Nortel-MsCarrier-MscPassport-AtmPnniMIB

File: Nortel-MsCarrier-MscPassport-AtmPnniMIB.mib (214419 bytes)

Imported modules

RFC-1212 Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB
Nortel-MsCarrier-MscPassport-TextualConventionsMIB Nortel-MsCarrier-MscPassport-AtmCoreMIB

Imported symbols

OBJECT-TYPE mscPassportMIBs Counter32
DisplayString StorageType RowStatus
Gauge32 Integer32 Unsigned32
Hex NonReplicated HexString
FixedPoint1 AsciiStringIndex mscAtmIf
mscAtmIfVptIndex mscAtmIfVpt mscAtmIfIndex

Defined Objects

mscAtmIfVptPnni 1.3.6.1.4.1.562.36.2.1.114.9.7
OBJECT IDENTIFIER    

mscAtmIfVptPnniRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.7.1
This entry controls the addition and deletion of mscAtmIfVptPnni components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptPnniRowStatusEntry

mscAtmIfVptPnniRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.7.1.1
A single entry in the table represents a single mscAtmIfVptPnni component.
OBJECT-TYPE    
  MscAtmIfVptPnniRowStatusEntry  

mscAtmIfVptPnniRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.7.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptPnni components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptPnniComponentName 1.3.6.1.4.1.562.36.2.1.114.9.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptPnniStorageType 1.3.6.1.4.1.562.36.2.1.114.9.7.1.1.4
This variable represents the storage type value for the mscAtmIfVptPnni tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfVptPnniIndex 1.3.6.1.4.1.562.36.2.1.114.9.7.1.1.10
This variable represents the index for the mscAtmIfVptPnni tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVptPnniSig 1.3.6.1.4.1.562.36.2.1.114.9.7.2
OBJECT IDENTIFIER    

mscAtmIfVptPnniSigRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.7.2.1
This entry controls the addition and deletion of mscAtmIfVptPnniSig components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptPnniSigRowStatusEntry

mscAtmIfVptPnniSigRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.7.2.1.1
A single entry in the table represents a single mscAtmIfVptPnniSig component.
OBJECT-TYPE    
  MscAtmIfVptPnniSigRowStatusEntry  

mscAtmIfVptPnniSigRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.7.2.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptPnniSig components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptPnniSigComponentName 1.3.6.1.4.1.562.36.2.1.114.9.7.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptPnniSigStorageType 1.3.6.1.4.1.562.36.2.1.114.9.7.2.1.1.4
This variable represents the storage type value for the mscAtmIfVptPnniSig tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfVptPnniSigIndex 1.3.6.1.4.1.562.36.2.1.114.9.7.2.1.1.10
This variable represents the index for the mscAtmIfVptPnniSig tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVptPnniSigVcd 1.3.6.1.4.1.562.36.2.1.114.9.7.2.2
OBJECT IDENTIFIER    

mscAtmIfVptPnniSigVcdRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.1
This entry controls the addition and deletion of mscAtmIfVptPnniSigVcd components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptPnniSigVcdRowStatusEntry

mscAtmIfVptPnniSigVcdRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.1.1
A single entry in the table represents a single mscAtmIfVptPnniSigVcd component.
OBJECT-TYPE    
  MscAtmIfVptPnniSigVcdRowStatusEntry  

mscAtmIfVptPnniSigVcdRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptPnniSigVcd components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptPnniSigVcdComponentName 1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptPnniSigVcdStorageType 1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.1.1.4
This variable represents the storage type value for the mscAtmIfVptPnniSigVcd tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfVptPnniSigVcdIndex 1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.1.1.10
This variable represents the index for the mscAtmIfVptPnniSigVcd tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVptPnniSigVcdProvTable 1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10
This group contains the provisionable traffic attributes for a control channel.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptPnniSigVcdProvEntry

mscAtmIfVptPnniSigVcdProvEntry 1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10.1
An entry in the mscAtmIfVptPnniSigVcdProvTable.
OBJECT-TYPE    
  MscAtmIfVptPnniSigVcdProvEntry  

mscAtmIfVptPnniSigVcdTrafficDescType 1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10.1.1
This attribute specifies the type of traffic management which is applied to both the transmit and receive direction of this connection as defined in the ATM Forum. The trafficDescType determines the number and meaning of the parameters in the trafficDescParm attribute.
OBJECT-TYPE    
  INTEGER n3(3), n6(6), n7(7), n8(8)  

mscAtmIfVptPnniSigVcdAtmServiceCategory 1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10.1.3
This attribute specifies the ATM service category for both directions of the connection. The constantBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. The consistent availability of a fixed quantity of bandwidth is considered appropriate for CBR service. Cells which are delayed beyond the value specified by CellTransfer Delay are assumed to be of significantly reduce value to the application. The rtVariableBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. Sources are expected to transmit at a rate which varies with time. Equivalently, the source can be described as 'bursty'. Cells which are delayed beyond the value specified by CTD are assumed to be of significantly reduced value to the application. Real time VBR service may support statistical multiplexing of real time sources. The nrtVariableBitRate service category is intended for non-real time applications which have bursty traffic characteristics and which can be characterized in terms of a PCR, SCR, and MBS. For those cells which are transferred within the traffic contract, the application expects a low cell loss ratio. For all connections, it expects a bound on the mean cell transfer delay. Non-real time VBR service may support statistical multiplexing of connections. The unspecifiedBitRate service is intended for non-real time applications; that is, those not requiring tightly constrained delay and delay variation. UBR sources are expected to be bursty. UBR service supports a high degree of statistical multiplexing among sources. UBR service does not specify traffic related service guarantees. No numerical commitments are made with respect to the cell loss ratio experienced by a UBR connection, or as to the cell transfer delay experienced by cells on the connection.
OBJECT-TYPE    
  INTEGER unspecifiedBitRate(0), constantBitRate(1), rtVariableBitRate(2), nrtVariableBitRate(3)  

mscAtmIfVptPnniSigVcdWeight 1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10.1.4
This attribute specifies an override for the weight of this unshaped connection. This attribute is ignored for shaped connections, for ABR connections, for connections on a CQC-based ATM FP and basic VPTs. When the value is set to sameAsCa, the weight is determined by the weight policy attribute under the CA service category component for all but standard VPT VCCs. For standard VPT VCCs, the weight is determined by the VCC's service category, when the value is set to sameAsCa. When this attribute is set to a value from 1 to 4095, that value is used for the weight policy of this connection relative to other connections. For all but standard VPT VCCs, weight policy determines the proportion of transit cell opportunities which are allocated to this connection, compared to other connections in the same service category. For standard VPT VCCs, weight policy determines the proportion of transmit cell opportunities which are allocated to this connection, compared to other connections associated with the VPT. When the value is set to upToQueueLimit, the weight policy is limited only by the txQueueLimit. VALUES ( 0 = upToQueueLimit 65535 = sameAsCa )
OBJECT-TYPE    
  Unsigned32 0 | 1..4095 | 65535  

mscAtmIfVptPnniSigVcdQosClass 1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10.1.21
This attribute specifies the quality of service for both the forward and backward direction for this connection. Class 1 supports a QOS that meets Service Class A performance requirements (Circuit emulation, constant bit rate video). Class 2 supports a QOS that meets Service Class B performance requirements (Variable bit rate audio and video). Class 3 supports a QOS that meets Service Class C performance requirements (Connection-Oriented Data Transfer). Class 4 supports a QOS that meets Service Class D performance requirements (Connectionless Data Transfer). Class 0 is the unspecified bit rate QOS class; no objective is specified for the performance parameters.
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4)  

mscAtmIfVptPnniSigVcdTrafficShaping 1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10.1.50
This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled.
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

mscAtmIfVptPnniSigVcdUnshapedTransmitQueueing 1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10.1.60
This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this connection if it is unshaped. Refer to the unshapedTransmitQueueing attribute under the AtmIf CA service category subcomponent for more details on the meaning of this attribute. When this attribute is set to sameAsCa, the transmit queueing method for the connection is based on the unshapedTransmitQueueing attribute of the connection's service category component under the ConnectionAdministrator. When this attribute is set to common, transmit traffic on this unshaped connection is destined for the common queue. The value sameAsInterface is for migration from previous software releases, but should no longer be used
OBJECT-TYPE    
  INTEGER common(1), sameAsCa(3)  

mscAtmIfVptPnniSigVcdUsageParameterControl 1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10.1.70
This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface. When sameAsCa is selected, UPC for the connection is based on the usageParameterControl attribute of the connection's service category component under the ConnectionAdministrator. If the service category has UPC enabled, then UPC is enabled for the connection. Note that enabling UPC may have no effect under certain cases. These cases are listed in the description of the usageParameterControl operational attribute, which is under the Vcc Tm or Vpc Tm component. When disabled is selected, UPC for this connection is disabled. The value sameAsInterface is for migration from previous software releases, but should no longer be used
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

mscAtmIfVptPnniSigVcdTdpTable 1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.387
This attribute is a vector of five traffic parameters whose meanings are defined by the trafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR) and requested shaping rate are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. CDVT is expressed in microseconds. The values of PCR, SCR, MBS and CDVT are used for connection admission control (CAC). The value of CDVT is only used for connections where the atmServiceCategory is constantBitRate. For all other values of atmServiceCategory, CDVT is ignored. The values of PCR, SCR and requested shaping rate are used to determine the actual shaping rate where traffic shaping is enabled. When trafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3 must be zero. When trafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. Whenever it is valid for PCR to be specified, parameter 5 may also be used to specify a requested shaping rate. A non-zero value in parameter 5 overrides the value in parameter 1 and is used as the peak cell rate in calculations of CAC and shaping rate. For trafficDescType 3 the traffic is shaped at the next rate less than the PCR. For trafficDescType 6, 7, and 8, the traffic is shaped at the highest available rate which is between PCR and SCR. However, if there is no available shaping rate between PCR and SCR, traffic is shaped at the next rate above the PCR.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptPnniSigVcdTdpEntry

mscAtmIfVptPnniSigVcdTdpEntry 1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.387.1
An entry in the mscAtmIfVptPnniSigVcdTdpTable.
OBJECT-TYPE    
  MscAtmIfVptPnniSigVcdTdpEntry  

mscAtmIfVptPnniSigVcdTdpIndex 1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.387.1.1
This variable represents the mscAtmIfVptPnniSigVcdTdpTable specific index for the mscAtmIfVptPnniSigVcdTdpTable.
OBJECT-TYPE    
  Integer32 1..5  

mscAtmIfVptPnniSigVcdTdpValue 1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.387.1.2
This variable represents an individual value for the mscAtmIfVptPnniSigVcdTdpTable.
OBJECT-TYPE    
  Unsigned32 0..2147483647  

mscAtmIfVptPnniSigProvTable 1.3.6.1.4.1.562.36.2.1.114.9.7.2.10
This attribute group contains the provisionable attributes for the Signalling component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptPnniSigProvEntry

mscAtmIfVptPnniSigProvEntry 1.3.6.1.4.1.562.36.2.1.114.9.7.2.10.1
An entry in the mscAtmIfVptPnniSigProvTable.
OBJECT-TYPE    
  MscAtmIfVptPnniSigProvEntry  

mscAtmIfVptPnniSigVci 1.3.6.1.4.1.562.36.2.1.114.9.7.2.10.1.1
This attribute specifies the signalling channel number.
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAtmIfVptPnniSigAddressConversion 1.3.6.1.4.1.562.36.2.1.114.9.7.2.10.1.2
This attribute specifies the address conversion on the outgoing signalling PDUs. The options are none, nativeE164, or nsap. The none option is the default and if this option is chosen then nothing is done to the address information element (IE) in the outgoing signalling message. If nativeE164 option is chosen, then only NSAP encapsulated E.164 addresses with zeros in the ESI are converted to native E.164 format in the outgoing signalling message. If the NSAP address is not encapsulated E.164 or the ESI field is not zeros and the nativeE164 option is chosen, then the call is cleared. If the nsap option is chosen, then native E.164 addresses are converted to NSAP E.164 with zeros in the ESI field; otherwise the address is in NSAP format and is not changed.
OBJECT-TYPE    
  INTEGER none(0), nativeE164(1), nsap(2)  

mscAtmIfVptPnniSigOperatingMode 1.3.6.1.4.1.562.36.2.1.114.9.7.2.10.1.3
This attribute specifies the operating mode of the signaling channel. provisionedOnly indicates that only SPVCs and SPVPs are supported on the interface and SVCs are not supported. This value is permitted only on UNI interfaces. normal indicates that SVCs, SPVCs, and SPVPs are supported on the interface.
OBJECT-TYPE    
  INTEGER normal(0), provisionedOnly(1)  

mscAtmIfVptPnniSigStateTable 1.3.6.1.4.1.562.36.2.1.114.9.7.2.11
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptPnniSigStateEntry

mscAtmIfVptPnniSigStateEntry 1.3.6.1.4.1.562.36.2.1.114.9.7.2.11.1
An entry in the mscAtmIfVptPnniSigStateTable.
OBJECT-TYPE    
  MscAtmIfVptPnniSigStateEntry  

mscAtmIfVptPnniSigAdminState 1.3.6.1.4.1.562.36.2.1.114.9.7.2.11.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscAtmIfVptPnniSigOperationalState 1.3.6.1.4.1.562.36.2.1.114.9.7.2.11.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscAtmIfVptPnniSigUsageState 1.3.6.1.4.1.562.36.2.1.114.9.7.2.11.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscAtmIfVptPnniSigOperTable 1.3.6.1.4.1.562.36.2.1.114.9.7.2.12
This attribute contains the operational attributes for the AtmSignalling component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptPnniSigOperEntry

mscAtmIfVptPnniSigOperEntry 1.3.6.1.4.1.562.36.2.1.114.9.7.2.12.1
An entry in the mscAtmIfVptPnniSigOperTable.
OBJECT-TYPE    
  MscAtmIfVptPnniSigOperEntry  

mscAtmIfVptPnniSigLastTxCauseCode 1.3.6.1.4.1.562.36.2.1.114.9.7.2.12.1.1
This attribute indicates the cause code in the last transmitted signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages.
OBJECT-TYPE    
  Unsigned32 0..255  

mscAtmIfVptPnniSigLastTxDiagCode 1.3.6.1.4.1.562.36.2.1.114.9.7.2.12.1.2
This attribute contains the diagnostic code in the last transmitted signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0.
OBJECT-TYPE    
  Hex 0..255  

mscAtmIfVptPnniSigLastRxCauseCode 1.3.6.1.4.1.562.36.2.1.114.9.7.2.12.1.3
This attribute contains the cause code in the last received signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages.
OBJECT-TYPE    
  Unsigned32 0..255  

mscAtmIfVptPnniSigLastRxDiagCode 1.3.6.1.4.1.562.36.2.1.114.9.7.2.12.1.4
This attribute contains the diagnostic code in the last received signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0.
OBJECT-TYPE    
  Hex 0..255  

mscAtmIfVptPnniSigStatsTable 1.3.6.1.4.1.562.36.2.1.114.9.7.2.13
This attribute group contains the statistics associated with the AtmSignalling component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptPnniSigStatsEntry

mscAtmIfVptPnniSigStatsEntry 1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1
An entry in the mscAtmIfVptPnniSigStatsTable.
OBJECT-TYPE    
  MscAtmIfVptPnniSigStatsEntry  

mscAtmIfVptPnniSigCurrentConnections 1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1.1
This attribute indicates the total number of currently active connections.
OBJECT-TYPE    
  Counter32  

mscAtmIfVptPnniSigPeakConnections 1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1.2
This attribute indicates the high water mark of active point-to- point and point-to-multipoint connections.
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAtmIfVptPnniSigSuccessfulConnections 1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1.3
This attribute counts the total number of switched point-to- point and point-to-multipoint connections that were successfully established. The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

mscAtmIfVptPnniSigFailedConnections 1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1.4
This attribute counts the total number of switched connections that were not successfully established.The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

mscAtmIfVptPnniSigTxPdus 1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1.5
This attribute counts the number of transmitted signalling PDUs.The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

mscAtmIfVptPnniSigRxPdus 1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1.6
This attribute counts the number of received signalling PDUs.The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

mscAtmIfVptPnniSigCurrentPmpConnections 1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1.7
This attribute indicates the number of currently active point-to- multipoint connections.
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAtmIfVptPnniSigPeakPmpConnections 1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1.8
This attribute indicates the high water mark of active point-to- multipoint connections.
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAtmIfVptPnniSigSuccessfulPmpConnections 1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1.9
This attribute counts the total number of switched point-to- multipoint connections that were successfully established. The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

mscAtmIfVptPnniSigFailedPmpConnections 1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1.10
This attribute counts the number of switched point-to- multipoint connections that were not successfully established.The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

mscAtmIfVptPnniSigNewCurrentConnections 1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1.11
This attribute indicates the total number of currently active point-to- point and point-to-multipoint connections.
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAtmIfVptPnniRcc 1.3.6.1.4.1.562.36.2.1.114.9.7.3
OBJECT IDENTIFIER    

mscAtmIfVptPnniRccRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.7.3.1
This entry controls the addition and deletion of mscAtmIfVptPnniRcc components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptPnniRccRowStatusEntry

mscAtmIfVptPnniRccRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.7.3.1.1
A single entry in the table represents a single mscAtmIfVptPnniRcc component.
OBJECT-TYPE    
  MscAtmIfVptPnniRccRowStatusEntry  

mscAtmIfVptPnniRccRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.7.3.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptPnniRcc components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptPnniRccComponentName 1.3.6.1.4.1.562.36.2.1.114.9.7.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptPnniRccStorageType 1.3.6.1.4.1.562.36.2.1.114.9.7.3.1.1.4
This variable represents the storage type value for the mscAtmIfVptPnniRcc tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfVptPnniRccIndex 1.3.6.1.4.1.562.36.2.1.114.9.7.3.1.1.10
This variable represents the index for the mscAtmIfVptPnniRcc tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVptPnniRccVcd 1.3.6.1.4.1.562.36.2.1.114.9.7.3.2
OBJECT IDENTIFIER    

mscAtmIfVptPnniRccVcdRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.1
This entry controls the addition and deletion of mscAtmIfVptPnniRccVcd components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptPnniRccVcdRowStatusEntry

mscAtmIfVptPnniRccVcdRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.1.1
A single entry in the table represents a single mscAtmIfVptPnniRccVcd component.
OBJECT-TYPE    
  MscAtmIfVptPnniRccVcdRowStatusEntry  

mscAtmIfVptPnniRccVcdRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptPnniRccVcd components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptPnniRccVcdComponentName 1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptPnniRccVcdStorageType 1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.1.1.4
This variable represents the storage type value for the mscAtmIfVptPnniRccVcd tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfVptPnniRccVcdIndex 1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.1.1.10
This variable represents the index for the mscAtmIfVptPnniRccVcd tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVptPnniRccVcdProvTable 1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.10
This group contains the provisionable traffic attributes for a control channel.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptPnniRccVcdProvEntry

mscAtmIfVptPnniRccVcdProvEntry 1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.10.1
An entry in the mscAtmIfVptPnniRccVcdProvTable.
OBJECT-TYPE    
  MscAtmIfVptPnniRccVcdProvEntry  

mscAtmIfVptPnniRccVcdTrafficDescType 1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.10.1.1
This attribute specifies the type of traffic management which is applied to both the transmit and receive direction of this connection as defined in the ATM Forum. The trafficDescType determines the number and meaning of the parameters in the trafficDescParm attribute.
OBJECT-TYPE    
  INTEGER n3(3), n6(6), n7(7), n8(8)  

mscAtmIfVptPnniRccVcdAtmServiceCategory 1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.10.1.3
This attribute specifies the ATM service category for both directions of the connection. The constantBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. The consistent availability of a fixed quantity of bandwidth is considered appropriate for CBR service. Cells which are delayed beyond the value specified by CellTransfer Delay are assumed to be of significantly reduce value to the application. The rtVariableBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. Sources are expected to transmit at a rate which varies with time. Equivalently, the source can be described as 'bursty'. Cells which are delayed beyond the value specified by CTD are assumed to be of significantly reduced value to the application. Real time VBR service may support statistical multiplexing of real time sources. The nrtVariableBitRate service category is intended for non-real time applications which have bursty traffic characteristics and which can be characterized in terms of a PCR, SCR, and MBS. For those cells which are transferred within the traffic contract, the application expects a low cell loss ratio. For all connections, it expects a bound on the mean cell transfer delay. Non-real time VBR service may support statistical multiplexing of connections. The unspecifiedBitRate service is intended for non-real time applications; that is, those not requiring tightly constrained delay and delay variation. UBR sources are expected to be bursty. UBR service supports a high degree of statistical multiplexing among sources. UBR service does not specify traffic related service guarantees. No numerical commitments are made with respect to the cell loss ratio experienced by a UBR connection, or as to the cell transfer delay experienced by cells on the connection.
OBJECT-TYPE    
  INTEGER unspecifiedBitRate(0), constantBitRate(1), rtVariableBitRate(2), nrtVariableBitRate(3)  

mscAtmIfVptPnniRccVcdWeight 1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.10.1.4
This attribute specifies an override for the weight of this unshaped connection. This attribute is ignored for shaped connections, for ABR connections, for connections on a CQC-based ATM FP and basic VPTs. When the value is set to sameAsCa, the weight is determined by the weight policy attribute under the CA service category component for all but standard VPT VCCs. For standard VPT VCCs, the weight is determined by the VCC's service category, when the value is set to sameAsCa. When this attribute is set to a value from 1 to 4095, that value is used for the weight policy of this connection relative to other connections. For all but standard VPT VCCs, weight policy determines the proportion of transit cell opportunities which are allocated to this connection, compared to other connections in the same service category. For standard VPT VCCs, weight policy determines the proportion of transmit cell opportunities which are allocated to this connection, compared to other connections associated with the VPT. When the value is set to upToQueueLimit, the weight policy is limited only by the txQueueLimit. VALUES ( 0 = upToQueueLimit 65535 = sameAsCa )
OBJECT-TYPE    
  Unsigned32 0 | 1..4095 | 65535  

mscAtmIfVptPnniRccVcdQosClass 1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.10.1.21
This attribute specifies the quality of service for both the forward and backward direction for this connection. Class 1 supports a QOS that meets Service Class A performance requirements (Circuit emulation, constant bit rate video). Class 2 supports a QOS that meets Service Class B performance requirements (Variable bit rate audio and video). Class 3 supports a QOS that meets Service Class C performance requirements (Connection-Oriented Data Transfer). Class 4 supports a QOS that meets Service Class D performance requirements (Connectionless Data Transfer). Class 0 is the unspecified bit rate QOS class; no objective is specified for the performance parameters.
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4)  

mscAtmIfVptPnniRccVcdTrafficShaping 1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.10.1.50
This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled.
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

mscAtmIfVptPnniRccVcdUnshapedTransmitQueueing 1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.10.1.60
This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this connection if it is unshaped. Refer to the unshapedTransmitQueueing attribute under the AtmIf CA service category subcomponent for more details on the meaning of this attribute. When this attribute is set to sameAsCa, the transmit queueing method for the connection is based on the unshapedTransmitQueueing attribute of the connection's service category component under the ConnectionAdministrator. When this attribute is set to common, transmit traffic on this unshaped connection is destined for the common queue. The value sameAsInterface is for migration from previous software releases, but should no longer be used
OBJECT-TYPE    
  INTEGER common(1), sameAsCa(3)  

mscAtmIfVptPnniRccVcdUsageParameterControl 1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.10.1.70
This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface. When sameAsCa is selected, UPC for the connection is based on the usageParameterControl attribute of the connection's service category component under the ConnectionAdministrator. If the service category has UPC enabled, then UPC is enabled for the connection. Note that enabling UPC may have no effect under certain cases. These cases are listed in the description of the usageParameterControl operational attribute, which is under the Vcc Tm or Vpc Tm component. When disabled is selected, UPC for this connection is disabled. The value sameAsInterface is for migration from previous software releases, but should no longer be used
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

mscAtmIfVptPnniRccVcdTdpTable 1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.387
This attribute is a vector of five traffic parameters whose meanings are defined by the trafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR) and requested shaping rate are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. CDVT is expressed in microseconds. The values of PCR, SCR, MBS and CDVT are used for connection admission control (CAC). The value of CDVT is only used for connections where the atmServiceCategory is constantBitRate. For all other values of atmServiceCategory, CDVT is ignored. The values of PCR, SCR and requested shaping rate are used to determine the actual shaping rate where traffic shaping is enabled. When trafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3 must be zero. When trafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. Whenever it is valid for PCR to be specified, parameter 5 may also be used to specify a requested shaping rate. A non-zero value in parameter 5 overrides the value in parameter 1 and is used as the peak cell rate in calculations of CAC and shaping rate. For trafficDescType 3 the traffic is shaped at the next rate less than the PCR. For trafficDescType 6, 7, and 8, the traffic is shaped at the highest available rate which is between PCR and SCR. However, if there is no available shaping rate between PCR and SCR, traffic is shaped at the next rate above the PCR.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptPnniRccVcdTdpEntry

mscAtmIfVptPnniRccVcdTdpEntry 1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.387.1
An entry in the mscAtmIfVptPnniRccVcdTdpTable.
OBJECT-TYPE    
  MscAtmIfVptPnniRccVcdTdpEntry  

mscAtmIfVptPnniRccVcdTdpIndex 1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.387.1.1
This variable represents the mscAtmIfVptPnniRccVcdTdpTable specific index for the mscAtmIfVptPnniRccVcdTdpTable.
OBJECT-TYPE    
  Integer32 1..5  

mscAtmIfVptPnniRccVcdTdpValue 1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.387.1.2
This variable represents an individual value for the mscAtmIfVptPnniRccVcdTdpTable.
OBJECT-TYPE    
  Unsigned32 0..2147483647  

mscAtmIfVptPnniRccProvTable 1.3.6.1.4.1.562.36.2.1.114.9.7.3.10
This group contains the generic provisionable attributes of an Rcc component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptPnniRccProvEntry

mscAtmIfVptPnniRccProvEntry 1.3.6.1.4.1.562.36.2.1.114.9.7.3.10.1
An entry in the mscAtmIfVptPnniRccProvTable.
OBJECT-TYPE    
  MscAtmIfVptPnniRccProvEntry  

mscAtmIfVptPnniRccVci 1.3.6.1.4.1.562.36.2.1.114.9.7.3.10.1.1
This attribute specifies the VCI for the Routing Control Channel (RCC). It is not recommended that the value be changed from the default of 18 unless absolutely necessary. If a different VCI is specified, ensure that the RCC at the far end is provisioned to use the same VCI, otherwise the RCC will not come up.
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAtmIfVptPnniRccHlParmsTable 1.3.6.1.4.1.562.36.2.1.114.9.7.3.11
This group contains the provisionable Hello protocol parameters for an Rcc component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptPnniRccHlParmsEntry

mscAtmIfVptPnniRccHlParmsEntry 1.3.6.1.4.1.562.36.2.1.114.9.7.3.11.1
An entry in the mscAtmIfVptPnniRccHlParmsTable.
OBJECT-TYPE    
  MscAtmIfVptPnniRccHlParmsEntry  

mscAtmIfVptPnniRccHelloHoldDown 1.3.6.1.4.1.562.36.2.1.114.9.7.3.11.1.1
This attribute is used to limit the rate at which this node sends out Hello packets. Specifically, it specifies the minimum time between successive Hellos. A value of 0 specifies that the value provisioned for the helloHoldDown attribute of the ARtg Pnni component should be used.
OBJECT-TYPE    
  FixedPoint1 0..655350  

mscAtmIfVptPnniRccHelloInterval 1.3.6.1.4.1.562.36.2.1.114.9.7.3.11.1.2
This attribute specifies the duration of the Hello Timer. Every helloInterval seconds, this node will send out a Hello packet to the neighbor node, subject to the helloHoldDown timer having expired at least once since the last Hello packet was sent. A value of 0 specifies that the value provisioned for the helloInterval attribute of the ARtg Pnni component should be used.
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAtmIfVptPnniRccHelloInactivityFactor 1.3.6.1.4.1.562.36.2.1.114.9.7.3.11.1.3
This attribute specifies the number of Hello intervals allowed to pass without receiving a Hello from the neighbor node, before an attempt is made to re-stage. The hello inactivity timer is enabled in the oneWayInside, twoWayInside, oneWayOutside, twoWayOutside and commonOutside hello states (see the helloState attribute on the Rcc component for a description of these states). Note that the value for the Hello interval used in the calculation is the one specified in the Hello packet from the neighbor node. A value of 0 specifies that the value provisioned for the helloInactivityFactor attribute of the ARtg Pnni component should be used. DESCRIPTION
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAtmIfVptPnniRccStateTable 1.3.6.1.4.1.562.36.2.1.114.9.7.3.12
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptPnniRccStateEntry

mscAtmIfVptPnniRccStateEntry 1.3.6.1.4.1.562.36.2.1.114.9.7.3.12.1
An entry in the mscAtmIfVptPnniRccStateTable.
OBJECT-TYPE    
  MscAtmIfVptPnniRccStateEntry  

mscAtmIfVptPnniRccAdminState 1.3.6.1.4.1.562.36.2.1.114.9.7.3.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscAtmIfVptPnniRccOperationalState 1.3.6.1.4.1.562.36.2.1.114.9.7.3.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscAtmIfVptPnniRccUsageState 1.3.6.1.4.1.562.36.2.1.114.9.7.3.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscAtmIfVptPnniRccOperTable 1.3.6.1.4.1.562.36.2.1.114.9.7.3.13
This group contains the operational attributes for an Rcc component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptPnniRccOperEntry

mscAtmIfVptPnniRccOperEntry 1.3.6.1.4.1.562.36.2.1.114.9.7.3.13.1
An entry in the mscAtmIfVptPnniRccOperTable.
OBJECT-TYPE    
  MscAtmIfVptPnniRccOperEntry  

mscAtmIfVptPnniRccType 1.3.6.1.4.1.562.36.2.1.114.9.7.3.13.1.1
This attribute indicates the role of this link in the PNNI hierarchy. The following values are possible: unknown: the Hello protocol has not yet determined the role of the link. lowestLevelHorizLink: the link is a horizontal link between two lowest level nodes. lowestLevelOutsideLink: the link is an outside link between two border nodes. horizontalLinkToLgn: the link is a horizontal link to a Logical Group Node (LGN). uplink: the link is a uplink to a higher level LGN.
OBJECT-TYPE    
  INTEGER unknown(0), lowestLevelHorizLink(1), lowestLevelOutsideLink(2), horizontalLinkToLGN(3), uplink(4)  

mscAtmIfVptPnniRccNegotiatedVersion 1.3.6.1.4.1.562.36.2.1.114.9.7.3.13.1.2
This attribute indicates the PNNI version negotiated with the neighbor node.
OBJECT-TYPE    
  INTEGER unsupported(0), version1point0(1)  

mscAtmIfVptPnniRccHelloState 1.3.6.1.4.1.562.36.2.1.114.9.7.3.13.1.3
This attribute indicates the state of the Hello protocol exchange over this link. The following are the possible values for this attribute: down: the link is down; no PNNI routing packets will be sent over or received over such a link. This is the initial state of the Hello Finite State Machine, and can also be reached when lower-level protocols have indicated that the link is not usable. attempt: no Hello packets or Hello packets, with mismatch information, have been received recently from the neighbor. Attempts are made to contact the neighbor node by sending out Hello packets every helloInterval seconds. oneWayInside: Hello packets have been recently received from the neighbor and it has been established that both nodes are members of the same peer group, but the remote node ID and remote port ID in the neighbor's Hello packets were set to zero. A Hello packet is sent to the neighbor and the Hello timer is restarted. twoWayInside: Bidirectional communication over this link between this node and the neighbor node has been achieved. oneWayOutside: Hello packets have been recently received from the neighbor and it has been established that both nodes are members of a different peer group, but the remote node ID and remote port ID in the neighbor's Hello packets were set to zero. twoWayOutside: Hellos have recently been received from the neighbor indicating that the neighbor node belongs to a different peer group. The correct remote node ID and remote port ID fields were included in the Hello packet, but the nodal hierarchy list did not include any common peer group. This state can also be reached if a hierarchy mismatch occurs while in the commonOutside state. commonOutside: A common level of the routing hierarchy has been found, in addition to achieving full bi-directional communication between the two nodes.
OBJECT-TYPE    
  INTEGER notApplicable(0), down(1), attempt(2), oneWayInside(3), twoWayInside(4), oneWayOutside(5), twoWayOutside(6), commonOutside(7)  

mscAtmIfVptPnniRccRemoteNodeId 1.3.6.1.4.1.562.36.2.1.114.9.7.3.13.1.4
This attribute indicates the neighbor node's node id.
OBJECT-TYPE    
  HexString SIZE(22)  

mscAtmIfVptPnniRccRemotePortId 1.3.6.1.4.1.562.36.2.1.114.9.7.3.13.1.5
This attribute indicates the neighbor node's port id.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscAtmIfVptPnniRccStatsTable 1.3.6.1.4.1.562.36.2.1.114.9.7.3.14
This group contains the statistical attributes for an Rcc component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptPnniRccStatsEntry

mscAtmIfVptPnniRccStatsEntry 1.3.6.1.4.1.562.36.2.1.114.9.7.3.14.1
An entry in the mscAtmIfVptPnniRccStatsTable.
OBJECT-TYPE    
  MscAtmIfVptPnniRccStatsEntry  

mscAtmIfVptPnniRccHelloPacketsRx 1.3.6.1.4.1.562.36.2.1.114.9.7.3.14.1.1
This attribute counts the total number of Hello packets received across this RCC, including bad and mismatched Hello packets. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscAtmIfVptPnniRccHelloPacketsTx 1.3.6.1.4.1.562.36.2.1.114.9.7.3.14.1.2
This attribute counts the total number of Hello packets transmitted across this RCC. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscAtmIfVptPnniRccMismatchedHelloPacketsRx 1.3.6.1.4.1.562.36.2.1.114.9.7.3.14.1.3
This attribute counts the total number of mismatched Hello packets received over this RCC. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscAtmIfVptPnniRccBadHelloPacketsRx 1.3.6.1.4.1.562.36.2.1.114.9.7.3.14.1.4
This attribute counts the total number of bad Hello packets received over this RCC. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscAtmIfVptPnniAddr 1.3.6.1.4.1.562.36.2.1.114.9.7.4
OBJECT IDENTIFIER    

mscAtmIfVptPnniAddrRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.7.4.1
This entry controls the addition and deletion of mscAtmIfVptPnniAddr components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptPnniAddrRowStatusEntry

mscAtmIfVptPnniAddrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.7.4.1.1
A single entry in the table represents a single mscAtmIfVptPnniAddr component.
OBJECT-TYPE    
  MscAtmIfVptPnniAddrRowStatusEntry  

mscAtmIfVptPnniAddrRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.7.4.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptPnniAddr components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptPnniAddrComponentName 1.3.6.1.4.1.562.36.2.1.114.9.7.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptPnniAddrStorageType 1.3.6.1.4.1.562.36.2.1.114.9.7.4.1.1.4
This variable represents the storage type value for the mscAtmIfVptPnniAddr tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfVptPnniAddrAddressIndex 1.3.6.1.4.1.562.36.2.1.114.9.7.4.1.1.10
This variable represents an index for the mscAtmIfVptPnniAddr tables.
OBJECT-TYPE    
  AsciiStringIndex SIZE(1..40)  

mscAtmIfVptPnniAddrAddressTypeIndex 1.3.6.1.4.1.562.36.2.1.114.9.7.4.1.1.11
This variable represents an index for the mscAtmIfVptPnniAddr tables.
OBJECT-TYPE    
  INTEGER primary(0), alternate(1), registered(2), default(3)  

mscAtmIfVptPnniAddrTermSP 1.3.6.1.4.1.562.36.2.1.114.9.7.4.2
OBJECT IDENTIFIER    

mscAtmIfVptPnniAddrTermSPRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.7.4.2.1
This entry controls the addition and deletion of mscAtmIfVptPnniAddrTermSP components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptPnniAddrTermSPRowStatusEntry

mscAtmIfVptPnniAddrTermSPRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.7.4.2.1.1
A single entry in the table represents a single mscAtmIfVptPnniAddrTermSP component.
OBJECT-TYPE    
  MscAtmIfVptPnniAddrTermSPRowStatusEntry  

mscAtmIfVptPnniAddrTermSPRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.7.4.2.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptPnniAddrTermSP components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptPnniAddrTermSPComponentName 1.3.6.1.4.1.562.36.2.1.114.9.7.4.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptPnniAddrTermSPStorageType 1.3.6.1.4.1.562.36.2.1.114.9.7.4.2.1.1.4
This variable represents the storage type value for the mscAtmIfVptPnniAddrTermSP tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfVptPnniAddrTermSPIndex 1.3.6.1.4.1.562.36.2.1.114.9.7.4.2.1.1.10
This variable represents the index for the mscAtmIfVptPnniAddrTermSP tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVptPnniAddrPnniInfo 1.3.6.1.4.1.562.36.2.1.114.9.7.4.3
OBJECT IDENTIFIER    

mscAtmIfVptPnniAddrPnniInfoRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.7.4.3.1
This entry controls the addition and deletion of mscAtmIfVptPnniAddrPnniInfo components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptPnniAddrPnniInfoRowStatusEntry

mscAtmIfVptPnniAddrPnniInfoRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.7.4.3.1.1
A single entry in the table represents a single mscAtmIfVptPnniAddrPnniInfo component.
OBJECT-TYPE    
  MscAtmIfVptPnniAddrPnniInfoRowStatusEntry  

mscAtmIfVptPnniAddrPnniInfoRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.7.4.3.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptPnniAddrPnniInfo components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptPnniAddrPnniInfoComponentName 1.3.6.1.4.1.562.36.2.1.114.9.7.4.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptPnniAddrPnniInfoStorageType 1.3.6.1.4.1.562.36.2.1.114.9.7.4.3.1.1.4
This variable represents the storage type value for the mscAtmIfVptPnniAddrPnniInfo tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfVptPnniAddrPnniInfoIndex 1.3.6.1.4.1.562.36.2.1.114.9.7.4.3.1.1.10
This variable represents the index for the mscAtmIfVptPnniAddrPnniInfo tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVptPnniAddrPnniInfoProvTable 1.3.6.1.4.1.562.36.2.1.114.9.7.4.3.10
This attribute group contains the provisioned attributes relating to PNNI for a PnniInfo component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptPnniAddrPnniInfoProvEntry

mscAtmIfVptPnniAddrPnniInfoProvEntry 1.3.6.1.4.1.562.36.2.1.114.9.7.4.3.10.1
An entry in the mscAtmIfVptPnniAddrPnniInfoProvTable.
OBJECT-TYPE    
  MscAtmIfVptPnniAddrPnniInfoProvEntry  

mscAtmIfVptPnniAddrPnniInfoScope 1.3.6.1.4.1.562.36.2.1.114.9.7.4.3.10.1.1
This attribute specifies the scope of the ATM address, which is the highest level up to which this address will be advertised in the PNNI hierarchy. The scope must be set to a value numerically less than or equal to the level of the lowest level peer group containing this node. Setting the scope to 0 will cause the address to be advertised globally within this PNNI routing domain.
OBJECT-TYPE    
  INTEGER -1..104  

mscAtmIfVptPnniAddrPnniInfoReachability 1.3.6.1.4.1.562.36.2.1.114.9.7.4.3.10.1.2
This attribute indicates whether the address is internal or exterior. An internal reachable address is an address of a destination that is directly attached to the logical node advertising the address. An exterior reachable address is an address that can be reached through a PNNI routing domain, but which is not located in that PNNI routing domain.
OBJECT-TYPE    
  INTEGER internal(0), exterior(1)  

mscAtmIfVptPnniAddrOperTable 1.3.6.1.4.1.562.36.2.1.114.9.7.4.10
This attribute group contains the operational attributes for the Address component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptPnniAddrOperEntry

mscAtmIfVptPnniAddrOperEntry 1.3.6.1.4.1.562.36.2.1.114.9.7.4.10.1
An entry in the mscAtmIfVptPnniAddrOperTable.
OBJECT-TYPE    
  MscAtmIfVptPnniAddrOperEntry  

mscAtmIfVptPnniAddrScope 1.3.6.1.4.1.562.36.2.1.114.9.7.4.10.1.1
This attribute indicates the scope of the ATM address, which is the highest level to which this address will be advertised in the PNNI hierarchy. If no PnniInfo subcomponent has been provisioned, then the scope will default to the level of this node in the PNNI hierarchy. If this node does not participate in a PNNI hierarchy, then this attribute will have the value of -1.
OBJECT-TYPE    
  INTEGER -1..104  

mscAtmIfVptPnniAddrReachability 1.3.6.1.4.1.562.36.2.1.114.9.7.4.10.1.2
This attribute indicates whether the address is internal or exterior. An internal reachable address is an address of a destination that is directly attached to the logical node advertising the address. An exterior reachable address is an address that can be reached through a PNNI routing domain, but which is not located in that PNNI routing domain.
OBJECT-TYPE    
  INTEGER internal(0), exterior(1)  

mscAtmIfVptPnniProvTable 1.3.6.1.4.1.562.36.2.1.114.9.7.10
This group contains the provisionable attributes for the Pnni component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptPnniProvEntry

mscAtmIfVptPnniProvEntry 1.3.6.1.4.1.562.36.2.1.114.9.7.10.1
An entry in the mscAtmIfVptPnniProvTable.
OBJECT-TYPE    
  MscAtmIfVptPnniProvEntry  

mscAtmIfVptPnniSoftPvcRetryPeriod 1.3.6.1.4.1.562.36.2.1.114.9.7.10.1.1
This attribute represents the time in seconds to wait between call setup retries. The resolution is to the nearest 10 seconds. This attribute has been obsoleted and is replaced by the softPvpAndPvcRetryPeriod attribute.
OBJECT-TYPE    
  Unsigned32 20..999999  

mscAtmIfVptPnniSoftPvpAndPvcRetryPeriod 1.3.6.1.4.1.562.36.2.1.114.9.7.10.1.2
This attribute represents the time in seconds to wait between soft PVP or soft PVC call setup retries. The resolution is to the nearest 10 seconds.
OBJECT-TYPE    
  Unsigned32 20..999999  

mscAtmIfVptPnniSoftPvpAndPvcHoldOffTime 1.3.6.1.4.1.562.36.2.1.114.9.7.10.1.5
This attribute specifies how long to hold off retries following a release or the connection. The resolution is to the nearest 50 ms.
OBJECT-TYPE    
  Unsigned32 0 | 50..20000  

mscAtmIfVptPnniAdminWeightsTable 1.3.6.1.4.1.562.36.2.1.114.9.7.11
This group contains the provisionable administrative weights for the Pnni component. These weights will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptPnniAdminWeightsEntry

mscAtmIfVptPnniAdminWeightsEntry 1.3.6.1.4.1.562.36.2.1.114.9.7.11.1
An entry in the mscAtmIfVptPnniAdminWeightsTable.
OBJECT-TYPE    
  MscAtmIfVptPnniAdminWeightsEntry  

mscAtmIfVptPnniCbrWeight 1.3.6.1.4.1.562.36.2.1.114.9.7.11.1.1
This attribute specifies the administrative weight assigned for setting up switched calls with a service category of Constant Bit Rate (CBR) for this PNNI interface. The value specified will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion; the higher the value, the less desirable the link will be in path selection.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscAtmIfVptPnniRtVbrWeight 1.3.6.1.4.1.562.36.2.1.114.9.7.11.1.2
This attribute specifies the administrative weight assigned for setting up switched calls with a service category of Real-Time Variable Bit Rate (RT-VBR) for this PNNI interface. The value specified will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion; the higher the value, the less desirable the link will be in path selection.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscAtmIfVptPnniNrtVbrWeight 1.3.6.1.4.1.562.36.2.1.114.9.7.11.1.3
This attribute specifies the administrative weight assigned for setting up switched calls with a service category of Non Real-Time Variable Bit Rate (NRT-VBR) for this PNNI interface. The value specified will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion; the higher the value, the less desirable the link will be in path selection.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscAtmIfVptPnniUbrWeight 1.3.6.1.4.1.562.36.2.1.114.9.7.11.1.4
This attribute specifies the administrative weight assigned for setting up switched calls with a service category of Unspecified Bit Rate (UBR) for this PNNI interface. The value specified will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion; the higher the value, the less desirable the link will be in path selection.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscAtmIfVptPnniAcctOptTable 1.3.6.1.4.1.562.36.2.1.114.9.7.12
This group contains the provisionable attributes for accounting.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptPnniAcctOptEntry

mscAtmIfVptPnniAcctOptEntry 1.3.6.1.4.1.562.36.2.1.114.9.7.12.1
An entry in the mscAtmIfVptPnniAcctOptTable.
OBJECT-TYPE    
  MscAtmIfVptPnniAcctOptEntry  

mscAtmIfVptPnniAccountCollection 1.3.6.1.4.1.562.36.2.1.114.9.7.12.1.1
This attribute is used to turn accounting on or off for SVC and SPVC connections. It also specifies the reason(s) for which accounting data is collected: billing, test, study, audit, or force. If the set of reasons is not empty then accounting records will be generated by this interface in the following situations: - on a TODA changeover if TODA is enabled; - every 12 hours (per connection) if TODA is disabled; - on every call clear (a call record with final cell counts). If none of the reasons is present, then accounting will be suppressed. The reason for collection is recorded in the accounting record, in the attribute callingCollectReason or calledCollectReason as appropriate. Description of bits: bill(0) test(1) study(2) audit(3) force(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscAtmIfVptPnniAccountConnectionType 1.3.6.1.4.1.562.36.2.1.114.9.7.12.1.2
This attribute specifies whether accounting records generated by this interface should be marked as originating, terminating or intermediate. This attribute, in combination with the direction of the call, determines the value of attribute connPointType of the accounting record and may be used by downstream accounting processes to correlate the records. If the value is origTerm then records generated for incoming calls will be marked as originating and records generated for outgoing calls will be marked as terminating. If the value is intermediate then records generated for all calls will be marked as intermediate.
OBJECT-TYPE    
  INTEGER origTerm(0), intermediate(1)  

mscAtmIfVptPnniAccountClass 1.3.6.1.4.1.562.36.2.1.114.9.7.12.1.3
This attribute specifies the accounting class associated with the interface. Its meaning is determined by the network operator. Its value is simply recorded in the accounting records generated by this interface, in the attribute callingServiceType or calledServiceType as appropriate.
OBJECT-TYPE    
  Unsigned32 0..255  

mscAtmIfVptPnniServiceExchange 1.3.6.1.4.1.562.36.2.1.114.9.7.12.1.4
This attribute specifies the data service exchange associated with this interface. Its meaning is determined by the network operator. Its value is simply recorded in the accounting records generated by this interface, in the attribute callingDse or calledDse as appropriate.
OBJECT-TYPE    
  Unsigned32 0..255  

mscAtmIfVptPnniOperationalTable 1.3.6.1.4.1.562.36.2.1.114.9.7.13
This group contains the operational attributes for a Pnni component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptPnniOperationalEntry

mscAtmIfVptPnniOperationalEntry 1.3.6.1.4.1.562.36.2.1.114.9.7.13.1
An entry in the mscAtmIfVptPnniOperationalTable.
OBJECT-TYPE    
  MscAtmIfVptPnniOperationalEntry  

mscAtmIfVptPnniPortId 1.3.6.1.4.1.562.36.2.1.114.9.7.13.1.1
This attribute indicates the port id of the PNNI interface, which is the parent AtmIf's instance number.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscAtmIfVptPnniVProvTable 1.3.6.1.4.1.562.36.2.1.114.9.7.14
This group contains the provisionable attributes for the Pnni component which are specific to virtual PNNI interfaces.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptPnniVProvEntry

mscAtmIfVptPnniVProvEntry 1.3.6.1.4.1.562.36.2.1.114.9.7.14.1
An entry in the mscAtmIfVptPnniVProvTable.
OBJECT-TYPE    
  MscAtmIfVptPnniVProvEntry  

mscAtmIfVptPnniVpci 1.3.6.1.4.1.562.36.2.1.114.9.7.14.1.1
This attribute specifies the Virtual Path Connection Identifier (VPCI) to be used between this signalling entity and its peer. The VPCI of the peer virtual PNNI must have the same value for switched connections to be set up across the interface.
OBJECT-TYPE    
  Unsigned32 0..255  

mscAtmIfPnni 1.3.6.1.4.1.562.36.2.1.114.96
OBJECT IDENTIFIER    

mscAtmIfPnniRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.96.1
This entry controls the addition and deletion of mscAtmIfPnni components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfPnniRowStatusEntry

mscAtmIfPnniRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.96.1.1
A single entry in the table represents a single mscAtmIfPnni component.
OBJECT-TYPE    
  MscAtmIfPnniRowStatusEntry  

mscAtmIfPnniRowStatus 1.3.6.1.4.1.562.36.2.1.114.96.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfPnni components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfPnniComponentName 1.3.6.1.4.1.562.36.2.1.114.96.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfPnniStorageType 1.3.6.1.4.1.562.36.2.1.114.96.1.1.4
This variable represents the storage type value for the mscAtmIfPnni tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfPnniIndex 1.3.6.1.4.1.562.36.2.1.114.96.1.1.10
This variable represents the index for the mscAtmIfPnni tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfPnniSig 1.3.6.1.4.1.562.36.2.1.114.96.2
OBJECT IDENTIFIER    

mscAtmIfPnniSigRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.96.2.1
This entry controls the addition and deletion of mscAtmIfPnniSig components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfPnniSigRowStatusEntry

mscAtmIfPnniSigRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.96.2.1.1
A single entry in the table represents a single mscAtmIfPnniSig component.
OBJECT-TYPE    
  MscAtmIfPnniSigRowStatusEntry  

mscAtmIfPnniSigRowStatus 1.3.6.1.4.1.562.36.2.1.114.96.2.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfPnniSig components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfPnniSigComponentName 1.3.6.1.4.1.562.36.2.1.114.96.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfPnniSigStorageType 1.3.6.1.4.1.562.36.2.1.114.96.2.1.1.4
This variable represents the storage type value for the mscAtmIfPnniSig tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfPnniSigIndex 1.3.6.1.4.1.562.36.2.1.114.96.2.1.1.10
This variable represents the index for the mscAtmIfPnniSig tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfPnniSigVcd 1.3.6.1.4.1.562.36.2.1.114.96.2.2
OBJECT IDENTIFIER    

mscAtmIfPnniSigVcdRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.96.2.2.1
This entry controls the addition and deletion of mscAtmIfPnniSigVcd components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfPnniSigVcdRowStatusEntry

mscAtmIfPnniSigVcdRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.96.2.2.1.1
A single entry in the table represents a single mscAtmIfPnniSigVcd component.
OBJECT-TYPE    
  MscAtmIfPnniSigVcdRowStatusEntry  

mscAtmIfPnniSigVcdRowStatus 1.3.6.1.4.1.562.36.2.1.114.96.2.2.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfPnniSigVcd components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfPnniSigVcdComponentName 1.3.6.1.4.1.562.36.2.1.114.96.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfPnniSigVcdStorageType 1.3.6.1.4.1.562.36.2.1.114.96.2.2.1.1.4
This variable represents the storage type value for the mscAtmIfPnniSigVcd tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfPnniSigVcdIndex 1.3.6.1.4.1.562.36.2.1.114.96.2.2.1.1.10
This variable represents the index for the mscAtmIfPnniSigVcd tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfPnniSigVcdProvTable 1.3.6.1.4.1.562.36.2.1.114.96.2.2.10
This group contains the provisionable traffic attributes for a control channel.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfPnniSigVcdProvEntry

mscAtmIfPnniSigVcdProvEntry 1.3.6.1.4.1.562.36.2.1.114.96.2.2.10.1
An entry in the mscAtmIfPnniSigVcdProvTable.
OBJECT-TYPE    
  MscAtmIfPnniSigVcdProvEntry  

mscAtmIfPnniSigVcdTrafficDescType 1.3.6.1.4.1.562.36.2.1.114.96.2.2.10.1.1
This attribute specifies the type of traffic management which is applied to both the transmit and receive direction of this connection as defined in the ATM Forum. The trafficDescType determines the number and meaning of the parameters in the trafficDescParm attribute.
OBJECT-TYPE    
  INTEGER n3(3), n6(6), n7(7), n8(8)  

mscAtmIfPnniSigVcdAtmServiceCategory 1.3.6.1.4.1.562.36.2.1.114.96.2.2.10.1.3
This attribute specifies the ATM service category for both directions of the connection. The constantBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. The consistent availability of a fixed quantity of bandwidth is considered appropriate for CBR service. Cells which are delayed beyond the value specified by CellTransfer Delay are assumed to be of significantly reduce value to the application. The rtVariableBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. Sources are expected to transmit at a rate which varies with time. Equivalently, the source can be described as 'bursty'. Cells which are delayed beyond the value specified by CTD are assumed to be of significantly reduced value to the application. Real time VBR service may support statistical multiplexing of real time sources. The nrtVariableBitRate service category is intended for non-real time applications which have bursty traffic characteristics and which can be characterized in terms of a PCR, SCR, and MBS. For those cells which are transferred within the traffic contract, the application expects a low cell loss ratio. For all connections, it expects a bound on the mean cell transfer delay. Non-real time VBR service may support statistical multiplexing of connections. The unspecifiedBitRate service is intended for non-real time applications; that is, those not requiring tightly constrained delay and delay variation. UBR sources are expected to be bursty. UBR service supports a high degree of statistical multiplexing among sources. UBR service does not specify traffic related service guarantees. No numerical commitments are made with respect to the cell loss ratio experienced by a UBR connection, or as to the cell transfer delay experienced by cells on the connection.
OBJECT-TYPE    
  INTEGER unspecifiedBitRate(0), constantBitRate(1), rtVariableBitRate(2), nrtVariableBitRate(3)  

mscAtmIfPnniSigVcdWeight 1.3.6.1.4.1.562.36.2.1.114.96.2.2.10.1.4
This attribute specifies an override for the weight of this unshaped connection. This attribute is ignored for shaped connections, for ABR connections, for connections on a CQC-based ATM FP and basic VPTs. When the value is set to sameAsCa, the weight is determined by the weight policy attribute under the CA service category component for all but standard VPT VCCs. For standard VPT VCCs, the weight is determined by the VCC's service category, when the value is set to sameAsCa. When this attribute is set to a value from 1 to 4095, that value is used for the weight policy of this connection relative to other connections. For all but standard VPT VCCs, weight policy determines the proportion of transit cell opportunities which are allocated to this connection, compared to other connections in the same service category. For standard VPT VCCs, weight policy determines the proportion of transmit cell opportunities which are allocated to this connection, compared to other connections associated with the VPT. When the value is set to upToQueueLimit, the weight policy is limited only by the txQueueLimit. VALUES ( 0 = upToQueueLimit 65535 = sameAsCa )
OBJECT-TYPE    
  Unsigned32 0 | 1..4095 | 65535  

mscAtmIfPnniSigVcdQosClass 1.3.6.1.4.1.562.36.2.1.114.96.2.2.10.1.21
This attribute specifies the quality of service for both the forward and backward direction for this connection. Class 1 supports a QOS that meets Service Class A performance requirements (Circuit emulation, constant bit rate video). Class 2 supports a QOS that meets Service Class B performance requirements (Variable bit rate audio and video). Class 3 supports a QOS that meets Service Class C performance requirements (Connection-Oriented Data Transfer). Class 4 supports a QOS that meets Service Class D performance requirements (Connectionless Data Transfer). Class 0 is the unspecified bit rate QOS class; no objective is specified for the performance parameters.
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4)  

mscAtmIfPnniSigVcdTrafficShaping 1.3.6.1.4.1.562.36.2.1.114.96.2.2.10.1.50
This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled.
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

mscAtmIfPnniSigVcdUnshapedTransmitQueueing 1.3.6.1.4.1.562.36.2.1.114.96.2.2.10.1.60
This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this connection if it is unshaped. Refer to the unshapedTransmitQueueing attribute under the AtmIf CA service category subcomponent for more details on the meaning of this attribute. When this attribute is set to sameAsCa, the transmit queueing method for the connection is based on the unshapedTransmitQueueing attribute of the connection's service category component under the ConnectionAdministrator. When this attribute is set to common, transmit traffic on this unshaped connection is destined for the common queue. The value sameAsInterface is for migration from previous software releases, but should no longer be used
OBJECT-TYPE    
  INTEGER common(1), sameAsCa(3)  

mscAtmIfPnniSigVcdUsageParameterControl 1.3.6.1.4.1.562.36.2.1.114.96.2.2.10.1.70
This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface. When sameAsCa is selected, UPC for the connection is based on the usageParameterControl attribute of the connection's service category component under the ConnectionAdministrator. If the service category has UPC enabled, then UPC is enabled for the connection. Note that enabling UPC may have no effect under certain cases. These cases are listed in the description of the usageParameterControl operational attribute, which is under the Vcc Tm or Vpc Tm component. When disabled is selected, UPC for this connection is disabled. The value sameAsInterface is for migration from previous software releases, but should no longer be used
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

mscAtmIfPnniSigVcdTdpTable 1.3.6.1.4.1.562.36.2.1.114.96.2.2.387
This attribute is a vector of five traffic parameters whose meanings are defined by the trafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR) and requested shaping rate are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. CDVT is expressed in microseconds. The values of PCR, SCR, MBS and CDVT are used for connection admission control (CAC). The value of CDVT is only used for connections where the atmServiceCategory is constantBitRate. For all other values of atmServiceCategory, CDVT is ignored. The values of PCR, SCR and requested shaping rate are used to determine the actual shaping rate where traffic shaping is enabled. When trafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3 must be zero. When trafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. Whenever it is valid for PCR to be specified, parameter 5 may also be used to specify a requested shaping rate. A non-zero value in parameter 5 overrides the value in parameter 1 and is used as the peak cell rate in calculations of CAC and shaping rate. For trafficDescType 3 the traffic is shaped at the next rate less than the PCR. For trafficDescType 6, 7, and 8, the traffic is shaped at the highest available rate which is between PCR and SCR. However, if there is no available shaping rate between PCR and SCR, traffic is shaped at the next rate above the PCR.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfPnniSigVcdTdpEntry

mscAtmIfPnniSigVcdTdpEntry 1.3.6.1.4.1.562.36.2.1.114.96.2.2.387.1
An entry in the mscAtmIfPnniSigVcdTdpTable.
OBJECT-TYPE    
  MscAtmIfPnniSigVcdTdpEntry  

mscAtmIfPnniSigVcdTdpIndex 1.3.6.1.4.1.562.36.2.1.114.96.2.2.387.1.1
This variable represents the mscAtmIfPnniSigVcdTdpTable specific index for the mscAtmIfPnniSigVcdTdpTable.
OBJECT-TYPE    
  Integer32 1..5  

mscAtmIfPnniSigVcdTdpValue 1.3.6.1.4.1.562.36.2.1.114.96.2.2.387.1.2
This variable represents an individual value for the mscAtmIfPnniSigVcdTdpTable.
OBJECT-TYPE    
  Unsigned32 0..2147483647  

mscAtmIfPnniSigProvTable 1.3.6.1.4.1.562.36.2.1.114.96.2.10
This attribute group contains the provisionable attributes for the Signalling component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfPnniSigProvEntry

mscAtmIfPnniSigProvEntry 1.3.6.1.4.1.562.36.2.1.114.96.2.10.1
An entry in the mscAtmIfPnniSigProvTable.
OBJECT-TYPE    
  MscAtmIfPnniSigProvEntry  

mscAtmIfPnniSigVci 1.3.6.1.4.1.562.36.2.1.114.96.2.10.1.1
This attribute specifies the signalling channel number.
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAtmIfPnniSigAddressConversion 1.3.6.1.4.1.562.36.2.1.114.96.2.10.1.2
This attribute specifies the address conversion on the outgoing signalling PDUs. The options are none, nativeE164, or nsap. The none option is the default and if this option is chosen then nothing is done to the address information element (IE) in the outgoing signalling message. If nativeE164 option is chosen, then only NSAP encapsulated E.164 addresses with zeros in the ESI are converted to native E.164 format in the outgoing signalling message. If the NSAP address is not encapsulated E.164 or the ESI field is not zeros and the nativeE164 option is chosen, then the call is cleared. If the nsap option is chosen, then native E.164 addresses are converted to NSAP E.164 with zeros in the ESI field; otherwise the address is in NSAP format and is not changed.
OBJECT-TYPE    
  INTEGER none(0), nativeE164(1), nsap(2)  

mscAtmIfPnniSigOperatingMode 1.3.6.1.4.1.562.36.2.1.114.96.2.10.1.3
This attribute specifies the operating mode of the signaling channel. provisionedOnly indicates that only SPVCs and SPVPs are supported on the interface and SVCs are not supported. This value is permitted only on UNI interfaces. normal indicates that SVCs, SPVCs, and SPVPs are supported on the interface.
OBJECT-TYPE    
  INTEGER normal(0), provisionedOnly(1)  

mscAtmIfPnniSigStateTable 1.3.6.1.4.1.562.36.2.1.114.96.2.11
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfPnniSigStateEntry

mscAtmIfPnniSigStateEntry 1.3.6.1.4.1.562.36.2.1.114.96.2.11.1
An entry in the mscAtmIfPnniSigStateTable.
OBJECT-TYPE    
  MscAtmIfPnniSigStateEntry  

mscAtmIfPnniSigAdminState 1.3.6.1.4.1.562.36.2.1.114.96.2.11.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscAtmIfPnniSigOperationalState 1.3.6.1.4.1.562.36.2.1.114.96.2.11.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscAtmIfPnniSigUsageState 1.3.6.1.4.1.562.36.2.1.114.96.2.11.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscAtmIfPnniSigOperTable 1.3.6.1.4.1.562.36.2.1.114.96.2.12
This attribute contains the operational attributes for the AtmSignalling component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfPnniSigOperEntry

mscAtmIfPnniSigOperEntry 1.3.6.1.4.1.562.36.2.1.114.96.2.12.1
An entry in the mscAtmIfPnniSigOperTable.
OBJECT-TYPE    
  MscAtmIfPnniSigOperEntry  

mscAtmIfPnniSigLastTxCauseCode 1.3.6.1.4.1.562.36.2.1.114.96.2.12.1.1
This attribute indicates the cause code in the last transmitted signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages.
OBJECT-TYPE    
  Unsigned32 0..255  

mscAtmIfPnniSigLastTxDiagCode 1.3.6.1.4.1.562.36.2.1.114.96.2.12.1.2
This attribute contains the diagnostic code in the last transmitted signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0.
OBJECT-TYPE    
  Hex 0..255  

mscAtmIfPnniSigLastRxCauseCode 1.3.6.1.4.1.562.36.2.1.114.96.2.12.1.3
This attribute contains the cause code in the last received signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages.
OBJECT-TYPE    
  Unsigned32 0..255  

mscAtmIfPnniSigLastRxDiagCode 1.3.6.1.4.1.562.36.2.1.114.96.2.12.1.4
This attribute contains the diagnostic code in the last received signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0.
OBJECT-TYPE    
  Hex 0..255  

mscAtmIfPnniSigStatsTable 1.3.6.1.4.1.562.36.2.1.114.96.2.13
This attribute group contains the statistics associated with the AtmSignalling component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfPnniSigStatsEntry

mscAtmIfPnniSigStatsEntry 1.3.6.1.4.1.562.36.2.1.114.96.2.13.1
An entry in the mscAtmIfPnniSigStatsTable.
OBJECT-TYPE    
  MscAtmIfPnniSigStatsEntry  

mscAtmIfPnniSigCurrentConnections 1.3.6.1.4.1.562.36.2.1.114.96.2.13.1.1
This attribute indicates the total number of currently active connections.
OBJECT-TYPE    
  Counter32  

mscAtmIfPnniSigPeakConnections 1.3.6.1.4.1.562.36.2.1.114.96.2.13.1.2
This attribute indicates the high water mark of active point-to- point and point-to-multipoint connections.
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAtmIfPnniSigSuccessfulConnections 1.3.6.1.4.1.562.36.2.1.114.96.2.13.1.3
This attribute counts the total number of switched point-to- point and point-to-multipoint connections that were successfully established. The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

mscAtmIfPnniSigFailedConnections 1.3.6.1.4.1.562.36.2.1.114.96.2.13.1.4
This attribute counts the total number of switched connections that were not successfully established.The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

mscAtmIfPnniSigTxPdus 1.3.6.1.4.1.562.36.2.1.114.96.2.13.1.5
This attribute counts the number of transmitted signalling PDUs.The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

mscAtmIfPnniSigRxPdus 1.3.6.1.4.1.562.36.2.1.114.96.2.13.1.6
This attribute counts the number of received signalling PDUs.The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

mscAtmIfPnniSigCurrentPmpConnections 1.3.6.1.4.1.562.36.2.1.114.96.2.13.1.7
This attribute indicates the number of currently active point-to- multipoint connections.
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAtmIfPnniSigPeakPmpConnections 1.3.6.1.4.1.562.36.2.1.114.96.2.13.1.8
This attribute indicates the high water mark of active point-to- multipoint connections.
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAtmIfPnniSigSuccessfulPmpConnections 1.3.6.1.4.1.562.36.2.1.114.96.2.13.1.9
This attribute counts the total number of switched point-to- multipoint connections that were successfully established. The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

mscAtmIfPnniSigFailedPmpConnections 1.3.6.1.4.1.562.36.2.1.114.96.2.13.1.10
This attribute counts the number of switched point-to- multipoint connections that were not successfully established.The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

mscAtmIfPnniSigNewCurrentConnections 1.3.6.1.4.1.562.36.2.1.114.96.2.13.1.11
This attribute indicates the total number of currently active point-to- point and point-to-multipoint connections.
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAtmIfPnniRcc 1.3.6.1.4.1.562.36.2.1.114.96.3
OBJECT IDENTIFIER    

mscAtmIfPnniRccRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.96.3.1
This entry controls the addition and deletion of mscAtmIfPnniRcc components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfPnniRccRowStatusEntry

mscAtmIfPnniRccRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.96.3.1.1
A single entry in the table represents a single mscAtmIfPnniRcc component.
OBJECT-TYPE    
  MscAtmIfPnniRccRowStatusEntry  

mscAtmIfPnniRccRowStatus 1.3.6.1.4.1.562.36.2.1.114.96.3.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfPnniRcc components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfPnniRccComponentName 1.3.6.1.4.1.562.36.2.1.114.96.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfPnniRccStorageType 1.3.6.1.4.1.562.36.2.1.114.96.3.1.1.4
This variable represents the storage type value for the mscAtmIfPnniRcc tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfPnniRccIndex 1.3.6.1.4.1.562.36.2.1.114.96.3.1.1.10
This variable represents the index for the mscAtmIfPnniRcc tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfPnniRccVcd 1.3.6.1.4.1.562.36.2.1.114.96.3.2
OBJECT IDENTIFIER    

mscAtmIfPnniRccVcdRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.96.3.2.1
This entry controls the addition and deletion of mscAtmIfPnniRccVcd components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfPnniRccVcdRowStatusEntry

mscAtmIfPnniRccVcdRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.96.3.2.1.1
A single entry in the table represents a single mscAtmIfPnniRccVcd component.
OBJECT-TYPE    
  MscAtmIfPnniRccVcdRowStatusEntry  

mscAtmIfPnniRccVcdRowStatus 1.3.6.1.4.1.562.36.2.1.114.96.3.2.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfPnniRccVcd components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfPnniRccVcdComponentName 1.3.6.1.4.1.562.36.2.1.114.96.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfPnniRccVcdStorageType 1.3.6.1.4.1.562.36.2.1.114.96.3.2.1.1.4
This variable represents the storage type value for the mscAtmIfPnniRccVcd tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfPnniRccVcdIndex 1.3.6.1.4.1.562.36.2.1.114.96.3.2.1.1.10
This variable represents the index for the mscAtmIfPnniRccVcd tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfPnniRccVcdProvTable 1.3.6.1.4.1.562.36.2.1.114.96.3.2.10
This group contains the provisionable traffic attributes for a control channel.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfPnniRccVcdProvEntry

mscAtmIfPnniRccVcdProvEntry 1.3.6.1.4.1.562.36.2.1.114.96.3.2.10.1
An entry in the mscAtmIfPnniRccVcdProvTable.
OBJECT-TYPE    
  MscAtmIfPnniRccVcdProvEntry  

mscAtmIfPnniRccVcdTrafficDescType 1.3.6.1.4.1.562.36.2.1.114.96.3.2.10.1.1
This attribute specifies the type of traffic management which is applied to both the transmit and receive direction of this connection as defined in the ATM Forum. The trafficDescType determines the number and meaning of the parameters in the trafficDescParm attribute.
OBJECT-TYPE    
  INTEGER n3(3), n6(6), n7(7), n8(8)  

mscAtmIfPnniRccVcdAtmServiceCategory 1.3.6.1.4.1.562.36.2.1.114.96.3.2.10.1.3
This attribute specifies the ATM service category for both directions of the connection. The constantBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. The consistent availability of a fixed quantity of bandwidth is considered appropriate for CBR service. Cells which are delayed beyond the value specified by CellTransfer Delay are assumed to be of significantly reduce value to the application. The rtVariableBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. Sources are expected to transmit at a rate which varies with time. Equivalently, the source can be described as 'bursty'. Cells which are delayed beyond the value specified by CTD are assumed to be of significantly reduced value to the application. Real time VBR service may support statistical multiplexing of real time sources. The nrtVariableBitRate service category is intended for non-real time applications which have bursty traffic characteristics and which can be characterized in terms of a PCR, SCR, and MBS. For those cells which are transferred within the traffic contract, the application expects a low cell loss ratio. For all connections, it expects a bound on the mean cell transfer delay. Non-real time VBR service may support statistical multiplexing of connections. The unspecifiedBitRate service is intended for non-real time applications; that is, those not requiring tightly constrained delay and delay variation. UBR sources are expected to be bursty. UBR service supports a high degree of statistical multiplexing among sources. UBR service does not specify traffic related service guarantees. No numerical commitments are made with respect to the cell loss ratio experienced by a UBR connection, or as to the cell transfer delay experienced by cells on the connection.
OBJECT-TYPE    
  INTEGER unspecifiedBitRate(0), constantBitRate(1), rtVariableBitRate(2), nrtVariableBitRate(3)  

mscAtmIfPnniRccVcdWeight 1.3.6.1.4.1.562.36.2.1.114.96.3.2.10.1.4
This attribute specifies an override for the weight of this unshaped connection. This attribute is ignored for shaped connections, for ABR connections, for connections on a CQC-based ATM FP and basic VPTs. When the value is set to sameAsCa, the weight is determined by the weight policy attribute under the CA service category component for all but standard VPT VCCs. For standard VPT VCCs, the weight is determined by the VCC's service category, when the value is set to sameAsCa. When this attribute is set to a value from 1 to 4095, that value is used for the weight policy of this connection relative to other connections. For all but standard VPT VCCs, weight policy determines the proportion of transit cell opportunities which are allocated to this connection, compared to other connections in the same service category. For standard VPT VCCs, weight policy determines the proportion of transmit cell opportunities which are allocated to this connection, compared to other connections associated with the VPT. When the value is set to upToQueueLimit, the weight policy is limited only by the txQueueLimit. VALUES ( 0 = upToQueueLimit 65535 = sameAsCa )
OBJECT-TYPE    
  Unsigned32 0 | 1..4095 | 65535  

mscAtmIfPnniRccVcdQosClass 1.3.6.1.4.1.562.36.2.1.114.96.3.2.10.1.21
This attribute specifies the quality of service for both the forward and backward direction for this connection. Class 1 supports a QOS that meets Service Class A performance requirements (Circuit emulation, constant bit rate video). Class 2 supports a QOS that meets Service Class B performance requirements (Variable bit rate audio and video). Class 3 supports a QOS that meets Service Class C performance requirements (Connection-Oriented Data Transfer). Class 4 supports a QOS that meets Service Class D performance requirements (Connectionless Data Transfer). Class 0 is the unspecified bit rate QOS class; no objective is specified for the performance parameters.
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4)  

mscAtmIfPnniRccVcdTrafficShaping 1.3.6.1.4.1.562.36.2.1.114.96.3.2.10.1.50
This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled.
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

mscAtmIfPnniRccVcdUnshapedTransmitQueueing 1.3.6.1.4.1.562.36.2.1.114.96.3.2.10.1.60
This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this connection if it is unshaped. Refer to the unshapedTransmitQueueing attribute under the AtmIf CA service category subcomponent for more details on the meaning of this attribute. When this attribute is set to sameAsCa, the transmit queueing method for the connection is based on the unshapedTransmitQueueing attribute of the connection's service category component under the ConnectionAdministrator. When this attribute is set to common, transmit traffic on this unshaped connection is destined for the common queue. The value sameAsInterface is for migration from previous software releases, but should no longer be used
OBJECT-TYPE    
  INTEGER common(1), sameAsCa(3)  

mscAtmIfPnniRccVcdUsageParameterControl 1.3.6.1.4.1.562.36.2.1.114.96.3.2.10.1.70
This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface. When sameAsCa is selected, UPC for the connection is based on the usageParameterControl attribute of the connection's service category component under the ConnectionAdministrator. If the service category has UPC enabled, then UPC is enabled for the connection. Note that enabling UPC may have no effect under certain cases. These cases are listed in the description of the usageParameterControl operational attribute, which is under the Vcc Tm or Vpc Tm component. When disabled is selected, UPC for this connection is disabled. The value sameAsInterface is for migration from previous software releases, but should no longer be used
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

mscAtmIfPnniRccVcdTdpTable 1.3.6.1.4.1.562.36.2.1.114.96.3.2.387
This attribute is a vector of five traffic parameters whose meanings are defined by the trafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR) and requested shaping rate are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. CDVT is expressed in microseconds. The values of PCR, SCR, MBS and CDVT are used for connection admission control (CAC). The value of CDVT is only used for connections where the atmServiceCategory is constantBitRate. For all other values of atmServiceCategory, CDVT is ignored. The values of PCR, SCR and requested shaping rate are used to determine the actual shaping rate where traffic shaping is enabled. When trafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3 must be zero. When trafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. Whenever it is valid for PCR to be specified, parameter 5 may also be used to specify a requested shaping rate. A non-zero value in parameter 5 overrides the value in parameter 1 and is used as the peak cell rate in calculations of CAC and shaping rate. For trafficDescType 3 the traffic is shaped at the next rate less than the PCR. For trafficDescType 6, 7, and 8, the traffic is shaped at the highest available rate which is between PCR and SCR. However, if there is no available shaping rate between PCR and SCR, traffic is shaped at the next rate above the PCR.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfPnniRccVcdTdpEntry

mscAtmIfPnniRccVcdTdpEntry 1.3.6.1.4.1.562.36.2.1.114.96.3.2.387.1
An entry in the mscAtmIfPnniRccVcdTdpTable.
OBJECT-TYPE    
  MscAtmIfPnniRccVcdTdpEntry  

mscAtmIfPnniRccVcdTdpIndex 1.3.6.1.4.1.562.36.2.1.114.96.3.2.387.1.1
This variable represents the mscAtmIfPnniRccVcdTdpTable specific index for the mscAtmIfPnniRccVcdTdpTable.
OBJECT-TYPE    
  Integer32 1..5  

mscAtmIfPnniRccVcdTdpValue 1.3.6.1.4.1.562.36.2.1.114.96.3.2.387.1.2
This variable represents an individual value for the mscAtmIfPnniRccVcdTdpTable.
OBJECT-TYPE    
  Unsigned32 0..2147483647  

mscAtmIfPnniRccProvTable 1.3.6.1.4.1.562.36.2.1.114.96.3.10
This group contains the generic provisionable attributes of an Rcc component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfPnniRccProvEntry

mscAtmIfPnniRccProvEntry 1.3.6.1.4.1.562.36.2.1.114.96.3.10.1
An entry in the mscAtmIfPnniRccProvTable.
OBJECT-TYPE    
  MscAtmIfPnniRccProvEntry  

mscAtmIfPnniRccVci 1.3.6.1.4.1.562.36.2.1.114.96.3.10.1.1
This attribute specifies the VCI for the Routing Control Channel (RCC). It is not recommended that the value be changed from the default of 18 unless absolutely necessary. If a different VCI is specified, ensure that the RCC at the far end is provisioned to use the same VCI, otherwise the RCC will not come up.
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAtmIfPnniRccHlParmsTable 1.3.6.1.4.1.562.36.2.1.114.96.3.11
This group contains the provisionable Hello protocol parameters for an Rcc component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfPnniRccHlParmsEntry

mscAtmIfPnniRccHlParmsEntry 1.3.6.1.4.1.562.36.2.1.114.96.3.11.1
An entry in the mscAtmIfPnniRccHlParmsTable.
OBJECT-TYPE    
  MscAtmIfPnniRccHlParmsEntry  

mscAtmIfPnniRccHelloHoldDown 1.3.6.1.4.1.562.36.2.1.114.96.3.11.1.1
This attribute is used to limit the rate at which this node sends out Hello packets. Specifically, it specifies the minimum time between successive Hellos. A value of 0 specifies that the value provisioned for the helloHoldDown attribute of the ARtg Pnni component should be used.
OBJECT-TYPE    
  FixedPoint1 0..655350  

mscAtmIfPnniRccHelloInterval 1.3.6.1.4.1.562.36.2.1.114.96.3.11.1.2
This attribute specifies the duration of the Hello Timer. Every helloInterval seconds, this node will send out a Hello packet to the neighbor node, subject to the helloHoldDown timer having expired at least once since the last Hello packet was sent. A value of 0 specifies that the value provisioned for the helloInterval attribute of the ARtg Pnni component should be used.
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAtmIfPnniRccHelloInactivityFactor 1.3.6.1.4.1.562.36.2.1.114.96.3.11.1.3
This attribute specifies the number of Hello intervals allowed to pass without receiving a Hello from the neighbor node, before an attempt is made to re-stage. The hello inactivity timer is enabled in the oneWayInside, twoWayInside, oneWayOutside, twoWayOutside and commonOutside hello states (see the helloState attribute on the Rcc component for a description of these states). Note that the value for the Hello interval used in the calculation is the one specified in the Hello packet from the neighbor node. A value of 0 specifies that the value provisioned for the helloInactivityFactor attribute of the ARtg Pnni component should be used. DESCRIPTION
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAtmIfPnniRccStateTable 1.3.6.1.4.1.562.36.2.1.114.96.3.12
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfPnniRccStateEntry

mscAtmIfPnniRccStateEntry 1.3.6.1.4.1.562.36.2.1.114.96.3.12.1
An entry in the mscAtmIfPnniRccStateTable.
OBJECT-TYPE    
  MscAtmIfPnniRccStateEntry  

mscAtmIfPnniRccAdminState 1.3.6.1.4.1.562.36.2.1.114.96.3.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscAtmIfPnniRccOperationalState 1.3.6.1.4.1.562.36.2.1.114.96.3.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscAtmIfPnniRccUsageState 1.3.6.1.4.1.562.36.2.1.114.96.3.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscAtmIfPnniRccOperTable 1.3.6.1.4.1.562.36.2.1.114.96.3.13
This group contains the operational attributes for an Rcc component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfPnniRccOperEntry

mscAtmIfPnniRccOperEntry 1.3.6.1.4.1.562.36.2.1.114.96.3.13.1
An entry in the mscAtmIfPnniRccOperTable.
OBJECT-TYPE    
  MscAtmIfPnniRccOperEntry  

mscAtmIfPnniRccType 1.3.6.1.4.1.562.36.2.1.114.96.3.13.1.1
This attribute indicates the role of this link in the PNNI hierarchy. The following values are possible: unknown: the Hello protocol has not yet determined the role of the link. lowestLevelHorizLink: the link is a horizontal link between two lowest level nodes. lowestLevelOutsideLink: the link is an outside link between two border nodes. horizontalLinkToLgn: the link is a horizontal link to a Logical Group Node (LGN). uplink: the link is a uplink to a higher level LGN.
OBJECT-TYPE    
  INTEGER unknown(0), lowestLevelHorizLink(1), lowestLevelOutsideLink(2), horizontalLinkToLGN(3), uplink(4)  

mscAtmIfPnniRccNegotiatedVersion 1.3.6.1.4.1.562.36.2.1.114.96.3.13.1.2
This attribute indicates the PNNI version negotiated with the neighbor node.
OBJECT-TYPE    
  INTEGER unsupported(0), version1point0(1)  

mscAtmIfPnniRccHelloState 1.3.6.1.4.1.562.36.2.1.114.96.3.13.1.3
This attribute indicates the state of the Hello protocol exchange over this link. The following are the possible values for this attribute: down: the link is down; no PNNI routing packets will be sent over or received over such a link. This is the initial state of the Hello Finite State Machine, and can also be reached when lower-level protocols have indicated that the link is not usable. attempt: no Hello packets or Hello packets, with mismatch information, have been received recently from the neighbor. Attempts are made to contact the neighbor node by sending out Hello packets every helloInterval seconds. oneWayInside: Hello packets have been recently received from the neighbor and it has been established that both nodes are members of the same peer group, but the remote node ID and remote port ID in the neighbor's Hello packets were set to zero. A Hello packet is sent to the neighbor and the Hello timer is restarted. twoWayInside: Bidirectional communication over this link between this node and the neighbor node has been achieved. oneWayOutside: Hello packets have been recently received from the neighbor and it has been established that both nodes are members of a different peer group, but the remote node ID and remote port ID in the neighbor's Hello packets were set to zero. twoWayOutside: Hellos have recently been received from the neighbor indicating that the neighbor node belongs to a different peer group. The correct remote node ID and remote port ID fields were included in the Hello packet, but the nodal hierarchy list did not include any common peer group. This state can also be reached if a hierarchy mismatch occurs while in the commonOutside state. commonOutside: A common level of the routing hierarchy has been found, in addition to achieving full bi-directional communication between the two nodes.
OBJECT-TYPE    
  INTEGER notApplicable(0), down(1), attempt(2), oneWayInside(3), twoWayInside(4), oneWayOutside(5), twoWayOutside(6), commonOutside(7)  

mscAtmIfPnniRccRemoteNodeId 1.3.6.1.4.1.562.36.2.1.114.96.3.13.1.4
This attribute indicates the neighbor node's node id.
OBJECT-TYPE    
  HexString SIZE(22)  

mscAtmIfPnniRccRemotePortId 1.3.6.1.4.1.562.36.2.1.114.96.3.13.1.5
This attribute indicates the neighbor node's port id.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscAtmIfPnniRccStatsTable 1.3.6.1.4.1.562.36.2.1.114.96.3.14
This group contains the statistical attributes for an Rcc component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfPnniRccStatsEntry

mscAtmIfPnniRccStatsEntry 1.3.6.1.4.1.562.36.2.1.114.96.3.14.1
An entry in the mscAtmIfPnniRccStatsTable.
OBJECT-TYPE    
  MscAtmIfPnniRccStatsEntry  

mscAtmIfPnniRccHelloPacketsRx 1.3.6.1.4.1.562.36.2.1.114.96.3.14.1.1
This attribute counts the total number of Hello packets received across this RCC, including bad and mismatched Hello packets. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscAtmIfPnniRccHelloPacketsTx 1.3.6.1.4.1.562.36.2.1.114.96.3.14.1.2
This attribute counts the total number of Hello packets transmitted across this RCC. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscAtmIfPnniRccMismatchedHelloPacketsRx 1.3.6.1.4.1.562.36.2.1.114.96.3.14.1.3
This attribute counts the total number of mismatched Hello packets received over this RCC. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscAtmIfPnniRccBadHelloPacketsRx 1.3.6.1.4.1.562.36.2.1.114.96.3.14.1.4
This attribute counts the total number of bad Hello packets received over this RCC. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscAtmIfPnniAddr 1.3.6.1.4.1.562.36.2.1.114.96.4
OBJECT IDENTIFIER    

mscAtmIfPnniAddrRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.96.4.1
This entry controls the addition and deletion of mscAtmIfPnniAddr components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfPnniAddrRowStatusEntry

mscAtmIfPnniAddrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.96.4.1.1
A single entry in the table represents a single mscAtmIfPnniAddr component.
OBJECT-TYPE    
  MscAtmIfPnniAddrRowStatusEntry  

mscAtmIfPnniAddrRowStatus 1.3.6.1.4.1.562.36.2.1.114.96.4.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfPnniAddr components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfPnniAddrComponentName 1.3.6.1.4.1.562.36.2.1.114.96.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfPnniAddrStorageType 1.3.6.1.4.1.562.36.2.1.114.96.4.1.1.4
This variable represents the storage type value for the mscAtmIfPnniAddr tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfPnniAddrAddressIndex 1.3.6.1.4.1.562.36.2.1.114.96.4.1.1.10
This variable represents an index for the mscAtmIfPnniAddr tables.
OBJECT-TYPE    
  AsciiStringIndex SIZE(1..40)  

mscAtmIfPnniAddrAddressTypeIndex 1.3.6.1.4.1.562.36.2.1.114.96.4.1.1.11
This variable represents an index for the mscAtmIfPnniAddr tables.
OBJECT-TYPE    
  INTEGER primary(0), alternate(1), registered(2), default(3)  

mscAtmIfPnniAddrTermSP 1.3.6.1.4.1.562.36.2.1.114.96.4.2
OBJECT IDENTIFIER    

mscAtmIfPnniAddrTermSPRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.96.4.2.1
This entry controls the addition and deletion of mscAtmIfPnniAddrTermSP components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfPnniAddrTermSPRowStatusEntry

mscAtmIfPnniAddrTermSPRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.96.4.2.1.1
A single entry in the table represents a single mscAtmIfPnniAddrTermSP component.
OBJECT-TYPE    
  MscAtmIfPnniAddrTermSPRowStatusEntry  

mscAtmIfPnniAddrTermSPRowStatus 1.3.6.1.4.1.562.36.2.1.114.96.4.2.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfPnniAddrTermSP components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfPnniAddrTermSPComponentName 1.3.6.1.4.1.562.36.2.1.114.96.4.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfPnniAddrTermSPStorageType 1.3.6.1.4.1.562.36.2.1.114.96.4.2.1.1.4
This variable represents the storage type value for the mscAtmIfPnniAddrTermSP tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfPnniAddrTermSPIndex 1.3.6.1.4.1.562.36.2.1.114.96.4.2.1.1.10
This variable represents the index for the mscAtmIfPnniAddrTermSP tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfPnniAddrPnniInfo 1.3.6.1.4.1.562.36.2.1.114.96.4.3
OBJECT IDENTIFIER    

mscAtmIfPnniAddrPnniInfoRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.96.4.3.1
This entry controls the addition and deletion of mscAtmIfPnniAddrPnniInfo components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfPnniAddrPnniInfoRowStatusEntry

mscAtmIfPnniAddrPnniInfoRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.96.4.3.1.1
A single entry in the table represents a single mscAtmIfPnniAddrPnniInfo component.
OBJECT-TYPE    
  MscAtmIfPnniAddrPnniInfoRowStatusEntry  

mscAtmIfPnniAddrPnniInfoRowStatus 1.3.6.1.4.1.562.36.2.1.114.96.4.3.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfPnniAddrPnniInfo components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfPnniAddrPnniInfoComponentName 1.3.6.1.4.1.562.36.2.1.114.96.4.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfPnniAddrPnniInfoStorageType 1.3.6.1.4.1.562.36.2.1.114.96.4.3.1.1.4
This variable represents the storage type value for the mscAtmIfPnniAddrPnniInfo tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfPnniAddrPnniInfoIndex 1.3.6.1.4.1.562.36.2.1.114.96.4.3.1.1.10
This variable represents the index for the mscAtmIfPnniAddrPnniInfo tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfPnniAddrPnniInfoProvTable 1.3.6.1.4.1.562.36.2.1.114.96.4.3.10
This attribute group contains the provisioned attributes relating to PNNI for a PnniInfo component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfPnniAddrPnniInfoProvEntry

mscAtmIfPnniAddrPnniInfoProvEntry 1.3.6.1.4.1.562.36.2.1.114.96.4.3.10.1
An entry in the mscAtmIfPnniAddrPnniInfoProvTable.
OBJECT-TYPE    
  MscAtmIfPnniAddrPnniInfoProvEntry  

mscAtmIfPnniAddrPnniInfoScope 1.3.6.1.4.1.562.36.2.1.114.96.4.3.10.1.1
This attribute specifies the scope of the ATM address, which is the highest level up to which this address will be advertised in the PNNI hierarchy. The scope must be set to a value numerically less than or equal to the level of the lowest level peer group containing this node. Setting the scope to 0 will cause the address to be advertised globally within this PNNI routing domain.
OBJECT-TYPE    
  INTEGER -1..104  

mscAtmIfPnniAddrPnniInfoReachability 1.3.6.1.4.1.562.36.2.1.114.96.4.3.10.1.2
This attribute indicates whether the address is internal or exterior. An internal reachable address is an address of a destination that is directly attached to the logical node advertising the address. An exterior reachable address is an address that can be reached through a PNNI routing domain, but which is not located in that PNNI routing domain.
OBJECT-TYPE    
  INTEGER internal(0), exterior(1)  

mscAtmIfPnniAddrOperTable 1.3.6.1.4.1.562.36.2.1.114.96.4.10
This attribute group contains the operational attributes for the Address component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfPnniAddrOperEntry

mscAtmIfPnniAddrOperEntry 1.3.6.1.4.1.562.36.2.1.114.96.4.10.1
An entry in the mscAtmIfPnniAddrOperTable.
OBJECT-TYPE    
  MscAtmIfPnniAddrOperEntry  

mscAtmIfPnniAddrScope 1.3.6.1.4.1.562.36.2.1.114.96.4.10.1.1
This attribute indicates the scope of the ATM address, which is the highest level to which this address will be advertised in the PNNI hierarchy. If no PnniInfo subcomponent has been provisioned, then the scope will default to the level of this node in the PNNI hierarchy. If this node does not participate in a PNNI hierarchy, then this attribute will have the value of -1.
OBJECT-TYPE    
  INTEGER -1..104  

mscAtmIfPnniAddrReachability 1.3.6.1.4.1.562.36.2.1.114.96.4.10.1.2
This attribute indicates whether the address is internal or exterior. An internal reachable address is an address of a destination that is directly attached to the logical node advertising the address. An exterior reachable address is an address that can be reached through a PNNI routing domain, but which is not located in that PNNI routing domain.
OBJECT-TYPE    
  INTEGER internal(0), exterior(1)  

mscAtmIfPnniProvTable 1.3.6.1.4.1.562.36.2.1.114.96.10
This group contains the provisionable attributes for the Pnni component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfPnniProvEntry

mscAtmIfPnniProvEntry 1.3.6.1.4.1.562.36.2.1.114.96.10.1
An entry in the mscAtmIfPnniProvTable.
OBJECT-TYPE    
  MscAtmIfPnniProvEntry  

mscAtmIfPnniSoftPvcRetryPeriod 1.3.6.1.4.1.562.36.2.1.114.96.10.1.1
This attribute represents the time in seconds to wait between call setup retries. The resolution is to the nearest 10 seconds. This attribute has been obsoleted and is replaced by the softPvpAndPvcRetryPeriod attribute.
OBJECT-TYPE    
  Unsigned32 20..999999  

mscAtmIfPnniSoftPvpAndPvcRetryPeriod 1.3.6.1.4.1.562.36.2.1.114.96.10.1.2
This attribute represents the time in seconds to wait between soft PVP or soft PVC call setup retries. The resolution is to the nearest 10 seconds.
OBJECT-TYPE    
  Unsigned32 20..999999  

mscAtmIfPnniSoftPvpAndPvcHoldOffTime 1.3.6.1.4.1.562.36.2.1.114.96.10.1.5
This attribute specifies how long to hold off retries following a release or the connection. The resolution is to the nearest 50 ms.
OBJECT-TYPE    
  Unsigned32 0 | 50..20000  

mscAtmIfPnniAdminWeightsTable 1.3.6.1.4.1.562.36.2.1.114.96.11
This group contains the provisionable administrative weights for the Pnni component. These weights will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfPnniAdminWeightsEntry

mscAtmIfPnniAdminWeightsEntry 1.3.6.1.4.1.562.36.2.1.114.96.11.1
An entry in the mscAtmIfPnniAdminWeightsTable.
OBJECT-TYPE    
  MscAtmIfPnniAdminWeightsEntry  

mscAtmIfPnniCbrWeight 1.3.6.1.4.1.562.36.2.1.114.96.11.1.1
This attribute specifies the administrative weight assigned for setting up switched calls with a service category of Constant Bit Rate (CBR) for this PNNI interface. The value specified will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion; the higher the value, the less desirable the link will be in path selection.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscAtmIfPnniRtVbrWeight 1.3.6.1.4.1.562.36.2.1.114.96.11.1.2
This attribute specifies the administrative weight assigned for setting up switched calls with a service category of Real-Time Variable Bit Rate (RT-VBR) for this PNNI interface. The value specified will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion; the higher the value, the less desirable the link will be in path selection.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscAtmIfPnniNrtVbrWeight 1.3.6.1.4.1.562.36.2.1.114.96.11.1.3
This attribute specifies the administrative weight assigned for setting up switched calls with a service category of Non Real-Time Variable Bit Rate (NRT-VBR) for this PNNI interface. The value specified will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion; the higher the value, the less desirable the link will be in path selection.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscAtmIfPnniUbrWeight 1.3.6.1.4.1.562.36.2.1.114.96.11.1.4
This attribute specifies the administrative weight assigned for setting up switched calls with a service category of Unspecified Bit Rate (UBR) for this PNNI interface. The value specified will be used by Generic Connection Admission Control (GCAC) if administrative weight is the selected optimization criterion; the higher the value, the less desirable the link will be in path selection.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscAtmIfPnniAcctOptTable 1.3.6.1.4.1.562.36.2.1.114.96.12
This group contains the provisionable attributes for accounting.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfPnniAcctOptEntry

mscAtmIfPnniAcctOptEntry 1.3.6.1.4.1.562.36.2.1.114.96.12.1
An entry in the mscAtmIfPnniAcctOptTable.
OBJECT-TYPE    
  MscAtmIfPnniAcctOptEntry  

mscAtmIfPnniAccountCollection 1.3.6.1.4.1.562.36.2.1.114.96.12.1.1
This attribute is used to turn accounting on or off for SVC and SPVC connections. It also specifies the reason(s) for which accounting data is collected: billing, test, study, audit, or force. If the set of reasons is not empty then accounting records will be generated by this interface in the following situations: - on a TODA changeover if TODA is enabled; - every 12 hours (per connection) if TODA is disabled; - on every call clear (a call record with final cell counts). If none of the reasons is present, then accounting will be suppressed. The reason for collection is recorded in the accounting record, in the attribute callingCollectReason or calledCollectReason as appropriate. Description of bits: bill(0) test(1) study(2) audit(3) force(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscAtmIfPnniAccountConnectionType 1.3.6.1.4.1.562.36.2.1.114.96.12.1.2
This attribute specifies whether accounting records generated by this interface should be marked as originating, terminating or intermediate. This attribute, in combination with the direction of the call, determines the value of attribute connPointType of the accounting record and may be used by downstream accounting processes to correlate the records. If the value is origTerm then records generated for incoming calls will be marked as originating and records generated for outgoing calls will be marked as terminating. If the value is intermediate then records generated for all calls will be marked as intermediate.
OBJECT-TYPE    
  INTEGER origTerm(0), intermediate(1)  

mscAtmIfPnniAccountClass 1.3.6.1.4.1.562.36.2.1.114.96.12.1.3
This attribute specifies the accounting class associated with the interface. Its meaning is determined by the network operator. Its value is simply recorded in the accounting records generated by this interface, in the attribute callingServiceType or calledServiceType as appropriate.
OBJECT-TYPE    
  Unsigned32 0..255  

mscAtmIfPnniServiceExchange 1.3.6.1.4.1.562.36.2.1.114.96.12.1.4
This attribute specifies the data service exchange associated with this interface. Its meaning is determined by the network operator. Its value is simply recorded in the accounting records generated by this interface, in the attribute callingDse or calledDse as appropriate.
OBJECT-TYPE    
  Unsigned32 0..255  

mscAtmIfPnniOperationalTable 1.3.6.1.4.1.562.36.2.1.114.96.13
This group contains the operational attributes for a Pnni component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfPnniOperationalEntry

mscAtmIfPnniOperationalEntry 1.3.6.1.4.1.562.36.2.1.114.96.13.1
An entry in the mscAtmIfPnniOperationalTable.
OBJECT-TYPE    
  MscAtmIfPnniOperationalEntry  

mscAtmIfPnniPortId 1.3.6.1.4.1.562.36.2.1.114.96.13.1.1
This attribute indicates the port id of the PNNI interface, which is the parent AtmIf's instance number.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

atmPnniMIB 1.3.6.1.4.1.562.36.2.2.72
OBJECT IDENTIFIER    

atmPnniGroup 1.3.6.1.4.1.562.36.2.2.72.1
OBJECT IDENTIFIER    

atmPnniGroupCA 1.3.6.1.4.1.562.36.2.2.72.1.1
OBJECT IDENTIFIER    

atmPnniGroupCA02 1.3.6.1.4.1.562.36.2.2.72.1.1.3
OBJECT IDENTIFIER    

atmPnniGroupCA02A 1.3.6.1.4.1.562.36.2.2.72.1.1.3.2
OBJECT IDENTIFIER    

atmPnniCapabilities 1.3.6.1.4.1.562.36.2.2.72.3
OBJECT IDENTIFIER    

atmPnniCapabilitiesCA 1.3.6.1.4.1.562.36.2.2.72.3.1
OBJECT IDENTIFIER    

atmPnniCapabilitiesCA02 1.3.6.1.4.1.562.36.2.2.72.3.1.3
OBJECT IDENTIFIER    

atmPnniCapabilitiesCA02A 1.3.6.1.4.1.562.36.2.2.72.3.1.3.2
OBJECT IDENTIFIER    

Defined Objects

MscAtmIfVptPnniRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfVptPnniRowStatus  
  DisplayString as mscAtmIfVptPnniComponentName  
  StorageType as mscAtmIfVptPnniStorageType  
  NonReplicated as mscAtmIfVptPnniIndex  

MscAtmIfVptPnniProvEntry  
SEQUENCE    
  Unsigned32 as mscAtmIfVptPnniSoftPvcRetryPeriod  
  Unsigned32 as mscAtmIfVptPnniSoftPvpAndPvcRetryPeriod  
  Unsigned32 as mscAtmIfVptPnniSoftPvpAndPvcHoldOffTime  

MscAtmIfVptPnniAdminWeightsEntry  
SEQUENCE    
  Unsigned32 as mscAtmIfVptPnniCbrWeight  
  Unsigned32 as mscAtmIfVptPnniRtVbrWeight  
  Unsigned32 as mscAtmIfVptPnniNrtVbrWeight  
  Unsigned32 as mscAtmIfVptPnniUbrWeight  

MscAtmIfVptPnniAcctOptEntry  
SEQUENCE    
  OCTET STRING as mscAtmIfVptPnniAccountCollection  
  INTEGER as mscAtmIfVptPnniAccountConnectionType  
  Unsigned32 as mscAtmIfVptPnniAccountClass  
  Unsigned32 as mscAtmIfVptPnniServiceExchange  

MscAtmIfVptPnniOperationalEntry  
SEQUENCE    
  Unsigned32 as mscAtmIfVptPnniPortId  

MscAtmIfVptPnniVProvEntry  
SEQUENCE    
  Unsigned32 as mscAtmIfVptPnniVpci  

MscAtmIfVptPnniSigRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfVptPnniSigRowStatus  
  DisplayString as mscAtmIfVptPnniSigComponentName  
  StorageType as mscAtmIfVptPnniSigStorageType  
  NonReplicated as mscAtmIfVptPnniSigIndex  

MscAtmIfVptPnniSigProvEntry  
SEQUENCE    
  Unsigned32 as mscAtmIfVptPnniSigVci  
  INTEGER as mscAtmIfVptPnniSigAddressConversion  
  INTEGER as mscAtmIfVptPnniSigOperatingMode  

MscAtmIfVptPnniSigStateEntry  
SEQUENCE    
  INTEGER as mscAtmIfVptPnniSigAdminState  
  INTEGER as mscAtmIfVptPnniSigOperationalState  
  INTEGER as mscAtmIfVptPnniSigUsageState  

MscAtmIfVptPnniSigOperEntry  
SEQUENCE    
  Unsigned32 as mscAtmIfVptPnniSigLastTxCauseCode  
  Hex as mscAtmIfVptPnniSigLastTxDiagCode  
  Unsigned32 as mscAtmIfVptPnniSigLastRxCauseCode  
  Hex as mscAtmIfVptPnniSigLastRxDiagCode  

MscAtmIfVptPnniSigStatsEntry  
SEQUENCE    
  Counter32 as mscAtmIfVptPnniSigCurrentConnections  
  Gauge32 as mscAtmIfVptPnniSigPeakConnections  
  Counter32 as mscAtmIfVptPnniSigSuccessfulConnections  
  Counter32 as mscAtmIfVptPnniSigFailedConnections  
  Counter32 as mscAtmIfVptPnniSigTxPdus  
  Counter32 as mscAtmIfVptPnniSigRxPdus  
  Gauge32 as mscAtmIfVptPnniSigCurrentPmpConnections  
  Gauge32 as mscAtmIfVptPnniSigPeakPmpConnections  
  Counter32 as mscAtmIfVptPnniSigSuccessfulPmpConnections  
  Counter32 as mscAtmIfVptPnniSigFailedPmpConnections  
  Gauge32 as mscAtmIfVptPnniSigNewCurrentConnections  

MscAtmIfVptPnniSigVcdRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfVptPnniSigVcdRowStatus  
  DisplayString as mscAtmIfVptPnniSigVcdComponentName  
  StorageType as mscAtmIfVptPnniSigVcdStorageType  
  NonReplicated as mscAtmIfVptPnniSigVcdIndex  

MscAtmIfVptPnniSigVcdProvEntry  
SEQUENCE    
  INTEGER as mscAtmIfVptPnniSigVcdTrafficDescType  
  INTEGER as mscAtmIfVptPnniSigVcdAtmServiceCategory  
  Unsigned32 as mscAtmIfVptPnniSigVcdWeight  
  INTEGER as mscAtmIfVptPnniSigVcdQosClass  
  INTEGER as mscAtmIfVptPnniSigVcdTrafficShaping  
  INTEGER as mscAtmIfVptPnniSigVcdUnshapedTransmitQueueing  
  INTEGER as mscAtmIfVptPnniSigVcdUsageParameterControl  

MscAtmIfVptPnniSigVcdTdpEntry  
SEQUENCE    
  Integer32 as mscAtmIfVptPnniSigVcdTdpIndex  
  Unsigned32 as mscAtmIfVptPnniSigVcdTdpValue  

MscAtmIfVptPnniRccRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfVptPnniRccRowStatus  
  DisplayString as mscAtmIfVptPnniRccComponentName  
  StorageType as mscAtmIfVptPnniRccStorageType  
  NonReplicated as mscAtmIfVptPnniRccIndex  

MscAtmIfVptPnniRccProvEntry  
SEQUENCE    
  Unsigned32 as mscAtmIfVptPnniRccVci  

MscAtmIfVptPnniRccHlParmsEntry  
SEQUENCE    
  FixedPoint1 as mscAtmIfVptPnniRccHelloHoldDown  
  Unsigned32 as mscAtmIfVptPnniRccHelloInterval  
  Unsigned32 as mscAtmIfVptPnniRccHelloInactivityFactor  

MscAtmIfVptPnniRccStateEntry  
SEQUENCE    
  INTEGER as mscAtmIfVptPnniRccAdminState  
  INTEGER as mscAtmIfVptPnniRccOperationalState  
  INTEGER as mscAtmIfVptPnniRccUsageState  

MscAtmIfVptPnniRccOperEntry  
SEQUENCE    
  INTEGER as mscAtmIfVptPnniRccType  
  INTEGER as mscAtmIfVptPnniRccNegotiatedVersion  
  INTEGER as mscAtmIfVptPnniRccHelloState  
  HexString as mscAtmIfVptPnniRccRemoteNodeId  
  Unsigned32 as mscAtmIfVptPnniRccRemotePortId  

MscAtmIfVptPnniRccStatsEntry  
SEQUENCE    
  Counter32 as mscAtmIfVptPnniRccHelloPacketsRx  
  Counter32 as mscAtmIfVptPnniRccHelloPacketsTx  
  Counter32 as mscAtmIfVptPnniRccMismatchedHelloPacketsRx  
  Counter32 as mscAtmIfVptPnniRccBadHelloPacketsRx  

MscAtmIfVptPnniRccVcdRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfVptPnniRccVcdRowStatus  
  DisplayString as mscAtmIfVptPnniRccVcdComponentName  
  StorageType as mscAtmIfVptPnniRccVcdStorageType  
  NonReplicated as mscAtmIfVptPnniRccVcdIndex  

MscAtmIfVptPnniRccVcdProvEntry  
SEQUENCE    
  INTEGER as mscAtmIfVptPnniRccVcdTrafficDescType  
  INTEGER as mscAtmIfVptPnniRccVcdAtmServiceCategory  
  Unsigned32 as mscAtmIfVptPnniRccVcdWeight  
  INTEGER as mscAtmIfVptPnniRccVcdQosClass  
  INTEGER as mscAtmIfVptPnniRccVcdTrafficShaping  
  INTEGER as mscAtmIfVptPnniRccVcdUnshapedTransmitQueueing  
  INTEGER as mscAtmIfVptPnniRccVcdUsageParameterControl  

MscAtmIfVptPnniRccVcdTdpEntry  
SEQUENCE    
  Integer32 as mscAtmIfVptPnniRccVcdTdpIndex  
  Unsigned32 as mscAtmIfVptPnniRccVcdTdpValue  

MscAtmIfVptPnniAddrRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfVptPnniAddrRowStatus  
  DisplayString as mscAtmIfVptPnniAddrComponentName  
  StorageType as mscAtmIfVptPnniAddrStorageType  
  AsciiStringIndex as mscAtmIfVptPnniAddrAddressIndex  
  INTEGER as mscAtmIfVptPnniAddrAddressTypeIndex  

MscAtmIfVptPnniAddrOperEntry  
SEQUENCE    
  INTEGER as mscAtmIfVptPnniAddrScope  
  INTEGER as mscAtmIfVptPnniAddrReachability  

MscAtmIfVptPnniAddrTermSPRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfVptPnniAddrTermSPRowStatus  
  DisplayString as mscAtmIfVptPnniAddrTermSPComponentName  
  StorageType as mscAtmIfVptPnniAddrTermSPStorageType  
  NonReplicated as mscAtmIfVptPnniAddrTermSPIndex  

MscAtmIfVptPnniAddrPnniInfoRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfVptPnniAddrPnniInfoRowStatus  
  DisplayString as mscAtmIfVptPnniAddrPnniInfoComponentName  
  StorageType as mscAtmIfVptPnniAddrPnniInfoStorageType  
  NonReplicated as mscAtmIfVptPnniAddrPnniInfoIndex  

MscAtmIfVptPnniAddrPnniInfoProvEntry  
SEQUENCE    
  INTEGER as mscAtmIfVptPnniAddrPnniInfoScope  
  INTEGER as mscAtmIfVptPnniAddrPnniInfoReachability  

MscAtmIfPnniRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfPnniRowStatus  
  DisplayString as mscAtmIfPnniComponentName  
  StorageType as mscAtmIfPnniStorageType  
  NonReplicated as mscAtmIfPnniIndex  

MscAtmIfPnniProvEntry  
SEQUENCE    
  Unsigned32 as mscAtmIfPnniSoftPvcRetryPeriod  
  Unsigned32 as mscAtmIfPnniSoftPvpAndPvcRetryPeriod  
  Unsigned32 as mscAtmIfPnniSoftPvpAndPvcHoldOffTime  

MscAtmIfPnniAdminWeightsEntry  
SEQUENCE    
  Unsigned32 as mscAtmIfPnniCbrWeight  
  Unsigned32 as mscAtmIfPnniRtVbrWeight  
  Unsigned32 as mscAtmIfPnniNrtVbrWeight  
  Unsigned32 as mscAtmIfPnniUbrWeight  

MscAtmIfPnniAcctOptEntry  
SEQUENCE    
  OCTET STRING as mscAtmIfPnniAccountCollection  
  INTEGER as mscAtmIfPnniAccountConnectionType  
  Unsigned32 as mscAtmIfPnniAccountClass  
  Unsigned32 as mscAtmIfPnniServiceExchange  

MscAtmIfPnniOperationalEntry  
SEQUENCE    
  Unsigned32 as mscAtmIfPnniPortId  

MscAtmIfPnniSigRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfPnniSigRowStatus  
  DisplayString as mscAtmIfPnniSigComponentName  
  StorageType as mscAtmIfPnniSigStorageType  
  NonReplicated as mscAtmIfPnniSigIndex  

MscAtmIfPnniSigProvEntry  
SEQUENCE    
  Unsigned32 as mscAtmIfPnniSigVci  
  INTEGER as mscAtmIfPnniSigAddressConversion  
  INTEGER as mscAtmIfPnniSigOperatingMode  

MscAtmIfPnniSigStateEntry  
SEQUENCE    
  INTEGER as mscAtmIfPnniSigAdminState  
  INTEGER as mscAtmIfPnniSigOperationalState  
  INTEGER as mscAtmIfPnniSigUsageState  

MscAtmIfPnniSigOperEntry  
SEQUENCE    
  Unsigned32 as mscAtmIfPnniSigLastTxCauseCode  
  Hex as mscAtmIfPnniSigLastTxDiagCode  
  Unsigned32 as mscAtmIfPnniSigLastRxCauseCode  
  Hex as mscAtmIfPnniSigLastRxDiagCode  

MscAtmIfPnniSigStatsEntry  
SEQUENCE    
  Counter32 as mscAtmIfPnniSigCurrentConnections  
  Gauge32 as mscAtmIfPnniSigPeakConnections  
  Counter32 as mscAtmIfPnniSigSuccessfulConnections  
  Counter32 as mscAtmIfPnniSigFailedConnections  
  Counter32 as mscAtmIfPnniSigTxPdus  
  Counter32 as mscAtmIfPnniSigRxPdus  
  Gauge32 as mscAtmIfPnniSigCurrentPmpConnections  
  Gauge32 as mscAtmIfPnniSigPeakPmpConnections  
  Counter32 as mscAtmIfPnniSigSuccessfulPmpConnections  
  Counter32 as mscAtmIfPnniSigFailedPmpConnections  
  Gauge32 as mscAtmIfPnniSigNewCurrentConnections  

MscAtmIfPnniSigVcdRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfPnniSigVcdRowStatus  
  DisplayString as mscAtmIfPnniSigVcdComponentName  
  StorageType as mscAtmIfPnniSigVcdStorageType  
  NonReplicated as mscAtmIfPnniSigVcdIndex  

MscAtmIfPnniSigVcdProvEntry  
SEQUENCE    
  INTEGER as mscAtmIfPnniSigVcdTrafficDescType  
  INTEGER as mscAtmIfPnniSigVcdAtmServiceCategory  
  Unsigned32 as mscAtmIfPnniSigVcdWeight  
  INTEGER as mscAtmIfPnniSigVcdQosClass  
  INTEGER as mscAtmIfPnniSigVcdTrafficShaping  
  INTEGER as mscAtmIfPnniSigVcdUnshapedTransmitQueueing  
  INTEGER as mscAtmIfPnniSigVcdUsageParameterControl  

MscAtmIfPnniSigVcdTdpEntry  
SEQUENCE    
  Integer32 as mscAtmIfPnniSigVcdTdpIndex  
  Unsigned32 as mscAtmIfPnniSigVcdTdpValue  

MscAtmIfPnniRccRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfPnniRccRowStatus  
  DisplayString as mscAtmIfPnniRccComponentName  
  StorageType as mscAtmIfPnniRccStorageType  
  NonReplicated as mscAtmIfPnniRccIndex  

MscAtmIfPnniRccProvEntry  
SEQUENCE    
  Unsigned32 as mscAtmIfPnniRccVci  

MscAtmIfPnniRccHlParmsEntry  
SEQUENCE    
  FixedPoint1 as mscAtmIfPnniRccHelloHoldDown  
  Unsigned32 as mscAtmIfPnniRccHelloInterval  
  Unsigned32 as mscAtmIfPnniRccHelloInactivityFactor  

MscAtmIfPnniRccStateEntry  
SEQUENCE    
  INTEGER as mscAtmIfPnniRccAdminState  
  INTEGER as mscAtmIfPnniRccOperationalState  
  INTEGER as mscAtmIfPnniRccUsageState  

MscAtmIfPnniRccOperEntry  
SEQUENCE    
  INTEGER as mscAtmIfPnniRccType  
  INTEGER as mscAtmIfPnniRccNegotiatedVersion  
  INTEGER as mscAtmIfPnniRccHelloState  
  HexString as mscAtmIfPnniRccRemoteNodeId  
  Unsigned32 as mscAtmIfPnniRccRemotePortId  

MscAtmIfPnniRccStatsEntry  
SEQUENCE    
  Counter32 as mscAtmIfPnniRccHelloPacketsRx  
  Counter32 as mscAtmIfPnniRccHelloPacketsTx  
  Counter32 as mscAtmIfPnniRccMismatchedHelloPacketsRx  
  Counter32 as mscAtmIfPnniRccBadHelloPacketsRx  

MscAtmIfPnniRccVcdRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfPnniRccVcdRowStatus  
  DisplayString as mscAtmIfPnniRccVcdComponentName  
  StorageType as mscAtmIfPnniRccVcdStorageType  
  NonReplicated as mscAtmIfPnniRccVcdIndex  

MscAtmIfPnniRccVcdProvEntry  
SEQUENCE    
  INTEGER as mscAtmIfPnniRccVcdTrafficDescType  
  INTEGER as mscAtmIfPnniRccVcdAtmServiceCategory  
  Unsigned32 as mscAtmIfPnniRccVcdWeight  
  INTEGER as mscAtmIfPnniRccVcdQosClass  
  INTEGER as mscAtmIfPnniRccVcdTrafficShaping  
  INTEGER as mscAtmIfPnniRccVcdUnshapedTransmitQueueing  
  INTEGER as mscAtmIfPnniRccVcdUsageParameterControl  

MscAtmIfPnniRccVcdTdpEntry  
SEQUENCE    
  Integer32 as mscAtmIfPnniRccVcdTdpIndex  
  Unsigned32 as mscAtmIfPnniRccVcdTdpValue  

MscAtmIfPnniAddrRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfPnniAddrRowStatus  
  DisplayString as mscAtmIfPnniAddrComponentName  
  StorageType as mscAtmIfPnniAddrStorageType  
  AsciiStringIndex as mscAtmIfPnniAddrAddressIndex  
  INTEGER as mscAtmIfPnniAddrAddressTypeIndex  

MscAtmIfPnniAddrOperEntry  
SEQUENCE    
  INTEGER as mscAtmIfPnniAddrScope  
  INTEGER as mscAtmIfPnniAddrReachability  

MscAtmIfPnniAddrTermSPRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfPnniAddrTermSPRowStatus  
  DisplayString as mscAtmIfPnniAddrTermSPComponentName  
  StorageType as mscAtmIfPnniAddrTermSPStorageType  
  NonReplicated as mscAtmIfPnniAddrTermSPIndex  

MscAtmIfPnniAddrPnniInfoRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfPnniAddrPnniInfoRowStatus  
  DisplayString as mscAtmIfPnniAddrPnniInfoComponentName  
  StorageType as mscAtmIfPnniAddrPnniInfoStorageType  
  NonReplicated as mscAtmIfPnniAddrPnniInfoIndex  

MscAtmIfPnniAddrPnniInfoProvEntry  
SEQUENCE    
  INTEGER as mscAtmIfPnniAddrPnniInfoScope  
  INTEGER as mscAtmIfPnniAddrPnniInfoReachability