PERIBIT-COMMON-MIB

File: PERIBIT-COMMON-MIB.mib (11311 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC PERIBIT-GLOBAL-TC
PERIBIT-GLOBAL-REG

Imported symbols

MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE
NOTIFICATION-TYPE Integer32 DisplayString
TruthValue TcChassisType pnModules
pnCommonMib

Defined Objects

pnCommonMibModule 1.3.6.1.4.1.8239.1.1.3
A MIB module containing definitions of managed objects implemented by all Peribit Networks' products.
MODULE-IDENTITY    

pnCommonConfMib 1.3.6.1.4.1.8239.2.1.1
Sub-tree for Sequence Reducer MIB conformance statements.
OBJECT-IDENTITY    

pnCommonObjs 1.3.6.1.4.1.8239.2.1.2
Sub-tree for common MIB objects.
OBJECT-IDENTITY    

pnSys 1.3.6.1.4.1.8239.2.1.2.1
Sub-tree for common system objects.
OBJECT-IDENTITY    

pnSysSwVersion 1.3.6.1.4.1.8239.2.1.2.1.1
Full software version. The first two components of the full version are the major and minor versions. The third component indicates the maintenance release number and the fourth, the build number.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

pnSysHwVersion 1.3.6.1.4.1.8239.2.1.2.1.2
Hardware version of the unit.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

pnSysSerialNumber 1.3.6.1.4.1.8239.2.1.2.1.3
The serial number of the unit. If not available, an empty string is returned.
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

pnSysTimeZoneOffset 1.3.6.1.4.1.8239.2.1.2.1.4
The offset in seconds from UTC of the system's time zone. Values are negative for locations west of UTC and positive for locations east of UTC.
OBJECT-TYPE    
  Integer32  

pnSysDaylightSaving 1.3.6.1.4.1.8239.2.1.2.1.5
Whether daylight savings are currently in effect for the system's time zone.
OBJECT-TYPE    
  TruthValue  

pnChassis 1.3.6.1.4.1.8239.2.1.2.2
Sub-tree for common chassis information.
OBJECT-IDENTITY    

pnChassisType 1.3.6.1.4.1.8239.2.1.2.2.1
Chassis type for this Peribit device.
OBJECT-TYPE    
  TcChassisType  

pnCommonEvents 1.3.6.1.4.1.8239.2.1.3
Sub-tree for common MIB events.
OBJECT-IDENTITY    

pnCommonEventObjs 1.3.6.1.4.1.8239.2.1.3.1
Branch for objects meant only to be sent in event varbinds.
OBJECT-IDENTITY    

pnCommonEventDescr 1.3.6.1.4.1.8239.2.1.3.1.1
String that provides a textual description of the event.
OBJECT-TYPE    
  DisplayString  

pnCommonEventEvents 1.3.6.1.4.1.8239.2.1.3.2
Branch for the events themselves.
OBJECT-IDENTITY    

pnCommonEventEventsV2 1.3.6.1.4.1.8239.2.1.3.2.0
Branch for SNMPv2 events. The OIDs for SNMPv2 events should have a zero as the next-to-last sub-identifier (as specified in RFC1902).
OBJECT-IDENTITY    

pnCommonEventInFailSafeMode 1.3.6.1.4.1.8239.2.1.3.2.0.1
This trap is sent when the device boots up in fail-safe mode. This can happen for one of the following reasons: o Fail-safe reboot was explicitly initiated by the user. o The device rebooted automatically too many times because of the failure of internal consistency checks or the failure of tests that verify proper operation of the device.
NOTIFICATION-TYPE    

pnCommonEventPowerSupplyFailure 1.3.6.1.4.1.8239.2.1.3.2.0.2
One or more sources of power to the system has failed. A redundant power-supply has presumably taken over. NOTE: This trap is for future use. Peribit devices currently do not generate this trap.
NOTIFICATION-TYPE    

pnCommonEventPowerSupplyOk 1.3.6.1.4.1.8239.2.1.3.2.0.3
One or more previously failed sources of power is now working normally. The transition to normal condition happened without the system having to be restarted. NOTE: This trap is for future use. Peribit devices currently do not generate this trap.
NOTIFICATION-TYPE    

pnCommonEventLicenseExpired 1.3.6.1.4.1.8239.2.1.3.2.0.4
The license for the system expired. As a result, the system will switch over to and stay in pass-through mode.
NOTIFICATION-TYPE    
  pnCommonEventDescr  

pnCommonEventThruputLimitExceeded 1.3.6.1.4.1.8239.2.1.3.2.0.5
The throughput of traffic through the device has exceeded the limit for which it has been licensed.
NOTIFICATION-TYPE    
  pnCommonEventDescr  

pnCommonEventLicenseWillExpire 1.3.6.1.4.1.8239.2.1.3.2.0.6
The license for the system is about to expire shortly. When it eventually does expire, the system will switch over to and stay in pass-through mode.
NOTIFICATION-TYPE    
  pnCommonEventDescr  

pnCommonEventLoginFailure 1.3.6.1.4.1.8239.2.1.3.2.0.7
A user's login attempt via the console/ssh/web server failed due to incorrect username or password.
NOTIFICATION-TYPE    
  pnCommonEventDescr  

pnCommonEventFaultTolerantPassThrough 1.3.6.1.4.1.8239.2.1.3.2.0.8
An anomalous health condition was detected. It would have subsequently triggered hardware pass through mode followed by a reboot.
NOTIFICATION-TYPE    
  pnCommonEventDescr  

pnCommonEventFanFailure 1.3.6.1.4.1.8239.2.1.3.2.0.9
A cooling fan inside the device has failed. The 'pnCommonEventDescr' object has the name of the fan that failed.
NOTIFICATION-TYPE    
  pnCommonEventDescr  

pnCommonEventFanSpeedVariation 1.3.6.1.4.1.8239.2.1.3.2.0.10
The speed of a cooling fan inside the device is either too low or too high. The 'pnCommonEventDescr' object has the name of the fan that has the problem.
NOTIFICATION-TYPE    
  pnCommonEventDescr  

pnCommonEventFanOk 1.3.6.1.4.1.8239.2.1.3.2.0.11
A cooling fan inside the device that had previously failed or whose speed variation was high is now working properly. The 'pnCommonEventDescr' object has the name of the fan that has recovered.
NOTIFICATION-TYPE    
  pnCommonEventDescr  

pnCommonEventInterfaceSpeedMismatch 1.3.6.1.4.1.8239.2.1.3.2.0.12
A mismatch is detected between the local and remote interface settings. This can happen due to a mismatch in the local and remote interface speed or mode.
NOTIFICATION-TYPE    
  pnCommonEventDescr  

pnCommonEventInterfaceSpeedOk 1.3.6.1.4.1.8239.2.1.3.2.0.13
A mismatch previously detected between the local and remote interface settings is now resolved. The local and remote interface speed and mode are matched.
NOTIFICATION-TYPE    
  pnCommonEventDescr  

pnCommonEventInterfaceDuplexMismatch 1.3.6.1.4.1.8239.2.1.3.2.0.14
A possible mismatch was detected between the duplex setting of either the local or remote interface and that of the device attached to that interface. The interface (local or remote) is identified by the 'pnCommonEventDescr' object. Note that this notification is quite different from pnCommonEventInterfaceSpeedMismatch, which compares the local and remote interfaces on the same Peribit device.
NOTIFICATION-TYPE    
  pnCommonEventDescr  

pnCommonEventIpsecSecurityAssociationAdded 1.3.6.1.4.1.8239.2.1.3.2.0.15
An IPSec security association has been negotiated and added to security association database.
NOTIFICATION-TYPE    
  pnCommonEventDescr  

pnCommonEventIpsecSecurityAssociationExpired 1.3.6.1.4.1.8239.2.1.3.2.0.16
An IPSec security association has been deleted from the security association database.
NOTIFICATION-TYPE    
  pnCommonEventDescr  

pnCommonEventIpsecSecurityAssociationDeleted 1.3.6.1.4.1.8239.2.1.3.2.0.17
An IPSec security association has been deleted from the security association database.
NOTIFICATION-TYPE    
  pnCommonEventDescr