Nortel-MsCarrier-MscPassport-BridgeMIB

File: Nortel-MsCarrier-MscPassport-BridgeMIB.mib (675503 bytes)

Imported modules

RFC-1212 Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB
Nortel-MsCarrier-MscPassport-TextualConventionsMIB Nortel-MsCarrier-MscPassport-VirtualRouterMIB

Imported symbols

OBJECT-TYPE mscPassportMIBs mscComponents
Counter32 DisplayString StorageType
RowStatus BridgeId InterfaceIndex
Gauge32 Integer32 MacAddress
Unsigned32 AsciiString Hex
NonReplicated HexString Link
AsciiStringIndex DashedHexString mscVrIndex
mscVrPp mscVrPpIndex mscVr

Defined Objects

mscVrPpTbcl 1.3.6.1.4.1.562.36.2.1.100.3.2
OBJECT IDENTIFIER    

mscVrPpTbclRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.3.2.1
This entry controls the addition and deletion of mscVrPpTbcl components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbclRowStatusEntry

mscVrPpTbclRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.3.2.1.1
A single entry in the table represents a single mscVrPpTbcl component.
OBJECT-TYPE    
  MscVrPpTbclRowStatusEntry  

mscVrPpTbclRowStatus 1.3.6.1.4.1.562.36.2.1.100.3.2.1.1.1
This variable is used as the basis for SNMP naming of mscVrPpTbcl components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscVrPpTbclComponentName 1.3.6.1.4.1.562.36.2.1.100.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscVrPpTbclStorageType 1.3.6.1.4.1.562.36.2.1.100.3.2.1.1.4
This variable represents the storage type value for the mscVrPpTbcl tables.
OBJECT-TYPE    
  StorageType  

mscVrPpTbclIndex 1.3.6.1.4.1.562.36.2.1.100.3.2.1.1.10
This variable represents the index for the mscVrPpTbcl tables.
OBJECT-TYPE    
  NonReplicated  

mscVrPpTbclNs 1.3.6.1.4.1.562.36.2.1.100.3.2.2
OBJECT IDENTIFIER    

mscVrPpTbclNsRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.3.2.2.1
This entry controls the addition and deletion of mscVrPpTbclNs components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbclNsRowStatusEntry

mscVrPpTbclNsRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.3.2.2.1.1
A single entry in the table represents a single mscVrPpTbclNs component.
OBJECT-TYPE    
  MscVrPpTbclNsRowStatusEntry  

mscVrPpTbclNsRowStatus 1.3.6.1.4.1.562.36.2.1.100.3.2.2.1.1.1
This variable is used as the basis for SNMP naming of mscVrPpTbclNs components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscVrPpTbclNsComponentName 1.3.6.1.4.1.562.36.2.1.100.3.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscVrPpTbclNsStorageType 1.3.6.1.4.1.562.36.2.1.100.3.2.2.1.1.4
This variable represents the storage type value for the mscVrPpTbclNs tables.
OBJECT-TYPE    
  StorageType  

mscVrPpTbclNsIndex 1.3.6.1.4.1.562.36.2.1.100.3.2.2.1.1.10
This variable represents the index for the mscVrPpTbclNs tables.
OBJECT-TYPE    
  NonReplicated  

mscVrPpTbclNsProvTable 1.3.6.1.4.1.562.36.2.1.100.3.2.2.10
This group houses all the port specific provisionable attributes associated with Ns. These attributes influence the application of filters to incoming and outgoing frames.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbclNsProvEntry

mscVrPpTbclNsProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.2.2.10.1
An entry in the mscVrPpTbclNsProvTable.
OBJECT-TYPE    
  MscVrPpTbclNsProvEntry  

mscVrPpTbclNsIncomingFilter 1.3.6.1.4.1.562.36.2.1.100.3.2.2.10.1.2
This attribute specifies the name of the filter to be applied at the incoming filter point.
OBJECT-TYPE    
  AsciiString SIZE(0..32)  

mscVrPpTbclNsOutgoingFilter 1.3.6.1.4.1.562.36.2.1.100.3.2.2.10.1.3
This attribute specifies the name of the filter to be applied at the out going filter point.
OBJECT-TYPE    
  AsciiString SIZE(0..32)  

mscVrPpTbclProvTable 1.3.6.1.4.1.562.36.2.1.100.3.2.10
This group houses all the provisionable attributes that belong to the this group. This group of attributes is applicable to all types of bridge ports and represent the common factor between them. These attributes influence the working of a bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbclProvEntry

mscVrPpTbclProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.2.10.1
An entry in the mscVrPpTbclProvTable.
OBJECT-TYPE    
  MscVrPpTbclProvEntry  

mscVrPpTbclTranslateIpx 1.3.6.1.4.1.562.36.2.1.100.3.2.10.1.1
This attribute specifies the type of translation to be performed on frames carrying IPX packets. Ethernet frames carrying IPX payload could be translated to IEEE 802.3 frames (with the same IPX payload) or vice- versa. The main reason to do so is to allow the bridge unit to consistently forward one type of frames carrying IPX packets. Translations can be turned off altogether in which case the IPX frames will pass through the bridge unit unchanged.
OBJECT-TYPE    
  INTEGER off(0), ieee8023(1), ethernet(2), snap(3), sap(4)  

mscVrPpTbclFragmentIp 1.3.6.1.4.1.562.36.2.1.100.3.2.10.1.2
This attribute specifies if or not outbound frames carrying IP datagrams should be fragmented to conform to message transfer unit (mtu) sizes dictated by the media.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpTbclServiceClass 1.3.6.1.4.1.562.36.2.1.100.3.2.10.1.3
This attribute specifies if the frames should be ordered or not before they are transmitted through a bridge port. If this attribute has a value of ordered the received frames are ordered as in the original message, before they are transmitted out through a bridge port. If it has a value of notOrdered, received then frames pass through the bridge unit in the order they are received. This feature can be used over multiple telecommunication links to increase data flow. Please note that this attribute only affects link protocols and is ineffective with lan media.
OBJECT-TYPE    
  INTEGER ordered(0), notOrdered(1)  

mscVrPpTbclConvertArpMacAddress 1.3.6.1.4.1.562.36.2.1.100.3.2.10.1.4
This attribute is indicative of the state of the MAC address format conversion process for ARP/RARP frames. The MAC addresses may be translated if need be from a canonical format to a non-canonical format, based on the needs of the associated media. If this attribute is set to a value of on then all Mac addresses will converted if need be to suit the format of mac address, the outgoing media will support. If this attribute is set to a value of off no such conversion takes place.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpTbclPortNum 1.3.6.1.4.1.562.36.2.1.100.3.2.10.1.5
This attribute is indicative of the unique number assigned to the bridge port. It is used for SNMP management of this bridge port and in spanning tree as an identifier this bridge port. Notes regarding portNum: Escape routines exist for initializing, copying, and deleting port numbers. This is necessary because SNMP requires a unique port instance identifier. The initPortNum escape routine sets the port number to a value in the range 1-255 for this purpose. The setCopiedPortNum escape routine exists to maintain the uniqueness of the port number in cases when one port is copied to another. When a bridge port is deleted, the releasePortNum escape routine places the port number being released into a pending deletion state. This is because the port number cannot be re-allocated until the port is truely deleted in the current view. This is necessary since there is no guarantee of order when processing changes to multiple protocol ports so without the pending deletion state, the same port number could be temporarily assigned to two ports for a short period of time. The portNum is set as component critical since bridging also uses the port number as a key for indexing into its data structures. If a port is deleted then re-added under the same protocol port, CAS treats the change as a SET to the portNum attribute.
OBJECT-TYPE    
  Unsigned32 0..255  

mscVrPpTbclTbProvTable 1.3.6.1.4.1.562.36.2.1.100.3.2.11
This group houses all the port specific provisionable attributes that belong to the Tb group. The Tb group is only applicable bridge port types that operate in the TB mode. These attributes in part influence the working of a bridge port operating in the TB mode.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbclTbProvEntry

mscVrPpTbclTbProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.2.11.1
An entry in the mscVrPpTbclTbProvTable.
OBJECT-TYPE    
  MscVrPpTbclTbProvEntry  

mscVrPpTbclSecureOption 1.3.6.1.4.1.562.36.2.1.100.3.2.11.1.1
This attribute specifies whether the port secure feature is enabled. The secure feature, if enabled causes the following things to happen: a) disallows dynamic learning, b) disallows frames to be forwarded that do not satisfy the following condition: the mac address of the source should be found in the forwarding table and the destination mac address of the frame should also be found in the forwarding table. In addition to this, the port the frame was received on should figure as the in port, given the destination mac address found in the frame. c) disallows frames to be forwarded if the allowed to go port map for the destination mac address is empty. This feature in effect allows the user to choose the hosts that can generate traffic and the hosts that can receive traffic through this bridge unit.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscVrPpTbclStpProvTable 1.3.6.1.4.1.562.36.2.1.100.3.2.12
This group houses all the port specific provisionable attributes that belong to the Stp group. The Stp group is applicable to all the bridge ports that participate in the spanning tree protocol. These attributes influence the participation of the bridge port in the spanning tree protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbclStpProvEntry

mscVrPpTbclStpProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.2.12.1
An entry in the mscVrPpTbclStpProvTable.
OBJECT-TYPE    
  MscVrPpTbclStpProvEntry  

mscVrPpTbclAdminStatus 1.3.6.1.4.1.562.36.2.1.100.3.2.12.1.1
This attribute defines the current administrative state for this component. enabled indicates that the component is available for operation. disabled indicates the component is unavailable for operation.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mscVrPpTbclPortStateStpControl 1.3.6.1.4.1.562.36.2.1.100.3.2.12.1.2
This attribute specifies whether or not spanning tree protocol state for this bridge port is controlled by the spanning tree protocol. In essence it indicates the participation of this bridge port in the spanning tree protocol, by accepting and acting on received bridge protocol data units and by sending out the same. on signifies that this bridge port's spanning tree port state is controlled by the spanning tree protocol. A value of off signifies that the spanning tree port state of this bridge port is unaffected by the spanning tree protocol. This in effect puts the bridge port out of reach of the spanning tree protocol and in the forwarding state. Care should be taken while assigning a value of off to this attribute, as this might cause network loops. Please do not set this attribute to off unless you are absolutely sure about the effect of such an action on your network topology.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpTbclStpTypeProv 1.3.6.1.4.1.562.36.2.1.100.3.2.12.1.3
This attribute specifies the type of spanning tree protocol the port is participating in. A bridge port could participate in either the ieee8021 spanning tree protocol or the dec spanning tree protocol. If the value of the attribute protocolSpec in the SpanningTreeProtocol component, provisioned under the TransparentBridge component is in conflict with the value of this attribute, the value of the protocolSpec attribute will prevail. Prevailing stp type is reflected in the value of the attribute stpTypeOper.
OBJECT-TYPE    
  INTEGER dec(2), ieee8021(3)  

mscVrPpTbclPortPriority 1.3.6.1.4.1.562.36.2.1.100.3.2.12.1.4
This attribute specifies the value for port priority, which is contained in the first octet of the port identifier. Valid values are as follows: 1) 0..255 for stp type DEC and 2) 0..65535 for stp type IEEE.
OBJECT-TYPE    
  Unsigned32 0..65535  

mscVrPpTbclPathCost 1.3.6.1.4.1.562.36.2.1.100.3.2.12.1.5
This attribute specifies the contribution of this port, to all the paths to the root bridge that include this port. Please note that the value of the attribute pathCostMethod is applied only when the value of the attribute pathCostMethod is set to on and is ignored if otherwise.
OBJECT-TYPE    
  Unsigned32 1..65535  

mscVrPpTbclPathCostMethod 1.3.6.1.4.1.562.36.2.1.100.3.2.12.1.6
This attribute specifies the method used by the bridging logic, to calculate the path cost to the bridge considered to be the root bridge in the spanning tree topology. This attribute should be set to off before attempting to provision a value for pathCostProv.
OBJECT-TYPE    
  INTEGER off(1), dec(2), ieee8021(3)  

mscVrPpTbclDIProvTable 1.3.6.1.4.1.562.36.2.1.100.3.2.13
This group houses all the provisionable, domain specific attributes for a non-encapsulating bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbclDIProvEntry

mscVrPpTbclDIProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.2.13.1
An entry in the mscVrPpTbclDIProvTable.
OBJECT-TYPE    
  MscVrPpTbclDIProvEntry  

mscVrPpTbclDomainNum 1.3.6.1.4.1.562.36.2.1.100.3.2.13.1.1
This attribute specifies the domain number associated with this bridge port. Domain numbers are used for confining frames to a domain. Domain based filtering provides a complete segregation of traffic based on domain number associated with frames. There can exist only sixteen domains when a spanning tree is desired specific to each domain. When there is only a single spanning tree spanning all the domains the maximum number of domains possible are 4294967293. This attribute is of no relevance when associated with backbone bridge port. Its value is ignored in such a situation.
OBJECT-TYPE    
  Unsigned32 1..4294967293  

mscVrPpTbclPreserveDomain 1.3.6.1.4.1.562.36.2.1.100.3.2.13.1.2
This attribute specifies if the domain information should be preserved or embedded in the frame header. This attribute applies only to backbone ports and does not affect the access bridge ports. By setting this attribute to a value of on, domain information could be preserved in frames being tunnelled across the a backbone, so that this information can be deciphered at the other end of the backbone tunnel. This preserves the integrity of the domains thus preventing domain breaches while tunnelling frames across backbone network. If the value of this attribute is set to off then domain information is not preserved in the header of the frames tunnelling through the backbone. This eliminates the overhead incurred to preserve domain information across the backbone while tunnelling frames across it. Preserve domain is relevant when used in conjunction with the following media: FDDI, ATM MPE, Frame Relay and PPP. It is ignored when used with other types of media.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpTbclStateTable 1.3.6.1.4.1.562.36.2.1.100.3.2.14
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbclStateEntry

mscVrPpTbclStateEntry 1.3.6.1.4.1.562.36.2.1.100.3.2.14.1
An entry in the mscVrPpTbclStateTable.
OBJECT-TYPE    
  MscVrPpTbclStateEntry  

mscVrPpTbclAdminState 1.3.6.1.4.1.562.36.2.1.100.3.2.14.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscVrPpTbclOperationalState 1.3.6.1.4.1.562.36.2.1.100.3.2.14.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscVrPpTbclUsageState 1.3.6.1.4.1.562.36.2.1.100.3.2.14.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscVrPpTbclOperStatusTable 1.3.6.1.4.1.562.36.2.1.100.3.2.15
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbclOperStatusEntry

mscVrPpTbclOperStatusEntry 1.3.6.1.4.1.562.36.2.1.100.3.2.15.1
An entry in the mscVrPpTbclOperStatusTable.
OBJECT-TYPE    
  MscVrPpTbclOperStatusEntry  

mscVrPpTbclSnmpOperStatus 1.3.6.1.4.1.562.36.2.1.100.3.2.15.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscVrPpTbclOperTable 1.3.6.1.4.1.562.36.2.1.100.3.2.16
This group houses all the operational attributes belonging to the base group. The base group of attributes is applicable to all types of bridge ports and represent the common factor between them. These attributes in part, reflect the state of a bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbclOperEntry

mscVrPpTbclOperEntry 1.3.6.1.4.1.562.36.2.1.100.3.2.16.1
An entry in the mscVrPpTbclOperTable.
OBJECT-TYPE    
  MscVrPpTbclOperEntry  

mscVrPpTbclPortName 1.3.6.1.4.1.562.36.2.1.100.3.2.16.1.1
The attribute portName is a string of the form 'BridgePortName-i', where BridgePortName is the abbreviation of the corresponding bridge port and i is the instance identifier of the ProtocolPort, the bridge port is provisioned under. For example a TransparentBridgePort provisioned under ProtocolPort/myport would have a name TBP-myport.
OBJECT-TYPE    
  AsciiString SIZE(4..29)  

mscVrPpTbclUpTime 1.3.6.1.4.1.562.36.2.1.100.3.2.16.1.3
This attribute specifies the accumulated up time of this bridge port since the last reset occurred.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpTbclDownTime 1.3.6.1.4.1.562.36.2.1.100.3.2.16.1.4
This attribute specifies the accumulated down time of this bridge port since the last reset occurred.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpTbclBridgingMode 1.3.6.1.4.1.562.36.2.1.100.3.2.16.1.5
This attribute specifies the mode of bridging this port can support. It in turn implies the format of frames, this bridge port can process and forward.
OBJECT-TYPE    
  INTEGER unknown(1), tb(2), sr(3), srt(4)  

mscVrPpTbclBridgePortConfig 1.3.6.1.4.1.562.36.2.1.100.3.2.16.1.6
This attribute specifies the bridge port's configuration. It indicates if the bridge port is operating as an access port or as a backbone port. An access bridge port does not encapsulate a MAC frame and does not preserve domain information in the encapsulation, whereas a backbone bridge port encapsulates the MAC frame and optionally preserves domain information in the encapsulated frame.A backbone bridge port is typically used to transport frames across a high bandwidth backbone network to another bridge unit for further processing/forwarding of the frame.
OBJECT-TYPE    
  INTEGER access(1), backbone(2)  

mscVrPpTbclBridgePortType 1.3.6.1.4.1.562.36.2.1.100.3.2.16.1.7
This attribute specifies the type of bridge port that was provisioned. It takes into consideration the bridgingMode, bridgePortConfig and the media the bridge port is linked to before branding a bridge port.
OBJECT-TYPE    
  INTEGER ethernetBridgePort(0), tokenRingBridgePort(1), fddiBridgePort(2), tokenBusBridgePort(3), fddiEncapsulatingBridgePort(4), vnsBridgePort(5), frameRelayBridgePort(6), pppBridgePort(7), smdsBridgePort(8), vcpBridgePort(9), x25BridgePort(10), srEncapSrBridgePort(11), srEncapTbBridgePort(12), sourceGateSrBridgePort(13), sourceGateTbBridgePort(14), srtbBridgePort(15), tbsrBridgePort(16), clusterSrBridgePort(17), clusterTbBridgePort(18), unknown(19), atmMpeBridgePort(20), snaDlrBridgePort(21), lanEmulationClientEthernet(22)  

mscVrPpTbclIfIndex 1.3.6.1.4.1.562.36.2.1.100.3.2.16.1.8
This attribute specifies the index into the Interface Table where in information about the media interface corresponding to the bridge port is maintained.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscVrPpTbclDelayExceededDiscards 1.3.6.1.4.1.562.36.2.1.100.3.2.16.1.10
This attribute is indicative of the number of frames that were discarded because the time taken to process these frames exceeded the transit delay allowed for this bridge unit. This attribute is not supported by bridging and will always have a value of 0.
OBJECT-TYPE    
  Counter32  

mscVrPpTbclMtuExceededDiscards 1.3.6.1.4.1.562.36.2.1.100.3.2.16.1.11
This attribute is indicative of the number of frames discarded because the size of the out bound frame exceeded the message transfer unit (mtu) allowed for the bridge port. Note that this counter only refers to the outbound frames for this bridge port. This counter wraps around its maximum value of 4294967295. This counter is influenced by the attribute fragmentIp. This counter is incremented when the a frame larger than the mtu allowed is encountered and cannot be fragmented. If this counter is increasing steadily, it might be useful to set the value of the attribute fragmentIp to a value of on.
OBJECT-TYPE    
  Counter32  

mscVrPpTbclTbOperTable 1.3.6.1.4.1.562.36.2.1.100.3.2.17
This group houses all the port specific operational attributes that belong to the Tb group. This group also houses all the port specific statistical attributes that belong to the Tb group. The Tb group is only applicable bridge port types that operate in the TB mode. These attributes reflect the state of a bridge port operating in the TB mode
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbclTbOperEntry

mscVrPpTbclTbOperEntry 1.3.6.1.4.1.562.36.2.1.100.3.2.17.1
An entry in the mscVrPpTbclTbOperTable.
OBJECT-TYPE    
  MscVrPpTbclTbOperEntry  

mscVrPpTbclMaxInfo 1.3.6.1.4.1.562.36.2.1.100.3.2.17.1.2
This attribute specifies the maximum size of the information field in a TB frame. This excludes the header field.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpTbclBadVerifyDiscards 1.3.6.1.4.1.562.36.2.1.100.3.2.17.1.3
This attribute is indicative of the number of incoming frames that were discarded because: a) the value of the secureOption attribute was set to on and b) it is not allowed to receive frames originating from the mac address found in the source address field of the frame (source mac address look up in the forwarding table failed.) on this bridge port. c) for the destination mac address found in the frame, the port the frame was received on does not appear as in port in the corresponding static table entry. Permission to receive frames from a mac address is granted via the static table entries. This attribute, badVerifyDiscards, is directly influenced by: 1. secureOption and 2. the static table entries. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbclUnicastNoMatches 1.3.6.1.4.1.562.36.2.1.100.3.2.17.1.4
This attribute is indicative of the number frames discarded because the MAC address found in the destination field did not match the local MAC address of the bridge port. This counter is only applicable for the protocols that are being routed currently.This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbclStaticEntryDiscards 1.3.6.1.4.1.562.36.2.1.100.3.2.17.1.5
This attribute is indicative of the number of frames that were discarded because of the following two reasons: a) there was no entry for the 'allowed to go' field in the static table entry, where the input port is this bridge port. b) for spanning tree bpdus that are locally processed. This counter wraps around its maximum value of 4294967295. It might prove useful to check the static table entry corresponding to the bridge port in question, if this counter consistently displays a high value. Ideally this counter should be as low as possible.
OBJECT-TYPE    
  Counter32  

mscVrPpTbclDynamicEntryDiscards 1.3.6.1.4.1.562.36.2.1.100.3.2.17.1.6
This attribute is indicative of the number of incoming frames that a) were discarded because of the fact that the bridge port, the frame is to go out of matches the bridge port it came in from or b) if the stp port state of the out port is not forwarding. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbclLearningDiscards 1.3.6.1.4.1.562.36.2.1.100.3.2.17.1.7
This attribute is indicative of the number of frames that were discarded while this bridge port was in a state other than the forwarding state. While in learning state the frame is discarded after the information from its header is learnt. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbclInDiscards 1.3.6.1.4.1.562.36.2.1.100.3.2.17.1.8
This attribute is indicative of the number of frames that were received by this bridge port and were discarded by the forwarding process. This includes frames that could have been discarded due to filtering. A repidly increasing value for this attribute could indicate a shrtage of resource in terms of memory needed to process the incoming frames. More memory can be provisioned through the VirtualRouter's memory manager.
OBJECT-TYPE    
  Counter32  

mscVrPpTbclInFrames 1.3.6.1.4.1.562.36.2.1.100.3.2.17.1.9
This attribute is indicative of the number of frames that have been received by this port from its segment. Note that a frame received on this bridge port is counted if and only if it can be processed by the bridge logic contained in this bridge unit, a protocol that can be processed by the bridge logic. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbclOutFrames 1.3.6.1.4.1.562.36.2.1.100.3.2.17.1.10
This attribute is indicative of the number of frames that have been transmitted out this bridge port. Note that frame transmitted out this bridge port is counted if and only if it is for a protocol being processed by the bridge unit. This also includes management frames.This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbclStpOperTable 1.3.6.1.4.1.562.36.2.1.100.3.2.18
This group houses all the port specific operational attributes that belong to the Stp group. The Stp group is applicable to all the bridge ports that participate in the spanning tree protocol. These attributes reflect the state of the bridge port's participation in the spanning tree protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbclStpOperEntry

mscVrPpTbclStpOperEntry 1.3.6.1.4.1.562.36.2.1.100.3.2.18.1
An entry in the mscVrPpTbclStpOperTable.
OBJECT-TYPE    
  MscVrPpTbclStpOperEntry  

mscVrPpTbclStpPortState 1.3.6.1.4.1.562.36.2.1.100.3.2.18.1.2
This attribute specifies the spanning tree protocol state of the bridge port.
OBJECT-TYPE    
  INTEGER disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6)  

mscVrPpTbclStpTypeOper 1.3.6.1.4.1.562.36.2.1.100.3.2.18.1.3
This attribute specifies the type of spanning tree protocol the port is participating in. A bridge port could participate in either the ieee8021 spanning tree protocol or the dec spanning tree protocol.
OBJECT-TYPE    
  INTEGER none(0), dec(2), ieee8021(3)  

mscVrPpTbclDesignatedCost 1.3.6.1.4.1.562.36.2.1.100.3.2.18.1.4
This attribute specifies the path cost of the designated port of the lan segment connected to the port.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpTbclPathCostOper 1.3.6.1.4.1.562.36.2.1.100.3.2.18.1.5
This attribute specifies the contribution of this port, to all the paths to the root bridge that include this port. This attribute pathCostOper will track the value of the attribute pathCostProv when the value of the attribute pathCostMethod is set of off.
OBJECT-TYPE    
  Unsigned32 1..65535  

mscVrPpTbclDesignatedBridge 1.3.6.1.4.1.562.36.2.1.100.3.2.18.1.6
This attribute specifies the identifier of the bridge that this port considers to be the designated bridge.
OBJECT-TYPE    
  BridgeId SIZE(8)  

mscVrPpTbclDesignatedPort 1.3.6.1.4.1.562.36.2.1.100.3.2.18.1.7
This attribute specifies the port identifier of the port on the designated bridge, attached to the same lan as this port is attached to.
OBJECT-TYPE    
  Hex 0..65535  

mscVrPpTbclForwardTransitions 1.3.6.1.4.1.562.36.2.1.100.3.2.18.1.8
This attribute is indicative of the number of times this bridge port transitioned from the learning state to the forwarding state. This counter wraps around its maximum value of 4294967295. A rapidly increasing value might be indicative of an unstable spanning tree topology.
OBJECT-TYPE    
  Counter32  

mscVrPpTbclBlockingDiscards 1.3.6.1.4.1.562.36.2.1.100.3.2.18.1.9
This attribute is indicative of the number of incoming frames that were discarded because the bridge port was in the blocking state. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbclDesignatedRoot 1.3.6.1.4.1.562.36.2.1.100.3.2.18.1.10
This attribute specifies the bridge identifier of the bridge recorded as the root bridge, in the configuration BPDUs sent out by the designated bridge on the segment to which the port is attached.
OBJECT-TYPE    
  BridgeId SIZE(8)  

mscVrPpTbclStatsTable 1.3.6.1.4.1.562.36.2.1.100.3.2.19
This group houses all the statistical attributes applicable to all types of bridge ports and represents the common factor between them. These attributes in part reflect the state of the bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbclStatsEntry

mscVrPpTbclStatsEntry 1.3.6.1.4.1.562.36.2.1.100.3.2.19.1
An entry in the mscVrPpTbclStatsTable.
OBJECT-TYPE    
  MscVrPpTbclStatsEntry  

mscVrPpTbclBadAbstractDiscards 1.3.6.1.4.1.562.36.2.1.100.3.2.19.1.1
This attribute is indicative of the number of frames that were discarded because the data that was abstracted, from frames coming in through this bridge port, did not conform to the format expected by the bridge logic.This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbclTinygramFramesIn 1.3.6.1.4.1.562.36.2.1.100.3.2.19.1.2
This attribute is indicative of the number of frames received on this bridge port that used the tinygram compression scheme.
OBJECT-TYPE    
  Counter32  

mscVrPpTbclTinygramFramesOut 1.3.6.1.4.1.562.36.2.1.100.3.2.19.1.3
This attribute is indicative of the number of frames transmitted out this bridge port that used the tinygram compression scheme.
OBJECT-TYPE    
  Counter32  

mscVrPpTbclInFilterDiscards 1.3.6.1.4.1.562.36.2.1.100.3.2.19.1.4
This attribute is indicative of the number of frames discarded at the in filter point. This includes a) frames discarded due to application of the filter defined with PCF for the in filter point and b) the frames discarded due to domain based filtering at the in filter point. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbclOutFilterDiscards 1.3.6.1.4.1.562.36.2.1.100.3.2.19.1.5
This attribute is indicative of the number of frames discarded at the out filter point. This includes: a) frames discarded due to application of the filter defined with PCF for the out filter point and b) the frames discarded due to domain based filtering at the out filter point. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpFddiETB 1.3.6.1.4.1.562.36.2.1.100.3.3
OBJECT IDENTIFIER    

mscVrPpFddiETBRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.3.3.1
This entry controls the addition and deletion of mscVrPpFddiETB components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpFddiETBRowStatusEntry

mscVrPpFddiETBRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.3.3.1.1
A single entry in the table represents a single mscVrPpFddiETB component.
OBJECT-TYPE    
  MscVrPpFddiETBRowStatusEntry  

mscVrPpFddiETBRowStatus 1.3.6.1.4.1.562.36.2.1.100.3.3.1.1.1
This variable is used as the basis for SNMP naming of mscVrPpFddiETB components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscVrPpFddiETBComponentName 1.3.6.1.4.1.562.36.2.1.100.3.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscVrPpFddiETBStorageType 1.3.6.1.4.1.562.36.2.1.100.3.3.1.1.4
This variable represents the storage type value for the mscVrPpFddiETB tables.
OBJECT-TYPE    
  StorageType  

mscVrPpFddiETBIndex 1.3.6.1.4.1.562.36.2.1.100.3.3.1.1.10
This variable represents the index for the mscVrPpFddiETB tables.
OBJECT-TYPE    
  NonReplicated  

mscVrPpFddiETBNs 1.3.6.1.4.1.562.36.2.1.100.3.3.2
OBJECT IDENTIFIER    

mscVrPpFddiETBNsRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.3.3.2.1
This entry controls the addition and deletion of mscVrPpFddiETBNs components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpFddiETBNsRowStatusEntry

mscVrPpFddiETBNsRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.3.3.2.1.1
A single entry in the table represents a single mscVrPpFddiETBNs component.
OBJECT-TYPE    
  MscVrPpFddiETBNsRowStatusEntry  

mscVrPpFddiETBNsRowStatus 1.3.6.1.4.1.562.36.2.1.100.3.3.2.1.1.1
This variable is used as the basis for SNMP naming of mscVrPpFddiETBNs components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscVrPpFddiETBNsComponentName 1.3.6.1.4.1.562.36.2.1.100.3.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscVrPpFddiETBNsStorageType 1.3.6.1.4.1.562.36.2.1.100.3.3.2.1.1.4
This variable represents the storage type value for the mscVrPpFddiETBNs tables.
OBJECT-TYPE    
  StorageType  

mscVrPpFddiETBNsIndex 1.3.6.1.4.1.562.36.2.1.100.3.3.2.1.1.10
This variable represents the index for the mscVrPpFddiETBNs tables.
OBJECT-TYPE    
  NonReplicated  

mscVrPpFddiETBNsProvTable 1.3.6.1.4.1.562.36.2.1.100.3.3.2.10
This group houses all the port specific provisionable attributes associated with Ns. These attributes influence the application of filters to incoming and outgoing frames.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpFddiETBNsProvEntry

mscVrPpFddiETBNsProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.3.2.10.1
An entry in the mscVrPpFddiETBNsProvTable.
OBJECT-TYPE    
  MscVrPpFddiETBNsProvEntry  

mscVrPpFddiETBNsIncomingFilter 1.3.6.1.4.1.562.36.2.1.100.3.3.2.10.1.2
This attribute specifies the name of the filter to be applied at the incoming filter point.
OBJECT-TYPE    
  AsciiString SIZE(0..32)  

mscVrPpFddiETBNsOutgoingFilter 1.3.6.1.4.1.562.36.2.1.100.3.3.2.10.1.3
This attribute specifies the name of the filter to be applied at the out going filter point.
OBJECT-TYPE    
  AsciiString SIZE(0..32)  

mscVrPpFddiETBProvTable 1.3.6.1.4.1.562.36.2.1.100.3.3.10
This group houses all the provisionable attributes that belong to the this group. This group of attributes is applicable to all types of bridge ports and represent the common factor between them. These attributes influence the working of a bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpFddiETBProvEntry

mscVrPpFddiETBProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.3.10.1
An entry in the mscVrPpFddiETBProvTable.
OBJECT-TYPE    
  MscVrPpFddiETBProvEntry  

mscVrPpFddiETBTranslateIpx 1.3.6.1.4.1.562.36.2.1.100.3.3.10.1.1
This attribute specifies the type of translation to be performed on frames carrying IPX packets. Ethernet frames carrying IPX payload could be translated to IEEE 802.3 frames (with the same IPX payload) or vice- versa. The main reason to do so is to allow the bridge unit to consistently forward one type of frames carrying IPX packets. Translations can be turned off altogether in which case the IPX frames will pass through the bridge unit unchanged.
OBJECT-TYPE    
  INTEGER off(0), ieee8023(1), ethernet(2), snap(3), sap(4)  

mscVrPpFddiETBFragmentIp 1.3.6.1.4.1.562.36.2.1.100.3.3.10.1.2
This attribute specifies if or not outbound frames carrying IP datagrams should be fragmented to conform to message transfer unit (mtu) sizes dictated by the media.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpFddiETBServiceClass 1.3.6.1.4.1.562.36.2.1.100.3.3.10.1.3
This attribute specifies if the frames should be ordered or not before they are transmitted through a bridge port. If this attribute has a value of ordered the received frames are ordered as in the original message, before they are transmitted out through a bridge port. If it has a value of notOrdered, received then frames pass through the bridge unit in the order they are received. This feature can be used over multiple telecommunication links to increase data flow. Please note that this attribute only affects link protocols and is ineffective with lan media.
OBJECT-TYPE    
  INTEGER ordered(0), notOrdered(1)  

mscVrPpFddiETBConvertArpMacAddress 1.3.6.1.4.1.562.36.2.1.100.3.3.10.1.4
This attribute is indicative of the state of the MAC address format conversion process for ARP/RARP frames. The MAC addresses may be translated if need be from a canonical format to a non-canonical format, based on the needs of the associated media. If this attribute is set to a value of on then all Mac addresses will converted if need be to suit the format of mac address, the outgoing media will support. If this attribute is set to a value of off no such conversion takes place.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpFddiETBPortNum 1.3.6.1.4.1.562.36.2.1.100.3.3.10.1.5
This attribute is indicative of the unique number assigned to the bridge port. It is used for SNMP management of this bridge port and in spanning tree as an identifier this bridge port. Notes regarding portNum: Escape routines exist for initializing, copying, and deleting port numbers. This is necessary because SNMP requires a unique port instance identifier. The initPortNum escape routine sets the port number to a value in the range 1-255 for this purpose. The setCopiedPortNum escape routine exists to maintain the uniqueness of the port number in cases when one port is copied to another. When a bridge port is deleted, the releasePortNum escape routine places the port number being released into a pending deletion state. This is because the port number cannot be re-allocated until the port is truely deleted in the current view. This is necessary since there is no guarantee of order when processing changes to multiple protocol ports so without the pending deletion state, the same port number could be temporarily assigned to two ports for a short period of time. The portNum is set as component critical since bridging also uses the port number as a key for indexing into its data structures. If a port is deleted then re-added under the same protocol port, CAS treats the change as a SET to the portNum attribute.
OBJECT-TYPE    
  Unsigned32 0..255  

mscVrPpFddiETBTbProvTable 1.3.6.1.4.1.562.36.2.1.100.3.3.11
This group houses all the port specific provisionable attributes that belong to the Tb group. The Tb group is only applicable bridge port types that operate in the TB mode. These attributes in part influence the working of a bridge port operating in the TB mode.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpFddiETBTbProvEntry

mscVrPpFddiETBTbProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.3.11.1
An entry in the mscVrPpFddiETBTbProvTable.
OBJECT-TYPE    
  MscVrPpFddiETBTbProvEntry  

mscVrPpFddiETBSecureOption 1.3.6.1.4.1.562.36.2.1.100.3.3.11.1.1
This attribute specifies whether the port secure feature is enabled. The secure feature, if enabled causes the following things to happen: a) disallows dynamic learning, b) disallows frames to be forwarded that do not satisfy the following condition: the mac address of the source should be found in the forwarding table and the destination mac address of the frame should also be found in the forwarding table. In addition to this, the port the frame was received on should figure as the in port, given the destination mac address found in the frame. c) disallows frames to be forwarded if the allowed to go port map for the destination mac address is empty. This feature in effect allows the user to choose the hosts that can generate traffic and the hosts that can receive traffic through this bridge unit.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscVrPpFddiETBStpProvTable 1.3.6.1.4.1.562.36.2.1.100.3.3.12
This group houses all the port specific provisionable attributes that belong to the Stp group. The Stp group is applicable to all the bridge ports that participate in the spanning tree protocol. These attributes influence the participation of the bridge port in the spanning tree protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpFddiETBStpProvEntry

mscVrPpFddiETBStpProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.3.12.1
An entry in the mscVrPpFddiETBStpProvTable.
OBJECT-TYPE    
  MscVrPpFddiETBStpProvEntry  

mscVrPpFddiETBAdminStatus 1.3.6.1.4.1.562.36.2.1.100.3.3.12.1.1
This attribute defines the current administrative state for this component. enabled indicates that the component is available for operation. disabled indicates the component is unavailable for operation.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mscVrPpFddiETBPortStateStpControl 1.3.6.1.4.1.562.36.2.1.100.3.3.12.1.2
This attribute specifies whether or not spanning tree protocol state for this bridge port is controlled by the spanning tree protocol. In essence it indicates the participation of this bridge port in the spanning tree protocol, by accepting and acting on received bridge protocol data units and by sending out the same. on signifies that this bridge port's spanning tree port state is controlled by the spanning tree protocol. A value of off signifies that the spanning tree port state of this bridge port is unaffected by the spanning tree protocol. This in effect puts the bridge port out of reach of the spanning tree protocol and in the forwarding state. Care should be taken while assigning a value of off to this attribute, as this might cause network loops. Please do not set this attribute to off unless you are absolutely sure about the effect of such an action on your network topology.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpFddiETBStpTypeProv 1.3.6.1.4.1.562.36.2.1.100.3.3.12.1.3
This attribute specifies the type of spanning tree protocol the port is participating in. A bridge port could participate in either the ieee8021 spanning tree protocol or the dec spanning tree protocol. If the value of the attribute protocolSpec in the SpanningTreeProtocol component, provisioned under the TransparentBridge component is in conflict with the value of this attribute, the value of the protocolSpec attribute will prevail. Prevailing stp type is reflected in the value of the attribute stpTypeOper.
OBJECT-TYPE    
  INTEGER dec(2), ieee8021(3)  

mscVrPpFddiETBPortPriority 1.3.6.1.4.1.562.36.2.1.100.3.3.12.1.4
This attribute specifies the value for port priority, which is contained in the first octet of the port identifier. Valid values are as follows: 1) 0..255 for stp type DEC and 2) 0..65535 for stp type IEEE.
OBJECT-TYPE    
  Unsigned32 0..65535  

mscVrPpFddiETBPathCost 1.3.6.1.4.1.562.36.2.1.100.3.3.12.1.5
This attribute specifies the contribution of this port, to all the paths to the root bridge that include this port. Please note that the value of the attribute pathCostMethod is applied only when the value of the attribute pathCostMethod is set to on and is ignored if otherwise.
OBJECT-TYPE    
  Unsigned32 1..65535  

mscVrPpFddiETBPathCostMethod 1.3.6.1.4.1.562.36.2.1.100.3.3.12.1.6
This attribute specifies the method used by the bridging logic, to calculate the path cost to the bridge considered to be the root bridge in the spanning tree topology. This attribute should be set to off before attempting to provision a value for pathCostProv.
OBJECT-TYPE    
  INTEGER off(1), dec(2), ieee8021(3)  

mscVrPpFddiETBDIProvTable 1.3.6.1.4.1.562.36.2.1.100.3.3.13
This group houses all the provisionable, domain specific attributes for a non-encapsulating bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpFddiETBDIProvEntry

mscVrPpFddiETBDIProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.3.13.1
An entry in the mscVrPpFddiETBDIProvTable.
OBJECT-TYPE    
  MscVrPpFddiETBDIProvEntry  

mscVrPpFddiETBDomainNum 1.3.6.1.4.1.562.36.2.1.100.3.3.13.1.1
This attribute specifies the domain number associated with this bridge port. Domain numbers are used for confining frames to a domain. Domain based filtering provides a complete segregation of traffic based on domain number associated with frames. There can exist only sixteen domains when a spanning tree is desired specific to each domain. When there is only a single spanning tree spanning all the domains the maximum number of domains possible are 4294967293. This attribute is of no relevance when associated with backbone bridge port. Its value is ignored in such a situation.
OBJECT-TYPE    
  Unsigned32 1..4294967293  

mscVrPpFddiETBPreserveDomain 1.3.6.1.4.1.562.36.2.1.100.3.3.13.1.2
This attribute specifies if the domain information should be preserved or embedded in the frame header. This attribute applies only to backbone ports and does not affect the access bridge ports. By setting this attribute to a value of on, domain information could be preserved in frames being tunnelled across the a backbone, so that this information can be deciphered at the other end of the backbone tunnel. This preserves the integrity of the domains thus preventing domain breaches while tunnelling frames across backbone network. If the value of this attribute is set to off then domain information is not preserved in the header of the frames tunnelling through the backbone. This eliminates the overhead incurred to preserve domain information across the backbone while tunnelling frames across it. Preserve domain is relevant when used in conjunction with the following media: FDDI, ATM MPE, Frame Relay and PPP. It is ignored when used with other types of media.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpFddiETBStateTable 1.3.6.1.4.1.562.36.2.1.100.3.3.14
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpFddiETBStateEntry

mscVrPpFddiETBStateEntry 1.3.6.1.4.1.562.36.2.1.100.3.3.14.1
An entry in the mscVrPpFddiETBStateTable.
OBJECT-TYPE    
  MscVrPpFddiETBStateEntry  

mscVrPpFddiETBAdminState 1.3.6.1.4.1.562.36.2.1.100.3.3.14.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscVrPpFddiETBOperationalState 1.3.6.1.4.1.562.36.2.1.100.3.3.14.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscVrPpFddiETBUsageState 1.3.6.1.4.1.562.36.2.1.100.3.3.14.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscVrPpFddiETBOperStatusTable 1.3.6.1.4.1.562.36.2.1.100.3.3.15
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpFddiETBOperStatusEntry

mscVrPpFddiETBOperStatusEntry 1.3.6.1.4.1.562.36.2.1.100.3.3.15.1
An entry in the mscVrPpFddiETBOperStatusTable.
OBJECT-TYPE    
  MscVrPpFddiETBOperStatusEntry  

mscVrPpFddiETBSnmpOperStatus 1.3.6.1.4.1.562.36.2.1.100.3.3.15.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscVrPpFddiETBOperTable 1.3.6.1.4.1.562.36.2.1.100.3.3.16
This group houses all the operational attributes belonging to the base group. The base group of attributes is applicable to all types of bridge ports and represent the common factor between them. These attributes in part, reflect the state of a bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpFddiETBOperEntry

mscVrPpFddiETBOperEntry 1.3.6.1.4.1.562.36.2.1.100.3.3.16.1
An entry in the mscVrPpFddiETBOperTable.
OBJECT-TYPE    
  MscVrPpFddiETBOperEntry  

mscVrPpFddiETBPortName 1.3.6.1.4.1.562.36.2.1.100.3.3.16.1.1
The attribute portName is a string of the form 'BridgePortName-i', where BridgePortName is the abbreviation of the corresponding bridge port and i is the instance identifier of the ProtocolPort, the bridge port is provisioned under. For example a TransparentBridgePort provisioned under ProtocolPort/myport would have a name TBP-myport.
OBJECT-TYPE    
  AsciiString SIZE(4..29)  

mscVrPpFddiETBUpTime 1.3.6.1.4.1.562.36.2.1.100.3.3.16.1.3
This attribute specifies the accumulated up time of this bridge port since the last reset occurred.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpFddiETBDownTime 1.3.6.1.4.1.562.36.2.1.100.3.3.16.1.4
This attribute specifies the accumulated down time of this bridge port since the last reset occurred.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpFddiETBBridgingMode 1.3.6.1.4.1.562.36.2.1.100.3.3.16.1.5
This attribute specifies the mode of bridging this port can support. It in turn implies the format of frames, this bridge port can process and forward.
OBJECT-TYPE    
  INTEGER unknown(1), tb(2), sr(3), srt(4)  

mscVrPpFddiETBBridgePortConfig 1.3.6.1.4.1.562.36.2.1.100.3.3.16.1.6
This attribute specifies the bridge port's configuration. It indicates if the bridge port is operating as an access port or as a backbone port. An access bridge port does not encapsulate a MAC frame and does not preserve domain information in the encapsulation, whereas a backbone bridge port encapsulates the MAC frame and optionally preserves domain information in the encapsulated frame.A backbone bridge port is typically used to transport frames across a high bandwidth backbone network to another bridge unit for further processing/forwarding of the frame.
OBJECT-TYPE    
  INTEGER access(1), backbone(2)  

mscVrPpFddiETBBridgePortType 1.3.6.1.4.1.562.36.2.1.100.3.3.16.1.7
This attribute specifies the type of bridge port that was provisioned. It takes into consideration the bridgingMode, bridgePortConfig and the media the bridge port is linked to before branding a bridge port.
OBJECT-TYPE    
  INTEGER ethernetBridgePort(0), tokenRingBridgePort(1), fddiBridgePort(2), tokenBusBridgePort(3), fddiEncapsulatingBridgePort(4), vnsBridgePort(5), frameRelayBridgePort(6), pppBridgePort(7), smdsBridgePort(8), vcpBridgePort(9), x25BridgePort(10), srEncapSrBridgePort(11), srEncapTbBridgePort(12), sourceGateSrBridgePort(13), sourceGateTbBridgePort(14), srtbBridgePort(15), tbsrBridgePort(16), clusterSrBridgePort(17), clusterTbBridgePort(18), unknown(19), atmMpeBridgePort(20), snaDlrBridgePort(21), lanEmulationClientEthernet(22)  

mscVrPpFddiETBIfIndex 1.3.6.1.4.1.562.36.2.1.100.3.3.16.1.8
This attribute specifies the index into the Interface Table where in information about the media interface corresponding to the bridge port is maintained.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscVrPpFddiETBDelayExceededDiscards 1.3.6.1.4.1.562.36.2.1.100.3.3.16.1.10
This attribute is indicative of the number of frames that were discarded because the time taken to process these frames exceeded the transit delay allowed for this bridge unit. This attribute is not supported by bridging and will always have a value of 0.
OBJECT-TYPE    
  Counter32  

mscVrPpFddiETBMtuExceededDiscards 1.3.6.1.4.1.562.36.2.1.100.3.3.16.1.11
This attribute is indicative of the number of frames discarded because the size of the out bound frame exceeded the message transfer unit (mtu) allowed for the bridge port. Note that this counter only refers to the outbound frames for this bridge port. This counter wraps around its maximum value of 4294967295. This counter is influenced by the attribute fragmentIp. This counter is incremented when the a frame larger than the mtu allowed is encountered and cannot be fragmented. If this counter is increasing steadily, it might be useful to set the value of the attribute fragmentIp to a value of on.
OBJECT-TYPE    
  Counter32  

mscVrPpFddiETBTbOperTable 1.3.6.1.4.1.562.36.2.1.100.3.3.17
This group houses all the port specific operational attributes that belong to the Tb group. This group also houses all the port specific statistical attributes that belong to the Tb group. The Tb group is only applicable bridge port types that operate in the TB mode. These attributes reflect the state of a bridge port operating in the TB mode
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpFddiETBTbOperEntry

mscVrPpFddiETBTbOperEntry 1.3.6.1.4.1.562.36.2.1.100.3.3.17.1
An entry in the mscVrPpFddiETBTbOperTable.
OBJECT-TYPE    
  MscVrPpFddiETBTbOperEntry  

mscVrPpFddiETBMaxInfo 1.3.6.1.4.1.562.36.2.1.100.3.3.17.1.2
This attribute specifies the maximum size of the information field in a TB frame. This excludes the header field.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpFddiETBBadVerifyDiscards 1.3.6.1.4.1.562.36.2.1.100.3.3.17.1.3
This attribute is indicative of the number of incoming frames that were discarded because: a) the value of the secureOption attribute was set to on and b) it is not allowed to receive frames originating from the mac address found in the source address field of the frame (source mac address look up in the forwarding table failed.) on this bridge port. c) for the destination mac address found in the frame, the port the frame was received on does not appear as in port in the corresponding static table entry. Permission to receive frames from a mac address is granted via the static table entries. This attribute, badVerifyDiscards, is directly influenced by: 1. secureOption and 2. the static table entries. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpFddiETBUnicastNoMatches 1.3.6.1.4.1.562.36.2.1.100.3.3.17.1.4
This attribute is indicative of the number frames discarded because the MAC address found in the destination field did not match the local MAC address of the bridge port. This counter is only applicable for the protocols that are being routed currently.This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpFddiETBStaticEntryDiscards 1.3.6.1.4.1.562.36.2.1.100.3.3.17.1.5
This attribute is indicative of the number of frames that were discarded because of the following two reasons: a) there was no entry for the 'allowed to go' field in the static table entry, where the input port is this bridge port. b) for spanning tree bpdus that are locally processed. This counter wraps around its maximum value of 4294967295. It might prove useful to check the static table entry corresponding to the bridge port in question, if this counter consistently displays a high value. Ideally this counter should be as low as possible.
OBJECT-TYPE    
  Counter32  

mscVrPpFddiETBDynamicEntryDiscards 1.3.6.1.4.1.562.36.2.1.100.3.3.17.1.6
This attribute is indicative of the number of incoming frames that a) were discarded because of the fact that the bridge port, the frame is to go out of matches the bridge port it came in from or b) if the stp port state of the out port is not forwarding. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpFddiETBLearningDiscards 1.3.6.1.4.1.562.36.2.1.100.3.3.17.1.7
This attribute is indicative of the number of frames that were discarded while this bridge port was in a state other than the forwarding state. While in learning state the frame is discarded after the information from its header is learnt. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpFddiETBInDiscards 1.3.6.1.4.1.562.36.2.1.100.3.3.17.1.8
This attribute is indicative of the number of frames that were received by this bridge port and were discarded by the forwarding process. This includes frames that could have been discarded due to filtering. A repidly increasing value for this attribute could indicate a shrtage of resource in terms of memory needed to process the incoming frames. More memory can be provisioned through the VirtualRouter's memory manager.
OBJECT-TYPE    
  Counter32  

mscVrPpFddiETBInFrames 1.3.6.1.4.1.562.36.2.1.100.3.3.17.1.9
This attribute is indicative of the number of frames that have been received by this port from its segment. Note that a frame received on this bridge port is counted if and only if it can be processed by the bridge logic contained in this bridge unit, a protocol that can be processed by the bridge logic. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpFddiETBOutFrames 1.3.6.1.4.1.562.36.2.1.100.3.3.17.1.10
This attribute is indicative of the number of frames that have been transmitted out this bridge port. Note that frame transmitted out this bridge port is counted if and only if it is for a protocol being processed by the bridge unit. This also includes management frames.This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpFddiETBStpOperTable 1.3.6.1.4.1.562.36.2.1.100.3.3.18
This group houses all the port specific operational attributes that belong to the Stp group. The Stp group is applicable to all the bridge ports that participate in the spanning tree protocol. These attributes reflect the state of the bridge port's participation in the spanning tree protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpFddiETBStpOperEntry

mscVrPpFddiETBStpOperEntry 1.3.6.1.4.1.562.36.2.1.100.3.3.18.1
An entry in the mscVrPpFddiETBStpOperTable.
OBJECT-TYPE    
  MscVrPpFddiETBStpOperEntry  

mscVrPpFddiETBStpPortState 1.3.6.1.4.1.562.36.2.1.100.3.3.18.1.2
This attribute specifies the spanning tree protocol state of the bridge port.
OBJECT-TYPE    
  INTEGER disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6)  

mscVrPpFddiETBStpTypeOper 1.3.6.1.4.1.562.36.2.1.100.3.3.18.1.3
This attribute specifies the type of spanning tree protocol the port is participating in. A bridge port could participate in either the ieee8021 spanning tree protocol or the dec spanning tree protocol.
OBJECT-TYPE    
  INTEGER none(0), dec(2), ieee8021(3)  

mscVrPpFddiETBDesignatedCost 1.3.6.1.4.1.562.36.2.1.100.3.3.18.1.4
This attribute specifies the path cost of the designated port of the lan segment connected to the port.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpFddiETBPathCostOper 1.3.6.1.4.1.562.36.2.1.100.3.3.18.1.5
This attribute specifies the contribution of this port, to all the paths to the root bridge that include this port. This attribute pathCostOper will track the value of the attribute pathCostProv when the value of the attribute pathCostMethod is set of off.
OBJECT-TYPE    
  Unsigned32 1..65535  

mscVrPpFddiETBDesignatedBridge 1.3.6.1.4.1.562.36.2.1.100.3.3.18.1.6
This attribute specifies the identifier of the bridge that this port considers to be the designated bridge.
OBJECT-TYPE    
  BridgeId SIZE(8)  

mscVrPpFddiETBDesignatedPort 1.3.6.1.4.1.562.36.2.1.100.3.3.18.1.7
This attribute specifies the port identifier of the port on the designated bridge, attached to the same lan as this port is attached to.
OBJECT-TYPE    
  Hex 0..65535  

mscVrPpFddiETBForwardTransitions 1.3.6.1.4.1.562.36.2.1.100.3.3.18.1.8
This attribute is indicative of the number of times this bridge port transitioned from the learning state to the forwarding state. This counter wraps around its maximum value of 4294967295. A rapidly increasing value might be indicative of an unstable spanning tree topology.
OBJECT-TYPE    
  Counter32  

mscVrPpFddiETBBlockingDiscards 1.3.6.1.4.1.562.36.2.1.100.3.3.18.1.9
This attribute is indicative of the number of incoming frames that were discarded because the bridge port was in the blocking state. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpFddiETBDesignatedRoot 1.3.6.1.4.1.562.36.2.1.100.3.3.18.1.10
This attribute specifies the bridge identifier of the bridge recorded as the root bridge, in the configuration BPDUs sent out by the designated bridge on the segment to which the port is attached.
OBJECT-TYPE    
  BridgeId SIZE(8)  

mscVrPpFddiETBStatsTable 1.3.6.1.4.1.562.36.2.1.100.3.3.19
This group houses all the statistical attributes applicable to all types of bridge ports and represents the common factor between them. These attributes in part reflect the state of the bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpFddiETBStatsEntry

mscVrPpFddiETBStatsEntry 1.3.6.1.4.1.562.36.2.1.100.3.3.19.1
An entry in the mscVrPpFddiETBStatsTable.
OBJECT-TYPE    
  MscVrPpFddiETBStatsEntry  

mscVrPpFddiETBBadAbstractDiscards 1.3.6.1.4.1.562.36.2.1.100.3.3.19.1.1
This attribute is indicative of the number of frames that were discarded because the data that was abstracted, from frames coming in through this bridge port, did not conform to the format expected by the bridge logic.This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpFddiETBTinygramFramesIn 1.3.6.1.4.1.562.36.2.1.100.3.3.19.1.2
This attribute is indicative of the number of frames received on this bridge port that used the tinygram compression scheme.
OBJECT-TYPE    
  Counter32  

mscVrPpFddiETBTinygramFramesOut 1.3.6.1.4.1.562.36.2.1.100.3.3.19.1.3
This attribute is indicative of the number of frames transmitted out this bridge port that used the tinygram compression scheme.
OBJECT-TYPE    
  Counter32  

mscVrPpFddiETBInFilterDiscards 1.3.6.1.4.1.562.36.2.1.100.3.3.19.1.4
This attribute is indicative of the number of frames discarded at the in filter point. This includes a) frames discarded due to application of the filter defined with PCF for the in filter point and b) the frames discarded due to domain based filtering at the in filter point. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpFddiETBOutFilterDiscards 1.3.6.1.4.1.562.36.2.1.100.3.3.19.1.5
This attribute is indicative of the number of frames discarded at the out filter point. This includes: a) frames discarded due to application of the filter defined with PCF for the out filter point and b) the frames discarded due to domain based filtering at the out filter point. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbp 1.3.6.1.4.1.562.36.2.1.100.3.4
OBJECT IDENTIFIER    

mscVrPpTbpRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.3.4.1
This entry controls the addition and deletion of mscVrPpTbp components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbpRowStatusEntry

mscVrPpTbpRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.3.4.1.1
A single entry in the table represents a single mscVrPpTbp component.
OBJECT-TYPE    
  MscVrPpTbpRowStatusEntry  

mscVrPpTbpRowStatus 1.3.6.1.4.1.562.36.2.1.100.3.4.1.1.1
This variable is used as the basis for SNMP naming of mscVrPpTbp components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscVrPpTbpComponentName 1.3.6.1.4.1.562.36.2.1.100.3.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscVrPpTbpStorageType 1.3.6.1.4.1.562.36.2.1.100.3.4.1.1.4
This variable represents the storage type value for the mscVrPpTbp tables.
OBJECT-TYPE    
  StorageType  

mscVrPpTbpIndex 1.3.6.1.4.1.562.36.2.1.100.3.4.1.1.10
This variable represents the index for the mscVrPpTbp tables.
OBJECT-TYPE    
  NonReplicated  

mscVrPpTbpNs 1.3.6.1.4.1.562.36.2.1.100.3.4.2
OBJECT IDENTIFIER    

mscVrPpTbpNsRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.3.4.2.1
This entry controls the addition and deletion of mscVrPpTbpNs components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbpNsRowStatusEntry

mscVrPpTbpNsRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.3.4.2.1.1
A single entry in the table represents a single mscVrPpTbpNs component.
OBJECT-TYPE    
  MscVrPpTbpNsRowStatusEntry  

mscVrPpTbpNsRowStatus 1.3.6.1.4.1.562.36.2.1.100.3.4.2.1.1.1
This variable is used as the basis for SNMP naming of mscVrPpTbpNs components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscVrPpTbpNsComponentName 1.3.6.1.4.1.562.36.2.1.100.3.4.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscVrPpTbpNsStorageType 1.3.6.1.4.1.562.36.2.1.100.3.4.2.1.1.4
This variable represents the storage type value for the mscVrPpTbpNs tables.
OBJECT-TYPE    
  StorageType  

mscVrPpTbpNsIndex 1.3.6.1.4.1.562.36.2.1.100.3.4.2.1.1.10
This variable represents the index for the mscVrPpTbpNs tables.
OBJECT-TYPE    
  NonReplicated  

mscVrPpTbpNsProvTable 1.3.6.1.4.1.562.36.2.1.100.3.4.2.10
This group houses all the port specific provisionable attributes associated with Ns. These attributes influence the application of filters to incoming and outgoing frames.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbpNsProvEntry

mscVrPpTbpNsProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.4.2.10.1
An entry in the mscVrPpTbpNsProvTable.
OBJECT-TYPE    
  MscVrPpTbpNsProvEntry  

mscVrPpTbpNsIncomingFilter 1.3.6.1.4.1.562.36.2.1.100.3.4.2.10.1.2
This attribute specifies the name of the filter to be applied at the incoming filter point.
OBJECT-TYPE    
  AsciiString SIZE(0..32)  

mscVrPpTbpNsOutgoingFilter 1.3.6.1.4.1.562.36.2.1.100.3.4.2.10.1.3
This attribute specifies the name of the filter to be applied at the out going filter point.
OBJECT-TYPE    
  AsciiString SIZE(0..32)  

mscVrPpTbpProvTable 1.3.6.1.4.1.562.36.2.1.100.3.4.10
This group houses all the provisionable attributes that belong to the this group. This group of attributes is applicable to all types of bridge ports and represent the common factor between them. These attributes influence the working of a bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbpProvEntry

mscVrPpTbpProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.4.10.1
An entry in the mscVrPpTbpProvTable.
OBJECT-TYPE    
  MscVrPpTbpProvEntry  

mscVrPpTbpTranslateIpx 1.3.6.1.4.1.562.36.2.1.100.3.4.10.1.1
This attribute specifies the type of translation to be performed on frames carrying IPX packets. Ethernet frames carrying IPX payload could be translated to IEEE 802.3 frames (with the same IPX payload) or vice- versa. The main reason to do so is to allow the bridge unit to consistently forward one type of frames carrying IPX packets. Translations can be turned off altogether in which case the IPX frames will pass through the bridge unit unchanged.
OBJECT-TYPE    
  INTEGER off(0), ieee8023(1), ethernet(2), snap(3), sap(4)  

mscVrPpTbpFragmentIp 1.3.6.1.4.1.562.36.2.1.100.3.4.10.1.2
This attribute specifies if or not outbound frames carrying IP datagrams should be fragmented to conform to message transfer unit (mtu) sizes dictated by the media.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpTbpServiceClass 1.3.6.1.4.1.562.36.2.1.100.3.4.10.1.3
This attribute specifies if the frames should be ordered or not before they are transmitted through a bridge port. If this attribute has a value of ordered the received frames are ordered as in the original message, before they are transmitted out through a bridge port. If it has a value of notOrdered, received then frames pass through the bridge unit in the order they are received. This feature can be used over multiple telecommunication links to increase data flow. Please note that this attribute only affects link protocols and is ineffective with lan media.
OBJECT-TYPE    
  INTEGER ordered(0), notOrdered(1)  

mscVrPpTbpConvertArpMacAddress 1.3.6.1.4.1.562.36.2.1.100.3.4.10.1.4
This attribute is indicative of the state of the MAC address format conversion process for ARP/RARP frames. The MAC addresses may be translated if need be from a canonical format to a non-canonical format, based on the needs of the associated media. If this attribute is set to a value of on then all Mac addresses will converted if need be to suit the format of mac address, the outgoing media will support. If this attribute is set to a value of off no such conversion takes place.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpTbpPortNum 1.3.6.1.4.1.562.36.2.1.100.3.4.10.1.5
This attribute is indicative of the unique number assigned to the bridge port. It is used for SNMP management of this bridge port and in spanning tree as an identifier this bridge port. Notes regarding portNum: Escape routines exist for initializing, copying, and deleting port numbers. This is necessary because SNMP requires a unique port instance identifier. The initPortNum escape routine sets the port number to a value in the range 1-255 for this purpose. The setCopiedPortNum escape routine exists to maintain the uniqueness of the port number in cases when one port is copied to another. When a bridge port is deleted, the releasePortNum escape routine places the port number being released into a pending deletion state. This is because the port number cannot be re-allocated until the port is truely deleted in the current view. This is necessary since there is no guarantee of order when processing changes to multiple protocol ports so without the pending deletion state, the same port number could be temporarily assigned to two ports for a short period of time. The portNum is set as component critical since bridging also uses the port number as a key for indexing into its data structures. If a port is deleted then re-added under the same protocol port, CAS treats the change as a SET to the portNum attribute.
OBJECT-TYPE    
  Unsigned32 0..255  

mscVrPpTbpTbProvTable 1.3.6.1.4.1.562.36.2.1.100.3.4.11
This group houses all the port specific provisionable attributes that belong to the Tb group. The Tb group is only applicable bridge port types that operate in the TB mode. These attributes in part influence the working of a bridge port operating in the TB mode.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbpTbProvEntry

mscVrPpTbpTbProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.4.11.1
An entry in the mscVrPpTbpTbProvTable.
OBJECT-TYPE    
  MscVrPpTbpTbProvEntry  

mscVrPpTbpSecureOption 1.3.6.1.4.1.562.36.2.1.100.3.4.11.1.1
This attribute specifies whether the port secure feature is enabled. The secure feature, if enabled causes the following things to happen: a) disallows dynamic learning, b) disallows frames to be forwarded that do not satisfy the following condition: the mac address of the source should be found in the forwarding table and the destination mac address of the frame should also be found in the forwarding table. In addition to this, the port the frame was received on should figure as the in port, given the destination mac address found in the frame. c) disallows frames to be forwarded if the allowed to go port map for the destination mac address is empty. This feature in effect allows the user to choose the hosts that can generate traffic and the hosts that can receive traffic through this bridge unit.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscVrPpTbpStpProvTable 1.3.6.1.4.1.562.36.2.1.100.3.4.12
This group houses all the port specific provisionable attributes that belong to the Stp group. The Stp group is applicable to all the bridge ports that participate in the spanning tree protocol. These attributes influence the participation of the bridge port in the spanning tree protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbpStpProvEntry

mscVrPpTbpStpProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.4.12.1
An entry in the mscVrPpTbpStpProvTable.
OBJECT-TYPE    
  MscVrPpTbpStpProvEntry  

mscVrPpTbpAdminStatus 1.3.6.1.4.1.562.36.2.1.100.3.4.12.1.1
This attribute defines the current administrative state for this component. enabled indicates that the component is available for operation. disabled indicates the component is unavailable for operation.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mscVrPpTbpPortStateStpControl 1.3.6.1.4.1.562.36.2.1.100.3.4.12.1.2
This attribute specifies whether or not spanning tree protocol state for this bridge port is controlled by the spanning tree protocol. In essence it indicates the participation of this bridge port in the spanning tree protocol, by accepting and acting on received bridge protocol data units and by sending out the same. on signifies that this bridge port's spanning tree port state is controlled by the spanning tree protocol. A value of off signifies that the spanning tree port state of this bridge port is unaffected by the spanning tree protocol. This in effect puts the bridge port out of reach of the spanning tree protocol and in the forwarding state. Care should be taken while assigning a value of off to this attribute, as this might cause network loops. Please do not set this attribute to off unless you are absolutely sure about the effect of such an action on your network topology.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpTbpStpTypeProv 1.3.6.1.4.1.562.36.2.1.100.3.4.12.1.3
This attribute specifies the type of spanning tree protocol the port is participating in. A bridge port could participate in either the ieee8021 spanning tree protocol or the dec spanning tree protocol. If the value of the attribute protocolSpec in the SpanningTreeProtocol component, provisioned under the TransparentBridge component is in conflict with the value of this attribute, the value of the protocolSpec attribute will prevail. Prevailing stp type is reflected in the value of the attribute stpTypeOper.
OBJECT-TYPE    
  INTEGER dec(2), ieee8021(3)  

mscVrPpTbpPortPriority 1.3.6.1.4.1.562.36.2.1.100.3.4.12.1.4
This attribute specifies the value for port priority, which is contained in the first octet of the port identifier. Valid values are as follows: 1) 0..255 for stp type DEC and 2) 0..65535 for stp type IEEE.
OBJECT-TYPE    
  Unsigned32 0..65535  

mscVrPpTbpPathCost 1.3.6.1.4.1.562.36.2.1.100.3.4.12.1.5
This attribute specifies the contribution of this port, to all the paths to the root bridge that include this port. Please note that the value of the attribute pathCostMethod is applied only when the value of the attribute pathCostMethod is set to on and is ignored if otherwise.
OBJECT-TYPE    
  Unsigned32 1..65535  

mscVrPpTbpPathCostMethod 1.3.6.1.4.1.562.36.2.1.100.3.4.12.1.6
This attribute specifies the method used by the bridging logic, to calculate the path cost to the bridge considered to be the root bridge in the spanning tree topology. This attribute should be set to off before attempting to provision a value for pathCostProv.
OBJECT-TYPE    
  INTEGER off(1), dec(2), ieee8021(3)  

mscVrPpTbpDIProvTable 1.3.6.1.4.1.562.36.2.1.100.3.4.13
This group houses all the provisionable, domain specific attributes for a non-encapsulating bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbpDIProvEntry

mscVrPpTbpDIProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.4.13.1
An entry in the mscVrPpTbpDIProvTable.
OBJECT-TYPE    
  MscVrPpTbpDIProvEntry  

mscVrPpTbpDomainNum 1.3.6.1.4.1.562.36.2.1.100.3.4.13.1.1
This attribute specifies the domain number associated with this bridge port. Domain numbers are used for confining frames to a domain. Domain based filtering provides a complete segregation of traffic based on domain number associated with frames. There can exist only sixteen domains when a spanning tree is desired specific to each domain. When there is only a single spanning tree spanning all the domains the maximum number of domains possible are 4294967293. This attribute is of no relevance when associated with backbone bridge port. Its value is ignored in such a situation.
OBJECT-TYPE    
  Unsigned32 1..4294967293  

mscVrPpTbpPreserveDomain 1.3.6.1.4.1.562.36.2.1.100.3.4.13.1.2
This attribute specifies if the domain information should be preserved or embedded in the frame header. This attribute applies only to backbone ports and does not affect the access bridge ports. By setting this attribute to a value of on, domain information could be preserved in frames being tunnelled across the a backbone, so that this information can be deciphered at the other end of the backbone tunnel. This preserves the integrity of the domains thus preventing domain breaches while tunnelling frames across backbone network. If the value of this attribute is set to off then domain information is not preserved in the header of the frames tunnelling through the backbone. This eliminates the overhead incurred to preserve domain information across the backbone while tunnelling frames across it. Preserve domain is relevant when used in conjunction with the following media: FDDI, ATM MPE, Frame Relay and PPP. It is ignored when used with other types of media.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpTbpStateTable 1.3.6.1.4.1.562.36.2.1.100.3.4.14
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbpStateEntry

mscVrPpTbpStateEntry 1.3.6.1.4.1.562.36.2.1.100.3.4.14.1
An entry in the mscVrPpTbpStateTable.
OBJECT-TYPE    
  MscVrPpTbpStateEntry  

mscVrPpTbpAdminState 1.3.6.1.4.1.562.36.2.1.100.3.4.14.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscVrPpTbpOperationalState 1.3.6.1.4.1.562.36.2.1.100.3.4.14.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscVrPpTbpUsageState 1.3.6.1.4.1.562.36.2.1.100.3.4.14.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscVrPpTbpOperStatusTable 1.3.6.1.4.1.562.36.2.1.100.3.4.15
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbpOperStatusEntry

mscVrPpTbpOperStatusEntry 1.3.6.1.4.1.562.36.2.1.100.3.4.15.1
An entry in the mscVrPpTbpOperStatusTable.
OBJECT-TYPE    
  MscVrPpTbpOperStatusEntry  

mscVrPpTbpSnmpOperStatus 1.3.6.1.4.1.562.36.2.1.100.3.4.15.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscVrPpTbpOperTable 1.3.6.1.4.1.562.36.2.1.100.3.4.16
This group houses all the operational attributes belonging to the base group. The base group of attributes is applicable to all types of bridge ports and represent the common factor between them. These attributes in part, reflect the state of a bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbpOperEntry

mscVrPpTbpOperEntry 1.3.6.1.4.1.562.36.2.1.100.3.4.16.1
An entry in the mscVrPpTbpOperTable.
OBJECT-TYPE    
  MscVrPpTbpOperEntry  

mscVrPpTbpPortName 1.3.6.1.4.1.562.36.2.1.100.3.4.16.1.1
The attribute portName is a string of the form 'BridgePortName-i', where BridgePortName is the abbreviation of the corresponding bridge port and i is the instance identifier of the ProtocolPort, the bridge port is provisioned under. For example a TransparentBridgePort provisioned under ProtocolPort/myport would have a name TBP-myport.
OBJECT-TYPE    
  AsciiString SIZE(4..29)  

mscVrPpTbpUpTime 1.3.6.1.4.1.562.36.2.1.100.3.4.16.1.3
This attribute specifies the accumulated up time of this bridge port since the last reset occurred.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpTbpDownTime 1.3.6.1.4.1.562.36.2.1.100.3.4.16.1.4
This attribute specifies the accumulated down time of this bridge port since the last reset occurred.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpTbpBridgingMode 1.3.6.1.4.1.562.36.2.1.100.3.4.16.1.5
This attribute specifies the mode of bridging this port can support. It in turn implies the format of frames, this bridge port can process and forward.
OBJECT-TYPE    
  INTEGER unknown(1), tb(2), sr(3), srt(4)  

mscVrPpTbpBridgePortConfig 1.3.6.1.4.1.562.36.2.1.100.3.4.16.1.6
This attribute specifies the bridge port's configuration. It indicates if the bridge port is operating as an access port or as a backbone port. An access bridge port does not encapsulate a MAC frame and does not preserve domain information in the encapsulation, whereas a backbone bridge port encapsulates the MAC frame and optionally preserves domain information in the encapsulated frame.A backbone bridge port is typically used to transport frames across a high bandwidth backbone network to another bridge unit for further processing/forwarding of the frame.
OBJECT-TYPE    
  INTEGER access(1), backbone(2)  

mscVrPpTbpBridgePortType 1.3.6.1.4.1.562.36.2.1.100.3.4.16.1.7
This attribute specifies the type of bridge port that was provisioned. It takes into consideration the bridgingMode, bridgePortConfig and the media the bridge port is linked to before branding a bridge port.
OBJECT-TYPE    
  INTEGER ethernetBridgePort(0), tokenRingBridgePort(1), fddiBridgePort(2), tokenBusBridgePort(3), fddiEncapsulatingBridgePort(4), vnsBridgePort(5), frameRelayBridgePort(6), pppBridgePort(7), smdsBridgePort(8), vcpBridgePort(9), x25BridgePort(10), srEncapSrBridgePort(11), srEncapTbBridgePort(12), sourceGateSrBridgePort(13), sourceGateTbBridgePort(14), srtbBridgePort(15), tbsrBridgePort(16), clusterSrBridgePort(17), clusterTbBridgePort(18), unknown(19), atmMpeBridgePort(20), snaDlrBridgePort(21), lanEmulationClientEthernet(22)  

mscVrPpTbpIfIndex 1.3.6.1.4.1.562.36.2.1.100.3.4.16.1.8
This attribute specifies the index into the Interface Table where in information about the media interface corresponding to the bridge port is maintained.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscVrPpTbpDelayExceededDiscards 1.3.6.1.4.1.562.36.2.1.100.3.4.16.1.10
This attribute is indicative of the number of frames that were discarded because the time taken to process these frames exceeded the transit delay allowed for this bridge unit. This attribute is not supported by bridging and will always have a value of 0.
OBJECT-TYPE    
  Counter32  

mscVrPpTbpMtuExceededDiscards 1.3.6.1.4.1.562.36.2.1.100.3.4.16.1.11
This attribute is indicative of the number of frames discarded because the size of the out bound frame exceeded the message transfer unit (mtu) allowed for the bridge port. Note that this counter only refers to the outbound frames for this bridge port. This counter wraps around its maximum value of 4294967295. This counter is influenced by the attribute fragmentIp. This counter is incremented when the a frame larger than the mtu allowed is encountered and cannot be fragmented. If this counter is increasing steadily, it might be useful to set the value of the attribute fragmentIp to a value of on.
OBJECT-TYPE    
  Counter32  

mscVrPpTbpTbOperTable 1.3.6.1.4.1.562.36.2.1.100.3.4.17
This group houses all the port specific operational attributes that belong to the Tb group. This group also houses all the port specific statistical attributes that belong to the Tb group. The Tb group is only applicable bridge port types that operate in the TB mode. These attributes reflect the state of a bridge port operating in the TB mode
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbpTbOperEntry

mscVrPpTbpTbOperEntry 1.3.6.1.4.1.562.36.2.1.100.3.4.17.1
An entry in the mscVrPpTbpTbOperTable.
OBJECT-TYPE    
  MscVrPpTbpTbOperEntry  

mscVrPpTbpMaxInfo 1.3.6.1.4.1.562.36.2.1.100.3.4.17.1.2
This attribute specifies the maximum size of the information field in a TB frame. This excludes the header field.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpTbpBadVerifyDiscards 1.3.6.1.4.1.562.36.2.1.100.3.4.17.1.3
This attribute is indicative of the number of incoming frames that were discarded because: a) the value of the secureOption attribute was set to on and b) it is not allowed to receive frames originating from the mac address found in the source address field of the frame (source mac address look up in the forwarding table failed.) on this bridge port. c) for the destination mac address found in the frame, the port the frame was received on does not appear as in port in the corresponding static table entry. Permission to receive frames from a mac address is granted via the static table entries. This attribute, badVerifyDiscards, is directly influenced by: 1. secureOption and 2. the static table entries. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbpUnicastNoMatches 1.3.6.1.4.1.562.36.2.1.100.3.4.17.1.4
This attribute is indicative of the number frames discarded because the MAC address found in the destination field did not match the local MAC address of the bridge port. This counter is only applicable for the protocols that are being routed currently.This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbpStaticEntryDiscards 1.3.6.1.4.1.562.36.2.1.100.3.4.17.1.5
This attribute is indicative of the number of frames that were discarded because of the following two reasons: a) there was no entry for the 'allowed to go' field in the static table entry, where the input port is this bridge port. b) for spanning tree bpdus that are locally processed. This counter wraps around its maximum value of 4294967295. It might prove useful to check the static table entry corresponding to the bridge port in question, if this counter consistently displays a high value. Ideally this counter should be as low as possible.
OBJECT-TYPE    
  Counter32  

mscVrPpTbpDynamicEntryDiscards 1.3.6.1.4.1.562.36.2.1.100.3.4.17.1.6
This attribute is indicative of the number of incoming frames that a) were discarded because of the fact that the bridge port, the frame is to go out of matches the bridge port it came in from or b) if the stp port state of the out port is not forwarding. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbpLearningDiscards 1.3.6.1.4.1.562.36.2.1.100.3.4.17.1.7
This attribute is indicative of the number of frames that were discarded while this bridge port was in a state other than the forwarding state. While in learning state the frame is discarded after the information from its header is learnt. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbpInDiscards 1.3.6.1.4.1.562.36.2.1.100.3.4.17.1.8
This attribute is indicative of the number of frames that were received by this bridge port and were discarded by the forwarding process. This includes frames that could have been discarded due to filtering. A repidly increasing value for this attribute could indicate a shrtage of resource in terms of memory needed to process the incoming frames. More memory can be provisioned through the VirtualRouter's memory manager.
OBJECT-TYPE    
  Counter32  

mscVrPpTbpInFrames 1.3.6.1.4.1.562.36.2.1.100.3.4.17.1.9
This attribute is indicative of the number of frames that have been received by this port from its segment. Note that a frame received on this bridge port is counted if and only if it can be processed by the bridge logic contained in this bridge unit, a protocol that can be processed by the bridge logic. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbpOutFrames 1.3.6.1.4.1.562.36.2.1.100.3.4.17.1.10
This attribute is indicative of the number of frames that have been transmitted out this bridge port. Note that frame transmitted out this bridge port is counted if and only if it is for a protocol being processed by the bridge unit. This also includes management frames.This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbpStpOperTable 1.3.6.1.4.1.562.36.2.1.100.3.4.18
This group houses all the port specific operational attributes that belong to the Stp group. The Stp group is applicable to all the bridge ports that participate in the spanning tree protocol. These attributes reflect the state of the bridge port's participation in the spanning tree protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbpStpOperEntry

mscVrPpTbpStpOperEntry 1.3.6.1.4.1.562.36.2.1.100.3.4.18.1
An entry in the mscVrPpTbpStpOperTable.
OBJECT-TYPE    
  MscVrPpTbpStpOperEntry  

mscVrPpTbpStpPortState 1.3.6.1.4.1.562.36.2.1.100.3.4.18.1.2
This attribute specifies the spanning tree protocol state of the bridge port.
OBJECT-TYPE    
  INTEGER disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6)  

mscVrPpTbpStpTypeOper 1.3.6.1.4.1.562.36.2.1.100.3.4.18.1.3
This attribute specifies the type of spanning tree protocol the port is participating in. A bridge port could participate in either the ieee8021 spanning tree protocol or the dec spanning tree protocol.
OBJECT-TYPE    
  INTEGER none(0), dec(2), ieee8021(3)  

mscVrPpTbpDesignatedCost 1.3.6.1.4.1.562.36.2.1.100.3.4.18.1.4
This attribute specifies the path cost of the designated port of the lan segment connected to the port.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpTbpPathCostOper 1.3.6.1.4.1.562.36.2.1.100.3.4.18.1.5
This attribute specifies the contribution of this port, to all the paths to the root bridge that include this port. This attribute pathCostOper will track the value of the attribute pathCostProv when the value of the attribute pathCostMethod is set of off.
OBJECT-TYPE    
  Unsigned32 1..65535  

mscVrPpTbpDesignatedBridge 1.3.6.1.4.1.562.36.2.1.100.3.4.18.1.6
This attribute specifies the identifier of the bridge that this port considers to be the designated bridge.
OBJECT-TYPE    
  BridgeId SIZE(8)  

mscVrPpTbpDesignatedPort 1.3.6.1.4.1.562.36.2.1.100.3.4.18.1.7
This attribute specifies the port identifier of the port on the designated bridge, attached to the same lan as this port is attached to.
OBJECT-TYPE    
  Hex 0..65535  

mscVrPpTbpForwardTransitions 1.3.6.1.4.1.562.36.2.1.100.3.4.18.1.8
This attribute is indicative of the number of times this bridge port transitioned from the learning state to the forwarding state. This counter wraps around its maximum value of 4294967295. A rapidly increasing value might be indicative of an unstable spanning tree topology.
OBJECT-TYPE    
  Counter32  

mscVrPpTbpBlockingDiscards 1.3.6.1.4.1.562.36.2.1.100.3.4.18.1.9
This attribute is indicative of the number of incoming frames that were discarded because the bridge port was in the blocking state. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbpDesignatedRoot 1.3.6.1.4.1.562.36.2.1.100.3.4.18.1.10
This attribute specifies the bridge identifier of the bridge recorded as the root bridge, in the configuration BPDUs sent out by the designated bridge on the segment to which the port is attached.
OBJECT-TYPE    
  BridgeId SIZE(8)  

mscVrPpTbpStatsTable 1.3.6.1.4.1.562.36.2.1.100.3.4.19
This group houses all the statistical attributes applicable to all types of bridge ports and represents the common factor between them. These attributes in part reflect the state of the bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbpStatsEntry

mscVrPpTbpStatsEntry 1.3.6.1.4.1.562.36.2.1.100.3.4.19.1
An entry in the mscVrPpTbpStatsTable.
OBJECT-TYPE    
  MscVrPpTbpStatsEntry  

mscVrPpTbpBadAbstractDiscards 1.3.6.1.4.1.562.36.2.1.100.3.4.19.1.1
This attribute is indicative of the number of frames that were discarded because the data that was abstracted, from frames coming in through this bridge port, did not conform to the format expected by the bridge logic.This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbpTinygramFramesIn 1.3.6.1.4.1.562.36.2.1.100.3.4.19.1.2
This attribute is indicative of the number of frames received on this bridge port that used the tinygram compression scheme.
OBJECT-TYPE    
  Counter32  

mscVrPpTbpTinygramFramesOut 1.3.6.1.4.1.562.36.2.1.100.3.4.19.1.3
This attribute is indicative of the number of frames transmitted out this bridge port that used the tinygram compression scheme.
OBJECT-TYPE    
  Counter32  

mscVrPpTbpInFilterDiscards 1.3.6.1.4.1.562.36.2.1.100.3.4.19.1.4
This attribute is indicative of the number of frames discarded at the in filter point. This includes a) frames discarded due to application of the filter defined with PCF for the in filter point and b) the frames discarded due to domain based filtering at the in filter point. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbpOutFilterDiscards 1.3.6.1.4.1.562.36.2.1.100.3.4.19.1.5
This attribute is indicative of the number of frames discarded at the out filter point. This includes: a) frames discarded due to application of the filter defined with PCF for the out filter point and b) the frames discarded due to domain based filtering at the out filter point. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpSrBp 1.3.6.1.4.1.562.36.2.1.100.3.8
OBJECT IDENTIFIER    

mscVrPpSrBpRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.3.8.1
This entry controls the addition and deletion of mscVrPpSrBp components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrBpRowStatusEntry

mscVrPpSrBpRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.3.8.1.1
A single entry in the table represents a single mscVrPpSrBp component.
OBJECT-TYPE    
  MscVrPpSrBpRowStatusEntry  

mscVrPpSrBpRowStatus 1.3.6.1.4.1.562.36.2.1.100.3.8.1.1.1
This variable is used as the basis for SNMP naming of mscVrPpSrBp components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscVrPpSrBpComponentName 1.3.6.1.4.1.562.36.2.1.100.3.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscVrPpSrBpStorageType 1.3.6.1.4.1.562.36.2.1.100.3.8.1.1.4
This variable represents the storage type value for the mscVrPpSrBp tables.
OBJECT-TYPE    
  StorageType  

mscVrPpSrBpIndex 1.3.6.1.4.1.562.36.2.1.100.3.8.1.1.10
This variable represents the index for the mscVrPpSrBp tables.
OBJECT-TYPE    
  NonReplicated  

mscVrPpSrBpNs 1.3.6.1.4.1.562.36.2.1.100.3.8.2
OBJECT IDENTIFIER    

mscVrPpSrBpNsRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.3.8.2.1
This entry controls the addition and deletion of mscVrPpSrBpNs components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrBpNsRowStatusEntry

mscVrPpSrBpNsRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.3.8.2.1.1
A single entry in the table represents a single mscVrPpSrBpNs component.
OBJECT-TYPE    
  MscVrPpSrBpNsRowStatusEntry  

mscVrPpSrBpNsRowStatus 1.3.6.1.4.1.562.36.2.1.100.3.8.2.1.1.1
This variable is used as the basis for SNMP naming of mscVrPpSrBpNs components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscVrPpSrBpNsComponentName 1.3.6.1.4.1.562.36.2.1.100.3.8.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscVrPpSrBpNsStorageType 1.3.6.1.4.1.562.36.2.1.100.3.8.2.1.1.4
This variable represents the storage type value for the mscVrPpSrBpNs tables.
OBJECT-TYPE    
  StorageType  

mscVrPpSrBpNsIndex 1.3.6.1.4.1.562.36.2.1.100.3.8.2.1.1.10
This variable represents the index for the mscVrPpSrBpNs tables.
OBJECT-TYPE    
  NonReplicated  

mscVrPpSrBpNsProvTable 1.3.6.1.4.1.562.36.2.1.100.3.8.2.10
This group houses all the port specific provisionable attributes associated with Ns. These attributes influence the application of filters to incoming and outgoing frames.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrBpNsProvEntry

mscVrPpSrBpNsProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.8.2.10.1
An entry in the mscVrPpSrBpNsProvTable.
OBJECT-TYPE    
  MscVrPpSrBpNsProvEntry  

mscVrPpSrBpNsIncomingFilter 1.3.6.1.4.1.562.36.2.1.100.3.8.2.10.1.2
This attribute specifies the name of the filter to be applied at the incoming filter point.
OBJECT-TYPE    
  AsciiString SIZE(0..32)  

mscVrPpSrBpNsOutgoingFilter 1.3.6.1.4.1.562.36.2.1.100.3.8.2.10.1.3
This attribute specifies the name of the filter to be applied at the out going filter point.
OBJECT-TYPE    
  AsciiString SIZE(0..32)  

mscVrPpSrBpProvTable 1.3.6.1.4.1.562.36.2.1.100.3.8.10
This group houses all the provisionable attributes that belong to the this group. This group of attributes is applicable to all types of bridge ports and represent the common factor between them. These attributes influence the working of a bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrBpProvEntry

mscVrPpSrBpProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.8.10.1
An entry in the mscVrPpSrBpProvTable.
OBJECT-TYPE    
  MscVrPpSrBpProvEntry  

mscVrPpSrBpTranslateIpx 1.3.6.1.4.1.562.36.2.1.100.3.8.10.1.1
This attribute specifies the type of translation to be performed on frames carrying IPX packets. Ethernet frames carrying IPX payload could be translated to IEEE 802.3 frames (with the same IPX payload) or vice- versa. The main reason to do so is to allow the bridge unit to consistently forward one type of frames carrying IPX packets. Translations can be turned off altogether in which case the IPX frames will pass through the bridge unit unchanged.
OBJECT-TYPE    
  INTEGER off(0), ieee8023(1), ethernet(2), snap(3), sap(4)  

mscVrPpSrBpFragmentIp 1.3.6.1.4.1.562.36.2.1.100.3.8.10.1.2
This attribute specifies if or not outbound frames carrying IP datagrams should be fragmented to conform to message transfer unit (mtu) sizes dictated by the media.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpSrBpServiceClass 1.3.6.1.4.1.562.36.2.1.100.3.8.10.1.3
This attribute specifies if the frames should be ordered or not before they are transmitted through a bridge port. If this attribute has a value of ordered the received frames are ordered as in the original message, before they are transmitted out through a bridge port. If it has a value of notOrdered, received then frames pass through the bridge unit in the order they are received. This feature can be used over multiple telecommunication links to increase data flow. Please note that this attribute only affects link protocols and is ineffective with lan media.
OBJECT-TYPE    
  INTEGER ordered(0), notOrdered(1)  

mscVrPpSrBpConvertArpMacAddress 1.3.6.1.4.1.562.36.2.1.100.3.8.10.1.4
This attribute is indicative of the state of the MAC address format conversion process for ARP/RARP frames. The MAC addresses may be translated if need be from a canonical format to a non-canonical format, based on the needs of the associated media. If this attribute is set to a value of on then all Mac addresses will converted if need be to suit the format of mac address, the outgoing media will support. If this attribute is set to a value of off no such conversion takes place.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpSrBpPortNum 1.3.6.1.4.1.562.36.2.1.100.3.8.10.1.5
This attribute is indicative of the unique number assigned to the bridge port. It is used for SNMP management of this bridge port and in spanning tree as an identifier this bridge port. Notes regarding portNum: Escape routines exist for initializing, copying, and deleting port numbers. This is necessary because SNMP requires a unique port instance identifier. The initPortNum escape routine sets the port number to a value in the range 1-255 for this purpose. The setCopiedPortNum escape routine exists to maintain the uniqueness of the port number in cases when one port is copied to another. When a bridge port is deleted, the releasePortNum escape routine places the port number being released into a pending deletion state. This is because the port number cannot be re-allocated until the port is truely deleted in the current view. This is necessary since there is no guarantee of order when processing changes to multiple protocol ports so without the pending deletion state, the same port number could be temporarily assigned to two ports for a short period of time. The portNum is set as component critical since bridging also uses the port number as a key for indexing into its data structures. If a port is deleted then re-added under the same protocol port, CAS treats the change as a SET to the portNum attribute.
OBJECT-TYPE    
  Unsigned32 0..255  

mscVrPpSrBpStpProvTable 1.3.6.1.4.1.562.36.2.1.100.3.8.12
This group houses all the port specific provisionable attributes that belong to the Stp group. The Stp group is applicable to all the bridge ports that participate in the spanning tree protocol. These attributes influence the participation of the bridge port in the spanning tree protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrBpStpProvEntry

mscVrPpSrBpStpProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.8.12.1
An entry in the mscVrPpSrBpStpProvTable.
OBJECT-TYPE    
  MscVrPpSrBpStpProvEntry  

mscVrPpSrBpAdminStatus 1.3.6.1.4.1.562.36.2.1.100.3.8.12.1.1
This attribute defines the current administrative state for this component. enabled indicates that the component is available for operation. disabled indicates the component is unavailable for operation.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mscVrPpSrBpPortStateStpControl 1.3.6.1.4.1.562.36.2.1.100.3.8.12.1.2
This attribute specifies whether or not spanning tree protocol state for this bridge port is controlled by the spanning tree protocol. In essence it indicates the participation of this bridge port in the spanning tree protocol, by accepting and acting on received bridge protocol data units and by sending out the same. on signifies that this bridge port's spanning tree port state is controlled by the spanning tree protocol. A value of off signifies that the spanning tree port state of this bridge port is unaffected by the spanning tree protocol. This in effect puts the bridge port out of reach of the spanning tree protocol and in the forwarding state. Care should be taken while assigning a value of off to this attribute, as this might cause network loops. Please do not set this attribute to off unless you are absolutely sure about the effect of such an action on your network topology.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpSrBpStpTypeProv 1.3.6.1.4.1.562.36.2.1.100.3.8.12.1.3
This attribute specifies the type of spanning tree protocol the port is participating in. A bridge port could participate in either the ieee8021 spanning tree protocol or the dec spanning tree protocol. If the value of the attribute protocolSpec in the SpanningTreeProtocol component, provisioned under the TransparentBridge component is in conflict with the value of this attribute, the value of the protocolSpec attribute will prevail. Prevailing stp type is reflected in the value of the attribute stpTypeOper.
OBJECT-TYPE    
  INTEGER dec(2), ieee8021(3)  

mscVrPpSrBpPortPriority 1.3.6.1.4.1.562.36.2.1.100.3.8.12.1.4
This attribute specifies the value for port priority, which is contained in the first octet of the port identifier. Valid values are as follows: 1) 0..255 for stp type DEC and 2) 0..65535 for stp type IEEE.
OBJECT-TYPE    
  Unsigned32 0..65535  

mscVrPpSrBpPathCost 1.3.6.1.4.1.562.36.2.1.100.3.8.12.1.5
This attribute specifies the contribution of this port, to all the paths to the root bridge that include this port. Please note that the value of the attribute pathCostMethod is applied only when the value of the attribute pathCostMethod is set to on and is ignored if otherwise.
OBJECT-TYPE    
  Unsigned32 1..65535  

mscVrPpSrBpPathCostMethod 1.3.6.1.4.1.562.36.2.1.100.3.8.12.1.6
This attribute specifies the method used by the bridging logic, to calculate the path cost to the bridge considered to be the root bridge in the spanning tree topology. This attribute should be set to off before attempting to provision a value for pathCostProv.
OBJECT-TYPE    
  INTEGER off(1), dec(2), ieee8021(3)  

mscVrPpSrBpDIProvTable 1.3.6.1.4.1.562.36.2.1.100.3.8.13
This group houses all the provisionable, domain specific attributes for a non-encapsulating bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrBpDIProvEntry

mscVrPpSrBpDIProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.8.13.1
An entry in the mscVrPpSrBpDIProvTable.
OBJECT-TYPE    
  MscVrPpSrBpDIProvEntry  

mscVrPpSrBpDomainNum 1.3.6.1.4.1.562.36.2.1.100.3.8.13.1.1
This attribute specifies the domain number associated with this bridge port. Domain numbers are used for confining frames to a domain. Domain based filtering provides a complete segregation of traffic based on domain number associated with frames. There can exist only sixteen domains when a spanning tree is desired specific to each domain. When there is only a single spanning tree spanning all the domains the maximum number of domains possible are 4294967293. This attribute is of no relevance when associated with backbone bridge port. Its value is ignored in such a situation.
OBJECT-TYPE    
  Unsigned32 1..4294967293  

mscVrPpSrBpPreserveDomain 1.3.6.1.4.1.562.36.2.1.100.3.8.13.1.2
This attribute specifies if the domain information should be preserved or embedded in the frame header. This attribute applies only to backbone ports and does not affect the access bridge ports. By setting this attribute to a value of on, domain information could be preserved in frames being tunnelled across the a backbone, so that this information can be deciphered at the other end of the backbone tunnel. This preserves the integrity of the domains thus preventing domain breaches while tunnelling frames across backbone network. If the value of this attribute is set to off then domain information is not preserved in the header of the frames tunnelling through the backbone. This eliminates the overhead incurred to preserve domain information across the backbone while tunnelling frames across it. Preserve domain is relevant when used in conjunction with the following media: FDDI, ATM MPE, Frame Relay and PPP. It is ignored when used with other types of media.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpSrBpStateTable 1.3.6.1.4.1.562.36.2.1.100.3.8.14
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrBpStateEntry

mscVrPpSrBpStateEntry 1.3.6.1.4.1.562.36.2.1.100.3.8.14.1
An entry in the mscVrPpSrBpStateTable.
OBJECT-TYPE    
  MscVrPpSrBpStateEntry  

mscVrPpSrBpAdminState 1.3.6.1.4.1.562.36.2.1.100.3.8.14.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscVrPpSrBpOperationalState 1.3.6.1.4.1.562.36.2.1.100.3.8.14.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscVrPpSrBpUsageState 1.3.6.1.4.1.562.36.2.1.100.3.8.14.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscVrPpSrBpOperStatusTable 1.3.6.1.4.1.562.36.2.1.100.3.8.15
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrBpOperStatusEntry

mscVrPpSrBpOperStatusEntry 1.3.6.1.4.1.562.36.2.1.100.3.8.15.1
An entry in the mscVrPpSrBpOperStatusTable.
OBJECT-TYPE    
  MscVrPpSrBpOperStatusEntry  

mscVrPpSrBpSnmpOperStatus 1.3.6.1.4.1.562.36.2.1.100.3.8.15.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscVrPpSrBpOperTable 1.3.6.1.4.1.562.36.2.1.100.3.8.16
This group houses all the operational attributes belonging to the base group. The base group of attributes is applicable to all types of bridge ports and represent the common factor between them. These attributes in part, reflect the state of a bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrBpOperEntry

mscVrPpSrBpOperEntry 1.3.6.1.4.1.562.36.2.1.100.3.8.16.1
An entry in the mscVrPpSrBpOperTable.
OBJECT-TYPE    
  MscVrPpSrBpOperEntry  

mscVrPpSrBpPortName 1.3.6.1.4.1.562.36.2.1.100.3.8.16.1.1
The attribute portName is a string of the form 'BridgePortName-i', where BridgePortName is the abbreviation of the corresponding bridge port and i is the instance identifier of the ProtocolPort, the bridge port is provisioned under. For example a TransparentBridgePort provisioned under ProtocolPort/myport would have a name TBP-myport.
OBJECT-TYPE    
  AsciiString SIZE(4..29)  

mscVrPpSrBpUpTime 1.3.6.1.4.1.562.36.2.1.100.3.8.16.1.3
This attribute specifies the accumulated up time of this bridge port since the last reset occurred.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpSrBpDownTime 1.3.6.1.4.1.562.36.2.1.100.3.8.16.1.4
This attribute specifies the accumulated down time of this bridge port since the last reset occurred.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpSrBpBridgingMode 1.3.6.1.4.1.562.36.2.1.100.3.8.16.1.5
This attribute specifies the mode of bridging this port can support. It in turn implies the format of frames, this bridge port can process and forward.
OBJECT-TYPE    
  INTEGER unknown(1), tb(2), sr(3), srt(4)  

mscVrPpSrBpBridgePortConfig 1.3.6.1.4.1.562.36.2.1.100.3.8.16.1.6
This attribute specifies the bridge port's configuration. It indicates if the bridge port is operating as an access port or as a backbone port. An access bridge port does not encapsulate a MAC frame and does not preserve domain information in the encapsulation, whereas a backbone bridge port encapsulates the MAC frame and optionally preserves domain information in the encapsulated frame.A backbone bridge port is typically used to transport frames across a high bandwidth backbone network to another bridge unit for further processing/forwarding of the frame.
OBJECT-TYPE    
  INTEGER access(1), backbone(2)  

mscVrPpSrBpBridgePortType 1.3.6.1.4.1.562.36.2.1.100.3.8.16.1.7
This attribute specifies the type of bridge port that was provisioned. It takes into consideration the bridgingMode, bridgePortConfig and the media the bridge port is linked to before branding a bridge port.
OBJECT-TYPE    
  INTEGER ethernetBridgePort(0), tokenRingBridgePort(1), fddiBridgePort(2), tokenBusBridgePort(3), fddiEncapsulatingBridgePort(4), vnsBridgePort(5), frameRelayBridgePort(6), pppBridgePort(7), smdsBridgePort(8), vcpBridgePort(9), x25BridgePort(10), srEncapSrBridgePort(11), srEncapTbBridgePort(12), sourceGateSrBridgePort(13), sourceGateTbBridgePort(14), srtbBridgePort(15), tbsrBridgePort(16), clusterSrBridgePort(17), clusterTbBridgePort(18), unknown(19), atmMpeBridgePort(20), snaDlrBridgePort(21), lanEmulationClientEthernet(22)  

mscVrPpSrBpIfIndex 1.3.6.1.4.1.562.36.2.1.100.3.8.16.1.8
This attribute specifies the index into the Interface Table where in information about the media interface corresponding to the bridge port is maintained.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscVrPpSrBpDelayExceededDiscards 1.3.6.1.4.1.562.36.2.1.100.3.8.16.1.10
This attribute is indicative of the number of frames that were discarded because the time taken to process these frames exceeded the transit delay allowed for this bridge unit. This attribute is not supported by bridging and will always have a value of 0.
OBJECT-TYPE    
  Counter32  

mscVrPpSrBpMtuExceededDiscards 1.3.6.1.4.1.562.36.2.1.100.3.8.16.1.11
This attribute is indicative of the number of frames discarded because the size of the out bound frame exceeded the message transfer unit (mtu) allowed for the bridge port. Note that this counter only refers to the outbound frames for this bridge port. This counter wraps around its maximum value of 4294967295. This counter is influenced by the attribute fragmentIp. This counter is incremented when the a frame larger than the mtu allowed is encountered and cannot be fragmented. If this counter is increasing steadily, it might be useful to set the value of the attribute fragmentIp to a value of on.
OBJECT-TYPE    
  Counter32  

mscVrPpSrBpStpOperTable 1.3.6.1.4.1.562.36.2.1.100.3.8.18
This group houses all the port specific operational attributes that belong to the Stp group. The Stp group is applicable to all the bridge ports that participate in the spanning tree protocol. These attributes reflect the state of the bridge port's participation in the spanning tree protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrBpStpOperEntry

mscVrPpSrBpStpOperEntry 1.3.6.1.4.1.562.36.2.1.100.3.8.18.1
An entry in the mscVrPpSrBpStpOperTable.
OBJECT-TYPE    
  MscVrPpSrBpStpOperEntry  

mscVrPpSrBpStpPortState 1.3.6.1.4.1.562.36.2.1.100.3.8.18.1.2
This attribute specifies the spanning tree protocol state of the bridge port.
OBJECT-TYPE    
  INTEGER disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6)  

mscVrPpSrBpStpTypeOper 1.3.6.1.4.1.562.36.2.1.100.3.8.18.1.3
This attribute specifies the type of spanning tree protocol the port is participating in. A bridge port could participate in either the ieee8021 spanning tree protocol or the dec spanning tree protocol.
OBJECT-TYPE    
  INTEGER none(0), dec(2), ieee8021(3)  

mscVrPpSrBpDesignatedCost 1.3.6.1.4.1.562.36.2.1.100.3.8.18.1.4
This attribute specifies the path cost of the designated port of the lan segment connected to the port.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpSrBpPathCostOper 1.3.6.1.4.1.562.36.2.1.100.3.8.18.1.5
This attribute specifies the contribution of this port, to all the paths to the root bridge that include this port. This attribute pathCostOper will track the value of the attribute pathCostProv when the value of the attribute pathCostMethod is set of off.
OBJECT-TYPE    
  Unsigned32 1..65535  

mscVrPpSrBpDesignatedBridge 1.3.6.1.4.1.562.36.2.1.100.3.8.18.1.6
This attribute specifies the identifier of the bridge that this port considers to be the designated bridge.
OBJECT-TYPE    
  BridgeId SIZE(8)  

mscVrPpSrBpDesignatedPort 1.3.6.1.4.1.562.36.2.1.100.3.8.18.1.7
This attribute specifies the port identifier of the port on the designated bridge, attached to the same lan as this port is attached to.
OBJECT-TYPE    
  Hex 0..65535  

mscVrPpSrBpForwardTransitions 1.3.6.1.4.1.562.36.2.1.100.3.8.18.1.8
This attribute is indicative of the number of times this bridge port transitioned from the learning state to the forwarding state. This counter wraps around its maximum value of 4294967295. A rapidly increasing value might be indicative of an unstable spanning tree topology.
OBJECT-TYPE    
  Counter32  

mscVrPpSrBpBlockingDiscards 1.3.6.1.4.1.562.36.2.1.100.3.8.18.1.9
This attribute is indicative of the number of incoming frames that were discarded because the bridge port was in the blocking state. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpSrBpDesignatedRoot 1.3.6.1.4.1.562.36.2.1.100.3.8.18.1.10
This attribute specifies the bridge identifier of the bridge recorded as the root bridge, in the configuration BPDUs sent out by the designated bridge on the segment to which the port is attached.
OBJECT-TYPE    
  BridgeId SIZE(8)  

mscVrPpSrBpStatsTable 1.3.6.1.4.1.562.36.2.1.100.3.8.19
This group houses all the statistical attributes applicable to all types of bridge ports and represents the common factor between them. These attributes in part reflect the state of the bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrBpStatsEntry

mscVrPpSrBpStatsEntry 1.3.6.1.4.1.562.36.2.1.100.3.8.19.1
An entry in the mscVrPpSrBpStatsTable.
OBJECT-TYPE    
  MscVrPpSrBpStatsEntry  

mscVrPpSrBpBadAbstractDiscards 1.3.6.1.4.1.562.36.2.1.100.3.8.19.1.1
This attribute is indicative of the number of frames that were discarded because the data that was abstracted, from frames coming in through this bridge port, did not conform to the format expected by the bridge logic.This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpSrBpTinygramFramesIn 1.3.6.1.4.1.562.36.2.1.100.3.8.19.1.2
This attribute is indicative of the number of frames received on this bridge port that used the tinygram compression scheme.
OBJECT-TYPE    
  Counter32  

mscVrPpSrBpTinygramFramesOut 1.3.6.1.4.1.562.36.2.1.100.3.8.19.1.3
This attribute is indicative of the number of frames transmitted out this bridge port that used the tinygram compression scheme.
OBJECT-TYPE    
  Counter32  

mscVrPpSrBpInFilterDiscards 1.3.6.1.4.1.562.36.2.1.100.3.8.19.1.4
This attribute is indicative of the number of frames discarded at the in filter point. This includes a) frames discarded due to application of the filter defined with PCF for the in filter point and b) the frames discarded due to domain based filtering at the in filter point. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpSrBpOutFilterDiscards 1.3.6.1.4.1.562.36.2.1.100.3.8.19.1.5
This attribute is indicative of the number of frames discarded at the out filter point. This includes: a) frames discarded due to application of the filter defined with PCF for the out filter point and b) the frames discarded due to domain based filtering at the out filter point. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpSrBpSrProvTable 1.3.6.1.4.1.562.36.2.1.100.3.8.20
This group contains all port specific, provisionable attributes associated with SourceRouteBridge ports.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrBpSrProvEntry

mscVrPpSrBpSrProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.8.20.1
An entry in the mscVrPpSrBpSrProvTable.
OBJECT-TYPE    
  MscVrPpSrBpSrProvEntry  

mscVrPpSrBpHopCount 1.3.6.1.4.1.562.36.2.1.100.3.8.20.1.1
This attribute specifies the maximum number of hops allowed in Spanning Tree Explore and All Routes Explore frames. This value is one less than the maximum number of route descriptors allowed in a source route frame
OBJECT-TYPE    
  Unsigned32 1..7  

mscVrPpSrBpExploreFrameTreatment 1.3.6.1.4.1.562.36.2.1.100.3.8.20.1.2
This attribute specifies whether or not explore frames received from SourceRouteBridge ports will be sent to the SRTB-8209 translation or the encapsulated SourceRouteBridge logic. This option is used only when both the TbsrBridgePort and the SrtbBridgePort are provisioned and enabled. A value of Xlate implies that the explore frames will be sent to the Srtb translation logic and a value of Encap implies that the frames will be sent to the Encapsulated source route bridging logic.
OBJECT-TYPE    
  INTEGER encap(0), xlate(1)  

mscVrPpSrBpLanId 1.3.6.1.4.1.562.36.2.1.100.3.8.20.1.3
This attribute specifies the identifier for the physical LAN that this port is attached. All SourceRouteBridge ports are assigned to a physical LAN and a logical internal LAN. Current source route bridge implementations limit the lanId to a value in the range 0 to 4095.
OBJECT-TYPE    
  Unsigned32 0..4095  

mscVrPpSrBpInternalLanId 1.3.6.1.4.1.562.36.2.1.100.3.8.20.1.4
This attribute specifies the identifier for the internal logical LAN this port is attached. All SourceRouteBridge ports are assigned to a physical LAN and a logical internal LAN. Current source route bridge implementations limit the lanId to a value in the range 0 to 4095.
OBJECT-TYPE    
  Unsigned32 0..4095  

mscVrPpSrBpBridgeNum 1.3.6.1.4.1.562.36.2.1.100.3.8.20.1.5
This attribute specifies the value that is used to identify this bridge when more than one bridge is used to span the same two LAN segments.
OBJECT-TYPE    
  Unsigned32 0..15  

mscVrPpSrBpLargestFrame 1.3.6.1.4.1.562.36.2.1.100.3.8.20.1.6
This attribute specifies the maximum frame size (LLC and above) in octets, allowed by this SourceRouteBridge port. This field is used to determine whether a modification of the largest frame field of the routing control field of the routing information field is warranted.
OBJECT-TYPE    
  Unsigned32 516 | 1470 | 2052 | 4399 | 8130 | 11407 | 17749  

mscVrPpSrBpSteSpanMode 1.3.6.1.4.1.562.36.2.1.100.3.8.20.1.7
This attribute determines how this bridge port will react when presented with a Spanning Tree Explore frame. If disabled, the Spanning Tree Explore frame is discarded regardless of the value of stpPortState. If the value of this attribute is forced, the Spanning Tree Explore frame is forwarded regardless of the value of stpPortState. autoSpan uses the stpPortState value to decide whether or not Spanning Tree Explore frames should be forwarded out this bridge port. If the port is in the forwarding state, the frame is received and transmitted otherwise the frame is discarded.
OBJECT-TYPE    
  INTEGER autoSpan(1), disabled(2), forced(3)  

mscVrPpSrBpAreRdLimit 1.3.6.1.4.1.562.36.2.1.100.3.8.20.1.8
This attribute specifies the number of route descriptors allowed in an All Routes Explore frame received on a SourceRouteBridgePort or SourceRouteTransparentBridgePort. Current source route bridge implementations limit the areRdLimit to a value in the range 0 to 8.
OBJECT-TYPE    
  Unsigned32 0..8  

mscVrPpSrBpSteRdLimit 1.3.6.1.4.1.562.36.2.1.100.3.8.20.1.9
This attribute specifies the number of route descriptors allowed in a Spanning Tree Explore frame received on a SourceRouteBridgePort or SourceRouteTransparentBridgePort. Current source route bridge implementations limit the steRdLimit to a value in the range 0 to 8.
OBJECT-TYPE    
  Unsigned32 0..8  

mscVrPpSrBpSrStatsTable 1.3.6.1.4.1.562.36.2.1.100.3.8.21
This group contains all port specific statistical attributes associated with SourceRouteBridge ports.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrBpSrStatsEntry

mscVrPpSrBpSrStatsEntry 1.3.6.1.4.1.562.36.2.1.100.3.8.21.1
An entry in the mscVrPpSrBpSrStatsTable.
OBJECT-TYPE    
  MscVrPpSrBpSrStatsEntry  

mscVrPpSrBpSpecInFrames 1.3.6.1.4.1.562.36.2.1.100.3.8.21.1.1
This attribute specifies the number of specifically routed frames that were received by this bridge port. A specifically routed frame has a route descriptor, constructed by the originating host which details an explicit route to the destination host. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrBpSpecOutFrames 1.3.6.1.4.1.562.36.2.1.100.3.8.21.1.2
This attribute specifies the number of specifically routed frames that were transmitted from this bridge port. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrBpApeInFrames 1.3.6.1.4.1.562.36.2.1.100.3.8.21.1.3
This attribute specifies the number of All Path Explore frames received on this bridge port. The All Path Explore frames are forwarded to all SourceRouteBridge ports assigned to this bridge regardless of the port's portStpStates. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrBpApeOutFrames 1.3.6.1.4.1.562.36.2.1.100.3.8.21.1.4
This attribute specifies the number of All Path Explore frames transmitted on this bridge port. The All Path Explore frames are forwarded to all SourceRouteBridge ports assigned to this bridge regardless of the port's portStpState state. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrBpSteInFrames 1.3.6.1.4.1.562.36.2.1.100.3.8.21.1.5
This attribute specifies the number of Spanning Tree Explore frames received on this bridge port. The Spanning Tree Explore frames are only forwarded through bridge ports whose portStpState has a value of forwarding. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrBpSteOutFrames 1.3.6.1.4.1.562.36.2.1.100.3.8.21.1.6
This attribute specifies the number of Spanning Tree Frames transmitted on this bridge port. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrBpSegmentMismatchDiscards 1.3.6.1.4.1.562.36.2.1.100.3.8.21.1.7
This attribute specifies the number of All Routes Explore and Spanning Tree Explore frames that were discarded due to an invalid next segment value in the routing information field. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrBpDupSegmentDiscards 1.3.6.1.4.1.562.36.2.1.100.3.8.21.1.8
This attribute specifies the number of frames discarded due to the presence of a duplicate segment identifier in the route descriptor field which may indicate a loop in the network topology. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrBpHopCountExceededDiscards 1.3.6.1.4.1.562.36.2.1.100.3.8.21.1.9
This attribute specifies the number of All Routes Explore and Spanning Tree Explore frames discarded by this bridge port due to a frame exceeding the maximum size allowed for a route descriptor length. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrBpDupLanIdOrTreeErrors 1.3.6.1.4.1.562.36.2.1.100.3.8.21.1.10
This attribute specifies the number frames received which contain duplicate LAN IDs or Tree errors. This attribute is helpful in debugging problems in networks which contain older IBM-SR bridges. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrBpLanIdMismatches 1.3.6.1.4.1.562.36.2.1.100.3.8.21.1.11
This attributes counts the number of All Routes Explore or Spanning Tree Explore frames that were discarded because the last LAN ID in the routing information field did not equal the LAN ID. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrBpStaticDiscards 1.3.6.1.4.1.562.36.2.1.100.3.8.21.1.12
This attribute is indicative of the number of explorer frames discarded due to fact that the outbound SourceRouteBridge port was disabled or deleted. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrBpDynamicDiscards 1.3.6.1.4.1.562.36.2.1.100.3.8.21.1.13
This attribute specifies the number of frames discarded due to receiving a frame with a target LAN ID which did not match the internal LAN ID of the receiving bridge port. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrtBp 1.3.6.1.4.1.562.36.2.1.100.3.9
OBJECT IDENTIFIER    

mscVrPpSrtBpRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.3.9.1
This entry controls the addition and deletion of mscVrPpSrtBp components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrtBpRowStatusEntry

mscVrPpSrtBpRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.3.9.1.1
A single entry in the table represents a single mscVrPpSrtBp component.
OBJECT-TYPE    
  MscVrPpSrtBpRowStatusEntry  

mscVrPpSrtBpRowStatus 1.3.6.1.4.1.562.36.2.1.100.3.9.1.1.1
This variable is used as the basis for SNMP naming of mscVrPpSrtBp components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscVrPpSrtBpComponentName 1.3.6.1.4.1.562.36.2.1.100.3.9.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscVrPpSrtBpStorageType 1.3.6.1.4.1.562.36.2.1.100.3.9.1.1.4
This variable represents the storage type value for the mscVrPpSrtBp tables.
OBJECT-TYPE    
  StorageType  

mscVrPpSrtBpIndex 1.3.6.1.4.1.562.36.2.1.100.3.9.1.1.10
This variable represents the index for the mscVrPpSrtBp tables.
OBJECT-TYPE    
  NonReplicated  

mscVrPpSrtBpNs 1.3.6.1.4.1.562.36.2.1.100.3.9.2
OBJECT IDENTIFIER    

mscVrPpSrtBpNsRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.3.9.2.1
This entry controls the addition and deletion of mscVrPpSrtBpNs components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrtBpNsRowStatusEntry

mscVrPpSrtBpNsRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.3.9.2.1.1
A single entry in the table represents a single mscVrPpSrtBpNs component.
OBJECT-TYPE    
  MscVrPpSrtBpNsRowStatusEntry  

mscVrPpSrtBpNsRowStatus 1.3.6.1.4.1.562.36.2.1.100.3.9.2.1.1.1
This variable is used as the basis for SNMP naming of mscVrPpSrtBpNs components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscVrPpSrtBpNsComponentName 1.3.6.1.4.1.562.36.2.1.100.3.9.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscVrPpSrtBpNsStorageType 1.3.6.1.4.1.562.36.2.1.100.3.9.2.1.1.4
This variable represents the storage type value for the mscVrPpSrtBpNs tables.
OBJECT-TYPE    
  StorageType  

mscVrPpSrtBpNsIndex 1.3.6.1.4.1.562.36.2.1.100.3.9.2.1.1.10
This variable represents the index for the mscVrPpSrtBpNs tables.
OBJECT-TYPE    
  NonReplicated  

mscVrPpSrtBpNsProvTable 1.3.6.1.4.1.562.36.2.1.100.3.9.2.10
This group houses all the port specific provisionable attributes associated with Ns. These attributes influence the application of filters to incoming and outgoing frames.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrtBpNsProvEntry

mscVrPpSrtBpNsProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.9.2.10.1
An entry in the mscVrPpSrtBpNsProvTable.
OBJECT-TYPE    
  MscVrPpSrtBpNsProvEntry  

mscVrPpSrtBpNsIncomingFilter 1.3.6.1.4.1.562.36.2.1.100.3.9.2.10.1.2
This attribute specifies the name of the filter to be applied at the incoming filter point.
OBJECT-TYPE    
  AsciiString SIZE(0..32)  

mscVrPpSrtBpNsOutgoingFilter 1.3.6.1.4.1.562.36.2.1.100.3.9.2.10.1.3
This attribute specifies the name of the filter to be applied at the out going filter point.
OBJECT-TYPE    
  AsciiString SIZE(0..32)  

mscVrPpSrtBpProvTable 1.3.6.1.4.1.562.36.2.1.100.3.9.10
This group houses all the provisionable attributes that belong to the this group. This group of attributes is applicable to all types of bridge ports and represent the common factor between them. These attributes influence the working of a bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrtBpProvEntry

mscVrPpSrtBpProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.9.10.1
An entry in the mscVrPpSrtBpProvTable.
OBJECT-TYPE    
  MscVrPpSrtBpProvEntry  

mscVrPpSrtBpTranslateIpx 1.3.6.1.4.1.562.36.2.1.100.3.9.10.1.1
This attribute specifies the type of translation to be performed on frames carrying IPX packets. Ethernet frames carrying IPX payload could be translated to IEEE 802.3 frames (with the same IPX payload) or vice- versa. The main reason to do so is to allow the bridge unit to consistently forward one type of frames carrying IPX packets. Translations can be turned off altogether in which case the IPX frames will pass through the bridge unit unchanged.
OBJECT-TYPE    
  INTEGER off(0), ieee8023(1), ethernet(2), snap(3), sap(4)  

mscVrPpSrtBpFragmentIp 1.3.6.1.4.1.562.36.2.1.100.3.9.10.1.2
This attribute specifies if or not outbound frames carrying IP datagrams should be fragmented to conform to message transfer unit (mtu) sizes dictated by the media.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpSrtBpServiceClass 1.3.6.1.4.1.562.36.2.1.100.3.9.10.1.3
This attribute specifies if the frames should be ordered or not before they are transmitted through a bridge port. If this attribute has a value of ordered the received frames are ordered as in the original message, before they are transmitted out through a bridge port. If it has a value of notOrdered, received then frames pass through the bridge unit in the order they are received. This feature can be used over multiple telecommunication links to increase data flow. Please note that this attribute only affects link protocols and is ineffective with lan media.
OBJECT-TYPE    
  INTEGER ordered(0), notOrdered(1)  

mscVrPpSrtBpConvertArpMacAddress 1.3.6.1.4.1.562.36.2.1.100.3.9.10.1.4
This attribute is indicative of the state of the MAC address format conversion process for ARP/RARP frames. The MAC addresses may be translated if need be from a canonical format to a non-canonical format, based on the needs of the associated media. If this attribute is set to a value of on then all Mac addresses will converted if need be to suit the format of mac address, the outgoing media will support. If this attribute is set to a value of off no such conversion takes place.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpSrtBpPortNum 1.3.6.1.4.1.562.36.2.1.100.3.9.10.1.5
This attribute is indicative of the unique number assigned to the bridge port. It is used for SNMP management of this bridge port and in spanning tree as an identifier this bridge port. Notes regarding portNum: Escape routines exist for initializing, copying, and deleting port numbers. This is necessary because SNMP requires a unique port instance identifier. The initPortNum escape routine sets the port number to a value in the range 1-255 for this purpose. The setCopiedPortNum escape routine exists to maintain the uniqueness of the port number in cases when one port is copied to another. When a bridge port is deleted, the releasePortNum escape routine places the port number being released into a pending deletion state. This is because the port number cannot be re-allocated until the port is truely deleted in the current view. This is necessary since there is no guarantee of order when processing changes to multiple protocol ports so without the pending deletion state, the same port number could be temporarily assigned to two ports for a short period of time. The portNum is set as component critical since bridging also uses the port number as a key for indexing into its data structures. If a port is deleted then re-added under the same protocol port, CAS treats the change as a SET to the portNum attribute.
OBJECT-TYPE    
  Unsigned32 0..255  

mscVrPpSrtBpTbProvTable 1.3.6.1.4.1.562.36.2.1.100.3.9.11
This group houses all the port specific provisionable attributes that belong to the Tb group. The Tb group is only applicable bridge port types that operate in the TB mode. These attributes in part influence the working of a bridge port operating in the TB mode.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrtBpTbProvEntry

mscVrPpSrtBpTbProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.9.11.1
An entry in the mscVrPpSrtBpTbProvTable.
OBJECT-TYPE    
  MscVrPpSrtBpTbProvEntry  

mscVrPpSrtBpSecureOption 1.3.6.1.4.1.562.36.2.1.100.3.9.11.1.1
This attribute specifies whether the port secure feature is enabled. The secure feature, if enabled causes the following things to happen: a) disallows dynamic learning, b) disallows frames to be forwarded that do not satisfy the following condition: the mac address of the source should be found in the forwarding table and the destination mac address of the frame should also be found in the forwarding table. In addition to this, the port the frame was received on should figure as the in port, given the destination mac address found in the frame. c) disallows frames to be forwarded if the allowed to go port map for the destination mac address is empty. This feature in effect allows the user to choose the hosts that can generate traffic and the hosts that can receive traffic through this bridge unit.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscVrPpSrtBpStpProvTable 1.3.6.1.4.1.562.36.2.1.100.3.9.12
This group houses all the port specific provisionable attributes that belong to the Stp group. The Stp group is applicable to all the bridge ports that participate in the spanning tree protocol. These attributes influence the participation of the bridge port in the spanning tree protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrtBpStpProvEntry

mscVrPpSrtBpStpProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.9.12.1
An entry in the mscVrPpSrtBpStpProvTable.
OBJECT-TYPE    
  MscVrPpSrtBpStpProvEntry  

mscVrPpSrtBpAdminStatus 1.3.6.1.4.1.562.36.2.1.100.3.9.12.1.1
This attribute defines the current administrative state for this component. enabled indicates that the component is available for operation. disabled indicates the component is unavailable for operation.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mscVrPpSrtBpPortStateStpControl 1.3.6.1.4.1.562.36.2.1.100.3.9.12.1.2
This attribute specifies whether or not spanning tree protocol state for this bridge port is controlled by the spanning tree protocol. In essence it indicates the participation of this bridge port in the spanning tree protocol, by accepting and acting on received bridge protocol data units and by sending out the same. on signifies that this bridge port's spanning tree port state is controlled by the spanning tree protocol. A value of off signifies that the spanning tree port state of this bridge port is unaffected by the spanning tree protocol. This in effect puts the bridge port out of reach of the spanning tree protocol and in the forwarding state. Care should be taken while assigning a value of off to this attribute, as this might cause network loops. Please do not set this attribute to off unless you are absolutely sure about the effect of such an action on your network topology.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpSrtBpStpTypeProv 1.3.6.1.4.1.562.36.2.1.100.3.9.12.1.3
This attribute specifies the type of spanning tree protocol the port is participating in. A bridge port could participate in either the ieee8021 spanning tree protocol or the dec spanning tree protocol. If the value of the attribute protocolSpec in the SpanningTreeProtocol component, provisioned under the TransparentBridge component is in conflict with the value of this attribute, the value of the protocolSpec attribute will prevail. Prevailing stp type is reflected in the value of the attribute stpTypeOper.
OBJECT-TYPE    
  INTEGER dec(2), ieee8021(3)  

mscVrPpSrtBpPortPriority 1.3.6.1.4.1.562.36.2.1.100.3.9.12.1.4
This attribute specifies the value for port priority, which is contained in the first octet of the port identifier. Valid values are as follows: 1) 0..255 for stp type DEC and 2) 0..65535 for stp type IEEE.
OBJECT-TYPE    
  Unsigned32 0..65535  

mscVrPpSrtBpPathCost 1.3.6.1.4.1.562.36.2.1.100.3.9.12.1.5
This attribute specifies the contribution of this port, to all the paths to the root bridge that include this port. Please note that the value of the attribute pathCostMethod is applied only when the value of the attribute pathCostMethod is set to on and is ignored if otherwise.
OBJECT-TYPE    
  Unsigned32 1..65535  

mscVrPpSrtBpPathCostMethod 1.3.6.1.4.1.562.36.2.1.100.3.9.12.1.6
This attribute specifies the method used by the bridging logic, to calculate the path cost to the bridge considered to be the root bridge in the spanning tree topology. This attribute should be set to off before attempting to provision a value for pathCostProv.
OBJECT-TYPE    
  INTEGER off(1), dec(2), ieee8021(3)  

mscVrPpSrtBpDIProvTable 1.3.6.1.4.1.562.36.2.1.100.3.9.13
This group houses all the provisionable, domain specific attributes for a non-encapsulating bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrtBpDIProvEntry

mscVrPpSrtBpDIProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.9.13.1
An entry in the mscVrPpSrtBpDIProvTable.
OBJECT-TYPE    
  MscVrPpSrtBpDIProvEntry  

mscVrPpSrtBpDomainNum 1.3.6.1.4.1.562.36.2.1.100.3.9.13.1.1
This attribute specifies the domain number associated with this bridge port. Domain numbers are used for confining frames to a domain. Domain based filtering provides a complete segregation of traffic based on domain number associated with frames. There can exist only sixteen domains when a spanning tree is desired specific to each domain. When there is only a single spanning tree spanning all the domains the maximum number of domains possible are 4294967293. This attribute is of no relevance when associated with backbone bridge port. Its value is ignored in such a situation.
OBJECT-TYPE    
  Unsigned32 1..4294967293  

mscVrPpSrtBpPreserveDomain 1.3.6.1.4.1.562.36.2.1.100.3.9.13.1.2
This attribute specifies if the domain information should be preserved or embedded in the frame header. This attribute applies only to backbone ports and does not affect the access bridge ports. By setting this attribute to a value of on, domain information could be preserved in frames being tunnelled across the a backbone, so that this information can be deciphered at the other end of the backbone tunnel. This preserves the integrity of the domains thus preventing domain breaches while tunnelling frames across backbone network. If the value of this attribute is set to off then domain information is not preserved in the header of the frames tunnelling through the backbone. This eliminates the overhead incurred to preserve domain information across the backbone while tunnelling frames across it. Preserve domain is relevant when used in conjunction with the following media: FDDI, ATM MPE, Frame Relay and PPP. It is ignored when used with other types of media.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpSrtBpStateTable 1.3.6.1.4.1.562.36.2.1.100.3.9.14
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrtBpStateEntry

mscVrPpSrtBpStateEntry 1.3.6.1.4.1.562.36.2.1.100.3.9.14.1
An entry in the mscVrPpSrtBpStateTable.
OBJECT-TYPE    
  MscVrPpSrtBpStateEntry  

mscVrPpSrtBpAdminState 1.3.6.1.4.1.562.36.2.1.100.3.9.14.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscVrPpSrtBpOperationalState 1.3.6.1.4.1.562.36.2.1.100.3.9.14.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscVrPpSrtBpUsageState 1.3.6.1.4.1.562.36.2.1.100.3.9.14.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscVrPpSrtBpOperStatusTable 1.3.6.1.4.1.562.36.2.1.100.3.9.15
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrtBpOperStatusEntry

mscVrPpSrtBpOperStatusEntry 1.3.6.1.4.1.562.36.2.1.100.3.9.15.1
An entry in the mscVrPpSrtBpOperStatusTable.
OBJECT-TYPE    
  MscVrPpSrtBpOperStatusEntry  

mscVrPpSrtBpSnmpOperStatus 1.3.6.1.4.1.562.36.2.1.100.3.9.15.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscVrPpSrtBpOperTable 1.3.6.1.4.1.562.36.2.1.100.3.9.16
This group houses all the operational attributes belonging to the base group. The base group of attributes is applicable to all types of bridge ports and represent the common factor between them. These attributes in part, reflect the state of a bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrtBpOperEntry

mscVrPpSrtBpOperEntry 1.3.6.1.4.1.562.36.2.1.100.3.9.16.1
An entry in the mscVrPpSrtBpOperTable.
OBJECT-TYPE    
  MscVrPpSrtBpOperEntry  

mscVrPpSrtBpPortName 1.3.6.1.4.1.562.36.2.1.100.3.9.16.1.1
The attribute portName is a string of the form 'BridgePortName-i', where BridgePortName is the abbreviation of the corresponding bridge port and i is the instance identifier of the ProtocolPort, the bridge port is provisioned under. For example a TransparentBridgePort provisioned under ProtocolPort/myport would have a name TBP-myport.
OBJECT-TYPE    
  AsciiString SIZE(4..29)  

mscVrPpSrtBpUpTime 1.3.6.1.4.1.562.36.2.1.100.3.9.16.1.3
This attribute specifies the accumulated up time of this bridge port since the last reset occurred.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpSrtBpDownTime 1.3.6.1.4.1.562.36.2.1.100.3.9.16.1.4
This attribute specifies the accumulated down time of this bridge port since the last reset occurred.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpSrtBpBridgingMode 1.3.6.1.4.1.562.36.2.1.100.3.9.16.1.5
This attribute specifies the mode of bridging this port can support. It in turn implies the format of frames, this bridge port can process and forward.
OBJECT-TYPE    
  INTEGER unknown(1), tb(2), sr(3), srt(4)  

mscVrPpSrtBpBridgePortConfig 1.3.6.1.4.1.562.36.2.1.100.3.9.16.1.6
This attribute specifies the bridge port's configuration. It indicates if the bridge port is operating as an access port or as a backbone port. An access bridge port does not encapsulate a MAC frame and does not preserve domain information in the encapsulation, whereas a backbone bridge port encapsulates the MAC frame and optionally preserves domain information in the encapsulated frame.A backbone bridge port is typically used to transport frames across a high bandwidth backbone network to another bridge unit for further processing/forwarding of the frame.
OBJECT-TYPE    
  INTEGER access(1), backbone(2)  

mscVrPpSrtBpBridgePortType 1.3.6.1.4.1.562.36.2.1.100.3.9.16.1.7
This attribute specifies the type of bridge port that was provisioned. It takes into consideration the bridgingMode, bridgePortConfig and the media the bridge port is linked to before branding a bridge port.
OBJECT-TYPE    
  INTEGER ethernetBridgePort(0), tokenRingBridgePort(1), fddiBridgePort(2), tokenBusBridgePort(3), fddiEncapsulatingBridgePort(4), vnsBridgePort(5), frameRelayBridgePort(6), pppBridgePort(7), smdsBridgePort(8), vcpBridgePort(9), x25BridgePort(10), srEncapSrBridgePort(11), srEncapTbBridgePort(12), sourceGateSrBridgePort(13), sourceGateTbBridgePort(14), srtbBridgePort(15), tbsrBridgePort(16), clusterSrBridgePort(17), clusterTbBridgePort(18), unknown(19), atmMpeBridgePort(20), snaDlrBridgePort(21), lanEmulationClientEthernet(22)  

mscVrPpSrtBpIfIndex 1.3.6.1.4.1.562.36.2.1.100.3.9.16.1.8
This attribute specifies the index into the Interface Table where in information about the media interface corresponding to the bridge port is maintained.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscVrPpSrtBpDelayExceededDiscards 1.3.6.1.4.1.562.36.2.1.100.3.9.16.1.10
This attribute is indicative of the number of frames that were discarded because the time taken to process these frames exceeded the transit delay allowed for this bridge unit. This attribute is not supported by bridging and will always have a value of 0.
OBJECT-TYPE    
  Counter32  

mscVrPpSrtBpMtuExceededDiscards 1.3.6.1.4.1.562.36.2.1.100.3.9.16.1.11
This attribute is indicative of the number of frames discarded because the size of the out bound frame exceeded the message transfer unit (mtu) allowed for the bridge port. Note that this counter only refers to the outbound frames for this bridge port. This counter wraps around its maximum value of 4294967295. This counter is influenced by the attribute fragmentIp. This counter is incremented when the a frame larger than the mtu allowed is encountered and cannot be fragmented. If this counter is increasing steadily, it might be useful to set the value of the attribute fragmentIp to a value of on.
OBJECT-TYPE    
  Counter32  

mscVrPpSrtBpTbOperTable 1.3.6.1.4.1.562.36.2.1.100.3.9.17
This group houses all the port specific operational attributes that belong to the Tb group. This group also houses all the port specific statistical attributes that belong to the Tb group. The Tb group is only applicable bridge port types that operate in the TB mode. These attributes reflect the state of a bridge port operating in the TB mode
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrtBpTbOperEntry

mscVrPpSrtBpTbOperEntry 1.3.6.1.4.1.562.36.2.1.100.3.9.17.1
An entry in the mscVrPpSrtBpTbOperTable.
OBJECT-TYPE    
  MscVrPpSrtBpTbOperEntry  

mscVrPpSrtBpMaxInfo 1.3.6.1.4.1.562.36.2.1.100.3.9.17.1.2
This attribute specifies the maximum size of the information field in a TB frame. This excludes the header field.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpSrtBpBadVerifyDiscards 1.3.6.1.4.1.562.36.2.1.100.3.9.17.1.3
This attribute is indicative of the number of incoming frames that were discarded because: a) the value of the secureOption attribute was set to on and b) it is not allowed to receive frames originating from the mac address found in the source address field of the frame (source mac address look up in the forwarding table failed.) on this bridge port. c) for the destination mac address found in the frame, the port the frame was received on does not appear as in port in the corresponding static table entry. Permission to receive frames from a mac address is granted via the static table entries. This attribute, badVerifyDiscards, is directly influenced by: 1. secureOption and 2. the static table entries. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpSrtBpUnicastNoMatches 1.3.6.1.4.1.562.36.2.1.100.3.9.17.1.4
This attribute is indicative of the number frames discarded because the MAC address found in the destination field did not match the local MAC address of the bridge port. This counter is only applicable for the protocols that are being routed currently.This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpSrtBpStaticEntryDiscards 1.3.6.1.4.1.562.36.2.1.100.3.9.17.1.5
This attribute is indicative of the number of frames that were discarded because of the following two reasons: a) there was no entry for the 'allowed to go' field in the static table entry, where the input port is this bridge port. b) for spanning tree bpdus that are locally processed. This counter wraps around its maximum value of 4294967295. It might prove useful to check the static table entry corresponding to the bridge port in question, if this counter consistently displays a high value. Ideally this counter should be as low as possible.
OBJECT-TYPE    
  Counter32  

mscVrPpSrtBpDynamicEntryDiscards 1.3.6.1.4.1.562.36.2.1.100.3.9.17.1.6
This attribute is indicative of the number of incoming frames that a) were discarded because of the fact that the bridge port, the frame is to go out of matches the bridge port it came in from or b) if the stp port state of the out port is not forwarding. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpSrtBpLearningDiscards 1.3.6.1.4.1.562.36.2.1.100.3.9.17.1.7
This attribute is indicative of the number of frames that were discarded while this bridge port was in a state other than the forwarding state. While in learning state the frame is discarded after the information from its header is learnt. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpSrtBpInDiscards 1.3.6.1.4.1.562.36.2.1.100.3.9.17.1.8
This attribute is indicative of the number of frames that were received by this bridge port and were discarded by the forwarding process. This includes frames that could have been discarded due to filtering. A repidly increasing value for this attribute could indicate a shrtage of resource in terms of memory needed to process the incoming frames. More memory can be provisioned through the VirtualRouter's memory manager.
OBJECT-TYPE    
  Counter32  

mscVrPpSrtBpInFrames 1.3.6.1.4.1.562.36.2.1.100.3.9.17.1.9
This attribute is indicative of the number of frames that have been received by this port from its segment. Note that a frame received on this bridge port is counted if and only if it can be processed by the bridge logic contained in this bridge unit, a protocol that can be processed by the bridge logic. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpSrtBpOutFrames 1.3.6.1.4.1.562.36.2.1.100.3.9.17.1.10
This attribute is indicative of the number of frames that have been transmitted out this bridge port. Note that frame transmitted out this bridge port is counted if and only if it is for a protocol being processed by the bridge unit. This also includes management frames.This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpSrtBpStpOperTable 1.3.6.1.4.1.562.36.2.1.100.3.9.18
This group houses all the port specific operational attributes that belong to the Stp group. The Stp group is applicable to all the bridge ports that participate in the spanning tree protocol. These attributes reflect the state of the bridge port's participation in the spanning tree protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrtBpStpOperEntry

mscVrPpSrtBpStpOperEntry 1.3.6.1.4.1.562.36.2.1.100.3.9.18.1
An entry in the mscVrPpSrtBpStpOperTable.
OBJECT-TYPE    
  MscVrPpSrtBpStpOperEntry  

mscVrPpSrtBpStpPortState 1.3.6.1.4.1.562.36.2.1.100.3.9.18.1.2
This attribute specifies the spanning tree protocol state of the bridge port.
OBJECT-TYPE    
  INTEGER disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6)  

mscVrPpSrtBpStpTypeOper 1.3.6.1.4.1.562.36.2.1.100.3.9.18.1.3
This attribute specifies the type of spanning tree protocol the port is participating in. A bridge port could participate in either the ieee8021 spanning tree protocol or the dec spanning tree protocol.
OBJECT-TYPE    
  INTEGER none(0), dec(2), ieee8021(3)  

mscVrPpSrtBpDesignatedCost 1.3.6.1.4.1.562.36.2.1.100.3.9.18.1.4
This attribute specifies the path cost of the designated port of the lan segment connected to the port.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpSrtBpPathCostOper 1.3.6.1.4.1.562.36.2.1.100.3.9.18.1.5
This attribute specifies the contribution of this port, to all the paths to the root bridge that include this port. This attribute pathCostOper will track the value of the attribute pathCostProv when the value of the attribute pathCostMethod is set of off.
OBJECT-TYPE    
  Unsigned32 1..65535  

mscVrPpSrtBpDesignatedBridge 1.3.6.1.4.1.562.36.2.1.100.3.9.18.1.6
This attribute specifies the identifier of the bridge that this port considers to be the designated bridge.
OBJECT-TYPE    
  BridgeId SIZE(8)  

mscVrPpSrtBpDesignatedPort 1.3.6.1.4.1.562.36.2.1.100.3.9.18.1.7
This attribute specifies the port identifier of the port on the designated bridge, attached to the same lan as this port is attached to.
OBJECT-TYPE    
  Hex 0..65535  

mscVrPpSrtBpForwardTransitions 1.3.6.1.4.1.562.36.2.1.100.3.9.18.1.8
This attribute is indicative of the number of times this bridge port transitioned from the learning state to the forwarding state. This counter wraps around its maximum value of 4294967295. A rapidly increasing value might be indicative of an unstable spanning tree topology.
OBJECT-TYPE    
  Counter32  

mscVrPpSrtBpBlockingDiscards 1.3.6.1.4.1.562.36.2.1.100.3.9.18.1.9
This attribute is indicative of the number of incoming frames that were discarded because the bridge port was in the blocking state. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpSrtBpDesignatedRoot 1.3.6.1.4.1.562.36.2.1.100.3.9.18.1.10
This attribute specifies the bridge identifier of the bridge recorded as the root bridge, in the configuration BPDUs sent out by the designated bridge on the segment to which the port is attached.
OBJECT-TYPE    
  BridgeId SIZE(8)  

mscVrPpSrtBpStatsTable 1.3.6.1.4.1.562.36.2.1.100.3.9.19
This group houses all the statistical attributes applicable to all types of bridge ports and represents the common factor between them. These attributes in part reflect the state of the bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrtBpStatsEntry

mscVrPpSrtBpStatsEntry 1.3.6.1.4.1.562.36.2.1.100.3.9.19.1
An entry in the mscVrPpSrtBpStatsTable.
OBJECT-TYPE    
  MscVrPpSrtBpStatsEntry  

mscVrPpSrtBpBadAbstractDiscards 1.3.6.1.4.1.562.36.2.1.100.3.9.19.1.1
This attribute is indicative of the number of frames that were discarded because the data that was abstracted, from frames coming in through this bridge port, did not conform to the format expected by the bridge logic.This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpSrtBpTinygramFramesIn 1.3.6.1.4.1.562.36.2.1.100.3.9.19.1.2
This attribute is indicative of the number of frames received on this bridge port that used the tinygram compression scheme.
OBJECT-TYPE    
  Counter32  

mscVrPpSrtBpTinygramFramesOut 1.3.6.1.4.1.562.36.2.1.100.3.9.19.1.3
This attribute is indicative of the number of frames transmitted out this bridge port that used the tinygram compression scheme.
OBJECT-TYPE    
  Counter32  

mscVrPpSrtBpInFilterDiscards 1.3.6.1.4.1.562.36.2.1.100.3.9.19.1.4
This attribute is indicative of the number of frames discarded at the in filter point. This includes a) frames discarded due to application of the filter defined with PCF for the in filter point and b) the frames discarded due to domain based filtering at the in filter point. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpSrtBpOutFilterDiscards 1.3.6.1.4.1.562.36.2.1.100.3.9.19.1.5
This attribute is indicative of the number of frames discarded at the out filter point. This includes: a) frames discarded due to application of the filter defined with PCF for the out filter point and b) the frames discarded due to domain based filtering at the out filter point. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpSrtBpSrProvTable 1.3.6.1.4.1.562.36.2.1.100.3.9.20
This group contains all port specific, provisionable attributes associated with SourceRouteBridge ports.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrtBpSrProvEntry

mscVrPpSrtBpSrProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.9.20.1
An entry in the mscVrPpSrtBpSrProvTable.
OBJECT-TYPE    
  MscVrPpSrtBpSrProvEntry  

mscVrPpSrtBpHopCount 1.3.6.1.4.1.562.36.2.1.100.3.9.20.1.1
This attribute specifies the maximum number of hops allowed in Spanning Tree Explore and All Routes Explore frames. This value is one less than the maximum number of route descriptors allowed in a source route frame
OBJECT-TYPE    
  Unsigned32 1..7  

mscVrPpSrtBpExploreFrameTreatment 1.3.6.1.4.1.562.36.2.1.100.3.9.20.1.2
This attribute specifies whether or not explore frames received from SourceRouteBridge ports will be sent to the SRTB-8209 translation or the encapsulated SourceRouteBridge logic. This option is used only when both the TbsrBridgePort and the SrtbBridgePort are provisioned and enabled. A value of Xlate implies that the explore frames will be sent to the Srtb translation logic and a value of Encap implies that the frames will be sent to the Encapsulated source route bridging logic.
OBJECT-TYPE    
  INTEGER encap(0), xlate(1)  

mscVrPpSrtBpLanId 1.3.6.1.4.1.562.36.2.1.100.3.9.20.1.3
This attribute specifies the identifier for the physical LAN that this port is attached. All SourceRouteBridge ports are assigned to a physical LAN and a logical internal LAN. Current source route bridge implementations limit the lanId to a value in the range 0 to 4095.
OBJECT-TYPE    
  Unsigned32 0..4095  

mscVrPpSrtBpInternalLanId 1.3.6.1.4.1.562.36.2.1.100.3.9.20.1.4
This attribute specifies the identifier for the internal logical LAN this port is attached. All SourceRouteBridge ports are assigned to a physical LAN and a logical internal LAN. Current source route bridge implementations limit the lanId to a value in the range 0 to 4095.
OBJECT-TYPE    
  Unsigned32 0..4095  

mscVrPpSrtBpBridgeNum 1.3.6.1.4.1.562.36.2.1.100.3.9.20.1.5
This attribute specifies the value that is used to identify this bridge when more than one bridge is used to span the same two LAN segments.
OBJECT-TYPE    
  Unsigned32 0..15  

mscVrPpSrtBpLargestFrame 1.3.6.1.4.1.562.36.2.1.100.3.9.20.1.6
This attribute specifies the maximum frame size (LLC and above) in octets, allowed by this SourceRouteBridge port. This field is used to determine whether a modification of the largest frame field of the routing control field of the routing information field is warranted.
OBJECT-TYPE    
  Unsigned32 516 | 1470 | 2052 | 4399 | 8130 | 11407 | 17749  

mscVrPpSrtBpSteSpanMode 1.3.6.1.4.1.562.36.2.1.100.3.9.20.1.7
This attribute determines how this bridge port will react when presented with a Spanning Tree Explore frame. If disabled, the Spanning Tree Explore frame is discarded regardless of the value of stpPortState. If the value of this attribute is forced, the Spanning Tree Explore frame is forwarded regardless of the value of stpPortState. autoSpan uses the stpPortState value to decide whether or not Spanning Tree Explore frames should be forwarded out this bridge port. If the port is in the forwarding state, the frame is received and transmitted otherwise the frame is discarded.
OBJECT-TYPE    
  INTEGER autoSpan(1), disabled(2), forced(3)  

mscVrPpSrtBpAreRdLimit 1.3.6.1.4.1.562.36.2.1.100.3.9.20.1.8
This attribute specifies the number of route descriptors allowed in an All Routes Explore frame received on a SourceRouteBridgePort or SourceRouteTransparentBridgePort. Current source route bridge implementations limit the areRdLimit to a value in the range 0 to 8.
OBJECT-TYPE    
  Unsigned32 0..8  

mscVrPpSrtBpSteRdLimit 1.3.6.1.4.1.562.36.2.1.100.3.9.20.1.9
This attribute specifies the number of route descriptors allowed in a Spanning Tree Explore frame received on a SourceRouteBridgePort or SourceRouteTransparentBridgePort. Current source route bridge implementations limit the steRdLimit to a value in the range 0 to 8.
OBJECT-TYPE    
  Unsigned32 0..8  

mscVrPpSrtBpSrStatsTable 1.3.6.1.4.1.562.36.2.1.100.3.9.21
This group contains all port specific statistical attributes associated with SourceRouteBridge ports.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrtBpSrStatsEntry

mscVrPpSrtBpSrStatsEntry 1.3.6.1.4.1.562.36.2.1.100.3.9.21.1
An entry in the mscVrPpSrtBpSrStatsTable.
OBJECT-TYPE    
  MscVrPpSrtBpSrStatsEntry  

mscVrPpSrtBpSpecInFrames 1.3.6.1.4.1.562.36.2.1.100.3.9.21.1.1
This attribute specifies the number of specifically routed frames that were received by this bridge port. A specifically routed frame has a route descriptor, constructed by the originating host which details an explicit route to the destination host. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrtBpSpecOutFrames 1.3.6.1.4.1.562.36.2.1.100.3.9.21.1.2
This attribute specifies the number of specifically routed frames that were transmitted from this bridge port. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrtBpApeInFrames 1.3.6.1.4.1.562.36.2.1.100.3.9.21.1.3
This attribute specifies the number of All Path Explore frames received on this bridge port. The All Path Explore frames are forwarded to all SourceRouteBridge ports assigned to this bridge regardless of the port's portStpStates. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrtBpApeOutFrames 1.3.6.1.4.1.562.36.2.1.100.3.9.21.1.4
This attribute specifies the number of All Path Explore frames transmitted on this bridge port. The All Path Explore frames are forwarded to all SourceRouteBridge ports assigned to this bridge regardless of the port's portStpState state. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrtBpSteInFrames 1.3.6.1.4.1.562.36.2.1.100.3.9.21.1.5
This attribute specifies the number of Spanning Tree Explore frames received on this bridge port. The Spanning Tree Explore frames are only forwarded through bridge ports whose portStpState has a value of forwarding. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrtBpSteOutFrames 1.3.6.1.4.1.562.36.2.1.100.3.9.21.1.6
This attribute specifies the number of Spanning Tree Frames transmitted on this bridge port. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrtBpSegmentMismatchDiscards 1.3.6.1.4.1.562.36.2.1.100.3.9.21.1.7
This attribute specifies the number of All Routes Explore and Spanning Tree Explore frames that were discarded due to an invalid next segment value in the routing information field. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrtBpDupSegmentDiscards 1.3.6.1.4.1.562.36.2.1.100.3.9.21.1.8
This attribute specifies the number of frames discarded due to the presence of a duplicate segment identifier in the route descriptor field which may indicate a loop in the network topology. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrtBpHopCountExceededDiscards 1.3.6.1.4.1.562.36.2.1.100.3.9.21.1.9
This attribute specifies the number of All Routes Explore and Spanning Tree Explore frames discarded by this bridge port due to a frame exceeding the maximum size allowed for a route descriptor length. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrtBpDupLanIdOrTreeErrors 1.3.6.1.4.1.562.36.2.1.100.3.9.21.1.10
This attribute specifies the number frames received which contain duplicate LAN IDs or Tree errors. This attribute is helpful in debugging problems in networks which contain older IBM-SR bridges. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrtBpLanIdMismatches 1.3.6.1.4.1.562.36.2.1.100.3.9.21.1.11
This attributes counts the number of All Routes Explore or Spanning Tree Explore frames that were discarded because the last LAN ID in the routing information field did not equal the LAN ID. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrtBpStaticDiscards 1.3.6.1.4.1.562.36.2.1.100.3.9.21.1.12
This attribute is indicative of the number of explorer frames discarded due to fact that the outbound SourceRouteBridge port was disabled or deleted. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrtBpDynamicDiscards 1.3.6.1.4.1.562.36.2.1.100.3.9.21.1.13
This attribute specifies the number of frames discarded due to receiving a frame with a target LAN ID which did not match the internal LAN ID of the receiving bridge port. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrse 1.3.6.1.4.1.562.36.2.1.100.3.10
OBJECT IDENTIFIER    

mscVrPpSrseRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.3.10.1
This entry controls the addition and deletion of mscVrPpSrse components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrseRowStatusEntry

mscVrPpSrseRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.3.10.1.1
A single entry in the table represents a single mscVrPpSrse component.
OBJECT-TYPE    
  MscVrPpSrseRowStatusEntry  

mscVrPpSrseRowStatus 1.3.6.1.4.1.562.36.2.1.100.3.10.1.1.1
This variable is used as the basis for SNMP naming of mscVrPpSrse components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscVrPpSrseComponentName 1.3.6.1.4.1.562.36.2.1.100.3.10.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscVrPpSrseStorageType 1.3.6.1.4.1.562.36.2.1.100.3.10.1.1.4
This variable represents the storage type value for the mscVrPpSrse tables.
OBJECT-TYPE    
  StorageType  

mscVrPpSrseIndex 1.3.6.1.4.1.562.36.2.1.100.3.10.1.1.10
This variable represents the index for the mscVrPpSrse tables.
OBJECT-TYPE    
  NonReplicated  

mscVrPpSrseProvTable 1.3.6.1.4.1.562.36.2.1.100.3.10.10
This group houses all the provisionable attributes that belong to the this group. This group of attributes is applicable to all types of bridge ports and represent the common factor between them. These attributes influence the working of a bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrseProvEntry

mscVrPpSrseProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.10.10.1
An entry in the mscVrPpSrseProvTable.
OBJECT-TYPE    
  MscVrPpSrseProvEntry  

mscVrPpSrseTranslateIpx 1.3.6.1.4.1.562.36.2.1.100.3.10.10.1.1
This attribute specifies the type of translation to be performed on frames carrying IPX packets. Ethernet frames carrying IPX payload could be translated to IEEE 802.3 frames (with the same IPX payload) or vice- versa. The main reason to do so is to allow the bridge unit to consistently forward one type of frames carrying IPX packets. Translations can be turned off altogether in which case the IPX frames will pass through the bridge unit unchanged.
OBJECT-TYPE    
  INTEGER off(0), ieee8023(1), ethernet(2), snap(3), sap(4)  

mscVrPpSrseFragmentIp 1.3.6.1.4.1.562.36.2.1.100.3.10.10.1.2
This attribute specifies if or not outbound frames carrying IP datagrams should be fragmented to conform to message transfer unit (mtu) sizes dictated by the media.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpSrseServiceClass 1.3.6.1.4.1.562.36.2.1.100.3.10.10.1.3
This attribute specifies if the frames should be ordered or not before they are transmitted through a bridge port. If this attribute has a value of ordered the received frames are ordered as in the original message, before they are transmitted out through a bridge port. If it has a value of notOrdered, received then frames pass through the bridge unit in the order they are received. This feature can be used over multiple telecommunication links to increase data flow. Please note that this attribute only affects link protocols and is ineffective with lan media.
OBJECT-TYPE    
  INTEGER ordered(0), notOrdered(1)  

mscVrPpSrseConvertArpMacAddress 1.3.6.1.4.1.562.36.2.1.100.3.10.10.1.4
This attribute is indicative of the state of the MAC address format conversion process for ARP/RARP frames. The MAC addresses may be translated if need be from a canonical format to a non-canonical format, based on the needs of the associated media. If this attribute is set to a value of on then all Mac addresses will converted if need be to suit the format of mac address, the outgoing media will support. If this attribute is set to a value of off no such conversion takes place.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpSrsePortNum 1.3.6.1.4.1.562.36.2.1.100.3.10.10.1.5
This attribute is indicative of the unique number assigned to the bridge port. It is used for SNMP management of this bridge port and in spanning tree as an identifier this bridge port. Notes regarding portNum: Escape routines exist for initializing, copying, and deleting port numbers. This is necessary because SNMP requires a unique port instance identifier. The initPortNum escape routine sets the port number to a value in the range 1-255 for this purpose. The setCopiedPortNum escape routine exists to maintain the uniqueness of the port number in cases when one port is copied to another. When a bridge port is deleted, the releasePortNum escape routine places the port number being released into a pending deletion state. This is because the port number cannot be re-allocated until the port is truely deleted in the current view. This is necessary since there is no guarantee of order when processing changes to multiple protocol ports so without the pending deletion state, the same port number could be temporarily assigned to two ports for a short period of time. The portNum is set as component critical since bridging also uses the port number as a key for indexing into its data structures. If a port is deleted then re-added under the same protocol port, CAS treats the change as a SET to the portNum attribute.
OBJECT-TYPE    
  Unsigned32 0..255  

mscVrPpSrseStpProvTable 1.3.6.1.4.1.562.36.2.1.100.3.10.12
This group houses all the port specific provisionable attributes that belong to the Stp group. The Stp group is applicable to all the bridge ports that participate in the spanning tree protocol. These attributes influence the participation of the bridge port in the spanning tree protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrseStpProvEntry

mscVrPpSrseStpProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.10.12.1
An entry in the mscVrPpSrseStpProvTable.
OBJECT-TYPE    
  MscVrPpSrseStpProvEntry  

mscVrPpSrseAdminStatus 1.3.6.1.4.1.562.36.2.1.100.3.10.12.1.1
This attribute defines the current administrative state for this component. enabled indicates that the component is available for operation. disabled indicates the component is unavailable for operation.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mscVrPpSrsePortStateStpControl 1.3.6.1.4.1.562.36.2.1.100.3.10.12.1.2
This attribute specifies whether or not spanning tree protocol state for this bridge port is controlled by the spanning tree protocol. In essence it indicates the participation of this bridge port in the spanning tree protocol, by accepting and acting on received bridge protocol data units and by sending out the same. on signifies that this bridge port's spanning tree port state is controlled by the spanning tree protocol. A value of off signifies that the spanning tree port state of this bridge port is unaffected by the spanning tree protocol. This in effect puts the bridge port out of reach of the spanning tree protocol and in the forwarding state. Care should be taken while assigning a value of off to this attribute, as this might cause network loops. Please do not set this attribute to off unless you are absolutely sure about the effect of such an action on your network topology.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpSrseStpTypeProv 1.3.6.1.4.1.562.36.2.1.100.3.10.12.1.3
This attribute specifies the type of spanning tree protocol the port is participating in. A bridge port could participate in either the ieee8021 spanning tree protocol or the dec spanning tree protocol. If the value of the attribute protocolSpec in the SpanningTreeProtocol component, provisioned under the TransparentBridge component is in conflict with the value of this attribute, the value of the protocolSpec attribute will prevail. Prevailing stp type is reflected in the value of the attribute stpTypeOper.
OBJECT-TYPE    
  INTEGER dec(2), ieee8021(3)  

mscVrPpSrsePortPriority 1.3.6.1.4.1.562.36.2.1.100.3.10.12.1.4
This attribute specifies the value for port priority, which is contained in the first octet of the port identifier. Valid values are as follows: 1) 0..255 for stp type DEC and 2) 0..65535 for stp type IEEE.
OBJECT-TYPE    
  Unsigned32 0..65535  

mscVrPpSrsePathCost 1.3.6.1.4.1.562.36.2.1.100.3.10.12.1.5
This attribute specifies the contribution of this port, to all the paths to the root bridge that include this port. Please note that the value of the attribute pathCostMethod is applied only when the value of the attribute pathCostMethod is set to on and is ignored if otherwise.
OBJECT-TYPE    
  Unsigned32 1..65535  

mscVrPpSrsePathCostMethod 1.3.6.1.4.1.562.36.2.1.100.3.10.12.1.6
This attribute specifies the method used by the bridging logic, to calculate the path cost to the bridge considered to be the root bridge in the spanning tree topology. This attribute should be set to off before attempting to provision a value for pathCostProv.
OBJECT-TYPE    
  INTEGER off(1), dec(2), ieee8021(3)  

mscVrPpSrseDIProvTable 1.3.6.1.4.1.562.36.2.1.100.3.10.13
This group houses all the provisionable, domain specific attributes for a non-encapsulating bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrseDIProvEntry

mscVrPpSrseDIProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.10.13.1
An entry in the mscVrPpSrseDIProvTable.
OBJECT-TYPE    
  MscVrPpSrseDIProvEntry  

mscVrPpSrseDomainNum 1.3.6.1.4.1.562.36.2.1.100.3.10.13.1.1
This attribute specifies the domain number associated with this bridge port. Domain numbers are used for confining frames to a domain. Domain based filtering provides a complete segregation of traffic based on domain number associated with frames. There can exist only sixteen domains when a spanning tree is desired specific to each domain. When there is only a single spanning tree spanning all the domains the maximum number of domains possible are 4294967293. This attribute is of no relevance when associated with backbone bridge port. Its value is ignored in such a situation.
OBJECT-TYPE    
  Unsigned32 1..4294967293  

mscVrPpSrsePreserveDomain 1.3.6.1.4.1.562.36.2.1.100.3.10.13.1.2
This attribute specifies if the domain information should be preserved or embedded in the frame header. This attribute applies only to backbone ports and does not affect the access bridge ports. By setting this attribute to a value of on, domain information could be preserved in frames being tunnelled across the a backbone, so that this information can be deciphered at the other end of the backbone tunnel. This preserves the integrity of the domains thus preventing domain breaches while tunnelling frames across backbone network. If the value of this attribute is set to off then domain information is not preserved in the header of the frames tunnelling through the backbone. This eliminates the overhead incurred to preserve domain information across the backbone while tunnelling frames across it. Preserve domain is relevant when used in conjunction with the following media: FDDI, ATM MPE, Frame Relay and PPP. It is ignored when used with other types of media.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpSrseStateTable 1.3.6.1.4.1.562.36.2.1.100.3.10.14
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrseStateEntry

mscVrPpSrseStateEntry 1.3.6.1.4.1.562.36.2.1.100.3.10.14.1
An entry in the mscVrPpSrseStateTable.
OBJECT-TYPE    
  MscVrPpSrseStateEntry  

mscVrPpSrseAdminState 1.3.6.1.4.1.562.36.2.1.100.3.10.14.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscVrPpSrseOperationalState 1.3.6.1.4.1.562.36.2.1.100.3.10.14.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscVrPpSrseUsageState 1.3.6.1.4.1.562.36.2.1.100.3.10.14.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscVrPpSrseOperStatusTable 1.3.6.1.4.1.562.36.2.1.100.3.10.15
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrseOperStatusEntry

mscVrPpSrseOperStatusEntry 1.3.6.1.4.1.562.36.2.1.100.3.10.15.1
An entry in the mscVrPpSrseOperStatusTable.
OBJECT-TYPE    
  MscVrPpSrseOperStatusEntry  

mscVrPpSrseSnmpOperStatus 1.3.6.1.4.1.562.36.2.1.100.3.10.15.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscVrPpSrseOperTable 1.3.6.1.4.1.562.36.2.1.100.3.10.16
This group houses all the operational attributes belonging to the base group. The base group of attributes is applicable to all types of bridge ports and represent the common factor between them. These attributes in part, reflect the state of a bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrseOperEntry

mscVrPpSrseOperEntry 1.3.6.1.4.1.562.36.2.1.100.3.10.16.1
An entry in the mscVrPpSrseOperTable.
OBJECT-TYPE    
  MscVrPpSrseOperEntry  

mscVrPpSrsePortName 1.3.6.1.4.1.562.36.2.1.100.3.10.16.1.1
The attribute portName is a string of the form 'BridgePortName-i', where BridgePortName is the abbreviation of the corresponding bridge port and i is the instance identifier of the ProtocolPort, the bridge port is provisioned under. For example a TransparentBridgePort provisioned under ProtocolPort/myport would have a name TBP-myport.
OBJECT-TYPE    
  AsciiString SIZE(4..29)  

mscVrPpSrseUpTime 1.3.6.1.4.1.562.36.2.1.100.3.10.16.1.3
This attribute specifies the accumulated up time of this bridge port since the last reset occurred.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpSrseDownTime 1.3.6.1.4.1.562.36.2.1.100.3.10.16.1.4
This attribute specifies the accumulated down time of this bridge port since the last reset occurred.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpSrseBridgingMode 1.3.6.1.4.1.562.36.2.1.100.3.10.16.1.5
This attribute specifies the mode of bridging this port can support. It in turn implies the format of frames, this bridge port can process and forward.
OBJECT-TYPE    
  INTEGER unknown(1), tb(2), sr(3), srt(4)  

mscVrPpSrseBridgePortConfig 1.3.6.1.4.1.562.36.2.1.100.3.10.16.1.6
This attribute specifies the bridge port's configuration. It indicates if the bridge port is operating as an access port or as a backbone port. An access bridge port does not encapsulate a MAC frame and does not preserve domain information in the encapsulation, whereas a backbone bridge port encapsulates the MAC frame and optionally preserves domain information in the encapsulated frame.A backbone bridge port is typically used to transport frames across a high bandwidth backbone network to another bridge unit for further processing/forwarding of the frame.
OBJECT-TYPE    
  INTEGER access(1), backbone(2)  

mscVrPpSrseBridgePortType 1.3.6.1.4.1.562.36.2.1.100.3.10.16.1.7
This attribute specifies the type of bridge port that was provisioned. It takes into consideration the bridgingMode, bridgePortConfig and the media the bridge port is linked to before branding a bridge port.
OBJECT-TYPE    
  INTEGER ethernetBridgePort(0), tokenRingBridgePort(1), fddiBridgePort(2), tokenBusBridgePort(3), fddiEncapsulatingBridgePort(4), vnsBridgePort(5), frameRelayBridgePort(6), pppBridgePort(7), smdsBridgePort(8), vcpBridgePort(9), x25BridgePort(10), srEncapSrBridgePort(11), srEncapTbBridgePort(12), sourceGateSrBridgePort(13), sourceGateTbBridgePort(14), srtbBridgePort(15), tbsrBridgePort(16), clusterSrBridgePort(17), clusterTbBridgePort(18), unknown(19), atmMpeBridgePort(20), snaDlrBridgePort(21), lanEmulationClientEthernet(22)  

mscVrPpSrseIfIndex 1.3.6.1.4.1.562.36.2.1.100.3.10.16.1.8
This attribute specifies the index into the Interface Table where in information about the media interface corresponding to the bridge port is maintained.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscVrPpSrseDelayExceededDiscards 1.3.6.1.4.1.562.36.2.1.100.3.10.16.1.10
This attribute is indicative of the number of frames that were discarded because the time taken to process these frames exceeded the transit delay allowed for this bridge unit. This attribute is not supported by bridging and will always have a value of 0.
OBJECT-TYPE    
  Counter32  

mscVrPpSrseMtuExceededDiscards 1.3.6.1.4.1.562.36.2.1.100.3.10.16.1.11
This attribute is indicative of the number of frames discarded because the size of the out bound frame exceeded the message transfer unit (mtu) allowed for the bridge port. Note that this counter only refers to the outbound frames for this bridge port. This counter wraps around its maximum value of 4294967295. This counter is influenced by the attribute fragmentIp. This counter is incremented when the a frame larger than the mtu allowed is encountered and cannot be fragmented. If this counter is increasing steadily, it might be useful to set the value of the attribute fragmentIp to a value of on.
OBJECT-TYPE    
  Counter32  

mscVrPpSrseStpOperTable 1.3.6.1.4.1.562.36.2.1.100.3.10.18
This group houses all the port specific operational attributes that belong to the Stp group. The Stp group is applicable to all the bridge ports that participate in the spanning tree protocol. These attributes reflect the state of the bridge port's participation in the spanning tree protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrseStpOperEntry

mscVrPpSrseStpOperEntry 1.3.6.1.4.1.562.36.2.1.100.3.10.18.1
An entry in the mscVrPpSrseStpOperTable.
OBJECT-TYPE    
  MscVrPpSrseStpOperEntry  

mscVrPpSrseStpPortState 1.3.6.1.4.1.562.36.2.1.100.3.10.18.1.2
This attribute specifies the spanning tree protocol state of the bridge port.
OBJECT-TYPE    
  INTEGER disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6)  

mscVrPpSrseStpTypeOper 1.3.6.1.4.1.562.36.2.1.100.3.10.18.1.3
This attribute specifies the type of spanning tree protocol the port is participating in. A bridge port could participate in either the ieee8021 spanning tree protocol or the dec spanning tree protocol.
OBJECT-TYPE    
  INTEGER none(0), dec(2), ieee8021(3)  

mscVrPpSrseDesignatedCost 1.3.6.1.4.1.562.36.2.1.100.3.10.18.1.4
This attribute specifies the path cost of the designated port of the lan segment connected to the port.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpSrsePathCostOper 1.3.6.1.4.1.562.36.2.1.100.3.10.18.1.5
This attribute specifies the contribution of this port, to all the paths to the root bridge that include this port. This attribute pathCostOper will track the value of the attribute pathCostProv when the value of the attribute pathCostMethod is set of off.
OBJECT-TYPE    
  Unsigned32 1..65535  

mscVrPpSrseDesignatedBridge 1.3.6.1.4.1.562.36.2.1.100.3.10.18.1.6
This attribute specifies the identifier of the bridge that this port considers to be the designated bridge.
OBJECT-TYPE    
  BridgeId SIZE(8)  

mscVrPpSrseDesignatedPort 1.3.6.1.4.1.562.36.2.1.100.3.10.18.1.7
This attribute specifies the port identifier of the port on the designated bridge, attached to the same lan as this port is attached to.
OBJECT-TYPE    
  Hex 0..65535  

mscVrPpSrseForwardTransitions 1.3.6.1.4.1.562.36.2.1.100.3.10.18.1.8
This attribute is indicative of the number of times this bridge port transitioned from the learning state to the forwarding state. This counter wraps around its maximum value of 4294967295. A rapidly increasing value might be indicative of an unstable spanning tree topology.
OBJECT-TYPE    
  Counter32  

mscVrPpSrseBlockingDiscards 1.3.6.1.4.1.562.36.2.1.100.3.10.18.1.9
This attribute is indicative of the number of incoming frames that were discarded because the bridge port was in the blocking state. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpSrseDesignatedRoot 1.3.6.1.4.1.562.36.2.1.100.3.10.18.1.10
This attribute specifies the bridge identifier of the bridge recorded as the root bridge, in the configuration BPDUs sent out by the designated bridge on the segment to which the port is attached.
OBJECT-TYPE    
  BridgeId SIZE(8)  

mscVrPpSrseStatsTable 1.3.6.1.4.1.562.36.2.1.100.3.10.19
This group houses all the statistical attributes applicable to all types of bridge ports and represents the common factor between them. These attributes in part reflect the state of the bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrseStatsEntry

mscVrPpSrseStatsEntry 1.3.6.1.4.1.562.36.2.1.100.3.10.19.1
An entry in the mscVrPpSrseStatsTable.
OBJECT-TYPE    
  MscVrPpSrseStatsEntry  

mscVrPpSrseBadAbstractDiscards 1.3.6.1.4.1.562.36.2.1.100.3.10.19.1.1
This attribute is indicative of the number of frames that were discarded because the data that was abstracted, from frames coming in through this bridge port, did not conform to the format expected by the bridge logic.This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpSrseTinygramFramesIn 1.3.6.1.4.1.562.36.2.1.100.3.10.19.1.2
This attribute is indicative of the number of frames received on this bridge port that used the tinygram compression scheme.
OBJECT-TYPE    
  Counter32  

mscVrPpSrseTinygramFramesOut 1.3.6.1.4.1.562.36.2.1.100.3.10.19.1.3
This attribute is indicative of the number of frames transmitted out this bridge port that used the tinygram compression scheme.
OBJECT-TYPE    
  Counter32  

mscVrPpSrseInFilterDiscards 1.3.6.1.4.1.562.36.2.1.100.3.10.19.1.4
This attribute is indicative of the number of frames discarded at the in filter point. This includes a) frames discarded due to application of the filter defined with PCF for the in filter point and b) the frames discarded due to domain based filtering at the in filter point. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpSrseOutFilterDiscards 1.3.6.1.4.1.562.36.2.1.100.3.10.19.1.5
This attribute is indicative of the number of frames discarded at the out filter point. This includes: a) frames discarded due to application of the filter defined with PCF for the out filter point and b) the frames discarded due to domain based filtering at the out filter point. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpSrseSrProvTable 1.3.6.1.4.1.562.36.2.1.100.3.10.20
This group contains all port specific, provisionable attributes associated with SourceRouteBridge ports.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrseSrProvEntry

mscVrPpSrseSrProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.10.20.1
An entry in the mscVrPpSrseSrProvTable.
OBJECT-TYPE    
  MscVrPpSrseSrProvEntry  

mscVrPpSrseHopCount 1.3.6.1.4.1.562.36.2.1.100.3.10.20.1.1
This attribute specifies the maximum number of hops allowed in Spanning Tree Explore and All Routes Explore frames. This value is one less than the maximum number of route descriptors allowed in a source route frame
OBJECT-TYPE    
  Unsigned32 1..7  

mscVrPpSrseExploreFrameTreatment 1.3.6.1.4.1.562.36.2.1.100.3.10.20.1.2
This attribute specifies whether or not explore frames received from SourceRouteBridge ports will be sent to the SRTB-8209 translation or the encapsulated SourceRouteBridge logic. This option is used only when both the TbsrBridgePort and the SrtbBridgePort are provisioned and enabled. A value of Xlate implies that the explore frames will be sent to the Srtb translation logic and a value of Encap implies that the frames will be sent to the Encapsulated source route bridging logic.
OBJECT-TYPE    
  INTEGER encap(0), xlate(1)  

mscVrPpSrseLanId 1.3.6.1.4.1.562.36.2.1.100.3.10.20.1.3
This attribute specifies the identifier for the physical LAN that this port is attached. All SourceRouteBridge ports are assigned to a physical LAN and a logical internal LAN. Current source route bridge implementations limit the lanId to a value in the range 0 to 4095.
OBJECT-TYPE    
  Unsigned32 0..4095  

mscVrPpSrseInternalLanId 1.3.6.1.4.1.562.36.2.1.100.3.10.20.1.4
This attribute specifies the identifier for the internal logical LAN this port is attached. All SourceRouteBridge ports are assigned to a physical LAN and a logical internal LAN. Current source route bridge implementations limit the lanId to a value in the range 0 to 4095.
OBJECT-TYPE    
  Unsigned32 0..4095  

mscVrPpSrseBridgeNum 1.3.6.1.4.1.562.36.2.1.100.3.10.20.1.5
This attribute specifies the value that is used to identify this bridge when more than one bridge is used to span the same two LAN segments.
OBJECT-TYPE    
  Unsigned32 0..15  

mscVrPpSrseLargestFrame 1.3.6.1.4.1.562.36.2.1.100.3.10.20.1.6
This attribute specifies the maximum frame size (LLC and above) in octets, allowed by this SourceRouteBridge port. This field is used to determine whether a modification of the largest frame field of the routing control field of the routing information field is warranted.
OBJECT-TYPE    
  Unsigned32 516 | 1470 | 2052 | 4399 | 8130 | 11407 | 17749  

mscVrPpSrseSteSpanMode 1.3.6.1.4.1.562.36.2.1.100.3.10.20.1.7
This attribute determines how this bridge port will react when presented with a Spanning Tree Explore frame. If disabled, the Spanning Tree Explore frame is discarded regardless of the value of stpPortState. If the value of this attribute is forced, the Spanning Tree Explore frame is forwarded regardless of the value of stpPortState. autoSpan uses the stpPortState value to decide whether or not Spanning Tree Explore frames should be forwarded out this bridge port. If the port is in the forwarding state, the frame is received and transmitted otherwise the frame is discarded.
OBJECT-TYPE    
  INTEGER autoSpan(1), disabled(2), forced(3)  

mscVrPpSrseAreRdLimit 1.3.6.1.4.1.562.36.2.1.100.3.10.20.1.8
This attribute specifies the number of route descriptors allowed in an All Routes Explore frame received on a SourceRouteBridgePort or SourceRouteTransparentBridgePort. Current source route bridge implementations limit the areRdLimit to a value in the range 0 to 8.
OBJECT-TYPE    
  Unsigned32 0..8  

mscVrPpSrseSteRdLimit 1.3.6.1.4.1.562.36.2.1.100.3.10.20.1.9
This attribute specifies the number of route descriptors allowed in a Spanning Tree Explore frame received on a SourceRouteBridgePort or SourceRouteTransparentBridgePort. Current source route bridge implementations limit the steRdLimit to a value in the range 0 to 8.
OBJECT-TYPE    
  Unsigned32 0..8  

mscVrPpSrseSrStatsTable 1.3.6.1.4.1.562.36.2.1.100.3.10.21
This group contains all port specific statistical attributes associated with SourceRouteBridge ports.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrseSrStatsEntry

mscVrPpSrseSrStatsEntry 1.3.6.1.4.1.562.36.2.1.100.3.10.21.1
An entry in the mscVrPpSrseSrStatsTable.
OBJECT-TYPE    
  MscVrPpSrseSrStatsEntry  

mscVrPpSrseSpecInFrames 1.3.6.1.4.1.562.36.2.1.100.3.10.21.1.1
This attribute specifies the number of specifically routed frames that were received by this bridge port. A specifically routed frame has a route descriptor, constructed by the originating host which details an explicit route to the destination host. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrseSpecOutFrames 1.3.6.1.4.1.562.36.2.1.100.3.10.21.1.2
This attribute specifies the number of specifically routed frames that were transmitted from this bridge port. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrseApeInFrames 1.3.6.1.4.1.562.36.2.1.100.3.10.21.1.3
This attribute specifies the number of All Path Explore frames received on this bridge port. The All Path Explore frames are forwarded to all SourceRouteBridge ports assigned to this bridge regardless of the port's portStpStates. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrseApeOutFrames 1.3.6.1.4.1.562.36.2.1.100.3.10.21.1.4
This attribute specifies the number of All Path Explore frames transmitted on this bridge port. The All Path Explore frames are forwarded to all SourceRouteBridge ports assigned to this bridge regardless of the port's portStpState state. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrseSteInFrames 1.3.6.1.4.1.562.36.2.1.100.3.10.21.1.5
This attribute specifies the number of Spanning Tree Explore frames received on this bridge port. The Spanning Tree Explore frames are only forwarded through bridge ports whose portStpState has a value of forwarding. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrseSteOutFrames 1.3.6.1.4.1.562.36.2.1.100.3.10.21.1.6
This attribute specifies the number of Spanning Tree Frames transmitted on this bridge port. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrseSegmentMismatchDiscards 1.3.6.1.4.1.562.36.2.1.100.3.10.21.1.7
This attribute specifies the number of All Routes Explore and Spanning Tree Explore frames that were discarded due to an invalid next segment value in the routing information field. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrseDupSegmentDiscards 1.3.6.1.4.1.562.36.2.1.100.3.10.21.1.8
This attribute specifies the number of frames discarded due to the presence of a duplicate segment identifier in the route descriptor field which may indicate a loop in the network topology. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrseHopCountExceededDiscards 1.3.6.1.4.1.562.36.2.1.100.3.10.21.1.9
This attribute specifies the number of All Routes Explore and Spanning Tree Explore frames discarded by this bridge port due to a frame exceeding the maximum size allowed for a route descriptor length. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrseDupLanIdOrTreeErrors 1.3.6.1.4.1.562.36.2.1.100.3.10.21.1.10
This attribute specifies the number frames received which contain duplicate LAN IDs or Tree errors. This attribute is helpful in debugging problems in networks which contain older IBM-SR bridges. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrseLanIdMismatches 1.3.6.1.4.1.562.36.2.1.100.3.10.21.1.11
This attributes counts the number of All Routes Explore or Spanning Tree Explore frames that were discarded because the last LAN ID in the routing information field did not equal the LAN ID. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrseStaticDiscards 1.3.6.1.4.1.562.36.2.1.100.3.10.21.1.12
This attribute is indicative of the number of explorer frames discarded due to fact that the outbound SourceRouteBridge port was disabled or deleted. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrseDynamicDiscards 1.3.6.1.4.1.562.36.2.1.100.3.10.21.1.13
This attribute specifies the number of frames discarded due to receiving a frame with a target LAN ID which did not match the internal LAN ID of the receiving bridge port. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpTbse 1.3.6.1.4.1.562.36.2.1.100.3.11
OBJECT IDENTIFIER    

mscVrPpTbseRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.3.11.1
This entry controls the addition and deletion of mscVrPpTbse components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbseRowStatusEntry

mscVrPpTbseRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.3.11.1.1
A single entry in the table represents a single mscVrPpTbse component.
OBJECT-TYPE    
  MscVrPpTbseRowStatusEntry  

mscVrPpTbseRowStatus 1.3.6.1.4.1.562.36.2.1.100.3.11.1.1.1
This variable is used as the basis for SNMP naming of mscVrPpTbse components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscVrPpTbseComponentName 1.3.6.1.4.1.562.36.2.1.100.3.11.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscVrPpTbseStorageType 1.3.6.1.4.1.562.36.2.1.100.3.11.1.1.4
This variable represents the storage type value for the mscVrPpTbse tables.
OBJECT-TYPE    
  StorageType  

mscVrPpTbseIndex 1.3.6.1.4.1.562.36.2.1.100.3.11.1.1.10
This variable represents the index for the mscVrPpTbse tables.
OBJECT-TYPE    
  NonReplicated  

mscVrPpTbseProvTable 1.3.6.1.4.1.562.36.2.1.100.3.11.10
This group houses all the provisionable attributes that belong to the this group. This group of attributes is applicable to all types of bridge ports and represent the common factor between them. These attributes influence the working of a bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbseProvEntry

mscVrPpTbseProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.11.10.1
An entry in the mscVrPpTbseProvTable.
OBJECT-TYPE    
  MscVrPpTbseProvEntry  

mscVrPpTbseTranslateIpx 1.3.6.1.4.1.562.36.2.1.100.3.11.10.1.1
This attribute specifies the type of translation to be performed on frames carrying IPX packets. Ethernet frames carrying IPX payload could be translated to IEEE 802.3 frames (with the same IPX payload) or vice- versa. The main reason to do so is to allow the bridge unit to consistently forward one type of frames carrying IPX packets. Translations can be turned off altogether in which case the IPX frames will pass through the bridge unit unchanged.
OBJECT-TYPE    
  INTEGER off(0), ieee8023(1), ethernet(2), snap(3), sap(4)  

mscVrPpTbseFragmentIp 1.3.6.1.4.1.562.36.2.1.100.3.11.10.1.2
This attribute specifies if or not outbound frames carrying IP datagrams should be fragmented to conform to message transfer unit (mtu) sizes dictated by the media.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpTbseServiceClass 1.3.6.1.4.1.562.36.2.1.100.3.11.10.1.3
This attribute specifies if the frames should be ordered or not before they are transmitted through a bridge port. If this attribute has a value of ordered the received frames are ordered as in the original message, before they are transmitted out through a bridge port. If it has a value of notOrdered, received then frames pass through the bridge unit in the order they are received. This feature can be used over multiple telecommunication links to increase data flow. Please note that this attribute only affects link protocols and is ineffective with lan media.
OBJECT-TYPE    
  INTEGER ordered(0), notOrdered(1)  

mscVrPpTbseConvertArpMacAddress 1.3.6.1.4.1.562.36.2.1.100.3.11.10.1.4
This attribute is indicative of the state of the MAC address format conversion process for ARP/RARP frames. The MAC addresses may be translated if need be from a canonical format to a non-canonical format, based on the needs of the associated media. If this attribute is set to a value of on then all Mac addresses will converted if need be to suit the format of mac address, the outgoing media will support. If this attribute is set to a value of off no such conversion takes place.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpTbsePortNum 1.3.6.1.4.1.562.36.2.1.100.3.11.10.1.5
This attribute is indicative of the unique number assigned to the bridge port. It is used for SNMP management of this bridge port and in spanning tree as an identifier this bridge port. Notes regarding portNum: Escape routines exist for initializing, copying, and deleting port numbers. This is necessary because SNMP requires a unique port instance identifier. The initPortNum escape routine sets the port number to a value in the range 1-255 for this purpose. The setCopiedPortNum escape routine exists to maintain the uniqueness of the port number in cases when one port is copied to another. When a bridge port is deleted, the releasePortNum escape routine places the port number being released into a pending deletion state. This is because the port number cannot be re-allocated until the port is truely deleted in the current view. This is necessary since there is no guarantee of order when processing changes to multiple protocol ports so without the pending deletion state, the same port number could be temporarily assigned to two ports for a short period of time. The portNum is set as component critical since bridging also uses the port number as a key for indexing into its data structures. If a port is deleted then re-added under the same protocol port, CAS treats the change as a SET to the portNum attribute.
OBJECT-TYPE    
  Unsigned32 0..255  

mscVrPpTbseTbProvTable 1.3.6.1.4.1.562.36.2.1.100.3.11.11
This group houses all the port specific provisionable attributes that belong to the Tb group. The Tb group is only applicable bridge port types that operate in the TB mode. These attributes in part influence the working of a bridge port operating in the TB mode.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbseTbProvEntry

mscVrPpTbseTbProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.11.11.1
An entry in the mscVrPpTbseTbProvTable.
OBJECT-TYPE    
  MscVrPpTbseTbProvEntry  

mscVrPpTbseSecureOption 1.3.6.1.4.1.562.36.2.1.100.3.11.11.1.1
This attribute specifies whether the port secure feature is enabled. The secure feature, if enabled causes the following things to happen: a) disallows dynamic learning, b) disallows frames to be forwarded that do not satisfy the following condition: the mac address of the source should be found in the forwarding table and the destination mac address of the frame should also be found in the forwarding table. In addition to this, the port the frame was received on should figure as the in port, given the destination mac address found in the frame. c) disallows frames to be forwarded if the allowed to go port map for the destination mac address is empty. This feature in effect allows the user to choose the hosts that can generate traffic and the hosts that can receive traffic through this bridge unit.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscVrPpTbseStpProvTable 1.3.6.1.4.1.562.36.2.1.100.3.11.12
This group houses all the port specific provisionable attributes that belong to the Stp group. The Stp group is applicable to all the bridge ports that participate in the spanning tree protocol. These attributes influence the participation of the bridge port in the spanning tree protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbseStpProvEntry

mscVrPpTbseStpProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.11.12.1
An entry in the mscVrPpTbseStpProvTable.
OBJECT-TYPE    
  MscVrPpTbseStpProvEntry  

mscVrPpTbseAdminStatus 1.3.6.1.4.1.562.36.2.1.100.3.11.12.1.1
This attribute defines the current administrative state for this component. enabled indicates that the component is available for operation. disabled indicates the component is unavailable for operation.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mscVrPpTbsePortStateStpControl 1.3.6.1.4.1.562.36.2.1.100.3.11.12.1.2
This attribute specifies whether or not spanning tree protocol state for this bridge port is controlled by the spanning tree protocol. In essence it indicates the participation of this bridge port in the spanning tree protocol, by accepting and acting on received bridge protocol data units and by sending out the same. on signifies that this bridge port's spanning tree port state is controlled by the spanning tree protocol. A value of off signifies that the spanning tree port state of this bridge port is unaffected by the spanning tree protocol. This in effect puts the bridge port out of reach of the spanning tree protocol and in the forwarding state. Care should be taken while assigning a value of off to this attribute, as this might cause network loops. Please do not set this attribute to off unless you are absolutely sure about the effect of such an action on your network topology.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpTbseStpTypeProv 1.3.6.1.4.1.562.36.2.1.100.3.11.12.1.3
This attribute specifies the type of spanning tree protocol the port is participating in. A bridge port could participate in either the ieee8021 spanning tree protocol or the dec spanning tree protocol. If the value of the attribute protocolSpec in the SpanningTreeProtocol component, provisioned under the TransparentBridge component is in conflict with the value of this attribute, the value of the protocolSpec attribute will prevail. Prevailing stp type is reflected in the value of the attribute stpTypeOper.
OBJECT-TYPE    
  INTEGER dec(2), ieee8021(3)  

mscVrPpTbsePortPriority 1.3.6.1.4.1.562.36.2.1.100.3.11.12.1.4
This attribute specifies the value for port priority, which is contained in the first octet of the port identifier. Valid values are as follows: 1) 0..255 for stp type DEC and 2) 0..65535 for stp type IEEE.
OBJECT-TYPE    
  Unsigned32 0..65535  

mscVrPpTbsePathCost 1.3.6.1.4.1.562.36.2.1.100.3.11.12.1.5
This attribute specifies the contribution of this port, to all the paths to the root bridge that include this port. Please note that the value of the attribute pathCostMethod is applied only when the value of the attribute pathCostMethod is set to on and is ignored if otherwise.
OBJECT-TYPE    
  Unsigned32 1..65535  

mscVrPpTbsePathCostMethod 1.3.6.1.4.1.562.36.2.1.100.3.11.12.1.6
This attribute specifies the method used by the bridging logic, to calculate the path cost to the bridge considered to be the root bridge in the spanning tree topology. This attribute should be set to off before attempting to provision a value for pathCostProv.
OBJECT-TYPE    
  INTEGER off(1), dec(2), ieee8021(3)  

mscVrPpTbseDIProvTable 1.3.6.1.4.1.562.36.2.1.100.3.11.13
This group houses all the provisionable, domain specific attributes for a non-encapsulating bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbseDIProvEntry

mscVrPpTbseDIProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.11.13.1
An entry in the mscVrPpTbseDIProvTable.
OBJECT-TYPE    
  MscVrPpTbseDIProvEntry  

mscVrPpTbseDomainNum 1.3.6.1.4.1.562.36.2.1.100.3.11.13.1.1
This attribute specifies the domain number associated with this bridge port. Domain numbers are used for confining frames to a domain. Domain based filtering provides a complete segregation of traffic based on domain number associated with frames. There can exist only sixteen domains when a spanning tree is desired specific to each domain. When there is only a single spanning tree spanning all the domains the maximum number of domains possible are 4294967293. This attribute is of no relevance when associated with backbone bridge port. Its value is ignored in such a situation.
OBJECT-TYPE    
  Unsigned32 1..4294967293  

mscVrPpTbsePreserveDomain 1.3.6.1.4.1.562.36.2.1.100.3.11.13.1.2
This attribute specifies if the domain information should be preserved or embedded in the frame header. This attribute applies only to backbone ports and does not affect the access bridge ports. By setting this attribute to a value of on, domain information could be preserved in frames being tunnelled across the a backbone, so that this information can be deciphered at the other end of the backbone tunnel. This preserves the integrity of the domains thus preventing domain breaches while tunnelling frames across backbone network. If the value of this attribute is set to off then domain information is not preserved in the header of the frames tunnelling through the backbone. This eliminates the overhead incurred to preserve domain information across the backbone while tunnelling frames across it. Preserve domain is relevant when used in conjunction with the following media: FDDI, ATM MPE, Frame Relay and PPP. It is ignored when used with other types of media.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpTbseStateTable 1.3.6.1.4.1.562.36.2.1.100.3.11.14
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbseStateEntry

mscVrPpTbseStateEntry 1.3.6.1.4.1.562.36.2.1.100.3.11.14.1
An entry in the mscVrPpTbseStateTable.
OBJECT-TYPE    
  MscVrPpTbseStateEntry  

mscVrPpTbseAdminState 1.3.6.1.4.1.562.36.2.1.100.3.11.14.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscVrPpTbseOperationalState 1.3.6.1.4.1.562.36.2.1.100.3.11.14.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscVrPpTbseUsageState 1.3.6.1.4.1.562.36.2.1.100.3.11.14.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscVrPpTbseOperStatusTable 1.3.6.1.4.1.562.36.2.1.100.3.11.15
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbseOperStatusEntry

mscVrPpTbseOperStatusEntry 1.3.6.1.4.1.562.36.2.1.100.3.11.15.1
An entry in the mscVrPpTbseOperStatusTable.
OBJECT-TYPE    
  MscVrPpTbseOperStatusEntry  

mscVrPpTbseSnmpOperStatus 1.3.6.1.4.1.562.36.2.1.100.3.11.15.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscVrPpTbseOperTable 1.3.6.1.4.1.562.36.2.1.100.3.11.16
This group houses all the operational attributes belonging to the base group. The base group of attributes is applicable to all types of bridge ports and represent the common factor between them. These attributes in part, reflect the state of a bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbseOperEntry

mscVrPpTbseOperEntry 1.3.6.1.4.1.562.36.2.1.100.3.11.16.1
An entry in the mscVrPpTbseOperTable.
OBJECT-TYPE    
  MscVrPpTbseOperEntry  

mscVrPpTbsePortName 1.3.6.1.4.1.562.36.2.1.100.3.11.16.1.1
The attribute portName is a string of the form 'BridgePortName-i', where BridgePortName is the abbreviation of the corresponding bridge port and i is the instance identifier of the ProtocolPort, the bridge port is provisioned under. For example a TransparentBridgePort provisioned under ProtocolPort/myport would have a name TBP-myport.
OBJECT-TYPE    
  AsciiString SIZE(4..29)  

mscVrPpTbseUpTime 1.3.6.1.4.1.562.36.2.1.100.3.11.16.1.3
This attribute specifies the accumulated up time of this bridge port since the last reset occurred.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpTbseDownTime 1.3.6.1.4.1.562.36.2.1.100.3.11.16.1.4
This attribute specifies the accumulated down time of this bridge port since the last reset occurred.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpTbseBridgingMode 1.3.6.1.4.1.562.36.2.1.100.3.11.16.1.5
This attribute specifies the mode of bridging this port can support. It in turn implies the format of frames, this bridge port can process and forward.
OBJECT-TYPE    
  INTEGER unknown(1), tb(2), sr(3), srt(4)  

mscVrPpTbseBridgePortConfig 1.3.6.1.4.1.562.36.2.1.100.3.11.16.1.6
This attribute specifies the bridge port's configuration. It indicates if the bridge port is operating as an access port or as a backbone port. An access bridge port does not encapsulate a MAC frame and does not preserve domain information in the encapsulation, whereas a backbone bridge port encapsulates the MAC frame and optionally preserves domain information in the encapsulated frame.A backbone bridge port is typically used to transport frames across a high bandwidth backbone network to another bridge unit for further processing/forwarding of the frame.
OBJECT-TYPE    
  INTEGER access(1), backbone(2)  

mscVrPpTbseBridgePortType 1.3.6.1.4.1.562.36.2.1.100.3.11.16.1.7
This attribute specifies the type of bridge port that was provisioned. It takes into consideration the bridgingMode, bridgePortConfig and the media the bridge port is linked to before branding a bridge port.
OBJECT-TYPE    
  INTEGER ethernetBridgePort(0), tokenRingBridgePort(1), fddiBridgePort(2), tokenBusBridgePort(3), fddiEncapsulatingBridgePort(4), vnsBridgePort(5), frameRelayBridgePort(6), pppBridgePort(7), smdsBridgePort(8), vcpBridgePort(9), x25BridgePort(10), srEncapSrBridgePort(11), srEncapTbBridgePort(12), sourceGateSrBridgePort(13), sourceGateTbBridgePort(14), srtbBridgePort(15), tbsrBridgePort(16), clusterSrBridgePort(17), clusterTbBridgePort(18), unknown(19), atmMpeBridgePort(20), snaDlrBridgePort(21), lanEmulationClientEthernet(22)  

mscVrPpTbseIfIndex 1.3.6.1.4.1.562.36.2.1.100.3.11.16.1.8
This attribute specifies the index into the Interface Table where in information about the media interface corresponding to the bridge port is maintained.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscVrPpTbseDelayExceededDiscards 1.3.6.1.4.1.562.36.2.1.100.3.11.16.1.10
This attribute is indicative of the number of frames that were discarded because the time taken to process these frames exceeded the transit delay allowed for this bridge unit. This attribute is not supported by bridging and will always have a value of 0.
OBJECT-TYPE    
  Counter32  

mscVrPpTbseMtuExceededDiscards 1.3.6.1.4.1.562.36.2.1.100.3.11.16.1.11
This attribute is indicative of the number of frames discarded because the size of the out bound frame exceeded the message transfer unit (mtu) allowed for the bridge port. Note that this counter only refers to the outbound frames for this bridge port. This counter wraps around its maximum value of 4294967295. This counter is influenced by the attribute fragmentIp. This counter is incremented when the a frame larger than the mtu allowed is encountered and cannot be fragmented. If this counter is increasing steadily, it might be useful to set the value of the attribute fragmentIp to a value of on.
OBJECT-TYPE    
  Counter32  

mscVrPpTbseTbOperTable 1.3.6.1.4.1.562.36.2.1.100.3.11.17
This group houses all the port specific operational attributes that belong to the Tb group. This group also houses all the port specific statistical attributes that belong to the Tb group. The Tb group is only applicable bridge port types that operate in the TB mode. These attributes reflect the state of a bridge port operating in the TB mode
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbseTbOperEntry

mscVrPpTbseTbOperEntry 1.3.6.1.4.1.562.36.2.1.100.3.11.17.1
An entry in the mscVrPpTbseTbOperTable.
OBJECT-TYPE    
  MscVrPpTbseTbOperEntry  

mscVrPpTbseMaxInfo 1.3.6.1.4.1.562.36.2.1.100.3.11.17.1.2
This attribute specifies the maximum size of the information field in a TB frame. This excludes the header field.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpTbseBadVerifyDiscards 1.3.6.1.4.1.562.36.2.1.100.3.11.17.1.3
This attribute is indicative of the number of incoming frames that were discarded because: a) the value of the secureOption attribute was set to on and b) it is not allowed to receive frames originating from the mac address found in the source address field of the frame (source mac address look up in the forwarding table failed.) on this bridge port. c) for the destination mac address found in the frame, the port the frame was received on does not appear as in port in the corresponding static table entry. Permission to receive frames from a mac address is granted via the static table entries. This attribute, badVerifyDiscards, is directly influenced by: 1. secureOption and 2. the static table entries. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbseUnicastNoMatches 1.3.6.1.4.1.562.36.2.1.100.3.11.17.1.4
This attribute is indicative of the number frames discarded because the MAC address found in the destination field did not match the local MAC address of the bridge port. This counter is only applicable for the protocols that are being routed currently.This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbseStaticEntryDiscards 1.3.6.1.4.1.562.36.2.1.100.3.11.17.1.5
This attribute is indicative of the number of frames that were discarded because of the following two reasons: a) there was no entry for the 'allowed to go' field in the static table entry, where the input port is this bridge port. b) for spanning tree bpdus that are locally processed. This counter wraps around its maximum value of 4294967295. It might prove useful to check the static table entry corresponding to the bridge port in question, if this counter consistently displays a high value. Ideally this counter should be as low as possible.
OBJECT-TYPE    
  Counter32  

mscVrPpTbseDynamicEntryDiscards 1.3.6.1.4.1.562.36.2.1.100.3.11.17.1.6
This attribute is indicative of the number of incoming frames that a) were discarded because of the fact that the bridge port, the frame is to go out of matches the bridge port it came in from or b) if the stp port state of the out port is not forwarding. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbseLearningDiscards 1.3.6.1.4.1.562.36.2.1.100.3.11.17.1.7
This attribute is indicative of the number of frames that were discarded while this bridge port was in a state other than the forwarding state. While in learning state the frame is discarded after the information from its header is learnt. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbseInDiscards 1.3.6.1.4.1.562.36.2.1.100.3.11.17.1.8
This attribute is indicative of the number of frames that were received by this bridge port and were discarded by the forwarding process. This includes frames that could have been discarded due to filtering. A repidly increasing value for this attribute could indicate a shrtage of resource in terms of memory needed to process the incoming frames. More memory can be provisioned through the VirtualRouter's memory manager.
OBJECT-TYPE    
  Counter32  

mscVrPpTbseInFrames 1.3.6.1.4.1.562.36.2.1.100.3.11.17.1.9
This attribute is indicative of the number of frames that have been received by this port from its segment. Note that a frame received on this bridge port is counted if and only if it can be processed by the bridge logic contained in this bridge unit, a protocol that can be processed by the bridge logic. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbseOutFrames 1.3.6.1.4.1.562.36.2.1.100.3.11.17.1.10
This attribute is indicative of the number of frames that have been transmitted out this bridge port. Note that frame transmitted out this bridge port is counted if and only if it is for a protocol being processed by the bridge unit. This also includes management frames.This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbseStpOperTable 1.3.6.1.4.1.562.36.2.1.100.3.11.18
This group houses all the port specific operational attributes that belong to the Stp group. The Stp group is applicable to all the bridge ports that participate in the spanning tree protocol. These attributes reflect the state of the bridge port's participation in the spanning tree protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbseStpOperEntry

mscVrPpTbseStpOperEntry 1.3.6.1.4.1.562.36.2.1.100.3.11.18.1
An entry in the mscVrPpTbseStpOperTable.
OBJECT-TYPE    
  MscVrPpTbseStpOperEntry  

mscVrPpTbseStpPortState 1.3.6.1.4.1.562.36.2.1.100.3.11.18.1.2
This attribute specifies the spanning tree protocol state of the bridge port.
OBJECT-TYPE    
  INTEGER disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6)  

mscVrPpTbseStpTypeOper 1.3.6.1.4.1.562.36.2.1.100.3.11.18.1.3
This attribute specifies the type of spanning tree protocol the port is participating in. A bridge port could participate in either the ieee8021 spanning tree protocol or the dec spanning tree protocol.
OBJECT-TYPE    
  INTEGER none(0), dec(2), ieee8021(3)  

mscVrPpTbseDesignatedCost 1.3.6.1.4.1.562.36.2.1.100.3.11.18.1.4
This attribute specifies the path cost of the designated port of the lan segment connected to the port.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpTbsePathCostOper 1.3.6.1.4.1.562.36.2.1.100.3.11.18.1.5
This attribute specifies the contribution of this port, to all the paths to the root bridge that include this port. This attribute pathCostOper will track the value of the attribute pathCostProv when the value of the attribute pathCostMethod is set of off.
OBJECT-TYPE    
  Unsigned32 1..65535  

mscVrPpTbseDesignatedBridge 1.3.6.1.4.1.562.36.2.1.100.3.11.18.1.6
This attribute specifies the identifier of the bridge that this port considers to be the designated bridge.
OBJECT-TYPE    
  BridgeId SIZE(8)  

mscVrPpTbseDesignatedPort 1.3.6.1.4.1.562.36.2.1.100.3.11.18.1.7
This attribute specifies the port identifier of the port on the designated bridge, attached to the same lan as this port is attached to.
OBJECT-TYPE    
  Hex 0..65535  

mscVrPpTbseForwardTransitions 1.3.6.1.4.1.562.36.2.1.100.3.11.18.1.8
This attribute is indicative of the number of times this bridge port transitioned from the learning state to the forwarding state. This counter wraps around its maximum value of 4294967295. A rapidly increasing value might be indicative of an unstable spanning tree topology.
OBJECT-TYPE    
  Counter32  

mscVrPpTbseBlockingDiscards 1.3.6.1.4.1.562.36.2.1.100.3.11.18.1.9
This attribute is indicative of the number of incoming frames that were discarded because the bridge port was in the blocking state. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbseDesignatedRoot 1.3.6.1.4.1.562.36.2.1.100.3.11.18.1.10
This attribute specifies the bridge identifier of the bridge recorded as the root bridge, in the configuration BPDUs sent out by the designated bridge on the segment to which the port is attached.
OBJECT-TYPE    
  BridgeId SIZE(8)  

mscVrPpTbseStatsTable 1.3.6.1.4.1.562.36.2.1.100.3.11.19
This group houses all the statistical attributes applicable to all types of bridge ports and represents the common factor between them. These attributes in part reflect the state of the bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbseStatsEntry

mscVrPpTbseStatsEntry 1.3.6.1.4.1.562.36.2.1.100.3.11.19.1
An entry in the mscVrPpTbseStatsTable.
OBJECT-TYPE    
  MscVrPpTbseStatsEntry  

mscVrPpTbseBadAbstractDiscards 1.3.6.1.4.1.562.36.2.1.100.3.11.19.1.1
This attribute is indicative of the number of frames that were discarded because the data that was abstracted, from frames coming in through this bridge port, did not conform to the format expected by the bridge logic.This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbseTinygramFramesIn 1.3.6.1.4.1.562.36.2.1.100.3.11.19.1.2
This attribute is indicative of the number of frames received on this bridge port that used the tinygram compression scheme.
OBJECT-TYPE    
  Counter32  

mscVrPpTbseTinygramFramesOut 1.3.6.1.4.1.562.36.2.1.100.3.11.19.1.3
This attribute is indicative of the number of frames transmitted out this bridge port that used the tinygram compression scheme.
OBJECT-TYPE    
  Counter32  

mscVrPpTbseInFilterDiscards 1.3.6.1.4.1.562.36.2.1.100.3.11.19.1.4
This attribute is indicative of the number of frames discarded at the in filter point. This includes a) frames discarded due to application of the filter defined with PCF for the in filter point and b) the frames discarded due to domain based filtering at the in filter point. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbseOutFilterDiscards 1.3.6.1.4.1.562.36.2.1.100.3.11.19.1.5
This attribute is indicative of the number of frames discarded at the out filter point. This includes: a) frames discarded due to application of the filter defined with PCF for the out filter point and b) the frames discarded due to domain based filtering at the out filter point. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpSrsg 1.3.6.1.4.1.562.36.2.1.100.3.12
OBJECT IDENTIFIER    

mscVrPpSrsgRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.3.12.1
This entry controls the addition and deletion of mscVrPpSrsg components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrsgRowStatusEntry

mscVrPpSrsgRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.3.12.1.1
A single entry in the table represents a single mscVrPpSrsg component.
OBJECT-TYPE    
  MscVrPpSrsgRowStatusEntry  

mscVrPpSrsgRowStatus 1.3.6.1.4.1.562.36.2.1.100.3.12.1.1.1
This variable is used as the basis for SNMP naming of mscVrPpSrsg components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscVrPpSrsgComponentName 1.3.6.1.4.1.562.36.2.1.100.3.12.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscVrPpSrsgStorageType 1.3.6.1.4.1.562.36.2.1.100.3.12.1.1.4
This variable represents the storage type value for the mscVrPpSrsg tables.
OBJECT-TYPE    
  StorageType  

mscVrPpSrsgIndex 1.3.6.1.4.1.562.36.2.1.100.3.12.1.1.10
This variable represents the index for the mscVrPpSrsg tables.
OBJECT-TYPE    
  NonReplicated  

mscVrPpSrsgProvTable 1.3.6.1.4.1.562.36.2.1.100.3.12.10
This group houses all the provisionable attributes that belong to the this group. This group of attributes is applicable to all types of bridge ports and represent the common factor between them. These attributes influence the working of a bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrsgProvEntry

mscVrPpSrsgProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.12.10.1
An entry in the mscVrPpSrsgProvTable.
OBJECT-TYPE    
  MscVrPpSrsgProvEntry  

mscVrPpSrsgTranslateIpx 1.3.6.1.4.1.562.36.2.1.100.3.12.10.1.1
This attribute specifies the type of translation to be performed on frames carrying IPX packets. Ethernet frames carrying IPX payload could be translated to IEEE 802.3 frames (with the same IPX payload) or vice- versa. The main reason to do so is to allow the bridge unit to consistently forward one type of frames carrying IPX packets. Translations can be turned off altogether in which case the IPX frames will pass through the bridge unit unchanged.
OBJECT-TYPE    
  INTEGER off(0), ieee8023(1), ethernet(2), snap(3), sap(4)  

mscVrPpSrsgFragmentIp 1.3.6.1.4.1.562.36.2.1.100.3.12.10.1.2
This attribute specifies if or not outbound frames carrying IP datagrams should be fragmented to conform to message transfer unit (mtu) sizes dictated by the media.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpSrsgServiceClass 1.3.6.1.4.1.562.36.2.1.100.3.12.10.1.3
This attribute specifies if the frames should be ordered or not before they are transmitted through a bridge port. If this attribute has a value of ordered the received frames are ordered as in the original message, before they are transmitted out through a bridge port. If it has a value of notOrdered, received then frames pass through the bridge unit in the order they are received. This feature can be used over multiple telecommunication links to increase data flow. Please note that this attribute only affects link protocols and is ineffective with lan media.
OBJECT-TYPE    
  INTEGER ordered(0), notOrdered(1)  

mscVrPpSrsgConvertArpMacAddress 1.3.6.1.4.1.562.36.2.1.100.3.12.10.1.4
This attribute is indicative of the state of the MAC address format conversion process for ARP/RARP frames. The MAC addresses may be translated if need be from a canonical format to a non-canonical format, based on the needs of the associated media. If this attribute is set to a value of on then all Mac addresses will converted if need be to suit the format of mac address, the outgoing media will support. If this attribute is set to a value of off no such conversion takes place.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpSrsgPortNum 1.3.6.1.4.1.562.36.2.1.100.3.12.10.1.5
This attribute is indicative of the unique number assigned to the bridge port. It is used for SNMP management of this bridge port and in spanning tree as an identifier this bridge port. Notes regarding portNum: Escape routines exist for initializing, copying, and deleting port numbers. This is necessary because SNMP requires a unique port instance identifier. The initPortNum escape routine sets the port number to a value in the range 1-255 for this purpose. The setCopiedPortNum escape routine exists to maintain the uniqueness of the port number in cases when one port is copied to another. When a bridge port is deleted, the releasePortNum escape routine places the port number being released into a pending deletion state. This is because the port number cannot be re-allocated until the port is truely deleted in the current view. This is necessary since there is no guarantee of order when processing changes to multiple protocol ports so without the pending deletion state, the same port number could be temporarily assigned to two ports for a short period of time. The portNum is set as component critical since bridging also uses the port number as a key for indexing into its data structures. If a port is deleted then re-added under the same protocol port, CAS treats the change as a SET to the portNum attribute.
OBJECT-TYPE    
  Unsigned32 0..255  

mscVrPpSrsgStpProvTable 1.3.6.1.4.1.562.36.2.1.100.3.12.12
This group houses all the port specific provisionable attributes that belong to the Stp group. The Stp group is applicable to all the bridge ports that participate in the spanning tree protocol. These attributes influence the participation of the bridge port in the spanning tree protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrsgStpProvEntry

mscVrPpSrsgStpProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.12.12.1
An entry in the mscVrPpSrsgStpProvTable.
OBJECT-TYPE    
  MscVrPpSrsgStpProvEntry  

mscVrPpSrsgAdminStatus 1.3.6.1.4.1.562.36.2.1.100.3.12.12.1.1
This attribute defines the current administrative state for this component. enabled indicates that the component is available for operation. disabled indicates the component is unavailable for operation.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mscVrPpSrsgPortStateStpControl 1.3.6.1.4.1.562.36.2.1.100.3.12.12.1.2
This attribute specifies whether or not spanning tree protocol state for this bridge port is controlled by the spanning tree protocol. In essence it indicates the participation of this bridge port in the spanning tree protocol, by accepting and acting on received bridge protocol data units and by sending out the same. on signifies that this bridge port's spanning tree port state is controlled by the spanning tree protocol. A value of off signifies that the spanning tree port state of this bridge port is unaffected by the spanning tree protocol. This in effect puts the bridge port out of reach of the spanning tree protocol and in the forwarding state. Care should be taken while assigning a value of off to this attribute, as this might cause network loops. Please do not set this attribute to off unless you are absolutely sure about the effect of such an action on your network topology.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpSrsgStpTypeProv 1.3.6.1.4.1.562.36.2.1.100.3.12.12.1.3
This attribute specifies the type of spanning tree protocol the port is participating in. A bridge port could participate in either the ieee8021 spanning tree protocol or the dec spanning tree protocol. If the value of the attribute protocolSpec in the SpanningTreeProtocol component, provisioned under the TransparentBridge component is in conflict with the value of this attribute, the value of the protocolSpec attribute will prevail. Prevailing stp type is reflected in the value of the attribute stpTypeOper.
OBJECT-TYPE    
  INTEGER dec(2), ieee8021(3)  

mscVrPpSrsgPortPriority 1.3.6.1.4.1.562.36.2.1.100.3.12.12.1.4
This attribute specifies the value for port priority, which is contained in the first octet of the port identifier. Valid values are as follows: 1) 0..255 for stp type DEC and 2) 0..65535 for stp type IEEE.
OBJECT-TYPE    
  Unsigned32 0..65535  

mscVrPpSrsgPathCost 1.3.6.1.4.1.562.36.2.1.100.3.12.12.1.5
This attribute specifies the contribution of this port, to all the paths to the root bridge that include this port. Please note that the value of the attribute pathCostMethod is applied only when the value of the attribute pathCostMethod is set to on and is ignored if otherwise.
OBJECT-TYPE    
  Unsigned32 1..65535  

mscVrPpSrsgPathCostMethod 1.3.6.1.4.1.562.36.2.1.100.3.12.12.1.6
This attribute specifies the method used by the bridging logic, to calculate the path cost to the bridge considered to be the root bridge in the spanning tree topology. This attribute should be set to off before attempting to provision a value for pathCostProv.
OBJECT-TYPE    
  INTEGER off(1), dec(2), ieee8021(3)  

mscVrPpSrsgDIProvTable 1.3.6.1.4.1.562.36.2.1.100.3.12.13
This group houses all the provisionable, domain specific attributes for a non-encapsulating bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrsgDIProvEntry

mscVrPpSrsgDIProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.12.13.1
An entry in the mscVrPpSrsgDIProvTable.
OBJECT-TYPE    
  MscVrPpSrsgDIProvEntry  

mscVrPpSrsgDomainNum 1.3.6.1.4.1.562.36.2.1.100.3.12.13.1.1
This attribute specifies the domain number associated with this bridge port. Domain numbers are used for confining frames to a domain. Domain based filtering provides a complete segregation of traffic based on domain number associated with frames. There can exist only sixteen domains when a spanning tree is desired specific to each domain. When there is only a single spanning tree spanning all the domains the maximum number of domains possible are 4294967293. This attribute is of no relevance when associated with backbone bridge port. Its value is ignored in such a situation.
OBJECT-TYPE    
  Unsigned32 1..4294967293  

mscVrPpSrsgPreserveDomain 1.3.6.1.4.1.562.36.2.1.100.3.12.13.1.2
This attribute specifies if the domain information should be preserved or embedded in the frame header. This attribute applies only to backbone ports and does not affect the access bridge ports. By setting this attribute to a value of on, domain information could be preserved in frames being tunnelled across the a backbone, so that this information can be deciphered at the other end of the backbone tunnel. This preserves the integrity of the domains thus preventing domain breaches while tunnelling frames across backbone network. If the value of this attribute is set to off then domain information is not preserved in the header of the frames tunnelling through the backbone. This eliminates the overhead incurred to preserve domain information across the backbone while tunnelling frames across it. Preserve domain is relevant when used in conjunction with the following media: FDDI, ATM MPE, Frame Relay and PPP. It is ignored when used with other types of media.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpSrsgStateTable 1.3.6.1.4.1.562.36.2.1.100.3.12.14
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrsgStateEntry

mscVrPpSrsgStateEntry 1.3.6.1.4.1.562.36.2.1.100.3.12.14.1
An entry in the mscVrPpSrsgStateTable.
OBJECT-TYPE    
  MscVrPpSrsgStateEntry  

mscVrPpSrsgAdminState 1.3.6.1.4.1.562.36.2.1.100.3.12.14.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscVrPpSrsgOperationalState 1.3.6.1.4.1.562.36.2.1.100.3.12.14.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscVrPpSrsgUsageState 1.3.6.1.4.1.562.36.2.1.100.3.12.14.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscVrPpSrsgOperStatusTable 1.3.6.1.4.1.562.36.2.1.100.3.12.15
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrsgOperStatusEntry

mscVrPpSrsgOperStatusEntry 1.3.6.1.4.1.562.36.2.1.100.3.12.15.1
An entry in the mscVrPpSrsgOperStatusTable.
OBJECT-TYPE    
  MscVrPpSrsgOperStatusEntry  

mscVrPpSrsgSnmpOperStatus 1.3.6.1.4.1.562.36.2.1.100.3.12.15.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscVrPpSrsgOperTable 1.3.6.1.4.1.562.36.2.1.100.3.12.16
This group houses all the operational attributes belonging to the base group. The base group of attributes is applicable to all types of bridge ports and represent the common factor between them. These attributes in part, reflect the state of a bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrsgOperEntry

mscVrPpSrsgOperEntry 1.3.6.1.4.1.562.36.2.1.100.3.12.16.1
An entry in the mscVrPpSrsgOperTable.
OBJECT-TYPE    
  MscVrPpSrsgOperEntry  

mscVrPpSrsgPortName 1.3.6.1.4.1.562.36.2.1.100.3.12.16.1.1
The attribute portName is a string of the form 'BridgePortName-i', where BridgePortName is the abbreviation of the corresponding bridge port and i is the instance identifier of the ProtocolPort, the bridge port is provisioned under. For example a TransparentBridgePort provisioned under ProtocolPort/myport would have a name TBP-myport.
OBJECT-TYPE    
  AsciiString SIZE(4..29)  

mscVrPpSrsgUpTime 1.3.6.1.4.1.562.36.2.1.100.3.12.16.1.3
This attribute specifies the accumulated up time of this bridge port since the last reset occurred.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpSrsgDownTime 1.3.6.1.4.1.562.36.2.1.100.3.12.16.1.4
This attribute specifies the accumulated down time of this bridge port since the last reset occurred.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpSrsgBridgingMode 1.3.6.1.4.1.562.36.2.1.100.3.12.16.1.5
This attribute specifies the mode of bridging this port can support. It in turn implies the format of frames, this bridge port can process and forward.
OBJECT-TYPE    
  INTEGER unknown(1), tb(2), sr(3), srt(4)  

mscVrPpSrsgBridgePortConfig 1.3.6.1.4.1.562.36.2.1.100.3.12.16.1.6
This attribute specifies the bridge port's configuration. It indicates if the bridge port is operating as an access port or as a backbone port. An access bridge port does not encapsulate a MAC frame and does not preserve domain information in the encapsulation, whereas a backbone bridge port encapsulates the MAC frame and optionally preserves domain information in the encapsulated frame.A backbone bridge port is typically used to transport frames across a high bandwidth backbone network to another bridge unit for further processing/forwarding of the frame.
OBJECT-TYPE    
  INTEGER access(1), backbone(2)  

mscVrPpSrsgBridgePortType 1.3.6.1.4.1.562.36.2.1.100.3.12.16.1.7
This attribute specifies the type of bridge port that was provisioned. It takes into consideration the bridgingMode, bridgePortConfig and the media the bridge port is linked to before branding a bridge port.
OBJECT-TYPE    
  INTEGER ethernetBridgePort(0), tokenRingBridgePort(1), fddiBridgePort(2), tokenBusBridgePort(3), fddiEncapsulatingBridgePort(4), vnsBridgePort(5), frameRelayBridgePort(6), pppBridgePort(7), smdsBridgePort(8), vcpBridgePort(9), x25BridgePort(10), srEncapSrBridgePort(11), srEncapTbBridgePort(12), sourceGateSrBridgePort(13), sourceGateTbBridgePort(14), srtbBridgePort(15), tbsrBridgePort(16), clusterSrBridgePort(17), clusterTbBridgePort(18), unknown(19), atmMpeBridgePort(20), snaDlrBridgePort(21), lanEmulationClientEthernet(22)  

mscVrPpSrsgIfIndex 1.3.6.1.4.1.562.36.2.1.100.3.12.16.1.8
This attribute specifies the index into the Interface Table where in information about the media interface corresponding to the bridge port is maintained.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscVrPpSrsgDelayExceededDiscards 1.3.6.1.4.1.562.36.2.1.100.3.12.16.1.10
This attribute is indicative of the number of frames that were discarded because the time taken to process these frames exceeded the transit delay allowed for this bridge unit. This attribute is not supported by bridging and will always have a value of 0.
OBJECT-TYPE    
  Counter32  

mscVrPpSrsgMtuExceededDiscards 1.3.6.1.4.1.562.36.2.1.100.3.12.16.1.11
This attribute is indicative of the number of frames discarded because the size of the out bound frame exceeded the message transfer unit (mtu) allowed for the bridge port. Note that this counter only refers to the outbound frames for this bridge port. This counter wraps around its maximum value of 4294967295. This counter is influenced by the attribute fragmentIp. This counter is incremented when the a frame larger than the mtu allowed is encountered and cannot be fragmented. If this counter is increasing steadily, it might be useful to set the value of the attribute fragmentIp to a value of on.
OBJECT-TYPE    
  Counter32  

mscVrPpSrsgStpOperTable 1.3.6.1.4.1.562.36.2.1.100.3.12.18
This group houses all the port specific operational attributes that belong to the Stp group. The Stp group is applicable to all the bridge ports that participate in the spanning tree protocol. These attributes reflect the state of the bridge port's participation in the spanning tree protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrsgStpOperEntry

mscVrPpSrsgStpOperEntry 1.3.6.1.4.1.562.36.2.1.100.3.12.18.1
An entry in the mscVrPpSrsgStpOperTable.
OBJECT-TYPE    
  MscVrPpSrsgStpOperEntry  

mscVrPpSrsgStpPortState 1.3.6.1.4.1.562.36.2.1.100.3.12.18.1.2
This attribute specifies the spanning tree protocol state of the bridge port.
OBJECT-TYPE    
  INTEGER disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6)  

mscVrPpSrsgStpTypeOper 1.3.6.1.4.1.562.36.2.1.100.3.12.18.1.3
This attribute specifies the type of spanning tree protocol the port is participating in. A bridge port could participate in either the ieee8021 spanning tree protocol or the dec spanning tree protocol.
OBJECT-TYPE    
  INTEGER none(0), dec(2), ieee8021(3)  

mscVrPpSrsgDesignatedCost 1.3.6.1.4.1.562.36.2.1.100.3.12.18.1.4
This attribute specifies the path cost of the designated port of the lan segment connected to the port.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpSrsgPathCostOper 1.3.6.1.4.1.562.36.2.1.100.3.12.18.1.5
This attribute specifies the contribution of this port, to all the paths to the root bridge that include this port. This attribute pathCostOper will track the value of the attribute pathCostProv when the value of the attribute pathCostMethod is set of off.
OBJECT-TYPE    
  Unsigned32 1..65535  

mscVrPpSrsgDesignatedBridge 1.3.6.1.4.1.562.36.2.1.100.3.12.18.1.6
This attribute specifies the identifier of the bridge that this port considers to be the designated bridge.
OBJECT-TYPE    
  BridgeId SIZE(8)  

mscVrPpSrsgDesignatedPort 1.3.6.1.4.1.562.36.2.1.100.3.12.18.1.7
This attribute specifies the port identifier of the port on the designated bridge, attached to the same lan as this port is attached to.
OBJECT-TYPE    
  Hex 0..65535  

mscVrPpSrsgForwardTransitions 1.3.6.1.4.1.562.36.2.1.100.3.12.18.1.8
This attribute is indicative of the number of times this bridge port transitioned from the learning state to the forwarding state. This counter wraps around its maximum value of 4294967295. A rapidly increasing value might be indicative of an unstable spanning tree topology.
OBJECT-TYPE    
  Counter32  

mscVrPpSrsgBlockingDiscards 1.3.6.1.4.1.562.36.2.1.100.3.12.18.1.9
This attribute is indicative of the number of incoming frames that were discarded because the bridge port was in the blocking state. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpSrsgDesignatedRoot 1.3.6.1.4.1.562.36.2.1.100.3.12.18.1.10
This attribute specifies the bridge identifier of the bridge recorded as the root bridge, in the configuration BPDUs sent out by the designated bridge on the segment to which the port is attached.
OBJECT-TYPE    
  BridgeId SIZE(8)  

mscVrPpSrsgStatsTable 1.3.6.1.4.1.562.36.2.1.100.3.12.19
This group houses all the statistical attributes applicable to all types of bridge ports and represents the common factor between them. These attributes in part reflect the state of the bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrsgStatsEntry

mscVrPpSrsgStatsEntry 1.3.6.1.4.1.562.36.2.1.100.3.12.19.1
An entry in the mscVrPpSrsgStatsTable.
OBJECT-TYPE    
  MscVrPpSrsgStatsEntry  

mscVrPpSrsgBadAbstractDiscards 1.3.6.1.4.1.562.36.2.1.100.3.12.19.1.1
This attribute is indicative of the number of frames that were discarded because the data that was abstracted, from frames coming in through this bridge port, did not conform to the format expected by the bridge logic.This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpSrsgTinygramFramesIn 1.3.6.1.4.1.562.36.2.1.100.3.12.19.1.2
This attribute is indicative of the number of frames received on this bridge port that used the tinygram compression scheme.
OBJECT-TYPE    
  Counter32  

mscVrPpSrsgTinygramFramesOut 1.3.6.1.4.1.562.36.2.1.100.3.12.19.1.3
This attribute is indicative of the number of frames transmitted out this bridge port that used the tinygram compression scheme.
OBJECT-TYPE    
  Counter32  

mscVrPpSrsgInFilterDiscards 1.3.6.1.4.1.562.36.2.1.100.3.12.19.1.4
This attribute is indicative of the number of frames discarded at the in filter point. This includes a) frames discarded due to application of the filter defined with PCF for the in filter point and b) the frames discarded due to domain based filtering at the in filter point. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpSrsgOutFilterDiscards 1.3.6.1.4.1.562.36.2.1.100.3.12.19.1.5
This attribute is indicative of the number of frames discarded at the out filter point. This includes: a) frames discarded due to application of the filter defined with PCF for the out filter point and b) the frames discarded due to domain based filtering at the out filter point. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpSrsgSrProvTable 1.3.6.1.4.1.562.36.2.1.100.3.12.20
This group contains all port specific, provisionable attributes associated with SourceRouteBridge ports.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrsgSrProvEntry

mscVrPpSrsgSrProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.12.20.1
An entry in the mscVrPpSrsgSrProvTable.
OBJECT-TYPE    
  MscVrPpSrsgSrProvEntry  

mscVrPpSrsgHopCount 1.3.6.1.4.1.562.36.2.1.100.3.12.20.1.1
This attribute specifies the maximum number of hops allowed in Spanning Tree Explore and All Routes Explore frames. This value is one less than the maximum number of route descriptors allowed in a source route frame
OBJECT-TYPE    
  Unsigned32 1..7  

mscVrPpSrsgExploreFrameTreatment 1.3.6.1.4.1.562.36.2.1.100.3.12.20.1.2
This attribute specifies whether or not explore frames received from SourceRouteBridge ports will be sent to the SRTB-8209 translation or the encapsulated SourceRouteBridge logic. This option is used only when both the TbsrBridgePort and the SrtbBridgePort are provisioned and enabled. A value of Xlate implies that the explore frames will be sent to the Srtb translation logic and a value of Encap implies that the frames will be sent to the Encapsulated source route bridging logic.
OBJECT-TYPE    
  INTEGER encap(0), xlate(1)  

mscVrPpSrsgLanId 1.3.6.1.4.1.562.36.2.1.100.3.12.20.1.3
This attribute specifies the identifier for the physical LAN that this port is attached. All SourceRouteBridge ports are assigned to a physical LAN and a logical internal LAN. Current source route bridge implementations limit the lanId to a value in the range 0 to 4095.
OBJECT-TYPE    
  Unsigned32 0..4095  

mscVrPpSrsgInternalLanId 1.3.6.1.4.1.562.36.2.1.100.3.12.20.1.4
This attribute specifies the identifier for the internal logical LAN this port is attached. All SourceRouteBridge ports are assigned to a physical LAN and a logical internal LAN. Current source route bridge implementations limit the lanId to a value in the range 0 to 4095.
OBJECT-TYPE    
  Unsigned32 0..4095  

mscVrPpSrsgBridgeNum 1.3.6.1.4.1.562.36.2.1.100.3.12.20.1.5
This attribute specifies the value that is used to identify this bridge when more than one bridge is used to span the same two LAN segments.
OBJECT-TYPE    
  Unsigned32 0..15  

mscVrPpSrsgLargestFrame 1.3.6.1.4.1.562.36.2.1.100.3.12.20.1.6
This attribute specifies the maximum frame size (LLC and above) in octets, allowed by this SourceRouteBridge port. This field is used to determine whether a modification of the largest frame field of the routing control field of the routing information field is warranted.
OBJECT-TYPE    
  Unsigned32 516 | 1470 | 2052 | 4399 | 8130 | 11407 | 17749  

mscVrPpSrsgSteSpanMode 1.3.6.1.4.1.562.36.2.1.100.3.12.20.1.7
This attribute determines how this bridge port will react when presented with a Spanning Tree Explore frame. If disabled, the Spanning Tree Explore frame is discarded regardless of the value of stpPortState. If the value of this attribute is forced, the Spanning Tree Explore frame is forwarded regardless of the value of stpPortState. autoSpan uses the stpPortState value to decide whether or not Spanning Tree Explore frames should be forwarded out this bridge port. If the port is in the forwarding state, the frame is received and transmitted otherwise the frame is discarded.
OBJECT-TYPE    
  INTEGER autoSpan(1), disabled(2), forced(3)  

mscVrPpSrsgAreRdLimit 1.3.6.1.4.1.562.36.2.1.100.3.12.20.1.8
This attribute specifies the number of route descriptors allowed in an All Routes Explore frame received on a SourceRouteBridgePort or SourceRouteTransparentBridgePort. Current source route bridge implementations limit the areRdLimit to a value in the range 0 to 8.
OBJECT-TYPE    
  Unsigned32 0..8  

mscVrPpSrsgSteRdLimit 1.3.6.1.4.1.562.36.2.1.100.3.12.20.1.9
This attribute specifies the number of route descriptors allowed in a Spanning Tree Explore frame received on a SourceRouteBridgePort or SourceRouteTransparentBridgePort. Current source route bridge implementations limit the steRdLimit to a value in the range 0 to 8.
OBJECT-TYPE    
  Unsigned32 0..8  

mscVrPpSrsgSrStatsTable 1.3.6.1.4.1.562.36.2.1.100.3.12.21
This group contains all port specific statistical attributes associated with SourceRouteBridge ports.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrsgSrStatsEntry

mscVrPpSrsgSrStatsEntry 1.3.6.1.4.1.562.36.2.1.100.3.12.21.1
An entry in the mscVrPpSrsgSrStatsTable.
OBJECT-TYPE    
  MscVrPpSrsgSrStatsEntry  

mscVrPpSrsgSpecInFrames 1.3.6.1.4.1.562.36.2.1.100.3.12.21.1.1
This attribute specifies the number of specifically routed frames that were received by this bridge port. A specifically routed frame has a route descriptor, constructed by the originating host which details an explicit route to the destination host. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrsgSpecOutFrames 1.3.6.1.4.1.562.36.2.1.100.3.12.21.1.2
This attribute specifies the number of specifically routed frames that were transmitted from this bridge port. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrsgApeInFrames 1.3.6.1.4.1.562.36.2.1.100.3.12.21.1.3
This attribute specifies the number of All Path Explore frames received on this bridge port. The All Path Explore frames are forwarded to all SourceRouteBridge ports assigned to this bridge regardless of the port's portStpStates. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrsgApeOutFrames 1.3.6.1.4.1.562.36.2.1.100.3.12.21.1.4
This attribute specifies the number of All Path Explore frames transmitted on this bridge port. The All Path Explore frames are forwarded to all SourceRouteBridge ports assigned to this bridge regardless of the port's portStpState state. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrsgSteInFrames 1.3.6.1.4.1.562.36.2.1.100.3.12.21.1.5
This attribute specifies the number of Spanning Tree Explore frames received on this bridge port. The Spanning Tree Explore frames are only forwarded through bridge ports whose portStpState has a value of forwarding. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrsgSteOutFrames 1.3.6.1.4.1.562.36.2.1.100.3.12.21.1.6
This attribute specifies the number of Spanning Tree Frames transmitted on this bridge port. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrsgSegmentMismatchDiscards 1.3.6.1.4.1.562.36.2.1.100.3.12.21.1.7
This attribute specifies the number of All Routes Explore and Spanning Tree Explore frames that were discarded due to an invalid next segment value in the routing information field. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrsgDupSegmentDiscards 1.3.6.1.4.1.562.36.2.1.100.3.12.21.1.8
This attribute specifies the number of frames discarded due to the presence of a duplicate segment identifier in the route descriptor field which may indicate a loop in the network topology. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrsgHopCountExceededDiscards 1.3.6.1.4.1.562.36.2.1.100.3.12.21.1.9
This attribute specifies the number of All Routes Explore and Spanning Tree Explore frames discarded by this bridge port due to a frame exceeding the maximum size allowed for a route descriptor length. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrsgDupLanIdOrTreeErrors 1.3.6.1.4.1.562.36.2.1.100.3.12.21.1.10
This attribute specifies the number frames received which contain duplicate LAN IDs or Tree errors. This attribute is helpful in debugging problems in networks which contain older IBM-SR bridges. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrsgLanIdMismatches 1.3.6.1.4.1.562.36.2.1.100.3.12.21.1.11
This attributes counts the number of All Routes Explore or Spanning Tree Explore frames that were discarded because the last LAN ID in the routing information field did not equal the LAN ID. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrsgStaticDiscards 1.3.6.1.4.1.562.36.2.1.100.3.12.21.1.12
This attribute is indicative of the number of explorer frames discarded due to fact that the outbound SourceRouteBridge port was disabled or deleted. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrsgDynamicDiscards 1.3.6.1.4.1.562.36.2.1.100.3.12.21.1.13
This attribute specifies the number of frames discarded due to receiving a frame with a target LAN ID which did not match the internal LAN ID of the receiving bridge port. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpTbsg 1.3.6.1.4.1.562.36.2.1.100.3.13
OBJECT IDENTIFIER    

mscVrPpTbsgRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.3.13.1
This entry controls the addition and deletion of mscVrPpTbsg components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbsgRowStatusEntry

mscVrPpTbsgRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.3.13.1.1
A single entry in the table represents a single mscVrPpTbsg component.
OBJECT-TYPE    
  MscVrPpTbsgRowStatusEntry  

mscVrPpTbsgRowStatus 1.3.6.1.4.1.562.36.2.1.100.3.13.1.1.1
This variable is used as the basis for SNMP naming of mscVrPpTbsg components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscVrPpTbsgComponentName 1.3.6.1.4.1.562.36.2.1.100.3.13.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscVrPpTbsgStorageType 1.3.6.1.4.1.562.36.2.1.100.3.13.1.1.4
This variable represents the storage type value for the mscVrPpTbsg tables.
OBJECT-TYPE    
  StorageType  

mscVrPpTbsgIndex 1.3.6.1.4.1.562.36.2.1.100.3.13.1.1.10
This variable represents the index for the mscVrPpTbsg tables.
OBJECT-TYPE    
  NonReplicated  

mscVrPpTbsgProvTable 1.3.6.1.4.1.562.36.2.1.100.3.13.10
This group houses all the provisionable attributes that belong to the this group. This group of attributes is applicable to all types of bridge ports and represent the common factor between them. These attributes influence the working of a bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbsgProvEntry

mscVrPpTbsgProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.13.10.1
An entry in the mscVrPpTbsgProvTable.
OBJECT-TYPE    
  MscVrPpTbsgProvEntry  

mscVrPpTbsgTranslateIpx 1.3.6.1.4.1.562.36.2.1.100.3.13.10.1.1
This attribute specifies the type of translation to be performed on frames carrying IPX packets. Ethernet frames carrying IPX payload could be translated to IEEE 802.3 frames (with the same IPX payload) or vice- versa. The main reason to do so is to allow the bridge unit to consistently forward one type of frames carrying IPX packets. Translations can be turned off altogether in which case the IPX frames will pass through the bridge unit unchanged.
OBJECT-TYPE    
  INTEGER off(0), ieee8023(1), ethernet(2), snap(3), sap(4)  

mscVrPpTbsgFragmentIp 1.3.6.1.4.1.562.36.2.1.100.3.13.10.1.2
This attribute specifies if or not outbound frames carrying IP datagrams should be fragmented to conform to message transfer unit (mtu) sizes dictated by the media.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpTbsgServiceClass 1.3.6.1.4.1.562.36.2.1.100.3.13.10.1.3
This attribute specifies if the frames should be ordered or not before they are transmitted through a bridge port. If this attribute has a value of ordered the received frames are ordered as in the original message, before they are transmitted out through a bridge port. If it has a value of notOrdered, received then frames pass through the bridge unit in the order they are received. This feature can be used over multiple telecommunication links to increase data flow. Please note that this attribute only affects link protocols and is ineffective with lan media.
OBJECT-TYPE    
  INTEGER ordered(0), notOrdered(1)  

mscVrPpTbsgConvertArpMacAddress 1.3.6.1.4.1.562.36.2.1.100.3.13.10.1.4
This attribute is indicative of the state of the MAC address format conversion process for ARP/RARP frames. The MAC addresses may be translated if need be from a canonical format to a non-canonical format, based on the needs of the associated media. If this attribute is set to a value of on then all Mac addresses will converted if need be to suit the format of mac address, the outgoing media will support. If this attribute is set to a value of off no such conversion takes place.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpTbsgPortNum 1.3.6.1.4.1.562.36.2.1.100.3.13.10.1.5
This attribute is indicative of the unique number assigned to the bridge port. It is used for SNMP management of this bridge port and in spanning tree as an identifier this bridge port. Notes regarding portNum: Escape routines exist for initializing, copying, and deleting port numbers. This is necessary because SNMP requires a unique port instance identifier. The initPortNum escape routine sets the port number to a value in the range 1-255 for this purpose. The setCopiedPortNum escape routine exists to maintain the uniqueness of the port number in cases when one port is copied to another. When a bridge port is deleted, the releasePortNum escape routine places the port number being released into a pending deletion state. This is because the port number cannot be re-allocated until the port is truely deleted in the current view. This is necessary since there is no guarantee of order when processing changes to multiple protocol ports so without the pending deletion state, the same port number could be temporarily assigned to two ports for a short period of time. The portNum is set as component critical since bridging also uses the port number as a key for indexing into its data structures. If a port is deleted then re-added under the same protocol port, CAS treats the change as a SET to the portNum attribute.
OBJECT-TYPE    
  Unsigned32 0..255  

mscVrPpTbsgTbProvTable 1.3.6.1.4.1.562.36.2.1.100.3.13.11
This group houses all the port specific provisionable attributes that belong to the Tb group. The Tb group is only applicable bridge port types that operate in the TB mode. These attributes in part influence the working of a bridge port operating in the TB mode.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbsgTbProvEntry

mscVrPpTbsgTbProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.13.11.1
An entry in the mscVrPpTbsgTbProvTable.
OBJECT-TYPE    
  MscVrPpTbsgTbProvEntry  

mscVrPpTbsgSecureOption 1.3.6.1.4.1.562.36.2.1.100.3.13.11.1.1
This attribute specifies whether the port secure feature is enabled. The secure feature, if enabled causes the following things to happen: a) disallows dynamic learning, b) disallows frames to be forwarded that do not satisfy the following condition: the mac address of the source should be found in the forwarding table and the destination mac address of the frame should also be found in the forwarding table. In addition to this, the port the frame was received on should figure as the in port, given the destination mac address found in the frame. c) disallows frames to be forwarded if the allowed to go port map for the destination mac address is empty. This feature in effect allows the user to choose the hosts that can generate traffic and the hosts that can receive traffic through this bridge unit.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscVrPpTbsgStpProvTable 1.3.6.1.4.1.562.36.2.1.100.3.13.12
This group houses all the port specific provisionable attributes that belong to the Stp group. The Stp group is applicable to all the bridge ports that participate in the spanning tree protocol. These attributes influence the participation of the bridge port in the spanning tree protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbsgStpProvEntry

mscVrPpTbsgStpProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.13.12.1
An entry in the mscVrPpTbsgStpProvTable.
OBJECT-TYPE    
  MscVrPpTbsgStpProvEntry  

mscVrPpTbsgAdminStatus 1.3.6.1.4.1.562.36.2.1.100.3.13.12.1.1
This attribute defines the current administrative state for this component. enabled indicates that the component is available for operation. disabled indicates the component is unavailable for operation.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mscVrPpTbsgPortStateStpControl 1.3.6.1.4.1.562.36.2.1.100.3.13.12.1.2
This attribute specifies whether or not spanning tree protocol state for this bridge port is controlled by the spanning tree protocol. In essence it indicates the participation of this bridge port in the spanning tree protocol, by accepting and acting on received bridge protocol data units and by sending out the same. on signifies that this bridge port's spanning tree port state is controlled by the spanning tree protocol. A value of off signifies that the spanning tree port state of this bridge port is unaffected by the spanning tree protocol. This in effect puts the bridge port out of reach of the spanning tree protocol and in the forwarding state. Care should be taken while assigning a value of off to this attribute, as this might cause network loops. Please do not set this attribute to off unless you are absolutely sure about the effect of such an action on your network topology.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpTbsgStpTypeProv 1.3.6.1.4.1.562.36.2.1.100.3.13.12.1.3
This attribute specifies the type of spanning tree protocol the port is participating in. A bridge port could participate in either the ieee8021 spanning tree protocol or the dec spanning tree protocol. If the value of the attribute protocolSpec in the SpanningTreeProtocol component, provisioned under the TransparentBridge component is in conflict with the value of this attribute, the value of the protocolSpec attribute will prevail. Prevailing stp type is reflected in the value of the attribute stpTypeOper.
OBJECT-TYPE    
  INTEGER dec(2), ieee8021(3)  

mscVrPpTbsgPortPriority 1.3.6.1.4.1.562.36.2.1.100.3.13.12.1.4
This attribute specifies the value for port priority, which is contained in the first octet of the port identifier. Valid values are as follows: 1) 0..255 for stp type DEC and 2) 0..65535 for stp type IEEE.
OBJECT-TYPE    
  Unsigned32 0..65535  

mscVrPpTbsgPathCost 1.3.6.1.4.1.562.36.2.1.100.3.13.12.1.5
This attribute specifies the contribution of this port, to all the paths to the root bridge that include this port. Please note that the value of the attribute pathCostMethod is applied only when the value of the attribute pathCostMethod is set to on and is ignored if otherwise.
OBJECT-TYPE    
  Unsigned32 1..65535  

mscVrPpTbsgPathCostMethod 1.3.6.1.4.1.562.36.2.1.100.3.13.12.1.6
This attribute specifies the method used by the bridging logic, to calculate the path cost to the bridge considered to be the root bridge in the spanning tree topology. This attribute should be set to off before attempting to provision a value for pathCostProv.
OBJECT-TYPE    
  INTEGER off(1), dec(2), ieee8021(3)  

mscVrPpTbsgDIProvTable 1.3.6.1.4.1.562.36.2.1.100.3.13.13
This group houses all the provisionable, domain specific attributes for a non-encapsulating bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbsgDIProvEntry

mscVrPpTbsgDIProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.13.13.1
An entry in the mscVrPpTbsgDIProvTable.
OBJECT-TYPE    
  MscVrPpTbsgDIProvEntry  

mscVrPpTbsgDomainNum 1.3.6.1.4.1.562.36.2.1.100.3.13.13.1.1
This attribute specifies the domain number associated with this bridge port. Domain numbers are used for confining frames to a domain. Domain based filtering provides a complete segregation of traffic based on domain number associated with frames. There can exist only sixteen domains when a spanning tree is desired specific to each domain. When there is only a single spanning tree spanning all the domains the maximum number of domains possible are 4294967293. This attribute is of no relevance when associated with backbone bridge port. Its value is ignored in such a situation.
OBJECT-TYPE    
  Unsigned32 1..4294967293  

mscVrPpTbsgPreserveDomain 1.3.6.1.4.1.562.36.2.1.100.3.13.13.1.2
This attribute specifies if the domain information should be preserved or embedded in the frame header. This attribute applies only to backbone ports and does not affect the access bridge ports. By setting this attribute to a value of on, domain information could be preserved in frames being tunnelled across the a backbone, so that this information can be deciphered at the other end of the backbone tunnel. This preserves the integrity of the domains thus preventing domain breaches while tunnelling frames across backbone network. If the value of this attribute is set to off then domain information is not preserved in the header of the frames tunnelling through the backbone. This eliminates the overhead incurred to preserve domain information across the backbone while tunnelling frames across it. Preserve domain is relevant when used in conjunction with the following media: FDDI, ATM MPE, Frame Relay and PPP. It is ignored when used with other types of media.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpTbsgStateTable 1.3.6.1.4.1.562.36.2.1.100.3.13.14
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbsgStateEntry

mscVrPpTbsgStateEntry 1.3.6.1.4.1.562.36.2.1.100.3.13.14.1
An entry in the mscVrPpTbsgStateTable.
OBJECT-TYPE    
  MscVrPpTbsgStateEntry  

mscVrPpTbsgAdminState 1.3.6.1.4.1.562.36.2.1.100.3.13.14.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscVrPpTbsgOperationalState 1.3.6.1.4.1.562.36.2.1.100.3.13.14.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscVrPpTbsgUsageState 1.3.6.1.4.1.562.36.2.1.100.3.13.14.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscVrPpTbsgOperStatusTable 1.3.6.1.4.1.562.36.2.1.100.3.13.15
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbsgOperStatusEntry

mscVrPpTbsgOperStatusEntry 1.3.6.1.4.1.562.36.2.1.100.3.13.15.1
An entry in the mscVrPpTbsgOperStatusTable.
OBJECT-TYPE    
  MscVrPpTbsgOperStatusEntry  

mscVrPpTbsgSnmpOperStatus 1.3.6.1.4.1.562.36.2.1.100.3.13.15.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscVrPpTbsgOperTable 1.3.6.1.4.1.562.36.2.1.100.3.13.16
This group houses all the operational attributes belonging to the base group. The base group of attributes is applicable to all types of bridge ports and represent the common factor between them. These attributes in part, reflect the state of a bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbsgOperEntry

mscVrPpTbsgOperEntry 1.3.6.1.4.1.562.36.2.1.100.3.13.16.1
An entry in the mscVrPpTbsgOperTable.
OBJECT-TYPE    
  MscVrPpTbsgOperEntry  

mscVrPpTbsgPortName 1.3.6.1.4.1.562.36.2.1.100.3.13.16.1.1
The attribute portName is a string of the form 'BridgePortName-i', where BridgePortName is the abbreviation of the corresponding bridge port and i is the instance identifier of the ProtocolPort, the bridge port is provisioned under. For example a TransparentBridgePort provisioned under ProtocolPort/myport would have a name TBP-myport.
OBJECT-TYPE    
  AsciiString SIZE(4..29)  

mscVrPpTbsgUpTime 1.3.6.1.4.1.562.36.2.1.100.3.13.16.1.3
This attribute specifies the accumulated up time of this bridge port since the last reset occurred.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpTbsgDownTime 1.3.6.1.4.1.562.36.2.1.100.3.13.16.1.4
This attribute specifies the accumulated down time of this bridge port since the last reset occurred.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpTbsgBridgingMode 1.3.6.1.4.1.562.36.2.1.100.3.13.16.1.5
This attribute specifies the mode of bridging this port can support. It in turn implies the format of frames, this bridge port can process and forward.
OBJECT-TYPE    
  INTEGER unknown(1), tb(2), sr(3), srt(4)  

mscVrPpTbsgBridgePortConfig 1.3.6.1.4.1.562.36.2.1.100.3.13.16.1.6
This attribute specifies the bridge port's configuration. It indicates if the bridge port is operating as an access port or as a backbone port. An access bridge port does not encapsulate a MAC frame and does not preserve domain information in the encapsulation, whereas a backbone bridge port encapsulates the MAC frame and optionally preserves domain information in the encapsulated frame.A backbone bridge port is typically used to transport frames across a high bandwidth backbone network to another bridge unit for further processing/forwarding of the frame.
OBJECT-TYPE    
  INTEGER access(1), backbone(2)  

mscVrPpTbsgBridgePortType 1.3.6.1.4.1.562.36.2.1.100.3.13.16.1.7
This attribute specifies the type of bridge port that was provisioned. It takes into consideration the bridgingMode, bridgePortConfig and the media the bridge port is linked to before branding a bridge port.
OBJECT-TYPE    
  INTEGER ethernetBridgePort(0), tokenRingBridgePort(1), fddiBridgePort(2), tokenBusBridgePort(3), fddiEncapsulatingBridgePort(4), vnsBridgePort(5), frameRelayBridgePort(6), pppBridgePort(7), smdsBridgePort(8), vcpBridgePort(9), x25BridgePort(10), srEncapSrBridgePort(11), srEncapTbBridgePort(12), sourceGateSrBridgePort(13), sourceGateTbBridgePort(14), srtbBridgePort(15), tbsrBridgePort(16), clusterSrBridgePort(17), clusterTbBridgePort(18), unknown(19), atmMpeBridgePort(20), snaDlrBridgePort(21), lanEmulationClientEthernet(22)  

mscVrPpTbsgIfIndex 1.3.6.1.4.1.562.36.2.1.100.3.13.16.1.8
This attribute specifies the index into the Interface Table where in information about the media interface corresponding to the bridge port is maintained.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscVrPpTbsgDelayExceededDiscards 1.3.6.1.4.1.562.36.2.1.100.3.13.16.1.10
This attribute is indicative of the number of frames that were discarded because the time taken to process these frames exceeded the transit delay allowed for this bridge unit. This attribute is not supported by bridging and will always have a value of 0.
OBJECT-TYPE    
  Counter32  

mscVrPpTbsgMtuExceededDiscards 1.3.6.1.4.1.562.36.2.1.100.3.13.16.1.11
This attribute is indicative of the number of frames discarded because the size of the out bound frame exceeded the message transfer unit (mtu) allowed for the bridge port. Note that this counter only refers to the outbound frames for this bridge port. This counter wraps around its maximum value of 4294967295. This counter is influenced by the attribute fragmentIp. This counter is incremented when the a frame larger than the mtu allowed is encountered and cannot be fragmented. If this counter is increasing steadily, it might be useful to set the value of the attribute fragmentIp to a value of on.
OBJECT-TYPE    
  Counter32  

mscVrPpTbsgTbOperTable 1.3.6.1.4.1.562.36.2.1.100.3.13.17
This group houses all the port specific operational attributes that belong to the Tb group. This group also houses all the port specific statistical attributes that belong to the Tb group. The Tb group is only applicable bridge port types that operate in the TB mode. These attributes reflect the state of a bridge port operating in the TB mode
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbsgTbOperEntry

mscVrPpTbsgTbOperEntry 1.3.6.1.4.1.562.36.2.1.100.3.13.17.1
An entry in the mscVrPpTbsgTbOperTable.
OBJECT-TYPE    
  MscVrPpTbsgTbOperEntry  

mscVrPpTbsgMaxInfo 1.3.6.1.4.1.562.36.2.1.100.3.13.17.1.2
This attribute specifies the maximum size of the information field in a TB frame. This excludes the header field.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpTbsgBadVerifyDiscards 1.3.6.1.4.1.562.36.2.1.100.3.13.17.1.3
This attribute is indicative of the number of incoming frames that were discarded because: a) the value of the secureOption attribute was set to on and b) it is not allowed to receive frames originating from the mac address found in the source address field of the frame (source mac address look up in the forwarding table failed.) on this bridge port. c) for the destination mac address found in the frame, the port the frame was received on does not appear as in port in the corresponding static table entry. Permission to receive frames from a mac address is granted via the static table entries. This attribute, badVerifyDiscards, is directly influenced by: 1. secureOption and 2. the static table entries. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbsgUnicastNoMatches 1.3.6.1.4.1.562.36.2.1.100.3.13.17.1.4
This attribute is indicative of the number frames discarded because the MAC address found in the destination field did not match the local MAC address of the bridge port. This counter is only applicable for the protocols that are being routed currently.This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbsgStaticEntryDiscards 1.3.6.1.4.1.562.36.2.1.100.3.13.17.1.5
This attribute is indicative of the number of frames that were discarded because of the following two reasons: a) there was no entry for the 'allowed to go' field in the static table entry, where the input port is this bridge port. b) for spanning tree bpdus that are locally processed. This counter wraps around its maximum value of 4294967295. It might prove useful to check the static table entry corresponding to the bridge port in question, if this counter consistently displays a high value. Ideally this counter should be as low as possible.
OBJECT-TYPE    
  Counter32  

mscVrPpTbsgDynamicEntryDiscards 1.3.6.1.4.1.562.36.2.1.100.3.13.17.1.6
This attribute is indicative of the number of incoming frames that a) were discarded because of the fact that the bridge port, the frame is to go out of matches the bridge port it came in from or b) if the stp port state of the out port is not forwarding. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbsgLearningDiscards 1.3.6.1.4.1.562.36.2.1.100.3.13.17.1.7
This attribute is indicative of the number of frames that were discarded while this bridge port was in a state other than the forwarding state. While in learning state the frame is discarded after the information from its header is learnt. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbsgInDiscards 1.3.6.1.4.1.562.36.2.1.100.3.13.17.1.8
This attribute is indicative of the number of frames that were received by this bridge port and were discarded by the forwarding process. This includes frames that could have been discarded due to filtering. A repidly increasing value for this attribute could indicate a shrtage of resource in terms of memory needed to process the incoming frames. More memory can be provisioned through the VirtualRouter's memory manager.
OBJECT-TYPE    
  Counter32  

mscVrPpTbsgInFrames 1.3.6.1.4.1.562.36.2.1.100.3.13.17.1.9
This attribute is indicative of the number of frames that have been received by this port from its segment. Note that a frame received on this bridge port is counted if and only if it can be processed by the bridge logic contained in this bridge unit, a protocol that can be processed by the bridge logic. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbsgOutFrames 1.3.6.1.4.1.562.36.2.1.100.3.13.17.1.10
This attribute is indicative of the number of frames that have been transmitted out this bridge port. Note that frame transmitted out this bridge port is counted if and only if it is for a protocol being processed by the bridge unit. This also includes management frames.This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbsgStpOperTable 1.3.6.1.4.1.562.36.2.1.100.3.13.18
This group houses all the port specific operational attributes that belong to the Stp group. The Stp group is applicable to all the bridge ports that participate in the spanning tree protocol. These attributes reflect the state of the bridge port's participation in the spanning tree protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbsgStpOperEntry

mscVrPpTbsgStpOperEntry 1.3.6.1.4.1.562.36.2.1.100.3.13.18.1
An entry in the mscVrPpTbsgStpOperTable.
OBJECT-TYPE    
  MscVrPpTbsgStpOperEntry  

mscVrPpTbsgStpPortState 1.3.6.1.4.1.562.36.2.1.100.3.13.18.1.2
This attribute specifies the spanning tree protocol state of the bridge port.
OBJECT-TYPE    
  INTEGER disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6)  

mscVrPpTbsgStpTypeOper 1.3.6.1.4.1.562.36.2.1.100.3.13.18.1.3
This attribute specifies the type of spanning tree protocol the port is participating in. A bridge port could participate in either the ieee8021 spanning tree protocol or the dec spanning tree protocol.
OBJECT-TYPE    
  INTEGER none(0), dec(2), ieee8021(3)  

mscVrPpTbsgDesignatedCost 1.3.6.1.4.1.562.36.2.1.100.3.13.18.1.4
This attribute specifies the path cost of the designated port of the lan segment connected to the port.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpTbsgPathCostOper 1.3.6.1.4.1.562.36.2.1.100.3.13.18.1.5
This attribute specifies the contribution of this port, to all the paths to the root bridge that include this port. This attribute pathCostOper will track the value of the attribute pathCostProv when the value of the attribute pathCostMethod is set of off.
OBJECT-TYPE    
  Unsigned32 1..65535  

mscVrPpTbsgDesignatedBridge 1.3.6.1.4.1.562.36.2.1.100.3.13.18.1.6
This attribute specifies the identifier of the bridge that this port considers to be the designated bridge.
OBJECT-TYPE    
  BridgeId SIZE(8)  

mscVrPpTbsgDesignatedPort 1.3.6.1.4.1.562.36.2.1.100.3.13.18.1.7
This attribute specifies the port identifier of the port on the designated bridge, attached to the same lan as this port is attached to.
OBJECT-TYPE    
  Hex 0..65535  

mscVrPpTbsgForwardTransitions 1.3.6.1.4.1.562.36.2.1.100.3.13.18.1.8
This attribute is indicative of the number of times this bridge port transitioned from the learning state to the forwarding state. This counter wraps around its maximum value of 4294967295. A rapidly increasing value might be indicative of an unstable spanning tree topology.
OBJECT-TYPE    
  Counter32  

mscVrPpTbsgBlockingDiscards 1.3.6.1.4.1.562.36.2.1.100.3.13.18.1.9
This attribute is indicative of the number of incoming frames that were discarded because the bridge port was in the blocking state. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbsgDesignatedRoot 1.3.6.1.4.1.562.36.2.1.100.3.13.18.1.10
This attribute specifies the bridge identifier of the bridge recorded as the root bridge, in the configuration BPDUs sent out by the designated bridge on the segment to which the port is attached.
OBJECT-TYPE    
  BridgeId SIZE(8)  

mscVrPpTbsgStatsTable 1.3.6.1.4.1.562.36.2.1.100.3.13.19
This group houses all the statistical attributes applicable to all types of bridge ports and represents the common factor between them. These attributes in part reflect the state of the bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpTbsgStatsEntry

mscVrPpTbsgStatsEntry 1.3.6.1.4.1.562.36.2.1.100.3.13.19.1
An entry in the mscVrPpTbsgStatsTable.
OBJECT-TYPE    
  MscVrPpTbsgStatsEntry  

mscVrPpTbsgBadAbstractDiscards 1.3.6.1.4.1.562.36.2.1.100.3.13.19.1.1
This attribute is indicative of the number of frames that were discarded because the data that was abstracted, from frames coming in through this bridge port, did not conform to the format expected by the bridge logic.This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbsgTinygramFramesIn 1.3.6.1.4.1.562.36.2.1.100.3.13.19.1.2
This attribute is indicative of the number of frames received on this bridge port that used the tinygram compression scheme.
OBJECT-TYPE    
  Counter32  

mscVrPpTbsgTinygramFramesOut 1.3.6.1.4.1.562.36.2.1.100.3.13.19.1.3
This attribute is indicative of the number of frames transmitted out this bridge port that used the tinygram compression scheme.
OBJECT-TYPE    
  Counter32  

mscVrPpTbsgInFilterDiscards 1.3.6.1.4.1.562.36.2.1.100.3.13.19.1.4
This attribute is indicative of the number of frames discarded at the in filter point. This includes a) frames discarded due to application of the filter defined with PCF for the in filter point and b) the frames discarded due to domain based filtering at the in filter point. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpTbsgOutFilterDiscards 1.3.6.1.4.1.562.36.2.1.100.3.13.19.1.5
This attribute is indicative of the number of frames discarded at the out filter point. This includes: a) frames discarded due to application of the filter defined with PCF for the out filter point and b) the frames discarded due to domain based filtering at the out filter point. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpSrcl 1.3.6.1.4.1.562.36.2.1.100.3.14
OBJECT IDENTIFIER    

mscVrPpSrclRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.3.14.1
This entry controls the addition and deletion of mscVrPpSrcl components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrclRowStatusEntry

mscVrPpSrclRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.3.14.1.1
A single entry in the table represents a single mscVrPpSrcl component.
OBJECT-TYPE    
  MscVrPpSrclRowStatusEntry  

mscVrPpSrclRowStatus 1.3.6.1.4.1.562.36.2.1.100.3.14.1.1.1
This variable is used as the basis for SNMP naming of mscVrPpSrcl components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscVrPpSrclComponentName 1.3.6.1.4.1.562.36.2.1.100.3.14.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscVrPpSrclStorageType 1.3.6.1.4.1.562.36.2.1.100.3.14.1.1.4
This variable represents the storage type value for the mscVrPpSrcl tables.
OBJECT-TYPE    
  StorageType  

mscVrPpSrclIndex 1.3.6.1.4.1.562.36.2.1.100.3.14.1.1.10
This variable represents the index for the mscVrPpSrcl tables.
OBJECT-TYPE    
  NonReplicated  

mscVrPpSrclNs 1.3.6.1.4.1.562.36.2.1.100.3.14.2
OBJECT IDENTIFIER    

mscVrPpSrclNsRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.3.14.2.1
This entry controls the addition and deletion of mscVrPpSrclNs components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrclNsRowStatusEntry

mscVrPpSrclNsRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.3.14.2.1.1
A single entry in the table represents a single mscVrPpSrclNs component.
OBJECT-TYPE    
  MscVrPpSrclNsRowStatusEntry  

mscVrPpSrclNsRowStatus 1.3.6.1.4.1.562.36.2.1.100.3.14.2.1.1.1
This variable is used as the basis for SNMP naming of mscVrPpSrclNs components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscVrPpSrclNsComponentName 1.3.6.1.4.1.562.36.2.1.100.3.14.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscVrPpSrclNsStorageType 1.3.6.1.4.1.562.36.2.1.100.3.14.2.1.1.4
This variable represents the storage type value for the mscVrPpSrclNs tables.
OBJECT-TYPE    
  StorageType  

mscVrPpSrclNsIndex 1.3.6.1.4.1.562.36.2.1.100.3.14.2.1.1.10
This variable represents the index for the mscVrPpSrclNs tables.
OBJECT-TYPE    
  NonReplicated  

mscVrPpSrclNsProvTable 1.3.6.1.4.1.562.36.2.1.100.3.14.2.10
This group houses all the port specific provisionable attributes associated with Ns. These attributes influence the application of filters to incoming and outgoing frames.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrclNsProvEntry

mscVrPpSrclNsProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.14.2.10.1
An entry in the mscVrPpSrclNsProvTable.
OBJECT-TYPE    
  MscVrPpSrclNsProvEntry  

mscVrPpSrclNsIncomingFilter 1.3.6.1.4.1.562.36.2.1.100.3.14.2.10.1.2
This attribute specifies the name of the filter to be applied at the incoming filter point.
OBJECT-TYPE    
  AsciiString SIZE(0..32)  

mscVrPpSrclNsOutgoingFilter 1.3.6.1.4.1.562.36.2.1.100.3.14.2.10.1.3
This attribute specifies the name of the filter to be applied at the out going filter point.
OBJECT-TYPE    
  AsciiString SIZE(0..32)  

mscVrPpSrclProvTable 1.3.6.1.4.1.562.36.2.1.100.3.14.10
This group houses all the provisionable attributes that belong to the this group. This group of attributes is applicable to all types of bridge ports and represent the common factor between them. These attributes influence the working of a bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrclProvEntry

mscVrPpSrclProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.14.10.1
An entry in the mscVrPpSrclProvTable.
OBJECT-TYPE    
  MscVrPpSrclProvEntry  

mscVrPpSrclTranslateIpx 1.3.6.1.4.1.562.36.2.1.100.3.14.10.1.1
This attribute specifies the type of translation to be performed on frames carrying IPX packets. Ethernet frames carrying IPX payload could be translated to IEEE 802.3 frames (with the same IPX payload) or vice- versa. The main reason to do so is to allow the bridge unit to consistently forward one type of frames carrying IPX packets. Translations can be turned off altogether in which case the IPX frames will pass through the bridge unit unchanged.
OBJECT-TYPE    
  INTEGER off(0), ieee8023(1), ethernet(2), snap(3), sap(4)  

mscVrPpSrclFragmentIp 1.3.6.1.4.1.562.36.2.1.100.3.14.10.1.2
This attribute specifies if or not outbound frames carrying IP datagrams should be fragmented to conform to message transfer unit (mtu) sizes dictated by the media.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpSrclServiceClass 1.3.6.1.4.1.562.36.2.1.100.3.14.10.1.3
This attribute specifies if the frames should be ordered or not before they are transmitted through a bridge port. If this attribute has a value of ordered the received frames are ordered as in the original message, before they are transmitted out through a bridge port. If it has a value of notOrdered, received then frames pass through the bridge unit in the order they are received. This feature can be used over multiple telecommunication links to increase data flow. Please note that this attribute only affects link protocols and is ineffective with lan media.
OBJECT-TYPE    
  INTEGER ordered(0), notOrdered(1)  

mscVrPpSrclConvertArpMacAddress 1.3.6.1.4.1.562.36.2.1.100.3.14.10.1.4
This attribute is indicative of the state of the MAC address format conversion process for ARP/RARP frames. The MAC addresses may be translated if need be from a canonical format to a non-canonical format, based on the needs of the associated media. If this attribute is set to a value of on then all Mac addresses will converted if need be to suit the format of mac address, the outgoing media will support. If this attribute is set to a value of off no such conversion takes place.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpSrclPortNum 1.3.6.1.4.1.562.36.2.1.100.3.14.10.1.5
This attribute is indicative of the unique number assigned to the bridge port. It is used for SNMP management of this bridge port and in spanning tree as an identifier this bridge port. Notes regarding portNum: Escape routines exist for initializing, copying, and deleting port numbers. This is necessary because SNMP requires a unique port instance identifier. The initPortNum escape routine sets the port number to a value in the range 1-255 for this purpose. The setCopiedPortNum escape routine exists to maintain the uniqueness of the port number in cases when one port is copied to another. When a bridge port is deleted, the releasePortNum escape routine places the port number being released into a pending deletion state. This is because the port number cannot be re-allocated until the port is truely deleted in the current view. This is necessary since there is no guarantee of order when processing changes to multiple protocol ports so without the pending deletion state, the same port number could be temporarily assigned to two ports for a short period of time. The portNum is set as component critical since bridging also uses the port number as a key for indexing into its data structures. If a port is deleted then re-added under the same protocol port, CAS treats the change as a SET to the portNum attribute.
OBJECT-TYPE    
  Unsigned32 0..255  

mscVrPpSrclStpProvTable 1.3.6.1.4.1.562.36.2.1.100.3.14.12
This group houses all the port specific provisionable attributes that belong to the Stp group. The Stp group is applicable to all the bridge ports that participate in the spanning tree protocol. These attributes influence the participation of the bridge port in the spanning tree protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrclStpProvEntry

mscVrPpSrclStpProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.14.12.1
An entry in the mscVrPpSrclStpProvTable.
OBJECT-TYPE    
  MscVrPpSrclStpProvEntry  

mscVrPpSrclAdminStatus 1.3.6.1.4.1.562.36.2.1.100.3.14.12.1.1
This attribute defines the current administrative state for this component. enabled indicates that the component is available for operation. disabled indicates the component is unavailable for operation.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mscVrPpSrclPortStateStpControl 1.3.6.1.4.1.562.36.2.1.100.3.14.12.1.2
This attribute specifies whether or not spanning tree protocol state for this bridge port is controlled by the spanning tree protocol. In essence it indicates the participation of this bridge port in the spanning tree protocol, by accepting and acting on received bridge protocol data units and by sending out the same. on signifies that this bridge port's spanning tree port state is controlled by the spanning tree protocol. A value of off signifies that the spanning tree port state of this bridge port is unaffected by the spanning tree protocol. This in effect puts the bridge port out of reach of the spanning tree protocol and in the forwarding state. Care should be taken while assigning a value of off to this attribute, as this might cause network loops. Please do not set this attribute to off unless you are absolutely sure about the effect of such an action on your network topology.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpSrclStpTypeProv 1.3.6.1.4.1.562.36.2.1.100.3.14.12.1.3
This attribute specifies the type of spanning tree protocol the port is participating in. A bridge port could participate in either the ieee8021 spanning tree protocol or the dec spanning tree protocol. If the value of the attribute protocolSpec in the SpanningTreeProtocol component, provisioned under the TransparentBridge component is in conflict with the value of this attribute, the value of the protocolSpec attribute will prevail. Prevailing stp type is reflected in the value of the attribute stpTypeOper.
OBJECT-TYPE    
  INTEGER dec(2), ieee8021(3)  

mscVrPpSrclPortPriority 1.3.6.1.4.1.562.36.2.1.100.3.14.12.1.4
This attribute specifies the value for port priority, which is contained in the first octet of the port identifier. Valid values are as follows: 1) 0..255 for stp type DEC and 2) 0..65535 for stp type IEEE.
OBJECT-TYPE    
  Unsigned32 0..65535  

mscVrPpSrclPathCost 1.3.6.1.4.1.562.36.2.1.100.3.14.12.1.5
This attribute specifies the contribution of this port, to all the paths to the root bridge that include this port. Please note that the value of the attribute pathCostMethod is applied only when the value of the attribute pathCostMethod is set to on and is ignored if otherwise.
OBJECT-TYPE    
  Unsigned32 1..65535  

mscVrPpSrclPathCostMethod 1.3.6.1.4.1.562.36.2.1.100.3.14.12.1.6
This attribute specifies the method used by the bridging logic, to calculate the path cost to the bridge considered to be the root bridge in the spanning tree topology. This attribute should be set to off before attempting to provision a value for pathCostProv.
OBJECT-TYPE    
  INTEGER off(1), dec(2), ieee8021(3)  

mscVrPpSrclDIProvTable 1.3.6.1.4.1.562.36.2.1.100.3.14.13
This group houses all the provisionable, domain specific attributes for a non-encapsulating bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrclDIProvEntry

mscVrPpSrclDIProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.14.13.1
An entry in the mscVrPpSrclDIProvTable.
OBJECT-TYPE    
  MscVrPpSrclDIProvEntry  

mscVrPpSrclDomainNum 1.3.6.1.4.1.562.36.2.1.100.3.14.13.1.1
This attribute specifies the domain number associated with this bridge port. Domain numbers are used for confining frames to a domain. Domain based filtering provides a complete segregation of traffic based on domain number associated with frames. There can exist only sixteen domains when a spanning tree is desired specific to each domain. When there is only a single spanning tree spanning all the domains the maximum number of domains possible are 4294967293. This attribute is of no relevance when associated with backbone bridge port. Its value is ignored in such a situation.
OBJECT-TYPE    
  Unsigned32 1..4294967293  

mscVrPpSrclPreserveDomain 1.3.6.1.4.1.562.36.2.1.100.3.14.13.1.2
This attribute specifies if the domain information should be preserved or embedded in the frame header. This attribute applies only to backbone ports and does not affect the access bridge ports. By setting this attribute to a value of on, domain information could be preserved in frames being tunnelled across the a backbone, so that this information can be deciphered at the other end of the backbone tunnel. This preserves the integrity of the domains thus preventing domain breaches while tunnelling frames across backbone network. If the value of this attribute is set to off then domain information is not preserved in the header of the frames tunnelling through the backbone. This eliminates the overhead incurred to preserve domain information across the backbone while tunnelling frames across it. Preserve domain is relevant when used in conjunction with the following media: FDDI, ATM MPE, Frame Relay and PPP. It is ignored when used with other types of media.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscVrPpSrclStateTable 1.3.6.1.4.1.562.36.2.1.100.3.14.14
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrclStateEntry

mscVrPpSrclStateEntry 1.3.6.1.4.1.562.36.2.1.100.3.14.14.1
An entry in the mscVrPpSrclStateTable.
OBJECT-TYPE    
  MscVrPpSrclStateEntry  

mscVrPpSrclAdminState 1.3.6.1.4.1.562.36.2.1.100.3.14.14.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscVrPpSrclOperationalState 1.3.6.1.4.1.562.36.2.1.100.3.14.14.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscVrPpSrclUsageState 1.3.6.1.4.1.562.36.2.1.100.3.14.14.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscVrPpSrclOperStatusTable 1.3.6.1.4.1.562.36.2.1.100.3.14.15
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrclOperStatusEntry

mscVrPpSrclOperStatusEntry 1.3.6.1.4.1.562.36.2.1.100.3.14.15.1
An entry in the mscVrPpSrclOperStatusTable.
OBJECT-TYPE    
  MscVrPpSrclOperStatusEntry  

mscVrPpSrclSnmpOperStatus 1.3.6.1.4.1.562.36.2.1.100.3.14.15.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscVrPpSrclOperTable 1.3.6.1.4.1.562.36.2.1.100.3.14.16
This group houses all the operational attributes belonging to the base group. The base group of attributes is applicable to all types of bridge ports and represent the common factor between them. These attributes in part, reflect the state of a bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrclOperEntry

mscVrPpSrclOperEntry 1.3.6.1.4.1.562.36.2.1.100.3.14.16.1
An entry in the mscVrPpSrclOperTable.
OBJECT-TYPE    
  MscVrPpSrclOperEntry  

mscVrPpSrclPortName 1.3.6.1.4.1.562.36.2.1.100.3.14.16.1.1
The attribute portName is a string of the form 'BridgePortName-i', where BridgePortName is the abbreviation of the corresponding bridge port and i is the instance identifier of the ProtocolPort, the bridge port is provisioned under. For example a TransparentBridgePort provisioned under ProtocolPort/myport would have a name TBP-myport.
OBJECT-TYPE    
  AsciiString SIZE(4..29)  

mscVrPpSrclUpTime 1.3.6.1.4.1.562.36.2.1.100.3.14.16.1.3
This attribute specifies the accumulated up time of this bridge port since the last reset occurred.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpSrclDownTime 1.3.6.1.4.1.562.36.2.1.100.3.14.16.1.4
This attribute specifies the accumulated down time of this bridge port since the last reset occurred.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpSrclBridgingMode 1.3.6.1.4.1.562.36.2.1.100.3.14.16.1.5
This attribute specifies the mode of bridging this port can support. It in turn implies the format of frames, this bridge port can process and forward.
OBJECT-TYPE    
  INTEGER unknown(1), tb(2), sr(3), srt(4)  

mscVrPpSrclBridgePortConfig 1.3.6.1.4.1.562.36.2.1.100.3.14.16.1.6
This attribute specifies the bridge port's configuration. It indicates if the bridge port is operating as an access port or as a backbone port. An access bridge port does not encapsulate a MAC frame and does not preserve domain information in the encapsulation, whereas a backbone bridge port encapsulates the MAC frame and optionally preserves domain information in the encapsulated frame.A backbone bridge port is typically used to transport frames across a high bandwidth backbone network to another bridge unit for further processing/forwarding of the frame.
OBJECT-TYPE    
  INTEGER access(1), backbone(2)  

mscVrPpSrclBridgePortType 1.3.6.1.4.1.562.36.2.1.100.3.14.16.1.7
This attribute specifies the type of bridge port that was provisioned. It takes into consideration the bridgingMode, bridgePortConfig and the media the bridge port is linked to before branding a bridge port.
OBJECT-TYPE    
  INTEGER ethernetBridgePort(0), tokenRingBridgePort(1), fddiBridgePort(2), tokenBusBridgePort(3), fddiEncapsulatingBridgePort(4), vnsBridgePort(5), frameRelayBridgePort(6), pppBridgePort(7), smdsBridgePort(8), vcpBridgePort(9), x25BridgePort(10), srEncapSrBridgePort(11), srEncapTbBridgePort(12), sourceGateSrBridgePort(13), sourceGateTbBridgePort(14), srtbBridgePort(15), tbsrBridgePort(16), clusterSrBridgePort(17), clusterTbBridgePort(18), unknown(19), atmMpeBridgePort(20), snaDlrBridgePort(21), lanEmulationClientEthernet(22)  

mscVrPpSrclIfIndex 1.3.6.1.4.1.562.36.2.1.100.3.14.16.1.8
This attribute specifies the index into the Interface Table where in information about the media interface corresponding to the bridge port is maintained.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscVrPpSrclDelayExceededDiscards 1.3.6.1.4.1.562.36.2.1.100.3.14.16.1.10
This attribute is indicative of the number of frames that were discarded because the time taken to process these frames exceeded the transit delay allowed for this bridge unit. This attribute is not supported by bridging and will always have a value of 0.
OBJECT-TYPE    
  Counter32  

mscVrPpSrclMtuExceededDiscards 1.3.6.1.4.1.562.36.2.1.100.3.14.16.1.11
This attribute is indicative of the number of frames discarded because the size of the out bound frame exceeded the message transfer unit (mtu) allowed for the bridge port. Note that this counter only refers to the outbound frames for this bridge port. This counter wraps around its maximum value of 4294967295. This counter is influenced by the attribute fragmentIp. This counter is incremented when the a frame larger than the mtu allowed is encountered and cannot be fragmented. If this counter is increasing steadily, it might be useful to set the value of the attribute fragmentIp to a value of on.
OBJECT-TYPE    
  Counter32  

mscVrPpSrclStpOperTable 1.3.6.1.4.1.562.36.2.1.100.3.14.18
This group houses all the port specific operational attributes that belong to the Stp group. The Stp group is applicable to all the bridge ports that participate in the spanning tree protocol. These attributes reflect the state of the bridge port's participation in the spanning tree protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrclStpOperEntry

mscVrPpSrclStpOperEntry 1.3.6.1.4.1.562.36.2.1.100.3.14.18.1
An entry in the mscVrPpSrclStpOperTable.
OBJECT-TYPE    
  MscVrPpSrclStpOperEntry  

mscVrPpSrclStpPortState 1.3.6.1.4.1.562.36.2.1.100.3.14.18.1.2
This attribute specifies the spanning tree protocol state of the bridge port.
OBJECT-TYPE    
  INTEGER disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6)  

mscVrPpSrclStpTypeOper 1.3.6.1.4.1.562.36.2.1.100.3.14.18.1.3
This attribute specifies the type of spanning tree protocol the port is participating in. A bridge port could participate in either the ieee8021 spanning tree protocol or the dec spanning tree protocol.
OBJECT-TYPE    
  INTEGER none(0), dec(2), ieee8021(3)  

mscVrPpSrclDesignatedCost 1.3.6.1.4.1.562.36.2.1.100.3.14.18.1.4
This attribute specifies the path cost of the designated port of the lan segment connected to the port.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrPpSrclPathCostOper 1.3.6.1.4.1.562.36.2.1.100.3.14.18.1.5
This attribute specifies the contribution of this port, to all the paths to the root bridge that include this port. This attribute pathCostOper will track the value of the attribute pathCostProv when the value of the attribute pathCostMethod is set of off.
OBJECT-TYPE    
  Unsigned32 1..65535  

mscVrPpSrclDesignatedBridge 1.3.6.1.4.1.562.36.2.1.100.3.14.18.1.6
This attribute specifies the identifier of the bridge that this port considers to be the designated bridge.
OBJECT-TYPE    
  BridgeId SIZE(8)  

mscVrPpSrclDesignatedPort 1.3.6.1.4.1.562.36.2.1.100.3.14.18.1.7
This attribute specifies the port identifier of the port on the designated bridge, attached to the same lan as this port is attached to.
OBJECT-TYPE    
  Hex 0..65535  

mscVrPpSrclForwardTransitions 1.3.6.1.4.1.562.36.2.1.100.3.14.18.1.8
This attribute is indicative of the number of times this bridge port transitioned from the learning state to the forwarding state. This counter wraps around its maximum value of 4294967295. A rapidly increasing value might be indicative of an unstable spanning tree topology.
OBJECT-TYPE    
  Counter32  

mscVrPpSrclBlockingDiscards 1.3.6.1.4.1.562.36.2.1.100.3.14.18.1.9
This attribute is indicative of the number of incoming frames that were discarded because the bridge port was in the blocking state. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpSrclDesignatedRoot 1.3.6.1.4.1.562.36.2.1.100.3.14.18.1.10
This attribute specifies the bridge identifier of the bridge recorded as the root bridge, in the configuration BPDUs sent out by the designated bridge on the segment to which the port is attached.
OBJECT-TYPE    
  BridgeId SIZE(8)  

mscVrPpSrclStatsTable 1.3.6.1.4.1.562.36.2.1.100.3.14.19
This group houses all the statistical attributes applicable to all types of bridge ports and represents the common factor between them. These attributes in part reflect the state of the bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrclStatsEntry

mscVrPpSrclStatsEntry 1.3.6.1.4.1.562.36.2.1.100.3.14.19.1
An entry in the mscVrPpSrclStatsTable.
OBJECT-TYPE    
  MscVrPpSrclStatsEntry  

mscVrPpSrclBadAbstractDiscards 1.3.6.1.4.1.562.36.2.1.100.3.14.19.1.1
This attribute is indicative of the number of frames that were discarded because the data that was abstracted, from frames coming in through this bridge port, did not conform to the format expected by the bridge logic.This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpSrclTinygramFramesIn 1.3.6.1.4.1.562.36.2.1.100.3.14.19.1.2
This attribute is indicative of the number of frames received on this bridge port that used the tinygram compression scheme.
OBJECT-TYPE    
  Counter32  

mscVrPpSrclTinygramFramesOut 1.3.6.1.4.1.562.36.2.1.100.3.14.19.1.3
This attribute is indicative of the number of frames transmitted out this bridge port that used the tinygram compression scheme.
OBJECT-TYPE    
  Counter32  

mscVrPpSrclInFilterDiscards 1.3.6.1.4.1.562.36.2.1.100.3.14.19.1.4
This attribute is indicative of the number of frames discarded at the in filter point. This includes a) frames discarded due to application of the filter defined with PCF for the in filter point and b) the frames discarded due to domain based filtering at the in filter point. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpSrclOutFilterDiscards 1.3.6.1.4.1.562.36.2.1.100.3.14.19.1.5
This attribute is indicative of the number of frames discarded at the out filter point. This includes: a) frames discarded due to application of the filter defined with PCF for the out filter point and b) the frames discarded due to domain based filtering at the out filter point. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrPpSrclSrProvTable 1.3.6.1.4.1.562.36.2.1.100.3.14.20
This group contains all port specific, provisionable attributes associated with SourceRouteBridge ports.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrclSrProvEntry

mscVrPpSrclSrProvEntry 1.3.6.1.4.1.562.36.2.1.100.3.14.20.1
An entry in the mscVrPpSrclSrProvTable.
OBJECT-TYPE    
  MscVrPpSrclSrProvEntry  

mscVrPpSrclHopCount 1.3.6.1.4.1.562.36.2.1.100.3.14.20.1.1
This attribute specifies the maximum number of hops allowed in Spanning Tree Explore and All Routes Explore frames. This value is one less than the maximum number of route descriptors allowed in a source route frame
OBJECT-TYPE    
  Unsigned32 1..7  

mscVrPpSrclExploreFrameTreatment 1.3.6.1.4.1.562.36.2.1.100.3.14.20.1.2
This attribute specifies whether or not explore frames received from SourceRouteBridge ports will be sent to the SRTB-8209 translation or the encapsulated SourceRouteBridge logic. This option is used only when both the TbsrBridgePort and the SrtbBridgePort are provisioned and enabled. A value of Xlate implies that the explore frames will be sent to the Srtb translation logic and a value of Encap implies that the frames will be sent to the Encapsulated source route bridging logic.
OBJECT-TYPE    
  INTEGER encap(0), xlate(1)  

mscVrPpSrclLanId 1.3.6.1.4.1.562.36.2.1.100.3.14.20.1.3
This attribute specifies the identifier for the physical LAN that this port is attached. All SourceRouteBridge ports are assigned to a physical LAN and a logical internal LAN. Current source route bridge implementations limit the lanId to a value in the range 0 to 4095.
OBJECT-TYPE    
  Unsigned32 0..4095  

mscVrPpSrclInternalLanId 1.3.6.1.4.1.562.36.2.1.100.3.14.20.1.4
This attribute specifies the identifier for the internal logical LAN this port is attached. All SourceRouteBridge ports are assigned to a physical LAN and a logical internal LAN. Current source route bridge implementations limit the lanId to a value in the range 0 to 4095.
OBJECT-TYPE    
  Unsigned32 0..4095  

mscVrPpSrclBridgeNum 1.3.6.1.4.1.562.36.2.1.100.3.14.20.1.5
This attribute specifies the value that is used to identify this bridge when more than one bridge is used to span the same two LAN segments.
OBJECT-TYPE    
  Unsigned32 0..15  

mscVrPpSrclLargestFrame 1.3.6.1.4.1.562.36.2.1.100.3.14.20.1.6
This attribute specifies the maximum frame size (LLC and above) in octets, allowed by this SourceRouteBridge port. This field is used to determine whether a modification of the largest frame field of the routing control field of the routing information field is warranted.
OBJECT-TYPE    
  Unsigned32 516 | 1470 | 2052 | 4399 | 8130 | 11407 | 17749  

mscVrPpSrclSteSpanMode 1.3.6.1.4.1.562.36.2.1.100.3.14.20.1.7
This attribute determines how this bridge port will react when presented with a Spanning Tree Explore frame. If disabled, the Spanning Tree Explore frame is discarded regardless of the value of stpPortState. If the value of this attribute is forced, the Spanning Tree Explore frame is forwarded regardless of the value of stpPortState. autoSpan uses the stpPortState value to decide whether or not Spanning Tree Explore frames should be forwarded out this bridge port. If the port is in the forwarding state, the frame is received and transmitted otherwise the frame is discarded.
OBJECT-TYPE    
  INTEGER autoSpan(1), disabled(2), forced(3)  

mscVrPpSrclAreRdLimit 1.3.6.1.4.1.562.36.2.1.100.3.14.20.1.8
This attribute specifies the number of route descriptors allowed in an All Routes Explore frame received on a SourceRouteBridgePort or SourceRouteTransparentBridgePort. Current source route bridge implementations limit the areRdLimit to a value in the range 0 to 8.
OBJECT-TYPE    
  Unsigned32 0..8  

mscVrPpSrclSteRdLimit 1.3.6.1.4.1.562.36.2.1.100.3.14.20.1.9
This attribute specifies the number of route descriptors allowed in a Spanning Tree Explore frame received on a SourceRouteBridgePort or SourceRouteTransparentBridgePort. Current source route bridge implementations limit the steRdLimit to a value in the range 0 to 8.
OBJECT-TYPE    
  Unsigned32 0..8  

mscVrPpSrclSrStatsTable 1.3.6.1.4.1.562.36.2.1.100.3.14.21
This group contains all port specific statistical attributes associated with SourceRouteBridge ports.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrPpSrclSrStatsEntry

mscVrPpSrclSrStatsEntry 1.3.6.1.4.1.562.36.2.1.100.3.14.21.1
An entry in the mscVrPpSrclSrStatsTable.
OBJECT-TYPE    
  MscVrPpSrclSrStatsEntry  

mscVrPpSrclSpecInFrames 1.3.6.1.4.1.562.36.2.1.100.3.14.21.1.1
This attribute specifies the number of specifically routed frames that were received by this bridge port. A specifically routed frame has a route descriptor, constructed by the originating host which details an explicit route to the destination host. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrclSpecOutFrames 1.3.6.1.4.1.562.36.2.1.100.3.14.21.1.2
This attribute specifies the number of specifically routed frames that were transmitted from this bridge port. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrclApeInFrames 1.3.6.1.4.1.562.36.2.1.100.3.14.21.1.3
This attribute specifies the number of All Path Explore frames received on this bridge port. The All Path Explore frames are forwarded to all SourceRouteBridge ports assigned to this bridge regardless of the port's portStpStates. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrclApeOutFrames 1.3.6.1.4.1.562.36.2.1.100.3.14.21.1.4
This attribute specifies the number of All Path Explore frames transmitted on this bridge port. The All Path Explore frames are forwarded to all SourceRouteBridge ports assigned to this bridge regardless of the port's portStpState state. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrclSteInFrames 1.3.6.1.4.1.562.36.2.1.100.3.14.21.1.5
This attribute specifies the number of Spanning Tree Explore frames received on this bridge port. The Spanning Tree Explore frames are only forwarded through bridge ports whose portStpState has a value of forwarding. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrclSteOutFrames 1.3.6.1.4.1.562.36.2.1.100.3.14.21.1.6
This attribute specifies the number of Spanning Tree Frames transmitted on this bridge port. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrclSegmentMismatchDiscards 1.3.6.1.4.1.562.36.2.1.100.3.14.21.1.7
This attribute specifies the number of All Routes Explore and Spanning Tree Explore frames that were discarded due to an invalid next segment value in the routing information field. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrclDupSegmentDiscards 1.3.6.1.4.1.562.36.2.1.100.3.14.21.1.8
This attribute specifies the number of frames discarded due to the presence of a duplicate segment identifier in the route descriptor field which may indicate a loop in the network topology. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrclHopCountExceededDiscards 1.3.6.1.4.1.562.36.2.1.100.3.14.21.1.9
This attribute specifies the number of All Routes Explore and Spanning Tree Explore frames discarded by this bridge port due to a frame exceeding the maximum size allowed for a route descriptor length. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrclDupLanIdOrTreeErrors 1.3.6.1.4.1.562.36.2.1.100.3.14.21.1.10
This attribute specifies the number frames received which contain duplicate LAN IDs or Tree errors. This attribute is helpful in debugging problems in networks which contain older IBM-SR bridges. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrclLanIdMismatches 1.3.6.1.4.1.562.36.2.1.100.3.14.21.1.11
This attributes counts the number of All Routes Explore or Spanning Tree Explore frames that were discarded because the last LAN ID in the routing information field did not equal the LAN ID. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrclStaticDiscards 1.3.6.1.4.1.562.36.2.1.100.3.14.21.1.12
This attribute is indicative of the number of explorer frames discarded due to fact that the outbound SourceRouteBridge port was disabled or deleted. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrPpSrclDynamicDiscards 1.3.6.1.4.1.562.36.2.1.100.3.14.21.1.13
This attribute specifies the number of frames discarded due to receiving a frame with a target LAN ID which did not match the internal LAN ID of the receiving bridge port. This counter will wrap to zero when it exceeds its maximum.
OBJECT-TYPE    
  Counter32  

mscVrBr 1.3.6.1.4.1.562.36.2.1.100.5
OBJECT IDENTIFIER    

mscVrBrRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.5.1
This entry controls the addition and deletion of mscVrBr components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrBrRowStatusEntry

mscVrBrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.5.1.1
A single entry in the table represents a single mscVrBr component.
OBJECT-TYPE    
  MscVrBrRowStatusEntry  

mscVrBrRowStatus 1.3.6.1.4.1.562.36.2.1.100.5.1.1.1
This variable is used as the basis for SNMP naming of mscVrBr components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscVrBrComponentName 1.3.6.1.4.1.562.36.2.1.100.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscVrBrStorageType 1.3.6.1.4.1.562.36.2.1.100.5.1.1.4
This variable represents the storage type value for the mscVrBr tables.
OBJECT-TYPE    
  StorageType  

mscVrBrIndex 1.3.6.1.4.1.562.36.2.1.100.5.1.1.10
This variable represents the index for the mscVrBr tables.
OBJECT-TYPE    
  NonReplicated  

mscVrBrPte 1.3.6.1.4.1.562.36.2.1.100.5.2
OBJECT IDENTIFIER    

mscVrBrPteRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.5.2.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrBrPte components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrBrPteRowStatusEntry

mscVrBrPteRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.5.2.1.1
A single entry in the table represents a single mscVrBrPte component.
OBJECT-TYPE    
  MscVrBrPteRowStatusEntry  

mscVrBrPteRowStatus 1.3.6.1.4.1.562.36.2.1.100.5.2.1.1.1
This variable is used as the basis for SNMP naming of mscVrBrPte components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscVrBrPteComponentName 1.3.6.1.4.1.562.36.2.1.100.5.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscVrBrPteStorageType 1.3.6.1.4.1.562.36.2.1.100.5.2.1.1.4
This variable represents the storage type value for the mscVrBrPte tables.
OBJECT-TYPE    
  StorageType  

mscVrBrPteDomainNumIndex 1.3.6.1.4.1.562.36.2.1.100.5.2.1.1.10
This variable represents an index for the mscVrBrPte tables.
OBJECT-TYPE    
  Integer32 1..268435455  

mscVrBrPtePortNameIndex 1.3.6.1.4.1.562.36.2.1.100.5.2.1.1.11
This variable represents an index for the mscVrBrPte tables.
OBJECT-TYPE    
  AsciiStringIndex SIZE(0..29)  

mscVrBrPteModeIndex 1.3.6.1.4.1.562.36.2.1.100.5.2.1.1.12
This variable represents an index for the mscVrBrPte tables.
OBJECT-TYPE    
  INTEGER tb(2), sr(3), srt(4)  

mscVrBrPteOperTable 1.3.6.1.4.1.562.36.2.1.100.5.2.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group houses all the operational attributes belonging to the PortTableEntry component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrBrPteOperEntry

mscVrBrPteOperEntry 1.3.6.1.4.1.562.36.2.1.100.5.2.10.1
An entry in the mscVrBrPteOperTable.
OBJECT-TYPE    
  MscVrBrPteOperEntry  

mscVrBrPteMacType 1.3.6.1.4.1.562.36.2.1.100.5.2.10.1.1
This attribute is indicative of the Mac type of the bridge port is associated with.
OBJECT-TYPE    
  INTEGER ethernet(0), tokenRing(1), fddiBridgePort(2), tokenBus(3), fddiEncapsulating(4), vns(5), frameRelay(6), ppp(7), smds(8), vcp(9), x25(10), srEncapSr(11), srEncapTb(12), sourceGateSr(13), sourceGateTb(14), srtb(15), tbsr(16), clusterSr(17), clusterTb(18), unknown(19), atmMpe(20), snaDlr(21), lecEthernet(22)  

mscVrBrPteStpState 1.3.6.1.4.1.562.36.2.1.100.5.2.10.1.2
This attribute is indicative of the stp state of the bridge port.
OBJECT-TYPE    
  INTEGER disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6)  

mscVrBrPteStpType 1.3.6.1.4.1.562.36.2.1.100.5.2.10.1.3
This attribute specifies the type of the spanning tree protocol this bridge port is participating in.
OBJECT-TYPE    
  INTEGER unknown(1), dec(2), ieee8021(3)  

mscVrBrPteFilterPoints 1.3.6.1.4.1.562.36.2.1.100.5.2.10.1.4
This attribute in indicative of the points where filtering is active currently.
OBJECT-TYPE    
  INTEGER in(1), out(2), inOut(3), none(4)  

mscVrBrPtePortPointsTo 1.3.6.1.4.1.562.36.2.1.100.5.2.10.1.5
This attribute in indicative of the fact if this bridge port leads to the root bridge of the spanning tree topology or if leads to the designated bridge of the lan segment the bridge port is attached to.
OBJECT-TYPE    
  INTEGER none(1), rootBridge(2), designatedBridge(3)  

mscVrBrPteSpOperTable 1.3.6.1.4.1.562.36.2.1.100.5.2.11
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains all the attributes associated with the source route portion of the port table.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrBrPteSpOperEntry

mscVrBrPteSpOperEntry 1.3.6.1.4.1.562.36.2.1.100.5.2.11.1
An entry in the mscVrBrPteSpOperTable.
OBJECT-TYPE    
  MscVrBrPteSpOperEntry  

mscVrBrPteLanId 1.3.6.1.4.1.562.36.2.1.100.5.2.11.1.1
This attribute identifies the lan identifier the bridge port is attached to. LAN ID is a part of the route descriptor used when source route bridging. Note that the value 0 is used by some applications for special test cases and the value 65535 signifies that no lanId is assigned to this port.
OBJECT-TYPE    
  Unsigned32 0..4095 | 65535  

mscVrBrPteInternalLanId 1.3.6.1.4.1.562.36.2.1.100.5.2.11.1.2
This attribute contains the internal or logical LAN to which a port is attached. All source bridge ports have an associated physical LAN segment and logical internal LAN segment. Note that the value 0 is used by some applications for special test cases and the value 65535 signifies that no internalLanId is assigned to this port.
OBJECT-TYPE    
  Unsigned32 0..4095 | 65535  

mscVrBrPteBridgeNum 1.3.6.1.4.1.562.36.2.1.100.5.2.11.1.3
This attribute specifies the number assigned to the bridge associated with this LAN ID table entry. The bridge number is a part of the route descriptor of a source routed frame. Note that the value 0 is used by some applications for special test cases and the value 65535 signifies that no bridgeNum is assigned to this port.
OBJECT-TYPE    
  Unsigned32 0..15 | 65535  

mscVrBrNs 1.3.6.1.4.1.562.36.2.1.100.5.3
OBJECT IDENTIFIER    

mscVrBrNsRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.5.3.1
This entry controls the addition and deletion of mscVrBrNs components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrBrNsRowStatusEntry

mscVrBrNsRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.5.3.1.1
A single entry in the table represents a single mscVrBrNs component.
OBJECT-TYPE    
  MscVrBrNsRowStatusEntry  

mscVrBrNsRowStatus 1.3.6.1.4.1.562.36.2.1.100.5.3.1.1.1
This variable is used as the basis for SNMP naming of mscVrBrNs components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscVrBrNsComponentName 1.3.6.1.4.1.562.36.2.1.100.5.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscVrBrNsStorageType 1.3.6.1.4.1.562.36.2.1.100.5.3.1.1.4
This variable represents the storage type value for the mscVrBrNs tables.
OBJECT-TYPE    
  StorageType  

mscVrBrNsIndex 1.3.6.1.4.1.562.36.2.1.100.5.3.1.1.10
This variable represents the index for the mscVrBrNs tables.
OBJECT-TYPE    
  NonReplicated  

mscVrBrNsAte 1.3.6.1.4.1.562.36.2.1.100.5.3.2
OBJECT IDENTIFIER    

mscVrBrNsAteRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.5.3.2.1
This entry controls the addition and deletion of mscVrBrNsAte components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrBrNsAteRowStatusEntry

mscVrBrNsAteRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.5.3.2.1.1
A single entry in the table represents a single mscVrBrNsAte component.
OBJECT-TYPE    
  MscVrBrNsAteRowStatusEntry  

mscVrBrNsAteRowStatus 1.3.6.1.4.1.562.36.2.1.100.5.3.2.1.1.1
This variable is used as the basis for SNMP naming of mscVrBrNsAte components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscVrBrNsAteComponentName 1.3.6.1.4.1.562.36.2.1.100.5.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscVrBrNsAteStorageType 1.3.6.1.4.1.562.36.2.1.100.5.3.2.1.1.4
This variable represents the storage type value for the mscVrBrNsAte tables.
OBJECT-TYPE    
  StorageType  

mscVrBrNsAteEntryNumberIndex 1.3.6.1.4.1.562.36.2.1.100.5.3.2.1.1.10
This variable represents the index for the mscVrBrNsAte tables.
OBJECT-TYPE    
  Integer32 0..255  

mscVrBrNsAteProvTable 1.3.6.1.4.1.562.36.2.1.100.5.3.2.10
This group houses all the attributes that together form an apply table entry. These fields of an apply table entry are used as match criteria, which when satisfied results in the application of the named filter to the frame.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrBrNsAteProvEntry

mscVrBrNsAteProvEntry 1.3.6.1.4.1.562.36.2.1.100.5.3.2.10.1
An entry in the mscVrBrNsAteProvTable.
OBJECT-TYPE    
  MscVrBrNsAteProvEntry  

mscVrBrNsAteDomainNum 1.3.6.1.4.1.562.36.2.1.100.5.3.2.10.1.1
This attribute specifies the domain number associated with a frame, that would qualify it partly, for a match in the apply table. The domain number provisioned will form a part of the match criteria only if it is not provisioned with a wild card value of 0. If the wild card character is specified, any domain number will satisfy the match criteria, in effect loosing domain number as a qualifier in the match criteria.
OBJECT-TYPE    
  Unsigned32 0..4294967293  

mscVrBrNsAteFirstMacAddress 1.3.6.1.4.1.562.36.2.1.100.5.3.2.10.1.2
This attribute specifies the MAC address to be anded with the firstMACAddressMask, and the result compared with- a) The source MAC address in a frame when the attribute direction has a value of to, b) The destination MAC address in a frame when the attribute direction has a value of from, c) Source / Destination address in a frame when the attribute direction has a value of toFrom, as a part of finding a match in the bridge filter apply table.
OBJECT-TYPE    
  MacAddress SIZE(6)  

mscVrBrNsAteFirstMacAddressMask 1.3.6.1.4.1.562.36.2.1.100.5.3.2.10.1.3
This attribute specifies the mask which is anded with the attribute firstMACAddress. The result is then compared with- a) The source MAC address in a frame when the attribute direction has a value of to, b) The destination MAC address in a frame when the attribute direction has a value of from, c) Source / Destination address in a frame when the attribute direction has a value of toFrom, as a part of finding a match in the bridge filter apply table.
OBJECT-TYPE    
  MacAddress SIZE(6)  

mscVrBrNsAteSecondMacAddress 1.3.6.1.4.1.562.36.2.1.100.5.3.2.10.1.4
This attribute specifies the MAC address to be anded with the secondMACAddressMask, and the result compared with- a) The destination MAC address in a frame when the attribute direction has a value of to, b) The source MAC address in a frame when the attribute direction has a value of from, c) Destination/Source address in a frame when the attribute direction has a value of toFrom, as a part of finding a match in the bridge filter apply table.
OBJECT-TYPE    
  MacAddress SIZE(6)  

mscVrBrNsAteSecondMacAddressMask 1.3.6.1.4.1.562.36.2.1.100.5.3.2.10.1.5
This attribute specifies the mask which is anded with the attribute secondMACAddress. The result is then compared with- a) The destination MAC address in a frame when the attribute direction has a value of to, b) The source MAC address in a frame when the attribute direction has a value of from, c) Destination/Source address in a frame when the attribute direction has a value of toFrom, as a part of finding a match in the bridge filter apply table.
OBJECT-TYPE    
  MacAddress SIZE(6)  

mscVrBrNsAteDirection 1.3.6.1.4.1.562.36.2.1.100.5.3.2.10.1.6
This attribute specifies the direction of frame flow. It is used to appropriately compare the result of logically anding MAC address, MACAddressMask pairs, with the source /destination MAC address fields in a frame, as a part of the match finding process. When this attribute has value of to, the firstMACAddress is logically anded with the firstMACAddressMask and the result compared with the source MAC address in a frame and the secondMACAddress logically anded with the secondMACAddressMask and compared with the destination MAC address. When this attribute has a value of from, the firstMACAddress is logically anded with the firstMACAddressMask and the result compared with the destinationMAC address in a frame and the secondMACAddress logically anded with the secondMACAddressMask and compared with the sourceMAC addressin the frame, as a part of finding a match in the bridge filter apply table entry.
OBJECT-TYPE    
  INTEGER to(0), from(1), toFrom(2)  

mscVrBrNsAteFilterName 1.3.6.1.4.1.562.36.2.1.100.5.3.2.10.1.7
This attribute specifies the name of the filter to be applied to the frame, if it satisfies the match criteria mentioned in the bridge filter apply table entry.
OBJECT-TYPE    
  AsciiString SIZE(0..32)  

mscVrBrNsProvTable 1.3.6.1.4.1.562.36.2.1.100.5.3.10
This group houses all the provisionable attributes applicable to the packet control facility. These attributes are global attributes and are not port specific.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrBrNsProvEntry

mscVrBrNsProvEntry 1.3.6.1.4.1.562.36.2.1.100.5.3.10.1
An entry in the mscVrBrNsProvTable.
OBJECT-TYPE    
  MscVrBrNsProvEntry  

mscVrBrNsFirstFilter 1.3.6.1.4.1.562.36.2.1.100.5.3.10.1.1
This attribute specifies the name of the filter to be applied at the first filter point.
OBJECT-TYPE    
  AsciiString SIZE(0..32)  

mscVrBrNsLastFilter 1.3.6.1.4.1.562.36.2.1.100.5.3.10.1.2
This attribute specifies the name of the filter that is to be applied at the last filter point.
OBJECT-TYPE    
  AsciiString SIZE(0..32)  

mscVrBrTb 1.3.6.1.4.1.562.36.2.1.100.5.4
OBJECT IDENTIFIER    

mscVrBrTbRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.5.4.1
This entry controls the addition and deletion of mscVrBrTb components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrBrTbRowStatusEntry

mscVrBrTbRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.5.4.1.1
A single entry in the table represents a single mscVrBrTb component.
OBJECT-TYPE    
  MscVrBrTbRowStatusEntry  

mscVrBrTbRowStatus 1.3.6.1.4.1.562.36.2.1.100.5.4.1.1.1
This variable is used as the basis for SNMP naming of mscVrBrTb components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscVrBrTbComponentName 1.3.6.1.4.1.562.36.2.1.100.5.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscVrBrTbStorageType 1.3.6.1.4.1.562.36.2.1.100.5.4.1.1.4
This variable represents the storage type value for the mscVrBrTb tables.
OBJECT-TYPE    
  StorageType  

mscVrBrTbIndex 1.3.6.1.4.1.562.36.2.1.100.5.4.1.1.10
This variable represents the index for the mscVrBrTb tables.
OBJECT-TYPE    
  NonReplicated  

mscVrBrTbStp 1.3.6.1.4.1.562.36.2.1.100.5.4.2
OBJECT IDENTIFIER    

mscVrBrTbStpRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.5.4.2.1
This entry controls the addition and deletion of mscVrBrTbStp components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrBrTbStpRowStatusEntry

mscVrBrTbStpRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.5.4.2.1.1
A single entry in the table represents a single mscVrBrTbStp component.
OBJECT-TYPE    
  MscVrBrTbStpRowStatusEntry  

mscVrBrTbStpRowStatus 1.3.6.1.4.1.562.36.2.1.100.5.4.2.1.1.1
This variable is used as the basis for SNMP naming of mscVrBrTbStp components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscVrBrTbStpComponentName 1.3.6.1.4.1.562.36.2.1.100.5.4.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscVrBrTbStpStorageType 1.3.6.1.4.1.562.36.2.1.100.5.4.2.1.1.4
This variable represents the storage type value for the mscVrBrTbStp tables.
OBJECT-TYPE    
  StorageType  

mscVrBrTbStpIndex 1.3.6.1.4.1.562.36.2.1.100.5.4.2.1.1.10
This variable represents the index for the mscVrBrTbStp tables.
OBJECT-TYPE    
  Integer32 1..268435455  

mscVrBrTbStpProvTable 1.3.6.1.4.1.562.36.2.1.100.5.4.2.10
This group houses all the provisionable attributes that are applicable to the spanning tree protocol. These are global attributes and not port specific attributes. These attributes have a direct impact on the way this bridge participates in the spanning tree protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrBrTbStpProvEntry

mscVrBrTbStpProvEntry 1.3.6.1.4.1.562.36.2.1.100.5.4.2.10.1
An entry in the mscVrBrTbStpProvTable.
OBJECT-TYPE    
  MscVrBrTbStpProvEntry  

mscVrBrTbStpStpMode 1.3.6.1.4.1.562.36.2.1.100.5.4.2.10.1.1
This attribute determines if this stp instance is to act as the stp instance for the backbone or an stp instance for a non-backbone media configuration. There can exist only one Backbone stp instance per virtual router. If the attribute domainStpTbState is set to a value on and Backbone bridge ports have been provisioned, there should exist a Backbone stp instance. Please note that it is not permissible to assign the instance identifier of this stp instance as domain number of any access bridge port. In case of stp instances that are non-Backbone, the instance identifier is indicative of the domain number the stp is operational in.
OBJECT-TYPE    
  INTEGER access(1), backbone(2)  

mscVrBrTbStpProtocolSpec 1.3.6.1.4.1.562.36.2.1.100.5.4.2.10.1.2
This attribute specifies the type of spanning tree protocols that are in operation in the bridge. This means that this bridge participates in the types spanning tree protocol indicated by this attribute.
OBJECT-TYPE    
  INTEGER both(1), dec(2), ieee8021d(3)  

mscVrBrTbStpPriority 1.3.6.1.4.1.562.36.2.1.100.5.4.2.10.1.3
This attribute is used to construct the bridgeId. It forms the first two octets of the bridgeId and the remaining 6 octets are made up of the bridgeMACAddress. The priority also determines the root bridge of the spanning tree topology. Manipulating this attribute might lead to a change in the spanning tree topology.
OBJECT-TYPE    
  Unsigned32 0..65535  

mscVrBrTbStpBridgeMaxAge 1.3.6.1.4.1.562.36.2.1.100.5.4.2.10.1.4
The maximum age of spanning tree protocol information learned from the network on any bridge port before it is discarded. This value is used by this bridge and all the other bridges, when this bridge is the root bridge of the spanning tree topology. The following relationships are enforced as required by the IEEE 802.1d standards document. 2 *(bridgeForwardDelay -1.0seconds) >= bridgeMaxAge, bridgeMaxAge >= 2 * bridgeHelloTime + 1.0 seconds. DESCRIPTION
OBJECT-TYPE    
  Unsigned32 600..4000  

mscVrBrTbStpBridgeHelloTime 1.3.6.1.4.1.562.36.2.1.100.5.4.2.10.1.5
This attribute specifies the time interval between the transmission of configuration BPDUs on any bridge port when this bridge becomes the root bridge. This attribute value is also used by all the other bridges in the Spanning Tree while this bridge is the root. The following relationship is enforced as required by the IEEE 802.1d standards document. bridgeMaxAge >= 2 * bridgeHelloTime + 1.0 seconds.
OBJECT-TYPE    
  Unsigned32 100..1000  

mscVrBrTbStpBridgeForwardDelay 1.3.6.1.4.1.562.36.2.1.100.5.4.2.10.1.6
This attribute specifies how fast a bridge port changes its STP state while progressing towards the forwarding state. It is also used as agingTime to age dynamic entries in the forwarding table once a topology change is detected. This attribute is used by all the bridges participating in the spanning tree protocol, when this bridge is the root bridge. The following relationship is enforced as required by the IEEE 802.1d standards document. 2 *(bridgeForwardDelay -1.0sconds) >= bridgeMaxAge.
OBJECT-TYPE    
  Unsigned32 400..3000  

mscVrBrTbStpOperTable 1.3.6.1.4.1.562.36.2.1.100.5.4.2.11
This group houses all the operational, spanning tree protocol attributes. These attributes are applicable in a global manner and are not specific to a bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrBrTbStpOperEntry

mscVrBrTbStpOperEntry 1.3.6.1.4.1.562.36.2.1.100.5.4.2.11.1
An entry in the mscVrBrTbStpOperTable.
OBJECT-TYPE    
  MscVrBrTbStpOperEntry  

mscVrBrTbStpBridgeId 1.3.6.1.4.1.562.36.2.1.100.5.4.2.11.1.1
This attribute specifies the identifier value of this bridge, which serves to uniquely represent this bridge in the spanning tree topology. Thus, a bridgeId is unique only in the spanning tree instance the bridge in participating in. If multiple domain spanning trees exist then the same bridgeId can be re-used across these spanning tree instances.
OBJECT-TYPE    
  BridgeId SIZE(8)  

mscVrBrTbStpRootPortName 1.3.6.1.4.1.562.36.2.1.100.5.4.2.11.1.2
This attribute specifies the name of the bridge port that offers the lowest cost route to the root bridge of the spanning tree topology.The attribute rootPortName is a string of the form 'BridgePortName-i', where BridgePortName is the abbreviation of the corresponding bridge port and i is the instance identifier of the ProtocolPort, the bridge port is provisioned under. For example a TransparentBridgePort provisioned under ProtocolPort/myport would have a name TBP-myport. If multiple instances of spanning tree are operational, then there will exist a rootPortName value for each instance of the spanning tree running, and is applicable to that instance alone.
OBJECT-TYPE    
  AsciiString SIZE(4..29)  

mscVrBrTbStpTimeSinceTopologyChange 1.3.6.1.4.1.562.36.2.1.100.5.4.2.11.1.3
This attribute specifies the time since a spanning tree topology change was detected by this bridge.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrBrTbStpTopologyChangeDetect 1.3.6.1.4.1.562.36.2.1.100.5.4.2.11.1.4
This attribute specifies whether or not a topology change was detected. This flag is set when a bpdu with the topology detect flag set is received from the root bridge. If this bridge is the root bridge this flag is set on receipt of a topology change notification bpdu. It is reset after a fixed length of time.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

mscVrBrTbStpTopologyChanges 1.3.6.1.4.1.562.36.2.1.100.5.4.2.11.1.5
This attribute is indicative of the number of topology changes detected by this bridge since the last bridge reset. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrBrTbStpDesignatedRoot 1.3.6.1.4.1.562.36.2.1.100.5.4.2.11.1.6
This attribute specifies the identifier of the bridge that this bridge treats as the root of the spanning tree topology. The root of the spanning tree topology is chosen through exchange.
OBJECT-TYPE    
  BridgeId SIZE(8)  

mscVrBrTbStpRootCost 1.3.6.1.4.1.562.36.2.1.100.5.4.2.11.1.8
This attribute specifies the cost of the path to the root as seen by this bridge.
OBJECT-TYPE    
  Unsigned32 1..65535  

mscVrBrTbStpMaxAge 1.3.6.1.4.1.562.36.2.1.100.5.4.2.11.1.9
This attribute specifies the maximum age of the spanning tree protocol info learnt from a port, before it is discarded.
OBJECT-TYPE    
  Unsigned32 600..4000  

mscVrBrTbStpAgingTimeOper 1.3.6.1.4.1.562.36.2.1.100.5.4.2.11.1.10
This attribute specifies the time period used in seconds, to age out dynamically learned entries in the forwarding table. The aging time is specific to a spanning tree protocol instance running. A value for the aging time of the current instance of the spanning tree protocol can be provisioned through the attribute agingTime under the InwBrTb component. The agingTimeOper attribute assumes the value of the bridgeForwardDelay while a topology change is in progress. This is done to facilitate quick aging out of the learned entries that might have become obsolete due to a spanning tree topology change.
OBJECT-TYPE    
  Unsigned32 10..1000000  

mscVrBrTbStpHelloTime 1.3.6.1.4.1.562.36.2.1.100.5.4.2.11.1.11
This attribute specifies the time interval between the transmission of the configuration BPDUs. This value is obtained from the root bridge of the spanning tree topology, through bridge protocol data units. This value should be the value assigned to the attribute bridgeHelloTime of the root bridge.
OBJECT-TYPE    
  Unsigned32 100..1000  

mscVrBrTbStpHoldTime 1.3.6.1.4.1.562.36.2.1.100.5.4.2.11.1.12
This attribute specifies the interval of time which no more than two BPDUs should be sent.
OBJECT-TYPE    
  Unsigned32 100  

mscVrBrTbStpFwdDelay 1.3.6.1.4.1.562.36.2.1.100.5.4.2.11.1.13
This attribute specifies how much time a port spends in any state while progressing towards the forwarding state. It is also used to age out learned entries while a topology change is in progress.This value should be the value assigned to the attribute bridgefwdDelay of the root bridge.
OBJECT-TYPE    
  Unsigned32 400..3000  

mscVrBrTbSte 1.3.6.1.4.1.562.36.2.1.100.5.4.3
OBJECT IDENTIFIER    

mscVrBrTbSteRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.5.4.3.1
This entry controls the addition and deletion of mscVrBrTbSte components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrBrTbSteRowStatusEntry

mscVrBrTbSteRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.5.4.3.1.1
A single entry in the table represents a single mscVrBrTbSte component.
OBJECT-TYPE    
  MscVrBrTbSteRowStatusEntry  

mscVrBrTbSteRowStatus 1.3.6.1.4.1.562.36.2.1.100.5.4.3.1.1.1
This variable is used as the basis for SNMP naming of mscVrBrTbSte components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscVrBrTbSteComponentName 1.3.6.1.4.1.562.36.2.1.100.5.4.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscVrBrTbSteStorageType 1.3.6.1.4.1.562.36.2.1.100.5.4.3.1.1.4
This variable represents the storage type value for the mscVrBrTbSte tables.
OBJECT-TYPE    
  StorageType  

mscVrBrTbSteAddressIndex 1.3.6.1.4.1.562.36.2.1.100.5.4.3.1.1.10
This variable represents an index for the mscVrBrTbSte tables.
OBJECT-TYPE    
  DashedHexString SIZE(6)  

mscVrBrTbSteReceivePortIndex 1.3.6.1.4.1.562.36.2.1.100.5.4.3.1.1.11
This variable represents an index for the mscVrBrTbSte tables.
OBJECT-TYPE    
  AsciiStringIndex SIZE(1..29)  

mscVrBrTbSteProvTable 1.3.6.1.4.1.562.36.2.1.100.5.4.3.10
This group houses all the fields of a static table entry. All these attributes can be provisioned by the user. Multiple such static table entries together form the static forwarding table.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrBrTbSteProvEntry

mscVrBrTbSteProvEntry 1.3.6.1.4.1.562.36.2.1.100.5.4.3.10.1
An entry in the mscVrBrTbSteProvTable.
OBJECT-TYPE    
  MscVrBrTbSteProvEntry  

mscVrBrTbSteStatus 1.3.6.1.4.1.562.36.2.1.100.5.4.3.10.1.1
This attribute specifies the longevity of an entry in the static table. Please note that currently only a value of permanent is supported.
OBJECT-TYPE    
  INTEGER permanent(3)  

mscVrBrTbSteAtgtTable 1.3.6.1.4.1.562.36.2.1.100.5.4.3.271
This port map specifies the out bridge ports a MAC frame with address in its destination MAC address field, originating from receivePort, can go out of. The allowedToGoTo attribute is a set of strings where in each string is of the form 'BridgePortName-i', where BridgePortName is the abbreviation of the corresponding TB or SRT bridge port and i is the instance identifier of the ProtocolPort, the bridge port is provisioned under. Multiple strings can be specified on the same set command. Each string in the list is space separated. An '*' in place of the i indicates that regardless of the protocol port instance, all bridge ports with name BridgePortName should be included in the allowedToGoTo. In cases where there are multiple bridge ports provisioned under a protocol port, (e.g. pseudo bridge ports) each bridge port name must be specified in the form of strings, as indicated above. Please note that this attribute allowedToGoTo cannot contain any of the following bridge ports in part: SrBP, Srtb, Srsg, Tbsg, Srse, Srcl, FddiESr.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrBrTbSteAtgtEntry

mscVrBrTbSteAtgtEntry 1.3.6.1.4.1.562.36.2.1.100.5.4.3.271.1
An entry in the mscVrBrTbSteAtgtTable.
OBJECT-TYPE    
  MscVrBrTbSteAtgtEntry  

mscVrBrTbSteAtgtValue 1.3.6.1.4.1.562.36.2.1.100.5.4.3.271.1.1
This variable represents both the value and the index for the mscVrBrTbSteAtgtTable.
OBJECT-TYPE    
  AsciiString SIZE(4..29)  

mscVrBrTbSteAtgtRowStatus 1.3.6.1.4.1.562.36.2.1.100.5.4.3.271.1.2
This variable is used to control the addition and deletion of individual values of the mscVrBrTbSteAtgtTable.
OBJECT-TYPE    
  RowStatus  

mscVrBrTbFte 1.3.6.1.4.1.562.36.2.1.100.5.4.4
OBJECT IDENTIFIER    

mscVrBrTbFteRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.5.4.4.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrBrTbFte components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrBrTbFteRowStatusEntry

mscVrBrTbFteRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.5.4.4.1.1
A single entry in the table represents a single mscVrBrTbFte component.
OBJECT-TYPE    
  MscVrBrTbFteRowStatusEntry  

mscVrBrTbFteRowStatus 1.3.6.1.4.1.562.36.2.1.100.5.4.4.1.1.1
This variable is used as the basis for SNMP naming of mscVrBrTbFte components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscVrBrTbFteComponentName 1.3.6.1.4.1.562.36.2.1.100.5.4.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscVrBrTbFteStorageType 1.3.6.1.4.1.562.36.2.1.100.5.4.4.1.1.4
This variable represents the storage type value for the mscVrBrTbFte tables.
OBJECT-TYPE    
  StorageType  

mscVrBrTbFteAddressIndex 1.3.6.1.4.1.562.36.2.1.100.5.4.4.1.1.10
This variable represents an index for the mscVrBrTbFte tables.
OBJECT-TYPE    
  DashedHexString SIZE(6)  

mscVrBrTbFteDomainNumIndex 1.3.6.1.4.1.562.36.2.1.100.5.4.4.1.1.11
This variable represents an index for the mscVrBrTbFte tables.
OBJECT-TYPE    
  Integer32 1..268435455  

mscVrBrTbFteOperTable 1.3.6.1.4.1.562.36.2.1.100.5.4.4.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group houses all the attributes that form the fields of a forwarding table entry. Multiple such forwarding table entries put together form the forwarding table. These attributes reflect the state of the transparent bridge forwarding table.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrBrTbFteOperEntry

mscVrBrTbFteOperEntry 1.3.6.1.4.1.562.36.2.1.100.5.4.4.10.1
An entry in the mscVrBrTbFteOperTable.
OBJECT-TYPE    
  MscVrBrTbFteOperEntry  

mscVrBrTbFtePort 1.3.6.1.4.1.562.36.2.1.100.5.4.4.10.1.3
This attribute is the port name through which the address was learnt. This implies that the frames that are destined for a station whose MAC address is the same as the address, will be forwarded through the bridge port indicated by the attribute port. The attribute port is a string of the form 'BridgePortName-i', where BridgePortName is the abbreviation of the corresponding bridge port and i is the instance identifier of the ProtocolPort, the bridge port is provisioned under. For example a TransparentBridgePort provisioned under ProtocolPort/myport would have a name TBP-myport.
OBJECT-TYPE    
  AsciiString SIZE(4..29)  

mscVrBrTbFteAgeOfEntry 1.3.6.1.4.1.562.36.2.1.100.5.4.4.10.1.4
This attribute specifies the age of the forwarding table entry. This is used to purge entries that have not been used for a certain period of time. This feature is to ensure that only the recently used entries are kept in the forwarding table. The time period for aging entries can be provisioned through the attribute agingTime under the component TransparentBridge.
OBJECT-TYPE    
  Gauge32 0..1000000  

mscVrBrTbFtePeerAddressInfo 1.3.6.1.4.1.562.36.2.1.100.5.4.4.10.1.5
This attribute represents the learned peer address information. This address is used to essentially tunnel frames to a peer bridge unit across a network or a backbone. The tunneled frame is then appropriately processed by the peer bridge unit. Fddi encapsulated bridging using FddiETb bridge port and Source route encapsulated bridging using SrseBridgePort & TbseBridgePort are examples of instances where this attribute peerAddressInfo is used.
OBJECT-TYPE    
  BridgeId SIZE(8)  

mscVrBrTbFteStatus 1.3.6.1.4.1.562.36.2.1.100.5.4.4.10.1.6
This attribute represents the status of the forwarding table entry. A value of learned indicates that the entry was learned and cached from the network. Please note that a only a value of learned is currently supported.
OBJECT-TYPE    
  INTEGER learned(3)  

mscVrBrTbNcFte 1.3.6.1.4.1.562.36.2.1.100.5.4.5
OBJECT IDENTIFIER    

mscVrBrTbNcFteRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.5.4.5.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrBrTbNcFte components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrBrTbNcFteRowStatusEntry

mscVrBrTbNcFteRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.5.4.5.1.1
A single entry in the table represents a single mscVrBrTbNcFte component.
OBJECT-TYPE    
  MscVrBrTbNcFteRowStatusEntry  

mscVrBrTbNcFteRowStatus 1.3.6.1.4.1.562.36.2.1.100.5.4.5.1.1.1
This variable is used as the basis for SNMP naming of mscVrBrTbNcFte components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscVrBrTbNcFteComponentName 1.3.6.1.4.1.562.36.2.1.100.5.4.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscVrBrTbNcFteStorageType 1.3.6.1.4.1.562.36.2.1.100.5.4.5.1.1.4
This variable represents the storage type value for the mscVrBrTbNcFte tables.
OBJECT-TYPE    
  StorageType  

mscVrBrTbNcFteAddressIndex 1.3.6.1.4.1.562.36.2.1.100.5.4.5.1.1.10
This variable represents an index for the mscVrBrTbNcFte tables.
OBJECT-TYPE    
  DashedHexString SIZE(6)  

mscVrBrTbNcFteDomainNumIndex 1.3.6.1.4.1.562.36.2.1.100.5.4.5.1.1.11
This variable represents an index for the mscVrBrTbNcFte tables.
OBJECT-TYPE    
  Integer32 1..268435455  

mscVrBrTbNcFteOperTable 1.3.6.1.4.1.562.36.2.1.100.5.4.5.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group houses all the attributes that form the fields of a forwarding table entry. Multiple such forwarding table entries put together form the forwarding table. These attributes reflect the state of the transparent bridge forwarding table.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrBrTbNcFteOperEntry

mscVrBrTbNcFteOperEntry 1.3.6.1.4.1.562.36.2.1.100.5.4.5.10.1
An entry in the mscVrBrTbNcFteOperTable.
OBJECT-TYPE    
  MscVrBrTbNcFteOperEntry  

mscVrBrTbNcFtePort 1.3.6.1.4.1.562.36.2.1.100.5.4.5.10.1.3
This attribute is the port name through which the address was learnt. This implies that the frames that are destined for a station whose MAC address is the same as the address, will be forwarded through the bridge port indicated by the attribute port. The attribute port is a string of the form 'BridgePortName-i', where BridgePortName is the abbreviation of the corresponding bridge port and i is the instance identifier of the ProtocolPort, the bridge port is provisioned under. For example a TransparentBridgePort provisioned under ProtocolPort/myport would have a name TBP-myport.
OBJECT-TYPE    
  AsciiString SIZE(4..29)  

mscVrBrTbNcFteAgeOfEntry 1.3.6.1.4.1.562.36.2.1.100.5.4.5.10.1.4
This attribute specifies the age of the forwarding table entry. This is used to purge entries that have not been used for a certain period of time. This feature is to ensure that only the recently used entries are kept in the forwarding table. The time period for aging entries can be provisioned through the attribute agingTime under the component TransparentBridge.
OBJECT-TYPE    
  Gauge32 0..1000000  

mscVrBrTbNcFtePeerAddressInfo 1.3.6.1.4.1.562.36.2.1.100.5.4.5.10.1.5
This attribute represents the learned peer address information. This address is used to essentially tunnel frames to a peer bridge unit across a network or a backbone. The tunneled frame is then appropriately processed by the peer bridge unit. Fddi encapsulated bridging using FddiETb bridge port and Source route encapsulated bridging using SrseBridgePort & TbseBridgePort are examples of instances where this attribute peerAddressInfo is used.
OBJECT-TYPE    
  BridgeId SIZE(8)  

mscVrBrTbNcFteStatus 1.3.6.1.4.1.562.36.2.1.100.5.4.5.10.1.6
This attribute represents the status of the forwarding table entry. A value of learned indicates that the entry was learned and cached from the network. Please note that a only a value of learned is currently supported.
OBJECT-TYPE    
  INTEGER learned(3)  

mscVrBrTbProvTable 1.3.6.1.4.1.562.36.2.1.100.5.4.10
This group houses all the provisionable attributes applicable to a transparent bridge, those attributes that are global and are not port specific.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrBrTbProvEntry

mscVrBrTbProvEntry 1.3.6.1.4.1.562.36.2.1.100.5.4.10.1
An entry in the mscVrBrTbProvTable.
OBJECT-TYPE    
  MscVrBrTbProvEntry  

mscVrBrTbFwdTableNumEntries 1.3.6.1.4.1.562.36.2.1.100.5.4.10.1.1
This attribute specifies the number of entries that can exist in the transparent bridge forwarding table. This attribute provides a way to control the resources allocated to forwarding table. This attribute will prove to be very useful while attempting to fine tune the resource allocated to the various types of tables to suit the network configuration. Please understand that this attribute tbFwdTableNumEntries is influenced by the memory management scheme provided by the VirtualRouter and is by no means independent of the same. It is important to understand the network configuration in terms of number and types of bridge ports provisioned before attempting to fine tune this attribute.The following attributes can be used as feedback to fine tune this attribute: a) attribute totalForwardingTableEntries under the TransparentBridge component, b) attribute numFtEntriesFree under the TransparentBridge component, c) attribute numFtEntriesDenied under the TransparentBridge component
OBJECT-TYPE    
  Unsigned32 0..65535  

mscVrBrTbAgingTime 1.3.6.1.4.1.562.36.2.1.100.5.4.10.1.2
This attribute specifies the time period used in seconds, to age out dynamically learned entries in the forwarding table. The aging time can change, triggered by a spanning tree topology change. The operational value of the aging time is reflected in the attribute agingTimeOper under the SpanningTreeProtocol component.
OBJECT-TYPE    
  Unsigned32 10..1000000  

mscVrBrTbStatsTable 1.3.6.1.4.1.562.36.2.1.100.5.4.11
This group houses all the statistical attributes for a transparent bridge, those attributes that are global in nature and are not port specific.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrBrTbStatsEntry

mscVrBrTbStatsEntry 1.3.6.1.4.1.562.36.2.1.100.5.4.11.1
An entry in the mscVrBrTbStatsTable.
OBJECT-TYPE    
  MscVrBrTbStatsEntry  

mscVrBrTbLearnedEntryDiscards 1.3.6.1.4.1.562.36.2.1.100.5.4.11.1.1
This attribute represents the number of entries that might have been learned but have been discarded due to lack of space to store them in the forwarding table. This counter is not supported currently by the bridging platform and will always return a value of 0 in response to any queries.
OBJECT-TYPE    
  Counter32  

mscVrBrTbTotalForwardingTableEntries 1.3.6.1.4.1.562.36.2.1.100.5.4.11.1.2
This attribute specifies the total number of TB forwarding table entries. This includes static forwarding table entries and dynamic forwarding table entries. This attribute is influenced by the attribute tbFwdTableNumEntries, which is a provisionable attribute. If the value is consistently approaching the value of the attribute tbFwdTableNumEntries, it is advisable to increase the value provisioned for tbFwdTableNumEntries. It indicates a potential shortage of forwarding table entries in the future. This attribute is inversely proportional in value to the attribute numFtEntriesFree. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrBrTbNumFtEntriesFree 1.3.6.1.4.1.562.36.2.1.100.5.4.11.1.3
This attribute is indicative of the number of TB forwarding table entries free. These entries could be used by static entries or by dynamic entries. This counter wraps around its maximum value of 4294967295. A consistently high value for this attribute indicates that there is a resource surplus here, in terms of the memory requirements of the forwarding table. This surplus could be utilized elsewhere if need be. The value of this attributes directly influenced by the value of the attribute tbFwdTableNumEntries.
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscVrBrTbNumFtEntriesDenied 1.3.6.1.4.1.562.36.2.1.100.5.4.11.1.4
This attribute is indicative of the number of instances wherein TB table entry was unavailable. These entries could have been denied for static entries or for dynamic entries. This counter wraps around its maximum value of 4294967295. If this counter consistently shows a high value, it is indicative of a resource shortage in terms of memory required to support the increase in the number of forwarding table entries. To rectify this resource shortage, increase the number of forwarding table entries through the provisioned attribute tbFwdTableEntries under the Bridge component. This counter should ideally be as low as possible.
OBJECT-TYPE    
  Counter32  

mscVrBrSrb 1.3.6.1.4.1.562.36.2.1.100.5.5
OBJECT IDENTIFIER    

mscVrBrSrbRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.5.5.1
This entry controls the addition and deletion of mscVrBrSrb components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrBrSrbRowStatusEntry

mscVrBrSrbRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.5.5.1.1
A single entry in the table represents a single mscVrBrSrb component.
OBJECT-TYPE    
  MscVrBrSrbRowStatusEntry  

mscVrBrSrbRowStatus 1.3.6.1.4.1.562.36.2.1.100.5.5.1.1.1
This variable is used as the basis for SNMP naming of mscVrBrSrb components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscVrBrSrbComponentName 1.3.6.1.4.1.562.36.2.1.100.5.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscVrBrSrbStorageType 1.3.6.1.4.1.562.36.2.1.100.5.5.1.1.4
This variable represents the storage type value for the mscVrBrSrb tables.
OBJECT-TYPE    
  StorageType  

mscVrBrSrbIndex 1.3.6.1.4.1.562.36.2.1.100.5.5.1.1.10
This variable represents the index for the mscVrBrSrb tables.
OBJECT-TYPE    
  NonReplicated  

mscVrBrSrbStp 1.3.6.1.4.1.562.36.2.1.100.5.5.2
OBJECT IDENTIFIER    

mscVrBrSrbStpRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.5.5.2.1
This entry controls the addition and deletion of mscVrBrSrbStp components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrBrSrbStpRowStatusEntry

mscVrBrSrbStpRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.5.5.2.1.1
A single entry in the table represents a single mscVrBrSrbStp component.
OBJECT-TYPE    
  MscVrBrSrbStpRowStatusEntry  

mscVrBrSrbStpRowStatus 1.3.6.1.4.1.562.36.2.1.100.5.5.2.1.1.1
This variable is used as the basis for SNMP naming of mscVrBrSrbStp components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscVrBrSrbStpComponentName 1.3.6.1.4.1.562.36.2.1.100.5.5.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscVrBrSrbStpStorageType 1.3.6.1.4.1.562.36.2.1.100.5.5.2.1.1.4
This variable represents the storage type value for the mscVrBrSrbStp tables.
OBJECT-TYPE    
  StorageType  

mscVrBrSrbStpIndex 1.3.6.1.4.1.562.36.2.1.100.5.5.2.1.1.10
This variable represents the index for the mscVrBrSrbStp tables.
OBJECT-TYPE    
  Integer32 1..268435455  

mscVrBrSrbStpProvTable 1.3.6.1.4.1.562.36.2.1.100.5.5.2.10
This group houses all the provisionable attributes that are applicable to the spanning tree protocol. These are global attributes and not port specific attributes. These attributes have a direct impact on the way this bridge participates in the spanning tree protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrBrSrbStpProvEntry

mscVrBrSrbStpProvEntry 1.3.6.1.4.1.562.36.2.1.100.5.5.2.10.1
An entry in the mscVrBrSrbStpProvTable.
OBJECT-TYPE    
  MscVrBrSrbStpProvEntry  

mscVrBrSrbStpStpMode 1.3.6.1.4.1.562.36.2.1.100.5.5.2.10.1.1
This attribute determines if this stp instance is to act as the stp instance for the backbone or an stp instance for a non-backbone media configuration. There can exist only one Backbone stp instance per virtual router. If the attribute domainStpTbState is set to a value on and Backbone bridge ports have been provisioned, there should exist a Backbone stp instance. Please note that it is not permissible to assign the instance identifier of this stp instance as domain number of any access bridge port. In case of stp instances that are non-Backbone, the instance identifier is indicative of the domain number the stp is operational in.
OBJECT-TYPE    
  INTEGER access(1), backbone(2)  

mscVrBrSrbStpProtocolSpec 1.3.6.1.4.1.562.36.2.1.100.5.5.2.10.1.2
This attribute specifies the type of spanning tree protocols that are in operation in the bridge. This means that this bridge participates in the types spanning tree protocol indicated by this attribute.
OBJECT-TYPE    
  INTEGER both(1), dec(2), ieee8021d(3)  

mscVrBrSrbStpPriority 1.3.6.1.4.1.562.36.2.1.100.5.5.2.10.1.3
This attribute is used to construct the bridgeId. It forms the first two octets of the bridgeId and the remaining 6 octets are made up of the bridgeMACAddress. The priority also determines the root bridge of the spanning tree topology. Manipulating this attribute might lead to a change in the spanning tree topology.
OBJECT-TYPE    
  Unsigned32 0..65535  

mscVrBrSrbStpBridgeMaxAge 1.3.6.1.4.1.562.36.2.1.100.5.5.2.10.1.4
The maximum age of spanning tree protocol information learned from the network on any bridge port before it is discarded. This value is used by this bridge and all the other bridges, when this bridge is the root bridge of the spanning tree topology. The following relationships are enforced as required by the IEEE 802.1d standards document. 2 *(bridgeForwardDelay -1.0seconds) >= bridgeMaxAge, bridgeMaxAge >= 2 * bridgeHelloTime + 1.0 seconds. DESCRIPTION
OBJECT-TYPE    
  Unsigned32 600..4000  

mscVrBrSrbStpBridgeHelloTime 1.3.6.1.4.1.562.36.2.1.100.5.5.2.10.1.5
This attribute specifies the time interval between the transmission of configuration BPDUs on any bridge port when this bridge becomes the root bridge. This attribute value is also used by all the other bridges in the Spanning Tree while this bridge is the root. The following relationship is enforced as required by the IEEE 802.1d standards document. bridgeMaxAge >= 2 * bridgeHelloTime + 1.0 seconds.
OBJECT-TYPE    
  Unsigned32 100..1000  

mscVrBrSrbStpBridgeForwardDelay 1.3.6.1.4.1.562.36.2.1.100.5.5.2.10.1.6
This attribute specifies how fast a bridge port changes its STP state while progressing towards the forwarding state. It is also used as agingTime to age dynamic entries in the forwarding table once a topology change is detected. This attribute is used by all the bridges participating in the spanning tree protocol, when this bridge is the root bridge. The following relationship is enforced as required by the IEEE 802.1d standards document. 2 *(bridgeForwardDelay -1.0sconds) >= bridgeMaxAge.
OBJECT-TYPE    
  Unsigned32 400..3000  

mscVrBrSrbStpOperTable 1.3.6.1.4.1.562.36.2.1.100.5.5.2.11
This group houses all the operational, spanning tree protocol attributes. These attributes are applicable in a global manner and are not specific to a bridge port.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrBrSrbStpOperEntry

mscVrBrSrbStpOperEntry 1.3.6.1.4.1.562.36.2.1.100.5.5.2.11.1
An entry in the mscVrBrSrbStpOperTable.
OBJECT-TYPE    
  MscVrBrSrbStpOperEntry  

mscVrBrSrbStpBridgeId 1.3.6.1.4.1.562.36.2.1.100.5.5.2.11.1.1
This attribute specifies the identifier value of this bridge, which serves to uniquely represent this bridge in the spanning tree topology. Thus, a bridgeId is unique only in the spanning tree instance the bridge in participating in. If multiple domain spanning trees exist then the same bridgeId can be re-used across these spanning tree instances.
OBJECT-TYPE    
  BridgeId SIZE(8)  

mscVrBrSrbStpRootPortName 1.3.6.1.4.1.562.36.2.1.100.5.5.2.11.1.2
This attribute specifies the name of the bridge port that offers the lowest cost route to the root bridge of the spanning tree topology.The attribute rootPortName is a string of the form 'BridgePortName-i', where BridgePortName is the abbreviation of the corresponding bridge port and i is the instance identifier of the ProtocolPort, the bridge port is provisioned under. For example a TransparentBridgePort provisioned under ProtocolPort/myport would have a name TBP-myport. If multiple instances of spanning tree are operational, then there will exist a rootPortName value for each instance of the spanning tree running, and is applicable to that instance alone.
OBJECT-TYPE    
  AsciiString SIZE(4..29)  

mscVrBrSrbStpTimeSinceTopologyChange 1.3.6.1.4.1.562.36.2.1.100.5.5.2.11.1.3
This attribute specifies the time since a spanning tree topology change was detected by this bridge.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrBrSrbStpTopologyChangeDetect 1.3.6.1.4.1.562.36.2.1.100.5.5.2.11.1.4
This attribute specifies whether or not a topology change was detected. This flag is set when a bpdu with the topology detect flag set is received from the root bridge. If this bridge is the root bridge this flag is set on receipt of a topology change notification bpdu. It is reset after a fixed length of time.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

mscVrBrSrbStpTopologyChanges 1.3.6.1.4.1.562.36.2.1.100.5.5.2.11.1.5
This attribute is indicative of the number of topology changes detected by this bridge since the last bridge reset. This counter wraps around its maximum value of 4294967295.
OBJECT-TYPE    
  Counter32  

mscVrBrSrbStpDesignatedRoot 1.3.6.1.4.1.562.36.2.1.100.5.5.2.11.1.6
This attribute specifies the identifier of the bridge that this bridge treats as the root of the spanning tree topology. The root of the spanning tree topology is chosen through exchange.
OBJECT-TYPE    
  BridgeId SIZE(8)  

mscVrBrSrbStpRootCost 1.3.6.1.4.1.562.36.2.1.100.5.5.2.11.1.8
This attribute specifies the cost of the path to the root as seen by this bridge.
OBJECT-TYPE    
  Unsigned32 1..65535  

mscVrBrSrbStpMaxAge 1.3.6.1.4.1.562.36.2.1.100.5.5.2.11.1.9
This attribute specifies the maximum age of the spanning tree protocol info learnt from a port, before it is discarded.
OBJECT-TYPE    
  Unsigned32 600..4000  

mscVrBrSrbStpAgingTimeOper 1.3.6.1.4.1.562.36.2.1.100.5.5.2.11.1.10
This attribute specifies the time period used in seconds, to age out dynamically learned entries in the forwarding table. The aging time is specific to a spanning tree protocol instance running. A value for the aging time of the current instance of the spanning tree protocol can be provisioned through the attribute agingTime under the InwBrTb component. The agingTimeOper attribute assumes the value of the bridgeForwardDelay while a topology change is in progress. This is done to facilitate quick aging out of the learned entries that might have become obsolete due to a spanning tree topology change.
OBJECT-TYPE    
  Unsigned32 10..1000000  

mscVrBrSrbStpHelloTime 1.3.6.1.4.1.562.36.2.1.100.5.5.2.11.1.11
This attribute specifies the time interval between the transmission of the configuration BPDUs. This value is obtained from the root bridge of the spanning tree topology, through bridge protocol data units. This value should be the value assigned to the attribute bridgeHelloTime of the root bridge.
OBJECT-TYPE    
  Unsigned32 100..1000  

mscVrBrSrbStpHoldTime 1.3.6.1.4.1.562.36.2.1.100.5.5.2.11.1.12
This attribute specifies the interval of time which no more than two BPDUs should be sent.
OBJECT-TYPE    
  Unsigned32 100  

mscVrBrSrbStpFwdDelay 1.3.6.1.4.1.562.36.2.1.100.5.5.2.11.1.13
This attribute specifies how much time a port spends in any state while progressing towards the forwarding state. It is also used to age out learned entries while a topology change is in progress.This value should be the value assigned to the attribute bridgefwdDelay of the root bridge.
OBJECT-TYPE    
  Unsigned32 400..3000  

mscVrBrSrbLte 1.3.6.1.4.1.562.36.2.1.100.5.5.3
OBJECT IDENTIFIER    

mscVrBrSrbLteRowStatusTable 1.3.6.1.4.1.562.36.2.1.100.5.5.3.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrBrSrbLte components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrBrSrbLteRowStatusEntry

mscVrBrSrbLteRowStatusEntry 1.3.6.1.4.1.562.36.2.1.100.5.5.3.1.1
A single entry in the table represents a single mscVrBrSrbLte component.
OBJECT-TYPE    
  MscVrBrSrbLteRowStatusEntry  

mscVrBrSrbLteRowStatus 1.3.6.1.4.1.562.36.2.1.100.5.5.3.1.1.1
This variable is used as the basis for SNMP naming of mscVrBrSrbLte components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscVrBrSrbLteComponentName 1.3.6.1.4.1.562.36.2.1.100.5.5.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscVrBrSrbLteStorageType 1.3.6.1.4.1.562.36.2.1.100.5.5.3.1.1.4
This variable represents the storage type value for the mscVrBrSrbLte tables.
OBJECT-TYPE    
  StorageType  

mscVrBrSrbLteLanIdIndex 1.3.6.1.4.1.562.36.2.1.100.5.5.3.1.1.10
This variable represents an index for the mscVrBrSrbLte tables.
OBJECT-TYPE    
  Integer32 0..4095 | 65535  

mscVrBrSrbLteDomainNumIndex 1.3.6.1.4.1.562.36.2.1.100.5.5.3.1.1.11
This variable represents an index for the mscVrBrSrbLte tables.
OBJECT-TYPE    
  Integer32 1..268435455  

mscVrBrSrbLteOperTable 1.3.6.1.4.1.562.36.2.1.100.5.5.3.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains all the fields of a LAN ID Table entry.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrBrSrbLteOperEntry

mscVrBrSrbLteOperEntry 1.3.6.1.4.1.562.36.2.1.100.5.5.3.10.1
An entry in the mscVrBrSrbLteOperTable.
OBJECT-TYPE    
  MscVrBrSrbLteOperEntry  

mscVrBrSrbLtePortName 1.3.6.1.4.1.562.36.2.1.100.5.5.3.10.1.1
This attribute specifies the name of the bridge port the frame should be forwarded through to reach the desired Lan. In the case where the desired Lan is across a TB/SRT cloud, this entry would have the name of the SrSeBridgePort. The attribute portName is a string of the form 'BridgePortName-i', where BridgePortName is the abbreviation of the corresponding bridge port and i is the instance identifier of the ProtocolPort the bridge port is provisioned under. For example a SourceRouteBridgePort provisioned under ProtocolPort/MyPort would have a name SrBP-MyPort. Please note that the attribute portName cannot have a value of TBP, FddiETb, Tbse, Tbcl, Tbsr, Srsg, Tbsg. DESCRIPTION
OBJECT-TYPE    
  AsciiString SIZE(4..29)  

mscVrBrSrbLteAgeOfEntry 1.3.6.1.4.1.562.36.2.1.100.5.5.3.10.1.2
This attribute specifies the age of this entry in seconds.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscVrBrSrbLtePeerMACAddress 1.3.6.1.4.1.562.36.2.1.100.5.5.3.10.1.3
This attribute specifies the MAC address of a bridge unit found across an transparent bridge/source route transparent network whose LAN ID is referenced by the attribute lanId. The peerMACAddress for static entries will be all zeroes.
OBJECT-TYPE    
  DashedHexString SIZE(6)  

mscVrBrSrbLteTypeOfEntry 1.3.6.1.4.1.562.36.2.1.100.5.5.3.10.1.4
This attribute specifies the type of the LAN ID table entry. LAN ID table entries may be either static or dynamic. Dynamic entries imply that to reach the desired LAN source route frames need to be tunneled through a TB/SRT network, to another bridge unit which is attached to the LAN. These entries have a peerMACAddress associated with them and may be removed through the aging mechanism of the LAN ID table. Static entries on the other hand contain information about LANs that may be reached directly through bridge ports attached to the bridge. They are not aged and do not have a peerMACAddress associated with them.
OBJECT-TYPE    
  INTEGER static(0), dynamic(1)  

mscVrBrSrbProvTable 1.3.6.1.4.1.562.36.2.1.100.5.5.10
This group contains all provisionable attributes associated with source route bridging. These attributes are global in nature as opposed to port specific.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrBrSrbProvEntry

mscVrBrSrbProvEntry 1.3.6.1.4.1.562.36.2.1.100.5.5.10.1
An entry in the mscVrBrSrbProvTable.
OBJECT-TYPE    
  MscVrBrSrbProvEntry  

mscVrBrSrbLanIdTableNumEntries 1.3.6.1.4.1.562.36.2.1.100.5.5.10.1.1
This attribute specifies the maximum number of entries in the LAN ID table. This attribute provides a way to control the resources allocated to the LAN ID table. The lanIdTableNumEntries value depends upon the VirtualRouter attribute bridgingMaxHeapSpace and the number of source route bridge ports provisioned for this SourceRouteBridge. Consider the following attributes of the SourceRouteBridge component when adjusting this number: - totalLanIdTableEntries - numLanIdTEntriesFree - numLanIdTEntriesDenied
OBJECT-TYPE    
  Unsigned32 500..65535  

mscVrBrSrbAgingTime 1.3.6.1.4.1.562.36.2.1.100.5.5.10.1.2
This attribute specifies the time period used in seconds, to age out dynamically learned entries in the forwarding table. The aging time can change, triggered by a spanning tree topology change. The operational value of the aging time is reflected in the attribute agingTimeOper under the SpanningTreeProtocol component.
OBJECT-TYPE    
  Unsigned32 10..1000000  

mscVrBrSrbBridgeLfMode 1.3.6.1.4.1.562.36.2.1.100.5.5.10.1.3
This attribute indicates whether the bridge operates using the older 3-bit length negotiation field or the newer 6-bit length field in the routing information field. Only the 3-bit field is supported at this time.
OBJECT-TYPE    
  INTEGER mode3(1), mode6(2)  

mscVrBrSrbStatsTable 1.3.6.1.4.1.562.36.2.1.100.5.5.11
This group contains all statistical attributes associated with the SourceRouteBridge. These attributes are global in nature as opposed to port specific.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrBrSrbStatsEntry

mscVrBrSrbStatsEntry 1.3.6.1.4.1.562.36.2.1.100.5.5.11.1
An entry in the mscVrBrSrbStatsTable.
OBJECT-TYPE    
  MscVrBrSrbStatsEntry  

mscVrBrSrbTotalLanIdTableEntries 1.3.6.1.4.1.562.36.2.1.100.5.5.11.1.1
This attribute specifies the total number of LAN ID Table entries. The total includes both static and dynamic entries. The value is limited by the attribute lanIdTableNumEntries, a provisionable attribute. If the value is consistently approaching the value of lanIdTableNumEntries it is advisable to increase the value provisioned for lanIdTableNumEntries.
OBJECT-TYPE    
  Counter32  

mscVrBrSrbNumLanIdtEntriesFree 1.3.6.1.4.1.562.36.2.1.100.5.5.11.1.2
This attribute specifies the number of LanIdTable entries that are available for use. A consistently high value indicates a resource surplus in terms of memory requirements for the bridge. This surplus could be utilized elsewhere if need be. The value of this attribute is directly influenced by the value of the lanIdTableNumEntries.
OBJECT-TYPE    
  Counter32  

mscVrBrSrbNumLanIdtEntriesDenied 1.3.6.1.4.1.562.36.2.1.100.5.5.11.1.3
This attribute indicates the number of instances where an entry was not placed in the LanIdTable due to the lack of free entries. A rapid increase indicates a shortage of free entries. To reduce the shortage increase the provisioned lanIdTableNumEntries value.
OBJECT-TYPE    
  Counter32  

mscVrBrAdminControlTable 1.3.6.1.4.1.562.36.2.1.100.5.10
This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrBrAdminControlEntry

mscVrBrAdminControlEntry 1.3.6.1.4.1.562.36.2.1.100.5.10.1
An entry in the mscVrBrAdminControlTable.
OBJECT-TYPE    
  MscVrBrAdminControlEntry  

mscVrBrAdminStatus 1.3.6.1.4.1.562.36.2.1.100.5.10.1.1
This attribute defines the current administrative status for thiscomponent. enabled indicates that the component is available for operation. disabled indicates the component is unavailable for operation. The application preserves all previously received provisioning data, all writable operational data and all counters. Please note that all learnt data are lost. The bridge application is not available for operation while in this state.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

mscVrBrStateTable 1.3.6.1.4.1.562.36.2.1.100.5.12
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrBrStateEntry

mscVrBrStateEntry 1.3.6.1.4.1.562.36.2.1.100.5.12.1
An entry in the mscVrBrStateTable.
OBJECT-TYPE    
  MscVrBrStateEntry  

mscVrBrAdminState 1.3.6.1.4.1.562.36.2.1.100.5.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscVrBrOperationalState 1.3.6.1.4.1.562.36.2.1.100.5.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscVrBrUsageState 1.3.6.1.4.1.562.36.2.1.100.5.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscVrBrOperStatusTable 1.3.6.1.4.1.562.36.2.1.100.5.13
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrBrOperStatusEntry

mscVrBrOperStatusEntry 1.3.6.1.4.1.562.36.2.1.100.5.13.1
An entry in the mscVrBrOperStatusTable.
OBJECT-TYPE    
  MscVrBrOperStatusEntry  

mscVrBrSnmpOperStatus 1.3.6.1.4.1.562.36.2.1.100.5.13.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscVrBrOperTable 1.3.6.1.4.1.562.36.2.1.100.5.14
This group houses all the operational attributes applicable to bridging, those components that are global in nature and are not port specific.
OBJECT-TYPE    
  SEQUENCE OF  
    MscVrBrOperEntry

mscVrBrOperEntry 1.3.6.1.4.1.562.36.2.1.100.5.14.1
An entry in the mscVrBrOperTable.
OBJECT-TYPE    
  MscVrBrOperEntry  

mscVrBrBridgeAddress 1.3.6.1.4.1.562.36.2.1.100.5.14.1.1
This attribute represents the Mac address for the bridge. This address is used when this bridge must be referred to in a unique manner. It is used to form the bridge identifier, used by the spanning tree protocol, by concatenating it with the attribute bridgePriority under the component SpanningTreeProtocol.
OBJECT-TYPE    
  MacAddress SIZE(6)  

mscVrBrNumPorts 1.3.6.1.4.1.562.36.2.1.100.5.14.1.2
This attribute is indicative of the number of ports this bridge controls. In other words, it is a count of the number of bridge ports provisioned.
OBJECT-TYPE    
  Gauge32 0..255  

mscVrBrType 1.3.6.1.4.1.562.36.2.1.100.5.14.1.3
This attribute is indicative of the capability of this bridge unit in terms of types of bridging it can handle.
OBJECT-TYPE    
  INTEGER unknown(1), transparentOnly(2), sourceRouteOnly(3), srt(4)  

mscCB 1.3.6.1.4.1.562.36.2.1.103
OBJECT IDENTIFIER    

mscCBRowStatusTable 1.3.6.1.4.1.562.36.2.1.103.1
This entry controls the addition and deletion of mscCB components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscCBRowStatusEntry

mscCBRowStatusEntry 1.3.6.1.4.1.562.36.2.1.103.1.1
A single entry in the table represents a single mscCB component.
OBJECT-TYPE    
  MscCBRowStatusEntry  

mscCBRowStatus 1.3.6.1.4.1.562.36.2.1.103.1.1.1
This variable is used as the basis for SNMP naming of mscCB components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscCBComponentName 1.3.6.1.4.1.562.36.2.1.103.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscCBStorageType 1.3.6.1.4.1.562.36.2.1.103.1.1.4
This variable represents the storage type value for the mscCB tables.
OBJECT-TYPE    
  StorageType  

mscCBIndex 1.3.6.1.4.1.562.36.2.1.103.1.1.10
This variable represents the index for the mscCB tables.
OBJECT-TYPE    
  NonReplicated  

mscCBAdminControlTable 1.3.6.1.4.1.562.36.2.1.103.10
This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscCBAdminControlEntry

mscCBAdminControlEntry 1.3.6.1.4.1.562.36.2.1.103.10.1
An entry in the mscCBAdminControlTable.
OBJECT-TYPE    
  MscCBAdminControlEntry  

mscCBSnmpAdminStatus 1.3.6.1.4.1.562.36.2.1.103.10.1.1
The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscCBIfEntryTable 1.3.6.1.4.1.562.36.2.1.103.11
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    MscCBIfEntryEntry

mscCBIfEntryEntry 1.3.6.1.4.1.562.36.2.1.103.11.1
An entry in the mscCBIfEntryTable.
OBJECT-TYPE    
  MscCBIfEntryEntry  

mscCBIfAdminStatus 1.3.6.1.4.1.562.36.2.1.103.11.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscCBIfIndex 1.3.6.1.4.1.562.36.2.1.103.11.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscCBMpTable 1.3.6.1.4.1.562.36.2.1.103.12
This group contains the base provisioning data for the media base component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscCBMpEntry

mscCBMpEntry 1.3.6.1.4.1.562.36.2.1.103.12.1
An entry in the mscCBMpTable.
OBJECT-TYPE    
  MscCBMpEntry  

mscCBLinkToProtocolPort 1.3.6.1.4.1.562.36.2.1.103.12.1.1
This attribute specifies the ProtocolPort to which this interface is linked to. The protocol port is the logical interface to the network. The protocol port component describes the logical characteristics of this interface.
OBJECT-TYPE    
  Link  

mscCBOperTable 1.3.6.1.4.1.562.36.2.1.103.13
This group includes the operational attibutes which are specific to the ClusterBridge component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscCBOperEntry

mscCBOperEntry 1.3.6.1.4.1.562.36.2.1.103.13.1
An entry in the mscCBOperTable.
OBJECT-TYPE    
  MscCBOperEntry  

mscCBMacAddress 1.3.6.1.4.1.562.36.2.1.103.13.1.1
The medium access controller (MAC) address is an address that is only recognized by one station on the attached bus. This address is automatically assigned by the system.
OBJECT-TYPE    
  MacAddress SIZE(6)  

mscCBStateTable 1.3.6.1.4.1.562.36.2.1.103.14
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscCBStateEntry

mscCBStateEntry 1.3.6.1.4.1.562.36.2.1.103.14.1
An entry in the mscCBStateTable.
OBJECT-TYPE    
  MscCBStateEntry  

mscCBAdminState 1.3.6.1.4.1.562.36.2.1.103.14.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscCBOperationalState 1.3.6.1.4.1.562.36.2.1.103.14.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscCBUsageState 1.3.6.1.4.1.562.36.2.1.103.14.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscCBOperStatusTable 1.3.6.1.4.1.562.36.2.1.103.15
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscCBOperStatusEntry

mscCBOperStatusEntry 1.3.6.1.4.1.562.36.2.1.103.15.1
An entry in the mscCBOperStatusTable.
OBJECT-TYPE    
  MscCBOperStatusEntry  

mscCBSnmpOperStatus 1.3.6.1.4.1.562.36.2.1.103.15.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscPB 1.3.6.1.4.1.562.36.2.1.104
OBJECT IDENTIFIER    

mscPBRowStatusTable 1.3.6.1.4.1.562.36.2.1.104.1
This entry controls the addition and deletion of mscPB components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscPBRowStatusEntry

mscPBRowStatusEntry 1.3.6.1.4.1.562.36.2.1.104.1.1
A single entry in the table represents a single mscPB component.
OBJECT-TYPE    
  MscPBRowStatusEntry  

mscPBRowStatus 1.3.6.1.4.1.562.36.2.1.104.1.1.1
This variable is used as the basis for SNMP naming of mscPB components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscPBComponentName 1.3.6.1.4.1.562.36.2.1.104.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscPBStorageType 1.3.6.1.4.1.562.36.2.1.104.1.1.4
This variable represents the storage type value for the mscPB tables.
OBJECT-TYPE    
  StorageType  

mscPBIndex 1.3.6.1.4.1.562.36.2.1.104.1.1.10
This variable represents the index for the mscPB tables.
OBJECT-TYPE    
  NonReplicated  

mscPBAdminControlTable 1.3.6.1.4.1.562.36.2.1.104.10
This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscPBAdminControlEntry

mscPBAdminControlEntry 1.3.6.1.4.1.562.36.2.1.104.10.1
An entry in the mscPBAdminControlTable.
OBJECT-TYPE    
  MscPBAdminControlEntry  

mscPBSnmpAdminStatus 1.3.6.1.4.1.562.36.2.1.104.10.1.1
The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscPBIfEntryTable 1.3.6.1.4.1.562.36.2.1.104.11
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    MscPBIfEntryEntry

mscPBIfEntryEntry 1.3.6.1.4.1.562.36.2.1.104.11.1
An entry in the mscPBIfEntryTable.
OBJECT-TYPE    
  MscPBIfEntryEntry  

mscPBIfAdminStatus 1.3.6.1.4.1.562.36.2.1.104.11.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscPBIfIndex 1.3.6.1.4.1.562.36.2.1.104.11.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscPBMpTable 1.3.6.1.4.1.562.36.2.1.104.12
This group contains the base provisioning data for the media base component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscPBMpEntry

mscPBMpEntry 1.3.6.1.4.1.562.36.2.1.104.12.1
An entry in the mscPBMpTable.
OBJECT-TYPE    
  MscPBMpEntry  

mscPBLinkToProtocolPort 1.3.6.1.4.1.562.36.2.1.104.12.1.1
This attribute specifies the ProtocolPort to which this interface is linked to. The protocol port is the logical interface to the network. The protocol port component describes the logical characteristics of this interface.
OBJECT-TYPE    
  Link  

mscPBOperTable 1.3.6.1.4.1.562.36.2.1.104.13
This group includes the operational attibutes which are specific to the PseudoBridge component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscPBOperEntry

mscPBOperEntry 1.3.6.1.4.1.562.36.2.1.104.13.1
An entry in the mscPBOperTable.
OBJECT-TYPE    
  MscPBOperEntry  

mscPBMacAddress 1.3.6.1.4.1.562.36.2.1.104.13.1.1
The medium access controller (MAC) address is an address that is only recognized by one station on the attached bus. This address is automatically assigned by the system.
OBJECT-TYPE    
  HexString SIZE(6)  

mscPBStateTable 1.3.6.1.4.1.562.36.2.1.104.14
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscPBStateEntry

mscPBStateEntry 1.3.6.1.4.1.562.36.2.1.104.14.1
An entry in the mscPBStateTable.
OBJECT-TYPE    
  MscPBStateEntry  

mscPBAdminState 1.3.6.1.4.1.562.36.2.1.104.14.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscPBOperationalState 1.3.6.1.4.1.562.36.2.1.104.14.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscPBUsageState 1.3.6.1.4.1.562.36.2.1.104.14.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscPBOperStatusTable 1.3.6.1.4.1.562.36.2.1.104.15
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscPBOperStatusEntry

mscPBOperStatusEntry 1.3.6.1.4.1.562.36.2.1.104.15.1
An entry in the mscPBOperStatusTable.
OBJECT-TYPE    
  MscPBOperStatusEntry  

mscPBSnmpOperStatus 1.3.6.1.4.1.562.36.2.1.104.15.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

bridgeMIB 1.3.6.1.4.1.562.36.2.2.25
OBJECT IDENTIFIER    

bridgeGroup 1.3.6.1.4.1.562.36.2.2.25.1
OBJECT IDENTIFIER    

bridgeGroupCA 1.3.6.1.4.1.562.36.2.2.25.1.1
OBJECT IDENTIFIER    

bridgeGroupCA02 1.3.6.1.4.1.562.36.2.2.25.1.1.3
OBJECT IDENTIFIER    

bridgeGroupCA02A 1.3.6.1.4.1.562.36.2.2.25.1.1.3.2
OBJECT IDENTIFIER    

bridgeCapabilities 1.3.6.1.4.1.562.36.2.2.25.3
OBJECT IDENTIFIER    

bridgeCapabilitiesCA 1.3.6.1.4.1.562.36.2.2.25.3.1
OBJECT IDENTIFIER    

bridgeCapabilitiesCA02 1.3.6.1.4.1.562.36.2.2.25.3.1.3
OBJECT IDENTIFIER    

bridgeCapabilitiesCA02A 1.3.6.1.4.1.562.36.2.2.25.3.1.3.2
OBJECT IDENTIFIER    

Defined Objects

MscVrPpTbclRowStatusEntry  
SEQUENCE    
  RowStatus as mscVrPpTbclRowStatus  
  DisplayString as mscVrPpTbclComponentName  
  StorageType as mscVrPpTbclStorageType  
  NonReplicated as mscVrPpTbclIndex  

MscVrPpTbclProvEntry  
SEQUENCE    
  INTEGER as mscVrPpTbclTranslateIpx  
  INTEGER as mscVrPpTbclFragmentIp  
  INTEGER as mscVrPpTbclServiceClass  
  INTEGER as mscVrPpTbclConvertArpMacAddress  
  Unsigned32 as mscVrPpTbclPortNum  

MscVrPpTbclTbProvEntry  
SEQUENCE    
  INTEGER as mscVrPpTbclSecureOption  

MscVrPpTbclStpProvEntry  
SEQUENCE    
  INTEGER as mscVrPpTbclAdminStatus  
  INTEGER as mscVrPpTbclPortStateStpControl  
  INTEGER as mscVrPpTbclStpTypeProv  
  Unsigned32 as mscVrPpTbclPortPriority  
  Unsigned32 as mscVrPpTbclPathCost  
  INTEGER as mscVrPpTbclPathCostMethod  

MscVrPpTbclDIProvEntry  
SEQUENCE    
  Unsigned32 as mscVrPpTbclDomainNum  
  INTEGER as mscVrPpTbclPreserveDomain  

MscVrPpTbclStateEntry  
SEQUENCE    
  INTEGER as mscVrPpTbclAdminState  
  INTEGER as mscVrPpTbclOperationalState  
  INTEGER as mscVrPpTbclUsageState  

MscVrPpTbclOperStatusEntry  
SEQUENCE    
  INTEGER as mscVrPpTbclSnmpOperStatus  

MscVrPpTbclOperEntry  
SEQUENCE    
  AsciiString as mscVrPpTbclPortName  
  Unsigned32 as mscVrPpTbclUpTime  
  Unsigned32 as mscVrPpTbclDownTime  
  INTEGER as mscVrPpTbclBridgingMode  
  INTEGER as mscVrPpTbclBridgePortConfig  
  INTEGER as mscVrPpTbclBridgePortType  
  InterfaceIndex as mscVrPpTbclIfIndex  
  Counter32 as mscVrPpTbclDelayExceededDiscards  
  Counter32 as mscVrPpTbclMtuExceededDiscards  

MscVrPpTbclTbOperEntry  
SEQUENCE    
  Unsigned32 as mscVrPpTbclMaxInfo  
  Counter32 as mscVrPpTbclBadVerifyDiscards  
  Counter32 as mscVrPpTbclUnicastNoMatches  
  Counter32 as mscVrPpTbclStaticEntryDiscards  
  Counter32 as mscVrPpTbclDynamicEntryDiscards  
  Counter32 as mscVrPpTbclLearningDiscards  
  Counter32 as mscVrPpTbclInDiscards  
  Counter32 as mscVrPpTbclInFrames  
  Counter32 as mscVrPpTbclOutFrames  

MscVrPpTbclStpOperEntry  
SEQUENCE    
  INTEGER as mscVrPpTbclStpPortState  
  INTEGER as mscVrPpTbclStpTypeOper  
  Unsigned32 as mscVrPpTbclDesignatedCost  
  Unsigned32 as mscVrPpTbclPathCostOper  
  BridgeId as mscVrPpTbclDesignatedBridge  
  Hex as mscVrPpTbclDesignatedPort  
  Counter32 as mscVrPpTbclForwardTransitions  
  Counter32 as mscVrPpTbclBlockingDiscards  
  BridgeId as mscVrPpTbclDesignatedRoot  

MscVrPpTbclStatsEntry  
SEQUENCE    
  Counter32 as mscVrPpTbclBadAbstractDiscards  
  Counter32 as mscVrPpTbclTinygramFramesIn  
  Counter32 as mscVrPpTbclTinygramFramesOut  
  Counter32 as mscVrPpTbclInFilterDiscards  
  Counter32 as mscVrPpTbclOutFilterDiscards  

MscVrPpTbclNsRowStatusEntry  
SEQUENCE    
  RowStatus as mscVrPpTbclNsRowStatus  
  DisplayString as mscVrPpTbclNsComponentName  
  StorageType as mscVrPpTbclNsStorageType  
  NonReplicated as mscVrPpTbclNsIndex  

MscVrPpTbclNsProvEntry  
SEQUENCE    
  AsciiString as mscVrPpTbclNsIncomingFilter  
  AsciiString as mscVrPpTbclNsOutgoingFilter  

MscVrPpFddiETBRowStatusEntry  
SEQUENCE    
  RowStatus as mscVrPpFddiETBRowStatus  
  DisplayString as mscVrPpFddiETBComponentName  
  StorageType as mscVrPpFddiETBStorageType  
  NonReplicated as mscVrPpFddiETBIndex  

MscVrPpFddiETBProvEntry  
SEQUENCE    
  INTEGER as mscVrPpFddiETBTranslateIpx  
  INTEGER as mscVrPpFddiETBFragmentIp  
  INTEGER as mscVrPpFddiETBServiceClass  
  INTEGER as mscVrPpFddiETBConvertArpMacAddress  
  Unsigned32 as mscVrPpFddiETBPortNum  

MscVrPpFddiETBTbProvEntry  
SEQUENCE    
  INTEGER as mscVrPpFddiETBSecureOption  

MscVrPpFddiETBStpProvEntry  
SEQUENCE    
  INTEGER as mscVrPpFddiETBAdminStatus  
  INTEGER as mscVrPpFddiETBPortStateStpControl  
  INTEGER as mscVrPpFddiETBStpTypeProv  
  Unsigned32 as mscVrPpFddiETBPortPriority  
  Unsigned32 as mscVrPpFddiETBPathCost  
  INTEGER as mscVrPpFddiETBPathCostMethod  

MscVrPpFddiETBDIProvEntry  
SEQUENCE    
  Unsigned32 as mscVrPpFddiETBDomainNum  
  INTEGER as mscVrPpFddiETBPreserveDomain  

MscVrPpFddiETBStateEntry  
SEQUENCE    
  INTEGER as mscVrPpFddiETBAdminState  
  INTEGER as mscVrPpFddiETBOperationalState  
  INTEGER as mscVrPpFddiETBUsageState  

MscVrPpFddiETBOperStatusEntry  
SEQUENCE    
  INTEGER as mscVrPpFddiETBSnmpOperStatus  

MscVrPpFddiETBOperEntry  
SEQUENCE    
  AsciiString as mscVrPpFddiETBPortName  
  Unsigned32 as mscVrPpFddiETBUpTime  
  Unsigned32 as mscVrPpFddiETBDownTime  
  INTEGER as mscVrPpFddiETBBridgingMode  
  INTEGER as mscVrPpFddiETBBridgePortConfig  
  INTEGER as mscVrPpFddiETBBridgePortType  
  InterfaceIndex as mscVrPpFddiETBIfIndex  
  Counter32 as mscVrPpFddiETBDelayExceededDiscards  
  Counter32 as mscVrPpFddiETBMtuExceededDiscards  

MscVrPpFddiETBTbOperEntry  
SEQUENCE    
  Unsigned32 as mscVrPpFddiETBMaxInfo  
  Counter32 as mscVrPpFddiETBBadVerifyDiscards  
  Counter32 as mscVrPpFddiETBUnicastNoMatches  
  Counter32 as mscVrPpFddiETBStaticEntryDiscards  
  Counter32 as mscVrPpFddiETBDynamicEntryDiscards  
  Counter32 as mscVrPpFddiETBLearningDiscards  
  Counter32 as mscVrPpFddiETBInDiscards  
  Counter32 as mscVrPpFddiETBInFrames  
  Counter32 as mscVrPpFddiETBOutFrames  

MscVrPpFddiETBStpOperEntry  
SEQUENCE    
  INTEGER as mscVrPpFddiETBStpPortState  
  INTEGER as mscVrPpFddiETBStpTypeOper  
  Unsigned32 as mscVrPpFddiETBDesignatedCost  
  Unsigned32 as mscVrPpFddiETBPathCostOper  
  BridgeId as mscVrPpFddiETBDesignatedBridge  
  Hex as mscVrPpFddiETBDesignatedPort  
  Counter32 as mscVrPpFddiETBForwardTransitions  
  Counter32 as mscVrPpFddiETBBlockingDiscards  
  BridgeId as mscVrPpFddiETBDesignatedRoot  

MscVrPpFddiETBStatsEntry  
SEQUENCE    
  Counter32 as mscVrPpFddiETBBadAbstractDiscards  
  Counter32 as mscVrPpFddiETBTinygramFramesIn  
  Counter32 as mscVrPpFddiETBTinygramFramesOut  
  Counter32 as mscVrPpFddiETBInFilterDiscards  
  Counter32 as mscVrPpFddiETBOutFilterDiscards  

MscVrPpFddiETBNsRowStatusEntry  
SEQUENCE    
  RowStatus as mscVrPpFddiETBNsRowStatus  
  DisplayString as mscVrPpFddiETBNsComponentName  
  StorageType as mscVrPpFddiETBNsStorageType  
  NonReplicated as mscVrPpFddiETBNsIndex  

MscVrPpFddiETBNsProvEntry  
SEQUENCE    
  AsciiString as mscVrPpFddiETBNsIncomingFilter  
  AsciiString as mscVrPpFddiETBNsOutgoingFilter  

MscVrPpTbpRowStatusEntry  
SEQUENCE    
  RowStatus as mscVrPpTbpRowStatus  
  DisplayString as mscVrPpTbpComponentName  
  StorageType as mscVrPpTbpStorageType  
  NonReplicated as mscVrPpTbpIndex  

MscVrPpTbpProvEntry  
SEQUENCE    
  INTEGER as mscVrPpTbpTranslateIpx  
  INTEGER as mscVrPpTbpFragmentIp  
  INTEGER as mscVrPpTbpServiceClass  
  INTEGER as mscVrPpTbpConvertArpMacAddress  
  Unsigned32 as mscVrPpTbpPortNum  

MscVrPpTbpTbProvEntry  
SEQUENCE    
  INTEGER as mscVrPpTbpSecureOption  

MscVrPpTbpStpProvEntry  
SEQUENCE    
  INTEGER as mscVrPpTbpAdminStatus  
  INTEGER as mscVrPpTbpPortStateStpControl  
  INTEGER as mscVrPpTbpStpTypeProv  
  Unsigned32 as mscVrPpTbpPortPriority  
  Unsigned32 as mscVrPpTbpPathCost  
  INTEGER as mscVrPpTbpPathCostMethod  

MscVrPpTbpDIProvEntry  
SEQUENCE    
  Unsigned32 as mscVrPpTbpDomainNum  
  INTEGER as mscVrPpTbpPreserveDomain  

MscVrPpTbpStateEntry  
SEQUENCE    
  INTEGER as mscVrPpTbpAdminState  
  INTEGER as mscVrPpTbpOperationalState  
  INTEGER as mscVrPpTbpUsageState  

MscVrPpTbpOperStatusEntry  
SEQUENCE    
  INTEGER as mscVrPpTbpSnmpOperStatus  

MscVrPpTbpOperEntry  
SEQUENCE    
  AsciiString as mscVrPpTbpPortName  
  Unsigned32 as mscVrPpTbpUpTime  
  Unsigned32 as mscVrPpTbpDownTime  
  INTEGER as mscVrPpTbpBridgingMode  
  INTEGER as mscVrPpTbpBridgePortConfig  
  INTEGER as mscVrPpTbpBridgePortType  
  InterfaceIndex as mscVrPpTbpIfIndex  
  Counter32 as mscVrPpTbpDelayExceededDiscards  
  Counter32 as mscVrPpTbpMtuExceededDiscards  

MscVrPpTbpTbOperEntry  
SEQUENCE    
  Unsigned32 as mscVrPpTbpMaxInfo  
  Counter32 as mscVrPpTbpBadVerifyDiscards  
  Counter32 as mscVrPpTbpUnicastNoMatches  
  Counter32 as mscVrPpTbpStaticEntryDiscards  
  Counter32 as mscVrPpTbpDynamicEntryDiscards  
  Counter32 as mscVrPpTbpLearningDiscards  
  Counter32 as mscVrPpTbpInDiscards  
  Counter32 as mscVrPpTbpInFrames  
  Counter32 as mscVrPpTbpOutFrames  

MscVrPpTbpStpOperEntry  
SEQUENCE    
  INTEGER as mscVrPpTbpStpPortState  
  INTEGER as mscVrPpTbpStpTypeOper  
  Unsigned32 as mscVrPpTbpDesignatedCost  
  Unsigned32 as mscVrPpTbpPathCostOper  
  BridgeId as mscVrPpTbpDesignatedBridge  
  Hex as mscVrPpTbpDesignatedPort  
  Counter32 as mscVrPpTbpForwardTransitions  
  Counter32 as mscVrPpTbpBlockingDiscards  
  BridgeId as mscVrPpTbpDesignatedRoot  

MscVrPpTbpStatsEntry  
SEQUENCE    
  Counter32 as mscVrPpTbpBadAbstractDiscards  
  Counter32 as mscVrPpTbpTinygramFramesIn  
  Counter32 as mscVrPpTbpTinygramFramesOut  
  Counter32 as mscVrPpTbpInFilterDiscards  
  Counter32 as mscVrPpTbpOutFilterDiscards  

MscVrPpTbpNsRowStatusEntry  
SEQUENCE    
  RowStatus as mscVrPpTbpNsRowStatus  
  DisplayString as mscVrPpTbpNsComponentName  
  StorageType as mscVrPpTbpNsStorageType  
  NonReplicated as mscVrPpTbpNsIndex  

MscVrPpTbpNsProvEntry  
SEQUENCE    
  AsciiString as mscVrPpTbpNsIncomingFilter  
  AsciiString as mscVrPpTbpNsOutgoingFilter  

MscVrPpSrBpRowStatusEntry  
SEQUENCE    
  RowStatus as mscVrPpSrBpRowStatus  
  DisplayString as mscVrPpSrBpComponentName  
  StorageType as mscVrPpSrBpStorageType  
  NonReplicated as mscVrPpSrBpIndex  

MscVrPpSrBpProvEntry  
SEQUENCE    
  INTEGER as mscVrPpSrBpTranslateIpx  
  INTEGER as mscVrPpSrBpFragmentIp  
  INTEGER as mscVrPpSrBpServiceClass  
  INTEGER as mscVrPpSrBpConvertArpMacAddress  
  Unsigned32 as mscVrPpSrBpPortNum  

MscVrPpSrBpStpProvEntry  
SEQUENCE    
  INTEGER as mscVrPpSrBpAdminStatus  
  INTEGER as mscVrPpSrBpPortStateStpControl  
  INTEGER as mscVrPpSrBpStpTypeProv  
  Unsigned32 as mscVrPpSrBpPortPriority  
  Unsigned32 as mscVrPpSrBpPathCost  
  INTEGER as mscVrPpSrBpPathCostMethod  

MscVrPpSrBpDIProvEntry  
SEQUENCE    
  Unsigned32 as mscVrPpSrBpDomainNum  
  INTEGER as mscVrPpSrBpPreserveDomain  

MscVrPpSrBpStateEntry  
SEQUENCE    
  INTEGER as mscVrPpSrBpAdminState  
  INTEGER as mscVrPpSrBpOperationalState  
  INTEGER as mscVrPpSrBpUsageState  

MscVrPpSrBpOperStatusEntry  
SEQUENCE    
  INTEGER as mscVrPpSrBpSnmpOperStatus  

MscVrPpSrBpOperEntry  
SEQUENCE    
  AsciiString as mscVrPpSrBpPortName  
  Unsigned32 as mscVrPpSrBpUpTime  
  Unsigned32 as mscVrPpSrBpDownTime  
  INTEGER as mscVrPpSrBpBridgingMode  
  INTEGER as mscVrPpSrBpBridgePortConfig  
  INTEGER as mscVrPpSrBpBridgePortType  
  InterfaceIndex as mscVrPpSrBpIfIndex  
  Counter32 as mscVrPpSrBpDelayExceededDiscards  
  Counter32 as mscVrPpSrBpMtuExceededDiscards  

MscVrPpSrBpStpOperEntry  
SEQUENCE    
  INTEGER as mscVrPpSrBpStpPortState  
  INTEGER as mscVrPpSrBpStpTypeOper  
  Unsigned32 as mscVrPpSrBpDesignatedCost  
  Unsigned32 as mscVrPpSrBpPathCostOper  
  BridgeId as mscVrPpSrBpDesignatedBridge  
  Hex as mscVrPpSrBpDesignatedPort  
  Counter32 as mscVrPpSrBpForwardTransitions  
  Counter32 as mscVrPpSrBpBlockingDiscards  
  BridgeId as mscVrPpSrBpDesignatedRoot  

MscVrPpSrBpStatsEntry  
SEQUENCE    
  Counter32 as mscVrPpSrBpBadAbstractDiscards  
  Counter32 as mscVrPpSrBpTinygramFramesIn  
  Counter32 as mscVrPpSrBpTinygramFramesOut  
  Counter32 as mscVrPpSrBpInFilterDiscards  
  Counter32 as mscVrPpSrBpOutFilterDiscards  

MscVrPpSrBpSrProvEntry  
SEQUENCE    
  Unsigned32 as mscVrPpSrBpHopCount  
  INTEGER as mscVrPpSrBpExploreFrameTreatment  
  Unsigned32 as mscVrPpSrBpLanId  
  Unsigned32 as mscVrPpSrBpInternalLanId  
  Unsigned32 as mscVrPpSrBpBridgeNum  
  Unsigned32 as mscVrPpSrBpLargestFrame  
  INTEGER as mscVrPpSrBpSteSpanMode  
  Unsigned32 as mscVrPpSrBpAreRdLimit  
  Unsigned32 as mscVrPpSrBpSteRdLimit  

MscVrPpSrBpSrStatsEntry  
SEQUENCE    
  Counter32 as mscVrPpSrBpSpecInFrames  
  Counter32 as mscVrPpSrBpSpecOutFrames  
  Counter32 as mscVrPpSrBpApeInFrames  
  Counter32 as mscVrPpSrBpApeOutFrames  
  Counter32 as mscVrPpSrBpSteInFrames  
  Counter32 as mscVrPpSrBpSteOutFrames  
  Counter32 as mscVrPpSrBpSegmentMismatchDiscards  
  Counter32 as mscVrPpSrBpDupSegmentDiscards  
  Counter32 as mscVrPpSrBpHopCountExceededDiscards  
  Counter32 as mscVrPpSrBpDupLanIdOrTreeErrors  
  Counter32 as mscVrPpSrBpLanIdMismatches  
  Counter32 as mscVrPpSrBpStaticDiscards  
  Counter32 as mscVrPpSrBpDynamicDiscards  

MscVrPpSrBpNsRowStatusEntry  
SEQUENCE    
  RowStatus as mscVrPpSrBpNsRowStatus  
  DisplayString as mscVrPpSrBpNsComponentName  
  StorageType as mscVrPpSrBpNsStorageType  
  NonReplicated as mscVrPpSrBpNsIndex  

MscVrPpSrBpNsProvEntry  
SEQUENCE    
  AsciiString as mscVrPpSrBpNsIncomingFilter  
  AsciiString as mscVrPpSrBpNsOutgoingFilter  

MscVrPpSrtBpRowStatusEntry  
SEQUENCE    
  RowStatus as mscVrPpSrtBpRowStatus  
  DisplayString as mscVrPpSrtBpComponentName  
  StorageType as mscVrPpSrtBpStorageType  
  NonReplicated as mscVrPpSrtBpIndex  

MscVrPpSrtBpProvEntry  
SEQUENCE    
  INTEGER as mscVrPpSrtBpTranslateIpx  
  INTEGER as mscVrPpSrtBpFragmentIp  
  INTEGER as mscVrPpSrtBpServiceClass  
  INTEGER as mscVrPpSrtBpConvertArpMacAddress  
  Unsigned32 as mscVrPpSrtBpPortNum  

MscVrPpSrtBpTbProvEntry  
SEQUENCE    
  INTEGER as mscVrPpSrtBpSecureOption  

MscVrPpSrtBpStpProvEntry  
SEQUENCE    
  INTEGER as mscVrPpSrtBpAdminStatus  
  INTEGER as mscVrPpSrtBpPortStateStpControl  
  INTEGER as mscVrPpSrtBpStpTypeProv  
  Unsigned32 as mscVrPpSrtBpPortPriority  
  Unsigned32 as mscVrPpSrtBpPathCost  
  INTEGER as mscVrPpSrtBpPathCostMethod  

MscVrPpSrtBpDIProvEntry  
SEQUENCE    
  Unsigned32 as mscVrPpSrtBpDomainNum  
  INTEGER as mscVrPpSrtBpPreserveDomain  

MscVrPpSrtBpStateEntry  
SEQUENCE    
  INTEGER as mscVrPpSrtBpAdminState  
  INTEGER as mscVrPpSrtBpOperationalState  
  INTEGER as mscVrPpSrtBpUsageState  

MscVrPpSrtBpOperStatusEntry  
SEQUENCE    
  INTEGER as mscVrPpSrtBpSnmpOperStatus  

MscVrPpSrtBpOperEntry  
SEQUENCE    
  AsciiString as mscVrPpSrtBpPortName  
  Unsigned32 as mscVrPpSrtBpUpTime  
  Unsigned32 as mscVrPpSrtBpDownTime  
  INTEGER as mscVrPpSrtBpBridgingMode  
  INTEGER as mscVrPpSrtBpBridgePortConfig  
  INTEGER as mscVrPpSrtBpBridgePortType  
  InterfaceIndex as mscVrPpSrtBpIfIndex  
  Counter32 as mscVrPpSrtBpDelayExceededDiscards  
  Counter32 as mscVrPpSrtBpMtuExceededDiscards  

MscVrPpSrtBpTbOperEntry  
SEQUENCE    
  Unsigned32 as mscVrPpSrtBpMaxInfo  
  Counter32 as mscVrPpSrtBpBadVerifyDiscards  
  Counter32 as mscVrPpSrtBpUnicastNoMatches  
  Counter32 as mscVrPpSrtBpStaticEntryDiscards  
  Counter32 as mscVrPpSrtBpDynamicEntryDiscards  
  Counter32 as mscVrPpSrtBpLearningDiscards  
  Counter32 as mscVrPpSrtBpInDiscards  
  Counter32 as mscVrPpSrtBpInFrames  
  Counter32 as mscVrPpSrtBpOutFrames  

MscVrPpSrtBpStpOperEntry  
SEQUENCE    
  INTEGER as mscVrPpSrtBpStpPortState  
  INTEGER as mscVrPpSrtBpStpTypeOper  
  Unsigned32 as mscVrPpSrtBpDesignatedCost  
  Unsigned32 as mscVrPpSrtBpPathCostOper  
  BridgeId as mscVrPpSrtBpDesignatedBridge  
  Hex as mscVrPpSrtBpDesignatedPort  
  Counter32 as mscVrPpSrtBpForwardTransitions  
  Counter32 as mscVrPpSrtBpBlockingDiscards  
  BridgeId as mscVrPpSrtBpDesignatedRoot  

MscVrPpSrtBpStatsEntry  
SEQUENCE    
  Counter32 as mscVrPpSrtBpBadAbstractDiscards  
  Counter32 as mscVrPpSrtBpTinygramFramesIn  
  Counter32 as mscVrPpSrtBpTinygramFramesOut  
  Counter32 as mscVrPpSrtBpInFilterDiscards  
  Counter32 as mscVrPpSrtBpOutFilterDiscards  

MscVrPpSrtBpSrProvEntry  
SEQUENCE    
  Unsigned32 as mscVrPpSrtBpHopCount  
  INTEGER as mscVrPpSrtBpExploreFrameTreatment  
  Unsigned32 as mscVrPpSrtBpLanId  
  Unsigned32 as mscVrPpSrtBpInternalLanId  
  Unsigned32 as mscVrPpSrtBpBridgeNum  
  Unsigned32 as mscVrPpSrtBpLargestFrame  
  INTEGER as mscVrPpSrtBpSteSpanMode  
  Unsigned32 as mscVrPpSrtBpAreRdLimit  
  Unsigned32 as mscVrPpSrtBpSteRdLimit  

MscVrPpSrtBpSrStatsEntry  
SEQUENCE    
  Counter32 as mscVrPpSrtBpSpecInFrames  
  Counter32 as mscVrPpSrtBpSpecOutFrames  
  Counter32 as mscVrPpSrtBpApeInFrames  
  Counter32 as mscVrPpSrtBpApeOutFrames  
  Counter32 as mscVrPpSrtBpSteInFrames  
  Counter32 as mscVrPpSrtBpSteOutFrames  
  Counter32 as mscVrPpSrtBpSegmentMismatchDiscards  
  Counter32 as mscVrPpSrtBpDupSegmentDiscards  
  Counter32 as mscVrPpSrtBpHopCountExceededDiscards  
  Counter32 as mscVrPpSrtBpDupLanIdOrTreeErrors  
  Counter32 as mscVrPpSrtBpLanIdMismatches  
  Counter32 as mscVrPpSrtBpStaticDiscards  
  Counter32 as mscVrPpSrtBpDynamicDiscards  

MscVrPpSrtBpNsRowStatusEntry  
SEQUENCE    
  RowStatus as mscVrPpSrtBpNsRowStatus  
  DisplayString as mscVrPpSrtBpNsComponentName  
  StorageType as mscVrPpSrtBpNsStorageType  
  NonReplicated as mscVrPpSrtBpNsIndex  

MscVrPpSrtBpNsProvEntry  
SEQUENCE    
  AsciiString as mscVrPpSrtBpNsIncomingFilter  
  AsciiString as mscVrPpSrtBpNsOutgoingFilter  

MscVrPpSrseRowStatusEntry  
SEQUENCE    
  RowStatus as mscVrPpSrseRowStatus  
  DisplayString as mscVrPpSrseComponentName  
  StorageType as mscVrPpSrseStorageType  
  NonReplicated as mscVrPpSrseIndex  

MscVrPpSrseProvEntry  
SEQUENCE    
  INTEGER as mscVrPpSrseTranslateIpx  
  INTEGER as mscVrPpSrseFragmentIp  
  INTEGER as mscVrPpSrseServiceClass  
  INTEGER as mscVrPpSrseConvertArpMacAddress  
  Unsigned32 as mscVrPpSrsePortNum  

MscVrPpSrseStpProvEntry  
SEQUENCE    
  INTEGER as mscVrPpSrseAdminStatus  
  INTEGER as mscVrPpSrsePortStateStpControl  
  INTEGER as mscVrPpSrseStpTypeProv  
  Unsigned32 as mscVrPpSrsePortPriority  
  Unsigned32 as mscVrPpSrsePathCost  
  INTEGER as mscVrPpSrsePathCostMethod  

MscVrPpSrseDIProvEntry  
SEQUENCE    
  Unsigned32 as mscVrPpSrseDomainNum  
  INTEGER as mscVrPpSrsePreserveDomain  

MscVrPpSrseStateEntry  
SEQUENCE    
  INTEGER as mscVrPpSrseAdminState  
  INTEGER as mscVrPpSrseOperationalState  
  INTEGER as mscVrPpSrseUsageState  

MscVrPpSrseOperStatusEntry  
SEQUENCE    
  INTEGER as mscVrPpSrseSnmpOperStatus  

MscVrPpSrseOperEntry  
SEQUENCE    
  AsciiString as mscVrPpSrsePortName  
  Unsigned32 as mscVrPpSrseUpTime  
  Unsigned32 as mscVrPpSrseDownTime  
  INTEGER as mscVrPpSrseBridgingMode  
  INTEGER as mscVrPpSrseBridgePortConfig  
  INTEGER as mscVrPpSrseBridgePortType  
  InterfaceIndex as mscVrPpSrseIfIndex  
  Counter32 as mscVrPpSrseDelayExceededDiscards  
  Counter32 as mscVrPpSrseMtuExceededDiscards  

MscVrPpSrseStpOperEntry  
SEQUENCE    
  INTEGER as mscVrPpSrseStpPortState  
  INTEGER as mscVrPpSrseStpTypeOper  
  Unsigned32 as mscVrPpSrseDesignatedCost  
  Unsigned32 as mscVrPpSrsePathCostOper  
  BridgeId as mscVrPpSrseDesignatedBridge  
  Hex as mscVrPpSrseDesignatedPort  
  Counter32 as mscVrPpSrseForwardTransitions  
  Counter32 as mscVrPpSrseBlockingDiscards  
  BridgeId as mscVrPpSrseDesignatedRoot  

MscVrPpSrseStatsEntry  
SEQUENCE    
  Counter32 as mscVrPpSrseBadAbstractDiscards  
  Counter32 as mscVrPpSrseTinygramFramesIn  
  Counter32 as mscVrPpSrseTinygramFramesOut  
  Counter32 as mscVrPpSrseInFilterDiscards  
  Counter32 as mscVrPpSrseOutFilterDiscards  

MscVrPpSrseSrProvEntry  
SEQUENCE    
  Unsigned32 as mscVrPpSrseHopCount  
  INTEGER as mscVrPpSrseExploreFrameTreatment  
  Unsigned32 as mscVrPpSrseLanId  
  Unsigned32 as mscVrPpSrseInternalLanId  
  Unsigned32 as mscVrPpSrseBridgeNum  
  Unsigned32 as mscVrPpSrseLargestFrame  
  INTEGER as mscVrPpSrseSteSpanMode  
  Unsigned32 as mscVrPpSrseAreRdLimit  
  Unsigned32 as mscVrPpSrseSteRdLimit  

MscVrPpSrseSrStatsEntry  
SEQUENCE    
  Counter32 as mscVrPpSrseSpecInFrames  
  Counter32 as mscVrPpSrseSpecOutFrames  
  Counter32 as mscVrPpSrseApeInFrames  
  Counter32 as mscVrPpSrseApeOutFrames  
  Counter32 as mscVrPpSrseSteInFrames  
  Counter32 as mscVrPpSrseSteOutFrames  
  Counter32 as mscVrPpSrseSegmentMismatchDiscards  
  Counter32 as mscVrPpSrseDupSegmentDiscards  
  Counter32 as mscVrPpSrseHopCountExceededDiscards  
  Counter32 as mscVrPpSrseDupLanIdOrTreeErrors  
  Counter32 as mscVrPpSrseLanIdMismatches  
  Counter32 as mscVrPpSrseStaticDiscards  
  Counter32 as mscVrPpSrseDynamicDiscards  

MscVrPpTbseRowStatusEntry  
SEQUENCE    
  RowStatus as mscVrPpTbseRowStatus  
  DisplayString as mscVrPpTbseComponentName  
  StorageType as mscVrPpTbseStorageType  
  NonReplicated as mscVrPpTbseIndex  

MscVrPpTbseProvEntry  
SEQUENCE    
  INTEGER as mscVrPpTbseTranslateIpx  
  INTEGER as mscVrPpTbseFragmentIp  
  INTEGER as mscVrPpTbseServiceClass  
  INTEGER as mscVrPpTbseConvertArpMacAddress  
  Unsigned32 as mscVrPpTbsePortNum  

MscVrPpTbseTbProvEntry  
SEQUENCE    
  INTEGER as mscVrPpTbseSecureOption  

MscVrPpTbseStpProvEntry  
SEQUENCE    
  INTEGER as mscVrPpTbseAdminStatus  
  INTEGER as mscVrPpTbsePortStateStpControl  
  INTEGER as mscVrPpTbseStpTypeProv  
  Unsigned32 as mscVrPpTbsePortPriority  
  Unsigned32 as mscVrPpTbsePathCost  
  INTEGER as mscVrPpTbsePathCostMethod  

MscVrPpTbseDIProvEntry  
SEQUENCE    
  Unsigned32 as mscVrPpTbseDomainNum  
  INTEGER as mscVrPpTbsePreserveDomain  

MscVrPpTbseStateEntry  
SEQUENCE    
  INTEGER as mscVrPpTbseAdminState  
  INTEGER as mscVrPpTbseOperationalState  
  INTEGER as mscVrPpTbseUsageState  

MscVrPpTbseOperStatusEntry  
SEQUENCE    
  INTEGER as mscVrPpTbseSnmpOperStatus  

MscVrPpTbseOperEntry  
SEQUENCE    
  AsciiString as mscVrPpTbsePortName  
  Unsigned32 as mscVrPpTbseUpTime  
  Unsigned32 as mscVrPpTbseDownTime  
  INTEGER as mscVrPpTbseBridgingMode  
  INTEGER as mscVrPpTbseBridgePortConfig  
  INTEGER as mscVrPpTbseBridgePortType  
  InterfaceIndex as mscVrPpTbseIfIndex  
  Counter32 as mscVrPpTbseDelayExceededDiscards  
  Counter32 as mscVrPpTbseMtuExceededDiscards  

MscVrPpTbseTbOperEntry  
SEQUENCE    
  Unsigned32 as mscVrPpTbseMaxInfo  
  Counter32 as mscVrPpTbseBadVerifyDiscards  
  Counter32 as mscVrPpTbseUnicastNoMatches  
  Counter32 as mscVrPpTbseStaticEntryDiscards  
  Counter32 as mscVrPpTbseDynamicEntryDiscards  
  Counter32 as mscVrPpTbseLearningDiscards  
  Counter32 as mscVrPpTbseInDiscards  
  Counter32 as mscVrPpTbseInFrames  
  Counter32 as mscVrPpTbseOutFrames  

MscVrPpTbseStpOperEntry  
SEQUENCE    
  INTEGER as mscVrPpTbseStpPortState  
  INTEGER as mscVrPpTbseStpTypeOper  
  Unsigned32 as mscVrPpTbseDesignatedCost  
  Unsigned32 as mscVrPpTbsePathCostOper  
  BridgeId as mscVrPpTbseDesignatedBridge  
  Hex as mscVrPpTbseDesignatedPort  
  Counter32 as mscVrPpTbseForwardTransitions  
  Counter32 as mscVrPpTbseBlockingDiscards  
  BridgeId as mscVrPpTbseDesignatedRoot  

MscVrPpTbseStatsEntry  
SEQUENCE    
  Counter32 as mscVrPpTbseBadAbstractDiscards  
  Counter32 as mscVrPpTbseTinygramFramesIn  
  Counter32 as mscVrPpTbseTinygramFramesOut  
  Counter32 as mscVrPpTbseInFilterDiscards  
  Counter32 as mscVrPpTbseOutFilterDiscards  

MscVrPpSrsgRowStatusEntry  
SEQUENCE    
  RowStatus as mscVrPpSrsgRowStatus  
  DisplayString as mscVrPpSrsgComponentName  
  StorageType as mscVrPpSrsgStorageType  
  NonReplicated as mscVrPpSrsgIndex  

MscVrPpSrsgProvEntry  
SEQUENCE    
  INTEGER as mscVrPpSrsgTranslateIpx  
  INTEGER as mscVrPpSrsgFragmentIp  
  INTEGER as mscVrPpSrsgServiceClass  
  INTEGER as mscVrPpSrsgConvertArpMacAddress  
  Unsigned32 as mscVrPpSrsgPortNum  

MscVrPpSrsgStpProvEntry  
SEQUENCE    
  INTEGER as mscVrPpSrsgAdminStatus  
  INTEGER as mscVrPpSrsgPortStateStpControl  
  INTEGER as mscVrPpSrsgStpTypeProv  
  Unsigned32 as mscVrPpSrsgPortPriority  
  Unsigned32 as mscVrPpSrsgPathCost  
  INTEGER as mscVrPpSrsgPathCostMethod  

MscVrPpSrsgDIProvEntry  
SEQUENCE    
  Unsigned32 as mscVrPpSrsgDomainNum  
  INTEGER as mscVrPpSrsgPreserveDomain  

MscVrPpSrsgStateEntry  
SEQUENCE    
  INTEGER as mscVrPpSrsgAdminState  
  INTEGER as mscVrPpSrsgOperationalState  
  INTEGER as mscVrPpSrsgUsageState  

MscVrPpSrsgOperStatusEntry  
SEQUENCE    
  INTEGER as mscVrPpSrsgSnmpOperStatus  

MscVrPpSrsgOperEntry  
SEQUENCE    
  AsciiString as mscVrPpSrsgPortName  
  Unsigned32 as mscVrPpSrsgUpTime  
  Unsigned32 as mscVrPpSrsgDownTime  
  INTEGER as mscVrPpSrsgBridgingMode  
  INTEGER as mscVrPpSrsgBridgePortConfig  
  INTEGER as mscVrPpSrsgBridgePortType  
  InterfaceIndex as mscVrPpSrsgIfIndex  
  Counter32 as mscVrPpSrsgDelayExceededDiscards  
  Counter32 as mscVrPpSrsgMtuExceededDiscards  

MscVrPpSrsgStpOperEntry  
SEQUENCE    
  INTEGER as mscVrPpSrsgStpPortState  
  INTEGER as mscVrPpSrsgStpTypeOper  
  Unsigned32 as mscVrPpSrsgDesignatedCost  
  Unsigned32 as mscVrPpSrsgPathCostOper  
  BridgeId as mscVrPpSrsgDesignatedBridge  
  Hex as mscVrPpSrsgDesignatedPort  
  Counter32 as mscVrPpSrsgForwardTransitions  
  Counter32 as mscVrPpSrsgBlockingDiscards  
  BridgeId as mscVrPpSrsgDesignatedRoot  

MscVrPpSrsgStatsEntry  
SEQUENCE    
  Counter32 as mscVrPpSrsgBadAbstractDiscards  
  Counter32 as mscVrPpSrsgTinygramFramesIn  
  Counter32 as mscVrPpSrsgTinygramFramesOut  
  Counter32 as mscVrPpSrsgInFilterDiscards  
  Counter32 as mscVrPpSrsgOutFilterDiscards  

MscVrPpSrsgSrProvEntry  
SEQUENCE    
  Unsigned32 as mscVrPpSrsgHopCount  
  INTEGER as mscVrPpSrsgExploreFrameTreatment  
  Unsigned32 as mscVrPpSrsgLanId  
  Unsigned32 as mscVrPpSrsgInternalLanId  
  Unsigned32 as mscVrPpSrsgBridgeNum  
  Unsigned32 as mscVrPpSrsgLargestFrame  
  INTEGER as mscVrPpSrsgSteSpanMode  
  Unsigned32 as mscVrPpSrsgAreRdLimit  
  Unsigned32 as mscVrPpSrsgSteRdLimit  

MscVrPpSrsgSrStatsEntry  
SEQUENCE    
  Counter32 as mscVrPpSrsgSpecInFrames  
  Counter32 as mscVrPpSrsgSpecOutFrames  
  Counter32 as mscVrPpSrsgApeInFrames  
  Counter32 as mscVrPpSrsgApeOutFrames  
  Counter32 as mscVrPpSrsgSteInFrames  
  Counter32 as mscVrPpSrsgSteOutFrames  
  Counter32 as mscVrPpSrsgSegmentMismatchDiscards  
  Counter32 as mscVrPpSrsgDupSegmentDiscards  
  Counter32 as mscVrPpSrsgHopCountExceededDiscards  
  Counter32 as mscVrPpSrsgDupLanIdOrTreeErrors  
  Counter32 as mscVrPpSrsgLanIdMismatches  
  Counter32 as mscVrPpSrsgStaticDiscards  
  Counter32 as mscVrPpSrsgDynamicDiscards  

MscVrPpTbsgRowStatusEntry  
SEQUENCE    
  RowStatus as mscVrPpTbsgRowStatus  
  DisplayString as mscVrPpTbsgComponentName  
  StorageType as mscVrPpTbsgStorageType  
  NonReplicated as mscVrPpTbsgIndex  

MscVrPpTbsgProvEntry  
SEQUENCE    
  INTEGER as mscVrPpTbsgTranslateIpx  
  INTEGER as mscVrPpTbsgFragmentIp  
  INTEGER as mscVrPpTbsgServiceClass  
  INTEGER as mscVrPpTbsgConvertArpMacAddress  
  Unsigned32 as mscVrPpTbsgPortNum  

MscVrPpTbsgTbProvEntry  
SEQUENCE    
  INTEGER as mscVrPpTbsgSecureOption  

MscVrPpTbsgStpProvEntry  
SEQUENCE    
  INTEGER as mscVrPpTbsgAdminStatus  
  INTEGER as mscVrPpTbsgPortStateStpControl  
  INTEGER as mscVrPpTbsgStpTypeProv  
  Unsigned32 as mscVrPpTbsgPortPriority  
  Unsigned32 as mscVrPpTbsgPathCost  
  INTEGER as mscVrPpTbsgPathCostMethod  

MscVrPpTbsgDIProvEntry  
SEQUENCE    
  Unsigned32 as mscVrPpTbsgDomainNum  
  INTEGER as mscVrPpTbsgPreserveDomain  

MscVrPpTbsgStateEntry  
SEQUENCE    
  INTEGER as mscVrPpTbsgAdminState  
  INTEGER as mscVrPpTbsgOperationalState  
  INTEGER as mscVrPpTbsgUsageState  

MscVrPpTbsgOperStatusEntry  
SEQUENCE    
  INTEGER as mscVrPpTbsgSnmpOperStatus  

MscVrPpTbsgOperEntry  
SEQUENCE    
  AsciiString as mscVrPpTbsgPortName  
  Unsigned32 as mscVrPpTbsgUpTime  
  Unsigned32 as mscVrPpTbsgDownTime  
  INTEGER as mscVrPpTbsgBridgingMode  
  INTEGER as mscVrPpTbsgBridgePortConfig  
  INTEGER as mscVrPpTbsgBridgePortType  
  InterfaceIndex as mscVrPpTbsgIfIndex  
  Counter32 as mscVrPpTbsgDelayExceededDiscards  
  Counter32 as mscVrPpTbsgMtuExceededDiscards  

MscVrPpTbsgTbOperEntry  
SEQUENCE    
  Unsigned32 as mscVrPpTbsgMaxInfo  
  Counter32 as mscVrPpTbsgBadVerifyDiscards  
  Counter32 as mscVrPpTbsgUnicastNoMatches  
  Counter32 as mscVrPpTbsgStaticEntryDiscards  
  Counter32 as mscVrPpTbsgDynamicEntryDiscards  
  Counter32 as mscVrPpTbsgLearningDiscards  
  Counter32 as mscVrPpTbsgInDiscards  
  Counter32 as mscVrPpTbsgInFrames  
  Counter32 as mscVrPpTbsgOutFrames  

MscVrPpTbsgStpOperEntry  
SEQUENCE    
  INTEGER as mscVrPpTbsgStpPortState  
  INTEGER as mscVrPpTbsgStpTypeOper  
  Unsigned32 as mscVrPpTbsgDesignatedCost  
  Unsigned32 as mscVrPpTbsgPathCostOper  
  BridgeId as mscVrPpTbsgDesignatedBridge  
  Hex as mscVrPpTbsgDesignatedPort  
  Counter32 as mscVrPpTbsgForwardTransitions  
  Counter32 as mscVrPpTbsgBlockingDiscards  
  BridgeId as mscVrPpTbsgDesignatedRoot  

MscVrPpTbsgStatsEntry  
SEQUENCE    
  Counter32 as mscVrPpTbsgBadAbstractDiscards  
  Counter32 as mscVrPpTbsgTinygramFramesIn  
  Counter32 as mscVrPpTbsgTinygramFramesOut  
  Counter32 as mscVrPpTbsgInFilterDiscards  
  Counter32 as mscVrPpTbsgOutFilterDiscards  

MscVrPpSrclRowStatusEntry  
SEQUENCE    
  RowStatus as mscVrPpSrclRowStatus  
  DisplayString as mscVrPpSrclComponentName  
  StorageType as mscVrPpSrclStorageType  
  NonReplicated as mscVrPpSrclIndex  

MscVrPpSrclProvEntry  
SEQUENCE    
  INTEGER as mscVrPpSrclTranslateIpx  
  INTEGER as mscVrPpSrclFragmentIp  
  INTEGER as mscVrPpSrclServiceClass  
  INTEGER as mscVrPpSrclConvertArpMacAddress  
  Unsigned32 as mscVrPpSrclPortNum  

MscVrPpSrclStpProvEntry  
SEQUENCE    
  INTEGER as mscVrPpSrclAdminStatus  
  INTEGER as mscVrPpSrclPortStateStpControl  
  INTEGER as mscVrPpSrclStpTypeProv  
  Unsigned32 as mscVrPpSrclPortPriority  
  Unsigned32 as mscVrPpSrclPathCost  
  INTEGER as mscVrPpSrclPathCostMethod  

MscVrPpSrclDIProvEntry  
SEQUENCE    
  Unsigned32 as mscVrPpSrclDomainNum  
  INTEGER as mscVrPpSrclPreserveDomain  

MscVrPpSrclStateEntry  
SEQUENCE    
  INTEGER as mscVrPpSrclAdminState  
  INTEGER as mscVrPpSrclOperationalState  
  INTEGER as mscVrPpSrclUsageState  

MscVrPpSrclOperStatusEntry  
SEQUENCE    
  INTEGER as mscVrPpSrclSnmpOperStatus  

MscVrPpSrclOperEntry  
SEQUENCE    
  AsciiString as mscVrPpSrclPortName  
  Unsigned32 as mscVrPpSrclUpTime  
  Unsigned32 as mscVrPpSrclDownTime  
  INTEGER as mscVrPpSrclBridgingMode  
  INTEGER as mscVrPpSrclBridgePortConfig  
  INTEGER as mscVrPpSrclBridgePortType  
  InterfaceIndex as mscVrPpSrclIfIndex  
  Counter32 as mscVrPpSrclDelayExceededDiscards  
  Counter32 as mscVrPpSrclMtuExceededDiscards  

MscVrPpSrclStpOperEntry  
SEQUENCE    
  INTEGER as mscVrPpSrclStpPortState  
  INTEGER as mscVrPpSrclStpTypeOper  
  Unsigned32 as mscVrPpSrclDesignatedCost  
  Unsigned32 as mscVrPpSrclPathCostOper  
  BridgeId as mscVrPpSrclDesignatedBridge  
  Hex as mscVrPpSrclDesignatedPort  
  Counter32 as mscVrPpSrclForwardTransitions  
  Counter32 as mscVrPpSrclBlockingDiscards  
  BridgeId as mscVrPpSrclDesignatedRoot  

MscVrPpSrclStatsEntry  
SEQUENCE    
  Counter32 as mscVrPpSrclBadAbstractDiscards  
  Counter32 as mscVrPpSrclTinygramFramesIn  
  Counter32 as mscVrPpSrclTinygramFramesOut  
  Counter32 as mscVrPpSrclInFilterDiscards  
  Counter32 as mscVrPpSrclOutFilterDiscards  

MscVrPpSrclSrProvEntry  
SEQUENCE    
  Unsigned32 as mscVrPpSrclHopCount  
  INTEGER as mscVrPpSrclExploreFrameTreatment  
  Unsigned32 as mscVrPpSrclLanId  
  Unsigned32 as mscVrPpSrclInternalLanId  
  Unsigned32 as mscVrPpSrclBridgeNum  
  Unsigned32 as mscVrPpSrclLargestFrame  
  INTEGER as mscVrPpSrclSteSpanMode  
  Unsigned32 as mscVrPpSrclAreRdLimit  
  Unsigned32 as mscVrPpSrclSteRdLimit  

MscVrPpSrclSrStatsEntry  
SEQUENCE    
  Counter32 as mscVrPpSrclSpecInFrames  
  Counter32 as mscVrPpSrclSpecOutFrames  
  Counter32 as mscVrPpSrclApeInFrames  
  Counter32 as mscVrPpSrclApeOutFrames  
  Counter32 as mscVrPpSrclSteInFrames  
  Counter32 as mscVrPpSrclSteOutFrames  
  Counter32 as mscVrPpSrclSegmentMismatchDiscards  
  Counter32 as mscVrPpSrclDupSegmentDiscards  
  Counter32 as mscVrPpSrclHopCountExceededDiscards  
  Counter32 as mscVrPpSrclDupLanIdOrTreeErrors  
  Counter32 as mscVrPpSrclLanIdMismatches  
  Counter32 as mscVrPpSrclStaticDiscards  
  Counter32 as mscVrPpSrclDynamicDiscards  

MscVrPpSrclNsRowStatusEntry  
SEQUENCE    
  RowStatus as mscVrPpSrclNsRowStatus  
  DisplayString as mscVrPpSrclNsComponentName  
  StorageType as mscVrPpSrclNsStorageType  
  NonReplicated as mscVrPpSrclNsIndex  

MscVrPpSrclNsProvEntry  
SEQUENCE    
  AsciiString as mscVrPpSrclNsIncomingFilter  
  AsciiString as mscVrPpSrclNsOutgoingFilter  

MscVrBrRowStatusEntry  
SEQUENCE    
  RowStatus as mscVrBrRowStatus  
  DisplayString as mscVrBrComponentName  
  StorageType as mscVrBrStorageType  
  NonReplicated as mscVrBrIndex  

MscVrBrAdminControlEntry  
SEQUENCE    
  INTEGER as mscVrBrAdminStatus  

MscVrBrStateEntry  
SEQUENCE    
  INTEGER as mscVrBrAdminState  
  INTEGER as mscVrBrOperationalState  
  INTEGER as mscVrBrUsageState  

MscVrBrOperStatusEntry  
SEQUENCE    
  INTEGER as mscVrBrSnmpOperStatus  

MscVrBrOperEntry  
SEQUENCE    
  MacAddress as mscVrBrBridgeAddress  
  Gauge32 as mscVrBrNumPorts  
  INTEGER as mscVrBrType  

MscVrBrPteRowStatusEntry  
SEQUENCE    
  RowStatus as mscVrBrPteRowStatus  
  DisplayString as mscVrBrPteComponentName  
  StorageType as mscVrBrPteStorageType  
  Integer32 as mscVrBrPteDomainNumIndex  
  AsciiStringIndex as mscVrBrPtePortNameIndex  
  INTEGER as mscVrBrPteModeIndex  

MscVrBrPteOperEntry  
SEQUENCE    
  INTEGER as mscVrBrPteMacType  
  INTEGER as mscVrBrPteStpState  
  INTEGER as mscVrBrPteStpType  
  INTEGER as mscVrBrPteFilterPoints  
  INTEGER as mscVrBrPtePortPointsTo  

MscVrBrPteSpOperEntry  
SEQUENCE    
  Unsigned32 as mscVrBrPteLanId  
  Unsigned32 as mscVrBrPteInternalLanId  
  Unsigned32 as mscVrBrPteBridgeNum  

MscVrBrNsRowStatusEntry  
SEQUENCE    
  RowStatus as mscVrBrNsRowStatus  
  DisplayString as mscVrBrNsComponentName  
  StorageType as mscVrBrNsStorageType  
  NonReplicated as mscVrBrNsIndex  

MscVrBrNsProvEntry  
SEQUENCE    
  AsciiString as mscVrBrNsFirstFilter  
  AsciiString as mscVrBrNsLastFilter  

MscVrBrNsAteRowStatusEntry  
SEQUENCE    
  RowStatus as mscVrBrNsAteRowStatus  
  DisplayString as mscVrBrNsAteComponentName  
  StorageType as mscVrBrNsAteStorageType  
  Integer32 as mscVrBrNsAteEntryNumberIndex  

MscVrBrNsAteProvEntry  
SEQUENCE    
  Unsigned32 as mscVrBrNsAteDomainNum  
  MacAddress as mscVrBrNsAteFirstMacAddress  
  MacAddress as mscVrBrNsAteFirstMacAddressMask  
  MacAddress as mscVrBrNsAteSecondMacAddress  
  MacAddress as mscVrBrNsAteSecondMacAddressMask  
  INTEGER as mscVrBrNsAteDirection  
  AsciiString as mscVrBrNsAteFilterName  

MscVrBrTbRowStatusEntry  
SEQUENCE    
  RowStatus as mscVrBrTbRowStatus  
  DisplayString as mscVrBrTbComponentName  
  StorageType as mscVrBrTbStorageType  
  NonReplicated as mscVrBrTbIndex  

MscVrBrTbProvEntry  
SEQUENCE    
  Unsigned32 as mscVrBrTbFwdTableNumEntries  
  Unsigned32 as mscVrBrTbAgingTime  

MscVrBrTbStatsEntry  
SEQUENCE    
  Counter32 as mscVrBrTbLearnedEntryDiscards  
  Counter32 as mscVrBrTbTotalForwardingTableEntries  
  Gauge32 as mscVrBrTbNumFtEntriesFree  
  Counter32 as mscVrBrTbNumFtEntriesDenied  

MscVrBrTbStpRowStatusEntry  
SEQUENCE    
  RowStatus as mscVrBrTbStpRowStatus  
  DisplayString as mscVrBrTbStpComponentName  
  StorageType as mscVrBrTbStpStorageType  
  Integer32 as mscVrBrTbStpIndex  

MscVrBrTbStpProvEntry  
SEQUENCE    
  INTEGER as mscVrBrTbStpStpMode  
  INTEGER as mscVrBrTbStpProtocolSpec  
  Unsigned32 as mscVrBrTbStpPriority  
  Unsigned32 as mscVrBrTbStpBridgeMaxAge  
  Unsigned32 as mscVrBrTbStpBridgeHelloTime  
  Unsigned32 as mscVrBrTbStpBridgeForwardDelay  

MscVrBrTbStpOperEntry  
SEQUENCE    
  BridgeId as mscVrBrTbStpBridgeId  
  AsciiString as mscVrBrTbStpRootPortName  
  Unsigned32 as mscVrBrTbStpTimeSinceTopologyChange  
  INTEGER as mscVrBrTbStpTopologyChangeDetect  
  Counter32 as mscVrBrTbStpTopologyChanges  
  BridgeId as mscVrBrTbStpDesignatedRoot  
  Unsigned32 as mscVrBrTbStpRootCost  
  Unsigned32 as mscVrBrTbStpMaxAge  
  Unsigned32 as mscVrBrTbStpAgingTimeOper  
  Unsigned32 as mscVrBrTbStpHelloTime  
  Unsigned32 as mscVrBrTbStpHoldTime  
  Unsigned32 as mscVrBrTbStpFwdDelay  

MscVrBrTbSteRowStatusEntry  
SEQUENCE    
  RowStatus as mscVrBrTbSteRowStatus  
  DisplayString as mscVrBrTbSteComponentName  
  StorageType as mscVrBrTbSteStorageType  
  DashedHexString as mscVrBrTbSteAddressIndex  
  AsciiStringIndex as mscVrBrTbSteReceivePortIndex  

MscVrBrTbSteProvEntry  
SEQUENCE    
  INTEGER as mscVrBrTbSteStatus  

MscVrBrTbSteAtgtEntry  
SEQUENCE    
  AsciiString as mscVrBrTbSteAtgtValue  
  RowStatus as mscVrBrTbSteAtgtRowStatus  

MscVrBrTbFteRowStatusEntry  
SEQUENCE    
  RowStatus as mscVrBrTbFteRowStatus  
  DisplayString as mscVrBrTbFteComponentName  
  StorageType as mscVrBrTbFteStorageType  
  DashedHexString as mscVrBrTbFteAddressIndex  
  Integer32 as mscVrBrTbFteDomainNumIndex  

MscVrBrTbFteOperEntry  
SEQUENCE    
  AsciiString as mscVrBrTbFtePort  
  Gauge32 as mscVrBrTbFteAgeOfEntry  
  BridgeId as mscVrBrTbFtePeerAddressInfo  
  INTEGER as mscVrBrTbFteStatus  

MscVrBrTbNcFteRowStatusEntry  
SEQUENCE    
  RowStatus as mscVrBrTbNcFteRowStatus  
  DisplayString as mscVrBrTbNcFteComponentName  
  StorageType as mscVrBrTbNcFteStorageType  
  DashedHexString as mscVrBrTbNcFteAddressIndex  
  Integer32 as mscVrBrTbNcFteDomainNumIndex  

MscVrBrTbNcFteOperEntry  
SEQUENCE    
  AsciiString as mscVrBrTbNcFtePort  
  Gauge32 as mscVrBrTbNcFteAgeOfEntry  
  BridgeId as mscVrBrTbNcFtePeerAddressInfo  
  INTEGER as mscVrBrTbNcFteStatus  

MscVrBrSrbRowStatusEntry  
SEQUENCE    
  RowStatus as mscVrBrSrbRowStatus  
  DisplayString as mscVrBrSrbComponentName  
  StorageType as mscVrBrSrbStorageType  
  NonReplicated as mscVrBrSrbIndex  

MscVrBrSrbProvEntry  
SEQUENCE    
  Unsigned32 as mscVrBrSrbLanIdTableNumEntries  
  Unsigned32 as mscVrBrSrbAgingTime  
  INTEGER as mscVrBrSrbBridgeLfMode  

MscVrBrSrbStatsEntry  
SEQUENCE    
  Counter32 as mscVrBrSrbTotalLanIdTableEntries  
  Counter32 as mscVrBrSrbNumLanIdtEntriesFree  
  Counter32 as mscVrBrSrbNumLanIdtEntriesDenied  

MscVrBrSrbStpRowStatusEntry  
SEQUENCE    
  RowStatus as mscVrBrSrbStpRowStatus  
  DisplayString as mscVrBrSrbStpComponentName  
  StorageType as mscVrBrSrbStpStorageType  
  Integer32 as mscVrBrSrbStpIndex  

MscVrBrSrbStpProvEntry  
SEQUENCE    
  INTEGER as mscVrBrSrbStpStpMode  
  INTEGER as mscVrBrSrbStpProtocolSpec  
  Unsigned32 as mscVrBrSrbStpPriority  
  Unsigned32 as mscVrBrSrbStpBridgeMaxAge  
  Unsigned32 as mscVrBrSrbStpBridgeHelloTime  
  Unsigned32 as mscVrBrSrbStpBridgeForwardDelay  

MscVrBrSrbStpOperEntry  
SEQUENCE    
  BridgeId as mscVrBrSrbStpBridgeId  
  AsciiString as mscVrBrSrbStpRootPortName  
  Unsigned32 as mscVrBrSrbStpTimeSinceTopologyChange  
  INTEGER as mscVrBrSrbStpTopologyChangeDetect  
  Counter32 as mscVrBrSrbStpTopologyChanges  
  BridgeId as mscVrBrSrbStpDesignatedRoot  
  Unsigned32 as mscVrBrSrbStpRootCost  
  Unsigned32 as mscVrBrSrbStpMaxAge  
  Unsigned32 as mscVrBrSrbStpAgingTimeOper  
  Unsigned32 as mscVrBrSrbStpHelloTime  
  Unsigned32 as mscVrBrSrbStpHoldTime  
  Unsigned32 as mscVrBrSrbStpFwdDelay  

MscVrBrSrbLteRowStatusEntry  
SEQUENCE    
  RowStatus as mscVrBrSrbLteRowStatus  
  DisplayString as mscVrBrSrbLteComponentName  
  StorageType as mscVrBrSrbLteStorageType  
  Integer32 as mscVrBrSrbLteLanIdIndex  
  Integer32 as mscVrBrSrbLteDomainNumIndex  

MscVrBrSrbLteOperEntry  
SEQUENCE    
  AsciiString as mscVrBrSrbLtePortName  
  Unsigned32 as mscVrBrSrbLteAgeOfEntry  
  DashedHexString as mscVrBrSrbLtePeerMACAddress  
  INTEGER as mscVrBrSrbLteTypeOfEntry  

MscCBRowStatusEntry  
SEQUENCE    
  RowStatus as mscCBRowStatus  
  DisplayString as mscCBComponentName  
  StorageType as mscCBStorageType  
  NonReplicated as mscCBIndex  

MscCBAdminControlEntry  
SEQUENCE    
  INTEGER as mscCBSnmpAdminStatus  

MscCBIfEntryEntry  
SEQUENCE    
  INTEGER as mscCBIfAdminStatus  
  InterfaceIndex as mscCBIfIndex  

MscCBMpEntry  
SEQUENCE    
  Link as mscCBLinkToProtocolPort  

MscCBOperEntry  
SEQUENCE    
  MacAddress as mscCBMacAddress  

MscCBStateEntry  
SEQUENCE    
  INTEGER as mscCBAdminState  
  INTEGER as mscCBOperationalState  
  INTEGER as mscCBUsageState  

MscCBOperStatusEntry  
SEQUENCE    
  INTEGER as mscCBSnmpOperStatus  

MscPBRowStatusEntry  
SEQUENCE    
  RowStatus as mscPBRowStatus  
  DisplayString as mscPBComponentName  
  StorageType as mscPBStorageType  
  NonReplicated as mscPBIndex  

MscPBAdminControlEntry  
SEQUENCE    
  INTEGER as mscPBSnmpAdminStatus  

MscPBIfEntryEntry  
SEQUENCE    
  INTEGER as mscPBIfAdminStatus  
  InterfaceIndex as mscPBIfIndex  

MscPBMpEntry  
SEQUENCE    
  Link as mscPBLinkToProtocolPort  

MscPBOperEntry  
SEQUENCE    
  HexString as mscPBMacAddress  

MscPBStateEntry  
SEQUENCE    
  INTEGER as mscPBAdminState  
  INTEGER as mscPBOperationalState  
  INTEGER as mscPBUsageState  

MscPBOperStatusEntry  
SEQUENCE    
  INTEGER as mscPBSnmpOperStatus