PDN-DSLAM-SYSTEM-MIB

File: PDN-DSLAM-SYSTEM-MIB.mib (20522 bytes)

Imported modules

SNMPv2-TC PDN-TC RFC1155-SMI
RFC-1212 RFC-1215 RFC1213-MIB
ENTITY-MIB PDN-HEADER-MIB

Imported symbols

TAddress RowStatus DisplayString
IdslClockMode SwitchState Counter
IpAddress TimeTicks OBJECT-TYPE
TRAP-TYPE ifIndex sysObjectID
entPhysicalIndex pdn-dslam

Defined Objects

sysDevDslamMIBObjects 1.3.6.1.4.1.1795.2.24.2.24.1
OBJECT IDENTIFIER    

sysDevStats 1.3.6.1.4.1.1795.2.24.2.24.1.1
OBJECT IDENTIFIER    

loginHistTable 1.3.6.1.4.1.1795.2.24.2.24.1.1.1
This table shows the most recent 10 logins and all active users currently accessing the device. It is indexed by userId and loginTime.
OBJECT-TYPE    
  SEQUENCE OF  
    LoginHistTableEntry

loginHistTableEntry 1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1
This object corresponds to an entry in the login history table.
OBJECT-TYPE    
  LoginHistTableEntry  

loginUserId 1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1.1
This object containes the user login id.
OBJECT-TYPE    
  DisplayString  

loginTime 1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1.2
This object containes the login time in seconds when the login session is established.
OBJECT-TYPE    
  TimeTicks  

loginAccessApp 1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1.3
This object describes the access application used by the end user to access the device. This can be done through console, using telnet or using ftp.
OBJECT-TYPE    
  INTEGER console(1), telnet(2), ftp(3)  

loginAccessHost 1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1.4
This object containes the ip address of the network management station when the access application is telnet or ftp. In case of console, this object contains 0.0.0.0.
OBJECT-TYPE    
  IpAddress  

loginUserPriv 1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1.5
This object containes the access privileges of the user.
OBJECT-TYPE    
  INTEGER administrator(1), operator(2)  

loginStatus 1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1.6
This object indicates whether the user is still accessing the device.
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

loginFailureCountTable 1.3.6.1.4.1.1795.2.24.2.24.1.1.2
This table containes the statistics for login failures. It is indexed by access type i.e console, telnet or ftp.
OBJECT-TYPE    
  SEQUENCE OF  
    LoginFailureCountTableEntry

loginFailureCountTableEntry 1.3.6.1.4.1.1795.2.24.2.24.1.1.2.1
This object corresponds to an entry in the login failure count table.
OBJECT-TYPE    
  LoginFailureCountTableEntry  

loginFailureAccessApp 1.3.6.1.4.1.1795.2.24.2.24.1.1.2.1.1
This object describes the access application used by the end user to access the device. This can be done through console, using telnet or using ftp.
OBJECT-TYPE    
  INTEGER console(1), telnet(2), ftp(3)  

loginFailureCount 1.3.6.1.4.1.1795.2.24.2.24.1.1.2.1.2
This object containes the number of unsuccesful logins for console, ftp or telnet.
OBJECT-TYPE    
  Counter  

sysDevConfig 1.3.6.1.4.1.1795.2.24.2.24.1.2
OBJECT IDENTIFIER    

enablePowerSourceFailureAlarm 1.3.6.1.4.1.1795.2.24.2.24.1.2.1
This objects corresponds to enabling/disabling the power source failure alarm - for both A and B power sources This object is for the MCC only. The default value of this object should be 1.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

devIfTable 1.3.6.1.4.1.1795.2.24.2.24.1.2.2
This table is used to configure information for a particular interface
OBJECT-TYPE    
  SEQUENCE OF  
    DevIfTableEntry

devIfTableEntry 1.3.6.1.4.1.1795.2.24.2.24.1.2.2.1
This object corresponds to an entry in the DevifTable
OBJECT-TYPE    
  DevIfTableEntry  

devPacketDiscardPolicy 1.3.6.1.4.1.1795.2.24.2.24.1.2.2.1.1
This object corresponds to the policy for packet discards during periods of congestion : mrrp - most recently received packets are discarded. lrrp - least recently received packets are discarded. The default value of this object should be 2
OBJECT-TYPE    
  INTEGER noOp(1), mrrp(2), lrrp(3)  

devLinkIntegrity 1.3.6.1.4.1.1795.2.24.2.24.1.2.2.1.2
This object corresponds to the enabling or disabling of the ethernet link integrity : enable - enable link integrity disable - disable link integrity none - for interfaces that do not support link integrity The default value of this object should be 1
OBJECT-TYPE    
  INTEGER enable(1), disable(2), none(3)  

communityTrapAddressInfoTable 1.3.6.1.4.1.1795.2.24.2.24.1.2.3
This table is used to set the trap destination address for a particular community.
OBJECT-TYPE    
  SEQUENCE OF  
    CommunityTrapAddressInfoTableEntry

communityTrapAddressInfoTableEntry 1.3.6.1.4.1.1795.2.24.2.24.1.2.3.1
This object corresponds to an entry in the community trap address info table.
OBJECT-TYPE    
  CommunityTrapAddressInfoTableEntry  

trapCommunityName 1.3.6.1.4.1.1795.2.24.2.24.1.2.3.1.1
This object corresponds to the name of the SNMP Community.
OBJECT-TYPE    
  DisplayString SIZE(1..32)  

trapDestAndPort 1.3.6.1.4.1.1795.2.24.2.24.1.2.3.1.2
The IP Address and Port of the destination to which a trap must be sent.
OBJECT-TYPE    
  TAddress  

trapsEnable 1.3.6.1.4.1.1795.2.24.2.24.1.2.3.1.3
This object corresponds to turning traps on/off for a particular destination. enable (1) - traps will be sent to the specified destination. disable (2)- traps will not be sent to the specified destination. The default value of this object should be 2.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

trapRowStatus 1.3.6.1.4.1.1795.2.24.2.24.1.2.3.1.4
This object is used to add or delete a a row from the table.
OBJECT-TYPE    
  RowStatus  

entCommunityTable 1.3.6.1.4.1.1795.2.24.2.24.1.2.4
This table is used to set the various configuration parameters for a particular community.
OBJECT-TYPE    
  SEQUENCE OF  
    EntCommunityTableEntry

entCommunityTableEntry 1.3.6.1.4.1.1795.2.24.2.24.1.2.4.1
This object corresponds to an entry in the community table.
OBJECT-TYPE    
  EntCommunityTableEntry  

entCommunityName 1.3.6.1.4.1.1795.2.24.2.24.1.2.4.1.1
This object corresponds to the name of the SNMP Community
OBJECT-TYPE    
  DisplayString SIZE(1..32)  

entCommunityType 1.3.6.1.4.1.1795.2.24.2.24.1.2.4.1.2
The type of the community readOnly - this community is only allowed to do get's readWrite - this community is allowed to do get's and set's The default value of this object should be 1
OBJECT-TYPE    
  INTEGER readOnly(1), readWrite(2)  

entCommunityRowStatus 1.3.6.1.4.1.1795.2.24.2.24.1.2.4.1.3
This object is used to add or delete a a row from the table.
OBJECT-TYPE    
  RowStatus  

sysDevUserAccountTable 1.3.6.1.4.1.1795.2.24.2.24.1.2.5
This table contains the user accounts.
OBJECT-TYPE    
  SEQUENCE OF  
    SysDevUserAccountEntry

sysDevUserAccountEntry 1.3.6.1.4.1.1795.2.24.2.24.1.2.5.1
An entry containing user account information.
OBJECT-TYPE    
  SysDevUserAccountEntry  

sysDevUserAccountUserId 1.3.6.1.4.1.1795.2.24.2.24.1.2.5.1.1
This object corresponds to the login ID of the user account.
OBJECT-TYPE    
  DisplayString SIZE(6..15)  

sysDevUserAccountPrivilege 1.3.6.1.4.1.1795.2.24.2.24.1.2.5.1.2
This object corresponds to the access privilege of the user account. 1 = Operator, 2 = Administrator.
OBJECT-TYPE    
  INTEGER operator(1), administrator(2)  

sysDevUserAccountUserPassword 1.3.6.1.4.1.1795.2.24.2.24.1.2.5.1.3
This object corresponds to the password of the user account.
OBJECT-TYPE    
  DisplayString SIZE(6..15)  

sysDevUserAccountAccessPartition 1.3.6.1.4.1.1795.2.24.2.24.1.2.5.1.4
This object corresponds to the access partition of the user account. The default value of this object is 'all'
OBJECT-TYPE    
  DisplayString SIZE(0..50)  

sysDevUserAccountRowStatus 1.3.6.1.4.1.1795.2.24.2.24.1.2.5.1.5
This object corresponds to create or delete a row in sysDevUserAccountTable.
OBJECT-TYPE    
  RowStatus  

sysDevIDSLConfigTable 1.3.6.1.4.1.1795.2.24.2.24.1.2.6
A table that contains configuration information about IDSL Card.
OBJECT-TYPE    
  SEQUENCE OF  
    SysDevIDSLConfigEntry

sysDevIDSLConfigEntry 1.3.6.1.4.1.1795.2.24.2.24.1.2.6.1
A list of information for IDSL device Configuration.
OBJECT-TYPE    
  SysDevIDSLConfigEntry  

sysDevIDSLConfigPrimaryNetClockMode 1.3.6.1.4.1.1795.2.24.2.24.1.2.6.1.1
This object indicates the network clock mode set for the primary network clock. IDSL portcards with a port configured as an NT will be set to portCardDriveClockOnboard(4), both driving the backplane and using the clock for the other Local Timing transceivers on the card. Port cards with only LT ports configured will receive a clock from the backplane using portCardSinkClock(2). portCardDriveClock(3) will drive the backplane alone. The default value of this object is triState(1).
OBJECT-TYPE    
  IdslClockMode  

sysDevIDSLConfigSecondaryNetClockMode 1.3.6.1.4.1.1795.2.24.2.24.1.2.6.1.2
This object indicates the network clock mode set for the secondary network clock. IDSL portcards with a port configured as an NT will be set to portCardDriveClockOnboard(4), both driving the backplane and using the clock for the other Local Timing transceivers on the card. Port cards with only LT ports configured will receive a clock from the backplane using portCardSinkClock(2). portCardDriveClock(3) will drive the backplane alone. The default value of this object is triState(1).
OBJECT-TYPE    
  IdslClockMode  

sysDevDslamSyslog 1.3.6.1.4.1.1795.2.24.2.24.1.2.7
OBJECT IDENTIFIER    

sysDevSyslogFtpServerXferStatsEnable 1.3.6.1.4.1.1795.2.24.2.24.1.2.7.1
This object allows the network manager to enable and disable syslog messages for FTP server file transfer statistics
OBJECT-TYPE    
  SwitchState  

sysDevSyslogTftpServerXferStatsEnable 1.3.6.1.4.1.1795.2.24.2.24.1.2.7.2
This object allows the network manager to enable and disable syslog messages for TFTP server file transfer statistics
OBJECT-TYPE    
  SwitchState  

sysDevDslamMIBTraps 1.3.6.1.4.1.1795.2.24.2.24.2
OBJECT IDENTIFIER    

cCN 1.3.6.1.4.1.1795.2.24.2.24.2.7
This trap signifies a Configuration change or software upgrade in the xDSL card. This trap is of 'warning' class
TRAP-TYPE    
  ifIndex  

authenticationFailure 1.3.6.1.4.1.1795.2.24.2.24.2.8
This trap signifies an authentication failure. Authentication failures can be telnet based or terminal based. This trap is in addition to the SNMP based authentication failure trap, which is a generic trap.
TRAP-TYPE    
  loginFailureAccessApp  
  loginFailureCount  

fanModuleFailure 1.3.6.1.4.1.1795.2.24.2.24.2.9
This trap indicates the indicates the failure of the fan module on the device. This trap is sent only by the MCC card. this trap is of 'minor' class
TRAP-TYPE    

powerSourceAFailure 1.3.6.1.4.1.1795.2.24.2.24.2.10
This trap indicates that power source A has failed. This is sent only by the MCC card. This trap is of 'minor' class.
TRAP-TYPE    

slotPollFailure 1.3.6.1.4.1.1795.2.24.2.24.2.11
This trap indicates a slot poll failure. This is sent only by the MCC card. this trap is of 'major' class.
TRAP-TYPE    
  entPhysicalIndex  

ethernetJabber 1.3.6.1.4.1.1795.2.24.2.24.2.12
This trap indicates that a jabber condition has been detected on the ethernet interface. This trap is of 'major' class.
TRAP-TYPE    
  ifIndex  

ethernetJumbos 1.3.6.1.4.1.1795.2.24.2.24.2.13
This trap indicates ethernet jumbos. this trap is of 'minor' class
TRAP-TYPE    
  ifIndex  

ethernetRunts 1.3.6.1.4.1.1795.2.24.2.24.2.14
This trap indicates ethernet runts. this trap is of 'minor'
TRAP-TYPE    
  ifIndex  

powerSourceBFailure 1.3.6.1.4.1.1795.2.24.2.24.2.17
This trap indicates that power source B has failed. This is sent only by the MCC card. This trap is of 'minor' class.
TRAP-TYPE    

nonIpConservativeCardDetected 1.3.6.1.4.1.1795.2.24.2.24.2.18
This trap indicates that a non ip conservative DSL card exist in the chassis at the slot 'slotNumber'.This is sent only by the MCC card. This trap is of warning class.
TRAP-TYPE    
  entPhysicalIndex  

nonSupportedMCC 1.3.6.1.4.1.1795.2.24.2.24.2.20
AN has detected MCC firmware release too low to support this device
TRAP-TYPE    
  sysObjectID  

nonSupportedChassis 1.3.6.1.4.1.1795.2.24.2.24.2.21
AN in slot xx has been installed in a chassis that cannot support one or more of its features.
TRAP-TYPE    
  sysObjectID  

fanModuleOperational 1.3.6.1.4.1.1795.2.24.2.24.2.109
This trap indicates the indicates the fan module on the device is operational. This trap is sent only by the MCC card. This trap is of 'minor' class
TRAP-TYPE    

powerSourceAOperational 1.3.6.1.4.1.1795.2.24.2.24.2.110
This trap indicates that the power source A is operational. This is sent only by the MCC card. This trap is of 'minor' class. This trap compliments powerSourceAFailure trap.
TRAP-TYPE    

newCardDetected 1.3.6.1.4.1.1795.2.24.2.24.2.111
This trap indicates that a new card was detected in a slot. This is sent only by the MCC card. this trap is of 'warning' class.
TRAP-TYPE    
  entPhysicalIndex  

ethernetJabberClear 1.3.6.1.4.1.1795.2.24.2.24.2.112
This trap indicates that the jabber condition that was detected no longer exists. This trap is of 'major' class.
TRAP-TYPE    
  ifIndex  

powerSourceBOperational 1.3.6.1.4.1.1795.2.24.2.24.2.117
This trap indicates that the power source B is operational. This is sent only by the MCC card. This trap is of 'minor' class. This trap compliments powerSourceBFailure trap.
TRAP-TYPE    

Defined Objects

LoginHistTableEntry  
SEQUENCE    
  DisplayString as loginUserId  
  TimeTicks as loginTime  
  INTEGER as loginAccessApp  
  IpAddress as loginAccessHost  
  INTEGER as loginUserPriv  
  INTEGER as loginStatus  

LoginFailureCountTableEntry  
SEQUENCE    
  INTEGER as loginFailureAccessApp  
  Counter as loginFailureCount  

DevIfTableEntry  
SEQUENCE    
  INTEGER as devPacketDiscardPolicy  
  INTEGER as devLinkIntegrity  

CommunityTrapAddressInfoTableEntry  
SEQUENCE    
  DisplayString as trapCommunityName SIZE(1..32)  
  TAddress as trapDestAndPort  
  INTEGER as trapsEnable  
  RowStatus as trapRowStatus  

EntCommunityTableEntry  
SEQUENCE    
  DisplayString as entCommunityName SIZE(1..32)  
  INTEGER as entCommunityType  
  RowStatus as entCommunityRowStatus  

SysDevUserAccountEntry  
SEQUENCE    
  DisplayString as sysDevUserAccountUserId SIZE(6..15)  
  INTEGER as sysDevUserAccountPrivilege  
  DisplayString as sysDevUserAccountUserPassword SIZE(6..15)  
  DisplayString as sysDevUserAccountAccessPartition SIZE(0..50)  
  RowStatus as sysDevUserAccountRowStatus  

SysDevIDSLConfigEntry  
SEQUENCE    
  IdslClockMode as sysDevIDSLConfigPrimaryNetClockMode  
  IdslClockMode as sysDevIDSLConfigSecondaryNetClockMode