
| RFC-1212 | PAIRGAIN-COMMON-HD-MIB |
| OBJECT-TYPE | pgainHDSL |
| hdslSpan15mPerformanceTable | 1.3.6.1.4.1.927.1.7.1 | ||
| This table provides the 15-minute performance history monitoring of the last 24 hours for all HDSL spans Errored Seconds (ES), Severely Errored Seconds (SES) and Unavailable Seconds (UAS). | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| HdslSpan15mPerformanceEntry | |||
| hdslSpan15mPerformanceEntry | 1.3.6.1.4.1.927.1.7.1.1 | ||
| Entries of the HDSL span 15-min performance table | |||
| OBJECT-TYPE | |||
| HdslSpan15mPerformanceEntry | |||
| hdslSpan15mSlotId | 1.3.6.1.4.1.927.1.7.1.1.1 | ||
| Identifies the HDSL line occupied in the chassis. The slots are numbered 1 through 16 from left to right. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslSpan15mSpanId | 1.3.6.1.4.1.927.1.7.1.1.2 | ||
| Identifies the span of the HDSL line we are monitoring. Depending on the number of regenerator(s) (REGs) present in an HDSL loop, a span will be numbered as follows: 0 REG - only 1 span. 1 REG - span between LTU and REG is identified as 1. span between REG and NTU is identified as 2. 2 REGs - span between LTU and REG #1 is identified as 1. span between REG #1 and REG #2 is identified as 2. span between REG #2 and NTU is identified as 3. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslSpan15mHistoryId | 1.3.6.1.4.1.927.1.7.1.1.3 | ||
| Identify the history ID within the 96 15-minute performance history. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl15mESLoopANet | 1.3.6.1.4.1.927.1.7.1.1.4 | ||
| HDSL 15-min ES count on Loop A's Network side of the span. | |||
| OBJECT-TYPE | |||
| Short | |||
| hdsl15mESLoopBNet | 1.3.6.1.4.1.927.1.7.1.1.5 | ||
| HDSL 15-min ES count on Loop B's Network side of the span. | |||
| OBJECT-TYPE | |||
| Short | |||
| hdsl15mUASLoopANet | 1.3.6.1.4.1.927.1.7.1.1.6 | ||
| HDSL 15-min UAS count on Loop A's Network side of the span. | |||
| OBJECT-TYPE | |||
| Short | |||
| hdsl15mUASLoopBNet | 1.3.6.1.4.1.927.1.7.1.1.7 | ||
| HDSL 15-min UAS count on Loop B's Network side of the span. | |||
| OBJECT-TYPE | |||
| Short | |||
| hdsl15mSESLoopANet | 1.3.6.1.4.1.927.1.7.1.1.8 | ||
| HDSL 15-min SES count on Loop A's Network side of the span. | |||
| OBJECT-TYPE | |||
| Short | |||
| hdsl15mSESLoopBNet | 1.3.6.1.4.1.927.1.7.1.1.9 | ||
| HDSL 15-min SES count on Loop B's Network side of the span. | |||
| OBJECT-TYPE | |||
| Short | |||
| hdsl15mESLoopACust | 1.3.6.1.4.1.927.1.7.1.1.10 | ||
| HDSL 15-min ES count on Loop A's Customer side of the span. | |||
| OBJECT-TYPE | |||
| Short | |||
| hdsl15mESLoopBCust | 1.3.6.1.4.1.927.1.7.1.1.11 | ||
| HDSL 15-min ES count on Loop B's Customer side of the span. | |||
| OBJECT-TYPE | |||
| Short | |||
| hdsl15mUASLoopACust | 1.3.6.1.4.1.927.1.7.1.1.12 | ||
| HDSL 15-min UAS count on Loop A's Customer side of the span. | |||
| OBJECT-TYPE | |||
| Short | |||
| hdsl15mUASLoopBCust | 1.3.6.1.4.1.927.1.7.1.1.13 | ||
| HDSL 15-min UAS count on Loop B's Customer side of the span. | |||
| OBJECT-TYPE | |||
| Short | |||
| hdsl15mSESLoopACust | 1.3.6.1.4.1.927.1.7.1.1.14 | ||
| HDSL 15-min SES count on Loop A's customer side of the span. | |||
| OBJECT-TYPE | |||
| Short | |||
| hdsl15mSESLoopBCust | 1.3.6.1.4.1.927.1.7.1.1.15 | ||
| HDSL 15-min SES count on Loop B's customer side of the span. | |||
| OBJECT-TYPE | |||
| Short | |||
| hdslSpan24hPerformanceTable | 1.3.6.1.4.1.927.1.7.2 | ||
| This table provides 24-hour performance history monitoring of the last 7 days for all HDSL spans Errored Seconds (ES), Severely Errored Seconds (SES) and Unavailable Seconds (UAS). | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| HdslSpan24hPerformanceEntry | |||
| hdslSpan24hPerformanceEntry | 1.3.6.1.4.1.927.1.7.2.1 | ||
| Entries of the HDSL span 24-hour performance table | |||
| OBJECT-TYPE | |||
| HdslSpan24hPerformanceEntry | |||
| hdslSpan24hSlotId | 1.3.6.1.4.1.927.1.7.2.1.1 | ||
| Identifies the HDSL line occupied in the chassis. The slots are numbered 1 through 16 from left to right. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslSpan24hSpanId | 1.3.6.1.4.1.927.1.7.2.1.2 | ||
| Identifies the span of the HDSL line we are monitoring. Depending on the number of regenerator(s) (REGs) present in an HDSL loop, a span will be numbered as follows: 0 REG - only 1 span. 1 REG - span between LTU and REG is identified as 1. span between REG and NTU is identified as 2. 2 REGs - span between LTU and REG #1 is identified as 1. span between REG #1 and REG #2 is identified as 2. span between REG #2 and NTU is identified as 3. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslSpan24hHistoryId | 1.3.6.1.4.1.927.1.7.2.1.3 | ||
| Identify the history ID within the 7 24-hour performance history. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl24hESLoopANet | 1.3.6.1.4.1.927.1.7.2.1.4 | ||
| HDSL 24-hour ES count on Loop A's Network side of the span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl24hESLoopBNet | 1.3.6.1.4.1.927.1.7.2.1.5 | ||
| HDSL 24-hour ES count on Loop B's Network side of the span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl24hUASLoopANet | 1.3.6.1.4.1.927.1.7.2.1.6 | ||
| HDSL 24-hour UAS count on Loop A's Network side of the span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl24hUASLoopBNet | 1.3.6.1.4.1.927.1.7.2.1.7 | ||
| HDSL 24-hour UAS count on Loop B's Network side of the span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl24hSESLoopANet | 1.3.6.1.4.1.927.1.7.2.1.8 | ||
| HDSL 24-hour SES count on Loop A's Network side of the span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl24hSESLoopBNet | 1.3.6.1.4.1.927.1.7.2.1.9 | ||
| HDSL 24-hour SES count on Loop B's Network side of the span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl24hESLoopACust | 1.3.6.1.4.1.927.1.7.2.1.10 | ||
| HDSL 24-hour ES count on Loop A's Customer side of the span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl24hESLoopBCust | 1.3.6.1.4.1.927.1.7.2.1.11 | ||
| HDSL 24-hour ES count on Loop B's Customer side of the span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl24hUASLoopACust | 1.3.6.1.4.1.927.1.7.2.1.12 | ||
| HDSL 24-hour UAS count on Loop A's Customer side of the span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl24hUASLoopBCust | 1.3.6.1.4.1.927.1.7.2.1.13 | ||
| HDSL 24-hour UAS count on Loop B's Customer side of the span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl24hSESLoopACust | 1.3.6.1.4.1.927.1.7.2.1.14 | ||
| HDSL 24-hour SES count on Loop A's Customer side of the span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdsl24hSESLoopBCust | 1.3.6.1.4.1.927.1.7.2.1.15 | ||
| HDSL 24-hour SES count on Loop B's Customer side of the span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslSpanCurr24hPerformanceTable | 1.3.6.1.4.1.927.1.7.3 | ||
| This table provides the current 24-hour performance history monitoring for all HDSL spans Errored Seconds (ES), Severely Errored Seconds (SES) and Unavailable Seconds (UAS). | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| HdslSpanCurr24hPerformanceEntry | |||
| hdslSpanCurr24hPerformanceEntry | 1.3.6.1.4.1.927.1.7.3.1 | ||
| Entries of the HDSL span Current 24-hour PM counts table | |||
| OBJECT-TYPE | |||
| HdslSpanCurr24hPerformanceEntry | |||
| hdslSpanCurr24hSlotId | 1.3.6.1.4.1.927.1.7.3.1.1 | ||
| Identifies the HDSL line occupied in the chassis. The slots are numbered 1 through 16 from left to right. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslSpanCurr24hSpanId | 1.3.6.1.4.1.927.1.7.3.1.2 | ||
| Identifies the span of the HDSL line we are monitoring. Depending on the number of regenerator(s) (REGs) present in an HDSL loop, a span will be numbered as follows: 0 REG - only 1 span. 1 REG - span between LTU and REG is identified as 1. span between REG and NTU is identified as 2. 2 REGs - span between LTU and REG #1 is identified as 1. span between REG #1 and REG #2 is identified as 2. span between REG #2 and NTU is identified as 3. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslCurr24hESLoopANet | 1.3.6.1.4.1.927.1.7.3.1.3 | ||
| HDSL Current 24-hour ES count on Loop A's Network side of the span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslCurr24hESLoopBNet | 1.3.6.1.4.1.927.1.7.3.1.4 | ||
| HDSL 24-hour ES count on Loop B's Network side of the span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslCurr24hUASLoopANet | 1.3.6.1.4.1.927.1.7.3.1.5 | ||
| HDSL 24-hour UAS count on Loop A's Network side of the span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslCurr24hUASLoopBNet | 1.3.6.1.4.1.927.1.7.3.1.6 | ||
| HDSL 24-hour UAS count on Loop B's Network side of the span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslCurr24hSESLoopANet | 1.3.6.1.4.1.927.1.7.3.1.7 | ||
| HDSL 24-hour SES count on Loop A's Network side of the span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslCurr24hSESLoopBNet | 1.3.6.1.4.1.927.1.7.3.1.8 | ||
| HDSL 24-hour SES count on Loop B's Network side of the span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslCurr24hESLoopACust | 1.3.6.1.4.1.927.1.7.3.1.9 | ||
| HDSL 24-hour ES count on Loop A's Customer side of the span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslCurr24hESLoopBCust | 1.3.6.1.4.1.927.1.7.3.1.10 | ||
| HDSL 24-hour ES count on Loop B's Customer side of the span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslCurr24hUASLoopACust | 1.3.6.1.4.1.927.1.7.3.1.11 | ||
| HDSL 24-hour UAS count on Loop A's Customer side of the span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslCurr24hUASLoopBCust | 1.3.6.1.4.1.927.1.7.3.1.12 | ||
| HDSL 24-hour UAS count on Loop B's Customer side of the span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslCurr24hSESLoopACust | 1.3.6.1.4.1.927.1.7.3.1.13 | ||
| HDSL 24-hour SES count on Loop A's Customer side of the span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslCurr24hSESLoopBCust | 1.3.6.1.4.1.927.1.7.3.1.14 | ||
| HDSL 24-hour SES count on Loop B's Customer side of the span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslSpanStatisticsTable | 1.3.6.1.4.1.927.1.7.4 | ||
| This table lists statistics for margin, pulse attenuation and state of the loop for all spans of the HDSL loop. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| HdslSpanStatisticsEntry | |||
| hdslSpanStatisticsEntry | 1.3.6.1.4.1.927.1.7.4.1 | ||
| Entries of the HDSL span statistics table | |||
| OBJECT-TYPE | |||
| HdslSpanStatisticsEntry | |||
| hdslStatisticsSlotId | 1.3.6.1.4.1.927.1.7.4.1.1 | ||
| Identifies the HDSL line occupied in the chassis. The slots are numbered 1 through 16 from left to right. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslStatisticsSpanId | 1.3.6.1.4.1.927.1.7.4.1.2 | ||
| Identifies the span of the HDSL line we are monitoring. Depending on the number of regenerator(s) (REGs) present in an HDSL loop, a span will be numbered as follows: 0 REG - only 1 span. 1 REG - span between LTU and REG is identified as 1. span between REG and NTU is identified as 2. 2 REGs - span between LTU and REG #1 is identified as 1. span between REG #1 and REG #2 is identified as 2. span between REG #2 and NTU is identified as 3. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslLoopPairState | 1.3.6.1.4.1.927.1.7.4.1.3 | ||
| Current state on the HDSL loop of span: 0 - loop pair is normal 1 - loop pair is exchanged. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslLoopATipRingReversal | 1.3.6.1.4.1.927.1.7.4.1.4 | ||
| Current TIP/RING state on the HDSL loop A of span: 0 - TIP/RING on loop A is not reversed. 1 - TIP/RING on loop A is reversed. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslLoopBTipRingReversal | 1.3.6.1.4.1.927.1.7.4.1.5 | ||
| Current TIP/RING state on the HDSL loop B of span: 0 - TIP/RING on loop B is not reversed. 1 - TIP/RING on loop B is reversed. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslLoopAUpState | 1.3.6.1.4.1.927.1.7.4.1.6 | ||
| Current loop state on loop A of the span: 0 - loop is up. 1 - loop is acquiring/converging. 2 - loop is signaling. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslLoopBUpState | 1.3.6.1.4.1.927.1.7.4.1.7 | ||
| Current loop state on loop B of the span: 0 - loop is up. 1 - loop is acquiring/converging. 2 - loop is signaling. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslMarginLoopANet | 1.3.6.1.4.1.927.1.7.4.1.8 | ||
| Current Margin on Loop A's Network side of the span. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslMarginHighLoopANet | 1.3.6.1.4.1.927.1.7.4.1.9 | ||
| Highest Margin on Loop A's Network side of the span. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslMarginLowLoopANet | 1.3.6.1.4.1.927.1.7.4.1.10 | ||
| Lowest Margin on Loop A's Network side of the span. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslMarginLoopBNet | 1.3.6.1.4.1.927.1.7.4.1.11 | ||
| Current Margin on Loop B's Network side of the span. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslMarginHighLoopBNet | 1.3.6.1.4.1.927.1.7.4.1.12 | ||
| Highest Margin on Loop B's Network side of the span. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslMarginLowLoopBNet | 1.3.6.1.4.1.927.1.7.4.1.13 | ||
| Lowest Margin on Loop B's Network side of the span. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslPulseAttenuationLoopANet | 1.3.6.1.4.1.927.1.7.4.1.14 | ||
| Pulse Attenuation on Loop A's Network side of the span. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslPulseAttenuationLoopBNet | 1.3.6.1.4.1.927.1.7.4.1.15 | ||
| Pulse Attenuation on Loop B's Network side of the span. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslMarginLoopACust | 1.3.6.1.4.1.927.1.7.4.1.16 | ||
| Current Margin on Loop A's Customer side of the span. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslMarginHighLoopACust | 1.3.6.1.4.1.927.1.7.4.1.17 | ||
| Highest Margin on Loop A's Customer side of the span. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslMarginLowLoopACust | 1.3.6.1.4.1.927.1.7.4.1.18 | ||
| Lowest Margin on Loop A's Customer side of the span. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslMarginLoopBCust | 1.3.6.1.4.1.927.1.7.4.1.19 | ||
| Current Margin on Loop B's Customer side of the span. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslMarginHighLoopBCust | 1.3.6.1.4.1.927.1.7.4.1.20 | ||
| Highest Margin on Loop B's Customer side of the span. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslMarginLowLoopBCust | 1.3.6.1.4.1.927.1.7.4.1.21 | ||
| Lowest Margin on Loop B's Customer side of the span. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslPulseAttenuationLoopACust | 1.3.6.1.4.1.927.1.7.4.1.22 | ||
| Pulse Attenuation on Loop A's Customer side of the span. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslPulseAttenuationLoopBCust | 1.3.6.1.4.1.927.1.7.4.1.23 | ||
| Pulse Attenuation on Loop B's Customer side of the span. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslSpanAlarmTable | 1.3.6.1.4.1.927.1.7.5 | ||
| This table provides the HDSL alarms indication on both loops of the HDSL spans. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| HdslSpanAlarmEntry | |||
| hdslSpanAlarmEntry | 1.3.6.1.4.1.927.1.7.5.1 | ||
| Entries of the HDSL span alarm table | |||
| OBJECT-TYPE | |||
| HdslSpanAlarmEntry | |||
| hdslSpanAlarmSlotId | 1.3.6.1.4.1.927.1.7.5.1.1 | ||
| Identifies the HDSL line occupied in the chassis. The slots are numbered 1 through 16 from left to right. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslSpanAlarmSpanId | 1.3.6.1.4.1.927.1.7.5.1.2 | ||
| Identifies the span of the HDSL line we are monitoring. Depending on the number of regenerator(s) (REGs) present in an HDSL loop, a span will be numbered as follows: 0 REG - only 1 span. 1 REG - span between LTU and REG is identified as 1. span between REG and NTU is identified as 2. 2 REGs - span between LTU and REG #1 is identified as 1. span between REG #1 and REG #2 is identified as 2. span between REG #2 and NTU is identified as 3. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslMarginAlarmLoopANet | 1.3.6.1.4.1.927.1.7.5.1.3 | ||
| Margin Threshold Exceeded on loop A's Network side of the span. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslMarginAlarmLoopBNet | 1.3.6.1.4.1.927.1.7.5.1.4 | ||
| Margin Threshold Exceeded on loop B's Network side of the span. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslESAlarmLoopANet | 1.3.6.1.4.1.927.1.7.5.1.5 | ||
| Errored Seconds threshold exceeded on loop A's Network side of the span. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslESAlarmLoopBNet | 1.3.6.1.4.1.927.1.7.5.1.6 | ||
| Errored Seconds threshold exceeded on loop B's Network side of the span. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslUASAlarmLoopANet | 1.3.6.1.4.1.927.1.7.5.1.7 | ||
| Unavailable Seconds threshold exceeded on loop A's Network side of the span. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslUASAlarmLoopBNet | 1.3.6.1.4.1.927.1.7.5.1.8 | ||
| Unavailable Seconds threshold exceeded on loop B's Network side of the span. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslMarginAlarmLoopACust | 1.3.6.1.4.1.927.1.7.5.1.9 | ||
| Margin Threshold Exceeded on loop A's Customer side of the span. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslMarginAlarmLoopBCust | 1.3.6.1.4.1.927.1.7.5.1.10 | ||
| Margin Threshold Exceeded on loop B's Customer side of the span. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslESAlarmLoopACust | 1.3.6.1.4.1.927.1.7.5.1.11 | ||
| Errored Seconds Exceeded on loop A's Customer side of the span. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslESAlarmLoopBCust | 1.3.6.1.4.1.927.1.7.5.1.12 | ||
| Errored Seconds Exceeded on loop B's Customer side of the span. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslUASAlarmLoopACust | 1.3.6.1.4.1.927.1.7.5.1.13 | ||
| Unavailable Seconds threshold exceeded on loop A's customer side of the span. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslUASAlarmLoopBCust | 1.3.6.1.4.1.927.1.7.5.1.14 | ||
| Unavailable Seconds threshold exceeded on loop B's customer side of the span. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslLOSWAlarmLoopA | 1.3.6.1.4.1.927.1.7.5.1.15 | ||
| Loss of Sync Word (LOSW) occurred on loop A's Network side of the HDSL loop. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslLOSWAlarmLoopB | 1.3.6.1.4.1.927.1.7.5.1.16 | ||
| Loss of Sync Word (LOSW) occurred on loop B's Network side of the HDSL loop. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslPFOAlarmLoopA | 1.3.6.1.4.1.927.1.7.5.1.17 | ||
| Power Feed Open (PFO) on loop A's Network side of the HDSL loop. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslPFOAlarmLoopB | 1.3.6.1.4.1.927.1.7.5.1.18 | ||
| Power Feed Open (PFO) on loop B's Network side of the HDSL loop. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslPFSAlarmLoopA | 1.3.6.1.4.1.927.1.7.5.1.19 | ||
| Power Feed Short (PFS) on loop A's Network side of the HDSL loop. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslPFSAlarmLoopB | 1.3.6.1.4.1.927.1.7.5.1.20 | ||
| Power Feed Short (PFS) on loop B's Network side of the HDSL loop. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslBERAlarmLoopA | 1.3.6.1.4.1.927.1.7.5.1.21 | ||
| Bit Error Rate (BER) on loop A's Network side of the HDSL loop. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslBERAlarmLoopB | 1.3.6.1.4.1.927.1.7.5.1.22 | ||
| Bit Error Rate (BER) on loop B's Network side of the HDSL loop. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslSpanAlarmHistoryTable | 1.3.6.1.4.1.927.1.7.6 | ||
| This table provides the HDSL alarms history on both loops of the HDSL spans. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| HdslSpanAlarmHistoryEntry | |||
| hdslSpanAlarmHistoryEntry | 1.3.6.1.4.1.927.1.7.6.1 | ||
| Entries of the HDSL span Alarm History table | |||
| OBJECT-TYPE | |||
| HdslSpanAlarmHistoryEntry | |||
| hdslSpanAlarmHistorySlotId | 1.3.6.1.4.1.927.1.7.6.1.1 | ||
| Identifies the HDSL line occupied in the chassis. The slots are numbered 1 through 16 from left to right. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslSpanAlarmHistorySpanId | 1.3.6.1.4.1.927.1.7.6.1.2 | ||
| Identifies the span of the HDSL line we are monitoring. Depending on the number of regenerator(s) (REGs) present in an HDSL loop, a span will be numbered as follows: 0 REG - only 1 span. 1 REG - Span between LTU and REG is identified as 1. Span between REG and NTU is identified as 2. 2 REGs - Span between LTU and REG #1 is identified as 1. Span between REG #1 and REG #2 is identified as 2. Span between REG #2 and NTU is identified as 3. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslMarginAlarmFirstLoopA | 1.3.6.1.4.1.927.1.7.6.1.3 | ||
| Date and time Margin threshold exceeded alarm first occurred on Loop A of a span | |||
| OBJECT-TYPE | |||
| PgTimeStamp | |||
| hdslMarginAlarmLastLoopA | 1.3.6.1.4.1.927.1.7.6.1.4 | ||
| Date and time Margin threshold exceeded alarm last occurred on Loop A of a span | |||
| OBJECT-TYPE | |||
| PgTimeStamp | |||
| hdslMarginAlarmCountLoopA | 1.3.6.1.4.1.927.1.7.6.1.5 | ||
| The number of times the Margin threshold exceeded alarm has occurred on Loop A of a span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslMarginAlarmFirstLoopB | 1.3.6.1.4.1.927.1.7.6.1.6 | ||
| Date and time Margin threshold exceeded alarm first occurred on Loop B of a span | |||
| OBJECT-TYPE | |||
| PgTimeStamp | |||
| hdslMarginAlarmLastLoopB | 1.3.6.1.4.1.927.1.7.6.1.7 | ||
| Date and time Margin threshold exceeded alarm last occurred on Loop B of a span | |||
| OBJECT-TYPE | |||
| PgTimeStamp | |||
| hdslMarginAlarmCountLoopB | 1.3.6.1.4.1.927.1.7.6.1.8 | ||
| The number of times the Margin threshold exceeded alarm has occurred on Loop B of a span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslESAlarmFirstLoopA | 1.3.6.1.4.1.927.1.7.6.1.9 | ||
| Date and time Errored Seconds threshold exceeded alarm first occurred on Loop A of a span | |||
| OBJECT-TYPE | |||
| PgTimeStamp | |||
| hdslESAlarmLastLoopA | 1.3.6.1.4.1.927.1.7.6.1.10 | ||
| Date and time Errored Seconds threshold exceeded alarm last occurred on Loop A of a span | |||
| OBJECT-TYPE | |||
| PgTimeStamp | |||
| hdslESAlarmCountLoopA | 1.3.6.1.4.1.927.1.7.6.1.11 | ||
| The number of times the Errored Seconds threshold exceeded alarm has occurred on Loop A of a span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslESAlarmFirstLoopB | 1.3.6.1.4.1.927.1.7.6.1.12 | ||
| Date and time Errored Seconds threshold exceeded alarm first occurred on Loop B of a span | |||
| OBJECT-TYPE | |||
| PgTimeStamp | |||
| hdslESAlarmLastLoopB | 1.3.6.1.4.1.927.1.7.6.1.13 | ||
| Date and time Errored Seconds threshold exceeded alarm last occurred on Loop B of a span | |||
| OBJECT-TYPE | |||
| PgTimeStamp | |||
| hdslESAlarmCountLoopB | 1.3.6.1.4.1.927.1.7.6.1.14 | ||
| The number of times the Errored Seconds threshold exceeded alarm has occurred on Loop B of a span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslUASAlarmFirstLoopA | 1.3.6.1.4.1.927.1.7.6.1.15 | ||
| Date and time Unavailable Seconds threshold exceeded alarm first occurred on Loop A of a span | |||
| OBJECT-TYPE | |||
| PgTimeStamp | |||
| hdslUASAlarmLastLoopA | 1.3.6.1.4.1.927.1.7.6.1.16 | ||
| Date and time Unavailable Seconds threshold exceeded alarm last occurred on Loop A of a span | |||
| OBJECT-TYPE | |||
| PgTimeStamp | |||
| hdslUASAlarmCountLoopA | 1.3.6.1.4.1.927.1.7.6.1.17 | ||
| The number of times the Unavailable Seconds threshold exceeded alarm has occurred on Loop A of a span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslUASAlarmFirstLoopB | 1.3.6.1.4.1.927.1.7.6.1.18 | ||
| Date and time Unavailable Seconds threshold exceeded alarm first occurred on Loop B of a span | |||
| OBJECT-TYPE | |||
| PgTimeStamp | |||
| hdslUASAlarmLastLoopB | 1.3.6.1.4.1.927.1.7.6.1.19 | ||
| Date and time Unavailable Seconds threshold exceeded alarm last occurred on Loop B of a span | |||
| OBJECT-TYPE | |||
| PgTimeStamp | |||
| hdslUASAlarmCountLoopB | 1.3.6.1.4.1.927.1.7.6.1.20 | ||
| The number of times the Unavailable Seconds threshold exceeded alarm has occurred on Loop B of a span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslLOSWAlarmFirstLoopA | 1.3.6.1.4.1.927.1.7.6.1.21 | ||
| Date and time the Loss of Sync Word alarm first occurred on Loop A of a span | |||
| OBJECT-TYPE | |||
| PgTimeStamp | |||
| hdslLOSWAlarmLastLoopA | 1.3.6.1.4.1.927.1.7.6.1.22 | ||
| Date and time the Loss of Sync Word alarm last occurred on Loop A of a span | |||
| OBJECT-TYPE | |||
| PgTimeStamp | |||
| hdslLOSWAlarmCountLoopA | 1.3.6.1.4.1.927.1.7.6.1.23 | ||
| The number of times the Loss of Sync Word alarm has occurred on Loop A of a span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslLOSWAlarmFirstLoopB | 1.3.6.1.4.1.927.1.7.6.1.24 | ||
| Date and time the Loss of Sync Word alarm first occurred on Loop B of a span | |||
| OBJECT-TYPE | |||
| PgTimeStamp | |||
| hdslLOSWAlarmLastLoopB | 1.3.6.1.4.1.927.1.7.6.1.25 | ||
| Date and time the Loss of Sync Word alarm last occurred on Loop B of a span | |||
| OBJECT-TYPE | |||
| PgTimeStamp | |||
| hdslLOSWAlarmCountLoopB | 1.3.6.1.4.1.927.1.7.6.1.26 | ||
| The number of times the Loss of Sync Word alarm has occurred on Loop B of a span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslPFOAlarmFirstLoopA | 1.3.6.1.4.1.927.1.7.6.1.27 | ||
| Date and time the Power Feed Open alarm first occurred on Loop A of a span | |||
| OBJECT-TYPE | |||
| PgTimeStamp | |||
| hdslPFOAlarmLastLoopA | 1.3.6.1.4.1.927.1.7.6.1.28 | ||
| Date and time the Power Feed Open alarm last occurred on Loop A of a span | |||
| OBJECT-TYPE | |||
| PgTimeStamp | |||
| hdslPFOAlarmCountLoopA | 1.3.6.1.4.1.927.1.7.6.1.29 | ||
| The number of times the Power Feed Open alarm has occurred on Loop A of a span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslPFOAlarmFirstLoopB | 1.3.6.1.4.1.927.1.7.6.1.30 | ||
| Date and time the Power Feed Open alarm first occurred on Loop B of a span | |||
| OBJECT-TYPE | |||
| PgTimeStamp | |||
| hdslPFOAlarmLastLoopB | 1.3.6.1.4.1.927.1.7.6.1.31 | ||
| Date and time the Power Feed Open alarm last occurred on Loop B of a span | |||
| OBJECT-TYPE | |||
| PgTimeStamp | |||
| hdslPFOAlarmCountLoopB | 1.3.6.1.4.1.927.1.7.6.1.32 | ||
| The number of times the Power Feed Open alarm has occurred on Loop B of a span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslPFSAlarmFirstLoopA | 1.3.6.1.4.1.927.1.7.6.1.33 | ||
| Date and time the Power Feed Short alarm first occurred on Loop A of a span | |||
| OBJECT-TYPE | |||
| PgTimeStamp | |||
| hdslPFSAlarmLastLoopA | 1.3.6.1.4.1.927.1.7.6.1.34 | ||
| Date and time the Power Feed Short alarm last occurred on Loop A of a span | |||
| OBJECT-TYPE | |||
| PgTimeStamp | |||
| hdslPFSAlarmCountLoopA | 1.3.6.1.4.1.927.1.7.6.1.35 | ||
| The number of times the Power Feed Short alarm has occurred on Loop A of a span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslPFSAlarmFirstLoopB | 1.3.6.1.4.1.927.1.7.6.1.36 | ||
| Date and time the Power Feed Short alarm first occurred on Loop B of a span | |||
| OBJECT-TYPE | |||
| PgTimeStamp | |||
| hdslPFSAlarmLastLoopB | 1.3.6.1.4.1.927.1.7.6.1.37 | ||
| Date and time the Power Feed Short alarm last occurred on Loop B of a span | |||
| OBJECT-TYPE | |||
| PgTimeStamp | |||
| hdslPFSAlarmCountLoopB | 1.3.6.1.4.1.927.1.7.6.1.38 | ||
| The number of times the Power Feed Short alarm has occurred on Loop B of a span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslBERAlarmFirstLoopA | 1.3.6.1.4.1.927.1.7.6.1.39 | ||
| Date and time the BER threshold exceeded alarm first occurred on Loop A of a span | |||
| OBJECT-TYPE | |||
| PgTimeStamp | |||
| hdslBERAlarmLastLoopA | 1.3.6.1.4.1.927.1.7.6.1.40 | ||
| Date and time the BER threshold exceeded alarm last occurred on Loop A of a span | |||
| OBJECT-TYPE | |||
| PgTimeStamp | |||
| hdslBERAlarmCountLoopA | 1.3.6.1.4.1.927.1.7.6.1.41 | ||
| The number of times the BER threshold exceeded alarm has occurred on Loop A of a span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslBERAlarmFirstLoopB | 1.3.6.1.4.1.927.1.7.6.1.42 | ||
| Date and time the BER threshold exceeded alarm first occurred on Loop B of a span | |||
| OBJECT-TYPE | |||
| PgTimeStamp | |||
| hdslBERAlarmLastLoopB | 1.3.6.1.4.1.927.1.7.6.1.43 | ||
| Date and time the BER threshold exceeded alarm last occurred on Loop B of a span | |||
| OBJECT-TYPE | |||
| PgTimeStamp | |||
| hdslBERAlarmCountLoopB | 1.3.6.1.4.1.927.1.7.6.1.44 | ||
| The number of times the BER threshold exceeded alarm has occurred on Loop B of a span. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslSpanAlarmSeverityTable | 1.3.6.1.4.1.927.1.7.7 | ||
| The HDSL span alarm severity table provides severity settings for HDSL alarms reporting and threshold settings for Errored Second(ES), Margin(MAR), Unavailable Seconds(UAS) and Bit Error Rate(BER). | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| HdslSpanAlarmSeverityEntry | |||
| hdslSpanAlarmSeverityEntry | 1.3.6.1.4.1.927.1.7.7.1 | ||
| Entry in the hdslSpanAlarmSeverityTable | |||
| OBJECT-TYPE | |||
| HdslSpanAlarmSeverityEntry | |||
| hdslSpanAlarmSeveritySlotId | 1.3.6.1.4.1.927.1.7.7.1.1 | ||
| The slot number of the HDSL loop whose alarm severity or threshold we are setting. The slots are numbered 1 through 16 from left to right. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslSpanAlarmSeveritySpanId | 1.3.6.1.4.1.927.1.7.7.1.2 | ||
| The span number of the HDSL loop whose alarm severity or threshold we are setting. Depending on the number of regenerator(s) (REGs) present in an HDSL loop, a span will be numbered as follows: 0 REG - only 1 span. 1 REG - span between LTU and REG is identified as 1. span between REG and NTU is identified as 2. 2 REGs - span between LTU and REG #1 is identified as 1. span between REG #1 and REG #2 is identified as 2. span between REG #2 and NTU is identified as 3. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hdslSpanLOSWAlarmSetting | 1.3.6.1.4.1.927.1.7.7.1.3 | ||
| Sets the severity for Loss of Sync Word alarm. | |||
| OBJECT-TYPE | |||
| PgAlarmSeverityProtectionSwitchMode | |||
| hdslSpanPFOAlarmSetting | 1.3.6.1.4.1.927.1.7.7.1.4 | ||
| Sets the severity for Power Feed Open alarm. | |||
| OBJECT-TYPE | |||
| PgAlarmSeverityMode | |||
| hdslSpanPFSAlarmSetting | 1.3.6.1.4.1.927.1.7.7.1.5 | ||
| Sets the severity for Power Feed Short alarm. | |||
| OBJECT-TYPE | |||
| PgAlarmSeverityMode | |||
| hdslSpanMarginThreshold | 1.3.6.1.4.1.927.1.7.7.1.6 | ||
| Sets the HDSL Margin threshold value. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslSpanMarginAlarmSetting | 1.3.6.1.4.1.927.1.7.7.1.7 | ||
| Sets the severity for Margin threshold exceeded alarm. | |||
| OBJECT-TYPE | |||
| PgAlarmSeverityProtectionSwitchMode | |||
| hdslSpanESThreshold | 1.3.6.1.4.1.927.1.7.7.1.8 | ||
| Sets the HDSL Errored Seconds threshold value. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslSpanESAlarmSetting | 1.3.6.1.4.1.927.1.7.7.1.9 | ||
| Sets the severity for Errored Seconds threshold exceeded alarm. | |||
| OBJECT-TYPE | |||
| PgAlarmSeverityProtectionSwitchMode | |||
| hdslSpanUASThreshold | 1.3.6.1.4.1.927.1.7.7.1.10 | ||
| Sets the HDSL Unavailable Seconds threshold value. | |||
| OBJECT-TYPE | |||
| Byte | |||
| hdslSpanUASAlarmSetting | 1.3.6.1.4.1.927.1.7.7.1.11 | ||
| Sets the severity for UAS threshold exceeded alarm. | |||
| OBJECT-TYPE | |||
| PgAlarmSeverityMode | |||
| hdslSpanBERThreshold | 1.3.6.1.4.1.927.1.7.7.1.12 | ||
| Sets the HDSL BER threshold value. | |||
| OBJECT-TYPE | |||
| PgBERThreshold | |||
| hdslSpanBERAlarmSetting | 1.3.6.1.4.1.927.1.7.7.1.13 | ||
| Sets the severity for HDSL BER threshold exceeded alarm. | |||
| OBJECT-TYPE | |||
| PgAlarmSeverityMode | |||
| Byte | |||
| INTEGER | 0..255 | ||
| Short | |||
| INTEGER | 0..65535 | ||
| PgTimeStamp | |||
| OCTET STRING | SIZE(6) | ||
| PgAlarmSeverityMode | |||
| INTEGER | disable(1), minor(2), major(3), notAvailable(4) | ||
| PgAlarmSeverityProtectionSwitchMode | |||
| INTEGER | disable(1), minor(2), major(3), protectionSwitchMajor(4), notAvailable(5) | ||
| PgBERThreshold | |||
| INTEGER | 0..65535 | ||
| HdslSpan15mPerformanceEntry | |||
| SEQUENCE | |||
| INTEGER as hdslSpan15mSlotId | |||
| INTEGER as hdslSpan15mSpanId | |||
| INTEGER as hdslSpan15mHistoryId | |||
| Short as hdsl15mESLoopANet | |||
| Short as hdsl15mESLoopBNet | |||
| Short as hdsl15mUASLoopANet | |||
| Short as hdsl15mUASLoopBNet | |||
| Short as hdsl15mSESLoopANet | |||
| Short as hdsl15mSESLoopBNet | |||
| Short as hdsl15mESLoopACust | |||
| Short as hdsl15mESLoopBCust | |||
| Short as hdsl15mUASLoopACust | |||
| Short as hdsl15mUASLoopBCust | |||
| Short as hdsl15mSESLoopACust | |||
| Short as hdsl15mSESLoopBCust | |||
| HdslSpan24hPerformanceEntry | |||
| SEQUENCE | |||
| INTEGER as hdslSpan24hSlotId | |||
| INTEGER as hdslSpan24hSpanId | |||
| INTEGER as hdslSpan24hHistoryId | |||
| INTEGER as hdsl24hESLoopANet | |||
| INTEGER as hdsl24hESLoopBNet | |||
| INTEGER as hdsl24hUASLoopANet | |||
| INTEGER as hdsl24hUASLoopBNet | |||
| INTEGER as hdsl24hSESLoopANet | |||
| INTEGER as hdsl24hSESLoopBNet | |||
| INTEGER as hdsl24hESLoopACust | |||
| INTEGER as hdsl24hESLoopBCust | |||
| INTEGER as hdsl24hUASLoopACust | |||
| INTEGER as hdsl24hUASLoopBCust | |||
| INTEGER as hdsl24hSESLoopACust | |||
| INTEGER as hdsl24hSESLoopBCust | |||
| HdslSpanCurr24hPerformanceEntry | |||
| SEQUENCE | |||
| INTEGER as hdslSpanCurr24hSlotId | |||
| INTEGER as hdslSpanCurr24hSpanId | |||
| INTEGER as hdslCurr24hESLoopANet | |||
| INTEGER as hdslCurr24hESLoopBNet | |||
| INTEGER as hdslCurr24hUASLoopANet | |||
| INTEGER as hdslCurr24hUASLoopBNet | |||
| INTEGER as hdslCurr24hSESLoopANet | |||
| INTEGER as hdslCurr24hSESLoopBNet | |||
| INTEGER as hdslCurr24hESLoopACust | |||
| INTEGER as hdslCurr24hESLoopBCust | |||
| INTEGER as hdslCurr24hUASLoopACust | |||
| INTEGER as hdslCurr24hUASLoopBCust | |||
| INTEGER as hdslCurr24hSESLoopACust | |||
| INTEGER as hdslCurr24hSESLoopBCust | |||
| HdslSpanStatisticsEntry | |||
| SEQUENCE | |||
| INTEGER as hdslStatisticsSlotId | |||
| INTEGER as hdslStatisticsSpanId | |||
| Byte as hdslLoopPairState | |||
| Byte as hdslLoopATipRingReversal | |||
| Byte as hdslLoopBTipRingReversal | |||
| Byte as hdslLoopAUpState | |||
| Byte as hdslLoopBUpState | |||
| Byte as hdslMarginLoopANet | |||
| Byte as hdslMarginHighLoopANet | |||
| Byte as hdslMarginLowLoopANet | |||
| Byte as hdslMarginLoopBNet | |||
| Byte as hdslMarginHighLoopBNet | |||
| Byte as hdslMarginLowLoopBNet | |||
| Byte as hdslPulseAttenuationLoopANet | |||
| Byte as hdslPulseAttenuationLoopBNet | |||
| Byte as hdslMarginLoopACust | |||
| Byte as hdslMarginHighLoopACust | |||
| Byte as hdslMarginLowLoopACust | |||
| Byte as hdslMarginLoopBCust | |||
| Byte as hdslMarginHighLoopBCust | |||
| Byte as hdslMarginLowLoopBCust | |||
| Byte as hdslPulseAttenuationLoopACust | |||
| Byte as hdslPulseAttenuationLoopBCust | |||
| HdslSpanAlarmEntry | |||
| SEQUENCE | |||
| INTEGER as hdslSpanAlarmSlotId | |||
| INTEGER as hdslSpanAlarmSpanId | |||
| Byte as hdslMarginAlarmLoopANet | |||
| Byte as hdslMarginAlarmLoopBNet | |||
| Byte as hdslESAlarmLoopANet | |||
| Byte as hdslESAlarmLoopBNet | |||
| Byte as hdslUASAlarmLoopANet | |||
| Byte as hdslUASAlarmLoopBNet | |||
| Byte as hdslMarginAlarmLoopACust | |||
| Byte as hdslMarginAlarmLoopBCust | |||
| Byte as hdslESAlarmLoopACust | |||
| Byte as hdslESAlarmLoopBCust | |||
| Byte as hdslUASAlarmLoopACust | |||
| Byte as hdslUASAlarmLoopBCust | |||
| Byte as hdslLOSWAlarmLoopA | |||
| Byte as hdslLOSWAlarmLoopB | |||
| Byte as hdslPFOAlarmLoopA | |||
| Byte as hdslPFOAlarmLoopB | |||
| Byte as hdslPFSAlarmLoopA | |||
| Byte as hdslPFSAlarmLoopB | |||
| Byte as hdslBERAlarmLoopA | |||
| Byte as hdslBERAlarmLoopB | |||
| HdslSpanAlarmHistoryEntry | |||
| SEQUENCE | |||
| INTEGER as hdslSpanAlarmHistorySlotId | |||
| INTEGER as hdslSpanAlarmHistorySpanId | |||
| PgTimeStamp as hdslMarginAlarmFirstLoopA | |||
| PgTimeStamp as hdslMarginAlarmLastLoopA | |||
| INTEGER as hdslMarginAlarmCountLoopA | |||
| PgTimeStamp as hdslMarginAlarmFirstLoopB | |||
| PgTimeStamp as hdslMarginAlarmLastLoopB | |||
| INTEGER as hdslMarginAlarmCountLoopB | |||
| PgTimeStamp as hdslESAlarmFirstLoopA | |||
| PgTimeStamp as hdslESAlarmLastLoopA | |||
| INTEGER as hdslESAlarmCountLoopA | |||
| PgTimeStamp as hdslESAlarmFirstLoopB | |||
| PgTimeStamp as hdslESAlarmLastLoopB | |||
| INTEGER as hdslESAlarmCountLoopB | |||
| PgTimeStamp as hdslUASAlarmFirstLoopA | |||
| PgTimeStamp as hdslUASAlarmLastLoopA | |||
| INTEGER as hdslUASAlarmCountLoopA | |||
| PgTimeStamp as hdslUASAlarmFirstLoopB | |||
| PgTimeStamp as hdslUASAlarmLastLoopB | |||
| INTEGER as hdslUASAlarmCountLoopB | |||
| PgTimeStamp as hdslLOSWAlarmFirstLoopA | |||
| PgTimeStamp as hdslLOSWAlarmLastLoopA | |||
| INTEGER as hdslLOSWAlarmCountLoopA | |||
| PgTimeStamp as hdslLOSWAlarmFirstLoopB | |||
| PgTimeStamp as hdslLOSWAlarmLastLoopB | |||
| INTEGER as hdslLOSWAlarmCountLoopB | |||
| PgTimeStamp as hdslPFOAlarmFirstLoopA | |||
| PgTimeStamp as hdslPFOAlarmLastLoopA | |||
| INTEGER as hdslPFOAlarmCountLoopA | |||
| PgTimeStamp as hdslPFOAlarmFirstLoopB | |||
| PgTimeStamp as hdslPFOAlarmLastLoopB | |||
| INTEGER as hdslPFOAlarmCountLoopB | |||
| PgTimeStamp as hdslPFSAlarmFirstLoopA | |||
| PgTimeStamp as hdslPFSAlarmLastLoopA | |||
| INTEGER as hdslPFSAlarmCountLoopA | |||
| PgTimeStamp as hdslPFSAlarmFirstLoopB | |||
| PgTimeStamp as hdslPFSAlarmLastLoopB | |||
| INTEGER as hdslPFSAlarmCountLoopB | |||
| PgTimeStamp as hdslBERAlarmFirstLoopA | |||
| PgTimeStamp as hdslBERAlarmLastLoopA | |||
| INTEGER as hdslBERAlarmCountLoopA | |||
| PgTimeStamp as hdslBERAlarmFirstLoopB | |||
| PgTimeStamp as hdslBERAlarmLastLoopB | |||
| INTEGER as hdslBERAlarmCountLoopB | |||
| HdslSpanAlarmSeverityEntry | |||
| SEQUENCE | |||
| INTEGER as hdslSpanAlarmSeveritySlotId | |||
| INTEGER as hdslSpanAlarmSeveritySpanId | |||
| PgAlarmSeverityProtectionSwitchMode as hdslSpanLOSWAlarmSetting | |||
| PgAlarmSeverityMode as hdslSpanPFOAlarmSetting | |||
| PgAlarmSeverityMode as hdslSpanPFSAlarmSetting | |||
| Byte as hdslSpanMarginThreshold | |||
| PgAlarmSeverityProtectionSwitchMode as hdslSpanMarginAlarmSetting | |||
| Byte as hdslSpanESThreshold | |||
| PgAlarmSeverityProtectionSwitchMode as hdslSpanESAlarmSetting | |||
| Byte as hdslSpanUASThreshold | |||
| PgAlarmSeverityMode as hdslSpanUASAlarmSetting | |||
| PgBERThreshold as hdslSpanBERThreshold | |||
| PgAlarmSeverityMode as hdslSpanBERAlarmSetting | |||