POWERHUB-TCPIP-MIB

File: POWERHUB-TCPIP-MIB.mib (55016 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB

Imported symbols

enterprises OBJECT-TYPE NetworkAddress
IpAddress Counter Gauge
TimeTicks DisplayString PhysAddress

Defined Objects

fore 1.3.6.1.4.1.326
OBJECT IDENTIFIER    

systems 1.3.6.1.4.1.326.2
OBJECT IDENTIFIER    

lsd 1.3.6.1.4.1.326.2.6
OBJECT IDENTIFIER    

lsdproducts 1.3.6.1.4.1.326.2.6.1
OBJECT IDENTIFIER    

lsdcommon 1.3.6.1.4.1.326.2.6.2
OBJECT IDENTIFIER    

alrip 1.3.6.1.4.1.326.2.6.2.4
OBJECT IDENTIFIER    

alripControlType 1.3.6.1.4.1.326.2.6.2.4.1
control type to change the RIP update mechanism
OBJECT-TYPE    
  INTEGER normal(1), vlan(2)  

alRipNormalConfigTable 1.3.6.1.4.1.326.2.6.2.4.2
Per port RIP configuration per segment method.
OBJECT-TYPE    
  SEQUENCE OF  
    AlripNormalConfigEntry

alripNormalConfigEntry 1.3.6.1.4.1.326.2.6.2.4.2.1
information about a specific RIP configuration entry
OBJECT-TYPE    
  AlripNormalConfigEntry  

alripNormalConfigPort 1.3.6.1.4.1.326.2.6.2.4.2.1.1
Port number for which the RIP parameters are to be set or viewed.
OBJECT-TYPE    
  INTEGER  

alripNormalConfigTalk 1.3.6.1.4.1.326.2.6.2.4.2.1.2
Controls whether the hub generates RIP packets on the port identified by the instance of ripConfigPort.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alripNormalConfigListen 1.3.6.1.4.1.326.2.6.2.4.2.1.3
Controls whether the hub processes RIP packets received on the port identified by the instance of ripConfigPort.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alripNormalConfigPoison 1.3.6.1.4.1.326.2.6.2.4.2.1.4
Controls what happens when a route goes down. If set to no(2), the hub simply stops reporting the route. If set to yes(1), the hub reports it one more time, but with a metric value of 16, which infinity as far as RIP is concerned. Thus other routers learn immediately that the route is down.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alripNormalConfigRptStaticRt 1.3.6.1.4.1.326.2.6.2.4.2.1.5
When RIP packets are generated on the port, controls whether the hub reports the static routes in its route table.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alripNormalConfigRptDefaultRt 1.3.6.1.4.1.326.2.6.2.4.2.1.6
When RIP packets are generated on the port, controls whether the hub reports the default routes, if any, in ints route table.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alripNormalConfigAccptDefaultRt 1.3.6.1.4.1.326.2.6.2.4.2.1.7
When RIP packets are received on the port, controls whether the hub accepts(learns) a default route that is reported in a RIP packet.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alRipVLANConfigTable 1.3.6.1.4.1.326.2.6.2.4.3
Per port RIP configuration per VLAN method.
OBJECT-TYPE    
  SEQUENCE OF  
    AlripVLANConfigEntry

alripVLANConfigEntry 1.3.6.1.4.1.326.2.6.2.4.3.1
information about a specific RIP configuration entry
OBJECT-TYPE    
  AlripVLANConfigEntry  

alripVLANConfigNetNumber 1.3.6.1.4.1.326.2.6.2.4.3.1.1
IP network number for which the RIP parameters are to be set or viewed.
OBJECT-TYPE    
  IpAddress  

alripVLANConfigTalk 1.3.6.1.4.1.326.2.6.2.4.3.1.2
Controls whether the hub generates RIP packets on the port identified by the instance of ripConfigPort.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alripVLANConfigListen 1.3.6.1.4.1.326.2.6.2.4.3.1.3
Controls whether the hub processes RIP packets received on the port identified by the instance of ripConfigPort. This field cannot be activated if this interface is controlled by OSPF
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alripVLANConfigPoison 1.3.6.1.4.1.326.2.6.2.4.3.1.4
Controls what happens when a route goes down. If set to no(2), the hub simply stops reporting the route. If set to yes(1), the hub reports it one more time, but with a metric value of 16, which infinity as far as RIP is concerned. Thus other routers learn immediately that the route is down.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alripVLANConfigRptStaticRt 1.3.6.1.4.1.326.2.6.2.4.3.1.5
When RIP packets are generated on the port, controls whether the hub reports the static routes in its route table.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alripVLANConfigRptDefaultRt 1.3.6.1.4.1.326.2.6.2.4.3.1.6
When RIP packets are generated on the port, controls whether the hub reports the default routes, if any, in ints route table.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alripVLANConfigAccptDefaultRt 1.3.6.1.4.1.326.2.6.2.4.3.1.7
When RIP packets are received on the port, controls whether the hub accepts(learns) a default
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

alripVLANConfigDelete 1.3.6.1.4.1.326.2.6.2.4.3.1.8
When set to 1, this entry is deleted.
OBJECT-TYPE    
  INTEGER  

alripStatsClear 1.3.6.1.4.1.326.2.6.2.4.4
When set to 1, clears the RIP stats
OBJECT-TYPE    
  INTEGER  

alRipStatPktsRcvd 1.3.6.1.4.1.326.2.6.2.4.5
Packets Received.
OBJECT-TYPE    
  Counter  

alRipStatPktsXmitted 1.3.6.1.4.1.326.2.6.2.4.6
Packets Sent.
OBJECT-TYPE    
  Counter  

alRipStatReqsRcvd 1.3.6.1.4.1.326.2.6.2.4.7
Requests Received.
OBJECT-TYPE    
  Counter  

alRipStatRespRcvd 1.3.6.1.4.1.326.2.6.2.4.8
Responses Received.
OBJECT-TYPE    
  Counter  

alRipStatReqsXmitted 1.3.6.1.4.1.326.2.6.2.4.9
Requests Sent.
OBJECT-TYPE    
  Counter  

alRipStatRespXmitted 1.3.6.1.4.1.326.2.6.2.4.10
Responses Sent.
OBJECT-TYPE    
  Counter  

alRipStatRouteTimeOuts 1.3.6.1.4.1.326.2.6.2.4.11
Route Timeouts.
OBJECT-TYPE    
  Counter  

alRipStatShortPkts 1.3.6.1.4.1.326.2.6.2.4.12
Short packets received.
OBJECT-TYPE    
  Counter  

alRipStatBadVer 1.3.6.1.4.1.326.2.6.2.4.13
Bad version pkts received.
OBJECT-TYPE    
  Counter  

alRipStatBadZeroes 1.3.6.1.4.1.326.2.6.2.4.14
Bad zeroes received.
OBJECT-TYPE    
  Counter  

alRipStatBadSrcPort 1.3.6.1.4.1.326.2.6.2.4.15
Packets with bad Source port received.
OBJECT-TYPE    
  Counter  

alRipStatBadSrcIp 1.3.6.1.4.1.326.2.6.2.4.16
Packets with bad source IP address received.
OBJECT-TYPE    
  Counter  

alRipStatPktsSelf 1.3.6.1.4.1.326.2.6.2.4.17
Packets from self received.
OBJECT-TYPE    
  Counter  

alRipigUpdates 1.3.6.1.4.1.326.2.6.2.4.18
number of RIP update trigged.
OBJECT-TYPE    
  Counter  

alRipStatPqueuePktsQueued 1.3.6.1.4.1.326.2.6.2.4.19
Packets queued in RIP process queue.
OBJECT-TYPE    
  Counter  

alRipStatPqueueFreeQueue 1.3.6.1.4.1.326.2.6.2.4.20
Free entries in the RIP processing queue.
OBJECT-TYPE    
  Counter  

alRipStatTqueuePktsQueued 1.3.6.1.4.1.326.2.6.2.4.21
Packets queued in the RIP route timeout process queue.
OBJECT-TYPE    
  Counter  

alRipStatTqueueFreeQueue 1.3.6.1.4.1.326.2.6.2.4.22
Free entries in the RIP route timeout queue.
OBJECT-TYPE    
  Counter  

alRipDynPktsRcvd 1.3.6.1.4.1.326.2.6.2.4.23
Packets Received.
OBJECT-TYPE    
  Counter  

alRipDynPktsXmitted 1.3.6.1.4.1.326.2.6.2.4.24
Packets Sent.
OBJECT-TYPE    
  Counter  

alRipDynReqsRcvd 1.3.6.1.4.1.326.2.6.2.4.25
Requests Received.
OBJECT-TYPE    
  Counter  

alRipDynRespRcvd 1.3.6.1.4.1.326.2.6.2.4.26
Responses Received.
OBJECT-TYPE    
  Counter  

alRipDynReqsXmitted 1.3.6.1.4.1.326.2.6.2.4.27
Requests Sent.
OBJECT-TYPE    
  Counter  

alRipDynRespXmitted 1.3.6.1.4.1.326.2.6.2.4.28
Responses Sent.
OBJECT-TYPE    
  Counter  

alRipDynRouteTimeOuts 1.3.6.1.4.1.326.2.6.2.4.29
Route Timeouts.
OBJECT-TYPE    
  Counter  

alRipDynShortPkts 1.3.6.1.4.1.326.2.6.2.4.30
Short packets received.
OBJECT-TYPE    
  Counter  

alRipDynBadVer 1.3.6.1.4.1.326.2.6.2.4.31
Bad version pkts received.
OBJECT-TYPE    
  Counter  

alRipDynBadZeroes 1.3.6.1.4.1.326.2.6.2.4.32
Bad zeroes received.
OBJECT-TYPE    
  Counter  

alRipDynBadSrcPort 1.3.6.1.4.1.326.2.6.2.4.33
Packets with bad Source port received.
OBJECT-TYPE    
  Counter  

alRipDynBadSrcIp 1.3.6.1.4.1.326.2.6.2.4.34
Packets with bad source IP address received.
OBJECT-TYPE    
  Counter  

alRipDynPktsSelf 1.3.6.1.4.1.326.2.6.2.4.35
Packets from self received.
OBJECT-TYPE    
  Counter  

alRipDynNumTrigUpdates 1.3.6.1.4.1.326.2.6.2.4.36
number of RIP update trigged.
OBJECT-TYPE    
  Counter  

alRipDyntPqueuePktsQueued 1.3.6.1.4.1.326.2.6.2.4.37
Packets queued in RIP process queue.
OBJECT-TYPE    
  Counter  

alRipDynPqueueFreeQueue 1.3.6.1.4.1.326.2.6.2.4.38
Free entries in the RIP processing queue.
OBJECT-TYPE    
  Counter  

alRipDynTqueuePktsQueued 1.3.6.1.4.1.326.2.6.2.4.39
Packets queued in the RIP route timeout process queue.
OBJECT-TYPE    
  Counter  

alRipDynTqueueFreeQueue 1.3.6.1.4.1.326.2.6.2.4.40
Free entries in the RIP route timeout queue.
OBJECT-TYPE    
  Counter  

alRipAccptFilTable 1.3.6.1.4.1.326.2.6.2.4.41
RIP Accept filter table
OBJECT-TYPE    
  SEQUENCE OF  
    RipAccptFilEntry

ripAccptFilEntry 1.3.6.1.4.1.326.2.6.2.4.41.1
RIP Accept filter entry
OBJECT-TYPE    
  RipAccptFilEntry  

ripAccptFilNumber 1.3.6.1.4.1.326.2.6.2.4.41.1.1
Filter Number; Range 1-64
OBJECT-TYPE    
  INTEGER 1..64  

ripAccptFilAddr 1.3.6.1.4.1.326.2.6.2.4.41.1.2
Valid network or subnet address
OBJECT-TYPE    
  IpAddress  

ripAccptFilMask 1.3.6.1.4.1.326.2.6.2.4.41.1.3
Accept filter Mask
OBJECT-TYPE    
  IpAddress  

ripAccptFilPort 1.3.6.1.4.1.326.2.6.2.4.41.1.4
Port number on which network should be accepted or not. Range 1-14.
OBJECT-TYPE    
  INTEGER 1..14  

alRipReportFilTable 1.3.6.1.4.1.326.2.6.2.4.42
RIP Report filter table
OBJECT-TYPE    
  SEQUENCE OF  
    RipReportFilEntry

ripReportFilEntry 1.3.6.1.4.1.326.2.6.2.4.42.1
RIP Report filter entry
OBJECT-TYPE    
  RipReportFilEntry  

ripReportFilNumber 1.3.6.1.4.1.326.2.6.2.4.42.1.1
Filter Number; Range 1-64
OBJECT-TYPE    
  INTEGER 1..64  

ripReportFilAddr 1.3.6.1.4.1.326.2.6.2.4.42.1.2
Valid network or subnet address
OBJECT-TYPE    
  IpAddress  

ripReportFilMask 1.3.6.1.4.1.326.2.6.2.4.42.1.3
Report filter Mask
OBJECT-TYPE    
  IpAddress  

ripReportFilPort 1.3.6.1.4.1.326.2.6.2.4.42.1.4
Port number on which network should be reported or not. Port number range 1-14
OBJECT-TYPE    
  INTEGER 1..14  

altcp 1.3.6.1.4.1.326.2.6.2.5
OBJECT IDENTIFIER    

alTcpConnIdleTime 1.3.6.1.4.1.326.2.6.2.5.1
Time in minutes before sending keep-alives. The range is 5 to 30 minutes.
OBJECT-TYPE    
  INTEGER  

alTcpKeepAliveInt 1.3.6.1.4.1.326.2.6.2.5.2
Time interval in seconds between two successive keep-alive sends. The range is 30 to 240 seconds.
OBJECT-TYPE    
  INTEGER  

alTcpDisconnectInt 1.3.6.1.4.1.326.2.6.2.5.3
Time interval in seconds, before an idle connection is dropped. This equals to the sum of alTcpConnIdleTime plus eight times the alTcpKeepAliveInt interval.
OBJECT-TYPE    
  INTEGER  

alTcpShortSegRcvd 1.3.6.1.4.1.326.2.6.2.5.4
Number of short segments received.
OBJECT-TYPE    
  INTEGER  

alTcpStatsClear 1.3.6.1.4.1.326.2.6.2.5.5
When set to 1, clears the TCP stats.
OBJECT-TYPE    
  INTEGER  

alTcpConnTable 1.3.6.1.4.1.326.2.6.2.5.6
A table containing TCP connection-specific information.
OBJECT-TYPE    
  SEQUENCE OF  
    AlTcpConnEntry

alTcpConnEntry 1.3.6.1.4.1.326.2.6.2.5.6.1
Information about a particular current TCP connection. An object of this type is transient, in that it ceases to exist when (or soon after) the connection makes the transition to the CLOSED state.
OBJECT-TYPE    
  AlTcpConnEntry  

alTcpConnId 1.3.6.1.4.1.326.2.6.2.5.6.1.1
The connection Identifier by which a connection is addressed.
OBJECT-TYPE    
  INTEGER  

alTcpConnState 1.3.6.1.4.1.326.2.6.2.5.6.1.2
The state of this TCP connection. The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to set this object to any other value. If a management station sets this object to the value deleteTCB(12), then this has the effect of deleting the TCB (as defined in RFC 793) of the corresponding connection on the managed node, resulting in immediate termination of the connection.
OBJECT-TYPE    
  INTEGER closed(1), listen(2), synSent(3), synReceived(4), established(5), finWait1(6), finWait2(7), closeWait(8), lastAck(9), closing(10), timeWait(11), deleteTCB(12)  

alTcpConnLocalAddress 1.3.6.1.4.1.326.2.6.2.5.6.1.3
The local IP address for this TCP connection. In the case of a connection in the listen state which is willing to accept connections for any IP interface associated with the node, the value 0.0.0.0 is used.
OBJECT-TYPE    
  IpAddress  

alTcpConnLocalPort 1.3.6.1.4.1.326.2.6.2.5.6.1.4
The local port number for this TCP connection.
OBJECT-TYPE    
  INTEGER  

alTcpConnRemAddress 1.3.6.1.4.1.326.2.6.2.5.6.1.5
The remote IP address for this TCP connection.
OBJECT-TYPE    
  IpAddress  

alTcpConnRemPort 1.3.6.1.4.1.326.2.6.2.5.6.1.6
The remote port number for this TCP connection.
OBJECT-TYPE    
  INTEGER  

alTcpFilTable 1.3.6.1.4.1.326.2.6.2.5.7
TCP filter table
OBJECT-TYPE    
  SEQUENCE OF  
    TcpFilEntry

tcpFilEntry 1.3.6.1.4.1.326.2.6.2.5.7.1
TCP filter entry
OBJECT-TYPE    
  TcpFilEntry  

tcpFilNumber 1.3.6.1.4.1.326.2.6.2.5.7.1.1
Filter Number; Range 1-32
OBJECT-TYPE    
  INTEGER  

tcpFilSrcAddr 1.3.6.1.4.1.326.2.6.2.5.7.1.2
Source address
OBJECT-TYPE    
  IpAddress  

tcpFilSrcMask 1.3.6.1.4.1.326.2.6.2.5.7.1.3
Mask
OBJECT-TYPE    
  IpAddress  

tcpFilProtocol 1.3.6.1.4.1.326.2.6.2.5.7.1.4
tcp(1) or udp(2)
OBJECT-TYPE    
  INTEGER  

tcpFilDstPort 1.3.6.1.4.1.326.2.6.2.5.7.1.5
smtp(1000), telnet(2000), ftp(3000) or valid port Number
OBJECT-TYPE    
  INTEGER  

alip 1.3.6.1.4.1.326.2.6.2.6
OBJECT IDENTIFIER    

alArpTableClear 1.3.6.1.4.1.326.2.6.2.6.1
When set, clears the ARP table.
OBJECT-TYPE    
  INTEGER  

alArpAge 1.3.6.1.4.1.326.2.6.2.6.2
Timeout in minutes for aging ARP entries; when set to zero, set-arpage is turned off.
OBJECT-TYPE    
  INTEGER  

alArpStatReqsRcvd 1.3.6.1.4.1.326.2.6.2.6.3
Requests Received.
OBJECT-TYPE    
  Counter  

alArpStatRepliesRcvd 1.3.6.1.4.1.326.2.6.2.6.4
Replies Received.
OBJECT-TYPE    
  Counter  

alArpStatInvalidOpcodes 1.3.6.1.4.1.326.2.6.2.6.5
Invalid Opcodes Received.
OBJECT-TYPE    
  Counter  

alArpStatRequestsSent 1.3.6.1.4.1.326.2.6.2.6.6
Requests Sent.
OBJECT-TYPE    
  Counter  

alArpStatRepliesSent 1.3.6.1.4.1.326.2.6.2.6.7
Replies Sent.
OBJECT-TYPE    
  Counter  

alArpStatProxyReplies 1.3.6.1.4.1.326.2.6.2.6.8
number of proxy replied
OBJECT-TYPE    
  Counter  

alArpDynReqsRcvd 1.3.6.1.4.1.326.2.6.2.6.9
Requests Received.
OBJECT-TYPE    
  Counter  

alArpDynRepliesRcvd 1.3.6.1.4.1.326.2.6.2.6.10
Replies Received.
OBJECT-TYPE    
  Counter  

alArpDynInvalidOpcodes 1.3.6.1.4.1.326.2.6.2.6.11
Invalid Opcodes Received.
OBJECT-TYPE    
  Counter  

alArpDynRequestsSent 1.3.6.1.4.1.326.2.6.2.6.12
Requests Sent.
OBJECT-TYPE    
  Counter  

alArpDynRepliesSent 1.3.6.1.4.1.326.2.6.2.6.13
Replies Sent.
OBJECT-TYPE    
  Counter  

alArpDynProxyReplies 1.3.6.1.4.1.326.2.6.2.6.14
number of proxy replied
OBJECT-TYPE    
  Counter  

alArpStatsClear 1.3.6.1.4.1.326.2.6.2.6.15
When set to 1, clears the ARP statistics.
OBJECT-TYPE    
  INTEGER  

alArpProxyTable 1.3.6.1.4.1.326.2.6.2.6.16
Per port proxy arp enable/disable
OBJECT-TYPE    
  SEQUENCE OF  
    ArpProxyEntry

arpProxyEntry 1.3.6.1.4.1.326.2.6.2.6.16.1
information of a specific arp proxy entry
OBJECT-TYPE    
  ArpProxyEntry  

arpProxyPort 1.3.6.1.4.1.326.2.6.2.6.16.1.1
Port Number
OBJECT-TYPE    
  INTEGER  

arpProxyEnable 1.3.6.1.4.1.326.2.6.2.6.16.1.2
If set to Enable(1), enables proxy arp arp requests received on the port identified by the instance of arpProxyPort. If set to Disable(2), it disables the proxy arp for arp requests received on the ports identified by the instance of arpProxyPort.
OBJECT-TYPE    
  INTEGER  

alIpTemplateTable 1.3.6.1.4.1.326.2.6.2.6.17
Per template information
OBJECT-TYPE    
  SEQUENCE OF  
    AlipTemplateEntry

alipTemplateEntry 1.3.6.1.4.1.326.2.6.2.6.17.1
Information about a filtering template
OBJECT-TYPE    
  AlipTemplateEntry  

alipTemplateNumber 1.3.6.1.4.1.326.2.6.2.6.17.1.1
The number of the template with which it is identified.
OBJECT-TYPE    
  INTEGER 1..256  

alipTemplateDelete 1.3.6.1.4.1.326.2.6.2.6.17.1.2
When set to 1, this entry is deleted.
OBJECT-TYPE    
  INTEGER  

alipTemplateAction 1.3.6.1.4.1.326.2.6.2.6.17.1.3
Whether the packet being filtered should be forwarded or blocked
OBJECT-TYPE    
  INTEGER forward(1), block(2)  

alipTemplateSrcAddr 1.3.6.1.4.1.326.2.6.2.6.17.1.4
The portion of the packet's source address specified by ipTemplateSrcMask is matched with this address.
OBJECT-TYPE    
  IpAddress  

alipTemplateSrcMask 1.3.6.1.4.1.326.2.6.2.6.17.1.5
Source Mask. The portion specified by this mask is matched with source address.
OBJECT-TYPE    
  IpAddress  

alipTemplateDstAddr 1.3.6.1.4.1.326.2.6.2.6.17.1.6
The portion of the packet's destination address specified by ipTemplateDstMask is matched with this address.
OBJECT-TYPE    
  IpAddress  

alipTemplateDstMask 1.3.6.1.4.1.326.2.6.2.6.17.1.7
Destination mask. The portion specified by this mask is matched with destination address.
OBJECT-TYPE    
  IpAddress  

alipTemplateProtocol 1.3.6.1.4.1.326.2.6.2.6.17.1.8
Determines the type of packets that need to be filtered. PowerHub currently recognizes ip(1) , icmp(1), ipinip(4), tcp(6), udp(17), ospf(89). If all(0) is specified, the filter looks for all protocols other than the ones PowerHub currently accepts. The IP protocol numbers are listed in RFC 1340
OBJECT-TYPE    
  INTEGER 0..255  

alipTemplateOperator 1.3.6.1.4.1.326.2.6.2.6.17.1.9
Allowed only if the protocol field is tcp or udp. The following operators allowed: (1) Unknown =(2) Equal to ~=(3) Not equal to <(4) Less than >(5) Greater than conreq(6) Connect request. Connect request is valid only if protocol is tcp
OBJECT-TYPE    
  INTEGER unknown(1), equalto(2), notequalto(3), lessthan(4), greaterthan(5), conreq(6)  

alipTemplateDstPort 1.3.6.1.4.1.326.2.6.2.6.17.1.10
This is expressed as either a well-known protocol name or a well-known tcp or udp port number. 0 means unknown
OBJECT-TYPE    
  INTEGER 0..65535  

alIpRuleTable 1.3.6.1.4.1.326.2.6.2.6.18
Per template information
OBJECT-TYPE    
  SEQUENCE OF  
    AlipRuleEntry

alipRuleEntry 1.3.6.1.4.1.326.2.6.2.6.18.1
Information about a specific filtering rule
OBJECT-TYPE    
  AlipRuleEntry  

alipRuleNumber 1.3.6.1.4.1.326.2.6.2.6.18.1.1
The number of the rule with which it is Identified.
OBJECT-TYPE    
  INTEGER 1..256  

alipRuleDelete 1.3.6.1.4.1.326.2.6.2.6.18.1.2
If set to 1 the entry is deleted.
OBJECT-TYPE    
  INTEGER  

alipRuleTemplates 1.3.6.1.4.1.326.2.6.2.6.18.1.3
The templates associated with the rule identified by the instance of ipRuleNumber.
OBJECT-TYPE    
  DisplayString  

alipAcsCtrlTable 1.3.6.1.4.1.326.2.6.2.6.19
Per port IP access control filters
OBJECT-TYPE    
  SEQUENCE OF  
    AlipAcsCtrlEntry

alipAcsCtrlEntry 1.3.6.1.4.1.326.2.6.2.6.19.1
information of a specific rule applied to segment
OBJECT-TYPE    
  AlipAcsCtrlEntry  

alipAcsCtrlPort 1.3.6.1.4.1.326.2.6.2.6.19.1.1
Port number of the port for which the source and destination access filter apply.
OBJECT-TYPE    
  INTEGER  

alipAcsCtrlDelete 1.3.6.1.4.1.326.2.6.2.6.19.1.2
If set to 1, the entry is deleted.
OBJECT-TYPE    
  INTEGER  

alipAcsCtrlSourceRule 1.3.6.1.4.1.326.2.6.2.6.19.1.3
the source rule is assigned to the segment
OBJECT-TYPE    
  INTEGER  

alipAcsCtrlDestRule 1.3.6.1.4.1.326.2.6.2.6.19.1.4
the destination rule is assigned to the segment
OBJECT-TYPE    
  INTEGER  

alipFilStatStatsTable 1.3.6.1.4.1.326.2.6.2.6.20
Per template static statistics -- stats from the beginning of the last system reboot.
OBJECT-TYPE    
  SEQUENCE OF  
    AlipFilStatStatsEntry

alipFilStatStatsEntry 1.3.6.1.4.1.326.2.6.2.6.20.1
filter statistics entry
OBJECT-TYPE    
  AlipFilStatStatsEntry  

alipFilStatStatsTemplate 1.3.6.1.4.1.326.2.6.2.6.20.1.1
The template number for which the stats are displayed
OBJECT-TYPE    
  Counter  

alipFilStatStatsInPkts 1.3.6.1.4.1.326.2.6.2.6.20.1.2
The number of packets that matched the template identified by the instance of alipFilStatStatsTemplate. The template has to be a Source template.
OBJECT-TYPE    
  Counter  

alipFilStatStatsOutPkts 1.3.6.1.4.1.326.2.6.2.6.20.1.3
The number of packets that matched the template identified by the instance of alipFilStatStatsTemplate. The template has to be a Destination template.
OBJECT-TYPE    
  Counter  

alipFilDynStatsTable 1.3.6.1.4.1.326.2.6.2.6.21
Per template dynamic statistics -- stats from the beginning of the last clear.
OBJECT-TYPE    
  SEQUENCE OF  
    AlipFilDynStatsEntry

alipFilDynStatsEntry 1.3.6.1.4.1.326.2.6.2.6.21.1
information of a specific statistic entry
OBJECT-TYPE    
  AlipFilDynStatsEntry  

alipFilDynStatsTemplate 1.3.6.1.4.1.326.2.6.2.6.21.1.1
The template number for which the stats are displayed
OBJECT-TYPE    
  Counter  

alipFilDynStatsInPkts 1.3.6.1.4.1.326.2.6.2.6.21.1.2
The number of packets that matched the template identified by the instance of alipFilDynStatsTemplate. The template has to be a Source template.
OBJECT-TYPE    
  Counter  

alipFilDynStatsOutPkts 1.3.6.1.4.1.326.2.6.2.6.21.1.3
The number of packets that matched the template identified by the instance of alipFilDynStatsTemplate. The template has to be a Destination template.
OBJECT-TYPE    
  Counter  

alipFilDynStatsClear 1.3.6.1.4.1.326.2.6.2.6.21.1.4
Setting the value of 1, it will clear all the stats for the template identified by the instance of alipFilDynStatsTemplate.
OBJECT-TYPE    
  INTEGER  

alipTotalFilPacketForward 1.3.6.1.4.1.326.2.6.2.6.22
The total number of packets forwarded since last system reset.
OBJECT-TYPE    
  Counter  

alipTotalFilPacketBlock 1.3.6.1.4.1.326.2.6.2.6.23
The total number of packets blocked since last system reset.
OBJECT-TYPE    
  Counter  

alipCurrentFilPacketForward 1.3.6.1.4.1.326.2.6.2.6.24
The total number of packets forwarded since the last statistical clear.
OBJECT-TYPE    
  Counter  

alipCurrentFilPacketBlock 1.3.6.1.4.1.326.2.6.2.6.25
The total number of packets blocked since the last statistical clear.
OBJECT-TYPE    
  Counter  

alIpInterfaceTable 1.3.6.1.4.1.326.2.6.2.6.26
IP interface table corresponding to the command - interface-table.
OBJECT-TYPE    
  SEQUENCE OF  
    AlIpInterfaceEntry

alIpInterfaceEntry 1.3.6.1.4.1.326.2.6.2.6.26.1
Entry of IP interface
OBJECT-TYPE    
  AlIpInterfaceEntry  

ipInterfaceNumber 1.3.6.1.4.1.326.2.6.2.6.26.1.1
Segment number of the selecetd IP address interface entry.
OBJECT-TYPE    
  INTEGER  

ipInterfaceAddress 1.3.6.1.4.1.326.2.6.2.6.26.1.2
IP address of the selected IP segment number.
OBJECT-TYPE    
  IpAddress  

ipInterfaceSubnetMask 1.3.6.1.4.1.326.2.6.2.6.26.1.3
IP subnet mask for the selected IP address.
OBJECT-TYPE    
  IpAddress  

ipInterfaceBroadCast 1.3.6.1.4.1.326.2.6.2.6.26.1.4
Specifies style of broadcast address on a segment basis: when you specify 'br0', the hub sends an 'all-0s' broadcast; when you sepcify 'br1', the hub sends 'all-1s' broadcast. The default is 'br1'.
OBJECT-TYPE    
  INTEGER br0(1), br1(2)  

ipInterfaceCost 1.3.6.1.4.1.326.2.6.2.6.26.1.5
Specifies an additiopnal cost of using the subnet interface. This cost is the number of extra hops to the destination. The range is 1 thru 14. The default is 0. When you set the cost to a value greater than zero, routing is forced thru the other hub if it is alive.
OBJECT-TYPE    
  INTEGER 0..14  

ipInterfaceDelete 1.3.6.1.4.1.326.2.6.2.6.26.1.6
When this object is set with value 1, the IP interface corresponds to the segment number will be deleted; otherwise this object returns value 0.
OBJECT-TYPE    
  INTEGER  

ipInterfaceMtu 1.3.6.1.4.1.326.2.6.2.6.26.1.7
Displays the maximum transimission unit size allowed on this IP interface.
OBJECT-TYPE    
  INTEGER  

ipInterfaceState 1.3.6.1.4.1.326.2.6.2.6.26.1.8
Displays the up/down status of the IP interface.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

ipInterfacePktsIn 1.3.6.1.4.1.326.2.6.2.6.26.1.9
Total number of packets received on this interface.
OBJECT-TYPE    
  Counter  

ipInterfaceOctetsIn 1.3.6.1.4.1.326.2.6.2.6.26.1.10
Total number of bytes received on this interface.
OBJECT-TYPE    
  Counter  

ipInterfacePktsOut 1.3.6.1.4.1.326.2.6.2.6.26.1.11
Total number of packets transmitted to the network by this interface.
OBJECT-TYPE    
  Counter  

ipInterfaceOctetsOut 1.3.6.1.4.1.326.2.6.2.6.26.1.12
Total number of bytes transimitted to the network by this interface.
OBJECT-TYPE    
  Counter  

alIpRtCacheTable 1.3.6.1.4.1.326.2.6.2.6.27
IP Route Cache for all ports
OBJECT-TYPE    
  SEQUENCE OF  
    AlIpRtCacheEntry

alIpRtCacheEntry 1.3.6.1.4.1.326.2.6.2.6.27.1
IP Route cache for each port
OBJECT-TYPE    
  AlIpRtCacheEntry  

ipRtCachePort 1.3.6.1.4.1.326.2.6.2.6.27.1.1
Port number for the ip route cache.
OBJECT-TYPE    
  INTEGER  

ipRtCacheDstAddress 1.3.6.1.4.1.326.2.6.2.6.27.1.2
Ip route cache destination address.
OBJECT-TYPE    
  INTEGER  

ipRtCacheClear 1.3.6.1.4.1.326.2.6.2.6.27.1.3
Setting this to Clear(1), will clear the routecache for the port and Destination address identified by the instance of ipRtCachePort and ipRtCacheDstAddress.
OBJECT-TYPE    
  INTEGER  

alVlanIpInterfaceTable 1.3.6.1.4.1.326.2.6.2.6.28
Vlan IP interface table corresponding to the command - vlan add/del IP interface.
OBJECT-TYPE    
  SEQUENCE OF  
    AlVlanIpInterfaceEntry

alVlanIpInterfaceEntry 1.3.6.1.4.1.326.2.6.2.6.28.1
Entry of Vlan IP interface
OBJECT-TYPE    
  AlVlanIpInterfaceEntry  

vlanIpInterfaceNameLen 1.3.6.1.4.1.326.2.6.2.6.28.1.1
The string length of Vlan name of the selecetd vlan IP interface entry.
OBJECT-TYPE    
  INTEGER  

vlanIpInterfaceName 1.3.6.1.4.1.326.2.6.2.6.28.1.2
Vlan name of the selecetd vlan IP interface entry.
OBJECT-TYPE    
  DisplayString  

vlanIpInterfaceAddress 1.3.6.1.4.1.326.2.6.2.6.28.1.3
IP address of the selected vlan IP interface entry.
OBJECT-TYPE    
  IpAddress  

vlanIpInterfaceSubnetMask 1.3.6.1.4.1.326.2.6.2.6.28.1.4
IP subnet mask for the selected vlan IP interface entry.
OBJECT-TYPE    
  IpAddress  

vlanIpInterfaceType 1.3.6.1.4.1.326.2.6.2.6.28.1.5
Specifies type of interface of vlan The types are are broadcast, nbma (nonBroadcastMultiAccess i.e.,CLIP), ptop (i.e.,PVC). Default is broadcast. The discontinuos enumeration values actually mean bitmask value which maps to bit positions in the agent.
OBJECT-TYPE    
  INTEGER broadcast(1), nbma(2), pointToPoint(4)  

vlanIpInterfaceNeighborAddress 1.3.6.1.4.1.326.2.6.2.6.28.1.6
Specifies the ip address of neightbors of the interfaces of the vlan. This object apply only when interface type is pointToPoint.
OBJECT-TYPE    
  IpAddress  

vlanIpInterfaceRowStatus 1.3.6.1.4.1.326.2.6.2.6.28.1.7
The status of the table. The table can not be changed when it is active.
OBJECT-TYPE    
  INTEGER active(1), notInservice(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

Defined Objects

AlripNormalConfigEntry  
SEQUENCE    
  INTEGER as alripNormalConfigPort  
  INTEGER as alripNormalConfigTalk  
  INTEGER as alripNormalConfigListen  
  INTEGER as alripNormalConfigPoison  
  INTEGER as alripNormalConfigRptStaticRt  
  INTEGER as alripNormalConfigRptDefaultRt  
  INTEGER as alripNormalConfigAccptDefaultRt  

AlripVLANConfigEntry  
SEQUENCE    
  IpAddress as alripVLANConfigNetNumber  
  INTEGER as alripVLANConfigTalk  
  INTEGER as alripVLANConfigListen  
  INTEGER as alripVLANConfigPoison  
  INTEGER as alripVLANConfigRptStaticRt  
  INTEGER as alripVLANConfigRptDefaultRt  
  INTEGER as alripVLANConfigAccptDefaultRt  
  INTEGER as alripVLANConfigDelete  

RipAccptFilEntry  
SEQUENCE    
  INTEGER as ripAccptFilNumber 1..64  
  IpAddress as ripAccptFilAddr  
  IpAddress as ripAccptFilMask  
  INTEGER as ripAccptFilPort 1..14  

RipReportFilEntry  
SEQUENCE    
  INTEGER as ripReportFilNumber 1..64  
  IpAddress as ripReportFilAddr  
  IpAddress as ripReportFilMask  
  INTEGER as ripReportFilPort 1..14  

AlTcpConnEntry  
SEQUENCE    
  INTEGER as alTcpConnId  
  INTEGER as alTcpConnState  
  IpAddress as alTcpConnLocalAddress  
  INTEGER as alTcpConnLocalPort  
  IpAddress as alTcpConnRemAddress  
  INTEGER as alTcpConnRemPort  

TcpFilEntry  
SEQUENCE    
  INTEGER as tcpFilNumber  
  IpAddress as tcpFilSrcAddr  
  IpAddress as tcpFilSrcMask  
  INTEGER as tcpFilProtocol  
  INTEGER as tcpFilDstPort  

ArpProxyEntry  
SEQUENCE    
  INTEGER as arpProxyPort  
  INTEGER as arpProxyEnable  

AlipTemplateEntry  
SEQUENCE    
  INTEGER as alipTemplateNumber  
  INTEGER as alipTemplateDelete  
  INTEGER as alipTemplateAction  
  IpAddress as alipTemplateSrcAddr  
  IpAddress as alipTemplateSrcMask  
  IpAddress as alipTemplateDstAddr  
  IpAddress as alipTemplateDstMask  
  INTEGER as alipTemplateProtocol  
  INTEGER as alipTemplateOperator  
  INTEGER as alipTemplateDstPort  

AlipRuleEntry  
SEQUENCE    
  INTEGER as alipRuleNumber  
  INTEGER as alipRuleDelete  
  DisplayString as alipRuleTemplates  

AlipAcsCtrlEntry  
SEQUENCE    
  INTEGER as alipAcsCtrlPort  
  INTEGER as alipAcsCtrlDelete  
  INTEGER as alipAcsCtrlTarget  
  INTEGER as alipAcsCtrlRuleNumber  

AlipFilStatStatsEntry  
SEQUENCE    
  Counter as alipFilStatStatsTemplate  
  Counter as alipFilStatStatsInPkts  
  Counter as alipFilStatStatsOutPkts  

AlipFilDynStatsEntry  
SEQUENCE    
  Counter as alipFilDynStatsTemplate  
  Counter as alipFilDynStatsInPkts  
  Counter as alipFilDynStatsOutPkts  
  Counter as alipFilDynStatsClear  

AlIpInterfaceEntry  
SEQUENCE    
  INTEGER as ipInterfaceNumber  
  IpAddress as ipInterfaceAddress  
  IpAddress as ipInterfaceSubnetMask  
  INTEGER as ipInterfaceBroadCast  
  INTEGER as ipInterfaceCost 0..14  
  INTEGER as ipInterfaceDelete  
  INTEGER as ipInterfaceMtu  
  INTEGER as ipInterfaceState  
  Counter as ipInterfacePktsIn  
  Counter as ipInterfaceOctetsIn  
  Counter as ipInterfacePktsOut  
  Counter as ipInterfaceOctetsOut  

AlIpRtCacheEntry  
SEQUENCE    
  INTEGER as ipRtCachePort  
  IpAddress as ipRtCacheDstAddress  
  INTEGER as ipRtCacheClear  

AlVlanIpInterfaceEntry  
SEQUENCE    
  INTEGER as vlanIpInterfaceNameLen  
  DisplayString as vlanIpInterfaceName  
  IpAddress as vlanIpInterfaceAddress  
  IpAddress as vlanIpInterfaceSubnetMask  
  INTEGER as vlanIpInterfaceType  
  IpAddress as vlanIpInterfaceNeighborAddress  
  INTEGER as vlanIpInterfaceRowStatus