POWERHUB-CORE-MIB

File: POWERHUB-CORE-MIB.mib (115287 bytes)

Imported modules

RFC1155-SMI RFC-1215 RFC1213-MIB

Imported symbols

enterprises OBJECT-TYPE NetworkAddress
IpAddress Counter Gauge
TimeTicks TRAP-TYPE DisplayString
PhysAddress

Defined Objects

fore 1.3.6.1.4.1.326
OBJECT IDENTIFIER    

systems 1.3.6.1.4.1.326.2
OBJECT IDENTIFIER    

lsd 1.3.6.1.4.1.326.2.6
OBJECT IDENTIFIER    

lsdproducts 1.3.6.1.4.1.326.2.6.1
OBJECT IDENTIFIER    

powerhub4k6k7k 1.3.6.1.4.1.326.2.6.1.1
OBJECT IDENTIFIER    

alchassis 1.3.6.1.4.1.326.2.6.1.1.1
OBJECT IDENTIFIER    

alSlotTable 1.3.6.1.4.1.326.2.6.1.1.1.1
A table that contains information about each slot in the PowerHub 4k6k7k chassis.
OBJECT-TYPE    
  SEQUENCE OF  
    AlSlotEntry

powerFailure 1.3.6.1.4.1.326.2.6.1.1.1.1
The powerFailure trap indicates that powerFailure occured in the particular powersupply unit.
TRAP-TYPE    
  alPSNumber  

alSlotEntry 1.3.6.1.4.1.326.2.6.1.1.1.1.1
Information about a specific slot.
OBJECT-TYPE    
  AlSlotEntry  

alSlotNumber 1.3.6.1.4.1.326.2.6.1.1.1.1.1.1
The slot number for which the following information applies.
OBJECT-TYPE    
  INTEGER  

alSlotCardType 1.3.6.1.4.1.326.2.6.1.1.1.1.1.2
The card type for this slot.
OBJECT-TYPE    
  INTEGER ph7-universalethernet(1), ph7-utp4x4(2), ph7-utp4x6(3), ph7-fddidualdas(4), ph7-fddisingledas(5), ph7-utp16x1(6), ph7-utp13x1(7), ph7-fddidualuniversal(8), ph7-fddisingleuniversal(9), ph7-fddiconcentrator(10), ph7-cddiconcentrator(11), ph4k6k-FL6x1(12), ph4k6k-utp12x1(13), ph4k6k-fddisingledas(14), ph4k6k-ethernet100TX(15), ph4k6k-ethernet100dualTX(16), ph4k6k-ethernet100FXTX(17), ph4k6k-ethernet100FXFX(18), ph4k6k-ethernet100FX(19), ph4k6k-ethernet24x1(20), ph4k6k-ethernet12x1FL(21), ph4k6k-ethernet6x1FL(22), ph4-tenbt-utp(23), ph7-powercell700(24), ph7-6x1fastethernet(25), ph7-10x1FL(26), ph6-powercell600(27), ph7-2x8fastethernet(28), ph7-packetengine1(29), ph7-packetengine2(30)  

alSlotStatus 1.3.6.1.4.1.326.2.6.1.1.1.1.1.3
The status of the card in this slot.
OBJECT-TYPE    
  INTEGER notequipped(1), notpresent(2), presentequipped(3)  

alSlotModel 1.3.6.1.4.1.326.2.6.1.1.1.1.1.4
The model number for this card.
OBJECT-TYPE    
  DisplayString  

alSlotRevision 1.3.6.1.4.1.326.2.6.1.1.1.1.1.5
The revision number for this card.
OBJECT-TYPE    
  DisplayString  

alSlotIssue 1.3.6.1.4.1.326.2.6.1.1.1.1.1.6
The issue number for this slot.
OBJECT-TYPE    
  DisplayString  

alSlotDeviation 1.3.6.1.4.1.326.2.6.1.1.1.1.1.7
The deviation for this slot.
OBJECT-TYPE    
  DisplayString  

alSlotSerialNumber 1.3.6.1.4.1.326.2.6.1.1.1.1.1.8
The serial number of this card this slot.
OBJECT-TYPE    
  DisplayString  

alSlotPower5 1.3.6.1.4.1.326.2.6.1.1.1.1.1.9
The number of milliamps. of current drawn by this slot at 5 Volts.
OBJECT-TYPE    
  INTEGER  

alSlotPower12 1.3.6.1.4.1.326.2.6.1.1.1.1.1.10
The number of milliamps. of current drawn by this slot at 12 Volts.
OBJECT-TYPE    
  INTEGER  

alSlotPower33 1.3.6.1.4.1.326.2.6.1.1.1.1.1.11
The number of milliamps. of current drawn by this slot at 3.3 Volts.
OBJECT-TYPE    
  INTEGER  

alSlotPowerOther 1.3.6.1.4.1.326.2.6.1.1.1.1.1.12
The number of milliamps. of current drawn by this slot at OTHER voltage.
OBJECT-TYPE    
  INTEGER  

alVportTable 1.3.6.1.4.1.326.2.6.1.1.1.2
A table that contains information about each virtual port in the PowerHub 4k6k7k chassis. This table differs from the alSlotToVportTable mainly in how this table is indexed.
OBJECT-TYPE    
  SEQUENCE OF  
    AlVportEntry

boardFailure 1.3.6.1.4.1.326.2.6.1.1.1.2
The boardFailure trap indicates that intelligent card failure occured in the particular slot.
TRAP-TYPE    
  alSlotNumber  

alVportEntry 1.3.6.1.4.1.326.2.6.1.1.1.2.1
Information about a specific virtual port.
OBJECT-TYPE    
  AlVportEntry  

alVportNumber 1.3.6.1.4.1.326.2.6.1.1.1.2.1.1
The virtual port number for which the following information applies.
OBJECT-TYPE    
  INTEGER  

alVportSlotNumber 1.3.6.1.4.1.326.2.6.1.1.1.2.1.2
The slot number which holds the physical port that corresponds to the virtual port of interest.
OBJECT-TYPE    
  INTEGER  

alVportPortNumber 1.3.6.1.4.1.326.2.6.1.1.1.2.1.3
The physical port number on the slot that corresponds to this virtual port number, identified by alVportNumber.
OBJECT-TYPE    
  INTEGER  

alVportPortType 1.3.6.1.4.1.326.2.6.1.1.1.2.1.4
The port type for this virtual port.
OBJECT-TYPE    
  INTEGER bnc(1), fiber(2), aui(3), mauHdx(4), mauFdx(5), fb(6), notstuffed(7), fddiMMMM(8), fddiMMSM(9), fddiMMLC(10), fddiMMUTP(11), fddiMMEMPTY(12), fddiSMMM(13), fddiSMSM(14), fddiSMLC(15), fddiSMUTP(16), fddiSMEMPTY(17), fddiLCMM(18), fddiLCSM(19), fddiLCLC(20), fddiLCUTP(21), fddiLCEMPTY(22), fddiUTPMM(23), fddiUTPSM(24), fddiUTPLC(25), fddiUTPUTP(26), fddiUTPEMPTY(27), fddiEMPTYEMPTY(28), fddiEMPTYMM(29), fddiEMPTYSM(30), fddiEMPTYLC(31), fddiEMPTYUTP(32), fx100base(33), fasteth100fx(34), fasteth100tx(35), atm(36), utp(37), ds3-utp(38), ds3-stp(39), ds3-vmf(40), ds3-lmf(41), ds3-mf(42), ds3-sf(43), ds3-cx(44), e3-utp(45), e3-stp(46), e3-vmf(47), e3-lmf(48), e3-mf(49), e3-sf(50), e3-cx(51), oc3-utp(52), oc3-stp(53), oc3-vmf(54), oc3-lmf(55), oc3-mf(56), oc3-sf(57), oc3-cx(58), oc12-utp(59), oc12-stp(60), oc12-vmf(61), oc12-lmf(62), oc12-mf(63), oc12-sf(64), oc12-cx(65), fema-10-100(66)  

alVportStatus 1.3.6.1.4.1.326.2.6.1.1.1.2.1.5
The port status for this virtual port.
OBJECT-TYPE    
  INTEGER bad(1), removed(2), good(3)  

alVportControllerType 1.3.6.1.4.1.326.2.6.1.1.1.2.1.6
The controller type for this virtual port.
OBJECT-TYPE    
  INTEGER  

alVportDataRateConfig 1.3.6.1.4.1.326.2.6.1.1.1.2.1.7
The data rate requested for this virtual port.
OBJECT-TYPE    
  INTEGER none(1), speed10Mbps(2), speed100Mbps(3)  

alVportOperModeConfig 1.3.6.1.4.1.326.2.6.1.1.1.2.1.8
The operating mode requested for this virtual port.
OBJECT-TYPE    
  INTEGER none(1), normal(2), halfDuplex(3), fullDuplex(4), loopback(5), fullLoopback(6), decLoopback(7)  

alVportAutoNegotiateConfig 1.3.6.1.4.1.326.2.6.1.1.1.2.1.9
The auto-negotiation requested for this virtual port.
OBJECT-TYPE    
  INTEGER none(1), on(2), off(3)  

alVportDataRateStatus 1.3.6.1.4.1.326.2.6.1.1.1.2.1.10
The actual data rate for this virtual port.
OBJECT-TYPE    
  INTEGER undetermined(1), speed10Mbps(2), speed100Mbps(3)  

alVportOperModeStatus 1.3.6.1.4.1.326.2.6.1.1.1.2.1.11
The actual operating mode for this virtual port.
OBJECT-TYPE    
  INTEGER undetermined(1), halfDuplex(2), fullDuplex(3), loopback(4)  

alSlotToVportTable 1.3.6.1.4.1.326.2.6.1.1.1.3
A table that contains information about each port of each slot in the PowerHub 4k6k7k chassis. This table is established as a way to specify the information about a physical port located on a slot in the PowerHub 4k6k7k chassis. This table a slot and port number scheme. This table differs from uses two indices (the slot number and the port number) to identify a port.
OBJECT-TYPE    
  SEQUENCE OF  
    AlSlotVportEntry

alSlotVportEntry 1.3.6.1.4.1.326.2.6.1.1.1.3.1
Information about a specific port in a specific slot. The slot number and the port number in that slot (numbered left to right in ascending order) identifies a specific port.
OBJECT-TYPE    
  AlSlotVportEntry  

alSlotVportSlotNumber 1.3.6.1.4.1.326.2.6.1.1.1.3.1.1
The slot number which holds the port of interest.
OBJECT-TYPE    
  INTEGER  

alSlotVportPortNumber 1.3.6.1.4.1.326.2.6.1.1.1.3.1.2
The physical port number on a slot which represents the port of interest. The physical port is numbered from left to right in a slot.
OBJECT-TYPE    
  INTEGER  

alSlotVportNumber 1.3.6.1.4.1.326.2.6.1.1.1.3.1.3
The virtual port number which corresponds to the port that is identified by the slot and port number. This scheme thereby relates each virtual port to a slot and physical port tuplet.
OBJECT-TYPE    
  INTEGER  

alSlotVportPortType 1.3.6.1.4.1.326.2.6.1.1.1.3.1.4
The port type for this port.
OBJECT-TYPE    
  INTEGER bnc(1), fiber(2), aui(3), mauHdx(4), mauFdx(5), fb(6), notstuffed(7), fddiMMMM(8), fddiMMSM(9), fddiMMLC(10), fddiMMUTP(11), fddiMMEMPTY(12), fddiSMMM(13), fddiSMSM(14), fddiSMLC(15), fddiSMUTP(16), fddiSMEMPTY(17), fddiLCMM(18), fddiLCSM(19), fddiLCLC(20), fddiLCUTP(21), fddiLCEMPTY(22), fddiUTPMM(23), fddiUTPSM(24), fddiUTPLC(25), fddiUTPUTP(26), fddiUTPEMPTY(27), fddiEMPTYEMPTY(28), fddiEMPTYMM(29), fddiEMPTYSM(30), fddiEMPTYLC(31), fddiEMPTYUTP(32), fx100base(33), fasteth100fx(34), fasteth100tx(35), atm(36), utp(37), ds3-utp(38), ds3-stp(39), ds3-vmf(40), ds3-lmf(41), ds3-mf(42), ds3-sf(43), ds3-cx(44), e3-utp(45), e3-stp(46), e3-vmf(47), e3-lmf(48), e3-mf(49), e3-sf(50), e3-cx(51), oc3-utp(52), oc3-stp(53), oc3-vmf(54), oc3-lmf(55), oc3-mf(56), oc3-sf(57), oc3-cx(58), oc12-utp(59), oc12-stp(60), oc12-vmf(61), oc12-lmf(62), oc12-mf(63), oc12-sf(64), oc12-cx(65), fema-10-100(66)  

alSlotVportStatus 1.3.6.1.4.1.326.2.6.1.1.1.3.1.5
The status for this port.
OBJECT-TYPE    
  INTEGER  

alSlotVportControllerType 1.3.6.1.4.1.326.2.6.1.1.1.3.1.6
The controller type for this port.
OBJECT-TYPE    
  INTEGER  

alSlotVportDataRateConfig 1.3.6.1.4.1.326.2.6.1.1.1.3.1.7
The data rate requested for this port. The actual data rate may be different from the requested data rate.
OBJECT-TYPE    
  INTEGER none(1), speed10Mbps(2), speed100Mbps(3)  

alSlotVportOperModeConfig 1.3.6.1.4.1.326.2.6.1.1.1.3.1.8
The operating mode requested for this port.
OBJECT-TYPE    
  INTEGER none(1), normal(2), halfDuplex(3), fullDuplex(4), loopback(5), fullLoopback(6), decLoopback(7)  

alSlotVportAutoNegotiateConfig 1.3.6.1.4.1.326.2.6.1.1.1.3.1.9
The auto-negotiation requested for this port.
OBJECT-TYPE    
  INTEGER none(1), on(2), off(3)  

alSlotVportDataRateStatus 1.3.6.1.4.1.326.2.6.1.1.1.3.1.10
The actual data rate for this port.
OBJECT-TYPE    
  INTEGER undetermined(1), speed10Mbps(2), speed100Mbps(3)  

alSlotVportOperModeStatus 1.3.6.1.4.1.326.2.6.1.1.1.3.1.11
The actual operating mode for this port.
OBJECT-TYPE    
  INTEGER undetermined(1), halfDuplex(2), fullDuplex(3), loopback(4)  

alPSTable 1.3.6.1.4.1.326.2.6.1.1.1.4
A table that contains information about each power supply in the PowerHub 4k6k7k chassis.
OBJECT-TYPE    
  SEQUENCE OF  
    AlPSEntry

alPSEntry 1.3.6.1.4.1.326.2.6.1.1.1.4.1
Information about a specific power supply.
OBJECT-TYPE    
  AlPSEntry  

alPSNumber 1.3.6.1.4.1.326.2.6.1.1.1.4.1.1
The power supply number
OBJECT-TYPE    
  INTEGER  

alPSStatus 1.3.6.1.4.1.326.2.6.1.1.1.4.1.2
The status of the power supply identified by the instance of alPSNumber.
OBJECT-TYPE    
  INTEGER powerGood(1), powerPresentButBad(2), powerNotPresent(3), powerIntermittant(4), powerUnknown(5)  

alCpuSlot 1.3.6.1.4.1.326.2.6.1.1.1.5
The slot number in which the packet engine resides
OBJECT-TYPE    
  INTEGER  

alSlotChassis 1.3.6.1.4.1.326.2.6.1.1.1.6
The maximum number of slots available in the powerhub. Presently it could either be a 5, 10, or 15 slot chassis. This object is used only for PH7000.
OBJECT-TYPE    
  INTEGER slots5(1), slots10(2), slots15(3)  

powerbits 1.3.6.1.4.1.326.2.6.1.2
OBJECT IDENTIFIER    

asn9000 1.3.6.1.4.1.326.2.6.1.3
OBJECT IDENTIFIER    

lsdcommon 1.3.6.1.4.1.326.2.6.2
OBJECT IDENTIFIER    

alsystem 1.3.6.1.4.1.326.2.6.2.1
OBJECT IDENTIFIER    

alChassisType 1.3.6.1.4.1.326.2.6.2.1.1
The model type of the PowerHub
OBJECT-TYPE    
  INTEGER model3100(1), model3200(2), model3300(3), model3500(4), model3401(5), model3402(6), model3403(7), model3404(8), model3405(9), model3406(10), model3407(11), model3410(12), model3411(13), model3412(14), model3420(15), model3421(16), model3422(17), model3423(18), model3424(19), model3425(20), model5001(21), model5002(22), model5003(23), model5004(24), model5005(25), model5006(26), model7000(30), model6000(31), model4000(32), model4100(33), model8000(34)  

alLoginFailure 1.3.6.1.4.1.326.2.6.2.1.1
The login failure trap indicates that the login failed due to some error condition during the login process.
TRAP-TYPE    
  alLastLoginFailureTimeDate  
  alLastLoginFailureUserId  
  alLastLoginFailureReason  
  alLastLoginSourceAddress  

alMcpuRtVer 1.3.6.1.4.1.326.2.6.2.1.2
Runtime software version of the motherboard CPU; it is an ASCII string that describes the version as well as the date and time the software was released from the factory.
OBJECT-TYPE    
  DisplayString  

alMcpuPromVer 1.3.6.1.4.1.326.2.6.2.1.3
PROM software version of the motherboard CPU; it is an ASCII string that describes the version as well as the date and time the software was released from the factory.
OBJECT-TYPE    
  DisplayString  

alFcpuOneRtVer 1.3.6.1.4.1.326.2.6.2.1.4
Runtime software version of F-bus CPU for the first FDDI board.
OBJECT-TYPE    
  DisplayString  

alFcpuTwoRtVer 1.3.6.1.4.1.326.2.6.2.1.5
Runtime software version of F-bus CPU for the second FDDI board.
OBJECT-TYPE    
  DisplayString  

alFcpuOnePromVer 1.3.6.1.4.1.326.2.6.2.1.6
PROM software version of F-bus CPU for the first FDDI board.
OBJECT-TYPE    
  DisplayString  

alFcpuTwoPromVer 1.3.6.1.4.1.326.2.6.2.1.7
PROM software version of F-bus CPU for the second FDDI board.
OBJECT-TYPE    
  DisplayString  

alRcpuOneRtVer 1.3.6.1.4.1.326.2.6.2.1.8
Runtime software version of Ring CPU for the first FDDI board.
OBJECT-TYPE    
  DisplayString  

alRcpuTwoRtVer 1.3.6.1.4.1.326.2.6.2.1.9
Runtime software version of Ring CPU for the second FDDI board.
OBJECT-TYPE    
  DisplayString  

alRcpuOnePromVer 1.3.6.1.4.1.326.2.6.2.1.10
PROM software version of Ring CPU for the first FDDI board.
OBJECT-TYPE    
  DisplayString  

alRcpuTwoPromVer 1.3.6.1.4.1.326.2.6.2.1.11
PROM software version of Ring CPU for the second FDDI board.
OBJECT-TYPE    
  DisplayString  

alLastLoginFailureTimeDate 1.3.6.1.4.1.326.2.6.2.1.12
Time and date string of the last login session that failed.
OBJECT-TYPE    
  DisplayString  

alLastLoginFailureUserId 1.3.6.1.4.1.326.2.6.2.1.13
User id of the last login session that failed.
OBJECT-TYPE    
  DisplayString  

alLastLoginFailureReason 1.3.6.1.4.1.326.2.6.2.1.14
Reason code for the last login failure.
OBJECT-TYPE    
  INTEGER invalidLoginId(1), passwordMismatch(2)  

alLastLoginSourceAddress 1.3.6.1.4.1.326.2.6.2.1.15
Source address of the last login session that failed. The value would be either 'console' or ipaddress string of the telnet session.
OBJECT-TYPE    
  DisplayString  

alConsoleSyslogLevel 1.3.6.1.4.1.326.2.6.2.1.17
Level which generates a logging messsage for console port commands (telnet, tip, etc.); no messages if set to off(1).
OBJECT-TYPE    
  INTEGER off(1), logEmerg(2), logAlert(3), logCrit(4), logErr(5), logWarning(6), logNotice(7), logInfo(8), logDebug(9)  

alSnmpSyslogLevel 1.3.6.1.4.1.326.2.6.2.1.18
Level which generates a logging messsage for snmp induced changes; no messages if set to off(1).
OBJECT-TYPE    
  INTEGER off(1), logEmerg(2), logAlert(3), logCrit(4), logErr(5), logWarning(6), logNotice(7), logInfo(8), logDebug(9)  

alIlmiSyslogLevel 1.3.6.1.4.1.326.2.6.2.1.19
Level which generates a logging messsage for ilmi configuration changes; no messages if set to off(1).
OBJECT-TYPE    
  INTEGER off(1), logEmerg(2), logAlert(3), logCrit(4), logErr(5), logWarning(6), logNotice(7), logInfo(8), logDebug(9)  

alSyslogHostType 1.3.6.1.4.1.326.2.6.2.1.20
Host which receives syslog messages: notSet(1) if no host is set or becomes unset; local(2) if messages go to console; ip(3) if messages go to a remote host
OBJECT-TYPE    
  INTEGER notSet(1), local(2), ip(3)  

alSyslogHostIp 1.3.6.1.4.1.326.2.6.2.1.21
IP address of remote host which receives syslog messages; must be set if alSyslogHost is set to ip.
OBJECT-TYPE    
  DisplayString  

alSyslogHostIpFacility 1.3.6.1.4.1.326.2.6.2.1.22
Syslog facility to be assigned to all syslog messages. Default is daemon(1).
OBJECT-TYPE    
  INTEGER daemon(1), local0(2), local1(3), local2(4), local3(5), local4(6), local5(7), local6(8), local7(9)  

albridge 1.3.6.1.4.1.326.2.6.2.2
OBJECT IDENTIFIER    

alBridgeTable 1.3.6.1.4.1.326.2.6.2.2.1
A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame.
OBJECT-TYPE    
  SEQUENCE OF  
    AlBridgeEntry

alBridgeEntry 1.3.6.1.4.1.326.2.6.2.2.1.1
Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information.
OBJECT-TYPE    
  AlBridgeEntry  

alBridgeEntryAddress 1.3.6.1.4.1.326.2.6.2.2.1.1.1
The MAC address for which the bridge has forwarding and/or filtering information.
OBJECT-TYPE    
  MacAddress  

alBridgeEntryPort 1.3.6.1.4.1.326.2.6.2.2.1.1.2
The port number of the port on which a frame having a source address equal to the value of the corresponding instance of alBridgeEntryAddress has been seen.
OBJECT-TYPE    
  INTEGER  


alBridgeEntryRule 1.3.6.1.4.1.326.2.6.2.2.1.1.4
The rule number that is applied to packets that are forwarded to or from this address.
OBJECT-TYPE    
  INTEGER  

alBridgeEntryFlags 1.3.6.1.4.1.326.2.6.2.2.1.1.5
The status of this entry.
OBJECT-TYPE    
  INTEGER  

alBridgeTblClear 1.3.6.1.4.1.326.2.6.2.2.2
When set, clears the Bridge table.
OBJECT-TYPE    
  INTEGER  

alBrFlushCache 1.3.6.1.4.1.326.2.6.2.2.3
When set, flushes the cache.
OBJECT-TYPE    
  INTEGER  

alPortStatsTable 1.3.6.1.4.1.326.2.6.2.2.4
Per port statistics
OBJECT-TYPE    
  SEQUENCE OF  
    PortStatsEntry

portStatsEntry 1.3.6.1.4.1.326.2.6.2.2.4.1
Per port statistics entries.
OBJECT-TYPE    
  PortStatsEntry  

portStatsPort 1.3.6.1.4.1.326.2.6.2.2.4.1.1
Segment for which the statistics collected.
OBJECT-TYPE    
  INTEGER  

portStatsPktsIn 1.3.6.1.4.1.326.2.6.2.2.4.1.2
Good packets received on the segment. Packets are listed regardless of packet type, or whether the packet is forwarded to another segment. Error packets are not listed.
OBJECT-TYPE    
  Counter  

portStatsPktsOut 1.3.6.1.4.1.326.2.6.2.2.4.1.3
Packets transmitted on the segment. This statistic is incremented when a packet is scheduled for transmission, not when it is actually transmitted.
OBJECT-TYPE    
  Counter  

portStatsOctetsIn 1.3.6.1.4.1.326.2.6.2.2.4.1.4
Good octets received on the segment. This statistic includes 8 octets per packet to account for the preamble.
OBJECT-TYPE    
  Counter  

portStatsOctetsOut 1.3.6.1.4.1.326.2.6.2.2.4.1.5
Octets transmitted from the segment. This statistic is incremented when a packet is scheduled for transmission, not when it is actually transmitted. This statistic includes 8 octets per packet to account for the preamble.
OBJECT-TYPE    
  Counter  

portStatsMulticastPktsIn 1.3.6.1.4.1.326.2.6.2.2.4.1.6
Broadcast multicast packets received on the segment. This statistic is incremented for each good broadcast or multicast packet received on the segment.
OBJECT-TYPE    
  Counter  

portStatsMulticastPktsOut 1.3.6.1.4.1.326.2.6.2.2.4.1.7
Broadcast multicast packets transmitted from the segment. This statistic is incremented once for each broadcast or multicast packet scheduled for transmission on the segment.
OBJECT-TYPE    
  Counter  

portStatsTableMisses 1.3.6.1.4.1.326.2.6.2.2.4.1.8
Packets received that have unknown destination addresses. When address learning is enabled, this statistic is usually incremented only for the first packet transmitted to a workstation or other device connected to the segment. After a reply is received, the device's source address is added to the bridging table.
OBJECT-TYPE    
  Counter  

portStatsRcvBuffErrs 1.3.6.1.4.1.326.2.6.2.2.4.1.9
Incremented each time the hub detects an incoming packet but does not have a buffer in which to store the packet.
OBJECT-TYPE    
  Counter  

portStatsXmitBuffErrs 1.3.6.1.4.1.326.2.6.2.2.4.1.10
Incremented each time the hub attempts to forward a packet to a busy destination segment whose output buffers all are full.
OBJECT-TYPE    
  Counter  

portStatsTotalCollisions 1.3.6.1.4.1.326.2.6.2.2.4.1.11
The total number of collisions detected on the segment while attempting to transmit and receive packets. For FDDI segments, this statistic is always 0.
OBJECT-TYPE    
  Counter  

portStatsRcvCollisions 1.3.6.1.4.1.326.2.6.2.2.4.1.12
The number of collisions detected on the segment while listening for incoming packets. This statistic is only available for UTP segments. For segments on other module types, this statistic is always 0.
OBJECT-TYPE    
  Counter  

portStatsXmitCollisions 1.3.6.1.4.1.326.2.6.2.2.4.1.13
The number of collisions detected on the segment while attempting to transmit packets. For FDDI segments, this statistic is always 0.
OBJECT-TYPE    
  Counter  

portStatsXmitQLen 1.3.6.1.4.1.326.2.6.2.2.4.1.14
The number of outgoing packets in the transmit queue. These packets have been scheduled for transmission, but have not been transmitted yet.
OBJECT-TYPE    
  Counter  

portStatsPeakUtilization 1.3.6.1.4.1.326.2.6.2.2.4.1.15
The segment's maximum utilization during a one-second interval since the statistics last were cleared. For Ethernet segments, the current utilization is calculated as follows: Once per second, the current one- second utilization is computed as (total # octets) x (8 bits/octets) / 10 Mb/s. The peak utilization is then set to the maximum of the current one-second utilization and the previous peak utilization. NOTE: Total # octets is all octets transmitted and received on the segment during the previous second, including 8 octets of preamble per packet. The Ethernet rate is 10Mb.
OBJECT-TYPE    
  Counter  

portStatsCurrUtilization 1.3.6.1.4.1.326.2.6.2.2.4.1.16
For Ethernet segments, the current utilization is calculated as follows: Once per second, the current one-second utilization is computed as (total # octets) x (8 bits/octets) / 10 Mb/s. NOTE: Total # octets is all octets transmitted and received on the segment during the previous second, including 8 octets of preamble per packet. The Ethernet rate is 10Mb.
OBJECT-TYPE    
  Counter  

portStatsLossOfCarrier 1.3.6.1.4.1.326.2.6.2.2.4.1.17
Indicates that an AUI segment has no cable attached, or the cable or transceiver is faulty.
OBJECT-TYPE    
  Counter  

portStatsExcessRetries 1.3.6.1.4.1.326.2.6.2.2.4.1.18
Incremented whenever all of 15 attempts to transmit a single packet cause collisions. This can happen in very busy networks, or when no cable is attached to an enabled BNC port.
OBJECT-TYPE    
  Counter  

alBridgeStatsClear 1.3.6.1.4.1.326.2.6.2.2.5
When set, clears the statistics for the bridge. When not set, value 0 is returned.
OBJECT-TYPE    
  INTEGER  

alBridgePPControl 1.3.6.1.4.1.326.2.6.2.2.6
When set to 3 , disables the port to port collection of the stats; when set to 1, enables the port to port stats collection; when set to 2, clears the port to port stats.
OBJECT-TYPE    
  INTEGER enable(1), clear(2), disable(3)  

alPortToPortTable 1.3.6.1.4.1.326.2.6.2.2.7
Statistics for port to port traffic.
OBJECT-TYPE    
  SEQUENCE OF  
    PortToPortEntry

portToPortEntry 1.3.6.1.4.1.326.2.6.2.2.7.1
Statistics for port to port traffic
OBJECT-TYPE    
  PortToPortEntry  

alPPSourcePort 1.3.6.1.4.1.326.2.6.2.2.7.1.1
Source port number
OBJECT-TYPE    
  INTEGER  

alPPDestinationPort 1.3.6.1.4.1.326.2.6.2.2.7.1.2
Destination port number
OBJECT-TYPE    
  INTEGER  

portToPortPackets 1.3.6.1.4.1.326.2.6.2.2.7.1.3
Port to port packets.
OBJECT-TYPE    
  INTEGER  

portToPortOctets 1.3.6.1.4.1.326.2.6.2.2.7.1.4
Port to port octets.
OBJECT-TYPE    
  INTEGER  

alPortConfigTable 1.3.6.1.4.1.326.2.6.2.2.8
Per port configuration for configuring Source and Destination Rules etc.
OBJECT-TYPE    
  SEQUENCE OF  
    PortConfigEntry

portConfigEntry 1.3.6.1.4.1.326.2.6.2.2.8.1
Per port configuration.
OBJECT-TYPE    
  PortConfigEntry  

portConfigPort 1.3.6.1.4.1.326.2.6.2.2.8.1.1
The port number for this table entry
OBJECT-TYPE    
  INTEGER  

portConfigSrcRule 1.3.6.1.4.1.326.2.6.2.2.8.1.2
Source Rule for the port number identified by the instance of portConfigPort
OBJECT-TYPE    
  INTEGER  

portConfigDstRule 1.3.6.1.4.1.326.2.6.2.2.8.1.3
Destination Rule for the port number identified by the instance of portConfigPort
OBJECT-TYPE    
  INTEGER  

portConfigBlockLearnedEntries 1.3.6.1.4.1.326.2.6.2.2.8.1.4
When set to True (1), the port identified by the instance of portConfigPort will block the learned entries; if set to False (2) the port will not block the learned entries
OBJECT-TYPE    
  INTEGER true(1), false(2)  

alBridgeIpBridging 1.3.6.1.4.1.326.2.6.2.2.9
When set to enable(1), enables the IP bridging and if set to disable(2), disables the IP bridging.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alBrTemplateTable 1.3.6.1.4.1.326.2.6.2.2.10
Per template information
OBJECT-TYPE    
  SEQUENCE OF  
    BrTemplateEntry

brTemplateEntry 1.3.6.1.4.1.326.2.6.2.2.10.1
Template entry.
OBJECT-TYPE    
  BrTemplateEntry  

brTemplateNumber 1.3.6.1.4.1.326.2.6.2.2.10.1.1
The number of the template with which it is identified.
OBJECT-TYPE    
  INTEGER  

brTemplateOffset 1.3.6.1.4.1.326.2.6.2.2.10.1.2
A displacement, in octets, from the beginning of the packet. This must be a multiple of 4 in the range from 0 to 124 decimal. A value of -1 will delete the entry
OBJECT-TYPE    
  INTEGER  

brTemplateMask 1.3.6.1.4.1.326.2.6.2.2.10.1.3
A 4-byte (32-bit) number, normally specified as eight hexadecimal digits (00000000 - ffffffff) Description: The bytes in the mask are numbered from 0 to 3, starting with the high-order byte (big-endian format). Each byte of the mask is ANDed with the octet in the packet at displacement 'offset + i' to form a 4-byte 'masked value'.
OBJECT-TYPE    
  DisplayString  

brTemplateComparator 1.3.6.1.4.1.326.2.6.2.2.10.1.4
A 4-byte number, usually specified as eight hexadecimal digits (00000000 - ffffffff) Description: If the masked value defined above equals the comparator, then the template returns a value of 'true'; otherwise, it returns a value of 'false'.
OBJECT-TYPE    
  DisplayString  

brTemplateOption 1.3.6.1.4.1.326.2.6.2.2.10.1.5
Setting this value to 0 assume all 32 bits mask and comparator specified; value 1 assume half-word (2 bytes) qunatity; and value 2 assume single-byte quantity.
OBJECT-TYPE    
  INTEGER  

alBrRuleTable 1.3.6.1.4.1.326.2.6.2.2.11
Per rule information
OBJECT-TYPE    
  SEQUENCE OF  
    BrRuleEntry

brRuleEntry 1.3.6.1.4.1.326.2.6.2.2.11.1
Rule entry.
OBJECT-TYPE    
  BrRuleEntry  

brRuleNumber 1.3.6.1.4.1.326.2.6.2.2.11.1.1
A rule number in the range 101-162. You can define up to 62 rules.
OBJECT-TYPE    
  INTEGER  

brRuleStatement 1.3.6.1.4.1.326.2.6.2.2.11.1.2
Specifies the templates and the logical operators that make up the rule. Rule statements consist of rule numbers joined by the following logical operators: Operator Means... & AND | OR ~ NOT Rule statements are interpreted from left to right. Use parentheses to group expressions. You can use up to eight sets of parentheses to group template numbers and logical operators. The total maximum number of characters, including blanks, is 64.
OBJECT-TYPE    
  DisplayString  

alBrRuleToNodeTable 1.3.6.1.4.1.326.2.6.2.2.12
Rules to specific node.
OBJECT-TYPE    
  SEQUENCE OF  
    AlBrRuleToNodeEntry

alBrRuleToNodeEntry 1.3.6.1.4.1.326.2.6.2.2.12.1
Rule node entry.
OBJECT-TYPE    
  AlBrRuleToNodeEntry  

brRuleToNodePort 1.3.6.1.4.1.326.2.6.2.2.12.1.1
The number of the port for which this rule applies
OBJECT-TYPE    
  INTEGER  

brRuleToNodeMacAddr 1.3.6.1.4.1.326.2.6.2.2.12.1.2
The source MAC address
OBJECT-TYPE    
  PhysAddress  

brRuleToNodeRule 1.3.6.1.4.1.326.2.6.2.2.12.1.3
The rule number that applies to this entry.
OBJECT-TYPE    
  INTEGER  

alBrGroupTable 1.3.6.1.4.1.326.2.6.2.2.13
Bridge group table.
OBJECT-TYPE    
  SEQUENCE OF  
    AlBrGroupEntry

alBrGroupEntry 1.3.6.1.4.1.326.2.6.2.2.13.1
Bridge group entry.
OBJECT-TYPE    
  AlBrGroupEntry  

brGroupNumber 1.3.6.1.4.1.326.2.6.2.2.13.1.1
The group number by which the group is identified with.
OBJECT-TYPE    
  INTEGER  

brGroupPortsMask 1.3.6.1.4.1.326.2.6.2.2.13.1.2
The ports associated with the group number identified by the instance of brGroupNumber. The mask is ascii segments separated by commas. A value of -1 would invalidate the appropriate group.
OBJECT-TYPE    
  DisplayString  

brGroupName 1.3.6.1.4.1.326.2.6.2.2.13.1.3
The name of the group for which this entry applies
OBJECT-TYPE    
  DisplayString  

alBridgeSTPControl 1.3.6.1.4.1.326.2.6.2.2.14
When set to 2 , disables the spanning tree. set to 1, enables the spanning tree.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

alPortStateTable 1.3.6.1.4.1.326.2.6.2.2.15
Per port state information about spanning tree, dignostics and management.
OBJECT-TYPE    
  SEQUENCE OF  
    PortStateEntry

portStateEntry 1.3.6.1.4.1.326.2.6.2.2.15.1
Port state entry.
OBJECT-TYPE    
  PortStateEntry  

portStatePort 1.3.6.1.4.1.326.2.6.2.2.15.1.1
The port number for this table entry
OBJECT-TYPE    
  INTEGER  

portStateDiag 1.3.6.1.4.1.326.2.6.2.2.15.1.2
The diagnostics state of the port
OBJECT-TYPE    
  INTEGER good(1), bad(2), unknown(3)  

portStateMgmt 1.3.6.1.4.1.326.2.6.2.2.15.1.3
The management state of the port
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

portStateStp 1.3.6.1.4.1.326.2.6.2.2.15.1.4
The spanning tree state of the port.
OBJECT-TYPE    
  INTEGER  

portStatePortName 1.3.6.1.4.1.326.2.6.2.2.15.1.5
The name of this port
OBJECT-TYPE    
  DisplayString  

almgmt 1.3.6.1.4.1.326.2.6.2.3
OBJECT IDENTIFIER    

alAutoPortStateTable 1.3.6.1.4.1.326.2.6.2.3.1
auto port stat table
OBJECT-TYPE    
  SEQUENCE OF  
    AutoPortStateEntry

autoportStateEntry 1.3.6.1.4.1.326.2.6.2.3.1.1
auto port stat entry.
OBJECT-TYPE    
  AutoPortStateEntry  

autoPortStatePort 1.3.6.1.4.1.326.2.6.2.3.1.1.1
The port number for this table entry
OBJECT-TYPE    
  INTEGER  

autoPortState 1.3.6.1.4.1.326.2.6.2.3.1.1.2
Whether the auto port state detection is turned on or not.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

autoPortStateThreshold 1.3.6.1.4.1.326.2.6.2.3.1.1.3
Corresponding to the threshold parameter of the autoportstate command.
OBJECT-TYPE    
  INTEGER  

alLinkStatsCollect 1.3.6.1.4.1.326.2.6.2.3.2
When set to enable(1), per link stats collection is enabled; when set to disable(0), the per link stats are not collected.
OBJECT-TYPE    
  INTEGER  

alLinkStatsClear 1.3.6.1.4.1.326.2.6.2.3.3
When set, clears the link stats; otherwise value 0 is returned.
OBJECT-TYPE    
  INTEGER  

alLinkStatsTable 1.3.6.1.4.1.326.2.6.2.3.4
Per link stats table
OBJECT-TYPE    
  SEQUENCE OF  
    LinkStatsEntry

linkStatsEntry 1.3.6.1.4.1.326.2.6.2.3.4.1
link stats entry.
OBJECT-TYPE    
  LinkStatsEntry  

linkStatsPort 1.3.6.1.4.1.326.2.6.2.3.4.1.1
Port Number
OBJECT-TYPE    
  INTEGER  


linkStatsPktsIn 1.3.6.1.4.1.326.2.6.2.3.4.1.3
Pkts In - corresponds to pi
OBJECT-TYPE    
  Counter  

linkStatsOctetsIn 1.3.6.1.4.1.326.2.6.2.3.4.1.4
Octets In - corresponds to oi
OBJECT-TYPE    
  Counter  

linkStatsBMCastPktsIn 1.3.6.1.4.1.326.2.6.2.3.4.1.5
Bmcast Pks In - corresponds to bpi
OBJECT-TYPE    
  Counter  

linkStatsGiantPkts 1.3.6.1.4.1.326.2.6.2.3.4.1.6
Giant Pkts - corresponds to gp
OBJECT-TYPE    
  Counter  

linkStatsFrameErrs 1.3.6.1.4.1.326.2.6.2.3.4.1.7
Frame Errors - corresponds to fa
OBJECT-TYPE    
  Counter  

linkStatsFCSErrs 1.3.6.1.4.1.326.2.6.2.3.4.1.8
FCS Errors corresponds to fcs
OBJECT-TYPE    
  Counter  

linkStatsCodingErrors 1.3.6.1.4.1.326.2.6.2.3.4.1.9
This Counter is incremented when the receiver (RX) port detects an invalid symbol in the incoming code sent by the TX port using symbol mode.
OBJECT-TYPE    
  Counter  

linkStatsDataRateMismatch 1.3.6.1.4.1.326.2.6.2.3.4.1.10
This counter is incremented by one for each frame received on this port that meets all of the following conditions: 1) The Collision Event signal is not asserted 2) The Activity duration is greater than ValidPacketMinTime 3) The frequency (data rate) is detectably mismatched from the local transmit frequency
OBJECT-TYPE    
  Counter  

linkStatsJabbers 1.3.6.1.4.1.326.2.6.2.3.4.1.11
This Counter is incremented for each CarrierEvent on this port whose ActivityDuration is greater than the MAU Jabber Lockup Protection timer
OBJECT-TYPE    
  Counter  

linkStatsShortEvents 1.3.6.1.4.1.326.2.6.2.3.4.1.12
This counter is incremented for each CarrierEvent on this port with ActivityDuration less than ShortEventMaxTime.
OBJECT-TYPE    
  Counter  

linkStatsRunts 1.3.6.1.4.1.326.2.6.2.3.4.1.13
An event whose length is greater than 74 bit times but less than 82 bit times shall increment either the shortEvents counter or the runts counter but not both
OBJECT-TYPE    
  Counter  

linkStatsPortCollision 1.3.6.1.4.1.326.2.6.2.3.4.1.14
This counter is incremented for any CarrierEvent signal on any port for which the CollisionEvent signal on this port is also asserted.
OBJECT-TYPE    
  Counter  

linkStatsLateCollision 1.3.6.1.4.1.326.2.6.2.3.4.1.15
This counter is incremented for each CarrierEvent on this port in which the CollIn(X) variable transitions to the value SQE while the ActivityDuration is greater than the LAteEventThreshold.
OBJECT-TYPE    
  Counter  

linkStatsAutoPartition 1.3.6.1.4.1.326.2.6.2.3.4.1.16
This counter is incremented each time the repeater has automatically partitioned this port
OBJECT-TYPE    
  Counter  

linkStatsIsolates 1.3.6.1.4.1.326.2.6.2.3.4.1.17
This counter is incremented whenever the port detects two consecutive carrier integrity false carriers.
OBJECT-TYPE    
  Counter  

linkStatsSaFieldChanges 1.3.6.1.4.1.326.2.6.2.3.4.1.18
This counter is incremented for each time that the rptrAddrTrackLastSourceAddress attribute for this port has changed.
OBJECT-TYPE    
  Counter  

linkStatsLastSa 1.3.6.1.4.1.326.2.6.2.3.4.1.19
This object is the SourceAddress of the last readable frame received by this port.
OBJECT-TYPE    
  MacAddress  

alLinkControlTable 1.3.6.1.4.1.326.2.6.2.3.5
Per link stats table
OBJECT-TYPE    
  SEQUENCE OF  
    LinkControlEntry

linkControlEntry 1.3.6.1.4.1.326.2.6.2.3.5.1
link control entry.
OBJECT-TYPE    
  LinkControlEntry  

linkControlPort 1.3.6.1.4.1.326.2.6.2.3.5.1.1
Port number for this entry.
OBJECT-TYPE    
  INTEGER  


linkControlEnlState 1.3.6.1.4.1.326.2.6.2.3.5.1.3
Setting the value of this object to Enable (1) will enable the link and setting to Disable(2) will disable the link.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

linkControlLinkTest 1.3.6.1.4.1.326.2.6.2.3.5.1.4
Link test status for the link; corresponds to lt option of the lkd command.
OBJECT-TYPE    
  INTEGER  

linkControlPartition 1.3.6.1.4.1.326.2.6.2.3.5.1.5
Partitioning state of the link
OBJECT-TYPE    
  INTEGER  

linkControlPolarity 1.3.6.1.4.1.326.2.6.2.3.5.1.6
Polarity of the link
OBJECT-TYPE    
  INTEGER  

alPortLinkTable 1.3.6.1.4.1.326.2.6.2.3.6
Per port link type
OBJECT-TYPE    
  SEQUENCE OF  
    PortLinkEntry

portLinkEntry 1.3.6.1.4.1.326.2.6.2.3.6.1
port link entry.
OBJECT-TYPE    
  PortLinkEntry  

portLinkPort 1.3.6.1.4.1.326.2.6.2.3.6.1.1
The port number for which the port type is to be set
OBJECT-TYPE    
  INTEGER  

portLinkType 1.3.6.1.4.1.326.2.6.2.3.6.1.2
The type of port
OBJECT-TYPE    
  INTEGER aui(1), bnc(2), bnct(3), utp(4), fiber(5), unknown(6)  

alFiberStatsTable 1.3.6.1.4.1.326.2.6.2.3.7
Per port fiber stats and Fiber Security
OBJECT-TYPE    
  SEQUENCE OF  
    FiberStatsEntry

fiberStatsEntry 1.3.6.1.4.1.326.2.6.2.3.7.1
fiber stat entry.
OBJECT-TYPE    
  FiberStatsEntry  

fiberStatsPort 1.3.6.1.4.1.326.2.6.2.3.7.1.1
The fiber port for which the stats are requested or the Fiber violation is set
OBJECT-TYPE    
  INTEGER  

fiberAuiStatus 1.3.6.1.4.1.326.2.6.2.3.7.1.2
The fiber aui status for the port that is specified by the instance of fiberStatsPort
OBJECT-TYPE    
  INTEGER  

fiberSecurityViolation 1.3.6.1.4.1.326.2.6.2.3.7.1.3
The fiber port for which the stats are requested or the Fiber violation is set
OBJECT-TYPE    
  INTEGER detect(1), ignore(2), clear(3)  

alPortMonitorClose 1.3.6.1.4.1.326.2.6.2.3.8
Setting the value to close(1), will turn the port monitoring off.
OBJECT-TYPE    
  INTEGER  

alPortMonitorTable 1.3.6.1.4.1.326.2.6.2.3.9
port monitor table.
OBJECT-TYPE    
  SEQUENCE OF  
    PortMonitorEntry

portMonitorEntry 1.3.6.1.4.1.326.2.6.2.3.9.1
port monitor entry.
OBJECT-TYPE    
  PortMonitorEntry  

portMonSrcPort 1.3.6.1.4.1.326.2.6.2.3.9.1.1
The traffic to/from this port will be monitored on the portMonDstPort
OBJECT-TYPE    
  INTEGER  

portMonDstPort 1.3.6.1.4.1.326.2.6.2.3.9.1.2
The traffic to/from portMonSrcPort will be monitored on this port
OBJECT-TYPE    
  INTEGER  

portMonTrafficType 1.3.6.1.4.1.326.2.6.2.3.9.1.3
Setting this value to 1, will let the port monitor monitor forwarded traffic; setting to 8 means the forwarded traffic will not be monitored.
OBJECT-TYPE    
  INTEGER forwarded(1), incoming(2), forwardedandincoming(3), generated(4), forwardedandgenerated(5), incomingandgenerated(6), all(7), stopmonitoring(8)  

alReboot 1.3.6.1.4.1.326.2.6.2.3.10
Setting the value to Reboot(1), will reboot the PowerHub.
OBJECT-TYPE    
  INTEGER  

alPortMonitorViewTable 1.3.6.1.4.1.326.2.6.2.3.11
port monitor view table.
OBJECT-TYPE    
  SEQUENCE OF  
    PortMonitorViewEntry

portMonitorViewEntry 1.3.6.1.4.1.326.2.6.2.3.11.1
port monitor view entry.
OBJECT-TYPE    
  PortMonitorViewEntry  

portMonViewSrcPort 1.3.6.1.4.1.326.2.6.2.3.11.1.1
The traffic from this port to the port designated by portMonViewDstPort will be monitored on portMonViewMonitorPort.
OBJECT-TYPE    
  INTEGER  

portMonViewDstPort 1.3.6.1.4.1.326.2.6.2.3.11.1.2
The traffic to this port from the port designated by portMonViewSrcPort will be monitored on portMonViewMonitorPort.
OBJECT-TYPE    
  INTEGER  

portMonViewMonitorPort 1.3.6.1.4.1.326.2.6.2.3.11.1.3
The traffic to portMonViewDstPort from the port designated by portMonViewSrcPort will be monitored on portMonViewMonitorPort. The mask is ascii, segments separated by commas.
OBJECT-TYPE    
  DisplayString  

alCfgLocalMediaScope 1.3.6.1.4.1.326.2.6.2.3.12
This object display the types of local media currently available on the PH for storing files. The PH4000 and PH6000 do not support floppy whereas the PH3000 and PH5000 do not support flash. The flash is optional on PH6000 & PH7000. All models do support tftpHost save options. Depending on the value of this object, the user can specify the appropriate filename and the media type in other objects for doing the save operation.
OBJECT-TYPE    
  INTEGER floppy(1), flash(2), floppyAndFlash(3), none(4)  

alCfgMediaName 1.3.6.1.4.1.326.2.6.2.3.13
This object specify the medium name to which the the powerhub will save the configurations. The value 'none' is returned when user have not set the valid save medium. Save operation cannot be performed when value is set to 'none'.
OBJECT-TYPE    
  INTEGER floppy(1), flash(2), tftpHost(3), none(4)  

alCfgTftpHostAddr 1.3.6.1.4.1.326.2.6.2.3.14
This object specify the IP address of the tftp host system to which the configs get saved when the object alCfgMediaName is set with value tftpHost(3).
OBJECT-TYPE    
  IpAddress  

alCfgFileName 1.3.6.1.4.1.326.2.6.2.3.15
This object specify the configuration filename to which the PH will save the configuration. Depending on the medium (floppy, flash, or tftpHost) in which the saving will be done, the filename have to be set correctly. For example, the filename for floppy and flash medium cannot exceed 8 characters. The filnames can be appended with the optional dot character followed by 3 character extension. The filenames for tftp host should have been pre-created on the host and it should be writable by the PH. All tftp file access restrictions apply.
OBJECT-TYPE    
  DisplayString  

alCfgSaveOp 1.3.6.1.4.1.326.2.6.2.3.16
Save config operation can be performed only when this object is set to value '1'. This field returns a dummy value 100 for get operations.
OBJECT-TYPE    
  INTEGER  

Defined Objects

MacAddress  
OCTET STRING SIZE(6)    

AlSlotEntry  
SEQUENCE    
  INTEGER as alSlotNumber  
  INTEGER as alSlotCardType  
  INTEGER as alSlotStatus  
  DisplayString as alSlotModel  
  DisplayString as alSlotRevision  
  DisplayString as alSlotIssue  
  DisplayString as alSlotDeviation  
  DisplayString as alSlotSerialNumber  
  INTEGER as alSlotPower5  
  INTEGER as alSlotPower12  
  INTEGER as alSlotPower33  
  INTEGER as alSlotPowerOther  

AlVportEntry  
SEQUENCE    
  INTEGER as alVportNumber  
  INTEGER as alVportSlotNumber  
  INTEGER as alVportPortNumber  
  INTEGER as alVportPortType  
  INTEGER as alVportStatus  
  INTEGER as alVportControllerType  
  INTEGER as alVportDataRateConfig  
  INTEGER as alVportOperModeConfig  
  INTEGER as alVportAutoNegotiateConfig  
  INTEGER as alVportDataRateStatus  
  INTEGER as alVportOperModeStatus  

AlSlotVportEntry  
SEQUENCE    
  INTEGER as alSlotVportSlotNumber  
  INTEGER as alSlotVportPortNumber  
  INTEGER as alSlotVportNumber  
  INTEGER as alSlotVportPortType  
  INTEGER as alSlotVportStatus  
  INTEGER as alSlotVportControllerType  
  INTEGER as alSlotVportDataRateConfig  
  INTEGER as alSlotVportOperModeConfig  
  INTEGER as alSlotVportAutoNegotiateConfig  
  INTEGER as alSlotVportDataRateStatus  
  INTEGER as alSlotVportOperModeStatus  

AlPSEntry  
SEQUENCE    
  INTEGER as alPSNumber  
  INTEGER as alPSStatus  

AlBridgeEntry  
SEQUENCE    
  MacAddress as alBridgeEntryAddress  
  INTEGER as alBridgeEntryPort  
  INTEGER as alBridgeEntryLink  
  INTEGER as alBridgeEntryRule  
  INTEGER as alBridgeEntryFlags  

PortStatsEntry  
SEQUENCE    
  INTEGER as portStatsPort  
  Counter as portStatsPktsIn  
  Counter as portStatsPktsOut  
  Counter as portStatsOctetsIn  
  Counter as portStatsOctetsOut  
  Counter as portStatsMulticastPktsIn  
  Counter as portStatsMulticastPktsOut  
  Counter as portStatsTableMisses  
  Counter as portStatsRcvBuffErrs  
  Counter as portStatsXmitBuffErrs  
  Counter as portStatsTotalCollisions  
  Counter as portStatsRcvCollisions  
  Counter as portStatsXmitCollisions  
  Counter as portStatsXmitQLen  
  Counter as portStatsPeakUtilization  
  Counter as portStatsCurrUtilization  
  Counter as portStatsLossOfCarrier  
  Counter as portStatsExcessRetries  

PortToPortEntry  
SEQUENCE    
  INTEGER as alPPSourcePort  
  INTEGER as alPPDestinationPort  
  INTEGER as portToPortPackets  
  INTEGER as portToPortOctets  

PortConfigEntry  
SEQUENCE    
  INTEGER as portConfigPort  
  INTEGER as portConfigSrcRule  
  INTEGER as portConfigDstRule  
  INTEGER as portConfigBlockLearnedEntries  

BrTemplateEntry  
SEQUENCE    
  INTEGER as brTemplateNumber  
  INTEGER as brTemplateOffset  
  DisplayString as brTemplateMask  
  DisplayString as brTemplateComparator  
  INTEGER as brTemplateOption  

BrRuleEntry  
SEQUENCE    
  INTEGER as brRuleNumber  
  DisplayString as brRuleStatement  

AlBrRuleToNodeEntry  
SEQUENCE    
  INTEGER as brRuleToNodePort  
  PhysAddress as brRuleToNodeMacAddr  
  INTEGER as brRuleToNodeRule  

AlBrGroupEntry  
SEQUENCE    
  INTEGER as brGroupNumber  
  DisplayString as brGroupPortsMask  
  DisplayString as brGroupName  

PortStateEntry  
SEQUENCE    
  INTEGER as portStatePort  
  INTEGER as portStateDiag  
  INTEGER as portStateMgmt  
  INTEGER as portStateStp  
  DisplayString as portStatePortName  

AutoPortStateEntry  
SEQUENCE    
  INTEGER as autoPortStatePort  
  INTEGER as autoPortState  
  INTEGER as autoPortStateThreshold  

LinkStatsEntry  
SEQUENCE    
  INTEGER as linkStatsPort  
  Counter as linkStatsLink  
  Counter as linkStatsPktsIn  
  Counter as linkStatsOctetsIn  
  Counter as linkStatsBMCastPktsIn  
  Counter as linkStatsGiantPkts  
  Counter as linkStatsFrameErrs  
  Counter as linkStatsFCSErrs  
  Counter as linkStatsCodingErrors  
  Counter as linkStatsDataRateMismatch  
  Counter as linkStatsJabbers  
  Counter as linkStatsShortEvents  
  Counter as linkStatsRunts  
  Counter as linkStatsPortCollision  
  Counter as linkStatsLateCollision  
  Counter as linkStatsAutoPartition  
  Counter as linkStatsIsolates  
  Counter as linkStatsSaFieldChanges  
  MacAddress as linkStatsLastSa  

LinkControlEntry  
SEQUENCE    
  INTEGER as linkControlPort  
  INTEGER as linkControlLink  
  INTEGER as linkControlEnlState  
  INTEGER as linkControlLinkTest  
  INTEGER as linkControlPartition  
  INTEGER as linkControlPolarity  

PortLinkEntry  
SEQUENCE    
  INTEGER as portLinkPort  
  INTEGER as portLinkType  

FiberStatsEntry  
SEQUENCE    
  INTEGER as fiberStatsPort  
  INTEGER as fiberAuiStatus  
  INTEGER as fiberSecurityViolation  

PortMonitorEntry  
SEQUENCE    
  INTEGER as portMonSrcPort  
  INTEGER as portMonDstPort  
  INTEGER as portMonTrafficType  

PortMonitorViewEntry  
SEQUENCE    
  INTEGER as portMonViewSrcPort  
  INTEGER as portMonViewDstPort  
  DisplayString as portMonViewMonitorPort