
| RFC-1212 | RFC1155-SMI | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB | Nortel-MsCarrier-MscPassport-TextualConventionsMIB |
| mscAppn | 1.3.6.1.4.1.562.36.2.1.110 | ||
| OBJECT IDENTIFIER | |||
| mscAppnRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.1 | ||
| This entry controls the addition and deletion of mscAppn components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnRowStatusEntry | |||
| mscAppnRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.1.1 | ||
| A single entry in the table represents a single mscAppn component. | |||
| OBJECT-TYPE | |||
| MscAppnRowStatusEntry | |||
| mscAppnRowStatus | 1.3.6.1.4.1.562.36.2.1.110.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppn components. These components can be added and deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnComponentName | 1.3.6.1.4.1.562.36.2.1.110.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnStorageType | 1.3.6.1.4.1.562.36.2.1.110.1.1.4 | ||
| This variable represents the storage type value for the mscAppn tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnIndex | 1.3.6.1.4.1.562.36.2.1.110.1.1.10 | ||
| This variable represents the index for the mscAppn tables. | |||
| OBJECT-TYPE | |||
| AsciiStringIndex | SIZE(1..17) | ||
| mscAppnDna | 1.3.6.1.4.1.562.36.2.1.110.2 | ||
| OBJECT IDENTIFIER | |||
| mscAppnDnaRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.2.1 | ||
| This entry controls the addition and deletion of mscAppnDna components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDnaRowStatusEntry | |||
| mscAppnDnaRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.2.1.1 | ||
| A single entry in the table represents a single mscAppnDna component. | |||
| OBJECT-TYPE | |||
| MscAppnDnaRowStatusEntry | |||
| mscAppnDnaRowStatus | 1.3.6.1.4.1.562.36.2.1.110.2.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnDna components. These components cannot be added nor deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnDnaComponentName | 1.3.6.1.4.1.562.36.2.1.110.2.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnDnaStorageType | 1.3.6.1.4.1.562.36.2.1.110.2.1.1.4 | ||
| This variable represents the storage type value for the mscAppnDna tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnDnaIndex | 1.3.6.1.4.1.562.36.2.1.110.2.1.1.10 | ||
| This variable represents the index for the mscAppnDna tables. | |||
| OBJECT-TYPE | |||
| NonReplicated | |||
| mscAppnDnaHgM | 1.3.6.1.4.1.562.36.2.1.110.2.2 | ||
| OBJECT IDENTIFIER | |||
| mscAppnDnaHgMRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.2.2.1 | ||
| This entry controls the addition and deletion of mscAppnDnaHgM components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDnaHgMRowStatusEntry | |||
| mscAppnDnaHgMRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.2.2.1.1 | ||
| A single entry in the table represents a single mscAppnDnaHgM component. | |||
| OBJECT-TYPE | |||
| MscAppnDnaHgMRowStatusEntry | |||
| mscAppnDnaHgMRowStatus | 1.3.6.1.4.1.562.36.2.1.110.2.2.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnDnaHgM components. These components can be added and deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnDnaHgMComponentName | 1.3.6.1.4.1.562.36.2.1.110.2.2.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnDnaHgMStorageType | 1.3.6.1.4.1.562.36.2.1.110.2.2.1.1.4 | ||
| This variable represents the storage type value for the mscAppnDnaHgM tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnDnaHgMIndex | 1.3.6.1.4.1.562.36.2.1.110.2.2.1.1.10 | ||
| This variable represents the index for the mscAppnDnaHgM tables. | |||
| OBJECT-TYPE | |||
| NonReplicated | |||
| mscAppnDnaHgMHgAddr | 1.3.6.1.4.1.562.36.2.1.110.2.2.2 | ||
| OBJECT IDENTIFIER | |||
| mscAppnDnaHgMHgAddrRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.2.2.2.1 | ||
| This entry controls the addition and deletion of mscAppnDnaHgMHgAddr components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDnaHgMHgAddrRowStatusEntry | |||
| mscAppnDnaHgMHgAddrRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.2.2.2.1.1 | ||
| A single entry in the table represents a single mscAppnDnaHgMHgAddr component. | |||
| OBJECT-TYPE | |||
| MscAppnDnaHgMHgAddrRowStatusEntry | |||
| mscAppnDnaHgMHgAddrRowStatus | 1.3.6.1.4.1.562.36.2.1.110.2.2.2.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnDnaHgMHgAddr components. These components can be added and deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnDnaHgMHgAddrComponentName | 1.3.6.1.4.1.562.36.2.1.110.2.2.2.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnDnaHgMHgAddrStorageType | 1.3.6.1.4.1.562.36.2.1.110.2.2.2.1.1.4 | ||
| This variable represents the storage type value for the mscAppnDnaHgMHgAddr tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnDnaHgMHgAddrIndex | 1.3.6.1.4.1.562.36.2.1.110.2.2.2.1.1.10 | ||
| This variable represents the index for the mscAppnDnaHgMHgAddr tables. | |||
| OBJECT-TYPE | |||
| Integer32 | 0..1 | ||
| mscAppnDnaHgMHgAddrAddrTable | 1.3.6.1.4.1.562.36.2.1.110.2.2.2.10 | ||
| This group contains attributes common to all DNAs. Every DNA used in the network is defined with this group of 2 attributes. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDnaHgMHgAddrAddrEntry | |||
| mscAppnDnaHgMHgAddrAddrEntry | 1.3.6.1.4.1.562.36.2.1.110.2.2.2.10.1 | ||
| An entry in the mscAppnDnaHgMHgAddrAddrTable. | |||
| OBJECT-TYPE | |||
| MscAppnDnaHgMHgAddrAddrEntry | |||
| mscAppnDnaHgMHgAddrNumberingPlanIndicator | 1.3.6.1.4.1.562.36.2.1.110.2.2.2.10.1.1 | ||
| This attribute specifies the Numbering Plan Indicator (NPI) of the Dna that is entered. The address may belong to the X.121 or E.164 numbering plans. | |||
| OBJECT-TYPE | |||
| INTEGER | x121(0), e164(1) | ||
| mscAppnDnaHgMHgAddrDataNetworkAddress | 1.3.6.1.4.1.562.36.2.1.110.2.2.2.10.1.2 | ||
| This attribute specifies the digits that form the unique identifier of the customer interface. It can be compared (approximation only) to a telephone number where phone number identifies unique telephone set. Dna digits are selected and assigned by network operators. | |||
| OBJECT-TYPE | |||
| DigitString | SIZE(1..15) | ||
| mscAppnDnaHgMIfTable | 1.3.6.1.4.1.562.36.2.1.110.2.2.10 | ||
| This group contains the interface parameters between the HuntGroupMember and the Hunt Group server. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDnaHgMIfEntry | |||
| mscAppnDnaHgMIfEntry | 1.3.6.1.4.1.562.36.2.1.110.2.2.10.1 | ||
| An entry in the mscAppnDnaHgMIfTable. | |||
| OBJECT-TYPE | |||
| MscAppnDnaHgMIfEntry | |||
| mscAppnDnaHgMAvailabilityUpdateThreshold | 1.3.6.1.4.1.562.36.2.1.110.2.2.10.1.1 | ||
| This attribute indicates the number of channels that have to be freed or occupied before the Availability Message Packet (AMP) is sent to the Hunt Group Server informing it of the status of this interface. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..4096 | ||
| mscAppnDnaHgMOpTable | 1.3.6.1.4.1.562.36.2.1.110.2.2.11 | ||
| This group contains the operational attributes of the HuntGroupMember component. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDnaHgMOpEntry | |||
| mscAppnDnaHgMOpEntry | 1.3.6.1.4.1.562.36.2.1.110.2.2.11.1 | ||
| An entry in the mscAppnDnaHgMOpTable. | |||
| OBJECT-TYPE | |||
| MscAppnDnaHgMOpEntry | |||
| mscAppnDnaHgMMaxAvailableChannels | 1.3.6.1.4.1.562.36.2.1.110.2.2.11.1.1 | ||
| This attribute indicates the maximum number of available channels for this HuntGroupMember. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..4096 | ||
| mscAppnDnaHgMAvailableChannels | 1.3.6.1.4.1.562.36.2.1.110.2.2.11.1.2 | ||
| This attribute indicates the number of available channels reported to the hunt group in the Availability Message Packet (AMP). It is incremented by the application when a channel is freed and decremented when a channel is occupied. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..4096 | ||
| mscAppnDnaHgMAvailabilityDelta | 1.3.6.1.4.1.562.36.2.1.110.2.2.11.1.3 | ||
| This attribute indicates the net change in the available channels since the last Availability Message Packet (AMP) was sent to the Hunt Group. Once the absolute value of this attribute reaches the availabilityUpdateThreshold an AMP is sent to the host and the availabilityDelta is reset to 0. If this attribute is positive it means an increase of the number of available channels. If it is negative it means a decrease in the number of available channels. | |||
| OBJECT-TYPE | |||
| INTEGER | -4096..4096 | ||
| mscAppnDnaCug | 1.3.6.1.4.1.562.36.2.1.110.2.3 | ||
| OBJECT IDENTIFIER | |||
| mscAppnDnaCugRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.2.3.1 | ||
| This entry controls the addition and deletion of mscAppnDnaCug components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDnaCugRowStatusEntry | |||
| mscAppnDnaCugRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.2.3.1.1 | ||
| A single entry in the table represents a single mscAppnDnaCug component. | |||
| OBJECT-TYPE | |||
| MscAppnDnaCugRowStatusEntry | |||
| mscAppnDnaCugRowStatus | 1.3.6.1.4.1.562.36.2.1.110.2.3.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnDnaCug components. These components can be added and deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnDnaCugComponentName | 1.3.6.1.4.1.562.36.2.1.110.2.3.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnDnaCugStorageType | 1.3.6.1.4.1.562.36.2.1.110.2.3.1.1.4 | ||
| This variable represents the storage type value for the mscAppnDnaCug tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnDnaCugIndex | 1.3.6.1.4.1.562.36.2.1.110.2.3.1.1.10 | ||
| This variable represents the index for the mscAppnDnaCug tables. | |||
| OBJECT-TYPE | |||
| Integer32 | 1..255 | ||
| mscAppnDnaCugCugOptionsTable | 1.3.6.1.4.1.562.36.2.1.110.2.3.10 | ||
| Attributes in this group defines ClosedUserGroup options associated with interlockCode. Dnas with the same Cug (interlockCode) make calls within this group. Various combinations which permit or prevent calls in the same Cug group are defined here. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDnaCugCugOptionsEntry | |||
| mscAppnDnaCugCugOptionsEntry | 1.3.6.1.4.1.562.36.2.1.110.2.3.10.1 | ||
| An entry in the mscAppnDnaCugCugOptionsTable. | |||
| OBJECT-TYPE | |||
| MscAppnDnaCugCugOptionsEntry | |||
| mscAppnDnaCugType | 1.3.6.1.4.1.562.36.2.1.110.2.3.10.1.1 | ||
| This attribute specifies the Cug type - the Cug is either a national Cug, or an international Cug. International closed user groups are usually established between DTEs for which there is an X.75 Gateway between; whereas national closed user groups are usually established between DTEs for which there is no X.75 Gateway between. (National Cugs cannot normally traverse an X.75 Gateway). If this attribute is set to national, then the Cug is a national Cug, in which case, the dnic should be left at its default value since it is not part of a national Cug. If this attribute is set to international, then the Cug is an international Cug, in which case, the dnic should be set appropriately as part of the Cug interlockCode. | |||
| OBJECT-TYPE | |||
| INTEGER | national(0), international(1) | ||
| mscAppnDnaCugDnic | 1.3.6.1.4.1.562.36.2.1.110.2.3.10.1.2 | ||
| This attribute specifies the dnic (Data Network ID Code) the Cug by which packet networks are identified. This attribute is not applicable if the Cug is a national Cug, as specified by the Cug type attribute. There are usually 1 or 2 dnics assigned per country, for public networks. The U.S. is an exception where each BOC has a dnic. Also, a group of private networks can have its own dnic. dnic value is not an arbitrary number. It is assigned by international agreement and controlled by CCITT. | |||
| OBJECT-TYPE | |||
| DigitString | SIZE(4) | ||
| mscAppnDnaCugInterlockCode | 1.3.6.1.4.1.562.36.2.1.110.2.3.10.1.3 | ||
| This attribute specifies the Cug identifier of a national or international Cug call. It is an arbitrary number and it also can be called Cug in some descriptions. Interfaces (Dnas) with this number can make calls to Dnas with the same interlockCode. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| mscAppnDnaCugPreferential | 1.3.6.1.4.1.562.36.2.1.110.2.3.10.1.4 | ||
| This attribute, if set to yes indicates that this Cug is the preferential Cug, in which case it will be used during the call establishment phase if the DTE has not explicitly specified a Cug index in the call request packet. If set to no, then this Cug is not the preferential Cug. Only one of the Cugs associated with a particular Dna can be the preferential Cug - only one Cug can have this attribute set to yes. | |||
| OBJECT-TYPE | |||
| INTEGER | no(0), yes(1) | ||
| mscAppnDnaCugOutCalls | 1.3.6.1.4.1.562.36.2.1.110.2.3.10.1.5 | ||
| This attribute, if set to allowed indicates that outgoing calls (from the DTE into the network) be made using this particular Cug. If set to a value of disallowed, then outgoing calls cannot be made using this Cug - such calls will be cleared by the local DCE. This attribute corresponds to the CCITT 'Outgoing Calls Barred' feature for Cugs in that outgoing calls are barred if this attribute is set to a value of disallowed. | |||
| OBJECT-TYPE | |||
| INTEGER | disallowed(0), allowed(1) | ||
| mscAppnDnaCugIncCalls | 1.3.6.1.4.1.562.36.2.1.110.2.3.10.1.6 | ||
| This attribute, if set to allowed indicates that incoming calls (from the network to the DTE) be made using this particular Cug. If set to disallowed, then incoming calls cannot be made using this Cug - such calls will be cleared by the local DCE. This attribute corresponds to the CCITT 'Incoming Calls Barred' feature for Cugs in that incoming calls are barred if this attribute is set to a value of disallowed. | |||
| OBJECT-TYPE | |||
| INTEGER | disallowed(0), allowed(1) | ||
| mscAppnDnaCugPrivileged | 1.3.6.1.4.1.562.36.2.1.110.2.3.10.1.7 | ||
| This attribute, if set to yes indicates that this Cug is a privileged Cug. In DPN, at least one side of a call setup within a Cug must have the Cug as a privileged Cug. If set to no, then the Cug is not privileged. If both the local DTE and the remote DTE subscribe to the Cug, but it is not privileged, then the call will be cleared. This attribute is typically used for a host DTE which must accept calls from many other DTEs in which case the other DTEs cannot call one another, but can call the host. In this example, the host would have the privileged Cug, and the other DTEs would belong to the same Cug, but it would not be privileged. | |||
| OBJECT-TYPE | |||
| INTEGER | no(0), yes(1) | ||
| mscAppnDnaAddressTable | 1.3.6.1.4.1.562.36.2.1.110.2.10 | ||
| Address group contains attributes common to all Dna's. Every Dna used in the network is defined with this group of 2 attributes. String of address digits is complemented by type of address and Npi. These attributes are used to interpret format of the address digits. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDnaAddressEntry | |||
| mscAppnDnaAddressEntry | 1.3.6.1.4.1.562.36.2.1.110.2.10.1 | ||
| An entry in the mscAppnDnaAddressTable. | |||
| OBJECT-TYPE | |||
| MscAppnDnaAddressEntry | |||
| mscAppnDnaNumberingPlanIndicator | 1.3.6.1.4.1.562.36.2.1.110.2.10.1.1 | ||
| This attribute indicates the Numbering Plan Indicator (NPI) of the Dna that is entered. Address may belong to X.121 or E.164 plans. X.121 is used in packet switched data networks. | |||
| OBJECT-TYPE | |||
| INTEGER | x121(0), e164(1) | ||
| mscAppnDnaDataNetworkAddress | 1.3.6.1.4.1.562.36.2.1.110.2.10.1.2 | ||
| Dna attribute contains digits which form unique identifier of the customer interface. It can be compared (approximation only) to telephone number where phone number identifies unique telephone set. Dna digits are selected and assigned by network operators. | |||
| OBJECT-TYPE | |||
| DigitString | SIZE(1..15) | ||
| mscAppnDnaOutgoingOptionsTable | 1.3.6.1.4.1.562.36.2.1.110.2.12 | ||
| OutgoingOptions group defines call options of a Dna for calls which are made out of the interface represented by Dna. All these options are not used for calls arriving to the interface represented by Dna. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDnaOutgoingOptionsEntry | |||
| mscAppnDnaOutgoingOptionsEntry | 1.3.6.1.4.1.562.36.2.1.110.2.12.1 | ||
| An entry in the mscAppnDnaOutgoingOptionsTable. | |||
| OBJECT-TYPE | |||
| MscAppnDnaOutgoingOptionsEntry | |||
| mscAppnDnaOutDefaultPriority | 1.3.6.1.4.1.562.36.2.1.110.2.12.1.7 | ||
| This attribute, if set to normal indicates that the default priority for outgoing calls (from the DTE to the network) using this particular Dna is normal priority - if the priority is not specified by the DTE. If this attribute is set to high then the default priority for outgoing calls using this particular Dna is high priority. This option can be also included in X.25 signalling, in such case it will be overruled. | |||
| OBJECT-TYPE | |||
| INTEGER | normal(0), high(1) | ||
| mscAppnDnaOutDefaultPathSensitivity | 1.3.6.1.4.1.562.36.2.1.110.2.12.1.11 | ||
| This attribute specifies the default class of routing for delay/ throughput sensitive routing for all outgoing calls (from the DTE to the network) using this particular Dna. The chosen default class of routing applies to all outgoing calls established using this Dna, and applies to the packets travelling in both directions on all outgoing calls (local to remote, and remote to local). For incoming calls, the default class of routing is chosen by the calling party (as opposed to DPN, where either end of the call can choose the default routing class). This attribute, if set to a value of throughput, indicates that the default class of routing is throughput sensitive routing. If set to a value of delay, then the default class of routing is delay sensitive routing. In the future, the class of routing sensitivity may be overridden at the calling end of the call as follows: The default class of routing sensitivity can be overridden by the DTE in the call request packet through the TDS&I (Transit Delay Selection & Indication) facility if the DTE supports this facility. Whether or not the DTE is permitted to signal the TDS&I facility will depend on the DTE (i.e.: TDS&I is supported in X.25 only), and will depend on whether the port is configured to permit the TDS&I facility. In Passport, the treatment of DTE facilities (for example, NUI, RPOA, and TDS&I) is not fully defined yet since it is not required. At the point in time when it is required, the parameter to control whether or not the DTE is permitted to signal the TDS&I will be in a Facility Treatment component. Currently, the default is to disallow the TDS&I facility from the DTE. | |||
| OBJECT-TYPE | |||
| INTEGER | throughput(0), delay(1) | ||
| mscAppnDnaOutPathSensitivityOverRide | 1.3.6.1.4.1.562.36.2.1.110.2.12.1.12 | ||
| If this attribute is set to yes in the call request, the called end will use the calling end provisioning data on sensitivity to override its provisioning data, | |||
| OBJECT-TYPE | |||
| INTEGER | no(0), yes(1) | ||
| mscAppnDnaOutDefaultPathReliability | 1.3.6.1.4.1.562.36.2.1.110.2.12.1.14 | ||
| This attribute specifies the default class of routing for reliability routing for all outgoing calls (from the DTE to the network) using this particular Dna. The chosen default class of routing applies to all outgoing calls established using this Dna, and applies to the packets travelling in both directions on all outgoing calls (local to remote, and remote to local). For incoming calls, the default class of routing is chosen by the calling party (as opposed to DPN, where either end of the call can choose the default routing class). This attribute, if set to a value of normal, indicates that the default class of routing is normal reliability routing. If set to a value of high, then the default class of routing is high reliability routing. High reliability is the standard choice for most DPN and Passport services. It usually indicates that packets are overflowed or retransmitted at various routing levels. Typically high reliability results in duplication and disordering of packets in the network when errors are detected or during link congestion. However, the Vc handles the duplication and disordering to ensure that packets are delivered to the DTE properly. For the Frame Relay service, duplication of packets is not desired, in which case, normal reliability may be chosen as the preferred class of routing. | |||
| OBJECT-TYPE | |||
| INTEGER | high(0), normal(1) | ||
| mscAppnDnaOutAccess | 1.3.6.1.4.1.562.36.2.1.110.2.12.1.17 | ||
| This attribute is an extension of the Closed User Group (CUG) facility, as follows: This attribute, if set to a value of allowed indicates that outgoing calls (from the DTE to the network) to the open (non-CUG) part of the network are permitted. It also permits outgoing calls to DTEs that have Incoming Access capabilities. If set to a value of disallowed, then such calls cannot be made using this Dna - such calls will be cleared by the local DCE. This attribute corresponds to the CCITT 'Closed User Group with Outgoing Access' feature for Dna's in that outgoing access is granted if this attribute is set to a value of allowed. | |||
| OBJECT-TYPE | |||
| INTEGER | disallowed(0), allowed(1) | ||
| mscAppnDnaDefaultTransferPriority | 1.3.6.1.4.1.562.36.2.1.110.2.12.1.18 | ||
| This attribute specifies the default transfer priority to network for all outgoing calls using this particular Dna. It is overRidden by the transferPriority provisioned in the DLCI Direct Call sub- component. The transfer priority is a preference specified by an application according to its delay-sensitivity requirement. Frames with high transfer priority are served by the network before the frames with normal priority. Each transfer priority contains a predetermined setting for trunk queue (interrupting, delay or throughput), and routing metric (delay or throughput). When the transfer priority is set at high, the trunk queue is set to high, the routing metric is set to delay. When the transfer priority is set at normal, the trunk queue is set to normal, the routing metric is set to throughput. The default of defaultTransferPriority is normal. | |||
| OBJECT-TYPE | |||
| INTEGER | normal(0), high(9) | ||
| mscAppnDnaTransferPriorityOverRide | 1.3.6.1.4.1.562.36.2.1.110.2.12.1.19 | ||
| When this attribute is set to yes in the call request, the called end will use the calling end provisioning data on transfer priority to override its own provisioning data. If it is set no, the called end will use its own provisioning data on transfer priority. The default of outTransferPriorityOverRide is yes. | |||
| OBJECT-TYPE | |||
| INTEGER | no(0), yes(1) | ||
| mscAppnDnaIncomingOptionsTable | 1.3.6.1.4.1.562.36.2.1.110.2.13 | ||
| IncomingOptions defines set of options for incoming calls. These options are used for calls arriving to the interface represented by Dna. For calls originated from the interface, IncomingOptions attributes are not used. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDnaIncomingOptionsEntry | |||
| mscAppnDnaIncomingOptionsEntry | 1.3.6.1.4.1.562.36.2.1.110.2.13.1 | ||
| An entry in the mscAppnDnaIncomingOptionsTable. | |||
| OBJECT-TYPE | |||
| MscAppnDnaIncomingOptionsEntry | |||
| mscAppnDnaIncAccess | 1.3.6.1.4.1.562.36.2.1.110.2.13.1.9 | ||
| This attribute is an extension of the Closed User Group (CUG) facility, as follows: This attribute, if set to a value of allowed indicates that incoming calls (from the network to the DTE) from the open (non-CUG) part of the network are permitted. It also permits incoming calls from DTEs that have Outgoing Access capabilities. If set to a value of disallowed, then such calls cannot be made to this Dna - such calls will be cleared by the local DCE. This attribute corresponds to the CCITT 'Closed User Group with Incoming Access' feature for Dnas in that incoming access is granted if this attribute is set to a value of allowed. | |||
| OBJECT-TYPE | |||
| INTEGER | disallowed(0), allowed(1) | ||
| mscAppnDnaCallOptionsTable | 1.3.6.1.4.1.562.36.2.1.110.2.14 | ||
| CallOptions group defines additional options for calls not related directly to direction of a call. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDnaCallOptionsEntry | |||
| mscAppnDnaCallOptionsEntry | 1.3.6.1.4.1.562.36.2.1.110.2.14.1 | ||
| An entry in the mscAppnDnaCallOptionsTable. | |||
| OBJECT-TYPE | |||
| MscAppnDnaCallOptionsEntry | |||
| mscAppnDnaDefaultRecvFrmNetworkThruputClass | 1.3.6.1.4.1.562.36.2.1.110.2.14.1.5 | ||
| This attribute indicates the default receive throughput class for all calls using this particular Dna. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..15 | ||
| mscAppnDnaDefaultSendToNetworkThruputClass | 1.3.6.1.4.1.562.36.2.1.110.2.14.1.6 | ||
| This attribute indicates the default send throughput class for all calls using this particular Dna. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..15 | ||
| mscAppnDnaDefaultRecvFrmNetworkWindowSize | 1.3.6.1.4.1.562.36.2.1.110.2.14.1.7 | ||
| This attribute indicates the default number of data packets that can be received by the DTE from the DCE before more packets can be received. This view is oriented with respect to the DTE. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 1..7 | ||
| mscAppnDnaDefaultSendToNetworkWindowSize | 1.3.6.1.4.1.562.36.2.1.110.2.14.1.8 | ||
| This attribute indicates the number of data packets that can be transmitted from the DTE to the DCE and must be acknowledged before more packets can be transmitted. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 1..7 | ||
| mscAppnDnaAccountClass | 1.3.6.1.4.1.562.36.2.1.110.2.14.1.10 | ||
| This attribute specifies the accounting class which is reserved for network operations usage. Its value is returned in the accounting record in the local and remote service type attributes. Use of this attribute is decided by network operator and it is an arbitrary number. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..255 | ||
| mscAppnDnaAccountCollection | 1.3.6.1.4.1.562.36.2.1.110.2.14.1.11 | ||
| This attribute indicates that accounting records are to be collected by the network for the various reasons: billing, test, study, auditing. The last of the parameters, force, indicates that accounting records are to be collected irrespective of other collection reasons. If none of these reasons are set, then accounting will be suppressed. Description of bits: bill(0) test(1) study(2) audit(3) force(4) | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1) | ||
| mscAppnDnaServiceExchange | 1.3.6.1.4.1.562.36.2.1.110.2.14.1.12 | ||
| This attribute is an arbitrary number, entered by the network operator. It is included in the accounting record created by Vc. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..255 | ||
| mscAppnDlci | 1.3.6.1.4.1.562.36.2.1.110.3 | ||
| OBJECT IDENTIFIER | |||
| mscAppnDlciRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.3.1 | ||
| This entry controls the addition and deletion of mscAppnDlci components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDlciRowStatusEntry | |||
| mscAppnDlciRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.3.1.1 | ||
| A single entry in the table represents a single mscAppnDlci component. | |||
| OBJECT-TYPE | |||
| MscAppnDlciRowStatusEntry | |||
| mscAppnDlciRowStatus | 1.3.6.1.4.1.562.36.2.1.110.3.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnDlci components. These components can be added and deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnDlciComponentName | 1.3.6.1.4.1.562.36.2.1.110.3.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnDlciStorageType | 1.3.6.1.4.1.562.36.2.1.110.3.1.1.4 | ||
| This variable represents the storage type value for the mscAppnDlci tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnDlciIndex | 1.3.6.1.4.1.562.36.2.1.110.3.1.1.10 | ||
| This variable represents the index for the mscAppnDlci tables. | |||
| OBJECT-TYPE | |||
| Integer32 | 16..4095 | ||
| mscAppnDlciDc | 1.3.6.1.4.1.562.36.2.1.110.3.2 | ||
| OBJECT IDENTIFIER | |||
| mscAppnDlciDcRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.3.2.1 | ||
| This entry controls the addition and deletion of mscAppnDlciDc components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDlciDcRowStatusEntry | |||
| mscAppnDlciDcRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.3.2.1.1 | ||
| A single entry in the table represents a single mscAppnDlciDc component. | |||
| OBJECT-TYPE | |||
| MscAppnDlciDcRowStatusEntry | |||
| mscAppnDlciDcRowStatus | 1.3.6.1.4.1.562.36.2.1.110.3.2.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnDlciDc components. These components cannot be added nor deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnDlciDcComponentName | 1.3.6.1.4.1.562.36.2.1.110.3.2.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnDlciDcStorageType | 1.3.6.1.4.1.562.36.2.1.110.3.2.1.1.4 | ||
| This variable represents the storage type value for the mscAppnDlciDc tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnDlciDcIndex | 1.3.6.1.4.1.562.36.2.1.110.3.2.1.1.10 | ||
| This variable represents the index for the mscAppnDlciDc tables. | |||
| OBJECT-TYPE | |||
| NonReplicated | |||
| mscAppnDlciDcOptionsTable | 1.3.6.1.4.1.562.36.2.1.110.3.2.10 | ||
| The Options group defines attributes associated with a direct call. It defines a complete connection in terms of path and call options. This connection can be permanent (PVC) or switched (SVC). It can have facilities. The total number of bytes of facilities including the facility codes, and all of the facility data from all of the four classes of facilities: CCITT_Facilities DTE_Facilities National_Facilities International_Facilities must not exceed 512. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDlciDcOptionsEntry | |||
| mscAppnDlciDcOptionsEntry | 1.3.6.1.4.1.562.36.2.1.110.3.2.10.1 | ||
| An entry in the mscAppnDlciDcOptionsTable. | |||
| OBJECT-TYPE | |||
| MscAppnDlciDcOptionsEntry | |||
| mscAppnDlciDcRemoteNpi | 1.3.6.1.4.1.562.36.2.1.110.3.2.10.1.3 | ||
| This attribute specifies the numbering plan used for remoteDna. | |||
| OBJECT-TYPE | |||
| INTEGER | x121(0), e164(1) | ||
| mscAppnDlciDcRemoteDna | 1.3.6.1.4.1.562.36.2.1.110.3.2.10.1.4 | ||
| This attribute specifies the Data Network Address (Dna) of the remote. This is the called (destination) DTE address (Dna) to which this direct call will be sent. Initially, the called DTE address attribute must be present, that is, there must be a valid destination address. However, it may be possible in the future to configure the direct call with a mnemonic address, in which case, this attribute will contain a zero-length Dna, and the mnemonic address will be carried as one of the facilities. | |||
| OBJECT-TYPE | |||
| DigitString | SIZE(1..15) | ||
| mscAppnDlciDcRemoteDlci | 1.3.6.1.4.1.562.36.2.1.110.3.2.10.1.5 | ||
| This attribute provides the remote DLCI (Logical Channel Number) - it is used only for PVCs, where attribute type is set to permanentMaster or permanentSlave or permanentBackupSlave. In switched case, value of remoteDlci is not known when call request is made. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..4095 | ||
| mscAppnDlciDcType | 1.3.6.1.4.1.562.36.2.1.110.3.2.10.1.6 | ||
| This attribute specifies the type of Vc call: permanentMaster, permanentSlave, permanentSlaveWithBackup, permanentBackupSlave. If the value is set to permanentMaster, then a permanent connection will be established between two ends. The remote end must be defined as a permanentSlave, permanentBackupSlave or permanentSlaveWithBackup. The connection cannot be established if the remote end is defined as anything else. The end defined as permanentMaster always initiates the calls. It will attempt to call once per minute. If the value is set to permanentSlave then a permanent connection will be established between 2 ends. The remote end must be defined as a permanentMaster. The connection cannot be established if the remote end is defined as anything else. The permanentSlave end will attempt to call once per minute. If the value is set to permanentSlaveWithBackup then a permanent connection will be established between the 2 ends . The remote end must be defined as a permanentMaster. The Connection cannot be established if the remote end is defined as anything else. The permanentSlaveWithBackup end will attempt to call once per minute. If the value is set to permanentBackupSlave then a permanent connection will be established between the 2 ends only if the permanentMaster end is disconnected from the permanentSlaveWithBackup end and a backup call is established by the redirection system. If the permanentSlaveWithBackup interface becomes visible again, the permanentBackupSlave end is disconnected and the permanentSlaveWithBackup end is reconnected to the permanentMaster end. The permanentBackupSlave end does not try to establish PVC call. | |||
| OBJECT-TYPE | |||
| INTEGER | permanentMaster(1), permanentSlave(2), permanentBackupSlave(3), permanentSlaveWithBackup(4) | ||
| mscAppnDlciDcTransferPriority | 1.3.6.1.4.1.562.36.2.1.110.3.2.10.1.9 | ||
| This attribute specifies the transfer priority to network for the outgoing calls using this particular DLCI. It overRides the defaultTransferPriority provisioned in its associated Dna component. The transfer priority is a preference specified by an application according to its delay-sensitivity requirement. Frames with high transfer priority are served by the network before the frames with normal priority. Each transfer priority contains a predetermined setting for trunk queue (interrupting, delay or throughput), and routing metric (delay or throughput). When the transfer priority is set at high, the trunk queue is set to high, the routing metric is set to delay. When the transfer priority is set at normal, the trunk queue is set to normal, the routing metric is set to throughput. The default of transferPriority is useDnaDefTP. It means using the provisioning value under defaultTransferPriority of its associated Dna for this DLCI. | |||
| OBJECT-TYPE | |||
| INTEGER | normal(0), high(9), useDnaDefTP(255) | ||
| mscAppnDlciDcDiscardPriority | 1.3.6.1.4.1.562.36.2.1.110.3.2.10.1.10 | ||
| This attribute specifies the discard priority for outgoing call using this DLCI. The discard priority has three provisioning values: normal, high, and useDnaDefPriority. Traffic with normal priority are discarded first than the traffic with high priority. The Dna default value (provisioned by outDefaultPriority) is taken if this attribute is set to the value useDnaDefPriority. The default of discardPriority is useDnaDefPriority. | |||
| OBJECT-TYPE | |||
| INTEGER | normal(0), high(1), useDnaDefPriority(3) | ||
| mscAppnDlciDcNfaTable | 1.3.6.1.4.1.562.36.2.1.110.3.2.283 | ||
| Two explicit attributes discardPriority and transferPriority are created to replace H.01 and H.30 in the group VcsDirectCallOptionsProv of this file. The migrate escape here (DcComponent::migrateFaxEscape) propagates the old provisioning data under H.01 and H.30 into discardPriority and transferPriority. The rule of the above propagation are: 0 in H.01 is equivalent to discardPriority 0; 1 in H.01 is equivalent to discardPriority 1. And 0 in H.30 is equivalent to transferPriority normal; 1 in H.30 is equivalent to transferPriority high. Please refer to discardPriority and transferPriority for more information on how to use them. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDlciDcNfaEntry | |||
| mscAppnDlciDcNfaEntry | 1.3.6.1.4.1.562.36.2.1.110.3.2.283.1 | ||
| An entry in the mscAppnDlciDcNfaTable. | |||
| OBJECT-TYPE | |||
| MscAppnDlciDcNfaEntry | |||
| mscAppnDlciDcNfaIndex | 1.3.6.1.4.1.562.36.2.1.110.3.2.283.1.1 | ||
| This variable represents the index for the mscAppnDlciDcNfaTable. | |||
| OBJECT-TYPE | |||
| Integer32 | 1 | 48 | ||
| mscAppnDlciDcNfaValue | 1.3.6.1.4.1.562.36.2.1.110.3.2.283.1.2 | ||
| This variable represents an individual value for the mscAppnDlciDcNfaTable. | |||
| OBJECT-TYPE | |||
| HexString | SIZE(0..128) | ||
| mscAppnDlciDcNfaRowStatus | 1.3.6.1.4.1.562.36.2.1.110.3.2.283.1.3 | ||
| This variable is used to control the addition and deletion of individual values of the mscAppnDlciDcNfaTable. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnDlciVc | 1.3.6.1.4.1.562.36.2.1.110.3.3 | ||
| OBJECT IDENTIFIER | |||
| mscAppnDlciVcRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.3.3.1 | ||
| This entry controls the addition and deletion of mscAppnDlciVc components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDlciVcRowStatusEntry | |||
| mscAppnDlciVcRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.3.3.1.1 | ||
| A single entry in the table represents a single mscAppnDlciVc component. | |||
| OBJECT-TYPE | |||
| MscAppnDlciVcRowStatusEntry | |||
| mscAppnDlciVcRowStatus | 1.3.6.1.4.1.562.36.2.1.110.3.3.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnDlciVc components. These components cannot be added nor deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnDlciVcComponentName | 1.3.6.1.4.1.562.36.2.1.110.3.3.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnDlciVcStorageType | 1.3.6.1.4.1.562.36.2.1.110.3.3.1.1.4 | ||
| This variable represents the storage type value for the mscAppnDlciVc tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnDlciVcIndex | 1.3.6.1.4.1.562.36.2.1.110.3.3.1.1.10 | ||
| This variable represents the index for the mscAppnDlciVc tables. | |||
| OBJECT-TYPE | |||
| NonReplicated | |||
| mscAppnDlciVcCadTable | 1.3.6.1.4.1.562.36.2.1.110.3.3.10 | ||
| This group represents operational call data related to Frame Relay Vc. It can be displayed only for Frame Relay Vc which is created by application. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDlciVcCadEntry | |||
| mscAppnDlciVcCadEntry | 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1 | ||
| An entry in the mscAppnDlciVcCadTable. | |||
| OBJECT-TYPE | |||
| MscAppnDlciVcCadEntry | |||
| mscAppnDlciVcType | 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.1 | ||
| This attribute displays the type of call, pvc,svc or spvc. | |||
| OBJECT-TYPE | |||
| INTEGER | svc(0), pvc(1), spvc(2) | ||
| mscAppnDlciVcState | 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.2 | ||
| This attribute displays the state of call control. P5 state is not supported but is listed for completness. Transitions from one state to another take very short time. state most often displayed is dataTransferP4. | |||
| OBJECT-TYPE | |||
| INTEGER | creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8) | ||
| mscAppnDlciVcPreviousState | 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.3 | ||
| This attribute displays the previous state of call control. This is a valuable field to determine how the processing is progressing. | |||
| OBJECT-TYPE | |||
| INTEGER | creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8) | ||
| mscAppnDlciVcDiagnosticCode | 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.4 | ||
| This attribute displays the internal substate of call control. It is used to further refine state of call processing. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..255 | ||
| mscAppnDlciVcPreviousDiagnosticCode | 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.5 | ||
| This attribute displays the internal substate of call control. It is used to further refine state of call processing. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..255 | ||
| mscAppnDlciVcCalledNpi | 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.6 | ||
| This attribute displays the Numbering Plan Indicator (NPI) of the called end. | |||
| OBJECT-TYPE | |||
| INTEGER | x121(0), e164(1) | ||
| mscAppnDlciVcCalledDna | 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.7 | ||
| This attribute displays the Data Network Address (Dna) of the called (destination) DTE to which this call is sent. This address if defined at recieving end will complete Vc connection. | |||
| OBJECT-TYPE | |||
| DigitString | SIZE(1..15) | ||
| mscAppnDlciVcCalledLcn | 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.8 | ||
| This attribute displays the Logical Channel Number of the called end. It is valid only after both ends of Vc exchanged relevant information. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 1..65535 | ||
| mscAppnDlciVcCallingNpi | 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.9 | ||
| This attribute displays the Numbering Plan Indicator (NPI) of the calling end. | |||
| OBJECT-TYPE | |||
| INTEGER | x121(0), e164(1) | ||
| mscAppnDlciVcCallingDna | 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.10 | ||
| This attribute displays the Data Network Address (Dna) of the calling end. | |||
| OBJECT-TYPE | |||
| DigitString | SIZE(1..15) | ||
| mscAppnDlciVcCallingLcn | 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.11 | ||
| This attribute displays the Logical Channel Number of the calling end. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 1..65535 | ||
| mscAppnDlciVcAccountingEnabled | 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.12 | ||
| This attribute indicates that this optional section of accounting record is suppressed or permitted. If accountingEnabled is yes, conditions for generation of accounting record were met. These conditions include billing options, vc recovery conditions and Module wide accounting data options. | |||
| OBJECT-TYPE | |||
| INTEGER | yes(0), no(1) | ||
| mscAppnDlciVcFastSelectCall | 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.13 | ||
| This attribute displays that this is a fast select call. | |||
| OBJECT-TYPE | |||
| INTEGER | no(0), yes(1) | ||
| mscAppnDlciVcPathReliability | 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.19 | ||
| This attribute displays the path reliability. | |||
| OBJECT-TYPE | |||
| INTEGER | high(0), normal(1) | ||
| mscAppnDlciVcAccountingEnd | 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.20 | ||
| This attribute indicates if this end should generate an accounting record. Normally, callingEnd is the end to generate an accounting record. | |||
| OBJECT-TYPE | |||
| INTEGER | callingEnd(0), calledEnd(1) | ||
| mscAppnDlciVcPriority | 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.21 | ||
| This attribute displays whether the call is a normal or a high priority call. | |||
| OBJECT-TYPE | |||
| INTEGER | normal(0), high(1) | ||
| mscAppnDlciVcSegmentSize | 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.22 | ||
| This attribute displays the segment size (in bytes) used on the call. It is used to calculate the number of segments transmitted and received. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..4096 | ||
| mscAppnDlciVcMaxSubnetPktSize | 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.27 | ||
| This attribute indicates the maximum packet size allowed on the Vc. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..4096 | ||
| mscAppnDlciVcRcosToNetwork | 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.28 | ||
| This attribute indicates the routing metric routing class of service to the network. | |||
| OBJECT-TYPE | |||
| INTEGER | throughput(0), delay(1), multimedia(2) | ||
| mscAppnDlciVcRcosFromNetwork | 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.29 | ||
| This attribute displays the routing metric Routing Class of Service from the Network. | |||
| OBJECT-TYPE | |||
| INTEGER | throughput(0), delay(1), multimedia(2) | ||
| mscAppnDlciVcEmissionPriorityToNetwork | 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.30 | ||
| This attribute displays the network internal emission priotity to the network. | |||
| OBJECT-TYPE | |||
| INTEGER | normal(0), high(1), interrupting(2) | ||
| mscAppnDlciVcEmissionPriorityFromNetwork | 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.31 | ||
| This attribute displays the network internal emission priotity from the network. | |||
| OBJECT-TYPE | |||
| INTEGER | normal(0), high(1), interrupting(2) | ||
| mscAppnDlciVcDataPath | 1.3.6.1.4.1.562.36.2.1.110.3.3.10.1.32 | ||
| This attribute indicates the data path used by the connection. The data path is provisioned in Dna and DirectCall components. The displayed value of this attribute can be different from the provisioned value. If the connection is using dprsOnly data path, the string dprsOnly is displayed. (dynamic packet routing system) If the connection is using dprsMcsOnly data path, the string dprsMcsOnly is displayed. If the connection is using dprsMcsFirst data path, the string dprsMcsFirst is displayed. | |||
| OBJECT-TYPE | |||
| AsciiString | SIZE(0..32) | ||
| mscAppnDlciVcIntdTable | 1.3.6.1.4.1.562.36.2.1.110.3.3.11 | ||
| This group defines display of interval data collected by Vc. Data in this group is variable and may depend on time when this display command is issued. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDlciVcIntdEntry | |||
| mscAppnDlciVcIntdEntry | 1.3.6.1.4.1.562.36.2.1.110.3.3.11.1 | ||
| An entry in the mscAppnDlciVcIntdTable. | |||
| OBJECT-TYPE | |||
| MscAppnDlciVcIntdEntry | |||
| mscAppnDlciVcCallReferenceNumber | 1.3.6.1.4.1.562.36.2.1.110.3.3.11.1.1 | ||
| This attribute displays the call reference number which is a unique number generated by the switch.The same Call Reference Number is stored in the interval data (accounting record) at both ends of the call. It can be used as one of the attributes in matching duplicate records generated at each end of the call. | |||
| OBJECT-TYPE | |||
| Hex | 0..16777215 | ||
| mscAppnDlciVcElapsedTimeTillNow | 1.3.6.1.4.1.562.36.2.1.110.3.3.11.1.2 | ||
| This attribute displays the elapsed time representing the period of this interval data. It is elapsed time in 0.1 second increments since Vc started. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..16777215 | ||
| mscAppnDlciVcSegmentsRx | 1.3.6.1.4.1.562.36.2.1.110.3.3.11.1.3 | ||
| This attribute displays the number of segments received at the time command was issued. This is the segment received count maintained by accounting at each end of the Vc. This counter is updated only when the packet cannot be successfully delivered out of the sink Vc and to the sink AP Conditions in which packets may be discarded by the sink Vc include: missing packets due to subnet discards, segmentation protocol violations due to subnet discard, duplicated and out-of-ranged packets and packets that arrive while Vc is in path recovery state. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..16777215 | ||
| mscAppnDlciVcSegmentsSent | 1.3.6.1.4.1.562.36.2.1.110.3.3.11.1.4 | ||
| This attribute displays the number of segments sent at the time command was issued. This is the segment sent count maintained by accounting at the source Vc. Vc only counts packets that Vc thinks can be delivered successfully into the subnet. In reality, these packets may be dropped by trunking, for instance. This counter is not updated when splitting fails, when Vc is in a path recovery state, when packet forwarding fails to forward this packet and when subsequent packets have to be discarded as we want to minimize the chance of out-of-sequence and do not intentionally send out-of- sequenced packets into the subnet. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..16777215 | ||
| mscAppnDlciVcStartTime | 1.3.6.1.4.1.562.36.2.1.110.3.3.11.1.5 | ||
| This attribute displays the start time of this interval period. If Vc spans 12 hour time or time of day change startTime reflects new time as recorded at 12 hour periods or time of day changes. | |||
| OBJECT-TYPE | |||
| EnterpriseDateAndTime | SIZE(0 | 19) | ||
| mscAppnDlciVcFrdTable | 1.3.6.1.4.1.562.36.2.1.110.3.3.12 | ||
| This group defines Frame Relay attributes collected by Frame Relay Vc. The purpose of Vc attributes is to aid end users and verification people to understand the Vc internal behavior. This is particularly useful when the network has experienced abnormality and we want to isolate problems and pinpoint trouble spots. Attributes are collected on a per Vc basis. Until a need is identified, statistics are not collected at a processor level. Each attribute is stored in a 32 bit field and is initialized to zero when a Vc enters into the data transfer state. When a PVC is disconnected and then connected again, the attributes will be reset. Attributes cannot be reset through other methods. Frame Relay Vc uses a best effort data packet delivery protocol and a different packet segmentation and combination methods from the General Vc. The Frame Relay Vc uses the same call setup and control mechanism (e.g. the support of non-flow control data packets) as in a General Vc. Most General Vc statistics and internal variables are used in a Frame Relay Vc and are displayed by software developers | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDlciVcFrdEntry | |||
| mscAppnDlciVcFrdEntry | 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1 | ||
| An entry in the mscAppnDlciVcFrdTable. | |||
| OBJECT-TYPE | |||
| MscAppnDlciVcFrdEntry | |||
| mscAppnDlciVcFrmCongestedToSubnet | 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.2 | ||
| This attribute displays the number of frames from link discarded due to lack of resources. It keeps track of the number of frames from link that have to be discarded. The discard reasons include insufficient memory for splitting the frame into smaller subnet packet size. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..5000 | ||
| mscAppnDlciVcCannotForwardToSubnet | 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.3 | ||
| This attribute displays the number of discarded packets that can not be forwarded into the subnet because of subnet congestion. Number of frames from link discarded due to failure in forwarding a packet from Vc into the subnet.- This attribute is increased when packet forwarding fails to forward a packet into the subnet. If a frame is split into multiple subnet packets and a partial packet has to be discarded, all subsequent partial packets that have not yet been delivered to the subnet will be discarded as well. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..5000 | ||
| mscAppnDlciVcNotDataXferToSubnet | 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.4 | ||
| This attribute records the number of frames from link discarded when the Vc tries to recover from internal path failure. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..5000 | ||
| mscAppnDlciVcOutOfRangeFrmFromSubnet | 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.5 | ||
| This attribute displays the number of frames from subnet discarded due to out of sequence range for arriving too late. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..5000 | ||
| mscAppnDlciVcCombErrorsFromSubnet | 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.6 | ||
| This attribute records the number of subnet packets discarded at the sink Vc due to the Vc segmentation and combination protocol error. Usually, this occurs when the subnet discards packets and thus this statistics can be used to guest the number of subnet packets that are not delivered to the Vc. It cannot be used as an actual measure because some subnet packets may have been delivered to Vc but have to be discarded because these are partial packets to a frame in which some other partial packets have not been properly delivered to Vc | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..5000 | ||
| mscAppnDlciVcDuplicatesFromSubnet | 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.7 | ||
| This attribute displays the number of subnet packets discarded due to duplication. Although packets are not retransmitted by the Frame Relay Vc, it is possible for the subnet to retransmit packets. When packets are out-of-sequenced and copies of the same packets arrive, then this attribute is increased. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..5000 | ||
| mscAppnDlciVcNotDataXferFromSubnet | 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.8 | ||
| This attribute displays the number of subnet packets discarded when data transfer is suspended in Vc recovery. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..5000 | ||
| mscAppnDlciVcFrmLossTimeouts | 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.9 | ||
| This attribute displays the number of lost frame timer expiries. When this count is excessive, the network is very congested and packets have been discarded in the subnet. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..5000 | ||
| mscAppnDlciVcOoSeqByteCntExceeded | 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.10 | ||
| This attribute displays the number times that the out of sequence byte threshold is exceeded. When the threshold is exceeded, this condition is treated as if the loss frame timer has expired and all frames queued at the sink Vc are delivered to the AP. We need to keep this count to examine if the threshold is engineered properly. This should be used in conjunction with the peak value of out-of- sequenced queue and the number of times the loss frame timer has expired. This count should be relatively small when compared with loss frame timer expiry count. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..5000 | ||
| mscAppnDlciVcPeakOoSeqPktCount | 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.11 | ||
| This attribute displays the frame relay peak packet count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced queue. The counter can be used to deduce the message buffer requirement on a Vc. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..5000 | ||
| mscAppnDlciVcPeakOoSeqFrmForwarded | 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.12 | ||
| This attribute displays the frame relay peak size of the sequence packet queue. The subnet may deliver packets out-of- sequenced. These packets are then queued in an out-of-sequenced queue, waiting for a packet with the expected sequence number to come. When that packet arrives, this attribute records the maximum number of packets that were out-of-sequenced, but now have become in-sequenced. The statistics is used to measure expected queue size due to normal subnet packet disorder (not due to subnet packet discard). Current implementation also uses this statistics to set a maximum size for the out-of-sequenced queue. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..5000 | ||
| mscAppnDlciVcSendSequenceNumber | 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.13 | ||
| This attribute displays the Vc internal packet's send sequence number. Note that a 'packet' in this context, may be either a user data packet, or an OAM frame. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..5000 | ||
| mscAppnDlciVcPktRetryTimeouts | 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.15 | ||
| This attribute displays the number of packets which have retransmission time-outs. When this count is excessive, the network is very congested and packets have been discarded in the subnet. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..5000 | ||
| mscAppnDlciVcPeakRetryQueueSize | 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.16 | ||
| This attribute displays the peak size of retransmission queue. This attribute is used as an indicator of the acknowledgment behavior across the subnet. Records the largest body of unacknowledged packets. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..5000 | ||
| mscAppnDlciVcSubnetRecoveries | 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.17 | ||
| This attribute displays the number of successful Vc recovery attempts. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..5000 | ||
| mscAppnDlciVcOoSeqPktCntExceeded | 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.19 | ||
| This attribute displays the number times that the out of sequence packet threshold is exceeded. When the threshold is exceeded, this condition is treated as if the loss frame timer has expired and all frames queued at the sink Vc are delivered to the AP. We need to keep this count to examine if the threshold is engineered properly. This should be used in conjunction with the peak value of out-of- sequenced queue and the number of times the loss frame timer has expired. This count should be relatively small when compared with loss frame timer expiry count. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..255 | ||
| mscAppnDlciVcPeakOoSeqByteCount | 1.3.6.1.4.1.562.36.2.1.110.3.3.12.1.20 | ||
| This attribute displays the frame relay peak byte count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced queue. The counter can be used to deduce the message buffer requirement on a Vc. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..50000 | ||
| mscAppnDlciVcDmepTable | 1.3.6.1.4.1.562.36.2.1.110.3.3.417 | ||
| This attribute displays the data path used by the connection. Data path is provisioned in Dna and DirectCall components. If the connection is using dprsOnly data path, this attribute is empty. If the connection is using dprsMcsOnly or dprsMcsFirst data path, this attribute displays component name of the dprsMcsEndPoint. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDlciVcDmepEntry | |||
| mscAppnDlciVcDmepEntry | 1.3.6.1.4.1.562.36.2.1.110.3.3.417.1 | ||
| An entry in the mscAppnDlciVcDmepTable. | |||
| OBJECT-TYPE | |||
| MscAppnDlciVcDmepEntry | |||
| mscAppnDlciVcDmepValue | 1.3.6.1.4.1.562.36.2.1.110.3.3.417.1.1 | ||
| This variable represents both the value and the index for the mscAppnDlciVcDmepTable. | |||
| OBJECT-TYPE | |||
| RowPointer | |||
| mscAppnDlciBnnLsDef | 1.3.6.1.4.1.562.36.2.1.110.3.4 | ||
| OBJECT IDENTIFIER | |||
| mscAppnDlciBnnLsDefRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.3.4.1 | ||
| This entry controls the addition and deletion of mscAppnDlciBnnLsDef components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDlciBnnLsDefRowStatusEntry | |||
| mscAppnDlciBnnLsDefRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.3.4.1.1 | ||
| A single entry in the table represents a single mscAppnDlciBnnLsDef component. | |||
| OBJECT-TYPE | |||
| MscAppnDlciBnnLsDefRowStatusEntry | |||
| mscAppnDlciBnnLsDefRowStatus | 1.3.6.1.4.1.562.36.2.1.110.3.4.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnDlciBnnLsDef components. These components can be added and deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnDlciBnnLsDefComponentName | 1.3.6.1.4.1.562.36.2.1.110.3.4.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnDlciBnnLsDefStorageType | 1.3.6.1.4.1.562.36.2.1.110.3.4.1.1.4 | ||
| This variable represents the storage type value for the mscAppnDlciBnnLsDef tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnDlciBnnLsDefIndex | 1.3.6.1.4.1.562.36.2.1.110.3.4.1.1.10 | ||
| This variable represents the index for the mscAppnDlciBnnLsDef tables. | |||
| OBJECT-TYPE | |||
| Integer32 | 4 | 8 | 12 | 16 | 20 | 24 | 28 | 32 | 36 | 40 | 44 | 48 | 52 | 56 | 60 | 64 | 68 | 72 | 76 | 80 | 84 | 88 | 92 | 96 | 100 | 104 | 108 | 112 | 116 | 120 | 124 | 128 | 132 | 136 | 140 | 144 | 148 | 152 | 156 | 160 | 164 | 168 | 172 | 176 | 180 | 184 | 188 | 192 | 196 | 200 | 204 | 208 | 212 | 216 | 220 | 224 | 228 | 232 | 236 | 240 | 244 | 248 | 252 | ||
| mscAppnDlciBnnLsDefProvTable | 1.3.6.1.4.1.562.36.2.1.110.3.4.2 | ||
| This group contains the provisioning data for a Link Station on a frame relay DLCI. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDlciBnnLsDefProvEntry | |||
| mscAppnDlciBnnLsDefProvEntry | 1.3.6.1.4.1.562.36.2.1.110.3.4.2.1 | ||
| An entry in the mscAppnDlciBnnLsDefProvTable. | |||
| OBJECT-TYPE | |||
| MscAppnDlciBnnLsDefProvEntry | |||
| mscAppnDlciBnnLsDefDspuService | 1.3.6.1.4.1.562.36.2.1.110.3.4.2.1.1 | ||
| This attribute specifies which down stream physical unit service is supported on this Link Station. | |||
| OBJECT-TYPE | |||
| INTEGER | none(0), dlur(2) | ||
| mscAppnDlciBnnLsDefAdjacentCpName | 1.3.6.1.4.1.562.36.2.1.110.3.4.2.1.2 | ||
| This attribute specifies the fully qualified control point (FQCP) name of the adjacent node. This attribute is ignored if the adjacent node is not an APPN node. If this attribute is not empty it is checked against the name received from the adjacent node during the XID exchange, unless adjacentCpType is set to backLevelLenNode (in which case it is used to identify the adjacent node). The first portion of this name, up to the period, is the network identifier for the network to which the adjacent node belongs. An APPN network is a portion of a virtual private network which has a separately administered name space. This network identifier is the implicit qualifier of all resources which do not have an explicit network identifier. | |||
| OBJECT-TYPE | |||
| AsciiString | SIZE(0..17) | ||
| mscAppnDlciBnnLsDefAdjacentCpType | 1.3.6.1.4.1.562.36.2.1.110.3.4.2.1.3 | ||
| This attribute specifies the adjacent control point (CP) type: networkNode - Specifies that the adjacent device is an APPN network node. endNode - Specifies that the adjacent device is an APPN end node. appnNode - Specifies that the adjacent device is an APPN node or an up-level LEN node, and the node type will be dynamically determined during XID exchange. backLevelLenNode - Specifies that the adjacent device is a back- level LEN node. hostXID3 - Specifies that the adjacent device is a host and that this APPN node should respond to a polling XID from the node with a format 3 XID. hostXID0 - Specifies that the adjacent device is a host and that this APPN node should respond to a polling XID from the node with a format 0 XID. dlurXID - Specifies that the adjacent device is a downstream PU requiring DLUR services and XID exchange in link activation dlurNoXID - Specifies that the adjacent device is a downstream PU requiring DLUR services and no XID exchange in link activation | |||
| OBJECT-TYPE | |||
| INTEGER | appnNode(0), networkNode(2), endNode(3), backLevelLenNode(5), hostXID3(6), hostXID0(7), dlurXID(8), dlurNoXID(9) | ||
| mscAppnDlciBnnLsDefTgNum | 1.3.6.1.4.1.562.36.2.1.110.3.4.2.1.5 | ||
| This attribute specifies the TG number to be used for this link. It is only relevant if the adjacent device is an APPN node and is ignored otherwise. If adjacentCpType is set to backLevelLenNode this attribute is ignored and the TG number is assumed to be 1. If this attribute is set to zero (0), the TG number is dynamically assigned and can be determined from the tgNum attribute of the related LinkStation component. If this attribute is non-zero, the adjacentCpType must be set to appnNode, networkNode, endNode or backLevelLenNode, and the TG number on the adjacent device must also be set to the same value. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..20 | ||
| mscAppnDlciBnnLsDefDlusName | 1.3.6.1.4.1.562.36.2.1.110.3.4.2.1.6 | ||
| This attribute specifies the fully qualified control point (FQCP) name of the primary DLUS for this link station. This attribute is ignored if the adjacent device does not request DLUR services. This attribute overrides the primaryDefDlusName and secondaryDefDlusName specified in the DLUR component. If this attribute is empty, the primaryDefDlusName (specified in the DLUR component), or secondaryDefDlusName (specified in the DLUR component) will be used. The first portion of this name, up to the period, is the network identifier for the network to which the DLUS node belongs. An APPN network is a portion of a virtual private network which has a separately administered name space. This network identifier is the implicit qualifier of all resources which do not have an explicit network identifier. | |||
| OBJECT-TYPE | |||
| AsciiString | SIZE(0..17) | ||
| mscAppnDlciBnnLsDefBackupDlusName | 1.3.6.1.4.1.562.36.2.1.110.3.4.2.1.7 | ||
| This attribute specifies the fully qualified control point (FQCP) name of the backup DLUS for this link station. This attribute is ignored if the adjacent device does not request DLUR services. This attribute overrides the primaryDefDlusName and secondaryDefDlusName specified in the DLUR component. If this attribute is empty and the dlusName attribute is empty, the primaryDefDlusName (specified in the DLUR component), or secondaryDefDlusName (specified in the DLUR component) will be used. If this attribute is specified, the dlusName attribute must also contain a non-empty string. The first portion of this name, up to the period, is the network identifier for the network to which the DLUS node belongs. An APPN network is a portion of a virtual private network which has a separately administered name space. This network identifier is the implicit qualifier of all resources which do not have an explicit network identifier. | |||
| OBJECT-TYPE | |||
| AsciiString | SIZE(0..17) | ||
| mscAppnDlciBnnLsDefHprSupported | 1.3.6.1.4.1.562.36.2.1.110.3.4.2.1.8 | ||
| This attribute specifies whether high performance routing (HPR) is supported on this link station. If this attribute is set to sameAsNode, and the hprSupport attribute in the APPN component is set to either rtp or anr, HPR will be negotiated with the remote node, if the hprSupport attrbute in the APPN component is set to no HPR will not be negotiated with the remote node. If this attribute is set to no, HPR will not be negotiated on this link station. The results of this negotiation are visible in the hprSupport attribute of the related LinkStation component | |||
| OBJECT-TYPE | |||
| INTEGER | no(0), sameAsNode(1) | ||
| mscAppnDlciBnnLsDefAdjacentNodeID | 1.3.6.1.4.1.562.36.2.1.110.3.4.2.1.9 | ||
| This attribute specifies the node id of the adjacent device. This attribute, if non-zero, is used to check the identity of the adjacent device. If this attribute is zero, the identity is not checked. If adjacentCpType is set to dlurNoXID, this attribute is used to identify the downstream PU to the DLUS. | |||
| OBJECT-TYPE | |||
| Hex | 0..4294967295 | ||
| mscAppnDlciBnnLsDefCpCpSessionSupport | 1.3.6.1.4.1.562.36.2.1.110.3.4.2.1.10 | ||
| This attribute specifies whether this link station supports CP-CP sessions. This attribute is ignored if the adjacent device is not an APPN node. | |||
| OBJECT-TYPE | |||
| INTEGER | no(0), yes(1) | ||
| mscAppnDlciBnnLsDefMaxTxBtuSize | 1.3.6.1.4.1.562.36.2.1.110.3.4.2.1.11 | ||
| This attribute specifies the maximum basic transmission unit (BTU) size that can be sent on this link station. This attribute is used to negotiate the maximum BTU size that can be transmitted between a link station pair. If the link and node are HPR-capable, then this attribute must be set to a value greater than or equal to 768. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 99..32768 | ||
| mscAppnDlciBnnLsDefLsRole | 1.3.6.1.4.1.562.36.2.1.110.3.4.2.1.12 | ||
| This attribute specifies the role for this link station. This attribute will be ignored if adjacentCpType is set to hostXID0 or hostXID3 (the link station will always be secondary), or if adjacentCpType is set to dlurXID or dlurNoXID (the link station will always be primary). | |||
| OBJECT-TYPE | |||
| INTEGER | negotiable(0), primary(1), secondary(2) | ||
| mscAppnDlciSp | 1.3.6.1.4.1.562.36.2.1.110.3.5 | ||
| OBJECT IDENTIFIER | |||
| mscAppnDlciSpRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.3.5.1 | ||
| This entry controls the addition and deletion of mscAppnDlciSp components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDlciSpRowStatusEntry | |||
| mscAppnDlciSpRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.3.5.1.1 | ||
| A single entry in the table represents a single mscAppnDlciSp component. | |||
| OBJECT-TYPE | |||
| MscAppnDlciSpRowStatusEntry | |||
| mscAppnDlciSpRowStatus | 1.3.6.1.4.1.562.36.2.1.110.3.5.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnDlciSp components. These components cannot be added nor deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnDlciSpComponentName | 1.3.6.1.4.1.562.36.2.1.110.3.5.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnDlciSpStorageType | 1.3.6.1.4.1.562.36.2.1.110.3.5.1.1.4 | ||
| This variable represents the storage type value for the mscAppnDlciSp tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnDlciSpIndex | 1.3.6.1.4.1.562.36.2.1.110.3.5.1.1.10 | ||
| This variable represents the index for the mscAppnDlciSp tables. | |||
| OBJECT-TYPE | |||
| NonReplicated | |||
| mscAppnDlciSpParmsTable | 1.3.6.1.4.1.562.36.2.1.110.3.5.11 | ||
| This group contains the provisionable attributes for the Data Link Connection Identifier. These attributes reflect the service parameters specific to this instance of Dlci. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDlciSpParmsEntry | |||
| mscAppnDlciSpParmsEntry | 1.3.6.1.4.1.562.36.2.1.110.3.5.11.1 | ||
| An entry in the mscAppnDlciSpParmsTable. | |||
| OBJECT-TYPE | |||
| MscAppnDlciSpParmsEntry | |||
| mscAppnDlciSpRateEnforcement | 1.3.6.1.4.1.562.36.2.1.110.3.5.11.1.1 | ||
| This attribute specifies whether rate enforcement is to be used on this DLCI. Turning on rate enforcement means that the data sent from the service to the virtual circuit is subjected to rate control. | |||
| OBJECT-TYPE | |||
| INTEGER | off(0), on(1) | ||
| mscAppnDlciSpCommittedInformationRate | 1.3.6.1.4.1.562.36.2.1.110.3.5.11.1.2 | ||
| This attribute specifies the committed information rate (cir) in bits per second (bit/s). When rateEnforcement is set to on, cir is the rate at which the network agrees to transfer information under normal conditions. This rate is measured over a measurement interval (t) that is determined internally based on cir and the committed burst size (bc). An exception to this occurs when cir is provisioned to be zero, in which case the measurement interval (t) must be provisioned explicitly. This attribute is ignored when rateEnforcement is off. If rateEnforcement is on and this attribute is 0, bc must also be 0. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..50000000 | ||
| mscAppnDlciSpCommittedBurstSize | 1.3.6.1.4.1.562.36.2.1.110.3.5.11.1.3 | ||
| This attribute specifies the committed burst size (bc) in bits. bc is the amount of data that a network agrees to transfer under normal conditions over a measurement interval (t). Data marked DE=1 is not accounted for in bc. This attribute is ignored when rateEnforcement is off. If rateEnforcement is on and this attribute is 0, cir must also be 0. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..50000000 | ||
| mscAppnDlciSpExcessBurstSize | 1.3.6.1.4.1.562.36.2.1.110.3.5.11.1.4 | ||
| This attribute specifies the excess burst size (be) in bits. be is the amount of uncommitted data that the network will attempt to deliver over measurement interval (t). Data marked DE=1 by the user or by the network is accounted for here. cir, bc, and be cannot all be 0 when rateEnforcement is on. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..50000000 | ||
| mscAppnDlciSpMeasurementInterval | 1.3.6.1.4.1.562.36.2.1.110.3.5.11.1.5 | ||
| This attribute specifies the time interval (in milliseconds) over which rates and burst sizes are measured. When cir and bc are 0 and rateEnforcement is on, this attribute must be provisioned. When cir and bc are non-zero, the time interval is internally calculated. In that situation, this attribute is ignored, and is not representative of the time interval. This attribute is also ignored when rateEnforcement is off. If rateEnforcement is on and both cir and bc are 0, this field must be non-zero. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..25500 | ||
| mscAppnDlciBanLsDef | 1.3.6.1.4.1.562.36.2.1.110.3.6 | ||
| OBJECT IDENTIFIER | |||
| mscAppnDlciBanLsDefRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.3.6.1 | ||
| This entry controls the addition and deletion of mscAppnDlciBanLsDef components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDlciBanLsDefRowStatusEntry | |||
| mscAppnDlciBanLsDefRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.3.6.1.1 | ||
| A single entry in the table represents a single mscAppnDlciBanLsDef component. | |||
| OBJECT-TYPE | |||
| MscAppnDlciBanLsDefRowStatusEntry | |||
| mscAppnDlciBanLsDefRowStatus | 1.3.6.1.4.1.562.36.2.1.110.3.6.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnDlciBanLsDef components. These components can be added and deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnDlciBanLsDefComponentName | 1.3.6.1.4.1.562.36.2.1.110.3.6.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnDlciBanLsDefStorageType | 1.3.6.1.4.1.562.36.2.1.110.3.6.1.1.4 | ||
| This variable represents the storage type value for the mscAppnDlciBanLsDef tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnDlciBanLsDefMacIndex | 1.3.6.1.4.1.562.36.2.1.110.3.6.1.1.10 | ||
| This variable represents an index for the mscAppnDlciBanLsDef tables. | |||
| OBJECT-TYPE | |||
| DashedHexString | SIZE(6) | ||
| mscAppnDlciBanLsDefSapIndex | 1.3.6.1.4.1.562.36.2.1.110.3.6.1.1.11 | ||
| This variable represents an index for the mscAppnDlciBanLsDef tables. | |||
| OBJECT-TYPE | |||
| Integer32 | 4 | 8 | 12 | 16 | 20 | 24 | 28 | 32 | 36 | 40 | 44 | 48 | 52 | 56 | 60 | 64 | 68 | 72 | 76 | 80 | 84 | 88 | 92 | 96 | 100 | 104 | 108 | 112 | 116 | 120 | 124 | 128 | 132 | 136 | 140 | 144 | 148 | 152 | 156 | 160 | 164 | 168 | 172 | 176 | 180 | 184 | 188 | 192 | 196 | 200 | 204 | 208 | 212 | 216 | 220 | 224 | 228 | 232 | 236 | 240 | 244 | 248 | 252 | ||
| mscAppnDlciBanLsDefProvTable | 1.3.6.1.4.1.562.36.2.1.110.3.6.2 | ||
| This group contains the provisioning data for a Link Station on a frame relay DLCI. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDlciBanLsDefProvEntry | |||
| mscAppnDlciBanLsDefProvEntry | 1.3.6.1.4.1.562.36.2.1.110.3.6.2.1 | ||
| An entry in the mscAppnDlciBanLsDefProvTable. | |||
| OBJECT-TYPE | |||
| MscAppnDlciBanLsDefProvEntry | |||
| mscAppnDlciBanLsDefDspuService | 1.3.6.1.4.1.562.36.2.1.110.3.6.2.1.1 | ||
| This attribute specifies which down stream physical unit service is supported on this Link Station. | |||
| OBJECT-TYPE | |||
| INTEGER | none(0), dlur(2) | ||
| mscAppnDlciBanLsDefAdjacentCpName | 1.3.6.1.4.1.562.36.2.1.110.3.6.2.1.2 | ||
| This attribute specifies the fully qualified control point (FQCP) name of the adjacent node. This attribute is ignored if the adjacent node is not an APPN node. If this attribute is not empty it is checked against the name received from the adjacent node during the XID exchange, unless adjacentCpType is set to backLevelLenNode (in which case it is used to identify the adjacent node). The first portion of this name, up to the period, is the network identifier for the network to which the adjacent node belongs. An APPN network is a portion of a virtual private network which has a separately administered name space. This network identifier is the implicit qualifier of all resources which do not have an explicit network identifier. | |||
| OBJECT-TYPE | |||
| AsciiString | SIZE(0..17) | ||
| mscAppnDlciBanLsDefAdjacentCpType | 1.3.6.1.4.1.562.36.2.1.110.3.6.2.1.3 | ||
| This attribute specifies the adjacent control point (CP) type: networkNode - Specifies that the adjacent device is an APPN network node. endNode - Specifies that the adjacent device is an APPN end node. appnNode - Specifies that the adjacent device is an APPN node or an up-level LEN node, and the node type will be dynamically determined during XID exchange. backLevelLenNode - Specifies that the adjacent device is a back- level LEN node. hostXID3 - Specifies that the adjacent device is a host and that this APPN node should respond to a polling XID from the node with a format 3 XID. hostXID0 - Specifies that the adjacent device is a host and that this APPN node should respond to a polling XID from the node with a format 0 XID. dlurXID - Specifies that the adjacent device is a downstream PU requiring DLUR services and XID exchange in link activation dlurNoXID - Specifies that the adjacent device is a downstream PU requiring DLUR services and no XID exchange in link activation | |||
| OBJECT-TYPE | |||
| INTEGER | appnNode(0), networkNode(2), endNode(3), backLevelLenNode(5), hostXID3(6), hostXID0(7), dlurXID(8), dlurNoXID(9) | ||
| mscAppnDlciBanLsDefTgNum | 1.3.6.1.4.1.562.36.2.1.110.3.6.2.1.5 | ||
| This attribute specifies the TG number to be used for this link. It is only relevant if the adjacent device is an APPN node and is ignored otherwise. If adjacentCpType is set to backLevelLenNode this attribute is ignored and the TG number is assumed to be 1. If this attribute is set to zero (0), the TG number is dynamically assigned and can be determined from the tgNum attribute of the related LinkStation component. If this attribute is non-zero, the adjacentCpType must be set to appnNode, networkNode, endNode or backLevelLenNode, and the TG number on the adjacent device must also be set to the same value. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..20 | ||
| mscAppnDlciBanLsDefDlusName | 1.3.6.1.4.1.562.36.2.1.110.3.6.2.1.6 | ||
| This attribute specifies the fully qualified control point (FQCP) name of the primary DLUS for this link station. This attribute is ignored if the adjacent device does not request DLUR services. This attribute overrides the primaryDefDlusName and secondaryDefDlusName specified in the DLUR component. If this attribute is empty, the primaryDefDlusName (specified in the DLUR component), or secondaryDefDlusName (specified in the DLUR component) will be used. The first portion of this name, up to the period, is the network identifier for the network to which the DLUS node belongs. An APPN network is a portion of a virtual private network which has a separately administered name space. This network identifier is the implicit qualifier of all resources which do not have an explicit network identifier. | |||
| OBJECT-TYPE | |||
| AsciiString | SIZE(0..17) | ||
| mscAppnDlciBanLsDefBackupDlusName | 1.3.6.1.4.1.562.36.2.1.110.3.6.2.1.7 | ||
| This attribute specifies the fully qualified control point (FQCP) name of the backup DLUS for this link station. This attribute is ignored if the adjacent device does not request DLUR services. This attribute overrides the primaryDefDlusName and secondaryDefDlusName specified in the DLUR component. If this attribute is empty and the dlusName attribute is empty, the primaryDefDlusName (specified in the DLUR component), or secondaryDefDlusName (specified in the DLUR component) will be used. If this attribute is specified, the dlusName attribute must also contain a non-empty string. The first portion of this name, up to the period, is the network identifier for the network to which the DLUS node belongs. An APPN network is a portion of a virtual private network which has a separately administered name space. This network identifier is the implicit qualifier of all resources which do not have an explicit network identifier. | |||
| OBJECT-TYPE | |||
| AsciiString | SIZE(0..17) | ||
| mscAppnDlciBanLsDefHprSupported | 1.3.6.1.4.1.562.36.2.1.110.3.6.2.1.8 | ||
| This attribute specifies whether high performance routing (HPR) is supported on this link station. If this attribute is set to sameAsNode, and the hprSupport attribute in the APPN component is set to either rtp or anr, HPR will be negotiated with the remote node, if the hprSupport attrbute in the APPN component is set to no HPR will not be negotiated with the remote node. If this attribute is set to no, HPR will not be negotiated on this link station. The results of this negotiation are visible in the hprSupport attribute of the related LinkStation component | |||
| OBJECT-TYPE | |||
| INTEGER | no(0), sameAsNode(1) | ||
| mscAppnDlciBanLsDefAdjacentNodeID | 1.3.6.1.4.1.562.36.2.1.110.3.6.2.1.9 | ||
| This attribute specifies the node id of the adjacent device. This attribute, if non-zero, is used to check the identity of the adjacent device. If this attribute is zero, the identity is not checked. If adjacentCpType is set to dlurNoXID, this attribute is used to identify the downstream PU to the DLUS. | |||
| OBJECT-TYPE | |||
| Hex | 0..4294967295 | ||
| mscAppnDlciBanLsDefCpCpSessionSupport | 1.3.6.1.4.1.562.36.2.1.110.3.6.2.1.10 | ||
| This attribute specifies whether this link station supports CP-CP sessions. This attribute is ignored if the adjacent device is not an APPN node. | |||
| OBJECT-TYPE | |||
| INTEGER | no(0), yes(1) | ||
| mscAppnDlciBanLsDefMaxTxBtuSize | 1.3.6.1.4.1.562.36.2.1.110.3.6.2.1.11 | ||
| This attribute specifies the maximum basic transmission unit (BTU) size that can be sent on this link station. This attribute is used to negotiate the maximum BTU size that can be transmitted between a link station pair. If the link and node are HPR-capable, then this attribute must be set to a value greater than or equal to 768. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 99..32768 | ||
| mscAppnDlciBanLsDefLsRole | 1.3.6.1.4.1.562.36.2.1.110.3.6.2.1.12 | ||
| This attribute specifies the role for this link station. This attribute will be ignored if adjacentCpType is set to hostXID0 or hostXID3 (the link station will always be secondary), or if adjacentCpType is set to dlurXID or dlurNoXID (the link station will always be primary). | |||
| OBJECT-TYPE | |||
| INTEGER | negotiable(0), primary(1), secondary(2) | ||
| mscAppnDlciBan | 1.3.6.1.4.1.562.36.2.1.110.3.7 | ||
| OBJECT IDENTIFIER | |||
| mscAppnDlciBanRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.3.7.1 | ||
| This entry controls the addition and deletion of mscAppnDlciBan components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDlciBanRowStatusEntry | |||
| mscAppnDlciBanRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.3.7.1.1 | ||
| A single entry in the table represents a single mscAppnDlciBan component. | |||
| OBJECT-TYPE | |||
| MscAppnDlciBanRowStatusEntry | |||
| mscAppnDlciBanRowStatus | 1.3.6.1.4.1.562.36.2.1.110.3.7.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnDlciBan components. These components can be added and deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnDlciBanComponentName | 1.3.6.1.4.1.562.36.2.1.110.3.7.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnDlciBanStorageType | 1.3.6.1.4.1.562.36.2.1.110.3.7.1.1.4 | ||
| This variable represents the storage type value for the mscAppnDlciBan tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnDlciBanIndex | 1.3.6.1.4.1.562.36.2.1.110.3.7.1.1.10 | ||
| This variable represents the index for the mscAppnDlciBan tables. | |||
| OBJECT-TYPE | |||
| NonReplicated | |||
| mscAppnDlciBanProvTable | 1.3.6.1.4.1.562.36.2.1.110.3.7.2 | ||
| This group contains the provisioning data for the local link address (MAP,SAP pair) to be used for a Frame Relay connection with BAN encapsulation. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDlciBanProvEntry | |||
| mscAppnDlciBanProvEntry | 1.3.6.1.4.1.562.36.2.1.110.3.7.2.1 | ||
| An entry in the mscAppnDlciBanProvTable. | |||
| OBJECT-TYPE | |||
| MscAppnDlciBanProvEntry | |||
| mscAppnDlciBanLocalMac | 1.3.6.1.4.1.562.36.2.1.110.3.7.2.1.1 | ||
| This attribute specifies the MAC address to be used for a Frame Relay connection with BAN encapsulation. | |||
| OBJECT-TYPE | |||
| DashedHexString | SIZE(6) | ||
| mscAppnDlciBanLocalSap | 1.3.6.1.4.1.562.36.2.1.110.3.7.2.1.2 | ||
| This attribute specifies the local SAP number to be used for a Frame Relay connection with BAN encapsulation. | |||
| OBJECT-TYPE | |||
| Hex | 4 | 8 | 12 | 16 | 20 | 24 | 28 | 32 | 36 | 40 | 44 | 48 | 52 | 56 | 60 | 64 | 68 | 72 | 76 | 80 | 84 | 88 | 92 | 96 | 100 | 104 | 108 | 112 | 116 | 120 | 124 | 128 | 132 | 136 | 140 | 144 | 148 | 152 | 156 | 160 | 164 | 168 | 172 | 176 | 180 | 184 | 188 | 192 | 196 | 200 | 204 | 208 | 212 | 216 | 220 | 224 | 228 | 232 | 236 | 240 | 244 | 248 | 252 | ||
| mscAppnDlciStateTable | 1.3.6.1.4.1.562.36.2.1.110.3.10 | ||
| This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDlciStateEntry | |||
| mscAppnDlciStateEntry | 1.3.6.1.4.1.562.36.2.1.110.3.10.1 | ||
| An entry in the mscAppnDlciStateTable. | |||
| OBJECT-TYPE | |||
| MscAppnDlciStateEntry | |||
| mscAppnDlciAdminState | 1.3.6.1.4.1.562.36.2.1.110.3.10.1.1 | ||
| This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. | |||
| OBJECT-TYPE | |||
| INTEGER | locked(0), unlocked(1), shuttingDown(2) | ||
| mscAppnDlciOperationalState | 1.3.6.1.4.1.562.36.2.1.110.3.10.1.2 | ||
| This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(0), enabled(1) | ||
| mscAppnDlciUsageState | 1.3.6.1.4.1.562.36.2.1.110.3.10.1.3 | ||
| This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. | |||
| OBJECT-TYPE | |||
| INTEGER | idle(0), active(1), busy(2) | ||
| mscAppnDlciSpOpTable | 1.3.6.1.4.1.562.36.2.1.110.3.12 | ||
| This group contains the actual service parameters in use for this instance of Dlci. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDlciSpOpEntry | |||
| mscAppnDlciSpOpEntry | 1.3.6.1.4.1.562.36.2.1.110.3.12.1 | ||
| An entry in the mscAppnDlciSpOpTable. | |||
| OBJECT-TYPE | |||
| MscAppnDlciSpOpEntry | |||
| mscAppnDlciRateEnforcement | 1.3.6.1.4.1.562.36.2.1.110.3.12.1.1 | ||
| This attribute indicates whether rate enforcement is in use for this Dlci. | |||
| OBJECT-TYPE | |||
| INTEGER | off(0), on(1) | ||
| mscAppnDlciCommittedInformationRate | 1.3.6.1.4.1.562.36.2.1.110.3.12.1.2 | ||
| This attribute indicates the current effective committed information rate (cir) in bits per second (bit/s). cir is the rate at which the network agrees to transfer data with Discard Eligiblity indication DE=0 under normal conditions. This attribute should be ignored when rateEnforcement is off. | |||
| OBJECT-TYPE | |||
| Gauge32 | 0..4294967295 | ||
| mscAppnDlciCommittedBurstSize | 1.3.6.1.4.1.562.36.2.1.110.3.12.1.3 | ||
| This attribute indicates the committed burst size (bc) in bits. bc is the amount of data that the network agrees to transfer under normal conditions over a measurement interval (t). bc is used for data with Discard Eligibility indication DE=0. DE=1 data does not use bc at all, excessBurstSize if is used instead. This attribute should be ignored when rateEnforcement is off. | |||
| OBJECT-TYPE | |||
| Gauge32 | 0..4294967295 | ||
| mscAppnDlciExcessInformationRate | 1.3.6.1.4.1.562.36.2.1.110.3.12.1.4 | ||
| This attribute indicates the current effective excess information rate (eir) in bits per second (bit/s). eir is the rate at which the network agrees to transfer data with Discard Eligibility indication DE=1 under normal conditions. DE can be set by the user or the network. DE indication of a data frame is set to 1 by the network after cir has been exceeded while eir is still available for data transfer. | |||
| OBJECT-TYPE | |||
| Gauge32 | 0..4294967295 | ||
| mscAppnDlciExcessBurstSize | 1.3.6.1.4.1.562.36.2.1.110.3.12.1.5 | ||
| This attribute indicates the excess burst size (be) in bits. be is the amount of uncommitted data that the network will attempt to deliver over measurement interval (t). Data marked DE=1 by the user or by the network is accounted for here. This attribute should be ignored when rateEnforcement is off. | |||
| OBJECT-TYPE | |||
| Gauge32 | 0..2048000 | ||
| mscAppnDlciMeasurementInterval | 1.3.6.1.4.1.562.36.2.1.110.3.12.1.6 | ||
| This attribute indicates the time interval (in milliseconds) over which rates and burst sizes are measured. This attribute should be ignored when rateEnforcement is off. | |||
| OBJECT-TYPE | |||
| Gauge32 | 0..25500 | ||
| mscAppnLcn | 1.3.6.1.4.1.562.36.2.1.110.4 | ||
| OBJECT IDENTIFIER | |||
| mscAppnLcnRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.4.1 | ||
| This entry controls the addition and deletion of mscAppnLcn components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnLcnRowStatusEntry | |||
| mscAppnLcnRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.4.1.1 | ||
| A single entry in the table represents a single mscAppnLcn component. | |||
| OBJECT-TYPE | |||
| MscAppnLcnRowStatusEntry | |||
| mscAppnLcnRowStatus | 1.3.6.1.4.1.562.36.2.1.110.4.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnLcn components. These components can be added and deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnLcnComponentName | 1.3.6.1.4.1.562.36.2.1.110.4.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnLcnStorageType | 1.3.6.1.4.1.562.36.2.1.110.4.1.1.4 | ||
| This variable represents the storage type value for the mscAppnLcn tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnLcnIndex | 1.3.6.1.4.1.562.36.2.1.110.4.1.1.10 | ||
| This variable represents the index for the mscAppnLcn tables. | |||
| OBJECT-TYPE | |||
| Integer32 | 1..4095 | ||
| mscAppnLcnDc | 1.3.6.1.4.1.562.36.2.1.110.4.2 | ||
| OBJECT IDENTIFIER | |||
| mscAppnLcnDcRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.4.2.1 | ||
| This entry controls the addition and deletion of mscAppnLcnDc components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnLcnDcRowStatusEntry | |||
| mscAppnLcnDcRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.4.2.1.1 | ||
| A single entry in the table represents a single mscAppnLcnDc component. | |||
| OBJECT-TYPE | |||
| MscAppnLcnDcRowStatusEntry | |||
| mscAppnLcnDcRowStatus | 1.3.6.1.4.1.562.36.2.1.110.4.2.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnLcnDc components. These components cannot be added nor deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnLcnDcComponentName | 1.3.6.1.4.1.562.36.2.1.110.4.2.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnLcnDcStorageType | 1.3.6.1.4.1.562.36.2.1.110.4.2.1.1.4 | ||
| This variable represents the storage type value for the mscAppnLcnDc tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnLcnDcIndex | 1.3.6.1.4.1.562.36.2.1.110.4.2.1.1.10 | ||
| This variable represents the index for the mscAppnLcnDc tables. | |||
| OBJECT-TYPE | |||
| NonReplicated | |||
| mscAppnLcnDcOptionsTable | 1.3.6.1.4.1.562.36.2.1.110.4.2.10 | ||
| Options group defines attributes associated with direct call. It defines complete connection in terms of path and call options. This connection can be permanent (pvc) or switched (svc). It can have facilities. The total number of bytes of facilities including the facility codes, and all of the facility data from all of the four classes of facilities: CCITT_Facilities DTE_Facilities National_Facilities International_Facilities must not exceed 512 bytes. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnLcnDcOptionsEntry | |||
| mscAppnLcnDcOptionsEntry | 1.3.6.1.4.1.562.36.2.1.110.4.2.10.1 | ||
| An entry in the mscAppnLcnDcOptionsTable. | |||
| OBJECT-TYPE | |||
| MscAppnLcnDcOptionsEntry | |||
| mscAppnLcnDcRemoteNpi | 1.3.6.1.4.1.562.36.2.1.110.4.2.10.1.3 | ||
| RemoteNumbering Plan Indicator (Npi) indicates the numbering plan used in the remoteDna. | |||
| OBJECT-TYPE | |||
| INTEGER | x121(0), e164(1) | ||
| mscAppnLcnDcRemoteDna | 1.3.6.1.4.1.562.36.2.1.110.4.2.10.1.4 | ||
| This attribute specifies the Data Network Address (Dna) of the remote. This is the called (destination) DTE address (Dna) to which this direct call will be sent. Initially, the called DTE address attribute must be present, that is, there must be a valid destination address. However, it may be possible in the future to configure the direct call with a mnemonic address, in which case, this attribute will contain a zero-length Dna, and the mnemonic address will be carried as one of the facilities. | |||
| OBJECT-TYPE | |||
| DigitString | SIZE(1..15) | ||
| mscAppnLcnDcTransferPriority | 1.3.6.1.4.1.562.36.2.1.110.4.2.10.1.9 | ||
| This attribute specifies the transfer priority to network for the outgoing calls using this particular LCN. It overRides the defaultTransferPriority provisioned in its associated Dna component. The transfer priority is a preference specified by an application according to its delay-sensitivity requirement. Frames with high transfer priority are served by the network before the frames with normal priority. Each transfer priority contains a predetermined setting for trunk queue (interrupting, delay or throughput), and routing metric (delay or throughput). When the transfer priority is set at high, the trunk queue is set to high, the routing metric is set to delay. When the transfer priority is set at normal, the trunk queue is set to normal, the routing metric is set to throughput. The default of transferPriority is useDnaDefTP. It means using the provisioning value under defaultTransferPriority of its associated Dna for this DLCI. | |||
| OBJECT-TYPE | |||
| INTEGER | normal(0), high(9), useDnaDefTP(255) | ||
| mscAppnLcnDcDiscardPriority | 1.3.6.1.4.1.562.36.2.1.110.4.2.10.1.10 | ||
| This attribute specifies the discard priority for outgoing call using this LCN. The discard priority has three provisioning values: normal, high, and useDnaDefPriority. Traffic with normal priority are discarded first than the traffic with high priority. The Dna default value (provisioned by outDefaultPriority) is taken if this attribute is set to the value useDnaDefPriority. The default of discardPriority is useDnaDefPriority. | |||
| OBJECT-TYPE | |||
| INTEGER | normal(0), high(1), useDnaDefPriority(3) | ||
| mscAppnLcnVc | 1.3.6.1.4.1.562.36.2.1.110.4.3 | ||
| OBJECT IDENTIFIER | |||
| mscAppnLcnVcRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.4.3.1 | ||
| This entry controls the addition and deletion of mscAppnLcnVc components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnLcnVcRowStatusEntry | |||
| mscAppnLcnVcRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.4.3.1.1 | ||
| A single entry in the table represents a single mscAppnLcnVc component. | |||
| OBJECT-TYPE | |||
| MscAppnLcnVcRowStatusEntry | |||
| mscAppnLcnVcRowStatus | 1.3.6.1.4.1.562.36.2.1.110.4.3.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnLcnVc components. These components cannot be added nor deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnLcnVcComponentName | 1.3.6.1.4.1.562.36.2.1.110.4.3.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnLcnVcStorageType | 1.3.6.1.4.1.562.36.2.1.110.4.3.1.1.4 | ||
| This variable represents the storage type value for the mscAppnLcnVc tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnLcnVcIndex | 1.3.6.1.4.1.562.36.2.1.110.4.3.1.1.10 | ||
| This variable represents the index for the mscAppnLcnVc tables. | |||
| OBJECT-TYPE | |||
| NonReplicated | |||
| mscAppnLcnVcCadTable | 1.3.6.1.4.1.562.36.2.1.110.4.3.10 | ||
| This group represents operational call data related to General Vc. It can be displayed only for General Vc which is created by application. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnLcnVcCadEntry | |||
| mscAppnLcnVcCadEntry | 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1 | ||
| An entry in the mscAppnLcnVcCadTable. | |||
| OBJECT-TYPE | |||
| MscAppnLcnVcCadEntry | |||
| mscAppnLcnVcType | 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.1 | ||
| This attribute displays the type of call, pvc or svc. type is provided at provisioning time. | |||
| OBJECT-TYPE | |||
| INTEGER | svc(0), pvc(1) | ||
| mscAppnLcnVcState | 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.2 | ||
| This attribute displays the state of call control. P5 state is not supported but is listed for completness. Transitions from one state to another take very short time. state most often displayed is dataTransferP4. | |||
| OBJECT-TYPE | |||
| INTEGER | creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8) | ||
| mscAppnLcnVcPreviousState | 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.3 | ||
| This attribute displays the previous state of call control. This is a valuable field to determine how the processing is progressing. | |||
| OBJECT-TYPE | |||
| INTEGER | creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8) | ||
| mscAppnLcnVcDiagnosticCode | 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.4 | ||
| This attribute displays the internal substate of call control. It is used to further refine state of call processing. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..255 | ||
| mscAppnLcnVcPreviousDiagnosticCode | 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.5 | ||
| This attribute displays the internal substate of call control. It is used to further refine state of call processing. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..255 | ||
| mscAppnLcnVcCalledNpi | 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.6 | ||
| This attribute displays the Numbering Plan Indicator (NPI) of the called end. | |||
| OBJECT-TYPE | |||
| INTEGER | x121(0), e164(1) | ||
| mscAppnLcnVcCalledDna | 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.7 | ||
| This attribute displays the Data Network Address (Dna) of the called (destination) DTE to which this call is sent. This address if defined at recieving end will complete Vc connection. | |||
| OBJECT-TYPE | |||
| DigitString | SIZE(1..15) | ||
| mscAppnLcnVcCalledLcn | 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.8 | ||
| This attribute displays the Logical Channel Number of the called end. It is valid only after both ends of Vc exchanged relevant information. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 1..65535 | ||
| mscAppnLcnVcCallingNpi | 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.9 | ||
| This attribute displays the Numbering Plan Indicator (NPI) of the calling end. | |||
| OBJECT-TYPE | |||
| INTEGER | x121(0), e164(1) | ||
| mscAppnLcnVcCallingDna | 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.10 | ||
| This attribute displays the Data Network Address (Dna) of the calling end. | |||
| OBJECT-TYPE | |||
| DigitString | SIZE(1..15) | ||
| mscAppnLcnVcCallingLcn | 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.11 | ||
| This attribute displays the Logical Channel Number of the calling end. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 1..65535 | ||
| mscAppnLcnVcAccountingEnabled | 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.12 | ||
| This attribute indicates that this optional section of accounting record is suppressed or permitted. If accountingEnabled is yes, conditions for generation of accounting record were met. These conditions include billing options, vc recovery conditions and Module wide accounting data options. | |||
| OBJECT-TYPE | |||
| INTEGER | yes(0), no(1) | ||
| mscAppnLcnVcFastSelectCall | 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.13 | ||
| This attribute displays that this is a fast select call. | |||
| OBJECT-TYPE | |||
| INTEGER | no(0), yes(1) | ||
| mscAppnLcnVcLocalRxPktSize | 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.14 | ||
| This attribute displays the locally negotiated size of send packets. | |||
| OBJECT-TYPE | |||
| INTEGER | unknown(0), n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12) | ||
| mscAppnLcnVcLocalTxPktSize | 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.15 | ||
| This attribute displays the locally negotiated size of send packets. | |||
| OBJECT-TYPE | |||
| INTEGER | unknown(0), n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12) | ||
| mscAppnLcnVcLocalTxWindowSize | 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.16 | ||
| This attribute displays the send window size provided on incoming call packets or the default when a call request packet does not explicitly provide the window size. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..127 | ||
| mscAppnLcnVcLocalRxWindowSize | 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.17 | ||
| This attribute displays the receive window size provided on incoming call packets or the default when a call request does not explicitly provide the window sizes. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..127 | ||
| mscAppnLcnVcPathReliability | 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.19 | ||
| This attribute displays the path reliability. | |||
| OBJECT-TYPE | |||
| INTEGER | high(0), normal(1) | ||
| mscAppnLcnVcAccountingEnd | 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.20 | ||
| This attribute indicates if this end should generate an accounting record. Normally, callingEnd is the end to generate an accounting record. | |||
| OBJECT-TYPE | |||
| INTEGER | callingEnd(0), calledEnd(1) | ||
| mscAppnLcnVcPriority | 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.21 | ||
| This attribute displays whether the call is a normal or a high priority call. | |||
| OBJECT-TYPE | |||
| INTEGER | normal(0), high(1) | ||
| mscAppnLcnVcSegmentSize | 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.22 | ||
| This attribute displays the segment size (in bytes) used on the call. It is used to calculate the number of segments transmitted and received. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..4096 | ||
| mscAppnLcnVcSubnetTxPktSize | 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.23 | ||
| This attribute displays the locally negotiated size of the data packets on this Vc. | |||
| OBJECT-TYPE | |||
| INTEGER | unknown(0), n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12) | ||
| mscAppnLcnVcSubnetTxWindowSize | 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.24 | ||
| This attribute displays the current send window size of Vc. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..4096 | ||
| mscAppnLcnVcSubnetRxPktSize | 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.25 | ||
| This attribute displays the locally negotiated size of receive packets. | |||
| OBJECT-TYPE | |||
| INTEGER | unknown(0), n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12) | ||
| mscAppnLcnVcSubnetRxWindowSize | 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.26 | ||
| This attribute displays the receive window size provided on incoming call packets and to the default when a call request does not explicitly provide the window sizes. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..4096 | ||
| mscAppnLcnVcMaxSubnetPktSize | 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.27 | ||
| This attribute displays the maximum packet size allowed on Vc. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..4096 | ||
| mscAppnLcnVcTransferPriorityToNetwork | 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.28 | ||
| This attribute displays the priority in which data is transferred to the network. The transfer priority is a preference specified by an application according to its delay-sensitivity requirement. Frames with high transfer priority are served by the network before the frames with normal priority. Each transfer priority contains a predetermined setting for trunk queue (interrupting, delay or throughput), and routing metric (delay or throughput). When the transfer priority is set at high, the trunk queue is set to high, the routing metric is set to delay. When the transfer priority is set at normal, the trunk queue is set to normal, the routing metric is set to throughput. | |||
| OBJECT-TYPE | |||
| INTEGER | normal(0), high(9) | ||
| mscAppnLcnVcTransferPriorityFromNetwork | 1.3.6.1.4.1.562.36.2.1.110.4.3.10.1.29 | ||
| This attribute displays the priority in which data is transferred from the network. The transfer priority is a preference specified by an application according to its delay-sensitivity requirement. Frames with high transfer priority are served by the network before the frames with normal priority. Each transfer priority contains a predetermined setting for trunk queue (interrupting, delay or throughput), and routing metric (delay or throughput). When the transfer priority is set at high, and the trunk queue is set to high, the routing metric is set to delay. When the transfer priority is set at normal, the trunk queue is set to normal, and the routing metric is set to throughput. | |||
| OBJECT-TYPE | |||
| INTEGER | normal(0), high(9) | ||
| mscAppnLcnVcIntdTable | 1.3.6.1.4.1.562.36.2.1.110.4.3.11 | ||
| This group defines display of interval data collected by Vc. Data in this group is variable and may depend on time when this display command is issued. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnLcnVcIntdEntry | |||
| mscAppnLcnVcIntdEntry | 1.3.6.1.4.1.562.36.2.1.110.4.3.11.1 | ||
| An entry in the mscAppnLcnVcIntdTable. | |||
| OBJECT-TYPE | |||
| MscAppnLcnVcIntdEntry | |||
| mscAppnLcnVcCallReferenceNumber | 1.3.6.1.4.1.562.36.2.1.110.4.3.11.1.1 | ||
| This attribute displays the call reference number which is a unique number generated by the switch.The same Call Reference Number is stored in the interval data (accounting record) at both ends of the call. It can be used as one of the attributes in matching duplicate records generated at each end of the call. | |||
| OBJECT-TYPE | |||
| Hex | 0..16777215 | ||
| mscAppnLcnVcElapsedTimeTillNow | 1.3.6.1.4.1.562.36.2.1.110.4.3.11.1.2 | ||
| This attribute displays the elapsed time representing the period of this interval data. It is elapsed time in 0.1 second increments since Vc started. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..16777215 | ||
| mscAppnLcnVcSegmentsRx | 1.3.6.1.4.1.562.36.2.1.110.4.3.11.1.3 | ||
| This attribute displays the number of segments received at the time command was issued. This is the segment received count maintained by accounting at each end of the Vc. This counter is updated only when the packet cannot be successfully delivered out of the sink Vc and to the sink AP Conditions in which packets may be discarded by the sink Vc include: missing packets due to subnet discards, segmentation protocol violations due to subnet discard, duplicated and out-of-ranged packets and packets that arrive while Vc is in path recovery state. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..16777215 | ||
| mscAppnLcnVcSegmentsSent | 1.3.6.1.4.1.562.36.2.1.110.4.3.11.1.4 | ||
| This attribute displays the number of segments sent at the time command was issued. This is the segment sent count maintained by accounting at the source Vc. Vc only counts packets that Vc thinks can be delivered successfully into the subnet. In reality, these packets may be dropped by trunking, for instance. This counter is not updated when splitting fails, when Vc is in a path recovery state, when packet forwarding fails to forward this packet and when subsequent packets have to be discarded as we want to minimize the chance of out-of-sequence and do not intentionally send out-of- sequenced packets into the subnet. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..16777215 | ||
| mscAppnLcnVcStartTime | 1.3.6.1.4.1.562.36.2.1.110.4.3.11.1.5 | ||
| This attribute displays the start time of this interval period. If Vc spans 12 hour time or time of day change startTime reflects new time as recorded at 12 hour periods or time of day changes. | |||
| OBJECT-TYPE | |||
| EnterpriseDateAndTime | SIZE(0 | 19) | ||
| mscAppnLcnVcStatsTable | 1.3.6.1.4.1.562.36.2.1.110.4.3.12 | ||
| ... Statistics(Stats) This group defines general attributes collected by general Vc. The purpose of Vc attributes is to aid end users and verification people to understand the Vc internal behavior. This is particularly useful when the network has experienced abnormality and we want to isolate problems and pinpoint trouble spots. Attributes are collected on a per Vc basis. Until a need is identified, statistics are not collected at a processor level. Each attribute is stored in a 32 bit field and is initialized to zero when a Vc enters into the data transfer state. When a PVC is disconnected and then connected again, the attributes will be reset. Attributes cannot be reset through other methods. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnLcnVcStatsEntry | |||
| mscAppnLcnVcStatsEntry | 1.3.6.1.4.1.562.36.2.1.110.4.3.12.1 | ||
| An entry in the mscAppnLcnVcStatsTable. | |||
| OBJECT-TYPE | |||
| MscAppnLcnVcStatsEntry | |||
| mscAppnLcnVcAckStackingTimeouts | 1.3.6.1.4.1.562.36.2.1.110.4.3.12.1.1 | ||
| This attribute counts the number of ack stacking timer expiries. It is used as an indicator of the acknowledgment behavior across the subnet when ack stacking is in effect. If it expires often, usually this means end users will experience longer delay. The ack stacking timer specifies how long the Vc will wait before finally sending the subnet acknowledgment. if this attribute is set to a value of 0, then the Vc will automatically return acknowledgment packets without delay. If this attribute is set to a value other than zero, then the Vc will wait for this amount of time in an attempt to piggyback the acknowledgment packet on another credit or data packet. If the Vc cannot piggyback the acknowledgment packet within this time, then the packet is returned without piggybacking. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..5000 | ||
| mscAppnLcnVcOutOfRangeFrmFromSubnet | 1.3.6.1.4.1.562.36.2.1.110.4.3.12.1.2 | ||
| This attribute counts the number of subnet frames discarded due to the sequence number being out of range. Two Categories apply for the General Vc 1) lost Acks (previous Range) 2) unexpected Packets (next Range) Vc internally maintains its own sequence number of packet order and sequencing. Due to packet retransmission, Vc may receive duplicate packets that have the same Vc internal sequence number. Only 1 copy is accepted by the Vc and other copies of the same packets are detected through this count. This attribute can be used to record the frequency of packet retransmission due to Vc and other part of the subnet. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..5000 | ||
| mscAppnLcnVcDuplicatesFromSubnet | 1.3.6.1.4.1.562.36.2.1.110.4.3.12.1.3 | ||
| This attribute counts the number of subnet packets discarded due to duplication. It is used to detect software error fault or duplication caused by retransmitting. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..5000 | ||
| mscAppnLcnVcFrmRetryTimeouts | 1.3.6.1.4.1.562.36.2.1.110.4.3.12.1.4 | ||
| This attribute counts the number of frames which have retransmission time-out. If packets from Vc into the subnet are discarded by the subnet, the source Vc will not receive any acknowledgment. The retransmission timer then expires and packets will be retransmitted again. Note that the Vc idle probe may be retransmitted and is included in this count. This statistics does not show the distribution of how many times packets are retransmitted (e.g. first retransmission results in successful packet forwarding). | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..5000 | ||
| mscAppnLcnVcPeakRetryQueueSize | 1.3.6.1.4.1.562.36.2.1.110.4.3.12.1.5 | ||
| This attribute indicates the peak size of the retransmission queue. This attribute is used as an indicator of the acknowledgment behavior across the subnet. It records the largest body of unacknowledged packets. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..5000 | ||
| mscAppnLcnVcPeakOoSeqQueueSize | 1.3.6.1.4.1.562.36.2.1.110.4.3.12.1.6 | ||
| This attribute indicates the peak size of the out of sequence queue. This attribute is used as an indicator of the sequencing behavior across the subnet. It records the largest body of out of sequence packets. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..5000 | ||
| mscAppnLcnVcPeakOoSeqFrmForwarded | 1.3.6.1.4.1.562.36.2.1.110.4.3.12.1.7 | ||
| This attribute indicates the peak size of the sequence packet queue. This attribute is used as an indicator of the sequencing behavior across the subnet. It records the largest body of out of sequence packets, which by the receipt of an expected packet have been transformed to expected packets. The number of times this peak is reached is not recorded as it is traffic dependent. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..5000 | ||
| mscAppnLcnVcPeakStackedAcksRx | 1.3.6.1.4.1.562.36.2.1.110.4.3.12.1.8 | ||
| This attribute indicates the peak size of wait acks. This attribute is used as an indicator of the acknowledgment behavior across the subnet. It records the largest collective acknowledgment. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..5000 | ||
| mscAppnLcnVcSubnetRecoveries | 1.3.6.1.4.1.562.36.2.1.110.4.3.12.1.9 | ||
| This attribute counts the number of successful Vc recovery attempts. This attribute is used as an indicator of how many times the Vc path is broken but can be recovered. This attribute is useful to record the number of network path failures. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..5000 | ||
| mscAppnLcnVcWindowClosuresToSubnet | 1.3.6.1.4.1.562.36.2.1.110.4.3.12.1.10 | ||
| This attribute counts the number of window closures to subnet. A packet may have been sent into the subnet but its acknowledgment from the remote Vc has not yet been received. This is a 8 bit sequence number.This number is useful in detecting whether the Vc is sending any packet into the subnet. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..5000 | ||
| mscAppnLcnVcWindowClosuresFromSubnet | 1.3.6.1.4.1.562.36.2.1.110.4.3.12.1.11 | ||
| This attribute counts the number of window closures from subnet. This attribute is useful in detecting whether the Vc is receiving any packet from the subnet. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..5000 | ||
| mscAppnLcnVcWrTriggers | 1.3.6.1.4.1.562.36.2.1.110.4.3.12.1.12 | ||
| This attribute displays the number of times the Vc stays within the W-R region. The W-R region is a value used to determined the timing of credit transmission. Should the current window size be beneath this value, the credits will be transmitted immediately. Otherwise, they will be transmitted later with actual data. The wrTriggers statistic is therefore used to analyze the flow control and credit mechanism. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..5000 | ||
| mscAppnLcnStateTable | 1.3.6.1.4.1.562.36.2.1.110.4.10 | ||
| This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnLcnStateEntry | |||
| mscAppnLcnStateEntry | 1.3.6.1.4.1.562.36.2.1.110.4.10.1 | ||
| An entry in the mscAppnLcnStateTable. | |||
| OBJECT-TYPE | |||
| MscAppnLcnStateEntry | |||
| mscAppnLcnAdminState | 1.3.6.1.4.1.562.36.2.1.110.4.10.1.1 | ||
| This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. | |||
| OBJECT-TYPE | |||
| INTEGER | locked(0), unlocked(1), shuttingDown(2) | ||
| mscAppnLcnOperationalState | 1.3.6.1.4.1.562.36.2.1.110.4.10.1.2 | ||
| This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(0), enabled(1) | ||
| mscAppnLcnUsageState | 1.3.6.1.4.1.562.36.2.1.110.4.10.1.3 | ||
| This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. | |||
| OBJECT-TYPE | |||
| INTEGER | idle(0), active(1), busy(2) | ||
| mscAppnPort | 1.3.6.1.4.1.562.36.2.1.110.5 | ||
| OBJECT IDENTIFIER | |||
| mscAppnPortRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.5.1 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscAppnPort components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnPortRowStatusEntry | |||
| mscAppnPortRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.5.1.1 | ||
| A single entry in the table represents a single mscAppnPort component. | |||
| OBJECT-TYPE | |||
| MscAppnPortRowStatusEntry | |||
| mscAppnPortRowStatus | 1.3.6.1.4.1.562.36.2.1.110.5.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnPort components. These components cannot be added nor deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnPortComponentName | 1.3.6.1.4.1.562.36.2.1.110.5.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnPortStorageType | 1.3.6.1.4.1.562.36.2.1.110.5.1.1.4 | ||
| This variable represents the storage type value for the mscAppnPort tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnPortIndex | 1.3.6.1.4.1.562.36.2.1.110.5.1.1.10 | ||
| This variable represents the index for the mscAppnPort tables. | |||
| OBJECT-TYPE | |||
| AsciiStringIndex | SIZE(1..8) | ||
| mscAppnPortConfigTable | 1.3.6.1.4.1.562.36.2.1.110.5.10 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Learned attributes of a SNA Port. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnPortConfigEntry | |||
| mscAppnPortConfigEntry | 1.3.6.1.4.1.562.36.2.1.110.5.10.1 | ||
| An entry in the mscAppnPortConfigTable. | |||
| OBJECT-TYPE | |||
| MscAppnPortConfigEntry | |||
| mscAppnPortType | 1.3.6.1.4.1.562.36.2.1.110.5.10.1.1 | ||
| This attribute specifies the type of line used by the port. The possible values are: nonSwitched - switched - sharedAccessFacilities - | |||
| OBJECT-TYPE | |||
| INTEGER | nonSwitched(1), switched(2), sharedAccessFacilities(3) | ||
| mscAppnPortMaxRxBtuSize | 1.3.6.1.4.1.562.36.2.1.110.5.10.1.2 | ||
| This is the maximum basic transmission unit (BTU) size that can be received. The BTU is the unit of data and control information passed between path control components. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| mscAppnPortMaxTxBtuSize | 1.3.6.1.4.1.562.36.2.1.110.5.10.1.3 | ||
| This is the maximum basic transmission unit (BTU) size that can be sent. The BTU is the unit of data and control information passed between path control components. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| mscAppnPortTotLinkActLim | 1.3.6.1.4.1.562.36.2.1.110.5.10.1.4 | ||
| This is the total link activation limit. This is the maximum number of active adjacent link stations the port will support. This value limits the number of adjacent link stations that can be concurrently connected to the local node through this port. The limit includes adjacent link stations connected by both inbound and outbound link activations. The distinction of inbound or outbound for link activations is used to indicate which node initiated the connection. For inbound link activations, the adjacent link station initiates the connection with the local link station. For outbound link activations, the local node initiates the connection with the adjacent link station. totLinkActLim must be greater than either inbLinkActLim or outLinkActLim, but it should not greater than the sum of inbLinkActLim and outLinkActLim. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..99 | ||
| mscAppnPortInbLinkActLim | 1.3.6.1.4.1.562.36.2.1.110.5.10.1.5 | ||
| This is the inbound link activation limit. This is the maximum number of link stations which can be simultaneously active as a result of connection initiations from adjacent nodes. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..99 | ||
| mscAppnPortOutLinkActLim | 1.3.6.1.4.1.562.36.2.1.110.5.10.1.6 | ||
| This is the outbound link activation limit. This is the maximum number of link stations which can be simultaneously active as a result of connection initiations by the local node. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..99 | ||
| mscAppnPortLsRole | 1.3.6.1.4.1.562.36.2.1.110.5.10.1.7 | ||
| This is the initial role of the port's local link station when communicating with an adjacent link station. The possible options are negotiable, primary and secondary. | |||
| OBJECT-TYPE | |||
| INTEGER | primary(1), secondary(2), negotiable(3) | ||
| mscAppnPortActXidExchLim | 1.3.6.1.4.1.562.36.2.1.110.5.10.1.8 | ||
| This is the exchange limit for activation XIDs. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| mscAppnPortNonactXidExchLim | 1.3.6.1.4.1.562.36.2.1.110.5.10.1.9 | ||
| This is the exchange limit for non-activation XIDs. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| mscAppnPortLsXmitRxCap | 1.3.6.1.4.1.562.36.2.1.110.5.10.1.10 | ||
| This is Link Station transmit/receive capability. This is either tws (two-way simultaneous (full-duplex)) or twa (two-way alternate (half-duplex)). | |||
| OBJECT-TYPE | |||
| INTEGER | twa(0), tws(1) | ||
| mscAppnPortMaxIfrmRxWindow | 1.3.6.1.4.1.562.36.2.1.110.5.10.1.11 | ||
| This is the maximum number of I-frames that can be received by the local link stations before an acknowledgment is sent. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 1..127 | ||
| mscAppnPortTargetPacingCount | 1.3.6.1.4.1.562.36.2.1.110.5.10.1.12 | ||
| This is the desired pacing window size for BINDs on this transmission group. The number is significant only when fixed BIND pacing is being performed. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| mscAppnPortOperTable | 1.3.6.1.4.1.562.36.2.1.110.5.11 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Operational attributes of a SNA Port. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnPortOperEntry | |||
| mscAppnPortOperEntry | 1.3.6.1.4.1.562.36.2.1.110.5.11.1 | ||
| An entry in the mscAppnPortOperTable. | |||
| OBJECT-TYPE | |||
| MscAppnPortOperEntry | |||
| mscAppnPortState | 1.3.6.1.4.1.562.36.2.1.110.5.11.1.1 | ||
| The attribute represents the current operational state of the port. The value can be any of the following: inactive - pendingActive - active - pendingInactive - | |||
| OBJECT-TYPE | |||
| INTEGER | inactive(1), pendingActive(2), active(3), pendingInactive(4) | ||
| mscAppnPortDlcType | 1.3.6.1.4.1.562.36.2.1.110.5.11.1.2 | ||
| Type of the DLC interface used by this port. Possible values are: sdlc - synchronous data link control x25 - QLLC logical link control tokenRing - IEEE 802.2 logical link control frameRelay - RFC1490 and IEEE 802.2 logical link control other - dlc type other than those listed above. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), sdlc(2), tokenRing(6), frameRelay(30), x25(31) | ||
| mscAppnPortSimRim | 1.3.6.1.4.1.562.36.2.1.110.5.11.1.3 | ||
| This attribute indicates whether Set Initialization Mode (SIM) and Receive Initialization Mode (RIM) are supported. | |||
| OBJECT-TYPE | |||
| INTEGER | yes(1), no(2) | ||
| mscAppnPortDefinedLsGoodXids | 1.3.6.1.4.1.562.36.2.1.110.5.11.1.4 | ||
| This is the total number of successful XIDs that have been received on all of the defined link stations on this port since the last time this port was started. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnPortDefinedLsBadXids | 1.3.6.1.4.1.562.36.2.1.110.5.11.1.5 | ||
| This attributes contains the total number of unsuccessful XIDs that have been received on all of the defined link stations on this port since the last time this port was started. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnPortDynLsGoodXids | 1.3.6.1.4.1.562.36.2.1.110.5.11.1.6 | ||
| This is the total number of successful XIDs that have been received on all of the dynamic link stations on this port since the last time this port was started. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnPortDynLsBadXids | 1.3.6.1.4.1.562.36.2.1.110.5.11.1.7 | ||
| This is the total number of unsuccessful XIDs that have been received on all of the dynamic link stations on this port since the last time this port was started. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnPortTgCharTable | 1.3.6.1.4.1.562.36.2.1.110.5.12 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** These attributes of the link station are in a group using a common structure. This set provides the TG characteristics of the link through this link station for route selection. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnPortTgCharEntry | |||
| mscAppnPortTgCharEntry | 1.3.6.1.4.1.562.36.2.1.110.5.12.1 | ||
| An entry in the mscAppnPortTgCharTable. | |||
| OBJECT-TYPE | |||
| MscAppnPortTgCharEntry | |||
| mscAppnPortEffectiveCap | 1.3.6.1.4.1.562.36.2.1.110.5.12.1.1 | ||
| The effective capacity is an integer value that indicates the capacity in kilo bits per second. It is derived from the link bandwidth and the maximum load factor with the range of 0 thru 603,979,776. | |||
| OBJECT-TYPE | |||
| INTEGER | min(0), n170bps(1), n190bps(2), n210bps(3), n230bps(4), n240bps(5), n260bps(6), n280bps(7), n300bps(8), n340bps(9), n380bps(10), n410bps(11), n450bps(12), n490bps(13), n530bps(14), n560bps(15), n600bps(16), n680bps(17), n750bps(18), n830bps(19), n900bps(20), n980bps(21), n1050bps(22), n1130bps(23), n1200bps(24), n1350bps(25), n1500bps(26), n1700bps(27), n1800bps(28), n2000bps(29), n2100bps(30), n2300bps(31), n2400bps(32), n2700bps(33), n3000bps(34), n3300bps(35), n3600bps(36), n3900bps(37), n4200bps(38), n4500bps(39), n4800bps(40), n5400bps(41), n6000bps(42), n6600bps(43), n7200bps(44), n7800bps(45), n8400bps(46), n9000bps(47), n9600bps(48), n10800bps(49), n12000bps(50), n13200bps(51), n14400bps(52), n15600bps(53), n17kbps(54), n18kbps(55), n19kbps(56), n22kbps(57), n24kbps(58), n26kbps(59), n29kbps(60), n31kbps(61), n34kbps(62), n36kbps(63), n38kbps(64), n43kbps(65), n48kbps(66), n53kbps(67), n58kbps(68), n62kbps(69), n67kbps(70), n72kbps(71), n77kbps(72), n86kbps(73), n96kbps(74), n106kbps(75), n115kbps(76), n125kbps(77), n134kbps(78), n144kbps(79), n154kbps(80), n170kbps(81), n190kbps(82), n210kbps(83), n230kbps(84), n250kbps(85), n270kbps(86), n290kbps(87), n310kbps(88), n350kbps(89), n380kbps(90), n420kbps(91), n460kbps(92), n500kbps(93), n540kbps(94), n580kbps(95), n610kbps(96), n690kbps(97), n770kbps(98), n840kbps(99), n920kbps(100), n1000kbps(101), n1080kbps(102), n1150kbps(103), n1230kbps(104), n1380kbps(105), n1540kbps(106), n1700kbps(107), n1800kbps(108), n2000kbps(109), n2200kbps(110), n2300kbps(111), n2500kbps(112), n2800kbps(113), n3100kbps(114), n3400kbps(115), n3700kbps(116), n4000kbps(117), n4300kbps(118), n4600kbps(119), n4900kbps(120), n5500kbps(121), n6100kbps(122), n6800kbps(123), n7400kbps(124), n8000kbps(125), n8600kbps(126), n9200kbps(127), n9800kbps(128), n11100kbps(129), n12300kbps(130), n13500kbps(131), n14700kbps(132), n16Mbps(133), n17Mbps(134), n18Mbps(135), n20Mbps(136), n22Mbps(137), n25Mbps(138), n27Mbps(139), n29Mbps(140), n32Mbps(141), n34Mbps(142), n37Mbps(143), n39Mbps(144), n44Mbps(145), n49Mbps(146), n54Mbps(147), n59Mbps(148), n64Mbps(149), n69Mbps(150), n74Mbps(151), n79Mbps(152), n88Mbps(153), n98Mbps(154), n108Mbps(155), n118Mbps(156), n128Mbps(157), n138Mbps(158), n147Mbps(159), n157Mbps(160), n180Mbps(161), n200Mbps(162), n220Mbps(163), n240Mbps(164), n260Mbps(165), n280Mbps(166), n290Mbps(167), n310Mbps(168), n350Mbps(169), n390Mbps(170), n430Mbps(171), n470Mbps(172), n510Mbps(173), n550Mbps(174), n590Mbps(175), n630Mbps(176), n710Mbps(177), n790Mbps(178), n870Mbps(179), n940Mbps(180), n1020Mbps(181), n1100Mbps(182), n1180Mbps(183), n1260Mbps(184), n1420Mbps(185), n1570Mbps(186), n1700Mbps(187), n1900Mbps(188), n2000Mbps(189), n2200Mbps(190), n2400Mbps(191), n2500Mbps(192), n2800Mbps(193), n3100Mbps(194), n3500Mbps(195), n3800Mbps(196), n4100Mbps(197), n4400Mbps(198), n4700Mbps(199), n5000Mbps(200), n5700Mbps(201), n6300Mbps(202), n6900Mbps(203), n7500Mbps(204), n8200Mbps(205), n8800Mbps(206), n9400Mbps(207), n10100Mbps(208), n11300Mbps(209), n12600Mbps(210), n13800Mbps(211), n15100Mbps(212), n16Gbps(213), n18Gbps(214), n19Gbps(215), n20Gbps(216), n23Gbps(217), n25Gbps(218), n28Gbps(219), n30Gbps(220), n33Gbps(221), n35Gbps(222), n38Gbps(223), n40Gbps(224), n45Gbps(225), n50Gbps(226), n55Gbps(227), n60Gbps(228), n65Gbps(229), n70Gbps(230), n75Gbps(231), n81Gbps(232), n91Gbps(233), n101Gbps(234), n111Gbps(235), n121Gbps(236), n131Gbps(237), n141Gbps(238), n151Gbps(239), n160Gbps(240), n180Gbps(241), n200Gbps(242), n220Gbps(243), n240Gbps(244), n260Gbps(245), n280Gbps(246), n300Gbps(247), n320Gbps(248), n360Gbps(249), n400Gbps(250), n440Gbps(251), n480Gbps(252), n520Gbps(253), n560Gbps(254), n600Gbps(255) | ||
| mscAppnPortConnectCost | 1.3.6.1.4.1.562.36.2.1.110.5.12.1.2 | ||
| The cost-per-connect time is a characteristic represented by a single-byte value in the range 0 to 255 that expresses a relative cost of using a transmission group. The units for cost-per-connect time are installation-defined and are typically based on the applicable tariffs of the transmission facility being used by the transmission group. The cost-per-connect time values that a network administrator assigns to the transmission groups in a network should reflect the relative expense of each transmission group as compared to all other transmission groups in the network. A value of 0 means that the cost of connecting over the transmission group is at no additional cost (as in the case of a non-switched facility. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| mscAppnPortByteCost | 1.3.6.1.4.1.562.36.2.1.110.5.12.1.3 | ||
| Cost-per-byte is a single byte value in the range 0 to 255 that expresses a relative cost of transmitting a byte over the associated transmission group. The units for cost-per-byte are user-defined. Like cost-per-connect-time, cost-per-byte is network specific and will not be uniform across networks unless assignments are coordinated. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| mscAppnPortSecurity | 1.3.6.1.4.1.562.36.2.1.110.5.12.1.4 | ||
| This static characteristic indicates the level of security protection. The security values are architecturally defined to provide continuity across all networks. Currently, security is encoded as one of the following seven values: guardedRadiation - guarded conduit containing the transmission medium; protected against physical and radiation tapping. encrypted - link level encryption is provided unknown - has not been determined guardedConduit - guarded conduit; protected against physical tapping secureConduit - secure conduit, not guarded; e.g. pressurized pipe undergroundCable - underground cable located in a secure country publicSwitchedNetwork - public switched network; secure in the sense that there is no predetermined route that traffic will take nonSecure - all else, e.g. satellite-connected, located in a nonsecure country. | |||
| OBJECT-TYPE | |||
| INTEGER | unKnown(0), nonSecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192) | ||
| mscAppnPortPropagationDelay | 1.3.6.1.4.1.562.36.2.1.110.5.12.1.5 | ||
| The propagation delay is the length of time that it takes for a signal to propagate from one end of the transmission group to the other. Typical values are: minimum - minimum negligible - 400 microsec terrestrial - 10 msec packetSwitched - 150 msec long - 300 msec | |||
| OBJECT-TYPE | |||
| INTEGER | minimum(0), negligible(76), terrestrial(113), packetSwitched(145), long(153) | ||
| mscAppnPortUserDefinedParm1 | 1.3.6.1.4.1.562.36.2.1.110.5.12.1.7 | ||
| This is the user defined routing parameter in range 0-255. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..255 | ||
| mscAppnPortUserDefinedParm2 | 1.3.6.1.4.1.562.36.2.1.110.5.12.1.8 | ||
| This is the user defined routing parameter in range 0-255. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..255 | ||
| mscAppnPortUserDefinedParm3 | 1.3.6.1.4.1.562.36.2.1.110.5.12.1.9 | ||
| This is the user defined routing parameter in range 0-255. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..255 | ||
| mscAppnLs | 1.3.6.1.4.1.562.36.2.1.110.6 | ||
| OBJECT IDENTIFIER | |||
| mscAppnLsRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.6.1 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscAppnLs components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnLsRowStatusEntry | |||
| mscAppnLsRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.6.1.1 | ||
| A single entry in the table represents a single mscAppnLs component. | |||
| OBJECT-TYPE | |||
| MscAppnLsRowStatusEntry | |||
| mscAppnLsRowStatus | 1.3.6.1.4.1.562.36.2.1.110.6.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnLs components. These components cannot be added nor deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnLsComponentName | 1.3.6.1.4.1.562.36.2.1.110.6.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnLsStorageType | 1.3.6.1.4.1.562.36.2.1.110.6.1.1.4 | ||
| This variable represents the storage type value for the mscAppnLs tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnLsIndex | 1.3.6.1.4.1.562.36.2.1.110.6.1.1.10 | ||
| This variable represents the index for the mscAppnLs tables. | |||
| OBJECT-TYPE | |||
| AsciiStringIndex | SIZE(1..8) | ||
| mscAppnLsLsVcReferenceTable | 1.3.6.1.4.1.562.36.2.1.110.6.10 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This identifies which physical interface is associated with this link station. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnLsLsVcReferenceEntry | |||
| mscAppnLsLsVcReferenceEntry | 1.3.6.1.4.1.562.36.2.1.110.6.10.1 | ||
| An entry in the mscAppnLsLsVcReferenceTable. | |||
| OBJECT-TYPE | |||
| MscAppnLsLsVcReferenceEntry | |||
| mscAppnLsName | 1.3.6.1.4.1.562.36.2.1.110.6.10.1.1 | ||
| This string identifies which physical interface the link station is associated with. | |||
| OBJECT-TYPE | |||
| RowPointer | |||
| mscAppnLsSap | 1.3.6.1.4.1.562.36.2.1.110.6.10.1.2 | ||
| This attribute indicates the SAP number of the device assigned to this link station. This field is only valid for dlcType of llc2. If the dlcType is not llc2, this field will be 0. | |||
| OBJECT-TYPE | |||
| Hex | 0..252 | ||
| mscAppnLsConfigTable | 1.3.6.1.4.1.562.36.2.1.110.6.11 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the attributes that define the behavior of a SNA link station. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnLsConfigEntry | |||
| mscAppnLsConfigEntry | 1.3.6.1.4.1.562.36.2.1.110.6.11.1 | ||
| An entry in the mscAppnLsConfigTable. | |||
| OBJECT-TYPE | |||
| MscAppnLsConfigEntry | |||
| mscAppnLsPortName | 1.3.6.1.4.1.562.36.2.1.110.6.11.1.1 | ||
| This attribute contains the name of the port associated with this link station. | |||
| OBJECT-TYPE | |||
| AsciiString | SIZE(1..8) | ||
| mscAppnLsFeatures | 1.3.6.1.4.1.562.36.2.1.110.6.11.1.4 | ||
| Various optional features of a link station. autoActSupp If present specifies that the link can be activated automatically when required by a session. A link cannot be automatically activated from an independent LU session unless it has been started previously. The link cannot be defined to support CP-CP sessions and to be auto-activatable because this might cause inconsistent network behavior. limitedResource If present, specifies that this link station is to be deactivated when there are no sessions using the link. Note that link stations on a non- switched port cannot be configured as limited resource. backLvlLenEn If present, specifies that this link is to a back level LEN End Node. cpCpSessSupport If present, specifies that CP-CP sessions are supported by this link station. Description of bits: autoActSupp(0) limitedResource(1) backLvlLenEn(2) cpCpSessSupport(3) | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1) | ||
| mscAppnLsMaxTxBtuSize | 1.3.6.1.4.1.562.36.2.1.110.6.11.1.6 | ||
| This is the maximum basic transmission unit (BTU) size that can be sent. The BTU is the unit of data and control information passed between path control components. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..32767 | ||
| mscAppnLsOperTable | 1.3.6.1.4.1.562.36.2.1.110.6.12 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Operational data of the link station. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnLsOperEntry | |||
| mscAppnLsOperEntry | 1.3.6.1.4.1.562.36.2.1.110.6.12.1 | ||
| An entry in the mscAppnLsOperTable. | |||
| OBJECT-TYPE | |||
| MscAppnLsOperEntry | |||
| mscAppnLsDlcType | 1.3.6.1.4.1.562.36.2.1.110.6.12.1.1 | ||
| This attribute indicates the type of data link control that this LS is associated. Possible types are: sdlc - synchronous data link control x25 - QLLC logical link control tokenRing - IEEE 802.2 logical link control llc2 - RFC1490 and IEEE 802.2 logical link control. other - dlc type other than those listed above. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), sdlc(2), tokenRing(6), llc2(30), x25(31) | ||
| mscAppnLsLinkStationState | 1.3.6.1.4.1.562.36.2.1.110.6.12.1.2 | ||
| This the current state of the link station. The possible values are: inactive - active - pendingActive - pendingInactive - | |||
| OBJECT-TYPE | |||
| INTEGER | inactive(1), pendingActive(2), active(3), pendingInactive(4) | ||
| mscAppnLsLinkStationSubState | 1.3.6.1.4.1.562.36.2.1.110.6.12.1.3 | ||
| This is the current sub-state of the link station. The possible values are: inactive, sentReqOpnstn, pendXidExch, sentActAs, sendSetMode, active, sentDeactAsOrd, sentDiscOrd, sentDestroyTg, sentCreateTg, sentConnReq,pendRcvConnInd, pendSendConnRsp, sentConnRsp, pendDeact. These are described in the APPN Architecture reference | |||
| OBJECT-TYPE | |||
| INTEGER | inactive(1), sentReqOpnstn(2), pendXidExch(3), sentActAs(4), sentSentMode(5), active(6), sentDeactAsOrd(7), sentDiscOrd(8), sentDestroyTg(9), sentCreateTg(10), sentConnReq(11), pendRcvConnInd(12), pendSendConnRsp(13), sentConnRsp(14), pendDeact(15) | ||
| mscAppnLsActSessCount | 1.3.6.1.4.1.562.36.2.1.110.6.12.1.4 | ||
| This is the total number of active sessions (both endpoint and intermediate) using this link. | |||
| OBJECT-TYPE | |||
| Gauge32 | 0..65535 | ||
| mscAppnLsActualCpName | 1.3.6.1.4.1.562.36.2.1.110.6.12.1.5 | ||
| This is the actual network qualified adjacent control point (CP) name as determined from the XID 3 exchange. | |||
| OBJECT-TYPE | |||
| AsciiString | SIZE(3..17) | ||
| mscAppnLsActualCpType | 1.3.6.1.4.1.562.36.2.1.110.6.12.1.6 | ||
| This is the actual type of adjacent node type as determined during contact negotiation. The possible types are: endNode lowEntryNode networkNode toBeDetermine | |||
| OBJECT-TYPE | |||
| INTEGER | toBeDetermined(0), networkNode(1), endNode(2), lowEntryNode(4) | ||
| mscAppnLsDlcName | 1.3.6.1.4.1.562.36.2.1.110.6.12.1.7 | ||
| This is the name of the port group associated with the port through which this link station is attached. | |||
| OBJECT-TYPE | |||
| AsciiString | SIZE(1..8) | ||
| mscAppnLsDynamicOrDefined | 1.3.6.1.4.1.562.36.2.1.110.6.12.1.8 | ||
| This attribute reflects whether the link was created explicitly or dynamically (either in response to a connection request from the adjacent node, or to connect dynamically to another node across a connection network). The possible values are dynamic or defined. | |||
| OBJECT-TYPE | |||
| INTEGER | dynamic(1), defined(2) | ||
| mscAppnLsMigration | 1.3.6.1.4.1.562.36.2.1.110.6.12.1.9 | ||
| This attribute specifies whether the adjacent node is a migration level node, such as a low entry networking or LEN node. | |||
| OBJECT-TYPE | |||
| INTEGER | yes(1), no(2), unknown(3) | ||
| mscAppnLsTgNum | 1.3.6.1.4.1.562.36.2.1.110.6.12.1.10 | ||
| This is the number associated with the transmission group using this link station. It can be used to distinguish it from other transmission groups to the same adjacent node. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..255 | ||
| mscAppnLsHprSupport | 1.3.6.1.4.1.562.36.2.1.110.6.12.1.11 | ||
| This is the type of High Performance Routing (HPR) being used on this link station. It is one of anr, rtp or none. The value in this attribute are bounded by the values provisioned on this node and the attached node. | |||
| OBJECT-TYPE | |||
| INTEGER | none(0), anr(1), rtp(2) | ||
| mscAppnLsAnrLabel | 1.3.6.1.4.1.562.36.2.1.110.6.12.1.12 | ||
| This is the HPR ANR label associated with this link station. | |||
| OBJECT-TYPE | |||
| Hex | 0..65535 | ||
| mscAppnLsTgCharTable | 1.3.6.1.4.1.562.36.2.1.110.6.13 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** These attributes of the link station are in a group using a common structure. This set provides the TG characteristics of the link through this link station for route selection. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnLsTgCharEntry | |||
| mscAppnLsTgCharEntry | 1.3.6.1.4.1.562.36.2.1.110.6.13.1 | ||
| An entry in the mscAppnLsTgCharTable. | |||
| OBJECT-TYPE | |||
| MscAppnLsTgCharEntry | |||
| mscAppnLsEffectiveCap | 1.3.6.1.4.1.562.36.2.1.110.6.13.1.1 | ||
| The effective capacity is an integer value that indicates the capacity in kilo bits per second. It is derived from the link bandwidth and the maximum load factor with the range of 0 thru 603,979,776. | |||
| OBJECT-TYPE | |||
| INTEGER | min(0), n170bps(1), n190bps(2), n210bps(3), n230bps(4), n240bps(5), n260bps(6), n280bps(7), n300bps(8), n340bps(9), n380bps(10), n410bps(11), n450bps(12), n490bps(13), n530bps(14), n560bps(15), n600bps(16), n680bps(17), n750bps(18), n830bps(19), n900bps(20), n980bps(21), n1050bps(22), n1130bps(23), n1200bps(24), n1350bps(25), n1500bps(26), n1700bps(27), n1800bps(28), n2000bps(29), n2100bps(30), n2300bps(31), n2400bps(32), n2700bps(33), n3000bps(34), n3300bps(35), n3600bps(36), n3900bps(37), n4200bps(38), n4500bps(39), n4800bps(40), n5400bps(41), n6000bps(42), n6600bps(43), n7200bps(44), n7800bps(45), n8400bps(46), n9000bps(47), n9600bps(48), n10800bps(49), n12000bps(50), n13200bps(51), n14400bps(52), n15600bps(53), n17kbps(54), n18kbps(55), n19kbps(56), n22kbps(57), n24kbps(58), n26kbps(59), n29kbps(60), n31kbps(61), n34kbps(62), n36kbps(63), n38kbps(64), n43kbps(65), n48kbps(66), n53kbps(67), n58kbps(68), n62kbps(69), n67kbps(70), n72kbps(71), n77kbps(72), n86kbps(73), n96kbps(74), n106kbps(75), n115kbps(76), n125kbps(77), n134kbps(78), n144kbps(79), n154kbps(80), n170kbps(81), n190kbps(82), n210kbps(83), n230kbps(84), n250kbps(85), n270kbps(86), n290kbps(87), n310kbps(88), n350kbps(89), n380kbps(90), n420kbps(91), n460kbps(92), n500kbps(93), n540kbps(94), n580kbps(95), n610kbps(96), n690kbps(97), n770kbps(98), n840kbps(99), n920kbps(100), n1000kbps(101), n1080kbps(102), n1150kbps(103), n1230kbps(104), n1380kbps(105), n1540kbps(106), n1700kbps(107), n1800kbps(108), n2000kbps(109), n2200kbps(110), n2300kbps(111), n2500kbps(112), n2800kbps(113), n3100kbps(114), n3400kbps(115), n3700kbps(116), n4000kbps(117), n4300kbps(118), n4600kbps(119), n4900kbps(120), n5500kbps(121), n6100kbps(122), n6800kbps(123), n7400kbps(124), n8000kbps(125), n8600kbps(126), n9200kbps(127), n9800kbps(128), n11100kbps(129), n12300kbps(130), n13500kbps(131), n14700kbps(132), n16Mbps(133), n17Mbps(134), n18Mbps(135), n20Mbps(136), n22Mbps(137), n25Mbps(138), n27Mbps(139), n29Mbps(140), n32Mbps(141), n34Mbps(142), n37Mbps(143), n39Mbps(144), n44Mbps(145), n49Mbps(146), n54Mbps(147), n59Mbps(148), n64Mbps(149), n69Mbps(150), n74Mbps(151), n79Mbps(152), n88Mbps(153), n98Mbps(154), n108Mbps(155), n118Mbps(156), n128Mbps(157), n138Mbps(158), n147Mbps(159), n157Mbps(160), n180Mbps(161), n200Mbps(162), n220Mbps(163), n240Mbps(164), n260Mbps(165), n280Mbps(166), n290Mbps(167), n310Mbps(168), n350Mbps(169), n390Mbps(170), n430Mbps(171), n470Mbps(172), n510Mbps(173), n550Mbps(174), n590Mbps(175), n630Mbps(176), n710Mbps(177), n790Mbps(178), n870Mbps(179), n940Mbps(180), n1020Mbps(181), n1100Mbps(182), n1180Mbps(183), n1260Mbps(184), n1420Mbps(185), n1570Mbps(186), n1700Mbps(187), n1900Mbps(188), n2000Mbps(189), n2200Mbps(190), n2400Mbps(191), n2500Mbps(192), n2800Mbps(193), n3100Mbps(194), n3500Mbps(195), n3800Mbps(196), n4100Mbps(197), n4400Mbps(198), n4700Mbps(199), n5000Mbps(200), n5700Mbps(201), n6300Mbps(202), n6900Mbps(203), n7500Mbps(204), n8200Mbps(205), n8800Mbps(206), n9400Mbps(207), n10100Mbps(208), n11300Mbps(209), n12600Mbps(210), n13800Mbps(211), n15100Mbps(212), n16Gbps(213), n18Gbps(214), n19Gbps(215), n20Gbps(216), n23Gbps(217), n25Gbps(218), n28Gbps(219), n30Gbps(220), n33Gbps(221), n35Gbps(222), n38Gbps(223), n40Gbps(224), n45Gbps(225), n50Gbps(226), n55Gbps(227), n60Gbps(228), n65Gbps(229), n70Gbps(230), n75Gbps(231), n81Gbps(232), n91Gbps(233), n101Gbps(234), n111Gbps(235), n121Gbps(236), n131Gbps(237), n141Gbps(238), n151Gbps(239), n160Gbps(240), n180Gbps(241), n200Gbps(242), n220Gbps(243), n240Gbps(244), n260Gbps(245), n280Gbps(246), n300Gbps(247), n320Gbps(248), n360Gbps(249), n400Gbps(250), n440Gbps(251), n480Gbps(252), n520Gbps(253), n560Gbps(254), n600Gbps(255) | ||
| mscAppnLsConnectCost | 1.3.6.1.4.1.562.36.2.1.110.6.13.1.2 | ||
| The cost-per-connect time is a characteristic represented by a single-byte value in the range 0 to 255 that expresses a relative cost of using a transmission group. The units for cost-per-connect time are installation-defined and are typically based on the applicable tariffs of the transmission facility being used by the transmission group. The cost-per-connect time values that a network administrator assigns to the transmission groups in a network should reflect the relative expense of each transmission group as compared to all other transmission groups in the network. A value of 0 means that the cost of connecting over the transmission group is at no additional cost (as in the case of a non-switched facility. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| mscAppnLsByteCost | 1.3.6.1.4.1.562.36.2.1.110.6.13.1.3 | ||
| Cost-per-byte is a single byte value in the range 0 to 255 that expresses a relative cost of transmitting a byte over the associated transmission group. The units for cost-per-byte are user-defined. Like cost-per-connect-time, cost-per-byte is network specific and will not be uniform across networks unless assignments are coordinated. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| mscAppnLsSecurity | 1.3.6.1.4.1.562.36.2.1.110.6.13.1.4 | ||
| This static characteristic indicates the level of security protection. The security values are architecturally defined to provide continuity across all networks. Currently, security is encoded as one of the following seven values: guardedRadiation - guarded conduit containing the transmission medium; protected against physical and radiation tapping. encrypted - link level encryption is provided unknown - has not been determined guardedConduit - guarded conduit; protected against physical tapping secureConduit - secure conduit, not guarded; e.g. pressurized pipe undergroundCable - underground cable located in a secure country publicSwitchedNetwork - public switched network; secure in the sense that there is no predetermined route that traffic will take nonSecure - all else, e.g. satellite-connected, located in a nonsecure country. | |||
| OBJECT-TYPE | |||
| INTEGER | unKnown(0), nonSecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192) | ||
| mscAppnLsPropagationDelay | 1.3.6.1.4.1.562.36.2.1.110.6.13.1.5 | ||
| The propagation delay is the length of time that it takes for a signal to propagate from one end of the transmission group to the other. Typical values are: minimum - minimum negligible - 400 microsec terrestrial - 10 msec packetSwitched - 150 msec long - 300 msec | |||
| OBJECT-TYPE | |||
| INTEGER | minimum(0), negligible(76), terrestrial(113), packetSwitched(145), long(153) | ||
| mscAppnLsUserDefinedParm1 | 1.3.6.1.4.1.562.36.2.1.110.6.13.1.7 | ||
| This is the user defined routing parameter in range 0-255. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..255 | ||
| mscAppnLsUserDefinedParm2 | 1.3.6.1.4.1.562.36.2.1.110.6.13.1.8 | ||
| This is the user defined routing parameter in range 0-255. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..255 | ||
| mscAppnLsUserDefinedParm3 | 1.3.6.1.4.1.562.36.2.1.110.6.13.1.9 | ||
| This is the user defined routing parameter in range 0-255. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..255 | ||
| mscAppnLsStatsTable | 1.3.6.1.4.1.562.36.2.1.110.6.14 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational statistics of the link station. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnLsStatsEntry | |||
| mscAppnLsStatsEntry | 1.3.6.1.4.1.562.36.2.1.110.6.14.1 | ||
| An entry in the mscAppnLsStatsTable. | |||
| OBJECT-TYPE | |||
| MscAppnLsStatsEntry | |||
| mscAppnLsInXidBytes | 1.3.6.1.4.1.562.36.2.1.110.6.14.1.1 | ||
| This attribute counts the total number of XID bytes received on this link station. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnLsInMsgBytes | 1.3.6.1.4.1.562.36.2.1.110.6.14.1.2 | ||
| This attribute counts the total number of message (I-frame) bytes received on this link station. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnLsInXidFrames | 1.3.6.1.4.1.562.36.2.1.110.6.14.1.3 | ||
| This attribute counts the total number of XID frames received on this link station. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnLsInMsgFrames | 1.3.6.1.4.1.562.36.2.1.110.6.14.1.4 | ||
| This attribute counts the total number of message (I-frame) frames received on this link station. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnLsOutXidBytes | 1.3.6.1.4.1.562.36.2.1.110.6.14.1.5 | ||
| This attribute counts the total number of XID bytes sent on this link station. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnLsOutMsgBytes | 1.3.6.1.4.1.562.36.2.1.110.6.14.1.6 | ||
| This attribute counts the total number of message (I-frame) bytes sent on this link station. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnLsOutXidFrames | 1.3.6.1.4.1.562.36.2.1.110.6.14.1.7 | ||
| This attribute counts the total number of XID frames sent on this link station. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnLsOutMsgFrames | 1.3.6.1.4.1.562.36.2.1.110.6.14.1.8 | ||
| This attribute counts the total number of message (I-frame) frames sent on this link station. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnLsInInvalidSnaFrames | 1.3.6.1.4.1.562.36.2.1.110.6.14.1.9 | ||
| This attribute counts the total number of invalid SNA frames received on this link station. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnLsInSessionControlFrames | 1.3.6.1.4.1.562.36.2.1.110.6.14.1.10 | ||
| This attribute counts the total number of session control frames received on this link station. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnLsOutSessionControlFrames | 1.3.6.1.4.1.562.36.2.1.110.6.14.1.11 | ||
| This attribute counts the total number of session control frames sent on this link station. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnLsEchoResponse | 1.3.6.1.4.1.562.36.2.1.110.6.14.1.12 | ||
| This attribute counts the total number of echo responses returned from the adjacent node. A response should be returned for each test frame sent by this node. Echo requests are sent periodically to gauge the propagation delay to the adjacent node. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnLsCurrentDelay | 1.3.6.1.4.1.562.36.2.1.110.6.14.1.13 | ||
| This attribute counts the time (in milliseconds) that it took for the last test signal to be sent and returned from this link station to the adjacent link station. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnLsMaxDelay | 1.3.6.1.4.1.562.36.2.1.110.6.14.1.14 | ||
| This is the longest time taken (in milliseconds) for a test signal to be sent and returned from this link station to the adjacent link station. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnLsMinDelay | 1.3.6.1.4.1.562.36.2.1.110.6.14.1.15 | ||
| This is the shortest time taken (in milliseconds) for a test signal to be sent and returned from this link station to the adjacent link station. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnLsGoodXids | 1.3.6.1.4.1.562.36.2.1.110.6.14.1.17 | ||
| This attribute contains the total number of successful XIDs that have been received on this link station since it was started. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnLsBadXids | 1.3.6.1.4.1.562.36.2.1.110.6.14.1.18 | ||
| This attribute contains the total number of unsuccessful XIDs that have been received on this link station since it was started. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDirEnt | 1.3.6.1.4.1.562.36.2.1.110.7 | ||
| OBJECT IDENTIFIER | |||
| mscAppnDirEntRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.7.1 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscAppnDirEnt components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDirEntRowStatusEntry | |||
| mscAppnDirEntRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.7.1.1 | ||
| A single entry in the table represents a single mscAppnDirEnt component. | |||
| OBJECT-TYPE | |||
| MscAppnDirEntRowStatusEntry | |||
| mscAppnDirEntRowStatus | 1.3.6.1.4.1.562.36.2.1.110.7.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnDirEnt components. These components cannot be added nor deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnDirEntComponentName | 1.3.6.1.4.1.562.36.2.1.110.7.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnDirEntStorageType | 1.3.6.1.4.1.562.36.2.1.110.7.1.1.4 | ||
| This variable represents the storage type value for the mscAppnDirEnt tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnDirEntIndex | 1.3.6.1.4.1.562.36.2.1.110.7.1.1.10 | ||
| This variable represents the index for the mscAppnDirEnt tables. | |||
| OBJECT-TYPE | |||
| AsciiStringIndex | SIZE(1..17) | ||
| mscAppnDirEntOperTable | 1.3.6.1.4.1.562.36.2.1.110.7.10 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group defines the attributes of the Directory Entry server. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDirEntOperEntry | |||
| mscAppnDirEntOperEntry | 1.3.6.1.4.1.562.36.2.1.110.7.10.1 | ||
| An entry in the mscAppnDirEntOperTable. | |||
| OBJECT-TYPE | |||
| MscAppnDirEntOperEntry | |||
| mscAppnDirEntServerName | 1.3.6.1.4.1.562.36.2.1.110.7.10.1.1 | ||
| The fully-qualified control point (CP) name of the network node server. For unassociated end node entries, the end node fully- qualified name is returned. | |||
| OBJECT-TYPE | |||
| AsciiString | SIZE(3..17) | ||
| mscAppnDirEntLuOwnerName | 1.3.6.1.4.1.562.36.2.1.110.7.10.1.2 | ||
| It is the fully-qualified CP name of the node at which the LU is located. This name is the same as the serving NN name when the LU is located at a network node or an unassociated end node. It is also the same as the fully-qualified LU name when this is the control point LU for this node. | |||
| OBJECT-TYPE | |||
| AsciiString | SIZE(3..17) | ||
| mscAppnDirEntLocation | 1.3.6.1.4.1.562.36.2.1.110.7.10.1.3 | ||
| Specifies the location of the resource. This may be one of the following: The resource is at the local node. The resource belongs to an attached end node. The resource is not within the domain of the local node. | |||
| OBJECT-TYPE | |||
| INTEGER | local(0), domain(1), xdomain(2) | ||
| mscAppnDirEntEntryType | 1.3.6.1.4.1.562.36.2.1.110.7.10.1.4 | ||
| Specifies whether the type of the directory entry is: cache - The LU has previously been located by a broadcast search and the location information has been saved. home - The LU is in the domain of the local network node and the LU information has been configured at the local node. register - The LU is at an end node that is in the domain of the local network node. Registered entries are registered by the served end node. | |||
| OBJECT-TYPE | |||
| INTEGER | cache(0), register(2), home(3) | ||
| mscAppnDirEntWildCard | 1.3.6.1.4.1.562.36.2.1.110.7.10.1.5 | ||
| It indicates the type of wildcard used for the resources used for LEN node. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), explicit(2), partialWildcard(3), fullWildcard(4) | ||
| mscAppnAdjNn | 1.3.6.1.4.1.562.36.2.1.110.8 | ||
| OBJECT IDENTIFIER | |||
| mscAppnAdjNnRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.8.1 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscAppnAdjNn components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnAdjNnRowStatusEntry | |||
| mscAppnAdjNnRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.8.1.1 | ||
| A single entry in the table represents a single mscAppnAdjNn component. | |||
| OBJECT-TYPE | |||
| MscAppnAdjNnRowStatusEntry | |||
| mscAppnAdjNnRowStatus | 1.3.6.1.4.1.562.36.2.1.110.8.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnAdjNn components. These components cannot be added nor deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnAdjNnComponentName | 1.3.6.1.4.1.562.36.2.1.110.8.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnAdjNnStorageType | 1.3.6.1.4.1.562.36.2.1.110.8.1.1.4 | ||
| This variable represents the storage type value for the mscAppnAdjNn tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnAdjNnIndex | 1.3.6.1.4.1.562.36.2.1.110.8.1.1.10 | ||
| This variable represents the index for the mscAppnAdjNn tables. | |||
| OBJECT-TYPE | |||
| AsciiStringIndex | SIZE(1..17) | ||
| mscAppnAdjNnOperTable | 1.3.6.1.4.1.562.36.2.1.110.8.10 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** These operational attributes are only available for network nodes which are directly attached to the current node. They are in a separate group. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnAdjNnOperEntry | |||
| mscAppnAdjNnOperEntry | 1.3.6.1.4.1.562.36.2.1.110.8.10.1 | ||
| An entry in the mscAppnAdjNnOperTable. | |||
| OBJECT-TYPE | |||
| MscAppnAdjNnOperEntry | |||
| mscAppnAdjNnCpCpSessStatus | 1.3.6.1.4.1.562.36.2.1.110.8.10.1.1 | ||
| Indicates the state of CP-CP sessions between this node and adjacent network and end nodes. Inactive indicates no CP-CP sessions exists between this node and the adjacent node. Active indicates CP-CP sessions are active using both the ConWinner and ConLoser sessions. The session initiated by this node is referred to as the ConWinner session and is used by this node to send to the adjacent node. The ConLoser session is initiated by the adjacent node and is used by this node to receive from the adjacent node. | |||
| OBJECT-TYPE | |||
| INTEGER | active(1), conLoserActive(2), conWinnerActive(3), inactive(4) | ||
| mscAppnAdjNnOutOfSeqTdus | 1.3.6.1.4.1.562.36.2.1.110.8.10.1.2 | ||
| Number of out of sequence topology database updates (TDU) received from this node. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnAdjNnLastFrsnSent | 1.3.6.1.4.1.562.36.2.1.110.8.10.1.3 | ||
| Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last TDU sent to this adjacent node. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..4294967295 | ||
| mscAppnAdjNnLastFrsnReceived | 1.3.6.1.4.1.562.36.2.1.110.8.10.1.4 | ||
| Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last TDU received from this adjacent node. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..4294967295 | ||
| mscAppnNn | 1.3.6.1.4.1.562.36.2.1.110.9 | ||
| OBJECT IDENTIFIER | |||
| mscAppnNnRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.9.1 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscAppnNn components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnNnRowStatusEntry | |||
| mscAppnNnRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.9.1.1 | ||
| A single entry in the table represents a single mscAppnNn component. | |||
| OBJECT-TYPE | |||
| MscAppnNnRowStatusEntry | |||
| mscAppnNnRowStatus | 1.3.6.1.4.1.562.36.2.1.110.9.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnNn components. These components cannot be added nor deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnNnComponentName | 1.3.6.1.4.1.562.36.2.1.110.9.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnNnStorageType | 1.3.6.1.4.1.562.36.2.1.110.9.1.1.4 | ||
| This variable represents the storage type value for the mscAppnNn tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnNnIndex | 1.3.6.1.4.1.562.36.2.1.110.9.1.1.10 | ||
| This variable represents the index for the mscAppnNn tables. | |||
| OBJECT-TYPE | |||
| AsciiStringIndex | SIZE(1..17) | ||
| mscAppnNnOperTable | 1.3.6.1.4.1.562.36.2.1.110.9.10 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Operational attributes of a network node in the topology database. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnNnOperEntry | |||
| mscAppnNnOperEntry | 1.3.6.1.4.1.562.36.2.1.110.9.10.1 | ||
| An entry in the mscAppnNnOperTable. | |||
| OBJECT-TYPE | |||
| MscAppnNnOperEntry | |||
| mscAppnNnDaysLeft | 1.3.6.1.4.1.562.36.2.1.110.9.10.1.2 | ||
| The number of days before deletion of this node entry from the Topology Database. This is set to zero for the local node entry, which always exists. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 1..15 | ||
| mscAppnNnNodeType | 1.3.6.1.4.1.562.36.2.1.110.9.10.1.3 | ||
| Type of the APPN node. Possible values are networkNode (nn) and virtualRoutingNode (vrn). | |||
| OBJECT-TYPE | |||
| INTEGER | toBeDetermined(0), networkNode(1), virtualRoutingNode(3) | ||
| mscAppnNnResourceSequenceNumber | 1.3.6.1.4.1.562.36.2.1.110.9.10.1.4 | ||
| Resource sequence number. This is assigned by the network node that owns this resource. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..4294967295 | ||
| mscAppnNnRouteAdditionResistance | 1.3.6.1.4.1.562.36.2.1.110.9.10.1.5 | ||
| Route addition resistance indicates the relative desirability of using this node for intermediate session traffic. This value is used for route computation. The lower the value, the more desirable the node is for intermediate routing. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| mscAppnNnStatus | 1.3.6.1.4.1.562.36.2.1.110.9.10.1.6 | ||
| This attribute specifies the status of the node. This may be one or more of the following: congested - If present, indicates that this node is congested. This node is not be included in route selection by other nodes when this congestion exists. irrDepleted - If present, indicates that intermediate session routing resources are depleted. This node is not included in intermediate route selection by other nodes when resources are depleted. SNMP APPN MIB = ibmappnNnNodeIsrDepleted errDepleted - If present, indicates that session endpoint resources are depleted. quiescing - If present, indicates that the node is quiescing. This node is not included in route selection by other nodes when the node is quiescing. Description of bits: congested(0) irrDepleted(1) errDepleted(2) quiescing(3) | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1) | ||
| mscAppnNnFunctionSupported | 1.3.6.1.4.1.562.36.2.1.110.9.10.1.7 | ||
| This attribute specifies which functions are supported. This may be one or more of the following: borderNode - If present, indicates that border node functionality is supported. centralDirectoryServer -If present, indicates that the node is a central directory. gateway - If present, indicates that the node provides gateway functions. isr - If present, indicates that the node supports intermediate session routing. Description of bits: notused0(0) gateway(1) centralDirectoryServer(2) hpr(3) rtp(4) isr(5) borderNode(6) | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1) | ||
| mscAppnLocTg | 1.3.6.1.4.1.562.36.2.1.110.10 | ||
| OBJECT IDENTIFIER | |||
| mscAppnLocTgRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.10.1 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscAppnLocTg components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnLocTgRowStatusEntry | |||
| mscAppnLocTgRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.10.1.1 | ||
| A single entry in the table represents a single mscAppnLocTg component. | |||
| OBJECT-TYPE | |||
| MscAppnLocTgRowStatusEntry | |||
| mscAppnLocTgRowStatus | 1.3.6.1.4.1.562.36.2.1.110.10.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnLocTg components. These components cannot be added nor deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnLocTgComponentName | 1.3.6.1.4.1.562.36.2.1.110.10.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnLocTgStorageType | 1.3.6.1.4.1.562.36.2.1.110.10.1.1.4 | ||
| This variable represents the storage type value for the mscAppnLocTg tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnLocTgDestFqcpNameIndex | 1.3.6.1.4.1.562.36.2.1.110.10.1.1.10 | ||
| This variable represents an index for the mscAppnLocTg tables. | |||
| OBJECT-TYPE | |||
| AsciiStringIndex | SIZE(3..17) | ||
| mscAppnLocTgTransmissionGroupIndex | 1.3.6.1.4.1.562.36.2.1.110.10.1.1.11 | ||
| This variable represents an index for the mscAppnLocTg tables. | |||
| OBJECT-TYPE | |||
| Integer32 | 0..255 | ||
| mscAppnLocTgOperTable | 1.3.6.1.4.1.562.36.2.1.110.10.10 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Gives the operational status of the local node transmission group. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnLocTgOperEntry | |||
| mscAppnLocTgOperEntry | 1.3.6.1.4.1.562.36.2.1.110.10.10.1 | ||
| An entry in the mscAppnLocTgOperTable. | |||
| OBJECT-TYPE | |||
| MscAppnLocTgOperEntry | |||
| mscAppnLocTgStatus | 1.3.6.1.4.1.562.36.2.1.110.10.10.1.1 | ||
| Status of the transmission group can be one of operational, CpCpSession or quiescing. Description of bits: notused0(0) notused1(1) notused2(2) notused3(3) cpCpSession(4) quiescing(5) notused6(6) operational(7) | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1) | ||
| mscAppnLocTgResourceSequenceNumber | 1.3.6.1.4.1.562.36.2.1.110.10.10.1.2 | ||
| This attribute contains the resource sequence number. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..4294967295 | ||
| mscAppnLocTgLinkAddressTable | 1.3.6.1.4.1.562.36.2.1.110.10.11 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Contains the attribute for destination address. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnLocTgLinkAddressEntry | |||
| mscAppnLocTgLinkAddressEntry | 1.3.6.1.4.1.562.36.2.1.110.10.11.1 | ||
| An entry in the mscAppnLocTgLinkAddressTable. | |||
| OBJECT-TYPE | |||
| MscAppnLocTgLinkAddressEntry | |||
| mscAppnLocTgDlcData | 1.3.6.1.4.1.562.36.2.1.110.10.11.1.1 | ||
| This attribute contains specific data related to the link connection. Token-Ring - contains MAC/SAP X.25 Switched - contains dial digits X.21 Switched - contains dial digits Circuit Switched - contains dial digits Frame-Relay - contains DLCI and SAP The value will be set to zero if the destination node type is not a virtual routing node. | |||
| OBJECT-TYPE | |||
| HexString | SIZE(0..32) | ||
| mscAppnLocTgTgCharTable | 1.3.6.1.4.1.562.36.2.1.110.10.12 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** These attributes of the link station are in a group using a common structure. This set provides the TG characteristics of the link through this link station for route selection. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnLocTgTgCharEntry | |||
| mscAppnLocTgTgCharEntry | 1.3.6.1.4.1.562.36.2.1.110.10.12.1 | ||
| An entry in the mscAppnLocTgTgCharTable. | |||
| OBJECT-TYPE | |||
| MscAppnLocTgTgCharEntry | |||
| mscAppnLocTgEffectiveCap | 1.3.6.1.4.1.562.36.2.1.110.10.12.1.1 | ||
| The effective capacity is an integer value that indicates the capacity in kilo bits per second. It is derived from the link bandwidth and the maximum load factor with the range of 0 thru 603,979,776. | |||
| OBJECT-TYPE | |||
| INTEGER | min(0), n170bps(1), n190bps(2), n210bps(3), n230bps(4), n240bps(5), n260bps(6), n280bps(7), n300bps(8), n340bps(9), n380bps(10), n410bps(11), n450bps(12), n490bps(13), n530bps(14), n560bps(15), n600bps(16), n680bps(17), n750bps(18), n830bps(19), n900bps(20), n980bps(21), n1050bps(22), n1130bps(23), n1200bps(24), n1350bps(25), n1500bps(26), n1700bps(27), n1800bps(28), n2000bps(29), n2100bps(30), n2300bps(31), n2400bps(32), n2700bps(33), n3000bps(34), n3300bps(35), n3600bps(36), n3900bps(37), n4200bps(38), n4500bps(39), n4800bps(40), n5400bps(41), n6000bps(42), n6600bps(43), n7200bps(44), n7800bps(45), n8400bps(46), n9000bps(47), n9600bps(48), n10800bps(49), n12000bps(50), n13200bps(51), n14400bps(52), n15600bps(53), n17kbps(54), n18kbps(55), n19kbps(56), n22kbps(57), n24kbps(58), n26kbps(59), n29kbps(60), n31kbps(61), n34kbps(62), n36kbps(63), n38kbps(64), n43kbps(65), n48kbps(66), n53kbps(67), n58kbps(68), n62kbps(69), n67kbps(70), n72kbps(71), n77kbps(72), n86kbps(73), n96kbps(74), n106kbps(75), n115kbps(76), n125kbps(77), n134kbps(78), n144kbps(79), n154kbps(80), n170kbps(81), n190kbps(82), n210kbps(83), n230kbps(84), n250kbps(85), n270kbps(86), n290kbps(87), n310kbps(88), n350kbps(89), n380kbps(90), n420kbps(91), n460kbps(92), n500kbps(93), n540kbps(94), n580kbps(95), n610kbps(96), n690kbps(97), n770kbps(98), n840kbps(99), n920kbps(100), n1000kbps(101), n1080kbps(102), n1150kbps(103), n1230kbps(104), n1380kbps(105), n1540kbps(106), n1700kbps(107), n1800kbps(108), n2000kbps(109), n2200kbps(110), n2300kbps(111), n2500kbps(112), n2800kbps(113), n3100kbps(114), n3400kbps(115), n3700kbps(116), n4000kbps(117), n4300kbps(118), n4600kbps(119), n4900kbps(120), n5500kbps(121), n6100kbps(122), n6800kbps(123), n7400kbps(124), n8000kbps(125), n8600kbps(126), n9200kbps(127), n9800kbps(128), n11100kbps(129), n12300kbps(130), n13500kbps(131), n14700kbps(132), n16Mbps(133), n17Mbps(134), n18Mbps(135), n20Mbps(136), n22Mbps(137), n25Mbps(138), n27Mbps(139), n29Mbps(140), n32Mbps(141), n34Mbps(142), n37Mbps(143), n39Mbps(144), n44Mbps(145), n49Mbps(146), n54Mbps(147), n59Mbps(148), n64Mbps(149), n69Mbps(150), n74Mbps(151), n79Mbps(152), n88Mbps(153), n98Mbps(154), n108Mbps(155), n118Mbps(156), n128Mbps(157), n138Mbps(158), n147Mbps(159), n157Mbps(160), n180Mbps(161), n200Mbps(162), n220Mbps(163), n240Mbps(164), n260Mbps(165), n280Mbps(166), n290Mbps(167), n310Mbps(168), n350Mbps(169), n390Mbps(170), n430Mbps(171), n470Mbps(172), n510Mbps(173), n550Mbps(174), n590Mbps(175), n630Mbps(176), n710Mbps(177), n790Mbps(178), n870Mbps(179), n940Mbps(180), n1020Mbps(181), n1100Mbps(182), n1180Mbps(183), n1260Mbps(184), n1420Mbps(185), n1570Mbps(186), n1700Mbps(187), n1900Mbps(188), n2000Mbps(189), n2200Mbps(190), n2400Mbps(191), n2500Mbps(192), n2800Mbps(193), n3100Mbps(194), n3500Mbps(195), n3800Mbps(196), n4100Mbps(197), n4400Mbps(198), n4700Mbps(199), n5000Mbps(200), n5700Mbps(201), n6300Mbps(202), n6900Mbps(203), n7500Mbps(204), n8200Mbps(205), n8800Mbps(206), n9400Mbps(207), n10100Mbps(208), n11300Mbps(209), n12600Mbps(210), n13800Mbps(211), n15100Mbps(212), n16Gbps(213), n18Gbps(214), n19Gbps(215), n20Gbps(216), n23Gbps(217), n25Gbps(218), n28Gbps(219), n30Gbps(220), n33Gbps(221), n35Gbps(222), n38Gbps(223), n40Gbps(224), n45Gbps(225), n50Gbps(226), n55Gbps(227), n60Gbps(228), n65Gbps(229), n70Gbps(230), n75Gbps(231), n81Gbps(232), n91Gbps(233), n101Gbps(234), n111Gbps(235), n121Gbps(236), n131Gbps(237), n141Gbps(238), n151Gbps(239), n160Gbps(240), n180Gbps(241), n200Gbps(242), n220Gbps(243), n240Gbps(244), n260Gbps(245), n280Gbps(246), n300Gbps(247), n320Gbps(248), n360Gbps(249), n400Gbps(250), n440Gbps(251), n480Gbps(252), n520Gbps(253), n560Gbps(254), n600Gbps(255) | ||
| mscAppnLocTgConnectCost | 1.3.6.1.4.1.562.36.2.1.110.10.12.1.2 | ||
| The cost-per-connect time is a characteristic represented by a single-byte value in the range 0 to 255 that expresses a relative cost of using a transmission group. The units for cost-per-connect time are installation-defined and are typically based on the applicable tariffs of the transmission facility being used by the transmission group. The cost-per-connect time values that a network administrator assigns to the transmission groups in a network should reflect the relative expense of each transmission group as compared to all other transmission groups in the network. A value of 0 means that the cost of connecting over the transmission group is at no additional cost (as in the case of a non-switched facility. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| mscAppnLocTgByteCost | 1.3.6.1.4.1.562.36.2.1.110.10.12.1.3 | ||
| Cost-per-byte is a single byte value in the range 0 to 255 that expresses a relative cost of transmitting a byte over the associated transmission group. The units for cost-per-byte are user-defined. Like cost-per-connect-time, cost-per-byte is network specific and will not be uniform across networks unless assignments are coordinated. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| mscAppnLocTgSecurity | 1.3.6.1.4.1.562.36.2.1.110.10.12.1.4 | ||
| This static characteristic indicates the level of security protection. The security values are architecturally defined to provide continuity across all networks. Currently, security is encoded as one of the following seven values: guardedRadiation - guarded conduit containing the transmission medium; protected against physical and radiation tapping. encrypted - link level encryption is provided unknown - has not been determined guardedConduit - guarded conduit; protected against physical tapping secureConduit - secure conduit, not guarded; e.g. pressurized pipe undergroundCable - underground cable located in a secure country publicSwitchedNetwork - public switched network; secure in the sense that there is no predetermined route that traffic will take nonSecure - all else, e.g. satellite-connected, located in a nonsecure country. | |||
| OBJECT-TYPE | |||
| INTEGER | unKnown(0), nonSecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192) | ||
| mscAppnLocTgPropagationDelay | 1.3.6.1.4.1.562.36.2.1.110.10.12.1.5 | ||
| The propagation delay is the length of time that it takes for a signal to propagate from one end of the transmission group to the other. Typical values are: minimum - minimum negligible - 400 microsec terrestrial - 10 msec packetSwitched - 150 msec long - 300 msec | |||
| OBJECT-TYPE | |||
| INTEGER | minimum(0), negligible(76), terrestrial(113), packetSwitched(145), long(153) | ||
| mscAppnLocTgUserDefinedParm1 | 1.3.6.1.4.1.562.36.2.1.110.10.12.1.7 | ||
| This is the user defined routing parameter in range 0-255. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..255 | ||
| mscAppnLocTgUserDefinedParm2 | 1.3.6.1.4.1.562.36.2.1.110.10.12.1.8 | ||
| This is the user defined routing parameter in range 0-255. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..255 | ||
| mscAppnLocTgUserDefinedParm3 | 1.3.6.1.4.1.562.36.2.1.110.10.12.1.9 | ||
| This is the user defined routing parameter in range 0-255. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..255 | ||
| mscAppnIsrSess | 1.3.6.1.4.1.562.36.2.1.110.11 | ||
| OBJECT IDENTIFIER | |||
| mscAppnIsrSessRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.11.1 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscAppnIsrSess components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnIsrSessRowStatusEntry | |||
| mscAppnIsrSessRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.11.1.1 | ||
| A single entry in the table represents a single mscAppnIsrSess component. | |||
| OBJECT-TYPE | |||
| MscAppnIsrSessRowStatusEntry | |||
| mscAppnIsrSessRowStatus | 1.3.6.1.4.1.562.36.2.1.110.11.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnIsrSess components. These components cannot be added nor deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnIsrSessComponentName | 1.3.6.1.4.1.562.36.2.1.110.11.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnIsrSessStorageType | 1.3.6.1.4.1.562.36.2.1.110.11.1.1.4 | ||
| This variable represents the storage type value for the mscAppnIsrSess tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnIsrSessFqcpNameIndex | 1.3.6.1.4.1.562.36.2.1.110.11.1.1.10 | ||
| This variable represents an index for the mscAppnIsrSess tables. | |||
| OBJECT-TYPE | |||
| AsciiStringIndex | SIZE(3..17) | ||
| mscAppnIsrSessProcedureCorrelationIdIndex | 1.3.6.1.4.1.562.36.2.1.110.11.1.1.11 | ||
| This variable represents an index for the mscAppnIsrSess tables. | |||
| OBJECT-TYPE | |||
| HexString | SIZE(8) | ||
| mscAppnIsrSessOperTable | 1.3.6.1.4.1.562.36.2.1.110.11.10 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This component contains dynamic information about an intermediate session for which the network node is providing transit routing. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnIsrSessOperEntry | |||
| mscAppnIsrSessOperEntry | 1.3.6.1.4.1.562.36.2.1.110.11.10.1 | ||
| An entry in the mscAppnIsrSessOperTable. | |||
| OBJECT-TYPE | |||
| MscAppnIsrSessOperEntry | |||
| mscAppnIsrSessTransmissionPriority | 1.3.6.1.4.1.562.36.2.1.110.11.10.1.1 | ||
| This attribute contains the transmission priority. This is one of low, medium, high or network. | |||
| OBJECT-TYPE | |||
| INTEGER | low(1), medium(2), high(3), network(4) | ||
| mscAppnIsrSessCosName | 1.3.6.1.4.1.562.36.2.1.110.11.10.1.2 | ||
| This is the class of service used to select the route. Class of service (COS) is a designation of the transport network characteristics, such as route security, transmission priority, and bandwidth, needed for a particular session. The class of service is derived from the mode name specified by the initiator of the session. | |||
| OBJECT-TYPE | |||
| AsciiString | SIZE(1..8) | ||
| mscAppnIsrSessLimitedResource | 1.3.6.1.4.1.562.36.2.1.110.11.10.1.3 | ||
| This attribute specifies whether the session uses a limited resource link. A limited resource link remains active only when being used and is deactivated when session traffic ceases. | |||
| OBJECT-TYPE | |||
| INTEGER | yes(1), no(2) | ||
| mscAppnIsrSessPriStats | 1.3.6.1.4.1.562.36.2.1.110.11.100 | ||
| OBJECT IDENTIFIER | |||
| mscAppnIsrSessPriStatsRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.11.100.1 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscAppnIsrSessPriStats components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnIsrSessPriStatsRowStatusEntry | |||
| mscAppnIsrSessPriStatsRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.11.100.1.1 | ||
| A single entry in the table represents a single mscAppnIsrSessPriStats component. | |||
| OBJECT-TYPE | |||
| MscAppnIsrSessPriStatsRowStatusEntry | |||
| mscAppnIsrSessPriStatsRowStatus | 1.3.6.1.4.1.562.36.2.1.110.11.100.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnIsrSessPriStats components. These components cannot be added nor deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnIsrSessPriStatsComponentName | 1.3.6.1.4.1.562.36.2.1.110.11.100.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnIsrSessPriStatsStorageType | 1.3.6.1.4.1.562.36.2.1.110.11.100.1.1.4 | ||
| This variable represents the storage type value for the mscAppnIsrSessPriStats tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnIsrSessPriStatsIndex | 1.3.6.1.4.1.562.36.2.1.110.11.100.1.1.10 | ||
| This variable represents the index for the mscAppnIsrSessPriStats tables. | |||
| OBJECT-TYPE | |||
| NonReplicated | |||
| mscAppnIsrSessPriStatsStatsTable | 1.3.6.1.4.1.562.36.2.1.110.11.100.10 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This component contains counters and statistics for a session. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnIsrSessPriStatsStatsEntry | |||
| mscAppnIsrSessPriStatsStatsEntry | 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1 | ||
| An entry in the mscAppnIsrSessPriStatsStatsTable. | |||
| OBJECT-TYPE | |||
| MscAppnIsrSessPriStatsStatsEntry | |||
| mscAppnIsrSessPriStatsRxRuSize | 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.1 | ||
| This is the maximum request unit (RU) size that can be used on the session. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| mscAppnIsrSessPriStatsMaxTxBtuSize | 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.2 | ||
| This is the maximum BTU size (length of the information field in a frame) that can be sent on the session. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| mscAppnIsrSessPriStatsMaxRxBtuSize | 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.3 | ||
| This is the maximum BTU size (length of the information field in a frame) that can be received on the session. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| mscAppnIsrSessPriStatsMaxTxPacWin | 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.4 | ||
| This is the maximum size of the send pacing window on the session. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..32767 | ||
| mscAppnIsrSessPriStatsCurTxPacWin | 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.5 | ||
| This is the current size of the send pacing window on the session. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..32767 | ||
| mscAppnIsrSessPriStatsMaxRxPacWin | 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.6 | ||
| This is the maximum size of the receive pacing window on the session. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..32767 | ||
| mscAppnIsrSessPriStatsCurRxPacWin | 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.7 | ||
| This is the current size of the receive pacing window on the session. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..32767 | ||
| mscAppnIsrSessPriStatsTxDataframes | 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.8 | ||
| This attribute counts the number of normal flow data frames sent on the session, the counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnIsrSessPriStatsTxFmdFrames | 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.9 | ||
| This attribute counts the number of FMD data frames sent on the session, the counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnIsrSessPriStatsTxDataBytes | 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.10 | ||
| This is the number of normal flow data bytes sent on the session, the counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnIsrSessPriStatsRxDataFrames | 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.11 | ||
| This is the number of normal flow data frames received on the session, the counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnIsrSessPriStatsRxFmdFrames | 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.12 | ||
| This attribute counts the number of FMD data frames received on the session, the counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnIsrSessPriStatsRxDataBytes | 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.13 | ||
| This is the number of normal flow data bytes received on the session, the counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnIsrSessPriStatsSidh | 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.14 | ||
| This attribute contains the session identifier high byte on the session. | |||
| OBJECT-TYPE | |||
| Hex | 0..255 | ||
| mscAppnIsrSessPriStatsSidl | 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.15 | ||
| This attribute contains the session ID low byte on the SSCP session. | |||
| OBJECT-TYPE | |||
| Hex | 0..255 | ||
| mscAppnIsrSessPriStatsOdai | 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.16 | ||
| This is the origin destination assignor indicator (ODAI) on the session. | |||
| OBJECT-TYPE | |||
| INTEGER | primary(0), secondary(1) | ||
| mscAppnIsrSessPriStatsLsName | 1.3.6.1.4.1.562.36.2.1.110.11.100.10.1.17 | ||
| This is the link station name associated with these counters and statistics. This is an 8 character name of the link station over which the data flowed. This field can be used to correlate the session statistics with the link over which session data flows. | |||
| OBJECT-TYPE | |||
| AsciiString | SIZE(1..8) | ||
| mscAppnIsrSessSecStats | 1.3.6.1.4.1.562.36.2.1.110.11.101 | ||
| OBJECT IDENTIFIER | |||
| mscAppnIsrSessSecStatsRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.11.101.1 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscAppnIsrSessSecStats components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnIsrSessSecStatsRowStatusEntry | |||
| mscAppnIsrSessSecStatsRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.11.101.1.1 | ||
| A single entry in the table represents a single mscAppnIsrSessSecStats component. | |||
| OBJECT-TYPE | |||
| MscAppnIsrSessSecStatsRowStatusEntry | |||
| mscAppnIsrSessSecStatsRowStatus | 1.3.6.1.4.1.562.36.2.1.110.11.101.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnIsrSessSecStats components. These components cannot be added nor deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnIsrSessSecStatsComponentName | 1.3.6.1.4.1.562.36.2.1.110.11.101.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnIsrSessSecStatsStorageType | 1.3.6.1.4.1.562.36.2.1.110.11.101.1.1.4 | ||
| This variable represents the storage type value for the mscAppnIsrSessSecStats tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnIsrSessSecStatsIndex | 1.3.6.1.4.1.562.36.2.1.110.11.101.1.1.10 | ||
| This variable represents the index for the mscAppnIsrSessSecStats tables. | |||
| OBJECT-TYPE | |||
| NonReplicated | |||
| mscAppnIsrSessSecStatsStatsTable | 1.3.6.1.4.1.562.36.2.1.110.11.101.10 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This component contains counters and statistics for a session. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnIsrSessSecStatsStatsEntry | |||
| mscAppnIsrSessSecStatsStatsEntry | 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1 | ||
| An entry in the mscAppnIsrSessSecStatsStatsTable. | |||
| OBJECT-TYPE | |||
| MscAppnIsrSessSecStatsStatsEntry | |||
| mscAppnIsrSessSecStatsRxRuSize | 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.1 | ||
| This is the maximum request unit (RU) size that can be used on the session. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| mscAppnIsrSessSecStatsMaxTxBtuSize | 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.2 | ||
| This is the maximum BTU size (length of the information field in a frame) that can be sent on the session. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| mscAppnIsrSessSecStatsMaxRxBtuSize | 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.3 | ||
| This is the maximum BTU size (length of the information field in a frame) that can be received on the session. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| mscAppnIsrSessSecStatsMaxTxPacWin | 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.4 | ||
| This is the maximum size of the send pacing window on the session. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..32767 | ||
| mscAppnIsrSessSecStatsCurTxPacWin | 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.5 | ||
| This is the current size of the send pacing window on the session. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..32767 | ||
| mscAppnIsrSessSecStatsMaxRxPacWin | 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.6 | ||
| This is the maximum size of the receive pacing window on the session. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..32767 | ||
| mscAppnIsrSessSecStatsCurRxPacWin | 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.7 | ||
| This is the current size of the receive pacing window on the session. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..32767 | ||
| mscAppnIsrSessSecStatsTxDataframes | 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.8 | ||
| This attribute counts the number of normal flow data frames sent on the session, the counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnIsrSessSecStatsTxFmdFrames | 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.9 | ||
| This attribute counts the number of FMD data frames sent on the session, the counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnIsrSessSecStatsTxDataBytes | 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.10 | ||
| This is the number of normal flow data bytes sent on the session, the counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnIsrSessSecStatsRxDataFrames | 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.11 | ||
| This is the number of normal flow data frames received on the session, the counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnIsrSessSecStatsRxFmdFrames | 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.12 | ||
| This attribute counts the number of FMD data frames received on the session, the counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnIsrSessSecStatsRxDataBytes | 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.13 | ||
| This is the number of normal flow data bytes received on the session, the counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnIsrSessSecStatsSidh | 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.14 | ||
| This attribute contains the session identifier high byte on the session. | |||
| OBJECT-TYPE | |||
| Hex | 0..255 | ||
| mscAppnIsrSessSecStatsSidl | 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.15 | ||
| This attribute contains the session ID low byte on the SSCP session. | |||
| OBJECT-TYPE | |||
| Hex | 0..255 | ||
| mscAppnIsrSessSecStatsOdai | 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.16 | ||
| This is the origin destination assignor indicator (ODAI) on the session. | |||
| OBJECT-TYPE | |||
| INTEGER | primary(0), secondary(1) | ||
| mscAppnIsrSessSecStatsLsName | 1.3.6.1.4.1.562.36.2.1.110.11.101.10.1.17 | ||
| This is the link station name associated with these counters and statistics. This is an 8 character name of the link station over which the data flowed. This field can be used to correlate the session statistics with the link over which session data flows. | |||
| OBJECT-TYPE | |||
| AsciiString | SIZE(1..8) | ||
| mscAppnNnTg | 1.3.6.1.4.1.562.36.2.1.110.12 | ||
| OBJECT IDENTIFIER | |||
| mscAppnNnTgRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.12.1 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscAppnNnTg components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnNnTgRowStatusEntry | |||
| mscAppnNnTgRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.12.1.1 | ||
| A single entry in the table represents a single mscAppnNnTg component. | |||
| OBJECT-TYPE | |||
| MscAppnNnTgRowStatusEntry | |||
| mscAppnNnTgRowStatus | 1.3.6.1.4.1.562.36.2.1.110.12.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnNnTg components. These components cannot be added nor deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnNnTgComponentName | 1.3.6.1.4.1.562.36.2.1.110.12.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnNnTgStorageType | 1.3.6.1.4.1.562.36.2.1.110.12.1.1.4 | ||
| This variable represents the storage type value for the mscAppnNnTg tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnNnTgOwnerFqcpNameIndex | 1.3.6.1.4.1.562.36.2.1.110.12.1.1.10 | ||
| This variable represents an index for the mscAppnNnTg tables. | |||
| OBJECT-TYPE | |||
| AsciiStringIndex | SIZE(3..17) | ||
| mscAppnNnTgDestFqcpNameIndex | 1.3.6.1.4.1.562.36.2.1.110.12.1.1.11 | ||
| This variable represents an index for the mscAppnNnTg tables. | |||
| OBJECT-TYPE | |||
| AsciiStringIndex | SIZE(3..17) | ||
| mscAppnNnTgTransmissionGroupIndex | 1.3.6.1.4.1.562.36.2.1.110.12.1.1.12 | ||
| This variable represents an index for the mscAppnNnTg tables. | |||
| OBJECT-TYPE | |||
| Integer32 | 0..255 | ||
| mscAppnNnTgOperTable | 1.3.6.1.4.1.562.36.2.1.110.12.10 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational status of the transmission group entry in the topology database. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnNnTgOperEntry | |||
| mscAppnNnTgOperEntry | 1.3.6.1.4.1.562.36.2.1.110.12.10.1 | ||
| An entry in the mscAppnNnTgOperTable. | |||
| OBJECT-TYPE | |||
| MscAppnNnTgOperEntry | |||
| mscAppnNnTgFlowReductionSequenceNumber | 1.3.6.1.4.1.562.36.2.1.110.12.10.1.1 | ||
| Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This FRSN indicates the last time this resource was updated at this node. SNMP APPN MIB = ibmappnNnTgFrsn | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..4294967295 | ||
| mscAppnNnTgDaysLeft | 1.3.6.1.4.1.562.36.2.1.110.12.10.1.2 | ||
| Number of days left until entry purged. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 1..15 | ||
| mscAppnNnTgResourceSequenceNumber | 1.3.6.1.4.1.562.36.2.1.110.12.10.1.3 | ||
| Resource sequence number. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..4294967295 | ||
| mscAppnNnTgStatus | 1.3.6.1.4.1.562.36.2.1.110.12.10.1.4 | ||
| This attribute contains status information about the transmission group from the topology database. It can be any combination of the following: operational If present indicates that the transmission group is operational. CpCpSessions If present, indicates that CP-CP sessions are supported on this transmission group. quiescing If present, indicates that the transmission group is quiescing. Description of bits: notused0(0) notused1(1) notused2(2) notused3(3) cpCpSessions(4) quiescing(5) notused6(6) operational(7) | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1) | ||
| mscAppnNnTgLinkAddressTable | 1.3.6.1.4.1.562.36.2.1.110.12.11 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Contains the attribute for destination address. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnNnTgLinkAddressEntry | |||
| mscAppnNnTgLinkAddressEntry | 1.3.6.1.4.1.562.36.2.1.110.12.11.1 | ||
| An entry in the mscAppnNnTgLinkAddressTable. | |||
| OBJECT-TYPE | |||
| MscAppnNnTgLinkAddressEntry | |||
| mscAppnNnTgDlcData | 1.3.6.1.4.1.562.36.2.1.110.12.11.1.1 | ||
| This attribute contains specific data related to the link connection. Token-Ring - contains MAC/SAP X.25 Switched - contains dial digits X.21 Switched - contains dial digits Circuit Switched - contains dial digits Frame-Relay - contains DLCI and SAP The value will be set to zero if the destination node type is not a virtual routing node. | |||
| OBJECT-TYPE | |||
| HexString | SIZE(0..32) | ||
| mscAppnNnTgTgCharTable | 1.3.6.1.4.1.562.36.2.1.110.12.12 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** These attributes of the link station are in a group using a common structure. This set provides the TG characteristics of the link through this link station for route selection. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnNnTgTgCharEntry | |||
| mscAppnNnTgTgCharEntry | 1.3.6.1.4.1.562.36.2.1.110.12.12.1 | ||
| An entry in the mscAppnNnTgTgCharTable. | |||
| OBJECT-TYPE | |||
| MscAppnNnTgTgCharEntry | |||
| mscAppnNnTgEffectiveCap | 1.3.6.1.4.1.562.36.2.1.110.12.12.1.1 | ||
| The effective capacity is an integer value that indicates the capacity in kilo bits per second. It is derived from the link bandwidth and the maximum load factor with the range of 0 thru 603,979,776. | |||
| OBJECT-TYPE | |||
| INTEGER | min(0), n170bps(1), n190bps(2), n210bps(3), n230bps(4), n240bps(5), n260bps(6), n280bps(7), n300bps(8), n340bps(9), n380bps(10), n410bps(11), n450bps(12), n490bps(13), n530bps(14), n560bps(15), n600bps(16), n680bps(17), n750bps(18), n830bps(19), n900bps(20), n980bps(21), n1050bps(22), n1130bps(23), n1200bps(24), n1350bps(25), n1500bps(26), n1700bps(27), n1800bps(28), n2000bps(29), n2100bps(30), n2300bps(31), n2400bps(32), n2700bps(33), n3000bps(34), n3300bps(35), n3600bps(36), n3900bps(37), n4200bps(38), n4500bps(39), n4800bps(40), n5400bps(41), n6000bps(42), n6600bps(43), n7200bps(44), n7800bps(45), n8400bps(46), n9000bps(47), n9600bps(48), n10800bps(49), n12000bps(50), n13200bps(51), n14400bps(52), n15600bps(53), n17kbps(54), n18kbps(55), n19kbps(56), n22kbps(57), n24kbps(58), n26kbps(59), n29kbps(60), n31kbps(61), n34kbps(62), n36kbps(63), n38kbps(64), n43kbps(65), n48kbps(66), n53kbps(67), n58kbps(68), n62kbps(69), n67kbps(70), n72kbps(71), n77kbps(72), n86kbps(73), n96kbps(74), n106kbps(75), n115kbps(76), n125kbps(77), n134kbps(78), n144kbps(79), n154kbps(80), n170kbps(81), n190kbps(82), n210kbps(83), n230kbps(84), n250kbps(85), n270kbps(86), n290kbps(87), n310kbps(88), n350kbps(89), n380kbps(90), n420kbps(91), n460kbps(92), n500kbps(93), n540kbps(94), n580kbps(95), n610kbps(96), n690kbps(97), n770kbps(98), n840kbps(99), n920kbps(100), n1000kbps(101), n1080kbps(102), n1150kbps(103), n1230kbps(104), n1380kbps(105), n1540kbps(106), n1700kbps(107), n1800kbps(108), n2000kbps(109), n2200kbps(110), n2300kbps(111), n2500kbps(112), n2800kbps(113), n3100kbps(114), n3400kbps(115), n3700kbps(116), n4000kbps(117), n4300kbps(118), n4600kbps(119), n4900kbps(120), n5500kbps(121), n6100kbps(122), n6800kbps(123), n7400kbps(124), n8000kbps(125), n8600kbps(126), n9200kbps(127), n9800kbps(128), n11100kbps(129), n12300kbps(130), n13500kbps(131), n14700kbps(132), n16Mbps(133), n17Mbps(134), n18Mbps(135), n20Mbps(136), n22Mbps(137), n25Mbps(138), n27Mbps(139), n29Mbps(140), n32Mbps(141), n34Mbps(142), n37Mbps(143), n39Mbps(144), n44Mbps(145), n49Mbps(146), n54Mbps(147), n59Mbps(148), n64Mbps(149), n69Mbps(150), n74Mbps(151), n79Mbps(152), n88Mbps(153), n98Mbps(154), n108Mbps(155), n118Mbps(156), n128Mbps(157), n138Mbps(158), n147Mbps(159), n157Mbps(160), n180Mbps(161), n200Mbps(162), n220Mbps(163), n240Mbps(164), n260Mbps(165), n280Mbps(166), n290Mbps(167), n310Mbps(168), n350Mbps(169), n390Mbps(170), n430Mbps(171), n470Mbps(172), n510Mbps(173), n550Mbps(174), n590Mbps(175), n630Mbps(176), n710Mbps(177), n790Mbps(178), n870Mbps(179), n940Mbps(180), n1020Mbps(181), n1100Mbps(182), n1180Mbps(183), n1260Mbps(184), n1420Mbps(185), n1570Mbps(186), n1700Mbps(187), n1900Mbps(188), n2000Mbps(189), n2200Mbps(190), n2400Mbps(191), n2500Mbps(192), n2800Mbps(193), n3100Mbps(194), n3500Mbps(195), n3800Mbps(196), n4100Mbps(197), n4400Mbps(198), n4700Mbps(199), n5000Mbps(200), n5700Mbps(201), n6300Mbps(202), n6900Mbps(203), n7500Mbps(204), n8200Mbps(205), n8800Mbps(206), n9400Mbps(207), n10100Mbps(208), n11300Mbps(209), n12600Mbps(210), n13800Mbps(211), n15100Mbps(212), n16Gbps(213), n18Gbps(214), n19Gbps(215), n20Gbps(216), n23Gbps(217), n25Gbps(218), n28Gbps(219), n30Gbps(220), n33Gbps(221), n35Gbps(222), n38Gbps(223), n40Gbps(224), n45Gbps(225), n50Gbps(226), n55Gbps(227), n60Gbps(228), n65Gbps(229), n70Gbps(230), n75Gbps(231), n81Gbps(232), n91Gbps(233), n101Gbps(234), n111Gbps(235), n121Gbps(236), n131Gbps(237), n141Gbps(238), n151Gbps(239), n160Gbps(240), n180Gbps(241), n200Gbps(242), n220Gbps(243), n240Gbps(244), n260Gbps(245), n280Gbps(246), n300Gbps(247), n320Gbps(248), n360Gbps(249), n400Gbps(250), n440Gbps(251), n480Gbps(252), n520Gbps(253), n560Gbps(254), n600Gbps(255) | ||
| mscAppnNnTgConnectCost | 1.3.6.1.4.1.562.36.2.1.110.12.12.1.2 | ||
| The cost-per-connect time is a characteristic represented by a single-byte value in the range 0 to 255 that expresses a relative cost of using a transmission group. The units for cost-per-connect time are installation-defined and are typically based on the applicable tariffs of the transmission facility being used by the transmission group. The cost-per-connect time values that a network administrator assigns to the transmission groups in a network should reflect the relative expense of each transmission group as compared to all other transmission groups in the network. A value of 0 means that the cost of connecting over the transmission group is at no additional cost (as in the case of a non-switched facility. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| mscAppnNnTgByteCost | 1.3.6.1.4.1.562.36.2.1.110.12.12.1.3 | ||
| Cost-per-byte is a single byte value in the range 0 to 255 that expresses a relative cost of transmitting a byte over the associated transmission group. The units for cost-per-byte are user-defined. Like cost-per-connect-time, cost-per-byte is network specific and will not be uniform across networks unless assignments are coordinated. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| mscAppnNnTgSecurity | 1.3.6.1.4.1.562.36.2.1.110.12.12.1.4 | ||
| This static characteristic indicates the level of security protection. The security values are architecturally defined to provide continuity across all networks. Currently, security is encoded as one of the following seven values: guardedRadiation - guarded conduit containing the transmission medium; protected against physical and radiation tapping. encrypted - link level encryption is provided unknown - has not been determined guardedConduit - guarded conduit; protected against physical tapping secureConduit - secure conduit, not guarded; e.g. pressurized pipe undergroundCable - underground cable located in a secure country publicSwitchedNetwork - public switched network; secure in the sense that there is no predetermined route that traffic will take nonSecure - all else, e.g. satellite-connected, located in a nonsecure country. | |||
| OBJECT-TYPE | |||
| INTEGER | unKnown(0), nonSecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192) | ||
| mscAppnNnTgPropagationDelay | 1.3.6.1.4.1.562.36.2.1.110.12.12.1.5 | ||
| The propagation delay is the length of time that it takes for a signal to propagate from one end of the transmission group to the other. Typical values are: minimum - minimum negligible - 400 microsec terrestrial - 10 msec packetSwitched - 150 msec long - 300 msec | |||
| OBJECT-TYPE | |||
| INTEGER | minimum(0), negligible(76), terrestrial(113), packetSwitched(145), long(153) | ||
| mscAppnNnTgUserDefinedParm1 | 1.3.6.1.4.1.562.36.2.1.110.12.12.1.7 | ||
| This is the user defined routing parameter in range 0-255. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..255 | ||
| mscAppnNnTgUserDefinedParm2 | 1.3.6.1.4.1.562.36.2.1.110.12.12.1.8 | ||
| This is the user defined routing parameter in range 0-255. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..255 | ||
| mscAppnNnTgUserDefinedParm3 | 1.3.6.1.4.1.562.36.2.1.110.12.12.1.9 | ||
| This is the user defined routing parameter in range 0-255. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..255 | ||
| mscAppnRtp | 1.3.6.1.4.1.562.36.2.1.110.13 | ||
| OBJECT IDENTIFIER | |||
| mscAppnRtpRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.13.1 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscAppnRtp components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnRtpRowStatusEntry | |||
| mscAppnRtpRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.13.1.1 | ||
| A single entry in the table represents a single mscAppnRtp component. | |||
| OBJECT-TYPE | |||
| MscAppnRtpRowStatusEntry | |||
| mscAppnRtpRowStatus | 1.3.6.1.4.1.562.36.2.1.110.13.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnRtp components. These components cannot be added nor deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnRtpComponentName | 1.3.6.1.4.1.562.36.2.1.110.13.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnRtpStorageType | 1.3.6.1.4.1.562.36.2.1.110.13.1.1.4 | ||
| This variable represents the storage type value for the mscAppnRtp tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnRtpIndex | 1.3.6.1.4.1.562.36.2.1.110.13.1.1.10 | ||
| This variable represents the index for the mscAppnRtp tables. | |||
| OBJECT-TYPE | |||
| AsciiStringIndex | SIZE(1..8) | ||
| mscAppnRtpOperTable | 1.3.6.1.4.1.562.36.2.1.110.13.10 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational data for the High Performance Routing-Rapid Transport Protocol pipe | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnRtpOperEntry | |||
| mscAppnRtpOperEntry | 1.3.6.1.4.1.562.36.2.1.110.13.10.1 | ||
| An entry in the mscAppnRtpOperTable. | |||
| OBJECT-TYPE | |||
| MscAppnRtpOperEntry | |||
| mscAppnRtpLocalLsName | 1.3.6.1.4.1.562.36.2.1.110.13.10.1.1 | ||
| This is the name of the local link station associated with this High Performance Routing-Rapid Transport Protocol pipe | |||
| OBJECT-TYPE | |||
| AsciiString | SIZE(1..8) | ||
| mscAppnRtpRemoteCpName | 1.3.6.1.4.1.562.36.2.1.110.13.10.1.2 | ||
| This is the CP name of the node at the other end of the High Performance Routing-Rapid Transport Protocol pipe | |||
| OBJECT-TYPE | |||
| AsciiString | SIZE(1..17) | ||
| mscAppnRtpCosName | 1.3.6.1.4.1.562.36.2.1.110.13.10.1.3 | ||
| This is the name of the Class of Service associated with this High Performance Routing-Rapid Transport Protocol pipe | |||
| OBJECT-TYPE | |||
| AsciiString | SIZE(1..8) | ||
| mscAppnRtpActiveSessions | 1.3.6.1.4.1.562.36.2.1.110.13.10.1.4 | ||
| The number of active sessions using this High Performance Routing-Rapid Transport Protocol pipe | |||
| OBJECT-TYPE | |||
| INTEGER | 0..32767 | ||
| mscAppnRtpLocalTcid | 1.3.6.1.4.1.562.36.2.1.110.13.10.1.5 | ||
| The Transport Connection Identifier (TCID) assigned to this HPR RTP pipe by the local node | |||
| OBJECT-TYPE | |||
| HexString | SIZE(8) | ||
| mscAppnRtpRemoteTcid | 1.3.6.1.4.1.562.36.2.1.110.13.10.1.6 | ||
| The Transport Connection Identifier (TCID) assigned to this HPR RTP pipe by the remote node. | |||
| OBJECT-TYPE | |||
| HexString | SIZE(8) | ||
| mscAppnRtpIdleTimer | 1.3.6.1.4.1.562.36.2.1.110.13.10.1.7 | ||
| The idle timer of this High Performance Routing-Rapid Transport Protocol pipe (in seconds) | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..4294967295 | ||
| mscAppnRtpMaxBtuSize | 1.3.6.1.4.1.562.36.2.1.110.13.10.1.8 | ||
| The maximum BTU size (the length of the information field in a frame) of the High Performance Routing-Rapid Transport Protocol pipe. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..32767 | ||
| mscAppnRtpStatsTable | 1.3.6.1.4.1.562.36.2.1.110.13.11 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the statistics and counters for the High Performance Routing-Rapid Transport Protocol pipe. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnRtpStatsEntry | |||
| mscAppnRtpStatsEntry | 1.3.6.1.4.1.562.36.2.1.110.13.11.1 | ||
| An entry in the mscAppnRtpStatsTable. | |||
| OBJECT-TYPE | |||
| MscAppnRtpStatsEntry | |||
| mscAppnRtpTxBytes | 1.3.6.1.4.1.562.36.2.1.110.13.11.1.1 | ||
| This attribute is the total number of bytes sent on this High Performance Routing-Rapid Transport Protocol pipe. This counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnRtpRxBytes | 1.3.6.1.4.1.562.36.2.1.110.13.11.1.2 | ||
| This attribute is the total number of bytes received on this High Performance Routing-Rapid Transport Protocol pipe. This counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnRtpBytesResent | 1.3.6.1.4.1.562.36.2.1.110.13.11.1.3 | ||
| This attribute counts the total number of bytes resent on this High Performance Routing-Rapid Transport Protocol pipe. This counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnRtpBytesDiscarded | 1.3.6.1.4.1.562.36.2.1.110.13.11.1.4 | ||
| This attribute counts the total number of bytes discarded on this High Performance Routing-Rapid Transport Protocol pipe. High numbers of discarded bytes may indicate a problem in the APPN network. This counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnRtpPktTx | 1.3.6.1.4.1.562.36.2.1.110.13.11.1.5 | ||
| This attribute counts the total number of packets sent on this High Performance Routing-Rapid Transport Protocol pipe. This counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnRtpPktRx | 1.3.6.1.4.1.562.36.2.1.110.13.11.1.6 | ||
| This attribute counts the total number of packets received on this High Performance Routing-Rapid Transport Protocol pipe. This counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnRtpPktResent | 1.3.6.1.4.1.562.36.2.1.110.13.11.1.7 | ||
| This attribute counts the total number of packets resent on this High Performance Routing-Rapid Transport Protocol pipe. This counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnRtpPktDiscard | 1.3.6.1.4.1.562.36.2.1.110.13.11.1.8 | ||
| This attribute counts the total number of packets discarded on this High Performance Routing-Rapid Transport Protocol pipe. Large numbers of discarded packets may indicate a problem in the APPN network. This counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnRtpLostFrames | 1.3.6.1.4.1.562.36.2.1.110.13.11.1.9 | ||
| This attribute counts the number of lost frames detected on this pipe. Excessive numbers of lost frames may indicate a problem in the APPN network. This counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnRtpCurTxRate | 1.3.6.1.4.1.562.36.2.1.110.13.11.1.10 | ||
| This attribute gives the current send rate on this pipe. | |||
| OBJECT-TYPE | |||
| Gauge32 | 0..4294967295 | ||
| mscAppnRtpMaxTxRate | 1.3.6.1.4.1.562.36.2.1.110.13.11.1.11 | ||
| This attribute give the maximum send rate on this pipe. | |||
| OBJECT-TYPE | |||
| Gauge32 | 0..4294967295 | ||
| mscAppnRtpMinTxRate | 1.3.6.1.4.1.562.36.2.1.110.13.11.1.12 | ||
| This attribute gives the minimum send rate on this pipe. | |||
| OBJECT-TYPE | |||
| Gauge32 | 0..4294967295 | ||
| mscAppnRtpCurRxRate | 1.3.6.1.4.1.562.36.2.1.110.13.11.1.13 | ||
| This attribute gives the current receive rate on this pipe. | |||
| OBJECT-TYPE | |||
| Gauge32 | 0..4294967295 | ||
| mscAppnRtpMaxRxRate | 1.3.6.1.4.1.562.36.2.1.110.13.11.1.14 | ||
| This attribute gives the maximum receive rate on this pipe. | |||
| OBJECT-TYPE | |||
| Gauge32 | 0..4294967295 | ||
| mscAppnRtpMinRxRate | 1.3.6.1.4.1.562.36.2.1.110.13.11.1.15 | ||
| This attribute gives the minimum receive rate on this pipe. | |||
| OBJECT-TYPE | |||
| Gauge32 | 0..4294967295 | ||
| mscAppnRtpBurstSize | 1.3.6.1.4.1.562.36.2.1.110.13.11.1.16 | ||
| This attribute gives the current burst size on this pipe. | |||
| OBJECT-TYPE | |||
| Gauge32 | 0..4294967295 | ||
| mscAppnRtpUptime | 1.3.6.1.4.1.562.36.2.1.110.13.11.1.17 | ||
| This attribute gives the total uptime of this High Performance Routing-Rapid Transport Protocol pipe. | |||
| OBJECT-TYPE | |||
| TimeTicks | |||
| mscAppnRtpSmoothRoundTripTime | 1.3.6.1.4.1.562.36.2.1.110.13.11.1.18 | ||
| This attribute gives the smoothed round-trip time on this pipe. | |||
| OBJECT-TYPE | |||
| Gauge32 | 0..4294967295 | ||
| mscAppnRtpLastRoundTripTime | 1.3.6.1.4.1.562.36.2.1.110.13.11.1.19 | ||
| This attribute gives the last round-trip time on this pipe. | |||
| OBJECT-TYPE | |||
| Gauge32 | 0..4294967295 | ||
| mscAppnRtpShortReqTimer | 1.3.6.1.4.1.562.36.2.1.110.13.11.1.20 | ||
| This attribute gives the short request timer duration on this pipe. | |||
| OBJECT-TYPE | |||
| Gauge32 | 0..4294967295 | ||
| mscAppnRtpShortReqTimeouts | 1.3.6.1.4.1.562.36.2.1.110.13.11.1.21 | ||
| This attribute counts the number of short request timer timeouts on this pipe. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnRtpIdleTimeouts | 1.3.6.1.4.1.562.36.2.1.110.13.11.1.22 | ||
| This attribute count the number of idle timer timeouts on this pipe. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnRtpRxInvalidSnaFrames | 1.3.6.1.4.1.562.36.2.1.110.13.11.1.23 | ||
| This attribute counts the number of invalid SNA frames received on this pipe. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnRtpInSessionControlFrames | 1.3.6.1.4.1.562.36.2.1.110.13.11.1.24 | ||
| This attribute counts the number of Session Control frames received on this pipe. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnRtpOutSessionControlFrames | 1.3.6.1.4.1.562.36.2.1.110.13.11.1.25 | ||
| This attribute counts the number of Session Control frames sent on this pipe. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDlu | 1.3.6.1.4.1.562.36.2.1.110.14 | ||
| OBJECT IDENTIFIER | |||
| mscAppnDluRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.14.1 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscAppnDlu components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDluRowStatusEntry | |||
| mscAppnDluRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.14.1.1 | ||
| A single entry in the table represents a single mscAppnDlu component. | |||
| OBJECT-TYPE | |||
| MscAppnDluRowStatusEntry | |||
| mscAppnDluRowStatus | 1.3.6.1.4.1.562.36.2.1.110.14.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnDlu components. These components cannot be added nor deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnDluComponentName | 1.3.6.1.4.1.562.36.2.1.110.14.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnDluStorageType | 1.3.6.1.4.1.562.36.2.1.110.14.1.1.4 | ||
| This variable represents the storage type value for the mscAppnDlu tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnDluIndex | 1.3.6.1.4.1.562.36.2.1.110.14.1.1.10 | ||
| This variable represents the index for the mscAppnDlu tables. | |||
| OBJECT-TYPE | |||
| AsciiStringIndex | SIZE(1..8) | ||
| mscAppnDluOperTable | 1.3.6.1.4.1.562.36.2.1.110.14.10 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** The group contains the operational data for a dependent LU session. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDluOperEntry | |||
| mscAppnDluOperEntry | 1.3.6.1.4.1.562.36.2.1.110.14.10.1 | ||
| An entry in the mscAppnDluOperTable. | |||
| OBJECT-TYPE | |||
| MscAppnDluOperEntry | |||
| mscAppnDluSscpSessActive | 1.3.6.1.4.1.562.36.2.1.110.14.10.1.1 | ||
| This attribute tells whether the SSCP-LU session is active | |||
| OBJECT-TYPE | |||
| INTEGER | inactive(0), active(1) | ||
| mscAppnDluPluSessActive | 1.3.6.1.4.1.562.36.2.1.110.14.10.1.2 | ||
| This attribute tells whether the dependent LU session is active. | |||
| OBJECT-TYPE | |||
| INTEGER | inactive(0), active(1) | ||
| mscAppnDluDlusName | 1.3.6.1.4.1.562.36.2.1.110.14.10.1.3 | ||
| This attribute tells the name of the dependent LU server name that this dependent LU is connected to. | |||
| OBJECT-TYPE | |||
| AsciiString | SIZE(0..17) | ||
| mscAppnDluPluName | 1.3.6.1.4.1.562.36.2.1.110.14.10.1.4 | ||
| This attribute tells the partner LU name of this dependent LU if the LU is connected, it is a NULL string if the dependent LU does not have an active session with a partner LU. | |||
| OBJECT-TYPE | |||
| AsciiString | SIZE(0..17) | ||
| mscAppnDluNauAddress | 1.3.6.1.4.1.562.36.2.1.110.14.10.1.5 | ||
| This attribute gives the NAU address of the dependent LU. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| mscAppnDluSscp | 1.3.6.1.4.1.562.36.2.1.110.14.100 | ||
| OBJECT IDENTIFIER | |||
| mscAppnDluSscpRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.14.100.1 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscAppnDluSscp components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDluSscpRowStatusEntry | |||
| mscAppnDluSscpRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.14.100.1.1 | ||
| A single entry in the table represents a single mscAppnDluSscp component. | |||
| OBJECT-TYPE | |||
| MscAppnDluSscpRowStatusEntry | |||
| mscAppnDluSscpRowStatus | 1.3.6.1.4.1.562.36.2.1.110.14.100.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnDluSscp components. These components cannot be added nor deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnDluSscpComponentName | 1.3.6.1.4.1.562.36.2.1.110.14.100.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnDluSscpStorageType | 1.3.6.1.4.1.562.36.2.1.110.14.100.1.1.4 | ||
| This variable represents the storage type value for the mscAppnDluSscp tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnDluSscpIndex | 1.3.6.1.4.1.562.36.2.1.110.14.100.1.1.10 | ||
| This variable represents the index for the mscAppnDluSscp tables. | |||
| OBJECT-TYPE | |||
| NonReplicated | |||
| mscAppnDluSscpStatsTable | 1.3.6.1.4.1.562.36.2.1.110.14.100.10 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This component contains counters and statistics for a session. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDluSscpStatsEntry | |||
| mscAppnDluSscpStatsEntry | 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1 | ||
| An entry in the mscAppnDluSscpStatsTable. | |||
| OBJECT-TYPE | |||
| MscAppnDluSscpStatsEntry | |||
| mscAppnDluSscpRxRuSize | 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.1 | ||
| This is the maximum request unit (RU) size that can be used on the session. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| mscAppnDluSscpMaxTxBtuSize | 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.2 | ||
| This is the maximum BTU size (length of the information field in a frame) that can be sent on the session. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| mscAppnDluSscpMaxRxBtuSize | 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.3 | ||
| This is the maximum BTU size (length of the information field in a frame) that can be received on the session. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| mscAppnDluSscpMaxTxPacWin | 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.4 | ||
| This is the maximum size of the send pacing window on the session. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..32767 | ||
| mscAppnDluSscpCurTxPacWin | 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.5 | ||
| This is the current size of the send pacing window on the session. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..32767 | ||
| mscAppnDluSscpMaxRxPacWin | 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.6 | ||
| This is the maximum size of the receive pacing window on the session. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..32767 | ||
| mscAppnDluSscpCurRxPacWin | 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.7 | ||
| This is the current size of the receive pacing window on the session. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..32767 | ||
| mscAppnDluSscpTxDataframes | 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.8 | ||
| This attribute counts the number of normal flow data frames sent on the session, the counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDluSscpTxFmdFrames | 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.9 | ||
| This attribute counts the number of FMD data frames sent on the session, the counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDluSscpTxDataBytes | 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.10 | ||
| This is the number of normal flow data bytes sent on the session, the counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDluSscpRxDataFrames | 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.11 | ||
| This is the number of normal flow data frames received on the session, the counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDluSscpRxFmdFrames | 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.12 | ||
| This attribute counts the number of FMD data frames received on the session, the counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDluSscpRxDataBytes | 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.13 | ||
| This is the number of normal flow data bytes received on the session, the counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDluSscpSidh | 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.14 | ||
| This attribute contains the session identifier high byte on the session. | |||
| OBJECT-TYPE | |||
| Hex | 0..255 | ||
| mscAppnDluSscpSidl | 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.15 | ||
| This attribute contains the session ID low byte on the SSCP session. | |||
| OBJECT-TYPE | |||
| Hex | 0..255 | ||
| mscAppnDluSscpOdai | 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.16 | ||
| This is the origin destination assignor indicator (ODAI) on the session. | |||
| OBJECT-TYPE | |||
| INTEGER | primary(0), secondary(1) | ||
| mscAppnDluSscpLsName | 1.3.6.1.4.1.562.36.2.1.110.14.100.10.1.17 | ||
| This is the link station name associated with these counters and statistics. This is an 8 character name of the link station over which the data flowed. This field can be used to correlate the session statistics with the link over which session data flows. | |||
| OBJECT-TYPE | |||
| AsciiString | SIZE(1..8) | ||
| mscAppnDluUsStat | 1.3.6.1.4.1.562.36.2.1.110.14.101 | ||
| OBJECT IDENTIFIER | |||
| mscAppnDluUsStatRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.14.101.1 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscAppnDluUsStat components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDluUsStatRowStatusEntry | |||
| mscAppnDluUsStatRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.14.101.1.1 | ||
| A single entry in the table represents a single mscAppnDluUsStat component. | |||
| OBJECT-TYPE | |||
| MscAppnDluUsStatRowStatusEntry | |||
| mscAppnDluUsStatRowStatus | 1.3.6.1.4.1.562.36.2.1.110.14.101.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnDluUsStat components. These components cannot be added nor deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnDluUsStatComponentName | 1.3.6.1.4.1.562.36.2.1.110.14.101.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnDluUsStatStorageType | 1.3.6.1.4.1.562.36.2.1.110.14.101.1.1.4 | ||
| This variable represents the storage type value for the mscAppnDluUsStat tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnDluUsStatIndex | 1.3.6.1.4.1.562.36.2.1.110.14.101.1.1.10 | ||
| This variable represents the index for the mscAppnDluUsStat tables. | |||
| OBJECT-TYPE | |||
| NonReplicated | |||
| mscAppnDluUsStatStatsTable | 1.3.6.1.4.1.562.36.2.1.110.14.101.10 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This component contains counters and statistics for a session. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDluUsStatStatsEntry | |||
| mscAppnDluUsStatStatsEntry | 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1 | ||
| An entry in the mscAppnDluUsStatStatsTable. | |||
| OBJECT-TYPE | |||
| MscAppnDluUsStatStatsEntry | |||
| mscAppnDluUsStatRxRuSize | 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.1 | ||
| This is the maximum request unit (RU) size that can be used on the session. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| mscAppnDluUsStatMaxTxBtuSize | 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.2 | ||
| This is the maximum BTU size (length of the information field in a frame) that can be sent on the session. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| mscAppnDluUsStatMaxRxBtuSize | 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.3 | ||
| This is the maximum BTU size (length of the information field in a frame) that can be received on the session. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| mscAppnDluUsStatMaxTxPacWin | 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.4 | ||
| This is the maximum size of the send pacing window on the session. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..32767 | ||
| mscAppnDluUsStatCurTxPacWin | 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.5 | ||
| This is the current size of the send pacing window on the session. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..32767 | ||
| mscAppnDluUsStatMaxRxPacWin | 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.6 | ||
| This is the maximum size of the receive pacing window on the session. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..32767 | ||
| mscAppnDluUsStatCurRxPacWin | 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.7 | ||
| This is the current size of the receive pacing window on the session. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..32767 | ||
| mscAppnDluUsStatTxDataframes | 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.8 | ||
| This attribute counts the number of normal flow data frames sent on the session, the counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDluUsStatTxFmdFrames | 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.9 | ||
| This attribute counts the number of FMD data frames sent on the session, the counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDluUsStatTxDataBytes | 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.10 | ||
| This is the number of normal flow data bytes sent on the session, the counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDluUsStatRxDataFrames | 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.11 | ||
| This is the number of normal flow data frames received on the session, the counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDluUsStatRxFmdFrames | 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.12 | ||
| This attribute counts the number of FMD data frames received on the session, the counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDluUsStatRxDataBytes | 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.13 | ||
| This is the number of normal flow data bytes received on the session, the counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDluUsStatSidh | 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.14 | ||
| This attribute contains the session identifier high byte on the session. | |||
| OBJECT-TYPE | |||
| Hex | 0..255 | ||
| mscAppnDluUsStatSidl | 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.15 | ||
| This attribute contains the session ID low byte on the SSCP session. | |||
| OBJECT-TYPE | |||
| Hex | 0..255 | ||
| mscAppnDluUsStatOdai | 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.16 | ||
| This is the origin destination assignor indicator (ODAI) on the session. | |||
| OBJECT-TYPE | |||
| INTEGER | primary(0), secondary(1) | ||
| mscAppnDluUsStatLsName | 1.3.6.1.4.1.562.36.2.1.110.14.101.10.1.17 | ||
| This is the link station name associated with these counters and statistics. This is an 8 character name of the link station over which the data flowed. This field can be used to correlate the session statistics with the link over which session data flows. | |||
| OBJECT-TYPE | |||
| AsciiString | SIZE(1..8) | ||
| mscAppnDluDsStat | 1.3.6.1.4.1.562.36.2.1.110.14.102 | ||
| OBJECT IDENTIFIER | |||
| mscAppnDluDsStatRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.14.102.1 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscAppnDluDsStat components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDluDsStatRowStatusEntry | |||
| mscAppnDluDsStatRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.14.102.1.1 | ||
| A single entry in the table represents a single mscAppnDluDsStat component. | |||
| OBJECT-TYPE | |||
| MscAppnDluDsStatRowStatusEntry | |||
| mscAppnDluDsStatRowStatus | 1.3.6.1.4.1.562.36.2.1.110.14.102.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnDluDsStat components. These components cannot be added nor deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnDluDsStatComponentName | 1.3.6.1.4.1.562.36.2.1.110.14.102.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnDluDsStatStorageType | 1.3.6.1.4.1.562.36.2.1.110.14.102.1.1.4 | ||
| This variable represents the storage type value for the mscAppnDluDsStat tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnDluDsStatIndex | 1.3.6.1.4.1.562.36.2.1.110.14.102.1.1.10 | ||
| This variable represents the index for the mscAppnDluDsStat tables. | |||
| OBJECT-TYPE | |||
| NonReplicated | |||
| mscAppnDluDsStatStatsTable | 1.3.6.1.4.1.562.36.2.1.110.14.102.10 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This component contains counters and statistics for a session. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDluDsStatStatsEntry | |||
| mscAppnDluDsStatStatsEntry | 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1 | ||
| An entry in the mscAppnDluDsStatStatsTable. | |||
| OBJECT-TYPE | |||
| MscAppnDluDsStatStatsEntry | |||
| mscAppnDluDsStatRxRuSize | 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.1 | ||
| This is the maximum request unit (RU) size that can be used on the session. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| mscAppnDluDsStatMaxTxBtuSize | 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.2 | ||
| This is the maximum BTU size (length of the information field in a frame) that can be sent on the session. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| mscAppnDluDsStatMaxRxBtuSize | 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.3 | ||
| This is the maximum BTU size (length of the information field in a frame) that can be received on the session. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| mscAppnDluDsStatMaxTxPacWin | 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.4 | ||
| This is the maximum size of the send pacing window on the session. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..32767 | ||
| mscAppnDluDsStatCurTxPacWin | 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.5 | ||
| This is the current size of the send pacing window on the session. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..32767 | ||
| mscAppnDluDsStatMaxRxPacWin | 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.6 | ||
| This is the maximum size of the receive pacing window on the session. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..32767 | ||
| mscAppnDluDsStatCurRxPacWin | 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.7 | ||
| This is the current size of the receive pacing window on the session. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..32767 | ||
| mscAppnDluDsStatTxDataframes | 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.8 | ||
| This attribute counts the number of normal flow data frames sent on the session, the counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDluDsStatTxFmdFrames | 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.9 | ||
| This attribute counts the number of FMD data frames sent on the session, the counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDluDsStatTxDataBytes | 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.10 | ||
| This is the number of normal flow data bytes sent on the session, the counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDluDsStatRxDataFrames | 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.11 | ||
| This is the number of normal flow data frames received on the session, the counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDluDsStatRxFmdFrames | 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.12 | ||
| This attribute counts the number of FMD data frames received on the session, the counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDluDsStatRxDataBytes | 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.13 | ||
| This is the number of normal flow data bytes received on the session, the counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDluDsStatSidh | 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.14 | ||
| This attribute contains the session identifier high byte on the session. | |||
| OBJECT-TYPE | |||
| Hex | 0..255 | ||
| mscAppnDluDsStatSidl | 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.15 | ||
| This attribute contains the session ID low byte on the SSCP session. | |||
| OBJECT-TYPE | |||
| Hex | 0..255 | ||
| mscAppnDluDsStatOdai | 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.16 | ||
| This is the origin destination assignor indicator (ODAI) on the session. | |||
| OBJECT-TYPE | |||
| INTEGER | primary(0), secondary(1) | ||
| mscAppnDluDsStatLsName | 1.3.6.1.4.1.562.36.2.1.110.14.102.10.1.17 | ||
| This is the link station name associated with these counters and statistics. This is an 8 character name of the link station over which the data flowed. This field can be used to correlate the session statistics with the link over which session data flows. | |||
| OBJECT-TYPE | |||
| AsciiString | SIZE(1..8) | ||
| mscAppnDlus | 1.3.6.1.4.1.562.36.2.1.110.15 | ||
| OBJECT IDENTIFIER | |||
| mscAppnDlusRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.15.1 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscAppnDlus components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDlusRowStatusEntry | |||
| mscAppnDlusRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.15.1.1 | ||
| A single entry in the table represents a single mscAppnDlus component. | |||
| OBJECT-TYPE | |||
| MscAppnDlusRowStatusEntry | |||
| mscAppnDlusRowStatus | 1.3.6.1.4.1.562.36.2.1.110.15.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnDlus components. These components cannot be added nor deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnDlusComponentName | 1.3.6.1.4.1.562.36.2.1.110.15.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnDlusStorageType | 1.3.6.1.4.1.562.36.2.1.110.15.1.1.4 | ||
| This variable represents the storage type value for the mscAppnDlus tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnDlusIndex | 1.3.6.1.4.1.562.36.2.1.110.15.1.1.10 | ||
| This variable represents the index for the mscAppnDlus tables. | |||
| OBJECT-TYPE | |||
| AsciiStringIndex | SIZE(1..17) | ||
| mscAppnDlusOperTable | 1.3.6.1.4.1.562.36.2.1.110.15.10 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Information on the DLUR-DLUS pipe. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDlusOperEntry | |||
| mscAppnDlusOperEntry | 1.3.6.1.4.1.562.36.2.1.110.15.10.1 | ||
| An entry in the mscAppnDlusOperTable. | |||
| OBJECT-TYPE | |||
| MscAppnDlusOperEntry | |||
| mscAppnDlusPrimaryDlus | 1.3.6.1.4.1.562.36.2.1.110.15.10.1.1 | ||
| This attribute indicates if this is the pipe to the primary default dependent LU server. | |||
| OBJECT-TYPE | |||
| INTEGER | no(0), yes(1) | ||
| mscAppnDlusPipeState | 1.3.6.1.4.1.562.36.2.1.110.15.10.1.2 | ||
| This attribute indicates the current state of the DLUR-DLUS pipe. inactive indicates the pipe is not connected (the session has likely failed), pendingActive indicates the pipe is connecting, active indicates the pipe is currently connected and data is flowing, and pendingInactive indicates the pipe is being disconnected. | |||
| OBJECT-TYPE | |||
| INTEGER | inactive(0), pendingActive(1), active(2), pendingInactive(3) | ||
| mscAppnDlusActivePUs | 1.3.6.1.4.1.562.36.2.1.110.15.10.1.3 | ||
| This attribute indicates the number of active physical units using the pipe. | |||
| OBJECT-TYPE | |||
| Gauge32 | 0..32767 | ||
| mscAppnDlusDlusStatTable | 1.3.6.1.4.1.562.36.2.1.110.15.11 | ||
| *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the counters and statistics for the DLUR-DLUS pipe | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDlusDlusStatEntry | |||
| mscAppnDlusDlusStatEntry | 1.3.6.1.4.1.562.36.2.1.110.15.11.1 | ||
| An entry in the mscAppnDlusDlusStatTable. | |||
| OBJECT-TYPE | |||
| MscAppnDlusDlusStatEntry | |||
| mscAppnDlusReqActPuTx | 1.3.6.1.4.1.562.36.2.1.110.15.11.1.1 | ||
| This attribute counts the number of REQACTPUs sent to the DLUS. The counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDlusReqActPuRspRx | 1.3.6.1.4.1.562.36.2.1.110.15.11.1.2 | ||
| This attribute counts the number of REQACTPU responses received from the DLUS. The counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDlusActPuRx | 1.3.6.1.4.1.562.36.2.1.110.15.11.1.3 | ||
| This attributes counts the number of ACTPUs received from the DLUS. The counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDlusActPuRspTx | 1.3.6.1.4.1.562.36.2.1.110.15.11.1.4 | ||
| This attribute counts the number of ACTPU responses sent to the DLUS. The counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDlusReqDactPuTx | 1.3.6.1.4.1.562.36.2.1.110.15.11.1.5 | ||
| This attribute counts the number of REQDACTPUs sent to the DLUS. The counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDlusReqDactPuRspRx | 1.3.6.1.4.1.562.36.2.1.110.15.11.1.6 | ||
| This attribute counts the number of REQDACTPU responses received from the DLUS. The counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDlusDactPuRx | 1.3.6.1.4.1.562.36.2.1.110.15.11.1.7 | ||
| This attribute counts the number of DACTPUs received from the DLUS. The counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDlusDactPuRspTx | 1.3.6.1.4.1.562.36.2.1.110.15.11.1.8 | ||
| This attribute counts the number of DACTPU responses received from the DLUS. The counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDlusActLuRx | 1.3.6.1.4.1.562.36.2.1.110.15.11.1.9 | ||
| This attribute counts the number of ACTLUs received from the DLUS. The counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDlusActLuRspTx | 1.3.6.1.4.1.562.36.2.1.110.15.11.1.10 | ||
| This attribute counts the number of ACTLU responses sent to the DLUS. The counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDlusDactLuRx | 1.3.6.1.4.1.562.36.2.1.110.15.11.1.11 | ||
| This attribute counts the number of DACTLUs received from the DLUS. The counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDlusDactLuRspTx | 1.3.6.1.4.1.562.36.2.1.110.15.11.1.12 | ||
| This attribute counts the number of DACTLU responses sent to the DLUS. The counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDlusSscpPuMuRx | 1.3.6.1.4.1.562.36.2.1.110.15.11.1.13 | ||
| This attribute counts the number of SSCP-PU MUs received. The counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDlusSscpPuMuTx | 1.3.6.1.4.1.562.36.2.1.110.15.11.1.14 | ||
| This attribute counts the number of SSCP-PU MUs sent. The counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDlusSscpLuMuRx | 1.3.6.1.4.1.562.36.2.1.110.15.11.1.15 | ||
| This attributes counts the number of SSCP-LU MUs received. The counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDlusSscpLuMuTx | 1.3.6.1.4.1.562.36.2.1.110.15.11.1.16 | ||
| This attributes counts the number of SSCP-LU MUs sent. The counter wraps to zero. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDLUR | 1.3.6.1.4.1.562.36.2.1.110.16 | ||
| OBJECT IDENTIFIER | |||
| mscAppnDLURRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.16.1 | ||
| This entry controls the addition and deletion of mscAppnDLUR components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDLURRowStatusEntry | |||
| mscAppnDLURRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.16.1.1 | ||
| A single entry in the table represents a single mscAppnDLUR component. | |||
| OBJECT-TYPE | |||
| MscAppnDLURRowStatusEntry | |||
| mscAppnDLURRowStatus | 1.3.6.1.4.1.562.36.2.1.110.16.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnDLUR components. These components can be added and deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnDLURComponentName | 1.3.6.1.4.1.562.36.2.1.110.16.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnDLURStorageType | 1.3.6.1.4.1.562.36.2.1.110.16.1.1.4 | ||
| This variable represents the storage type value for the mscAppnDLUR tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnDLURIndex | 1.3.6.1.4.1.562.36.2.1.110.16.1.1.10 | ||
| This variable represents the index for the mscAppnDLUR tables. | |||
| OBJECT-TYPE | |||
| NonReplicated | |||
| mscAppnDLURDlurParmsTable | 1.3.6.1.4.1.562.36.2.1.110.16.2 | ||
| These parameters define the dependent LU requester options. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnDLURDlurParmsEntry | |||
| mscAppnDLURDlurParmsEntry | 1.3.6.1.4.1.562.36.2.1.110.16.2.1 | ||
| An entry in the mscAppnDLURDlurParmsTable. | |||
| OBJECT-TYPE | |||
| MscAppnDLURDlurParmsEntry | |||
| mscAppnDLURPrimaryDefDlusName | 1.3.6.1.4.1.562.36.2.1.110.16.2.1.2 | ||
| The fully qualified CP name of the node that will serve as the primary dependent LU server (DLUS). | |||
| OBJECT-TYPE | |||
| AsciiString | SIZE(3..17) | ||
| mscAppnDLURSecondaryDefDlusName | 1.3.6.1.4.1.562.36.2.1.110.16.2.1.3 | ||
| The fully qualified CP name of the node that will serve as the backup or secondary dependent LU server (DLUS). | |||
| OBJECT-TYPE | |||
| AsciiString | SIZE(0..17) | ||
| mscAppnDLURDlusRetryTimeout | 1.3.6.1.4.1.562.36.2.1.110.16.2.1.4 | ||
| This attribute specifies the time in seconds before a network search to locate a DLUS times out. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 1..65535 | ||
| mscAppnDLURDlusRetryLimit | 1.3.6.1.4.1.562.36.2.1.110.16.2.1.5 | ||
| This attribute specifies the maximum number of retry attempts that will be made after an initial failure to contact a DLUS. If zero is specifed, APPN will retry indefinitely. When this limit has been reached, downstream PUs that are connected to APPN will be sent a QDISC frame. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| mscAppnCos | 1.3.6.1.4.1.562.36.2.1.110.17 | ||
| OBJECT IDENTIFIER | |||
| mscAppnCosRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.17.1 | ||
| This entry controls the addition and deletion of mscAppnCos components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnCosRowStatusEntry | |||
| mscAppnCosRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.17.1.1 | ||
| A single entry in the table represents a single mscAppnCos component. | |||
| OBJECT-TYPE | |||
| MscAppnCosRowStatusEntry | |||
| mscAppnCosRowStatus | 1.3.6.1.4.1.562.36.2.1.110.17.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnCos components. These components can be added and deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnCosComponentName | 1.3.6.1.4.1.562.36.2.1.110.17.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnCosStorageType | 1.3.6.1.4.1.562.36.2.1.110.17.1.1.4 | ||
| This variable represents the storage type value for the mscAppnCos tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnCosIndex | 1.3.6.1.4.1.562.36.2.1.110.17.1.1.10 | ||
| This variable represents the index for the mscAppnCos tables. | |||
| OBJECT-TYPE | |||
| AsciiStringIndex | SIZE(1..8) | ||
| mscAppnCosTg | 1.3.6.1.4.1.562.36.2.1.110.17.10 | ||
| OBJECT IDENTIFIER | |||
| mscAppnCosTgRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.17.10.1 | ||
| This entry controls the addition and deletion of mscAppnCosTg components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnCosTgRowStatusEntry | |||
| mscAppnCosTgRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.17.10.1.1 | ||
| A single entry in the table represents a single mscAppnCosTg component. | |||
| OBJECT-TYPE | |||
| MscAppnCosTgRowStatusEntry | |||
| mscAppnCosTgRowStatus | 1.3.6.1.4.1.562.36.2.1.110.17.10.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnCosTg components. These components can be added and deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnCosTgComponentName | 1.3.6.1.4.1.562.36.2.1.110.17.10.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnCosTgStorageType | 1.3.6.1.4.1.562.36.2.1.110.17.10.1.1.4 | ||
| This variable represents the storage type value for the mscAppnCosTg tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnCosTgIndex | 1.3.6.1.4.1.562.36.2.1.110.17.10.1.1.10 | ||
| This variable represents the index for the mscAppnCosTg tables. | |||
| OBJECT-TYPE | |||
| Integer32 | 1..255 | ||
| mscAppnCosTgProvTable | 1.3.6.1.4.1.562.36.2.1.110.17.10.10 | ||
| This group specifies a range of TG characteristics for a class of service and is used in route selection for session traffic. During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnCosTgProvEntry | |||
| mscAppnCosTgProvEntry | 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1 | ||
| An entry in the mscAppnCosTgProvTable. | |||
| OBJECT-TYPE | |||
| MscAppnCosTgProvEntry | |||
| mscAppnCosTgMinEffectiveCapacity | 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.1 | ||
| During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the minimum acceptable speed for a TG using this Class of Service. | |||
| OBJECT-TYPE | |||
| INTEGER | min(0), n170bps(1), n190bps(2), n210bps(3), n230bps(4), n240bps(5), n260bps(6), n280bps(7), n300bps(8), n340bps(9), n380bps(10), n410bps(11), n450bps(12), n490bps(13), n530bps(14), n560bps(15), n600bps(16), n680bps(17), n750bps(18), n830bps(19), n900bps(20), n980bps(21), n1050bps(22), n1130bps(23), n1200bps(24), n1350bps(25), n1500bps(26), n1700bps(27), n1800bps(28), n2000bps(29), n2100bps(30), n2300bps(31), n2400bps(32), n2700bps(33), n3000bps(34), n3300bps(35), n3600bps(36), n3900bps(37), n4200bps(38), n4500bps(39), n4800bps(40), n5400bps(41), n6000bps(42), n6600bps(43), n7200bps(44), n7800bps(45), n8400bps(46), n9000bps(47), n9600bps(48), n10800bps(49), n12000bps(50), n13200bps(51), n14400bps(52), n15600bps(53), n17kbps(54), n18kbps(55), n19kbps(56), n22kbps(57), n24kbps(58), n26kbps(59), n29kbps(60), n31kbps(61), n34kbps(62), n36kbps(63), n38kbps(64), n43kbps(65), n48kbps(66), n53kbps(67), n58kbps(68), n62kbps(69), n67kbps(70), n72kbps(71), n77kbps(72), n86kbps(73), n96kbps(74), n106kbps(75), n115kbps(76), n125kbps(77), n134kbps(78), n144kbps(79), n154kbps(80), n170kbps(81), n190kbps(82), n210kbps(83), n230kbps(84), n250kbps(85), n270kbps(86), n290kbps(87), n310kbps(88), n350kbps(89), n380kbps(90), n420kbps(91), n460kbps(92), n500kbps(93), n540kbps(94), n580kbps(95), n610kbps(96), n690kbps(97), n770kbps(98), n840kbps(99), n920kbps(100), n1000kbps(101), n1080kbps(102), n1150kbps(103), n1230kbps(104), n1380kbps(105), n1540kbps(106), n1700kbps(107), n1800kbps(108), n2000kbps(109), n2200kbps(110), n2300kbps(111), n2500kbps(112), n2800kbps(113), n3100kbps(114), n3400kbps(115), n3700kbps(116), n4000kbps(117), n4300kbps(118), n4600kbps(119), n4900kbps(120), n5500kbps(121), n6100kbps(122), n6800kbps(123), n7400kbps(124), n8000kbps(125), n8600kbps(126), n9200kbps(127), n9800kbps(128), n11100kbps(129), n12300kbps(130), n13500kbps(131), n14700kbps(132), n16Mbps(133), n17Mbps(134), n18Mbps(135), n20Mbps(136), n22Mbps(137), n25Mbps(138), n27Mbps(139), n29Mbps(140), n32Mbps(141), n34Mbps(142), n37Mbps(143), n39Mbps(144), n44Mbps(145), n49Mbps(146), n54Mbps(147), n59Mbps(148), n64Mbps(149), n69Mbps(150), n74Mbps(151), n79Mbps(152), n88Mbps(153), n98Mbps(154), n108Mbps(155), n118Mbps(156), n128Mbps(157), n138Mbps(158), n147Mbps(159), n157Mbps(160), n180Mbps(161), n200Mbps(162), n220Mbps(163), n240Mbps(164), n260Mbps(165), n280Mbps(166), n290Mbps(167), n310Mbps(168), n350Mbps(169), n390Mbps(170), n430Mbps(171), n470Mbps(172), n510Mbps(173), n550Mbps(174), n590Mbps(175), n630Mbps(176), n710Mbps(177), n790Mbps(178), n870Mbps(179), n940Mbps(180), n1020Mbps(181), n1100Mbps(182), n1180Mbps(183), n1260Mbps(184), n1420Mbps(185), n1570Mbps(186), n1700Mbps(187), n1900Mbps(188), n2000Mbps(189), n2200Mbps(190), n2400Mbps(191), n2500Mbps(192), n2800Mbps(193), n3100Mbps(194), n3500Mbps(195), n3800Mbps(196), n4100Mbps(197), n4400Mbps(198), n4700Mbps(199), n5000Mbps(200), n5700Mbps(201), n6300Mbps(202), n6900Mbps(203), n7500Mbps(204), n8200Mbps(205), n8800Mbps(206), n9400Mbps(207), n10100Mbps(208), n11300Mbps(209), n12600Mbps(210), n13800Mbps(211), n15100Mbps(212), n16Gbps(213), n18Gbps(214), n19Gbps(215), n20Gbps(216), n23Gbps(217), n25Gbps(218), n28Gbps(219), n30Gbps(220), n33Gbps(221), n35Gbps(222), n38Gbps(223), n40Gbps(224), n45Gbps(225), n50Gbps(226), n55Gbps(227), n60Gbps(228), n65Gbps(229), n70Gbps(230), n75Gbps(231), n81Gbps(232), n91Gbps(233), n101Gbps(234), n111Gbps(235), n121Gbps(236), n131Gbps(237), n141Gbps(238), n151Gbps(239), n160Gbps(240), n180Gbps(241), n200Gbps(242), n220Gbps(243), n240Gbps(244), n260Gbps(245), n280Gbps(246), n300Gbps(247), n320Gbps(248), n360Gbps(249), n400Gbps(250), n440Gbps(251), n480Gbps(252), n520Gbps(253), n560Gbps(254), max(255) | ||
| mscAppnCosTgMaxEffectiveCapacity | 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.2 | ||
| During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum acceptable speed for a TG using this Class of Service. | |||
| OBJECT-TYPE | |||
| INTEGER | min(0), n170bps(1), n190bps(2), n210bps(3), n230bps(4), n240bps(5), n260bps(6), n280bps(7), n300bps(8), n340bps(9), n380bps(10), n410bps(11), n450bps(12), n490bps(13), n530bps(14), n560bps(15), n600bps(16), n680bps(17), n750bps(18), n830bps(19), n900bps(20), n980bps(21), n1050bps(22), n1130bps(23), n1200bps(24), n1350bps(25), n1500bps(26), n1700bps(27), n1800bps(28), n2000bps(29), n2100bps(30), n2300bps(31), n2400bps(32), n2700bps(33), n3000bps(34), n3300bps(35), n3600bps(36), n3900bps(37), n4200bps(38), n4500bps(39), n4800bps(40), n5400bps(41), n6000bps(42), n6600bps(43), n7200bps(44), n7800bps(45), n8400bps(46), n9000bps(47), n9600bps(48), n10800bps(49), n12000bps(50), n13200bps(51), n14400bps(52), n15600bps(53), n17kbps(54), n18kbps(55), n19kbps(56), n22kbps(57), n24kbps(58), n26kbps(59), n29kbps(60), n31kbps(61), n34kbps(62), n36kbps(63), n38kbps(64), n43kbps(65), n48kbps(66), n53kbps(67), n58kbps(68), n62kbps(69), n67kbps(70), n72kbps(71), n77kbps(72), n86kbps(73), n96kbps(74), n106kbps(75), n115kbps(76), n125kbps(77), n134kbps(78), n144kbps(79), n154kbps(80), n170kbps(81), n190kbps(82), n210kbps(83), n230kbps(84), n250kbps(85), n270kbps(86), n290kbps(87), n310kbps(88), n350kbps(89), n380kbps(90), n420kbps(91), n460kbps(92), n500kbps(93), n540kbps(94), n580kbps(95), n610kbps(96), n690kbps(97), n770kbps(98), n840kbps(99), n920kbps(100), n1000kbps(101), n1080kbps(102), n1150kbps(103), n1230kbps(104), n1380kbps(105), n1540kbps(106), n1700kbps(107), n1800kbps(108), n2000kbps(109), n2200kbps(110), n2300kbps(111), n2500kbps(112), n2800kbps(113), n3100kbps(114), n3400kbps(115), n3700kbps(116), n4000kbps(117), n4300kbps(118), n4600kbps(119), n4900kbps(120), n5500kbps(121), n6100kbps(122), n6800kbps(123), n7400kbps(124), n8000kbps(125), n8600kbps(126), n9200kbps(127), n9800kbps(128), n11100kbps(129), n12300kbps(130), n13500kbps(131), n14700kbps(132), n16Mbps(133), n17Mbps(134), n18Mbps(135), n20Mbps(136), n22Mbps(137), n25Mbps(138), n27Mbps(139), n29Mbps(140), n32Mbps(141), n34Mbps(142), n37Mbps(143), n39Mbps(144), n44Mbps(145), n49Mbps(146), n54Mbps(147), n59Mbps(148), n64Mbps(149), n69Mbps(150), n74Mbps(151), n79Mbps(152), n88Mbps(153), n98Mbps(154), n108Mbps(155), n118Mbps(156), n128Mbps(157), n138Mbps(158), n147Mbps(159), n157Mbps(160), n180Mbps(161), n200Mbps(162), n220Mbps(163), n240Mbps(164), n260Mbps(165), n280Mbps(166), n290Mbps(167), n310Mbps(168), n350Mbps(169), n390Mbps(170), n430Mbps(171), n470Mbps(172), n510Mbps(173), n550Mbps(174), n590Mbps(175), n630Mbps(176), n710Mbps(177), n790Mbps(178), n870Mbps(179), n940Mbps(180), n1020Mbps(181), n1100Mbps(182), n1180Mbps(183), n1260Mbps(184), n1420Mbps(185), n1570Mbps(186), n1700Mbps(187), n1900Mbps(188), n2000Mbps(189), n2200Mbps(190), n2400Mbps(191), n2500Mbps(192), n2800Mbps(193), n3100Mbps(194), n3500Mbps(195), n3800Mbps(196), n4100Mbps(197), n4400Mbps(198), n4700Mbps(199), n5000Mbps(200), n5700Mbps(201), n6300Mbps(202), n6900Mbps(203), n7500Mbps(204), n8200Mbps(205), n8800Mbps(206), n9400Mbps(207), n10100Mbps(208), n11300Mbps(209), n12600Mbps(210), n13800Mbps(211), n15100Mbps(212), n16Gbps(213), n18Gbps(214), n19Gbps(215), n20Gbps(216), n23Gbps(217), n25Gbps(218), n28Gbps(219), n30Gbps(220), n33Gbps(221), n35Gbps(222), n38Gbps(223), n40Gbps(224), n45Gbps(225), n50Gbps(226), n55Gbps(227), n60Gbps(228), n65Gbps(229), n70Gbps(230), n75Gbps(231), n81Gbps(232), n91Gbps(233), n101Gbps(234), n111Gbps(235), n121Gbps(236), n131Gbps(237), n141Gbps(238), n151Gbps(239), n160Gbps(240), n180Gbps(241), n200Gbps(242), n220Gbps(243), n240Gbps(244), n260Gbps(245), n280Gbps(246), n300Gbps(247), n320Gbps(248), n360Gbps(249), n400Gbps(250), n440Gbps(251), n480Gbps(252), n520Gbps(253), n560Gbps(254), max(255) | ||
| mscAppnCosTgMinConnectCost | 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.3 | ||
| During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the minimum cost per connect time for a TG. It is represented by a number between 0 and 255 and is the relative cost of using a TG. The units for cost-per-connect time are installation-defined and are typically based on the applicable tariffs of the transmission facility being used by the TG. The cost-per-connect time values that a network administrator assigns to the TGs in a network should reflect the relative expense of each TG as compared to all other TGs in the network. A value of 0 means that there is no additional cost in connecting over the TG(as in the case of a non-switched facility). | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| mscAppnCosTgMaxConnectCost | 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.4 | ||
| During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum cost per connect time for a TG. It is represented by a number between 0 and 255 and is the relative cost of using a TG. The units for cost-per-connect time are installation-defined and are typically based on the applicable tariffs of the transmission facility being used by the TG. The cost per connect time values that a network administrator assigns to the TGs in a network should reflect the relative expense of each TG as compared to all other TGs in the network. A value of 0 means that there is no additional cost in connecting over the TG (as in the case of a non-switched facility). | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| mscAppnCosTgMinByteCost | 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.5 | ||
| During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the minimum cost per byte allowed for a TG to be used for a session. It is a single byte value in the range 0 to 255 that expresses a relative cost of transmitting a byte over the associated TG. The units for cost per byte are user defined. Like cost per connect time, cost per byte is network specific and will not be uniform across networks unless assignments are coordinated. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| mscAppnCosTgMaxByteCost | 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.6 | ||
| During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum cost per byte allowed for a TG to be used for a session. It is a single byte value in the range 0 to 255 that expresses a relative cost of transmitting a byte over the associated TG. The units for cost per byte are user defined. Like cost per connect time, cost per byte is network specific and will not be uniform across networks unless assignments are coordinated. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| mscAppnCosTgMinSecurity | 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.7 | ||
| During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the minimum level of security protection required for a TG to be allowed to route session traffic. The security values are architecturally defined to provide continuity across all networks. Currently, security is encoded as one of the following seven values: guardedRadiation - guarded conduit containing the transmission medium; protected against physical and radiation tapping. encrypted - link level encryption is provided guardedConduit - guarded conduit; protected against physical tapping secureConduit- secure conduit, not guarded; e.g. pressurized pipe undergroundCable - underground cable located in a secure country publicSwitchedNetwork - public switched network; secure in the sense that there is no predetermined route that traffic will take nonSecure - all else, for example satellite-connected, located in a nonsecure country. | |||
| OBJECT-TYPE | |||
| INTEGER | nonSecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192) | ||
| mscAppnCosTgMaxSecurity | 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.8 | ||
| During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum level of security protection required for a TG to be allowed to route session traffic. The security values are architecturally defined to provide continuity across all networks. Currently, security is encoded as one of the following seven values: guardedRadiation - guarded conduit containing the transmission medium; protected against physical and radiation tapping. encrypted - link level encryption is provided guardedConduit - guarded conduit; protected against physical tapping secureConduit- secure conduit, not guarded; e.g. pressurized pipe undergroundCable - underground cable located in a secure country publicSwitchedNetwork - public switched network; secure in the sense that there is no predetermined route that traffic will take nonSecure - all else, for example. satellite-connected, located in a nonsecure country. | |||
| OBJECT-TYPE | |||
| INTEGER | nonSecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192) | ||
| mscAppnCosTgMinPropDelay | 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.9 | ||
| During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the minimum propagation delay for this Class of Service. Propogation delay is the length of time that it takes for a signal to propagate from one end of the TG to the other. Possible values are: minimum - minimum negligible - 400 microsec terrestrial - 10 msec packetSwitched - 150 msec long - 300 msec | |||
| OBJECT-TYPE | |||
| INTEGER | minimum(0), negligible(76), terrestrial(113), packetSwitched(145), long(153), maximum(255) | ||
| mscAppnCosTgMaxPropDelay | 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.10 | ||
| During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum propagation delay for this Class of Service. Propagation delay is the length of time that it takes for a signal to propagate from one end of the TG to the other. Possible values are: minimum - minimum negligible - 400 microsec terrestrial - 10 msec packetSwitched - 150 msec long - 300 msec | |||
| OBJECT-TYPE | |||
| INTEGER | minimum(0), negligible(76), terrestrial(113), packetSwitched(145), long(153), maximum(255) | ||
| mscAppnCosTgMinModemClass | 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.11 | ||
| During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the minimum modem class allowed for a TG to carry session traffic. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| mscAppnCosTgMaxModemClass | 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.12 | ||
| During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum modem class allowed for a TG to carry session traffic. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| mscAppnCosTgMinUserDefParm1 | 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.13 | ||
| During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the minimum acceptable value for user defined routing parameter number 1. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| mscAppnCosTgMaxUserDefParm1 | 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.14 | ||
| During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum acceptable value for user defined routing parameter number 1. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| mscAppnCosTgMinUserDefParm2 | 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.15 | ||
| During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the minimum acceptable value for user defined routing parameter number 2. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| mscAppnCosTgMaxUserDefParm2 | 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.16 | ||
| During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum acceptable value for user defined routing parameter number 2. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| mscAppnCosTgMinUserDefParm3 | 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.17 | ||
| During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the minimum acceptable value for user defined routing parameter number 3. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| mscAppnCosTgMaxUserDefParm3 | 1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.18 | ||
| During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and contains the maximum acceptable value for user defined routing parameter number 3. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| mscAppnCosNode | 1.3.6.1.4.1.562.36.2.1.110.17.11 | ||
| OBJECT IDENTIFIER | |||
| mscAppnCosNodeRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.17.11.1 | ||
| This entry controls the addition and deletion of mscAppnCosNode components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnCosNodeRowStatusEntry | |||
| mscAppnCosNodeRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.17.11.1.1 | ||
| A single entry in the table represents a single mscAppnCosNode component. | |||
| OBJECT-TYPE | |||
| MscAppnCosNodeRowStatusEntry | |||
| mscAppnCosNodeRowStatus | 1.3.6.1.4.1.562.36.2.1.110.17.11.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnCosNode components. These components can be added and deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnCosNodeComponentName | 1.3.6.1.4.1.562.36.2.1.110.17.11.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnCosNodeStorageType | 1.3.6.1.4.1.562.36.2.1.110.17.11.1.1.4 | ||
| This variable represents the storage type value for the mscAppnCosNode tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnCosNodeIndex | 1.3.6.1.4.1.562.36.2.1.110.17.11.1.1.10 | ||
| This variable represents the index for the mscAppnCosNode tables. | |||
| OBJECT-TYPE | |||
| Integer32 | 1..255 | ||
| mscAppnCosNodeProvTable | 1.3.6.1.4.1.562.36.2.1.110.17.11.10 | ||
| This group specifies a range of node characteristics for a class of service and is used in route selection for session traffic. During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnCosNodeProvEntry | |||
| mscAppnCosNodeProvEntry | 1.3.6.1.4.1.562.36.2.1.110.17.11.10.1 | ||
| An entry in the mscAppnCosNodeProvTable. | |||
| OBJECT-TYPE | |||
| MscAppnCosNodeProvEntry | |||
| mscAppnCosNodeMinRouteAddResistance | 1.3.6.1.4.1.562.36.2.1.110.17.11.10.1.1 | ||
| During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the minimum route addition resistance value allowed for a node to route session traffic. Route addition resistance defines the desirability for a network node to perform additional intermediate session routing. The higher the value, the less desirable the node is for session routing purposes. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| mscAppnCosNodeMaxRouteAddResistance | 1.3.6.1.4.1.562.36.2.1.110.17.11.10.1.2 | ||
| During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum route addition resistance value allowed for a node to route session traffic. Route addition resistance defines the desirability for a network node to perform additional intermediate session routing. The higher the value, the less desirable the node is for session routing purposes. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| mscAppnCosNodeMinStatus | 1.3.6.1.4.1.562.36.2.1.110.17.11.10.1.3 | ||
| During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the minimum congestion value that will be allowed for a node to carry session traffic. | |||
| OBJECT-TYPE | |||
| INTEGER | uncongested(0), congested(1) | ||
| mscAppnCosNodeMaxStatus | 1.3.6.1.4.1.562.36.2.1.110.17.11.10.1.4 | ||
| During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum congestion value that will be allowed for a node to carry session traffic. | |||
| OBJECT-TYPE | |||
| INTEGER | uncongested(0), congested(1) | ||
| mscAppnCosProvTable | 1.3.6.1.4.1.562.36.2.1.110.17.104 | ||
| This provisioning group specifies the transmission priority associated with a Class of Service. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnCosProvEntry | |||
| mscAppnCosProvEntry | 1.3.6.1.4.1.562.36.2.1.110.17.104.1 | ||
| An entry in the mscAppnCosProvTable. | |||
| OBJECT-TYPE | |||
| MscAppnCosProvEntry | |||
| mscAppnCosTransmissionPriority | 1.3.6.1.4.1.562.36.2.1.110.17.104.1.1 | ||
| This attribute specifies the transmission priority of session traffic using this class of service. | |||
| OBJECT-TYPE | |||
| INTEGER | low(1), medium(2), high(3), network(4) | ||
| mscAppnFrSvc | 1.3.6.1.4.1.562.36.2.1.110.18 | ||
| OBJECT IDENTIFIER | |||
| mscAppnFrSvcRowStatusTable | 1.3.6.1.4.1.562.36.2.1.110.18.1 | ||
| This entry controls the addition and deletion of mscAppnFrSvc components. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnFrSvcRowStatusEntry | |||
| mscAppnFrSvcRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.110.18.1.1 | ||
| A single entry in the table represents a single mscAppnFrSvc component. | |||
| OBJECT-TYPE | |||
| MscAppnFrSvcRowStatusEntry | |||
| mscAppnFrSvcRowStatus | 1.3.6.1.4.1.562.36.2.1.110.18.1.1.1 | ||
| This variable is used as the basis for SNMP naming of mscAppnFrSvc components. These components can be added and deleted. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| mscAppnFrSvcComponentName | 1.3.6.1.4.1.562.36.2.1.110.18.1.1.2 | ||
| This variable provides the component's string name for use with the ASCII Console Interface | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| mscAppnFrSvcStorageType | 1.3.6.1.4.1.562.36.2.1.110.18.1.1.4 | ||
| This variable represents the storage type value for the mscAppnFrSvc tables. | |||
| OBJECT-TYPE | |||
| StorageType | |||
| mscAppnFrSvcIndex | 1.3.6.1.4.1.562.36.2.1.110.18.1.1.10 | ||
| This variable represents the index for the mscAppnFrSvc tables. | |||
| OBJECT-TYPE | |||
| NonReplicated | |||
| mscAppnFrSvcBanTable | 1.3.6.1.4.1.562.36.2.1.110.18.10 | ||
| This group contains the BAN device MAC and SAP parameters for the APPN service Frame Relay SVC calls. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnFrSvcBanEntry | |||
| mscAppnFrSvcBanEntry | 1.3.6.1.4.1.562.36.2.1.110.18.10.1 | ||
| An entry in the mscAppnFrSvcBanTable. | |||
| OBJECT-TYPE | |||
| MscAppnFrSvcBanEntry | |||
| mscAppnFrSvcBanLocalMac | 1.3.6.1.4.1.562.36.2.1.110.18.10.1.1 | ||
| This attribute specifies the MAC address to be used for Frame Relay SVCs with BAN encapsulation. | |||
| OBJECT-TYPE | |||
| DashedHexString | SIZE(6) | ||
| mscAppnFrSvcBanLocalSap | 1.3.6.1.4.1.562.36.2.1.110.18.10.1.2 | ||
| This attribute specifies the local SAP number to be used for Frame Relay SVCs with BAN encapsulation. | |||
| OBJECT-TYPE | |||
| Hex | 4 | 8 | 12 | 16 | 20 | 24 | 28 | 32 | 36 | 40 | 44 | 48 | 52 | 56 | 60 | 64 | 68 | 72 | 76 | 80 | 84 | 88 | 92 | 96 | 100 | 104 | 108 | 112 | 116 | 120 | 124 | 128 | 132 | 136 | 140 | 144 | 148 | 152 | 156 | 160 | 164 | 168 | 172 | 176 | 180 | 184 | 188 | 192 | 196 | 200 | 204 | 208 | 212 | 216 | 220 | 224 | 228 | 232 | 236 | 240 | 244 | 248 | 252 | ||
| mscAppnFrSvcProvisionedTable | 1.3.6.1.4.1.562.36.2.1.110.18.11 | ||
| This group contains the provisonable parameters for the APPN service Frame Relay SVC calls. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnFrSvcProvisionedEntry | |||
| mscAppnFrSvcProvisionedEntry | 1.3.6.1.4.1.562.36.2.1.110.18.11.1 | ||
| An entry in the mscAppnFrSvcProvisionedTable. | |||
| OBJECT-TYPE | |||
| MscAppnFrSvcProvisionedEntry | |||
| mscAppnFrSvcMaximumFrameRelaySvcs | 1.3.6.1.4.1.562.36.2.1.110.18.11.1.1 | ||
| This attribute specifies the maximum number of concurrently active Frame Relay SVC calls that are allowed for this service. This attribute does not include the general switched virtual circuits (GSVC). | |||
| OBJECT-TYPE | |||
| Unsigned32 | 1..3072 | ||
| mscAppnFrSvcRateEnforcement | 1.3.6.1.4.1.562.36.2.1.110.18.11.1.2 | ||
| This attribute specifies whether rate enforcement is to be used for new Frame Relay SVCs on this service. When rate enforcement is on the rate of data sent by the service to individual Frame Relay SVCs is controlled. | |||
| OBJECT-TYPE | |||
| INTEGER | off(0), on(1) | ||
| mscAppnFrSvcMaximumCir | 1.3.6.1.4.1.562.36.2.1.110.18.11.1.4 | ||
| This attribute specifies the maximum rate enforcement CIR (Committed Information Rate) that is allowed for use with the Frame Relay SVCs on this service. During call setup negotiation, if the caller to this service requests a higher CIR value be used, the CIR used is reduced to the value of maximumCir. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..52000000 | ||
| mscAppnFrSvcOperationalTable | 1.3.6.1.4.1.562.36.2.1.110.18.12 | ||
| This group contains the operational attributes for the APPN Frame Relay SVC calls. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnFrSvcOperationalEntry | |||
| mscAppnFrSvcOperationalEntry | 1.3.6.1.4.1.562.36.2.1.110.18.12.1 | ||
| An entry in the mscAppnFrSvcOperationalTable. | |||
| OBJECT-TYPE | |||
| MscAppnFrSvcOperationalEntry | |||
| mscAppnFrSvcCurrentNumberOfSvcCalls | 1.3.6.1.4.1.562.36.2.1.110.18.12.1.1 | ||
| This attribute indicates the number of Frame Relay SVCs currently existing on this service. This attribute does not include the general switched virtual circuits (GSVC). | |||
| OBJECT-TYPE | |||
| Gauge32 | 0..3072 | ||
| mscAppnProcessParmsTable | 1.3.6.1.4.1.562.36.2.1.110.100 | ||
| This group contains attributes of the SNA service which are required for operation within the Passport environment. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnProcessParmsEntry | |||
| mscAppnProcessParmsEntry | 1.3.6.1.4.1.562.36.2.1.110.100.1 | ||
| An entry in the mscAppnProcessParmsTable. | |||
| OBJECT-TYPE | |||
| MscAppnProcessParmsEntry | |||
| mscAppnLogicalProcessor | 1.3.6.1.4.1.562.36.2.1.110.100.1.1 | ||
| This attribute specifies the logical processor on which the Appn component will utilize memory and CPU resources. | |||
| OBJECT-TYPE | |||
| Link | |||
| mscAppnMaximumSvcs | 1.3.6.1.4.1.562.36.2.1.110.100.1.22 | ||
| This attribute specifies the total number of general switched virtual circuits (GSVC) that can be active on this Appn node. Once this number is reached no GSVC calls will be accepted by the service. This attribute does not include the Frame Relay switched virtual circuits. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 1..4096 | ||
| mscAppnMaximumLinkStations | 1.3.6.1.4.1.562.36.2.1.110.100.1.23 | ||
| This attribute specifies the total number of link stations for GSVCs, Frame Relay PVCs and SVCs that can be active on this Appn node. Once the value of activeLinkStations reaches or exceeds the value of maximumLinkStations, no new incoming SVC calls (GSVCs and Frame Relay SVCs) will be accepted by the service until the value of activeLinkStations is again below the value of maximumLinkStations. Outgoing GSVCs and Frame Relay PVCs (incoming or outgoing) are provisioned and their call setups at this end are not affected when the value of activeLinkStations reaches or exceeds the value of maximumLinkStations. Link stations are dynamically created for the end user applications as required. Therefore the value of activeLinkStations may exceed the value of maximumLinkStations. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 1..4096 | ||
| mscAppnControlPointCreateParmsTable | 1.3.6.1.4.1.562.36.2.1.110.101 | ||
| Parameters required to define the behavior of the SNA node. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnControlPointCreateParmsEntry | |||
| mscAppnControlPointCreateParmsEntry | 1.3.6.1.4.1.562.36.2.1.110.101.1 | ||
| An entry in the mscAppnControlPointCreateParmsTable. | |||
| OBJECT-TYPE | |||
| MscAppnControlPointCreateParmsEntry | |||
| mscAppnFqCpName | 1.3.6.1.4.1.562.36.2.1.110.101.1.1 | ||
| The network qualified control point (CP) name. This is the name by which the node is identified within the APPN network. It is signalled on the XID 3 exchange and is the end-point of CP-CP sessions established with this node. The first portion of this name, up to the period, is the network identifier for the network to which this node belongs. An APPN network is a portion of a virtual private network which has a separately administered name space. This network identifier is the implicit qualifier of all resources which do not have an explicit network identifier. | |||
| OBJECT-TYPE | |||
| AsciiString | SIZE(3..17) | ||
| mscAppnBlockNumber | 1.3.6.1.4.1.562.36.2.1.110.101.1.3 | ||
| The block number identifies the product of the node. It is the first three hexadecimal digits of the SNA node id. | |||
| OBJECT-TYPE | |||
| Hex | 0..4095 | ||
| mscAppnIdNumber | 1.3.6.1.4.1.562.36.2.1.110.101.1.4 | ||
| The idNumber is used to identify the local SNA node. It is the last five hexadecimal digits of the SNA node id and is administratively defined. The idNumber will be combined with the three hexadecimal digit block number to form the SNA node id. The SNA node id is included in APPN alerts and in XIDs. A unique value is required for connections to SNA. | |||
| OBJECT-TYPE | |||
| Hex | 0..1048575 | ||
| mscAppnRouteAdditionResistance | 1.3.6.1.4.1.562.36.2.1.110.101.1.5 | ||
| Route addition resistance is a value that indicates the relative desirability of using this node for intermediate session traffic.The value, which can be any integer 0-255, is used in route computation. The lower the value, the more desirable the node is for intermediate routing. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..255 | ||
| mscAppnFeatures | 1.3.6.1.4.1.562.36.2.1.110.101.1.6 | ||
| This attribute supports several YES/NO flags which are defined in the create parameters: multipleDomainSupport If present, specifies that Management Services (MS) supports Multiple Domain Support (MDS) and MS capabilities exchange. registerWithCDS If present, for a network node this specifies whether local and domain resources may be registered with a central directory server. storeEndptRscvs If present, specifies that route selection control vectors (RSCV) should be stored for diagnostic purposes on sessions which terminate in this node. Note that selecting this value means that an RSCV will be stored for each ISR session. This extra storage can be up to 256 bytes per session. storeIsrRscvs If present, specifies that route selection control vectors (RSCV) should be stored for diagnostic purposes on intermediate session routing (ISR) sessions. Note that selecting this value means that an RSCV will be stored for each ISR session. This extra storage can be up to 256 bytes per session. Description of bits: multipleDomainSupport(0) registerWithCDS(1) storeEndptRscvs(2) storeIsrRscvs(3) | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1) | ||
| mscAppnMaximumLocates | 1.3.6.1.4.1.562.36.2.1.110.101.1.7 | ||
| This attribute represents the maximum number of locate requests the node can handle simultaneously. Attribute locateTimeout should be set to ensure that locate requests can timeout, thereby freeing up node resources. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| mscAppnMaximumDirectorySize | 1.3.6.1.4.1.562.36.2.1.110.101.1.8 | ||
| This attribute contains the maximum number of SnaDirectoryEntry components that can be defined or learned by this node. A value of zero means unlimited. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| mscAppnMdsTxAlertQueueSize | 1.3.6.1.4.1.562.36.2.1.110.101.1.9 | ||
| This is the size of Multiple Domain Support send alert queue. When the limit is reached, the MDS component deletes the oldest entry in the queue. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| mscAppnTreeCacheSize | 1.3.6.1.4.1.562.36.2.1.110.101.1.10 | ||
| This is the topology database routing tree cache size. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 8..65535 | ||
| mscAppnTreeCacheUseLimit | 1.3.6.1.4.1.562.36.2.1.110.101.1.11 | ||
| This is the number of times a cached tree can be reused. Once this number is exceeded, the tree is discarded and recomputed. This allows the node to balance sessions among equal weight routes. A low value provides better load balancing at the expense of increased activation latency. The minimum is 1. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 1..65535 | ||
| mscAppnMaximumTopologyNodes | 1.3.6.1.4.1.562.36.2.1.110.101.1.12 | ||
| This is the maximum number of Appn network nodes that can be stored in the Topology Database (zero means unlimited). | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| mscAppnMaximumTopologyTgs | 1.3.6.1.4.1.562.36.2.1.110.101.1.13 | ||
| This is the maximum number of Transmission Groups that can be stored in the Topology Database (zero means unlimited). | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| mscAppnMaximumIsrSessions | 1.3.6.1.4.1.562.36.2.1.110.101.1.14 | ||
| This attribute represents the maximum number of ISR sessions this node can participate in at once. The minimum value is 100. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 100..65535 | ||
| mscAppnIsrUpperCongestionThreshold | 1.3.6.1.4.1.562.36.2.1.110.101.1.15 | ||
| This is the upper threshold for ISR sessions. This attribute and the following one control the node's ISR congestion status. The node state changes from uncongested to congested if the number of ISR sessions exceeds the upper threshold. The node state changes back to uncongested once the number of ISR sessions dips below the lower threshold. To prevent thrashing, the lower threshold should be less than the upper threshold. The upper threshold should be lower than maximumIsrSessions. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| mscAppnIsrLowerCongestionThreshold | 1.3.6.1.4.1.562.36.2.1.110.101.1.16 | ||
| This is the lower threshold for the ISR session congestion algorithm. This value should be less than isrUpperCongestionThreshold. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| mscAppnIsrMaxRuSize | 1.3.6.1.4.1.562.36.2.1.110.101.1.17 | ||
| Maximum request unit (RU) size supported for intermediate routing (ISR) sessions. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| mscAppnIsrRxPacingWindow | 1.3.6.1.4.1.562.36.2.1.110.101.1.18 | ||
| This is the suggested receive pacing window size for intermediate sessions. This value is only used on the secondary hop of intermediate sessions if the adjacent node does not support adaptive pacing. A value of zero means that no pacing will occur. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..32767 | ||
| mscAppnLocateTimeout | 1.3.6.1.4.1.562.36.2.1.110.101.1.19 | ||
| This attribute specifies the time in seconds before a network search will time-out. A value of zero indicates that the search has no time limit. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..65535 | ||
| mscAppnHprSupport | 1.3.6.1.4.1.562.36.2.1.110.101.1.20 | ||
| This attribute specifies the type of High Performance Routing (HPR) that is to be used on this node. The options are: none - the node does not support HPR, anrOnly - the node only supports Automatic Network Routing (ANR), or rtp - the node supports Rapid Transport Protocol as an end point. The default value of rtp ensures that the node can Aping other nodes via a HPR pipe, this option is also required to allow dependent LU sessions teminating on this node to use HPR and for the node to act as a boundary node between ISR only nodes and the HPR capable portion of the network. With this option, the node can work with non-HPR capable nodes. | |||
| OBJECT-TYPE | |||
| INTEGER | none(0), anrOnly(1), rtp(2) | ||
| mscAppnDlurSupport | 1.3.6.1.4.1.562.36.2.1.110.101.1.21 | ||
| This attribute specifies whether or not this node supports dependent logical unit requestor (DLUR). By default, DLUR is not supported. If this attribute is set to yes, ensure that the Dlur subcomponent is provisioned with appropriate values, if this attribute is set to no, the Dlur subcomponent is not used and is ignored if present. | |||
| OBJECT-TYPE | |||
| INTEGER | no(0), yes(1) | ||
| mscAppnStateTable | 1.3.6.1.4.1.562.36.2.1.110.102 | ||
| This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnStateEntry | |||
| mscAppnStateEntry | 1.3.6.1.4.1.562.36.2.1.110.102.1 | ||
| An entry in the mscAppnStateTable. | |||
| OBJECT-TYPE | |||
| MscAppnStateEntry | |||
| mscAppnAdminState | 1.3.6.1.4.1.562.36.2.1.110.102.1.1 | ||
| This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. | |||
| OBJECT-TYPE | |||
| INTEGER | locked(0), unlocked(1), shuttingDown(2) | ||
| mscAppnOperationalState | 1.3.6.1.4.1.562.36.2.1.110.102.1.2 | ||
| This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. | |||
| OBJECT-TYPE | |||
| INTEGER | disabled(0), enabled(1) | ||
| mscAppnUsageState | 1.3.6.1.4.1.562.36.2.1.110.102.1.3 | ||
| This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. | |||
| OBJECT-TYPE | |||
| INTEGER | idle(0), active(1), busy(2) | ||
| mscAppnOperationalTable | 1.3.6.1.4.1.562.36.2.1.110.103 | ||
| This group contains the node operational characteristics. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| MscAppnOperationalEntry | |||
| mscAppnOperationalEntry | 1.3.6.1.4.1.562.36.2.1.110.103.1 | ||
| An entry in the mscAppnOperationalTable. | |||
| OBJECT-TYPE | |||
| MscAppnOperationalEntry | |||
| mscAppnUpTime | 1.3.6.1.4.1.562.36.2.1.110.103.1.1 | ||
| This attribute represents the time in hundredths of a second since the node was started or restarted. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..4294967295 | ||
| mscAppnHeapSpaceLimit | 1.3.6.1.4.1.562.36.2.1.110.103.1.2 | ||
| This attribute represents the size of the heap in bytes, as obtained by storage management from the underlying operating system. | |||
| OBJECT-TYPE | |||
| Gauge32 | 0..4294967295 | ||
| mscAppnHeapSpaceCurrent | 1.3.6.1.4.1.562.36.2.1.110.103.1.3 | ||
| This attribute contains the number of bytes in the memory segment that are currently allocated to the processes associated with the Appn component. SNMP APPN MIB = ibmappnMemoryUsed | |||
| OBJECT-TYPE | |||
| Gauge32 | 0..4294967295 | ||
| mscAppnMemWarningThreshold | 1.3.6.1.4.1.562.36.2.1.110.103.1.4 | ||
| This attribute contains the memory allocation threshold beyond which storage management considers the storage resources to be constrained. This is calculated as a fraction of heapSpaceLimit. The value returned now is always zero until the functionality is supported in future release. SNMP APPN MIB = ibmappnMemoryWarnThresh | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..4294967295 | ||
| mscAppnMemCriticalThreshold | 1.3.6.1.4.1.562.36.2.1.110.103.1.5 | ||
| This attribute represents the memory allocation threshold beyond which storage management considers the storage resources to be critically constrained. The value is calculated as a fraction of heapSpaceLimit. The value returned now is always zero until the functionality is supported in future release. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..4294967295 | ||
| mscAppnNnFunctionsSupported | 1.3.6.1.4.1.562.36.2.1.110.103.1.6 | ||
| The network node functions supported may include any of the following: receiveRegistration - If present, indicates that this node supports receiving registered characteristics on a GDS frame. This function is not supported in the current release. gateway - If present, indicates that this is a gateway node. centralDirectoryServer - If present, indicates that this node supports central directory server cache. treeCaching -If present, indicates that this node supports route tree cache. treeUpdates - If present, indicates that this node supports incremental tree update, which is only supported when tree caching is supported. intermediateSessionRouting - Indicates that the node supports intermediate session routing. Description of bits: receiveRegistration(0) gateway(1) centralDirectoryServer(2) treeCaching(3) treeUpdates(4) intermediateSessionRouting(5) | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1) | ||
| mscAppnGeneralFunctionsSupported | 1.3.6.1.4.1.562.36.2.1.110.103.1.7 | ||
| The general functions supported may include any of the following: negotiableLs -If present, indicates that this node supports negotiable link stations. segmentReassembly -If present, indicates whether this node supports segment reassembly. This is only supported when segment generation is also supported. bindReassembly -If present, indicates whether this node supports Bind segment reassembly. This will only be supported when Bind segment generation is also supported. parallelTgs -If present, indicates whether this node supports parallel TGs. callIn - If present, indicates whether this node allows call-in from nodes not defined locally. adaptivePacing - If present, indicates whether this node supports adaptive bind pacing. Description of bits: negotiableLs(0) segmentReassembly(1) bindReassembly(2) parallelTgs(3) callIn(4) adaptivePacing(5) | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1) | ||
| mscAppnStatus | 1.3.6.1.4.1.562.36.2.1.110.103.1.8 | ||
| This attribute contains the status of the node. This may be nodeUncongested or one or more of the following: isrCongested The number of ISR sessions is greater than specified by the isrSessionsUpperThreshold attribute. This node is not be included in route selection by other nodes when this congestion exists. endPtDepleted The number of end-point sessions has reached the maximum specified. isrDepleted The number of ISR sessions has reached the maximum specified by the maximumIsrSessions attribute. This node is not included in intermediate route selection by other nodes when resources are depleted. quiescing Indicates whether the node is quiescing. This node is not included in route selection by other nodes when the node is quiescing. Description of bits: nodeUncongested(0) notused1(1) quiescing(2) notused3(3) notused4(4) endPtDepleted(5) isrDepleted(6) isrCongested(7) | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1) | ||
| mscAppnFlowReductionSequenceNumber | 1.3.6.1.4.1.562.36.2.1.110.103.1.9 | ||
| Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be associated with multiple APPN resources. This object is the last FRSN sent in a topology update the adjacent network nodes. SNMP APPN MIB = ibmappnNodeNnFrsn | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..4294967295 | ||
| mscAppnResourceSequenceNumber | 1.3.6.1.4.1.562.36.2.1.110.103.1.10 | ||
| Resource sequence number of this Appn network node. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..4294967295 | ||
| mscAppnDefinedLsGoodXids | 1.3.6.1.4.1.562.36.2.1.110.103.1.11 | ||
| This attribute represents the total number of successful XIDs that have been received on all defined link stations since the last time this node was initialized. When the upper limit is reached, the number wraps around to 0. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDefinedLsBadXids | 1.3.6.1.4.1.562.36.2.1.110.103.1.12 | ||
| This attribute represents the total number of unsuccessful XIDs that have been received on all defined link stations since the last time this node was initialized. When the upper limit is reached, the number wraps around to 0. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDynamicLsGoodXids | 1.3.6.1.4.1.562.36.2.1.110.103.1.13 | ||
| This attribute represents the total number of successful XIDs that have been received on all dynamic link stations since the last time this node was initialized. When the upper limit is reached, the number wraps around to 0. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnDynamicLsBadXids | 1.3.6.1.4.1.562.36.2.1.110.103.1.14 | ||
| This attribute represents the total number of unsuccessful XIDs that have been received on all dynamic link stations since the last time this node was initialized. When the upper limit is reached, the number wraps around to 0. | |||
| OBJECT-TYPE | |||
| PassportCounter64 | |||
| mscAppnActiveSvcs | 1.3.6.1.4.1.562.36.2.1.110.103.1.15 | ||
| This attribute indicates the number of general switched virtual circuits (GSVC) on this Appn node at the time of the query. This attribute does not include the Frame Relay switched virtual circuits. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..4096 | ||
| mscAppnActiveLinkStations | 1.3.6.1.4.1.562.36.2.1.110.103.1.16 | ||
| This attribute indicates the number of link stations (for GSVCs, Frame Relay PVCs and SVCs) on the Appn node at the time of the query. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 0..4096 | ||
| appnMIB | 1.3.6.1.4.1.562.36.2.2.29 | ||
| OBJECT IDENTIFIER | |||
| appnGroup | 1.3.6.1.4.1.562.36.2.2.29.1 | ||
| OBJECT IDENTIFIER | |||
| appnGroupCA | 1.3.6.1.4.1.562.36.2.2.29.1.1 | ||
| OBJECT IDENTIFIER | |||
| appnGroupCA02 | 1.3.6.1.4.1.562.36.2.2.29.1.1.3 | ||
| OBJECT IDENTIFIER | |||
| appnGroupCA02DevelopmentLoad | 1.3.6.1.4.1.562.36.2.2.29.1.1.3.1 | ||
| OBJECT IDENTIFIER | |||
| appnGroupCA0214 | 1.3.6.1.4.1.562.36.2.2.29.1.1.3.1.14 | ||
| OBJECT IDENTIFIER | |||
| appnGroupCA0214A | 1.3.6.1.4.1.562.36.2.2.29.1.1.3.1.14.1 | ||
| OBJECT IDENTIFIER | |||
| appnCapabilities | 1.3.6.1.4.1.562.36.2.2.29.3 | ||
| OBJECT IDENTIFIER | |||
| appnCapabilitiesCA | 1.3.6.1.4.1.562.36.2.2.29.3.1 | ||
| OBJECT IDENTIFIER | |||
| appnCapabilitiesCA02 | 1.3.6.1.4.1.562.36.2.2.29.3.1.3 | ||
| OBJECT IDENTIFIER | |||
| appnCapabilitiesCA02DevelopmentLoad | 1.3.6.1.4.1.562.36.2.2.29.3.1.3.1 | ||
| OBJECT IDENTIFIER | |||
| appnCapabilitiesCA0214 | 1.3.6.1.4.1.562.36.2.2.29.3.1.3.1.14 | ||
| OBJECT IDENTIFIER | |||
| appnCapabilitiesCA0214A | 1.3.6.1.4.1.562.36.2.2.29.3.1.3.1.14.1 | ||
| OBJECT IDENTIFIER | |||
| MscAppnRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnRowStatus | |||
| DisplayString as mscAppnComponentName | |||
| StorageType as mscAppnStorageType | |||
| AsciiStringIndex as mscAppnIndex | |||
| MscAppnProcessParmsEntry | |||
| SEQUENCE | |||
| Link as mscAppnLogicalProcessor | |||
| Unsigned32 as mscAppnMaximumSvcs | |||
| Unsigned32 as mscAppnMaximumLinkStations | |||
| MscAppnControlPointCreateParmsEntry | |||
| SEQUENCE | |||
| AsciiString as mscAppnFqCpName | |||
| Hex as mscAppnBlockNumber | |||
| Hex as mscAppnIdNumber | |||
| Unsigned32 as mscAppnRouteAdditionResistance | |||
| OCTET STRING as mscAppnFeatures | |||
| Unsigned32 as mscAppnMaximumLocates | |||
| Unsigned32 as mscAppnMaximumDirectorySize | |||
| Unsigned32 as mscAppnMdsTxAlertQueueSize | |||
| Unsigned32 as mscAppnTreeCacheSize | |||
| Unsigned32 as mscAppnTreeCacheUseLimit | |||
| Unsigned32 as mscAppnMaximumTopologyNodes | |||
| Unsigned32 as mscAppnMaximumTopologyTgs | |||
| Unsigned32 as mscAppnMaximumIsrSessions | |||
| Unsigned32 as mscAppnIsrUpperCongestionThreshold | |||
| Unsigned32 as mscAppnIsrLowerCongestionThreshold | |||
| Unsigned32 as mscAppnIsrMaxRuSize | |||
| Unsigned32 as mscAppnIsrRxPacingWindow | |||
| Unsigned32 as mscAppnLocateTimeout | |||
| INTEGER as mscAppnHprSupport | |||
| INTEGER as mscAppnDlurSupport | |||
| MscAppnStateEntry | |||
| SEQUENCE | |||
| INTEGER as mscAppnAdminState | |||
| INTEGER as mscAppnOperationalState | |||
| INTEGER as mscAppnUsageState | |||
| MscAppnOperationalEntry | |||
| SEQUENCE | |||
| Unsigned32 as mscAppnUpTime | |||
| Gauge32 as mscAppnHeapSpaceLimit | |||
| Gauge32 as mscAppnHeapSpaceCurrent | |||
| Unsigned32 as mscAppnMemWarningThreshold | |||
| Unsigned32 as mscAppnMemCriticalThreshold | |||
| OCTET STRING as mscAppnNnFunctionsSupported | |||
| OCTET STRING as mscAppnGeneralFunctionsSupported | |||
| OCTET STRING as mscAppnStatus | |||
| Unsigned32 as mscAppnFlowReductionSequenceNumber | |||
| Unsigned32 as mscAppnResourceSequenceNumber | |||
| PassportCounter64 as mscAppnDefinedLsGoodXids | |||
| PassportCounter64 as mscAppnDefinedLsBadXids | |||
| PassportCounter64 as mscAppnDynamicLsGoodXids | |||
| PassportCounter64 as mscAppnDynamicLsBadXids | |||
| Unsigned32 as mscAppnActiveSvcs | |||
| Unsigned32 as mscAppnActiveLinkStations | |||
| MscAppnDnaRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnDnaRowStatus | |||
| DisplayString as mscAppnDnaComponentName | |||
| StorageType as mscAppnDnaStorageType | |||
| NonReplicated as mscAppnDnaIndex | |||
| MscAppnDnaAddressEntry | |||
| SEQUENCE | |||
| INTEGER as mscAppnDnaNumberingPlanIndicator | |||
| DigitString as mscAppnDnaDataNetworkAddress | |||
| MscAppnDnaOutgoingOptionsEntry | |||
| SEQUENCE | |||
| INTEGER as mscAppnDnaOutDefaultPriority | |||
| INTEGER as mscAppnDnaOutDefaultPathSensitivity | |||
| INTEGER as mscAppnDnaOutPathSensitivityOverRide | |||
| INTEGER as mscAppnDnaOutDefaultPathReliability | |||
| INTEGER as mscAppnDnaOutAccess | |||
| INTEGER as mscAppnDnaDefaultTransferPriority | |||
| INTEGER as mscAppnDnaTransferPriorityOverRide | |||
| MscAppnDnaIncomingOptionsEntry | |||
| SEQUENCE | |||
| INTEGER as mscAppnDnaIncAccess | |||
| MscAppnDnaCallOptionsEntry | |||
| SEQUENCE | |||
| Unsigned32 as mscAppnDnaDefaultRecvFrmNetworkThruputClass | |||
| Unsigned32 as mscAppnDnaDefaultSendToNetworkThruputClass | |||
| Unsigned32 as mscAppnDnaDefaultRecvFrmNetworkWindowSize | |||
| Unsigned32 as mscAppnDnaDefaultSendToNetworkWindowSize | |||
| Unsigned32 as mscAppnDnaAccountClass | |||
| OCTET STRING as mscAppnDnaAccountCollection | |||
| Unsigned32 as mscAppnDnaServiceExchange | |||
| MscAppnDnaHgMRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnDnaHgMRowStatus | |||
| DisplayString as mscAppnDnaHgMComponentName | |||
| StorageType as mscAppnDnaHgMStorageType | |||
| NonReplicated as mscAppnDnaHgMIndex | |||
| MscAppnDnaHgMIfEntry | |||
| SEQUENCE | |||
| Unsigned32 as mscAppnDnaHgMAvailabilityUpdateThreshold | |||
| MscAppnDnaHgMOpEntry | |||
| SEQUENCE | |||
| Unsigned32 as mscAppnDnaHgMMaxAvailableChannels | |||
| Unsigned32 as mscAppnDnaHgMAvailableChannels | |||
| INTEGER as mscAppnDnaHgMAvailabilityDelta | |||
| MscAppnDnaHgMHgAddrRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnDnaHgMHgAddrRowStatus | |||
| DisplayString as mscAppnDnaHgMHgAddrComponentName | |||
| StorageType as mscAppnDnaHgMHgAddrStorageType | |||
| Integer32 as mscAppnDnaHgMHgAddrIndex | |||
| MscAppnDnaHgMHgAddrAddrEntry | |||
| SEQUENCE | |||
| INTEGER as mscAppnDnaHgMHgAddrNumberingPlanIndicator | |||
| DigitString as mscAppnDnaHgMHgAddrDataNetworkAddress | |||
| MscAppnDnaCugRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnDnaCugRowStatus | |||
| DisplayString as mscAppnDnaCugComponentName | |||
| StorageType as mscAppnDnaCugStorageType | |||
| Integer32 as mscAppnDnaCugIndex | |||
| MscAppnDnaCugCugOptionsEntry | |||
| SEQUENCE | |||
| INTEGER as mscAppnDnaCugType | |||
| DigitString as mscAppnDnaCugDnic | |||
| Unsigned32 as mscAppnDnaCugInterlockCode | |||
| INTEGER as mscAppnDnaCugPreferential | |||
| INTEGER as mscAppnDnaCugOutCalls | |||
| INTEGER as mscAppnDnaCugIncCalls | |||
| INTEGER as mscAppnDnaCugPrivileged | |||
| MscAppnDlciRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnDlciRowStatus | |||
| DisplayString as mscAppnDlciComponentName | |||
| StorageType as mscAppnDlciStorageType | |||
| Integer32 as mscAppnDlciIndex | |||
| MscAppnDlciStateEntry | |||
| SEQUENCE | |||
| INTEGER as mscAppnDlciAdminState | |||
| INTEGER as mscAppnDlciOperationalState | |||
| INTEGER as mscAppnDlciUsageState | |||
| MscAppnDlciSpOpEntry | |||
| SEQUENCE | |||
| INTEGER as mscAppnDlciRateEnforcement | |||
| Gauge32 as mscAppnDlciCommittedInformationRate | |||
| Gauge32 as mscAppnDlciCommittedBurstSize | |||
| Gauge32 as mscAppnDlciExcessInformationRate | |||
| Gauge32 as mscAppnDlciExcessBurstSize | |||
| Gauge32 as mscAppnDlciMeasurementInterval | |||
| MscAppnDlciDcRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnDlciDcRowStatus | |||
| DisplayString as mscAppnDlciDcComponentName | |||
| StorageType as mscAppnDlciDcStorageType | |||
| NonReplicated as mscAppnDlciDcIndex | |||
| MscAppnDlciDcOptionsEntry | |||
| SEQUENCE | |||
| INTEGER as mscAppnDlciDcRemoteNpi | |||
| DigitString as mscAppnDlciDcRemoteDna | |||
| Unsigned32 as mscAppnDlciDcRemoteDlci | |||
| INTEGER as mscAppnDlciDcType | |||
| INTEGER as mscAppnDlciDcTransferPriority | |||
| INTEGER as mscAppnDlciDcDiscardPriority | |||
| MscAppnDlciDcNfaEntry | |||
| SEQUENCE | |||
| Integer32 as mscAppnDlciDcNfaIndex | |||
| HexString as mscAppnDlciDcNfaValue | |||
| RowStatus as mscAppnDlciDcNfaRowStatus | |||
| MscAppnDlciVcRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnDlciVcRowStatus | |||
| DisplayString as mscAppnDlciVcComponentName | |||
| StorageType as mscAppnDlciVcStorageType | |||
| NonReplicated as mscAppnDlciVcIndex | |||
| MscAppnDlciVcCadEntry | |||
| SEQUENCE | |||
| INTEGER as mscAppnDlciVcType | |||
| INTEGER as mscAppnDlciVcState | |||
| INTEGER as mscAppnDlciVcPreviousState | |||
| Unsigned32 as mscAppnDlciVcDiagnosticCode | |||
| Unsigned32 as mscAppnDlciVcPreviousDiagnosticCode | |||
| INTEGER as mscAppnDlciVcCalledNpi | |||
| DigitString as mscAppnDlciVcCalledDna | |||
| Unsigned32 as mscAppnDlciVcCalledLcn | |||
| INTEGER as mscAppnDlciVcCallingNpi | |||
| DigitString as mscAppnDlciVcCallingDna | |||
| Unsigned32 as mscAppnDlciVcCallingLcn | |||
| INTEGER as mscAppnDlciVcAccountingEnabled | |||
| INTEGER as mscAppnDlciVcFastSelectCall | |||
| INTEGER as mscAppnDlciVcPathReliability | |||
| INTEGER as mscAppnDlciVcAccountingEnd | |||
| INTEGER as mscAppnDlciVcPriority | |||
| Unsigned32 as mscAppnDlciVcSegmentSize | |||
| Unsigned32 as mscAppnDlciVcMaxSubnetPktSize | |||
| INTEGER as mscAppnDlciVcRcosToNetwork | |||
| INTEGER as mscAppnDlciVcRcosFromNetwork | |||
| INTEGER as mscAppnDlciVcEmissionPriorityToNetwork | |||
| INTEGER as mscAppnDlciVcEmissionPriorityFromNetwork | |||
| AsciiString as mscAppnDlciVcDataPath | |||
| MscAppnDlciVcIntdEntry | |||
| SEQUENCE | |||
| Hex as mscAppnDlciVcCallReferenceNumber | |||
| Unsigned32 as mscAppnDlciVcElapsedTimeTillNow | |||
| Unsigned32 as mscAppnDlciVcSegmentsRx | |||
| Unsigned32 as mscAppnDlciVcSegmentsSent | |||
| EnterpriseDateAndTime as mscAppnDlciVcStartTime | |||
| MscAppnDlciVcFrdEntry | |||
| SEQUENCE | |||
| Unsigned32 as mscAppnDlciVcFrmCongestedToSubnet | |||
| Unsigned32 as mscAppnDlciVcCannotForwardToSubnet | |||
| Unsigned32 as mscAppnDlciVcNotDataXferToSubnet | |||
| Unsigned32 as mscAppnDlciVcOutOfRangeFrmFromSubnet | |||
| Unsigned32 as mscAppnDlciVcCombErrorsFromSubnet | |||
| Unsigned32 as mscAppnDlciVcDuplicatesFromSubnet | |||
| Unsigned32 as mscAppnDlciVcNotDataXferFromSubnet | |||
| Unsigned32 as mscAppnDlciVcFrmLossTimeouts | |||
| Unsigned32 as mscAppnDlciVcOoSeqByteCntExceeded | |||
| Unsigned32 as mscAppnDlciVcPeakOoSeqPktCount | |||
| Unsigned32 as mscAppnDlciVcPeakOoSeqFrmForwarded | |||
| Unsigned32 as mscAppnDlciVcSendSequenceNumber | |||
| Unsigned32 as mscAppnDlciVcPktRetryTimeouts | |||
| Unsigned32 as mscAppnDlciVcPeakRetryQueueSize | |||
| Unsigned32 as mscAppnDlciVcSubnetRecoveries | |||
| Unsigned32 as mscAppnDlciVcOoSeqPktCntExceeded | |||
| Unsigned32 as mscAppnDlciVcPeakOoSeqByteCount | |||
| MscAppnDlciVcDmepEntry | |||
| SEQUENCE | |||
| RowPointer as mscAppnDlciVcDmepValue | |||
| MscAppnDlciBnnLsDefRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnDlciBnnLsDefRowStatus | |||
| DisplayString as mscAppnDlciBnnLsDefComponentName | |||
| StorageType as mscAppnDlciBnnLsDefStorageType | |||
| Integer32 as mscAppnDlciBnnLsDefIndex | |||
| MscAppnDlciBnnLsDefProvEntry | |||
| SEQUENCE | |||
| INTEGER as mscAppnDlciBnnLsDefDspuService | |||
| AsciiString as mscAppnDlciBnnLsDefAdjacentCpName | |||
| INTEGER as mscAppnDlciBnnLsDefAdjacentCpType | |||
| Unsigned32 as mscAppnDlciBnnLsDefTgNum | |||
| AsciiString as mscAppnDlciBnnLsDefDlusName | |||
| AsciiString as mscAppnDlciBnnLsDefBackupDlusName | |||
| INTEGER as mscAppnDlciBnnLsDefHprSupported | |||
| Hex as mscAppnDlciBnnLsDefAdjacentNodeID | |||
| INTEGER as mscAppnDlciBnnLsDefCpCpSessionSupport | |||
| Unsigned32 as mscAppnDlciBnnLsDefMaxTxBtuSize | |||
| INTEGER as mscAppnDlciBnnLsDefLsRole | |||
| MscAppnDlciSpRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnDlciSpRowStatus | |||
| DisplayString as mscAppnDlciSpComponentName | |||
| StorageType as mscAppnDlciSpStorageType | |||
| NonReplicated as mscAppnDlciSpIndex | |||
| MscAppnDlciSpParmsEntry | |||
| SEQUENCE | |||
| INTEGER as mscAppnDlciSpRateEnforcement | |||
| Unsigned32 as mscAppnDlciSpCommittedInformationRate | |||
| Unsigned32 as mscAppnDlciSpCommittedBurstSize | |||
| Unsigned32 as mscAppnDlciSpExcessBurstSize | |||
| Unsigned32 as mscAppnDlciSpMeasurementInterval | |||
| MscAppnDlciBanLsDefRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnDlciBanLsDefRowStatus | |||
| DisplayString as mscAppnDlciBanLsDefComponentName | |||
| StorageType as mscAppnDlciBanLsDefStorageType | |||
| DashedHexString as mscAppnDlciBanLsDefMacIndex | |||
| Integer32 as mscAppnDlciBanLsDefSapIndex | |||
| MscAppnDlciBanLsDefProvEntry | |||
| SEQUENCE | |||
| INTEGER as mscAppnDlciBanLsDefDspuService | |||
| AsciiString as mscAppnDlciBanLsDefAdjacentCpName | |||
| INTEGER as mscAppnDlciBanLsDefAdjacentCpType | |||
| Unsigned32 as mscAppnDlciBanLsDefTgNum | |||
| AsciiString as mscAppnDlciBanLsDefDlusName | |||
| AsciiString as mscAppnDlciBanLsDefBackupDlusName | |||
| INTEGER as mscAppnDlciBanLsDefHprSupported | |||
| Hex as mscAppnDlciBanLsDefAdjacentNodeID | |||
| INTEGER as mscAppnDlciBanLsDefCpCpSessionSupport | |||
| Unsigned32 as mscAppnDlciBanLsDefMaxTxBtuSize | |||
| INTEGER as mscAppnDlciBanLsDefLsRole | |||
| MscAppnDlciBanRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnDlciBanRowStatus | |||
| DisplayString as mscAppnDlciBanComponentName | |||
| StorageType as mscAppnDlciBanStorageType | |||
| NonReplicated as mscAppnDlciBanIndex | |||
| MscAppnDlciBanProvEntry | |||
| SEQUENCE | |||
| DashedHexString as mscAppnDlciBanLocalMac | |||
| Hex as mscAppnDlciBanLocalSap | |||
| MscAppnLcnRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnLcnRowStatus | |||
| DisplayString as mscAppnLcnComponentName | |||
| StorageType as mscAppnLcnStorageType | |||
| Integer32 as mscAppnLcnIndex | |||
| MscAppnLcnStateEntry | |||
| SEQUENCE | |||
| INTEGER as mscAppnLcnAdminState | |||
| INTEGER as mscAppnLcnOperationalState | |||
| INTEGER as mscAppnLcnUsageState | |||
| MscAppnLcnDcRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnLcnDcRowStatus | |||
| DisplayString as mscAppnLcnDcComponentName | |||
| StorageType as mscAppnLcnDcStorageType | |||
| NonReplicated as mscAppnLcnDcIndex | |||
| MscAppnLcnDcOptionsEntry | |||
| SEQUENCE | |||
| INTEGER as mscAppnLcnDcRemoteNpi | |||
| DigitString as mscAppnLcnDcRemoteDna | |||
| INTEGER as mscAppnLcnDcTransferPriority | |||
| INTEGER as mscAppnLcnDcDiscardPriority | |||
| MscAppnLcnVcRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnLcnVcRowStatus | |||
| DisplayString as mscAppnLcnVcComponentName | |||
| StorageType as mscAppnLcnVcStorageType | |||
| NonReplicated as mscAppnLcnVcIndex | |||
| MscAppnLcnVcCadEntry | |||
| SEQUENCE | |||
| INTEGER as mscAppnLcnVcType | |||
| INTEGER as mscAppnLcnVcState | |||
| INTEGER as mscAppnLcnVcPreviousState | |||
| Unsigned32 as mscAppnLcnVcDiagnosticCode | |||
| Unsigned32 as mscAppnLcnVcPreviousDiagnosticCode | |||
| INTEGER as mscAppnLcnVcCalledNpi | |||
| DigitString as mscAppnLcnVcCalledDna | |||
| Unsigned32 as mscAppnLcnVcCalledLcn | |||
| INTEGER as mscAppnLcnVcCallingNpi | |||
| DigitString as mscAppnLcnVcCallingDna | |||
| Unsigned32 as mscAppnLcnVcCallingLcn | |||
| INTEGER as mscAppnLcnVcAccountingEnabled | |||
| INTEGER as mscAppnLcnVcFastSelectCall | |||
| INTEGER as mscAppnLcnVcLocalRxPktSize | |||
| INTEGER as mscAppnLcnVcLocalTxPktSize | |||
| Unsigned32 as mscAppnLcnVcLocalTxWindowSize | |||
| Unsigned32 as mscAppnLcnVcLocalRxWindowSize | |||
| INTEGER as mscAppnLcnVcPathReliability | |||
| INTEGER as mscAppnLcnVcAccountingEnd | |||
| INTEGER as mscAppnLcnVcPriority | |||
| Unsigned32 as mscAppnLcnVcSegmentSize | |||
| INTEGER as mscAppnLcnVcSubnetTxPktSize | |||
| Unsigned32 as mscAppnLcnVcSubnetTxWindowSize | |||
| INTEGER as mscAppnLcnVcSubnetRxPktSize | |||
| Unsigned32 as mscAppnLcnVcSubnetRxWindowSize | |||
| Unsigned32 as mscAppnLcnVcMaxSubnetPktSize | |||
| INTEGER as mscAppnLcnVcTransferPriorityToNetwork | |||
| INTEGER as mscAppnLcnVcTransferPriorityFromNetwork | |||
| MscAppnLcnVcIntdEntry | |||
| SEQUENCE | |||
| Hex as mscAppnLcnVcCallReferenceNumber | |||
| Unsigned32 as mscAppnLcnVcElapsedTimeTillNow | |||
| Unsigned32 as mscAppnLcnVcSegmentsRx | |||
| Unsigned32 as mscAppnLcnVcSegmentsSent | |||
| EnterpriseDateAndTime as mscAppnLcnVcStartTime | |||
| MscAppnLcnVcStatsEntry | |||
| SEQUENCE | |||
| Unsigned32 as mscAppnLcnVcAckStackingTimeouts | |||
| Unsigned32 as mscAppnLcnVcOutOfRangeFrmFromSubnet | |||
| Unsigned32 as mscAppnLcnVcDuplicatesFromSubnet | |||
| Unsigned32 as mscAppnLcnVcFrmRetryTimeouts | |||
| Unsigned32 as mscAppnLcnVcPeakRetryQueueSize | |||
| Unsigned32 as mscAppnLcnVcPeakOoSeqQueueSize | |||
| Unsigned32 as mscAppnLcnVcPeakOoSeqFrmForwarded | |||
| Unsigned32 as mscAppnLcnVcPeakStackedAcksRx | |||
| Unsigned32 as mscAppnLcnVcSubnetRecoveries | |||
| Unsigned32 as mscAppnLcnVcWindowClosuresToSubnet | |||
| Unsigned32 as mscAppnLcnVcWindowClosuresFromSubnet | |||
| Unsigned32 as mscAppnLcnVcWrTriggers | |||
| MscAppnPortRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnPortRowStatus | |||
| DisplayString as mscAppnPortComponentName | |||
| StorageType as mscAppnPortStorageType | |||
| AsciiStringIndex as mscAppnPortIndex | |||
| MscAppnPortConfigEntry | |||
| SEQUENCE | |||
| INTEGER as mscAppnPortType | |||
| Unsigned32 as mscAppnPortMaxRxBtuSize | |||
| Unsigned32 as mscAppnPortMaxTxBtuSize | |||
| Unsigned32 as mscAppnPortTotLinkActLim | |||
| Unsigned32 as mscAppnPortInbLinkActLim | |||
| Unsigned32 as mscAppnPortOutLinkActLim | |||
| INTEGER as mscAppnPortLsRole | |||
| Unsigned32 as mscAppnPortActXidExchLim | |||
| Unsigned32 as mscAppnPortNonactXidExchLim | |||
| INTEGER as mscAppnPortLsXmitRxCap | |||
| Unsigned32 as mscAppnPortMaxIfrmRxWindow | |||
| Unsigned32 as mscAppnPortTargetPacingCount | |||
| MscAppnPortOperEntry | |||
| SEQUENCE | |||
| INTEGER as mscAppnPortState | |||
| INTEGER as mscAppnPortDlcType | |||
| INTEGER as mscAppnPortSimRim | |||
| PassportCounter64 as mscAppnPortDefinedLsGoodXids | |||
| PassportCounter64 as mscAppnPortDefinedLsBadXids | |||
| PassportCounter64 as mscAppnPortDynLsGoodXids | |||
| PassportCounter64 as mscAppnPortDynLsBadXids | |||
| MscAppnPortTgCharEntry | |||
| SEQUENCE | |||
| INTEGER as mscAppnPortEffectiveCap | |||
| INTEGER as mscAppnPortConnectCost | |||
| INTEGER as mscAppnPortByteCost | |||
| INTEGER as mscAppnPortSecurity | |||
| INTEGER as mscAppnPortPropagationDelay | |||
| Unsigned32 as mscAppnPortUserDefinedParm1 | |||
| Unsigned32 as mscAppnPortUserDefinedParm2 | |||
| Unsigned32 as mscAppnPortUserDefinedParm3 | |||
| MscAppnLsRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnLsRowStatus | |||
| DisplayString as mscAppnLsComponentName | |||
| StorageType as mscAppnLsStorageType | |||
| AsciiStringIndex as mscAppnLsIndex | |||
| MscAppnLsLsVcReferenceEntry | |||
| SEQUENCE | |||
| RowPointer as mscAppnLsName | |||
| Hex as mscAppnLsSap | |||
| MscAppnLsConfigEntry | |||
| SEQUENCE | |||
| AsciiString as mscAppnLsPortName | |||
| OCTET STRING as mscAppnLsFeatures | |||
| Unsigned32 as mscAppnLsMaxTxBtuSize | |||
| MscAppnLsOperEntry | |||
| SEQUENCE | |||
| INTEGER as mscAppnLsDlcType | |||
| INTEGER as mscAppnLsLinkStationState | |||
| INTEGER as mscAppnLsLinkStationSubState | |||
| Gauge32 as mscAppnLsActSessCount | |||
| AsciiString as mscAppnLsActualCpName | |||
| INTEGER as mscAppnLsActualCpType | |||
| AsciiString as mscAppnLsDlcName | |||
| INTEGER as mscAppnLsDynamicOrDefined | |||
| INTEGER as mscAppnLsMigration | |||
| Unsigned32 as mscAppnLsTgNum | |||
| INTEGER as mscAppnLsHprSupport | |||
| Hex as mscAppnLsAnrLabel | |||
| MscAppnLsTgCharEntry | |||
| SEQUENCE | |||
| INTEGER as mscAppnLsEffectiveCap | |||
| INTEGER as mscAppnLsConnectCost | |||
| INTEGER as mscAppnLsByteCost | |||
| INTEGER as mscAppnLsSecurity | |||
| INTEGER as mscAppnLsPropagationDelay | |||
| Unsigned32 as mscAppnLsUserDefinedParm1 | |||
| Unsigned32 as mscAppnLsUserDefinedParm2 | |||
| Unsigned32 as mscAppnLsUserDefinedParm3 | |||
| MscAppnLsStatsEntry | |||
| SEQUENCE | |||
| PassportCounter64 as mscAppnLsInXidBytes | |||
| PassportCounter64 as mscAppnLsInMsgBytes | |||
| PassportCounter64 as mscAppnLsInXidFrames | |||
| PassportCounter64 as mscAppnLsInMsgFrames | |||
| PassportCounter64 as mscAppnLsOutXidBytes | |||
| PassportCounter64 as mscAppnLsOutMsgBytes | |||
| PassportCounter64 as mscAppnLsOutXidFrames | |||
| PassportCounter64 as mscAppnLsOutMsgFrames | |||
| PassportCounter64 as mscAppnLsInInvalidSnaFrames | |||
| PassportCounter64 as mscAppnLsInSessionControlFrames | |||
| PassportCounter64 as mscAppnLsOutSessionControlFrames | |||
| PassportCounter64 as mscAppnLsEchoResponse | |||
| PassportCounter64 as mscAppnLsCurrentDelay | |||
| PassportCounter64 as mscAppnLsMaxDelay | |||
| PassportCounter64 as mscAppnLsMinDelay | |||
| PassportCounter64 as mscAppnLsGoodXids | |||
| PassportCounter64 as mscAppnLsBadXids | |||
| MscAppnDirEntRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnDirEntRowStatus | |||
| DisplayString as mscAppnDirEntComponentName | |||
| StorageType as mscAppnDirEntStorageType | |||
| AsciiStringIndex as mscAppnDirEntIndex | |||
| MscAppnDirEntOperEntry | |||
| SEQUENCE | |||
| AsciiString as mscAppnDirEntServerName | |||
| AsciiString as mscAppnDirEntLuOwnerName | |||
| INTEGER as mscAppnDirEntLocation | |||
| INTEGER as mscAppnDirEntEntryType | |||
| INTEGER as mscAppnDirEntWildCard | |||
| MscAppnAdjNnRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnAdjNnRowStatus | |||
| DisplayString as mscAppnAdjNnComponentName | |||
| StorageType as mscAppnAdjNnStorageType | |||
| AsciiStringIndex as mscAppnAdjNnIndex | |||
| MscAppnAdjNnOperEntry | |||
| SEQUENCE | |||
| INTEGER as mscAppnAdjNnCpCpSessStatus | |||
| PassportCounter64 as mscAppnAdjNnOutOfSeqTdus | |||
| Unsigned32 as mscAppnAdjNnLastFrsnSent | |||
| Unsigned32 as mscAppnAdjNnLastFrsnReceived | |||
| MscAppnNnRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnNnRowStatus | |||
| DisplayString as mscAppnNnComponentName | |||
| StorageType as mscAppnNnStorageType | |||
| AsciiStringIndex as mscAppnNnIndex | |||
| MscAppnNnOperEntry | |||
| SEQUENCE | |||
| Unsigned32 as mscAppnNnDaysLeft | |||
| INTEGER as mscAppnNnNodeType | |||
| Unsigned32 as mscAppnNnResourceSequenceNumber | |||
| INTEGER as mscAppnNnRouteAdditionResistance | |||
| OCTET STRING as mscAppnNnStatus | |||
| OCTET STRING as mscAppnNnFunctionSupported | |||
| MscAppnLocTgRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnLocTgRowStatus | |||
| DisplayString as mscAppnLocTgComponentName | |||
| StorageType as mscAppnLocTgStorageType | |||
| AsciiStringIndex as mscAppnLocTgDestFqcpNameIndex | |||
| Integer32 as mscAppnLocTgTransmissionGroupIndex | |||
| MscAppnLocTgOperEntry | |||
| SEQUENCE | |||
| OCTET STRING as mscAppnLocTgStatus | |||
| Unsigned32 as mscAppnLocTgResourceSequenceNumber | |||
| MscAppnLocTgLinkAddressEntry | |||
| SEQUENCE | |||
| HexString as mscAppnLocTgDlcData | |||
| MscAppnLocTgTgCharEntry | |||
| SEQUENCE | |||
| INTEGER as mscAppnLocTgEffectiveCap | |||
| INTEGER as mscAppnLocTgConnectCost | |||
| INTEGER as mscAppnLocTgByteCost | |||
| INTEGER as mscAppnLocTgSecurity | |||
| INTEGER as mscAppnLocTgPropagationDelay | |||
| Unsigned32 as mscAppnLocTgUserDefinedParm1 | |||
| Unsigned32 as mscAppnLocTgUserDefinedParm2 | |||
| Unsigned32 as mscAppnLocTgUserDefinedParm3 | |||
| MscAppnIsrSessRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnIsrSessRowStatus | |||
| DisplayString as mscAppnIsrSessComponentName | |||
| StorageType as mscAppnIsrSessStorageType | |||
| AsciiStringIndex as mscAppnIsrSessFqcpNameIndex | |||
| HexString as mscAppnIsrSessProcedureCorrelationIdIndex | |||
| MscAppnIsrSessOperEntry | |||
| SEQUENCE | |||
| INTEGER as mscAppnIsrSessTransmissionPriority | |||
| AsciiString as mscAppnIsrSessCosName | |||
| INTEGER as mscAppnIsrSessLimitedResource | |||
| MscAppnIsrSessPriStatsRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnIsrSessPriStatsRowStatus | |||
| DisplayString as mscAppnIsrSessPriStatsComponentName | |||
| StorageType as mscAppnIsrSessPriStatsStorageType | |||
| NonReplicated as mscAppnIsrSessPriStatsIndex | |||
| MscAppnIsrSessPriStatsStatsEntry | |||
| SEQUENCE | |||
| Unsigned32 as mscAppnIsrSessPriStatsRxRuSize | |||
| Unsigned32 as mscAppnIsrSessPriStatsMaxTxBtuSize | |||
| Unsigned32 as mscAppnIsrSessPriStatsMaxRxBtuSize | |||
| INTEGER as mscAppnIsrSessPriStatsMaxTxPacWin | |||
| INTEGER as mscAppnIsrSessPriStatsCurTxPacWin | |||
| INTEGER as mscAppnIsrSessPriStatsMaxRxPacWin | |||
| INTEGER as mscAppnIsrSessPriStatsCurRxPacWin | |||
| PassportCounter64 as mscAppnIsrSessPriStatsTxDataframes | |||
| PassportCounter64 as mscAppnIsrSessPriStatsTxFmdFrames | |||
| PassportCounter64 as mscAppnIsrSessPriStatsTxDataBytes | |||
| PassportCounter64 as mscAppnIsrSessPriStatsRxDataFrames | |||
| PassportCounter64 as mscAppnIsrSessPriStatsRxFmdFrames | |||
| PassportCounter64 as mscAppnIsrSessPriStatsRxDataBytes | |||
| Hex as mscAppnIsrSessPriStatsSidh | |||
| Hex as mscAppnIsrSessPriStatsSidl | |||
| INTEGER as mscAppnIsrSessPriStatsOdai | |||
| AsciiString as mscAppnIsrSessPriStatsLsName | |||
| MscAppnIsrSessSecStatsRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnIsrSessSecStatsRowStatus | |||
| DisplayString as mscAppnIsrSessSecStatsComponentName | |||
| StorageType as mscAppnIsrSessSecStatsStorageType | |||
| NonReplicated as mscAppnIsrSessSecStatsIndex | |||
| MscAppnIsrSessSecStatsStatsEntry | |||
| SEQUENCE | |||
| Unsigned32 as mscAppnIsrSessSecStatsRxRuSize | |||
| Unsigned32 as mscAppnIsrSessSecStatsMaxTxBtuSize | |||
| Unsigned32 as mscAppnIsrSessSecStatsMaxRxBtuSize | |||
| INTEGER as mscAppnIsrSessSecStatsMaxTxPacWin | |||
| INTEGER as mscAppnIsrSessSecStatsCurTxPacWin | |||
| INTEGER as mscAppnIsrSessSecStatsMaxRxPacWin | |||
| INTEGER as mscAppnIsrSessSecStatsCurRxPacWin | |||
| PassportCounter64 as mscAppnIsrSessSecStatsTxDataframes | |||
| PassportCounter64 as mscAppnIsrSessSecStatsTxFmdFrames | |||
| PassportCounter64 as mscAppnIsrSessSecStatsTxDataBytes | |||
| PassportCounter64 as mscAppnIsrSessSecStatsRxDataFrames | |||
| PassportCounter64 as mscAppnIsrSessSecStatsRxFmdFrames | |||
| PassportCounter64 as mscAppnIsrSessSecStatsRxDataBytes | |||
| Hex as mscAppnIsrSessSecStatsSidh | |||
| Hex as mscAppnIsrSessSecStatsSidl | |||
| INTEGER as mscAppnIsrSessSecStatsOdai | |||
| AsciiString as mscAppnIsrSessSecStatsLsName | |||
| MscAppnNnTgRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnNnTgRowStatus | |||
| DisplayString as mscAppnNnTgComponentName | |||
| StorageType as mscAppnNnTgStorageType | |||
| AsciiStringIndex as mscAppnNnTgOwnerFqcpNameIndex | |||
| AsciiStringIndex as mscAppnNnTgDestFqcpNameIndex | |||
| Integer32 as mscAppnNnTgTransmissionGroupIndex | |||
| MscAppnNnTgOperEntry | |||
| SEQUENCE | |||
| Unsigned32 as mscAppnNnTgFlowReductionSequenceNumber | |||
| Unsigned32 as mscAppnNnTgDaysLeft | |||
| Unsigned32 as mscAppnNnTgResourceSequenceNumber | |||
| OCTET STRING as mscAppnNnTgStatus | |||
| MscAppnNnTgLinkAddressEntry | |||
| SEQUENCE | |||
| HexString as mscAppnNnTgDlcData | |||
| MscAppnNnTgTgCharEntry | |||
| SEQUENCE | |||
| INTEGER as mscAppnNnTgEffectiveCap | |||
| INTEGER as mscAppnNnTgConnectCost | |||
| INTEGER as mscAppnNnTgByteCost | |||
| INTEGER as mscAppnNnTgSecurity | |||
| INTEGER as mscAppnNnTgPropagationDelay | |||
| Unsigned32 as mscAppnNnTgUserDefinedParm1 | |||
| Unsigned32 as mscAppnNnTgUserDefinedParm2 | |||
| Unsigned32 as mscAppnNnTgUserDefinedParm3 | |||
| MscAppnRtpRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnRtpRowStatus | |||
| DisplayString as mscAppnRtpComponentName | |||
| StorageType as mscAppnRtpStorageType | |||
| AsciiStringIndex as mscAppnRtpIndex | |||
| MscAppnRtpOperEntry | |||
| SEQUENCE | |||
| AsciiString as mscAppnRtpLocalLsName | |||
| AsciiString as mscAppnRtpRemoteCpName | |||
| AsciiString as mscAppnRtpCosName | |||
| INTEGER as mscAppnRtpActiveSessions | |||
| HexString as mscAppnRtpLocalTcid | |||
| HexString as mscAppnRtpRemoteTcid | |||
| Unsigned32 as mscAppnRtpIdleTimer | |||
| INTEGER as mscAppnRtpMaxBtuSize | |||
| MscAppnRtpStatsEntry | |||
| SEQUENCE | |||
| PassportCounter64 as mscAppnRtpTxBytes | |||
| PassportCounter64 as mscAppnRtpRxBytes | |||
| PassportCounter64 as mscAppnRtpBytesResent | |||
| PassportCounter64 as mscAppnRtpBytesDiscarded | |||
| PassportCounter64 as mscAppnRtpPktTx | |||
| PassportCounter64 as mscAppnRtpPktRx | |||
| PassportCounter64 as mscAppnRtpPktResent | |||
| PassportCounter64 as mscAppnRtpPktDiscard | |||
| PassportCounter64 as mscAppnRtpLostFrames | |||
| Gauge32 as mscAppnRtpCurTxRate | |||
| Gauge32 as mscAppnRtpMaxTxRate | |||
| Gauge32 as mscAppnRtpMinTxRate | |||
| Gauge32 as mscAppnRtpCurRxRate | |||
| Gauge32 as mscAppnRtpMaxRxRate | |||
| Gauge32 as mscAppnRtpMinRxRate | |||
| Gauge32 as mscAppnRtpBurstSize | |||
| TimeTicks as mscAppnRtpUptime | |||
| Gauge32 as mscAppnRtpSmoothRoundTripTime | |||
| Gauge32 as mscAppnRtpLastRoundTripTime | |||
| Gauge32 as mscAppnRtpShortReqTimer | |||
| PassportCounter64 as mscAppnRtpShortReqTimeouts | |||
| PassportCounter64 as mscAppnRtpIdleTimeouts | |||
| PassportCounter64 as mscAppnRtpRxInvalidSnaFrames | |||
| PassportCounter64 as mscAppnRtpInSessionControlFrames | |||
| PassportCounter64 as mscAppnRtpOutSessionControlFrames | |||
| MscAppnDluRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnDluRowStatus | |||
| DisplayString as mscAppnDluComponentName | |||
| StorageType as mscAppnDluStorageType | |||
| AsciiStringIndex as mscAppnDluIndex | |||
| MscAppnDluOperEntry | |||
| SEQUENCE | |||
| INTEGER as mscAppnDluSscpSessActive | |||
| INTEGER as mscAppnDluPluSessActive | |||
| AsciiString as mscAppnDluDlusName | |||
| AsciiString as mscAppnDluPluName | |||
| INTEGER as mscAppnDluNauAddress | |||
| MscAppnDluSscpRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnDluSscpRowStatus | |||
| DisplayString as mscAppnDluSscpComponentName | |||
| StorageType as mscAppnDluSscpStorageType | |||
| NonReplicated as mscAppnDluSscpIndex | |||
| MscAppnDluSscpStatsEntry | |||
| SEQUENCE | |||
| Unsigned32 as mscAppnDluSscpRxRuSize | |||
| Unsigned32 as mscAppnDluSscpMaxTxBtuSize | |||
| Unsigned32 as mscAppnDluSscpMaxRxBtuSize | |||
| INTEGER as mscAppnDluSscpMaxTxPacWin | |||
| INTEGER as mscAppnDluSscpCurTxPacWin | |||
| INTEGER as mscAppnDluSscpMaxRxPacWin | |||
| INTEGER as mscAppnDluSscpCurRxPacWin | |||
| PassportCounter64 as mscAppnDluSscpTxDataframes | |||
| PassportCounter64 as mscAppnDluSscpTxFmdFrames | |||
| PassportCounter64 as mscAppnDluSscpTxDataBytes | |||
| PassportCounter64 as mscAppnDluSscpRxDataFrames | |||
| PassportCounter64 as mscAppnDluSscpRxFmdFrames | |||
| PassportCounter64 as mscAppnDluSscpRxDataBytes | |||
| Hex as mscAppnDluSscpSidh | |||
| Hex as mscAppnDluSscpSidl | |||
| INTEGER as mscAppnDluSscpOdai | |||
| AsciiString as mscAppnDluSscpLsName | |||
| MscAppnDluUsStatRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnDluUsStatRowStatus | |||
| DisplayString as mscAppnDluUsStatComponentName | |||
| StorageType as mscAppnDluUsStatStorageType | |||
| NonReplicated as mscAppnDluUsStatIndex | |||
| MscAppnDluUsStatStatsEntry | |||
| SEQUENCE | |||
| Unsigned32 as mscAppnDluUsStatRxRuSize | |||
| Unsigned32 as mscAppnDluUsStatMaxTxBtuSize | |||
| Unsigned32 as mscAppnDluUsStatMaxRxBtuSize | |||
| INTEGER as mscAppnDluUsStatMaxTxPacWin | |||
| INTEGER as mscAppnDluUsStatCurTxPacWin | |||
| INTEGER as mscAppnDluUsStatMaxRxPacWin | |||
| INTEGER as mscAppnDluUsStatCurRxPacWin | |||
| PassportCounter64 as mscAppnDluUsStatTxDataframes | |||
| PassportCounter64 as mscAppnDluUsStatTxFmdFrames | |||
| PassportCounter64 as mscAppnDluUsStatTxDataBytes | |||
| PassportCounter64 as mscAppnDluUsStatRxDataFrames | |||
| PassportCounter64 as mscAppnDluUsStatRxFmdFrames | |||
| PassportCounter64 as mscAppnDluUsStatRxDataBytes | |||
| Hex as mscAppnDluUsStatSidh | |||
| Hex as mscAppnDluUsStatSidl | |||
| INTEGER as mscAppnDluUsStatOdai | |||
| AsciiString as mscAppnDluUsStatLsName | |||
| MscAppnDluDsStatRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnDluDsStatRowStatus | |||
| DisplayString as mscAppnDluDsStatComponentName | |||
| StorageType as mscAppnDluDsStatStorageType | |||
| NonReplicated as mscAppnDluDsStatIndex | |||
| MscAppnDluDsStatStatsEntry | |||
| SEQUENCE | |||
| Unsigned32 as mscAppnDluDsStatRxRuSize | |||
| Unsigned32 as mscAppnDluDsStatMaxTxBtuSize | |||
| Unsigned32 as mscAppnDluDsStatMaxRxBtuSize | |||
| INTEGER as mscAppnDluDsStatMaxTxPacWin | |||
| INTEGER as mscAppnDluDsStatCurTxPacWin | |||
| INTEGER as mscAppnDluDsStatMaxRxPacWin | |||
| INTEGER as mscAppnDluDsStatCurRxPacWin | |||
| PassportCounter64 as mscAppnDluDsStatTxDataframes | |||
| PassportCounter64 as mscAppnDluDsStatTxFmdFrames | |||
| PassportCounter64 as mscAppnDluDsStatTxDataBytes | |||
| PassportCounter64 as mscAppnDluDsStatRxDataFrames | |||
| PassportCounter64 as mscAppnDluDsStatRxFmdFrames | |||
| PassportCounter64 as mscAppnDluDsStatRxDataBytes | |||
| Hex as mscAppnDluDsStatSidh | |||
| Hex as mscAppnDluDsStatSidl | |||
| INTEGER as mscAppnDluDsStatOdai | |||
| AsciiString as mscAppnDluDsStatLsName | |||
| MscAppnDlusRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnDlusRowStatus | |||
| DisplayString as mscAppnDlusComponentName | |||
| StorageType as mscAppnDlusStorageType | |||
| AsciiStringIndex as mscAppnDlusIndex | |||
| MscAppnDlusOperEntry | |||
| SEQUENCE | |||
| INTEGER as mscAppnDlusPrimaryDlus | |||
| INTEGER as mscAppnDlusPipeState | |||
| Gauge32 as mscAppnDlusActivePUs | |||
| MscAppnDlusDlusStatEntry | |||
| SEQUENCE | |||
| PassportCounter64 as mscAppnDlusReqActPuTx | |||
| PassportCounter64 as mscAppnDlusReqActPuRspRx | |||
| PassportCounter64 as mscAppnDlusActPuRx | |||
| PassportCounter64 as mscAppnDlusActPuRspTx | |||
| PassportCounter64 as mscAppnDlusReqDactPuTx | |||
| PassportCounter64 as mscAppnDlusReqDactPuRspRx | |||
| PassportCounter64 as mscAppnDlusDactPuRx | |||
| PassportCounter64 as mscAppnDlusDactPuRspTx | |||
| PassportCounter64 as mscAppnDlusActLuRx | |||
| PassportCounter64 as mscAppnDlusActLuRspTx | |||
| PassportCounter64 as mscAppnDlusDactLuRx | |||
| PassportCounter64 as mscAppnDlusDactLuRspTx | |||
| PassportCounter64 as mscAppnDlusSscpPuMuRx | |||
| PassportCounter64 as mscAppnDlusSscpPuMuTx | |||
| PassportCounter64 as mscAppnDlusSscpLuMuRx | |||
| PassportCounter64 as mscAppnDlusSscpLuMuTx | |||
| MscAppnDLURRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnDLURRowStatus | |||
| DisplayString as mscAppnDLURComponentName | |||
| StorageType as mscAppnDLURStorageType | |||
| NonReplicated as mscAppnDLURIndex | |||
| MscAppnDLURDlurParmsEntry | |||
| SEQUENCE | |||
| AsciiString as mscAppnDLURPrimaryDefDlusName | |||
| AsciiString as mscAppnDLURSecondaryDefDlusName | |||
| Unsigned32 as mscAppnDLURDlusRetryTimeout | |||
| Unsigned32 as mscAppnDLURDlusRetryLimit | |||
| MscAppnCosRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnCosRowStatus | |||
| DisplayString as mscAppnCosComponentName | |||
| StorageType as mscAppnCosStorageType | |||
| AsciiStringIndex as mscAppnCosIndex | |||
| MscAppnCosProvEntry | |||
| SEQUENCE | |||
| INTEGER as mscAppnCosTransmissionPriority | |||
| MscAppnCosTgRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnCosTgRowStatus | |||
| DisplayString as mscAppnCosTgComponentName | |||
| StorageType as mscAppnCosTgStorageType | |||
| Integer32 as mscAppnCosTgIndex | |||
| MscAppnCosTgProvEntry | |||
| SEQUENCE | |||
| INTEGER as mscAppnCosTgMinEffectiveCapacity | |||
| INTEGER as mscAppnCosTgMaxEffectiveCapacity | |||
| INTEGER as mscAppnCosTgMinConnectCost | |||
| INTEGER as mscAppnCosTgMaxConnectCost | |||
| INTEGER as mscAppnCosTgMinByteCost | |||
| INTEGER as mscAppnCosTgMaxByteCost | |||
| INTEGER as mscAppnCosTgMinSecurity | |||
| INTEGER as mscAppnCosTgMaxSecurity | |||
| INTEGER as mscAppnCosTgMinPropDelay | |||
| INTEGER as mscAppnCosTgMaxPropDelay | |||
| INTEGER as mscAppnCosTgMinModemClass | |||
| INTEGER as mscAppnCosTgMaxModemClass | |||
| INTEGER as mscAppnCosTgMinUserDefParm1 | |||
| INTEGER as mscAppnCosTgMaxUserDefParm1 | |||
| INTEGER as mscAppnCosTgMinUserDefParm2 | |||
| INTEGER as mscAppnCosTgMaxUserDefParm2 | |||
| INTEGER as mscAppnCosTgMinUserDefParm3 | |||
| INTEGER as mscAppnCosTgMaxUserDefParm3 | |||
| MscAppnCosNodeRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnCosNodeRowStatus | |||
| DisplayString as mscAppnCosNodeComponentName | |||
| StorageType as mscAppnCosNodeStorageType | |||
| Integer32 as mscAppnCosNodeIndex | |||
| MscAppnCosNodeProvEntry | |||
| SEQUENCE | |||
| INTEGER as mscAppnCosNodeMinRouteAddResistance | |||
| INTEGER as mscAppnCosNodeMaxRouteAddResistance | |||
| INTEGER as mscAppnCosNodeMinStatus | |||
| INTEGER as mscAppnCosNodeMaxStatus | |||
| MscAppnFrSvcRowStatusEntry | |||
| SEQUENCE | |||
| RowStatus as mscAppnFrSvcRowStatus | |||
| DisplayString as mscAppnFrSvcComponentName | |||
| StorageType as mscAppnFrSvcStorageType | |||
| NonReplicated as mscAppnFrSvcIndex | |||
| MscAppnFrSvcBanEntry | |||
| SEQUENCE | |||
| DashedHexString as mscAppnFrSvcBanLocalMac | |||
| Hex as mscAppnFrSvcBanLocalSap | |||
| MscAppnFrSvcProvisionedEntry | |||
| SEQUENCE | |||
| Unsigned32 as mscAppnFrSvcMaximumFrameRelaySvcs | |||
| INTEGER as mscAppnFrSvcRateEnforcement | |||
| Unsigned32 as mscAppnFrSvcMaximumCir | |||
| MscAppnFrSvcOperationalEntry | |||
| SEQUENCE | |||
| Gauge32 as mscAppnFrSvcCurrentNumberOfSvcCalls | |||