PDN-MPE-DEVICE-CONTROL-MIB

File: PDN-MPE-DEVICE-CONTROL-MIB.mib (22810 bytes)

Imported modules

PDN-TC SNMPv2-SMI SNMPv2-CONF
ENTITY-MIB PDN-HEADER-MIB SNMPv2-TC

Imported symbols

ResetStates SwitchState IpAddress
Integer32 Counter32 TimeTicks
NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE
MODULE-IDENTITY OBJECT-GROUP NOTIFICATION-GROUP
entPhysicalIndex pdn-mpe RowStatus
DisplayString

Defined Objects

mpeDevControl 1.3.6.1.4.1.1795.2.24.12.10
This MIB Module allows a user to reset a device in the DSLAM, as well as perform various operations related to the storage and retrieval of firmware and configuration files on devices.
MODULE-IDENTITY    

mpeDevControlMIBObjects 1.3.6.1.4.1.1795.2.24.12.10.1
OBJECT IDENTIFIER    

mpeDevHwControl 1.3.6.1.4.1.1795.2.24.12.10.1.1
OBJECT IDENTIFIER    

mpeDevControlTable 1.3.6.1.4.1.1795.2.24.12.10.1.1.1
A table that contains generic information about Card Control.
OBJECT-TYPE    
  SEQUENCE OF  
    DevControlEntry

mpeDevControlEntry 1.3.6.1.4.1.1795.2.24.12.10.1.1.1.1
A list of information for device Control.
OBJECT-TYPE    
  DevControlEntry  

mpeDevControlReset 1.3.6.1.4.1.1795.2.24.12.10.1.1.1.1.1
Writing the value reset (2) to this object initiates a Hardware power-on reset of the device. Writing the value resetToFactoryDefaults (3) causes the device to re-configure itself with factory defaults. The value read from this object is noOp(1).
OBJECT-TYPE    
  ResetStates  

mpeDevFileXferConfig 1.3.6.1.4.1.1795.2.24.12.10.1.2
OBJECT IDENTIFIER    

mpeDevFileXferConfigTable 1.3.6.1.4.1.1795.2.24.12.10.1.2.1
The Paradyne FileXfer Client Config Table.
OBJECT-TYPE    
  SEQUENCE OF  
    MpeDevFileXferConfigEntry

mpeDevFileXferConfigEntry 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1
Use of the File Tranfer MIB could be used with other MIBS in the following manner: a) Use another MIB/means to verify available space /make room for a file to be transfered to this device b) Use this MIB to download the file c) Use another MIB/means to select the file you want to make active if your selecting firmware for example. d) Use another MIB/means to reset the device. A management station wishing to initiate a file transfer needs to create an entry in this table. To do so, you must first identify the entPhysicalIndex of the device you intend to do the transfer with. You should then create the associated instance of the row status It must also, either in the same or in successive PDUs, create an instance of mpeDevFileXferFileName, mpeDevFileXferFileType, . mpeDevFileXferServerIpAddress, mpeDevFileXferOperation. It should also modify the default values for the other configuration objects if the defaults are not appropriate. Once the appropriate instance of all the configuration objects have been created, either by an explicit SNMP set request or by default, the row status should be set to active to initiate the request. Note that this entire procedure may be initiated via a single set request which specifies a row status of createAndGo as well as specifies valid values for the non-defaulted configuration objects. Once the MpeDevFileXferConfigEntry request has been created (i.e. the mpeDevFileXferRowStatus has been made active), the entry cannot be modified - the only operation possible after this is to delete the row. Once the request completes, the management station should retrieve the values of the status objects of interest, and should then delete the entry. In order to prevent old entries from clogging the table, entries could be aged out, but an entry will never be deleted within 5 minutes of completing.
OBJECT-TYPE    
  MpeDevFileXferConfigEntry  

mpeDevFileXferFileName 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.1
This object contains the name of the filetransfer file.
OBJECT-TYPE    
  DisplayString  

mpeDevFileXferCopyProtocol 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.2
The transfer protocol that should be used to copy the file across the network. If the file transfer is to occur locally on the SNMP agent, the method of transfer is left upto the implementation, and is not restricted to the protocols below.
OBJECT-TYPE    
  INTEGER tftp(1), ftp(2)  

mpeDevFileXferFileType 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.3
Specifies the type of file your want to transfer.
OBJECT-TYPE    
  INTEGER firmware(1), config(2)  

mpeDevFileXferServerIpAddress 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.4
This object contains the file transfer server's IP address.
OBJECT-TYPE    
  IpAddress  

mpeDevFileXferUserName 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.5
This object contains the username if a username is needed to login to the server.
OBJECT-TYPE    
  DisplayString  

mpeDevFileXferUserPassword 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.6
This object contains the password if a password is needed to login to the server. This object will return null on a read operation.
OBJECT-TYPE    
  DisplayString  

mpeDevFileXferOperation 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.7
This object contains the operation the file transfer wants to perform.
OBJECT-TYPE    
  INTEGER get(1), put(2)  

mpeDevFileXferPktsSent 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.8
This object contains the the number of packets sent to the server at the time of interrogation.
OBJECT-TYPE    
  Counter32  

mpeDevFileXferPktsRecv 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.9
This object contains the the number of packets received from the server at the time of interrogation.
OBJECT-TYPE    
  Counter32  

mpeDevFileXferOctetsSent 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.10
This object contains the the number of octets sent to the server at the time of interrogation.
OBJECT-TYPE    
  Counter32  

mpeDevFileXferOctetsRecv 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.11
This object contains the the number of octets received from the server at the time of interrogation.
OBJECT-TYPE    
  Counter32  

mpeDevFileXferOwnerString 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.12
The entity which currently has the 'ownership' required to invoke the operation on this index.
OBJECT-TYPE    
  OCTET STRING SIZE(0..255)  

mpeDevFileXferStatus 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.13
This object contains the status of the file transfer.
OBJECT-TYPE    
  INTEGER none(1), success(2), failure(3), inprogress(4)  

mpeDevFileXferErrorStatus 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.14
This object contains the reason code of the failure determined in mpeDevFileXferStatus. The reason code are specific to the file transfer protocol. Please refer to the file transfer protocols respective RFC for clarification of the error code value meanings. TFTP Error Codes from rfc 1350 FTP Error Codes from rfc 959
OBJECT-TYPE    
  Integer32  

mpeDevFileXferSendEvent 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.15
This object indicates whether or not to send the mpeDevFileXferEvent event trap .
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

mpeDevFileXferRowStatus 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.16
This object is used to create a new row or delete an existing row in this table.
OBJECT-TYPE    
  RowStatus  

mpeDevFileXferXferTime 1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.17
This object indicates the elapsed time (in hundredths of a second) of the file transfer.
OBJECT-TYPE    
  TimeTicks  

mpeDevFirmwareControl 1.3.6.1.4.1.1795.2.24.12.10.1.3
OBJECT IDENTIFIER    

mpeDevFirmwareControlTable 1.3.6.1.4.1.1795.2.24.12.10.1.3.1
A list of the current Firmware Releases and their associated status. Each Firmware Release will be indexed by a number from 1 to N. The user will be able to view the Firmware Release String and Operational Status of the release (valid or invalid) and activate a valid Firmware Release by changing the Administration Status to active.
OBJECT-TYPE    
  SEQUENCE OF  
    DevFirmwareControlEntry

mpeDevFirmwareControlEntry 1.3.6.1.4.1.1795.2.24.12.10.1.3.1.1
The Device Firmware Release entry.
OBJECT-TYPE    
  DevFirmwareControlEntry  

mpeDevFirmwareControlIndex 1.3.6.1.4.1.1795.2.24.12.10.1.3.1.1.1
This object is used to index the Firmware table (range 1 to N).
OBJECT-TYPE    
  Integer32  

mpeDevFirmwareControlRelease 1.3.6.1.4.1.1795.2.24.12.10.1.3.1.1.2
This object indicates the Software Release for this Firmware. If the Software Firmware is Operational Status is invalid, the Software Revision Number will be blank.
OBJECT-TYPE    
  DisplayString SIZE(1..16)  

mpeDevFirmwareControlOperStatus 1.3.6.1.4.1.1795.2.24.12.10.1.3.1.1.3
This object indicates whether or not the indexed Firmware entry contains a valid(1) or invalid(2) Firmware.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2), unknown(3)  

mpeDevFirmwareControlAdminStatus 1.3.6.1.4.1.1795.2.24.12.10.1.3.1.1.4
This object indicates whether or not the indexed Firmware entry is active(1) or inactive(2). Writing active(1) will activate that software release and cause the unit to reset (response may timeout). Writing active(1) to a Firmware entry whose mpeDevFirmwareControlOperStatus is invalid will return BAD VALUE. Writing inactive(2) will always return BAD VALUE.
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

mpeConfigChangeMgmt 1.3.6.1.4.1.1795.2.24.12.10.1.4
OBJECT IDENTIFIER    

mpeCCMAutoBackup 1.3.6.1.4.1.1795.2.24.12.10.1.4.1
OBJECT IDENTIFIER    

mpeCCMAutoBackupFixedDay 1.3.6.1.4.1.1795.2.24.12.10.1.4.1.1
This object indicates the days of the week on which fixed schedule automatic backups occur. If all bits are set, backups occur daily. If all bits are off, fixed schedule automatic backups are disabled.
OBJECT-TYPE    
  BITS sunday(0), monday(1), tuesday(2), wednesday(3), thursday(4), friday(5), saturday(6)  

mpeCCMAutoBackupFixedTime 1.3.6.1.4.1.1795.2.24.12.10.1.4.1.2
This object indicates the time of day, in minutes past midnight, at which automatic backups on a fixed schedule occur.
OBJECT-TYPE    
  Integer32 0..1440  

mpeCCMAutoBackupDynamicTime 1.3.6.1.4.1.1795.2.24.12.10.1.4.1.3
This object indicates the interval (in minutes) after the most recent configuration change, when a card's configuration will be backed up to the MCC Flash File System, when automatic backups are occurring on a dynamic schedule. The minimum non-zero interval is 30 minutes. The maximum interval is 24 hours (1440 minutes). When this object is zero, dynamic backups are disabled.
OBJECT-TYPE    
  Integer32 0..1440  

mpeCCMAutoRestore 1.3.6.1.4.1.1795.2.24.12.10.1.4.2
This object specifies whether the MCC Flash File System will restore stored configuration files to newly inserted cards in the DSLAM.
OBJECT-TYPE    
  SwitchState  

mpeCCMResyncOperation 1.3.6.1.4.1.1795.2.24.12.10.1.4.3
This object contains the operation performed when ResyncState is enabled. The value 'get' retrieves configuration files from the MCC FFS to all the devices. The value 'put' stores all the configuration files on the MCC FFS.
OBJECT-TYPE    
  INTEGER get(1), put(2)  

mpeCCMResyncState 1.3.6.1.4.1.1795.2.24.12.10.1.4.4
This object allows for an instantaneous 'on-demand' backup or restore of all the device configuration files on a chassis to or from the MCC Flash File System of the DSLAM. Setting the value to 'enabled' commences the resynchronization. The value reverts to 'disabled' upon completion of the resync.
OBJECT-TYPE    
  SwitchState  

mpeDevControlMIBTraps 1.3.6.1.4.1.1795.2.24.12.10.2
OBJECT IDENTIFIER    

mpeDevControlMIBTrapsV2 1.3.6.1.4.1.1795.2.24.12.10.2.0
The traps for the device control MIB.
OBJECT-IDENTITY    

mpeDevFileXferEvent 1.3.6.1.4.1.1795.2.24.12.10.2.0.1
This trap is to communicate a couple of things about the completion of a file transfer. mpeDevFileXferStatus - Did it complete successfully or not. mpeDevFileXferErrorStatus - If not, what was the error code. mpeDevFileXferOperation - What operation was performed?. mpeDevFileXferFileType - Was it a firmware xfer or config? mpeDevFileXferFileName - The name of the file transfered.
NOTIFICATION-TYPE    
  mpeDevFileXferStatus  
  mpeDevFileXferErrorStatus  
  mpeDevFileXferOperation  
  mpeDevFileXferFileType  
  mpeDevFileXferFileName  

mpeDevAutoBackupFailEvent 1.3.6.1.4.1.1795.2.24.12.10.2.0.2
This trap indicates a condition exists, which prevents automated backup of a device's configuration to the Management Controller Card (MCC) Flash File System at a scheduled time.
NOTIFICATION-TYPE    
  entPhysicalIndex  

mpeDevConfigRestoreFailEvent 1.3.6.1.4.1.1795.2.24.12.10.2.0.3
This trap is sent by a device to indicate that an incorrect or incompatible configuration file is being downloaded to the device from the MCC Flash File System.
NOTIFICATION-TYPE    
  entPhysicalIndex  

mpeDevControlMIBGroups 1.3.6.1.4.1.1795.2.24.12.10.3
OBJECT IDENTIFIER    

mpeDevHwControlGroup 1.3.6.1.4.1.1795.2.24.12.10.3.1
Objects necessary to implement minimal hardware control
OBJECT-GROUP    

mpeDevFileXferConfigGroup 1.3.6.1.4.1.1795.2.24.12.10.3.2
Object group used to implement file transfer functionality
OBJECT-GROUP    

mpeDevFirmwareControlGroup 1.3.6.1.4.1.1795.2.24.12.10.3.3
Object group used to manage firmware releases on devices
OBJECT-GROUP    

mpeConfigChangeMgmtGroup 1.3.6.1.4.1.1795.2.24.12.10.3.4
Object group used to manage automatic backup and restore of device configuration files.
OBJECT-GROUP    

mpeDevFileXferEventGroup 1.3.6.1.4.1.1795.2.24.12.10.3.5
Notifications associated with mpeDevFileXferConfigGroup
NOTIFICATION-GROUP    

mpeCCMEventGroup 1.3.6.1.4.1.1795.2.24.12.10.3.6
Notifications indicating a failure occuring during automated backup or restore of device configuration files.
NOTIFICATION-GROUP    

Defined Objects

DevControlEntry  
SEQUENCE    
  ResetStates as mpeDevControlReset  

MpeDevFileXferConfigEntry  
SEQUENCE    
  DisplayString as mpeDevFileXferFileName  
  INTEGER as mpeDevFileXferCopyProtocol  
  INTEGER as mpeDevFileXferFileType  
  IpAddress as mpeDevFileXferServerIpAddress  
  DisplayString as mpeDevFileXferUserName  
  DisplayString as mpeDevFileXferUserPassword  
  INTEGER as mpeDevFileXferOperation  
  Counter32 as mpeDevFileXferPktsSent  
  Counter32 as mpeDevFileXferPktsRecv  
  Counter32 as mpeDevFileXferOctetsSent  
  Counter32 as mpeDevFileXferOctetsRecv  
  OCTET STRING as mpeDevFileXferOwnerString  
  INTEGER as mpeDevFileXferStatus  
  Integer32 as mpeDevFileXferErrorStatus  
  INTEGER as mpeDevFileXferSendEvent  
  RowStatus as mpeDevFileXferRowStatus  
  TimeTicks as mpeDevFileXferXferTime  

DevFirmwareControlEntry  
SEQUENCE    
  Integer32 as mpeDevFirmwareControlIndex  
  DisplayString as mpeDevFirmwareControlRelease  
  INTEGER as mpeDevFirmwareControlOperStatus  
  INTEGER as mpeDevFirmwareControlAdminStatus