
P-BRIDGE-MIB
File:
P-BRIDGE-MIB.mib (35055 bytes)
Imported modules
Imported symbols
Defined Objects
| dot1dTpHCPortEntry |
1.3.6.1.2.1.17.4.5.1 |
| Statistics information for each high capacity port of a transparent bridge. |
| OBJECT-TYPE |
|
|
|
| |
Dot1dTpHCPortEntry |
|
|
| dot1dTpHCPortInFrames |
1.3.6.1.2.1.17.4.5.1.1 |
| The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames. |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| dot1dTpHCPortOutFrames |
1.3.6.1.2.1.17.4.5.1.2 |
| The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames. |
| OBJECT-TYPE |
|
|
|
| |
Counter64 |
|
|
| dot1dTpPortOverflowTable |
1.3.6.1.2.1.17.4.6 |
| A table that contains the most-significant bits of statistics counters for ports that are associated with this transparent bridge that are on high capacity interfaces, as defined in the conformance clauses for this table. This table is provided as a way to read 64-bit counters for agents which support only SNMPv1. Note that the reporting of most-significant and least-significant counter bits separately runs the risk of missing an overflow of the lower bits in the interval between sampling. The manager must be aware of this possibility, even within the same varbindlist, when interpreting the results of a request or asynchronous notification. |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
Dot1dTpPortOverflowEntry |
|
| dot1dTpPortOverflowEntry |
1.3.6.1.2.1.17.4.6.1 |
| The most significant bits of statistics counters for a high capacity interface of a transparent bridge. Each object is associated with a corresponding object in dot1dTpPortTable which indicates the least significant bits of the counter. |
| OBJECT-TYPE |
|
|
|
| |
Dot1dTpPortOverflowEntry |
|
|
| pBridgeMIB |
1.3.6.1.2.1.17.6 |
| The Bridge MIB Extension module for managing Priority and Multicast Filtering, defined by IEEE 802.1D-1998. |
| MODULE-IDENTITY |
|
|
|
| dot1dDeviceCapabilities |
1.3.6.1.2.1.17.6.1.1.1 |
| Indicates the optional parts of IEEE 802.1D and 802.1Q that are implemented by this device and are manageable through this MIB. Capabilities that are allowed on a per-port basis are indicated in dot1dPortCapabilities. |
| OBJECT-TYPE |
|
|
|
| |
BITS |
dot1dExtendedFilteringServices(0), dot1dTrafficClasses(1), dot1qStaticEntryIndividualPort(2), dot1qIVLCapable(3), dot1qSVLCapable(4), dot1qHybridCapable(5), dot1qConfigurablePvidTagging(6), dot1dLocalVlanCapable(7) |
|
| dot1dGmrpStatus |
1.3.6.1.2.1.17.6.1.1.3 |
| The administrative status requested by management for GMRP. The value enabled(1) indicates that GMRP should be enabled on this device, in all VLANs, on all ports for which it has not been specifically disabled. When disabled(2), GMRP is disabled, in all VLANs, on all ports and all GMRP packets will be forwarded transparently. This object affects both Applicant and Registrar state machines. A transition from disabled(2) to enabled(1) will cause a reset of all GMRP state machines on all ports. |
| OBJECT-TYPE |
|
|
|
| |
EnabledStatus |
|
|
| dot1dPortCapabilitiesEntry |
1.3.6.1.2.1.17.6.1.1.4.1 |
| A set of capabilities information about this port indexed by dot1dBasePort. |
| OBJECT-TYPE |
|
|
|
| |
Dot1dPortCapabilitiesEntry |
|
|
| dot1dPortCapabilities |
1.3.6.1.2.1.17.6.1.1.4.1.1 |
| Indicates the parts of IEEE 802.1D and 802.1Q that are optional on a per-port basis that are implemented by this device and are manageable through this MIB. |
| OBJECT-TYPE |
|
|
|
| |
BITS |
dot1qDot1qTagging(0), dot1qConfigurableAcceptableFrameTypes(1), dot1qIngressFiltering(2) |
|
| dot1dPortPriorityEntry |
1.3.6.1.2.1.17.6.1.2.1.1 |
| A list of Default User Priorities for each port of a transparent bridge. This is indexed by dot1dBasePort. |
| OBJECT-TYPE |
|
|
|
| |
Dot1dPortPriorityEntry |
|
|
| dot1dPortDefaultUserPriority |
1.3.6.1.2.1.17.6.1.2.1.1.1 |
| The default ingress User Priority for this port. This only has effect on media, such as Ethernet, that do not support native User Priority. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..7 |
|
| dot1dUserPriorityRegenTable |
1.3.6.1.2.1.17.6.1.2.2 |
| A list of Regenerated User Priorities for each received User Priority on each port of a bridge. The Regenerated User Priority value may be used to index the Traffic Class Table for each input port. This only has effect on media that support native User Priority. The default values for Regenerated User Priorities are the same as the User Priorities. |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
Dot1dUserPriorityRegenEntry |
|
| dot1dUserPriorityRegenEntry |
1.3.6.1.2.1.17.6.1.2.2.1 |
| A mapping of incoming User Priority to a Regenerated User Priority. |
| OBJECT-TYPE |
|
|
|
| |
Dot1dUserPriorityRegenEntry |
|
|
| dot1dTrafficClassEntry |
1.3.6.1.2.1.17.6.1.2.3.1 |
| User Priority to Traffic Class mapping. |
| OBJECT-TYPE |
|
|
|
| |
Dot1dTrafficClassEntry |
|
|
| dot1dTrafficClassPriority |
1.3.6.1.2.1.17.6.1.2.3.1.1 |
| The Priority value determined for the received frame. This value is equivalent to the priority indicated in the tagged frame received, or one of the evaluated priorities, determined according to the media-type. For untagged frames received from Ethernet media, this value is equal to the dot1dPortDefaultUserPriority value for the ingress port. For untagged frames received from non-Ethernet media, this value is equal to the dot1dRegenUserPriority value for the ingress port and media-specific user priority. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..7 |
|
| dot1dPortOutboundAccessPriorityEntry |
1.3.6.1.2.1.17.6.1.2.4.1 |
| Regenerated User Priority to Outbound Access Priority mapping. |
| OBJECT-TYPE |
|
|
|
| |
Dot1dPortOutboundAccessPriorityEntry |
|
|
| dot1dGarp |
1.3.6.1.2.1.17.6.1.3 |
| OBJECT IDENTIFIER |
|
|
|
| dot1dPortGarpEntry |
1.3.6.1.2.1.17.6.1.3.1.1 |
| GARP control information for a bridge port. |
| OBJECT-TYPE |
|
|
|
| |
Dot1dPortGarpEntry |
|
|
| dot1dGmrp |
1.3.6.1.2.1.17.6.1.4 |
| OBJECT IDENTIFIER |
|
|
|
| dot1dPortGmrpEntry |
1.3.6.1.2.1.17.6.1.4.1.1 |
| GMRP control and status information for a bridge port. |
| OBJECT-TYPE |
|
|
|
| |
Dot1dPortGmrpEntry |
|
|
| dot1dPortGmrpStatus |
1.3.6.1.2.1.17.6.1.4.1.1.1 |
| The administrative state of GMRP operation on this port. The value enabled(1) indicates that GMRP is enabled on this port in all VLANs as long as dot1dGmrpStatus is also enabled(1). A value of disabled(2) indicates that GMRP is disabled on this port in all VLANs: any GMRP packets received will be silently discarded and no GMRP registrations will be propagated from other ports. Setting this to a value of enabled(1) will be stored by the agent but will only take effect on the GMRP protocol operation if dot1dGmrpStatus also indicates the value enabled(1). This object affects all GMRP Applicant and Registrar state machines on this port. A transition from disabled(2) to enabled(1) will cause a reset of all GMRP state machines on this port. |
| OBJECT-TYPE |
|
|
|
| |
EnabledStatus |
|
|
Defined Objects
| Dot1dPortCapabilitiesEntry |
|
| SEQUENCE |
|
|
|
| |
BITS as dot1dPortCapabilities |
|
|
| Dot1dPortPriorityEntry |
|
| SEQUENCE |
|
|
|
| |
INTEGER as dot1dPortDefaultUserPriority |
|
|
| |
INTEGER as dot1dPortNumTrafficClasses |
|
|
| Dot1dUserPriorityRegenEntry |
|
| SEQUENCE |
|
|
|
| |
INTEGER as dot1dUserPriority |
|
|
| |
INTEGER as dot1dRegenUserPriority |
|
|
| Dot1dTrafficClassEntry |
|
| SEQUENCE |
|
|
|
| |
INTEGER as dot1dTrafficClassPriority |
|
|
| |
INTEGER as dot1dTrafficClass |
|
|
| Dot1dPortOutboundAccessPriorityEntry |
|
| SEQUENCE |
|
|
|
| |
INTEGER as dot1dPortOutboundAccessPriority |
|
|
| Dot1dPortGarpEntry |
|
| SEQUENCE |
|
|
|
| |
TimeInterval as dot1dPortGarpJoinTime |
|
|
| |
TimeInterval as dot1dPortGarpLeaveTime |
|
|
| |
TimeInterval as dot1dPortGarpLeaveAllTime |
|
|
| Dot1dPortGmrpEntry |
|
| SEQUENCE |
|
|
|
| |
EnabledStatus as dot1dPortGmrpStatus |
|
|
| |
Counter32 as dot1dPortGmrpFailedRegistrations |
|
|
| |
MacAddress as dot1dPortGmrpLastPduOrigin |
|
|
| Dot1dTpHCPortEntry |
|
| SEQUENCE |
|
|
|
| |
Counter64 as dot1dTpHCPortInFrames |
|
|
| |
Counter64 as dot1dTpHCPortOutFrames |
|
|
| |
Counter64 as dot1dTpHCPortInDiscards |
|
|
| Dot1dTpPortOverflowEntry |
|
| SEQUENCE |
|
|
|
| |
Counter32 as dot1dTpPortInOverflowFrames |
|
|
| |
Counter32 as dot1dTpPortOutOverflowFrames |
|
|
| |
Counter32 as dot1dTpPortInOverflowDiscards |
|
|