
PROBERTTEXT-MIB
File:
PROBERTTEXT-MIB.mib (9621 bytes)
Imported modules
Imported symbols
Defined Objects
| apProbeRttExtMib |
1.3.6.1.4.1.2467.1.55.1 |
| The MIB module used to describe the ArrowPoint Communications Tiered Proximity Service RTT Probe Module functionality. |
| MODULE-IDENTITY |
|
|
|
| apProbeRttEnable |
1.3.6.1.4.1.2467.1.55.2 |
| This object specifies the state of the Proximity RTT Probe Module. When 'enable' the RTT PM is running on this system. When 'disable' it is not. This object is valid only if apProximityEnable is 'enable' |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disable(0), enable(1) |
|
| apProbeRttMethod0 |
1.3.6.1.4.1.2467.1.55.3 |
| This object specifies which probe method is to be tried first. This object is valid only if apProbeRttEnable is 'enable' |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
icmp(0), tcp(1) |
|
| apProbeRttMethod1 |
1.3.6.1.4.1.2467.1.55.4 |
| This object specifies which probe method is to be tried second. This object is valid only if apProbeRttEnable is 'enable' |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
icmp(0), tcp(1), none(2) |
|
| apProbeRttIcmpSamples |
1.3.6.1.4.1.2467.1.55.5 |
| This object specifies the number of ICMP probe requests to be used to calculate the RTT mean. This object is valid only if apProbeRttEnable is 'enable' |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..30 |
|
| apProbeRttIcmpInterval |
1.3.6.1.4.1.2467.1.55.6 |
| This object specifies the time delay in seconds between consecutive ICMP requests to an individual client. This object is valid only if apProbeRttEnable is 'enable' |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..10 |
|
| apProbeRttTcpPort2 |
1.3.6.1.4.1.2467.1.55.9 |
| The third TCP port number to be probed on the client's local name server. Used only if the first and second ports fail. |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..65535 |
|
| apProbeRttTcpPort3 |
1.3.6.1.4.1.2467.1.55.10 |
| The fourth TCP port number to be probed on the client's local name server. Used only if the first, second and third ports fail. |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..65535 |
|
| apProbeRttTtlProbes |
1.3.6.1.4.1.2467.1.55.12 |
| The total number of times that the PDB has probed a client to measure the RTT. This may be more than the total number of unique clients, and may be less than the actual number of ICMP or TCP requests. |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| apProbeRttICMPNoResp |
1.3.6.1.4.1.2467.1.55.16 |
| The total number of ICMP requests that were successfully sent that did not receive a reply. The ICMP requests that do not recieve a response are not used to measure RTT. |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| apProbeRttTCPNoResp |
1.3.6.1.4.1.2467.1.55.21 |
| The total number of TCP request that were successfully sent that did not recieve a usable response. The RCP requests that do not receive a response are not used to measure RTT. |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| apProbeRttTCPAvgReq |
1.3.6.1.4.1.2467.1.55.22 |
| The cumulative average number of TCP requests per minute that were successfully sent during the time period since the last reset. |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| apProbeRttPortEntry |
1.3.6.1.4.1.2467.1.55.24.1 |
| Statistics table entries for TCP ports used for probing clients. |
| OBJECT-TYPE |
|
|
|
| |
ApProbeRttPortEntry |
|
|
Defined Objects
| ApProbeRttPortEntry |
|
| SEQUENCE |
|
|
|
| |
Integer32 as apProbeRttPortIndex |
|
|
| |
Integer32 as apProbeRttPortNumber |
|
|
| |
Integer32 as apProbeRttPortRequests |
|
|
| |
Integer32 as apProbeRttPortResponses |
|
|
| |
Integer32 as apProbeRttPortFailures |
|
|