PAIRGAIN-SDSL-MIB

File: PAIRGAIN-SDSL-MIB.mib (48146 bytes)

Imported modules

SNMPv2-SMI RFC-1212 PAIRGAIN-COMMON-HD-MIB
RFC1213-MIB SNMPv2-TC

Imported symbols

Counter32 Integer32 MODULE-IDENTITY
OBJECT-TYPE NOTIFICATION-TYPE OBJECT-TYPE
pgainSDSL ifIndex DisplayString
RowStatus TruthValue

Defined Objects

pgsdslMIB 1.3.6.1.4.1.927.1.13.1
The module defines the SDSL MIB
MODULE-IDENTITY    

sdslMibObjects 1.3.6.1.4.1.927.1.13.1.1
OBJECT IDENTIFIER    

sdsl15mPerformanceTable 1.3.6.1.4.1.927.1.13.1.1.1
This table provides the 15-minute performance history monitoring of the last 24 hours for all SDSL Errored Seconds (ES), and Unavailable Seconds (UAS).
OBJECT-TYPE    
  SEQUENCE OF  
    Sdsl15mPerformanceEntry

sdsl15mPerformanceEntry 1.3.6.1.4.1.927.1.13.1.1.1.1
Entries of the SDSL 15-min performance table. All 96 entries for a 24 hour period are zeroed out and available at power up. Not all of the returned values are legitimate until the appropriate amount of time has elapsed.
OBJECT-TYPE    
  Sdsl15mPerformanceEntry  

sdsl15mHistoryId 1.3.6.1.4.1.927.1.13.1.1.1.1.1
Identifies the history ID within the 96 15-minute performance history.
OBJECT-TYPE    
  Short  

sdsl15mESNet 1.3.6.1.4.1.927.1.13.1.1.1.1.2
SDSL 15-min ES count on Network side of the span.
OBJECT-TYPE    
  Short  

sdsl15mUASNet 1.3.6.1.4.1.927.1.13.1.1.1.1.3
SDSL 15-min UAS count on Network side of the span.
OBJECT-TYPE    
  Short  

sdsl15mESCust 1.3.6.1.4.1.927.1.13.1.1.1.1.4
SDSL 15-min ES count on the Customer side of the span.
OBJECT-TYPE    
  Short  

sdsl15mUASCust 1.3.6.1.4.1.927.1.13.1.1.1.1.5
SDSL 15-min UAS count on the Customer side of the span.
OBJECT-TYPE    
  Short  

sdsl24hPerformanceTable 1.3.6.1.4.1.927.1.13.1.1.2
This table provides 24-hour performance history monitoring of the last 7 days for all SDSL Errored Seconds (ES), and Unavailable Seconds (UAS). All 7 entries for the 7-day history are zeroed out and available at power up. Not all of the returned values are legitimate until the appropriate number of days has elapsed.
OBJECT-TYPE    
  SEQUENCE OF  
    Sdsl24hPerformanceEntry

sdsl24hPerformanceEntry 1.3.6.1.4.1.927.1.13.1.1.2.1
Entries of the SDSL 24-hour performance table
OBJECT-TYPE    
  Sdsl24hPerformanceEntry  

sdsl24hHistoryId 1.3.6.1.4.1.927.1.13.1.1.2.1.1
Identify the history ID within the 7 24-hour performance history.
OBJECT-TYPE    
  Short  

sdsl24hESNet 1.3.6.1.4.1.927.1.13.1.1.2.1.2
SDSL 24-hour ES count on the Network side of the span.
OBJECT-TYPE    
  Short  

sdsl24hUASNet 1.3.6.1.4.1.927.1.13.1.1.2.1.3
SDSL 24-hour UAS count on the Network side of the span.
OBJECT-TYPE    
  Short  

sdsl24hESCust 1.3.6.1.4.1.927.1.13.1.1.2.1.4
SDSL 24-hour ES count on the Customer side of the span.
OBJECT-TYPE    
  Short  

sdsl24hUASCust 1.3.6.1.4.1.927.1.13.1.1.2.1.5
SDSL 24-hour UAS count on the Customer side of the span.
OBJECT-TYPE    
  Short  

sdslCurr24hPerformanceTable 1.3.6.1.4.1.927.1.13.1.1.3
This table provides the current 24-hour performance history monitoring for all SDSL Errored Seconds (ES), and Unavailable Seconds (UAS).
OBJECT-TYPE    
  SEQUENCE OF  
    SdslCurr24hPerformanceEntry

sdslCurr24hPerformanceEntry 1.3.6.1.4.1.927.1.13.1.1.3.1
Entries of the SDSL Current 24-hour PM counts table
OBJECT-TYPE    
  SdslCurr24hPerformanceEntry  

sdslCurr24hESNet 1.3.6.1.4.1.927.1.13.1.1.3.1.1
SDSL Current 24-hour ES count on the Network side of the span.
OBJECT-TYPE    
  Short  

sdslCurr24hUASNet 1.3.6.1.4.1.927.1.13.1.1.3.1.2
SDSL 24-hour UAS count on the Network side of the span.
OBJECT-TYPE    
  Short  

sdslCurr24hESCust 1.3.6.1.4.1.927.1.13.1.1.3.1.3
SDSL 24-hour ES count on the Customer side of the span.
OBJECT-TYPE    
  Short  

sdslCurr24hUASCust 1.3.6.1.4.1.927.1.13.1.1.3.1.4
SDSL 24-hour UAS count on the Customer side of the span.
OBJECT-TYPE    
  Short  

sdslStatisticsTable 1.3.6.1.4.1.927.1.13.1.1.4
This table lists statistics for margin, and pulse attenuation, of the SDSL loop.
OBJECT-TYPE    
  SEQUENCE OF  
    SdslStatisticsEntry

sdslStatisticsEntry 1.3.6.1.4.1.927.1.13.1.1.4.1
Entries of the SDSL line statistics table
OBJECT-TYPE    
  SdslStatisticsEntry  

sdslTipRingReversal 1.3.6.1.4.1.927.1.13.1.1.4.1.1
Current TIP/RING state on the SDSL span: 0 - TIP/RING is not reversed. 1 - TIP/RING is reversed.
OBJECT-TYPE    
  Byte  

sdslUpState 1.3.6.1.4.1.927.1.13.1.1.4.1.2
Current loop state of the span: 0 - loop is up. 1 - loop is acquiring/converging. 2 - loop is signaling.
OBJECT-TYPE    
  Byte  

sdslMarginNet 1.3.6.1.4.1.927.1.13.1.1.4.1.3
Current Margin on the Network side of the span.
OBJECT-TYPE    
  Byte  

sdslMarginHighNet 1.3.6.1.4.1.927.1.13.1.1.4.1.4
Highest Margin on the Network side of the span.
OBJECT-TYPE    
  Byte  

sdslMarginLowNet 1.3.6.1.4.1.927.1.13.1.1.4.1.5
Lowest Margin on the Network side of the span.
OBJECT-TYPE    
  Byte  

sdslPulseAttenuationNet 1.3.6.1.4.1.927.1.13.1.1.4.1.6
Pulse Attenuation on the Network side of the span.
OBJECT-TYPE    
  Byte  

sdslMarginCust 1.3.6.1.4.1.927.1.13.1.1.4.1.7
Current Margin on the Customer side of the span.
OBJECT-TYPE    
  Byte  

sdslMarginHighCust 1.3.6.1.4.1.927.1.13.1.1.4.1.8
Highest Margin on the Customer side of the span.
OBJECT-TYPE    
  Byte  

sdslMarginLowCust 1.3.6.1.4.1.927.1.13.1.1.4.1.9
Lowest Margin on the Customer side of the span.
OBJECT-TYPE    
  Byte  

sdslPulseAttenuationCust 1.3.6.1.4.1.927.1.13.1.1.4.1.10
Pulse Attenuation on the Customer side of the span.
OBJECT-TYPE    
  Byte  

sdslLineTable 1.3.6.1.4.1.927.1.13.1.1.5
This table lists which Profiles (located at the AMC) are assigned to the particular SDSL Line.
OBJECT-TYPE    
  SEQUENCE OF  
    SdslLineEntry

sdslLineEntry 1.3.6.1.4.1.927.1.13.1.1.5.1
Entries of the SDSL line table
OBJECT-TYPE    
  SdslLineEntry  

sdslLineConfProfile 1.3.6.1.4.1.927.1.13.1.1.5.1.1
The value of this object identifies the row in the SDSL Line Configuration Profile Table, (sdslLineConfProfileTable), which applies for this SDSL line. The Profiles are stored on the Management card. In the case which the configuration profile has not been set, the value will be set to '0'.
OBJECT-TYPE    
  SdslLineProfileType  

sdslLineAlarmConfProfile 1.3.6.1.4.1.927.1.13.1.1.5.1.2
The value of this object identifies the row in the SDSL Line Alarm Configuration Profile Table, (sdslLineAlarmConfProfileTable), which applies for this SDSL line. In the case which the configuration profile has not been set, the value will be set to '0'.
OBJECT-TYPE    
  SdslLineProfileType  

sdslAlarmTable 1.3.6.1.4.1.927.1.13.1.1.6
This table provides the SDSL alarms indication.
OBJECT-TYPE    
  SEQUENCE OF  
    SdslAlarmEntry

sdslAlarmEntry 1.3.6.1.4.1.927.1.13.1.1.6.1
Entries of the SDSL span alarm table
OBJECT-TYPE    
  SdslAlarmEntry  

sdslMarginAlarmNet 1.3.6.1.4.1.927.1.13.1.1.6.1.1
Margin Threshold Exceeded on the Network side of the span.
OBJECT-TYPE    
  Byte  

sdslESAlarmNet 1.3.6.1.4.1.927.1.13.1.1.6.1.2
Errored Seconds threshold exceeded on the Network side of the span.
OBJECT-TYPE    
  Byte  

sdslUASAlarmNet 1.3.6.1.4.1.927.1.13.1.1.6.1.3
Unavailable Seconds threshold exceeded on the Network side of the span.
OBJECT-TYPE    
  Byte  

sdslMarginAlarmCust 1.3.6.1.4.1.927.1.13.1.1.6.1.4
Margin Threshold Exceeded on the Customer side of the span.
OBJECT-TYPE    
  Byte  

sdslESAlarmCust 1.3.6.1.4.1.927.1.13.1.1.6.1.5
Errored Seconds Exceeded on the Customer side of the span.
OBJECT-TYPE    
  Byte  

sdslUASAlarmCust 1.3.6.1.4.1.927.1.13.1.1.6.1.6
Unavailable Seconds threshold exceeded on the customer side of the span.
OBJECT-TYPE    
  Byte  

sdslLOSWAlarm 1.3.6.1.4.1.927.1.13.1.1.6.1.7
Loss of Sync Word (LOSW) occurred on the Network side of the SDSL loop.
OBJECT-TYPE    
  Byte  

sdslAlarmHistoryTable 1.3.6.1.4.1.927.1.13.1.1.7
This table provides the SDSL alarms history
OBJECT-TYPE    
  SEQUENCE OF  
    SdslAlarmHistoryEntry

sdslAlarmHistoryEntry 1.3.6.1.4.1.927.1.13.1.1.7.1
Entries of the SDSL Alarm History table
OBJECT-TYPE    
  SdslAlarmHistoryEntry  

sdslMarginAlarmFirst 1.3.6.1.4.1.927.1.13.1.1.7.1.1
Date and time Margin threshold exceeded alarm first occurred
OBJECT-TYPE    
  PgSdslTimeStamp  

sdslMarginAlarmLast 1.3.6.1.4.1.927.1.13.1.1.7.1.2
Date and time Margin threshold exceeded alarm last occurred
OBJECT-TYPE    
  PgSdslTimeStamp  

sdslMarginAlarmCount 1.3.6.1.4.1.927.1.13.1.1.7.1.3
The number of times the Margin threshold exceeded alarm has occurred
OBJECT-TYPE    
  Short  

sdslESAlarmFirst 1.3.6.1.4.1.927.1.13.1.1.7.1.4
Date and time Errored Seconds threshold exceeded alarm first occurred
OBJECT-TYPE    
  PgSdslTimeStamp  

sdslESAlarmLast 1.3.6.1.4.1.927.1.13.1.1.7.1.5
Date and time Errored Seconds threshold exceeded alarm last occurred
OBJECT-TYPE    
  PgSdslTimeStamp  

sdslESAlarmCount 1.3.6.1.4.1.927.1.13.1.1.7.1.6
The number of times the Errored Seconds threshold exceeded alarm has occurred
OBJECT-TYPE    
  Short  

sdslUASAlarmFirst 1.3.6.1.4.1.927.1.13.1.1.7.1.7
Date and time Unavailable Seconds threshold exceeded alarm occurred
OBJECT-TYPE    
  PgSdslTimeStamp  

sdslUASAlarmLast 1.3.6.1.4.1.927.1.13.1.1.7.1.8
Date and time Unavailable Seconds threshold exceeded alarm last occurred
OBJECT-TYPE    
  PgSdslTimeStamp  

sdslUASAlarmCount 1.3.6.1.4.1.927.1.13.1.1.7.1.9
The number of times the Unavailable Seconds threshold exceeded alarm has occurred
OBJECT-TYPE    
  Short  

sdslLOSWAlarmFirst 1.3.6.1.4.1.927.1.13.1.1.7.1.10
Date and time the Loss of Sync Word alarm first occurred
OBJECT-TYPE    
  PgSdslTimeStamp  

sdslLOSWAlarmLast 1.3.6.1.4.1.927.1.13.1.1.7.1.11
Date and time the Loss of Sync Word alarm last occurred
OBJECT-TYPE    
  PgSdslTimeStamp  

sdslLOSWAlarmCount 1.3.6.1.4.1.927.1.13.1.1.7.1.12
The number of times the Loss of Sync Word alarm has occurred.
OBJECT-TYPE    
  Short  

sdslLineConfProfileIndexNext 1.3.6.1.4.1.927.1.13.1.1.8
This object contains an appropriate value to be used for sdslLineConfProfileIndex when creating entries in the sdslLineConfProfileTable. The value '0' indicates that no unassigned entries are available. To obtain the sdslLineConfProfileIndexNext value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. If the implementator of this MIB has choosen not to implement 'dynamic assignment' of profiles, this object is not useful and should return noSuchName upon SNMP request.
OBJECT-TYPE    
  INTEGER 0..65535  

sdslLineConfProfileTable 1.3.6.1.4.1.927.1.13.1.1.9
This table contains information on the sdsl line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure the sdsl line.
OBJECT-TYPE    
  SEQUENCE OF  
    SdslLineConfProfileEntry

sdslLineConfProfileEntry 1.3.6.1.4.1.927.1.13.1.1.9.1
Each entry consists of a list of parameters that represents the configuration of an sdsl port. A profile is created in one step with all necessary parameter values and sdslLineProfileRowStatus set to createAndGo. This RowStatus object is also used to delete destroy profiles.
OBJECT-TYPE    
  SdslLineConfProfileEntry  

sdslLineConfProfileIndex 1.3.6.1.4.1.927.1.13.1.1.9.1.1
This object is used by the line configuration table in order to identify a row of this table
OBJECT-TYPE    
  SdslLineProfileType  

sdslRateMode 1.3.6.1.4.1.927.1.13.1.1.9.1.2
Rate Mode defined in Rate Selective/Adaptive Specification for SDSL Products. Mode 1 - Fixed Rate (FR) - The channel shall operate at the rate set by the sdslRate parameter and supported at the remote unit either by default, manual switch setting, or Smart Manual mode on the modem. Support of the two-level signalling mechanism at the remote is known as Smart Manual mode. The remote unit is configured via a two-level signaling mechanism prior to the normal startup sequence. This mechanism allows the link rate to be controlled by the Central Office shelf. If the remote modem does not support the two-level signaling mechanism, the system will timeout and the default startup sequence will begin. Mode 2 - Rate Adaptive (RA) - NOT supported in this MIB yet. Allows the unit to evaluate the characteristics of the SDSL channel and adapt the data rate based upon user-defined performance criteria.
OBJECT-TYPE    
  INTEGER 1..32000  

sdslRemFeatures 1.3.6.1.4.1.927.1.13.1.1.9.1.3
This will variable will reflect the features supported by the remote unit (modem) which are received during the two-level signaling mechanism that occurs before the start-up sequence.
OBJECT-TYPE    
  Short  

sdslRate 1.3.6.1.4.1.927.1.13.1.1.9.1.4
The desired rate for the particular SDSL span. Set at the CO using management software
OBJECT-TYPE    
  INTEGER 1..32000  

sdslLineConfProfileRowStatus 1.3.6.1.4.1.927.1.13.1.1.9.1.5
This object is used to create a new row or modify or delete an existing row in this table. If the implementator of this MIB has choosen not to implement 'dynamic assignment' of profiles, this object is not useful and should return noSuchName upon SNMP request.
OBJECT-TYPE    
  RowStatus  

sdslLineAlarmConfProfileIndexNext 1.3.6.1.4.1.927.1.13.1.1.10
This object contains an appropriate value to be used for sdslLineAlarmConfProfileIndex when creating entries in the sdslLineAlarmConfTable. The value '0' indicates that no unassigned entries are available. To obtain the sdslLineAlarmConfProfileIndexNext value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. If the implementator of this MIB has choosen not to implement 'dynamic assignment' of profiles, this object is not useful and should return noSuchName upon SNMP request.
OBJECT-TYPE    
  INTEGER 0..65535  

sdslLineAlarmConfProfileTable 1.3.6.1.4.1.927.1.13.1.1.11
This table contains information on the sdsl line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure the modem for a physical line
OBJECT-TYPE    
  SEQUENCE OF  
    SdslLineAlarmConfProfileEntry

sdslLineAlarmConfProfileEntry 1.3.6.1.4.1.927.1.13.1.1.11.1
Each entry consists of a list of parameters that represents the alarm configuration for one sdsl line. A profile is created in one step with all necessary parameter values and sdslLineAlarmConfProfileRowStatus set to createAndGo. This RowStatus object is also used to delete destroy profiles. Each entry is taken from the original Pairgain SDSL MIB called sdslAlarmSeverityEntry which provided: severity settings for SDSL alarms reporting and threshold settings for Errored Second(ES), Margin(MAR), Unavailable Seconds(UAS).
OBJECT-TYPE    
  SdslLineAlarmConfProfileEntry  

sdslLineAlarmConfProfileIndex 1.3.6.1.4.1.927.1.13.1.1.11.1.1
This object is used by the line alarm configuration table in order to identify a row of this table
OBJECT-TYPE    
  SdslLineProfileType  

sdslLOSWAlarmSetting 1.3.6.1.4.1.927.1.13.1.1.11.1.2
Sets the severity for Loss of Sync Word alarm.
OBJECT-TYPE    
  PgSdslAlarmSeverityMode  

sdslMarginThreshold 1.3.6.1.4.1.927.1.13.1.1.11.1.3
Sets the SDSL Margin threshold value.
OBJECT-TYPE    
  Byte  

sdslMarginAlarmSetting 1.3.6.1.4.1.927.1.13.1.1.11.1.4
Sets the severity for Margin threshold exceeded alarm.
OBJECT-TYPE    
  PgSdslAlarmSeverityMode  

sdslESThreshold 1.3.6.1.4.1.927.1.13.1.1.11.1.5
Sets the SDSL Errored Seconds threshold value.
OBJECT-TYPE    
  Byte  

sdslESAlarmSetting 1.3.6.1.4.1.927.1.13.1.1.11.1.6
Sets the severity for Errored Seconds threshold exceeded alarm.
OBJECT-TYPE    
  PgSdslAlarmSeverityMode  

sdslUASThreshold 1.3.6.1.4.1.927.1.13.1.1.11.1.7
Sets the SDSL Unavailable Seconds threshold value.
OBJECT-TYPE    
  Byte  

sdslUASAlarmSetting 1.3.6.1.4.1.927.1.13.1.1.11.1.8
Sets the severity for UAS threshold exceeded alarm.
OBJECT-TYPE    
  PgSdslAlarmSeverityMode  

sdslLineAlarmConfProfileRowStatus 1.3.6.1.4.1.927.1.13.1.1.11.1.9
This object is used to create a new row or modify or delete an existing row in this table. If the implementator of this MIB has choosen not to implement 'dynamic assignment' of profiles, this object is not useful and should return noSuchName upon SNMP request.
OBJECT-TYPE    
  RowStatus  

pgSdslModGenTable 1.3.6.1.4.1.927.1.13.1.1.12
This table provides general information about the SDSL modem. pgSdslModGenVersionNum: Contains the Modem software version number pgSdslModGenListNum: When used with the vendor number the list number provides a unique model number identifier for the modem. pgSdslModGenVendNum: A unique number given to every Pairgain product. pgSdslModGenFeatures A 32 bit flag that has bits set according to feature supported by the modem. pgSdslModGenSerialNum 16 bits, used with manufacturing date to give unique identifier for the modem. pgSdslModGenMfgDate 16 bit, used with the Serial number to give a unique identifier for the modem.
OBJECT-TYPE    
  SEQUENCE OF  
    PgSdslModGenEntry

pgSdslModGenEntry 1.3.6.1.4.1.927.1.13.1.1.12.1
Entries (one per port) for general modem information.
OBJECT-TYPE    
  PgSdslModGenEntry  

pgSdslModGenVersionNum 1.3.6.1.4.1.927.1.13.1.1.12.1.1
Identifies the software version number of the modem.
OBJECT-TYPE    
  Byte  

pgSdslModGenListNum 1.3.6.1.4.1.927.1.13.1.1.12.1.2
Identifies the list number of the modem.
OBJECT-TYPE    
  Byte  

pgSdslModGenVendNum 1.3.6.1.4.1.927.1.13.1.1.12.1.3
Identifies the vendor number of the modem. The vendor number is a Pair Gain product unique identifier.
OBJECT-TYPE    
  Byte  

pgSdslModGenFeatures 1.3.6.1.4.1.927.1.13.1.1.12.1.4
Contains the feature bytes from the modem.
OBJECT-TYPE    
  Integer32  

pgSdslModGenSerialNum 1.3.6.1.4.1.927.1.13.1.1.12.1.5
Contains the Serial number of the modem read from the modem's NVRAM.
OBJECT-TYPE    
  Short  

pgSdslModGenMfgDate 1.3.6.1.4.1.927.1.13.1.1.12.1.6
Contains the Manufacturing date of the modem read from the modem's NVRAM.
OBJECT-TYPE    
  Short  

pgSdslModStatTable 1.3.6.1.4.1.927.1.13.1.1.13
This table provides modem statistics gathered from the modem through EOC messages. These statistics correspond to a subset of those in the standard ifTable. Ethernet port statistics are given in the following objects: pgSdslModEthOperStatus: the status of the ethernet link. pgSdslModEthInOctets pgSdslModEthInUcastPkts pgSdslModEthInNUcastPkts pgSdslModEthInDiscards pgSdslModEthInErrors pgSdslModEthOutOctets pgSdslModEthOutUcastPkts pgSdslModEthOutNUcastPkts pgSdslModEthOutErrors SDSL port statistics are given in the following objects: pgSdslModDslInOctets pgSdslModDslInUcastPkts pgSdslModDslInNUcastPkts pgSdslModDslInDiscards pgSdslModDslInErrors pgSdslModDslOutOctets pgSdslModDslOutUcastPkts pgSdslModDslOutNUcastPkts pgSdslModDslOutErrors
OBJECT-TYPE    
  SEQUENCE OF  
    PgSdslModStatEntry

pgSdslModStatEntry 1.3.6.1.4.1.927.1.13.1.1.13.1
Entries (one per port) for the modem statistics.
OBJECT-TYPE    
  PgSdslModStatEntry  

pgSdslModEthOperStatus 1.3.6.1.4.1.927.1.13.1.1.13.1.1
Identifies the status of the modem's ethernet port. Up or Down
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3), unknown(4), dormant(5)  

pgSdslModEthInOctets 1.3.6.1.4.1.927.1.13.1.1.13.1.2
modem's Ethernet ifInOctet count
OBJECT-TYPE    
  Counter32  

pgSdslModEthInUcastPkts 1.3.6.1.4.1.927.1.13.1.1.13.1.3
modem's Ethernet ifInUcastPkts count
OBJECT-TYPE    
  Counter32  

pgSdslModEthInNUcastPkts 1.3.6.1.4.1.927.1.13.1.1.13.1.4
modem's Ethernet ifNUcastPkts count
OBJECT-TYPE    
  Counter32  

pgSdslModEthInDiscards 1.3.6.1.4.1.927.1.13.1.1.13.1.5
modem's Ethernet ifInDiscards count
OBJECT-TYPE    
  Counter32  

pgSdslModEthInErrors 1.3.6.1.4.1.927.1.13.1.1.13.1.6
modem's Ethernet ifInErrors count
OBJECT-TYPE    
  Counter32  

pgSdslModEthOutOctets 1.3.6.1.4.1.927.1.13.1.1.13.1.7
modem's Ethernet ifOutOctets count
OBJECT-TYPE    
  Counter32  

pgSdslModEthOutUcastPkts 1.3.6.1.4.1.927.1.13.1.1.13.1.8
modem's Ethernet ifOutUcastPkts count
OBJECT-TYPE    
  Counter32  

pgSdslModEthOutNUcastPkts 1.3.6.1.4.1.927.1.13.1.1.13.1.9
modem's Ethernet ifOutNUcastPkts count
OBJECT-TYPE    
  Counter32  

pgSdslModEthOutErrors 1.3.6.1.4.1.927.1.13.1.1.13.1.10
modem's Ethernet ifOutErrors count
OBJECT-TYPE    
  Counter32  

pgSdslModDslInOctets 1.3.6.1.4.1.927.1.13.1.1.13.1.11
modem's Dsl ifInOctets count
OBJECT-TYPE    
  Counter32  

pgSdslModDslInUcastPkts 1.3.6.1.4.1.927.1.13.1.1.13.1.12
modem's Dsl ifInUcastPkts count
OBJECT-TYPE    
  Counter32  

pgSdslModDslInNUcastPkts 1.3.6.1.4.1.927.1.13.1.1.13.1.13
modem's Dsl ifInNUcastPkts count
OBJECT-TYPE    
  Counter32  

pgSdslModDslInDiscards 1.3.6.1.4.1.927.1.13.1.1.13.1.14
modem's Dsl ifInDiscards count
OBJECT-TYPE    
  Counter32  

pgSdslModDslInErrors 1.3.6.1.4.1.927.1.13.1.1.13.1.15
modem's Dsl ifInErrors count
OBJECT-TYPE    
  Counter32  

pgSdslModDslOutOctets 1.3.6.1.4.1.927.1.13.1.1.13.1.16
modem's Dsl ifOutOctets count
OBJECT-TYPE    
  Counter32  

pgSdslModDslOutUcastPkts 1.3.6.1.4.1.927.1.13.1.1.13.1.17
modem's Dsl ifOutUcastPkts count
OBJECT-TYPE    
  Counter32  

pgSdslModDslOutNUcastPkts 1.3.6.1.4.1.927.1.13.1.1.13.1.18
modem's Dsl ifOutNUcastPkts count
OBJECT-TYPE    
  Counter32  

pgSdslModDslOutErrors 1.3.6.1.4.1.927.1.13.1.1.13.1.19
modem's Dsl ifOutErrors count
OBJECT-TYPE    
  Counter32  

Defined Objects

Byte  
INTEGER 0..255    

Short  
INTEGER 0..65535    

SdslLineProfileType  
INTEGER 0..65535    

PgSdslTimeStamp  
OCTET STRING SIZE(8)    

PgSdslAlarmSeverityMode  
INTEGER disable(1), enable(2), notAvailable(3)    

Sdsl15mPerformanceEntry  
SEQUENCE    
  Short as sdsl15mHistoryId  
  Short as sdsl15mESNet  
  Short as sdsl15mUASNet  
  Short as sdsl15mESCust  
  Short as sdsl15mUASCust  

Sdsl24hPerformanceEntry  
SEQUENCE    
  Short as sdsl24hHistoryId  
  Short as sdsl24hESNet  
  Short as sdsl24hUASNet  
  Short as sdsl24hESCust  
  Short as sdsl24hUASCust  

SdslCurr24hPerformanceEntry  
SEQUENCE    
  Short as sdslCurr24hESNet  
  Short as sdslCurr24hUASNet  
  Short as sdslCurr24hESCust  
  Short as sdslCurr24hUASCust  

SdslStatisticsEntry  
SEQUENCE    
  Byte as sdslTipRingReversal  
  Byte as sdslUpState  
  Byte as sdslMarginNet  
  Byte as sdslMarginHighNet  
  Byte as sdslMarginLowNet  
  Byte as sdslPulseAttenuationNet  
  Byte as sdslMarginCust  
  Byte as sdslMarginHighCust  
  Byte as sdslMarginLowCust  
  Byte as sdslPulseAttenuationCust  

SdslLineEntry  
SEQUENCE    
  SdslLineProfileType as sdslLineConfProfile  
  SdslLineProfileType as sdslLineAlarmConfProfile  

SdslAlarmEntry  
SEQUENCE    
  Byte as sdslMarginAlarmNet  
  Byte as sdslESAlarmNet  
  Byte as sdslUASAlarmNet  
  Byte as sdslMarginAlarmCust  
  Byte as sdslESAlarmCust  
  Byte as sdslUASAlarmCust  
  Byte as sdslLOSWAlarm  

SdslAlarmHistoryEntry  
SEQUENCE    
  PgSdslTimeStamp as sdslMarginAlarmFirst  
  PgSdslTimeStamp as sdslMarginAlarmLast  
  Short as sdslMarginAlarmCount  
  PgSdslTimeStamp as sdslESAlarmFirst  
  PgSdslTimeStamp as sdslESAlarmLast  
  Short as sdslESAlarmCount  
  PgSdslTimeStamp as sdslUASAlarmFirst  
  PgSdslTimeStamp as sdslUASAlarmLast  
  Short as sdslUASAlarmCount  
  PgSdslTimeStamp as sdslLOSWAlarmFirst  
  PgSdslTimeStamp as sdslLOSWAlarmLast  
  Short as sdslLOSWAlarmCount  

SdslLineConfProfileEntry  
SEQUENCE    
  SdslLineProfileType as sdslLineConfProfileIndex  
  INTEGER as sdslRateMode 1..32000  
  Short as sdslRemFeatures  
  INTEGER as sdslRate 1..32000  
  RowStatus as sdslLineConfProfileRowStatus  

SdslLineAlarmConfProfileEntry  
SEQUENCE    
  SdslLineProfileType as sdslLineAlarmConfProfileIndex  
  PgSdslAlarmSeverityMode as sdslLOSWAlarmSetting  
  Byte as sdslMarginThreshold  
  PgSdslAlarmSeverityMode as sdslMarginAlarmSetting  
  Byte as sdslESThreshold  
  PgSdslAlarmSeverityMode as sdslESAlarmSetting  
  Byte as sdslUASThreshold  
  PgSdslAlarmSeverityMode as sdslUASAlarmSetting  
  RowStatus as sdslLineAlarmConfProfileRowStatus  

PgSdslModGenEntry  
SEQUENCE    
  Byte as pgSdslModGenVersionNum  
  Byte as pgSdslModGenListNum  
  Byte as pgSdslModGenVendNum  
  Integer32 as pgSdslModGenFeatures  
  Short as pgSdslModGenSerialNum  
  Short as pgSdslModGenMfgDate  

PgSdslModStatEntry  
SEQUENCE    
  INTEGER as pgSdslModEthOperStatus  
  Counter32 as pgSdslModEthInOctets  
  Counter32 as pgSdslModEthInUcastPkts  
  Counter32 as pgSdslModEthInNUcastPkts  
  Counter32 as pgSdslModEthInDiscards  
  Counter32 as pgSdslModEthInErrors  
  Counter32 as pgSdslModEthOutOctets  
  Counter32 as pgSdslModEthOutUcastPkts  
  Counter32 as pgSdslModEthOutNUcastPkts  
  Counter32 as pgSdslModEthOutErrors  
  Counter32 as pgSdslModDslInOctets  
  Counter32 as pgSdslModDslInUcastPkts  
  Counter32 as pgSdslModDslInNUcastPkts  
  Counter32 as pgSdslModDslInDiscards  
  Counter32 as pgSdslModDslInErrors  
  Counter32 as pgSdslModDslOutOctets  
  Counter32 as pgSdslModDslOutUcastPkts  
  Counter32 as pgSdslModDslOutNUcastPkts  
  Counter32 as pgSdslModDslOutErrors