Olicom-MIB

File: Olicom-MIB.mib (93360 bytes)

Imported modules

RFC-1215 RFC-1212 RFC1155-SMI
RFC1213-MIB

Imported symbols

TRAP-TYPE OBJECT-TYPE enterprises
TimeTicks IpAddress DisplayString

Defined Objects

olicom 1.3.6.1.4.1.285
OBJECT IDENTIFIER    

info 1.3.6.1.4.1.285.1
OBJECT IDENTIFIER    

obmCallback 1.3.6.1.4.1.285.1
This trap is sent when the device tries to place a OBM callback phonecall to phone number obmCallbackPhoneNumber. Even though the call might be repeated several times before a connection is established, only one trap is sent.
TRAP-TYPE    
  obmCallbackPhoneNumber  

infoHardwareProductId 1.3.6.1.4.1.285.1.1
A string containing the hardware product id.
OBJECT-TYPE    
  DisplayString  

infoHardwareVersion 1.3.6.1.4.1.285.1.2
A string containing the hardware version.
OBJECT-TYPE    
  DisplayString  

infoHardwareECOLevel 1.3.6.1.4.1.285.1.3
A string containing the ECO update level.
OBJECT-TYPE    
  DisplayString  

infoHardwareSerialNumber 1.3.6.1.4.1.285.1.4
A string containing the hardware serial number.
OBJECT-TYPE    
  DisplayString  

infoHardwareOptionTable 1.3.6.1.4.1.285.1.5
A sequence of hardware options, each a string describing the appropriate option present.
OBJECT-TYPE    
  SEQUENCE OF  
    InfoHardwareOptionTableEntry

infoHardwareOptionTableEntry 1.3.6.1.4.1.285.1.5.1
OBJECT-TYPE    
  InfoHardwareOptionTableEntry  

infoHardwareOptionNo 1.3.6.1.4.1.285.1.5.1.1
The option number for this option.
OBJECT-TYPE    
  INTEGER  

infoHardwareOption 1.3.6.1.4.1.285.1.5.1.2
A string describing this option.
OBJECT-TYPE    
  DisplayString  

infoSoftwareProductId 1.3.6.1.4.1.285.1.6
A string containing the software product id. Recommended format is as follows: the string consists of fixed and optional part. Fixed part contains device's symbol (eg.'CF8711' for the CrossFire 8711 FE switch). This fixed part cannot contain any whitespace characters. The optional part contains additional description, it must begin with a space character as delimiter.
OBJECT-TYPE    
  DisplayString  

infoSoftwareVersion 1.3.6.1.4.1.285.1.7
A string containing the software version. Recommended format is as follows: the string consists of fixed and optional part. Fixed part contains software version as 4 numbers separated by dot characters (eg. '1.0.0.20'). This fixed part must use only digit and dot characters. The optional part contains additional description, it must begin with a space character as delimiter.
OBJECT-TYPE    
  DisplayString  

infoSoftwareECOLevel 1.3.6.1.4.1.285.1.8
A string containing the ECO update level.
OBJECT-TYPE    
  DisplayString  

infoSoftwareOptionTable 1.3.6.1.4.1.285.1.9
A sequence of software options, each a string describing the appropriate option present.
OBJECT-TYPE    
  SEQUENCE OF  
    InfoSoftwareOptionTableEntry

infoSoftwareOptionTableEntry 1.3.6.1.4.1.285.1.9.1
OBJECT-TYPE    
  InfoSoftwareOptionTableEntry  

infoSoftwareOptionNo 1.3.6.1.4.1.285.1.9.1.1
The option number for this option.
OBJECT-TYPE    
  INTEGER  

infoSoftwareOption 1.3.6.1.4.1.285.1.9.1.2
A string describing this option.
OBJECT-TYPE    
  DisplayString  

infoSoftwareMIBsTable 1.3.6.1.4.1.285.1.10
A sequence of MIBs supported by this device.
OBJECT-TYPE    
  SEQUENCE OF  
    InfoSoftwareMIBsTableEntry

infoSoftwareMIBsTableEntry 1.3.6.1.4.1.285.1.10.1
OBJECT-TYPE    
  InfoSoftwareMIBsTableEntry  

infoSoftwareMIBsNo 1.3.6.1.4.1.285.1.10.1.1
The number for this MIB description entry.
OBJECT-TYPE    
  INTEGER  

infoSoftwareMIBsObjectID 1.3.6.1.4.1.285.1.10.1.2
The unique OBJECT IDENTIFIER for this MIB description entry. Olicom specific MIBs have OBJECT IDENTIFIERs that are defined as { ocmibs N }. (See ocmibs section).
OBJECT-TYPE    
  OBJECT IDENTIFIER  

infoSoftwareMIBsDescription 1.3.6.1.4.1.285.1.10.1.3
A string describing this MIB description entry.
OBJECT-TYPE    
  DisplayString  

infoXtraSwTable 1.3.6.1.4.1.285.1.11
This table contains the product IDs and addtional information for the additional files included in a multichunk file.
OBJECT-TYPE    
  SEQUENCE OF  
    InfoXtraSwEntry

infoXtraSwEntry 1.3.6.1.4.1.285.1.11.1
An entry in the infoXtraSwTable.
OBJECT-TYPE    
  InfoXtraSwEntry  

infoXtraSwIndex 1.3.6.1.4.1.285.1.11.1.1
The entry number in the infoXtraSwTable.
OBJECT-TYPE    
  INTEGER  

infoXtraSwFileUse 1.3.6.1.4.1.285.1.11.1.2
From the file header: The target for the SW image.
OBJECT-TYPE    
  INTEGER  

infoXtraSwProductId 1.3.6.1.4.1.285.1.11.1.3
From the file header: The SW product ID.
OBJECT-TYPE    
  DisplayString  

infoXtraSwVersion 1.3.6.1.4.1.285.1.11.1.4
From the file header: The SW version.
OBJECT-TYPE    
  DisplayString  

infoXtraSwEcoLevel 1.3.6.1.4.1.285.1.11.1.5
From the file header: The SW ECO level.
OBJECT-TYPE    
  DisplayString  

infoXtraSwSerialNumber 1.3.6.1.4.1.285.1.11.1.6
From the file header: The SW serial number.
OBJECT-TYPE    
  DisplayString  

infoXtraSwOptions 1.3.6.1.4.1.285.1.11.1.7
From the file header: A bitmask of SW options.
OBJECT-TYPE    
  OCTET STRING  

infoModuleTable 1.3.6.1.4.1.285.1.12
This table describes all the HW modules in a system with multiple modules.
OBJECT-TYPE    
  SEQUENCE OF  
    InfoModuleEntry

infoModuleEntry 1.3.6.1.4.1.285.1.12.1
A list of information objects for a HW module.
OBJECT-TYPE    
  InfoModuleEntry  

infoModuleIndex 1.3.6.1.4.1.285.1.12.1.1
The module index of this module. This is a unique index identifying a hardware module in the switching system. The planar board of a switch box is considered a module. Any expansion boards (slots) are assigned the subsequent moduleIndexes.
OBJECT-TYPE    
  INTEGER  

infoModuleHwProductId 1.3.6.1.4.1.285.1.12.1.2
A string containing the modules product id (eg. from EEPROM)
OBJECT-TYPE    
  DisplayString  

infoModuleHwVersion 1.3.6.1.4.1.285.1.12.1.3
A string containing the modules version (eg. from EEPROM)
OBJECT-TYPE    
  DisplayString  

infoModuleHwSerialNumber 1.3.6.1.4.1.285.1.12.1.4
A string containing the modules serial no (eg. from EEPROM)
OBJECT-TYPE    
  DisplayString  

infoModuleBootpromVersion 1.3.6.1.4.1.285.1.12.1.5
A string containing the modules bootprom version. An empty string, if no bootprom is present on this module.
OBJECT-TYPE    
  DisplayString  

infoSwImageTable 1.3.6.1.4.1.285.1.13
This table describes all the SW images in the system.
OBJECT-TYPE    
  SEQUENCE OF  
    InfoSwImageEntry

infoSwImageEntry 1.3.6.1.4.1.285.1.13.1
A list of information objects for SW image.
OBJECT-TYPE    
  InfoSwImageEntry  

infoSwImageModuleIndex 1.3.6.1.4.1.285.1.13.1.1
The module index of the module on which the SW image reside.
OBJECT-TYPE    
  INTEGER  

infoSwImageNo 1.3.6.1.4.1.285.1.13.1.2
The SW image number, relative to the HW module.
OBJECT-TYPE    
  INTEGER  

infoSwImageProductId 1.3.6.1.4.1.285.1.13.1.3
A string containing the SW images product id. An empty string, if this image is not present or corrupted.
OBJECT-TYPE    
  DisplayString  

infoSwImageVersion 1.3.6.1.4.1.285.1.13.1.4
A string containing the SW images version. An empty string, if this image is not present or corrupted.
OBJECT-TYPE    
  DisplayString  

infoSwImageDownloadTime 1.3.6.1.4.1.285.1.13.1.5
The time when the software image was downloaded to the device. This is measured in seconds since 00:00:00 on 1 January 1970 (i.e. UNIX standard time).
OBJECT-TYPE    
  INTEGER  

ocmibs 1.3.6.1.4.1.285.2
OBJECT IDENTIFIER    

obmCallout 1.3.6.1.4.1.285.2
This trap is sent when the device tries to place a OBM callout phonecall to phone number obmCalloutPhoneNumber because it was triggered by the event(s) obmCalloutTriggerEvent. Even though the call might be repeated several times before a connection is established, only one trap is sent.
TRAP-TYPE    
  obmCalloutPhoneNumber  
  obmCalloutTriggerEvent  

ocmibsBridgeMIB 1.3.6.1.4.1.285.2.1
OBJECT IDENTIFIER    

ocmibsCauMIB 1.3.6.1.4.1.285.2.2
OBJECT IDENTIFIER    

ocmibsCamMIB 1.3.6.1.4.1.285.2.3
OBJECT IDENTIFIER    

ocmibsEhubMIB 1.3.6.1.4.1.285.2.4
OBJECT IDENTIFIER    

ocmibsOc8100MIB 1.3.6.1.4.1.285.2.5
OBJECT IDENTIFIER    

ocmibsCrossfireAtmMIB 1.3.6.1.4.1.285.2.6
OBJECT IDENTIFIER    

ocmibsOc8200MIB 1.3.6.1.4.1.285.2.7
OBJECT IDENTIFIER    

ocmibsOc8600MIB 1.3.6.1.4.1.285.2.8
OBJECT IDENTIFIER    

ocmibsOc84x0MIB 1.3.6.1.4.1.285.2.9
OBJECT IDENTIFIER    

ocmibsLanSwitchMIB 1.3.6.1.4.1.285.2.10
OBJECT IDENTIFIER    

ocmibsVlanMIB 1.3.6.1.4.1.285.2.11
OBJECT IDENTIFIER    

ocmibsSmartStatusMIB 1.3.6.1.4.1.285.2.12
OBJECT IDENTIFIER    

ocmibsCf871xMIB 1.3.6.1.4.1.285.2.13
OBJECT IDENTIFIER    

atmUplinkMIB 1.3.6.1.4.1.285.2.14
OBJECT IDENTIFIER    

temporary 1.3.6.1.4.1.285.3
OBJECT IDENTIFIER    

lmpMib 1.3.6.1.4.1.285.3.1
OBJECT IDENTIFIER    

inet 1.3.6.1.4.1.285.4
OBJECT IDENTIFIER    

inetMacAddrForm 1.3.6.1.4.1.285.4.1
This variable controls in which form MAC addresses will be represented. The default is canonical form for ethernet products and non-cannonical for tokenring products. Setting this variable controls the representation for syntax's: PhysAddress, MacAddress and MacAddressString. Setting this variable will enforce a reboot.
OBJECT-TYPE    
  INTEGER canonical(1), non-canonical(2)  

inetEnableRwho 1.3.6.1.4.1.285.4.2
This variable controls whether the device will send rhwo packets on UDP port 513. The packets include information about pseudo-users logged in. For the Olicom Bridge products, these are: Olicom Bridge Manager (user: obrimg) or the (IBM) Lan Network Manager (users: control, altern, observ). The tty information describes the management link. If this object it disabled, it overrides the value of inetIPAddressEnableRwho.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

inetEnableRIP 1.3.6.1.4.1.285.4.3
This variable control whether the device will process RIP (Routing Information Protocol) packets on UDP port 520 to update the IP routing table. The device will not announce any routes, it will only participate as a passive host. Refer to Unix documentation of either routed or gated daemons, or Internet RFC document 1058. If this object it disabled, it overrides the value of inetIPAddressEnableRIP.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

inetCommunityMaxEntries 1.3.6.1.4.1.285.4.4
The maximum number of community entries allowed in inetCommunityTable.
OBJECT-TYPE    
  INTEGER  

inetCommunityTable 1.3.6.1.4.1.285.4.5
A list of entries for each community which is authorized to access the agent. The maximum number of entries is given by inetCommunityMaxEntries.
OBJECT-TYPE    
  SEQUENCE OF  
    InetCommunityTableEntry

inetCommunityTableEntry 1.3.6.1.4.1.285.4.5.1
A community entry containing objects pertaining to a network manager which is authorized to access the agent.
OBJECT-TYPE    
  InetCommunityTableEntry  

inetCommunityNo 1.3.6.1.4.1.285.4.5.1.1
The entry number in the community table for this community.
OBJECT-TYPE    
  INTEGER  

inetCommunityName 1.3.6.1.4.1.285.4.5.1.2
The community name used by the management station to access the agent. An empty community name means that any request regardless of it's community name will be accepted.
OBJECT-TYPE    
  DisplayString  

inetCommunityIPAddress 1.3.6.1.4.1.285.4.5.1.3
The IP address of the management station authorized to access the agent. A value of 0.0.0.0 allows every IP node to use the community name.
OBJECT-TYPE    
  IpAddress  

inetCommunityAccess 1.3.6.1.4.1.285.4.5.1.4
Controls the access rights of the management station.
OBJECT-TYPE    
  INTEGER readOnly(1), readWrite(2)  

inetCommunityDelete 1.3.6.1.4.1.285.4.5.1.5
Setting this object to a non zero value, deletes the entry for this community entry.
OBJECT-TYPE    
  INTEGER  

inetCommunityIPXAddress 1.3.6.1.4.1.285.4.5.1.6
The IPX address of the management station authorized to access the agent. A value of all zeroes allows every IPX node to use the community name.
OBJECT-TYPE    
  IPXAddress  

inetCommunityTransportProtocols 1.3.6.1.4.1.285.4.5.1.7
This variable defines which transport protocols should be expected to deliver requests for this community. If the bit-value 0x01 is set, UDP/IP is used and the inetCommunityIPAddress variable contains the source address. If the bit-value 0x02 is set, IPX is used and the inetCommunityIPXAddress variable will be used. If the bit-value 0x04 is set, MAC is used and the inetCommunityMACAddress varial will be used. All three bit-values can be set, in which case all source addresses will be allowed.
OBJECT-TYPE    
  INTEGER  

inetCommunityMACAddress 1.3.6.1.4.1.285.4.5.1.8
The MAC address of the management station authorized to access the agent. A value of 000000000000 allows every MAC node to use the community name.
OBJECT-TYPE    
  MacAddress  

inetTrapMaxEntries 1.3.6.1.4.1.285.4.6
The maximum number of network manager entries allowed in inetTrapTable.
OBJECT-TYPE    
  INTEGER  

inetTrapTable 1.3.6.1.4.1.285.4.7
A list of trap entries for each network manager which receives traps from the agent. The maximum number of entries is given by trapMaxEntries.
OBJECT-TYPE    
  SEQUENCE OF  
    InetTrapTableEntry

inetTrapTableEntry 1.3.6.1.4.1.285.4.7.1
A trap entry containing objects pertaining to a network manager which receives traps from the agent.
OBJECT-TYPE    
  InetTrapTableEntry  

inetTrapCommunity 1.3.6.1.4.1.285.4.7.1.1
The community name used in traps sent to the management station.
OBJECT-TYPE    
  DisplayString  

inetTrapDestIPAddress 1.3.6.1.4.1.285.4.7.1.2
The IP address of the management station to receive traps. Note a value of zero or resetting inetTrapTransportProtocols bit value 0x01 disables IP based traps from the entry However inetTrapDelete should be used to delete entries as it resets all parameters to default settings.
OBJECT-TYPE    
  IpAddress  

inetTrapEventDisableMask 1.3.6.1.4.1.285.4.7.1.3
NOTE: This field has been replaced by the controlTrapTable. Bitmask of disabled traps from product-specific network management agents. Each octet within the value of this object specifies a set of eight traps, with the first octet specifying traps 1 through 8, the second octet specifying traps 9 through 16, etc. Within each octet, the least significant bit represents the lowest numbered trap, and the most significant bit represents the highest numbered trap. Thus, each trap of the device is represented by a single bit within the value of this object. If that bit has a value of `0' then that trap is included in the set of traps; the trap is not included if its bit has a value of `1'. The bits corresponds to the TRAP numbers found in the the product specific MIBs.
OBJECT-TYPE    
  OCTET STRING  

inetTrapDelete 1.3.6.1.4.1.285.4.7.1.4
Setting this object to a non-zero value, deletes the entry for the trap destination.
OBJECT-TYPE    
  INTEGER  

inetTrapDestUDPPort 1.3.6.1.4.1.285.4.7.1.5
The UDP port on the management station to receive traps. If set to 0 (zero) the default value 162 is used.
OBJECT-TYPE    
  INTEGER 1..65536  

inetTrapIndex 1.3.6.1.4.1.285.4.7.1.6
All entries in the inetTrapTable have a unique index, denoted by this variable.
OBJECT-TYPE    
  INTEGER  

inetTrapDestIPXAddress 1.3.6.1.4.1.285.4.7.1.7
The IPX address of the management station to receive traps. Note a value of zero or resetting inetTrapTransportProtocols bit value 0x02 disables IPX based traps from the entry However inetTrapDelete should be used to delete entries as it resets all parameters to default settings.
OBJECT-TYPE    
  IPXAddress  

inetTrapTransportProtocols 1.3.6.1.4.1.285.4.7.1.8
This variable defines which transport protocols should be used to deliver TRAPs for this trap destination. If the bit-value 0x01 is set, UDP/IP is use and the inetTrapDestIPAddress variable contains the destination address (together with the inetTrapDestUDPPort variable), and if the bit-value 0x02 is set, IPX is used and the inetTrapDestIPXAddress variable will be used. Both bit-values can be set, in which case the traps will be set to both destinations.
OBJECT-TYPE    
  INTEGER  

inetTrapIPEncapsulation 1.3.6.1.4.1.285.4.7.1.9
This variable controls the encapsulation method used when delivering TRAPs via the UDP/IP protocol. NOTE: On TokenRing devices only snap(3) works. ON EtherNet devices only ethernet(1) and snap(3) works.
OBJECT-TYPE    
  INTEGER ethernet(1), ieee8022(2), snap(3)  

inetTrapIPXEncapsulation 1.3.6.1.4.1.285.4.7.1.10
This variable controls the encapsulation method used when delivering TRAPs via the IPX protocol. NOTE: On TokenRing devices only ieee8022(2) and snap(3) works.
OBJECT-TYPE    
  INTEGER ethernet(1), ieee8022(2), snap(3)  

inetDefaultIPEncapsulation 1.3.6.1.4.1.285.4.8
This variable controls the default encapsulation method used by this device, when transmitting via the UDP/IP protocol. This default encapsulation method is only used when there is no other way to know which encapsulation method the receiving host understands. NOTE: On TokenRing devices only snap(3) works. ON EtherNet devices only ethernet(1) and snap(3) works.
OBJECT-TYPE    
  INTEGER ethernet(1), ieee8022(2), snap(3)  

inetDefaultIPXEncapsulation 1.3.6.1.4.1.285.4.9
This variable controls the default encapsulation method used by this device, when transmitting via the IPX protocol. This default encapsulation method is only used when there is no other way to know which encapsulation method the receiving host understands. NOTE: On TokenRing devices only ieee8022(2) and snap(3) works.
OBJECT-TYPE    
  INTEGER ethernet(1), ieee8022(2), snap(3)  

inetIPAddressTable 1.3.6.1.4.1.285.4.10
This table contains IP addressing information for each interface.
OBJECT-TYPE    
  SEQUENCE OF  
    InetIPAddressEntry

inetIPAddressEntry 1.3.6.1.4.1.285.4.10.1
OBJECT-TYPE    
  InetIPAddressEntry  

inetIPAddressIfNumber 1.3.6.1.4.1.285.4.10.1.1
This number corresponds to the interface number, ifIndex, in ifTable from MIB-II.
OBJECT-TYPE    
  INTEGER  

inetIPAddressIPAddress 1.3.6.1.4.1.285.4.10.1.2
This is the IP address associated with the interface.
OBJECT-TYPE    
  IpAddress  

inetIPAddressNetmask 1.3.6.1.4.1.285.4.10.1.3
This is the IP netmask associated with the interface. Note: Setting the netmask for one interface may change the netmask for other interfaces.
OBJECT-TYPE    
  IpAddress  

inetIPAddressDefaultGateway 1.3.6.1.4.1.285.4.10.1.4
This is the IP default gateway associated with the interface. Note: Setting the default gateway for one interface may change the default gateway for other interfaces.
OBJECT-TYPE    
  IpAddress  

inetIPAddressEnableRwho 1.3.6.1.4.1.285.4.10.1.5
This variable controls whether the device will send rhwo packets on UDP port 513 on the specified interface. The packets include information about pseudo-users logged in. This object has effect only if inetEnableRwho has the value 'enabled'.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

inetIPAddressEnableRIP 1.3.6.1.4.1.285.4.10.1.6
This variable control whether the device will process RIP (Routing Information Protocol) packets on UDP port 520 on the specified interface to update the IP routing table. The device will not announce any routes, it will only participate as a passive host. Refer to Unix documentation of either routed or gated daemons, or Internet RFC document 1058. This object has effect only if inetEnableRIP has the value 'enabled'.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

inetIPAddressIPEncapsulation 1.3.6.1.4.1.285.4.10.1.7
This variable controls the IP encapsulation method used on the specified interface. Choosing media-default(4) selects SNAP encapsulation on TokenRing interfaces and Ethernet encapsulation on Ethernet interfaces. NOTE: On TokenRing interfaces only snap(3) and media-default(4) works.
OBJECT-TYPE    
  INTEGER ethernet(1), snap(3), media-default(4)  

inetSlipBaudrate 1.3.6.1.4.1.285.4.11
The baud rate used by a SLIP connection.
OBJECT-TYPE    
  INTEGER b1200(1), b2400(2), b4800(3), b9600(4), b19200(5), b38400(6)  

inetSlipParity 1.3.6.1.4.1.285.4.12
The transmission parity used by a SLIP connection.
OBJECT-TYPE    
  INTEGER none(1), even(2), odd(3)  

inetSlipStopbits 1.3.6.1.4.1.285.4.13
The number of stop bits used by a SLIP connection.
OBJECT-TYPE    
  INTEGER one(1), two(2)  

inetSlipModemInit 1.3.6.1.4.1.285.4.14
A string sent to the modem to initialize it prior to establishing a SLIP connection.
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

inetSlipHeaderCompressionEnabled 1.3.6.1.4.1.285.4.15
Enable or disable compression of the SLIP headers.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

inetSlipMaxMtuSize 1.3.6.1.4.1.285.4.16
Maximum Transmit Unit size, that is, the maximum size of a PDU transmitted on a SLIP connection.
OBJECT-TYPE    
  INTEGER  

inetSlipMaxMruSize 1.3.6.1.4.1.285.4.17
Maximum Receive Unit size, that is, the maximum acceptable size of a PDU received on a SLIP connection.
OBJECT-TYPE    
  INTEGER  

sCallbackEnable 1.3.6.1.4.1.285.4.18
This object controls whether the Olicom Out-Of-Band Management Callback sub-system should be active (enabled) or not.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

sCallbackPhoneNumber 1.3.6.1.4.1.285.4.19
A string containing the telephone number to be used by the callback sub-system. This string will be sent `as is' to the modem connected to the OBM communication port.
OBJECT-TYPE    
  DisplayString SIZE(0..30)  

sCalloutEnable 1.3.6.1.4.1.285.4.20
This object controls whether the Olicom Out-Of-Band Management Callout sub-system should be active (enabled) or not.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

sCalloutPhoneNumber 1.3.6.1.4.1.285.4.21
A string containing the telephone number to be used by the callout sub-system. This string will be sent `as is' to the modem connected to the OBM communication port.
OBJECT-TYPE    
  DisplayString SIZE(0..30)  

control 1.3.6.1.4.1.285.5
OBJECT IDENTIFIER    

controlRestart 1.3.6.1.4.1.285.5.1
Writing any value other than zero to this variable causes the device program to restart.
OBJECT-TYPE    
  INTEGER  

controlConfigChangeCounter 1.3.6.1.4.1.285.5.2
This variable contains the number of times, any part of the configuration has been changed by any of the management systems controlling this device. See the managementTable.
OBJECT-TYPE    
  INTEGER  

controlTrapTable 1.3.6.1.4.1.285.5.3
This table contains an entry for each enterprise-specific TRAP this device is capable of sending. The only writable field in the table is the controlTrapGeneration field, which controls the generation is that particular TRAP. All other fields are used as indices.
OBJECT-TYPE    
  SEQUENCE OF  
    ControlTrapTableEntry

controlTrapTableEntry 1.3.6.1.4.1.285.5.3.1
A controlTrapTableEntry entry contains objects pertaining to one particular enterprise-specific TRAP.
OBJECT-TYPE    
  ControlTrapTableEntry  

controlTrapIndex 1.3.6.1.4.1.285.5.3.1.1
This variable corresponds to the inetTrapIndex variable in the inetTrapTable.
OBJECT-TYPE    
  INTEGER  

controlTrapMIBIndex 1.3.6.1.4.1.285.5.3.1.2
This variable identifies the MIB in which this TRAP is defined. The variable is the index of the entry in infoSoftwareMIBsTable that defines the MIB in question.
OBJECT-TYPE    
  INTEGER  

controlTrapNumber 1.3.6.1.4.1.285.5.3.1.3
This variable describes in which TRAP in the MIB subtree this TRAP is.
OBJECT-TYPE    
  INTEGER  

controlTrapDescription 1.3.6.1.4.1.285.5.3.1.4
This variable describes the TRAP. This corresponds to the description field in the MIB text for this TRAP.
OBJECT-TYPE    
  DisplayString  

controlTrapGeneration 1.3.6.1.4.1.285.5.3.1.5
This variable controls whether this TRAP never(1) is generated or is always(2) generated.
OBJECT-TYPE    
  INTEGER never(1), always(2)  

controlLoadProtocol 1.3.6.1.4.1.285.5.4
This variable defines which protocol should be used for downloading configuration and program code. Notice that a specific Olicom product will typically support only one or two of the listed protocols.
OBJECT-TYPE    
  INTEGER ibm-rpl(1), ibm-hlm(2), bootp-tftp(3), olicom-rpl(4), olicom-remote-software-update(5)  

controlLoadFilename 1.3.6.1.4.1.285.5.5
In the Load protocols where it is relevant this variable contains the name of the file to be downloaded.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

controlLoadServerMACAddress 1.3.6.1.4.1.285.5.6
This object specifies the MAC address of the Load server used for download. Only used if the Load protocol defined by the controlLoadProtocol variable needs the MAC address of the an Load server.
OBJECT-TYPE    
  MacAddress  

controlLoadServerIPAddress 1.3.6.1.4.1.285.5.7
This object specifies the IP address of the Load server used for download. Only used if the Load protocol defined by the controlLoadProtocol variable needs the IP address of the an Load server.
OBJECT-TYPE    
  IpAddress  

controlLoadServerIPXAddress 1.3.6.1.4.1.285.5.8
This object specifies the IPX address of the Load server used for download. Only used if the Load protocol defined by the controlLoadProtocol variable needs the IPX address of the an Load server.
OBJECT-TYPE    
  IPXAddress  

controlLoadStart 1.3.6.1.4.1.285.5.9
Writing any value other than zero to this variable causes a download to start. While reading, it returns the current status of transmission or last transmission result.
OBJECT-TYPE    
  INTEGER notInitiated(1), starting(2), inProgress(3), finishing(4), completed(5), protocolFailure(6), flashFailure(7), badFile(8)  

controlTime 1.3.6.1.4.1.285.5.10
The internal clock in the device. This is measured in seconds since 00:00:00 on 1 January 1970 (i.e. UNIX standard time).
OBJECT-TYPE    
  INTEGER  

controlEnableRmon 1.3.6.1.4.1.285.5.11
This object specifies whether RMON probe is enabled or disabled. If the device does not support RMON only disabled is allowed. Setting this variable resets the CAU.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

controlAutoRestart 1.3.6.1.4.1.285.5.12
This object specifies whether changes to certain fundamental configuration parameters (as specified for the corresponding MIB variables) shall cause the device to restart automatically. The auto restart functionality is always enabled after restarting the bridge. NOTICE: In general, disabling this functionality is not recommended, since some changes may cause the device to behave erratically (which may be the reason why the device has to restart). However, for the initial configuration of the device (i.e. before it is operational, it is usually safe to postpone restarting the device until all configuration changes have been made.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

controlSwAdminStatus 1.3.6.1.4.1.285.5.13
This object controls the state of the SW images in systems where more than one image is present. In the OC-9100 the state of each image may be: empty(1) - no image is present, future1(2) - the image may be used later, futureTest(3) - the image will be used once on the next restart, future2(4) - the image may be used later, current1(5) - the image is in use now, past(6) - the image was previously used, current2(7) - the image is in use now, checksumError(8) - the image is faulty, erased(9) - the image has been erased. Because this information is stored in flash each state cannot be used arbitrarily. For example, the future state can only be used twice, namely as state future1 and future2. Normally, the state of a SW image progresses through numerically increasing states. In the OC-8500 and OC-8700 series the status word is stored in BBS RAM. This releases the constraints to the sequence of states, thus only a subset of the above is needed: empty(1) - no image is present, future1(2) - the image may be used later, futureTest(3) - the image will be used once on the next restart, current1(5) - the image is in use now, past(6) - the image was previously used, checksumError(8) - the image is faulty, erased(9) - the image has been erased. The value actually stored in this object is state1*256+state2, where state1 and state2 are the values of the two SW image states. Note that a number of combinations are illegal. For example, the value 6*256+6 (indicating two 'past' images) may not be written.
OBJECT-TYPE    
  INTEGER  

controlFlashConfigSize 1.3.6.1.4.1.285.5.15
The total number of bytes in the configuration FLASH, or rather, in one of the two alternating sections.
OBJECT-TYPE    
  INTEGER  

controlFlashConfigFree 1.3.6.1.4.1.285.5.16
The number of free bytes in the configuration FLASH.
OBJECT-TYPE    
  INTEGER  

controlFlashConfigState 1.3.6.1.4.1.285.5.17
Controls the state of the FLASH configuration. The states are as follows: normal default - The DEFAULT button has been activated. corrupted - The FLASH configuration has been corrupted, default configuration is used. temporary - A temporary update to the configuration has been initiated. testTemporary - A restart has been performed after a 'temporary' update. acceptTemporary - Setting this value in state 'temporary' or 'testTemporary' will force the state to 'normal' and will cause the configuration to be accepted. rejectTemporary - Setting this value in state 'temporary' or 'testTemporary' will cause the temporary configuration update to be aborted. rewrite - Setting this value will cause the FLASH to be rewritten, resulting in maximum free FLASH.
OBJECT-TYPE    
  INTEGER normal(1), default(2), corrupted(3), temporary(4), testTemporary(5), acceptTemporary(6), rejectTemporary(7), rewrite(8)  

controlDelayedRestart 1.3.6.1.4.1.285.5.18
Writing value n to this variable will cause device to restart after n seconds. Writing zero cancels the reboot. Writing new value when the reboot is already scheduled cancels previously scheduled action and schedules new reboot. While reading this variable shows time remaining to the reboot (0 if reboot is not scheduled).
OBJECT-TYPE    
  INTEGER  

controlLoadProggress 1.3.6.1.4.1.285.5.19
Number of bytes transmitted so far. 0 if no transmission is currently in progress.
OBJECT-TYPE    
  INTEGER  

controlLoadFileSize 1.3.6.1.4.1.285.5.20
Length of the file being transmitted. 0 if no transmission is currently in progress or if the size is unknown.
OBJECT-TYPE    
  INTEGER  

controlTftpClient 1.3.6.1.4.1.285.5.21
OBJECT IDENTIFIER    

controlTftpMaxSessions 1.3.6.1.4.1.285.5.21.1
The maximum number of simultaneous sessions this device is able to handle.
OBJECT-TYPE    
  INTEGER  

controlTftpNextSessionIndex 1.3.6.1.4.1.285.5.21.2
The unique identifier of the next free TFTP session. This index should be used for manipulating rows in controlTftpSessionTable.
OBJECT-TYPE    
  INTEGER  

controlTftpSessionTable 1.3.6.1.4.1.285.5.21.3
This table makes it possible to control TFTP sessions performed by the built-in device TFTP client.
OBJECT-TYPE    
  SEQUENCE OF  
    ControlTftpSessionEntry

controlTftpSessionEntry 1.3.6.1.4.1.285.5.21.3.1
A list of configuration objects for the TFTP session.
OBJECT-TYPE    
  ControlTftpSessionEntry  

controlTftpSessionIndex 1.3.6.1.4.1.285.5.21.3.1.1
The TFTP session index.
OBJECT-TYPE    
  INTEGER  

controlTftpSessionRowStatus 1.3.6.1.4.1.285.5.21.3.1.2
The status of this TFTP session entry. The following values are possible: 'active' - TFTP operation is in progress. Setting this object to this value starts the transmission. 'notInService' - The row is created but there is no TFTP transfer in progress. 'createAndWait' - the only way to create the session. If the operation is successful the status of the row should be 'notInService'. 'destroy' - destroys the row and frees the resources. This operation will fail when the row is 'active'. 'createAndGo' is illegal. Setting this object to this value will fail. 'notReady' is not used for this variable.
OBJECT-TYPE    
  RowStatus  

controlTftpSessionDirection 1.3.6.1.4.1.285.5.21.3.1.3
The direction of this session's transfer.
OBJECT-TYPE    
  INTEGER download(1), upload(2)  

controlTftpSessionServerAddress 1.3.6.1.4.1.285.5.21.3.1.4
The IP address of the TFTP server used for the transmission.
OBJECT-TYPE    
  IpAddress  

controlTftpSessionServerFile 1.3.6.1.4.1.285.5.21.3.1.5
The name of the transferred file on the server side.
OBJECT-TYPE    
  DisplayString  

controlTftpSessionLocalFile 1.3.6.1.4.1.285.5.21.3.1.6
The name of the transferred file on the switch side. In case of upload switch may ignore this variable.
OBJECT-TYPE    
  DisplayString  

controlTftpSessionStatus 1.3.6.1.4.1.285.5.21.3.1.7
The status of the session or transmission result when the session was completed. The following values are possible: notInitiated(1) no transfer since this row creation starting(2) inProgress(3) finishing(4) completed(5) last transfer was completed successfully protocolFailure(6) transmission failed (e.g. TFTP error) flashFailure(7) writing to the flash failed badFile(8) the file transmitted was corrupted The download/upload cycle doesn't have to go through all of the states listed above.
OBJECT-TYPE    
  INTEGER notInitiated(1), starting(2), inProgress(3), finishing(4), completed(5), protocolFailure(6), flashFailure(7), badFile(8)  

controlTftpSessionProgress 1.3.6.1.4.1.285.5.21.3.1.8
Number of bytes transmitted so far. 0 if no transmission is currently in progress.
OBJECT-TYPE    
  INTEGER  

controlTftpSessionFileSize 1.3.6.1.4.1.285.5.21.3.1.9
Length of the file being transmitted. 0 if no transmission is currently in progress or if the size is unknown.
OBJECT-TYPE    
  INTEGER  

controlRestartType 1.3.6.1.4.1.285.5.22
The type of restart that will be performed after next reboot request. After any kind of reboot the value of this object should be soft(1) regardles of the previous value.
OBJECT-TYPE    
  INTEGER soft(1), default(2)  

obm 1.3.6.1.4.1.285.6
OBJECT IDENTIFIER    

obmEnable 1.3.6.1.4.1.285.6.1
This object controls whether the Olicom Out-Of-Band Management system should be active (enabled) or not.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

obmPassword 1.3.6.1.4.1.285.6.2
A string containing the password needed to access the device through the OBM communication port. NOTE: Reading the password will return the string `********' - an attempt to set the password to that value will not modify the password.
OBJECT-TYPE    
  DisplayString SIZE(0..7)  

obmBaudrate 1.3.6.1.4.1.285.6.3
This object controls the baudrate of the communication port used by the Out-of-Band Management system. The 'auto' means automatic UART speed sensing.
OBJECT-TYPE    
  INTEGER b1200(1), b2400(2), b4800(3), b9600(4), b19200(5), b38400(6), b57600(7), b115200(8), b230400(9), b460800(10), b921600(11), auto(12)  

obmParity 1.3.6.1.4.1.285.6.4
This object controls the parity of the communication port used by the Out-of-Band Management system.
OBJECT-TYPE    
  INTEGER none(1), even(2), odd(3)  

obmStopbits 1.3.6.1.4.1.285.6.5
This object controls the number of stopbits of the communication port used by the Out-of-Band Management system.
OBJECT-TYPE    
  INTEGER one(1), two(2)  

obmModemInit 1.3.6.1.4.1.285.6.6
A string containing the initialization string used to initialize the modem connected to the OBM communication port. This string will be sent `as is'.
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

obmCallbackEnable 1.3.6.1.4.1.285.6.7
This object controls whether the Olicom Out-Of-Band Management Callback sub-system should be active (enabled) or not.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

obmCallbackPhoneNumber 1.3.6.1.4.1.285.6.8
A string containing the default phone number to be used by the callback sub-system. This string will be sent `as is' to the modem connected to the OBM communication port.
OBJECT-TYPE    
  DisplayString SIZE(0..30)  

obmCalloutEnable 1.3.6.1.4.1.285.6.9
This object controls whether the Olicom Out-Of-Band Management Callout sub-system should be active (enabled) or not.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

obmCalloutPhoneNumber 1.3.6.1.4.1.285.6.10
A string containing the telephone number to be used by the callout sub-system. This string will be sent `as is' to the modem connected to the OBM communication port.
OBJECT-TYPE    
  DisplayString SIZE(0..30)  

obmCalloutTriggerEvent 1.3.6.1.4.1.285.6.11
This object controls which events will trigger the callout sub-system to try to establish a connection using the obmCalloutPhoneNumber. The value is a bitmask, representing the following possibilities: 0x01 : Fatal Error. (CAU/CAM/BRIDGE) 0x02 : Adapter Failure. (CAU) 0x02 : Start-up Failure. (BRIDGE) 0x04 : Fan Failure. (SWI) 0x04 : LAM Failure. (CAU/CAM) 0x08 : Main ring Wrap due to beacon. (CAU) 0x10 : HLM Connection Lost. (CAU/CAM) 0x10 : Temperature warning (SWI) 0x20 : Power System Failure (CAU) 0x40 : WAN link failure (BRIDGE) 0x40 : Port auto disabled (SWI)
OBJECT-TYPE    
  OCTET STRING  

obmCalloutRetries 1.3.6.1.4.1.285.6.12
This value denotes the number of times the callout sub-system will try to establish a connection using the obmCallbackPhoneNumber string. Used also for call-back.
OBJECT-TYPE    
  INTEGER 0..255  

obmCalloutRetryTimer 1.3.6.1.4.1.285.6.13
This value denotes the number of minutes between unsuccesful attempts to establish a connection using the obmCalloutPhoneNumber string. Used also for call-back.
OBJECT-TYPE    
  INTEGER 0..255  

obmDelayedRecovery 1.3.6.1.4.1.285.6.14
This object controls whether the Olicom Out-Of-Band Management delayed Recovery sub-system should be active (enabled) or not. On a bridge this is controlled by the configRestartOnError variable.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

obmEnableTelnet 1.3.6.1.4.1.285.6.15
This object controls whether the Olicom Out-Of-Band Management can be accessed from telnet.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

obmConnectTimeout 1.3.6.1.4.1.285.6.16
This value denotes the number of seconds the user must wait after 3 unsuccesfull attempts to enter the correct password. The default value is 60 sec.
OBJECT-TYPE    
  INTEGER 0..255  

obmDefaultOperationalMode 1.3.6.1.4.1.285.6.17
This object controls whether the Olicom Out-Of-Band Management can be accessed via serial console or async PPP/SLIP or selected dynamically (serial or async PPP/SLIP) based on the incoming data type.
OBJECT-TYPE    
  INTEGER autoSense(1), serialConsole(2), asyncPPP(3)  

obmInactivityTimeout 1.3.6.1.4.1.285.6.18
This object controls value of inactivity timeout [min] which will be used to disconnect an idle user from the Out-of-Band Management system. The default value is 3 min. Value 0 disables this feature (infinite timeout)
OBJECT-TYPE    
  INTEGER 0..255  

obmDialType 1.3.6.1.4.1.285.6.19
This object controls if ATDP or ATDT will be sent to a modem while dialing from the Out-of-Band Management system.
OBJECT-TYPE    
  INTEGER pulse(1), tone(2)  

obmPasswordRead 1.3.6.1.4.1.285.6.20
A string containing the password needed to read-access the device through the OBM communication port. NOTE: Reading the password will return the string `********' - an attempt to set the password to that value will not modify the password.
OBJECT-TYPE    
  DisplayString SIZE(0..7)  

obmXonXoffHandshake 1.3.6.1.4.1.285.6.21
The status of Xon/Xoff flow control.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

obmRtsCtsHandshake 1.3.6.1.4.1.285.6.22
The status of RTS/CTS handshake.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

obmDatabits 1.3.6.1.4.1.285.6.23
Number of databits to be used by serial interface.
OBJECT-TYPE    
  INTEGER  

management 1.3.6.1.4.1.285.7
OBJECT IDENTIFIER    

managementTable 1.3.6.1.4.1.285.7.1
A list of entries for each management system the device supports. NOTE: The SNMP management system is always the first entry in the table.
OBJECT-TYPE    
  SEQUENCE OF  
    ManagementTableEntry

managementTableEntry 1.3.6.1.4.1.285.7.1.1
A management entry contains objects pertaining to a network management system which is supported by this device.
OBJECT-TYPE    
  ManagementTableEntry  

managementNo 1.3.6.1.4.1.285.7.1.1.1
The entry number in the management table for this management system.
OBJECT-TYPE    
  INTEGER  

managementDescription 1.3.6.1.4.1.285.7.1.1.2
A descriptive text for this management system (protocol).
OBJECT-TYPE    
  DisplayString  

managementAssociationState 1.3.6.1.4.1.285.7.1.1.3
This variable describes the current association between this device and this management system. Some systems are association oriented (e.g. CMIP) and can therefore have state associated(1) or not-associated(2), while other management systems are request/reply oriented (e.g. SNMP) and therefore always have the state na-association(3).
OBJECT-TYPE    
  INTEGER associated(1), not-associated(2), na-association(3)  

managementPriority 1.3.6.1.4.1.285.7.1.1.4
This variable describes the relative priority of the management systems supported by this device. The associated management system with the highest managementPriority value (numerically) will be the ONLY system with write access to all management variables.
OBJECT-TYPE    
  INTEGER  

managementSnmpAccessLogTable 1.3.6.1.4.1.285.7.2
This table contains the history log for the last 10 SNMP managers which have accessed this device.
OBJECT-TYPE    
  SEQUENCE OF  
    ManagementSnmpAccessLogEntry

managementSnmpAccessLogEntry 1.3.6.1.4.1.285.7.2.1
An entry in the managementSnmpAccessLogTable.
OBJECT-TYPE    
  ManagementSnmpAccessLogEntry  

managementSnmpAccessLogIndex 1.3.6.1.4.1.285.7.2.1.1
The number of this entry in the managementSnmpAccessLogTable.
OBJECT-TYPE    
  INTEGER 1..10  

managementSnmpAccessLogTimeStamp 1.3.6.1.4.1.285.7.2.1.2
The time at which the SNMP manager last accessed this device.
OBJECT-TYPE    
  TimeTicks  

managementSnmpAccessLogIpAddress 1.3.6.1.4.1.285.7.2.1.3
The IP Address of the SNMP manager.
OBJECT-TYPE    
  IpAddress  

managementSnmpAccessLogAccessRights 1.3.6.1.4.1.285.7.2.1.4
Specifies the access rights of the SNMP manager.
OBJECT-TYPE    
  INTEGER readOnly(1), readWrite(2)  

managementSnmpAccessLogCount 1.3.6.1.4.1.285.7.2.1.5
Specifies the number of times the SNMP manager has accessed this device.
OBJECT-TYPE    
  INTEGER  

managementSnmpLastErrorReason 1.3.6.1.4.1.285.7.3
A detailed explanation of why the last SNMP operation failed. It is used by the management station when the SNMP error-status in the response does not fully explain the reason for the failure. For example, 'badValue' can be returned if the user has entered an improper value or if there are insufficient system resources to perform a requested action. The SNMP agent should return the failure explanation only if it is requested by the station that caused it. If no failure has occurred, the SNMP agent should return an empty string when a request for this object.
OBJECT-TYPE    
  DisplayString  

frontpanel 1.3.6.1.4.1.285.8
OBJECT IDENTIFIER    

frontpanelDisplay 1.3.6.1.4.1.285.8.1
This variable contains the text that is displayed in the device's frontpanel display.
OBJECT-TYPE    
  DisplayString  

frontpanelKeyboardAccess 1.3.6.1.4.1.285.8.2
This variable controls whether the keyboard on the device's frontpanel will work. The value enabled(1) means all actions are permitted, status-only(2) means that all keyboard actions that change the device's configuration is denied, while disabled(3) means that all access is denied.
OBJECT-TYPE    
  INTEGER enabled(1), status-only(2), disabled(3)  

frontpanelErrorcode 1.3.6.1.4.1.285.8.3
This variable contains the errorcode that is displayed in the device's frontpanel display.
OBJECT-TYPE    
  INTEGER  

frontpanelErrorLED 1.3.6.1.4.1.285.8.4
This variable contains the state of the error LED on this device's frontpanel.
OBJECT-TYPE    
  INTEGER led-unknown(1), led-off(2), led-on-steady(3), led-flashing(4)  

frontpanelDefaultDisplay 1.3.6.1.4.1.285.8.5
The display of the device is capable of showing different status displays with different counters. This variable determines which counter-display should be shown, when no other error-messages need to be displayed. The device may choose to ignore this value. The value 0 (zero) means default display of the device's choice.
OBJECT-TYPE    
  INTEGER  

frontpanelKeyPress 1.3.6.1.4.1.285.8.6
Some devices have a front-panel keyboard. This variable may be used to remotely operate the front-panel keyboard.
OBJECT-TYPE    
  INTEGER key-enter(400), key-up(401), key-down(402), key-left(403), key-right(404)  

frontpanelDisplayLogTable 1.3.6.1.4.1.285.8.7
This table is used to store history logs in the form of a number of display texts, including a corresponding time stamp.
OBJECT-TYPE    
  SEQUENCE OF  
    FrontpanelDisplayLogEntry

frontpanelDisplayLogEntry 1.3.6.1.4.1.285.8.7.1
This is an entry in the frontpanelDisplayLogTable.
OBJECT-TYPE    
  FrontpanelDisplayLogEntry  

frontpanelDisplayLogIndex 1.3.6.1.4.1.285.8.7.1.1
The entry number in the frontpanelDisplayLogTable. In order to ensure that an SNMP GET-NEXT operation produces consistent results, it is recommended that entries be added to this table starting with a high index value; subsequent addtions to the table should happen with decreasing index values.
OBJECT-TYPE    
  INTEGER  

frontpanelDisplayLogTimeStamp 1.3.6.1.4.1.285.8.7.1.2
The time at which the entry was made.
OBJECT-TYPE    
  TimeTicks  

frontpanelDisplayLogDisplayText 1.3.6.1.4.1.285.8.7.1.3
The text string from the front panel display.
OBJECT-TYPE    
  DisplayString  

products 1.3.6.1.4.1.285.9
OBJECT IDENTIFIER    

tokenRingBridgeSR 1.3.6.1.4.1.285.9.1
OBJECT IDENTIFIER    

controlledAccessUnit 1.3.6.1.4.1.285.9.2
OBJECT IDENTIFIER    

controlledAttachmentModule 1.3.6.1.4.1.285.9.3
OBJECT IDENTIFIER    

etherNetAttachmentHUB 1.3.6.1.4.1.285.9.4
OBJECT IDENTIFIER    

tokenRingRemoteBridgeAndCAM 1.3.6.1.4.1.285.9.5
OBJECT IDENTIFIER    

tokenRingMultiPortBridge 1.3.6.1.4.1.285.9.6
OBJECT IDENTIFIER    

desktopManagementAgent 1.3.6.1.4.1.285.9.7
OBJECT IDENTIFIER    

localPCBridge 1.3.6.1.4.1.285.9.8
OBJECT IDENTIFIER    

remoteDOSPCBridge 1.3.6.1.4.1.285.9.9
OBJECT IDENTIFIER    

remoteOS2PCBridge 1.3.6.1.4.1.285.9.10
OBJECT IDENTIFIER    

tokenRingSwitchOc8100 1.3.6.1.4.1.285.9.11
OBJECT IDENTIFIER    

crossfireAtmSwitch 1.3.6.1.4.1.285.9.12
OBJECT IDENTIFIER    

ethernetSwitchOc8200 1.3.6.1.4.1.285.9.13
OBJECT IDENTIFIER    

tokenRingSwitchOc8600 1.3.6.1.4.1.285.9.14
OBJECT IDENTIFIER    

tokenRingSwitchOc8007 1.3.6.1.4.1.285.9.15
OBJECT IDENTIFIER    

crossfireAtmSwitchOc8008 1.3.6.1.4.1.285.9.16
OBJECT IDENTIFIER    

fastEthernetSwitchOc8400 1.3.6.1.4.1.285.9.17
OBJECT IDENTIFIER    

fastEthernetSwitchOc8420 1.3.6.1.4.1.285.9.18
OBJECT IDENTIFIER    

lanscoutOc5020 1.3.6.1.4.1.285.9.19
OBJECT IDENTIFIER    

crossfireAtmSwitchCf9200 1.3.6.1.4.1.285.9.20
OBJECT IDENTIFIER    

crossfireRouterCf7100 1.3.6.1.4.1.285.9.21
OBJECT IDENTIFIER    

tokenRingSwitchCf8500 1.3.6.1.4.1.285.9.22
OBJECT IDENTIFIER    

ethernetSwitchCf8711 1.3.6.1.4.1.285.9.23
OBJECT IDENTIFIER    

ethernetSwitchCf8720 1.3.6.1.4.1.285.9.24
OBJECT IDENTIFIER    

ethernetSwitchCf8810 1.3.6.1.4.1.285.9.25
OBJECT IDENTIFIER    

errorlog 1.3.6.1.4.1.285.10
OBJECT IDENTIFIER    

errorlogTable 1.3.6.1.4.1.285.10.1
This table contains a number of error log entries from the managed device.
OBJECT-TYPE    
  SEQUENCE OF  
    ErrorlogEntry

errorlogEntry 1.3.6.1.4.1.285.10.1.1
OBJECT-TYPE    
  ErrorlogEntry  

errorlogNumber 1.3.6.1.4.1.285.10.1.1.1
The number of the entry.
OBJECT-TYPE    
  INTEGER  

errorlogTimeStamp 1.3.6.1.4.1.285.10.1.1.2
This variable describes the device's perception of the time when the error occurred.
OBJECT-TYPE    
  TimeTicks  

errorlogErrorDescription 1.3.6.1.4.1.285.10.1.1.3
This variable contains a description of the error that occurred in this device.
OBJECT-TYPE    
  DisplayString  

errorlogErrorData 1.3.6.1.4.1.285.10.1.1.4
This variable contains additional information about the error.
OBJECT-TYPE    
  OCTET STRING  

errorlogTime 1.3.6.1.4.1.285.10.1.1.5
This variable describes the device's conception of the calendar time when the error occurred. This is measured in seconds since 00:00:00 on 1 January 1970 (i.e. UNIX standard time).
OBJECT-TYPE    
  INTEGER  

errorlogTimeRemoved 1.3.6.1.4.1.285.10.1.1.6
This variable describes the device's conception of the calendar time when the error condition disappeared. This is measured in seconds since 00:00:00 on 1 January 1970 (i.e. UNIX standard time). A value of 0 (zero) indicates that the error condition has not disappeared.
OBJECT-TYPE    
  INTEGER  

errorlogCategory 1.3.6.1.4.1.285.10.1.1.7
This variable contains the category of the error log
OBJECT-TYPE    
  INTEGER bootload(1), startup(2), operational(3)  

errorlogSeverity 1.3.6.1.4.1.285.10.1.1.8
This variable contains the severity of the error log
OBJECT-TYPE    
  INTEGER information(1), notice(2), warning(3), error(4), critical(5), alert(6), panic(7), debug(8), fatal(9)  

errorlogPhysicalIf 1.3.6.1.4.1.285.10.1.1.9
This variable contains the physical interface number of the error log, if the log is related to a certain physical interface. Otherwise it will have the value 0
OBJECT-TYPE    
  INTEGER  

errorlogVirtualIf 1.3.6.1.4.1.285.10.1.1.10
This variable contains the virtual interface number of the error log, if the log is related to a certain virtual interface. Otherwise it will have the value 0
OBJECT-TYPE    
  INTEGER  

errorlogTraceControl 1.3.6.1.4.1.285.10.2
The current state of device's trace log area.
OBJECT-TYPE    
  INTEGER log-empty(1), log-present(2), save-log(3), erase-log(4)  

errorlogTraceMaskCurrent 1.3.6.1.4.1.285.10.3
The current trace log mask. The interpretation of this variable is device specific.
OBJECT-TYPE    
  OCTET STRING  

errorlogTraceMaskInitial 1.3.6.1.4.1.285.10.4
The current trace log mask. The interpretation of this variable is device specific.
OBJECT-TYPE    
  OCTET STRING  

errorlogTraceMaskOperational 1.3.6.1.4.1.285.10.5
The current trace log mask. The interpretation of this variable is device specific.
OBJECT-TYPE    
  OCTET STRING  

errorlogTraceLogSize 1.3.6.1.4.1.285.10.6
The size of the trace log area (in bytes).
OBJECT-TYPE    
  INTEGER  

errorlogTraceSliceTable 1.3.6.1.4.1.285.10.7
This table provides access to the device's trace log.
OBJECT-TYPE    
  SEQUENCE OF  
    ErrorlogTraceSliceTableEntry

errorlogTraceSliceTableEntry 1.3.6.1.4.1.285.10.7.1
OBJECT-TYPE    
  ErrorlogTraceSliceTableEntry  

errorlogTraceSliceNumber 1.3.6.1.4.1.285.10.7.1.1
The number of this trace log area slice (each of size `errorlogTraceSliceSize').
OBJECT-TYPE    
  INTEGER  

errorlogTraceSliceSize 1.3.6.1.4.1.285.10.7.1.2
The size of this slice of the trace log area.
OBJECT-TYPE    
  INTEGER 1..2048  

errorlogTraceSliceData 1.3.6.1.4.1.285.10.7.1.3
The data in this slice of the trace log area.
OBJECT-TYPE    
  OCTET STRING  

errorlogStoredSeverityLevel 1.3.6.1.4.1.285.10.8
This variable contains the severity level determining which error logs will be written to permanent storage. Any error log with severity higher than or equal to this severity level will be stored for retrieval, even after a reset
OBJECT-TYPE    
  INTEGER  

trconfig 1.3.6.1.4.1.285.11
OBJECT IDENTIFIER    

trconfigTable 1.3.6.1.4.1.285.11.1
This table contains Token Ring configuration information for each interface.
OBJECT-TYPE    
  SEQUENCE OF  
    TrconfigEntry

trconfigEntry 1.3.6.1.4.1.285.11.1.1
OBJECT-TYPE    
  TrconfigEntry  

trconfigIfNumber 1.3.6.1.4.1.285.11.1.1.1
This number corresponds to the interface number, ifIndex, in ifTable from MIB-II.
OBJECT-TYPE    
  INTEGER  

trconfigBurntInAddress 1.3.6.1.4.1.285.11.1.1.2
The burnt-in MAC address for this interface.
OBJECT-TYPE    
  MacAddress  

trconfigLocalAddress 1.3.6.1.4.1.285.11.1.1.3
The locally administered MAC address for this interface. If locally address MAC addresses are not used, this entry is all zeroes.
OBJECT-TYPE    
  MacAddress  

trconfigEarlyTokenRelease 1.3.6.1.4.1.285.11.1.1.4
Indicates if early token release is used on the interface.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

Defined Objects

MacAddress  
OCTET STRING SIZE(6)    

IPXAddress  
OCTET STRING SIZE(12)    

RowStatus  
INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)    

InfoHardwareOptionTableEntry  
SEQUENCE    
  INTEGER as infoHardwareOptionNo  
  DisplayString as infoHardwareOption  

InfoSoftwareOptionTableEntry  
SEQUENCE    
  INTEGER as infoSoftwareOptionNo  
  DisplayString as infoSoftwareOption  

InfoSoftwareMIBsTableEntry  
SEQUENCE    
  INTEGER as infoSoftwareMIBsNo  
  OBJECT IDENTIFIER as infoSoftwareMIBsObjectID  
  DisplayString as infoSoftwareMIBsDescription  

InfoXtraSwEntry  
SEQUENCE    
  INTEGER as infoXtraSwIndex  
  INTEGER as infoXtraSwFileUse  
  DisplayString as infoXtraSwProductId  
  DisplayString as infoXtraSwVersion  
  DisplayString as infoXtraSwEcoLevel  
  DisplayString as infoXtraSwSerialNumber  
  OCTET STRING as infoXtraSwOptions  

InfoModuleEntry  
SEQUENCE    
  INTEGER as infoModuleIndex  
  DisplayString as infoModuleHwProductId  
  DisplayString as infoModuleHwVersion  
  DisplayString as infoModuleHwSerialNumber  
  DisplayString as infoModuleBootpromVersion  

InfoSwImageEntry  
SEQUENCE    
  INTEGER as infoSwImageModuleIndex  
  INTEGER as infoSwImageNo  
  DisplayString as infoSwImageProductId  
  DisplayString as infoSwImageVersion  
  INTEGER as infoSwImageDownloadTime  

InetCommunityTableEntry  
SEQUENCE    
  INTEGER as inetCommunityNo  
  DisplayString as inetCommunityName  
  IpAddress as inetCommunityIPAddress  
  INTEGER as inetCommunityAccess  
  INTEGER as inetCommunityDelete  
  IPXAddress as inetCommunityIPXAddress  
  INTEGER as inetCommunityTransportProtocols  
  MacAddress as inetCommunityMACAddress  

InetTrapTableEntry  
SEQUENCE    
  OCTET STRING as inetTrapCommunity  
  IpAddress as inetTrapDestIPAddress  
  OCTET STRING as inetTrapEventDisableMask  
  INTEGER as inetTrapDelete  
  INTEGER as inetTrapDestUDPPort  
  INTEGER as inetTrapIndex  
  IPXAddress as inetTrapDestIPXAddress  
  INTEGER as inetTrapTransportProtocols  
  INTEGER as inetTrapIPEncapsulation  
  INTEGER as inetTrapIPXEncapsulation  

InetIPAddressEntry  
SEQUENCE    
  INTEGER as inetIPAddressIfNumber  
  IpAddress as inetIPAddressIPAddress  
  IpAddress as inetIPAddressNetmask  
  IpAddress as inetIPAddressDefaultGateway  
  INTEGER as inetIPAddressEnableRwho  
  INTEGER as inetIPAddressEnableRIP  
  INTEGER as inetIPAddressIPEncapsulation  

ControlTrapTableEntry  
SEQUENCE    
  INTEGER as controlTrapIndex  
  INTEGER as controlTrapMIBIndex  
  INTEGER as controlTrapNumber  
  DisplayString as controlTrapDescription  
  INTEGER as controlTrapGeneration  

ControlTftpSessionEntry  
SEQUENCE    
  INTEGER as controlTftpSessionIndex  
  RowStatus as controlTftpSessionRowStatus  
  INTEGER as controlTftpSessionDirection  
  IpAddress as controlTftpSessionServerAddress  
  DisplayString as controlTftpSessionServerFile  
  DisplayString as controlTftpSessionLocalFile  
  INTEGER as controlTftpSessionStatus  
  INTEGER as controlTftpSessionProgress  
  INTEGER as controlTftpSessionFileSize  

ManagementTableEntry  
SEQUENCE    
  INTEGER as managementNo  
  DisplayString as managementDescription  
  INTEGER as managementAssociationState  
  INTEGER as managementPriority  

ManagementSnmpAccessLogEntry  
SEQUENCE    
  INTEGER as managementSnmpAccessLogIndex  
  TimeTicks as managementSnmpAccessLogTimeStamp  
  IpAddress as managementSnmpAccessLogIpAddress  
  INTEGER as managementSnmpAccessLogAccessRights  
  INTEGER as managementSnmpAccessLogCount  

FrontpanelDisplayLogEntry  
SEQUENCE    
  INTEGER as frontpanelDisplayLogIndex  
  TimeTicks as frontpanelDisplayLogTimeStamp  
  DisplayString as frontpanelDisplayLogDisplayText  

ErrorlogEntry  
SEQUENCE    
  INTEGER as errorlogNumber  
  TimeTicks as errorlogTimeStamp  
  DisplayString as errorlogErrorDescription  
  OCTET STRING as errorlogErrorData  
  INTEGER as errorlogTime  
  INTEGER as errorlogTimeRemoved  
  INTEGER as errorlogCategory  
  INTEGER as errorlogSeverity  
  INTEGER as errorlogPhysicalIf  
  INTEGER as errorlogVirtualIf  

ErrorlogTraceSliceTableEntry  
SEQUENCE    
  INTEGER as errorlogTraceSliceNumber  
  INTEGER as errorlogTraceSliceSize  
  OCTET STRING as errorlogTraceSliceData  

TrconfigEntry  
SEQUENCE    
  INTEGER as trconfigIfNumber  
  MacAddress as trconfigBurntInAddress  
  MacAddress as trconfigLocalAddress  
  INTEGER as trconfigEarlyTokenRelease