Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB

File: Nortel-MsCarrier-MscPassport-FrameRelayMuxMIB.mib (82823 bytes)

Imported modules

RFC-1212 Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB
Nortel-MsCarrier-MscPassport-TextualConventionsMIB

Imported symbols

OBJECT-TYPE mscPassportMIBs mscComponents
Counter32 RowPointer DisplayString
StorageType RowStatus InterfaceIndex
Gauge32 Integer32 Unsigned32
NonReplicated PassportCounter64 Link

Defined Objects

mscFrMux 1.3.6.1.4.1.562.36.2.1.112
OBJECT IDENTIFIER    

mscFrMuxRowStatusTable 1.3.6.1.4.1.562.36.2.1.112.1
This entry controls the addition and deletion of mscFrMux components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrMuxRowStatusEntry

mscFrMuxRowStatusEntry 1.3.6.1.4.1.562.36.2.1.112.1.1
A single entry in the table represents a single mscFrMux component.
OBJECT-TYPE    
  MscFrMuxRowStatusEntry  

mscFrMuxRowStatus 1.3.6.1.4.1.562.36.2.1.112.1.1.1
This variable is used as the basis for SNMP naming of mscFrMux components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscFrMuxComponentName 1.3.6.1.4.1.562.36.2.1.112.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrMuxStorageType 1.3.6.1.4.1.562.36.2.1.112.1.1.4
This variable represents the storage type value for the mscFrMux tables.
OBJECT-TYPE    
  StorageType  

mscFrMuxIndex 1.3.6.1.4.1.562.36.2.1.112.1.1.10
This variable represents the index for the mscFrMux tables.
OBJECT-TYPE    
  Integer32 1..65535  

mscFrMuxFramer 1.3.6.1.4.1.562.36.2.1.112.2
OBJECT IDENTIFIER    

mscFrMuxFramerRowStatusTable 1.3.6.1.4.1.562.36.2.1.112.2.1
This entry controls the addition and deletion of mscFrMuxFramer components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrMuxFramerRowStatusEntry

mscFrMuxFramerRowStatusEntry 1.3.6.1.4.1.562.36.2.1.112.2.1.1
A single entry in the table represents a single mscFrMuxFramer component.
OBJECT-TYPE    
  MscFrMuxFramerRowStatusEntry  

mscFrMuxFramerRowStatus 1.3.6.1.4.1.562.36.2.1.112.2.1.1.1
This variable is used as the basis for SNMP naming of mscFrMuxFramer components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscFrMuxFramerComponentName 1.3.6.1.4.1.562.36.2.1.112.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrMuxFramerStorageType 1.3.6.1.4.1.562.36.2.1.112.2.1.1.4
This variable represents the storage type value for the mscFrMuxFramer tables.
OBJECT-TYPE    
  StorageType  

mscFrMuxFramerIndex 1.3.6.1.4.1.562.36.2.1.112.2.1.1.10
This variable represents the index for the mscFrMuxFramer tables.
OBJECT-TYPE    
  NonReplicated  

mscFrMuxFramerProvTable 1.3.6.1.4.1.562.36.2.1.112.2.10
This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrMuxFramerProvEntry

mscFrMuxFramerProvEntry 1.3.6.1.4.1.562.36.2.1.112.2.10.1
An entry in the mscFrMuxFramerProvTable.
OBJECT-TYPE    
  MscFrMuxFramerProvEntry  

mscFrMuxFramerInterfaceName 1.3.6.1.4.1.562.36.2.1.112.2.10.1.1
This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run.
OBJECT-TYPE    
  Link  

mscFrMuxFramerLinkTable 1.3.6.1.4.1.562.36.2.1.112.2.11
This group contains attributes defining the framing of data on the link interface.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrMuxFramerLinkEntry

mscFrMuxFramerLinkEntry 1.3.6.1.4.1.562.36.2.1.112.2.11.1
An entry in the mscFrMuxFramerLinkTable.
OBJECT-TYPE    
  MscFrMuxFramerLinkEntry  

mscFrMuxFramerDataInversion 1.3.6.1.4.1.562.36.2.1.112.2.11.1.2
This attribute determines whether data bits are to be inverted (1 to 0 and 0 to 1) before transmission of frames to the interface. If the value of this attribute is On, the incoming data bits will also be inverted when frames are received from the link before being processed. This option is typically used in hdlc framing mode when inversion is used to guarantee 1's density. Note that aborts (in hdlc and interrupting modes) are corrupted when data is inverted. This attribute may only take its default value for non-MSA cards.
OBJECT-TYPE    
  INTEGER off(0), on(16)  

mscFrMuxFramerFrameCrcType 1.3.6.1.4.1.562.36.2.1.112.2.11.1.3
This attribute defines the type of CRC used. The CRC value calculated is appended to the end of the frames transmitted to the link. The CRC value is removed from the end of frames received from the link and checked for correctness. NoCrc means that CRC is not used. This attribute may take only its default value for non-MSA cards.
OBJECT-TYPE    
  INTEGER crc16(0), crc32(1), noCrc(2)  

mscFrMuxFramerFlagsBetweenFrames 1.3.6.1.4.1.562.36.2.1.112.2.11.1.4
This attribute defines the number of flags that are inserted between frames sent to the link interface.
OBJECT-TYPE    
  Unsigned32 1..16  

mscFrMuxFramerStateTable 1.3.6.1.4.1.562.36.2.1.112.2.12
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrMuxFramerStateEntry

mscFrMuxFramerStateEntry 1.3.6.1.4.1.562.36.2.1.112.2.12.1
An entry in the mscFrMuxFramerStateTable.
OBJECT-TYPE    
  MscFrMuxFramerStateEntry  

mscFrMuxFramerAdminState 1.3.6.1.4.1.562.36.2.1.112.2.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscFrMuxFramerOperationalState 1.3.6.1.4.1.562.36.2.1.112.2.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscFrMuxFramerUsageState 1.3.6.1.4.1.562.36.2.1.112.2.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscFrMuxFramerStatsTable 1.3.6.1.4.1.562.36.2.1.112.2.13
This group contains the operational statistics data for a Framer component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrMuxFramerStatsEntry

mscFrMuxFramerStatsEntry 1.3.6.1.4.1.562.36.2.1.112.2.13.1
An entry in the mscFrMuxFramerStatsTable.
OBJECT-TYPE    
  MscFrMuxFramerStatsEntry  

mscFrMuxFramerFrmToIf 1.3.6.1.4.1.562.36.2.1.112.2.13.1.1
The number of frames transmitted to the link interface by Framer. Note: This does not include the number of frames transmitted directly to the hardware queue, thus bypassing the Framer component.
OBJECT-TYPE    
  Counter32  

mscFrMuxFramerFrmFromIf 1.3.6.1.4.1.562.36.2.1.112.2.13.1.2
The number of frames received from the link interface by Framer.
OBJECT-TYPE    
  Counter32  

mscFrMuxFramerOctetFromIf 1.3.6.1.4.1.562.36.2.1.112.2.13.1.3
The number of bytes received from the link interface by Framer.
OBJECT-TYPE    
  Counter32  

mscFrMuxFramerAborts 1.3.6.1.4.1.562.36.2.1.112.2.13.1.4
This attribute is the total number of aborts received.
OBJECT-TYPE    
  Counter32  

mscFrMuxFramerCrcErrors 1.3.6.1.4.1.562.36.2.1.112.2.13.1.5
This attribute is the total number of frames with CRC errors, occurring in the receive direction from the link.
OBJECT-TYPE    
  Counter32  

mscFrMuxFramerLrcErrors 1.3.6.1.4.1.562.36.2.1.112.2.13.1.6
This attribute is the total number of frames with LRC errors, occurring in the Tx link prior to transmission onto the link.
OBJECT-TYPE    
  Counter32  

mscFrMuxFramerNonOctetErrors 1.3.6.1.4.1.562.36.2.1.112.2.13.1.7
This attribute is the total number of frames that were non octet aligned.
OBJECT-TYPE    
  Counter32  

mscFrMuxFramerOverruns 1.3.6.1.4.1.562.36.2.1.112.2.13.1.8
This attribute is the total number of frames received from the link for which overruns occurred.
OBJECT-TYPE    
  Counter32  

mscFrMuxFramerUnderruns 1.3.6.1.4.1.562.36.2.1.112.2.13.1.9
This attribute is the total number of frames transmitted to the link for which underruns occurred.
OBJECT-TYPE    
  Counter32  

mscFrMuxFramerLargeFrmErrors 1.3.6.1.4.1.562.36.2.1.112.2.13.1.10
This attribute is the total number of frames received which were too large. The frame execeeded the maximumFrameLengthLimit provisioned attribute or it contained more than the 255 block hardware limit.
OBJECT-TYPE    
  Counter32  

mscFrMuxFramerFrmModeErrors 1.3.6.1.4.1.562.36.2.1.112.2.13.1.11
This attribute is the total number of frames detected with framing mode errors. A framingModeError is flagged when frames are inconsistent with the specified framingType, that is when interrupting frames are used while running in hdlc mode.
OBJECT-TYPE    
  Counter32  

mscFrMuxFramerFrmToIf64 1.3.6.1.4.1.562.36.2.1.112.2.13.1.14
The number of frames transmitted to the link interface by Framer. Note: This does not include the number of frames transmitted directly to the hardware queue, thus bypassing the Framer component.
OBJECT-TYPE    
  PassportCounter64  

mscFrMuxFramerFrmFromIf64 1.3.6.1.4.1.562.36.2.1.112.2.13.1.15
The number of frames received from the link interface by Framer.
OBJECT-TYPE    
  PassportCounter64  

mscFrMuxFramerOctetFromIf64 1.3.6.1.4.1.562.36.2.1.112.2.13.1.16
The number of bytes received from the link interface by Framer.
OBJECT-TYPE    
  PassportCounter64  

mscFrMuxFramerUtilTable 1.3.6.1.4.1.562.36.2.1.112.2.14
This group contains the link utilizaiton operational data for a Framer component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrMuxFramerUtilEntry

mscFrMuxFramerUtilEntry 1.3.6.1.4.1.562.36.2.1.112.2.14.1
An entry in the mscFrMuxFramerUtilTable.
OBJECT-TYPE    
  MscFrMuxFramerUtilEntry  

mscFrMuxFramerNormPrioLinkUtilToIf 1.3.6.1.4.1.562.36.2.1.112.2.14.1.1
This attribute is the utilization of the normal and high priority data traffic (interruptable traffic) sent to the link as a percentage of the available bandwidth on the link. Note that this indluces traffic with Transfer Priorities (TP) of 0, 6 and 9 and/or Emission Priority of 2 and 3. The utilization is the average for the last minute.
OBJECT-TYPE    
  Gauge32 0..100  

mscFrMuxFramerNormPrioLinkUtilFromIf 1.3.6.1.4.1.562.36.2.1.112.2.14.1.3
This attribute is the utilization of the normal and high priority data traffic (interruptable traffic) received from the link as a percentage of the available bandwidth on the link. Note that this includes traffic with Transfer Priorities (TP) of 0, 6 and 9 and/or Emission Priority of 2 and 3. The utilization is the average for the last minute.
OBJECT-TYPE    
  Gauge32 0..100  

mscFrMuxLmi 1.3.6.1.4.1.562.36.2.1.112.3
OBJECT IDENTIFIER    

mscFrMuxLmiRowStatusTable 1.3.6.1.4.1.562.36.2.1.112.3.1
This entry controls the addition and deletion of mscFrMuxLmi components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrMuxLmiRowStatusEntry

mscFrMuxLmiRowStatusEntry 1.3.6.1.4.1.562.36.2.1.112.3.1.1
A single entry in the table represents a single mscFrMuxLmi component.
OBJECT-TYPE    
  MscFrMuxLmiRowStatusEntry  

mscFrMuxLmiRowStatus 1.3.6.1.4.1.562.36.2.1.112.3.1.1.1
This variable is used as the basis for SNMP naming of mscFrMuxLmi components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscFrMuxLmiComponentName 1.3.6.1.4.1.562.36.2.1.112.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrMuxLmiStorageType 1.3.6.1.4.1.562.36.2.1.112.3.1.1.4
This variable represents the storage type value for the mscFrMuxLmi tables.
OBJECT-TYPE    
  StorageType  

mscFrMuxLmiIndex 1.3.6.1.4.1.562.36.2.1.112.3.1.1.10
This variable represents the index for the mscFrMuxLmi tables.
OBJECT-TYPE    
  NonReplicated  

mscFrMuxLmiProvTable 1.3.6.1.4.1.562.36.2.1.112.3.10
This group contains the provisionable attributes of the Local Management Interface component of the FrMux. The Local Management Interface of the FrMux is always User Side Procedure of the User Network Interface (USP-UNI).
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrMuxLmiProvEntry

mscFrMuxLmiProvEntry 1.3.6.1.4.1.562.36.2.1.112.3.10.1
An entry in the mscFrMuxLmiProvTable.
OBJECT-TYPE    
  MscFrMuxLmiProvEntry  

mscFrMuxLmiProcedures 1.3.6.1.4.1.562.36.2.1.112.3.10.1.1
This attribute selects the procedures to be used for the Local Management Interface. The following are the supported procedures: none : No Local Management Interface procedure is active. vendorForum : Local Management Interface procedure according to the Vendor Forum specification is active. DLCI 1023 is used for the LMI protocol. ansi: Local Management Interface procedure according to the ANSI specification is active. DLCI 0 is used for the LMI protocol. ccitt: Local Management Interface procedure according to the CCITT specification is active. DLCI 0 is used for the LMI protocol.
OBJECT-TYPE    
  INTEGER none(0), vendorForum(1), ansi(2), ccitt(3)  

mscFrMuxLmiLinkVerificationTimer 1.3.6.1.4.1.562.36.2.1.112.3.10.1.2
This attribute specifies the time interval (in seconds) at which the FrMux sends Status Enquiry messages to the interface. Exchange of Status Enquiry and Status Report messages constitutes a polling cycle, so this attribute may also be interpreted as time interval at which the FrMux initiates polling cycles. It must be less than checkPointTimer (t392) configured at the other end of the Frame Relay interface. This attribute corresponds to t391 of the ANSI and CCITT specifications, and nT1 of the Vendor Forum specification.
OBJECT-TYPE    
  Unsigned32 5 | 10 | 15 | 20 | 25 | 30  

mscFrMuxLmiFullStatusPollingCycles 1.3.6.1.4.1.562.36.2.1.112.3.10.1.3
This attribute specifies every which polling cycle the FrMux sends a full STATUS ENQUIRY to the interface. Every fullStatusPollingCycles polling cycles the FrMux sends a full STATUS ENQUIRY. In all other cycles of a sequence of fullStatusPollingCycles polling cycles the FrMux sends a keep alive STATUS ENQUIRY. This attribute corresponds to n391 of the ANSI and CCITT specifications and nN1 of the Vendor Forum specification.
OBJECT-TYPE    
  Unsigned32 1..255  

mscFrMuxLmiErrorEventThreshold 1.3.6.1.4.1.562.36.2.1.112.3.10.1.4
This attribute specifies the number of error events which, if they occur within eventCount events, will cause a protocol error condition (protocolStatus = errorCondition). The error condition is cleared after eventCount sequential correct events occur (protocolStatus = normalCondition). An event is one of the following: (1) expiry of the linkVerificationTimer (t391), (2) reception of a STATUS message. An error event is one of the following: (1)non-receipt of the STATUS message in t391 seconds, (2)invalid STATUS message, (3) invalid sequence number. This attribute corresponds to n392 of the ANSI and CCITT specifications and nN2 of the Vendor Forum Specification. This attribute must be less than or equal to eventCount.
OBJECT-TYPE    
  Unsigned32 1..10  

mscFrMuxLmiEventCount 1.3.6.1.4.1.562.36.2.1.112.3.10.1.5
This attribute specifies the number of contiguous events within which no more than eventErrorThreshold error events are allowed. This attribute corresponds to n392 of the ANSI and CCITT specifications and nN3 of the Vendor Forum Specification. This attribute must be greater than or equal to errorEventThreshold.
OBJECT-TYPE    
  Unsigned32 1..10  

mscFrMuxLmiStateTable 1.3.6.1.4.1.562.36.2.1.112.3.11
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrMuxLmiStateEntry

mscFrMuxLmiStateEntry 1.3.6.1.4.1.562.36.2.1.112.3.11.1
An entry in the mscFrMuxLmiStateTable.
OBJECT-TYPE    
  MscFrMuxLmiStateEntry  

mscFrMuxLmiAdminState 1.3.6.1.4.1.562.36.2.1.112.3.11.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscFrMuxLmiOperationalState 1.3.6.1.4.1.562.36.2.1.112.3.11.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscFrMuxLmiUsageState 1.3.6.1.4.1.562.36.2.1.112.3.11.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscFrMuxLmiPsiTable 1.3.6.1.4.1.562.36.2.1.112.3.12
This group provides the protocol status of the Local Management Interface of this FrMux.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrMuxLmiPsiEntry

mscFrMuxLmiPsiEntry 1.3.6.1.4.1.562.36.2.1.112.3.12.1
An entry in the mscFrMuxLmiPsiTable.
OBJECT-TYPE    
  MscFrMuxLmiPsiEntry  

mscFrMuxLmiProtocolStatus 1.3.6.1.4.1.562.36.2.1.112.3.12.1.1
This attribute indicates whether the Lmi is in an error condition or whether the protocol is behaving normally. When operating with no LMI protocol (procedures = none), this attribute will always be set to normalCondition. When operating with an LMI protocol (procedures set to one of venforForum, ansi, ccitt), this attribute is set to errorCondition when errorEventThreshold of the last eventCount events are in error. The error condition is cleared when eventCount consecutive good events take place. The consequence of an error condition is that all Dlci's on this interface become disabled and there is no data flow in either direction.
OBJECT-TYPE    
  INTEGER errorCondition(0), normalCondition(1)  

mscFrMuxLmiStatsTable 1.3.6.1.4.1.562.36.2.1.112.3.13
This group contains the operational statistics for the FrMux Local Management Interface.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrMuxLmiStatsEntry

mscFrMuxLmiStatsEntry 1.3.6.1.4.1.562.36.2.1.112.3.13.1
An entry in the mscFrMuxLmiStatsTable.
OBJECT-TYPE    
  MscFrMuxLmiStatsEntry  

mscFrMuxLmiKeepAliveStatusEnqToIf 1.3.6.1.4.1.562.36.2.1.112.3.13.1.1
This attribute counts the number of keep alive STATUS ENQUIRY messages sent to the interface. When the maximum count is reached it wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrMuxLmiFullStatusEnqToIf 1.3.6.1.4.1.562.36.2.1.112.3.13.1.2
This attribute counts the number of full STATUS ENQUIRY messages sent to the interface. When the maximum count is reached it wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrMuxLmiProtocolErrors 1.3.6.1.4.1.562.36.2.1.112.3.13.1.3
This attribute counts the number of Local Management Interface protocol errors. Protocol errors include (1) protocol message format errors, (2) protocol timer expiry errors, and (3) sequence errors. When the maximum count is reached it wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrMuxLmiUnexpectedIes 1.3.6.1.4.1.562.36.2.1.112.3.13.1.4
This attribute counts the number of frames received with an Information Element identifier that is unknown or unexpected. When the maximum count is reached, this counter wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrMuxLmiSequenceErrors 1.3.6.1.4.1.562.36.2.1.112.3.13.1.5
This attribute counts the number of Local Management Interface sequence errors. A sequence error is receipt of an LMI message with a receive sequence number not equal to the last send sequence number. When the maximum count is reached the counter wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrMuxLmiUnexpectedReports 1.3.6.1.4.1.562.36.2.1.112.3.13.1.6
This attribute counts the number of frames received on the Local Management Interface with an unknown or unexpected report type. When the maximum count is reached the counter wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrMuxLmiNoStatusReportCount 1.3.6.1.4.1.562.36.2.1.112.3.13.1.7
This attribute counts the number of times when no status report or an invalid status report comes from the external network. This attribute is incremented in two cases: i) after a status enquiry is sent out and t391 timer expires without having a status report received. ii) an invalid status report is received. When the maximum count is reached it wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrMuxDlci 1.3.6.1.4.1.562.36.2.1.112.4
OBJECT IDENTIFIER    

mscFrMuxDlciRowStatusTable 1.3.6.1.4.1.562.36.2.1.112.4.1
This entry controls the addition and deletion of mscFrMuxDlci components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrMuxDlciRowStatusEntry

mscFrMuxDlciRowStatusEntry 1.3.6.1.4.1.562.36.2.1.112.4.1.1
A single entry in the table represents a single mscFrMuxDlci component.
OBJECT-TYPE    
  MscFrMuxDlciRowStatusEntry  

mscFrMuxDlciRowStatus 1.3.6.1.4.1.562.36.2.1.112.4.1.1.1
This variable is used as the basis for SNMP naming of mscFrMuxDlci components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscFrMuxDlciComponentName 1.3.6.1.4.1.562.36.2.1.112.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrMuxDlciStorageType 1.3.6.1.4.1.562.36.2.1.112.4.1.1.4
This variable represents the storage type value for the mscFrMuxDlci tables.
OBJECT-TYPE    
  StorageType  

mscFrMuxDlciIndex 1.3.6.1.4.1.562.36.2.1.112.4.1.1.10
This variable represents the index for the mscFrMuxDlci tables.
OBJECT-TYPE    
  Integer32 16..1007  

mscFrMuxDlciApplInfo 1.3.6.1.4.1.562.36.2.1.112.4.2
OBJECT IDENTIFIER    

mscFrMuxDlciApplInfoRowStatusTable 1.3.6.1.4.1.562.36.2.1.112.4.2.1
This entry controls the addition and deletion of mscFrMuxDlciApplInfo components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrMuxDlciApplInfoRowStatusEntry

mscFrMuxDlciApplInfoRowStatusEntry 1.3.6.1.4.1.562.36.2.1.112.4.2.1.1
A single entry in the table represents a single mscFrMuxDlciApplInfo component.
OBJECT-TYPE    
  MscFrMuxDlciApplInfoRowStatusEntry  

mscFrMuxDlciApplInfoRowStatus 1.3.6.1.4.1.562.36.2.1.112.4.2.1.1.1
This variable is used as the basis for SNMP naming of mscFrMuxDlciApplInfo components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscFrMuxDlciApplInfoComponentName 1.3.6.1.4.1.562.36.2.1.112.4.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrMuxDlciApplInfoStorageType 1.3.6.1.4.1.562.36.2.1.112.4.2.1.1.4
This variable represents the storage type value for the mscFrMuxDlciApplInfo tables.
OBJECT-TYPE    
  StorageType  

mscFrMuxDlciApplInfoIndex 1.3.6.1.4.1.562.36.2.1.112.4.2.1.1.10
This variable represents the index for the mscFrMuxDlciApplInfo tables.
OBJECT-TYPE    
  NonReplicated  

mscFrMuxDlciApplInfoProvTable 1.3.6.1.4.1.562.36.2.1.112.4.2.11
This group contains provisionable attributes of this Dlci.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrMuxDlciApplInfoProvEntry

mscFrMuxDlciApplInfoProvEntry 1.3.6.1.4.1.562.36.2.1.112.4.2.11.1
An entry in the mscFrMuxDlciApplInfoProvTable.
OBJECT-TYPE    
  MscFrMuxDlciApplInfoProvEntry  

mscFrMuxDlciApplInfoApplicationName 1.3.6.1.4.1.562.36.2.1.112.4.2.11.1.1
This attribute is the link to the application associated with this Dlci.
OBJECT-TYPE    
  Link  

mscFrMuxDlciOperTable 1.3.6.1.4.1.562.36.2.1.112.4.10
This group contains the name of the application associated with this Dlci.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrMuxDlciOperEntry

mscFrMuxDlciOperEntry 1.3.6.1.4.1.562.36.2.1.112.4.10.1
An entry in the mscFrMuxDlciOperTable.
OBJECT-TYPE    
  MscFrMuxDlciOperEntry  

mscFrMuxDlciApplicationName 1.3.6.1.4.1.562.36.2.1.112.4.10.1.1
This attribute contains the name of the application associated with this Dlci.
OBJECT-TYPE    
  RowPointer  

mscFrMuxDlciStateTable 1.3.6.1.4.1.562.36.2.1.112.4.11
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrMuxDlciStateEntry

mscFrMuxDlciStateEntry 1.3.6.1.4.1.562.36.2.1.112.4.11.1
An entry in the mscFrMuxDlciStateTable.
OBJECT-TYPE    
  MscFrMuxDlciStateEntry  

mscFrMuxDlciAdminState 1.3.6.1.4.1.562.36.2.1.112.4.11.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscFrMuxDlciOperationalState 1.3.6.1.4.1.562.36.2.1.112.4.11.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscFrMuxDlciUsageState 1.3.6.1.4.1.562.36.2.1.112.4.11.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscFrMuxDlciAbitTable 1.3.6.1.4.1.562.36.2.1.112.4.12
This group contains the A-Bit status information for this Dlci.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrMuxDlciAbitEntry

mscFrMuxDlciAbitEntry 1.3.6.1.4.1.562.36.2.1.112.4.12.1
An entry in the mscFrMuxDlciAbitTable.
OBJECT-TYPE    
  MscFrMuxDlciAbitEntry  

mscFrMuxDlciABitStatusFromIf 1.3.6.1.4.1.562.36.2.1.112.4.12.1.1
This attribute is the most recent A-Bit status received from the interface.
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

mscFrMuxDlciStatsTable 1.3.6.1.4.1.562.36.2.1.112.4.13
This group contains the operational statistics for the FrMux Dlci.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrMuxDlciStatsEntry

mscFrMuxDlciStatsEntry 1.3.6.1.4.1.562.36.2.1.112.4.13.1
An entry in the mscFrMuxDlciStatsTable.
OBJECT-TYPE    
  MscFrMuxDlciStatsEntry  

mscFrMuxDlciFrmToIf 1.3.6.1.4.1.562.36.2.1.112.4.13.1.1
This attribute counts the frames sent to the interface. When the maximum count is reached the count wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrMuxDlciBytesToIf 1.3.6.1.4.1.562.36.2.1.112.4.13.1.2
This attribute counts the bytes sent to the interface. When the maximum count is reached the count wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

mscFrMuxDlciFrmFromIf 1.3.6.1.4.1.562.36.2.1.112.4.13.1.3
This attribute counts the frames received from the interface. Frames that are discarded are not included in this count. When the maximum count is reached the count wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrMuxDlciDeFrmFromIf 1.3.6.1.4.1.562.36.2.1.112.4.13.1.4
This attribute counts the frames received from the interface with the Discard Eligibility (DE) bit set. When the count reaches maximum it wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrMuxDlciBytesFromIf 1.3.6.1.4.1.562.36.2.1.112.4.13.1.5
This attribute counts the bytes received from the interface. Frames that are discarded are not included in this count. When the maximum count is reached the count wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

mscFrMuxDlciDeBytesFromIf 1.3.6.1.4.1.562.36.2.1.112.4.13.1.6
This attribute counts the bytes received from the interface with the Discard Eligibility (DE) bit set. When the count reaches maximum it wraps to zero.
OBJECT-TYPE    
  PassportCounter64  

mscFrMuxDlciFecnFrmToIf 1.3.6.1.4.1.562.36.2.1.112.4.13.1.7
This attribute counts the frames sent to the interface with the Forward Explicit Congestion Notification (FECN) bit set. When the count reaches maximum it wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrMuxDlciFecnFrmFromIf 1.3.6.1.4.1.562.36.2.1.112.4.13.1.8
This attribute counts the frames received from the interface with the Forward Explicit Congestion Notification (FECN) bit set. When the count reaches maximum it wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrMuxDlciBecnFrmToIf 1.3.6.1.4.1.562.36.2.1.112.4.13.1.9
This attribute counts the frames sent to the interface with the Backward Explicit Congestion Notification (BECN) bit set. When the count reaches maximum it wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrMuxDlciBecnFrmFromIf 1.3.6.1.4.1.562.36.2.1.112.4.13.1.10
This attribute counts the frames received from the interface with the Backward Explicit Congestion Notification (BECN) bit set. When the count reaches maximum it wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrMuxDlciDiscCongestedFromIf 1.3.6.1.4.1.562.36.2.1.112.4.13.1.11
This attribute counts the number of frames discarded in the receive direction due to local congestion. When this count reaches maximum, it wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrMuxDlciDiscCongestedFromIfBytes 1.3.6.1.4.1.562.36.2.1.112.4.13.1.12
This attribute counts the number of bytes discarded in the receive direction due to local congestion. When this count reaches maximum, it wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrMuxDlciDiscDeCongestedFromIf 1.3.6.1.4.1.562.36.2.1.112.4.13.1.13
This attribute counts the number of discard eligible (DE=1) frames discarded in the receive direction due to local congestion. When this count reaches maximum, it wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrMuxDlciDiscDeCongestedFromIfBytes 1.3.6.1.4.1.562.36.2.1.112.4.13.1.14
This attribute counts the number of bytes of discard eligible (DE=1) traffic discarded in the receive direction due to local congestion. When the maximum count is reached the count wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrMuxDlciErrorShortFrmFromIf 1.3.6.1.4.1.562.36.2.1.112.4.13.1.15
This attribute counts the frames received with 0 octets in the information field. When the count reaches maximum it wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrMuxDlciErrorLongFrmFromIf 1.3.6.1.4.1.562.36.2.1.112.4.13.1.16
This attribute counts the frames received with number of octets in the information field greater than the maximum frame size provisioned in the component pointed to by the applicationName. When the count reaches maximum it wraps to zero. Frames whose lengths are greater than the hardware receive buffer are discarded by the Framer and are therefore not included in this count.
OBJECT-TYPE    
  Counter32  

mscFrMuxOperStatusTable 1.3.6.1.4.1.562.36.2.1.112.8
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrMuxOperStatusEntry

mscFrMuxOperStatusEntry 1.3.6.1.4.1.562.36.2.1.112.8.1
An entry in the mscFrMuxOperStatusTable.
OBJECT-TYPE    
  MscFrMuxOperStatusEntry  

mscFrMuxSnmpOperStatus 1.3.6.1.4.1.562.36.2.1.112.8.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscFrMuxIfEntryTable 1.3.6.1.4.1.562.36.2.1.112.9
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrMuxIfEntryEntry

mscFrMuxIfEntryEntry 1.3.6.1.4.1.562.36.2.1.112.9.1
An entry in the mscFrMuxIfEntryTable.
OBJECT-TYPE    
  MscFrMuxIfEntryEntry  

mscFrMuxIfAdminStatus 1.3.6.1.4.1.562.36.2.1.112.9.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscFrMuxIfIndex 1.3.6.1.4.1.562.36.2.1.112.9.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscFrMuxCidDataTable 1.3.6.1.4.1.562.36.2.1.112.10
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrMuxCidDataEntry

mscFrMuxCidDataEntry 1.3.6.1.4.1.562.36.2.1.112.10.1
An entry in the mscFrMuxCidDataTable.
OBJECT-TYPE    
  MscFrMuxCidDataEntry  

mscFrMuxCustomerIdentifier 1.3.6.1.4.1.562.36.2.1.112.10.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

mscFrMuxStateTable 1.3.6.1.4.1.562.36.2.1.112.11
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrMuxStateEntry

mscFrMuxStateEntry 1.3.6.1.4.1.562.36.2.1.112.11.1
An entry in the mscFrMuxStateTable.
OBJECT-TYPE    
  MscFrMuxStateEntry  

mscFrMuxAdminState 1.3.6.1.4.1.562.36.2.1.112.11.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscFrMuxOperationalState 1.3.6.1.4.1.562.36.2.1.112.11.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscFrMuxUsageState 1.3.6.1.4.1.562.36.2.1.112.11.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscFrMuxAvailabilityStatus 1.3.6.1.4.1.562.36.2.1.112.11.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

mscFrMuxProceduralStatus 1.3.6.1.4.1.562.36.2.1.112.11.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscFrMuxControlStatus 1.3.6.1.4.1.562.36.2.1.112.11.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscFrMuxAlarmStatus 1.3.6.1.4.1.562.36.2.1.112.11.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscFrMuxStandbyStatus 1.3.6.1.4.1.562.36.2.1.112.11.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

mscFrMuxUnknownStatus 1.3.6.1.4.1.562.36.2.1.112.11.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

mscFrMuxStatsTable 1.3.6.1.4.1.562.36.2.1.112.12
This group contains the statistics about the operational behavior of the FrMux at the interface level.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrMuxStatsEntry

mscFrMuxStatsEntry 1.3.6.1.4.1.562.36.2.1.112.12.1
An entry in the mscFrMuxStatsTable.
OBJECT-TYPE    
  MscFrMuxStatsEntry  

mscFrMuxLastUnknownDlci 1.3.6.1.4.1.562.36.2.1.112.12.1.1
This attribute identifies the most recent DLCI which user frames were received on, for which a Dlci has not been provisioned on the interface.
OBJECT-TYPE    
  Unsigned32 0..1023  

mscFrMuxUnknownDlciFramesFromIf 1.3.6.1.4.1.562.36.2.1.112.12.1.2
This attribute counts frames received from the interface with an unknown DLCI (Dlci which is not provisioned). When the maximum is reached the count wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrMuxInvalidHeaderFramesFromIf 1.3.6.1.4.1.562.36.2.1.112.12.1.3
This attribute counts the number of frames received from the interface with an invalid header format. When the maximum is reached the count wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrMuxTimeFramerCongested 1.3.6.1.4.1.562.36.2.1.112.12.1.4
This attribute accumulates the time (in msec) during which Framer congestion has been observed in the direction towards the interface. The overload causing this statistic to increase may be caused by oversubscription. When this count reaches maximum, it wraps to zero.
OBJECT-TYPE    
  Counter32  

frameRelayMuxMIB 1.3.6.1.4.1.562.36.2.2.38
OBJECT IDENTIFIER    

frameRelayMuxGroup 1.3.6.1.4.1.562.36.2.2.38.1
OBJECT IDENTIFIER    

frameRelayMuxGroupCA 1.3.6.1.4.1.562.36.2.2.38.1.1
OBJECT IDENTIFIER    

frameRelayMuxGroupCA02 1.3.6.1.4.1.562.36.2.2.38.1.1.3
OBJECT IDENTIFIER    

frameRelayMuxGroupCA02A 1.3.6.1.4.1.562.36.2.2.38.1.1.3.2
OBJECT IDENTIFIER    

frameRelayMuxCapabilities 1.3.6.1.4.1.562.36.2.2.38.3
OBJECT IDENTIFIER    

frameRelayMuxCapabilitiesCA 1.3.6.1.4.1.562.36.2.2.38.3.1
OBJECT IDENTIFIER    

frameRelayMuxCapabilitiesCA02 1.3.6.1.4.1.562.36.2.2.38.3.1.3
OBJECT IDENTIFIER    

frameRelayMuxCapabilitiesCA02A 1.3.6.1.4.1.562.36.2.2.38.3.1.3.2
OBJECT IDENTIFIER    

Defined Objects

MscFrMuxRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrMuxRowStatus  
  DisplayString as mscFrMuxComponentName  
  StorageType as mscFrMuxStorageType  
  Integer32 as mscFrMuxIndex  

MscFrMuxOperStatusEntry  
SEQUENCE    
  INTEGER as mscFrMuxSnmpOperStatus  

MscFrMuxIfEntryEntry  
SEQUENCE    
  INTEGER as mscFrMuxIfAdminStatus  
  InterfaceIndex as mscFrMuxIfIndex  

MscFrMuxCidDataEntry  
SEQUENCE    
  Unsigned32 as mscFrMuxCustomerIdentifier  

MscFrMuxStateEntry  
SEQUENCE    
  INTEGER as mscFrMuxAdminState  
  INTEGER as mscFrMuxOperationalState  
  INTEGER as mscFrMuxUsageState  
  OCTET STRING as mscFrMuxAvailabilityStatus  
  OCTET STRING as mscFrMuxProceduralStatus  
  OCTET STRING as mscFrMuxControlStatus  
  OCTET STRING as mscFrMuxAlarmStatus  
  INTEGER as mscFrMuxStandbyStatus  
  INTEGER as mscFrMuxUnknownStatus  

MscFrMuxStatsEntry  
SEQUENCE    
  Unsigned32 as mscFrMuxLastUnknownDlci  
  Counter32 as mscFrMuxUnknownDlciFramesFromIf  
  Counter32 as mscFrMuxInvalidHeaderFramesFromIf  
  Counter32 as mscFrMuxTimeFramerCongested  

MscFrMuxFramerRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrMuxFramerRowStatus  
  DisplayString as mscFrMuxFramerComponentName  
  StorageType as mscFrMuxFramerStorageType  
  NonReplicated as mscFrMuxFramerIndex  

MscFrMuxFramerProvEntry  
SEQUENCE    
  Link as mscFrMuxFramerInterfaceName  

MscFrMuxFramerLinkEntry  
SEQUENCE    
  INTEGER as mscFrMuxFramerDataInversion  
  INTEGER as mscFrMuxFramerFrameCrcType  
  Unsigned32 as mscFrMuxFramerFlagsBetweenFrames  

MscFrMuxFramerStateEntry  
SEQUENCE    
  INTEGER as mscFrMuxFramerAdminState  
  INTEGER as mscFrMuxFramerOperationalState  
  INTEGER as mscFrMuxFramerUsageState  

MscFrMuxFramerStatsEntry  
SEQUENCE    
  Counter32 as mscFrMuxFramerFrmToIf  
  Counter32 as mscFrMuxFramerFrmFromIf  
  Counter32 as mscFrMuxFramerOctetFromIf  
  Counter32 as mscFrMuxFramerAborts  
  Counter32 as mscFrMuxFramerCrcErrors  
  Counter32 as mscFrMuxFramerLrcErrors  
  Counter32 as mscFrMuxFramerNonOctetErrors  
  Counter32 as mscFrMuxFramerOverruns  
  Counter32 as mscFrMuxFramerUnderruns  
  Counter32 as mscFrMuxFramerLargeFrmErrors  
  Counter32 as mscFrMuxFramerFrmModeErrors  
  PassportCounter64 as mscFrMuxFramerFrmToIf64  
  PassportCounter64 as mscFrMuxFramerFrmFromIf64  
  PassportCounter64 as mscFrMuxFramerOctetFromIf64  

MscFrMuxFramerUtilEntry  
SEQUENCE    
  Gauge32 as mscFrMuxFramerNormPrioLinkUtilToIf  
  Gauge32 as mscFrMuxFramerNormPrioLinkUtilFromIf  

MscFrMuxLmiRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrMuxLmiRowStatus  
  DisplayString as mscFrMuxLmiComponentName  
  StorageType as mscFrMuxLmiStorageType  
  NonReplicated as mscFrMuxLmiIndex  

MscFrMuxLmiProvEntry  
SEQUENCE    
  INTEGER as mscFrMuxLmiProcedures  
  Unsigned32 as mscFrMuxLmiLinkVerificationTimer  
  Unsigned32 as mscFrMuxLmiFullStatusPollingCycles  
  Unsigned32 as mscFrMuxLmiErrorEventThreshold  
  Unsigned32 as mscFrMuxLmiEventCount  

MscFrMuxLmiStateEntry  
SEQUENCE    
  INTEGER as mscFrMuxLmiAdminState  
  INTEGER as mscFrMuxLmiOperationalState  
  INTEGER as mscFrMuxLmiUsageState  

MscFrMuxLmiPsiEntry  
SEQUENCE    
  INTEGER as mscFrMuxLmiProtocolStatus  

MscFrMuxLmiStatsEntry  
SEQUENCE    
  Counter32 as mscFrMuxLmiKeepAliveStatusEnqToIf  
  Counter32 as mscFrMuxLmiFullStatusEnqToIf  
  Counter32 as mscFrMuxLmiProtocolErrors  
  Counter32 as mscFrMuxLmiUnexpectedIes  
  Counter32 as mscFrMuxLmiSequenceErrors  
  Counter32 as mscFrMuxLmiUnexpectedReports  
  Counter32 as mscFrMuxLmiNoStatusReportCount  

MscFrMuxDlciRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrMuxDlciRowStatus  
  DisplayString as mscFrMuxDlciComponentName  
  StorageType as mscFrMuxDlciStorageType  
  Integer32 as mscFrMuxDlciIndex  

MscFrMuxDlciOperEntry  
SEQUENCE    
  RowPointer as mscFrMuxDlciApplicationName  

MscFrMuxDlciStateEntry  
SEQUENCE    
  INTEGER as mscFrMuxDlciAdminState  
  INTEGER as mscFrMuxDlciOperationalState  
  INTEGER as mscFrMuxDlciUsageState  

MscFrMuxDlciAbitEntry  
SEQUENCE    
  INTEGER as mscFrMuxDlciABitStatusFromIf  

MscFrMuxDlciStatsEntry  
SEQUENCE    
  Counter32 as mscFrMuxDlciFrmToIf  
  PassportCounter64 as mscFrMuxDlciBytesToIf  
  Counter32 as mscFrMuxDlciFrmFromIf  
  Counter32 as mscFrMuxDlciDeFrmFromIf  
  PassportCounter64 as mscFrMuxDlciBytesFromIf  
  PassportCounter64 as mscFrMuxDlciDeBytesFromIf  
  Counter32 as mscFrMuxDlciFecnFrmToIf  
  Counter32 as mscFrMuxDlciFecnFrmFromIf  
  Counter32 as mscFrMuxDlciBecnFrmToIf  
  Counter32 as mscFrMuxDlciBecnFrmFromIf  
  Counter32 as mscFrMuxDlciDiscCongestedFromIf  
  Counter32 as mscFrMuxDlciDiscCongestedFromIfBytes  
  Counter32 as mscFrMuxDlciDiscDeCongestedFromIf  
  Counter32 as mscFrMuxDlciDiscDeCongestedFromIfBytes  
  Counter32 as mscFrMuxDlciErrorShortFrmFromIf  
  Counter32 as mscFrMuxDlciErrorLongFrmFromIf  

MscFrMuxDlciApplInfoRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrMuxDlciApplInfoRowStatus  
  DisplayString as mscFrMuxDlciApplInfoComponentName  
  StorageType as mscFrMuxDlciApplInfoStorageType  
  NonReplicated as mscFrMuxDlciApplInfoIndex  

MscFrMuxDlciApplInfoProvEntry  
SEQUENCE    
  Link as mscFrMuxDlciApplInfoApplicationName