
| SNMPv2-TC | RFC1213-MIB | RFC1155-SMI |
| RFC-1215 | RFC-1212 | PDN-HEADER-MIB |
| RowStatus | DisplayString | ifIndex |
| Counter | IpAddress | TimeTicks |
| TRAP-TYPE | OBJECT-TYPE | pdn-control |
| devHWControlReset | 1.3.6.1.4.1.1795.2.24.2.10.1 | ||
| Writing the value reset(2) to this object initiates a Hardware power-on reset of the device. The value read from this object is noOp(1). | |||
| OBJECT-TYPE | |||
| INTEGER | noOp(1), reset(2) | ||
| devControlTestTable | 1.3.6.1.4.1.1795.2.24.2.10.2 | ||
| A list of Device tests that may be run. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DevControlTestEntry | |||
| devControlTestEntry | 1.3.6.1.4.1.1795.2.24.2.10.2.1 | ||
| The device Test Table. | |||
| OBJECT-TYPE | |||
| DevControlTestEntry | |||
| devControlTest | 1.3.6.1.4.1.1795.2.24.2.10.2.1.1 | ||
| An index into the test table that indicates which test the row involves. | |||
| OBJECT-TYPE | |||
| INTEGER | lampTest(1) | ||
| devControlTestStatus | 1.3.6.1.4.1.1795.2.24.2.10.2.1.2 | ||
| The test status on the device. This object indicates whether the indexed test is currently active(1) or inactive(2). | |||
| OBJECT-TYPE | |||
| INTEGER | active(1), inactive(2) | ||
| devControlTestCmd | 1.3.6.1.4.1.1795.2.24.2.10.2.1.3 | ||
| Used to start or stop the indexed test. When read, the value returned will be the next logical command. | |||
| OBJECT-TYPE | |||
| INTEGER | start(1), stop(2) | ||
| devControlDownLoadTable | 1.3.6.1.4.1.1795.2.24.2.10.3 | ||
| A list of the current Download Releases and their associated status. Each Download Release will be indexed by a number from 1 to N. The user will be able to view the Download Release String and Operational Status of the release (valid or invalid) and activate a valid Download Release by changing the Administration Status to active. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DevControlDownLoadEntry | |||
| devControlDownLoadEntry | 1.3.6.1.4.1.1795.2.24.2.10.3.1 | ||
| The Device DownLoad Release entry. | |||
| OBJECT-TYPE | |||
| DevControlDownLoadEntry | |||
| devControlDownLoadIndex | 1.3.6.1.4.1.1795.2.24.2.10.3.1.1 | ||
| This object is used to index the download table (range 1 to N). | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| devControlDownLoadRelease | 1.3.6.1.4.1.1795.2.24.2.10.3.1.2 | ||
| This object indicates the Software Release for this Download. If the Software Download is Operational Status is invalid, the Software Revision Number will be blank. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..16) | ||
| devControlDownLoadOperStatus | 1.3.6.1.4.1.1795.2.24.2.10.3.1.3 | ||
| This object indicates whether or not the indexed download entry contains a valid(1) or invalid(2) download. | |||
| OBJECT-TYPE | |||
| INTEGER | valid(1), invalid(2) | ||
| devControlDownLoadAdminStatus | 1.3.6.1.4.1.1795.2.24.2.10.3.1.4 | ||
| This object indicates whether or not the indexed download entry is active(1) or inactive(2). Writing active(1) will activate that software release and cause the unit to reset (response may timeout). Writing active(1) to a download entry whose devControlDownloadOperStatus is invalid will return BAD VALUE. Writing inactive(2) will always return BAD VALUE. | |||
| OBJECT-TYPE | |||
| INTEGER | active(1), inactive(2) | ||
| devControlRMON | 1.3.6.1.4.1.1795.2.24.2.10.4 | ||
| OBJECT IDENTIFIER | |||
| devControlRMONAdminStatus | 1.3.6.1.4.1.1795.2.24.2.10.4.1 | ||
| The desired state of the RMON process. If set to enabled(1), the RMON process will perform the collection tasks it is set up to do. If it is disabled(2), RMON will not perform collection. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| devSNSwitchFirmwareTable | 1.3.6.1.4.1.1795.2.24.2.10.5 | ||
| A list of objects needed to switch bank and reset the Service Node (ASN). | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DevSNSwitchFirmwareEntry | |||
| devSNSwitchFirmwareEntry | 1.3.6.1.4.1.1795.2.24.2.10.5.1 | ||
| The Service Node Switch Firmware table. | |||
| OBJECT-TYPE | |||
| DevSNSwitchFirmwareEntry | |||
| devSNSwitchFirmwareIndex | 1.3.6.1.4.1.1795.2.24.2.10.5.1.1 | ||
| An index into the Service Node switch firmware table that indicates which interface the row involves. This index corresponds to the entityPhysicalIndex of the entity MIB | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| devSNSwitchFirmwareBank | 1.3.6.1.4.1.1795.2.24.2.10.5.1.2 | ||
| Writing the value switch(2) to this object will switch the banks to change the firmware being used on the service node. The firmware from the stand by (not active) bank will be used as the currently running firmware. The value read from this object is noOp(1). | |||
| OBJECT-TYPE | |||
| INTEGER | noOp(1), switch(2) | ||
| devControlFTP | 1.3.6.1.4.1.1795.2.24.2.10.6 | ||
| OBJECT IDENTIFIER | |||
| devControlFTPRate | 1.3.6.1.4.1.1795.2.24.2.10.6.1 | ||
| FTP max transfer rate in (Kbps) | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| devFileXferMIBObjects | 1.3.6.1.4.1.1795.2.24.2.10.7 | ||
| OBJECT IDENTIFIER | |||
| devFileXferConfigTable | 1.3.6.1.4.1.1795.2.24.2.10.7.1 | ||
| The Paradyne FileXfer Client Config Table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DevFileXferConfigEntry | |||
| devFileXferConfigEntry | 1.3.6.1.4.1.1795.2.24.2.10.7.1.1 | ||
| Use of the File Tranfer MIB could be used with other MIBS in the following manner: a) Use another MIB/means to verify available space /make room for a file to be transfered to this device b) Use this MIB to download the file c) Use another MIB/means to select the file you want to make active if your selecting firmware for example. d) Use another MIB/means to reset the device. A management station wishing to initiate a file transfer needs to create an entry in this table. To do so, you must first identify the ifIndex of the device you intend to do the transfer with. You should then create the associated instance of the row status It must also, either in the same or in successive PDUs, create an instance of devFileXferFileName, DevFileXferFileType, . devFileXferServerIpAddress, devFileXferOperation. It should also modify the default values for the other configuration objects if the defaults are not appropriate. Once the appropriate instance of all the configuration objects have been created, either by an explicit SNMP set request or by default, the row status should be set to active to initiate the request. Note that this entire procedure may be initiated via a single set request which specifies a row status of createAndGo as well as specifies valid values for the non-defaulted configuration objects. Once the DevFileXferConfigEntry request has been created (i.e. the devFileXferRowStatus has been made active), the entry cannot be modified - the only operation possible after this is to delete the row. Once the request completes, the management station should retrieve the values of the status objects of interest, and should then delete the entry. In order to prevent old entries from clogging the table, entries could be aged out, but an entry will never be deleted within 5 minutes of completing. | |||
| OBJECT-TYPE | |||
| DevFileXferConfigEntry | |||
| devFileXferFileName | 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.1 | ||
| This object contains the name of the filetransfer file. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| devFileXferCopyProtocol | 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.2 | ||
| The transfer protocol that should be used to copy the file across the network. If the file transfer is to occur locally on the SNMP agent, the method of transfer is left upto the implementation, and is not restricted to the protocols below. | |||
| OBJECT-TYPE | |||
| INTEGER | tftp(1), ftp(2) | ||
| devFileXferFileType | 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.3 | ||
| Specifies the type of file your want to transfer. | |||
| OBJECT-TYPE | |||
| INTEGER | firmware(1), config(2) | ||
| devFileXferServerIpAddress | 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.4 | ||
| This object contains the file transfer server's IP address. | |||
| OBJECT-TYPE | |||
| IpAddress | |||
| devFileXferUserName | 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.5 | ||
| This object contains the username if a username is needed to login to the server. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| devFileXferUserPassword | 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.6 | ||
| This object contains the password if a password is needed to login to the server. This object will return null on a read operation. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| devFileXferOperation | 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.7 | ||
| This object contains the operation the file transfer wants to perform. | |||
| OBJECT-TYPE | |||
| INTEGER | get(1), put(2) | ||
| devFileXferPktsSent | 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.8 | ||
| This object contains the the number of packets sent to the server at the time of interrogation. | |||
| OBJECT-TYPE | |||
| Counter | |||
| devFileXferPktsRecv | 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.9 | ||
| This object contains the the number of packets received from the server at the time of interrogation. | |||
| OBJECT-TYPE | |||
| Counter | |||
| devFileXferOctetsSent | 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.10 | ||
| This object contains the the number of octets sent to the server at the time of interrogation. | |||
| OBJECT-TYPE | |||
| Counter | |||
| devFileXferOctetsRecv | 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.11 | ||
| This object contains the the number of octets received from the server at the time of interrogation. | |||
| OBJECT-TYPE | |||
| Counter | |||
| devFileXferOwnerString | 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.12 | ||
| The entity which currently has the 'ownership' required to invoke the operation on this index. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(0..255) | ||
| devFileXferStatus | 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.13 | ||
| This object contains the status of the file transfer. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), success(2), failure(3), inprogress(4) | ||
| devFileXferErrorStatus | 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.14 | ||
| This object contains the reason code of the failure determined in devFileXferStatus. The reason code are specific to the file transfer protocol. Please refer to the file transfer protocols respective RFC for clarification of the error code value meanings. TFTP Error Codes from rfc 1350 FTP Error Codes from rfc 959 | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| devFileXferSendEvent | 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.15 | ||
| This object indicates whether or not to send the devFileXferEvent event trap . | |||
| OBJECT-TYPE | |||
| INTEGER | active(1), inactive(2) | ||
| devFileXferRowStatus | 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.16 | ||
| This object is used to create a new row or delete an existing row in this table. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| devFileXferXferTime | 1.3.6.1.4.1.1795.2.24.2.10.7.1.1.17 | ||
| This object indicates the elapsed time (in hundredths of a second) of the file transfer. | |||
| OBJECT-TYPE | |||
| TimeTicks | |||
| devFileXferMIBTraps | 1.3.6.1.4.1.1795.2.24.2.10.8 | ||
| OBJECT IDENTIFIER | |||
| devFileXferEvent | 1.3.6.1.4.1.1795.2.24.2.10.8.1 | ||
| This trap is to communicate a couple of things about the completion of a file transfer. devFileXferStatus - Did it complete successfully or not. devFileXferErrorStatus - If not, what was the error code. devFileXferOperation - What operation was performed?. devFileXferFileType - Was it a firmware xfer or config? devFileXferFileName - The name of the file transfered. | |||
| TRAP-TYPE | |||
| devFileXferStatus | |||
| devFileXferErrorStatus | |||
| devFileXferOperation | |||
| devFileXferFileType | |||
| devFileXferFileName | |||
| devFirmwareControlMIBObjects | 1.3.6.1.4.1.1795.2.24.2.10.9 | ||
| OBJECT IDENTIFIER | |||
| devFirmwareControlTable | 1.3.6.1.4.1.1795.2.24.2.10.9.1 | ||
| A list of the current Firmware Releases and their associated status. Each Firmware Release will be indexed by a number from 1 to N. The user will be able to view the Firmware Release String and Operational Status of the release (valid or invalid) and activate a valid Firmware Release by changing the Administration Status to active. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DevFirmwareControlEntry | |||
| devFirmwareControlEntry | 1.3.6.1.4.1.1795.2.24.2.10.9.1.1 | ||
| The Device Firmware Release entry. | |||
| OBJECT-TYPE | |||
| DevFirmwareControlEntry | |||
| devFirmwareControlIndex | 1.3.6.1.4.1.1795.2.24.2.10.9.1.1.1 | ||
| This object is used to index the Firmware table (range 1 to N). | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| devFirmwareControlRelease | 1.3.6.1.4.1.1795.2.24.2.10.9.1.1.2 | ||
| This object indicates the Software Release for this Firmware. If the Software Firmware is Operational Status is invalid, the Software Revision Number will be blank. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..16) | ||
| devFirmwareControlOperStatus | 1.3.6.1.4.1.1795.2.24.2.10.9.1.1.3 | ||
| This object indicates whether or not the indexed Firmware entry contains a valid(1) or invalid(2) Firmware. | |||
| OBJECT-TYPE | |||
| INTEGER | valid(1), invalid(2), unknown(3) | ||
| devFirmwareControlAdminStatus | 1.3.6.1.4.1.1795.2.24.2.10.9.1.1.4 | ||
| This object indicates whether or not the indexed Firmware entry is active(1) or inactive(2). Writing active(1) will activate that software release and cause the unit to reset (response may timeout). Writing active(1) to a Firmware entry whose devFirmwareControlOperStatus is invalid will return BAD VALUE. Writing inactive(2) will always return BAD VALUE. | |||
| OBJECT-TYPE | |||
| INTEGER | active(1), inactive(2) | ||
| DevControlTestEntry | |||
| SEQUENCE | |||
| INTEGER as devControlTest | |||
| INTEGER as devControlTestStatus | |||
| INTEGER as devControlTestCmd | |||
| DevControlDownLoadEntry | |||
| SEQUENCE | |||
| INTEGER as devControlDownLoadIndex | |||
| DisplayString as devControlDownLoadRelease | |||
| INTEGER as devControlDownLoadOperStatus | |||
| INTEGER as devControlDownLoadAdminStatus | |||
| DevSNSwitchFirmwareEntry | |||
| SEQUENCE | |||
| INTEGER as devSNSwitchFirmwareIndex | |||
| INTEGER as devSNSwitchFirmwareBank | |||
| DevFileXferConfigEntry | |||
| SEQUENCE | |||
| DisplayString as devFileXferFileName | |||
| INTEGER as devFileXferCopyProtocol | |||
| INTEGER as devFileXferFileType | |||
| IpAddress as devFileXferServerIpAddress | |||
| DisplayString as devFileXferUserName | |||
| DisplayString as devFileXferUserPassword | |||
| INTEGER as devFileXferOperation | |||
| Counter as devFileXferPktsSent | |||
| Counter as devFileXferPktsRecv | |||
| Counter as devFileXferOctetsSent | |||
| Counter as devFileXferOctetsRecv | |||
| OCTET STRING as devFileXferOwnerString | |||
| INTEGER as devFileXferStatus | |||
| INTEGER as devFileXferErrorStatus | |||
| INTEGER as devFileXferSendEvent | |||
| RowStatus as devFileXferRowStatus | |||
| TimeTicks as devFileXferXferTime | |||
| DevFirmwareControlEntry | |||
| SEQUENCE | |||
| INTEGER as devFirmwareControlIndex | |||
| DisplayString as devFirmwareControlRelease | |||
| INTEGER as devFirmwareControlOperStatus | |||
| INTEGER as devFirmwareControlAdminStatus | |||