RAID-Adapter-MIB

File: RAID-Adapter-MIB.mib (60628 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212
RFC-1215

Imported symbols

enterprises Counter DisplayString
OBJECT-TYPE TRAP-TYPE

Defined Objects

lsi 1.3.6.1.4.1.3582
OBJECT IDENTIFIER    

megaRaid 1.3.6.1.4.1.3582.1
OBJECT IDENTIFIER    

megaRaidMib 1.3.6.1.4.1.3582.1.1
OBJECT IDENTIFIER    

adapterTable 1.3.6.1.4.1.3582.1.1.1
A List of Adapter Entries containing Information/Properties about the Adapters in the System.
OBJECT-TYPE    
  SEQUENCE OF  
    AdapterEntry

adapterEntry 1.3.6.1.4.1.3582.1.1.1.1
An entry in the Adapter Table. Each Entry corresponds to one Adapter in the System.
OBJECT-TYPE    
  AdapterEntry  

adpAdapterNumber 1.3.6.1.4.1.3582.1.1.1.1.1
The Adapter Number for this Instance of Adapter Object. This Entry in the Table, contains Information about the Adapter Number specified by this variable.
OBJECT-TYPE    
  INTEGER  

numLogicalDrives 1.3.6.1.4.1.3582.1.1.1.1.2
Number of Logical Drives Configured on this Adapter.
OBJECT-TYPE    
  INTEGER 0..8  

firmwareVersion 1.3.6.1.4.1.3582.1.1.1.1.3
The Firmware Version of the Firmware running on this Adapter.
OBJECT-TYPE    
  DisplayString  

biosVersion 1.3.6.1.4.1.3582.1.1.1.1.4
The Bios Version of the BIOS Present in the Flash ROM on this Adapter.
OBJECT-TYPE    
  DisplayString  

dramSizeInMB 1.3.6.1.4.1.3582.1.1.1.1.5
Amount of DRAM in Mega Bytes present on this Adapter.
OBJECT-TYPE    
  INTEGER  

rebuildRateInPercent 1.3.6.1.4.1.3582.1.1.1.1.6
Rebuild Rate for this Adapter. This determines the Priority of Rebuild/Check-Consistency/Reconstruct Operations versus the Read-Write Operations.
OBJECT-TYPE    
  INTEGER 0..100  

flushInterval 1.3.6.1.4.1.3582.1.1.1.1.7
Internal Cache Flush Interval for Logical Drives in WriteBack Mode.
OBJECT-TYPE    
  INTEGER twoSec(2), fourSec(4), sixSec(6), eightSec(8), tenSec(10)  

maxConcurrentCmds 1.3.6.1.4.1.3582.1.1.1.1.8
Maximum Concurrent Commands Supported by the Adapter.
OBJECT-TYPE    
  INTEGER  

spinupDelay 1.3.6.1.4.1.3582.1.1.1.1.9
This is the Spinup Delay for Spinning Up Physical Drives at Firmware Initialization Time. The Physical Drives are divided into Groups, each containing the number of drives indicated by the spinupCount variable. spinupDelay variable is the amount of delay used before the drives in the next group are issued a SPINUP Command.
OBJECT-TYPE    
  INTEGER  

spinupCount 1.3.6.1.4.1.3582.1.1.1.1.10
This is the Spinup Count for Spinning up Physical Drives at Firmware Initialization Time. The Physical Drives are divided into Groups, each containing the number of drives indicated by this variable. All the drives in a group are issued SPINUP Command without any delay. Next group is given SPINUP Commands after a delay indicated by the spinupDelay variable.
OBJECT-TYPE    
  INTEGER  

adpIOReadsPerSec 1.3.6.1.4.1.3582.1.1.1.1.11
Number of IO Reads/sec statistics for this adapter.
OBJECT-TYPE    
  INTEGER  

adpIOWritesPerSec 1.3.6.1.4.1.3582.1.1.1.1.12
Number of IO Writes/sec statistics for this adapter.
OBJECT-TYPE    
  INTEGER  

adpReadKBsPerSec 1.3.6.1.4.1.3582.1.1.1.1.13
Amount of Data Transferred in KBs/sec due to READ Transfers.
OBJECT-TYPE    
  INTEGER  

adpWriteKBsPerSec 1.3.6.1.4.1.3582.1.1.1.1.14
Amount of Data Transferred in KBs/sec due to WRITE Transfers.
OBJECT-TYPE    
  INTEGER  

adpReadFailuresPerSec 1.3.6.1.4.1.3582.1.1.1.1.15
Number of Read-Failures/sec statistics for this adapter.
OBJECT-TYPE    
  INTEGER  

adpWriteFailuresPerSec 1.3.6.1.4.1.3582.1.1.1.1.16
Number of Write-Failures/sec statistics for this adapter.
OBJECT-TYPE    
  INTEGER  

scanChannels 1.3.6.1.4.1.3582.1.1.1.1.17
Use this Variable to Discover the Non-Disk Devices attached to the Adapter. Set this Variable to startscan (an integer value of 2) to start the Channel Scanning.
OBJECT-TYPE    
  INTEGER scanOver(1), startScan(2), scanInProg(3)  

adpBasePort 1.3.6.1.4.1.3582.1.1.1.1.18
Maximum Concurrent Commands Supported by the Adapter.
OBJECT-TYPE    
  DisplayString  

numSCSIChannels 1.3.6.1.4.1.3582.1.1.1.1.19
Maximum number of SCSI Channels Supported by the Adapter.
OBJECT-TYPE    
  INTEGER  

numFCLoops 1.3.6.1.4.1.3582.1.1.1.1.20
Number of Fibre channel loops Supported by the Adapter.
OBJECT-TYPE    
  INTEGER  

subSystemID 1.3.6.1.4.1.3582.1.1.1.1.21
The PCI sub system ID of this controller
OBJECT-TYPE    
  INTEGER  

subSystemVendorID 1.3.6.1.4.1.3582.1.1.1.1.22
The PCI sub system vendor ID of this controller
OBJECT-TYPE    
  INTEGER  

productName 1.3.6.1.4.1.3582.1.1.1.1.23
The enriched formation of the controller retrieved from the firmware
OBJECT-TYPE    
  DisplayString  

adpSpeed 1.3.6.1.4.1.3582.1.1.1.1.24
Maximum transfer speed of the adapter.
OBJECT-TYPE    
  INTEGER fiveMB(1), tenMB(2), twentyMB(3), fortyMB(4), eightyMB(5), oneHundredSixtyMB(6), threeHundredTwentyMB(7), unAvailable(20)  

logicaldriveTable 1.3.6.1.4.1.3582.1.1.2
A List of Logical Drive Entries containing Information/Properties about the Logical Drives Configured in the System.
OBJECT-TYPE    
  SEQUENCE OF  
    LogicaldriveEntry

logicaldriveEntry 1.3.6.1.4.1.3582.1.1.2.1
An Entry in the Logical Drive Table.
OBJECT-TYPE    
  LogicaldriveEntry  

ldAdapterNumber 1.3.6.1.4.1.3582.1.1.2.1.1
The Adapter Number for this Instance of Adapter/LogicalDrive object.
OBJECT-TYPE    
  INTEGER  

logicalDriveNumber 1.3.6.1.4.1.3582.1.1.2.1.2
Logical Drive Number for this Logical Drive Entry.
OBJECT-TYPE    
  INTEGER  

status 1.3.6.1.4.1.3582.1.1.2.1.3
The Status of this Logical Drive.
OBJECT-TYPE    
  INTEGER offLine(0), degraded(1), optimal(2), initialize(3), checkConsistency(4)  

sizeInMB 1.3.6.1.4.1.3582.1.1.2.1.4
The Configured Size of this Logical Drive.
OBJECT-TYPE    
  INTEGER  

raidLevel 1.3.6.1.4.1.3582.1.1.2.1.5
Configured Raid Level for this Logical Drive.
OBJECT-TYPE    
  INTEGER rAID0(0), rAID1(1), rAID3(3), rAID5(5)  

stripeSize 1.3.6.1.4.1.3582.1.1.2.1.6
Configured Stripe Size for this Logical Drive.
OBJECT-TYPE    
  INTEGER oneKB(1), twoKB(2), fourKB(4), eightKB(8), sixteenKB(16), thirtyTwoKB(32), sixtyFourKB(64), oneTwentyEightKB(128)  

readPolicy 1.3.6.1.4.1.3582.1.1.2.1.7
Configured Read Policy for this Logical Drive.
OBJECT-TYPE    
  INTEGER normal(0), readAhead(1), adaptive(2)  

writePolicy 1.3.6.1.4.1.3582.1.1.2.1.8
Configured Write Policy for this Logical Drive.
OBJECT-TYPE    
  INTEGER writeThru(0), writeBack(1)  

cachePolicy 1.3.6.1.4.1.3582.1.1.2.1.9
Configured Cache Policy for this Logical Drive.
OBJECT-TYPE    
  INTEGER cachedIO(0), directIO(1)  

enquiryString 1.3.6.1.4.1.3582.1.1.2.1.10
SCSI Inquiry String for this Logical Drive.
OBJECT-TYPE    
  DisplayString SIZE(29..29)  

numberOfSpans 1.3.6.1.4.1.3582.1.1.2.1.11
Number of Arrays across which this Logical Drive is Spanning.
OBJECT-TYPE    
  INTEGER 1..4  

numberOfStripes 1.3.6.1.4.1.3582.1.1.2.1.12
Configured Number of Stripes for this Logical Drive.
OBJECT-TYPE    
  INTEGER 1..8  

checkConsistencyOrInitializeProgress 1.3.6.1.4.1.3582.1.1.2.1.13
Check Consistency or Initialize Progress for this Logical Drive if the Logical Drive Status is checkconsistencyinprogress or initializeinprogress.
OBJECT-TYPE    
  DisplayString SIZE(1..20)  

ldIOReadsPerSec 1.3.6.1.4.1.3582.1.1.2.1.14
Number of IO Reads/sec Statistics for this Logical Drive.
OBJECT-TYPE    
  INTEGER  

ldIOWritesPerSec 1.3.6.1.4.1.3582.1.1.2.1.15
Number of IO Writes/sec Statistics for this Logical Drive.
OBJECT-TYPE    
  INTEGER  

ldReadKBsPerSec 1.3.6.1.4.1.3582.1.1.2.1.16
Amount of Data Transferred in KBs/sec due to READ Transfers.
OBJECT-TYPE    
  INTEGER  

ldWriteKBsPerSec 1.3.6.1.4.1.3582.1.1.2.1.17
Amount of Data Transferred in KBs/sec due to WRITE Transfers.
OBJECT-TYPE    
  INTEGER  

ldReadFailuresPerSec 1.3.6.1.4.1.3582.1.1.2.1.18
Number of Read-Failures/sec Statistics for this Logical Drive.
OBJECT-TYPE    
  INTEGER  

ldWriteFailuresPerSec 1.3.6.1.4.1.3582.1.1.2.1.19
Number of Write-Failures/sec Statistics for this Logical Drive.
OBJECT-TYPE    
  INTEGER  

physicaldriveTable 1.3.6.1.4.1.3582.1.1.3
A List of Physical Device Entries containing Information about the Physical Devices in the System.
OBJECT-TYPE    
  SEQUENCE OF  
    PhysicaldriveEntry

physicaldriveEntry 1.3.6.1.4.1.3582.1.1.3.1
An Entry in the Physical Drive Table.
OBJECT-TYPE    
  PhysicaldriveEntry  

physAdapterNumber 1.3.6.1.4.1.3582.1.1.3.1.1
The Adapter Number for this Instance of Adapter/Physical-Drive Instance.
OBJECT-TYPE    
  INTEGER 1..4  

physChannel 1.3.6.1.4.1.3582.1.1.3.1.2
Channel Number at Which this Physical Drive is Present.
OBJECT-TYPE    
  INTEGER 1..3  

targetID 1.3.6.1.4.1.3582.1.1.3.1.3
SCSI Target ID at Which This Physical Drive is Present.
OBJECT-TYPE    
  INTEGER 0..15  

state 1.3.6.1.4.1.3582.1.1.3.1.4
Current State of this Physical Drive.
OBJECT-TYPE    
  INTEGER ready(1), online(3), failed(4), rebuild(5), hotSpare(6), nonDisk(20)  

arrayPosition 1.3.6.1.4.1.3582.1.1.3.1.5
Array is a group of Physical Drives used to Configure Logical Drives. This String Variable has values of the type Ai-j. Example: A1-2 implies that this drive is 2nd member of Array-1.
OBJECT-TYPE    
  DisplayString SIZE(4..20)  

sizeMB 1.3.6.1.4.1.3582.1.1.3.1.6
Actual Size of this Physical Drive.
OBJECT-TYPE    
  INTEGER  

deviceType 1.3.6.1.4.1.3582.1.1.3.1.7
Device Type of this Physical Drive.
OBJECT-TYPE    
  INTEGER disk(0), tape(1), printer(2), processor(3), wORM(4), cDROM(5), scanner(6), optical(7), changer(8), communication(9), asynchronousLow(10), asynchronousHigh(11), reservedLow(12)  

inquiryString 1.3.6.1.4.1.3582.1.1.3.1.8
SCSI Inquiry String for this Device.
OBJECT-TYPE    
  DisplayString SIZE(29..29)  

scsiLevel 1.3.6.1.4.1.3582.1.1.3.1.9
ANSI SCSI Level Conformance of this Device.
OBJECT-TYPE    
  INTEGER sCSI1(1), sCSI2(2), sCSI3(3), sCSI4(4)  

maximumQueueDepth 1.3.6.1.4.1.3582.1.1.3.1.10
The maximum queue depth of this Device.
OBJECT-TYPE    
  INTEGER  

rebuildProgress 1.3.6.1.4.1.3582.1.1.3.1.11
Rebuild Progress for this Physical Drive if the Physical Drive State is Rebuild.
OBJECT-TYPE    
  DisplayString SIZE(1..25)  

mediumErrors 1.3.6.1.4.1.3582.1.1.3.1.12
Medium Errors Occurred on this Drive Since it was Configured.
OBJECT-TYPE    
  INTEGER  

physSlotStatus 1.3.6.1.4.1.3582.1.1.3.1.13
Indicates the status of interest on the drive slot
OBJECT-TYPE    
  INTEGER 0..7  

physSlotNumber 1.3.6.1.4.1.3582.1.1.3.1.14
SCSI Target Slot Number at Which This Physical Drive is Present.
OBJECT-TYPE    
  INTEGER 0..15  

otherErrors 1.3.6.1.4.1.3582.1.1.3.1.15
Other Errors Occurred on this Drive Since it was Configured.
OBJECT-TYPE    
  INTEGER  

physTermination 1.3.6.1.4.1.3582.1.1.3.1.16
Negotiation Information of the physical drive. This field is applicable only to drives.
OBJECT-TYPE    
  INTEGER wide(0), narrow(1), notSupported(20)  

physSpeed 1.3.6.1.4.1.3582.1.1.3.1.17
Transfer speed of the physical drive. This field is applicable only to drives.
OBJECT-TYPE    
  INTEGER maximum(0), asynchronous(1), fiveMB(2), tenMB(3), twentyMB(4), fortyMB(5), eightyMB(6), oneHundredSixtyMB(7), threeHundredTwentyMB(8), notSupported(20)  

lunNumber 1.3.6.1.4.1.3582.1.1.3.1.18
SCSI LUN ID of this Physical Device
OBJECT-TYPE    
  INTEGER 0..7  

channelTable 1.3.6.1.4.1.3582.1.1.4
A List of Channel Entries containing Information/Properties about the Channels on the Adapter.
OBJECT-TYPE    
  SEQUENCE OF  
    ChannelEntry

channelEntry 1.3.6.1.4.1.3582.1.1.4.1
An Entry in the channel table.
OBJECT-TYPE    
  ChannelEntry  

chanAdapterNumber 1.3.6.1.4.1.3582.1.1.4.1.1
The Adapter Number for this Instance of Adapter/Channel Instance.
OBJECT-TYPE    
  INTEGER  

channel 1.3.6.1.4.1.3582.1.1.4.1.2
Channel Number for this Channel.
OBJECT-TYPE    
  INTEGER  

terminations 1.3.6.1.4.1.3582.1.1.4.1.3
Current Terminations Effective on this Channel
OBJECT-TYPE    
  INTEGER disabled(0), higher8Bits(1), wideTerminations(2)  

channelStatus 1.3.6.1.4.1.3582.1.1.4.1.4
Current Activity Status (QUIET/ACTIVE) for this Channel.
OBJECT-TYPE    
  INTEGER quiet(1), active(2)  

channelType 1.3.6.1.4.1.3582.1.1.4.1.5
Type of the channel(RAID/SCSI).
OBJECT-TYPE    
  INTEGER sCSI(0), rAID(1)  

fcDeviceTable 1.3.6.1.4.1.3582.1.1.5
A List of Entries containing Information about the FC Devices in the System.
OBJECT-TYPE    
  SEQUENCE OF  
    FcDeviceEntry

fcDeviceEntry 1.3.6.1.4.1.3582.1.1.5.1
An Entry in the FC Device Table.
OBJECT-TYPE    
  FcDeviceEntry  

fcPhysAdapterNumber 1.3.6.1.4.1.3582.1.1.5.1.1
The Adapter Number for this Instance of Adapter/Physical-Drive Instance.
OBJECT-TYPE    
  INTEGER 1..4  

fcPhysChannel 1.3.6.1.4.1.3582.1.1.5.1.2
The Channel Number for this Instance of Adapter/Physical-Drive
OBJECT-TYPE    
  INTEGER 0..15  

fcTargetId 1.3.6.1.4.1.3582.1.1.5.1.3
The Target Number for this Instance of Adapter/Physical-Drive
OBJECT-TYPE    
  INTEGER 0..15  

fcLoopID-0 1.3.6.1.4.1.3582.1.1.5.1.4
Loop ID of this FC Drive.
OBJECT-TYPE    
  INTEGER inLoop0(1), inLoop1(2), notInTheLoop(255)  

fcLoopID-1 1.3.6.1.4.1.3582.1.1.5.1.5
Loop ID of this FC Drive.
OBJECT-TYPE    
  INTEGER inLoop0(1), inLoop1(2), notInTheLoop(255)  

fcWwn 1.3.6.1.4.1.3582.1.1.5.1.6
WWN is the World Wide Name of this FC device
OBJECT-TYPE    
  DisplayString SIZE(4..20)  

fcState 1.3.6.1.4.1.3582.1.1.5.1.7
Current State of this Physical Drive.
OBJECT-TYPE    
  INTEGER ready(1), online(3), failed(4), rebuild(5), hotspare(6), nonDisk(20)  

fcArrayPosition 1.3.6.1.4.1.3582.1.1.5.1.8
Array is a group of Physical Drives used to Configure Logical Drives. This String Variable has values of the type Ai-j. Example: A1-2 implies that this drive is 2nd member of Array-1.
OBJECT-TYPE    
  DisplayString SIZE(4..20)  

fcSizeMB 1.3.6.1.4.1.3582.1.1.5.1.9
Actual Size of this Physical Drive.
OBJECT-TYPE    
  INTEGER  

fcInquiryString 1.3.6.1.4.1.3582.1.1.5.1.10
SCSI Inquiry String for this Device.
OBJECT-TYPE    
  DisplayString SIZE(29..29)  

fcScsiLevel 1.3.6.1.4.1.3582.1.1.5.1.11
ANSI SCSI Level Conformance of this Device.
OBJECT-TYPE    
  INTEGER sCSI1(1), sCSI2(2), sCSI3(3), sCSI4(4)  

fcRebuildProgress 1.3.6.1.4.1.3582.1.1.5.1.12
Rebuild Progress for this Physical Drive if the Physical Drive State is Rebuild.
OBJECT-TYPE    
  DisplayString SIZE(1..25)  

fcMediumErrors 1.3.6.1.4.1.3582.1.1.5.1.13
Medium Errors Occurred on this Drive Since it was Configured.
OBJECT-TYPE    
  INTEGER  

fcOtherErrors 1.3.6.1.4.1.3582.1.1.5.1.14
Other Errors Occurred on this Drive Since it was Configured.
OBJECT-TYPE    
  INTEGER  

fcChannelTable 1.3.6.1.4.1.3582.1.1.6
A List of FC Channel Entries containing Information about the FC Channels on the Adapter.
OBJECT-TYPE    
  SEQUENCE OF  
    FcChannelEntry

fcChannelEntry 1.3.6.1.4.1.3582.1.1.6.1
An Entry in the FC channel table.
OBJECT-TYPE    
  FcChannelEntry  

fcChanAdapterNumber 1.3.6.1.4.1.3582.1.1.6.1.1
The Adapter Number for this Instance of Adapter/fc-Channel Instance.
OBJECT-TYPE    
  INTEGER  

fcChannel 1.3.6.1.4.1.3582.1.1.6.1.2
The Channel Number for this Instance
OBJECT-TYPE    
  INTEGER  

fcLoopNumber 1.3.6.1.4.1.3582.1.1.6.1.3
Loop Index for this fcChannel.
OBJECT-TYPE    
  INTEGER  

fcLoopStatus 1.3.6.1.4.1.3582.1.1.6.1.4
Current Activity Status (QUIET/ACTIVE) for this fcChannel.
OBJECT-TYPE    
  INTEGER quiet(1), active(2)  

fcNumberofDevices 1.3.6.1.4.1.3582.1.1.6.1.5
The number of FC devices in this fcChannel
OBJECT-TYPE    
  INTEGER  

fcProcessorType 1.3.6.1.4.1.3582.1.1.6.1.6
The processor type on this fcChannel
OBJECT-TYPE    
  INTEGER  

ioReadsPerSec 1.3.6.1.4.1.3582.1.1.9
The Total IO-Reads/Sec Statistics on all Adapters.
OBJECT-TYPE    
  INTEGER  

ioWritesPerSec 1.3.6.1.4.1.3582.1.1.10
The Total IO-Writes/Sec Statistics on all Adapters.
OBJECT-TYPE    
  INTEGER  

readKBsPerSec 1.3.6.1.4.1.3582.1.1.11
The Total Read KBs Per Second Statistics on all Adapters.
OBJECT-TYPE    
  INTEGER  

writeKBsPerSec 1.3.6.1.4.1.3582.1.1.12
The Total Write KBs Per Second Statistics on all Adapters.
OBJECT-TYPE    
  INTEGER  

readFailuresPerSec 1.3.6.1.4.1.3582.1.1.13
The Total Read Failures Per Second Statistics on all Adapters.
OBJECT-TYPE    
  INTEGER  

writeFailuresPerSec 1.3.6.1.4.1.3582.1.1.14
The Total Write Failures Per Second Statistics on all Adapters.
OBJECT-TYPE    
  INTEGER  

enclConfigurationTable 1.3.6.1.4.1.3582.1.1.15
A List of Enclosure Configuration Entries containing Information about the SAF-TE Enclosures in the System.
OBJECT-TYPE    
  SEQUENCE OF  
    EnclConfigurationEntry

enclConfigurationEntry 1.3.6.1.4.1.3582.1.1.15.1
An Entry in the Enclosure Configuration Table.
OBJECT-TYPE    
  EnclConfigurationEntry  

enclAdapterNumber 1.3.6.1.4.1.3582.1.1.15.1.1
The Adapter Number for this Instance of Adapter/Enclosure Instance.
OBJECT-TYPE    
  INTEGER 1..4  

enclNumber 1.3.6.1.4.1.3582.1.1.15.1.2
Indicates the enclosure number for this Enclosure. The numbering is w.r.t adapter and not w.r.t Channel
OBJECT-TYPE    
  INTEGER 1..3  

enclChannel 1.3.6.1.4.1.3582.1.1.15.1.3
Channel Number at Which this Enclosure is Present.
OBJECT-TYPE    
  INTEGER 1..3  

enclNumDeviceSlots 1.3.6.1.4.1.3582.1.1.15.1.4
Total number of device slots on the channel for this Enclosure
OBJECT-TYPE    
  INTEGER 0..15  

enclNumFans 1.3.6.1.4.1.3582.1.1.15.1.5
Total number SEP manageable of fans for this Enclosure
OBJECT-TYPE    
  INTEGER 0..15  

enclNumTempSensors 1.3.6.1.4.1.3582.1.1.15.1.6
Number of SEP manageable Temperature Sensors for this Enclosure
OBJECT-TYPE    
  INTEGER 0..15  

enclNumPowerSupplies 1.3.6.1.4.1.3582.1.1.15.1.7
Maximum number of SEP manageable Power Supplies for this Enclosure
OBJECT-TYPE    
  INTEGER 0..15  

enclDoorLockStatus 1.3.6.1.4.1.3582.1.1.15.1.8
Indicates whether this enclosure has door lock installed/locked/unlocked
OBJECT-TYPE    
  INTEGER notInstalled(0), unlocked(1), locked(2), other(3)  

enclAudibleAlarm 1.3.6.1.4.1.3582.1.1.15.1.9
Indicates the availability of Audible Alarm with this Enclosure
OBJECT-TYPE    
  INTEGER noAudibleAlarm(0), audibleAlarm(1), other(2)  

enclAlarmStatus 1.3.6.1.4.1.3582.1.1.15.1.10
Indicates whether this Enclosure speaker is ON or OFF
OBJECT-TYPE    
  INTEGER off(0), on(1), other(2)  

enclTemperatureScale 1.3.6.1.4.1.3582.1.1.15.1.11
Indicates whether this Enclosure reports temperature in Celsius or Fahrenheit
OBJECT-TYPE    
  INTEGER fahrenheit(0), celsius(1)  

enclTotalPowerOnMins 1.3.6.1.4.1.3582.1.1.15.1.12
This indicates the total time in minutes that the RAID device has been powered ON. It is cumulative over the life of the device
OBJECT-TYPE    
  INTEGER 0..4294967295  

enclTotalPowerOnCycles 1.3.6.1.4.1.3582.1.1.15.1.13
This indicates the count of number of times that the RAID device has been powered ON. It is cumulative over the life of the device
OBJECT-TYPE    
  INTEGER 0..4294967295  

enclFanTable 1.3.6.1.4.1.3582.1.1.16
A List of SAF-TE Enclosure Fan Entries
OBJECT-TYPE    
  SEQUENCE OF  
    EnclFanEntry

enclFanEntry 1.3.6.1.4.1.3582.1.1.16.1
An Entry in the Enclosure Fan Table.
OBJECT-TYPE    
  EnclFanEntry  

enclNumberFan 1.3.6.1.4.1.3582.1.1.16.1.1
Enclosure Number at Which this Enclosure with the Fan is Present.
OBJECT-TYPE    
  INTEGER 1..3  

enclFanIndex 1.3.6.1.4.1.3582.1.1.16.1.2
The instance of the fan in the enclosure for the adapter/channel
OBJECT-TYPE    
  INTEGER 0..255  

enclFanStatus 1.3.6.1.4.1.3582.1.1.16.1.3
The Status of this fan
OBJECT-TYPE    
  INTEGER operational(0), malfunction(1), notInstalled(2), unknown(128)  

enclPowerSupplyTable 1.3.6.1.4.1.3582.1.1.17
A List of SAF-TE Enclosure Power Supply Entries
OBJECT-TYPE    
  SEQUENCE OF  
    EnclPowerSupplyEntry

enclPowerSupplyEntry 1.3.6.1.4.1.3582.1.1.17.1
An Entry in the Enclosure Power Supply Table.
OBJECT-TYPE    
  EnclPowerSupplyEntry  

enclNumberPower 1.3.6.1.4.1.3582.1.1.17.1.1
enclosure number at Which this Enclosure with the Power Supply is Present.
OBJECT-TYPE    
  INTEGER 1..3  

enclPowerSupplyIndex 1.3.6.1.4.1.3582.1.1.17.1.2
The instance of the PowerSupply in the enclosure for the adapter/channel
OBJECT-TYPE    
  INTEGER 0..255  

enclPowerSupplyStatus 1.3.6.1.4.1.3582.1.1.17.1.3
The Status of this PowerSupply
OBJECT-TYPE    
  INTEGER operationalON(0), operationalOFF(1), malfunctionON(2), malfunctionOFF(3), notPresent(4), present(5), unknown(128)  

enclTempSensorsTable 1.3.6.1.4.1.3582.1.1.18
A List of SAF-TE Enclosure Temperature Sensor Entries
OBJECT-TYPE    
  SEQUENCE OF  
    EnclTempSensorsEntry

enclTempSensorsEntry 1.3.6.1.4.1.3582.1.1.18.1
An Entry in the Enclosure Temperature Sensor Table.
OBJECT-TYPE    
  EnclTempSensorsEntry  

enclNumberTemp 1.3.6.1.4.1.3582.1.1.18.1.1
enclosure number at Which this Enclosure with the temperature sensor is Present.
OBJECT-TYPE    
  INTEGER 1..3  

enclTempSensorIndex 1.3.6.1.4.1.3582.1.1.18.1.2
The instance of the temperature sensor indices in the enclosure for the adapter/channel
OBJECT-TYPE    
  INTEGER 0..15  

enclTemperature 1.3.6.1.4.1.3582.1.1.18.1.3
Indicates the temperature reported by the sensor in degree Fahrenheit
OBJECT-TYPE    
  INTEGER -10..245  

raidTraps 1.3.6.1.4.1.3582.1.1.200
OBJECT IDENTIFIER    

rtAdapterNumber 1.3.6.1.4.1.3582.1.1.200.1001
Adapter Number for which Trap is generated.
OBJECT-TYPE    
  INTEGER  

rtLogicalDriveNumber 1.3.6.1.4.1.3582.1.1.200.1002
Logical Drive Number for which Trap is generated.
OBJECT-TYPE    
  INTEGER  

rtChannelNumber 1.3.6.1.4.1.3582.1.1.200.1003
Channel Number on the Adapter for which Trap is Generated.
OBJECT-TYPE    
  INTEGER  

rtTargetID 1.3.6.1.4.1.3582.1.1.200.1004
Device ID of the Physical Drive for which Trap is Generated.
OBJECT-TYPE    
  INTEGER  

rtOldDriveState 1.3.6.1.4.1.3582.1.1.200.1005
Old State of Logical/Physical Drive, when a State Change Trap is Generated.
OBJECT-TYPE    
  DisplayString  

rtNewDriveState 1.3.6.1.4.1.3582.1.1.200.1006
New State of Logical/Physical Drive, when a State Change Trap is Generated.
OBJECT-TYPE    
  DisplayString  

rtSenseKey 1.3.6.1.4.1.3582.1.1.200.1007
Check Condition Sense-Key reported by Physical Drive for which Trap is Generated.
OBJECT-TYPE    
  INTEGER  

rtASC 1.3.6.1.4.1.3582.1.1.200.1008
Check Condition Additional Sense Code (ASC) reported by Physical Drive for which Trap is Generated.
OBJECT-TYPE    
  INTEGER  

rtASCQ 1.3.6.1.4.1.3582.1.1.200.1009
Check Condition Additional Sense Code Qualifier (ASCQ) reported by Physical Drive for which Trap is Generated.
OBJECT-TYPE    
  INTEGER  

rtDriveVendor 1.3.6.1.4.1.3582.1.1.200.1010
Vendor Identification String from the SCSI Inquiry Data for the Drive.
OBJECT-TYPE    
  DisplayString  

rtEnclNumber 1.3.6.1.4.1.3582.1.1.200.1011
Enclosure Number reported by the RAID Controller.
OBJECT-TYPE    
  INTEGER  

rtEnclTempSensorIndex 1.3.6.1.4.1.3582.1.1.200.1012
Enclosure Temperature Sensor Number reported by the SEP device
OBJECT-TYPE    
  INTEGER  

rtEnclTemperature 1.3.6.1.4.1.3582.1.1.200.1013
Enclosure Temperature in Fahrenheit reported by the SEP device
OBJECT-TYPE    
  INTEGER  

rtEnclFanIndex 1.3.6.1.4.1.3582.1.1.200.1014
Enclosure Fan Number reported by the SEP device
OBJECT-TYPE    
  INTEGER  

rtEnclPowerSupplyIndex 1.3.6.1.4.1.3582.1.1.200.1015
Enclosure Power Supply Number reported by the SEP device
OBJECT-TYPE    
  INTEGER  

rtWWN 1.3.6.1.4.1.3582.1.1.200.1016
The World Wide Name of the FC device whose loop ID or State changes
OBJECT-TYPE    
  DisplayString  

rtOldLoopID 1.3.6.1.4.1.3582.1.1.200.1017
Index of the loop before its state changed
OBJECT-TYPE    
  INTEGER  

rtNewLoopID 1.3.6.1.4.1.3582.1.1.200.1018
Index of the loop after its state changed
OBJECT-TYPE    
  INTEGER  

rtConfigUpdated 1.3.6.1.4.1.3582.1.1.200.9001
Adapter-%d: A New Configuration has been written.
TRAP-TYPE    
  rtAdapterNumber  

rtPhysicalDriveStateChange 1.3.6.1.4.1.3582.1.1.200.9002
Adapter-%d, Channel-%d, Target-%d: Drive State Changed from %s to %s.
TRAP-TYPE    
  rtAdapterNumber  
  rtChannelNumber  
  rtTargetID  
  rtOldDriveState  
  rtNewDriveState  

rtLogicalDriveStateChange 1.3.6.1.4.1.3582.1.1.200.9003
Adapter-%d, Logical Drive-%d: State Changed from %s to %s.
TRAP-TYPE    
  rtAdapterNumber  
  rtLogicalDriveNumber  
  rtOldDriveState  
  rtNewDriveState  

rtInitializeStarted 1.3.6.1.4.1.3582.1.1.200.9004
Adapter-%d, Logical Drive-%d: Initialization Started.
TRAP-TYPE    
  rtAdapterNumber  
  rtLogicalDriveNumber  

rtInitializeCompleted 1.3.6.1.4.1.3582.1.1.200.9005
Adapter-%d, Logical Drive-%d: Initialization Completed Successfully.
TRAP-TYPE    
  rtAdapterNumber  
  rtLogicalDriveNumber  

rtInitializeAborted 1.3.6.1.4.1.3582.1.1.200.9006
Adapter-%d, Logical Drive-%d: Initialization Aborted by User.
TRAP-TYPE    
  rtAdapterNumber  
  rtLogicalDriveNumber  

rtInitializeFailed 1.3.6.1.4.1.3582.1.1.200.9007
Adapter-%d, Logical Drive-%d: Initialization Failed.
TRAP-TYPE    
  rtAdapterNumber  
  rtLogicalDriveNumber  

rtCheckConsistencyStarted 1.3.6.1.4.1.3582.1.1.200.9008
Adapter-%d, Logical Drive-%d: Check Consistency Started.
TRAP-TYPE    
  rtAdapterNumber  
  rtLogicalDriveNumber  

rtCheckConsistencyCompleted 1.3.6.1.4.1.3582.1.1.200.9009
Adapter-%d, Logical Drive-%d: Check Consistency Completed. No Inconsistencies Found.
TRAP-TYPE    
  rtAdapterNumber  
  rtLogicalDriveNumber  

rtCheckConsistencyAborted 1.3.6.1.4.1.3582.1.1.200.9010
Adapter-%d, Logical Drive-%d: Check Consistency Aborted by User.
TRAP-TYPE    
  rtAdapterNumber  
  rtLogicalDriveNumber  

rtConsistencyCorrected 1.3.6.1.4.1.3582.1.1.200.9011
Adapter-%d, Logical Drive-%d: Check Consistency Operation Completed. Inconsistencies have been Cured.
TRAP-TYPE    
  rtAdapterNumber  
  rtLogicalDriveNumber  

rtCheckConsistencyFailed 1.3.6.1.4.1.3582.1.1.200.9012
Adapter-%d, Logical Drive-%d: Check Consistency Failed.
TRAP-TYPE    
  rtAdapterNumber  
  rtLogicalDriveNumber  

rtReconstructionStarted 1.3.6.1.4.1.3582.1.1.200.9013
Adapter-%d, Logical Drive-%d: Reconstruction Started.
TRAP-TYPE    
  rtAdapterNumber  
  rtLogicalDriveNumber  

rtReconstructionCompleted 1.3.6.1.4.1.3582.1.1.200.9014
Adapter-%d, Logical Drive-%d: Reconstruction Completed Successfully.
TRAP-TYPE    
  rtAdapterNumber  
  rtLogicalDriveNumber  

rtReconstructionFailed 1.3.6.1.4.1.3582.1.1.200.9015
Adapter-%d, Logical Drive-%d: Reconstruction Failed.
TRAP-TYPE    
  rtAdapterNumber  
  rtLogicalDriveNumber  

rtPredictiveFailuresExceeded 1.3.6.1.4.1.3582.1.1.200.9016
Adapter-%d, Channel-%d, Target-%d: Reported Predictive Failure. Drive Identification String = %s Sense Key = 0x%x, ASC = 0x%x, ASCQ = 0x%x.
TRAP-TYPE    
  rtAdapterNumber  
  rtChannelNumber  
  rtTargetID  
  rtDriveVendor  
  rtSenseKey  
  rtASC  
  rtASCQ  

rtPredictiveFailuresFalse 1.3.6.1.4.1.3582.1.1.200.9017
Adapter-%d, Channel-%d, Target-%d: Reported Failure Prediction Threshold Exceeded [FALSE]. Drive Identification String = %s Sense Key = 0x%x, ASC = 0x%x, ASCQ = 0x%x.
TRAP-TYPE    
  rtAdapterNumber  
  rtChannelNumber  
  rtTargetID  
  rtDriveVendor  
  rtSenseKey  
  rtASC  
  rtASCQ  

rtCheckConditionStatus 1.3.6.1.4.1.3582.1.1.200.9018
Adapter-%d, Channel-%d, Target-%d: Command Completed with Sense-Key-0x%x ASC-0x%x ASCQ-0x%x.
TRAP-TYPE    
  rtAdapterNumber  
  rtChannelNumber  
  rtTargetID  
  rtSenseKey  
  rtASC  
  rtASCQ  

rtNewDriveInserted 1.3.6.1.4.1.3582.1.1.200.9019
Adapter-%d, Channel-%d, Target-%d: New Device Inserted.
TRAP-TYPE    
  rtAdapterNumber  
  rtChannelNumber  
  rtTargetID  

rtBatteryMissing 1.3.6.1.4.1.3582.1.1.200.9020
Adapter-%d: Battery Module is missing.
TRAP-TYPE    
  rtAdapterNumber  

rtBatteryVolatageLow 1.3.6.1.4.1.3582.1.1.200.9021
Adapter-%d: Battery Module Voltage is Low.
TRAP-TYPE    
  rtAdapterNumber  

rtBatteryTemperatureHigh 1.3.6.1.4.1.3582.1.1.200.9022
Adapter-%d: Battery Module Temperature Exceeded Danger Threshold.
TRAP-TYPE    
  rtAdapterNumber  

rtPhysicalDriveStateReady 1.3.6.1.4.1.3582.1.1.200.9023
Adapter-%d, Channel-%d, Target-%d: Drive State Changed from %s to %s.
TRAP-TYPE    
  rtAdapterNumber  
  rtChannelNumber  
  rtTargetID  
  rtOldDriveState  
  rtNewDriveState  

rtPhysicalDriveStateOnline 1.3.6.1.4.1.3582.1.1.200.9024
Adapter-%d, Channel-%d, Target-%d: Drive State Changed from %s to %s.
TRAP-TYPE    
  rtAdapterNumber  
  rtChannelNumber  
  rtTargetID  
  rtOldDriveState  
  rtNewDriveState  

rtPhysicalDriveStateFailed 1.3.6.1.4.1.3582.1.1.200.9025
Adapter-%d, Channel-%d, Target-%d: Drive State Changed from %s to %s.
TRAP-TYPE    
  rtAdapterNumber  
  rtChannelNumber  
  rtTargetID  
  rtOldDriveState  
  rtNewDriveState  

rtPhysicalDriveStateRebuild 1.3.6.1.4.1.3582.1.1.200.9026
Adapter-%d, Channel-%d, Target-%d: Drive State Changed from %s to %s.
TRAP-TYPE    
  rtAdapterNumber  
  rtChannelNumber  
  rtTargetID  
  rtOldDriveState  
  rtNewDriveState  

rtPhysicalDriveStateHotspare 1.3.6.1.4.1.3582.1.1.200.9027
Adapter-%d, Channel-%d, Target-%d: Drive State Changed from %s to %s.
TRAP-TYPE    
  rtAdapterNumber  
  rtChannelNumber  
  rtTargetID  
  rtOldDriveState  
  rtNewDriveState  

rtLogicalDriveStateOffline 1.3.6.1.4.1.3582.1.1.200.9028
Adapter-%d, Logical Drive-%d: State Changed from %s to %s.
TRAP-TYPE    
  rtAdapterNumber  
  rtLogicalDriveNumber  
  rtOldDriveState  
  rtNewDriveState  

rtLogicalDriveStateDegraded 1.3.6.1.4.1.3582.1.1.200.9029
Adapter-%d, Logical Drive-%d: State Changed from %s to %s.
TRAP-TYPE    
  rtAdapterNumber  
  rtLogicalDriveNumber  
  rtOldDriveState  
  rtNewDriveState  

rtLogicalDriveStateOptimal 1.3.6.1.4.1.3582.1.1.200.9030
Adapter-%d, Logical Drive-%d: State Changed from %s to %s.
TRAP-TYPE    
  rtAdapterNumber  
  rtLogicalDriveNumber  
  rtOldDriveState  
  rtNewDriveState  

rtLogicalDriveStateInitialize 1.3.6.1.4.1.3582.1.1.200.9031
Adapter-%d, Logical Drive-%d: State Changed from %s to %s.
TRAP-TYPE    
  rtAdapterNumber  
  rtLogicalDriveNumber  
  rtOldDriveState  
  rtNewDriveState  

rtLogicalDriveStateChkConsist 1.3.6.1.4.1.3582.1.1.200.9032
Adapter-%d, Logical Drive-%d: State Changed from %s to %s.
TRAP-TYPE    
  rtAdapterNumber  
  rtLogicalDriveNumber  
  rtOldDriveState  
  rtNewDriveState  

rtEnclTemperatureOutofRange 1.3.6.1.4.1.3582.1.1.200.9033
Adapter-%d, Channel-%d, Enclosure-%d, Temperature Sensor -%d: Temperature %d is out of Range
TRAP-TYPE    
  rtAdapterNumber  
  rtChannelNumber  
  rtEnclNumber  
  rtEnclTempSensorIndex  
  rtEnclTemperature  

rtEnclTemperatureNormal 1.3.6.1.4.1.3582.1.1.200.9034
Adapter-%d, Channel-%d, Enclosure-%d, Temperature Sensor -%d: Temperature %d is Normal
TRAP-TYPE    
  rtAdapterNumber  
  rtChannelNumber  
  rtEnclNumber  
  rtEnclTempSensorIndex  
  rtEnclTemperature  

rtEnclFanMalfunction 1.3.6.1.4.1.3582.1.1.200.9035
Adapter-%d, Channel-%d, Enclosure-%d, Fan-%d: Fan is Malfunctioning
TRAP-TYPE    
  rtAdapterNumber  
  rtChannelNumber  
  rtEnclNumber  
  rtEnclFanIndex  

rtEnclFanOk 1.3.6.1.4.1.3582.1.1.200.9036
Adapter-%d, Channel-%d, Enclosure-%d, Fan-%d: Fan is operating properly
TRAP-TYPE    
  rtAdapterNumber  
  rtChannelNumber  
  rtEnclNumber  
  rtEnclFanIndex  

rtEnclPowerSupplyMalfunction 1.3.6.1.4.1.3582.1.1.200.9037
Adapter-%d, Channel-%d, Enclosure-%d, Power Supply-%d: Power Supply is Malfunctioning
TRAP-TYPE    
  rtAdapterNumber  
  rtChannelNumber  
  rtEnclNumber  
  rtEnclPowerSupplyIndex  

rtEnclPowerSupplyOk 1.3.6.1.4.1.3582.1.1.200.9038
Adapter-%d, Channel-%d, Enclosure-%d, Power Supply-%d: Power Supply is operating properly
TRAP-TYPE    
  rtAdapterNumber  
  rtChannelNumber  
  rtEnclNumber  
  rtEnclPowerSupplyIndex  

rtFCLooplStateChange 1.3.6.1.4.1.3582.1.1.200.9040
Adapter-%d, LoopId-%d: Loop State Changed from %s to %s.
TRAP-TYPE    
  rtAdapterNumber  
  rtOldLoopID  
  rtOldDriveState  
  rtNewDriveState  

Defined Objects

AdapterEntry  
SEQUENCE    
  INTEGER as adpAdapterNumber  
  INTEGER as numLogicalDrives  
  DisplayString as firmwareVersion  
  DisplayString as biosVersion  
  INTEGER as dramSizeInMB  
  INTEGER as rebuildRateInPercent  
  INTEGER as flushInterval  
  INTEGER as maxConcurrentCmds  
  INTEGER as spinupDelay  
  INTEGER as spinupCount  
  INTEGER as adpIOReadsPerSec  
  INTEGER as adpIOWritesPerSec  
  INTEGER as adpReadKBsPerSec  
  INTEGER as adpWriteKBsPerSec  
  INTEGER as adpReadFailuresPerSec  
  INTEGER as adpWriteFailuresPerSec  
  INTEGER as scanChannels  
  DisplayString as adpBasePort  
  INTEGER as numSCSIChannels  
  INTEGER as numFCLoops  
  INTEGER as subSystemID  
  INTEGER as subSystemVendorID  
  DisplayString as productName  
  INTEGER as adpSpeed  

LogicaldriveEntry  
SEQUENCE    
  INTEGER as ldAdapterNumber  
  INTEGER as logicalDriveNumber  
  INTEGER as status  
  INTEGER as sizeInMB  
  INTEGER as raidLevel  
  INTEGER as stripeSize  
  INTEGER as readPolicy  
  INTEGER as writePolicy  
  INTEGER as cachePolicy  
  DisplayString as enquiryString  
  INTEGER as numberOfSpans  
  INTEGER as numberOfStripes  
  DisplayString as checkConsistencyOrInitializeProgress  
  INTEGER as ldIOReadsPerSec  
  INTEGER as ldIOWritesPerSec  
  INTEGER as ldReadKBsPerSec  
  INTEGER as ldWriteKBsPerSec  
  INTEGER as ldReadFailuresPerSec  
  INTEGER as ldWriteFailuresPerSec  

PhysicaldriveEntry  
SEQUENCE    
  INTEGER as physAdapterNumber  
  INTEGER as physChannel  
  INTEGER as targetID  
  INTEGER as state  
  DisplayString as arrayPosition  
  INTEGER as sizeMB  
  INTEGER as deviceType  
  DisplayString as inquiryString  
  INTEGER as scsiLevel  
  INTEGER as maximumQueueDepth  
  DisplayString as rebuildProgress  
  INTEGER as mediumErrors  
  INTEGER as physSlotStatus  
  INTEGER as physSlotNumber  
  INTEGER as otherErrors  
  INTEGER as physTermination  
  INTEGER as physSpeed  
  INTEGER as lunNumber  

ChannelEntry  
SEQUENCE    
  INTEGER as chanAdapterNumber  
  INTEGER as channel  
  INTEGER as terminations  
  INTEGER as channelStatus  
  INTEGER as channelType  

FcDeviceEntry  
SEQUENCE    
  INTEGER as fcPhysAdapterNumber  
  INTEGER as fcPhysChannel  
  INTEGER as fcTargetId  
  INTEGER as fcLoopID-0  
  INTEGER as fcLoopID-1  
  DisplayString as fcWwn  
  INTEGER as fcState  
  DisplayString as fcArrayPosition  
  INTEGER as fcSizeMB  
  DisplayString as fcInquiryString  
  INTEGER as fcScsiLevel  
  DisplayString as fcRebuildProgress  
  INTEGER as fcMediumErrors  
  INTEGER as fcOtherErrors  

FcChannelEntry  
SEQUENCE    
  INTEGER as fcChanAdapterNumber  
  INTEGER as fcChannel  
  INTEGER as fcLoopNumber  
  INTEGER as fcLoopStatus  
  INTEGER as fcNumberofDevices  
  INTEGER as fcProcessorType  

EnclConfigurationEntry  
SEQUENCE    
  INTEGER as enclAdapterNumber  
  INTEGER as enclNumber  
  INTEGER as enclChannel  
  INTEGER as enclNumDeviceSlots  
  INTEGER as enclNumFans  
  INTEGER as enclNumTempSensors  
  INTEGER as enclNumPowerSupplies  
  INTEGER as enclDoorLockStatus  
  INTEGER as enclAudibleAlarm  
  INTEGER as enclAlarmStatus  
  INTEGER as enclTemperatureScale  
  INTEGER as enclTotalPowerOnMins  
  INTEGER as enclTotalPowerOnCycles  

EnclFanEntry  
SEQUENCE    
  INTEGER as enclNumberFan  
  INTEGER as enclFanIndex  
  INTEGER as enclFanStatus  

EnclPowerSupplyEntry  
SEQUENCE    
  INTEGER as enclNumberPower  
  INTEGER as enclPowerSupplyIndex  
  INTEGER as enclPowerSupplyStatus  

EnclTempSensorsEntry  
SEQUENCE    
  INTEGER as enclNumberTemp  
  INTEGER as enclTempSensorIndex  
  INTEGER as enclTemperature