Nortel-MsCarrier-MscPassport-FrameRelayNniMIB

File: Nortel-MsCarrier-MscPassport-FrameRelayNniMIB.mib (399284 bytes)

Imported modules

RFC-1212 Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB
Nortel-MsCarrier-MscPassport-TextualConventionsMIB

Imported symbols

OBJECT-TYPE mscPassportMIBs mscComponents
Counter32 RowPointer DisplayString
StorageType RowStatus InterfaceIndex
Gauge32 Integer32 Unsigned32
AsciiString Hex NonReplicated
FixedPoint3 HexString EnterpriseDateAndTime
PassportCounter64 Link DigitString
Unsigned64

Defined Objects

mscFrNni 1.3.6.1.4.1.562.36.2.1.70
OBJECT IDENTIFIER    

mscFrNniRowStatusTable 1.3.6.1.4.1.562.36.2.1.70.1
This entry controls the addition and deletion of mscFrNni components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniRowStatusEntry

mscFrNniRowStatusEntry 1.3.6.1.4.1.562.36.2.1.70.1.1
A single entry in the table represents a single mscFrNni component.
OBJECT-TYPE    
  MscFrNniRowStatusEntry  

mscFrNniRowStatus 1.3.6.1.4.1.562.36.2.1.70.1.1.1
This variable is used as the basis for SNMP naming of mscFrNni components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscFrNniComponentName 1.3.6.1.4.1.562.36.2.1.70.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrNniStorageType 1.3.6.1.4.1.562.36.2.1.70.1.1.4
This variable represents the storage type value for the mscFrNni tables.
OBJECT-TYPE    
  StorageType  

mscFrNniIndex 1.3.6.1.4.1.562.36.2.1.70.1.1.10
This variable represents the index for the mscFrNni tables.
OBJECT-TYPE    
  Integer32 1..65535  

mscFrNniDna 1.3.6.1.4.1.562.36.2.1.70.2
OBJECT IDENTIFIER    

mscFrNniDnaRowStatusTable 1.3.6.1.4.1.562.36.2.1.70.2.1
This entry controls the addition and deletion of mscFrNniDna components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniDnaRowStatusEntry

mscFrNniDnaRowStatusEntry 1.3.6.1.4.1.562.36.2.1.70.2.1.1
A single entry in the table represents a single mscFrNniDna component.
OBJECT-TYPE    
  MscFrNniDnaRowStatusEntry  

mscFrNniDnaRowStatus 1.3.6.1.4.1.562.36.2.1.70.2.1.1.1
This variable is used as the basis for SNMP naming of mscFrNniDna components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscFrNniDnaComponentName 1.3.6.1.4.1.562.36.2.1.70.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrNniDnaStorageType 1.3.6.1.4.1.562.36.2.1.70.2.1.1.4
This variable represents the storage type value for the mscFrNniDna tables.
OBJECT-TYPE    
  StorageType  

mscFrNniDnaIndex 1.3.6.1.4.1.562.36.2.1.70.2.1.1.10
This variable represents the index for the mscFrNniDna tables.
OBJECT-TYPE    
  NonReplicated  

mscFrNniDnaCug 1.3.6.1.4.1.562.36.2.1.70.2.2
OBJECT IDENTIFIER    

mscFrNniDnaCugRowStatusTable 1.3.6.1.4.1.562.36.2.1.70.2.2.1
This entry controls the addition and deletion of mscFrNniDnaCug components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniDnaCugRowStatusEntry

mscFrNniDnaCugRowStatusEntry 1.3.6.1.4.1.562.36.2.1.70.2.2.1.1
A single entry in the table represents a single mscFrNniDnaCug component.
OBJECT-TYPE    
  MscFrNniDnaCugRowStatusEntry  

mscFrNniDnaCugRowStatus 1.3.6.1.4.1.562.36.2.1.70.2.2.1.1.1
This variable is used as the basis for SNMP naming of mscFrNniDnaCug components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscFrNniDnaCugComponentName 1.3.6.1.4.1.562.36.2.1.70.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrNniDnaCugStorageType 1.3.6.1.4.1.562.36.2.1.70.2.2.1.1.4
This variable represents the storage type value for the mscFrNniDnaCug tables.
OBJECT-TYPE    
  StorageType  

mscFrNniDnaCugIndex 1.3.6.1.4.1.562.36.2.1.70.2.2.1.1.10
This variable represents the index for the mscFrNniDnaCug tables.
OBJECT-TYPE    
  Integer32 0..255  

mscFrNniDnaCugCugOptionsTable 1.3.6.1.4.1.562.36.2.1.70.2.2.10
Attributes in this group define ClosedUserGroup options associated with interlockCode. DNA's with the same CUG (interlockCode) can make calls within this group. Various combinations which permit or prevent calls in the same CUG group are defined here.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniDnaCugCugOptionsEntry

mscFrNniDnaCugCugOptionsEntry 1.3.6.1.4.1.562.36.2.1.70.2.2.10.1
An entry in the mscFrNniDnaCugCugOptionsTable.
OBJECT-TYPE    
  MscFrNniDnaCugCugOptionsEntry  

mscFrNniDnaCugType 1.3.6.1.4.1.562.36.2.1.70.2.2.10.1.1
This attribute specifies the CUG type - the CUG is either a national CUG, or an international CUG. International closed user groups are usually established between DTEs for which there is an X.75 Gateway between; whereas national closed user groups are usually established between DTEs for which there is no X.75 Gateway between. (National CUGs cannot normally traverse an X.75 Gateway). If this attribute is set to national, then the CUG is a national CUG, in which case, the dnic should be left at its default value since it is not part of a national CUG. If this attribute is set to international, then the CUG is an international CUG, in which case, the dnic should be set appropriately as part of the CUG interlockCode.
OBJECT-TYPE    
  INTEGER national(0), international(1)  

mscFrNniDnaCugDnic 1.3.6.1.4.1.562.36.2.1.70.2.2.10.1.2
This attribute specifies the dnic (Data Network ID Code) of the CUG by which packet networks are identified. This attribute is not applicable if the CUG is a national CUG, as specified by the CUG type attribute. There are usually 1 or 2 dnics assigned per country, for public networks. The U.S. is an exception where each BOC has a dnic. Also, a group of private networks can have its own dnic. dnic value is not an arbitrary number. It is assigned by international agreement and controlled by CCITT.
OBJECT-TYPE    
  DigitString SIZE(4)  

mscFrNniDnaCugInterlockCode 1.3.6.1.4.1.562.36.2.1.70.2.2.10.1.3
This attribute specifies the CUG identifier of a national or international CUG call. It is an arbitrary number and it also can be called CUG in some descriptions. Interfaces (DNA's) defined with this number can make calls to DNA's with the same interlockCode.
OBJECT-TYPE    
  Unsigned32 0..65535  

mscFrNniDnaCugPreferential 1.3.6.1.4.1.562.36.2.1.70.2.2.10.1.4
The attribute 'preferential', if set to yes indicates that this CUG is the SIMPLE CUG (as defined in ITU X.36 [10/96]), in which case it will be used during the call establishment phase if the DTE has not explicitly specified a CUG index in the call request packet. If set to no, then this CUG is not the SIMPLE CUG, but an instance of the SELECTABLE CUG. The attribute 'preferential' is set to no by CAS when a CUG instance is created. If only one CUG instance exists under a DNA, and if this CUG's attributes 'incCalls' and 'outCall' are both set to allowed, then this CUG instance can be changed to a SIMPLE CUG by setting the attribute 'preferential' to yes. If more than one CUG instances exist under a DNA, none of the CUGs can be set by the user as 'preferential'. Essentially, the attribute 'preferential' distinguishes a SIMPLE CUG from a SELECTABLE CUG. In the case of a FRUNI DNA with a single CUG instance, the CUG can be a SIMPLE CUG (preferential = yes) or the only instance of a SELECTABLE CUG (preferential = no).
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscFrNniDnaCugOutCalls 1.3.6.1.4.1.562.36.2.1.70.2.2.10.1.5
This attribute, if set to allowed indicates that outgoing calls (from the DTE into the network) can be made using this particular CUG. If set to a value of disallowed, then outgoing calls cannot be made using this CUG - such calls will be cleared by the local DCE. This attribute corresponds to the CCITT 'Outgoing Calls Barred' feature for CUGs in that outgoing calls are barred if this attribute is set to a value of disallowed.
OBJECT-TYPE    
  INTEGER disallowed(0), allowed(1)  

mscFrNniDnaCugIncCalls 1.3.6.1.4.1.562.36.2.1.70.2.2.10.1.6
This attribute, if set to allowed indicates that incoming calls (from the network to the DTE) can be made using this particular CUG. If set to disallowed, then incoming calls cannot be made using this CUG - such calls will be cleared by the local DCE. This attribute corresponds to the CCITT 'Incoming Calls Barred' feature for CUGs in that incoming calls are barred if this attribute is set to a value of disallowed.
OBJECT-TYPE    
  INTEGER disallowed(0), allowed(1)  

mscFrNniDnaHgM 1.3.6.1.4.1.562.36.2.1.70.2.3
OBJECT IDENTIFIER    

mscFrNniDnaHgMRowStatusTable 1.3.6.1.4.1.562.36.2.1.70.2.3.1
This entry controls the addition and deletion of mscFrNniDnaHgM components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniDnaHgMRowStatusEntry

mscFrNniDnaHgMRowStatusEntry 1.3.6.1.4.1.562.36.2.1.70.2.3.1.1
A single entry in the table represents a single mscFrNniDnaHgM component.
OBJECT-TYPE    
  MscFrNniDnaHgMRowStatusEntry  

mscFrNniDnaHgMRowStatus 1.3.6.1.4.1.562.36.2.1.70.2.3.1.1.1
This variable is used as the basis for SNMP naming of mscFrNniDnaHgM components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscFrNniDnaHgMComponentName 1.3.6.1.4.1.562.36.2.1.70.2.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrNniDnaHgMStorageType 1.3.6.1.4.1.562.36.2.1.70.2.3.1.1.4
This variable represents the storage type value for the mscFrNniDnaHgM tables.
OBJECT-TYPE    
  StorageType  

mscFrNniDnaHgMIndex 1.3.6.1.4.1.562.36.2.1.70.2.3.1.1.10
This variable represents the index for the mscFrNniDnaHgM tables.
OBJECT-TYPE    
  NonReplicated  

mscFrNniDnaHgMHgAddr 1.3.6.1.4.1.562.36.2.1.70.2.3.2
OBJECT IDENTIFIER    

mscFrNniDnaHgMHgAddrRowStatusTable 1.3.6.1.4.1.562.36.2.1.70.2.3.2.1
This entry controls the addition and deletion of mscFrNniDnaHgMHgAddr components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniDnaHgMHgAddrRowStatusEntry

mscFrNniDnaHgMHgAddrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.70.2.3.2.1.1
A single entry in the table represents a single mscFrNniDnaHgMHgAddr component.
OBJECT-TYPE    
  MscFrNniDnaHgMHgAddrRowStatusEntry  

mscFrNniDnaHgMHgAddrRowStatus 1.3.6.1.4.1.562.36.2.1.70.2.3.2.1.1.1
This variable is used as the basis for SNMP naming of mscFrNniDnaHgMHgAddr components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscFrNniDnaHgMHgAddrComponentName 1.3.6.1.4.1.562.36.2.1.70.2.3.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrNniDnaHgMHgAddrStorageType 1.3.6.1.4.1.562.36.2.1.70.2.3.2.1.1.4
This variable represents the storage type value for the mscFrNniDnaHgMHgAddr tables.
OBJECT-TYPE    
  StorageType  

mscFrNniDnaHgMHgAddrIndex 1.3.6.1.4.1.562.36.2.1.70.2.3.2.1.1.10
This variable represents the index for the mscFrNniDnaHgMHgAddr tables.
OBJECT-TYPE    
  Integer32 0..63  

mscFrNniDnaHgMHgAddrAddrTable 1.3.6.1.4.1.562.36.2.1.70.2.3.2.10
This group contains attributes common to all DNAs. Every DNA used in the network is defined with this group of 2 attributes.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniDnaHgMHgAddrAddrEntry

mscFrNniDnaHgMHgAddrAddrEntry 1.3.6.1.4.1.562.36.2.1.70.2.3.2.10.1
An entry in the mscFrNniDnaHgMHgAddrAddrTable.
OBJECT-TYPE    
  MscFrNniDnaHgMHgAddrAddrEntry  

mscFrNniDnaHgMHgAddrNumberingPlanIndicator 1.3.6.1.4.1.562.36.2.1.70.2.3.2.10.1.1
This attribute indicates the Numbering Plan Indicator (NPI) of the DNA. The address may belong to X.121 or E.164 plans.
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

mscFrNniDnaHgMHgAddrDataNetworkAddress 1.3.6.1.4.1.562.36.2.1.70.2.3.2.10.1.2
This attribute contains digits which form the unique identifier of the customer interface. It can be compared (approximation only) to a telephone number where the phone number identifies a unique telephone set. DNA digits are selected and assigned by network operators.
OBJECT-TYPE    
  DigitString SIZE(1..15)  

mscFrNniDnaHgMIfTable 1.3.6.1.4.1.562.36.2.1.70.2.3.10
This group contains the interface parameters between the HuntGroupMember and the hunt group server.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniDnaHgMIfEntry

mscFrNniDnaHgMIfEntry 1.3.6.1.4.1.562.36.2.1.70.2.3.10.1
An entry in the mscFrNniDnaHgMIfTable.
OBJECT-TYPE    
  MscFrNniDnaHgMIfEntry  

mscFrNniDnaHgMAvailabilityUpdateThreshold 1.3.6.1.4.1.562.36.2.1.70.2.3.10.1.1
This attribute specifies how much availableAggregateCIR can change before an Availability Message Packet (AMP) is sent to the hunt group server informing it of the change. If the value specified is not a multiple of 2048, the value actually used as the threshold will be the next higher multiple of 2048.
OBJECT-TYPE    
  Unsigned32 2048..16777216  

mscFrNniDnaHgMOpTable 1.3.6.1.4.1.562.36.2.1.70.2.3.11
This group contains the operational attributes of the HuntGroupMember component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniDnaHgMOpEntry

mscFrNniDnaHgMOpEntry 1.3.6.1.4.1.562.36.2.1.70.2.3.11.1
An entry in the mscFrNniDnaHgMOpTable.
OBJECT-TYPE    
  MscFrNniDnaHgMOpEntry  

mscFrNniDnaHgMMaximumAvailableAggregateCir 1.3.6.1.4.1.562.36.2.1.70.2.3.11.1.1
This attribute indicates the maximum available bandwidth for this hunt group member. This value represents the total sum of the sixteen egress bandwidth pools. It is the sum of the sixteen indices of the FrNni Ca egressBandwidthPool attribute multiplied by the link speed.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDnaHgMAvailableAggregateCir 1.3.6.1.4.1.562.36.2.1.70.2.3.11.1.2
This attribute indicates the current total available bandwidth reported to the hunt group server in the Availability Message Packet (AMP). This value represents the sum of the sixteen currently available egress bandwidth pools. It is the sum of the sixteen indices of the FrNni Ca egressPoolAvailableBandwidth attribute. It increments when a connection is released. It decrements when a connection is accepted. Both this attribute and the availableDlcis attribute must be non zero for this interface to receive calls on a hunt group.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDnaHgMAvailabilityDelta 1.3.6.1.4.1.562.36.2.1.70.2.3.11.1.3
This attribute indicates the net change in the available aggregate CIR since the last Availability Message Packet (AMP) was sent to the Hunt Group. Once the absolute value of this attribute reaches the availabilityUpdateThreshold an AMP is sent to the hunt group server(s) and the availabilityDelta is re-computed.
OBJECT-TYPE    
  INTEGER -16777216..16777215  

mscFrNniDnaHgMAvailableDlcis 1.3.6.1.4.1.562.36.2.1.70.2.3.11.1.5
This attribute indicates the number of DLCIs available for SVCs on the interface associated with this DNA. If this value reaches 0, an AMP with zero availability is sent to the hunt group server(s). Both this attribute and the availableAggregateCir attribute must be non zero for this DNA to receive calls on the hunt group.
OBJECT-TYPE    
  Unsigned32 0..4096  

mscFrNniDnaHgMMaximumAvailableAggregateCir64 1.3.6.1.4.1.562.36.2.1.70.2.3.11.1.6
This attribute indicates the maximum available bandwidth for this hunt group member. This value represents the total sum of the sixteen egress bandwidth pools. It is the sum of the sixteen indices of the FrNni Ca egressBandwidthPool attribute multiplied by the link speed.
OBJECT-TYPE    
  Unsigned64 SIZE(8)  

mscFrNniDnaHgMAvailableAggregateCir64 1.3.6.1.4.1.562.36.2.1.70.2.3.11.1.7
This attribute indicates the current total available bandwidth reported to the hunt group server in the Availability Message Packet (AMP). This value represents the sum of the sixteen currently available egress bandwidth pools. It is the sum of the sixteen indices of the FrNni Ca egressPoolAvailableBandwidth attribute. It increments when a connection is released. It decrements when a connection is accepted. Both this attribute and the availableDlcis attribute must be non zero for this interface to receive calls on a hunt group.
OBJECT-TYPE    
  Unsigned64 SIZE(8)  

mscFrNniDnaAddressTable 1.3.6.1.4.1.562.36.2.1.70.2.10
This group contains attributes common to all DNAs. Every DNA used in the network is defined with this group of 2 attributes.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniDnaAddressEntry

mscFrNniDnaAddressEntry 1.3.6.1.4.1.562.36.2.1.70.2.10.1
An entry in the mscFrNniDnaAddressTable.
OBJECT-TYPE    
  MscFrNniDnaAddressEntry  

mscFrNniDnaNumberingPlanIndicator 1.3.6.1.4.1.562.36.2.1.70.2.10.1.1
This attribute indicates the Numbering Plan Indicator (NPI) of the DNA that is entered. Address may belong to X.121 or E.164 plans. X.121 is used in packet switched data networks.
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

mscFrNniDnaDataNetworkAddress 1.3.6.1.4.1.562.36.2.1.70.2.10.1.2
This attribute indicates the customer's unique identifier. It is the equivalent of the telephone number in the telephone network.
OBJECT-TYPE    
  DigitString SIZE(1..15)  

mscFrNniDnaOutgoingOptionsTable 1.3.6.1.4.1.562.36.2.1.70.2.11
This group defines DNA call options for calls made from the interface. These options are not used for calls arriving to the interface represented by this DNA.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniDnaOutgoingOptionsEntry

mscFrNniDnaOutgoingOptionsEntry 1.3.6.1.4.1.562.36.2.1.70.2.11.1
An entry in the mscFrNniDnaOutgoingOptionsTable.
OBJECT-TYPE    
  MscFrNniDnaOutgoingOptionsEntry  

mscFrNniDnaOutDefaultPriority 1.3.6.1.4.1.562.36.2.1.70.2.11.1.7
This attribute indicates the default priority of outgoing calls from the DTE to the network. It can be overridden by the discardPriority under DLCI Direct Call subcomponent. This option can be also included in X.25 signalling, in such case it will be overruled.
OBJECT-TYPE    
  INTEGER normal(0), high(1)  

mscFrNniDnaOutDefaultPathSensitivity 1.3.6.1.4.1.562.36.2.1.70.2.11.1.11
This attribute specifies the default class of path sensitivity to network for all outgoing calls that use this DNA. The chosen default class of path sensitivity applies to all outgoing calls established using this DNA. This attribute, if set to throughput, indicates that the default class is throughput sensitive. If set to delay, then the default class is delay sensitive. The default of outDefaultPathSensitivity is throughput.
OBJECT-TYPE    
  INTEGER throughput(0), delay(1)  

mscFrNniDnaOutPathSensitivityOverRide 1.3.6.1.4.1.562.36.2.1.70.2.11.1.12
If this attribute is set to yes in the call request, the called end will use the calling end provisioning data on path sensitivity to override its own provisioning data. The default of outPathSensitivityOverRide is yes.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscFrNniDnaOutDefaultPathReliability 1.3.6.1.4.1.562.36.2.1.70.2.11.1.14
This attribute specifies the default class of routing for reliability routing for all outgoing calls (from the DTE to the network) using this particular DNA. The chosen default class of routing applies to all outgoing calls established using this DNA, and applies to the packets travelling in both directions on all outgoing calls (local to remote, and remote to local). For incoming calls, the default class of routing is chosen by the calling party (as opposed to DPN, where either end of the call can choose the default routing class). This attribute, if set to a value of normal, indicates that the default class of routing is normal reliability routing. If set to a value of high, then the default class of routing is high reliability routing. High reliability is the standard choice for most DPN and Passport services. It usually indicates that packets are overflowed or retransmitted at various routing levels. Typically high reliability results in duplication and disordering of packets in the network when errors are detected or during link congestion. However, the VC handles the duplication and disordering to ensure that packets are delivered to the DTE properly. For the Frame Relay service, duplication of packets is not desired, in which case, normal reliability may be chosen as the preferred class of routing.
OBJECT-TYPE    
  INTEGER high(0), normal(1)  

mscFrNniDnaOutAccess 1.3.6.1.4.1.562.36.2.1.70.2.11.1.17
This attribute is an extension of the Closed User Group (CUG) facility, as follows: This attribute, if set to a value of allowed indicates that outgoing calls (from the DTE to the network) to the open (non-CUG) part of the network are permitted. It also permits outgoing calls to DTEs that have Incoming Access capabilities. If set to a value of disallowed, then such calls cannot be made using this DNA. Such calls will be cleared by the local DCE. This attribute corresponds to the ITU-T 'Closed User Group with Outgoing Access' feature for DNAs in that outgoing access is granted if this attribute is set to a value of allowed.
OBJECT-TYPE    
  INTEGER disallowed(0), allowed(1)  

mscFrNniDnaDefaultTransferPriority 1.3.6.1.4.1.562.36.2.1.70.2.11.1.18
This attribute specifies the default transfer priority for all outgoing calls using this particular DNA. It can be overridden by the transferPriority provisioned in the Dlci DirectCall sub-component. The transfer priority is a preference configured for an application according to its delay-sensitivity requirement. Frames with higher transfer priority are served by the network before the frames with lower priority. The transfer priority standard is defined to have 16 levels from 0 to 15. Each transfer priority n, where n indicates the transfer priority index, contains a default setting for routing class of service (multimedia, delay or throughput) and frame relay egress queue (depending on the number of supported egress queues on the remote end interface) specified by the routingClassOfService and emissionPriority attributes provisioned in the Mod Frs DprsNet Tpm/n component. The default mapping can be altered by a user if required. The default defaultTransferPriority is 0.
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4), n5(5), n6(6), n7(7), n8(8), n9(9), n10(10), n11(11), n12(12), n13(13), n14(14), n15(15)  

mscFrNniDnaTransferPriorityOverRide 1.3.6.1.4.1.562.36.2.1.70.2.11.1.19
When this attribute is set to yes in the call request, the called end will use the calling end provisioning data on transfer priority to override its own provisioning data. If it is set no, the called end will use its own provisioning data on transfer priority. This attribute is not applicable for Frame Relay SVCs. For more information about transfer priority, please refer to the previous attribute defaultTransferPriority. The default of transferPriorityOverRide is yes.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscFrNniDnaIncomingOptionsTable 1.3.6.1.4.1.562.36.2.1.70.2.12
This group defines options for incoming calls. These options are used for calls arriving to the interface represented by this DNA. For calls originated from the interface, IncomingOptions attributes are not used.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniDnaIncomingOptionsEntry

mscFrNniDnaIncomingOptionsEntry 1.3.6.1.4.1.562.36.2.1.70.2.12.1
An entry in the mscFrNniDnaIncomingOptionsTable.
OBJECT-TYPE    
  MscFrNniDnaIncomingOptionsEntry  

mscFrNniDnaIncAccess 1.3.6.1.4.1.562.36.2.1.70.2.12.1.9
This attribute, if set to a value of allowed specifies that incoming calls (from the network to the DTE) from the open (non-CUG) part of the network are permitted. It also permits incoming calls from DTEs that have outgoing access capabilities. If set to a value of disallowed, such calls cannot be made to this DNA. They will be cleared by the local DCE. This attribute corresponds to the CCITT 'Closed User Group with Incoming Access' feature for DNAs in that incoming access is granted if this attribute is set to a value of allowed.
OBJECT-TYPE    
  INTEGER disallowed(0), allowed(1)  

mscFrNniDnaCallOptionsTable 1.3.6.1.4.1.562.36.2.1.70.2.13
This group defines additional all options for not related to direction of the call.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniDnaCallOptionsEntry

mscFrNniDnaCallOptionsEntry 1.3.6.1.4.1.562.36.2.1.70.2.13.1
An entry in the mscFrNniDnaCallOptionsTable.
OBJECT-TYPE    
  MscFrNniDnaCallOptionsEntry  

mscFrNniDnaAccountClass 1.3.6.1.4.1.562.36.2.1.70.2.13.1.10
This attribute specifies the accounting class which is reserved for network operations usage. Its value is returned in the accounting record in the local and remote service type attributes. Use of this attribute is decided by network operator. This attribute is returned by the local VC in the accounting record for all calls that are set up using this particular DNA.
OBJECT-TYPE    
  Unsigned32 0..255  

mscFrNniDnaAccountCollection 1.3.6.1.4.1.562.36.2.1.70.2.13.1.11
This attribute indicates that accounting records are to be collected by the network for the various reasons: billing, test, study, auditing. The last of the parameters, force, indicates that accounting records are to be collected irrespective of other collection reasons. The force option is available for X.75 Gateways only. If none of these reasons are set, then accounting will be suppressed. To set a specific accounting collection reason, the reason is entered and the corresponding bit in the structure is set to a value of 1. To turn off a specific accounting collection reason, the reason is entered preceded with the '~' character, and the corresponding bit in the structure is set to a value of 0. The bit placement for the accounting collection reasons is as follows: Bit 0 - Bill Bit 1 - Test Bit 2 - Study Bit 3 - Audit Bit 4 - Force Description of bits: bill(0) test(1) study(2) audit(3) force(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscFrNniDnaServiceExchange 1.3.6.1.4.1.562.36.2.1.70.2.13.1.12
This attribute is an arbitrary number, Data Service Exchange, as entered by the network operator and reported in accounting record. It is converted into an internal 8-bit integer value for use in the accounting record as well as in various X.25 and X.75 Tariff utilities.
OBJECT-TYPE    
  Unsigned32 0..255  

mscFrNniDnaEgressAccounting 1.3.6.1.4.1.562.36.2.1.70.2.13.1.13
This attribute specifies if egress accounting is enabled by the frame relay service. If egress accounting is disabled, only segment counts are collected by the VC. No frame relay counts appear in the accounting records for the frame relay service. If egress accounting is enabled, the accounting records for the frame relay service will contain frame relay specific counts.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscFrNniDnaDataPath 1.3.6.1.4.1.562.36.2.1.70.2.13.1.21
This attribute specifies the data path to be used by Virtual Circuits on this interface. If the connection has a DirectCall component then the value can be overridden by the dataPath attribute of the DirectCall component. This value applies to the connection after data transfer state is reached. All the data and control trafic will be sent using this data path. If the provisioned dataPath is not available the connection is not established. The value of the dataPath is signalled by both ends of the connection. If this value is not the same at both ends dprsOnly is used for the duration of the connection. A virtual circuit connection is always established using dprsOnly even if this attribute is provisioned as some other value. dprsOnly - dynamic packet routing system is used dprsMcsOnly - dprs Multi-Service Cut-Through Switching path is used. dprsMcsFirst - dprs Multi-Service Cut-Through Switching path is used if it is available. If it is not avaliable dprsOnly is used.
OBJECT-TYPE    
  INTEGER dprsOnly(0), dprsMcsOnly(1), dprsMcsFirst(2)  

mscFrNniFramer 1.3.6.1.4.1.562.36.2.1.70.3
OBJECT IDENTIFIER    

mscFrNniFramerRowStatusTable 1.3.6.1.4.1.562.36.2.1.70.3.1
This entry controls the addition and deletion of mscFrNniFramer components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniFramerRowStatusEntry

mscFrNniFramerRowStatusEntry 1.3.6.1.4.1.562.36.2.1.70.3.1.1
A single entry in the table represents a single mscFrNniFramer component.
OBJECT-TYPE    
  MscFrNniFramerRowStatusEntry  

mscFrNniFramerRowStatus 1.3.6.1.4.1.562.36.2.1.70.3.1.1.1
This variable is used as the basis for SNMP naming of mscFrNniFramer components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscFrNniFramerComponentName 1.3.6.1.4.1.562.36.2.1.70.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrNniFramerStorageType 1.3.6.1.4.1.562.36.2.1.70.3.1.1.4
This variable represents the storage type value for the mscFrNniFramer tables.
OBJECT-TYPE    
  StorageType  

mscFrNniFramerIndex 1.3.6.1.4.1.562.36.2.1.70.3.1.1.10
This variable represents the index for the mscFrNniFramer tables.
OBJECT-TYPE    
  NonReplicated  

mscFrNniFramerProvTable 1.3.6.1.4.1.562.36.2.1.70.3.10
This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniFramerProvEntry

mscFrNniFramerProvEntry 1.3.6.1.4.1.562.36.2.1.70.3.10.1
An entry in the mscFrNniFramerProvTable.
OBJECT-TYPE    
  MscFrNniFramerProvEntry  

mscFrNniFramerInterfaceName 1.3.6.1.4.1.562.36.2.1.70.3.10.1.1
This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run.
OBJECT-TYPE    
  Link  

mscFrNniFramerLinkTable 1.3.6.1.4.1.562.36.2.1.70.3.11
This group contains attributes defining the framing of data on the link interface.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniFramerLinkEntry

mscFrNniFramerLinkEntry 1.3.6.1.4.1.562.36.2.1.70.3.11.1
An entry in the mscFrNniFramerLinkTable.
OBJECT-TYPE    
  MscFrNniFramerLinkEntry  

mscFrNniFramerDataInversion 1.3.6.1.4.1.562.36.2.1.70.3.11.1.2
This attribute determines whether data bits are to be inverted (1 to 0 and 0 to 1) before transmission of frames to the interface. If the value of this attribute is On, the incoming data bits will also be inverted when frames are received from the link before being processed. This option is typically used in hdlc framing mode when inversion is used to guarantee 1's density. Note that aborts (in hdlc and interrupting modes) are corrupted when data is inverted. This attribute may only take its default value for non-MSA cards.
OBJECT-TYPE    
  INTEGER off(0), on(16)  

mscFrNniFramerFrameCrcType 1.3.6.1.4.1.562.36.2.1.70.3.11.1.3
This attribute defines the type of CRC used. The CRC value calculated is appended to the end of the frames transmitted to the link. The CRC value is removed from the end of frames received from the link and checked for correctness. NoCrc means that CRC is not used. This attribute may take only its default value for non-MSA cards.
OBJECT-TYPE    
  INTEGER crc16(0), crc32(1), noCrc(2)  

mscFrNniFramerFlagsBetweenFrames 1.3.6.1.4.1.562.36.2.1.70.3.11.1.4
This attribute defines the number of flags that are inserted between frames sent to the link interface.
OBJECT-TYPE    
  Unsigned32 1..16  

mscFrNniFramerStateTable 1.3.6.1.4.1.562.36.2.1.70.3.12
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniFramerStateEntry

mscFrNniFramerStateEntry 1.3.6.1.4.1.562.36.2.1.70.3.12.1
An entry in the mscFrNniFramerStateTable.
OBJECT-TYPE    
  MscFrNniFramerStateEntry  

mscFrNniFramerAdminState 1.3.6.1.4.1.562.36.2.1.70.3.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscFrNniFramerOperationalState 1.3.6.1.4.1.562.36.2.1.70.3.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscFrNniFramerUsageState 1.3.6.1.4.1.562.36.2.1.70.3.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscFrNniFramerStatsTable 1.3.6.1.4.1.562.36.2.1.70.3.13
This group contains the operational statistics data for a Framer component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniFramerStatsEntry

mscFrNniFramerStatsEntry 1.3.6.1.4.1.562.36.2.1.70.3.13.1
An entry in the mscFrNniFramerStatsTable.
OBJECT-TYPE    
  MscFrNniFramerStatsEntry  

mscFrNniFramerFrmToIf 1.3.6.1.4.1.562.36.2.1.70.3.13.1.1
The number of frames transmitted to the link interface by Framer. Note: This does not include the number of frames transmitted directly to the hardware queue, thus bypassing the Framer component.
OBJECT-TYPE    
  Counter32  

mscFrNniFramerFrmFromIf 1.3.6.1.4.1.562.36.2.1.70.3.13.1.2
The number of frames received from the link interface by Framer.
OBJECT-TYPE    
  Counter32  

mscFrNniFramerOctetFromIf 1.3.6.1.4.1.562.36.2.1.70.3.13.1.3
The number of bytes received from the link interface by Framer.
OBJECT-TYPE    
  Counter32  

mscFrNniFramerAborts 1.3.6.1.4.1.562.36.2.1.70.3.13.1.4
This attribute is the total number of aborts received.
OBJECT-TYPE    
  Counter32  

mscFrNniFramerCrcErrors 1.3.6.1.4.1.562.36.2.1.70.3.13.1.5
This attribute is the total number of frames with CRC errors, occurring in the receive direction from the link.
OBJECT-TYPE    
  Counter32  

mscFrNniFramerLrcErrors 1.3.6.1.4.1.562.36.2.1.70.3.13.1.6
This attribute is the total number of frames with LRC errors, occurring in the Tx link prior to transmission onto the link.
OBJECT-TYPE    
  Counter32  

mscFrNniFramerNonOctetErrors 1.3.6.1.4.1.562.36.2.1.70.3.13.1.7
This attribute is the total number of frames that were non octet aligned.
OBJECT-TYPE    
  Counter32  

mscFrNniFramerOverruns 1.3.6.1.4.1.562.36.2.1.70.3.13.1.8
This attribute is the total number of frames received from the link for which overruns occurred.
OBJECT-TYPE    
  Counter32  

mscFrNniFramerUnderruns 1.3.6.1.4.1.562.36.2.1.70.3.13.1.9
This attribute is the total number of frames transmitted to the link for which underruns occurred.
OBJECT-TYPE    
  Counter32  

mscFrNniFramerLargeFrmErrors 1.3.6.1.4.1.562.36.2.1.70.3.13.1.10
This attribute is the total number of frames received which were too large. The frame execeeded the maximumFrameLengthLimit provisioned attribute or it contained more than the 255 block hardware limit.
OBJECT-TYPE    
  Counter32  

mscFrNniFramerFrmModeErrors 1.3.6.1.4.1.562.36.2.1.70.3.13.1.11
This attribute is the total number of frames detected with framing mode errors. A framingModeError is flagged when frames are inconsistent with the specified framingType, that is when interrupting frames are used while running in hdlc mode.
OBJECT-TYPE    
  Counter32  

mscFrNniFramerFrmToIf64 1.3.6.1.4.1.562.36.2.1.70.3.13.1.14
The number of frames transmitted to the link interface by Framer. Note: This does not include the number of frames transmitted directly to the hardware queue, thus bypassing the Framer component.
OBJECT-TYPE    
  PassportCounter64  

mscFrNniFramerFrmFromIf64 1.3.6.1.4.1.562.36.2.1.70.3.13.1.15
The number of frames received from the link interface by Framer.
OBJECT-TYPE    
  PassportCounter64  

mscFrNniFramerOctetFromIf64 1.3.6.1.4.1.562.36.2.1.70.3.13.1.16
The number of bytes received from the link interface by Framer.
OBJECT-TYPE    
  PassportCounter64  

mscFrNniFramerUtilTable 1.3.6.1.4.1.562.36.2.1.70.3.14
This group contains the link utilizaiton operational data for a Framer component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniFramerUtilEntry

mscFrNniFramerUtilEntry 1.3.6.1.4.1.562.36.2.1.70.3.14.1
An entry in the mscFrNniFramerUtilTable.
OBJECT-TYPE    
  MscFrNniFramerUtilEntry  

mscFrNniFramerNormPrioLinkUtilToIf 1.3.6.1.4.1.562.36.2.1.70.3.14.1.1
This attribute is the utilization of the normal and high priority data traffic (interruptable traffic) sent to the link as a percentage of the available bandwidth on the link. Note that this indluces traffic with Transfer Priorities (TP) of 0, 6 and 9 and/or Emission Priority of 2 and 3. The utilization is the average for the last minute.
OBJECT-TYPE    
  Gauge32 0..100  

mscFrNniFramerNormPrioLinkUtilFromIf 1.3.6.1.4.1.562.36.2.1.70.3.14.1.3
This attribute is the utilization of the normal and high priority data traffic (interruptable traffic) received from the link as a percentage of the available bandwidth on the link. Note that this includes traffic with Transfer Priorities (TP) of 0, 6 and 9 and/or Emission Priority of 2 and 3. The utilization is the average for the last minute.
OBJECT-TYPE    
  Gauge32 0..100  

mscFrNniLmi 1.3.6.1.4.1.562.36.2.1.70.4
OBJECT IDENTIFIER    

mscFrNniLmiRowStatusTable 1.3.6.1.4.1.562.36.2.1.70.4.1
This entry controls the addition and deletion of mscFrNniLmi components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniLmiRowStatusEntry

mscFrNniLmiRowStatusEntry 1.3.6.1.4.1.562.36.2.1.70.4.1.1
A single entry in the table represents a single mscFrNniLmi component.
OBJECT-TYPE    
  MscFrNniLmiRowStatusEntry  

mscFrNniLmiRowStatus 1.3.6.1.4.1.562.36.2.1.70.4.1.1.1
This variable is used as the basis for SNMP naming of mscFrNniLmi components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscFrNniLmiComponentName 1.3.6.1.4.1.562.36.2.1.70.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrNniLmiStorageType 1.3.6.1.4.1.562.36.2.1.70.4.1.1.4
This variable represents the storage type value for the mscFrNniLmi tables.
OBJECT-TYPE    
  StorageType  

mscFrNniLmiIndex 1.3.6.1.4.1.562.36.2.1.70.4.1.1.10
This variable represents the index for the mscFrNniLmi tables.
OBJECT-TYPE    
  NonReplicated  

mscFrNniLmiParmsTable 1.3.6.1.4.1.562.36.2.1.70.4.10
This group contains the provisionable attributes of the Local Management Interface component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniLmiParmsEntry

mscFrNniLmiParmsEntry 1.3.6.1.4.1.562.36.2.1.70.4.10.1
An entry in the mscFrNniLmiParmsTable.
OBJECT-TYPE    
  MscFrNniLmiParmsEntry  

mscFrNniLmiProcedures 1.3.6.1.4.1.562.36.2.1.70.4.10.1.1
This attribute selects the procedures to be used for the Local Management Interface. The following are the supported procedures: none: Local Management Interface procedures are not running on this interface. This accommodates Frame Relay user equipment which didn't implement any LMI procedures. In this case, the remaining attributes of this group are ignored. ansi: Local Management Interface procedures from the ANSI specification are supported. DLCI 0 is used for the LMI protocol. itu: Local Management Interface procedures from the ITU-T specification are supported. DLCI 0 is used for the LMI protocol. Was previously ccitt. autoConfigure: The interface determines automatically which Local Management Interface procedures to use. The procedures currently being used can be seen in the operational attribute opProcedures.
OBJECT-TYPE    
  INTEGER none(0), ansi(2), itu(3), autoConfigure(4)  

mscFrNniLmiAsyncStatusReport 1.3.6.1.4.1.562.36.2.1.70.4.10.1.2
This attribute selects the use of asynchronous PVC status report procedures as specified in ANSI and CCITT specification.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscFrNniLmiErrorEventThreshold 1.3.6.1.4.1.562.36.2.1.70.4.10.1.3
For the network-side-procedure, an event is defined as follows: (1) receipt of a STATUS ENQUIRY message, or (2) expiration of timer T392. An error event is (1) nonreceipt of STATUS ENQUIRY in T392 seconds; (2) invalid format of a LMI message; (3) invalid receive sequence number. For the user-side-procedure, an event is defined as a polling cycle or a status enquiry and status report exchange. An error event is (1) non-receipt of a STATUS within the polling cycle, or (2) invalid format of a LMI message, or (3) invalid sequence number This attribute specifies the number of error events which, if they occur within eventCount events, will cause a protocol error condition. The condition is cleared after eventCount sequential correct events occur. It must be less than or equal to eventCount (n393)
OBJECT-TYPE    
  Unsigned32 1..10  

mscFrNniLmiEventCount 1.3.6.1.4.1.562.36.2.1.70.4.10.1.4
This attribute specifies the number of contiguous events within which no more than eventErrorThreshold error events are allowed. It must be greater than or equal to errorEventThreshold (n392).
OBJECT-TYPE    
  Unsigned32 1..10  

mscFrNniLmiCheckPointTimer 1.3.6.1.4.1.562.36.2.1.70.4.10.1.5
This attribute selects the time (in seconds) within which a STATUS ENQUIRY message is expected. It must be greater than linkVerificationTimer (t391).
OBJECT-TYPE    
  Unsigned32 5 | 10 | 15 | 20 | 25 | 30  

mscFrNniLmiIgnoreActiveBit 1.3.6.1.4.1.562.36.2.1.70.4.10.1.7
This attribute specifies whether the Frame Relay LMI Active Bit (A-bit) has a bearing on the transfer of user data across this Frame Relay interface for both directions of traffic flow. When this attribute is set to yes, the A-bit status of a user DLCI connection does not affect data transfer. When this attribute is set to no, data received from the local interface is discarded if an A-bit =0 condition exists towards the local user. Data being sent to the local interface is discarded if an A- bit = 0 condition exists towards the local user.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscFrNniLmiNniParmsTable 1.3.6.1.4.1.562.36.2.1.70.4.11
This group contains the provisionable attributes of the Local Management Interface component which are unique to NNI.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniLmiNniParmsEntry

mscFrNniLmiNniParmsEntry 1.3.6.1.4.1.562.36.2.1.70.4.11.1
An entry in the mscFrNniLmiNniParmsTable.
OBJECT-TYPE    
  MscFrNniLmiNniParmsEntry  

mscFrNniLmiFullStatusPollingCycles 1.3.6.1.4.1.562.36.2.1.70.4.11.1.1
This attribute specifies how frequently the Frame Relay NNI service should initiate a Status Enquiry for a full PVC status report. A polling cycle is a Status Enquiry and Status Report exchange.
OBJECT-TYPE    
  Unsigned32 1..255  

mscFrNniLmiLinkVerificationTimer 1.3.6.1.4.1.562.36.2.1.70.4.11.1.2
This attribute specifies how frequently the Frame Relay NNI service should initiate a Status Enquiry for link integrity verification. It must be less than checkPointTimer (t392).
OBJECT-TYPE    
  Unsigned32 5 | 10 | 15 | 20 | 25 | 30  

mscFrNniLmiStateTable 1.3.6.1.4.1.562.36.2.1.70.4.12
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniLmiStateEntry

mscFrNniLmiStateEntry 1.3.6.1.4.1.562.36.2.1.70.4.12.1
An entry in the mscFrNniLmiStateTable.
OBJECT-TYPE    
  MscFrNniLmiStateEntry  

mscFrNniLmiAdminState 1.3.6.1.4.1.562.36.2.1.70.4.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscFrNniLmiOperationalState 1.3.6.1.4.1.562.36.2.1.70.4.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscFrNniLmiUsageState 1.3.6.1.4.1.562.36.2.1.70.4.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscFrNniLmiPsiTable 1.3.6.1.4.1.562.36.2.1.70.4.13
This group provides the protocol status of the Local Management Interface.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniLmiPsiEntry

mscFrNniLmiPsiEntry 1.3.6.1.4.1.562.36.2.1.70.4.13.1
An entry in the mscFrNniLmiPsiTable.
OBJECT-TYPE    
  MscFrNniLmiPsiEntry  

mscFrNniLmiProtocolStatus 1.3.6.1.4.1.562.36.2.1.70.4.13.1.1
This attribute indicates whether the LMI is in an error condition or whether the LMI procedures are behaving normally. When operating with no LMI protocol, this attribute is always set to normalCondition. When operating with LMI procedures, this attribute is set to errorCondition after n392 of the last n393 events are in error. The consequence of an errorCondition is that all DLCIs on this interface will become inactive in both directions. The errorCondition is lifted and a normalCondition is indicated when a sufficient number of events have occurred without error. In ANSI, this occurs when n393 consecutive good events take place. If the procedures attribute is set to autoConfigure, this attribute is se to configuring while adaptive LMI determines which LMI procedures are running on the link. A single LMI error event during auto configuration causes the attribute value to change to errorCondition. If during configuring no LMI message is received, an LMI errorCondition is raised after n392 x t392 seconds.
OBJECT-TYPE    
  INTEGER errorCondition(0), normalCondition(1), configuring(2)  

mscFrNniLmiOpProcedures 1.3.6.1.4.1.562.36.2.1.70.4.13.1.2
This attribute indicates the procedures being used for the Local Management Interface. This attribute should be ignored if protocolStatus is not normalCondition. The following procedures are supported: none: Local Management Interface procedures are not running on this interface. This accommodates Frame Relay user equipment that has not implemented any LMI procedures. ansi: Local Management Interface procedures from the ANSI specification are running. DLCI 0 is used for the LMI protocol. itu: Local Management Interface procedures from the ITU-T specification are running. DLCI 0 is used for the LMI protocol. Was previously ccitt. unknown: Local Management Interface procedures have yet to be determined by Adaptive LMI.
OBJECT-TYPE    
  INTEGER none(0), ansi(2), itu(3), unknown(4)  

mscFrNniLmiStatsTable 1.3.6.1.4.1.562.36.2.1.70.4.14
This group contains the operational statistics for the Frame Relay NNI Local Management Interface.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniLmiStatsEntry

mscFrNniLmiStatsEntry 1.3.6.1.4.1.562.36.2.1.70.4.14.1
An entry in the mscFrNniLmiStatsTable.
OBJECT-TYPE    
  MscFrNniLmiStatsEntry  

mscFrNniLmiKeepAliveStatusToIf 1.3.6.1.4.1.562.36.2.1.70.4.14.1.1
This attribute counts the number of Local Management Interface keep alive status messages sent to the external network in response to a status enquiry for keep alive status. When the maximum count is exceeded it wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrNniLmiFullStatusToIf 1.3.6.1.4.1.562.36.2.1.70.4.14.1.2
This attribute counts the number of Local Management Interface full status messages sent to the external network in response to a status enquiry for keep alive or full status. When the maximum count is exceeded it wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrNniLmiKeepAliveStatusEnqFromIf 1.3.6.1.4.1.562.36.2.1.70.4.14.1.3
This attribute counts the number of Local Management Interface valid keep alive status enquiry messages received from the external network. When the maximum count is exceeded it wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrNniLmiFullStatusEnqFromIf 1.3.6.1.4.1.562.36.2.1.70.4.14.1.4
This attribute counts the number of Local Management Interface valid full status enquiry messages received from the external network. When the maximum count is exceeded it wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrNniLmiNetworkSideEventHistory 1.3.6.1.4.1.562.36.2.1.70.4.14.1.5
This attribute displays the Local Management Interface network side procedure event history in order of occurrence. An event is represented by a single symbol. A '+' symbol indicates a good event. An 'X' symbol indicates a protocol error event. The leftmost event is the most recent to occur. The provisioned eventCount (nN3/ N393) dictates the maximum number of events displayed. A good event is triggered by receipt of a valid status enquiry message. An error event is either a nT2/T392 timer expiry or receipt of a status enquiry with bad sequence numbers.
OBJECT-TYPE    
  AsciiString SIZE(1..10)  

mscFrNniLmiUserSideEventHistory 1.3.6.1.4.1.562.36.2.1.70.4.14.1.6
This attribute displays the Local Management Interface user side procedure event history in order of occurrence. An event is represented by a single symbol. A '+' symbol indicates a good event. An 'X' symbol indicates a protocol error event. The leftmost event is the most recent to occur. The provisioned eventCount (nN3/ N393) dictates the maximum number of events displayed. A good event is triggered by receipt of a valid status message. An error event is either a nT1/T391 timer expiry or receipt of a status message with bad sequence numbers.
OBJECT-TYPE    
  AsciiString SIZE(1..10)  

mscFrNniLmiProtocolErrors 1.3.6.1.4.1.562.36.2.1.70.4.14.1.7
This attribute counts the number of Local Management Interface protocol errors. It is the sum of the sequence (sequenceErrors and statusSequenceErrors) and timeout (pollingVerifTimeouts and noStatusReportCount) errors. When the maximum count is exceeded it wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrNniLmiUnexpectedIes 1.3.6.1.4.1.562.36.2.1.70.4.14.1.8
This attribute counts the number of Local Management Interface frames received with an Information Element identifier that is unknown or unexpected. An unexpected Information Element is not a protocol error. When the maximum count is exceeded, this counter wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrNniLmiSequenceErrors 1.3.6.1.4.1.562.36.2.1.70.4.14.1.9
This attribute counts the number of Local Management Interface Status Enquiry message sequence errors. A sequence error is receipt of a Status Enquiry message with a receive sequence number not equal to the last send sequence number. When the maximum count is exceeded the counter wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrNniLmiStatusSequenceErrors 1.3.6.1.4.1.562.36.2.1.70.4.14.1.10
This attribute counts the number of Local Management Interface Status message sequence errors. A sequence error is receipt of a Status message with a receive sequence number not equal to the last send sequence number. When the maximum count is exceeded the counter wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrNniLmiUnexpectedReports 1.3.6.1.4.1.562.36.2.1.70.4.14.1.11
This attribute counts the number of Local Management Interface frames received with an unknown or unexpected report type. An unexpected report type is not a protocol error. When the maximum count is exceeded the counter wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrNniLmiPollingVerifTimeouts 1.3.6.1.4.1.562.36.2.1.70.4.14.1.12
This attribute counts the number of checkPointTImer (t392) timer expiries occurring on the Local Management Interface. When the maximum count is exceeded the counter wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrNniLmiNoStatusReportCount 1.3.6.1.4.1.562.36.2.1.70.4.14.1.13
This attribute counts the number of times when no status report or an invalid status report comes from the external network. This attribute is incremented in two cases: i) after a status enquiry is sent out and T391 timer expires without having a status report received. ii) an invalid status report is received. When the maximum count is exceeded it wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrNniDlci 1.3.6.1.4.1.562.36.2.1.70.5
OBJECT IDENTIFIER    

mscFrNniDlciRowStatusTable 1.3.6.1.4.1.562.36.2.1.70.5.1
This entry controls the addition and deletion of mscFrNniDlci components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniDlciRowStatusEntry

mscFrNniDlciRowStatusEntry 1.3.6.1.4.1.562.36.2.1.70.5.1.1
A single entry in the table represents a single mscFrNniDlci component.
OBJECT-TYPE    
  MscFrNniDlciRowStatusEntry  

mscFrNniDlciRowStatus 1.3.6.1.4.1.562.36.2.1.70.5.1.1.1
This variable is used as the basis for SNMP naming of mscFrNniDlci components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscFrNniDlciComponentName 1.3.6.1.4.1.562.36.2.1.70.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrNniDlciStorageType 1.3.6.1.4.1.562.36.2.1.70.5.1.1.4
This variable represents the storage type value for the mscFrNniDlci tables.
OBJECT-TYPE    
  StorageType  

mscFrNniDlciIndex 1.3.6.1.4.1.562.36.2.1.70.5.1.1.10
This variable represents the index for the mscFrNniDlci tables.
OBJECT-TYPE    
  Integer32 16..1007  

mscFrNniDlciDc 1.3.6.1.4.1.562.36.2.1.70.5.2
OBJECT IDENTIFIER    

mscFrNniDlciDcRowStatusTable 1.3.6.1.4.1.562.36.2.1.70.5.2.1
This entry controls the addition and deletion of mscFrNniDlciDc components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniDlciDcRowStatusEntry

mscFrNniDlciDcRowStatusEntry 1.3.6.1.4.1.562.36.2.1.70.5.2.1.1
A single entry in the table represents a single mscFrNniDlciDc component.
OBJECT-TYPE    
  MscFrNniDlciDcRowStatusEntry  

mscFrNniDlciDcRowStatus 1.3.6.1.4.1.562.36.2.1.70.5.2.1.1.1
This variable is used as the basis for SNMP naming of mscFrNniDlciDc components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscFrNniDlciDcComponentName 1.3.6.1.4.1.562.36.2.1.70.5.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrNniDlciDcStorageType 1.3.6.1.4.1.562.36.2.1.70.5.2.1.1.4
This variable represents the storage type value for the mscFrNniDlciDc tables.
OBJECT-TYPE    
  StorageType  

mscFrNniDlciDcIndex 1.3.6.1.4.1.562.36.2.1.70.5.2.1.1.10
This variable represents the index for the mscFrNniDlciDc tables.
OBJECT-TYPE    
  NonReplicated  

mscFrNniDlciDcOptionsTable 1.3.6.1.4.1.562.36.2.1.70.5.2.10
This group defines attributes associated with a direct call. It defines connection in terms of path and call option parameters. This connection can be permanent (PVC), switched (SVC), or switched permanent (SPVC). It can have four facilities: - CCITT Facilities - DTE Facilities - National Facilities - International Facilities The total number of bytes of facilities including the facility codes and all of the facility data from all of the four classes of facilities must not exceed 512 bytes.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniDlciDcOptionsEntry

mscFrNniDlciDcOptionsEntry 1.3.6.1.4.1.562.36.2.1.70.5.2.10.1
An entry in the mscFrNniDlciDcOptionsTable.
OBJECT-TYPE    
  MscFrNniDlciDcOptionsEntry  

mscFrNniDlciDcRemoteNpi 1.3.6.1.4.1.562.36.2.1.70.5.2.10.1.3
This attribute specifies the Numbering Plan Indicator (NPI) of the remoteDna.
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

mscFrNniDlciDcRemoteDna 1.3.6.1.4.1.562.36.2.1.70.5.2.10.1.4
This attribute specifies the Data Network Address (DNA) of the service at the remote end of the DLCI. This is the called (destination) DCE address (DNA) of this PVC.
OBJECT-TYPE    
  DigitString SIZE(1..15)  

mscFrNniDlciDcRemoteDlci 1.3.6.1.4.1.562.36.2.1.70.5.2.10.1.5
This attribute specifies the remote DLCI of the PVC connection.
OBJECT-TYPE    
  Unsigned32 16..1007  

mscFrNniDlciDcType 1.3.6.1.4.1.562.36.2.1.70.5.2.10.1.6
This attribute specifies the type of VC call. If the value is set to permanentMaster, then a permanent connection will be established between two ends. The remote end must be defined as a permanentSlave, permanentBackupSlave, or permanentSlaveWithBackup. The connection cannot be established if the remote end is defined as anything else. The end defined as permanentMaster always initiates the calls. It attempts to call once per minute. If the value is set to permanentSlave then a permanent connection will be established between two ends. The remote end must be defined as a permanentMaster. The connection cannot be established if the remote end is defined as anything else. The permanentSlave end attempts to call once per minute. If the value is set to permanentSlaveWithBackup then a permanent connection will be established between the two ends. The remote end must be defined as a permanentMaster. The connection cannot be established if the remote interface is defined as anything else. The permanentSlaveWithBackup attempts to call once per minute. When type is set to permanentSlaveWithBackup, the connection is cleared if the interface becomes unavailable. This enables a retry of the connection which can be redirected to the permanentBackupSlave. If the value is set to permanentBackupSlave then a permanent connection is established between the two ends only if the permanentMaster end is disconnected from the permanentSlaveWithBackup end and a backup call is established by the call redirection system. If the permanentSlaveWithBackup interface becomes available again, the permanentBackupSlave end is disconnected and the permanentSlaveWithBackup end is reconnected to the permanentMaster end. The permanentBackupSlave end does not try to establish a call. If the value is set to spvcMaster, then a permanent connection is established between two ends, with resiliency at the NNI), if the connection transits across two or more networks. The remote end, which may be in the same network, or an external network that is reachable via Frame Relay NNIs, must be defined as either a spvcSlave, spvcBackupSlave or spvcSlaveWithBackup. The connection cannot be established if the remote end is defined as anything else. The end defined as spvcMaster always initiates the call. It attempts to call once per minute. The call is attempted by the spvcMaster and accepted by the remote end only if all of the following conditions are satisfied, at both ends: 1. The physical layer must be operational. 2. The LMI procedures must be in normalCondition (that is, no service affecting condition). 3. If the LMI side attribute is provisioned to both, the A-bit received from the interface must be Active. If the LMI side attribute is not provisioned to both, this condition does not apply. After a call is cleared, the spvcMaster end attempts to retry the call according to the rule for the clear cause. If the call is cleared or rejected due to the failure of one of the three conditions indicated above, or due to unavailability of resources along any point in the connection path, the call will be retried after 60 seconds. For all other causes, such as loss of service at an NNI, the call will be retried immediately. If the value is set to spvcSlave then an SPVC connection is established between two ends. The remote end must be defined as an spvcMaster. The connection cannot be established if the remote end is defined as anything else. The spvcSlave end does not attempt to call. If the value is set to spvcSlaveWithBackup then a SPVC connection is established between the two ends. The remote end must be defined as an spvcMaster. The connection cannot be established if the remote interface end is defined as anything else. Unlike a permanentSlaveWithBackup end, the spvcSlaveWithBackup end does not attempt to call. If the value is set to spvcSlaveWithBackup, the connection is cleared if the interface becomes unavailable. This enables a retry of the connection by the spvcMaster end, which may be redirected to an end that is set to spvcBackupSlave. If the value is set to spvcBackupSlave then an SPVC connection is established between the two ends only if the spvcMaster end is disconnected from the spvcSlaveWithBackup end, and a backup call is redirected by the call redirection system. Unlike the PVC connection, if the spvcSlaveWithBackup interface becomes available again, the spvcBackupSlave end is not disconnected and the spvcSlaveWithBackup end is not reconnected to the spvcMaster end. Neither the spvcBackupSlave nor the spvcSlaveWithBackup ends try to establish an SPVC call.
OBJECT-TYPE    
  INTEGER permanentMaster(1), permanentSlave(2), permanentBackupSlave(3), permanentSlaveWithBackup(4), spvcMaster(5), spvcSlave(6), spvcBackupSlave(7), spvcSlaveWithBackup(8)  

mscFrNniDlciDcTransferPriority 1.3.6.1.4.1.562.36.2.1.70.5.2.10.1.9
This attribute specifies the transfer priority to the local network for the outgoing calls using this particular DLCI. It overrides the defaultTransferPriority provisioned in its associated Dna component. The transfer priority is a preference configured for an application according to its delay-sensitivity requirement. Frames with higher transfer priority are served by the network before the frames with lower priority. The transfer priority standard is defined to have 16 levels from 0 to 15. Each transfer priority n, where n is the transfer priority index, has a default setting for routing class of service (multimedia, delay, or throughput) and Frame Relay egress queue (depending on the number of supported egress queues on the remote end interface). These settings are specified by the routingClassOfService and emissionPriority attributes provisioned under the Mod Frs DprsNet Tpm/n component. Specifying useDnaDefTP means using the value given by defaultTransferPriority in the associated Dna for this DLCI.
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4), n5(5), n6(6), n7(7), n8(8), n9(9), n10(10), n11(11), n12(12), n13(13), n14(14), n15(15), useDnaDefTP(255)  

mscFrNniDlciDcDiscardPriority 1.3.6.1.4.1.562.36.2.1.70.5.2.10.1.10
This attribute specifies the discard priority for outgoing call using this DLCI. The discard priority has three provisioning values: normal, high, and useDnaDefPriority. Under congestion conditions, traffic with normal priority is discarded before traffic with high priority. The Dna default value (provisioned by outDefaultPriority) is taken if this attribute is set to the value useDnaDefPriority.
OBJECT-TYPE    
  INTEGER normal(0), high(1), useDnaDefPriority(3)  

mscFrNniDlciDcDeDiscardPriority 1.3.6.1.4.1.562.36.2.1.70.5.2.10.1.11
This attribute specifies whether the discardPriority applies to DE frames for this DLCI. When set to determinedByDiscardPriority, traffic with DE bit set will be discarded according to the setting of the discardPriority. When set to lowest, all traffic with DE bit set is treated the same and is sent to the subnet at the lowest discard priority.
OBJECT-TYPE    
  INTEGER lowest(0), determinedByDiscardPriority(1)  

mscFrNniDlciDcDataPath 1.3.6.1.4.1.562.36.2.1.70.5.2.10.1.12
This attribute specifies the data path to be used by Virtual Circuits on this interface. The value of the dataPath attribute in the Dna component is overridden by this attribute if the value is not useDnaValue. This value applies to the connection after data transfer state is reached. All the data and control traffic will be sent using this data path. If the provisioned dataPath is not available the connection is not established. The value of the dataPath is signalled by both ends of the connection. If this value is not the same at both ends dprsOnly is used for the duration of the connection. A virtual circuit connection is always established using dprsOnly even if this attribute is provisioned as some other value. dprsOnly - The dynamic packet routing system is used. dprsMcsOnly - The DPRS Multi-Service Cut-Through Switching path is used. dprsMcsFirst - The DPRS Multi-Service Cut-Through Switching path is used if it is available. If it is not available, dprsOnly is used. useDnaValue - The routing system used is based on the value provisioned in the Dna component.
OBJECT-TYPE    
  INTEGER dprsOnly(0), dprsMcsOnly(1), dprsMcsFirst(2), useDnaValue(3)  

mscFrNniDlciDcCugIndex 1.3.6.1.4.1.562.36.2.1.70.5.2.10.1.13
This attribute specifies the CUG index which is to be signalled in PVC and SPVC call requests to the remote end. The type of CUG signalling is defined in attribute cugType in this component.
OBJECT-TYPE    
  Unsigned32 0..255  

mscFrNniDlciDcCugType 1.3.6.1.4.1.562.36.2.1.70.5.2.10.1.14
This attribute specifies the type of CUG signalling to be used in PVC and SPVC call requests. Index of CUG to be used is defined in attribute cugIndex in this component. Possible values are: cug - signal CUG cugOa - signal CUG with outgoing access doNotSignal - no CUG in call request
OBJECT-TYPE    
  INTEGER doNotSignal(0), cug(3), cugOa(9)  

mscFrNniDlciDcMapIpCosToFrQos 1.3.6.1.4.1.562.36.2.1.70.5.2.10.1.15
This attribute specifies whether an IP TOS value is mapped to an FR QOS. The mapping used is provisioned in the Mod Frs IpCosToFrQos component. When this attribute is set to yes, at Frame Relay egress, the IP TOS byte in each frame is checked. The TOS value determines the egress emission queue and the discard priority for that frame. When this attribute is set to no, FR QOS is determined by the provisioned discard priority and transfer priority.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscFrNniDlciDcNfaTable 1.3.6.1.4.1.562.36.2.1.70.5.2.202
This is the i'th National facility required for this direct call. Within the provisioning system, the user specifies the facility code along with the facility parameters. The facility is represented internally as a hexadecimal string following the X.25 ITU-T representation for facility data. Two explicit attributes discardPriority and pathSensitivity are created to replace H.01 and H.30 in the group VcsDirectCallOptionsProv of this file. The migrate escape here (DcComponent::migrateFaxEscape) propagates the old provisioning data under H.01 and H.30 into discardPriority and transferPriority. The rule of the above propagation are: 0 in H.01 is equivalent to discardPriority 0; 1 in H.01 is equivalent to discardPriority 1. And 0 in H.30 is equivalent to transferPriority throughput; 1 in H.30 is equivalent to pathSensitivity delay. Please refer to discardPriority and pathSensitivity for more information on how to use them.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniDlciDcNfaEntry

mscFrNniDlciDcNfaEntry 1.3.6.1.4.1.562.36.2.1.70.5.2.202.1
An entry in the mscFrNniDlciDcNfaTable.
OBJECT-TYPE    
  MscFrNniDlciDcNfaEntry  

mscFrNniDlciDcNfaIndex 1.3.6.1.4.1.562.36.2.1.70.5.2.202.1.1
This variable represents the index for the mscFrNniDlciDcNfaTable.
OBJECT-TYPE    
  Integer32 1 | 48  

mscFrNniDlciDcNfaValue 1.3.6.1.4.1.562.36.2.1.70.5.2.202.1.2
This variable represents an individual value for the mscFrNniDlciDcNfaTable.
OBJECT-TYPE    
  HexString SIZE(0..128)  

mscFrNniDlciDcNfaRowStatus 1.3.6.1.4.1.562.36.2.1.70.5.2.202.1.3
This variable is used to control the addition and deletion of individual values of the mscFrNniDlciDcNfaTable.
OBJECT-TYPE    
  RowStatus  

mscFrNniDlciVc 1.3.6.1.4.1.562.36.2.1.70.5.3
OBJECT IDENTIFIER    

mscFrNniDlciVcRowStatusTable 1.3.6.1.4.1.562.36.2.1.70.5.3.1
This entry controls the addition and deletion of mscFrNniDlciVc components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniDlciVcRowStatusEntry

mscFrNniDlciVcRowStatusEntry 1.3.6.1.4.1.562.36.2.1.70.5.3.1.1
A single entry in the table represents a single mscFrNniDlciVc component.
OBJECT-TYPE    
  MscFrNniDlciVcRowStatusEntry  

mscFrNniDlciVcRowStatus 1.3.6.1.4.1.562.36.2.1.70.5.3.1.1.1
This variable is used as the basis for SNMP naming of mscFrNniDlciVc components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscFrNniDlciVcComponentName 1.3.6.1.4.1.562.36.2.1.70.5.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrNniDlciVcStorageType 1.3.6.1.4.1.562.36.2.1.70.5.3.1.1.4
This variable represents the storage type value for the mscFrNniDlciVc tables.
OBJECT-TYPE    
  StorageType  

mscFrNniDlciVcIndex 1.3.6.1.4.1.562.36.2.1.70.5.3.1.1.10
This variable represents the index for the mscFrNniDlciVc tables.
OBJECT-TYPE    
  NonReplicated  

mscFrNniDlciVcCadTable 1.3.6.1.4.1.562.36.2.1.70.5.3.10
This group represents operational call data related to Frame Relay Vc. It can be displayed only for Frame Relay Vc which is created by application.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniDlciVcCadEntry

mscFrNniDlciVcCadEntry 1.3.6.1.4.1.562.36.2.1.70.5.3.10.1
An entry in the mscFrNniDlciVcCadTable.
OBJECT-TYPE    
  MscFrNniDlciVcCadEntry  

mscFrNniDlciVcType 1.3.6.1.4.1.562.36.2.1.70.5.3.10.1.1
This attribute displays the type of call, pvc,svc,spvc or frf10spvc.
OBJECT-TYPE    
  INTEGER svc(0), pvc(1), spvc(2), frf10spvc(3)  

mscFrNniDlciVcState 1.3.6.1.4.1.562.36.2.1.70.5.3.10.1.2
This attribute displays the state of call control. P5 state is not supported but is listed for completness. Transitions from one state to another take very short time. state most often displayed is dataTransferP4.
OBJECT-TYPE    
  INTEGER creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8)  

mscFrNniDlciVcPreviousState 1.3.6.1.4.1.562.36.2.1.70.5.3.10.1.3
This attribute displays the previous state of call control. This is a valuable field to determine how the processing is progressing.
OBJECT-TYPE    
  INTEGER creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8)  

mscFrNniDlciVcDiagnosticCode 1.3.6.1.4.1.562.36.2.1.70.5.3.10.1.4
This attribute displays the internal substate of call control. It is used to further refine state of call processing.
OBJECT-TYPE    
  Unsigned32 0..255  

mscFrNniDlciVcPreviousDiagnosticCode 1.3.6.1.4.1.562.36.2.1.70.5.3.10.1.5
This attribute displays the internal substate of call control. It is used to further refine state of call processing.
OBJECT-TYPE    
  Unsigned32 0..255  

mscFrNniDlciVcCalledNpi 1.3.6.1.4.1.562.36.2.1.70.5.3.10.1.6
This attribute displays the Numbering Plan Indicator (NPI) of the called end.
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

mscFrNniDlciVcCalledDna 1.3.6.1.4.1.562.36.2.1.70.5.3.10.1.7
This attribute displays the Data Network Address (Dna) of the called (destination) DTE to which this call is sent. This address if defined at recieving end will complete Vc connection.
OBJECT-TYPE    
  DigitString SIZE(1..15)  

mscFrNniDlciVcCalledLcn 1.3.6.1.4.1.562.36.2.1.70.5.3.10.1.8
This attribute displays the Logical Channel Number of the called end. It is valid only after both ends of Vc exchanged relevant information.
OBJECT-TYPE    
  Unsigned32 1..65535  

mscFrNniDlciVcCallingNpi 1.3.6.1.4.1.562.36.2.1.70.5.3.10.1.9
This attribute displays the Numbering Plan Indicator (NPI) of the calling end.
OBJECT-TYPE    
  INTEGER x121(0), e164(1)  

mscFrNniDlciVcCallingDna 1.3.6.1.4.1.562.36.2.1.70.5.3.10.1.10
This attribute displays the Data Network Address (Dna) of the calling end.
OBJECT-TYPE    
  DigitString SIZE(1..15)  

mscFrNniDlciVcCallingLcn 1.3.6.1.4.1.562.36.2.1.70.5.3.10.1.11
This attribute displays the Logical Channel Number of the calling end.
OBJECT-TYPE    
  Unsigned32 1..65535  

mscFrNniDlciVcAccountingEnabled 1.3.6.1.4.1.562.36.2.1.70.5.3.10.1.12
This attribute indicates that this optional section of accounting record is suppressed or permitted. If accountingEnabled is yes, conditions for generation of accounting record were met. These conditions include billing options, vc recovery conditions and Module wide accounting data options.
OBJECT-TYPE    
  INTEGER yes(0), no(1)  

mscFrNniDlciVcFastSelectCall 1.3.6.1.4.1.562.36.2.1.70.5.3.10.1.13
This attribute displays that this is a fast select call.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscFrNniDlciVcPathReliability 1.3.6.1.4.1.562.36.2.1.70.5.3.10.1.19
This attribute displays the path reliability.
OBJECT-TYPE    
  INTEGER high(0), normal(1)  

mscFrNniDlciVcAccountingEnd 1.3.6.1.4.1.562.36.2.1.70.5.3.10.1.20
This attribute indicates if this end should generate an accounting record. Normally, callingEnd is the end to generate an accounting record.
OBJECT-TYPE    
  INTEGER callingEnd(0), calledEnd(1)  

mscFrNniDlciVcPriority 1.3.6.1.4.1.562.36.2.1.70.5.3.10.1.21
This attribute displays whether the call is a normal or a high priority call.
OBJECT-TYPE    
  INTEGER normal(0), high(1)  

mscFrNniDlciVcSegmentSize 1.3.6.1.4.1.562.36.2.1.70.5.3.10.1.22
This attribute displays the segment size (in bytes) used on the call. It is used to calculate the number of segments transmitted and received.
OBJECT-TYPE    
  Unsigned32 0..4096  

mscFrNniDlciVcMaxSubnetPktSize 1.3.6.1.4.1.562.36.2.1.70.5.3.10.1.27
This attribute indicates the maximum packet size allowed on the Vc.
OBJECT-TYPE    
  Unsigned32 0..4096  

mscFrNniDlciVcRcosToNetwork 1.3.6.1.4.1.562.36.2.1.70.5.3.10.1.28
This attribute indicates the routing metric routing class of service to the network.
OBJECT-TYPE    
  INTEGER throughput(0), delay(1), multimedia(2)  

mscFrNniDlciVcRcosFromNetwork 1.3.6.1.4.1.562.36.2.1.70.5.3.10.1.29
This attribute displays the routing metric Routing Class of Service from the Network.
OBJECT-TYPE    
  INTEGER throughput(0), delay(1), multimedia(2)  

mscFrNniDlciVcEmissionPriorityToNetwork 1.3.6.1.4.1.562.36.2.1.70.5.3.10.1.30
This attribute displays the network internal emission priotity to the network.
OBJECT-TYPE    
  INTEGER normal(0), high(1), interrupting(2)  

mscFrNniDlciVcEmissionPriorityFromNetwork 1.3.6.1.4.1.562.36.2.1.70.5.3.10.1.31
This attribute displays the network internal emission priotity from the network.
OBJECT-TYPE    
  INTEGER normal(0), high(1), interrupting(2)  

mscFrNniDlciVcDataPath 1.3.6.1.4.1.562.36.2.1.70.5.3.10.1.32
This attribute indicates the data path used by the connection. The data path is provisioned in Dna and DirectCall components. The displayed value of this attribute can be different from the provisioned value. If the connection is using dprsOnly data path, the string dprsOnly is displayed. (dynamic packet routing system) If the connection is using dprsMcsOnly data path, the string dprsMcsOnly is displayed. If the connection is using dprsMcsFirst data path, the string dprsMcsFirst is displayed.
OBJECT-TYPE    
  AsciiString SIZE(0..32)  

mscFrNniDlciVcIntdTable 1.3.6.1.4.1.562.36.2.1.70.5.3.11
This group defines display of interval data collected by Vc. Data in this group is variable and may depend on time when this display command is issued.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniDlciVcIntdEntry

mscFrNniDlciVcIntdEntry 1.3.6.1.4.1.562.36.2.1.70.5.3.11.1
An entry in the mscFrNniDlciVcIntdTable.
OBJECT-TYPE    
  MscFrNniDlciVcIntdEntry  

mscFrNniDlciVcCallReferenceNumber 1.3.6.1.4.1.562.36.2.1.70.5.3.11.1.1
This attribute is obsolete. It is replaced by the callReferenceNumber attribute to display the call reference number in decimal. The SNMP reference for the callReferenceNumber attribute is callReferenceNumberDecimal.
OBJECT-TYPE    
  Hex 0..16777215  

mscFrNniDlciVcElapsedTimeTillNow 1.3.6.1.4.1.562.36.2.1.70.5.3.11.1.2
This attribute displays the elapsed time representing the period of this interval data. It is elapsed time in 0.1 second increments since Vc started.
OBJECT-TYPE    
  Unsigned32 0..16777215  

mscFrNniDlciVcSegmentsRx 1.3.6.1.4.1.562.36.2.1.70.5.3.11.1.3
This attribute displays the number of segments received at the time command was issued. This is the segment received count maintained by accounting at each end of the Vc. This counter is updated only when the packet cannot be successfully delivered out of the sink Vc and to the sink AP Conditions in which packets may be discarded by the sink Vc include: missing packets due to subnet discards, segmentation protocol violations due to subnet discard, duplicated and out-of-ranged packets and packets that arrive while Vc is in path recovery state.
OBJECT-TYPE    
  Unsigned32 0..16777215  

mscFrNniDlciVcSegmentsSent 1.3.6.1.4.1.562.36.2.1.70.5.3.11.1.4
This attribute displays the number of segments sent at the time command was issued. This is the segment sent count maintained by accounting at the source Vc. Vc only counts packets that Vc thinks can be delivered successfully into the subnet. In reality, these packets may be dropped by trunking, for instance. This counter is not updated when splitting fails, when Vc is in a path recovery state, when packet forwarding fails to forward this packet and when subsequent packets have to be discarded as we want to minimize the chance of out-of-sequence and do not intentionally send out-of- sequenced packets into the subnet.
OBJECT-TYPE    
  Unsigned32 0..16777215  

mscFrNniDlciVcStartTime 1.3.6.1.4.1.562.36.2.1.70.5.3.11.1.5
This attribute displays the start time of this interval period. If Vc spans 12 hour time or time of day change startTime reflects new time as recorded at 12 hour periods or time of day changes.
OBJECT-TYPE    
  EnterpriseDateAndTime SIZE(0 | 19)  

mscFrNniDlciVcCallReferenceNumberDecimal 1.3.6.1.4.1.562.36.2.1.70.5.3.11.1.7
This attribute displays the call reference number which is a unique number generated by the switch.The same Call Reference Number is stored in the interval data (accounting record) at both ends of the call. It can be used as one of the attributes in matching duplicate records generated at each end of the call.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciVcFrdTable 1.3.6.1.4.1.562.36.2.1.70.5.3.12
This group defines Frame Relay attributes collected by Frame Relay Vc. The purpose of Vc attributes is to aid end users and verification people to understand the Vc internal behavior. This is particularly useful when the network has experienced abnormality and we want to isolate problems and pinpoint trouble spots. Attributes are collected on a per Vc basis. Until a need is identified, statistics are not collected at a processor level. Each attribute is stored in a 32 bit field and is initialized to zero when a Vc enters into the data transfer state. When a PVC is disconnected and then connected again, the attributes will be reset. Attributes cannot be reset through other methods. Frame Relay Vc uses a best effort data packet delivery protocol and a different packet segmentation and combination methods from the General Vc. The Frame Relay Vc uses the same call setup and control mechanism (e.g. the support of non-flow control data packets) as in a General Vc. Most General Vc statistics and internal variables are used in a Frame Relay Vc and are displayed by software developers
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniDlciVcFrdEntry

mscFrNniDlciVcFrdEntry 1.3.6.1.4.1.562.36.2.1.70.5.3.12.1
An entry in the mscFrNniDlciVcFrdTable.
OBJECT-TYPE    
  MscFrNniDlciVcFrdEntry  

mscFrNniDlciVcFrmCongestedToSubnet 1.3.6.1.4.1.562.36.2.1.70.5.3.12.1.2
This attribute displays the number of frames from link discarded due to lack of resources. It keeps track of the number of frames from link that have to be discarded. The discard reasons include insufficient memory for splitting the frame into smaller subnet packet size.
OBJECT-TYPE    
  Unsigned32 0..5000  

mscFrNniDlciVcCannotForwardToSubnet 1.3.6.1.4.1.562.36.2.1.70.5.3.12.1.3
This attribute displays the number of discarded packets that can not be forwarded into the subnet because of subnet congestion. Number of frames from link discarded due to failure in forwarding a packet from Vc into the subnet.- This attribute is increased when packet forwarding fails to forward a packet into the subnet. If a frame is split into multiple subnet packets and a partial packet has to be discarded, all subsequent partial packets that have not yet been delivered to the subnet will be discarded as well.
OBJECT-TYPE    
  Unsigned32 0..5000  

mscFrNniDlciVcNotDataXferToSubnet 1.3.6.1.4.1.562.36.2.1.70.5.3.12.1.4
This attribute records the number of frames from link discarded when the Vc tries to recover from internal path failure.
OBJECT-TYPE    
  Unsigned32 0..5000  

mscFrNniDlciVcOutOfRangeFrmFromSubnet 1.3.6.1.4.1.562.36.2.1.70.5.3.12.1.5
This attribute displays the number of frames from subnet discarded due to out of sequence range for arriving too late.
OBJECT-TYPE    
  Unsigned32 0..5000  

mscFrNniDlciVcCombErrorsFromSubnet 1.3.6.1.4.1.562.36.2.1.70.5.3.12.1.6
This attribute records the number of subnet packets discarded at the sink Vc due to the Vc segmentation and combination protocol error. Usually, this occurs when the subnet discards packets and thus this statistics can be used to guest the number of subnet packets that are not delivered to the Vc. It cannot be used as an actual measure because some subnet packets may have been delivered to Vc but have to be discarded because these are partial packets to a frame in which some other partial packets have not been properly delivered to Vc
OBJECT-TYPE    
  Unsigned32 0..5000  

mscFrNniDlciVcDuplicatesFromSubnet 1.3.6.1.4.1.562.36.2.1.70.5.3.12.1.7
This attribute displays the number of subnet packets discarded due to duplication. Although packets are not retransmitted by the Frame Relay Vc, it is possible for the subnet to retransmit packets. When packets are out-of-sequenced and copies of the same packets arrive, then this attribute is increased.
OBJECT-TYPE    
  Unsigned32 0..5000  

mscFrNniDlciVcNotDataXferFromSubnet 1.3.6.1.4.1.562.36.2.1.70.5.3.12.1.8
This attribute displays the number of subnet packets discarded when data transfer is suspended in Vc recovery.
OBJECT-TYPE    
  Unsigned32 0..5000  

mscFrNniDlciVcFrmLossTimeouts 1.3.6.1.4.1.562.36.2.1.70.5.3.12.1.9
This attribute displays the number of lost frame timer expiries. When this count is excessive, the network is very congested and packets have been discarded in the subnet.
OBJECT-TYPE    
  Unsigned32 0..5000  

mscFrNniDlciVcOoSeqByteCntExceeded 1.3.6.1.4.1.562.36.2.1.70.5.3.12.1.10
This attribute displays the number times that the out of sequence byte threshold is exceeded. When the threshold is exceeded, this condition is treated as if the loss frame timer has expired and all frames queued at the sink Vc are delivered to the AP. We need to keep this count to examine if the threshold is engineered properly. This should be used in conjunction with the peak value of out-of- sequenced queue and the number of times the loss frame timer has expired. This count should be relatively small when compared with loss frame timer expiry count.
OBJECT-TYPE    
  Unsigned32 0..5000  

mscFrNniDlciVcPeakOoSeqPktCount 1.3.6.1.4.1.562.36.2.1.70.5.3.12.1.11
This attribute displays the frame relay peak packet count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced queue. The counter can be used to deduce the message buffer requirement on a Vc.
OBJECT-TYPE    
  Unsigned32 0..5000  

mscFrNniDlciVcPeakOoSeqFrmForwarded 1.3.6.1.4.1.562.36.2.1.70.5.3.12.1.12
This attribute displays the frame relay peak size of the sequence packet queue. The subnet may deliver packets out-of- sequenced. These packets are then queued in an out-of-sequenced queue, waiting for a packet with the expected sequence number to come. When that packet arrives, this attribute records the maximum number of packets that were out-of-sequenced, but now have become in-sequenced. The statistics is used to measure expected queue size due to normal subnet packet disorder (not due to subnet packet discard). Current implementation also uses this statistics to set a maximum size for the out-of-sequenced queue.
OBJECT-TYPE    
  Unsigned32 0..5000  

mscFrNniDlciVcSendSequenceNumber 1.3.6.1.4.1.562.36.2.1.70.5.3.12.1.13
This attribute displays the Vc internal packet's send sequence number. Note that a 'packet' in this context, may be either a user data packet, or an OAM frame.
OBJECT-TYPE    
  Unsigned32 0..5000  

mscFrNniDlciVcPktRetryTimeouts 1.3.6.1.4.1.562.36.2.1.70.5.3.12.1.15
This attribute displays the number of packets which have retransmission time-outs. When this count is excessive, the network is very congested and packets have been discarded in the subnet.
OBJECT-TYPE    
  Unsigned32 0..5000  

mscFrNniDlciVcPeakRetryQueueSize 1.3.6.1.4.1.562.36.2.1.70.5.3.12.1.16
This attribute displays the peak size of retransmission queue. This attribute is used as an indicator of the acknowledgment behavior across the subnet. Records the largest body of unacknowledged packets.
OBJECT-TYPE    
  Unsigned32 0..5000  

mscFrNniDlciVcSubnetRecoveries 1.3.6.1.4.1.562.36.2.1.70.5.3.12.1.17
This attribute displays the number of successful Vc recovery attempts.
OBJECT-TYPE    
  Unsigned32 0..5000  

mscFrNniDlciVcOoSeqPktCntExceeded 1.3.6.1.4.1.562.36.2.1.70.5.3.12.1.19
This attribute displays the number times that the out of sequence packet threshold is exceeded. When the threshold is exceeded, this condition is treated as if the loss frame timer has expired and all frames queued at the sink Vc are delivered to the AP. We need to keep this count to examine if the threshold is engineered properly. This should be used in conjunction with the peak value of out-of- sequenced queue and the number of times the loss frame timer has expired. This count should be relatively small when compared with loss frame timer expiry count.
OBJECT-TYPE    
  Unsigned32 0..255  

mscFrNniDlciVcPeakOoSeqByteCount 1.3.6.1.4.1.562.36.2.1.70.5.3.12.1.20
This attribute displays the frame relay peak byte count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced queue. The counter can be used to deduce the message buffer requirement on a Vc.
OBJECT-TYPE    
  Unsigned32 0..50000  

mscFrNniDlciVcDmepTable 1.3.6.1.4.1.562.36.2.1.70.5.3.417
This attribute displays the data path used by the connection. Data path is provisioned in Dna and DirectCall components. If the connection is using dprsOnly data path, this attribute is empty. If the connection is using dprsMcsOnly or dprsMcsFirst data path, this attribute displays component name of the dprsMcsEndPoint.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniDlciVcDmepEntry

mscFrNniDlciVcDmepEntry 1.3.6.1.4.1.562.36.2.1.70.5.3.417.1
An entry in the mscFrNniDlciVcDmepTable.
OBJECT-TYPE    
  MscFrNniDlciVcDmepEntry  

mscFrNniDlciVcDmepValue 1.3.6.1.4.1.562.36.2.1.70.5.3.417.1.1
This variable represents both the value and the index for the mscFrNniDlciVcDmepTable.
OBJECT-TYPE    
  RowPointer  

mscFrNniDlciSp 1.3.6.1.4.1.562.36.2.1.70.5.4
OBJECT IDENTIFIER    

mscFrNniDlciSpRowStatusTable 1.3.6.1.4.1.562.36.2.1.70.5.4.1
This entry controls the addition and deletion of mscFrNniDlciSp components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniDlciSpRowStatusEntry

mscFrNniDlciSpRowStatusEntry 1.3.6.1.4.1.562.36.2.1.70.5.4.1.1
A single entry in the table represents a single mscFrNniDlciSp component.
OBJECT-TYPE    
  MscFrNniDlciSpRowStatusEntry  

mscFrNniDlciSpRowStatus 1.3.6.1.4.1.562.36.2.1.70.5.4.1.1.1
This variable is used as the basis for SNMP naming of mscFrNniDlciSp components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscFrNniDlciSpComponentName 1.3.6.1.4.1.562.36.2.1.70.5.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrNniDlciSpStorageType 1.3.6.1.4.1.562.36.2.1.70.5.4.1.1.4
This variable represents the storage type value for the mscFrNniDlciSp tables.
OBJECT-TYPE    
  StorageType  

mscFrNniDlciSpIndex 1.3.6.1.4.1.562.36.2.1.70.5.4.1.1.10
This variable represents the index for the mscFrNniDlciSp tables.
OBJECT-TYPE    
  NonReplicated  

mscFrNniDlciSpParmsTable 1.3.6.1.4.1.562.36.2.1.70.5.4.11
This group contains the provisionable attributes for the Data Link Connection Identifier. These attributes reflect the service parameters specific to this instance of DLCI . The congestion control attributes in this group are defined in T1.606 Addendum 1.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniDlciSpParmsEntry

mscFrNniDlciSpParmsEntry 1.3.6.1.4.1.562.36.2.1.70.5.4.11.1
An entry in the mscFrNniDlciSpParmsTable.
OBJECT-TYPE    
  MscFrNniDlciSpParmsEntry  

mscFrNniDlciSpMaximumFrameSize 1.3.6.1.4.1.562.36.2.1.70.5.4.11.1.1
This attribute specifies the maximum number of octets which may be included in the information field. The frame relay header and CRC octets are not included in this definition. This attribute corresponds to the dN1 parameter described in the Vendor Forum Specification.
OBJECT-TYPE    
  Unsigned32 1..8187  

mscFrNniDlciSpRateEnforcement 1.3.6.1.4.1.562.36.2.1.70.5.4.11.1.2
This attribute specifies whether rate enforcement is in effect for this user Data Link Connection on this Frame Relay interface. Turning on rate enforcement means that CIR and DE=1 traffic will be measured and enforced. Turning off rate enforcement means that all frames from the user will be accepted and no modifications to the frame with respect to the DE bit will be made.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscFrNniDlciSpCommittedInformationRate 1.3.6.1.4.1.562.36.2.1.70.5.4.11.1.3
This attribute specifies the committed information rate (CIR) in bits per second (bit/s). When rateEnforcement is set to on, cir is the rate at which the network agrees to transfer information under normal conditions. This rate is measured over a measurement interval (t) that is determined internally based on CIR and the committed burst size (Bc). An exception to this occurs when CIR is provisioned to be zero, in which case the measurement interval (t) must be provisioned explicitly. This attribute is ignored when rateEnforcement is off. If rateEnforcement is on and this attribute is 0, Bc must also be 0.
OBJECT-TYPE    
  Gauge32 0..50000000  

mscFrNniDlciSpCommittedBurstSize 1.3.6.1.4.1.562.36.2.1.70.5.4.11.1.4
This attribute specifies the committed burst size (Bc) in bits. bc is the amount of data that a network agrees to transfer under normal conditions over a measurement interval (t). Data marked DE=1 is not accounted for in Bc. This attribute is ignored when rateEnforcement is off. If rateEnforcement is on and this attribute is 0, cir must also be 0.
OBJECT-TYPE    
  Gauge32 0..50000000  

mscFrNniDlciSpExcessBurstSize 1.3.6.1.4.1.562.36.2.1.70.5.4.11.1.5
This attribute specifies the excess burst size (Be) in bits. Be is the amount of uncommitted data that the network will attempt to deliver over measurement interval T. Data marked DE=1 by the user or by the network is accounted for here. CIR, Bc, and Be cannot all be zero when rateEnforcement is on.
OBJECT-TYPE    
  Gauge32 0..50000000  

mscFrNniDlciSpMeasurementInterval 1.3.6.1.4.1.562.36.2.1.70.5.4.11.1.6
When cir and bc are zero and rateEnforcement is on, this attribute must be provisioned to specify the time interval (in milliseconds) over which rates and burst sizes are measured. When cir and bc are non-zero, the time interval is internally calculated and is not shown. In that situation, this field is ignored, and is not representative of the time interval. This attribute is ignored when rateEnforcement is off, or when cir and bc are non-zero. If rateEnforcement is on and both cir and bc are zero, this field must be non-zero.
OBJECT-TYPE    
  Unsigned32 0..25500  

mscFrNniDlciSpRateAdaptation 1.3.6.1.4.1.562.36.2.1.70.5.4.11.1.7
This attribute specifies whether rate adaptation is in effect for this user Data Link Connection on this Frame Relay interface. Rate adaptation is a feature that, in periods of congestion, adapts the rate at which the user is allowed to send data into the network to that which the network is able to handle at that time. This pro-active measure of handling congestion optimizes network resources by causing the ingress to discard frames that would otherwise be discarded in the network. If this attribute is set to on, then, at the onset of congestion, the excess information rate (EIR) is reduced to a very low rate. If congestion persists, then the allowed CIR is reduced geometrically by 25% of the current value at that time. The minimum to which CIR can be reduced is 1/16th (6.25%) of the provisioned value. As congestion alleviates, CIR is increased linearly by 6.25% of the provisioned value specified in committedInformationRate. If set to eirOnly, then rate adaptation will only apply to the excess information rate (EIR). At the onset of congestion, the allowed EIR is reduced by 25% of its provisioned value. If congestion persists, EIR is reduced geometrically by 25% of the current value at that time. As congestion alleviates, EIR is gradually increased linearly by 6.25% of the provisioned EIR. If set to cirProportionate, then rate adaptation will also only apply to the excess information rate (EIR). At the onset of congestion the initial allowed EIR is set to a multiple of the provisioned CIR. If congestion persists, the allowed EIR is reduced geometrically by 25% of the current value at that time. As congestion alleviates, EIR is gradually increased linearly by 6.25% of the provisioned EIR. Note that the allowed EIR may be set higher than the provisioned EIR, since it is calculated initially using another parameter, the provisioned CIR. If the allowed EIR at the moment is higher than the provisioned EIR, then the provisioned EIR is used instead. This attribute can only be set to on eirOnly or cirProportionate if rateEnforcement is turned on.
OBJECT-TYPE    
  INTEGER off(0), on(1), eirOnly(2), cirProportionate(3)  

mscFrNniDlciSpAccounting 1.3.6.1.4.1.562.36.2.1.70.5.4.11.1.8
This attribute specifies whether accounting data collection and record generation is turned on at this DLCI. For accounting data collection and record generation to be turned on, the accountingOn bit and at least one of the accountCollection bits in the DataNetworkAddress component must be set to on.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscFrNniDlciSpRaSensitivity 1.3.6.1.4.1.562.36.2.1.70.5.4.11.1.9
This attribute specifies the sensitivity of the rate adaptation system. A higher number indicates a higher sensitivity and therefore a quicker reaction time to network conditions. A quicker reaction time allows the network to discard frames at the access and protect network resources, but can lead to false alarms and a greater fluctuation of the allowed rate. A higher setting therefore tends to favour the protection of the network over the allowed throughput of the user. A lower number indicates a lower sensitivity and therefore a slower reaction to network conditions. A slower reaction time results in a greater amount of user traffic allowed into the network, but can lead to a waste of network bandwidth since the traffic may be discarded at the congested resource. A lower setting therefore tends to favour the allowed throughput of the user over the protection of the network. This attribute is applicable for adapting EIR when rateAdaptation is eirOnly or cirProportionate, or CIR when rateAdaptation is on. This attribute is ignored if rateAdaptation is turned off.
OBJECT-TYPE    
  Unsigned32 1..20  

mscFrNniDlciSpUpdateBCI 1.3.6.1.4.1.562.36.2.1.70.5.4.11.1.10
This attribute specifies whether internal Backward Congestion Indication (BCI) bits will report congestion external to the Passport network, as communicated through incoming BECN bits. If updateBCI is set to on, then BCI bits for incoming frames will be set if the BECN on the frame is set. If updatBCI is set to off, then incoming BECN bits will have no effect. Setting updateBCI on for a DLCI means that the remote end of the DLCI, which is specified by the remotedna and remotedlci attributes of the dc component of the dlci, may perform Rate Adaptation using the flow of incoming BECN bits, in addition to internal Passport congestion management systems. If the rateAdaptation attribute of the remote dlci is provisioned as eirOnly, cirProportionate, or on, then congestion from another network connected to a Passport network may trigger dynamic congestion management. If the rateAdaptation attribute of the remote dlci is provisioned to off, then the setting of updateBCI attribute here will have no effect..
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscFrNniDlciLb 1.3.6.1.4.1.562.36.2.1.70.5.5
OBJECT IDENTIFIER    

mscFrNniDlciLbRowStatusTable 1.3.6.1.4.1.562.36.2.1.70.5.5.1
This entry controls the addition and deletion of mscFrNniDlciLb components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniDlciLbRowStatusEntry

mscFrNniDlciLbRowStatusEntry 1.3.6.1.4.1.562.36.2.1.70.5.5.1.1
A single entry in the table represents a single mscFrNniDlciLb component.
OBJECT-TYPE    
  MscFrNniDlciLbRowStatusEntry  

mscFrNniDlciLbRowStatus 1.3.6.1.4.1.562.36.2.1.70.5.5.1.1.1
This variable is used as the basis for SNMP naming of mscFrNniDlciLb components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscFrNniDlciLbComponentName 1.3.6.1.4.1.562.36.2.1.70.5.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrNniDlciLbStorageType 1.3.6.1.4.1.562.36.2.1.70.5.5.1.1.4
This variable represents the storage type value for the mscFrNniDlciLb tables.
OBJECT-TYPE    
  StorageType  

mscFrNniDlciLbIndex 1.3.6.1.4.1.562.36.2.1.70.5.5.1.1.10
This variable represents the index for the mscFrNniDlciLb tables.
OBJECT-TYPE    
  NonReplicated  

mscFrNniDlciLbStatsTable 1.3.6.1.4.1.562.36.2.1.70.5.5.10
This group contains all the statistics for the data loopback tool.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniDlciLbStatsEntry

mscFrNniDlciLbStatsEntry 1.3.6.1.4.1.562.36.2.1.70.5.5.10.1
An entry in the mscFrNniDlciLbStatsTable.
OBJECT-TYPE    
  MscFrNniDlciLbStatsEntry  

mscFrNniDlciLbLocalTotalFrm 1.3.6.1.4.1.562.36.2.1.70.5.5.10.1.1
This attribute records the number of frames looped back to the link since loopback was last started.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciLbLocalTotalBytes 1.3.6.1.4.1.562.36.2.1.70.5.5.10.1.2
This attribute records the number of bytes looped back to the link since loopback mode was started.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciLbLocalFecnFrm 1.3.6.1.4.1.562.36.2.1.70.5.5.10.1.3
This attribute records the number of frames with the Forward Explicit Congestion Notification (FECN) bit set, looped back to the link since the loopback mode was started.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciLbLocalBecnFrm 1.3.6.1.4.1.562.36.2.1.70.5.5.10.1.4
This attribute records the number of frames with the Backward Explicit Congestion Notification (BECN) bit set, looped back to the link since the loopback mode was started.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciLbLocalDeFrm 1.3.6.1.4.1.562.36.2.1.70.5.5.10.1.5
This attribute records the number of frames with the Discard Eligibility (DE) bit set, looped back to the link since the loopback mode was started.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciLbLocalDeBytes 1.3.6.1.4.1.562.36.2.1.70.5.5.10.1.6
This attribute records the number of bytes in frames with the Discard Eligibility (DE) bit set, looped back to the link since the loopback mode was started.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciLbRemoteTotalFrm 1.3.6.1.4.1.562.36.2.1.70.5.5.10.1.7
This attribute records the number of frames looped back to the subnet since loopback was last started.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciLbRemoteTotalBytes 1.3.6.1.4.1.562.36.2.1.70.5.5.10.1.8
This attribute records the number of bytes looped back to the subnet since loopback was last started.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciLbRemoteFecnFrm 1.3.6.1.4.1.562.36.2.1.70.5.5.10.1.9
This attribute records the number of frames with the Forward Explicit Congestion Notification (FECN) bit set, looped back to the subnet since the loopback mode was started.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciLbRemoteBecnFrm 1.3.6.1.4.1.562.36.2.1.70.5.5.10.1.10
This attribute records the number of frames with the Backward Explicit Congestion Notification (BECN) bit set, looped back to the subnet since the loopback mode was started.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciLbRemoteDeFrm 1.3.6.1.4.1.562.36.2.1.70.5.5.10.1.13
This attribute records the number of frames with the Discard Eligibility (DE) bit set, looped back to the subnet since the loopback mode was started.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciLbRemoteDeBytes 1.3.6.1.4.1.562.36.2.1.70.5.5.10.1.14
This attribute records the number of bytes in frames with the Discard Eligibility (DE) bit set, looped back to the subnet since the loopback mode was started.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciEgressSp 1.3.6.1.4.1.562.36.2.1.70.5.6
OBJECT IDENTIFIER    

mscFrNniDlciEgressSpRowStatusTable 1.3.6.1.4.1.562.36.2.1.70.5.6.1
This entry controls the addition and deletion of mscFrNniDlciEgressSp components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniDlciEgressSpRowStatusEntry

mscFrNniDlciEgressSpRowStatusEntry 1.3.6.1.4.1.562.36.2.1.70.5.6.1.1
A single entry in the table represents a single mscFrNniDlciEgressSp component.
OBJECT-TYPE    
  MscFrNniDlciEgressSpRowStatusEntry  

mscFrNniDlciEgressSpRowStatus 1.3.6.1.4.1.562.36.2.1.70.5.6.1.1.1
This variable is used as the basis for SNMP naming of mscFrNniDlciEgressSp components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscFrNniDlciEgressSpComponentName 1.3.6.1.4.1.562.36.2.1.70.5.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrNniDlciEgressSpStorageType 1.3.6.1.4.1.562.36.2.1.70.5.6.1.1.4
This variable represents the storage type value for the mscFrNniDlciEgressSp tables.
OBJECT-TYPE    
  StorageType  

mscFrNniDlciEgressSpIndex 1.3.6.1.4.1.562.36.2.1.70.5.6.1.1.10
This variable represents the index for the mscFrNniDlciEgressSp tables.
OBJECT-TYPE    
  NonReplicated  

mscFrNniDlciEgressSpProvTable 1.3.6.1.4.1.562.36.2.1.70.5.6.10
This group contains the provisionable attributes for this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniDlciEgressSpProvEntry

mscFrNniDlciEgressSpProvEntry 1.3.6.1.4.1.562.36.2.1.70.5.6.10.1
An entry in the mscFrNniDlciEgressSpProvTable.
OBJECT-TYPE    
  MscFrNniDlciEgressSpProvEntry  

mscFrNniDlciEgressSpCommittedInformationRate 1.3.6.1.4.1.562.36.2.1.70.5.6.10.1.1
This attribute specifies the committed information rate (CIR) for the egress direction. It is used for Call Admission Control (CAC) at the egress link. If the value is set to sameAsSp, the value of this attribute is the same as the committedInformationRate attribute under the ServiceParameters component. VALUES ( 50000001 = sameAsServiceParameters )
OBJECT-TYPE    
  Unsigned32 0..50000000 | 50000001  

mscFrNniDlciEgressSpCommittedBurstSize 1.3.6.1.4.1.562.36.2.1.70.5.6.10.1.2
This attribute specifies the committed burst size (Bc) for the egress direction. It is used for performing Call Admission Control (CAC) at the egress link. If the value is set to sameAsSp, the value of this attribute is the same as the committedBurstSize attribute under the ServiceParameters component. VALUES ( 50000001 = sameAsServiceParameters )
OBJECT-TYPE    
  Unsigned32 0..50000000 | 50000001  

mscFrNniDlciEgressSpExcessBurstSize 1.3.6.1.4.1.562.36.2.1.70.5.6.10.1.3
This attribute specifies the excess burst size (Be) for the egress direction. It is used for Call Admission Control (CAC) function towards the egress link. If the value is set to sameAsSp, the value of this attribute is the same as the excessBurstSize attribute under the ServiceParameters component. VALUES ( 50000001 = sameAsServiceParameters )
OBJECT-TYPE    
  Unsigned32 0..50000000 | 50000001  

mscFrNniDlciEgressSpMeasurementInterval 1.3.6.1.4.1.562.36.2.1.70.5.6.10.1.4
This attribute specifies the time interval over which rates and burst sizes are measured in the egress direction. It is used for bandwidth reservation for Call Admission Control (CAC) towards the egress link. If the value is set to sameAsSp, the value of this attribute is the same as the measurementInterval attribute under the ServiceParameters component. VALUES ( 25501 = sameAsServiceParameters )
OBJECT-TYPE    
  Unsigned32 0..25500 | 25501  

mscFrNniDlciStateTable 1.3.6.1.4.1.562.36.2.1.70.5.10
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniDlciStateEntry

mscFrNniDlciStateEntry 1.3.6.1.4.1.562.36.2.1.70.5.10.1
An entry in the mscFrNniDlciStateTable.
OBJECT-TYPE    
  MscFrNniDlciStateEntry  

mscFrNniDlciAdminState 1.3.6.1.4.1.562.36.2.1.70.5.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscFrNniDlciOperationalState 1.3.6.1.4.1.562.36.2.1.70.5.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscFrNniDlciUsageState 1.3.6.1.4.1.562.36.2.1.70.5.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscFrNniDlciAvailabilityStatus 1.3.6.1.4.1.562.36.2.1.70.5.10.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

mscFrNniDlciProceduralStatus 1.3.6.1.4.1.562.36.2.1.70.5.10.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscFrNniDlciControlStatus 1.3.6.1.4.1.562.36.2.1.70.5.10.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscFrNniDlciAlarmStatus 1.3.6.1.4.1.562.36.2.1.70.5.10.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscFrNniDlciStandbyStatus 1.3.6.1.4.1.562.36.2.1.70.5.10.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

mscFrNniDlciUnknownStatus 1.3.6.1.4.1.562.36.2.1.70.5.10.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

mscFrNniDlciAbitTable 1.3.6.1.4.1.562.36.2.1.70.5.12
This group contains the A-Bit status information for this Data Link Connection Identifier.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniDlciAbitEntry

mscFrNniDlciAbitEntry 1.3.6.1.4.1.562.36.2.1.70.5.12.1
An entry in the mscFrNniDlciAbitTable.
OBJECT-TYPE    
  MscFrNniDlciAbitEntry  

mscFrNniDlciABitStatusToIf 1.3.6.1.4.1.562.36.2.1.70.5.12.1.1
This attribute is the most recent A-bit status sent to the interface. The A-bit status is part of the LMI protocol, and indicates willingness to accept data from the local interface. inactive - the Frame Relay service discards all data offered from the local interface. active - the Frame Relay service tries to process all data offered from the local interface. notApplicable - the DLCI is switched, so this attribute is ignored.
OBJECT-TYPE    
  INTEGER inactive(0), active(1), notApplicable(2)  

mscFrNniDlciABitReasonToIf 1.3.6.1.4.1.562.36.2.1.70.5.12.1.2
This attribute provides the reason (if any) for an inactive status to be sent to the interface. This reason is notApplicable for an active status.
OBJECT-TYPE    
  INTEGER notApplicable(0), remoteUserSignaled(1), localLmiError(2), remoteLmiError(3), localLinkDown(4), remoteLinkDown(5), pvcSpvcDown(6), userNotAuthorized(8), resourceNotAvailable(9), dlciCollisionAtNni(10)  

mscFrNniDlciABitStatusFromIf 1.3.6.1.4.1.562.36.2.1.70.5.12.1.3
This attribute is the most recent A-Bit status received from the interface. inactive - the Frame Relay service informs the remote DLCI not to send user data to this interface. active - the Frame Relay service informs the remote DLCI that it is okay to send user data to this interface. notApplicable - the DLCI is switched, so this attribute is ignored.
OBJECT-TYPE    
  INTEGER inactive(0), active(1), notApplicable(2)  

mscFrNniDlciABitReasonFromIf 1.3.6.1.4.1.562.36.2.1.70.5.12.1.4
This attribute provides the reason (if any) for an inactive status to be sent to the subnet. This reason is notApplicable for an active status.
OBJECT-TYPE    
  INTEGER notApplicable(0), remoteUserSignaled(1), localLmiError(2), localLinkDown(4), missingFromLmiReport(7)  

mscFrNniDlciLoopbackState 1.3.6.1.4.1.562.36.2.1.70.5.12.1.5
This attribute has the value on when the DLCI is in loopback mode and off otherwise. The loopback command verbs start and stop are used to initiate and terminate the loopback mode for a DLCI. While loopbackState is on, the local LMI will report to the interface the A- bit status as active. Also an active A-bit signal will be reliably propagated across the subnet to the remote DLCI.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscFrNniDlciSpOpTable 1.3.6.1.4.1.562.36.2.1.70.5.13
This group defines the service and traffic parameters specific to this instance of DLCI. In the case of permanent (PVC and P-SPVC) DLCIs, the values of attributes with the exception of the measurementInterval reflect the provisioning under the FrNni Dlci Sp component. In the case of switched (SVC and S-SPVC) DLCIs, the values of attributes reflect the service parameter negotiations between what is provisioned under the FrNni Sig component and the signaled parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniDlciSpOpEntry

mscFrNniDlciSpOpEntry 1.3.6.1.4.1.562.36.2.1.70.5.13.1
An entry in the mscFrNniDlciSpOpTable.
OBJECT-TYPE    
  MscFrNniDlciSpOpEntry  

mscFrNniDlciMaximumFrameSize 1.3.6.1.4.1.562.36.2.1.70.5.13.1.1
This attribute indicates the maximum number of octets which may be included in the information field. The frame relay header and CRC octets are not included in this definition. This attribute corresponds to the dN1 parameter described in the Vendor Forum Specification.
OBJECT-TYPE    
  Unsigned32 1..8187  

mscFrNniDlciRateEnforcement 1.3.6.1.4.1.562.36.2.1.70.5.13.1.2
This attribute is obsolete. It provided the information which is now represented by the provisionable attribute rateEnforcement under the ServiceParameters component.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscFrNniDlciCommittedInformationRate 1.3.6.1.4.1.562.36.2.1.70.5.13.1.3
This attribute indicates the committed information rate (CIR) in bits per second (bit/s). When rateEnforcement is set to on, cir is the rate at which the network agrees to transfer information under normal conditions. This rate is measured over a measurement interval (t) that is determined internally based on CIR and the committed burst size (Bc). An exception to this occurs when CIR is provisioned to be zero, in which case the measurement interval (t) must be provisioned explicitly. This attribute should be ignored when rateEnforcement is off.
OBJECT-TYPE    
  Unsigned32 0..2048000  

mscFrNniDlciCommittedBurstSize 1.3.6.1.4.1.562.36.2.1.70.5.13.1.4
This attribute indicates the committed burst size (Bc) in bits. bc is the amount of data that a network agrees to transfer under normal conditions over a measurement interval (t). Data marked DE=1 is not accounted for in Bc. This attribute should be ignored when rateEnforcement is off.
OBJECT-TYPE    
  Unsigned32 0..2048000  

mscFrNniDlciExcessBurstSize 1.3.6.1.4.1.562.36.2.1.70.5.13.1.5
This attribute indicates the excess burst size (Be) in bits. Be is the amount of uncommitted data that the network will attempt to deliver over measurement interval T. Data marked DE=1 by the user or by the network is accounted for here. This attribute should be ignored when rateEnforcement is off.
OBJECT-TYPE    
  Unsigned32 0..2048000  

mscFrNniDlciMeasurementInterval 1.3.6.1.4.1.562.36.2.1.70.5.13.1.6
This attribute indicates the time interval (in milliseconds) over which rates and burst sizes are measured. This attribute should be ignored when rateEnforcement is off.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciRateAdaptation 1.3.6.1.4.1.562.36.2.1.70.5.13.1.7
This attribute is obsolete. It provided the information which is now represented by the provisionable attribute rateAdaptation under the ServiceParameters component.
OBJECT-TYPE    
  INTEGER off(0), on(1), eirOnly(2)  

mscFrNniDlciAccounting 1.3.6.1.4.1.562.36.2.1.70.5.13.1.8
This attribute indicates whether accounting data collection and record generation is turned on at this DLCI. For accounting data collection and record generation to be turned on, the accountingOn bit and at least one of the accountCollection bits in the DataNetworkAddress component must be set to on.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscFrNniDlciEmissionPriorityToIf 1.3.6.1.4.1.562.36.2.1.70.5.13.1.9
This attribute indicates the emission priority of frames sent to the interface. A larger value denotes a higher priority.
OBJECT-TYPE    
  INTEGER 0 | 1 | 2 | 3  

mscFrNniDlciTransferPriToNwk 1.3.6.1.4.1.562.36.2.1.70.5.13.1.10
This attribute indicates the priority at which data is transferred to the network. The transfer priority is a preference configured for an application according to its delay-sensitivity requirement. Frames with higher transfer priority are served by the network before the frames with lower priority. The transfer priority standard is defined to have 16 indices from 0 to 15. Each transfer priority n, where n specifies the transfer priority index, contains a default setting for routing class of service (multimedia, delay, or throughput) and frame relay egress queue (depending on the number of supported egress queues on the remote end interface) specified by the routingClassOfService and emissionPriority attributes provisioned in the Mod Frs DprsNet Tpm/n component. The default mapping can be altered by a user if required.
OBJECT-TYPE    
  Unsigned32 0..15  

mscFrNniDlciTransferPriFromNwk 1.3.6.1.4.1.562.36.2.1.70.5.13.1.11
This attribute indicates the priority at which data is transferred from the network. The transfer priority is a preference configured for an application according to its delay-sensitivity requirement. Frames with higher transfer priority are served by the network before the frames with lower priority. The transfer priority standard is defined to have 16 indices from 0 to 15. Each transfer priority n, where n specifies the transfer priority index, contains a default setting for routing class of service (multimedia, delay, or throughput) and frame relay egress queue (depending on the number of supported egress queues on the remote end interface) specified by the routingClassOfService and emissionPriority attributes provisioned in the Mod Frs DprsNet Tpm/n component. The default mapping can be altered by a user if required.
OBJECT-TYPE    
  Unsigned32 0..15  

mscFrNniDlciStatsTable 1.3.6.1.4.1.562.36.2.1.70.5.14
This group contains the operational statistics for the Frame Relay Data Link Connection Identifier.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniDlciStatsEntry

mscFrNniDlciStatsEntry 1.3.6.1.4.1.562.36.2.1.70.5.14.1
An entry in the mscFrNniDlciStatsTable.
OBJECT-TYPE    
  MscFrNniDlciStatsEntry  

mscFrNniDlciFrmToIf 1.3.6.1.4.1.562.36.2.1.70.5.14.1.1
This attribute counts the frames sent out the interface. When the maximum count is reached the count wraps to zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciFecnFrmToIf 1.3.6.1.4.1.562.36.2.1.70.5.14.1.2
This attribute counts the frames sent to the interface with the Forward Explicit Congestion Notification (FECN) bit set. When the count reaches maximum it wraps to zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciBecnFrmToIf 1.3.6.1.4.1.562.36.2.1.70.5.14.1.3
This attribute counts the frames sent to the interface with the Backward Explicit Congestion Notification (BECN) bit set. When the count reaches maximum it wraps to zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciBciToSubnet 1.3.6.1.4.1.562.36.2.1.70.5.14.1.4
This attribute counts the frames sent into the local network with the Backward Congestion Indication (BCI) bit set. When the count reaches maximum it wraps to zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciDeFrmToIf 1.3.6.1.4.1.562.36.2.1.70.5.14.1.5
This attribute counts the frames sent to the interface with the Discard Eligibility (DE) bit set. When the count reaches maximum it wraps to zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciDiscCongestedToIf 1.3.6.1.4.1.562.36.2.1.70.5.14.1.6
This attribute counts the number of frame discards at the Frame Relay service due to local congestion in the direction toward the interface. When this count reaches maximum, it wraps to zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciDiscDeCongestedToIf 1.3.6.1.4.1.562.36.2.1.70.5.14.1.7
This attribute counts the number of discarded frames, with the Discard Eligibility (DE) bit set, at the Frame Relay service, due to local congestion in the direction toward the interface. When this count reaches maximum, it wraps to zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciFrmFromIf 1.3.6.1.4.1.562.36.2.1.70.5.14.1.8
This attribute counts the frames received from the interface. It includes the frames that are discarded due to error or excess. When the maximum count is reached the count wraps to zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciFecnFrmFromIf 1.3.6.1.4.1.562.36.2.1.70.5.14.1.9
This attribute counts the frames received from the interface with the Forward Explicit Congestion Notification (FECN) bit set. When the count reaches maximum it wraps to zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciBecnFrmFromIf 1.3.6.1.4.1.562.36.2.1.70.5.14.1.10
This attribute counts the frames received from the interface with the Backward Explicit Congestion Notification (BECN) bit set. When the count reaches maximum it wraps to zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciFciFromSubnet 1.3.6.1.4.1.562.36.2.1.70.5.14.1.11
This attribute counts the frames received from the network with the Forward Congestion Indication (FCI) bit set. When the count reaches maximum it wraps to zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciBciFromSubnet 1.3.6.1.4.1.562.36.2.1.70.5.14.1.12
This attribute counts the frames received from the network with the Backward Congestion Indication (BCI) bit set. When the count reaches maximum it wraps to zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciDeFrmFromIf 1.3.6.1.4.1.562.36.2.1.70.5.14.1.13
This attribute counts the frames received from the interface with the Discard Eligibility (DE) bit set. When the count reaches maximum it wraps to zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciExcessFrmFromIf 1.3.6.1.4.1.562.36.2.1.70.5.14.1.14
This attribute counts the frames received from the interface with the Discard Eligibility (DE) bit clear, but subsequently set by the network due to rate enforcement. When the count reaches maximum it wraps to zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciDiscExcessFromIf 1.3.6.1.4.1.562.36.2.1.70.5.14.1.15
This attribute counts the frames which were discarded due to rate enforcement. When the count reaches maximum it wraps to zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciDiscFrameAbit 1.3.6.1.4.1.562.36.2.1.70.5.14.1.16
This attribute counts the number of frame discards at the Frame Relay Service, due to an inactive PVC status, in the direction toward the local network. When this count reaches maximum, it wraps to zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciDiscCongestedFromIf 1.3.6.1.4.1.562.36.2.1.70.5.14.1.17
This attribute counts the number of frame discards at the Frame Relay service due to local congestion in the direction toward the network. When this count reaches maximum, it wraps to zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciDiscDeCongestedFromIf 1.3.6.1.4.1.562.36.2.1.70.5.14.1.18
This attribute counts the number of discarded frames, with the Discard Eligibility (DE) bit set, at the Frame Relay service, due to local congestion, in the direction toward the local network. When this count reaches maximum, it wraps to zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciErrorShortFrmFromIf 1.3.6.1.4.1.562.36.2.1.70.5.14.1.19
This attribute counts the frames received with 0 octets in the information field. When the count reaches maximum it wraps to zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciErrorLongFrmFromIf 1.3.6.1.4.1.562.36.2.1.70.5.14.1.20
This attribute counts the frames received with number of octets in the information field greater than the subscribed maximum. When the count reaches maximum it wraps to zero. Frames whose lengths are greater than the hardware receive buffer are ignored by the hardware and are therefore not included in this count.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciBecnFrmSetByService 1.3.6.1.4.1.562.36.2.1.70.5.14.1.21
This attribute counts the number of frames with BECN set by the Frame Relay service. It is incremented whenever the Frame Relay service sets BECN on a frame upon detecting local congestion. This count is incremented regardless of whether the frame already bears a set BECN bit since its use is to determine the place of congestion. When the count reaches maximum, it wraps to zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciBytesToIf 1.3.6.1.4.1.562.36.2.1.70.5.14.1.22
This attribute counts the bytes sent out the interface. When the maximum count is reached the count wraps to zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciDeBytesToIf 1.3.6.1.4.1.562.36.2.1.70.5.14.1.23
This attribute counts the bytes sent to the interface with the Discard Eligibility (DE) bit set. When the count reaches maximum it wraps to zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciDiscCongestedToIfBytes 1.3.6.1.4.1.562.36.2.1.70.5.14.1.24
This attribute counts the number of byte discards at the Frame Relay service due to local congestion in the direction toward the link. When this count reaches maximum, it wraps to zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciDiscDeCongestedToIfBytes 1.3.6.1.4.1.562.36.2.1.70.5.14.1.25
This attribute counts the number of discard eligible (DE=1) byte discards at the Frame Relay service due to local congestion in the direction toward the link. When the maximum count is reached the count wraps to zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciBytesFromIf 1.3.6.1.4.1.562.36.2.1.70.5.14.1.26
This attribute counts the bytes received from the interface. Bytes that are discarded due to error or excess are not counted. When the maximum count is reached the count wraps to zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciDeBytesFromIf 1.3.6.1.4.1.562.36.2.1.70.5.14.1.27
This attribute counts the bytes received from the interface with the Discard Eligibility (DE) bit set. When the count reaches maximum it wraps to zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciExcessBytesFromIf 1.3.6.1.4.1.562.36.2.1.70.5.14.1.28
This attribute counts the bytes received from the interface with the Discard Eligibility (DE) bit clear, but subsequently set by the network due to rate enforcement. When the count reaches maximum it wraps to zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciDiscExcessFromIfBytes 1.3.6.1.4.1.562.36.2.1.70.5.14.1.29
This attribute counts the bytes which were discarded due to rate enforcement. When the count reaches maximum it wraps to zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciDiscByteAbit 1.3.6.1.4.1.562.36.2.1.70.5.14.1.30
This attribute counts the bytes which were discarded due to aBit turned off.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciDiscCongestedFromIfBytes 1.3.6.1.4.1.562.36.2.1.70.5.14.1.31
This attribute counts the number of byte discards at the Frame Relay service due to local congestion in the direction toward the network. When this count reaches maximum, it wraps to zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciDiscDeCongestedFromIfBytes 1.3.6.1.4.1.562.36.2.1.70.5.14.1.32
This attribute counts the number of discard eligible (DE=1) byte discards at the Frame Relay service due to local congestion in the direction toward the network. When the maximum count is reached the count wraps to zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciErrorShortBytesFromIf 1.3.6.1.4.1.562.36.2.1.70.5.14.1.33
This attribute counts the bytes received with 0 octets in the information field. When the count reaches maximum it wraps to zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciErrorLongBytesFromIf 1.3.6.1.4.1.562.36.2.1.70.5.14.1.34
This attribute counts the bytes received with number of octets in the information field greater than the subscribed maximum. When the count reaches maximum it wraps to zero. Bytes whose lengths are greater than the hardware receive buffer are ignored by the hardware and are therefore not included in this count.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciRateAdaptReduct 1.3.6.1.4.1.562.36.2.1.70.5.14.1.35
This attribute counts the number of rate reductions due to rate adaptation. Rate adaptation causes the allowed rate to be reduced in steps. After each reduction, a period of time is awaited before further action is taken. At the end of this period, the allowed rate is further reduced if congestion is still prevalent. When this count reaches maximum, it wraps to zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciRateAdaptReductPeriod 1.3.6.1.4.1.562.36.2.1.70.5.14.1.36
This attribute provides a cumulative count of the amount of time that rate adaptation procedures have been in effect. When this count reaches maximum, it wraps to zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciTransferPriorityToNetwork 1.3.6.1.4.1.562.36.2.1.70.5.14.1.37
This attribute is obsolete. It is replaced by attribute transferPriorityToNetwork under group FrsNniDataLinkConnectionIdentifierServiceParametersOp.
OBJECT-TYPE    
  INTEGER 0..15  

mscFrNniDlciTransferPriorityFromNetwork 1.3.6.1.4.1.562.36.2.1.70.5.14.1.38
This attribute is obsolete. It is replaced by attribute transferPriorityFromNetwork under group FrsNniDataLinkConnectionIdentifierServiceParametersOp.
OBJECT-TYPE    
  INTEGER 0..15  

mscFrNniDlciCirPresent 1.3.6.1.4.1.562.36.2.1.70.5.14.1.39
This attribute provides the actual Committed Information Rate (CIR) enforced for this DLCI. This number is in units of 800 bits/ sec, since that is the internal resolution of Passport rate enforcement. If rateEnforcement is off, then this number does not have meaning. Normally, this attribute matches the provisioned CIR for the DLCI. But when Rate Adaptation is active, then this number will vary to represent the actual Allowed CIR at the moment that this attribute is collected.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciEirPresent 1.3.6.1.4.1.562.36.2.1.70.5.14.1.40
This attribute provides the actual Excess Information Rate (EIR) enforced for this DLCI. This number is in units of 800 bits/sec, since that is the internal resolution of Passport rate enforcement. If rateEnforcement is off, then this number does not have meaning. Normally, this attribute matches the provisioned EIR for the DLCI. But when Rate Adaptation is active, then this number will vary to represent the actual Allowed EIR at the moment that this attribute is collected.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciIntTable 1.3.6.1.4.1.562.36.2.1.70.5.15
This group contains the operational statistics for the Frame Relay Data Link Connection Identifier interval data (accounting data).
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniDlciIntEntry

mscFrNniDlciIntEntry 1.3.6.1.4.1.562.36.2.1.70.5.15.1
An entry in the mscFrNniDlciIntTable.
OBJECT-TYPE    
  MscFrNniDlciIntEntry  

mscFrNniDlciStartTime 1.3.6.1.4.1.562.36.2.1.70.5.15.1.1
This attribute indicates the start time of this interval period. If Vc spans 12 hour time or time of day change startTime reflects new time as recorded at 12 hour periods or time of day changes. A new interval period is started each time an accounting record is generated.
OBJECT-TYPE    
  EnterpriseDateAndTime SIZE(0 | 19)  

mscFrNniDlciTotalIngressBytes 1.3.6.1.4.1.562.36.2.1.70.5.15.1.2
This attribute counts the total bytes received from the interface since the start of the interval period. The start of the interval period is captured in the startTime attribute. The count is reset to zero when an accounting record is generated.
OBJECT-TYPE    
  Unsigned64 SIZE(8)  

mscFrNniDlciTotalEgressBytes 1.3.6.1.4.1.562.36.2.1.70.5.15.1.3
This attribute counts the total bytes sent to the interface since the start of the interval period. The start of the interval period is captured in the startTime attribute. The count is reset to zero when an accounting record is generated.
OBJECT-TYPE    
  Unsigned64 SIZE(8)  

mscFrNniDlciEirIngressBytes 1.3.6.1.4.1.562.36.2.1.70.5.15.1.4
This attribute counts the total bytes with the Discard Eligibility (DE) bit set sent to the subnet since the start of the interval period. The start of the interval period is captured in the startTime attribute. The count is reset to zero when an accounting record is generated.
OBJECT-TYPE    
  Unsigned64 SIZE(8)  

mscFrNniDlciEirEgressBytes 1.3.6.1.4.1.562.36.2.1.70.5.15.1.5
This attribute counts the total bytes with the Discard Eligibility (DE) bit set sent to the interface since the start of the interval period. The start of the interval period is captured in the startTime attribute. The count is reset to zero when an accounting record is generated.
OBJECT-TYPE    
  Unsigned64 SIZE(8)  

mscFrNniDlciDiscardedBytes 1.3.6.1.4.1.562.36.2.1.70.5.15.1.6
This attribute counts the total bytes in invalid frames received from the interface and discarded at the DLCI since the start of the interval period. This count is a sum of octets in frames discarded due to the number of octets in the information field greater than the subscribed maximum or equal to 0, due to aBit turned off, or due to rate enforcement. The start of the interval period is captured in the startTime attribute. The count is reset to zero when an accounting record is generated.
OBJECT-TYPE    
  Unsigned64 SIZE(8)  

mscFrNniDlciTotalIngressSegFrm 1.3.6.1.4.1.562.36.2.1.70.5.15.1.7
If the value of the unitsCounted attribute in moduleData component is segments, this attribute counts the total number of segments in frames received from the interface since the start of the interval period. If the value of the unitsCounted attribute in moduleData component is frames, this attribute counts the total number of frames received from the interface since the start of the interval period. The start of the interval period is captured in the startTime attribute. The count is reset to zero when an accounting record is generated.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciTotalEgressSegFrm 1.3.6.1.4.1.562.36.2.1.70.5.15.1.8
If the value of the unitsCounted attribute in moduleData component is segments, this attribute counts the total number of segments in frames sent to the interface since the start of the interval period. If the value of the unitsCounted attribute in moduleData component is frames, this attribute counts the total number of frames sent to the interface since the start of the interval period. The start of the interval period is captured in the startTime attribute. The count is reset to zero when an accounting record is generated.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciEirIngressSegFrm 1.3.6.1.4.1.562.36.2.1.70.5.15.1.9
If the value of the unitsCounted attribute in moduleData component is segments, this attribute counts the number of segments in frames with the Discard Eligibility (DE) bit set sent to the subnet since the start of the interval period. If the value of the unitsCounted attribute in moduleData component is frames, this attribute counts the number of frames with the Discard Eligibility (DE) bit set sent to the subnet since the start of the interval period. The start of the interval period is captured in the startTime attribute. The count is reset to zero when an accounting record is generated.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciEirEgressSegFrm 1.3.6.1.4.1.562.36.2.1.70.5.15.1.10
If the value of the unitsCounted attribute in moduleData component is segments, this attribute counts the number of segments in frames with the Discard Eligibility (DE) bit set sent to the interface since the start of the interval period. If the value of the unitsCounted attribute in moduleData component is frames, this attribute counts the number of frames with the Discard Eligibility (DE) bit set sent to the interface since the start of the interval period. The start of the interval period is captured in the startTime attribute. The count is reset to zero when an accounting record is generated
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciDiscardedSegFrm 1.3.6.1.4.1.562.36.2.1.70.5.15.1.11
If the value of the unitsCounted attribute in moduleData component is segments, this attribute counts the number of segments in invalid frames received from the interface and discarded at the DLCI. If the value of the unitsCounted attribute in moduleData component is frames, this attribute counts the number of invalid frames received from the interface and discarded at the DLCI. Segments of frames are counted since the start of the interval period. The count is reset to zero when an accounting record is generated. The count is a sum of segments in frames or frames discarded due to the number of octets in the information field greater than the subscribed maximum or equal to 0, due to aBit turned off, or due to rate enforcement.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciCirPresentObs 1.3.6.1.4.1.562.36.2.1.70.5.15.1.12
This attribute has moved to the statistics subgroup. See cirPresent..
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciEirPresentObs 1.3.6.1.4.1.562.36.2.1.70.5.15.1.13
This attribute has moved to the statistics group. See eirPresent.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciRateEnforcementPresent 1.3.6.1.4.1.562.36.2.1.70.5.15.1.14
This attribute is obsolete. See the provisionable rateEnforcement attribute.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscFrNniDlciRateAdaptationPresent 1.3.6.1.4.1.562.36.2.1.70.5.15.1.15
This attribute is obsolete. See the provisionable rateAdaptation attribute.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscFrNniDlciLocalRateAdaptOccurred 1.3.6.1.4.1.562.36.2.1.70.5.15.1.16
This attribute indicates whether rate adaptation has occurred on this user Data Link Connection on this Frame Relay interface. The value is set to no when an accounting record is generated.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscFrNniDlciCallReferenceNumber 1.3.6.1.4.1.562.36.2.1.70.5.15.1.17
This attribute is obsoleted and replaced by callRefNumber.
OBJECT-TYPE    
  Hex 0..16777215  

mscFrNniDlciElapsedDifference 1.3.6.1.4.1.562.36.2.1.70.5.15.1.18
This attribute indicates the elapsed time representing the period of this interval data. It is elapsed time in 0.1 second increments since the call started.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciCallRefNumber 1.3.6.1.4.1.562.36.2.1.70.5.15.1.20
This attribute indicates the call reference number which is a unique number generated by the switch. The same Call Reference Number is stored in the interval data (accounting record) at both ends of the call. It can be used as one of the attributes in matching duplicate records generated at each end of the connection.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniDlciCalldTable 1.3.6.1.4.1.562.36.2.1.70.5.16
This group of attributes describes the characteristics of the call such as call type and call state.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniDlciCalldEntry

mscFrNniDlciCalldEntry 1.3.6.1.4.1.562.36.2.1.70.5.16.1
An entry in the mscFrNniDlciCalldTable.
OBJECT-TYPE    
  MscFrNniDlciCalldEntry  

mscFrNniDlciCallType 1.3.6.1.4.1.562.36.2.1.70.5.16.1.1
This attribute indicates whether this DLCI is a permancent virtual circuit (PVC), a switched virtual circuit (SVC), or a switched permament virtual circuit (SPVC).
OBJECT-TYPE    
  INTEGER pvc(0), svc(1), spvc(2)  

mscFrNniDlciCallState 1.3.6.1.4.1.562.36.2.1.70.5.16.1.2
This attribute indicates the FRF.10 state of a switched call. The value of this attribute for a permanent (PVC and P-SPVC) DLCI is always notApplicable. In the description that follows, 'calling STE' refers to the network who has initiated the SETUP request, and 'called STE' refers to the network that receives the request. State description: In the null state, the network has neither received nor sent call setup requests for this DLCI. In the callInitiated state, the called STE has received a SETUP message from the calling STE. In the callProceedingSent state, the called STE has sent a CALL PROCEEDING message to the calling STE in response to the SETUP message. In the callPresent state, the calling STE has sent a SETUP message to the called STE but has not received a response. In the callProceedingReceived state, the calling STE has received a CALL PROCEEDING message from the called STE in response to a SETUP message. In the active state, either the called STE has sent a CONNECT message to the calling STE, or the calling STE has received a CONNECT from the called STE. In the releaseRequest state, the STE has sent a RELEASE message to release the call and is waiting for a RELEASE COMPLETE message. In the releaseIndication state, the STE has received a RELEASE and sends a RELEASE COMPLETE message after releasing the relevant call resources. In the restartRequest state, the STE has sent a RESTART request to the other STE and is waiting for an acknowledgement. In the restart state, the STE has received a request for a restart from the other STE and this STE has not returned an acknowledgement.
OBJECT-TYPE    
  INTEGER null(0), callInitiated(1), callProceedingSent(3), callPresent(6), callProceedingReceived(9), active(10), releaseRequest(11), releaseIndication(12), notApplicable(20), restartRequest(61), restart(62)  

mscFrNniDlciCallReference 1.3.6.1.4.1.562.36.2.1.70.5.16.1.3
This attribute indicates the FRF.10 call reference number associated with this DLCI. The value of this attribute for a provisioned (PVC or P-SPVC) DLCI is always 0.
OBJECT-TYPE    
  Unsigned32 0..32767  

mscFrNniVFramer 1.3.6.1.4.1.562.36.2.1.70.6
OBJECT IDENTIFIER    

mscFrNniVFramerRowStatusTable 1.3.6.1.4.1.562.36.2.1.70.6.1
This entry controls the addition and deletion of mscFrNniVFramer components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniVFramerRowStatusEntry

mscFrNniVFramerRowStatusEntry 1.3.6.1.4.1.562.36.2.1.70.6.1.1
A single entry in the table represents a single mscFrNniVFramer component.
OBJECT-TYPE    
  MscFrNniVFramerRowStatusEntry  

mscFrNniVFramerRowStatus 1.3.6.1.4.1.562.36.2.1.70.6.1.1.1
This variable is used as the basis for SNMP naming of mscFrNniVFramer components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscFrNniVFramerComponentName 1.3.6.1.4.1.562.36.2.1.70.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrNniVFramerStorageType 1.3.6.1.4.1.562.36.2.1.70.6.1.1.4
This variable represents the storage type value for the mscFrNniVFramer tables.
OBJECT-TYPE    
  StorageType  

mscFrNniVFramerIndex 1.3.6.1.4.1.562.36.2.1.70.6.1.1.10
This variable represents the index for the mscFrNniVFramer tables.
OBJECT-TYPE    
  NonReplicated  

mscFrNniVFramerProvTable 1.3.6.1.4.1.562.36.2.1.70.6.10
This group contains provisionable attributes for the VirtualFramer component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniVFramerProvEntry

mscFrNniVFramerProvEntry 1.3.6.1.4.1.562.36.2.1.70.6.10.1
An entry in the mscFrNniVFramerProvTable.
OBJECT-TYPE    
  MscFrNniVFramerProvEntry  

mscFrNniVFramerOtherVirtualFramer 1.3.6.1.4.1.562.36.2.1.70.6.10.1.1
This attribute specifies the other VirtualFramer to which the service is linked, for example, FrUni/n VirtualFramer, FrDte/n VirtualFramer.
OBJECT-TYPE    
  Link  

mscFrNniVFramerLogicalProcessor 1.3.6.1.4.1.562.36.2.1.70.6.10.1.2
This attribute specifies the logical processor on which the service component will reside.
OBJECT-TYPE    
  Link  

mscFrNniVFramerStateTable 1.3.6.1.4.1.562.36.2.1.70.6.11
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniVFramerStateEntry

mscFrNniVFramerStateEntry 1.3.6.1.4.1.562.36.2.1.70.6.11.1
An entry in the mscFrNniVFramerStateTable.
OBJECT-TYPE    
  MscFrNniVFramerStateEntry  

mscFrNniVFramerAdminState 1.3.6.1.4.1.562.36.2.1.70.6.11.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscFrNniVFramerOperationalState 1.3.6.1.4.1.562.36.2.1.70.6.11.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscFrNniVFramerUsageState 1.3.6.1.4.1.562.36.2.1.70.6.11.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscFrNniVFramerStatsTable 1.3.6.1.4.1.562.36.2.1.70.6.12
This group contains the operational statistics data for a VirtualFramer component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniVFramerStatsEntry

mscFrNniVFramerStatsEntry 1.3.6.1.4.1.562.36.2.1.70.6.12.1
An entry in the mscFrNniVFramerStatsTable.
OBJECT-TYPE    
  MscFrNniVFramerStatsEntry  

mscFrNniVFramerFrmToOtherVFramer 1.3.6.1.4.1.562.36.2.1.70.6.12.1.2
This attribute counts the frames transmitted to the otherVirtualFramer.
OBJECT-TYPE    
  PassportCounter64  

mscFrNniVFramerFrmFromOtherVFramer 1.3.6.1.4.1.562.36.2.1.70.6.12.1.3
This attribute counts the frames received from the otherVirtualFramer.
OBJECT-TYPE    
  PassportCounter64  

mscFrNniVFramerOctetFromOtherVFramer 1.3.6.1.4.1.562.36.2.1.70.6.12.1.5
This attribute counts the octets received from the otherVirtualFramer.
OBJECT-TYPE    
  PassportCounter64  

mscFrNniSig 1.3.6.1.4.1.562.36.2.1.70.8
OBJECT IDENTIFIER    

mscFrNniSigRowStatusTable 1.3.6.1.4.1.562.36.2.1.70.8.1
This entry controls the addition and deletion of mscFrNniSig components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniSigRowStatusEntry

mscFrNniSigRowStatusEntry 1.3.6.1.4.1.562.36.2.1.70.8.1.1
A single entry in the table represents a single mscFrNniSig component.
OBJECT-TYPE    
  MscFrNniSigRowStatusEntry  

mscFrNniSigRowStatus 1.3.6.1.4.1.562.36.2.1.70.8.1.1.1
This variable is used as the basis for SNMP naming of mscFrNniSig components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscFrNniSigComponentName 1.3.6.1.4.1.562.36.2.1.70.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrNniSigStorageType 1.3.6.1.4.1.562.36.2.1.70.8.1.1.4
This variable represents the storage type value for the mscFrNniSig tables.
OBJECT-TYPE    
  StorageType  

mscFrNniSigIndex 1.3.6.1.4.1.562.36.2.1.70.8.1.1.10
This variable represents the index for the mscFrNniSig tables.
OBJECT-TYPE    
  NonReplicated  

mscFrNniSigProvTable 1.3.6.1.4.1.562.36.2.1.70.8.11
This group contains common provisionable attributes for signaling at the interface.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniSigProvEntry

mscFrNniSigProvEntry 1.3.6.1.4.1.562.36.2.1.70.8.11.1
An entry in the mscFrNniSigProvTable.
OBJECT-TYPE    
  MscFrNniSigProvEntry  

mscFrNniSigDlciAllocation 1.3.6.1.4.1.562.36.2.1.70.8.11.1.3
This attribute specifies the order in which DLCIs are dynamically allocated for SVCs. The purpose of this attribute is to prevent DLCI collisions between SVCs initiated by two FrNni interfaces talking to each other. This is achieved by provisioning a different value for this attribute at each end of the NNI link. A value of fromLowEnd specifies that the DLCI number assignment for SVC connections is initiated from the lowest value of the range (that is, highestPvcDlci+1 up to 1007). A value of fromHighEnd specifies that the DLCI number assignment for SVC connections is initiated from the highest value of the range (that is, 1007 down to highestPvcDlci+1).
OBJECT-TYPE    
  INTEGER fromLowEnd(0), fromHighEnd(1)  

mscFrNniSigHighestPermanentDlci 1.3.6.1.4.1.562.36.2.1.70.8.11.1.4
This attribute specifies the highest DLCI value that can be provisioned for a permanent connection. It partitions the DLCI space into permanent and switched connections. Permanent DLCI numbers higher than this value cannot be provisioned. The value 0 is used to indicate that no permanent connections are allowed on this interface. The value 1007 indicates that no switched connections are allowed on this interface.
OBJECT-TYPE    
  Unsigned32 0 | 16..1007  

mscFrNniSigHighestPvcDlci 1.3.6.1.4.1.562.36.2.1.70.8.11.1.5
This attribute specifies the highest DLCI value that can be provisioned for a permanent connection. It partitions the DLCI space into permanent and switched connections. Permanent DLCI numbers higher than this value cannot be provisioned. The value 0 is used to indicate that no permanent connections are allowed on this interface. The value 1007 indicates that no switched connections are allowed on this interface.
OBJECT-TYPE    
  Unsigned32 0 | 16..1007  

mscFrNniSigServParmsTable 1.3.6.1.4.1.562.36.2.1.70.8.12
This group contains the provisionable service parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniSigServParmsEntry

mscFrNniSigServParmsEntry 1.3.6.1.4.1.562.36.2.1.70.8.12.1
An entry in the mscFrNniSigServParmsTable.
OBJECT-TYPE    
  MscFrNniSigServParmsEntry  

mscFrNniSigMaximumFrameSize 1.3.6.1.4.1.562.36.2.1.70.8.12.1.1
This attribute specifies the maximum number of octets that may be included in the information field of the user DLCI of any switched connections using this interface. Its value must not be smaller than the value of defaultMaximumFrameSize.
OBJECT-TYPE    
  Unsigned32 1..8187  

mscFrNniSigDefaultMaximumFrameSize 1.3.6.1.4.1.562.36.2.1.70.8.12.1.2
This attribute specifies the default maximum number of octets that may be included in the information field of the user DLCI assigned for any switched connections using this interface. This value is used during call parameter negotiation for switched calls on this interface when the maximum frame size is not specified in the user's SETUP message. The value of this attribute must not exceed the value of the maximumFrameSize attribute.
OBJECT-TYPE    
  Unsigned32 1..8187  

mscFrNniSigDefaultCommittedInformationRate 1.3.6.1.4.1.562.36.2.1.70.8.12.1.3
This attribute specifies the default user to network direction CIR. This value is used during call parameter negotiation for switched calls on this interface when the CIR is not specified in the user's SETUP message.
OBJECT-TYPE    
  Unsigned32 0..52000000  

mscFrNniSigDefaultCommittedBurstSize 1.3.6.1.4.1.562.36.2.1.70.8.12.1.4
This attribute specifies the default user to network direction Bc. This value is used during call parameter negotiation for switched calls on this interface when the Bc is not specified in the user's SETUP message.
OBJECT-TYPE    
  Unsigned32 0..52000000  

mscFrNniSigDefaultExcessBurstSize 1.3.6.1.4.1.562.36.2.1.70.8.12.1.5
This attribute specifies the default user to network direction Be. This value is used during call parameter negotiation for switched calls on this interface when the Be is not specified in the user's SETUP message.
OBJECT-TYPE    
  Unsigned32 0..52000000  

mscFrNniSigRateEnforcement 1.3.6.1.4.1.562.36.2.1.70.8.12.1.6
This attribute specifies whether rate enforcement is in effect for SVCs on this interface.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscFrNniSigRateAdaptation 1.3.6.1.4.1.562.36.2.1.70.8.12.1.7
This attribute specifies whether closed-loop rate adaptation is in effect for SVCs on this interface. Rate adaptation is a feature that, in periods of congestion, adapts the rate at which the user is allowed to send data into the network to that which the network is able to handle at that time. This proactive measure of handling congestion optimizes network resources by causing the ingress to discard frames that would otherwise be discarded in the network. If this attribute is set to on, then, at the onset of congestion, the excess information rate (EIR) is reduced to a very low rate. If congestion persists, then the allowed CIR is reduced geometrically by 25% of the current value at that time. The minimum to which CIR can be reduced is 1/16th (6.25%) of the provisioned value. As congestion alleviates, CIR is increased linearly by 6.25% of the provisioned value specified in committedInformationRate. If set to eirOnly, then rate adaptation will only apply to the excess information rate (EIR). At the onset of congestion, the allowed EIR is reduced by 25% of its provisioned value. If congestion persists, EIR is reduced geometrically by 25% of the current value at that time. As congestion alleviates, EIR is gradually increased linearly by 6.25% of the provisioned EIR. If set to cirProportionate, then rate adaptation will also only apply to the excess information rate (EIR). At the onset of congestion the initial allowed EIR is set to a multiple of the provisioned CIR. If congestion persists, the allowed EIR is reduced geometrically by 25% of the current value at that time. As congestion alleviates, EIR is gradually increased linearly by 6.25% of the provisioned EIR. Note that the allowed EIR may be set higher than the provisioned EIR, since it is calculated initially using another parameter, the provisioned CIR. If the allowed EIR at the moment is higher than the provisioned EIR, then the provisioned EIR is used instead. This attribute can only be set to on or eirOnly if rateEnforcement is set to on.
OBJECT-TYPE    
  INTEGER off(0), on(1), eirOnly(2), cirProportionate(3)  

mscFrNniSigRaSensitivity 1.3.6.1.4.1.562.36.2.1.70.8.12.1.8
This attribute specifies the sensitivity of the rate adaptation system for all switched connections on this interface. A higher number indicates a higher sensitivity and therefore a quicker reaction time to network conditions. A quicker reaction time allows the network to discard frames at the access and protect network resources, but can lead to false alarms and a greater fluctuation of the allowed rate. A higher setting therefore tends to favor the protection of the network over the allowed throughput of the user. A lower number indicates a lower sensitivity and therefore a slower reaction to network conditions. A slower reaction time results in a greater amount of user traffic allowed into the network, but can lead to a waste of network bandwidth since the traffic may be discarded at the congested resource. A lower setting therefore tends to favour the allowed throughput of the user over the protection of the network. This attribute is applicable for adapting EIR when rateAdaptation is eirOnly or cirProportionate, or CIR when rateAdaptation is on. This attribute is ignored if rateAdaptation is off.
OBJECT-TYPE    
  Unsigned32 1..20  

mscFrNniSigUpdateBCI 1.3.6.1.4.1.562.36.2.1.70.8.12.1.9
This attribute specifies whether internal Backward Congestion Indication (BCI) bits will report congestion external to the Passport network, as communicated through incoming BECN bits. If updateBCI is set to on, then BCI bits for incoming frames will be set if the BECN on the frame is set. If updateBCI is set to off, then incoming BECN bits has no effect. Setting updateBCI on for a DLCI means that the remote end of the DLCI, which is specified by the remoteDna and remoteDlci attributes of the Dc component of the Dlci, may perform Rate Adaptation using the flow of incoming BECN bits, in addition to internal Passport congestion management systems. If the rateAdaptation attribute of the remote DLCI is provisioned as eirOnly, cirProportionate, or on, then congestion from another network connected to a Passport network may trigger dynamic congestion management. If there is no rate adaptation at the other end, then the setting of updateBCI attribute here will have no effect.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscFrNniSigSysParmsTable 1.3.6.1.4.1.562.36.2.1.70.8.13
This group contains the provisionable FRF.10 system parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniSigSysParmsEntry

mscFrNniSigSysParmsEntry 1.3.6.1.4.1.562.36.2.1.70.8.13.1
An entry in the mscFrNniSigSysParmsTable.
OBJECT-TYPE    
  MscFrNniSigSysParmsEntry  

mscFrNniSigCallSetupTimer 1.3.6.1.4.1.562.36.2.1.70.8.13.1.1
This attribute specifies the time this interface waits for a response to the SETUP message sent to the adjacent network. Upon timer expiry, the SETUP message is retransmitted. The second expiry of this timer causes the call to be cleared.
OBJECT-TYPE    
  Unsigned32 1..255  

mscFrNniSigReleaseTimer 1.3.6.1.4.1.562.36.2.1.70.8.13.1.2
This attribute specifies the time this interface waits for a response to the RELEASE message sent to the adjacent network. Upon timer expiry, the RELEASE message is retransmitted. The second expiry of the timer causes the call to be released.
OBJECT-TYPE    
  Unsigned32 1..255  

mscFrNniSigCallProceedingTimer 1.3.6.1.4.1.562.36.2.1.70.8.13.1.3
This attribute specifies the time this interface waits for the CONNECT message from the adjacent network after the network has received the optional CALL PROCEEDING message from the adjacent network. Upon timer expiry, the call is cleared.
OBJECT-TYPE    
  Unsigned32 1..255  

mscFrNniSigRestartReqTimer 1.3.6.1.4.1.562.36.2.1.70.8.13.1.4
This attribute specifies the time this interface waits for the RESTART ACKNOWLEDGE message from the adjacent network after sending a first RESTART message. Upon timer expiry, another RESTART message is sent. After the second expiry, the interface is treated as idle. If the restartReqTimer attribute is set to the default value, then the interface is treated as idle when it receives an indication that the link is up and does not send a RESTART message.
OBJECT-TYPE    
  Unsigned32 0..255  

mscFrNniSigRestartRcvTimer 1.3.6.1.4.1.562.36.2.1.70.8.13.1.5
This attribute specifies the time this interface waits for the processing of a RESTART message received by the interface. Upon expiry of this timer, an alarm will be displayed to report the problem. The timer value must be less than the restartReqTimer provisioned value at the adjacent node.
OBJECT-TYPE    
  Unsigned32 1..255  

mscFrNniSigStatusEnqTimer 1.3.6.1.4.1.562.36.2.1.70.8.13.1.6
This attribute specifies the time the network waits for the requested STATUS message from the adjacent network. Upon expiry of this timer, another STATUS ENQUIRY message will be sent.
OBJECT-TYPE    
  Unsigned32 1..255  

mscFrNniSigNetworkType 1.3.6.1.4.1.562.36.2.1.70.8.13.1.7
This attribute specifies whether this Frame Relay service is running on a public or a private network. This value is used solely in populating applicable information elements within those signaling messages that require a public or private network indication.
OBJECT-TYPE    
  INTEGER private(1), public(2)  

mscFrNniSigLapfSysTable 1.3.6.1.4.1.562.36.2.1.70.8.14
This group contains the provisionable attributes for the SVC data link layer. The data link layer is governed primarily through ITU specification Q.922, and operates over DLCI 0.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniSigLapfSysEntry

mscFrNniSigLapfSysEntry 1.3.6.1.4.1.562.36.2.1.70.8.14.1
An entry in the mscFrNniSigLapfSysTable.
OBJECT-TYPE    
  MscFrNniSigLapfSysEntry  

mscFrNniSigWindowSize 1.3.6.1.4.1.562.36.2.1.70.8.14.1.2
This attribute specifies the window size. This is the maximum number of unacknowledged sequenced frames that may be outstanding from or to this interface at any one time.
OBJECT-TYPE    
  Unsigned32 1..127  

mscFrNniSigRetransmitLimit 1.3.6.1.4.1.562.36.2.1.70.8.14.1.3
This attribute specifies the number of times a frame can be retransmitted by the SVC data link layer before appropriate recovery action is taken.
OBJECT-TYPE    
  Unsigned32 0..20  

mscFrNniSigAckTimer 1.3.6.1.4.1.562.36.2.1.70.8.14.1.4
This attribute specifies how long the layer 2 protocol waits for an acknowledgment to a sent frame. The value set for ackTimer must be less than the value set for idleProbeTimer.
OBJECT-TYPE    
  Unsigned32 1000..10000  

mscFrNniSigAckDelayTimer 1.3.6.1.4.1.562.36.2.1.70.8.14.1.5
This attribute specifies how long the network waits before sending an acknowledgment for a received in-sequence I-frame. A value of 0 means that every frame is acknowledged and there will be no delay in acknowledgment. A non-zero value means that one acknowledgement is sent for a number of frames.
OBJECT-TYPE    
  Unsigned32 0..10000  

mscFrNniSigIdleProbeTimer 1.3.6.1.4.1.562.36.2.1.70.8.14.1.6
This attribute specifies how long the link is permitted to remain idle (that is, no frames are exchanged on the data link). Upon expiry of this timer, the network side's link layer polls its peer for status. The value set for idleProbeTimer must be greater than the value set for ackTimer.
OBJECT-TYPE    
  Unsigned32 1000..65535000  

mscFrNniSigCodesTable 1.3.6.1.4.1.562.36.2.1.70.8.15
This group contains the remote data network address, the last SVC clear cause and the last SVC diagnostic code coming from the subnet or the local VC.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniSigCodesEntry

mscFrNniSigCodesEntry 1.3.6.1.4.1.562.36.2.1.70.8.15.1
An entry in the mscFrNniSigCodesTable.
OBJECT-TYPE    
  MscFrNniSigCodesEntry  

mscFrNniSigLastClearRemoteDataNetworkAddress 1.3.6.1.4.1.562.36.2.1.70.8.15.1.1
This attribute indicates the Data Network Address (DNA) of the remote (the other end of the SVC connection) of the call which cleared last and whose clear and diagnostic codes were recorded.
OBJECT-TYPE    
  DigitString SIZE(0..15)  

mscFrNniSigLastClearCause 1.3.6.1.4.1.562.36.2.1.70.8.15.1.2
This attribute indicates the last SVC clear cause signalled at the end of the connection or failure to connect. It is updated only if the clear request comes from the subnet or the call is rejected locally by the VC. The same set of possible values provides the clear cause field in the accounting record.
OBJECT-TYPE    
  Unsigned32 0..255  

mscFrNniSigLastDiagnosticCode 1.3.6.1.4.1.562.36.2.1.70.8.15.1.3
This attribute indicates the last SVC diagnostic code signalled at the end of the connection or failure to connect. It is updated if the clear request comes from the subnet or the call is rejected locally by the VC. The same set of possible values provides the diagnostic code field in the accounting record.
OBJECT-TYPE    
  Unsigned32 0..255  

mscFrNniSigStateTable 1.3.6.1.4.1.562.36.2.1.70.8.16
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniSigStateEntry

mscFrNniSigStateEntry 1.3.6.1.4.1.562.36.2.1.70.8.16.1
An entry in the mscFrNniSigStateTable.
OBJECT-TYPE    
  MscFrNniSigStateEntry  

mscFrNniSigAdminState 1.3.6.1.4.1.562.36.2.1.70.8.16.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscFrNniSigOperationalState 1.3.6.1.4.1.562.36.2.1.70.8.16.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscFrNniSigUsageState 1.3.6.1.4.1.562.36.2.1.70.8.16.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscFrNniSigStatsTable 1.3.6.1.4.1.562.36.2.1.70.8.17
This group contains the statistics related to the SVC signaling layer at the interface level.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniSigStatsEntry

mscFrNniSigStatsEntry 1.3.6.1.4.1.562.36.2.1.70.8.17.1
An entry in the mscFrNniSigStatsTable.
OBJECT-TYPE    
  MscFrNniSigStatsEntry  

mscFrNniSigCurrentNumberOfSvcCalls 1.3.6.1.4.1.562.36.2.1.70.8.17.1.1
This attribute indicates the number of Frame Relay SVCs currently existing on this interface.
OBJECT-TYPE    
  Gauge32 0..992  

mscFrNniSigInCalls 1.3.6.1.4.1.562.36.2.1.70.8.17.1.2
This attribute indicates the current number of incoming SVCs on this interface (that is, the number of SVCs for which this interface represents the destination end of the call).
OBJECT-TYPE    
  Gauge32 0..992  

mscFrNniSigInCallsRefused 1.3.6.1.4.1.562.36.2.1.70.8.17.1.3
This attribute counts the incoming SVC call requests that are rejected by either this interface or by the called user. When this count exceeds the maximum, it wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrNniSigOutCalls 1.3.6.1.4.1.562.36.2.1.70.8.17.1.4
This attribute indicates the current number of outgoing SVCs on this interface (that is, the number of SVCs for which this interface represents the source end of the call).
OBJECT-TYPE    
  Gauge32 0..992  

mscFrNniSigOutCallsFailed 1.3.6.1.4.1.562.36.2.1.70.8.17.1.5
This attribute counts the outgoing SVC call requests that are rejected by either this interface, or by the network side of the destination end, or by the called user. When this count exceeds the maximum, it wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrNniSigProtocolErrors 1.3.6.1.4.1.562.36.2.1.70.8.17.1.6
This attribute counts the number of times a FRF.10 protocol error has occurred. Any one of the following events constitutes a protocol error: 1. In the user-signaled Link Layer Core Parameters IE within the SETUP or CONNECT messages, Cir, Bc and Be are all zero; 2. In the user-signaled Link Layer Core Parameters IE within the SETUP or CONNECT messages, Cir is zero but Bc is non-zero, or Bc is zero but Cir is non-zero; 3. In the user-signaled Link Layer Core Parameters IE within the SETUP or CONNECT messages, the Minimum Acceptable CIR is greater than Cir; 4. At the destination end, any of the destination to source direction link layer core parameters has been increased in the CONNECT message from the called user; 5. At the destination end, the destination to source direction Cir in the CONNECT message is smaller than the corresponding minimum acceptable Cir signaled to the called user; 6. At the source end, any of the source to destination direction link layer core parameters in the CONNECT message from the destination end has been increased; 7. At the source end, the source to destination direction Cir, after negotiation, is smaller than the corresponding minimum acceptable Cir; 8. The network has received a STATUS message from the user with an incompatible FRF.10 state. When this count reaches maximum, it wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrNniSigQualityOfServiceNotAvailable 1.3.6.1.4.1.562.36.2.1.70.8.17.1.7
This attribute counts the number of incoming and outgoing SVCs that are rejected because the quality of service requested cannot be met by the network. When this count reaches maximum, it wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrNniSigSetupTimeout 1.3.6.1.4.1.562.36.2.1.70.8.17.1.8
This attribute counts the number of times the T303 setup timer has expired. When this count reaches maximum, it wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrNniSigLastCauseInStatusMsgReceived 1.3.6.1.4.1.562.36.2.1.70.8.17.1.9
This attribute indicates the cause value in the last received user's STATUS message to an existing call. The DLCI to which this STATUS message applies is specified in the lastDlciReceivedStatus attribute. The initial value of this attribute is 0 which means that no STATUS message has been received for an existing call yet.
OBJECT-TYPE    
  Unsigned32 0..255  

mscFrNniSigLastStateInStatusMsgReceived 1.3.6.1.4.1.562.36.2.1.70.8.17.1.10
This attribute indicates the state value in the last received user's STATUS message to an existing call. The DLCI to which this STATUS message applies is specified in the lastDlciReceivedStatus attribute. The initial value of this attribute is notApplicable.
OBJECT-TYPE    
  INTEGER null(0), callInitiated(1), n2(2), outgoingCallProceeding(3), n4(4), n5(5), callPresent(6), n7(7), n8(8), incomingCallProceeding(9), active(10), releaseRequest(11), releaseIndication(12), n13(13), n14(14), n15(15), n16(16), n17(17), n18(18), n19(19), notApplicable(20), n21(21), n22(22), n23(23), n24(24), n25(25), n26(26), n27(27), n28(28), n29(29), n30(30), n31(31), n32(32), n33(33), n34(34), n35(35), n36(36), n37(37), n38(38), n39(39), n40(40), n41(41), n42(42), n43(43), n44(44), n45(45), n46(46), n47(47), n48(48), n49(49), n50(50), n51(51), n52(52), n53(53), n54(54), n55(55), n56(56), n57(57), n58(58), n59(59), n60(60), restartRequest(61), restart(62), n63(63)  

mscFrNniSigLastDlciReceivedStatus 1.3.6.1.4.1.562.36.2.1.70.8.17.1.11
This attribute shows the value of the DLCI that has most recently received a STATUS message from the user. The initial value of this attribute is 0.
OBJECT-TYPE    
  Unsigned32 0 | 16..1007  

mscFrNniSigLastStateReceivedStatus 1.3.6.1.4.1.562.36.2.1.70.8.17.1.12
This attribute shows the network FRF.10 state of the DLCI that has most recently received a STATUS message from the user. The DLCI to which this STATUS message applies is specified in the lastDlciReceivedStatus attribute. The initial value of this attribute is notApplicable.
OBJECT-TYPE    
  INTEGER null(0), callInitiated(1), outgoingCallProceeding(3), callPresent(6), incomingCallProceeding(9), active(10), releaseRequest(11), releaseIndication(12), notApplicable(20), restartRequest(61), restart(62)  

mscFrNniSigDlciCollisions 1.3.6.1.4.1.562.36.2.1.70.8.17.1.15
This attribute counts the number of call failures due to DLCI collisions.
OBJECT-TYPE    
  Counter32  

mscFrNniSigLapfStatusTable 1.3.6.1.4.1.562.36.2.1.70.8.18
This group contains the Q.922 SVC data link layer status.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniSigLapfStatusEntry

mscFrNniSigLapfStatusEntry 1.3.6.1.4.1.562.36.2.1.70.8.18.1
An entry in the mscFrNniSigLapfStatusTable.
OBJECT-TYPE    
  MscFrNniSigLapfStatusEntry  

mscFrNniSigCurrentState 1.3.6.1.4.1.562.36.2.1.70.8.18.1.1
This attribute shows the current state of the SVC data link layer interface.
OBJECT-TYPE    
  INTEGER disconnected(1), linkSetup(2), disconnectRequest(4), informationTransfer(5), waitingAck(7)  

mscFrNniSigLastStateChangeReason 1.3.6.1.4.1.562.36.2.1.70.8.18.1.2
This attribute shows the reason for the most recent state change. notStarted - this is the default state after SVC data link has just been created. abmeEntered - SVC data link has entered Asynchronous Balanced Mode after SABME or UA has been received. abmeReset - the data link has been reset. dmReceived - DM response received. dmSent - DM sent. discReceived - DISC response received. discSent - DISC sent. frmrReceived - FRMR received. n200RetranTimeOut - retransmitLimit has been exceeded. other - unspecified state change reasons. The most likely reason for this is the transition from state waitingAck to state informationTransfer.
OBJECT-TYPE    
  INTEGER notStarted(1), abmeEntered(3), abmeReset(5), dmReceived(6), dmSent(7), discReceived(8), discSent(9), frmrReceived(10), n200RetranTimeOut(12), other(13)  

mscFrNniSigFrmrReceive 1.3.6.1.4.1.562.36.2.1.70.8.18.1.3
This attribute shows the information field of the Frame Reject (FRMR) most recently received.
OBJECT-TYPE    
  HexString SIZE(0..8)  

mscFrNniSigCurrentQueueSize 1.3.6.1.4.1.562.36.2.1.70.8.18.1.4
This attribute shows the current number of frames in the SVC data link layer transmit queue.
OBJECT-TYPE    
  Counter32  

mscFrNniSigLapfStatsTable 1.3.6.1.4.1.562.36.2.1.70.8.19
This group contains the statistics for the SVC data link layer.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniSigLapfStatsEntry

mscFrNniSigLapfStatsEntry 1.3.6.1.4.1.562.36.2.1.70.8.19.1
An entry in the mscFrNniSigLapfStatsTable.
OBJECT-TYPE    
  MscFrNniSigLapfStatsEntry  

mscFrNniSigRemoteBusy 1.3.6.1.4.1.562.36.2.1.70.8.19.1.2
This attribute counts the number of times transmission of an I-frame was unsuccessful due to a perceived remote busy condition (window closed or remote busy). When this count reaches maximum, it wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrNniSigReceiveRejectFrame 1.3.6.1.4.1.562.36.2.1.70.8.19.1.3
This attribute counts the number of REJ frames received by the interface. When this count reaches maximum, it wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrNniSigAckTimeout 1.3.6.1.4.1.562.36.2.1.70.8.19.1.4
This attribute counts the number of times the ackTimer has expired. Frequent increments of this counter indicate a problem at the link or improper values have been chosen for ackTimer and ackDelayTimer between the local and remote sides. When this count reaches maximum, it wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrNniSigIFramesTransmitted 1.3.6.1.4.1.562.36.2.1.70.8.19.1.5
This attribute counts the number of SVC I-frames transmitted to the interface on DLCI 0. An I-frame may be counted more than once if there are retransmissions at the SVC data link layer. When this count reaches maximum, it wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrNniSigIFramesTxDiscarded 1.3.6.1.4.1.562.36.2.1.70.8.19.1.6
This attribute counts the number of SVC I-frames that are bound for the link but have been discarded. Discard reasons may be one of the following: 1. the frame length is beyond the allowed limit. 2. the SVC data link layer is in disconnected state. 3. the transmit queue has been purged because the queue length has reached the reset threshold. 4. the transmit queue or the queue waiting for acknowledgment has been purged because the link cannot be re-established. When this count reaches maximum, it wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrNniSigIFramesReceived 1.3.6.1.4.1.562.36.2.1.70.8.19.1.7
This attribute counts the number of SVC I-frames received from the interface. When this count reaches maximum, it wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrNniSigIFramesRcvdDiscarded 1.3.6.1.4.1.562.36.2.1.70.8.19.1.8
This attribute counts the number of SVC I-frames received but have been discarded. The discard reasons are: 1. incorrect frame size 2. frame is out of sequence 3. frame received while the network side of the SVC data link layer is not in the informationTransfer or waitingAck state. When this count reaches maximum, it wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrNniSigStateChange 1.3.6.1.4.1.562.36.2.1.70.8.19.1.8650
This attribute counts the number of times the SVC data link layer interface has changed state. While the data link layer is in informationTransfer state, this counter will increment on each expiry of idleProbeTimer as its state goes from informationTransfer to waitingAck and back. When this count exceeds the maximum, it wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrNniSigSvcaccTable 1.3.6.1.4.1.562.36.2.1.70.8.20
This group contains the provisionable attribute which controls accounting for this interface.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniSigSvcaccEntry

mscFrNniSigSvcaccEntry 1.3.6.1.4.1.562.36.2.1.70.8.20.1
An entry in the mscFrNniSigSvcaccTable.
OBJECT-TYPE    
  MscFrNniSigSvcaccEntry  

mscFrNniSigDefaultAccounting 1.3.6.1.4.1.562.36.2.1.70.8.20.1.1
This attribute specifies whether accounting data collection and record generation is turned on for switched connections at this interface. For accounting data collection and record generation to occur, this attribute must be on and at least one of the accountCollection reasons in the Dna component must be present.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscFrNniSigBandwidthNotAvailableTable 1.3.6.1.4.1.562.36.2.1.70.8.672
This attribute counts the number of call failures for each bandwidth pool due to the requested bandwidth not being available.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniSigBandwidthNotAvailableEntry

mscFrNniSigBandwidthNotAvailableEntry 1.3.6.1.4.1.562.36.2.1.70.8.672.1
An entry in the mscFrNniSigBandwidthNotAvailableTable.
OBJECT-TYPE    
  MscFrNniSigBandwidthNotAvailableEntry  

mscFrNniSigBandwidthNotAvailableIndex 1.3.6.1.4.1.562.36.2.1.70.8.672.1.1
This variable represents the mscFrNniSigBandwidthNotAvailableTable specific index for the mscFrNniSigBandwidthNotAvailableTable.
OBJECT-TYPE    
  Integer32 0..15  

mscFrNniSigBandwidthNotAvailableValue 1.3.6.1.4.1.562.36.2.1.70.8.672.1.2
This variable represents an individual value for the mscFrNniSigBandwidthNotAvailableTable.
OBJECT-TYPE    
  Counter32  

mscFrNniLts 1.3.6.1.4.1.562.36.2.1.70.9
OBJECT IDENTIFIER    

mscFrNniLtsRowStatusTable 1.3.6.1.4.1.562.36.2.1.70.9.1
This entry controls the addition and deletion of mscFrNniLts components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniLtsRowStatusEntry

mscFrNniLtsRowStatusEntry 1.3.6.1.4.1.562.36.2.1.70.9.1.1
A single entry in the table represents a single mscFrNniLts component.
OBJECT-TYPE    
  MscFrNniLtsRowStatusEntry  

mscFrNniLtsRowStatus 1.3.6.1.4.1.562.36.2.1.70.9.1.1.1
This variable is used as the basis for SNMP naming of mscFrNniLts components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscFrNniLtsComponentName 1.3.6.1.4.1.562.36.2.1.70.9.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrNniLtsStorageType 1.3.6.1.4.1.562.36.2.1.70.9.1.1.4
This variable represents the storage type value for the mscFrNniLts tables.
OBJECT-TYPE    
  StorageType  

mscFrNniLtsIndex 1.3.6.1.4.1.562.36.2.1.70.9.1.1.10
This variable represents the index for the mscFrNniLts tables.
OBJECT-TYPE    
  NonReplicated  

mscFrNniLtsPat 1.3.6.1.4.1.562.36.2.1.70.9.2
OBJECT IDENTIFIER    

mscFrNniLtsPatRowStatusTable 1.3.6.1.4.1.562.36.2.1.70.9.2.1
This entry controls the addition and deletion of mscFrNniLtsPat components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniLtsPatRowStatusEntry

mscFrNniLtsPatRowStatusEntry 1.3.6.1.4.1.562.36.2.1.70.9.2.1.1
A single entry in the table represents a single mscFrNniLtsPat component.
OBJECT-TYPE    
  MscFrNniLtsPatRowStatusEntry  

mscFrNniLtsPatRowStatus 1.3.6.1.4.1.562.36.2.1.70.9.2.1.1.1
This variable is used as the basis for SNMP naming of mscFrNniLtsPat components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscFrNniLtsPatComponentName 1.3.6.1.4.1.562.36.2.1.70.9.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrNniLtsPatStorageType 1.3.6.1.4.1.562.36.2.1.70.9.2.1.1.4
This variable represents the storage type value for the mscFrNniLtsPat tables.
OBJECT-TYPE    
  StorageType  

mscFrNniLtsPatIndex 1.3.6.1.4.1.562.36.2.1.70.9.2.1.1.10
This variable represents the index for the mscFrNniLtsPat tables.
OBJECT-TYPE    
  Integer32 0..29  

mscFrNniLtsPatDefaultsTable 1.3.6.1.4.1.562.36.2.1.70.9.2.10
This attribute group contains the specifications of the pattern.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniLtsPatDefaultsEntry

mscFrNniLtsPatDefaultsEntry 1.3.6.1.4.1.562.36.2.1.70.9.2.10.1
An entry in the mscFrNniLtsPatDefaultsTable.
OBJECT-TYPE    
  MscFrNniLtsPatDefaultsEntry  

mscFrNniLtsPatDefaultDlci 1.3.6.1.4.1.562.36.2.1.70.9.2.10.1.200
This attribute specifies for which dlci (on the local end) the frames are destined.
OBJECT-TYPE    
  Unsigned32 16..1007  

mscFrNniLtsPatDefaultNumFrames 1.3.6.1.4.1.562.36.2.1.70.9.2.10.1.201
This attribute specifies the number of frames in this pattern. This is the number of frames of this type which will be generated in one timeInterval.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniLtsPatDefaultDataSize 1.3.6.1.4.1.562.36.2.1.70.9.2.10.1.202
This attribute specifies the payload size of each frame in bytes. This is in excess to the header.
OBJECT-TYPE    
  Unsigned32 0..8200  

mscFrNniLtsPatDefaultHeaderBits 1.3.6.1.4.1.562.36.2.1.70.9.2.10.1.203
This attribute specifies whether the following bits are on/off in the header of each frame. The following bits can be set: BeCn, C/R, De, FeCn Description of bits: becn(0) fecn(1) cr(2) de(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscFrNniLtsPatDefaultHeaderLength 1.3.6.1.4.1.562.36.2.1.70.9.2.10.1.204
This attribute specifies the size of the frame relay header in bytes. Passport currently only supports a 2-byte header.
OBJECT-TYPE    
  Unsigned32 0 | 2..4  

mscFrNniLtsPatDefaultEABits 1.3.6.1.4.1.562.36.2.1.70.9.2.10.1.205
This attribute specifies how the address field extension bits are set in the frame header. Consider the value to be a four bit binary number. For example, 4 = 0100. Only the first headerLength bits are used. For instance, suppose headerLength is 3, then the appropriate EABits is 2, or 0010. This attribute can be used to create a header of length greater than two bytes or to specify incorrect EABits in the header.
OBJECT-TYPE    
  Hex 0..15  

mscFrNniLtsPatDefaultPayloadPattern 1.3.6.1.4.1.562.36.2.1.70.9.2.10.1.206
This attribute specifies the payload of each frame. The value specified is in hexadecimal, where every two digits represent a byte. A maximum of 24 digits (12 bytes) may be set, after which the pattern will repeat in the payload (depending on repeatPattern attribute). NOTE: If a RFC 1490 header is specified, via the 1490Header attribute, the specified pattern will begin following the header (i.e. at the 9th byte in the payload).
OBJECT-TYPE    
  HexString SIZE(1..12)  

mscFrNniLtsPatDefaultRfc1490Header 1.3.6.1.4.1.562.36.2.1.70.9.2.10.1.207
This attribute specifies the appropriate RFC 1490 encapsulated header of the frame. A value of 0 indicates no 1490 header. NOTE: This header resides in the first 8 bytes of the payload. If the specified value is non-zero, then the payload pattern provisioned will begin at the 9th byte.
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4), n5(5), n6(6), n7(7), n8(8), n9(9), n10(10), n11(11), n12(12), n13(13), n14(14), n15(15), n16(16), n17(17), none(18)  

mscFrNniLtsPatDefaultUseBadLrc 1.3.6.1.4.1.562.36.2.1.70.9.2.10.1.208
This attribute specifies whether the frames from this pattern are to have a bad LRC prior to being sent to the framer. The LRC is checked while the frame is being put onto the link and the failure should cause an abort frame to be sent.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscFrNniLtsPatSetupTable 1.3.6.1.4.1.562.36.2.1.70.9.2.11
This attribute group contains the specifications of the pattern.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniLtsPatSetupEntry

mscFrNniLtsPatSetupEntry 1.3.6.1.4.1.562.36.2.1.70.9.2.11.1
An entry in the mscFrNniLtsPatSetupTable.
OBJECT-TYPE    
  MscFrNniLtsPatSetupEntry  

mscFrNniLtsPatDlci 1.3.6.1.4.1.562.36.2.1.70.9.2.11.1.200
This attribute specifies for which dlci (on the local end) the frames are destined.
OBJECT-TYPE    
  Unsigned32 16..1007  

mscFrNniLtsPatNumFrames 1.3.6.1.4.1.562.36.2.1.70.9.2.11.1.201
This attribute specifies the number of frames in this pattern. This is the number of frames of this type which will be generated in one timeInterval.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniLtsPatDataSize 1.3.6.1.4.1.562.36.2.1.70.9.2.11.1.202
This attribute specifies the payload size of each frame in bytes. This is in excess to the header.
OBJECT-TYPE    
  Unsigned32 0..8200  

mscFrNniLtsPatHeaderBits 1.3.6.1.4.1.562.36.2.1.70.9.2.11.1.203
This attribute specifies whether the following bits are on/off in the header of each frame. The following bits can be set: BeCn, C/R, De, FeCn Description of bits: becn(0) fecn(1) cr(2) de(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscFrNniLtsPatHeaderLength 1.3.6.1.4.1.562.36.2.1.70.9.2.11.1.204
This attribute specifies the size of the frame relay header in bytes. Passport currently only supports a 2-byte header. Valid values are 0, 2, 3, 4. 0 indicates to use no header. That is, the frame will start with either the payload or rfc1490 header.
OBJECT-TYPE    
  Unsigned32 0 | 2..4  

mscFrNniLtsPatEaBits 1.3.6.1.4.1.562.36.2.1.70.9.2.11.1.205
This attribute specifies how the address field extension bits are set in the frame header. Consider the value to be a four bit binary number. For example, 4 = 0100. Only the first headerLength bits are used. For instance, suppose headerLength is 3, then the appropriate eaBits is 2, or 0010. This attribute can be used to create a header of length greater than two bytes or to specify incorrect eaBits in the header.
OBJECT-TYPE    
  Hex 0..15  

mscFrNniLtsPatPayloadPattern 1.3.6.1.4.1.562.36.2.1.70.9.2.11.1.206
This attribute specifies the payload of each frame. The value specified is in hexadecimal, where every two digits represent a byte. A maximum of 24 digits (12 bytes) may be set, after which the pattern will repeat in the payload (depending on repeatPattern attribute). NOTE: If a RFC 1490 header is specified, via the 1490Header attribute, the specified pattern will begin following the header (i.e. at the 9th byte in the payload).
OBJECT-TYPE    
  HexString SIZE(1..12)  

mscFrNniLtsPatRfc1490Header 1.3.6.1.4.1.562.36.2.1.70.9.2.11.1.207
This attribute specifies the appropriate RFC 1490 encapsulated header of the frame. A value of 0 indicates no 1490 header. NOTE: This header resides in the first 8 bytes of the payload. If the specified value is non-zero, then the payload pattern provisioned will begin at the 9th byte.
OBJECT-TYPE    
  INTEGER n0(0), n1(1), n2(2), n3(3), n4(4), n5(5), n6(6), n7(7), n8(8), n9(9), n10(10), n11(11), n12(12), n13(13), n14(14), n15(15), n16(16), n17(17), none(18)  

mscFrNniLtsPatUseBadLrc 1.3.6.1.4.1.562.36.2.1.70.9.2.11.1.208
This attribute specifies whether the frames from this pattern are to have a bad LRC prior to being sent to the framer. The LRC is checked while the frame is being put onto the link and the failure should cause an abort frame to be sent.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscFrNniLtsPatOpDataTable 1.3.6.1.4.1.562.36.2.1.70.9.2.12
This group contains the operational attributes which allow changing the pattern outside of provisioning mode.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniLtsPatOpDataEntry

mscFrNniLtsPatOpDataEntry 1.3.6.1.4.1.562.36.2.1.70.9.2.12.1
An entry in the mscFrNniLtsPatOpDataTable.
OBJECT-TYPE    
  MscFrNniLtsPatOpDataEntry  

mscFrNniLtsPatFramePattern 1.3.6.1.4.1.562.36.2.1.70.9.2.12.1.200
This attribute displays the first 20 to 24 bytes of the frame payload, depending on the frame relay header size selected. This attribute represents the frame if it were at least 20 to 24 bytes in size. That is, the actual frame may be smaller.
OBJECT-TYPE    
  HexString SIZE(20..24)  

mscFrNniLtsPatHdlcBitsInserted 1.3.6.1.4.1.562.36.2.1.70.9.2.12.1.201
This attribute displays how many times a zero bit will be inserted after 5 consecutive 1 bits when a frame from this pattern is sent out.
OBJECT-TYPE    
  Unsigned32 0..65535  

mscFrNniLtsPatOpStateTable 1.3.6.1.4.1.562.36.2.1.70.9.2.13
This group contains the attributes containing the operational statistics of the pattern.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniLtsPatOpStateEntry

mscFrNniLtsPatOpStateEntry 1.3.6.1.4.1.562.36.2.1.70.9.2.13.1
An entry in the mscFrNniLtsPatOpStateTable.
OBJECT-TYPE    
  MscFrNniLtsPatOpStateEntry  

mscFrNniLtsPatLoad 1.3.6.1.4.1.562.36.2.1.70.9.2.13.1.200
This attribute indicates the load due to this particular pattern. The loads associated with all of the provisioned patterns are summed to arrive at the FrLts load.
OBJECT-TYPE    
  FixedPoint3 0..4294967295  

mscFrNniLtsPatStatus 1.3.6.1.4.1.562.36.2.1.70.9.2.13.1.201
This attributes specifies the administrative state of the pattern. A disabled pattern will not be generated, although it can still be triggered.
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1)  

mscFrNniLtsSetupTable 1.3.6.1.4.1.562.36.2.1.70.9.10
This attribute group contains the parameters used to configure the behavior of the Frame Relay Load Test System.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniLtsSetupEntry

mscFrNniLtsSetupEntry 1.3.6.1.4.1.562.36.2.1.70.9.10.1
An entry in the mscFrNniLtsSetupTable.
OBJECT-TYPE    
  MscFrNniLtsSetupEntry  

mscFrNniLtsDuration 1.3.6.1.4.1.562.36.2.1.70.9.10.1.200
This attribute specifies the duration of the test in milliseconds. The test will run until the duration expires or the STOP command is issued. A value of 0 is used to indicate infinity.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniLtsAlgorithm 1.3.6.1.4.1.562.36.2.1.70.9.10.1.201
This attribute specifies which algorithm is used to generate the frames. ContinuousBurst This mode of traffic generation creates traffic at the maximum rate possible until all of the frames have been sent. The generator then waits until the end of the timeInterval to begin again. IntervalBurst This algorithm attempts to generate 10 ms bursts of burstSize frames. It will generate as many of the burstSize frames as it can per sub-interval. DelayedBurst This algorithm generates bursts of burstSize frames separated by 10 ms delays. FixedBurst This aglorithm is similar to IntervalBurst, except a fixed burst size of 12 frames is used. delayMeasurement This algorithm is used to measure delay. The specified number of frames in the indicated pattern are generated, one at a time, with a maximum wait of maxDelay before sending the next frame. This algorithm is not implemented yet.
OBJECT-TYPE    
  INTEGER continousBurst(0), intervalBurst(1), delayBurst(2), fixedBurst(3)  

mscFrNniLtsBurstSize 1.3.6.1.4.1.562.36.2.1.70.9.10.1.204
This attribute specifies the number of frames per burst under the delayedBurst and intervalBurst algorithms.
OBJECT-TYPE    
  Unsigned32 1..250  

mscFrNniLtsTimeInterval 1.3.6.1.4.1.562.36.2.1.70.9.10.1.205
This attribute specifies the time interval to the specified number of seconds. Granuality is in centiseconds. Maximum is 1 minute.
OBJECT-TYPE    
  Unsigned32 1..60000  

mscFrNniLtsStateTable 1.3.6.1.4.1.562.36.2.1.70.9.11
This group contains the operation statistics of the load generator.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniLtsStateEntry

mscFrNniLtsStateEntry 1.3.6.1.4.1.562.36.2.1.70.9.11.1
An entry in the mscFrNniLtsStateTable.
OBJECT-TYPE    
  MscFrNniLtsStateEntry  

mscFrNniLtsGeneratorState 1.3.6.1.4.1.562.36.2.1.70.9.11.1.200
This attribute indicates whether the Lts is generating traffic.
OBJECT-TYPE    
  INTEGER stopped(0), running(1)  

mscFrNniLtsCycleIncomplete 1.3.6.1.4.1.562.36.2.1.70.9.11.1.201
This attribute indicates whether the time required to generate all of the enabled patterns is more than timeInterval by a true value. Otherwise, this flag is set to false. Default is True.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

mscFrNniLtsLastActiveInterval 1.3.6.1.4.1.562.36.2.1.70.9.11.1.202
This attribute indicates the actual time it took to generate all of the enabled patterns in the last cycle. If cycleIncomplete is true, this value should be zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniLtsLoad 1.3.6.1.4.1.562.36.2.1.70.9.11.1.204
This attribute indicates the load being generated. This value represents that calculated using the set number of ticks. The actual burstTimeInterval may differ. One entire cycle of the patterns is completed in activeInterval and thus most of the load may be concentrated early in the set interval.
OBJECT-TYPE    
  FixedPoint3 0..4294967295  

mscFrNniLtsElapsedGenerationTime 1.3.6.1.4.1.562.36.2.1.70.9.11.1.205
This attribute indicates how many milliseconds have elapsed since the start of this test.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniLtsResultsTable 1.3.6.1.4.1.562.36.2.1.70.9.12
This group contains the frame counting attributes for the LTS component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniLtsResultsEntry

mscFrNniLtsResultsEntry 1.3.6.1.4.1.562.36.2.1.70.9.12.1
An entry in the mscFrNniLtsResultsTable.
OBJECT-TYPE    
  MscFrNniLtsResultsEntry  

mscFrNniLtsFramesTx 1.3.6.1.4.1.562.36.2.1.70.9.12.1.200
This attribute specifies the number of frames send to the network since the last time these statistics were cleared. This is similar to the framesToIf attribute of the FRAMER component.
OBJECT-TYPE    
  Counter32  

mscFrNniLtsBytesTx 1.3.6.1.4.1.562.36.2.1.70.9.12.1.204
This attribute indicates the number of bytes sent.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniLtsBitRateTx 1.3.6.1.4.1.562.36.2.1.70.9.12.1.208
This attribute indicates the bit rate being sent to the link. It should only differ from the load if the burstTimeInterval would be >= the timeInterval or burstSize frames cannot be generated in 10ms (intervalBurst algorithm).
OBJECT-TYPE    
  FixedPoint3 0..4294967295  

mscFrNniLtsFrameRateTx 1.3.6.1.4.1.562.36.2.1.70.9.12.1.209
This attribute indicates the frame rate being sent to the link. It is calculated using the number of frames sent to the link in one cycle of the patterns.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniCidDataTable 1.3.6.1.4.1.562.36.2.1.70.10
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniCidDataEntry

mscFrNniCidDataEntry 1.3.6.1.4.1.562.36.2.1.70.10.1
An entry in the mscFrNniCidDataTable.
OBJECT-TYPE    
  MscFrNniCidDataEntry  

mscFrNniCustomerIdentifier 1.3.6.1.4.1.562.36.2.1.70.10.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

mscFrNniStateTable 1.3.6.1.4.1.562.36.2.1.70.11
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniStateEntry

mscFrNniStateEntry 1.3.6.1.4.1.562.36.2.1.70.11.1
An entry in the mscFrNniStateTable.
OBJECT-TYPE    
  MscFrNniStateEntry  

mscFrNniAdminState 1.3.6.1.4.1.562.36.2.1.70.11.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscFrNniOperationalState 1.3.6.1.4.1.562.36.2.1.70.11.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscFrNniUsageState 1.3.6.1.4.1.562.36.2.1.70.11.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscFrNniAvailabilityStatus 1.3.6.1.4.1.562.36.2.1.70.11.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

mscFrNniProceduralStatus 1.3.6.1.4.1.562.36.2.1.70.11.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscFrNniControlStatus 1.3.6.1.4.1.562.36.2.1.70.11.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscFrNniAlarmStatus 1.3.6.1.4.1.562.36.2.1.70.11.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscFrNniStandbyStatus 1.3.6.1.4.1.562.36.2.1.70.11.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

mscFrNniUnknownStatus 1.3.6.1.4.1.562.36.2.1.70.11.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

mscFrNniStatsTable 1.3.6.1.4.1.562.36.2.1.70.12
This group contains the statistics about the operational behaviour of the service at the interface level.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniStatsEntry

mscFrNniStatsEntry 1.3.6.1.4.1.562.36.2.1.70.12.1
An entry in the mscFrNniStatsTable.
OBJECT-TYPE    
  MscFrNniStatsEntry  

mscFrNniLastUnknownDlci 1.3.6.1.4.1.562.36.2.1.70.12.1.1
This attribute identifies the most recent DLCI which user frames were received on for which a DLCI has not been provisioned on the port.
OBJECT-TYPE    
  Unsigned32 0..1023  

mscFrNniUnknownDlciFramesFromIf 1.3.6.1.4.1.562.36.2.1.70.12.1.2
This attribute contains a count of the number of frames received from the interface with an unknown DLCI (DLCI which is not provisioned). When the maximum is exceeded the count wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrNniInvalidHeaderFramesFromIf 1.3.6.1.4.1.562.36.2.1.70.12.1.3
This attribute counts the number of frames received from the interface with an invalid header format. When the maximum is exceeded the count wraps to zero.
OBJECT-TYPE    
  Counter32  

mscFrNniIfEntryTable 1.3.6.1.4.1.562.36.2.1.70.13
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniIfEntryEntry

mscFrNniIfEntryEntry 1.3.6.1.4.1.562.36.2.1.70.13.1
An entry in the mscFrNniIfEntryTable.
OBJECT-TYPE    
  MscFrNniIfEntryEntry  

mscFrNniIfAdminStatus 1.3.6.1.4.1.562.36.2.1.70.13.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscFrNniIfIndex 1.3.6.1.4.1.562.36.2.1.70.13.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscFrNniOperStatusTable 1.3.6.1.4.1.562.36.2.1.70.14
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniOperStatusEntry

mscFrNniOperStatusEntry 1.3.6.1.4.1.562.36.2.1.70.14.1
An entry in the mscFrNniOperStatusTable.
OBJECT-TYPE    
  MscFrNniOperStatusEntry  

mscFrNniSnmpOperStatus 1.3.6.1.4.1.562.36.2.1.70.14.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscFrNniEmissionPriorityQsTable 1.3.6.1.4.1.562.36.2.1.70.15
This group contains the provisionable attribute to specifie the number of Frame Relay egress emission priority queues to be used on that Frame Relay Interface
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniEmissionPriorityQsEntry

mscFrNniEmissionPriorityQsEntry 1.3.6.1.4.1.562.36.2.1.70.15.1
An entry in the mscFrNniEmissionPriorityQsTable.
OBJECT-TYPE    
  MscFrNniEmissionPriorityQsEntry  

mscFrNniNumberOfEmissionQs 1.3.6.1.4.1.562.36.2.1.70.15.1.1
This attribute specifies the number of egress emission priority queues that will be used for that Frame Relay interface. The possible values of this attribute are 2 or 4: For V.35, V.11, HSSI, E1, DS1, E3, DS3 or 8pDS1 the possible values are: 2 (in which case they are hardware queues), or 4 (in which case they are software queues). For DS1C, E1C or DS3C the possible values are 2, 4 (in all cases they are software queues).
OBJECT-TYPE    
  Unsigned32 2 | 4  

mscFrNniCa 1.3.6.1.4.1.562.36.2.1.70.101
OBJECT IDENTIFIER    

mscFrNniCaRowStatusTable 1.3.6.1.4.1.562.36.2.1.70.101.1
This entry controls the addition and deletion of mscFrNniCa components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniCaRowStatusEntry

mscFrNniCaRowStatusEntry 1.3.6.1.4.1.562.36.2.1.70.101.1.1
A single entry in the table represents a single mscFrNniCa component.
OBJECT-TYPE    
  MscFrNniCaRowStatusEntry  

mscFrNniCaRowStatus 1.3.6.1.4.1.562.36.2.1.70.101.1.1.1
This variable is used as the basis for SNMP naming of mscFrNniCa components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscFrNniCaComponentName 1.3.6.1.4.1.562.36.2.1.70.101.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrNniCaStorageType 1.3.6.1.4.1.562.36.2.1.70.101.1.1.4
This variable represents the storage type value for the mscFrNniCa tables.
OBJECT-TYPE    
  StorageType  

mscFrNniCaIndex 1.3.6.1.4.1.562.36.2.1.70.101.1.1.10
This variable represents the index for the mscFrNniCa tables.
OBJECT-TYPE    
  NonReplicated  

mscFrNniCaTpm 1.3.6.1.4.1.562.36.2.1.70.101.2
OBJECT IDENTIFIER    

mscFrNniCaTpmRowStatusTable 1.3.6.1.4.1.562.36.2.1.70.101.2.1
This entry controls the addition and deletion of mscFrNniCaTpm components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniCaTpmRowStatusEntry

mscFrNniCaTpmRowStatusEntry 1.3.6.1.4.1.562.36.2.1.70.101.2.1.1
A single entry in the table represents a single mscFrNniCaTpm component.
OBJECT-TYPE    
  MscFrNniCaTpmRowStatusEntry  

mscFrNniCaTpmRowStatus 1.3.6.1.4.1.562.36.2.1.70.101.2.1.1.1
This variable is used as the basis for SNMP naming of mscFrNniCaTpm components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscFrNniCaTpmComponentName 1.3.6.1.4.1.562.36.2.1.70.101.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscFrNniCaTpmStorageType 1.3.6.1.4.1.562.36.2.1.70.101.2.1.1.4
This variable represents the storage type value for the mscFrNniCaTpm tables.
OBJECT-TYPE    
  StorageType  

mscFrNniCaTpmIndex 1.3.6.1.4.1.562.36.2.1.70.101.2.1.1.10
This variable represents the index for the mscFrNniCaTpm tables.
OBJECT-TYPE    
  Integer32 0..15  

mscFrNniCaTpmProvTable 1.3.6.1.4.1.562.36.2.1.70.101.2.10
This attribute group contains the provisionable attributes of the Tpm component at this interface.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniCaTpmProvEntry

mscFrNniCaTpmProvEntry 1.3.6.1.4.1.562.36.2.1.70.101.2.10.1
An entry in the mscFrNniCaTpmProvTable.
OBJECT-TYPE    
  MscFrNniCaTpmProvEntry  

mscFrNniCaTpmAssignedIngressBandwidthPool 1.3.6.1.4.1.562.36.2.1.70.101.2.10.1.2
This attribute specifies the ingress bandwidth pool which is used to support this transfer priority at this interface. When this attribute is set to sameAsModule, the bandwidth pool that is used is obtained from the assignedIngressBandwidthPool attribute under the Mod Frs DprsNet Tpm/n component. VALUES ( 16 = sameAsModule )
OBJECT-TYPE    
  Unsigned32 0..15 | 16  

mscFrNniCaTpmAssignedEgressBandwidthPool 1.3.6.1.4.1.562.36.2.1.70.101.2.10.1.3
This attribute specifies the egress bandwidth pool which is used to support this transfer priority at this interface. When this attribute is set to sameAsModule, the bandwidth pool that is used is obtained from the assignedEgressBandwidthPool attribute under the Mod Frs DprsNet Tpm/n component. VALUES ( 16 = sameAsModule )
OBJECT-TYPE    
  Unsigned32 0..15 | 16  

mscFrNniCaProvTable 1.3.6.1.4.1.562.36.2.1.70.101.10
This attribute group contains the common provisionable attributes of the Ca component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniCaProvEntry

mscFrNniCaProvEntry 1.3.6.1.4.1.562.36.2.1.70.101.10.1
An entry in the mscFrNniCaProvTable.
OBJECT-TYPE    
  MscFrNniCaProvEntry  

mscFrNniCaOverrideLinkRate 1.3.6.1.4.1.562.36.2.1.70.101.10.1.2
This attribute allows the link rate to be overridden for this interface. This allows the user to specify a value other than the actual physical link rate computed when a Framer component is provisioned. When a VFramer component is provisioned, this attribute overrides a link rate set to the maximum value supported by CAC . This attribute serves to provide the user control on the amount of bandwidth available for performing CAC.
OBJECT-TYPE    
  Unsigned32 0..429496729  

mscFrNniCaMaximumBandwidthPerCall 1.3.6.1.4.1.562.36.2.1.70.101.10.1.3
This attribute specifies the maximum bandwidth that can be allocated per connection.
OBJECT-TYPE    
  Unsigned32 0..520000000  

mscFrNniCaIngressCacTable 1.3.6.1.4.1.562.36.2.1.70.101.11
This attribute group contains the common provisionable attributes for ingress call admission control.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniCaIngressCacEntry

mscFrNniCaIngressCacEntry 1.3.6.1.4.1.562.36.2.1.70.101.11.1
An entry in the mscFrNniCaIngressCacTable.
OBJECT-TYPE    
  MscFrNniCaIngressCacEntry  

mscFrNniCaIngressApplyToCos 1.3.6.1.4.1.562.36.2.1.70.101.11.1.2
This attribute specifies which Classes of Service (CoS) have ingress Call Admission Control (CAC) applied to them. Ingress CAC applies only to swithced connections (SVCs and S-SPVCs). none - Ingress CAC is turned off for all classes of service. cirOnly - Ingress CAC is applied only to the CIR portion of a connection's bandwidth requirements for CIR>0 classes of service. cirAndEir - Ingress CAC is applied to both CIR and EIR portions of a connections bandwidth requirements for all classes of service.
OBJECT-TYPE    
  INTEGER none(0), cirOnly(1), cirAndEir(2)  

mscFrNniCaIngressMaximumEirOnlyCalls 1.3.6.1.4.1.562.36.2.1.70.101.11.1.4
This attribute specifies the maximum number of connections in the ingress direction with EIR only traffic that can be up at a given time.
OBJECT-TYPE    
  Unsigned32 0..992  

mscFrNniCaEgressCacTable 1.3.6.1.4.1.562.36.2.1.70.101.12
This attribute group contains the common provisionable attributes for egress call admission control.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniCaEgressCacEntry

mscFrNniCaEgressCacEntry 1.3.6.1.4.1.562.36.2.1.70.101.12.1
An entry in the mscFrNniCaEgressCacTable.
OBJECT-TYPE    
  MscFrNniCaEgressCacEntry  

mscFrNniCaEgressApplyToCos 1.3.6.1.4.1.562.36.2.1.70.101.12.1.2
This attribute specifies which Classes of Service (CoS) have egress Call Admission Control (CAC) applied to them. Egress CAC applies only to swithced connections (SVCs and S-SPVCs). none - Egress CAC is turned off for all classes of service. cirOnly - Egress CAC is applied only to the CIR portion of a connection's bandwidth requirements for CIR>0 classes of service. cirAndEir - Egress CAC is applied to both CIR and EIR portions of a connections bandwidth requirements for all classes of service.
OBJECT-TYPE    
  INTEGER none(0), cirOnly(1), cirAndEir(2)  

mscFrNniCaEgressMaximumEirOnlyCalls 1.3.6.1.4.1.562.36.2.1.70.101.12.1.4
This attribute specifies the maximum number of connections in the egress direction with EIR only traffic that can be up at a given time.
OBJECT-TYPE    
  Unsigned32 0..992  

mscFrNniCaOpTable 1.3.6.1.4.1.562.36.2.1.70.101.13
This attribute group contains the operational status of the Ca component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniCaOpEntry

mscFrNniCaOpEntry 1.3.6.1.4.1.562.36.2.1.70.101.13.1
An entry in the mscFrNniCaOpTable.
OBJECT-TYPE    
  MscFrNniCaOpEntry  

mscFrNniCaLinkRate 1.3.6.1.4.1.562.36.2.1.70.101.13.1.2
This attribute indicates the link rate used by both ingress and egress CAC to calculate the effective bandwidth pool sizes. If the provisionable attribute overrideLinkRate under this component is 0, then the link rate reported is the actual link rate of the port or channel. Otherwise, the link rate reported is the overrideLinkRate under this component.
OBJECT-TYPE    
  Unsigned32 0..520000000  

mscFrNniCaNumberRejectedEgressCirPermConn 1.3.6.1.4.1.562.36.2.1.70.101.13.1.681
This attribute indicates the number of permanent connections (that is, PVC and P-SPVC) that are rejected by egress CAC. A connection is rejected by egress CAC if it requests more egress CIR bandwidth than is available, and the egressApplyToCos attribute is set to either cirOnly or cirAndEir.
OBJECT-TYPE    
  Gauge32 0..992  

mscFrNniCaNumberRejectedEgressEirPermConn 1.3.6.1.4.1.562.36.2.1.70.101.13.1.682
This attribute indicates the number of permanent connections (that is, PVC and P-SPVC) that are rejected by egress CAC. A connection is rejected by egress CAC if it requests more egress EIR bandwidth than is available, and the egressApplyToCos attribute is set to cirAndEir.
OBJECT-TYPE    
  Gauge32 0..992  

mscFrNniCaIngCirBPTable 1.3.6.1.4.1.562.36.2.1.70.101.666
Port capacity is partitioned into 16 pools (pool 0 through pool 15) for the ingress CIR traffic. This attribute specifies the percentage of port capacity that is allowed for each pool. The percentage for each pool ranges from 0% to 1000% of the link rate. It allows for under or over subscription of the port. Under subscription occurs when the sum of the percentages assigned to the 16 pools is less than 100%. Over subscription occurs when the sum of the percentages for the 16 pools exceeds 100%. The default is full sharing of port capacity with three pre-set partitions.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniCaIngCirBPEntry

mscFrNniCaIngCirBPEntry 1.3.6.1.4.1.562.36.2.1.70.101.666.1
An entry in the mscFrNniCaIngCirBPTable.
OBJECT-TYPE    
  MscFrNniCaIngCirBPEntry  

mscFrNniCaIngCirBPIndex 1.3.6.1.4.1.562.36.2.1.70.101.666.1.1
This variable represents the mscFrNniCaIngCirBPTable specific index for the mscFrNniCaIngCirBPTable.
OBJECT-TYPE    
  Integer32 0..15  

mscFrNniCaIngCirBPValue 1.3.6.1.4.1.562.36.2.1.70.101.666.1.2
This variable represents an individual value for the mscFrNniCaIngCirBPTable.
OBJECT-TYPE    
  Unsigned32 0..1000  

mscFrNniCaEgCirBpTable 1.3.6.1.4.1.562.36.2.1.70.101.667
Port capacity is partitioned into 16 pools (pool 0 through pool 15) for the egress CIR traffic. This attribute specifies the percentage of port capacity that is allowed for each pool. The percentage for each pool ranges from 0% to 1000% of the link rate. It allows for under or over subscription of the port. Under subscription occurs when the sum of the percentages assigned to the 16 pools is less than 100%. Over subscription occurs when the sum of the percentages for the 16 pools exceeds 100%. The default is full sharing of port capacity with three pre-set partitions.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniCaEgCirBpEntry

mscFrNniCaEgCirBpEntry 1.3.6.1.4.1.562.36.2.1.70.101.667.1
An entry in the mscFrNniCaEgCirBpTable.
OBJECT-TYPE    
  MscFrNniCaEgCirBpEntry  

mscFrNniCaEgCirBpIndex 1.3.6.1.4.1.562.36.2.1.70.101.667.1.1
This variable represents the mscFrNniCaEgCirBpTable specific index for the mscFrNniCaEgCirBpTable.
OBJECT-TYPE    
  Integer32 0..15  

mscFrNniCaEgCirBpValue 1.3.6.1.4.1.562.36.2.1.70.101.667.1.2
This variable represents an individual value for the mscFrNniCaEgCirBpTable.
OBJECT-TYPE    
  Unsigned32 0..1000  

mscFrNniCaIngCirPoolAdmitBwTable 1.3.6.1.4.1.562.36.2.1.70.101.668
This attribute indicates the total admitted CIR bandwidth from each CIR bandwidth pool in the ingress direction. Each value is the sum of the equivalent bit rates of the admitted connections.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniCaIngCirPoolAdmitBwEntry

mscFrNniCaIngCirPoolAdmitBwEntry 1.3.6.1.4.1.562.36.2.1.70.101.668.1
An entry in the mscFrNniCaIngCirPoolAdmitBwTable.
OBJECT-TYPE    
  MscFrNniCaIngCirPoolAdmitBwEntry  

mscFrNniCaIngCirPoolAdmitBwIndex 1.3.6.1.4.1.562.36.2.1.70.101.668.1.1
This variable represents the mscFrNniCaIngCirPoolAdmitBwTable specific index for the mscFrNniCaIngCirPoolAdmitBwTable.
OBJECT-TYPE    
  Integer32 0..15  

mscFrNniCaIngCirPoolAdmitBwValue 1.3.6.1.4.1.562.36.2.1.70.101.668.1.2
This variable represents an individual value for the mscFrNniCaIngCirPoolAdmitBwTable.
OBJECT-TYPE    
  Gauge32 0..520000000  

mscFrNniCaIngCirPoolAvailBwTable 1.3.6.1.4.1.562.36.2.1.70.101.669
This attribute indicates the remaining available CIR bandwidth in each ingress CIR bandwidth pool.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniCaIngCirPoolAvailBwEntry

mscFrNniCaIngCirPoolAvailBwEntry 1.3.6.1.4.1.562.36.2.1.70.101.669.1
An entry in the mscFrNniCaIngCirPoolAvailBwTable.
OBJECT-TYPE    
  MscFrNniCaIngCirPoolAvailBwEntry  

mscFrNniCaIngCirPoolAvailBwIndex 1.3.6.1.4.1.562.36.2.1.70.101.669.1.1
This variable represents the mscFrNniCaIngCirPoolAvailBwTable specific index for the mscFrNniCaIngCirPoolAvailBwTable.
OBJECT-TYPE    
  Integer32 0..15  

mscFrNniCaIngCirPoolAvailBwValue 1.3.6.1.4.1.562.36.2.1.70.101.669.1.2
This variable represents an individual value for the mscFrNniCaIngCirPoolAvailBwTable.
OBJECT-TYPE    
  Gauge32 0..52000000  

mscFrNniCaEgCirPoolAdmitBwTable 1.3.6.1.4.1.562.36.2.1.70.101.670
This attribute indicates the total admitted CIR bandwidth from each CIR bandwidth pool in the egress direction. Each value is the sum of the equivalent bit rates of the admitted connections.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniCaEgCirPoolAdmitBwEntry

mscFrNniCaEgCirPoolAdmitBwEntry 1.3.6.1.4.1.562.36.2.1.70.101.670.1
An entry in the mscFrNniCaEgCirPoolAdmitBwTable.
OBJECT-TYPE    
  MscFrNniCaEgCirPoolAdmitBwEntry  

mscFrNniCaEgCirPoolAdmitBwIndex 1.3.6.1.4.1.562.36.2.1.70.101.670.1.1
This variable represents the mscFrNniCaEgCirPoolAdmitBwTable specific index for the mscFrNniCaEgCirPoolAdmitBwTable.
OBJECT-TYPE    
  Integer32 0..15  

mscFrNniCaEgCirPoolAdmitBwValue 1.3.6.1.4.1.562.36.2.1.70.101.670.1.2
This variable represents an individual value for the mscFrNniCaEgCirPoolAdmitBwTable.
OBJECT-TYPE    
  Gauge32 0..520000000  

mscFrNniCaEgCirPoolAvailBwTable 1.3.6.1.4.1.562.36.2.1.70.101.671
This attribute indicates the remaining available CIR bandwidth in each egress CIR bandwidth pool.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniCaEgCirPoolAvailBwEntry

mscFrNniCaEgCirPoolAvailBwEntry 1.3.6.1.4.1.562.36.2.1.70.101.671.1
An entry in the mscFrNniCaEgCirPoolAvailBwTable.
OBJECT-TYPE    
  MscFrNniCaEgCirPoolAvailBwEntry  

mscFrNniCaEgCirPoolAvailBwIndex 1.3.6.1.4.1.562.36.2.1.70.101.671.1.1
This variable represents the mscFrNniCaEgCirPoolAvailBwTable specific index for the mscFrNniCaEgCirPoolAvailBwTable.
OBJECT-TYPE    
  Integer32 0..15  

mscFrNniCaEgCirPoolAvailBwValue 1.3.6.1.4.1.562.36.2.1.70.101.671.1.2
This variable represents an individual value for the mscFrNniCaEgCirPoolAvailBwTable.
OBJECT-TYPE    
  Gauge32 0..52000000  

mscFrNniCaIngEirBpTable 1.3.6.1.4.1.562.36.2.1.70.101.673
Port capacity is partitioned into 16 pools (pool 0 through pool 15) for the ingress EIR traffic. This attribute specifies the percentage of port capacity that is allowed for each pool. The percentage for each pool ranges from 0% to 1000% of the link rate. It allows for under or over subscription of the port. Under subscription occurs when the sum of the percentages assigned to the 16 pools is less than 100%. Over subscription occurs when the sum of the percentages for the 16 pools exceeds 100%. The default is full sharing of port capacity with three pre-set partitions.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniCaIngEirBpEntry

mscFrNniCaIngEirBpEntry 1.3.6.1.4.1.562.36.2.1.70.101.673.1
An entry in the mscFrNniCaIngEirBpTable.
OBJECT-TYPE    
  MscFrNniCaIngEirBpEntry  

mscFrNniCaIngEirBpIndex 1.3.6.1.4.1.562.36.2.1.70.101.673.1.1
This variable represents the mscFrNniCaIngEirBpTable specific index for the mscFrNniCaIngEirBpTable.
OBJECT-TYPE    
  Integer32 0..15  

mscFrNniCaIngEirBpValue 1.3.6.1.4.1.562.36.2.1.70.101.673.1.2
This variable represents an individual value for the mscFrNniCaIngEirBpTable.
OBJECT-TYPE    
  Unsigned32 0..1000  

mscFrNniCaEgEirBpTable 1.3.6.1.4.1.562.36.2.1.70.101.674
Port capacity is partitioned into 16 pools (pool 0 through pool 15) for the egress EIR traffic. This attribute specifies the percentage of port capacity that is allowed for each pool. The percentage for each pool ranges from 0% to 1000% of the link rate. It allows for under or over subscription of the port. Under subscription occurs when the sum of the percentages assigned to the 16 pools is less than 100%. Over subscription occurs when the sum of the percentages for the 16 pools exceeds 100%. The default is full sharing of port capacity with three pre-set partitions.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniCaEgEirBpEntry

mscFrNniCaEgEirBpEntry 1.3.6.1.4.1.562.36.2.1.70.101.674.1
An entry in the mscFrNniCaEgEirBpTable.
OBJECT-TYPE    
  MscFrNniCaEgEirBpEntry  

mscFrNniCaEgEirBpIndex 1.3.6.1.4.1.562.36.2.1.70.101.674.1.1
This variable represents the mscFrNniCaEgEirBpTable specific index for the mscFrNniCaEgEirBpTable.
OBJECT-TYPE    
  Integer32 0..15  

mscFrNniCaEgEirBpValue 1.3.6.1.4.1.562.36.2.1.70.101.674.1.2
This variable represents an individual value for the mscFrNniCaEgEirBpTable.
OBJECT-TYPE    
  Unsigned32 0..1000  

mscFrNniCaIngEirPoolAdmitBwTable 1.3.6.1.4.1.562.36.2.1.70.101.675
This attribute indicates the total admitted EIR bandwidth from each EIR bandwidth pool in the ingress direction. Each value is the sum of the equivalent bit rates of the admitted connections. If the ingressApplyToCos attribute is set to none, all ingress CIR bandwidth pools are set to 0.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniCaIngEirPoolAdmitBwEntry

mscFrNniCaIngEirPoolAdmitBwEntry 1.3.6.1.4.1.562.36.2.1.70.101.675.1
An entry in the mscFrNniCaIngEirPoolAdmitBwTable.
OBJECT-TYPE    
  MscFrNniCaIngEirPoolAdmitBwEntry  

mscFrNniCaIngEirPoolAdmitBwIndex 1.3.6.1.4.1.562.36.2.1.70.101.675.1.1
This variable represents the mscFrNniCaIngEirPoolAdmitBwTable specific index for the mscFrNniCaIngEirPoolAdmitBwTable.
OBJECT-TYPE    
  Integer32 0..15  

mscFrNniCaIngEirPoolAdmitBwValue 1.3.6.1.4.1.562.36.2.1.70.101.675.1.2
This variable represents an individual value for the mscFrNniCaIngEirPoolAdmitBwTable.
OBJECT-TYPE    
  Gauge32 0..520000000  

mscFrNniCaIngEirPoolAvailBwTable 1.3.6.1.4.1.562.36.2.1.70.101.676
This attribute indicates the remaining available EIR bandwidth in each ingress EIR bandwidth pool. If the ingressApplyToCos attribute is set to either none or cirOnly, all ingress EIR bandwidth pools are set to 0.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniCaIngEirPoolAvailBwEntry

mscFrNniCaIngEirPoolAvailBwEntry 1.3.6.1.4.1.562.36.2.1.70.101.676.1
An entry in the mscFrNniCaIngEirPoolAvailBwTable.
OBJECT-TYPE    
  MscFrNniCaIngEirPoolAvailBwEntry  

mscFrNniCaIngEirPoolAvailBwIndex 1.3.6.1.4.1.562.36.2.1.70.101.676.1.1
This variable represents the mscFrNniCaIngEirPoolAvailBwTable specific index for the mscFrNniCaIngEirPoolAvailBwTable.
OBJECT-TYPE    
  Integer32 0..15  

mscFrNniCaIngEirPoolAvailBwValue 1.3.6.1.4.1.562.36.2.1.70.101.676.1.2
This variable represents an individual value for the mscFrNniCaIngEirPoolAvailBwTable.
OBJECT-TYPE    
  Gauge32 0..52000000  

mscFrNniCaEgEirPoolAdmitBwTable 1.3.6.1.4.1.562.36.2.1.70.101.677
This attribute indicates the total admitted EIR bandwidth from each EIR bandwidth pool in the egress direction. Each value is the sum of the equivalent bit rates of the admitted connections. If the egressApplyToCos attribute is set to none, all egress CIR bandwidth pools are set to 0.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniCaEgEirPoolAdmitBwEntry

mscFrNniCaEgEirPoolAdmitBwEntry 1.3.6.1.4.1.562.36.2.1.70.101.677.1
An entry in the mscFrNniCaEgEirPoolAdmitBwTable.
OBJECT-TYPE    
  MscFrNniCaEgEirPoolAdmitBwEntry  

mscFrNniCaEgEirPoolAdmitBwIndex 1.3.6.1.4.1.562.36.2.1.70.101.677.1.1
This variable represents the mscFrNniCaEgEirPoolAdmitBwTable specific index for the mscFrNniCaEgEirPoolAdmitBwTable.
OBJECT-TYPE    
  Integer32 0..15  

mscFrNniCaEgEirPoolAdmitBwValue 1.3.6.1.4.1.562.36.2.1.70.101.677.1.2
This variable represents an individual value for the mscFrNniCaEgEirPoolAdmitBwTable.
OBJECT-TYPE    
  Gauge32 0..520000000  

mscFrNniCaEgEirPoolAvailBwTable 1.3.6.1.4.1.562.36.2.1.70.101.678
This attribute indicates the remaining available EIR bandwidth in each egress EIR bandwidth pool. If the egressApplyToCos attribute is set to either none or cirOnly, all egress EIR bandwidth pools are set to 0.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniCaEgEirPoolAvailBwEntry

mscFrNniCaEgEirPoolAvailBwEntry 1.3.6.1.4.1.562.36.2.1.70.101.678.1
An entry in the mscFrNniCaEgEirPoolAvailBwTable.
OBJECT-TYPE    
  MscFrNniCaEgEirPoolAvailBwEntry  

mscFrNniCaEgEirPoolAvailBwIndex 1.3.6.1.4.1.562.36.2.1.70.101.678.1.1
This variable represents the mscFrNniCaEgEirPoolAvailBwTable specific index for the mscFrNniCaEgEirPoolAvailBwTable.
OBJECT-TYPE    
  Integer32 0..15  

mscFrNniCaEgEirPoolAvailBwValue 1.3.6.1.4.1.562.36.2.1.70.101.678.1.2
This variable represents an individual value for the mscFrNniCaEgEirPoolAvailBwTable.
OBJECT-TYPE    
  Gauge32 0..52000000  

mscFrNniFrmToIfByQueueTable 1.3.6.1.4.1.562.36.2.1.70.341
This attribute counts the total number of frames transmitted to the interface per egress emission priority queue since the component has been activated. There is potientially a maximum of 4 emission priority queues. The number of available egress queues varies according to the value of the provisionable attribute numberOfEmissionQs. Egress queue 0 has the lowest priority, while egress queue 3 has the highest priority. The queue values are only indicated when the numberOfEmissionQs is set to 4 queues.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniFrmToIfByQueueEntry

mscFrNniFrmToIfByQueueEntry 1.3.6.1.4.1.562.36.2.1.70.341.1
An entry in the mscFrNniFrmToIfByQueueTable.
OBJECT-TYPE    
  MscFrNniFrmToIfByQueueEntry  

mscFrNniFrmToIfByQueueIndex 1.3.6.1.4.1.562.36.2.1.70.341.1.1
This variable represents the index for the mscFrNniFrmToIfByQueueTable.
OBJECT-TYPE    
  Integer32 0..3  

mscFrNniFrmToIfByQueueValue 1.3.6.1.4.1.562.36.2.1.70.341.1.2
This variable represents an individual value for the mscFrNniFrmToIfByQueueTable.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscFrNniOctetToIfByQueueTable 1.3.6.1.4.1.562.36.2.1.70.342
This attribute counts the total number of octets transmitted from the service to the interface per emission priority queue since the component has been activated. There is potientially a maximum of 4 emission priority queues. The number of available egress queues varies according to the value of the provisionable attribute numberOfEmissionQs. Egress queue 0 has the lowest priority, while egress queue 3 has the highest priority.
OBJECT-TYPE    
  SEQUENCE OF  
    MscFrNniOctetToIfByQueueEntry

mscFrNniOctetToIfByQueueEntry 1.3.6.1.4.1.562.36.2.1.70.342.1
An entry in the mscFrNniOctetToIfByQueueTable.
OBJECT-TYPE    
  MscFrNniOctetToIfByQueueEntry  

mscFrNniOctetToIfByQueueIndex 1.3.6.1.4.1.562.36.2.1.70.342.1.1
This variable represents the index for the mscFrNniOctetToIfByQueueTable.
OBJECT-TYPE    
  Integer32 0..3  

mscFrNniOctetToIfByQueueValue 1.3.6.1.4.1.562.36.2.1.70.342.1.2
This variable represents an individual value for the mscFrNniOctetToIfByQueueTable.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

frameRelayNniMIB 1.3.6.1.4.1.562.36.2.2.23
OBJECT IDENTIFIER    

frameRelayNniGroup 1.3.6.1.4.1.562.36.2.2.23.1
OBJECT IDENTIFIER    

frameRelayNniGroupCA 1.3.6.1.4.1.562.36.2.2.23.1.1
OBJECT IDENTIFIER    

frameRelayNniGroupCA02 1.3.6.1.4.1.562.36.2.2.23.1.1.3
OBJECT IDENTIFIER    

frameRelayNniGroupCA02A 1.3.6.1.4.1.562.36.2.2.23.1.1.3.2
OBJECT IDENTIFIER    

frameRelayNniCapabilities 1.3.6.1.4.1.562.36.2.2.23.3
OBJECT IDENTIFIER    

frameRelayNniCapabilitiesCA 1.3.6.1.4.1.562.36.2.2.23.3.1
OBJECT IDENTIFIER    

frameRelayNniCapabilitiesCA02 1.3.6.1.4.1.562.36.2.2.23.3.1.3
OBJECT IDENTIFIER    

frameRelayNniCapabilitiesCA02A 1.3.6.1.4.1.562.36.2.2.23.3.1.3.2
OBJECT IDENTIFIER    

Defined Objects

MscFrNniRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrNniRowStatus  
  DisplayString as mscFrNniComponentName  
  StorageType as mscFrNniStorageType  
  Integer32 as mscFrNniIndex  

MscFrNniCidDataEntry  
SEQUENCE    
  Unsigned32 as mscFrNniCustomerIdentifier  

MscFrNniStateEntry  
SEQUENCE    
  INTEGER as mscFrNniAdminState  
  INTEGER as mscFrNniOperationalState  
  INTEGER as mscFrNniUsageState  
  OCTET STRING as mscFrNniAvailabilityStatus  
  OCTET STRING as mscFrNniProceduralStatus  
  OCTET STRING as mscFrNniControlStatus  
  OCTET STRING as mscFrNniAlarmStatus  
  INTEGER as mscFrNniStandbyStatus  
  INTEGER as mscFrNniUnknownStatus  

MscFrNniStatsEntry  
SEQUENCE    
  Unsigned32 as mscFrNniLastUnknownDlci  
  Counter32 as mscFrNniUnknownDlciFramesFromIf  
  Counter32 as mscFrNniInvalidHeaderFramesFromIf  

MscFrNniIfEntryEntry  
SEQUENCE    
  INTEGER as mscFrNniIfAdminStatus  
  InterfaceIndex as mscFrNniIfIndex  

MscFrNniOperStatusEntry  
SEQUENCE    
  INTEGER as mscFrNniSnmpOperStatus  

MscFrNniEmissionPriorityQsEntry  
SEQUENCE    
  Unsigned32 as mscFrNniNumberOfEmissionQs  

MscFrNniFrmToIfByQueueEntry  
SEQUENCE    
  Integer32 as mscFrNniFrmToIfByQueueIndex  
  Unsigned32 as mscFrNniFrmToIfByQueueValue  

MscFrNniOctetToIfByQueueEntry  
SEQUENCE    
  Integer32 as mscFrNniOctetToIfByQueueIndex  
  Unsigned32 as mscFrNniOctetToIfByQueueValue  

MscFrNniDnaRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrNniDnaRowStatus  
  DisplayString as mscFrNniDnaComponentName  
  StorageType as mscFrNniDnaStorageType  
  NonReplicated as mscFrNniDnaIndex  

MscFrNniDnaAddressEntry  
SEQUENCE    
  INTEGER as mscFrNniDnaNumberingPlanIndicator  
  DigitString as mscFrNniDnaDataNetworkAddress  

MscFrNniDnaOutgoingOptionsEntry  
SEQUENCE    
  INTEGER as mscFrNniDnaOutDefaultPriority  
  INTEGER as mscFrNniDnaOutDefaultPathSensitivity  
  INTEGER as mscFrNniDnaOutPathSensitivityOverRide  
  INTEGER as mscFrNniDnaOutDefaultPathReliability  
  INTEGER as mscFrNniDnaOutAccess  
  INTEGER as mscFrNniDnaDefaultTransferPriority  
  INTEGER as mscFrNniDnaTransferPriorityOverRide  

MscFrNniDnaIncomingOptionsEntry  
SEQUENCE    
  INTEGER as mscFrNniDnaIncAccess  

MscFrNniDnaCallOptionsEntry  
SEQUENCE    
  Unsigned32 as mscFrNniDnaAccountClass  
  OCTET STRING as mscFrNniDnaAccountCollection  
  Unsigned32 as mscFrNniDnaServiceExchange  
  INTEGER as mscFrNniDnaEgressAccounting  
  INTEGER as mscFrNniDnaDataPath  

MscFrNniDnaCugRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrNniDnaCugRowStatus  
  DisplayString as mscFrNniDnaCugComponentName  
  StorageType as mscFrNniDnaCugStorageType  
  Integer32 as mscFrNniDnaCugIndex  

MscFrNniDnaCugCugOptionsEntry  
SEQUENCE    
  INTEGER as mscFrNniDnaCugType  
  DigitString as mscFrNniDnaCugDnic  
  Unsigned32 as mscFrNniDnaCugInterlockCode  
  INTEGER as mscFrNniDnaCugPreferential  
  INTEGER as mscFrNniDnaCugOutCalls  
  INTEGER as mscFrNniDnaCugIncCalls  

MscFrNniDnaHgMRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrNniDnaHgMRowStatus  
  DisplayString as mscFrNniDnaHgMComponentName  
  StorageType as mscFrNniDnaHgMStorageType  
  NonReplicated as mscFrNniDnaHgMIndex  

MscFrNniDnaHgMIfEntry  
SEQUENCE    
  Unsigned32 as mscFrNniDnaHgMAvailabilityUpdateThreshold  

MscFrNniDnaHgMOpEntry  
SEQUENCE    
  Unsigned32 as mscFrNniDnaHgMMaximumAvailableAggregateCir  
  Unsigned32 as mscFrNniDnaHgMAvailableAggregateCir  
  INTEGER as mscFrNniDnaHgMAvailabilityDelta  
  Unsigned32 as mscFrNniDnaHgMAvailableDlcis  
  Unsigned64 as mscFrNniDnaHgMMaximumAvailableAggregateCir64  
  Unsigned64 as mscFrNniDnaHgMAvailableAggregateCir64  

MscFrNniDnaHgMHgAddrRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrNniDnaHgMHgAddrRowStatus  
  DisplayString as mscFrNniDnaHgMHgAddrComponentName  
  StorageType as mscFrNniDnaHgMHgAddrStorageType  
  Integer32 as mscFrNniDnaHgMHgAddrIndex  

MscFrNniDnaHgMHgAddrAddrEntry  
SEQUENCE    
  INTEGER as mscFrNniDnaHgMHgAddrNumberingPlanIndicator  
  DigitString as mscFrNniDnaHgMHgAddrDataNetworkAddress  

MscFrNniFramerRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrNniFramerRowStatus  
  DisplayString as mscFrNniFramerComponentName  
  StorageType as mscFrNniFramerStorageType  
  NonReplicated as mscFrNniFramerIndex  

MscFrNniFramerProvEntry  
SEQUENCE    
  Link as mscFrNniFramerInterfaceName  

MscFrNniFramerLinkEntry  
SEQUENCE    
  INTEGER as mscFrNniFramerDataInversion  
  INTEGER as mscFrNniFramerFrameCrcType  
  Unsigned32 as mscFrNniFramerFlagsBetweenFrames  

MscFrNniFramerStateEntry  
SEQUENCE    
  INTEGER as mscFrNniFramerAdminState  
  INTEGER as mscFrNniFramerOperationalState  
  INTEGER as mscFrNniFramerUsageState  

MscFrNniFramerStatsEntry  
SEQUENCE    
  Counter32 as mscFrNniFramerFrmToIf  
  Counter32 as mscFrNniFramerFrmFromIf  
  Counter32 as mscFrNniFramerOctetFromIf  
  Counter32 as mscFrNniFramerAborts  
  Counter32 as mscFrNniFramerCrcErrors  
  Counter32 as mscFrNniFramerLrcErrors  
  Counter32 as mscFrNniFramerNonOctetErrors  
  Counter32 as mscFrNniFramerOverruns  
  Counter32 as mscFrNniFramerUnderruns  
  Counter32 as mscFrNniFramerLargeFrmErrors  
  Counter32 as mscFrNniFramerFrmModeErrors  
  PassportCounter64 as mscFrNniFramerFrmToIf64  
  PassportCounter64 as mscFrNniFramerFrmFromIf64  
  PassportCounter64 as mscFrNniFramerOctetFromIf64  

MscFrNniFramerUtilEntry  
SEQUENCE    
  Gauge32 as mscFrNniFramerNormPrioLinkUtilToIf  
  Gauge32 as mscFrNniFramerNormPrioLinkUtilFromIf  

MscFrNniLmiRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrNniLmiRowStatus  
  DisplayString as mscFrNniLmiComponentName  
  StorageType as mscFrNniLmiStorageType  
  NonReplicated as mscFrNniLmiIndex  

MscFrNniLmiParmsEntry  
SEQUENCE    
  INTEGER as mscFrNniLmiProcedures  
  INTEGER as mscFrNniLmiAsyncStatusReport  
  Unsigned32 as mscFrNniLmiErrorEventThreshold  
  Unsigned32 as mscFrNniLmiEventCount  
  Unsigned32 as mscFrNniLmiCheckPointTimer  
  INTEGER as mscFrNniLmiIgnoreActiveBit  

MscFrNniLmiNniParmsEntry  
SEQUENCE    
  Unsigned32 as mscFrNniLmiFullStatusPollingCycles  
  Unsigned32 as mscFrNniLmiLinkVerificationTimer  

MscFrNniLmiStateEntry  
SEQUENCE    
  INTEGER as mscFrNniLmiAdminState  
  INTEGER as mscFrNniLmiOperationalState  
  INTEGER as mscFrNniLmiUsageState  

MscFrNniLmiPsiEntry  
SEQUENCE    
  INTEGER as mscFrNniLmiProtocolStatus  
  INTEGER as mscFrNniLmiOpProcedures  

MscFrNniLmiStatsEntry  
SEQUENCE    
  Counter32 as mscFrNniLmiKeepAliveStatusToIf  
  Counter32 as mscFrNniLmiFullStatusToIf  
  Counter32 as mscFrNniLmiKeepAliveStatusEnqFromIf  
  Counter32 as mscFrNniLmiFullStatusEnqFromIf  
  AsciiString as mscFrNniLmiNetworkSideEventHistory  
  AsciiString as mscFrNniLmiUserSideEventHistory  
  Counter32 as mscFrNniLmiProtocolErrors  
  Counter32 as mscFrNniLmiUnexpectedIes  
  Counter32 as mscFrNniLmiSequenceErrors  
  Counter32 as mscFrNniLmiStatusSequenceErrors  
  Counter32 as mscFrNniLmiUnexpectedReports  
  Counter32 as mscFrNniLmiPollingVerifTimeouts  
  Counter32 as mscFrNniLmiNoStatusReportCount  

MscFrNniDlciRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrNniDlciRowStatus  
  DisplayString as mscFrNniDlciComponentName  
  StorageType as mscFrNniDlciStorageType  
  Integer32 as mscFrNniDlciIndex  

MscFrNniDlciStateEntry  
SEQUENCE    
  INTEGER as mscFrNniDlciAdminState  
  INTEGER as mscFrNniDlciOperationalState  
  INTEGER as mscFrNniDlciUsageState  
  OCTET STRING as mscFrNniDlciAvailabilityStatus  
  OCTET STRING as mscFrNniDlciProceduralStatus  
  OCTET STRING as mscFrNniDlciControlStatus  
  OCTET STRING as mscFrNniDlciAlarmStatus  
  INTEGER as mscFrNniDlciStandbyStatus  
  INTEGER as mscFrNniDlciUnknownStatus  

MscFrNniDlciAbitEntry  
SEQUENCE    
  INTEGER as mscFrNniDlciABitStatusToIf  
  INTEGER as mscFrNniDlciABitReasonToIf  
  INTEGER as mscFrNniDlciABitStatusFromIf  
  INTEGER as mscFrNniDlciABitReasonFromIf  
  INTEGER as mscFrNniDlciLoopbackState  

MscFrNniDlciSpOpEntry  
SEQUENCE    
  Unsigned32 as mscFrNniDlciMaximumFrameSize  
  INTEGER as mscFrNniDlciRateEnforcement  
  Unsigned32 as mscFrNniDlciCommittedInformationRate  
  Unsigned32 as mscFrNniDlciCommittedBurstSize  
  Unsigned32 as mscFrNniDlciExcessBurstSize  
  Unsigned32 as mscFrNniDlciMeasurementInterval  
  INTEGER as mscFrNniDlciRateAdaptation  
  INTEGER as mscFrNniDlciAccounting  
  INTEGER as mscFrNniDlciEmissionPriorityToIf  
  Unsigned32 as mscFrNniDlciTransferPriToNwk  
  Unsigned32 as mscFrNniDlciTransferPriFromNwk  

MscFrNniDlciStatsEntry  
SEQUENCE    
  Unsigned32 as mscFrNniDlciFrmToIf  
  Unsigned32 as mscFrNniDlciFecnFrmToIf  
  Unsigned32 as mscFrNniDlciBecnFrmToIf  
  Unsigned32 as mscFrNniDlciBciToSubnet  
  Unsigned32 as mscFrNniDlciDeFrmToIf  
  Unsigned32 as mscFrNniDlciDiscCongestedToIf  
  Unsigned32 as mscFrNniDlciDiscDeCongestedToIf  
  Unsigned32 as mscFrNniDlciFrmFromIf  
  Unsigned32 as mscFrNniDlciFecnFrmFromIf  
  Unsigned32 as mscFrNniDlciBecnFrmFromIf  
  Unsigned32 as mscFrNniDlciFciFromSubnet  
  Unsigned32 as mscFrNniDlciBciFromSubnet  
  Unsigned32 as mscFrNniDlciDeFrmFromIf  
  Unsigned32 as mscFrNniDlciExcessFrmFromIf  
  Unsigned32 as mscFrNniDlciDiscExcessFromIf  
  Unsigned32 as mscFrNniDlciDiscFrameAbit  
  Unsigned32 as mscFrNniDlciDiscCongestedFromIf  
  Unsigned32 as mscFrNniDlciDiscDeCongestedFromIf  
  Unsigned32 as mscFrNniDlciErrorShortFrmFromIf  
  Unsigned32 as mscFrNniDlciErrorLongFrmFromIf  
  Unsigned32 as mscFrNniDlciBecnFrmSetByService  
  Unsigned32 as mscFrNniDlciBytesToIf  
  Unsigned32 as mscFrNniDlciDeBytesToIf  
  Unsigned32 as mscFrNniDlciDiscCongestedToIfBytes  
  Unsigned32 as mscFrNniDlciDiscDeCongestedToIfBytes  
  Unsigned32 as mscFrNniDlciBytesFromIf  
  Unsigned32 as mscFrNniDlciDeBytesFromIf  
  Unsigned32 as mscFrNniDlciExcessBytesFromIf  
  Unsigned32 as mscFrNniDlciDiscExcessFromIfBytes  
  Unsigned32 as mscFrNniDlciDiscByteAbit  
  Unsigned32 as mscFrNniDlciDiscCongestedFromIfBytes  
  Unsigned32 as mscFrNniDlciDiscDeCongestedFromIfBytes  
  Unsigned32 as mscFrNniDlciErrorShortBytesFromIf  
  Unsigned32 as mscFrNniDlciErrorLongBytesFromIf  
  Unsigned32 as mscFrNniDlciRateAdaptReduct  
  Unsigned32 as mscFrNniDlciRateAdaptReductPeriod  
  INTEGER as mscFrNniDlciTransferPriorityToNetwork  
  INTEGER as mscFrNniDlciTransferPriorityFromNetwork  
  Unsigned32 as mscFrNniDlciCirPresent  
  Unsigned32 as mscFrNniDlciEirPresent  

MscFrNniDlciIntEntry  
SEQUENCE    
  EnterpriseDateAndTime as mscFrNniDlciStartTime  
  Unsigned64 as mscFrNniDlciTotalIngressBytes  
  Unsigned64 as mscFrNniDlciTotalEgressBytes  
  Unsigned64 as mscFrNniDlciEirIngressBytes  
  Unsigned64 as mscFrNniDlciEirEgressBytes  
  Unsigned64 as mscFrNniDlciDiscardedBytes  
  Unsigned32 as mscFrNniDlciTotalIngressSegFrm  
  Unsigned32 as mscFrNniDlciTotalEgressSegFrm  
  Unsigned32 as mscFrNniDlciEirIngressSegFrm  
  Unsigned32 as mscFrNniDlciEirEgressSegFrm  
  Unsigned32 as mscFrNniDlciDiscardedSegFrm  
  Unsigned32 as mscFrNniDlciCirPresentObs  
  Unsigned32 as mscFrNniDlciEirPresentObs  
  INTEGER as mscFrNniDlciRateEnforcementPresent  
  INTEGER as mscFrNniDlciRateAdaptationPresent  
  INTEGER as mscFrNniDlciLocalRateAdaptOccurred  
  Hex as mscFrNniDlciCallReferenceNumber  
  Unsigned32 as mscFrNniDlciElapsedDifference  
  Unsigned32 as mscFrNniDlciCallRefNumber  

MscFrNniDlciCalldEntry  
SEQUENCE    
  INTEGER as mscFrNniDlciCallType  
  INTEGER as mscFrNniDlciCallState  
  Unsigned32 as mscFrNniDlciCallReference  

MscFrNniDlciDcRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrNniDlciDcRowStatus  
  DisplayString as mscFrNniDlciDcComponentName  
  StorageType as mscFrNniDlciDcStorageType  
  NonReplicated as mscFrNniDlciDcIndex  

MscFrNniDlciDcOptionsEntry  
SEQUENCE    
  INTEGER as mscFrNniDlciDcRemoteNpi  
  DigitString as mscFrNniDlciDcRemoteDna  
  Unsigned32 as mscFrNniDlciDcRemoteDlci  
  INTEGER as mscFrNniDlciDcType  
  INTEGER as mscFrNniDlciDcTransferPriority  
  INTEGER as mscFrNniDlciDcDiscardPriority  
  INTEGER as mscFrNniDlciDcDeDiscardPriority  
  INTEGER as mscFrNniDlciDcDataPath  
  Unsigned32 as mscFrNniDlciDcCugIndex  
  INTEGER as mscFrNniDlciDcCugType  
  INTEGER as mscFrNniDlciDcMapIpCosToFrQos  

MscFrNniDlciDcNfaEntry  
SEQUENCE    
  Integer32 as mscFrNniDlciDcNfaIndex  
  HexString as mscFrNniDlciDcNfaValue  
  RowStatus as mscFrNniDlciDcNfaRowStatus  

MscFrNniDlciVcRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrNniDlciVcRowStatus  
  DisplayString as mscFrNniDlciVcComponentName  
  StorageType as mscFrNniDlciVcStorageType  
  NonReplicated as mscFrNniDlciVcIndex  

MscFrNniDlciVcCadEntry  
SEQUENCE    
  INTEGER as mscFrNniDlciVcType  
  INTEGER as mscFrNniDlciVcState  
  INTEGER as mscFrNniDlciVcPreviousState  
  Unsigned32 as mscFrNniDlciVcDiagnosticCode  
  Unsigned32 as mscFrNniDlciVcPreviousDiagnosticCode  
  INTEGER as mscFrNniDlciVcCalledNpi  
  DigitString as mscFrNniDlciVcCalledDna  
  Unsigned32 as mscFrNniDlciVcCalledLcn  
  INTEGER as mscFrNniDlciVcCallingNpi  
  DigitString as mscFrNniDlciVcCallingDna  
  Unsigned32 as mscFrNniDlciVcCallingLcn  
  INTEGER as mscFrNniDlciVcAccountingEnabled  
  INTEGER as mscFrNniDlciVcFastSelectCall  
  INTEGER as mscFrNniDlciVcPathReliability  
  INTEGER as mscFrNniDlciVcAccountingEnd  
  INTEGER as mscFrNniDlciVcPriority  
  Unsigned32 as mscFrNniDlciVcSegmentSize  
  Unsigned32 as mscFrNniDlciVcMaxSubnetPktSize  
  INTEGER as mscFrNniDlciVcRcosToNetwork  
  INTEGER as mscFrNniDlciVcRcosFromNetwork  
  INTEGER as mscFrNniDlciVcEmissionPriorityToNetwork  
  INTEGER as mscFrNniDlciVcEmissionPriorityFromNetwork  
  AsciiString as mscFrNniDlciVcDataPath  

MscFrNniDlciVcIntdEntry  
SEQUENCE    
  Hex as mscFrNniDlciVcCallReferenceNumber  
  Unsigned32 as mscFrNniDlciVcElapsedTimeTillNow  
  Unsigned32 as mscFrNniDlciVcSegmentsRx  
  Unsigned32 as mscFrNniDlciVcSegmentsSent  
  EnterpriseDateAndTime as mscFrNniDlciVcStartTime  
  Unsigned32 as mscFrNniDlciVcCallReferenceNumberDecimal  

MscFrNniDlciVcFrdEntry  
SEQUENCE    
  Unsigned32 as mscFrNniDlciVcFrmCongestedToSubnet  
  Unsigned32 as mscFrNniDlciVcCannotForwardToSubnet  
  Unsigned32 as mscFrNniDlciVcNotDataXferToSubnet  
  Unsigned32 as mscFrNniDlciVcOutOfRangeFrmFromSubnet  
  Unsigned32 as mscFrNniDlciVcCombErrorsFromSubnet  
  Unsigned32 as mscFrNniDlciVcDuplicatesFromSubnet  
  Unsigned32 as mscFrNniDlciVcNotDataXferFromSubnet  
  Unsigned32 as mscFrNniDlciVcFrmLossTimeouts  
  Unsigned32 as mscFrNniDlciVcOoSeqByteCntExceeded  
  Unsigned32 as mscFrNniDlciVcPeakOoSeqPktCount  
  Unsigned32 as mscFrNniDlciVcPeakOoSeqFrmForwarded  
  Unsigned32 as mscFrNniDlciVcSendSequenceNumber  
  Unsigned32 as mscFrNniDlciVcPktRetryTimeouts  
  Unsigned32 as mscFrNniDlciVcPeakRetryQueueSize  
  Unsigned32 as mscFrNniDlciVcSubnetRecoveries  
  Unsigned32 as mscFrNniDlciVcOoSeqPktCntExceeded  
  Unsigned32 as mscFrNniDlciVcPeakOoSeqByteCount  

MscFrNniDlciVcDmepEntry  
SEQUENCE    
  RowPointer as mscFrNniDlciVcDmepValue  

MscFrNniDlciSpRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrNniDlciSpRowStatus  
  DisplayString as mscFrNniDlciSpComponentName  
  StorageType as mscFrNniDlciSpStorageType  
  NonReplicated as mscFrNniDlciSpIndex  

MscFrNniDlciSpParmsEntry  
SEQUENCE    
  Unsigned32 as mscFrNniDlciSpMaximumFrameSize  
  INTEGER as mscFrNniDlciSpRateEnforcement  
  Gauge32 as mscFrNniDlciSpCommittedInformationRate  
  Gauge32 as mscFrNniDlciSpCommittedBurstSize  
  Gauge32 as mscFrNniDlciSpExcessBurstSize  
  Unsigned32 as mscFrNniDlciSpMeasurementInterval  
  INTEGER as mscFrNniDlciSpRateAdaptation  
  INTEGER as mscFrNniDlciSpAccounting  
  Unsigned32 as mscFrNniDlciSpRaSensitivity  
  INTEGER as mscFrNniDlciSpUpdateBCI  

MscFrNniDlciLbRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrNniDlciLbRowStatus  
  DisplayString as mscFrNniDlciLbComponentName  
  StorageType as mscFrNniDlciLbStorageType  
  NonReplicated as mscFrNniDlciLbIndex  

MscFrNniDlciLbStatsEntry  
SEQUENCE    
  Unsigned32 as mscFrNniDlciLbLocalTotalFrm  
  Unsigned32 as mscFrNniDlciLbLocalTotalBytes  
  Unsigned32 as mscFrNniDlciLbLocalFecnFrm  
  Unsigned32 as mscFrNniDlciLbLocalBecnFrm  
  Unsigned32 as mscFrNniDlciLbLocalDeFrm  
  Unsigned32 as mscFrNniDlciLbLocalDeBytes  
  Unsigned32 as mscFrNniDlciLbRemoteTotalFrm  
  Unsigned32 as mscFrNniDlciLbRemoteTotalBytes  
  Unsigned32 as mscFrNniDlciLbRemoteFecnFrm  
  Unsigned32 as mscFrNniDlciLbRemoteBecnFrm  
  Unsigned32 as mscFrNniDlciLbRemoteDeFrm  
  Unsigned32 as mscFrNniDlciLbRemoteDeBytes  

MscFrNniDlciEgressSpRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrNniDlciEgressSpRowStatus  
  DisplayString as mscFrNniDlciEgressSpComponentName  
  StorageType as mscFrNniDlciEgressSpStorageType  
  NonReplicated as mscFrNniDlciEgressSpIndex  

MscFrNniDlciEgressSpProvEntry  
SEQUENCE    
  Unsigned32 as mscFrNniDlciEgressSpCommittedInformationRate  
  Unsigned32 as mscFrNniDlciEgressSpCommittedBurstSize  
  Unsigned32 as mscFrNniDlciEgressSpExcessBurstSize  
  Unsigned32 as mscFrNniDlciEgressSpMeasurementInterval  

MscFrNniVFramerRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrNniVFramerRowStatus  
  DisplayString as mscFrNniVFramerComponentName  
  StorageType as mscFrNniVFramerStorageType  
  NonReplicated as mscFrNniVFramerIndex  

MscFrNniVFramerProvEntry  
SEQUENCE    
  Link as mscFrNniVFramerOtherVirtualFramer  
  Link as mscFrNniVFramerLogicalProcessor  

MscFrNniVFramerStateEntry  
SEQUENCE    
  INTEGER as mscFrNniVFramerAdminState  
  INTEGER as mscFrNniVFramerOperationalState  
  INTEGER as mscFrNniVFramerUsageState  

MscFrNniVFramerStatsEntry  
SEQUENCE    
  PassportCounter64 as mscFrNniVFramerFrmToOtherVFramer  
  PassportCounter64 as mscFrNniVFramerFrmFromOtherVFramer  
  PassportCounter64 as mscFrNniVFramerOctetFromOtherVFramer  

MscFrNniSigRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrNniSigRowStatus  
  DisplayString as mscFrNniSigComponentName  
  StorageType as mscFrNniSigStorageType  
  NonReplicated as mscFrNniSigIndex  

MscFrNniSigProvEntry  
SEQUENCE    
  INTEGER as mscFrNniSigDlciAllocation  
  Unsigned32 as mscFrNniSigHighestPermanentDlci  
  Unsigned32 as mscFrNniSigHighestPvcDlci  

MscFrNniSigServParmsEntry  
SEQUENCE    
  Unsigned32 as mscFrNniSigMaximumFrameSize  
  Unsigned32 as mscFrNniSigDefaultMaximumFrameSize  
  Unsigned32 as mscFrNniSigDefaultCommittedInformationRate  
  Unsigned32 as mscFrNniSigDefaultCommittedBurstSize  
  Unsigned32 as mscFrNniSigDefaultExcessBurstSize  
  INTEGER as mscFrNniSigRateEnforcement  
  INTEGER as mscFrNniSigRateAdaptation  
  Unsigned32 as mscFrNniSigRaSensitivity  
  INTEGER as mscFrNniSigUpdateBCI  

MscFrNniSigSysParmsEntry  
SEQUENCE    
  Unsigned32 as mscFrNniSigCallSetupTimer  
  Unsigned32 as mscFrNniSigReleaseTimer  
  Unsigned32 as mscFrNniSigCallProceedingTimer  
  Unsigned32 as mscFrNniSigRestartReqTimer  
  Unsigned32 as mscFrNniSigRestartRcvTimer  
  Unsigned32 as mscFrNniSigStatusEnqTimer  
  INTEGER as mscFrNniSigNetworkType  

MscFrNniSigLapfSysEntry  
SEQUENCE    
  Unsigned32 as mscFrNniSigWindowSize  
  Unsigned32 as mscFrNniSigRetransmitLimit  
  Unsigned32 as mscFrNniSigAckTimer  
  Unsigned32 as mscFrNniSigAckDelayTimer  
  Unsigned32 as mscFrNniSigIdleProbeTimer  

MscFrNniSigCodesEntry  
SEQUENCE    
  DigitString as mscFrNniSigLastClearRemoteDataNetworkAddress  
  Unsigned32 as mscFrNniSigLastClearCause  
  Unsigned32 as mscFrNniSigLastDiagnosticCode  

MscFrNniSigStateEntry  
SEQUENCE    
  INTEGER as mscFrNniSigAdminState  
  INTEGER as mscFrNniSigOperationalState  
  INTEGER as mscFrNniSigUsageState  

MscFrNniSigStatsEntry  
SEQUENCE    
  Gauge32 as mscFrNniSigCurrentNumberOfSvcCalls  
  Gauge32 as mscFrNniSigInCalls  
  Counter32 as mscFrNniSigInCallsRefused  
  Gauge32 as mscFrNniSigOutCalls  
  Counter32 as mscFrNniSigOutCallsFailed  
  Counter32 as mscFrNniSigProtocolErrors  
  Counter32 as mscFrNniSigQualityOfServiceNotAvailable  
  Counter32 as mscFrNniSigSetupTimeout  
  Unsigned32 as mscFrNniSigLastCauseInStatusMsgReceived  
  INTEGER as mscFrNniSigLastStateInStatusMsgReceived  
  Unsigned32 as mscFrNniSigLastDlciReceivedStatus  
  INTEGER as mscFrNniSigLastStateReceivedStatus  
  Counter32 as mscFrNniSigDlciCollisions  

MscFrNniSigLapfStatusEntry  
SEQUENCE    
  INTEGER as mscFrNniSigCurrentState  
  INTEGER as mscFrNniSigLastStateChangeReason  
  HexString as mscFrNniSigFrmrReceive  
  Counter32 as mscFrNniSigCurrentQueueSize  

MscFrNniSigLapfStatsEntry  
SEQUENCE    
  Counter32 as mscFrNniSigRemoteBusy  
  Counter32 as mscFrNniSigReceiveRejectFrame  
  Counter32 as mscFrNniSigAckTimeout  
  Counter32 as mscFrNniSigIFramesTransmitted  
  Counter32 as mscFrNniSigIFramesTxDiscarded  
  Counter32 as mscFrNniSigIFramesReceived  
  Counter32 as mscFrNniSigIFramesRcvdDiscarded  
  Counter32 as mscFrNniSigStateChange  

MscFrNniSigSvcaccEntry  
SEQUENCE    
  INTEGER as mscFrNniSigDefaultAccounting  

MscFrNniSigBandwidthNotAvailableEntry  
SEQUENCE    
  Integer32 as mscFrNniSigBandwidthNotAvailableIndex  
  Counter32 as mscFrNniSigBandwidthNotAvailableValue  

MscFrNniLtsRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrNniLtsRowStatus  
  DisplayString as mscFrNniLtsComponentName  
  StorageType as mscFrNniLtsStorageType  
  NonReplicated as mscFrNniLtsIndex  

MscFrNniLtsSetupEntry  
SEQUENCE    
  Unsigned32 as mscFrNniLtsDuration  
  INTEGER as mscFrNniLtsAlgorithm  
  Unsigned32 as mscFrNniLtsBurstSize  
  Unsigned32 as mscFrNniLtsTimeInterval  

MscFrNniLtsStateEntry  
SEQUENCE    
  INTEGER as mscFrNniLtsGeneratorState  
  INTEGER as mscFrNniLtsCycleIncomplete  
  Unsigned32 as mscFrNniLtsLastActiveInterval  
  FixedPoint3 as mscFrNniLtsLoad  
  Unsigned32 as mscFrNniLtsElapsedGenerationTime  

MscFrNniLtsResultsEntry  
SEQUENCE    
  Counter32 as mscFrNniLtsFramesTx  
  Unsigned32 as mscFrNniLtsBytesTx  
  FixedPoint3 as mscFrNniLtsBitRateTx  
  Unsigned32 as mscFrNniLtsFrameRateTx  

MscFrNniLtsPatRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrNniLtsPatRowStatus  
  DisplayString as mscFrNniLtsPatComponentName  
  StorageType as mscFrNniLtsPatStorageType  
  Integer32 as mscFrNniLtsPatIndex  

MscFrNniLtsPatDefaultsEntry  
SEQUENCE    
  Unsigned32 as mscFrNniLtsPatDefaultDlci  
  Unsigned32 as mscFrNniLtsPatDefaultNumFrames  
  Unsigned32 as mscFrNniLtsPatDefaultDataSize  
  OCTET STRING as mscFrNniLtsPatDefaultHeaderBits  
  Unsigned32 as mscFrNniLtsPatDefaultHeaderLength  
  Hex as mscFrNniLtsPatDefaultEABits  
  HexString as mscFrNniLtsPatDefaultPayloadPattern  
  INTEGER as mscFrNniLtsPatDefaultRfc1490Header  
  INTEGER as mscFrNniLtsPatDefaultUseBadLrc  

MscFrNniLtsPatSetupEntry  
SEQUENCE    
  Unsigned32 as mscFrNniLtsPatDlci  
  Unsigned32 as mscFrNniLtsPatNumFrames  
  Unsigned32 as mscFrNniLtsPatDataSize  
  OCTET STRING as mscFrNniLtsPatHeaderBits  
  Unsigned32 as mscFrNniLtsPatHeaderLength  
  Hex as mscFrNniLtsPatEaBits  
  HexString as mscFrNniLtsPatPayloadPattern  
  INTEGER as mscFrNniLtsPatRfc1490Header  
  INTEGER as mscFrNniLtsPatUseBadLrc  

MscFrNniLtsPatOpDataEntry  
SEQUENCE    
  HexString as mscFrNniLtsPatFramePattern  
  Unsigned32 as mscFrNniLtsPatHdlcBitsInserted  

MscFrNniLtsPatOpStateEntry  
SEQUENCE    
  FixedPoint3 as mscFrNniLtsPatLoad  
  INTEGER as mscFrNniLtsPatStatus  

MscFrNniCaRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrNniCaRowStatus  
  DisplayString as mscFrNniCaComponentName  
  StorageType as mscFrNniCaStorageType  
  NonReplicated as mscFrNniCaIndex  

MscFrNniCaProvEntry  
SEQUENCE    
  Unsigned32 as mscFrNniCaOverrideLinkRate  
  Unsigned32 as mscFrNniCaMaximumBandwidthPerCall  

MscFrNniCaIngressCacEntry  
SEQUENCE    
  INTEGER as mscFrNniCaIngressApplyToCos  
  Unsigned32 as mscFrNniCaIngressMaximumEirOnlyCalls  

MscFrNniCaEgressCacEntry  
SEQUENCE    
  INTEGER as mscFrNniCaEgressApplyToCos  
  Unsigned32 as mscFrNniCaEgressMaximumEirOnlyCalls  

MscFrNniCaOpEntry  
SEQUENCE    
  Unsigned32 as mscFrNniCaLinkRate  
  Gauge32 as mscFrNniCaNumberRejectedEgressCirPermConn  
  Gauge32 as mscFrNniCaNumberRejectedEgressEirPermConn  

MscFrNniCaIngCirBPEntry  
SEQUENCE    
  Integer32 as mscFrNniCaIngCirBPIndex  
  Unsigned32 as mscFrNniCaIngCirBPValue  

MscFrNniCaEgCirBpEntry  
SEQUENCE    
  Integer32 as mscFrNniCaEgCirBpIndex  
  Unsigned32 as mscFrNniCaEgCirBpValue  

MscFrNniCaIngCirPoolAdmitBwEntry  
SEQUENCE    
  Integer32 as mscFrNniCaIngCirPoolAdmitBwIndex  
  Gauge32 as mscFrNniCaIngCirPoolAdmitBwValue  

MscFrNniCaIngCirPoolAvailBwEntry  
SEQUENCE    
  Integer32 as mscFrNniCaIngCirPoolAvailBwIndex  
  Gauge32 as mscFrNniCaIngCirPoolAvailBwValue  

MscFrNniCaEgCirPoolAdmitBwEntry  
SEQUENCE    
  Integer32 as mscFrNniCaEgCirPoolAdmitBwIndex  
  Gauge32 as mscFrNniCaEgCirPoolAdmitBwValue  

MscFrNniCaEgCirPoolAvailBwEntry  
SEQUENCE    
  Integer32 as mscFrNniCaEgCirPoolAvailBwIndex  
  Gauge32 as mscFrNniCaEgCirPoolAvailBwValue  

MscFrNniCaIngEirBpEntry  
SEQUENCE    
  Integer32 as mscFrNniCaIngEirBpIndex  
  Unsigned32 as mscFrNniCaIngEirBpValue  

MscFrNniCaEgEirBpEntry  
SEQUENCE    
  Integer32 as mscFrNniCaEgEirBpIndex  
  Unsigned32 as mscFrNniCaEgEirBpValue  

MscFrNniCaIngEirPoolAdmitBwEntry  
SEQUENCE    
  Integer32 as mscFrNniCaIngEirPoolAdmitBwIndex  
  Gauge32 as mscFrNniCaIngEirPoolAdmitBwValue  

MscFrNniCaIngEirPoolAvailBwEntry  
SEQUENCE    
  Integer32 as mscFrNniCaIngEirPoolAvailBwIndex  
  Gauge32 as mscFrNniCaIngEirPoolAvailBwValue  

MscFrNniCaEgEirPoolAdmitBwEntry  
SEQUENCE    
  Integer32 as mscFrNniCaEgEirPoolAdmitBwIndex  
  Gauge32 as mscFrNniCaEgEirPoolAdmitBwValue  

MscFrNniCaEgEirPoolAvailBwEntry  
SEQUENCE    
  Integer32 as mscFrNniCaEgEirPoolAvailBwIndex  
  Gauge32 as mscFrNniCaEgEirPoolAvailBwValue  

MscFrNniCaTpmRowStatusEntry  
SEQUENCE    
  RowStatus as mscFrNniCaTpmRowStatus  
  DisplayString as mscFrNniCaTpmComponentName  
  StorageType as mscFrNniCaTpmStorageType  
  Integer32 as mscFrNniCaTpmIndex  

MscFrNniCaTpmProvEntry  
SEQUENCE    
  Unsigned32 as mscFrNniCaTpmAssignedIngressBandwidthPool  
  Unsigned32 as mscFrNniCaTpmAssignedEgressBandwidthPool