Nortel-MsCarrier-MscPassport-AtmBearerServiceMIB

File: Nortel-MsCarrier-MscPassport-AtmBearerServiceMIB.mib (65130 bytes)

Imported modules

RFC-1212 Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB
Nortel-MsCarrier-MscPassport-TextualConventionsMIB Nortel-MsCarrier-MscPassport-AtmCoreMIB

Imported symbols

OBJECT-TYPE mscPassportMIBs DisplayString
StorageType RowStatus NonReplicated
Link mscAtmIfVptVcc mscAtmIfVccIndex
mscAtmIfVptIndex mscAtmIfVcc mscAtmIfVpcIndex
mscAtmIfVpc mscAtmIfVptVccIndex mscAtmIfIndex

Defined Objects

mscAtmIfVpcNrp 1.3.6.1.4.1.562.36.2.1.114.4.4
OBJECT IDENTIFIER    

mscAtmIfVpcNrpRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.4.4.1
This entry controls the addition and deletion of mscAtmIfVpcNrp components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVpcNrpRowStatusEntry

mscAtmIfVpcNrpRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.4.4.1.1
A single entry in the table represents a single mscAtmIfVpcNrp component.
OBJECT-TYPE    
  MscAtmIfVpcNrpRowStatusEntry  

mscAtmIfVpcNrpRowStatus 1.3.6.1.4.1.562.36.2.1.114.4.4.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVpcNrp components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfVpcNrpComponentName 1.3.6.1.4.1.562.36.2.1.114.4.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfVpcNrpStorageType 1.3.6.1.4.1.562.36.2.1.114.4.4.1.1.4
This variable represents the storage type value for the mscAtmIfVpcNrp tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfVpcNrpIndex 1.3.6.1.4.1.562.36.2.1.114.4.4.1.1.10
This variable represents the index for the mscAtmIfVpcNrp tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVpcNrpProvTable 1.3.6.1.4.1.562.36.2.1.114.4.4.100
This group contains the provisionable attributes for the Nrp component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVpcNrpProvEntry

mscAtmIfVpcNrpProvEntry 1.3.6.1.4.1.562.36.2.1.114.4.4.100.1
An entry in the mscAtmIfVpcNrpProvTable.
OBJECT-TYPE    
  MscAtmIfVpcNrpProvEntry  

mscAtmIfVpcNrpNextHop 1.3.6.1.4.1.562.36.2.1.114.4.4.100.1.10
This attribute specifies the Nrp component with which this Nrp is associated. A sample value is AtmIf/31 Vcc/0.32 Nrp.
OBJECT-TYPE    
  Link  

mscAtmIfVpcNrpConnectionPointType 1.3.6.1.4.1.562.36.2.1.114.4.4.100.1.20
This attribute specifies the connection point type desired for a Nrp component. The actual connection point type value is visible in the parent component's connectionPointType attribute. The desired connection point type can be specified directly as a segmentEndPoint or connectingPoint. If autoConfigure is specified, the switch will select the connection point type based on the type attribute of the associated AtmIf, choosing segmentEndPoint for a UNI-type ATM interface and connectingPoint for a PPI-type ATM interface. It is obsoleted. The value is mapped into oamSegmentBoundary attribute. segmentEndPoint is mapped into yes. connectingPoint is mapped into no. autoConfigure is mapped into sameAsInterface.
OBJECT-TYPE    
  INTEGER segmentEndPoint(1), connectingPoint(2), autoConfigure(4)  

mscAtmIfVpcNrpOamSegmentBoundary 1.3.6.1.4.1.562.36.2.1.114.4.4.100.1.30
This attribute specifies the OAM segment boundary desired for a Nrp component. It affects the connection point type value visible in the parent component's connectionPointType attribute. The desired OAM segment boundary can be specified directly as yes, no or sameAsInterface. If sameAsInterface is specified, the OAM segment boundary is same as the oamSegmentBoundary attribute of the associated AtmIf and the switch will set the connectionPointType, choosing segmentEndPoint for a segment- boundary ATM interface and connectingPoint for a non-segment- boundary ATM interface.
OBJECT-TYPE    
  INTEGER no(0), yes(1), sameAsInterface(2)  

mscAtmIfVpcNrpTxAal5PartialPacketDiscard 1.3.6.1.4.1.562.36.2.1.114.4.4.100.1.31
This attribute is obsolete in P4.2 and has been migrated under Vcd (Vpd) component. This attribute specifies whether the AAL5 Partial Packet Discard (PPD) feature has been enabled or disabled on the Nrp in the transmit direction. This feature allows the NRP to discard the remainder of a cell-forwarded AAL5 frame if a cell of this frame has been discarded due to congestion. This increases the 'goodput' of the link, since cells which are only going to be discarded by the AAL5 reassembly are not transmitted. When this attribute is set to enabled, the PPD feature is applied in the transmit direction. It should only be enabled for connections whose end points are performing AAL5 segmentation and reassembly. When this attribute is set to disabled, the PPD feature is not applied to traffic for this connection in the transmit direction. Note that specifying enabled for a non-AAL5 connection will cause all traffic to be discarded once congestion is encountered.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscAtmIfVpcNrpRxAal5PartialPacketDiscard 1.3.6.1.4.1.562.36.2.1.114.4.4.100.1.32
This attribute is obsolete in P4.2 and has been migrated under Vcd (Vpd) component. This attribute specifies whether the AAL5 Partial Packet Discard (PPD) feature has been enabled or disabled on the Nrp in the receive direction. This feature allows the NRP to discard the remainder of a cell-forwarded AAL5 frame if a cell of this frame has been discarded due to congestion or usage parameter control (UPC). This increases the 'goodput' of the link, since cells which are only going to be discarded by the AAL5 reassembly are not transmitted. When this attribute is set to enabled, the PPD feature is applied in the receive direction. It should only be enabled for connections whose end points are performing AAL5 segmentation and reassembly. When this attribute is set to disabled, the PPD feature is not applied to traffic for this connection in the receive direction. When this attribute is set to sameAsTx, the PPD feature for traffic in the receive direction will be configured the same way as it is in the transmit direction. Note that specifying enabled for a non-AAL5 connection will cause all traffic to be discarded once congestion is encountered.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1), sameAsTx(2)  

mscAtmIfVpcNrpBandwidthElastic 1.3.6.1.4.1.562.36.2.1.114.4.4.100.1.33
This attribute is only of importance for connections which are carried on a link with a variable bandwidth. For example, the bandwidth may be reduced in the event that one or more physical links in the IMA group fail, such that the originally requested bandwidth cannot be maintained. This attribute shows whether the application running on this connection can continue to operate if the bandwidth is reduced. If the bandwidth is reduced, the amount by which it is reduced will be displayed in the bandwidthReduction attribute. A value of yes, indicates that this connection is elastic, and the bandwidth may be reduced but the connection will not be released. Currently, this attribute should only be set to yes for situations where this Nrp is functioning as a loopback on one side of an IMA link. There are no other situations where this setting is valid. A value of no indicates that the bandwidth for this connection will not be reduced in the event of link bandwidth reduction. However, this connection may be released based on its holdingPriority.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscAtmIfVpcNrpOverrideHoldingPriority 1.3.6.1.4.1.562.36.2.1.114.4.4.100.1.34
This attribute specifies the holding priority of this connection. Holding priority is used when there is an IMA group where some physical links have failed. Holding priority determines the order in which connections are released. 4 is the lowest holding priority and is released first. 0 is a higher priority and is released last. The value specified in this attribute will override whatever holdingPriority that has been provisioned at the Vcd (or Vpd). If the value is left at the default of noOverride, the holdingPriority provisioned at the Vcd (or Vpd) will be used.
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4), noOverride(6)  

mscAtmIfVpcMnrp 1.3.6.1.4.1.562.36.2.1.114.4.12
OBJECT IDENTIFIER    

mscAtmIfVpcMnrpRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.4.12.1
This entry controls the addition and deletion of mscAtmIfVpcMnrp components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVpcMnrpRowStatusEntry

mscAtmIfVpcMnrpRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.4.12.1.1
A single entry in the table represents a single mscAtmIfVpcMnrp component.
OBJECT-TYPE    
  MscAtmIfVpcMnrpRowStatusEntry  

mscAtmIfVpcMnrpRowStatus 1.3.6.1.4.1.562.36.2.1.114.4.12.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVpcMnrp components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfVpcMnrpComponentName 1.3.6.1.4.1.562.36.2.1.114.4.12.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfVpcMnrpStorageType 1.3.6.1.4.1.562.36.2.1.114.4.12.1.1.4
This variable represents the storage type value for the mscAtmIfVpcMnrp tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfVpcMnrpIndex 1.3.6.1.4.1.562.36.2.1.114.4.12.1.1.10
This variable represents the index for the mscAtmIfVpcMnrp tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVpcMnrpProvTable 1.3.6.1.4.1.562.36.2.1.114.4.12.101
This group contains the provisionable attributes for the Mnrp component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVpcMnrpProvEntry

mscAtmIfVpcMnrpProvEntry 1.3.6.1.4.1.562.36.2.1.114.4.12.101.1
An entry in the mscAtmIfVpcMnrpProvTable.
OBJECT-TYPE    
  MscAtmIfVpcMnrpProvEntry  

mscAtmIfVpcMnrpOamSegmentBoundary 1.3.6.1.4.1.562.36.2.1.114.4.12.101.1.30
This attribute specifies the OAM segment boundary desired for a Mnrp component. It affects the connection point type value visible in the parent component's connectionPointType attribute. The desired OAM segment boundary can be specified directly as yes, no or sameAsInterface. If sameAsInterface is specified, the OAM segment boundary is same as the oamSegmentBoundary attribute of the associated AtmIf and the switch will set the connectionPointType, choosing segmentEndPoint for a segment- boundary ATM interface and connectingPoint for a non-segment- boundary ATM interface.
OBJECT-TYPE    
  INTEGER no(0), yes(1), sameAsInterface(2)  

mscAtmIfVpcMnrpBandwidthElastic 1.3.6.1.4.1.562.36.2.1.114.4.12.101.1.33
This attribute is only of importance for connections which are carried on a link with a variable bandwidth. For example, the bandwidth may be reduced in the event that one or more physical links in the IMA group fail, such that the originally requested bandwidth cannot be maintained. This attribute shows whether the application running on this connection can continue to operate if the bandwidth is reduced. If the bandwidth is reduced, the amount by which it is reduced will be displayed in the bandwidthReduction attribute. A value of yes, indicates that this connection is elastic, and the bandwidth may be reduced but the connection will not be released. Currently, this attribute should only be set to yes for situations where this Mnrp is functioning as a loopback on one side of an IMA link. There are no other situations where this setting is valid. A value of no indicates that the bandwidth for this connection will not be reduced in the event of link bandwidth reduction. However, this connection may be released based on its holdingPriority.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscAtmIfVpcMnrpOverrideHoldingPriority 1.3.6.1.4.1.562.36.2.1.114.4.12.101.1.34
This attribute specifies the holding priority of this connection. Holding priority is used when there is an IMA group where some physical links have failed. Holding priority determines the order in which connections are released. 4 is the lowest holding priority and is released first. 0 is a higher priority and is released last. The value specified in this attribute will override whatever holdingPriority that has been provisioned at the Vcd (or Vpd). If the value is left at the default of noOverride, the holdingPriority provisioned at the Vcd (or Vpd) will be used.
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4), noOverride(6)  

mscAtmIfVpcMnrpNextHopsTable 1.3.6.1.4.1.562.36.2.1.114.4.12.658
This attribute specifies the list of Nrp components with which this Mnrp is associated. A sample value is AtmIf/31 Vcc/0.32 Nrp. This attribute must be provisioned with at least one Nrp component under a compatible connection type.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVpcMnrpNextHopsEntry

mscAtmIfVpcMnrpNextHopsEntry 1.3.6.1.4.1.562.36.2.1.114.4.12.658.1
An entry in the mscAtmIfVpcMnrpNextHopsTable.
OBJECT-TYPE    
  MscAtmIfVpcMnrpNextHopsEntry  

mscAtmIfVpcMnrpNextHopsValue 1.3.6.1.4.1.562.36.2.1.114.4.12.658.1.1
This variable represents both the value and the index for the mscAtmIfVpcMnrpNextHopsTable.
OBJECT-TYPE    
  Link  

mscAtmIfVpcMnrpNextHopsRowStatus 1.3.6.1.4.1.562.36.2.1.114.4.12.658.1.2
This variable is used to control the addition and deletion of individual values of the mscAtmIfVpcMnrpNextHopsTable.
OBJECT-TYPE    
  RowStatus  

mscAtmIfVccNrp 1.3.6.1.4.1.562.36.2.1.114.5.4
OBJECT IDENTIFIER    

mscAtmIfVccNrpRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.5.4.1
This entry controls the addition and deletion of mscAtmIfVccNrp components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVccNrpRowStatusEntry

mscAtmIfVccNrpRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.5.4.1.1
A single entry in the table represents a single mscAtmIfVccNrp component.
OBJECT-TYPE    
  MscAtmIfVccNrpRowStatusEntry  

mscAtmIfVccNrpRowStatus 1.3.6.1.4.1.562.36.2.1.114.5.4.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVccNrp components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfVccNrpComponentName 1.3.6.1.4.1.562.36.2.1.114.5.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfVccNrpStorageType 1.3.6.1.4.1.562.36.2.1.114.5.4.1.1.4
This variable represents the storage type value for the mscAtmIfVccNrp tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfVccNrpIndex 1.3.6.1.4.1.562.36.2.1.114.5.4.1.1.10
This variable represents the index for the mscAtmIfVccNrp tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVccNrpProvTable 1.3.6.1.4.1.562.36.2.1.114.5.4.100
This group contains the provisionable attributes for the Nrp component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVccNrpProvEntry

mscAtmIfVccNrpProvEntry 1.3.6.1.4.1.562.36.2.1.114.5.4.100.1
An entry in the mscAtmIfVccNrpProvTable.
OBJECT-TYPE    
  MscAtmIfVccNrpProvEntry  

mscAtmIfVccNrpNextHop 1.3.6.1.4.1.562.36.2.1.114.5.4.100.1.10
This attribute specifies the Nrp component with which this Nrp is associated. A sample value is AtmIf/31 Vcc/0.32 Nrp.
OBJECT-TYPE    
  Link  

mscAtmIfVccNrpConnectionPointType 1.3.6.1.4.1.562.36.2.1.114.5.4.100.1.20
This attribute specifies the connection point type desired for a Nrp component. The actual connection point type value is visible in the parent component's connectionPointType attribute. The desired connection point type can be specified directly as a segmentEndPoint or connectingPoint. If autoConfigure is specified, the switch will select the connection point type based on the type attribute of the associated AtmIf, choosing segmentEndPoint for a UNI-type ATM interface and connectingPoint for a PPI-type ATM interface. It is obsoleted. The value is mapped into oamSegmentBoundary attribute. segmentEndPoint is mapped into yes. connectingPoint is mapped into no. autoConfigure is mapped into sameAsInterface.
OBJECT-TYPE    
  INTEGER segmentEndPoint(1), connectingPoint(2), autoConfigure(4)  

mscAtmIfVccNrpOamSegmentBoundary 1.3.6.1.4.1.562.36.2.1.114.5.4.100.1.30
This attribute specifies the OAM segment boundary desired for a Nrp component. It affects the connection point type value visible in the parent component's connectionPointType attribute. The desired OAM segment boundary can be specified directly as yes, no or sameAsInterface. If sameAsInterface is specified, the OAM segment boundary is same as the oamSegmentBoundary attribute of the associated AtmIf and the switch will set the connectionPointType, choosing segmentEndPoint for a segment- boundary ATM interface and connectingPoint for a non-segment- boundary ATM interface.
OBJECT-TYPE    
  INTEGER no(0), yes(1), sameAsInterface(2)  

mscAtmIfVccNrpTxAal5PartialPacketDiscard 1.3.6.1.4.1.562.36.2.1.114.5.4.100.1.31
This attribute is obsolete in P4.2 and has been migrated under Vcd (Vpd) component. This attribute specifies whether the AAL5 Partial Packet Discard (PPD) feature has been enabled or disabled on the Nrp in the transmit direction. This feature allows the NRP to discard the remainder of a cell-forwarded AAL5 frame if a cell of this frame has been discarded due to congestion. This increases the 'goodput' of the link, since cells which are only going to be discarded by the AAL5 reassembly are not transmitted. When this attribute is set to enabled, the PPD feature is applied in the transmit direction. It should only be enabled for connections whose end points are performing AAL5 segmentation and reassembly. When this attribute is set to disabled, the PPD feature is not applied to traffic for this connection in the transmit direction. Note that specifying enabled for a non-AAL5 connection will cause all traffic to be discarded once congestion is encountered.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscAtmIfVccNrpRxAal5PartialPacketDiscard 1.3.6.1.4.1.562.36.2.1.114.5.4.100.1.32
This attribute is obsolete in P4.2 and has been migrated under Vcd (Vpd) component. This attribute specifies whether the AAL5 Partial Packet Discard (PPD) feature has been enabled or disabled on the Nrp in the receive direction. This feature allows the NRP to discard the remainder of a cell-forwarded AAL5 frame if a cell of this frame has been discarded due to congestion or usage parameter control (UPC). This increases the 'goodput' of the link, since cells which are only going to be discarded by the AAL5 reassembly are not transmitted. When this attribute is set to enabled, the PPD feature is applied in the receive direction. It should only be enabled for connections whose end points are performing AAL5 segmentation and reassembly. When this attribute is set to disabled, the PPD feature is not applied to traffic for this connection in the receive direction. When this attribute is set to sameAsTx, the PPD feature for traffic in the receive direction will be configured the same way as it is in the transmit direction. Note that specifying enabled for a non-AAL5 connection will cause all traffic to be discarded once congestion is encountered.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1), sameAsTx(2)  

mscAtmIfVccNrpBandwidthElastic 1.3.6.1.4.1.562.36.2.1.114.5.4.100.1.33
This attribute is only of importance for connections which are carried on a link with a variable bandwidth. For example, the bandwidth may be reduced in the event that one or more physical links in the IMA group fail, such that the originally requested bandwidth cannot be maintained. This attribute shows whether the application running on this connection can continue to operate if the bandwidth is reduced. If the bandwidth is reduced, the amount by which it is reduced will be displayed in the bandwidthReduction attribute. A value of yes, indicates that this connection is elastic, and the bandwidth may be reduced but the connection will not be released. Currently, this attribute should only be set to yes for situations where this Nrp is functioning as a loopback on one side of an IMA link. There are no other situations where this setting is valid. A value of no indicates that the bandwidth for this connection will not be reduced in the event of link bandwidth reduction. However, this connection may be released based on its holdingPriority.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscAtmIfVccNrpOverrideHoldingPriority 1.3.6.1.4.1.562.36.2.1.114.5.4.100.1.34
This attribute specifies the holding priority of this connection. Holding priority is used when there is an IMA group where some physical links have failed. Holding priority determines the order in which connections are released. 4 is the lowest holding priority and is released first. 0 is a higher priority and is released last. The value specified in this attribute will override whatever holdingPriority that has been provisioned at the Vcd (or Vpd). If the value is left at the default of noOverride, the holdingPriority provisioned at the Vcd (or Vpd) will be used.
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4), noOverride(6)  

mscAtmIfVccMnrp 1.3.6.1.4.1.562.36.2.1.114.5.13
OBJECT IDENTIFIER    

mscAtmIfVccMnrpRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.5.13.1
This entry controls the addition and deletion of mscAtmIfVccMnrp components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVccMnrpRowStatusEntry

mscAtmIfVccMnrpRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.5.13.1.1
A single entry in the table represents a single mscAtmIfVccMnrp component.
OBJECT-TYPE    
  MscAtmIfVccMnrpRowStatusEntry  

mscAtmIfVccMnrpRowStatus 1.3.6.1.4.1.562.36.2.1.114.5.13.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVccMnrp components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfVccMnrpComponentName 1.3.6.1.4.1.562.36.2.1.114.5.13.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfVccMnrpStorageType 1.3.6.1.4.1.562.36.2.1.114.5.13.1.1.4
This variable represents the storage type value for the mscAtmIfVccMnrp tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfVccMnrpIndex 1.3.6.1.4.1.562.36.2.1.114.5.13.1.1.10
This variable represents the index for the mscAtmIfVccMnrp tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVccMnrpProvTable 1.3.6.1.4.1.562.36.2.1.114.5.13.101
This group contains the provisionable attributes for the Mnrp component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVccMnrpProvEntry

mscAtmIfVccMnrpProvEntry 1.3.6.1.4.1.562.36.2.1.114.5.13.101.1
An entry in the mscAtmIfVccMnrpProvTable.
OBJECT-TYPE    
  MscAtmIfVccMnrpProvEntry  

mscAtmIfVccMnrpOamSegmentBoundary 1.3.6.1.4.1.562.36.2.1.114.5.13.101.1.30
This attribute specifies the OAM segment boundary desired for a Mnrp component. It affects the connection point type value visible in the parent component's connectionPointType attribute. The desired OAM segment boundary can be specified directly as yes, no or sameAsInterface. If sameAsInterface is specified, the OAM segment boundary is same as the oamSegmentBoundary attribute of the associated AtmIf and the switch will set the connectionPointType, choosing segmentEndPoint for a segment- boundary ATM interface and connectingPoint for a non-segment- boundary ATM interface.
OBJECT-TYPE    
  INTEGER no(0), yes(1), sameAsInterface(2)  

mscAtmIfVccMnrpBandwidthElastic 1.3.6.1.4.1.562.36.2.1.114.5.13.101.1.33
This attribute is only of importance for connections which are carried on a link with a variable bandwidth. For example, the bandwidth may be reduced in the event that one or more physical links in the IMA group fail, such that the originally requested bandwidth cannot be maintained. This attribute shows whether the application running on this connection can continue to operate if the bandwidth is reduced. If the bandwidth is reduced, the amount by which it is reduced will be displayed in the bandwidthReduction attribute. A value of yes, indicates that this connection is elastic, and the bandwidth may be reduced but the connection will not be released. Currently, this attribute should only be set to yes for situations where this Mnrp is functioning as a loopback on one side of an IMA link. There are no other situations where this setting is valid. A value of no indicates that the bandwidth for this connection will not be reduced in the event of link bandwidth reduction. However, this connection may be released based on its holdingPriority.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscAtmIfVccMnrpOverrideHoldingPriority 1.3.6.1.4.1.562.36.2.1.114.5.13.101.1.34
This attribute specifies the holding priority of this connection. Holding priority is used when there is an IMA group where some physical links have failed. Holding priority determines the order in which connections are released. 4 is the lowest holding priority and is released first. 0 is a higher priority and is released last. The value specified in this attribute will override whatever holdingPriority that has been provisioned at the Vcd (or Vpd). If the value is left at the default of noOverride, the holdingPriority provisioned at the Vcd (or Vpd) will be used.
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4), noOverride(6)  

mscAtmIfVccMnrpNextHopsTable 1.3.6.1.4.1.562.36.2.1.114.5.13.658
This attribute specifies the list of Nrp components with which this Mnrp is associated. A sample value is AtmIf/31 Vcc/0.32 Nrp. This attribute must be provisioned with at least one Nrp component under a compatible connection type.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVccMnrpNextHopsEntry

mscAtmIfVccMnrpNextHopsEntry 1.3.6.1.4.1.562.36.2.1.114.5.13.658.1
An entry in the mscAtmIfVccMnrpNextHopsTable.
OBJECT-TYPE    
  MscAtmIfVccMnrpNextHopsEntry  

mscAtmIfVccMnrpNextHopsValue 1.3.6.1.4.1.562.36.2.1.114.5.13.658.1.1
This variable represents both the value and the index for the mscAtmIfVccMnrpNextHopsTable.
OBJECT-TYPE    
  Link  

mscAtmIfVccMnrpNextHopsRowStatus 1.3.6.1.4.1.562.36.2.1.114.5.13.658.1.2
This variable is used to control the addition and deletion of individual values of the mscAtmIfVccMnrpNextHopsTable.
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptVccNrp 1.3.6.1.4.1.562.36.2.1.114.9.20.4
OBJECT IDENTIFIER    

mscAtmIfVptVccNrpRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.20.4.1
This entry controls the addition and deletion of mscAtmIfVptVccNrp components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptVccNrpRowStatusEntry

mscAtmIfVptVccNrpRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.20.4.1.1
A single entry in the table represents a single mscAtmIfVptVccNrp component.
OBJECT-TYPE    
  MscAtmIfVptVccNrpRowStatusEntry  

mscAtmIfVptVccNrpRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.20.4.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptVccNrp components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptVccNrpComponentName 1.3.6.1.4.1.562.36.2.1.114.9.20.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptVccNrpStorageType 1.3.6.1.4.1.562.36.2.1.114.9.20.4.1.1.4
This variable represents the storage type value for the mscAtmIfVptVccNrp tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfVptVccNrpIndex 1.3.6.1.4.1.562.36.2.1.114.9.20.4.1.1.10
This variable represents the index for the mscAtmIfVptVccNrp tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVptVccNrpProvTable 1.3.6.1.4.1.562.36.2.1.114.9.20.4.100
This group contains the provisionable attributes for the Nrp component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptVccNrpProvEntry

mscAtmIfVptVccNrpProvEntry 1.3.6.1.4.1.562.36.2.1.114.9.20.4.100.1
An entry in the mscAtmIfVptVccNrpProvTable.
OBJECT-TYPE    
  MscAtmIfVptVccNrpProvEntry  

mscAtmIfVptVccNrpNextHop 1.3.6.1.4.1.562.36.2.1.114.9.20.4.100.1.10
This attribute specifies the Nrp component with which this Nrp is associated. A sample value is AtmIf/31 Vcc/0.32 Nrp.
OBJECT-TYPE    
  Link  

mscAtmIfVptVccNrpConnectionPointType 1.3.6.1.4.1.562.36.2.1.114.9.20.4.100.1.20
This attribute specifies the connection point type desired for a Nrp component. The actual connection point type value is visible in the parent component's connectionPointType attribute. The desired connection point type can be specified directly as a segmentEndPoint or connectingPoint. If autoConfigure is specified, the switch will select the connection point type based on the type attribute of the associated AtmIf, choosing segmentEndPoint for a UNI-type ATM interface and connectingPoint for a PPI-type ATM interface. It is obsoleted. The value is mapped into oamSegmentBoundary attribute. segmentEndPoint is mapped into yes. connectingPoint is mapped into no. autoConfigure is mapped into sameAsInterface.
OBJECT-TYPE    
  INTEGER segmentEndPoint(1), connectingPoint(2), autoConfigure(4)  

mscAtmIfVptVccNrpOamSegmentBoundary 1.3.6.1.4.1.562.36.2.1.114.9.20.4.100.1.30
This attribute specifies the OAM segment boundary desired for a Nrp component. It affects the connection point type value visible in the parent component's connectionPointType attribute. The desired OAM segment boundary can be specified directly as yes, no or sameAsInterface. If sameAsInterface is specified, the OAM segment boundary is same as the oamSegmentBoundary attribute of the associated AtmIf and the switch will set the connectionPointType, choosing segmentEndPoint for a segment- boundary ATM interface and connectingPoint for a non-segment- boundary ATM interface.
OBJECT-TYPE    
  INTEGER no(0), yes(1), sameAsInterface(2)  

mscAtmIfVptVccNrpTxAal5PartialPacketDiscard 1.3.6.1.4.1.562.36.2.1.114.9.20.4.100.1.31
This attribute is obsolete in P4.2 and has been migrated under Vcd (Vpd) component. This attribute specifies whether the AAL5 Partial Packet Discard (PPD) feature has been enabled or disabled on the Nrp in the transmit direction. This feature allows the NRP to discard the remainder of a cell-forwarded AAL5 frame if a cell of this frame has been discarded due to congestion. This increases the 'goodput' of the link, since cells which are only going to be discarded by the AAL5 reassembly are not transmitted. When this attribute is set to enabled, the PPD feature is applied in the transmit direction. It should only be enabled for connections whose end points are performing AAL5 segmentation and reassembly. When this attribute is set to disabled, the PPD feature is not applied to traffic for this connection in the transmit direction. Note that specifying enabled for a non-AAL5 connection will cause all traffic to be discarded once congestion is encountered.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscAtmIfVptVccNrpRxAal5PartialPacketDiscard 1.3.6.1.4.1.562.36.2.1.114.9.20.4.100.1.32
This attribute is obsolete in P4.2 and has been migrated under Vcd (Vpd) component. This attribute specifies whether the AAL5 Partial Packet Discard (PPD) feature has been enabled or disabled on the Nrp in the receive direction. This feature allows the NRP to discard the remainder of a cell-forwarded AAL5 frame if a cell of this frame has been discarded due to congestion or usage parameter control (UPC). This increases the 'goodput' of the link, since cells which are only going to be discarded by the AAL5 reassembly are not transmitted. When this attribute is set to enabled, the PPD feature is applied in the receive direction. It should only be enabled for connections whose end points are performing AAL5 segmentation and reassembly. When this attribute is set to disabled, the PPD feature is not applied to traffic for this connection in the receive direction. When this attribute is set to sameAsTx, the PPD feature for traffic in the receive direction will be configured the same way as it is in the transmit direction. Note that specifying enabled for a non-AAL5 connection will cause all traffic to be discarded once congestion is encountered.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1), sameAsTx(2)  

mscAtmIfVptVccNrpBandwidthElastic 1.3.6.1.4.1.562.36.2.1.114.9.20.4.100.1.33
This attribute is only of importance for connections which are carried on a link with a variable bandwidth. For example, the bandwidth may be reduced in the event that one or more physical links in the IMA group fail, such that the originally requested bandwidth cannot be maintained. This attribute shows whether the application running on this connection can continue to operate if the bandwidth is reduced. If the bandwidth is reduced, the amount by which it is reduced will be displayed in the bandwidthReduction attribute. A value of yes, indicates that this connection is elastic, and the bandwidth may be reduced but the connection will not be released. Currently, this attribute should only be set to yes for situations where this Nrp is functioning as a loopback on one side of an IMA link. There are no other situations where this setting is valid. A value of no indicates that the bandwidth for this connection will not be reduced in the event of link bandwidth reduction. However, this connection may be released based on its holdingPriority.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscAtmIfVptVccNrpOverrideHoldingPriority 1.3.6.1.4.1.562.36.2.1.114.9.20.4.100.1.34
This attribute specifies the holding priority of this connection. Holding priority is used when there is an IMA group where some physical links have failed. Holding priority determines the order in which connections are released. 4 is the lowest holding priority and is released first. 0 is a higher priority and is released last. The value specified in this attribute will override whatever holdingPriority that has been provisioned at the Vcd (or Vpd). If the value is left at the default of noOverride, the holdingPriority provisioned at the Vcd (or Vpd) will be used.
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4), noOverride(6)  

mscAtmIfVptVccMnrp 1.3.6.1.4.1.562.36.2.1.114.9.20.13
OBJECT IDENTIFIER    

mscAtmIfVptVccMnrpRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.20.13.1
This entry controls the addition and deletion of mscAtmIfVptVccMnrp components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptVccMnrpRowStatusEntry

mscAtmIfVptVccMnrpRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.20.13.1.1
A single entry in the table represents a single mscAtmIfVptVccMnrp component.
OBJECT-TYPE    
  MscAtmIfVptVccMnrpRowStatusEntry  

mscAtmIfVptVccMnrpRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.20.13.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptVccMnrp components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptVccMnrpComponentName 1.3.6.1.4.1.562.36.2.1.114.9.20.13.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptVccMnrpStorageType 1.3.6.1.4.1.562.36.2.1.114.9.20.13.1.1.4
This variable represents the storage type value for the mscAtmIfVptVccMnrp tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfVptVccMnrpIndex 1.3.6.1.4.1.562.36.2.1.114.9.20.13.1.1.10
This variable represents the index for the mscAtmIfVptVccMnrp tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVptVccMnrpProvTable 1.3.6.1.4.1.562.36.2.1.114.9.20.13.101
This group contains the provisionable attributes for the Mnrp component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptVccMnrpProvEntry

mscAtmIfVptVccMnrpProvEntry 1.3.6.1.4.1.562.36.2.1.114.9.20.13.101.1
An entry in the mscAtmIfVptVccMnrpProvTable.
OBJECT-TYPE    
  MscAtmIfVptVccMnrpProvEntry  

mscAtmIfVptVccMnrpOamSegmentBoundary 1.3.6.1.4.1.562.36.2.1.114.9.20.13.101.1.30
This attribute specifies the OAM segment boundary desired for a Mnrp component. It affects the connection point type value visible in the parent component's connectionPointType attribute. The desired OAM segment boundary can be specified directly as yes, no or sameAsInterface. If sameAsInterface is specified, the OAM segment boundary is same as the oamSegmentBoundary attribute of the associated AtmIf and the switch will set the connectionPointType, choosing segmentEndPoint for a segment- boundary ATM interface and connectingPoint for a non-segment- boundary ATM interface.
OBJECT-TYPE    
  INTEGER no(0), yes(1), sameAsInterface(2)  

mscAtmIfVptVccMnrpBandwidthElastic 1.3.6.1.4.1.562.36.2.1.114.9.20.13.101.1.33
This attribute is only of importance for connections which are carried on a link with a variable bandwidth. For example, the bandwidth may be reduced in the event that one or more physical links in the IMA group fail, such that the originally requested bandwidth cannot be maintained. This attribute shows whether the application running on this connection can continue to operate if the bandwidth is reduced. If the bandwidth is reduced, the amount by which it is reduced will be displayed in the bandwidthReduction attribute. A value of yes, indicates that this connection is elastic, and the bandwidth may be reduced but the connection will not be released. Currently, this attribute should only be set to yes for situations where this Mnrp is functioning as a loopback on one side of an IMA link. There are no other situations where this setting is valid. A value of no indicates that the bandwidth for this connection will not be reduced in the event of link bandwidth reduction. However, this connection may be released based on its holdingPriority.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscAtmIfVptVccMnrpOverrideHoldingPriority 1.3.6.1.4.1.562.36.2.1.114.9.20.13.101.1.34
This attribute specifies the holding priority of this connection. Holding priority is used when there is an IMA group where some physical links have failed. Holding priority determines the order in which connections are released. 4 is the lowest holding priority and is released first. 0 is a higher priority and is released last. The value specified in this attribute will override whatever holdingPriority that has been provisioned at the Vcd (or Vpd). If the value is left at the default of noOverride, the holdingPriority provisioned at the Vcd (or Vpd) will be used.
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4), noOverride(6)  

mscAtmIfVptVccMnrpNextHopsTable 1.3.6.1.4.1.562.36.2.1.114.9.20.13.658
This attribute specifies the list of Nrp components with which this Mnrp is associated. A sample value is AtmIf/31 Vcc/0.32 Nrp. This attribute must be provisioned with at least one Nrp component under a compatible connection type.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptVccMnrpNextHopsEntry

mscAtmIfVptVccMnrpNextHopsEntry 1.3.6.1.4.1.562.36.2.1.114.9.20.13.658.1
An entry in the mscAtmIfVptVccMnrpNextHopsTable.
OBJECT-TYPE    
  MscAtmIfVptVccMnrpNextHopsEntry  

mscAtmIfVptVccMnrpNextHopsValue 1.3.6.1.4.1.562.36.2.1.114.9.20.13.658.1.1
This variable represents both the value and the index for the mscAtmIfVptVccMnrpNextHopsTable.
OBJECT-TYPE    
  Link  

mscAtmIfVptVccMnrpNextHopsRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.20.13.658.1.2
This variable is used to control the addition and deletion of individual values of the mscAtmIfVptVccMnrpNextHopsTable.
OBJECT-TYPE    
  RowStatus  

atmBearerServiceMIB 1.3.6.1.4.1.562.36.2.2.64
OBJECT IDENTIFIER    

atmBearerServiceGroup 1.3.6.1.4.1.562.36.2.2.64.1
OBJECT IDENTIFIER    

atmBearerServiceGroupCA 1.3.6.1.4.1.562.36.2.2.64.1.1
OBJECT IDENTIFIER    

atmBearerServiceGroupCA02 1.3.6.1.4.1.562.36.2.2.64.1.1.3
OBJECT IDENTIFIER    

atmBearerServiceGroupCA02A 1.3.6.1.4.1.562.36.2.2.64.1.1.3.2
OBJECT IDENTIFIER    

atmBearerServiceCapabilities 1.3.6.1.4.1.562.36.2.2.64.3
OBJECT IDENTIFIER    

atmBearerServiceCapabilitiesCA 1.3.6.1.4.1.562.36.2.2.64.3.1
OBJECT IDENTIFIER    

atmBearerServiceCapabilitiesCA02 1.3.6.1.4.1.562.36.2.2.64.3.1.3
OBJECT IDENTIFIER    

atmBearerServiceCapabilitiesCA02A 1.3.6.1.4.1.562.36.2.2.64.3.1.3.2
OBJECT IDENTIFIER    

Defined Objects

MscAtmIfVpcNrpRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfVpcNrpRowStatus  
  DisplayString as mscAtmIfVpcNrpComponentName  
  StorageType as mscAtmIfVpcNrpStorageType  
  NonReplicated as mscAtmIfVpcNrpIndex  

MscAtmIfVpcNrpProvEntry  
SEQUENCE    
  Link as mscAtmIfVpcNrpNextHop  
  INTEGER as mscAtmIfVpcNrpConnectionPointType  
  INTEGER as mscAtmIfVpcNrpOamSegmentBoundary  
  INTEGER as mscAtmIfVpcNrpTxAal5PartialPacketDiscard  
  INTEGER as mscAtmIfVpcNrpRxAal5PartialPacketDiscard  
  INTEGER as mscAtmIfVpcNrpBandwidthElastic  
  INTEGER as mscAtmIfVpcNrpOverrideHoldingPriority  

MscAtmIfVpcMnrpRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfVpcMnrpRowStatus  
  DisplayString as mscAtmIfVpcMnrpComponentName  
  StorageType as mscAtmIfVpcMnrpStorageType  
  NonReplicated as mscAtmIfVpcMnrpIndex  

MscAtmIfVpcMnrpProvEntry  
SEQUENCE    
  INTEGER as mscAtmIfVpcMnrpOamSegmentBoundary  
  INTEGER as mscAtmIfVpcMnrpBandwidthElastic  
  INTEGER as mscAtmIfVpcMnrpOverrideHoldingPriority  

MscAtmIfVpcMnrpNextHopsEntry  
SEQUENCE    
  Link as mscAtmIfVpcMnrpNextHopsValue  
  RowStatus as mscAtmIfVpcMnrpNextHopsRowStatus  

MscAtmIfVccNrpRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfVccNrpRowStatus  
  DisplayString as mscAtmIfVccNrpComponentName  
  StorageType as mscAtmIfVccNrpStorageType  
  NonReplicated as mscAtmIfVccNrpIndex  

MscAtmIfVccNrpProvEntry  
SEQUENCE    
  Link as mscAtmIfVccNrpNextHop  
  INTEGER as mscAtmIfVccNrpConnectionPointType  
  INTEGER as mscAtmIfVccNrpOamSegmentBoundary  
  INTEGER as mscAtmIfVccNrpTxAal5PartialPacketDiscard  
  INTEGER as mscAtmIfVccNrpRxAal5PartialPacketDiscard  
  INTEGER as mscAtmIfVccNrpBandwidthElastic  
  INTEGER as mscAtmIfVccNrpOverrideHoldingPriority  

MscAtmIfVccMnrpRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfVccMnrpRowStatus  
  DisplayString as mscAtmIfVccMnrpComponentName  
  StorageType as mscAtmIfVccMnrpStorageType  
  NonReplicated as mscAtmIfVccMnrpIndex  

MscAtmIfVccMnrpProvEntry  
SEQUENCE    
  INTEGER as mscAtmIfVccMnrpOamSegmentBoundary  
  INTEGER as mscAtmIfVccMnrpBandwidthElastic  
  INTEGER as mscAtmIfVccMnrpOverrideHoldingPriority  

MscAtmIfVccMnrpNextHopsEntry  
SEQUENCE    
  Link as mscAtmIfVccMnrpNextHopsValue  
  RowStatus as mscAtmIfVccMnrpNextHopsRowStatus  

MscAtmIfVptVccNrpRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfVptVccNrpRowStatus  
  DisplayString as mscAtmIfVptVccNrpComponentName  
  StorageType as mscAtmIfVptVccNrpStorageType  
  NonReplicated as mscAtmIfVptVccNrpIndex  

MscAtmIfVptVccNrpProvEntry  
SEQUENCE    
  Link as mscAtmIfVptVccNrpNextHop  
  INTEGER as mscAtmIfVptVccNrpConnectionPointType  
  INTEGER as mscAtmIfVptVccNrpOamSegmentBoundary  
  INTEGER as mscAtmIfVptVccNrpTxAal5PartialPacketDiscard  
  INTEGER as mscAtmIfVptVccNrpRxAal5PartialPacketDiscard  
  INTEGER as mscAtmIfVptVccNrpBandwidthElastic  
  INTEGER as mscAtmIfVptVccNrpOverrideHoldingPriority  

MscAtmIfVptVccMnrpRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfVptVccMnrpRowStatus  
  DisplayString as mscAtmIfVptVccMnrpComponentName  
  StorageType as mscAtmIfVptVccMnrpStorageType  
  NonReplicated as mscAtmIfVptVccMnrpIndex  

MscAtmIfVptVccMnrpProvEntry  
SEQUENCE    
  INTEGER as mscAtmIfVptVccMnrpOamSegmentBoundary  
  INTEGER as mscAtmIfVptVccMnrpBandwidthElastic  
  INTEGER as mscAtmIfVptVccMnrpOverrideHoldingPriority  

MscAtmIfVptVccMnrpNextHopsEntry  
SEQUENCE    
  Link as mscAtmIfVptVccMnrpNextHopsValue  
  RowStatus as mscAtmIfVptVccMnrpNextHopsRowStatus