Nortel-MsCarrier-MscPassport-TrunksMIB

File: Nortel-MsCarrier-MscPassport-TrunksMIB.mib (92202 bytes)

Imported modules

RFC-1212 Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB
Nortel-MsCarrier-MscPassport-TextualConventionsMIB

Imported symbols

OBJECT-TYPE mscPassportMIBs mscComponents
Counter32 DisplayString StorageType
RowStatus InterfaceIndex Gauge32
Integer32 Unsigned32 AsciiString
NonReplicated PassportCounter64 FixedPoint1
AsciiStringIndex

Defined Objects

mscTrk 1.3.6.1.4.1.562.36.2.1.60
OBJECT IDENTIFIER    

mscTrkRowStatusTable 1.3.6.1.4.1.562.36.2.1.60.1
This entry controls the addition and deletion of mscTrk components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTrkRowStatusEntry

mscTrkRowStatusEntry 1.3.6.1.4.1.562.36.2.1.60.1.1
A single entry in the table represents a single mscTrk component.
OBJECT-TYPE    
  MscTrkRowStatusEntry  

mscTrkRowStatus 1.3.6.1.4.1.562.36.2.1.60.1.1.1
This variable is used as the basis for SNMP naming of mscTrk components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscTrkComponentName 1.3.6.1.4.1.562.36.2.1.60.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscTrkStorageType 1.3.6.1.4.1.562.36.2.1.60.1.1.4
This variable represents the storage type value for the mscTrk tables.
OBJECT-TYPE    
  StorageType  

mscTrkIndex 1.3.6.1.4.1.562.36.2.1.60.1.1.10
This variable represents the index for the mscTrk tables.
OBJECT-TYPE    
  Integer32 0..65535  

mscTrkPorsStats 1.3.6.1.4.1.562.36.2.1.60.6
OBJECT IDENTIFIER    

mscTrkPorsStatsRowStatusTable 1.3.6.1.4.1.562.36.2.1.60.6.1
This entry controls the addition and deletion of mscTrkPorsStats components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTrkPorsStatsRowStatusEntry

mscTrkPorsStatsRowStatusEntry 1.3.6.1.4.1.562.36.2.1.60.6.1.1
A single entry in the table represents a single mscTrkPorsStats component.
OBJECT-TYPE    
  MscTrkPorsStatsRowStatusEntry  

mscTrkPorsStatsRowStatus 1.3.6.1.4.1.562.36.2.1.60.6.1.1.1
This variable is used as the basis for SNMP naming of mscTrkPorsStats components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscTrkPorsStatsComponentName 1.3.6.1.4.1.562.36.2.1.60.6.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscTrkPorsStatsStorageType 1.3.6.1.4.1.562.36.2.1.60.6.1.1.4
This variable represents the storage type value for the mscTrkPorsStats tables.
OBJECT-TYPE    
  StorageType  

mscTrkPorsStatsIndex 1.3.6.1.4.1.562.36.2.1.60.6.1.1.10
This variable represents the index for the mscTrkPorsStats tables.
OBJECT-TYPE    
  NonReplicated  

mscTrkPorsStatsOperTable 1.3.6.1.4.1.562.36.2.1.60.6.10
This operational group provides the PORS Trunks interrupting and normal traffic statistics for operator console display.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTrkPorsStatsOperEntry

mscTrkPorsStatsOperEntry 1.3.6.1.4.1.562.36.2.1.60.6.10.1
An entry in the mscTrkPorsStatsOperTable.
OBJECT-TYPE    
  MscTrkPorsStatsOperEntry  

mscTrkPorsStatsPorsNormPktFromIf 1.3.6.1.4.1.562.36.2.1.60.6.10.1.1
This attribute counts the number of normal priority packets received on the PORS Trunk normal priority queue. This counter wraps around to zero when the maximum value is exceeded.
OBJECT-TYPE    
  PassportCounter64  

mscTrkPorsStatsPorsNormDiscUnforwardFromIf 1.3.6.1.4.1.562.36.2.1.60.6.10.1.2
This attribute counts the number of normal priority packets discarded from the PORS Trunk normal priority queue. This counter wraps around to zero when the maximum value is exceeded.
OBJECT-TYPE    
  PassportCounter64  

mscTrkPorsStatsPorsNormOctetFromIf 1.3.6.1.4.1.562.36.2.1.60.6.10.1.3
This attribute counts the number of normal priority bytes received on the PORS Trunk normal priority queue.This counter wraps around to zero when the maximum value is exceeded.
OBJECT-TYPE    
  PassportCounter64  

mscTrkPorsStatsPorsIntPktFromIf 1.3.6.1.4.1.562.36.2.1.60.6.10.1.4
This attribute counts the number of interrupting priority packets received on the PORS Trunk interrupting priority queue. This counter wraps around to zero when the maximum value is exceeded.
OBJECT-TYPE    
  PassportCounter64  

mscTrkPorsStatsPorsIntDiscUnforwardFromIf 1.3.6.1.4.1.562.36.2.1.60.6.10.1.5
This attribute counts the number of interrupting priority packets discarded from the PORS Trunk interrupting priority queue. This counter wraps around to zero when the maximum value is exceeded.
OBJECT-TYPE    
  PassportCounter64  

mscTrkPorsStatsPorsIntOctetFromIf 1.3.6.1.4.1.562.36.2.1.60.6.10.1.6
This attribute counts the number of interrupting priority bytes received on the PORS Trunk interrupting priority queue. This counter wraps around to zero when the maximum value is exceeded.
OBJECT-TYPE    
  PassportCounter64  

mscTrkPorsStatsPktBpTable 1.3.6.1.4.1.562.36.2.1.60.6.371
This attribute counts the number of PORS packets received by the Trunk. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emission priority is ep0 and the least discardable priority is dp0. These counters wrap around to zero when the maximum value is exceeded.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTrkPorsStatsPktBpEntry

mscTrkPorsStatsPktBpEntry 1.3.6.1.4.1.562.36.2.1.60.6.371.1
An entry in the mscTrkPorsStatsPktBpTable.
OBJECT-TYPE    
  MscTrkPorsStatsPktBpEntry  

mscTrkPorsStatsPktBpEpIndex 1.3.6.1.4.1.562.36.2.1.60.6.371.1.1
This variable represents the next to last index for the mscTrkPorsStatsPktBpTable.
OBJECT-TYPE    
  INTEGER ep0(0), ep1(1), ep2(2)  

mscTrkPorsStatsPktBpDpIndex 1.3.6.1.4.1.562.36.2.1.60.6.371.1.2
This variable represents the final index for the mscTrkPorsStatsPktBpTable.
OBJECT-TYPE    
  INTEGER dp0(0), dp1(1), dp2(2), dp3(3)  

mscTrkPorsStatsPktBpValue 1.3.6.1.4.1.562.36.2.1.60.6.371.1.3
This variable represents an individual value for the mscTrkPorsStatsPktBpTable.
OBJECT-TYPE    
  PassportCounter64  

mscTrkPorsStatsDiscBpTable 1.3.6.1.4.1.562.36.2.1.60.6.372
This attribute counts the number of PORS packets received from the remote module that have been discarded. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emission priority is ep0 and the least discardable priority is dp0. These counters wrap around to zero when the maximum value is exceeded.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTrkPorsStatsDiscBpEntry

mscTrkPorsStatsDiscBpEntry 1.3.6.1.4.1.562.36.2.1.60.6.372.1
An entry in the mscTrkPorsStatsDiscBpTable.
OBJECT-TYPE    
  MscTrkPorsStatsDiscBpEntry  

mscTrkPorsStatsDiscBpEpIndex 1.3.6.1.4.1.562.36.2.1.60.6.372.1.1
This variable represents the next to last index for the mscTrkPorsStatsDiscBpTable.
OBJECT-TYPE    
  INTEGER ep0(0), ep1(1), ep2(2)  

mscTrkPorsStatsDiscBpDpIndex 1.3.6.1.4.1.562.36.2.1.60.6.372.1.2
This variable represents the final index for the mscTrkPorsStatsDiscBpTable.
OBJECT-TYPE    
  INTEGER dp0(0), dp1(1), dp2(2), dp3(3)  

mscTrkPorsStatsDiscBpValue 1.3.6.1.4.1.562.36.2.1.60.6.372.1.3
This variable represents an individual value for the mscTrkPorsStatsDiscBpTable.
OBJECT-TYPE    
  PassportCounter64  

mscTrkPorsStatsOctBpTable 1.3.6.1.4.1.562.36.2.1.60.6.373
This attribute counts the number of PORS octets received by the Trunk. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emission priority is ep0 and the least discardable priority is dp0. These counters wrap around to zero when the maximum value is exceeded.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTrkPorsStatsOctBpEntry

mscTrkPorsStatsOctBpEntry 1.3.6.1.4.1.562.36.2.1.60.6.373.1
An entry in the mscTrkPorsStatsOctBpTable.
OBJECT-TYPE    
  MscTrkPorsStatsOctBpEntry  

mscTrkPorsStatsOctBpEpIndex 1.3.6.1.4.1.562.36.2.1.60.6.373.1.1
This variable represents the next to last index for the mscTrkPorsStatsOctBpTable.
OBJECT-TYPE    
  INTEGER ep0(0), ep1(1), ep2(2)  

mscTrkPorsStatsOctBpDpIndex 1.3.6.1.4.1.562.36.2.1.60.6.373.1.2
This variable represents the final index for the mscTrkPorsStatsOctBpTable.
OBJECT-TYPE    
  INTEGER dp0(0), dp1(1), dp2(2), dp3(3)  

mscTrkPorsStatsOctBpValue 1.3.6.1.4.1.562.36.2.1.60.6.373.1.3
This variable represents an individual value for the mscTrkPorsStatsOctBpTable.
OBJECT-TYPE    
  PassportCounter64  

mscTrkFwdStats 1.3.6.1.4.1.562.36.2.1.60.7
OBJECT IDENTIFIER    

mscTrkFwdStatsRowStatusTable 1.3.6.1.4.1.562.36.2.1.60.7.1
This entry controls the addition and deletion of mscTrkFwdStats components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTrkFwdStatsRowStatusEntry

mscTrkFwdStatsRowStatusEntry 1.3.6.1.4.1.562.36.2.1.60.7.1.1
A single entry in the table represents a single mscTrkFwdStats component.
OBJECT-TYPE    
  MscTrkFwdStatsRowStatusEntry  

mscTrkFwdStatsRowStatus 1.3.6.1.4.1.562.36.2.1.60.7.1.1.1
This variable is used as the basis for SNMP naming of mscTrkFwdStats components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscTrkFwdStatsComponentName 1.3.6.1.4.1.562.36.2.1.60.7.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscTrkFwdStatsStorageType 1.3.6.1.4.1.562.36.2.1.60.7.1.1.4
This variable represents the storage type value for the mscTrkFwdStats tables.
OBJECT-TYPE    
  StorageType  

mscTrkFwdStatsIndex 1.3.6.1.4.1.562.36.2.1.60.7.1.1.10
This variable represents the index for the mscTrkFwdStats tables.
OBJECT-TYPE    
  NonReplicated  

mscTrkFwdStatsOperTable 1.3.6.1.4.1.562.36.2.1.60.7.10
This operational group counts the Trunk or DpnGateway packet forwarding traffic statistics for operator console display.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTrkFwdStatsOperEntry

mscTrkFwdStatsOperEntry 1.3.6.1.4.1.562.36.2.1.60.7.10.1
An entry in the mscTrkFwdStatsOperTable.
OBJECT-TYPE    
  MscTrkFwdStatsOperEntry  

mscTrkFwdStatsFwdPktFromIf 1.3.6.1.4.1.562.36.2.1.60.7.10.1.1
This attribute counts the number of forwarding packets received by the Trunk or DpnGateway. This counter wraps around to zero when the maximum value is exceeded.
OBJECT-TYPE    
  PassportCounter64  

mscTrkFwdStatsFwdDiscUnforwardFromIf 1.3.6.1.4.1.562.36.2.1.60.7.10.1.2
This attribute counts the number of forwarding packets discarded by the Trunk or DpnGateway. This counter wraps around to zero when the maximum value is exceeded.
OBJECT-TYPE    
  PassportCounter64  

mscTrkFwdStatsFwdOctetFromIf 1.3.6.1.4.1.562.36.2.1.60.7.10.1.3
This attribute counts the number of forwarding bytes received by the Trunk or DpnGateway. This counter wraps around to zero when the maximum value is exceeded.
OBJECT-TYPE    
  PassportCounter64  

mscTrkVnsStats 1.3.6.1.4.1.562.36.2.1.60.8
OBJECT IDENTIFIER    

mscTrkVnsStatsRowStatusTable 1.3.6.1.4.1.562.36.2.1.60.8.1
This entry controls the addition and deletion of mscTrkVnsStats components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTrkVnsStatsRowStatusEntry

mscTrkVnsStatsRowStatusEntry 1.3.6.1.4.1.562.36.2.1.60.8.1.1
A single entry in the table represents a single mscTrkVnsStats component.
OBJECT-TYPE    
  MscTrkVnsStatsRowStatusEntry  

mscTrkVnsStatsRowStatus 1.3.6.1.4.1.562.36.2.1.60.8.1.1.1
This variable is used as the basis for SNMP naming of mscTrkVnsStats components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscTrkVnsStatsComponentName 1.3.6.1.4.1.562.36.2.1.60.8.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscTrkVnsStatsStorageType 1.3.6.1.4.1.562.36.2.1.60.8.1.1.4
This variable represents the storage type value for the mscTrkVnsStats tables.
OBJECT-TYPE    
  StorageType  

mscTrkVnsStatsIndex 1.3.6.1.4.1.562.36.2.1.60.8.1.1.10
This variable represents the index for the mscTrkVnsStats tables.
OBJECT-TYPE    
  NonReplicated  

mscTrkVnsStatsOperTable 1.3.6.1.4.1.562.36.2.1.60.8.10
This operational group counts the Trunk virtual network traffic statistics for operator console display.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTrkVnsStatsOperEntry

mscTrkVnsStatsOperEntry 1.3.6.1.4.1.562.36.2.1.60.8.10.1
An entry in the mscTrkVnsStatsOperTable.
OBJECT-TYPE    
  MscTrkVnsStatsOperEntry  

mscTrkVnsStatsVnsPktFromIf 1.3.6.1.4.1.562.36.2.1.60.8.10.1.1
This attribute counts the number of virtual network packets received by a Trunk component handling virtual network traffic. This counter wraps around to zero when the maximum value is exceeded.
OBJECT-TYPE    
  PassportCounter64  

mscTrkVnsStatsVnsDiscUnforwardFromIf 1.3.6.1.4.1.562.36.2.1.60.8.10.1.2
This attribute counts the number of virtual network packets discarded by a Trunk component handling virtual network traffic. This counter wraps around to zero when the maximum value is exceeded.
OBJECT-TYPE    
  PassportCounter64  

mscTrkVnsStatsVnsOctetFromIf 1.3.6.1.4.1.562.36.2.1.60.8.10.1.3
This attribute counts the number of virtual network bytes received by a Trunk component handling virtual network traffic. This counter wraps around to zero when the maximum value is exceeded.
OBJECT-TYPE    
  PassportCounter64  

mscTrkVnsStatsPktBpTable 1.3.6.1.4.1.562.36.2.1.60.8.377
This attribute counts the number of Virtual Network packets received by the Trunk. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emission priority is ep0 and the least discardable priority is dp0. These counters wrap around to zero when the maximum value is exceeded.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTrkVnsStatsPktBpEntry

mscTrkVnsStatsPktBpEntry 1.3.6.1.4.1.562.36.2.1.60.8.377.1
An entry in the mscTrkVnsStatsPktBpTable.
OBJECT-TYPE    
  MscTrkVnsStatsPktBpEntry  

mscTrkVnsStatsPktBpEpIndex 1.3.6.1.4.1.562.36.2.1.60.8.377.1.1
This variable represents the next to last index for the mscTrkVnsStatsPktBpTable.
OBJECT-TYPE    
  INTEGER ep0(0), ep1(1), ep2(2)  

mscTrkVnsStatsPktBpDpIndex 1.3.6.1.4.1.562.36.2.1.60.8.377.1.2
This variable represents the final index for the mscTrkVnsStatsPktBpTable.
OBJECT-TYPE    
  INTEGER dp0(0), dp1(1), dp2(2), dp3(3)  

mscTrkVnsStatsPktBpValue 1.3.6.1.4.1.562.36.2.1.60.8.377.1.3
This variable represents an individual value for the mscTrkVnsStatsPktBpTable.
OBJECT-TYPE    
  PassportCounter64  

mscTrkVnsStatsDiscBpTable 1.3.6.1.4.1.562.36.2.1.60.8.378
This attribute counts the number of Virtual Network packets received from the remote module that have been discarded by the Trunk. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emission priority is ep0 and the least discardable priority is dp0. These counters wrap around to zero when the maximum value is exceeded.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTrkVnsStatsDiscBpEntry

mscTrkVnsStatsDiscBpEntry 1.3.6.1.4.1.562.36.2.1.60.8.378.1
An entry in the mscTrkVnsStatsDiscBpTable.
OBJECT-TYPE    
  MscTrkVnsStatsDiscBpEntry  

mscTrkVnsStatsDiscBpEpIndex 1.3.6.1.4.1.562.36.2.1.60.8.378.1.1
This variable represents the next to last index for the mscTrkVnsStatsDiscBpTable.
OBJECT-TYPE    
  INTEGER ep0(0), ep1(1), ep2(2)  

mscTrkVnsStatsDiscBpDpIndex 1.3.6.1.4.1.562.36.2.1.60.8.378.1.2
This variable represents the final index for the mscTrkVnsStatsDiscBpTable.
OBJECT-TYPE    
  INTEGER dp0(0), dp1(1), dp2(2), dp3(3)  

mscTrkVnsStatsDiscBpValue 1.3.6.1.4.1.562.36.2.1.60.8.378.1.3
This variable represents an individual value for the mscTrkVnsStatsDiscBpTable.
OBJECT-TYPE    
  PassportCounter64  

mscTrkVnsStatsOctBpTable 1.3.6.1.4.1.562.36.2.1.60.8.379
This attribute counts the number of Virtual Network octets received by the Trunk. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emission priority is ep0 and the least discardable priority is dp0. These counters wrap around to zero when the maximum value is exceeded.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTrkVnsStatsOctBpEntry

mscTrkVnsStatsOctBpEntry 1.3.6.1.4.1.562.36.2.1.60.8.379.1
An entry in the mscTrkVnsStatsOctBpTable.
OBJECT-TYPE    
  MscTrkVnsStatsOctBpEntry  

mscTrkVnsStatsOctBpEpIndex 1.3.6.1.4.1.562.36.2.1.60.8.379.1.1
This variable represents the next to last index for the mscTrkVnsStatsOctBpTable.
OBJECT-TYPE    
  INTEGER ep0(0), ep1(1), ep2(2)  

mscTrkVnsStatsOctBpDpIndex 1.3.6.1.4.1.562.36.2.1.60.8.379.1.2
This variable represents the final index for the mscTrkVnsStatsOctBpTable.
OBJECT-TYPE    
  INTEGER dp0(0), dp1(1), dp2(2), dp3(3)  

mscTrkVnsStatsOctBpValue 1.3.6.1.4.1.562.36.2.1.60.8.379.1.3
This variable represents an individual value for the mscTrkVnsStatsOctBpTable.
OBJECT-TYPE    
  PassportCounter64  

mscTrkDprsStats 1.3.6.1.4.1.562.36.2.1.60.10
OBJECT IDENTIFIER    

mscTrkDprsStatsRowStatusTable 1.3.6.1.4.1.562.36.2.1.60.10.1
This entry controls the addition and deletion of mscTrkDprsStats components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTrkDprsStatsRowStatusEntry

mscTrkDprsStatsRowStatusEntry 1.3.6.1.4.1.562.36.2.1.60.10.1.1
A single entry in the table represents a single mscTrkDprsStats component.
OBJECT-TYPE    
  MscTrkDprsStatsRowStatusEntry  

mscTrkDprsStatsRowStatus 1.3.6.1.4.1.562.36.2.1.60.10.1.1.1
This variable is used as the basis for SNMP naming of mscTrkDprsStats components. These components cannot be added nor deleted.
OBJECT-TYPE    
  RowStatus  

mscTrkDprsStatsComponentName 1.3.6.1.4.1.562.36.2.1.60.10.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscTrkDprsStatsStorageType 1.3.6.1.4.1.562.36.2.1.60.10.1.1.4
This variable represents the storage type value for the mscTrkDprsStats tables.
OBJECT-TYPE    
  StorageType  

mscTrkDprsStatsIndex 1.3.6.1.4.1.562.36.2.1.60.10.1.1.10
This variable represents the index for the mscTrkDprsStats tables.
OBJECT-TYPE    
  NonReplicated  

mscTrkDprsStatsPktBpTable 1.3.6.1.4.1.562.36.2.1.60.10.374
This attribute counts the number of DPRS packets received by the Trunk. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emission priority is ep0 and the least discardable priority is dp0. These counters wrap around to zero when the maximum value is exceeded.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTrkDprsStatsPktBpEntry

mscTrkDprsStatsPktBpEntry 1.3.6.1.4.1.562.36.2.1.60.10.374.1
An entry in the mscTrkDprsStatsPktBpTable.
OBJECT-TYPE    
  MscTrkDprsStatsPktBpEntry  

mscTrkDprsStatsPktBpEpIndex 1.3.6.1.4.1.562.36.2.1.60.10.374.1.1
This variable represents the next to last index for the mscTrkDprsStatsPktBpTable.
OBJECT-TYPE    
  INTEGER ep0(0), ep1(1), ep2(2)  

mscTrkDprsStatsPktBpDpIndex 1.3.6.1.4.1.562.36.2.1.60.10.374.1.2
This variable represents the final index for the mscTrkDprsStatsPktBpTable.
OBJECT-TYPE    
  INTEGER dp0(0), dp1(1), dp2(2), dp3(3)  

mscTrkDprsStatsPktBpValue 1.3.6.1.4.1.562.36.2.1.60.10.374.1.3
This variable represents an individual value for the mscTrkDprsStatsPktBpTable.
OBJECT-TYPE    
  PassportCounter64  

mscTrkDprsStatsDiscBpTable 1.3.6.1.4.1.562.36.2.1.60.10.375
This attribute counts the number of DPRS packets received from the remote module that have been discarded by the Trunk. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emission priority is ep0 and the least discardable priority is dp0. These counters wrap around to zero when the maximum value is exceeded.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTrkDprsStatsDiscBpEntry

mscTrkDprsStatsDiscBpEntry 1.3.6.1.4.1.562.36.2.1.60.10.375.1
An entry in the mscTrkDprsStatsDiscBpTable.
OBJECT-TYPE    
  MscTrkDprsStatsDiscBpEntry  

mscTrkDprsStatsDiscBpEpIndex 1.3.6.1.4.1.562.36.2.1.60.10.375.1.1
This variable represents the next to last index for the mscTrkDprsStatsDiscBpTable.
OBJECT-TYPE    
  INTEGER ep0(0), ep1(1), ep2(2)  

mscTrkDprsStatsDiscBpDpIndex 1.3.6.1.4.1.562.36.2.1.60.10.375.1.2
This variable represents the final index for the mscTrkDprsStatsDiscBpTable.
OBJECT-TYPE    
  INTEGER dp0(0), dp1(1), dp2(2), dp3(3)  

mscTrkDprsStatsDiscBpValue 1.3.6.1.4.1.562.36.2.1.60.10.375.1.3
This variable represents an individual value for the mscTrkDprsStatsDiscBpTable.
OBJECT-TYPE    
  PassportCounter64  

mscTrkDprsStatsOctBpTable 1.3.6.1.4.1.562.36.2.1.60.10.376
This attribute counts the number of DPRS octets received by the Trunk. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emission priority is ep0 and the least discardable priority is dp0. These counters wrap around to zero when the maximum value is exceeded.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTrkDprsStatsOctBpEntry

mscTrkDprsStatsOctBpEntry 1.3.6.1.4.1.562.36.2.1.60.10.376.1
An entry in the mscTrkDprsStatsOctBpTable.
OBJECT-TYPE    
  MscTrkDprsStatsOctBpEntry  

mscTrkDprsStatsOctBpEpIndex 1.3.6.1.4.1.562.36.2.1.60.10.376.1.1
This variable represents the next to last index for the mscTrkDprsStatsOctBpTable.
OBJECT-TYPE    
  INTEGER ep0(0), ep1(1), ep2(2)  

mscTrkDprsStatsOctBpDpIndex 1.3.6.1.4.1.562.36.2.1.60.10.376.1.2
This variable represents the final index for the mscTrkDprsStatsOctBpTable.
OBJECT-TYPE    
  INTEGER dp0(0), dp1(1), dp2(2), dp3(3)  

mscTrkDprsStatsOctBpValue 1.3.6.1.4.1.562.36.2.1.60.10.376.1.3
This variable represents an individual value for the mscTrkDprsStatsOctBpTable.
OBJECT-TYPE    
  PassportCounter64  

mscTrkAddr 1.3.6.1.4.1.562.36.2.1.60.11
OBJECT IDENTIFIER    

mscTrkAddrRowStatusTable 1.3.6.1.4.1.562.36.2.1.60.11.1
This entry controls the addition and deletion of mscTrkAddr components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTrkAddrRowStatusEntry

mscTrkAddrRowStatusEntry 1.3.6.1.4.1.562.36.2.1.60.11.1.1
A single entry in the table represents a single mscTrkAddr component.
OBJECT-TYPE    
  MscTrkAddrRowStatusEntry  

mscTrkAddrRowStatus 1.3.6.1.4.1.562.36.2.1.60.11.1.1.1
This variable is used as the basis for SNMP naming of mscTrkAddr components. These components can be added and deleted.
OBJECT-TYPE    
  RowStatus  

mscTrkAddrComponentName 1.3.6.1.4.1.562.36.2.1.60.11.1.1.2
This variable provides the component's string name for use with the ASCII Console Interface
OBJECT-TYPE    
  DisplayString  

mscTrkAddrStorageType 1.3.6.1.4.1.562.36.2.1.60.11.1.1.4
This variable represents the storage type value for the mscTrkAddr tables.
OBJECT-TYPE    
  StorageType  

mscTrkAddrAddressIndex 1.3.6.1.4.1.562.36.2.1.60.11.1.1.10
This variable represents the index for the mscTrkAddr tables.
OBJECT-TYPE    
  AsciiStringIndex SIZE(1..40)  

mscTrkAddrProvTable 1.3.6.1.4.1.562.36.2.1.60.11.10
This group of attributes specifies the provisionable characteristics of the TrkReachableAddress component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTrkAddrProvEntry

mscTrkAddrProvEntry 1.3.6.1.4.1.562.36.2.1.60.11.10.1
An entry in the mscTrkAddrProvTable.
OBJECT-TYPE    
  MscTrkAddrProvEntry  

mscTrkAddrCost 1.3.6.1.4.1.562.36.2.1.60.11.10.1.2
This attribute specifies a cost of using the trunk to reach a destination or destinations described by TrkReachableAddress component. The value is assigned by the network administrator to represent the network cost of using this trunk. It can be related to distance, speed, dollars, or any other factor that could be taken into consideration.
OBJECT-TYPE    
  Unsigned32 0..65435  

mscTrkIfEntryTable 1.3.6.1.4.1.562.36.2.1.60.100
This group contains the provisionable attributes for the ifEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTrkIfEntryEntry

mscTrkIfEntryEntry 1.3.6.1.4.1.562.36.2.1.60.100.1
An entry in the mscTrkIfEntryTable.
OBJECT-TYPE    
  MscTrkIfEntryEntry  

mscTrkIfAdminStatus 1.3.6.1.4.1.562.36.2.1.60.100.1.1
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscTrkIfIndex 1.3.6.1.4.1.562.36.2.1.60.100.1.2
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
OBJECT-TYPE    
  InterfaceIndex 1..65535  

mscTrkProvTable 1.3.6.1.4.1.562.36.2.1.60.101
This group of attributes provides the parameters used by the layer 3 Trunk to Trunk staging protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTrkProvEntry

mscTrkProvEntry 1.3.6.1.4.1.562.36.2.1.60.101.1
An entry in the mscTrkProvTable.
OBJECT-TYPE    
  MscTrkProvEntry  

mscTrkExpectedRemoteNodeName 1.3.6.1.4.1.562.36.2.1.60.101.1.1
This attribute specifies the expected node name of the module to which this Trunk is connected. Once entered, the node name must correspond to the Mod nodeName attribute of the remote node. The Trunk end points exchange their node name through the Trunk staging protocol. The staged value is validated and the remoteValidationAction will be executed for those values not matching the value supplied for this attribute. If this attribute is an empty string, then the comparison is always successful.
OBJECT-TYPE    
  AsciiString SIZE(0..12)  

mscTrkRemoteValidationAction 1.3.6.1.4.1.562.36.2.1.60.101.1.2
This attribute specifies the action to be taken if there is a mismatch between the expectedRemoteNodeName attribute and the value received from the remote end. The remoteValidationAction determines the action when a value is supplied to the expectedRemoteNodeName attribute. If this attribute is provisioned to continue then upon an unsuccessful validation staging continues, otherwise, if disable is set then the Trunk does not continue to stage but, attempts to stage again after a one minute time out. All unsuccessful validation when the expectedRemoteNodeName has been set result in the generation of an alarm.
OBJECT-TYPE    
  INTEGER continue(0), disable(1)  

mscTrkMaximumExpectedRoundTripDelay 1.3.6.1.4.1.562.36.2.1.60.101.1.3
This is the maximum round trip delay value used by the Trunk staging protocol, in conjunction with measuredSpeedToIf, to determine if it has taken too long to successfully stage with a remote Trunk. The value specified must be larger than the measuredRoundTripDelay or the Trunk may not successfully stage.
OBJECT-TYPE    
  Unsigned32 1..1500  

mscTrkIdleTimeOut 1.3.6.1.4.1.562.36.2.1.60.101.1.4
This attribute specifies the Trunk protocol idle time out duration in units of seconds. If the local Trunk does not receive any packets from the link for the period specified by this attribute, the Trunk enters Are You There (AYT) mode for up to two seconds. If the Trunk does not receive any packets from the remote during the AYT mode it will restage; otherwise, it exits AYT mode and continues to provide service.
OBJECT-TYPE    
  Unsigned32 2..30  

mscTrkOverridesTable 1.3.6.1.4.1.562.36.2.1.60.102
Theses attribute comprise the set of provisionable override parameters supported by both the Trunk and DpnGateway components. The attributes are used when reporting operational attributes (used for metric calculations) to the routing system.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTrkOverridesEntry

mscTrkOverridesEntry 1.3.6.1.4.1.562.36.2.1.60.102.1
An entry in the mscTrkOverridesTable.
OBJECT-TYPE    
  MscTrkOverridesEntry  

mscTrkOverrideTransmitSpeed 1.3.6.1.4.1.562.36.2.1.60.102.1.1
This is the overridden value of link speed (bit/s) that, if staged successfully with the remote, is reported to the routing system for metric calculations. A zero indicates that an override value has not been provided and that only the measured value will be reported to the routing system. If this value is changed on a Trunk or DpnGateway that is enabled, the LOCK and UNLOCK commands must be issued to the component to restage the override with the remote.
OBJECT-TYPE    
  Gauge32 0 | 1000..4294967295  

mscTrkOldOverrideRoundTripDelay 1.3.6.1.4.1.562.36.2.1.60.102.1.2
This is the overridden value of link delay (ms) that, if staged successfully with the remote, is reported to the routing system for metric calculations. A zero indicates that an override value has not been provided and that only the measured value will be reported to the routing system. If this value is changed on a Trunk or DpnGateway that is enabled, the LOCK and UNLOCK commands must be issued to the component to restage the override with the remote.
OBJECT-TYPE    
  Gauge32 0..1500  

mscTrkOverrideRoundTripUsec 1.3.6.1.4.1.562.36.2.1.60.102.1.3
This is the overridden value of link delay (ms) that, if staged successfully with the remote, is reported to the routing system for metric calculations. A zero indicates that an override value has not been provided and that only the measured value will be reported to the routing system. If this value is changed on a Trunk or DpnGateway that is enabled, the LOCK and UNLOCK commands must be issued to the component to restage the override with the remote.
OBJECT-TYPE    
  FixedPoint1 0..15000  

mscTrkStateTable 1.3.6.1.4.1.562.36.2.1.60.103
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTrkStateEntry

mscTrkStateEntry 1.3.6.1.4.1.562.36.2.1.60.103.1
An entry in the mscTrkStateTable.
OBJECT-TYPE    
  MscTrkStateEntry  

mscTrkAdminState 1.3.6.1.4.1.562.36.2.1.60.103.1.1
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER locked(0), unlocked(1), shuttingDown(2)  

mscTrkOperationalState 1.3.6.1.4.1.562.36.2.1.60.103.1.2
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

mscTrkUsageState 1.3.6.1.4.1.562.36.2.1.60.103.1.3
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OBJECT-TYPE    
  INTEGER idle(0), active(1), busy(2)  

mscTrkAvailabilityStatus 1.3.6.1.4.1.562.36.2.1.60.103.1.4
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

mscTrkProceduralStatus 1.3.6.1.4.1.562.36.2.1.60.103.1.5
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscTrkControlStatus 1.3.6.1.4.1.562.36.2.1.60.103.1.6
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscTrkAlarmStatus 1.3.6.1.4.1.562.36.2.1.60.103.1.7
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

mscTrkStandbyStatus 1.3.6.1.4.1.562.36.2.1.60.103.1.8
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
OBJECT-TYPE    
  INTEGER hotStandby(0), coldStandby(1), providingService(2), notSet(15)  

mscTrkUnknownStatus 1.3.6.1.4.1.562.36.2.1.60.103.1.9
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

mscTrkOperStatusTable 1.3.6.1.4.1.562.36.2.1.60.104
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTrkOperStatusEntry

mscTrkOperStatusEntry 1.3.6.1.4.1.562.36.2.1.60.104.1
An entry in the mscTrkOperStatusTable.
OBJECT-TYPE    
  MscTrkOperStatusEntry  

mscTrkSnmpOperStatus 1.3.6.1.4.1.562.36.2.1.60.104.1.1
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

mscTrkOperTable 1.3.6.1.4.1.562.36.2.1.60.105
This is the group of operational attributes supported by the Trunk.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTrkOperEntry

mscTrkOperEntry 1.3.6.1.4.1.562.36.2.1.60.105.1
An entry in the mscTrkOperTable.
OBJECT-TYPE    
  MscTrkOperEntry  

mscTrkRemoteComponentName 1.3.6.1.4.1.562.36.2.1.60.105.1.1
This attribute is the component name of the remote end which it has supplied through the Trunk staging protocol.
OBJECT-TYPE    
  AsciiString SIZE(1..27)  

mscTrkTransportTable 1.3.6.1.4.1.562.36.2.1.60.106
This group of attributes contains the set of operational parameters measured and maintained by both the Trunk and DpnGateway components.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTrkTransportEntry

mscTrkTransportEntry 1.3.6.1.4.1.562.36.2.1.60.106.1
An entry in the mscTrkTransportTable.
OBJECT-TYPE    
  MscTrkTransportEntry  

mscTrkMeasuredSpeedToIf 1.3.6.1.4.1.562.36.2.1.60.106.1.1
This attribute indicates the current 'transmittable' bandwidth of the underlying facility. For a Trunk with a Unack subcomponent, and a DpnGateway with a Utp subcomponent, if a serial port is used, the value is the measured transmit speed of the port; if a channelized port (E1/DS1) is used, the value is the measured transmit speed of the Channel. For a Trunk with an AtmAccess subcomponent, the value is calculated by converting the VCC transmit cell rate to an equivalent bit rate. The VCC transmit cell rate is determined based on the vccReportingBw attribute of the Trunk AtmAccess component. If vccReportingBw has a value of pcr and attribute bwElastic of AtmAccess has a value of no, the peak cell rate (PCR) of the VCC, defined in txTrafficDescParm of AtmIf Vcc Vcd, is used. If vccReportingBw has a value of pcr and attribute bwElastic of AtmAccess has a value of yes, the minimum of the PCR, defined in txTrafficDescParm of AtmIf Vcc Vcd, and the current cell rate (CCR) of the VCC is used. If vccReportingBw has a value of acr, the best measurement of the actual cell rate (ACR) of the VCC is used, which is the minimum of the PCR, the CCR and the actual shaping rate (ASR). For a DpnGateway with a FrAccess subcomponent, the value indicates the committedInformationRate of FrAccess FrMuxSetup. A value of zero is displayed when the underlying facility is disabled or the current 'transmittable' bandwidth is unknown.
OBJECT-TYPE    
  Gauge32 0..4294967295  

mscTrkMeasuredRoundTripDelay 1.3.6.1.4.1.562.36.2.1.60.106.1.2
This attribute indicates the measured Round Trip Delay (msec) discovered with the remote through the Trunk and DpnGateway staging protocols. The value includes emission, propagation, and queuing delays. A 512 byte data packet is used to perform the measurement. A value of zero is displayed when the link is disabled or the measured Round Trip Delay is unknown.
OBJECT-TYPE    
  Gauge32 0..1500  

mscTrkMaxTxUnit 1.3.6.1.4.1.562.36.2.1.60.106.1.3
This is the maximum transmission unit (byte size) that is supported by the Trunk or DpnGateway component. This size includes the data and routing headers. A value of zero indicates the MTU has not yet been determined.
OBJECT-TYPE    
  Gauge32 0..65535  

mscTrkMeasuredRoundTripDelayUsec 1.3.6.1.4.1.562.36.2.1.60.106.1.4
This attribute indicates the measured Round Trip Delay (msec) discovered with the remote through the Trunk and DpnGateway staging protocols. The value includes emission, propagation, and queuing delays. A 512 byte data packet is used to perform the measurement. A value of zero is displayed when the link is disabled or the measured Round Trip Delay is unknown.
OBJECT-TYPE    
  FixedPoint1 0..15000  

mscTrkStatsTable 1.3.6.1.4.1.562.36.2.1.60.107
These attributes comprise the statistics collected by the Trunk component.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTrkStatsEntry

mscTrkStatsEntry 1.3.6.1.4.1.562.36.2.1.60.107.1
An entry in the mscTrkStatsTable.
OBJECT-TYPE    
  MscTrkStatsEntry  

mscTrkAreYouThereModeEntries 1.3.6.1.4.1.562.36.2.1.60.107.1.1
This attribute counts the number of times that the component has entered Are You There mode. This counter wraps around to zero when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

mscTrkPktFromIf 1.3.6.1.4.1.562.36.2.1.60.107.1.2
This attribute counts the number of packets received from the remote module. It does not include the packets received from the interrupting queue. This counter wraps around to zero when the maximum value is exceeded.
OBJECT-TYPE    
  PassportCounter64  

mscTrkTrunkPktFromIf 1.3.6.1.4.1.562.36.2.1.60.107.1.3
This attribute counts the number of internal trunk protocol packets (including those from the interrupting queue) received from the remote module. These packets are forwarded to the Trunk component. This counter wraps around to zero when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

mscTrkTrunkPktToIf 1.3.6.1.4.1.562.36.2.1.60.107.1.4
This attribute counts the number of internal trunk protocol packets (including those through the interrupting queue) transmitted to the remote module. This counter wraps around to zero when the maximum value is exceeded.
OBJECT-TYPE    
  Counter32  

mscTrkDiscardUnforward 1.3.6.1.4.1.562.36.2.1.60.107.1.5
This attribute counts the number of packets received from the remote module that have been discarded. It does not include the packets received from the interrupting queue that have been discarded. This counter wraps around to zero when the maximum value is exceeded. Two main reasons that cause this counter to increase are: (1) the remote protocol is not compatible with the local protocol stack or, (2) the packet cannot be forwarded due to a recent loss of connectivity or due to congestion.
OBJECT-TYPE    
  PassportCounter64  

mscTrkDiscardTrunkPktFromIf 1.3.6.1.4.1.562.36.2.1.60.107.1.6
This attribute counts the number of internal trunk protocol packets (including those on the interrupting queue) received from the remote module that have been discarded. This counter wraps around to zero when the maximum value is exceeded. The three main reasons that cause this counter to increase are: (1) the two Trunks are not synchronized, (2) the remote trunk protocol is not the same version as the local protocol, and (3) the remote trunk has restaged.
OBJECT-TYPE    
  Counter32  

mscTrkIntPktFromIf 1.3.6.1.4.1.562.36.2.1.60.107.1.7
This attribute counts the number of packets received on the interrupting queue from the remote module. This counter wraps around to zero when the maximum value is exceeded.
OBJECT-TYPE    
  PassportCounter64  

mscTrkDiscardIntUnforward 1.3.6.1.4.1.562.36.2.1.60.107.1.8
This attribute counts the number of packets received on the interrupting queue from the remote module that have been discarded. This counter wraps around to zero when the maximum value is exceeded. Two main reasons that cause this counter to increment are: (1) the remote protocol is not compatible to the local protocol stack and, (2) the packet cannot be forwarded due to either a recent loss of connectivity or due to congestion.
OBJECT-TYPE    
  PassportCounter64  

mscTrkStagingAttempts 1.3.6.1.4.1.562.36.2.1.60.107.1.9
This attribute counts the number of times that the staging protocol has attempted to stage with the remote module. This counter wraps around to zero when the maximum value is exceeded. The main reason that causes this counter to increment is that the local hardware is up but, the local protocol cannot stage with the remote protocol due to a faulty connection. If the value is zero, then the local hardware has never enabled successfully.
OBJECT-TYPE    
  Counter32  

mscTrkDiscardTrunkPktToIf 1.3.6.1.4.1.562.36.2.1.60.107.1.10
This attribute counts the number of internal trunk protocol packets (including those through the interrupting queue) that have been discarded before being transmitted to the remote module. This counter wraps around to zero when the maximum value is exceeded. The main reason that causes this counter to increment is that the trunk can not get sufficient resources to create an internal trunk protocol packet.
OBJECT-TYPE    
  Counter32  

mscTrkSpeedReportingTable 1.3.6.1.4.1.562.36.2.1.60.109
This group of provisionable attributes provides the ability to disable or enable the generation of speed change alarms by the Trunk component. It also provides the ability to disable or enable the Dynamic Speed Reporting mechanism.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTrkSpeedReportingEntry

mscTrkSpeedReportingEntry 1.3.6.1.4.1.562.36.2.1.60.109.1
An entry in the mscTrkSpeedReportingTable.
OBJECT-TYPE    
  MscTrkSpeedReportingEntry  

mscTrkSpeedReportingHoldOff 1.3.6.1.4.1.562.36.2.1.60.109.1.2
This attribute specifies the hold off time for reporting speed increases. When the measuredSpeedToIf reaches a level specified by the speedReportingThresholds attribute, the value specifies the duration (in units of seconds) for which the measuredSpeedToIf must maintain that level before it will be reported.
OBJECT-TYPE    
  Unsigned32 1..1200  

mscTrkLowSpeedAlarmThreshold 1.3.6.1.4.1.562.36.2.1.60.109.1.3
This attribute specifies the lower end of the range of normal speeds for this Trunk. If the measuredSpeedToIf drops below this value the Trunk component generates a SET alarm. When the measuredSpeedToIf reaches or exceeds the value of this attribute, the Trunk component will generate a CLEAR alarm.
OBJECT-TYPE    
  Unsigned32 0 | 1..4294967295  

mscTrkHighSpeedAlarmThreshold 1.3.6.1.4.1.562.36.2.1.60.109.1.4
This attribute specifies the upper end of the range of normal speeds for this Trunk. If the measuredSpeedToIf exceeds this value the Trunk component generates a SET alarm. When the measuredSpeedToIf returns to or falls below the value of this attribute, the Trunk component will generate a CLEAR alarm.
OBJECT-TYPE    
  Unsigned32 1..4294967295  

mscTrkSpdThTable 1.3.6.1.4.1.562.36.2.1.60.318
This attribute controls the behavior of the Dynamic Speed Reporting mechanism. If its value is empty then the mechanism is disabled and neither increases nor decreases are reported. Otherwise, the attribute may contain up to seven threshold levels which are used to control the reporting of speed increases. Speed decreases are always reported immediately. If the measuredSpeedToIf increases such that it reaches one of the threshold levels which is greater than the last reported speed, the Trunk starts the speedReportingHoldOff timer. If the speed remains above this threshold until the timer expires, the Trunk component then reports the measuredSpeedToIf; otherwise the increase is not reported.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTrkSpdThEntry

mscTrkSpdThEntry 1.3.6.1.4.1.562.36.2.1.60.318.1
An entry in the mscTrkSpdThTable.
OBJECT-TYPE    
  MscTrkSpdThEntry  

mscTrkSpdThValue 1.3.6.1.4.1.562.36.2.1.60.318.1.1
This variable represents both the value and the index for the mscTrkSpdThTable.
OBJECT-TYPE    
  Integer32 0..268435455  

mscTrkSpdThRowStatus 1.3.6.1.4.1.562.36.2.1.60.318.1.2
This variable is used to control the addition and deletion of individual values of the mscTrkSpdThTable.
OBJECT-TYPE    
  RowStatus  

mscTrkPktBpTable 1.3.6.1.4.1.562.36.2.1.60.368
This attribute counts the number of packets received by the Trunk. It is a vector indexed by the emission priorities (ep0, ep1, and ep2) of the packets. The highest emission priority is ep0. These counters wrap around to zero when the maximum value is exceeded.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTrkPktBpEntry

mscTrkPktBpEntry 1.3.6.1.4.1.562.36.2.1.60.368.1
An entry in the mscTrkPktBpTable.
OBJECT-TYPE    
  MscTrkPktBpEntry  

mscTrkPktBpIndex 1.3.6.1.4.1.562.36.2.1.60.368.1.1
This variable represents the mscTrkPktBpTable specific index for the mscTrkPktBpTable.
OBJECT-TYPE    
  INTEGER ep0(0), ep1(1), ep2(2)  

mscTrkPktBpValue 1.3.6.1.4.1.562.36.2.1.60.368.1.2
This variable represents an individual value for the mscTrkPktBpTable.
OBJECT-TYPE    
  PassportCounter64  

mscTrkDiscBpTable 1.3.6.1.4.1.562.36.2.1.60.369
This attribute counts the number of packets received from the remote module that have been discarded. It is a vector indexed by the emission priorities (ep0, ep1 and ep2) of the packets. The highest emission priority is ep0. These counters wrap around to zero when the maximum value is exceeded. Two main reasons that cause this counter to increment are: (1) the remote protocol is not compatible to the local protocol stack and, (2) the packet cannot be forwarded due to either a recent loss of connectivity or due to congestion. DESCRIPTION
OBJECT-TYPE    
  SEQUENCE OF  
    MscTrkDiscBpEntry

mscTrkDiscBpEntry 1.3.6.1.4.1.562.36.2.1.60.369.1
An entry in the mscTrkDiscBpTable.
OBJECT-TYPE    
  MscTrkDiscBpEntry  

mscTrkDiscBpIndex 1.3.6.1.4.1.562.36.2.1.60.369.1.1
This variable represents the mscTrkDiscBpTable specific index for the mscTrkDiscBpTable.
OBJECT-TYPE    
  INTEGER ep0(0), ep1(1), ep2(2)  

mscTrkDiscBpValue 1.3.6.1.4.1.562.36.2.1.60.369.1.2
This variable represents an individual value for the mscTrkDiscBpTable.
OBJECT-TYPE    
  PassportCounter64  

mscTrkOctBpTable 1.3.6.1.4.1.562.36.2.1.60.370
This attribute counts the octets coming from the remote module which are received by the Trunk. It is a vector indexed by the emission priorities (ep0, ep1 and ep2) of the packets. The highest emission priority is ep0. These counters wrap around to zero when the maximum value is exceeded.
OBJECT-TYPE    
  SEQUENCE OF  
    MscTrkOctBpEntry

mscTrkOctBpEntry 1.3.6.1.4.1.562.36.2.1.60.370.1
An entry in the mscTrkOctBpTable.
OBJECT-TYPE    
  MscTrkOctBpEntry  

mscTrkOctBpIndex 1.3.6.1.4.1.562.36.2.1.60.370.1.1
This variable represents the mscTrkOctBpTable specific index for the mscTrkOctBpTable.
OBJECT-TYPE    
  INTEGER ep0(0), ep1(1), ep2(2)  

mscTrkOctBpValue 1.3.6.1.4.1.562.36.2.1.60.370.1.2
This variable represents an individual value for the mscTrkOctBpTable.
OBJECT-TYPE    
  PassportCounter64  

trunksMIB 1.3.6.1.4.1.562.36.2.2.43
OBJECT IDENTIFIER    

trunksGroup 1.3.6.1.4.1.562.36.2.2.43.1
OBJECT IDENTIFIER    

trunksGroupCA 1.3.6.1.4.1.562.36.2.2.43.1.1
OBJECT IDENTIFIER    

trunksGroupCA02 1.3.6.1.4.1.562.36.2.2.43.1.1.3
OBJECT IDENTIFIER    

trunksGroupCA02A 1.3.6.1.4.1.562.36.2.2.43.1.1.3.2
OBJECT IDENTIFIER    

trunksCapabilities 1.3.6.1.4.1.562.36.2.2.43.3
OBJECT IDENTIFIER    

trunksCapabilitiesCA 1.3.6.1.4.1.562.36.2.2.43.3.1
OBJECT IDENTIFIER    

trunksCapabilitiesCA02 1.3.6.1.4.1.562.36.2.2.43.3.1.3
OBJECT IDENTIFIER    

trunksCapabilitiesCA02A 1.3.6.1.4.1.562.36.2.2.43.3.1.3.2
OBJECT IDENTIFIER    

Defined Objects

MscTrkRowStatusEntry  
SEQUENCE    
  RowStatus as mscTrkRowStatus  
  DisplayString as mscTrkComponentName  
  StorageType as mscTrkStorageType  
  Integer32 as mscTrkIndex  

MscTrkIfEntryEntry  
SEQUENCE    
  INTEGER as mscTrkIfAdminStatus  
  InterfaceIndex as mscTrkIfIndex  

MscTrkProvEntry  
SEQUENCE    
  AsciiString as mscTrkExpectedRemoteNodeName  
  INTEGER as mscTrkRemoteValidationAction  
  Unsigned32 as mscTrkMaximumExpectedRoundTripDelay  
  Unsigned32 as mscTrkIdleTimeOut  

MscTrkOverridesEntry  
SEQUENCE    
  Gauge32 as mscTrkOverrideTransmitSpeed  
  Gauge32 as mscTrkOldOverrideRoundTripDelay  
  FixedPoint1 as mscTrkOverrideRoundTripUsec  

MscTrkStateEntry  
SEQUENCE    
  INTEGER as mscTrkAdminState  
  INTEGER as mscTrkOperationalState  
  INTEGER as mscTrkUsageState  
  OCTET STRING as mscTrkAvailabilityStatus  
  OCTET STRING as mscTrkProceduralStatus  
  OCTET STRING as mscTrkControlStatus  
  OCTET STRING as mscTrkAlarmStatus  
  INTEGER as mscTrkStandbyStatus  
  INTEGER as mscTrkUnknownStatus  

MscTrkOperStatusEntry  
SEQUENCE    
  INTEGER as mscTrkSnmpOperStatus  

MscTrkOperEntry  
SEQUENCE    
  AsciiString as mscTrkRemoteComponentName  

MscTrkTransportEntry  
SEQUENCE    
  Gauge32 as mscTrkMeasuredSpeedToIf  
  Gauge32 as mscTrkMeasuredRoundTripDelay  
  Gauge32 as mscTrkMaxTxUnit  
  FixedPoint1 as mscTrkMeasuredRoundTripDelayUsec  

MscTrkStatsEntry  
SEQUENCE    
  Counter32 as mscTrkAreYouThereModeEntries  
  PassportCounter64 as mscTrkPktFromIf  
  Counter32 as mscTrkTrunkPktFromIf  
  Counter32 as mscTrkTrunkPktToIf  
  PassportCounter64 as mscTrkDiscardUnforward  
  Counter32 as mscTrkDiscardTrunkPktFromIf  
  PassportCounter64 as mscTrkIntPktFromIf  
  PassportCounter64 as mscTrkDiscardIntUnforward  
  Counter32 as mscTrkStagingAttempts  
  Counter32 as mscTrkDiscardTrunkPktToIf  

MscTrkSpeedReportingEntry  
SEQUENCE    
  Unsigned32 as mscTrkSpeedReportingHoldOff  
  Unsigned32 as mscTrkLowSpeedAlarmThreshold  
  Unsigned32 as mscTrkHighSpeedAlarmThreshold  

MscTrkSpdThEntry  
SEQUENCE    
  Integer32 as mscTrkSpdThValue  
  RowStatus as mscTrkSpdThRowStatus  

MscTrkPktBpEntry  
SEQUENCE    
  INTEGER as mscTrkPktBpIndex  
  PassportCounter64 as mscTrkPktBpValue  

MscTrkDiscBpEntry  
SEQUENCE    
  INTEGER as mscTrkDiscBpIndex  
  PassportCounter64 as mscTrkDiscBpValue  

MscTrkOctBpEntry  
SEQUENCE    
  INTEGER as mscTrkOctBpIndex  
  PassportCounter64 as mscTrkOctBpValue  

MscTrkPorsStatsRowStatusEntry  
SEQUENCE    
  RowStatus as mscTrkPorsStatsRowStatus  
  DisplayString as mscTrkPorsStatsComponentName  
  StorageType as mscTrkPorsStatsStorageType  
  NonReplicated as mscTrkPorsStatsIndex  

MscTrkPorsStatsOperEntry  
SEQUENCE    
  PassportCounter64 as mscTrkPorsStatsPorsNormPktFromIf  
  PassportCounter64 as mscTrkPorsStatsPorsNormDiscUnforwardFromIf  
  PassportCounter64 as mscTrkPorsStatsPorsNormOctetFromIf  
  PassportCounter64 as mscTrkPorsStatsPorsIntPktFromIf  
  PassportCounter64 as mscTrkPorsStatsPorsIntDiscUnforwardFromIf  
  PassportCounter64 as mscTrkPorsStatsPorsIntOctetFromIf  

MscTrkPorsStatsPktBpEntry  
SEQUENCE    
  INTEGER as mscTrkPorsStatsPktBpEpIndex  
  INTEGER as mscTrkPorsStatsPktBpDpIndex  
  PassportCounter64 as mscTrkPorsStatsPktBpValue  

MscTrkPorsStatsDiscBpEntry  
SEQUENCE    
  INTEGER as mscTrkPorsStatsDiscBpEpIndex  
  INTEGER as mscTrkPorsStatsDiscBpDpIndex  
  PassportCounter64 as mscTrkPorsStatsDiscBpValue  

MscTrkPorsStatsOctBpEntry  
SEQUENCE    
  INTEGER as mscTrkPorsStatsOctBpEpIndex  
  INTEGER as mscTrkPorsStatsOctBpDpIndex  
  PassportCounter64 as mscTrkPorsStatsOctBpValue  

MscTrkFwdStatsRowStatusEntry  
SEQUENCE    
  RowStatus as mscTrkFwdStatsRowStatus  
  DisplayString as mscTrkFwdStatsComponentName  
  StorageType as mscTrkFwdStatsStorageType  
  NonReplicated as mscTrkFwdStatsIndex  

MscTrkFwdStatsOperEntry  
SEQUENCE    
  PassportCounter64 as mscTrkFwdStatsFwdPktFromIf  
  PassportCounter64 as mscTrkFwdStatsFwdDiscUnforwardFromIf  
  PassportCounter64 as mscTrkFwdStatsFwdOctetFromIf  

MscTrkVnsStatsRowStatusEntry  
SEQUENCE    
  RowStatus as mscTrkVnsStatsRowStatus  
  DisplayString as mscTrkVnsStatsComponentName  
  StorageType as mscTrkVnsStatsStorageType  
  NonReplicated as mscTrkVnsStatsIndex  

MscTrkVnsStatsOperEntry  
SEQUENCE    
  PassportCounter64 as mscTrkVnsStatsVnsPktFromIf  
  PassportCounter64 as mscTrkVnsStatsVnsDiscUnforwardFromIf  
  PassportCounter64 as mscTrkVnsStatsVnsOctetFromIf  

MscTrkVnsStatsPktBpEntry  
SEQUENCE    
  INTEGER as mscTrkVnsStatsPktBpEpIndex  
  INTEGER as mscTrkVnsStatsPktBpDpIndex  
  PassportCounter64 as mscTrkVnsStatsPktBpValue  

MscTrkVnsStatsDiscBpEntry  
SEQUENCE    
  INTEGER as mscTrkVnsStatsDiscBpEpIndex  
  INTEGER as mscTrkVnsStatsDiscBpDpIndex  
  PassportCounter64 as mscTrkVnsStatsDiscBpValue  

MscTrkVnsStatsOctBpEntry  
SEQUENCE    
  INTEGER as mscTrkVnsStatsOctBpEpIndex  
  INTEGER as mscTrkVnsStatsOctBpDpIndex  
  PassportCounter64 as mscTrkVnsStatsOctBpValue  

MscTrkDprsStatsRowStatusEntry  
SEQUENCE    
  RowStatus as mscTrkDprsStatsRowStatus  
  DisplayString as mscTrkDprsStatsComponentName  
  StorageType as mscTrkDprsStatsStorageType  
  NonReplicated as mscTrkDprsStatsIndex  

MscTrkDprsStatsPktBpEntry  
SEQUENCE    
  INTEGER as mscTrkDprsStatsPktBpEpIndex  
  INTEGER as mscTrkDprsStatsPktBpDpIndex  
  PassportCounter64 as mscTrkDprsStatsPktBpValue  

MscTrkDprsStatsDiscBpEntry  
SEQUENCE    
  INTEGER as mscTrkDprsStatsDiscBpEpIndex  
  INTEGER as mscTrkDprsStatsDiscBpDpIndex  
  PassportCounter64 as mscTrkDprsStatsDiscBpValue  

MscTrkDprsStatsOctBpEntry  
SEQUENCE    
  INTEGER as mscTrkDprsStatsOctBpEpIndex  
  INTEGER as mscTrkDprsStatsOctBpDpIndex  
  PassportCounter64 as mscTrkDprsStatsOctBpValue  

MscTrkAddrRowStatusEntry  
SEQUENCE    
  RowStatus as mscTrkAddrRowStatus  
  DisplayString as mscTrkAddrComponentName  
  StorageType as mscTrkAddrStorageType  
  AsciiStringIndex as mscTrkAddrAddressIndex  

MscTrkAddrProvEntry  
SEQUENCE    
  Unsigned32 as mscTrkAddrCost