Nortel-MsCarrier-MscPassport-GsmIwfMIB

File: Nortel-MsCarrier-MscPassport-GsmIwfMIB.mib (207766 bytes)

Imported modules

RFC-1212 RFC1155-SMI Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB Nortel-MsCarrier-MscPassport-TextualConventionsMIB

Imported symbols

OBJECT-TYPE IpAddress mscPassportMIBs
mscComponents Counter32 RowPointer
DisplayString StorageType RowStatus
Gauge32 Integer32 Unsigned32
AsciiString NonReplicated Link
FixedPoint2

Defined Objects

mscGsmCs 1.3.6.1.4.1.562.36.2.1.127
OBJECT IDENTIFIER    

mscGsmCsRowStatusTable 1.3.6.1.4.1.562.36.2.1.127.1
This entry controls the addition and deletion of mscGsmCs components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmCsRowStatusEntry

mscGsmCsRowStatusEntry 1.3.6.1.4.1.562.36.2.1.127.1.1
A single entry in the table represents a single mscGsmCs component.
OBJECT-TYPE    
  MscGsmCsRowStatusEntry  

mscGsmCsRowStatus 1.3.6.1.4.1.562.36.2.1.127.1.1.1
This variable is used as the basis for SNMP naming of mscGsmCs components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscGsmCsComponentName 1.3.6.1.4.1.562.36.2.1.127.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscGsmCsStorageType 1.3.6.1.4.1.562.36.2.1.127.1.1.4
This variable represents the storage type value for the mscGsmCs tables.
OBJECT-TYPE    
  StorageType  

mscGsmCsTrunkGrpIndex 1.3.6.1.4.1.562.36.2.1.127.1.1.10
This variable represents the index for the mscGsmCs tables.
OBJECT-TYPE    
  Integer32 1..8191  

mscGsmCsModem 1.3.6.1.4.1.562.36.2.1.127.2
OBJECT IDENTIFIER    

mscGsmCsModemRowStatusTable 1.3.6.1.4.1.562.36.2.1.127.2.1
This entry controls the addition and deletion of mscGsmCsModem components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmCsModemRowStatusEntry

mscGsmCsModemRowStatusEntry 1.3.6.1.4.1.562.36.2.1.127.2.1.1
A single entry in the table represents a single mscGsmCsModem component.
OBJECT-TYPE    
  MscGsmCsModemRowStatusEntry  

mscGsmCsModemRowStatus 1.3.6.1.4.1.562.36.2.1.127.2.1.1.1
This variable is used as the basis for SNMP naming of mscGsmCsModem components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscGsmCsModemComponentName 1.3.6.1.4.1.562.36.2.1.127.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscGsmCsModemStorageType 1.3.6.1.4.1.562.36.2.1.127.2.1.1.4
This variable represents the storage type value for the mscGsmCsModem tables.
OBJECT-TYPE    
  StorageType  

mscGsmCsModemIndex 1.3.6.1.4.1.562.36.2.1.127.2.1.1.10
This variable represents the index for the mscGsmCsModem tables.
OBJECT-TYPE    
  INTEGER v17(0), v21(1), v22(2), v22bis(3), v23(4), v27ter(6), v29(7), v32(8), v32bis(9)  

mscGsmCsRlp 1.3.6.1.4.1.562.36.2.1.127.3
OBJECT IDENTIFIER    

mscGsmCsRlpRowStatusTable 1.3.6.1.4.1.562.36.2.1.127.3.1
This entry controls the addition and deletion of mscGsmCsRlp components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmCsRlpRowStatusEntry

mscGsmCsRlpRowStatusEntry 1.3.6.1.4.1.562.36.2.1.127.3.1.1
A single entry in the table represents a single mscGsmCsRlp component.
OBJECT-TYPE    
  MscGsmCsRlpRowStatusEntry  

mscGsmCsRlpRowStatus 1.3.6.1.4.1.562.36.2.1.127.3.1.1.1
This variable is used as the basis for SNMP naming of mscGsmCsRlp components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscGsmCsRlpComponentName 1.3.6.1.4.1.562.36.2.1.127.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscGsmCsRlpStorageType 1.3.6.1.4.1.562.36.2.1.127.3.1.1.4
This variable represents the storage type value for the mscGsmCsRlp tables.
OBJECT-TYPE    
  StorageType  

mscGsmCsRlpIndex 1.3.6.1.4.1.562.36.2.1.127.3.1.1.10
This variable represents the index for the mscGsmCsRlp tables.
OBJECT-TYPE    
  INTEGER half6kRate(0), full6kRate(1), full12kRate(2), full14k5Rate(3)  

mscGsmCsRlpProvTable 1.3.6.1.4.1.562.36.2.1.127.3.10
This group contains provisionable attributes for the Radio Link Protocol (RLP) parameters used for the call set up by this particular GsmIwfCallServer. Changes to these attributes do not effect existing calls.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmCsRlpProvEntry

mscGsmCsRlpProvEntry 1.3.6.1.4.1.562.36.2.1.127.3.10.1
An entry in the mscGsmCsRlpProvTable.
OBJECT-TYPE    
  MscGsmCsRlpProvEntry  

mscGsmCsRlpHighestVersion 1.3.6.1.4.1.562.36.2.1.127.3.10.1.1
This attribute specifies the highest version of the Radio Link Protocol (RLP) protocol supported on this GsmIwfCallServer. Valid values are: 0, Single-link basic version. 1, Single-link extended version (for example, extended by data compression). During the Exchange Information (XID) negotiation at the start of the call, both RLP entities (mobile station and IWF) can agree to use a particular RLP version. The IWF attempts to negotiate the value specified by this attribute. Note that if V.42bis data compression is be established between the mobile station and IWF, both entities must agree to use version 1 (or higher). The default value for highestVersion is 1 to enable support for V.42bis data compression. The negotiated value can be viewed in the component GsmIwfRlpOp attribute highestVersion. Changes to this attribute do not effect existing calls.
OBJECT-TYPE    
  Unsigned32 0..1  

mscGsmCsRlpIwfToMsWindowSize 1.3.6.1.4.1.562.36.2.1.127.3.10.1.2
This attribute specifies the maximum number of sequentially numbered Information (I) frames that may be outstanding (that is, unacknowledged) at any given time from the IWF to the mobile station. GSM specification 4.22 defines the range as 0 to 61. During the Exchange Information (XID) negotiation, both Radio Link Protocol (RLP) entities (mobile station and IWF) can agree to use a specific window size. The IWF attempts to negotiate to the value specified by this attribute. The negotiated value can be viewed in the component GsmIwfRlpOp attribute iwfToMsWindowSize. Changes to this attribute do not effect existing calls.
OBJECT-TYPE    
  Unsigned32 0..61  

mscGsmCsRlpMsToIwfWindowSize 1.3.6.1.4.1.562.36.2.1.127.3.10.1.3
This attribute specifies the maximum number of sequentially numbered Information (I) frames that may be outstanding (that is, unacknowledged) at any given time from the mobile station to IWF. GSM specification 4.22 defines the range as 0-61. During the Exchange Information (XID) negotiation, both Radio Link Protocol (RLP) entities (mobile station and IWF) can agree to use a specific window size. The IWF attempts to negotiate to the value specified by this attribute. The negotiated value can be viewed in the component GsmIwfRlpOp attribute msToIwfWindowSize. Changes to this attribute do not effect existing calls.
OBJECT-TYPE    
  Unsigned32 0..61  

mscGsmCsRlpT1AckTimer 1.3.6.1.4.1.562.36.2.1.127.3.10.1.4
This attribute specifies the time in milliseconds within which an acknowledgment of a sent frame must be received. Once this timer expires, the transmitting Radio Link Protocol (RLP) entity shall assume that the frame was lost. During the Exchange Information (XID) negotiation, both RLP entities (mobile station and IWF) can agree to use specific value for this timer (T1). The IWF attempts to negotiate to the value specified by this attribute. The default value for t1AckTimer is 520 msec for the full14k5Rate instance of this component, 480 msec for full12kRate, 540 msec for full6kRate, and 780 msec for half6kRate. The negotiated value can be viewed in the component GsmIwfRlpOp attribute t1AckTimer. Changes to this attribute do not effect existing calls.
OBJECT-TYPE    
  Unsigned32 380..1020  

mscGsmCsRlpT2AckDelayTimer 1.3.6.1.4.1.562.36.2.1.127.3.10.1.5
This attribute specifies the maximum time in milliseconds the receiving Radio Link Protocol (RLP) entity shall wait before sending an acknowledgment for a received information frame. During the Exchange Information (XID) negotiation, both RLP entities (mobile station and IWF) can agree to use specific value for this timer (T2). The IWF attempts to negotiate to the value specified by this attribute. The negotiated value can be viewed in the component GsmIwfRlpOp attribute t2AckDelayTimer. Changes to this attribute do not effect existing calls.
OBJECT-TYPE    
  Unsigned32 10..79  

mscGsmCsRlpN2RetransmitCount 1.3.6.1.4.1.562.36.2.1.127.3.10.1.6
This attribute specifies the maximum number of times a Radio Link Protocol (RLP) entity shall retransmit an individual frame following the expiry of timer T1. During the Exchange Information (XID) negotiation, both RLP entities (mobile station and InterWorking Function (IWF)) can agree to use specific value for N2 (Retransmit Count). The IWF attempts to negotiate to the value specified by this attribute. The negotiated value can be viewed in the component GsmIwfRlpOp attribute n2RetransmitCount. Changes to this attribute do not effect existing calls.
OBJECT-TYPE    
  Unsigned32 1..255  

mscGsmCsFax 1.3.6.1.4.1.562.36.2.1.127.4
OBJECT IDENTIFIER    

mscGsmCsFaxRowStatusTable 1.3.6.1.4.1.562.36.2.1.127.4.1
This entry controls the addition and deletion of mscGsmCsFax components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmCsFaxRowStatusEntry

mscGsmCsFaxRowStatusEntry 1.3.6.1.4.1.562.36.2.1.127.4.1.1
A single entry in the table represents a single mscGsmCsFax component.
OBJECT-TYPE    
  MscGsmCsFaxRowStatusEntry  

mscGsmCsFaxRowStatus 1.3.6.1.4.1.562.36.2.1.127.4.1.1.1
This variable is used as the basis for SNMP naming of mscGsmCsFax components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscGsmCsFaxComponentName 1.3.6.1.4.1.562.36.2.1.127.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscGsmCsFaxStorageType 1.3.6.1.4.1.562.36.2.1.127.4.1.1.4
This variable represents the storage type value for the mscGsmCsFax tables.
OBJECT-TYPE    
  StorageType  

mscGsmCsFaxIndex 1.3.6.1.4.1.562.36.2.1.127.4.1.1.10
This variable represents the index for the mscGsmCsFax tables.
OBJECT-TYPE    
  NonReplicated  

mscGsmCsFaxProvTable 1.3.6.1.4.1.562.36.2.1.127.4.10
This group contains the provisionable attributes for the fascimile protocol (T.30 and GSM 03.45) for this particular GsmIwfCallServer. Changes to these attributes do not effect existing calls.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmCsFaxProvEntry

mscGsmCsFaxProvEntry 1.3.6.1.4.1.562.36.2.1.127.4.10.1
An entry in the mscGsmCsFaxProvTable.
OBJECT-TYPE    
  MscGsmCsFaxProvEntry  

mscGsmCsFaxT1CalledToneTimer 1.3.6.1.4.1.562.36.2.1.127.4.10.1.1
This attribute specifies the delay to generate a Called (CED) tone at the IWF after the called station is connected to the line for mobile terminated calls. Changes to this attribute do not effect existing calls.
OBJECT-TYPE    
  FixedPoint2 150..300  

mscGsmCsV42 1.3.6.1.4.1.562.36.2.1.127.5
OBJECT IDENTIFIER    

mscGsmCsV42RowStatusTable 1.3.6.1.4.1.562.36.2.1.127.5.1
This entry controls the addition and deletion of mscGsmCsV42 components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmCsV42RowStatusEntry

mscGsmCsV42RowStatusEntry 1.3.6.1.4.1.562.36.2.1.127.5.1.1
A single entry in the table represents a single mscGsmCsV42 component.
OBJECT-TYPE    
  MscGsmCsV42RowStatusEntry  

mscGsmCsV42RowStatus 1.3.6.1.4.1.562.36.2.1.127.5.1.1.1
This variable is used as the basis for SNMP naming of mscGsmCsV42 components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscGsmCsV42ComponentName 1.3.6.1.4.1.562.36.2.1.127.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscGsmCsV42StorageType 1.3.6.1.4.1.562.36.2.1.127.5.1.1.4
This variable represents the storage type value for the mscGsmCsV42 tables.
OBJECT-TYPE    
  StorageType  

mscGsmCsV42Index 1.3.6.1.4.1.562.36.2.1.127.5.1.1.10
This variable represents the index for the mscGsmCsV42 tables.
OBJECT-TYPE    
  NonReplicated  

mscGsmCsV42ProvTable 1.3.6.1.4.1.562.36.2.1.127.5.10
This group contains the provisionable attributes for the V.42 protocol for this particular GsmIwfCallServer. Changes to these attributes do not effect existing calls.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmCsV42ProvEntry

mscGsmCsV42ProvEntry 1.3.6.1.4.1.562.36.2.1.127.5.10.1
An entry in the mscGsmCsV42ProvTable.
OBJECT-TYPE    
  MscGsmCsV42ProvEntry  

mscGsmCsV42T400DetectTimer 1.3.6.1.4.1.562.36.2.1.127.5.10.1.1
This attribute specifies the maximum amount of time that the IWF waits for an Originator Detection Pattern (ODP) or Answerer Detection Pattern (ADP). ODP/ADP is a series of special bit patterns used during the call setup procedures. If the IWF is the Originator of the call, it starts sending ODP patterns and waits for an ADP for the duration of T400 milliseconds from the answerer at call setup time. If the IWF is the Answerer of the call, it waits for an ODP for T400 seconds from the originator and if it receives during that time it sends an ADP pattern to the originator at the call setup time. Since both sides operate with different values of T400 timer, a higher value increases the chance of a successful call setup. Changes to this attribute do not effect existing calls.
OBJECT-TYPE    
  FixedPoint2 75..254  

mscGsmCsV42T401AckTimer 1.3.6.1.4.1.562.36.2.1.127.5.10.1.2
This attribute specifies the maximum amount of time that the IWF waits for an acknowledgment before retransmitting a frame. Since information about the T401 timer is not carried in the Exchange Identification (XID) negotiations at call setup time, both sides operate with different timer values. The value for T401 depends on many factors, such as propagation delay or frame processing time. A frame is retransmitted up to N400 times if the timer T401 expires before an acknowledgment for a frame is actually received. The performance of the data link layer can be impacted by the value of this timer as retransmissions of frames occur on expiry of timer T401. Changes to this attribute do not effect existing calls.
OBJECT-TYPE    
  FixedPoint2 50..900  

mscGsmCsV42T402AckDelayTimer 1.3.6.1.4.1.562.36.2.1.127.5.10.1.3
This attribute specifies the maximum amount of time that the IWF may wait following the receipt of any frame requiring a reply before it initiates transmission of an appropriate reply in order to ensure that the reply frame is received by the remote error-correcting entity prior to expiration of the T401 timer of the remote error-correcting entity. Since information about the T402 timer is not carried in the Exchange Identification (XID) negotiations at call setup, both sides operate with different timer values. If this timer expires, then the reply that would have been returned prior to its expiration is not sent. The performance of the data link layer can be impacted by the value of this timer as retransmissions of frames occur on expiry of timer T401. For better performance, a value of t402AckDelayTimer (T402) equal to half the value of t401AckTimer (T401) is recommended. Changes to this attribute do not effect existing calls.
OBJECT-TYPE    
  FixedPoint2 25..450  

mscGsmCsV42T403IdleProbeTimer 1.3.6.1.4.1.562.36.2.1.127.5.10.1.4
This attribute specifies the maximum amount of time that the IWF allows to elapse without frames being exchanged. The link is permitted to remain idle with no frames being exchanged on the data link. Upon expiry of this timer, the IWF polls its peer for status. Since information about the T403 timer is not carried in the Exchange Identification (XID) negotiations at call setup time, both sides operate with different timer values. Changes to this attribute do not effect existing calls.
OBJECT-TYPE    
  Unsigned32 30..90  

mscGsmCsV42TxN401FrameSize 1.3.6.1.4.1.562.36.2.1.127.5.10.1.5
This attribute specifies the maximum number of octets that can be carried in the information field of an Information (I) frame, Exchange Identification (XID) frame, and a Unnumbered Information (UI) frame from the IWF to the remote entity. The default value is 128 octets, and no XID negotiations required for txN401FrameSize. If the value for txN401FrameSize value is set to other than 128 octets, then XID frames are exchanged to negotiate a value. The value provided for txN401FrameSize sets up the bounds during XID negotiations. The IWF performs XID negotiations with this value as a minimum or maximum value. If a value greater than 128 is specified, then the IWF negotiates or attempts to negotiate a value between the 128 (as a minimum) and the given value (as a maximum). If a value less than 128 is specified, then the IWF attempts to negotiate a value between the given value (as a minimum) and 128 (as a maximum). Any value can be specified as long as it is within the provisionable limits. However, a value equal to or close to 128 is recommended. The negotiated value can be viewed in the component GsmIwfV42Op attribute txN401FrameSize. Changes to this attribute do not effect existing calls.
OBJECT-TYPE    
  Unsigned32 1..255  

mscGsmCsV42RxN401FrameSize 1.3.6.1.4.1.562.36.2.1.127.5.10.1.6
This attribute specifies the maximum number of octets that can be carried in the information field of an Information (I) frame, Exchange Identification (XID) frame, and a Unnumbered Information (UI) frame from the remote entity to the IWF. The default value is 128 octets, and no XID negotiations are required for rxN401FrameSize. If the value set for rxN401FrameSize is other than 128, XID frames are exchanged to negotiate a value. The value provided for rxN401FrameSize sets up the bounds during XID negotiations. The IWF performs XID negotiations with this value as a minimum or maximum value. If a value greater than 128 is specified, then the IWF attempts to negotiate for a value between 128 (as a minimum) and the given value (as a maximum). If a value less than 128 value is specified, then the IWF attempts to negotiate for a value between the given value (as a minimum) and 128 (as a maximum). Any value can be specified as long as it is within the provisionable limits. However, a value equal to or close to the default is recommended. The negotiated value can be viewed in the component GsmIwfV42Op attribute rxN401FrameSize. Changes to this attribute do not effect existing calls.
OBJECT-TYPE    
  Unsigned32 1..255  

mscGsmCsV42TxKwindowSize 1.3.6.1.4.1.562.36.2.1.127.5.10.1.7
This attribute specifies the maximum number of outstanding unacknowledged sequenced Information (I) frames from the IWF to the remote entity. The default value is 15 frames, and if this value is used then no Exchange Identification (XID) negotiations are required for txKwindowSize. If the value set for txKwindowSize is other than 15, then XID frames are exchanged to negotiate a value. The value provided for txKwindowSize sets up the bounds during XID negotiations. The IWF performs XID negotiations with this value as a minimum or maximum value. If a value greater than 15 is specified, then the IWF attempts to negotiate a value between 15 (as a minimum) and the given value (as a maximum). If a value less than 15 is specified, then the IWF attempts to negotiate for a value between the given value (as a minimum) and 15 (as a maximum). Any value can be specified as long at it is within the provisionable limits. However, a value equal to or close to the default is recommended. The negotiated value can be viewed in the component GsmIwfV42Op attribute txKwindowSize. Changes to this attribute do not effect existing calls.
OBJECT-TYPE    
  Unsigned32 1..255  

mscGsmCsV42RxKwindowSize 1.3.6.1.4.1.562.36.2.1.127.5.10.1.8
This attribute specifies the maximum number of outstanding unacknowledged sequenced Information (I) frames from the remote entity to the IWF. The default value is 15 frames, and if this value is used then no Exchange Identification (XID) negotiations are required for rxKwindowSize. If the value set for rxKwindowSize is other than 15, then XID frames are exchanged to negotiate a value. The value provided for rxKwindowSize sets up the bounds during XID negotiations. The IWF performs XID negotiations with this value as a minimum or maximum value. If a value greater than 15 is specified, then the IWF attempts to negotiate a value between 15 (as a minimum) and the given value (as a maximum). If a value less than 15 is specified, then the IWF attempts to negotiate for a value between the given value (as a minimum) and 15 (as a maximum). Any value can be specified as long as it is within the provisionable limits. However, a value equal to or close to the default is recommended. The negotiated value can be viewed in the component GsmIwfV42Op attribute rxKwindowSize. Changes to this attribute do not effect existing calls.
OBJECT-TYPE    
  Unsigned32 1..255  

mscGsmCsV42N400RetransLimit 1.3.6.1.4.1.562.36.2.1.127.5.10.1.9
This attribute specifies the maximum number of times the IWF retransmits a frame upon expiry of t401AckTimer before appropriate recovery action is taken. Information about N400 (Retransmission Limit) is not carried in the Exchange Identification (XID) negotiation at call setup time so both sides operate with different N400 values. Changes to this attribute do not effect existing calls.
OBJECT-TYPE    
  Unsigned32 0..255  

mscGsmCsV42bis 1.3.6.1.4.1.562.36.2.1.127.6
OBJECT IDENTIFIER    

mscGsmCsV42bisRowStatusTable 1.3.6.1.4.1.562.36.2.1.127.6.1
This entry controls the addition and deletion of mscGsmCsV42bis components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmCsV42bisRowStatusEntry

mscGsmCsV42bisRowStatusEntry 1.3.6.1.4.1.562.36.2.1.127.6.1.1
A single entry in the table represents a single mscGsmCsV42bis component.
OBJECT-TYPE    
  MscGsmCsV42bisRowStatusEntry  

mscGsmCsV42bisRowStatus 1.3.6.1.4.1.562.36.2.1.127.6.1.1.1
This variable is used as the basis for SNMP naming of mscGsmCsV42bis components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscGsmCsV42bisComponentName 1.3.6.1.4.1.562.36.2.1.127.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscGsmCsV42bisStorageType 1.3.6.1.4.1.562.36.2.1.127.6.1.1.4
This variable represents the storage type value for the mscGsmCsV42bis tables.
OBJECT-TYPE    
  StorageType  

mscGsmCsV42bisIndex 1.3.6.1.4.1.562.36.2.1.127.6.1.1.10
This variable represents the index for the mscGsmCsV42bis tables.
OBJECT-TYPE    
  NonReplicated  

mscGsmCsV42bisProvTable 1.3.6.1.4.1.562.36.2.1.127.6.10
This group contains the provisionable attributes for the V.42bis data compression protocol parameters used for the calls set up by this particular GsmIwfCallServer. Changes to these attributes do not effect existing calls.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmCsV42bisProvEntry

mscGsmCsV42bisProvEntry 1.3.6.1.4.1.562.36.2.1.127.6.10.1
An entry in the mscGsmCsV42bisProvTable.
OBJECT-TYPE    
  MscGsmCsV42bisProvEntry  

mscGsmCsV42bisCompressionDirection 1.3.6.1.4.1.562.36.2.1.127.6.10.1.1
This attribute specifies the V.42bis data compression direction to be supported. The value for compression direction is negotiated at link setup by the data link protocol by way of the Exchange Identification (XID) negotiation of parameter P0 (compression direction). During XID negotiation of parameter P0, both sides (IWF and mobile or IWF and Public Switched Telephone Network (PSTN)) agree on the compression direction. Valid values are: none, No compression is present. encode, The data sent by the IWF to the other entity is compressed. decode, The data received by the IWF from the other entity is compressed. both, The data sent and received by the IWF is compressed. The negotiated value can be viewed in the component GsmIwfV42bisOp attribute compressionDirection. Changes to this attribute do not effect existing calls.
OBJECT-TYPE    
  INTEGER none(0), encode(1), decode(2), both(3)  

mscGsmCsV42bisMaximumCodewords 1.3.6.1.4.1.562.36.2.1.127.6.10.1.2
This attribute specifies the maximum number of V.42bis codewords the IWF supports. A codeword is a binary number that represents a string of characters in compressed form. V.42bis keeps a dictionary of codewords for each compression direction. During Exchange Identification (XID) negotiation of parameter P1 (number of codewords), both sides (IWF and mobile or IWF and Public Switched Telephone Network (PSTN)) agree on the total number of codewords in the dictionaries. Changes to this attribute impact the compression ratio for the encoder (component GsmV42BisOp attribute compRatioEncoder). Changes also impact the amount of memory used (more memory is used when increasing the attribute). The gain in performance obtained from the selection of a larger dictionary may be offset by the larger codeword size needed, and for certain types of data, better performance may be obtained by using a smaller dictionary. The negotiated value can be viewed in the component GsmIwfV42bisOp attribute maximumCodewords . Changes to this attribute do not effect existing calls.
OBJECT-TYPE    
  Unsigned32 512 | 1024 | 2048 | 4096  

mscGsmCsV42bisMaximumStringSize 1.3.6.1.4.1.562.36.2.1.127.6.10.1.3
This attribute specifies the maximum number of characters allowed in a string represented by a codeword that the IWF supports. Each codeword in a V.42bis dictionary represents a string of characters. During Exchange Identification (XID) negotiation of parameter P2 (maximum string size), both sides (IWF and mobile or IWF and Public Switched Telephone Network (PSTN)) agree on the maximum string length to be used in the dictionaries. Changes to this attribute impact the compression ratio for the encoder (component GsmIwfV42bisOp attribute compRatioEncoder). The negotiated value can be viewed in the component GsmIwfV42bisOp attribute maximumStringSize. Changes to this attribute do not effect existing calls.
OBJECT-TYPE    
  Unsigned32 6..250  

mscGsmCsV42bisActionOnError 1.3.6.1.4.1.562.36.2.1.127.6.10.1.4
This attribute specifies whether or not V.42bis takes down the call or resets the link when any of the following errors occur: 1.Receipt of STEPUP (step up codeword size) codeword when it would cause C2 (current code word size) to exceed N1 (maximum code word size). 2. Receipt of a codeword, at any time, equal to C1 (next empty dictionary entry). 3. Receipt of a codeword representing an empty dictionary entry. 4. Receipt of a reserved command code. 5. Receipt of any other error. If the value is resetLink, the error corrected connection and V.42bis dictionaries are reset. Some data is lost but the call continues. If the value is takeDownCall, the call is taken down. Changes to this attribute do not effect existing calls.
OBJECT-TYPE    
  INTEGER resetLink(0), takeDownCall(1)  

mscGsmCsLp 1.3.6.1.4.1.562.36.2.1.127.7
OBJECT IDENTIFIER    

mscGsmCsLpRowStatusTable 1.3.6.1.4.1.562.36.2.1.127.7.1
This entry controls the addition and deletion of mscGsmCsLp components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmCsLpRowStatusEntry

mscGsmCsLpRowStatusEntry 1.3.6.1.4.1.562.36.2.1.127.7.1.1
A single entry in the table represents a single mscGsmCsLp component.
OBJECT-TYPE    
  MscGsmCsLpRowStatusEntry  

mscGsmCsLpRowStatus 1.3.6.1.4.1.562.36.2.1.127.7.1.1.1
This variable is used as the basis for SNMP naming of mscGsmCsLp components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscGsmCsLpComponentName 1.3.6.1.4.1.562.36.2.1.127.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscGsmCsLpStorageType 1.3.6.1.4.1.562.36.2.1.127.7.1.1.4
This variable represents the storage type value for the mscGsmCsLp tables.
OBJECT-TYPE    
  StorageType  

mscGsmCsLpIndex 1.3.6.1.4.1.562.36.2.1.127.7.1.1.10
This variable represents the index for the mscGsmCsLp tables.
OBJECT-TYPE    
  Integer32 0..15  

mscGsmCsLpOperTable 1.3.6.1.4.1.562.36.2.1.127.7.10
This group contains operational attributes pertaining to information about GsmIwfBearerChannels and logical processors associated with a GsmIwfCallServer from a high-level view.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmCsLpOperEntry

mscGsmCsLpOperEntry 1.3.6.1.4.1.562.36.2.1.127.7.10.1
An entry in the mscGsmCsLpOperTable.
OBJECT-TYPE    
  MscGsmCsLpOperEntry  

mscGsmCsLpConfiguredBearerChannels 1.3.6.1.4.1.562.36.2.1.127.7.10.1.1
This attribute indicates the number of GsmIwfBearerChannel components provisioned for the Logical Processor represented by this component.
OBJECT-TYPE    
  Unsigned32 0..124  

mscGsmCsLpActiveCalls 1.3.6.1.4.1.562.36.2.1.127.7.10.1.2
This attribute indicates the number of GsmIwfBearerChannel components currently active on this LogicalProcessor.
OBJECT-TYPE    
  Gauge32 0..124  

mscGsmCsLpAssignedCapacity 1.3.6.1.4.1.562.36.2.1.127.7.10.1.3
This attribute indicates what percentage (0 to 100%) of a given LogicalProcessor has been reserved for the data calls which are currently active. When the assignedCapacity reaches 100%, no new calls are established on the given LogicalProcessor. During the life of a call, the compute requirements will vary. The compute capacity required for a given call type depends on the type of call established including such factors as connection type, data compression, user rate, error correction, flow control; therefore, at call establishment the compute capacity is added to the assignedCapacity for a LogicalProcessor. When the call is released, it's compute capacity is subtracted from the assigned capacity for the Lp.The GsmIwfCallServer uses this information to balance the distribution of data calls across the logical processors.
OBJECT-TYPE    
  Unsigned32 0..100  

mscGsmCsLpModemsSupported 1.3.6.1.4.1.562.36.2.1.127.7.10.1.4
This attribute indicates if modems are supported with this LogicalProcessor.
OBJECT-TYPE    
  INTEGER yes(0), no(1)  

mscGsmCsProvTable 1.3.6.1.4.1.562.36.2.1.127.100
This group contains general provisioning data for the GsmIwfCallServer that does not fit within other provisioning groups.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmCsProvEntry

mscGsmCsProvEntry 1.3.6.1.4.1.562.36.2.1.127.100.1
An entry in the mscGsmCsProvTable.
OBJECT-TYPE    
  MscGsmCsProvEntry  

mscGsmCsCommentText 1.3.6.1.4.1.562.36.2.1.127.100.1.1
Use of this attribute is at the discretion of the system administrator. Typically, this attribute specifies the name of the trunk group at the Mobile Services-switching Center (MSC) configured for this GsmIwfCallServer plus any other commentary information.
OBJECT-TYPE    
  AsciiString SIZE(0..40)  

mscGsmCsMscIpAddress 1.3.6.1.4.1.562.36.2.1.127.100.1.2
This attribute specifies the Internetwork Protocol (IP) Address of the Mobile Services-switching Center (MSC) Control Module (CM) that is permitted to set up GSM InterWorking Function (IWF) calls using this GsmIwfCallServer. This address must be specified in order for this GsmIwfCallServer to provide service. If call setups are attempted from an MSC which does not have this address, those calls are rejected. The callsRequested statistic of this GsmIwfCallServer is incremented, but the callsSetup statistic of this GsmIwfCallServer is not, when call setup attempts are rejected. Also, at the MSC, appropriate call failure logs are generated.
OBJECT-TYPE    
  IpAddress  

mscGsmCsVirtualRouterName 1.3.6.1.4.1.562.36.2.1.127.100.1.4
This attribute specifies the VirtualRouter that this GsmIwfCallServer uses to transmit signaling messages to and receive signaling messages from the Mobile Services-switching Center (MSC) that utilizes this GsmIwfCallServer.
OBJECT-TYPE    
  RowPointer  

mscGsmCsVoiceLaw 1.3.6.1.4.1.562.36.2.1.127.100.1.5
This attribute specifies the voice law to be established for the IWF to Public Switched Telephone Network (PSTN) modem link for calls established by this GsmIwfCallServer. Valid values are: aLaw, a protocol for encoding voice-band audio, Pulse Code Modulation (PCM). muLaw, a protocol for encoding voice-band audio, PCM. Note that this value must match the voice law used at the Mobile Services-switching Center (MSC) connected to this GsmIwfCallServer.
OBJECT-TYPE    
  INTEGER aLaw(0), muLaw(1)  

mscGsmCsCidDataTable 1.3.6.1.4.1.562.36.2.1.127.103
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmCsCidDataEntry

mscGsmCsCidDataEntry 1.3.6.1.4.1.562.36.2.1.127.103.1
An entry in the mscGsmCsCidDataTable.
OBJECT-TYPE    
  MscGsmCsCidDataEntry  

mscGsmCsCustomerIdentifier 1.3.6.1.4.1.562.36.2.1.127.103.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

mscGsmCsStateTable 1.3.6.1.4.1.562.36.2.1.127.104
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmCsStateEntry

mscGsmCsStateEntry 1.3.6.1.4.1.562.36.2.1.127.104.1
An entry in the mscGsmCsStateTable.
OBJECT-TYPE    
  MscGsmCsStateEntry  

mscGsmCsAdminState 1.3.6.1.4.1.562.36.2.1.127.104.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscGsmCsOperationalState 1.3.6.1.4.1.562.36.2.1.127.104.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscGsmCsUsageState 1.3.6.1.4.1.562.36.2.1.127.104.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscGsmCsStatsTable 1.3.6.1.4.1.562.36.2.1.127.121
This group contains operational attributes that measure the performance of this particular GsmIwfCallServer.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmCsStatsEntry

mscGsmCsStatsEntry 1.3.6.1.4.1.562.36.2.1.127.121.1
An entry in the mscGsmCsStatsTable.
OBJECT-TYPE    
  MscGsmCsStatsEntry  

mscGsmCsCurrentCalls 1.3.6.1.4.1.562.36.2.1.127.121.1.1
This attribute indicates the number of active calls currently serviced by this particular GsmIwfCallServer.
OBJECT-TYPE    
  Gauge32 0..2047  

mscGsmCsCallsRequested 1.3.6.1.4.1.562.36.2.1.127.121.1.2
This attribute counts the number of IWF call setup requests received at this particular GsmIwfCallServer from the Mobile Services- switching Center (MSC). The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmCsCallsSetup 1.3.6.1.4.1.562.36.2.1.127.121.1.3
This attribute counts the number of IWF calls successfully setup by this particular GsmIwfCallServer. A call is considered setup when the IWF-Setup-Request message is received, indicating a request for a data communications service, and the IWF has successfully allocated the necessary resources to fulfill the request. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmCsCallsActivated 1.3.6.1.4.1.562.36.2.1.127.121.1.4
This attribute counts the number of IWF calls successfully activated by this particular GsmIwfCallServer. A call is considered activated when the IWF receives an IWF-Activate-Request, indicating that the call parties are connected and that data communications must begin. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmCsCallsReleasedNormal 1.3.6.1.4.1.562.36.2.1.127.121.1.5
This attribute counts the number of IWF calls that have completed successfully on this particular GsmIwfCallServer. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmCsCallsReleasedAbnormal 1.3.6.1.4.1.562.36.2.1.127.121.1.6
This attribute counts the number of IWF calls that have been released due to error conditions at this particular GsmIwfCallServer or one if its GsmIwfBearerChannels. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmCsChannelConfigChanges 1.3.6.1.4.1.562.36.2.1.127.121.1.7
This attribute counts the number of channel configuration requests from the Mobile-services Switching Center (MSC) that have been received at this GsmIwfCallServer and have resulted in successful responses. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmCsChannelModeModifyRequests 1.3.6.1.4.1.562.36.2.1.127.121.1.8
This attribute counts the number of channel mode modify requests that have been generated by fax calls serviced by this particular GsmIwfCallServer. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmCsStatusMessagesRx 1.3.6.1.4.1.562.36.2.1.127.121.1.9
This attribute counts the number of status messages received from the Mobile Services-switching Center (MSC). The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmCsErroredMipFrames 1.3.6.1.4.1.562.36.2.1.127.121.1.10
This attribute counts the number of MSC/IWF Interface Protocol (MIP) messages received from the Mobile Services-switching Center (MSC) that were in error. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBc 1.3.6.1.4.1.562.36.2.1.128
OBJECT IDENTIFIER    

mscGsmBcRowStatusTable 1.3.6.1.4.1.562.36.2.1.128.1
This entry controls the addition and deletion of mscGsmBc components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcRowStatusEntry

mscGsmBcRowStatusEntry 1.3.6.1.4.1.562.36.2.1.128.1.1
A single entry in the table represents a single mscGsmBc component.
OBJECT-TYPE    
  MscGsmBcRowStatusEntry  

mscGsmBcRowStatus 1.3.6.1.4.1.562.36.2.1.128.1.1.1
This variable is used as the basis for SNMP naming of mscGsmBc components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscGsmBcComponentName 1.3.6.1.4.1.562.36.2.1.128.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscGsmBcStorageType 1.3.6.1.4.1.562.36.2.1.128.1.1.4
This variable represents the storage type value for the mscGsmBc tables.
OBJECT-TYPE    
  StorageType  

mscGsmBcTrunkGrpIndex 1.3.6.1.4.1.562.36.2.1.128.1.1.10
This variable represents an index for the mscGsmBc tables.
OBJECT-TYPE    
  Integer32 1..8191  

mscGsmBcCicIndex 1.3.6.1.4.1.562.36.2.1.128.1.1.11
This variable represents an index for the mscGsmBc tables.
OBJECT-TYPE    
  Integer32 1..2047  

mscGsmBcFramer 1.3.6.1.4.1.562.36.2.1.128.2
OBJECT IDENTIFIER    

mscGsmBcFramerRowStatusTable 1.3.6.1.4.1.562.36.2.1.128.2.1
This entry controls the addition and deletion of mscGsmBcFramer components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcFramerRowStatusEntry

mscGsmBcFramerRowStatusEntry 1.3.6.1.4.1.562.36.2.1.128.2.1.1
A single entry in the table represents a single mscGsmBcFramer component.
OBJECT-TYPE    
  MscGsmBcFramerRowStatusEntry  

mscGsmBcFramerRowStatus 1.3.6.1.4.1.562.36.2.1.128.2.1.1.1
This variable is used as the basis for SNMP naming of mscGsmBcFramer components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscGsmBcFramerComponentName 1.3.6.1.4.1.562.36.2.1.128.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscGsmBcFramerStorageType 1.3.6.1.4.1.562.36.2.1.128.2.1.1.4
This variable represents the storage type value for the mscGsmBcFramer tables.
OBJECT-TYPE    
  StorageType  

mscGsmBcFramerIndex 1.3.6.1.4.1.562.36.2.1.128.2.1.1.10
This variable represents the index for the mscGsmBcFramer tables.
OBJECT-TYPE    
  NonReplicated  

mscGsmBcFramerProvTable 1.3.6.1.4.1.562.36.2.1.128.2.10
This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcFramerProvEntry

mscGsmBcFramerProvEntry 1.3.6.1.4.1.562.36.2.1.128.2.10.1
An entry in the mscGsmBcFramerProvTable.
OBJECT-TYPE    
  MscGsmBcFramerProvEntry  

mscGsmBcFramerInterfaceName 1.3.6.1.4.1.562.36.2.1.128.2.10.1.1
This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run.
OBJECT-TYPE    
  Link  

mscGsmBcFramerStatsTable 1.3.6.1.4.1.562.36.2.1.128.2.11
This group contains the operational statistics data for a Framer component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcFramerStatsEntry

mscGsmBcFramerStatsEntry 1.3.6.1.4.1.562.36.2.1.128.2.11.1
An entry in the mscGsmBcFramerStatsTable.
OBJECT-TYPE    
  MscGsmBcFramerStatsEntry  

mscGsmBcFramerFrmToIf 1.3.6.1.4.1.562.36.2.1.128.2.11.1.1
This attribute counts the number of frames transmitted to the link interface by Framer. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcFramerFrmFromIf 1.3.6.1.4.1.562.36.2.1.128.2.11.1.2
This attribute counts the number of frames received from the link interface by Framer. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcFramerOctetFromIf 1.3.6.1.4.1.562.36.2.1.128.2.11.1.3
This attribute counts the number of bytes received from the link interface by Framer. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcFramerCrcErrors 1.3.6.1.4.1.562.36.2.1.128.2.11.1.5
This attribute coutns the the total number of frames with CRC errors, occurring in the receive direction from the link. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcFramerLrcErrors 1.3.6.1.4.1.562.36.2.1.128.2.11.1.6
This attribute counts the total number of frames with LRC errors, occurring in the Tx link prior to transmission onto the link. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcFramerNonOctetErrors 1.3.6.1.4.1.562.36.2.1.128.2.11.1.7
This attribute counts the total number of frames that were non octet aligned. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcFramerOverruns 1.3.6.1.4.1.562.36.2.1.128.2.11.1.8
This attribute counts the total number of frames received from the link for which overruns occurred. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcFramerUnderruns 1.3.6.1.4.1.562.36.2.1.128.2.11.1.9
This attributecounts the total number of frames transmitted to the link for which underruns occurred. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcFramerLinkTable 1.3.6.1.4.1.562.36.2.1.128.2.12
This group contains provisionable attributes for the GsmIwfFramer which controls link layer framing for application components sending and receiving data on a link interface for this particular GsmIwfBearerChannel.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcFramerLinkEntry

mscGsmBcFramerLinkEntry 1.3.6.1.4.1.562.36.2.1.128.2.12.1
An entry in the mscGsmBcFramerLinkTable.
OBJECT-TYPE    
  MscGsmBcFramerLinkEntry  

mscGsmBcFramerFramingType 1.3.6.1.4.1.562.36.2.1.128.2.12.1.1
This attribute indicates the type of framing for the link layer data received and transmitted on this channel. Valid values are: BtdsFraming, bit transparent framing required for the GsmIwfBearerChannel components on MVP cards. GsmFraming, GSM framing for the GsmIwfBearerChannel components on DS1C/E1C cards.
OBJECT-TYPE    
  INTEGER btdsFraming(2), gsmFraming(8)  

mscGsmBcFramerStateTable 1.3.6.1.4.1.562.36.2.1.128.2.13
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcFramerStateEntry

mscGsmBcFramerStateEntry 1.3.6.1.4.1.562.36.2.1.128.2.13.1
An entry in the mscGsmBcFramerStateTable.
OBJECT-TYPE    
  MscGsmBcFramerStateEntry  

mscGsmBcFramerAdminState 1.3.6.1.4.1.562.36.2.1.128.2.13.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscGsmBcFramerOperationalState 1.3.6.1.4.1.562.36.2.1.128.2.13.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscGsmBcFramerUsageState 1.3.6.1.4.1.562.36.2.1.128.2.13.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscGsmBcLayer1 1.3.6.1.4.1.562.36.2.1.128.3
OBJECT IDENTIFIER    

mscGsmBcLayer1RowStatusTable 1.3.6.1.4.1.562.36.2.1.128.3.1
This entry controls the addition and deletion of mscGsmBcLayer1 components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcLayer1RowStatusEntry

mscGsmBcLayer1RowStatusEntry 1.3.6.1.4.1.562.36.2.1.128.3.1.1
A single entry in the table represents a single mscGsmBcLayer1 component.
OBJECT-TYPE    
  MscGsmBcLayer1RowStatusEntry  

mscGsmBcLayer1RowStatus 1.3.6.1.4.1.562.36.2.1.128.3.1.1.1
This variable is used as the basis for SNMP naming of mscGsmBcLayer1 components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscGsmBcLayer1ComponentName 1.3.6.1.4.1.562.36.2.1.128.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscGsmBcLayer1StorageType 1.3.6.1.4.1.562.36.2.1.128.3.1.1.4
This variable represents the storage type value for the mscGsmBcLayer1 tables.
OBJECT-TYPE    
  StorageType  

mscGsmBcLayer1Index 1.3.6.1.4.1.562.36.2.1.128.3.1.1.10
This variable represents the index for the mscGsmBcLayer1 tables.
OBJECT-TYPE    
  NonReplicated  

mscGsmBcLayer1OperTable 1.3.6.1.4.1.562.36.2.1.128.3.10
This group contains physical layer operational attributes concerning the operation of this particular GsmIwfBearerChannel.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcLayer1OperEntry

mscGsmBcLayer1OperEntry 1.3.6.1.4.1.562.36.2.1.128.3.10.1
An entry in the mscGsmBcLayer1OperTable.
OBJECT-TYPE    
  MscGsmBcLayer1OperEntry  

mscGsmBcLayer1ActiveMode 1.3.6.1.4.1.562.36.2.1.128.3.10.1.1
This attribute indicates the active physical layer protocol between the mobile and the IWF. Valid values are: v110, GSM V.110 rate adaptation scheme for interworking V-series connections to an Integrated Services Digital Network (ISDN). aTrau, GSM A-Transcoder/Rate Adaptor (A-TRAU).
OBJECT-TYPE    
  INTEGER v110(0), aTrau(1)  

mscGsmBcLayer1Connection 1.3.6.1.4.1.562.36.2.1.128.3.10.1.2
This attribute indicates the connection between the mobile and the IWF. Valid values are: transparent, Constant throughput, constant transit delay, and variable error rate (does not use Radio Link Protocol). nonTransparent, Improved error rate with variable transit delay and variable throughput (uses Radio Link Protocol).
OBJECT-TYPE    
  INTEGER transparent(0), nonTransparent(1)  

mscGsmBcLayer1DataRate 1.3.6.1.4.1.562.36.2.1.128.3.10.1.3
This attribute indicates the layer 1 user data rate for the currently active call for this GsmIwfBearerChannel. This is the data rate between the mobile and IWF.
OBJECT-TYPE    
  Unsigned32 0..64000  

mscGsmBcLayer1IntermediateRate 1.3.6.1.4.1.562.36.2.1.128.3.10.1.10
This attribute indicates the intermediate rate used in the physical layer rate adaptation process. This field is valid between the mobile and the IWF. For user data rates of 300 bit/s - 4800 bit/s the intermediate rate is 8 kbit/s. For user data rates 9600 bit/s and above the intermediate rate is 16 kbit/s.
OBJECT-TYPE    
  Unsigned32 8 | 16  

mscGsmBcLayer1StatsTable 1.3.6.1.4.1.562.36.2.1.128.3.11
This group contains physical layer statistics concerning the operation of this particular GsmIwfBearerChannel.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcLayer1StatsEntry

mscGsmBcLayer1StatsEntry 1.3.6.1.4.1.562.36.2.1.128.3.11.1
An entry in the mscGsmBcLayer1StatsTable.
OBJECT-TYPE    
  MscGsmBcLayer1StatsEntry  

mscGsmBcLayer1FramesTx 1.3.6.1.4.1.562.36.2.1.128.3.11.1.1
This attribute counts the number of frames transmitted on the link. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcLayer1FramesRx 1.3.6.1.4.1.562.36.2.1.128.3.11.1.2
This attribute counts the number of frames received on the link. Discarded frames are not included in this count. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcLayer1BytesTx 1.3.6.1.4.1.562.36.2.1.128.3.11.1.3
This attribute counts number of bytes transmitted on the link. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcLayer1BytesRx 1.3.6.1.4.1.562.36.2.1.128.3.11.1.4
This attribute counts the number of bytes received on the link. Bytes from discarded frames are not included in this count. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcLayer1UnderRunsTx 1.3.6.1.4.1.562.36.2.1.128.3.11.1.5
This attribute counts number of underruns, on a per-call basis, in the transmit direction reported by the hardware on the mobile-side.. These frames are not counted towards the number of frames transmitted (framesTx). The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcLayer1OverRunsRx 1.3.6.1.4.1.562.36.2.1.128.3.11.1.6
This attribute counts number of overruns, on a per-call basis, in the receive direction reported by the hardware on the mobile-side. These frames are discarded. These frames are not counted towards the number of frames received (framesRx). The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcLayer1NonOctetErrorsRx 1.3.6.1.4.1.562.36.2.1.128.3.11.1.7
This attribute counts the number of non-octet synchronous frame errors, on a per-call basis, received on the link reported by the hardware. This is when a frame whose bit content was not divisible by eight was detected. These frames are discarded. These frames are not counted towards the number of frames received (framesRx). The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcLayer1LargeFrameErrorsRx 1.3.6.1.4.1.562.36.2.1.128.3.11.1.8
This attribute counts the number of frames, on a per-call basis, received on the link that exceeded internal buffer limits reported by the hardware. A large number of these errors could indicate a bad physical medium. These frames are discarded. These frames are not counted towards the number of frames received (framesRx). The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcLayer1FramesDiscarded 1.3.6.1.4.1.562.36.2.1.128.3.11.1.9
This attribute counts the number of frames discarded, on a per-call basis, in the receive direction by software due to frame errors. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcLayer1LrcErrorsTx 1.3.6.1.4.1.562.36.2.1.128.3.11.1.10
This attribute counts the number of corrupted frames, on a per-call basis, due to memory inconsistencies found by Longitude Redundancy Check (LRC) checks at the IWF. These frames are not counted towards the number of frames transmitted (framesTx). The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcModem 1.3.6.1.4.1.562.36.2.1.128.4
OBJECT IDENTIFIER    

mscGsmBcModemRowStatusTable 1.3.6.1.4.1.562.36.2.1.128.4.1
This entry controls the addition and deletion of mscGsmBcModem components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcModemRowStatusEntry

mscGsmBcModemRowStatusEntry 1.3.6.1.4.1.562.36.2.1.128.4.1.1
A single entry in the table represents a single mscGsmBcModem component.
OBJECT-TYPE    
  MscGsmBcModemRowStatusEntry  

mscGsmBcModemRowStatus 1.3.6.1.4.1.562.36.2.1.128.4.1.1.1
This variable is used as the basis for SNMP naming of mscGsmBcModem components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscGsmBcModemComponentName 1.3.6.1.4.1.562.36.2.1.128.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscGsmBcModemStorageType 1.3.6.1.4.1.562.36.2.1.128.4.1.1.4
This variable represents the storage type value for the mscGsmBcModem tables.
OBJECT-TYPE    
  StorageType  

mscGsmBcModemIndex 1.3.6.1.4.1.562.36.2.1.128.4.1.1.10
This variable represents the index for the mscGsmBcModem tables.
OBJECT-TYPE    
  NonReplicated  

mscGsmBcModemOperTable 1.3.6.1.4.1.562.36.2.1.128.4.10
This group contains operational attributes that measure performance of the modem component for this particular GsmIwfBearerChannel.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcModemOperEntry

mscGsmBcModemOperEntry 1.3.6.1.4.1.562.36.2.1.128.4.10.1
An entry in the mscGsmBcModemOperTable.
OBJECT-TYPE    
  MscGsmBcModemOperEntry  

mscGsmBcModemRate 1.3.6.1.4.1.562.36.2.1.128.4.10.1.2
This attribute indicates the transmission rate of the current modem in use. A rate of 1200_75 is 75 bit/s in the transmit direction and 1200 bit/s in the receive direction. All other rates are the same in both the transmit and receive directions.
OBJECT-TYPE    
  INTEGER n300(0), n600(1), n1200(2), n120075(3), n2400(4), n4800(5), n7200(6), n9600(7), n12000(8), n14400(9), n16800(10), n19200(11), n21600(12), n24000(13), n26400(14), n28800(15), n31200(16), n32000(17), n33600(18), n38400(19), n43200(20), n48000(21), n56000(22), n57600(23), n64000(24)  

mscGsmBcModemAlgorithmInUse 1.3.6.1.4.1.562.36.2.1.128.4.10.1.3
This attribute indicates the current modem algorithm(s) active for the channel. Valid values are: v17, V.17 is active.V.17 is an ITU-T 14400bit/s modem standard. v27ter, V.27ter is active. V.27ter is an ITU-T 7200bit/s modem standard. v29, V.29 is active. V.29 an ITU-T 9600bit/s modem standard. v21, V.21 active. V.21 is an ITU-4 300bit/s modem standard. v22bis, V.22 or V.22bis active. V.22 ia an ITU-T modem standard that operates at 1200bit/s and 600 baud. V.22bis is an ITU-T modem standard that operates at 2400bit/s and 600 baud. v23, V.23 active. V.23 is an ITU-T modem standard that operates at a speed of 1200bit/s. v26ter, V.26ter active. V.26ter is an ITU-T modem standard that operates at a speed of 2400bit/s. v32bis, V.32 or V.32bis active. V.32 is an ITU-T modem standard that operates at 9600bit/s and 2400 baud. V.32bis is an ITU-T modem standard that operates at a speed of 14.4kbit/s. v34, V.34 active. V.34 is an ITU-T modem standard that operates at a speed of up to 28.8kbit/s. Description of bits: notused0(0) v17(1) v29(2) v27ter(3) v21(4) v22bis(5) v23(6) v26ter(7) v32bis(8) v34(9)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

mscGsmBcModemProtocolState 1.3.6.1.4.1.562.36.2.1.128.4.10.1.4
This attribute indicates the active protocol state of the modem in use.Valid values are: idle, Modem is in an inactive state and has no current connection established. training, Modem is attempting to establish a connection with the far end modem via handshaking. connected, Modem has establish a connection with the far end modem.
OBJECT-TYPE    
  INTEGER idle(0), training(1), connected(2)  

mscGsmBcModemReceiverTransmitter 1.3.6.1.4.1.562.36.2.1.128.4.10.1.5
This attribute indicates whether the fax data modem is in receive or transmit mode. If this is not a fax data modem call, then the value is set to notApplicable. Valid values are: notApplicable, Not an applicable field. rxOnTxOff, Receiver is on, transmitter is off. rxOffTxOn, Receiver is off, transmitter is on. rxTxOn, Reciever is on, transmitter is on.
OBJECT-TYPE    
  INTEGER notApplicable(0), rxOnTxOff(1), rxOffTxOn(2), rxTxOn(3)  

mscGsmBcModemTraining 1.3.6.1.4.1.562.36.2.1.128.4.10.1.6
This attribute indicates the training procedure used by the V.17 modems. ITU-T defines two training procedures. A longer training procedure used at call setup, and a short training procedure is used during the fax call when switching from the V.21 modem to the V.17 modem. A value of notApplicable indicates that the attribute is not applicable for the modem.
OBJECT-TYPE    
  INTEGER short(0), long(1), notApplicable(99)  

mscGsmBcModemToUpperFlowControlActive 1.3.6.1.4.1.562.36.2.1.128.4.10.1.8
This attribute indicates whether flow control was requested and an indication was sent to an upper layer protocol.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscGsmBcModemToDspFlowControlActive 1.3.6.1.4.1.562.36.2.1.128.4.10.1.9
This attribute indicates whether an upper layer protocol requested flow control and an indication was sent to the Digital Signal Processor.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscGsmBcModemAsyncMode 1.3.6.1.4.1.562.36.2.1.128.4.10.1.10
This attribute indicates whether conversion between synchronous and asynchronous data format (specifacally, the stripping or insertion of start and stop bits) is being performed. The value will be on unless the V.42 layer is active or it is a fax call.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscGsmBcModemAutoHdlcMode 1.3.6.1.4.1.562.36.2.1.128.4.10.1.11
This attribute indicates whether High-Level Data Link Control (HDLC) functions are being performed by the modem to support HDLC applications (V.42 for example).
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscGsmBcModemOutbandFlowControl 1.3.6.1.4.1.562.36.2.1.128.4.10.1.12
This attribute indicates whether inband or outband flow control conversions are being performed. The modem performs either inband or outband flow control unless V.42 layer is active, it is a fax call, or no flow control was specified by the MSC.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscGsmBcModemOutbandBreak 1.3.6.1.4.1.562.36.2.1.128.4.10.1.13
This attribute indicates whether inband or outband break control conversions are being performed. This is when the modem detects a break condition as defined by ITU-T X.28 and reports it. When a break condition is discovered all subsequent incoming data is discarded until a start bit is received.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscGsmBcModemAutobaud 1.3.6.1.4.1.562.36.2.1.128.4.10.1.14
This attribute indicates whether autobaud is active. The modem is instructed at call setup time by the MSC on: What is the initial modem data rate value and Whether a modem is allowed to perform autobauding (on) or not (off). With Autobauding on, the modem is allowed to connect using a valid modem data rate less than or equal to the initial rate specified to the modem by the MSC. If a modem can not perform autobauding and the carrier can not be established at the initial data rate, the modem is disabled.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscGsmBcModemStatsTable 1.3.6.1.4.1.562.36.2.1.128.4.11
This group contains operational attributes that measure performance of the modem component for this particular GsmIwfBearerChannel.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcModemStatsEntry

mscGsmBcModemStatsEntry 1.3.6.1.4.1.562.36.2.1.128.4.11.1
An entry in the mscGsmBcModemStatsTable.
OBJECT-TYPE    
  MscGsmBcModemStatsEntry  

mscGsmBcModemBytesTx 1.3.6.1.4.1.562.36.2.1.128.4.11.1.1
This attribute counts the number of payload bytes transmitted. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcModemBytesRx 1.3.6.1.4.1.562.36.2.1.128.4.11.1.2
This attribute counts the number of payload bytes received. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcModemFramingErrors 1.3.6.1.4.1.562.36.2.1.128.4.11.1.6
This attribute counts the number of framing errors detected by the hardware. This is the absence of a stop bit after a start bit and eight bits of data. All incoming data is discarded until the next start bit is received. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcV110 1.3.6.1.4.1.562.36.2.1.128.5
OBJECT IDENTIFIER    

mscGsmBcV110RowStatusTable 1.3.6.1.4.1.562.36.2.1.128.5.1
This entry controls the addition and deletion of mscGsmBcV110 components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcV110RowStatusEntry

mscGsmBcV110RowStatusEntry 1.3.6.1.4.1.562.36.2.1.128.5.1.1
A single entry in the table represents a single mscGsmBcV110 component.
OBJECT-TYPE    
  MscGsmBcV110RowStatusEntry  

mscGsmBcV110RowStatus 1.3.6.1.4.1.562.36.2.1.128.5.1.1.1
This variable is used as the basis for SNMP naming of mscGsmBcV110 components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscGsmBcV110ComponentName 1.3.6.1.4.1.562.36.2.1.128.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscGsmBcV110StorageType 1.3.6.1.4.1.562.36.2.1.128.5.1.1.4
This variable represents the storage type value for the mscGsmBcV110 tables.
OBJECT-TYPE    
  StorageType  

mscGsmBcV110Index 1.3.6.1.4.1.562.36.2.1.128.5.1.1.10
This variable represents the index for the mscGsmBcV110 tables.
OBJECT-TYPE    
  NonReplicated  

mscGsmBcV110OperTable 1.3.6.1.4.1.562.36.2.1.128.5.10
This group contains operational attributes that measure the performance of V110.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcV110OperEntry

mscGsmBcV110OperEntry 1.3.6.1.4.1.562.36.2.1.128.5.10.1
An entry in the mscGsmBcV110OperTable.
OBJECT-TYPE    
  MscGsmBcV110OperEntry  

mscGsmBcV110DataRate 1.3.6.1.4.1.562.36.2.1.128.5.10.1.2
This attribute contains the layer 1 user data rate for the currently active call for this GsmIwfBearerChannel. This is the data rate between the IWF and the fixed network.
OBJECT-TYPE    
  Unsigned32 0..65000  

mscGsmBcV110IntermediateRate 1.3.6.1.4.1.562.36.2.1.128.5.10.1.9
This attribute indicates the intermediate rate used in the physical layer rate adaptation process. This field is valid between the network and the IWF. For user data rates of 300 bit/s to 4800 bit/s the intermediate rate is 8 kbit/s. For a user data rate of 9600 bit/s the intermediate rate is 16 kbit/s. For user data rates of 1200 bit/s to 19200 bit/s the intermediate rate is 32 kbit/s. Data rates above this have no intermediate rate.
OBJECT-TYPE    
  INTEGER n8KbitS(0), n16KbitS(1), n32KbitS(2), notApplicable(3)  

mscGsmBcV110StatsTable 1.3.6.1.4.1.562.36.2.1.128.5.11
This group contains statistical attributes which measure the performance of V110.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcV110StatsEntry

mscGsmBcV110StatsEntry 1.3.6.1.4.1.562.36.2.1.128.5.11.1
An entry in the mscGsmBcV110StatsTable.
OBJECT-TYPE    
  MscGsmBcV110StatsEntry  

mscGsmBcV110FramesTx 1.3.6.1.4.1.562.36.2.1.128.5.11.1.1
This attribute counts the number of frames transmitted on the link. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcV110FramesRx 1.3.6.1.4.1.562.36.2.1.128.5.11.1.2
This attribute counts the number of frames received on the link. Discarded frames are not included in this count. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcV110BytesTx 1.3.6.1.4.1.562.36.2.1.128.5.11.1.3
This attribute counts the number of bytes transmitted on the link. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcV110BytesRx 1.3.6.1.4.1.562.36.2.1.128.5.11.1.4
This attribute counts the number of bytes received on the link. Bytes from discarded frames are not included in this count. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcV110UnderRunsTx 1.3.6.1.4.1.562.36.2.1.128.5.11.1.5
This attribute counts the number of underruns, on a per-call basis, in the transmit direction reported by the hardware on the network side. These frames are not counted towards the number of frames transmitted (framesTx). The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcV110OverRunsRx 1.3.6.1.4.1.562.36.2.1.128.5.11.1.6
This attribute counts the number of overruns, on a per-call basis, in the receive direction reported by the hardware on the network side. These frames are discarded. These frames are not counted towards the number of frames received (framesRx). The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcV110NonOctetErrorsRx 1.3.6.1.4.1.562.36.2.1.128.5.11.1.7
This attribute counts the number of non-octet synchronous frame errors, on a per-call basis, received on the link reported by the hardware. These frames are discarded. These frames are not counted towards the number of frames received (framesRx). The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcV110LargeFrameErrorsRx 1.3.6.1.4.1.562.36.2.1.128.5.11.1.8
This attribute counts the number of frames received on the link that exceeded internal buffer limits reported by the hardware, on a per- call basis. These frames are discarded. These frames are not counted towards the number of frames received (framesRx). The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcV110FramesDiscarded 1.3.6.1.4.1.562.36.2.1.128.5.11.1.9
This attribute counts the number of frames discarded, on a per-call basis, in the receive direction by software due to frame errors. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcV110LrcErrorsTx 1.3.6.1.4.1.562.36.2.1.128.5.11.1.10
This attribute counts the number of corrupted frames, on a per-call basis, due to memory inconsistencies found by Longitude Redundancy Check (LRC) checks at the IWF. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcFax 1.3.6.1.4.1.562.36.2.1.128.6
OBJECT IDENTIFIER    

mscGsmBcFaxRowStatusTable 1.3.6.1.4.1.562.36.2.1.128.6.1
This entry controls the addition and deletion of mscGsmBcFax components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcFaxRowStatusEntry

mscGsmBcFaxRowStatusEntry 1.3.6.1.4.1.562.36.2.1.128.6.1.1
A single entry in the table represents a single mscGsmBcFax component.
OBJECT-TYPE    
  MscGsmBcFaxRowStatusEntry  

mscGsmBcFaxRowStatus 1.3.6.1.4.1.562.36.2.1.128.6.1.1.1
This variable is used as the basis for SNMP naming of mscGsmBcFax components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscGsmBcFaxComponentName 1.3.6.1.4.1.562.36.2.1.128.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscGsmBcFaxStorageType 1.3.6.1.4.1.562.36.2.1.128.6.1.1.4
This variable represents the storage type value for the mscGsmBcFax tables.
OBJECT-TYPE    
  StorageType  

mscGsmBcFaxIndex 1.3.6.1.4.1.562.36.2.1.128.6.1.1.10
This variable represents the index for the mscGsmBcFax tables.
OBJECT-TYPE    
  NonReplicated  

mscGsmBcFaxOperTable 1.3.6.1.4.1.562.36.2.1.128.6.10
This group contains operational attributes which measure the performance of the fax protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcFaxOperEntry

mscGsmBcFaxOperEntry 1.3.6.1.4.1.562.36.2.1.128.6.10.1
An entry in the mscGsmBcFaxOperTable.
OBJECT-TYPE    
  MscGsmBcFaxOperEntry  

mscGsmBcFaxActiveMode 1.3.6.1.4.1.562.36.2.1.128.6.10.1.1
This attribute indicates the mode of the fax T.30 protocol, determined during Exchange Identification (XID) negotiations. The following modes are supported: normal, normal T.30 protocol, Error Correction Mode (ECM) not used ecm, Error Correction Mode used. Fax error correction is done using a half-duplex page selective repeat technique.
OBJECT-TYPE    
  INTEGER normal(0), ecm(1)  

mscGsmBcFaxProtocolState 1.3.6.1.4.1.562.36.2.1.128.6.10.1.2
This attribute indicates the protocol state of the fax adaptor. The values are: setup, call setup state idle, idle state only transmitting Synchronize (SYNC) frames bcsRx, receiving Binary Coded Signal (BCS) packet from modem bcsTx, transmitting BCS packet to modem msgRx, receiving fax message from modem msgTx, transmitting fax message to modem
OBJECT-TYPE    
  INTEGER setup(0), idle(1), bcsRx(2), bcsTx(3), msgRx(4), msgTx(5)  

mscGsmBcFaxMessageRate 1.3.6.1.4.1.562.36.2.1.128.6.10.1.3
This attribute indicates the fax message rate used for sending fax documents.
OBJECT-TYPE    
  Unsigned32 0..65000  

mscGsmBcFaxStatsTable 1.3.6.1.4.1.562.36.2.1.128.6.11
This group contains statistical attributes which measure the performance of the fax protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcFaxStatsEntry

mscGsmBcFaxStatsEntry 1.3.6.1.4.1.562.36.2.1.128.6.11.1
An entry in the mscGsmBcFaxStatsTable.
OBJECT-TYPE    
  MscGsmBcFaxStatsEntry  

mscGsmBcFaxMessageFramesRx 1.3.6.1.4.1.562.36.2.1.128.6.11.1.1
This attribute counts the number of fax message frames received from the mobile. One fax message frame is an eight byte DATA frame defined in GSM 3.45. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcFaxMessageFramesTx 1.3.6.1.4.1.562.36.2.1.128.6.11.1.2
This attribute counts the number of fax message frames transmitted to the mobile. One fax message frame is an eight byte DATA frame defined in GSM 3.45. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcFaxBcsFramesRx 1.3.6.1.4.1.562.36.2.1.128.6.11.1.3
This attribute counts the number of fax Binary Coded Signal (BCS) frames received from the mobile. A fax BCS frame is an 8-byte STATUS frame, which carries T.30 BCS data as defined in GSM 3.45. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcFaxBcsFramesTx 1.3.6.1.4.1.562.36.2.1.128.6.11.1.4
This attribute counts the number of fax Binary Coded Signal (BCS) frames transmitted to the mobile. A fax BCS frame is an 8-byte STATUS frame, which carries T.30 BCS data as defined in GSM 3.45. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcFaxPagesRxFromMobile 1.3.6.1.4.1.562.36.2.1.128.6.11.1.5
This attribute counts the number of fax pages received from the mobile. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcFaxPagesTxToMobile 1.3.6.1.4.1.562.36.2.1.128.6.11.1.6
The attribute counts the number of fax pages transmitted to the mobile. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcFaxChannelModeModify 1.3.6.1.4.1.562.36.2.1.128.6.11.1.7
This attribute counts the number of Channel Mode Modify (CMM) requests initiated by the IWF. For transparent fax calls, the transmission speed is determined by the two fax machines at call setup. The speed may change during the transmission to satisfy the T.30 protocol. The CMM request is used by the GSM IWF to request that the T.30 requested speed change can be propagated throughout the network. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcFaxBcsFrameErrors 1.3.6.1.4.1.562.36.2.1.128.6.11.1.8
This attribute counts the number of fax Binary Coded Signal (BCS) frames in error. This attribute indicates the count of corrupted fax BCS frames over the GSM radio channel. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcRlp 1.3.6.1.4.1.562.36.2.1.128.7
OBJECT IDENTIFIER    

mscGsmBcRlpRowStatusTable 1.3.6.1.4.1.562.36.2.1.128.7.1
This entry controls the addition and deletion of mscGsmBcRlp components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcRlpRowStatusEntry

mscGsmBcRlpRowStatusEntry 1.3.6.1.4.1.562.36.2.1.128.7.1.1
A single entry in the table represents a single mscGsmBcRlp component.
OBJECT-TYPE    
  MscGsmBcRlpRowStatusEntry  

mscGsmBcRlpRowStatus 1.3.6.1.4.1.562.36.2.1.128.7.1.1.1
This variable is used as the basis for SNMP naming of mscGsmBcRlp components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscGsmBcRlpComponentName 1.3.6.1.4.1.562.36.2.1.128.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscGsmBcRlpStorageType 1.3.6.1.4.1.562.36.2.1.128.7.1.1.4
This variable represents the storage type value for the mscGsmBcRlp tables.
OBJECT-TYPE    
  StorageType  

mscGsmBcRlpIndex 1.3.6.1.4.1.562.36.2.1.128.7.1.1.10
This variable represents the index for the mscGsmBcRlp tables.
OBJECT-TYPE    
  NonReplicated  

mscGsmBcRlpOperTable 1.3.6.1.4.1.562.36.2.1.128.7.10
This group contains operational attributes that measure performance of the GsmIwfBearerChannel.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcRlpOperEntry

mscGsmBcRlpOperEntry 1.3.6.1.4.1.562.36.2.1.128.7.10.1
An entry in the mscGsmBcRlpOperTable.
OBJECT-TYPE    
  MscGsmBcRlpOperEntry  

mscGsmBcRlpProtocolState 1.3.6.1.4.1.562.36.2.1.128.7.10.1.1
This attribute indicates the last Radio Link Protocol (RLP) state before call take down. The following are the states: detached, Initial State. The call has not even started. disconnected, Asynchronous Disconnected Mode (ADM). connPending, In ADM, but sent Set Asynchronous Balanced Mode (SABM) and waiting for a response. discPending, Sent Disconnect (DISC), waiting for a response. connectEstablished, In Asynchronous Balanced Mode (ABM), Information frames can be exchanged. synchronized, Synchronization state entered after a change of channel coding. Handles REMAP procedure.
OBJECT-TYPE    
  INTEGER detached(0), disconnected(1), connPending(2), discPending(3), connectEstablished(4), synchronized(5)  

mscGsmBcRlpFrameSize 1.3.6.1.4.1.562.36.2.1.128.7.10.1.2
This attribute indicates the current Radio Link Protocol (RLP) frame size transmitted. The size of the frame depends on the radio channel type. The frames can be 240 bits long for 12 kbit/s and 6 kbit/s or 576 bits long for 14.5 kbit/s.
OBJECT-TYPE    
  Unsigned32 0..65000  

mscGsmBcRlpHighestVersion 1.3.6.1.4.1.562.36.2.1.128.7.10.1.3
This attribute indicates the current highest version of the Radio Link Protocol (RLP) protocol negotiated by the Radio Link Protocol (RLP), during Exchange Information (XID). Valid values are: 0, Single-link basic version. 1, Single-link extended version (for example, extended by data compression). The value used for XID negotiations can be provisioned by component GsmIwfRadioLinkProtocol attribute highestVersion.
OBJECT-TYPE    
  Unsigned32 0..1  

mscGsmBcRlpIwfToMsWindowSize 1.3.6.1.4.1.562.36.2.1.128.7.10.1.4
This attribute indicates the current IWF to mobile window size negotiated by the Radio Link Protocol (RLP) during Exchange Information (XID). The window size is the maximum number of sequentially numbered Information (I) frames that may be unacknowledged at any given time. GSM specification 4.22 defines the range as 0 to 61. The value used for XID negotiations can be provisioned by component GsmIwfRadioLinkProtocol attribute iwftoMsWindowSize.
OBJECT-TYPE    
  Unsigned32 0..61  

mscGsmBcRlpMsToIwfWindowSize 1.3.6.1.4.1.562.36.2.1.128.7.10.1.5
This attribute indicates the current mobile to IWF window size negotiated by the Radio Link Protocol (RLP), during Exchange Information (XID). The window size is the maximum number of sequentially numbered Information (I) frames that may be unacknowledged at any given time. GSM specification 4.22 defines the range as 0 to 61. The value used for XID negotiations can be provisioned by component GsmIwfRadioLinkProtocol attribute msToIwfWindowSize.
OBJECT-TYPE    
  Unsigned32 0..61  

mscGsmBcRlpT1AckTimer 1.3.6.1.4.1.562.36.2.1.128.7.10.1.6
This attribute indicates the current T1 timer negotiated by the Radio Link Protocol (RLP), during Exchange Information (XID). This is the period in milliseconds within which an acknowledgment of a sent frame must be received. Once this timer expires, the transmitting RLP entity shall assume that the frame was lost. The value used for XID negotiations can be provisioned by component GsmIwfRadioLinkProtocol attribute t1AckTimer.
OBJECT-TYPE    
  Unsigned32 380..1020  

mscGsmBcRlpT2AckDelayTimer 1.3.6.1.4.1.562.36.2.1.128.7.10.1.7
This attribute indicates the current T2 timer negotiated by the Radio Link Protocol (RLP), during Exchange Information (XID). This is the maximum period in milliseconds the receiving RLP entity shall wait before sending an acknowledgment for a received in sequenced frame. The value used for XID negotiations can be provisioned by component GsmIwfRadioLinkProtocol attribute t2AckDelayTimer.
OBJECT-TYPE    
  Unsigned32 10..70  

mscGsmBcRlpN2RetransmitCount 1.3.6.1.4.1.562.36.2.1.128.7.10.1.8
This attribute indicates the current value of N2 negotiated by the Radio Link Protocol (RLP), during Exchange Information (XID). This is the maximum number of times a RLP entity shall retransmit an individual frame following the expiry of timer T1. The value used for XID negotiations can be provisioned by component GsmIwfRadioLinkProtocol attribute n2RetransmitCount.
OBJECT-TYPE    
  Unsigned32 0..255  

mscGsmBcRlpStatsTable 1.3.6.1.4.1.562.36.2.1.128.7.11
This group contains operational attributes that measure performance of the GsmIwfBearerChannel.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcRlpStatsEntry

mscGsmBcRlpStatsEntry 1.3.6.1.4.1.562.36.2.1.128.7.11.1
An entry in the mscGsmBcRlpStatsTable.
OBJECT-TYPE    
  MscGsmBcRlpStatsEntry  

mscGsmBcRlpIFramesTx 1.3.6.1.4.1.562.36.2.1.128.7.11.1.1
This attribute counts the number of valid Information frames transmitted. This count does not include the Information frames discarded. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcRlpIFramesRx 1.3.6.1.4.1.562.36.2.1.128.7.11.1.2
This attributes counts the number of valid Information (I) frames received. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcRlpFramesRetransmitted 1.3.6.1.4.1.562.36.2.1.128.7.11.1.3
This attribute counts the total number of frames retransmitted. Frames that are not acknowledged within the T1 timer are retransmitted. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcRlpT1AckTimeouts 1.3.6.1.4.1.562.36.2.1.128.7.11.1.4
This attribute counts the total number of T1 timer time-outs. Retransmission of all unacknowledged frames is started after T1 timer expiry. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcRlpInvalidFrames 1.3.6.1.4.1.562.36.2.1.128.7.11.1.5
This attribute counts the number of invalid frames received. These invalid frames are frames received from the mobile which contain errors in the header information. This count does not include the number of frames with Cyclic Redundancy Check (CRC) errors or out-of-sequence Frame Errors. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcRlpCrcErrorsRx 1.3.6.1.4.1.562.36.2.1.128.7.11.1.6
This attribute counts the number of frames with Cyclic Redundancy Check (CRC) errors received by the IWF Radio Link Protocol (RLP) entity. CRC is a type of block check character that is very effective in detecting communications errors. CRCs are commonly 16 or 32 bits long (though, in GSM non-transparent services, a 24- bit CRC is used). The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcRlpOutOfSequenceFrames 1.3.6.1.4.1.562.36.2.1.128.7.11.1.7
This attribute counts the number of out-of-sequence Information frames received by the IWF Radio Link Protocol (RLP) entity. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcRlpRemoteBusyIndications 1.3.6.1.4.1.562.36.2.1.128.7.11.1.8
This attribute counts the number of times the mobile Radio Link Protocol (RLP) entity is busy (that is, it is in Asynchronous Balanced Mode (ABM) and is not ready to receive Information frames). The RLP entity is considered to be not ready to receive information frames if the mobile sends a flow control indication RNR (Receive Not Ready). A Receive Ready is sent to the RLP entity when the mobile is ready to receive data. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcRlpLocalBusyIndications 1.3.6.1.4.1.562.36.2.1.128.7.11.1.9
This attribute counts the number of times the IWF RLP entity is busy (that is it is in Asynchronous Balanced Mode (ABM) and is not ready to receive Information frames). When the network side introduces flow control towards the mobile and a Receive Not Ready (RNR) is sent to the mobile to stop the mobile from sending any more data frames. A Receive Ready (RR) is sent to the mobile when the RLP entity is ready to receive data. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcRlpIFramesTxDiscarded 1.3.6.1.4.1.562.36.2.1.128.7.11.1.10
This attribute counts the number of frames discarded by the IWF. Untransmitted and unacknowledged frames are discarded when a Set Asynchronous Balanced Mode (SABM) or Disconnect (DISC) is received or sent in Asynchronous Balanced Mode (ABM) mode. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcRlpResetsRx 1.3.6.1.4.1.562.36.2.1.128.7.11.1.11
This attribute counts the number of resets sent by the mobile. Loss of information may occur when a reset is issued. A reset is issued by the mobile on failure of checkpoint recovery. That is if the mobile does not receive acknowledgment for its information frame, it does checkpoint recovery (it sends a supervisory frame requesting the status of the other entity. If the responding entity fails to respond to N2 of this checkpoint frame a reset is initiated by the originating entity. A reset can also be issued by the mobile during handover where a loss of connection or synchronization occurs. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcV42 1.3.6.1.4.1.562.36.2.1.128.8
OBJECT IDENTIFIER    

mscGsmBcV42RowStatusTable 1.3.6.1.4.1.562.36.2.1.128.8.1
This entry controls the addition and deletion of mscGsmBcV42 components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcV42RowStatusEntry

mscGsmBcV42RowStatusEntry 1.3.6.1.4.1.562.36.2.1.128.8.1.1
A single entry in the table represents a single mscGsmBcV42 component.
OBJECT-TYPE    
  MscGsmBcV42RowStatusEntry  

mscGsmBcV42RowStatus 1.3.6.1.4.1.562.36.2.1.128.8.1.1.1
This variable is used as the basis for SNMP naming of mscGsmBcV42 components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscGsmBcV42ComponentName 1.3.6.1.4.1.562.36.2.1.128.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscGsmBcV42StorageType 1.3.6.1.4.1.562.36.2.1.128.8.1.1.4
This variable represents the storage type value for the mscGsmBcV42 tables.
OBJECT-TYPE    
  StorageType  

mscGsmBcV42Index 1.3.6.1.4.1.562.36.2.1.128.8.1.1.10
This variable represents the index for the mscGsmBcV42 tables.
OBJECT-TYPE    
  NonReplicated  

mscGsmBcV42OperTable 1.3.6.1.4.1.562.36.2.1.128.8.10
This group contains operational attributes which measure V.42 error detection and correction performance.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcV42OperEntry

mscGsmBcV42OperEntry 1.3.6.1.4.1.562.36.2.1.128.8.10.1
An entry in the mscGsmBcV42OperTable.
OBJECT-TYPE    
  MscGsmBcV42OperEntry  

mscGsmBcV42ProtocolState 1.3.6.1.4.1.562.36.2.1.128.8.10.1.1
This attribute indicates the state of V.42. Valid states are: notActive, The V.42 link connection with the Public Switched Telephoned Network) PSTN modem is not established. None of the V.42 functions including the error detection, error correction, and flow control is provided to the data call. This is the initial state of V.42. disconnected, This means that the V42 link is disconnected. linksetup, The V.42 operation enters this state from the disconnected state after the V.42 sends to the PSTN modem a Set Asynchronous Balanced Mode Extended (SABME) frame in an attempt to establish the error control connection with the PSTN modem. frameReject, The V.42 operation enters into this state after it identifies an invalid frame sent by the peer and it sends back a frame reject (FRMR) frame to the peer. disconnectRequest, The V.42 operation enters into this state after it sends to the peer a disconnect (DISC) frame with the attempt to disconnect the V.42 error control link. informationTransfer, The V.42 enters into this state after it receives a UA (unnumbered acknowledgment) frame which the peer sent upon receipt of the SAMBE frame from IWF V.42. Once in this state, the V.42 can exchange data and supervisory information with its peer. waitingAck, The V.42 enters this state after it sends polling enquiry to its peer. The V.42 sends the polling enquiry when it receives a reject frame (REJ) from its peer or either its acknowledgment timer or inactivity timer timed out on the information frames sent out.
OBJECT-TYPE    
  INTEGER notActive(0), disconnected(1), linksetup(2), frameReject(3), disconnectRequest(4), informationTransfer(5), waitingAck(6)  

mscGsmBcV42TxN401FrameSize 1.3.6.1.4.1.562.36.2.1.128.8.10.1.2
This attribute indicates the current value of parameter N401 for V.42 which is negotiated during Exchange Information (XID). This is the maximum number of octets that can be carried in the information field of an information frame that the IWF V.42 transmits to the Public Switched Telephone Network (PSTN) modem. The IWF V.42 puts this or even smaller size of data into the outgoing information frame. The value used for XID negotiations can be provisioned by component GsmIwfV42 attribute txN401FrameSize.
OBJECT-TYPE    
  Unsigned32 0..65355  

mscGsmBcV42RxN401FrameSize 1.3.6.1.4.1.562.36.2.1.128.8.10.1.3
This attribute indicates the current value of N401, that is negotiated during Exchange Identification (XID). This is the maximum number of octets that can be carried in the information field of an information frame received from the Public Switched Telephone Network (PSTN) modem. An incoming information frame carrying data octets more than this size shall be rejected by the IWF V.42. The value used for XID negotiations can be provisioned by component GsmIwfV42 attribute rxN401FrameSize.
OBJECT-TYPE    
  Unsigned32 1..255  

mscGsmBcV42TxKwindowSize 1.3.6.1.4.1.562.36.2.1.128.8.10.1.4
This attribute indicates the current value of k, that is negotiated during Exchange Identification (XID). This is the size of flow control sliding window used for the information frames that the V.42 transmits to the Public Switched Telephone Network (PSTN) modem. This size governs the maximum number of information frames that the IWF V.42 error-correcting entity can have outstanding (that is, unacknowledged). The value used for XID negotiations can be provisioned by component GsmIwfV42 attribute txKwindowSize.
OBJECT-TYPE    
  Unsigned32 0..127  

mscGsmBcV42RxKwindowSize 1.3.6.1.4.1.562.36.2.1.128.8.10.1.5
This attribute indicates the current value of k that is negotiated during Exchange Identification (XID). This is the size of flow control sliding window used for information frames transmitted from the Public Switched Telephone Network (PSTN) modem. This size governs the maximum number of information frames that the peer of the IWF V.42 error-correcting entity can have outstanding (that is, unacknowledged). The value used for XID negotiations can be provisioned by component GsmIwfV42 attribute rxKwindowSize.
OBJECT-TYPE    
  Unsigned32 1..127  

mscGsmBcV42StatsTable 1.3.6.1.4.1.562.36.2.1.128.8.11
This group contains statistical attributes that measure the V.42 error detection and correction performance.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcV42StatsEntry

mscGsmBcV42StatsEntry 1.3.6.1.4.1.562.36.2.1.128.8.11.1
An entry in the mscGsmBcV42StatsTable.
OBJECT-TYPE    
  MscGsmBcV42StatsEntry  

mscGsmBcV42IBytesRx 1.3.6.1.4.1.562.36.2.1.128.8.11.1.1
This attribute counts the total number of bytes that the V.42 actually received from the Public Switched Telephone Network (PSTN) modem in a data call. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcV42IBytesTx 1.3.6.1.4.1.562.36.2.1.128.8.11.1.2
This attribute counts the total number of bytes that the V.42 transmitted to the Public Switched Telephone Network (PSTN) modem in a data call. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcV42IFramesRx 1.3.6.1.4.1.562.36.2.1.128.8.11.1.3
This attribute counts the total number of Information (I) frames that the V.42 received from the Public Switched Telephone Network (PSTN) modem in a data call. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcV42IFramesTx 1.3.6.1.4.1.562.36.2.1.128.8.11.1.4
This attribute counts the total number of information frames that the V.42 transmitted to the Public Switched Telephone Network (PSTN) modem in a data call. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcV42FramesRetransmitted 1.3.6.1.4.1.562.36.2.1.128.8.11.1.5
This attribute counts the total number of frames retransmitted by the IWF V.42 entity in a data call. The V.42 retransmits the same frame when the associated T401 acknowledgment timer time-outs or when a Reject (REJ) supervisory frame has been received from the Public Switched Telephone Network (PSTN) modem. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcV42T1AckTimeouts 1.3.6.1.4.1.562.36.2.1.128.8.11.1.6
This attribute counts the total number of times that the T401 timer has timed out within a data call. If this timer times-out frequently, the operator may need to adjust the provisional parameter T401 acknowledgment timer to a larger time amount, since every time that V.42 sends out a frame it sets the T401 timer to wait for the peer's acknowledgment of the frame. When the timer times-out and no acknowledgment has been received, the V.42 sends the same frame to its peer. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcV42RemoteBusyIndications 1.3.6.1.4.1.562.36.2.1.128.8.11.1.7
This attribute counts the total number of times the Public Switched Telephone Network (PSTN) modem enters a busy state (the IWF has received a Receive Not Ready message) and asks the IWF V.42 not to send Information (I) frames to it until it is ready to receive information frames again (indicated by receipt of a Receive Ready message or a data message). The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcV42LocalBusyIndications 1.3.6.1.4.1.562.36.2.1.128.8.11.1.8
This attribute counts the total number of times the IWF V.42 enters in a busy condition and asks the peer to stop sending information frames until it has cleared up from the busy condition. The V.42 enters busy condition when its data buffer is about to be overflowed by the incoming Information (I) frames. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcV42BadFramesRx 1.3.6.1.4.1.562.36.2.1.128.8.11.1.9
This attribute counts the total number of bad frames the IWF V.42 has received from the Public Switched Telephone Network (PSTN) remote modem within the data call. In this instance, 'bad frames' refer to the V.42 protocol error frames other than the check sequence error frames. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcV42CrcErrorsRx 1.3.6.1.4.1.562.36.2.1.128.8.11.1.10
This attribute counts the total number of frames received from the remote Public Switched Telephone Network (PSTN) modem that contain incorrect frame check sequence. A high value signifies the condition of the physical medium is poor. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcV42bis 1.3.6.1.4.1.562.36.2.1.128.9
OBJECT IDENTIFIER    

mscGsmBcV42bisRowStatusTable 1.3.6.1.4.1.562.36.2.1.128.9.1
This entry controls the addition and deletion of mscGsmBcV42bis components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcV42bisRowStatusEntry

mscGsmBcV42bisRowStatusEntry 1.3.6.1.4.1.562.36.2.1.128.9.1.1
A single entry in the table represents a single mscGsmBcV42bis component.
OBJECT-TYPE    
  MscGsmBcV42bisRowStatusEntry  

mscGsmBcV42bisRowStatus 1.3.6.1.4.1.562.36.2.1.128.9.1.1.1
This variable is used as the basis for SNMP naming of mscGsmBcV42bis components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscGsmBcV42bisComponentName 1.3.6.1.4.1.562.36.2.1.128.9.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscGsmBcV42bisStorageType 1.3.6.1.4.1.562.36.2.1.128.9.1.1.4
This variable represents the storage type value for the mscGsmBcV42bis tables.
OBJECT-TYPE    
  StorageType  

mscGsmBcV42bisIndex 1.3.6.1.4.1.562.36.2.1.128.9.1.1.10
This variable represents the index for the mscGsmBcV42bis tables.
OBJECT-TYPE    
  NonReplicated  

mscGsmBcV42bisOperTable 1.3.6.1.4.1.562.36.2.1.128.9.10
This group contains operational attributes that measure the performance of V.42bis.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcV42bisOperEntry

mscGsmBcV42bisOperEntry 1.3.6.1.4.1.562.36.2.1.128.9.10.1
An entry in the mscGsmBcV42bisOperTable.
OBJECT-TYPE    
  MscGsmBcV42bisOperEntry  

mscGsmBcV42bisProtocolModeEncoder 1.3.6.1.4.1.562.36.2.1.128.9.10.1.1
This attribute indicates the current mode of the V.42bis encoder. This mode can be either: transparent - A mode of operation in which compression has been selected but data is being transmitted in uncompressed form. Transparent mode command sequences may be inserted into the data stream. compressed - A mode of operation in which data is transmitted in codewords. The encoder switches between the two modes depending on whether the data coming from the Date Terminal Equipment (DTE) is suitable for compression. The data comression function periodically determines the compressibility of the data based on a comparison of the number of bits required to represent a segment of the data stream before and after compression.
OBJECT-TYPE    
  INTEGER transparent(0), compressed(1)  

mscGsmBcV42bisProtocolModeDecoder 1.3.6.1.4.1.562.36.2.1.128.9.10.1.2
This attribute indicates the current mode of the V.42bis decoder. This mode can be either: transparent - A mode of operation in which compression has been selected but data is being transmitted in uncompressed form. Transparent mode command sequences may be inserted into the data stream. compressed - A mode of operation in which data is transmitted in codewords. The encoder (at the mobile or Public Switched Telephone Network) switches between the two modes depending on whether the data coming from the Date Terminal Equipment (DTE) is suitable for compression. The data comression function periodically determines the compressibility of the data based on a comparison of the number of bits required to represent a segment of the data stream before and after compression.
OBJECT-TYPE    
  INTEGER transparent(0), compressed(1)  

mscGsmBcV42bisCompressionDirection 1.3.6.1.4.1.562.36.2.1.128.9.10.1.3
This attribute indicates the direction in which V.42bis is active, negotiated at link setup by the data link protocol through Exchange Identification (XID) negotiation of parameter P0 (compression direction). The value used for XID negotiations can be provisioned by component GsmIwfV42bisProv attribute compressionDirection. Valid values are: none, No compression is present. encode, The data sent by the IWF to the other entity is compressed. decode, The data received by the IWF from the other entity is compressed. both, The data sent and received by the IWF is compressed.
OBJECT-TYPE    
  INTEGER none(0), encode(1), decode(2), both(3)  

mscGsmBcV42bisMaximumCodewords 1.3.6.1.4.1.562.36.2.1.128.9.10.1.4
This attribute indicates the maximum number of codewords in the dictionary negotiated at link setup by the data link protocol by way of the Exchange Identification (XID) negotiation of parameter P1 (number of codewords). The value used for XID negotiations can be provisioned by component GsmIwfV42bisProv attribute maximumCodewords.
OBJECT-TYPE    
  Unsigned32 0..4096  

mscGsmBcV42bisMaximumStringSize 1.3.6.1.4.1.562.36.2.1.128.9.10.1.5
This attribute indicates the maximum number of characters allowed in a string represented by a codeword negotiated at link setup by the data link protocol by way of the Exchange Identification (XID) negotiation of parameter P2 (maximum string size). The value used for XID negotiations can be provisioned by component GsmIwfV42bisProv attribute maximumStringSize.
OBJECT-TYPE    
  Unsigned32 6..250  

mscGsmBcV42bisLastDecodeError 1.3.6.1.4.1.562.36.2.1.128.9.10.1.6
This attribute indicates last error found by the decoder. Error values are: none, No errors found. badStepup, Receipt of STEPUP (step up codeword size) codeword when it would cause C2 (current code word size) to exceed N1 (maximum code word size). codewordEqC1, Receipt of a codeword, at any time, equal to C1 (next empty dictionary entry). emptyCodeword, Receipt of a codeword representing an empty dictionary entry. reservedCommand, Receipt of a reserved command code. generalError, Receipt of any other error. The action taken by V.42bis on detecting an error is provisioned by component GsmIwfV42bis attribute actionOnError.
OBJECT-TYPE    
  INTEGER none(0), badStepup(1), codewordEqC1(2), emptyCodeword(3), reservedCommand(4), generalError(5)  

mscGsmBcV42bisCompRatioEncoder 1.3.6.1.4.1.562.36.2.1.128.9.10.1.7
This attribute indicates the number of uncompressed bytes divided by the number of compressed bytes. A value greater than one means that the data is being compressed. This is the compression ratio achieved by the V.42bis encoder running on the Passport. This attribute is relevant for both protocol modes transparent and compressed as the encoder switches between the two modes.
OBJECT-TYPE    
  FixedPoint2 0..30000  

mscGsmBcV42bisCompRatioDecoder 1.3.6.1.4.1.562.36.2.1.128.9.10.1.8
This attribute indicates the number of uncompressed bytes divided by the number of compressed bytes. A value greater than one means that the data is being compressed. This is the compression ratio achieved by the V.42bis encoder at the mobile or Public Switched Telephone Network (PSTN). This attribute is relevant for both protocol modes transparent and compressed as the encoder switches between the two modes.
OBJECT-TYPE    
  FixedPoint2 0..30000  

mscGsmBcV42bisStatsTable 1.3.6.1.4.1.562.36.2.1.128.9.11
This group contains operational attributes that measure the performance of V.42bis.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcV42bisStatsEntry

mscGsmBcV42bisStatsEntry 1.3.6.1.4.1.562.36.2.1.128.9.11.1
An entry in the mscGsmBcV42bisStatsTable.
OBJECT-TYPE    
  MscGsmBcV42bisStatsEntry  

mscGsmBcV42bisModeChangesEncode 1.3.6.1.4.1.562.36.2.1.128.9.11.1.1
This attribute counts the number of mode changes (from transparent to compressed or from compressed to transparent) by the encoder. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcV42bisModeChangesDecode 1.3.6.1.4.1.562.36.2.1.128.9.11.1.2
This attribute counts the number of mode changes (from transparent to compressed or from compressed to transparent) by the decoder. The mode changes are determined by the encoder at the mobile or the Public Switched Telephone Network (PSTN). The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcV42bisResetsEncode 1.3.6.1.4.1.562.36.2.1.128.9.11.1.3
This attribute counts the number of resets sent by the encoder. A reset is a command code sent by the encoder to force dictionary reinitialization. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcV42bisResetsDecode 1.3.6.1.4.1.562.36.2.1.128.9.11.1.4
This attribute counts the number of resets received by the decoder. A reset is a command code sent by the encoder to force dictionary reinitialization. The resets of the decoder are determined by the encoder at the mobile or Public Switched Telephone Network (PSTN). The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcV42bisReInitializations 1.3.6.1.4.1.562.36.2.1.128.9.11.1.5
This attribute counts the number of times V.42bis is reinitialized because of a destructive break (a destructive break is a break that causes data to be discarded) occurring on the error-corrected connection initiatated by either the mobile or Public Switched Telephone Network (PSTN). The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcV42bisErrorsInDecode 1.3.6.1.4.1.562.36.2.1.128.9.11.1.6
This attribute counts the number of errors found by the decoder. The errors could be any of the following: 1.Receipt of STEPUP (step up codeword size) codeword when it would cause C2 (current code word size) to exceed N1 (maximum code word size). 2. Receipt of a codeword, at any time, equal to C1 (next empty dictionary entry). 3. Receipt of a codeword representing an empty dictionary entry. 4. Receipt of a reserved command code. 5. Receipt of any other error. The counter wraps when it exceeds the maximum value. The action taken by V.42bis on detecting any of these errors is provisioned by component GsmIwfV42bis attribute actionOnError.
OBJECT-TYPE    
  Counter32  

mscGsmBcL2RCop 1.3.6.1.4.1.562.36.2.1.128.10
OBJECT IDENTIFIER    

mscGsmBcL2RCopRowStatusTable 1.3.6.1.4.1.562.36.2.1.128.10.1
This entry controls the addition and deletion of mscGsmBcL2RCop components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcL2RCopRowStatusEntry

mscGsmBcL2RCopRowStatusEntry 1.3.6.1.4.1.562.36.2.1.128.10.1.1
A single entry in the table represents a single mscGsmBcL2RCop component.
OBJECT-TYPE    
  MscGsmBcL2RCopRowStatusEntry  

mscGsmBcL2RCopRowStatus 1.3.6.1.4.1.562.36.2.1.128.10.1.1.1
This variable is used as the basis for SNMP naming of mscGsmBcL2RCop components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscGsmBcL2RCopComponentName 1.3.6.1.4.1.562.36.2.1.128.10.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscGsmBcL2RCopStorageType 1.3.6.1.4.1.562.36.2.1.128.10.1.1.4
This variable represents the storage type value for the mscGsmBcL2RCop tables.
OBJECT-TYPE    
  StorageType  

mscGsmBcL2RCopIndex 1.3.6.1.4.1.562.36.2.1.128.10.1.1.10
This variable represents the index for the mscGsmBcL2RCop tables.
OBJECT-TYPE    
  NonReplicated  

mscGsmBcL2RCopOperTable 1.3.6.1.4.1.562.36.2.1.128.10.10
This group contains operational attributes that measure the performance of L2RCop.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcL2RCopOperEntry

mscGsmBcL2RCopOperEntry 1.3.6.1.4.1.562.36.2.1.128.10.10.1
An entry in the mscGsmBcL2RCopOperTable.
OBJECT-TYPE    
  MscGsmBcL2RCopOperEntry  

mscGsmBcL2RCopFlowControlStateTx 1.3.6.1.4.1.562.36.2.1.128.10.10.1.1
This attribute indicates whether flow control is active in the transmit direction (towards the network side) for Layer2 Relay.
OBJECT-TYPE    
  INTEGER active(0), inactive(1)  

mscGsmBcL2RCopFlowControlStateRx 1.3.6.1.4.1.562.36.2.1.128.10.10.1.2
This attribute indicates whether flow control is active in the receive direction (towards the mobile) for Layer2 Relay.
OBJECT-TYPE    
  INTEGER active(0), inactive(1)  

mscGsmBcL2RCopStatsTable 1.3.6.1.4.1.562.36.2.1.128.10.11
This group contains operational attributes that measure the performance of L2RCop.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcL2RCopStatsEntry

mscGsmBcL2RCopStatsEntry 1.3.6.1.4.1.562.36.2.1.128.10.11.1
An entry in the mscGsmBcL2RCopStatsTable.
OBJECT-TYPE    
  MscGsmBcL2RCopStatsEntry  

mscGsmBcL2RCopBytesTx 1.3.6.1.4.1.562.36.2.1.128.10.11.1.1
This attribute counts the number of data bytes relayed by Layer2 Relay in the transmit direction (towards the network). The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcL2RCopBytesRx 1.3.6.1.4.1.562.36.2.1.128.10.11.1.2
This attribute counts the number of data bytes relayed by Layer2 Relay in the receive direction (towards the mobile). The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcL2RCopBreakCountRx 1.3.6.1.4.1.562.36.2.1.128.10.11.1.3
This attribute counts the number of breaks received from the mobile. A break received from the mobile results in the V.42bis function being reset and the break condition forwarded to the network. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcL2RCopBreakCountTx 1.3.6.1.4.1.562.36.2.1.128.10.11.1.4
This attribute counts the number of breaks transmitted to the mobile (a break was received from the network). A break received from the network results in the V.42bis function being reset and the break condition forwarded to the mobile. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcUpperRelay 1.3.6.1.4.1.562.36.2.1.128.11
OBJECT IDENTIFIER    

mscGsmBcUpperRelayRowStatusTable 1.3.6.1.4.1.562.36.2.1.128.11.1
This entry controls the addition and deletion of mscGsmBcUpperRelay components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcUpperRelayRowStatusEntry

mscGsmBcUpperRelayRowStatusEntry 1.3.6.1.4.1.562.36.2.1.128.11.1.1
A single entry in the table represents a single mscGsmBcUpperRelay component.
OBJECT-TYPE    
  MscGsmBcUpperRelayRowStatusEntry  

mscGsmBcUpperRelayRowStatus 1.3.6.1.4.1.562.36.2.1.128.11.1.1.1
This variable is used as the basis for SNMP naming of mscGsmBcUpperRelay components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscGsmBcUpperRelayComponentName 1.3.6.1.4.1.562.36.2.1.128.11.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscGsmBcUpperRelayStorageType 1.3.6.1.4.1.562.36.2.1.128.11.1.1.4
This variable represents the storage type value for the mscGsmBcUpperRelay tables.
OBJECT-TYPE    
  StorageType  

mscGsmBcUpperRelayIndex 1.3.6.1.4.1.562.36.2.1.128.11.1.1.10
This variable represents the index for the mscGsmBcUpperRelay tables.
OBJECT-TYPE    
  NonReplicated  

mscGsmBcUpperRelayOperTable 1.3.6.1.4.1.562.36.2.1.128.11.10
This group contains operational attributes that measure the performance of the UpperRelay.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcUpperRelayOperEntry

mscGsmBcUpperRelayOperEntry 1.3.6.1.4.1.562.36.2.1.128.11.10.1
An entry in the mscGsmBcUpperRelayOperTable.
OBJECT-TYPE    
  MscGsmBcUpperRelayOperEntry  

mscGsmBcUpperRelayBufferSize 1.3.6.1.4.1.562.36.2.1.128.11.10.1.1
This attribute indicates the size of the transmit and receive flow control buffers.
OBJECT-TYPE    
  Unsigned32 0..65535  

mscGsmBcUpperRelayFlowControlStateTx 1.3.6.1.4.1.562.36.2.1.128.11.10.1.2
This attribute indicates whether the transmit flow control is active or not.
OBJECT-TYPE    
  INTEGER active(0), inactive(1)  

mscGsmBcUpperRelayFlowControlStateRx 1.3.6.1.4.1.562.36.2.1.128.11.10.1.3
This attribute indicates whether the receive flow control is active or not.
OBJECT-TYPE    
  INTEGER active(0), inactive(1)  

mscGsmBcUpperRelayStatsTable 1.3.6.1.4.1.562.36.2.1.128.11.11
This group contains operational attributes that measure the performance of the UpperRelay.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcUpperRelayStatsEntry

mscGsmBcUpperRelayStatsEntry 1.3.6.1.4.1.562.36.2.1.128.11.11.1
An entry in the mscGsmBcUpperRelayStatsTable.
OBJECT-TYPE    
  MscGsmBcUpperRelayStatsEntry  

mscGsmBcUpperRelayFramesTx 1.3.6.1.4.1.562.36.2.1.128.11.11.1.1
This attribute counts the number of frames that are sent in the transmit direction. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcUpperRelayFramesRx 1.3.6.1.4.1.562.36.2.1.128.11.11.1.2
This attribute counts the number of frames that are sent in the receive direction. The counter wraps when it exceeds the maximum value.
OBJECT-TYPE    
  Counter32  

mscGsmBcUpperRelayUnacknowledgedFrames 1.3.6.1.4.1.562.36.2.1.128.11.11.1.3
This attribute indicates the number of current frames sent that have not been acknowledged.
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscGsmBcOperTable 1.3.6.1.4.1.562.36.2.1.128.101
This group contains operational attributes concerning the operation of this particular GsmIwfBearerChannel for the current or most recent call.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcOperEntry

mscGsmBcOperEntry 1.3.6.1.4.1.562.36.2.1.128.101.1
An entry in the mscGsmBcOperTable.
OBJECT-TYPE    
  MscGsmBcOperEntry  

mscGsmBcMipState 1.3.6.1.4.1.562.36.2.1.128.101.1.1
This attribute indicates the current state of the MSC/IWF Interface Protocol (MIP) for an IWF element. Valid values are: idle, Startup state of IWF element. pendingSetup, Pending initial state of IWF element. setup, Initial state of IWF element. pendingActivation, Synchronization has been requested, but the IWF element is not yet in the Synchronization state. activated, Synchronization state. holdDisconnect, Flush buffer state, during call clearing the MSC is responsible for holding the network connection towards the disconnected party while the IWF completes the data transmission (flushing any buffered data towards the disconnected party; any buffered data towards the disconnecting party is discarded.) currentlySuspended, The call is temporarily switched to speech phase during a dual services call.
OBJECT-TYPE    
  INTEGER idle(0), pendingSetup(1), setup(2), pendingActivation(3), activated(4), holdDisconnect(5), suspended(6)  

mscGsmBcMaxUserDataRate 1.3.6.1.4.1.562.36.2.1.128.101.1.2
This attribute indicates the user rate which is in affect between the IWF and the fixed network. A user rate of 1200_75 is 75 bit/s in the receive direction 1200 bit/s in the transmit direction.
OBJECT-TYPE    
  INTEGER n300(0), n600(1), n1200(2), n120075(3), n2400(4), n4800(5), n7200(6), n9600(7), n12000(8), n14400(9), n16800(10), n19200(11), n21600(12), n24000(13), n26400(14), n28800(15), n31200(16), n32000(17), n33600(18), n38400(19), n43200(20), n48000(21), n56000(22), n57600(23), n64000(24), none(25)  

mscGsmBcConnectionType 1.3.6.1.4.1.562.36.2.1.128.101.1.3
This attribute indicates the connection types between the terminal equipment or terminal adaptor and mobile and between the IWF and the network. Valid connection types are: asynchronous, Transmission of data which does not require clocking of the data signal. synchronous, Transmission of data which requires clocking of the data signal.
OBJECT-TYPE    
  INTEGER synchronous(0), asynchronous(1)  

mscGsmBcDataBits 1.3.6.1.4.1.562.36.2.1.128.101.1.4
This attribute indicates the number of data bits encoded between start and stop bits in an asynchronous data call connection data stream. This attribute is set to notApplicable for a synchronous data call.
OBJECT-TYPE    
  INTEGER n7(0), n8(1), notApplicable(99)  

mscGsmBcStopBits 1.3.6.1.4.1.562.36.2.1.128.101.1.5
This attribute indicates the number of stop bits (a mark (binary 1) placed at the end of each data byte) inserted between the data bits in an asynchronous data call connection data stream, this marks the end of the character. This attribute is set to notApplicable for a synchronous data call.
OBJECT-TYPE    
  INTEGER n1(0), n2(1), notApplicable(99)  

mscGsmBcParity 1.3.6.1.4.1.562.36.2.1.128.101.1.6
This attribute indicates the type of parity for the data bits in an asynchronous data call connection data stream. Parity is a redundant bit that is added to each data byte to aid in error detection. If odd parity is used, all data bytes have an odd number of 1s, and if even parity is used, all data bytes have an even number of 1s. Also parity may be forced to 0, forced to 1, or may not be used at all (required for sending 8-bit data). This attribute will be set to notApplicable for a synchronouse data call. Valid values are: none, No parity. odd, Odd parity. even, Even parity. forced0, Parity forced to 0. forced1, Parity forced to 1. notApplicable, Parity not applicable.
OBJECT-TYPE    
  INTEGER none(0), odd(1), even(2), forced0(3), forced1(4), notApplicable(99)  

mscGsmBcFlowControl 1.3.6.1.4.1.562.36.2.1.128.101.1.7
This attribute indicates the current flow control status of this GsmIwfBearerChannel for an asynchronous call. For a synchronous data call this attribute will be set to noFlowControlActive. Valid values are: noFlowControlActive, There is no flow control active over the air interface and network interfaces. The applications at the end points handle flow control. inband, Embedded characters in the data stream indicate flow control. v110FlowCtnrl, Utilization of V.110 flow control. errorCntrl, Flow control is handle by datalink protocols.
OBJECT-TYPE    
  INTEGER noFlowControlActive(0), inband(1), v110FlowCntrl(2), errorCntrl(3)  

mscGsmBcCallType 1.3.6.1.4.1.562.36.2.1.128.101.1.8
This attribute indicates the current call type. Valid values are: faxG3, group 3 fax calls cda31khz, asynchronous 3.1kHz modem cdaUdi, asynchronous unrestricted digital data call cdsUdi, synchronous unrestricted digital data call cds31khz, synchronous 3.1kHz modem
OBJECT-TYPE    
  INTEGER faxG3(0), cda31khz(1), cdaUdi(2), cdsUdi(3), cds31khz(4)  

mscGsmBcLastResponseCode 1.3.6.1.4.1.562.36.2.1.128.101.1.9
This attribute indicates the MSC/IWF Interface Protocol (MIP) response code returned for the last call which was active on this particular GsmIwfBearerChannel. Valid values are: requestDone, the call was terminated normally. systemError, the call was terminated due to a base system problem. applicationError, the call was terminated due to an application level problem. noResources, the call was terminated due to a lack of available resources. msgSizeMismatch, Message length does not match length defined by the MSC/IWF Interface Protocol for the particular message type. protocolViolation, Failed to perform the request because the coding of the request message was invalid; message was not understood. requestNotSupported, Message was understood but not supported by the IWF or MSC. requestDenied, Message was understood and supported by the IWF or MSC but the request is denied. invalidMessage, Message received is invalid for the current state of the IWF's state machine or the MSC data call state machine. The message is ignored. bufferNotFlushed, Message from the Iwf to the MSC indicating that the buffers are not flushed as requested by the MSC. notApplicable, this attribute is not applicable for this call. This is the default value for this attribute.
OBJECT-TYPE    
  INTEGER requestDone(0), systemError(1), applicationError(2), noResources(3), msgSizeMismatch(4), protocolViolation(5), requestNotSupported(6), requestDenied(7), invalidMessage(8), bufferNotFlushed(9), notApplicable(99)  

mscGsmBcMateBearerChannel 1.3.6.1.4.1.562.36.2.1.128.101.1.10
This attribute contains the name of the mate GsmIwfBearerChannel that this GsmIwfBearerChannel is involved with in the currently active call.
OBJECT-TYPE    
  RowPointer  

mscGsmBcCidDataTable 1.3.6.1.4.1.562.36.2.1.128.104
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcCidDataEntry

mscGsmBcCidDataEntry 1.3.6.1.4.1.562.36.2.1.128.104.1
An entry in the mscGsmBcCidDataTable.
OBJECT-TYPE    
  MscGsmBcCidDataEntry  

mscGsmBcCustomerIdentifier 1.3.6.1.4.1.562.36.2.1.128.104.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

mscGsmBcStateTable 1.3.6.1.4.1.562.36.2.1.128.105
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscGsmBcStateEntry

mscGsmBcStateEntry 1.3.6.1.4.1.562.36.2.1.128.105.1
An entry in the mscGsmBcStateTable.
OBJECT-TYPE    
  MscGsmBcStateEntry  

mscGsmBcAdminState 1.3.6.1.4.1.562.36.2.1.128.105.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscGsmBcOperationalState 1.3.6.1.4.1.562.36.2.1.128.105.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscGsmBcUsageState 1.3.6.1.4.1.562.36.2.1.128.105.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

gsmIwfMIB 1.3.6.1.4.1.562.36.2.2.129
OBJECT IDENTIFIER    

gsmIwfGroup 1.3.6.1.4.1.562.36.2.2.129.1
OBJECT IDENTIFIER    

gsmIwfGroupCA 1.3.6.1.4.1.562.36.2.2.129.1.1
OBJECT IDENTIFIER    

gsmIwfGroupCA02 1.3.6.1.4.1.562.36.2.2.129.1.1.3
OBJECT IDENTIFIER    

gsmIwfGroupCA02A 1.3.6.1.4.1.562.36.2.2.129.1.1.3.2
OBJECT IDENTIFIER    

gsmIwfCapabilities 1.3.6.1.4.1.562.36.2.2.129.3
OBJECT IDENTIFIER    

gsmIwfCapabilitiesCA 1.3.6.1.4.1.562.36.2.2.129.3.1
OBJECT IDENTIFIER    

gsmIwfCapabilitiesCA02 1.3.6.1.4.1.562.36.2.2.129.3.1.3
OBJECT IDENTIFIER    

gsmIwfCapabilitiesCA02A 1.3.6.1.4.1.562.36.2.2.129.3.1.3.2
OBJECT IDENTIFIER    

Defined Objects

MscGsmCsRowStatusEntry  
SEQUENCE    
  RowStatus as mscGsmCsRowStatus  
  DisplayString as mscGsmCsComponentName  
  StorageType as mscGsmCsStorageType  
  Integer32 as mscGsmCsTrunkGrpIndex  

MscGsmCsProvEntry  
SEQUENCE    
  AsciiString as mscGsmCsCommentText  
  IpAddress as mscGsmCsMscIpAddress  
  RowPointer as mscGsmCsVirtualRouterName  
  INTEGER as mscGsmCsVoiceLaw  

MscGsmCsCidDataEntry  
SEQUENCE    
  Unsigned32 as mscGsmCsCustomerIdentifier  

MscGsmCsStateEntry  
SEQUENCE    
  INTEGER as mscGsmCsAdminState  
  INTEGER as mscGsmCsOperationalState  
  INTEGER as mscGsmCsUsageState  

MscGsmCsStatsEntry  
SEQUENCE    
  Gauge32 as mscGsmCsCurrentCalls  
  Counter32 as mscGsmCsCallsRequested  
  Counter32 as mscGsmCsCallsSetup  
  Counter32 as mscGsmCsCallsActivated  
  Counter32 as mscGsmCsCallsReleasedNormal  
  Counter32 as mscGsmCsCallsReleasedAbnormal  
  Counter32 as mscGsmCsChannelConfigChanges  
  Counter32 as mscGsmCsChannelModeModifyRequests  
  Counter32 as mscGsmCsStatusMessagesRx  
  Counter32 as mscGsmCsErroredMipFrames  

MscGsmCsModemRowStatusEntry  
SEQUENCE    
  RowStatus as mscGsmCsModemRowStatus  
  DisplayString as mscGsmCsModemComponentName  
  StorageType as mscGsmCsModemStorageType  
  INTEGER as mscGsmCsModemIndex  

MscGsmCsRlpRowStatusEntry  
SEQUENCE    
  RowStatus as mscGsmCsRlpRowStatus  
  DisplayString as mscGsmCsRlpComponentName  
  StorageType as mscGsmCsRlpStorageType  
  INTEGER as mscGsmCsRlpIndex  

MscGsmCsRlpProvEntry  
SEQUENCE    
  Unsigned32 as mscGsmCsRlpHighestVersion  
  Unsigned32 as mscGsmCsRlpIwfToMsWindowSize  
  Unsigned32 as mscGsmCsRlpMsToIwfWindowSize  
  Unsigned32 as mscGsmCsRlpT1AckTimer  
  Unsigned32 as mscGsmCsRlpT2AckDelayTimer  
  Unsigned32 as mscGsmCsRlpN2RetransmitCount  

MscGsmCsFaxRowStatusEntry  
SEQUENCE    
  RowStatus as mscGsmCsFaxRowStatus  
  DisplayString as mscGsmCsFaxComponentName  
  StorageType as mscGsmCsFaxStorageType  
  NonReplicated as mscGsmCsFaxIndex  

MscGsmCsFaxProvEntry  
SEQUENCE    
  FixedPoint2 as mscGsmCsFaxT1CalledToneTimer  

MscGsmCsV42RowStatusEntry  
SEQUENCE    
  RowStatus as mscGsmCsV42RowStatus  
  DisplayString as mscGsmCsV42ComponentName  
  StorageType as mscGsmCsV42StorageType  
  NonReplicated as mscGsmCsV42Index  

MscGsmCsV42ProvEntry  
SEQUENCE    
  FixedPoint2 as mscGsmCsV42T400DetectTimer  
  FixedPoint2 as mscGsmCsV42T401AckTimer  
  FixedPoint2 as mscGsmCsV42T402AckDelayTimer  
  Unsigned32 as mscGsmCsV42T403IdleProbeTimer  
  Unsigned32 as mscGsmCsV42TxN401FrameSize  
  Unsigned32 as mscGsmCsV42RxN401FrameSize  
  Unsigned32 as mscGsmCsV42TxKwindowSize  
  Unsigned32 as mscGsmCsV42RxKwindowSize  
  Unsigned32 as mscGsmCsV42N400RetransLimit  

MscGsmCsV42bisRowStatusEntry  
SEQUENCE    
  RowStatus as mscGsmCsV42bisRowStatus  
  DisplayString as mscGsmCsV42bisComponentName  
  StorageType as mscGsmCsV42bisStorageType  
  NonReplicated as mscGsmCsV42bisIndex  

MscGsmCsV42bisProvEntry  
SEQUENCE    
  INTEGER as mscGsmCsV42bisCompressionDirection  
  Unsigned32 as mscGsmCsV42bisMaximumCodewords  
  Unsigned32 as mscGsmCsV42bisMaximumStringSize  
  INTEGER as mscGsmCsV42bisActionOnError  

MscGsmCsLpRowStatusEntry  
SEQUENCE    
  RowStatus as mscGsmCsLpRowStatus  
  DisplayString as mscGsmCsLpComponentName  
  StorageType as mscGsmCsLpStorageType  
  Integer32 as mscGsmCsLpIndex  

MscGsmCsLpOperEntry  
SEQUENCE    
  Unsigned32 as mscGsmCsLpConfiguredBearerChannels  
  Gauge32 as mscGsmCsLpActiveCalls  
  Unsigned32 as mscGsmCsLpAssignedCapacity  
  INTEGER as mscGsmCsLpModemsSupported  

MscGsmBcRowStatusEntry  
SEQUENCE    
  RowStatus as mscGsmBcRowStatus  
  DisplayString as mscGsmBcComponentName  
  StorageType as mscGsmBcStorageType  
  Integer32 as mscGsmBcTrunkGrpIndex  
  Integer32 as mscGsmBcCicIndex  

MscGsmBcOperEntry  
SEQUENCE    
  INTEGER as mscGsmBcMipState  
  INTEGER as mscGsmBcMaxUserDataRate  
  INTEGER as mscGsmBcConnectionType  
  INTEGER as mscGsmBcDataBits  
  INTEGER as mscGsmBcStopBits  
  INTEGER as mscGsmBcParity  
  INTEGER as mscGsmBcFlowControl  
  INTEGER as mscGsmBcCallType  
  INTEGER as mscGsmBcLastResponseCode  
  RowPointer as mscGsmBcMateBearerChannel  

MscGsmBcCidDataEntry  
SEQUENCE    
  Unsigned32 as mscGsmBcCustomerIdentifier  

MscGsmBcStateEntry  
SEQUENCE    
  INTEGER as mscGsmBcAdminState  
  INTEGER as mscGsmBcOperationalState  
  INTEGER as mscGsmBcUsageState  

MscGsmBcFramerRowStatusEntry  
SEQUENCE    
  RowStatus as mscGsmBcFramerRowStatus  
  DisplayString as mscGsmBcFramerComponentName  
  StorageType as mscGsmBcFramerStorageType  
  NonReplicated as mscGsmBcFramerIndex  

MscGsmBcFramerProvEntry  
SEQUENCE    
  Link as mscGsmBcFramerInterfaceName  

MscGsmBcFramerStatsEntry  
SEQUENCE    
  Counter32 as mscGsmBcFramerFrmToIf  
  Counter32 as mscGsmBcFramerFrmFromIf  
  Counter32 as mscGsmBcFramerOctetFromIf  
  Counter32 as mscGsmBcFramerCrcErrors  
  Counter32 as mscGsmBcFramerLrcErrors  
  Counter32 as mscGsmBcFramerNonOctetErrors  
  Counter32 as mscGsmBcFramerOverruns  
  Counter32 as mscGsmBcFramerUnderruns  

MscGsmBcFramerLinkEntry  
SEQUENCE    
  INTEGER as mscGsmBcFramerFramingType  

MscGsmBcFramerStateEntry  
SEQUENCE    
  INTEGER as mscGsmBcFramerAdminState  
  INTEGER as mscGsmBcFramerOperationalState  
  INTEGER as mscGsmBcFramerUsageState  

MscGsmBcLayer1RowStatusEntry  
SEQUENCE    
  RowStatus as mscGsmBcLayer1RowStatus  
  DisplayString as mscGsmBcLayer1ComponentName  
  StorageType as mscGsmBcLayer1StorageType  
  NonReplicated as mscGsmBcLayer1Index  

MscGsmBcLayer1OperEntry  
SEQUENCE    
  INTEGER as mscGsmBcLayer1ActiveMode  
  INTEGER as mscGsmBcLayer1Connection  
  Unsigned32 as mscGsmBcLayer1DataRate  
  Unsigned32 as mscGsmBcLayer1IntermediateRate  

MscGsmBcLayer1StatsEntry  
SEQUENCE    
  Counter32 as mscGsmBcLayer1FramesTx  
  Counter32 as mscGsmBcLayer1FramesRx  
  Counter32 as mscGsmBcLayer1BytesTx  
  Counter32 as mscGsmBcLayer1BytesRx  
  Counter32 as mscGsmBcLayer1UnderRunsTx  
  Counter32 as mscGsmBcLayer1OverRunsRx  
  Counter32 as mscGsmBcLayer1NonOctetErrorsRx  
  Counter32 as mscGsmBcLayer1LargeFrameErrorsRx  
  Counter32 as mscGsmBcLayer1FramesDiscarded  
  Counter32 as mscGsmBcLayer1LrcErrorsTx  

MscGsmBcModemRowStatusEntry  
SEQUENCE    
  RowStatus as mscGsmBcModemRowStatus  
  DisplayString as mscGsmBcModemComponentName  
  StorageType as mscGsmBcModemStorageType  
  NonReplicated as mscGsmBcModemIndex  

MscGsmBcModemOperEntry  
SEQUENCE    
  INTEGER as mscGsmBcModemRate  
  OCTET STRING as mscGsmBcModemAlgorithmInUse  
  INTEGER as mscGsmBcModemProtocolState  
  INTEGER as mscGsmBcModemReceiverTransmitter  
  INTEGER as mscGsmBcModemTraining  
  INTEGER as mscGsmBcModemToUpperFlowControlActive  
  INTEGER as mscGsmBcModemToDspFlowControlActive  
  INTEGER as mscGsmBcModemAsyncMode  
  INTEGER as mscGsmBcModemAutoHdlcMode  
  INTEGER as mscGsmBcModemOutbandFlowControl  
  INTEGER as mscGsmBcModemOutbandBreak  
  INTEGER as mscGsmBcModemAutobaud  

MscGsmBcModemStatsEntry  
SEQUENCE    
  Counter32 as mscGsmBcModemBytesTx  
  Counter32 as mscGsmBcModemBytesRx  
  Counter32 as mscGsmBcModemFramingErrors  

MscGsmBcV110RowStatusEntry  
SEQUENCE    
  RowStatus as mscGsmBcV110RowStatus  
  DisplayString as mscGsmBcV110ComponentName  
  StorageType as mscGsmBcV110StorageType  
  NonReplicated as mscGsmBcV110Index  

MscGsmBcV110OperEntry  
SEQUENCE    
  Unsigned32 as mscGsmBcV110DataRate  
  INTEGER as mscGsmBcV110IntermediateRate  

MscGsmBcV110StatsEntry  
SEQUENCE    
  Counter32 as mscGsmBcV110FramesTx  
  Counter32 as mscGsmBcV110FramesRx  
  Counter32 as mscGsmBcV110BytesTx  
  Counter32 as mscGsmBcV110BytesRx  
  Counter32 as mscGsmBcV110UnderRunsTx  
  Counter32 as mscGsmBcV110OverRunsRx  
  Counter32 as mscGsmBcV110NonOctetErrorsRx  
  Counter32 as mscGsmBcV110LargeFrameErrorsRx  
  Counter32 as mscGsmBcV110FramesDiscarded  
  Counter32 as mscGsmBcV110LrcErrorsTx  

MscGsmBcFaxRowStatusEntry  
SEQUENCE    
  RowStatus as mscGsmBcFaxRowStatus  
  DisplayString as mscGsmBcFaxComponentName  
  StorageType as mscGsmBcFaxStorageType  
  NonReplicated as mscGsmBcFaxIndex  

MscGsmBcFaxOperEntry  
SEQUENCE    
  INTEGER as mscGsmBcFaxActiveMode  
  INTEGER as mscGsmBcFaxProtocolState  
  Unsigned32 as mscGsmBcFaxMessageRate  

MscGsmBcFaxStatsEntry  
SEQUENCE    
  Counter32 as mscGsmBcFaxMessageFramesRx  
  Counter32 as mscGsmBcFaxMessageFramesTx  
  Counter32 as mscGsmBcFaxBcsFramesRx  
  Counter32 as mscGsmBcFaxBcsFramesTx  
  Counter32 as mscGsmBcFaxPagesRxFromMobile  
  Counter32 as mscGsmBcFaxPagesTxToMobile  
  Counter32 as mscGsmBcFaxChannelModeModify  
  Counter32 as mscGsmBcFaxBcsFrameErrors  

MscGsmBcRlpRowStatusEntry  
SEQUENCE    
  RowStatus as mscGsmBcRlpRowStatus  
  DisplayString as mscGsmBcRlpComponentName  
  StorageType as mscGsmBcRlpStorageType  
  NonReplicated as mscGsmBcRlpIndex  

MscGsmBcRlpOperEntry  
SEQUENCE    
  INTEGER as mscGsmBcRlpProtocolState  
  Unsigned32 as mscGsmBcRlpFrameSize  
  Unsigned32 as mscGsmBcRlpHighestVersion  
  Unsigned32 as mscGsmBcRlpIwfToMsWindowSize  
  Unsigned32 as mscGsmBcRlpMsToIwfWindowSize  
  Unsigned32 as mscGsmBcRlpT1AckTimer  
  Unsigned32 as mscGsmBcRlpT2AckDelayTimer  
  Unsigned32 as mscGsmBcRlpN2RetransmitCount  

MscGsmBcRlpStatsEntry  
SEQUENCE    
  Counter32 as mscGsmBcRlpIFramesTx  
  Counter32 as mscGsmBcRlpIFramesRx  
  Counter32 as mscGsmBcRlpFramesRetransmitted  
  Counter32 as mscGsmBcRlpT1AckTimeouts  
  Counter32 as mscGsmBcRlpInvalidFrames  
  Counter32 as mscGsmBcRlpCrcErrorsRx  
  Counter32 as mscGsmBcRlpOutOfSequenceFrames  
  Counter32 as mscGsmBcRlpRemoteBusyIndications  
  Counter32 as mscGsmBcRlpLocalBusyIndications  
  Counter32 as mscGsmBcRlpIFramesTxDiscarded  
  Counter32 as mscGsmBcRlpResetsRx  

MscGsmBcV42RowStatusEntry  
SEQUENCE    
  RowStatus as mscGsmBcV42RowStatus  
  DisplayString as mscGsmBcV42ComponentName  
  StorageType as mscGsmBcV42StorageType  
  NonReplicated as mscGsmBcV42Index  

MscGsmBcV42OperEntry  
SEQUENCE    
  INTEGER as mscGsmBcV42ProtocolState  
  Unsigned32 as mscGsmBcV42TxN401FrameSize  
  Unsigned32 as mscGsmBcV42RxN401FrameSize  
  Unsigned32 as mscGsmBcV42TxKwindowSize  
  Unsigned32 as mscGsmBcV42RxKwindowSize  

MscGsmBcV42StatsEntry  
SEQUENCE    
  Counter32 as mscGsmBcV42IBytesRx  
  Counter32 as mscGsmBcV42IBytesTx  
  Counter32 as mscGsmBcV42IFramesRx  
  Counter32 as mscGsmBcV42IFramesTx  
  Counter32 as mscGsmBcV42FramesRetransmitted  
  Counter32 as mscGsmBcV42T1AckTimeouts  
  Counter32 as mscGsmBcV42RemoteBusyIndications  
  Counter32 as mscGsmBcV42LocalBusyIndications  
  Counter32 as mscGsmBcV42BadFramesRx  
  Counter32 as mscGsmBcV42CrcErrorsRx  

MscGsmBcV42bisRowStatusEntry  
SEQUENCE    
  RowStatus as mscGsmBcV42bisRowStatus  
  DisplayString as mscGsmBcV42bisComponentName  
  StorageType as mscGsmBcV42bisStorageType  
  NonReplicated as mscGsmBcV42bisIndex  

MscGsmBcV42bisOperEntry  
SEQUENCE    
  INTEGER as mscGsmBcV42bisProtocolModeEncoder  
  INTEGER as mscGsmBcV42bisProtocolModeDecoder  
  INTEGER as mscGsmBcV42bisCompressionDirection  
  Unsigned32 as mscGsmBcV42bisMaximumCodewords  
  Unsigned32 as mscGsmBcV42bisMaximumStringSize  
  INTEGER as mscGsmBcV42bisLastDecodeError  
  FixedPoint2 as mscGsmBcV42bisCompRatioEncoder  
  FixedPoint2 as mscGsmBcV42bisCompRatioDecoder  

MscGsmBcV42bisStatsEntry  
SEQUENCE    
  Counter32 as mscGsmBcV42bisModeChangesEncode  
  Counter32 as mscGsmBcV42bisModeChangesDecode  
  Counter32 as mscGsmBcV42bisResetsEncode  
  Counter32 as mscGsmBcV42bisResetsDecode  
  Counter32 as mscGsmBcV42bisReInitializations  
  Counter32 as mscGsmBcV42bisErrorsInDecode  

MscGsmBcL2RCopRowStatusEntry  
SEQUENCE    
  RowStatus as mscGsmBcL2RCopRowStatus  
  DisplayString as mscGsmBcL2RCopComponentName  
  StorageType as mscGsmBcL2RCopStorageType  
  NonReplicated as mscGsmBcL2RCopIndex  

MscGsmBcL2RCopOperEntry  
SEQUENCE    
  INTEGER as mscGsmBcL2RCopFlowControlStateTx  
  INTEGER as mscGsmBcL2RCopFlowControlStateRx  

MscGsmBcL2RCopStatsEntry  
SEQUENCE    
  Counter32 as mscGsmBcL2RCopBytesTx  
  Counter32 as mscGsmBcL2RCopBytesRx  
  Counter32 as mscGsmBcL2RCopBreakCountRx  
  Counter32 as mscGsmBcL2RCopBreakCountTx  

MscGsmBcUpperRelayRowStatusEntry  
SEQUENCE    
  RowStatus as mscGsmBcUpperRelayRowStatus  
  DisplayString as mscGsmBcUpperRelayComponentName  
  StorageType as mscGsmBcUpperRelayStorageType  
  NonReplicated as mscGsmBcUpperRelayIndex  

MscGsmBcUpperRelayOperEntry  
SEQUENCE    
  Unsigned32 as mscGsmBcUpperRelayBufferSize  
  INTEGER as mscGsmBcUpperRelayFlowControlStateTx  
  INTEGER as mscGsmBcUpperRelayFlowControlStateRx  

MscGsmBcUpperRelayStatsEntry  
SEQUENCE    
  Counter32 as mscGsmBcUpperRelayFramesTx  
  Counter32 as mscGsmBcUpperRelayFramesRx  
  Gauge32 as mscGsmBcUpperRelayUnacknowledgedFrames