PANDATEL-AGENT-MIB

File: PANDATEL-AGENT-MIB.mib (7657 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212

Imported symbols

enterprises Counter IpAddress
Gauge TimeTicks DisplayString
PhysAddress OBJECT-TYPE

Defined Objects

pandatel 1.3.6.1.4.1.760
OBJECT IDENTIFIER    

mibs 1.3.6.1.4.1.760.1
OBJECT IDENTIFIER    

agent 1.3.6.1.4.1.760.1.10000
OBJECT IDENTIFIER    

agentGroup 1.3.6.1.4.1.760.1.10000.1
OBJECT IDENTIFIER    

agentNetAddress 1.3.6.1.4.1.760.1.10000.1.1
The administrative network address of this unit's agent, e.g. the IP address.
OBJECT-TYPE    
  IpAddress  

agentSubnetMask 1.3.6.1.4.1.760.1.10000.1.2
The administrative SubNet mask of this unit's agent.
OBJECT-TYPE    
  IpAddress  

agentPhysAddress 1.3.6.1.4.1.760.1.10000.1.3
The physical address of this unit's agent.
OBJECT-TYPE    
  PhysAddress  

agentMgmtAccessMode 1.3.6.1.4.1.760.1.10000.1.4
The mode this unit's agent can be reached.
OBJECT-TYPE    
  INTEGER other(1), inband(2), outband(3), proxy(4)  

agentHardwareRevision 1.3.6.1.4.1.760.1.10000.1.5
The hardware revision of this unit's agent. This is intended to be of the type like 1.00a, but can also contain any textual description.
OBJECT-TYPE    
  DisplayString  

agentSoftwareRevision 1.3.6.1.4.1.760.1.10000.1.6
The software revision of this unit's agent. This is intended to be of the type like 1.00a, but can also contain any textual description.
OBJECT-TYPE    
  DisplayString  

agentTrapReceiverTable 1.3.6.1.4.1.760.1.10000.1.7
This entity's Trap Receiver Table.
OBJECT-TYPE    
  SEQUENCE OF  
    AgentTrapReceiverTableEntry

agTrapReceiverTableEntry 1.3.6.1.4.1.760.1.10000.1.7.1
One entry in this entity's Trap Receiver Table, consisting of the trap receiver's IP address and the community string to be used with it.
OBJECT-TYPE    
  AgentTrapReceiverTableEntry  

agTrapReceiverNetAddress 1.3.6.1.4.1.760.1.10000.1.7.1.1
The network address of this trap receiver, e.g. the IP Address.
OBJECT-TYPE    
  IpAddress  

agTrapReceiverTrapCommunity 1.3.6.1.4.1.760.1.10000.1.7.1.2
The community string used for traps to this receiver.
OBJECT-TYPE    
  DisplayString  

agTrapReceiverType 1.3.6.1.4.1.760.1.10000.1.7.1.3
All entries return the value 1 (valid) for this object. Setting this object to the value 2 (invalid) deletes the entry from the trap receiver table.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

agentSecurityTable 1.3.6.1.4.1.760.1.10000.1.8
This entity's Security Table.
OBJECT-TYPE    
  SEQUENCE OF  
    AgentSecurityTableEntry

agSecTableEntry 1.3.6.1.4.1.760.1.10000.1.8.1
One entry in this entity's security table, consisting of the security level and the community string to be used with it.
OBJECT-TYPE    
  AgentSecurityTableEntry  

agSecSecurityLevel 1.3.6.1.4.1.760.1.10000.1.8.1.1
The security level that is indicated by using the security community string.
OBJECT-TYPE    
  INTEGER read-only-sysgroup(1), read-all-mgmt-objs(2), standard-mgmt-access(3), administrator-access(4), high-security-access(5)  

agSecCommunity 1.3.6.1.4.1.760.1.10000.1.8.1.2
The community string used for identification of the desired security level.
OBJECT-TYPE    
  DisplayString  

agentMgmtSecurity 1.3.6.1.4.1.760.1.10000.1.9
OBJECT IDENTIFIER    

agentAuthRestrictMode 1.3.6.1.4.1.760.1.10000.1.9.1
Restricting management authorization means that only snmp requests from members of the trap receiver table will be accepted. Requests from other sources will instead cause an authentication trap, if enabled. When not restricted, snmp requests from any manager who uses a valid community will be accepted, although traps will be sent only to those destinations that are included in the trap receiver table.
OBJECT-TYPE    
  INTEGER other(1), notRestricted(2), restricted(3)  

Defined Objects

AgentTrapReceiverTableEntry  
SEQUENCE    
  IpAddress as agTrapReceiverNetAddress  
  DisplayString as agTrapReceiverTrapCommunity  
  INTEGER as agTrapReceiverType  

AgentSecurityTableEntry  
SEQUENCE    
  INTEGER as agSecSecurityLevel  
  DisplayString as agSecCommunity