PRIVAT-MultiLAN-Switch-MIB

File: PRIVAT-MultiLAN-Switch-MIB.mib (71625 bytes)

Imported modules

SNMPv2-TC RFC1155-SMI RFC-1215

Imported symbols

DisplayString IpAddress TimeTicks
OBJECT-TYPE TRAP-TYPE

Defined Objects

private 1.3.6.1.4
OBJECT IDENTIFIER    

enterprises 1.3.6.1.4.1
OBJECT IDENTIFIER    

hirschmann 1.3.6.1.4.1.248
OBJECT IDENTIFIER    

multiLANSwitch 1.3.6.1.4.1.248.2
OBJECT IDENTIFIER    

bridge1 1.3.6.1.4.1.248.2.1
OBJECT IDENTIFIER    

bridgemgmt 1.3.6.1.4.1.248.2.1.1
OBJECT IDENTIFIER    

bridgeHealth 1.3.6.1.4.1.248.2.1.1
The hirmaBridgeHealth trap information relates to the operational state of the MultiLAN Switch. This trap is sent only when the health state of the MultiLAN Switch changes. The hirmaBridgeHealth trap must contain the hirmaBasBridgeHealthState variable. The MultiLANSwitch optionally includes hirmaBasBridgeHealthText and hirmaBasBridgeHealthData in the varBind list. See hirmaBasHubHealthState, hirmaBasHubHealthText and hirmaBasHubHealthData objects for descriptions of the information that are sent.
TRAP-TYPE    
  hirmaBasBridgeHealthState  

hirmaBasCapability 1.3.6.1.4.1.248.2.1.1.1
OBJECT IDENTIFIER    

hirmaBasBridgeTable 1.3.6.1.4.1.248.2.1.1.1.1
OBJECT IDENTIFIER    

hirmaBasBridgeGroupCapacity 1.3.6.1.4.1.248.2.1.1.1.1.1
The number of slots of the MultiLAN Switch.
OBJECT-TYPE    
  INTEGER  

hirmaBasBridgeGroupMap 1.3.6.1.4.1.248.2.1.1.1.1.2
This Bitfield represents the current Interface card configuration. The least significant bit indicates the left slot with the number 1. Each interface card (group) of the MultiLAN Switch is represented by a single bit. The value of a bit=1 indicates that the group is present.
OBJECT-TYPE    
  INTEGER  

hirmaBasBridgeSoftVersion 1.3.6.1.4.1.248.2.1.1.1.1.3
A string that contains information about the software release currently in use
OBJECT-TYPE    
  DisplayString  

hirmaBasBridgeHardVersion 1.3.6.1.4.1.248.2.1.1.1.1.4
A string that contains information about the underlying hardware
OBJECT-TYPE    
  DisplayString  

hirmaBasBridgeMibVersion 1.3.6.1.4.1.248.2.1.1.1.1.5
A string that contains information about the current private MIB release
OBJECT-TYPE    
  DisplayString  

hirmaBasBridgeSpanningTreeVersion 1.3.6.1.4.1.248.2.1.1.1.1.6
A string that contains information about the current Spanning Tree Version.
OBJECT-TYPE    
  DisplayString  

hirmaBasBridgeSwitches 1.3.6.1.4.1.248.2.1.1.1.1.7
State of the DIP-switches on the memoryboard (EBGM). The DIP-switches are defined as follows: switch | on | off ------------------------------------------------- 1 | service | normal 2 | service | normal 3 | relay on | relay off 4 | LANswitch | 802.3 Bridge 5 | service | normal 6 | Spanning Tree on | Spanning Tree off 7 | Filtering on | Filtering off 8 | Learning on | Learning off
OBJECT-TYPE    
  INTEGER  

hirmaBasBridgePwrSplyState 1.3.6.1.4.1.248.2.1.1.1.1.8
Used to indicate the state of the power supplies. 5V1 corresponds to the first power supply on the left side, etc.
OBJECT-TYPE    
  INTEGER ok(1), error5V1(2), error5V2(3), error5V1and5V2(4), error5V3(5), error5V1and5V3(6), error5V2and5v3(7), error5v1and5v2and5v3(8)  

hirmaBasBridgeFanState 1.3.6.1.4.1.248.2.1.1.1.1.9
Used to indicate the fan state. If one of the two fans rotating speed is under value, hirmaBasBridgeFanState will change to nofunction (2).
OBJECT-TYPE    
  INTEGER ok(1), nofunction(2)  

hirmaBasBridgePwrAlarm 1.3.6.1.4.1.248.2.1.1.1.1.10
If enabled (1), the health-trap will be sent in case of a power supply failure.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

hirmaBasBridgeHealthAlarm 1.3.6.1.4.1.248.2.1.1.1.1.11
If enabled (1), the health-trap will be sent in case of any kind of failure. Sending of a health-trap in case of a power supply can not be disabled by this attribute (use hirmaBasBridgePwrAlarms instead).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

hirmaBasBridgeSpanningTree 1.3.6.1.4.1.248.2.1.1.1.1.12
Used to indicate and set the state of the spanning tree mode. Note: Setting this variable to enabled (1), enables also the learning and the filtering mode. Setting this variable to disabled (2), disables only the spanning tree mode.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

hirmaBasBridgeHealthState 1.3.6.1.4.1.248.2.1.1.1.1.13
The BridgeHealthState indicates the operational state of the MultiLAN Switch. The BridgeHealthData and BridgeHealthText may be consulted for more specific information about this state.
OBJECT-TYPE    
  INTEGER other(1), ok(2), generalFailure(3), multiLANSwitchFailure(4)  

hirmaBasBridgeHealthText 1.3.6.1.4.1.248.2.1.1.1.1.14
The BridgeHealthText provides information relevant to the operational state of the MultiLAN Switch.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

hirmaBasBridgeHealthData 1.3.6.1.4.1.248.2.1.1.1.1.15
The BridgeHealthData is a block of data octets that provides information relevant to the operational state of the MultiLAN Switch.
OBJECT-TYPE    
  OCTET STRING SIZE(0..255)  

hirmaBasBridgeCounterReset 1.3.6.1.4.1.248.2.1.1.1.1.16
Resets all non port related counters of the MultiLAN Switch. Note: Setting this variable to noReset (2) has no effect. The agent will always return the value noReset (2) in response to a GetRequest.
OBJECT-TYPE    
  INTEGER reset(1), no-reset(2)  

hirmaBasBridgeEventTable 1.3.6.1.4.1.248.2.1.1.1.2
OBJECT-TYPE    
  SEQUENCE OF  
    HirmaBasBridgeEventEntry

hirmaBasBridgeEventEntry 1.3.6.1.4.1.248.2.1.1.1.2.1
OBJECT-TYPE    
  HirmaBasBridgeEventEntry  

hirmaBasBridgeMessageID 1.3.6.1.4.1.248.2.1.1.1.2.1.1
Used to uniquely identify messages within this table. Note: This table is as a ring buffer, a new entry in the table may overwrite the oldest message in the table.
OBJECT-TYPE    
  INTEGER  

hirmaBasBridgeMessageIfIndex 1.3.6.1.4.1.248.2.1.1.1.2.1.2
Used to uniquely identify the interface where the event has appeared.
OBJECT-TYPE    
  INTEGER  

hirmaBasBridgeMessage 1.3.6.1.4.1.248.2.1.1.1.2.1.3
This object shows the message code according to the following table. 1) error message Code |Display| Description *********************************************** 0x45:0f | O | buffer overflow 0x45:91 | O | buffer overflow recovered 0x45:b3 | S | no carrier sense response 0x48:f6 | V | redundant power supply error 0x01:4f | A-a | shut-down TFTP transmission 0x81:a2 | A-b | TFTP transmission error 0x01:64 | A-t | TFTP transmission time out 0x01:65 | A-u | no TFTP server attached | C-g | TCP communication problemes | C-n | all TCP-devices are busy | C-r | TCP rexmit timeout probleme 0x05:a5 | E-e | inaccessible transmission 0x05:88 | E-h | wrong LAN-controller state 0x05:ac | E-l | late collision detection 0x05:ad | E-m | too many collisions 0x05:b6 | E-u | internal transmission error 0x05:b8 | E-x | shut-down transmission 0x06:a1 | F-a | address table overflow 0x07:ce | F-b | inaccessible address table 0x06:a6 | F-f | type field table overflow 0x06:ad | F-m | rejected management packet (rx) 0x06:af | F-o | filter table overflow 0x06:b3 | F-s | filter table overflow 0x08:d7 | H-w | watchdog time out 0x09:89 | I-i | missing IP-address 0x09:8e | I-n | no response with RARP | O-b | TCP buffer overflow | O-f | no TCP connection | O-k | TCP transmission error | O-n | disabled TCP device | S-c | wrong INI-file 2) fatal error messages Code |Display| Errorcode *********************************************** 0x85:84 | E-d | LAN-controller test failed 0x85:87 | E-g | LAN-controller disabled 0x85:94 | E-t | LAN-controller error 0x88:8a | H-j | wrong master or malfunction 0x88:8d | H-m | no attached master 0x88:90 | H-p | processor test failed 0x8d:87 | M-g | global memory test failed 0x8d:8c | M-l | local memory test failed 0x8d:92 | M-r | ROM checksum test failed
OBJECT-TYPE    
  OCTET STRING  

hirmaBasBridgeMessageTime 1.3.6.1.4.1.248.2.1.1.1.2.1.4
The value of sysUpTime when the message has occured. The time unit is tens of milliseconds.
OBJECT-TYPE    
  TimeTicks  

hirmaBasGroupTable 1.3.6.1.4.1.248.2.1.1.1.3
OBJECT-TYPE    
  SEQUENCE OF  
    HirmaBasGroupEntry

hirmaBasGroupEntry 1.3.6.1.4.1.248.2.1.1.1.3.1
OBJECT-TYPE    
  HirmaBasGroupEntry  

hirmaBasGroupID 1.3.6.1.4.1.248.2.1.1.1.3.1.1
Used to uniquely identify an interface card within the MultiLAN Switch.
OBJECT-TYPE    
  INTEGER  

hirmaBasGroupNumOfPorts 1.3.6.1.4.1.248.2.1.1.1.3.1.2
Number of ports of the associated interface card.
OBJECT-TYPE    
  INTEGER  

hirmaBasGroupPortMap 1.3.6.1.4.1.248.2.1.1.1.3.1.3
Used to uniquely map interface numbers and interface card numbers. Both, interfaces and interface cards are numbered within a range of 1 to the maximum number of interface cards, where the interface card list may contain holes in case that an interface card is not present. E.g. this value may contain '6', which indicates that this port of this interface card is currently handled as interface number 6. In case of multiple interfaces (ports) per interface card, the numbers are separated with a comma (e.g. '5,6').
OBJECT-TYPE    
  DisplayString  

hirmaBasGroupName 1.3.6.1.4.1.248.2.1.1.1.3.1.4
Name of the interface cards. E.g : EBAUI, EBTP ...
OBJECT-TYPE    
  DisplayString  

hirmaBasPortTable 1.3.6.1.4.1.248.2.1.1.1.4
OBJECT-TYPE    
  SEQUENCE OF  
    HirmaBasPortEntry

hirmaBasPortEntry 1.3.6.1.4.1.248.2.1.1.1.4.1
OBJECT-TYPE    
  HirmaBasPortEntry  

hirmaBasPortID 1.3.6.1.4.1.248.2.1.1.1.4.1.1
Used to uniquely identify an interface (port) within the MultiLAN Switch. Note: The interfaces (ports) are numbered in ascending order from the left side to the right side, within a range of 1 to n.
OBJECT-TYPE    
  INTEGER  

hirmaBasPortGroupID 1.3.6.1.4.1.248.2.1.1.1.4.1.2
Used to identify the associated interface card.
OBJECT-TYPE    
  INTEGER  

hirmaBasPortLanType 1.3.6.1.4.1.248.2.1.1.1.4.1.3
Used to identify different LAN types.
OBJECT-TYPE    
  INTEGER ethernet(1), fddi(2)  

hirmaBasPortType 1.3.6.1.4.1.248.2.1.1.1.4.1.4
Used to identify the physical media type of the interface card
OBJECT-TYPE    
  INTEGER aui(1), optical-asynch-850(2), optical-asynch-1300-16(3), optical-asynch-1300-40(4), unshielded-TP-10BaseT(5)  

hirmaBasPortShortDelay 1.3.6.1.4.1.248.2.1.1.1.4.1.5
Used to change the operation mode between ethernet switching and 802.3 CSMA/CD.
OBJECT-TYPE    
  INTEGER ieee802-3(1), ethernet-switch(2)  

hirmaBasPortLearning 1.3.6.1.4.1.248.2.1.1.1.4.1.6
Used to indicate whether the learning mode of this port is enabled or disabled. Note: The learning mode may only be disabled (2) if the spanning tree mode is disabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

hirmaBasPortFiltering 1.3.6.1.4.1.248.2.1.1.1.4.1.7
Used to indicate whether the filtering mode of this port is enabled or disabled. Note: The filtering mode may only be disabled (2) if the spanning tree mode is disabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

hirmaBasPortRelay 1.3.6.1.4.1.248.2.1.1.1.4.1.8
If enabled (1), all packets will be forwarded. Otherwise only packets with known addresses will be forwarded.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

hirmaBasPortMode 1.3.6.1.4.1.248.2.1.1.1.4.1.9
Indicates the transmission mode of the interface card. This mode can be adjusted by a jumper on the interface card
OBJECT-TYPE    
  INTEGER half-duplex(1), full-duplex(2)  

hirmaBasPortCounterReset 1.3.6.1.4.1.248.2.1.1.1.4.1.10
Resets all port related counters. Note: Setting this variable to no reset (2) has no effect. The agent will always return the value no-reset (2) in response to a GetRequest.
OBJECT-TYPE    
  INTEGER reset(1), no-reset(2)  

hirmaBasPortState 1.3.6.1.4.1.248.2.1.1.1.4.1.11
Indicates the operational state of the port such as -normal-, -carrier sense-, -jabber-, -idle-, etc.
OBJECT-TYPE    
  DisplayString  

hirmaSelfTestCapability 1.3.6.1.4.1.248.2.1.1.2
OBJECT IDENTIFIER    

hirmaSelfTestBridgeReset 1.3.6.1.4.1.248.2.1.1.2.1
Setting this value to reset (1), forces the MultiLAN Switch to reset according to the type in hirmaSelfTestBridgeResetType.
OBJECT-TYPE    
  INTEGER reset(1), no-reset(2)  

hirmaSelfTestBridgeResetType 1.3.6.1.4.1.248.2.1.1.2.2
Type of resetwhich will be executed if hirmaSelfTestBridgeReset will be set to reset.
OBJECT-TYPE    
  INTEGER warm-start(1), cold-start(2)  

hirmaSelfTestBridgeSetDefaults 1.3.6.1.4.1.248.2.1.1.2.3
Resets all parameters to the default value. Just like after a cold-start.
OBJECT-TYPE    
  INTEGER reset(1), no-reset(2)  

hirmaSelfTestGroupTable 1.3.6.1.4.1.248.2.1.1.2.4
OBJECT-TYPE    
  SEQUENCE OF  
    HirmaSelfTestGroupEntry

hirmaSelfTestGroupEntry 1.3.6.1.4.1.248.2.1.1.2.4.1
OBJECT-TYPE    
  HirmaSelfTestGroupEntry  

hirmaSelfTestGroupID 1.3.6.1.4.1.248.2.1.1.2.4.1.1
Used to uniquely identify a interface card.
OBJECT-TYPE    
  INTEGER  

hirmaSelfTestGroupDisplayTest 1.3.6.1.4.1.248.2.1.1.2.4.1.2
Starts the internal display test.
OBJECT-TYPE    
  INTEGER test(1), no-test(2)  

hirmaSelfTestGroupSQETest 1.3.6.1.4.1.248.2.1.1.2.4.1.3
Reading this value will offer the state of the SQE test. SQE test may be enabled by setting this object to enabled (1). Detecting a SQE test problem will change the value to not-ok (3).
OBJECT-TYPE    
  INTEGER enabled-ok(1), disabled(2), not-ok(3)  

hirmaFilterCapability 1.3.6.1.4.1.248.2.1.1.3
OBJECT IDENTIFIER    

hirmaFilterMaxNumOfFilters 1.3.6.1.4.1.248.2.1.1.3.1
Number of filters in the following table.
OBJECT-TYPE    
  INTEGER  

hirmaFilterTable 1.3.6.1.4.1.248.2.1.1.3.2
OBJECT-TYPE    
  SEQUENCE OF  
    HirmaFilterTableEntry

hirmaFilterTableEntry 1.3.6.1.4.1.248.2.1.1.3.2.1
OBJECT-TYPE    
  HirmaFilterTableEntry  

hirmaFilterID 1.3.6.1.4.1.248.2.1.1.3.2.1.1
Used to uniquely identify an extended filter. The filter ID ranges between 1 and hirmaFilterMaxNumOfFilters. Caution: Throughput rate will decrease the more extended filters are used.
OBJECT-TYPE    
  INTEGER  

hirmaFilterMode 1.3.6.1.4.1.248.2.1.1.3.2.1.2
Setting this variable to forward (1), will forward all packets that match on a single filter. Setting this variable to discard (3), will discard all packets that match on a single filter. Setting this variable to disable (2), will only forward or discard packets according to the learning tables. Setting this variable to alone (4), the packets are filtered with the private filter (forward) and than filtered with the normaly filter. Setting this variable to channel (5), between the ports hirmaFilterPortIn and hirmaFilterPortOut exists a channel. Setting this variable to delete (6), the filter entry will be deleted from the filter structure. Note: One single filter is defined as a set of hirmaFilterDest, hirmaFilterSrc, hirmaFilterType and hirmaFilterPortIn, where each entry may also be left unused. Forward on match will forward all packets to the specified output port(s). Discard on match will discard all packets regardless to any specified output port(s).
OBJECT-TYPE    
  INTEGER forward(1), disable(2), discard(3), alone(4), channel(5), delete(6)  

hirmaFilterDest 1.3.6.1.4.1.248.2.1.1.3.2.1.3
This display string identifies the MAC address(es) for a single or a set of destination adress filters. For example; 00:80:63:01:02:03-00:80:63:04:05:06 defines a set of MAC addresses as a destination address filter. 00:80:63:01:02:03 defines particularly one MAC destination address filter. Set an empty string to delete the previously defined address. Note: The maximum range runs from XX:XX:XX:00:00:00 to XX:XX:XX:FF:FF:FF. Setting of larger ranges will be ignored.
OBJECT-TYPE    
  DisplayString  

hirmaFilterSrc 1.3.6.1.4.1.248.2.1.1.3.2.1.4
This display string identifies the MAC address(es) for a single or a set of source address filters. For example; 00:80:63:01:02:03-00:80:63:04:05:06 defines a set of MAC addresses as a source address filter. 00:80:63:01:02:03 defines particularly one MAC source adress filter. Set an empty string to delete the previously defined address. Note: The maximum range runs from XX:XX:XX:00:00:00 to XX:XX:XX:FF:FF:FF. Setting of larger ranges will be ignored.
OBJECT-TYPE    
  DisplayString  

hirmaFilterType 1.3.6.1.4.1.248.2.1.1.3.2.1.5
This display string represents a single or a set of protocol types . For example; 8001-8006 defines a set of protocol types filter 8063 defines particularly one protocol types filter Set an empty string to delete the previously defined type. Note: The maximum range runs from XX00 to XXFF. Setting of larger ranges will be ignored. Example of protocols: type 2 bytes | protocols ****************************************** 809B | AppleTalk 6007 | DEC LAVC, SCA 0800 | DoD IP 0803 | ECMA Internet 00FE | ISO DIS 8473 (LSAP) 0003 | LLC (Group) Sublayer Mgmt. 814C | SNMP -------------------------------------------- 6000-6009 | 10 DEC protocols Set an empty string to delete the previously defined type. Note: The maximum range runs from XXX0 to XXXF. Setting of larger ranges will be ignored.
OBJECT-TYPE    
  DisplayString  

hirmaFilterPortIn 1.3.6.1.4.1.248.2.1.1.3.2.1.6
Input ports, separated by commas. For example; 1,2,5,6 means, that only packets received on these 4 ports match this filter. Set an empty string to delete the previously defined ports.
OBJECT-TYPE    
  DisplayString  

hirmaFilterPortOut 1.3.6.1.4.1.248.2.1.1.3.2.1.7
Output ports, separated by commas. For example; 1,2,5,6 means, that matching packets will be forwarded to these 4 ports. Set an empty string to delete the previously defined ports
OBJECT-TYPE    
  DisplayString  

hirmaAddrBTCapability 1.3.6.1.4.1.248.2.1.1.4
OBJECT IDENTIFIER    

hirmaAddrBTAddr 1.3.6.1.4.1.248.2.1.1.4.1
All following addresses excluding this address will be listed. In general the last address of the previous block is used as the starting address of the next block. The address 00:00:00:00:00:00 is the start address to get the first block.
OBJECT-TYPE    
  MacAddress  

hirmaAddrBTBlock 1.3.6.1.4.1.248.2.1.1.4.2
Offers a block of address information. This list of the address entries is not lexicographically ordered. Byte (n*10) m | State **************************************** Byte m=0 | reserved Byte m=1 | Bit 0..2; 4 | reserved Bit 3 | MultiLAN Switch MAC address Bit 5 | static, entered by mgmt Bit 6 | aged out Bit 7 | valid Byte m=2 | interface card, where the | address appeared. Byte m=3 | reserved Byte m=4..m=9 | MAC address Where n is the number of address entries. So, each address block is aligned to n*10 Bytes.
OBJECT-TYPE    
  OCTET STRING  

hirmaLoadCapability 1.3.6.1.4.1.248.2.1.1.5
OBJECT IDENTIFIER    

hirmaFlashUpdate 1.3.6.1.4.1.248.2.1.1.5.1
OBJECT IDENTIFIER    

hirmaFlashUpdateIPAddr 1.3.6.1.4.1.248.2.1.1.5.1.1
The IP-address of the update-server.
OBJECT-TYPE    
  IpAddress  

hirmaFlashUpdateName 1.3.6.1.4.1.248.2.1.1.5.1.2
This string contains the full pathname and name of the update file.
OBJECT-TYPE    
  DisplayString  

hirmaFlashUpdateAction 1.3.6.1.4.1.248.2.1.1.5.1.3
Setting this variable to program will force the MultiLAN Switch to run a software update defined by the update file in hirmaFlashUpdateName and the update server defined in hirmaFlashUpdateIPAddr. Note: Setting this variable to normal mode (2) has no effect. The agent will always return normal mode (2) in response to a GetRequest.
OBJECT-TYPE    
  INTEGER program(1), normal-mode(2)  

hirmaLoadSaveConfig 1.3.6.1.4.1.248.2.1.1.5.2
OBJECT IDENTIFIER    

hirmaLoadSaveConIPAddr 1.3.6.1.4.1.248.2.1.1.5.2.1
Tree different values are possible: 1: 0.0.0.0 will cause the MultiLAN Switch to set all read/write attributes to a default value in case of warm/cold start. 2: Setting this value to the IP address of the MultiLAN Switch will cause the Switch in case of a warm/cold start to load the configuration from the flash eprom which has been previously saved into the flash eprom by issueing a Set request to hirmaLoadSaveConAction.0 = 3. 3: The address of an existing tftp server, where to read a configuration file from in case of a Set request hirmaLoadSaveConAction.0 = 1 or a warm/cold start.
OBJECT-TYPE    
  IpAddress  

hirmaLoadSaveConName 1.3.6.1.4.1.248.2.1.1.5.2.2
This string contains the full pathname and name of the configuration file.
OBJECT-TYPE    
  DisplayString  

hirmaLoadSaveConAction 1.3.6.1.4.1.248.2.1.1.5.2.3
Setting this attribute to 1 (load) will cause the Switch to read a configuration file from a tftp server in case that an existing tftp server is given by hirmaLoadSaveConIPAddr. See the description of hirmaLoadSaveConIPAdd for more details. 3 (save) will cause the Switch to save all read/write attributes in the flash eprom. Setting this variable to normal mode (2) has no effect. The agent will always return the value normal-mode (2) in response to a GetRequest.
OBJECT-TYPE    
  INTEGER load(1), normal-mode(2), save(3)  

hirmaMibhHandler 1.3.6.1.4.1.248.2.1.2
OBJECT IDENTIFIER    

hirmaMibhCommTable 1.3.6.1.4.1.248.2.1.2.1
OBJECT-TYPE    
  SEQUENCE OF  
    HirmaMibhCommEntry

hirmaMibhCommEntry 1.3.6.1.4.1.248.2.1.2.1.1
OBJECT-TYPE    
  HirmaMibhCommEntry  

hirmaMibhCommIndex 1.3.6.1.4.1.248.2.1.2.1.1.1
Used to uniquely identify an object in the table.
OBJECT-TYPE    
  INTEGER  

hirmaMibhCommCommunity 1.3.6.1.4.1.248.2.1.2.1.1.2
Community string which the access rights are assigned to. New communities may be defined by setting community string to any non-empty string. Use an empty string to delete table entries.
OBJECT-TYPE    
  DisplayString  

hirmaMibhCommAccess 1.3.6.1.4.1.248.2.1.2.1.1.3
Access rights of the community. Warning: If you set the access rights of all non-trap communities to read-only you will not be able to write any MIB variable. If you set the access rights of all communities that contain this MIB attribute to read-only, you will not be able to modify any access rights later.
OBJECT-TYPE    
  INTEGER not-accesible(1), read-only(2), read-write(3)  

hirmaMibhAccessTable 1.3.6.1.4.1.248.2.1.2.2
OBJECT-TYPE    
  SEQUENCE OF  
    HirmaMibhAccessEntry

hirmaMibhAccessEntry 1.3.6.1.4.1.248.2.1.2.2.1
OBJECT-TYPE    
  HirmaMibhAccessEntry  

hirmaMibhAccessCommIndex 1.3.6.1.4.1.248.2.1.2.2.1.1
Index variable, must reference a valid entry in hirmaMibhCommTable.
OBJECT-TYPE    
  INTEGER  

hirmaMibhAccessIPAddr 1.3.6.1.4.1.248.2.1.2.2.1.2
Entity's IP address. For example 0.0.0.0 means any IP address.
OBJECT-TYPE    
  IpAddress  

hirmaMibhAccessPort 1.3.6.1.4.1.248.2.1.2.2.1.3
Entity's UDP port.
OBJECT-TYPE    
  INTEGER  

hirmaMibhAccessCommunity 1.3.6.1.4.1.248.2.1.2.2.1.4
Community string referenced by hirmaMibhAccessCommIndex. This variable is supplied for convenience only.
OBJECT-TYPE    
  DisplayString  

hirmaMibhAccessAccess 1.3.6.1.4.1.248.2.1.2.2.1.5
Access rights assigned to this entity. As an extension to the SNMP standard, it is possible to reduce the access rights granted by a given SNMP community profile for any host, but it is not possible to extend access rights beyond those specified by mibhCommAccess. Note: On creation, this value defaults to the corresponding hirmaMibhCommAccess instance. Don't write to this attribute if full conformance to the standard is desired.
OBJECT-TYPE    
  INTEGER read-only(1), read-write(3)  

hirmaMibhAccessState 1.3.6.1.4.1.248.2.1.2.2.1.6
Setting a non-existent instance to enabled (1), will create a new instance in this table. Note: An entry may be temporarily suspended by setting state to disabled (2). To permanently remove an entry from the database, set state to deleted (3).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), deleted(3)  

hirmaMibhTrapTable 1.3.6.1.4.1.248.2.1.2.3
OBJECT-TYPE    
  SEQUENCE OF  
    HirmaMibhTrapEntry

hirmaMibhTrapEntry 1.3.6.1.4.1.248.2.1.2.3.1
OBJECT-TYPE    
  HirmaMibhTrapEntry  

hirmaMibhTrapCommIndex 1.3.6.1.4.1.248.2.1.2.3.1.1
Index variable, must reference a valid entry in hirmaMibhCommTable.
OBJECT-TYPE    
  INTEGER  

hirmaMibhTrapIPAddr 1.3.6.1.4.1.248.2.1.2.3.1.2
Destination IP address.
OBJECT-TYPE    
  IpAddress  

hirmaMibhTrapPort 1.3.6.1.4.1.248.2.1.2.3.1.3
Destination UDP port. This must be set to 162 by default because the management system will listen to this UDP port for traps.
OBJECT-TYPE    
  INTEGER  

hirmaMibhTrapCommunity 1.3.6.1.4.1.248.2.1.2.3.1.4
Community string referenced by hirmaMibhTrapCommIndex. This variable is supplied for convenience only.
OBJECT-TYPE    
  DisplayString  

hirmaMibhTrapState 1.3.6.1.4.1.248.2.1.2.3.1.5
Setting a non-existent instance to enabled (1), will create a new trap entry in this table. Note: An entry may be temporarily suspended by setting state to disabled (2). To permanently remove an entry from the database, set state to deleted (3).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), deleted(3)  

hirmaUserInterface 1.3.6.1.4.1.248.2.1.3
OBJECT IDENTIFIER    

hirmaLuiSystemTable 1.3.6.1.4.1.248.2.1.3.1
OBJECT IDENTIFIER    

hirmaLuiLocalIPAddr 1.3.6.1.4.1.248.2.1.3.1.1
IP address of MultiLAN Switch.
OBJECT-TYPE    
  IpAddress  

hirmaLuiGatewayIPAddr 1.3.6.1.4.1.248.2.1.3.1.2
IP address of a gateway (router) needed to reach a server.
OBJECT-TYPE    
  IpAddress  

hirmaLuiNetMask 1.3.6.1.4.1.248.2.1.3.1.3
Subnetmask of the subnet.
OBJECT-TYPE    
  IpAddress  

hirmaLuiUserTable 1.3.6.1.4.1.248.2.1.3.2
OBJECT-TYPE    
  SEQUENCE OF  
    HirmaLuiUserEntry

hirmaLuiUserEntry 1.3.6.1.4.1.248.2.1.3.2.1
OBJECT-TYPE    
  HirmaLuiUserEntry  

hirmaLuiUserID 1.3.6.1.4.1.248.2.1.3.2.1.1
Table index variable
OBJECT-TYPE    
  INTEGER  

hirmaLuiUserName 1.3.6.1.4.1.248.2.1.3.2.1.2
Userspecific Identification
OBJECT-TYPE    
  DisplayString  

hirmaLuiUserPasswd 1.3.6.1.4.1.248.2.1.3.2.1.3
password of a specific user
OBJECT-TYPE    
  DisplayString  

hirmaLuiUserCommunity 1.3.6.1.4.1.248.2.1.3.2.1.4
access-rights of the user
OBJECT-TYPE    
  DisplayString  

Defined Objects

MacAddress  
OCTET STRING SIZE(6)    

HirmaBasBridgeEventEntry  
SEQUENCE    
  INTEGER as hirmaBasBridgeMessageID  
  INTEGER as hirmaBasBridgeMessageIfIndex  
  INTEGER as hirmaBasBridgeMessage  
  TimeTicks as hirmaBasBridgeMessageTime  

HirmaBasGroupEntry  
SEQUENCE    
  INTEGER as hirmaBasGroupID  
  INTEGER as hirmaBasGroupNumOfPorts  
  DisplayString as hirmaBasGroupPortMap  
  DisplayString as hirmaBasGroupName  

HirmaBasPortEntry  
SEQUENCE    
  INTEGER as hirmaBasPortID  
  INTEGER as hirmaBasPortGroupID  
  INTEGER as hirmaBasPortLanType  
  INTEGER as hirmaBasPortType  
  INTEGER as hirmaBasPortShortDelay  
  INTEGER as hirmaBasPortLearning  
  INTEGER as hirmaBasPortFiltering  
  INTEGER as hirmaBasPortRelay  
  INTEGER as hirmaBasPortMode  
  INTEGER as hirmaBasPortCounterReset  
  DisplayString as hirmaBasPortState  

HirmaSelfTestGroupEntry  
SEQUENCE    
  INTEGER as hirmaSelfTestGroupID  
  INTEGER as hirmaSelfTestGroupDisplayTest  
  INTEGER as hirmaSelfTestGroupSQETest  

HirmaFilterTableEntry  
SEQUENCE    
  INTEGER as hirmaFilterID  
  INTEGER as hirmaFilterMode  
  DisplayString as hirmaFilterDest  
  DisplayString as hirmaFilterSrc  
  DisplayString as hirmaFilterType  
  DisplayString as hirmaFilterPortIn  
  DisplayString as hirmaFilterPortOut  

HirmaMibhCommEntry  
SEQUENCE    
  INTEGER as hirmaMibhCommIndex  
  DisplayString as hirmaMibhCommCommunity  
  INTEGER as hirmaMibhCommAccess  

HirmaMibhAccessEntry  
SEQUENCE    
  INTEGER as hirmaMibhAccessCommIndex  
  IpAddress as hirmaMibhAccessIPAddr  
  INTEGER as hirmaMibhAccessPort  
  DisplayString as hirmaMibhAccessCommunity  
  INTEGER as hirmaMibhAccessAccess  
  INTEGER as hirmaMibhAccessState  

HirmaMibhTrapEntry  
SEQUENCE    
  INTEGER as hirmaMibhTrapCommIndex  
  IpAddress as hirmaMibhTrapIPAddr  
  INTEGER as hirmaMibhTrapPort  
  DisplayString as hirmaMibhTrapCommunity  
  INTEGER as hirmaMibhTrapState  

HirmaLuiUserEntry  
SEQUENCE    
  INTEGER as hirmaLuiUserID  
  OCTET STRING as hirmaLuiUserName  
  OCTET STRING as hirmaLuiUserPasswd  
  OCTET STRING as hirmaLuiUserCommunity