display command is issued.
OBJECT-TYPE    
  SEQUENCE OF  
    TraceSessionX25VcIntdEntry

traceSessionX25VcIntdEntry 1.3.6.1.4.1.562.2.4.1.106.3.2.2.11.1
An entry in the traceSessionX25VcIntdTable.
OBJECT-TYPE    
  TraceSessionX25VcIntdEntry  

traceSessionX25VcCallReferenceNumber 1.3.6.1.4.1.562.2.4.1.106.3.2.2.11.1.1
This attribute displays the call reference number which is a unique number generated by the switch.The same Call Reference Number is stored in the interval data (accounting record) at both ends of the call. It can be used as one of the attributes in matching duplicate records generated at each end of the call.
OBJECT-TYPE    
  Hex 0..16777215  

traceSessionX25VcElapsedTimeTillNow 1.3.6.1.4.1.562.2.4.1.106.3.2.2.11.1.2
This attribute displays the elapsed time representing the period of this interval data. It is elapsed time in 0.1 second increments since Vc started.
OBJECT-TYPE    
  Unsigned32 0..16777215  

traceSessionX25VcSegmentsRx 1.3.6.1.4.1.562.2.4.1.106.3.2.2.11.1.3
This attribute displays the number of segments received at the time command was issued. This is the segment received count maintained by accounting at each end of the Vc. This counter is updated only when the packet cannot be successfully delivered out of the sink Vc and to the sink AP Conditions in which packets may be discarded by the sink Vc include: missing packets due to subnet discards, segmentation protocol violations due to subnet discard, duplicated and out-of-ranged packets and packets that arrive while Vc is in path recovery state.
OBJECT-TYPE    
  Unsigned32 0..16777215  

traceSessionX25VcSegmentsSent 1.3.6.1.4.1.562.2.4.1.106.3.2.2.11.1.4
This attribute displays the number of segments sent at the time command was issued. This is the segment sent count maintained by accounting at the source Vc. Vc only counts packets that Vc thinks can be delivered successfully into the subnet. In reality, these packets may be dropped by trunking, for instance. This counter is not updated when splitting fails, when Vc is in a path recovery state, when packet forwarding fails to forward this packet and when subsequent packets have to be discarded as we want to minimize the chance of out-of-sequence and do not intentionally send out-of- sequenced packets into the subnet.
OBJECT-TYPE    
  Unsigned32 0..16777215  

traceSessionX25VcStartTime 1.3.6.1.4.1.562.2.4.1.106.3.2.2.11.1.5
This attribute displays the start time of this interval period. If Vc spans 12 hour time or time of day change startTime reflects new time as recorded at 12 hour periods or time of day changes.
OBJECT-TYPE    
  EnterpriseDateAndTime SIZE(0 | 19)  

traceSessionX25VcStatsTable 1.3.6.1.4.1.562.2.4.1.106.3.2.2.12
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** ... Statistics(Stats) This group defines general attributes collected by general Vc. The purpose of Vc attributes is to aid end users and verification people to understand the Vc internal behavior. This is particularly useful when the network has experienced abnormality and we want to isolate problems and pinpoint trouble spots. Attributes are collected on a per Vc basis. Until a need is identified, statistics are not collected at a processor level. Each attribute is stored in a 32 bit field and is initialized to zero when a Vc enters into the data transfer state. When a PVC is disconnected and then connected again, the attributes will be reset. Attributes cannot be reset through other methods.
OBJECT-TYPE    
  SEQUENCE OF  
    TraceSessionX25VcStatsEntry

traceSessionX25VcStatsEntry 1.3.6.1.4.1.562.2.4.1.106.3.2.2.12.1
An entry in the traceSessionX25VcStatsTable.
OBJECT-TYPE    
  TraceSessionX25VcStatsEntry  

traceSessionX25VcAckStackingTimeouts 1.3.6.1.4.1.562.2.4.1.106.3.2.2.12.1.1
This attribute counts the number of ack stacking timer expiries. It is used as an indicator of the acknowledgment behavior across the subnet when ack stacking is in effect. If it expires often, usually this means end users will experience longer delay. The ack stacking timer specifies how long the Vc will wait before finally sending the subnet acknowledgment. if this attribute is set to a value of 0, then the Vc will automatically return acknowledgment packets without delay. If this attribute is set to a value other than zero, then the Vc will wait for this amount of time in an attempt to piggyback the acknowledgment packet on another credit or data packet. If the Vc cannot piggyback the acknowledgment packet within this time, then the packet is returned without piggybacking.
OBJECT-TYPE    
  Unsigned32 0..5000  

traceSessionX25VcOutOfRangeFrmFromSubnet 1.3.6.1.4.1.562.2.4.1.106.3.2.2.12.1.2
This attribute counts the number of subnet frames discarded due to the sequence number being out of range. Two Categories apply for the General Vc 1) lost Acks (previous Range) 2) unexpected Packets (next Range) Vc internally maintains its own sequence number of packet order and sequencing. Due to packet retransmission, Vc may receive duplicate packets that have the same Vc internal sequence number. Only 1 copy is accepted by the Vc and other copies of the same packets are detected through this count. This attribute can be used to record the frequency of packet retransmission due to Vc and other part of the subnet.
OBJECT-TYPE    
  Unsigned32 0..5000  

traceSessionX25VcDuplicatesFromSubnet 1.3.6.1.4.1.562.2.4.1.106.3.2.2.12.1.3
This attribute counts the number of subnet packets discarded due to duplication. It is used to detect software error fault or duplication caused by retransmitting.
OBJECT-TYPE    
  Unsigned32 0..5000  

traceSessionX25VcFrmRetryTimeouts 1.3.6.1.4.1.562.2.4.1.106.3.2.2.12.1.4
This attribute counts the number of frames which have retransmission time-out. If packets from Vc into the subnet are discarded by the subnet, the source Vc will not receive any acknowledgment. The retransmission timer then expires and packets will be retransmitted again. Note that the Vc idle probe may be retransmitted and is included in this count. This statistics does not show the distribution of how many times packets are retransmitted (e.g. first retransmission results in successful packet forwarding).
OBJECT-TYPE    
  Unsigned32 0..5000  

traceSessionX25VcPeakRetryQueueSize 1.3.6.1.4.1.562.2.4.1.106.3.2.2.12.1.5
This attribute indicates the peak size of the retransmission queue. This attribute is used as an indicator of the acknowledgment behavior across the subnet. It records the largest body of unacknowledged packets.
OBJECT-TYPE    
  Unsigned32 0..5000  

traceSessionX25VcPeakOoSeqQueueSize 1.3.6.1.4.1.562.2.4.1.106.3.2.2.12.1.6
This attribute indicates the peak size of the out of sequence queue. This attribute is used as an indicator of the sequencing behavior across the subnet. It records the largest body of out of sequence packets.
OBJECT-TYPE    
  Unsigned32 0..5000  

traceSessionX25VcPeakOoSeqFrmForwarded 1.3.6.1.4.1.562.2.4.1.106.3.2.2.12.1.7
This attribute indicates the peak size of the sequence packet queue. This attribute is used as an indicator of the sequencing behavior across the subnet. It records the largest body of out of sequence packets, which by the receipt of an expected packet have been transformed to expected packets. The number of times this peak is reached is not recorded as it is traffic dependent.
OBJECT-TYPE    
  Unsigned32 0..5000  

traceSessionX25VcPeakStackedAcksRx 1.3.6.1.4.1.562.2.4.1.106.3.2.2.12.1.8
This attribute indicates the peak size of wait acks. This attribute is used as an indicator of the acknowledgment behavior across the subnet. It records the largest collective acknowledgment.
OBJECT-TYPE    
  Unsigned32 0..5000  

traceSessionX25VcSubnetRecoveries 1.3.6.1.4.1.562.2.4.1.106.3.2.2.12.1.9
This attribute counts the number of successful Vc recovery attempts. This attribute is used as an indicator of how many times the Vc path is broken but can be recovered. This attribute is useful to record the number of network path failures.
OBJECT-TYPE    
  Unsigned32 0..5000  

traceSessionX25VcWindowClosuresToSubnet 1.3.6.1.4.1.562.2.4.1.106.3.2.2.12.1.10
This attribute counts the number of window closures to subnet. A packet may have been sent into the subnet but its acknowledgment from the remote Vc has not yet been received. This is a 8 bit sequence number.This number is useful in detecting whether the Vc is sending any packet into the subnet.
OBJECT-TYPE    
  Unsigned32 0..5000  

traceSessionX25VcWindowClosuresFromSubnet 1.3.6.1.4.1.562.2.4.1.106.3.2.2.12.1.11
This attribute counts the number of window closures from subnet. This attribute is useful in detecting whether the Vc is receiving any packet from the subnet.
OBJECT-TYPE    
  Unsigned32 0..5000  

traceSessionX25VcWrTriggers 1.3.6.1.4.1.562.2.4.1.106.3.2.2.12.1.12
This attribute displays the number of times the Vc stays within the W-R region. The W-R region is a value used to determined the timing of credit transmission. Should the current window size be beneath this value, the credits will be transmitted immediately. Otherwise, they will be transmitted later with actual data. The wrTriggers statistic is therefore used to analyze the flow control and credit mechanism.
OBJECT-TYPE    
  Unsigned32 0..5000  

x25TraceRcvrMIB 1.3.6.1.4.1.562.2.4.2.62
OBJECT IDENTIFIER    

x25TraceRcvrGroup 1.3.6.1.4.1.562.2.4.2.62.1
OBJECT IDENTIFIER    

x25TraceRcvrGroupBD 1.3.6.1.4.1.562.2.4.2.62.1.4
OBJECT IDENTIFIER    

x25TraceRcvrGroupBD00 1.3.6.1.4.1.562.2.4.2.62.1.4.1
OBJECT IDENTIFIER    

x25TraceRcvrGroupBD00A 1.3.6.1.4.1.562.2.4.2.62.1.4.1.2
OBJECT IDENTIFIER    

x25TraceRcvrCapabilities 1.3.6.1.4.1.562.2.4.2.62.3
OBJECT IDENTIFIER    

x25TraceRcvrCapabilitiesBD 1.3.6.1.4.1.562.2.4.2.62.3.4
OBJECT IDENTIFIER    

x25TraceRcvrCapabilitiesBD00 1.3.6.1.4.1.562.2.4.2.62.3.4.1
OBJECT IDENTIFIER    

x25TraceRcvrCapabilitiesBD00A 1.3.6.1.4.1.562.2.4.2.62.3.4.1.2
OBJECT IDENTIFIER    

Defined Objects

TraceRcvrX25RowStatusEntry  
SEQUENCE    
  RowStatus as traceRcvrX25RowStatus  
  DisplayString as traceRcvrX25ComponentName  
  StorageType as traceRcvrX25StorageType  
  NonReplicated as traceRcvrX25Index  

TraceRcvrX25DnaRowStatusEntry  
SEQUENCE    
  RowStatus as traceRcvrX25DnaRowStatus  
  DisplayString as traceRcvrX25DnaComponentName  
  StorageType as traceRcvrX25DnaStorageType  
  NonReplicated as traceRcvrX25DnaIndex  

TraceRcvrX25DnaAddressEntry  
SEQUENCE    
  INTEGER as traceRcvrX25DnaNumberingPlanIndicator  
  DigitString as traceRcvrX25DnaDataNetworkAddress  

TraceRcvrX25DnaOutgoingOptionsEntry  
SEQUENCE    
  INTEGER as traceRcvrX25DnaOutCalls  
  INTEGER as traceRcvrX25DnaOutDefaultPriority  
  INTEGER as traceRcvrX25DnaOutIntl  
  INTEGER as traceRcvrX25DnaOutDefaultPathSensitivity  
  INTEGER as traceRcvrX25DnaOutDefaultPathReliability  
  INTEGER as traceRcvrX25DnaOutPathReliabilityOverRide  
  INTEGER as traceRcvrX25DnaOutPathReliabilitySignal  
  INTEGER as traceRcvrX25DnaOutAccess  

TraceRcvrX25DnaIncomingOptionsEntry  
SEQUENCE    
  INTEGER as traceRcvrX25DnaIncCalls  

TraceRcvrX25DnaCallOptionsEntry  
SEQUENCE    
  OCTET STRING as traceRcvrX25DnaPacketSizes  
  INTEGER as traceRcvrX25DnaDefaultRecvFrmNetworkPacketSize  
  INTEGER as traceRcvrX25DnaDefaultSendToNetworkPacketSize  
  Unsigned32 as traceRcvrX25DnaDefaultRecvFrmNetworkThruputClass  
  Unsigned32 as traceRcvrX25DnaDefaultSendToNetworkThruputClass  
  Unsigned32 as traceRcvrX25DnaDefaultRecvFrmNetworkWindowSize  
  Unsigned32 as traceRcvrX25DnaDefaultSendToNetworkWindowSize  
  INTEGER as traceRcvrX25DnaPacketSizeNegotiation  
  INTEGER as traceRcvrX25DnaCugFormat  

TraceRcvrX25DnaCugRowStatusEntry  
SEQUENCE    
  RowStatus as traceRcvrX25DnaCugRowStatus  
  DisplayString as traceRcvrX25DnaCugComponentName  
  StorageType as traceRcvrX25DnaCugStorageType  
  Integer32 as traceRcvrX25DnaCugIndex  

TraceRcvrX25DnaCugCugOptionsEntry  
SEQUENCE    
  INTEGER as traceRcvrX25DnaCugType  
  DigitString as traceRcvrX25DnaCugDnic  
  Unsigned32 as traceRcvrX25DnaCugInterlockCode  
  INTEGER as traceRcvrX25DnaCugPreferential  
  INTEGER as traceRcvrX25DnaCugOutCalls  
  INTEGER as traceRcvrX25DnaCugIncCalls  
  INTEGER as traceRcvrX25DnaCugPrivileged  

TraceRcvrX25DcRowStatusEntry  
SEQUENCE    
  RowStatus as traceRcvrX25DcRowStatus  
  DisplayString as traceRcvrX25DcComponentName  
  StorageType as traceRcvrX25DcStorageType  
  NonReplicated as traceRcvrX25DcIndex  

TraceRcvrX25DcOptionsEntry  
SEQUENCE    
  INTEGER as traceRcvrX25DcRemoteNpi  
  DigitString as traceRcvrX25DcRemoteDna  
  INTEGER as traceRcvrX25DcType  
  HexString as traceRcvrX25DcUserData  

TraceSessionX25RowStatusEntry  
SEQUENCE    
  RowStatus as traceSessionX25RowStatus  
  DisplayString as traceSessionX25ComponentName  
  StorageType as traceSessionX25StorageType  
  NonReplicated as traceSessionX25Index  

TraceSessionX25VcRowStatusEntry  
SEQUENCE    
  RowStatus as traceSessionX25VcRowStatus  
  DisplayString as traceSessionX25VcComponentName  
  StorageType as traceSessionX25VcStorageType  
  NonReplicated as traceSessionX25VcIndex  

TraceSessionX25VcCadEntry  
SEQUENCE    
  INTEGER as traceSessionX25VcType  
  INTEGER as traceSessionX25VcState  
  INTEGER as traceSessionX25VcPreviousState  
  Unsigned32 as traceSessionX25VcDiagnosticCode  
  Unsigned32 as traceSessionX25VcPreviousDiagnosticCode  
  INTEGER as traceSessionX25VcCalledNpi  
  DigitString as traceSessionX25VcCalledDna  
  Unsigned32 as traceSessionX25VcCalledLcn  
  INTEGER as traceSessionX25VcCallingNpi  
  DigitString as traceSessionX25VcCallingDna  
  Unsigned32 as traceSessionX25VcCallingLcn  
  INTEGER as traceSessionX25VcAccountingEnabled  
  INTEGER as traceSessionX25VcFastSelectCall  
  INTEGER as traceSessionX25VcLocalRxPktSize  
  INTEGER as traceSessionX25VcLocalTxPktSize  
  Unsigned32 as traceSessionX25VcLocalTxWindowSize  
  Unsigned32 as traceSessionX25VcLocalRxWindowSize  
  INTEGER as traceSessionX25VcPathReliability  
  INTEGER as traceSessionX25VcAccountingEnd  
  INTEGER as traceSessionX25VcPriority  
  Unsigned32 as traceSessionX25VcSegmentSize  
  INTEGER as traceSessionX25VcSubnetTxPktSize  
  Unsigned32 as traceSessionX25VcSubnetTxWindowSize  
  INTEGER as traceSessionX25VcSubnetRxPktSize  
  Unsigned32 as traceSessionX25VcSubnetRxWindowSize  
  Unsigned32 as traceSessionX25VcMaxSubnetPktSize  
  INTEGER as traceSessionX25VcTransferPriorityToNetwork  
  INTEGER as traceSessionX25VcTransferPriorityFromNetwork  

TraceSessionX25VcIntdEntry  
SEQUENCE    
  Hex as traceSessionX25VcCallReferenceNumber  
  Unsigned32 as traceSessionX25VcElapsedTimeTillNow  
  Unsigned32 as traceSessionX25VcSegmentsRx  
  Unsigned32 as traceSessionX25VcSegmentsSent  
  EnterpriseDateAndTime as traceSessionX25VcStartTime  

TraceSessionX25VcStatsEntry  
SEQUENCE    
  Unsigned32 as traceSessionX25VcAckStackingTimeouts  
  Unsigned32 as traceSessionX25VcOutOfRangeFrmFromSubnet  
  Unsigned32 as traceSessionX25VcDuplicatesFromSubnet  
  Unsigned32 as traceSessionX25VcFrmRetryTimeouts  
  Unsigned32 as traceSessionX25VcPeakRetryQueueSize  
  Unsigned32 as traceSessionX25VcPeakOoSeqQueueSize  
  Unsigned32 as traceSessionX25VcPeakOoSeqFrmForwarded  
  Unsigned32 as traceSessionX25VcPeakStackedAcksRx  
  Unsigned32 as traceSessionX25VcSubnetRecoveries  
  Unsigned32 as traceSessionX25VcWindowClosuresToSubnet  
  Unsigned32 as traceSessionX25VcWindowClosuresFromSubnet  
  Unsigned32 as traceSessionX25VcWrTriggers