Nortel-MsCarrier-MscPassport-FrameRelayDteMIB

File: Nortel-MsCarrier-MscPassport-FrameRelayDteMIB.mib (147003 bytes)

Imported modules

RFC-1212 Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB
Nortel-MsCarrier-MscPassport-TextualConventionsMIB

Imported symbols

OBJECT-TYPE mscPassportMIBs mscComponents
Counter32 DisplayString StorageType
RowStatus InterfaceIndex Gauge32
Integer32 Unsigned32 DashedHexString
NonReplicated HexString EnterpriseDateAndTime
PassportCounter64 Link

Defined Objects

mscFrDte 1.3.6.1.4.1.562.36.2.1.101
OBJECT IDENTIFIER    

mscFrDteRowStatusTable 1.3.6.1.4.1.562.36.2.1.101.1
This entry controls the addition and deletion of mscFrDte components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteRowStatusEntry

mscFrDteRowStatusEntry 1.3.6.1.4.1.562.36.2.1.101.1.1
A single entry in the table represents a single mscFrDte component.
OBJECT-TYPE    
  MscFrDteRowStatusEntry  

mscFrDteRowStatus 1.3.6.1.4.1.562.36.2.1.101.1.1.1
This variable is used as the basis for SNMP naming of mscFrDte components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscFrDteComponentName 1.3.6.1.4.1.562.36.2.1.101.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrDteStorageType 1.3.6.1.4.1.562.36.2.1.101.1.1.4
This variable represents the storage type value for the mscFrDte tables.
OBJECT-TYPE    
  StorageType  

mscFrDteIndex 1.3.6.1.4.1.562.36.2.1.101.1.1.10
This variable represents the index for the mscFrDte tables.
OBJECT-TYPE    
  Integer32 1..65535  

mscFrDteFramer 1.3.6.1.4.1.562.36.2.1.101.2
OBJECT IDENTIFIER    

mscFrDteFramerRowStatusTable 1.3.6.1.4.1.562.36.2.1.101.2.1
This entry controls the addition and deletion of mscFrDteFramer components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteFramerRowStatusEntry

mscFrDteFramerRowStatusEntry 1.3.6.1.4.1.562.36.2.1.101.2.1.1
A single entry in the table represents a single mscFrDteFramer component.
OBJECT-TYPE    
  MscFrDteFramerRowStatusEntry  

mscFrDteFramerRowStatus 1.3.6.1.4.1.562.36.2.1.101.2.1.1.1
This variable is used as the basis for SNMP naming of mscFrDteFramer components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscFrDteFramerComponentName 1.3.6.1.4.1.562.36.2.1.101.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrDteFramerStorageType 1.3.6.1.4.1.562.36.2.1.101.2.1.1.4
This variable represents the storage type value for the mscFrDteFramer tables.
OBJECT-TYPE    
  StorageType  

mscFrDteFramerIndex 1.3.6.1.4.1.562.36.2.1.101.2.1.1.10
This variable represents the index for the mscFrDteFramer tables.
OBJECT-TYPE    
  NonReplicated  

mscFrDteFramerProvTable 1.3.6.1.4.1.562.36.2.1.101.2.10
This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisional Framer groups.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteFramerProvEntry

mscFrDteFramerProvEntry 1.3.6.1.4.1.562.36.2.1.101.2.10.1
An entry in the mscFrDteFramerProvTable.
OBJECT-TYPE    
  MscFrDteFramerProvEntry  

mscFrDteFramerInterfaceName 1.3.6.1.4.1.562.36.2.1.101.2.10.1.1
This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run.
OBJECT-TYPE    
  Link  

mscFrDteFramerStateTable 1.3.6.1.4.1.562.36.2.1.101.2.12
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteFramerStateEntry

mscFrDteFramerStateEntry 1.3.6.1.4.1.562.36.2.1.101.2.12.1
An entry in the mscFrDteFramerStateTable.
OBJECT-TYPE    
  MscFrDteFramerStateEntry  

mscFrDteFramerAdminState 1.3.6.1.4.1.562.36.2.1.101.2.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscFrDteFramerOperationalState 1.3.6.1.4.1.562.36.2.1.101.2.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscFrDteFramerUsageState 1.3.6.1.4.1.562.36.2.1.101.2.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscFrDteFramerStatsTable 1.3.6.1.4.1.562.36.2.1.101.2.13
This group contains the operational statistics data for a Framer component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteFramerStatsEntry

mscFrDteFramerStatsEntry 1.3.6.1.4.1.562.36.2.1.101.2.13.1
An entry in the mscFrDteFramerStatsTable.
OBJECT-TYPE    
  MscFrDteFramerStatsEntry  

mscFrDteFramerFrmToIf 1.3.6.1.4.1.562.36.2.1.101.2.13.1.1
This attribute counts the number of frames transmitted to the link interface by Framer. Note: This does not include the number of frames transmitted directly to the hardware queue, thus bypassing the Framer component.
OBJECT-TYPE    
  Counter32  

mscFrDteFramerFrmFromIf 1.3.6.1.4.1.562.36.2.1.101.2.13.1.2
This attribute counts the number of frames received from the link interface by Framer.
OBJECT-TYPE    
  Counter32  

mscFrDteFramerAborts 1.3.6.1.4.1.562.36.2.1.101.2.13.1.3
This attribute counts the total number of aborts received.
OBJECT-TYPE    
  Counter32  

mscFrDteFramerCrcErrors 1.3.6.1.4.1.562.36.2.1.101.2.13.1.4
This attribute counts the total number of frames with CRC errors.
OBJECT-TYPE    
  Counter32  

mscFrDteFramerLrcErrors 1.3.6.1.4.1.562.36.2.1.101.2.13.1.5
This attribute counts the total number of frames with LRC errors.
OBJECT-TYPE    
  Counter32  

mscFrDteFramerNonOctetErrors 1.3.6.1.4.1.562.36.2.1.101.2.13.1.6
This attribute counts the total number of frames that were non octet aligned.
OBJECT-TYPE    
  Counter32  

mscFrDteFramerOverruns 1.3.6.1.4.1.562.36.2.1.101.2.13.1.7
This attribute counts the total number of frames received from the link for which overruns occurred.
OBJECT-TYPE    
  Counter32  

mscFrDteFramerUnderruns 1.3.6.1.4.1.562.36.2.1.101.2.13.1.8
This attribute counts the total number of frames transmitted to the link for which underruns occurred.
OBJECT-TYPE    
  Counter32  

mscFrDteFramerLargeFrmErrors 1.3.6.1.4.1.562.36.2.1.101.2.13.1.9
This attribute counts the total number of frames received which were too large. The frame exceeded the maximumFrameLengthLimit provisioned attribute or it contained more than the 255 block hardware limit.
OBJECT-TYPE    
  Counter32  

mscFrDteFramerUtilTable 1.3.6.1.4.1.562.36.2.1.101.2.14
This group contains the link utilization operational data for a Framer component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteFramerUtilEntry

mscFrDteFramerUtilEntry 1.3.6.1.4.1.562.36.2.1.101.2.14.1
An entry in the mscFrDteFramerUtilTable.
OBJECT-TYPE    
  MscFrDteFramerUtilEntry  

mscFrDteFramerNormPrioLinkUtilToIf 1.3.6.1.4.1.562.36.2.1.101.2.14.1.1
This attribute is the utilization of the normal priority data sent to the link as a percentage of the available bandwidth on the link. The utilization is the average for the last minute.
OBJECT-TYPE    
  Gauge32 0..100  

mscFrDteFramerNormPrioLinkUtilFromIf 1.3.6.1.4.1.562.36.2.1.101.2.14.1.3
This attribute is the utilization of the normal priority data received from the link as a percentage of the available bandwidth on the link. The utilization is the average for the last minute.
OBJECT-TYPE    
  Gauge32 0..100  

mscFrDteLmi 1.3.6.1.4.1.562.36.2.1.101.3
OBJECT IDENTIFIER    

mscFrDteLmiRowStatusTable 1.3.6.1.4.1.562.36.2.1.101.3.1
This entry controls the addition and deletion of mscFrDteLmi components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteLmiRowStatusEntry

mscFrDteLmiRowStatusEntry 1.3.6.1.4.1.562.36.2.1.101.3.1.1
A single entry in the table represents a single mscFrDteLmi component.
OBJECT-TYPE    
  MscFrDteLmiRowStatusEntry  

mscFrDteLmiRowStatus 1.3.6.1.4.1.562.36.2.1.101.3.1.1.1
This variable is used as the basis for SNMP naming of mscFrDteLmi components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscFrDteLmiComponentName 1.3.6.1.4.1.562.36.2.1.101.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrDteLmiStorageType 1.3.6.1.4.1.562.36.2.1.101.3.1.1.4
This variable represents the storage type value for the mscFrDteLmi tables.
OBJECT-TYPE    
  StorageType  

mscFrDteLmiIndex 1.3.6.1.4.1.562.36.2.1.101.3.1.1.10
This variable represents the index for the mscFrDteLmi tables.
OBJECT-TYPE    
  NonReplicated  

mscFrDteLmiProvTable 1.3.6.1.4.1.562.36.2.1.101.3.10
This group contains the provisioned attributes for the Lmi component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteLmiProvEntry

mscFrDteLmiProvEntry 1.3.6.1.4.1.562.36.2.1.101.3.10.1
An entry in the mscFrDteLmiProvTable.
OBJECT-TYPE    
  MscFrDteLmiProvEntry  

mscFrDteLmiProcedures 1.3.6.1.4.1.562.36.2.1.101.3.10.1.1
This attribute selects the Local Management Interface (LMI) protocol to be used on the interface. This attribute is equivalent to the SNMP variable frDlcmiState. The vendorForum LMI protocol automatically implies that the DLCI used by the protocol is 1023. The ansi (T1.617 Annex D) and ccitt (Q.933 Annex A) LMI protocols use DLCI 0. If none is selected, no LMI procedures will run on the interface.
OBJECT-TYPE    
  INTEGER none(1), vendorForum(2), ansi(3), ccitt(5)  

mscFrDteLmiPollingInterval 1.3.6.1.4.1.562.36.2.1.101.3.10.1.4
This is the number of seconds between successive status enquiry messages. This field corresponds to the parameter T391 described in the ANSI T1.617-1991 Annex D.
OBJECT-TYPE    
  Unsigned32 5..30  

mscFrDteLmiFullEnquiryInterval 1.3.6.1.4.1.562.36.2.1.101.3.10.1.5
The count of status polls before a full status enquiry message is issued. Every nth poll will request a full status. This field corresponds to the parameter N391 described in the ANSI T1.617-1991 Annex D.
OBJECT-TYPE    
  Unsigned32 1..255  

mscFrDteLmiErrorThreshold 1.3.6.1.4.1.562.36.2.1.101.3.10.1.6
The number of errors detected within the monitored events window before declaring the link non-functional. This field corresponds to the parameter N392 described in the ANSI T1.617-1991 Annex D.
OBJECT-TYPE    
  Unsigned32 1..10  

mscFrDteLmiMonitoredEvents 1.3.6.1.4.1.562.36.2.1.101.3.10.1.7
The number of status polling intervals over which the errorthreshold is counted This is used to determine if the errorThreshold is exceeded. This field corresponds to the parameter N393 described in the ANSI T1.617-1991 Annex D.
OBJECT-TYPE    
  Unsigned32 1..10  

mscFrDteLmiOperTable 1.3.6.1.4.1.562.36.2.1.101.3.11
This group contains the operational attributes for the Lmi component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteLmiOperEntry

mscFrDteLmiOperEntry 1.3.6.1.4.1.562.36.2.1.101.3.11.1
An entry in the mscFrDteLmiOperTable.
OBJECT-TYPE    
  MscFrDteLmiOperEntry  

mscFrDteLmiLmiStatus 1.3.6.1.4.1.562.36.2.1.101.3.11.1.2
This indicates the status of the Frame Relay interface as determined by the performance of the link management interface (LMI). If no LMI is running, lmiStatus will stay in the running state indefinitely.
OBJECT-TYPE    
  INTEGER running(1), fault(2), initializing(3)  

mscFrDteRg 1.3.6.1.4.1.562.36.2.1.101.4
OBJECT IDENTIFIER    

mscFrDteRgRowStatusTable 1.3.6.1.4.1.562.36.2.1.101.4.1
This entry controls the addition and deletion of mscFrDteRg components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteRgRowStatusEntry

mscFrDteRgRowStatusEntry 1.3.6.1.4.1.562.36.2.1.101.4.1.1
A single entry in the table represents a single mscFrDteRg component.
OBJECT-TYPE    
  MscFrDteRgRowStatusEntry  

mscFrDteRgRowStatus 1.3.6.1.4.1.562.36.2.1.101.4.1.1.1
This variable is used as the basis for SNMP naming of mscFrDteRg components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscFrDteRgComponentName 1.3.6.1.4.1.562.36.2.1.101.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrDteRgStorageType 1.3.6.1.4.1.562.36.2.1.101.4.1.1.4
This variable represents the storage type value for the mscFrDteRg tables.
OBJECT-TYPE    
  StorageType  

mscFrDteRgIndex 1.3.6.1.4.1.562.36.2.1.101.4.1.1.10
This variable represents the index for the mscFrDteRg tables.
OBJECT-TYPE    
  Integer32 1..256  

mscFrDteRgIfEntryTable 1.3.6.1.4.1.562.36.2.1.101.4.10
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteRgIfEntryEntry

mscFrDteRgIfEntryEntry 1.3.6.1.4.1.562.36.2.1.101.4.10.1
An entry in the mscFrDteRgIfEntryTable.
OBJECT-TYPE    
  MscFrDteRgIfEntryEntry  

mscFrDteRgIfAdminStatus 1.3.6.1.4.1.562.36.2.1.101.4.10.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscFrDteRgIfIndex 1.3.6.1.4.1.562.36.2.1.101.4.10.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscFrDteRgProvTable 1.3.6.1.4.1.562.36.2.1.101.4.11
This group contains the provisioned attributes for the Remote Group component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteRgProvEntry

mscFrDteRgProvEntry 1.3.6.1.4.1.562.36.2.1.101.4.11.1
An entry in the mscFrDteRgProvTable.
OBJECT-TYPE    
  MscFrDteRgProvEntry  

mscFrDteRgMaxTransmissionUnit 1.3.6.1.4.1.562.36.2.1.101.4.11.1.1
The Maximum Transmission Unit size of the largest datagram (including Frame Relay header) which can be sent on the interface.
OBJECT-TYPE    
  Unsigned32 262..9190  

mscFrDteRgMpTable 1.3.6.1.4.1.562.36.2.1.101.4.12
This group contains the base provisioning data for the Media Application component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteRgMpEntry

mscFrDteRgMpEntry 1.3.6.1.4.1.562.36.2.1.101.4.12.1
An entry in the mscFrDteRgMpTable.
OBJECT-TYPE    
  MscFrDteRgMpEntry  

mscFrDteRgLinkToProtocolPort 1.3.6.1.4.1.562.36.2.1.101.4.12.1.1
This attribute contains a protocol port component name. The attribute associates the application with a protocol port.
OBJECT-TYPE    
  Link  

mscFrDteRgStateTable 1.3.6.1.4.1.562.36.2.1.101.4.13
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteRgStateEntry

mscFrDteRgStateEntry 1.3.6.1.4.1.562.36.2.1.101.4.13.1
An entry in the mscFrDteRgStateTable.
OBJECT-TYPE    
  MscFrDteRgStateEntry  

mscFrDteRgAdminState 1.3.6.1.4.1.562.36.2.1.101.4.13.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscFrDteRgOperationalState 1.3.6.1.4.1.562.36.2.1.101.4.13.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscFrDteRgUsageState 1.3.6.1.4.1.562.36.2.1.101.4.13.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscFrDteRgOperStatusTable 1.3.6.1.4.1.562.36.2.1.101.4.14
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteRgOperStatusEntry

mscFrDteRgOperStatusEntry 1.3.6.1.4.1.562.36.2.1.101.4.14.1
An entry in the mscFrDteRgOperStatusTable.
OBJECT-TYPE    
  MscFrDteRgOperStatusEntry  

mscFrDteRgSnmpOperStatus 1.3.6.1.4.1.562.36.2.1.101.4.14.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscFrDteRgBfr 1.3.6.1.4.1.562.36.2.1.101.4.15
OBJECT IDENTIFIER    

mscFrDteRgBfrRowStatusTable 1.3.6.1.4.1.562.36.2.1.101.4.15.1
This entry controls the addition and deletion of mscFrDteRgBfr components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteRgBfrRowStatusEntry

mscFrDteRgBfrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.101.4.15.1.1
A single entry in the table represents a single mscFrDteRgBfr component.
OBJECT-TYPE    
  MscFrDteRgBfrRowStatusEntry  

mscFrDteRgBfrRowStatus 1.3.6.1.4.1.562.36.2.1.101.4.15.1.1.1
This variable is used as the basis for SNMP naming of mscFrDteRgBfr components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscFrDteRgBfrComponentName 1.3.6.1.4.1.562.36.2.1.101.4.15.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrDteRgBfrStorageType 1.3.6.1.4.1.562.36.2.1.101.4.15.1.1.4
This variable represents the storage type value for the mscFrDteRgBfr tables.
OBJECT-TYPE    
  StorageType  

mscFrDteRgBfrIndex 1.3.6.1.4.1.562.36.2.1.101.4.15.1.1.10
This variable represents the index for the mscFrDteRgBfr tables.
OBJECT-TYPE    
  NonReplicated  

mscFrDteRgBfrProvTable 1.3.6.1.4.1.562.36.2.1.101.4.15.10
This group contains the provisioning attributes for the Bfr component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteRgBfrProvEntry

mscFrDteRgBfrProvEntry 1.3.6.1.4.1.562.36.2.1.101.4.15.10.1
An entry in the mscFrDteRgBfrProvTable.
OBJECT-TYPE    
  MscFrDteRgBfrProvEntry  

mscFrDteRgBfrMacType 1.3.6.1.4.1.562.36.2.1.101.4.15.10.1.1
This attribute specifies the MAC address type of the Bfr component. The value must be chosen based on the media of the traffic source. For traffic originated from FDDI, use fddi; for ethernet, use enet; for token ring, use tokenRing
OBJECT-TYPE    
  INTEGER fddi(0), enet(1), tokenRing(2)  

mscFrDteRgBfrBfrIndex 1.3.6.1.4.1.562.36.2.1.101.4.15.10.1.2
This attribute specifies the value which is used to derive a unique MAC address for the Bfr. The bfrIndex must be unique across all Bfrs on the same Lp.
OBJECT-TYPE    
  INTEGER 0..511  

mscFrDteRgBfrOprTable 1.3.6.1.4.1.562.36.2.1.101.4.15.11
This group contains the operational attributes for the Bfr component..
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteRgBfrOprEntry

mscFrDteRgBfrOprEntry 1.3.6.1.4.1.562.36.2.1.101.4.15.11.1
An entry in the mscFrDteRgBfrOprTable.
OBJECT-TYPE    
  MscFrDteRgBfrOprEntry  

mscFrDteRgBfrMacAddr 1.3.6.1.4.1.562.36.2.1.101.4.15.11.1.1
This attribute indicates the unique MAC address of the Bfr component. This value is derived by the value of the attribute bfrIndex. The value is displayed as cannonical format.
OBJECT-TYPE    
  DashedHexString SIZE(6)  

mscFrDteRgLtDlciTable 1.3.6.1.4.1.562.36.2.1.101.4.219
This attribute associates a Rg component with zero or more StDlci components. The Rg and StDlci components must be under the same FrDte component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteRgLtDlciEntry

mscFrDteRgLtDlciEntry 1.3.6.1.4.1.562.36.2.1.101.4.219.1
An entry in the mscFrDteRgLtDlciTable.
OBJECT-TYPE    
  MscFrDteRgLtDlciEntry  

mscFrDteRgLtDlciValue 1.3.6.1.4.1.562.36.2.1.101.4.219.1.1
This variable represents both the value and the index for the mscFrDteRgLtDlciTable.
OBJECT-TYPE    
  Link  

mscFrDteRgLtDlciRowStatus 1.3.6.1.4.1.562.36.2.1.101.4.219.1.2
This variable is used to control the addition and deletion of individual values of the mscFrDteRgLtDlciTable.
OBJECT-TYPE    
  RowStatus  

mscFrDteDynDlciDefs 1.3.6.1.4.1.562.36.2.1.101.5
OBJECT IDENTIFIER    

mscFrDteDynDlciDefsRowStatusTable 1.3.6.1.4.1.562.36.2.1.101.5.1
This entry controls the addition and deletion of mscFrDteDynDlciDefs components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteDynDlciDefsRowStatusEntry

mscFrDteDynDlciDefsRowStatusEntry 1.3.6.1.4.1.562.36.2.1.101.5.1.1
A single entry in the table represents a single mscFrDteDynDlciDefs component.
OBJECT-TYPE    
  MscFrDteDynDlciDefsRowStatusEntry  

mscFrDteDynDlciDefsRowStatus 1.3.6.1.4.1.562.36.2.1.101.5.1.1.1
This variable is used as the basis for SNMP naming of mscFrDteDynDlciDefs components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscFrDteDynDlciDefsComponentName 1.3.6.1.4.1.562.36.2.1.101.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrDteDynDlciDefsStorageType 1.3.6.1.4.1.562.36.2.1.101.5.1.1.4
This variable represents the storage type value for the mscFrDteDynDlciDefs tables.
OBJECT-TYPE    
  StorageType  

mscFrDteDynDlciDefsIndex 1.3.6.1.4.1.562.36.2.1.101.5.1.1.10
This variable represents the index for the mscFrDteDynDlciDefs tables.
OBJECT-TYPE    
  NonReplicated  

mscFrDteDynDlciDefsProvTable 1.3.6.1.4.1.562.36.2.1.101.5.10
This group contains the provisioned attributes for a virtual circuit. These attributes represent the default settings for the resulting Dlci components and can be operationally changed using the corresponding attributes under the Dlci component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteDynDlciDefsProvEntry

mscFrDteDynDlciDefsProvEntry 1.3.6.1.4.1.562.36.2.1.101.5.10.1
An entry in the mscFrDteDynDlciDefsProvTable.
OBJECT-TYPE    
  MscFrDteDynDlciDefsProvEntry  

mscFrDteDynDlciDefsStdRowStatus 1.3.6.1.4.1.562.36.2.1.101.5.10.1.1
This attribute is used to manage the status of a StDlci component. Set to active to enable the StDlci component. Set to notInService to disable the StDlci component. Set to createAndGo (SNMP only) to create a new StDlci component. Set to destroy (SNMP only) to delete an existing StDlci component.
OBJECT-TYPE    
  INTEGER active(1), notInService(2)  

mscFrDteDynDlciDefsRateEnforcement 1.3.6.1.4.1.562.36.2.1.101.5.10.1.2
This attribute specifies whether the CIR attributes committedInformationRate, committedBurst, and excessBurst are used to define rate enforcement on this user DLCI. If rateEnforcement is enabled, and the combined Committed and Excess burst thresholds are exceeded, the frame in violation will be discarded immediately if a HibernationQueue subcomponent is not provisioned under the StDlci component. If a HibernationQueue is provisioned, the frame will be placed on the HibernationQueue at time of violation and transmission will be attempted later after the point at which the burst thresholds will no longer be exceeded. Setting all the CIR attributes to zero has the same affect as setting this attribute to disabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mscFrDteDynDlciDefsCommittedInformationRate 1.3.6.1.4.1.562.36.2.1.101.5.10.1.3
The average number of bits to be transferred per second over the DLCI to the DCE. When this attribute is set to zero, the link speed will be used instead.
OBJECT-TYPE    
  Unsigned32 0..48000000  

mscFrDteDynDlciDefsCommittedBurst 1.3.6.1.4.1.562.36.2.1.101.5.10.1.4
The committed burst size (in bits) to which the DLCI wants to subscribe.
OBJECT-TYPE    
  Unsigned32 0..2048000  

mscFrDteDynDlciDefsExcessBurst 1.3.6.1.4.1.562.36.2.1.101.5.10.1.5
The excess burst size (in bits) to which the DLCI wants to subscribe.
OBJECT-TYPE    
  Unsigned32 0..2048000  

mscFrDteDynDlciDefsExcessBurstAction 1.3.6.1.4.1.562.36.2.1.101.5.10.1.6
This attribute specifies the action taken when the committedBurst size has been exceeded on the DLCI but the excessBurst size has not. If the attribute is set to setDeBit, the Discard Eligibility bit in the Frame Relay header will be turned on. If the attribute is set to none, no action will be taken.
OBJECT-TYPE    
  INTEGER none(1), setDeBit(2)  

mscFrDteDynDlciDefsIpCos 1.3.6.1.4.1.562.36.2.1.101.5.10.1.7
This attribute specifies the initial Class of Service (CoS) given to each packet received on the virtual circuit identified by the DLCI. The CoS value n is used to select Vr/ QosP/n. which determines the QualityofService-Profile to be used when the packet is forwarded. The initial CoS given to a packet by the assignedQoS attribute may be overridden when the cosPolicyAssignment attribute is defined on the IpPort or Ip components. When a packet is to be transmitted on a frDte protocol port where multiple virtual circuits are available for the packet's next hop, the packet is forwarded using the dlci where the ipCos value matches the CoS of the packet. When the packets's CoS does not match the ipCos value of any of the available virtual circuits, the packet will be forwarded using next lowest CoS; failing this, the packet will be forwarded using the next highest CoS.
OBJECT-TYPE    
  Unsigned32 0..3  

mscFrDteStDlci 1.3.6.1.4.1.562.36.2.1.101.6
OBJECT IDENTIFIER    

mscFrDteStDlciRowStatusTable 1.3.6.1.4.1.562.36.2.1.101.6.1
This entry controls the addition and deletion of mscFrDteStDlci components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteStDlciRowStatusEntry

mscFrDteStDlciRowStatusEntry 1.3.6.1.4.1.562.36.2.1.101.6.1.1
A single entry in the table represents a single mscFrDteStDlci component.
OBJECT-TYPE    
  MscFrDteStDlciRowStatusEntry  

mscFrDteStDlciRowStatus 1.3.6.1.4.1.562.36.2.1.101.6.1.1.1
This variable is used as the basis for SNMP naming of mscFrDteStDlci components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscFrDteStDlciComponentName 1.3.6.1.4.1.562.36.2.1.101.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrDteStDlciStorageType 1.3.6.1.4.1.562.36.2.1.101.6.1.1.4
This variable represents the storage type value for the mscFrDteStDlci tables.
OBJECT-TYPE    
  StorageType  

mscFrDteStDlciIndex 1.3.6.1.4.1.562.36.2.1.101.6.1.1.10
This variable represents the index for the mscFrDteStDlci tables.
OBJECT-TYPE    
  Integer32 16..1007  

mscFrDteStDlciHq 1.3.6.1.4.1.562.36.2.1.101.6.2
OBJECT IDENTIFIER    

mscFrDteStDlciHqRowStatusTable 1.3.6.1.4.1.562.36.2.1.101.6.2.1
This entry controls the addition and deletion of mscFrDteStDlciHq components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteStDlciHqRowStatusEntry

mscFrDteStDlciHqRowStatusEntry 1.3.6.1.4.1.562.36.2.1.101.6.2.1.1
A single entry in the table represents a single mscFrDteStDlciHq component.
OBJECT-TYPE    
  MscFrDteStDlciHqRowStatusEntry  

mscFrDteStDlciHqRowStatus 1.3.6.1.4.1.562.36.2.1.101.6.2.1.1.1
This variable is used as the basis for SNMP naming of mscFrDteStDlciHq components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscFrDteStDlciHqComponentName 1.3.6.1.4.1.562.36.2.1.101.6.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrDteStDlciHqStorageType 1.3.6.1.4.1.562.36.2.1.101.6.2.1.1.4
This variable represents the storage type value for the mscFrDteStDlciHq tables.
OBJECT-TYPE    
  StorageType  

mscFrDteStDlciHqIndex 1.3.6.1.4.1.562.36.2.1.101.6.2.1.1.10
This variable represents the index for the mscFrDteStDlciHq tables.
OBJECT-TYPE    
  NonReplicated  

mscFrDteStDlciHqProvTable 1.3.6.1.4.1.562.36.2.1.101.6.2.10
This group contains the Link Emission Queue provisioned attributes.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteStDlciHqProvEntry

mscFrDteStDlciHqProvEntry 1.3.6.1.4.1.562.36.2.1.101.6.2.10.1
An entry in the mscFrDteStDlciHqProvTable.
OBJECT-TYPE    
  MscFrDteStDlciHqProvEntry  

mscFrDteStDlciHqMaxPackets 1.3.6.1.4.1.562.36.2.1.101.6.2.10.1.1
This attribute specifies the maximum number of packets allowed in the Leq before being discarded. If this attribute is set to zero then the maximum number of packets is calculated from the transmit data rate. This calculated value is placed in queuePktThreshold.
OBJECT-TYPE    
  Unsigned32 0..2048  

mscFrDteStDlciHqMaxMsecData 1.3.6.1.4.1.562.36.2.1.101.6.2.10.1.2
This attribute specifies the maximum number of 'Milliseconds worth of data' allowed in the Leq before packets are discarded. The queueByteThreshold will be calculated from this attribute, based on the transmit data rate.
OBJECT-TYPE    
  Unsigned32 100..60000  

mscFrDteStDlciHqMaxPercentMulticast 1.3.6.1.4.1.562.36.2.1.101.6.2.10.1.3
This attribute specifies the maximum percentage of multicast packets allowed in the Leq, based on queuePktThreshold, before being discarded. The calculated value will be placed in queueMulticastThreshold.
OBJECT-TYPE    
  Unsigned32 1..100  

mscFrDteStDlciHqTimeToLive 1.3.6.1.4.1.562.36.2.1.101.6.2.10.1.4
This attribute specifies the 'Milliseconds Time To Live' of packets in the Leq. If the timeToLive of a packet expires, it will be discarded.
OBJECT-TYPE    
  Unsigned32 100..60000  

mscFrDteStDlciHqStatsTable 1.3.6.1.4.1.562.36.2.1.101.6.2.11
This group contains HibernationQueue general statistics.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteStDlciHqStatsEntry

mscFrDteStDlciHqStatsEntry 1.3.6.1.4.1.562.36.2.1.101.6.2.11.1
An entry in the mscFrDteStDlciHqStatsTable.
OBJECT-TYPE    
  MscFrDteStDlciHqStatsEntry  

mscFrDteStDlciHqTimedOutPkt 1.3.6.1.4.1.562.36.2.1.101.6.2.11.1.1
This attribute counts the number of packets that have been discarded due to exceeding the timeToLive. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteStDlciHqQueuePurgeDiscards 1.3.6.1.4.1.562.36.2.1.101.6.2.11.1.2
This attribute counts the total number of packets discarded by a queue purge which occurs when the Dlci goes down. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteStDlciHqTStatsTable 1.3.6.1.4.1.562.36.2.1.101.6.2.12
This group contains Link Emission Queue total statistics.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteStDlciHqTStatsEntry

mscFrDteStDlciHqTStatsEntry 1.3.6.1.4.1.562.36.2.1.101.6.2.12.1
An entry in the mscFrDteStDlciHqTStatsTable.
OBJECT-TYPE    
  MscFrDteStDlciHqTStatsEntry  

mscFrDteStDlciHqTotalPktHandled 1.3.6.1.4.1.562.36.2.1.101.6.2.12.1.1
This attribute counts the total number of packets handled by the Leq. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteStDlciHqTotalPktForwarded 1.3.6.1.4.1.562.36.2.1.101.6.2.12.1.2
This attribute counts the total number of packets forwarded by the Leq. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteStDlciHqTotalPktQueued 1.3.6.1.4.1.562.36.2.1.101.6.2.12.1.3
This attribute counts the total number of packets that required queuing by the Leq due to transmit congestion. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteStDlciHqTotalMulticastPkt 1.3.6.1.4.1.562.36.2.1.101.6.2.12.1.4
This attribute counts the total number of multicast packets handled by this instance of FrDte. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteStDlciHqTotalPktDiscards 1.3.6.1.4.1.562.36.2.1.101.6.2.12.1.5
This attribute counts the total number of packets that were discarded for this instance of FrDte. This is the sum of timedOutPkt, forcedPktDiscards, queuePurgeDiscards, pktThresholdExceeded, byteThresholdExceeded, mulThresholdExceeded and memThresholdExceeded. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteStDlciHqCStatsTable 1.3.6.1.4.1.562.36.2.1.101.6.2.13
This group contains Link Emission Queue current statistics.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteStDlciHqCStatsEntry

mscFrDteStDlciHqCStatsEntry 1.3.6.1.4.1.562.36.2.1.101.6.2.13.1
An entry in the mscFrDteStDlciHqCStatsTable.
OBJECT-TYPE    
  MscFrDteStDlciHqCStatsEntry  

mscFrDteStDlciHqCurrentPktQueued 1.3.6.1.4.1.562.36.2.1.101.6.2.13.1.1
This attribute contains the current number of packets queued.
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscFrDteStDlciHqCurrentBytesQueued 1.3.6.1.4.1.562.36.2.1.101.6.2.13.1.2
This attribute contains the current number of bytes queued.
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscFrDteStDlciHqCurrentMulticastQueued 1.3.6.1.4.1.562.36.2.1.101.6.2.13.1.3
This attribute counts the current number of multicast packets in the queue.
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscFrDteStDlciHqThrStatsTable 1.3.6.1.4.1.562.36.2.1.101.6.2.14
This group contains Link Emission Queue threshold statistics.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteStDlciHqThrStatsEntry

mscFrDteStDlciHqThrStatsEntry 1.3.6.1.4.1.562.36.2.1.101.6.2.14.1
An entry in the mscFrDteStDlciHqThrStatsTable.
OBJECT-TYPE    
  MscFrDteStDlciHqThrStatsEntry  

mscFrDteStDlciHqQueuePktThreshold 1.3.6.1.4.1.562.36.2.1.101.6.2.14.1.1
This attribute is the maximum number of packets that can be contained in the queue before being discarded. If maxPackets was set to 0 then this attribute will contain the value that has been calculated based on the transmit data rate. If maxPackets was set to one or more than this attribute will contain that number.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrDteStDlciHqPktThresholdExceeded 1.3.6.1.4.1.562.36.2.1.101.6.2.14.1.2
This attribute counts the number of packets discarded due to the queuePktThreshold being exceeded. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteStDlciHqQueueByteThreshold 1.3.6.1.4.1.562.36.2.1.101.6.2.14.1.3
This attribute is the maximum number of bytes allowed in the queue based on maxMsecData and the transmit data rate.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrDteStDlciHqByteThresholdExceeded 1.3.6.1.4.1.562.36.2.1.101.6.2.14.1.4
This attribute counts the number of packets discarded due to the queueByteThreshold being exceeded. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteStDlciHqQueueMulticastThreshold 1.3.6.1.4.1.562.36.2.1.101.6.2.14.1.5
This attribute is the number of multicast packets allowed in the queue based on maxPercentMulticast and maxPackets.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrDteStDlciHqMulThresholdExceeded 1.3.6.1.4.1.562.36.2.1.101.6.2.14.1.6
This attribute counts the number of packets discarded due to the queueMulticastThreshold being exceeded. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteStDlciHqMemThresholdExceeded 1.3.6.1.4.1.562.36.2.1.101.6.2.14.1.7
This attribute counts the number of packets discarded due to exceeding the memory usage threshold for Leq. The memory usage threshold is determined by the Leq software, guaranteeing that the Leq does not consume all of the memory. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteStDlciProvTable 1.3.6.1.4.1.562.36.2.1.101.6.10
This group contains the provisioned attributes for a virtual circuit. These attributes represent the default settings for the resulting Dlci components and can be operationally changed using the corresponding attributes under the Dlci component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteStDlciProvEntry

mscFrDteStDlciProvEntry 1.3.6.1.4.1.562.36.2.1.101.6.10.1
An entry in the mscFrDteStDlciProvTable.
OBJECT-TYPE    
  MscFrDteStDlciProvEntry  

mscFrDteStDlciStdRowStatus 1.3.6.1.4.1.562.36.2.1.101.6.10.1.1
This attribute is used to manage the status of a StDlci component. Set to active to enable the StDlci component. Set to notInService to disable the StDlci component. Set to createAndGo (SNMP only) to create a new StDlci component. Set to destroy (SNMP only) to delete an existing StDlci component.
OBJECT-TYPE    
  INTEGER active(1), notInService(2)  

mscFrDteStDlciRateEnforcement 1.3.6.1.4.1.562.36.2.1.101.6.10.1.2
This attribute specifies whether the CIR attributes committedInformationRate, committedBurst, and excessBurst are used to define rate enforcement on this user DLCI. If rateEnforcement is enabled, and the combined Committed and Excess burst thresholds are exceeded, the frame in violation will be discarded immediately if a HibernationQueue subcomponent is not provisioned under the StDlci component. If a HibernationQueue is provisioned, the frame will be placed on the HibernationQueue at time of violation and transmission will be attempted later after the point at which the burst thresholds will no longer be exceeded. Setting all the CIR attributes to zero has the same affect as setting this attribute to disabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mscFrDteStDlciCommittedInformationRate 1.3.6.1.4.1.562.36.2.1.101.6.10.1.3
The average number of bits to be transferred per second over the DLCI to the DCE. When this attribute is set to zero, the link speed will be used instead.
OBJECT-TYPE    
  Unsigned32 0..48000000  

mscFrDteStDlciCommittedBurst 1.3.6.1.4.1.562.36.2.1.101.6.10.1.4
The committed burst size (in bits) to which the DLCI wants to subscribe.
OBJECT-TYPE    
  Unsigned32 0..2048000  

mscFrDteStDlciExcessBurst 1.3.6.1.4.1.562.36.2.1.101.6.10.1.5
The excess burst size (in bits) to which the DLCI wants to subscribe.
OBJECT-TYPE    
  Unsigned32 0..2048000  

mscFrDteStDlciExcessBurstAction 1.3.6.1.4.1.562.36.2.1.101.6.10.1.6
This attribute specifies the action taken when the committedBurst size has been exceeded on the DLCI but the excessBurst size has not. If the attribute is set to setDeBit, the Discard Eligibility bit in the Frame Relay header will be turned on. If the attribute is set to none, no action will be taken.
OBJECT-TYPE    
  INTEGER none(1), setDeBit(2)  

mscFrDteStDlciIpCos 1.3.6.1.4.1.562.36.2.1.101.6.10.1.7
This attribute specifies the initial Class of Service (CoS) given to each packet received on the virtual circuit identified by the DLCI. The CoS value n is used to select Vr/ QosP/n. which determines the QualityofService-Profile to be used when the packet is forwarded. The initial CoS given to a packet by the assignedQoS attribute may be overridden when the cosPolicyAssignment attribute is defined on the IpPort or Ip components. When a packet is to be transmitted on a frDte protocol port where multiple virtual circuits are available for the packet's next hop, the packet is forwarded using the dlci where the ipCos value matches the CoS of the packet. When the packets's CoS does not match the ipCos value of any of the available virtual circuits, the packet will be forwarded using next lowest CoS; failing this, the packet will be forwarded using the next highest CoS.
OBJECT-TYPE    
  Unsigned32 0..3  

mscFrDteStDlciRgLinkTable 1.3.6.1.4.1.562.36.2.1.101.6.11
This group provides the link between a Dlci and a remoteGroup.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteStDlciRgLinkEntry

mscFrDteStDlciRgLinkEntry 1.3.6.1.4.1.562.36.2.1.101.6.11.1
An entry in the mscFrDteStDlciRgLinkTable.
OBJECT-TYPE    
  MscFrDteStDlciRgLinkEntry  

mscFrDteStDlciLinkToRemoteGroup 1.3.6.1.4.1.562.36.2.1.101.6.11.1.1
This attribute associates a StDlci component with a Rg component. Provisioned StDlci components must be linked to a Rg component which is under the same FrDte component.
OBJECT-TYPE    
  Link  

mscFrDteLeq 1.3.6.1.4.1.562.36.2.1.101.7
OBJECT IDENTIFIER    

mscFrDteLeqRowStatusTable 1.3.6.1.4.1.562.36.2.1.101.7.1
This entry controls the addition and deletion of mscFrDteLeq components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteLeqRowStatusEntry

mscFrDteLeqRowStatusEntry 1.3.6.1.4.1.562.36.2.1.101.7.1.1
A single entry in the table represents a single mscFrDteLeq component.
OBJECT-TYPE    
  MscFrDteLeqRowStatusEntry  

mscFrDteLeqRowStatus 1.3.6.1.4.1.562.36.2.1.101.7.1.1.1
This variable is used as the basis for SNMP naming of mscFrDteLeq components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscFrDteLeqComponentName 1.3.6.1.4.1.562.36.2.1.101.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrDteLeqStorageType 1.3.6.1.4.1.562.36.2.1.101.7.1.1.4
This variable represents the storage type value for the mscFrDteLeq tables.
OBJECT-TYPE    
  StorageType  

mscFrDteLeqIndex 1.3.6.1.4.1.562.36.2.1.101.7.1.1.10
This variable represents the index for the mscFrDteLeq tables.
OBJECT-TYPE    
  NonReplicated  

mscFrDteLeqProvTable 1.3.6.1.4.1.562.36.2.1.101.7.10
This group contains the Link Emission Queue provisioned attributes.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteLeqProvEntry

mscFrDteLeqProvEntry 1.3.6.1.4.1.562.36.2.1.101.7.10.1
An entry in the mscFrDteLeqProvTable.
OBJECT-TYPE    
  MscFrDteLeqProvEntry  

mscFrDteLeqMaxPackets 1.3.6.1.4.1.562.36.2.1.101.7.10.1.1
This attribute specifies the maximum number of packets allowed in the Leq before being discarded. If this attribute is set to zero then the maximum number of packets is calculated from the transmit data rate. This calculated value is placed in queuePktThreshold.
OBJECT-TYPE    
  Unsigned32 0..2048  

mscFrDteLeqMaxMsecData 1.3.6.1.4.1.562.36.2.1.101.7.10.1.2
This attribute specifies the maximum number of 'Milliseconds worth of data' allowed in the Leq before packets are discarded. The queueByteThreshold will be calculated from this attribute, based on the transmit data rate.
OBJECT-TYPE    
  Unsigned32 100..60000  

mscFrDteLeqMaxPercentMulticast 1.3.6.1.4.1.562.36.2.1.101.7.10.1.3
This attribute specifies the maximum percentage of multicast packets allowed in the Leq, based on queuePktThreshold, before being discarded. The calculated value will be placed in queueMulticastThreshold.
OBJECT-TYPE    
  Unsigned32 1..100  

mscFrDteLeqTimeToLive 1.3.6.1.4.1.562.36.2.1.101.7.10.1.4
This attribute specifies the 'Milliseconds Time To Live' of packets in the Leq. If the timeToLive of a packet expires, it will be discarded.
OBJECT-TYPE    
  Unsigned32 100..60000  

mscFrDteLeqStatsTable 1.3.6.1.4.1.562.36.2.1.101.7.11
This group contains Link Emission Queue general statistics.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteLeqStatsEntry

mscFrDteLeqStatsEntry 1.3.6.1.4.1.562.36.2.1.101.7.11.1
An entry in the mscFrDteLeqStatsTable.
OBJECT-TYPE    
  MscFrDteLeqStatsEntry  

mscFrDteLeqTimedOutPkt 1.3.6.1.4.1.562.36.2.1.101.7.11.1.1
This attribute counts the number of packets that have been discarded due to exceeding the timeToLive. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteLeqHardwareForcedPkt 1.3.6.1.4.1.562.36.2.1.101.7.11.1.2
This attribute counts the number of hardware forced packets on this instance of FrDte. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteLeqForcedPktDiscards 1.3.6.1.4.1.562.36.2.1.101.7.11.1.3
This attribute counts the total number of hardware forced packets that had to be discarded due to link failure. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteLeqQueuePurgeDiscards 1.3.6.1.4.1.562.36.2.1.101.7.11.1.4
This attribute counts the total number of packets discarded by a queue purge (i.e. a discarding of all packets on the queue). This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteLeqTStatsTable 1.3.6.1.4.1.562.36.2.1.101.7.12
This group contains Link Emission Queue total statistics.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteLeqTStatsEntry

mscFrDteLeqTStatsEntry 1.3.6.1.4.1.562.36.2.1.101.7.12.1
An entry in the mscFrDteLeqTStatsTable.
OBJECT-TYPE    
  MscFrDteLeqTStatsEntry  

mscFrDteLeqTotalPktHandled 1.3.6.1.4.1.562.36.2.1.101.7.12.1.1
This attribute counts the total number of packets handled by the Leq. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteLeqTotalPktForwarded 1.3.6.1.4.1.562.36.2.1.101.7.12.1.2
This attribute counts the total number of packets forwarded by the Leq. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteLeqTotalPktQueued 1.3.6.1.4.1.562.36.2.1.101.7.12.1.3
This attribute counts the total number of packets that required queuing by the Leq due to transmit congestion. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteLeqTotalMulticastPkt 1.3.6.1.4.1.562.36.2.1.101.7.12.1.4
This attribute counts the total number of multicast packets handled by this instance of FrDte. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteLeqTotalPktDiscards 1.3.6.1.4.1.562.36.2.1.101.7.12.1.5
This attribute counts the total number of packets that were discarded for this instance of FrDte. This is the sum of timedOutPkt, forcedPktDiscards, queuePurgeDiscards, pktThresholdExceeded, byteThresholdExceeded, mulThresholdExceeded and memThresholdExceeded. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteLeqCStatsTable 1.3.6.1.4.1.562.36.2.1.101.7.13
This group contains Link Emission Queue current statistics.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteLeqCStatsEntry

mscFrDteLeqCStatsEntry 1.3.6.1.4.1.562.36.2.1.101.7.13.1
An entry in the mscFrDteLeqCStatsTable.
OBJECT-TYPE    
  MscFrDteLeqCStatsEntry  

mscFrDteLeqCurrentPktQueued 1.3.6.1.4.1.562.36.2.1.101.7.13.1.1
This attribute contains the current number of packets queued.
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscFrDteLeqCurrentBytesQueued 1.3.6.1.4.1.562.36.2.1.101.7.13.1.2
This attribute contains the current number of bytes queued.
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscFrDteLeqCurrentMulticastQueued 1.3.6.1.4.1.562.36.2.1.101.7.13.1.3
This attribute counts the current number of multicast packets in the queue.
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscFrDteLeqThrStatsTable 1.3.6.1.4.1.562.36.2.1.101.7.14
This group contains Link Emission Queue threshold statistics.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteLeqThrStatsEntry

mscFrDteLeqThrStatsEntry 1.3.6.1.4.1.562.36.2.1.101.7.14.1
An entry in the mscFrDteLeqThrStatsTable.
OBJECT-TYPE    
  MscFrDteLeqThrStatsEntry  

mscFrDteLeqQueuePktThreshold 1.3.6.1.4.1.562.36.2.1.101.7.14.1.1
This attribute is the maximum number of packets that can be contained in the queue before being discarded. If maxPackets was set to 0 then this attribute will contain the value that has been calculated based on the transmit data rate. If maxPackets was set to one or more than this attribute will contain that number.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrDteLeqPktThresholdExceeded 1.3.6.1.4.1.562.36.2.1.101.7.14.1.2
This attribute counts the number of packets discarded due to the queuePktThreshold being exceeded. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteLeqQueueByteThreshold 1.3.6.1.4.1.562.36.2.1.101.7.14.1.3
This attribute is the maximum number of bytes allowed in the queue based on maxMsecData and the transmit data rate.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrDteLeqByteThresholdExceeded 1.3.6.1.4.1.562.36.2.1.101.7.14.1.4
This attribute counts the number of packets discarded due to the queueByteThreshold being exceeded. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteLeqQueueMulticastThreshold 1.3.6.1.4.1.562.36.2.1.101.7.14.1.5
This attribute is the number of multicast packets allowed in the queue based on maxPercentMulticast and maxPackets.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrDteLeqMulThresholdExceeded 1.3.6.1.4.1.562.36.2.1.101.7.14.1.6
This attribute counts the number of packets discarded due to the queueMulticastThreshold being exceeded. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteLeqMemThresholdExceeded 1.3.6.1.4.1.562.36.2.1.101.7.14.1.7
This attribute counts the number of packets discarded due to exceeding the memory usage threshold for Leq. The memory usage threshold is determined by the Leq software, guaranteeing that the Leq does not consume all of the memory. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteDlci 1.3.6.1.4.1.562.36.2.1.101.8
OBJECT IDENTIFIER    

mscFrDteDlciRowStatusTable 1.3.6.1.4.1.562.36.2.1.101.8.1
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscFrDteDlci components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteDlciRowStatusEntry

mscFrDteDlciRowStatusEntry 1.3.6.1.4.1.562.36.2.1.101.8.1.1
A single entry in the table represents a single mscFrDteDlci component.
OBJECT-TYPE    
  MscFrDteDlciRowStatusEntry  

mscFrDteDlciRowStatus 1.3.6.1.4.1.562.36.2.1.101.8.1.1.1
This variable is used as the basis for SNMP naming of mscFrDteDlci components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscFrDteDlciComponentName 1.3.6.1.4.1.562.36.2.1.101.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrDteDlciStorageType 1.3.6.1.4.1.562.36.2.1.101.8.1.1.4
This variable represents the storage type value for the mscFrDteDlci tables.
OBJECT-TYPE    
  StorageType  

mscFrDteDlciIndex 1.3.6.1.4.1.562.36.2.1.101.8.1.1.10
This variable represents the index for the mscFrDteDlci tables.
OBJECT-TYPE    
  Integer32 0..1023  

mscFrDteDlciStateTable 1.3.6.1.4.1.562.36.2.1.101.8.10
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteDlciStateEntry

mscFrDteDlciStateEntry 1.3.6.1.4.1.562.36.2.1.101.8.10.1
An entry in the mscFrDteDlciStateTable.
OBJECT-TYPE    
  MscFrDteDlciStateEntry  

mscFrDteDlciAdminState 1.3.6.1.4.1.562.36.2.1.101.8.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscFrDteDlciOperationalState 1.3.6.1.4.1.562.36.2.1.101.8.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscFrDteDlciUsageState 1.3.6.1.4.1.562.36.2.1.101.8.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscFrDteDlciOperTable 1.3.6.1.4.1.562.36.2.1.101.8.11
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes for the Dlci component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteDlciOperEntry

mscFrDteDlciOperEntry 1.3.6.1.4.1.562.36.2.1.101.8.11.1
An entry in the mscFrDteDlciOperTable.
OBJECT-TYPE    
  MscFrDteDlciOperEntry  

mscFrDteDlciDlciState 1.3.6.1.4.1.562.36.2.1.101.8.11.1.4
This attribute reflects the current operational circuit state of the Dlci. The state active indicates that the circuit is up and inactive that the circuit is down. The state invalid means the circuit has been deleted by the DCE (via Lmi).
OBJECT-TYPE    
  INTEGER invalid(1), active(2), inactive(3)  

mscFrDteDlciLastTimeChange 1.3.6.1.4.1.562.36.2.1.101.8.11.1.5
The last time dlciState changed state.
OBJECT-TYPE    
  EnterpriseDateAndTime SIZE(0 | 19)  

mscFrDteDlciSentFrames 1.3.6.1.4.1.562.36.2.1.101.8.11.1.7
Number of frames transmitted across the interface. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteDlciSentOctets 1.3.6.1.4.1.562.36.2.1.101.8.11.1.8
The number of octets sent from this virtual circuit since it was created. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteDlciReceivedFrames 1.3.6.1.4.1.562.36.2.1.101.8.11.1.9
Number of frames received across the interface. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteDlciReceivedOctets 1.3.6.1.4.1.562.36.2.1.101.8.11.1.10
The number of octets sent from this virtual circuit since it was created. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteDlciReceivedFECNs 1.3.6.1.4.1.562.36.2.1.101.8.11.1.11
Number of frames with the FECN bit set received from the network. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteDlciReceivedBECNs 1.3.6.1.4.1.562.36.2.1.101.8.11.1.12
Number of frames with the BECN bit set received from the network. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteDlciDiscardedFrames 1.3.6.1.4.1.562.36.2.1.101.8.11.1.13
The number of inbound frames dropped because of format errors, or because the VC was inactive. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteDlciCreationType 1.3.6.1.4.1.562.36.2.1.101.8.11.1.14
This indicates whether the virtual circuit was manually created (static), or dynamically created (dynamic) via the data link control management interface.
OBJECT-TYPE    
  INTEGER static(1), dynamic(2)  

mscFrDteDlciCreationTime 1.3.6.1.4.1.562.36.2.1.101.8.11.1.15
The time when the circuit was created, whether by the Data Link Connection Management Interface or by an SNMP set request.
OBJECT-TYPE    
  EnterpriseDateAndTime SIZE(0 | 19)  

mscFrDteDlciRateEnforcement 1.3.6.1.4.1.562.36.2.1.101.8.11.1.17
This attribute specifies whether the CIR attributes committedInformationRate, committedBurst, and excessBurst are used to define rate enforcement on this user DLCI. If rateEnforcement is enabled, and the combined Committed and Excess burst thresholds are exceeded, the frame in violation will be discarded immediately if a HibernationQueue subcomponent is not provisioned under the StDlci component (static entries only). If a HibernationQueue is provisioned, the frame will be placed on the HibernationQueue at time of violation and transmission will be attempted later after the point at which the burst thresholds will no longer be exceeded. Setting all the CIR attributes to zero has the same affect as setting this attribute to disabled. Setting this attribute will operationally override the corresponding provisional value on static entries.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mscFrDteDlciCommittedInformationRate 1.3.6.1.4.1.562.36.2.1.101.8.11.1.18
The average number of bits to be transferred per second over the DLCI to the DCE. When this attribute is set to zero, the link speed will be used instead. Setting this attribute will operationally override the corresponding provisional value on static entries.
OBJECT-TYPE    
  Gauge32 0..48000000  

mscFrDteDlciCommittedBurst 1.3.6.1.4.1.562.36.2.1.101.8.11.1.19
The committed burst size (in bits) to which the DLCI wants to subscribe. Setting this attribute will operationally override the corresponding provisional value on static entries.
OBJECT-TYPE    
  Unsigned32 0..2048000  

mscFrDteDlciExcessBurst 1.3.6.1.4.1.562.36.2.1.101.8.11.1.20
The excess burst size (in bits) to which the DLCI wants to subscribe. Setting this attribute will operationally override the corresponding provisional value on static entries.
OBJECT-TYPE    
  Unsigned32 0..2048000  

mscFrDteDlciExcessBurstAction 1.3.6.1.4.1.562.36.2.1.101.8.11.1.21
This attribute specifies the action taken when the committedBurst size has been exceeded on the Dlci but the excessBurst size has not. If the attribute is set to setDeBit, the Discard Eligibility bit in the Frame Relay header will be turned on. If the attribute is set to none, no action will be taken. Setting this attribute will operationally override the corresponding provisional value on static entries.
OBJECT-TYPE    
  INTEGER none(1), setDeBit(2)  

mscFrDteVFramer 1.3.6.1.4.1.562.36.2.1.101.9
OBJECT IDENTIFIER    

mscFrDteVFramerRowStatusTable 1.3.6.1.4.1.562.36.2.1.101.9.1
This entry controls the addition and deletion of mscFrDteVFramer components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteVFramerRowStatusEntry

mscFrDteVFramerRowStatusEntry 1.3.6.1.4.1.562.36.2.1.101.9.1.1
A single entry in the table represents a single mscFrDteVFramer component.
OBJECT-TYPE    
  MscFrDteVFramerRowStatusEntry  

mscFrDteVFramerRowStatus 1.3.6.1.4.1.562.36.2.1.101.9.1.1.1
This variable is used as the basis for SNMP naming of mscFrDteVFramer components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscFrDteVFramerComponentName 1.3.6.1.4.1.562.36.2.1.101.9.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrDteVFramerStorageType 1.3.6.1.4.1.562.36.2.1.101.9.1.1.4
This variable represents the storage type value for the mscFrDteVFramer tables.
OBJECT-TYPE    
  StorageType  

mscFrDteVFramerIndex 1.3.6.1.4.1.562.36.2.1.101.9.1.1.10
This variable represents the index for the mscFrDteVFramer tables.
OBJECT-TYPE    
  NonReplicated  

mscFrDteVFramerProvTable 1.3.6.1.4.1.562.36.2.1.101.9.10
This group contains provisionable attributes for the VirtualFramer component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteVFramerProvEntry

mscFrDteVFramerProvEntry 1.3.6.1.4.1.562.36.2.1.101.9.10.1
An entry in the mscFrDteVFramerProvTable.
OBJECT-TYPE    
  MscFrDteVFramerProvEntry  

mscFrDteVFramerOtherVirtualFramer 1.3.6.1.4.1.562.36.2.1.101.9.10.1.1
This attribute specifies the other VirtualFramer to which the service is linked, for example, FrUni/n VirtualFramer, FrDte/n VirtualFramer.
OBJECT-TYPE    
  Link  

mscFrDteVFramerLogicalProcessor 1.3.6.1.4.1.562.36.2.1.101.9.10.1.2
This attribute specifies the logical processor on which the service component will reside.
OBJECT-TYPE    
  Link  

mscFrDteVFramerStateTable 1.3.6.1.4.1.562.36.2.1.101.9.11
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteVFramerStateEntry

mscFrDteVFramerStateEntry 1.3.6.1.4.1.562.36.2.1.101.9.11.1
An entry in the mscFrDteVFramerStateTable.
OBJECT-TYPE    
  MscFrDteVFramerStateEntry  

mscFrDteVFramerAdminState 1.3.6.1.4.1.562.36.2.1.101.9.11.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscFrDteVFramerOperationalState 1.3.6.1.4.1.562.36.2.1.101.9.11.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscFrDteVFramerUsageState 1.3.6.1.4.1.562.36.2.1.101.9.11.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscFrDteVFramerStatsTable 1.3.6.1.4.1.562.36.2.1.101.9.12
This group contains the operational statistics data for a VirtualFramer component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteVFramerStatsEntry

mscFrDteVFramerStatsEntry 1.3.6.1.4.1.562.36.2.1.101.9.12.1
An entry in the mscFrDteVFramerStatsTable.
OBJECT-TYPE    
  MscFrDteVFramerStatsEntry  

mscFrDteVFramerFrmToOtherVFramer 1.3.6.1.4.1.562.36.2.1.101.9.12.1.2
This attribute counts the frames transmitted to the otherVirtualFramer.
OBJECT-TYPE    
  PassportCounter64  

mscFrDteVFramerFrmFromOtherVFramer 1.3.6.1.4.1.562.36.2.1.101.9.12.1.3
This attribute counts the frames received from the otherVirtualFramer.
OBJECT-TYPE    
  PassportCounter64  

mscFrDteVFramerOctetFromOtherVFramer 1.3.6.1.4.1.562.36.2.1.101.9.12.1.5
This attribute counts the octets received from the otherVirtualFramer.
OBJECT-TYPE    
  PassportCounter64  

mscFrDteCidDataTable 1.3.6.1.4.1.562.36.2.1.101.20
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteCidDataEntry

mscFrDteCidDataEntry 1.3.6.1.4.1.562.36.2.1.101.20.1
An entry in the mscFrDteCidDataTable.
OBJECT-TYPE    
  MscFrDteCidDataEntry  

mscFrDteCustomerIdentifier 1.3.6.1.4.1.562.36.2.1.101.20.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

mscFrDteIfEntryTable 1.3.6.1.4.1.562.36.2.1.101.21
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteIfEntryEntry

mscFrDteIfEntryEntry 1.3.6.1.4.1.562.36.2.1.101.21.1
An entry in the mscFrDteIfEntryTable.
OBJECT-TYPE    
  MscFrDteIfEntryEntry  

mscFrDteIfAdminStatus 1.3.6.1.4.1.562.36.2.1.101.21.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscFrDteIfIndex 1.3.6.1.4.1.562.36.2.1.101.21.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscFrDteProvTable 1.3.6.1.4.1.562.36.2.1.101.22
This group contains the provisioned attributes for the FrDte component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteProvEntry

mscFrDteProvEntry 1.3.6.1.4.1.562.36.2.1.101.22.1
An entry in the mscFrDteProvTable.
OBJECT-TYPE    
  MscFrDteProvEntry  

mscFrDteAcceptUndefinedDlci 1.3.6.1.4.1.562.36.2.1.101.22.1.1
This parameter allows previously undefined Data Link Connection Identifiers (DLCIs) to be dynamically accepted in the default remote group. If set to enabled, undefined DLCIs will be accepted, if disabled, they will not.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mscFrDteStateTable 1.3.6.1.4.1.562.36.2.1.101.23
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteStateEntry

mscFrDteStateEntry 1.3.6.1.4.1.562.36.2.1.101.23.1
An entry in the mscFrDteStateTable.
OBJECT-TYPE    
  MscFrDteStateEntry  

mscFrDteAdminState 1.3.6.1.4.1.562.36.2.1.101.23.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscFrDteOperationalState 1.3.6.1.4.1.562.36.2.1.101.23.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscFrDteUsageState 1.3.6.1.4.1.562.36.2.1.101.23.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscFrDteOperStatusTable 1.3.6.1.4.1.562.36.2.1.101.24
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteOperStatusEntry

mscFrDteOperStatusEntry 1.3.6.1.4.1.562.36.2.1.101.24.1
An entry in the mscFrDteOperStatusTable.
OBJECT-TYPE    
  MscFrDteOperStatusEntry  

mscFrDteSnmpOperStatus 1.3.6.1.4.1.562.36.2.1.101.24.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscFrDteOperTable 1.3.6.1.4.1.562.36.2.1.101.25
This group contains the operational attributes for the FrDte component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteOperEntry

mscFrDteOperEntry 1.3.6.1.4.1.562.36.2.1.101.25.1
An entry in the mscFrDteOperTable.
OBJECT-TYPE    
  MscFrDteOperEntry  

mscFrDteLinkOperState 1.3.6.1.4.1.562.36.2.1.101.25.1.1
This attribute describes the operational state of the Link Control protocol. If the interface to the physical link hardware is inactive, the linkOperState is in the down state. The polling state only occurs when the Local Management Interface (LMI) is enabled and the physical link is active. The polling state indicates LMI is polling for its peer. Once communication is established the linkOperState will transition to the active state. If the procedure attribute of the Lmi component is set to none, linkOperState will transition to the active state once the physical link becomes active.
OBJECT-TYPE    
  INTEGER active(1), down(2), polling(3)  

mscFrDteErrTable 1.3.6.1.4.1.562.36.2.1.101.26
This group contains the SNMP frErrEntry attributes for the FrDte component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteErrEntry

mscFrDteErrEntry 1.3.6.1.4.1.562.36.2.1.101.26.1
An entry in the mscFrDteErrTable.
OBJECT-TYPE    
  MscFrDteErrEntry  

mscFrDteErrType 1.3.6.1.4.1.562.36.2.1.101.26.1.2
The type of error that was last seen on this interface. The error types are as follows: receiveShort: This error indicates a received frame was discarded because it was less than four octets long or it was missing the Organizationally Unique Identifier (OUI) for a SNAP header. receiveLong: This error indicates a received frame was discarded because it was longer than expected. This error is currently not used on this interface. illegalDlci: This error indicates that a received frame was discarded because it's Q.922 address was not two octets in length. This error could also indicate that a frame was discarded because it was received on a DLCI reserved for LMI which had not been provisioned active. dlcmiProtoErr: This error indicates an LMI frame was received with contents formatted incorrectly. dlcmiUnknownIe: This error indicates that an LMI frame was received which contained an unsupported Information Element (IE) type dlcmiSequenceErr: This error indicates that an LMI frame was received whose Keep Alive Sequence was incorrect. dlcmiUnknownRpt: This error indicates that an LMI frame was received which contained a Report-type Information Element with an invalid type of report. noErrorSinceReset: This error type indicates that there has not been an error since the interface has been reset. unknownError: This error type contains the cumulation of receive frame errors that did not fit one of the MIB error descriptions above. These errors include those counted by the following attributes: ulpUnknownProtocol - A received frame was discarded because the Upper Level Protocol (ULP) encapsulation used was unsupported. badFc - A received frame was discarded because the frame control character was incorrect. defragSequenceErrors - A fragment was received which was discarded due to an out of sequence error detection.
OBJECT-TYPE    
  INTEGER unknownError(1), receiveShort(2), receiveLong(3), illegalDlci(4), dlcmiProtoErr(5), dlcmiUnknownIe(6), dlcmiSequenceErr(7), dlcmiUnknownRpt(8), noErrorSinceReset(9)  

mscFrDteErrData 1.3.6.1.4.1.562.36.2.1.101.26.1.3
An octet string containing the first part of the frame in which an error was last detected.
OBJECT-TYPE    
  HexString SIZE(64)  

mscFrDteErrTime 1.3.6.1.4.1.562.36.2.1.101.26.1.4
The time at which the last error was detected and recorded in errType.
OBJECT-TYPE    
  EnterpriseDateAndTime SIZE(0 | 19)  

mscFrDteErrDiscards 1.3.6.1.4.1.562.36.2.1.101.26.1.6
Number of inbound frames dropped because of format errors or because the virtual circuit was not known. Format errors, in this case, are any errors which would prevent the system from recognizing the DLCI and placing the error in the discard category. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteErrFaults 1.3.6.1.4.1.562.36.2.1.101.26.1.7
This attribute counts the number of times LMI has taken down the interface. When the procedure attribute of the Lmi component is set to none, this counter will not be incremented. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteErrFaultTime 1.3.6.1.4.1.562.36.2.1.101.26.1.8
The last time the errFaults counter was incremented.
OBJECT-TYPE    
  EnterpriseDateAndTime SIZE(0 | 19)  

mscFrDteErrStatsTable 1.3.6.1.4.1.562.36.2.1.101.27
This group contains error counters for the FrDte.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrDteErrStatsEntry

mscFrDteErrStatsEntry 1.3.6.1.4.1.562.36.2.1.101.27.1
An entry in the mscFrDteErrStatsTable.
OBJECT-TYPE    
  MscFrDteErrStatsEntry  

mscFrDteXmitDiscardPvcDown 1.3.6.1.4.1.562.36.2.1.101.27.1.1
Count of transmitted frames discarded because the Dlci or a component positioned in a hierarchically fashion above it (e.g. it's remote group or the FrDte component) was administratively disabled. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteXmitDiscardLmiInactive 1.3.6.1.4.1.562.36.2.1.101.27.1.2
Count of transmitted frames discarded because the Local Management Interface (LMI) was not yet active (i.e. LMI was still in the polling state). This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteXmitDiscardFramerDown 1.3.6.1.4.1.562.36.2.1.101.27.1.3
Count of transmitted frames discarded because the framer component was down. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteXmitDiscardPvcInactive 1.3.6.1.4.1.562.36.2.1.101.27.1.4
Count of transmitted frames discarded because the Local Management Interface (LMI) had inactivated or invalidated the Dlci. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteXmitDiscardCirExceeded 1.3.6.1.4.1.562.36.2.1.101.27.1.5
Count of transmitted frames discarded because CIR was enabled on a Dlci without a HibernationQueue subcomponent and the traffic exceeded the combined Committed and Excess Burst thresholds. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteRecvDiscardPvcDown 1.3.6.1.4.1.562.36.2.1.101.27.1.6
Count of received frames discarded because the Dlci or a component positioned in a hierarchically fashion above it (e.g. it's remote group or the FrDte component) was administratively disabled. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteRecvDiscardLmiInactive 1.3.6.1.4.1.562.36.2.1.101.27.1.7
Count of received frames discarded because the Local Management Interface (LMI) was not yet active (i.e. LMI was still in the polling state). This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteRecvDiscardPvcInactive 1.3.6.1.4.1.562.36.2.1.101.27.1.8
Count of received frames discarded because the Local Management Interface (LMI) had inactivated or invalidated the Dlci. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteBadFc 1.3.6.1.4.1.562.36.2.1.101.27.1.9
Count of received frames discarded because the frame control character was incorrect. This may indicate that the other side of the link is configured for a different link level protocol. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteUlpUnknownProtocol 1.3.6.1.4.1.562.36.2.1.101.27.1.10
Count of received frames discarded because the Upper Level Protocol (ULP) encapsulation used was unsupported. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteDefragSequenceErrors 1.3.6.1.4.1.562.36.2.1.101.27.1.11
Count of fragments received which were discarded due to out of sequence error detection. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteReceiveShort 1.3.6.1.4.1.562.36.2.1.101.27.1.12
Count of received frames (including LMI frames) discarded because they were less than four octets long or they were missing the Organizationally Unique Identifier (OUI) for a SNAP header. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteIllegalDlci 1.3.6.1.4.1.562.36.2.1.101.27.1.13
Count of received frames discarded because their Q.922 address was not two octets in length. This count also includes frames discarded because they were received on a Dlci reserved for LMI which had not been provisioned active. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteDlcmiProtoErr 1.3.6.1.4.1.562.36.2.1.101.27.1.14
Count of received LMI frames whose contents were formatted incorrectly. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteDlcmiUnknownIe 1.3.6.1.4.1.562.36.2.1.101.27.1.15
Count of received LMI frames which contained an unsupported Information Element (IE) type. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteDlcmiSequenceErr 1.3.6.1.4.1.562.36.2.1.101.27.1.16
Count of received LMI frames whose Keep Alive Sequence was incorrect. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

mscFrDteDlcmiUnknownRpt 1.3.6.1.4.1.562.36.2.1.101.27.1.17
Count of received LMI frames which contained a Report-type Information Element with an invalid type of report. This counter will wrap around to 0 when it exceeds its maximum count.
OBJECT-TYPE    
  Counter32  

frameRelayDteMIB 1.3.6.1.4.1.562.36.2.2.32
OBJECT IDENTIFIER    

frameRelayDteGroup 1.3.6.1.4.1.562.36.2.2.32.1
OBJECT IDENTIFIER    

frameRelayDteGroupCA 1.3.6.1.4.1.562.36.2.2.32.1.1
OBJECT IDENTIFIER    

frameRelayDteGroupCA02 1.3.6.1.4.1.562.36.2.2.32.1.1.3
OBJECT IDENTIFIER    

frameRelayDteGroupCA02A 1.3.6.1.4.1.562.36.2.2.32.1.1.3.2
OBJECT IDENTIFIER    

frameRelayDteCapabilities 1.3.6.1.4.1.562.36.2.2.32.3
OBJECT IDENTIFIER    

frameRelayDteCapabilitiesCA 1.3.6.1.4.1.562.36.2.2.32.3.1
OBJECT IDENTIFIER    

frameRelayDteCapabilitiesCA02 1.3.6.1.4.1.562.36.2.2.32.3.1.3
OBJECT IDENTIFIER    

frameRelayDteCapabilitiesCA02A 1.3.6.1.4.1.562.36.2.2.32.3.1.3.2
OBJECT IDENTIFIER    

Defined Objects

MscFrDteRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrDteRowStatus  
  DisplayString as mscFrDteComponentName  
  StorageType as mscFrDteStorageType  
  Integer32 as mscFrDteIndex  

MscFrDteCidDataEntry  
SEQUENCE    
  Unsigned32 as mscFrDteCustomerIdentifier  

MscFrDteIfEntryEntry  
SEQUENCE    
  INTEGER as mscFrDteIfAdminStatus  
  InterfaceIndex as mscFrDteIfIndex  

MscFrDteProvEntry  
SEQUENCE    
  INTEGER as mscFrDteAcceptUndefinedDlci  

MscFrDteStateEntry  
SEQUENCE    
  INTEGER as mscFrDteAdminState  
  INTEGER as mscFrDteOperationalState  
  INTEGER as mscFrDteUsageState  

MscFrDteOperStatusEntry  
SEQUENCE    
  INTEGER as mscFrDteSnmpOperStatus  

MscFrDteOperEntry  
SEQUENCE    
  INTEGER as mscFrDteLinkOperState  

MscFrDteErrEntry  
SEQUENCE    
  INTEGER as mscFrDteErrType  
  HexString as mscFrDteErrData  
  EnterpriseDateAndTime as mscFrDteErrTime  
  Counter32 as mscFrDteErrDiscards  
  Counter32 as mscFrDteErrFaults  
  EnterpriseDateAndTime as mscFrDteErrFaultTime  

MscFrDteErrStatsEntry  
SEQUENCE    
  Counter32 as mscFrDteXmitDiscardPvcDown  
  Counter32 as mscFrDteXmitDiscardLmiInactive  
  Counter32 as mscFrDteXmitDiscardFramerDown  
  Counter32 as mscFrDteXmitDiscardPvcInactive  
  Counter32 as mscFrDteXmitDiscardCirExceeded  
  Counter32 as mscFrDteRecvDiscardPvcDown  
  Counter32 as mscFrDteRecvDiscardLmiInactive  
  Counter32 as mscFrDteRecvDiscardPvcInactive  
  Counter32 as mscFrDteBadFc  
  Counter32 as mscFrDteUlpUnknownProtocol  
  Counter32 as mscFrDteDefragSequenceErrors  
  Counter32 as mscFrDteReceiveShort  
  Counter32 as mscFrDteIllegalDlci  
  Counter32 as mscFrDteDlcmiProtoErr  
  Counter32 as mscFrDteDlcmiUnknownIe  
  Counter32 as mscFrDteDlcmiSequenceErr  
  Counter32 as mscFrDteDlcmiUnknownRpt  

MscFrDteFramerRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrDteFramerRowStatus  
  DisplayString as mscFrDteFramerComponentName  
  StorageType as mscFrDteFramerStorageType  
  NonReplicated as mscFrDteFramerIndex  

MscFrDteFramerProvEntry  
SEQUENCE    
  Link as mscFrDteFramerInterfaceName  

MscFrDteFramerStateEntry  
SEQUENCE    
  INTEGER as mscFrDteFramerAdminState  
  INTEGER as mscFrDteFramerOperationalState  
  INTEGER as mscFrDteFramerUsageState  

MscFrDteFramerStatsEntry  
SEQUENCE    
  Counter32 as mscFrDteFramerFrmToIf  
  Counter32 as mscFrDteFramerFrmFromIf  
  Counter32 as mscFrDteFramerAborts  
  Counter32 as mscFrDteFramerCrcErrors  
  Counter32 as mscFrDteFramerLrcErrors  
  Counter32 as mscFrDteFramerNonOctetErrors  
  Counter32 as mscFrDteFramerOverruns  
  Counter32 as mscFrDteFramerUnderruns  
  Counter32 as mscFrDteFramerLargeFrmErrors  

MscFrDteFramerUtilEntry  
SEQUENCE    
  Gauge32 as mscFrDteFramerNormPrioLinkUtilToIf  
  Gauge32 as mscFrDteFramerNormPrioLinkUtilFromIf  

MscFrDteLmiRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrDteLmiRowStatus  
  DisplayString as mscFrDteLmiComponentName  
  StorageType as mscFrDteLmiStorageType  
  NonReplicated as mscFrDteLmiIndex  

MscFrDteLmiProvEntry  
SEQUENCE    
  INTEGER as mscFrDteLmiProcedures  
  Unsigned32 as mscFrDteLmiPollingInterval  
  Unsigned32 as mscFrDteLmiFullEnquiryInterval  
  Unsigned32 as mscFrDteLmiErrorThreshold  
  Unsigned32 as mscFrDteLmiMonitoredEvents  

MscFrDteLmiOperEntry  
SEQUENCE    
  INTEGER as mscFrDteLmiLmiStatus  

MscFrDteRgRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrDteRgRowStatus  
  DisplayString as mscFrDteRgComponentName  
  StorageType as mscFrDteRgStorageType  
  Integer32 as mscFrDteRgIndex  

MscFrDteRgIfEntryEntry  
SEQUENCE    
  INTEGER as mscFrDteRgIfAdminStatus  
  InterfaceIndex as mscFrDteRgIfIndex  

MscFrDteRgProvEntry  
SEQUENCE    
  Unsigned32 as mscFrDteRgMaxTransmissionUnit  

MscFrDteRgMpEntry  
SEQUENCE    
  Link as mscFrDteRgLinkToProtocolPort  

MscFrDteRgStateEntry  
SEQUENCE    
  INTEGER as mscFrDteRgAdminState  
  INTEGER as mscFrDteRgOperationalState  
  INTEGER as mscFrDteRgUsageState  

MscFrDteRgOperStatusEntry  
SEQUENCE    
  INTEGER as mscFrDteRgSnmpOperStatus  

MscFrDteRgLtDlciEntry  
SEQUENCE    
  Link as mscFrDteRgLtDlciValue  
  RowStatus as mscFrDteRgLtDlciRowStatus  

MscFrDteRgBfrRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrDteRgBfrRowStatus  
  DisplayString as mscFrDteRgBfrComponentName  
  StorageType as mscFrDteRgBfrStorageType  
  NonReplicated as mscFrDteRgBfrIndex  

MscFrDteRgBfrProvEntry  
SEQUENCE    
  INTEGER as mscFrDteRgBfrMacType  
  INTEGER as mscFrDteRgBfrBfrIndex  

MscFrDteRgBfrOprEntry  
SEQUENCE    
  DashedHexString as mscFrDteRgBfrMacAddr  

MscFrDteDynDlciDefsRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrDteDynDlciDefsRowStatus  
  DisplayString as mscFrDteDynDlciDefsComponentName  
  StorageType as mscFrDteDynDlciDefsStorageType  
  NonReplicated as mscFrDteDynDlciDefsIndex  

MscFrDteDynDlciDefsProvEntry  
SEQUENCE    
  INTEGER as mscFrDteDynDlciDefsStdRowStatus  
  INTEGER as mscFrDteDynDlciDefsRateEnforcement  
  Unsigned32 as mscFrDteDynDlciDefsCommittedInformationRate  
  Unsigned32 as mscFrDteDynDlciDefsCommittedBurst  
  Unsigned32 as mscFrDteDynDlciDefsExcessBurst  
  INTEGER as mscFrDteDynDlciDefsExcessBurstAction  
  Unsigned32 as mscFrDteDynDlciDefsIpCos  

MscFrDteStDlciRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrDteStDlciRowStatus  
  DisplayString as mscFrDteStDlciComponentName  
  StorageType as mscFrDteStDlciStorageType  
  Integer32 as mscFrDteStDlciIndex  

MscFrDteStDlciProvEntry  
SEQUENCE    
  INTEGER as mscFrDteStDlciStdRowStatus  
  INTEGER as mscFrDteStDlciRateEnforcement  
  Unsigned32 as mscFrDteStDlciCommittedInformationRate  
  Unsigned32 as mscFrDteStDlciCommittedBurst  
  Unsigned32 as mscFrDteStDlciExcessBurst  
  INTEGER as mscFrDteStDlciExcessBurstAction  
  Unsigned32 as mscFrDteStDlciIpCos  

MscFrDteStDlciRgLinkEntry  
SEQUENCE    
  Link as mscFrDteStDlciLinkToRemoteGroup  

MscFrDteStDlciHqRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrDteStDlciHqRowStatus  
  DisplayString as mscFrDteStDlciHqComponentName  
  StorageType as mscFrDteStDlciHqStorageType  
  NonReplicated as mscFrDteStDlciHqIndex  

MscFrDteStDlciHqProvEntry  
SEQUENCE    
  Unsigned32 as mscFrDteStDlciHqMaxPackets  
  Unsigned32 as mscFrDteStDlciHqMaxMsecData  
  Unsigned32 as mscFrDteStDlciHqMaxPercentMulticast  
  Unsigned32 as mscFrDteStDlciHqTimeToLive  

MscFrDteStDlciHqStatsEntry  
SEQUENCE    
  Counter32 as mscFrDteStDlciHqTimedOutPkt  
  Counter32 as mscFrDteStDlciHqQueuePurgeDiscards  

MscFrDteStDlciHqTStatsEntry  
SEQUENCE    
  Counter32 as mscFrDteStDlciHqTotalPktHandled  
  Counter32 as mscFrDteStDlciHqTotalPktForwarded  
  Counter32 as mscFrDteStDlciHqTotalPktQueued  
  Counter32 as mscFrDteStDlciHqTotalMulticastPkt  
  Counter32 as mscFrDteStDlciHqTotalPktDiscards  

MscFrDteStDlciHqCStatsEntry  
SEQUENCE    
  Gauge32 as mscFrDteStDlciHqCurrentPktQueued  
  Gauge32 as mscFrDteStDlciHqCurrentBytesQueued  
  Gauge32 as mscFrDteStDlciHqCurrentMulticastQueued  

MscFrDteStDlciHqThrStatsEntry  
SEQUENCE    
  Unsigned32 as mscFrDteStDlciHqQueuePktThreshold  
  Counter32 as mscFrDteStDlciHqPktThresholdExceeded  
  Unsigned32 as mscFrDteStDlciHqQueueByteThreshold  
  Counter32 as mscFrDteStDlciHqByteThresholdExceeded  
  Unsigned32 as mscFrDteStDlciHqQueueMulticastThreshold  
  Counter32 as mscFrDteStDlciHqMulThresholdExceeded  
  Counter32 as mscFrDteStDlciHqMemThresholdExceeded  

MscFrDteLeqRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrDteLeqRowStatus  
  DisplayString as mscFrDteLeqComponentName  
  StorageType as mscFrDteLeqStorageType  
  NonReplicated as mscFrDteLeqIndex  

MscFrDteLeqProvEntry  
SEQUENCE    
  Unsigned32 as mscFrDteLeqMaxPackets  
  Unsigned32 as mscFrDteLeqMaxMsecData  
  Unsigned32 as mscFrDteLeqMaxPercentMulticast  
  Unsigned32 as mscFrDteLeqTimeToLive  

MscFrDteLeqStatsEntry  
SEQUENCE    
  Counter32 as mscFrDteLeqTimedOutPkt  
  Counter32 as mscFrDteLeqHardwareForcedPkt  
  Counter32 as mscFrDteLeqForcedPktDiscards  
  Counter32 as mscFrDteLeqQueuePurgeDiscards  

MscFrDteLeqTStatsEntry  
SEQUENCE    
  Counter32 as mscFrDteLeqTotalPktHandled  
  Counter32 as mscFrDteLeqTotalPktForwarded  
  Counter32 as mscFrDteLeqTotalPktQueued  
  Counter32 as mscFrDteLeqTotalMulticastPkt  
  Counter32 as mscFrDteLeqTotalPktDiscards  

MscFrDteLeqCStatsEntry  
SEQUENCE    
  Gauge32 as mscFrDteLeqCurrentPktQueued  
  Gauge32 as mscFrDteLeqCurrentBytesQueued  
  Gauge32 as mscFrDteLeqCurrentMulticastQueued  

MscFrDteLeqThrStatsEntry  
SEQUENCE    
  Unsigned32 as mscFrDteLeqQueuePktThreshold  
  Counter32 as mscFrDteLeqPktThresholdExceeded  
  Unsigned32 as mscFrDteLeqQueueByteThreshold  
  Counter32 as mscFrDteLeqByteThresholdExceeded  
  Unsigned32 as mscFrDteLeqQueueMulticastThreshold  
  Counter32 as mscFrDteLeqMulThresholdExceeded  
  Counter32 as mscFrDteLeqMemThresholdExceeded  

MscFrDteDlciRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrDteDlciRowStatus  
  DisplayString as mscFrDteDlciComponentName  
  StorageType as mscFrDteDlciStorageType  
  Integer32 as mscFrDteDlciIndex  

MscFrDteDlciStateEntry  
SEQUENCE    
  INTEGER as mscFrDteDlciAdminState  
  INTEGER as mscFrDteDlciOperationalState  
  INTEGER as mscFrDteDlciUsageState  

MscFrDteDlciOperEntry  
SEQUENCE    
  INTEGER as mscFrDteDlciDlciState  
  EnterpriseDateAndTime as mscFrDteDlciLastTimeChange  
  Counter32 as mscFrDteDlciSentFrames  
  Counter32 as mscFrDteDlciSentOctets  
  Counter32 as mscFrDteDlciReceivedFrames  
  Counter32 as mscFrDteDlciReceivedOctets  
  Counter32 as mscFrDteDlciReceivedFECNs  
  Counter32 as mscFrDteDlciReceivedBECNs  
  Counter32 as mscFrDteDlciDiscardedFrames  
  INTEGER as mscFrDteDlciCreationType  
  EnterpriseDateAndTime as mscFrDteDlciCreationTime  
  INTEGER as mscFrDteDlciRateEnforcement  
  Gauge32 as mscFrDteDlciCommittedInformationRate  
  Unsigned32 as mscFrDteDlciCommittedBurst  
  Unsigned32 as mscFrDteDlciExcessBurst  
  INTEGER as mscFrDteDlciExcessBurstAction  

MscFrDteVFramerRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrDteVFramerRowStatus  
  DisplayString as mscFrDteVFramerComponentName  
  StorageType as mscFrDteVFramerStorageType  
  NonReplicated as mscFrDteVFramerIndex  

MscFrDteVFramerProvEntry  
SEQUENCE    
  Link as mscFrDteVFramerOtherVirtualFramer  
  Link as mscFrDteVFramerLogicalProcessor  

MscFrDteVFramerStateEntry  
SEQUENCE    
  INTEGER as mscFrDteVFramerAdminState  
  INTEGER as mscFrDteVFramerOperationalState  
  INTEGER as mscFrDteVFramerUsageState  

MscFrDteVFramerStatsEntry  
SEQUENCE    
  PassportCounter64 as mscFrDteVFramerFrmToOtherVFramer  
  PassportCounter64 as mscFrDteVFramerFrmFromOtherVFramer  
  PassportCounter64 as mscFrDteVFramerOctetFromOtherVFramer