PLEXCOM-MIB

File: PLEXCOM-MIB.mib (71483 bytes)

Imported modules

RFC1155-SMI RFC-1215 RFC-1212
RFC1213-MIB

Imported symbols

enterprises Counter TRAP-TYPE
OBJECT-TYPE DisplayString

Defined Objects

plexcom 1.3.6.1.4.1.465
OBJECT IDENTIFIER    

plxNode 1.3.6.1.4.1.465.1
OBJECT IDENTIFIER    

plxAgent 1.3.6.1.4.1.465.1.1
OBJECT IDENTIFIER    

plxStBridgeagent 1.3.6.1.4.1.465.1.1.1
OBJECT IDENTIFIER    

plxStBridgesnmpd 1.3.6.1.4.1.465.1.1.1.1
OBJECT IDENTIFIER    

plxPlexcomHub8091 1.3.6.1.4.1.465.1.1.1.1.4
OBJECT IDENTIFIER    

plxPlexcomHub8039 1.3.6.1.4.1.465.1.1.1.1.5
OBJECT IDENTIFIER    

plxPlexcomHub8029 1.3.6.1.4.1.465.1.1.1.1.6
OBJECT IDENTIFIER    

plxPlexcomHub8093 1.3.6.1.4.1.465.1.1.1.1.7
OBJECT IDENTIFIER    

plxRepeaterAgent 1.3.6.1.4.1.465.1.1.2
OBJECT IDENTIFIER    

plxPlexcom8025 1.3.6.1.4.1.465.1.1.2.1
OBJECT IDENTIFIER    

plxPlexcom8025SX 1.3.6.1.4.1.465.1.1.2.1.1
OBJECT IDENTIFIER    

plxPlexcom8025SXT 1.3.6.1.4.1.465.1.1.2.1.2
OBJECT IDENTIFIER    

plxPlexcomH8025SXT 1.3.6.1.4.1.465.1.1.2.1.3
OBJECT IDENTIFIER    

plxPlexcomH8025SX 1.3.6.1.4.1.465.1.1.2.1.4
OBJECT IDENTIFIER    

plxPlexcomS8025SXT 1.3.6.1.4.1.465.1.1.2.1.5
OBJECT IDENTIFIER    

plxPlexcomS8025SX 1.3.6.1.4.1.465.1.1.2.1.6
OBJECT IDENTIFIER    

plxPlexcomPlexSTACK 1.3.6.1.4.1.465.1.1.2.2
OBJECT IDENTIFIER    

plxPlexcom4000i 1.3.6.1.4.1.465.1.1.2.2.1
OBJECT IDENTIFIER    

plxPlexcom4000iR 1.3.6.1.4.1.465.1.1.2.2.2
OBJECT IDENTIFIER    

plxSwitchAgent 1.3.6.1.4.1.465.1.1.3
OBJECT IDENTIFIER    

plxPlexcom5108 1.3.6.1.4.1.465.1.1.3.1
OBJECT IDENTIFIER    

plxModule 1.3.6.1.4.1.465.1.2
OBJECT IDENTIFIER    

plxModuleUnknown 1.3.6.1.4.1.465.1.2.1
OBJECT IDENTIFIER    

plxModule8010 1.3.6.1.4.1.465.1.2.2
OBJECT IDENTIFIER    

plxModule8011 1.3.6.1.4.1.465.1.2.3
OBJECT IDENTIFIER    

plxModule8023A 1.3.6.1.4.1.465.1.2.4
OBJECT IDENTIFIER    

plxModule8024A 1.3.6.1.4.1.465.1.2.5
OBJECT IDENTIFIER    

plxModule8024T 1.3.6.1.4.1.465.1.2.6
OBJECT IDENTIFIER    

plxModule8026A 1.3.6.1.4.1.465.1.2.7
OBJECT IDENTIFIER    

plxModule8026T 1.3.6.1.4.1.465.1.2.8
OBJECT IDENTIFIER    

plxModule8029M 1.3.6.1.4.1.465.1.2.9
OBJECT IDENTIFIER    

plxModule8091M 1.3.6.1.4.1.465.1.2.10
OBJECT IDENTIFIER    

plxModule8023 1.3.6.1.4.1.465.1.2.11
OBJECT IDENTIFIER    

plxModule8031 1.3.6.1.4.1.465.1.2.13
OBJECT IDENTIFIER    

plxModule8031A 1.3.6.1.4.1.465.1.2.14
OBJECT IDENTIFIER    

plxModule8033 1.3.6.1.4.1.465.1.2.15
OBJECT IDENTIFIER    

plxModule8034 1.3.6.1.4.1.465.1.2.16
OBJECT IDENTIFIER    

plxModule8033A 1.3.6.1.4.1.465.1.2.17
OBJECT IDENTIFIER    

plxModule8024FO 1.3.6.1.4.1.465.1.2.24
OBJECT IDENTIFIER    

plxModule8039M 1.3.6.1.4.1.465.1.2.32
OBJECT IDENTIFIER    

plxModule8039S 1.3.6.1.4.1.465.1.2.33
OBJECT IDENTIFIER    

plxModule8026FO 1.3.6.1.4.1.465.1.2.34
OBJECT IDENTIFIER    

plxModule8408 1.3.6.1.4.1.465.1.2.35
OBJECT IDENTIFIER    

plxModule8400FO 1.3.6.1.4.1.465.1.2.36
OBJECT IDENTIFIER    

plxModule8032-R 1.3.6.1.4.1.465.1.2.43
OBJECT IDENTIFIER    

plxModule8032-1P 1.3.6.1.4.1.465.1.2.45
OBJECT IDENTIFIER    

plxModule8032-2P 1.3.6.1.4.1.465.1.2.47
OBJECT IDENTIFIER    

plxModule8032-4P 1.3.6.1.4.1.465.1.2.51
OBJECT IDENTIFIER    

plxModule8032-6P 1.3.6.1.4.1.465.1.2.55
OBJECT IDENTIFIER    

plxModule2008SX 1.3.6.1.4.1.465.1.2.56
OBJECT IDENTIFIER    

plxModule8035 1.3.6.1.4.1.465.1.2.58
OBJECT IDENTIFIER    

plxModule8035STP 1.3.6.1.4.1.465.1.2.59
OBJECT IDENTIFIER    

plxModule8036 1.3.6.1.4.1.465.1.2.60
OBJECT IDENTIFIER    

plxModule8023SX 1.3.6.1.4.1.465.1.2.70
OBJECT IDENTIFIER    

plxModule8012SX-1 1.3.6.1.4.1.465.1.2.71
OBJECT IDENTIFIER    

plxModule8012SX-6 1.3.6.1.4.1.465.1.2.72
OBJECT IDENTIFIER    

plxModule8024SX 1.3.6.1.4.1.465.1.2.73
OBJECT IDENTIFIER    

plxModule8027SX 1.3.6.1.4.1.465.1.2.74
OBJECT IDENTIFIER    

plxModule8091SXM 1.3.6.1.4.1.465.1.2.75
OBJECT IDENTIFIER    

plxModule8029SX-3M 1.3.6.1.4.1.465.1.2.76
OBJECT IDENTIFIER    

plxModule8029SX-3S 1.3.6.1.4.1.465.1.2.77
OBJECT IDENTIFIER    

plxModule8025SX 1.3.6.1.4.1.465.1.2.78
OBJECT IDENTIFIER    

plxModule8025SXT 1.3.6.1.4.1.465.1.2.79
OBJECT IDENTIFIER    

plxModuleH8025SX 1.3.6.1.4.1.465.1.2.81
OBJECT IDENTIFIER    

plxModuleS8025SXT 1.3.6.1.4.1.465.1.2.82
OBJECT IDENTIFIER    

plxModuleS8025SX 1.3.6.1.4.1.465.1.2.83
OBJECT IDENTIFIER    

plxModule8408FO 1.3.6.1.4.1.465.1.2.84
OBJECT IDENTIFIER    

plxModule8012SX-2 1.3.6.1.4.1.465.1.2.85
OBJECT IDENTIFIER    

plxModule8012SX-4 1.3.6.1.4.1.465.1.2.86
OBJECT IDENTIFIER    

plxModule8026SX 1.3.6.1.4.1.465.1.2.88
OBJECT IDENTIFIER    

plxModule8035SX 1.3.6.1.4.1.465.1.2.89
OBJECT IDENTIFIER    

plxModuleP8035SX 1.3.6.1.4.1.465.1.2.90
OBJECT IDENTIFIER    

plxModule8093SXM 1.3.6.1.4.1.465.1.2.91
OBJECT IDENTIFIER    

plxModule8093SXS 1.3.6.1.4.1.465.1.2.92
OBJECT IDENTIFIER    

plxModule8039SXM 1.3.6.1.4.1.465.1.2.93
OBJECT IDENTIFIER    

plxModule8039SXS 1.3.6.1.4.1.465.1.2.94
OBJECT IDENTIFIER    

plxFilterTable 1.3.6.1.4.1.465.2
OBJECT IDENTIFIER    

plxFtConfig 1.3.6.1.4.1.465.2.1
OBJECT IDENTIFIER    

plxFtMaxAge 1.3.6.1.4.1.465.2.1.1
Maximum age of a filter table entry before it is deleted from the table. The value is multiplied by plxFtAgeTime (update timer interval) to form the timer value in seconds.
OBJECT-TYPE    
  INTEGER  

plxFtMaxRemove 1.3.6.1.4.1.465.2.1.2
When the filter table is full and new entries need to be made, the oldest plxFtMaxRemove number of entries are removed.
OBJECT-TYPE    
  INTEGER  

plxFtMaxFilter 1.3.6.1.4.1.465.2.1.3
Size of the filter table.
OBJECT-TYPE    
  INTEGER  

plxFtAgeTime 1.3.6.1.4.1.465.2.1.4
Filter table age timer interval. The filter entry age is incremented every plxFtAgeTime seconds.
OBJECT-TYPE    
  INTEGER  

plxFtMaxPerm 1.3.6.1.4.1.465.2.1.5
Max number of permanent filter table entries. Setting this value to zero clears all permanent and dynamic entries from the filter table. Any other set is ignored.
OBJECT-TYPE    
  INTEGER  

plxFtForwMBcast 1.3.6.1.4.1.465.2.1.6
Enable or disable forwarding of broadcasts and multicasts.
OBJECT-TYPE    
  INTEGER noForward(0), forward(1)  

plxFtSecureMode 1.3.6.1.4.1.465.2.1.7
Enable or disable 'secure' mode. In 'secure' mode the bridge does not learn filter table entries dynamically.
OBJECT-TYPE    
  INTEGER normal(0), secure(1)  

plxFtEntry 1.3.6.1.4.1.465.2.2
OBJECT IDENTIFIER    

plxFtAge 1.3.6.1.4.1.465.2.2.1
Filter table entry age. Instance is a six element object identifier representing the MAC address.
OBJECT-TYPE    
  INTEGER  

plxFtDisp 1.3.6.1.4.1.465.2.2.2
Filter table entry disposition. Instance is a six element object identifier representing the MAC address.
OBJECT-TYPE    
  INTEGER dynamforw1(4), dynamforw2(8), dynamflood(16), dynamdiscard(32), statforw1(5), statforw2(9), statflood(17), statdiscard(33), syssendup(67), sysdiscard(35), sysflood(83)  

plxInterfaceErrors 1.3.6.1.4.1.465.3
OBJECT IDENTIFIER    

plxIfeInBusErr 1.3.6.1.4.1.465.3.1
Bus read errors (Ethernet chip error).
OBJECT-TYPE    
  Counter  

plxIfeInShortPkt 1.3.6.1.4.1.465.3.2
Short frames received.
OBJECT-TYPE    
  Counter  

plxIfeInAlgError 1.3.6.1.4.1.465.3.3
Frames received with bad alignment.
OBJECT-TYPE    
  Counter  

plxIfeInBadSize 1.3.6.1.4.1.465.3.4
Frames received with bad length.
OBJECT-TYPE    
  Counter  

plxIfeInOverflow 1.3.6.1.4.1.465.3.5
Receive buffer overflow errors.
OBJECT-TYPE    
  Counter  

plxIfeInCRCErr 1.3.6.1.4.1.465.3.6
Frames received with CRC errors.
OBJECT-TYPE    
  Counter  

plxIfeOutCol16 1.3.6.1.4.1.465.3.7
Frames discarded due to excess collisions.
OBJECT-TYPE    
  Counter  

plxIfeOutCol 1.3.6.1.4.1.465.3.8
Transmit collisions.
OBJECT-TYPE    
  Counter  

plxIfeOutShortPkt 1.3.6.1.4.1.465.3.9
Short packets transmitted (Ethernet chip error).
OBJECT-TYPE    
  Counter  

plxIfeOutUnderflow 1.3.6.1.4.1.465.3.10
Transmit buffer underflow.
OBJECT-TYPE    
  Counter  

plxIfeOutBusErr 1.3.6.1.4.1.465.3.11
Bus write errors (Ethernet chip error).
OBJECT-TYPE    
  Counter  

plxForwardCounters 1.3.6.1.4.1.465.4
OBJECT IDENTIFIER    

plxPanicMesgTrap 1.3.6.1.4.1.465.4
The plxPanicMesgTrap trap is generated when the agent resets for a reason other than a normal hardware reset or restart condition. The plxSysPanicMesg variable contains a textual explanation for the reset, as saved in non-volatile memory.
TRAP-TYPE    
  plxSysPanicMesg  

plxFcInOctets 1.3.6.1.4.1.465.4.1
Received bytes.
OBJECT-TYPE    
  Counter  

plxFcInPkts 1.3.6.1.4.1.465.4.2
Received frames.
OBJECT-TYPE    
  Counter  

plxFcInNUcastPkts 1.3.6.1.4.1.465.4.3
Received multicast and broadcast frames.
OBJECT-TYPE    
  Counter  

plxFcForwOctets 1.3.6.1.4.1.465.4.4
Forwarded bytes.
OBJECT-TYPE    
  Counter  

plxFcForwPkts 1.3.6.1.4.1.465.4.5
Forward frames.
OBJECT-TYPE    
  Counter  

plxFcFiltOctets 1.3.6.1.4.1.465.4.6
Filtered bytes.
OBJECT-TYPE    
  Counter  

plxFcFiltPkts 1.3.6.1.4.1.465.4.7
Filtered frames.
OBJECT-TYPE    
  Counter  

plxSystemCounters 1.3.6.1.4.1.465.5
OBJECT IDENTIFIER    

plxGenericHubTrap 1.3.6.1.4.1.465.5
The generic hub trap is sent when one of several changes occurs in the status of the agent. There are three conditions which may cause this: the addition or deletion of a group (usually a module) from the agent (or chassis), in which case the plxGroupType variable is returned, and changes in the autopartition or link states of a given port, in which case the plxPortAutoPartState or plxPortLinkState variables are returned, respectively.
TRAP-TYPE    
  plxPortLinkState  
  plxPortAutoPartState  
  plxGroupType  

plxSysMemFree 1.3.6.1.4.1.465.5.1
Amount of memory free of a particular size. Instance is the memory block size.
OBJECT-TYPE    
  Counter  

plxSysMemAllocFail 1.3.6.1.4.1.465.5.2
Number of times an allocation of a particular size was denied due to no buffers. Instance is the buffer size.
OBJECT-TYPE    
  Counter  

plxSysMemTotAllocFail 1.3.6.1.4.1.465.5.3
Total number of memory allocation failures.
OBJECT-TYPE    
  Counter  

plxSysMemFreeFail 1.3.6.1.4.1.465.5.4
Count of deallocation failures due to inconsistent function arguments.
OBJECT-TYPE    
  Counter  

plxSysMemAllocTooBig 1.3.6.1.4.1.465.5.5
Number of times a memory allocation was denied because the buffer size was too large.
OBJECT-TYPE    
  Counter  

plxSysTimeToReset 1.3.6.1.4.1.465.5.6
Amount of time (seconds) until the agent will reset. Setting this to any non-zero value will cause a reset.
OBJECT-TYPE    
  Counter  

plxSysPanicMesg 1.3.6.1.4.1.465.5.7
The message printed on the console before the last system crash, or a probable cause of the last crash.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

plxSysResetCount 1.3.6.1.4.1.465.5.8
Number of times the device has been reset (not including power recycles).
OBJECT-TYPE    
  Counter  

plxSysSoftwareVersion 1.3.6.1.4.1.465.5.10
The version of software currently functioning in the system.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

plxSpanningTree 1.3.6.1.4.1.465.6
OBJECT IDENTIFIER    

plxSecurityViolationTrap 1.3.6.1.4.1.465.6
The security violation trap is sent when an alarm occurs in the agent that indicates a configured security provision has been violated. In conjunture with the plxIntruderControlTable, this trap is sent when an non-allowed intruder source address is detected on a port. In this case, the plxIcCurrentSourceAddress variable is returned indicating the violating address on the affected port.
TRAP-TYPE    
  plxIcCurrentSourceAddress  

plxStBridge 1.3.6.1.4.1.465.6.1
OBJECT IDENTIFIER    

plxStBrName 1.3.6.1.4.1.465.6.1.1
Printable bridge name.
OBJECT-TYPE    
  OCTET STRING  

plxStBrIdent 1.3.6.1.4.1.465.6.1.2
Bridge identifier (8 bytes).
OBJECT-TYPE    
  OCTET STRING  

plxStBrMaxAge 1.3.6.1.4.1.465.6.1.3
Bridge default 802.1 Max Age parameter.
OBJECT-TYPE    
  INTEGER  

plxStBrHelloTime 1.3.6.1.4.1.465.6.1.4
Bridge default 802.1 Hello Time parameter.
OBJECT-TYPE    
  INTEGER  

plxStBrForwDelay 1.3.6.1.4.1.465.6.1.5
Bridge default 802.1 Forward Delay parameter.
OBJECT-TYPE    
  INTEGER  

plxStBrIsRoot 1.3.6.1.4.1.465.6.1.6
Flag indicating if the bridge is the root.
OBJECT-TYPE    
  INTEGER notroot(0), isroot(1)  

plxStBrIsDesig 1.3.6.1.4.1.465.6.1.7
Flag indicating if the bridge is designated for a LAN.
OBJECT-TYPE    
  INTEGER notdesig(0), isdesig(1)  

plxStBrSpanAddr 1.3.6.1.4.1.465.6.1.8
MAC address used by the Spanning Tree Protocol for sending and receiving Config and Topology change frames.
OBJECT-TYPE    
  OCTET STRING SIZE(6)  

plxStBrPriority 1.3.6.1.4.1.465.6.1.9
802.1 Bridge Priority parameter.
OBJECT-TYPE    
  INTEGER  

plxStBrSTPDisabled 1.3.6.1.4.1.465.6.1.10
Flag used to enable or disable 802.1 Spanning Tree Protocol operation.
OBJECT-TYPE    
  INTEGER enabled(0), disabled(1)  

plxStRoot 1.3.6.1.4.1.465.6.2
OBJECT IDENTIFIER    

plxStRtIdent 1.3.6.1.4.1.465.6.2.1
Root 802.1 Bridge Identifier.
OBJECT-TYPE    
  OCTET STRING  

plxStRtCost 1.3.6.1.4.1.465.6.2.2
Root path cost.
OBJECT-TYPE    
  INTEGER  

plxStRtPort 1.3.6.1.4.1.465.6.2.3
Root port number.
OBJECT-TYPE    
  INTEGER rootPort1(1), rootPort2(2)  

plxStRtMaxAge 1.3.6.1.4.1.465.6.2.4
Root 802.1 Max Age parameter.
OBJECT-TYPE    
  INTEGER  

plxStRtHelloTime 1.3.6.1.4.1.465.6.2.5
Root 802.1 Hello Time parameter.
OBJECT-TYPE    
  INTEGER  

plxStRtForwDelay 1.3.6.1.4.1.465.6.2.6
Root 802.1 Forward Delay parameter.
OBJECT-TYPE    
  INTEGER  

plxStPort 1.3.6.1.4.1.465.6.3
OBJECT IDENTIFIER    

plxStPrtState 1.3.6.1.4.1.465.6.3.1
802.1 Port State.
OBJECT-TYPE    
  INTEGER disabled(0), blocking(1), listening(2), learning(4), forwarding(8)  

plxStPrtCost 1.3.6.1.4.1.465.6.3.2
802.1 Port cost parameter.
OBJECT-TYPE    
  INTEGER  

plxStPrtIsDesig 1.3.6.1.4.1.465.6.3.3
Flag indicating if this port is designated.
OBJECT-TYPE    
  INTEGER notdesig(0), isdesig(1)  

plxStPrtIsRoot 1.3.6.1.4.1.465.6.3.4
Flag indicating if this is the root port.
OBJECT-TYPE    
  INTEGER notroot(0), isroot(1)  

plxStPrtDesigRoot 1.3.6.1.4.1.465.6.3.5
802.1 Bridge Identifier of the Designated Root for this port.
OBJECT-TYPE    
  OCTET STRING  

plxStPrtDesigCost 1.3.6.1.4.1.465.6.3.6
Designated cost for this port.
OBJECT-TYPE    
  INTEGER  

plxStPrtDesigBridge 1.3.6.1.4.1.465.6.3.7
Designated bridge for this port.
OBJECT-TYPE    
  OCTET STRING  

plxStPrtDesigPort 1.3.6.1.4.1.465.6.3.8
Designated port.
OBJECT-TYPE    
  INTEGER  

plxStPrtPriority 1.3.6.1.4.1.465.6.3.9
Port priority.
OBJECT-TYPE    
  INTEGER  

plxSpanTreeStats 1.3.6.1.4.1.465.6.4
OBJECT IDENTIFIER    

plxStsTopoChanges 1.3.6.1.4.1.465.6.4.1
Topology changes detected.
OBJECT-TYPE    
  Counter  

plxStsConfigTimeout 1.3.6.1.4.1.465.6.4.2
Configuration timeouts.
OBJECT-TYPE    
  Counter  

plxStsPortDisable 1.3.6.1.4.1.465.6.4.3
Count of port disables.
OBJECT-TYPE    
  Counter  

plxStsPortEnable 1.3.6.1.4.1.465.6.4.4
Count of port enables.
OBJECT-TYPE    
  Counter  

plxStsInBadLen 1.3.6.1.4.1.465.6.4.5
802.1 frames received with bad length.
OBJECT-TYPE    
  Counter  

plxStsInUnknown 1.3.6.1.4.1.465.6.4.6
802.1 frames received with bad frame type.
OBJECT-TYPE    
  Counter  

plxStsIn8021Man 1.3.6.1.4.1.465.6.4.7
802.1 Management frames received (discarded by bridge).
OBJECT-TYPE    
  Counter  

plxStsInConfig 1.3.6.1.4.1.465.6.4.8
802.1 Config frames received.
OBJECT-TYPE    
  Counter  

plxStsInTopoChg 1.3.6.1.4.1.465.6.4.9
802.1 Topology change notification frames received.
OBJECT-TYPE    
  Counter  

plxStsOutConfig 1.3.6.1.4.1.465.6.4.10
802.1 Config frames sent.
OBJECT-TYPE    
  Counter  

plxStsOutTopoChg 1.3.6.1.4.1.465.6.4.11
802.1 Topology change notification frames sent.
OBJECT-TYPE    
  Counter  

plxFilterRange 1.3.6.1.4.1.465.7
OBJECT IDENTIFIER    

plxFrNumRange 1.3.6.1.4.1.465.7.1
The maximum number of filter range table entries when read (GET). Set to zero to delete all filter range table entries. A set with any other value is ignored.
OBJECT-TYPE    
  INTEGER  

plxFrEntry 1.3.6.1.4.1.465.7.2
Filter range table entry. Instance is the range table number (1 to plxFrNumRange). Each entry has the following format: uchar frLowDest[6]; /* low bound of destination */ uchar frLowSrc[6]; /* low bound of source */ ushort frLowType; /* low bound of type */ uchar frHighDest[6]; /* high bound of destination */ uchar frHighSrc[6]; /* high bound of source */ ushort frHighType; /* high bound of type */ uchar frflag; /* disposition flag */ unchar frfill; /* round up size */ The LowType and HighType are in network byte order (Motorola 68K). The flag is one of the bridge filter table disposition values.
OBJECT-TYPE    
  OCTET STRING  

plxPlexcomProp 1.3.6.1.4.1.465.9
OBJECT IDENTIFIER    

plxPlexAsync 1.3.6.1.4.1.465.9.1
Plexcom 8090 proprietary management frame. Instance is '0'. This info is available in published form by using the 'plxHub' variables.
OBJECT-TYPE    
  OCTET STRING  

plxPlexStat 1.3.6.1.4.1.465.9.2
Status of Plexcom 8090 management module as deduced by response to poll. Instance is '0'.
OBJECT-TYPE    
  INTEGER down(0), up(1)  

plxPlexBkBits 1.3.6.1.4.1.465.9.3
Plexcom 8091 proprietary management frame. Instance is '0'. This info is available in a decoded form by using the 'plxHub' variables. Structure for SET (size 104): #define MAX_SLOTS 13 #define SLOT_INFO_SIZE 8 char module_set_prop[MAX_SLOTS][SLOT_INFO_SIZE] Structure for GET (size 208): char module_set_prop[MAX_SLOTS][SLOT_INFO_SIZE] char module_get_prop[MAX_SLOTS][SLOT_INFO_SIZE] Contents of 'module_set_prop' and 'module_get_prop' is proprietary.
OBJECT-TYPE    
  OCTET STRING  

plxPlexBkDef 1.3.6.1.4.1.465.9.4
Plexcom module definition. Instance is module type, 'plxGroupType'.
OBJECT-TYPE    
  OCTET STRING  

plxHub 1.3.6.1.4.1.465.10
OBJECT IDENTIFIER    

plxHmBasicHubTable 1.3.6.1.4.1.465.10.1
Table containing global info for a hub.
OBJECT-TYPE    
  SEQUENCE OF  
    PlxHmBasicHubEntry

plxHmBasicHubEntry 1.3.6.1.4.1.465.10.1.1
OBJECT-TYPE    
  PlxHmBasicHubEntry  

plxHubBasicID 1.3.6.1.4.1.465.10.1.1.1
Hub ID (MAC address of management port).
OBJECT-TYPE    
  OCTET STRING SIZE(6)  

plxHubGroupCapacity 1.3.6.1.4.1.465.10.1.1.2
The number of slots available in the hub.
OBJECT-TYPE    
  INTEGER 1..255  

plxHubGroupMap 1.3.6.1.4.1.465.10.1.1.3
A sequence of bytes defining which hub slots are populated with groups (cards or groups). The first byte of the sequence represents slot 1, the second byte slot 2, etc. A value of '1' indicates presence of a group and '0' indicates an absence.
OBJECT-TYPE    
  OCTET STRING  

plxHubGroupCount 1.3.6.1.4.1.465.10.1.1.4
The number of groups currently active in the hub.
OBJECT-TYPE    
  INTEGER 1..255  

plxHmBasicGroupTable 1.3.6.1.4.1.465.10.2
A table of info for each hub module.
OBJECT-TYPE    
  SEQUENCE OF  
    PlxHmBasicGroupEntry

plxHmBasicGroupEntry 1.3.6.1.4.1.465.10.2.1
OBJECT-TYPE    
  PlxHmBasicGroupEntry  

plxGroupHubBasicID 1.3.6.1.4.1.465.10.2.1.1
Hub identifier (MAC address of management port).
OBJECT-TYPE    
  OCTET STRING SIZE(6)  

plxGroupBasicID 1.3.6.1.4.1.465.10.2.1.2
Group identifier (module or slot number). First (left/bottom) slot is 1.
OBJECT-TYPE    
  INTEGER slot1(1), slot2(2), slot3(3), slot4(4), slot5(5), slot6(6), slot7(7), slot8(8), slot9(9), slot10(10), slot11(11), slot12(12), slot13(13), slot14(14), slot15(15), slot16(16)  

plxGroupNumberOfPorts 1.3.6.1.4.1.465.10.2.1.3
Number of ports in this group.
OBJECT-TYPE    
  INTEGER 1..16  

plxGroupType 1.3.6.1.4.1.465.10.2.1.4
Group (module) type.
OBJECT-TYPE    
  INTEGER removed(0), unknown(1), m8010(2), m8011(3), m8023A(4), m8024A(5), m8024T(6), m8026A(7), m8026T(8), m8029M(9), m8091M(10), m8023(11), m8031(13), m8031A(14), m8033(15), m8034(16), m8033A(17), m8024FO(24), m8039M(32), m8039S(33), m8026FO(34), m8408(35), m8400FO(36), m8032-R(43), m8032-1P(44), m8032-1PR(45), m8032-2P(46), m8032-2PR(47), m8032-3P(48), m8032-3PR(49), m8032-4P(50), m8032-4PR(51), m8032-5P(52), m8032-5PR(53), m8032-6P(54), m8032-6PR(55), m2008SX(56), m8035(58), m8035STP(59), m8036(60), m8023SX(70), m8012SX-1(71), m8012SX-6(72), m8024SX(73), m8027SX(74), m8091SXM(75), m8029SX-3M(76), m8029SX-3S(77), m8025SX(78), m8025SXT(79), mH8025SX(81), mS8025SXT(82), mS8025SX(83), m8408FO(84), m8012SX-2(85), m8012SX-4(86), m8012SX-12(87), m8026SX(88), m8035SX(89), mP8035SX(90), m8093SXM(91), m8093SXS(92), m8039SXM(93), m8039SXS(94), m4000i(1000), m4000iR(1001), m4012(1010), m4012i(1011), m4012iR(1012), m4024(1020), m4024i(1021), m4024iR(1022), m4036(1030), m4036i(1031), m4036iR(1032), m4112(1110), m4112i(1111), m4112iR(1112), m4124(1120), m4124i(1121), m4124iR(1122), m4136(1130), m4136i(1131), m4136iR(1132)  

plxGroupAutoPartState 1.3.6.1.4.1.465.10.2.1.5
A sequence of bytes defining the auto-partition state of each port. The first byte corresponds to port 1, the second byte to port 2, etc. The value of each element is of the same type as the 'plxPortAutoPartState' variable.
OBJECT-TYPE    
  OCTET STRING  

plxGroupAdminState 1.3.6.1.4.1.465.10.2.1.6
A sequence of bytes defining the enable state of each port. The first byte corresponds to port 1, the second byte to port 2, etc. The value of each element is of the same type as the 'plxPortAdminState' variable.
OBJECT-TYPE    
  OCTET STRING  

plxGroupCascadeConfig 1.3.6.1.4.1.465.10.2.1.7
An integer defining the configuration control of bussed cascade networks. For PlexNet SX products, this variable is only applicable to 23SX, 24SX, 27SX, etc. modules, and not the 91SX, 29SX, etc. modules. A value of '1' is returned for modules which don't support the variable. A '2' indicates local configuration, meaning the hardware switch has been set on the board to control the cascade network based on hardware switches, and to disallow setting of the cascade network by remote management. A value of '3' indicates remote configuration, meaning the hardware switch is set to allow remote configuration of the cascade networks.
OBJECT-TYPE    
  INTEGER unknown(1), local(2), remote(3)  

plxGroupCascadeNetwork 1.3.6.1.4.1.465.10.2.1.8
A sequence of bytes defining the selected bussed cascade network. A value of '9' indicates no cascade network selected. This can be SET only on device types. A value of '1' through '4' indicates the selected cascade network. A value of '8' (SET only) is used to set the device to use its hardware switches to select the cascade network. For PlexNet 8091SX and 8029SX type modules, the first byte represents port 1's internal network and the second byte port 2's internal network. A value of '10' (hex a) is returned for any module which does not support bussed cascade networks.
OBJECT-TYPE    
  OCTET STRING  

plxGroupLinkState 1.3.6.1.4.1.465.10.2.1.9
A sequence of bytes defining the link state of each port. The first byte corresponds to port 1, the second byte to port 2, etc. The value of each element is of the same type as the 'plxPortLinkState' variable.
OBJECT-TYPE    
  OCTET STRING  

plxGroupLinkPartTrapEnable 1.3.6.1.4.1.465.10.2.1.10
A sequence of bytes defining the enabling state for generation of link and partition change traps from each port. The first byte corresponds to port 1, the second byte to port 2, etc. A value of '2' indicates trap generation for the corresponding port is disabled and a value of '3' indicates enabled.
OBJECT-TYPE    
  OCTET STRING  

plxGroupNetworkSegment 1.3.6.1.4.1.465.10.2.1.11
The network segment that the corresponding group is currently operating on. This is the 'repeater' number used when accessing statistical information from the agent via other standard MIBs. The value '255' (hex ff) is returned if not applicable.
OBJECT-TYPE    
  OCTET STRING  

plxGroupChassisNo 1.3.6.1.4.1.465.10.2.1.12
The number or id of the physical enclosure that the corresponding group is operating in. This variable maps a logical grouping of ports into a physical grouping. The value '1' is returned for systems in which all groups reside in the same physical enclosure.
OBJECT-TYPE    
  INTEGER  

plxHmBasicPortTable 1.3.6.1.4.1.465.10.3
A table of info for the ports within a hub module. The instance of each element is 'GroupID.PortID'. For example, the Admin State of port 3 of slot 2 is 'plxPortAdminState.2.3'.
OBJECT-TYPE    
  SEQUENCE OF  
    PlxHmBasicPortEntry

plxHmBasicPortEntry 1.3.6.1.4.1.465.10.3.1
OBJECT-TYPE    
  PlxHmBasicPortEntry  

plxPortHubBasicID 1.3.6.1.4.1.465.10.3.1.1
Hub identifier (MAC address of management port).
OBJECT-TYPE    
  OCTET STRING SIZE(6)  

plxPortGroupBasicID 1.3.6.1.4.1.465.10.3.1.2
Group identifier (module or slot number). First slot is 1.
OBJECT-TYPE    
  INTEGER slot1(1), slot2(2), slot3(3), slot4(4), slot5(5), slot6(6), slot7(7), slot8(8), slot9(9), slot10(10), slot11(11), slot12(12), slot13(13), slot14(14), slot15(15), slot16(16)  

plxPortBasicID 1.3.6.1.4.1.465.10.3.1.3
Port identifier (number). First port is the leftmost or topmost port of a card and is number 1.
OBJECT-TYPE    
  INTEGER port1(1), port2(2), port3(3), port4(4), port5(5), port6(6), port7(7), port8(8), port9(9), port10(10), port11(11), port12(12), port13(13), port14(14), port15(15), port16(16), port17(17), port18(18), port19(19), port20(20), port21(21), port22(22), port23(23), port24(24), port25(25), port26(26), port27(27), port28(28), port29(29), port30(30), port31(31), port32(32), port33(33), port34(34), port35(35), port36(36), port37(37), port38(38)  

plxPortMauType 1.3.6.1.4.1.465.10.3.1.4
Port physical interface type.
OBJECT-TYPE    
  INTEGER unknown(1), ieeeAui(2), ieeeThin(3), ieee10baseT(4), ieee10base2(5), foirl(6), telco50(7), tokenringutp(10), tokenringstp(11), tokenringcoax(12), tokenringfiber(13), tokenringtelco50(14), internalNet(15), serial(16), as400utp(17), as400fiber(18)  

plxPortAdminState 1.3.6.1.4.1.465.10.3.1.5
Port enable state.
OBJECT-TYPE    
  INTEGER unknown(1), disabled(2), enabled(3)  

plxPortAutoPartState 1.3.6.1.4.1.465.10.3.1.6
Port auto-partition state.
OBJECT-TYPE    
  INTEGER unknown(1), notPart(2), part(3)  

plxPortLinkState 1.3.6.1.4.1.465.10.3.1.7
Port link state.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down(3)  

plxSystemAdmin 1.3.6.1.4.1.465.11
OBJECT IDENTIFIER    

plxSysAdmCommunityTable 1.3.6.1.4.1.465.11.1
A table of SNMP community name entries allowing different levels of SNMP access. A maximum of 5 entries are allowed.
OBJECT-TYPE    
  SEQUENCE OF  
    PlxSysAdmCommunityEntry

plxSysAdmCommunityEntry 1.3.6.1.4.1.465.11.1.1
An entry in the SNMP community table.
OBJECT-TYPE    
  PlxSysAdmCommunityEntry  

plxCommunityIndex 1.3.6.1.4.1.465.11.1.1.1
A unique index for this community table entry.
OBJECT-TYPE    
  INTEGER 1..5  

plxCommunityName 1.3.6.1.4.1.465.11.1.1.2
The community name to which this entry grants access. This string must be unique among the community names defined in all entries of this table. A community name entry does not become effective until the corresponding plxCommunityAccess variable is set to a value other than invalid(100).
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

plxCommunityAccess 1.3.6.1.4.1.465.11.1.1.3
The access level for the community name. This variable must be set to a value of readOnly(1), readWrite(2), or superUser(3) for the corresponding plxCommunityName variable in the table to be valid. A value of readOnly(1) allows 'GET' only privleges on all MIB objects except the community table. A value of readWrite(2) allows 'GET' and 'SET' privleges on all MIB objects except the community table. A value of superUser(3) allows 'GET' and 'SET' privleges on all MIB objects including the community table. The value invalid(100) is returned for invalid table entries. A 'SET' with this value clears the entry from the table.
OBJECT-TYPE    
  INTEGER readOnly(1), readWrite(2), superUser(3), invalid(100)  

plxSysAdmDownload 1.3.6.1.4.1.465.11.2
OBJECT IDENTIFIER    

plxDownloadFileName 1.3.6.1.4.1.465.11.2.1
Name of the file to download via the network to Flash.
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

plxDownloadServerAddress 1.3.6.1.4.1.465.11.2.2
The IP address of the server that contains the file to download.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

plxDownloadAction 1.3.6.1.4.1.465.11.2.3
Setting this object to download(2) initiates a download of system software. The variables plxDownloadServerAddress and plxDownloadFileName must be first set before starting a download. The agent will return the value download(2) when a download is currently in progress. Setting this object to noDownload(1) has no effect. The agent will return this value unless a download is in progress.
OBJECT-TYPE    
  INTEGER noDownload(1), download(2)  

plxDownloadStatus 1.3.6.1.4.1.465.11.2.4
The status of the last download performed. The value downloadSuccess(1) indicates a successful download, and that the device is operating from the downloaded firmware. noDownloadOccurred(2) is returned if no firmware download has yet been performed. If Flash EPROM is not present on the board or is bad, badFlash(3) is returned. The value badServerAddress(4) indicates the IP address of the server configured by the plxDownloadServerAddress variable is bad. badFile(5) indicates the downloaded file had a bad checksum or is corrupt. The value downloadInProgress(14) indicates that a download is currently being performed. The remaining values indicate a TFTP protocol specific failure during the most recent download, and are the error codes defined in RFC 783, offset by six.
OBJECT-TYPE    
  INTEGER downloadSuccess(1), downloadNotOccurred(2), badFlash(3), badServerAddress(4), badFile(5), tftpUndefined(6), tftpFileNotFound(7), tftpAccessViolation(8), tftpIllegalOperation(10), tftpUnknownTransferID(11), downloadInProgress(14)  

plxSysAdmTrapTable 1.3.6.1.4.1.465.11.3
OBJECT-TYPE    
  SEQUENCE OF  
    PlxSysAdmTrapEntry

plxSysAdmTrapEntry 1.3.6.1.4.1.465.11.3.1
OBJECT-TYPE    
  PlxSysAdmTrapEntry  

plxTrapIndex 1.3.6.1.4.1.465.11.3.1.1
This object identifies the entry within the trap table.
OBJECT-TYPE    
  INTEGER  

plxTrapStandardEnable 1.3.6.1.4.1.465.11.3.1.4
Enable or disable generation of standard traps for this entry.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

plxTrapPlexcomEnable 1.3.6.1.4.1.465.11.3.1.5
Enable or disable Plexcom specific trap generation for this entry.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

plxTrapRepeaterEnable 1.3.6.1.4.1.465.11.3.1.6
Enable or disable Repeater MIB specific trap generation for this entry.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

plxTrapNovellEnable 1.3.6.1.4.1.465.11.3.1.7
Enable or disable Novell HMI MIB specific trap generation for this entry.
OBJECT-TYPE    
  INTEGER other(1), disabled(2), enabled(3)  

plxSysAdmMibControl 1.3.6.1.4.1.465.11.4
OBJECT IDENTIFIER    

plxMcZeroStatCounters 1.3.6.1.4.1.465.11.4.1
Zero statistical counters maintained by the managed device. This zeros the port- and network-level performance stats maintained in all MIBs supported by the device. The variable should be set to 'zeroCounters' to clear statistical entries. A value of 'noZero' is returned when this variable is read.
OBJECT-TYPE    
  INTEGER noZero(1), zeroCounters(2)  

plxMcNetworkSelectRptrMib 1.3.6.1.4.1.465.11.4.2
Select the 'repeater number' that the information in the Repeater MIB on the managed device represents. This variable is used for agents which manage multiple repeaters.
OBJECT-TYPE    
  INTEGER  

plxMcNetworkSelectRmonMib 1.3.6.1.4.1.465.11.4.3
Select the 'repeater number' that the information in the RMON MIB on the managed device represents. This variable is used for agents which manage multiple repeaters.
OBJECT-TYPE    
  INTEGER  

plxSecurity 1.3.6.1.4.1.465.12
OBJECT IDENTIFIER    

plxIntruderControlGroupTable 1.3.6.1.4.1.465.12.1
A table of parameters for configuring software-controlled intruder detection for groups of ports.
OBJECT-TYPE    
  SEQUENCE OF  
    PlxIntruderControlGroupEntry

plxIntruderControlGroupEntry 1.3.6.1.4.1.465.12.1.1
An entry in the intruder detection group table.
OBJECT-TYPE    
  PlxIntruderControlGroupEntry  

plxIcGroupGroupIndex 1.3.6.1.4.1.465.12.1.1.1
A unique group index for which this intruder control table entry represents.
OBJECT-TYPE    
  INTEGER  

plxIcGroupAuthorizationType 1.3.6.1.4.1.465.12.1.1.2
The authorization level of the intruder detection on the corresponding group of ports. If set to singleUser(2) (the initial default), alarms will be triggered when more than one source address is detected on a given port. If set to noUser(1), no users are allowed on any port, and an alarm will be triggered if any traffic is generated on a port.
OBJECT-TYPE    
  INTEGER noUser(1), singleUser(2), multiValue(9)  

plxIcGroupAlarmAction 1.3.6.1.4.1.465.12.1.1.3
The action to be taken when an alarm occurs on any port in the corresponding group. If this variable is set to trapOnly(2), the initial default, an SNMP trap will be generated when an intruder detect alarm occurs. If set to disableOnly(3), the port will be disabled when an alarm occurs. If set to trapAndDisable(4), both a trap will be generated and the port will be disabled. If set to none(1), no action will be taken.
OBJECT-TYPE    
  INTEGER none(1), trapOnly(2), disableOnly(3), trapAndDisable(4), multiValue(9)  

plxIcGroupAuthorizedAddressMode 1.3.6.1.4.1.465.12.1.1.4
The method by which the plxIcAuthorizedSourceAddress variable for the corresponding port should be configured. If this variable is set to autoLearn(1), the initial default, the allowed single source address on the port will be configured automatically by the address of the next valid packet on that port. If set to useAuthorized(2), the address as configured by an SNMP SET operation on the plxIcAuthorizedSourceAddress variable will be used.
OBJECT-TYPE    
  INTEGER autoLearn(1), useAuthorized(2), multiValue(9)  

plxIcGroupDetectionStatus 1.3.6.1.4.1.465.12.1.1.5
The current status of the intruder detection on the corresponding port. The initial default for all ports is inactive(1), meaning that intruder detection is not active on the port. If set to active(2), intruder detection is enabled, and this value will then also be returned for an SNMP GET operation. If an alarm is generated, this variable will take on the value triggered(3). A set with the value active(2) will clear the triggered condition back to active. Intruder detection on the port is effectively still active in the triggered condition. The value triggered(3) is illegal for a SET operation.
OBJECT-TYPE    
  INTEGER inactive(1), active(2), triggered(3), multiValue(9)  

plxIntruderControlTable 1.3.6.1.4.1.465.12.2
A table of parameters for configuring software-controlled intruder detection.
OBJECT-TYPE    
  SEQUENCE OF  
    PlxIntruderControlEntry

plxIntruderControlEntry 1.3.6.1.4.1.465.12.2.1
An entry in the intruder detection table.
OBJECT-TYPE    
  PlxIntruderControlEntry  

plxIcGroupIndex 1.3.6.1.4.1.465.12.2.1.1
A unique group index for which this intruder control table entry represents.
OBJECT-TYPE    
  INTEGER  

plxIcPortIndex 1.3.6.1.4.1.465.12.2.1.2
A unique port index for which this intruder control table entry represents.
OBJECT-TYPE    
  INTEGER  

plxIcAuthorizationType 1.3.6.1.4.1.465.12.2.1.3
The authorization level of the intruder detection on the corresponding port. If set to singleUser(2) (the initial default), an alarm will be triggered when more than one source address is detected on the port. If set to noUser(1), no users are allowed on the port, and an alarm will be triggered if any traffic is generated on the port.
OBJECT-TYPE    
  INTEGER noUser(1), singleUser(2)  

plxIcAlarmAction 1.3.6.1.4.1.465.12.2.1.4
The action to be taken when an alarm occurs on the corresponding port. If this variable is set to trapOnly(2), the initial default, an SNMP trap will be generated when an intruder detect alarm occurs. If set to disableOnly(3), the port will be disabled when an alarm occurs. If set to trapAndDisable(4), both a trap will be generated and the port will be disabled. If set to none(1), no action will be taken.
OBJECT-TYPE    
  INTEGER none(1), trapOnly(2), disableOnly(3), trapAndDisable(4)  

plxIcAuthorizedAddressMode 1.3.6.1.4.1.465.12.2.1.5
The method by which the plxIcAuthorizedSourceAddress variable for the corresponding port should be configured. If this variable is set to autoLearn(1), the initial default, the allowed single source address on the port will be configured automatically by the address of the next valid packet on that port. If set to useAuthorized(2), the address as configured by an SNMP SET operation on the plxIcAuthorizedSourceAddress variable will be used.
OBJECT-TYPE    
  INTEGER autoLearn(1), useAuthorized(2)  

plxIcAuthorizedSourceAddress 1.3.6.1.4.1.465.12.2.1.6
The current authorized source address allowed by intruder detection on the corresponding port. This variable is only valid if the plxIcAuthorizationType variable for the port is singleUser(2). This variable must be configured if the plxIcAuthorizedAddressMode variable is set to useAuthorized. If plxIcAuthorizedAddressMode is set to autoLearn, the authorized source address will be automatically configured to be the source address of the last valid packet that was generated from the port (or the next valid packet if the port has had no traffic) after setting the plxIcDetectionStatus variable to active(2).
OBJECT-TYPE    
  OCTET STRING SIZE(6)  

plxIcCurrentSourceAddress 1.3.6.1.4.1.465.12.2.1.7
The source address of the last valid packet that was generated on the corresponding port. If an alarm was generated on the port and the port was disabled based on the setting of plxIcAlarmAction, this variable will contain the source address of the intruding device.
OBJECT-TYPE    
  OCTET STRING SIZE(6)  

plxIcDetectionStatus 1.3.6.1.4.1.465.12.2.1.8
The current status of the intruder detection on the corresponding port. The initial default for all ports is inactive(1), meaning that intruder detection is not active on the port. If set to active(2), intruder detection is enabled, and this value will then also be returned for an SNMP GET operation. If an alarm is generated, this variable will take on the value triggered(3). A set with the value active(2) will clear the triggered condition back to active. Intruder detection on the port is effectively still active in the triggered condition. The value triggered(3) is illegal for a SET operation.
OBJECT-TYPE    
  INTEGER inactive(1), active(2), triggered(3)  

Defined Objects

PlxHmBasicHubEntry  
SEQUENCE    
  OCTET STRING as plxHubBasicID SIZE(6)  
  INTEGER as plxHubGroupCapacity  
  OCTET STRING as plxHubGroupMap  
  INTEGER as plxHubGroupCount  

PlxHmBasicGroupEntry  
SEQUENCE    
  OCTET STRING as plxGroupHubBasicID SIZE(6)  
  INTEGER as plxGroupBasicID  
  INTEGER as plxGroupNumberOfPorts  
  INTEGER as plxGroupType  
  OCTET STRING as plxGroupAutoPartState  
  OCTET STRING as plxGroupAdminState  
  INTEGER as plxGroupCascadeConfig  
  OCTET STRING as plxGroupCascadeNetwork  
  OCTET STRING as plxGroupLinkState  
  OCTET STRING as plxGroupLinkPartTrapEnable  
  OCTET STRING as plxGroupNetworkSegment  
  INTEGER as plxGroupChassisNo  

PlxHmBasicPortEntry  
SEQUENCE    
  OCTET STRING as plxPortHubBasicID SIZE(6)  
  INTEGER as plxPortGroupBasicID  
  INTEGER as plxPortBasicID  
  INTEGER as plxPortMauType  
  INTEGER as plxPortAdminState  
  INTEGER as plxPortAutoPartState  
  INTEGER as plxPortLinkState  

PlxSysAdmCommunityEntry  
SEQUENCE    
  INTEGER as plxCommunityIndex 1..5  
  DisplayString as plxCommunityName SIZE(0..32)  
  INTEGER as plxCommunityAccess  

PlxSysAdmTrapEntry  
SEQUENCE    
  INTEGER as plxTrapIndex  
  INTEGER as plxTrapStandardEnable  
  INTEGER as plxTrapPlexcomEnable  
  INTEGER as plxTrapRepeaterEnable  
  INTEGER as plxTrapNovellEnable  

PlxIntruderControlGroupEntry  
SEQUENCE    
  INTEGER as plxIcGroupGroupIndex  
  INTEGER as plxIcGroupAuthorizationType  
  INTEGER as plxIcGroupAlarmAction  
  INTEGER as plxIcGroupAuthorizedAddressMode  
  INTEGER as plxIcGroupDetectionStatus  

PlxIntruderControlEntry  
SEQUENCE    
  INTEGER as plxIcGroupIndex  
  INTEGER as plxIcPortIndex  
  INTEGER as plxIcAuthorizationType  
  INTEGER as plxIcAlarmAction  
  INTEGER as plxIcAuthorizedAddressMode  
  OCTET STRING as plxIcAuthorizedSourceAddress SIZE(6)  
  OCTET STRING as plxIcCurrentSourceAddress SIZE(6)  
  INTEGER as plxIcDetectionStatus