RADWARE-MIB

File: RADWARE-MIB.mib (191204 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
RFC-1215

Imported symbols

NetworkAddress IpAddress Counter
Gauge enterprises OBJECT-TYPE
DisplayString PhysAddress ipAddrEntry
TRAP-TYPE

Defined Objects

rnd 1.3.6.1.4.1.89
OBJECT IDENTIFIER    

rndMng 1.3.6.1.4.1.89.1
OBJECT IDENTIFIER    

rndSysId 1.3.6.1.4.1.89.1.1
Identification of an RND device. The device type for each integer clarifies the sysObjectID in MIB - II.
OBJECT-TYPE    
  INTEGER reb(1), ceb(2), ceblb(3), xeb(4), xeb1(5), rebsx(6), rtb(7), ltb(8), lte(9), iprouter(10), ielb(11), leb(12), openGate12(13), openGate4(14), ran(15), itlb(16), gatelinx(17), openGate2(18), ogRanTR(19), stc(20), ftc(21), armon(22), fccs1004(23), fccs1012(24), rdapter(25), ogvan(26), wanGate(27), ogRubE(28), ogRubT(29), elX(30), vGate4(31), mrt(32), ogSrubET(33), vanXS(34), lre(35), vGate2(36), serverDispatcher4(37), serverDispatcher2(38), vGate2Fast(39), serverDispatcher2Fast(40), prt(41), mlm(42), prt11(43), quickOffice(44), apollo(45), radware(62)  

rndAction 1.3.6.1.4.1.89.1.2
This variable enables the operator to perform one of the specified actions on the tables maintained by the network device. Send actions require support of proprietery File exchange protocol.
OBJECT-TYPE    
  INTEGER reset(1), sendNetworkTab(2), deleteNetworkTab(3), sendRoutingTab(4), deleteRoutingTab(5), sendLanTab(6), deleteLanTab(7), deleteArpTab(8), sendArpTab(9), deleteRouteTab(10), sendRouteTab(11), backupSPFRoutingTab(12), backupIPRoutingTab(13), backupNetworkTab(14), backupLanTab(15), backupArpTab(16), backupIPXRipTab(17), backupIPXSAPTab(18), resetCDB(19), eraseCDB(20), deleteZeroHopRoutingAllocTab(21)  

rndFileName 1.3.6.1.4.1.89.1.3
The name of the file used internally by RND for transferring tables maintained by network devices, using a prorietary File exchange protocol.
OBJECT-TYPE    
  OCTET STRING  

rndDeviceParams 1.3.6.1.4.1.89.2
OBJECT IDENTIFIER    

rndBridgeType 1.3.6.1.4.1.89.2.1
Identification of the RND bridge type.
OBJECT-TYPE    
  INTEGER reb(1), ceb(2), ceblb(3), xeb(4), xeb1(5), rebsx(6), rtb(7), ltb(8), tre(9), rtre(10), xtb(11), ete(12), rete(13), ielb(30), leb(31), openGate12(32), openGate4(33), ran(34), itlb(35), gatelinx(36), openGate2(37), ogRanTR(38), rdapter(39), ogVan(40), wanGate(41), ogRubE(42), ogRubT(43), wanGateI(44), vGate4(45), lre(46), mrt(47), vGate2(48)  

rndInactiveArpTimeOut 1.3.6.1.4.1.89.2.2
This variable defines the maximum time period that can pass between ARP requests concerning an entry in the ARP table. After this time period, the entry is deleted from the table.
OBJECT-TYPE    
  INTEGER  

rndBridgeAlarm 1.3.6.1.4.1.89.2.3
OBJECT IDENTIFIER    

rndErrorDesc 1.3.6.1.4.1.89.2.3.1
A textual description of the enterprise-specific trap sent to the Network Management Station by the RND managed device.
OBJECT-TYPE    
  DisplayString  

rndErrorSeverity 1.3.6.1.4.1.89.2.3.2
The severity type of the enterprise-specific trap sent to the Network Management Station by the RND managed device.
OBJECT-TYPE    
  INTEGER  

rndBrgVersion 1.3.6.1.4.1.89.2.4
The bridge version.
OBJECT-TYPE    
  DisplayString  

rndBrgFeatures 1.3.6.1.4.1.89.2.5
A bit mask that defines the features supported by a particular configuration of this network element: __________________________________________ | Byte 1|Byte 2 |Byte 3 | ....|Byte 20 | |87654321| | 87654321| |________|_______________________________| Byte1 : bit1: TX Block mask bit2: Source Routing Encapulation bit3: SNA/SDLC bit4: Frame Relay bit5: SNMP bit6: LAN Manager bit7: High Performance bit8: Translation Byte2 : bit1: DEC Router bit2: IPX Router bit3: IP Router Byte3 : bit1: Dial Up Backup bit2: COD bit3: FACS bit4: Load Balance bit5: Remote Configuration bit6: RIP 2 bit7: OSPF bit8: IPX RIP/SAP Filter Byte4 : bit1: BootP Server bit2: BootP Client bit3: Compression bit4: V25.bis bit5: ISDN bit6: CODv2 bit7: NSPF bit8: UDP Relay Byte5 bit1:VirtualLAN bit2:Static IP Multicast bit3:IP Redundancy bit4:CCM2 bit5:ISDN Bonding bit6:Backup Link Selection -- for the VAN/Rdapter ver 4.0 bit7:IP/IPX Forwarding -- for the WANgate ver 4.0 bit8:Improved COD Byte6 bit1: Server Disptacher bit2: ISDN_US -- for the VANSX/WANGATE ver 5.0 bit3: PPP bit4: IP Rip Filter -- for Vgate3 bit5: Zero Hop Routing -- for Vgate3 bit6: ISDN Japan Byte7 bit1: With unmanaged Switch bit2: 2 LANs bit3: OSPF Ver 2.0 bit4: FACS Ver 2.0 bit5: Multiple WEB Farm bit6: Backup Server
OBJECT-TYPE    
  OCTET STRING  

rndBrgLicense 1.3.6.1.4.1.89.2.6
This parameter is used for entering a s/w license number for a device. A separate license number is supplied for each device.
OBJECT-TYPE    
  OCTET STRING  

rndIpHost 1.3.6.1.4.1.89.2.7
OBJECT IDENTIFIER    

rndICMPTransmitionEnable 1.3.6.1.4.1.89.2.7.1
This variable controlls the ability to transmit ICMP frames
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rndCommunityTable 1.3.6.1.4.1.89.2.7.2
The community table of the agent
OBJECT-TYPE    
  SEQUENCE OF  
    RndCommunityEntry

rndCommunityEntry 1.3.6.1.4.1.89.2.7.2.1
The row definition for this table.
OBJECT-TYPE    
  RndCommunityEntry  

rndCommunityMngStationAddr 1.3.6.1.4.1.89.2.7.2.1.1
The management station that will be allowed to communicate with the agent IP address
OBJECT-TYPE    
  IpAddress  

rndCommunityString 1.3.6.1.4.1.89.2.7.2.1.2
The community string with which the management station will communicate with the agent
OBJECT-TYPE    
  DisplayString SIZE(1..20)  

rndCommunityAccess 1.3.6.1.4.1.89.2.7.2.1.3
The allowed access to this management station
OBJECT-TYPE    
  INTEGER readOnly(1), readWrite(2), super(3)  

rndCommunityTrapsEnable 1.3.6.1.4.1.89.2.7.2.1.4
Should the agent send traps to the management station
OBJECT-TYPE    
  INTEGER trapsEnable(1), trapsDisable(2)  

rndCommunityStatus 1.3.6.1.4.1.89.2.7.2.1.5
The status of this entry. If the status is invalid the community entry will be deleted
OBJECT-TYPE    
  INTEGER enable(1), invalid(2)  

rndManagedTime 1.3.6.1.4.1.89.2.8
The time will be sent in the format hhmmss
OBJECT-TYPE    
  DisplayString SIZE(6)  

rndManagedDate 1.3.6.1.4.1.89.2.9
The date will be sent in the format ddmmyyyy
OBJECT-TYPE    
  DisplayString SIZE(6..8)  

genGroup 1.3.6.1.4.1.89.2.11
OBJECT IDENTIFIER    

genGroupHWVersion 1.3.6.1.4.1.89.2.11.1
Defines the HW version of the product.
OBJECT-TYPE    
  DisplayString  

genGroupConfigurationSymbol 1.3.6.1.4.1.89.2.11.2
Defines the Configuration Symbol attached to any hardware module manufactured by LANNET. One single character A..Z defines the CS version.
OBJECT-TYPE    
  DisplayString SIZE(1)  

genGroupHWStatus 1.3.6.1.4.1.89.2.11.3
This attribute describes the status of the group hardware as detected by the sensors software.
OBJECT-TYPE    
  INTEGER ok(1), hardwareProblems(2), notSupported(255)  

rndInterface 1.3.6.1.4.1.89.4
OBJECT IDENTIFIER    

rndIfTable 1.3.6.1.4.1.89.4.1
RND-specific interface table. Each table entry includes an index, Board number, Network Address, interface status, clock indicator and interface cost.
OBJECT-TYPE    
  SEQUENCE OF  
    RndIfEntry

rndIfEntry 1.3.6.1.4.1.89.4.1.1
The row definition for this table.
OBJECT-TYPE    
  RndIfEntry  

rndIfIndex 1.3.6.1.4.1.89.4.1.1.1
Index to the RND Interface Table. The interface defined by a particular value of this index is the same interface as identified by the same value of ifIndex (MIBII).
OBJECT-TYPE    
  INTEGER  

rndIfBoardNum 1.3.6.1.4.1.89.4.1.1.2
The interface defined by this entry correspTnds to the board defined by the same value of rndSlotBoardNum in the rndSlotTab.
OBJECT-TYPE    
  INTEGER  

rndIfNetAddress 1.3.6.1.4.1.89.4.1.1.3
The IP address of the interface defined by the particular value of rndIfIndex.
OBJECT-TYPE    
  NetworkAddress  

rndIfStatus 1.3.6.1.4.1.89.4.1.1.4
The current status of the interface.
OBJECT-TYPE    
  INTEGER ok(1), okSingleBrg(2), okMultiBrg(3), connctFault(4), rxFault(5), txFault(6), channelLoopback(7), rxClockFault(8), t1Alarm(9)  

rndIfClockType 1.3.6.1.4.1.89.4.1.1.5
rndIfClockType defines the type of clock each interface uses: internal or external.
OBJECT-TYPE    
  INTEGER external(1), internal(2), t1(3), g703(4)  

rndIfBaudRate 1.3.6.1.4.1.89.4.1.1.6
Defines the baud rate of use by the interface. The valid rates are determined by the type of the media for which this baud rate is defined.
OBJECT-TYPE    
  INTEGER  

rndIfCost 1.3.6.1.4.1.89.4.1.1.7
This variable assigns a transmission cost to the interface (channel or LAN). These costs are used in Level II routing. The costs aretypically inversly proportional to the channel quality.
OBJECT-TYPE    
  INTEGER  

rndIfCompression 1.3.6.1.4.1.89.4.1.1.8
Defines whether data compression is enabled or disabled for the interface.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rndIfCompressionStatus 1.3.6.1.4.1.89.4.1.1.9
Defines the status of the compression component: not-inserted - Compression component is not in the device active - Compression is enabled and operates correctly not-active - Compression is enables but does not operate. The reason may be that there is no compression component on the device connected to this interface. disabled - Compression was disabled by management, using variable rndCompression.
OBJECT-TYPE    
  INTEGER not-inserted(1), active(2), not-active(3), disable(4)  

rndIfCompressionRate 1.3.6.1.4.1.89.4.1.1.10
Percentage of compression. This variable applies only if rndCompressionStatus is active.
OBJECT-TYPE    
  INTEGER  

rndIfLATCompression 1.3.6.1.4.1.89.4.1.1.11
Enable/Disable the LAT Compression.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rndIfCompressionType 1.3.6.1.4.1.89.4.1.1.12
This parameter indicates the type of compression option available in the device. none(1) - indicates that there is no compression option in the device lowSpeed(2) - indicates a compression option which is operational up to line speed sof 64 kbps. highSpeed(3)- indicates a compression option which is operational up to line speeds of 2 Mbps.
OBJECT-TYPE    
  INTEGER none(1), lowSpeed(2), highSpeed(3)  

rndIfFilterMode 1.3.6.1.4.1.89.4.1.1.13
This parameter indicates the type of filtering in the device.
OBJECT-TYPE    
  INTEGER destinationOnly(1), sourceAndDestination(2), none(3)  

rndIfChannelType 1.3.6.1.4.1.89.4.1.1.14
The type of the WAN channel
OBJECT-TYPE    
  INTEGER wanChannel(1), ogRanPort(2), routerToBridge(3), spsFramRelay(4), dialBackup(5), snar(6), lan(7), spsX25(8), frameRelay1490(9), frameRelay1490CAR(10), frameRelayCAR(11), ppp(12)  

rndIfBridge 1.3.6.1.4.1.89.4.1.1.15
This variable indicates whether this interface forward Layer II pakages.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rndHighPriorityIf 1.3.6.1.4.1.89.4.1.1.16
This variable indicates whether this interface will forward pakages that fit HighPriority set by the manager.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rndWanHeader 1.3.6.1.4.1.89.4.1.1.17
This variable indicates the RND WAN header type used for frames which pass through this interface. 'regular' specifies a 14 bytes header compatible with older OG versions and 'short' a 4 byte header compatible with the RND adapter product family.
OBJECT-TYPE    
  INTEGER regular(1), short(2)  

rndDuplexMode 1.3.6.1.4.1.89.4.1.1.18
This variable indicates whether this interface operates in half duplex full duplex or auto negotiation mode.
OBJECT-TYPE    
  INTEGER half(1), full(2)  

routeTableOverflow 1.3.6.1.4.1.89.5
An overflow condition has occurred in the Routing Table. The Routing Table is used for IP routing algorithm (RIP).
TRAP-TYPE    
  rndErrorDesc  
  rndErrorSeverity  

resetRequired 1.3.6.1.4.1.89.10
This trap indicates that in order to perform the last SET request, a reset operation of the router/bridge is required. This occurs when the layer 2 routing algorithm is changed between SPF and Spanning Tree. The reset can be performed manually or using the variable rndAction.
TRAP-TYPE    
  rndErrorDesc  
  rndErrorSeverity  

rndIPX 1.3.6.1.4.1.89.12
OBJECT IDENTIFIER    

endTftp 1.3.6.1.4.1.89.12
This trap indicates that in the device finished a TFTP transaction with the management station. variable rndErrorDesc and rndErrorSeverity provides the actual message text and severity respectively.
TRAP-TYPE    
  rndErrorDesc  
  rndErrorSeverity  

abortTftp 1.3.6.1.4.1.89.13
This trap indicates that in the device aborted a TFTP session with the management station. variable rndErrorDesc and rndErrorSeverity provides the actual message text and severity respectively.
TRAP-TYPE    
  rndErrorDesc  
  rndErrorSeverity  

startTftp 1.3.6.1.4.1.89.14
Informational trap indicating that the device has intiated a TFTP session. rndErrorDesc will contain the file type in question
TRAP-TYPE    
  rndErrorDesc  
  rndErrorSeverity  

rndFACS 1.3.6.1.4.1.89.16
OBJECT IDENTIFIER    

rndFACSDefaultAction 1.3.6.1.4.1.89.16.1
Used to define the default action for the device, when no FACS statements applicable to a given frame are defined.
OBJECT-TYPE    
  INTEGER block(1), forward(2), enable(3), disable(4), blockAndReport(129)  

rndFACSActTable 1.3.6.1.4.1.89.16.2
The table of FACS action.
OBJECT-TYPE    
  SEQUENCE OF  
    RndFACSActEntry

rndFACSActEntry 1.3.6.1.4.1.89.16.2.1
Each rndFACSActEntry consist of the following parameters
OBJECT-TYPE    
  RndFACSActEntry  

rndFACSActType 1.3.6.1.4.1.89.16.2.1.1
This parameter indicate on which FACS Table the FACS action will preform.
OBJECT-TYPE    
  INTEGER tx(1), rx(2), activeDB(4), tempDB(5)  

rndFACSActIfIndex 1.3.6.1.4.1.89.16.2.1.2
The interface to which this FACS entry is applicable.
OBJECT-TYPE    
  INTEGER  

rndFACSAction 1.3.6.1.4.1.89.16.2.1.3
The management station that sends a SET request for one of these actions with indexes rndFACSType and rndFACSIfIndex defines the type and the interface Id for which all FACS statements are to be erased. If no interface or no type is specified, all FACS statements for a protocol are erased.
OBJECT-TYPE    
  INTEGER none(1), eraseIP(2), eraseDECnet(3), eraseIPX(4), eraseBrg(5), replaceIP(6), replaceIPX(8), replaceBrg(9), backupIP(10), backupIPX(12), backupBrg(13)  

rndFACSTable 1.3.6.1.4.1.89.16.3
The table of FACS statment.
OBJECT-TYPE    
  SEQUENCE OF  
    RndFACSEntry

rndFACSEntry 1.3.6.1.4.1.89.16.3.1
Each FACS statment consist of the following parameters
OBJECT-TYPE    
  RndFACSEntry  

rndFACSIfIndex 1.3.6.1.4.1.89.16.3.1.1
The interface to which this FACS entry is applicable.
OBJECT-TYPE    
  INTEGER  

rndFACSProtocolType 1.3.6.1.4.1.89.16.3.1.2
This parameter define the protocol the Security Access Control is applicable.
OBJECT-TYPE    
  INTEGER ip(1), ipx(2), dec(3), bridge(4)  

rndFACSType 1.3.6.1.4.1.89.16.3.1.3
The Mode of in which this FACS statement operates.
OBJECT-TYPE    
  INTEGER tx(1), rx(2), cod(3), activeDB(4), tempDB(5)  

rndFACSIndex 1.3.6.1.4.1.89.16.3.1.4
Index to the FACS Table.
OBJECT-TYPE    
  INTEGER  

rndFACSSrcAdd 1.3.6.1.4.1.89.16.3.1.5
The size of the octet string will be according to the protocol type define in rndFACSProtocolType.
OBJECT-TYPE    
  OCTET STRING  

rndFACSSrcAddMask 1.3.6.1.4.1.89.16.3.1.6
Source-address mask .
OBJECT-TYPE    
  OCTET STRING  

rndFACSDesAdd 1.3.6.1.4.1.89.16.3.1.7
Destination-address The size of the octet string will be according to the protocol type define in rndFACSProtocolType .
OBJECT-TYPE    
  OCTET STRING  

rndFACSDesAddMask 1.3.6.1.4.1.89.16.3.1.8
Destination-address mask .
OBJECT-TYPE    
  OCTET STRING  

rndFACSOperation 1.3.6.1.4.1.89.16.3.1.9
... .
OBJECT-TYPE    
  INTEGER block(1), forward(2), permit(3), deny(4), blockZHRP(5), blockAndReport(129)  

rndFACSNetFiltering 1.3.6.1.4.1.89.16.3.1.10
... .
OBJECT-TYPE    
  INTEGER none(1), l2multicast(2), arp(3), icmp(4), ip(5), udp(6), tcp(7), decnet(8), ipx(9)  

rndFACSSoketNum 1.3.6.1.4.1.89.16.3.1.11
Port/socket number for different applications 0 is default meaning not applicable.
OBJECT-TYPE    
  INTEGER  

rndFACSMask1Id 1.3.6.1.4.1.89.16.3.1.12
Index into RND mask table FACS/COD Type) .
OBJECT-TYPE    
  INTEGER  

rndFACSMask2Id 1.3.6.1.4.1.89.16.3.1.13
Index into RND mask table FACS/COD according to the value of rndFACSType .
OBJECT-TYPE    
  INTEGER  

rndFACSStatus 1.3.6.1.4.1.89.16.3.1.14
The status of a table entry.
OBJECT-TYPE    
  INTEGER valid(1), createRequest(2), underCreation(3), invalid(4)  

rndBootP 1.3.6.1.4.1.89.24
OBJECT IDENTIFIER    

rndBootPServerAddress 1.3.6.1.4.1.89.24.1
The IPAddress of the BOOTP server. the OpenGate will act as a BootP relay if this parameter is not equale to 0.0.0.0.
OBJECT-TYPE    
  IpAddress  

rndBootPRelaySecThreshold 1.3.6.1.4.1.89.24.2
BootP requests are relayed only if their SEC field is greater or equal to the threshold value in order to allow local BootP Servers to answer first.
OBJECT-TYPE    
  INTEGER  

ipSpec 1.3.6.1.4.1.89.26
OBJECT IDENTIFIER    

rsIpAddrTable 1.3.6.1.4.1.89.26.1
This table is parralel to MIB II IpAddrTable, and is used to add/delete entries to/from that table. In addition it contains private objects.
OBJECT-TYPE    
  SEQUENCE OF  
    RsIpAddrEntry

rsIpAddrEntry 1.3.6.1.4.1.89.26.1.1
The addressing information for one of this entity's IP addresses.
OBJECT-TYPE    
  RsIpAddrEntry  

rsIpAdEntAddr 1.3.6.1.4.1.89.26.1.1.1
The IP address to which this entry's addressing information pertains.
OBJECT-TYPE    
  IpAddress  

rsIpAdEntIfIndex 1.3.6.1.4.1.89.26.1.1.2
The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  INTEGER  

rsIpAdEntNetMask 1.3.6.1.4.1.89.26.1.1.3
The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
OBJECT-TYPE    
  IpAddress  

rsIpAdEntForwardIpBroadcast 1.3.6.1.4.1.89.26.1.1.4
This variable controls forwarding of IP (sub)net-directed broadcasts destined for an attached sub(net).
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsIpAdEntReasmMaxSize 1.3.6.1.4.1.89.26.1.1.5
The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.
OBJECT-TYPE    
  INTEGER 0..65535  

rsIpAdEntStatus 1.3.6.1.4.1.89.26.1.1.6
The validity of this entry. Invalid indicates that this entry is invalid in IpAddrTable (MIB II).
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

rsIpAdEntBcastAddr 1.3.6.1.4.1.89.26.1.1.7
Indicates how the host part of ip subnet broadcast messages will be filled: 0 - host part will be filled by 0 1 - host part will be filled by 1.
OBJECT-TYPE    
  INTEGER 0..1  

rsIpAdEntVlanTag 1.3.6.1.4.1.89.26.1.1.8
The vlan Tag value that represent this ip interface this filed include both vlna tag and vlan priority
OBJECT-TYPE    
  INTEGER  

icmpSpec 1.3.6.1.4.1.89.26.2
OBJECT IDENTIFIER    

rsIcmpGenErrMsgEnable 1.3.6.1.4.1.89.26.2.1
This variable controlls the ability to generate ICMP error messages
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsIcmpRdTable 1.3.6.1.4.1.89.26.2.2
This table contains ICMP Router Discovery parameters configurated per IP interface.
OBJECT-TYPE    
  SEQUENCE OF  
    RsIcmpRdEntry

rsIcmpRdEntry 1.3.6.1.4.1.89.26.2.2.1
The ICMP parameters configurated for IP interface.
OBJECT-TYPE    
  RsIcmpRdEntry  

rsIcmpRdIpAddr 1.3.6.1.4.1.89.26.2.2.1.1
The IP address to which this entry's information pertains.
OBJECT-TYPE    
  IpAddress  

rsIcmpRdIpAdvertAddr 1.3.6.1.4.1.89.26.2.2.1.2
The IP destination address to be used for multicast Router Advertisements sent from the interface. The only permissible values are the all-systems multicast address, 224.0.0.1, or the limited-broadcast address, 255.255.255.255.
OBJECT-TYPE    
  IpAddress  

rsIcmpRdMaxAdvertInterval 1.3.6.1.4.1.89.26.2.2.1.3
The maximum time allowed between sending multicast Router Advertisements from the interface, in seconds. Must be no less than 4 seconds and no greater than 1800 seconds.
OBJECT-TYPE    
  INTEGER 4..1800  

rsIcmpRdMinAdvertInterval 1.3.6.1.4.1.89.26.2.2.1.4
The minimum time allowed between sending unsolicited multicast Router Advertisements from the interface, in seconds. Must be no less than 3 seconds and no greater than rsIcmpRdMaxAdvertInterval. Default: 0.75 * rsIcmpRdMaxAdvertInterval.
OBJECT-TYPE    
  INTEGER 3..1800  

rsIcmpRdAdvertLifetime 1.3.6.1.4.1.89.26.2.2.1.5
The maximum length of time that the advertised addresses are to be considered as valid. Must be no less than rsIcmpRdMaxAdvertInterval and no greater than 9000 seconds. Default: 3 * rsIcmpRdMaxAdvertInterval.
OBJECT-TYPE    
  INTEGER 4..9000  

rsIcmpRdAdvertise 1.3.6.1.4.1.89.26.2.2.1.6
A flag indicating whether or not the address is to be advertised.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsIcmpRdPreferenceLevel 1.3.6.1.4.1.89.26.2.2.1.7
The preferability of the address as a default router address, relative to other router addresses on the same subnet.
OBJECT-TYPE    
  INTEGER  

rsIcmpRdEntStatus 1.3.6.1.4.1.89.26.2.2.1.8
Setting of any value to this object set values of all fields to the default values.
OBJECT-TYPE    
  INTEGER  

rip2Spec 1.3.6.1.4.1.89.26.3
OBJECT IDENTIFIER    

rsRip2IfConfTable 1.3.6.1.4.1.89.26.3.1
This table is extension of rip2IfConfTable (RFC 1389 ,RIP 2)
OBJECT-TYPE    
  SEQUENCE OF  
    RsRip2IfConfEntry

rsRip2IfConfEntry 1.3.6.1.4.1.89.26.3.1.1
OBJECT-TYPE    
  RsRip2IfConfEntry  

rsRip2IfConfAddress 1.3.6.1.4.1.89.26.3.1.1.1
The IP Address of this system on the indicated subnet.
OBJECT-TYPE    
  IpAddress  

rsRip2IfConfVirtualDis 1.3.6.1.4.1.89.26.3.1.1.2
This variable defines the virtual number of hops assigned to the interface specified by rsIfIpAddrIndex. This enables fine-tuning of the RIP routing algorithm.
OBJECT-TYPE    
  INTEGER  

rsRip2IfConfAutoSend 1.3.6.1.4.1.89.26.3.1.1.3
This variable controls RIP automatic send behavior. If enabled and no routers were heard on the interface, RIP will only send default route with high metric. Otherwise RIP will send updates according to configuration.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

arpSpec 1.3.6.1.4.1.89.26.4
OBJECT IDENTIFIER    

rsArpDeleteTable 1.3.6.1.4.1.89.26.4.1
Setting this object to any not-null value has the effect of deleting all entries of the ARP table.
OBJECT-TYPE    
  INTEGER  

rsArpInactiveTimeOut 1.3.6.1.4.1.89.26.4.2
This variable defines the maximum time period (in second) that can pass between ARP requests concerning an entry in the ARP table. After this time period, the entry is deleted from the table.
OBJECT-TYPE    
  INTEGER  

rsArpProxy 1.3.6.1.4.1.89.26.4.3
When ARP Proxy is enabled, the router can respond to ARP requests for nodes located on a different sub-net, provided they are it its network table. The router responds with its own MAC address. When ARP Proxy is disabled, the router responds only to ARP requests for its own IP addresses.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

tftp 1.3.6.1.4.1.89.26.5
OBJECT IDENTIFIER    

rsTftpRetryTimeOut 1.3.6.1.4.1.89.26.5.1
General Retransmission time-out value (seconds)
OBJECT-TYPE    
  INTEGER  

rsTftpTotalTimeOut 1.3.6.1.4.1.89.26.5.2
Total Retransmission time-out value (seconds)
OBJECT-TYPE    
  INTEGER  

rsSendConfigFile 1.3.6.1.4.1.89.26.5.3
The file name include path where the Router Server will put the full configuration. The default destination address will be the sender address.
OBJECT-TYPE    
  DisplayString  

rsGetConfigFile 1.3.6.1.4.1.89.26.5.4
The file name include path where the Router Server will get the configuration. The default source address will be the sender address.
OBJECT-TYPE    
  DisplayString  

rsLoadSoftware 1.3.6.1.4.1.89.26.5.5
The file name include path where the Router Server will get the software. The source address will the sender address.
OBJECT-TYPE    
  DisplayString  

rsFileServerAddress 1.3.6.1.4.1.89.26.5.6
The IP address of the configuration / sw server.
OBJECT-TYPE    
  IpAddress  

ipRedundancy 1.3.6.1.4.1.89.26.6
OBJECT IDENTIFIER    

ipRedundAdminStatus 1.3.6.1.4.1.89.26.6.1
This variable controls the IP Redundancy method in the device. In case the value is enable, it means the ARP redundancy mechanism is running .If the value is vrrp, it means the former redundancy mechanism is disabled, and the vrrp mechanism is enabled. If the value is disable, both redundancy methods are disabled
OBJECT-TYPE    
  INTEGER enable(1), disable(2), vrrp(3)  

ipRedundOperStatus 1.3.6.1.4.1.89.26.6.2
obsolete
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

ipRedundRoutersTable 1.3.6.1.4.1.89.26.6.3
List of IP addresses backed up by this router.
OBJECT-TYPE    
  SEQUENCE OF  
    IpRedundRoutersEntry

ipRedundRoutersEntry 1.3.6.1.4.1.89.26.6.3.1
The row definition for this table.
OBJECT-TYPE    
  IpRedundRoutersEntry  

ipRedundRoutersIfAddr 1.3.6.1.4.1.89.26.6.3.1.1
The Ip address of the IP interface on which the redundancy feature is operational.
OBJECT-TYPE    
  IpAddress  

ipRedundRoutersMainRouterAddr 1.3.6.1.4.1.89.26.6.3.1.2
The Ip address of the polled main router.
OBJECT-TYPE    
  IpAddress  

ipRedundRoutersOperStatus 1.3.6.1.4.1.89.26.6.3.1.3
If active, the main router is considered inoperational and the IP interface operates as its backup.
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

ipRedundRoutersPollInterval 1.3.6.1.4.1.89.26.6.3.1.4
Polling interval for this router (in seconds). If 0 the router is not polled.
OBJECT-TYPE    
  INTEGER  

ipRedundRoutersTimeout 1.3.6.1.4.1.89.26.6.3.1.5
Interval in seconds during which the backed-up router must signal. If it does not signal, it is considered inoperational and the IP interface starts operating as backup.
OBJECT-TYPE    
  INTEGER  

ipRedundRoutersStatus 1.3.6.1.4.1.89.26.6.3.1.6
Entry status
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

ipRouteLeaking 1.3.6.1.4.1.89.26.7
OBJECT IDENTIFIER    

ipLeakStaticToRip 1.3.6.1.4.1.89.26.7.1
This parameter controls leaking (redistribution) of static routes to RIP. When enabled, all routes inserted to the IP routing table via SNMP are advertised into RIP.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipLeakStaticToOspf 1.3.6.1.4.1.89.26.7.2
This parameter controls leaking (redistribution) of static routes into OSPF. When enabled, all routes inserted to the IP routing table via SNMP are advertised into OSPF as external routes.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipLeakOspfToRip 1.3.6.1.4.1.89.26.7.3
This parameter controls leaking (redistribution) of routes from OSPF to RIP. If enabled, all routes learned via OSPF are advertised into RIP.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipLeakRipToOspf 1.3.6.1.4.1.89.26.7.4
This parameter controls leaking (redistribution) of routes from RIP to OSPF. If enabled, all routes learned via RIP are advertised into OSPF as external routes.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipLeakExtDirectToOspf 1.3.6.1.4.1.89.26.7.5
This parameter controls leaking (redistribution) into OSPF of direct routes external to OSPF, i.e. routes to local network corresponding to IP interfaces on which OSPF is disabled. When enabled, all such direct routes are advertised into OSPF as external routes.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipRipFilter 1.3.6.1.4.1.89.26.8
OBJECT IDENTIFIER    

rsIpRipFilterGlbTable 1.3.6.1.4.1.89.26.8.1
The table of RIP global filters per IP router.
OBJECT-TYPE    
  SEQUENCE OF  
    RsIpRipFilterGlbEntry

rsIpRipFilterGlbEntry 1.3.6.1.4.1.89.26.8.1.1
An entry in the RIP global filter table
OBJECT-TYPE    
  RsIpRipFilterGlbEntry  

rsIpRipFilterGlbType 1.3.6.1.4.1.89.26.8.1.1.1
Type of filter - input/output
OBJECT-TYPE    
  INTEGER input(1), output(2)  

rsIpRipFilterGlbNumber 1.3.6.1.4.1.89.26.8.1.1.2
Number of RIP filter.
OBJECT-TYPE    
  INTEGER  

rsIpRipFilterGlbStatus 1.3.6.1.4.1.89.26.8.1.1.3
The validity of this entry. Setting this value to invalid deletes the entry, and the entry may be actualy removed from the table.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2), underCreation(3)  

rsIpRipFilterGlbIpAddr 1.3.6.1.4.1.89.26.8.1.1.4
network prefix IP address, as in the forwarding table.
OBJECT-TYPE    
  IpAddress  

rsIpRipFilterGlbNetworkMaskBits 1.3.6.1.4.1.89.26.8.1.1.5
the number of bits in the IP Network mask, called network-prefix-length in Router Requirements terminology. for example: the value 16 means mask 255.255.0.0
OBJECT-TYPE    
  INTEGER  

rsIpRipFilterGlbMatchBits 1.3.6.1.4.1.89.26.8.1.1.6
the number of bits to match in the Network IP address. A value smaller than 32 defines a wildcard. for example: the value 8 means all routes whose leftmost 8 bits are equal to those of the network IP address. If this variable has a value other than 32, than rsIpRipFilterGlbNetworkMaskBits must be 0 and is ignored.
OBJECT-TYPE    
  INTEGER  

rsIpRipFilterGlbAction 1.3.6.1.4.1.89.26.8.1.1.7
Filter action - permit/deny for this network
OBJECT-TYPE    
  INTEGER deny(1), permit(2)  

rsIpRipFilterLclTable 1.3.6.1.4.1.89.26.8.2
Table of input/output RIP filters used per IP Interface.
OBJECT-TYPE    
  SEQUENCE OF  
    RsIpRipFilterLclEntry

rsIpRipFilterLclEntry 1.3.6.1.4.1.89.26.8.2.1
An entry in the Intf RIP filter table
OBJECT-TYPE    
  RsIpRipFilterLclEntry  

rsIpRipFilterLclIpIntf 1.3.6.1.4.1.89.26.8.2.1.1
The IP address identifying the RIP interface for this filter. This value corresponds to rsIpAdEntAddr.
OBJECT-TYPE    
  IpAddress  

rsIpRipFilterLclType 1.3.6.1.4.1.89.26.8.2.1.2
Type of filter - input/output
OBJECT-TYPE    
  INTEGER input(1), output(2)  

rsIpRipFilterLclNumber 1.3.6.1.4.1.89.26.8.2.1.3
Number of RIP filter for this Interface
OBJECT-TYPE    
  INTEGER  

rsIpRipFilterLclStatus 1.3.6.1.4.1.89.26.8.2.1.4
The validity of this entry. Setting this value to invalid deletes the entry, and the entry may be actualy removed from the table.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2), underCreation(3)  

rsIpRipFilterLclIpAddr 1.3.6.1.4.1.89.26.8.2.1.5
network prefix IP address, as in the forwarding table.
OBJECT-TYPE    
  IpAddress  

rsIpRipFilterLclNetworkMaskBits 1.3.6.1.4.1.89.26.8.2.1.6
the number of bits in the IP Network mask, called network-prefix-length in Router Requirements terminology. for example: the value 16 means mask 255.255.0.0
OBJECT-TYPE    
  INTEGER  

rsIpRipFilterLclMatchBits 1.3.6.1.4.1.89.26.8.2.1.7
the number of bits to match in the Network IP address. A value smaller than 32 defines a wildcard. for example: the value 8 means all routes whose leftmost 8 bits are equal to those of the network IP address. If this variable has a value other than 32, than rsIpRipFilterLclNetworkMaskBits must be 0 and is ignored.
OBJECT-TYPE    
  INTEGER  

rsIpRipFilterLclAction 1.3.6.1.4.1.89.26.8.2.1.8
Filter action - permit/deny
OBJECT-TYPE    
  INTEGER deny(1), permit(2)  

rsRipEnable 1.3.6.1.4.1.89.26.9
Enables or disables RIP.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

lreBoxAgentIP 1.3.6.1.4.1.89.26.10
OBJECT-TYPE    
  IpAddress  

virtualLan 1.3.6.1.4.1.89.27
OBJECT IDENTIFIER    

virtualLanTable 1.3.6.1.4.1.89.27.1
An entry of this table specifies an new ifIndex with a type of propVirtual(53).
OBJECT-TYPE    
  SEQUENCE OF  
    VirtualLanEntry

virtualLanEntry 1.3.6.1.4.1.89.27.1.1
A list of information for each virtual LAN.
OBJECT-TYPE    
  VirtualLanEntry  

vlIfIndex 1.3.6.1.4.1.89.27.1.1.1
An logical interface number, corresponded this VL
OBJECT-TYPE    
  INTEGER  

vlProto 1.3.6.1.4.1.89.27.1.1.2
The protocol, supported by this VL. The meanings of the values are: other: none of the following. This VL includes any protocol except the following protocols. It is a bridging VL. RS relies on a third-party router to exchange traffic between nodes on different virtual LANs of this type. IP: This is a routing VL, RS will route between nodes on different virtual LANs. IPmulticast: RS will broadcast the message to all the VL's ports. Used for video-conferencing applications. ipxRaw: This is a Routing VL, RS will route between nodes on different virtual LANs. ipxET: This is a routing VL, RS will route between nodes on different virtual LANs. ipxLLC: This is a routing VL, RS will route between nodes on different virtual LANs. ipxSNAP: This is a routing VL, RS will route between nodes on different virtual LANs. decNET: This is a bridging VL, RS relies on a third-party router to exchange traffic between nodes on different DECnet virtual LANs of this type. netBios: This is a Bridging VL, RS relies on a third-party router to exchange traffic between nodes on different NetBIOS virtual LANs of this type. appleTalk: This is a bridging VL, RS relies on a third-party router to exchange traffic between nodes on different AppleTalk virtual LANs of this type.
OBJECT-TYPE    
  INTEGER other(1), ip(2), ipmulticast(3), ipxRaw(4), ipxET(5), ipxLLC(6), ipxSNAP(7), decNET(8), decLAT(9), netBios(10), appleTalk(11), xns(12), sna(13), userDefined(14)  

vlAutoConfigEnable 1.3.6.1.4.1.89.27.1.1.3
It is used only in the case of IP. The meanings of the values are: true(1): Autolearning is used for this VL false(2): Autolearning isn't used for this VL from ports, specified in the table virtualLanAutoConfTable.
OBJECT-TYPE    
  TruthValue  

vlStatus 1.3.6.1.4.1.89.27.1.1.4
It is used to delete an entry
OBJECT-TYPE    
  RowStatus  

vlType 1.3.6.1.4.1.89.27.1.1.5
regular - ordinary type specBroadcast - for switches that support VLANs as a set of ports and only as a broadcast domain: broadcast frames do not cross VLAN's bounders, but unicast frames may be transmitted between different VLANs. Permits passing of broadcast frames between Vgate's VLANs. specArpReq - for switches that support VLANs as a set of ports and only as a broadcast domain: broadcast frames do not cross VLAN's bounders, but unicast frames may be transmitted between different VLANs. Permits passing of ARP request frames between Vgate's VLANs. specBroadcastAndUnicast - for switches that support VLANs as a set of ports but no frame crosses VLAN's bounders. Permits passing of IP/ARP request broadcast and IP unicast frames between Vgate's VLANs. specArpReqAndUnicast - for switches that support VLANs as a set of ports but no frame crosses VLAN's bounders. Permits passing of ARP request broadcast and IP unicast frames between Vgate's VLANs. This type can be used only for IP VLANs.
OBJECT-TYPE    
  INTEGER regular(1), specBroadcast(2), specArpReq(3), specBroadcastAndUnicast(4), specArpReqAndUnicast(5)  

virtualLanPortsTable 1.3.6.1.4.1.89.27.2
For each VL (a ifIndex with a type of propVirtual(53)) an entry of this table specifies a set of ports, which it contains.
OBJECT-TYPE    
  SEQUENCE OF  
    VirtualLanPortEntry

virtualLanPortEntry 1.3.6.1.4.1.89.27.2.1
A entry of this table specifies a VL and a port belonging to it
OBJECT-TYPE    
  VirtualLanPortEntry  

vLIfIndex 1.3.6.1.4.1.89.27.2.1.1
An logical interface number, corresponding to this VL
OBJECT-TYPE    
  INTEGER  

vLPortIfIndex 1.3.6.1.4.1.89.27.2.1.2
A physical port belonging to the VL specified by vlIfIndex.
OBJECT-TYPE    
  INTEGER  

vLPortType 1.3.6.1.4.1.89.27.2.1.3
static means configured by user dynamic means autoconfigured by the RS
OBJECT-TYPE    
  INTEGER static(1), dynamic(2)  

vLPortStatus 1.3.6.1.4.1.89.27.2.1.4
It is used to delete an entry
OBJECT-TYPE    
  RowStatus  

virtualLanAutoConfTable 1.3.6.1.4.1.89.27.3
This table specifies per a routing protocol a set of ports, from which RS will automatically learning VL in accordance with rules, defined by the protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    VirtualLanAutoConfEntry

virtualLanAutoConfEntry 1.3.6.1.4.1.89.27.3.1
One port, specified by vlAutoConfPortIfIndex, for which the RS will automatically learn its VL in accordance with rules, defined by the protocol specified in vlAutoConfProto.
OBJECT-TYPE    
  VirtualLanAutoConfEntry  

vlAutoConfPortIfIndex 1.3.6.1.4.1.89.27.3.1.1
Port on which the autoconfig option should be supported
OBJECT-TYPE    
  INTEGER  

vlAutoConfProto 1.3.6.1.4.1.89.27.3.1.2
Protocol for which the autoconfig option is supported for the port specified by vlAutoConfPortIfIndex
OBJECT-TYPE    
  INTEGER ip(2)  

vlAutoConfStatus 1.3.6.1.4.1.89.27.3.1.3
It is used to delete an entry
OBJECT-TYPE    
  RowStatus  

virtualLanAutoConfAgingTimeout 1.3.6.1.4.1.89.27.4
The units of this MIB object is seconds. Its value can be either 0 or in range 10..65535 .
OBJECT-TYPE    
  INTEGER  

virtualLanProtocolVlan 1.3.6.1.4.1.89.27.5
OBJECT IDENTIFIER    

virtualLanUserEtherType 1.3.6.1.4.1.89.27.5.1
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

virtualLanUserMask 1.3.6.1.4.1.89.27.5.2
OBJECT-TYPE    
  OCTET STRING SIZE(2)  

rsConf 1.3.6.1.4.1.89.28
OBJECT IDENTIFIER    

rsIfConfTable 1.3.6.1.4.1.89.28.1
This table enable the user to add interface to the RS. RS will automatically add the new interface to the interface Table
OBJECT-TYPE    
  SEQUENCE OF  
    RsIfConfEntry

rsIfConfEntry 1.3.6.1.4.1.89.28.1.1
Each entry defines a configured interface.
OBJECT-TYPE    
  RsIfConfEntry  

rsIfConfIndex 1.3.6.1.4.1.89.28.1.1.1
This variable uniquely identifies the interface. It is used as a cross reference in other system tables
OBJECT-TYPE    
  INTEGER  

rsIfConfType 1.3.6.1.4.1.89.28.1.1.2
This variable identifies the type of the specific entry in the rsIfConfTable. This field is writable only at creation time (i.e., when value of status is underCreation).
OBJECT-TYPE    
  RsIfType  

rsIfConfName 1.3.6.1.4.1.89.28.1.1.3
This variable provides a logical name to a specific entry in rsIfConfTable
OBJECT-TYPE    
  DisplayString  

rsIfConfStatus 1.3.6.1.4.1.89.28.1.1.4
The status of the ConfigEntry. The choices are those defined in SNMPv2-TC. Only: active, createAndWait, and destroy will be used. active - The conceptual row is available for use by the managed device. createAndWait - A new instance of a conceptual row is desired, but not to have it available for use by the managed device. destroy - Delete all instances associated with an existing conceptual row.
OBJECT-TYPE    
  RowStatus  

rsTunning 1.3.6.1.4.1.89.29
OBJECT IDENTIFIER    

rsHighPriority 1.3.6.1.4.1.89.29.1
This variable indicates the time interval the forwarding task inside the RS works in High Priority Mode.
OBJECT-TYPE    
  INTEGER  

rsLowPriority 1.3.6.1.4.1.89.29.2
This variable indicates the time interval the forwarding task inside the RS works in Low Priority Mode.
OBJECT-TYPE    
  INTEGER  

rsDbgLevel 1.3.6.1.4.1.89.29.3
This variable indicates the debug level the Router Server works. the range of this variable is 1..100
OBJECT-TYPE    
  INTEGER  

rsDiagnostic 1.3.6.1.4.1.89.29.4
This variable will contain some dignostic information in case on a problem ocurs in the RS functinality.
OBJECT-TYPE    
  DisplayString  

rsConfirmMessagTab 1.3.6.1.4.1.89.29.5
This variable enables the operator to confirm all the message in the event Message Table.
OBJECT-TYPE    
  INTEGER  

eventMessageTable 1.3.6.1.4.1.89.29.6
The Event Message table of the agent
OBJECT-TYPE    
  SEQUENCE OF  
    EventMessageEntry

eventMessageEntry 1.3.6.1.4.1.89.29.6.1
The row definition for this table.
OBJECT-TYPE    
  EventMessageEntry  

eventNum 1.3.6.1.4.1.89.29.6.1.1
The event number,the index of this table.
OBJECT-TYPE    
  INTEGER  

eventDesc 1.3.6.1.4.1.89.29.6.1.2
The event discription, this text will include time and severity.
OBJECT-TYPE    
  DisplayString  

reaTunning 1.3.6.1.4.1.89.29.7
OBJECT IDENTIFIER    

reaIpRemoteAgingTime 1.3.6.1.4.1.89.29.7.1
This variable specifies aging time used by the REA for remote entries in the Ip Fast Forwarding Table.
OBJECT-TYPE    
  INTEGER  

reaFftHashMaxChain 1.3.6.1.4.1.89.29.7.2
This variable specifies the maximum length of hash chains in the Fast Forwarding Tables.
OBJECT-TYPE    
  INTEGER  

reaMltcstBitOn 1.3.6.1.4.1.89.29.7.3
OBJECT-TYPE    
  INTEGER on(1), off(2)  

reaIpForwardEnable 1.3.6.1.4.1.89.29.7.4
The Platform will perform fast IP forwarding if only if this variable's value is enable.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

reaIpxForwardEnable 1.3.6.1.4.1.89.29.7.5
The Platform will perform fast IPX forwarding if only if this variable's value is enable.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

reaBridgeEnable 1.3.6.1.4.1.89.29.7.6
The Platform will perform bridging if only if this variable's value is enable.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

reaFacsEnable 1.3.6.1.4.1.89.29.7.7
The RS and Platform will perform FASC if only if this variable's value is enable.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

reaIpForwardDatagrams 1.3.6.1.4.1.89.29.7.8
The number of IP datagrams have been forwarded by the Platform.
OBJECT-TYPE    
  Counter  

reaIpInDiscards 1.3.6.1.4.1.89.29.7.9
The number of IP datagrams have been dicarded by the Platform.
OBJECT-TYPE    
  Counter  

reaIpxForwardDatagrams 1.3.6.1.4.1.89.29.7.10
The number of IPX datagrams have been forwarded by the Platform.
OBJECT-TYPE    
  Counter  

reaIpxInDiscards 1.3.6.1.4.1.89.29.7.11
The number of IP datagrams have been dicarded by the Platform.
OBJECT-TYPE    
  Counter  

reaBridgeFftTable 1.3.6.1.4.1.89.29.7.12
The Bridge Fast Forwarding Table
OBJECT-TYPE    
  SEQUENCE OF  
    ReaBridgeFftEntry

reaBridgeFftEntry 1.3.6.1.4.1.89.29.7.12.1
The row definition for this table.
OBJECT-TYPE    
  ReaBridgeFftEntry  

reaBrgFftEntryNum 1.3.6.1.4.1.89.29.7.12.1.1
OBJECT-TYPE    
  INTEGER  

reaBrgFftMacAddr 1.3.6.1.4.1.89.29.7.12.1.2
OBJECT-TYPE    
  PhysAddress  

reaBrgFftReNum 1.3.6.1.4.1.89.29.7.12.1.3
OBJECT-TYPE    
  INTEGER  

reaBrgFftPortNum 1.3.6.1.4.1.89.29.7.12.1.4
OBJECT-TYPE    
  INTEGER  

reaBrgFftFacsSrcIndex 1.3.6.1.4.1.89.29.7.12.1.5
OBJECT-TYPE    
  INTEGER  

reaBrgFftFacsDstIndex 1.3.6.1.4.1.89.29.7.12.1.6
OBJECT-TYPE    
  INTEGER  

reaBrgDiscards 1.3.6.1.4.1.89.29.7.13
The number of bridging datagrams have been discarded by the Platform.
OBJECT-TYPE    
  Counter  

reaBrgForwards 1.3.6.1.4.1.89.29.7.14
The number of bridging datagrams have been forwarded by the Platform.
OBJECT-TYPE    
  Counter  

reaIpFftTable 1.3.6.1.4.1.89.29.7.15
The IP Fast Forwarding Table
OBJECT-TYPE    
  SEQUENCE OF  
    ReaIpFftEntry

reaIpFftEntry 1.3.6.1.4.1.89.29.7.15.1
The row definition for this table.
OBJECT-TYPE    
  ReaIpFftEntry  

reaIpFftEntryNum 1.3.6.1.4.1.89.29.7.15.1.1
OBJECT-TYPE    
  INTEGER  

reaIpFftDstIpAddr 1.3.6.1.4.1.89.29.7.15.1.2
OBJECT-TYPE    
  IpAddress  

reaIpFftDstIpMask 1.3.6.1.4.1.89.29.7.15.1.3
OBJECT-TYPE    
  IpAddress  

reaIpFftRangeType 1.3.6.1.4.1.89.29.7.15.1.4
OBJECT-TYPE    
  INTEGER direct(1), remote(2)  

reaIpFftSrcMacAddr 1.3.6.1.4.1.89.29.7.15.1.5
OBJECT-TYPE    
  PhysAddress  

reaIpFftDstMacAddr 1.3.6.1.4.1.89.29.7.15.1.6
OBJECT-TYPE    
  PhysAddress  

reaIpFftReNum 1.3.6.1.4.1.89.29.7.15.1.7
OBJECT-TYPE    
  INTEGER  

reaIpFftPortNum 1.3.6.1.4.1.89.29.7.15.1.8
OBJECT-TYPE    
  INTEGER  

reaIpFftFacsSrcIndex 1.3.6.1.4.1.89.29.7.15.1.9
OBJECT-TYPE    
  INTEGER  

reaIpFftFacsDstIndex 1.3.6.1.4.1.89.29.7.15.1.10
OBJECT-TYPE    
  INTEGER  

reaIpFftApplFlags 1.3.6.1.4.1.89.29.7.15.1.11
A bit mask that defines the applications associated with this entry: __________________________________________ | Byte 1|Byte 2 |Byte 3 | ....|Byte 20 | |87654321| | 87654321| |________|_______________________________| Byte1 : bit1: Server Dispatcher Client
OBJECT-TYPE    
  OCTET STRING SIZE(4)  

reaIpxFftTable 1.3.6.1.4.1.89.29.7.16
The IPX Fast Forwarding Table
OBJECT-TYPE    
  SEQUENCE OF  
    ReaIpxFftEntry

reaIpxFftEntry 1.3.6.1.4.1.89.29.7.16.1
The row definition for this table.
OBJECT-TYPE    
  ReaIpxFftEntry  

reaIpxFftEntryNum 1.3.6.1.4.1.89.29.7.16.1.1
OBJECT-TYPE    
  INTEGER  

reaIpxFftDstNetid 1.3.6.1.4.1.89.29.7.16.1.2
OBJECT-TYPE    
  INTEGER  

reaIpxFftRangeType 1.3.6.1.4.1.89.29.7.16.1.3
OBJECT-TYPE    
  INTEGER direct(1), remote(2)  

reaIpxFftSrcMacAddr 1.3.6.1.4.1.89.29.7.16.1.4
OBJECT-TYPE    
  PhysAddress  

reaIpxFftDstMacAddr 1.3.6.1.4.1.89.29.7.16.1.5
OBJECT-TYPE    
  PhysAddress  

reaIpxFftReNum 1.3.6.1.4.1.89.29.7.16.1.6
OBJECT-TYPE    
  INTEGER  

reaIpxFftPortNum 1.3.6.1.4.1.89.29.7.16.1.7
OBJECT-TYPE    
  INTEGER  

reaIpxFftFacsSrcIndex 1.3.6.1.4.1.89.29.7.16.1.8
OBJECT-TYPE    
  INTEGER  

reaIpxFftFacsDstIndex 1.3.6.1.4.1.89.29.7.16.1.9
OBJECT-TYPE    
  INTEGER  

lreVnResposibilityTable 1.3.6.1.4.1.89.29.7.17
The Bridge Responsibility Table
OBJECT-TYPE    
  SEQUENCE OF  
    LreVnResposibilityEntry

lreVnResposibilityEntry 1.3.6.1.4.1.89.29.7.17.1
The row definition for this table.
OBJECT-TYPE    
  LreVnResposibilityEntry  

lreVnRespVn 1.3.6.1.4.1.89.29.7.17.1.1
OBJECT-TYPE    
  INTEGER  

lreVnRespStatus 1.3.6.1.4.1.89.29.7.17.1.2
OBJECT-TYPE    
  RowStatus  

reaSrcViolationEnable 1.3.6.1.4.1.89.29.7.18
The Platform will perform the Source Port Violation Procedure if only if this variable's value is enable.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

reaSrcViolationTrapEnable 1.3.6.1.4.1.89.29.7.19
The RS will send the Source Port Violation TRAP messages if only if this variable's value is enable.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

reaSrcAddrValidationEnable 1.3.6.1.4.1.89.29.7.20
The Platform will verify the source address of incoming IP datagram.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

reaRsQueueDiscards 1.3.6.1.4.1.89.29.7.21
OBJECT-TYPE    
  Counter  

reaBufFree 1.3.6.1.4.1.89.29.7.22
The number of free buffers.
OBJECT-TYPE    
  INTEGER  

lreResetDstMacBit46 1.3.6.1.4.1.89.29.7.23
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

lreQueSourceSelect 1.3.6.1.4.1.89.29.7.24
OBJECT-TYPE    
  INTEGER vNET(1), dstMac(2)  

lreResetDstMacBit47 1.3.6.1.4.1.89.29.7.25
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsMaxEntriesTuning 1.3.6.1.4.1.89.29.8
OBJECT IDENTIFIER    

rsMaxBridgeForwardingEntriesTuning 1.3.6.1.4.1.89.29.8.1
OBJECT IDENTIFIER    

rsMaxBrgFrwEntries 1.3.6.1.4.1.89.29.8.1.1
Maximal number of entries in bridge forwarding table.
OBJECT-TYPE    
  INTEGER  

rsMaxBrgFrwEntriesAfterReset 1.3.6.1.4.1.89.29.8.1.2
Future maximal number of entries in bridge forwarding table.
OBJECT-TYPE    
  INTEGER  

rsMaxIpForwardingEntriesTuning 1.3.6.1.4.1.89.29.8.2
OBJECT IDENTIFIER    

rsMaxIpFrwEntries 1.3.6.1.4.1.89.29.8.2.1
Maximal number of entries in Ip forwarding table.
OBJECT-TYPE    
  INTEGER  

rsMaxIpFrwEntriesAfterReset 1.3.6.1.4.1.89.29.8.2.2
Future maximal number of entries in Ip forwarding table.
OBJECT-TYPE    
  INTEGER  

rsMaxArpEntriesTuning 1.3.6.1.4.1.89.29.8.3
OBJECT IDENTIFIER    

rsMaxArpEntries 1.3.6.1.4.1.89.29.8.3.1
Maximal number of entries in Arp forwarding table.
OBJECT-TYPE    
  INTEGER  

rsMaxArpEntriesAfterReset 1.3.6.1.4.1.89.29.8.3.2
Future maximal number of entries in Arp forwarding table.
OBJECT-TYPE    
  INTEGER  

rsMaxIpxForwardingEntriesTuning 1.3.6.1.4.1.89.29.8.4
OBJECT IDENTIFIER    

rsMaxIpxFrwEntries 1.3.6.1.4.1.89.29.8.4.1
Maximal number of entries in Ipx forwarding table.
OBJECT-TYPE    
  INTEGER  

rsMaxIpxFrwEntriesAfterReset 1.3.6.1.4.1.89.29.8.4.2
Future maximal number of entries in Ipx forwarding table.
OBJECT-TYPE    
  INTEGER  

rsMaxIpxSapEntriesTuning 1.3.6.1.4.1.89.29.8.5
OBJECT IDENTIFIER    

rsMaxIpxSapEntries 1.3.6.1.4.1.89.29.8.5.1
Maximal number of entries in IpxSap table.
OBJECT-TYPE    
  INTEGER  

rsMaxIpxSapEntriesAfterReset 1.3.6.1.4.1.89.29.8.5.2
Future maximal number of entries in IpxSap table.
OBJECT-TYPE    
  INTEGER  

rsMaxDspClntEntriesTuning 1.3.6.1.4.1.89.29.8.6
OBJECT IDENTIFIER    

rsMaxDspClntEntries 1.3.6.1.4.1.89.29.8.6.1
Maximal number of entries in rsSdClientsTable.
OBJECT-TYPE    
  INTEGER  

rsMaxDspClntEntriesAfterReset 1.3.6.1.4.1.89.29.8.6.2
Future maximal number of entries in rsSdClientsTable.
OBJECT-TYPE    
  INTEGER  

rsMaxZeroHopRoutEntriesTuning 1.3.6.1.4.1.89.29.8.7
OBJECT IDENTIFIER    

rsMaxZhrConns 1.3.6.1.4.1.89.29.8.7.1
The current maximal number of direct Zero-hop routing connections.
OBJECT-TYPE    
  INTEGER  

rsMaxZhrConnsAfterReset 1.3.6.1.4.1.89.29.8.7.2
The future (after reset) maximal number of direct Zero-hop routing connections.
OBJECT-TYPE    
  INTEGER  

rsMaxDspFrmEntriesTuning 1.3.6.1.4.1.89.29.8.8
OBJECT IDENTIFIER    

rsMaxDspFrmEntries 1.3.6.1.4.1.89.29.8.8.1
Maximal number of entries in rsSdClientsTable.
OBJECT-TYPE    
  INTEGER  

rsMaxDspFrmEntriesAfterReset 1.3.6.1.4.1.89.29.8.8.2
Future maximal number of entries in rsSdClientsTable.
OBJECT-TYPE    
  INTEGER  

rsMaxRoutingEntriesTuning 1.3.6.1.4.1.89.29.8.9
OBJECT IDENTIFIER    

rsMaxRoutingEntries 1.3.6.1.4.1.89.29.8.9.1
Maximal number of entries in the routing table.
OBJECT-TYPE    
  INTEGER  

rsMaxRoutingEntriesAfterReset 1.3.6.1.4.1.89.29.8.9.2
Future maximal number of entries in the routing table.
OBJECT-TYPE    
  INTEGER  

rndApplications 1.3.6.1.4.1.89.35
OBJECT IDENTIFIER    

rsServerDispatcher 1.3.6.1.4.1.89.35.1
OBJECT IDENTIFIER    

rsWSDConnectionLimitReached 1.3.6.1.4.1.89.35.1.1
This warning is generated when the users connection limit of an application or a physical server is reached.
TRAP-TYPE    
  rndErrorDesc  
  rndErrorSeverity  

rsWSDReadyForShutDown 1.3.6.1.4.1.89.35.1.2
This warning is generated when all the clients sessions of an application or a physical server are finished and so, the application or server are ready to be shut down.
TRAP-TYPE    
  rndErrorDesc  
  rndErrorSeverity  

rsWSDIllegalReport 1.3.6.1.4.1.89.35.1.3
This warning is generated when an LRP message arrives with illegal information.
TRAP-TYPE    
  rndErrorDesc  
  rndErrorSeverity  

rsWSDRemoteWSDUnavailable 1.3.6.1.4.1.89.35.1.4
This warning is generated when a remote WSD is in full capacity, not in service or disabled. This server is then unavailable
TRAP-TYPE    
  rndErrorDesc  
  rndErrorSeverity  

rsWSDCapacityLimitReached 1.3.6.1.4.1.89.35.1.5
This warning is generated when WSD capacity limit is reached.
TRAP-TYPE    
  rndErrorDesc  
  rndErrorSeverity  

rsWSDStatusMonitoring 1.3.6.1.4.1.89.35.1.6
This warning is generated for unavailable SNMP parameter from a server.
TRAP-TYPE    
  rndErrorDesc  
  rndErrorSeverity  

rsWSDWrongPassword 1.3.6.1.4.1.89.35.1.7
This warning is generated when a wrong software download password is provided.
TRAP-TYPE    
  rndErrorDesc  
  rndErrorSeverity  

rsWSDInternalTableOverflow 1.3.6.1.4.1.89.35.1.8
This warning is generated when there are no more free entries in the table.
TRAP-TYPE    
  rndErrorDesc  
  rndErrorSeverity  

rsWSDServerUp 1.3.6.1.4.1.89.35.1.9
This informational trap is sent when a server correctly responds to a connectivity check for the first time.
TRAP-TYPE    
  rndErrorDesc  
  rndErrorSeverity  

rsWSDPoliciesUpdated 1.3.6.1.4.1.89.35.1.10
This informational trap is sent when the rule policies are updated.
TRAP-TYPE    
  rndErrorDesc  
  rndErrorSeverity  

rsWSDIntrusionDetected 1.3.6.1.4.1.89.35.1.11
This informational trap is sent when an intrusion is detected.
TRAP-TYPE    
  rndErrorDesc  
  rndErrorSeverity  

rsWSDServerStatTable 1.3.6.1.4.1.89.35.1.12
In this table the WSD collects statistics per servers.
OBJECT-TYPE    
  SEQUENCE OF  
    RsWSDServerStatEntry

rsWSDServerStatEntry 1.3.6.1.4.1.89.35.1.12.1
The row definition for this table.
OBJECT-TYPE    
  RsWSDServerStatEntry  

rsWSDSerStatName 1.3.6.1.4.1.89.35.1.12.1.1
This variable indicate the name assigned by the user to the serve.
OBJECT-TYPE    
  DisplayString SIZE(1..30)  

rsWSDSerStatAttUsersNum 1.3.6.1.4.1.89.35.1.12.1.2
The total number of currently active users attached to this server.
OBJECT-TYPE    
  INTEGER  

rsWSDSerStatPeakLoad 1.3.6.1.4.1.89.35.1.12.1.3
Maximal number of frames per second dispatched to server since last reset.
OBJECT-TYPE    
  INTEGER  

rsWSDSerStatFramesRate 1.3.6.1.4.1.89.35.1.12.1.4
Number of frames per second dispatched to server.
OBJECT-TYPE    
  INTEGER  

rsWSDSerStatFramesLoad 1.3.6.1.4.1.89.35.1.12.1.5
Number of frames per second dispatched to server.
OBJECT-TYPE    
  Counter  

rsWSDSerStatRecoveryTime 1.3.6.1.4.1.89.35.1.12.1.6
Number of seconds after server initialization during which ISD won't send any requests.
OBJECT-TYPE    
  INTEGER  

rsWSDSerStatWarmUpTime 1.3.6.1.4.1.89.35.1.12.1.7
Number of seconds after server recovery during which the server will get less requests than permitted by his weight and load.
OBJECT-TYPE    
  INTEGER  

rsWSDSerStatConnectionLimit 1.3.6.1.4.1.89.35.1.12.1.8
The maximal number of client sessions which can be opened on this sever.
OBJECT-TYPE    
  INTEGER  

rsWSDSerStatAdminStatus 1.3.6.1.4.1.89.35.1.12.1.9
Enable / Shutdown all the applications on this physical server.
OBJECT-TYPE    
  INTEGER enable(1), shutdown(2)  

rsWSDSerStatConnectionLimitReached 1.3.6.1.4.1.89.35.1.12.1.10
Connection limit reached flag.
OBJECT-TYPE    
  INTEGER  

rsWSDdummy2 1.3.6.1.4.1.89.35.1.12.2
Dummy variable for stopping getnext.
OBJECT-TYPE    
  INTEGER  

wsdRedundTable 1.3.6.1.4.1.89.35.1.16
List of Farm IP addresses backed up by this router.
OBJECT-TYPE    
  SEQUENCE OF  
    WsdRedundEntry

wsdRedundEntry 1.3.6.1.4.1.89.35.1.16.1
The row definition for this table.
OBJECT-TYPE    
  WsdRedundEntry  

wsdRedundFarmAddr 1.3.6.1.4.1.89.35.1.16.1.1
The Farm Virtual Ip address on which the redundancy feature operates.
OBJECT-TYPE    
  IpAddress  

wsdRedundMainWsdAddr 1.3.6.1.4.1.89.35.1.16.1.2
The Ip address of the polled main wsd.
OBJECT-TYPE    
  IpAddress  

wsdRedundOperStatus 1.3.6.1.4.1.89.35.1.16.1.3
If active, the main wsd is considered inactive and the IP interface operates as its backup.
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

wsdRedundPollInterval 1.3.6.1.4.1.89.35.1.16.1.4
Polling interval for the main wsd (in seconds). If 0 the wsd is not polled.
OBJECT-TYPE    
  INTEGER  

wsdRedundTimeout 1.3.6.1.4.1.89.35.1.16.1.5
Interval in seconds during which the backed-up wsd must signal. If it does not signal, it is considered inactive and the IP interface starts operating as backup.
OBJECT-TYPE    
  INTEGER  

wsdRedundStatus 1.3.6.1.4.1.89.35.1.16.1.6
Entry status
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

rsWSDdummy5 1.3.6.1.4.1.89.35.1.16.2
Dummy variable for stopping getnext.
OBJECT-TYPE    
  INTEGER  

rsWSDNewEntryOnSourcePort 1.3.6.1.4.1.89.35.1.19
Check source port and if different open new client entry.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsWSDSelectServerOnSourcePort 1.3.6.1.4.1.89.35.1.20
Check source port and if different select a new server.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsWSDRedundancyMode 1.3.6.1.4.1.89.35.1.21
Dose some WSD backup me.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsNsdMode 1.3.6.1.4.1.89.35.1.22
The Topology chosen for the NSD. Slow mode keeps the servers behind the NSD. Fast mode uses retargeting to connect clients directly to servers.
OBJECT-TYPE    
  INTEGER slowMode(1), fastMode(2)  

rsNsdWINSAddr 1.3.6.1.4.1.89.35.1.23
NetBIOS Name Server IP Address.
OBJECT-TYPE    
  IpAddress  

rsWSDSyslogStatus 1.3.6.1.4.1.89.35.1.26
Enable/Disable syslog message sending to remote station.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsWSDSyslogAddress 1.3.6.1.4.1.89.35.1.27
The IP Address of the syslog station.
OBJECT-TYPE    
  IpAddress  

rsWSDNTCheckTable 1.3.6.1.4.1.89.35.1.28
In this table the WSD collects NT statistics per servers.
OBJECT-TYPE    
  SEQUENCE OF  
    RsWSDNTCheckEntry

rsWSDNTCheckEntry 1.3.6.1.4.1.89.35.1.28.1
The row definition for this table.
OBJECT-TYPE    
  RsWSDNTCheckEntry  

rsWSDNTSerialNum 1.3.6.1.4.1.89.35.1.28.1.1
The serial number of the algorithm.
OBJECT-TYPE    
  INTEGER  

rsWSDNTFrequentCheckPeriod 1.3.6.1.4.1.89.35.1.28.1.2
The period for getting the frequent NT variables.
OBJECT-TYPE    
  INTEGER  

rsWSDNTOpenSessionsWeight 1.3.6.1.4.1.89.35.1.28.1.3
The weight for currently open sessions consideration.
OBJECT-TYPE    
  INTEGER  

rsWSDNTIncomingTrafficWeight 1.3.6.1.4.1.89.35.1.28.1.4
The weight for incoming traffic consideration.
OBJECT-TYPE    
  INTEGER  

rsWSDNTOutgoingTrafficWeight 1.3.6.1.4.1.89.35.1.28.1.5
The weight for outgoing traffic consideration.
OBJECT-TYPE    
  INTEGER  

rsWSDNTRegularCheckPeriod 1.3.6.1.4.1.89.35.1.28.1.6
The period for getting the regular NT variables.
OBJECT-TYPE    
  INTEGER  

rsWSDNTAvResponseWeight 1.3.6.1.4.1.89.35.1.28.1.7
The weight for average response time.
OBJECT-TYPE    
  INTEGER  

rsWSDNTUsersLimitWeight 1.3.6.1.4.1.89.35.1.28.1.8
The weight for the users limit on the server.
OBJECT-TYPE    
  INTEGER  

rsWSDNTTCPLimitWeight 1.3.6.1.4.1.89.35.1.28.1.9
The weight for the TCP connections limit on the server.
OBJECT-TYPE    
  INTEGER  

rsWSDNTRetries 1.3.6.1.4.1.89.35.1.28.1.10
The number of retries before issuing a trap.
OBJECT-TYPE    
  INTEGER  

rsWSDNTCommunity 1.3.6.1.4.1.89.35.1.28.1.11
The SNMP community name with which we access the servers.
OBJECT-TYPE    
  DisplayString SIZE(1..20)  

rsWSDdummy8 1.3.6.1.4.1.89.35.1.28.2
Dummy variable for stopping getnext.
OBJECT-TYPE    
  INTEGER  

rsWSDPrivateCheckTable 1.3.6.1.4.1.89.35.1.29
In this table the WSD collects private statistics per server.
OBJECT-TYPE    
  SEQUENCE OF  
    RsWSDPrivateCheckEntry

rsWSDPrivateCheckEntry 1.3.6.1.4.1.89.35.1.29.1
The row definition for this table.
OBJECT-TYPE    
  RsWSDPrivateCheckEntry  

rsWSDPrivateSerialNum 1.3.6.1.4.1.89.35.1.29.1.1
The serial number of the algorithm.
OBJECT-TYPE    
  INTEGER  

rsWSDPrivateSpecialCheckPeriod 1.3.6.1.4.1.89.35.1.29.1.2
The period for getting the private variables.
OBJECT-TYPE    
  INTEGER  

rsWSDPrivateExtraVar1ID 1.3.6.1.4.1.89.35.1.29.1.3
This MIB variable will be retrieved from the server.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

rsWSDPrivateExtraVar1Weight 1.3.6.1.4.1.89.35.1.29.1.4
The weight for variable number 1.
OBJECT-TYPE    
  INTEGER  

rsWSDPrivateExtraVar2ID 1.3.6.1.4.1.89.35.1.29.1.5
This MIB variable will be retrieved from the server.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

rsWSDPrivateExtraVar2Weight 1.3.6.1.4.1.89.35.1.29.1.6
The weight for variable number 2.
OBJECT-TYPE    
  INTEGER  

rsWSDPrivateRetries 1.3.6.1.4.1.89.35.1.29.1.7
The number of retries before issuing a trap.
OBJECT-TYPE    
  INTEGER  

rsWSDPrivateCommunity 1.3.6.1.4.1.89.35.1.29.1.8
The SNMP community name with which we access the servers.
OBJECT-TYPE    
  DisplayString SIZE(1..20)  

rsWSDPrivateExtraVar1Mode 1.3.6.1.4.1.89.35.1.29.1.9
Specify the type of parameter. Ascending means that the value of 100 is the best (Idle CPU percentage). Descending means that the value of 0 is the best (CPU utilization percentage)
OBJECT-TYPE    
  INTEGER ascending(1), descending(2)  

rsWSDPrivateExtraVar2Mode 1.3.6.1.4.1.89.35.1.29.1.10
Specify the type of parameter. Ascending means that the value of 100 is the best (Idle CPU percentage). Descending means that the value of 0 is the best (CPU utilization percentage)
OBJECT-TYPE    
  INTEGER ascending(1), descending(2)  

rsWSDdummy9 1.3.6.1.4.1.89.35.1.29.2
Dummy variable for stopping getnext.
OBJECT-TYPE    
  INTEGER  

rsWSDDNSResolution 1.3.6.1.4.1.89.35.1.31
Enable/Disable DNS resolution for Farm Addresses. In proximity mode, the WSD will give the best proximity address for the farm.
OBJECT-TYPE    
  INTEGER enable(1), disable(2), proximity(3)  

rsWSDUserPassword 1.3.6.1.4.1.89.35.1.33
Software download user provided password.
OBJECT-TYPE    
  DisplayString SIZE(1..8)  

rsWSDUserVersion 1.3.6.1.4.1.89.35.1.34
Software download user provided version.
OBJECT-TYPE    
  DisplayString SIZE(1..6)  

rsWSDNatStatus 1.3.6.1.4.1.89.35.1.35
Enable/Disable NAT - to hide the address of the server in messages send .
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsWSDRedundancyTakeback 1.3.6.1.4.1.89.35.1.37
Whether to take the interfaces when coming up from redundancy failure automatically or wait for manual terminal command
OBJECT-TYPE    
  INTEGER automatic(1), manual(2)  

rsMLB 1.3.6.1.4.1.89.35.1.38
OBJECT IDENTIFIER    

rsCSD 1.3.6.1.4.1.89.35.1.39
OBJECT IDENTIFIER    

rsNWSD 1.3.6.1.4.1.89.35.1.40
OBJECT IDENTIFIER    

rsWSDIfTable 1.3.6.1.4.1.89.35.1.41
RND-specific interface table. Each table entry includes an index, Board number, Network Address, interface status, clock indicator and interface cost.
OBJECT-TYPE    
  SEQUENCE OF  
    RsWSDIfEntry

rsWSDIfEntry 1.3.6.1.4.1.89.35.1.41.1
The row definition for this table.
OBJECT-TYPE    
  RsWSDIfEntry  

rsWSDIfIndex 1.3.6.1.4.1.89.35.1.41.1.1
Index to the RND Interface Table. The interface defined by a particular value of this index is the same interface as identified by the same value of ifIndex (MIBII).
OBJECT-TYPE    
  INTEGER  

rsWSDIfBoardNum 1.3.6.1.4.1.89.35.1.41.1.2
The interface defined by this entry correspTnds to the board defined by the same value of rndSlotBoardNum in the rndSlotTab.
OBJECT-TYPE    
  INTEGER  

rsWSDIfNetAddress 1.3.6.1.4.1.89.35.1.41.1.3
The IP address of the interface defined by the particular value of rsWSDIfIndex.
OBJECT-TYPE    
  NetworkAddress  

rsWSDIfStatus 1.3.6.1.4.1.89.35.1.41.1.4
The current status of the interface.
OBJECT-TYPE    
  INTEGER ok(1), okSingleBrg(2), okMultiBrg(3), connctFault(4), rxFault(5), txFault(6), channelLoopback(7), rxClockFault(8), t1Alarm(9)  

rsWSDIfClockType 1.3.6.1.4.1.89.35.1.41.1.5
rsWSDIfClockType defines the type of clock each interface uses: internal or external.
OBJECT-TYPE    
  INTEGER external(1), internal(2), t1(3), g703(4)  

rsWSDIfBaudRate 1.3.6.1.4.1.89.35.1.41.1.6
Defines the baud rate of use by the interface. The valid rates are determined by the type of the media for which this baud rate is defined.
OBJECT-TYPE    
  INTEGER  

rsWSDIfCost 1.3.6.1.4.1.89.35.1.41.1.7
This variable assigns a transmission cost to the interface (channel or LAN). These costs are used in Level II routing. The costs aretypically inversly proportional to the channel quality.
OBJECT-TYPE    
  INTEGER  

rsWSDIfCompression 1.3.6.1.4.1.89.35.1.41.1.8
Defines whether data compression is enabled or disabled for the interface.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsWSDIfCompressionStatus 1.3.6.1.4.1.89.35.1.41.1.9
Defines the status of the compression component: not-inserted - Compression component is not in the device active - Compression is enabled and operates correctly not-active - Compression is enables but does not operate. The reason may be that there is no compression component on the device connected to this interface. disabled - Compression was disabled by management, using variable rndCompression.
OBJECT-TYPE    
  INTEGER not-inserted(1), active(2), not-active(3), disable(4)  

rsWSDIfCompressionRate 1.3.6.1.4.1.89.35.1.41.1.10
Percentage of compression. This variable applies only if rndCompressionStatus is active.
OBJECT-TYPE    
  INTEGER  

rsWSDIfLATCompression 1.3.6.1.4.1.89.35.1.41.1.11
Enable/Disable the LAT Compression.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsWSDIfCompressionType 1.3.6.1.4.1.89.35.1.41.1.12
This parameter indicates the type of compression option available in the device. none(1) - indicates that there is no compression option in the device lowSpeed(2) - indicates a compression option which is operational up to line speed sof 64 kbps. highSpeed(3)- indicates a compression option which is operational up to line speeds of 2 Mbps.
OBJECT-TYPE    
  INTEGER none(1), lowSpeed(2), highSpeed(3)  

rsWSDIfFilterMode 1.3.6.1.4.1.89.35.1.41.1.13
This parameter indicates the type of filtering in the device.
OBJECT-TYPE    
  INTEGER destinationOnly(1), sourceAndDestination(2), none(3)  

rsWSDIfChannelType 1.3.6.1.4.1.89.35.1.41.1.14
The type of the WAN channel
OBJECT-TYPE    
  INTEGER wanChannel(1), ogRanPort(2), routerToBridge(3), spsFramRelay(4), dialBackup(5), snar(6), lan(7), spsX25(8), frameRelay1490(9), frameRelay1490CAR(10), frameRelayCAR(11), ppp(12)  

rsWSDIfBridge 1.3.6.1.4.1.89.35.1.41.1.15
This variable indicates whether this interface forward Layer II pakages.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsWSDHighPriorityIf 1.3.6.1.4.1.89.35.1.41.1.16
This variable indicates whether this interface will forward pakages that fit HighPriority set by the manager.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsWSDWanHeader 1.3.6.1.4.1.89.35.1.41.1.17
This variable indicates the RND WAN header type used for frames which pass through this interface. 'regular' specifies a 14 bytes header compatible with older OG versions and 'short' a 4 byte header compatible with the RND adapter product family.
OBJECT-TYPE    
  INTEGER regular(1), short(2)  

rsWSDDuplexMode 1.3.6.1.4.1.89.35.1.41.1.18
This variable indicates whether this interface operates in half duplex full duplex or auto negotiation mode.
OBJECT-TYPE    
  INTEGER half(1), full(2), auto(3)  

rsWSDClientMirrorPercentage 1.3.6.1.4.1.89.35.1.42
The percent of client entries to back up.
OBJECT-TYPE    
  INTEGER 1..100  

rsWSDMirrorStatus 1.3.6.1.4.1.89.35.1.43
Enable/Disable mirroring. This enables the allocation of the mirror tables.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsWSDMirrorProtocolMode 1.3.6.1.4.1.89.35.1.44
Enable/Disable of the mirror protocol. That is whether to send the mirror messages.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsWSDApplicationMirrorTable 1.3.6.1.4.1.89.35.1.45
Table containing the list of active mirror entries.
OBJECT-TYPE    
  SEQUENCE OF  
    RsWSDApplicationMirrorEntry

rsWSDApplicationMirrorEntry 1.3.6.1.4.1.89.35.1.45.1
The row definition for this table.
OBJECT-TYPE    
  RsWSDApplicationMirrorEntry  

rsWSDMirrorActiveAddress 1.3.6.1.4.1.89.35.1.45.1.1
The IP address of the active device.
OBJECT-TYPE    
  IpAddress  

rsWSDMirrorActiveStatus 1.3.6.1.4.1.89.35.1.45.1.2
This variable indicates the administrative status of this entry. Used to delete an entry of this table.
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

rsWSDdummy11 1.3.6.1.4.1.89.35.1.45.2
Dummy variable for stopping getnext.
OBJECT-TYPE    
  INTEGER  

rsWSDClientMirrorPollingTime 1.3.6.1.4.1.89.35.1.46
The polling time for sending the client entries.
OBJECT-TYPE    
  INTEGER  

rsPlatformIdentifier 1.3.6.1.4.1.89.35.1.47
An administratively-assigned value that identifies managed device platform.
OBJECT-TYPE    
  INTEGER vgate(1), vgfe(2), onecpu(3), onecpuh(4), boomer(5), cougar(6)  

rsConfigurationIdentifier 1.3.6.1.4.1.89.35.1.48
An administratively-assigned value that identifies managed device configuration.
OBJECT-TYPE    
  INTEGER twoPorts(1), fourPorts(2), fixed-2(3), fixed-8(4), fixed-8-2(5), fixed-16-5(6), chassis(7), fixed-7(8)  

rsSWPasswordStatus 1.3.6.1.4.1.89.35.1.49
Software download password status.
OBJECT-TYPE    
  INTEGER statusUnset(1), passwordOK(2), wrongPassword(3)  

rsWSDFlashSize 1.3.6.1.4.1.89.35.1.50
Flash Size
OBJECT-TYPE    
  INTEGER  

rsWSDDRAMSize 1.3.6.1.4.1.89.35.1.51
DRAM Size
OBJECT-TYPE    
  INTEGER  

rsWSDVLANRedundOperStatus 1.3.6.1.4.1.89.35.1.52
Enable/Disable the backup redundant device for a VLAN.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsWSDResourceUtilization 1.3.6.1.4.1.89.35.1.53
Resource Utilization of WSD. Considers network utilization and internal CPU utilization
OBJECT-TYPE    
  INTEGER 0..100  

rsWSDRSResourceUtilization 1.3.6.1.4.1.89.35.1.54
Resource Utilization of internal CPU utilization
OBJECT-TYPE    
  INTEGER 0..100  

rsWSDREResourceUtilization 1.3.6.1.4.1.89.35.1.55
Resource Utilization of network utilization
OBJECT-TYPE    
  INTEGER 0..100  

rsWSDBuildNumber 1.3.6.1.4.1.89.35.1.56
Build number
OBJECT-TYPE    
  DisplayString  

rsWSDUseOneTrap 1.3.6.1.4.1.89.35.1.57
When enabled, a single trap is used to indicate server failure. When disabled, continuous traps are sent.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsWSDSecuredComm 1.3.6.1.4.1.89.35.1.58
OBJECT IDENTIFIER    

rsWSDSCProtcolsTable 1.3.6.1.4.1.89.35.1.58.1
Table containing the list of ports/protocols for secured (encrypted) communication between the device and the management station or other device.
OBJECT-TYPE    
  SEQUENCE OF  
    RsWSDSCProtcolsEntry

rsWSDSCProtcolsEntry 1.3.6.1.4.1.89.35.1.58.1.1
The row definition for protocol table.
OBJECT-TYPE    
  RsWSDSCProtcolsEntry  

rsWSDSCProtocol 1.3.6.1.4.1.89.35.1.58.1.1.1
The protocol that should work in secured mode.
OBJECT-TYPE    
  INTEGER snmp(1), tftp(2), lrp(3), prp(4), srp(5), mirror(6)  

rsWSDSCProtocolStatus 1.3.6.1.4.1.89.35.1.58.1.1.2
The status (secured or not secured) of the protocol.
OBJECT-TYPE    
  INTEGER encrypted(1), notEncrypted(2)  

rsWSDSNMPPortsTable 1.3.6.1.4.1.89.35.1.59
The table contains all the physical ports. Each port can be set to allow/block SNMP operations to the device.
OBJECT-TYPE    
  SEQUENCE OF  
    RsWSDSNMPPortsEntry

rsWSDSNMPPortsEntry 1.3.6.1.4.1.89.35.1.59.1
Row definition for the table.
OBJECT-TYPE    
  RsWSDSNMPPortsEntry  

rsWSDSNMPPhysicalPortNumber 1.3.6.1.4.1.89.35.1.59.1.1
Physical port number.
OBJECT-TYPE    
  INTEGER  

rsWSDSNMPPhysicalPortState 1.3.6.1.4.1.89.35.1.59.1.2
enable - accept SNMP operations on the physical port. disable - ignore SNMP opertaions on the physical port.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsBWM 1.3.6.1.4.1.89.35.1.60
OBJECT IDENTIFIER    

rsWSDTelnetUserTable 1.3.6.1.4.1.89.35.1.61
A table containing the users authorized to use TELNET.
OBJECT-TYPE    
  SEQUENCE OF  
    RsWSDTelnetUserEntry

rsWSDTelnetUserEntry 1.3.6.1.4.1.89.35.1.61.1
Information about a particular Telnet user.
OBJECT-TYPE    
  RsWSDTelnetUserEntry  

rsWSDTelnetUserName 1.3.6.1.4.1.89.35.1.61.1.1
User Name.
OBJECT-TYPE    
  DisplayString SIZE(0..30)  

rsWSDTelnetUserPassword 1.3.6.1.4.1.89.35.1.61.1.2
User password.
OBJECT-TYPE    
  DisplayString SIZE(0..30)  

rsWSDTelnetUserEAddr 1.3.6.1.4.1.89.35.1.61.1.3
User email address.
OBJECT-TYPE    
  DisplayString SIZE(0..63)  

rsWSDTelnetUserSeverity 1.3.6.1.4.1.89.35.1.61.1.4
minimum failure severity to be notified by mail
OBJECT-TYPE    
  INTEGER none(1), info(2), warning(3), error(4), fatal(5)  

rsWSDTelnetUserStatus 1.3.6.1.4.1.89.35.1.61.1.5
Entry status
OBJECT-TYPE    
  RowStatus  

rsWSDTelnetUserGroup 1.3.6.1.4.1.89.35.1.61.1.6
The group to which that user belongs.
OBJECT-TYPE    
  DisplayString SIZE(0..30)  

rsWSDTelnetParams 1.3.6.1.4.1.89.35.1.62
OBJECT IDENTIFIER    

rsWSDTelnetPort 1.3.6.1.4.1.89.35.1.62.1
The Telnet Server Port.
OBJECT-TYPE    
  INTEGER  

rsWSDTelnetStatus 1.3.6.1.4.1.89.35.1.62.2
Telnet Status. Enable/Disable Telnet Terminal operation.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsSSD 1.3.6.1.4.1.89.35.1.63
OBJECT IDENTIFIER    

rsSSDvirtualLan 1.3.6.1.4.1.89.35.1.63.1
OBJECT IDENTIFIER    

rsSSDvirtualLanTable 1.3.6.1.4.1.89.35.1.63.1.1
An entry of this table specifies an new ifIndex with a type of propVirtual(53).
OBJECT-TYPE    
  SEQUENCE OF  
    RsSSDvirtualLanEntry

rsSSDvirtualLanEntry 1.3.6.1.4.1.89.35.1.63.1.1.1
A list of information for each virtual LAN.
OBJECT-TYPE    
  RsSSDvirtualLanEntry  

rsSSDvlIfIndex 1.3.6.1.4.1.89.35.1.63.1.1.1.1
An logical interface number, corresponded this VL
OBJECT-TYPE    
  INTEGER  

rsSSDvlProto 1.3.6.1.4.1.89.35.1.63.1.1.1.2
The protocol, supported by this VL. The meanings of the values are: other: none of the following. This VL includes any protocol except the following protocols. It is a bridging VL. RS relies on a third-party router to exchange traffic between nodes on different virtual LANs of this type. IP: This is a routing VL, RS will route between nodes on different virtual LANs. IPmulticast: RS will broadcast the message to all the VL's ports. Used for video-conferencing applications. ipxRaw: This is a Routing VL, RS will route between nodes on different virtual LANs. ipxET: This is a routing VL, RS will route between nodes on different virtual LANs. ipxLLC: This is a routing VL, RS will route between nodes on different virtual LANs. ipxSNAP: This is a routing VL, RS will route between nodes on different virtual LANs. decNET: This is a bridging VL, RS relies on a third-party router to exchange traffic between nodes on different DECnet virtual LANs of this type. netBios: This is a Bridging VL, RS relies on a third-party router to exchange traffic between nodes on different NetBIOS virtual LANs of this type. appleTalk: This is a bridging VL, RS relies on a third-party router to exchange traffic between nodes on different AppleTalk virtual LANs of this type. swVlan: This is a Bridging and routing VL (switch VL) , Bridging is done on the Hertz/Uhaul level , and the RS route between nodes on different virtual LANs and/or between nodes of the switch VL.
OBJECT-TYPE    
  INTEGER other(1), ip(2), ipmulticast(3), ipxRaw(4), ipxET(5), ipxLLC(6), ipxSNAP(7), decNET(8), decLAT(9), netBios(10), appleTalk(11), xns(12), sna(13), userDefined(14), swVlan(15)  

rsSSDvlAutoConfigEnable 1.3.6.1.4.1.89.35.1.63.1.1.1.3
It is used only in the case of IP. The meanings of the values are: true(1): Autolearning is used for this VL false(2): Autolearning isn't used for this VL from ports, specified in the table virtualLanAutoConfTable.
OBJECT-TYPE    
  TruthValue  

rsSSDvlStatus 1.3.6.1.4.1.89.35.1.63.1.1.1.4
It is used to delete an entry
OBJECT-TYPE    
  RowStatus  

rsSSDvlType 1.3.6.1.4.1.89.35.1.63.1.1.1.5
regular - ordinary type specBroadcast - for switches that support VLANs as a set of ports and only as a broadcast domain: broadcast frames do not cross VLAN's bounders, but unicast frames may be transmitted between different VLANs. Permits passing of broadcast frames between Vgate's VLANs. specArpReq - for switches that support VLANs as a set of ports and only as a broadcast domain: broadcast frames do not cross VLAN's bounders, but unicast frames may be transmitted between different VLANs. Permits passing of ARP request frames between Vgate's VLANs. specBroadcastAndUnicast - for switches that support VLANs as a set of ports but no frame crosses VLAN's bounders. Permits passing of IP/ARP request broadcast and IP unicast frames between Vgate's VLANs. specArpReqAndUnicast - for switches that support VLANs as a set of ports but no frame crosses VLAN's bounders. Permits passing of ARP request broadcast and IP unicast frames between Vgate's VLANs. This type can be used only for IP VLANs. specSwitch - for switches that support VLANs as a set of ports. This VLAN type is for switching when packets do not have to get to the cpu except when an IP interface defined on the VLAN. In Switch VLAN the cpu don't interfere in the bridging action this is done on the Herzts level (L2).
OBJECT-TYPE    
  INTEGER regular(1), specBroadcast(2), specArpReq(3), specBroadcastAndUnicast(4), specArpReqAndUnicast(5), specSwitch(6)  

rsSSDvlTag 1.3.6.1.4.1.89.35.1.63.1.1.1.6
A VLAN tag, used for this VLAN on tagged ports. If it's 0, then a value of (rsSSDvlIfIndex-100000+1) is used
OBJECT-TYPE    
  INTEGER  

rsSSDvlPriority 1.3.6.1.4.1.89.35.1.63.1.1.1.7
A user priority, used for this VLAN on tagged ports.
OBJECT-TYPE    
  INTEGER low(1), high(2)  

rsSSDvirtualLanPortsTable 1.3.6.1.4.1.89.35.1.63.1.2
For each VL (a ifIndex with a type of propVirtual(53)) an entry of this table specifies a set of ports, which it contains.
OBJECT-TYPE    
  SEQUENCE OF  
    RsSSDvirtualLanPortEntry

rsSSDvirtualLanPortEntry 1.3.6.1.4.1.89.35.1.63.1.2.1
A entry of this table specifies a VL and a port belonging to it
OBJECT-TYPE    
  RsSSDvirtualLanPortEntry  

rsSSDvLIfIndex 1.3.6.1.4.1.89.35.1.63.1.2.1.1
An logical interface number, corresponding to this VL
OBJECT-TYPE    
  INTEGER  

rsSSDvLPortIfIndex 1.3.6.1.4.1.89.35.1.63.1.2.1.2
A physical port belonging to the VL specified by rsSSDvlIfIndex.
OBJECT-TYPE    
  INTEGER  

rsSSDvLPortType 1.3.6.1.4.1.89.35.1.63.1.2.1.3
static means configured by user dynamic means autoconfigured by the RS
OBJECT-TYPE    
  INTEGER static(1), dynamic(2)  

rsSSDvLPortStatus 1.3.6.1.4.1.89.35.1.63.1.2.1.4
It is used to delete an entry
OBJECT-TYPE    
  RowStatus  

rsSSDvLPortTag 1.3.6.1.4.1.89.35.1.63.1.2.1.5
This variable indicate if the port is tagged or untagged
OBJECT-TYPE    
  INTEGER untag(1), tag(2)  

rsWSDThresholdWarnings 1.3.6.1.4.1.89.35.1.64
OBJECT IDENTIFIER    

rsWSDThreshTrapFloodDelay 1.3.6.1.4.1.89.35.1.64.1
This variable defines how far (in seconds) will 2 Threshold Warning Traps be spaced for the same Threshold Warning Type. Default = 0, i.e. DISABLED
OBJECT-TYPE    
  INTEGER 0..3600  

rsWSDCriticalTrapFloodDelay 1.3.6.1.4.1.89.35.1.64.2
This variable defines how far (in seconds) will 2 Critical Warning Traps be spaced (of any type). Default = 20 seconds.
OBJECT-TYPE    
  INTEGER 1..3600  

rsIDS 1.3.6.1.4.1.89.35.1.65
OBJECT IDENTIFIER    

rsWSDLicense 1.3.6.1.4.1.89.35.1.66
The new licence for the device
OBJECT-TYPE    
  DisplayString SIZE(1..80)  

rsErrMailParams 1.3.6.1.4.1.89.35.1.67
OBJECT IDENTIFIER    

rsErrMailEnable 1.3.6.1.4.1.89.35.1.67.1
Send email on errors enable
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsErrMailGateway 1.3.6.1.4.1.89.35.1.67.2
primary SMTP gateway for error mail
OBJECT-TYPE    
  IpAddress  

rsErrMailSrcAddress 1.3.6.1.4.1.89.35.1.67.3
source address to be used by device for outgoing mail
OBJECT-TYPE    
  DisplayString SIZE(1..64)  

rsWSDWebParams 1.3.6.1.4.1.89.35.1.68
OBJECT IDENTIFIER    

rsWSDWebPort 1.3.6.1.4.1.89.35.1.68.1
The Web Server Port.
OBJECT-TYPE    
  INTEGER  

rsWSDWebStatus 1.3.6.1.4.1.89.35.1.68.2
Web Status. Enable/Disable Web operation.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsWSDWebHelpLocation 1.3.6.1.4.1.89.35.1.68.3
Location of the help files directory.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

rsWSDSysParams 1.3.6.1.4.1.89.35.1.69
OBJECT IDENTIFIER    

rsWSDSysFlashSize 1.3.6.1.4.1.89.35.1.69.1
The flash size of the device in mega bytes.
OBJECT-TYPE    
  INTEGER  

rsWSDSysUpTime 1.3.6.1.4.1.89.35.1.69.2
Time since the system was last reinitialized in a convenient format.
OBJECT-TYPE    
  DisplayString  

rsWSDSysManagedTime 1.3.6.1.4.1.89.35.1.69.3
The time will be sent in the format hh:mm:ss
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

rsWSDSysManagedDate 1.3.6.1.4.1.89.35.1.69.4
The date will be sent in the format dd/mm/yyyy
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

rsWSDLicenseID 1.3.6.1.4.1.89.35.1.70
License ID used for license downgrade
OBJECT-TYPE    
  DisplayString SIZE(1..80)  

rsWSDSendFakeArp 1.3.6.1.4.1.89.35.1.71
Controls whether a backup will send a fake ARP, advertising the main box's interfaces and VIPs, when the main box returns to service.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsWSDNTP 1.3.6.1.4.1.89.35.1.72
OBJECT IDENTIFIER    

rsWSDNTPServerAddr 1.3.6.1.4.1.89.35.1.72.1
Server IP address.
OBJECT-TYPE    
  IpAddress  

rsWSDNTPInterval 1.3.6.1.4.1.89.35.1.72.2
Time update interval.
OBJECT-TYPE    
  INTEGER  

rsWSDNTPStatus 1.3.6.1.4.1.89.35.1.72.3
Enable status for NTP synchronization.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsWSDNTPTimeZone 1.3.6.1.4.1.89.35.1.72.4
Offset from Greenwich time (format hh:mm).
OBJECT-TYPE    
  DisplayString SIZE(1..6)  

rsWSDNTPPort 1.3.6.1.4.1.89.35.1.72.5
A UDP Port number.
OBJECT-TYPE    
  INTEGER  

rsStatistics 1.3.6.1.4.1.89.35.1.73
OBJECT IDENTIFIER    

rsPhysPortMirrorTable 1.3.6.1.4.1.89.35.1.74
Table containing the list of copy ports
OBJECT-TYPE    
  SEQUENCE OF  
    RsPhysPortMirrorEntry

rsPhysPortMirrorEntry 1.3.6.1.4.1.89.35.1.74.1
The row definition for physical copy port table.
OBJECT-TYPE    
  RsPhysPortMirrorEntry  

rsPhysPortMirrorSrcInf 1.3.6.1.4.1.89.35.1.74.1.1
The port under sniffing
OBJECT-TYPE    
  INTEGER  

rsPhysPortMirrorDstPort 1.3.6.1.4.1.89.35.1.74.1.2
The destination port - the target sniffer port
OBJECT-TYPE    
  INTEGER  

rsPhysPortMirrorRxTx 1.3.6.1.4.1.89.35.1.74.1.3
Copy Rx/Tx traffic to the copy port .
OBJECT-TYPE    
  INTEGER copyRxTx(1), copyRxOnly(2), copyTxOnly(3)  

rsPhysPortMirrorRxBroadCast 1.3.6.1.4.1.89.35.1.74.1.4
The copy will include broadcast/unknown or not
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsPhysPortMirrorStatus 1.3.6.1.4.1.89.35.1.74.1.5
Used to delete an entry of this table.
OBJECT-TYPE    
  RowStatus  

rsPhysPortMirrorBackupDstPort 1.3.6.1.4.1.89.35.1.74.1.6
The destination port - the target sniffer port
OBJECT-TYPE    
  INTEGER  

rsPhysPortMirrorDstStatus 1.3.6.1.4.1.89.35.1.74.1.7
The status of the dest-port according to the health check: active - the port is ok and can be used as a destination port for copy-port portDown - the port has been recognized as physically DOWN and therefore the traffic will not be copied to this port until it will be recognized as physically UP checkIDSFail - the connectivty check of the monitoring port of the IDS failed and therefore the traffic will not be copied to this port until the check will recognize differently checkIDSFailAnd PortDown - both the connectivty check on the IDS failed and the port has been recognized as physically DOWN.
OBJECT-TYPE    
  INTEGER active(1), portDown(2), checkIDSFail(3), checkIDSFailAndPortDown(4)  

rsPhysPortMirrorBackupStatus 1.3.6.1.4.1.89.35.1.74.1.8
The status of the backup-port according to the health check: Active - the port is ok and can be used as a destination port for copy-port PortDown - the port has been recognized as physically DOWN and therefore the traffic will not be copied to this port until it will be recognized as physically UP CheckIDSFail - the connectivty check of the monitoring port of the IDS failed and therefore the traffic will not be copied to this port until the check will recognize differently CheckIDSFailAnd PortDown - both the connectivty check on the IDS failed and the port has been recognized as physically DOWN None - for the case there is no defined backup port.
OBJECT-TYPE    
  INTEGER active(1), portDown(2), checkIDSFail(3), checkIDSFailAndPortDown(4), none(5)  

rsPhysPortMirrorActiveDstPort 1.3.6.1.4.1.89.35.1.74.1.9
The active dest-port at a certain time, if it is the dest-port or the backup-port or none of them.
OBJECT-TYPE    
  INTEGER dstPort(1), backupPort(2), none(3)  

rsCP 1.3.6.1.4.1.89.35.1.75
OBJECT IDENTIFIER    

rsVWSD 1.3.6.1.4.1.89.35.1.76
OBJECT IDENTIFIER    

rsVWSDDataPermissionsTable 1.3.6.1.4.1.89.35.1.76.1
Table containing the list of data items to which Farm administrators of the virtual wsd has permissions.
OBJECT-TYPE    
  SEQUENCE OF  
    RsVWSDDataPermissionsTableEntry

rsVWSDDataPermissionsTableEntry 1.3.6.1.4.1.89.35.1.76.1.1
The row definition for this table.
OBJECT-TYPE    
  RsVWSDDataPermissionsTableEntry  

rsVWSDUserGroup 1.3.6.1.4.1.89.35.1.76.1.1.1
The Group of users for whom data permission is given.
OBJECT-TYPE    
  DisplayString SIZE(1..30)  

rsVWSDDataType 1.3.6.1.4.1.89.35.1.76.1.1.2
Holds a string that identifies the table of the index by which the data filtering is done.
OBJECT-TYPE    
  OCTET STRING SIZE(1..80)  

rsVWSDDataItems 1.3.6.1.4.1.89.35.1.76.1.1.3
The Value(s) of the index column for the data item to which permission is set.
OBJECT-TYPE    
  OCTET STRING SIZE(1..80)  

rsVWSDDataStatus 1.3.6.1.4.1.89.35.1.76.1.1.4
The row status for the table
OBJECT-TYPE    
  RowStatus  

rsWSDManagementPorts 1.3.6.1.4.1.89.35.1.77
The entry indicates the functionality of the device. outOfPath implies that the device will be able to have a management port, and the rest of the ports will be used for sniffing. switch implies the regular functionality of the device (router or VLAN). promiscuous will have static port mappings for forwarding.
OBJECT-TYPE    
  INTEGER outOfPath(1), switch(2), promiscuous(3)  

rsWSDManagementPortsTable 1.3.6.1.4.1.89.35.1.78
Table containing the operation of each port..
OBJECT-TYPE    
  SEQUENCE OF  
    RsWSDManagementPortsEntry

rsWSDManagementPortsEntry 1.3.6.1.4.1.89.35.1.78.1
The row definition for this table.
OBJECT-TYPE    
  RsWSDManagementPortsEntry  

rsWSDPortIndex 1.3.6.1.4.1.89.35.1.78.1.1
The index of the physical ports.
OBJECT-TYPE    
  INTEGER  

rsWSDPortOperation 1.3.6.1.4.1.89.35.1.78.1.2
The operation of the particular port.
OBJECT-TYPE    
  INTEGER management(1), sniffer(2)  

rsCCK 1.3.6.1.4.1.89.35.1.79
OBJECT IDENTIFIER    

rsWSDSshParams 1.3.6.1.4.1.89.35.1.80
OBJECT IDENTIFIER    

rsWSDSshPort 1.3.6.1.4.1.89.35.1.80.1
The SSH Server Port.
OBJECT-TYPE    
  INTEGER  

rsWSDSshStatus 1.3.6.1.4.1.89.35.1.80.2
SSH Status. Enable/Disable SSH operation.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsWSDHttpsParams 1.3.6.1.4.1.89.35.1.81
OBJECT IDENTIFIER    

rsWSDHttpsPort 1.3.6.1.4.1.89.35.1.81.1
The Https Server Port.
OBJECT-TYPE    
  INTEGER  

rsWSDHttpsStatus 1.3.6.1.4.1.89.35.1.81.2
Https Status. Enable/Disable Https operation.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsWSDStaticForwardingTable 1.3.6.1.4.1.89.35.1.82
Table containing the static fowarding configration.
OBJECT-TYPE    
  SEQUENCE OF  
    RsWSDStaticForwardingEntry

rsWSDStaticForwardingEntry 1.3.6.1.4.1.89.35.1.82.1
The row definition for this table.
OBJECT-TYPE    
  RsWSDStaticForwardingEntry  

rsWSDStaticSourcePort 1.3.6.1.4.1.89.35.1.82.1.1
The index of the source port.
OBJECT-TYPE    
  INTEGER  

rsWSDStaticDestinationPort 1.3.6.1.4.1.89.35.1.82.1.2
The destination port.
OBJECT-TYPE    
  INTEGER  

rsWSDStaticPortOperation 1.3.6.1.4.1.89.35.1.82.1.3
The operation for the specific port. process implies that the packets will be processed (analyzed, filtered etc.) prior to being forwarded. forward implies that the packets will be forwarded.
OBJECT-TYPE    
  INTEGER process(1), forward(2)  

rsWSDStaticStatus 1.3.6.1.4.1.89.35.1.82.1.4
This variable indicates the administrative status of this entry. Used to delete an entry of this table.
OBJECT-TYPE    
  RowStatus  

rsRadiusServer 1.3.6.1.4.1.89.35.1.83
OBJECT IDENTIFIER    

rsRadiusMainServerAddr 1.3.6.1.4.1.89.35.1.83.1
The IP Address of the radius main server.
OBJECT-TYPE    
  IpAddress  

rsRadiusMainServerPort 1.3.6.1.4.1.89.35.1.83.2
The port on which the radius main server listens
OBJECT-TYPE    
  INTEGER  

rsRadiusMainServerSecret 1.3.6.1.4.1.89.35.1.83.3
The key with which the user's password is encrypted.
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rsRadiusBackupServerAddr 1.3.6.1.4.1.89.35.1.83.4
The IP Address of the backup radius server.
OBJECT-TYPE    
  IpAddress  

rsRadiusBackupServerPort 1.3.6.1.4.1.89.35.1.83.5
The port on which the radius backup server listens
OBJECT-TYPE    
  INTEGER  

rsRadiusBackupServerSecret 1.3.6.1.4.1.89.35.1.83.6
The key with which the user's password is encrypted.
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rsAuthenticationMethod 1.3.6.1.4.1.89.35.1.83.7
Radius authentication method.
OBJECT-TYPE    
  INTEGER userTable(1), radius(2), combined(3)  

rsRadiusServerTimeout 1.3.6.1.4.1.89.35.1.83.8
Number of seconds to wait for reply from the radius server before retransmitting the request.
OBJECT-TYPE    
  INTEGER 1..10  

rsRadiusServerRetries 1.3.6.1.4.1.89.35.1.83.9
Minimal number of unanswered request attempts before considering the radius server disconnected.
OBJECT-TYPE    
  INTEGER 1..5  

rsIfTable 1.3.6.1.4.1.89.35.1.84
Device physical interface table
OBJECT-TYPE    
  SEQUENCE OF  
    RsIfEntry

rsIfEntry 1.3.6.1.4.1.89.35.1.84.1
The row definition for this table
OBJECT-TYPE    
  RsIfEntry  

rsIfIndex 1.3.6.1.4.1.89.35.1.84.1.1
interface's index
OBJECT-TYPE    
  INTEGER  

rsIfSpeed 1.3.6.1.4.1.89.35.1.84.1.2
interface's speed
OBJECT-TYPE    
  INTEGER eth10(1), fe100(2), ge1000(3)  

rsIfDuplex 1.3.6.1.4.1.89.35.1.84.1.3
interface's duplex
OBJECT-TYPE    
  INTEGER half(1), full(2)  

rsIfAutoNegotiate 1.3.6.1.4.1.89.35.1.84.1.4
interface's autonegotiation status
OBJECT-TYPE    
  INTEGER on(1), off(2)  

rsIfRowStatus 1.3.6.1.4.1.89.35.1.84.1.5
interface's rowstatus
OBJECT-TYPE    
  RowStatus  

rsWSDDeviceOperationMode 1.3.6.1.4.1.89.35.1.85
Device operation mode: redirection (load balancing) or static forwarding (IDS, BWM).
OBJECT-TYPE    
  INTEGER trafficRedirection(1), staticForwarding(2)  

rsWSDVersionStatus 1.3.6.1.4.1.89.35.1.86
Indicates whether the current version is closed or still open (under development).
OBJECT-TYPE    
  INTEGER open(1), final(2)  

rndMidLevelManagement 1.3.6.1.4.1.89.35.2
OBJECT IDENTIFIER    

rndAlarmOptions 1.3.6.1.4.1.89.35.2.2
OBJECT IDENTIFIER    

rndAlarmEnabling 1.3.6.1.4.1.89.35.2.2.1
Indicates whether alarms should be issued to the high-level NMS
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

rndAlarmInterval 1.3.6.1.4.1.89.35.2.2.2
Indicates the minimal period of time which must pass after issuing an alarm before issuing the same alarm again.
OBJECT-TYPE    
  INTEGER  

rndMonitoredElementsTable 1.3.6.1.4.1.89.35.2.3
The table of monitored elements of the network
OBJECT-TYPE    
  SEQUENCE OF  
    RndMonitoredElementEntry

rndMonitoredElementEntry 1.3.6.1.4.1.89.35.2.3.1
The row definition for this table.
OBJECT-TYPE    
  RndMonitoredElementEntry  

rndMonitoredElementAddress 1.3.6.1.4.1.89.35.2.3.1.1
The IP address of the monitored element
OBJECT-TYPE    
  IpAddress  

rndMonitoredElementCommunity 1.3.6.1.4.1.89.35.2.3.1.2
The community of the monitored element
OBJECT-TYPE    
  DisplayString SIZE(1..20)  

rndMonitoredElementLabel 1.3.6.1.4.1.89.35.2.3.1.3
The label assigned by the network manager to the monitored element
OBJECT-TYPE    
  DisplayString SIZE(1..20)  

rndDefaultPollingInterval 1.3.6.1.4.1.89.35.2.3.1.4
The default period of time between two consecutive pollings of the monitored element for the value of an object instance. If no other polling interval is specifically assigned to the monitored object instance, this one will be used
OBJECT-TYPE    
  INTEGER  

rndDefaultLogFile 1.3.6.1.4.1.89.35.2.3.1.5
The default file path of the log-file which will contain the polling results for the monitored element. If no other file path is specifically assigned to the monitored object instance, this log-file will be used.
OBJECT-TYPE    
  DisplayString  

rndMonitoredElementStatus 1.3.6.1.4.1.89.35.2.3.1.6
It is used to manage the monitored elements table and indicates the current monitoring status of an element.
OBJECT-TYPE    
  RowStatus  

rndMonitoringTable 1.3.6.1.4.1.89.35.2.4
The table of monitored object instances. Each monitored object instance belongs to a monitored element previously entered in the rndMonitoredElementsTable.
OBJECT-TYPE    
  SEQUENCE OF  
    RndMonitoringEntry

rndMonitoringEntry 1.3.6.1.4.1.89.35.2.4.1
The row definition for this table.
OBJECT-TYPE    
  RndMonitoringEntry  

rndMonitoredElement 1.3.6.1.4.1.89.35.2.4.1.1
A label assigned by the network manager to a monitored element to which this monitored object instance belongs. This label must have been previously entered in an instance of rndMonitoredElementLabel
OBJECT-TYPE    
  DisplayString SIZE(1..20)  

rndMonitoredObjectInstanceLabel 1.3.6.1.4.1.89.35.2.4.1.2
The label assigned by the network manager to the monitored object instance
OBJECT-TYPE    
  DisplayString SIZE(1..20)  

rndMonitoredObjectName 1.3.6.1.4.1.89.35.2.4.1.3
The symbolic object type name of the object to which the monitored object instance belongs (as it appears the MIB module definition). In case of ambiguity the : format should be used. An instance of rndMonitoredObjectName need not be assigned any value, if the corresponding instance of rndMonitoredObjectIdentifier is assigned a value, since any one of these, together with the object instance identifier, suffices to unambigously identify the monitored object instance.
OBJECT-TYPE    
  DisplayString SIZE(0..20)  

rndMonitoredObjectIdentifier 1.3.6.1.4.1.89.35.2.4.1.4
The object identifier of the object to which the monitored object instance belongs. An instance of rndMonitoredObjectIdentifier need not be assigned any value, if the corresponding instance of rndMonitoredObjectName is assigned a value, since any one of these, together with the object instance identifier, suffices to unambigously identify the monitored object instance.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

rndMonitoredObjectInstance 1.3.6.1.4.1.89.35.2.4.1.5
The instance identifier (key) of the monitored object instance.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

rndMonitoredObjectSyntax 1.3.6.1.4.1.89.35.2.4.1.6
The syntax of the monitored object instance (i.e., the syntax of the object type of the object to which the monitored instance belongs). Need not be assigned any value if the corresponding instance of rndMonitoredObjectName has been assigned a value
OBJECT-TYPE    
  INTEGER integer(1), octet-string(2), ip-address(3), object-identifier(4)  

rndMonitoringInterval 1.3.6.1.4.1.89.35.2.4.1.7
The period of time between two consecutive retrievals of the monitored object instance's value.
OBJECT-TYPE    
  INTEGER  

rndAlarmMaxTreshold 1.3.6.1.4.1.89.35.2.4.1.8
The value of the monitored object instance, the exceeding of which will cause the generation of an alarm to the high-level management station.
OBJECT-TYPE    
  INTEGER  

rndAlarmMinTreshold 1.3.6.1.4.1.89.35.2.4.1.9
If the value of the monitored object instance falls below the value assigned to rndAlarmMinTreshold, an alarm to the high-level management station will be issued.
OBJECT-TYPE    
  INTEGER  

rndMonitoringLogfile 1.3.6.1.4.1.89.35.2.4.1.10
The entire path of the file in which the results of the monitoring of this object instance should be recorded.
OBJECT-TYPE    
  DisplayString  

rndMonitoringEntryStatus 1.3.6.1.4.1.89.35.2.4.1.11
It is used to manage the monitored object instances table and indicates the current monitoring status of an object instance.
OBJECT-TYPE    
  RowStatus  

rndMibFilesTable 1.3.6.1.4.1.89.35.2.5
The table of monitored object instances. Each monitored object instance belongs to a monitored element previously entered in the rndMonitoredElementsTable.
OBJECT-TYPE    
  SEQUENCE OF  
    RndMibFileEntry

rndMibFileEntry 1.3.6.1.4.1.89.35.2.5.1
The row definition for this table.
OBJECT-TYPE    
  RndMibFileEntry  

rndMibFileIndex 1.3.6.1.4.1.89.35.2.5.1.1
The number of the MIB file in the list MIB files supported by the Mid-Level management station. The order of the MIB files in this list must reflect the the IMPORT relation between the MIBS contained in the MIB files, i.e., if MIB A IMPORTS FROM MIB B, the file containing MIB A must have a lesser index in this table than the file containing MIB B.
OBJECT-TYPE    
  INTEGER  

rndMibFilePath 1.3.6.1.4.1.89.35.2.5.1.2
The path of the MIB file in the MIB file server.
OBJECT-TYPE    
  DisplayString  

rndMibFileRefresh 1.3.6.1.4.1.89.35.2.5.1.3
Indicates if the file should be fetched after setting this entry from the MIB file server.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

rndMibFileEntryStatus 1.3.6.1.4.1.89.35.2.5.1.4
It is used to manage the MIB files table.
OBJECT-TYPE    
  RowStatus  

rndHardwareConfiguration 1.3.6.1.4.1.89.35.2.6
Indicates whether the current SET SNMP PDU contains hardware configuration (i.e., normally read-only variables). SET of such variables in the Mid-level management station will be allowed only if this variable is included in the SNMP PDU and its value is true. Its value as returned in a GET SNMP PDU will always be false.
OBJECT-TYPE    
  TruthValue  

rndEraseSimulatedConfiguration 1.3.6.1.4.1.89.35.2.7
eraseSimulatedConfiguration instructs the MLNMS to erase all the simulated configuration from its configuration data-base (CDB). This the only accepted value for SNMP SET statements and will never be returned in SNMP GET statements. simulatedConfigurationPresent indicates that the MLNMS currently has a simulated configuration. simulatedConfigurationErased indicates that the MLNMS currently has no simulated configuration.
OBJECT-TYPE    
  INTEGER eraseSimulatedConfiguration(1), simulatedConfigurationPresent(2), simulatedConfigurationErased(3)  

rndDeleteValuesTable 1.3.6.1.4.1.89.35.2.8
This table indicates which MIB variables are row status fields which control the status of the entry to which they belong. This table also indicates which (integer!) value of these MIB variables will cause, if present in a SNMP SET PDU, the deletion of the conceptual row instance to which the SET MIB variable instance belongs.
OBJECT-TYPE    
  SEQUENCE OF  
    RndDeleteValuesEntry

rndDeleteValuesEntry 1.3.6.1.4.1.89.35.2.8.1
The row definition for the rndDeleteValuesTable table.
OBJECT-TYPE    
  RndDeleteValuesEntry  

rndRowStatusVariableName 1.3.6.1.4.1.89.35.2.8.1.1
The name of the row status field. This name may not necessarily be any name which is present in the MIBs loaded into the MLNMS station.
OBJECT-TYPE    
  DisplayString SIZE(1..80)  

rndRowStatusObjectId 1.3.6.1.4.1.89.35.2.8.1.2
The object id of the row status field. If the rndRowStatusVariableName is a name present in the MIBs loaded into the MLNMS, this MIB variable is not required, but if given, it must match the object id known to the MLNMS. The variable identified by rndRowStatusVariableName and/or rndRowStatusObjectId must be a read-write MIB variable of type INTEGER which belongs to an entry (i.e, is a child of a MIB variable of type SEQUENCE).
OBJECT-TYPE    
  OBJECT IDENTIFIER  

rndRowDeleteValue 1.3.6.1.4.1.89.35.2.8.1.3
The value of the variable identified by rndRowStatusVariableName and/or rndRowStatusObjectId, which, if present in a SNMP SET PDU, will cause the deletion of the conceptual row instance which the SET MIB variable instance belongs.
OBJECT-TYPE    
  INTEGER  

rndDeleteValueEntryStatus 1.3.6.1.4.1.89.35.2.8.1.4
It is used to delete an entry from this table.
OBJECT-TYPE    
  RowStatus  

rsIpZeroHopRouting 1.3.6.1.4.1.89.35.3
OBJECT IDENTIFIER    

rsIpZhrGeneralStatus 1.3.6.1.4.1.89.35.3.1
This parameter enables or disables the IP Zero Hop Routing feature for all IP interfaces. The IP Zero Hop Routing feature can also be enabled or disabled on each IP interface through the rsIpZhrStatusTable.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsIpZhrAgingTimeout 1.3.6.1.4.1.89.35.3.2
This parameter controls the aging time-out in seconds of direct connections which were allocated. The virtual IP address of a direct connection whose time-out has expired is eligible for allocation to a different connection.
OBJECT-TYPE    
  INTEGER  

rsIpZhrStatusTable 1.3.6.1.4.1.89.35.3.3
The administrative status of the ZHR feature per ip interface.
OBJECT-TYPE    
  SEQUENCE OF  
    RsIpZhrStatusEntry

rsIpZhrStatusEntry 1.3.6.1.4.1.89.35.3.3.1
An entry in the ZHR status table.
OBJECT-TYPE    
  RsIpZhrStatusEntry  

rsIpZhrStatusIpIntf 1.3.6.1.4.1.89.35.3.3.1.1
The Ip interface whose ZHR feature status is accessed.
OBJECT-TYPE    
  IpAddress  

rsIpZhrAdminStatus 1.3.6.1.4.1.89.35.3.3.1.2
It is used to control whether ZHR will operate on the interface.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rsIpZhrVirtAddressTable 1.3.6.1.4.1.89.35.3.4
The table of free virtual IP addresses which may be allocated to establish direct connections - Per IP Interface.
OBJECT-TYPE    
  SEQUENCE OF  
    RsIpZhrVirtAddressEntry

rsIpZhrVirtAddressEntry 1.3.6.1.4.1.89.35.3.4.1
An entry in the ZHR virtual IP addresses table
OBJECT-TYPE    
  RsIpZhrVirtAddressEntry  

rsIpZhrVirtAddressIpIntf 1.3.6.1.4.1.89.35.3.4.1.1
The Ip Interface to which the IP addresses in this entry are allocated.
OBJECT-TYPE    
  IpAddress  

rsIpZhrVirtAddressTo 1.3.6.1.4.1.89.35.3.4.1.2
The last free IP address in the block.
OBJECT-TYPE    
  IpAddress  

rsIpZhrVirtAddressFrom 1.3.6.1.4.1.89.35.3.4.1.3
The first free IP address in the block.
OBJECT-TYPE    
  IpAddress  

rsIpZhrVirtAddressStatus 1.3.6.1.4.1.89.35.3.4.1.4
It is used to manage the virtual address table. The supported actions will be active, createAndGo and destroy.
OBJECT-TYPE    
  RowStatus  

rsIpZhrConnectionsTable 1.3.6.1.4.1.89.35.3.5
Table of the currently active direct connections.
OBJECT-TYPE    
  SEQUENCE OF  
    RsIpZhrConnectionEntry

rsIpZhrConnectionEntry 1.3.6.1.4.1.89.35.3.5.1
An entry in the ZHR Connection table
OBJECT-TYPE    
  RsIpZhrConnectionEntry  

rsIpZhrConnectionIpIntf 1.3.6.1.4.1.89.35.3.5.1.1
The IP Interface for which this direct connection was established.
OBJECT-TYPE    
  IpAddress  

rsIpZhrConnectionSrcIp 1.3.6.1.4.1.89.35.3.5.1.2
The source IP Address of this direct connection.
OBJECT-TYPE    
  IpAddress  

rsIpZhrConnectionDestIp 1.3.6.1.4.1.89.35.3.5.1.3
The destination IP Address of this direct connection.
OBJECT-TYPE    
  IpAddress  

rsIpZhrConnectionVirtualIp 1.3.6.1.4.1.89.35.3.5.1.4
The virtual IP address allocated for this direct connection.
OBJECT-TYPE    
  IpAddress  

rsIpZhrConnectionType 1.3.6.1.4.1.89.35.3.5.1.5
The type of this direct connection. dynamic - established by the RS. disabled - established by the RS. The RS detected that the virtual address is already used as destination by the source BEFORE its allocation, and therefore marked this connection as 'disabled' to prevent a future allocation of this virtual address to this source. static - established by user.
OBJECT-TYPE    
  INTEGER static(1), dynamic(2), disabled(3)  

rsIpZhrConnectionAge 1.3.6.1.4.1.89.35.3.5.1.6
The age of the connection in seconds.
OBJECT-TYPE    
  INTEGER  

rsIpZhrConnectionStatus 1.3.6.1.4.1.89.35.3.5.1.7
It is used to manage the connections table. The supported actions will be active, createAndGo and destroy.
OBJECT-TYPE    
  RowStatus  

ipxRipTblOverflow 1.3.6.1.4.1.89.36
This trap indicates that in an OpenGate IPX RIP table overflow. The bound variable rndErrorDesc, rndErrorSeverity provides the actual message text and severity respectively.
TRAP-TYPE    
  rndErrorDesc  
  rndErrorSeverity  

ipxSapTblOverflow 1.3.6.1.4.1.89.37
This trap indicates that in an OpenGate IPX SAP table overflow. The bound variable rndErrorDesc, rndErrorSeverity provides the actual message text and severity respectively.
TRAP-TYPE    
  rndErrorDesc  
  rndErrorSeverity  

facsAccessVoilation 1.3.6.1.4.1.89.49
This trap indicates that message that fits FACS statenebt with operation blockAndReport was forward to the interface.The bound variable rndErrorDesc, rndErrorSeverity(== info ) and interface Number.
TRAP-TYPE    
  rndErrorDesc  
  rndErrorSeverity  

autoConfigurationCompleted 1.3.6.1.4.1.89.50
This trap indicates that auto comfiguration completetd succssefully. The bound variable rndErrorDesc, rndErrorSeverity(== info )
TRAP-TYPE    
  rndErrorDesc  
  rndErrorSeverity  

forwardingTabOverflow 1.3.6.1.4.1.89.51
This trap indicates that an overflow condition has occurred in the layer II Forward Table. The bound variable rndErrorDesc, rndErrorSeverity(== warning )
TRAP-TYPE    
  rndErrorDesc  
  rndErrorSeverity  

errorsDuringInit 1.3.6.1.4.1.89.61
TRAP-TYPE    
  rndErrorDesc  
  rndErrorSeverity  

vlanDynPortAdded 1.3.6.1.4.1.89.66
TRAP-TYPE    
  rndErrorDesc  
  rndErrorSeverity  

vlanDynPortRemoved 1.3.6.1.4.1.89.67
TRAP-TYPE    
  rndErrorDesc  
  rndErrorSeverity  

rsSDclientsTableOverflow 1.3.6.1.4.1.89.68
This warning is generated when an overflow occurs in the clients table.
TRAP-TYPE    
  rndErrorDesc  
  rndErrorSeverity  

rsSDinactiveServer 1.3.6.1.4.1.89.69
This warning is generated when a server does not respond to the dispatchers polling and is thought to be inactive.
TRAP-TYPE    
  rndErrorDesc  
  rndErrorSeverity  

rsIpZhrConnectionsTableOverflow 1.3.6.1.4.1.89.70
The Zero Hop Routing connections Table has been overflown.
TRAP-TYPE    
  rndErrorDesc  
  rndErrorSeverity  

rsIpZhrReqStaticConnNotAccepted 1.3.6.1.4.1.89.71
The requested static connection was not accepted because there is no available IP virtual address to allocate to it.
TRAP-TYPE    
  rndErrorDesc  
  rndErrorSeverity  

rsIpZhrVirtualIpAsSource 1.3.6.1.4.1.89.72
The virtual IP address appeared as a source IP. All the connections using it will be deleted and it will not be further allocated to new connections.
TRAP-TYPE    
  rndErrorDesc  
  rndErrorSeverity  

rsIpZhrNotAllocVirtualIp 1.3.6.1.4.1.89.73
The source IP address sent an ARP specifying a virtual IP which was not allocated for this source. This virtual IP will not be allocated to connections of this specific source IP.
TRAP-TYPE    
  rndErrorDesc  
  rndErrorSeverity  

rsSnmpSetRequestInSpecialCfgState 1.3.6.1.4.1.89.74
An incoming SNMP SET request was rejected because no such requests (except action requests) are accepted after start of new configuration reception or during sending the current configuration to an NMS.
TRAP-TYPE    
  rndErrorDesc  
  rndErrorSeverity  

rsWSDRedundancySwitch 1.3.6.1.4.1.89.141
Whenever main server fails and backup takes over or server comes up after failure a trap of this type is issued.
TRAP-TYPE    
  rndErrorDesc  
  rndErrorSeverity  

Defined Objects

TruthValue  
INTEGER true(1), false(2)    

RowStatus  
INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)    

NetNumber  
OCTET STRING SIZE(4)    

RndCommunityEntry  
SEQUENCE    
  IpAddress as rndCommunityMngStationAddr  
  DisplayString as rndCommunityString  
  INTEGER as rndCommunityAccess  
  INTEGER as rndCommunityTrapsEnable  
  INTEGER as rndCommunityStatus  

RndIfEntry  
SEQUENCE    
  INTEGER as rndIfIndex  
  INTEGER as rndIfBoardNum  
  NetworkAddress as rndIfNetAddress  
  INTEGER as rndIfStatus  
  INTEGER as rndIfClockType  
  INTEGER as rndIfBaudRate  
  INTEGER as rndIfCost  
  INTEGER as rndIfCompression  
  INTEGER as rndIfCompressionStatus  
  INTEGER as rndIfCompressionRate  
  INTEGER as rndIfLATCompression  
  INTEGER as rndIfCompressionType  
  INTEGER as rndIfFilterMode  
  INTEGER as rndIfChannelType  
  INTEGER as rndIfBridge  
  INTEGER as rndHighPriorityIf  
  INTEGER as rndWanHeader  
  INTEGER as rndDuplexMode  

RndFACSActEntry  
SEQUENCE    
  INTEGER as rndFACSActType  
  INTEGER as rndFACSActIfIndex  
  INTEGER as rndFACSAction  

RndFACSEntry  
SEQUENCE    
  INTEGER as rndFACSIfIndex  
  INTEGER as rndFACSProtocolType  
  INTEGER as rndFACSType  
  INTEGER as rndFACSIndex  
  OCTET STRING as rndFACSSrcAdd  
  OCTET STRING as rndFACSSrcAddMask  
  OCTET STRING as rndFACSDesAdd  
  OCTET STRING as rndFACSDesAddMask  
  INTEGER as rndFACSOperation  
  INTEGER as rndFACSNetFiltering  
  INTEGER as rndFACSSoketNum  
  INTEGER as rndFACSMask1Id  
  INTEGER as rndFACSMask2Id  
  INTEGER as rndFACSStatus  

RsIpAddrEntry  
SEQUENCE    
  IpAddress as rsIpAdEntAddr  
  INTEGER as rsIpAdEntIfIndex  
  IpAddress as rsIpAdEntNetMask  
  INTEGER as rsIpAdEntForwardIpBroadcast  
  INTEGER as rsIpAdEntReasmMaxSize  
  INTEGER as rsIpAdEntStatus  
  INTEGER as rsIpAdEntBcastAddr  
  INTEGER as rsIpAdEntVlanTag  

RsIcmpRdEntry  
SEQUENCE    
  IpAddress as rsIcmpRdIpAddr  
  IpAddress as rsIcmpRdIpAdvertAddr  
  INTEGER as rsIcmpRdMaxAdvertInterval  
  INTEGER as rsIcmpRdMinAdvertInterval  
  INTEGER as rsIcmpRdAdvertLifetime  
  INTEGER as rsIcmpRdAdvertise  
  INTEGER as rsIcmpRdPreferenceLevel  
  INTEGER as rsIcmpRdEntStatus  

RsRip2IfConfEntry  
SEQUENCE    
  IpAddress as rsRip2IfConfAddress  
  INTEGER as rsRip2IfConfVirtualDis  
  INTEGER as rsRip2IfConfAutoSend  

IpRedundRoutersEntry  
SEQUENCE    
  IpAddress as ipRedundRoutersIfAddr  
  IpAddress as ipRedundRoutersMainRouterAddr  
  INTEGER as ipRedundRoutersOperStatus  
  INTEGER as ipRedundRoutersPollInterval  
  INTEGER as ipRedundRoutersTimeout  
  INTEGER as ipRedundRoutersStatus  

RsIpRipFilterGlbEntry  
SEQUENCE    
  INTEGER as rsIpRipFilterGlbType  
  INTEGER as rsIpRipFilterGlbNumber  
  INTEGER as rsIpRipFilterGlbStatus  
  IpAddress as rsIpRipFilterGlbIpAddr  
  INTEGER as rsIpRipFilterGlbNetworkMaskBits  
  INTEGER as rsIpRipFilterGlbMatchBits  
  INTEGER as rsIpRipFilterGlbAction  

RsIpRipFilterLclEntry  
SEQUENCE    
  IpAddress as rsIpRipFilterLclIpIntf  
  INTEGER as rsIpRipFilterLclType  
  INTEGER as rsIpRipFilterLclNumber  
  INTEGER as rsIpRipFilterLclStatus  
  IpAddress as rsIpRipFilterLclIpAddr  
  INTEGER as rsIpRipFilterLclNetworkMaskBits  
  INTEGER as rsIpRipFilterLclMatchBits  
  INTEGER as rsIpRipFilterLclAction  

VirtualLanEntry  
SEQUENCE    
  INTEGER as vlIfIndex  
  INTEGER as vlProto  
  TruthValue as vlAutoConfigEnable  
  RowStatus as vlStatus  
  INTEGER as vlType  

VirtualLanPortEntry  
SEQUENCE    
  INTEGER as vLIfIndex  
  INTEGER as vLPortIfIndex  
  INTEGER as vLPortType  
  RowStatus as vLPortStatus  

VirtualLanAutoConfEntry  
SEQUENCE    
  INTEGER as vlAutoConfProto  
  INTEGER as vlAutoConfPortIfIndex  
  RowStatus as vlAutoConfStatus  

RsIfType  
INTEGER ppp(23), frameRelay(32), virtualNet(500), rndWan(1000), cod(1001), backup(1002), fr1490(1003), b1isdn(1010), b2isdn(1011), unknown(1100)    

RsIfConfEntry  
SEQUENCE    
  INTEGER as rsIfConfIndex  
  RsIfType as rsIfConfType  
  DisplayString as rsIfConfName  
  RowStatus as rsIfConfStatus  

EventMessageEntry  
SEQUENCE    
  INTEGER as eventNum  
  DisplayString as eventDesc  

ReaBridgeFftEntry  
SEQUENCE    
  INTEGER as reaBrgFftEntryNum  
  PhysAddress as reaBrgFftMacAddr  
  INTEGER as reaBrgFftReNum  
  INTEGER as reaBrgFftPortNum  
  INTEGER as reaBrgFftFacsSrcIndex  
  INTEGER as reaBrgFftFacsDstIndex  

ReaIpFftEntry  
SEQUENCE    
  INTEGER as reaIpFftEntryNum  
  IpAddress as reaIpFftDstIpAddr  
  IpAddress as reaIpFftDstIpMask  
  INTEGER as reaIpFftRangeType  
  PhysAddress as reaIpFftSrcMacAddr  
  PhysAddress as reaIpFftDstMacAddr  
  INTEGER as reaIpFftReNum  
  INTEGER as reaIpFftPortNum  
  INTEGER as reaIpFftFacsSrcIndex  
  INTEGER as reaIpFftFacsDstIndex  
  OCTET STRING as reaIpFftApplFlags  

ReaIpxFftEntry  
SEQUENCE    
  INTEGER as reaIpxFftEntryNum  
  INTEGER as reaIpxFftDstNetid  
  INTEGER as reaIpxFftRangeType  
  PhysAddress as reaIpxFftSrcMacAddr  
  PhysAddress as reaIpxFftDstMacAddr  
  INTEGER as reaIpxFftReNum  
  INTEGER as reaIpxFftPortNum  
  INTEGER as reaIpxFftFacsSrcIndex  
  INTEGER as reaIpxFftFacsDstIndex  

LreVnResposibilityEntry  
SEQUENCE    
  INTEGER as lreVnRespVn  
  RowStatus as lreVnRespStatus  

RndMonitoredElementEntry  
SEQUENCE    
  IpAddress as rndMonitoredElementAddress  
  DisplayString as rndMonitoredElementCommunity SIZE(1..20)  
  DisplayString as rndMonitoredElementLabel SIZE(1..20)  
  INTEGER as rndDefaultPollingInterval  
  DisplayString as rndDefaultLogFile  
  RowStatus as rndMonitoredElementStatus  

RndMonitoringEntry  
SEQUENCE    
  DisplayString as rndMonitoredElement SIZE(1..20)  
  DisplayString as rndMonitoredObjectInstanceLabel  
  DisplayString as rndMonitoredObjectName  
  OBJECT IDENTIFIER as rndMonitoredObjectIdentifier  
  OBJECT IDENTIFIER as rndMonitoredObjectInstance  
  INTEGER as rndMonitoredObjectSyntax  
  INTEGER as rndMonitoringInterval  
  INTEGER as rndAlarmMaxTreshold  
  INTEGER as rndAlarmMinTreshold  
  DisplayString as rndMonitoringLogfile  
  RowStatus as rndMonitoringEntryStatus  

RndMibFileEntry  
SEQUENCE    
  INTEGER as rndMibFileIndex  
  DisplayString as rndMibFilePath  
  INTEGER as rndMibFileRefresh  
  RowStatus as rndMibFileEntryStatus  

RndDeleteValuesEntry  
SEQUENCE    
  DisplayString as rndRowStatusVariableName  
  OBJECT IDENTIFIER as rndRowStatusObjectId  
  INTEGER as rndRowDeleteValue  
  RowStatus as rndDeleteValueEntryStatus  

RsIpZhrStatusEntry  
SEQUENCE    
  IpAddress as rsIpZhrStatusIpIntf  
  INTEGER as rsIpZhrAdminStatus  

RsIpZhrVirtAddressEntry  
SEQUENCE    
  IpAddress as rsIpZhrVirtAddressIpIntf  
  IpAddress as rsIpZhrVirtAddressTo  
  IpAddress as rsIpZhrVirtAddressFrom  
  RowStatus as rsIpZhrVirtAddressStatus  

RsIpZhrConnectionEntry  
SEQUENCE    
  IpAddress as rsIpZhrConnectionIpIntf  
  IpAddress as rsIpZhrConnectionSrcIp  
  IpAddress as rsIpZhrConnectionDestIp  
  IpAddress as rsIpZhrConnectionVirtualIp  
  INTEGER as rsIpZhrConnectionType  
  INTEGER as rsIpZhrConnectionAge  
  RowStatus as rsIpZhrConnectionStatus  

RsWSDServerStatEntry  
SEQUENCE    
  DisplayString as rsWSDSerStatName  
  INTEGER as rsWSDSerStatAttUsersNum  
  INTEGER as rsWSDSerStatPeakLoad  
  INTEGER as rsWSDSerStatFramesRate  
  Counter as rsWSDSerStatFramesLoad  
  INTEGER as rsWSDSerStatRecoveryTime  
  INTEGER as rsWSDSerStatWarmUpTime  
  INTEGER as rsWSDSerStatConnectionLimit  
  INTEGER as rsWSDSerStatAdminStatus  
  INTEGER as rsWSDSerStatConnectionLimitReached  

WsdRedundEntry  
SEQUENCE    
  IpAddress as wsdRedundFarmAddr  
  IpAddress as wsdRedundMainWsdAddr  
  INTEGER as wsdRedundOperStatus  
  INTEGER as wsdRedundPollInterval  
  INTEGER as wsdRedundTimeout  
  INTEGER as wsdRedundStatus  

RsWSDNTCheckEntry  
SEQUENCE    
  INTEGER as rsWSDNTSerialNum  
  INTEGER as rsWSDNTFrequentCheckPeriod  
  INTEGER as rsWSDNTOpenSessionsWeight  
  INTEGER as rsWSDNTIncomingTrafficWeight  
  INTEGER as rsWSDNTOutgoingTrafficWeight  
  INTEGER as rsWSDNTRegularCheckPeriod  
  INTEGER as rsWSDNTAvResponseWeight  
  INTEGER as rsWSDNTUsersLimitWeight  
  INTEGER as rsWSDNTTCPLimitWeight  
  INTEGER as rsWSDNTRetries  
  DisplayString as rsWSDNTCommunity  

RsWSDPrivateCheckEntry  
SEQUENCE    
  INTEGER as rsWSDPrivateSerialNum  
  INTEGER as rsWSDPrivateSpecialCheckPeriod  
  OBJECT IDENTIFIER as rsWSDPrivateExtraVar1ID  
  INTEGER as rsWSDPrivateExtraVar1Weight  
  OBJECT IDENTIFIER as rsWSDPrivateExtraVar2ID  
  INTEGER as rsWSDPrivateExtraVar2Weight  
  INTEGER as rsWSDPrivateRetries  
  DisplayString as rsWSDPrivateCommunity  
  INTEGER as rsWSDPrivateExtraVar1Mode  
  INTEGER as rsWSDPrivateExtraVar2Mode  

RsWSDIfEntry  
SEQUENCE    
  INTEGER as rsWSDIfIndex  
  INTEGER as rsWSDIfBoardNum  
  NetworkAddress as rsWSDIfNetAddress  
  INTEGER as rsWSDIfStatus  
  INTEGER as rsWSDIfClockType  
  INTEGER as rsWSDIfBaudRate  
  INTEGER as rsWSDIfCost  
  INTEGER as rsWSDIfCompression  
  INTEGER as rsWSDIfCompressionStatus  
  INTEGER as rsWSDIfCompressionRate  
  INTEGER as rsWSDIfLATCompression  
  INTEGER as rsWSDIfCompressionType  
  INTEGER as rsWSDIfFilterMode  
  INTEGER as rsWSDIfChannelType  
  INTEGER as rsWSDIfBridge  
  INTEGER as rsWSDHighPriorityIf  
  INTEGER as rsWSDWanHeader  
  INTEGER as rsWSDDuplexMode  

RsWSDApplicationMirrorEntry  
SEQUENCE    
  IpAddress as rsWSDMirrorActiveAddress  
  INTEGER as rsWSDMirrorActiveStatus  

RsWSDSCProtcolsEntry  
SEQUENCE    
  INTEGER as rsWSDSCProtocol  
  INTEGER as rsWSDSCProtocolStatus  

RsWSDSNMPPortsEntry  
SEQUENCE    
  INTEGER as rsWSDSNMPPhysicalPortNumber  
  INTEGER as rsWSDSNMPPhysicalPortState  

RsWSDTelnetUserEntry  
SEQUENCE    
  DisplayString as rsWSDTelnetUserName  
  DisplayString as rsWSDTelnetUserPassword  
  DisplayString as rsWSDTelnetUserEAddr  
  INTEGER as rsWSDTelnetUserSeverity  
  RowStatus as rsWSDTelnetUserStatus  
  DisplayString as rsWSDTelnetUserGroup  

RsSSDvirtualLanEntry  
SEQUENCE    
  INTEGER as rsSSDvlIfIndex  
  INTEGER as rsSSDvlProto  
  TruthValue as rsSSDvlAutoConfigEnable  
  RowStatus as rsSSDvlStatus  
  INTEGER as rsSSDvlType  
  INTEGER as rsSSDvlTag  
  INTEGER as rsSSDvlPriority  

RsSSDvirtualLanPortEntry  
SEQUENCE    
  INTEGER as rsSSDvLIfIndex  
  INTEGER as rsSSDvLPortIfIndex  
  INTEGER as rsSSDvLPortType  
  RowStatus as rsSSDvLPortStatus  
  INTEGER as rsSSDvLPortTag  

RsPhysPortMirrorEntry  
SEQUENCE    
  INTEGER as rsPhysPortMirrorSrcInf  
  INTEGER as rsPhysPortMirrorDstPort  
  INTEGER as rsPhysPortMirrorRxTx  
  INTEGER as rsPhysPortMirrorRxBroadCast  
  RowStatus as rsPhysPortMirrorStatus  
  INTEGER as rsPhysPortMirrorBackupDstPort  
  INTEGER as rsPhysPortMirrorDstStatus  
  INTEGER as rsPhysPortMirrorBackupStatus  
  INTEGER as rsPhysPortMirrorActiveDstPort  

RsVWSDDataPermissionsTableEntry  
SEQUENCE    
  DisplayString as rsVWSDUserGroup  
  OCTET STRING as rsVWSDDataType  
  OCTET STRING as rsVWSDDataItems  
  RowStatus as rsVWSDDataStatus  

RsWSDManagementPortsEntry  
SEQUENCE    
  INTEGER as rsWSDPortIndex  
  INTEGER as rsWSDPortOperation  

RsWSDStaticForwardingEntry  
SEQUENCE    
  INTEGER as rsWSDStaticSourcePort  
  INTEGER as rsWSDStaticDestinationPort  
  INTEGER as rsWSDStaticPortOperation  
  RowStatus as rsWSDStaticStatus  

RsIfEntry  
SEQUENCE    
  INTEGER as rsIfIndex  
  INTEGER as rsIfSpeed  
  INTEGER as rsIfDuplex  
  INTEGER as rsIfAutoNegotiate  
  RowStatus as rsIfRowStatus