REDSTONE-DS1-MIB

File: REDSTONE-DS1-MIB.mib (9094 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF IF-MIB
REDSTONE-SMI REDSTONE-TC

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
OBJECT-GROUP MODULE-COMPLIANCE ifIndex
rsMgmt RsTimeSlotMap

Defined Objects

rsDs1MIB 1.3.6.1.4.1.2773.2.5
The T1 MIB for the Redstone Communications Inc. enterprise.
MODULE-IDENTITY    

rsDs1Objects 1.3.6.1.4.1.2773.2.5.1
OBJECT IDENTIFIER    

rsDsx1ConfigTable 1.3.6.1.4.1.2773.2.5.1.1
This table contains entries for DS1/E1 interfaces present in the system.
OBJECT-TYPE    
  SEQUENCE OF  
    RsDsx1ConfigEntry

rsDsx1ConfigEntry 1.3.6.1.4.1.2773.2.5.1.1.1
Each entry describes the characteristics of an DS1/E1 interface.
OBJECT-TYPE    
  RsDsx1ConfigEntry  

rsDsx1TimeSlotMap 1.3.6.1.4.1.2773.2.5.1.1.1.1
A bitmap representing the timeslots on the DS1/E1 interface that have been allocated for service. For channelized DS1/E1, set bits reflect the union of timeslot allocations across all fractional arrangements operating over this DS1/E1 interface. For unchannelized DS1/E1, all relevant timeslot bits will be set.
OBJECT-TYPE    
  RsTimeSlotMap  

rsDsx1Ds1ChannelNumber 1.3.6.1.4.1.2773.2.5.1.1.1.2
This variable represents the channel number of the DS1/E1 on its parent DS3/E3. A value of 0 indicates this DS1/E1 does not have a parent DS3/E3.
OBJECT-TYPE    
  Integer32 0..28  

rsDsx1Capabilities 1.3.6.1.4.1.2773.2.5.1.1.1.3
A value which indicates the set of capabilities of the DS1/E1 interface. The value is a sum. This sum initially takes the value zero, Then, for each capability, C, in the range 1 through 3, that this interface supports, 2 raised to (C - 1) is added to the sum. For example, an interface which is only E1 capable would have a value of 2 (2^(2-1)). In contrast, an interface which is both T1 and J1 capable would have a value of 5 (2^(1-1) + 2^(3-1)). The values for DS1/E1 interface capabilities are as follows: capability function 1 T1 2 E1 3 J1
OBJECT-TYPE    
  Integer32 0..7  

rsDsx1Mode 1.3.6.1.4.1.2773.2.5.1.1.1.4
This variable represents the DS1/E1 interface mode. The value of the rsDsx1Capabilities object for the DS1/E1 interface indicates the valid set of values for this object.
OBJECT-TYPE    
  INTEGER t1(1), e1(2), j1(3)  

rsDsx1LineBuildOutCapabilities 1.3.6.1.4.1.2773.2.5.1.1.1.5
A value which indicates the set of line build out capabilities of the DS1/E1 interface. The value is a sum. This sum initially takes the value zero, Then, for each line build out capability, C, in the range 1 or 2, that this interface supports, 2 raised to (C - 1) is added to the sum. For example, an interface which is only short haul capable would have a value of 2 (2^(2-1)). In contrast, an interface which is both short haul and long haul capable would have a value of 3 (2^(1-1) + 2^(2-1)). The values for DS1/E1 interface line build out capabilities are as follows: line build out capability function 1 short haul 2 long haul
OBJECT-TYPE    
  Integer32 0..3  

rsDsx1LineBuildOutType 1.3.6.1.4.1.2773.2.5.1.1.1.6
This variable represents the configured line build out type of the DS1/E1 interface. The value of the rsDsx1LineBuildOutCapabilities object for the DS1/E1 interface indicates the valid set of values for this object.
OBJECT-TYPE    
  INTEGER shortHaul(1), longHaul(2), notSupported(3)  

rsDsx1LineAttenuation 1.3.6.1.4.1.2773.2.5.1.1.1.7
This variable represents the configured line attenuation of the DS1/E1 interface. Note that the value of this object only takes effect when the value of the rsDsx1LineBuildOutType for the DS1/E1 interface is set to longHaul(2).
OBJECT-TYPE    
  INTEGER db0(1), dbMinus7Point5(2), dbMinus15(3), dbMinus22Point5(4), notSupported(5)  

rsDsx1LineLength 1.3.6.1.4.1.2773.2.5.1.1.1.8
This variable represents the length of the DS1/E1 line in meters. Note that the value of this object only takes effect when the value of the rsDsx1LineBuildOutType for the DS1/E1 interface is set to shortHaul(1).
OBJECT-TYPE    
  Integer32 0..64000  

rsDs1Conformance 1.3.6.1.4.1.2773.2.5.4
OBJECT IDENTIFIER    

rsDs1Compliances 1.3.6.1.4.1.2773.2.5.4.1
OBJECT IDENTIFIER    

rsDs1Compliance 1.3.6.1.4.1.2773.2.5.4.1.1
The compliance statement for entities which implement the Redstone DS1/E1 MIB.
MODULE-COMPLIANCE    

rsDs1Groups 1.3.6.1.4.1.2773.2.5.4.2
OBJECT IDENTIFIER    

rsDs1Group 1.3.6.1.4.1.2773.2.5.4.2.1
A collection of objects providing management of DS1/E1 interfaces in a Redstone product.
OBJECT-GROUP    

Defined Objects

RsDsx1ConfigEntry  
SEQUENCE    
  RsTimeSlotMap as rsDsx1TimeSlotMap  
  Integer32 as rsDsx1Ds1ChannelNumber  
  Integer32 as rsDsx1Capabilities  
  INTEGER as rsDsx1Mode  
  Integer32 as rsDsx1LineBuildOutCapabilities  
  INTEGER as rsDsx1LineBuildOutType  
  INTEGER as rsDsx1LineAttenuation  
  Integer32 as rsDsx1LineLength