PCUBE-SE-MIB

File: PCUBE-SE-MIB.mib (139885 bytes)

Imported modules

PCUBE-SMI SNMPv2-TC SNMPv2-SMI
SNMPv2-CONF SNMP-FRAMEWORK-MIB

Imported symbols

pcubeWorkgroup pcubeModules TEXTUAL-CONVENTION
RowStatus MODULE-IDENTITY OBJECT-TYPE
Unsigned32 IpAddress TimeTicks
NOTIFICATION-TYPE Counter64 Integer32
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP
SnmpAdminString

Defined Objects

pcubeSeMIB 1.3.6.1.4.1.5655.2.3
Main SNMP MIB for Cisco's SCE OS products such as SCE2000 and SE100. This MIB provides configuration and runtime status for chassis, control modules, and line modules on the SCOS systems.
MODULE-IDENTITY    

pcubeSeConformance 1.3.6.1.4.1.5655.2.3.1
OBJECT IDENTIFIER    

pcubeSeGroups 1.3.6.1.4.1.5655.2.3.1.1
OBJECT IDENTIFIER    

pcubeSystemGroup 1.3.6.1.4.1.5655.2.3.1.1.1
System related inforamation.
OBJECT-GROUP    

pcubeChassisGroup 1.3.6.1.4.1.5655.2.3.1.1.2
Chassis related information.
OBJECT-GROUP    

pcuebModuleGroup 1.3.6.1.4.1.5655.2.3.1.1.3
Module related information.
OBJECT-GROUP    

pcubeLinkGroup 1.3.6.1.4.1.5655.2.3.1.1.4
Link related information.
OBJECT-GROUP    

pcubeDiskGroup 1.3.6.1.4.1.5655.2.3.1.1.5
Disk related information.
OBJECT-GROUP    

pcubeRdrFormatterGroup 1.3.6.1.4.1.5655.2.3.1.1.6
RDR-Formatter related information.
OBJECT-GROUP    

pcubeLoggerGroup 1.3.6.1.4.1.5655.2.3.1.1.7
Logger related information.
OBJECT-GROUP    

pcubeSubscribersGroup 1.3.6.1.4.1.5655.2.3.1.1.8
Subscriber related information.
OBJECT-GROUP    

pcubeTrafficProcessorGroup 1.3.6.1.4.1.5655.2.3.1.1.9
Traffic processors related information.
OBJECT-GROUP    

pcubePortGroup 1.3.6.1.4.1.5655.2.3.1.1.10
Ports related information.
OBJECT-GROUP    

pcubeTxQueuesGroup 1.3.6.1.4.1.5655.2.3.1.1.11
Tx queue related information
OBJECT-GROUP    

pcubeGlobalControllersGroup 1.3.6.1.4.1.5655.2.3.1.1.12
Global controllers related information.
OBJECT-GROUP    

pcubeApplicationGroup 1.3.6.1.4.1.5655.2.3.1.1.13
Application related information.
OBJECT-GROUP    

pcubeTrafficCountersGroup 1.3.6.1.4.1.5655.2.3.1.1.14
Traffic counter related information.
OBJECT-GROUP    

pcubeAttackGroup 1.3.6.1.4.1.5655.2.3.1.1.15
Attacks related information.
OBJECT-GROUP    

pcubeVasTrafficForwardingGroup 1.3.6.1.4.1.5655.2.3.1.1.16
VAS traffic forwarding related information.
OBJECT-GROUP    

pcubeMplsVpnAutoLearnGroup 1.3.6.1.4.1.5655.2.3.1.1.17
MPLS VPN auto learning related information.
OBJECT-GROUP    

pcubeTrapObjectsGroup 1.3.6.1.4.1.5655.2.3.1.1.18
Notifications' objects group.
OBJECT-GROUP    

pcubeSeCompliances 1.3.6.1.4.1.5655.2.3.1.2
OBJECT IDENTIFIER    

pcubeCompliance 1.3.6.1.4.1.5655.2.3.1.2.1
A compliance statement defined in this MIB module, for SCE SNMP agents. with old deprectated groups. This compliance includes deprecated groups.
MODULE-COMPLIANCE    

pcubeComplianceRev1 1.3.6.1.4.1.5655.2.3.1.2.2
A compliance statement defined in this MIB module, for SCE SNMP agents.
MODULE-COMPLIANCE    

pcubeSeEventsGroup 1.3.6.1.4.1.5655.2.3.1.3
Pcube notifications. Contains deprecated objects.
NOTIFICATION-GROUP    

pcubeSeEventsGroupRev1 1.3.6.1.4.1.5655.2.3.1.4
Pcube notifications.
NOTIFICATION-GROUP    

pcubeSeEvents 1.3.6.1.4.1.5655.4.0
OBJECT IDENTIFIER    

operationalStatusOperationalTrap 1.3.6.1.4.1.5655.4.0.1
OperationalStatusOperational notification signifies that the agent entity has detected the sysOperationalStatus object in this MIB has changed to 'operational(3)'.
NOTIFICATION-TYPE    
  sysOperationalStatus  

operationalStatusWarningTrap 1.3.6.1.4.1.5655.4.0.2
OperationalStatusWarning notification signifies that the agent entity has detected the sysOperationalStatus object in this MIB has changed to 'warning(4)'.
NOTIFICATION-TYPE    
  sysOperationalStatus  

operationalStatusFailureTrap 1.3.6.1.4.1.5655.4.0.3
OperationalStatusFailure notification signifies that the agent entity has detected the sysOperationalStatus object in this MIB has changed to 'failure(5)'.
NOTIFICATION-TYPE    
  sysOperationalStatus  

systemResetTrap 1.3.6.1.4.1.5655.4.0.4
A systemReset notification signifies that the agent entity is about to reset itself either per user's request or due to a fatal event.
NOTIFICATION-TYPE    

chassisTempAlarmOnTrap 1.3.6.1.4.1.5655.4.0.5
A chassisTempAlarmOn notification signifies that the agent entity has detected the chassisTempAlarm object in this MIB has changed to the 'on(3)' state (temperature is too high).
NOTIFICATION-TYPE    
  pchassisTempAlarm  

chassisTempAlarmOffTrap 1.3.6.1.4.1.5655.4.0.6
A chassisTempAlarmOff notification signifies that the agent entity has detected the chassisTempAlarm object in this MIB has changed to the 'off(2)' state (temperature level is back to normal).
NOTIFICATION-TYPE    
  pchassisTempAlarm  

chassisVoltageAlarmOnTrap 1.3.6.1.4.1.5655.4.0.7
A chassisVoltageAlarmOn notification signifies that the agent entity has detected the chassisVoltageAlarm object in this MIB has changed to the 'on(3)' state (voltage level is too high).
NOTIFICATION-TYPE    
  pchassisVoltageAlarm  

chassisFansAlarmOnTrap 1.3.6.1.4.1.5655.4.0.8
A chassisFanStatusFailure notification signifies that the agent entity has detected the chassisFansAlarm object in this MIB has changed to the 'on(3)' state.
NOTIFICATION-TYPE    
  pchassisFansAlarm  

chassisPowerSupplyAlarmOnTrap 1.3.6.1.4.1.5655.4.0.9
A chassisPsuStatusFailure notification signifies that the agent entity has detected the chassisPowerSupplyAlarm object in this MIB has changed to the 'on(3)' state.
NOTIFICATION-TYPE    
  pchassisPowerSupplyAlarm  

rdrActiveConnectionTrap 1.3.6.1.4.1.5655.4.0.10
RdrConnectionDestTypeActive notification signifies that the agent entity has detected the rdrFormatterDestStatus object in this MIB has changed to the 'active(2)' state.
NOTIFICATION-TYPE    
  rdrFormatterDestIPAddr  
  rdrFormatterDestStatus  

rdrNoActiveConnectionTrap 1.3.6.1.4.1.5655.4.0.11
A rdrNoActiveConnection notification signifies that the agent entity has detected there is no active connection between the RDR-formatter and any Data Collector.
NOTIFICATION-TYPE    

rdrConnectionUpTrap 1.3.6.1.4.1.5655.4.0.12
RdrConnectionStatusUp notification signifies that the agent entity has detected the rdrFormatterDestConnectionStatus object in this MIB has changed to 'up(2)'.
NOTIFICATION-TYPE    
  rdrFormatterDestIPAddr  
  rdrFormatterDestConnectionStatus  

rdrConnectionDownTrap 1.3.6.1.4.1.5655.4.0.13
RdrConnectionStatusDown notification signifies that the agent entity has detected the rdrFormatterDestConnectionStatus object in this MIB has changed to 'down(3)'.
NOTIFICATION-TYPE    
  rdrFormatterDestIPAddr  
  rdrFormatterDestConnectionStatus  

telnetSessionStartedTrap 1.3.6.1.4.1.5655.4.0.14
Replaced by the more generic sessionStartedTrap.
NOTIFICATION-TYPE    

telnetSessionEndedTrap 1.3.6.1.4.1.5655.4.0.15
Replaced by the more generic sessionEndedTrap.
NOTIFICATION-TYPE    

telnetSessionDeniedAccessTrap 1.3.6.1.4.1.5655.4.0.16
Replaced by the more generic sessionDeniedAccessTrap.
NOTIFICATION-TYPE    

telnetSessionBadLoginTrap 1.3.6.1.4.1.5655.4.0.17
Replaced by the more generic sessionBadLoginTrap.
NOTIFICATION-TYPE    

loggerUserLogIsFullTrap 1.3.6.1.4.1.5655.4.0.18
A loggerUserLogIsFull notification signifies that the agent entity has detected the User log file is full. In such case the agent entity rolls to the next file.
NOTIFICATION-TYPE    

sntpClockDriftWarnTrap 1.3.6.1.4.1.5655.4.0.19
An sntpClockDriftWarn notification signifies that the entity's SNTP agent did not receive time update for a long period, this may cause a time drift.
NOTIFICATION-TYPE    

linkModeBypassTrap 1.3.6.1.4.1.5655.4.0.20
A linkModeBypass notification signifies that the agent entity has detected that the linkOperMode object in this MIB has changed to 'bypass(2)'.
NOTIFICATION-TYPE    
  linkOperMode  

linkModeForwardingTrap 1.3.6.1.4.1.5655.4.0.21
A linkModeForwarding notification signifies that the agent entity has detected that the linkOperMode object in this MIB has changed to 'forwarding(3)'.
NOTIFICATION-TYPE    
  linkOperMode  

linkModeCutoffTrap 1.3.6.1.4.1.5655.4.0.22
A linkModeCutoff notification signifies that the agent entity has detected that the linkOperMode object in this MIB has changed to 'cutoff(4)'.
NOTIFICATION-TYPE    
  linkOperMode  

pcubeSeEventGenericString1 1.3.6.1.4.1.5655.4.0.23
Temporary string used for traps. Always returns an empty string.
OBJECT-TYPE    
  SnmpAdminString  

pcubeSeEventGenericString2 1.3.6.1.4.1.5655.4.0.24
Temporary string used for traps. Always returns an empty string.
OBJECT-TYPE    
  SnmpAdminString  

moduleAttackFilterActivatedTrap 1.3.6.1.4.1.5655.4.0.25
A moduleAttackFilterActivated notification signifies that the agent entity's attack filter module has activated a filter. The pcubeSeEventGenericString1 is the type of attack-filter, which was activated.
NOTIFICATION-TYPE    
  pmoduleIndex  
  pcubeSeEventGenericString1  

moduleAttackFilterDeactivatedTrap 1.3.6.1.4.1.5655.4.0.26
A portAttackFilterDeactivated notification signifies that the agent entity's attack filter module has removed a filter that was previously activated. The pcubeSeEventGenericString1 is the attack-filter type, which was sent in the corresponding moduleAttackFilterActivatedTrap. the pcubeSeEventGenericString2 is the reason for deactivating the filter.
NOTIFICATION-TYPE    
  pmoduleIndex  
  pcubeSeEventGenericString1  
  pcubeSeEventGenericString2  

moduleEmAgentGenericTrap 1.3.6.1.4.1.5655.4.0.27
A generic notification used by the P-Cube EM agent. pcubeSeEventGenericString1 specifies what notification is it, and pcubeSeEventGenericString2 is the relevant parameter.
NOTIFICATION-TYPE    
  pmoduleIndex  
  pcubeSeEventGenericString1  
  pcubeSeEventGenericString2  

linkModeSniffingTrap 1.3.6.1.4.1.5655.4.0.28
A linkModeSniffing notification signifies that the agent entity has detected that the linkOperMode object in this MIB has changed to 'sniffing(5)'.
NOTIFICATION-TYPE    
  linkOperMode  

moduleRedundancyReadyTrap 1.3.6.1.4.1.5655.4.0.29
A moduleRedundancyReady notification signifies that the module was able to connect and synchronize with a redundant entity, and is now ready to handle fail-over if needed.
NOTIFICATION-TYPE    
  pmoduleIndex  
  pmoduleOperStatus  

moduleRedundantConfigurationMismatchTrap 1.3.6.1.4.1.5655.4.0.30
A moduleRedundantConfigurationMismatch notification signifies that the module was not able to synchronize with a redundant entity, due to a essential configuration parameters that are do not match between the module and the redundant entity.
NOTIFICATION-TYPE    
  pmoduleIndex  

moduleLostRedundancyTrap 1.3.6.1.4.1.5655.4.0.31
A moduleLostRedundancy notification signifies that the module has lost the ability to perform the fail-over procedure.
NOTIFICATION-TYPE    
  pmoduleIndex  
  pmoduleOperStatus  

moduleSmConnectionDownTrap 1.3.6.1.4.1.5655.4.0.32
A moduleSmConnectionDown notification signifies that the module's virtual connection to the subscriber manager is broken.
NOTIFICATION-TYPE    
  pmoduleIndex  

moduleSmConnectionUpTrap 1.3.6.1.4.1.5655.4.0.33
A moduleSmConnectionUp notification signifies that the module's virtual connection to the subscriber manager is up and working.
NOTIFICATION-TYPE    
  pmoduleIndex  

moduleOperStatusChangeTrap 1.3.6.1.4.1.5655.4.0.34
A moduleOperStatusChangeTrap notification signifies that the moduleOperStatus has changed its value.
NOTIFICATION-TYPE    
  pmoduleIndex  
  pmoduleOperStatus  

portOperStatusChangeTrap 1.3.6.1.4.1.5655.4.0.35
A portOperStatusChangeTrap notification signifies that the portOperStatus object of the portIndex has changed its value, i.e., the link was forced down or the force down was released.
NOTIFICATION-TYPE    
  pmoduleIndex  
  pportIndex  
  pportOperStatus  

chassisLineFeedAlarmOnTrap 1.3.6.1.4.1.5655.4.0.36
A chassisLineFeedAlarmOn notification signifies that the agent entity has detected the chassisLineFeed object in this MIB has changed to the 'on(3)' state.
NOTIFICATION-TYPE    
  pchassisLineFeedAlarm  

rdrFormatterCategoryDiscardingReportsTrap 1.3.6.1.4.1.5655.4.0.37
rdrCategoryDiscardingReportsTrap notification signifies that the agent entity has detected that reports send to this category are being discarded. The rdrFormatterCategoryNumReportsDiscarded object in this MIB is counting the amount of discarded reports.
NOTIFICATION-TYPE    
  rdrFormatterCategoryIndex  

rdrFormatterCategoryStoppedDiscardingReportsTrap 1.3.6.1.4.1.5655.4.0.38
rdrCategoryStoppedDiscardingReportsTrap notification signifies that the agent entity has detected that reports send to this category are not being discarded any more. The rdrFormatterCategoryNumReportsDiscarded object in this MIB is counting the amount of discarded reports.
NOTIFICATION-TYPE    
  rdrFormatterCategoryIndex  

sessionStartedTrap 1.3.6.1.4.1.5655.4.0.39
A sessionStarted notification signifies that the agent entity has accepted a new session. The pcubeSeEventGenericString1 is the session type (telnet/SSH) and client IP address.
NOTIFICATION-TYPE    
  pcubeSeEventGenericString1  

sessionEndedTrap 1.3.6.1.4.1.5655.4.0.40
A sessionEnded notification signifies that the agent entity has detected end of a session. The pcubeSeEventGenericString1 is the session type (telnet/SSH) and client IP address.
NOTIFICATION-TYPE    
  pcubeSeEventGenericString1  

sessionDeniedAccessTrap 1.3.6.1.4.1.5655.4.0.41
A sessionDeniedAccess notification signifies that the agent entity has refused a session from unauthorized source. The pcubeSeEventGenericString1 is the session type (telnet/SSH) and client IP address.
NOTIFICATION-TYPE    

sessionBadLoginTrap 1.3.6.1.4.1.5655.4.0.42
A sessionBadLogin notification signifies that the agent entity has detected attempt to login with a wrong password. The pcubeSeEventGenericString1 is the session type (telnet/SSH) and client IP address.
NOTIFICATION-TYPE    

illegalSubscriberMappingTrap 1.3.6.1.4.1.5655.4.0.43
A illegalSubscriberMappingTrap notification signifies that some external entity has attempted to create illegal or inconsistent subscriber mappings. The pcubeSeEventGenericString1 contains a message describing the problem.
NOTIFICATION-TYPE    
  pmoduleIndex  
  pcubeSeEventGenericString1  

loggerLineAttackLogFullTrap 1.3.6.1.4.1.5655.4.0.44
Signifies that the agent entity has detected the line-attack log file is full. In such case the agent entity rolls to the next file.
NOTIFICATION-TYPE    

vasServerOpertionalStatusChangeTrap 1.3.6.1.4.1.5655.4.0.45
Signifies that the agent entity has detected that the vas server operational status has changed.
NOTIFICATION-TYPE    
  pmoduleIndex  
  vasServerIndex  
  vasServerId  
  vasServerOperStatus  

pullRequestNumber 1.3.6.1.4.1.5655.4.0.46
Used only for traps to signify the number of pull requests issued so far for the anonymous subscriber given in the pullRequestRetryFailedTrap containing notification. A direct get will always returns 0.
OBJECT-TYPE    
  Integer32 1..65535  

pullRequestRetryFailedTrap 1.3.6.1.4.1.5655.4.0.47
Signifies that an unknown subscriber wasn't identified after a certain number of pull requests. The value of pcubeSeEventGenericString1 is the subscriber id and the pullRequestNumber is the number of pull requests made on this sub.
NOTIFICATION-TYPE    
  pcubeSeEventGenericString1  
  pullRequestNumber  

mplsVpnTotalHWMappingsThresholdExceededTrap 1.3.6.1.4.1.5655.4.0.48
Sent when the value of mplsVpnCurrentHWMappings exceeds the allowed threshold.
NOTIFICATION-TYPE    
  mplsVpnCurrentHWMappings  

pcubeSEObjs 1.3.6.1.4.1.5655.4.1
OBJECT IDENTIFIER    

systemGrp 1.3.6.1.4.1.5655.4.1.1
OBJECT IDENTIFIER    

sysOperationalStatus 1.3.6.1.4.1.5655.4.1.1.1
Indicates the operational status of the system.
OBJECT-TYPE    
  INTEGER other(1), boot(2), operational(3), warning(4), failure(5)  

sysFailureRecovery 1.3.6.1.4.1.5655.4.1.1.2
Indicates if the system should enter a Failure mode after abnormal boot.
OBJECT-TYPE    
  INTEGER other(1), operational(2), nonOperational(3)  

sysVersion 1.3.6.1.4.1.5655.4.1.1.3
The system version.
OBJECT-TYPE    
  SnmpAdminString  

pchassisGrp 1.3.6.1.4.1.5655.4.1.2
OBJECT IDENTIFIER    

pchassisSysType 1.3.6.1.4.1.5655.4.1.2.1
The chassis system type.
OBJECT-TYPE    
  INTEGER other(1), sce1000(2), se100(3), sce2000(4)  

pchassisPowerSupplyAlarm 1.3.6.1.4.1.5655.4.1.2.2
Indicates if the power supply to the chassis is normal. If the status is not 'ok' it means that one or more power supplies are not functional.
OBJECT-TYPE    
  INTEGER other(1), off(2), on(3)  

pchassisFansAlarm 1.3.6.1.4.1.5655.4.1.2.3
Indicates if all the fans on the chassis are functional.
OBJECT-TYPE    
  INTEGER other(1), off(2), on(3)  

pchassisTempAlarm 1.3.6.1.4.1.5655.4.1.2.4
The chassis temperature alarm status.
OBJECT-TYPE    
  INTEGER other(1), off(2), on(3)  

pchassisVoltageAlarm 1.3.6.1.4.1.5655.4.1.2.5
The chassis internal voltage alarm status. If the alarm is 'on' it indicates that the voltage level of one or more HW units is not in the normal range.
OBJECT-TYPE    
  INTEGER other(1), off(2), on(3)  

pchassisNumSlots 1.3.6.1.4.1.5655.4.1.2.6
Indicates the number of slots in the chassis available for plug-in modules. This number counts slots that are already occupied as well as empty slots.
OBJECT-TYPE    
  Integer32 0..255  

pchassisSlotConfig 1.3.6.1.4.1.5655.4.1.2.7
An indication of which slots in the chassis have modules inserted. This is an integer value with bits set to indicate configured modules. It can be interpreted as a sum of f(x) as x goes from 1 to the number of slots, where f(x) = 0 for no module inserted and f(x) = exp(2, x-1) for a module inserted.
OBJECT-TYPE    
  Integer32 0..65535  

pchassisPsuType 1.3.6.1.4.1.5655.4.1.2.8
Indicates the type of the power supplies.
OBJECT-TYPE    
  INTEGER other(1), ac(2), dc(3)  

pchassisLineFeedAlarm 1.3.6.1.4.1.5655.4.1.2.10
Indicates if the line feed to the chassis is normal. If the status is not 'ok' it means that one or more line feeds are not connected or have no power.
OBJECT-TYPE    
  INTEGER other(1), off(2), on(3)  

pmoduleGrp 1.3.6.1.4.1.5655.4.1.3
OBJECT IDENTIFIER    

pmoduleTable 1.3.6.1.4.1.5655.4.1.3.1
A list of module entries. The number of entries is the number of modules in the chassis.
OBJECT-TYPE    
  SEQUENCE OF  
    PmoduleEntry

pmoduleEntry 1.3.6.1.4.1.5655.4.1.3.1.1
Entry containing information about one module in the chassis.
OBJECT-TYPE    
  PmoduleEntry  

pmoduleIndex 1.3.6.1.4.1.5655.4.1.3.1.1.1
A unique value for each module within the chassis.
OBJECT-TYPE    
  Integer32 1..255  

pmoduleType 1.3.6.1.4.1.5655.4.1.3.1.1.2
The type of module.
OBJECT-TYPE    
  INTEGER other(1), gbe2Module(2), fe2Module(3), gbe4Module(4), fe4Module(5), oc124Module(6), fe8Module(7)  

pmoduleNumTrafficProcessors 1.3.6.1.4.1.5655.4.1.3.1.1.3
The number of traffic processors supported by this module.
OBJECT-TYPE    
  Integer32 0..255  

pmoduleSlotNum 1.3.6.1.4.1.5655.4.1.3.1.1.4
This value is determined by the chassis slot number where this module is located. Valid entries are 1 to the value of chassisNumSlots.
OBJECT-TYPE    
  Integer32 1..255  

pmoduleHwVersion 1.3.6.1.4.1.5655.4.1.3.1.1.5
The hardware version of the module.
OBJECT-TYPE    
  SnmpAdminString  

pmoduleNumPorts 1.3.6.1.4.1.5655.4.1.3.1.1.6
The number of ports supported by this module.
OBJECT-TYPE    
  Integer32 0..255  


pmoduleConnectionMode 1.3.6.1.4.1.5655.4.1.3.1.1.8
Indicates the connection mode of a module.
OBJECT-TYPE    
  INTEGER other(1), inline(2), receiveOnly(3), inlineCascade(4), receiveOnlyCascade(5)  

pmoduleSerialNumber 1.3.6.1.4.1.5655.4.1.3.1.1.9
Indicates the serial number of the module.
OBJECT-TYPE    
  SnmpAdminString  

pmoduleUpStreamAttackFilteringTime 1.3.6.1.4.1.5655.4.1.3.1.1.10
Indicates the accumulated time which attack up-stream traffic was filtered.
OBJECT-TYPE    
  TimeTicks  

pmoduleUpStreamLastAttackFilteringTime 1.3.6.1.4.1.5655.4.1.3.1.1.11
Indicates the time since the previous attack was filtered in the up-stream traffic.
OBJECT-TYPE    
  TimeTicks  

pmoduleDownStreamAttackFilteringTime 1.3.6.1.4.1.5655.4.1.3.1.1.12
Indicates the accumulated time which attack down-stream traffic was filtered.
OBJECT-TYPE    
  TimeTicks  

pmoduleDownStreamLastAttackFilteringTime 1.3.6.1.4.1.5655.4.1.3.1.1.13
Indicates the time since the previous attack was filtered in the down-stream traffic.
OBJECT-TYPE    
  TimeTicks  

pmoduleAttackObjectsClearTime 1.3.6.1.4.1.5655.4.1.3.1.1.14
Indicates the time since the attack objects were cleared. Writing a 0 to this object causes the counters to be cleared.
OBJECT-TYPE    
  TimeTicks  

pmoduleAdminStatus 1.3.6.1.4.1.5655.4.1.3.1.1.15
Indicates configuration of a module in respect to whether the module should handle traffic.
OBJECT-TYPE    
  INTEGER other(1), primary(2), secondary(3)  

pmoduleOperStatus 1.3.6.1.4.1.5655.4.1.3.1.1.16
Indicates current module's role in respect to whether the module handles traffic.
OBJECT-TYPE    
  INTEGER other(1), active(2), standby(3)  

linkGrp 1.3.6.1.4.1.5655.4.1.4
OBJECT IDENTIFIER    

linkTable 1.3.6.1.4.1.5655.4.1.4.1
The Link table provides information regarding the configuration and status of the links that pass through the SE and carry inband traffic. The number of entries in this table is determined by the number of modules in the chassis and the number of links on each module.
OBJECT-TYPE    
  SEQUENCE OF  
    LinkEntry

linkEntry 1.3.6.1.4.1.5655.4.1.4.1.1
Entry containing information about the Link.
OBJECT-TYPE    
  LinkEntry  

linkModuleIndex 1.3.6.1.4.1.5655.4.1.4.1.1.1
An index value that uniquely identifies the module where this link is located.
OBJECT-TYPE    
  Integer32 1..255  

linkIndex 1.3.6.1.4.1.5655.4.1.4.1.1.2
An index value that uniquely identifies this link within a module. Valid entries are 1 to the value of moduleNumLinks for this module.
OBJECT-TYPE    
  Integer32 1..255  

linkAdminModeOnActive 1.3.6.1.4.1.5655.4.1.4.1.1.3
The desired mode of the link when the module's operating status is Active and the module is not in boot or failure. The possible modes are bypass, forwarding and sniffing. In bypass mode the traffic is forwarded from one port to the other using an internal splitter. In forwarding mode the traffic is forwarded through the internal hardware and software modules of the SE. In sniffing mode the traffic is passed in the same manner as in bypass mode, however a copy of the traffic is made and analyzed internally in the box.
OBJECT-TYPE    
  LinkModeType  

linkAdminModeOnFailure 1.3.6.1.4.1.5655.4.1.4.1.1.4
The desired mode of the link when the system's operational status is Failure. The possible modes are Bypass and Cutoff. In Bypass mode the traffic is forwarded from one port to the other using an internal splitter. In Cutoff mode the traffic is dropped by the SE.
OBJECT-TYPE    
  LinkModeType  

linkOperMode 1.3.6.1.4.1.5655.4.1.4.1.1.5
The operational mode of the link. In Bypass mode the traffic is forwarded from one port to the other using an internal splitter. In Forwarding mode the traffic is forwarded through the internal software and hardware modules of the SCE. In Sniffing mode the traffic is forwarded in the same manner as in Bypass mode, however the traffic is passed through the internal software and hardware modules of the SCE for analyzing. in Cutoff mode the traffic is dropped by the SCE platform.
OBJECT-TYPE    
  LinkModeType  

linkStatusReflectionEnable 1.3.6.1.4.1.5655.4.1.4.1.1.6
Indicates if failure of the physical link on one i/f should trigger the failure of the link on the other i/f.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

linkSubscriberSidePortIndex 1.3.6.1.4.1.5655.4.1.4.1.1.7
An index value that uniquely identifies this link with its related port that is connected to the subscriber side.
OBJECT-TYPE    
  Integer32 1..255  

linkNetworkSidePortIndex 1.3.6.1.4.1.5655.4.1.4.1.1.8
An index value that uniquely identifies this link with its related port that is connected to the network side.
OBJECT-TYPE    
  Integer32 1..255  

diskGrp 1.3.6.1.4.1.5655.4.1.5
OBJECT IDENTIFIER    

diskNumUsedBytes 1.3.6.1.4.1.5655.4.1.5.1
The number of used bytes.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

diskNumFreeBytes 1.3.6.1.4.1.5655.4.1.5.2
The number of free bytes.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

rdrFormatterGrp 1.3.6.1.4.1.5655.4.1.6
OBJECT IDENTIFIER    

rdrFormatterEnable 1.3.6.1.4.1.5655.4.1.6.1
Indicates whether the RDR-formatter is enabled or disabled. When the RDR-formatter is enabled, it sends the reports it gets from the traffic processors to the Data Collector as defined in the rdrFormatterDestTable.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

rdrFormatterDestTable 1.3.6.1.4.1.5655.4.1.6.2
The RDR-formatter destinations table (0 to 3 entries). This table lists the addresses of Data Collectors. If the RDR-formatter is enabled, the destination with the highest priority that a TCP connection to it can be established would receive the reports generated by the traffic processors.
OBJECT-TYPE    
  SEQUENCE OF  
    RdrFormatterDestEntry

rdrFormatterDestEntry 1.3.6.1.4.1.5655.4.1.6.2.1
A destination table entry.
OBJECT-TYPE    
  RdrFormatterDestEntry  

rdrFormatterDestIPAddr 1.3.6.1.4.1.5655.4.1.6.2.1.1
The IP address of a Data Collector.
OBJECT-TYPE    
  IpAddress  

rdrFormatterDestPort 1.3.6.1.4.1.5655.4.1.6.2.1.2
The TCP port on which the Data Collector listens.
OBJECT-TYPE    
  Integer32 1..65535  

rdrFormatterDestPriority 1.3.6.1.4.1.5655.4.1.6.2.1.3
The priority given to the Data Collector. The active Data Collector is the Data Collector with the highest priority and a TCP connection that is up.
OBJECT-TYPE    
  Integer32 1..100  

rdrFormatterDestStatus 1.3.6.1.4.1.5655.4.1.6.2.1.4
In 'redundancy(2)' and in 'simpleLoadBalancing(3)' rdrFormatterForwardingMode there can be only one 'active' destination, which is where the reports are currently being sent to. In 'multicast(4)' modes all destinations will receive the active(2) status.
OBJECT-TYPE    
  INTEGER other(1), active(2), standby(3)  

rdrFormatterDestConnectionStatus 1.3.6.1.4.1.5655.4.1.6.2.1.5
Indicates the status of TCP connection to this destination.
OBJECT-TYPE    
  INTEGER other(1), up(2), down(3)  

rdrFormatterDestNumReportsSent 1.3.6.1.4.1.5655.4.1.6.2.1.6
Indicates the number of reports sent by the RDR-formatter to this destination.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

rdrFormatterDestNumReportsDiscarded 1.3.6.1.4.1.5655.4.1.6.2.1.7
Indicates the number of reports dropped by the RDR-formatter on this destination.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

rdrFormatterDestReportRate 1.3.6.1.4.1.5655.4.1.6.2.1.8
Indicates the rate of the reports (in reports per second) currently sent to this destination.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

rdrFormatterDestReportRatePeak 1.3.6.1.4.1.5655.4.1.6.2.1.9
Indicates the maximum report rate sent to this destination.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

rdrFormatterDestReportRatePeakTime 1.3.6.1.4.1.5655.4.1.6.2.1.10
Indicates the time since the rdrFormatterDestReportRatePeak value occurred.
OBJECT-TYPE    
  TimeTicks  

rdrFormatterNumReportsSent 1.3.6.1.4.1.5655.4.1.6.3
Indicates the number of reports sent by the RDR-formatter.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

rdrFormatterNumReportsDiscarded 1.3.6.1.4.1.5655.4.1.6.4
Indicates the number of reports dropped by the RDR-formatter.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

rdrFormatterClearCountersTime 1.3.6.1.4.1.5655.4.1.6.5
The time since RDR-formatter counters were last cleared. Writing a 0 to this object causes the RDR-formatter counters to be cleared.
OBJECT-TYPE    
  TimeTicks  

rdrFormatterReportRate 1.3.6.1.4.1.5655.4.1.6.6
Indicates the rate of the reports (in reports per second) currently sent to all of the destinations.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

rdrFormatterReportRatePeak 1.3.6.1.4.1.5655.4.1.6.7
Indicates the maximum report rate sent to all of the destinations.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

rdrFormatterReportRatePeakTime 1.3.6.1.4.1.5655.4.1.6.8
Indicates the time since the rdrFormatterReportRatePeak value occurred.
OBJECT-TYPE    
  TimeTicks  

rdrFormatterProtocol 1.3.6.1.4.1.5655.4.1.6.9
Indicates the RDR protocol currently in use.
OBJECT-TYPE    
  INTEGER other(1), rdrv1(2), rdrv2(3)  

rdrFormatterForwardingMode 1.3.6.1.4.1.5655.4.1.6.10
Indicates the mode of how the RDR formatter sends the reports to its destinations.
OBJECT-TYPE    
  INTEGER other(1), redundancy(2), simpleLoadBalancing(3), multicast(4)  

rdrFormatterCategoryTable 1.3.6.1.4.1.5655.4.1.6.11
The RDR-formatter Category table. Describes the different categories of RDRs and RDR destination groups.
OBJECT-TYPE    
  SEQUENCE OF  
    RdrFormatterCategoryEntry

rdrFormatterCategoryEntry 1.3.6.1.4.1.5655.4.1.6.11.1
A category table entry.
OBJECT-TYPE    
  RdrFormatterCategoryEntry  

rdrFormatterCategoryIndex 1.3.6.1.4.1.5655.4.1.6.11.1.1
The category number.
OBJECT-TYPE    
  Integer32 1..4  

rdrFormatterCategoryName 1.3.6.1.4.1.5655.4.1.6.11.1.2
The name given to this category.
OBJECT-TYPE    
  SnmpAdminString  

rdrFormatterCategoryNumReportsSent 1.3.6.1.4.1.5655.4.1.6.11.1.3
Indicates the number of reports sent by the RDR-formatter to this category.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

rdrFormatterCategoryNumReportsDiscarded 1.3.6.1.4.1.5655.4.1.6.11.1.4
Indicates the number of reports dropped by the RDR-formatter on this category.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

rdrFormatterCategoryReportRate 1.3.6.1.4.1.5655.4.1.6.11.1.5
Indicates the rate of the reports (in reports per second) currently sent to this category.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

rdrFormatterCategoryReportRatePeak 1.3.6.1.4.1.5655.4.1.6.11.1.6
Indicates the maximum report rate sent to this category.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

rdrFormatterCategoryReportRatePeakTime 1.3.6.1.4.1.5655.4.1.6.11.1.7
Indicates the time since the rdrFormatterCategoryReportRatePeak value occurred.
OBJECT-TYPE    
  TimeTicks  

rdrFormatterCategoryNumReportsQueued 1.3.6.1.4.1.5655.4.1.6.11.1.8
Indicates the amount of pending reports in this category.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

rdrFormatterCategoryDestTable 1.3.6.1.4.1.5655.4.1.6.12
The RDR-formatter Category destinations table. This table lists the addresses of Data Collectors. If the RDR-formatter is enabled, the destination with the highest priority that a TCP connection to it can be established would receive the reports generated by the traffic processors.
OBJECT-TYPE    
  SEQUENCE OF  
    RdrFormatterCategoryDestEntry

rdrFormatterCategoryDestEntry 1.3.6.1.4.1.5655.4.1.6.12.1
A destination table entry.
OBJECT-TYPE    
  RdrFormatterCategoryDestEntry  

rdrFormatterCategoryDestPriority 1.3.6.1.4.1.5655.4.1.6.12.1.1
The priority given to the Data Collector for this category. The active Data Collector is the Data Collector with the highest priority and a TCP connection that is up.
OBJECT-TYPE    
  Integer32 1..100  

rdrFormatterCategoryDestStatus 1.3.6.1.4.1.5655.4.1.6.12.1.2
In modes 'redundancy(2)' and in 'simpleLoadBalancing(3)' there can be only one 'active' destination, which is the destination to which reports are being sent. In 'multicast(4)' modes all destination will receive the 'active(2)' status.
OBJECT-TYPE    
  INTEGER other(1), active(2), standby(3)  

loggerGrp 1.3.6.1.4.1.5655.4.1.7
OBJECT IDENTIFIER    

loggerUserLogEnable 1.3.6.1.4.1.5655.4.1.7.1
Indicates whether the logging of user information is enabled or disabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

loggerUserLogNumInfo 1.3.6.1.4.1.5655.4.1.7.2
Indicates the number of Info messages logged into the user log file since last reboot or last time the counter was cleared.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

loggerUserLogNumWarning 1.3.6.1.4.1.5655.4.1.7.3
Indicates the number of Warning messages logged into the user log file since last reboot or last time the counter was cleared.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

loggerUserLogNumError 1.3.6.1.4.1.5655.4.1.7.4
Indicates the number of Error messages logged into the user log file since last reboot or last time the counter was cleared.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

loggerUserLogNumFatal 1.3.6.1.4.1.5655.4.1.7.5
Indicates the number of Fatal messages logged into the User-Log since last reboot or last time the counter was cleared.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

loggerUserLogClearCountersTime 1.3.6.1.4.1.5655.4.1.7.6
The time since user log counters were last cleared. Writing a 0 to this object causes the user log counters to be cleared.
OBJECT-TYPE    
  TimeTicks  

subscribersGrp 1.3.6.1.4.1.5655.4.1.8
OBJECT IDENTIFIER    

subscribersInfoTable 1.3.6.1.4.1.5655.4.1.8.1
The subscribers information table consists of data regarding subscribers management operations performed.
OBJECT-TYPE    
  SEQUENCE OF  
    SubscribersInfoEntry

subscribersInfoEntry 1.3.6.1.4.1.5655.4.1.8.1.1
A SubscribersInfoEntry entry.
OBJECT-TYPE    
  SubscribersInfoEntry  

subscribersNumIntroduced 1.3.6.1.4.1.5655.4.1.8.1.1.1
Indicates the current number of subscribers introduced to the SCE. These subscribers may or may not have IP address or VLAN mappings. Subscribers who do not have mappings of any kind cannot be associated with traffic, thus will be served by the SCE according to the default settings.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

subscribersNumFree 1.3.6.1.4.1.5655.4.1.8.1.1.2
Indicates the number of subscribers that may be introduced in addition to the subscribers that are already introduced to the SCE (subscribersNumIntroduced).
OBJECT-TYPE    
  Unsigned32 0..4294967295  

subscribersNumIpAddrMappings 1.3.6.1.4.1.5655.4.1.8.1.1.3
Indicates the current number of 'IP address to subscriber' mappings.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

subscribersNumIpAddrMappingsFree 1.3.6.1.4.1.5655.4.1.8.1.1.4
Indicates the number of free 'IP address to subscriber' mappings that may be used for defining new mappings.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

subscribersNumIpRangeMappings 1.3.6.1.4.1.5655.4.1.8.1.1.5
Indicates the current number of 'IP-range to subscriber' mappings.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

subscribersNumIpRangeMappingsFree 1.3.6.1.4.1.5655.4.1.8.1.1.6
Indicates the number of free 'IP-range to subscriber' mappings that may be used for defining new mappings.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

subscribersNumVlanMappings 1.3.6.1.4.1.5655.4.1.8.1.1.7
Indicates the current number of VLAN to subscribers mappings.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

subscribersNumVlanMappingsFree 1.3.6.1.4.1.5655.4.1.8.1.1.8
Indicates the number of free 'VLAN to subscriber' mappings that may be used for defining new mappings.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

subscribersNumActive 1.3.6.1.4.1.5655.4.1.8.1.1.9
Indicates the current number of active subscribers, these subscribers necessarily have an IP address or VLAN mappings that define the traffic that should be associated and served according to the subscriber service agreement.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

subscribersNumActivePeak 1.3.6.1.4.1.5655.4.1.8.1.1.10
Indicates the peak value of subscribersNumActive since the last time it was cleared or the system started.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

subscribersNumActivePeakTime 1.3.6.1.4.1.5655.4.1.8.1.1.11
Indicates the time since the subscribersNumActivePeak value occurred.
OBJECT-TYPE    
  TimeTicks  

subscribersNumUpdates 1.3.6.1.4.1.5655.4.1.8.1.1.12
Indicates the accumulated number of subscribers database updates received by the SCE.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

subscribersCountersClearTime 1.3.6.1.4.1.5655.4.1.8.1.1.13
Indicates the time since the subscribers counters were cleared. Writing a 0 to this object causes the counters to be cleared.
OBJECT-TYPE    
  TimeTicks  

subscribersNumTpIpRanges 1.3.6.1.4.1.5655.4.1.8.1.1.14
Indicates the current number of 'Traffic Processor IP ranges' used.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

subscribersNumTpIpRangesFree 1.3.6.1.4.1.5655.4.1.8.1.1.15
Indicates the number of free 'Traffic Processor IP ranges'.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

subscribersNumAnonymous 1.3.6.1.4.1.5655.4.1.8.1.1.16
Indicates the current number of anonymous subscribers.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

subscribersNumWithSessions 1.3.6.1.4.1.5655.4.1.8.1.1.17
Indicates the current number of subscribers with open sessions.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

subscribersPropertiesTable 1.3.6.1.4.1.5655.4.1.8.2
The subscribers properties table provides the list of properties available for each subscriber.
OBJECT-TYPE    
  SEQUENCE OF  
    SubscribersPropertiesEntry

subscribersPropertiesEntry 1.3.6.1.4.1.5655.4.1.8.2.1
A subscribersPropertiesTable entry.
OBJECT-TYPE    
  SubscribersPropertiesEntry  

spIndex 1.3.6.1.4.1.5655.4.1.8.2.1.1
An index value that uniquely identify the property.
OBJECT-TYPE    
  Integer32 0..1000000  

spName 1.3.6.1.4.1.5655.4.1.8.2.1.2
Subscriber property name.
OBJECT-TYPE    
  SnmpAdminString SIZE(1..128)  

spType 1.3.6.1.4.1.5655.4.1.8.2.1.3
Subscriber application property type in respect to: variable type (integer, boolean, string etc), number of elements (scalar or array) and restrictions if any exist.
OBJECT-TYPE    
  SnmpAdminString  

subscribersPropertiesValueTable 1.3.6.1.4.1.5655.4.1.8.3
The subscribers properties value table is used to provide subscriber properties values for subscribers introduced into the SCE. An entry must be created by setting the entry's spvRowStatus object with createAndGo (4) before setting any other of the entry's objects. To specify the subscriber's property set the spvSubName and spvPropertyName objects. The spvPropertyName must be one of the properties from the subscribersPropertiesTable. To remove an entry set the spvRowStatus object with destroy (6). To poll the subscriber property the manager need to poll the spvPropertyStringValue, the spvPropertyUintValue or the spvPropertyCounter64Value objects. The table is cleared when the application is unloaded.
OBJECT-TYPE    
  SEQUENCE OF  
    SubscribersPropertiesValueEntry

subscribersPropertiesValueEntry 1.3.6.1.4.1.5655.4.1.8.3.1
A subscribersPropertiesValueTable entry.
OBJECT-TYPE    
  SubscribersPropertiesValueEntry  

spvIndex 1.3.6.1.4.1.5655.4.1.8.3.1.1
A index to the table.
OBJECT-TYPE    
  Integer32 1..4096  

spvSubName 1.3.6.1.4.1.5655.4.1.8.3.1.2
A name that uniquely identifies the subscriber.
OBJECT-TYPE    
  SnmpAdminString SIZE(1..40)  

spvPropertyName 1.3.6.1.4.1.5655.4.1.8.3.1.3
A name that uniquely identifies the subscriber property. Array type properties may be accessed each element at a time in C like format, e.g. x[1], or y[1][2].
OBJECT-TYPE    
  SnmpAdminString SIZE(1..128)  

spvRowStatus 1.3.6.1.4.1.5655.4.1.8.3.1.4
This object controls creation of a table entry. Only setting the createAndGo (4) and destroy (6) will change the status of the entry.
OBJECT-TYPE    
  RowStatus  

spvPropertyStringValue 1.3.6.1.4.1.5655.4.1.8.3.1.5
The value of the subscriber property in string format.
OBJECT-TYPE    
  SnmpAdminString SIZE(0..128)  

spvPropertyUintValue 1.3.6.1.4.1.5655.4.1.8.3.1.6
The value of the subscriber property in unsigned integer. If the property can't be casted to unsigned integer this object returns zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

spvPropertyCounter64Value 1.3.6.1.4.1.5655.4.1.8.3.1.7
The value of the subscriber property in Counter64. If the property can't be casted to Counter64 this object returns zero.
OBJECT-TYPE    
  Counter64  

trafficProcessorGrp 1.3.6.1.4.1.5655.4.1.9
OBJECT IDENTIFIER    

tpInfoTable 1.3.6.1.4.1.5655.4.1.9.1
The Traffic Processor Info table consists of data regarding traffic handled by the traffic processors by classification of packets and flows.
OBJECT-TYPE    
  SEQUENCE OF  
    TpInfoEntry

tpInfoEntry 1.3.6.1.4.1.5655.4.1.9.1.1
A tpInfoTable entry.
OBJECT-TYPE    
  TpInfoEntry  

tpModuleIndex 1.3.6.1.4.1.5655.4.1.9.1.1.1
An index value that uniquely identifies the module where this traffic processor is located.
OBJECT-TYPE    
  Integer32 1..255  

tpIndex 1.3.6.1.4.1.5655.4.1.9.1.1.2
An index value that uniquely identifies this traffic processor within a module. The value is determined by the location of the traffic processor on the module. Valid entries are 1 to the value of moduleNumTrafficProcessors for this module.
OBJECT-TYPE    
  Integer32 1..255  

tpTotalNumHandledPackets 1.3.6.1.4.1.5655.4.1.9.1.1.3
Indicates the accumulated number of packets handled by this traffic processor since last reboot or last time this counter was cleared.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tpTotalNumHandledFlows 1.3.6.1.4.1.5655.4.1.9.1.1.4
Indicates the accumulated number of flows handled by this traffic Processor since last reboot or last time this counter was cleared.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tpNumActiveFlows 1.3.6.1.4.1.5655.4.1.9.1.1.5
Indicates the number of flows currently being handled by this traffic processor.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tpNumActiveFlowsPeak 1.3.6.1.4.1.5655.4.1.9.1.1.6
Indicates the peak value of tpNumActiveFlows since the last time it was cleared or the system started.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tpNumActiveFlowsPeakTime 1.3.6.1.4.1.5655.4.1.9.1.1.7
Indicates the time since the tpNumActiveFlowsPeak value occurred.
OBJECT-TYPE    
  TimeTicks  

tpNumTcpActiveFlows 1.3.6.1.4.1.5655.4.1.9.1.1.8
Indicates the number of TCP flows currently being handled by this traffic processor.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tpNumTcpActiveFlowsPeak 1.3.6.1.4.1.5655.4.1.9.1.1.9
Indicates the peak value of tpNumTcpActiveFlows since the last time it was cleared or the system started.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tpNumTcpActiveFlowsPeakTime 1.3.6.1.4.1.5655.4.1.9.1.1.10
Indicates the time since the tpNumTcpActiveFlowsPeak value occurred.
OBJECT-TYPE    
  TimeTicks  

tpNumUdpActiveFlows 1.3.6.1.4.1.5655.4.1.9.1.1.11
Indicates the number of UDP flows currently being handled by this traffic processor.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tpNumUdpActiveFlowsPeak 1.3.6.1.4.1.5655.4.1.9.1.1.12
Indicates the peak value of tpNumUdpActiveFlows since the last time it was cleared or the system started.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tpNumUdpActiveFlowsPeakTime 1.3.6.1.4.1.5655.4.1.9.1.1.13
Indicates the time since the tpNumUdpActiveFlowsPeak value occurred.
OBJECT-TYPE    
  TimeTicks  

tpNumNonTcpUdpActiveFlows 1.3.6.1.4.1.5655.4.1.9.1.1.14
Indicates the number of non TCP/UDP flows currently being handled by this traffic processor.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tpNumNonTcpUdpActiveFlowsPeak 1.3.6.1.4.1.5655.4.1.9.1.1.15
Indicates the peak value of tpNumNonTcpUdpActiveFlows since the last time it was cleared or the system started.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tpNumNonTcpUdpActiveFlowsPeakTime 1.3.6.1.4.1.5655.4.1.9.1.1.16
Indicates the time since the tpNumNonTcpUdpActiveFlowsPeak value occurred.
OBJECT-TYPE    
  TimeTicks  

tpTotalNumBlockedPackets 1.3.6.1.4.1.5655.4.1.9.1.1.17
Indicates the accumulated number of packets discarded by this traffic processor according to application blocking rules.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tpTotalNumBlockedFlows 1.3.6.1.4.1.5655.4.1.9.1.1.18
Indicates the accumulated number of flows discarded by this traffic processor according to application blocking rules.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tpTotalNumDiscardedPacketsDueToBwLimit 1.3.6.1.4.1.5655.4.1.9.1.1.19
Indicates the accumulated number of packets discarded by this traffic processor due to subscriber bandwidth limitations.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tpTotalNumWredDiscardedPackets 1.3.6.1.4.1.5655.4.1.9.1.1.20
Indicates the accumulated number of packets discarded by this traffic processor due to congestion in the queues.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tpTotalNumFragments 1.3.6.1.4.1.5655.4.1.9.1.1.21
Indicates the accumulated number of fragmented packets handled by this traffic processor.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tpTotalNumNonIpPackets 1.3.6.1.4.1.5655.4.1.9.1.1.22
Indicates the accumulated number of non IP packets handled by this traffic processor.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tpTotalNumIpCrcErrPackets 1.3.6.1.4.1.5655.4.1.9.1.1.23
Indicates the accumulated number of packets with IP CRC error handled by this traffic processor.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tpTotalNumIpLengthErrPackets 1.3.6.1.4.1.5655.4.1.9.1.1.24
Indicates the accumulated number of packets with IP length error handled by this traffic processor.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tpTotalNumIpBroadcastPackets 1.3.6.1.4.1.5655.4.1.9.1.1.25
Indicates the accumulated number of IP broadcast packets handled by this traffic processor.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tpTotalNumTtlErrPackets 1.3.6.1.4.1.5655.4.1.9.1.1.26
Indicates the accumulated number of packets with TTL error handled by this traffic processor.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tpTotalNumTcpUdpCrcErrPackets 1.3.6.1.4.1.5655.4.1.9.1.1.27
Indicates the accumulated number of TCP/UDP packets with CRC error handled by this traffic processor.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tpClearCountersTime 1.3.6.1.4.1.5655.4.1.9.1.1.28
Indicates the time since the traffic processor statistics counters were last cleared. Writing a 0 to this object causes the traffic processor counters to be cleared.
OBJECT-TYPE    
  TimeTicks  

tpHandledPacketsRate 1.3.6.1.4.1.5655.4.1.9.1.1.29
Indicates the rate in packets per second of the packets handled by this traffic processor.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tpHandledPacketsRatePeak 1.3.6.1.4.1.5655.4.1.9.1.1.30
Indicates the peak value of tpHandledPacketsRate since the last time it was cleared or the system started.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tpHandledPacketsRatePeakTime 1.3.6.1.4.1.5655.4.1.9.1.1.31
Indicates the time since the tpHandledPacketsRatePeak value occurred.
OBJECT-TYPE    
  TimeTicks  

tpHandledFlowsRate 1.3.6.1.4.1.5655.4.1.9.1.1.32
Indicates the rate in flows opening per second of the flows handled by this traffic processor.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tpHandledFlowsRatePeak 1.3.6.1.4.1.5655.4.1.9.1.1.33
Indicates the peak value of tpHandledFlowsRate since the last time it was cleared or the system started.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

tpHandledFlowsRatePeakTime 1.3.6.1.4.1.5655.4.1.9.1.1.34
Indicates the time since the tpHandledFlowsRatePeakTime value occurred.
OBJECT-TYPE    
  TimeTicks  

tpCpuUtilization 1.3.6.1.4.1.5655.4.1.9.1.1.35
Indicates the percentage of CPU utilization, updated once every 2 minutes.
OBJECT-TYPE    
  Integer32 0..100  

tpCpuUtilizationPeak 1.3.6.1.4.1.5655.4.1.9.1.1.36
Indicates the peak value of tpCpuUtilization since the last time it was cleared or the system started.
OBJECT-TYPE    
  Integer32 0..100  

tpCpuUtilizationPeakTime 1.3.6.1.4.1.5655.4.1.9.1.1.37
Indicates the time since the tpCpuUtilizationPeak value occurred.
OBJECT-TYPE    
  TimeTicks  

tpFlowsCapacityUtilization 1.3.6.1.4.1.5655.4.1.9.1.1.38
Indicates the percentage of flows capacity utilization.
OBJECT-TYPE    
  Integer32 0..100  

tpFlowsCapacityUtilizationPeak 1.3.6.1.4.1.5655.4.1.9.1.1.39
Indicates the peak value of tpFlowsCapacityUtilization since the last time it was cleared or the system started.
OBJECT-TYPE    
  Integer32 0..100  

tpFlowsCapacityUtilizationPeakTime 1.3.6.1.4.1.5655.4.1.9.1.1.40
Indicates the time since the tpFlowsCapacityUtilizationPeak value occurred.
OBJECT-TYPE    
  TimeTicks  

tpServiceLoss 1.3.6.1.4.1.5655.4.1.9.1.1.41
Indicates the relative amount of service loss in this traffic Processor, in units of 0.001%, since last reboot or last time this counter was cleared.
OBJECT-TYPE    
  Integer32 0..100000  

pportGrp 1.3.6.1.4.1.5655.4.1.10
OBJECT IDENTIFIER    

pportTable 1.3.6.1.4.1.5655.4.1.10.1
A list of port entries. The number of entries is determined by the number of modules in the chassis and the number of ports on each module.
OBJECT-TYPE    
  SEQUENCE OF  
    PportEntry

pportEntry 1.3.6.1.4.1.5655.4.1.10.1.1
Entry containing information for a particular port on a module.
OBJECT-TYPE    
  PportEntry  

pportModuleIndex 1.3.6.1.4.1.5655.4.1.10.1.1.1
An index value that uniquely identifies the module where this port is located.
OBJECT-TYPE    
  Integer32 1..255  

pportIndex 1.3.6.1.4.1.5655.4.1.10.1.1.2
An index value that uniquely identifies this port within a module. The value is determined by the location of the port on the module. Valid entries are 1 to the value of moduleNumPorts for this module.
OBJECT-TYPE    
  Integer32 1..255  

pportType 1.3.6.1.4.1.5655.4.1.10.1.1.3
The type of physical layer medium dependent interface on the port.
OBJECT-TYPE    
  INTEGER other(1), e100BaseTX(11), e1000BaseT(15), e1000BaseSX(28)  

pportNumTxQueues 1.3.6.1.4.1.5655.4.1.10.1.1.4
The number of transmit queues supported by this port.
OBJECT-TYPE    
  Integer32 0..255  

pportIfIndex 1.3.6.1.4.1.5655.4.1.10.1.1.5
The value of the instance of the ifIndex object, defined in MIB-II, for this port.
OBJECT-TYPE    
  Integer32 0..255  

pportAdminSpeed 1.3.6.1.4.1.5655.4.1.10.1.1.6
The desired speed of the port. The current operational speed of the port can be determined from ifSpeed.
OBJECT-TYPE    
  INTEGER autoNegotiation(1), s10000000(10000000), s100000000(100000000), s1000000000(1000000000)  

pportAdminDuplex 1.3.6.1.4.1.5655.4.1.10.1.1.7
The desired duplex of the port.
OBJECT-TYPE    
  INTEGER half(1), full(2), auto(4)  

pportOperDuplex 1.3.6.1.4.1.5655.4.1.10.1.1.8
Indicates whether the port is operating in half-duplex or full-duplex.
OBJECT-TYPE    
  INTEGER half(1), full(2)  

pportLinkIndex 1.3.6.1.4.1.5655.4.1.10.1.1.9
Indicates the linkIndex of the link that this port belongs to. Value of 0 indicates that this port is not associated with any link. Value of -1 indicates that this port is associated to multiple links.
OBJECT-TYPE    
  Integer32 -1..255  

pportOperStatus 1.3.6.1.4.1.5655.4.1.10.1.1.10
Indicates the status of the port and if the port is down indicates the reason.
OBJECT-TYPE    
  INTEGER other(1), up(2), reflectionForcingDown(3), redundancyForcingDown(4), otherDown(5)  

txQueuesGrp 1.3.6.1.4.1.5655.4.1.11
OBJECT IDENTIFIER    

txQueuesTable 1.3.6.1.4.1.5655.4.1.11.1
This table consists of information on the SCE's transmit queues.
OBJECT-TYPE    
  SEQUENCE OF  
    TxQueuesEntry

txQueuesEntry 1.3.6.1.4.1.5655.4.1.11.1.1
A txQueuesTable entry.
OBJECT-TYPE    
  TxQueuesEntry  

txQueuesModuleIndex 1.3.6.1.4.1.5655.4.1.11.1.1.1
An index value that uniquely identifies the module where this queue is located.
OBJECT-TYPE    
  Integer32 1..255  

txQueuesPortIndex 1.3.6.1.4.1.5655.4.1.11.1.1.2
An index value that uniquely identifies the port where this queue is located.
OBJECT-TYPE    
  Integer32 1..255  

txQueuesQueueIndex 1.3.6.1.4.1.5655.4.1.11.1.1.3
An index value that uniquely identifies this queue within a port. The value is determined by the location of the queue on the port. Valid entries are 1 to the value of portNumTxQueues for this module.
OBJECT-TYPE    
  Integer32 1..255  

txQueuesDescription 1.3.6.1.4.1.5655.4.1.11.1.1.4
Description of the transmit queue.
OBJECT-TYPE    
  SnmpAdminString  

txQueuesBandwidth 1.3.6.1.4.1.5655.4.1.11.1.1.5
The bandwidth in L1 kbps configured for this queue.
OBJECT-TYPE    
  Integer32 1..1000000  

txQueuesUtilization 1.3.6.1.4.1.5655.4.1.11.1.1.6
The percentage of bandwidth utilization relative to the configured rate.
OBJECT-TYPE    
  Integer32 0..100  

txQueuesUtilizationPeak 1.3.6.1.4.1.5655.4.1.11.1.1.7
Indicates the peak value of txQueuesUtilization since the last time it was cleared or the system started.
OBJECT-TYPE    
  Integer32 0..100  

txQueuesUtilizationPeakTime 1.3.6.1.4.1.5655.4.1.11.1.1.8
Indicates the time since the txQueuesUtilizationPeak value occurred.
OBJECT-TYPE    
  TimeTicks  

txQueuesClearCountersTime 1.3.6.1.4.1.5655.4.1.11.1.1.9
Indicates the time since the TX queues statistics counters were last cleared. Writing a 0 to this object causes the TX queues counters to be cleared.
OBJECT-TYPE    
  TimeTicks  

txQueuesDroppedBytes 1.3.6.1.4.1.5655.4.1.11.1.1.10
Amount of dropped L3 bytes. This is valid only if the system is configured to count dropped bytes per TX queue.
OBJECT-TYPE    
  Counter64  

globalControllersGrp 1.3.6.1.4.1.5655.4.1.12
OBJECT IDENTIFIER    

globalControllersTable 1.3.6.1.4.1.5655.4.1.12.1
This table consists of information on the SCE's Global Controllers. note: the globalControllersIndex and the SCE CLI configuration index have a offset of one i.e. 1 in the MIB refers to 0 in the CLI.
OBJECT-TYPE    
  SEQUENCE OF  
    GlobalControllersEntry

globalControllersEntry 1.3.6.1.4.1.5655.4.1.12.1.1
A globalControllersTable entry.
OBJECT-TYPE    
  GlobalControllersEntry  

globalControllersModuleIndex 1.3.6.1.4.1.5655.4.1.12.1.1.1
An index value that uniquely identifies the module where this controller is located.
OBJECT-TYPE    
  Integer32 1..255  

globalControllersPortIndex 1.3.6.1.4.1.5655.4.1.12.1.1.2
An index value that uniquely identifies the port where this controller is located.
OBJECT-TYPE    
  Integer32 1..255  

globalControllersIndex 1.3.6.1.4.1.5655.4.1.12.1.1.3
An index value that uniquely identifies this controller within a port.
OBJECT-TYPE    
  Integer32 1..2147483647  

globalControllersDescription 1.3.6.1.4.1.5655.4.1.12.1.1.4
Description of the controller.
OBJECT-TYPE    
  SnmpAdminString  

globalControllersBandwidth 1.3.6.1.4.1.5655.4.1.12.1.1.5
The L1 bandwidth configured for this controller.
OBJECT-TYPE    
  Integer32 1..1000000  

globalControllersUtilization 1.3.6.1.4.1.5655.4.1.12.1.1.6
The percentage of bandwidth utilization relative to the configured rate.
OBJECT-TYPE    
  Integer32 0..100  

globalControllersUtilizationPeak 1.3.6.1.4.1.5655.4.1.12.1.1.7
Indicates the peak value of globalControllersUtilization since the last time it was cleared or the system started.
OBJECT-TYPE    
  Integer32 0..100  

globalControllersUtilizationPeakTime 1.3.6.1.4.1.5655.4.1.12.1.1.8
Indicates the time since the globalControllersUtilizationPeak value occurred.
OBJECT-TYPE    
  TimeTicks  

globalControllersClearCountersTime 1.3.6.1.4.1.5655.4.1.12.1.1.9
Indicates the time since the controllers statistics counters were last cleared. Writing a 0 to this object causes the controllers counters to be cleared.
OBJECT-TYPE    
  TimeTicks  

globalControllersDroppedBytes 1.3.6.1.4.1.5655.4.1.12.1.1.10
Amount of L3 dropped bytes. This is valid only if the system is configured to count dropped bytes per global controller.
OBJECT-TYPE    
  Counter64  

applicationGrp 1.3.6.1.4.1.5655.4.1.13
OBJECT IDENTIFIER    

appInfoTable 1.3.6.1.4.1.5655.4.1.13.1
This table consists of information on the SCE's application.
OBJECT-TYPE    
  SEQUENCE OF  
    AppInfoEntry

appInfoEntry 1.3.6.1.4.1.5655.4.1.13.1.1
A appInfoTable entry.
OBJECT-TYPE    
  AppInfoEntry  

appName 1.3.6.1.4.1.5655.4.1.13.1.1.1
The application name.
OBJECT-TYPE    
  SnmpAdminString  

appDescription 1.3.6.1.4.1.5655.4.1.13.1.1.2
The application description.
OBJECT-TYPE    
  SnmpAdminString  

appVersion 1.3.6.1.4.1.5655.4.1.13.1.1.3
The application version.
OBJECT-TYPE    
  SnmpAdminString  

appPropertiesTable 1.3.6.1.4.1.5655.4.1.13.2
The application properties table provides the list of properties available for the application. The table is cleared when the application is unloaded.
OBJECT-TYPE    
  SEQUENCE OF  
    AppPropertiesEntry

appPropertiesEntry 1.3.6.1.4.1.5655.4.1.13.2.1
A appPropertiesTable entry.
OBJECT-TYPE    
  AppPropertiesEntry  

apIndex 1.3.6.1.4.1.5655.4.1.13.2.1.1
An index value that uniquely identify the property.
OBJECT-TYPE    
  Integer32 0..1000000  

apName 1.3.6.1.4.1.5655.4.1.13.2.1.2
Application property name. Property can be either scalar or array type.
OBJECT-TYPE    
  SnmpAdminString SIZE(1..128)  

apType 1.3.6.1.4.1.5655.4.1.13.2.1.3
Application property type.
OBJECT-TYPE    
  SnmpAdminString  

appPropertiesValueTable 1.3.6.1.4.1.5655.4.1.13.3
The applications properties value table is used to provide specific values for the applications properties. An entry must be created by setting the entry's apvRowStatus object with createAndGo (4) before setting the name of the property requested. To specify the property set the apvPropertyName objects. The apvPropertyName must be one of the properties from the appPropertiesTable. To remove an entry set the apvRowStatus object with destroy (6). To poll the application property, poll the apvPropertyStringValue, apvPropertyUintValue, or apvPropertyCounter64Value object. The table is cleared when the application is unloaded.
OBJECT-TYPE    
  SEQUENCE OF  
    AppPropertiesValueEntry

appPropertiesValueEntry 1.3.6.1.4.1.5655.4.1.13.3.1
A appPropertiesValueTable entry.
OBJECT-TYPE    
  AppPropertiesValueEntry  

apvIndex 1.3.6.1.4.1.5655.4.1.13.3.1.1
Index to the table.
OBJECT-TYPE    
  Integer32 1..1024  

apvPropertyName 1.3.6.1.4.1.5655.4.1.13.3.1.2
A name that uniquely identifies the application property. Array type properties may be accessed each element at a time in C like format, e.g. x[1], or y[1][2].
OBJECT-TYPE    
  SnmpAdminString SIZE(1..128)  

apvRowStatus 1.3.6.1.4.1.5655.4.1.13.3.1.3
This object controls creation of a table entry.
OBJECT-TYPE    
  RowStatus  

apvPropertyStringValue 1.3.6.1.4.1.5655.4.1.13.3.1.4
The value of the application property in display string format.
OBJECT-TYPE    
  SnmpAdminString SIZE(0..128)  

apvPropertyUintValue 1.3.6.1.4.1.5655.4.1.13.3.1.5
The value of the application property in unsigned integer. If the property can't be casted to unsigned integer this object returns zero.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

apvPropertyCounter64Value 1.3.6.1.4.1.5655.4.1.13.3.1.6
The value of the application property in Counter64 format. If the property can't be casted to Counter64, getting this object returns zero.
OBJECT-TYPE    
  Counter64  

trafficCountersGrp 1.3.6.1.4.1.5655.4.1.14
OBJECT IDENTIFIER    

trafficCountersTable 1.3.6.1.4.1.5655.4.1.14.1
The Traffic counters table provides information regarding the value of different the traffic counters.
OBJECT-TYPE    
  SEQUENCE OF  
    TrafficCountersEntry

trafficCountersEntry 1.3.6.1.4.1.5655.4.1.14.1.1
Entry containing information about a traffic counter.
OBJECT-TYPE    
  TrafficCountersEntry  

trafficCounterIndex 1.3.6.1.4.1.5655.4.1.14.1.1.1
An index value that uniquely identifies the counter.
OBJECT-TYPE    
  Integer32 1..255  

trafficCounterValue 1.3.6.1.4.1.5655.4.1.14.1.1.2
A 64 bit counter value.
OBJECT-TYPE    
  Counter64  

trafficCounterName 1.3.6.1.4.1.5655.4.1.14.1.1.3
The name given to this counter.
OBJECT-TYPE    
  SnmpAdminString  

trafficCounterType 1.3.6.1.4.1.5655.4.1.14.1.1.4
Defines whether there the traffic counters counts by 'packets(3)' or by 'bytes(2)'.
OBJECT-TYPE    
  INTEGER other(1), bytes(2), packets(3)  

attackGrp 1.3.6.1.4.1.5655.4.1.15
OBJECT IDENTIFIER    

attackTypeTable 1.3.6.1.4.1.5655.4.1.15.1
The Attack type table provides information regarding detected attacks, aggregated by attack type.
OBJECT-TYPE    
  SEQUENCE OF  
    AttackTypeEntry

attackTypeEntry 1.3.6.1.4.1.5655.4.1.15.1.1
Entry containing aggregated information about attacks of a given type.
OBJECT-TYPE    
  AttackTypeEntry  

attackTypeIndex 1.3.6.1.4.1.5655.4.1.15.1.1.1
An index value that uniquely identifies the attack type.
OBJECT-TYPE    
  Integer32 1..255  

attackTypeName 1.3.6.1.4.1.5655.4.1.15.1.1.2
The name of this attack type.
OBJECT-TYPE    
  SnmpAdminString  

attackTypeCurrentNumAttacks 1.3.6.1.4.1.5655.4.1.15.1.1.3
The current amount of attacks detected of this type.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

attackTypeTotalNumAttacks 1.3.6.1.4.1.5655.4.1.15.1.1.4
The total amount of attacks detected of this type since last clear.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

attackTypeTotalNumFlows 1.3.6.1.4.1.5655.4.1.15.1.1.5
The total amount of flows in attacks detected of this type since last clear.
OBJECT-TYPE    
  Counter64  

attackTypeTotalNumSeconds 1.3.6.1.4.1.5655.4.1.15.1.1.6
The total duration of attacks detected of this type since last clear.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

vasTrafficForwardingGrp 1.3.6.1.4.1.5655.4.1.16
OBJECT IDENTIFIER    

vasServerTable 1.3.6.1.4.1.5655.4.1.16.1
The VAS server Table provides information on each VAS server operational status.
OBJECT-TYPE    
  SEQUENCE OF  
    VasServerEntry

vasServerEntry 1.3.6.1.4.1.5655.4.1.16.1.1
Entry containing information about VAS server status.
OBJECT-TYPE    
  VasServerEntry  

vasServerIndex 1.3.6.1.4.1.5655.4.1.16.1.1.1
An index value that uniquely identifies a VAS server.
OBJECT-TYPE    
  Integer32 1..255  

vasServerId 1.3.6.1.4.1.5655.4.1.16.1.1.2
The ID of the VAS server.
OBJECT-TYPE    
  Integer32 0..255  

vasServerAdminStatus 1.3.6.1.4.1.5655.4.1.16.1.1.3
Indicates only the administrative status of the VAS sever, in order to activate a server it should be also configured with a VLAN and a group.
OBJECT-TYPE    
  INTEGER other(1), up(2), down(3)  

vasServerOperStatus 1.3.6.1.4.1.5655.4.1.16.1.1.4
Indicates the operational status of the VAS sever.
OBJECT-TYPE    
  INTEGER other(1), up(2), down(3)  

mplsVpnAutoLearnGrp 1.3.6.1.4.1.5655.4.1.17
OBJECT IDENTIFIER    

mplsVpnSoftwareCountersTable 1.3.6.1.4.1.5655.4.1.17.1
The MPLS VPN software counters table provides information on various system software counters related to MPLS VPN auto learn.
OBJECT-TYPE    
  SEQUENCE OF  
    MplsVpnSoftwareCountersEntry

mplsVpnSoftwareCountersEntry 1.3.6.1.4.1.5655.4.1.17.1.1
Entry containing information about MPLS VPN auto learn SW counters.
OBJECT-TYPE    
  MplsVpnSoftwareCountersEntry  

mplsVpnMaxHWMappings 1.3.6.1.4.1.5655.4.1.17.1.1.1
The maximum number of MPLS VPN mappings supported by HW (including all kinds of mappings).
OBJECT-TYPE    
  Integer32 0..1000000  

mplsVpnCurrentHWMappings 1.3.6.1.4.1.5655.4.1.17.1.1.2
The current number of HW MPLS VPN mappings in use.
OBJECT-TYPE    
  Integer32 0..1000000  

Defined Objects

LinkModeType  
The various modes of a link.
TEXTUAL-CONVENTION    
  INTEGER other(1), bypass(2), forwarding(3), cutoff(4), sniffing(5)  

PmoduleEntry  
SEQUENCE    
  Integer32 as pmoduleIndex  
  INTEGER as pmoduleType  
  Integer32 as pmoduleNumTrafficProcessors  
  Integer32 as pmoduleSlotNum  
  SnmpAdminString as pmoduleHwVersion  
  Integer32 as pmoduleNumPorts  
  Integer32 as pmoduleNumLinks  
  INTEGER as pmoduleConnectionMode  
  SnmpAdminString as pmoduleSerialNumber  
  TimeTicks as pmoduleUpStreamAttackFilteringTime  
  TimeTicks as pmoduleUpStreamLastAttackFilteringTime  
  TimeTicks as pmoduleDownStreamAttackFilteringTime  
  TimeTicks as pmoduleDownStreamLastAttackFilteringTime  
  TimeTicks as pmoduleAttackObjectsClearTime  
  INTEGER as pmoduleAdminStatus  
  INTEGER as pmoduleOperStatus  

LinkEntry  
SEQUENCE    
  Integer32 as linkModuleIndex  
  Integer32 as linkIndex  
  LinkModeType as linkAdminModeOnActive  
  LinkModeType as linkAdminModeOnFailure  
  LinkModeType as linkOperMode  
  INTEGER as linkStatusReflectionEnable  
  Integer32 as linkSubscriberSidePortIndex  
  Integer32 as linkNetworkSidePortIndex  

RdrFormatterDestEntry  
SEQUENCE    
  IpAddress as rdrFormatterDestIPAddr  
  Integer32 as rdrFormatterDestPort  
  Integer32 as rdrFormatterDestPriority  
  INTEGER as rdrFormatterDestStatus  
  INTEGER as rdrFormatterDestConnectionStatus  
  Unsigned32 as rdrFormatterDestNumReportsSent  
  Unsigned32 as rdrFormatterDestNumReportsDiscarded  
  Unsigned32 as rdrFormatterDestReportRate  
  Unsigned32 as rdrFormatterDestReportRatePeak  
  TimeTicks as rdrFormatterDestReportRatePeakTime  

RdrFormatterCategoryEntry  
SEQUENCE    
  Integer32 as rdrFormatterCategoryIndex  
  SnmpAdminString as rdrFormatterCategoryName  
  Unsigned32 as rdrFormatterCategoryNumReportsSent  
  Unsigned32 as rdrFormatterCategoryNumReportsDiscarded  
  Unsigned32 as rdrFormatterCategoryReportRate  
  Unsigned32 as rdrFormatterCategoryReportRatePeak  
  TimeTicks as rdrFormatterCategoryReportRatePeakTime  
  Unsigned32 as rdrFormatterCategoryNumReportsQueued  

RdrFormatterCategoryDestEntry  
SEQUENCE    
  Integer32 as rdrFormatterCategoryDestPriority  
  INTEGER as rdrFormatterCategoryDestStatus  

SubscribersInfoEntry  
SEQUENCE    
  Unsigned32 as subscribersNumIntroduced  
  Unsigned32 as subscribersNumFree  
  Unsigned32 as subscribersNumIpAddrMappings  
  Unsigned32 as subscribersNumIpAddrMappingsFree  
  Unsigned32 as subscribersNumIpRangeMappings  
  Unsigned32 as subscribersNumIpRangeMappingsFree  
  Unsigned32 as subscribersNumVlanMappings  
  Unsigned32 as subscribersNumVlanMappingsFree  
  Unsigned32 as subscribersNumActive  
  Unsigned32 as subscribersNumActivePeak  
  TimeTicks as subscribersNumActivePeakTime  
  Unsigned32 as subscribersNumUpdates  
  TimeTicks as subscribersCountersClearTime  
  Unsigned32 as subscribersNumTpIpRanges  
  Unsigned32 as subscribersNumTpIpRangesFree  
  Unsigned32 as subscribersNumAnonymous  
  Unsigned32 as subscribersNumWithSessions  

TpInfoEntry  
SEQUENCE    
  Integer32 as tpModuleIndex  
  Integer32 as tpIndex  
  Unsigned32 as tpTotalNumHandledPackets  
  Unsigned32 as tpTotalNumHandledFlows  
  Unsigned32 as tpNumActiveFlows  
  Unsigned32 as tpNumActiveFlowsPeak  
  TimeTicks as tpNumActiveFlowsPeakTime  
  Unsigned32 as tpNumTcpActiveFlows  
  Unsigned32 as tpNumTcpActiveFlowsPeak  
  TimeTicks as tpNumTcpActiveFlowsPeakTime  
  Unsigned32 as tpNumUdpActiveFlows  
  Unsigned32 as tpNumUdpActiveFlowsPeak  
  TimeTicks as tpNumUdpActiveFlowsPeakTime  
  Unsigned32 as tpNumNonTcpUdpActiveFlows  
  Unsigned32 as tpNumNonTcpUdpActiveFlowsPeak  
  TimeTicks as tpNumNonTcpUdpActiveFlowsPeakTime  
  Unsigned32 as tpTotalNumBlockedPackets  
  Unsigned32 as tpTotalNumBlockedFlows  
  Unsigned32 as tpTotalNumDiscardedPacketsDueToBwLimit  
  Unsigned32 as tpTotalNumWredDiscardedPackets  
  Unsigned32 as tpTotalNumFragments  
  Unsigned32 as tpTotalNumNonIpPackets  
  Unsigned32 as tpTotalNumIpCrcErrPackets  
  Unsigned32 as tpTotalNumIpLengthErrPackets  
  Unsigned32 as tpTotalNumIpBroadcastPackets  
  Unsigned32 as tpTotalNumTtlErrPackets  
  Unsigned32 as tpTotalNumTcpUdpCrcErrPackets  
  TimeTicks as tpClearCountersTime  
  Unsigned32 as tpHandledPacketsRate  
  Unsigned32 as tpHandledPacketsRatePeak  
  TimeTicks as tpHandledPacketsRatePeakTime  
  Unsigned32 as tpHandledFlowsRate  
  Unsigned32 as tpHandledFlowsRatePeak  
  TimeTicks as tpHandledFlowsRatePeakTime  
  Integer32 as tpCpuUtilization  
  Integer32 as tpCpuUtilizationPeak  
  TimeTicks as tpCpuUtilizationPeakTime  
  Integer32 as tpFlowsCapacityUtilization  
  Integer32 as tpFlowsCapacityUtilizationPeak  
  TimeTicks as tpFlowsCapacityUtilizationPeakTime  
  Integer32 as tpServiceLoss  

PportEntry  
SEQUENCE    
  Integer32 as pportModuleIndex  
  Integer32 as pportIndex  
  INTEGER as pportType  
  Integer32 as pportNumTxQueues  
  Integer32 as pportIfIndex  
  INTEGER as pportAdminSpeed  
  INTEGER as pportAdminDuplex  
  INTEGER as pportOperDuplex  
  Integer32 as pportLinkIndex  
  INTEGER as pportOperStatus  

TxQueuesEntry  
SEQUENCE    
  Integer32 as txQueuesModuleIndex  
  Integer32 as txQueuesPortIndex  
  Integer32 as txQueuesQueueIndex  
  SnmpAdminString as txQueuesDescription  
  Integer32 as txQueuesBandwidth  
  Integer32 as txQueuesUtilization  
  Integer32 as txQueuesUtilizationPeak  
  TimeTicks as txQueuesUtilizationPeakTime  
  TimeTicks as txQueuesClearCountersTime  
  Counter64 as txQueuesDroppedBytes  

GlobalControllersEntry  
SEQUENCE    
  Integer32 as globalControllersModuleIndex  
  Integer32 as globalControllersPortIndex  
  Integer32 as globalControllersIndex  
  SnmpAdminString as globalControllersDescription  
  Integer32 as globalControllersBandwidth  
  Integer32 as globalControllersUtilization  
  Integer32 as globalControllersUtilizationPeak  
  TimeTicks as globalControllersUtilizationPeakTime  
  TimeTicks as globalControllersClearCountersTime  
  Counter64 as globalControllersDroppedBytes  

AppInfoEntry  
SEQUENCE    
  SnmpAdminString as appName  
  SnmpAdminString as appDescription  
  SnmpAdminString as appVersion  

AppPropertiesEntry  
SEQUENCE    
  Integer32 as apIndex  
  SnmpAdminString as apName  
  SnmpAdminString as apType  

AppPropertiesValueEntry  
SEQUENCE    
  Integer32 as apvIndex  
  SnmpAdminString as apvPropertyName  
  RowStatus as apvRowStatus  
  SnmpAdminString as apvPropertyStringValue  
  Unsigned32 as apvPropertyUintValue  
  Counter64 as apvPropertyCounter64Value  

SubscribersPropertiesEntry  
SEQUENCE    
  Integer32 as spIndex  
  SnmpAdminString as spName  
  SnmpAdminString as spType  

SubscribersPropertiesValueEntry  
SEQUENCE    
  Integer32 as spvIndex  
  SnmpAdminString as spvSubName  
  SnmpAdminString as spvPropertyName  
  RowStatus as spvRowStatus  
  SnmpAdminString as spvPropertyStringValue  
  Unsigned32 as spvPropertyUintValue  
  Counter64 as spvPropertyCounter64Value  

TrafficCountersEntry  
SEQUENCE    
  Integer32 as trafficCounterIndex  
  Counter64 as trafficCounterValue  
  SnmpAdminString as trafficCounterName  
  INTEGER as trafficCounterType  

AttackTypeEntry  
SEQUENCE    
  Integer32 as attackTypeIndex  
  SnmpAdminString as attackTypeName  
  Unsigned32 as attackTypeCurrentNumAttacks  
  Unsigned32 as attackTypeTotalNumAttacks  
  Counter64 as attackTypeTotalNumFlows  
  Unsigned32 as attackTypeTotalNumSeconds  

VasServerEntry  
SEQUENCE    
  Integer32 as vasServerIndex  
  Integer32 as vasServerId  
  INTEGER as vasServerAdminStatus  
  INTEGER as vasServerOperStatus  

MplsVpnSoftwareCountersEntry  
SEQUENCE    
  Integer32 as mplsVpnMaxHWMappings  
  Integer32 as mplsVpnCurrentHWMappings