Nortel-MsCarrier-MscPassport-AtmUniMIB

File: Nortel-MsCarrier-MscPassport-AtmUniMIB.mib (192701 bytes)

Imported modules

RFC-1212 Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB
Nortel-MsCarrier-MscPassport-TextualConventionsMIB Nortel-MsCarrier-MscPassport-AtmCoreMIB

Imported symbols

OBJECT-TYPE mscPassportMIBs Counter32
DisplayString StorageType RowStatus
Gauge32 Integer32 Unsigned32
AsciiString Hex NonReplicated
HexString AsciiStringIndex mscAtmIf
mscAtmIfVptIndex mscAtmIfVpt mscAtmIfIndex

Defined Objects

mscAtmIfUni 1.3.6.1.4.1.562.36.2.1.114.6
OBJECT IDENTIFIER    

mscAtmIfUniRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.6.1
This entry controls the addition and deletion of mscAtmIfUni components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfUniRowStatusEntry

mscAtmIfUniRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.6.1.1
A single entry in the table represents a single mscAtmIfUni component.
OBJECT-TYPE    
  MscAtmIfUniRowStatusEntry  

mscAtmIfUniRowStatus 1.3.6.1.4.1.562.36.2.1.114.6.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfUni components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfUniComponentName 1.3.6.1.4.1.562.36.2.1.114.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfUniStorageType 1.3.6.1.4.1.562.36.2.1.114.6.1.1.4
This variable represents the storage type value for the mscAtmIfUni tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfUniIndex 1.3.6.1.4.1.562.36.2.1.114.6.1.1.10
This variable represents the index for the mscAtmIfUni tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfUniIlmi 1.3.6.1.4.1.562.36.2.1.114.6.2
OBJECT IDENTIFIER    

mscAtmIfUniIlmiRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.6.2.1
This entry controls the addition and deletion of mscAtmIfUniIlmi components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfUniIlmiRowStatusEntry

mscAtmIfUniIlmiRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.6.2.1.1
A single entry in the table represents a single mscAtmIfUniIlmi component.
OBJECT-TYPE    
  MscAtmIfUniIlmiRowStatusEntry  

mscAtmIfUniIlmiRowStatus 1.3.6.1.4.1.562.36.2.1.114.6.2.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfUniIlmi components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfUniIlmiComponentName 1.3.6.1.4.1.562.36.2.1.114.6.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfUniIlmiStorageType 1.3.6.1.4.1.562.36.2.1.114.6.2.1.1.4
This variable represents the storage type value for the mscAtmIfUniIlmi tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfUniIlmiIndex 1.3.6.1.4.1.562.36.2.1.114.6.2.1.1.10
This variable represents the index for the mscAtmIfUniIlmi tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfUniIlmiStateTable 1.3.6.1.4.1.562.36.2.1.114.6.2.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfUniIlmiStateEntry

mscAtmIfUniIlmiStateEntry 1.3.6.1.4.1.562.36.2.1.114.6.2.10.1
An entry in the mscAtmIfUniIlmiStateTable.
OBJECT-TYPE    
  MscAtmIfUniIlmiStateEntry  

mscAtmIfUniIlmiAdminState 1.3.6.1.4.1.562.36.2.1.114.6.2.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscAtmIfUniIlmiOperationalState 1.3.6.1.4.1.562.36.2.1.114.6.2.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscAtmIfUniIlmiUsageState 1.3.6.1.4.1.562.36.2.1.114.6.2.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscAtmIfUniIlmiProvTable 1.3.6.1.4.1.562.36.2.1.114.6.2.11
This attribute group contains the provisionable attributes for the Ilmi component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfUniIlmiProvEntry

mscAtmIfUniIlmiProvEntry 1.3.6.1.4.1.562.36.2.1.114.6.2.11.1
An entry in the mscAtmIfUniIlmiProvTable.
OBJECT-TYPE    
  MscAtmIfUniIlmiProvEntry  

mscAtmIfUniIlmiVci 1.3.6.1.4.1.562.36.2.1.114.6.2.11.1.1
This attribute identifies the ILMI channel number.
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAtmIfUniIlmiOperatingMode 1.3.6.1.4.1.562.36.2.1.114.6.2.11.1.2
This attribute is used to enable/disable the ILMI protocol. addressRegEnabled indicates that the ILMI address registration protocol is enabled. addressRegDisabled indicates that the ILMI address registration protocol is disabled. ilmiDisabled indicates that all of ILMI is disabled.
OBJECT-TYPE    
  INTEGER addressRegEnabled(0), addressRegDisabled(1), ilmiDisabled(2)  

mscAtmIfUniIlmiStatsTable 1.3.6.1.4.1.562.36.2.1.114.6.2.12
This attribute group contains the statistics for the AtmIlmi component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfUniIlmiStatsEntry

mscAtmIfUniIlmiStatsEntry 1.3.6.1.4.1.562.36.2.1.114.6.2.12.1
An entry in the mscAtmIfUniIlmiStatsTable.
OBJECT-TYPE    
  MscAtmIfUniIlmiStatsEntry  

mscAtmIfUniIlmiTxPdus 1.3.6.1.4.1.562.36.2.1.114.6.2.12.1.1
This attribute counts the number of transmitted ILMI PDUs. The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

mscAtmIfUniIlmiRxPdus 1.3.6.1.4.1.562.36.2.1.114.6.2.12.1.2
This attribute counts the total number of received ILMI PDUs.The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

mscAtmIfUniIlmiRxBadPdusDiscarded 1.3.6.1.4.1.562.36.2.1.114.6.2.12.1.3
This attribute counts the number of received ILMI PDUs that were discarded due to invalid SNMP format. The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

mscAtmIfUniIlmiPrefixToRegisterTable 1.3.6.1.4.1.562.36.2.1.114.6.2.287
This attribute is a list of zero or more addresses. If the side attribute in the Uni component is set to user, then this attribute must be empty; if the side attribute is set to network, then this attribute is a list of prefixes.This attribute represents a list of prefix addresses (26 digits) that are sent to the user side. If no prefixes are entered, then the nodeAddress attribute in the AtmCallRouter component is used for address registration.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfUniIlmiPrefixToRegisterEntry

mscAtmIfUniIlmiPrefixToRegisterEntry 1.3.6.1.4.1.562.36.2.1.114.6.2.287.1
An entry in the mscAtmIfUniIlmiPrefixToRegisterTable.
OBJECT-TYPE    
  MscAtmIfUniIlmiPrefixToRegisterEntry  

mscAtmIfUniIlmiPrefixToRegisterValue 1.3.6.1.4.1.562.36.2.1.114.6.2.287.1.1
This variable represents both the value and the index for the mscAtmIfUniIlmiPrefixToRegisterTable.
OBJECT-TYPE    
  AsciiString SIZE(26)  

mscAtmIfUniIlmiPrefixToRegisterRowStatus 1.3.6.1.4.1.562.36.2.1.114.6.2.287.1.2
This variable is used to control the addition and deletion of individual values of the mscAtmIfUniIlmiPrefixToRegisterTable.
OBJECT-TYPE    
  RowStatus  

mscAtmIfUniIlmiEsiToRegisterTable 1.3.6.1.4.1.562.36.2.1.114.6.2.288
This attribute is a list of zero or more addresses. If the side attribute in the Uni component is set to network, then this attribute must be an empty list; if the side attribute is set to user, then this attribute is a list of end system indicators (ESI) addresses (12 hex digits) that are used to compose addresses to register with the network side.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfUniIlmiEsiToRegisterEntry

mscAtmIfUniIlmiEsiToRegisterEntry 1.3.6.1.4.1.562.36.2.1.114.6.2.288.1
An entry in the mscAtmIfUniIlmiEsiToRegisterTable.
OBJECT-TYPE    
  MscAtmIfUniIlmiEsiToRegisterEntry  

mscAtmIfUniIlmiEsiToRegisterValue 1.3.6.1.4.1.562.36.2.1.114.6.2.288.1.1
This variable represents both the value and the index for the mscAtmIfUniIlmiEsiToRegisterTable.
OBJECT-TYPE    
  AsciiString SIZE(12)  

mscAtmIfUniIlmiEsiToRegisterRowStatus 1.3.6.1.4.1.562.36.2.1.114.6.2.288.1.2
This variable is used to control the addition and deletion of individual values of the mscAtmIfUniIlmiEsiToRegisterTable.
OBJECT-TYPE    
  RowStatus  

mscAtmIfUniSig 1.3.6.1.4.1.562.36.2.1.114.6.3
OBJECT IDENTIFIER    

mscAtmIfUniSigRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.6.3.1
This entry controls the addition and deletion of mscAtmIfUniSig components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfUniSigRowStatusEntry

mscAtmIfUniSigRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.6.3.1.1
A single entry in the table represents a single mscAtmIfUniSig component.
OBJECT-TYPE    
  MscAtmIfUniSigRowStatusEntry  

mscAtmIfUniSigRowStatus 1.3.6.1.4.1.562.36.2.1.114.6.3.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfUniSig components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfUniSigComponentName 1.3.6.1.4.1.562.36.2.1.114.6.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfUniSigStorageType 1.3.6.1.4.1.562.36.2.1.114.6.3.1.1.4
This variable represents the storage type value for the mscAtmIfUniSig tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfUniSigIndex 1.3.6.1.4.1.562.36.2.1.114.6.3.1.1.10
This variable represents the index for the mscAtmIfUniSig tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfUniSigVcd 1.3.6.1.4.1.562.36.2.1.114.6.3.2
OBJECT IDENTIFIER    

mscAtmIfUniSigVcdRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.6.3.2.1
This entry controls the addition and deletion of mscAtmIfUniSigVcd components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfUniSigVcdRowStatusEntry

mscAtmIfUniSigVcdRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.6.3.2.1.1
A single entry in the table represents a single mscAtmIfUniSigVcd component.
OBJECT-TYPE    
  MscAtmIfUniSigVcdRowStatusEntry  

mscAtmIfUniSigVcdRowStatus 1.3.6.1.4.1.562.36.2.1.114.6.3.2.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfUniSigVcd components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfUniSigVcdComponentName 1.3.6.1.4.1.562.36.2.1.114.6.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfUniSigVcdStorageType 1.3.6.1.4.1.562.36.2.1.114.6.3.2.1.1.4
This variable represents the storage type value for the mscAtmIfUniSigVcd tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfUniSigVcdIndex 1.3.6.1.4.1.562.36.2.1.114.6.3.2.1.1.10
This variable represents the index for the mscAtmIfUniSigVcd tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfUniSigVcdProvTable 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10
This group contains the provisionable traffic attributes for a control channel.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfUniSigVcdProvEntry

mscAtmIfUniSigVcdProvEntry 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1
An entry in the mscAtmIfUniSigVcdProvTable.
OBJECT-TYPE    
  MscAtmIfUniSigVcdProvEntry  

mscAtmIfUniSigVcdTrafficDescType 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.1
This attribute specifies the type of traffic management which is applied to both the transmit and receive direction of this connection as defined in the ATM Forum. The trafficDescType determines the number and meaning of the parameters in the trafficDescParm attribute.
OBJECT-TYPE    
  INTEGER n3(3), n6(6), n7(7), n8(8)  

mscAtmIfUniSigVcdAtmServiceCategory 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.3
This attribute specifies the ATM service category for both directions of the connection. The constantBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. The consistent availability of a fixed quantity of bandwidth is considered appropriate for CBR service. Cells which are delayed beyond the value specified by CellTransfer Delay are assumed to be of significantly reduce value to the application. The rtVariableBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. Sources are expected to transmit at a rate which varies with time. Equivalently, the source can be described as 'bursty'. Cells which are delayed beyond the value specified by CTD are assumed to be of significantly reduced value to the application. Real time VBR service may support statistical multiplexing of real time sources. The nrtVariableBitRate service category is intended for non-real time applications which have bursty traffic characteristics and which can be characterized in terms of a PCR, SCR, and MBS. For those cells which are transferred within the traffic contract, the application expects a low cell loss ratio. For all connections, it expects a bound on the mean cell transfer delay. Non-real time VBR service may support statistical multiplexing of connections. The unspecifiedBitRate service is intended for non-real time applications; that is, those not requiring tightly constrained delay and delay variation. UBR sources are expected to be bursty. UBR service supports a high degree of statistical multiplexing among sources. UBR service does not specify traffic related service guarantees. No numerical commitments are made with respect to the cell loss ratio experienced by a UBR connection, or as to the cell transfer delay experienced by cells on the connection.
OBJECT-TYPE    
  INTEGER unspecifiedBitRate(0), constantBitRate(1), rtVariableBitRate(2), nrtVariableBitRate(3)  

mscAtmIfUniSigVcdWeight 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.4
This attribute specifies an override for the weight of this unshaped connection. This attribute is ignored for shaped connections, for ABR connections, for connections on a CQC-based ATM FP and basic VPTs. When the value is set to sameAsCa, the weight is determined by the weight policy attribute under the CA service category component for all but standard VPT VCCs. For standard VPT VCCs, the weight is determined by the VCC's service category, when the value is set to sameAsCa. When this attribute is set to a value from 1 to 4095, that value is used for the weight policy of this connection relative to other connections. For all but standard VPT VCCs, weight policy determines the proportion of transit cell opportunities which are allocated to this connection, compared to other connections in the same service category. For standard VPT VCCs, weight policy determines the proportion of transmit cell opportunities which are allocated to this connection, compared to other connections associated with the VPT. When the value is set to upToQueueLimit, the weight policy is limited only by the txQueueLimit. VALUES ( 0 = upToQueueLimit 65535 = sameAsCa )
OBJECT-TYPE    
  Unsigned32 0 | 1..4095 | 65535  

mscAtmIfUniSigVcdQosClass 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.21
This attribute specifies the quality of service for both the forward and backward direction for this connection. Class 1 supports a QOS that meets Service Class A performance requirements (Circuit emulation, constant bit rate video). Class 2 supports a QOS that meets Service Class B performance requirements (Variable bit rate audio and video). Class 3 supports a QOS that meets Service Class C performance requirements (Connection-Oriented Data Transfer). Class 4 supports a QOS that meets Service Class D performance requirements (Connectionless Data Transfer). Class 0 is the unspecified bit rate QOS class; no objective is specified for the performance parameters.
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4)  

mscAtmIfUniSigVcdTrafficShaping 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.50
This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled.
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

mscAtmIfUniSigVcdUnshapedTransmitQueueing 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.60
This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this connection if it is unshaped. Refer to the unshapedTransmitQueueing attribute under the AtmIf CA service category subcomponent for more details on the meaning of this attribute. When this attribute is set to sameAsCa, the transmit queueing method for the connection is based on the unshapedTransmitQueueing attribute of the connection's service category component under the ConnectionAdministrator. When this attribute is set to common, transmit traffic on this unshaped connection is destined for the common queue. The value sameAsInterface is for migration from previous software releases, but should no longer be used
OBJECT-TYPE    
  INTEGER common(1), sameAsCa(3)  

mscAtmIfUniSigVcdUsageParameterControl 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.70
This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface. When sameAsCa is selected, UPC for the connection is based on the usageParameterControl attribute of the connection's service category component under the ConnectionAdministrator. If the service category has UPC enabled, then UPC is enabled for the connection. Note that enabling UPC may have no effect under certain cases. These cases are listed in the description of the usageParameterControl operational attribute, which is under the Vcc Tm or Vpc Tm component. When disabled is selected, UPC for this connection is disabled. The value sameAsInterface is for migration from previous software releases, but should no longer be used
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

mscAtmIfUniSigVcdTdpTable 1.3.6.1.4.1.562.36.2.1.114.6.3.2.387
This attribute is a vector of five traffic parameters whose meanings are defined by the trafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR) and requested shaping rate are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. CDVT is expressed in microseconds. The values of PCR, SCR, MBS and CDVT are used for connection admission control (CAC). The value of CDVT is only used for connections where the atmServiceCategory is constantBitRate. For all other values of atmServiceCategory, CDVT is ignored. The values of PCR, SCR and requested shaping rate are used to determine the actual shaping rate where traffic shaping is enabled. When trafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3 must be zero. When trafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. Whenever it is valid for PCR to be specified, parameter 5 may also be used to specify a requested shaping rate. A non-zero value in parameter 5 overrides the value in parameter 1 and is used as the peak cell rate in calculations of CAC and shaping rate. For trafficDescType 3 the traffic is shaped at the next rate less than the PCR. For trafficDescType 6, 7, and 8, the traffic is shaped at the highest available rate which is between PCR and SCR. However, if there is no available shaping rate between PCR and SCR, traffic is shaped at the next rate above the PCR.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfUniSigVcdTdpEntry

mscAtmIfUniSigVcdTdpEntry 1.3.6.1.4.1.562.36.2.1.114.6.3.2.387.1
An entry in the mscAtmIfUniSigVcdTdpTable.
OBJECT-TYPE    
  MscAtmIfUniSigVcdTdpEntry  

mscAtmIfUniSigVcdTdpIndex 1.3.6.1.4.1.562.36.2.1.114.6.3.2.387.1.1
This variable represents the mscAtmIfUniSigVcdTdpTable specific index for the mscAtmIfUniSigVcdTdpTable.
OBJECT-TYPE    
  Integer32 1..5  

mscAtmIfUniSigVcdTdpValue 1.3.6.1.4.1.562.36.2.1.114.6.3.2.387.1.2
This variable represents an individual value for the mscAtmIfUniSigVcdTdpTable.
OBJECT-TYPE    
  Unsigned32 0..2147483647  

mscAtmIfUniSigProvTable 1.3.6.1.4.1.562.36.2.1.114.6.3.10
This attribute group contains the provisionable attributes for the Signalling component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfUniSigProvEntry

mscAtmIfUniSigProvEntry 1.3.6.1.4.1.562.36.2.1.114.6.3.10.1
An entry in the mscAtmIfUniSigProvTable.
OBJECT-TYPE    
  MscAtmIfUniSigProvEntry  

mscAtmIfUniSigVci 1.3.6.1.4.1.562.36.2.1.114.6.3.10.1.1
This attribute specifies the signalling channel number.
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAtmIfUniSigAddressConversion 1.3.6.1.4.1.562.36.2.1.114.6.3.10.1.2
This attribute specifies the address conversion on the outgoing signalling PDUs. The options are none, nativeE164, or nsap. The none option is the default and if this option is chosen then nothing is done to the address information element (IE) in the outgoing signalling message. If nativeE164 option is chosen, then only NSAP encapsulated E.164 addresses with zeros in the ESI are converted to native E.164 format in the outgoing signalling message. If the NSAP address is not encapsulated E.164 or the ESI field is not zeros and the nativeE164 option is chosen, then the call is cleared. If the nsap option is chosen, then native E.164 addresses are converted to NSAP E.164 with zeros in the ESI field; otherwise the address is in NSAP format and is not changed.
OBJECT-TYPE    
  INTEGER none(0), nativeE164(1), nsap(2)  

mscAtmIfUniSigOperatingMode 1.3.6.1.4.1.562.36.2.1.114.6.3.10.1.3
This attribute specifies the operating mode of the signaling channel. provisionedOnly indicates that only SPVCs and SPVPs are supported on the interface and SVCs are not supported. This value is permitted only on UNI interfaces. normal indicates that SVCs, SPVCs, and SPVPs are supported on the interface.
OBJECT-TYPE    
  INTEGER normal(0), provisionedOnly(1)  

mscAtmIfUniSigStateTable 1.3.6.1.4.1.562.36.2.1.114.6.3.11
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfUniSigStateEntry

mscAtmIfUniSigStateEntry 1.3.6.1.4.1.562.36.2.1.114.6.3.11.1
An entry in the mscAtmIfUniSigStateTable.
OBJECT-TYPE    
  MscAtmIfUniSigStateEntry  

mscAtmIfUniSigAdminState 1.3.6.1.4.1.562.36.2.1.114.6.3.11.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscAtmIfUniSigOperationalState 1.3.6.1.4.1.562.36.2.1.114.6.3.11.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscAtmIfUniSigUsageState 1.3.6.1.4.1.562.36.2.1.114.6.3.11.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscAtmIfUniSigOperTable 1.3.6.1.4.1.562.36.2.1.114.6.3.12
This attribute contains the operational attributes for the AtmSignalling component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfUniSigOperEntry

mscAtmIfUniSigOperEntry 1.3.6.1.4.1.562.36.2.1.114.6.3.12.1
An entry in the mscAtmIfUniSigOperTable.
OBJECT-TYPE    
  MscAtmIfUniSigOperEntry  

mscAtmIfUniSigLastTxCauseCode 1.3.6.1.4.1.562.36.2.1.114.6.3.12.1.1
This attribute indicates the cause code in the last transmitted signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages.
OBJECT-TYPE    
  Unsigned32 0..255  

mscAtmIfUniSigLastTxDiagCode 1.3.6.1.4.1.562.36.2.1.114.6.3.12.1.2
This attribute contains the diagnostic code in the last transmitted signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0.
OBJECT-TYPE    
  Hex 0..255  

mscAtmIfUniSigLastRxCauseCode 1.3.6.1.4.1.562.36.2.1.114.6.3.12.1.3
This attribute contains the cause code in the last received signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages.
OBJECT-TYPE    
  Unsigned32 0..255  

mscAtmIfUniSigLastRxDiagCode 1.3.6.1.4.1.562.36.2.1.114.6.3.12.1.4
This attribute contains the diagnostic code in the last received signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0.
OBJECT-TYPE    
  Hex 0..255  

mscAtmIfUniSigStatsTable 1.3.6.1.4.1.562.36.2.1.114.6.3.13
This attribute group contains the statistics associated with the AtmSignalling component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfUniSigStatsEntry

mscAtmIfUniSigStatsEntry 1.3.6.1.4.1.562.36.2.1.114.6.3.13.1
An entry in the mscAtmIfUniSigStatsTable.
OBJECT-TYPE    
  MscAtmIfUniSigStatsEntry  

mscAtmIfUniSigCurrentConnections 1.3.6.1.4.1.562.36.2.1.114.6.3.13.1.1
This attribute indicates the total number of currently active connections.
OBJECT-TYPE    
  Counter32  

mscAtmIfUniSigPeakConnections 1.3.6.1.4.1.562.36.2.1.114.6.3.13.1.2
This attribute indicates the high water mark of active point-to- point and point-to-multipoint connections.
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAtmIfUniSigSuccessfulConnections 1.3.6.1.4.1.562.36.2.1.114.6.3.13.1.3
This attribute counts the total number of switched point-to- point and point-to-multipoint connections that were successfully established. The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

mscAtmIfUniSigFailedConnections 1.3.6.1.4.1.562.36.2.1.114.6.3.13.1.4
This attribute counts the total number of switched connections that were not successfully established.The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

mscAtmIfUniSigTxPdus 1.3.6.1.4.1.562.36.2.1.114.6.3.13.1.5
This attribute counts the number of transmitted signalling PDUs.The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

mscAtmIfUniSigRxPdus 1.3.6.1.4.1.562.36.2.1.114.6.3.13.1.6
This attribute counts the number of received signalling PDUs.The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

mscAtmIfUniSigCurrentPmpConnections 1.3.6.1.4.1.562.36.2.1.114.6.3.13.1.7
This attribute indicates the number of currently active point-to- multipoint connections.
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAtmIfUniSigPeakPmpConnections 1.3.6.1.4.1.562.36.2.1.114.6.3.13.1.8
This attribute indicates the high water mark of active point-to- multipoint connections.
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAtmIfUniSigSuccessfulPmpConnections 1.3.6.1.4.1.562.36.2.1.114.6.3.13.1.9
This attribute counts the total number of switched point-to- multipoint connections that were successfully established. The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

mscAtmIfUniSigFailedPmpConnections 1.3.6.1.4.1.562.36.2.1.114.6.3.13.1.10
This attribute counts the number of switched point-to- multipoint connections that were not successfully established.The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

mscAtmIfUniSigNewCurrentConnections 1.3.6.1.4.1.562.36.2.1.114.6.3.13.1.11
This attribute indicates the total number of currently active point-to- point and point-to-multipoint connections.
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAtmIfUniAddr 1.3.6.1.4.1.562.36.2.1.114.6.4
OBJECT IDENTIFIER    

mscAtmIfUniAddrRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.6.4.1
This entry controls the addition and deletion of mscAtmIfUniAddr components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfUniAddrRowStatusEntry

mscAtmIfUniAddrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.6.4.1.1
A single entry in the table represents a single mscAtmIfUniAddr component.
OBJECT-TYPE    
  MscAtmIfUniAddrRowStatusEntry  

mscAtmIfUniAddrRowStatus 1.3.6.1.4.1.562.36.2.1.114.6.4.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfUniAddr components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfUniAddrComponentName 1.3.6.1.4.1.562.36.2.1.114.6.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfUniAddrStorageType 1.3.6.1.4.1.562.36.2.1.114.6.4.1.1.4
This variable represents the storage type value for the mscAtmIfUniAddr tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfUniAddrAddressIndex 1.3.6.1.4.1.562.36.2.1.114.6.4.1.1.10
This variable represents an index for the mscAtmIfUniAddr tables.
OBJECT-TYPE    
  AsciiStringIndex SIZE(1..40)  

mscAtmIfUniAddrAddressTypeIndex 1.3.6.1.4.1.562.36.2.1.114.6.4.1.1.11
This variable represents an index for the mscAtmIfUniAddr tables.
OBJECT-TYPE    
  INTEGER primary(0), alternate(1), registered(2), default(3)  

mscAtmIfUniAddrTermSP 1.3.6.1.4.1.562.36.2.1.114.6.4.2
OBJECT IDENTIFIER    

mscAtmIfUniAddrTermSPRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.6.4.2.1
This entry controls the addition and deletion of mscAtmIfUniAddrTermSP components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfUniAddrTermSPRowStatusEntry

mscAtmIfUniAddrTermSPRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.6.4.2.1.1
A single entry in the table represents a single mscAtmIfUniAddrTermSP component.
OBJECT-TYPE    
  MscAtmIfUniAddrTermSPRowStatusEntry  

mscAtmIfUniAddrTermSPRowStatus 1.3.6.1.4.1.562.36.2.1.114.6.4.2.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfUniAddrTermSP components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfUniAddrTermSPComponentName 1.3.6.1.4.1.562.36.2.1.114.6.4.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfUniAddrTermSPStorageType 1.3.6.1.4.1.562.36.2.1.114.6.4.2.1.1.4
This variable represents the storage type value for the mscAtmIfUniAddrTermSP tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfUniAddrTermSPIndex 1.3.6.1.4.1.562.36.2.1.114.6.4.2.1.1.10
This variable represents the index for the mscAtmIfUniAddrTermSP tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfUniAddrPnniInfo 1.3.6.1.4.1.562.36.2.1.114.6.4.3
OBJECT IDENTIFIER    

mscAtmIfUniAddrPnniInfoRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.6.4.3.1
This entry controls the addition and deletion of mscAtmIfUniAddrPnniInfo components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfUniAddrPnniInfoRowStatusEntry

mscAtmIfUniAddrPnniInfoRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.6.4.3.1.1
A single entry in the table represents a single mscAtmIfUniAddrPnniInfo component.
OBJECT-TYPE    
  MscAtmIfUniAddrPnniInfoRowStatusEntry  

mscAtmIfUniAddrPnniInfoRowStatus 1.3.6.1.4.1.562.36.2.1.114.6.4.3.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfUniAddrPnniInfo components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfUniAddrPnniInfoComponentName 1.3.6.1.4.1.562.36.2.1.114.6.4.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfUniAddrPnniInfoStorageType 1.3.6.1.4.1.562.36.2.1.114.6.4.3.1.1.4
This variable represents the storage type value for the mscAtmIfUniAddrPnniInfo tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfUniAddrPnniInfoIndex 1.3.6.1.4.1.562.36.2.1.114.6.4.3.1.1.10
This variable represents the index for the mscAtmIfUniAddrPnniInfo tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfUniAddrPnniInfoProvTable 1.3.6.1.4.1.562.36.2.1.114.6.4.3.10
This attribute group contains the provisioned attributes relating to PNNI for a PnniInfo component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfUniAddrPnniInfoProvEntry

mscAtmIfUniAddrPnniInfoProvEntry 1.3.6.1.4.1.562.36.2.1.114.6.4.3.10.1
An entry in the mscAtmIfUniAddrPnniInfoProvTable.
OBJECT-TYPE    
  MscAtmIfUniAddrPnniInfoProvEntry  

mscAtmIfUniAddrPnniInfoScope 1.3.6.1.4.1.562.36.2.1.114.6.4.3.10.1.1
This attribute specifies the scope of the ATM address, which is the highest level up to which this address will be advertised in the PNNI hierarchy. The scope must be set to a value numerically less than or equal to the level of the lowest level peer group containing this node. Setting the scope to 0 will cause the address to be advertised globally within this PNNI routing domain.
OBJECT-TYPE    
  INTEGER -1..104  

mscAtmIfUniAddrPnniInfoReachability 1.3.6.1.4.1.562.36.2.1.114.6.4.3.10.1.2
This attribute indicates whether the address is internal or exterior. An internal reachable address is an address of a destination that is directly attached to the logical node advertising the address. An exterior reachable address is an address that can be reached through a PNNI routing domain, but which is not located in that PNNI routing domain.
OBJECT-TYPE    
  INTEGER internal(0), exterior(1)  

mscAtmIfUniAddrOperTable 1.3.6.1.4.1.562.36.2.1.114.6.4.10
This attribute group contains the operational attributes for the Address component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfUniAddrOperEntry

mscAtmIfUniAddrOperEntry 1.3.6.1.4.1.562.36.2.1.114.6.4.10.1
An entry in the mscAtmIfUniAddrOperTable.
OBJECT-TYPE    
  MscAtmIfUniAddrOperEntry  

mscAtmIfUniAddrScope 1.3.6.1.4.1.562.36.2.1.114.6.4.10.1.1
This attribute indicates the scope of the ATM address, which is the highest level to which this address will be advertised in the PNNI hierarchy. If no PnniInfo subcomponent has been provisioned, then the scope will default to the level of this node in the PNNI hierarchy. If this node does not participate in a PNNI hierarchy, then this attribute will have the value of -1.
OBJECT-TYPE    
  INTEGER -1..104  

mscAtmIfUniAddrReachability 1.3.6.1.4.1.562.36.2.1.114.6.4.10.1.2
This attribute indicates whether the address is internal or exterior. An internal reachable address is an address of a destination that is directly attached to the logical node advertising the address. An exterior reachable address is an address that can be reached through a PNNI routing domain, but which is not located in that PNNI routing domain.
OBJECT-TYPE    
  INTEGER internal(0), exterior(1)  

mscAtmIfUniCallingAScr 1.3.6.1.4.1.562.36.2.1.114.6.5
OBJECT IDENTIFIER    

mscAtmIfUniCallingAScrRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.6.5.1
This entry controls the addition and deletion of mscAtmIfUniCallingAScr components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfUniCallingAScrRowStatusEntry

mscAtmIfUniCallingAScrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.6.5.1.1
A single entry in the table represents a single mscAtmIfUniCallingAScr component.
OBJECT-TYPE    
  MscAtmIfUniCallingAScrRowStatusEntry  

mscAtmIfUniCallingAScrRowStatus 1.3.6.1.4.1.562.36.2.1.114.6.5.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfUniCallingAScr components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfUniCallingAScrComponentName 1.3.6.1.4.1.562.36.2.1.114.6.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfUniCallingAScrStorageType 1.3.6.1.4.1.562.36.2.1.114.6.5.1.1.4
This variable represents the storage type value for the mscAtmIfUniCallingAScr tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfUniCallingAScrIndex 1.3.6.1.4.1.562.36.2.1.114.6.5.1.1.10
This variable represents the index for the mscAtmIfUniCallingAScr tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfUniCallingAScrAddr 1.3.6.1.4.1.562.36.2.1.114.6.5.2
OBJECT IDENTIFIER    

mscAtmIfUniCallingAScrAddrRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.6.5.2.1
This entry controls the addition and deletion of mscAtmIfUniCallingAScrAddr components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfUniCallingAScrAddrRowStatusEntry

mscAtmIfUniCallingAScrAddrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.6.5.2.1.1
A single entry in the table represents a single mscAtmIfUniCallingAScrAddr component.
OBJECT-TYPE    
  MscAtmIfUniCallingAScrAddrRowStatusEntry  

mscAtmIfUniCallingAScrAddrRowStatus 1.3.6.1.4.1.562.36.2.1.114.6.5.2.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfUniCallingAScrAddr components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfUniCallingAScrAddrComponentName 1.3.6.1.4.1.562.36.2.1.114.6.5.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfUniCallingAScrAddrStorageType 1.3.6.1.4.1.562.36.2.1.114.6.5.2.1.1.4
This variable represents the storage type value for the mscAtmIfUniCallingAScrAddr tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfUniCallingAScrAddrAddressIndex 1.3.6.1.4.1.562.36.2.1.114.6.5.2.1.1.10
This variable represents an index for the mscAtmIfUniCallingAScrAddr tables.
OBJECT-TYPE    
  AsciiStringIndex SIZE(1..40)  

mscAtmIfUniCallingAScrAddrAddressActionIndex 1.3.6.1.4.1.562.36.2.1.114.6.5.2.1.1.11
This variable represents an index for the mscAtmIfUniCallingAScrAddr tables.
OBJECT-TYPE    
  INTEGER accept(0), reject(1)  

mscAtmIfUniCallingAScrProvTable 1.3.6.1.4.1.562.36.2.1.114.6.5.10
This attribute group contains the provisionable attributes for the CallingAScr component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfUniCallingAScrProvEntry

mscAtmIfUniCallingAScrProvEntry 1.3.6.1.4.1.562.36.2.1.114.6.5.10.1
An entry in the mscAtmIfUniCallingAScrProvTable.
OBJECT-TYPE    
  MscAtmIfUniCallingAScrProvEntry  

mscAtmIfUniCallingAScrAdminStatus 1.3.6.1.4.1.562.36.2.1.114.6.5.10.1.1
This attribute specifies whether the calling address screening feature is enabled or disabled. If enabled, incoming SVC calls are screened against provisioned addresses. If enabled and the calling address in the ATM SVC call request is provisioned to be accepted, the call is accepted or rejected according to the action specified for that address. If the value is enabled, and the calling address in the address request is not provisioned, the call is rejected If the value is disabled, no calling address screening is performed.
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1)  

mscAtmIfUniCallingAScrDefaultInsertionAddress 1.3.6.1.4.1.562.36.2.1.114.6.5.10.1.2
This attribute specifies the address to be inserted into the SVC connection request if adminStatus is enabled and the connection request does not contain a calling address. If the adminStatus attribute is enabled and this attribute is empty, all incoming SVC calls which do not contain a calling address are rejected.
OBJECT-TYPE    
  HexString SIZE(0..20)  

mscAtmIfUniCallingAScrStatTable 1.3.6.1.4.1.562.36.2.1.114.6.5.11
This attribute group contains statistics related to the incoming SVC call requests received while the adminStatus attribute is set to enabled.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfUniCallingAScrStatEntry

mscAtmIfUniCallingAScrStatEntry 1.3.6.1.4.1.562.36.2.1.114.6.5.11.1
An entry in the mscAtmIfUniCallingAScrStatTable.
OBJECT-TYPE    
  MscAtmIfUniCallingAScrStatEntry  

mscAtmIfUniCallingAScrAcceptedCalls 1.3.6.1.4.1.562.36.2.1.114.6.5.11.1.1
This attribute counts the incoming SVC calls which were accepted because the address specified in the call request matched a provisioned ATM address and the associated action was accept. When the counter exceeds the maximum, it wraps to 0.
OBJECT-TYPE    
  Counter32  

mscAtmIfUniCallingAScrRejectedCalls 1.3.6.1.4.1.562.36.2.1.114.6.5.11.1.2
This attribute counts the incoming SVC calls which were rejected because the address specified in the call request matched a provisioned ATM address, but the associated action was reject. When the counter exceeds the maximum, it wraps to 0.
OBJECT-TYPE    
  Counter32  

mscAtmIfUniCallingAScrUnmatchedCalls 1.3.6.1.4.1.562.36.2.1.114.6.5.11.1.3
This attribute counts the incoming SVC calls which were rejected because none of the provisioned ATM addresses matched the applicable address in the incoming SVC call request. When the counter exceeds the maximum, it wraps to 0.
OBJECT-TYPE    
  Counter32  

mscAtmIfUniCalledAScr 1.3.6.1.4.1.562.36.2.1.114.6.6
OBJECT IDENTIFIER    

mscAtmIfUniCalledAScrRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.6.6.1
This entry controls the addition and deletion of mscAtmIfUniCalledAScr components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfUniCalledAScrRowStatusEntry

mscAtmIfUniCalledAScrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.6.6.1.1
A single entry in the table represents a single mscAtmIfUniCalledAScr component.
OBJECT-TYPE    
  MscAtmIfUniCalledAScrRowStatusEntry  

mscAtmIfUniCalledAScrRowStatus 1.3.6.1.4.1.562.36.2.1.114.6.6.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfUniCalledAScr components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfUniCalledAScrComponentName 1.3.6.1.4.1.562.36.2.1.114.6.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfUniCalledAScrStorageType 1.3.6.1.4.1.562.36.2.1.114.6.6.1.1.4
This variable represents the storage type value for the mscAtmIfUniCalledAScr tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfUniCalledAScrIndex 1.3.6.1.4.1.562.36.2.1.114.6.6.1.1.10
This variable represents the index for the mscAtmIfUniCalledAScr tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfUniCalledAScrAddr 1.3.6.1.4.1.562.36.2.1.114.6.6.2
OBJECT IDENTIFIER    

mscAtmIfUniCalledAScrAddrRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.6.6.2.1
This entry controls the addition and deletion of mscAtmIfUniCalledAScrAddr components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfUniCalledAScrAddrRowStatusEntry

mscAtmIfUniCalledAScrAddrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.6.6.2.1.1
A single entry in the table represents a single mscAtmIfUniCalledAScrAddr component.
OBJECT-TYPE    
  MscAtmIfUniCalledAScrAddrRowStatusEntry  

mscAtmIfUniCalledAScrAddrRowStatus 1.3.6.1.4.1.562.36.2.1.114.6.6.2.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfUniCalledAScrAddr components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfUniCalledAScrAddrComponentName 1.3.6.1.4.1.562.36.2.1.114.6.6.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfUniCalledAScrAddrStorageType 1.3.6.1.4.1.562.36.2.1.114.6.6.2.1.1.4
This variable represents the storage type value for the mscAtmIfUniCalledAScrAddr tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfUniCalledAScrAddrAddressIndex 1.3.6.1.4.1.562.36.2.1.114.6.6.2.1.1.10
This variable represents an index for the mscAtmIfUniCalledAScrAddr tables.
OBJECT-TYPE    
  AsciiStringIndex SIZE(1..40)  

mscAtmIfUniCalledAScrAddrAddressActionIndex 1.3.6.1.4.1.562.36.2.1.114.6.6.2.1.1.11
This variable represents an index for the mscAtmIfUniCalledAScrAddr tables.
OBJECT-TYPE    
  INTEGER accept(0), reject(1)  

mscAtmIfUniCalledAScrProvTable 1.3.6.1.4.1.562.36.2.1.114.6.6.10
This attribute group contains the provisionable attributes for the CalledAScr component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfUniCalledAScrProvEntry

mscAtmIfUniCalledAScrProvEntry 1.3.6.1.4.1.562.36.2.1.114.6.6.10.1
An entry in the mscAtmIfUniCalledAScrProvTable.
OBJECT-TYPE    
  MscAtmIfUniCalledAScrProvEntry  

mscAtmIfUniCalledAScrAdminStatus 1.3.6.1.4.1.562.36.2.1.114.6.6.10.1.1
This attribute specifies whether the called address screening feature is enabled or disabled. If the value is enabled, incoming SVC calls will be screened against provisioned called addresses. If the value is enabled and the called address in the ATM SVC call request has been provisioned, the call is accepted or rejected according to the action specified for that address. If the value is enabled and the called address in the call request is not provisioned, the call is rejected. If the value is disabled, no called address screening is performed.
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1)  

mscAtmIfUniCalledAScrStatTable 1.3.6.1.4.1.562.36.2.1.114.6.6.11
This attribute group contains statistics related to the incoming SVC call requests received while the adminStatus attribute is set to enabled.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfUniCalledAScrStatEntry

mscAtmIfUniCalledAScrStatEntry 1.3.6.1.4.1.562.36.2.1.114.6.6.11.1
An entry in the mscAtmIfUniCalledAScrStatTable.
OBJECT-TYPE    
  MscAtmIfUniCalledAScrStatEntry  

mscAtmIfUniCalledAScrAcceptedCalls 1.3.6.1.4.1.562.36.2.1.114.6.6.11.1.1
This attribute counts the incoming SVC calls which were accepted because the address specified in the call request matched a provisioned ATM address and the associated action was accept. When the counter exceeds the maximum, it wraps to 0.
OBJECT-TYPE    
  Counter32  

mscAtmIfUniCalledAScrRejectedCalls 1.3.6.1.4.1.562.36.2.1.114.6.6.11.1.2
This attribute counts the incoming SVC calls which were rejected because the address specified in the call request matched a provisioned ATM address, but the associated action was reject. When the counter exceeds the maximum, it wraps to 0.
OBJECT-TYPE    
  Counter32  

mscAtmIfUniCalledAScrUnmatchedCalls 1.3.6.1.4.1.562.36.2.1.114.6.6.11.1.3
This attribute counts the incoming SVC calls which were rejected because none of the provisioned ATM addresses matched the applicable address in the incoming SVC call request. When the counter exceeds the maximum, it wraps to 0.
OBJECT-TYPE    
  Counter32  

mscAtmIfUniProvTable 1.3.6.1.4.1.562.36.2.1.114.6.10
This group contains the provisionable attributes for the Uni component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfUniProvEntry

mscAtmIfUniProvEntry 1.3.6.1.4.1.562.36.2.1.114.6.10.1
An entry in the mscAtmIfUniProvTable.
OBJECT-TYPE    
  MscAtmIfUniProvEntry  

mscAtmIfUniVersion 1.3.6.1.4.1.562.36.2.1.114.6.10.1.1
This attribute specifies which specification the UNI complies with. The options are ATM FORUM 3.0, ATM FORUM 3.1 or ATM FORUM 4.0. If this attribute is changed then all switched Vcc components in this interface are cleared due to the fact that the two versions are incompatible.
OBJECT-TYPE    
  INTEGER atmForum30(0), atmForum31(1), atmForum40(5)  

mscAtmIfUniSide 1.3.6.1.4.1.562.36.2.1.114.6.10.1.2
This attribute indicates which side the interface is, user or network.
OBJECT-TYPE    
  INTEGER network(0), user(1)  

mscAtmIfUniSoftPvcRetryPeriod 1.3.6.1.4.1.562.36.2.1.114.6.10.1.3
This attribute represents the time in seconds to wait between call set up retries. The resolution is to the nearest 10 seconds. This attribute has been obsoleted and is replaced by the softPvpAndPvcRetryPeriod attribute.
OBJECT-TYPE    
  Unsigned32 20..999999  

mscAtmIfUniSoftPvpAndPvcRetryPeriod 1.3.6.1.4.1.562.36.2.1.114.6.10.1.4
This attribute represents the time in seconds to wait between soft PVP or soft PVC call setup retries. The resolution is to the nearest 10 seconds.
OBJECT-TYPE    
  Unsigned32 20..999999  

mscAtmIfUniSoftPvpAndPvcHoldOffTime 1.3.6.1.4.1.562.36.2.1.114.6.10.1.5
This attribute specifies how long to hold off retries following a release or the connection. The resolution is to the nearest 50 ms.
OBJECT-TYPE    
  Unsigned32 0 | 50..20000  

mscAtmIfUniLoopPrevention 1.3.6.1.4.1.562.36.2.1.114.6.10.1.6
This attribute specifies whether loop prevention is in effect on this interface. When the value is enabled, incoming calls on this interface cannot be routed back out the same interface. When the value is disabled, routing of incoming calls back out the same interface is permitted. The recommended value is enabled. The value disabled should only be used if routing of incoming calls back out over this interface is actually required. As an example, the value disabled might be needed if the interface is connected to an end-user multiplexing device which has no routing capability. Note that setting the value to enabled prevents only routing loops which involve two network nodes.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscAtmIfUniOperTable 1.3.6.1.4.1.562.36.2.1.114.6.11
This attribute group contains the operational attributes for the Uni component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfUniOperEntry

mscAtmIfUniOperEntry 1.3.6.1.4.1.562.36.2.1.114.6.11.1
An entry in the mscAtmIfUniOperTable.
OBJECT-TYPE    
  MscAtmIfUniOperEntry  

mscAtmIfUniMacAddress 1.3.6.1.4.1.562.36.2.1.114.6.11.1.1
This attribute indicates the MAC address of the port, which is used for address registration of the user side as the default ESI.
OBJECT-TYPE    
  AsciiString SIZE(12)  

mscAtmIfUniAcctOptTable 1.3.6.1.4.1.562.36.2.1.114.6.12
This group contains the provisionable attributes for accounting.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfUniAcctOptEntry

mscAtmIfUniAcctOptEntry 1.3.6.1.4.1.562.36.2.1.114.6.12.1
An entry in the mscAtmIfUniAcctOptTable.
OBJECT-TYPE    
  MscAtmIfUniAcctOptEntry  

mscAtmIfUniAccountCollection 1.3.6.1.4.1.562.36.2.1.114.6.12.1.1
This attribute is used to turn accounting on or off for SVC and SPVC connections. It also specifies the reason(s) for which accounting data is collected: billing, test, study, audit or force. If the set of reasons is not empty then accounting records will be generated by this interface in the following situations: - on a TODA changeover if TODA is enabled; - every 12 hours (per connection) if TODA is disabled; - on every call clear (a call record with final cell counts). If none of the reasons is present, then accounting will be suppressed. The reason for collection is recorded in the accounting record, in the attribute callingCollectReason or calledCollectReason as appropriate. Description of bits: bill(0) test(1) study(2) audit(3) force(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscAtmIfUniAccountConnectionType 1.3.6.1.4.1.562.36.2.1.114.6.12.1.2
This attribute specifies whether accounting records generated by this interface should be marked as originating, terminating or intermediate. This attribute, in combination with the direction of the call, determines the value of attribute connPointType of the accounting record and may be used by downstream accounting processes to correlate the records. If the value is origTerm then records generated for incoming calls will be marked as originating and records generated for outgoing calls will be marked as terminating. If the value is intermediate then records generated for all calls will be marked as intermediate.
OBJECT-TYPE    
  INTEGER origTerm(0), intermediate(1)  

mscAtmIfUniAccountClass 1.3.6.1.4.1.562.36.2.1.114.6.12.1.3
This attribute specifies the accounting class associated with the interface. Its meaning is determined by the network operator. Its value is simply recorded in the accounting records generated by this interface, in the attribute callingServiceType or calledServiceType as appropriate.
OBJECT-TYPE    
  Unsigned32 0..255  

mscAtmIfUniServiceExchange 1.3.6.1.4.1.562.36.2.1.114.6.12.1.4
This attribute specifies the data service exchange associated with this interface. Its meaning is determined by the network operator. Its value is simply recorded in the accounting records generated by this interface, in the attribute callingDse or calledDse as appropriate.
OBJECT-TYPE    
  Unsigned32 0..255  

mscAtmIfVptUni 1.3.6.1.4.1.562.36.2.1.114.9.8
OBJECT IDENTIFIER    

mscAtmIfVptUniRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.8.1
This entry controls the addition and deletion of mscAtmIfVptUni components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptUniRowStatusEntry

mscAtmIfVptUniRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.8.1.1
A single entry in the table represents a single mscAtmIfVptUni component.
OBJECT-TYPE    
  MscAtmIfVptUniRowStatusEntry  

mscAtmIfVptUniRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.8.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptUni components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptUniComponentName 1.3.6.1.4.1.562.36.2.1.114.9.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptUniStorageType 1.3.6.1.4.1.562.36.2.1.114.9.8.1.1.4
This variable represents the storage type value for the mscAtmIfVptUni tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfVptUniIndex 1.3.6.1.4.1.562.36.2.1.114.9.8.1.1.10
This variable represents the index for the mscAtmIfVptUni tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVptUniSig 1.3.6.1.4.1.562.36.2.1.114.9.8.2
OBJECT IDENTIFIER    

mscAtmIfVptUniSigRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.8.2.1
This entry controls the addition and deletion of mscAtmIfVptUniSig components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptUniSigRowStatusEntry

mscAtmIfVptUniSigRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.8.2.1.1
A single entry in the table represents a single mscAtmIfVptUniSig component.
OBJECT-TYPE    
  MscAtmIfVptUniSigRowStatusEntry  

mscAtmIfVptUniSigRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.8.2.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptUniSig components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptUniSigComponentName 1.3.6.1.4.1.562.36.2.1.114.9.8.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptUniSigStorageType 1.3.6.1.4.1.562.36.2.1.114.9.8.2.1.1.4
This variable represents the storage type value for the mscAtmIfVptUniSig tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfVptUniSigIndex 1.3.6.1.4.1.562.36.2.1.114.9.8.2.1.1.10
This variable represents the index for the mscAtmIfVptUniSig tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVptUniSigVcd 1.3.6.1.4.1.562.36.2.1.114.9.8.2.2
OBJECT IDENTIFIER    

mscAtmIfVptUniSigVcdRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.1
This entry controls the addition and deletion of mscAtmIfVptUniSigVcd components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptUniSigVcdRowStatusEntry

mscAtmIfVptUniSigVcdRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.1.1
A single entry in the table represents a single mscAtmIfVptUniSigVcd component.
OBJECT-TYPE    
  MscAtmIfVptUniSigVcdRowStatusEntry  

mscAtmIfVptUniSigVcdRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptUniSigVcd components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptUniSigVcdComponentName 1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptUniSigVcdStorageType 1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.1.1.4
This variable represents the storage type value for the mscAtmIfVptUniSigVcd tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfVptUniSigVcdIndex 1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.1.1.10
This variable represents the index for the mscAtmIfVptUniSigVcd tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVptUniSigVcdProvTable 1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.10
This group contains the provisionable traffic attributes for a control channel.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptUniSigVcdProvEntry

mscAtmIfVptUniSigVcdProvEntry 1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.10.1
An entry in the mscAtmIfVptUniSigVcdProvTable.
OBJECT-TYPE    
  MscAtmIfVptUniSigVcdProvEntry  

mscAtmIfVptUniSigVcdTrafficDescType 1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.10.1.1
This attribute specifies the type of traffic management which is applied to both the transmit and receive direction of this connection as defined in the ATM Forum. The trafficDescType determines the number and meaning of the parameters in the trafficDescParm attribute.
OBJECT-TYPE    
  INTEGER n3(3), n6(6), n7(7), n8(8)  

mscAtmIfVptUniSigVcdAtmServiceCategory 1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.10.1.3
This attribute specifies the ATM service category for both directions of the connection. The constantBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. The consistent availability of a fixed quantity of bandwidth is considered appropriate for CBR service. Cells which are delayed beyond the value specified by CellTransfer Delay are assumed to be of significantly reduce value to the application. The rtVariableBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. Sources are expected to transmit at a rate which varies with time. Equivalently, the source can be described as 'bursty'. Cells which are delayed beyond the value specified by CTD are assumed to be of significantly reduced value to the application. Real time VBR service may support statistical multiplexing of real time sources. The nrtVariableBitRate service category is intended for non-real time applications which have bursty traffic characteristics and which can be characterized in terms of a PCR, SCR, and MBS. For those cells which are transferred within the traffic contract, the application expects a low cell loss ratio. For all connections, it expects a bound on the mean cell transfer delay. Non-real time VBR service may support statistical multiplexing of connections. The unspecifiedBitRate service is intended for non-real time applications; that is, those not requiring tightly constrained delay and delay variation. UBR sources are expected to be bursty. UBR service supports a high degree of statistical multiplexing among sources. UBR service does not specify traffic related service guarantees. No numerical commitments are made with respect to the cell loss ratio experienced by a UBR connection, or as to the cell transfer delay experienced by cells on the connection.
OBJECT-TYPE    
  INTEGER unspecifiedBitRate(0), constantBitRate(1), rtVariableBitRate(2), nrtVariableBitRate(3)  

mscAtmIfVptUniSigVcdWeight 1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.10.1.4
This attribute specifies an override for the weight of this unshaped connection. This attribute is ignored for shaped connections, for ABR connections, for connections on a CQC-based ATM FP and basic VPTs. When the value is set to sameAsCa, the weight is determined by the weight policy attribute under the CA service category component for all but standard VPT VCCs. For standard VPT VCCs, the weight is determined by the VCC's service category, when the value is set to sameAsCa. When this attribute is set to a value from 1 to 4095, that value is used for the weight policy of this connection relative to other connections. For all but standard VPT VCCs, weight policy determines the proportion of transit cell opportunities which are allocated to this connection, compared to other connections in the same service category. For standard VPT VCCs, weight policy determines the proportion of transmit cell opportunities which are allocated to this connection, compared to other connections associated with the VPT. When the value is set to upToQueueLimit, the weight policy is limited only by the txQueueLimit. VALUES ( 0 = upToQueueLimit 65535 = sameAsCa )
OBJECT-TYPE    
  Unsigned32 0 | 1..4095 | 65535  

mscAtmIfVptUniSigVcdQosClass 1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.10.1.21
This attribute specifies the quality of service for both the forward and backward direction for this connection. Class 1 supports a QOS that meets Service Class A performance requirements (Circuit emulation, constant bit rate video). Class 2 supports a QOS that meets Service Class B performance requirements (Variable bit rate audio and video). Class 3 supports a QOS that meets Service Class C performance requirements (Connection-Oriented Data Transfer). Class 4 supports a QOS that meets Service Class D performance requirements (Connectionless Data Transfer). Class 0 is the unspecified bit rate QOS class; no objective is specified for the performance parameters.
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4)  

mscAtmIfVptUniSigVcdTrafficShaping 1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.10.1.50
This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled.
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

mscAtmIfVptUniSigVcdUnshapedTransmitQueueing 1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.10.1.60
This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this connection if it is unshaped. Refer to the unshapedTransmitQueueing attribute under the AtmIf CA service category subcomponent for more details on the meaning of this attribute. When this attribute is set to sameAsCa, the transmit queueing method for the connection is based on the unshapedTransmitQueueing attribute of the connection's service category component under the ConnectionAdministrator. When this attribute is set to common, transmit traffic on this unshaped connection is destined for the common queue. The value sameAsInterface is for migration from previous software releases, but should no longer be used
OBJECT-TYPE    
  INTEGER common(1), sameAsCa(3)  

mscAtmIfVptUniSigVcdUsageParameterControl 1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.10.1.70
This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface. When sameAsCa is selected, UPC for the connection is based on the usageParameterControl attribute of the connection's service category component under the ConnectionAdministrator. If the service category has UPC enabled, then UPC is enabled for the connection. Note that enabling UPC may have no effect under certain cases. These cases are listed in the description of the usageParameterControl operational attribute, which is under the Vcc Tm or Vpc Tm component. When disabled is selected, UPC for this connection is disabled. The value sameAsInterface is for migration from previous software releases, but should no longer be used
OBJECT-TYPE    
  INTEGER disabled(1), sameAsCa(2)  

mscAtmIfVptUniSigVcdTdpTable 1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.387
This attribute is a vector of five traffic parameters whose meanings are defined by the trafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR) and requested shaping rate are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. CDVT is expressed in microseconds. The values of PCR, SCR, MBS and CDVT are used for connection admission control (CAC). The value of CDVT is only used for connections where the atmServiceCategory is constantBitRate. For all other values of atmServiceCategory, CDVT is ignored. The values of PCR, SCR and requested shaping rate are used to determine the actual shaping rate where traffic shaping is enabled. When trafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3 must be zero. When trafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. Whenever it is valid for PCR to be specified, parameter 5 may also be used to specify a requested shaping rate. A non-zero value in parameter 5 overrides the value in parameter 1 and is used as the peak cell rate in calculations of CAC and shaping rate. For trafficDescType 3 the traffic is shaped at the next rate less than the PCR. For trafficDescType 6, 7, and 8, the traffic is shaped at the highest available rate which is between PCR and SCR. However, if there is no available shaping rate between PCR and SCR, traffic is shaped at the next rate above the PCR.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptUniSigVcdTdpEntry

mscAtmIfVptUniSigVcdTdpEntry 1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.387.1
An entry in the mscAtmIfVptUniSigVcdTdpTable.
OBJECT-TYPE    
  MscAtmIfVptUniSigVcdTdpEntry  

mscAtmIfVptUniSigVcdTdpIndex 1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.387.1.1
This variable represents the mscAtmIfVptUniSigVcdTdpTable specific index for the mscAtmIfVptUniSigVcdTdpTable.
OBJECT-TYPE    
  Integer32 1..5  

mscAtmIfVptUniSigVcdTdpValue 1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.387.1.2
This variable represents an individual value for the mscAtmIfVptUniSigVcdTdpTable.
OBJECT-TYPE    
  Unsigned32 0..2147483647  

mscAtmIfVptUniSigProvTable 1.3.6.1.4.1.562.36.2.1.114.9.8.2.10
This attribute group contains the provisionable attributes for the Signalling component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptUniSigProvEntry

mscAtmIfVptUniSigProvEntry 1.3.6.1.4.1.562.36.2.1.114.9.8.2.10.1
An entry in the mscAtmIfVptUniSigProvTable.
OBJECT-TYPE    
  MscAtmIfVptUniSigProvEntry  

mscAtmIfVptUniSigVci 1.3.6.1.4.1.562.36.2.1.114.9.8.2.10.1.1
This attribute specifies the signalling channel number.
OBJECT-TYPE    
  Unsigned32 0..65535  

mscAtmIfVptUniSigAddressConversion 1.3.6.1.4.1.562.36.2.1.114.9.8.2.10.1.2
This attribute specifies the address conversion on the outgoing signalling PDUs. The options are none, nativeE164, or nsap. The none option is the default and if this option is chosen then nothing is done to the address information element (IE) in the outgoing signalling message. If nativeE164 option is chosen, then only NSAP encapsulated E.164 addresses with zeros in the ESI are converted to native E.164 format in the outgoing signalling message. If the NSAP address is not encapsulated E.164 or the ESI field is not zeros and the nativeE164 option is chosen, then the call is cleared. If the nsap option is chosen, then native E.164 addresses are converted to NSAP E.164 with zeros in the ESI field; otherwise the address is in NSAP format and is not changed.
OBJECT-TYPE    
  INTEGER none(0), nativeE164(1), nsap(2)  

mscAtmIfVptUniSigOperatingMode 1.3.6.1.4.1.562.36.2.1.114.9.8.2.10.1.3
This attribute specifies the operating mode of the signaling channel. provisionedOnly indicates that only SPVCs and SPVPs are supported on the interface and SVCs are not supported. This value is permitted only on UNI interfaces. normal indicates that SVCs, SPVCs, and SPVPs are supported on the interface.
OBJECT-TYPE    
  INTEGER normal(0), provisionedOnly(1)  

mscAtmIfVptUniSigStateTable 1.3.6.1.4.1.562.36.2.1.114.9.8.2.11
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptUniSigStateEntry

mscAtmIfVptUniSigStateEntry 1.3.6.1.4.1.562.36.2.1.114.9.8.2.11.1
An entry in the mscAtmIfVptUniSigStateTable.
OBJECT-TYPE    
  MscAtmIfVptUniSigStateEntry  

mscAtmIfVptUniSigAdminState 1.3.6.1.4.1.562.36.2.1.114.9.8.2.11.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscAtmIfVptUniSigOperationalState 1.3.6.1.4.1.562.36.2.1.114.9.8.2.11.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscAtmIfVptUniSigUsageState 1.3.6.1.4.1.562.36.2.1.114.9.8.2.11.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscAtmIfVptUniSigOperTable 1.3.6.1.4.1.562.36.2.1.114.9.8.2.12
This attribute contains the operational attributes for the AtmSignalling component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptUniSigOperEntry

mscAtmIfVptUniSigOperEntry 1.3.6.1.4.1.562.36.2.1.114.9.8.2.12.1
An entry in the mscAtmIfVptUniSigOperTable.
OBJECT-TYPE    
  MscAtmIfVptUniSigOperEntry  

mscAtmIfVptUniSigLastTxCauseCode 1.3.6.1.4.1.562.36.2.1.114.9.8.2.12.1.1
This attribute indicates the cause code in the last transmitted signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages.
OBJECT-TYPE    
  Unsigned32 0..255  

mscAtmIfVptUniSigLastTxDiagCode 1.3.6.1.4.1.562.36.2.1.114.9.8.2.12.1.2
This attribute contains the diagnostic code in the last transmitted signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0.
OBJECT-TYPE    
  Hex 0..255  

mscAtmIfVptUniSigLastRxCauseCode 1.3.6.1.4.1.562.36.2.1.114.9.8.2.12.1.3
This attribute contains the cause code in the last received signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages.
OBJECT-TYPE    
  Unsigned32 0..255  

mscAtmIfVptUniSigLastRxDiagCode 1.3.6.1.4.1.562.36.2.1.114.9.8.2.12.1.4
This attribute contains the diagnostic code in the last received signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0.
OBJECT-TYPE    
  Hex 0..255  

mscAtmIfVptUniSigStatsTable 1.3.6.1.4.1.562.36.2.1.114.9.8.2.13
This attribute group contains the statistics associated with the AtmSignalling component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptUniSigStatsEntry

mscAtmIfVptUniSigStatsEntry 1.3.6.1.4.1.562.36.2.1.114.9.8.2.13.1
An entry in the mscAtmIfVptUniSigStatsTable.
OBJECT-TYPE    
  MscAtmIfVptUniSigStatsEntry  

mscAtmIfVptUniSigCurrentConnections 1.3.6.1.4.1.562.36.2.1.114.9.8.2.13.1.1
This attribute indicates the total number of currently active connections.
OBJECT-TYPE    
  Counter32  

mscAtmIfVptUniSigPeakConnections 1.3.6.1.4.1.562.36.2.1.114.9.8.2.13.1.2
This attribute indicates the high water mark of active point-to- point and point-to-multipoint connections.
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAtmIfVptUniSigSuccessfulConnections 1.3.6.1.4.1.562.36.2.1.114.9.8.2.13.1.3
This attribute counts the total number of switched point-to- point and point-to-multipoint connections that were successfully established. The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

mscAtmIfVptUniSigFailedConnections 1.3.6.1.4.1.562.36.2.1.114.9.8.2.13.1.4
This attribute counts the total number of switched connections that were not successfully established.The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

mscAtmIfVptUniSigTxPdus 1.3.6.1.4.1.562.36.2.1.114.9.8.2.13.1.5
This attribute counts the number of transmitted signalling PDUs.The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

mscAtmIfVptUniSigRxPdus 1.3.6.1.4.1.562.36.2.1.114.9.8.2.13.1.6
This attribute counts the number of received signalling PDUs.The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

mscAtmIfVptUniSigCurrentPmpConnections 1.3.6.1.4.1.562.36.2.1.114.9.8.2.13.1.7
This attribute indicates the number of currently active point-to- multipoint connections.
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAtmIfVptUniSigPeakPmpConnections 1.3.6.1.4.1.562.36.2.1.114.9.8.2.13.1.8
This attribute indicates the high water mark of active point-to- multipoint connections.
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAtmIfVptUniSigSuccessfulPmpConnections 1.3.6.1.4.1.562.36.2.1.114.9.8.2.13.1.9
This attribute counts the total number of switched point-to- multipoint connections that were successfully established. The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

mscAtmIfVptUniSigFailedPmpConnections 1.3.6.1.4.1.562.36.2.1.114.9.8.2.13.1.10
This attribute counts the number of switched point-to- multipoint connections that were not successfully established.The counter wraps to 0 when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

mscAtmIfVptUniSigNewCurrentConnections 1.3.6.1.4.1.562.36.2.1.114.9.8.2.13.1.11
This attribute indicates the total number of currently active point-to- point and point-to-multipoint connections.
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscAtmIfVptUniAddr 1.3.6.1.4.1.562.36.2.1.114.9.8.3
OBJECT IDENTIFIER    

mscAtmIfVptUniAddrRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.8.3.1
This entry controls the addition and deletion of mscAtmIfVptUniAddr components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptUniAddrRowStatusEntry

mscAtmIfVptUniAddrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.8.3.1.1
A single entry in the table represents a single mscAtmIfVptUniAddr component.
OBJECT-TYPE    
  MscAtmIfVptUniAddrRowStatusEntry  

mscAtmIfVptUniAddrRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.8.3.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptUniAddr components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptUniAddrComponentName 1.3.6.1.4.1.562.36.2.1.114.9.8.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptUniAddrStorageType 1.3.6.1.4.1.562.36.2.1.114.9.8.3.1.1.4
This variable represents the storage type value for the mscAtmIfVptUniAddr tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfVptUniAddrAddressIndex 1.3.6.1.4.1.562.36.2.1.114.9.8.3.1.1.10
This variable represents an index for the mscAtmIfVptUniAddr tables.
OBJECT-TYPE    
  AsciiStringIndex SIZE(1..40)  

mscAtmIfVptUniAddrAddressTypeIndex 1.3.6.1.4.1.562.36.2.1.114.9.8.3.1.1.11
This variable represents an index for the mscAtmIfVptUniAddr tables.
OBJECT-TYPE    
  INTEGER primary(0), alternate(1), registered(2), default(3)  

mscAtmIfVptUniAddrTermSP 1.3.6.1.4.1.562.36.2.1.114.9.8.3.2
OBJECT IDENTIFIER    

mscAtmIfVptUniAddrTermSPRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.8.3.2.1
This entry controls the addition and deletion of mscAtmIfVptUniAddrTermSP components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptUniAddrTermSPRowStatusEntry

mscAtmIfVptUniAddrTermSPRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.8.3.2.1.1
A single entry in the table represents a single mscAtmIfVptUniAddrTermSP component.
OBJECT-TYPE    
  MscAtmIfVptUniAddrTermSPRowStatusEntry  

mscAtmIfVptUniAddrTermSPRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.8.3.2.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptUniAddrTermSP components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptUniAddrTermSPComponentName 1.3.6.1.4.1.562.36.2.1.114.9.8.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptUniAddrTermSPStorageType 1.3.6.1.4.1.562.36.2.1.114.9.8.3.2.1.1.4
This variable represents the storage type value for the mscAtmIfVptUniAddrTermSP tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfVptUniAddrTermSPIndex 1.3.6.1.4.1.562.36.2.1.114.9.8.3.2.1.1.10
This variable represents the index for the mscAtmIfVptUniAddrTermSP tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVptUniAddrPnniInfo 1.3.6.1.4.1.562.36.2.1.114.9.8.3.3
OBJECT IDENTIFIER    

mscAtmIfVptUniAddrPnniInfoRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.8.3.3.1
This entry controls the addition and deletion of mscAtmIfVptUniAddrPnniInfo components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptUniAddrPnniInfoRowStatusEntry

mscAtmIfVptUniAddrPnniInfoRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.8.3.3.1.1
A single entry in the table represents a single mscAtmIfVptUniAddrPnniInfo component.
OBJECT-TYPE    
  MscAtmIfVptUniAddrPnniInfoRowStatusEntry  

mscAtmIfVptUniAddrPnniInfoRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.8.3.3.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptUniAddrPnniInfo components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptUniAddrPnniInfoComponentName 1.3.6.1.4.1.562.36.2.1.114.9.8.3.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptUniAddrPnniInfoStorageType 1.3.6.1.4.1.562.36.2.1.114.9.8.3.3.1.1.4
This variable represents the storage type value for the mscAtmIfVptUniAddrPnniInfo tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfVptUniAddrPnniInfoIndex 1.3.6.1.4.1.562.36.2.1.114.9.8.3.3.1.1.10
This variable represents the index for the mscAtmIfVptUniAddrPnniInfo tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVptUniAddrPnniInfoProvTable 1.3.6.1.4.1.562.36.2.1.114.9.8.3.3.10
This attribute group contains the provisioned attributes relating to PNNI for a PnniInfo component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptUniAddrPnniInfoProvEntry

mscAtmIfVptUniAddrPnniInfoProvEntry 1.3.6.1.4.1.562.36.2.1.114.9.8.3.3.10.1
An entry in the mscAtmIfVptUniAddrPnniInfoProvTable.
OBJECT-TYPE    
  MscAtmIfVptUniAddrPnniInfoProvEntry  

mscAtmIfVptUniAddrPnniInfoScope 1.3.6.1.4.1.562.36.2.1.114.9.8.3.3.10.1.1
This attribute specifies the scope of the ATM address, which is the highest level up to which this address will be advertised in the PNNI hierarchy. The scope must be set to a value numerically less than or equal to the level of the lowest level peer group containing this node. Setting the scope to 0 will cause the address to be advertised globally within this PNNI routing domain.
OBJECT-TYPE    
  INTEGER -1..104  

mscAtmIfVptUniAddrPnniInfoReachability 1.3.6.1.4.1.562.36.2.1.114.9.8.3.3.10.1.2
This attribute indicates whether the address is internal or exterior. An internal reachable address is an address of a destination that is directly attached to the logical node advertising the address. An exterior reachable address is an address that can be reached through a PNNI routing domain, but which is not located in that PNNI routing domain.
OBJECT-TYPE    
  INTEGER internal(0), exterior(1)  

mscAtmIfVptUniAddrOperTable 1.3.6.1.4.1.562.36.2.1.114.9.8.3.10
This attribute group contains the operational attributes for the Address component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptUniAddrOperEntry

mscAtmIfVptUniAddrOperEntry 1.3.6.1.4.1.562.36.2.1.114.9.8.3.10.1
An entry in the mscAtmIfVptUniAddrOperTable.
OBJECT-TYPE    
  MscAtmIfVptUniAddrOperEntry  

mscAtmIfVptUniAddrScope 1.3.6.1.4.1.562.36.2.1.114.9.8.3.10.1.1
This attribute indicates the scope of the ATM address, which is the highest level to which this address will be advertised in the PNNI hierarchy. If no PnniInfo subcomponent has been provisioned, then the scope will default to the level of this node in the PNNI hierarchy. If this node does not participate in a PNNI hierarchy, then this attribute will have the value of -1.
OBJECT-TYPE    
  INTEGER -1..104  

mscAtmIfVptUniAddrReachability 1.3.6.1.4.1.562.36.2.1.114.9.8.3.10.1.2
This attribute indicates whether the address is internal or exterior. An internal reachable address is an address of a destination that is directly attached to the logical node advertising the address. An exterior reachable address is an address that can be reached through a PNNI routing domain, but which is not located in that PNNI routing domain.
OBJECT-TYPE    
  INTEGER internal(0), exterior(1)  

mscAtmIfVptUniCallingAScr 1.3.6.1.4.1.562.36.2.1.114.9.8.4
OBJECT IDENTIFIER    

mscAtmIfVptUniCallingAScrRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.8.4.1
This entry controls the addition and deletion of mscAtmIfVptUniCallingAScr components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptUniCallingAScrRowStatusEntry

mscAtmIfVptUniCallingAScrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.8.4.1.1
A single entry in the table represents a single mscAtmIfVptUniCallingAScr component.
OBJECT-TYPE    
  MscAtmIfVptUniCallingAScrRowStatusEntry  

mscAtmIfVptUniCallingAScrRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.8.4.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptUniCallingAScr components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptUniCallingAScrComponentName 1.3.6.1.4.1.562.36.2.1.114.9.8.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptUniCallingAScrStorageType 1.3.6.1.4.1.562.36.2.1.114.9.8.4.1.1.4
This variable represents the storage type value for the mscAtmIfVptUniCallingAScr tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfVptUniCallingAScrIndex 1.3.6.1.4.1.562.36.2.1.114.9.8.4.1.1.10
This variable represents the index for the mscAtmIfVptUniCallingAScr tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVptUniCallingAScrAddr 1.3.6.1.4.1.562.36.2.1.114.9.8.4.2
OBJECT IDENTIFIER    

mscAtmIfVptUniCallingAScrAddrRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.8.4.2.1
This entry controls the addition and deletion of mscAtmIfVptUniCallingAScrAddr components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptUniCallingAScrAddrRowStatusEntry

mscAtmIfVptUniCallingAScrAddrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.8.4.2.1.1
A single entry in the table represents a single mscAtmIfVptUniCallingAScrAddr component.
OBJECT-TYPE    
  MscAtmIfVptUniCallingAScrAddrRowStatusEntry  

mscAtmIfVptUniCallingAScrAddrRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.8.4.2.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptUniCallingAScrAddr components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptUniCallingAScrAddrComponentName 1.3.6.1.4.1.562.36.2.1.114.9.8.4.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptUniCallingAScrAddrStorageType 1.3.6.1.4.1.562.36.2.1.114.9.8.4.2.1.1.4
This variable represents the storage type value for the mscAtmIfVptUniCallingAScrAddr tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfVptUniCallingAScrAddrAddressIndex 1.3.6.1.4.1.562.36.2.1.114.9.8.4.2.1.1.10
This variable represents an index for the mscAtmIfVptUniCallingAScrAddr tables.
OBJECT-TYPE    
  AsciiStringIndex SIZE(1..40)  

mscAtmIfVptUniCallingAScrAddrAddressActionIndex 1.3.6.1.4.1.562.36.2.1.114.9.8.4.2.1.1.11
This variable represents an index for the mscAtmIfVptUniCallingAScrAddr tables.
OBJECT-TYPE    
  INTEGER accept(0), reject(1)  

mscAtmIfVptUniCallingAScrProvTable 1.3.6.1.4.1.562.36.2.1.114.9.8.4.10
This attribute group contains the provisionable attributes for the CallingAScr component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptUniCallingAScrProvEntry

mscAtmIfVptUniCallingAScrProvEntry 1.3.6.1.4.1.562.36.2.1.114.9.8.4.10.1
An entry in the mscAtmIfVptUniCallingAScrProvTable.
OBJECT-TYPE    
  MscAtmIfVptUniCallingAScrProvEntry  

mscAtmIfVptUniCallingAScrAdminStatus 1.3.6.1.4.1.562.36.2.1.114.9.8.4.10.1.1
This attribute specifies whether the calling address screening feature is enabled or disabled. If enabled, incoming SVC calls are screened against provisioned addresses. If enabled and the calling address in the ATM SVC call request is provisioned to be accepted, the call is accepted or rejected according to the action specified for that address. If the value is enabled, and the calling address in the address request is not provisioned, the call is rejected If the value is disabled, no calling address screening is performed.
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1)  

mscAtmIfVptUniCallingAScrDefaultInsertionAddress 1.3.6.1.4.1.562.36.2.1.114.9.8.4.10.1.2
This attribute specifies the address to be inserted into the SVC connection request if adminStatus is enabled and the connection request does not contain a calling address. If the adminStatus attribute is enabled and this attribute is empty, all incoming SVC calls which do not contain a calling address are rejected.
OBJECT-TYPE    
  HexString SIZE(0..20)  

mscAtmIfVptUniCallingAScrStatTable 1.3.6.1.4.1.562.36.2.1.114.9.8.4.11
This attribute group contains statistics related to the incoming SVC call requests received while the adminStatus attribute is set to enabled.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptUniCallingAScrStatEntry

mscAtmIfVptUniCallingAScrStatEntry 1.3.6.1.4.1.562.36.2.1.114.9.8.4.11.1
An entry in the mscAtmIfVptUniCallingAScrStatTable.
OBJECT-TYPE    
  MscAtmIfVptUniCallingAScrStatEntry  

mscAtmIfVptUniCallingAScrAcceptedCalls 1.3.6.1.4.1.562.36.2.1.114.9.8.4.11.1.1
This attribute counts the incoming SVC calls which were accepted because the address specified in the call request matched a provisioned ATM address and the associated action was accept. When the counter exceeds the maximum, it wraps to 0.
OBJECT-TYPE    
  Counter32  

mscAtmIfVptUniCallingAScrRejectedCalls 1.3.6.1.4.1.562.36.2.1.114.9.8.4.11.1.2
This attribute counts the incoming SVC calls which were rejected because the address specified in the call request matched a provisioned ATM address, but the associated action was reject. When the counter exceeds the maximum, it wraps to 0.
OBJECT-TYPE    
  Counter32  

mscAtmIfVptUniCallingAScrUnmatchedCalls 1.3.6.1.4.1.562.36.2.1.114.9.8.4.11.1.3
This attribute counts the incoming SVC calls which were rejected because none of the provisioned ATM addresses matched the applicable address in the incoming SVC call request. When the counter exceeds the maximum, it wraps to 0.
OBJECT-TYPE    
  Counter32  

mscAtmIfVptUniCalledAScr 1.3.6.1.4.1.562.36.2.1.114.9.8.5
OBJECT IDENTIFIER    

mscAtmIfVptUniCalledAScrRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.8.5.1
This entry controls the addition and deletion of mscAtmIfVptUniCalledAScr components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptUniCalledAScrRowStatusEntry

mscAtmIfVptUniCalledAScrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.8.5.1.1
A single entry in the table represents a single mscAtmIfVptUniCalledAScr component.
OBJECT-TYPE    
  MscAtmIfVptUniCalledAScrRowStatusEntry  

mscAtmIfVptUniCalledAScrRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.8.5.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptUniCalledAScr components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptUniCalledAScrComponentName 1.3.6.1.4.1.562.36.2.1.114.9.8.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptUniCalledAScrStorageType 1.3.6.1.4.1.562.36.2.1.114.9.8.5.1.1.4
This variable represents the storage type value for the mscAtmIfVptUniCalledAScr tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfVptUniCalledAScrIndex 1.3.6.1.4.1.562.36.2.1.114.9.8.5.1.1.10
This variable represents the index for the mscAtmIfVptUniCalledAScr tables.
OBJECT-TYPE    
  NonReplicated  

mscAtmIfVptUniCalledAScrAddr 1.3.6.1.4.1.562.36.2.1.114.9.8.5.2
OBJECT IDENTIFIER    

mscAtmIfVptUniCalledAScrAddrRowStatusTable 1.3.6.1.4.1.562.36.2.1.114.9.8.5.2.1
This entry controls the addition and deletion of mscAtmIfVptUniCalledAScrAddr components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptUniCalledAScrAddrRowStatusEntry

mscAtmIfVptUniCalledAScrAddrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.114.9.8.5.2.1.1
A single entry in the table represents a single mscAtmIfVptUniCalledAScrAddr component.
OBJECT-TYPE    
  MscAtmIfVptUniCalledAScrAddrRowStatusEntry  

mscAtmIfVptUniCalledAScrAddrRowStatus 1.3.6.1.4.1.562.36.2.1.114.9.8.5.2.1.1.1
This variable is used as the basis for SNMP naming of mscAtmIfVptUniCalledAScrAddr components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscAtmIfVptUniCalledAScrAddrComponentName 1.3.6.1.4.1.562.36.2.1.114.9.8.5.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscAtmIfVptUniCalledAScrAddrStorageType 1.3.6.1.4.1.562.36.2.1.114.9.8.5.2.1.1.4
This variable represents the storage type value for the mscAtmIfVptUniCalledAScrAddr tables.
OBJECT-TYPE    
  StorageType  

mscAtmIfVptUniCalledAScrAddrAddressIndex 1.3.6.1.4.1.562.36.2.1.114.9.8.5.2.1.1.10
This variable represents an index for the mscAtmIfVptUniCalledAScrAddr tables.
OBJECT-TYPE    
  AsciiStringIndex SIZE(1..40)  

mscAtmIfVptUniCalledAScrAddrAddressActionIndex 1.3.6.1.4.1.562.36.2.1.114.9.8.5.2.1.1.11
This variable represents an index for the mscAtmIfVptUniCalledAScrAddr tables.
OBJECT-TYPE    
  INTEGER accept(0), reject(1)  

mscAtmIfVptUniCalledAScrProvTable 1.3.6.1.4.1.562.36.2.1.114.9.8.5.10
This attribute group contains the provisionable attributes for the CalledAScr component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptUniCalledAScrProvEntry

mscAtmIfVptUniCalledAScrProvEntry 1.3.6.1.4.1.562.36.2.1.114.9.8.5.10.1
An entry in the mscAtmIfVptUniCalledAScrProvTable.
OBJECT-TYPE    
  MscAtmIfVptUniCalledAScrProvEntry  

mscAtmIfVptUniCalledAScrAdminStatus 1.3.6.1.4.1.562.36.2.1.114.9.8.5.10.1.1
This attribute specifies whether the called address screening feature is enabled or disabled. If the value is enabled, incoming SVC calls will be screened against provisioned called addresses. If the value is enabled and the called address in the ATM SVC call request has been provisioned, the call is accepted or rejected according to the action specified for that address. If the value is enabled and the called address in the call request is not provisioned, the call is rejected. If the value is disabled, no called address screening is performed.
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1)  

mscAtmIfVptUniCalledAScrStatTable 1.3.6.1.4.1.562.36.2.1.114.9.8.5.11
This attribute group contains statistics related to the incoming SVC call requests received while the adminStatus attribute is set to enabled.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptUniCalledAScrStatEntry

mscAtmIfVptUniCalledAScrStatEntry 1.3.6.1.4.1.562.36.2.1.114.9.8.5.11.1
An entry in the mscAtmIfVptUniCalledAScrStatTable.
OBJECT-TYPE    
  MscAtmIfVptUniCalledAScrStatEntry  

mscAtmIfVptUniCalledAScrAcceptedCalls 1.3.6.1.4.1.562.36.2.1.114.9.8.5.11.1.1
This attribute counts the incoming SVC calls which were accepted because the address specified in the call request matched a provisioned ATM address and the associated action was accept. When the counter exceeds the maximum, it wraps to 0.
OBJECT-TYPE    
  Counter32  

mscAtmIfVptUniCalledAScrRejectedCalls 1.3.6.1.4.1.562.36.2.1.114.9.8.5.11.1.2
This attribute counts the incoming SVC calls which were rejected because the address specified in the call request matched a provisioned ATM address, but the associated action was reject. When the counter exceeds the maximum, it wraps to 0.
OBJECT-TYPE    
  Counter32  

mscAtmIfVptUniCalledAScrUnmatchedCalls 1.3.6.1.4.1.562.36.2.1.114.9.8.5.11.1.3
This attribute counts the incoming SVC calls which were rejected because none of the provisioned ATM addresses matched the applicable address in the incoming SVC call request. When the counter exceeds the maximum, it wraps to 0.
OBJECT-TYPE    
  Counter32  

mscAtmIfVptUniProvTable 1.3.6.1.4.1.562.36.2.1.114.9.8.10
This group contains the provisionable attributes for the Uni component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptUniProvEntry

mscAtmIfVptUniProvEntry 1.3.6.1.4.1.562.36.2.1.114.9.8.10.1
An entry in the mscAtmIfVptUniProvTable.
OBJECT-TYPE    
  MscAtmIfVptUniProvEntry  

mscAtmIfVptUniVersion 1.3.6.1.4.1.562.36.2.1.114.9.8.10.1.1
This attribute specifies which specification the UNI complies with. The options are ATM FORUM 3.0, ATM FORUM 3.1 or ATM FORUM 4.0. If this attribute is changed then all switched Vcc components in this interface are cleared due to the fact that the two versions are incompatible.
OBJECT-TYPE    
  INTEGER atmForum30(0), atmForum31(1), atmForum40(5)  

mscAtmIfVptUniSide 1.3.6.1.4.1.562.36.2.1.114.9.8.10.1.2
This attribute indicates which side the interface is, user or network.
OBJECT-TYPE    
  INTEGER network(0), user(1)  

mscAtmIfVptUniSoftPvcRetryPeriod 1.3.6.1.4.1.562.36.2.1.114.9.8.10.1.3
This attribute represents the time in seconds to wait between call set up retries. The resolution is to the nearest 10 seconds. This attribute has been obsoleted and is replaced by the softPvpAndPvcRetryPeriod attribute.
OBJECT-TYPE    
  Unsigned32 20..999999  

mscAtmIfVptUniSoftPvpAndPvcRetryPeriod 1.3.6.1.4.1.562.36.2.1.114.9.8.10.1.4
This attribute represents the time in seconds to wait between soft PVP or soft PVC call setup retries. The resolution is to the nearest 10 seconds.
OBJECT-TYPE    
  Unsigned32 20..999999  

mscAtmIfVptUniSoftPvpAndPvcHoldOffTime 1.3.6.1.4.1.562.36.2.1.114.9.8.10.1.5
This attribute specifies how long to hold off retries following a release or the connection. The resolution is to the nearest 50 ms.
OBJECT-TYPE    
  Unsigned32 0 | 50..20000  

mscAtmIfVptUniLoopPrevention 1.3.6.1.4.1.562.36.2.1.114.9.8.10.1.6
This attribute specifies whether loop prevention is in effect on this interface. When the value is enabled, incoming calls on this interface cannot be routed back out the same interface. When the value is disabled, routing of incoming calls back out the same interface is permitted. The recommended value is enabled. The value disabled should only be used if routing of incoming calls back out over this interface is actually required. As an example, the value disabled might be needed if the interface is connected to an end-user multiplexing device which has no routing capability. Note that setting the value to enabled prevents only routing loops which involve two network nodes.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscAtmIfVptUniAcctOptTable 1.3.6.1.4.1.562.36.2.1.114.9.8.11
This group contains the provisionable attributes for accounting.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptUniAcctOptEntry

mscAtmIfVptUniAcctOptEntry 1.3.6.1.4.1.562.36.2.1.114.9.8.11.1
An entry in the mscAtmIfVptUniAcctOptTable.
OBJECT-TYPE    
  MscAtmIfVptUniAcctOptEntry  

mscAtmIfVptUniAccountCollection 1.3.6.1.4.1.562.36.2.1.114.9.8.11.1.1
This attribute is used to turn accounting on or off for SVC and SPVC connections. It also specifies the reason(s) for which accounting data is collected: billing, test, study, audit or force. If the set of reasons is not empty then accounting records will be generated by this interface in the following situations: - on a TODA changeover if TODA is enabled; - every 12 hours (per connection) if TODA is disabled; - on every call clear (a call record with final cell counts). If none of the reasons is present, then accounting will be suppressed. The reason for collection is recorded in the accounting record, in the attribute callingCollectReason or calledCollectReason as appropriate. Description of bits: bill(0) test(1) study(2) audit(3) force(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscAtmIfVptUniAccountConnectionType 1.3.6.1.4.1.562.36.2.1.114.9.8.11.1.2
This attribute specifies whether accounting records generated by this interface should be marked as originating, terminating or intermediate. This attribute, in combination with the direction of the call, determines the value of attribute connPointType of the accounting record and may be used by downstream accounting processes to correlate the records. If the value is origTerm then records generated for incoming calls will be marked as originating and records generated for outgoing calls will be marked as terminating. If the value is intermediate then records generated for all calls will be marked as intermediate.
OBJECT-TYPE    
  INTEGER origTerm(0), intermediate(1)  

mscAtmIfVptUniAccountClass 1.3.6.1.4.1.562.36.2.1.114.9.8.11.1.3
This attribute specifies the accounting class associated with the interface. Its meaning is determined by the network operator. Its value is simply recorded in the accounting records generated by this interface, in the attribute callingServiceType or calledServiceType as appropriate.
OBJECT-TYPE    
  Unsigned32 0..255  

mscAtmIfVptUniServiceExchange 1.3.6.1.4.1.562.36.2.1.114.9.8.11.1.4
This attribute specifies the data service exchange associated with this interface. Its meaning is determined by the network operator. Its value is simply recorded in the accounting records generated by this interface, in the attribute callingDse or calledDse as appropriate.
OBJECT-TYPE    
  Unsigned32 0..255  

mscAtmIfVptUniVProvTable 1.3.6.1.4.1.562.36.2.1.114.9.8.12
This group contains the provisionable attributes for the Uni component which are specific to virtual UNI interfaces.
OBJECT-TYPE    
  SEQUENCE OF  
    MscAtmIfVptUniVProvEntry

mscAtmIfVptUniVProvEntry 1.3.6.1.4.1.562.36.2.1.114.9.8.12.1
An entry in the mscAtmIfVptUniVProvTable.
OBJECT-TYPE    
  MscAtmIfVptUniVProvEntry  

mscAtmIfVptUniVpci 1.3.6.1.4.1.562.36.2.1.114.9.8.12.1.1
This attribute specifies the Virtual Path Connection Identifier (VPCI) to be used between this signalling entity and its peer. The VPCI of the peer virtual UNI must have the same value for switched connections to be set up across the interface.
OBJECT-TYPE    
  Unsigned32 0..255  

atmUniMIB 1.3.6.1.4.1.562.36.2.2.69
OBJECT IDENTIFIER    

atmUniGroup 1.3.6.1.4.1.562.36.2.2.69.1
OBJECT IDENTIFIER    

atmUniGroupCA 1.3.6.1.4.1.562.36.2.2.69.1.1
OBJECT IDENTIFIER    

atmUniGroupCA02 1.3.6.1.4.1.562.36.2.2.69.1.1.3
OBJECT IDENTIFIER    

atmUniGroupCA02A 1.3.6.1.4.1.562.36.2.2.69.1.1.3.2
OBJECT IDENTIFIER    

atmUniCapabilities 1.3.6.1.4.1.562.36.2.2.69.3
OBJECT IDENTIFIER    

atmUniCapabilitiesCA 1.3.6.1.4.1.562.36.2.2.69.3.1
OBJECT IDENTIFIER    

atmUniCapabilitiesCA02 1.3.6.1.4.1.562.36.2.2.69.3.1.3
OBJECT IDENTIFIER    

atmUniCapabilitiesCA02A 1.3.6.1.4.1.562.36.2.2.69.3.1.3.2
OBJECT IDENTIFIER    

Defined Objects

MscAtmIfUniRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfUniRowStatus  
  DisplayString as mscAtmIfUniComponentName  
  StorageType as mscAtmIfUniStorageType  
  NonReplicated as mscAtmIfUniIndex  

MscAtmIfUniProvEntry  
SEQUENCE    
  INTEGER as mscAtmIfUniVersion  
  INTEGER as mscAtmIfUniSide  
  Unsigned32 as mscAtmIfUniSoftPvcRetryPeriod  
  Unsigned32 as mscAtmIfUniSoftPvpAndPvcRetryPeriod  
  Unsigned32 as mscAtmIfUniSoftPvpAndPvcHoldOffTime  
  INTEGER as mscAtmIfUniLoopPrevention  

MscAtmIfUniOperEntry  
SEQUENCE    
  AsciiString as mscAtmIfUniMacAddress  

MscAtmIfUniAcctOptEntry  
SEQUENCE    
  OCTET STRING as mscAtmIfUniAccountCollection  
  INTEGER as mscAtmIfUniAccountConnectionType  
  Unsigned32 as mscAtmIfUniAccountClass  
  Unsigned32 as mscAtmIfUniServiceExchange  

MscAtmIfUniIlmiRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfUniIlmiRowStatus  
  DisplayString as mscAtmIfUniIlmiComponentName  
  StorageType as mscAtmIfUniIlmiStorageType  
  NonReplicated as mscAtmIfUniIlmiIndex  

MscAtmIfUniIlmiStateEntry  
SEQUENCE    
  INTEGER as mscAtmIfUniIlmiAdminState  
  INTEGER as mscAtmIfUniIlmiOperationalState  
  INTEGER as mscAtmIfUniIlmiUsageState  

MscAtmIfUniIlmiProvEntry  
SEQUENCE    
  Unsigned32 as mscAtmIfUniIlmiVci  
  INTEGER as mscAtmIfUniIlmiOperatingMode  

MscAtmIfUniIlmiStatsEntry  
SEQUENCE    
  Counter32 as mscAtmIfUniIlmiTxPdus  
  Counter32 as mscAtmIfUniIlmiRxPdus  
  Counter32 as mscAtmIfUniIlmiRxBadPdusDiscarded  

MscAtmIfUniIlmiPrefixToRegisterEntry  
SEQUENCE    
  AsciiString as mscAtmIfUniIlmiPrefixToRegisterValue  
  RowStatus as mscAtmIfUniIlmiPrefixToRegisterRowStatus  

MscAtmIfUniIlmiEsiToRegisterEntry  
SEQUENCE    
  AsciiString as mscAtmIfUniIlmiEsiToRegisterValue  
  RowStatus as mscAtmIfUniIlmiEsiToRegisterRowStatus  

MscAtmIfUniSigRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfUniSigRowStatus  
  DisplayString as mscAtmIfUniSigComponentName  
  StorageType as mscAtmIfUniSigStorageType  
  NonReplicated as mscAtmIfUniSigIndex  

MscAtmIfUniSigProvEntry  
SEQUENCE    
  Unsigned32 as mscAtmIfUniSigVci  
  INTEGER as mscAtmIfUniSigAddressConversion  
  INTEGER as mscAtmIfUniSigOperatingMode  

MscAtmIfUniSigStateEntry  
SEQUENCE    
  INTEGER as mscAtmIfUniSigAdminState  
  INTEGER as mscAtmIfUniSigOperationalState  
  INTEGER as mscAtmIfUniSigUsageState  

MscAtmIfUniSigOperEntry  
SEQUENCE    
  Unsigned32 as mscAtmIfUniSigLastTxCauseCode  
  Hex as mscAtmIfUniSigLastTxDiagCode  
  Unsigned32 as mscAtmIfUniSigLastRxCauseCode  
  Hex as mscAtmIfUniSigLastRxDiagCode  

MscAtmIfUniSigStatsEntry  
SEQUENCE    
  Counter32 as mscAtmIfUniSigCurrentConnections  
  Gauge32 as mscAtmIfUniSigPeakConnections  
  Counter32 as mscAtmIfUniSigSuccessfulConnections  
  Counter32 as mscAtmIfUniSigFailedConnections  
  Counter32 as mscAtmIfUniSigTxPdus  
  Counter32 as mscAtmIfUniSigRxPdus  
  Gauge32 as mscAtmIfUniSigCurrentPmpConnections  
  Gauge32 as mscAtmIfUniSigPeakPmpConnections  
  Counter32 as mscAtmIfUniSigSuccessfulPmpConnections  
  Counter32 as mscAtmIfUniSigFailedPmpConnections  
  Gauge32 as mscAtmIfUniSigNewCurrentConnections  

MscAtmIfUniSigVcdRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfUniSigVcdRowStatus  
  DisplayString as mscAtmIfUniSigVcdComponentName  
  StorageType as mscAtmIfUniSigVcdStorageType  
  NonReplicated as mscAtmIfUniSigVcdIndex  

MscAtmIfUniSigVcdProvEntry  
SEQUENCE    
  INTEGER as mscAtmIfUniSigVcdTrafficDescType  
  INTEGER as mscAtmIfUniSigVcdAtmServiceCategory  
  Unsigned32 as mscAtmIfUniSigVcdWeight  
  INTEGER as mscAtmIfUniSigVcdQosClass  
  INTEGER as mscAtmIfUniSigVcdTrafficShaping  
  INTEGER as mscAtmIfUniSigVcdUnshapedTransmitQueueing  
  INTEGER as mscAtmIfUniSigVcdUsageParameterControl  

MscAtmIfUniSigVcdTdpEntry  
SEQUENCE    
  Integer32 as mscAtmIfUniSigVcdTdpIndex  
  Unsigned32 as mscAtmIfUniSigVcdTdpValue  

MscAtmIfUniAddrRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfUniAddrRowStatus  
  DisplayString as mscAtmIfUniAddrComponentName  
  StorageType as mscAtmIfUniAddrStorageType  
  AsciiStringIndex as mscAtmIfUniAddrAddressIndex  
  INTEGER as mscAtmIfUniAddrAddressTypeIndex  

MscAtmIfUniAddrOperEntry  
SEQUENCE    
  INTEGER as mscAtmIfUniAddrScope  
  INTEGER as mscAtmIfUniAddrReachability  

MscAtmIfUniAddrTermSPRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfUniAddrTermSPRowStatus  
  DisplayString as mscAtmIfUniAddrTermSPComponentName  
  StorageType as mscAtmIfUniAddrTermSPStorageType  
  NonReplicated as mscAtmIfUniAddrTermSPIndex  

MscAtmIfUniAddrPnniInfoRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfUniAddrPnniInfoRowStatus  
  DisplayString as mscAtmIfUniAddrPnniInfoComponentName  
  StorageType as mscAtmIfUniAddrPnniInfoStorageType  
  NonReplicated as mscAtmIfUniAddrPnniInfoIndex  

MscAtmIfUniAddrPnniInfoProvEntry  
SEQUENCE    
  INTEGER as mscAtmIfUniAddrPnniInfoScope  
  INTEGER as mscAtmIfUniAddrPnniInfoReachability  

MscAtmIfUniCallingAScrRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfUniCallingAScrRowStatus  
  DisplayString as mscAtmIfUniCallingAScrComponentName  
  StorageType as mscAtmIfUniCallingAScrStorageType  
  NonReplicated as mscAtmIfUniCallingAScrIndex  

MscAtmIfUniCallingAScrProvEntry  
SEQUENCE    
  INTEGER as mscAtmIfUniCallingAScrAdminStatus  
  HexString as mscAtmIfUniCallingAScrDefaultInsertionAddress  

MscAtmIfUniCallingAScrStatEntry  
SEQUENCE    
  Counter32 as mscAtmIfUniCallingAScrAcceptedCalls  
  Counter32 as mscAtmIfUniCallingAScrRejectedCalls  
  Counter32 as mscAtmIfUniCallingAScrUnmatchedCalls  

MscAtmIfUniCallingAScrAddrRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfUniCallingAScrAddrRowStatus  
  DisplayString as mscAtmIfUniCallingAScrAddrComponentName  
  StorageType as mscAtmIfUniCallingAScrAddrStorageType  
  AsciiStringIndex as mscAtmIfUniCallingAScrAddrAddressIndex  
  INTEGER as mscAtmIfUniCallingAScrAddrAddressActionIndex  

MscAtmIfUniCalledAScrRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfUniCalledAScrRowStatus  
  DisplayString as mscAtmIfUniCalledAScrComponentName  
  StorageType as mscAtmIfUniCalledAScrStorageType  
  NonReplicated as mscAtmIfUniCalledAScrIndex  

MscAtmIfUniCalledAScrProvEntry  
SEQUENCE    
  INTEGER as mscAtmIfUniCalledAScrAdminStatus  

MscAtmIfUniCalledAScrStatEntry  
SEQUENCE    
  Counter32 as mscAtmIfUniCalledAScrAcceptedCalls  
  Counter32 as mscAtmIfUniCalledAScrRejectedCalls  
  Counter32 as mscAtmIfUniCalledAScrUnmatchedCalls  

MscAtmIfUniCalledAScrAddrRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfUniCalledAScrAddrRowStatus  
  DisplayString as mscAtmIfUniCalledAScrAddrComponentName  
  StorageType as mscAtmIfUniCalledAScrAddrStorageType  
  AsciiStringIndex as mscAtmIfUniCalledAScrAddrAddressIndex  
  INTEGER as mscAtmIfUniCalledAScrAddrAddressActionIndex  

MscAtmIfVptUniRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfVptUniRowStatus  
  DisplayString as mscAtmIfVptUniComponentName  
  StorageType as mscAtmIfVptUniStorageType  
  NonReplicated as mscAtmIfVptUniIndex  

MscAtmIfVptUniProvEntry  
SEQUENCE    
  INTEGER as mscAtmIfVptUniVersion  
  INTEGER as mscAtmIfVptUniSide  
  Unsigned32 as mscAtmIfVptUniSoftPvcRetryPeriod  
  Unsigned32 as mscAtmIfVptUniSoftPvpAndPvcRetryPeriod  
  Unsigned32 as mscAtmIfVptUniSoftPvpAndPvcHoldOffTime  
  INTEGER as mscAtmIfVptUniLoopPrevention  

MscAtmIfVptUniAcctOptEntry  
SEQUENCE    
  OCTET STRING as mscAtmIfVptUniAccountCollection  
  INTEGER as mscAtmIfVptUniAccountConnectionType  
  Unsigned32 as mscAtmIfVptUniAccountClass  
  Unsigned32 as mscAtmIfVptUniServiceExchange  

MscAtmIfVptUniVProvEntry  
SEQUENCE    
  Unsigned32 as mscAtmIfVptUniVpci  

MscAtmIfVptUniSigRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfVptUniSigRowStatus  
  DisplayString as mscAtmIfVptUniSigComponentName  
  StorageType as mscAtmIfVptUniSigStorageType  
  NonReplicated as mscAtmIfVptUniSigIndex  

MscAtmIfVptUniSigProvEntry  
SEQUENCE    
  Unsigned32 as mscAtmIfVptUniSigVci  
  INTEGER as mscAtmIfVptUniSigAddressConversion  
  INTEGER as mscAtmIfVptUniSigOperatingMode  

MscAtmIfVptUniSigStateEntry  
SEQUENCE    
  INTEGER as mscAtmIfVptUniSigAdminState  
  INTEGER as mscAtmIfVptUniSigOperationalState  
  INTEGER as mscAtmIfVptUniSigUsageState  

MscAtmIfVptUniSigOperEntry  
SEQUENCE    
  Unsigned32 as mscAtmIfVptUniSigLastTxCauseCode  
  Hex as mscAtmIfVptUniSigLastTxDiagCode  
  Unsigned32 as mscAtmIfVptUniSigLastRxCauseCode  
  Hex as mscAtmIfVptUniSigLastRxDiagCode  

MscAtmIfVptUniSigStatsEntry  
SEQUENCE    
  Counter32 as mscAtmIfVptUniSigCurrentConnections  
  Gauge32 as mscAtmIfVptUniSigPeakConnections  
  Counter32 as mscAtmIfVptUniSigSuccessfulConnections  
  Counter32 as mscAtmIfVptUniSigFailedConnections  
  Counter32 as mscAtmIfVptUniSigTxPdus  
  Counter32 as mscAtmIfVptUniSigRxPdus  
  Gauge32 as mscAtmIfVptUniSigCurrentPmpConnections  
  Gauge32 as mscAtmIfVptUniSigPeakPmpConnections  
  Counter32 as mscAtmIfVptUniSigSuccessfulPmpConnections  
  Counter32 as mscAtmIfVptUniSigFailedPmpConnections  
  Gauge32 as mscAtmIfVptUniSigNewCurrentConnections  

MscAtmIfVptUniSigVcdRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfVptUniSigVcdRowStatus  
  DisplayString as mscAtmIfVptUniSigVcdComponentName  
  StorageType as mscAtmIfVptUniSigVcdStorageType  
  NonReplicated as mscAtmIfVptUniSigVcdIndex  

MscAtmIfVptUniSigVcdProvEntry  
SEQUENCE    
  INTEGER as mscAtmIfVptUniSigVcdTrafficDescType  
  INTEGER as mscAtmIfVptUniSigVcdAtmServiceCategory  
  Unsigned32 as mscAtmIfVptUniSigVcdWeight  
  INTEGER as mscAtmIfVptUniSigVcdQosClass  
  INTEGER as mscAtmIfVptUniSigVcdTrafficShaping  
  INTEGER as mscAtmIfVptUniSigVcdUnshapedTransmitQueueing  
  INTEGER as mscAtmIfVptUniSigVcdUsageParameterControl  

MscAtmIfVptUniSigVcdTdpEntry  
SEQUENCE    
  Integer32 as mscAtmIfVptUniSigVcdTdpIndex  
  Unsigned32 as mscAtmIfVptUniSigVcdTdpValue  

MscAtmIfVptUniAddrRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfVptUniAddrRowStatus  
  DisplayString as mscAtmIfVptUniAddrComponentName  
  StorageType as mscAtmIfVptUniAddrStorageType  
  AsciiStringIndex as mscAtmIfVptUniAddrAddressIndex  
  INTEGER as mscAtmIfVptUniAddrAddressTypeIndex  

MscAtmIfVptUniAddrOperEntry  
SEQUENCE    
  INTEGER as mscAtmIfVptUniAddrScope  
  INTEGER as mscAtmIfVptUniAddrReachability  

MscAtmIfVptUniAddrTermSPRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfVptUniAddrTermSPRowStatus  
  DisplayString as mscAtmIfVptUniAddrTermSPComponentName  
  StorageType as mscAtmIfVptUniAddrTermSPStorageType  
  NonReplicated as mscAtmIfVptUniAddrTermSPIndex  

MscAtmIfVptUniAddrPnniInfoRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfVptUniAddrPnniInfoRowStatus  
  DisplayString as mscAtmIfVptUniAddrPnniInfoComponentName  
  StorageType as mscAtmIfVptUniAddrPnniInfoStorageType  
  NonReplicated as mscAtmIfVptUniAddrPnniInfoIndex  

MscAtmIfVptUniAddrPnniInfoProvEntry  
SEQUENCE    
  INTEGER as mscAtmIfVptUniAddrPnniInfoScope  
  INTEGER as mscAtmIfVptUniAddrPnniInfoReachability  

MscAtmIfVptUniCallingAScrRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfVptUniCallingAScrRowStatus  
  DisplayString as mscAtmIfVptUniCallingAScrComponentName  
  StorageType as mscAtmIfVptUniCallingAScrStorageType  
  NonReplicated as mscAtmIfVptUniCallingAScrIndex  

MscAtmIfVptUniCallingAScrProvEntry  
SEQUENCE    
  INTEGER as mscAtmIfVptUniCallingAScrAdminStatus  
  HexString as mscAtmIfVptUniCallingAScrDefaultInsertionAddress  

MscAtmIfVptUniCallingAScrStatEntry  
SEQUENCE    
  Counter32 as mscAtmIfVptUniCallingAScrAcceptedCalls  
  Counter32 as mscAtmIfVptUniCallingAScrRejectedCalls  
  Counter32 as mscAtmIfVptUniCallingAScrUnmatchedCalls  

MscAtmIfVptUniCallingAScrAddrRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfVptUniCallingAScrAddrRowStatus  
  DisplayString as mscAtmIfVptUniCallingAScrAddrComponentName  
  StorageType as mscAtmIfVptUniCallingAScrAddrStorageType  
  AsciiStringIndex as mscAtmIfVptUniCallingAScrAddrAddressIndex  
  INTEGER as mscAtmIfVptUniCallingAScrAddrAddressActionIndex  

MscAtmIfVptUniCalledAScrRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfVptUniCalledAScrRowStatus  
  DisplayString as mscAtmIfVptUniCalledAScrComponentName  
  StorageType as mscAtmIfVptUniCalledAScrStorageType  
  NonReplicated as mscAtmIfVptUniCalledAScrIndex  

MscAtmIfVptUniCalledAScrProvEntry  
SEQUENCE    
  INTEGER as mscAtmIfVptUniCalledAScrAdminStatus  

MscAtmIfVptUniCalledAScrStatEntry  
SEQUENCE    
  Counter32 as mscAtmIfVptUniCalledAScrAcceptedCalls  
  Counter32 as mscAtmIfVptUniCalledAScrRejectedCalls  
  Counter32 as mscAtmIfVptUniCalledAScrUnmatchedCalls  

MscAtmIfVptUniCalledAScrAddrRowStatusEntry  
SEQUENCE    
  RowStatus as mscAtmIfVptUniCalledAScrAddrRowStatus  
  DisplayString as mscAtmIfVptUniCalledAScrAddrComponentName  
  StorageType as mscAtmIfVptUniCalledAScrAddrStorageType  
  AsciiStringIndex as mscAtmIfVptUniCalledAScrAddrAddressIndex  
  INTEGER as mscAtmIfVptUniCalledAScrAddrAddressActionIndex