Nortel-MsCarrier-MscPassport-LogicalProcessorMIB

File: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB.mib (1177967 bytes)

Imported modules

RFC-1212 Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB
Nortel-MsCarrier-MscPassport-TextualConventionsMIB

Imported symbols

OBJECT-TYPE mscPassportMIBs mscComponents
Counter32 RowPointer DisplayString
StorageType RowStatus InterfaceIndex
Gauge32 Integer32 Unsigned32
AsciiString Hex NonReplicated
EnterpriseDateAndTime PassportCounter64 Link

Defined Objects

mscLp 1.3.6.1.4.1.562.36.2.1.12
OBJECT IDENTIFIER    

mscLpRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.1
This entry controls the addition and deletion of mscLp components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpRowStatusEntry

mscLpRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.1.1
A single entry in the table represents a single mscLp component.
OBJECT-TYPE    
  MscLpRowStatusEntry  

mscLpRowStatus 1.3.6.1.4.1.562.36.2.1.12.1.1.1
This variable is used as the basis for SNMP naming of mscLp components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscLpComponentName 1.3.6.1.4.1.562.36.2.1.12.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpStorageType 1.3.6.1.4.1.562.36.2.1.12.1.1.4
This variable represents the storage type value for the mscLp tables.
OBJECT-TYPE    
  StorageType  

mscLpIndex 1.3.6.1.4.1.562.36.2.1.12.1.1.10
This variable represents the index for the mscLp tables.
OBJECT-TYPE    
  Integer32 0..15  

mscLpDS3 1.3.6.1.4.1.562.36.2.1.12.5
OBJECT IDENTIFIER    

mscLpDS3RowStatusTable 1.3.6.1.4.1.562.36.2.1.12.5.1
This entry controls the addition and deletion of mscLpDS3 components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3RowStatusEntry

mscLpDS3RowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.5.1.1
A single entry in the table represents a single mscLpDS3 component.
OBJECT-TYPE    
  MscLpDS3RowStatusEntry  

mscLpDS3RowStatus 1.3.6.1.4.1.562.36.2.1.12.5.1.1.1
This variable is used as the basis for SNMP naming of mscLpDS3 components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscLpDS3ComponentName 1.3.6.1.4.1.562.36.2.1.12.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpDS3StorageType 1.3.6.1.4.1.562.36.2.1.12.5.1.1.4
This variable represents the storage type value for the mscLpDS3 tables.
OBJECT-TYPE    
  StorageType  

mscLpDS3Index 1.3.6.1.4.1.562.36.2.1.12.5.1.1.10
This variable represents the index for the mscLpDS3 tables.
OBJECT-TYPE    
  Integer32 0..11  

mscLpDS3Test 1.3.6.1.4.1.562.36.2.1.12.5.2
OBJECT IDENTIFIER    

mscLpDS3TestRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.5.2.1
This entry controls the addition and deletion of mscLpDS3Test components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3TestRowStatusEntry

mscLpDS3TestRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.5.2.1.1
A single entry in the table represents a single mscLpDS3Test component.
OBJECT-TYPE    
  MscLpDS3TestRowStatusEntry  

mscLpDS3TestRowStatus 1.3.6.1.4.1.562.36.2.1.12.5.2.1.1.1
This variable is used as the basis for SNMP naming of mscLpDS3Test components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscLpDS3TestComponentName 1.3.6.1.4.1.562.36.2.1.12.5.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpDS3TestStorageType 1.3.6.1.4.1.562.36.2.1.12.5.2.1.1.4
This variable represents the storage type value for the mscLpDS3Test tables.
OBJECT-TYPE    
  StorageType  

mscLpDS3TestIndex 1.3.6.1.4.1.562.36.2.1.12.5.2.1.1.10
This variable represents the index for the mscLpDS3Test tables.
OBJECT-TYPE    
  NonReplicated  

mscLpDS3TestStateTable 1.3.6.1.4.1.562.36.2.1.12.5.2.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3TestStateEntry

mscLpDS3TestStateEntry 1.3.6.1.4.1.562.36.2.1.12.5.2.10.1
An entry in the mscLpDS3TestStateTable.
OBJECT-TYPE    
  MscLpDS3TestStateEntry  

mscLpDS3TestAdminState 1.3.6.1.4.1.562.36.2.1.12.5.2.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscLpDS3TestOperationalState 1.3.6.1.4.1.562.36.2.1.12.5.2.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpDS3TestUsageState 1.3.6.1.4.1.562.36.2.1.12.5.2.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscLpDS3TestSetupTable 1.3.6.1.4.1.562.36.2.1.12.5.2.11
This group contains all of the operational data for a Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3TestSetupEntry

mscLpDS3TestSetupEntry 1.3.6.1.4.1.562.36.2.1.12.5.2.11.1
An entry in the mscLpDS3TestSetupTable.
OBJECT-TYPE    
  MscLpDS3TestSetupEntry  

mscLpDS3TestPurpose 1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.1
This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
OBJECT-TYPE    
  AsciiString SIZE(0..40)  

mscLpDS3TestType 1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.2
This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
OBJECT-TYPE    
  INTEGER card(0), manual(1), localLoop(2), remoteLoop(3), externalLoop(4), payloadLoop(5), remoteLoopThisTrib(6), v54RemoteLoop(7), pn127RemoteLoop(8)  

mscLpDS3TestFrmSize 1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.3
This attribute defines the size of the test data frames in number of bytes.
OBJECT-TYPE    
  Unsigned32 4..4096  

mscLpDS3TestFrmPatternType 1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.4
This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
OBJECT-TYPE    
  INTEGER ccitt32kBitPattern(0), ccitt8MBitPattern(1), customizedPattern(2)  

mscLpDS3TestCustomizedPattern 1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.5
This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
OBJECT-TYPE    
  Hex 0..4294967295  

mscLpDS3TestDataStartDelay 1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.6
This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
OBJECT-TYPE    
  Unsigned32 0..1814400  

mscLpDS3TestDisplayInterval 1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.7
This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
OBJECT-TYPE    
  Unsigned32 0..30240  

mscLpDS3TestDuration 1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.8
This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
OBJECT-TYPE    
  Unsigned32 1..30240  

mscLpDS3TestResultsTable 1.3.6.1.4.1.562.36.2.1.12.5.2.12
This group contains all the statistics related attributes of the Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3TestResultsEntry

mscLpDS3TestResultsEntry 1.3.6.1.4.1.562.36.2.1.12.5.2.12.1
An entry in the mscLpDS3TestResultsTable.
OBJECT-TYPE    
  MscLpDS3TestResultsEntry  

mscLpDS3TestElapsedTime 1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.1
This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
OBJECT-TYPE    
  Counter32  

mscLpDS3TestTimeRemaining 1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.2
This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscLpDS3TestCauseOfTermination 1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.3
This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4), hardwareReconfigured(5), loopCodeSyncFailed(6), patternSyncFailed(7), patternSyncLost(8)  

mscLpDS3TestBitsTx 1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.4
This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS3TestBytesTx 1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.5
This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS3TestFrmTx 1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.6
This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS3TestBitsRx 1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.7
This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS3TestBytesRx 1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.8
This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS3TestFrmRx 1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.9
This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS3TestErroredFrmRx 1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.10
This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS3TestBitErrorRate 1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.11
This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
OBJECT-TYPE    
  AsciiString SIZE(5)  

mscLpDS3CBit 1.3.6.1.4.1.562.36.2.1.12.5.3
OBJECT IDENTIFIER    

mscLpDS3CBitRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.5.3.1
This entry controls the addition and deletion of mscLpDS3CBit components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3CBitRowStatusEntry

mscLpDS3CBitRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.5.3.1.1
A single entry in the table represents a single mscLpDS3CBit component.
OBJECT-TYPE    
  MscLpDS3CBitRowStatusEntry  

mscLpDS3CBitRowStatus 1.3.6.1.4.1.562.36.2.1.12.5.3.1.1.1
This variable is used as the basis for SNMP naming of mscLpDS3CBit components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscLpDS3CBitComponentName 1.3.6.1.4.1.562.36.2.1.12.5.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpDS3CBitStorageType 1.3.6.1.4.1.562.36.2.1.12.5.3.1.1.4
This variable represents the storage type value for the mscLpDS3CBit tables.
OBJECT-TYPE    
  StorageType  

mscLpDS3CBitIndex 1.3.6.1.4.1.562.36.2.1.12.5.3.1.1.10
This variable represents the index for the mscLpDS3CBit tables.
OBJECT-TYPE    
  NonReplicated  

mscLpDS3CBitOperationalTable 1.3.6.1.4.1.562.36.2.1.12.5.3.10
This group contains the DS3 C-Bit Parity operational data for the CBIT component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3CBitOperationalEntry

mscLpDS3CBitOperationalEntry 1.3.6.1.4.1.562.36.2.1.12.5.3.10.1
An entry in the mscLpDS3CBitOperationalTable.
OBJECT-TYPE    
  MscLpDS3CBitOperationalEntry  

mscLpDS3CBitFarEndAlarm 1.3.6.1.4.1.562.36.2.1.12.5.3.10.1.1
This attribute indicates the Far-End alarm signal that is currently received at the DS3 interface. This signal is carried over the Far- End Alarm and Control (FEAC) bits of DS3 frames. Five far-end alarm signals can be received: far-end equipment failure that is received when the far-end terminal has detected a local equipment failure; far-end Loss Of Signal (LOS) that is received when the far- end DS3 terminal has declared a LOS failure condition; far-end Loss of Frame (LOF) when the far-end DS3 terminal has declared a Loss Of Frame (LOF) failure condition; far-end Alarm Indication Signal (AIS) when the far-end has declared an AIS failure condition; far-end Idle when the far-end has declared an Idle signal condition.
OBJECT-TYPE    
  INTEGER equipmentFailure(0), los(1), sef(2), ais(3), idle(4), none(5)  

mscLpDS3CBitLoopedbackToFarEnd 1.3.6.1.4.1.562.36.2.1.12.5.3.10.1.2
This indicates whether or not the DS3 component is currently looping back the incoming DS3 signal or one of its DS1 tributaries to the far-end DS3 terminal. This is activated when the far-end DS3 equipment has ordered the local terminal to do so. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) notused29(29) notused30(30) ds3Line(31)
OBJECT-TYPE    
  OCTET STRING SIZE(4)  

mscLpDS3CBitLoopbackAtFarEndRequested 1.3.6.1.4.1.562.36.2.1.12.5.3.10.1.3
This attribute indicates which DS1 tributaries are being looped back, or if the DS3 line is being looped back. Each value listed indicates a loopback request has been made. When a loopback deactivation command has been sent to the far end, the corresponding value will be removed from the list. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) notused29(29) notused30(30) ds3Line(31)
OBJECT-TYPE    
  OCTET STRING SIZE(4)  

mscLpDS3CBitStatsTable 1.3.6.1.4.1.562.36.2.1.12.5.3.11
This group contains the DS3 C-Bit Parity statistical data for the CBIT component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3CBitStatsEntry

mscLpDS3CBitStatsEntry 1.3.6.1.4.1.562.36.2.1.12.5.3.11.1
An entry in the mscLpDS3CBitStatsTable.
OBJECT-TYPE    
  MscLpDS3CBitStatsEntry  

mscLpDS3CBitCbitErrorFreeSec 1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.1
This attribute indicates the number of seconds that the DS3 port has not suffered any C-Bit errors.
OBJECT-TYPE    
  Counter32  

mscLpDS3CBitCbitCodeViolations 1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.2
This attribute indicates the total count of C-Bit Parity Code Violations (CCV). A CCV is obtained when the parity calculated over the previous DS3 frame and the value of the CP-bits appearing in the current DS3 frame differ. The value of this attribute will wrap around to 0 if it does reach its maximum value. CCV counting is inhibited for second intervals where C-Bit Parity Severely Errored Seconds (CSES) are counted. It is also inhibited for second intervals where C-Bit Unavailable Seconds (CUAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  Counter32  

mscLpDS3CBitCbitErroredSec 1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.3
This attribute indicates the total number of C-Bit Parity Errored Seconds (CES). A CES second is declared for second intervals containing one or more CCVs or when one or more SEF (Severely Errored Frame) or AIS (Alarm Indication Signal) defects. CES counting is inhibited for second intervals where C-Bit Unavailable Seconds (CUAS) are counted.
OBJECT-TYPE    
  Counter32  

mscLpDS3CBitCbitSevErroredSec 1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.4
This attribute indicates the total number of C-Bit Parity Severely Errored Seconds (CSES). A CSES is declared for second intervals containing more than 44 CCVs or one or more SEF or AIS defects. The occurrence of CSES in a one second interval causes the inhibition of CCV counting during that second interval. CSES counting is also inhibited for second intervals where C-Bit Unavailable Seconds (CUAS) are counted.
OBJECT-TYPE    
  Counter32  

mscLpDS3CBitCbitUnavailSec 1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.5
This attribute indicates the total number of one second intervals for which the DS3 path is unavailable. The DS3 path becomes unavailable at the onset of 10 consecutive C-Bit Severely Errored Seconds (CSES). The 10 CSESs are included in the unavailable time. Once unavailable, the DS3 path becomes available at the onset of 10 contiguous seconds with no CSES. The 10 seconds with no CSES are excluded from the unavailable time. For second intervals where CUAS is counted, counting of C-Bit Coding Violations (CCV), C-Bit Errored Seconds (CES) and C-Bit Severely Errored Seconds (CSES) is inhibited.
OBJECT-TYPE    
  Counter32  

mscLpDS3CBitFarEndErrorFreeSec 1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.6
This attribute indicates the number of seconds that the DS3 port has not suffered of any far-end errors.
OBJECT-TYPE    
  Counter32  

mscLpDS3CBitFarEndCodeViolations 1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.7
This attribute indicates the total count of DS3 frames containing a Coding Violation on the Far-End (FECV), also known as a Far-End Block Error (FEBE). Each FEBE is reported over the FEBE bits each time the far-end DS3 terminal detects a C-BIT Parity error over a received DS3 frame. For second intervals where Far-End Unavailable Seconds (FEAUS) or Far-End Severely Errored Seconds (FESES) are counted, counting of FECVs is inhibited. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  Counter32  

mscLpDS3CBitFarEndErroredSec 1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.8
This attribute indicates the total number of Far-End Errored Seconds (FEES). A FEES is declared for second intervals containing with one or more FECVs or one or more far-end SEF/ AIS defects. A far-end SEF/AIS defect occurs when the X-Bits of the DS3 frame are received as being set to zero. For second intervals where Far-End Unavailable Seconds (FEUAS) are counted, counting of FEESs is inhibited.
OBJECT-TYPE    
  Counter32  

mscLpDS3CBitFarEndSevErroredSec 1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.9
This attribute indicates the total number of Far-End Severely Errored Seconds (FESES). A FESES is declared for second intervals containing more than 44 FECVs or one or more far-end SEF/AIS defects. For second intervals where a FESES is counted, counting of FECVs is inhibited. For second intervals where Far-End Unavailable Seconds (FEUAS) are counted, counting of FESESs is inhibited.
OBJECT-TYPE    
  Counter32  

mscLpDS3CBitFarEndSefAisSec 1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.10
This attribute indicates the total number of Far-End SEF/AIS Seconds (FESAS). A FESAS is declared for second intervals containing one or more far-end SEF/AIS defects.For second intervals where Far-End Unavailable Seconds (FEUAS) are counted, counting of FESASs is inhibited.
OBJECT-TYPE    
  Counter32  

mscLpDS3CBitFarEndUnavailSec 1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.11
This attribute indicates the total number of one second intervals for which the DS3 far-end path is unavailable. The DS3 far-end path becomes unavailable at the onset of 10 consecutive Far-End Severely Errored Seconds (FESES). The 10 FESESs are included in the unavailable time. Once unavailable, the DS3 far-end path becomes available at the onset of 10 contiguous seconds with no FESES. The 10 seconds with no FESES are excluded from the unavailable time. For second intervals where FEUAS is counted, counting of Far-End Coding Violations (FECV), Far-End Errored Seconds (FEES), Far-End Severely Errored Seconds (FESES) and Far-End Sef/Ais Seconds (FESAS) is inhibited.
OBJECT-TYPE    
  Counter32  

mscLpDS3CBitFarEndFailures 1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.12
This attribute indicates the total number of times that a far-end path failure (i.e. a Far-End SEF/AIS defect) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  Counter32  

mscLpDS3Plcp 1.3.6.1.4.1.562.36.2.1.12.5.4
OBJECT IDENTIFIER    

mscLpDS3PlcpRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.5.4.1
This entry controls the addition and deletion of mscLpDS3Plcp components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3PlcpRowStatusEntry

mscLpDS3PlcpRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.5.4.1.1
A single entry in the table represents a single mscLpDS3Plcp component.
OBJECT-TYPE    
  MscLpDS3PlcpRowStatusEntry  

mscLpDS3PlcpRowStatus 1.3.6.1.4.1.562.36.2.1.12.5.4.1.1.1
This variable is used as the basis for SNMP naming of mscLpDS3Plcp components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscLpDS3PlcpComponentName 1.3.6.1.4.1.562.36.2.1.12.5.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpDS3PlcpStorageType 1.3.6.1.4.1.562.36.2.1.12.5.4.1.1.4
This variable represents the storage type value for the mscLpDS3Plcp tables.
OBJECT-TYPE    
  StorageType  

mscLpDS3PlcpIndex 1.3.6.1.4.1.562.36.2.1.12.5.4.1.1.10
This variable represents the index for the mscLpDS3Plcp tables.
OBJECT-TYPE    
  NonReplicated  

mscLpDS3PlcpOperationalTable 1.3.6.1.4.1.562.36.2.1.12.5.4.10
This group contains the operational data for the PLCP component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3PlcpOperationalEntry

mscLpDS3PlcpOperationalEntry 1.3.6.1.4.1.562.36.2.1.12.5.4.10.1
An entry in the mscLpDS3PlcpOperationalTable.
OBJECT-TYPE    
  MscLpDS3PlcpOperationalEntry  

mscLpDS3PlcpLofAlarm 1.3.6.1.4.1.562.36.2.1.12.5.4.10.1.1
This attribute displays whether a PLCP Loss Of Frame (LOF) failure alarm state has been entered. An LOF failure is declared when a PLCP LOF defect persists for 2.5 s +/- 0.5 s. An LOF defect occurs when an OOF (Out of Frame) state persists for more than 1 ms. If the OOF events are intermittent, the LOF defect counter is decremented at a rate of 1/12 (for DS3 PLCP) or 1/9 (for G.751 E3 PLCP) of the incrementing rate, with all measurements based on a 200 ms polling cycle. An OOF event (also known as a PLCP SEF event) is declared when an error is detected in both the A1 and A2 octets, or when two consecutive POHIDs are found in error. OOF is removed when two valid sets of framing octets and two valid and sequential POHID octets have been found. The LOF defect is removed when the defect counter reaches zero, i.e. when OOF events are absent for more than 12 ms (DS3 PLCP) or 9 ms (G.751 E3 PLCP). LOF failure alarm is cleared when LOF defect is absent for 10.0 s +/- 0.5 s The DS3 or E3 component goes into an operational state of disabled until the LOF failure alarm is cleared. The terminal declaring the LOF failure alarm will transmit a PLCP RAI signal to the far-end for the duration of the alarm. The lofAlarm attribute is always set to off when the DS3 or E3 component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpDS3PlcpRxRaiAlarm 1.3.6.1.4.1.562.36.2.1.12.5.4.10.1.2
This attribute displays whether a PLCP Remote Alarm Indication (RAI) failure alarm state has been entered. An RAI failure alarm occurs when ten consecutive PLCP RAI bits (bit 5 in the G1 byte) are high on the incoming line. An RAI failure alarm is cleared when ten consecutive RAI bits are set to 0. Note: Some standards call this alarm RFI. The rxRaiAlarm attribute is always set to off when the DS3 or E3 component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpDS3PlcpStatsTable 1.3.6.1.4.1.562.36.2.1.12.5.4.11
This group contains the statistical data for the PLCP component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3PlcpStatsEntry

mscLpDS3PlcpStatsEntry 1.3.6.1.4.1.562.36.2.1.12.5.4.11.1
An entry in the mscLpDS3PlcpStatsTable.
OBJECT-TYPE    
  MscLpDS3PlcpStatsEntry  

mscLpDS3PlcpErrorFreeSec 1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.1
This attribute indicates the number of seconds during which the near-end PLCP path layer had no errors.
OBJECT-TYPE    
  Counter32  

mscLpDS3PlcpCodingViolations 1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.2
This attribute indicates the total number of BIP-8 Errors, framing pattern octet errors, and path overhead identification errors detected in received PLCP frames. Counting of PLCP CV is inhibited for second intervals where PLCP Severely Errored Framing Seconds (SEFS) or PLCP Unavailable Seconds (UAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  Counter32  

mscLpDS3PlcpErroredSec 1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.3
This attribute indicates the number of seconds containing one or more PLCP Coding Violations (CV) or in which a PLCP Severely Errored Framing Second (SEFS) was counted. Counting of PLCP ES is inhibited during second intervals where PLCP Unavailable Seconds (UAS) are counted.
OBJECT-TYPE    
  Counter32  

mscLpDS3PlcpSevErroredSec 1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.4
This attribute indicates the number of seconds containing 5 or more PLCPCVs or in which a PLCPSEFS was counted (i.e. a PLCP OOF event occurred). Counting of PLCP SES is inhibited during second intervals where PLCP Unavailable Seconds (UAS) are counted.
OBJECT-TYPE    
  Counter32  

mscLpDS3PlcpSevErroredFramingSec 1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.5
This attribute indicates the number of seconds containing one or more PLCP Severely Errored Frame (SEF) events. An SEF event is equivalent to a PLCP OOF (Out of Frame) event. Counting of PLCPP SEFSs is inhibited for second intervals where PLCP Unavailable Seconds (UAS) are counted.
OBJECT-TYPE    
  Counter32  

mscLpDS3PlcpUnavailSec 1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.6
This attribute indicates the number of seconds when the near-end PLCP layer is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP LOF (Loss of Frame) failure alarm state. The PLCP Path Layer becomes available again only after clearing this condition. For second intervals where PLCP UAS are counted, counting of PLCP Severely Errored Framing Seconds (SEFS), PLCP Coding Violations (CV), PLCP Errored Seconds (ES), PLCP Severely Errored Seconds (SES) and PLCP Far-End Severely Errored Seconds (FESES) is inhibited.
OBJECT-TYPE    
  Counter32  

mscLpDS3PlcpFarEndErrorFreeSec 1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.7
This attribute indicates the number of seconds during which the far- end PLCP path layer had no errors.
OBJECT-TYPE    
  Counter32  

mscLpDS3PlcpFarEndCodingViolations 1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.8
This attribute indicates the total number of PLCP Far-End Block Errors (FEBE) reported by the far-end terminal. Counting of FEBEs is inhibited for second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  Counter32  

mscLpDS3PlcpFarEndErroredSec 1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.9
This attribute indicates the number of seconds containing one or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FEES is inhibited during second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted.
OBJECT-TYPE    
  Counter32  

mscLpDS3PlcpFarEndSevErroredSec 1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.10
This attribute indicates the number of seconds containing 5 or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FESES is inhibited for second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted.
OBJECT-TYPE    
  Counter32  

mscLpDS3PlcpFarEndUnavailableSec 1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.11
This attribute indicates the number of seconds during which the PLCP far end is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP RAI (Remote Alarm Indication). Service becomes available again after this condition is cleared. For second intervals where PLCP FEUAS are counted, counting of PLCP Far-End Coding Violations (FECV), PLCP Far- End Errored Seconds (FEES), and PLCP Far-End Severely Errored Seconds (FESES) is inhibited.
OBJECT-TYPE    
  Counter32  

mscLpDS3Cell 1.3.6.1.4.1.562.36.2.1.12.5.5
OBJECT IDENTIFIER    

mscLpDS3CellRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.5.5.1
This entry controls the addition and deletion of mscLpDS3Cell components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3CellRowStatusEntry

mscLpDS3CellRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.5.5.1.1
A single entry in the table represents a single mscLpDS3Cell component.
OBJECT-TYPE    
  MscLpDS3CellRowStatusEntry  

mscLpDS3CellRowStatus 1.3.6.1.4.1.562.36.2.1.12.5.5.1.1.1
This variable is used as the basis for SNMP naming of mscLpDS3Cell components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscLpDS3CellComponentName 1.3.6.1.4.1.562.36.2.1.12.5.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpDS3CellStorageType 1.3.6.1.4.1.562.36.2.1.12.5.5.1.1.4
This variable represents the storage type value for the mscLpDS3Cell tables.
OBJECT-TYPE    
  StorageType  

mscLpDS3CellIndex 1.3.6.1.4.1.562.36.2.1.12.5.5.1.1.10
This variable represents the index for the mscLpDS3Cell tables.
OBJECT-TYPE    
  NonReplicated  

mscLpDS3CellProvTable 1.3.6.1.4.1.562.36.2.1.12.5.5.10
This group contains the provisioning attributes for the AtmCell component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3CellProvEntry

mscLpDS3CellProvEntry 1.3.6.1.4.1.562.36.2.1.12.5.5.10.1
An entry in the mscLpDS3CellProvTable.
OBJECT-TYPE    
  MscLpDS3CellProvEntry  

mscLpDS3CellAlarmActDelay 1.3.6.1.4.1.562.36.2.1.12.5.5.10.1.1
This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
OBJECT-TYPE    
  Unsigned32 0..2000  

mscLpDS3CellScrambleCellPayload 1.3.6.1.4.1.562.36.2.1.12.5.5.10.1.2
Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscLpDS3CellCorrectSingleBitHeaderErrors 1.3.6.1.4.1.562.36.2.1.12.5.5.10.1.3
This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscLpDS3CellOperTable 1.3.6.1.4.1.562.36.2.1.12.5.5.11
This group contains the common operational attributes for the AtmCell component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3CellOperEntry

mscLpDS3CellOperEntry 1.3.6.1.4.1.562.36.2.1.12.5.5.11.1
An entry in the mscLpDS3CellOperTable.
OBJECT-TYPE    
  MscLpDS3CellOperEntry  

mscLpDS3CellLcdAlarm 1.3.6.1.4.1.562.36.2.1.12.5.5.11.1.1
This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpDS3CellStatsTable 1.3.6.1.4.1.562.36.2.1.12.5.5.12
This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3CellStatsEntry

mscLpDS3CellStatsEntry 1.3.6.1.4.1.562.36.2.1.12.5.5.12.1
An entry in the mscLpDS3CellStatsTable.
OBJECT-TYPE    
  MscLpDS3CellStatsEntry  

mscLpDS3CellUncorrectableHecErrors 1.3.6.1.4.1.562.36.2.1.12.5.5.12.1.1
This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
OBJECT-TYPE    
  Counter32  

mscLpDS3CellSevErroredSec 1.3.6.1.4.1.562.36.2.1.12.5.5.12.1.2
This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
OBJECT-TYPE    
  Counter32  

mscLpDS3CellReceiveCellUtilization 1.3.6.1.4.1.562.36.2.1.12.5.5.12.1.3
This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  Gauge32 0..100  

mscLpDS3CellTransmitCellUtilization 1.3.6.1.4.1.562.36.2.1.12.5.5.12.1.4
This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  Gauge32 0..100  

mscLpDS3CellCorrectableHeaderErrors 1.3.6.1.4.1.562.36.2.1.12.5.5.12.1.5
This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
OBJECT-TYPE    
  Counter32  

mscLpDS3DS1 1.3.6.1.4.1.562.36.2.1.12.5.6
OBJECT IDENTIFIER    

mscLpDS3DS1RowStatusTable 1.3.6.1.4.1.562.36.2.1.12.5.6.1
This entry controls the addition and deletion of mscLpDS3DS1 components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1RowStatusEntry

mscLpDS3DS1RowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.1.1
A single entry in the table represents a single mscLpDS3DS1 component.
OBJECT-TYPE    
  MscLpDS3DS1RowStatusEntry  

mscLpDS3DS1RowStatus 1.3.6.1.4.1.562.36.2.1.12.5.6.1.1.1
This variable is used as the basis for SNMP naming of mscLpDS3DS1 components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscLpDS3DS1ComponentName 1.3.6.1.4.1.562.36.2.1.12.5.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpDS3DS1StorageType 1.3.6.1.4.1.562.36.2.1.12.5.6.1.1.4
This variable represents the storage type value for the mscLpDS3DS1 tables.
OBJECT-TYPE    
  StorageType  

mscLpDS3DS1Index 1.3.6.1.4.1.562.36.2.1.12.5.6.1.1.10
This variable represents the index for the mscLpDS3DS1 tables.
OBJECT-TYPE    
  Integer32 1..28  

mscLpDS3DS1Chan 1.3.6.1.4.1.562.36.2.1.12.5.6.2
OBJECT IDENTIFIER    

mscLpDS3DS1ChanRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.5.6.2.1
This entry controls the addition and deletion of mscLpDS3DS1Chan components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1ChanRowStatusEntry

mscLpDS3DS1ChanRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.2.1.1
A single entry in the table represents a single mscLpDS3DS1Chan component.
OBJECT-TYPE    
  MscLpDS3DS1ChanRowStatusEntry  

mscLpDS3DS1ChanRowStatus 1.3.6.1.4.1.562.36.2.1.12.5.6.2.1.1.1
This variable is used as the basis for SNMP naming of mscLpDS3DS1Chan components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscLpDS3DS1ChanComponentName 1.3.6.1.4.1.562.36.2.1.12.5.6.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpDS3DS1ChanStorageType 1.3.6.1.4.1.562.36.2.1.12.5.6.2.1.1.4
This variable represents the storage type value for the mscLpDS3DS1Chan tables.
OBJECT-TYPE    
  StorageType  

mscLpDS3DS1ChanIndex 1.3.6.1.4.1.562.36.2.1.12.5.6.2.1.1.10
This variable represents the index for the mscLpDS3DS1Chan tables.
OBJECT-TYPE    
  Integer32 0  

mscLpDS3DS1ChanTest 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2
OBJECT IDENTIFIER    

mscLpDS3DS1ChanTestRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1
This entry controls the addition and deletion of mscLpDS3DS1ChanTest components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1ChanTestRowStatusEntry

mscLpDS3DS1ChanTestRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1.1
A single entry in the table represents a single mscLpDS3DS1ChanTest component.
OBJECT-TYPE    
  MscLpDS3DS1ChanTestRowStatusEntry  

mscLpDS3DS1ChanTestRowStatus 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1.1.1
This variable is used as the basis for SNMP naming of mscLpDS3DS1ChanTest components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscLpDS3DS1ChanTestComponentName 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpDS3DS1ChanTestStorageType 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1.1.4
This variable represents the storage type value for the mscLpDS3DS1ChanTest tables.
OBJECT-TYPE    
  StorageType  

mscLpDS3DS1ChanTestIndex 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1.1.10
This variable represents the index for the mscLpDS3DS1ChanTest tables.
OBJECT-TYPE    
  NonReplicated  

mscLpDS3DS1ChanTestStateTable 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1ChanTestStateEntry

mscLpDS3DS1ChanTestStateEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.10.1
An entry in the mscLpDS3DS1ChanTestStateTable.
OBJECT-TYPE    
  MscLpDS3DS1ChanTestStateEntry  

mscLpDS3DS1ChanTestAdminState 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscLpDS3DS1ChanTestOperationalState 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpDS3DS1ChanTestUsageState 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscLpDS3DS1ChanTestSetupTable 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11
This group contains all of the operational data for a Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1ChanTestSetupEntry

mscLpDS3DS1ChanTestSetupEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1
An entry in the mscLpDS3DS1ChanTestSetupTable.
OBJECT-TYPE    
  MscLpDS3DS1ChanTestSetupEntry  

mscLpDS3DS1ChanTestPurpose 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.1
This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
OBJECT-TYPE    
  AsciiString SIZE(0..40)  

mscLpDS3DS1ChanTestType 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.2
This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
OBJECT-TYPE    
  INTEGER card(0), manual(1), localLoop(2), remoteLoop(3), externalLoop(4), payloadLoop(5), remoteLoopThisTrib(6), v54RemoteLoop(7), pn127RemoteLoop(8)  

mscLpDS3DS1ChanTestFrmSize 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.3
This attribute defines the size of the test data frames in number of bytes.
OBJECT-TYPE    
  Unsigned32 4..4096  

mscLpDS3DS1ChanTestFrmPatternType 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.4
This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
OBJECT-TYPE    
  INTEGER ccitt32kBitPattern(0), ccitt8MBitPattern(1), customizedPattern(2)  

mscLpDS3DS1ChanTestCustomizedPattern 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.5
This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
OBJECT-TYPE    
  Hex 0..4294967295  

mscLpDS3DS1ChanTestDataStartDelay 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.6
This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
OBJECT-TYPE    
  Unsigned32 0..1814400  

mscLpDS3DS1ChanTestDisplayInterval 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.7
This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
OBJECT-TYPE    
  Unsigned32 0..30240  

mscLpDS3DS1ChanTestDuration 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.8
This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
OBJECT-TYPE    
  Unsigned32 1..30240  

mscLpDS3DS1ChanTestResultsTable 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12
This group contains all the statistics related attributes of the Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1ChanTestResultsEntry

mscLpDS3DS1ChanTestResultsEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1
An entry in the mscLpDS3DS1ChanTestResultsTable.
OBJECT-TYPE    
  MscLpDS3DS1ChanTestResultsEntry  

mscLpDS3DS1ChanTestElapsedTime 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.1
This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
OBJECT-TYPE    
  Counter32  

mscLpDS3DS1ChanTestTimeRemaining 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.2
This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscLpDS3DS1ChanTestCauseOfTermination 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.3
This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4), hardwareReconfigured(5), loopCodeSyncFailed(6), patternSyncFailed(7), patternSyncLost(8)  

mscLpDS3DS1ChanTestBitsTx 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.4
This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS3DS1ChanTestBytesTx 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.5
This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS3DS1ChanTestFrmTx 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.6
This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS3DS1ChanTestBitsRx 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.7
This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS3DS1ChanTestBytesRx 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.8
This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS3DS1ChanTestFrmRx 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.9
This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS3DS1ChanTestErroredFrmRx 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.10
This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS3DS1ChanTestBitErrorRate 1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.11
This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
OBJECT-TYPE    
  AsciiString SIZE(5)  

mscLpDS3DS1ChanCell 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3
OBJECT IDENTIFIER    

mscLpDS3DS1ChanCellRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1
This entry controls the addition and deletion of mscLpDS3DS1ChanCell components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1ChanCellRowStatusEntry

mscLpDS3DS1ChanCellRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1.1
A single entry in the table represents a single mscLpDS3DS1ChanCell component.
OBJECT-TYPE    
  MscLpDS3DS1ChanCellRowStatusEntry  

mscLpDS3DS1ChanCellRowStatus 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1.1.1
This variable is used as the basis for SNMP naming of mscLpDS3DS1ChanCell components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscLpDS3DS1ChanCellComponentName 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpDS3DS1ChanCellStorageType 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1.1.4
This variable represents the storage type value for the mscLpDS3DS1ChanCell tables.
OBJECT-TYPE    
  StorageType  

mscLpDS3DS1ChanCellIndex 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1.1.10
This variable represents the index for the mscLpDS3DS1ChanCell tables.
OBJECT-TYPE    
  NonReplicated  

mscLpDS3DS1ChanCellProvTable 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.10
This group contains the provisioning attributes for the AtmCell component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1ChanCellProvEntry

mscLpDS3DS1ChanCellProvEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.10.1
An entry in the mscLpDS3DS1ChanCellProvTable.
OBJECT-TYPE    
  MscLpDS3DS1ChanCellProvEntry  

mscLpDS3DS1ChanCellAlarmActDelay 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.10.1.1
This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
OBJECT-TYPE    
  Unsigned32 0..2000  

mscLpDS3DS1ChanCellScrambleCellPayload 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.10.1.2
Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscLpDS3DS1ChanCellCorrectSingleBitHeaderErrors 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.10.1.3
This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscLpDS3DS1ChanCellOperTable 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.11
This group contains the common operational attributes for the AtmCell component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1ChanCellOperEntry

mscLpDS3DS1ChanCellOperEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.11.1
An entry in the mscLpDS3DS1ChanCellOperTable.
OBJECT-TYPE    
  MscLpDS3DS1ChanCellOperEntry  

mscLpDS3DS1ChanCellLcdAlarm 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.11.1.1
This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpDS3DS1ChanCellStatsTable 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12
This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1ChanCellStatsEntry

mscLpDS3DS1ChanCellStatsEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1
An entry in the mscLpDS3DS1ChanCellStatsTable.
OBJECT-TYPE    
  MscLpDS3DS1ChanCellStatsEntry  

mscLpDS3DS1ChanCellUncorrectableHecErrors 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1.1
This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
OBJECT-TYPE    
  Counter32  

mscLpDS3DS1ChanCellSevErroredSec 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1.2
This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
OBJECT-TYPE    
  Counter32  

mscLpDS3DS1ChanCellReceiveCellUtilization 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1.3
This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  Gauge32 0..100  

mscLpDS3DS1ChanCellTransmitCellUtilization 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1.4
This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  Gauge32 0..100  

mscLpDS3DS1ChanCellCorrectableHeaderErrors 1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1.5
This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
OBJECT-TYPE    
  Counter32  

mscLpDS3DS1ChanTc 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4
OBJECT IDENTIFIER    

mscLpDS3DS1ChanTcRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1
This entry controls the addition and deletion of mscLpDS3DS1ChanTc components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1ChanTcRowStatusEntry

mscLpDS3DS1ChanTcRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1.1
A single entry in the table represents a single mscLpDS3DS1ChanTc component.
OBJECT-TYPE    
  MscLpDS3DS1ChanTcRowStatusEntry  

mscLpDS3DS1ChanTcRowStatus 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1.1.1
This variable is used as the basis for SNMP naming of mscLpDS3DS1ChanTc components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscLpDS3DS1ChanTcComponentName 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpDS3DS1ChanTcStorageType 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1.1.4
This variable represents the storage type value for the mscLpDS3DS1ChanTc tables.
OBJECT-TYPE    
  StorageType  

mscLpDS3DS1ChanTcIndex 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1.1.10
This variable represents the index for the mscLpDS3DS1ChanTc tables.
OBJECT-TYPE    
  NonReplicated  

mscLpDS3DS1ChanTcProvTable 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.10
This group contains all specific provisioning data for a Tc component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1ChanTcProvEntry

mscLpDS3DS1ChanTcProvEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.10.1
An entry in the mscLpDS3DS1ChanTcProvTable.
OBJECT-TYPE    
  MscLpDS3DS1ChanTcProvEntry  

mscLpDS3DS1ChanTcReplacementData 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.10.1.1
This attribute specifies the trunk conditioning data byte to be substituted into the timeslots defined by the Chan component under fault conditions. replacementData can be set to any two digit hexadecimal number. The following are recommended values: DS1 MUX Out Of Service Code = 0x1A E1 MUX Out Of Service Code = 0xFF
OBJECT-TYPE    
  Hex 0..255  

mscLpDS3DS1ChanTcSignalOneDuration 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.10.1.2
This attribute specifies the time duration in seconds for which signalOne is substituted into the appropriate signaling bits, when a lineType that uses CAS has been defined. When signalOneDuration has expired signalTwo is substituted into the appropriate signaling bits. If signalOneDuration is set to zero then only signalTwo is substituted into the appropriate signaling bits during error conditions. signalOneDuration can be set to any integer value from 0 to 60 seconds.
OBJECT-TYPE    
  Unsigned32 0..60  

mscLpDS3DS1ChanTcOpTable 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.11
This group contains all specific operational data for a Tc component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1ChanTcOpEntry

mscLpDS3DS1ChanTcOpEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.11.1
An entry in the mscLpDS3DS1ChanTcOpTable.
OBJECT-TYPE    
  MscLpDS3DS1ChanTcOpEntry  

mscLpDS3DS1ChanTcIngressConditioning 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.11.1.1
This attribute indicates the status of locally generated trunk conditioning towards the ATM network. When trunk conditioning is being locally generated towards the ATM network, ingressConditioning is set to on. When trunk conditioning is not being locally generated towards the ATM network, ingressConditioning is set to off. Trunk conditioning is transmitted towards the ATM network under the following conditions: lossOfSignal (LOS) lossOfFrame (LOF) remoteAlarmIndication (RAI) alarmIndicationSignal (AIS) bufferUnderflow (BU) and in addition for E1: lossOfMultiframe (LOMF) receiveMultiframeRemoteAlarmIndication (RMRAI)
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscLpDS3DS1ChanTcEgressConditioning 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.11.1.2
This attribute indicates the status of locally generated trunk conditioning towards the PDH line. When trunk conditioning is being locally generated towards the PDH line, egressConditioning is set to on. When trunk conditioning is not being locally generated towards the PDH line, egressConditioning is set to off. Trunk conditioning is transmitted towards the PDH line under the following conditions: bufferUnderflow (BU) AAL1 protocol errors.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscLpDS3DS1ChanTcSigOneTable 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.398
This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted for the duration provisioned in signalOneDuration when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1ChanTcSigOneEntry

mscLpDS3DS1ChanTcSigOneEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.398.1
An entry in the mscLpDS3DS1ChanTcSigOneTable.
OBJECT-TYPE    
  MscLpDS3DS1ChanTcSigOneEntry  

mscLpDS3DS1ChanTcSigOneIndex 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.398.1.1
This variable represents the mscLpDS3DS1ChanTcSigOneTable specific index for the mscLpDS3DS1ChanTcSigOneTable.
OBJECT-TYPE    
  INTEGER d(0), c(1), b(2), a(3)  

mscLpDS3DS1ChanTcSigOneValue 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.398.1.2
This variable represents an individual value for the mscLpDS3DS1ChanTcSigOneTable.
OBJECT-TYPE    
  Unsigned32 0..1  

mscLpDS3DS1ChanTcSigTwoTable 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.399
This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted after the duration provisioned in signalOneDuration has expired and when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1ChanTcSigTwoEntry

mscLpDS3DS1ChanTcSigTwoEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.399.1
An entry in the mscLpDS3DS1ChanTcSigTwoTable.
OBJECT-TYPE    
  MscLpDS3DS1ChanTcSigTwoEntry  

mscLpDS3DS1ChanTcSigTwoIndex 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.399.1.1
This variable represents the mscLpDS3DS1ChanTcSigTwoTable specific index for the mscLpDS3DS1ChanTcSigTwoTable.
OBJECT-TYPE    
  INTEGER d(0), c(1), b(2), a(3)  

mscLpDS3DS1ChanTcSigTwoValue 1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.399.1.2
This variable represents an individual value for the mscLpDS3DS1ChanTcSigTwoTable.
OBJECT-TYPE    
  Unsigned32 0..1  

mscLpDS3DS1ChanProvTable 1.3.6.1.4.1.562.36.2.1.12.5.6.2.10
This group contains all of the provisional data for a Channel component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1ChanProvEntry

mscLpDS3DS1ChanProvEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.2.10.1
An entry in the mscLpDS3DS1ChanProvTable.
OBJECT-TYPE    
  MscLpDS3DS1ChanProvEntry  

mscLpDS3DS1ChanTimeslots 1.3.6.1.4.1.562.36.2.1.12.5.6.2.10.1.1
This attribute contains the list of timeslots that are used by the Channel component. Valid numbers are 1-24 for a Channel used by a DS1 component, and 1-31 for a Channel used by an E1 component. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) n29(29) n30(30) n31(31)
OBJECT-TYPE    
  OCTET STRING SIZE(4)  

mscLpDS3DS1ChanTimeslotDataRate 1.3.6.1.4.1.562.36.2.1.12.5.6.2.10.1.2
This attribute selects the data rate of the timeslots in a channel of a DS1 component. For E1, the data rate of the timeslots will always be 64kbit/s regardless of this attribute. When doNotOverride is selected for a channel on a DS1, the data rate of the channel's timeslots are dependant on the zeroCoding selection of the DS1 component. If the zeroCoding is B8ZS (where supported on the FP) or none, the timeslot's data rate will be 64kbit/ s. If the zeroCoding option is bit7Stuffing, the data rate of a timeslot will be 56kbit/s. When 56k is selected for a channel on a DS1, the least significant bit of each timeslot of this Channel will always be set to 1 and not used for data. The data rate for the timeslots of this channel is therefore restricted to 56kbit/s. One application of this attribute is to allow a DS1 line to support mixing channels that originate from lines that use different zeroCoding schemes.
OBJECT-TYPE    
  INTEGER n56k(0), doNotOverride(1)  

mscLpDS3DS1ChanApplicationFramerName 1.3.6.1.4.1.562.36.2.1.12.5.6.2.10.1.3
This attribute defines the link to the software stack. It defines which application is running on top of this hardware component.
OBJECT-TYPE    
  Link  

mscLpDS3DS1ChanCidDataTable 1.3.6.1.4.1.562.36.2.1.12.5.6.2.11
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1ChanCidDataEntry

mscLpDS3DS1ChanCidDataEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.2.11.1
An entry in the mscLpDS3DS1ChanCidDataTable.
OBJECT-TYPE    
  MscLpDS3DS1ChanCidDataEntry  

mscLpDS3DS1ChanCustomerIdentifier 1.3.6.1.4.1.562.36.2.1.12.5.6.2.11.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

mscLpDS3DS1ChanIfEntryTable 1.3.6.1.4.1.562.36.2.1.12.5.6.2.12
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1ChanIfEntryEntry

mscLpDS3DS1ChanIfEntryEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.2.12.1
An entry in the mscLpDS3DS1ChanIfEntryTable.
OBJECT-TYPE    
  MscLpDS3DS1ChanIfEntryEntry  

mscLpDS3DS1ChanIfAdminStatus 1.3.6.1.4.1.562.36.2.1.12.5.6.2.12.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpDS3DS1ChanIfIndex 1.3.6.1.4.1.562.36.2.1.12.5.6.2.12.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscLpDS3DS1ChanOperStatusTable 1.3.6.1.4.1.562.36.2.1.12.5.6.2.13
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1ChanOperStatusEntry

mscLpDS3DS1ChanOperStatusEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.2.13.1
An entry in the mscLpDS3DS1ChanOperStatusTable.
OBJECT-TYPE    
  MscLpDS3DS1ChanOperStatusEntry  

mscLpDS3DS1ChanSnmpOperStatus 1.3.6.1.4.1.562.36.2.1.12.5.6.2.13.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpDS3DS1ChanStateTable 1.3.6.1.4.1.562.36.2.1.12.5.6.2.14
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1ChanStateEntry

mscLpDS3DS1ChanStateEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1
An entry in the mscLpDS3DS1ChanStateTable.
OBJECT-TYPE    
  MscLpDS3DS1ChanStateEntry  

mscLpDS3DS1ChanAdminState 1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscLpDS3DS1ChanOperationalState 1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpDS3DS1ChanUsageState 1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscLpDS3DS1ChanAvailabilityStatus 1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

mscLpDS3DS1ChanProceduralStatus 1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpDS3DS1ChanControlStatus 1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpDS3DS1ChanAlarmStatus 1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpDS3DS1ChanStandbyStatus 1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

mscLpDS3DS1ChanUnknownStatus 1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

mscLpDS3DS1ChanOperTable 1.3.6.1.4.1.562.36.2.1.12.5.6.2.15
This group contains all of the operational data for a Channel component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1ChanOperEntry

mscLpDS3DS1ChanOperEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.2.15.1
An entry in the mscLpDS3DS1ChanOperTable.
OBJECT-TYPE    
  MscLpDS3DS1ChanOperEntry  

mscLpDS3DS1ChanActualChannelSpeed 1.3.6.1.4.1.562.36.2.1.12.5.6.2.15.1.1
This attribute displays the measured link speed of the Channel component.
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscLpDS3DS1ChanAdminInfoTable 1.3.6.1.4.1.562.36.2.1.12.5.6.2.16
This group contains the attributes pertaining to the vendor of the equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1ChanAdminInfoEntry

mscLpDS3DS1ChanAdminInfoEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.2.16.1
An entry in the mscLpDS3DS1ChanAdminInfoTable.
OBJECT-TYPE    
  MscLpDS3DS1ChanAdminInfoEntry  

mscLpDS3DS1ChanVendor 1.3.6.1.4.1.562.36.2.1.12.5.6.2.16.1.1
This is the name of the vendor supplying the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..20)  

mscLpDS3DS1ChanCommentText 1.3.6.1.4.1.562.36.2.1.12.5.6.2.16.1.2
Any miscellaneous text about the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..60)  

mscLpDS3DS1Test 1.3.6.1.4.1.562.36.2.1.12.5.6.3
OBJECT IDENTIFIER    

mscLpDS3DS1TestRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.5.6.3.1
This entry controls the addition and deletion of mscLpDS3DS1Test components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1TestRowStatusEntry

mscLpDS3DS1TestRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.3.1.1
A single entry in the table represents a single mscLpDS3DS1Test component.
OBJECT-TYPE    
  MscLpDS3DS1TestRowStatusEntry  

mscLpDS3DS1TestRowStatus 1.3.6.1.4.1.562.36.2.1.12.5.6.3.1.1.1
This variable is used as the basis for SNMP naming of mscLpDS3DS1Test components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscLpDS3DS1TestComponentName 1.3.6.1.4.1.562.36.2.1.12.5.6.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpDS3DS1TestStorageType 1.3.6.1.4.1.562.36.2.1.12.5.6.3.1.1.4
This variable represents the storage type value for the mscLpDS3DS1Test tables.
OBJECT-TYPE    
  StorageType  

mscLpDS3DS1TestIndex 1.3.6.1.4.1.562.36.2.1.12.5.6.3.1.1.10
This variable represents the index for the mscLpDS3DS1Test tables.
OBJECT-TYPE    
  NonReplicated  

mscLpDS3DS1TestStateTable 1.3.6.1.4.1.562.36.2.1.12.5.6.3.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1TestStateEntry

mscLpDS3DS1TestStateEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.3.10.1
An entry in the mscLpDS3DS1TestStateTable.
OBJECT-TYPE    
  MscLpDS3DS1TestStateEntry  

mscLpDS3DS1TestAdminState 1.3.6.1.4.1.562.36.2.1.12.5.6.3.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscLpDS3DS1TestOperationalState 1.3.6.1.4.1.562.36.2.1.12.5.6.3.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpDS3DS1TestUsageState 1.3.6.1.4.1.562.36.2.1.12.5.6.3.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscLpDS3DS1TestSetupTable 1.3.6.1.4.1.562.36.2.1.12.5.6.3.11
This group contains all of the operational data for a Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1TestSetupEntry

mscLpDS3DS1TestSetupEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1
An entry in the mscLpDS3DS1TestSetupTable.
OBJECT-TYPE    
  MscLpDS3DS1TestSetupEntry  

mscLpDS3DS1TestPurpose 1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.1
This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
OBJECT-TYPE    
  AsciiString SIZE(0..40)  

mscLpDS3DS1TestType 1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.2
This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
OBJECT-TYPE    
  INTEGER card(0), manual(1), localLoop(2), remoteLoop(3), externalLoop(4), payloadLoop(5), remoteLoopThisTrib(6), v54RemoteLoop(7), pn127RemoteLoop(8)  

mscLpDS3DS1TestFrmSize 1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.3
This attribute defines the size of the test data frames in number of bytes.
OBJECT-TYPE    
  Unsigned32 4..4096  

mscLpDS3DS1TestFrmPatternType 1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.4
This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
OBJECT-TYPE    
  INTEGER ccitt32kBitPattern(0), ccitt8MBitPattern(1), customizedPattern(2)  

mscLpDS3DS1TestCustomizedPattern 1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.5
This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
OBJECT-TYPE    
  Hex 0..4294967295  

mscLpDS3DS1TestDataStartDelay 1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.6
This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
OBJECT-TYPE    
  Unsigned32 0..1814400  

mscLpDS3DS1TestDisplayInterval 1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.7
This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
OBJECT-TYPE    
  Unsigned32 0..30240  

mscLpDS3DS1TestDuration 1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.8
This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
OBJECT-TYPE    
  Unsigned32 1..30240  

mscLpDS3DS1TestResultsTable 1.3.6.1.4.1.562.36.2.1.12.5.6.3.12
This group contains all the statistics related attributes of the Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1TestResultsEntry

mscLpDS3DS1TestResultsEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1
An entry in the mscLpDS3DS1TestResultsTable.
OBJECT-TYPE    
  MscLpDS3DS1TestResultsEntry  

mscLpDS3DS1TestElapsedTime 1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.1
This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
OBJECT-TYPE    
  Counter32  

mscLpDS3DS1TestTimeRemaining 1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.2
This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscLpDS3DS1TestCauseOfTermination 1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.3
This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4), hardwareReconfigured(5), loopCodeSyncFailed(6), patternSyncFailed(7), patternSyncLost(8)  

mscLpDS3DS1TestBitsTx 1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.4
This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS3DS1TestBytesTx 1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.5
This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS3DS1TestFrmTx 1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.6
This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS3DS1TestBitsRx 1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.7
This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS3DS1TestBytesRx 1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.8
This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS3DS1TestFrmRx 1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.9
This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS3DS1TestErroredFrmRx 1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.10
This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS3DS1TestBitErrorRate 1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.11
This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
OBJECT-TYPE    
  AsciiString SIZE(5)  

mscLpDS3DS1ProvTable 1.3.6.1.4.1.562.36.2.1.12.5.6.10
This group contains all of the provisioning data for a DS1 component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1ProvEntry

mscLpDS3DS1ProvEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.10.1
An entry in the mscLpDS3DS1ProvTable.
OBJECT-TYPE    
  MscLpDS3DS1ProvEntry  

mscLpDS3DS1LineType 1.3.6.1.4.1.562.36.2.1.12.5.6.10.1.1
This attribute defines the framing of the DS1 tributary. d4 defines a framing pattern of 12 frames per multiframe. esf defines a framing pattern of 24 frames per multiframe. d4Cas defines a framing pattern of 12 frames per multiframe with channel associated signalling. esfCas defines a framing pattern of 24 frames per multiframe with channel associated signalling. For the 4pDS3ChAtm card, only d4 and esf framing patterns are permitted.
OBJECT-TYPE    
  INTEGER d4(0), esf(1), d4Cas(4), esfCas(5)  

mscLpDS3DS1ZeroCoding 1.3.6.1.4.1.562.36.2.1.12.5.6.10.1.2
This attribute defines the zero encoding on the DS1 tributary. bit7Stuffing sets bit 7 of every timeslot to a one to guarantee ones's density. This reduces the available bandwidth of the channel by 1/8. none does no zero encoding.
OBJECT-TYPE    
  INTEGER bit7Stuffing(0), none(3)  

mscLpDS3DS1ClockingSource 1.3.6.1.4.1.562.36.2.1.12.5.6.10.1.3
This attribute defines the source of the transmit clock for the DS1 tributary. When the clocking source is selected from local, the crystal on the port generates the clocking for the DS1 tributary. When the clocking source is selected from line, the port synchronizes to the clock from the DS1 tributary. When the clocking source is selected from module, the ports clock synchronizes to the clock provided by the oscillator on the active CP. On a 1pDS3C card, if the NetworkSynchronization (NS) component is present the default value of this attribute will be module otherwise it will be line. On a 2pDS3cAal or 4pDS3ChAtm card, the only valid values are local and module. If the NS component is present the default value of this attribute will be module otherwise it will be local. On a 4pDS3ChAtm card the clocking source for all DS1 and all DS3 components on card must be the same, except when a DS1 is using line as a clocking source.
OBJECT-TYPE    
  INTEGER local(0), line(1), module(2)  

mscLpDS3DS1CidDataTable 1.3.6.1.4.1.562.36.2.1.12.5.6.11
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1CidDataEntry

mscLpDS3DS1CidDataEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.11.1
An entry in the mscLpDS3DS1CidDataTable.
OBJECT-TYPE    
  MscLpDS3DS1CidDataEntry  

mscLpDS3DS1CustomerIdentifier 1.3.6.1.4.1.562.36.2.1.12.5.6.11.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

mscLpDS3DS1AdminInfoTable 1.3.6.1.4.1.562.36.2.1.12.5.6.12
This group contains the attributes pertaining to the vendor of the equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1AdminInfoEntry

mscLpDS3DS1AdminInfoEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.12.1
An entry in the mscLpDS3DS1AdminInfoTable.
OBJECT-TYPE    
  MscLpDS3DS1AdminInfoEntry  

mscLpDS3DS1Vendor 1.3.6.1.4.1.562.36.2.1.12.5.6.12.1.1
This is the name of the vendor supplying the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..20)  

mscLpDS3DS1CommentText 1.3.6.1.4.1.562.36.2.1.12.5.6.12.1.2
Any miscellaneous text about the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..60)  

mscLpDS3DS1IfEntryTable 1.3.6.1.4.1.562.36.2.1.12.5.6.13
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1IfEntryEntry

mscLpDS3DS1IfEntryEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.13.1
An entry in the mscLpDS3DS1IfEntryTable.
OBJECT-TYPE    
  MscLpDS3DS1IfEntryEntry  

mscLpDS3DS1IfAdminStatus 1.3.6.1.4.1.562.36.2.1.12.5.6.13.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpDS3DS1IfIndex 1.3.6.1.4.1.562.36.2.1.12.5.6.13.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscLpDS3DS1OperStatusTable 1.3.6.1.4.1.562.36.2.1.12.5.6.14
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1OperStatusEntry

mscLpDS3DS1OperStatusEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.14.1
An entry in the mscLpDS3DS1OperStatusTable.
OBJECT-TYPE    
  MscLpDS3DS1OperStatusEntry  

mscLpDS3DS1SnmpOperStatus 1.3.6.1.4.1.562.36.2.1.12.5.6.14.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpDS3DS1StateTable 1.3.6.1.4.1.562.36.2.1.12.5.6.15
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1StateEntry

mscLpDS3DS1StateEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.15.1
An entry in the mscLpDS3DS1StateTable.
OBJECT-TYPE    
  MscLpDS3DS1StateEntry  

mscLpDS3DS1AdminState 1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscLpDS3DS1OperationalState 1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpDS3DS1UsageState 1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscLpDS3DS1AvailabilityStatus 1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

mscLpDS3DS1ProceduralStatus 1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpDS3DS1ControlStatus 1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpDS3DS1AlarmStatus 1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpDS3DS1StandbyStatus 1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

mscLpDS3DS1UnknownStatus 1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

mscLpDS3DS1OperTable 1.3.6.1.4.1.562.36.2.1.12.5.6.16
This group contains the common operational data for a component in a digital hierarchy interface.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1OperEntry

mscLpDS3DS1OperEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.16.1
An entry in the mscLpDS3DS1OperTable.
OBJECT-TYPE    
  MscLpDS3DS1OperEntry  

mscLpDS3DS1RxAisAlarm 1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.1
This attribute indicates whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/- 0.5 seconds. An AIS defect is detected after having received less than 3 zeros in a 2048 bit period. If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. This tributary goes into an operationalState of disabled for the duration of an AIS alarm state. The AIS alarm state is cleared when AIS defects are absent for 10 seconds +/- 0.5 seconds.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpDS3DS1LofAlarm 1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.2
This attribute indicates whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defects (2 out of 5 framing bits in error ) have been detected for 3 seconds +/- 0.5 seconds. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. This tributary goes into an operationalState of disabled until the LOF alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOF alarm state The condition is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpDS3DS1RxRaiAlarm 1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.3
This attribute indicates whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered when the RAI defect indicator has been observed and accumulated for 3.5 seconds +/- 0.5 seconds. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/ 10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The RAI alarm state is cleared when the RAI defect indicator has been absent for 10 seconds +/- 0.5 seconds. The RAI alarm is usually an indication that the far end facility is unable to gain synchronization.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpDS3DS1TxAisAlarm 1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.4
This attribute indicates whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transmitted when the tributary is in a locked state.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpDS3DS1TxRaiAlarm 1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.5
This attribute indicates whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the tributary detects a LOF alarm condition.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpDS3DS1StatsTable 1.3.6.1.4.1.562.36.2.1.12.5.6.17
This group contains the common statistical data for a component in a digital hierarchy interface.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3DS1StatsEntry

mscLpDS3DS1StatsEntry 1.3.6.1.4.1.562.36.2.1.12.5.6.17.1
An entry in the mscLpDS3DS1StatsTable.
OBJECT-TYPE    
  MscLpDS3DS1StatsEntry  

mscLpDS3DS1RunningTime 1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.1
This attribute counts the number of seconds since the tributary was activated.
OBJECT-TYPE    
  Counter32  

mscLpDS3DS1ErrorFreeSec 1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.2
This attribute counts the number of seconds that the tributary has been in an error free state.
OBJECT-TYPE    
  Counter32  

mscLpDS3DS1ErroredSec 1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.3
This attribute counts the number of errored seconds the tributary has counted since it was activated. An errored second is declared when a second with one or more Code Violation Error events, or one or more Out Of Frame events occurs. A code violation error may be a CRC error or a BPV error. An Out Of Frame event occurs when 2 out of 5 framing bits are in error.
OBJECT-TYPE    
  Counter32  

mscLpDS3DS1SevErroredSec 1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.4
This attribute counts the number of severely errored seconds the tributary has counted since it was activated. A severely errored second occurs when a second with 320 or more Code Violation Error events or one or more Out Of Frame events occurs.
OBJECT-TYPE    
  Counter32  

mscLpDS3DS1SevErroredFrmSec 1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.5
This attribute counts the number of severely errored framing seconds the tributary has counted since it was activated A severely errored framing second occurs when a second with one or more Out Of Frame events occurs.
OBJECT-TYPE    
  Counter32  

mscLpDS3DS1UnavailSec 1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.6
This attribute counts the total number of seconds that the tributary has been in an unavailable signal state. An unavailable signal state occurs at the onset of 10 consecutive Severely Errored Seconds. The state is cleared at the onset of 10 seconds with no Severely Errored Seconds.
OBJECT-TYPE    
  Counter32  

mscLpDS3DS1CrcErrors 1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.7
This attribute counts the total number of CRC-6 errors. These will only be counted when the lineType is esf.
OBJECT-TYPE    
  Counter32  

mscLpDS3DS1FrmErrors 1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.8
This attribute counts the total number of frame errors. A frame error is an error in the framing bits.
OBJECT-TYPE    
  Counter32  

mscLpDS3DS1SlipErrors 1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.9
The total number of times that the line experienced a controlled frame slip.
OBJECT-TYPE    
  Counter32  

mscLpDS3ProvTable 1.3.6.1.4.1.562.36.2.1.12.5.10
This group contains all of the provisioning data for a DS3 component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3ProvEntry

mscLpDS3ProvEntry 1.3.6.1.4.1.562.36.2.1.12.5.10.1
An entry in the mscLpDS3ProvTable.
OBJECT-TYPE    
  MscLpDS3ProvEntry  

mscLpDS3CbitParity 1.3.6.1.4.1.562.36.2.1.12.5.10.1.1
This attribute indicates if C-Bit parity has been turned ON or OFF. The CBIT component will appear under the DS3 component when the cbitParity attribute is set to on.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscLpDS3LineLength 1.3.6.1.4.1.562.36.2.1.12.5.10.1.2
This attribute defines the line length for equalization calculations for the DS3 line. The range is between 0 and 450 feet (1 metre = 3.28 feet). Note: There are currently only two ranges as far as the equalization calculation performed on the FP is concerned: 0 to 224ft and 225 to 450ft.
OBJECT-TYPE    
  Unsigned32 0..450  

mscLpDS3ClockingSource 1.3.6.1.4.1.562.36.2.1.12.5.10.1.3
This attribute defines the type of clocking source used for synchronizing the DS3 transmit clock: local means direct use of the local clock oscillator at its centre frequency; line means use of a signal phase-locked to the incoming DS3 line rate; module means the use of a signal phase-locked to the CP reference clock. Note that the multiport cell-based cards have one common clock source for all ports. For this reason, the following rules apply for the value of clockingSource across the board's three ports: All three clockingSource values must be 'local' OR All three clockingSource values must be 'module' OR One clockingSource value must be 'line' and the other two must be 'otherPort'. If there is no NS component provisioned, the default value for this attribute will be local. If the NS component has been provisioned, the default value is module, except for the 1pDS3C cards. For the 1pDS3C cards, the default and only valid value for this attribute is local. The clockingSource of the DS1 sub-component becomes the effective clocking source for this attribute. All the DS1 sub-components have the same clocking source.
OBJECT-TYPE    
  INTEGER local(0), line(1), module(2), otherPort(4)  

mscLpDS3ApplicationFramerName 1.3.6.1.4.1.562.36.2.1.12.5.10.1.4
This attribute defines the link to the software stack. It defines which application is running on top of the DS3 component.
OBJECT-TYPE    
  Link  

mscLpDS3Mapping 1.3.6.1.4.1.562.36.2.1.12.5.10.1.5
This attribute indicates if ATM cells will be mapped directly into the DS3 payload, or whether PLCP mapping will be used. The PLCP component will appear under the DS3 component when this attribute is set to plcp. This attribute will be ignored when set on frame-based cards.
OBJECT-TYPE    
  INTEGER direct(0), plcp(1)  

mscLpDS3CidDataTable 1.3.6.1.4.1.562.36.2.1.12.5.11
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3CidDataEntry

mscLpDS3CidDataEntry 1.3.6.1.4.1.562.36.2.1.12.5.11.1
An entry in the mscLpDS3CidDataTable.
OBJECT-TYPE    
  MscLpDS3CidDataEntry  

mscLpDS3CustomerIdentifier 1.3.6.1.4.1.562.36.2.1.12.5.11.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

mscLpDS3AdminInfoTable 1.3.6.1.4.1.562.36.2.1.12.5.12
This group contains the attributes pertaining to the vendor of the equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3AdminInfoEntry

mscLpDS3AdminInfoEntry 1.3.6.1.4.1.562.36.2.1.12.5.12.1
An entry in the mscLpDS3AdminInfoTable.
OBJECT-TYPE    
  MscLpDS3AdminInfoEntry  

mscLpDS3Vendor 1.3.6.1.4.1.562.36.2.1.12.5.12.1.1
This is the name of the vendor supplying the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..20)  

mscLpDS3CommentText 1.3.6.1.4.1.562.36.2.1.12.5.12.1.2
Any miscellaneous text about the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..60)  

mscLpDS3IfEntryTable 1.3.6.1.4.1.562.36.2.1.12.5.13
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3IfEntryEntry

mscLpDS3IfEntryEntry 1.3.6.1.4.1.562.36.2.1.12.5.13.1
An entry in the mscLpDS3IfEntryTable.
OBJECT-TYPE    
  MscLpDS3IfEntryEntry  

mscLpDS3IfAdminStatus 1.3.6.1.4.1.562.36.2.1.12.5.13.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpDS3IfIndex 1.3.6.1.4.1.562.36.2.1.12.5.13.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscLpDS3OperStatusTable 1.3.6.1.4.1.562.36.2.1.12.5.14
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3OperStatusEntry

mscLpDS3OperStatusEntry 1.3.6.1.4.1.562.36.2.1.12.5.14.1
An entry in the mscLpDS3OperStatusTable.
OBJECT-TYPE    
  MscLpDS3OperStatusEntry  

mscLpDS3SnmpOperStatus 1.3.6.1.4.1.562.36.2.1.12.5.14.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpDS3StateTable 1.3.6.1.4.1.562.36.2.1.12.5.15
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3StateEntry

mscLpDS3StateEntry 1.3.6.1.4.1.562.36.2.1.12.5.15.1
An entry in the mscLpDS3StateTable.
OBJECT-TYPE    
  MscLpDS3StateEntry  

mscLpDS3AdminState 1.3.6.1.4.1.562.36.2.1.12.5.15.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscLpDS3OperationalState 1.3.6.1.4.1.562.36.2.1.12.5.15.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpDS3UsageState 1.3.6.1.4.1.562.36.2.1.12.5.15.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscLpDS3AvailabilityStatus 1.3.6.1.4.1.562.36.2.1.12.5.15.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

mscLpDS3ProceduralStatus 1.3.6.1.4.1.562.36.2.1.12.5.15.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpDS3ControlStatus 1.3.6.1.4.1.562.36.2.1.12.5.15.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpDS3AlarmStatus 1.3.6.1.4.1.562.36.2.1.12.5.15.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpDS3StandbyStatus 1.3.6.1.4.1.562.36.2.1.12.5.15.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

mscLpDS3UnknownStatus 1.3.6.1.4.1.562.36.2.1.12.5.15.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

mscLpDS3OperTable 1.3.6.1.4.1.562.36.2.1.12.5.16
This group contains the common operational data for DS3 component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3OperEntry

mscLpDS3OperEntry 1.3.6.1.4.1.562.36.2.1.12.5.16.1
An entry in the mscLpDS3OperTable.
OBJECT-TYPE    
  MscLpDS3OperEntry  

mscLpDS3LosAlarm 1.3.6.1.4.1.562.36.2.1.12.5.16.1.1
This attribute displays whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOS defect is detected at the DS3 line interface upon observing 175 +/- 75 continuous pulse positions with no pulses of either positive or negative polarity. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the LOS alarm condition is cleared. The LOS alarm state is cleared after LOS defects have been absent for a period of 10 seconds +/- 0.5 seconds. The losAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpDS3LofAlarm 1.3.6.1.4.1.562.36.2.1.12.5.16.1.2
This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when Severely Errored Frame (SEF) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. A SEF defect is detected when 3 (or more) out of 16 (or fewer) F-bits are in error, or one (or more) M-bits in two (or more) out of four (or fewer) consecutive M-frames are in error. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the LOF alarm condition is cleared. The condition is cleared when framing has been achieved for a period of 10 seconds +/- 0.5 seconds. As long as SEF defects are detected, the node also transmits the far-end SEF/AIS defect indicator over the outgoing line. When not running in C-Bit Parity mode, the txRai attribute is also set to on when transmitting the far-end SEF/AIS defect indicator on the outgoing line. The lofAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpDS3RxAisAlarm 1.3.6.1.4.1.562.36.2.1.12.5.16.1.3
This attribute displays whether an Alarm Indication Signal (AIS) alarm state has been entered. An AIS alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/ - 0.5 seconds. An AIS defect is the occurrence of AIS (valid DS3 frame with payload containing the 1010...sequence and with C-Bits set to zero) in contiguous M-frames for a time greater than 100 milliseconds. If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the AIS alarm condition is cleared (after AIS has been no longer detected for a period of 10 seconds +/- 0.5 seconds). As long as AIS is detected, the node also transmits the far-end SEF/AIS defect indicator over the outgoing line. When not running in C-Bit Parity mode, the txRai attribute is also set to on when transmitting the far- end SEF/AIS defect indicator on the outgoing line. The rxAisAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpDS3RxRaiAlarm 1.3.6.1.4.1.562.36.2.1.12.5.16.1.4
This attribute displays whether a Remote Alarm Indication (RAI) alarm state has been entered. When not running the C-Bit Parity mode, the RAI alarm state is entered when the far-end SEF/AIS defect indicator has been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds on the incoming DS3 line. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the RAI alarm condition is cleared. The condition is cleared when the far-end SEF/AIS defect indicator has not been detected for 10 seconds +/- 0.5 seconds. When running the C-Bit Parity mode, the RAI alarm state is entered upon detection of a far-end alarm over the Far-End Alarm and Control (FEAC) channel. The RAI alarm state is exited as soon as no more far-end alarm is detected on the FEAC channel. The far- end alarms that can be detected on the FEAC channel and that cause the RAI alarm state to be entered are: equipment failure alarm (service affecting), LOS alarm, LOF alarm, idle and AIS alarm. The rxRaiAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpDS3RxIdle 1.3.6.1.4.1.562.36.2.1.12.5.16.1.5
This attribute displays whether an Idle failure condition has been reported on the DS3 port. An Idle condition is reported when DS3 Idle defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The DS3 Idle defect is the occurrence of a valid DS3 frame with the information bits set to a 11001100.. sequence. If the DS3 Idle defects are intermittently occurring, the DS3 Idle defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the Idle failure condition is cleared. The failure condition is cleared when the DS3 idle pattern has not been detected for at least 10 seconds +/- 0.5 seconds. The rxIdle attribute is always set to off when the component has been locked and left offline. The idle pattern indicates that the far-end is physically connected but not put in service. For instance, DS3 idle is transmitted on the outgoing line when the DS3 component is locked and not used for operational testing.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpDS3TxAis 1.3.6.1.4.1.562.36.2.1.12.5.16.1.6
This attribute displays whether an Alarm Indication Signal (AIS) alarm is being transmitted on the DS3 line. Currently, AIS is never transmitted by a Passport DS3 node.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpDS3TxRai 1.3.6.1.4.1.562.36.2.1.12.5.16.1.7
When not running C-Bit Parity mode, this attribute displays whether the far-end SEF/AIS defect indicator is transmitted over the outgoing line when the DS3 component has been unlocked or used in operational testing. When running in C-Bit Parity mode, this attribute displays whether a far-end alarm is sent over the Far-End Alarm and Control (FEAC) channel when the DS3 component has been unlocked or used in operational testing. When the DS3 component is locked and not used in operational testing, this attribute is always set to off.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpDS3TxIdle 1.3.6.1.4.1.562.36.2.1.12.5.16.1.8
This attribute displays whether the DS3 Idle signal is transmitted over the outgoing line. DS3 Idle is sent when the DS3 component has been locked and not used in operational testing.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpDS3StatsTable 1.3.6.1.4.1.562.36.2.1.12.5.17
This group contains the specific DS3 common operational data for a DS3 component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS3StatsEntry

mscLpDS3StatsEntry 1.3.6.1.4.1.562.36.2.1.12.5.17.1
An entry in the mscLpDS3StatsTable.
OBJECT-TYPE    
  MscLpDS3StatsEntry  

mscLpDS3RunningTime 1.3.6.1.4.1.562.36.2.1.12.5.17.1.1
This attribute indicates the total number of seconds since the DS3 component has been activated and been in unlocked state or used for operational testing. All the other error counts that follow as well as each DS3 subcomponent's error counts can be updated when this count is active.
OBJECT-TYPE    
  Counter32  

mscLpDS3ErrorFreeSec 1.3.6.1.4.1.562.36.2.1.12.5.17.1.2
This attribute indicates the number of seconds that the DS3 port has been in an error free state.
OBJECT-TYPE    
  Counter32  

mscLpDS3LineCodeViolations 1.3.6.1.4.1.562.36.2.1.12.5.17.1.3
This attribute indicates the total number of Line Code Violations (LCV) detected. A DS3 Line Code Violation is a B3Zs error. LCV counting is inhibited for second intervals where Line Severely Errored Second (LSES) is counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  Counter32  

mscLpDS3LineErroredSec 1.3.6.1.4.1.562.36.2.1.12.5.17.1.4
This attribute indicates the total number of Line Errored Seconds (LES) that have been counted. A LES is declared for second intervals containing one or more LCV or one or more Loss Of Signal (LOS) defects.
OBJECT-TYPE    
  Counter32  

mscLpDS3LineSevErroredSec 1.3.6.1.4.1.562.36.2.1.12.5.17.1.5
This attribute indicates the total number of Line Severely Errored Seconds (LSES) that have been counted. A LSES is declared for second intervals containing more than 44 LCVs or one or more LOS defects.
OBJECT-TYPE    
  Counter32  

mscLpDS3LineLosSec 1.3.6.1.4.1.562.36.2.1.12.5.17.1.6
This attribute indicates the total number of Line LOS Seconds (LOSS) that have been counted. A LOSS is declared for second intervals containing one or more LOS defects.
OBJECT-TYPE    
  Counter32  

mscLpDS3LineFailures 1.3.6.1.4.1.562.36.2.1.12.5.17.1.7
This attribute indicates the total number of times that a line failure (LOS failure) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  Counter32  

mscLpDS3PathCodeViolations 1.3.6.1.4.1.562.36.2.1.12.5.17.1.8
This attribute indicates the total number of Path Code Violations (PCVs) detected. Each PCV corresponds to a P-bit parity error, or possibly a frame error or a disagreement between P-bits or X-bits. PCV counting is inhibited over second intervals where a Path Severely Errored Second (PSES) is counted. Counting of PCVs is also inhibited over second intervals where a Path Unavailable Second (PUAS) is counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  Counter32  

mscLpDS3PathErroredSec 1.3.6.1.4.1.562.36.2.1.12.5.17.1.9
This attribute indicates the total number of Path Errored Seconds (PESs) that have been counted. A PES is declared for second intervals containing one or more Path Code Violations (PCV) or one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of Path Errored Seconds is inhibited when Path Unavailable Seconds (PUAS) is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

mscLpDS3PathSevErroredSec 1.3.6.1.4.1.562.36.2.1.12.5.17.1.10
This attribute indicates the total number of Path Severely Errored Seconds (PSESs) that have been counted. A PSES is declared for second intervals containing more than 44 PCVs or one or more SEF or AIS defects. Counting of PSESs is inhibited when Path Unavailable Seconds (PUAS) is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

mscLpDS3PathSefAisSec 1.3.6.1.4.1.562.36.2.1.12.5.17.1.11
This attribute indicates the total number of SEF/AIS Seconds (PSASs). A PSAS is declared for second intervals containing one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of PSAS is inhibited when Path Unavailable Seconds (PUAS) is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

mscLpDS3PathUnavailSec 1.3.6.1.4.1.562.36.2.1.12.5.17.1.12
This attribute indicates the total number of one second intervals for which the DS3 path is unavailable. The DS3 path becomes unavailable at the onset of 10 consecutive Path Severely Errored Seconds (PSES). The 10 PSESs are included in the unavailable time. Once unavailable, the DS3 path becomes available at the onset of 10 contiguous seconds with no PSES. The 10 seconds with no PSES are excluded from the unavailable time. For second intervals where PUAS is counted, counting of Path Coding Violations (PCV), Path Errored Seconds (PES), Path Severely Errored Seconds (PSES) and Path Sef/Ais Seconds (PSAS) is inhibited.
OBJECT-TYPE    
  Counter32  

mscLpDS3PathFailures 1.3.6.1.4.1.562.36.2.1.12.5.17.1.13
This attribute indicates the total number of times that a path failure (LOF/AIS failure) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  Counter32  

mscLpE3 1.3.6.1.4.1.562.36.2.1.12.6
OBJECT IDENTIFIER    

mscLpE3RowStatusTable 1.3.6.1.4.1.562.36.2.1.12.6.1
This entry controls the addition and deletion of mscLpE3 components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE3RowStatusEntry

mscLpE3RowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.6.1.1
A single entry in the table represents a single mscLpE3 component.
OBJECT-TYPE    
  MscLpE3RowStatusEntry  

mscLpE3RowStatus 1.3.6.1.4.1.562.36.2.1.12.6.1.1.1
This variable is used as the basis for SNMP naming of mscLpE3 components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscLpE3ComponentName 1.3.6.1.4.1.562.36.2.1.12.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpE3StorageType 1.3.6.1.4.1.562.36.2.1.12.6.1.1.4
This variable represents the storage type value for the mscLpE3 tables.
OBJECT-TYPE    
  StorageType  

mscLpE3Index 1.3.6.1.4.1.562.36.2.1.12.6.1.1.10
This variable represents the index for the mscLpE3 tables.
OBJECT-TYPE    
  Integer32 0..11  

mscLpE3Test 1.3.6.1.4.1.562.36.2.1.12.6.2
OBJECT IDENTIFIER    

mscLpE3TestRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.6.2.1
This entry controls the addition and deletion of mscLpE3Test components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE3TestRowStatusEntry

mscLpE3TestRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.6.2.1.1
A single entry in the table represents a single mscLpE3Test component.
OBJECT-TYPE    
  MscLpE3TestRowStatusEntry  

mscLpE3TestRowStatus 1.3.6.1.4.1.562.36.2.1.12.6.2.1.1.1
This variable is used as the basis for SNMP naming of mscLpE3Test components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscLpE3TestComponentName 1.3.6.1.4.1.562.36.2.1.12.6.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpE3TestStorageType 1.3.6.1.4.1.562.36.2.1.12.6.2.1.1.4
This variable represents the storage type value for the mscLpE3Test tables.
OBJECT-TYPE    
  StorageType  

mscLpE3TestIndex 1.3.6.1.4.1.562.36.2.1.12.6.2.1.1.10
This variable represents the index for the mscLpE3Test tables.
OBJECT-TYPE    
  NonReplicated  

mscLpE3TestStateTable 1.3.6.1.4.1.562.36.2.1.12.6.2.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE3TestStateEntry

mscLpE3TestStateEntry 1.3.6.1.4.1.562.36.2.1.12.6.2.10.1
An entry in the mscLpE3TestStateTable.
OBJECT-TYPE    
  MscLpE3TestStateEntry  

mscLpE3TestAdminState 1.3.6.1.4.1.562.36.2.1.12.6.2.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscLpE3TestOperationalState 1.3.6.1.4.1.562.36.2.1.12.6.2.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpE3TestUsageState 1.3.6.1.4.1.562.36.2.1.12.6.2.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscLpE3TestSetupTable 1.3.6.1.4.1.562.36.2.1.12.6.2.11
This group contains all of the operational data for a Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE3TestSetupEntry

mscLpE3TestSetupEntry 1.3.6.1.4.1.562.36.2.1.12.6.2.11.1
An entry in the mscLpE3TestSetupTable.
OBJECT-TYPE    
  MscLpE3TestSetupEntry  

mscLpE3TestPurpose 1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.1
This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
OBJECT-TYPE    
  AsciiString SIZE(0..40)  

mscLpE3TestType 1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.2
This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
OBJECT-TYPE    
  INTEGER card(0), manual(1), localLoop(2), remoteLoop(3), externalLoop(4), payloadLoop(5), remoteLoopThisTrib(6), v54RemoteLoop(7), pn127RemoteLoop(8)  

mscLpE3TestFrmSize 1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.3
This attribute defines the size of the test data frames in number of bytes.
OBJECT-TYPE    
  Unsigned32 4..4096  

mscLpE3TestFrmPatternType 1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.4
This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
OBJECT-TYPE    
  INTEGER ccitt32kBitPattern(0), ccitt8MBitPattern(1), customizedPattern(2)  

mscLpE3TestCustomizedPattern 1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.5
This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
OBJECT-TYPE    
  Hex 0..4294967295  

mscLpE3TestDataStartDelay 1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.6
This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
OBJECT-TYPE    
  Unsigned32 0..1814400  

mscLpE3TestDisplayInterval 1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.7
This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
OBJECT-TYPE    
  Unsigned32 0..30240  

mscLpE3TestDuration 1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.8
This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
OBJECT-TYPE    
  Unsigned32 1..30240  

mscLpE3TestResultsTable 1.3.6.1.4.1.562.36.2.1.12.6.2.12
This group contains all the statistics related attributes of the Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE3TestResultsEntry

mscLpE3TestResultsEntry 1.3.6.1.4.1.562.36.2.1.12.6.2.12.1
An entry in the mscLpE3TestResultsTable.
OBJECT-TYPE    
  MscLpE3TestResultsEntry  

mscLpE3TestElapsedTime 1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.1
This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
OBJECT-TYPE    
  Counter32  

mscLpE3TestTimeRemaining 1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.2
This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscLpE3TestCauseOfTermination 1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.3
This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4), hardwareReconfigured(5), loopCodeSyncFailed(6), patternSyncFailed(7), patternSyncLost(8)  

mscLpE3TestBitsTx 1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.4
This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpE3TestBytesTx 1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.5
This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpE3TestFrmTx 1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.6
This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpE3TestBitsRx 1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.7
This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpE3TestBytesRx 1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.8
This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpE3TestFrmRx 1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.9
This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpE3TestErroredFrmRx 1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.10
This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpE3TestBitErrorRate 1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.11
This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
OBJECT-TYPE    
  AsciiString SIZE(5)  

mscLpE3G832 1.3.6.1.4.1.562.36.2.1.12.6.3
OBJECT IDENTIFIER    

mscLpE3G832RowStatusTable 1.3.6.1.4.1.562.36.2.1.12.6.3.1
This entry controls the addition and deletion of mscLpE3G832 components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE3G832RowStatusEntry

mscLpE3G832RowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.6.3.1.1
A single entry in the table represents a single mscLpE3G832 component.
OBJECT-TYPE    
  MscLpE3G832RowStatusEntry  

mscLpE3G832RowStatus 1.3.6.1.4.1.562.36.2.1.12.6.3.1.1.1
This variable is used as the basis for SNMP naming of mscLpE3G832 components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscLpE3G832ComponentName 1.3.6.1.4.1.562.36.2.1.12.6.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpE3G832StorageType 1.3.6.1.4.1.562.36.2.1.12.6.3.1.1.4
This variable represents the storage type value for the mscLpE3G832 tables.
OBJECT-TYPE    
  StorageType  

mscLpE3G832Index 1.3.6.1.4.1.562.36.2.1.12.6.3.1.1.10
This variable represents the index for the mscLpE3G832 tables.
OBJECT-TYPE    
  NonReplicated  

mscLpE3G832ProvisionedTable 1.3.6.1.4.1.562.36.2.1.12.6.3.10
This group contains the provisionable data for the G832 component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE3G832ProvisionedEntry

mscLpE3G832ProvisionedEntry 1.3.6.1.4.1.562.36.2.1.12.6.3.10.1
An entry in the mscLpE3G832ProvisionedTable.
OBJECT-TYPE    
  MscLpE3G832ProvisionedEntry  

mscLpE3G832TrailTraceTransmitted 1.3.6.1.4.1.562.36.2.1.12.6.3.10.1.1
This attribute indicates the E.164 address which is to be encoded in the trail access point identifier, which is transmitted using the Trail Trace (TR) field of the transmitted E3 Frame. Both the expected trail access point identifier and the transmitted trail access point identifier are provisionable attributes of the G832 component. The 16 byte Trail Trace frame is composed of one byte containing a frame start marker and a CRC-7 calculation over the previous frame, and 15 bytes for transporting an E.164 address. If less than the full 15 bytes are used, the address is padded with NULL characters.
OBJECT-TYPE    
  AsciiString SIZE(0..15)  

mscLpE3G832TrailTraceExpected 1.3.6.1.4.1.562.36.2.1.12.6.3.10.1.2
This attribute indicates the E.164 address which is expected in the trail access point identifier, which is transmitted using the Trail Trace (TR) field of the transmitted E3 Frame. Both the expected trail access point identifier and the transmitted trail access point identifier are provisionable attributes of the G832 component. The 16 byte Trail Trace frame is composed of one byte containing a frame start marker and a CRC-7 calculation over the previous frame, and 15 bytes for transporting an E.164 address. If less than the full 15 bytes are used, the address is padded with NULL characters.
OBJECT-TYPE    
  AsciiString SIZE(0..15)  

mscLpE3G832OperationalTable 1.3.6.1.4.1.562.36.2.1.12.6.3.11
This group contains the operational data for the G832 component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE3G832OperationalEntry

mscLpE3G832OperationalEntry 1.3.6.1.4.1.562.36.2.1.12.6.3.11.1
An entry in the mscLpE3G832OperationalTable.
OBJECT-TYPE    
  MscLpE3G832OperationalEntry  

mscLpE3G832UnexpectedPayloadType 1.3.6.1.4.1.562.36.2.1.12.6.3.11.1.1
This attribute displays whether the Unexpected Payload Type (UPT) alarm state has been entered. The UPT alarm state is entered when UPT defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The UPT defect is reported when a received frame fails to agree with the expected Payload Type. If the UPT defects are intermittently occurring, the UPT defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle.. The UPT alarm is cleared when the Payload Type in the received frame agrees with the expected Payload Type for a period of 10 seconds +/- 0.5 seconds. The unexpectedPayloadType attribute is always set to off when the E3 component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpE3G832TrailTraceMismatch 1.3.6.1.4.1.562.36.2.1.12.6.3.11.1.2
This attribute displays whether the Trail Trace Mismatch (TTM) alarm state has been entered. The TTM alarm state is entered when TTM defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The TTM defect is reported when the trail access point identifier contained in the Trail Trace (TR) field in the received frame fails to agree with the expected identifier. If the TTM defects are intermittently occurring, the TTM defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The TTM alarm is cleared when the trail access point identifier in the received frame agrees with the expected identifier for a period of 10 seconds +/- 0.5 seconds. The trailTraceMismatch attribute is always set to off when the E3 component has been locked and left offline. Both the expected trail access identifier and the transmitted trail access identifier are provisionable attributes of the G832 component.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpE3G832TimingMarker 1.3.6.1.4.1.562.36.2.1.12.6.3.11.1.3
Indicates whether or not the timing source at the far-end node is traceable to a Primary Reference Clock. The timingMarker indication is controlled by the timing marker bit in the G832 MA byte. If the received timing marker bit is 1 for five consecutive frames, and five consecutive 0s are not received for two seconds, the timingMarker indication will be set to not traceable. If the received timing marker bit is 0 for five consecutive frames and five consecutive 1s are not received for two seconds, the timingMarker indication will be set to traceable.
OBJECT-TYPE    
  INTEGER notTraceable(0), traceable(1)  

mscLpE3G832TrailTraceReceived 1.3.6.1.4.1.562.36.2.1.12.6.3.11.1.4
This attribute indicates the 15 byte E.164 address which is currently being received in the trail trace (TR) field of the E3 G832 frame. If this attribute differs from the provisioned trailTraceTransmitted string a trail trace mismatch (TTM) defect is reported, possibly resulting in a TTM alarm, as described for operational attribute trailTraceMismatch.
OBJECT-TYPE    
  AsciiString SIZE(0..15)  

mscLpE3G832StatsTable 1.3.6.1.4.1.562.36.2.1.12.6.3.12
This group contains the statistical data for the G832 component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE3G832StatsEntry

mscLpE3G832StatsEntry 1.3.6.1.4.1.562.36.2.1.12.6.3.12.1
An entry in the mscLpE3G832StatsTable.
OBJECT-TYPE    
  MscLpE3G832StatsEntry  

mscLpE3G832FarEndErrorFreeSec 1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.1
This attribute indicates the number of seconds that the E3 line has not suffered any G832 errors.
OBJECT-TYPE    
  Counter32  

mscLpE3G832FarEndCodeViolations 1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.2
A count of E3 frames containing a Far-End Block Error (FEBE). A FEBE is reported over the FEBE bit each time the far-end terminal detects a BIP-8 error in a received E3 frame. For second intervals where Far End Unavailable Seconds (FEUAS) or Far End Severely Errored Seconds (FESES) are counted, counting of FECVs is inhibited. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  Counter32  

mscLpE3G832FarEndErroredSec 1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.3
This attribute indicates the total number of Far-End Errored Seconds (FEES). A FEES is declared for second intervals containing with one or more Far-End Coding Violations (FECV) or one or more Far-End Receive Failure (FERF) defects. A FERF defect occurs when the FERF bit in the received frame is set to one. For second intervals where Far End Unavailable Seconds (FEUAS) are counted, counting of FEESs is inhibited.
OBJECT-TYPE    
  Counter32  

mscLpE3G832FarEndSevErroredSec 1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.4
This attribute indicates the total number of Far-End Severely Errored Seconds (FESESs). A FESES is declared for second intervals containing more than 34 Far-End Coding Violations (FECV) or one or more Far-End Receive Failure (FERF) defects. For second intervals where a Far-End Severely Errored Seconds (FESES) is counted, counting of FECVs is inhibited. For second intervals where Far End Unavailable Seconds (FEUAS) are counted, counting of FESESs is inhibited.
OBJECT-TYPE    
  Counter32  

mscLpE3G832FarEndSefAisSec 1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.5
This attribute indicates the total number of Far-End SEF/AIS Seconds (FESAS). A FESAS is declared for second intervals containing one or more Far-End Receive Failure (FERF) defects. For second intervals where Far End Unavailable Seconds (FEUAS) are counted, counting of FESAS is inhibited.
OBJECT-TYPE    
  Counter32  

mscLpE3G832FarEndUnavailSec 1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.6
This attribute indicates the total number of one second intervals for which the E3 far-end path is unavailable. The E3 far-end path becomes unavailable at the onset of 10 consecutive Far End Severely Errored Seconds (FESES). It comes available at the onset of 10 contiguous seconds with no FESES. The unavailable time includes the initial 10 seconds to enter the unavailable state but not the 10 seconds to exit the state For second intervals where FEUAS is counted, counting of Far End Coding Violations (FECV), Far- End Errored Seconds (FEES), Far-End Severely Errored Seconds (FESES) and Far-End SefAis Seconds (FESAS) are inhibited.
OBJECT-TYPE    
  Counter32  

mscLpE3Plcp 1.3.6.1.4.1.562.36.2.1.12.6.4
OBJECT IDENTIFIER    

mscLpE3PlcpRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.6.4.1
This entry controls the addition and deletion of mscLpE3Plcp components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE3PlcpRowStatusEntry

mscLpE3PlcpRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.6.4.1.1
A single entry in the table represents a single mscLpE3Plcp component.
OBJECT-TYPE    
  MscLpE3PlcpRowStatusEntry  

mscLpE3PlcpRowStatus 1.3.6.1.4.1.562.36.2.1.12.6.4.1.1.1
This variable is used as the basis for SNMP naming of mscLpE3Plcp components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscLpE3PlcpComponentName 1.3.6.1.4.1.562.36.2.1.12.6.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpE3PlcpStorageType 1.3.6.1.4.1.562.36.2.1.12.6.4.1.1.4
This variable represents the storage type value for the mscLpE3Plcp tables.
OBJECT-TYPE    
  StorageType  

mscLpE3PlcpIndex 1.3.6.1.4.1.562.36.2.1.12.6.4.1.1.10
This variable represents the index for the mscLpE3Plcp tables.
OBJECT-TYPE    
  NonReplicated  

mscLpE3PlcpOperationalTable 1.3.6.1.4.1.562.36.2.1.12.6.4.10
This group contains the operational data for the PLCP component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE3PlcpOperationalEntry

mscLpE3PlcpOperationalEntry 1.3.6.1.4.1.562.36.2.1.12.6.4.10.1
An entry in the mscLpE3PlcpOperationalTable.
OBJECT-TYPE    
  MscLpE3PlcpOperationalEntry  

mscLpE3PlcpLofAlarm 1.3.6.1.4.1.562.36.2.1.12.6.4.10.1.1
This attribute displays whether a PLCP Loss Of Frame (LOF) failure alarm state has been entered. An LOF failure is declared when a PLCP LOF defect persists for 2.5 s +/- 0.5 s. An LOF defect occurs when an OOF (Out of Frame) state persists for more than 1 ms. If the OOF events are intermittent, the LOF defect counter is decremented at a rate of 1/12 (for DS3 PLCP) or 1/9 (for G.751 E3 PLCP) of the incrementing rate, with all measurements based on a 200 ms polling cycle. An OOF event (also known as a PLCP SEF event) is declared when an error is detected in both the A1 and A2 octets, or when two consecutive POHIDs are found in error. OOF is removed when two valid sets of framing octets and two valid and sequential POHID octets have been found. The LOF defect is removed when the defect counter reaches zero, i.e. when OOF events are absent for more than 12 ms (DS3 PLCP) or 9 ms (G.751 E3 PLCP). LOF failure alarm is cleared when LOF defect is absent for 10.0 s +/- 0.5 s The DS3 or E3 component goes into an operational state of disabled until the LOF failure alarm is cleared. The terminal declaring the LOF failure alarm will transmit a PLCP RAI signal to the far-end for the duration of the alarm. The lofAlarm attribute is always set to off when the DS3 or E3 component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpE3PlcpRxRaiAlarm 1.3.6.1.4.1.562.36.2.1.12.6.4.10.1.2
This attribute displays whether a PLCP Remote Alarm Indication (RAI) failure alarm state has been entered. An RAI failure alarm occurs when ten consecutive PLCP RAI bits (bit 5 in the G1 byte) are high on the incoming line. An RAI failure alarm is cleared when ten consecutive RAI bits are set to 0. Note: Some standards call this alarm RFI. The rxRaiAlarm attribute is always set to off when the DS3 or E3 component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpE3PlcpStatsTable 1.3.6.1.4.1.562.36.2.1.12.6.4.11
This group contains the statistical data for the PLCP component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE3PlcpStatsEntry

mscLpE3PlcpStatsEntry 1.3.6.1.4.1.562.36.2.1.12.6.4.11.1
An entry in the mscLpE3PlcpStatsTable.
OBJECT-TYPE    
  MscLpE3PlcpStatsEntry  

mscLpE3PlcpErrorFreeSec 1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.1
This attribute indicates the number of seconds during which the near-end PLCP path layer had no errors.
OBJECT-TYPE    
  Counter32  

mscLpE3PlcpCodingViolations 1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.2
This attribute indicates the total number of BIP-8 Errors, framing pattern octet errors, and path overhead identification errors detected in received PLCP frames. Counting of PLCP CV is inhibited for second intervals where PLCP Severely Errored Framing Seconds (SEFS) or PLCP Unavailable Seconds (UAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  Counter32  

mscLpE3PlcpErroredSec 1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.3
This attribute indicates the number of seconds containing one or more PLCP Coding Violations (CV) or in which a PLCP Severely Errored Framing Second (SEFS) was counted. Counting of PLCP ES is inhibited during second intervals where PLCP Unavailable Seconds (UAS) are counted.
OBJECT-TYPE    
  Counter32  

mscLpE3PlcpSevErroredSec 1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.4
This attribute indicates the number of seconds containing 5 or more PLCPCVs or in which a PLCPSEFS was counted (i.e. a PLCP OOF event occurred). Counting of PLCP SES is inhibited during second intervals where PLCP Unavailable Seconds (UAS) are counted.
OBJECT-TYPE    
  Counter32  

mscLpE3PlcpSevErroredFramingSec 1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.5
This attribute indicates the number of seconds containing one or more PLCP Severely Errored Frame (SEF) events. An SEF event is equivalent to a PLCP OOF (Out of Frame) event. Counting of PLCPP SEFSs is inhibited for second intervals where PLCP Unavailable Seconds (UAS) are counted.
OBJECT-TYPE    
  Counter32  

mscLpE3PlcpUnavailSec 1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.6
This attribute indicates the number of seconds when the near-end PLCP layer is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP LOF (Loss of Frame) failure alarm state. The PLCP Path Layer becomes available again only after clearing this condition. For second intervals where PLCP UAS are counted, counting of PLCP Severely Errored Framing Seconds (SEFS), PLCP Coding Violations (CV), PLCP Errored Seconds (ES), PLCP Severely Errored Seconds (SES) and PLCP Far-End Severely Errored Seconds (FESES) is inhibited.
OBJECT-TYPE    
  Counter32  

mscLpE3PlcpFarEndErrorFreeSec 1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.7
This attribute indicates the number of seconds during which the far- end PLCP path layer had no errors.
OBJECT-TYPE    
  Counter32  

mscLpE3PlcpFarEndCodingViolations 1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.8
This attribute indicates the total number of PLCP Far-End Block Errors (FEBE) reported by the far-end terminal. Counting of FEBEs is inhibited for second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  Counter32  

mscLpE3PlcpFarEndErroredSec 1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.9
This attribute indicates the number of seconds containing one or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FEES is inhibited during second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted.
OBJECT-TYPE    
  Counter32  

mscLpE3PlcpFarEndSevErroredSec 1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.10
This attribute indicates the number of seconds containing 5 or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FESES is inhibited for second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted.
OBJECT-TYPE    
  Counter32  

mscLpE3PlcpFarEndUnavailableSec 1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.11
This attribute indicates the number of seconds during which the PLCP far end is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP RAI (Remote Alarm Indication). Service becomes available again after this condition is cleared. For second intervals where PLCP FEUAS are counted, counting of PLCP Far-End Coding Violations (FECV), PLCP Far- End Errored Seconds (FEES), and PLCP Far-End Severely Errored Seconds (FESES) is inhibited.
OBJECT-TYPE    
  Counter32  

mscLpE3Cell 1.3.6.1.4.1.562.36.2.1.12.6.5
OBJECT IDENTIFIER    

mscLpE3CellRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.6.5.1
This entry controls the addition and deletion of mscLpE3Cell components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE3CellRowStatusEntry

mscLpE3CellRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.6.5.1.1
A single entry in the table represents a single mscLpE3Cell component.
OBJECT-TYPE    
  MscLpE3CellRowStatusEntry  

mscLpE3CellRowStatus 1.3.6.1.4.1.562.36.2.1.12.6.5.1.1.1
This variable is used as the basis for SNMP naming of mscLpE3Cell components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscLpE3CellComponentName 1.3.6.1.4.1.562.36.2.1.12.6.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpE3CellStorageType 1.3.6.1.4.1.562.36.2.1.12.6.5.1.1.4
This variable represents the storage type value for the mscLpE3Cell tables.
OBJECT-TYPE    
  StorageType  

mscLpE3CellIndex 1.3.6.1.4.1.562.36.2.1.12.6.5.1.1.10
This variable represents the index for the mscLpE3Cell tables.
OBJECT-TYPE    
  NonReplicated  

mscLpE3CellProvTable 1.3.6.1.4.1.562.36.2.1.12.6.5.10
This group contains the provisioning attributes for the AtmCell component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE3CellProvEntry

mscLpE3CellProvEntry 1.3.6.1.4.1.562.36.2.1.12.6.5.10.1
An entry in the mscLpE3CellProvTable.
OBJECT-TYPE    
  MscLpE3CellProvEntry  

mscLpE3CellAlarmActDelay 1.3.6.1.4.1.562.36.2.1.12.6.5.10.1.1
This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
OBJECT-TYPE    
  Unsigned32 0..2000  

mscLpE3CellScrambleCellPayload 1.3.6.1.4.1.562.36.2.1.12.6.5.10.1.2
Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscLpE3CellCorrectSingleBitHeaderErrors 1.3.6.1.4.1.562.36.2.1.12.6.5.10.1.3
This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscLpE3CellOperTable 1.3.6.1.4.1.562.36.2.1.12.6.5.11
This group contains the common operational attributes for the AtmCell component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE3CellOperEntry

mscLpE3CellOperEntry 1.3.6.1.4.1.562.36.2.1.12.6.5.11.1
An entry in the mscLpE3CellOperTable.
OBJECT-TYPE    
  MscLpE3CellOperEntry  

mscLpE3CellLcdAlarm 1.3.6.1.4.1.562.36.2.1.12.6.5.11.1.1
This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpE3CellStatsTable 1.3.6.1.4.1.562.36.2.1.12.6.5.12
This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE3CellStatsEntry

mscLpE3CellStatsEntry 1.3.6.1.4.1.562.36.2.1.12.6.5.12.1
An entry in the mscLpE3CellStatsTable.
OBJECT-TYPE    
  MscLpE3CellStatsEntry  

mscLpE3CellUncorrectableHecErrors 1.3.6.1.4.1.562.36.2.1.12.6.5.12.1.1
This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
OBJECT-TYPE    
  Counter32  

mscLpE3CellSevErroredSec 1.3.6.1.4.1.562.36.2.1.12.6.5.12.1.2
This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
OBJECT-TYPE    
  Counter32  

mscLpE3CellReceiveCellUtilization 1.3.6.1.4.1.562.36.2.1.12.6.5.12.1.3
This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  Gauge32 0..100  

mscLpE3CellTransmitCellUtilization 1.3.6.1.4.1.562.36.2.1.12.6.5.12.1.4
This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  Gauge32 0..100  

mscLpE3CellCorrectableHeaderErrors 1.3.6.1.4.1.562.36.2.1.12.6.5.12.1.5
This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
OBJECT-TYPE    
  Counter32  

mscLpE3ProvTable 1.3.6.1.4.1.562.36.2.1.12.6.10
This group contains all of the provisioning data for a E3 component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE3ProvEntry

mscLpE3ProvEntry 1.3.6.1.4.1.562.36.2.1.12.6.10.1
An entry in the mscLpE3ProvTable.
OBJECT-TYPE    
  MscLpE3ProvEntry  

mscLpE3LineLength 1.3.6.1.4.1.562.36.2.1.12.6.10.1.1
This attribute defines the line length for equalization calculations for the E3 line. The line length range is between 0 and 300 metres (1 metres = 3.28 feet).
OBJECT-TYPE    
  Unsigned32 0..300  

mscLpE3ClockingSource 1.3.6.1.4.1.562.36.2.1.12.6.10.1.2
This attribute defines the type of clocking source used for synchronizing the E3 transmit clock: local means direct use of the local clock oscillator at its centre frequency; line means use of a signal phase-locked to the incoming E3 line rate; module means the use of a signal phase-locked to the CP reference clock. Note that the multiport cell-based cards have one common clock source for each of the three ports. For this reason, the following rules apply for the value of clockingSource across the board's three ports: All three clockingSource values must be 'local' OR All three clockingSource values must be 'module' OR One clockingSource value must be 'line' and the other two must be 'otherPort'. The default value for this attribute will be module if a CP clock is available, and local otherwise.
OBJECT-TYPE    
  INTEGER local(0), line(1), module(2), otherPort(4)  

mscLpE3ApplicationFramerName 1.3.6.1.4.1.562.36.2.1.12.6.10.1.3
This attribute defines the link to the software stack. It defines which application is running on top of the E3 component.
OBJECT-TYPE    
  Link  

mscLpE3Mapping 1.3.6.1.4.1.562.36.2.1.12.6.10.1.4
This attribute indicates if ATM cells will be mapped directly into the E3 payload, or whether PLCP mapping will be used. The PLCP component will appear under the E3 component when this attribute is set to plcp. This attribute will be ignored when set on frame- based cards.
OBJECT-TYPE    
  INTEGER direct(0), plcp(1)  

mscLpE3Framing 1.3.6.1.4.1.562.36.2.1.12.6.10.1.5
This attribute indicates if the framing mode will be in accordance with the CCITT G.751 or G.832 specification. The G832 component will appear under the E3 component when this attribute is set to g832. This attribute may only be set on cell-based card types. Note also that this attribute may only be set to g751 if the mapping attribute is set to plcp. The default value of this attribute will be g751 for frame-based cards, and g832 for cell-based cards. Note: when E3 framing is changed from g832 to g751, the G832 component must be deleted.
OBJECT-TYPE    
  INTEGER g751(0), g832(1)  

mscLpE3LinkAlarmActivationThreshold 1.3.6.1.4.1.562.36.2.1.12.6.10.1.6
This attribute specifies the time interval between the detection of a sustained link failure and the activation of an alarm. It is provisionable for E3 cards.
OBJECT-TYPE    
  Unsigned32 100..2600  

mscLpE3LinkAlarmScanInterval 1.3.6.1.4.1.562.36.2.1.12.6.10.1.7
This attribute specifies the alarm scan timer polling interval. It determines how frequently the status of the link is monitored after a first link error interrupt. It is provisionable for E3 cards.
OBJECT-TYPE    
  Unsigned32 50..250  

mscLpE3CidDataTable 1.3.6.1.4.1.562.36.2.1.12.6.11
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE3CidDataEntry

mscLpE3CidDataEntry 1.3.6.1.4.1.562.36.2.1.12.6.11.1
An entry in the mscLpE3CidDataTable.
OBJECT-TYPE    
  MscLpE3CidDataEntry  

mscLpE3CustomerIdentifier 1.3.6.1.4.1.562.36.2.1.12.6.11.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

mscLpE3AdminInfoTable 1.3.6.1.4.1.562.36.2.1.12.6.12
This group contains the attributes pertaining to the vendor of the equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE3AdminInfoEntry

mscLpE3AdminInfoEntry 1.3.6.1.4.1.562.36.2.1.12.6.12.1
An entry in the mscLpE3AdminInfoTable.
OBJECT-TYPE    
  MscLpE3AdminInfoEntry  

mscLpE3Vendor 1.3.6.1.4.1.562.36.2.1.12.6.12.1.1
This is the name of the vendor supplying the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..20)  

mscLpE3CommentText 1.3.6.1.4.1.562.36.2.1.12.6.12.1.2
Any miscellaneous text about the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..60)  

mscLpE3IfEntryTable 1.3.6.1.4.1.562.36.2.1.12.6.13
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE3IfEntryEntry

mscLpE3IfEntryEntry 1.3.6.1.4.1.562.36.2.1.12.6.13.1
An entry in the mscLpE3IfEntryTable.
OBJECT-TYPE    
  MscLpE3IfEntryEntry  

mscLpE3IfAdminStatus 1.3.6.1.4.1.562.36.2.1.12.6.13.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpE3IfIndex 1.3.6.1.4.1.562.36.2.1.12.6.13.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscLpE3OperStatusTable 1.3.6.1.4.1.562.36.2.1.12.6.14
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE3OperStatusEntry

mscLpE3OperStatusEntry 1.3.6.1.4.1.562.36.2.1.12.6.14.1
An entry in the mscLpE3OperStatusTable.
OBJECT-TYPE    
  MscLpE3OperStatusEntry  

mscLpE3SnmpOperStatus 1.3.6.1.4.1.562.36.2.1.12.6.14.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpE3StateTable 1.3.6.1.4.1.562.36.2.1.12.6.15
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE3StateEntry

mscLpE3StateEntry 1.3.6.1.4.1.562.36.2.1.12.6.15.1
An entry in the mscLpE3StateTable.
OBJECT-TYPE    
  MscLpE3StateEntry  

mscLpE3AdminState 1.3.6.1.4.1.562.36.2.1.12.6.15.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscLpE3OperationalState 1.3.6.1.4.1.562.36.2.1.12.6.15.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpE3UsageState 1.3.6.1.4.1.562.36.2.1.12.6.15.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscLpE3AvailabilityStatus 1.3.6.1.4.1.562.36.2.1.12.6.15.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

mscLpE3ProceduralStatus 1.3.6.1.4.1.562.36.2.1.12.6.15.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpE3ControlStatus 1.3.6.1.4.1.562.36.2.1.12.6.15.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpE3AlarmStatus 1.3.6.1.4.1.562.36.2.1.12.6.15.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpE3StandbyStatus 1.3.6.1.4.1.562.36.2.1.12.6.15.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

mscLpE3UnknownStatus 1.3.6.1.4.1.562.36.2.1.12.6.15.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

mscLpE3OperTable 1.3.6.1.4.1.562.36.2.1.12.6.16
This group contains the common operational data for E3 component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE3OperEntry

mscLpE3OperEntry 1.3.6.1.4.1.562.36.2.1.12.6.16.1
An entry in the mscLpE3OperTable.
OBJECT-TYPE    
  MscLpE3OperEntry  

mscLpE3LosAlarm 1.3.6.1.4.1.562.36.2.1.12.6.16.1.1
This attribute displays whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects has been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOS defect is detected at the E3 line interface upon observing N continuous pulse positions with no pulses of either positive or negative polarity, where N is between 10 and 255. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the LOS alarm condition is cleared. The LOS alarm state is cleared when the LOS defects are absent for a period of 10 seconds +/- 0.5 seconds. The losAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpE3LofAlarm 1.3.6.1.4.1.562.36.2.1.12.6.16.1.2
This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when Severely Errored Frame (SEF) defects have been detected and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An E3 SEF defect is reported after detecting Frame Alignment Signal (FAS) errors on 4 consecutive E3 frames received on the incoming line. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the LOF alarm condition is cleared. The condition is cleared when E3 framing has been achieved for a period of 10 seconds +/- 0.5 seconds. As long as SEF defects are detected, the node also transmits the far-end SEF/AIS (in G.751 E3) or FERF (in G.832) defect indicator over the outgoing line. The txRai attribute is set to on when transmitting the far-end SEF/AIS defect indicator on the outgoing line. The lofAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpE3RxAisAlarm 1.3.6.1.4.1.562.36.2.1.12.6.16.1.3
This attribute displays whether an Alarm Indication Signal (AIS) alarm when state has been entered. An AIS alarm state is entered when AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds on the incoming E3 line. An AIS defect is the occurrence of the AIS (unframed signal with a density of zeros below a certain threshold such as defined by ITU Recommendation G.775). If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/ 10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the AIS alarm condition is cleared (after AIS has been no longer detected for a period of 10 seconds +/- 0.5 seconds). As long as AIS is detected on the incoming line, the node also transmits the far-end SEF/AIS (in G.751 E3) or FERF (in G.832) defect indicator over the outgoing line. The txRai attribute is set to on when transmitting the far-end SEF/AIS defect indicator on the outgoing line. The rxAisAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpE3RxRaiAlarm 1.3.6.1.4.1.562.36.2.1.12.6.16.1.4
This attribute displays whether a Remote Alarm Indication (RAI) alarm state has been entered. A RAI alarm state is entered when far- end SEF/AIS defects (or Far-End Receive Failure (FERF) defects in G.832 E3 Framing mode) have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds on the E3 incoming line. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the RAI alarm condition is cleared. The condition is cleared when the far-end defect indicator has not been detected for 10 seconds +/- 0.5 seconds. The declaration of a RAI Alarm is usually a signal that the far end facility is unable to gain synchronization. The rxRaiAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpE3TxAis 1.3.6.1.4.1.562.36.2.1.12.6.16.1.5
This attribute displays whether an AIS alarm is being transmitted on the E3 line. AIS is transmitted on the outgoing line when the E3 component is locked and not used for operational testing.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpE3TxRai 1.3.6.1.4.1.562.36.2.1.12.6.16.1.6
This attribute displays whether the far-end SEF/AIS defect indicator is transmitted over the outgoing line when the E3 component has been unlocked or used in operational testing. When the E3 component is locked and not used in operational testing, this attribute is always set to off. The far-end SEF/AIS defect indicator is transmitted over the outgoing line when SEF/AIS defects are detected on the incoming line. In G.832 E3 Framing mode, the FERF bit is set to '1' to transmit the SEF/AIS defect indicator.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpE3StatsTable 1.3.6.1.4.1.562.36.2.1.12.6.17
This group contains the common operational data for E3 component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE3StatsEntry

mscLpE3StatsEntry 1.3.6.1.4.1.562.36.2.1.12.6.17.1
An entry in the mscLpE3StatsTable.
OBJECT-TYPE    
  MscLpE3StatsEntry  

mscLpE3RunningTime 1.3.6.1.4.1.562.36.2.1.12.6.17.1.1
This attribute indicates the total number of seconds since the E3 component has been activated and been in unlocked state or used for operational testing. All the other error counts that follow as well as each E3 subcomponent's error counts can be updated when this count is active.
OBJECT-TYPE    
  Counter32  

mscLpE3ErrorFreeSec 1.3.6.1.4.1.562.36.2.1.12.6.17.1.2
This attribute indicates the number of seconds that the E3 port has been in an error free state.
OBJECT-TYPE    
  Counter32  

mscLpE3LineCodeViolations 1.3.6.1.4.1.562.36.2.1.12.6.17.1.3
This attribute indicates the total number of Line Code Violations (LCV) detected. An E3 Line Code Violation is an HDB3 coded signal error. LCV counting is inhibited for second intervals where a Line Severely Errored Second (LSES) is counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  Counter32  

mscLpE3LineErroredSec 1.3.6.1.4.1.562.36.2.1.12.6.17.1.4
This attribute indicates the total number of Line Errored Seconds (LES) that have been counted. A LES is declared for interval seconds containing one or more Line Code Violations (LCV) or one or more Loss Of Signal (LOS) defects.
OBJECT-TYPE    
  Counter32  

mscLpE3LineSevErroredSec 1.3.6.1.4.1.562.36.2.1.12.6.17.1.5
This attribute indicates the total number of Line Severely Errored Seconds (LSES) that have been counted. A LSES is declared for second intervals containing more than 34 Line Code Violations (LCV) or one or more Loss of Signal (LOS) defects.
OBJECT-TYPE    
  Counter32  

mscLpE3LineLosSec 1.3.6.1.4.1.562.36.2.1.12.6.17.1.6
This attribute indicates the total number of Line LOS Seconds (LOSS) that have been counted. A LOSS is declared for second intervals containing one or more Loss of Signal (LOS) defects.
OBJECT-TYPE    
  Counter32  

mscLpE3LineFailures 1.3.6.1.4.1.562.36.2.1.12.6.17.1.7
This attribute indicates the total number of times that a line failure (LOS failure) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  Counter32  

mscLpE3PathCodeViolations 1.3.6.1.4.1.562.36.2.1.12.6.17.1.8
This attribute indicates the total number of Path Code Violations (PCV) detected. An E3 PCV is an error in the Frame Alignment (FA) signal, or, in G.832 Framing Mode, an error in the Frame Alignment signal or a BIP-8 error. PCV counting is inhibited over second intervals where a Path Severely Errored Second (PSES) is counted. Counting of PCVs is also inhibited over second intervals where a Path Unavailable Second (PUAS) is counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  Counter32  

mscLpE3PathErroredSec 1.3.6.1.4.1.562.36.2.1.12.6.17.1.9
This attribute indicates the total number of Path Errored Seconds (PES) that have been counted. A PES is declared for second intervals containing one or more Path Code Violations (PCV) or one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of Path Errored Seconds is inhibited when a Path Unavailable Second (PUAS) is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

mscLpE3PathSevErroredSec 1.3.6.1.4.1.562.36.2.1.12.6.17.1.10
This attribute indicates the total number of Path Severely Errored Seconds (PSES) that have been counted. A PSES is declared for second intervals containing more than 22 (G.751 E3) or 34 (G.832 E3) Path Code Violations (PCV) or one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of PSESs is inhibited when a Path Unavailable Second (PUAS) is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

mscLpE3PathSefAisSec 1.3.6.1.4.1.562.36.2.1.12.6.17.1.11
This attribute indicates the total number of Path SEF/AIS Seconds (PSAS). A PSAS is declared for second intervals containing one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of PSAS is inhibited when Path Unavailable Seconds (PUAS) is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

mscLpE3PathUnavailSec 1.3.6.1.4.1.562.36.2.1.12.6.17.1.12
This attribute indicates the total number of one second intervals for which the E3 path is unavailable. The E3 path becomes unavailable at the onset of 10 consecutive Path Severely Errored Seconds (PSES). The 10 PSESs are included in the unavailable time. Once unavailable, the E3 path becomes available at the onset of 10 contiguous seconds with no PSES. The 10 seconds with no PSES are excluded from the unavailable time. For second intervals where PUAS is counted, counting of Path Code Violations (PCV), Path Errored Seconds (PES), Path Severely Errored Seconds (PSES) and Path SefAis Seconds (PSAS) is inhibited.
OBJECT-TYPE    
  Counter32  

mscLpE3PathFailures 1.3.6.1.4.1.562.36.2.1.12.6.17.1.13
This attribute indicates the total number of times that a path failure (LOF/AIS failure) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  Counter32  

mscLpDS1 1.3.6.1.4.1.562.36.2.1.12.7
OBJECT IDENTIFIER    

mscLpDS1RowStatusTable 1.3.6.1.4.1.562.36.2.1.12.7.1
This entry controls the addition and deletion of mscLpDS1 components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1RowStatusEntry

mscLpDS1RowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.7.1.1
A single entry in the table represents a single mscLpDS1 component.
OBJECT-TYPE    
  MscLpDS1RowStatusEntry  

mscLpDS1RowStatus 1.3.6.1.4.1.562.36.2.1.12.7.1.1.1
This variable is used as the basis for SNMP naming of mscLpDS1 components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscLpDS1ComponentName 1.3.6.1.4.1.562.36.2.1.12.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpDS1StorageType 1.3.6.1.4.1.562.36.2.1.12.7.1.1.4
This variable represents the storage type value for the mscLpDS1 tables.
OBJECT-TYPE    
  StorageType  

mscLpDS1Index 1.3.6.1.4.1.562.36.2.1.12.7.1.1.10
This variable represents the index for the mscLpDS1 tables.
OBJECT-TYPE    
  Integer32 0..31  

mscLpDS1Chan 1.3.6.1.4.1.562.36.2.1.12.7.2
OBJECT IDENTIFIER    

mscLpDS1ChanRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.7.2.1
This entry controls the addition and deletion of mscLpDS1Chan components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1ChanRowStatusEntry

mscLpDS1ChanRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.7.2.1.1
A single entry in the table represents a single mscLpDS1Chan component.
OBJECT-TYPE    
  MscLpDS1ChanRowStatusEntry  

mscLpDS1ChanRowStatus 1.3.6.1.4.1.562.36.2.1.12.7.2.1.1.1
This variable is used as the basis for SNMP naming of mscLpDS1Chan components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscLpDS1ChanComponentName 1.3.6.1.4.1.562.36.2.1.12.7.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpDS1ChanStorageType 1.3.6.1.4.1.562.36.2.1.12.7.2.1.1.4
This variable represents the storage type value for the mscLpDS1Chan tables.
OBJECT-TYPE    
  StorageType  

mscLpDS1ChanIndex 1.3.6.1.4.1.562.36.2.1.12.7.2.1.1.10
This variable represents the index for the mscLpDS1Chan tables.
OBJECT-TYPE    
  Integer32 0..24  

mscLpDS1ChanTest 1.3.6.1.4.1.562.36.2.1.12.7.2.2
OBJECT IDENTIFIER    

mscLpDS1ChanTestRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.7.2.2.1
This entry controls the addition and deletion of mscLpDS1ChanTest components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1ChanTestRowStatusEntry

mscLpDS1ChanTestRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.7.2.2.1.1
A single entry in the table represents a single mscLpDS1ChanTest component.
OBJECT-TYPE    
  MscLpDS1ChanTestRowStatusEntry  

mscLpDS1ChanTestRowStatus 1.3.6.1.4.1.562.36.2.1.12.7.2.2.1.1.1
This variable is used as the basis for SNMP naming of mscLpDS1ChanTest components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscLpDS1ChanTestComponentName 1.3.6.1.4.1.562.36.2.1.12.7.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpDS1ChanTestStorageType 1.3.6.1.4.1.562.36.2.1.12.7.2.2.1.1.4
This variable represents the storage type value for the mscLpDS1ChanTest tables.
OBJECT-TYPE    
  StorageType  

mscLpDS1ChanTestIndex 1.3.6.1.4.1.562.36.2.1.12.7.2.2.1.1.10
This variable represents the index for the mscLpDS1ChanTest tables.
OBJECT-TYPE    
  NonReplicated  

mscLpDS1ChanTestStateTable 1.3.6.1.4.1.562.36.2.1.12.7.2.2.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1ChanTestStateEntry

mscLpDS1ChanTestStateEntry 1.3.6.1.4.1.562.36.2.1.12.7.2.2.10.1
An entry in the mscLpDS1ChanTestStateTable.
OBJECT-TYPE    
  MscLpDS1ChanTestStateEntry  

mscLpDS1ChanTestAdminState 1.3.6.1.4.1.562.36.2.1.12.7.2.2.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscLpDS1ChanTestOperationalState 1.3.6.1.4.1.562.36.2.1.12.7.2.2.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpDS1ChanTestUsageState 1.3.6.1.4.1.562.36.2.1.12.7.2.2.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscLpDS1ChanTestSetupTable 1.3.6.1.4.1.562.36.2.1.12.7.2.2.11
This group contains all of the operational data for a Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1ChanTestSetupEntry

mscLpDS1ChanTestSetupEntry 1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1
An entry in the mscLpDS1ChanTestSetupTable.
OBJECT-TYPE    
  MscLpDS1ChanTestSetupEntry  

mscLpDS1ChanTestPurpose 1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.1
This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
OBJECT-TYPE    
  AsciiString SIZE(0..40)  

mscLpDS1ChanTestType 1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.2
This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
OBJECT-TYPE    
  INTEGER card(0), manual(1), localLoop(2), remoteLoop(3), externalLoop(4), payloadLoop(5), remoteLoopThisTrib(6), v54RemoteLoop(7), pn127RemoteLoop(8)  

mscLpDS1ChanTestFrmSize 1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.3
This attribute defines the size of the test data frames in number of bytes.
OBJECT-TYPE    
  Unsigned32 4..4096  

mscLpDS1ChanTestFrmPatternType 1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.4
This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
OBJECT-TYPE    
  INTEGER ccitt32kBitPattern(0), ccitt8MBitPattern(1), customizedPattern(2)  

mscLpDS1ChanTestCustomizedPattern 1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.5
This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
OBJECT-TYPE    
  Hex 0..4294967295  

mscLpDS1ChanTestDataStartDelay 1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.6
This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
OBJECT-TYPE    
  Unsigned32 0..1814400  

mscLpDS1ChanTestDisplayInterval 1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.7
This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
OBJECT-TYPE    
  Unsigned32 0..30240  

mscLpDS1ChanTestDuration 1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.8
This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
OBJECT-TYPE    
  Unsigned32 1..30240  

mscLpDS1ChanTestResultsTable 1.3.6.1.4.1.562.36.2.1.12.7.2.2.12
This group contains all the statistics related attributes of the Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1ChanTestResultsEntry

mscLpDS1ChanTestResultsEntry 1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1
An entry in the mscLpDS1ChanTestResultsTable.
OBJECT-TYPE    
  MscLpDS1ChanTestResultsEntry  

mscLpDS1ChanTestElapsedTime 1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.1
This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
OBJECT-TYPE    
  Counter32  

mscLpDS1ChanTestTimeRemaining 1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.2
This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscLpDS1ChanTestCauseOfTermination 1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.3
This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4), hardwareReconfigured(5), loopCodeSyncFailed(6), patternSyncFailed(7), patternSyncLost(8)  

mscLpDS1ChanTestBitsTx 1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.4
This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS1ChanTestBytesTx 1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.5
This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS1ChanTestFrmTx 1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.6
This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS1ChanTestBitsRx 1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.7
This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS1ChanTestBytesRx 1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.8
This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS1ChanTestFrmRx 1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.9
This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS1ChanTestErroredFrmRx 1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.10
This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS1ChanTestBitErrorRate 1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.11
This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
OBJECT-TYPE    
  AsciiString SIZE(5)  

mscLpDS1ChanCell 1.3.6.1.4.1.562.36.2.1.12.7.2.3
OBJECT IDENTIFIER    

mscLpDS1ChanCellRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.7.2.3.1
This entry controls the addition and deletion of mscLpDS1ChanCell components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1ChanCellRowStatusEntry

mscLpDS1ChanCellRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.7.2.3.1.1
A single entry in the table represents a single mscLpDS1ChanCell component.
OBJECT-TYPE    
  MscLpDS1ChanCellRowStatusEntry  

mscLpDS1ChanCellRowStatus 1.3.6.1.4.1.562.36.2.1.12.7.2.3.1.1.1
This variable is used as the basis for SNMP naming of mscLpDS1ChanCell components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscLpDS1ChanCellComponentName 1.3.6.1.4.1.562.36.2.1.12.7.2.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpDS1ChanCellStorageType 1.3.6.1.4.1.562.36.2.1.12.7.2.3.1.1.4
This variable represents the storage type value for the mscLpDS1ChanCell tables.
OBJECT-TYPE    
  StorageType  

mscLpDS1ChanCellIndex 1.3.6.1.4.1.562.36.2.1.12.7.2.3.1.1.10
This variable represents the index for the mscLpDS1ChanCell tables.
OBJECT-TYPE    
  NonReplicated  

mscLpDS1ChanCellProvTable 1.3.6.1.4.1.562.36.2.1.12.7.2.3.10
This group contains the provisioning attributes for the AtmCell component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1ChanCellProvEntry

mscLpDS1ChanCellProvEntry 1.3.6.1.4.1.562.36.2.1.12.7.2.3.10.1
An entry in the mscLpDS1ChanCellProvTable.
OBJECT-TYPE    
  MscLpDS1ChanCellProvEntry  

mscLpDS1ChanCellAlarmActDelay 1.3.6.1.4.1.562.36.2.1.12.7.2.3.10.1.1
This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
OBJECT-TYPE    
  Unsigned32 0..2000  

mscLpDS1ChanCellScrambleCellPayload 1.3.6.1.4.1.562.36.2.1.12.7.2.3.10.1.2
Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscLpDS1ChanCellCorrectSingleBitHeaderErrors 1.3.6.1.4.1.562.36.2.1.12.7.2.3.10.1.3
This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscLpDS1ChanCellOperTable 1.3.6.1.4.1.562.36.2.1.12.7.2.3.11
This group contains the common operational attributes for the AtmCell component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1ChanCellOperEntry

mscLpDS1ChanCellOperEntry 1.3.6.1.4.1.562.36.2.1.12.7.2.3.11.1
An entry in the mscLpDS1ChanCellOperTable.
OBJECT-TYPE    
  MscLpDS1ChanCellOperEntry  

mscLpDS1ChanCellLcdAlarm 1.3.6.1.4.1.562.36.2.1.12.7.2.3.11.1.1
This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpDS1ChanCellStatsTable 1.3.6.1.4.1.562.36.2.1.12.7.2.3.12
This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1ChanCellStatsEntry

mscLpDS1ChanCellStatsEntry 1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1
An entry in the mscLpDS1ChanCellStatsTable.
OBJECT-TYPE    
  MscLpDS1ChanCellStatsEntry  

mscLpDS1ChanCellUncorrectableHecErrors 1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1.1
This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
OBJECT-TYPE    
  Counter32  

mscLpDS1ChanCellSevErroredSec 1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1.2
This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
OBJECT-TYPE    
  Counter32  

mscLpDS1ChanCellReceiveCellUtilization 1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1.3
This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  Gauge32 0..100  

mscLpDS1ChanCellTransmitCellUtilization 1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1.4
This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  Gauge32 0..100  

mscLpDS1ChanCellCorrectableHeaderErrors 1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1.5
This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
OBJECT-TYPE    
  Counter32  

mscLpDS1ChanTc 1.3.6.1.4.1.562.36.2.1.12.7.2.4
OBJECT IDENTIFIER    

mscLpDS1ChanTcRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.7.2.4.1
This entry controls the addition and deletion of mscLpDS1ChanTc components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1ChanTcRowStatusEntry

mscLpDS1ChanTcRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.7.2.4.1.1
A single entry in the table represents a single mscLpDS1ChanTc component.
OBJECT-TYPE    
  MscLpDS1ChanTcRowStatusEntry  

mscLpDS1ChanTcRowStatus 1.3.6.1.4.1.562.36.2.1.12.7.2.4.1.1.1
This variable is used as the basis for SNMP naming of mscLpDS1ChanTc components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscLpDS1ChanTcComponentName 1.3.6.1.4.1.562.36.2.1.12.7.2.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpDS1ChanTcStorageType 1.3.6.1.4.1.562.36.2.1.12.7.2.4.1.1.4
This variable represents the storage type value for the mscLpDS1ChanTc tables.
OBJECT-TYPE    
  StorageType  

mscLpDS1ChanTcIndex 1.3.6.1.4.1.562.36.2.1.12.7.2.4.1.1.10
This variable represents the index for the mscLpDS1ChanTc tables.
OBJECT-TYPE    
  NonReplicated  

mscLpDS1ChanTcProvTable 1.3.6.1.4.1.562.36.2.1.12.7.2.4.10
This group contains all specific provisioning data for a Tc component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1ChanTcProvEntry

mscLpDS1ChanTcProvEntry 1.3.6.1.4.1.562.36.2.1.12.7.2.4.10.1
An entry in the mscLpDS1ChanTcProvTable.
OBJECT-TYPE    
  MscLpDS1ChanTcProvEntry  

mscLpDS1ChanTcReplacementData 1.3.6.1.4.1.562.36.2.1.12.7.2.4.10.1.1
This attribute specifies the trunk conditioning data byte to be substituted into the timeslots defined by the Chan component under fault conditions. replacementData can be set to any two digit hexadecimal number. The following are recommended values: DS1 MUX Out Of Service Code = 0x1A E1 MUX Out Of Service Code = 0xFF
OBJECT-TYPE    
  Hex 0..255  

mscLpDS1ChanTcSignalOneDuration 1.3.6.1.4.1.562.36.2.1.12.7.2.4.10.1.2
This attribute specifies the time duration in seconds for which signalOne is substituted into the appropriate signaling bits, when a lineType that uses CAS has been defined. When signalOneDuration has expired signalTwo is substituted into the appropriate signaling bits. If signalOneDuration is set to zero then only signalTwo is substituted into the appropriate signaling bits during error conditions. signalOneDuration can be set to any integer value from 0 to 60 seconds.
OBJECT-TYPE    
  Unsigned32 0..60  

mscLpDS1ChanTcOpTable 1.3.6.1.4.1.562.36.2.1.12.7.2.4.11
This group contains all specific operational data for a Tc component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1ChanTcOpEntry

mscLpDS1ChanTcOpEntry 1.3.6.1.4.1.562.36.2.1.12.7.2.4.11.1
An entry in the mscLpDS1ChanTcOpTable.
OBJECT-TYPE    
  MscLpDS1ChanTcOpEntry  

mscLpDS1ChanTcIngressConditioning 1.3.6.1.4.1.562.36.2.1.12.7.2.4.11.1.1
This attribute indicates the status of locally generated trunk conditioning towards the ATM network. When trunk conditioning is being locally generated towards the ATM network, ingressConditioning is set to on. When trunk conditioning is not being locally generated towards the ATM network, ingressConditioning is set to off. Trunk conditioning is transmitted towards the ATM network under the following conditions: lossOfSignal (LOS) lossOfFrame (LOF) remoteAlarmIndication (RAI) alarmIndicationSignal (AIS) bufferUnderflow (BU) and in addition for E1: lossOfMultiframe (LOMF) receiveMultiframeRemoteAlarmIndication (RMRAI)
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscLpDS1ChanTcEgressConditioning 1.3.6.1.4.1.562.36.2.1.12.7.2.4.11.1.2
This attribute indicates the status of locally generated trunk conditioning towards the PDH line. When trunk conditioning is being locally generated towards the PDH line, egressConditioning is set to on. When trunk conditioning is not being locally generated towards the PDH line, egressConditioning is set to off. Trunk conditioning is transmitted towards the PDH line under the following conditions: bufferUnderflow (BU) AAL1 protocol errors.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscLpDS1ChanTcSigOneTable 1.3.6.1.4.1.562.36.2.1.12.7.2.4.398
This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted for the duration provisioned in signalOneDuration when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1ChanTcSigOneEntry

mscLpDS1ChanTcSigOneEntry 1.3.6.1.4.1.562.36.2.1.12.7.2.4.398.1
An entry in the mscLpDS1ChanTcSigOneTable.
OBJECT-TYPE    
  MscLpDS1ChanTcSigOneEntry  

mscLpDS1ChanTcSigOneIndex 1.3.6.1.4.1.562.36.2.1.12.7.2.4.398.1.1
This variable represents the mscLpDS1ChanTcSigOneTable specific index for the mscLpDS1ChanTcSigOneTable.
OBJECT-TYPE    
  INTEGER d(0), c(1), b(2), a(3)  

mscLpDS1ChanTcSigOneValue 1.3.6.1.4.1.562.36.2.1.12.7.2.4.398.1.2
This variable represents an individual value for the mscLpDS1ChanTcSigOneTable.
OBJECT-TYPE    
  Unsigned32 0..1  

mscLpDS1ChanTcSigTwoTable 1.3.6.1.4.1.562.36.2.1.12.7.2.4.399
This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted after the duration provisioned in signalOneDuration has expired and when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1ChanTcSigTwoEntry

mscLpDS1ChanTcSigTwoEntry 1.3.6.1.4.1.562.36.2.1.12.7.2.4.399.1
An entry in the mscLpDS1ChanTcSigTwoTable.
OBJECT-TYPE    
  MscLpDS1ChanTcSigTwoEntry  

mscLpDS1ChanTcSigTwoIndex 1.3.6.1.4.1.562.36.2.1.12.7.2.4.399.1.1
This variable represents the mscLpDS1ChanTcSigTwoTable specific index for the mscLpDS1ChanTcSigTwoTable.
OBJECT-TYPE    
  INTEGER d(0), c(1), b(2), a(3)  

mscLpDS1ChanTcSigTwoValue 1.3.6.1.4.1.562.36.2.1.12.7.2.4.399.1.2
This variable represents an individual value for the mscLpDS1ChanTcSigTwoTable.
OBJECT-TYPE    
  Unsigned32 0..1  

mscLpDS1ChanProvTable 1.3.6.1.4.1.562.36.2.1.12.7.2.10
This group contains all of the provisional data for a Channel component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1ChanProvEntry

mscLpDS1ChanProvEntry 1.3.6.1.4.1.562.36.2.1.12.7.2.10.1
An entry in the mscLpDS1ChanProvTable.
OBJECT-TYPE    
  MscLpDS1ChanProvEntry  

mscLpDS1ChanTimeslots 1.3.6.1.4.1.562.36.2.1.12.7.2.10.1.1
This attribute contains the list of timeslots that are used by the Channel component. Valid numbers are 1-24 for a Channel used by a DS1 component, and 1-31 for a Channel used by an E1 component. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) n29(29) n30(30) n31(31)
OBJECT-TYPE    
  OCTET STRING SIZE(4)  

mscLpDS1ChanTimeslotDataRate 1.3.6.1.4.1.562.36.2.1.12.7.2.10.1.2
This attribute selects the data rate of the timeslots in a channel of a DS1 component. For E1, the data rate of the timeslots will always be 64kbit/s regardless of this attribute. When doNotOverride is selected for a channel on a DS1, the data rate of the channel's timeslots are dependant on the zeroCoding selection of the DS1 component. If the zeroCoding is B8ZS (where supported on the FP) or none, the timeslot's data rate will be 64kbit/ s. If the zeroCoding option is bit7Stuffing, the data rate of a timeslot will be 56kbit/s. When 56k is selected for a channel on a DS1, the least significant bit of each timeslot of this Channel will always be set to 1 and not used for data. The data rate for the timeslots of this channel is therefore restricted to 56kbit/s. One application of this attribute is to allow a DS1 line to support mixing channels that originate from lines that use different zeroCoding schemes.
OBJECT-TYPE    
  INTEGER n56k(0), doNotOverride(1)  

mscLpDS1ChanApplicationFramerName 1.3.6.1.4.1.562.36.2.1.12.7.2.10.1.3
This attribute defines the link to the software stack. It defines which application is running on top of this hardware component.
OBJECT-TYPE    
  Link  

mscLpDS1ChanCidDataTable 1.3.6.1.4.1.562.36.2.1.12.7.2.11
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1ChanCidDataEntry

mscLpDS1ChanCidDataEntry 1.3.6.1.4.1.562.36.2.1.12.7.2.11.1
An entry in the mscLpDS1ChanCidDataTable.
OBJECT-TYPE    
  MscLpDS1ChanCidDataEntry  

mscLpDS1ChanCustomerIdentifier 1.3.6.1.4.1.562.36.2.1.12.7.2.11.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

mscLpDS1ChanIfEntryTable 1.3.6.1.4.1.562.36.2.1.12.7.2.12
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1ChanIfEntryEntry

mscLpDS1ChanIfEntryEntry 1.3.6.1.4.1.562.36.2.1.12.7.2.12.1
An entry in the mscLpDS1ChanIfEntryTable.
OBJECT-TYPE    
  MscLpDS1ChanIfEntryEntry  

mscLpDS1ChanIfAdminStatus 1.3.6.1.4.1.562.36.2.1.12.7.2.12.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpDS1ChanIfIndex 1.3.6.1.4.1.562.36.2.1.12.7.2.12.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscLpDS1ChanOperStatusTable 1.3.6.1.4.1.562.36.2.1.12.7.2.13
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1ChanOperStatusEntry

mscLpDS1ChanOperStatusEntry 1.3.6.1.4.1.562.36.2.1.12.7.2.13.1
An entry in the mscLpDS1ChanOperStatusTable.
OBJECT-TYPE    
  MscLpDS1ChanOperStatusEntry  

mscLpDS1ChanSnmpOperStatus 1.3.6.1.4.1.562.36.2.1.12.7.2.13.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpDS1ChanStateTable 1.3.6.1.4.1.562.36.2.1.12.7.2.14
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1ChanStateEntry

mscLpDS1ChanStateEntry 1.3.6.1.4.1.562.36.2.1.12.7.2.14.1
An entry in the mscLpDS1ChanStateTable.
OBJECT-TYPE    
  MscLpDS1ChanStateEntry  

mscLpDS1ChanAdminState 1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscLpDS1ChanOperationalState 1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpDS1ChanUsageState 1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscLpDS1ChanAvailabilityStatus 1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

mscLpDS1ChanProceduralStatus 1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpDS1ChanControlStatus 1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpDS1ChanAlarmStatus 1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpDS1ChanStandbyStatus 1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

mscLpDS1ChanUnknownStatus 1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

mscLpDS1ChanOperTable 1.3.6.1.4.1.562.36.2.1.12.7.2.15
This group contains all of the operational data for a Channel component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1ChanOperEntry

mscLpDS1ChanOperEntry 1.3.6.1.4.1.562.36.2.1.12.7.2.15.1
An entry in the mscLpDS1ChanOperTable.
OBJECT-TYPE    
  MscLpDS1ChanOperEntry  

mscLpDS1ChanActualChannelSpeed 1.3.6.1.4.1.562.36.2.1.12.7.2.15.1.1
This attribute displays the measured link speed of the Channel component.
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscLpDS1ChanAdminInfoTable 1.3.6.1.4.1.562.36.2.1.12.7.2.16
This group contains the attributes pertaining to the vendor of the equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1ChanAdminInfoEntry

mscLpDS1ChanAdminInfoEntry 1.3.6.1.4.1.562.36.2.1.12.7.2.16.1
An entry in the mscLpDS1ChanAdminInfoTable.
OBJECT-TYPE    
  MscLpDS1ChanAdminInfoEntry  

mscLpDS1ChanVendor 1.3.6.1.4.1.562.36.2.1.12.7.2.16.1.1
This is the name of the vendor supplying the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..20)  

mscLpDS1ChanCommentText 1.3.6.1.4.1.562.36.2.1.12.7.2.16.1.2
Any miscellaneous text about the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..60)  

mscLpDS1Test 1.3.6.1.4.1.562.36.2.1.12.7.3
OBJECT IDENTIFIER    

mscLpDS1TestRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.7.3.1
This entry controls the addition and deletion of mscLpDS1Test components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1TestRowStatusEntry

mscLpDS1TestRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.7.3.1.1
A single entry in the table represents a single mscLpDS1Test component.
OBJECT-TYPE    
  MscLpDS1TestRowStatusEntry  

mscLpDS1TestRowStatus 1.3.6.1.4.1.562.36.2.1.12.7.3.1.1.1
This variable is used as the basis for SNMP naming of mscLpDS1Test components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscLpDS1TestComponentName 1.3.6.1.4.1.562.36.2.1.12.7.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpDS1TestStorageType 1.3.6.1.4.1.562.36.2.1.12.7.3.1.1.4
This variable represents the storage type value for the mscLpDS1Test tables.
OBJECT-TYPE    
  StorageType  

mscLpDS1TestIndex 1.3.6.1.4.1.562.36.2.1.12.7.3.1.1.10
This variable represents the index for the mscLpDS1Test tables.
OBJECT-TYPE    
  NonReplicated  

mscLpDS1TestStateTable 1.3.6.1.4.1.562.36.2.1.12.7.3.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1TestStateEntry

mscLpDS1TestStateEntry 1.3.6.1.4.1.562.36.2.1.12.7.3.10.1
An entry in the mscLpDS1TestStateTable.
OBJECT-TYPE    
  MscLpDS1TestStateEntry  

mscLpDS1TestAdminState 1.3.6.1.4.1.562.36.2.1.12.7.3.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscLpDS1TestOperationalState 1.3.6.1.4.1.562.36.2.1.12.7.3.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpDS1TestUsageState 1.3.6.1.4.1.562.36.2.1.12.7.3.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscLpDS1TestSetupTable 1.3.6.1.4.1.562.36.2.1.12.7.3.11
This group contains all of the operational data for a Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1TestSetupEntry

mscLpDS1TestSetupEntry 1.3.6.1.4.1.562.36.2.1.12.7.3.11.1
An entry in the mscLpDS1TestSetupTable.
OBJECT-TYPE    
  MscLpDS1TestSetupEntry  

mscLpDS1TestPurpose 1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.1
This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
OBJECT-TYPE    
  AsciiString SIZE(0..40)  

mscLpDS1TestType 1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.2
This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
OBJECT-TYPE    
  INTEGER card(0), manual(1), localLoop(2), remoteLoop(3), externalLoop(4), payloadLoop(5), remoteLoopThisTrib(6), v54RemoteLoop(7), pn127RemoteLoop(8)  

mscLpDS1TestFrmSize 1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.3
This attribute defines the size of the test data frames in number of bytes.
OBJECT-TYPE    
  Unsigned32 4..4096  

mscLpDS1TestFrmPatternType 1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.4
This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
OBJECT-TYPE    
  INTEGER ccitt32kBitPattern(0), ccitt8MBitPattern(1), customizedPattern(2)  

mscLpDS1TestCustomizedPattern 1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.5
This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
OBJECT-TYPE    
  Hex 0..4294967295  

mscLpDS1TestDataStartDelay 1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.6
This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
OBJECT-TYPE    
  Unsigned32 0..1814400  

mscLpDS1TestDisplayInterval 1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.7
This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
OBJECT-TYPE    
  Unsigned32 0..30240  

mscLpDS1TestDuration 1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.8
This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
OBJECT-TYPE    
  Unsigned32 1..30240  

mscLpDS1TestResultsTable 1.3.6.1.4.1.562.36.2.1.12.7.3.12
This group contains all the statistics related attributes of the Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1TestResultsEntry

mscLpDS1TestResultsEntry 1.3.6.1.4.1.562.36.2.1.12.7.3.12.1
An entry in the mscLpDS1TestResultsTable.
OBJECT-TYPE    
  MscLpDS1TestResultsEntry  

mscLpDS1TestElapsedTime 1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.1
This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
OBJECT-TYPE    
  Counter32  

mscLpDS1TestTimeRemaining 1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.2
This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscLpDS1TestCauseOfTermination 1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.3
This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4), hardwareReconfigured(5), loopCodeSyncFailed(6), patternSyncFailed(7), patternSyncLost(8)  

mscLpDS1TestBitsTx 1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.4
This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS1TestBytesTx 1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.5
This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS1TestFrmTx 1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.6
This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS1TestBitsRx 1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.7
This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS1TestBytesRx 1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.8
This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS1TestFrmRx 1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.9
This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS1TestErroredFrmRx 1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.10
This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpDS1TestBitErrorRate 1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.11
This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
OBJECT-TYPE    
  AsciiString SIZE(5)  

mscLpDS1Dsp 1.3.6.1.4.1.562.36.2.1.12.7.4
OBJECT IDENTIFIER    

mscLpDS1DspRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.7.4.1
This entry controls the addition and deletion of mscLpDS1Dsp components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1DspRowStatusEntry

mscLpDS1DspRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.7.4.1.1
A single entry in the table represents a single mscLpDS1Dsp component.
OBJECT-TYPE    
  MscLpDS1DspRowStatusEntry  

mscLpDS1DspRowStatus 1.3.6.1.4.1.562.36.2.1.12.7.4.1.1.1
This variable is used as the basis for SNMP naming of mscLpDS1Dsp components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscLpDS1DspComponentName 1.3.6.1.4.1.562.36.2.1.12.7.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpDS1DspStorageType 1.3.6.1.4.1.562.36.2.1.12.7.4.1.1.4
This variable represents the storage type value for the mscLpDS1Dsp tables.
OBJECT-TYPE    
  StorageType  

mscLpDS1DspIndex 1.3.6.1.4.1.562.36.2.1.12.7.4.1.1.10
This variable represents the index for the mscLpDS1Dsp tables.
OBJECT-TYPE    
  NonReplicated  

mscLpDS1Audio 1.3.6.1.4.1.562.36.2.1.12.7.5
OBJECT IDENTIFIER    

mscLpDS1AudioRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.7.5.1
This entry controls the addition and deletion of mscLpDS1Audio components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1AudioRowStatusEntry

mscLpDS1AudioRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.7.5.1.1
A single entry in the table represents a single mscLpDS1Audio component.
OBJECT-TYPE    
  MscLpDS1AudioRowStatusEntry  

mscLpDS1AudioRowStatus 1.3.6.1.4.1.562.36.2.1.12.7.5.1.1.1
This variable is used as the basis for SNMP naming of mscLpDS1Audio components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscLpDS1AudioComponentName 1.3.6.1.4.1.562.36.2.1.12.7.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpDS1AudioStorageType 1.3.6.1.4.1.562.36.2.1.12.7.5.1.1.4
This variable represents the storage type value for the mscLpDS1Audio tables.
OBJECT-TYPE    
  StorageType  

mscLpDS1AudioIndex 1.3.6.1.4.1.562.36.2.1.12.7.5.1.1.10
This variable represents the index for the mscLpDS1Audio tables.
OBJECT-TYPE    
  NonReplicated  

mscLpDS1ProvTable 1.3.6.1.4.1.562.36.2.1.12.7.10
This group contains all of the provisioning data for a DS1 component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1ProvEntry

mscLpDS1ProvEntry 1.3.6.1.4.1.562.36.2.1.12.7.10.1
An entry in the mscLpDS1ProvTable.
OBJECT-TYPE    
  MscLpDS1ProvEntry  

mscLpDS1LineType 1.3.6.1.4.1.562.36.2.1.12.7.10.1.1
This attribute defines the framing of the DS1 line. d4 defines a framing pattern of 12 frames per multiframe. esf defines a framing pattern of 24 frames per multiframe. d4Cas defines a framing pattern of 12 frames per multiframe with channel associated signalling. esfCas defines a framing pattern of 24 frames per multiframe with channel associated signalling. unframed defines an unknown framing pattern for clear channels. For cell-based cards only the default option esf is permitted.
OBJECT-TYPE    
  INTEGER d4(0), esf(1), d4Cas(4), esfCas(5), unframed(6)  

mscLpDS1ZeroCoding 1.3.6.1.4.1.562.36.2.1.12.7.10.1.2
This attribute defines the zero encoding on the DS1 line. bit7Stuffing sets bit 7 of every timeslot to a one to guarantee ones's density. This reduces the available bandwidth of the channel by 1/8. b8zs substitutes a pattern of bipolar violations if more than 7 zeros in a row are to be transported. ami specifies Alternate Mark Inversion, in which successive marks (ones) alternate between positive and negative polarity voltage signals, and spaces (zeros) are sent as a zero amplitude signal. When zeroCoding is set to ami and lineType is set to d4, it is recommended that raiAlarmType be set to SBit in order to avoid possible mimic RAI alarm. For cell-based cards only the default value b8zs is permitted.
OBJECT-TYPE    
  INTEGER bit7Stuffing(0), b8zs(1), ami(2)  

mscLpDS1ClockingSource 1.3.6.1.4.1.562.36.2.1.12.7.10.1.3
This attribute defines the source of the transmit clock for the DS1 line. When local is selected, the crystal on the port generates the clocking for the line. When line is selected, the port synchronizes to the clock from the facility. When module is selected, the ports clock synchronizes to the clock provided by the oscillator on the active CP. When otherPort is selected, the port synchronizes to the port with a clocking source of line. When srtsMode is selected, the port transmit frequency depends on the SRTS (Synchronous Residual Time-Stamp) received over the ATM network. SRTS information is also generated sent over the ATM network. When adaptiveMode is selected, the port transmit frequency continually adapts to match the egress data received from the ATM network. A port with srtsMode or adaptiveMode must have a single Chan which may be linked only to an Aal1Ces.service with serviceType unstructured If the NetworkSynchronization component is present, the default value of this attribute is module, otherwise it defaults to line, except for the 3pDS1Atm card, which it defaults to local. On a 3pDS1Atm card all ports must have the same value, and be either local or module. otherPort is valid only on AAL1 cards. srtsMode is valid only on AAL1 and Multi-Service Access cards. adaptiveMode is valid only on Multi-Service Access cards. On 4DS1Aal1 cards either: all four ports' clockingSource values must be local OR all four ports' clockingSource values must be module OR one port's clockingSource value must be line and the other three must be otherPort. A port can only have srtsMode selected if the other ports are module or srtsMode.
OBJECT-TYPE    
  INTEGER local(0), line(1), module(2), otherPort(3), srtsMode(4), adaptiveMode(5)  

mscLpDS1RaiAlarmType 1.3.6.1.4.1.562.36.2.1.12.7.10.1.4
This attribute defines the method of sending a RAI (Remote Alarm Indication) alarm on a DS1 line. When SBit is selected, RAI alarm is sent by setting the S bit in frame 12. When Bit2 is selected, RAI alarm is sent by setting bit 2 in all timeslots to 0. When fdl is selected, RAI alarm is sent by a repeating pattern of 00 hex and FF hex on the FDL link. Note that for lineType of d4, only the SBit and the Bit2 methods are applicable. Whereas for lineType of esf, only the Bit2 and the fdl methods are applicable. SBit method is recommended if lineType is set to d4 and zeroCoding is set to ami. This will help to avoid potential mimic RAI alarm when 1's density is too low in the data transmitted. For cell-based cards only the default value fdl is permitted.
OBJECT-TYPE    
  INTEGER sBit(0), bit2(1), fdl(2)  

mscLpDS1LineLength 1.3.6.1.4.1.562.36.2.1.12.7.10.1.5
This attribute defines the line length (in feet) for equalization calculations for the DS1 line. The value ranges between 0-655. For 8pDS1Atm cards the actual value used for equalization is rounded up to the nearest 110 feet; for all other card types the actual value used is rounded to the nearest 50 feet.
OBJECT-TYPE    
  Unsigned32 0..655  

mscLpDS1CidDataTable 1.3.6.1.4.1.562.36.2.1.12.7.11
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1CidDataEntry

mscLpDS1CidDataEntry 1.3.6.1.4.1.562.36.2.1.12.7.11.1
An entry in the mscLpDS1CidDataTable.
OBJECT-TYPE    
  MscLpDS1CidDataEntry  

mscLpDS1CustomerIdentifier 1.3.6.1.4.1.562.36.2.1.12.7.11.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

mscLpDS1AdminInfoTable 1.3.6.1.4.1.562.36.2.1.12.7.12
This group contains the attributes pertaining to the vendor of the equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1AdminInfoEntry

mscLpDS1AdminInfoEntry 1.3.6.1.4.1.562.36.2.1.12.7.12.1
An entry in the mscLpDS1AdminInfoTable.
OBJECT-TYPE    
  MscLpDS1AdminInfoEntry  

mscLpDS1Vendor 1.3.6.1.4.1.562.36.2.1.12.7.12.1.1
This is the name of the vendor supplying the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..20)  

mscLpDS1CommentText 1.3.6.1.4.1.562.36.2.1.12.7.12.1.2
Any miscellaneous text about the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..60)  

mscLpDS1IfEntryTable 1.3.6.1.4.1.562.36.2.1.12.7.13
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1IfEntryEntry

mscLpDS1IfEntryEntry 1.3.6.1.4.1.562.36.2.1.12.7.13.1
An entry in the mscLpDS1IfEntryTable.
OBJECT-TYPE    
  MscLpDS1IfEntryEntry  

mscLpDS1IfAdminStatus 1.3.6.1.4.1.562.36.2.1.12.7.13.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpDS1IfIndex 1.3.6.1.4.1.562.36.2.1.12.7.13.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscLpDS1OperStatusTable 1.3.6.1.4.1.562.36.2.1.12.7.14
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1OperStatusEntry

mscLpDS1OperStatusEntry 1.3.6.1.4.1.562.36.2.1.12.7.14.1
An entry in the mscLpDS1OperStatusTable.
OBJECT-TYPE    
  MscLpDS1OperStatusEntry  

mscLpDS1SnmpOperStatus 1.3.6.1.4.1.562.36.2.1.12.7.14.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpDS1StateTable 1.3.6.1.4.1.562.36.2.1.12.7.15
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1StateEntry

mscLpDS1StateEntry 1.3.6.1.4.1.562.36.2.1.12.7.15.1
An entry in the mscLpDS1StateTable.
OBJECT-TYPE    
  MscLpDS1StateEntry  

mscLpDS1AdminState 1.3.6.1.4.1.562.36.2.1.12.7.15.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscLpDS1OperationalState 1.3.6.1.4.1.562.36.2.1.12.7.15.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpDS1UsageState 1.3.6.1.4.1.562.36.2.1.12.7.15.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscLpDS1AvailabilityStatus 1.3.6.1.4.1.562.36.2.1.12.7.15.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

mscLpDS1ProceduralStatus 1.3.6.1.4.1.562.36.2.1.12.7.15.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpDS1ControlStatus 1.3.6.1.4.1.562.36.2.1.12.7.15.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpDS1AlarmStatus 1.3.6.1.4.1.562.36.2.1.12.7.15.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpDS1StandbyStatus 1.3.6.1.4.1.562.36.2.1.12.7.15.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

mscLpDS1UnknownStatus 1.3.6.1.4.1.562.36.2.1.12.7.15.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

mscLpDS1OperTable 1.3.6.1.4.1.562.36.2.1.12.7.16
This group contains the common operational data for a component in a digital hierarchy interface.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1OperEntry

mscLpDS1OperEntry 1.3.6.1.4.1.562.36.2.1.12.7.16.1
An entry in the mscLpDS1OperTable.
OBJECT-TYPE    
  MscLpDS1OperEntry  

mscLpDS1LosAlarm 1.3.6.1.4.1.562.36.2.1.12.7.16.1.1
This attribute displays whether a LOS (Loss of Signal) alarm state has been entered. A LOS alarm is declared after LOS defects have been observed and accumulated for a period of 2 seconds +/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). A LOS defect is detected upon observing all zeros for 150 ms (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: upon observing 175 +/- 75 pulse positions with no pulses of either positive or negative polarity). If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOS alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOS alarm state. The LOS alarm state is cleared when LOS defects are absent for 10 seconds +/- 0.5 seconds.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpDS1RxAisAlarm 1.3.6.1.4.1.562.36.2.1.12.7.16.1.2
This attribute displays whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/ - 0.5 seconds. An AIS defect is detected after having received less than 3 zeros in a 2048 bit period (for 8pDS1Atm cards: when both an Out Of Frame condition exists and a 1's density of at least 99.9% is present for a time T, where 3 ms T 75 ms; for 8pE1Atm cards: when both an Out Of Frame condition exists and fewer than three 0's have been received in 512 bit periods). If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled for the duration of an AIS alarm state. The AIS alarm state is cleared when AIS defects are absent for 10 seconds +/- 0.5 seconds.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpDS1LofAlarm 1.3.6.1.4.1.562.36.2.1.12.7.16.1.3
This attribute displays whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defects (for DS1: 2 out of 5 framing bits in error; for E1: 3 consecutive frame alignment patterns in error) have been detected for 3 seconds +/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOF alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOF alarm state The condition is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpDS1RxRaiAlarm 1.3.6.1.4.1.562.36.2.1.12.7.16.1.4
This attribute displays whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered when the RAI defect indicator has been observed and accumulated for 3.5 seconds +/- 0.5 seconds. For 3pDS1Atm, and 8pDS1Atm cards: alarm is declared immediately upon observing the defect is present, with no integration time. For 3pE1Atm, and 8pE1Atm cards: alarm state is entered when the RAI defect indicator has been observed and accumulated for 2.5 seconds +/- 0.5 seconds. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The RAI alarm state is cleared when the RAI defect indicator has been absent for 10 seconds +/- 0.5 seconds (for 3pDS1Atm, and 8pDS1Atm cards: alarm is cleared immediately upon observing the defect is absent, with no integration time). The RAI alarm is usually an indication that the far end facility is unable to gain synchronization.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpDS1TxAisAlarm 1.3.6.1.4.1.562.36.2.1.12.7.16.1.5
This attribute displays whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transmitted when the port is in a locked state.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpDS1TxRaiAlarm 1.3.6.1.4.1.562.36.2.1.12.7.16.1.6
This attribute displays whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the port detects a LOF alarm condition (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: RAI is transmitted when the port detects a LOS, LOF, or AIS condition).
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpDS1StatsTable 1.3.6.1.4.1.562.36.2.1.12.7.17
This group contains the common statistical data for a component in a digital hierarchy interface.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpDS1StatsEntry

mscLpDS1StatsEntry 1.3.6.1.4.1.562.36.2.1.12.7.17.1
An entry in the mscLpDS1StatsTable.
OBJECT-TYPE    
  MscLpDS1StatsEntry  

mscLpDS1RunningTime 1.3.6.1.4.1.562.36.2.1.12.7.17.1.1
The number of seconds since the port component was activated.
OBJECT-TYPE    
  Counter32  

mscLpDS1ErrorFreeSec 1.3.6.1.4.1.562.36.2.1.12.7.17.1.2
The number of seconds that the port has been in an error free state.
OBJECT-TYPE    
  Counter32  

mscLpDS1ErroredSec 1.3.6.1.4.1.562.36.2.1.12.7.17.1.3
An errored second is declared when a second with one or more Code Violation Error events, or one or more Out Of Frame events occurs. A code violation error may be a CRC error or a BPV error. An Out Of Frame event occurs when 2 out of 5 framing bits are in error.
OBJECT-TYPE    
  Counter32  

mscLpDS1SevErroredSec 1.3.6.1.4.1.562.36.2.1.12.7.17.1.4
A severely errored second occurs when a second with 320 or more Code Violation Error events or one or more Out Of Frame events occurs.
OBJECT-TYPE    
  Counter32  

mscLpDS1SevErroredFrmSec 1.3.6.1.4.1.562.36.2.1.12.7.17.1.5
A severely errored framing second occurs when a second with one or more Out Of Frame events occurs.
OBJECT-TYPE    
  Counter32  

mscLpDS1UnavailSec 1.3.6.1.4.1.562.36.2.1.12.7.17.1.6
The total number of seconds that the interface is in an unavailable signal state. An unavailable signal state occurs at the onset of 10 consecutive Severely Errored Seconds. The state is cleared at the onset of 10 seconds with no Severely Errored Seconds.
OBJECT-TYPE    
  Counter32  

mscLpDS1BpvErrors 1.3.6.1.4.1.562.36.2.1.12.7.17.1.7
The current count of Bipolar Violations. A bipolar violation is an error in the alternate mark inversion pattern (AMI) on the line.
OBJECT-TYPE    
  Counter32  

mscLpDS1CrcErrors 1.3.6.1.4.1.562.36.2.1.12.7.17.1.8
If the interface is a DS1 line, it is the current count of CRC-6 errors. These will only be counted when the lineType is ESF. If the interface is an E1 line, it is the total number of CRC-4 errors. These will only be counted when crc4Mode is on.
OBJECT-TYPE    
  Counter32  

mscLpDS1FrmErrors 1.3.6.1.4.1.562.36.2.1.12.7.17.1.9
The current count of frame errors. A frame error is an error in the framing bits
OBJECT-TYPE    
  Counter32  

mscLpDS1LosStateChanges 1.3.6.1.4.1.562.36.2.1.12.7.17.1.10
The total number of times that the line lost signal.
OBJECT-TYPE    
  Counter32  

mscLpDS1SlipErrors 1.3.6.1.4.1.562.36.2.1.12.7.17.1.11
The total number of times that the line experienced a controlled frame slip. This attribute is incremented for ports on the voice cards (for example the 1pDS1V and the 1pE1V function processors) only.
OBJECT-TYPE    
  Counter32  

mscLpE1 1.3.6.1.4.1.562.36.2.1.12.8
OBJECT IDENTIFIER    

mscLpE1RowStatusTable 1.3.6.1.4.1.562.36.2.1.12.8.1
This entry controls the addition and deletion of mscLpE1 components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1RowStatusEntry

mscLpE1RowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.8.1.1
A single entry in the table represents a single mscLpE1 component.
OBJECT-TYPE    
  MscLpE1RowStatusEntry  

mscLpE1RowStatus 1.3.6.1.4.1.562.36.2.1.12.8.1.1.1
This variable is used as the basis for SNMP naming of mscLpE1 components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscLpE1ComponentName 1.3.6.1.4.1.562.36.2.1.12.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpE1StorageType 1.3.6.1.4.1.562.36.2.1.12.8.1.1.4
This variable represents the storage type value for the mscLpE1 tables.
OBJECT-TYPE    
  StorageType  

mscLpE1Index 1.3.6.1.4.1.562.36.2.1.12.8.1.1.10
This variable represents the index for the mscLpE1 tables.
OBJECT-TYPE    
  Integer32 0..31  

mscLpE1Chan 1.3.6.1.4.1.562.36.2.1.12.8.2
OBJECT IDENTIFIER    

mscLpE1ChanRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.8.2.1
This entry controls the addition and deletion of mscLpE1Chan components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1ChanRowStatusEntry

mscLpE1ChanRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.8.2.1.1
A single entry in the table represents a single mscLpE1Chan component.
OBJECT-TYPE    
  MscLpE1ChanRowStatusEntry  

mscLpE1ChanRowStatus 1.3.6.1.4.1.562.36.2.1.12.8.2.1.1.1
This variable is used as the basis for SNMP naming of mscLpE1Chan components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscLpE1ChanComponentName 1.3.6.1.4.1.562.36.2.1.12.8.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpE1ChanStorageType 1.3.6.1.4.1.562.36.2.1.12.8.2.1.1.4
This variable represents the storage type value for the mscLpE1Chan tables.
OBJECT-TYPE    
  StorageType  

mscLpE1ChanIndex 1.3.6.1.4.1.562.36.2.1.12.8.2.1.1.10
This variable represents the index for the mscLpE1Chan tables.
OBJECT-TYPE    
  Integer32 0..31  

mscLpE1ChanTest 1.3.6.1.4.1.562.36.2.1.12.8.2.2
OBJECT IDENTIFIER    

mscLpE1ChanTestRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.8.2.2.1
This entry controls the addition and deletion of mscLpE1ChanTest components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1ChanTestRowStatusEntry

mscLpE1ChanTestRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.8.2.2.1.1
A single entry in the table represents a single mscLpE1ChanTest component.
OBJECT-TYPE    
  MscLpE1ChanTestRowStatusEntry  

mscLpE1ChanTestRowStatus 1.3.6.1.4.1.562.36.2.1.12.8.2.2.1.1.1
This variable is used as the basis for SNMP naming of mscLpE1ChanTest components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscLpE1ChanTestComponentName 1.3.6.1.4.1.562.36.2.1.12.8.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpE1ChanTestStorageType 1.3.6.1.4.1.562.36.2.1.12.8.2.2.1.1.4
This variable represents the storage type value for the mscLpE1ChanTest tables.
OBJECT-TYPE    
  StorageType  

mscLpE1ChanTestIndex 1.3.6.1.4.1.562.36.2.1.12.8.2.2.1.1.10
This variable represents the index for the mscLpE1ChanTest tables.
OBJECT-TYPE    
  NonReplicated  

mscLpE1ChanTestStateTable 1.3.6.1.4.1.562.36.2.1.12.8.2.2.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1ChanTestStateEntry

mscLpE1ChanTestStateEntry 1.3.6.1.4.1.562.36.2.1.12.8.2.2.10.1
An entry in the mscLpE1ChanTestStateTable.
OBJECT-TYPE    
  MscLpE1ChanTestStateEntry  

mscLpE1ChanTestAdminState 1.3.6.1.4.1.562.36.2.1.12.8.2.2.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscLpE1ChanTestOperationalState 1.3.6.1.4.1.562.36.2.1.12.8.2.2.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpE1ChanTestUsageState 1.3.6.1.4.1.562.36.2.1.12.8.2.2.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscLpE1ChanTestSetupTable 1.3.6.1.4.1.562.36.2.1.12.8.2.2.11
This group contains all of the operational data for a Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1ChanTestSetupEntry

mscLpE1ChanTestSetupEntry 1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1
An entry in the mscLpE1ChanTestSetupTable.
OBJECT-TYPE    
  MscLpE1ChanTestSetupEntry  

mscLpE1ChanTestPurpose 1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.1
This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
OBJECT-TYPE    
  AsciiString SIZE(0..40)  

mscLpE1ChanTestType 1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.2
This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
OBJECT-TYPE    
  INTEGER card(0), manual(1), localLoop(2), remoteLoop(3), externalLoop(4), payloadLoop(5), remoteLoopThisTrib(6), v54RemoteLoop(7), pn127RemoteLoop(8)  

mscLpE1ChanTestFrmSize 1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.3
This attribute defines the size of the test data frames in number of bytes.
OBJECT-TYPE    
  Unsigned32 4..4096  

mscLpE1ChanTestFrmPatternType 1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.4
This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
OBJECT-TYPE    
  INTEGER ccitt32kBitPattern(0), ccitt8MBitPattern(1), customizedPattern(2)  

mscLpE1ChanTestCustomizedPattern 1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.5
This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
OBJECT-TYPE    
  Hex 0..4294967295  

mscLpE1ChanTestDataStartDelay 1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.6
This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
OBJECT-TYPE    
  Unsigned32 0..1814400  

mscLpE1ChanTestDisplayInterval 1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.7
This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
OBJECT-TYPE    
  Unsigned32 0..30240  

mscLpE1ChanTestDuration 1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.8
This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
OBJECT-TYPE    
  Unsigned32 1..30240  

mscLpE1ChanTestResultsTable 1.3.6.1.4.1.562.36.2.1.12.8.2.2.12
This group contains all the statistics related attributes of the Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1ChanTestResultsEntry

mscLpE1ChanTestResultsEntry 1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1
An entry in the mscLpE1ChanTestResultsTable.
OBJECT-TYPE    
  MscLpE1ChanTestResultsEntry  

mscLpE1ChanTestElapsedTime 1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.1
This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
OBJECT-TYPE    
  Counter32  

mscLpE1ChanTestTimeRemaining 1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.2
This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscLpE1ChanTestCauseOfTermination 1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.3
This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4), hardwareReconfigured(5), loopCodeSyncFailed(6), patternSyncFailed(7), patternSyncLost(8)  

mscLpE1ChanTestBitsTx 1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.4
This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpE1ChanTestBytesTx 1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.5
This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpE1ChanTestFrmTx 1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.6
This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpE1ChanTestBitsRx 1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.7
This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpE1ChanTestBytesRx 1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.8
This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpE1ChanTestFrmRx 1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.9
This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpE1ChanTestErroredFrmRx 1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.10
This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpE1ChanTestBitErrorRate 1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.11
This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
OBJECT-TYPE    
  AsciiString SIZE(5)  

mscLpE1ChanCell 1.3.6.1.4.1.562.36.2.1.12.8.2.3
OBJECT IDENTIFIER    

mscLpE1ChanCellRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.8.2.3.1
This entry controls the addition and deletion of mscLpE1ChanCell components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1ChanCellRowStatusEntry

mscLpE1ChanCellRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.8.2.3.1.1
A single entry in the table represents a single mscLpE1ChanCell component.
OBJECT-TYPE    
  MscLpE1ChanCellRowStatusEntry  

mscLpE1ChanCellRowStatus 1.3.6.1.4.1.562.36.2.1.12.8.2.3.1.1.1
This variable is used as the basis for SNMP naming of mscLpE1ChanCell components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscLpE1ChanCellComponentName 1.3.6.1.4.1.562.36.2.1.12.8.2.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpE1ChanCellStorageType 1.3.6.1.4.1.562.36.2.1.12.8.2.3.1.1.4
This variable represents the storage type value for the mscLpE1ChanCell tables.
OBJECT-TYPE    
  StorageType  

mscLpE1ChanCellIndex 1.3.6.1.4.1.562.36.2.1.12.8.2.3.1.1.10
This variable represents the index for the mscLpE1ChanCell tables.
OBJECT-TYPE    
  NonReplicated  

mscLpE1ChanCellProvTable 1.3.6.1.4.1.562.36.2.1.12.8.2.3.10
This group contains the provisioning attributes for the AtmCell component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1ChanCellProvEntry

mscLpE1ChanCellProvEntry 1.3.6.1.4.1.562.36.2.1.12.8.2.3.10.1
An entry in the mscLpE1ChanCellProvTable.
OBJECT-TYPE    
  MscLpE1ChanCellProvEntry  

mscLpE1ChanCellAlarmActDelay 1.3.6.1.4.1.562.36.2.1.12.8.2.3.10.1.1
This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
OBJECT-TYPE    
  Unsigned32 0..2000  

mscLpE1ChanCellScrambleCellPayload 1.3.6.1.4.1.562.36.2.1.12.8.2.3.10.1.2
Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscLpE1ChanCellCorrectSingleBitHeaderErrors 1.3.6.1.4.1.562.36.2.1.12.8.2.3.10.1.3
This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscLpE1ChanCellOperTable 1.3.6.1.4.1.562.36.2.1.12.8.2.3.11
This group contains the common operational attributes for the AtmCell component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1ChanCellOperEntry

mscLpE1ChanCellOperEntry 1.3.6.1.4.1.562.36.2.1.12.8.2.3.11.1
An entry in the mscLpE1ChanCellOperTable.
OBJECT-TYPE    
  MscLpE1ChanCellOperEntry  

mscLpE1ChanCellLcdAlarm 1.3.6.1.4.1.562.36.2.1.12.8.2.3.11.1.1
This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpE1ChanCellStatsTable 1.3.6.1.4.1.562.36.2.1.12.8.2.3.12
This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1ChanCellStatsEntry

mscLpE1ChanCellStatsEntry 1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1
An entry in the mscLpE1ChanCellStatsTable.
OBJECT-TYPE    
  MscLpE1ChanCellStatsEntry  

mscLpE1ChanCellUncorrectableHecErrors 1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1.1
This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
OBJECT-TYPE    
  Counter32  

mscLpE1ChanCellSevErroredSec 1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1.2
This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
OBJECT-TYPE    
  Counter32  

mscLpE1ChanCellReceiveCellUtilization 1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1.3
This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  Gauge32 0..100  

mscLpE1ChanCellTransmitCellUtilization 1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1.4
This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  Gauge32 0..100  

mscLpE1ChanCellCorrectableHeaderErrors 1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1.5
This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
OBJECT-TYPE    
  Counter32  

mscLpE1ChanTc 1.3.6.1.4.1.562.36.2.1.12.8.2.4
OBJECT IDENTIFIER    

mscLpE1ChanTcRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.8.2.4.1
This entry controls the addition and deletion of mscLpE1ChanTc components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1ChanTcRowStatusEntry

mscLpE1ChanTcRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.8.2.4.1.1
A single entry in the table represents a single mscLpE1ChanTc component.
OBJECT-TYPE    
  MscLpE1ChanTcRowStatusEntry  

mscLpE1ChanTcRowStatus 1.3.6.1.4.1.562.36.2.1.12.8.2.4.1.1.1
This variable is used as the basis for SNMP naming of mscLpE1ChanTc components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscLpE1ChanTcComponentName 1.3.6.1.4.1.562.36.2.1.12.8.2.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpE1ChanTcStorageType 1.3.6.1.4.1.562.36.2.1.12.8.2.4.1.1.4
This variable represents the storage type value for the mscLpE1ChanTc tables.
OBJECT-TYPE    
  StorageType  

mscLpE1ChanTcIndex 1.3.6.1.4.1.562.36.2.1.12.8.2.4.1.1.10
This variable represents the index for the mscLpE1ChanTc tables.
OBJECT-TYPE    
  NonReplicated  

mscLpE1ChanTcProvTable 1.3.6.1.4.1.562.36.2.1.12.8.2.4.10
This group contains all specific provisioning data for a Tc component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1ChanTcProvEntry

mscLpE1ChanTcProvEntry 1.3.6.1.4.1.562.36.2.1.12.8.2.4.10.1
An entry in the mscLpE1ChanTcProvTable.
OBJECT-TYPE    
  MscLpE1ChanTcProvEntry  

mscLpE1ChanTcReplacementData 1.3.6.1.4.1.562.36.2.1.12.8.2.4.10.1.1
This attribute specifies the trunk conditioning data byte to be substituted into the timeslots defined by the Chan component under fault conditions. replacementData can be set to any two digit hexadecimal number. The following are recommended values: DS1 MUX Out Of Service Code = 0x1A E1 MUX Out Of Service Code = 0xFF
OBJECT-TYPE    
  Hex 0..255  

mscLpE1ChanTcSignalOneDuration 1.3.6.1.4.1.562.36.2.1.12.8.2.4.10.1.2
This attribute specifies the time duration in seconds for which signalOne is substituted into the appropriate signaling bits, when a lineType that uses CAS has been defined. When signalOneDuration has expired signalTwo is substituted into the appropriate signaling bits. If signalOneDuration is set to zero then only signalTwo is substituted into the appropriate signaling bits during error conditions. signalOneDuration can be set to any integer value from 0 to 60 seconds.
OBJECT-TYPE    
  Unsigned32 0..60  

mscLpE1ChanTcOpTable 1.3.6.1.4.1.562.36.2.1.12.8.2.4.11
This group contains all specific operational data for a Tc component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1ChanTcOpEntry

mscLpE1ChanTcOpEntry 1.3.6.1.4.1.562.36.2.1.12.8.2.4.11.1
An entry in the mscLpE1ChanTcOpTable.
OBJECT-TYPE    
  MscLpE1ChanTcOpEntry  

mscLpE1ChanTcIngressConditioning 1.3.6.1.4.1.562.36.2.1.12.8.2.4.11.1.1
This attribute indicates the status of locally generated trunk conditioning towards the ATM network. When trunk conditioning is being locally generated towards the ATM network, ingressConditioning is set to on. When trunk conditioning is not being locally generated towards the ATM network, ingressConditioning is set to off. Trunk conditioning is transmitted towards the ATM network under the following conditions: lossOfSignal (LOS) lossOfFrame (LOF) remoteAlarmIndication (RAI) alarmIndicationSignal (AIS) bufferUnderflow (BU) and in addition for E1: lossOfMultiframe (LOMF) receiveMultiframeRemoteAlarmIndication (RMRAI)
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscLpE1ChanTcEgressConditioning 1.3.6.1.4.1.562.36.2.1.12.8.2.4.11.1.2
This attribute indicates the status of locally generated trunk conditioning towards the PDH line. When trunk conditioning is being locally generated towards the PDH line, egressConditioning is set to on. When trunk conditioning is not being locally generated towards the PDH line, egressConditioning is set to off. Trunk conditioning is transmitted towards the PDH line under the following conditions: bufferUnderflow (BU) AAL1 protocol errors.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscLpE1ChanTcSigOneTable 1.3.6.1.4.1.562.36.2.1.12.8.2.4.398
This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted for the duration provisioned in signalOneDuration when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1ChanTcSigOneEntry

mscLpE1ChanTcSigOneEntry 1.3.6.1.4.1.562.36.2.1.12.8.2.4.398.1
An entry in the mscLpE1ChanTcSigOneTable.
OBJECT-TYPE    
  MscLpE1ChanTcSigOneEntry  

mscLpE1ChanTcSigOneIndex 1.3.6.1.4.1.562.36.2.1.12.8.2.4.398.1.1
This variable represents the mscLpE1ChanTcSigOneTable specific index for the mscLpE1ChanTcSigOneTable.
OBJECT-TYPE    
  INTEGER d(0), c(1), b(2), a(3)  

mscLpE1ChanTcSigOneValue 1.3.6.1.4.1.562.36.2.1.12.8.2.4.398.1.2
This variable represents an individual value for the mscLpE1ChanTcSigOneTable.
OBJECT-TYPE    
  Unsigned32 0..1  

mscLpE1ChanTcSigTwoTable 1.3.6.1.4.1.562.36.2.1.12.8.2.4.399
This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted after the duration provisioned in signalOneDuration has expired and when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1ChanTcSigTwoEntry

mscLpE1ChanTcSigTwoEntry 1.3.6.1.4.1.562.36.2.1.12.8.2.4.399.1
An entry in the mscLpE1ChanTcSigTwoTable.
OBJECT-TYPE    
  MscLpE1ChanTcSigTwoEntry  

mscLpE1ChanTcSigTwoIndex 1.3.6.1.4.1.562.36.2.1.12.8.2.4.399.1.1
This variable represents the mscLpE1ChanTcSigTwoTable specific index for the mscLpE1ChanTcSigTwoTable.
OBJECT-TYPE    
  INTEGER d(0), c(1), b(2), a(3)  

mscLpE1ChanTcSigTwoValue 1.3.6.1.4.1.562.36.2.1.12.8.2.4.399.1.2
This variable represents an individual value for the mscLpE1ChanTcSigTwoTable.
OBJECT-TYPE    
  Unsigned32 0..1  

mscLpE1ChanFlm 1.3.6.1.4.1.562.36.2.1.12.8.2.5
OBJECT IDENTIFIER    

mscLpE1ChanFlmRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.8.2.5.1
This entry controls the addition and deletion of mscLpE1ChanFlm components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1ChanFlmRowStatusEntry

mscLpE1ChanFlmRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.8.2.5.1.1
A single entry in the table represents a single mscLpE1ChanFlm component.
OBJECT-TYPE    
  MscLpE1ChanFlmRowStatusEntry  

mscLpE1ChanFlmRowStatus 1.3.6.1.4.1.562.36.2.1.12.8.2.5.1.1.1
This variable is used as the basis for SNMP naming of mscLpE1ChanFlm components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscLpE1ChanFlmComponentName 1.3.6.1.4.1.562.36.2.1.12.8.2.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpE1ChanFlmStorageType 1.3.6.1.4.1.562.36.2.1.12.8.2.5.1.1.4
This variable represents the storage type value for the mscLpE1ChanFlm tables.
OBJECT-TYPE    
  StorageType  

mscLpE1ChanFlmIndex 1.3.6.1.4.1.562.36.2.1.12.8.2.5.1.1.10
This variable represents the index for the mscLpE1ChanFlm tables.
OBJECT-TYPE    
  NonReplicated  

mscLpE1ChanFlmProvTable 1.3.6.1.4.1.562.36.2.1.12.8.2.5.10
This group contains all specific provisioning data for an Flm component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1ChanFlmProvEntry

mscLpE1ChanFlmProvEntry 1.3.6.1.4.1.562.36.2.1.12.8.2.5.10.1
An entry in the mscLpE1ChanFlmProvTable.
OBJECT-TYPE    
  MscLpE1ChanFlmProvEntry  

mscLpE1ChanFlmABitMonitoring 1.3.6.1.4.1.562.36.2.1.12.8.2.5.10.1.1
This attribute controls the monitoring of A-bit defects.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpE1ChanFlmHdlcMonitoring 1.3.6.1.4.1.562.36.2.1.12.8.2.5.10.1.2
This attribute controls the monitoring of HDLC defect.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpE1ChanFlmOpTable 1.3.6.1.4.1.562.36.2.1.12.8.2.5.11
This group contains all specific operational data for an Flm component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1ChanFlmOpEntry

mscLpE1ChanFlmOpEntry 1.3.6.1.4.1.562.36.2.1.12.8.2.5.11.1
An entry in the mscLpE1ChanFlmOpTable.
OBJECT-TYPE    
  MscLpE1ChanFlmOpEntry  

mscLpE1ChanFlmFlmStatus 1.3.6.1.4.1.562.36.2.1.12.8.2.5.11.1.1
This attribute indicates the status of a Frame Relay channel on an E1 line. By combining the E1 channel-associated-signalling (CAS) A-bits status, and HDLC defect, a single value indicates the likely cause of the failure. This mechanism assumes that the far end equipment loops back signaling A-bits for some or all of the timeslots in a channel. The A-bits in channel are transmitted as '0'. If they are all received as '0', it is assumed that the E1 link is up in both directions. The presence of HDLC frames indicates that the service is connected. When A-bits and HDLC frames are correctly received, frameLinkUp is indicated. When neither are received, frameLinkDown is indicated. When HDLC frames are not receive but A-bits are not at fault, lossOfHdlc is indicated. When HDLC frames are received, but there is a fault in the any of timeslot's A-bits on a channel lossOfAbit is indicated.
OBJECT-TYPE    
  INTEGER notMonitoring(0), frameLinkUp(1), frameLinkDown(2), lossOfHdlc(3), lossOfAbit(4)  

mscLpE1ChanProvTable 1.3.6.1.4.1.562.36.2.1.12.8.2.10
This group contains all of the provisional data for a Channel component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1ChanProvEntry

mscLpE1ChanProvEntry 1.3.6.1.4.1.562.36.2.1.12.8.2.10.1
An entry in the mscLpE1ChanProvTable.
OBJECT-TYPE    
  MscLpE1ChanProvEntry  

mscLpE1ChanTimeslots 1.3.6.1.4.1.562.36.2.1.12.8.2.10.1.1
This attribute contains the list of timeslots that are used by the Channel component. Valid numbers are 1-24 for a Channel used by a DS1 component, and 1-31 for a Channel used by an E1 component. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) n29(29) n30(30) n31(31)
OBJECT-TYPE    
  OCTET STRING SIZE(4)  

mscLpE1ChanTimeslotDataRate 1.3.6.1.4.1.562.36.2.1.12.8.2.10.1.2
This attribute selects the data rate of the timeslots in a channel of a DS1 component. For E1, the data rate of the timeslots will always be 64kbit/s regardless of this attribute. When doNotOverride is selected for a channel on a DS1, the data rate of the channel's timeslots are dependant on the zeroCoding selection of the DS1 component. If the zeroCoding is B8ZS (where supported on the FP) or none, the timeslot's data rate will be 64kbit/ s. If the zeroCoding option is bit7Stuffing, the data rate of a timeslot will be 56kbit/s. When 56k is selected for a channel on a DS1, the least significant bit of each timeslot of this Channel will always be set to 1 and not used for data. The data rate for the timeslots of this channel is therefore restricted to 56kbit/s. One application of this attribute is to allow a DS1 line to support mixing channels that originate from lines that use different zeroCoding schemes.
OBJECT-TYPE    
  INTEGER n56k(0), doNotOverride(1)  

mscLpE1ChanApplicationFramerName 1.3.6.1.4.1.562.36.2.1.12.8.2.10.1.3
This attribute defines the link to the software stack. It defines which application is running on top of this hardware component.
OBJECT-TYPE    
  Link  

mscLpE1ChanCidDataTable 1.3.6.1.4.1.562.36.2.1.12.8.2.11
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1ChanCidDataEntry

mscLpE1ChanCidDataEntry 1.3.6.1.4.1.562.36.2.1.12.8.2.11.1
An entry in the mscLpE1ChanCidDataTable.
OBJECT-TYPE    
  MscLpE1ChanCidDataEntry  

mscLpE1ChanCustomerIdentifier 1.3.6.1.4.1.562.36.2.1.12.8.2.11.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

mscLpE1ChanIfEntryTable 1.3.6.1.4.1.562.36.2.1.12.8.2.12
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1ChanIfEntryEntry

mscLpE1ChanIfEntryEntry 1.3.6.1.4.1.562.36.2.1.12.8.2.12.1
An entry in the mscLpE1ChanIfEntryTable.
OBJECT-TYPE    
  MscLpE1ChanIfEntryEntry  

mscLpE1ChanIfAdminStatus 1.3.6.1.4.1.562.36.2.1.12.8.2.12.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpE1ChanIfIndex 1.3.6.1.4.1.562.36.2.1.12.8.2.12.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscLpE1ChanOperStatusTable 1.3.6.1.4.1.562.36.2.1.12.8.2.13
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1ChanOperStatusEntry

mscLpE1ChanOperStatusEntry 1.3.6.1.4.1.562.36.2.1.12.8.2.13.1
An entry in the mscLpE1ChanOperStatusTable.
OBJECT-TYPE    
  MscLpE1ChanOperStatusEntry  

mscLpE1ChanSnmpOperStatus 1.3.6.1.4.1.562.36.2.1.12.8.2.13.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpE1ChanStateTable 1.3.6.1.4.1.562.36.2.1.12.8.2.14
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1ChanStateEntry

mscLpE1ChanStateEntry 1.3.6.1.4.1.562.36.2.1.12.8.2.14.1
An entry in the mscLpE1ChanStateTable.
OBJECT-TYPE    
  MscLpE1ChanStateEntry  

mscLpE1ChanAdminState 1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscLpE1ChanOperationalState 1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpE1ChanUsageState 1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscLpE1ChanAvailabilityStatus 1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

mscLpE1ChanProceduralStatus 1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpE1ChanControlStatus 1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpE1ChanAlarmStatus 1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpE1ChanStandbyStatus 1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

mscLpE1ChanUnknownStatus 1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

mscLpE1ChanOperTable 1.3.6.1.4.1.562.36.2.1.12.8.2.15
This group contains all of the operational data for a Channel component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1ChanOperEntry

mscLpE1ChanOperEntry 1.3.6.1.4.1.562.36.2.1.12.8.2.15.1
An entry in the mscLpE1ChanOperTable.
OBJECT-TYPE    
  MscLpE1ChanOperEntry  

mscLpE1ChanActualChannelSpeed 1.3.6.1.4.1.562.36.2.1.12.8.2.15.1.1
This attribute displays the measured link speed of the Channel component.
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscLpE1ChanAdminInfoTable 1.3.6.1.4.1.562.36.2.1.12.8.2.16
This group contains the attributes pertaining to the vendor of the equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1ChanAdminInfoEntry

mscLpE1ChanAdminInfoEntry 1.3.6.1.4.1.562.36.2.1.12.8.2.16.1
An entry in the mscLpE1ChanAdminInfoTable.
OBJECT-TYPE    
  MscLpE1ChanAdminInfoEntry  

mscLpE1ChanVendor 1.3.6.1.4.1.562.36.2.1.12.8.2.16.1.1
This is the name of the vendor supplying the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..20)  

mscLpE1ChanCommentText 1.3.6.1.4.1.562.36.2.1.12.8.2.16.1.2
Any miscellaneous text about the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..60)  

mscLpE1Test 1.3.6.1.4.1.562.36.2.1.12.8.3
OBJECT IDENTIFIER    

mscLpE1TestRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.8.3.1
This entry controls the addition and deletion of mscLpE1Test components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1TestRowStatusEntry

mscLpE1TestRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.8.3.1.1
A single entry in the table represents a single mscLpE1Test component.
OBJECT-TYPE    
  MscLpE1TestRowStatusEntry  

mscLpE1TestRowStatus 1.3.6.1.4.1.562.36.2.1.12.8.3.1.1.1
This variable is used as the basis for SNMP naming of mscLpE1Test components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscLpE1TestComponentName 1.3.6.1.4.1.562.36.2.1.12.8.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpE1TestStorageType 1.3.6.1.4.1.562.36.2.1.12.8.3.1.1.4
This variable represents the storage type value for the mscLpE1Test tables.
OBJECT-TYPE    
  StorageType  

mscLpE1TestIndex 1.3.6.1.4.1.562.36.2.1.12.8.3.1.1.10
This variable represents the index for the mscLpE1Test tables.
OBJECT-TYPE    
  NonReplicated  

mscLpE1TestStateTable 1.3.6.1.4.1.562.36.2.1.12.8.3.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1TestStateEntry

mscLpE1TestStateEntry 1.3.6.1.4.1.562.36.2.1.12.8.3.10.1
An entry in the mscLpE1TestStateTable.
OBJECT-TYPE    
  MscLpE1TestStateEntry  

mscLpE1TestAdminState 1.3.6.1.4.1.562.36.2.1.12.8.3.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscLpE1TestOperationalState 1.3.6.1.4.1.562.36.2.1.12.8.3.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpE1TestUsageState 1.3.6.1.4.1.562.36.2.1.12.8.3.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscLpE1TestSetupTable 1.3.6.1.4.1.562.36.2.1.12.8.3.11
This group contains all of the operational data for a Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1TestSetupEntry

mscLpE1TestSetupEntry 1.3.6.1.4.1.562.36.2.1.12.8.3.11.1
An entry in the mscLpE1TestSetupTable.
OBJECT-TYPE    
  MscLpE1TestSetupEntry  

mscLpE1TestPurpose 1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.1
This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
OBJECT-TYPE    
  AsciiString SIZE(0..40)  

mscLpE1TestType 1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.2
This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
OBJECT-TYPE    
  INTEGER card(0), manual(1), localLoop(2), remoteLoop(3), externalLoop(4), payloadLoop(5), remoteLoopThisTrib(6), v54RemoteLoop(7), pn127RemoteLoop(8)  

mscLpE1TestFrmSize 1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.3
This attribute defines the size of the test data frames in number of bytes.
OBJECT-TYPE    
  Unsigned32 4..4096  

mscLpE1TestFrmPatternType 1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.4
This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
OBJECT-TYPE    
  INTEGER ccitt32kBitPattern(0), ccitt8MBitPattern(1), customizedPattern(2)  

mscLpE1TestCustomizedPattern 1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.5
This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
OBJECT-TYPE    
  Hex 0..4294967295  

mscLpE1TestDataStartDelay 1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.6
This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
OBJECT-TYPE    
  Unsigned32 0..1814400  

mscLpE1TestDisplayInterval 1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.7
This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
OBJECT-TYPE    
  Unsigned32 0..30240  

mscLpE1TestDuration 1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.8
This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
OBJECT-TYPE    
  Unsigned32 1..30240  

mscLpE1TestResultsTable 1.3.6.1.4.1.562.36.2.1.12.8.3.12
This group contains all the statistics related attributes of the Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1TestResultsEntry

mscLpE1TestResultsEntry 1.3.6.1.4.1.562.36.2.1.12.8.3.12.1
An entry in the mscLpE1TestResultsTable.
OBJECT-TYPE    
  MscLpE1TestResultsEntry  

mscLpE1TestElapsedTime 1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.1
This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
OBJECT-TYPE    
  Counter32  

mscLpE1TestTimeRemaining 1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.2
This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscLpE1TestCauseOfTermination 1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.3
This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4), hardwareReconfigured(5), loopCodeSyncFailed(6), patternSyncFailed(7), patternSyncLost(8)  

mscLpE1TestBitsTx 1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.4
This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpE1TestBytesTx 1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.5
This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpE1TestFrmTx 1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.6
This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpE1TestBitsRx 1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.7
This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpE1TestBytesRx 1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.8
This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpE1TestFrmRx 1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.9
This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpE1TestErroredFrmRx 1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.10
This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpE1TestBitErrorRate 1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.11
This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
OBJECT-TYPE    
  AsciiString SIZE(5)  

mscLpE1Dsp 1.3.6.1.4.1.562.36.2.1.12.8.4
OBJECT IDENTIFIER    

mscLpE1DspRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.8.4.1
This entry controls the addition and deletion of mscLpE1Dsp components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1DspRowStatusEntry

mscLpE1DspRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.8.4.1.1
A single entry in the table represents a single mscLpE1Dsp component.
OBJECT-TYPE    
  MscLpE1DspRowStatusEntry  

mscLpE1DspRowStatus 1.3.6.1.4.1.562.36.2.1.12.8.4.1.1.1
This variable is used as the basis for SNMP naming of mscLpE1Dsp components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscLpE1DspComponentName 1.3.6.1.4.1.562.36.2.1.12.8.4.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpE1DspStorageType 1.3.6.1.4.1.562.36.2.1.12.8.4.1.1.4
This variable represents the storage type value for the mscLpE1Dsp tables.
OBJECT-TYPE    
  StorageType  

mscLpE1DspIndex 1.3.6.1.4.1.562.36.2.1.12.8.4.1.1.10
This variable represents the index for the mscLpE1Dsp tables.
OBJECT-TYPE    
  NonReplicated  

mscLpE1Audio 1.3.6.1.4.1.562.36.2.1.12.8.5
OBJECT IDENTIFIER    

mscLpE1AudioRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.8.5.1
This entry controls the addition and deletion of mscLpE1Audio components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1AudioRowStatusEntry

mscLpE1AudioRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.8.5.1.1
A single entry in the table represents a single mscLpE1Audio component.
OBJECT-TYPE    
  MscLpE1AudioRowStatusEntry  

mscLpE1AudioRowStatus 1.3.6.1.4.1.562.36.2.1.12.8.5.1.1.1
This variable is used as the basis for SNMP naming of mscLpE1Audio components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscLpE1AudioComponentName 1.3.6.1.4.1.562.36.2.1.12.8.5.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpE1AudioStorageType 1.3.6.1.4.1.562.36.2.1.12.8.5.1.1.4
This variable represents the storage type value for the mscLpE1Audio tables.
OBJECT-TYPE    
  StorageType  

mscLpE1AudioIndex 1.3.6.1.4.1.562.36.2.1.12.8.5.1.1.10
This variable represents the index for the mscLpE1Audio tables.
OBJECT-TYPE    
  NonReplicated  

mscLpE1ProvTable 1.3.6.1.4.1.562.36.2.1.12.8.10
This group contains all of the provisioning data for an E1 component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1ProvEntry

mscLpE1ProvEntry 1.3.6.1.4.1.562.36.2.1.12.8.10.1
An entry in the mscLpE1ProvTable.
OBJECT-TYPE    
  MscLpE1ProvEntry  

mscLpE1LineType 1.3.6.1.4.1.562.36.2.1.12.8.10.1.1
This attribute specifies the framing of the E1 line. When cas (channel associated signalling) is selected, timeslot 16 is reserved for multiframe signalling and only 30 timeslots are available for data. The signalling bits are not interpreted. When ccs (common channel signalling) is selected, timeslot 16 is not reserved for multiframe signalling and 31 timeslots are available for data. The signalling bits are not interpreted. When unframed is selected, a clear channel is defined whereby data from all timeslots including the framing data (in timeslot 0) and timeslot 16 are passed transparently. This value is valid only for AAL1 cards. For cell-based cards the ATM Forum specifies that timeslot 16 be reserved, leaving 30 timeslots available for data. The default value is cas except for the 8pE1Atm card, for which the default and only valid value is ccs.
OBJECT-TYPE    
  INTEGER ccs(2), cas(3), unframed(6)  

mscLpE1ClockingSource 1.3.6.1.4.1.562.36.2.1.12.8.10.1.2
This attribute defines the source of the transmit clock for the E1 line. When local is selected, the crystal on the port generates the clocking for the line. When line is selected, the port synchronizes to the clock from the facility. When module is selected, the ports clock synchronizes to the clock provided by the oscillator on the active CP. When otherPort is selected, the port synchronizes to the port with a clocking source of line. When srtsMode is selected, the port transmit frequency depends on the SRTS (Synchronous Residual Time-Stamp) received over the ATM network. SRTS information is also generated sent over the ATM network. When adaptiveMode is selected, the port transmit frequency continually adapts to match the egress data received from the ATM network. A port with srtsMode or adaptiveMode must have a single Chan which may be linked only to an Aal1Ces.service with serviceType unstructured If the NetworkSynchronization component is present, the default value of this attribute is module, otherwise it defaults to line, except for the 3pE1Atm card, which it defaults to local. On a 3pE1Atm card all ports must have the same value, and be either local or module. otherPort is valid only on AAL1 cards. srtsMode is valid only on AAL1 and Multi-Service Access cards. adaptiveMode is valid only on Multi-Service Access cards. On 4E1Aal1 cards either: all four ports' clockingSource values must be local OR all four ports' clockingSource values must be module OR one port's clockingSource value must be line and the other three must be otherPort. A port can only have srtsMode selected if the other ports are module or srtsMode.
OBJECT-TYPE    
  INTEGER local(0), line(1), module(2), otherPort(3), srtsMode(4), adaptiveMode(5)  

mscLpE1Crc4Mode 1.3.6.1.4.1.562.36.2.1.12.8.10.1.3
This attribute defines whether the CRC-4 checking and generation on the E1 line is enabled or disabled. The default CRC-4 mode is off except for the cell-based cards which default to on as per the ATM Forum.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpE1SendRaiOnAis 1.3.6.1.4.1.562.36.2.1.12.8.10.1.4
This attribute defines whether the Remote Alarm Indicator (RAI) will be sent when receiving an AIS alarm. The value is yes by default; it can be changed to no only for ports on J2MV cards.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscLpE1RaiDeclareAlarmTime 1.3.6.1.4.1.562.36.2.1.12.8.10.1.5
This attribute specifies the period of time that a Remote Alarm Indicator (RAI) must be present before declaring an RAI alarm. The value of auto sets the RAI declare time to the default value for E1 and E1C card types which do not have hardware support for RAI response. On E1C card types with hardware support, if the value of auto is set, RAI response is done according to the standards. If auto is set, the value of the raiClearAlarmTime attribute is ignored and auto is used. This attribute is for E1 and E1C card types only. For all other card types, the default value must be used. VALUES ( 0 = auto )
OBJECT-TYPE    
  Unsigned32 0 | 1..20000  

mscLpE1RaiClearAlarmTime 1.3.6.1.4.1.562.36.2.1.12.8.10.1.6
This attribute specifies the period of time that a Remote Alarm Indicator (RAI) has been absent before clearing an RAI alarm. The value of auto sets the RAI clear time to the default value for E1 and E1C card types which do not have hardware support for RAI response. On E1C card types with hardware support, if the value of auto is set, RAI response is done according to the standards. If auto is set, the value of the raiDeclareAlarmTime attribute is ignored and auto is used. This attribute is for E1 and E1C card types only. For all other card types, the default value must be used. VALUES ( 0 = auto )
OBJECT-TYPE    
  Unsigned32 0 | 1..20000  

mscLpE1CidDataTable 1.3.6.1.4.1.562.36.2.1.12.8.11
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1CidDataEntry

mscLpE1CidDataEntry 1.3.6.1.4.1.562.36.2.1.12.8.11.1
An entry in the mscLpE1CidDataTable.
OBJECT-TYPE    
  MscLpE1CidDataEntry  

mscLpE1CustomerIdentifier 1.3.6.1.4.1.562.36.2.1.12.8.11.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

mscLpE1AdminInfoTable 1.3.6.1.4.1.562.36.2.1.12.8.12
This group contains the attributes pertaining to the vendor of the equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1AdminInfoEntry

mscLpE1AdminInfoEntry 1.3.6.1.4.1.562.36.2.1.12.8.12.1
An entry in the mscLpE1AdminInfoTable.
OBJECT-TYPE    
  MscLpE1AdminInfoEntry  

mscLpE1Vendor 1.3.6.1.4.1.562.36.2.1.12.8.12.1.1
This is the name of the vendor supplying the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..20)  

mscLpE1CommentText 1.3.6.1.4.1.562.36.2.1.12.8.12.1.2
Any miscellaneous text about the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..60)  

mscLpE1IfEntryTable 1.3.6.1.4.1.562.36.2.1.12.8.13
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1IfEntryEntry

mscLpE1IfEntryEntry 1.3.6.1.4.1.562.36.2.1.12.8.13.1
An entry in the mscLpE1IfEntryTable.
OBJECT-TYPE    
  MscLpE1IfEntryEntry  

mscLpE1IfAdminStatus 1.3.6.1.4.1.562.36.2.1.12.8.13.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpE1IfIndex 1.3.6.1.4.1.562.36.2.1.12.8.13.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscLpE1OperStatusTable 1.3.6.1.4.1.562.36.2.1.12.8.14
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1OperStatusEntry

mscLpE1OperStatusEntry 1.3.6.1.4.1.562.36.2.1.12.8.14.1
An entry in the mscLpE1OperStatusTable.
OBJECT-TYPE    
  MscLpE1OperStatusEntry  

mscLpE1SnmpOperStatus 1.3.6.1.4.1.562.36.2.1.12.8.14.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpE1StateTable 1.3.6.1.4.1.562.36.2.1.12.8.15
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1StateEntry

mscLpE1StateEntry 1.3.6.1.4.1.562.36.2.1.12.8.15.1
An entry in the mscLpE1StateTable.
OBJECT-TYPE    
  MscLpE1StateEntry  

mscLpE1AdminState 1.3.6.1.4.1.562.36.2.1.12.8.15.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscLpE1OperationalState 1.3.6.1.4.1.562.36.2.1.12.8.15.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpE1UsageState 1.3.6.1.4.1.562.36.2.1.12.8.15.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscLpE1AvailabilityStatus 1.3.6.1.4.1.562.36.2.1.12.8.15.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

mscLpE1ProceduralStatus 1.3.6.1.4.1.562.36.2.1.12.8.15.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpE1ControlStatus 1.3.6.1.4.1.562.36.2.1.12.8.15.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpE1AlarmStatus 1.3.6.1.4.1.562.36.2.1.12.8.15.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpE1StandbyStatus 1.3.6.1.4.1.562.36.2.1.12.8.15.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

mscLpE1UnknownStatus 1.3.6.1.4.1.562.36.2.1.12.8.15.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

mscLpE1OperTable 1.3.6.1.4.1.562.36.2.1.12.8.16
This group contains the common operational data for a component in a digital hierarchy interface.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1OperEntry

mscLpE1OperEntry 1.3.6.1.4.1.562.36.2.1.12.8.16.1
An entry in the mscLpE1OperTable.
OBJECT-TYPE    
  MscLpE1OperEntry  

mscLpE1LosAlarm 1.3.6.1.4.1.562.36.2.1.12.8.16.1.1
This attribute displays whether a LOS (Loss of Signal) alarm state has been entered. A LOS alarm is declared after LOS defects have been observed and accumulated for a period of 2 seconds +/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). A LOS defect is detected upon observing all zeros for 150 ms (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: upon observing 175 +/- 75 pulse positions with no pulses of either positive or negative polarity). If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOS alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOS alarm state. The LOS alarm state is cleared when LOS defects are absent for 10 seconds +/- 0.5 seconds.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpE1RxAisAlarm 1.3.6.1.4.1.562.36.2.1.12.8.16.1.2
This attribute displays whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/ - 0.5 seconds. An AIS defect is detected after having received less than 3 zeros in a 2048 bit period (for 8pDS1Atm cards: when both an Out Of Frame condition exists and a 1's density of at least 99.9% is present for a time T, where 3 ms T 75 ms; for 8pE1Atm cards: when both an Out Of Frame condition exists and fewer than three 0's have been received in 512 bit periods). If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled for the duration of an AIS alarm state. The AIS alarm state is cleared when AIS defects are absent for 10 seconds +/- 0.5 seconds.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpE1LofAlarm 1.3.6.1.4.1.562.36.2.1.12.8.16.1.3
This attribute displays whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defects (for DS1: 2 out of 5 framing bits in error; for E1: 3 consecutive frame alignment patterns in error) have been detected for 3 seconds +/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOF alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOF alarm state The condition is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpE1RxRaiAlarm 1.3.6.1.4.1.562.36.2.1.12.8.16.1.4
This attribute displays whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered when the RAI defect indicator has been observed and accumulated for 3.5 seconds +/- 0.5 seconds. For 3pDS1Atm, and 8pDS1Atm cards: alarm is declared immediately upon observing the defect is present, with no integration time. For 3pE1Atm, and 8pE1Atm cards: alarm state is entered when the RAI defect indicator has been observed and accumulated for 2.5 seconds +/- 0.5 seconds. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The RAI alarm state is cleared when the RAI defect indicator has been absent for 10 seconds +/- 0.5 seconds (for 3pDS1Atm, and 8pDS1Atm cards: alarm is cleared immediately upon observing the defect is absent, with no integration time). The RAI alarm is usually an indication that the far end facility is unable to gain synchronization.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpE1TxAisAlarm 1.3.6.1.4.1.562.36.2.1.12.8.16.1.5
This attribute displays whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transmitted when the port is in a locked state.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpE1TxRaiAlarm 1.3.6.1.4.1.562.36.2.1.12.8.16.1.6
This attribute displays whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the port detects a LOF alarm condition (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: RAI is transmitted when the port detects a LOS, LOF, or AIS condition).
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpE1E1OperTable 1.3.6.1.4.1.562.36.2.1.12.8.17
This group contains all of the operational data for a E1 component that are not defined in the DSCommonOp group.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1E1OperEntry

mscLpE1E1OperEntry 1.3.6.1.4.1.562.36.2.1.12.8.17.1
An entry in the mscLpE1E1OperTable.
OBJECT-TYPE    
  MscLpE1E1OperEntry  

mscLpE1MultifrmLofAlarm 1.3.6.1.4.1.562.36.2.1.12.8.17.1.1
This attribute indicates whether a multiframe LOF (loss of frame) alarm state is entered. A multiframe LOF alarm state is entered when a multiframe LOF defect (2 consecutive errors in the multiframe alignment signal) has been detected and accumulated for 2.5 seconds +/- 0.5 seconds. If the multiframe LOF defects are intermittently occurring, the multiframe LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The alarm is cleared when the defect is not detected for 10 seconds +/- 0.5 seconds. When the multiframe LOF alarm is on, a multiframe RAI alarm indicator is transmitted on the line. The 8pE1Atm card does not support the multiframe LOF alarm.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpE1RxMultifrmRaiAlarm 1.3.6.1.4.1.562.36.2.1.12.8.17.1.2
This attribute displays whether a multiframe RAI (remote alarm indicator) alarm state has been entered. A multiframe RAI alarm state is entered when a multiframe RAI alarm indicator (bit 6 of timeslot 16 in frame 0 is set to a one) is observed and accumulated for 2.5 seconds +/- 0.5 seconds. If the multiframe RAI indicator is intermittently received, the multiframe RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The multiframe RAI alarm condition is cleared when the multiframe RAI alarm indication is not received for 10 seconds +/- 0.5 seconds. The multiframe RAI alarm is usually an indication that the far end facility is unable to gain multiframe synchronization. The 8pE1Atm card does not support the multiframe RAI alarm.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpE1TxMultifrmRaiAlarm 1.3.6.1.4.1.562.36.2.1.12.8.17.1.3
This attribute displays whether a multiframe RAI (remote alarm indicator) alarm is being sent on the E1 line. This is transmitted when the E1 port detects a multiframe LOF condition. The 8pE1Atm card does not generate the multiframe RAI alarm.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpE1StatsTable 1.3.6.1.4.1.562.36.2.1.12.8.18
This group contains the common statistical data for a component in a digital hierarchy interface.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpE1StatsEntry

mscLpE1StatsEntry 1.3.6.1.4.1.562.36.2.1.12.8.18.1
An entry in the mscLpE1StatsTable.
OBJECT-TYPE    
  MscLpE1StatsEntry  

mscLpE1RunningTime 1.3.6.1.4.1.562.36.2.1.12.8.18.1.1
The number of seconds since the port component was activated.
OBJECT-TYPE    
  Counter32  

mscLpE1ErrorFreeSec 1.3.6.1.4.1.562.36.2.1.12.8.18.1.2
The number of seconds that the port has been in an error free state.
OBJECT-TYPE    
  Counter32  

mscLpE1ErroredSec 1.3.6.1.4.1.562.36.2.1.12.8.18.1.3
An errored second is declared when a second with one or more Code Violation Error events, or one or more Out Of Frame events occurs. A code violation error may be a CRC error or a BPV error. An Out Of Frame event occurs when 2 out of 5 framing bits are in error.
OBJECT-TYPE    
  Counter32  

mscLpE1SevErroredSec 1.3.6.1.4.1.562.36.2.1.12.8.18.1.4
A severely errored second occurs when a second with 320 or more Code Violation Error events or one or more Out Of Frame events occurs.
OBJECT-TYPE    
  Counter32  

mscLpE1SevErroredFrmSec 1.3.6.1.4.1.562.36.2.1.12.8.18.1.5
A severely errored framing second occurs when a second with one or more Out Of Frame events occurs.
OBJECT-TYPE    
  Counter32  

mscLpE1UnavailSec 1.3.6.1.4.1.562.36.2.1.12.8.18.1.6
The total number of seconds that the interface is in an unavailable signal state. An unavailable signal state occurs at the onset of 10 consecutive Severely Errored Seconds. The state is cleared at the onset of 10 seconds with no Severely Errored Seconds.
OBJECT-TYPE    
  Counter32  

mscLpE1BpvErrors 1.3.6.1.4.1.562.36.2.1.12.8.18.1.7
The current count of Bipolar Violations. A bipolar violation is an error in the alternate mark inversion pattern (AMI) on the line.
OBJECT-TYPE    
  Counter32  

mscLpE1CrcErrors 1.3.6.1.4.1.562.36.2.1.12.8.18.1.8
If the interface is a DS1 line, it is the current count of CRC-6 errors. These will only be counted when the lineType is ESF. If the interface is an E1 line, it is the total number of CRC-4 errors. These will only be counted when crc4Mode is on.
OBJECT-TYPE    
  Counter32  

mscLpE1FrmErrors 1.3.6.1.4.1.562.36.2.1.12.8.18.1.9
The current count of frame errors. A frame error is an error in the framing bits
OBJECT-TYPE    
  Counter32  

mscLpE1LosStateChanges 1.3.6.1.4.1.562.36.2.1.12.8.18.1.10
The total number of times that the line lost signal.
OBJECT-TYPE    
  Counter32  

mscLpE1SlipErrors 1.3.6.1.4.1.562.36.2.1.12.8.18.1.11
The total number of times that the line experienced a controlled frame slip. This attribute is incremented for ports on the voice cards (for example the 1pDS1V and the 1pE1V function processors) only.
OBJECT-TYPE    
  Counter32  

mscLpV35 1.3.6.1.4.1.562.36.2.1.12.9
OBJECT IDENTIFIER    

mscLpV35RowStatusTable 1.3.6.1.4.1.562.36.2.1.12.9.1
This entry controls the addition and deletion of mscLpV35 components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpV35RowStatusEntry

mscLpV35RowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.9.1.1
A single entry in the table represents a single mscLpV35 component.
OBJECT-TYPE    
  MscLpV35RowStatusEntry  

mscLpV35RowStatus 1.3.6.1.4.1.562.36.2.1.12.9.1.1.1
This variable is used as the basis for SNMP naming of mscLpV35 components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscLpV35ComponentName 1.3.6.1.4.1.562.36.2.1.12.9.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpV35StorageType 1.3.6.1.4.1.562.36.2.1.12.9.1.1.4
This variable represents the storage type value for the mscLpV35 tables.
OBJECT-TYPE    
  StorageType  

mscLpV35Index 1.3.6.1.4.1.562.36.2.1.12.9.1.1.10
This variable represents the index for the mscLpV35 tables.
OBJECT-TYPE    
  Integer32 0..7  

mscLpV35Test 1.3.6.1.4.1.562.36.2.1.12.9.2
OBJECT IDENTIFIER    

mscLpV35TestRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.9.2.1
This entry controls the addition and deletion of mscLpV35Test components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpV35TestRowStatusEntry

mscLpV35TestRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.9.2.1.1
A single entry in the table represents a single mscLpV35Test component.
OBJECT-TYPE    
  MscLpV35TestRowStatusEntry  

mscLpV35TestRowStatus 1.3.6.1.4.1.562.36.2.1.12.9.2.1.1.1
This variable is used as the basis for SNMP naming of mscLpV35Test components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscLpV35TestComponentName 1.3.6.1.4.1.562.36.2.1.12.9.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpV35TestStorageType 1.3.6.1.4.1.562.36.2.1.12.9.2.1.1.4
This variable represents the storage type value for the mscLpV35Test tables.
OBJECT-TYPE    
  StorageType  

mscLpV35TestIndex 1.3.6.1.4.1.562.36.2.1.12.9.2.1.1.10
This variable represents the index for the mscLpV35Test tables.
OBJECT-TYPE    
  NonReplicated  

mscLpV35TestStateTable 1.3.6.1.4.1.562.36.2.1.12.9.2.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpV35TestStateEntry

mscLpV35TestStateEntry 1.3.6.1.4.1.562.36.2.1.12.9.2.10.1
An entry in the mscLpV35TestStateTable.
OBJECT-TYPE    
  MscLpV35TestStateEntry  

mscLpV35TestAdminState 1.3.6.1.4.1.562.36.2.1.12.9.2.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscLpV35TestOperationalState 1.3.6.1.4.1.562.36.2.1.12.9.2.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpV35TestUsageState 1.3.6.1.4.1.562.36.2.1.12.9.2.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscLpV35TestSetupTable 1.3.6.1.4.1.562.36.2.1.12.9.2.11
This group contains all of the operational data for a Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpV35TestSetupEntry

mscLpV35TestSetupEntry 1.3.6.1.4.1.562.36.2.1.12.9.2.11.1
An entry in the mscLpV35TestSetupTable.
OBJECT-TYPE    
  MscLpV35TestSetupEntry  

mscLpV35TestPurpose 1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.1
This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
OBJECT-TYPE    
  AsciiString SIZE(0..40)  

mscLpV35TestType 1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.2
This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
OBJECT-TYPE    
  INTEGER card(0), manual(1), localLoop(2), remoteLoop(3), externalLoop(4), payloadLoop(5), remoteLoopThisTrib(6), v54RemoteLoop(7), pn127RemoteLoop(8)  

mscLpV35TestFrmSize 1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.3
This attribute defines the size of the test data frames in number of bytes.
OBJECT-TYPE    
  Unsigned32 4..4096  

mscLpV35TestFrmPatternType 1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.4
This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
OBJECT-TYPE    
  INTEGER ccitt32kBitPattern(0), ccitt8MBitPattern(1), customizedPattern(2)  

mscLpV35TestCustomizedPattern 1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.5
This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
OBJECT-TYPE    
  Hex 0..4294967295  

mscLpV35TestDataStartDelay 1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.6
This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
OBJECT-TYPE    
  Unsigned32 0..1814400  

mscLpV35TestDisplayInterval 1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.7
This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
OBJECT-TYPE    
  Unsigned32 0..30240  

mscLpV35TestDuration 1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.8
This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
OBJECT-TYPE    
  Unsigned32 1..30240  

mscLpV35TestResultsTable 1.3.6.1.4.1.562.36.2.1.12.9.2.12
This group contains all the statistics related attributes of the Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpV35TestResultsEntry

mscLpV35TestResultsEntry 1.3.6.1.4.1.562.36.2.1.12.9.2.12.1
An entry in the mscLpV35TestResultsTable.
OBJECT-TYPE    
  MscLpV35TestResultsEntry  

mscLpV35TestElapsedTime 1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.1
This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
OBJECT-TYPE    
  Counter32  

mscLpV35TestTimeRemaining 1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.2
This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscLpV35TestCauseOfTermination 1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.3
This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4), hardwareReconfigured(5), loopCodeSyncFailed(6), patternSyncFailed(7), patternSyncLost(8)  

mscLpV35TestBitsTx 1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.4
This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpV35TestBytesTx 1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.5
This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpV35TestFrmTx 1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.6
This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpV35TestBitsRx 1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.7
This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpV35TestBytesRx 1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.8
This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpV35TestFrmRx 1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.9
This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpV35TestErroredFrmRx 1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.10
This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpV35TestBitErrorRate 1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.11
This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
OBJECT-TYPE    
  AsciiString SIZE(5)  

mscLpV35ProvTable 1.3.6.1.4.1.562.36.2.1.12.9.10
This group contains all specific provisioning data for a V35 component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpV35ProvEntry

mscLpV35ProvEntry 1.3.6.1.4.1.562.36.2.1.12.9.10.1
An entry in the mscLpV35ProvTable.
OBJECT-TYPE    
  MscLpV35ProvEntry  

mscLpV35LinkMode 1.3.6.1.4.1.562.36.2.1.12.9.10.1.1
This attribute defines the intended gender of the V.35 interface. The actual gender of the interface is determined by the physical connection to the patch panel. If the hardware setup does not match this attribute, an alarm will be generated. In dte mode, the RTS line signal is driven as specified by the attribute readyLineState when the interface passes its initial diagnostics. Then, the RTS line signal will be driven as specified in the attribute dataTransferLineState when the application is ready to transfer data. On the other hand, the input line signals (RFS, DSR, and DCD) are compared against those specified in the attributes readyLineState and dataTransferLineState. The application will be notified when the specified input line states are observed. In dce mode, the V35 component behaves similarly as when it is in dte mode. However, it will be driving the DCE line signals (RFS, DSR, and DCD) and monitoring the DTE line signal (RTS) as specified by the attributes readyLineState and dataTransferLineState.
OBJECT-TYPE    
  INTEGER dte(0), dce(128)  

mscLpV35ReadyLineState 1.3.6.1.4.1.562.36.2.1.12.9.10.1.2
This attribute specifies the line signals originating from the V.35 interface that will always be turned on, provided the interface passes its diagnostics. This set of signals is generally required for maintaining the connection. Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. See also linkMode. Description of bits: rfs(0) dsr(1) dcd(2) rts(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpV35DataTransferLineState 1.3.6.1.4.1.562.36.2.1.12.9.10.1.3
This attribute specifies the line signals required to indicate that the external equipment is in a good state (that is, data transfer can proceed). Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. The value of this attribute must be a superset of that of the readyLineState attribute. See also linkMode. Description of bits: rfs(0) dsr(1) dcd(2) rts(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpV35LineStatusTimeOut 1.3.6.1.4.1.562.36.2.1.12.9.10.1.4
This attribute defines the time that the line state must be stable (good or bad) before a line state change is declared.
OBJECT-TYPE    
  Unsigned32 10..20000  

mscLpV35LineSpeed 1.3.6.1.4.1.562.36.2.1.12.9.10.1.5
This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a clock. The clock rate is rounded up to the nearest available value. Note that the actual clock rates are available in the operational attributes actualTxLineSpeed and actualRxLineSpeed. The actual lineSpeeds configurable on a V.35 DCE interface are: 3840000, 2560000, 2048000, 1920000, 1536000, 1344000, 1280000, 1024000, 960000, 768000, 672000, 640000, 512000, 448000, 384000, 336000, 320000, 256000, 224000, 192000, 168000, 128000, 112000, 64000, 56000, 48000, 32000, 19200, 9600. Note that linspeeds of 1024000 and 2048000 cannot be provisioned on cards that have ports provisioned at 3840000, 2560000, 1920000, 1280000, 960000, 640000 or 320000.
OBJECT-TYPE    
  Unsigned32 9600..3840000  

mscLpV35ClockingSource 1.3.6.1.4.1.562.36.2.1.12.9.10.1.6
This attribute defines the source of synchronization of the outgoing clocks. This attribute is only used when the actualLinkMode is dce. If the value of the attribute is local, the outgoing clocks are synchronized to a local oscillator on the FP. If the value of the attribute is module, the outgoing clocks are synchronized to the oscillator on the active CP.
OBJECT-TYPE    
  INTEGER local(0), module(1)  

mscLpV35DteDataClockSource 1.3.6.1.4.1.562.36.2.1.12.9.10.1.7
This attribute is only used when the actualLinkMode is dce. It is used to determine the clock to be used to recover the receive data. A DTE interface uses TSET(DCE) and RSET(DCE) for timing. If the value of the attribute is fromDce, the DCE uses the internally generated transmit clock to supply both TSET(DCE) and RSET(DCE). If the value of the attribute is fromDte, the DCE still uses the internally generated transmit clock to supply TSET(DCE), but the receive timing is derived from TSET(DTE) on the link. The fromDte mode is recommended when the DTE is far away from the DCE interface. Note that TSET(DTE) is CCITT V.24 circuit 113; TSET(DCE) is CCITT V.24 circuit 114; and RSET(DCE) is CCITT V.24 circuit 115.
OBJECT-TYPE    
  INTEGER fromDce(0), fromDte(2)  

mscLpV35ApplicationFramerName 1.3.6.1.4.1.562.36.2.1.12.9.10.1.8
This attribute contains the component name of a Framer which is associated with the V35 component.
OBJECT-TYPE    
  Link  

mscLpV35EnableDynamicSpeed 1.3.6.1.4.1.562.36.2.1.12.9.10.1.9
When set to yes, this attribute specifies that the transmit link speed should be set to the calculated receiver link speed. This attribute can be set to yes only if the linkMode is dce and the dteDataClockSource is fromDte.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscLpV35CidDataTable 1.3.6.1.4.1.562.36.2.1.12.9.11
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpV35CidDataEntry

mscLpV35CidDataEntry 1.3.6.1.4.1.562.36.2.1.12.9.11.1
An entry in the mscLpV35CidDataTable.
OBJECT-TYPE    
  MscLpV35CidDataEntry  

mscLpV35CustomerIdentifier 1.3.6.1.4.1.562.36.2.1.12.9.11.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

mscLpV35AdminInfoTable 1.3.6.1.4.1.562.36.2.1.12.9.12
This group contains the attributes pertaining to the vendor of the equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpV35AdminInfoEntry

mscLpV35AdminInfoEntry 1.3.6.1.4.1.562.36.2.1.12.9.12.1
An entry in the mscLpV35AdminInfoTable.
OBJECT-TYPE    
  MscLpV35AdminInfoEntry  

mscLpV35Vendor 1.3.6.1.4.1.562.36.2.1.12.9.12.1.1
This is the name of the vendor supplying the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..20)  

mscLpV35CommentText 1.3.6.1.4.1.562.36.2.1.12.9.12.1.2
Any miscellaneous text about the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..60)  

mscLpV35IfEntryTable 1.3.6.1.4.1.562.36.2.1.12.9.13
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpV35IfEntryEntry

mscLpV35IfEntryEntry 1.3.6.1.4.1.562.36.2.1.12.9.13.1
An entry in the mscLpV35IfEntryTable.
OBJECT-TYPE    
  MscLpV35IfEntryEntry  

mscLpV35IfAdminStatus 1.3.6.1.4.1.562.36.2.1.12.9.13.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpV35IfIndex 1.3.6.1.4.1.562.36.2.1.12.9.13.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscLpV35OperStatusTable 1.3.6.1.4.1.562.36.2.1.12.9.14
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpV35OperStatusEntry

mscLpV35OperStatusEntry 1.3.6.1.4.1.562.36.2.1.12.9.14.1
An entry in the mscLpV35OperStatusTable.
OBJECT-TYPE    
  MscLpV35OperStatusEntry  

mscLpV35SnmpOperStatus 1.3.6.1.4.1.562.36.2.1.12.9.14.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpV35StateTable 1.3.6.1.4.1.562.36.2.1.12.9.15
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpV35StateEntry

mscLpV35StateEntry 1.3.6.1.4.1.562.36.2.1.12.9.15.1
An entry in the mscLpV35StateTable.
OBJECT-TYPE    
  MscLpV35StateEntry  

mscLpV35AdminState 1.3.6.1.4.1.562.36.2.1.12.9.15.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscLpV35OperationalState 1.3.6.1.4.1.562.36.2.1.12.9.15.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpV35UsageState 1.3.6.1.4.1.562.36.2.1.12.9.15.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscLpV35AvailabilityStatus 1.3.6.1.4.1.562.36.2.1.12.9.15.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

mscLpV35ProceduralStatus 1.3.6.1.4.1.562.36.2.1.12.9.15.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpV35ControlStatus 1.3.6.1.4.1.562.36.2.1.12.9.15.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpV35AlarmStatus 1.3.6.1.4.1.562.36.2.1.12.9.15.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpV35StandbyStatus 1.3.6.1.4.1.562.36.2.1.12.9.15.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

mscLpV35UnknownStatus 1.3.6.1.4.1.562.36.2.1.12.9.15.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

mscLpV35OperTable 1.3.6.1.4.1.562.36.2.1.12.9.16
This group contains all specific operational data for a V35 component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpV35OperEntry

mscLpV35OperEntry 1.3.6.1.4.1.562.36.2.1.12.9.16.1
An entry in the mscLpV35OperTable.
OBJECT-TYPE    
  MscLpV35OperEntry  

mscLpV35ActualLinkMode 1.3.6.1.4.1.562.36.2.1.12.9.16.1.1
This attribute contains the actual link mode defined by the hardware. Note that the hardware overrides the provisionable data. The interface behaves as a DCE or DTE according to the actualLinkMode.
OBJECT-TYPE    
  INTEGER dte(0), dce(128)  

mscLpV35LineState 1.3.6.1.4.1.562.36.2.1.12.9.16.1.2
This attribute contains the current state of the interface signals. Description of bits: rfs(0) dsr(1) dcd(2) rts(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpV35ActualTxLineSpeed 1.3.6.1.4.1.562.36.2.1.12.9.16.1.3
This attribute is the measured speed of the transmit clock.
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscLpV35ActualRxLineSpeed 1.3.6.1.4.1.562.36.2.1.12.9.16.1.4
This attribute is the measured speed of the receive clock.
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscLpV35DataXferStateChanges 1.3.6.1.4.1.562.36.2.1.12.9.16.1.5
This attribute contains the number of times that the line has entered or exited the data transfer state.
OBJECT-TYPE    
  Counter32  

mscLpX21 1.3.6.1.4.1.562.36.2.1.12.10
OBJECT IDENTIFIER    

mscLpX21RowStatusTable 1.3.6.1.4.1.562.36.2.1.12.10.1
This entry controls the addition and deletion of mscLpX21 components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpX21RowStatusEntry

mscLpX21RowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.10.1.1
A single entry in the table represents a single mscLpX21 component.
OBJECT-TYPE    
  MscLpX21RowStatusEntry  

mscLpX21RowStatus 1.3.6.1.4.1.562.36.2.1.12.10.1.1.1
This variable is used as the basis for SNMP naming of mscLpX21 components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscLpX21ComponentName 1.3.6.1.4.1.562.36.2.1.12.10.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpX21StorageType 1.3.6.1.4.1.562.36.2.1.12.10.1.1.4
This variable represents the storage type value for the mscLpX21 tables.
OBJECT-TYPE    
  StorageType  

mscLpX21Index 1.3.6.1.4.1.562.36.2.1.12.10.1.1.10
This variable represents the index for the mscLpX21 tables.
OBJECT-TYPE    
  Integer32 0..7  

mscLpX21Test 1.3.6.1.4.1.562.36.2.1.12.10.2
OBJECT IDENTIFIER    

mscLpX21TestRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.10.2.1
This entry controls the addition and deletion of mscLpX21Test components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpX21TestRowStatusEntry

mscLpX21TestRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.10.2.1.1
A single entry in the table represents a single mscLpX21Test component.
OBJECT-TYPE    
  MscLpX21TestRowStatusEntry  

mscLpX21TestRowStatus 1.3.6.1.4.1.562.36.2.1.12.10.2.1.1.1
This variable is used as the basis for SNMP naming of mscLpX21Test components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscLpX21TestComponentName 1.3.6.1.4.1.562.36.2.1.12.10.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpX21TestStorageType 1.3.6.1.4.1.562.36.2.1.12.10.2.1.1.4
This variable represents the storage type value for the mscLpX21Test tables.
OBJECT-TYPE    
  StorageType  

mscLpX21TestIndex 1.3.6.1.4.1.562.36.2.1.12.10.2.1.1.10
This variable represents the index for the mscLpX21Test tables.
OBJECT-TYPE    
  NonReplicated  

mscLpX21TestStateTable 1.3.6.1.4.1.562.36.2.1.12.10.2.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpX21TestStateEntry

mscLpX21TestStateEntry 1.3.6.1.4.1.562.36.2.1.12.10.2.10.1
An entry in the mscLpX21TestStateTable.
OBJECT-TYPE    
  MscLpX21TestStateEntry  

mscLpX21TestAdminState 1.3.6.1.4.1.562.36.2.1.12.10.2.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscLpX21TestOperationalState 1.3.6.1.4.1.562.36.2.1.12.10.2.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpX21TestUsageState 1.3.6.1.4.1.562.36.2.1.12.10.2.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscLpX21TestSetupTable 1.3.6.1.4.1.562.36.2.1.12.10.2.11
This group contains all of the operational data for a Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpX21TestSetupEntry

mscLpX21TestSetupEntry 1.3.6.1.4.1.562.36.2.1.12.10.2.11.1
An entry in the mscLpX21TestSetupTable.
OBJECT-TYPE    
  MscLpX21TestSetupEntry  

mscLpX21TestPurpose 1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.1
This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
OBJECT-TYPE    
  AsciiString SIZE(0..40)  

mscLpX21TestType 1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.2
This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
OBJECT-TYPE    
  INTEGER card(0), manual(1), localLoop(2), remoteLoop(3), externalLoop(4), payloadLoop(5), remoteLoopThisTrib(6), v54RemoteLoop(7), pn127RemoteLoop(8)  

mscLpX21TestFrmSize 1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.3
This attribute defines the size of the test data frames in number of bytes.
OBJECT-TYPE    
  Unsigned32 4..4096  

mscLpX21TestFrmPatternType 1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.4
This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
OBJECT-TYPE    
  INTEGER ccitt32kBitPattern(0), ccitt8MBitPattern(1), customizedPattern(2)  

mscLpX21TestCustomizedPattern 1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.5
This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
OBJECT-TYPE    
  Hex 0..4294967295  

mscLpX21TestDataStartDelay 1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.6
This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
OBJECT-TYPE    
  Unsigned32 0..1814400  

mscLpX21TestDisplayInterval 1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.7
This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
OBJECT-TYPE    
  Unsigned32 0..30240  

mscLpX21TestDuration 1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.8
This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
OBJECT-TYPE    
  Unsigned32 1..30240  

mscLpX21TestResultsTable 1.3.6.1.4.1.562.36.2.1.12.10.2.12
This group contains all the statistics related attributes of the Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpX21TestResultsEntry

mscLpX21TestResultsEntry 1.3.6.1.4.1.562.36.2.1.12.10.2.12.1
An entry in the mscLpX21TestResultsTable.
OBJECT-TYPE    
  MscLpX21TestResultsEntry  

mscLpX21TestElapsedTime 1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.1
This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
OBJECT-TYPE    
  Counter32  

mscLpX21TestTimeRemaining 1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.2
This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscLpX21TestCauseOfTermination 1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.3
This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4), hardwareReconfigured(5), loopCodeSyncFailed(6), patternSyncFailed(7), patternSyncLost(8)  

mscLpX21TestBitsTx 1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.4
This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpX21TestBytesTx 1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.5
This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpX21TestFrmTx 1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.6
This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpX21TestBitsRx 1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.7
This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpX21TestBytesRx 1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.8
This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpX21TestFrmRx 1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.9
This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpX21TestErroredFrmRx 1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.10
This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpX21TestBitErrorRate 1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.11
This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
OBJECT-TYPE    
  AsciiString SIZE(5)  

mscLpX21ProvTable 1.3.6.1.4.1.562.36.2.1.12.10.10
This group contains all specific provisioning data for an X21 component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpX21ProvEntry

mscLpX21ProvEntry 1.3.6.1.4.1.562.36.2.1.12.10.10.1
An entry in the mscLpX21ProvTable.
OBJECT-TYPE    
  MscLpX21ProvEntry  

mscLpX21LinkMode 1.3.6.1.4.1.562.36.2.1.12.10.10.1.1
This attribute defines the intended gender of the X21 component (V.11 interface). The actual gender of the interface is determined by the physical connection to the patch panel. If the hardware setup does not match this attribute, an alarm will be generated. In dte mode, the control line signal is driven as specified by the attribute readyLineState when the interface passes its initial diagnostics. Then, the control line signal will be driven as specified in the attribute dataTransferLineState when the application is ready to transfer data. On the other hand, the input line signal (indication) is compared against those specified in the attributes readyLineState and dataTransferLineState. The application will be notified when the specified line states are observed. In dce mode, the X21 component behaves similarly as when it is in dte mode. However, it will be driving the DCE line signal (control) and monitoring the DTE line signal (indication) as specified by the attributes readyLineState and dataTransferLineState.
OBJECT-TYPE    
  INTEGER dte(0), dce(128)  

mscLpX21ReadyLineState 1.3.6.1.4.1.562.36.2.1.12.10.10.1.2
This attribute specifies the line signals originating from the V.11 interface that will always be turned on, provided the interface passes its diagnostics. This set of signals is generally required to maintain the connection. Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. See also linkMode. Description of bits: indication(0) control(1)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpX21DataTransferLineState 1.3.6.1.4.1.562.36.2.1.12.10.10.1.3
The state of the line signals required to indicate that the external equipment is in a good state (that is, data transfer can proceed). Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. The value of this attribute must be a superset of that of the readyLineState attribute. See also linkMode. Description of bits: indication(0) control(1)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpX21LineStatusTimeOut 1.3.6.1.4.1.562.36.2.1.12.10.10.1.4
This attribute defines the time the line state must be stable (good or bad) before a state change is declared.
OBJECT-TYPE    
  Unsigned32 10..20000  

mscLpX21LineSpeed 1.3.6.1.4.1.562.36.2.1.12.10.10.1.5
This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a clock. The clock rate is rounded up to the nearest available value. Note that the actual clock rates are available in the operational attributes actualTxLineSpeed and actualRxLineSpeed. The actual lineSpeeds configurable on a V.11 DCE interface are: 7680000, 3840000, 2560000, 2048000, 1920000, 1536000, 1344000, 1280000, 1024000, 960000, 768000, 672000, 640000, 512000, 448000, 384000, 336000, 320000, 256000, 224000, 192000, 168000, 128000, 112000, 64000, 56000, 48000, 32000, 19200, 9600. Note that linspeeds of 1024000 and 2048000 cannot be provisioned on cards that have ports provisioned at 3840000, 2560000, 1920000, 1280000, 960000, 640000 or 320000.
OBJECT-TYPE    
  Unsigned32 9600..7680000  

mscLpX21ClockingSource 1.3.6.1.4.1.562.36.2.1.12.10.10.1.6
This attribute defines the source of synchronization of the outgoing clocks. This attribute is only used when the actualLinkMode is dce. If the value of the attribute is local, the outgoing clocks are synchronized to a local oscillator on the FP. If the value of the attribute is module, the outgoing clocks are synchronized to the oscillator on the active CP.
OBJECT-TYPE    
  INTEGER local(0), module(1)  

mscLpX21DteDataClockSource 1.3.6.1.4.1.562.36.2.1.12.10.10.1.7
This attribute is only used when the actualLinkMode is dce. It is used to determine the clock to be used to recover the receive data. Note that a V.11 DTE interface uses the S clock (see X.21 standard) for both receive data and transmit data timing. The DTE interface always loops the received S clock back to the DCE as the X clock (see X.21 standard). If the value of the attribute is fromDce, the DCE V.11 interface uses the internally generated transmit clock as the S clock and for both receive and transmit data timing. The X clock is ignored. If the value of the attribute is fromDte, the DCE still uses the internally generated transmit clock as the S clock and for transmit data timing, but the receive data timing is derived from the X clock. The fromDte mode is recommended when the DTE is far away from the DCE interface.
OBJECT-TYPE    
  INTEGER fromDce(0), fromDte(2)  

mscLpX21LineTerminationRequired 1.3.6.1.4.1.562.36.2.1.12.10.10.1.8
This attribute specifies whether termination is required for this interface. If the hardware setup does not match this attribute, an alarm will be generated.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscLpX21ApplicationFramerName 1.3.6.1.4.1.562.36.2.1.12.10.10.1.9
This attribute contains the component name of a Framer which is associated with the X21 component.
OBJECT-TYPE    
  Link  

mscLpX21EnableDynamicSpeed 1.3.6.1.4.1.562.36.2.1.12.10.10.1.10
When set to yes, this attribute specifies that the transmit link speed should be set to the calculated receiver link speed. This attribute can be set to yes only if the linkMode is dce and the dteDataClockSource is fromDte..
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

mscLpX21CidDataTable 1.3.6.1.4.1.562.36.2.1.12.10.11
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpX21CidDataEntry

mscLpX21CidDataEntry 1.3.6.1.4.1.562.36.2.1.12.10.11.1
An entry in the mscLpX21CidDataTable.
OBJECT-TYPE    
  MscLpX21CidDataEntry  

mscLpX21CustomerIdentifier 1.3.6.1.4.1.562.36.2.1.12.10.11.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

mscLpX21AdminInfoTable 1.3.6.1.4.1.562.36.2.1.12.10.12
This group contains the attributes pertaining to the vendor of the equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpX21AdminInfoEntry

mscLpX21AdminInfoEntry 1.3.6.1.4.1.562.36.2.1.12.10.12.1
An entry in the mscLpX21AdminInfoTable.
OBJECT-TYPE    
  MscLpX21AdminInfoEntry  

mscLpX21Vendor 1.3.6.1.4.1.562.36.2.1.12.10.12.1.1
This is the name of the vendor supplying the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..20)  

mscLpX21CommentText 1.3.6.1.4.1.562.36.2.1.12.10.12.1.2
Any miscellaneous text about the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..60)  

mscLpX21IfEntryTable 1.3.6.1.4.1.562.36.2.1.12.10.13
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpX21IfEntryEntry

mscLpX21IfEntryEntry 1.3.6.1.4.1.562.36.2.1.12.10.13.1
An entry in the mscLpX21IfEntryTable.
OBJECT-TYPE    
  MscLpX21IfEntryEntry  

mscLpX21IfAdminStatus 1.3.6.1.4.1.562.36.2.1.12.10.13.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpX21IfIndex 1.3.6.1.4.1.562.36.2.1.12.10.13.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscLpX21OperStatusTable 1.3.6.1.4.1.562.36.2.1.12.10.14
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpX21OperStatusEntry

mscLpX21OperStatusEntry 1.3.6.1.4.1.562.36.2.1.12.10.14.1
An entry in the mscLpX21OperStatusTable.
OBJECT-TYPE    
  MscLpX21OperStatusEntry  

mscLpX21SnmpOperStatus 1.3.6.1.4.1.562.36.2.1.12.10.14.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpX21StateTable 1.3.6.1.4.1.562.36.2.1.12.10.15
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpX21StateEntry

mscLpX21StateEntry 1.3.6.1.4.1.562.36.2.1.12.10.15.1
An entry in the mscLpX21StateTable.
OBJECT-TYPE    
  MscLpX21StateEntry  

mscLpX21AdminState 1.3.6.1.4.1.562.36.2.1.12.10.15.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscLpX21OperationalState 1.3.6.1.4.1.562.36.2.1.12.10.15.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpX21UsageState 1.3.6.1.4.1.562.36.2.1.12.10.15.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscLpX21AvailabilityStatus 1.3.6.1.4.1.562.36.2.1.12.10.15.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

mscLpX21ProceduralStatus 1.3.6.1.4.1.562.36.2.1.12.10.15.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpX21ControlStatus 1.3.6.1.4.1.562.36.2.1.12.10.15.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpX21AlarmStatus 1.3.6.1.4.1.562.36.2.1.12.10.15.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpX21StandbyStatus 1.3.6.1.4.1.562.36.2.1.12.10.15.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

mscLpX21UnknownStatus 1.3.6.1.4.1.562.36.2.1.12.10.15.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

mscLpX21OperTable 1.3.6.1.4.1.562.36.2.1.12.10.16
This group contains all specific operational data for an X21 component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpX21OperEntry

mscLpX21OperEntry 1.3.6.1.4.1.562.36.2.1.12.10.16.1
An entry in the mscLpX21OperTable.
OBJECT-TYPE    
  MscLpX21OperEntry  

mscLpX21ActualLinkMode 1.3.6.1.4.1.562.36.2.1.12.10.16.1.1
This attribute contains the actual link mode defined by the hardware. Note that the hardware overrides the provisionable data. The interface behaves as a DCE or DTE according to the actualLinkMode.
OBJECT-TYPE    
  INTEGER dte(0), dce(128)  

mscLpX21LineState 1.3.6.1.4.1.562.36.2.1.12.10.16.1.2
This attribute contains the current state of the interface signals. Description of bits: indication(0) control(1)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpX21ActualTxLineSpeed 1.3.6.1.4.1.562.36.2.1.12.10.16.1.3
This attribute is the measured speed of the transmit clock.
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscLpX21ActualRxLineSpeed 1.3.6.1.4.1.562.36.2.1.12.10.16.1.4
This attribute is the measured speed of the receive clock.
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscLpX21DataXferStateChanges 1.3.6.1.4.1.562.36.2.1.12.10.16.1.5
This attribute contains the number of times that the line has entered or exited the data transfer state.
OBJECT-TYPE    
  Counter32  

mscLpSonet 1.3.6.1.4.1.562.36.2.1.12.14
OBJECT IDENTIFIER    

mscLpSonetRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.14.1
This entry controls the addition and deletion of mscLpSonet components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSonetRowStatusEntry

mscLpSonetRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.14.1.1
A single entry in the table represents a single mscLpSonet component.
OBJECT-TYPE    
  MscLpSonetRowStatusEntry  

mscLpSonetRowStatus 1.3.6.1.4.1.562.36.2.1.12.14.1.1.1
This variable is used as the basis for SNMP naming of mscLpSonet components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscLpSonetComponentName 1.3.6.1.4.1.562.36.2.1.12.14.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpSonetStorageType 1.3.6.1.4.1.562.36.2.1.12.14.1.1.4
This variable represents the storage type value for the mscLpSonet tables.
OBJECT-TYPE    
  StorageType  

mscLpSonetIndex 1.3.6.1.4.1.562.36.2.1.12.14.1.1.10
This variable represents the index for the mscLpSonet tables.
OBJECT-TYPE    
  Integer32 0..3  

mscLpSonetPath 1.3.6.1.4.1.562.36.2.1.12.14.2
OBJECT IDENTIFIER    

mscLpSonetPathRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.14.2.1
This entry controls the addition and deletion of mscLpSonetPath components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSonetPathRowStatusEntry

mscLpSonetPathRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.14.2.1.1
A single entry in the table represents a single mscLpSonetPath component.
OBJECT-TYPE    
  MscLpSonetPathRowStatusEntry  

mscLpSonetPathRowStatus 1.3.6.1.4.1.562.36.2.1.12.14.2.1.1.1
This variable is used as the basis for SNMP naming of mscLpSonetPath components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscLpSonetPathComponentName 1.3.6.1.4.1.562.36.2.1.12.14.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpSonetPathStorageType 1.3.6.1.4.1.562.36.2.1.12.14.2.1.1.4
This variable represents the storage type value for the mscLpSonetPath tables.
OBJECT-TYPE    
  StorageType  

mscLpSonetPathIndex 1.3.6.1.4.1.562.36.2.1.12.14.2.1.1.10
This variable represents the index for the mscLpSonetPath tables.
OBJECT-TYPE    
  Integer32 0..0  

mscLpSonetPathCell 1.3.6.1.4.1.562.36.2.1.12.14.2.2
OBJECT IDENTIFIER    

mscLpSonetPathCellRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.14.2.2.1
This entry controls the addition and deletion of mscLpSonetPathCell components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSonetPathCellRowStatusEntry

mscLpSonetPathCellRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.14.2.2.1.1
A single entry in the table represents a single mscLpSonetPathCell component.
OBJECT-TYPE    
  MscLpSonetPathCellRowStatusEntry  

mscLpSonetPathCellRowStatus 1.3.6.1.4.1.562.36.2.1.12.14.2.2.1.1.1
This variable is used as the basis for SNMP naming of mscLpSonetPathCell components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscLpSonetPathCellComponentName 1.3.6.1.4.1.562.36.2.1.12.14.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpSonetPathCellStorageType 1.3.6.1.4.1.562.36.2.1.12.14.2.2.1.1.4
This variable represents the storage type value for the mscLpSonetPathCell tables.
OBJECT-TYPE    
  StorageType  

mscLpSonetPathCellIndex 1.3.6.1.4.1.562.36.2.1.12.14.2.2.1.1.10
This variable represents the index for the mscLpSonetPathCell tables.
OBJECT-TYPE    
  NonReplicated  

mscLpSonetPathCellProvTable 1.3.6.1.4.1.562.36.2.1.12.14.2.2.10
This group contains the provisioning attributes for the AtmCell component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSonetPathCellProvEntry

mscLpSonetPathCellProvEntry 1.3.6.1.4.1.562.36.2.1.12.14.2.2.10.1
An entry in the mscLpSonetPathCellProvTable.
OBJECT-TYPE    
  MscLpSonetPathCellProvEntry  

mscLpSonetPathCellAlarmActDelay 1.3.6.1.4.1.562.36.2.1.12.14.2.2.10.1.1
This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
OBJECT-TYPE    
  Unsigned32 0..2000  

mscLpSonetPathCellScrambleCellPayload 1.3.6.1.4.1.562.36.2.1.12.14.2.2.10.1.2
Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscLpSonetPathCellCorrectSingleBitHeaderErrors 1.3.6.1.4.1.562.36.2.1.12.14.2.2.10.1.3
This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscLpSonetPathCellOperTable 1.3.6.1.4.1.562.36.2.1.12.14.2.2.11
This group contains the common operational attributes for the AtmCell component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSonetPathCellOperEntry

mscLpSonetPathCellOperEntry 1.3.6.1.4.1.562.36.2.1.12.14.2.2.11.1
An entry in the mscLpSonetPathCellOperTable.
OBJECT-TYPE    
  MscLpSonetPathCellOperEntry  

mscLpSonetPathCellLcdAlarm 1.3.6.1.4.1.562.36.2.1.12.14.2.2.11.1.1
This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpSonetPathCellStatsTable 1.3.6.1.4.1.562.36.2.1.12.14.2.2.12
This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSonetPathCellStatsEntry

mscLpSonetPathCellStatsEntry 1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1
An entry in the mscLpSonetPathCellStatsTable.
OBJECT-TYPE    
  MscLpSonetPathCellStatsEntry  

mscLpSonetPathCellUncorrectableHecErrors 1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1.1
This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
OBJECT-TYPE    
  Counter32  

mscLpSonetPathCellSevErroredSec 1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1.2
This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
OBJECT-TYPE    
  Counter32  

mscLpSonetPathCellReceiveCellUtilization 1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1.3
This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  Gauge32 0..100  

mscLpSonetPathCellTransmitCellUtilization 1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1.4
This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  Gauge32 0..100  

mscLpSonetPathCellCorrectableHeaderErrors 1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1.5
This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
OBJECT-TYPE    
  Counter32  

mscLpSonetPathProvTable 1.3.6.1.4.1.562.36.2.1.12.14.2.10
This group contains all of the provisioning data for a Sonet/Sdh Path component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSonetPathProvEntry

mscLpSonetPathProvEntry 1.3.6.1.4.1.562.36.2.1.12.14.2.10.1
An entry in the mscLpSonetPathProvTable.
OBJECT-TYPE    
  MscLpSonetPathProvEntry  

mscLpSonetPathApplicationFramerName 1.3.6.1.4.1.562.36.2.1.12.14.2.10.1.1
This attribute defines the link to the software stack. It defines which application is running on top of the Path component.
OBJECT-TYPE    
  Link  

mscLpSonetPathCidDataTable 1.3.6.1.4.1.562.36.2.1.12.14.2.11
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSonetPathCidDataEntry

mscLpSonetPathCidDataEntry 1.3.6.1.4.1.562.36.2.1.12.14.2.11.1
An entry in the mscLpSonetPathCidDataTable.
OBJECT-TYPE    
  MscLpSonetPathCidDataEntry  

mscLpSonetPathCustomerIdentifier 1.3.6.1.4.1.562.36.2.1.12.14.2.11.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

mscLpSonetPathStateTable 1.3.6.1.4.1.562.36.2.1.12.14.2.12
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSonetPathStateEntry

mscLpSonetPathStateEntry 1.3.6.1.4.1.562.36.2.1.12.14.2.12.1
An entry in the mscLpSonetPathStateTable.
OBJECT-TYPE    
  MscLpSonetPathStateEntry  

mscLpSonetPathAdminState 1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscLpSonetPathOperationalState 1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpSonetPathUsageState 1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscLpSonetPathAvailabilityStatus 1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

mscLpSonetPathProceduralStatus 1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpSonetPathControlStatus 1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpSonetPathAlarmStatus 1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpSonetPathStandbyStatus 1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

mscLpSonetPathUnknownStatus 1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

mscLpSonetPathIfEntryTable 1.3.6.1.4.1.562.36.2.1.12.14.2.13
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSonetPathIfEntryEntry

mscLpSonetPathIfEntryEntry 1.3.6.1.4.1.562.36.2.1.12.14.2.13.1
An entry in the mscLpSonetPathIfEntryTable.
OBJECT-TYPE    
  MscLpSonetPathIfEntryEntry  

mscLpSonetPathIfAdminStatus 1.3.6.1.4.1.562.36.2.1.12.14.2.13.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpSonetPathIfIndex 1.3.6.1.4.1.562.36.2.1.12.14.2.13.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscLpSonetPathOperStatusTable 1.3.6.1.4.1.562.36.2.1.12.14.2.14
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSonetPathOperStatusEntry

mscLpSonetPathOperStatusEntry 1.3.6.1.4.1.562.36.2.1.12.14.2.14.1
An entry in the mscLpSonetPathOperStatusTable.
OBJECT-TYPE    
  MscLpSonetPathOperStatusEntry  

mscLpSonetPathSnmpOperStatus 1.3.6.1.4.1.562.36.2.1.12.14.2.14.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpSonetPathOperTable 1.3.6.1.4.1.562.36.2.1.12.14.2.15
This group contains the common operational data for Path component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSonetPathOperEntry

mscLpSonetPathOperEntry 1.3.6.1.4.1.562.36.2.1.12.14.2.15.1
An entry in the mscLpSonetPathOperTable.
OBJECT-TYPE    
  MscLpSonetPathOperEntry  

mscLpSonetPathLopAlarm 1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.1
This attribute displays whether a Loss Of Pointer (LOP) alarm state has been entered. An LOP alarm state is entered when LOP defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOP defect occurs when no valid SPE or VC pointer was received in 8 contiguous frames. If the LOP defects are intermittently occurring, the LOP defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the LOP alarm condition is cleared. The condition is cleared when no more invalid pointer has been reported for 10 seconds +/- 0.5 seconds. The lopAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpSonetPathRxAisAlarm 1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.2
This attribute displays whether an Path Alarm Indication Signal (P- AIS) alarm state has been entered. An P-AIS alarm state is entered when P-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-AIS defect is the occurrence of the P-AIS signal in three contiguous valid STS or STM frames (all one's in bytes H1 and H2). If the P-AIS defects are intermittently occurring, the P-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-AIS alarm condition is cleared. The condition is cleared after no P-AIS defect has been detected for 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpSonetPathRxRfiAlarm 1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.3
This attribute displays whether the Path Remote Failure Indication (P-RFI) alarm state has been entered. An P-RFI alarm state is entered when Path Remote Defect Indicator (P-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-RDI defect is the occurrence of the P-RDI signal in five contiguous valid STS or STM frames (bit 5 of the G1 byte set to 1). If the P-RDI defects are intermittently occurring, the P-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10)with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-RFI alarm condition is cleared. The condition is cleared after no P-RDI defect has been detected for 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpSonetPathSignalLabelMismatch 1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.4
This attribute displays whether the Path Signal Label Mismatch (P- SLM) failure condition has been entered. An P-SLM failure condition is entered when P-SLM defects have been observed and accumulated for period of 2.5 seconds +/- 0.5 seconds. An P-SLM defect occurs when detecting an unexpected path signal label. The expected Path signal labels are 'Mapping for ATM' or 'Equipped - Non Specific Payload'. If the P-SLM defects are intermittently occurring, the P-SLM defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the Path Signal Label Mismatch failure condition is cleared. The condition is cleared when an expected path signal label is received for 10 seconds +/- 0.5 seconds. The signalLabelMismatch attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpSonetPathTxAis 1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.5
This attribute displays whether the Path Alarm Indication Signal (P- AIS) signal is being transmitted on the path. The P-AIS signal is transmitted when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpSonetPathTxRdi 1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.6
This attribute displays whether the Path Remote Defect Indicator (P-RDI) signal is being transmitted over the path signal. The P-RDI signal is transmitted over the outgoing line upon detection of LOP, P-AIS or the occurrence of the LCD state. This attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpSonetPathStatsTable 1.3.6.1.4.1.562.36.2.1.12.14.2.16
This group contains the statistics data for a Sonet/Sdh Path component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSonetPathStatsEntry

mscLpSonetPathStatsEntry 1.3.6.1.4.1.562.36.2.1.12.14.2.16.1
An entry in the mscLpSonetPathStatsTable.
OBJECT-TYPE    
  MscLpSonetPathStatsEntry  

mscLpSonetPathPathErrorFreeSec 1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.1
This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an near-end error free state.
OBJECT-TYPE    
  Counter32  

mscLpSonetPathPathCodeViolations 1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.2
This attribute indicates the total number of Path Code Violations (PCVs) detected. Each PCV corresponds to a path BIP-8 error. PCV counting is inhibited over second intervals where a Path Severely Errored Second (PSES) is counted. Counting of PCVs is also inhibited over second intervals where a Path Unavailable Second (PUAS) is counted. The count wraps at its maximum value.
OBJECT-TYPE    
  Counter32  

mscLpSonetPathPathErroredSec 1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.3
This attribute indicates the total number of Path Errored Seconds (PESs) that have been counted. A PES is declared for second intervals containing one or more PCVs or one or more LOP or path AIS defects. Counting of PES is inhibited when PUAS is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

mscLpSonetPathPathSevErroredSec 1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.4
This attribute indicates the total number of Path Severely Errored Seconds (PSESs) that have been counted. A PSES is declared for second intervals containing more than x PCVs or one or more LOP or path AIS defects. The value of x is 2400 for a 155 Mbits/sec interface. Counting of PSES is inhibited when PUAS is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

mscLpSonetPathPathAisLopSec 1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.5
This attribute indicates the total number of path AIS and LOP Seconds (PALSs). A PALS is declared for second intervals containing one or more path AIS or LOP defects. Counting of PALS is inhibited when PUAS is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

mscLpSonetPathPathUnavailSec 1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.6
This attribute indicates the total number of one second intervals for which the STS/STM path is unavailable. The path becomes unavailable at the onset of 10 consecutive PSESs. The 10 PSESs are included in the unavailable time. Once unavailable, the path becomes available at the onset of 10 contiguous seconds with no PSES. The 10 seconds with no PSES are excluded from the unavailable time. For second intervals where a Path Unavailable Second (PUAS) is counted, counting of PCV, PES, PSES and PALS is inhibited.
OBJECT-TYPE    
  Counter32  

mscLpSonetPathPathFailures 1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.7
This attribute indicates the total number of times that a path failure (LOP, P-AIS or Path Signal Label Mismatch failure) has been declared.
OBJECT-TYPE    
  Counter32  

mscLpSonetPathFarEndPathErrorFreeSec 1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.8
This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an far-end error free state.
OBJECT-TYPE    
  Counter32  

mscLpSonetPathFarEndPathCodeViolations 1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.9
This attribute indicates the total number of Far-End Path Code Violations (FEPCVs) detected. Each FEPCV corresponds to a path FEBE. FEPCV counting is inhibited over second intervals where a Far-End Path Severely Errored Second (FEPSES) is counted. Counting of PCVs is also inhibited over second intervals where a Far-End Path Unavailable Second (FEPUAS) is counted. The count wraps at its maximum value.
OBJECT-TYPE    
  Counter32  

mscLpSonetPathFarEndPathErroredSec 1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.10
This attribute indicates the total number of Far-End Path Errored Seconds (FEPESs) that have been counted. A FEPES is declared for second intervals containing one or more FEPCVs or one or more path RDI (P-RDI) defects. Counting of FEPES is inhibited when FEPUAS is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

mscLpSonetPathFarEndPathSevErroredSec 1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.11
This attribute indicates the total number of Far-End Path Severely Errored Seconds (FEPSESs) that have been counted. A FEPSES is declared for second intervals containing more than x FEPCVs or one or more P-RDI defects. The value of x is 2400 for a 155 Mbits/ sec interface. Counting of FEPSESs is inhibited when FEPUAS is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

mscLpSonetPathFarEndPathAisLopSec 1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.12
This attribute indicates the total number of Far-End Path AIS and LOP Seconds (FEPALSs). A FEPALS is declared for second intervals containing one or more P-RDI defects. Counting of FEPALS is inhibited when FEPUAS is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

mscLpSonetPathFarEndPathUnavailSec 1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.13
This attribute indicates the total number of one second intervals for which the STS/STM far-end path is unavailable. The far-end path becomes unavailable at the onset of 10 consecutive FEPSESs. The 10 FEPSESs are included in the unavailable time. Once unavailable, the far-end path becomes available at the onset of 10 contiguous seconds with no FEPSES. The 10 seconds with no FEPSES are excluded from the unavailable time. For second intervals where a Far-End Path Unavailable Second (FEPUAS) is counted, counting of FEPCV, FEPES, FEPSES and FEPALS is inhibited.
OBJECT-TYPE    
  Counter32  

mscLpSonetPathFarEndPathFailures 1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.14
This attribute indicates the total number of times that a STS/STM far-end path failure (P-RFI failure) has been declared.
OBJECT-TYPE    
  Counter32  

mscLpSonetTest 1.3.6.1.4.1.562.36.2.1.12.14.3
OBJECT IDENTIFIER    

mscLpSonetTestRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.14.3.1
This entry controls the addition and deletion of mscLpSonetTest components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSonetTestRowStatusEntry

mscLpSonetTestRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.14.3.1.1
A single entry in the table represents a single mscLpSonetTest component.
OBJECT-TYPE    
  MscLpSonetTestRowStatusEntry  

mscLpSonetTestRowStatus 1.3.6.1.4.1.562.36.2.1.12.14.3.1.1.1
This variable is used as the basis for SNMP naming of mscLpSonetTest components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscLpSonetTestComponentName 1.3.6.1.4.1.562.36.2.1.12.14.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpSonetTestStorageType 1.3.6.1.4.1.562.36.2.1.12.14.3.1.1.4
This variable represents the storage type value for the mscLpSonetTest tables.
OBJECT-TYPE    
  StorageType  

mscLpSonetTestIndex 1.3.6.1.4.1.562.36.2.1.12.14.3.1.1.10
This variable represents the index for the mscLpSonetTest tables.
OBJECT-TYPE    
  NonReplicated  

mscLpSonetTestStateTable 1.3.6.1.4.1.562.36.2.1.12.14.3.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSonetTestStateEntry

mscLpSonetTestStateEntry 1.3.6.1.4.1.562.36.2.1.12.14.3.10.1
An entry in the mscLpSonetTestStateTable.
OBJECT-TYPE    
  MscLpSonetTestStateEntry  

mscLpSonetTestAdminState 1.3.6.1.4.1.562.36.2.1.12.14.3.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscLpSonetTestOperationalState 1.3.6.1.4.1.562.36.2.1.12.14.3.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpSonetTestUsageState 1.3.6.1.4.1.562.36.2.1.12.14.3.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscLpSonetTestSetupTable 1.3.6.1.4.1.562.36.2.1.12.14.3.11
This group contains all of the operational data for a Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSonetTestSetupEntry

mscLpSonetTestSetupEntry 1.3.6.1.4.1.562.36.2.1.12.14.3.11.1
An entry in the mscLpSonetTestSetupTable.
OBJECT-TYPE    
  MscLpSonetTestSetupEntry  

mscLpSonetTestPurpose 1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.1
This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
OBJECT-TYPE    
  AsciiString SIZE(0..40)  

mscLpSonetTestType 1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.2
This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
OBJECT-TYPE    
  INTEGER card(0), manual(1), localLoop(2), remoteLoop(3), externalLoop(4), payloadLoop(5), remoteLoopThisTrib(6), v54RemoteLoop(7), pn127RemoteLoop(8)  

mscLpSonetTestFrmSize 1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.3
This attribute defines the size of the test data frames in number of bytes.
OBJECT-TYPE    
  Unsigned32 4..4096  

mscLpSonetTestFrmPatternType 1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.4
This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
OBJECT-TYPE    
  INTEGER ccitt32kBitPattern(0), ccitt8MBitPattern(1), customizedPattern(2)  

mscLpSonetTestCustomizedPattern 1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.5
This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
OBJECT-TYPE    
  Hex 0..4294967295  

mscLpSonetTestDataStartDelay 1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.6
This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
OBJECT-TYPE    
  Unsigned32 0..1814400  

mscLpSonetTestDisplayInterval 1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.7
This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
OBJECT-TYPE    
  Unsigned32 0..30240  

mscLpSonetTestDuration 1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.8
This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
OBJECT-TYPE    
  Unsigned32 1..30240  

mscLpSonetTestResultsTable 1.3.6.1.4.1.562.36.2.1.12.14.3.12
This group contains all the statistics related attributes of the Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSonetTestResultsEntry

mscLpSonetTestResultsEntry 1.3.6.1.4.1.562.36.2.1.12.14.3.12.1
An entry in the mscLpSonetTestResultsTable.
OBJECT-TYPE    
  MscLpSonetTestResultsEntry  

mscLpSonetTestElapsedTime 1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.1
This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
OBJECT-TYPE    
  Counter32  

mscLpSonetTestTimeRemaining 1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.2
This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscLpSonetTestCauseOfTermination 1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.3
This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4), hardwareReconfigured(5), loopCodeSyncFailed(6), patternSyncFailed(7), patternSyncLost(8)  

mscLpSonetTestBitsTx 1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.4
This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpSonetTestBytesTx 1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.5
This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpSonetTestFrmTx 1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.6
This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpSonetTestBitsRx 1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.7
This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpSonetTestBytesRx 1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.8
This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpSonetTestFrmRx 1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.9
This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpSonetTestErroredFrmRx 1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.10
This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpSonetTestBitErrorRate 1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.11
This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
OBJECT-TYPE    
  AsciiString SIZE(5)  

mscLpSonetProvTable 1.3.6.1.4.1.562.36.2.1.12.14.10
This group contains all of the provisioning data for a Sonet or Sdh component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSonetProvEntry

mscLpSonetProvEntry 1.3.6.1.4.1.562.36.2.1.12.14.10.1
An entry in the mscLpSonetProvTable.
OBJECT-TYPE    
  MscLpSonetProvEntry  

mscLpSonetClockingSource 1.3.6.1.4.1.562.36.2.1.12.14.10.1.1
This attribute defines the type of clocking source used for synchronizing the OC-3 transmit clock: local means direct use of the local clock oscillator at its centre frequency; line means the use of a signal phase-locked to the incoming OC-3 line rate; module means the use of a signal phase-locked to the CP reference clock. When adding a Sonet/Sdh component, the clockingSource attribute is set to module if the NetworkSynchronization component has been added and is set to local otherwise. Note that the multiport OC-3 cell-based cards has one common clock source for each of the three ports when either the clocking source local or module is selected. For this reason, it is not allowed to have at the same time the clockingSource attribute set to local on one port and module on another port. Furthermore, the clockingSource attribute cannot be set to module if the NetworkSynchronization component has not been added.
OBJECT-TYPE    
  INTEGER local(0), line(1), module(2)  

mscLpSonetCidDataTable 1.3.6.1.4.1.562.36.2.1.12.14.11
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSonetCidDataEntry

mscLpSonetCidDataEntry 1.3.6.1.4.1.562.36.2.1.12.14.11.1
An entry in the mscLpSonetCidDataTable.
OBJECT-TYPE    
  MscLpSonetCidDataEntry  

mscLpSonetCustomerIdentifier 1.3.6.1.4.1.562.36.2.1.12.14.11.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

mscLpSonetAdminInfoTable 1.3.6.1.4.1.562.36.2.1.12.14.12
This group contains the attributes pertaining to the vendor of the equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSonetAdminInfoEntry

mscLpSonetAdminInfoEntry 1.3.6.1.4.1.562.36.2.1.12.14.12.1
An entry in the mscLpSonetAdminInfoTable.
OBJECT-TYPE    
  MscLpSonetAdminInfoEntry  

mscLpSonetVendor 1.3.6.1.4.1.562.36.2.1.12.14.12.1.1
This is the name of the vendor supplying the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..20)  

mscLpSonetCommentText 1.3.6.1.4.1.562.36.2.1.12.14.12.1.2
Any miscellaneous text about the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..60)  

mscLpSonetIfEntryTable 1.3.6.1.4.1.562.36.2.1.12.14.13
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSonetIfEntryEntry

mscLpSonetIfEntryEntry 1.3.6.1.4.1.562.36.2.1.12.14.13.1
An entry in the mscLpSonetIfEntryTable.
OBJECT-TYPE    
  MscLpSonetIfEntryEntry  

mscLpSonetIfAdminStatus 1.3.6.1.4.1.562.36.2.1.12.14.13.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpSonetIfIndex 1.3.6.1.4.1.562.36.2.1.12.14.13.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscLpSonetOperStatusTable 1.3.6.1.4.1.562.36.2.1.12.14.14
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSonetOperStatusEntry

mscLpSonetOperStatusEntry 1.3.6.1.4.1.562.36.2.1.12.14.14.1
An entry in the mscLpSonetOperStatusTable.
OBJECT-TYPE    
  MscLpSonetOperStatusEntry  

mscLpSonetSnmpOperStatus 1.3.6.1.4.1.562.36.2.1.12.14.14.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpSonetStateTable 1.3.6.1.4.1.562.36.2.1.12.14.15
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSonetStateEntry

mscLpSonetStateEntry 1.3.6.1.4.1.562.36.2.1.12.14.15.1
An entry in the mscLpSonetStateTable.
OBJECT-TYPE    
  MscLpSonetStateEntry  

mscLpSonetAdminState 1.3.6.1.4.1.562.36.2.1.12.14.15.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscLpSonetOperationalState 1.3.6.1.4.1.562.36.2.1.12.14.15.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpSonetUsageState 1.3.6.1.4.1.562.36.2.1.12.14.15.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscLpSonetAvailabilityStatus 1.3.6.1.4.1.562.36.2.1.12.14.15.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

mscLpSonetProceduralStatus 1.3.6.1.4.1.562.36.2.1.12.14.15.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpSonetControlStatus 1.3.6.1.4.1.562.36.2.1.12.14.15.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpSonetAlarmStatus 1.3.6.1.4.1.562.36.2.1.12.14.15.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpSonetStandbyStatus 1.3.6.1.4.1.562.36.2.1.12.14.15.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

mscLpSonetUnknownStatus 1.3.6.1.4.1.562.36.2.1.12.14.15.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

mscLpSonetOperTable 1.3.6.1.4.1.562.36.2.1.12.14.16
This group contains the common operational data for Sonet or Sdh component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSonetOperEntry

mscLpSonetOperEntry 1.3.6.1.4.1.562.36.2.1.12.14.16.1
An entry in the mscLpSonetOperTable.
OBJECT-TYPE    
  MscLpSonetOperEntry  

mscLpSonetLosAlarm 1.3.6.1.4.1.562.36.2.1.12.14.16.1.1
This attribute indicates whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds, or if an LOS defect is present when the criteria for LOF failure declaration have been met. A LOS defect is declared when 20+/-3 us of all-zeros pattern is detected. The LOS defect is cleared when two valid framing words are detected and no Loss Of Signal condition is detected during an interval of 20+/-3 us. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the LOS alarm condition is cleared. The LOS alarm state is cleared after LOS defects have been absent for a period of 10 seconds +/- 0.5 seconds. The losAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpSonetLofAlarm 1.3.6.1.4.1.562.36.2.1.12.14.16.1.2
This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when LOF defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds, except when an LOS defect or failure is present. An LOF defect is detected when getting contiguous errored frame alignment for at least 3 msec. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the LOF alarm condition is cleared. The condition is cleared when framing has been achieved for a period of 10 seconds +/- 0.5 seconds. The lofAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpSonetRxAisAlarm 1.3.6.1.4.1.562.36.2.1.12.14.16.1.3
This attribute displays whether a Line Alarm Indication Signal (L- AIS) alarm state has been entered. An L-AIS alarm state is entered when L-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-AIS defect is the occurrence of the L-AIS signal in five contiguous STS (STM) frames (111 pattern in bits 6,7, and 8 of the K2 bytes). If the L-AIS defects are intermittently occurring, the L-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-AIS alarm condition is cleared. The condition is cleared after not detecting the L-AIS signal for a period of 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpSonetRxRfiAlarm 1.3.6.1.4.1.562.36.2.1.12.14.16.1.4
This attribute displays whether a Line Remote Failure Indication (LRFI) alarm state has been entered. An L-RFI alarm state is entered when Line Remote Failure Indication (L-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-RDI defect is the occurrence of the L-RDI signal in five contiguous valid STS (STM) frame (110 pattern in bits 6,7, and 8 of the K2 bytes). If the L-RDI defects are intermittently occurring, the L-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-RFI alarm condition is cleared. The condition is cleared after not detecting the L-RDI signal for a period of 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpSonetTxAis 1.3.6.1.4.1.562.36.2.1.12.14.16.1.5
This attribute displays whether the Line Alarm Indication Signal (L- AIS) signal is being transmitted on the outgoing line. This signal is transmitted when the Sonet/Sdh is locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpSonetTxRdi 1.3.6.1.4.1.562.36.2.1.12.14.16.1.6
This attribute displays whether the Line Remote Defect Indicator (L-RDI) signal is being transmitted over the OC-3 line. The L-RDI signal is transmitted upon the detection of the LOS, LOF or L-AIS defect. This attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpSonetUnusableTxClockRefAlarm 1.3.6.1.4.1.562.36.2.1.12.14.16.1.7
This attribute displays whether an Unusable Transmit Clock Reference (UTCR) alarm state has been entered. A UTCR alarm state is entered when a Sonet/Sdh port provisioned to act as a transmit clock reference has received the code 'do not use for synchronization' in the S1 byte (in the SONET/ SDH line overhead) for 2.5 +/- 0.5 seconds. The condition is cleared after not detecting the 'do not use for synchronization' code for a period of 10 +/- 0.5 seconds or when the port is no longer provisioned to act as a transmit clock reference. A port is acting as a transmit clock reference if it is provisioned with a) a clockingSource of line, or b) it has been provisioned as a primaryReference, secondaryReference or tertiaryReference in the NetworkSynchronization component. The unusableTxClockRefAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpSonetStatsTable 1.3.6.1.4.1.562.36.2.1.12.14.17
This group contains the statistics data for a Sonet or Sdh component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSonetStatsEntry

mscLpSonetStatsEntry 1.3.6.1.4.1.562.36.2.1.12.14.17.1
An entry in the mscLpSonetStatsTable.
OBJECT-TYPE    
  MscLpSonetStatsEntry  

mscLpSonetRunningTime 1.3.6.1.4.1.562.36.2.1.12.14.17.1.1
This attribute indicates the total number of seconds since the Sonet/ Sdh component has been activated and been in unlocked state. All the other error counts that follow can be updated when this count is active.
OBJECT-TYPE    
  Counter32  

mscLpSonetErrorFreeSec 1.3.6.1.4.1.562.36.2.1.12.14.17.1.2
This attribute indicates the number of seconds that the Sonet/Sdh component has been in an near-end error free state.
OBJECT-TYPE    
  Counter32  

mscLpSonetSectCodeViolations 1.3.6.1.4.1.562.36.2.1.12.14.17.1.3
This attribute indicates the total number of Section Code Violations (SCVs) detected. A SCV corresponds to section BIP-8 error. SCV counting is inhibited for second intervals where a Section Severely Errored Second (SSES) is counted. The count wraps at its maximum value.
OBJECT-TYPE    
  Counter32  

mscLpSonetSectErroredSec 1.3.6.1.4.1.562.36.2.1.12.14.17.1.4
This attribute indicates the total number of Section Errored Seconds (SESs) that have been counted. A SES is declared for second intervals containing one or more SCVs or one or more Loss Of Signal (LOS) or Severely Errored Frame (SEF) defects. A SEF defect is the occurrence of 4 contiguous errored STS or STM frame alignment words.
OBJECT-TYPE    
  Counter32  

mscLpSonetSectSevErroredSec 1.3.6.1.4.1.562.36.2.1.12.14.17.1.5
This attribute indicates the total number of Section Severely Errored Seconds (SSESs) that have been counted. A SSES is declared for second intervals containing more than x SCVs or one or more LOS or SEF defects. The value of x is 155 for a 155 Mbits/sec interface.
OBJECT-TYPE    
  Counter32  

mscLpSonetSectLosSec 1.3.6.1.4.1.562.36.2.1.12.14.17.1.6
This attribute indicates the total number of Section LOS Seconds (SLOSSs) that have been counted. A SLOSS is declared for second intervals containing one or more LOS defects.
OBJECT-TYPE    
  Counter32  

mscLpSonetSectSevErroredFrmSec 1.3.6.1.4.1.562.36.2.1.12.14.17.1.7
This attribute indicates the total number of Section Severely Errored Frame Seconds (SSEFSs) that have been counted. A SSEFS is declared for second intervals containing one or more SEF defects.
OBJECT-TYPE    
  Counter32  

mscLpSonetSectFailures 1.3.6.1.4.1.562.36.2.1.12.14.17.1.8
This attribute indicates the total number of times that a section failure (LOS or LOF failure) has been declared.
OBJECT-TYPE    
  Counter32  

mscLpSonetLineCodeViolations 1.3.6.1.4.1.562.36.2.1.12.14.17.1.9
This attribute indicates the total number of Line Code Violations (LCVs) detected. A LCV corresponds to a line BIP-24 errors. LCV counting is inhibited for second intervals where a Line Severely Errored Second (LSES) is counted. Counting of LCVs is also inhibited over second intervals where a Line Unavailable Second (LUAS) is counted. The count wraps at its maximum value.
OBJECT-TYPE    
  Counter32  

mscLpSonetLineErroredSec 1.3.6.1.4.1.562.36.2.1.12.14.17.1.10
This attribute indicates the total number of Line Errored Seconds (LESs) that have been counted. A LES is declared for second intervals containing one or more LCVs or one or more line AIS defects. Counting of LES is inhibited over second intervals where a LUAS is counted.
OBJECT-TYPE    
  Counter32  

mscLpSonetLineSevErroredSec 1.3.6.1.4.1.562.36.2.1.12.14.17.1.11
This attribute indicates the total number of Line Severely Errored Seconds (LSESs) that have been counted. A LSES is declared for second intervals containing more than x LCVs or one or more L- AIS defects. The value of x is 154 for a 155 Mbits/sec interface. Counting of LSES is inhibited over second intervals where a LUAS is counted.
OBJECT-TYPE    
  Counter32  

mscLpSonetLineAisSec 1.3.6.1.4.1.562.36.2.1.12.14.17.1.12
This attribute indicates the total number of Line AIS Seconds (LAISSs) that have been counted. A LAISS is declared for second intervals containing one or more L-AIS defects. Counting of LAISS is inhibited over second intervals where a LUAS is counted.
OBJECT-TYPE    
  Counter32  

mscLpSonetLineUnavailSec 1.3.6.1.4.1.562.36.2.1.12.14.17.1.13
This attribute indicates the total number of one second intervals for which the STS line is unavailable. The STS line becomes unavailable at the onset of 10 consecutive LSESs. The 10 LSESs are included in the unavailable time. Once unavailable, the STS line becomes available at the onset of 10 contiguous seconds with no LSES. The 10 seconds with no LSES are excluded from the unavailable time. For second intervals where a Line Unavailable Second (LUAS) is counted, counting of LCV, LES, LSES and LAISS is inhibited.
OBJECT-TYPE    
  Counter32  

mscLpSonetLineFailures 1.3.6.1.4.1.562.36.2.1.12.14.17.1.14
This attribute indicates the total number of times that a line failure (L-AIS failure) has been declared.
OBJECT-TYPE    
  Counter32  

mscLpSonetFarEndLineErrorFreeSec 1.3.6.1.4.1.562.36.2.1.12.14.17.1.15
This attribute indicates the number of seconds that the Sonet/Sdh component has been in an far-end error free state.
OBJECT-TYPE    
  Counter32  

mscLpSonetFarEndLineCodeViolations 1.3.6.1.4.1.562.36.2.1.12.14.17.1.16
This attribute indicates the total number of line FEBE detected from the incoming line. The counting of line FEBE is inhibited for second intervals where a Far-End Line Severely Errored Second (FELSES) is counted. Counting of FELCVs is also inhibited over second intervals where a Far-End Line Unavailable Second (FELUAS) is counted. The count wraps at its maximum value.
OBJECT-TYPE    
  Counter32  

mscLpSonetFarEndLineErroredSec 1.3.6.1.4.1.562.36.2.1.12.14.17.1.17
This attribute indicates the total number of Far-End Line Errored Seconds (FELESs) that have been counted. A FELES is declared for second intervals containing one or more Far-End Line CVs (FELCVs) or one or more L-RDI defects. Counting of FELES is inhibited over second intervals where a FELUAS is counted.
OBJECT-TYPE    
  Counter32  

mscLpSonetFarEndLineSevErroredSec 1.3.6.1.4.1.562.36.2.1.12.14.17.1.18
This attribute indicates the total number of Far-End Line Severely Errored Seconds (FELSESs) that have been counted. A FELSES is declared for second intervals containing more than x FELCVs or one or more L-RDI defects. The value of x is 154 for a 155 Mbits/ sec interface. Counting of FELSES is inhibited over second intervals where a FELUAS is counted.
OBJECT-TYPE    
  Counter32  

mscLpSonetFarEndLineAisSec 1.3.6.1.4.1.562.36.2.1.12.14.17.1.19
This attribute indicates the total number of Far-End Line AIS Seconds (FELAISSs) that have been counted. A FELAISS is declared for second intervals one or more L-RDI defects. Counting of FELAISS is inhibited over second intervals where a FELUAS is counted.
OBJECT-TYPE    
  Counter32  

mscLpSonetFarEndLineUnavailSec 1.3.6.1.4.1.562.36.2.1.12.14.17.1.20
This attribute indicates the total number of one second intervals for which the STS far-end line is unavailable. The STS far-end line becomes unavailable at the onset of 10 consecutive FELSESs. The 10 FELSESs are included in the unavailable time. Once unavailable, the STS far-end line becomes available at the onset of 10 contiguous seconds with no FELSES. The 10 seconds with no FELSES are excluded from the unavailable time. For second intervals where a Far-End Line Unavailable Second (FELUAS) is counted, counting of FELCV, FELES, FELSES and FELAISS is inhibited.
OBJECT-TYPE    
  Counter32  

mscLpSonetFarEndLineFailures 1.3.6.1.4.1.562.36.2.1.12.14.17.1.21
This attribute indicates the total number of times that a far-end line failure (L-RFI failure) has been declared.
OBJECT-TYPE    
  Counter32  

mscLpSdh 1.3.6.1.4.1.562.36.2.1.12.15
OBJECT IDENTIFIER    

mscLpSdhRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.15.1
This entry controls the addition and deletion of mscLpSdh components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSdhRowStatusEntry

mscLpSdhRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.15.1.1
A single entry in the table represents a single mscLpSdh component.
OBJECT-TYPE    
  MscLpSdhRowStatusEntry  

mscLpSdhRowStatus 1.3.6.1.4.1.562.36.2.1.12.15.1.1.1
This variable is used as the basis for SNMP naming of mscLpSdh components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscLpSdhComponentName 1.3.6.1.4.1.562.36.2.1.12.15.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpSdhStorageType 1.3.6.1.4.1.562.36.2.1.12.15.1.1.4
This variable represents the storage type value for the mscLpSdh tables.
OBJECT-TYPE    
  StorageType  

mscLpSdhIndex 1.3.6.1.4.1.562.36.2.1.12.15.1.1.10
This variable represents the index for the mscLpSdh tables.
OBJECT-TYPE    
  Integer32 0..3  

mscLpSdhPath 1.3.6.1.4.1.562.36.2.1.12.15.2
OBJECT IDENTIFIER    

mscLpSdhPathRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.15.2.1
This entry controls the addition and deletion of mscLpSdhPath components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSdhPathRowStatusEntry

mscLpSdhPathRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.15.2.1.1
A single entry in the table represents a single mscLpSdhPath component.
OBJECT-TYPE    
  MscLpSdhPathRowStatusEntry  

mscLpSdhPathRowStatus 1.3.6.1.4.1.562.36.2.1.12.15.2.1.1.1
This variable is used as the basis for SNMP naming of mscLpSdhPath components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscLpSdhPathComponentName 1.3.6.1.4.1.562.36.2.1.12.15.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpSdhPathStorageType 1.3.6.1.4.1.562.36.2.1.12.15.2.1.1.4
This variable represents the storage type value for the mscLpSdhPath tables.
OBJECT-TYPE    
  StorageType  

mscLpSdhPathIndex 1.3.6.1.4.1.562.36.2.1.12.15.2.1.1.10
This variable represents the index for the mscLpSdhPath tables.
OBJECT-TYPE    
  Integer32 0..0  

mscLpSdhPathCell 1.3.6.1.4.1.562.36.2.1.12.15.2.2
OBJECT IDENTIFIER    

mscLpSdhPathCellRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.15.2.2.1
This entry controls the addition and deletion of mscLpSdhPathCell components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSdhPathCellRowStatusEntry

mscLpSdhPathCellRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.15.2.2.1.1
A single entry in the table represents a single mscLpSdhPathCell component.
OBJECT-TYPE    
  MscLpSdhPathCellRowStatusEntry  

mscLpSdhPathCellRowStatus 1.3.6.1.4.1.562.36.2.1.12.15.2.2.1.1.1
This variable is used as the basis for SNMP naming of mscLpSdhPathCell components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscLpSdhPathCellComponentName 1.3.6.1.4.1.562.36.2.1.12.15.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpSdhPathCellStorageType 1.3.6.1.4.1.562.36.2.1.12.15.2.2.1.1.4
This variable represents the storage type value for the mscLpSdhPathCell tables.
OBJECT-TYPE    
  StorageType  

mscLpSdhPathCellIndex 1.3.6.1.4.1.562.36.2.1.12.15.2.2.1.1.10
This variable represents the index for the mscLpSdhPathCell tables.
OBJECT-TYPE    
  NonReplicated  

mscLpSdhPathCellProvTable 1.3.6.1.4.1.562.36.2.1.12.15.2.2.10
This group contains the provisioning attributes for the AtmCell component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSdhPathCellProvEntry

mscLpSdhPathCellProvEntry 1.3.6.1.4.1.562.36.2.1.12.15.2.2.10.1
An entry in the mscLpSdhPathCellProvTable.
OBJECT-TYPE    
  MscLpSdhPathCellProvEntry  

mscLpSdhPathCellAlarmActDelay 1.3.6.1.4.1.562.36.2.1.12.15.2.2.10.1.1
This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
OBJECT-TYPE    
  Unsigned32 0..2000  

mscLpSdhPathCellScrambleCellPayload 1.3.6.1.4.1.562.36.2.1.12.15.2.2.10.1.2
Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscLpSdhPathCellCorrectSingleBitHeaderErrors 1.3.6.1.4.1.562.36.2.1.12.15.2.2.10.1.3
This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscLpSdhPathCellOperTable 1.3.6.1.4.1.562.36.2.1.12.15.2.2.11
This group contains the common operational attributes for the AtmCell component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSdhPathCellOperEntry

mscLpSdhPathCellOperEntry 1.3.6.1.4.1.562.36.2.1.12.15.2.2.11.1
An entry in the mscLpSdhPathCellOperTable.
OBJECT-TYPE    
  MscLpSdhPathCellOperEntry  

mscLpSdhPathCellLcdAlarm 1.3.6.1.4.1.562.36.2.1.12.15.2.2.11.1.1
This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpSdhPathCellStatsTable 1.3.6.1.4.1.562.36.2.1.12.15.2.2.12
This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSdhPathCellStatsEntry

mscLpSdhPathCellStatsEntry 1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1
An entry in the mscLpSdhPathCellStatsTable.
OBJECT-TYPE    
  MscLpSdhPathCellStatsEntry  

mscLpSdhPathCellUncorrectableHecErrors 1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1.1
This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
OBJECT-TYPE    
  Counter32  

mscLpSdhPathCellSevErroredSec 1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1.2
This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
OBJECT-TYPE    
  Counter32  

mscLpSdhPathCellReceiveCellUtilization 1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1.3
This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  Gauge32 0..100  

mscLpSdhPathCellTransmitCellUtilization 1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1.4
This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  Gauge32 0..100  

mscLpSdhPathCellCorrectableHeaderErrors 1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1.5
This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
OBJECT-TYPE    
  Counter32  

mscLpSdhPathProvTable 1.3.6.1.4.1.562.36.2.1.12.15.2.10
This group contains all of the provisioning data for a Sonet/Sdh Path component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSdhPathProvEntry

mscLpSdhPathProvEntry 1.3.6.1.4.1.562.36.2.1.12.15.2.10.1
An entry in the mscLpSdhPathProvTable.
OBJECT-TYPE    
  MscLpSdhPathProvEntry  

mscLpSdhPathApplicationFramerName 1.3.6.1.4.1.562.36.2.1.12.15.2.10.1.1
This attribute defines the link to the software stack. It defines which application is running on top of the Path component.
OBJECT-TYPE    
  Link  

mscLpSdhPathCidDataTable 1.3.6.1.4.1.562.36.2.1.12.15.2.11
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSdhPathCidDataEntry

mscLpSdhPathCidDataEntry 1.3.6.1.4.1.562.36.2.1.12.15.2.11.1
An entry in the mscLpSdhPathCidDataTable.
OBJECT-TYPE    
  MscLpSdhPathCidDataEntry  

mscLpSdhPathCustomerIdentifier 1.3.6.1.4.1.562.36.2.1.12.15.2.11.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

mscLpSdhPathStateTable 1.3.6.1.4.1.562.36.2.1.12.15.2.12
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSdhPathStateEntry

mscLpSdhPathStateEntry 1.3.6.1.4.1.562.36.2.1.12.15.2.12.1
An entry in the mscLpSdhPathStateTable.
OBJECT-TYPE    
  MscLpSdhPathStateEntry  

mscLpSdhPathAdminState 1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscLpSdhPathOperationalState 1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpSdhPathUsageState 1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscLpSdhPathAvailabilityStatus 1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

mscLpSdhPathProceduralStatus 1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpSdhPathControlStatus 1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpSdhPathAlarmStatus 1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpSdhPathStandbyStatus 1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

mscLpSdhPathUnknownStatus 1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

mscLpSdhPathIfEntryTable 1.3.6.1.4.1.562.36.2.1.12.15.2.13
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSdhPathIfEntryEntry

mscLpSdhPathIfEntryEntry 1.3.6.1.4.1.562.36.2.1.12.15.2.13.1
An entry in the mscLpSdhPathIfEntryTable.
OBJECT-TYPE    
  MscLpSdhPathIfEntryEntry  

mscLpSdhPathIfAdminStatus 1.3.6.1.4.1.562.36.2.1.12.15.2.13.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpSdhPathIfIndex 1.3.6.1.4.1.562.36.2.1.12.15.2.13.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscLpSdhPathOperStatusTable 1.3.6.1.4.1.562.36.2.1.12.15.2.14
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSdhPathOperStatusEntry

mscLpSdhPathOperStatusEntry 1.3.6.1.4.1.562.36.2.1.12.15.2.14.1
An entry in the mscLpSdhPathOperStatusTable.
OBJECT-TYPE    
  MscLpSdhPathOperStatusEntry  

mscLpSdhPathSnmpOperStatus 1.3.6.1.4.1.562.36.2.1.12.15.2.14.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpSdhPathOperTable 1.3.6.1.4.1.562.36.2.1.12.15.2.15
This group contains the common operational data for Path component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSdhPathOperEntry

mscLpSdhPathOperEntry 1.3.6.1.4.1.562.36.2.1.12.15.2.15.1
An entry in the mscLpSdhPathOperTable.
OBJECT-TYPE    
  MscLpSdhPathOperEntry  

mscLpSdhPathLopAlarm 1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.1
This attribute displays whether a Loss Of Pointer (LOP) alarm state has been entered. An LOP alarm state is entered when LOP defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOP defect occurs when no valid SPE or VC pointer was received in 8 contiguous frames. If the LOP defects are intermittently occurring, the LOP defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the LOP alarm condition is cleared. The condition is cleared when no more invalid pointer has been reported for 10 seconds +/- 0.5 seconds. The lopAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpSdhPathRxAisAlarm 1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.2
This attribute displays whether an Path Alarm Indication Signal (P- AIS) alarm state has been entered. An P-AIS alarm state is entered when P-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-AIS defect is the occurrence of the P-AIS signal in three contiguous valid STS or STM frames (all one's in bytes H1 and H2). If the P-AIS defects are intermittently occurring, the P-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-AIS alarm condition is cleared. The condition is cleared after no P-AIS defect has been detected for 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpSdhPathRxRfiAlarm 1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.3
This attribute displays whether the Path Remote Failure Indication (P-RFI) alarm state has been entered. An P-RFI alarm state is entered when Path Remote Defect Indicator (P-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-RDI defect is the occurrence of the P-RDI signal in five contiguous valid STS or STM frames (bit 5 of the G1 byte set to 1). If the P-RDI defects are intermittently occurring, the P-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10)with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-RFI alarm condition is cleared. The condition is cleared after no P-RDI defect has been detected for 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpSdhPathSignalLabelMismatch 1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.4
This attribute displays whether the Path Signal Label Mismatch (P- SLM) failure condition has been entered. An P-SLM failure condition is entered when P-SLM defects have been observed and accumulated for period of 2.5 seconds +/- 0.5 seconds. An P-SLM defect occurs when detecting an unexpected path signal label. The expected Path signal labels are 'Mapping for ATM' or 'Equipped - Non Specific Payload'. If the P-SLM defects are intermittently occurring, the P-SLM defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the Path Signal Label Mismatch failure condition is cleared. The condition is cleared when an expected path signal label is received for 10 seconds +/- 0.5 seconds. The signalLabelMismatch attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpSdhPathTxAis 1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.5
This attribute displays whether the Path Alarm Indication Signal (P- AIS) signal is being transmitted on the path. The P-AIS signal is transmitted when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpSdhPathTxRdi 1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.6
This attribute displays whether the Path Remote Defect Indicator (P-RDI) signal is being transmitted over the path signal. The P-RDI signal is transmitted over the outgoing line upon detection of LOP, P-AIS or the occurrence of the LCD state. This attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpSdhPathStatsTable 1.3.6.1.4.1.562.36.2.1.12.15.2.16
This group contains the statistics data for a Sonet/Sdh Path component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSdhPathStatsEntry

mscLpSdhPathStatsEntry 1.3.6.1.4.1.562.36.2.1.12.15.2.16.1
An entry in the mscLpSdhPathStatsTable.
OBJECT-TYPE    
  MscLpSdhPathStatsEntry  

mscLpSdhPathPathErrorFreeSec 1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.1
This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an near-end error free state.
OBJECT-TYPE    
  Counter32  

mscLpSdhPathPathCodeViolations 1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.2
This attribute indicates the total number of Path Code Violations (PCVs) detected. Each PCV corresponds to a path BIP-8 error. PCV counting is inhibited over second intervals where a Path Severely Errored Second (PSES) is counted. Counting of PCVs is also inhibited over second intervals where a Path Unavailable Second (PUAS) is counted. The count wraps at its maximum value.
OBJECT-TYPE    
  Counter32  

mscLpSdhPathPathErroredSec 1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.3
This attribute indicates the total number of Path Errored Seconds (PESs) that have been counted. A PES is declared for second intervals containing one or more PCVs or one or more LOP or path AIS defects. Counting of PES is inhibited when PUAS is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

mscLpSdhPathPathSevErroredSec 1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.4
This attribute indicates the total number of Path Severely Errored Seconds (PSESs) that have been counted. A PSES is declared for second intervals containing more than x PCVs or one or more LOP or path AIS defects. The value of x is 2400 for a 155 Mbits/sec interface. Counting of PSES is inhibited when PUAS is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

mscLpSdhPathPathAisLopSec 1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.5
This attribute indicates the total number of path AIS and LOP Seconds (PALSs). A PALS is declared for second intervals containing one or more path AIS or LOP defects. Counting of PALS is inhibited when PUAS is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

mscLpSdhPathPathUnavailSec 1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.6
This attribute indicates the total number of one second intervals for which the STS/STM path is unavailable. The path becomes unavailable at the onset of 10 consecutive PSESs. The 10 PSESs are included in the unavailable time. Once unavailable, the path becomes available at the onset of 10 contiguous seconds with no PSES. The 10 seconds with no PSES are excluded from the unavailable time. For second intervals where a Path Unavailable Second (PUAS) is counted, counting of PCV, PES, PSES and PALS is inhibited.
OBJECT-TYPE    
  Counter32  

mscLpSdhPathPathFailures 1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.7
This attribute indicates the total number of times that a path failure (LOP, P-AIS or Path Signal Label Mismatch failure) has been declared.
OBJECT-TYPE    
  Counter32  

mscLpSdhPathFarEndPathErrorFreeSec 1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.8
This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an far-end error free state.
OBJECT-TYPE    
  Counter32  

mscLpSdhPathFarEndPathCodeViolations 1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.9
This attribute indicates the total number of Far-End Path Code Violations (FEPCVs) detected. Each FEPCV corresponds to a path FEBE. FEPCV counting is inhibited over second intervals where a Far-End Path Severely Errored Second (FEPSES) is counted. Counting of PCVs is also inhibited over second intervals where a Far-End Path Unavailable Second (FEPUAS) is counted. The count wraps at its maximum value.
OBJECT-TYPE    
  Counter32  

mscLpSdhPathFarEndPathErroredSec 1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.10
This attribute indicates the total number of Far-End Path Errored Seconds (FEPESs) that have been counted. A FEPES is declared for second intervals containing one or more FEPCVs or one or more path RDI (P-RDI) defects. Counting of FEPES is inhibited when FEPUAS is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

mscLpSdhPathFarEndPathSevErroredSec 1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.11
This attribute indicates the total number of Far-End Path Severely Errored Seconds (FEPSESs) that have been counted. A FEPSES is declared for second intervals containing more than x FEPCVs or one or more P-RDI defects. The value of x is 2400 for a 155 Mbits/ sec interface. Counting of FEPSESs is inhibited when FEPUAS is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

mscLpSdhPathFarEndPathAisLopSec 1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.12
This attribute indicates the total number of Far-End Path AIS and LOP Seconds (FEPALSs). A FEPALS is declared for second intervals containing one or more P-RDI defects. Counting of FEPALS is inhibited when FEPUAS is counted over the monitored second.
OBJECT-TYPE    
  Counter32  

mscLpSdhPathFarEndPathUnavailSec 1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.13
This attribute indicates the total number of one second intervals for which the STS/STM far-end path is unavailable. The far-end path becomes unavailable at the onset of 10 consecutive FEPSESs. The 10 FEPSESs are included in the unavailable time. Once unavailable, the far-end path becomes available at the onset of 10 contiguous seconds with no FEPSES. The 10 seconds with no FEPSES are excluded from the unavailable time. For second intervals where a Far-End Path Unavailable Second (FEPUAS) is counted, counting of FEPCV, FEPES, FEPSES and FEPALS is inhibited.
OBJECT-TYPE    
  Counter32  

mscLpSdhPathFarEndPathFailures 1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.14
This attribute indicates the total number of times that a STS/STM far-end path failure (P-RFI failure) has been declared.
OBJECT-TYPE    
  Counter32  

mscLpSdhTest 1.3.6.1.4.1.562.36.2.1.12.15.3
OBJECT IDENTIFIER    

mscLpSdhTestRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.15.3.1
This entry controls the addition and deletion of mscLpSdhTest components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSdhTestRowStatusEntry

mscLpSdhTestRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.15.3.1.1
A single entry in the table represents a single mscLpSdhTest component.
OBJECT-TYPE    
  MscLpSdhTestRowStatusEntry  

mscLpSdhTestRowStatus 1.3.6.1.4.1.562.36.2.1.12.15.3.1.1.1
This variable is used as the basis for SNMP naming of mscLpSdhTest components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscLpSdhTestComponentName 1.3.6.1.4.1.562.36.2.1.12.15.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpSdhTestStorageType 1.3.6.1.4.1.562.36.2.1.12.15.3.1.1.4
This variable represents the storage type value for the mscLpSdhTest tables.
OBJECT-TYPE    
  StorageType  

mscLpSdhTestIndex 1.3.6.1.4.1.562.36.2.1.12.15.3.1.1.10
This variable represents the index for the mscLpSdhTest tables.
OBJECT-TYPE    
  NonReplicated  

mscLpSdhTestStateTable 1.3.6.1.4.1.562.36.2.1.12.15.3.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSdhTestStateEntry

mscLpSdhTestStateEntry 1.3.6.1.4.1.562.36.2.1.12.15.3.10.1
An entry in the mscLpSdhTestStateTable.
OBJECT-TYPE    
  MscLpSdhTestStateEntry  

mscLpSdhTestAdminState 1.3.6.1.4.1.562.36.2.1.12.15.3.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscLpSdhTestOperationalState 1.3.6.1.4.1.562.36.2.1.12.15.3.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpSdhTestUsageState 1.3.6.1.4.1.562.36.2.1.12.15.3.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscLpSdhTestSetupTable 1.3.6.1.4.1.562.36.2.1.12.15.3.11
This group contains all of the operational data for a Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSdhTestSetupEntry

mscLpSdhTestSetupEntry 1.3.6.1.4.1.562.36.2.1.12.15.3.11.1
An entry in the mscLpSdhTestSetupTable.
OBJECT-TYPE    
  MscLpSdhTestSetupEntry  

mscLpSdhTestPurpose 1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.1
This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
OBJECT-TYPE    
  AsciiString SIZE(0..40)  

mscLpSdhTestType 1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.2
This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
OBJECT-TYPE    
  INTEGER card(0), manual(1), localLoop(2), remoteLoop(3), externalLoop(4), payloadLoop(5), remoteLoopThisTrib(6), v54RemoteLoop(7), pn127RemoteLoop(8)  

mscLpSdhTestFrmSize 1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.3
This attribute defines the size of the test data frames in number of bytes.
OBJECT-TYPE    
  Unsigned32 4..4096  

mscLpSdhTestFrmPatternType 1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.4
This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
OBJECT-TYPE    
  INTEGER ccitt32kBitPattern(0), ccitt8MBitPattern(1), customizedPattern(2)  

mscLpSdhTestCustomizedPattern 1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.5
This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
OBJECT-TYPE    
  Hex 0..4294967295  

mscLpSdhTestDataStartDelay 1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.6
This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
OBJECT-TYPE    
  Unsigned32 0..1814400  

mscLpSdhTestDisplayInterval 1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.7
This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
OBJECT-TYPE    
  Unsigned32 0..30240  

mscLpSdhTestDuration 1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.8
This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
OBJECT-TYPE    
  Unsigned32 1..30240  

mscLpSdhTestResultsTable 1.3.6.1.4.1.562.36.2.1.12.15.3.12
This group contains all the statistics related attributes of the Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSdhTestResultsEntry

mscLpSdhTestResultsEntry 1.3.6.1.4.1.562.36.2.1.12.15.3.12.1
An entry in the mscLpSdhTestResultsTable.
OBJECT-TYPE    
  MscLpSdhTestResultsEntry  

mscLpSdhTestElapsedTime 1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.1
This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
OBJECT-TYPE    
  Counter32  

mscLpSdhTestTimeRemaining 1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.2
This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscLpSdhTestCauseOfTermination 1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.3
This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4), hardwareReconfigured(5), loopCodeSyncFailed(6), patternSyncFailed(7), patternSyncLost(8)  

mscLpSdhTestBitsTx 1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.4
This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpSdhTestBytesTx 1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.5
This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpSdhTestFrmTx 1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.6
This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpSdhTestBitsRx 1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.7
This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpSdhTestBytesRx 1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.8
This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpSdhTestFrmRx 1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.9
This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpSdhTestErroredFrmRx 1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.10
This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpSdhTestBitErrorRate 1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.11
This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
OBJECT-TYPE    
  AsciiString SIZE(5)  

mscLpSdhProvTable 1.3.6.1.4.1.562.36.2.1.12.15.10
This group contains all of the provisioning data for a Sonet or Sdh component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSdhProvEntry

mscLpSdhProvEntry 1.3.6.1.4.1.562.36.2.1.12.15.10.1
An entry in the mscLpSdhProvTable.
OBJECT-TYPE    
  MscLpSdhProvEntry  

mscLpSdhClockingSource 1.3.6.1.4.1.562.36.2.1.12.15.10.1.1
This attribute defines the type of clocking source used for synchronizing the OC-3 transmit clock: local means direct use of the local clock oscillator at its centre frequency; line means the use of a signal phase-locked to the incoming OC-3 line rate; module means the use of a signal phase-locked to the CP reference clock. When adding a Sonet/Sdh component, the clockingSource attribute is set to module if the NetworkSynchronization component has been added and is set to local otherwise. Note that the multiport OC-3 cell-based cards has one common clock source for each of the three ports when either the clocking source local or module is selected. For this reason, it is not allowed to have at the same time the clockingSource attribute set to local on one port and module on another port. Furthermore, the clockingSource attribute cannot be set to module if the NetworkSynchronization component has not been added.
OBJECT-TYPE    
  INTEGER local(0), line(1), module(2)  

mscLpSdhCidDataTable 1.3.6.1.4.1.562.36.2.1.12.15.11
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSdhCidDataEntry

mscLpSdhCidDataEntry 1.3.6.1.4.1.562.36.2.1.12.15.11.1
An entry in the mscLpSdhCidDataTable.
OBJECT-TYPE    
  MscLpSdhCidDataEntry  

mscLpSdhCustomerIdentifier 1.3.6.1.4.1.562.36.2.1.12.15.11.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

mscLpSdhAdminInfoTable 1.3.6.1.4.1.562.36.2.1.12.15.12
This group contains the attributes pertaining to the vendor of the equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSdhAdminInfoEntry

mscLpSdhAdminInfoEntry 1.3.6.1.4.1.562.36.2.1.12.15.12.1
An entry in the mscLpSdhAdminInfoTable.
OBJECT-TYPE    
  MscLpSdhAdminInfoEntry  

mscLpSdhVendor 1.3.6.1.4.1.562.36.2.1.12.15.12.1.1
This is the name of the vendor supplying the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..20)  

mscLpSdhCommentText 1.3.6.1.4.1.562.36.2.1.12.15.12.1.2
Any miscellaneous text about the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..60)  

mscLpSdhIfEntryTable 1.3.6.1.4.1.562.36.2.1.12.15.13
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSdhIfEntryEntry

mscLpSdhIfEntryEntry 1.3.6.1.4.1.562.36.2.1.12.15.13.1
An entry in the mscLpSdhIfEntryTable.
OBJECT-TYPE    
  MscLpSdhIfEntryEntry  

mscLpSdhIfAdminStatus 1.3.6.1.4.1.562.36.2.1.12.15.13.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpSdhIfIndex 1.3.6.1.4.1.562.36.2.1.12.15.13.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscLpSdhOperStatusTable 1.3.6.1.4.1.562.36.2.1.12.15.14
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSdhOperStatusEntry

mscLpSdhOperStatusEntry 1.3.6.1.4.1.562.36.2.1.12.15.14.1
An entry in the mscLpSdhOperStatusTable.
OBJECT-TYPE    
  MscLpSdhOperStatusEntry  

mscLpSdhSnmpOperStatus 1.3.6.1.4.1.562.36.2.1.12.15.14.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpSdhStateTable 1.3.6.1.4.1.562.36.2.1.12.15.15
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSdhStateEntry

mscLpSdhStateEntry 1.3.6.1.4.1.562.36.2.1.12.15.15.1
An entry in the mscLpSdhStateTable.
OBJECT-TYPE    
  MscLpSdhStateEntry  

mscLpSdhAdminState 1.3.6.1.4.1.562.36.2.1.12.15.15.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscLpSdhOperationalState 1.3.6.1.4.1.562.36.2.1.12.15.15.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpSdhUsageState 1.3.6.1.4.1.562.36.2.1.12.15.15.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscLpSdhAvailabilityStatus 1.3.6.1.4.1.562.36.2.1.12.15.15.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

mscLpSdhProceduralStatus 1.3.6.1.4.1.562.36.2.1.12.15.15.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpSdhControlStatus 1.3.6.1.4.1.562.36.2.1.12.15.15.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpSdhAlarmStatus 1.3.6.1.4.1.562.36.2.1.12.15.15.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpSdhStandbyStatus 1.3.6.1.4.1.562.36.2.1.12.15.15.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

mscLpSdhUnknownStatus 1.3.6.1.4.1.562.36.2.1.12.15.15.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

mscLpSdhOperTable 1.3.6.1.4.1.562.36.2.1.12.15.16
This group contains the common operational data for Sonet or Sdh component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSdhOperEntry

mscLpSdhOperEntry 1.3.6.1.4.1.562.36.2.1.12.15.16.1
An entry in the mscLpSdhOperTable.
OBJECT-TYPE    
  MscLpSdhOperEntry  

mscLpSdhLosAlarm 1.3.6.1.4.1.562.36.2.1.12.15.16.1.1
This attribute indicates whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds, or if an LOS defect is present when the criteria for LOF failure declaration have been met. A LOS defect is declared when 20+/-3 us of all-zeros pattern is detected. The LOS defect is cleared when two valid framing words are detected and no Loss Of Signal condition is detected during an interval of 20+/-3 us. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the LOS alarm condition is cleared. The LOS alarm state is cleared after LOS defects have been absent for a period of 10 seconds +/- 0.5 seconds. The losAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpSdhLofAlarm 1.3.6.1.4.1.562.36.2.1.12.15.16.1.2
This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when LOF defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds, except when an LOS defect or failure is present. An LOF defect is detected when getting contiguous errored frame alignment for at least 3 msec. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the LOF alarm condition is cleared. The condition is cleared when framing has been achieved for a period of 10 seconds +/- 0.5 seconds. The lofAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpSdhRxAisAlarm 1.3.6.1.4.1.562.36.2.1.12.15.16.1.3
This attribute displays whether a Line Alarm Indication Signal (L- AIS) alarm state has been entered. An L-AIS alarm state is entered when L-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-AIS defect is the occurrence of the L-AIS signal in five contiguous STS (STM) frames (111 pattern in bits 6,7, and 8 of the K2 bytes). If the L-AIS defects are intermittently occurring, the L-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-AIS alarm condition is cleared. The condition is cleared after not detecting the L-AIS signal for a period of 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpSdhRxRfiAlarm 1.3.6.1.4.1.562.36.2.1.12.15.16.1.4
This attribute displays whether a Line Remote Failure Indication (LRFI) alarm state has been entered. An L-RFI alarm state is entered when Line Remote Failure Indication (L-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-RDI defect is the occurrence of the L-RDI signal in five contiguous valid STS (STM) frame (110 pattern in bits 6,7, and 8 of the K2 bytes). If the L-RDI defects are intermittently occurring, the L-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-RFI alarm condition is cleared. The condition is cleared after not detecting the L-RDI signal for a period of 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpSdhTxAis 1.3.6.1.4.1.562.36.2.1.12.15.16.1.5
This attribute displays whether the Line Alarm Indication Signal (L- AIS) signal is being transmitted on the outgoing line. This signal is transmitted when the Sonet/Sdh is locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpSdhTxRdi 1.3.6.1.4.1.562.36.2.1.12.15.16.1.6
This attribute displays whether the Line Remote Defect Indicator (L-RDI) signal is being transmitted over the OC-3 line. The L-RDI signal is transmitted upon the detection of the LOS, LOF or L-AIS defect. This attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpSdhUnusableTxClockRefAlarm 1.3.6.1.4.1.562.36.2.1.12.15.16.1.7
This attribute displays whether an Unusable Transmit Clock Reference (UTCR) alarm state has been entered. A UTCR alarm state is entered when a Sonet/Sdh port provisioned to act as a transmit clock reference has received the code 'do not use for synchronization' in the S1 byte (in the SONET/ SDH line overhead) for 2.5 +/- 0.5 seconds. The condition is cleared after not detecting the 'do not use for synchronization' code for a period of 10 +/- 0.5 seconds or when the port is no longer provisioned to act as a transmit clock reference. A port is acting as a transmit clock reference if it is provisioned with a) a clockingSource of line, or b) it has been provisioned as a primaryReference, secondaryReference or tertiaryReference in the NetworkSynchronization component. The unusableTxClockRefAlarm attribute is always set to off when the component has been locked and left offline.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpSdhStatsTable 1.3.6.1.4.1.562.36.2.1.12.15.17
This group contains the statistics data for a Sonet or Sdh component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpSdhStatsEntry

mscLpSdhStatsEntry 1.3.6.1.4.1.562.36.2.1.12.15.17.1
An entry in the mscLpSdhStatsTable.
OBJECT-TYPE    
  MscLpSdhStatsEntry  

mscLpSdhRunningTime 1.3.6.1.4.1.562.36.2.1.12.15.17.1.1
This attribute indicates the total number of seconds since the Sonet/ Sdh component has been activated and been in unlocked state. All the other error counts that follow can be updated when this count is active.
OBJECT-TYPE    
  Counter32  

mscLpSdhErrorFreeSec 1.3.6.1.4.1.562.36.2.1.12.15.17.1.2
This attribute indicates the number of seconds that the Sonet/Sdh component has been in an near-end error free state.
OBJECT-TYPE    
  Counter32  

mscLpSdhSectCodeViolations 1.3.6.1.4.1.562.36.2.1.12.15.17.1.3
This attribute indicates the total number of Section Code Violations (SCVs) detected. A SCV corresponds to section BIP-8 error. SCV counting is inhibited for second intervals where a Section Severely Errored Second (SSES) is counted. The count wraps at its maximum value.
OBJECT-TYPE    
  Counter32  

mscLpSdhSectErroredSec 1.3.6.1.4.1.562.36.2.1.12.15.17.1.4
This attribute indicates the total number of Section Errored Seconds (SESs) that have been counted. A SES is declared for second intervals containing one or more SCVs or one or more Loss Of Signal (LOS) or Severely Errored Frame (SEF) defects. A SEF defect is the occurrence of 4 contiguous errored STS or STM frame alignment words.
OBJECT-TYPE    
  Counter32  

mscLpSdhSectSevErroredSec 1.3.6.1.4.1.562.36.2.1.12.15.17.1.5
This attribute indicates the total number of Section Severely Errored Seconds (SSESs) that have been counted. A SSES is declared for second intervals containing more than x SCVs or one or more LOS or SEF defects. The value of x is 155 for a 155 Mbits/sec interface.
OBJECT-TYPE    
  Counter32  

mscLpSdhSectLosSec 1.3.6.1.4.1.562.36.2.1.12.15.17.1.6
This attribute indicates the total number of Section LOS Seconds (SLOSSs) that have been counted. A SLOSS is declared for second intervals containing one or more LOS defects.
OBJECT-TYPE    
  Counter32  

mscLpSdhSectSevErroredFrmSec 1.3.6.1.4.1.562.36.2.1.12.15.17.1.7
This attribute indicates the total number of Section Severely Errored Frame Seconds (SSEFSs) that have been counted. A SSEFS is declared for second intervals containing one or more SEF defects.
OBJECT-TYPE    
  Counter32  

mscLpSdhSectFailures 1.3.6.1.4.1.562.36.2.1.12.15.17.1.8
This attribute indicates the total number of times that a section failure (LOS or LOF failure) has been declared.
OBJECT-TYPE    
  Counter32  

mscLpSdhLineCodeViolations 1.3.6.1.4.1.562.36.2.1.12.15.17.1.9
This attribute indicates the total number of Line Code Violations (LCVs) detected. A LCV corresponds to a line BIP-24 errors. LCV counting is inhibited for second intervals where a Line Severely Errored Second (LSES) is counted. Counting of LCVs is also inhibited over second intervals where a Line Unavailable Second (LUAS) is counted. The count wraps at its maximum value.
OBJECT-TYPE    
  Counter32  

mscLpSdhLineErroredSec 1.3.6.1.4.1.562.36.2.1.12.15.17.1.10
This attribute indicates the total number of Line Errored Seconds (LESs) that have been counted. A LES is declared for second intervals containing one or more LCVs or one or more line AIS defects. Counting of LES is inhibited over second intervals where a LUAS is counted.
OBJECT-TYPE    
  Counter32  

mscLpSdhLineSevErroredSec 1.3.6.1.4.1.562.36.2.1.12.15.17.1.11
This attribute indicates the total number of Line Severely Errored Seconds (LSESs) that have been counted. A LSES is declared for second intervals containing more than x LCVs or one or more L- AIS defects. The value of x is 154 for a 155 Mbits/sec interface. Counting of LSES is inhibited over second intervals where a LUAS is counted.
OBJECT-TYPE    
  Counter32  

mscLpSdhLineAisSec 1.3.6.1.4.1.562.36.2.1.12.15.17.1.12
This attribute indicates the total number of Line AIS Seconds (LAISSs) that have been counted. A LAISS is declared for second intervals containing one or more L-AIS defects. Counting of LAISS is inhibited over second intervals where a LUAS is counted.
OBJECT-TYPE    
  Counter32  

mscLpSdhLineUnavailSec 1.3.6.1.4.1.562.36.2.1.12.15.17.1.13
This attribute indicates the total number of one second intervals for which the STS line is unavailable. The STS line becomes unavailable at the onset of 10 consecutive LSESs. The 10 LSESs are included in the unavailable time. Once unavailable, the STS line becomes available at the onset of 10 contiguous seconds with no LSES. The 10 seconds with no LSES are excluded from the unavailable time. For second intervals where a Line Unavailable Second (LUAS) is counted, counting of LCV, LES, LSES and LAISS is inhibited.
OBJECT-TYPE    
  Counter32  

mscLpSdhLineFailures 1.3.6.1.4.1.562.36.2.1.12.15.17.1.14
This attribute indicates the total number of times that a line failure (L-AIS failure) has been declared.
OBJECT-TYPE    
  Counter32  

mscLpSdhFarEndLineErrorFreeSec 1.3.6.1.4.1.562.36.2.1.12.15.17.1.15
This attribute indicates the number of seconds that the Sonet/Sdh component has been in an far-end error free state.
OBJECT-TYPE    
  Counter32  

mscLpSdhFarEndLineCodeViolations 1.3.6.1.4.1.562.36.2.1.12.15.17.1.16
This attribute indicates the total number of line FEBE detected from the incoming line. The counting of line FEBE is inhibited for second intervals where a Far-End Line Severely Errored Second (FELSES) is counted. Counting of FELCVs is also inhibited over second intervals where a Far-End Line Unavailable Second (FELUAS) is counted. The count wraps at its maximum value.
OBJECT-TYPE    
  Counter32  

mscLpSdhFarEndLineErroredSec 1.3.6.1.4.1.562.36.2.1.12.15.17.1.17
This attribute indicates the total number of Far-End Line Errored Seconds (FELESs) that have been counted. A FELES is declared for second intervals containing one or more Far-End Line CVs (FELCVs) or one or more L-RDI defects. Counting of FELES is inhibited over second intervals where a FELUAS is counted.
OBJECT-TYPE    
  Counter32  

mscLpSdhFarEndLineSevErroredSec 1.3.6.1.4.1.562.36.2.1.12.15.17.1.18
This attribute indicates the total number of Far-End Line Severely Errored Seconds (FELSESs) that have been counted. A FELSES is declared for second intervals containing more than x FELCVs or one or more L-RDI defects. The value of x is 154 for a 155 Mbits/ sec interface. Counting of FELSES is inhibited over second intervals where a FELUAS is counted.
OBJECT-TYPE    
  Counter32  

mscLpSdhFarEndLineAisSec 1.3.6.1.4.1.562.36.2.1.12.15.17.1.19
This attribute indicates the total number of Far-End Line AIS Seconds (FELAISSs) that have been counted. A FELAISS is declared for second intervals one or more L-RDI defects. Counting of FELAISS is inhibited over second intervals where a FELUAS is counted.
OBJECT-TYPE    
  Counter32  

mscLpSdhFarEndLineUnavailSec 1.3.6.1.4.1.562.36.2.1.12.15.17.1.20
This attribute indicates the total number of one second intervals for which the STS far-end line is unavailable. The STS far-end line becomes unavailable at the onset of 10 consecutive FELSESs. The 10 FELSESs are included in the unavailable time. Once unavailable, the STS far-end line becomes available at the onset of 10 contiguous seconds with no FELSES. The 10 seconds with no FELSES are excluded from the unavailable time. For second intervals where a Far-End Line Unavailable Second (FELUAS) is counted, counting of FELCV, FELES, FELSES and FELAISS is inhibited.
OBJECT-TYPE    
  Counter32  

mscLpSdhFarEndLineFailures 1.3.6.1.4.1.562.36.2.1.12.15.17.1.21
This attribute indicates the total number of times that a far-end line failure (L-RFI failure) has been declared.
OBJECT-TYPE    
  Counter32  

mscLpJT2 1.3.6.1.4.1.562.36.2.1.12.16
OBJECT IDENTIFIER    

mscLpJT2RowStatusTable 1.3.6.1.4.1.562.36.2.1.12.16.1
This entry controls the addition and deletion of mscLpJT2 components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpJT2RowStatusEntry

mscLpJT2RowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.16.1.1
A single entry in the table represents a single mscLpJT2 component.
OBJECT-TYPE    
  MscLpJT2RowStatusEntry  

mscLpJT2RowStatus 1.3.6.1.4.1.562.36.2.1.12.16.1.1.1
This variable is used as the basis for SNMP naming of mscLpJT2 components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscLpJT2ComponentName 1.3.6.1.4.1.562.36.2.1.12.16.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpJT2StorageType 1.3.6.1.4.1.562.36.2.1.12.16.1.1.4
This variable represents the storage type value for the mscLpJT2 tables.
OBJECT-TYPE    
  StorageType  

mscLpJT2Index 1.3.6.1.4.1.562.36.2.1.12.16.1.1.10
This variable represents the index for the mscLpJT2 tables.
OBJECT-TYPE    
  Integer32 0..1  

mscLpJT2Test 1.3.6.1.4.1.562.36.2.1.12.16.2
OBJECT IDENTIFIER    

mscLpJT2TestRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.16.2.1
This entry controls the addition and deletion of mscLpJT2Test components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpJT2TestRowStatusEntry

mscLpJT2TestRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.16.2.1.1
A single entry in the table represents a single mscLpJT2Test component.
OBJECT-TYPE    
  MscLpJT2TestRowStatusEntry  

mscLpJT2TestRowStatus 1.3.6.1.4.1.562.36.2.1.12.16.2.1.1.1
This variable is used as the basis for SNMP naming of mscLpJT2Test components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscLpJT2TestComponentName 1.3.6.1.4.1.562.36.2.1.12.16.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpJT2TestStorageType 1.3.6.1.4.1.562.36.2.1.12.16.2.1.1.4
This variable represents the storage type value for the mscLpJT2Test tables.
OBJECT-TYPE    
  StorageType  

mscLpJT2TestIndex 1.3.6.1.4.1.562.36.2.1.12.16.2.1.1.10
This variable represents the index for the mscLpJT2Test tables.
OBJECT-TYPE    
  NonReplicated  

mscLpJT2TestStateTable 1.3.6.1.4.1.562.36.2.1.12.16.2.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpJT2TestStateEntry

mscLpJT2TestStateEntry 1.3.6.1.4.1.562.36.2.1.12.16.2.10.1
An entry in the mscLpJT2TestStateTable.
OBJECT-TYPE    
  MscLpJT2TestStateEntry  

mscLpJT2TestAdminState 1.3.6.1.4.1.562.36.2.1.12.16.2.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscLpJT2TestOperationalState 1.3.6.1.4.1.562.36.2.1.12.16.2.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpJT2TestUsageState 1.3.6.1.4.1.562.36.2.1.12.16.2.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscLpJT2TestSetupTable 1.3.6.1.4.1.562.36.2.1.12.16.2.11
This group contains all of the operational data for a Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpJT2TestSetupEntry

mscLpJT2TestSetupEntry 1.3.6.1.4.1.562.36.2.1.12.16.2.11.1
An entry in the mscLpJT2TestSetupTable.
OBJECT-TYPE    
  MscLpJT2TestSetupEntry  

mscLpJT2TestPurpose 1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.1
This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
OBJECT-TYPE    
  AsciiString SIZE(0..40)  

mscLpJT2TestType 1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.2
This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
OBJECT-TYPE    
  INTEGER card(0), manual(1), localLoop(2), remoteLoop(3), externalLoop(4), payloadLoop(5), remoteLoopThisTrib(6), v54RemoteLoop(7), pn127RemoteLoop(8)  

mscLpJT2TestFrmSize 1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.3
This attribute defines the size of the test data frames in number of bytes.
OBJECT-TYPE    
  Unsigned32 4..4096  

mscLpJT2TestFrmPatternType 1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.4
This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
OBJECT-TYPE    
  INTEGER ccitt32kBitPattern(0), ccitt8MBitPattern(1), customizedPattern(2)  

mscLpJT2TestCustomizedPattern 1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.5
This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
OBJECT-TYPE    
  Hex 0..4294967295  

mscLpJT2TestDataStartDelay 1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.6
This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
OBJECT-TYPE    
  Unsigned32 0..1814400  

mscLpJT2TestDisplayInterval 1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.7
This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
OBJECT-TYPE    
  Unsigned32 0..30240  

mscLpJT2TestDuration 1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.8
This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
OBJECT-TYPE    
  Unsigned32 1..30240  

mscLpJT2TestResultsTable 1.3.6.1.4.1.562.36.2.1.12.16.2.12
This group contains all the statistics related attributes of the Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpJT2TestResultsEntry

mscLpJT2TestResultsEntry 1.3.6.1.4.1.562.36.2.1.12.16.2.12.1
An entry in the mscLpJT2TestResultsTable.
OBJECT-TYPE    
  MscLpJT2TestResultsEntry  

mscLpJT2TestElapsedTime 1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.1
This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
OBJECT-TYPE    
  Counter32  

mscLpJT2TestTimeRemaining 1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.2
This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscLpJT2TestCauseOfTermination 1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.3
This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4), hardwareReconfigured(5), loopCodeSyncFailed(6), patternSyncFailed(7), patternSyncLost(8)  

mscLpJT2TestBitsTx 1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.4
This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpJT2TestBytesTx 1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.5
This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpJT2TestFrmTx 1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.6
This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpJT2TestBitsRx 1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.7
This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpJT2TestBytesRx 1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.8
This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpJT2TestFrmRx 1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.9
This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpJT2TestErroredFrmRx 1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.10
This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpJT2TestBitErrorRate 1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.11
This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
OBJECT-TYPE    
  AsciiString SIZE(5)  

mscLpJT2Cell 1.3.6.1.4.1.562.36.2.1.12.16.3
OBJECT IDENTIFIER    

mscLpJT2CellRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.16.3.1
This entry controls the addition and deletion of mscLpJT2Cell components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpJT2CellRowStatusEntry

mscLpJT2CellRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.16.3.1.1
A single entry in the table represents a single mscLpJT2Cell component.
OBJECT-TYPE    
  MscLpJT2CellRowStatusEntry  

mscLpJT2CellRowStatus 1.3.6.1.4.1.562.36.2.1.12.16.3.1.1.1
This variable is used as the basis for SNMP naming of mscLpJT2Cell components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscLpJT2CellComponentName 1.3.6.1.4.1.562.36.2.1.12.16.3.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpJT2CellStorageType 1.3.6.1.4.1.562.36.2.1.12.16.3.1.1.4
This variable represents the storage type value for the mscLpJT2Cell tables.
OBJECT-TYPE    
  StorageType  

mscLpJT2CellIndex 1.3.6.1.4.1.562.36.2.1.12.16.3.1.1.10
This variable represents the index for the mscLpJT2Cell tables.
OBJECT-TYPE    
  NonReplicated  

mscLpJT2CellProvTable 1.3.6.1.4.1.562.36.2.1.12.16.3.10
This group contains the provisioning attributes for the AtmCell component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpJT2CellProvEntry

mscLpJT2CellProvEntry 1.3.6.1.4.1.562.36.2.1.12.16.3.10.1
An entry in the mscLpJT2CellProvTable.
OBJECT-TYPE    
  MscLpJT2CellProvEntry  

mscLpJT2CellAlarmActDelay 1.3.6.1.4.1.562.36.2.1.12.16.3.10.1.1
This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
OBJECT-TYPE    
  Unsigned32 0..2000  

mscLpJT2CellScrambleCellPayload 1.3.6.1.4.1.562.36.2.1.12.16.3.10.1.2
Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscLpJT2CellCorrectSingleBitHeaderErrors 1.3.6.1.4.1.562.36.2.1.12.16.3.10.1.3
This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

mscLpJT2CellOperTable 1.3.6.1.4.1.562.36.2.1.12.16.3.11
This group contains the common operational attributes for the AtmCell component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpJT2CellOperEntry

mscLpJT2CellOperEntry 1.3.6.1.4.1.562.36.2.1.12.16.3.11.1
An entry in the mscLpJT2CellOperTable.
OBJECT-TYPE    
  MscLpJT2CellOperEntry  

mscLpJT2CellLcdAlarm 1.3.6.1.4.1.562.36.2.1.12.16.3.11.1.1
This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpJT2CellStatsTable 1.3.6.1.4.1.562.36.2.1.12.16.3.12
This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpJT2CellStatsEntry

mscLpJT2CellStatsEntry 1.3.6.1.4.1.562.36.2.1.12.16.3.12.1
An entry in the mscLpJT2CellStatsTable.
OBJECT-TYPE    
  MscLpJT2CellStatsEntry  

mscLpJT2CellUncorrectableHecErrors 1.3.6.1.4.1.562.36.2.1.12.16.3.12.1.1
This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
OBJECT-TYPE    
  Counter32  

mscLpJT2CellSevErroredSec 1.3.6.1.4.1.562.36.2.1.12.16.3.12.1.2
This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
OBJECT-TYPE    
  Counter32  

mscLpJT2CellReceiveCellUtilization 1.3.6.1.4.1.562.36.2.1.12.16.3.12.1.3
This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  Gauge32 0..100  

mscLpJT2CellTransmitCellUtilization 1.3.6.1.4.1.562.36.2.1.12.16.3.12.1.4
This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
OBJECT-TYPE    
  Gauge32 0..100  

mscLpJT2CellCorrectableHeaderErrors 1.3.6.1.4.1.562.36.2.1.12.16.3.12.1.5
This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
OBJECT-TYPE    
  Counter32  

mscLpJT2CidDataTable 1.3.6.1.4.1.562.36.2.1.12.16.10
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpJT2CidDataEntry

mscLpJT2CidDataEntry 1.3.6.1.4.1.562.36.2.1.12.16.10.1
An entry in the mscLpJT2CidDataTable.
OBJECT-TYPE    
  MscLpJT2CidDataEntry  

mscLpJT2CustomerIdentifier 1.3.6.1.4.1.562.36.2.1.12.16.10.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

mscLpJT2ProvTable 1.3.6.1.4.1.562.36.2.1.12.16.11
This group contains all of the JT2 specific provisioning data for a JT2 component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpJT2ProvEntry

mscLpJT2ProvEntry 1.3.6.1.4.1.562.36.2.1.12.16.11.1
An entry in the mscLpJT2ProvTable.
OBJECT-TYPE    
  MscLpJT2ProvEntry  

mscLpJT2ClockingSource 1.3.6.1.4.1.562.36.2.1.12.16.11.1.1
This attribute defines the source of the transmit clock for the JT2 line. When the clocking source is selected from local, the oscillator on the port generates the clocking for the line. When the clocking source is selected from line, the port synchronizes to the clock recovered from the incoming line signal. When the clocking source is selected from module, the port's clock synchronizes to the clock provided by the oscillator on the active CP. Note:- that when one port is set to local, the other port must also be set to local, and when one port is set to module, the other port must also be set to module. If one of the ports is set to line, the other port must be set to otherPort. Also, if a CP reference clock is available when the JT2 component is added, the clocking source defaults to module, whereas if a CP reference clock is not available when the component is added, the clocking source defaults to local.
OBJECT-TYPE    
  INTEGER local(0), line(1), module(2), otherPort(4)  

mscLpJT2LineLength 1.3.6.1.4.1.562.36.2.1.12.16.11.1.2
This attribute defines the line length for equalization calculations for the JT2 line. The range is between 0 and 480 feet (1 metre = 3.28 feet).
OBJECT-TYPE    
  Unsigned32 0..480  

mscLpJT2ApplicationFramerName 1.3.6.1.4.1.562.36.2.1.12.16.11.1.3
This attribute defines the link to the software stack. It defines which application is running on top of the JT2 component.
OBJECT-TYPE    
  Link  

mscLpJT2IfEntryTable 1.3.6.1.4.1.562.36.2.1.12.16.12
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpJT2IfEntryEntry

mscLpJT2IfEntryEntry 1.3.6.1.4.1.562.36.2.1.12.16.12.1
An entry in the mscLpJT2IfEntryTable.
OBJECT-TYPE    
  MscLpJT2IfEntryEntry  

mscLpJT2IfAdminStatus 1.3.6.1.4.1.562.36.2.1.12.16.12.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpJT2IfIndex 1.3.6.1.4.1.562.36.2.1.12.16.12.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscLpJT2OperStatusTable 1.3.6.1.4.1.562.36.2.1.12.16.13
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpJT2OperStatusEntry

mscLpJT2OperStatusEntry 1.3.6.1.4.1.562.36.2.1.12.16.13.1
An entry in the mscLpJT2OperStatusTable.
OBJECT-TYPE    
  MscLpJT2OperStatusEntry  

mscLpJT2SnmpOperStatus 1.3.6.1.4.1.562.36.2.1.12.16.13.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpJT2StateTable 1.3.6.1.4.1.562.36.2.1.12.16.14
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpJT2StateEntry

mscLpJT2StateEntry 1.3.6.1.4.1.562.36.2.1.12.16.14.1
An entry in the mscLpJT2StateTable.
OBJECT-TYPE    
  MscLpJT2StateEntry  

mscLpJT2AdminState 1.3.6.1.4.1.562.36.2.1.12.16.14.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscLpJT2OperationalState 1.3.6.1.4.1.562.36.2.1.12.16.14.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpJT2UsageState 1.3.6.1.4.1.562.36.2.1.12.16.14.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscLpJT2AvailabilityStatus 1.3.6.1.4.1.562.36.2.1.12.16.14.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

mscLpJT2ProceduralStatus 1.3.6.1.4.1.562.36.2.1.12.16.14.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpJT2ControlStatus 1.3.6.1.4.1.562.36.2.1.12.16.14.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpJT2AlarmStatus 1.3.6.1.4.1.562.36.2.1.12.16.14.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpJT2StandbyStatus 1.3.6.1.4.1.562.36.2.1.12.16.14.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

mscLpJT2UnknownStatus 1.3.6.1.4.1.562.36.2.1.12.16.14.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

mscLpJT2OperTable 1.3.6.1.4.1.562.36.2.1.12.16.15
This group contains the JT2 specific operational data for a JT2 component in a digital hierarchy interface.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpJT2OperEntry

mscLpJT2OperEntry 1.3.6.1.4.1.562.36.2.1.12.16.15.1
An entry in the mscLpJT2OperTable.
OBJECT-TYPE    
  MscLpJT2OperEntry  

mscLpJT2LosAlarm 1.3.6.1.4.1.562.36.2.1.12.16.15.1.1
This attribute displays whether a LOS (Loss of Signal) alarm state is entered. An LOS alarm state is entered when LOS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOS defect is declared at the JT2 line interface when the input data is zero for 20 - 32 clock cycles. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. An LOS failure alarm is cleared when the LOS defect is absent for a period of 10 seconds +/- 0.5 seconds. The JT2 port goes into an operationalState of disabled for the duration of the LOS alarm condition. While the port is in the LOS alarm state, the port also transmits the far-end RAI defect indicator on the out-going JT2 line.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpJT2LofAlarm 1.3.6.1.4.1.562.36.2.1.12.16.15.1.2
This attribute indicates whether a LOF (Loss of Frame) alarm state is entered. A LOF alarm state is entered when LOF defects are observed and accumulated for 2.5 seconds +/- 0.5 seconds or more. A LOF defect occurs when seven or more consecutive incorrect frame alignment patterns (4 multiframes) are received. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The LOF alarm is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds. The port goes into an operationalState of disabled for the duration of the LOF alarm condition. While the port is in the LOF alarm state, the node also transmits the far-end RAI defect indicator on the out-going JT2 line.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpJT2RxAisPhysicalAlarm 1.3.6.1.4.1.562.36.2.1.12.16.15.1.3
This attribute indicates whether a Physical AIS alarm state is entered. A Physical AIS alarm state is entered when a Physical AIS defect is observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. A Physical AIS defect is declared when the incoming signal has two or less zeros in a sequence of 3,156 bits (0.5 ms). If the physical AIS defects are intermittently occurring, the physical AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. A Physical AIS alarm is cleared when the Physical AIS defect is absent for a period of 10 seconds +/- 0.5 seconds. The port goes into an operationalState of disabled until the AIS alarm condition is cleared. While the port is in the Physical AIS alarm state, the node also transmits the far-end RAI defect indicator on the out-going JT2 line.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpJT2RxAisPayloadAlarm 1.3.6.1.4.1.562.36.2.1.12.16.15.1.4
This attribute indicates whether a Payload AIS alarm state is entered. A Payload AIS alarm state is entered when a Payload AIS defect persists for a period of 2.5 seconds +/- 0.5 seconds. A Payload AIS defect is declared when the incoming signal of the 6312 kbit/s frame payload (TS1 - TS96) has two or less zeros in a sequence of 3,072 bits (0.5 ms). If the payload AIS defects are intermittently occurring, the payload AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. A Payload AIS failure alarm is cleared when the Payload AIS defect is absent for a period of 10 seconds +/- 0.5 seconds. The port goes into an operationalState of disabled until the AIS alarm condition is cleared. While the port is in the Payload AIS alarm state, the node also transmits the far-end RAI defect indicator on the out-going JT2 line.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpJT2RxRaiAlarm 1.3.6.1.4.1.562.36.2.1.12.16.15.1.5
This attribute indicates whether a Received RAI alarm state is entered. A received RAI alarm state is entered when the RAI signal is detected on the incoming JT2 Line (when 16 or more consecutive RAI patterns of 1111111100000000 are received on the 4 kbit/s data channel (m-bits) within the framing bits of the JT2 frame). The JT2 port goes into an operationalState of Disabled until the RAI alarm condition is cleared. The RAI alarm is cleared when four or more consecutive non-RAI patterns (anything other than 1111111100000000) are received.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpJT2TxAisPhysicalAlarm 1.3.6.1.4.1.562.36.2.1.12.16.15.1.6
This attribute indicates whether an AIS (Alarm Indication Signal) alarm is being transmitted on the outgoing JT2 line. Currently the JT2 port only transmits a Physical AIS (no Payload AIS) on the outgoing JT2 line. Since there is no Idle signal defined for JT2, the AIS signal is transmitted when the JT2 port is in the operationalState of locked. The AIS signal may also be transmitted for diagnostic testing.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpJT2TxRaiAlarm 1.3.6.1.4.1.562.36.2.1.12.16.15.1.7
This attribute indicates whether an RAI defect indication pattern is being sent on the out-going JT2 line. The RAI alarm pattern is transmitted in the 4 kbit/s data channel (m-bits) when the port detects a LOS, AIS or LOF alarm condition.
OBJECT-TYPE    
  INTEGER on(0), off(1)  

mscLpJT2StatsTable 1.3.6.1.4.1.562.36.2.1.12.16.16
This group contains the statistical data for a JT2 component in a digital hierarchy interface.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpJT2StatsEntry

mscLpJT2StatsEntry 1.3.6.1.4.1.562.36.2.1.12.16.16.1
An entry in the mscLpJT2StatsTable.
OBJECT-TYPE    
  MscLpJT2StatsEntry  

mscLpJT2RunningTime 1.3.6.1.4.1.562.36.2.1.12.16.16.1.1
This attribute indicates the number of seconds since the JT2 component was activated and placed in an unlocked state or used for operational testing. All the other error counts that follow as well as each JT2 subcomponent's error counts can be updated when this count is active.
OBJECT-TYPE    
  Counter32  

mscLpJT2ErrorFreeSec 1.3.6.1.4.1.562.36.2.1.12.16.16.1.2
This attribute indicates the number of seconds that the JT2 port has been in an error free state.
OBJECT-TYPE    
  Counter32  

mscLpJT2ErroredSec 1.3.6.1.4.1.562.36.2.1.12.16.16.1.3
This attribute indicates the total number of errored seconds for the JT2 port. An errored second is declared when a second with one or more Code Violation Error events, or one or more LOF or LOS defects occur. A code violation error may be a cyclic redundancy check (CRC) error or a bipolar violation (BPV) error.
OBJECT-TYPE    
  Counter32  

mscLpJT2SevErroredSec 1.3.6.1.4.1.562.36.2.1.12.16.16.1.4
This attribute indicates the total number of severely errored seconds for the JT2 port. A severely errored second occurs when a second with 255 or more Code Violation Error events or one or more LOF or LOS defects occur.
OBJECT-TYPE    
  Counter32  

mscLpJT2SevErroredFrmSec 1.3.6.1.4.1.562.36.2.1.12.16.16.1.5
This attribute indicates the total number of severely errored framing seconds for the JT2 port. A severely errored framing second occurs when a second with one or more Framing Errors occur.
OBJECT-TYPE    
  Counter32  

mscLpJT2UnavailSec 1.3.6.1.4.1.562.36.2.1.12.16.16.1.6
This attribute indicates the total number of seconds that the interface has been in an unavailable state. An unavailable state occurs at the onset of 10 consecutive Severely Errored Seconds. When the unavailable state is entered, the 10 Severely Errored Seconds are immediately transfered to the count of unavailableSeconds by incrementing the count of unavailSec by 10 and decrementing the count of sevErroredSec by 10. Whilst in the unavailable state, an unavailableSecond is counted for each SES or SEFS that occurs, and the count of SES and SEFS are both inhibited. The unavailable state is cleared at the onset of 10 consecutive seconds which are not Severely Errored Seconds.
OBJECT-TYPE    
  Counter32  

mscLpJT2BpvErrors 1.3.6.1.4.1.562.36.2.1.12.16.16.1.7
This attribute indicates the total count of bipolar violations (BPV). A bipolar violation is an error in the alternate mark inversion pattern (AMI) on the line. The value of this attribute will wrap to zero when it reaches its maximum value.
OBJECT-TYPE    
  Counter32  

mscLpJT2CrcErrors 1.3.6.1.4.1.562.36.2.1.12.16.16.1.8
This attribute indicates the total number of cyclic redundancy check (CRC-5) errors detected on the incoming JT2 line. The value of this attribute will wrap to 0 when its maximum value is reached.
OBJECT-TYPE    
  Counter32  

mscLpJT2FrameErrors 1.3.6.1.4.1.562.36.2.1.12.16.16.1.9
This attribute indicates the total number of Framing Errors that have occured on the JT2 port. A Framing Error is an error in the framing bits. The value of this attribute will wrap to 0 when its maximum value is reached.
OBJECT-TYPE    
  Counter32  

mscLpJT2LosStateChanges 1.3.6.1.4.1.562.36.2.1.12.16.16.1.10
This attribute indicates the total number of times that the incoming signal on the JT2 line has been lost. The value of this attribute will wrap to 0 when its maximum value is reached.
OBJECT-TYPE    
  Counter32  

mscLpJT2AdminInfoTable 1.3.6.1.4.1.562.36.2.1.12.16.17
This group contains the attributes pertaining to the vendor of the equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpJT2AdminInfoEntry

mscLpJT2AdminInfoEntry 1.3.6.1.4.1.562.36.2.1.12.16.17.1
An entry in the mscLpJT2AdminInfoTable.
OBJECT-TYPE    
  MscLpJT2AdminInfoEntry  

mscLpJT2Vendor 1.3.6.1.4.1.562.36.2.1.12.16.17.1.1
This is the name of the vendor supplying the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..20)  

mscLpJT2CommentText 1.3.6.1.4.1.562.36.2.1.12.16.17.1.2
Any miscellaneous text about the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..60)  

mscLpHssi 1.3.6.1.4.1.562.36.2.1.12.17
OBJECT IDENTIFIER    

mscLpHssiRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.17.1
This entry controls the addition and deletion of mscLpHssi components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpHssiRowStatusEntry

mscLpHssiRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.17.1.1
A single entry in the table represents a single mscLpHssi component.
OBJECT-TYPE    
  MscLpHssiRowStatusEntry  

mscLpHssiRowStatus 1.3.6.1.4.1.562.36.2.1.12.17.1.1.1
This variable is used as the basis for SNMP naming of mscLpHssi components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscLpHssiComponentName 1.3.6.1.4.1.562.36.2.1.12.17.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpHssiStorageType 1.3.6.1.4.1.562.36.2.1.12.17.1.1.4
This variable represents the storage type value for the mscLpHssi tables.
OBJECT-TYPE    
  StorageType  

mscLpHssiIndex 1.3.6.1.4.1.562.36.2.1.12.17.1.1.10
This variable represents the index for the mscLpHssi tables.
OBJECT-TYPE    
  Integer32 0..0  

mscLpHssiTest 1.3.6.1.4.1.562.36.2.1.12.17.2
OBJECT IDENTIFIER    

mscLpHssiTestRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.17.2.1
This entry controls the addition and deletion of mscLpHssiTest components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpHssiTestRowStatusEntry

mscLpHssiTestRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.17.2.1.1
A single entry in the table represents a single mscLpHssiTest component.
OBJECT-TYPE    
  MscLpHssiTestRowStatusEntry  

mscLpHssiTestRowStatus 1.3.6.1.4.1.562.36.2.1.12.17.2.1.1.1
This variable is used as the basis for SNMP naming of mscLpHssiTest components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscLpHssiTestComponentName 1.3.6.1.4.1.562.36.2.1.12.17.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpHssiTestStorageType 1.3.6.1.4.1.562.36.2.1.12.17.2.1.1.4
This variable represents the storage type value for the mscLpHssiTest tables.
OBJECT-TYPE    
  StorageType  

mscLpHssiTestIndex 1.3.6.1.4.1.562.36.2.1.12.17.2.1.1.10
This variable represents the index for the mscLpHssiTest tables.
OBJECT-TYPE    
  NonReplicated  

mscLpHssiTestStateTable 1.3.6.1.4.1.562.36.2.1.12.17.2.10
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpHssiTestStateEntry

mscLpHssiTestStateEntry 1.3.6.1.4.1.562.36.2.1.12.17.2.10.1
An entry in the mscLpHssiTestStateTable.
OBJECT-TYPE    
  MscLpHssiTestStateEntry  

mscLpHssiTestAdminState 1.3.6.1.4.1.562.36.2.1.12.17.2.10.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscLpHssiTestOperationalState 1.3.6.1.4.1.562.36.2.1.12.17.2.10.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpHssiTestUsageState 1.3.6.1.4.1.562.36.2.1.12.17.2.10.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscLpHssiTestSetupTable 1.3.6.1.4.1.562.36.2.1.12.17.2.11
This group contains all of the operational data for a Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpHssiTestSetupEntry

mscLpHssiTestSetupEntry 1.3.6.1.4.1.562.36.2.1.12.17.2.11.1
An entry in the mscLpHssiTestSetupTable.
OBJECT-TYPE    
  MscLpHssiTestSetupEntry  

mscLpHssiTestPurpose 1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.1
This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
OBJECT-TYPE    
  AsciiString SIZE(0..40)  

mscLpHssiTestType 1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.2
This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
OBJECT-TYPE    
  INTEGER card(0), manual(1), localLoop(2), remoteLoop(3), externalLoop(4), payloadLoop(5), remoteLoopThisTrib(6), v54RemoteLoop(7), pn127RemoteLoop(8)  

mscLpHssiTestFrmSize 1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.3
This attribute defines the size of the test data frames in number of bytes.
OBJECT-TYPE    
  Unsigned32 4..4096  

mscLpHssiTestFrmPatternType 1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.4
This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
OBJECT-TYPE    
  INTEGER ccitt32kBitPattern(0), ccitt8MBitPattern(1), customizedPattern(2)  

mscLpHssiTestCustomizedPattern 1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.5
This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
OBJECT-TYPE    
  Hex 0..4294967295  

mscLpHssiTestDataStartDelay 1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.6
This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
OBJECT-TYPE    
  Unsigned32 0..1814400  

mscLpHssiTestDisplayInterval 1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.7
This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
OBJECT-TYPE    
  Unsigned32 0..30240  

mscLpHssiTestDuration 1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.8
This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
OBJECT-TYPE    
  Unsigned32 1..30240  

mscLpHssiTestResultsTable 1.3.6.1.4.1.562.36.2.1.12.17.2.12
This group contains all the statistics related attributes of the Test component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpHssiTestResultsEntry

mscLpHssiTestResultsEntry 1.3.6.1.4.1.562.36.2.1.12.17.2.12.1
An entry in the mscLpHssiTestResultsTable.
OBJECT-TYPE    
  MscLpHssiTestResultsEntry  

mscLpHssiTestElapsedTime 1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.1
This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
OBJECT-TYPE    
  Counter32  

mscLpHssiTestTimeRemaining 1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.2
This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscLpHssiTestCauseOfTermination 1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.3
This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
OBJECT-TYPE    
  INTEGER testTimeExpired(0), stoppedByOperator(1), unknown(2), neverStarted(3), testRunning(4), hardwareReconfigured(5), loopCodeSyncFailed(6), patternSyncFailed(7), patternSyncLost(8)  

mscLpHssiTestBitsTx 1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.4
This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpHssiTestBytesTx 1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.5
This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpHssiTestFrmTx 1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.6
This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpHssiTestBitsRx 1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.7
This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpHssiTestBytesRx 1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.8
This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpHssiTestFrmRx 1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.9
This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpHssiTestErroredFrmRx 1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.10
This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
OBJECT-TYPE    
  PassportCounter64  

mscLpHssiTestBitErrorRate 1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.11
This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
OBJECT-TYPE    
  AsciiString SIZE(5)  

mscLpHssiProvTable 1.3.6.1.4.1.562.36.2.1.12.17.10
This group contains the specific provisioning data for a Hssi component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpHssiProvEntry

mscLpHssiProvEntry 1.3.6.1.4.1.562.36.2.1.12.17.10.1
An entry in the mscLpHssiProvTable.
OBJECT-TYPE    
  MscLpHssiProvEntry  

mscLpHssiLinkMode 1.3.6.1.4.1.562.36.2.1.12.17.10.1.1
This attribute defines the intended gender of the HSSI port. The actual gender of the port is determined by the hardware setup. In dte mode, the ta line signal is driven as specified by the attribute readyLineState when the HSSI port passes its diagnostics. The ta line signal is then driven as specified by the attribute dataTransferLineState when the application is ready to transfer data. On the other hand, the input line signal ca is compared against those specified in the attributes readyLineState and dataTransferLineState. The application will be notified when the specified input line states are observed. In dce mode, the Hssi component behaves similarly as when it is in dte mode. However, it will be driving the dce line signal (ca) and monitoring the dte line signal (ta) as specified by the attributes readyLineState and dataTransferLineState.
OBJECT-TYPE    
  INTEGER dte(0), dce(128)  

mscLpHssiReadyLineState 1.3.6.1.4.1.562.36.2.1.12.17.10.1.2
This attribute specifies the line signal originating from the HSSI interface that will always be turned on, provided the HSSI interface passes it diagnostics. This set of signal is generally required for maintaining the connection. Note that both dte and dce signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the operational attribute actualLinkMode. See also linkMode. Description of bits: ca(0) ta(1)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpHssiDataTransferLineState 1.3.6.1.4.1.562.36.2.1.12.17.10.1.3
This attribute specifies the line signals required to indicate that the external equipment is in a good state (that is, data transfer can proceed). Note that both dte and dce signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the operational attribute actualLinkMode. The value of this attribute must be a superset of that of the readyLineState attribute. See also linkMode. Description of bits: ca(0) ta(1)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpHssiLineSpeed 1.3.6.1.4.1.562.36.2.1.12.17.10.1.5
This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a clock. Note that the actual clock rate are available in the operational attributes actualTxLineSpeed and actualRxLineSpeed.
OBJECT-TYPE    
  Unsigned32 1000000..50000000  

mscLpHssiApplicationFramerName 1.3.6.1.4.1.562.36.2.1.12.17.10.1.7
This attribute contains the component name of a Framer which is associated with the Hssi component.
OBJECT-TYPE    
  Link  

mscLpHssiCidDataTable 1.3.6.1.4.1.562.36.2.1.12.17.11
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpHssiCidDataEntry

mscLpHssiCidDataEntry 1.3.6.1.4.1.562.36.2.1.12.17.11.1
An entry in the mscLpHssiCidDataTable.
OBJECT-TYPE    
  MscLpHssiCidDataEntry  

mscLpHssiCustomerIdentifier 1.3.6.1.4.1.562.36.2.1.12.17.11.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

mscLpHssiAdminInfoTable 1.3.6.1.4.1.562.36.2.1.12.17.12
This group contains the attributes pertaining to the vendor of the equipment.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpHssiAdminInfoEntry

mscLpHssiAdminInfoEntry 1.3.6.1.4.1.562.36.2.1.12.17.12.1
An entry in the mscLpHssiAdminInfoTable.
OBJECT-TYPE    
  MscLpHssiAdminInfoEntry  

mscLpHssiVendor 1.3.6.1.4.1.562.36.2.1.12.17.12.1.1
This is the name of the vendor supplying the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..20)  

mscLpHssiCommentText 1.3.6.1.4.1.562.36.2.1.12.17.12.1.2
Any miscellaneous text about the facility.
OBJECT-TYPE    
  AsciiString SIZE(0..60)  

mscLpHssiIfEntryTable 1.3.6.1.4.1.562.36.2.1.12.17.13
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpHssiIfEntryEntry

mscLpHssiIfEntryEntry 1.3.6.1.4.1.562.36.2.1.12.17.13.1
An entry in the mscLpHssiIfEntryTable.
OBJECT-TYPE    
  MscLpHssiIfEntryEntry  

mscLpHssiIfAdminStatus 1.3.6.1.4.1.562.36.2.1.12.17.13.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpHssiIfIndex 1.3.6.1.4.1.562.36.2.1.12.17.13.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscLpHssiOperStatusTable 1.3.6.1.4.1.562.36.2.1.12.17.14
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpHssiOperStatusEntry

mscLpHssiOperStatusEntry 1.3.6.1.4.1.562.36.2.1.12.17.14.1
An entry in the mscLpHssiOperStatusTable.
OBJECT-TYPE    
  MscLpHssiOperStatusEntry  

mscLpHssiSnmpOperStatus 1.3.6.1.4.1.562.36.2.1.12.17.14.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscLpHssiStateTable 1.3.6.1.4.1.562.36.2.1.12.17.15
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpHssiStateEntry

mscLpHssiStateEntry 1.3.6.1.4.1.562.36.2.1.12.17.15.1
An entry in the mscLpHssiStateTable.
OBJECT-TYPE    
  MscLpHssiStateEntry  

mscLpHssiAdminState 1.3.6.1.4.1.562.36.2.1.12.17.15.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscLpHssiOperationalState 1.3.6.1.4.1.562.36.2.1.12.17.15.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpHssiUsageState 1.3.6.1.4.1.562.36.2.1.12.17.15.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscLpHssiAvailabilityStatus 1.3.6.1.4.1.562.36.2.1.12.17.15.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

mscLpHssiProceduralStatus 1.3.6.1.4.1.562.36.2.1.12.17.15.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpHssiControlStatus 1.3.6.1.4.1.562.36.2.1.12.17.15.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpHssiAlarmStatus 1.3.6.1.4.1.562.36.2.1.12.17.15.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpHssiStandbyStatus 1.3.6.1.4.1.562.36.2.1.12.17.15.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

mscLpHssiUnknownStatus 1.3.6.1.4.1.562.36.2.1.12.17.15.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

mscLpHssiOperTable 1.3.6.1.4.1.562.36.2.1.12.17.16
This group contains all specific operational data for a Hssi component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpHssiOperEntry

mscLpHssiOperEntry 1.3.6.1.4.1.562.36.2.1.12.17.16.1
An entry in the mscLpHssiOperTable.
OBJECT-TYPE    
  MscLpHssiOperEntry  

mscLpHssiActualLinkMode 1.3.6.1.4.1.562.36.2.1.12.17.16.1.1
This attribute contains the actual link mode defined by the hardware. Note that the hardware overrides the provisionable data. The port behaves as a dce or dte according to the actualLinkMode.
OBJECT-TYPE    
  INTEGER dte(0), dce(128)  

mscLpHssiLineState 1.3.6.1.4.1.562.36.2.1.12.17.16.1.2
This attribute contains the state of the interface signals. Description of bits: ca(0) ta(1) tm(2) la(3) lb(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpHssiActualTxLineSpeed 1.3.6.1.4.1.562.36.2.1.12.17.16.1.3
This attribute is the measured speed of the transmit clock. Note the reported transmit speed is in an error of +/- 10000 bit/s
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscLpHssiActualRxLineSpeed 1.3.6.1.4.1.562.36.2.1.12.17.16.1.4
This attribute is the measured speed of the receive clock. Note the reported receive speed is in an error of +/- 10000 bit/s
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscLpHssiDataXferStateChanges 1.3.6.1.4.1.562.36.2.1.12.17.16.1.5
This attribute contains the number of times that the line has entered or exited the data transfer state.
OBJECT-TYPE    
  Counter32  

mscLpEng 1.3.6.1.4.1.562.36.2.1.12.23
OBJECT IDENTIFIER    

mscLpEngRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.23.1
This entry controls the addition and deletion of mscLpEng components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpEngRowStatusEntry

mscLpEngRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.23.1.1
A single entry in the table represents a single mscLpEng component.
OBJECT-TYPE    
  MscLpEngRowStatusEntry  

mscLpEngRowStatus 1.3.6.1.4.1.562.36.2.1.12.23.1.1.1
This variable is used as the basis for SNMP naming of mscLpEng components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscLpEngComponentName 1.3.6.1.4.1.562.36.2.1.12.23.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpEngStorageType 1.3.6.1.4.1.562.36.2.1.12.23.1.1.4
This variable represents the storage type value for the mscLpEng tables.
OBJECT-TYPE    
  StorageType  

mscLpEngIndex 1.3.6.1.4.1.562.36.2.1.12.23.1.1.10
This variable represents the index for the mscLpEng tables.
OBJECT-TYPE    
  NonReplicated  

mscLpEngDs 1.3.6.1.4.1.562.36.2.1.12.23.2
OBJECT IDENTIFIER    

mscLpEngDsRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.23.2.1
This entry controls the addition and deletion of mscLpEngDs components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpEngDsRowStatusEntry

mscLpEngDsRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.23.2.1.1
A single entry in the table represents a single mscLpEngDs component.
OBJECT-TYPE    
  MscLpEngDsRowStatusEntry  

mscLpEngDsRowStatus 1.3.6.1.4.1.562.36.2.1.12.23.2.1.1.1
This variable is used as the basis for SNMP naming of mscLpEngDs components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscLpEngDsComponentName 1.3.6.1.4.1.562.36.2.1.12.23.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpEngDsStorageType 1.3.6.1.4.1.562.36.2.1.12.23.2.1.1.4
This variable represents the storage type value for the mscLpEngDs tables.
OBJECT-TYPE    
  StorageType  

mscLpEngDsIndex 1.3.6.1.4.1.562.36.2.1.12.23.2.1.1.10
This variable represents the index for the mscLpEngDs tables.
OBJECT-TYPE    
  INTEGER accounting(0), alarm(1), log(2), debug(3), scn(4), trap(5), stats(6)  

mscLpEngDsOv 1.3.6.1.4.1.562.36.2.1.12.23.2.2
OBJECT IDENTIFIER    

mscLpEngDsOvRowStatusTable 1.3.6.1.4.1.562.36.2.1.12.23.2.2.1
This entry controls the addition and deletion of mscLpEngDsOv components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpEngDsOvRowStatusEntry

mscLpEngDsOvRowStatusEntry 1.3.6.1.4.1.562.36.2.1.12.23.2.2.1.1
A single entry in the table represents a single mscLpEngDsOv component.
OBJECT-TYPE    
  MscLpEngDsOvRowStatusEntry  

mscLpEngDsOvRowStatus 1.3.6.1.4.1.562.36.2.1.12.23.2.2.1.1.1
This variable is used as the basis for SNMP naming of mscLpEngDsOv components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscLpEngDsOvComponentName 1.3.6.1.4.1.562.36.2.1.12.23.2.2.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscLpEngDsOvStorageType 1.3.6.1.4.1.562.36.2.1.12.23.2.2.1.1.4
This variable represents the storage type value for the mscLpEngDsOv tables.
OBJECT-TYPE    
  StorageType  

mscLpEngDsOvIndex 1.3.6.1.4.1.562.36.2.1.12.23.2.2.1.1.10
This variable represents the index for the mscLpEngDsOv tables.
OBJECT-TYPE    
  NonReplicated  

mscLpEngDsOvProvTable 1.3.6.1.4.1.562.36.2.1.12.23.2.2.10
This group contains provisionable attributes for the DataStream Ov components under Lp Engineering. DESCRIPTION
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpEngDsOvProvEntry

mscLpEngDsOvProvEntry 1.3.6.1.4.1.562.36.2.1.12.23.2.2.10.1
An entry in the mscLpEngDsOvProvTable.
OBJECT-TYPE    
  MscLpEngDsOvProvEntry  

mscLpEngDsOvAgentQueueSize 1.3.6.1.4.1.562.36.2.1.12.23.2.2.10.1.1
This attribute specifies the maximum size of the DCS Agent's queue for this data stream on this LP. For more details on the defaults and other information, refer to the parent component's agentQueueSize attribute. The size should be set to 0 if absolutely no data is to be accepted from applications. There are threshold alarms based on the value of the Agent's currentQueueSize attribute (a Set when the queue becomes 75% full and a Clear after dropping back to 50% full). To properly determine what to set this to, consult the 'Magellan Passport Engineering Notes and Guidelines'.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscLpEngDsOperTable 1.3.6.1.4.1.562.36.2.1.12.23.2.10
This group contains operational attributes for the DataStream components under Lp Engineering.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpEngDsOperEntry

mscLpEngDsOperEntry 1.3.6.1.4.1.562.36.2.1.12.23.2.10.1
An entry in the mscLpEngDsOperTable.
OBJECT-TYPE    
  MscLpEngDsOperEntry  

mscLpEngDsAgentQueueSize 1.3.6.1.4.1.562.36.2.1.12.23.2.10.1.1
This attribute indicates the maximum size of the DCS Agent queue size maximum for a DCS data stream on the LP. It is the maximum size to which the Agent's currentQueueSize can grow. When the queue is full and more data is offered to the Agent, it will be discarded. The following are the system defaults (in number of records): - alarm: 100 - accounting: 10000 - debug: 0 - log: 50 - scn: 200 - trap: 50 - stats: 0 To override the system defaults, see Lp Eng Ds Ov's agentQueueSize attribute.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

mscLpProvTable 1.3.6.1.4.1.562.36.2.1.12.100
This Group contains the provisionable attributes for the LP component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpProvEntry

mscLpProvEntry 1.3.6.1.4.1.562.36.2.1.12.100.1
An entry in the mscLpProvTable.
OBJECT-TYPE    
  MscLpProvEntry  

mscLpMainCard 1.3.6.1.4.1.562.36.2.1.12.100.1.1
This is the preferred processor card on which this LP should be assigned.
OBJECT-TYPE    
  Link  

mscLpSpareCard 1.3.6.1.4.1.562.36.2.1.12.100.1.2
This is the spare processor card on which this LP should be assigned.
OBJECT-TYPE    
  Link  

mscLpLogicalProcessorType 1.3.6.1.4.1.562.36.2.1.12.100.1.3
This is the Logical Processor Type (LPT) that determines which software this LP will run.
OBJECT-TYPE    
  Link  

mscLpCidDataTable 1.3.6.1.4.1.562.36.2.1.12.101
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpCidDataEntry

mscLpCidDataEntry 1.3.6.1.4.1.562.36.2.1.12.101.1
An entry in the mscLpCidDataTable.
OBJECT-TYPE    
  MscLpCidDataEntry  

mscLpCustomerIdentifier 1.3.6.1.4.1.562.36.2.1.12.101.1.1
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OBJECT-TYPE    
  Unsigned32 0 | 1..8191  

mscLpStateTable 1.3.6.1.4.1.562.36.2.1.12.102
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpStateEntry

mscLpStateEntry 1.3.6.1.4.1.562.36.2.1.12.102.1
An entry in the mscLpStateTable.
OBJECT-TYPE    
  MscLpStateEntry  

mscLpAdminState 1.3.6.1.4.1.562.36.2.1.12.102.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscLpOperationalState 1.3.6.1.4.1.562.36.2.1.12.102.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscLpUsageState 1.3.6.1.4.1.562.36.2.1.12.102.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscLpAvailabilityStatus 1.3.6.1.4.1.562.36.2.1.12.102.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

mscLpProceduralStatus 1.3.6.1.4.1.562.36.2.1.12.102.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpControlStatus 1.3.6.1.4.1.562.36.2.1.12.102.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpAlarmStatus 1.3.6.1.4.1.562.36.2.1.12.102.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscLpStandbyStatus 1.3.6.1.4.1.562.36.2.1.12.102.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

mscLpUnknownStatus 1.3.6.1.4.1.562.36.2.1.12.102.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

mscLpOperTable 1.3.6.1.4.1.562.36.2.1.12.103
This Group contains the operational attributes for the LP component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpOperEntry

mscLpOperEntry 1.3.6.1.4.1.562.36.2.1.12.103.1
An entry in the mscLpOperTable.
OBJECT-TYPE    
  MscLpOperEntry  

mscLpActiveCard 1.3.6.1.4.1.562.36.2.1.12.103.1.1
This attribute indicates on which card this LP is currently running (if any).
OBJECT-TYPE    
  RowPointer  

mscLpMainCardStatus 1.3.6.1.4.1.562.36.2.1.12.103.1.2
This attribute specifies the status of this LP's main card. The following values have been defined: notProvisioned No main card has been provisioned. notAvailable The main card is not available. available The main card is available (running as standby). active The main card is running as active.
OBJECT-TYPE    
  INTEGER notProvisioned(0), notAvailable(1), available(3), active(4)  

mscLpSpareCardStatus 1.3.6.1.4.1.562.36.2.1.12.103.1.3
This attribute specifies the status of this LP's spare card. The following values have been defined: notProvisioned No spare card has been provisioned. notAvailable The spare card is not available. alreadyInUse The spare card is already in use by another LP. available The spare card is available (running as standby). active The spare card is running as active.
OBJECT-TYPE    
  INTEGER notProvisioned(0), notAvailable(1), alreadyInUse(2), available(3), active(4)  

mscLpRestartOnCpSwitch 1.3.6.1.4.1.562.36.2.1.12.103.1.4
This attribute indicates whether the Lp always restarts upon a CP switchover. The value is true if the featureList of the associated Sw Lpt component contains a feature that does not support hitless CP switchover. The value is also true when the feature noHitlessCpSwitch is provisioned on the CP. A value of false does not guarantee 'no restart'; dynamic conditions may still result in an FP restart when a CP switchover occurs.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

mscLpScheduledSwitchover 1.3.6.1.4.1.562.36.2.1.12.103.1.5
This attribute indicates the execution time of the scheduled switchover. When there is no switchover scheduled the time is equals to 0 (0000-00-00 00:00).
OBJECT-TYPE    
  EnterpriseDateAndTime SIZE(0 | 16)  

mscLpUtilTable 1.3.6.1.4.1.562.36.2.1.12.104
This group contains the operational attributes that specify the processor's utilization levels. When this group exists for an LP component, the attributes are representative of the active card.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpUtilEntry

mscLpUtilEntry 1.3.6.1.4.1.562.36.2.1.12.104.1
An entry in the mscLpUtilTable.
OBJECT-TYPE    
  MscLpUtilEntry  

mscLpTimeInterval 1.3.6.1.4.1.562.36.2.1.12.104.1.1
This attribute indicates the time period (in minutes) for which the average, minimum and maximum utilization values are calculated. This attribute is reset to 0 every 15 minutes.
OBJECT-TYPE    
  Unsigned32 0..15  

mscLpCpuUtil 1.3.6.1.4.1.562.36.2.1.12.104.1.2
This attribute indicates an approximation of the current processor utilization level (expressed as a percentage).
OBJECT-TYPE    
  Gauge32 0..100  

mscLpCpuUtilAvg 1.3.6.1.4.1.562.36.2.1.12.104.1.3
This attribute indicates an average processor utilization level over the specified time period, timeInterval. This average is calculated based on one minute CPU utilization averages.
OBJECT-TYPE    
  Gauge32 0..100  

mscLpCpuUtilAvgMin 1.3.6.1.4.1.562.36.2.1.12.104.1.4
This attribute indicates the minimum processor utilization level over a specified time period, timeInterval. This is based on one minute CPU utilization averages.
OBJECT-TYPE    
  Gauge32 0..100  

mscLpCpuUtilAvgMax 1.3.6.1.4.1.562.36.2.1.12.104.1.5
This attribute indicates the maximum processor utilization level over a specified time period, timeInterval. This is based on one minute CPU utilization averages.
OBJECT-TYPE    
  Gauge32 0..100  

mscLpMsgBlockUsage 1.3.6.1.4.1.562.36.2.1.12.104.1.6
This attribute indicates the processor's current shared message block memory utilization. If there is no shared memory on the card, this attribute indicates 0.
OBJECT-TYPE    
  Gauge32 0..2147483647  

mscLpMsgBlockUsageAvg 1.3.6.1.4.1.562.36.2.1.12.104.1.7
This attribute indicates the processor's average memory utilization of shared message blocks, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this average memory utilization is reset to the current usage, sharedMsgBlockUsage. If there is no shared memory on the card, this attribute indicates 0.
OBJECT-TYPE    
  Gauge32 0..2147483647  

mscLpMsgBlockUsageAvgMin 1.3.6.1.4.1.562.36.2.1.12.104.1.8
This attribute indicates the processor's minimum memory utilization of shared message blocks, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this minimum memory utilization is reset to the current usage, sharedMsgBlockUsage. If there is no shared memory on the card, this attribute indicates 0.
OBJECT-TYPE    
  Gauge32 0..2147483647  

mscLpMsgBlockUsageAvgMax 1.3.6.1.4.1.562.36.2.1.12.104.1.9
This attribute indicates the processor's maximum memory utilization of shared message blocks, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this maximum memory utilization is reset to the current usage, sharedMsgBlockUsage. If there is no shared memory on the card, this attribute indicates 0.
OBJECT-TYPE    
  Gauge32 0..2147483647  

mscLpLocalMsgBlockUsage 1.3.6.1.4.1.562.36.2.1.12.104.1.10
This attribute indicates the processor's current memory utilization of message blocks which are used for local messaging on the card.
OBJECT-TYPE    
  Gauge32 0..2147483647  

mscLpLocalMsgBlockUsageAvg 1.3.6.1.4.1.562.36.2.1.12.104.1.11
This attribute indicates the processor's average memory utilization of message blocks used for local messaging on the card, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this average memory utilization is reset to the current usage, localMsgBlockUsage.
OBJECT-TYPE    
  Gauge32 0..2147483647  

mscLpLocalMsgBlockUsageMin 1.3.6.1.4.1.562.36.2.1.12.104.1.12
This attribute indicates the processor's minimum memory utilization of message blocks used for local messaging on the card, calculated over a specified time period, timeInterval. This utilization value is updated at 15 second intervals. At the start of each timeInterval, this minimum memory utilization is reset to the current usage, localMsgBlockUsage.
OBJECT-TYPE    
  Gauge32 0..2147483647  

mscLpLocalMsgBlockUsageMax 1.3.6.1.4.1.562.36.2.1.12.104.1.13
This attribute indicates the processor's maximum memory utilization of message blocks used for local messaging on the card, calculated over a specified time period, timeInterval. This utilization value is updated at 15 second intervals. At the start of each timeInterval, this maximum memory utilization is reset to the current usage, localMsgBlockUsage.
OBJECT-TYPE    
  Gauge32 0..2147483647  

mscLpCapTable 1.3.6.1.4.1.562.36.2.1.12.105
This group contains the operational attributes that specify the processor's capacity levels. When this group exists for an LP component, the attributes are representative of the active Card.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpCapEntry

mscLpCapEntry 1.3.6.1.4.1.562.36.2.1.12.105.1
An entry in the mscLpCapTable.
OBJECT-TYPE    
  MscLpCapEntry  

mscLpMsgBlockCapacity 1.3.6.1.4.1.562.36.2.1.12.105.1.1
This attribute indicates the processor card's shared message block memory capacity.
OBJECT-TYPE    
  Unsigned32 0..2147483647  

mscLpLocalMsgBlockCapacity 1.3.6.1.4.1.562.36.2.1.12.105.1.2
This attribute indicates the processor card's local message block memory capacity. These message blocks are used for local messaging on the card.
OBJECT-TYPE    
  Unsigned32 0..2147483647  

mscLpLinkToApplicationsTable 1.3.6.1.4.1.562.36.2.1.12.242
This attribute allows applications to link themselves directly to the LP component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpLinkToApplicationsEntry

mscLpLinkToApplicationsEntry 1.3.6.1.4.1.562.36.2.1.12.242.1
An entry in the mscLpLinkToApplicationsTable.
OBJECT-TYPE    
  MscLpLinkToApplicationsEntry  

mscLpLinkToApplicationsValue 1.3.6.1.4.1.562.36.2.1.12.242.1.1
This variable represents both the value and the index for the mscLpLinkToApplicationsTable.
OBJECT-TYPE    
  Link  

mscLpMemoryCapacityTable 1.3.6.1.4.1.562.36.2.1.12.244
This attribute indicates the processor card's memory capacity for each type of memory.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpMemoryCapacityEntry

mscLpMemoryCapacityEntry 1.3.6.1.4.1.562.36.2.1.12.244.1
An entry in the mscLpMemoryCapacityTable.
OBJECT-TYPE    
  MscLpMemoryCapacityEntry  

mscLpMemoryCapacityIndex 1.3.6.1.4.1.562.36.2.1.12.244.1.1
This variable represents the mscLpMemoryCapacityTable specific index for the mscLpMemoryCapacityTable.
OBJECT-TYPE    
  INTEGER fastRam(0), normalRam(1), sharedRam(2)  

mscLpMemoryCapacityValue 1.3.6.1.4.1.562.36.2.1.12.244.1.2
This variable represents an individual value for the mscLpMemoryCapacityTable.
OBJECT-TYPE    
  Unsigned32 0..2147483647  

mscLpMemoryUsageTable 1.3.6.1.4.1.562.36.2.1.12.245
This attribute indicates the processor's current memory utilization for each type of memory.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpMemoryUsageEntry

mscLpMemoryUsageEntry 1.3.6.1.4.1.562.36.2.1.12.245.1
An entry in the mscLpMemoryUsageTable.
OBJECT-TYPE    
  MscLpMemoryUsageEntry  

mscLpMemoryUsageIndex 1.3.6.1.4.1.562.36.2.1.12.245.1.1
This variable represents the mscLpMemoryUsageTable specific index for the mscLpMemoryUsageTable.
OBJECT-TYPE    
  INTEGER fastRam(0), normalRam(1), sharedRam(2)  

mscLpMemoryUsageValue 1.3.6.1.4.1.562.36.2.1.12.245.1.2
This variable represents an individual value for the mscLpMemoryUsageTable.
OBJECT-TYPE    
  Gauge32 0..2147483647  

mscLpMemoryUsageAvgTable 1.3.6.1.4.1.562.36.2.1.12.276
This attribute indicates the processor's average memory utilization for each type of memory in the specified time period, timeInterval. This value is calculated using 15 second samples.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpMemoryUsageAvgEntry

mscLpMemoryUsageAvgEntry 1.3.6.1.4.1.562.36.2.1.12.276.1
An entry in the mscLpMemoryUsageAvgTable.
OBJECT-TYPE    
  MscLpMemoryUsageAvgEntry  

mscLpMemoryUsageAvgIndex 1.3.6.1.4.1.562.36.2.1.12.276.1.1
This variable represents the mscLpMemoryUsageAvgTable specific index for the mscLpMemoryUsageAvgTable.
OBJECT-TYPE    
  INTEGER fastRam(0), normalRam(1), sharedRam(2)  

mscLpMemoryUsageAvgValue 1.3.6.1.4.1.562.36.2.1.12.276.1.2
This variable represents an individual value for the mscLpMemoryUsageAvgTable.
OBJECT-TYPE    
  Gauge32 0..2147483647  

mscLpMemoryUsageAvgMinTable 1.3.6.1.4.1.562.36.2.1.12.277
This attribute indicates the processor's minimum memory utilization for each type of memory in the specified time period, timeInterval. This value is calculated using 15 second samples.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpMemoryUsageAvgMinEntry

mscLpMemoryUsageAvgMinEntry 1.3.6.1.4.1.562.36.2.1.12.277.1
An entry in the mscLpMemoryUsageAvgMinTable.
OBJECT-TYPE    
  MscLpMemoryUsageAvgMinEntry  

mscLpMemoryUsageAvgMinIndex 1.3.6.1.4.1.562.36.2.1.12.277.1.1
This variable represents the mscLpMemoryUsageAvgMinTable specific index for the mscLpMemoryUsageAvgMinTable.
OBJECT-TYPE    
  INTEGER fastRam(0), normalRam(1), sharedRam(2)  

mscLpMemoryUsageAvgMinValue 1.3.6.1.4.1.562.36.2.1.12.277.1.2
This variable represents an individual value for the mscLpMemoryUsageAvgMinTable.
OBJECT-TYPE    
  Gauge32 0..2147483647  

mscLpMemoryUsageAvgMaxTable 1.3.6.1.4.1.562.36.2.1.12.278
This attribute indicates the processor's maximum memory utilization for each type of memory in the specified time period, timeInterval. This value is calculated using 15 second samples.
OBJECT-TYPE    
  SEQUENCE OF  
    MscLpMemoryUsageAvgMaxEntry

mscLpMemoryUsageAvgMaxEntry 1.3.6.1.4.1.562.36.2.1.12.278.1
An entry in the mscLpMemoryUsageAvgMaxTable.
OBJECT-TYPE    
  MscLpMemoryUsageAvgMaxEntry  

mscLpMemoryUsageAvgMaxIndex 1.3.6.1.4.1.562.36.2.1.12.278.1.1
This variable represents the mscLpMemoryUsageAvgMaxTable specific index for the mscLpMemoryUsageAvgMaxTable.
OBJECT-TYPE    
  INTEGER fastRam(0), normalRam(1), sharedRam(2)  

mscLpMemoryUsageAvgMaxValue 1.3.6.1.4.1.562.36.2.1.12.278.1.2
This variable represents an individual value for the mscLpMemoryUsageAvgMaxTable.
OBJECT-TYPE    
  Gauge32 0..2147483647  

logicalProcessorMIB 1.3.6.1.4.1.562.36.2.2.11
OBJECT IDENTIFIER    

logicalProcessorGroup 1.3.6.1.4.1.562.36.2.2.11.1
OBJECT IDENTIFIER    

logicalProcessorGroupCA 1.3.6.1.4.1.562.36.2.2.11.1.1
OBJECT IDENTIFIER    

logicalProcessorGroupCA02 1.3.6.1.4.1.562.36.2.2.11.1.1.3
OBJECT IDENTIFIER    

logicalProcessorGroupCA02A 1.3.6.1.4.1.562.36.2.2.11.1.1.3.2
OBJECT IDENTIFIER    

logicalProcessorCapabilities 1.3.6.1.4.1.562.36.2.2.11.3
OBJECT IDENTIFIER    

logicalProcessorCapabilitiesCA 1.3.6.1.4.1.562.36.2.2.11.3.1
OBJECT IDENTIFIER    

logicalProcessorCapabilitiesCA02 1.3.6.1.4.1.562.36.2.2.11.3.1.3
OBJECT IDENTIFIER    

logicalProcessorCapabilitiesCA02A 1.3.6.1.4.1.562.36.2.2.11.3.1.3.2
OBJECT IDENTIFIER    

Defined Objects

MscLpRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpRowStatus  
  DisplayString as mscLpComponentName  
  StorageType as mscLpStorageType  
  Integer32 as mscLpIndex  

MscLpProvEntry  
SEQUENCE    
  Link as mscLpMainCard  
  Link as mscLpSpareCard  
  Link as mscLpLogicalProcessorType  

MscLpCidDataEntry  
SEQUENCE    
  Unsigned32 as mscLpCustomerIdentifier  

MscLpStateEntry  
SEQUENCE    
  INTEGER as mscLpAdminState  
  INTEGER as mscLpOperationalState  
  INTEGER as mscLpUsageState  
  OCTET STRING as mscLpAvailabilityStatus  
  OCTET STRING as mscLpProceduralStatus  
  OCTET STRING as mscLpControlStatus  
  OCTET STRING as mscLpAlarmStatus  
  INTEGER as mscLpStandbyStatus  
  INTEGER as mscLpUnknownStatus  

MscLpOperEntry  
SEQUENCE    
  RowPointer as mscLpActiveCard  
  INTEGER as mscLpMainCardStatus  
  INTEGER as mscLpSpareCardStatus  
  INTEGER as mscLpRestartOnCpSwitch  
  EnterpriseDateAndTime as mscLpScheduledSwitchover  

MscLpUtilEntry  
SEQUENCE    
  Unsigned32 as mscLpTimeInterval  
  Gauge32 as mscLpCpuUtil  
  Gauge32 as mscLpCpuUtilAvg  
  Gauge32 as mscLpCpuUtilAvgMin  
  Gauge32 as mscLpCpuUtilAvgMax  
  Gauge32 as mscLpMsgBlockUsage  
  Gauge32 as mscLpMsgBlockUsageAvg  
  Gauge32 as mscLpMsgBlockUsageAvgMin  
  Gauge32 as mscLpMsgBlockUsageAvgMax  
  Gauge32 as mscLpLocalMsgBlockUsage  
  Gauge32 as mscLpLocalMsgBlockUsageAvg  
  Gauge32 as mscLpLocalMsgBlockUsageMin  
  Gauge32 as mscLpLocalMsgBlockUsageMax  

MscLpCapEntry  
SEQUENCE    
  Unsigned32 as mscLpMsgBlockCapacity  
  Unsigned32 as mscLpLocalMsgBlockCapacity  

MscLpLinkToApplicationsEntry  
SEQUENCE    
  Link as mscLpLinkToApplicationsValue  

MscLpMemoryCapacityEntry  
SEQUENCE    
  INTEGER as mscLpMemoryCapacityIndex  
  Unsigned32 as mscLpMemoryCapacityValue  

MscLpMemoryUsageEntry  
SEQUENCE    
  INTEGER as mscLpMemoryUsageIndex  
  Gauge32 as mscLpMemoryUsageValue  

MscLpMemoryUsageAvgEntry  
SEQUENCE    
  INTEGER as mscLpMemoryUsageAvgIndex  
  Gauge32 as mscLpMemoryUsageAvgValue  

MscLpMemoryUsageAvgMinEntry  
SEQUENCE    
  INTEGER as mscLpMemoryUsageAvgMinIndex  
  Gauge32 as mscLpMemoryUsageAvgMinValue  

MscLpMemoryUsageAvgMaxEntry  
SEQUENCE    
  INTEGER as mscLpMemoryUsageAvgMaxIndex  
  Gauge32 as mscLpMemoryUsageAvgMaxValue  

MscLpDS3RowStatusEntry  
SEQUENCE    
  RowStatus as mscLpDS3RowStatus  
  DisplayString as mscLpDS3ComponentName  
  StorageType as mscLpDS3StorageType  
  Integer32 as mscLpDS3Index  

MscLpDS3ProvEntry  
SEQUENCE    
  INTEGER as mscLpDS3CbitParity  
  Unsigned32 as mscLpDS3LineLength  
  INTEGER as mscLpDS3ClockingSource  
  Link as mscLpDS3ApplicationFramerName  
  INTEGER as mscLpDS3Mapping  

MscLpDS3CidDataEntry  
SEQUENCE    
  Unsigned32 as mscLpDS3CustomerIdentifier  

MscLpDS3AdminInfoEntry  
SEQUENCE    
  AsciiString as mscLpDS3Vendor  
  AsciiString as mscLpDS3CommentText  

MscLpDS3IfEntryEntry  
SEQUENCE    
  INTEGER as mscLpDS3IfAdminStatus  
  InterfaceIndex as mscLpDS3IfIndex  

MscLpDS3OperStatusEntry  
SEQUENCE    
  INTEGER as mscLpDS3SnmpOperStatus  

MscLpDS3StateEntry  
SEQUENCE    
  INTEGER as mscLpDS3AdminState  
  INTEGER as mscLpDS3OperationalState  
  INTEGER as mscLpDS3UsageState  
  OCTET STRING as mscLpDS3AvailabilityStatus  
  OCTET STRING as mscLpDS3ProceduralStatus  
  OCTET STRING as mscLpDS3ControlStatus  
  OCTET STRING as mscLpDS3AlarmStatus  
  INTEGER as mscLpDS3StandbyStatus  
  INTEGER as mscLpDS3UnknownStatus  

MscLpDS3OperEntry  
SEQUENCE    
  INTEGER as mscLpDS3LosAlarm  
  INTEGER as mscLpDS3LofAlarm  
  INTEGER as mscLpDS3RxAisAlarm  
  INTEGER as mscLpDS3RxRaiAlarm  
  INTEGER as mscLpDS3RxIdle  
  INTEGER as mscLpDS3TxAis  
  INTEGER as mscLpDS3TxRai  
  INTEGER as mscLpDS3TxIdle  

MscLpDS3StatsEntry  
SEQUENCE    
  Counter32 as mscLpDS3RunningTime  
  Counter32 as mscLpDS3ErrorFreeSec  
  Counter32 as mscLpDS3LineCodeViolations  
  Counter32 as mscLpDS3LineErroredSec  
  Counter32 as mscLpDS3LineSevErroredSec  
  Counter32 as mscLpDS3LineLosSec  
  Counter32 as mscLpDS3LineFailures  
  Counter32 as mscLpDS3PathCodeViolations  
  Counter32 as mscLpDS3PathErroredSec  
  Counter32 as mscLpDS3PathSevErroredSec  
  Counter32 as mscLpDS3PathSefAisSec  
  Counter32 as mscLpDS3PathUnavailSec  
  Counter32 as mscLpDS3PathFailures  

MscLpDS3TestRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpDS3TestRowStatus  
  DisplayString as mscLpDS3TestComponentName  
  StorageType as mscLpDS3TestStorageType  
  NonReplicated as mscLpDS3TestIndex  

MscLpDS3TestStateEntry  
SEQUENCE    
  INTEGER as mscLpDS3TestAdminState  
  INTEGER as mscLpDS3TestOperationalState  
  INTEGER as mscLpDS3TestUsageState  

MscLpDS3TestSetupEntry  
SEQUENCE    
  AsciiString as mscLpDS3TestPurpose  
  INTEGER as mscLpDS3TestType  
  Unsigned32 as mscLpDS3TestFrmSize  
  INTEGER as mscLpDS3TestFrmPatternType  
  Hex as mscLpDS3TestCustomizedPattern  
  Unsigned32 as mscLpDS3TestDataStartDelay  
  Unsigned32 as mscLpDS3TestDisplayInterval  
  Unsigned32 as mscLpDS3TestDuration  

MscLpDS3TestResultsEntry  
SEQUENCE    
  Counter32 as mscLpDS3TestElapsedTime  
  Unsigned32 as mscLpDS3TestTimeRemaining  
  INTEGER as mscLpDS3TestCauseOfTermination  
  PassportCounter64 as mscLpDS3TestBitsTx  
  PassportCounter64 as mscLpDS3TestBytesTx  
  PassportCounter64 as mscLpDS3TestFrmTx  
  PassportCounter64 as mscLpDS3TestBitsRx  
  PassportCounter64 as mscLpDS3TestBytesRx  
  PassportCounter64 as mscLpDS3TestFrmRx  
  PassportCounter64 as mscLpDS3TestErroredFrmRx  
  AsciiString as mscLpDS3TestBitErrorRate  

MscLpDS3CBitRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpDS3CBitRowStatus  
  DisplayString as mscLpDS3CBitComponentName  
  StorageType as mscLpDS3CBitStorageType  
  NonReplicated as mscLpDS3CBitIndex  

MscLpDS3CBitOperationalEntry  
SEQUENCE    
  INTEGER as mscLpDS3CBitFarEndAlarm  
  OCTET STRING as mscLpDS3CBitLoopedbackToFarEnd  
  OCTET STRING as mscLpDS3CBitLoopbackAtFarEndRequested  

MscLpDS3CBitStatsEntry  
SEQUENCE    
  Counter32 as mscLpDS3CBitCbitErrorFreeSec  
  Counter32 as mscLpDS3CBitCbitCodeViolations  
  Counter32 as mscLpDS3CBitCbitErroredSec  
  Counter32 as mscLpDS3CBitCbitSevErroredSec  
  Counter32 as mscLpDS3CBitCbitUnavailSec  
  Counter32 as mscLpDS3CBitFarEndErrorFreeSec  
  Counter32 as mscLpDS3CBitFarEndCodeViolations  
  Counter32 as mscLpDS3CBitFarEndErroredSec  
  Counter32 as mscLpDS3CBitFarEndSevErroredSec  
  Counter32 as mscLpDS3CBitFarEndSefAisSec  
  Counter32 as mscLpDS3CBitFarEndUnavailSec  
  Counter32 as mscLpDS3CBitFarEndFailures  

MscLpDS3PlcpRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpDS3PlcpRowStatus  
  DisplayString as mscLpDS3PlcpComponentName  
  StorageType as mscLpDS3PlcpStorageType  
  NonReplicated as mscLpDS3PlcpIndex  

MscLpDS3PlcpOperationalEntry  
SEQUENCE    
  INTEGER as mscLpDS3PlcpLofAlarm  
  INTEGER as mscLpDS3PlcpRxRaiAlarm  

MscLpDS3PlcpStatsEntry  
SEQUENCE    
  Counter32 as mscLpDS3PlcpErrorFreeSec  
  Counter32 as mscLpDS3PlcpCodingViolations  
  Counter32 as mscLpDS3PlcpErroredSec  
  Counter32 as mscLpDS3PlcpSevErroredSec  
  Counter32 as mscLpDS3PlcpSevErroredFramingSec  
  Counter32 as mscLpDS3PlcpUnavailSec  
  Counter32 as mscLpDS3PlcpFarEndErrorFreeSec  
  Counter32 as mscLpDS3PlcpFarEndCodingViolations  
  Counter32 as mscLpDS3PlcpFarEndErroredSec  
  Counter32 as mscLpDS3PlcpFarEndSevErroredSec  
  Counter32 as mscLpDS3PlcpFarEndUnavailableSec  

MscLpDS3CellRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpDS3CellRowStatus  
  DisplayString as mscLpDS3CellComponentName  
  StorageType as mscLpDS3CellStorageType  
  NonReplicated as mscLpDS3CellIndex  

MscLpDS3CellProvEntry  
SEQUENCE    
  Unsigned32 as mscLpDS3CellAlarmActDelay  
  INTEGER as mscLpDS3CellScrambleCellPayload  
  INTEGER as mscLpDS3CellCorrectSingleBitHeaderErrors  

MscLpDS3CellOperEntry  
SEQUENCE    
  INTEGER as mscLpDS3CellLcdAlarm  

MscLpDS3CellStatsEntry  
SEQUENCE    
  Counter32 as mscLpDS3CellUncorrectableHecErrors  
  Counter32 as mscLpDS3CellSevErroredSec  
  Gauge32 as mscLpDS3CellReceiveCellUtilization  
  Gauge32 as mscLpDS3CellTransmitCellUtilization  
  Counter32 as mscLpDS3CellCorrectableHeaderErrors  

MscLpDS3DS1RowStatusEntry  
SEQUENCE    
  RowStatus as mscLpDS3DS1RowStatus  
  DisplayString as mscLpDS3DS1ComponentName  
  StorageType as mscLpDS3DS1StorageType  
  Integer32 as mscLpDS3DS1Index  

MscLpDS3DS1ProvEntry  
SEQUENCE    
  INTEGER as mscLpDS3DS1LineType  
  INTEGER as mscLpDS3DS1ZeroCoding  
  INTEGER as mscLpDS3DS1ClockingSource  

MscLpDS3DS1CidDataEntry  
SEQUENCE    
  Unsigned32 as mscLpDS3DS1CustomerIdentifier  

MscLpDS3DS1AdminInfoEntry  
SEQUENCE    
  AsciiString as mscLpDS3DS1Vendor  
  AsciiString as mscLpDS3DS1CommentText  

MscLpDS3DS1IfEntryEntry  
SEQUENCE    
  INTEGER as mscLpDS3DS1IfAdminStatus  
  InterfaceIndex as mscLpDS3DS1IfIndex  

MscLpDS3DS1OperStatusEntry  
SEQUENCE    
  INTEGER as mscLpDS3DS1SnmpOperStatus  

MscLpDS3DS1StateEntry  
SEQUENCE    
  INTEGER as mscLpDS3DS1AdminState  
  INTEGER as mscLpDS3DS1OperationalState  
  INTEGER as mscLpDS3DS1UsageState  
  OCTET STRING as mscLpDS3DS1AvailabilityStatus  
  OCTET STRING as mscLpDS3DS1ProceduralStatus  
  OCTET STRING as mscLpDS3DS1ControlStatus  
  OCTET STRING as mscLpDS3DS1AlarmStatus  
  INTEGER as mscLpDS3DS1StandbyStatus  
  INTEGER as mscLpDS3DS1UnknownStatus  

MscLpDS3DS1OperEntry  
SEQUENCE    
  INTEGER as mscLpDS3DS1RxAisAlarm  
  INTEGER as mscLpDS3DS1LofAlarm  
  INTEGER as mscLpDS3DS1RxRaiAlarm  
  INTEGER as mscLpDS3DS1TxAisAlarm  
  INTEGER as mscLpDS3DS1TxRaiAlarm  

MscLpDS3DS1StatsEntry  
SEQUENCE    
  Counter32 as mscLpDS3DS1RunningTime  
  Counter32 as mscLpDS3DS1ErrorFreeSec  
  Counter32 as mscLpDS3DS1ErroredSec  
  Counter32 as mscLpDS3DS1SevErroredSec  
  Counter32 as mscLpDS3DS1SevErroredFrmSec  
  Counter32 as mscLpDS3DS1UnavailSec  
  Counter32 as mscLpDS3DS1CrcErrors  
  Counter32 as mscLpDS3DS1FrmErrors  
  Counter32 as mscLpDS3DS1SlipErrors  

MscLpDS3DS1ChanRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpDS3DS1ChanRowStatus  
  DisplayString as mscLpDS3DS1ChanComponentName  
  StorageType as mscLpDS3DS1ChanStorageType  
  Integer32 as mscLpDS3DS1ChanIndex  

MscLpDS3DS1ChanProvEntry  
SEQUENCE    
  OCTET STRING as mscLpDS3DS1ChanTimeslots  
  INTEGER as mscLpDS3DS1ChanTimeslotDataRate  
  Link as mscLpDS3DS1ChanApplicationFramerName  

MscLpDS3DS1ChanCidDataEntry  
SEQUENCE    
  Unsigned32 as mscLpDS3DS1ChanCustomerIdentifier  

MscLpDS3DS1ChanIfEntryEntry  
SEQUENCE    
  INTEGER as mscLpDS3DS1ChanIfAdminStatus  
  InterfaceIndex as mscLpDS3DS1ChanIfIndex  

MscLpDS3DS1ChanOperStatusEntry  
SEQUENCE    
  INTEGER as mscLpDS3DS1ChanSnmpOperStatus  

MscLpDS3DS1ChanStateEntry  
SEQUENCE    
  INTEGER as mscLpDS3DS1ChanAdminState  
  INTEGER as mscLpDS3DS1ChanOperationalState  
  INTEGER as mscLpDS3DS1ChanUsageState  
  OCTET STRING as mscLpDS3DS1ChanAvailabilityStatus  
  OCTET STRING as mscLpDS3DS1ChanProceduralStatus  
  OCTET STRING as mscLpDS3DS1ChanControlStatus  
  OCTET STRING as mscLpDS3DS1ChanAlarmStatus  
  INTEGER as mscLpDS3DS1ChanStandbyStatus  
  INTEGER as mscLpDS3DS1ChanUnknownStatus  

MscLpDS3DS1ChanOperEntry  
SEQUENCE    
  Gauge32 as mscLpDS3DS1ChanActualChannelSpeed  

MscLpDS3DS1ChanAdminInfoEntry  
SEQUENCE    
  AsciiString as mscLpDS3DS1ChanVendor  
  AsciiString as mscLpDS3DS1ChanCommentText  

MscLpDS3DS1ChanTestRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpDS3DS1ChanTestRowStatus  
  DisplayString as mscLpDS3DS1ChanTestComponentName  
  StorageType as mscLpDS3DS1ChanTestStorageType  
  NonReplicated as mscLpDS3DS1ChanTestIndex  

MscLpDS3DS1ChanTestStateEntry  
SEQUENCE    
  INTEGER as mscLpDS3DS1ChanTestAdminState  
  INTEGER as mscLpDS3DS1ChanTestOperationalState  
  INTEGER as mscLpDS3DS1ChanTestUsageState  

MscLpDS3DS1ChanTestSetupEntry  
SEQUENCE    
  AsciiString as mscLpDS3DS1ChanTestPurpose  
  INTEGER as mscLpDS3DS1ChanTestType  
  Unsigned32 as mscLpDS3DS1ChanTestFrmSize  
  INTEGER as mscLpDS3DS1ChanTestFrmPatternType  
  Hex as mscLpDS3DS1ChanTestCustomizedPattern  
  Unsigned32 as mscLpDS3DS1ChanTestDataStartDelay  
  Unsigned32 as mscLpDS3DS1ChanTestDisplayInterval  
  Unsigned32 as mscLpDS3DS1ChanTestDuration  

MscLpDS3DS1ChanTestResultsEntry  
SEQUENCE    
  Counter32 as mscLpDS3DS1ChanTestElapsedTime  
  Unsigned32 as mscLpDS3DS1ChanTestTimeRemaining  
  INTEGER as mscLpDS3DS1ChanTestCauseOfTermination  
  PassportCounter64 as mscLpDS3DS1ChanTestBitsTx  
  PassportCounter64 as mscLpDS3DS1ChanTestBytesTx  
  PassportCounter64 as mscLpDS3DS1ChanTestFrmTx  
  PassportCounter64 as mscLpDS3DS1ChanTestBitsRx  
  PassportCounter64 as mscLpDS3DS1ChanTestBytesRx  
  PassportCounter64 as mscLpDS3DS1ChanTestFrmRx  
  PassportCounter64 as mscLpDS3DS1ChanTestErroredFrmRx  
  AsciiString as mscLpDS3DS1ChanTestBitErrorRate  

MscLpDS3DS1ChanCellRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpDS3DS1ChanCellRowStatus  
  DisplayString as mscLpDS3DS1ChanCellComponentName  
  StorageType as mscLpDS3DS1ChanCellStorageType  
  NonReplicated as mscLpDS3DS1ChanCellIndex  

MscLpDS3DS1ChanCellProvEntry  
SEQUENCE    
  Unsigned32 as mscLpDS3DS1ChanCellAlarmActDelay  
  INTEGER as mscLpDS3DS1ChanCellScrambleCellPayload  
  INTEGER as mscLpDS3DS1ChanCellCorrectSingleBitHeaderErrors  

MscLpDS3DS1ChanCellOperEntry  
SEQUENCE    
  INTEGER as mscLpDS3DS1ChanCellLcdAlarm  

MscLpDS3DS1ChanCellStatsEntry  
SEQUENCE    
  Counter32 as mscLpDS3DS1ChanCellUncorrectableHecErrors  
  Counter32 as mscLpDS3DS1ChanCellSevErroredSec  
  Gauge32 as mscLpDS3DS1ChanCellReceiveCellUtilization  
  Gauge32 as mscLpDS3DS1ChanCellTransmitCellUtilization  
  Counter32 as mscLpDS3DS1ChanCellCorrectableHeaderErrors  

MscLpDS3DS1ChanTcRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpDS3DS1ChanTcRowStatus  
  DisplayString as mscLpDS3DS1ChanTcComponentName  
  StorageType as mscLpDS3DS1ChanTcStorageType  
  NonReplicated as mscLpDS3DS1ChanTcIndex  

MscLpDS3DS1ChanTcProvEntry  
SEQUENCE    
  Hex as mscLpDS3DS1ChanTcReplacementData  
  Unsigned32 as mscLpDS3DS1ChanTcSignalOneDuration  

MscLpDS3DS1ChanTcOpEntry  
SEQUENCE    
  INTEGER as mscLpDS3DS1ChanTcIngressConditioning  
  INTEGER as mscLpDS3DS1ChanTcEgressConditioning  

MscLpDS3DS1ChanTcSigOneEntry  
SEQUENCE    
  INTEGER as mscLpDS3DS1ChanTcSigOneIndex  
  Unsigned32 as mscLpDS3DS1ChanTcSigOneValue  

MscLpDS3DS1ChanTcSigTwoEntry  
SEQUENCE    
  INTEGER as mscLpDS3DS1ChanTcSigTwoIndex  
  Unsigned32 as mscLpDS3DS1ChanTcSigTwoValue  

MscLpDS3DS1TestRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpDS3DS1TestRowStatus  
  DisplayString as mscLpDS3DS1TestComponentName  
  StorageType as mscLpDS3DS1TestStorageType  
  NonReplicated as mscLpDS3DS1TestIndex  

MscLpDS3DS1TestStateEntry  
SEQUENCE    
  INTEGER as mscLpDS3DS1TestAdminState  
  INTEGER as mscLpDS3DS1TestOperationalState  
  INTEGER as mscLpDS3DS1TestUsageState  

MscLpDS3DS1TestSetupEntry  
SEQUENCE    
  AsciiString as mscLpDS3DS1TestPurpose  
  INTEGER as mscLpDS3DS1TestType  
  Unsigned32 as mscLpDS3DS1TestFrmSize  
  INTEGER as mscLpDS3DS1TestFrmPatternType  
  Hex as mscLpDS3DS1TestCustomizedPattern  
  Unsigned32 as mscLpDS3DS1TestDataStartDelay  
  Unsigned32 as mscLpDS3DS1TestDisplayInterval  
  Unsigned32 as mscLpDS3DS1TestDuration  

MscLpDS3DS1TestResultsEntry  
SEQUENCE    
  Counter32 as mscLpDS3DS1TestElapsedTime  
  Unsigned32 as mscLpDS3DS1TestTimeRemaining  
  INTEGER as mscLpDS3DS1TestCauseOfTermination  
  PassportCounter64 as mscLpDS3DS1TestBitsTx  
  PassportCounter64 as mscLpDS3DS1TestBytesTx  
  PassportCounter64 as mscLpDS3DS1TestFrmTx  
  PassportCounter64 as mscLpDS3DS1TestBitsRx  
  PassportCounter64 as mscLpDS3DS1TestBytesRx  
  PassportCounter64 as mscLpDS3DS1TestFrmRx  
  PassportCounter64 as mscLpDS3DS1TestErroredFrmRx  
  AsciiString as mscLpDS3DS1TestBitErrorRate  

MscLpE3RowStatusEntry  
SEQUENCE    
  RowStatus as mscLpE3RowStatus  
  DisplayString as mscLpE3ComponentName  
  StorageType as mscLpE3StorageType  
  Integer32 as mscLpE3Index  

MscLpE3ProvEntry  
SEQUENCE    
  Unsigned32 as mscLpE3LineLength  
  INTEGER as mscLpE3ClockingSource  
  Link as mscLpE3ApplicationFramerName  
  INTEGER as mscLpE3Mapping  
  INTEGER as mscLpE3Framing  
  Unsigned32 as mscLpE3LinkAlarmActivationThreshold  
  Unsigned32 as mscLpE3LinkAlarmScanInterval  

MscLpE3CidDataEntry  
SEQUENCE    
  Unsigned32 as mscLpE3CustomerIdentifier  

MscLpE3AdminInfoEntry  
SEQUENCE    
  AsciiString as mscLpE3Vendor  
  AsciiString as mscLpE3CommentText  

MscLpE3IfEntryEntry  
SEQUENCE    
  INTEGER as mscLpE3IfAdminStatus  
  InterfaceIndex as mscLpE3IfIndex  

MscLpE3OperStatusEntry  
SEQUENCE    
  INTEGER as mscLpE3SnmpOperStatus  

MscLpE3StateEntry  
SEQUENCE    
  INTEGER as mscLpE3AdminState  
  INTEGER as mscLpE3OperationalState  
  INTEGER as mscLpE3UsageState  
  OCTET STRING as mscLpE3AvailabilityStatus  
  OCTET STRING as mscLpE3ProceduralStatus  
  OCTET STRING as mscLpE3ControlStatus  
  OCTET STRING as mscLpE3AlarmStatus  
  INTEGER as mscLpE3StandbyStatus  
  INTEGER as mscLpE3UnknownStatus  

MscLpE3OperEntry  
SEQUENCE    
  INTEGER as mscLpE3LosAlarm  
  INTEGER as mscLpE3LofAlarm  
  INTEGER as mscLpE3RxAisAlarm  
  INTEGER as mscLpE3RxRaiAlarm  
  INTEGER as mscLpE3TxAis  
  INTEGER as mscLpE3TxRai  

MscLpE3StatsEntry  
SEQUENCE    
  Counter32 as mscLpE3RunningTime  
  Counter32 as mscLpE3ErrorFreeSec  
  Counter32 as mscLpE3LineCodeViolations  
  Counter32 as mscLpE3LineErroredSec  
  Counter32 as mscLpE3LineSevErroredSec  
  Counter32 as mscLpE3LineLosSec  
  Counter32 as mscLpE3LineFailures  
  Counter32 as mscLpE3PathCodeViolations  
  Counter32 as mscLpE3PathErroredSec  
  Counter32 as mscLpE3PathSevErroredSec  
  Counter32 as mscLpE3PathSefAisSec  
  Counter32 as mscLpE3PathUnavailSec  
  Counter32 as mscLpE3PathFailures  

MscLpE3TestRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpE3TestRowStatus  
  DisplayString as mscLpE3TestComponentName  
  StorageType as mscLpE3TestStorageType  
  NonReplicated as mscLpE3TestIndex  

MscLpE3TestStateEntry  
SEQUENCE    
  INTEGER as mscLpE3TestAdminState  
  INTEGER as mscLpE3TestOperationalState  
  INTEGER as mscLpE3TestUsageState  

MscLpE3TestSetupEntry  
SEQUENCE    
  AsciiString as mscLpE3TestPurpose  
  INTEGER as mscLpE3TestType  
  Unsigned32 as mscLpE3TestFrmSize  
  INTEGER as mscLpE3TestFrmPatternType  
  Hex as mscLpE3TestCustomizedPattern  
  Unsigned32 as mscLpE3TestDataStartDelay  
  Unsigned32 as mscLpE3TestDisplayInterval  
  Unsigned32 as mscLpE3TestDuration  

MscLpE3TestResultsEntry  
SEQUENCE    
  Counter32 as mscLpE3TestElapsedTime  
  Unsigned32 as mscLpE3TestTimeRemaining  
  INTEGER as mscLpE3TestCauseOfTermination  
  PassportCounter64 as mscLpE3TestBitsTx  
  PassportCounter64 as mscLpE3TestBytesTx  
  PassportCounter64 as mscLpE3TestFrmTx  
  PassportCounter64 as mscLpE3TestBitsRx  
  PassportCounter64 as mscLpE3TestBytesRx  
  PassportCounter64 as mscLpE3TestFrmRx  
  PassportCounter64 as mscLpE3TestErroredFrmRx  
  AsciiString as mscLpE3TestBitErrorRate  

MscLpE3G832RowStatusEntry  
SEQUENCE    
  RowStatus as mscLpE3G832RowStatus  
  DisplayString as mscLpE3G832ComponentName  
  StorageType as mscLpE3G832StorageType  
  NonReplicated as mscLpE3G832Index  

MscLpE3G832ProvisionedEntry  
SEQUENCE    
  AsciiString as mscLpE3G832TrailTraceTransmitted  
  AsciiString as mscLpE3G832TrailTraceExpected  

MscLpE3G832OperationalEntry  
SEQUENCE    
  INTEGER as mscLpE3G832UnexpectedPayloadType  
  INTEGER as mscLpE3G832TrailTraceMismatch  
  INTEGER as mscLpE3G832TimingMarker  
  AsciiString as mscLpE3G832TrailTraceReceived  

MscLpE3G832StatsEntry  
SEQUENCE    
  Counter32 as mscLpE3G832FarEndErrorFreeSec  
  Counter32 as mscLpE3G832FarEndCodeViolations  
  Counter32 as mscLpE3G832FarEndErroredSec  
  Counter32 as mscLpE3G832FarEndSevErroredSec  
  Counter32 as mscLpE3G832FarEndSefAisSec  
  Counter32 as mscLpE3G832FarEndUnavailSec  

MscLpE3PlcpRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpE3PlcpRowStatus  
  DisplayString as mscLpE3PlcpComponentName  
  StorageType as mscLpE3PlcpStorageType  
  NonReplicated as mscLpE3PlcpIndex  

MscLpE3PlcpOperationalEntry  
SEQUENCE    
  INTEGER as mscLpE3PlcpLofAlarm  
  INTEGER as mscLpE3PlcpRxRaiAlarm  

MscLpE3PlcpStatsEntry  
SEQUENCE    
  Counter32 as mscLpE3PlcpErrorFreeSec  
  Counter32 as mscLpE3PlcpCodingViolations  
  Counter32 as mscLpE3PlcpErroredSec  
  Counter32 as mscLpE3PlcpSevErroredSec  
  Counter32 as mscLpE3PlcpSevErroredFramingSec  
  Counter32 as mscLpE3PlcpUnavailSec  
  Counter32 as mscLpE3PlcpFarEndErrorFreeSec  
  Counter32 as mscLpE3PlcpFarEndCodingViolations  
  Counter32 as mscLpE3PlcpFarEndErroredSec  
  Counter32 as mscLpE3PlcpFarEndSevErroredSec  
  Counter32 as mscLpE3PlcpFarEndUnavailableSec  

MscLpE3CellRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpE3CellRowStatus  
  DisplayString as mscLpE3CellComponentName  
  StorageType as mscLpE3CellStorageType  
  NonReplicated as mscLpE3CellIndex  

MscLpE3CellProvEntry  
SEQUENCE    
  Unsigned32 as mscLpE3CellAlarmActDelay  
  INTEGER as mscLpE3CellScrambleCellPayload  
  INTEGER as mscLpE3CellCorrectSingleBitHeaderErrors  

MscLpE3CellOperEntry  
SEQUENCE    
  INTEGER as mscLpE3CellLcdAlarm  

MscLpE3CellStatsEntry  
SEQUENCE    
  Counter32 as mscLpE3CellUncorrectableHecErrors  
  Counter32 as mscLpE3CellSevErroredSec  
  Gauge32 as mscLpE3CellReceiveCellUtilization  
  Gauge32 as mscLpE3CellTransmitCellUtilization  
  Counter32 as mscLpE3CellCorrectableHeaderErrors  

MscLpDS1RowStatusEntry  
SEQUENCE    
  RowStatus as mscLpDS1RowStatus  
  DisplayString as mscLpDS1ComponentName  
  StorageType as mscLpDS1StorageType  
  Integer32 as mscLpDS1Index  

MscLpDS1ProvEntry  
SEQUENCE    
  INTEGER as mscLpDS1LineType  
  INTEGER as mscLpDS1ZeroCoding  
  INTEGER as mscLpDS1ClockingSource  
  INTEGER as mscLpDS1RaiAlarmType  
  Unsigned32 as mscLpDS1LineLength  

MscLpDS1CidDataEntry  
SEQUENCE    
  Unsigned32 as mscLpDS1CustomerIdentifier  

MscLpDS1AdminInfoEntry  
SEQUENCE    
  AsciiString as mscLpDS1Vendor  
  AsciiString as mscLpDS1CommentText  

MscLpDS1IfEntryEntry  
SEQUENCE    
  INTEGER as mscLpDS1IfAdminStatus  
  InterfaceIndex as mscLpDS1IfIndex  

MscLpDS1OperStatusEntry  
SEQUENCE    
  INTEGER as mscLpDS1SnmpOperStatus  

MscLpDS1StateEntry  
SEQUENCE    
  INTEGER as mscLpDS1AdminState  
  INTEGER as mscLpDS1OperationalState  
  INTEGER as mscLpDS1UsageState  
  OCTET STRING as mscLpDS1AvailabilityStatus  
  OCTET STRING as mscLpDS1ProceduralStatus  
  OCTET STRING as mscLpDS1ControlStatus  
  OCTET STRING as mscLpDS1AlarmStatus  
  INTEGER as mscLpDS1StandbyStatus  
  INTEGER as mscLpDS1UnknownStatus  

MscLpDS1OperEntry  
SEQUENCE    
  INTEGER as mscLpDS1LosAlarm  
  INTEGER as mscLpDS1RxAisAlarm  
  INTEGER as mscLpDS1LofAlarm  
  INTEGER as mscLpDS1RxRaiAlarm  
  INTEGER as mscLpDS1TxAisAlarm  
  INTEGER as mscLpDS1TxRaiAlarm  

MscLpDS1StatsEntry  
SEQUENCE    
  Counter32 as mscLpDS1RunningTime  
  Counter32 as mscLpDS1ErrorFreeSec  
  Counter32 as mscLpDS1ErroredSec  
  Counter32 as mscLpDS1SevErroredSec  
  Counter32 as mscLpDS1SevErroredFrmSec  
  Counter32 as mscLpDS1UnavailSec  
  Counter32 as mscLpDS1BpvErrors  
  Counter32 as mscLpDS1CrcErrors  
  Counter32 as mscLpDS1FrmErrors  
  Counter32 as mscLpDS1LosStateChanges  
  Counter32 as mscLpDS1SlipErrors  

MscLpDS1ChanRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpDS1ChanRowStatus  
  DisplayString as mscLpDS1ChanComponentName  
  StorageType as mscLpDS1ChanStorageType  
  Integer32 as mscLpDS1ChanIndex  

MscLpDS1ChanProvEntry  
SEQUENCE    
  OCTET STRING as mscLpDS1ChanTimeslots  
  INTEGER as mscLpDS1ChanTimeslotDataRate  
  Link as mscLpDS1ChanApplicationFramerName  

MscLpDS1ChanCidDataEntry  
SEQUENCE    
  Unsigned32 as mscLpDS1ChanCustomerIdentifier  

MscLpDS1ChanIfEntryEntry  
SEQUENCE    
  INTEGER as mscLpDS1ChanIfAdminStatus  
  InterfaceIndex as mscLpDS1ChanIfIndex  

MscLpDS1ChanOperStatusEntry  
SEQUENCE    
  INTEGER as mscLpDS1ChanSnmpOperStatus  

MscLpDS1ChanStateEntry  
SEQUENCE    
  INTEGER as mscLpDS1ChanAdminState  
  INTEGER as mscLpDS1ChanOperationalState  
  INTEGER as mscLpDS1ChanUsageState  
  OCTET STRING as mscLpDS1ChanAvailabilityStatus  
  OCTET STRING as mscLpDS1ChanProceduralStatus  
  OCTET STRING as mscLpDS1ChanControlStatus  
  OCTET STRING as mscLpDS1ChanAlarmStatus  
  INTEGER as mscLpDS1ChanStandbyStatus  
  INTEGER as mscLpDS1ChanUnknownStatus  

MscLpDS1ChanOperEntry  
SEQUENCE    
  Gauge32 as mscLpDS1ChanActualChannelSpeed  

MscLpDS1ChanAdminInfoEntry  
SEQUENCE    
  AsciiString as mscLpDS1ChanVendor  
  AsciiString as mscLpDS1ChanCommentText  

MscLpDS1ChanTestRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpDS1ChanTestRowStatus  
  DisplayString as mscLpDS1ChanTestComponentName  
  StorageType as mscLpDS1ChanTestStorageType  
  NonReplicated as mscLpDS1ChanTestIndex  

MscLpDS1ChanTestStateEntry  
SEQUENCE    
  INTEGER as mscLpDS1ChanTestAdminState  
  INTEGER as mscLpDS1ChanTestOperationalState  
  INTEGER as mscLpDS1ChanTestUsageState  

MscLpDS1ChanTestSetupEntry  
SEQUENCE    
  AsciiString as mscLpDS1ChanTestPurpose  
  INTEGER as mscLpDS1ChanTestType  
  Unsigned32 as mscLpDS1ChanTestFrmSize  
  INTEGER as mscLpDS1ChanTestFrmPatternType  
  Hex as mscLpDS1ChanTestCustomizedPattern  
  Unsigned32 as mscLpDS1ChanTestDataStartDelay  
  Unsigned32 as mscLpDS1ChanTestDisplayInterval  
  Unsigned32 as mscLpDS1ChanTestDuration  

MscLpDS1ChanTestResultsEntry  
SEQUENCE    
  Counter32 as mscLpDS1ChanTestElapsedTime  
  Unsigned32 as mscLpDS1ChanTestTimeRemaining  
  INTEGER as mscLpDS1ChanTestCauseOfTermination  
  PassportCounter64 as mscLpDS1ChanTestBitsTx  
  PassportCounter64 as mscLpDS1ChanTestBytesTx  
  PassportCounter64 as mscLpDS1ChanTestFrmTx  
  PassportCounter64 as mscLpDS1ChanTestBitsRx  
  PassportCounter64 as mscLpDS1ChanTestBytesRx  
  PassportCounter64 as mscLpDS1ChanTestFrmRx  
  PassportCounter64 as mscLpDS1ChanTestErroredFrmRx  
  AsciiString as mscLpDS1ChanTestBitErrorRate  

MscLpDS1ChanCellRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpDS1ChanCellRowStatus  
  DisplayString as mscLpDS1ChanCellComponentName  
  StorageType as mscLpDS1ChanCellStorageType  
  NonReplicated as mscLpDS1ChanCellIndex  

MscLpDS1ChanCellProvEntry  
SEQUENCE    
  Unsigned32 as mscLpDS1ChanCellAlarmActDelay  
  INTEGER as mscLpDS1ChanCellScrambleCellPayload  
  INTEGER as mscLpDS1ChanCellCorrectSingleBitHeaderErrors  

MscLpDS1ChanCellOperEntry  
SEQUENCE    
  INTEGER as mscLpDS1ChanCellLcdAlarm  

MscLpDS1ChanCellStatsEntry  
SEQUENCE    
  Counter32 as mscLpDS1ChanCellUncorrectableHecErrors  
  Counter32 as mscLpDS1ChanCellSevErroredSec  
  Gauge32 as mscLpDS1ChanCellReceiveCellUtilization  
  Gauge32 as mscLpDS1ChanCellTransmitCellUtilization  
  Counter32 as mscLpDS1ChanCellCorrectableHeaderErrors  

MscLpDS1ChanTcRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpDS1ChanTcRowStatus  
  DisplayString as mscLpDS1ChanTcComponentName  
  StorageType as mscLpDS1ChanTcStorageType  
  NonReplicated as mscLpDS1ChanTcIndex  

MscLpDS1ChanTcProvEntry  
SEQUENCE    
  Hex as mscLpDS1ChanTcReplacementData  
  Unsigned32 as mscLpDS1ChanTcSignalOneDuration  

MscLpDS1ChanTcOpEntry  
SEQUENCE    
  INTEGER as mscLpDS1ChanTcIngressConditioning  
  INTEGER as mscLpDS1ChanTcEgressConditioning  

MscLpDS1ChanTcSigOneEntry  
SEQUENCE    
  INTEGER as mscLpDS1ChanTcSigOneIndex  
  Unsigned32 as mscLpDS1ChanTcSigOneValue  

MscLpDS1ChanTcSigTwoEntry  
SEQUENCE    
  INTEGER as mscLpDS1ChanTcSigTwoIndex  
  Unsigned32 as mscLpDS1ChanTcSigTwoValue  

MscLpDS1TestRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpDS1TestRowStatus  
  DisplayString as mscLpDS1TestComponentName  
  StorageType as mscLpDS1TestStorageType  
  NonReplicated as mscLpDS1TestIndex  

MscLpDS1TestStateEntry  
SEQUENCE    
  INTEGER as mscLpDS1TestAdminState  
  INTEGER as mscLpDS1TestOperationalState  
  INTEGER as mscLpDS1TestUsageState  

MscLpDS1TestSetupEntry  
SEQUENCE    
  AsciiString as mscLpDS1TestPurpose  
  INTEGER as mscLpDS1TestType  
  Unsigned32 as mscLpDS1TestFrmSize  
  INTEGER as mscLpDS1TestFrmPatternType  
  Hex as mscLpDS1TestCustomizedPattern  
  Unsigned32 as mscLpDS1TestDataStartDelay  
  Unsigned32 as mscLpDS1TestDisplayInterval  
  Unsigned32 as mscLpDS1TestDuration  

MscLpDS1TestResultsEntry  
SEQUENCE    
  Counter32 as mscLpDS1TestElapsedTime  
  Unsigned32 as mscLpDS1TestTimeRemaining  
  INTEGER as mscLpDS1TestCauseOfTermination  
  PassportCounter64 as mscLpDS1TestBitsTx  
  PassportCounter64 as mscLpDS1TestBytesTx  
  PassportCounter64 as mscLpDS1TestFrmTx  
  PassportCounter64 as mscLpDS1TestBitsRx  
  PassportCounter64 as mscLpDS1TestBytesRx  
  PassportCounter64 as mscLpDS1TestFrmRx  
  PassportCounter64 as mscLpDS1TestErroredFrmRx  
  AsciiString as mscLpDS1TestBitErrorRate  

MscLpDS1DspRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpDS1DspRowStatus  
  DisplayString as mscLpDS1DspComponentName  
  StorageType as mscLpDS1DspStorageType  
  NonReplicated as mscLpDS1DspIndex  

MscLpDS1AudioRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpDS1AudioRowStatus  
  DisplayString as mscLpDS1AudioComponentName  
  StorageType as mscLpDS1AudioStorageType  
  NonReplicated as mscLpDS1AudioIndex  

MscLpE1RowStatusEntry  
SEQUENCE    
  RowStatus as mscLpE1RowStatus  
  DisplayString as mscLpE1ComponentName  
  StorageType as mscLpE1StorageType  
  Integer32 as mscLpE1Index  

MscLpE1ProvEntry  
SEQUENCE    
  INTEGER as mscLpE1LineType  
  INTEGER as mscLpE1ClockingSource  
  INTEGER as mscLpE1Crc4Mode  
  INTEGER as mscLpE1SendRaiOnAis  
  Unsigned32 as mscLpE1RaiDeclareAlarmTime  
  Unsigned32 as mscLpE1RaiClearAlarmTime  

MscLpE1CidDataEntry  
SEQUENCE    
  Unsigned32 as mscLpE1CustomerIdentifier  

MscLpE1AdminInfoEntry  
SEQUENCE    
  AsciiString as mscLpE1Vendor  
  AsciiString as mscLpE1CommentText  

MscLpE1IfEntryEntry  
SEQUENCE    
  INTEGER as mscLpE1IfAdminStatus  
  InterfaceIndex as mscLpE1IfIndex  

MscLpE1OperStatusEntry  
SEQUENCE    
  INTEGER as mscLpE1SnmpOperStatus  

MscLpE1StateEntry  
SEQUENCE    
  INTEGER as mscLpE1AdminState  
  INTEGER as mscLpE1OperationalState  
  INTEGER as mscLpE1UsageState  
  OCTET STRING as mscLpE1AvailabilityStatus  
  OCTET STRING as mscLpE1ProceduralStatus  
  OCTET STRING as mscLpE1ControlStatus  
  OCTET STRING as mscLpE1AlarmStatus  
  INTEGER as mscLpE1StandbyStatus  
  INTEGER as mscLpE1UnknownStatus  

MscLpE1OperEntry  
SEQUENCE    
  INTEGER as mscLpE1LosAlarm  
  INTEGER as mscLpE1RxAisAlarm  
  INTEGER as mscLpE1LofAlarm  
  INTEGER as mscLpE1RxRaiAlarm  
  INTEGER as mscLpE1TxAisAlarm  
  INTEGER as mscLpE1TxRaiAlarm  

MscLpE1E1OperEntry  
SEQUENCE    
  INTEGER as mscLpE1MultifrmLofAlarm  
  INTEGER as mscLpE1RxMultifrmRaiAlarm  
  INTEGER as mscLpE1TxMultifrmRaiAlarm  

MscLpE1StatsEntry  
SEQUENCE    
  Counter32 as mscLpE1RunningTime  
  Counter32 as mscLpE1ErrorFreeSec  
  Counter32 as mscLpE1ErroredSec  
  Counter32 as mscLpE1SevErroredSec  
  Counter32 as mscLpE1SevErroredFrmSec  
  Counter32 as mscLpE1UnavailSec  
  Counter32 as mscLpE1BpvErrors  
  Counter32 as mscLpE1CrcErrors  
  Counter32 as mscLpE1FrmErrors  
  Counter32 as mscLpE1LosStateChanges  
  Counter32 as mscLpE1SlipErrors  

MscLpE1ChanRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpE1ChanRowStatus  
  DisplayString as mscLpE1ChanComponentName  
  StorageType as mscLpE1ChanStorageType  
  Integer32 as mscLpE1ChanIndex  

MscLpE1ChanProvEntry  
SEQUENCE    
  OCTET STRING as mscLpE1ChanTimeslots  
  INTEGER as mscLpE1ChanTimeslotDataRate  
  Link as mscLpE1ChanApplicationFramerName  

MscLpE1ChanCidDataEntry  
SEQUENCE    
  Unsigned32 as mscLpE1ChanCustomerIdentifier  

MscLpE1ChanIfEntryEntry  
SEQUENCE    
  INTEGER as mscLpE1ChanIfAdminStatus  
  InterfaceIndex as mscLpE1ChanIfIndex  

MscLpE1ChanOperStatusEntry  
SEQUENCE    
  INTEGER as mscLpE1ChanSnmpOperStatus  

MscLpE1ChanStateEntry  
SEQUENCE    
  INTEGER as mscLpE1ChanAdminState  
  INTEGER as mscLpE1ChanOperationalState  
  INTEGER as mscLpE1ChanUsageState  
  OCTET STRING as mscLpE1ChanAvailabilityStatus  
  OCTET STRING as mscLpE1ChanProceduralStatus  
  OCTET STRING as mscLpE1ChanControlStatus  
  OCTET STRING as mscLpE1ChanAlarmStatus  
  INTEGER as mscLpE1ChanStandbyStatus  
  INTEGER as mscLpE1ChanUnknownStatus  

MscLpE1ChanOperEntry  
SEQUENCE    
  Gauge32 as mscLpE1ChanActualChannelSpeed  

MscLpE1ChanAdminInfoEntry  
SEQUENCE    
  AsciiString as mscLpE1ChanVendor  
  AsciiString as mscLpE1ChanCommentText  

MscLpE1ChanTestRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpE1ChanTestRowStatus  
  DisplayString as mscLpE1ChanTestComponentName  
  StorageType as mscLpE1ChanTestStorageType  
  NonReplicated as mscLpE1ChanTestIndex  

MscLpE1ChanTestStateEntry  
SEQUENCE    
  INTEGER as mscLpE1ChanTestAdminState  
  INTEGER as mscLpE1ChanTestOperationalState  
  INTEGER as mscLpE1ChanTestUsageState  

MscLpE1ChanTestSetupEntry  
SEQUENCE    
  AsciiString as mscLpE1ChanTestPurpose  
  INTEGER as mscLpE1ChanTestType  
  Unsigned32 as mscLpE1ChanTestFrmSize  
  INTEGER as mscLpE1ChanTestFrmPatternType  
  Hex as mscLpE1ChanTestCustomizedPattern  
  Unsigned32 as mscLpE1ChanTestDataStartDelay  
  Unsigned32 as mscLpE1ChanTestDisplayInterval  
  Unsigned32 as mscLpE1ChanTestDuration  

MscLpE1ChanTestResultsEntry  
SEQUENCE    
  Counter32 as mscLpE1ChanTestElapsedTime  
  Unsigned32 as mscLpE1ChanTestTimeRemaining  
  INTEGER as mscLpE1ChanTestCauseOfTermination  
  PassportCounter64 as mscLpE1ChanTestBitsTx  
  PassportCounter64 as mscLpE1ChanTestBytesTx  
  PassportCounter64 as mscLpE1ChanTestFrmTx  
  PassportCounter64 as mscLpE1ChanTestBitsRx  
  PassportCounter64 as mscLpE1ChanTestBytesRx  
  PassportCounter64 as mscLpE1ChanTestFrmRx  
  PassportCounter64 as mscLpE1ChanTestErroredFrmRx  
  AsciiString as mscLpE1ChanTestBitErrorRate  

MscLpE1ChanCellRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpE1ChanCellRowStatus  
  DisplayString as mscLpE1ChanCellComponentName  
  StorageType as mscLpE1ChanCellStorageType  
  NonReplicated as mscLpE1ChanCellIndex  

MscLpE1ChanCellProvEntry  
SEQUENCE    
  Unsigned32 as mscLpE1ChanCellAlarmActDelay  
  INTEGER as mscLpE1ChanCellScrambleCellPayload  
  INTEGER as mscLpE1ChanCellCorrectSingleBitHeaderErrors  

MscLpE1ChanCellOperEntry  
SEQUENCE    
  INTEGER as mscLpE1ChanCellLcdAlarm  

MscLpE1ChanCellStatsEntry  
SEQUENCE    
  Counter32 as mscLpE1ChanCellUncorrectableHecErrors  
  Counter32 as mscLpE1ChanCellSevErroredSec  
  Gauge32 as mscLpE1ChanCellReceiveCellUtilization  
  Gauge32 as mscLpE1ChanCellTransmitCellUtilization  
  Counter32 as mscLpE1ChanCellCorrectableHeaderErrors  

MscLpE1ChanTcRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpE1ChanTcRowStatus  
  DisplayString as mscLpE1ChanTcComponentName  
  StorageType as mscLpE1ChanTcStorageType  
  NonReplicated as mscLpE1ChanTcIndex  

MscLpE1ChanTcProvEntry  
SEQUENCE    
  Hex as mscLpE1ChanTcReplacementData  
  Unsigned32 as mscLpE1ChanTcSignalOneDuration  

MscLpE1ChanTcOpEntry  
SEQUENCE    
  INTEGER as mscLpE1ChanTcIngressConditioning  
  INTEGER as mscLpE1ChanTcEgressConditioning  

MscLpE1ChanTcSigOneEntry  
SEQUENCE    
  INTEGER as mscLpE1ChanTcSigOneIndex  
  Unsigned32 as mscLpE1ChanTcSigOneValue  

MscLpE1ChanTcSigTwoEntry  
SEQUENCE    
  INTEGER as mscLpE1ChanTcSigTwoIndex  
  Unsigned32 as mscLpE1ChanTcSigTwoValue  

MscLpE1ChanFlmRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpE1ChanFlmRowStatus  
  DisplayString as mscLpE1ChanFlmComponentName  
  StorageType as mscLpE1ChanFlmStorageType  
  NonReplicated as mscLpE1ChanFlmIndex  

MscLpE1ChanFlmProvEntry  
SEQUENCE    
  INTEGER as mscLpE1ChanFlmABitMonitoring  
  INTEGER as mscLpE1ChanFlmHdlcMonitoring  

MscLpE1ChanFlmOpEntry  
SEQUENCE    
  INTEGER as mscLpE1ChanFlmFlmStatus  

MscLpE1TestRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpE1TestRowStatus  
  DisplayString as mscLpE1TestComponentName  
  StorageType as mscLpE1TestStorageType  
  NonReplicated as mscLpE1TestIndex  

MscLpE1TestStateEntry  
SEQUENCE    
  INTEGER as mscLpE1TestAdminState  
  INTEGER as mscLpE1TestOperationalState  
  INTEGER as mscLpE1TestUsageState  

MscLpE1TestSetupEntry  
SEQUENCE    
  AsciiString as mscLpE1TestPurpose  
  INTEGER as mscLpE1TestType  
  Unsigned32 as mscLpE1TestFrmSize  
  INTEGER as mscLpE1TestFrmPatternType  
  Hex as mscLpE1TestCustomizedPattern  
  Unsigned32 as mscLpE1TestDataStartDelay  
  Unsigned32 as mscLpE1TestDisplayInterval  
  Unsigned32 as mscLpE1TestDuration  

MscLpE1TestResultsEntry  
SEQUENCE    
  Counter32 as mscLpE1TestElapsedTime  
  Unsigned32 as mscLpE1TestTimeRemaining  
  INTEGER as mscLpE1TestCauseOfTermination  
  PassportCounter64 as mscLpE1TestBitsTx  
  PassportCounter64 as mscLpE1TestBytesTx  
  PassportCounter64 as mscLpE1TestFrmTx  
  PassportCounter64 as mscLpE1TestBitsRx  
  PassportCounter64 as mscLpE1TestBytesRx  
  PassportCounter64 as mscLpE1TestFrmRx  
  PassportCounter64 as mscLpE1TestErroredFrmRx  
  AsciiString as mscLpE1TestBitErrorRate  

MscLpE1DspRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpE1DspRowStatus  
  DisplayString as mscLpE1DspComponentName  
  StorageType as mscLpE1DspStorageType  
  NonReplicated as mscLpE1DspIndex  

MscLpE1AudioRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpE1AudioRowStatus  
  DisplayString as mscLpE1AudioComponentName  
  StorageType as mscLpE1AudioStorageType  
  NonReplicated as mscLpE1AudioIndex  

MscLpV35RowStatusEntry  
SEQUENCE    
  RowStatus as mscLpV35RowStatus  
  DisplayString as mscLpV35ComponentName  
  StorageType as mscLpV35StorageType  
  Integer32 as mscLpV35Index  

MscLpV35ProvEntry  
SEQUENCE    
  INTEGER as mscLpV35LinkMode  
  OCTET STRING as mscLpV35ReadyLineState  
  OCTET STRING as mscLpV35DataTransferLineState  
  Unsigned32 as mscLpV35LineStatusTimeOut  
  Unsigned32 as mscLpV35LineSpeed  
  INTEGER as mscLpV35ClockingSource  
  INTEGER as mscLpV35DteDataClockSource  
  Link as mscLpV35ApplicationFramerName  
  INTEGER as mscLpV35EnableDynamicSpeed  

MscLpV35CidDataEntry  
SEQUENCE    
  Unsigned32 as mscLpV35CustomerIdentifier  

MscLpV35AdminInfoEntry  
SEQUENCE    
  AsciiString as mscLpV35Vendor  
  AsciiString as mscLpV35CommentText  

MscLpV35IfEntryEntry  
SEQUENCE    
  INTEGER as mscLpV35IfAdminStatus  
  InterfaceIndex as mscLpV35IfIndex  

MscLpV35OperStatusEntry  
SEQUENCE    
  INTEGER as mscLpV35SnmpOperStatus  

MscLpV35StateEntry  
SEQUENCE    
  INTEGER as mscLpV35AdminState  
  INTEGER as mscLpV35OperationalState  
  INTEGER as mscLpV35UsageState  
  OCTET STRING as mscLpV35AvailabilityStatus  
  OCTET STRING as mscLpV35ProceduralStatus  
  OCTET STRING as mscLpV35ControlStatus  
  OCTET STRING as mscLpV35AlarmStatus  
  INTEGER as mscLpV35StandbyStatus  
  INTEGER as mscLpV35UnknownStatus  

MscLpV35OperEntry  
SEQUENCE    
  INTEGER as mscLpV35ActualLinkMode  
  OCTET STRING as mscLpV35LineState  
  Gauge32 as mscLpV35ActualTxLineSpeed  
  Gauge32 as mscLpV35ActualRxLineSpeed  
  Counter32 as mscLpV35DataXferStateChanges  

MscLpV35TestRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpV35TestRowStatus  
  DisplayString as mscLpV35TestComponentName  
  StorageType as mscLpV35TestStorageType  
  NonReplicated as mscLpV35TestIndex  

MscLpV35TestStateEntry  
SEQUENCE    
  INTEGER as mscLpV35TestAdminState  
  INTEGER as mscLpV35TestOperationalState  
  INTEGER as mscLpV35TestUsageState  

MscLpV35TestSetupEntry  
SEQUENCE    
  AsciiString as mscLpV35TestPurpose  
  INTEGER as mscLpV35TestType  
  Unsigned32 as mscLpV35TestFrmSize  
  INTEGER as mscLpV35TestFrmPatternType  
  Hex as mscLpV35TestCustomizedPattern  
  Unsigned32 as mscLpV35TestDataStartDelay  
  Unsigned32 as mscLpV35TestDisplayInterval  
  Unsigned32 as mscLpV35TestDuration  

MscLpV35TestResultsEntry  
SEQUENCE    
  Counter32 as mscLpV35TestElapsedTime  
  Unsigned32 as mscLpV35TestTimeRemaining  
  INTEGER as mscLpV35TestCauseOfTermination  
  PassportCounter64 as mscLpV35TestBitsTx  
  PassportCounter64 as mscLpV35TestBytesTx  
  PassportCounter64 as mscLpV35TestFrmTx  
  PassportCounter64 as mscLpV35TestBitsRx  
  PassportCounter64 as mscLpV35TestBytesRx  
  PassportCounter64 as mscLpV35TestFrmRx  
  PassportCounter64 as mscLpV35TestErroredFrmRx  
  AsciiString as mscLpV35TestBitErrorRate  

MscLpX21RowStatusEntry  
SEQUENCE    
  RowStatus as mscLpX21RowStatus  
  DisplayString as mscLpX21ComponentName  
  StorageType as mscLpX21StorageType  
  Integer32 as mscLpX21Index  

MscLpX21ProvEntry  
SEQUENCE    
  INTEGER as mscLpX21LinkMode  
  OCTET STRING as mscLpX21ReadyLineState  
  OCTET STRING as mscLpX21DataTransferLineState  
  Unsigned32 as mscLpX21LineStatusTimeOut  
  Unsigned32 as mscLpX21LineSpeed  
  INTEGER as mscLpX21ClockingSource  
  INTEGER as mscLpX21DteDataClockSource  
  INTEGER as mscLpX21LineTerminationRequired  
  Link as mscLpX21ApplicationFramerName  
  INTEGER as mscLpX21EnableDynamicSpeed  

MscLpX21CidDataEntry  
SEQUENCE    
  Unsigned32 as mscLpX21CustomerIdentifier  

MscLpX21AdminInfoEntry  
SEQUENCE    
  AsciiString as mscLpX21Vendor  
  AsciiString as mscLpX21CommentText  

MscLpX21IfEntryEntry  
SEQUENCE    
  INTEGER as mscLpX21IfAdminStatus  
  InterfaceIndex as mscLpX21IfIndex  

MscLpX21OperStatusEntry  
SEQUENCE    
  INTEGER as mscLpX21SnmpOperStatus  

MscLpX21StateEntry  
SEQUENCE    
  INTEGER as mscLpX21AdminState  
  INTEGER as mscLpX21OperationalState  
  INTEGER as mscLpX21UsageState  
  OCTET STRING as mscLpX21AvailabilityStatus  
  OCTET STRING as mscLpX21ProceduralStatus  
  OCTET STRING as mscLpX21ControlStatus  
  OCTET STRING as mscLpX21AlarmStatus  
  INTEGER as mscLpX21StandbyStatus  
  INTEGER as mscLpX21UnknownStatus  

MscLpX21OperEntry  
SEQUENCE    
  INTEGER as mscLpX21ActualLinkMode  
  OCTET STRING as mscLpX21LineState  
  Gauge32 as mscLpX21ActualTxLineSpeed  
  Gauge32 as mscLpX21ActualRxLineSpeed  
  Counter32 as mscLpX21DataXferStateChanges  

MscLpX21TestRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpX21TestRowStatus  
  DisplayString as mscLpX21TestComponentName  
  StorageType as mscLpX21TestStorageType  
  NonReplicated as mscLpX21TestIndex  

MscLpX21TestStateEntry  
SEQUENCE    
  INTEGER as mscLpX21TestAdminState  
  INTEGER as mscLpX21TestOperationalState  
  INTEGER as mscLpX21TestUsageState  

MscLpX21TestSetupEntry  
SEQUENCE    
  AsciiString as mscLpX21TestPurpose  
  INTEGER as mscLpX21TestType  
  Unsigned32 as mscLpX21TestFrmSize  
  INTEGER as mscLpX21TestFrmPatternType  
  Hex as mscLpX21TestCustomizedPattern  
  Unsigned32 as mscLpX21TestDataStartDelay  
  Unsigned32 as mscLpX21TestDisplayInterval  
  Unsigned32 as mscLpX21TestDuration  

MscLpX21TestResultsEntry  
SEQUENCE    
  Counter32 as mscLpX21TestElapsedTime  
  Unsigned32 as mscLpX21TestTimeRemaining  
  INTEGER as mscLpX21TestCauseOfTermination  
  PassportCounter64 as mscLpX21TestBitsTx  
  PassportCounter64 as mscLpX21TestBytesTx  
  PassportCounter64 as mscLpX21TestFrmTx  
  PassportCounter64 as mscLpX21TestBitsRx  
  PassportCounter64 as mscLpX21TestBytesRx  
  PassportCounter64 as mscLpX21TestFrmRx  
  PassportCounter64 as mscLpX21TestErroredFrmRx  
  AsciiString as mscLpX21TestBitErrorRate  

MscLpSonetRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpSonetRowStatus  
  DisplayString as mscLpSonetComponentName  
  StorageType as mscLpSonetStorageType  
  Integer32 as mscLpSonetIndex  

MscLpSonetProvEntry  
SEQUENCE    
  INTEGER as mscLpSonetClockingSource  

MscLpSonetCidDataEntry  
SEQUENCE    
  Unsigned32 as mscLpSonetCustomerIdentifier  

MscLpSonetAdminInfoEntry  
SEQUENCE    
  AsciiString as mscLpSonetVendor  
  AsciiString as mscLpSonetCommentText  

MscLpSonetIfEntryEntry  
SEQUENCE    
  INTEGER as mscLpSonetIfAdminStatus  
  InterfaceIndex as mscLpSonetIfIndex  

MscLpSonetOperStatusEntry  
SEQUENCE    
  INTEGER as mscLpSonetSnmpOperStatus  

MscLpSonetStateEntry  
SEQUENCE    
  INTEGER as mscLpSonetAdminState  
  INTEGER as mscLpSonetOperationalState  
  INTEGER as mscLpSonetUsageState  
  OCTET STRING as mscLpSonetAvailabilityStatus  
  OCTET STRING as mscLpSonetProceduralStatus  
  OCTET STRING as mscLpSonetControlStatus  
  OCTET STRING as mscLpSonetAlarmStatus  
  INTEGER as mscLpSonetStandbyStatus  
  INTEGER as mscLpSonetUnknownStatus  

MscLpSonetOperEntry  
SEQUENCE    
  INTEGER as mscLpSonetLosAlarm  
  INTEGER as mscLpSonetLofAlarm  
  INTEGER as mscLpSonetRxAisAlarm  
  INTEGER as mscLpSonetRxRfiAlarm  
  INTEGER as mscLpSonetTxAis  
  INTEGER as mscLpSonetTxRdi  
  INTEGER as mscLpSonetUnusableTxClockRefAlarm  

MscLpSonetStatsEntry  
SEQUENCE    
  Counter32 as mscLpSonetRunningTime  
  Counter32 as mscLpSonetErrorFreeSec  
  Counter32 as mscLpSonetSectCodeViolations  
  Counter32 as mscLpSonetSectErroredSec  
  Counter32 as mscLpSonetSectSevErroredSec  
  Counter32 as mscLpSonetSectLosSec  
  Counter32 as mscLpSonetSectSevErroredFrmSec  
  Counter32 as mscLpSonetSectFailures  
  Counter32 as mscLpSonetLineCodeViolations  
  Counter32 as mscLpSonetLineErroredSec  
  Counter32 as mscLpSonetLineSevErroredSec  
  Counter32 as mscLpSonetLineAisSec  
  Counter32 as mscLpSonetLineUnavailSec  
  Counter32 as mscLpSonetLineFailures  
  Counter32 as mscLpSonetFarEndLineErrorFreeSec  
  Counter32 as mscLpSonetFarEndLineCodeViolations  
  Counter32 as mscLpSonetFarEndLineErroredSec  
  Counter32 as mscLpSonetFarEndLineSevErroredSec  
  Counter32 as mscLpSonetFarEndLineAisSec  
  Counter32 as mscLpSonetFarEndLineUnavailSec  
  Counter32 as mscLpSonetFarEndLineFailures  

MscLpSonetPathRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpSonetPathRowStatus  
  DisplayString as mscLpSonetPathComponentName  
  StorageType as mscLpSonetPathStorageType  
  Integer32 as mscLpSonetPathIndex  

MscLpSonetPathProvEntry  
SEQUENCE    
  Link as mscLpSonetPathApplicationFramerName  

MscLpSonetPathCidDataEntry  
SEQUENCE    
  Unsigned32 as mscLpSonetPathCustomerIdentifier  

MscLpSonetPathStateEntry  
SEQUENCE    
  INTEGER as mscLpSonetPathAdminState  
  INTEGER as mscLpSonetPathOperationalState  
  INTEGER as mscLpSonetPathUsageState  
  OCTET STRING as mscLpSonetPathAvailabilityStatus  
  OCTET STRING as mscLpSonetPathProceduralStatus  
  OCTET STRING as mscLpSonetPathControlStatus  
  OCTET STRING as mscLpSonetPathAlarmStatus  
  INTEGER as mscLpSonetPathStandbyStatus  
  INTEGER as mscLpSonetPathUnknownStatus  

MscLpSonetPathIfEntryEntry  
SEQUENCE    
  INTEGER as mscLpSonetPathIfAdminStatus  
  InterfaceIndex as mscLpSonetPathIfIndex  

MscLpSonetPathOperStatusEntry  
SEQUENCE    
  INTEGER as mscLpSonetPathSnmpOperStatus  

MscLpSonetPathOperEntry  
SEQUENCE    
  INTEGER as mscLpSonetPathLopAlarm  
  INTEGER as mscLpSonetPathRxAisAlarm  
  INTEGER as mscLpSonetPathRxRfiAlarm  
  INTEGER as mscLpSonetPathSignalLabelMismatch  
  INTEGER as mscLpSonetPathTxAis  
  INTEGER as mscLpSonetPathTxRdi  

MscLpSonetPathStatsEntry  
SEQUENCE    
  Counter32 as mscLpSonetPathPathErrorFreeSec  
  Counter32 as mscLpSonetPathPathCodeViolations  
  Counter32 as mscLpSonetPathPathErroredSec  
  Counter32 as mscLpSonetPathPathSevErroredSec  
  Counter32 as mscLpSonetPathPathAisLopSec  
  Counter32 as mscLpSonetPathPathUnavailSec  
  Counter32 as mscLpSonetPathPathFailures  
  Counter32 as mscLpSonetPathFarEndPathErrorFreeSec  
  Counter32 as mscLpSonetPathFarEndPathCodeViolations  
  Counter32 as mscLpSonetPathFarEndPathErroredSec  
  Counter32 as mscLpSonetPathFarEndPathSevErroredSec  
  Counter32 as mscLpSonetPathFarEndPathAisLopSec  
  Counter32 as mscLpSonetPathFarEndPathUnavailSec  
  Counter32 as mscLpSonetPathFarEndPathFailures  

MscLpSonetPathCellRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpSonetPathCellRowStatus  
  DisplayString as mscLpSonetPathCellComponentName  
  StorageType as mscLpSonetPathCellStorageType  
  NonReplicated as mscLpSonetPathCellIndex  

MscLpSonetPathCellProvEntry  
SEQUENCE    
  Unsigned32 as mscLpSonetPathCellAlarmActDelay  
  INTEGER as mscLpSonetPathCellScrambleCellPayload  
  INTEGER as mscLpSonetPathCellCorrectSingleBitHeaderErrors  

MscLpSonetPathCellOperEntry  
SEQUENCE    
  INTEGER as mscLpSonetPathCellLcdAlarm  

MscLpSonetPathCellStatsEntry  
SEQUENCE    
  Counter32 as mscLpSonetPathCellUncorrectableHecErrors  
  Counter32 as mscLpSonetPathCellSevErroredSec  
  Gauge32 as mscLpSonetPathCellReceiveCellUtilization  
  Gauge32 as mscLpSonetPathCellTransmitCellUtilization  
  Counter32 as mscLpSonetPathCellCorrectableHeaderErrors  

MscLpSonetTestRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpSonetTestRowStatus  
  DisplayString as mscLpSonetTestComponentName  
  StorageType as mscLpSonetTestStorageType  
  NonReplicated as mscLpSonetTestIndex  

MscLpSonetTestStateEntry  
SEQUENCE    
  INTEGER as mscLpSonetTestAdminState  
  INTEGER as mscLpSonetTestOperationalState  
  INTEGER as mscLpSonetTestUsageState  

MscLpSonetTestSetupEntry  
SEQUENCE    
  AsciiString as mscLpSonetTestPurpose  
  INTEGER as mscLpSonetTestType  
  Unsigned32 as mscLpSonetTestFrmSize  
  INTEGER as mscLpSonetTestFrmPatternType  
  Hex as mscLpSonetTestCustomizedPattern  
  Unsigned32 as mscLpSonetTestDataStartDelay  
  Unsigned32 as mscLpSonetTestDisplayInterval  
  Unsigned32 as mscLpSonetTestDuration  

MscLpSonetTestResultsEntry  
SEQUENCE    
  Counter32 as mscLpSonetTestElapsedTime  
  Unsigned32 as mscLpSonetTestTimeRemaining  
  INTEGER as mscLpSonetTestCauseOfTermination  
  PassportCounter64 as mscLpSonetTestBitsTx  
  PassportCounter64 as mscLpSonetTestBytesTx  
  PassportCounter64 as mscLpSonetTestFrmTx  
  PassportCounter64 as mscLpSonetTestBitsRx  
  PassportCounter64 as mscLpSonetTestBytesRx  
  PassportCounter64 as mscLpSonetTestFrmRx  
  PassportCounter64 as mscLpSonetTestErroredFrmRx  
  AsciiString as mscLpSonetTestBitErrorRate  

MscLpSdhRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpSdhRowStatus  
  DisplayString as mscLpSdhComponentName  
  StorageType as mscLpSdhStorageType  
  Integer32 as mscLpSdhIndex  

MscLpSdhProvEntry  
SEQUENCE    
  INTEGER as mscLpSdhClockingSource  

MscLpSdhCidDataEntry  
SEQUENCE    
  Unsigned32 as mscLpSdhCustomerIdentifier  

MscLpSdhAdminInfoEntry  
SEQUENCE    
  AsciiString as mscLpSdhVendor  
  AsciiString as mscLpSdhCommentText  

MscLpSdhIfEntryEntry  
SEQUENCE    
  INTEGER as mscLpSdhIfAdminStatus  
  InterfaceIndex as mscLpSdhIfIndex  

MscLpSdhOperStatusEntry  
SEQUENCE    
  INTEGER as mscLpSdhSnmpOperStatus  

MscLpSdhStateEntry  
SEQUENCE    
  INTEGER as mscLpSdhAdminState  
  INTEGER as mscLpSdhOperationalState  
  INTEGER as mscLpSdhUsageState  
  OCTET STRING as mscLpSdhAvailabilityStatus  
  OCTET STRING as mscLpSdhProceduralStatus  
  OCTET STRING as mscLpSdhControlStatus  
  OCTET STRING as mscLpSdhAlarmStatus  
  INTEGER as mscLpSdhStandbyStatus  
  INTEGER as mscLpSdhUnknownStatus  

MscLpSdhOperEntry  
SEQUENCE    
  INTEGER as mscLpSdhLosAlarm  
  INTEGER as mscLpSdhLofAlarm  
  INTEGER as mscLpSdhRxAisAlarm  
  INTEGER as mscLpSdhRxRfiAlarm  
  INTEGER as mscLpSdhTxAis  
  INTEGER as mscLpSdhTxRdi  
  INTEGER as mscLpSdhUnusableTxClockRefAlarm  

MscLpSdhStatsEntry  
SEQUENCE    
  Counter32 as mscLpSdhRunningTime  
  Counter32 as mscLpSdhErrorFreeSec  
  Counter32 as mscLpSdhSectCodeViolations  
  Counter32 as mscLpSdhSectErroredSec  
  Counter32 as mscLpSdhSectSevErroredSec  
  Counter32 as mscLpSdhSectLosSec  
  Counter32 as mscLpSdhSectSevErroredFrmSec  
  Counter32 as mscLpSdhSectFailures  
  Counter32 as mscLpSdhLineCodeViolations  
  Counter32 as mscLpSdhLineErroredSec  
  Counter32 as mscLpSdhLineSevErroredSec  
  Counter32 as mscLpSdhLineAisSec  
  Counter32 as mscLpSdhLineUnavailSec  
  Counter32 as mscLpSdhLineFailures  
  Counter32 as mscLpSdhFarEndLineErrorFreeSec  
  Counter32 as mscLpSdhFarEndLineCodeViolations  
  Counter32 as mscLpSdhFarEndLineErroredSec  
  Counter32 as mscLpSdhFarEndLineSevErroredSec  
  Counter32 as mscLpSdhFarEndLineAisSec  
  Counter32 as mscLpSdhFarEndLineUnavailSec  
  Counter32 as mscLpSdhFarEndLineFailures  

MscLpSdhPathRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpSdhPathRowStatus  
  DisplayString as mscLpSdhPathComponentName  
  StorageType as mscLpSdhPathStorageType  
  Integer32 as mscLpSdhPathIndex  

MscLpSdhPathProvEntry  
SEQUENCE    
  Link as mscLpSdhPathApplicationFramerName  

MscLpSdhPathCidDataEntry  
SEQUENCE    
  Unsigned32 as mscLpSdhPathCustomerIdentifier  

MscLpSdhPathStateEntry  
SEQUENCE    
  INTEGER as mscLpSdhPathAdminState  
  INTEGER as mscLpSdhPathOperationalState  
  INTEGER as mscLpSdhPathUsageState  
  OCTET STRING as mscLpSdhPathAvailabilityStatus  
  OCTET STRING as mscLpSdhPathProceduralStatus  
  OCTET STRING as mscLpSdhPathControlStatus  
  OCTET STRING as mscLpSdhPathAlarmStatus  
  INTEGER as mscLpSdhPathStandbyStatus  
  INTEGER as mscLpSdhPathUnknownStatus  

MscLpSdhPathIfEntryEntry  
SEQUENCE    
  INTEGER as mscLpSdhPathIfAdminStatus  
  InterfaceIndex as mscLpSdhPathIfIndex  

MscLpSdhPathOperStatusEntry  
SEQUENCE    
  INTEGER as mscLpSdhPathSnmpOperStatus  

MscLpSdhPathOperEntry  
SEQUENCE    
  INTEGER as mscLpSdhPathLopAlarm  
  INTEGER as mscLpSdhPathRxAisAlarm  
  INTEGER as mscLpSdhPathRxRfiAlarm  
  INTEGER as mscLpSdhPathSignalLabelMismatch  
  INTEGER as mscLpSdhPathTxAis  
  INTEGER as mscLpSdhPathTxRdi  

MscLpSdhPathStatsEntry  
SEQUENCE    
  Counter32 as mscLpSdhPathPathErrorFreeSec  
  Counter32 as mscLpSdhPathPathCodeViolations  
  Counter32 as mscLpSdhPathPathErroredSec  
  Counter32 as mscLpSdhPathPathSevErroredSec  
  Counter32 as mscLpSdhPathPathAisLopSec  
  Counter32 as mscLpSdhPathPathUnavailSec  
  Counter32 as mscLpSdhPathPathFailures  
  Counter32 as mscLpSdhPathFarEndPathErrorFreeSec  
  Counter32 as mscLpSdhPathFarEndPathCodeViolations  
  Counter32 as mscLpSdhPathFarEndPathErroredSec  
  Counter32 as mscLpSdhPathFarEndPathSevErroredSec  
  Counter32 as mscLpSdhPathFarEndPathAisLopSec  
  Counter32 as mscLpSdhPathFarEndPathUnavailSec  
  Counter32 as mscLpSdhPathFarEndPathFailures  

MscLpSdhPathCellRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpSdhPathCellRowStatus  
  DisplayString as mscLpSdhPathCellComponentName  
  StorageType as mscLpSdhPathCellStorageType  
  NonReplicated as mscLpSdhPathCellIndex  

MscLpSdhPathCellProvEntry  
SEQUENCE    
  Unsigned32 as mscLpSdhPathCellAlarmActDelay  
  INTEGER as mscLpSdhPathCellScrambleCellPayload  
  INTEGER as mscLpSdhPathCellCorrectSingleBitHeaderErrors  

MscLpSdhPathCellOperEntry  
SEQUENCE    
  INTEGER as mscLpSdhPathCellLcdAlarm  

MscLpSdhPathCellStatsEntry  
SEQUENCE    
  Counter32 as mscLpSdhPathCellUncorrectableHecErrors  
  Counter32 as mscLpSdhPathCellSevErroredSec  
  Gauge32 as mscLpSdhPathCellReceiveCellUtilization  
  Gauge32 as mscLpSdhPathCellTransmitCellUtilization  
  Counter32 as mscLpSdhPathCellCorrectableHeaderErrors  

MscLpSdhTestRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpSdhTestRowStatus  
  DisplayString as mscLpSdhTestComponentName  
  StorageType as mscLpSdhTestStorageType  
  NonReplicated as mscLpSdhTestIndex  

MscLpSdhTestStateEntry  
SEQUENCE    
  INTEGER as mscLpSdhTestAdminState  
  INTEGER as mscLpSdhTestOperationalState  
  INTEGER as mscLpSdhTestUsageState  

MscLpSdhTestSetupEntry  
SEQUENCE    
  AsciiString as mscLpSdhTestPurpose  
  INTEGER as mscLpSdhTestType  
  Unsigned32 as mscLpSdhTestFrmSize  
  INTEGER as mscLpSdhTestFrmPatternType  
  Hex as mscLpSdhTestCustomizedPattern  
  Unsigned32 as mscLpSdhTestDataStartDelay  
  Unsigned32 as mscLpSdhTestDisplayInterval  
  Unsigned32 as mscLpSdhTestDuration  

MscLpSdhTestResultsEntry  
SEQUENCE    
  Counter32 as mscLpSdhTestElapsedTime  
  Unsigned32 as mscLpSdhTestTimeRemaining  
  INTEGER as mscLpSdhTestCauseOfTermination  
  PassportCounter64 as mscLpSdhTestBitsTx  
  PassportCounter64 as mscLpSdhTestBytesTx  
  PassportCounter64 as mscLpSdhTestFrmTx  
  PassportCounter64 as mscLpSdhTestBitsRx  
  PassportCounter64 as mscLpSdhTestBytesRx  
  PassportCounter64 as mscLpSdhTestFrmRx  
  PassportCounter64 as mscLpSdhTestErroredFrmRx  
  AsciiString as mscLpSdhTestBitErrorRate  

MscLpJT2RowStatusEntry  
SEQUENCE    
  RowStatus as mscLpJT2RowStatus  
  DisplayString as mscLpJT2ComponentName  
  StorageType as mscLpJT2StorageType  
  Integer32 as mscLpJT2Index  

MscLpJT2CidDataEntry  
SEQUENCE    
  Unsigned32 as mscLpJT2CustomerIdentifier  

MscLpJT2ProvEntry  
SEQUENCE    
  INTEGER as mscLpJT2ClockingSource  
  Unsigned32 as mscLpJT2LineLength  
  Link as mscLpJT2ApplicationFramerName  

MscLpJT2IfEntryEntry  
SEQUENCE    
  INTEGER as mscLpJT2IfAdminStatus  
  InterfaceIndex as mscLpJT2IfIndex  

MscLpJT2OperStatusEntry  
SEQUENCE    
  INTEGER as mscLpJT2SnmpOperStatus  

MscLpJT2StateEntry  
SEQUENCE    
  INTEGER as mscLpJT2AdminState  
  INTEGER as mscLpJT2OperationalState  
  INTEGER as mscLpJT2UsageState  
  OCTET STRING as mscLpJT2AvailabilityStatus  
  OCTET STRING as mscLpJT2ProceduralStatus  
  OCTET STRING as mscLpJT2ControlStatus  
  OCTET STRING as mscLpJT2AlarmStatus  
  INTEGER as mscLpJT2StandbyStatus  
  INTEGER as mscLpJT2UnknownStatus  

MscLpJT2OperEntry  
SEQUENCE    
  INTEGER as mscLpJT2LosAlarm  
  INTEGER as mscLpJT2LofAlarm  
  INTEGER as mscLpJT2RxAisPhysicalAlarm  
  INTEGER as mscLpJT2RxAisPayloadAlarm  
  INTEGER as mscLpJT2RxRaiAlarm  
  INTEGER as mscLpJT2TxAisPhysicalAlarm  
  INTEGER as mscLpJT2TxRaiAlarm  

MscLpJT2StatsEntry  
SEQUENCE    
  Counter32 as mscLpJT2RunningTime  
  Counter32 as mscLpJT2ErrorFreeSec  
  Counter32 as mscLpJT2ErroredSec  
  Counter32 as mscLpJT2SevErroredSec  
  Counter32 as mscLpJT2SevErroredFrmSec  
  Counter32 as mscLpJT2UnavailSec  
  Counter32 as mscLpJT2BpvErrors  
  Counter32 as mscLpJT2CrcErrors  
  Counter32 as mscLpJT2FrameErrors  
  Counter32 as mscLpJT2LosStateChanges  

MscLpJT2AdminInfoEntry  
SEQUENCE    
  AsciiString as mscLpJT2Vendor  
  AsciiString as mscLpJT2CommentText  

MscLpJT2TestRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpJT2TestRowStatus  
  DisplayString as mscLpJT2TestComponentName  
  StorageType as mscLpJT2TestStorageType  
  NonReplicated as mscLpJT2TestIndex  

MscLpJT2TestStateEntry  
SEQUENCE    
  INTEGER as mscLpJT2TestAdminState  
  INTEGER as mscLpJT2TestOperationalState  
  INTEGER as mscLpJT2TestUsageState  

MscLpJT2TestSetupEntry  
SEQUENCE    
  AsciiString as mscLpJT2TestPurpose  
  INTEGER as mscLpJT2TestType  
  Unsigned32 as mscLpJT2TestFrmSize  
  INTEGER as mscLpJT2TestFrmPatternType  
  Hex as mscLpJT2TestCustomizedPattern  
  Unsigned32 as mscLpJT2TestDataStartDelay  
  Unsigned32 as mscLpJT2TestDisplayInterval  
  Unsigned32 as mscLpJT2TestDuration  

MscLpJT2TestResultsEntry  
SEQUENCE    
  Counter32 as mscLpJT2TestElapsedTime  
  Unsigned32 as mscLpJT2TestTimeRemaining  
  INTEGER as mscLpJT2TestCauseOfTermination  
  PassportCounter64 as mscLpJT2TestBitsTx  
  PassportCounter64 as mscLpJT2TestBytesTx  
  PassportCounter64 as mscLpJT2TestFrmTx  
  PassportCounter64 as mscLpJT2TestBitsRx  
  PassportCounter64 as mscLpJT2TestBytesRx  
  PassportCounter64 as mscLpJT2TestFrmRx  
  PassportCounter64 as mscLpJT2TestErroredFrmRx  
  AsciiString as mscLpJT2TestBitErrorRate  

MscLpJT2CellRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpJT2CellRowStatus  
  DisplayString as mscLpJT2CellComponentName  
  StorageType as mscLpJT2CellStorageType  
  NonReplicated as mscLpJT2CellIndex  

MscLpJT2CellProvEntry  
SEQUENCE    
  Unsigned32 as mscLpJT2CellAlarmActDelay  
  INTEGER as mscLpJT2CellScrambleCellPayload  
  INTEGER as mscLpJT2CellCorrectSingleBitHeaderErrors  

MscLpJT2CellOperEntry  
SEQUENCE    
  INTEGER as mscLpJT2CellLcdAlarm  

MscLpJT2CellStatsEntry  
SEQUENCE    
  Counter32 as mscLpJT2CellUncorrectableHecErrors  
  Counter32 as mscLpJT2CellSevErroredSec  
  Gauge32 as mscLpJT2CellReceiveCellUtilization  
  Gauge32 as mscLpJT2CellTransmitCellUtilization  
  Counter32 as mscLpJT2CellCorrectableHeaderErrors  

MscLpHssiRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpHssiRowStatus  
  DisplayString as mscLpHssiComponentName  
  StorageType as mscLpHssiStorageType  
  Integer32 as mscLpHssiIndex  

MscLpHssiProvEntry  
SEQUENCE    
  INTEGER as mscLpHssiLinkMode  
  OCTET STRING as mscLpHssiReadyLineState  
  OCTET STRING as mscLpHssiDataTransferLineState  
  Unsigned32 as mscLpHssiLineSpeed  
  Link as mscLpHssiApplicationFramerName  

MscLpHssiCidDataEntry  
SEQUENCE    
  Unsigned32 as mscLpHssiCustomerIdentifier  

MscLpHssiAdminInfoEntry  
SEQUENCE    
  AsciiString as mscLpHssiVendor  
  AsciiString as mscLpHssiCommentText  

MscLpHssiIfEntryEntry  
SEQUENCE    
  INTEGER as mscLpHssiIfAdminStatus  
  InterfaceIndex as mscLpHssiIfIndex  

MscLpHssiOperStatusEntry  
SEQUENCE    
  INTEGER as mscLpHssiSnmpOperStatus  

MscLpHssiStateEntry  
SEQUENCE    
  INTEGER as mscLpHssiAdminState  
  INTEGER as mscLpHssiOperationalState  
  INTEGER as mscLpHssiUsageState  
  OCTET STRING as mscLpHssiAvailabilityStatus  
  OCTET STRING as mscLpHssiProceduralStatus  
  OCTET STRING as mscLpHssiControlStatus  
  OCTET STRING as mscLpHssiAlarmStatus  
  INTEGER as mscLpHssiStandbyStatus  
  INTEGER as mscLpHssiUnknownStatus  

MscLpHssiOperEntry  
SEQUENCE    
  INTEGER as mscLpHssiActualLinkMode  
  OCTET STRING as mscLpHssiLineState  
  Gauge32 as mscLpHssiActualTxLineSpeed  
  Gauge32 as mscLpHssiActualRxLineSpeed  
  Counter32 as mscLpHssiDataXferStateChanges  

MscLpHssiTestRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpHssiTestRowStatus  
  DisplayString as mscLpHssiTestComponentName  
  StorageType as mscLpHssiTestStorageType  
  NonReplicated as mscLpHssiTestIndex  

MscLpHssiTestStateEntry  
SEQUENCE    
  INTEGER as mscLpHssiTestAdminState  
  INTEGER as mscLpHssiTestOperationalState  
  INTEGER as mscLpHssiTestUsageState  

MscLpHssiTestSetupEntry  
SEQUENCE    
  AsciiString as mscLpHssiTestPurpose  
  INTEGER as mscLpHssiTestType  
  Unsigned32 as mscLpHssiTestFrmSize  
  INTEGER as mscLpHssiTestFrmPatternType  
  Hex as mscLpHssiTestCustomizedPattern  
  Unsigned32 as mscLpHssiTestDataStartDelay  
  Unsigned32 as mscLpHssiTestDisplayInterval  
  Unsigned32 as mscLpHssiTestDuration  

MscLpHssiTestResultsEntry  
SEQUENCE    
  Counter32 as mscLpHssiTestElapsedTime  
  Unsigned32 as mscLpHssiTestTimeRemaining  
  INTEGER as mscLpHssiTestCauseOfTermination  
  PassportCounter64 as mscLpHssiTestBitsTx  
  PassportCounter64 as mscLpHssiTestBytesTx  
  PassportCounter64 as mscLpHssiTestFrmTx  
  PassportCounter64 as mscLpHssiTestBitsRx  
  PassportCounter64 as mscLpHssiTestBytesRx  
  PassportCounter64 as mscLpHssiTestFrmRx  
  PassportCounter64 as mscLpHssiTestErroredFrmRx  
  AsciiString as mscLpHssiTestBitErrorRate  

MscLpEngRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpEngRowStatus  
  DisplayString as mscLpEngComponentName  
  StorageType as mscLpEngStorageType  
  NonReplicated as mscLpEngIndex  

MscLpEngDsRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpEngDsRowStatus  
  DisplayString as mscLpEngDsComponentName  
  StorageType as mscLpEngDsStorageType  
  INTEGER as mscLpEngDsIndex  

MscLpEngDsOperEntry  
SEQUENCE    
  Unsigned32 as mscLpEngDsAgentQueueSize  

MscLpEngDsOvRowStatusEntry  
SEQUENCE    
  RowStatus as mscLpEngDsOvRowStatus  
  DisplayString as mscLpEngDsOvComponentName  
  StorageType as mscLpEngDsOvStorageType  
  NonReplicated as mscLpEngDsOvIndex  

MscLpEngDsOvProvEntry  
SEQUENCE    
  Unsigned32 as mscLpEngDsOvAgentQueueSize